diff options
Diffstat (limited to 'drivers')
149 files changed, 2140 insertions, 1441 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 087a7028ae84..b9f923ef173d 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -50,7 +50,6 @@ config ACPI_SLEEP config ACPI_PROCFS bool "Deprecated /proc/acpi files" depends on PROC_FS - default y ---help--- For backwards compatibility, this option allows deprecated /proc/acpi/ files to exist, even when @@ -61,7 +60,6 @@ config ACPI_PROCFS /proc/acpi/info (/sys/modules/acpi/parameters/acpica_version) /proc/acpi/dsdt (/sys/firmware/acpi/tables/DSDT) /proc/acpi/fadt (/sys/firmware/acpi/tables/FACP) - /proc/acpi/battery (/sys/class/power_supply) /proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer) /proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level) @@ -69,7 +67,21 @@ config ACPI_PROCFS and functions which do not yet exist in /sys. Say N to delete /proc/acpi/ files that have moved to /sys/ - +config ACPI_PROCFS_POWER + bool "Deprecated power /proc/acpi folders" + depends on PROC_FS + default y + ---help--- + For backwards compatibility, this option allows + deprecated power /proc/acpi/ folders to exist, even when + they have been replaced by functions in /sys. + The deprecated folders (and their replacements) include: + /proc/acpi/battery/* (/sys/class/power_supply/*) + /proc/acpi/ac_adapter/* (sys/class/power_supply/*) + This option has no effect on /proc/acpi/ folders + and functions, which do not yet exist in /sys + + Say N to delete power /proc/acpi/ folders that have moved to /sys/ config ACPI_PROC_EVENT bool "Deprecated /proc/acpi/event support" depends on PROC_FS diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 54e3ab0e5fc0..456446f90077 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -58,6 +58,6 @@ obj-$(CONFIG_ACPI_NUMA) += numa.o obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o -obj-y += cm_sbs.o +obj-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o obj-$(CONFIG_ACPI_SBS) += sbs.o obj-$(CONFIG_ACPI_SBS) += sbshc.o diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 30238f6ff232..76ed4f52bebd 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -27,7 +27,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/types.h> -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER #include <linux/proc_fs.h> #include <linux/seq_file.h> #endif @@ -51,7 +51,7 @@ MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI AC Adapter Driver"); MODULE_LICENSE("GPL"); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER extern struct proc_dir_entry *acpi_lock_ac_dir(void); extern void *acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir); static int acpi_ac_open_fs(struct inode *inode, struct file *file); @@ -86,7 +86,7 @@ struct acpi_ac { #define to_acpi_ac(x) container_of(x, struct acpi_ac, charger); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER static const struct file_operations acpi_ac_fops = { .open = acpi_ac_open_fs, .read = seq_read, @@ -136,7 +136,7 @@ static int acpi_ac_get_state(struct acpi_ac *ac) return 0; } -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER /* -------------------------------------------------------------------------- FS Interface (/proc) -------------------------------------------------------------------------- */ @@ -275,7 +275,7 @@ static int acpi_ac_add(struct acpi_device *device) if (result) goto end; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER result = acpi_ac_add_fs(device); #endif if (result) @@ -300,7 +300,7 @@ static int acpi_ac_add(struct acpi_device *device) end: if (result) { -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_ac_remove_fs(device); #endif kfree(ac); @@ -339,7 +339,7 @@ static int acpi_ac_remove(struct acpi_device *device, int type) ACPI_ALL_NOTIFY, acpi_ac_notify); if (ac->charger.dev) power_supply_unregister(&ac->charger); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_ac_remove_fs(device); #endif @@ -355,7 +355,7 @@ static int __init acpi_ac_init(void) if (acpi_disabled) return -ENODEV; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_ac_dir = acpi_lock_ac_dir(); if (!acpi_ac_dir) return -ENODEV; @@ -363,7 +363,7 @@ static int __init acpi_ac_init(void) result = acpi_bus_register_driver(&acpi_ac_driver); if (result < 0) { -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_unlock_ac_dir(acpi_ac_dir); #endif return -ENODEV; @@ -377,7 +377,7 @@ static void __exit acpi_ac_exit(void) acpi_bus_unregister_driver(&acpi_ac_driver); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_unlock_ac_dir(acpi_ac_dir); #endif diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 192c244f6190..7d6be23eff89 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -31,7 +31,7 @@ #include <linux/types.h> #include <linux/jiffies.h> -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <asm/uaccess.h> @@ -63,7 +63,7 @@ static unsigned int cache_time = 1000; module_param(cache_time, uint, 0644); MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER extern struct proc_dir_entry *acpi_lock_battery_dir(void); extern void *acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir); @@ -153,6 +153,8 @@ static int acpi_battery_get_property(struct power_supply *psy, val->intval = POWER_SUPPLY_STATUS_CHARGING; else if (battery->state == 0) val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; break; case POWER_SUPPLY_PROP_PRESENT: val->intval = acpi_battery_present(battery); @@ -221,7 +223,7 @@ static enum power_supply_property energy_battery_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, }; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER inline char *acpi_battery_units(struct acpi_battery *battery) { return (battery->power_unit)?"mA":"mW"; @@ -479,7 +481,7 @@ static int acpi_battery_update(struct acpi_battery *battery) FS Interface (/proc) -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER static struct proc_dir_entry *acpi_battery_dir; static int acpi_battery_print_info(struct seq_file *seq, int result) @@ -786,7 +788,7 @@ static int acpi_battery_add(struct acpi_device *device) acpi_driver_data(device) = battery; mutex_init(&battery->lock); acpi_battery_update(battery); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER result = acpi_battery_add_fs(device); if (result) goto end; @@ -804,7 +806,7 @@ static int acpi_battery_add(struct acpi_device *device) device->status.battery_present ? "present" : "absent"); end: if (result) { -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_battery_remove_fs(device); #endif kfree(battery); @@ -823,7 +825,7 @@ static int acpi_battery_remove(struct acpi_device *device, int type) status = acpi_remove_notify_handler(device->handle, ACPI_ALL_NOTIFY, acpi_battery_notify); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_battery_remove_fs(device); #endif sysfs_remove_battery(battery); @@ -859,13 +861,13 @@ static int __init acpi_battery_init(void) { if (acpi_disabled) return -ENODEV; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_battery_dir = acpi_lock_battery_dir(); if (!acpi_battery_dir) return -ENODEV; #endif if (acpi_bus_register_driver(&acpi_battery_driver) < 0) { -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_unlock_battery_dir(acpi_battery_dir); #endif return -ENODEV; @@ -876,7 +878,7 @@ static int __init acpi_battery_init(void) static void __exit acpi_battery_exit(void) { acpi_bus_unregister_driver(&acpi_battery_driver); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_unlock_battery_dir(acpi_battery_dir); #endif } diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 06b78e5e33a1..d411017f8c06 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -47,6 +47,9 @@ #undef PREFIX #define PREFIX "ACPI: EC: " +/* Uncomment next line to get verbose print outs*/ +/* #define DEBUG */ + /* EC status register */ #define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */ #define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */ @@ -75,7 +78,10 @@ enum { EC_FLAGS_WAIT_GPE = 0, /* Don't check status until GPE arrives */ EC_FLAGS_QUERY_PENDING, /* Query is pending */ EC_FLAGS_GPE_MODE, /* Expect GPE to be sent for status change */ - EC_FLAGS_ONLY_IBF_GPE, /* Expect GPE only for IBF = 0 event */ + EC_FLAGS_NO_ADDRESS_GPE, /* Expect GPE only for non-address event */ + EC_FLAGS_ADDRESS, /* Address is being written */ + EC_FLAGS_NO_WDATA_GPE, /* Don't expect WDATA GPE event */ + EC_FLAGS_WDATA, /* Data is being written */ }; static int acpi_ec_remove(struct acpi_device *device, int type); @@ -131,21 +137,27 @@ static struct acpi_ec { static inline u8 acpi_ec_read_status(struct acpi_ec *ec) { - return inb(ec->command_addr); + u8 x = inb(ec->command_addr); + pr_debug(PREFIX "---> status = 0x%2x\n", x); + return x; } static inline u8 acpi_ec_read_data(struct acpi_ec *ec) { + u8 x = inb(ec->data_addr); + pr_debug(PREFIX "---> data = 0x%2x\n", x); return inb(ec->data_addr); } static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command) { + pr_debug(PREFIX "<--- command = 0x%2x\n", command); outb(command, ec->command_addr); } static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) { + pr_debug(PREFIX "<--- data = 0x%2x\n", data); outb(data, ec->data_addr); } @@ -166,38 +178,54 @@ static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event) static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) { + int ret = 0; + if (unlikely(test_bit(EC_FLAGS_ADDRESS, &ec->flags) && + test_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags))) + force_poll = 1; + if (unlikely(test_bit(EC_FLAGS_WDATA, &ec->flags) && + test_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags))) + force_poll = 1; if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) && likely(!force_poll)) { if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, event), msecs_to_jiffies(ACPI_EC_DELAY))) - return 0; + goto end; clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); if (acpi_ec_check_status(ec, event)) { - if (event == ACPI_EC_EVENT_OBF_1) { - /* miss OBF = 1 GPE, don't expect it anymore */ - printk(KERN_INFO PREFIX "missing OBF_1 confirmation," - "switching to degraded mode.\n"); - set_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags); + if (test_bit(EC_FLAGS_ADDRESS, &ec->flags)) { + /* miss address GPE, don't expect it anymore */ + pr_info(PREFIX "missing address confirmation, " + "don't expect it any longer.\n"); + set_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags); + } else if (test_bit(EC_FLAGS_WDATA, &ec->flags)) { + /* miss write data GPE, don't expect it */ + pr_info(PREFIX "missing write data confirmation, " + "don't expect it any longer.\n"); + set_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags); } else { /* missing GPEs, switch back to poll mode */ - printk(KERN_INFO PREFIX "missing IBF_1 confirmations," - "switch off interrupt mode.\n"); + if (printk_ratelimit()) + pr_info(PREFIX "missing confirmations, " + "switch off interrupt mode.\n"); clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); } - return 0; + goto end; } } else { unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY); clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); while (time_before(jiffies, delay)) { if (acpi_ec_check_status(ec, event)) - return 0; + goto end; } } - printk(KERN_ERR PREFIX "acpi_ec_wait timeout," + pr_err(PREFIX "acpi_ec_wait timeout," " status = %d, expect_event = %d\n", acpi_ec_read_status(ec), event); - return -ETIME; + ret = -ETIME; + end: + clear_bit(EC_FLAGS_ADDRESS, &ec->flags); + return ret; } static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command, @@ -208,22 +236,26 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command, int result = 0; set_bit(EC_FLAGS_WAIT_GPE, &ec->flags); acpi_ec_write_cmd(ec, command); - + pr_debug(PREFIX "transaction start\n"); for (; wdata_len > 0; --wdata_len) { result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll); if (result) { - printk(KERN_ERR PREFIX + pr_err(PREFIX "write_cmd timeout, command = %d\n", command); goto end; } + /* mark the address byte written to EC */ + if (rdata_len + wdata_len > 1) + set_bit(EC_FLAGS_ADDRESS, &ec->flags); set_bit(EC_FLAGS_WAIT_GPE, &ec->flags); acpi_ec_write_data(ec, *(wdata++)); } if (!rdata_len) { + set_bit(EC_FLAGS_WDATA, &ec->flags); result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll); if (result) { - printk(KERN_ERR PREFIX + pr_err(PREFIX "finish-write timeout, command = %d\n", command); goto end; } @@ -231,12 +263,9 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command, clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); for (; rdata_len > 0; --rdata_len) { - if (test_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags)) - force_poll = 1; result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll); if (result) { - printk(KERN_ERR PREFIX "read timeout, command = %d\n", - command); + pr_err(PREFIX "read timeout, command = %d\n", command); goto end; } /* Don't expect GPE after last read */ @@ -245,6 +274,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command, *(rdata++) = acpi_ec_read_data(ec); } end: + pr_debug(PREFIX "transaction end\n"); return result; } @@ -273,8 +303,8 @@ static int acpi_ec_transaction(struct acpi_ec *ec, u8 command, status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0); if (status) { - printk(KERN_ERR PREFIX - "input buffer is not empty, aborting transaction\n"); + pr_err(PREFIX "input buffer is not empty, " + "aborting transaction\n"); goto end; } @@ -488,6 +518,7 @@ static u32 acpi_ec_gpe_handler(void *data) acpi_status status = AE_OK; struct acpi_ec *ec = data; + pr_debug(PREFIX "~~~> interrupt\n"); clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) wake_up(&ec->wait); @@ -498,8 +529,9 @@ static u32 acpi_ec_gpe_handler(void *data) acpi_ec_gpe_query, ec); } else if (unlikely(!test_bit(EC_FLAGS_GPE_MODE, &ec->flags))) { /* this is non-query, must be confirmation */ - printk(KERN_INFO PREFIX "non-query interrupt received," - " switching to interrupt mode\n"); + if (printk_ratelimit()) + pr_info(PREFIX "non-query interrupt received," + " switching to interrupt mode\n"); set_bit(EC_FLAGS_GPE_MODE, &ec->flags); } @@ -701,10 +733,10 @@ static void ec_remove_handlers(struct acpi_ec *ec) { if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler))) - printk(KERN_ERR PREFIX "failed to remove space handler\n"); + pr_err(PREFIX "failed to remove space handler\n"); if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe, &acpi_ec_gpe_handler))) - printk(KERN_ERR PREFIX "failed to remove gpe handler\n"); + pr_err(PREFIX "failed to remove gpe handler\n"); ec->handlers_installed = 0; } @@ -747,9 +779,9 @@ static int acpi_ec_add(struct acpi_device *device) first_ec = ec; acpi_driver_data(device) = ec; acpi_ec_add_fs(device); - printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", + pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", ec->gpe, ec->command_addr, ec->data_addr); - printk(KERN_INFO PREFIX "driver started in %s mode\n", + pr_info(PREFIX "driver started in %s mode\n", (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll"); return 0; } @@ -875,18 +907,26 @@ int __init acpi_ec_ecdt_probe(void) status = acpi_get_table(ACPI_SIG_ECDT, 1, (struct acpi_table_header **)&ecdt_ptr); if (ACPI_SUCCESS(status)) { - printk(KERN_INFO PREFIX "EC description table is found, configuring boot EC\n"); + pr_info(PREFIX "EC description table is found, configuring boot EC\n"); boot_ec->command_addr = ecdt_ptr->control.address; boot_ec->data_addr = ecdt_ptr->data.address; boot_ec->gpe = ecdt_ptr->gpe; boot_ec->handle = ACPI_ROOT_OBJECT; } else { + /* This workaround is needed only on some broken machines, + * which require early EC, but fail to provide ECDT */ + acpi_handle x; printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n"); status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device, boot_ec, NULL); /* Check that acpi_get_devices actually find something */ if (ACPI_FAILURE(status) || !boot_ec->handle) goto error; + /* We really need to limit this workaround, the only ASUS, + * which needs it, has fake EC._INI method, so use it as flag. + */ + if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &x))) + goto error; } ret = ec_install_handlers(boot_ec); diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index aabc6ca4a81c..e3a673a00845 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -387,17 +387,14 @@ acpi_status acpi_os_read_port(acpi_io_address port, u32 * value, u32 width) if (!value) value = &dummy; - switch (width) { - case 8: + *value = 0; + if (width <= 8) { *(u8 *) value = inb(port); - break; - case 16: + } else if (width <= 16) { *(u16 *) value = inw(port); - break; - case 32: + } else if (width <= 32) { *(u32 *) value = inl(port); - break; - default: + } else { BUG(); } @@ -408,17 +405,13 @@ EXPORT_SYMBOL(acpi_os_read_port); acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width) { - switch (width) { - case 8: + if (width <= 8) { outb(value, port); - break; - case 16: + } else if (width <= 16) { outw(value, port); - break; - case 32: + } else if (width <= 32) { outl(value, port); - break; - default: + } else { BUG(); } diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 235a51e328c3..e48ee4f8749f 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -494,7 +494,7 @@ static int get_cpu_id(acpi_handle handle, u32 acpi_id) if (apic_id == -1) return apic_id; - for (i = 0; i < NR_CPUS; ++i) { + for_each_possible_cpu(i) { if (cpu_physical_id(i) == apic_id) return i; } @@ -612,12 +612,6 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) request_region(pr->throttling.address, 6, "ACPI CPU throttle"); } -#ifdef CONFIG_CPU_FREQ - acpi_processor_ppc_has_changed(pr); -#endif - acpi_processor_get_throttling_info(pr); - acpi_processor_get_limit_info(pr); - return 0; } @@ -638,7 +632,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) return 0; } - BUG_ON((pr->id >= NR_CPUS) || (pr->id < 0)); + BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0)); /* * Buggy BIOS check @@ -647,7 +641,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) */ if (processor_device_array[pr->id] != NULL && processor_device_array[pr->id] != device) { - printk(KERN_WARNING "BIOS reported wrong ACPI id" + printk(KERN_WARNING "BIOS reported wrong ACPI id " "for the processor\n"); return -ENODEV; } @@ -665,6 +659,12 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) /* _PDC call should be done before doing anything else (if reqd.). */ arch_acpi_processor_init_pdc(pr); acpi_processor_set_pdc(pr); +#ifdef CONFIG_CPU_FREQ + acpi_processor_ppc_has_changed(pr); +#endif + acpi_processor_get_throttling_info(pr); + acpi_processor_get_limit_info(pr); + acpi_processor_power_init(pr, device); @@ -684,7 +684,7 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) { struct acpi_processor *pr = data; struct acpi_device *device = NULL; - + int saved; if (!pr) return; @@ -694,7 +694,10 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) switch (event) { case ACPI_PROCESSOR_NOTIFY_PERFORMANCE: + saved = pr->performance_platform_limit; acpi_processor_ppc_has_changed(pr); + if (saved == pr->performance_platform_limit) + break; acpi_bus_generate_proc_event(device, event, pr->performance_platform_limit); acpi_bus_generate_netlink_event(device->pnp.device_class, @@ -771,7 +774,7 @@ static int acpi_processor_remove(struct acpi_device *device, int type) pr = acpi_driver_data(device); - if (pr->id >= NR_CPUS) { + if (pr->id >= nr_cpu_ids) { kfree(pr); return 0; } @@ -842,7 +845,7 @@ int acpi_processor_device_add(acpi_handle handle, struct acpi_device **device) if (!pr) return -ENODEV; - if ((pr->id >= 0) && (pr->id < NR_CPUS)) { + if ((pr->id >= 0) && (pr->id < nr_cpu_ids)) { kobject_uevent(&(*device)->dev.kobj, KOBJ_ONLINE); } return 0; @@ -880,13 +883,13 @@ acpi_processor_hotplug_notify(acpi_handle handle, u32 event, void *data) break; } - if (pr->id >= 0 && (pr->id < NR_CPUS)) { + if (pr->id >= 0 && (pr->id < nr_cpu_ids)) { kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE); break; } result = acpi_processor_start(device); - if ((!result) && ((pr->id >= 0) && (pr->id < NR_CPUS))) { + if ((!result) && ((pr->id >= 0) && (pr->id < nr_cpu_ids))) { kobject_uevent(&device->dev.kobj, KOBJ_ONLINE); } else { printk(KERN_ERR PREFIX "Device [%s] failed to start\n", @@ -909,7 +912,7 @@ acpi_processor_hotplug_notify(acpi_handle handle, u32 event, void *data) return; } - if ((pr->id < NR_CPUS) && (cpu_present(pr->id))) + if ((pr->id < nr_cpu_ids) && (cpu_present(pr->id))) kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE); break; default: diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f996d0e37689..b1fbee3f7fe1 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -197,6 +197,19 @@ static inline u32 ticks_elapsed_in_us(u32 t1, u32 t2) return PM_TIMER_TICKS_TO_US((0xFFFFFFFF - t1) + t2); } +static void acpi_safe_halt(void) +{ + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we + * test NEED_RESCHED: + */ + smp_mb(); + if (!need_resched()) + safe_halt(); + current_thread_info()->status |= TS_POLLING; +} + #ifndef CONFIG_CPU_IDLE static void @@ -239,19 +252,6 @@ acpi_processor_power_activate(struct acpi_processor *pr, return; } -static void acpi_safe_halt(void) -{ - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - if (!need_resched()) - safe_halt(); - current_thread_info()->status |= TS_POLLING; -} - static atomic_t c3_cpu_count; /* Common C-state entry for C2, C3, .. */ @@ -1373,15 +1373,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, if (pr->flags.bm_check) acpi_idle_update_bm_rld(pr, cx); - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we test - * NEED_RESCHED: - */ - smp_mb(); - if (!need_resched()) - safe_halt(); - current_thread_info()->status |= TS_POLLING; + acpi_safe_halt(); cx->usage++; @@ -1399,6 +1391,8 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, struct acpi_processor *pr; struct acpi_processor_cx *cx = cpuidle_get_statedata(state); u32 t1, t2; + int sleep_ticks = 0; + pr = processors[smp_processor_id()]; if (unlikely(!pr)) @@ -1428,6 +1422,8 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, ACPI_FLUSH_CPU_CACHE(); t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); + /* Tell the scheduler that we are going deep-idle: */ + sched_clock_idle_sleep_event(); acpi_state_timer_broadcast(pr, cx, 1); acpi_idle_do_entry(cx); t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); @@ -1436,6 +1432,10 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, /* TSC could halt in idle, so notify users */ mark_tsc_unstable("TSC halts in idle");; #endif + sleep_ticks = ticks_elapsed(t1, t2); + + /* Tell the scheduler how much we idled: */ + sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); local_irq_enable(); current_thread_info()->status |= TS_POLLING; @@ -1443,7 +1443,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, cx->usage++; acpi_state_timer_broadcast(pr, cx, 0); - cx->time += ticks_elapsed(t1, t2); + cx->time += sleep_ticks; return ticks_elapsed_in_us(t1, t2); } @@ -1463,6 +1463,8 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, struct acpi_processor *pr; struct acpi_processor_cx *cx = cpuidle_get_statedata(state); u32 t1, t2; + int sleep_ticks = 0; + pr = processors[smp_processor_id()]; if (unlikely(!pr)) @@ -1471,6 +1473,15 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, if (acpi_idle_suspend) return(acpi_idle_enter_c1(dev, state)); + if (acpi_idle_bm_check()) { + if (dev->safe_state) { + return dev->safe_state->enter(dev, dev->safe_state); + } else { + acpi_safe_halt(); + return 0; + } + } + local_irq_disable(); current_thread_info()->status &= ~TS_POLLING; /* @@ -1485,38 +1496,45 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, return 0; } + /* Tell the scheduler that we are going deep-idle: */ + sched_clock_idle_sleep_event(); /* * Must be done before busmaster disable as we might need to * access HPET ! */ acpi_state_timer_broadcast(pr, cx, 1); - if (acpi_idle_bm_check()) { - cx = pr->power.bm_state; - - acpi_idle_update_bm_rld(pr, cx); - - t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); - acpi_idle_do_entry(cx); - t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); - } else { - acpi_idle_update_bm_rld(pr, cx); + acpi_idle_update_bm_rld(pr, cx); + /* + * disable bus master + * bm_check implies we need ARB_DIS + * !bm_check implies we need cache flush + * bm_control implies whether we can do ARB_DIS + * + * That leaves a case where bm_check is set and bm_control is + * not set. In that case we cannot do much, we enter C3 + * without doing anything. + */ + if (pr->flags.bm_check && pr->flags.bm_control) { spin_lock(&c3_lock); c3_cpu_count++; /* Disable bus master arbitration when all CPUs are in C3 */ if (c3_cpu_count == num_online_cpus()) acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1); spin_unlock(&c3_lock); + } else if (!pr->flags.bm_check) { + ACPI_FLUSH_CPU_CACHE(); + } - t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); - acpi_idle_do_entry(cx); - t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); + t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); + acpi_idle_do_entry(cx); + t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); + /* Re-enable bus master arbitration */ + if (pr->flags.bm_check && pr->flags.bm_control) { spin_lock(&c3_lock); - /* Re-enable bus master arbitration */ - if (c3_cpu_count == num_online_cpus()) - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); + acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); c3_cpu_count--; spin_unlock(&c3_lock); } @@ -1525,6 +1543,9 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, /* TSC could halt in idle, so notify users */ mark_tsc_unstable("TSC halts in idle"); #endif + sleep_ticks = ticks_elapsed(t1, t2); + /* Tell the scheduler how much we idled: */ + sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); local_irq_enable(); current_thread_info()->status |= TS_POLLING; @@ -1532,7 +1553,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, cx->usage++; acpi_state_timer_broadcast(pr, cx, 0); - cx->time += ticks_elapsed(t1, t2); + cx->time += sleep_ticks; return ticks_elapsed_in_us(t1, t2); } @@ -1584,12 +1605,14 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) case ACPI_STATE_C1: state->flags |= CPUIDLE_FLAG_SHALLOW; state->enter = acpi_idle_enter_c1; + dev->safe_state = state; break; case ACPI_STATE_C2: state->flags |= CPUIDLE_FLAG_BALANCED; state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_simple; + dev->safe_state = state; break; case ACPI_STATE_C3: @@ -1610,14 +1633,6 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) if (!count) return -EINVAL; - /* find the deepest state that can handle active BM */ - if (pr->flags.bm_check) { - for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) - if (pr->power.states[i].type == ACPI_STATE_C3) - break; - pr->power.bm_state = &pr->power.states[i-1]; - } - return 0; } @@ -1658,6 +1673,7 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, if (!first_run) { dmi_check_system(processor_power_dmi_table); + max_cstate = acpi_processor_cstate_check(max_cstate); if (max_cstate < ACPI_C_STATES_MAX) printk(KERN_NOTICE "ACPI: processor limited to max C-state %d\n", diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 0b8204e7082a..c26c61fb36c3 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -70,7 +70,55 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr) int acpi_processor_tstate_has_changed(struct acpi_processor *pr) { - return acpi_processor_get_platform_limit(pr); + int result = 0; + int throttling_limit; + int current_state; + struct acpi_processor_limit *limit; + int target_state; + + result = acpi_processor_get_platform_limit(pr); + if (result) { + /* Throttling Limit is unsupported */ + return result; + } + + throttling_limit = pr->throttling_platform_limit; + if (throttling_limit >= pr->throttling.state_count) { + /* Uncorrect Throttling Limit */ + return -EINVAL; + } + + current_state = pr->throttling.state; + if (current_state > throttling_limit) { + /* + * The current state can meet the requirement of + * _TPC limit. But it is reasonable that OSPM changes + * t-states from high to low for better performance. + * Of course the limit condition of thermal + * and user should be considered. + */ + limit = &pr->limit; + target_state = throttling_limit; + if (limit->thermal.tx > target_state) + target_state = limit->thermal.tx; + if (limit->user.tx > target_state) + target_state = limit->user.tx; + } else if (current_state == throttling_limit) { + /* + * Unnecessary to change the throttling state + */ + return 0; + } else { + /* + * If the current state is lower than the limit of _TPC, it + * will be forced to switch to the throttling state defined + * by throttling_platfor_limit. + * Because the previous state meets with the limit condition + * of thermal and user, it is unnecessary to check it again. + */ + target_state = throttling_limit; + } + return acpi_processor_set_throttling(pr, target_state); } /* @@ -83,6 +131,7 @@ static int acpi_processor_get_throttling_control(struct acpi_processor *pr) struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *ptc = NULL; union acpi_object obj = { 0 }; + struct acpi_processor_throttling *throttling; status = acpi_evaluate_object(pr->handle, "_PTC", NULL, &buffer); if (ACPI_FAILURE(status)) { @@ -134,6 +183,22 @@ static int acpi_processor_get_throttling_control(struct acpi_processor *pr) memcpy(&pr->throttling.status_register, obj.buffer.pointer, sizeof(struct acpi_ptc_register)); + throttling = &pr->throttling; + + if ((throttling->control_register.bit_width + + throttling->control_register.bit_offset) > 32) { + printk(KERN_ERR PREFIX "Invalid _PTC control register\n"); + result = -EFAULT; + goto end; + } + + if ((throttling->status_register.bit_width + + throttling->status_register.bit_offset) > 32) { + printk(KERN_ERR PREFIX "Invalid _PTC status register\n"); + result = -EFAULT; + goto end; + } + end: kfree(buffer.pointer); @@ -328,44 +393,132 @@ static int acpi_processor_get_throttling_fadt(struct acpi_processor *pr) return 0; } -static int acpi_read_throttling_status(struct acpi_processor_throttling - *throttling) +#ifdef CONFIG_X86 +static int acpi_throttling_rdmsr(struct acpi_processor *pr, + acpi_integer * value) { - int value = -1; + struct cpuinfo_x86 *c; + u64 msr_high, msr_low; + unsigned int cpu; + u64 msr = 0; + int ret = -1; + + cpu = pr->id; + c = &cpu_data(cpu); + + if ((c->x86_vendor != X86_VENDOR_INTEL) || + !cpu_has(c, X86_FEATURE_ACPI)) { + printk(KERN_ERR PREFIX + "HARDWARE addr space,NOT supported yet\n"); + } else { + msr_low = 0; + msr_high = 0; + rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, + (u32 *)&msr_low , (u32 *) &msr_high); + msr = (msr_high << 32) | msr_low; + *value = (acpi_integer) msr; + ret = 0; + } + return ret; +} + +static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value) +{ + struct cpuinfo_x86 *c; + unsigned int cpu; + int ret = -1; + u64 msr; + + cpu = pr->id; + c = &cpu_data(cpu); + + if ((c->x86_vendor != X86_VENDOR_INTEL) || + !cpu_has(c, X86_FEATURE_ACPI)) { + printk(KERN_ERR PREFIX + "HARDWARE addr space,NOT supported yet\n"); + } else { + msr = value; + wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, + msr & 0xffffffff, msr >> 32); + ret = 0; + } + return ret; +} +#else +static int acpi_throttling_rdmsr(struct acpi_processor *pr, + acpi_integer * value) +{ + printk(KERN_ERR PREFIX + "HARDWARE addr space,NOT supported yet\n"); + return -1; +} + +static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value) +{ + printk(KERN_ERR PREFIX + "HARDWARE addr space,NOT supported yet\n"); + return -1; +} +#endif + +static int acpi_read_throttling_status(struct acpi_processor *pr, + acpi_integer *value) +{ + u32 bit_width, bit_offset; + u64 ptc_value; + u64 ptc_mask; + struct acpi_processor_throttling *throttling; + int ret = -1; + + throttling = &pr->throttling; switch (throttling->status_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: + ptc_value = 0; + bit_width = throttling->status_register.bit_width; + bit_offset = throttling->status_register.bit_offset; + acpi_os_read_port((acpi_io_address) throttling->status_register. - address, &value, - (u32) throttling->status_register.bit_width * - 8); + address, (u32 *) &ptc_value, + (u32) (bit_width + bit_offset)); + ptc_mask = (1 << bit_width) - 1; + *value = (acpi_integer) ((ptc_value >> bit_offset) & ptc_mask); + ret = 0; break; case ACPI_ADR_SPACE_FIXED_HARDWARE: - printk(KERN_ERR PREFIX - "HARDWARE addr space,NOT supported yet\n"); + ret = acpi_throttling_rdmsr(pr, value); break; default: printk(KERN_ERR PREFIX "Unknown addr space %d\n", (u32) (throttling->status_register.space_id)); } - return value; + return ret; } -static int acpi_write_throttling_state(struct acpi_processor_throttling - *throttling, int value) +static int acpi_write_throttling_state(struct acpi_processor *pr, + acpi_integer value) { + u32 bit_width, bit_offset; + u64 ptc_value; + u64 ptc_mask; + struct acpi_processor_throttling *throttling; int ret = -1; + throttling = &pr->throttling; switch (throttling->control_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: + bit_width = throttling->control_register.bit_width; + bit_offset = throttling->control_register.bit_offset; + ptc_mask = (1 << bit_width) - 1; + ptc_value = value & ptc_mask; + acpi_os_write_port((acpi_io_address) throttling-> - control_register.address, value, - (u32) throttling->control_register. - bit_width * 8); + control_register.address, + (u32) (ptc_value << bit_offset), + (u32) (bit_width + bit_offset)); ret = 0; break; case ACPI_ADR_SPACE_FIXED_HARDWARE: - printk(KERN_ERR PREFIX - "HARDWARE addr space,NOT supported yet\n"); + ret = acpi_throttling_wrmsr(pr, value); break; default: printk(KERN_ERR PREFIX "Unknown addr space %d\n", @@ -374,7 +527,8 @@ static int acpi_write_throttling_state(struct acpi_processor_throttling return ret; } -static int acpi_get_throttling_state(struct acpi_processor *pr, int value) +static int acpi_get_throttling_state(struct acpi_processor *pr, + acpi_integer value) { int i; @@ -390,22 +544,26 @@ static int acpi_get_throttling_state(struct acpi_processor *pr, int value) return i; } -static int acpi_get_throttling_value(struct acpi_processor *pr, int state) +static int acpi_get_throttling_value(struct acpi_processor *pr, + int state, acpi_integer *value) { - int value = -1; + int ret = -1; + if (state >= 0 && state <= pr->throttling.state_count) { struct acpi_processor_tx_tss *tx = (struct acpi_processor_tx_tss *)&(pr->throttling. states_tss[state]); - value = tx->control; + *value = tx->control; + ret = 0; } - return value; + return ret; } static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) { int state = 0; - u32 value = 0; + int ret; + acpi_integer value; if (!pr) return -EINVAL; @@ -415,8 +573,9 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) pr->throttling.state = 0; local_irq_disable(); - value = acpi_read_throttling_status(&pr->throttling); - if (value >= 0) { + value = 0; + ret = acpi_read_throttling_status(pr, &value); + if (ret >= 0) { state = acpi_get_throttling_state(pr, value); pr->throttling.state = state; } @@ -430,6 +589,40 @@ static int acpi_processor_get_throttling(struct acpi_processor *pr) return pr->throttling.acpi_processor_get_throttling(pr); } +static int acpi_processor_get_fadt_info(struct acpi_processor *pr) +{ + int i, step; + + if (!pr->throttling.address) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n")); + return -EINVAL; + } else if (!pr->throttling.duty_width) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n")); + return -EINVAL; + } + /* TBD: Support duty_cycle values that span bit 4. */ + else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) { + printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n"); + return -EINVAL; + } + + pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width; + + /* + * Compute state values. Note that throttling displays a linear power + * performance relationship (at 50% performance the CPU will consume + * 50% power). Values are in 1/10th of a percent to preserve accuracy. + */ + + step = (1000 / pr->throttling.state_count); + + for (i = 0; i < pr->throttling.state_count; i++) { + pr->throttling.states[i].performance = 1000 - step * i; + pr->throttling.states[i].power = 1000 - step * i; + } + return 0; +} + static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr, int state) { @@ -506,7 +699,8 @@ static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr, static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, int state) { - u32 value = 0; + int ret; + acpi_integer value; if (!pr) return -EINVAL; @@ -524,10 +718,10 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, return -EPERM; local_irq_disable(); - - value = acpi_get_throttling_value(pr, state); - if (value >= 0) { - acpi_write_throttling_state(&pr->throttling, value); + value = 0; + ret = acpi_get_throttling_value(pr, state, &value); + if (ret >= 0) { + acpi_write_throttling_state(pr, value); pr->throttling.state = state; } local_irq_enable(); @@ -543,8 +737,6 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state) int acpi_processor_get_throttling_info(struct acpi_processor *pr) { int result = 0; - int step = 0; - int i = 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", @@ -563,6 +755,8 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) acpi_processor_get_throttling_states(pr) || acpi_processor_get_platform_limit(pr)) { + if (acpi_processor_get_fadt_info(pr)) + return 0; pr->throttling.acpi_processor_get_throttling = &acpi_processor_get_throttling_fadt; pr->throttling.acpi_processor_set_throttling = @@ -576,19 +770,6 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) acpi_processor_get_tsd(pr); - if (!pr->throttling.address) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n")); - return 0; - } else if (!pr->throttling.duty_width) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n")); - return 0; - } - /* TBD: Support duty_cycle values that span bit 4. */ - else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) { - printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n"); - return 0; - } - /* * PIIX4 Errata: We don't support throttling on the original PIIX4. * This shouldn't be an issue as few (if any) mobile systems ever @@ -600,21 +781,6 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) return 0; } - pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width; - - /* - * Compute state values. Note that throttling displays a linear power/ - * performance relationship (at 50% performance the CPU will consume - * 50% power). Values are in 1/10th of a percent to preserve accuracy. - */ - - step = (1000 / pr->throttling.state_count); - - for (i = 0; i < pr->throttling.state_count; i++) { - pr->throttling.states[i].performance = step * i; - pr->throttling.states[i].power = step * i; - } - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n", pr->throttling.state_count)); diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index 90fd09c65f95..6045cdbe176b 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -29,7 +29,7 @@ #include <linux/moduleparam.h> #include <linux/kernel.h> -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <asm/uaccess.h> @@ -88,7 +88,7 @@ MODULE_DEVICE_TABLE(acpi, sbs_device_ids); struct acpi_battery { struct power_supply bat; struct acpi_sbs *sbs; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER struct proc_dir_entry *proc_entry; #endif unsigned long update_time; @@ -113,6 +113,7 @@ struct acpi_battery { u16 spec; u8 id; u8 present:1; + u8 have_sysfs_alarm:1; }; #define to_acpi_battery(x) container_of(x, struct acpi_battery, bat); @@ -122,7 +123,7 @@ struct acpi_sbs { struct acpi_device *device; struct acpi_smb_hc *hc; struct mutex lock; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER struct proc_dir_entry *charger_entry; #endif struct acpi_battery battery[MAX_SBS_BAT]; @@ -468,7 +469,7 @@ static struct device_attribute alarm_attr = { FS Interface (/proc/acpi) -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER /* Generic Routines */ static int acpi_sbs_add_fs(struct proc_dir_entry **dir, @@ -789,7 +790,7 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) return result; sprintf(battery->name, ACPI_BATTERY_DIR_NAME, id); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_sbs_add_fs(&battery->proc_entry, acpi_battery_dir, battery->name, &acpi_battery_info_fops, &acpi_battery_state_fops, &acpi_battery_alarm_fops, @@ -808,7 +809,13 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) } battery->bat.get_property = acpi_sbs_battery_get_property; result = power_supply_register(&sbs->device->dev, &battery->bat); - device_create_file(battery->bat.dev, &alarm_attr); + if (result) + goto end; + result = device_create_file(battery->bat.dev, &alarm_attr); + if (result) + goto end; + battery->have_sysfs_alarm = 1; + end: printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n", ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device), battery->name, sbs->battery->present ? "present" : "absent"); @@ -817,14 +824,16 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) static void acpi_battery_remove(struct acpi_sbs *sbs, int id) { - if (sbs->battery[id].bat.dev) - device_remove_file(sbs->battery[id].bat.dev, &alarm_attr); - power_supply_unregister(&sbs->battery[id].bat); -#ifdef CONFIG_ACPI_PROCFS - if (sbs->battery[id].proc_entry) { - acpi_sbs_remove_fs(&(sbs->battery[id].proc_entry), - acpi_battery_dir); + struct acpi_battery *battery = &sbs->battery[id]; + + if (battery->bat.dev) { + if (battery->have_sysfs_alarm) + device_remove_file(battery->bat.dev, &alarm_attr); + power_supply_unregister(&battery->bat); } +#ifdef CONFIG_ACPI_PROCFS_POWER + if (battery->proc_entry) + acpi_sbs_remove_fs(&battery->proc_entry, acpi_battery_dir); #endif } @@ -835,7 +844,7 @@ static int acpi_charger_add(struct acpi_sbs *sbs) result = acpi_ac_get_present(sbs); if (result) goto end; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER result = acpi_sbs_add_fs(&sbs->charger_entry, acpi_ac_dir, ACPI_AC_DIR_NAME, NULL, &acpi_ac_state_fops, NULL, sbs); @@ -859,7 +868,7 @@ static void acpi_charger_remove(struct acpi_sbs *sbs) { if (sbs->charger.dev) power_supply_unregister(&sbs->charger); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER if (sbs->charger_entry) acpi_sbs_remove_fs(&sbs->charger_entry, acpi_ac_dir); #endif @@ -965,7 +974,7 @@ static int acpi_sbs_remove(struct acpi_device *device, int type) static void acpi_sbs_rmdirs(void) { -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER if (acpi_ac_dir) { acpi_unlock_ac_dir(acpi_ac_dir); acpi_ac_dir = NULL; @@ -1004,7 +1013,7 @@ static int __init acpi_sbs_init(void) if (acpi_disabled) return -ENODEV; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_ac_dir = acpi_lock_ac_dir(); if (!acpi_ac_dir) return -ENODEV; diff --git a/drivers/acpi/tables/tbutils.c b/drivers/acpi/tables/tbutils.c index 5f1d85f2ffe4..010f19652f80 100644 --- a/drivers/acpi/tables/tbutils.c +++ b/drivers/acpi/tables/tbutils.c @@ -449,7 +449,7 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags) /* XSDT has NULL entry, RSDT is used */ address = rsdt_address; table_entry_size = sizeof(u32); - ACPI_WARNING((AE_INFO, "BIOS XSDT has NULL entry," + ACPI_WARNING((AE_INFO, "BIOS XSDT has NULL entry, " "using RSDT")); } } diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index bac956b30c57..44a0d9ba9bd6 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -29,6 +29,7 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/list.h> +#include <linux/mutex.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/input.h> @@ -135,8 +136,8 @@ struct acpi_video_bus { u8 attached_count; struct acpi_video_bus_cap cap; struct acpi_video_bus_flags flags; - struct semaphore sem; struct list_head video_device_list; + struct mutex device_list_lock; /* protects video_device_list */ struct proc_dir_entry *dir; struct input_dev *input; char phys[32]; /* for input device */ @@ -896,7 +897,7 @@ acpi_video_device_write_brightness(struct file *file, { struct seq_file *m = file->private_data; struct acpi_video_device *dev = m->private; - char str[4] = { 0 }; + char str[5] = { 0 }; unsigned int level = 0; int i; @@ -1436,9 +1437,9 @@ acpi_video_bus_get_one_device(struct acpi_device *device, return -ENODEV; } - down(&video->sem); + mutex_lock(&video->device_list_lock); list_add_tail(&data->entry, &video->video_device_list); - up(&video->sem); + mutex_unlock(&video->device_list_lock); acpi_video_device_add_fs(device); @@ -1462,12 +1463,14 @@ acpi_video_bus_get_one_device(struct acpi_device *device, static void acpi_video_device_rebind(struct acpi_video_bus *video) { - struct list_head *node, *next; - list_for_each_safe(node, next, &video->video_device_list) { - struct acpi_video_device *dev = - container_of(node, struct acpi_video_device, entry); + struct acpi_video_device *dev; + + mutex_lock(&video->device_list_lock); + + list_for_each_entry(dev, &video->video_device_list, entry) acpi_video_device_bind(video, dev); - } + + mutex_unlock(&video->device_list_lock); } /* @@ -1592,30 +1595,33 @@ static int acpi_video_device_enumerate(struct acpi_video_bus *video) static int acpi_video_switch_output(struct acpi_video_bus *video, int event) { - struct list_head *node, *next; + struct list_head *node; struct acpi_video_device *dev = NULL; struct acpi_video_device *dev_next = NULL; struct acpi_video_device *dev_prev = NULL; unsigned long state; int status = 0; + mutex_lock(&video->device_list_lock); - list_for_each_safe(node, next, &video->video_device_list) { + list_for_each(node, &video->video_device_list) { dev = container_of(node, struct acpi_video_device, entry); status = acpi_video_device_get_state(dev, &state); if (state & 0x2) { - dev_next = - container_of(node->next, struct acpi_video_device, - entry); - dev_prev = - container_of(node->prev, struct acpi_video_device, - entry); + dev_next = container_of(node->next, + struct acpi_video_device, entry); + dev_prev = container_of(node->prev, + struct acpi_video_device, entry); goto out; } } + dev_next = container_of(node->next, struct acpi_video_device, entry); dev_prev = container_of(node->prev, struct acpi_video_device, entry); - out: + + out: + mutex_unlock(&video->device_list_lock); + switch (event) { case ACPI_VIDEO_NOTIFY_CYCLE: case ACPI_VIDEO_NOTIFY_NEXT_OUTPUT: @@ -1691,24 +1697,17 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video, struct acpi_device *device) { int status = 0; - struct list_head *node, *next; - + struct acpi_device *dev; acpi_video_device_enumerate(video); - list_for_each_safe(node, next, &device->children) { - struct acpi_device *dev = - list_entry(node, struct acpi_device, node); - - if (!dev) - continue; + list_for_each_entry(dev, &device->children, node) { status = acpi_video_bus_get_one_device(dev, video); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Cant attach device")); continue; } - } return status; } @@ -1724,9 +1723,6 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device) video = device->video; - down(&video->sem); - list_del(&device->entry); - up(&video->sem); acpi_video_device_remove_fs(device->dev); status = acpi_remove_notify_handler(device->dev->handle, @@ -1734,32 +1730,34 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device) acpi_video_device_notify); backlight_device_unregister(device->backlight); video_output_unregister(device->output_dev); + return 0; } static int acpi_video_bus_put_devices(struct acpi_video_bus *video) { int status; - struct list_head *node, *next; + struct acpi_video_device *dev, *next; + mutex_lock(&video->device_list_lock); - list_for_each_safe(node, next, &video->video_device_list) { - struct acpi_video_device *data = - list_entry(node, struct acpi_video_device, entry); - if (!data) - continue; + list_for_each_entry_safe(dev, next, &video->video_device_list, entry) { - status = acpi_video_bus_put_one_device(data); + status = acpi_video_bus_put_one_device(dev); if (ACPI_FAILURE(status)) printk(KERN_WARNING PREFIX "hhuuhhuu bug in acpi video driver.\n"); - if (data->brightness) - kfree(data->brightness->levels); - kfree(data->brightness); - kfree(data); + if (dev->brightness) { + kfree(dev->brightness->levels); + kfree(dev->brightness); + } + list_del(&dev->entry); + kfree(dev); } + mutex_unlock(&video->device_list_lock); + return 0; } @@ -1782,9 +1780,6 @@ static void acpi_video_bus_notify(acpi_handle handle, u32 event, void *data) struct input_dev *input; int keycode; - - printk("video bus notify\n"); - if (!video) return; @@ -1897,14 +1892,10 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data) static int instance; static int acpi_video_bus_add(struct acpi_device *device) { - int result = 0; - acpi_status status = 0; - struct acpi_video_bus *video = NULL; + acpi_status status; + struct acpi_video_bus *video; struct input_dev *input; - - - if (!device) - return -EINVAL; + int error; video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL); if (!video) @@ -1923,15 +1914,15 @@ static int acpi_video_bus_add(struct acpi_device *device) acpi_driver_data(device) = video; acpi_video_bus_find_cap(video); - result = acpi_video_bus_check(video); - if (result) - goto end; + error = acpi_video_bus_check(video); + if (error) + goto err_free_video; - result = acpi_video_bus_add_fs(device); - if (result) - goto end; + error = acpi_video_bus_add_fs(device); + if (error) + goto err_free_video; - init_MUTEX(&video->sem); + mutex_init(&video->device_list_lock); INIT_LIST_HEAD(&video->video_device_list); acpi_video_bus_get_devices(video, device); @@ -1943,16 +1934,15 @@ static int acpi_video_bus_add(struct acpi_device *device) if (ACPI_FAILURE(status)) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error installing notify handler\n")); - acpi_video_bus_stop_devices(video); - acpi_video_bus_put_devices(video); - kfree(video->attached_array); - acpi_video_bus_remove_fs(device); - result = -ENODEV; - goto end; + error = -ENODEV; + goto err_stop_video; } - video->input = input = input_allocate_device(); + if (!input) { + error = -ENOMEM; + goto err_uninstall_notify; + } snprintf(video->phys, sizeof(video->phys), "%s/video/input0", acpi_device_hid(video->device)); @@ -1961,6 +1951,7 @@ static int acpi_video_bus_add(struct acpi_device *device) input->phys = video->phys; input->id.bustype = BUS_HOST; input->id.product = 0x06; + input->dev.parent = &device->dev; input->evbit[0] = BIT(EV_KEY); set_bit(KEY_SWITCHVIDEOMODE, input->keybit); set_bit(KEY_VIDEO_NEXT, input->keybit); @@ -1971,18 +1962,10 @@ static int acpi_video_bus_add(struct acpi_device *device) set_bit(KEY_BRIGHTNESS_ZERO, input->keybit); set_bit(KEY_DISPLAY_OFF, input->keybit); set_bit(KEY_UNKNOWN, input->keybit); - result = input_register_device(input); - if (result) { - acpi_remove_notify_handler(video->device->handle, - ACPI_DEVICE_NOTIFY, - acpi_video_bus_notify); - acpi_video_bus_stop_devices(video); - acpi_video_bus_put_devices(video); - kfree(video->attached_array); - acpi_video_bus_remove_fs(device); - goto end; - } + error = input_register_device(input); + if (error) + goto err_free_input_dev; printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n", ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device), @@ -1990,11 +1973,23 @@ static int acpi_video_bus_add(struct acpi_device *device) video->flags.rom ? "yes" : "no", video->flags.post ? "yes" : "no"); - end: - if (result) - kfree(video); + return 0; + + err_free_input_dev: + input_free_device(input); + err_uninstall_notify: + acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_video_bus_notify); + err_stop_video: + acpi_video_bus_stop_devices(video); + acpi_video_bus_put_devices(video); + kfree(video->attached_array); + acpi_video_bus_remove_fs(device); + err_free_video: + kfree(video); + acpi_driver_data(device) = NULL; - return result; + return error; } static int acpi_video_bus_remove(struct acpi_device *device, int type) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 328ce8a08426..483269db2c7d 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -119,18 +119,19 @@ enum { PIIX_80C_SEC = (1 << 7) | (1 << 6), /* controller IDs */ - piix_pata_33 = 0, /* PIIX4 at 33Mhz */ - ich_pata_33 = 1, /* ICH up to UDMA 33 only */ - ich_pata_66 = 2, /* ICH up to 66 Mhz */ - ich_pata_100 = 3, /* ICH up to UDMA 100 */ - ich5_sata = 5, - ich6_sata = 6, - ich6_sata_ahci = 7, - ich6m_sata_ahci = 8, - ich8_sata_ahci = 9, - piix_pata_mwdma = 10, /* PIIX3 MWDMA only */ - tolapai_sata_ahci = 11, - ich9_2port_sata = 12, + piix_pata_mwdma = 0, /* PIIX3 MWDMA only */ + piix_pata_33, /* PIIX4 at 33Mhz */ + ich_pata_33, /* ICH up to UDMA 33 only */ + ich_pata_66, /* ICH up to 66 Mhz */ + ich_pata_100, /* ICH up to UDMA 100 */ + ich5_sata, + ich6_sata, + ich6_sata_ahci, + ich6m_sata_ahci, + ich8_sata_ahci, + ich8_2port_sata, + ich8m_apple_sata_ahci, /* locks up on second port enable */ + tolapai_sata_ahci, /* constants for mapping table */ P0 = 0, /* port 0 */ @@ -239,19 +240,21 @@ static const struct pci_device_id piix_pci_tbl[] = { /* SATA Controller 1 IDE (ICH8) */ { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* SATA Controller 2 IDE (ICH8) */ - { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata }, + { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* Mobile SATA Controller IDE (ICH8M) */ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, + /* Mobile SATA Controller IDE (ICH8M), Apple */ + { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata_ahci }, /* SATA Controller IDE (ICH9) */ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* SATA Controller IDE (ICH9) */ - { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata }, + { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (ICH9) */ - { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata }, + { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (ICH9M) */ - { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata }, + { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (ICH9M) */ - { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata }, + { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (ICH9M) */ { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* SATA Controller IDE (Tolapai) */ @@ -427,7 +430,7 @@ static const struct piix_map_db ich6m_map_db = { static const struct piix_map_db ich8_map_db = { .mask = 0x3, - .port_enable = 0x3, + .port_enable = 0xf, .map = { /* PM PS SM SS MAP */ { P0, P2, P1, P3 }, /* 00b (hardwired when in AHCI) */ @@ -437,7 +440,7 @@ static const struct piix_map_db ich8_map_db = { }, }; -static const struct piix_map_db tolapai_map_db = { +static const struct piix_map_db ich8_2port_map_db = { .mask = 0x3, .port_enable = 0x3, .map = { @@ -449,7 +452,19 @@ static const struct piix_map_db tolapai_map_db = { }, }; -static const struct piix_map_db ich9_2port_map_db = { +static const struct piix_map_db ich8m_apple_map_db = { + .mask = 0x3, + .port_enable = 0x1, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, NA, NA }, /* 00b */ + { RV, RV, RV, RV }, + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db tolapai_map_db = { .mask = 0x3, .port_enable = 0x3, .map = { @@ -467,11 +482,21 @@ static const struct piix_map_db *piix_map_db_table[] = { [ich6_sata_ahci] = &ich6_map_db, [ich6m_sata_ahci] = &ich6m_map_db, [ich8_sata_ahci] = &ich8_map_db, + [ich8_2port_sata] = &ich8_2port_map_db, + [ich8m_apple_sata_ahci] = &ich8m_apple_map_db, [tolapai_sata_ahci] = &tolapai_map_db, - [ich9_2port_sata] = &ich9_2port_map_db, }; static struct ata_port_info piix_port_info[] = { + [piix_pata_mwdma] = /* PIIX3 MWDMA only */ + { + .sht = &piix_sht, + .flags = PIIX_PATA_FLAGS, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .port_ops = &piix_pata_ops, + }, + [piix_pata_33] = /* PIIX4 at 33MHz */ { .sht = &piix_sht, @@ -565,13 +590,15 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - [piix_pata_mwdma] = /* PIIX3 MWDMA only */ + [ich8_2port_sata] = { .sht = &piix_sht, - .flags = PIIX_PATA_FLAGS, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ - .port_ops = &piix_pata_ops, + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, }, [tolapai_sata_ahci] = @@ -585,7 +612,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - [ich9_2port_sata] = + [ich8m_apple_sata_ahci] = { .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | @@ -595,6 +622,7 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, + }; static struct pci_bits piix_enable_bits[] = { @@ -974,6 +1002,13 @@ static int piix_broken_suspend(void) }, }, { + .ident = "SATELLITE U205", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U205"), + }, + }, + { .ident = "Portege M500", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), @@ -1086,12 +1121,12 @@ static int piix_disable_ahci(struct pci_dev *pdev) if (!mmio) return -ENOMEM; - tmp = readl(mmio + AHCI_GLOBAL_CTL); + tmp = ioread32(mmio + AHCI_GLOBAL_CTL); if (tmp & AHCI_ENABLE) { tmp &= ~AHCI_ENABLE; - writel(tmp, mmio + AHCI_GLOBAL_CTL); + iowrite32(tmp, mmio + AHCI_GLOBAL_CTL); - tmp = readl(mmio + AHCI_GLOBAL_CTL); + tmp = ioread32(mmio + AHCI_GLOBAL_CTL); if (tmp & AHCI_ENABLE) rc = -EIO; } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 81898036dbca..33f06277b3be 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -30,6 +30,14 @@ * Hardware documentation available from http://www.t13.org/ and * http://www.sata-io.org/ * + * Standards documents from: + * http://www.t13.org (ATA standards, PCI DMA IDE spec) + * http://www.t10.org (SCSI MMC - for ATAPI MMC) + * http://www.sata-io.org (SATA) + * http://www.compactflash.org (CF) + * http://www.qic.org (QIC157 - Tape and DSC) + * http://www.ce-ata.org (CE-ATA: not supported) + * */ #include <linux/kernel.h> @@ -2307,8 +2315,10 @@ int ata_dev_configure(struct ata_device *dev) } if ((dev->class == ATA_DEV_ATAPI) && - (atapi_command_packet_set(id) == TYPE_TAPE)) + (atapi_command_packet_set(id) == TYPE_TAPE)) { dev->max_sectors = ATA_MAX_SECTORS_TAPE; + dev->horkage |= ATA_HORKAGE_STUCK_ERR; + } if (dev->horkage & ATA_HORKAGE_MAX_SEC_128) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, @@ -2581,81 +2591,6 @@ void sata_print_link_status(struct ata_link *link) } /** - * __sata_phy_reset - Wake/reset a low-level SATA PHY - * @ap: SATA port associated with target SATA PHY. - * - * This function issues commands to standard SATA Sxxx - * PHY registers, to wake up the phy (and device), and - * clear any reset condition. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void __sata_phy_reset(struct ata_port *ap) -{ - struct ata_link *link = &ap->link; - unsigned long timeout = jiffies + (HZ * 5); - u32 sstatus; - - if (ap->flags & ATA_FLAG_SATA_RESET) { - /* issue phy wake/reset */ - sata_scr_write_flush(link, SCR_CONTROL, 0x301); - /* Couldn't find anything in SATA I/II specs, but - * AHCI-1.1 10.4.2 says at least 1 ms. */ - mdelay(1); - } - /* phy wake/clear reset */ - sata_scr_write_flush(link, SCR_CONTROL, 0x300); - - /* wait for phy to become ready, if necessary */ - do { - msleep(200); - sata_scr_read(link, SCR_STATUS, &sstatus); - if ((sstatus & 0xf) != 1) - break; - } while (time_before(jiffies, timeout)); - - /* print link status */ - sata_print_link_status(link); - - /* TODO: phy layer with polling, timeouts, etc. */ - if (!ata_link_offline(link)) - ata_port_probe(ap); - else - ata_port_disable(ap); - - if (ap->flags & ATA_FLAG_DISABLED) - return; - - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - ata_port_disable(ap); - return; - } - - ap->cbl = ATA_CBL_SATA; -} - -/** - * sata_phy_reset - Reset SATA bus. - * @ap: SATA port associated with target SATA PHY. - * - * This function resets the SATA bus, and then probes - * the bus for devices. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void sata_phy_reset(struct ata_port *ap) -{ - __sata_phy_reset(ap); - if (ap->flags & ATA_FLAG_DISABLED) - return; - ata_bus_reset(ap); -} - -/** * ata_dev_pair - return other device on cable * @adev: device * @@ -5490,11 +5425,19 @@ fsm_start: * let the EH abort the command or reset the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { - ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device " - "error, dev_stat 0x%X\n", status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; + /* Some ATAPI tape drives forget to clear the ERR bit + * when doing the next command (mostly request sense). + * We ignore ERR here to workaround and proceed sending + * the CDB. + */ + if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { + ata_port_printk(ap, KERN_WARNING, + "DRQ=1 with device error, " + "dev_stat 0x%X\n", status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } } /* Send the CDB (atapi) or the first data block (ata pio out). @@ -7653,8 +7596,6 @@ EXPORT_SYMBOL_GPL(ata_dev_disable); EXPORT_SYMBOL_GPL(sata_set_spd); EXPORT_SYMBOL_GPL(sata_link_debounce); EXPORT_SYMBOL_GPL(sata_link_resume); -EXPORT_SYMBOL_GPL(sata_phy_reset); -EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(ata_std_softreset); @@ -7725,7 +7666,6 @@ EXPORT_SYMBOL_GPL(ata_port_desc); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(ata_port_pbar_desc); #endif /* CONFIG_PCI */ -EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_port_schedule_eh); EXPORT_SYMBOL_GPL(ata_link_abort); EXPORT_SYMBOL_GPL(ata_port_abort); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index ed8813b222a0..0dac69db1fdf 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -559,101 +559,6 @@ void ata_port_wait_eh(struct ata_port *ap) } } -/** - * ata_qc_timeout - Handle timeout of queued command - * @qc: Command that timed out - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * TODO: kill this function once old EH is gone. