summaryrefslogtreecommitdiff
path: root/drivers/w1
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/w1')
-rw-r--r--drivers/w1/masters/matrox_w1.c6
-rw-r--r--drivers/w1/slaves/Kconfig6
-rw-r--r--drivers/w1/slaves/Makefile1
-rw-r--r--drivers/w1/slaves/w1_ds2438.c390
-rw-r--r--drivers/w1/slaves/w1_ds2760.h10
-rw-r--r--drivers/w1/w1.c1
-rw-r--r--drivers/w1/w1_family.h1
-rw-r--r--drivers/w1/w1_int.c1
-rw-r--r--drivers/w1/w1_io.c1
-rw-r--r--drivers/w1/w1_log.h31
-rw-r--r--drivers/w1/w1_netlink.c5
11 files changed, 405 insertions, 48 deletions
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index 3749db8b4396..97a676bf5989 100644
--- a/drivers/w1/masters/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -36,7 +36,6 @@
#include "../w1.h"
#include "../w1_int.h"
-#include "../w1_log.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
@@ -157,9 +156,6 @@ static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent
struct matrox_device *dev;
int err;
- assert(pdev != NULL);
- assert(ent != NULL);
-
if (pdev->vendor != PCI_VENDOR_ID_MATROX || pdev->device != PCI_DEVICE_ID_MATROX_G400)
return -ENODEV;
@@ -224,8 +220,6 @@ static void matrox_w1_remove(struct pci_dev *pdev)
{
struct matrox_device *dev = pci_get_drvdata(pdev);
- assert(dev != NULL);
-
if (dev->found) {
w1_remove_master_device(dev->bus_master);
iounmap(dev->virt_addr);
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 0ef9f2663dbd..fb68465908f2 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -86,6 +86,12 @@ config W1_SLAVE_DS2433_CRC
Each block has 30 bytes of data and a two byte CRC16.
Full block writes are only allowed if the CRC is valid.
+config W1_SLAVE_DS2438
+ tristate "DS2438 Smart Battery Monitor 0x26 family support"
+ help
+ Say Y here if you want to use a 1-wire
+ DS2438 Smart Battery Monitor device support
+
config W1_SLAVE_DS2760
tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
help
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index b4a358955ef9..54c63e420302 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_W1_SLAVE_DS2406) += w1_ds2406.o
obj-$(CONFIG_W1_SLAVE_DS2423) += w1_ds2423.o
obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
+obj-$(CONFIG_W1_SLAVE_DS2438) += w1_ds2438.o
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o
diff --git a/drivers/w1/slaves/w1_ds2438.c b/drivers/w1/slaves/w1_ds2438.c
new file mode 100644
index 000000000000..5ededb4965e1
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds2438.c
@@ -0,0 +1,390 @@
+/*
+ * 1-Wire implementation for the ds2438 chip
+ *
+ * Copyright (c) 2017 Mariusz Bialonczyk <manio@skyboo.net>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+
+#include "../w1.h"
+#include "../w1_family.h"
+
+#define W1_DS2438_RETRIES 3
+
+/* Memory commands */
+#define W1_DS2438_READ_SCRATCH 0xBE
+#define W1_DS2438_WRITE_SCRATCH 0x4E
+#define W1_DS2438_COPY_SCRATCH 0x48
+#define W1_DS2438_RECALL_MEMORY 0xB8
+/* Register commands */
+#define W1_DS2438_CONVERT_TEMP 0x44
+#define W1_DS2438_CONVERT_VOLTAGE 0xB4
+
+#define DS2438_PAGE_SIZE 8
+#define DS2438_ADC_INPUT_VAD 0
+#define DS2438_ADC_INPUT_VDD 1
+#define DS2438_MAX_CONVERSION_TIME 10 /* ms */
+
+/* Page #0 definitions */
+#define DS2438_STATUS_REG 0x00 /* Status/Configuration Register */