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ -static void ata_qc_timeout(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 host_stat = 0, drv_stat; - unsigned long flags; - - DPRINTK("ENTER\n"); - - ap->hsm_task_state = HSM_ST_IDLE; - - spin_lock_irqsave(ap->lock, flags); - - switch (qc->tf.protocol) { - - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - host_stat = ap->ops->bmdma_status(ap); - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - /* fall through */ - - default: - ata_altstatus(ap); - drv_stat = ata_chk_status(ap); - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, " - "stat 0x%x host_stat 0x%x\n", - qc->tf.command, drv_stat, host_stat); - - /* complete taskfile transaction */ - qc->err_mask |= AC_ERR_TIMEOUT; - break; - } - - spin_unlock_irqrestore(ap->lock, flags); - - ata_eh_qc_complete(qc); - - DPRINTK("EXIT\n"); -} - -/** - * ata_eng_timeout - Handle timeout of queued command - * @ap: Port on which timed-out command is active - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * TODO: kill this function once old EH is gone. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ -void ata_eng_timeout(struct ata_port *ap) -{ - DPRINTK("ENTER\n"); - - ata_qc_timeout(ata_qc_from_tag(ap, ap->link.active_tag)); - - DPRINTK("EXIT\n"); -} - static int ata_eh_nr_in_flight(struct ata_port *ap) { unsigned int tag; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 94144ed50a6b..a883bb03d4c7 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2485,11 +2485,40 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) if (!using_pio && ata_check_atapi_dma(qc)) using_pio = 1; - /* Some controller variants snoop this value for Packet transfers - to do state machine and FIFO management. Thus we want to set it - properly, and for DMA where it is effectively meaningless */ + /* Some controller variants snoop this value for Packet + * transfers to do state machine and FIFO management. Thus we + * want to set it properly, and for DMA where it is + * effectively meaningless. + */ nbytes = min(qc->nbytes, (unsigned int)63 * 1024); + /* Most ATAPI devices which honor transfer chunk size don't + * behave according to the spec when odd chunk size which + * matches the transfer length is specified. If the number of + * bytes to transfer is 2n+1. According to the spec, what + * should happen is to indicate that 2n+1 is going to be + * transferred and transfer 2n+2 bytes where the last byte is + * padding. + * + * In practice, this doesn't happen. ATAPI devices first + * indicate and transfer 2n bytes and then indicate and + * transfer 2 bytes where the last byte is padding. + * + * This inconsistency confuses several controllers which + * perform PIO using DMA such as Intel AHCIs and sil3124/32. + * These controllers use actual number of transferred bytes to + * update DMA poitner and transfer of 4n+2 bytes make those + * controller push DMA pointer by 4n+4 bytes because SATA data + * FISes are aligned to 4 bytes. This causes data corruption + * and buffer overrun. + * + * Always setting nbytes to even number solves this problem + * because then ATAPI devices don't have to split data at 2n + * boundaries. + */ + if (nbytes & 0x1) + nbytes++; + qc->tf.lbam = (nbytes & 0xFF); qc->tf.lbah = (nbytes >> 8); @@ -2869,7 +2898,8 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, xlat_func = NULL; if (likely((scsi_op != ATA_16) || !atapi_passthru16)) { /* relay SCSI command to ATAPI device */ - if (unlikely(scmd->cmd_len > dev->cdb_len)) + int len = COMMAND_SIZE(scsi_op); + if (unlikely(len > scmd->cmd_len || len > dev->cdb_len)) goto bad_cdb_len; xlat_func = atapi_xlat; diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 364534e7aff4..8caf9afc8b90 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -63,6 +63,9 @@ static int ali_cable_override(struct pci_dev *pdev) /* Fujitsu P2000 */ if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF) return 1; + /* Mitac 8317 (Winbook-A) and relatives */ + if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317) + return 1; /* Systems by DMI */ if (dmi_check_system(cable_dmi_table)) return 1; @@ -282,6 +285,21 @@ static void ali_lock_sectors(struct ata_device *adev) adev->max_sectors = 255; } +/** + * ali_check_atapi_dma - DMA check for most ALi controllers + * @adev: Device + * + * Called to decide whether commands should be sent by DMA or PIO + */ + +static int ali_check_atapi_dma(struct ata_queued_cmd *qc) +{ + /* If its not a media command, its not worth it */ + if (qc->nbytes < 2048) + return -EOPNOTSUPP; + return 0; +} + static struct scsi_host_template ali_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -378,6 +396,7 @@ static struct ata_port_operations ali_c2_port_ops = { .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, .tf_read = ata_tf_read, + .check_atapi_dma = ali_check_atapi_dma, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, @@ -415,6 +434,7 @@ static struct ata_port_operations ali_c5_port_ops = { .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, .tf_read = ata_tf_read, + .check_atapi_dma = ali_check_atapi_dma, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index b5e38426b815..81db405a5445 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1145,13 +1145,13 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap) unsigned short int_status = ATAPI_GET_INT_STATUS(base); if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON|ULTRA_XFER_ON)) { - host_stat = ATA_DMA_ACTIVE; + host_stat |= ATA_DMA_ACTIVE; } if (int_status & (MULTI_DONE_INT|UDMAIN_DONE_INT|UDMAOUT_DONE_INT)) { - host_stat = ATA_DMA_INTR; + host_stat |= ATA_DMA_INTR; } if (int_status & (MULTI_TERM_INT|UDMAIN_TERM_INT|UDMAOUT_TERM_INT)) { - host_stat = ATA_DMA_ERR; + host_stat |= ATA_DMA_ERR; } return host_stat; diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 3816b8605e0d..46dc70e0dee7 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -329,7 +329,7 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline) /* Restore state */ pci_write_config_byte(pdev, 0x5B, scr2); - if (ata66 & (1 << ap->port_no)) + if (ata66 & (2 >> ap->port_no)) ap->cbl = ATA_CBL_PATA40; else ap->cbl = ATA_CBL_PATA80; diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 88ab0e1d353f..4320e7986321 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -75,13 +75,16 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev struct ata_host *host; struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; + int irq = 0; + irq_handler_t handler = NULL; if (pnp_port_valid(idev, 0) == 0) return -ENODEV; - /* FIXME: Should selected polled PIO here not fail */ - if (pnp_irq_valid(idev, 0) == 0) - return -ENODEV; + if (pnp_irq_valid(idev, 0)) { + irq = pnp_irq(idev, 0); + handler = ata_interrupt; + } /* allocate host */ host = ata_host_alloc(&idev->dev, 1); @@ -115,7 +118,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev (unsigned long long)pnp_port_start(idev, 1)); /* activate */ - return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0, + return ata_host_activate(host, irq, handler, 0, &isapnp_sht); } diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 225a7223a726..5b8174d94067 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -80,11 +80,10 @@ static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline) * actually do our cable checking etc. Thankfully we don't need * to do the plumbing for other cases. */ - switch (port_map[port]) - { + switch (port_map[port]) { case PORT_PATA0: - if (control & (1 << 5)) - return 0; + if ((control & (1 << 5)) == 0) + return -ENOENT; if (control & (1 << 3)) /* 40/80 pin primary */ ap->cbl = ATA_CBL_PATA40; else @@ -93,7 +92,7 @@ static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline) case PORT_PATA1: /* Bit 21 is set if the port is enabled */ if ((control5 & (1 << 21)) == 0) - return 0; + return -ENOENT; if (control5 & (1 << 19)) /* 40/80 pin secondary */ ap->cbl = ATA_CBL_PATA40; else diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 5c1e9cb59ecb..503245a1eafa 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -33,7 +33,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_sil680" -#define DRV_VERSION "0.4.7" +#define DRV_VERSION "0.4.8" #define SIL680_MMIO_BAR 5 @@ -94,34 +94,6 @@ static int sil680_cable_detect(struct ata_port *ap) { } /** - * sil680_bus_reset - reset the SIL680 bus - * @link: ATA link to reset - * @deadline: deadline jiffies for the operation - * - * Perform the SIL680 housekeeping when doing an ATA bus reset - */ - -static int sil680_bus_reset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - unsigned long addr = sil680_selreg(ap, 0); - u8 reset; - - pci_read_config_byte(pdev, addr, &reset); - pci_write_config_byte(pdev, addr, reset | 0x03); - udelay(25); - pci_write_config_byte(pdev, addr, reset); - return ata_std_softreset(link, classes, deadline); -} - -static void sil680_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, ata_std_prereset, sil680_bus_reset, NULL, ata_std_postreset); -} - -/** * sil680_set_piomode - set initial PIO mode data * @ap: ATA interface * @adev: ATA device @@ -249,7 +221,7 @@ static struct ata_port_operations sil680_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = sil680_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = sil680_cable_detect, diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 3b5be77e861c..87546d9f1ca0 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -55,6 +55,7 @@ static const struct sis_laptop sis_laptop[] = { /* devid, subvendor, subdev */ { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ + { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ /* end marker */ { 0, } }; diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 187dcb02c681..96fd5260446d 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -63,6 +63,21 @@ enum { SIL24_HOST_BAR = 0, SIL24_PORT_BAR = 2, + /* sil24 fetches in chunks of 64bytes. The first block + * contains the PRB and two SGEs. From the second block, it's + * consisted of four SGEs and called SGT. Calculate the + * number of SGTs that fit into one page. + */ + SIL24_PRB_SZ = sizeof(struct sil24_prb) + + 2 * sizeof(struct sil24_sge), + SIL24_MAX_SGT = (PAGE_SIZE - SIL24_PRB_SZ) + / (4 * sizeof(struct sil24_sge)), + + /* This will give us one unused SGEs for ATA. This extra SGE + * will be used to store CDB for ATAPI devices. + */ + SIL24_MAX_SGE = 4 * SIL24_MAX_SGT + 1, + /* * Global controller registers (128 bytes @ BAR0) */ @@ -247,13 +262,13 @@ enum { struct sil24_ata_block { struct sil24_prb prb; - struct sil24_sge sge[LIBATA_MAX_PRD]; + struct sil24_sge sge[SIL24_MAX_SGE]; }; struct sil24_atapi_block { struct sil24_prb prb; u8 cdb[16]; - struct sil24_sge sge[LIBATA_MAX_PRD - 1]; + struct sil24_sge sge[SIL24_MAX_SGE]; }; union sil24_cmd_block { @@ -378,7 +393,7 @@ static struct scsi_host_template sil24_sht = { .change_queue_depth = ata_scsi_change_queue_depth, .can_queue = SIL24_MAX_CMDS, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, + .sg_tablesize = SIL24_MAX_SGE, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -1284,6 +1299,7 @@ static void sil24_init_controller(struct ata_host *host) static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { + extern int __MARKER__sil24_cmd_block_is_sized_wrongly; static int printed_version; struct ata_port_info pi = sil24_port_info[ent->driver_data]; const struct ata_port_info *ppi[] = { &pi, NULL }; @@ -1292,6 +1308,10 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) int i, rc; u32 tmp; + /* cause link error if sil24_cmd_block is sized wrongly */ + if (sizeof(union sil24_cmd_block) != PAGE_SIZE) + __MARKER__sil24_cmd_block_is_sized_wrongly = 1; + if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); diff --git a/drivers/atm/he.c b/drivers/atm/he.c index d33aba6864c2..3b64a99772ea 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -394,6 +394,11 @@ he_init_one(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent) he_dev->atm_dev->dev_data = he_dev; atm_dev->dev_data = he_dev; he_dev->number = atm_dev->number; +#ifdef USE_TASKLET + tasklet_init(&he_dev->tasklet, he_tasklet, (unsigned long) he_dev); +#endif + spin_lock_init(&he_dev->global_lock); + if (he_start(atm_dev)) { he_stop(he_dev); err = -ENODEV; @@ -1173,11 +1178,6 @@ he_start(struct atm_dev *dev) if ((err = he_init_irq(he_dev)) != 0) return err; -#ifdef USE_TASKLET - tasklet_init(&he_dev->tasklet, he_tasklet, (unsigned long) he_dev); -#endif - spin_lock_init(&he_dev->global_lock); - /* 4.11 enable pci bus controller state machines */ host_cntl |= (OUTFF_ENB | CMDFF_ENB | QUICK_RD_RETRY | QUICK_WR_RETRY | PERR_INT_ENB); diff --git a/drivers/base/core.c b/drivers/base/core.c index 3f4d6aa13990..2683eac30c68 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -770,9 +770,10 @@ int device_add(struct device *dev) error = device_add_attrs(dev); if (error) goto AttrsError; - error = device_pm_add(dev); + error = dpm_sysfs_add(dev); if (error) goto PMError; + device_pm_add(dev); error = bus_add_device(dev); if (error) goto BusError; @@ -797,6 +798,7 @@ int device_add(struct device *dev) return error; BusError: device_pm_remove(dev); + dpm_sysfs_remove(dev); PMError: if (dev->bus) blocking_notifier_call_chain(&dev->bus->bus_notifier, diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile index a803733c839e..44504e6618fb 100644 --- a/drivers/base/power/Makefile +++ b/drivers/base/power/Makefile @@ -1,5 +1,6 @@ obj-y := shutdown.o -obj-$(CONFIG_PM_SLEEP) += main.o sysfs.o +obj-$(CONFIG_PM) += sysfs.o +obj-$(CONFIG_PM_SLEEP) += main.o obj-$(CONFIG_PM_TRACE) += trace.o ifeq ($(CONFIG_DEBUG_DRIVER),y) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 0ab4ab21f564..691ffb64cc37 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -38,20 +38,14 @@ static DEFINE_MUTEX(dpm_list_mtx); int (*platform_enable_wakeup)(struct device *dev, int is_on); -int device_pm_add(struct device *dev) +void device_pm_add(struct device *dev) { - int error; - pr_debug("PM: Adding info for %s:%s\n", dev->bus ? dev->bus->name : "No Bus", kobject_name(&dev->kobj)); mutex_lock(&dpm_list_mtx); list_add_tail(&dev->power.entry, &dpm_active); - error = dpm_sysfs_add(dev); - if (error) - list_del(&dev->power.entry); mutex_unlock(&dpm_list_mtx); - return error; } void device_pm_remove(struct device *dev) diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 5c4efd493fa5..379da4e958e0 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -13,14 +13,29 @@ extern void device_shutdown(void); extern struct list_head dpm_active; /* The active device list */ -static inline struct device * to_device(struct list_head * entry) +static inline struct device *to_device(struct list_head *entry) { return container_of(entry, struct device, power.entry); } -extern int device_pm_add(struct device *); +extern void device_pm_add(struct device *); extern void device_pm_remove(struct device *); +#else /* CONFIG_PM_SLEEP */ + + +static inline void device_pm_add(struct device *dev) +{ +} + +static inline void device_pm_remove(struct device *dev) +{ +} + +#endif + +#ifdef CONFIG_PM + /* * sysfs.c */ @@ -28,16 +43,15 @@ extern void device_pm_remove(struct device *); extern int dpm_sysfs_add(struct device *); extern void dpm_sysfs_remove(struct device *); -#else /* CONFIG_PM_SLEEP */ - +#else /* CONFIG_PM */ -static inline int device_pm_add(struct device * dev) +static inline int dpm_sysfs_add(struct device *dev) { return 0; } -static inline void device_pm_remove(struct device * dev) -{ +static inline void dpm_sysfs_remove(struct device *dev) +{ } #endif diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 3cf7129d83e6..924ddd8bccd2 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -223,7 +223,7 @@ static int virtblk_probe(struct virtio_device *vdev) err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_CAPACITY, &cap); if (err) { dev_err(&vdev->dev, "Bad/missing capacity in config\n"); - goto out_put_disk; + goto out_cleanup_queue; } /* If capacity is too big, truncate with warning. */ @@ -239,7 +239,7 @@ static int virtblk_probe(struct virtio_device *vdev) blk_queue_max_segment_size(vblk->disk->queue, v); else if (err != -ENOENT) { dev_err(&vdev->dev, "Bad SIZE_MAX in config\n"); - goto out_put_disk; + goto out_cleanup_queue; } err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_SEG_MAX, &v); @@ -247,12 +247,14 @@ static int virtblk_probe(struct virtio_device *vdev) blk_queue_max_hw_segments(vblk->disk->queue, v); else if (err != -ENOENT) { dev_err(&vdev->dev, "Bad SEG_MAX in config\n"); - goto out_put_disk; + goto out_cleanup_queue; } add_disk(vblk->disk); return 0; +out_cleanup_queue: + blk_cleanup_queue(vblk->disk->queue); out_put_disk: put_disk(vblk->disk); out_unregister_blkdev: @@ -277,6 +279,8 @@ static void virtblk_remove(struct virtio_device *vdev) put_disk(vblk->disk); unregister_blkdev(major, "virtblk"); mempool_destroy(vblk->pool); + /* There should be nothing in the queue now, so no need to shutdown */ + vdev->config->del_vq(vblk->vq); kfree(vblk); } diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index bf18d757b876..a509b8d79781 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -457,7 +457,7 @@ config LEGACY_PTYS config LEGACY_PTY_COUNT int "Maximum number of legacy PTY in use" depends on LEGACY_PTYS - range 1 256 + range 0 256 default "256" ---help--- The maximum number of legacy PTYs that can be used at any one time. diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 877e53dcb996..921c6d2bc8fc 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -1163,7 +1163,7 @@ static struct acpi_driver sonypi_acpi_driver = { }; #endif -static int __devinit sonypi_create_input_devices(void) +static int __devinit sonypi_create_input_devices(struct platform_device *pdev) { struct input_dev *jog_dev; struct input_dev *key_dev; @@ -1177,6 +1177,7 @@ static int __devinit sonypi_create_input_devices(void) jog_dev->name = "Sony Vaio Jogdial"; jog_dev->id.bustype = BUS_ISA; jog_dev->id.vendor = PCI_VENDOR_ID_SONY; + jog_dev->dev.parent = &pdev->dev; jog_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); jog_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_MIDDLE); @@ -1191,6 +1192,7 @@ static int __devinit sonypi_create_input_devices(void) key_dev->name = "Sony Vaio Keys"; key_dev->id.bustype = BUS_ISA; key_dev->id.vendor = PCI_VENDOR_ID_SONY; + key_dev->dev.parent = &pdev->dev; /* Initialize the Input Drivers: special keys */ key_dev->evbit[0] = BIT_MASK(EV_KEY); @@ -1385,7 +1387,7 @@ static int __devinit sonypi_probe(struct platform_device *dev) if (useinput) { - error = sonypi_create_input_devices(); + error = sonypi_create_input_devices(dev); if (error) { printk(KERN_ERR "sonypi: failed to create input devices\n"); @@ -1432,7 +1434,7 @@ static int __devexit sonypi_remove(struct platform_device *dev) { sonypi_disable(); - synchronize_sched(); /* Allow sonypi interrupt to complete. */ + synchronize_irq(sonypi_device.irq); flush_scheduled_work(); if (useinput) { diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index fd771a4d6d18..81503d94fecc 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -450,6 +450,11 @@ static int tpm_tis_init(struct device *dev, resource_size_t start, goto out_err; } + if (request_locality(chip, 0) != 0) { + rc = -ENODEV; + goto out_err; + } + vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0)); /* Default timeouts */ @@ -487,11 +492,6 @@ static int tpm_tis_init(struct device *dev, resource_size_t start, if (intfcaps & TPM_INTF_DATA_AVAIL_INT) dev_dbg(dev, "\tData Avail Int Support\n"); - if (request_locality(chip, 0) != 0) { - rc = -ENODEV; - goto out_err; - } - /* INTERRUPT Setup */ init_waitqueue_head(&chip->vendor.read_queue); init_waitqueue_head(&chip->vendor.int_queue); diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 6a7d25fc2470..c46b7c219ee9 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -3,11 +3,13 @@ # menuconfig DMADEVICES - bool "DMA Offload Engine support" + bool "DMA Engine support" depends on (PCI && X86) || ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX help - Intel(R) offload engines enable offloading memory copies in the - network stack and RAID operations in the MD driver. + DMA engines can do asynchronous data transfers without + involving the host CPU. Currently, this framework can be + used to offload memory copies in the network stack and + RAID operations in the MD driver. if DMADEVICES diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e445fe6e4ba9..45b22282f149 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -313,7 +313,6 @@ comment "IDE chipset support/bugfixes" config IDE_GENERIC tristate "generic/default IDE chipset support" - default H8300 help If unsure, say N. @@ -484,6 +483,7 @@ config WDC_ALI15X3 config BLK_DEV_AMD74XX tristate "AMD and nVidia IDE support" + depends on !ARM select BLK_DEV_IDEDMA_PCI help This driver adds explicit support for AMD-7xx and AMD-8111 chips @@ -883,6 +883,49 @@ config BLK_DEV_IDE_BAST Say Y here if you want to support the onboard IDE channels on the Simtec BAST or the Thorcom VR1000 +config ETRAX_IDE + bool "ETRAX IDE support" + depends on CRIS && BROKEN + select BLK_DEV_IDEDMA + select IDE_GENERIC + help + Enables the ETRAX IDE driver. + + You can't use parallel ports or SCSI ports at the same time. + +config ETRAX_IDE_DELAY + int "Delay for drives to regain consciousness" + depends on ETRAX_IDE && ETRAX_ARCH_V10 + default 15 + help + Number of seconds to wait for IDE drives to spin up after an IDE + reset. + +choice + prompt "IDE reset pin" + depends on ETRAX_IDE && ETRAX_ARCH_V10 + default ETRAX_IDE_PB7_RESET + +config ETRAX_IDE_PB7_RESET + bool "Port_PB_Bit_7" + help + IDE reset on pin 7 on port B + +config ETRAX_IDE_G27_RESET + bool "Port_G_Bit_27" + help + IDE reset on pin 27 on port G + +endchoice + +config IDE_H8300 + bool "H8300 IDE support" + depends on H8300 + select IDE_GENERIC + default y + help + Enables the H8300 IDE driver. + config BLK_DEV_GAYLE bool "Amiga Gayle IDE interface support" depends on AMIGA @@ -963,7 +1006,7 @@ config BLK_DEV_Q40IDE config BLK_DEV_MPC8xx_IDE bool "MPC8xx IDE support" - depends on 8xx && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE + depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE select IDE_GENERIC help This option provides support for IDE on Motorola MPC8xx Systems. diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 75dc6969e0a7..b181fc672057 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -39,7 +39,7 @@ ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o # built-in only drivers from h8300/ -ide-core-$(CONFIG_H8300) += h8300/ide-h8300.o +ide-core-$(CONFIG_IDE_H8300) += h8300/ide-h8300.o obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o obj-$(CONFIG_IDE_GENERIC) += ide-generic.o diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 7f5bc2ee6c7e..476e0d65ed43 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -773,15 +773,16 @@ init_e100_ide (void) /* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */ ide_offsets[IDE_CONTROL_OFFSET] = cris_ide_reg_addr(6, 1, 0); - /* first fill in some stuff in the ide_hwifs fields */ + for (h = 0; h < 4; h++) { + ide_hwif_t *hwif = NULL; - for(h = 0; h < MAX_HWIFS; h++) { - ide_hwif_t *hwif = &ide_hwifs[h]; ide_setup_ports(&hw, cris_ide_base_address(h), ide_offsets, 0, 0, cris_ide_ack_intr, ide_default_irq(0)); ide_register_hw(&hw, NULL, 1, &hwif); + if (hwif == NULL) + continue; hwif->mmio = 1; hwif->chipset = ide_etrax100; hwif->set_pio_mode = &cris_set_pio_mode; diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index e3add70b9cd8..0d795a1678c7 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -130,6 +130,7 @@ static const struct drive_list_entry drive_blacklist [] = { { "_NEC DV5800A", NULL }, { "SAMSUNG CD-ROM SN-124", "N001" }, { "Seagate STT20000A", NULL }, + { "CD-ROM CDR_U200", "1.09" }, { NULL , NULL } }; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index e17a9ee120ea..5c3256180ae5 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -303,9 +303,6 @@ void default_hwif_transport(ide_hwif_t *hwif) hwif->atapi_output_bytes = atapi_output_bytes; } -/* - * Beginning of Taskfile OPCODE Library and feature sets. - */ void ide_fix_driveid (struct hd_driveid *id) { #ifndef __LITTLE_ENDIAN @@ -592,6 +589,9 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list); static const struct drive_list_entry ivb_list[] = { { "QUANTUM FIREBALLlct10 05" , "A03.0900" }, { "TSSTcorp CDDVDW SH-S202J" , "SB00" }, + { "TSSTcorp CDDVDW SH-S202J" , "SB01" }, + { "TSSTcorp CDDVDW SH-S202N" , "SB00" }, + { "TSSTcorp CDDVDW SH-S202N" , "SB01" }, { NULL , NULL } }; @@ -756,7 +756,7 @@ int ide_driveid_update(ide_drive_t *drive) int ide_config_drive_speed(ide_drive_t *drive, u8 speed) { ide_hwif_t *hwif = drive->hwif; - int error; + int error = 0; u8 stat; // while (HWGROUP(drive)->busy) @@ -767,6 +767,10 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) hwif->dma_host_off(drive); #endif + /* Skip setting PIO flow-control modes on pre-EIDE drives */ + if ((speed & 0xf8) == XFER_PIO_0 && !(drive->id->capability & 0x08)) + goto skip; + /* * Don't use ide_wait_cmd here - it will * attempt to set_geometry and recalibrate, @@ -814,6 +818,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) drive->id->dma_mword &= ~0x0F00; drive->id->dma_1word &= ~0x0F00; + skip: #ifdef CONFIG_BLK_DEV_IDEDMA if (speed >= XFER_SW_DMA_0) hwif->dma_host_on(drive); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 56fb0b843429..ee848c705995 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -644,7 +644,7 @@ static void hwif_register (ide_hwif_t *hwif) static int wait_hwif_ready(ide_hwif_t *hwif) { - int rc; + int unit, rc; printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name); @@ -661,20 +661,26 @@ static int wait_hwif_ready(ide_hwif_t *hwif) return rc; /* Now make sure both master & slave are ready */ - SELECT_DRIVE(&hwif->drives[0]); - hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); - mdelay(2); - rc = ide_wait_not_busy(hwif, 35000); - if (rc) - return rc; - SELECT_DRIVE(&hwif->drives[1]); - hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); - mdelay(2); - rc = ide_wait_not_busy(hwif, 35000); + for (unit = 0; unit < MAX_DRIVES; unit++) { + ide_drive_t *drive = &hwif->drives[unit]; + /* Ignore disks that we will not probe for later. */ + if (!drive->noprobe || drive->present) { + SELECT_DRIVE(drive); + hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); + mdelay(2); + rc = ide_wait_not_busy(hwif, 35000); + if (rc) + goto out; + } else + printk(KERN_DEBUG "%s: ide_wait_not_busy() skipped\n", + drive->name); + } +out: /* Exit function with master reselected (let's be sane) */ - SELECT_DRIVE(&hwif->drives[0]); - + if (unit) + SELECT_DRIVE(&hwif->drives[0]); + return rc; } diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 10311ecc674a..38c3a6d63f30 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -53,12 +53,13 @@ /* port addresses for auto-detection */ #define ALI_NUM_PORTS 4 -static int ports[ALI_NUM_PORTS] __initdata = {0x074, 0x0f4, 0x034, 0x0e4}; +static const int ports[ALI_NUM_PORTS] __initdata = + { 0x074, 0x0f4, 0x034, 0x0e4 }; /* register initialization data */ typedef struct { u8 reg, data; } RegInitializer; -static RegInitializer initData[] __initdata = { +static const RegInitializer initData[] __initdata = { {0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00}, {0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00}, @@ -177,7 +178,7 @@ static int __init findPort (void) * Initialize controller registers with default values. */ static int __init initRegisters (void) { - RegInitializer *p; + const RegInitializer *p; u8 t; unsigned long flags; diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index e87cd2f16430..5c6aa77c2370 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -81,7 +81,7 @@ int macide_ack_intr(ide_hwif_t* hwif) * Probe for a Macintosh IDE interface */ -void macide_init(void) +void __init macide_init(void) { hw_regs_t hw; ide_hwif_t *hwif; diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index a73db1bd482d..6ea46a6723e2 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -111,7 +111,7 @@ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={ * Probe for Q40 IDE interfaces */ -void q40ide_init(void) +void __init q40ide_init(void) { int i; ide_hwif_t *hwif; diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 19ec421f7b9f..44268504ae43 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -260,6 +260,11 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi { struct ide_port_info d; u8 idx = id->driver_data; + int err; + + err = pci_enable_device(dev); + if (err) + return err; d = aec62xx_chipsets[idx]; @@ -272,7 +277,11 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi } } - return ide_setup_pci_device(dev, &d); + err = ide_setup_pci_device(dev, &d); + if (err) + pci_disable_device(dev); + + return err; } static const struct pci_device_id aec62xx_pci_tbl[] = { diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index a607dd31a64c..ce293936af4b 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -603,6 +603,11 @@ static int ali_cable_override(struct pci_dev *pdev) pdev->subsystem_device == 0x10AF) return 1; + /* Mitac 8317 (Winbook-A) and relatives */ + if (pdev->subsystem_vendor == 0x1071 && + pdev->subsystem_device == 0x8317) + return 1; + /* Systems by DMI */ if (dmi_check_system(cable_dmi_table)) return 1; diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 63625a0be712..27781d294cea 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -306,6 +306,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */ { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ + { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */ /* end marker */ { 0, } diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 6d99441c605b..5709c252543b 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/siimage.c Version 1.18 Oct 18 2007 + * linux/drivers/ide/pci/siimage.c Version 1.19 Nov 16 2007 * * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2003 Red Hat <alan@redhat.com> @@ -460,48 +460,6 @@ static void sil_sata_pre_reset(ide_drive_t *drive) } /** - * siimage_reset - reset a device on an siimage controller - * @drive: drive to reset - * - * Perform a controller level reset fo the device. For - * SATA we must also check the PHY. - */ - -static void siimage_reset (ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 reset = 0; - unsigned long addr = siimage_selreg(hwif, 0); - - if (hwif->mmio) { - reset = hwif->INB(addr); - hwif->OUTB((reset|0x03), addr); - /* FIXME:posting */ - udelay(25); - hwif->OUTB(reset, addr); - (void) hwif->INB(addr); - } else { - pci_read_config_byte(hwif->pci_dev, addr, &reset); - pci_write_config_byte(hwif->pci_dev, addr, reset|0x03); - udelay(25); - pci_write_config_byte(hwif->pci_dev, addr, reset); - pci_read_config_byte(hwif->pci_dev, addr, &reset); - } - - if (SATA_STATUS_REG) { - /* SATA_STATUS_REG is valid only when in MMIO mode */ - u32 sata_stat = readl((void __iomem *)SATA_STATUS_REG); - printk(KERN_WARNING "%s: reset phy, status=0x%08x, %s\n", - hwif->name, sata_stat, __FUNCTION__); - if (!(sata_stat)) { - printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", - hwif->name, sata_stat); - drive->failures++; - } - } -} - -/** * proc_reports_siimage - add siimage controller to proc * @dev: PCI device * @clocking: SCSC value @@ -857,7 +815,6 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) { u8 sata = is_sata(hwif); - hwif->resetproc = &siimage_reset; hwif->set_pio_mode = &sil_set_pio_mode; hwif->set_dma_mode = &sil_set_dma_mode; diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index f6e2ab3dd166..d90b42917775 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -526,6 +526,7 @@ static const struct sis_laptop sis_laptop[] = { /* devid, subvendor, subdev */ { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ { 0x5513, 0x1734, 0x105f }, /* FSC Amilo A1630 */ + { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ /* end marker */ { 0, } }; diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index 5011ba22e36c..0895e753a35d 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -240,9 +240,6 @@ static int trm290_ide_dma_test_irq (ide_drive_t *drive) return (status == 0x00ff); } -/* - * Invoked from ide-dma.c at boot time. - */ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) { unsigned int cfgbase = 0; diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 5afdfef7264c..7f7a59885777 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1513,7 +1513,7 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) { if (pmif->broken_dma_warn == 0) { - printk(KERN_WARNING "%s: DMA on non aligned address," + printk(KERN_WARNING "%s: DMA on non aligned address, " "switching to PIO on Ohare chipset\n", drive->name); pmif->broken_dma_warn = 1; } diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 2e3e6547cb78..dd126681fed0 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -1203,7 +1203,7 @@ static int internal_modify_qp(struct ib_qp *ibqp, mqpcb->service_level = attr->ah_attr.sl; update_mask |= EHCA_BMASK_SET(MQPCB_MASK_SERVICE_LEVEL, 1); - if (ehca_calc_ipd(shca, my_qp->init_attr.port_num, + if (ehca_calc_ipd(shca, mqpcb->prim_phys_port, attr->ah_attr.static_rate, &mqpcb->max_static_rate)) { ret = -EINVAL; @@ -1302,7 +1302,7 @@ static int internal_modify_qp(struct ib_qp *ibqp, mqpcb->source_path_bits_al = attr->alt_ah_attr.src_path_bits; mqpcb->service_level_al = attr->alt_ah_attr.sl; - if (ehca_calc_ipd(shca, my_qp->init_attr.port_num, + if (ehca_calc_ipd(shca, mqpcb->alt_phys_port, attr->alt_ah_attr.static_rate, &mqpcb->max_static_rate_al)) { ret = -EINVAL; diff --git a/drivers/infiniband/hw/ipath/ipath_cq.c b/drivers/infiniband/hw/ipath/ipath_cq.c index 08d8ae148cd0..d1380c7a1703 100644 --- a/drivers/infiniband/hw/ipath/ipath_cq.c +++ b/drivers/infiniband/hw/ipath/ipath_cq.c @@ -395,12 +395,9 @@ int ipath_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata) goto bail; } - /* - * Return the address of the WC as the offset to mmap. - * See ipath_mmap() for details. - */ + /* Check that we can write the offset to mmap. */ if (udata && udata->outlen >= sizeof(__u64)) { - __u64 offset = (__u64) wc; + __u64 offset = 0; ret = ib_copy_to_udata(udata, &offset, sizeof(offset)); if (ret) @@ -450,6 +447,18 @@ int ipath_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata) struct ipath_mmap_info *ip = cq->ip; ipath_update_mmap_info(dev, ip, sz, wc); + + /* + * Return the offset to mmap. + * See ipath_mmap() for details. + */ + if (udata && udata->outlen >= sizeof(__u64)) { + ret = ib_copy_to_udata(udata, &ip->offset, + sizeof(ip->offset)); + if (ret) + goto bail; + } + spin_lock_irq(&dev->pending_lock); if (list_empty(&ip->pending_mmaps)) list_add(&ip->pending_mmaps, &dev->pending_mmaps); diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c index 6a41fdbc8e57..b997ff88401b 100644 --- a/drivers/infiniband/hw/ipath/ipath_qp.c +++ b/drivers/infiniband/hw/ipath/ipath_qp.c @@ -835,7 +835,8 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd, init_attr->qp_type); if (err) { ret = ERR_PTR(err); - goto bail_rwq; + vfree(qp->r_rq.wq); + goto bail_qp; } qp->ip = NULL; ipath_reset_qp(qp); @@ -863,7 +864,7 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd, sizeof(offset)); if (err) { ret = ERR_PTR(err); - goto bail_rwq; + goto bail_ip; } } else { u32 s = sizeof(struct ipath_rwq) + @@ -875,7 +876,7 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd, qp->r_rq.wq); if (!qp->ip) { ret = ERR_PTR(-ENOMEM); - goto bail_rwq; + goto bail_ip; } err = ib_copy_to_udata(udata, &(qp->ip->offset), @@ -907,9 +908,11 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd, goto bail; bail_ip: - kfree(qp->ip); -bail_rwq: - vfree(qp->r_rq.wq); + if (qp->ip) + kref_put(&qp->ip->ref, ipath_release_mmap_info); + else + vfree(qp->r_rq.wq); + ipath_free_qp(&dev->qp_table, qp); bail_qp: kfree(qp); bail_swq: diff --git a/drivers/infiniband/hw/ipath/ipath_srq.c b/drivers/infiniband/hw/ipath/ipath_srq.c index 40c36ec19016..2fef36f4b675 100644 --- a/drivers/infiniband/hw/ipath/ipath_srq.c +++ b/drivers/infiniband/hw/ipath/ipath_srq.c @@ -59,7 +59,7 @@ int ipath_post_srq_receive(struct ib_srq *ibsrq, struct ib_recv_wr *wr, if ((unsigned) wr->num_sge > srq->rq.max_sge) { *bad_wr = wr; - ret = -ENOMEM; + ret = -EINVAL; goto bail; } @@ -211,11 +211,11 @@ int ipath_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, struct ib_udata *udata) { struct ipath_srq *srq = to_isrq(ibsrq); + struct ipath_rwq *wq; int ret = 0; if (attr_mask & IB_SRQ_MAX_WR) { struct ipath_rwq *owq; - struct ipath_rwq *wq; struct ipath_rwqe *p; u32 sz, size, n, head, tail; @@ -236,27 +236,20 @@ int ipath_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, goto bail; } - /* - * Return the address of the RWQ as the offset to mmap. - * See ipath_mmap() for details. - */ + /* Check that we can write the offset to mmap. */ if (udata && udata->inlen >= sizeof(__u64)) { __u64 offset_addr; - __u64 offset = (__u64) wq; + __u64 offset = 0; ret = ib_copy_from_udata(&offset_addr, udata, sizeof(offset_addr)); - if (ret) { - vfree(wq); - goto bail; - } + if (ret) + goto bail_free; udata->outbuf = (void __user *) offset_addr; ret = ib_copy_to_udata(udata, &offset, sizeof(offset)); - if (ret) { - vfree(wq); - goto bail; - } + if (ret) + goto bail_free; } spin_lock_irq(&srq->rq.lock); @@ -277,10 +270,8 @@ int ipath_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, else n -= tail; if (size <= n) { - spin_unlock_irq(&srq->rq.lock); - vfree(wq); ret = -EINVAL; - goto bail; + goto bail_unlock; } n = 0; p = wq->wq; @@ -314,6 +305,18 @@ int ipath_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, u32 s = sizeof(struct ipath_rwq) + size * sz; ipath_update_mmap_info(dev, ip, s, wq); + + /* + * Return the offset to mmap. + * See ipath_mmap() for details. + */ + if (udata && udata->inlen >= sizeof(__u64)) { + ret = ib_copy_to_udata(udata, &ip->offset, + sizeof(ip->offset)); + if (ret) + goto bail; + } + spin_lock_irq(&dev->pending_lock); if (list_empty(&ip->pending_mmaps)) list_add(&ip->pending_mmaps, @@ -328,7 +331,12 @@ int ipath_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, srq->limit = attr->srq_limit; spin_unlock_irq(&srq->rq.lock); } + goto bail; +bail_unlock: + spin_unlock_irq(&srq->rq.lock); +bail_free: + vfree(wq); bail: return ret; } diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index 74f77e7c2c1b..c4c998446c7b 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -302,8 +302,10 @@ static int ipath_post_one_send(struct ipath_qp *qp, struct ib_send_wr *wr) next = qp->s_head + 1; if (next >= qp->s_size) next = 0; - if (next == qp->s_last) - goto bail_inval; + if (next == qp->s_last) { + ret = -ENOMEM; + goto bail; + } wqe = get_swqe_ptr(qp, qp->s_head); wqe->wr = *wr; @@ -404,7 +406,7 @@ static int ipath_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, if ((unsigned) wr->num_sge > qp->r_rq.max_sge) { *bad_wr = wr; - ret = -ENOMEM; + ret = -EINVAL; goto bail; } diff --git a/drivers/infiniband/ulp/iser/iser_memory.c b/drivers/infiniband/ulp/iser/iser_memory.c index d68798061795..4a17743a639f 100644 --- a/drivers/infiniband/ulp/iser/iser_memory.c +++ b/drivers/infiniband/ulp/iser/iser_memory.c @@ -310,13 +310,15 @@ static unsigned int iser_data_buf_aligned_len(struct iser_data_buf *data, if (i + 1 < data->dma_nents) { next_addr = ib_sg_dma_address(ibdev, sg_next(sg)); /* are i, i+1 fragments of the same page? */ - if (end_addr == next_addr) + if (end_addr == next_addr) { + cnt++; continue; - else if (!IS_4K_ALIGNED(end_addr)) { + } else if (!IS_4K_ALIGNED(end_addr)) { ret_len = cnt + 1; break; } } + cnt++; } if (i == data->dma_nents) ret_len = cnt; /* loop ended */ diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 2316a018fae6..dfa6592c10f6 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -286,7 +286,7 @@ config KEYBOARD_MAPLE config KEYBOARD_BFIN tristate "Blackfin BF54x keypad support" - depends on BF54x + depends on (BF54x && !BF544) help Say Y here if you want to use the BF54x keypad. diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 3eddf52a0bba..6a9ca4bdcb74 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -75,16 +75,32 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) for (i = 0; i < pdata->nbuttons; i++) { struct gpio_keys_button *button = &pdata->buttons[i]; - int irq = gpio_to_irq(button->gpio); + int irq; unsigned int type = button->type ?: EV_KEY; + error = gpio_request(button->gpio, button->desc ?: "gpio_keys"); + if (error < 0) { + pr_err("gpio-keys: failed to request GPIO %d," + " error %d\n", button->gpio, error); + goto fail; + } + + error = gpio_direction_input(button->gpio); + if (error < 0) { + pr_err("gpio-keys: failed to configure input" + " direction for GPIO %d, error %d\n", + button->gpio, error); + gpio_free(button->gpio); + goto fail; + } + + irq = gpio_to_irq(button->gpio); if (irq < 0) { error = irq; - printk(KERN_ERR - "gpio-keys: " - "Unable to get irq number for GPIO %d," - "error %d\n", + pr_err("gpio-keys: Unable to get irq number" + " for GPIO %d, error %d\n", button->gpio, error); + gpio_free(button->gpio); goto fail; } @@ -94,9 +110,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) button->desc ? button->desc : "gpio_keys", pdev); if (error) { - printk(KERN_ERR - "gpio-keys: Unable to claim irq %d; error %d\n", + pr_err("gpio-keys: Unable to claim irq %d; error %d\n", irq, error); + gpio_free(button->gpio); goto fail; } @@ -108,8 +124,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) error = input_register_device(input); if (error) { - printk(KERN_ERR - "gpio-keys: Unable to register input device, " + pr_err("gpio-keys: Unable to register input device, " "error: %d\n", error); goto fail; } @@ -119,8 +134,10 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) return 0; fail: - while (--i >= 0) + while (--i >= 0) { free_irq(gpio_to_irq(pdata->buttons[i].gpio), pdev); + gpio_free(pdata->buttons[i].gpio); + } platform_set_drvdata(pdev, NULL); input_free_device(input); @@ -139,6 +156,7 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) for (i = 0; i < pdata->nbuttons; i++) { int irq = gpio_to_irq(pdata->buttons[i].gpio); free_irq(irq, pdev); + gpio_free(pdata->buttons[i].gpio); } input_unregister_device(input); diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 5ce632ca6815..b88569e21d60 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -21,7 +21,7 @@ if SERIO config SERIO_I8042 tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86 default y - depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BFIN + depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN ---help--- i8042 is the chip over which the standard AT keyboard and PS/2 mouse are connected to the computer. If you use these devices, diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index f8fe42148093..c5e68dcd88ac 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -110,6 +110,14 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "5a"), }, }, + { + .ident = "Microsoft Virtual Machine", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"), + DMI_MATCH(DMI_PRODUCT_VERSION, "VS2005R2"), + }, + }, { } }; diff --git a/drivers/isdn/hisax/hfcscard.c b/drivers/isdn/hisax/hfcscard.c index 57670dc5034d..909d6709ec16 100644 --- a/drivers/isdn/hisax/hfcscard.c +++ b/drivers/isdn/hisax/hfcscard.c @@ -118,8 +118,7 @@ hfcs_card_msg(struct IsdnCardState *cs, int mt, void *arg) return(0); case CARD_INIT: delay = (75*HZ)/100 +1; - cs->hw.hfcD.timer.expires = jiffies + delay; - add_timer(&cs->hw.hfcD.timer); + mod_timer(&cs->hw.hfcD.timer, jiffies + delay); spin_lock_irqsave(&cs->lock, flags); reset_hfcs(cs); init2bds0(cs); diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index b39d1f5b378e..ced83c202cac 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -2104,7 +2104,7 @@ isdn_net_find_icall(int di, int ch, int idx, setup_parm *setup) u_long flags; isdn_net_dev *p; isdn_net_phone *n; - char nr[32]; + char nr[ISDN_MSNLEN]; char *my_eaz; /* Search name in netdev-chain */ @@ -2113,7 +2113,7 @@ isdn_net_find_icall(int di, int ch, int idx, setup_parm *setup) nr[1] = '\0'; printk(KERN_INFO "isdn_net: Incoming call without OAD, assuming '0'\n"); } else - strcpy(nr, setup->phone); + strlcpy(nr, setup->phone, ISDN_MSNLEN); si1 = (int) setup->si1; si2 = (int) setup->si2; if (!setup->eazmsn[0]) { @@ -2789,7 +2789,7 @@ isdn_net_setcfg(isdn_net_ioctl_cfg * cfg) chidx = -1; } } - strcpy(lp->msn, cfg->eaz); + strlcpy(lp->msn, cfg->eaz, sizeof(lp->msn)); lp->pre_device = drvidx; lp->pre_channel = chidx; lp->onhtime = cfg->onhtime; @@ -2936,7 +2936,7 @@ isdn_net_addphone(isdn_net_ioctl_phone * phone) if (p) { if (!(n = kmalloc(sizeof(isdn_net_phone), GFP_KERNEL))) return -ENOMEM; - strcpy(n->num, phone->phone); + strlcpy(n->num, phone->phone, sizeof(n->num)); n->next = p->local->phone[phone->outgoing & 1]; p->local->phone[phone->outgoing & 1] = n; return 0; diff --git a/drivers/kvm/kvm_main.c b/drivers/kvm/kvm_main.c index 07ae280e8fe5..47c10b8f89b3 100644 --- a/drivers/kvm/kvm_main.c +++ b/drivers/kvm/kvm_main.c @@ -1188,8 +1188,7 @@ int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address) int emulate_clts(struct kvm_vcpu *vcpu) { - vcpu->cr0 &= ~X86_CR0_TS; - kvm_x86_ops->set_cr0(vcpu, vcpu->cr0); + kvm_x86_ops->set_cr0(vcpu, vcpu->cr0 & ~X86_CR0_TS); return X86EMUL_CONTINUE; } diff --git a/drivers/kvm/svm.c b/drivers/kvm/svm.c index 7a6eead63a6b..4e04e49a2f1c 100644 --- a/drivers/kvm/svm.c +++ b/drivers/kvm/svm.c @@ -663,6 +663,7 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu) wrmsrl(host_save_user_msrs[i], svm->host_user_msrs[i]); rdtscll(vcpu->host_tsc); + kvm_put_guest_fpu(vcpu); } static void svm_vcpu_decache(struct kvm_vcpu *vcpu) diff --git a/drivers/kvm/x86_emulate.c b/drivers/kvm/x86_emulate.c index 33b181451557..bd46de6bf891 100644 --- a/drivers/kvm/x86_emulate.c +++ b/drivers/kvm/x86_emulate.c @@ -448,8 +448,7 @@ struct operand { #define JMP_REL(rel) \ do { \ - _eip += (int)(rel); \ - _eip = ((op_bytes == 2) ? (uint16_t)_eip : (uint32_t)_eip); \ + register_address_increment(_eip, rel); \ } while (0) /* @@ -1147,7 +1146,7 @@ done_prefixes: } register_address_increment(_regs[VCPU_REGS_RSP], -dst.bytes); - if ((rc = ops->write_std( + if ((rc = ops->write_emulated( register_address(ctxt->ss_base, _regs[VCPU_REGS_RSP]), &dst.val, dst.bytes, ctxt->vcpu)) != 0) @@ -1359,6 +1358,7 @@ special_insn: } src.val = (unsigned long) _eip; JMP_REL(rel); + op_bytes = ad_bytes; goto push; } case 0xe9: /* jmp rel */ diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index 66f38722253a..e2eec38c83c2 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -247,6 +247,8 @@ static void lg_del_vq(struct virtqueue *vq) { struct lguest_vq_info *lvq = vq->priv; + /* Release the interrupt */ + free_irq(lvq->config.irq, vq); /* Tell virtio_ring.c to free the virtqueue. */ vring_del_virtqueue(vq); /* Unmap the pages containing the ring. */ diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 8135e4c3bf47..afd82966f9a0 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -156,7 +156,7 @@ static void sm501_dump_clk(struct sm501_devdata *sm) dev_dbg(sm->dev, "PM0[%c]: " "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), " -x "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n", + "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n", (pmc & 3 ) == 0 ? '*' : '-', fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31, px_div)), fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15, misc_div)), diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index bb13858f60a1..b0f68031b49d 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -338,7 +338,7 @@ static void sony_laptop_report_input_event(u8 event) dprintk("unknown input event %.2x\n", event); } -static int sony_laptop_setup_input(void) +static int sony_laptop_setup_input(struct acpi_device *acpi_device) { struct input_dev *jog_dev; struct input_dev *key_dev; @@ -379,6 +379,7 @@ static int sony_laptop_setup_input(void) key_dev->name = "Sony Vaio Keys"; key_dev->id.bustype = BUS_ISA; key_dev->id.vendor = PCI_VENDOR_ID_SONY; + key_dev->dev.parent = &acpi_device->dev; /* Initialize the Input Drivers: special keys */ set_bit(EV_KEY, key_dev->evbit); @@ -410,6 +411,7 @@ static int sony_laptop_setup_input(void) jog_dev->name = "Sony Vaio Jogdial"; jog_dev->id.bustype = BUS_ISA; jog_dev->id.vendor = PCI_VENDOR_ID_SONY; + key_dev->dev.parent = &acpi_device->dev; jog_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); jog_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_MIDDLE); @@ -1006,7 +1008,7 @@ static int sony_nc_add(struct acpi_device *device) } /* setup input devices and helper fifo */ - result = sony_laptop_setup_input(); + result = sony_laptop_setup_input(device); if (result) { printk(KERN_ERR DRV_PFX "Unabe to create input devices.\n"); @@ -1034,7 +1036,7 @@ static int sony_nc_add(struct acpi_device *device) sony_backlight_device->props.brightness = sony_backlight_get_brightness (sony_backlight_device); - sony_backlight_device->props.max_brightness = + sony_backlight_device->props.max_brightness = SONY_MAX_BRIGHTNESS - 1; } @@ -2453,7 +2455,7 @@ static int sony_pic_add(struct acpi_device *device) } /* setup input devices and helper fifo */ - result = sony_laptop_setup_input(); + result = sony_laptop_setup_input(device); if (result) { printk(KERN_ERR DRV_PFX "Unabe to create input devices.\n"); diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index e953276664a0..ab23a3221585 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -21,7 +21,7 @@ * 02110-1301, USA. */ -#define IBM_VERSION "0.16" +#define IBM_VERSION "0.17" #define TPACPI_SYSFS_VERSION 0x020000 /* @@ -964,15 +964,15 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */ KEY_UNKNOWN, /* 0x0D: FN+INSERT */ KEY_UNKNOWN, /* 0x0E: FN+DELETE */ - KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */ + KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */ /* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */ - KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */ + KEY_RESERVED, /* 0x10: FN+END (brightness down) */ KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ - KEY_VOLUMEUP, /* 0x14: VOLUME UP */ - KEY_VOLUMEDOWN, /* 0x15: VOLUME DOWN */ - KEY_MUTE, /* 0x16: MUTE */ + KEY_RESERVED, /* 0x14: VOLUME UP */ + KEY_RESERVED, /* 0x15: VOLUME DOWN */ + KEY_RESERVED, /* 0x16: MUTE */ KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */ /* (assignments unknown, please report if found) */ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, @@ -993,9 +993,9 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ - KEY_VOLUMEUP, /* 0x14: VOLUME UP */ - KEY_VOLUMEDOWN, /* 0x15: VOLUME DOWN */ - KEY_MUTE, /* 0x16: MUTE */ + KEY_RESERVED, /* 0x14: VOLUME UP */ + KEY_RESERVED, /* 0x15: VOLUME DOWN */ + KEY_RESERVED, /* 0x16: MUTE */ KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */ /* (assignments unknown, please report if found) */ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, @@ -1342,9 +1342,8 @@ static int hotkey_read(char *p) return len; } - res = mutex_lock_interruptible(&hotkey_mutex); - if (res < 0) - return res; + if (mutex_lock_interruptible(&hotkey_mutex)) + return -ERESTARTSYS; res = hotkey_get(&status, &mask); mutex_unlock(&hotkey_mutex); if (res) @@ -1373,9 +1372,8 @@ static int hotkey_write(char *buf) if (!tp_features.hotkey) return -ENODEV; - res = mutex_lock_interruptible(&hotkey_mutex); - if (res < 0) - return res; + if (mutex_lock_interruptible(&hotkey_mutex)) + return -ERESTARTSYS; res = hotkey_get(&status, &mask); if (res) @@ -3114,6 +3112,99 @@ static struct backlight_ops ibm_backlight_data = { static struct mutex brightness_mutex; +static int __init tpacpi_query_bcll_levels(acpi_handle handle) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + int rc; + + if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) { + obj = (union acpi_object *)buffer.pointer; + if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) { + printk(IBM_ERR "Unknown BCLL data, " + "please report this to %s\n", IBM_MAIL); + rc = 0; + } else { + rc = obj->package.count; + } + } else { + return 0; + } + + kfree(buffer.pointer); + return rc; +} + +static acpi_status __init brightness_find_bcll(acpi_handle handle, u32 lvl, + void *context, void **rv) +{ + char name[ACPI_PATH_SEGMENT_LENGTH]; + struct acpi_buffer buffer = { sizeof(name), &name }; + + if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) && + !strncmp("BCLL", name, sizeof(name) - 1)) { + if (tpacpi_query_bcll_levels(handle) == 16) { + *rv = handle; + return AE_CTRL_TERMINATE; + } else { + return AE_OK; + } + } else { + return AE_OK; + } +} + +static int __init brightness_check_levels(void) +{ + int status; + void *found_node = NULL; + + if (!vid_handle) { + IBM_ACPIHANDLE_INIT(vid); + } + if (!vid_handle) + return 0; + + /* Search for a BCLL package with 16 levels */ + status = acpi_walk_namespace(ACPI_TYPE_PACKAGE, vid_handle, 3, + brightness_find_bcll, NULL, &found_node); + + return (ACPI_SUCCESS(status) && found_node != NULL); +} + +static acpi_status __init brightness_find_bcl(acpi_handle handle, u32 lvl, + void *context, void **rv) +{ + char name[ACPI_PATH_SEGMENT_LENGTH]; + struct acpi_buffer buffer = { sizeof(name), &name }; + + if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) && + !strncmp("_BCL", name, sizeof(name) - 1)) { + *rv = handle; + return AE_CTRL_TERMINATE; + } else { + return AE_OK; + } +} + +static int __init brightness_check_std_acpi_support(void) +{ + int status; + void *found_node = NULL; + + if (!vid_handle) { + IBM_ACPIHANDLE_INIT(vid); + } + if (!vid_handle) + return 0; + + /* Search for a _BCL method, but don't execute it */ + status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3, + brightness_find_bcl, NULL, &found_node); + + return (ACPI_SUCCESS(status) && found_node != NULL); +} + static int __init brightness_init(struct ibm_init_struct *iibm) { int b; @@ -3122,6 +3213,18 @@ static int __init brightness_init(struct ibm_init_struct *iibm) mutex_init(&brightness_mutex); + if (!brightness_enable) { + dbg_printk(TPACPI_DBG_INIT, + "brightness support disabled by module parameter\n"); + return 1; + } else if (brightness_enable > 1) { + if (brightness_check_std_acpi_support()) { + printk(IBM_NOTICE + "standard ACPI backlight interface available, not loading native one...\n"); + return 1; + } + } + if (!brightness_mode) { if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) brightness_mode = 2; @@ -3135,10 +3238,17 @@ static int __init brightness_init(struct ibm_init_struct *iibm) if (brightness_mode > 3) return -EINVAL; + tp_features.bright_16levels = + thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO && + brightness_check_levels(); + b = brightness_get(NULL); if (b < 0) return 1; + if (tp_features.bright_16levels) + printk(IBM_INFO "detected a 16-level brightness capable ThinkPad\n"); + ibm_backlight_device = backlight_device_register( TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL, &ibm_backlight_data); @@ -3148,7 +3258,8 @@ static int __init brightness_init(struct ibm_init_struct *iibm) } vdbg_printk(TPACPI_DBG_INIT, "brightness is supported\n"); - ibm_backlight_device->props.max_brightness = 7; + ibm_backlight_device->props.max_brightness = + (tp_features.bright_16levels)? 15 : 7; ibm_backlight_device->props.brightness = b; backlight_update_status(ibm_backlight_device); @@ -3167,6 +3278,8 @@ static void brightness_exit(void) static int brightness_update_status(struct backlight_device *bd) { + /* it is the backlight class's job (caller) to handle + * EINTR and other errors properly */ return brightness_set( (bd->props.fb_blank == FB_BLANK_UNBLANK && bd->props.power == FB_BLANK_UNBLANK) ? @@ -3184,13 +3297,14 @@ static int brightness_get(struct backlight_device *bd) if (brightness_mode & 1) { if (!acpi_ec_read(brightness_offset, &lec)) return -EIO; - lec &= 7; + lec &= (tp_features.bright_16levels)? 0x0f : 0x07; level = lec; }; if (brightness_mode & 2) { lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS) & TP_NVRAM_MASK_LEVEL_BRIGHTNESS) >> TP_NVRAM_POS_LEVEL_BRIGHTNESS; + lcmos &= (tp_features.bright_16levels)? 0x0f : 0x07; level = lcmos; } @@ -3206,12 +3320,13 @@ static int brightness_get(struct backlight_device *bd) return level; } +/* May return EINTR which can always be mapped to ERESTARTSYS */ static int brightness_set(int value) { int cmos_cmd, inc, i, res; int current_value; - if (value > 7) + if (value > ((tp_features.bright_16levels)? 15 : 7)) return -EINVAL; res = mutex_lock_interruptible(&brightness_mutex); @@ -3227,7 +3342,7 @@ static int brightness_set(int value) cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; - inc = value > current_value ? 1 : -1; + inc = (value > current_value)? 1 : -1; res = 0; for (i = current_value; i != value; i += inc) { @@ -3256,10 +3371,11 @@ static int brightness_read(char *p) if ((level = brightness_get(NULL)) < 0) { len += sprintf(p + len, "level:\t\tunreadable\n"); } else { - len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); + len += sprintf(p + len, "level:\t\t%d\n", level); len += sprintf(p + len, "commands:\tup, down\n"); len += sprintf(p + len, "commands:\tlevel <level>" - " (<level> is 0-7)\n"); + " (<level> is 0-%d)\n", + (tp_features.bright_16levels) ? 15 : 7); } return len; @@ -3268,28 +3384,34 @@ static int brightness_read(char *p) static int brightness_write(char *buf) { int level; - int new_level; + int rc; char *cmd; + int max_level = (tp_features.bright_16levels) ? 15 : 7; - while ((cmd = next_cmd(&buf))) { - if ((level = brightness_get(NULL)) < 0) - return level; - level &= 7; + level = brightness_get(NULL); + if (level < 0) + return level; + while ((cmd = next_cmd(&buf))) { if (strlencmp(cmd, "up") == 0) { - new_level = level == 7 ? 7 : level + 1; + if (level < max_level) + level++; } else if (strlencmp(cmd, "down") == 0) { - new_level = level == 0 ? 0 : level - 1; - } else if (sscanf(cmd, "level %d", &new_level) == 1 && - new_level >= 0 && new_level <= 7) { - /* new_level set */ + if (level > 0) + level--; + } else if (sscanf(cmd, "level %d", &level) == 1 && + level >= 0 && level <= max_level) { + /* new level set */ } else return -EINVAL; - - brightness_set(new_level); } - return 0; + /* + * Now we know what the final level should be, so we try to set it. + * Doing it this way makes the syscall restartable in case of EINTR + */ + rc = brightness_set(level); + return (rc == -EINTR)? ERESTARTSYS : rc; } static struct ibm_struct brightness_driver_data = { @@ -3652,9 +3774,8 @@ static ssize_t fan_pwm1_store(struct device *dev, /* scale down from 0-255 to 0-7 */ newlevel = (s >> 5) & 0x07; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; rc = fan_get_status(&status); if (!rc && (status & @@ -3904,9 +4025,8 @@ static int fan_get_status_safe(u8 *status) int rc; u8 s; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; rc = fan_get_status(&s); if (!rc) fan_update_desired_level(s); @@ -4040,9 +4160,8 @@ static int fan_set_level_safe(int level) if (!fan_control_allowed) return -EPERM; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; if (level == TPACPI_FAN_LAST_LEVEL) level = fan_control_desired_level; @@ -4063,9 +4182,8 @@ static int fan_set_enable(void) if (!fan_control_allowed) return -EPERM; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; switch (fan_control_access_mode) { case TPACPI_FAN_WR_ACPI_FANS: @@ -4119,9 +4237,8 @@ static int fan_set_disable(void) if (!fan_control_allowed) return -EPERM; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; rc = 0; switch (fan_control_access_mode) { @@ -4158,9 +4275,8 @@ static int fan_set_speed(int speed) if (!fan_control_allowed) return -EPERM; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; rc = 0; switch (fan_control_access_mode) { @@ -4701,9 +4817,15 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp) unsigned int i; struct ibm_struct *ibm; + if (!kp || !kp->name || !val) + return -EINVAL; + for (i = 0; i < ARRAY_SIZE(ibms_init); i++) { ibm = ibms_init[i].data; - BUG_ON(ibm == NULL); + WARN_ON(ibm == NULL); + + if (!ibm || !ibm->name) + continue; if (strcmp(ibm->name, kp->name) == 0 && ibm->write) { if (strlen(val) > sizeof(ibms_init[i].param) - 2) @@ -4732,6 +4854,9 @@ module_param_named(fan_control, fan_control_allowed, bool, 0); static int brightness_mode; module_param_named(brightness_mode, brightness_mode, int, 0); +static unsigned int brightness_enable = 2; /* 2 = auto, 0 = no, 1 = yes */ +module_param(brightness_enable, uint, 0); + static unsigned int hotkey_report_mode; module_param(hotkey_report_mode, uint, 0); diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h index 3abcc8120634..8fba2bbe345e 100644 --- a/drivers/misc/thinkpad_acpi.h +++ b/drivers/misc/thinkpad_acpi.h @@ -84,7 +84,7 @@ /* ThinkPad CMOS NVRAM constants */ #define TP_NVRAM_ADDR_BRIGHTNESS 0x5e -#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x07 +#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x0f #define TP_NVRAM_POS_LEVEL_BRIGHTNESS 0 #define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") @@ -246,6 +246,7 @@ static struct { u32 hotkey_wlsw:1; u32 light:1; u32 light_status:1; + u32 bright_16levels:1; u32 wan:1; u32 fan_ctrl_status_undef:1; u32 input_device_registered:1; @@ -338,6 +339,7 @@ static int bluetooth_write(char *buf); static struct backlight_device *ibm_backlight_device; static int brightness_offset = 0x31; static int brightness_mode; +static unsigned int brightness_enable; /* 0 = no, 1 = yes, 2 = auto */ static int brightness_init(struct ibm_init_struct *iibm); static void brightness_exit(void); diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index e38d5a3b2a89..aeb32a93f6a0 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -44,6 +44,9 @@ * max 8 partitions per card */ #define MMC_SHIFT 3 +#define MMC_NUM_MINORS (256 >> MMC_SHIFT) + +static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))]; /* * There is one mmc_blk_data per slot. @@ -80,6 +83,9 @@ static void mmc_blk_put(struct mmc_blk_data *md) mutex_lock(&open_lock); md->usage--; if (md->usage == 0) { + int devidx = md->disk->first_minor >> MMC_SHIFT; + __clear_bit(devidx, dev_use); + put_disk(md->disk); kfree(md); } @@ -321,7 +327,13 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) req->rq_disk->disk_name, err); goto cmd_err; } - } while (!