+#define DS2438_STATUS_IAD (1 << 0) /* Current A/D Control Bit */
+#define DS2438_STATUS_CA (1 << 1) /* Current Accumulator Configuration */
+#define DS2438_STATUS_EE (1 << 2) /* Current Accumulator Shadow Selector bit */
+#define DS2438_STATUS_AD (1 << 3) /* Voltage A/D Input Select Bit */
+#define DS2438_STATUS_TB (1 << 4) /* Temperature Busy Flag */
+#define DS2438_STATUS_NVB (1 << 5) /* Nonvolatile Memory Busy Flag */
+#define DS2438_STATUS_ADB (1 << 6) /* A/D Converter Busy Flag */
+
+#define DS2438_TEMP_LSB 0x01
+#define DS2438_TEMP_MSB 0x02
+#define DS2438_VOLTAGE_LSB 0x03
+#define DS2438_VOLTAGE_MSB 0x04
+#define DS2438_CURRENT_LSB 0x05
+#define DS2438_CURRENT_MSB 0x06
+#define DS2438_THRESHOLD 0x07
+
+int w1_ds2438_get_page(struct w1_slave *sl, int pageno, u8 *buf)
+{
+ unsigned int retries = W1_DS2438_RETRIES;
+ u8 w1_buf[2];
+ u8 crc;
+ size_t count;
+
+ while (retries--) {
+ crc = 0;
+
+ if (w1_reset_select_slave(sl))
+ continue;
+ w1_buf[0] = W1_DS2438_RECALL_MEMORY;
+ w1_buf[1] = 0x00;
+ w1_write_block(sl->master, w1_buf, 2);
+
+ if (w1_reset_select_slave(sl))
+ continue;
+ w1_buf[0] = W1_DS2438_READ_SCRATCH;
+ w1_buf[1] = 0x00;
+ w1_write_block(sl->master, w1_buf, 2);
+
+ count = w1_read_block(sl->master, buf, DS2438_PAGE_SIZE + 1);
+ if (count == DS2438_PAGE_SIZE + 1) {
+ crc = w1_calc_crc8(buf, DS2438_PAGE_SIZE);
+
+ /* check for correct CRC */
+ if ((u8)buf[DS2438_PAGE_SIZE] == crc)
+ return 0;
+ }
+ }
+ return -1;
+}
+
+int w1_ds2438_get_temperature(struct w1_slave *sl, int16_t *temperature)
+{
+ unsigned int retries = W1_DS2438_RETRIES;
+ u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
+ unsigned int tm = DS2438_MAX_CONVERSION_TIME;
+ unsigned long sleep_rem;
+ int ret;
+
+ mutex_lock(&sl->master->bus_mutex);
+
+ while (retries--) {
+ if (w1_reset_select_slave(sl))
+ continue;
+ w1_write_8(sl->master, W1_DS2438_CONVERT_TEMP);
+
+ mutex_unlock(&sl->master->bus_mutex);
+ sleep_rem = msleep_interruptible(tm);
+ if (sleep_rem != 0) {
+ ret = -1;
+ goto post_unlock;
+ }
+
+ if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) {
+ ret = -1;
+ goto post_unlock;
+ }
+
+ break;
+ }
+
+ if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
+ *temperature = (((int16_t) w1_buf[DS2438_TEMP_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_TEMP_LSB]);
+ ret = 0;
+ } else
+ ret = -1;
+
+ mutex_unlock(&sl->master->bus_mutex);
+
+post_unlock:
+ return ret;
+}
+
+int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value)
+{
+ unsigned int retries = W1_DS2438_RETRIES;
+ u8 w1_buf[3];
+ u8 status;
+ int perform_write = 0;
+
+ while (retries--) {
+ if (w1_reset_select_slave(sl))
+ continue;
+ w1_buf[0] = W1_DS2438_RECALL_MEMORY;
+ w1_buf[1] = 0x00;
+ w1_write_block(sl->master, w1_buf, 2);
+
+ if (w1_reset_select_slave(sl))
+ continue;
+ w1_buf[0] = W1_DS2438_READ_SCRATCH;
+ w1_buf[1] = 0x00;
+ w1_write_block(sl->master, w1_buf, 2);
+
+ /* reading one byte of result */
+ status = w1_read_8(sl->master);
+
+ /* if bit0=1, set a value to a mask for easy compare */
+ if (value)
+ value = mask;
+
+ if ((status & mask) == value)
+ return 0; /* already set as requested */
+ else {
+ /* changing bit */
+ status ^= mask;
+ perform_write = 1;
+ }
+ break;
+ }
+
+ if (perform_write) {
+ retries = W1_DS2438_RETRIES;
+ while (retries--) {