(cmd.resp[0] & R1_READY_FOR_DATA)); + /* + * Some cards mishandle the status bits, + * so make sure to check both the busy + * indication and the card state. + */ + } while (!(cmd.resp[0] & R1_READY_FOR_DATA) || + (R1_CURRENT_STATE(cmd.resp[0]) == 7)); #if 0 if (cmd.resp[0] & ~0x00000900) @@ -400,9 +412,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) return 0; } -#define MMC_NUM_MINORS (256 >> MMC_SHIFT) - -static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))]; static inline int mmc_blk_readonly(struct mmc_card *card) { @@ -568,17 +577,12 @@ static void mmc_blk_remove(struct mmc_card *card) struct mmc_blk_data *md = mmc_get_drvdata(card); if (md) { - int devidx; - /* Stop new requests from getting into the queue */ del_gendisk(md->disk); /* Then flush out any already in there */ mmc_cleanup_queue(&md->queue); - devidx = md->disk->first_minor >> MMC_SHIFT; - __clear_bit(devidx, dev_use); - mmc_blk_put(md); } mmc_set_drvdata(card, NULL); diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 1b9c9b6da5b7..30cd13b13ac3 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -180,12 +180,13 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock blk_queue_max_hw_segments(mq->queue, host->max_hw_segs); blk_queue_max_segment_size(mq->queue, host->max_seg_size); - mq->sg = kzalloc(sizeof(struct scatterlist) * + mq->sg = kmalloc(sizeof(struct scatterlist) * host->max_phys_segs, GFP_KERNEL); if (!mq->sg) { ret = -ENOMEM; goto cleanup_queue; } + sg_init_table(mq->sg, host->max_phys_segs); } init_MUTEX(&mq->thread_sem); diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index d552de683110..eeea84c309e6 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -386,7 +386,7 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port) sdio_out(port, UART_IER, port->ier); } -static void sdio_uart_receive_chars(struct sdio_uart_port *port, int *status) +static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *status) { struct tty_struct *tty = port->tty; unsigned int ch, flag; diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c index c11a3d256051..20d5c7bd940a 100644 --- a/drivers/mmc/host/tifm_sd.c +++ b/drivers/mmc/host/tifm_sd.c @@ -16,7 +16,6 @@ #include <linux/mmc/host.h> #include <linux/highmem.h> #include <linux/scatterlist.h> -#include <linux/log2.h> #include <asm/io.h> #define DRIVER_NAME "tifm_sd" @@ -638,17 +637,15 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) goto err_out; } - if (mrq->data && !is_power_of_2(mrq->data->blksz)) { - printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n", - sock->dev.bus_id, mrq->data->blksz); - mrq->cmd->error = -EINVAL; - goto err_out; - } - host->cmd_flags = 0; host->block_pos = 0; host->sg_pos = 0; + if (mrq->data && !is_power_of_2(mrq->data->blksz)) + host->no_dma = 1; + else + host->no_dma = no_dma ? 1 : 0; + if (r_data) { tifm_sd_set_data_timeout(host, r_data); @@ -676,7 +673,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) : PCI_DMA_FROMDEVICE)) { printk(KERN_ERR "%s : scatterlist map failed\n", sock->dev.bus_id); - spin_unlock_irqrestore(&sock->lock, flags); + mrq->cmd->error = -ENOMEM; goto err_out; } host->sg_len = tifm_map_sg(sock, r_data->sg, @@ -692,7 +689,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) r_data->flags & MMC_DATA_WRITE ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); - spin_unlock_irqrestore(&sock->lock, flags); + mrq->cmd->error = -ENOMEM; goto err_out; } @@ -966,7 +963,6 @@ static int tifm_sd_probe(struct tifm_dev *sock) return -ENOMEM; host = mmc_priv(mmc); - host->no_dma = no_dma; tifm_set_drvdata(sock, mmc); host->dev = sock; host->timeout_jiffies = msecs_to_jiffies(1000); diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 084acfd6fc5f..0b99b5549295 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -924,7 +924,7 @@ static int __init bf537mac_probe(struct net_device *dev) if (!is_valid_ether_addr(dev->dev_addr)) { /* Grab the MAC from the board somehow - this is done in the arch/blackfin/mach-bf537/boards/eth_mac.c */ - get_bf537_ether_addr(dev->dev_addr); + bfin_get_ether_addr(dev->dev_addr); } /* If still not valid, get a random one */ diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h index 3a107ad75381..5970ea7142cd 100644 --- a/drivers/net/bfin_mac.h +++ b/drivers/net/bfin_mac.h @@ -92,4 +92,4 @@ struct bf537mac_local { struct mii_bus mii_bus; }; -extern void get_bf537_ether_addr(char *addr); +extern void bfin_get_ether_addr(char *addr); diff --git a/drivers/net/mlx4/qp.c b/drivers/net/mlx4/qp.c index 42b47639c81c..fa24e6597591 100644 --- a/drivers/net/mlx4/qp.c +++ b/drivers/net/mlx4/qp.c @@ -113,7 +113,7 @@ int mlx4_qp_modify(struct mlx4_dev *dev, struct mlx4_mtt *mtt, struct mlx4_cmd_mailbox *mailbox; int ret = 0; - if (cur_state >= MLX4_QP_NUM_STATE || cur_state >= MLX4_QP_NUM_STATE || + if (cur_state >= MLX4_QP_NUM_STATE || new_state >= MLX4_QP_NUM_STATE || !op[cur_state][new_state]) return -EINVAL; diff --git a/drivers/net/plip.c b/drivers/net/plip.c index 5071fcd8a0bd..57c98669984d 100644 --- a/drivers/net/plip.c +++ b/drivers/net/plip.c @@ -663,7 +663,7 @@ plip_receive_packet(struct net_device *dev, struct net_local *nl, case PLIP_PK_DONE: /* Inform the upper layer for the arrival of a packet. */ rcv->skb->protocol=plip_type_trans(rcv->skb, dev); - netif_rx(rcv->skb); + netif_rx_ni(rcv->skb); dev->last_rx = jiffies; dev->stats.rx_bytes += rcv->length.h; dev->stats.rx_packets++; @@ -1269,7 +1269,7 @@ static void plip_attach (struct parport *port) nl = netdev_priv(dev); nl->dev = dev; - nl->pardev = parport_register_device(port, name, plip_preempt, + nl->pardev = parport_register_device(port, dev->name, plip_preempt, plip_wakeup, plip_interrupt, 0, dev); diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index a75be57fb209..5413dbf3d4ac 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -198,8 +198,8 @@ again: if (vi->num < vi->max / 2) try_fill_recv(vi); - /* All done? */ - if (!skb) { + /* Out of packets? */ + if (received < budget) { netif_rx_complete(vi->dev, napi); if (unlikely(!vi->rvq->vq_ops->restart(vi->rvq)) && netif_rx_reschedule(vi->dev, napi)) @@ -404,8 +404,12 @@ free: static void virtnet_remove(struct virtio_device *vdev) { - unregister_netdev(vdev->priv); - free_netdev(vdev->priv); + struct virtnet_info *vi = vdev->priv; + + vdev->config->del_vq(vi->svq); + vdev->config->del_vq(vi->rvq); + unregister_netdev(vi->dev); + free_netdev(vi->dev); } static struct virtio_device_id id_table[] = { diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 277a020b35e9..50775f9234cc 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1032,7 +1032,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, } static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, - int maxpacket, struct sk_buff *skb) + struct sk_buff *skb) { int length; @@ -1041,7 +1041,7 @@ static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * but it must _not_ be a multiple of the USB packet size. */ length = roundup(skb->len, 2); - length += (2 * !(length % maxpacket)); + length += (2 * !(length % rt2x00dev->usb_maxpacket)); return length; } @@ -1643,7 +1643,6 @@ static int rt2500usb_beacon_update(struct ieee80211_hw *hw, struct data_entry *beacon; struct data_entry *guardian; int pipe = usb_sndbulkpipe(usb_dev, 1); - int max_packet = usb_maxpacket(usb_dev, pipe, 1); int length; /* @@ -1672,7 +1671,7 @@ static int rt2500usb_beacon_update(struct ieee80211_hw *hw, ring->desc_size), skb->len - ring->desc_size, control); - length = rt2500usb_get_tx_data_len(rt2x00dev, max_packet, skb); + length = rt2500usb_get_tx_data_len(rt2x00dev, skb); usb_fill_bulk_urb(beacon->priv, usb_dev, pipe, skb->data, length, rt2500usb_beacondone, beacon); diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index d1ad5251a77a..c8f16f161c28 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -418,7 +418,7 @@ struct rt2x00lib_ops { int (*write_tx_data) (struct rt2x00_dev *rt2x00dev, struct data_ring *ring, struct sk_buff *skb, struct ieee80211_tx_control *control); - int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, int maxpacket, + int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev, unsigned int queue); @@ -599,6 +599,11 @@ struct rt2x00_dev { u32 *rf; /* + * USB Max frame size (for rt2500usb & rt73usb). + */ + u16 usb_maxpacket; + + /* * Current TX power value. */ u16 tx_power; diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 73cc726c4046..1f5675dd329f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -159,7 +159,6 @@ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); struct data_entry *entry = rt2x00_get_data_entry(ring); int pipe = usb_sndbulkpipe(usb_dev, 1); - int max_packet = usb_maxpacket(usb_dev, pipe, 1); u32 length; if (rt2x00_ring_full(ring)) { @@ -194,8 +193,7 @@ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, * length of the data to usb_fill_bulk_urb. Pass the skb * to the driver to determine what the length should be. */ - length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, - max_packet, skb); + length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, skb); /* * Initialize URB and send the frame to the device. @@ -490,6 +488,11 @@ int rt2x00usb_probe(struct usb_interface *usb_intf, rt2x00dev->ops = ops; rt2x00dev->hw = hw; + rt2x00dev->usb_maxpacket = + usb_maxpacket(usb_dev, usb_sndbulkpipe(usb_dev, 1), 1); + if (!rt2x00dev->usb_maxpacket) + rt2x00dev->usb_maxpacket = 1; + retval = rt2x00usb_alloc_reg(rt2x00dev); if (retval) goto exit_free_device; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index dc640bf6b5eb..c0671c2e6e73 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1251,7 +1251,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, } static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, - int maxpacket, struct sk_buff *skb) + struct sk_buff *skb) { int length; @@ -1260,7 +1260,7 @@ static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * but it must _not_ be a multiple of the USB packet size. */ length = roundup(skb->len, 4); - length += (4 * !(length % maxpacket)); + length += (4 * !(length % rt2x00dev->usb_maxpacket)); return length; } diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index f6cc0c5b5657..1ef417cca2db 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -66,7 +66,7 @@ struct slot { char name[SLOT_NAME_SIZE]; }; -/** +/* * struct acpiphp_bridge - PCI bridge information * * for each bridge device in ACPI namespace @@ -97,7 +97,7 @@ struct acpiphp_bridge { }; -/** +/* * struct acpiphp_slot - PCI slot information * * PCI slot information for each *physical* PCI slot @@ -118,7 +118,7 @@ struct acpiphp_slot { }; -/** +/* * struct acpiphp_func - PCI function information * * PCI function information for each object in ACPI namespace @@ -137,7 +137,7 @@ struct acpiphp_func { u32 flags; /* see below */ }; -/** +/* * struct acpiphp_attention_info - device specific attention registration * * ACPI has no generic method of setting/getting attention status diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index a0ca63adad5a..c8c263875c21 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -91,10 +91,10 @@ static struct hotplug_slot_ops acpi_hotplug_slot_ops = { * acpiphp_register_attention - set attention LED callback * @info: must be completely filled with LED callbacks * - * Description: this is used to register a hardware specific ACPI + * Description: This is used to register a hardware specific ACPI * driver that manipulates the attention LED. All the fields in * info must be set. - **/ + */ int acpiphp_register_attention(struct acpiphp_attention_info *info) { int retval = -EINVAL; @@ -112,10 +112,10 @@ int acpiphp_register_attention(struct acpiphp_attention_info *info) * acpiphp_unregister_attention - unset attention LED callback * @info: must match the pointer used to register * - * Description: this is used to un-register a hardware specific acpi + * Description: This is used to un-register a hardware specific acpi * driver that manipulates the attention LED. The pointer to the * info struct must be the same as the one used to set it. - **/ + */ int acpiphp_unregister_attention(struct acpiphp_attention_info *info) { int retval = -EINVAL; @@ -133,7 +133,6 @@ int acpiphp_unregister_attention(struct acpiphp_attention_info *info) * @hotplug_slot: slot to enable * * Actual tasks are done in acpiphp_enable_slot() - * */ static int enable_slot(struct hotplug_slot *hotplug_slot) { @@ -151,7 +150,6 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) * @hotplug_slot: slot to disable * * Actual tasks are done in acpiphp_disable_slot() - * */ static int disable_slot(struct hotplug_slot *hotplug_slot) { @@ -168,15 +166,15 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) } - /** - * set_attention_status - set attention LED +/** + * set_attention_status - set attention LED * @hotplug_slot: slot to set attention LED on * @status: value to set attention LED to (0 or 1) * * attention status LED, so we use a callback that * was registered with us. This allows hardware specific * ACPI implementations to blink the light for us. - **/ + */ static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status) { int retval = -ENODEV; @@ -199,7 +197,6 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) * * Some platforms may not implement _STA method properly. * In that case, the value returned may not be reliable. - * */ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) { @@ -213,7 +210,7 @@ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) } - /** +/** * get_attention_status - get attention LED status * @hotplug_slot: slot to get status from * @value: returns with value of attention LED @@ -221,8 +218,8 @@ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) * ACPI doesn't have known method to determine the state * of the attention status LED, so we use a callback that * was registered with us. This allows hardware specific - * ACPI implementations to determine its state - **/ + * ACPI implementations to determine its state. + */ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) { int retval = -EINVAL; @@ -244,8 +241,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) * @value: pointer to store status * * ACPI doesn't provide any formal means to access latch status. - * Instead, we fake latch status from _STA - * + * Instead, we fake latch status from _STA. */ static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) { @@ -265,8 +261,7 @@ static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) * @value: pointer to store status * * ACPI doesn't provide any formal means to access adapter status. - * Instead, we fake adapter status from _STA - * + * Instead, we fake adapter status from _STA. */ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) { diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 1e125b56c9a9..ff1b1c71291a 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -82,7 +82,6 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *contex * 2. has _PS0 method * 3. has _PS3 method * 4. .. - * */ static int is_ejectable(acpi_handle handle) { @@ -986,10 +985,8 @@ static int power_off_slot(struct acpiphp_slot *slot) /** - * acpiphp_max_busnr - return the highest reserved bus number under - * the given bus. + * acpiphp_max_busnr - return the highest reserved bus number under the given bus. * @bus: bus to start search with - * */ static unsigned char acpiphp_max_busnr(struct pci_bus *bus) { @@ -1018,7 +1015,6 @@ static unsigned char acpiphp_max_busnr(struct pci_bus *bus) /** * acpiphp_bus_add - add a new bus to acpi subsystem * @func: acpiphp_func of the bridge - * */ static int acpiphp_bus_add(struct acpiphp_func *func) { @@ -1063,7 +1059,6 @@ acpiphp_bus_add_out: /** * acpiphp_bus_trim - trim a bus from acpi subsystem * @handle: handle to acpi namespace - * */ static int acpiphp_bus_trim(acpi_handle handle) { @@ -1089,7 +1084,6 @@ static int acpiphp_bus_trim(acpi_handle handle) * * This function should be called per *physical slot*, * not per each slot object in ACPI namespace. - * */ static int enable_device(struct acpiphp_slot *slot) { @@ -1185,6 +1179,7 @@ static void disable_bridges(struct pci_bus *bus) /** * disable_device - disable a slot + * @slot: ACPI PHP slot */ static int disable_device(struct acpiphp_slot *slot) { @@ -1240,14 +1235,15 @@ static int disable_device(struct acpiphp_slot *slot) /** * get_slot_status - get ACPI slot status + * @slot: ACPI PHP slot * - * if a slot has _STA for each function and if any one of them - * returned non-zero status, return it + * If a slot has _STA for each function and if any one of them + * returned non-zero status, return it. * - * if a slot doesn't have _STA and if any one of its functions' - * configuration space is configured, return 0x0f as a _STA + * If a slot doesn't have _STA and if any one of its functions' + * configuration space is configured, return 0x0f as a _STA. * - * otherwise return 0 + * Otherwise return 0. */ static unsigned int get_slot_status(struct acpiphp_slot *slot) { @@ -1281,6 +1277,7 @@ static unsigned int get_slot_status(struct acpiphp_slot *slot) /** * acpiphp_eject_slot - physically eject the slot + * @slot: ACPI PHP slot */ int acpiphp_eject_slot(struct acpiphp_slot *slot) { @@ -1314,6 +1311,7 @@ int acpiphp_eject_slot(struct acpiphp_slot *slot) /** * acpiphp_check_bridge - re-enumerate devices + * @bridge: where to begin re-enumeration * * Iterate over all slots under this bridge and make sure that if a * card is present they are enabled, and if not they are disabled. @@ -1538,13 +1536,11 @@ check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) /** * handle_hotplug_event_bridge - handle ACPI event on bridges - * * @handle: Notify()'ed acpi_handle * @type: Notify code * @context: pointer to acpiphp_bridge structure * - * handles ACPI event notification on {host,p2p} bridges - * + * Handles ACPI event notification on {host,p2p} bridges. */ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *context) { @@ -1634,13 +1630,11 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont /** * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots) - * * @handle: Notify()'ed acpi_handle * @type: Notify code * @context: pointer to acpiphp_func structure * - * handles ACPI event notification on slots - * + * Handles ACPI event notification on slots. */ static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context) { @@ -1705,7 +1699,6 @@ static struct acpi_pci_driver acpi_pci_hp_driver = { /** * acpiphp_glue_init - initializes all PCI hotplug - ACPI glue data structures - * */ int __init acpiphp_glue_init(void) { @@ -1726,7 +1719,7 @@ int __init acpiphp_glue_init(void) /** * acpiphp_glue_exit - terminates all PCI hotplug - ACPI glue data structures * - * This function frees all data allocated in acpiphp_glue_init() + * This function frees all data allocated in acpiphp_glue_init(). */ void acpiphp_glue_exit(void) { @@ -1760,7 +1753,6 @@ int __init acpiphp_get_num_slots(void) * acpiphp_for_each_slot - call function for each slot * @fn: callback function * @data: context to be passed to callback function - * */ static int acpiphp_for_each_slot(acpiphp_callback fn, void *data) { @@ -1786,6 +1778,7 @@ static int acpiphp_for_each_slot(acpiphp_callback fn, void *data) /** * acpiphp_enable_slot - power on slot + * @slot: ACPI PHP slot */ int acpiphp_enable_slot(struct acpiphp_slot *slot) { @@ -1815,6 +1808,7 @@ int acpiphp_enable_slot(struct acpiphp_slot *slot) /** * acpiphp_disable_slot - power off slot + * @slot: ACPI PHP slot */ int acpiphp_disable_slot(struct acpiphp_slot *slot) { diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c index 56829f82be4a..47d26b65e99a 100644 --- a/drivers/pci/hotplug/acpiphp_ibm.c +++ b/drivers/pci/hotplug/acpiphp_ibm.c @@ -134,11 +134,11 @@ static struct acpiphp_attention_info ibm_attention_info = * ibm_slot_from_id - workaround for bad ibm hardware * @id: the slot number that linux refers to the slot by * - * Description: this method returns the aCPI slot descriptor + * Description: This method returns the aCPI slot descriptor * corresponding to the Linux slot number. This descriptor * has info about the aPCI slot id and attention status. * This descriptor must be freed using kfree when done. - **/ + */ static union apci_descriptor *ibm_slot_from_id(int id) { int ind = 0, size; @@ -173,9 +173,9 @@ ibm_slot_done: * @slot: the hotplug_slot to work with * @status: what to set the LED to (0 or 1) * - * Description: this method is registered with the acpiphp module as a - * callback to do the device specific task of setting the LED status - **/ + * Description: This method is registered with the acpiphp module as a + * callback to do the device specific task of setting the LED status. + */ static int ibm_set_attention_status(struct hotplug_slot *slot, u8 status) { union acpi_object args[2]; @@ -213,13 +213,13 @@ static int ibm_set_attention_status(struct hotplug_slot *slot, u8 status) * @slot: the hotplug_slot to work with * @status: returns what the LED is set to (0 or 1) * - * Description: this method is registered with the acpiphp module as a - * callback to do the device specific task of getting the LED status + * Description: This method is registered with the acpiphp module as a + * callback to do the device specific task of getting the LED status. * * Because there is no direct method of getting the LED status directly * from an ACPI call, we read the aPCI table and parse out our * slot descriptor to read the status from that. - **/ + */ static int ibm_get_attention_status(struct hotplug_slot *slot, u8 *status) { union apci_descriptor *ibm_slot; @@ -245,8 +245,8 @@ static int ibm_get_attention_status(struct hotplug_slot *slot, u8 *status) * @event: the event info (device specific) * @context: passed context (our notification struct) * - * Description: this method is registered as a callback with the ACPI - * subsystem it is called when this device has an event to notify the OS of + * Description: This method is registered as a callback with the ACPI + * subsystem it is called when this device has an event to notify the OS of. * * The events actually come from the device as two events that get * synthesized into one event with data by this function. The event @@ -256,7 +256,7 @@ static int ibm_get_attention_status(struct hotplug_slot *slot, u8 *status) * From section 5.6.2.2 of the ACPI 2.0 spec, I understand that the OSPM will * only re-enable the interrupt that causes this event AFTER this method * has returned, thereby enforcing serial access for the notification struct. - **/ + */ static void ibm_handle_events(acpi_handle handle, u32 event, void *context) { u8 detail = event & 0x0f; @@ -279,16 +279,16 @@ static void ibm_handle_events(acpi_handle handle, u32 event, void *context) * ibm_get_table_from_acpi - reads the APLS buffer from ACPI * @bufp: address to pointer to allocate for the table * - * Description: this method reads the APLS buffer in from ACPI and + * Description: This method reads the APLS buffer in from ACPI and * stores the "stripped" table into a single buffer - * it allocates and passes the address back in bufp + * it allocates and passes the address back in bufp. * * If NULL is passed in as buffer, this method only calculates * the size of the table and returns that without filling - * in the buffer + * in the buffer. * - * returns < 0 on error or the size of the table on success - **/ + * Returns < 0 on error or the size of the table on success. + */ static int ibm_get_table_from_acpi(char **bufp) { union acpi_object *package; @@ -349,17 +349,18 @@ read_table_done: /** * ibm_read_apci_table - callback for the sysfs apci_table file * @kobj: the kobject this binary attribute is a part of + * @bin_attr: struct bin_attribute for this file * @buffer: the kernel space buffer to fill * @pos: the offset into the file * @size: the number of bytes requested * - * Description: gets registered with sysfs as the reader callback - * to be executed when /sys/bus/pci/slots/apci_table gets read + * Description: Gets registered with sysfs as the reader callback + * to be executed when /sys/bus/pci/slots/apci_table gets read. * * Since we don't get notified on open and close for this file, * things get really tricky here... - * our solution is to only allow reading the table in all at once - **/ + * our solution is to only allow reading the table in all at once. + */ static ssize_t ibm_read_apci_table(struct kobject *kobj, struct bin_attribute *bin_attr, char *buffer, loff_t pos, size_t size) @@ -385,10 +386,10 @@ static ssize_t ibm_read_apci_table(struct kobject *kobj, * @context: a pointer to our handle to fill when we find the device * @rv: a return value to fill if desired * - * Description: used as a callback when calling acpi_walk_namespace + * Description: Used as a callback when calling acpi_walk_namespace * to find our device. When this method returns non-zero - * acpi_walk_namespace quits its search and returns our value - **/ + * acpi_walk_namespace quits its search and returns our value. + */ static acpi_status __init ibm_find_acpi_device(acpi_handle handle, u32 lvl, void *context, void **rv) { diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index a96b739b2d35..74178875b949 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -117,12 +117,10 @@ static inline int is_slot66mhz(struct slot *slot) /** * detect_SMBIOS_pointer - find the System Management BIOS Table in mem region. - * * @begin: begin pointer for region to be scanned. * @end: end pointer for region to be scanned. * - * Returns pointer to the head of the SMBIOS tables (or NULL) - * + * Returns pointer to the head of the SMBIOS tables (or %NULL). */ static void __iomem * detect_SMBIOS_pointer(void __iomem *begin, void __iomem *end) { @@ -157,9 +155,9 @@ static void __iomem * detect_SMBIOS_pointer(void __iomem *begin, void __iomem *e /** * init_SERR - Initializes the per slot SERR generation. + * @ctrl: controller to use * * For unexpected switch opens - * */ static int init_SERR(struct controller * ctrl) { @@ -224,14 +222,15 @@ static int pci_print_IRQ_route (void) /** * get_subsequent_smbios_entry: get the next entry from bios table. - * - * Gets the first entry if previous == NULL - * Otherwise, returns the next entry - * Uses global SMBIOS Table pointer - * + * @smbios_start: where to start in the SMBIOS table + * @smbios_table: location of the SMBIOS table * @curr: %NULL or pointer to previously returned structure * - * returns a pointer to an SMBIOS structure or NULL if none found + * Gets the first entry if previous == NULL; + * otherwise, returns the next entry. + * Uses global SMBIOS Table pointer. + * + * Returns a pointer to an SMBIOS structure or NULL if none found. */ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start, void __iomem *smbios_table, @@ -272,17 +271,18 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start, /** - * get_SMBIOS_entry - * - * @type:SMBIOS structure type to be returned + * get_SMBIOS_entry - return the requested SMBIOS entry or %NULL + * @smbios_start: where to start in the SMBIOS table + * @smbios_table: location of the SMBIOS table + * @type: SMBIOS structure type to be returned * @previous: %NULL or pointer to previously returned structure * - * Gets the first entry of the specified type if previous == NULL + * Gets the first entry of the specified type if previous == %NULL; * Otherwise, returns the next entry of the given type. - * Uses global SMBIOS Table pointer - * Uses get_subsequent_smbios_entry + * Uses global SMBIOS Table pointer. + * Uses get_subsequent_smbios_entry. * - * returns a pointer to an SMBIOS structure or %NULL if none found + * Returns a pointer to an SMBIOS structure or %NULL if none found. */ static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start, void __iomem *smbios_table, @@ -581,7 +581,9 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot) /** * cpqhp_set_attention_status - Turns the Amber LED for a slot on or off - * + * @ctrl: struct controller to use + * @func: PCI device/function info + * @status: LED control flag: 1 = LED on, 0 = LED off */ static int cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func, @@ -621,7 +623,8 @@ cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func, /** * set_attention_status - Turns the Amber LED for a slot on or off - * + * @hotplug_slot: slot to change LED on + * @status: LED control flag */ static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status) { diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index 856d57b4d604..4018420c6f95 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -123,7 +123,7 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl) } /** - * cpqhp_find_slot: find the struct slot of given device + * cpqhp_find_slot - find the struct slot of given device * @ctrl: scan lots of this controller * @device: the device id to find */ @@ -305,9 +305,8 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl) /** - * sort_by_size: sort nodes on the list by their length, smallest first. + * sort_by_size - sort nodes on the list by their length, smallest first. * @head: list to sort - * */ static int sort_by_size(struct pci_resource **head) { @@ -354,9 +353,8 @@ static int sort_by_size(struct pci_resource **head) /** - * sort_by_max_size: sort nodes on the list by their length, largest first. + * sort_by_max_size - sort nodes on the list by their length, largest first. * @head: list to sort - * */ static int sort_by_max_size(struct pci_resource **head) { @@ -403,8 +401,10 @@ static int sort_by_max_size(struct pci_resource **head) /** - * do_pre_bridge_resource_split: find node of resources that are unused - * + * do_pre_bridge_resource_split - find node of resources that are unused + * @head: new list head + * @orig_head: original list head + * @alignment: max node size (?) */ static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **head, struct pci_resource **orig_head, u32 alignment) @@ -477,8 +477,9 @@ static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **h /** - * do_bridge_resource_split: find one node of resources that aren't in use - * + * do_bridge_resource_split - find one node of resources that aren't in use + * @head: list head + * @alignment: max node size (?) */ static struct pci_resource *do_bridge_resource_split(struct pci_resource **head, u32 alignment) { @@ -525,14 +526,13 @@ error: /** - * get_io_resource: find first node of given size not in ISA aliasing window. + * get_io_resource - find first node of given size not in ISA aliasing window. * @head: list to search * @size: size of node to find, must be a power of two. * - * Description: this function sorts the resource list by size and then returns + * Description: This function sorts the resource list by size and then returns * returns the first node of "size" length that is not in the ISA aliasing * window. If it finds a node larger than "size" it will split it up. - * */ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size) { @@ -620,7 +620,7 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size /** - * get_max_resource: get largest node which has at least the given size. + * get_max_resource - get largest node which has at least the given size. * @head: the list to search the node in * @size: the minimum size of the node to find * @@ -712,7 +712,7 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz /** - * get_resource: find resource of given size and split up larger ones. + * get_resource - find resource of given size and split up larger ones. * @head: the list to search for resources * @size: the size limit to use * @@ -804,14 +804,14 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size) /** - * cpqhp_resource_sort_and_combine: sort nodes by base addresses and clean up. + * cpqhp_resource_sort_and_combine - sort nodes by base addresses and clean up * @head: the list to sort and clean up * * Description: Sorts all of the nodes in the list in ascending order by * their base addresses. Also does garbage collection by * combining adjacent nodes. * - * returns 0 if success + * Returns %0 if success. */ int cpqhp_resource_sort_and_combine(struct pci_resource **head) { @@ -951,9 +951,9 @@ irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data) /** * cpqhp_slot_create - Creates a node and adds it to the proper bus. - * @busnumber - bus where new node is to be located + * @busnumber: bus where new node is to be located * - * Returns pointer to the new node or NULL if unsuccessful + * Returns pointer to the new node or %NULL if unsuccessful. */ struct pci_func *cpqhp_slot_create(u8 busnumber) { @@ -986,7 +986,7 @@ struct pci_func *cpqhp_slot_create(u8 busnumber) * slot_remove - Removes a node from the linked list of slots. * @old_slot: slot to remove * - * Returns 0 if successful, !0 otherwise. + * Returns %0 if successful, !0 otherwise. */ static int slot_remove(struct pci_func * old_slot) { @@ -1026,7 +1026,7 @@ static int slot_remove(struct pci_func * old_slot) * bridge_slot_remove - Removes a node from the linked list of slots. * @bridge: bridge to remove * - * Returns 0 if successful, !0 otherwise. + * Returns %0 if successful, !0 otherwise. */ static int bridge_slot_remove(struct pci_func *bridge) { @@ -1071,7 +1071,7 @@ out: * cpqhp_slot_find - Looks for a node by bus, and device, multiple functions accessed * @bus: bus to find * @device: device to find - * @index: is 0 for first function found, 1 for the second... + * @index: is %0 for first function found, %1 for the second... * * Returns pointer to the node if successful, %NULL otherwise. */ @@ -1115,16 +1115,13 @@ static int is_bridge(struct pci_func * func) /** - * set_controller_speed - set the frequency and/or mode of a specific - * controller segment. - * + * set_controller_speed - set the frequency and/or mode of a specific controller segment. * @ctrl: controller to change frequency/mode for. * @adapter_speed: the speed of the adapter we want to match. * @hp_slot: the slot number where the adapter is installed. * - * Returns 0 if we successfully change frequency and/or mode to match the + * Returns %0 if we successfully change frequency and/or mode to match the * adapter speed. - * */ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot) { @@ -1253,13 +1250,14 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ /** * board_replaced - Called after a board has been replaced in the system. + * @func: PCI device/function information + * @ctrl: hotplug controller * - * This is only used if we don't have resources for hot add - * Turns power on for the board - * Checks to see if board is the same - * If board is same, reconfigures it + * This is only used if we don't have resources for hot add. + * Turns power on for the board. + * Checks to see if board is the same. + * If board is same, reconfigures it. * If board isn't same, turns it back off. - * */ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) { @@ -1403,10 +1401,11 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) /** * board_added - Called after a board has been added to the system. + * @func: PCI device/function info + * @ctrl: hotplug controller * - * Turns power on for the board - * Configures board - * + * Turns power on for the board. + * Configures board. */ static u32 board_added(struct pci_func *func, struct controller *ctrl) { @@ -1607,8 +1606,10 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) /** - * remove_board - Turns off slot and LED's - * + * remove_board - Turns off slot and LEDs + * @func: PCI device/function info + * @replace_flag: whether replacing or adding a new device + * @ctrl: target controller */ static u32 remove_board(struct pci_func * func, u32 replace_flag, struct controller * ctrl) { @@ -1902,11 +1903,11 @@ static void interrupt_event_handler(struct controller *ctrl) /** - * cpqhp_pushbutton_thread + * cpqhp_pushbutton_thread - handle pushbutton events + * @slot: target slot (struct) * - * Scheduled procedure to handle blocking stuff for the pushbuttons + * Scheduled procedure to handle blocking stuff for the pushbuttons. * Handles all pending events and exits. - * */ void cpqhp_pushbutton_thread(unsigned long slot) { @@ -2137,9 +2138,10 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func) } /** - * switch_leds: switch the leds, go from one site to the other. + * switch_leds - switch the leds, go from one site to the other. * @ctrl: controller to use * @num_of_slots: number of slots to use + * @work_LED: LED control value * @direction: 1 to start from the left side, 0 to start right. */ static void switch_leds(struct controller *ctrl, const int num_of_slots, @@ -2165,11 +2167,11 @@ static void switch_leds(struct controller *ctrl, const int num_of_slots, } /** - * hardware_test - runs hardware tests + * cpqhp_hardware_test - runs hardware tests + * @ctrl: target controller + * @test_num: the number written to the "test" file in sysfs. * * For hot plug ctrl folks to play with. - * test_num is the number written to the "test" file in sysfs - * */ int cpqhp_hardware_test(struct controller *ctrl, int test_num) { @@ -2249,14 +2251,12 @@ int cpqhp_hardware_test(struct controller *ctrl, int test_num) /** * configure_new_device - Configures the PCI header information of one board. - * * @ctrl: pointer to controller structure * @func: pointer to function structure * @behind_bridge: 1 if this is a recursive call, 0 if not * @resources: pointer to set of resource lists * - * Returns 0 if success - * + * Returns 0 if success. */ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func, u8 behind_bridge, struct resource_lists * resources) @@ -2346,15 +2346,13 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func /** * configure_new_function - Configures the PCI header information of one device - * * @ctrl: pointer to controller structure * @func: pointer to function structure * @behind_bridge: 1 if this is a recursive call, 0 if not * @resources: pointer to set of resource lists * * Calls itself recursively for bridged devices. - * Returns 0 if success - * + * Returns 0 if success. */ static int configure_new_function(struct controller *ctrl, struct pci_func *func, u8 behind_bridge, diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index 027f6865d7e3..d7a293e3faf5 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -165,11 +165,11 @@ static void remove_slot(struct dummy_slot *dslot) } /** - * Rescan slot. - * Tries hard not to re-enable already existing devices - * also handles scanning of subfunctions + * pci_rescan_slot - Rescan slot + * @temp: Device template. Should be set: bus and devfn. * - * @param temp Device template. Should be set: bus and devfn. + * Tries hard not to re-enable already existing devices; + * also handles scanning of subfunctions. */ static void pci_rescan_slot(struct pci_dev *temp) { @@ -229,10 +229,10 @@ static void pci_rescan_slot(struct pci_dev *temp) /** - * Rescan PCI bus. - * call pci_rescan_slot for each possible function of the bus + * pci_rescan_bus - Rescan PCI bus + * @bus: the PCI bus to rescan * - * @param bus + * Call pci_rescan_slot for each possible function of the bus. */ static void pci_rescan_bus(const struct pci_bus *bus) { diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index c8cb49c5a752..f1e0966cee95 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -208,10 +208,10 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot) /** * board_added - Called after a board has been added to the system. + * @p_slot: &slot where board is added * - * Turns power on for the board - * Configures board - * + * Turns power on for the board. + * Configures board. */ static int board_added(struct slot *p_slot) { @@ -276,8 +276,8 @@ err_exit: } /** - * remove_board - Turns off slot and LED's - * + * remove_board - Turns off slot and LEDs + * @p_slot: slot where board is being removed */ static int remove_board(struct slot *p_slot) { @@ -319,11 +319,11 @@ struct power_work_info { }; /** - * pciehp_pushbutton_thread + * pciehp_power_thread - handle pushbutton events + * @work: &struct work_struct describing work to be done * - * Scheduled procedure to handle blocking stuff for the pushbuttons + * Scheduled procedure to handle blocking stuff for the pushbuttons. * Handles all pending events and exits. - * */ static void pciehp_power_thread(struct work_struct *work) { diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index deb6b5e35feb..b169b0e2647f 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -100,6 +100,7 @@ static struct device_node *find_dlpar_node(char *drc_name, int *node_type) /** * find_php_slot - return hotplug slot structure for device node + * @dn: target &device_node * * This routine will return the hotplug slot structure * for a given device node. Note that built-in PCI slots @@ -293,9 +294,8 @@ static int dlpar_add_vio_slot(char *drc_name, struct device_node *dn) * dlpar_add_slot - DLPAR add an I/O Slot * @drc_name: drc-name of newly added slot * - * Make the hotplug module and the kernel aware - * of a newly added I/O Slot. - * Return Codes - + * Make the hotplug module and the kernel aware of a newly added I/O Slot. + * Return Codes: * 0 Success * -ENODEV Not a valid drc_name * -EINVAL Slot already added @@ -339,9 +339,9 @@ exit: /** * dlpar_remove_vio_slot - DLPAR remove a virtual I/O Slot * @drc_name: drc-name of newly added slot + * @dn: &device_node * - * Remove the kernel and hotplug representations - * of an I/O Slot. + * Remove the kernel and hotplug representations of an I/O Slot. * Return Codes: * 0 Success * -EINVAL Vio dev doesn't exist @@ -359,11 +359,11 @@ static int dlpar_remove_vio_slot(char *drc_name, struct device_node *dn) } /** - * dlpar_remove_slot - DLPAR remove a PCI I/O Slot + * dlpar_remove_pci_slot - DLPAR remove a PCI I/O Slot * @drc_name: drc-name of newly added slot + * @dn: &device_node * - * Remove the kernel and hotplug representations - * of a PCI I/O Slot. + * Remove the kernel and hotplug representations of a PCI I/O Slot. * Return Codes: * 0 Success * -ENODEV Not a valid drc_name @@ -405,8 +405,7 @@ int dlpar_remove_pci_slot(char *drc_name, struct device_node *dn) * dlpar_remove_slot - DLPAR remove an I/O Slot * @drc_name: drc-name of newly added slot * - * Remove the kernel and hotplug representations - * of an I/O Slot. + * Remove the kernel and hotplug representations of an I/O Slot. * Return Codes: * 0 Success * -ENODEV Not a valid drc_name diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 458c08ef2654..58f1a9927709 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -54,10 +54,12 @@ module_param(debug, bool, 0644); /** * set_attention_status - set attention LED + * @hotplug_slot: target &hotplug_slot + * @value: LED control value + * * echo 0 > attention -- set LED OFF * echo 1 > attention -- set LED ON * echo 2 > attention -- set LED ID(identify, light is blinking) - * */ static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value) { @@ -99,6 +101,8 @@ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 * value) /** * get_attention_status - get attention LED status + * @hotplug_slot: slot to get status + * @value: pointer to store status */ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 * value) { @@ -254,6 +258,11 @@ static int is_php_type(char *drc_type) /** * is_php_dn() - return 1 if this is a hotpluggable pci slot, else 0 + * @dn: target &device_node + * @indexes: passed to get_children_props() + * @names: passed to get_children_props() + * @types: returned from get_children_props() + * @power_domains: * * This routine will return true only if the device node is * a hotpluggable slot. This routine will return false @@ -279,7 +288,7 @@ static int is_php_dn(struct device_node *dn, const int **indexes, /** * rpaphp_add_slot -- declare a hotplug slot to the hotplug subsystem. - * @dn device node of slot + * @dn: device node of slot * * This subroutine will register a hotplugable slot with the * PCI hotplug infrastructure. This routine is typicaly called @@ -291,7 +300,7 @@ static int is_php_dn(struct device_node *dn, const int **indexes, * routine will just return without doing anything, since embedded * slots cannot be hotplugged. * - * To remove a slot, it suffices to call rpaphp_deregister_slot() + * To remove a slot, it suffices to call rpaphp_deregister_slot(). */ int rpaphp_add_slot(struct device_node *dn) { diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c index 54ca8650d511..0de84533cd80 100644 --- a/drivers/pci/hotplug/rpaphp_pci.c +++ b/drivers/pci/hotplug/rpaphp_pci.c @@ -79,6 +79,7 @@ static void set_slot_name(struct slot *slot) /** * rpaphp_enable_slot - record slot state, config pci device + * @slot: target &slot * * Initialize values in the slot, and the hotplug_slot info * structures to indicate if there is a pci card plugged into diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index d2fc35598cdd..eb5cac6f08ae 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -231,10 +231,10 @@ static int fix_bus_speed(struct controller *ctrl, struct slot *pslot, /** * board_added - Called after a board has been added to the system. + * @p_slot: target &slot * - * Turns power on for the board - * Configures board - * + * Turns power on for the board. + * Configures board. */ static int board_added(struct slot *p_slot) { @@ -350,8 +350,8 @@ err_exit: /** - * remove_board - Turns off slot and LED's - * + * remove_board - Turns off slot and LEDs + * @p_slot: target &slot */ static int remove_board(struct slot *p_slot) { @@ -397,11 +397,11 @@ struct pushbutton_work_info { }; /** - * shpchp_pushbutton_thread + * shpchp_pushbutton_thread - handle pushbutton events + * @work: &struct work_struct to be handled * - * Scheduled procedure to handle blocking stuff for the pushbuttons + * Scheduled procedure to handle blocking stuff for the pushbuttons. * Handles all pending events and exits. - * */ static void shpchp_pushbutton_thread(struct work_struct *work) { diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 1b7b2812bf2d..7d1877341aad 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -702,8 +702,10 @@ static int __init pci_sysfs_init(void) sysfs_initialized = 1; for_each_pci_dev(pdev) { retval = pci_create_sysfs_dev_files(pdev); - if (retval) + if (retval) { + pci_dev_put(pdev); return retval; + } } return 0; diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 92a8469b21ba..3c0d8d138f5a 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -168,11 +168,11 @@ static int find_device_iter(struct device *device, void *data) /** * find_source_device - search through device hierarchy for source device - * @p_dev: pointer to Root Port pci_dev data structure + * @parent: pointer to Root Port pci_dev data structure * @id: device ID of agent who sends an error message to this Root Port * * Invoked when error is detected at the Root Port. - **/ + */ static struct device* find_source_device(struct pci_dev *parent, u16 id) { struct pci_dev *dev = parent; @@ -286,14 +286,15 @@ static void report_resume(struct pci_dev *dev, void *data) /** * broadcast_error_message - handle message broadcast to downstream drivers - * @device: pointer to from where in a hierarchy message is broadcasted down - * @api: callback to be broadcasted + * @dev: pointer to from where in a hierarchy message is broadcasted down * @state: error state + * @error_mesg: message to print + * @cb: callback to be broadcasted * * Invoked during error recovery process. Once being invoked, the content * of error severity will be broadcasted to all downstream drivers in a * hierarchy in question. - **/ + */ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev, enum pci_channel_state state, char *error_mesg, @@ -428,7 +429,7 @@ static pci_ers_result_t reset_link(struct pcie_device *aerdev, * Invoked when an error is nonfatal/fatal. Once being invoked, broadcast * error detected message to all downstream drivers within a hierarchy in * question and return the returned code. - **/ + */ static pci_ers_result_t do_recovery(struct pcie_device *aerdev, struct pci_dev *dev, int severity) @@ -488,7 +489,7 @@ static pci_ers_result_t do_recovery(struct pcie_device *aerdev, * @info: comprehensive error information * * Invoked when an error being detected by Root Port. - **/ + */ static void handle_error_source(struct pcie_device * aerdev, struct pci_dev *dev, struct aer_err_info info) @@ -521,7 +522,7 @@ static void handle_error_source(struct pcie_device * aerdev, * @rpc: pointer to a Root Port data structure * * Invoked when PCIE bus loads AER service driver. - **/ + */ void aer_enable_rootport(struct aer_rpc *rpc) { struct pci_dev *pdev = rpc->rpd->port; @@ -569,7 +570,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) * @rpc: pointer to a Root Port data structure * * Invoked when PCIE bus unloads AER service driver. - **/ + */ static void disable_root_aer(struct aer_rpc *rpc) { struct pci_dev *pdev = rpc->rpd->port; @@ -590,7 +591,7 @@ static void disable_root_aer(struct aer_rpc *rpc) * @rpc: pointer to the root port which holds an error * * Invoked by DPC handler to consume an error. - **/ + */ static struct aer_err_source* get_e_source(struct aer_rpc *rpc) { struct aer_err_source *e_source; @@ -655,7 +656,7 @@ static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info) * aer_isr_one_error - consume an error detected by root port * @p_device: pointer to error root port service device * @e_src: pointer to an error source - **/ + */ static void aer_isr_one_error(struct pcie_device *p_device, struct aer_err_source *e_src) { @@ -706,7 +707,7 @@ static void aer_isr_one_error(struct pcie_device *p_device, * @work: definition of this work item * * Invoked, as DPC, when root port records new detected error - **/ + */ void aer_isr(struct work_struct *work) { struct aer_rpc *rpc = container_of(work, struct aer_rpc, dpc_handler); @@ -729,7 +730,7 @@ void aer_isr(struct work_struct *work) * @rpc: pointer to a root port device being deleted * * Invoked when AER service unloaded on a specific Root Port - **/ + */ void aer_delete_rootport(struct aer_rpc *rpc) { /* Disable root port AER itself */ @@ -743,7 +744,7 @@ void aer_delete_rootport(struct aer_rpc *rpc) * @dev: pointer to AER pcie device * * Invoked when AER service driver is loaded. - **/ + */ int aer_init(struct pcie_device *dev) { if (aer_osc_setup(dev) && !forceload) diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index df383645e366..26057f98f72e 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -217,7 +217,7 @@ static int slot_reset_iter(struct device *device, void *data) static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev) { - pci_ers_result_t status; + pci_ers_result_t status = PCI_ERS_RESULT_NONE; int retval; /* If fatal, restore cfg space for possible link reset at upstream */ diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index cd0a204d96d1..3c5eb374adf8 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -75,6 +75,7 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_resource_table *res, { int i = 0; int irq; + int p, t; if (!valid_IRQ(gsi)) return; @@ -82,18 +83,27 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_resource_table *res, while (!(res->irq_resource[i].flags & IORESOURCE_UNSET) && i < PNP_MAX_IRQ) i++; - if (i >= PNP_MAX_IRQ) + if (i >= PNP_MAX_IRQ) { + printk(KERN_ERR "pnpacpi: exceeded the max number of IRQ " + "resources: %d \n", PNP_MAX_IRQ); return; - -#ifdef CONFIG_X86 - if (gsi < 16 && (triggering != ACPI_EDGE_SENSITIVE || - polarity != ACPI_ACTIVE_HIGH)) { - pnp_warn("BIOS BUG: legacy PNP IRQ %d should be edge trigger, " - "active high", gsi); - triggering = ACPI_EDGE_SENSITIVE; - polarity = ACPI_ACTIVE_HIGH; } -#endif + /* + * in IO-APIC mode, use overrided attribute. Two reasons: + * 1. BIOS bug in DSDT + * 2. BIOS uses IO-APIC mode Interrupt Source Override + */ + if (!acpi_get_override_irq(gsi, &t, &p)) { + t = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE; + p = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH; + + if (triggering != t || polarity != p) { + pnp_warn("IRQ %d override to %s, %s", + gsi, t ? "edge":"level", p ? "low":"high"); + triggering = t; + polarity = p; + } + } res->irq_resource[i].flags = IORESOURCE_IRQ; // Also clears _UNSET flag res->irq_resource[i].flags |= irq_flags(triggering, polarity); @@ -173,6 +183,9 @@ static void pnpacpi_parse_allocated_dmaresource(struct pnp_resource_table *res, } res->dma_resource[i].start = dma; res->dma_resource[i].end = dma; + } else { + printk(KERN_ERR "pnpacpi: exceeded the max number of DMA " + "resources: %d \n", PNP_MAX_DMA); } } @@ -194,6 +207,9 @@ static void pnpacpi_parse_allocated_ioresource(struct pnp_resource_table *res, } res->port_resource[i].start = io; res->port_resource[i].end = io + len - 1; + } else { + printk(KERN_ERR "pnpacpi: exceeded the max number of IO " + "resources: %d \n", PNP_MAX_PORT); } } @@ -217,6 +233,9 @@ static void pnpacpi_parse_allocated_memresource(struct pnp_resource_table *res, res->mem_resource[i].start = mem; res->mem_resource[i].end = mem + len - 1; + } else { + printk(KERN_ERR "pnpacpi: exceeded the max number of mem " + "resources: %d\n", PNP_MAX_MEM); } } diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index 41d73a5e9312..e50ebcffb962 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -367,8 +367,10 @@ int pnp_check_irq(struct pnp_dev *dev, int idx) { struct pci_dev *pci = NULL; for_each_pci_dev(pci) { - if (pci->irq == *irq) + if (pci->irq == *irq) { + pci_dev_put(pci); return 0; + } } } #endif diff --git a/drivers/ps3/Makefile b/drivers/ps3/Makefile index 746031de2195..1f5a2d33bf5b 100644 --- a/drivers/ps3/Makefile +++ b/drivers/ps3/Makefile @@ -1,6 +1,6 @@ -obj-$(CONFIG_PS3_VUART) += vuart.o +obj-$(CONFIG_PS3_VUART) += ps3-vuart.o obj-$(CONFIG_PS3_PS3AV) += ps3av_mod.o ps3av_mod-objs += ps3av.o ps3av_cmd.o obj-$(CONFIG_PPC_PS3) += sys-manager-core.o -obj-$(CONFIG_PS3_SYS_MANAGER) += sys-manager.o +obj-$(CONFIG_PS3_SYS_MANAGER) += ps3-sys-manager.o obj-$(CONFIG_PS3_STORAGE) += ps3stor_lib.o diff --git a/drivers/ps3/sys-manager.c b/drivers/ps3/ps3-sys-manager.c index 8461b08ab9fb..8461b08ab9fb 100644 --- a/drivers/ps3/sys-manager.c +++ b/drivers/ps3/ps3-sys-manager.c diff --git a/drivers/ps3/vuart.c b/drivers/ps3/ps3-vuart.c index 9dea585ef806..9dea585ef806 100644 --- a/drivers/ps3/vuart.c +++ b/drivers/ps3/ps3-vuart.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index e5cdc0294aaa..1e6715ec51ef 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -447,7 +447,7 @@ config RTC_DRV_AT91RM9200 config RTC_DRV_BFIN tristate "Blackfin On-Chip RTC" - depends on BFIN + depends on BLACKFIN help If you say yes here you will get support for the Blackfin On-Chip Real Time Clock. diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index de0da545c7a1..a4f56e95cf96 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -293,7 +293,7 @@ int rtc_irq_register(struct rtc_device *rtc, struct rtc_task *task) return -EINVAL; /* Cannot register while the char dev is in use */ - if (!(mutex_trylock(&rtc->char_lock))) + if (test_and_set_bit(RTC_DEV_BUSY, &rtc->flags)) return -EBUSY; spin_lock_irq(&rtc->irq_task_lock); @@ -303,7 +303,7 @@ int rtc_irq_register(struct rtc_device *rtc, struct rtc_task *task) } spin_unlock_irq(&rtc->irq_task_lock); - mutex_unlock(&rtc->char_lock); + clear_bit(RTC_DEV_BUSY, &rtc->flags); return retval; } diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index 814583bd2fe7..ae1bf177d625 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -26,10 +26,7 @@ static int rtc_dev_open(struct inode *inode, struct file *file) struct rtc_device, char_dev); const struct rtc_class_ops *ops = rtc->ops; - /* We keep the lock as long as the device is in use - * and return immediately if busy - */ - if (!(mutex_trylock(&rtc->char_lock))) + if (test_and_set_bit(RTC_DEV_BUSY, &rtc->flags)) return -EBUSY; file->private_data = rtc; @@ -43,8 +40,8 @@ static int rtc_dev_open(struct inode *inode, struct file *file) return 0; } - /* something has gone wrong, release the lock */ - mutex_unlock(&rtc->char_lock); + /* something has gone wrong */ + clear_bit(RTC_DEV_BUSY, &rtc->flags); return err; } @@ -405,7 +402,7 @@ static int rtc_dev_release(struct inode *inode, struct file *file) if (rtc->ops->release) rtc->ops->release(rtc->dev.parent); - mutex_unlock(&rtc->char_lock); + clear_bit(RTC_DEV_BUSY, &rtc->flags); return 0; } @@ -440,7 +437,6 @@ void rtc_dev_prepare(struct rtc_device *rtc) rtc->dev.devt = MKDEV(MAJOR(rtc_devt), rtc->id); - mutex_init(&rtc->char_lock); #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL INIT_WORK(&rtc->uie_task, rtc_uie_task); setup_timer(&rtc->uie_timer, rtc_uie_timer, (unsigned long)rtc); diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 838f7ac0dc32..6db31089d2d7 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -483,7 +483,7 @@ static DECLARE_WORK(css_reprobe_work, reprobe_all); void css_schedule_reprobe(void) { need_reprobe = 1; - queue_work(ccw_device_work, &css_reprobe_work); + queue_work(slow_path_wq, &css_reprobe_work); } EXPORT_SYMBOL_GPL(css_schedule_reprobe); diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 8867443b8060..bfad421cda66 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -1034,7 +1034,7 @@ device_trigger_reprobe(struct subchannel *sch) if (sch->schib.pmcw.dev != cdev->private->dev_id.devno) { PREPARE_WORK(&cdev->private->kick_work, ccw_device_move_to_orphanage); - queue_work(ccw_device_work, &cdev->private->kick_work); + queue_work(slow_path_wq, &cdev->private->kick_work); } else ccw_device_start_id(cdev, 0); } diff --git a/drivers/s390/cio/device_id.c b/drivers/s390/cio/device_id.c index f232832f2b22..2f6bf462425e 100644 --- a/drivers/s390/cio/device_id.c +++ b/drivers/s390/cio/device_id.c @@ -113,19 +113,10 @@ __ccw_device_sense_id_start(struct ccw_device *cdev) { struct subchannel *sch; struct ccw1 *ccw; - int ret; sch = to_subchannel(cdev->dev.parent); /* Setup sense channel program. */ ccw = cdev->private->iccws; - if (sch->schib.pmcw.pim != 0x80) { - /* more than one path installed. */ - ccw->cmd_code = CCW_CMD_SUSPEND_RECONN; - ccw->cda = 0; - ccw->count = 0; - ccw->flags = CCW_FLAG_SLI | CCW_FLAG_CC; - ccw++; - } ccw->cmd_code = CCW_CMD_SENSE_ID; ccw->cda = (__u32) __pa (&cdev->private->senseid); ccw->count = sizeof (struct senseid); @@ -133,25 +124,9 @@ __ccw_device_sense_id_start(struct ccw_device *cdev) /* Reset device status. */ memset(&cdev->private->irb, 0, sizeof(struct irb)); + cdev->private->flags.intretry = 0; - /* Try on every path. */ - ret = -ENODEV; - while (cdev->private->imask != 0) { - if ((sch->opm & cdev->private->imask) != 0 && - cdev->private->iretry > 0) { - cdev->private->iretry--; - /* Reset internal retry indication. */ - cdev->private->flags.intretry = 0; - ret = cio_start (sch, cdev->private->iccws, - cdev->private->imask); - /* ret is 0, -EBUSY, -EACCES or -ENODEV */ - if (ret != -EACCES) - return ret; - } - cdev->private->imask >>= 1; - cdev->private->iretry = 5; - } - return ret; + return cio_start(sch, ccw, LPM_ANYPATH); } void @@ -161,8 +136,7 @@ ccw_device_sense_id_start(struct ccw_device *cdev) memset (&cdev->private->senseid, 0, sizeof (struct senseid)); cdev->private->senseid.cu_type = 0xFFFF; - cdev->private->imask = 0x80; - cdev->private->iretry = 5; + cdev->private->iretry = 3; ret = __ccw_device_sense_id_start(cdev); if (ret && ret != -EBUSY) ccw_device_sense_id_done(cdev, ret); @@ -278,14 +252,13 @@ ccw_device_sense_id_irq(struct ccw_device *cdev, enum dev_event dev_event) ccw_device_sense_id_done(cdev, ret); break; case -EACCES: /* channel is not operational. */ - sch->lpm &= ~cdev->private->imask; - cdev->private->imask >>= 1; - cdev->private->iretry = 5; - /* fall through. */ case -EAGAIN: /* try again. */ - ret = __ccw_device_sense_id_start(cdev); - if (ret == 0 || ret == -EBUSY) - break; + cdev->private->iretry--; + if (cdev->private->iretry > 0) { + ret = __ccw_device_sense_id_start(cdev); + if (ret == 0 || ret == -EBUSY) + break; + } /* fall through. */ default: /* Sense ID failed. Try asking VM. */ if (MACHINE_IS_VM) { diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 8d0244c2e7d4..7a835a35f21d 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -242,16 +242,6 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign } } -static void hexdump(u8 *x, int len) -{ - int i; - - printk("[ "); - for (i = 0; i < len; i++) - printk("%x ", x[i]); - printk("]\n"); -} - static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); @@ -282,7 +272,8 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd; if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: queue cmd = ", drive->name); - hexdump(pc->c, 6); + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, pc->c, + 6, 0); } rq->rq_disk = scsi->disk; return ide_do_drive_cmd(drive, rq, ide_preempt); @@ -337,7 +328,8 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer; if (log) { printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number); - hexdump(pc->buffer,16); + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, + pc->buffer, 16, 0); } memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE); kfree(pc->buffer); @@ -816,10 +808,12 @@ static int idescsi_queue (struct scsi_cmnd *cmd, if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number); - hexdump(cmd->cmnd, cmd->cmd_len); + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, + cmd->cmnd, cmd->cmd_len, 0); if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) { printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number); - hexdump(pc->c, 12); + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, + pc->c, 12, 0); } } diff --git a/drivers/scsi/zorro7xx.c b/drivers/scsi/zorro7xx.c index ac67394c7373..64d40a2d4d4d 100644 --- a/drivers/scsi/zorro7xx.c +++ b/drivers/scsi/zorro7xx.c @@ -13,7 +13,10 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/zorro.h> + +#include <asm/amigahw.h> #include <asm/amigaints.h> + #include <scsi/scsi_host.h> #include <scsi/scsi_transport_spi.h> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index ed438bc7e98d..d7e1996e2fec 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -600,7 +600,7 @@ config SERIAL_SA1100_CONSOLE config SERIAL_BFIN tristate "Blackfin serial port support" - depends on BFIN + depends on BLACKFIN select SERIAL_CORE select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) help diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index f3257f708ef9..9c95bc0398ad 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -45,8 +45,6 @@ #include "ip22zilog.h" -void ip22_do_break(void); - /* * On IP22 we need to delay after register accesses but we do not need to * flush writes. @@ -81,12 +79,9 @@ struct uart_ip22zilog_port { #define IP22ZILOG_FLAG_REGS_HELD 0x00000040 #define IP22ZILOG_FLAG_TX_STOPPED 0x00000080 #define IP22ZILOG_FLAG_TX_ACTIVE 0x00000100 +#define IP22ZILOG_FLAG_RESET_DONE 0x00000200 - unsigned int cflag; - - /* L1-A keyboard break state. */ - int kbd_id; - int l1_down; + unsigned int tty_break; unsigned char parity_mask; unsigned char prev_status; @@ -250,13 +245,26 @@ static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up, } } -static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up, - struct zilog_channel *channel) +#define Rx_BRK 0x0100 /* BREAK event software flag. */ +#define Rx_SYS 0x0200 /* SysRq event software flag. */ + +static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) { - struct tty_struct *tty = up->port.info->tty; /* XXX info==NULL? */ + struct tty_struct *tty; + unsigned char ch, flag; + unsigned int r1; + + tty = NULL; + if (up->port.info != NULL && + up->port.info->tty != NULL) + tty = up->port.info->tty; - while (1) { - unsigned char ch, r1, flag; + for (;;) { + ch = readb(&channel->control); + ZSDELAY(); + if (!(ch & Rx_CH_AV)) + break; r1 = read_zsreg(channel, R1); if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { @@ -265,43 +273,26 @@ static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up, ZS_WSYNC(channel); } - ch = readb(&channel->control); - ZSDELAY(); - - /* This funny hack depends upon BRK_ABRT not interfering - * with the other bits we care about in R1. - */ - if (ch & BRK_ABRT) - r1 |= BRK_ABRT; - ch = readb(&channel->data); ZSDELAY(); ch &= up->parity_mask; - if (ZS_IS_CONS(up) && (r1 & BRK_ABRT)) { - /* Wait for BREAK to deassert to avoid potentially - * confusing the PROM. - */ - while (1) { - ch = readb(&channel->control); - ZSDELAY(); - if (!(ch & BRK_ABRT)) - break; - } - ip22_do_break(); - return; - } + /* Handle the null char got when BREAK is removed. */ + if (!ch) + r1 |= up->tty_break; /* A real serial line, record the character and status. */ flag = TTY_NORMAL; up->port.icount.rx++; - if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) { - if (r1 & BRK_ABRT) { - r1 &= ~(PAR_ERR | CRC_ERR); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | Rx_SYS | Rx_BRK)) { + up->tty_break = 0; + + if (r1 & (Rx_SYS | Rx_BRK)) { up->port.icount.brk++; - if (uart_handle_break(&up->port)) - goto next_char; + if (r1 & Rx_SYS) + continue; + r1 &= ~(PAR_ERR | CRC_ERR); } else if (r1 & PAR_ERR) up->port.icount.parity++; @@ -310,30 +301,21 @@ static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up, if (r1 & Rx_OVR) up->port.icount.overrun++; r1 &= up->port.read_status_mask; - if (r1 & BRK_ABRT) + if (r1 & Rx_BRK) flag = TTY_BREAK; else if (r1 & PAR_ERR) flag = TTY_PARITY; else if (r1 & CRC_ERR) flag = TTY_FRAME; } - if (uart_handle_sysrq_char(&up->port, ch)) - goto next_char; - if (up->port.ignore_status_mask == 0xff || - (r1 & up->port.ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); + if (uart_handle_sysrq_char(&up->port, ch)) + continue; - if (r1 & Rx_OVR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - next_char: - ch = readb(&channel->control); - ZSDELAY(); - if (!(ch & Rx_CH_AV)) - break; + if (tty) + uart_insert_char(&up->port, r1, Rx_OVR, ch, flag); } - - tty_flip_buffer_push(tty); + return tty; } static void ip22zilog_status_handle(struct uart_ip22zilog_port *up, @@ -348,6 +330,15 @@ static void ip22zilog_status_handle(struct uart_ip22zilog_port *up, ZSDELAY(); ZS_WSYNC(channel); + if (up->curregs[R15] & BRKIE) { + if ((status & BRK_ABRT) && !(up->prev_status & BRK_ABRT)) { + if (uart_handle_break(&up->port)) + up->tty_break = Rx_SYS; + else + up->tty_break = Rx_BRK; + } + } + if (ZS_WANTS_MODEM_STATUS(up)) { if (status & SYNC) up->port.icount.dsr++; @@ -356,10 +347,10 @@ static void ip22zilog_status_handle(struct uart_ip22zilog_port *up, * But it does not tell us which bit has changed, we have to keep * track of this ourselves. */ - if ((status & DCD) ^ up->prev_status) + if ((status ^ up->prev_status) ^ DCD) uart_handle_dcd_change(&up->port, (status & DCD)); - if ((status & CTS) ^ up->prev_status) + if ((status ^ up->prev_status) ^ CTS) uart_handle_cts_change(&up->port, (status & CTS)); @@ -447,19 +438,21 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id) while (up) { struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + struct tty_struct *tty; unsigned char r3; spin_lock(&up->port.lock); r3 = read_zsreg(channel, R3); /* Channel A */ + tty = NULL; if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { writeb(RES_H_IUS, &channel->control); ZSDELAY(); ZS_WSYNC(channel); if (r3 & CHARxIP) - ip22zilog_receive_chars(up, channel); + tty = ip22zilog_receive_chars(up, channel); if (r3 & CHAEXT) ip22zilog_status_handle(up, channel); if (r3 & CHATxIP) @@ -467,18 +460,22 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id) } spin_unlock(&up->port.lock); + if (tty) + tty_flip_buffer_push(tty); + /* Channel B */ up = up->next; channel = ZILOG_CHANNEL_FROM_PORT(&up->port); spin_lock(&up->port.lock); + tty = NULL; if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { writeb(RES_H_IUS, &channel->control); ZSDELAY(); ZS_WSYNC(channel); if (r3 & CHBRxIP) - ip22zilog_receive_chars(up, channel); + tty = ip22zilog_receive_chars(up, channel); if (r3 & CHBEXT) ip22zilog_status_handle(up, channel); if (r3 & CHBTxIP) @@ -486,6 +483,9 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id) } spin_unlock(&up->port.lock); + if (tty) + tty_flip_buffer_push(tty); + up = up->next; } @@ -681,11 +681,46 @@ static void ip22zilog_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&port->lock, flags); } +static void __ip22zilog_reset(struct uart_ip22zilog_port *up) +{ + struct zilog_channel *channel; + int i; + + if (up->flags & IP22ZILOG_FLAG_RESET_DONE) + return; + + /* Let pending transmits finish. */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + if (!ZS_IS_CHANNEL_A(up)) { + up++; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + } + write_zsreg(channel, R9, FHWRES); + ZSDELAY_LONG(); + (void) read_zsreg(channel, R0); + + up->flags |= IP22ZILOG_FLAG_RESET_DONE; + up->next->flags |= IP22ZILOG_FLAG_RESET_DONE; +} + static void __ip22zilog_startup(struct uart_ip22zilog_port *up) { struct zilog_channel *channel; channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + __ip22zilog_reset(up); + + __load_zsregs(channel, up->curregs); + /* set master interrupt enable */ + write_zsreg(channel, R9, up->curregs[R9]); up->prev_status = readb(&channel->control); /* Enable receiver and transmitter. */ @@ -859,8 +894,6 @@ ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios, else up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS; - up->cflag = termios->c_cflag; - ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); uart_update_timeout(port, termios->c_cflag, baud); @@ -992,74 +1025,29 @@ ip22zilog_console_write(struct console *con, const char *s, unsigned int count) spin_unlock_irqrestore(&up->port.lock, flags); } -void -ip22serial_console_termios(struct console *con, char *options) -{ - int baud = 9600, bits = 8, cflag; - int parity = 'n'; - int flow = 'n'; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - cflag = CREAD | HUPCL | CLOCAL; - - switch (baud) { - case 150: cflag |= B150; break; - case 300: cflag |= B300; break; - case 600: cflag |= B600; break; - case 1200: cflag |= B1200; break; - case 2400: cflag |= B2400; break; - case 4800: cflag |= B4800; break; - case 9600: cflag |= B9600; break; - case 19200: cflag |= B19200; break; - case 38400: cflag |= B38400; break; - default: baud = 9600; cflag |= B9600; break; - } - - con->cflag = cflag | CS8; /* 8N1 */ - - uart_update_timeout(&ip22zilog_port_table[con->index].port, cflag, baud); -} - static int __init ip22zilog_console_setup(struct console *con, char *options) { struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; unsigned long flags; - int baud, brg; - - printk("Console: ttyS%d (IP22-Zilog)\n", con->index); + int baud = 9600, bits = 8; + int parity = 'n'; + int flow = 'n'; - /* Get firmware console settings. */ - ip22serial_console_termios(con, options); + up->flags |= IP22ZILOG_FLAG_IS_CONS; - /* Firmware console speed is limited to 150-->38400 baud so - * this hackish cflag thing is OK. - */ - switch (con->cflag & CBAUD) { - case B150: baud = 150; break; - case B300: baud = 300; break; - case B600: baud = 600; break; - case B1200: baud = 1200; break; - case B2400: baud = 2400; break; - case B4800: baud = 4800; break; - default: case B9600: baud = 9600; break; - case B19200: baud = 19200; break; - case B38400: baud = 38400; break; - }; - - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + printk(KERN_INFO "Console: ttyS%d (IP22-Zilog)\n", con->index); spin_lock_irqsave(&up->port.lock, flags); - up->curregs[R15] = BRKIE; - ip22zilog_convert_to_zs(up, con->cflag, 0, brg); + up->curregs[R15] |= BRKIE; __ip22zilog_startup(up); spin_unlock_irqrestore(&up->port.lock, flags); - return 0; + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(&up->port, con, baud, parity, bits, flow); } static struct uart_driver ip22zilog_reg; @@ -1140,25 +1128,10 @@ static void __init ip22zilog_prepare(void) up[(chip * 2) + 1].port.line = (chip * 2) + 1; up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; } -} - -static void __init ip22zilog_init_hw(void) -{ - int i; - - for (i = 0; i < NUM_CHANNELS; i++) { - struct uart_ip22zilog_port *up = &ip22zilog_port_table[i]; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - unsigned long flags; - int baud, brg; - spin_lock_irqsave(&up->port.lock, flags); - - if (ZS_IS_CHANNEL_A(up)) { - write_zsreg(channel, R9, FHWRES); - ZSDELAY_LONG(); - (void) read_zsreg(channel, R0); - } + for (channel = 0; channel < NUM_CHANNELS; channel++) { + struct uart_ip22zilog_port *up = &ip22zilog_port_table[channel]; + int brg; /* Normal serial TTY. */ up->parity_mask = 0xff; @@ -1169,16 +1142,10 @@ static void __init ip22zilog_init_hw(void) up->curregs[R9] = NV | MIE; up->curregs[R10] = NRZ; up->curregs[R11] = TCBR | RCBR; - baud = 9600; - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + brg = BPS_TO_BRG(9600, ZS_CLOCK / ZS_CLOCK_DIVISOR); up->curregs[R12] = (brg & 0xff); up->curregs[R13] = (brg >> 8) & 0xff; up->curregs[R14] = BRENAB; - __load_zsregs(channel, up->curregs); - /* set master interrupt enable */ - write_zsreg(channel, R9, up->curregs[R9]); - - spin_unlock_irqrestore(&up->port.lock, flags); } } @@ -1195,8 +1162,6 @@ static int __init ip22zilog_ports_init(void) panic("IP22-Zilog: Unable to register zs interrupt handler.\n"); } - ip22zilog_init_hw(); - ret = uart_register_driver(&ip22zilog_reg); if (ret == 0) { int i; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a77ede598d34..abf05048c638 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -61,7 +61,7 @@ config SPI_ATMEL config SPI_BFIN tristate "SPI controller driver for ADI Blackfin5xx" - depends on SPI_MASTER && BFIN + depends on SPI_MASTER && BLACKFIN help This is the SPI controller master driver for Blackfin 5xx processor. diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 0d342dcdd302..ff6a14bf1280 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -497,7 +497,7 @@ static int atmel_spi_setup(struct spi_device *spi) /* chipselect must have been muxed as GPIO (e.g. in board setup) */ npcs_pin = (unsigned int)spi->controller_data; if (!spi->controller_state) { - ret = gpio_request(npcs_pin, "spi_npcs"); + ret = gpio_request(npcs_pin, spi->dev.bus_id); if (ret) return ret; spi->controller_state = (void *)npcs_pin; diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c index 0fa25e2e80fe..109d82c1abc0 100644 --- a/drivers/spi/spi_s3c24xx_gpio.c +++ b/drivers/spi/spi_s3c24xx_gpio.c @@ -96,6 +96,7 @@ static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value) static int s3c2410_spigpio_probe(struct platform_device *dev) { + struct s3c2410_spigpio_info *info; struct spi_master *master; struct s3c2410_spigpio *sp; int ret; @@ -113,10 +114,11 @@ static int s3c2410_spigpio_probe(struct platform_device *dev) platform_set_drvdata(dev, sp); /* copy in the plkatform data */ - sp->info = dev->dev.platform_data; + info = sp->info = dev->dev.platform_data; /* setup spi bitbang adaptor */ sp->bitbang.master = spi_master_get(master); + sp->bitbang.master->bus_num = info->bus_num; sp->bitbang.chipselect = s3c2410_spigpio_chipselect; sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0; @@ -124,13 +126,18 @@ static int s3c2410_spigpio_probe(struct platform_device *dev) sp->bitbang.txrx_word[SPI_MODE_2] = s3c2410_spigpio_txrx_mode2; sp->bitbang.txrx_word[SPI_MODE_3] = s3c2410_spigpio_txrx_mode3; - /* set state of spi pins */ - s3c2410_gpio_setpin(sp->info->pin_clk, 0); - s3c2410_gpio_setpin(sp->info->pin_mosi, 0); + /* set state of spi pins, always assume that the clock is + * available, but do check the MOSI and MISO. */ + s3c2410_gpio_setpin(info->pin_clk, 0); + s3c2410_gpio_cfgpin(info->pin_clk, S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(sp->info->pin_clk, S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(sp->info->pin_mosi, S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(sp->info->pin_miso, S3C2410_GPIO_INPUT); + if (info->pin_mosi < S3C2410_GPH10) { + s3c2410_gpio_setpin(info->pin_mosi, 0); + s3c2410_gpio_cfgpin(info->pin_mosi, S3C2410_GPIO_OUTPUT); + } + + if (info->pin_miso != S3C2410_GPA0 && info->pin_miso < S3C2410_GPH10) + s3c2410_gpio_cfgpin(info->pin_miso, S3C2410_GPIO_INPUT); ret = spi_bitbang_start(&sp->bitbang); if (ret) diff --git a/drivers/usb/README b/drivers/usb/README index 3c8434128554..284f46b3e1cc 100644 --- a/drivers/usb/README +++ b/drivers/usb/README @@ -39,12 +39,12 @@ first subdirectory in the list below that it fits into. image/ - This is for still image drivers, like scanners or digital cameras. -input/ - This is for any driver that uses the input subsystem, +../input/ - This is for any driver that uses the input subsystem, like keyboard, mice, touchscreens, tablets, etc. -media/ - This is for multimedia drivers, like video cameras, +../media/ - This is for multimedia drivers, like video cameras, radios, and any other drivers that talk to the v4l subsystem. -net/ - This is for network drivers. +../net/ - This is for network drivers. serial/ - This is for USB to serial drivers. storage/ - This is for USB mass-storage drivers. class/ - This is for all USB device drivers that do not fit diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 8586817698ad..c51f8e9312e0 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -585,9 +585,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) { struct usb_device *usb_dev; - if (!dev) - return -ENODEV; - /* driver is often null here; dev_dbg() would oops */ pr_debug ("usb %s: uevent\n", dev->bus_id); @@ -631,14 +628,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) usb_dev->descriptor.bDeviceProtocol)) return -ENOMEM; - if (add_uevent_var(env, "BUSNUM=%03d", - usb_dev->bus->busnum)) - return -ENOMEM; - - if (add_uevent_var(env, "DEVNUM=%03d", - usb_dev->devnum)) - return -ENOMEM; - return 0; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index fea8256a18d6..d5ed3fa9e304 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1311,8 +1311,8 @@ void usb_hcd_flush_endpoint(struct usb_device *udev, hcd = bus_to_hcd(udev->bus); /* No more submits can occur */ -rescan: spin_lock_irq(&hcd_urb_list_lock); +rescan: list_for_each_entry (urb, &ep->urb_list, urb_list) { int is_in; @@ -1345,6 +1345,7 @@ rescan: usb_put_urb (urb); /* list contents may have changed */ + spin_lock(&hcd_urb_list_lock); goto rescan; } spin_unlock_irq(&hcd_urb_list_lock); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 036c3dea855e..13b326a13377 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -335,7 +335,7 @@ static void kick_khubd(struct usb_hub *hub) to_usb_interface(hub->intfdev)->pm_usage_cnt = 1; spin_lock_irqsave(&hub_event_lock, flags); - if (!hub->disconnected & list_empty(&hub->event_list)) { + if (!hub->disconnected && list_empty(&hub->event_list)) { list_add_tail(&hub->event_list, &hub_event_list); wake_up(&khubd_wait); } diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 316a746e0080..fcd40ecbeecc 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1172,7 +1172,6 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) struct usb_host_interface *alt; int ret; int manual = 0; - int changed; if (dev->state == USB_STATE_SUSPENDED) return -EHOSTUNREACH; @@ -1212,8 +1211,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) */ /* prevent submissions using previous endpoint settings */ - changed = (iface->cur_altsetting != alt); - if (changed && device_is_registered(&iface->dev)) + if (iface->cur_altsetting != alt && device_is_registered(&iface->dev)) usb_remove_sysfs_intf_files(iface); usb_disable_interface(dev, iface); @@ -1250,7 +1248,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) * (Likewise, EP0 never "halts" on well designed devices.) */ usb_enable_interface(dev, iface); - if (changed && device_is_registered(&iface->dev)) + if (device_is_registered(&iface->dev)) usb_create_sysfs_intf_files(iface); return 0; @@ -1348,34 +1346,10 @@ static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env) struct usb_interface *intf; struct usb_host_interface *alt; - if (!dev) - return -ENODEV; - - /* driver is often null here; dev_dbg() would oops */ - pr_debug ("usb %s: uevent\n", dev->bus_id); - intf = to_usb_interface(dev); usb_dev = interface_to_usbdev(intf); alt = intf->cur_altsetting; -#ifdef CONFIG_USB_DEVICEFS - if (add_uevent_var(env, "DEVICE=/proc/bus/usb/%03d/%03d", - usb_dev->bus->busnum, usb_dev->devnum)) - return -ENOMEM; -#endif - - if (add_uevent_var(env, "PRODUCT=%x/%x/%x", - le16_to_cpu(usb_dev->descriptor.idVendor), - le16_to_cpu(usb_dev->descriptor.idProduct), - le16_to_cpu(usb_dev->descriptor.bcdDevice))) - return -ENOMEM; - - if (add_uevent_var(env, "TYPE=%d/%d/%d", - usb_dev->descriptor.bDeviceClass, - usb_dev->descriptor.bDeviceSubClass, - usb_dev->descriptor.bDeviceProtocol)) - return -ENOMEM; - if (add_uevent_var(env, "INTERFACE=%d/%d/%d", alt->desc.bInterfaceClass, alt->desc.bInterfaceSubClass, @@ -1641,12 +1615,6 @@ free_interfaces: intf->dev.bus_id, ret); continue; } - - /* The driver's probe method can call usb_set_interface(), - * which would mean the interface's sysfs files are already - * created. Just in case, we'll remove them first. - */ - usb_remove_sysfs_intf_files(intf); usb_create_sysfs_intf_files(intf); } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index b04afd06e502..32bd130b1eed 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -735,6 +735,8 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf) struct usb_host_interface *alt = intf->cur_altsetting; int retval; + if (intf->sysfs_files_created) + return 0; retval = sysfs_create_group(&dev->kobj, &intf_attr_grp); if (retval) return retval; @@ -746,6 +748,7 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf) if (intf->intf_assoc) retval = sysfs_create_group(&dev->kobj, &intf_assoc_attr_grp); usb_create_intf_ep_files(intf, udev); + intf->sysfs_files_created = 1; return 0; } @@ -753,8 +756,11 @@ void usb_remove_sysfs_intf_files(struct usb_interface *intf) { struct device *dev = &intf->dev; + if (!intf->sysfs_files_created) + return; usb_remove_intf_ep_files(intf); device_remove_file(dev, &dev_attr_interface); sysfs_remove_group(&dev->kobj, &intf_attr_grp); sysfs_remove_group(&intf->dev.kobj, &intf_assoc_attr_grp); + intf->sysfs_files_created = 0; } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index c4a6f1095b8b..8f142370103d 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -192,9 +192,34 @@ static void usb_release_dev(struct device *dev) kfree(udev); } +#ifdef CONFIG_HOTPLUG +static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct usb_device *usb_dev; + + usb_dev = to_usb_device(dev); + + if (add_uevent_var(env, "BUSNUM=%03d", usb_dev->bus->busnum)) + return -ENOMEM; + + if (add_uevent_var(env, "DEVNUM=%03d", usb_dev->devnum)) + return -ENOMEM; + + return 0; +} + +#else + +static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + return -ENODEV; +} +#endif /* CONFIG_HOTPLUG */ + struct device_type usb_device_type = { .name = "usb_device", .release = usb_release_dev, + .uevent = usb_dev_uevent, }; #ifdef CONFIG_PM diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 87c4f50dfb61..d377154658b5 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -1241,14 +1241,14 @@ static void pullup_enable(struct omap_udc *udc) udc->gadget.dev.parent->power.power_state = PMSG_ON; udc->gadget.dev.power.power_state = PMSG_ON; UDC_SYSCON1_REG |= UDC_PULLUP_EN; - if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx()) + if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx()) OTG_CTRL_REG |= OTG_BSESSVLD; UDC_IRQ_EN_REG = UDC_DS_CHG_IE; } static void pullup_disable(struct omap_udc *udc) { - if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx()) + if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx()) OTG_CTRL_REG &= ~OTG_BSESSVLD; UDC_IRQ_EN_REG = UDC_DS_CHG_IE; UDC_SYSCON1_REG &= ~UDC_PULLUP_EN; @@ -1386,7 +1386,7 @@ static void update_otg(struct omap_udc *udc) { u16 devstat; - if (!gadget_is_otg(udc->gadget)) + if (!gadget_is_otg(&udc->gadget)) return; if (OTG_CTRL_REG & OTG_ID) diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index e3e90f8a75e7..4ce050c3d13f 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -52,10 +52,10 @@ #include <asm/arch/irqs.h> #include <asm/arch/hardware.h> -#include <asm/arch/regs-clock.h> #include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-udc.h> -#include <asm/arch/udc.h> + +#include <asm/plat-s3c24xx/regs-udc.h> +#include <asm/plat-s3c24xx/udc.h> #include <asm/mach-types.h> @@ -1511,7 +1511,11 @@ static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev) unsigned int value; dprintk(DEBUG_NORMAL, "%s()\n", __func__); + + /* some cpus cannot read from an line configured to IRQ! */ + s3c2410_gpio_cfgpin(udc_info->vbus_pin, S3C2410_GPIO_INPUT); value = s3c2410_gpio_getpin(udc_info->vbus_pin); + s3c2410_gpio_cfgpin(udc_info->vbus_pin, S3C2410_GPIO_SFN2); if (udc_info->vbus_pin_inverted) value = !value; @@ -1872,9 +1876,9 @@ static int s3c2410_udc_probe(struct platform_device *pdev) if (udc_info && udc_info->vbus_pin > 0) { irq = s3c2410_gpio_getirq(udc_info->vbus_pin); retval = request_irq(irq, s3c2410_udc_vbus_irq, - IRQF_DISABLED | IRQF_TRIGGER_RISING - | IRQF_TRIGGER_FALLING, - gadget_name, udc); + IRQF_DISABLED | IRQF_TRIGGER_RISING + | IRQF_TRIGGER_FALLING | IRQF_SHARED, + gadget_name, udc); if (retval != 0) { dev_err(dev, "can't get vbus irq %i, err %d\n", diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 177e78ed241b..49a91c5ee51b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -156,7 +156,7 @@ config USB_OHCI_HCD_PCI config USB_OHCI_HCD_SSB bool "OHCI support for Broadcom SSB OHCI core" - depends on USB_OHCI_HCD && (SSB = y || SSB = CONFIG_USB_OHCI_HCD) && EXPERIMENTAL + depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL default n ---help--- Support for the Sonics Silicon Backplane (SSB) attached diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index c1514442883e..5f2d74ed5ad7 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -575,12 +575,15 @@ static int ehci_run (struct usb_hcd *hcd) * from the companions to the EHCI controller. If any of the * companions are in the middle of a port reset at the time, it * could cause trouble. Write-locking ehci_cf_port_reset_rwsem - * guarantees that no resets are in progress. + * guarantees that no resets are in progress. After we set CF, + * a short delay lets the hardware catch up; new resets shouldn't + * be started before the port switching actions could complete. */ down_write(&ehci_cf_port_reset_rwsem); hcd->state = HC_STATE_RUNNING; ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ + msleep(5); up_write(&ehci_cf_port_reset_rwsem); temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase)); diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 91e999c9f680..bc207e3c21f5 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -819,7 +819,7 @@ static int mts_usb_probe(struct usb_interface *intf, goto out_kfree2; new_desc->host->hostdata[0] = (unsigned long)new_desc; - if (scsi_add_host(new_desc->host, NULL)) { + if (scsi_add_host(new_desc->host, &dev->dev)) { err_retval = -EIO; goto out_host_put; } diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index c567aa7a41ea..5a2c44e4c1f7 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -79,12 +79,22 @@ MODULE_DEVICE_TABLE(usb, device_table); #define COMMAND_TIMEOUT (2*HZ) /* 60 second timeout for a command */ +/* + * The locking scheme is a vanilla 3-lock: + * adu_device.buflock: A spinlock, covers what IRQs touch. + * adutux_mutex: A Static lock to cover open_count. It would also cover + * any globals, but we don't have them in 2.6. + * adu_device.mtx: A mutex to hold across sleepers like copy_from_user. + * It covers all of adu_device, except the open_count + * and what .buflock covers. + */ + /* Structure to hold all of our device specific stuff */ struct adu_device { - struct mutex mtx; /* locks this structure */ + struct mutex mtx; struct usb_device* udev; /* save off the usb device pointer */ struct usb_interface* interface; - unsigned char minor; /* the starting minor number for this device */ + unsigned int minor; /* the starting minor number for this device */ char serial_number[8]; int open_count; /* number of times this port has been opened */ @@ -107,8 +117,11 @@ struct adu_device { char* interrupt_out_buffer; struct usb_endpoint_descriptor* interrupt_out_endpoint; struct urb* interrupt_out_urb; + int out_urb_finished; }; +static DEFINE_MUTEX(adutux_mutex); + static struct usb_driver adu_driver; static void adu_debug_data(int level, const char *function, int size, @@ -132,27 +145,31 @@ static void adu_debug_data(int level, const char *function, int size, */ static void adu_abort_transfers(struct adu_device *dev) { - dbg(2," %s : enter", __FUNCTION__); + unsigned long flags; - if (dev == NULL) { - dbg(1," %s : dev is null", __FUNCTION__); - goto exit; - } + dbg(2," %s : enter", __FUNCTION__); if (dev->udev == NULL) { dbg(1," %s : udev is null", __FUNCTION__); goto exit; } - dbg(2," %s : udev state %d", __FUNCTION__, dev->udev->state); - if (dev->udev->state == USB_STATE_NOTATTACHED) { - dbg(1," %s : udev is not attached", __FUNCTION__); - goto exit; - } - /* shutdown transfer */ - usb_unlink_urb(dev->interrupt_in_urb); - usb_unlink_urb(dev->interrupt_out_urb); + + /* XXX Anchor these instead */ + spin_lock_irqsave(&dev->buflock, flags); + if (!dev->read_urb_finished) { + spin_unlock_irqrestore(&dev->buflock, flags); + usb_kill_urb(dev->interrupt_in_urb); + } else + spin_unlock_irqrestore(&dev->buflock, flags); + + spin_lock_irqsave(&dev->buflock, flags); + if (!dev->out_urb_finished) { + spin_unlock_irqrestore(&dev->buflock, flags); + usb_kill_urb(dev->interrupt_out_urb); + } else + spin_unlock_irqrestore(&dev->buflock, flags); exit: dbg(2," %s : leave", __FUNCTION__); @@ -162,8 +179,6 @@ static void adu_delete(struct adu_device *dev) { dbg(2, "%s enter", __FUNCTION__); - adu_abort_transfers(dev); - /* free data structures */ usb_free_urb(dev->interrupt_in_urb); usb_free_urb(dev->interrupt_out_urb); @@ -239,7 +254,10 @@ static void adu_interrupt_out_callback(struct urb *urb) goto exit; } - wake_up_interruptible(&dev->write_wait); + spin_lock(&dev->buflock); + dev->out_urb_finished = 1; + wake_up(&dev->write_wait); + spin_unlock(&dev->buflock); exit: adu_debug_data(5, __FUNCTION__, urb->actual_length, @@ -252,12 +270,17 @@ static int adu_open(struct inode *inode, struct file *file) struct adu_device *dev = NULL; struct usb_interface *interface; int subminor; - int retval = 0; + int retval; dbg(2,"%s : enter", __FUNCTION__); subminor = iminor(inode); + if ((retval = mutex_lock_interruptible(&adutux_mutex))) { + dbg(2, "%s : mutex lock failed", __FUNCTION__); + goto exit_no_lock; + } + interface = usb_find_interface(&adu_driver, subminor); if (!interface) { err("%s - error, can't find device for minor %d", @@ -267,54 +290,54 @@ static int adu_open(struct inode *inode, struct file *file) } dev = usb_get_intfdata(interface); - if (!dev) { + if (!dev || !dev->udev) { retval = -ENODEV; goto exit_no_device; } - /* lock this device */ - if ((retval = mutex_lock_interruptible(&dev->mtx))) { - dbg(2, "%s : mutex lock failed", __FUNCTION__); + /* check that nobody else is using the device */ + if (dev->open_count) { + retval = -EBUSY; goto exit_no_device; } - /* increment our usage count for the device */ ++dev->open_count; dbg(2,"%s : open count %d", __FUNCTION__, dev->open_count); /* save device in the file's private structure */ file->private_data = dev; - if (dev->open_count == 1) { - /* initialize in direction */ - dev->read_buffer_length = 0; + /* initialize in direction */ + dev->read_buffer_length = 0; - /* fixup first read by having urb waiting for it */ - usb_fill_int_urb(dev->interrupt_in_urb,dev->udev, - usb_rcvintpipe(dev->udev, - dev->interrupt_in_endpoint->bEndpointAddress), - dev->interrupt_in_buffer, - le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), - adu_interrupt_in_callback, dev, - dev->interrupt_in_endpoint->bInterval); - /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */ - dev->read_urb_finished = 0; - retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); - if (retval) - --dev->open_count; - } - mutex_unlock(&dev->mtx); + /* fixup first read by having urb waiting for it */ + usb_fill_int_urb(dev->interrupt_in_urb,dev->udev, + usb_rcvintpipe(dev->udev, + dev->interrupt_in_endpoint->bEndpointAddress), + dev->interrupt_in_buffer, + le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + adu_interrupt_in_callback, dev, + dev->interrupt_in_endpoint->bInterval); + dev->read_urb_finished = 0; + if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL)) + dev->read_urb_finished = 1; + /* we ignore failure */ + /* end of fixup for first read */ + + /* initialize out direction */ + dev->out_urb_finished = 1; + + retval = 0; exit_no_device: + mutex_unlock(&adutux_mutex); +exit_no_lock: dbg(2,"%s : leave, return value %d ", __FUNCTION__, retval); - return retval; } -static int adu_release_internal(struct adu_device *dev) +static void adu_release_internal(struct adu_device *dev) { - int retval = 0; - dbg(2," %s : enter", __FUNCTION__); /* decrement our usage count for the device */ @@ -326,12 +349,11 @@ static int adu_release_internal(struct adu_device *dev) } dbg(2," %s : leave", __FUNCTION__); - return retval; } static int adu_release(struct inode *inode, struct file *file) { - struct adu_device *dev = NULL; + struct adu_device *dev; int retval = 0; dbg(2," %s : enter", __FUNCTION__); @@ -343,15 +365,13 @@ static int adu_release(struct inode *inode, struct file *file) } dev = file->private_data; - if (dev == NULL) { dbg(1," %s : object is NULL", __FUNCTION__); retval = -ENODEV; goto exit; } - /* lock our device */ - mutex_lock(&dev->mtx); /* not interruptible */ + mutex_lock(&adutux_mutex); /* not interruptible */ if (dev->open_count <= 0) { dbg(1," %s : device not opened", __FUNCTION__); @@ -359,19 +379,15 @@ static int adu_release(struct inode *inode, struct file *file) goto exit; } + adu_release_internal(dev); if (dev->udev == NULL) { /* the device was unplugged before the file was released */ - mutex_unlock(&dev->mtx); - adu_delete(dev); - dev = NULL; - } else { - /* do the work */ - retval = adu_release_internal(dev); + if (!dev->open_count) /* ... and we're the last user */ + adu_delete(dev); } exit: - if (dev) - mutex_unlock(&dev->mtx); + mutex_unlock(&adutux_mutex); dbg(2," %s : leave, return value %d", __FUNCTION__, retval); return retval; } @@ -393,12 +409,12 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, dev = file->private_data; dbg(2," %s : dev=%p", __FUNCTION__, dev); - /* lock this object */ + if (mutex_lock_interruptible(&dev->mtx)) return -ERESTARTSYS; /* verify that the device wasn't unplugged */ - if (dev->udev == NULL || dev->minor == 0) { + if (dev->udev == NULL) { retval = -ENODEV; err("No device or device unplugged %d", retval); goto exit; @@ -452,7 +468,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, should_submit = 1; } else { /* even the primary was empty - we may need to do IO */ - if (dev->interrupt_in_urb->status == -EINPROGRESS) { + if (!dev->read_urb_finished) { /* somebody is doing IO */ spin_unlock_irqrestore(&dev->buflock, flags); dbg(2," %s : submitted already", __FUNCTION__); @@ -460,6 +476,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, /* we must initiate input */ dbg(2," %s : initiate input", __FUNCTION__); dev->read_urb_finished = 0; + spin_unlock_irqrestore(&dev->buflock, flags); usb_fill_int_urb(dev->interrupt_in_urb,dev->udev, usb_rcvintpipe(dev->udev, @@ -469,15 +486,12 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, adu_interrupt_in_callback, dev, dev->interrupt_in_endpoint->bInterval); - retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC); - if (!retval) { - spin_unlock_irqrestore(&dev->buflock, flags); - dbg(2," %s : submitted OK", __FUNCTION__); - } else { + retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); + if (retval) { + dev->read_urb_finished = 1; if (retval == -ENOMEM) { retval = bytes_read ? bytes_read : -ENOMEM; } - spin_unlock_irqrestore(&dev->buflock, flags); dbg(2," %s : submit failed", __FUNCTION__); goto exit; } @@ -486,10 +500,14 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, /* we wait for I/O to complete */ set_current_state(TASK_INTERRUPTIBLE); add_wait_queue(&dev->read_wait, &wait); - if (!dev->read_urb_finished) + spin_lock_irqsave(&dev->buflock, flags); + if (!dev->read_urb_finished) { + spin_unlock_irqrestore(&dev->buflock, flags); timeout = schedule_timeout(COMMAND_TIMEOUT); - else + } else { + spin_unlock_irqrestore(&dev->buflock, flags); set_current_state(TASK_RUNNING); + } remove_wait_queue(&dev->read_wait, &wait); if (timeout <= 0) { @@ -509,19 +527,23 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, retval = bytes_read; /* if the primary buffer is empty then use it */ - if (should_submit && !dev->interrupt_in_urb->status==-EINPROGRESS) { + spin_lock_irqsave(&dev->buflock, flags); + if (should_submit && dev->read_urb_finished) { + dev->read_urb_finished = 0; + spin_unlock_irqrestore(&dev->buflock, flags); usb_fill_int_urb(dev->interrupt_in_urb,dev->udev, usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress), - dev->interrupt_in_buffer, - le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), - adu_interrupt_in_callback, - dev, - dev->interrupt_in_endpoint->bInterval); - /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */ - dev->read_urb_finished = 0; - usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); + dev->interrupt_in_buffer, + le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + adu_interrupt_in_callback, + dev, + dev->interrupt_in_endpoint->bInterval); + if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL) != 0) + dev->read_urb_finished = 1; /* we ignore failure */ + } else { + spin_unlock_irqrestore(&dev->buflock, flags); } exit: @@ -535,24 +557,24 @@ exit: static ssize_t adu_write(struct file *file, const __user char *buffer, size_t count, loff_t *ppos) { + DECLARE_WAITQUEUE(waita, current); struct adu_device *dev; size_t bytes_written = 0; size_t bytes_to_write; size_t buffer_size; + unsigned long flags; int retval; - int timeout = 0; dbg(2," %s : enter, count = %Zd", __FUNCTION__, count); dev = file->private_data; - /* lock this object */ retval = mutex_lock_interruptible(&dev->mtx); if (retval) goto exit_nolock; /* verify that the device wasn't unplugged */ - if (dev->udev == NULL || dev->minor == 0) { + if (dev->udev == NULL) { retval = -ENODEV; err("No device or device unplugged %d", retval); goto exit; @@ -564,42 +586,37 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, goto exit; } - while (count > 0) { - if (dev->interrupt_out_urb->status == -EINPROGRESS) { - timeout = COMMAND_TIMEOUT; + add_wait_queue(&dev->write_wait, &waita); + set_current_state(TASK_INTERRUPTIBLE); + spin_lock_irqsave(&dev->buflock, flags); + if (!dev->out_urb_finished) { + spin_unlock_irqrestore(&dev->buflock, flags); - while (timeout > 0) { - if (signal_pending(current)) { + mutex_unlock(&dev->mtx); + if (signal_pending(current)) { dbg(1," %s : interrupted", __FUNCTION__); + set_current_state(TASK_RUNNING); retval = -EINTR; - goto exit; + goto exit_onqueue; } - mutex_unlock(&dev->mtx); - timeout = interruptible_sleep_on_timeout(&dev->write_wait, timeout); + if (schedule_timeout(COMMAND_TIMEOUT) == 0) { + dbg(1, "%s - command timed out.", __FUNCTION__); + retval = -ETIMEDOUT; + goto exit_onqueue; + } + remove_wait_queue(&dev->write_wait, &waita); retval = mutex_lock_interruptible(&dev->mtx); if (retval) { retval = bytes_written ? bytes_written : retval; goto exit_nolock; } - if (timeout > 0) { - break; - } - dbg(1," %s : interrupted timeout: %d", __FUNCTION__, timeout); - } - - - dbg(1," %s : final timeout: %d", __FUNCTION__, timeout); - - if (timeout == 0) { - dbg(1, "%s - command timed out.", __FUNCTION__); - retval = -ETIMEDOUT; - goto exit; - } - - dbg(4," %s : in progress, count = %Zd", __FUNCTION__, count); + dbg(4," %s : in progress, count = %Zd", __FUNCTION__, count); } else { + spin_unlock_irqrestore(&dev->buflock, flags); + set_current_state(TASK_RUNNING); + remove_wait_queue(&dev->write_wait, &waita); dbg(4," %s : sending, count = %Zd", __FUNCTION__, count); /* write the data into interrupt_out_buffer from userspace */ @@ -622,11 +639,12 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, bytes_to_write, adu_interrupt_out_callback, dev, - dev->interrupt_in_endpoint->bInterval); - /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */ + dev->interrupt_out_endpoint->bInterval); dev->interrupt_out_urb->actual_length = bytes_to_write; + dev->out_urb_finished = 0; retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL); if (retval < 0) { + dev->out_urb_finished = 1; err("Couldn't submit interrupt_out_urb %d", retval); goto exit; } @@ -637,16 +655,17 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, bytes_written += bytes_to_write; } } - - retval = bytes_written; + mutex_unlock(&dev->mtx); + return bytes_written; exit: - /* unlock the device */ mutex_unlock(&dev->mtx); exit_nolock: - dbg(2," %s : leave, return value %d", __FUNCTION__, retval); + return retval; +exit_onqueue: + remove_wait_queue(&dev->write_wait, &waita); return retval; } @@ -831,25 +850,22 @@ static void adu_disconnect(struct usb_interface *interface) dbg(2," %s : enter", __FUNCTION__); dev = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); + mutex_lock(&dev->mtx); /* not interruptible */ + dev->udev = NULL; /* poison */ minor = dev->minor; - - /* give back our minor */ usb_deregister_dev(interface, &adu_class); - dev->minor = 0; + mutex_unlock(&dev->mtx); - mutex_lock(&dev->mtx); /* not interruptible */ + mutex_lock(&adutux_mutex); + usb_set_intfdata(interface, NULL); /* if the device is not opened, then we clean up right now */ dbg(2," %s : open count %d", __FUNCTION__, dev->open_count); - if (!dev->open_count) { - mutex_unlock(&dev->mtx); + if (!dev->open_count) adu_delete(dev); - } else { - dev->udev = NULL; - mutex_unlock(&dev->mtx); - } + + mutex_unlock(&adutux_mutex); dev_info(&interface->dev, "ADU device adutux%d now disconnected\n", (minor - ADU_MINOR_BASE)); diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 49c5c5c4c431..06cb71942dc7 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -144,12 +144,14 @@ static void led_disconnect(struct usb_interface *interface) struct usb_led *dev; dev = usb_get_intfdata (interface); - usb_set_intfdata (interface, NULL); device_remove_file(&interface->dev, &dev_attr_blue); device_remove_file(&interface->dev, &dev_attr_red); device_remove_file(&interface->dev, &dev_attr_green); + /* first remove the files, then set the pointer to NULL */ + usb_set_intfdata (interface, NULL); + usb_put_dev(dev->udev); kfree(dev); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 9eb4a65ee4d9..d41531139c55 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -327,6 +327,7 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb) struct usb_serial_port *port = (struct usb_serial_port *)urb->context; unsigned char *data = urb->transfer_buffer; int status = urb->status; + unsigned long flags; dbg("%s - port %d", __FUNCTION__, port->number); @@ -339,11 +340,11 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb) usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); /* Throttle the device if requested by tty */ - spin_lock(&port->lock); + spin_lock_irqsave(&port->lock, flags); if (!(port->throttled = port->throttle_req)) /* Handle data and continue reading from device */ flush_and_resubmit_read_urb(port); - spin_unlock(&port->lock); + spin_unlock_irqrestore(&port->lock, flags); } EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 1f7ab15df36d..feba9679ace8 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1215,12 +1215,14 @@ static int keyspan_chars_in_buffer (struct usb_serial_port *port) static int keyspan_open (struct usb_serial_port *port, struct file *filp) { - struct keyspan_port_private *p_priv; - struct keyspan_serial_private *s_priv; - struct usb_serial *serial = port->serial; + struct keyspan_port_private *p_priv; + struct keyspan_serial_private *s_priv; + struct usb_serial *serial = port->serial; const struct keyspan_device_details *d_details; int i, err; + int baud_rate, device_port; struct urb *urb; + unsigned int cflag; s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1263,6 +1265,30 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp) /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */ } + /* get the terminal config for the setup message now so we don't + * need to send 2 of them */ + + cflag = port->tty->termios->c_cflag; + device_port = port->number - port->serial->minor; + + /* Baud rate calculation takes baud rate as an integer + so other rates can be generated if desired. */ + baud_rate = tty_get_baud_rate(port->tty); + /* If no match or invalid, leave as default */ + if (baud_rate >= 0 + && d_details->calculate_baud_rate(baud_rate, d_details->baudclk, + NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { + p_priv->baud = baud_rate; + } + + /* set CTS/RTS handshake etc. */ + p_priv->cflag = cflag; + p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none; + + keyspan_send_setup(port, 1); + //mdelay(100); + //keyspan_set_termios(port, NULL); + return (0); } diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index a5ced7e08cbf..c29c91271133 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2711,7 +2711,7 @@ static int mos7840_startup(struct usb_serial *serial) status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); if (status < 0) { dbg("Writing ZLP_REG5 failed status-0x%x\n", status); - return -1; + goto error; } else dbg("ZLP_REG5 Writing success status%d\n", status); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 2cd3f1d4b687..cf8add91de05 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -86,6 +86,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ID) }, { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) }, + { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index ed603e3decd6..d31f5d299989 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -104,3 +104,6 @@ #define WS002IN_VENDOR_ID 0x11f6 #define WS002IN_PRODUCT_ID 0x2001 +/* Corega CG-USBRS232R Serial Adapter */ +#define COREGA_VENDOR_ID 0x07aa +#define COREGA_PRODUCT_ID 0x002a diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 833f6e1e3721..605ebccdcd51 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -136,6 +136,8 @@ static struct usb_device_id id_table_3port [] = { { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ + { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ + { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U*/ diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 1ba19eaa1970..836a34ae6ec6 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -177,6 +177,10 @@ static int slave_configure(struct scsi_device *sdev) * is an occasional series of retries that will all fail. */ sdev->retry_hwerror = 1; + /* USB disks should allow restart. Some drives spin down + * automatically, requiring a START-STOP UNIT command. */ + sdev->allow_restart = 1; + } else { /* Non-disk-type devices don't need to blacklist any pages diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 22ab2380367d..2c27721bd259 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -342,11 +342,11 @@ UNUSUAL_DEV( 0x04b0, 0x040d, 0x0100, 0x0100, US_FL_FIX_CAPACITY), /* Reported by Graber and Mike Pagano <mpagano-kernel@mpagano.com> */ -UNUSUAL_DEV( 0x04b0, 0x040f, 0x0200, 0x0200, - "NIKON", - "NIKON DSC D200", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_CAPACITY), +UNUSUAL_DEV( 0x04b0, 0x040f, 0x0100, 0x0200, + "NIKON", + "NIKON DSC D200", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), /* Reported by Emil Larsson <emil@swip.net> */ UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0101, @@ -731,6 +731,13 @@ UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102, US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ), #endif +/* Reported by RTE <raszilki@yandex.ru> */ +UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141, + "JetFlash", + "TS1GJF2A/120", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + /* Fabrizio Fellini <fello@libero.it> */ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, "Fujifilm", diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 7d86e9eae915..5b3dbcfcda48 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -641,6 +641,17 @@ config FB_VESA You will get a boot time penguin logo at no additional cost. Please read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. +config FB_EFI + bool "EFI-based Framebuffer Support" + depends on (FB = y) && X86 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the EFI frame buffer device driver. If the firmware on + your platform is UEFI2.0, select Y to add support for + Graphics Output Protocol for early console messages to appear. + config FB_IMAC bool "Intel-based Macintosh Framebuffer Support" depends on (FB = y) && X86 && EFI diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 59d6c45a910d..83e02b3429b6 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -118,6 +118,7 @@ obj-$(CONFIG_FB_OMAP) += omap/ obj-$(CONFIG_FB_UVESA) += uvesafb.o obj-$(CONFIG_FB_VESA) += vesafb.o obj-$(CONFIG_FB_IMAC) += imacfb.o +obj-$(CONFIG_FB_EFI) += efifb.o obj-$(CONFIG_FB_VGA16) += vga16fb.o obj-$(CONFIG_FB_OF) += offb.o obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 235b618b4117..11a3a222dfc3 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -268,6 +268,10 @@ static int atmel_lcdfb_set_par(struct fb_info *info) /* Turn off the LCD controller and the DMA controller */ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET); + /* Wait for the LCDC core to become idle */ + while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) + msleep(10); + lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); if (info->var.bits_per_pixel == 1) diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 1e32b3d13f2e..62867cb63fef 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -202,6 +202,7 @@ static struct pci_device_id radeonfb_pci_table[] = { CHIP_DEF(PCI_CHIP_RV380_3154, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), CHIP_DEF(PCI_CHIP_RV370_5B60, RV380, CHIP_HAS_CRTC2), CHIP_DEF(PCI_CHIP_RV370_5B62, RV380, CHIP_HAS_CRTC2), + CHIP_DEF(PCI_CHIP_RV370_5B63, RV380, CHIP_HAS_CRTC2), CHIP_DEF(PCI_CHIP_RV370_5B64, RV380, CHIP_HAS_CRTC2), CHIP_DEF(PCI_CHIP_RV370_5B65, RV380, CHIP_HAS_CRTC2), CHIP_DEF(PCI_CHIP_RV370_5460, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 267422f66255..b87ed37ac0c1 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -6,7 +6,7 @@ menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EMBEDDED || !X86 - depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BFIN + depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN default y help Saying Y here will allow you to use Linux in text mode through a diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c new file mode 100644 index 000000000000..bd779ae44b1e --- /dev/null +++ b/drivers/video/efifb.c @@ -0,0 +1,232 @@ +/* + * Framebuffer driver for EFI/UEFI based system + * + * (c) 2006 Edgar Hucek <gimli@dark-green.com> + * Original efi driver written by Gerd Knorr <kraxel@goldbach.in-berlin.de> + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/fb.h> +#include <linux/platform_device.h> +#include <linux/screen_info.h> + +#include <video/vga.h> + +static struct fb_var_screeninfo efifb_defined __initdata = { + .activate = FB_ACTIVATE_NOW, + .height = -1, + .width = -1, + .right_margin = 32, + .upper_margin = 16, + .lower_margin = 4, + .vsync_len = 4, + .vmode = FB_VMODE_NONINTERLACED, +}; + +static struct fb_fix_screeninfo efifb_fix __initdata = { + .id = "EFI VGA", + .type = FB_TYPE_PACKED_PIXELS, + .accel = FB_ACCEL_NONE, + .visual = FB_VISUAL_TRUECOLOR, +}; + +static int efifb_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned transp, + struct fb_info *info) +{ + /* + * Set a single color register. The values supplied are + * already rounded down to the hardware's capabilities + * (according to the entries in the `var' structure). Return + * != 0 for invalid regno. + */ + + if (regno >= info->cmap.len) + return 1; + + if (regno < 16) { + red >>= 8; + green >>= 8; + blue >>= 8; + ((u32 *)(info->pseudo_palette))[regno] = + (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + } + return 0; +} + +static struct fb_ops efifb_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = efifb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +static int __init efifb_probe(struct platform_device *dev) +{ + struct fb_info *info; + int err; + unsigned int size_vmode; + unsigned int size_remap; + unsigned int size_total; + + efifb_fix.smem_start = screen_info.lfb_base; + efifb_defined.bits_per_pixel = screen_info.lfb_depth; + efifb_defined.xres = screen_info.lfb_width; + efifb_defined.yres = screen_info.lfb_height; + efifb_fix.line_length = screen_info.lfb_linelength; + + /* size_vmode -- that is the amount of memory needed for the + * used video mode, i.e. the minimum amount of + * memory we need. */ + size_vmode = efifb_defined.yres * efifb_fix.line_length; + + /* size_total -- all video memory we have. Used for + * entries, ressource allocation and bounds + * checking. */ + size_total = screen_info.lfb_size; + if (size_total < size_vmode) + size_total = size_vmode; + + /* size_remap -- the amount of video memory we are going to + * use for efifb. With modern cards it is no + * option to simply use size_total as that + * wastes plenty of kernel address space. */ + size_remap = size_vmode * 2; + if (size_remap < size_vmode) + size_remap = size_vmode; + if (size_remap > size_total) + size_remap = size_total; + efifb_fix.smem_len = size_remap; + + if (!request_mem_region(efifb_fix.smem_start, size_total, "efifb")) + /* We cannot make this fatal. Sometimes this comes from magic + spaces our resource handlers simply don't know about */ + printk(KERN_WARNING + "efifb: cannot reserve video memory at 0x%lx\n", + efifb_fix.smem_start); + + info = framebuffer_alloc(sizeof(u32) * 16, &dev->dev); + if (!info) { + err = -ENOMEM; + goto err_release_mem; + } + info->pseudo_palette = info->par; + info->par = NULL; + + info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len); + if (!info->screen_base) { + printk(KERN_ERR "efifb: abort, cannot ioremap video memory " + "0x%x @ 0x%lx\n", + efifb_fix.smem_len, efifb_fix.smem_start); + err = -EIO; + goto err_unmap; + } + + printk(KERN_INFO "efifb: framebuffer at 0x%lx, mapped to 0x%p, " + "using %dk, total %dk\n", + efifb_fix.smem_start, info->screen_base, + size_remap/1024, size_total/1024); + printk(KERN_INFO "efifb: mode is %dx%dx%d, linelength=%d, pages=%d\n", + efifb_defined.xres, efifb_defined.yres, + efifb_defined.bits_per_pixel, efifb_fix.line_length, + screen_info.pages); + + efifb_defined.xres_virtual = efifb_defined.xres; + efifb_defined.yres_virtual = efifb_fix.smem_len / + efifb_fix.line_length; + printk(KERN_INFO "efifb: scrolling: redraw\n"); + efifb_defined.yres_virtual = efifb_defined.yres; + + /* some dummy values for timing to make fbset happy */ + efifb_defined.pixclock = 10000000 / efifb_defined.xres * + 1000 / efifb_defined.yres; + efifb_defined.left_margin = (efifb_defined.xres / 8) & 0xf8; + efifb_defined.hsync_len = (efifb_defined.xres / 8) & 0xf8; + + efifb_defined.red.offset = screen_info.red_pos; + efifb_defined.red.length = screen_info.red_size; + efifb_defined.green.offset = screen_info.green_pos; + efifb_defined.green.length = screen_info.green_size; + efifb_defined.blue.offset = screen_info.blue_pos; + efifb_defined.blue.length = screen_info.blue_size; + efifb_defined.transp.offset = screen_info.rsvd_pos; + efifb_defined.transp.length = screen_info.rsvd_size; + + printk(KERN_INFO "efifb: %s: " + "size=%d:%d:%d:%d, shift=%d:%d:%d:%d\n", + "Truecolor", + screen_info.rsvd_size, + screen_info.red_size, + screen_info.green_size, + screen_info.blue_size, + screen_info.rsvd_pos, + screen_info.red_pos, + screen_info.green_pos, + screen_info.blue_pos); + + efifb_fix.ypanstep = 0; + efifb_fix.ywrapstep = 0; + + info->fbops = &efifb_ops; + info->var = efifb_defined; + info->fix = efifb_fix; + info->flags = FBINFO_FLAG_DEFAULT; + + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { + err = -ENOMEM; + goto err_unmap; + } + if (register_framebuffer(info) < 0) { + err = -EINVAL; + goto err_fb_dealoc; + } + printk(KERN_INFO "fb%d: %s frame buffer device\n", + info->node, info->fix.id); + return 0; + +err_fb_dealoc: + fb_dealloc_cmap(&info->cmap); +err_unmap: + iounmap(info->screen_base); + framebuffer_release(info); +err_release_mem: + release_mem_region(efifb_fix.smem_start, size_total); + return err; +} + +static struct platform_driver efifb_driver = { + .probe = efifb_probe, + .driver = { + .name = "efifb", + }, +}; + +static struct platform_device efifb_device = { + .name = "efifb", +}; + +static int __init efifb_init(void) +{ + int ret; + + if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI) + return -ENODEV; + + ret = platform_driver_register(&efifb_driver); + + if (!ret) { + ret = platform_device_register(&efifb_device); + if (ret) + platform_driver_unregister(&efifb_driver); + } + return ret; +} +module_init(efifb_init); + +MODULE_LICENSE("GPL"); diff --git a/drivers/video/fb_ddc.c b/drivers/video/fb_ddc.c index f836137a0eda..a0df63289b5f 100644 --- a/drivers/video/fb_ddc.c +++ b/drivers/video/fb_ddc.c @@ -56,13 +56,12 @@ unsigned char *fb_ddc_read(struct i2c_adapter *adapter) int i, j; algo_data->setscl(algo_data->data, 1); - algo_data->setscl(algo_data->data, 0); for (i = 0; i < 3; i++) { /* For some old monitors we need the * following process to initialize/stop DDC */ - algo_data->setsda(algo_data->data, 0); + algo_data->setsda(algo_data->data, 1); msleep(13); algo_data->setscl(algo_data->data, 1); @@ -97,14 +96,15 @@ unsigned char *fb_ddc_read(struct i2c_adapter *adapter) algo_data->setsda(algo_data->data, 1); msleep(15); algo_data->setscl(algo_data->data, 0); + algo_data->setsda(algo_data->data, 0); if (edid) break; } /* Release the DDC lines when done or the Apple Cinema HD display * will switch off */ - algo_data->setsda(algo_data->data, 0); - algo_data->setscl(algo_data->data, 0); + algo_data->setsda(algo_data->data, 1); + algo_data->setscl(algo_data->data, 1); return edid; } diff --git a/drivers/video/imacfb.c b/drivers/video/imacfb.c index 6455fd2a39f2..9366ef2bb5f7 100644 --- a/drivers/video/imacfb.c +++ b/drivers/video/imacfb.c @@ -234,10 +234,6 @@ static int __init imacfb_probe(struct platform_device *dev) size_remap = size_total; imacfb_fix.smem_len = size_remap; -#ifndef __i386__ - screen_info.imacpm_seg = 0; -#endif - if (!request_mem_region(imacfb_fix.smem_start, size_total, "imacfb")) { printk(KERN_WARNING "imacfb: cannot reserve video memory at 0x%lx\n", diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index 75836aa83191..9c56c492a693 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -51,7 +51,6 @@ #define L1GPU_DISPLAY_SYNC_HSYNC 1 #define L1GPU_DISPLAY_SYNC_VSYNC 2 -#define DDR_SIZE (0) /* used no ddr */ #define GPU_CMD_BUF_SIZE (64 * 1024) #define GPU_IOIF (0x0d000000UL) #define GPU_ALIGN_UP(x) _ALIGN_UP((x), 64) @@ -1060,6 +1059,7 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev) u64 xdr_lpar; int status, res_index; struct task_struct *task; + unsigned long max_ps3fb_size; status = ps3_open_hv_device(dev); if (status) { @@ -1085,8 +1085,15 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev) ps3fb_set_sync(&dev->core); + max_ps3fb_size = _ALIGN_UP(GPU_IOIF, 256*1024*1024) - GPU_IOIF; + if (ps3fb_videomemory.size > max_ps3fb_size) { + dev_info(&dev->core, "Limiting ps3fb mem size to %lu bytes\n", + max_ps3fb_size); + ps3fb_videomemory.size = max_ps3fb_size; + } + /* get gpu context handle */ - status = lv1_gpu_memory_allocate(DDR_SIZE, 0, 0, 0, 0, + status = lv1_gpu_memory_allocate(ps3fb_videomemory.size, 0, 0, 0, 0, &ps3fb.memory_handle, &ddr_lpar); if (status) { dev_err(&dev->core, "%s: lv1_gpu_memory_allocate failed: %d\n", diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 15d7787dea87..69d7ea02cd48 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -96,10 +96,23 @@ static int virtio_dev_probe(struct device *_d) return err; } +static int virtio_dev_remove(struct device *_d) +{ + struct virtio_device *dev = container_of(_d,struct virtio_device,dev); + struct virtio_driver *drv = container_of(dev->dev.driver, + struct virtio_driver, driver); + + dev->config->set_status(dev, dev->config->get_status(dev) + & ~VIRTIO_CONFIG_S_DRIVER); + drv->remove(dev); + return 0; +} + int register_virtio_driver(struct virtio_driver *driver) { driver->driver.bus = &virtio_bus; driver->driver.probe = virtio_dev_probe; + driver->driver.remove = virtio_dev_remove; return driver_register(&driver->driver); } EXPORT_SYMBOL_GPL(register_virtio_driver); diff --git a/drivers/zorro/zorro-driver.c b/drivers/zorro/zorro-driver.c index 067c07be928c..e6c4390d8bd6 100644 --- a/drivers/zorro/zorro-driver.c +++ b/drivers/zorro/zorro-driver.c @@ -60,6 +60,20 @@ static int zorro_device_probe(struct device *dev) } +static int zorro_device_remove(struct device *dev) +{ + struct zorro_dev *z = to_zorro_dev(dev); + struct zorro_driver *drv = to_zorro_driver(dev->driver); + + if (drv) { + if (drv->remove) + drv->remove(z); + z->driver = NULL; + } + return 0; +} + + /** * zorro_register_driver - register a new Zorro driver * @drv: the driver structure to register @@ -128,6 +142,7 @@ struct bus_type zorro_bus_type = { .name = "zorro", .match = zorro_bus_match, .probe = zorro_device_probe, + .remove = zorro_device_remove, }; |