+ if (w1_reset_select_slave(sl))
+ continue;
+ w1_buf[0] = W1_DS2438_WRITE_SCRATCH;
+ w1_buf[1] = 0x00;
+ w1_buf[2] = status;
+ w1_write_block(sl->master, w1_buf, 3);
+
+ if (w1_reset_select_slave(sl))
+ continue;
+ w1_buf[0] = W1_DS2438_COPY_SCRATCH;
+ w1_buf[1] = 0x00;
+ w1_write_block(sl->master, w1_buf, 2);
+
+ return 0;
+ }
+ }
+ return -1;
+}
+
+uint16_t w1_ds2438_get_voltage(struct w1_slave *sl, int adc_input, uint16_t *voltage)
+{
+ unsigned int retries = W1_DS2438_RETRIES;
+ u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
+ unsigned int tm = DS2438_MAX_CONVERSION_TIME;
+ unsigned long sleep_rem;
+ int ret;
+
+ mutex_lock(&sl->master->bus_mutex);
+
+ if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_AD, adc_input)) {
+ ret = -1;
+ goto pre_unlock;
+ }
+
+ while (retries--) {
+ if (w1_reset_select_slave(sl))
+ continue;
+ w1_write_8(sl->master, W1_DS2438_CONVERT_VOLTAGE);
+
+ mutex_unlock(&sl->master->bus_mutex);
+ sleep_rem = msleep_interruptible(tm);
+ if (sleep_rem != 0) {
+ ret = -1;
+ goto post_unlock;
+ }
+
+ if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) {
+ ret = -1;
+ goto post_unlock;
+ }
+
+ break;
+ }
+
+ if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
+ *voltage = (((uint16_t) w1_buf[DS2438_VOLTAGE_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_VOLTAGE_LSB]);
+ ret = 0;
+ } else
+ ret = -1;
+
+pre_unlock:
+ mutex_unlock(&sl->master->bus_mutex);
+
+post_unlock:
+ return ret;
+}
+
+static ssize_t iad_write(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ int ret;
+
+ if (count != 1 || off != 0)
+ return -EFAULT;
+
+ mutex_lock(&sl->master->bus_mutex);
+
+ if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_IAD, *buf & 0x01) == 0)
+ ret = 1;
+ else
+ ret = -EIO;
+
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+static ssize_t page0_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ int ret;
+ u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
+
+ if (off != 0)
+ return 0;
+ if (!buf)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+
+ if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
+ memcpy(buf, &w1_buf, DS2438_PAGE_SIZE);
+ ret = DS2438_PAGE_SIZE;
+ } else
+ ret = -EIO;
+
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+static ssize_t temperature_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ int ret;
+ ssize_t c = PAGE_SIZE;
+ int16_t temp;
+
+ if (off != 0)
+ return 0;
+ if (!buf)
+ return -EINVAL;
+
+ if (w1_ds2438_get_temperature(sl, &temp) == 0) {
+ c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", temp);
+ ret = PAGE_SIZE - c;
+ } else
+ ret = -EIO;
+
+ return ret;
+}
+
+static ssize_t vad_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ int ret;
+ ssize_t c = PAGE_SIZE;
+ uint16_t voltage;
+
+ if (off != 0)
+ return 0;
+ if (!buf)
+ return -EINVAL;
+
+ if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VAD, &voltage) == 0) {
+ c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage);
+ ret = PAGE_SIZE - c;
+ } else
+ ret = -EIO;
+
+ return ret;
+}
+
+static ssize_t vdd_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ int ret;
+ ssize_t c = PAGE_SIZE;
+ uint16_t voltage;
+
+ if (off != 0)
+ return 0;
+ if (!buf)
+ return -EINVAL;
+
+ if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VDD, &voltage) == 0) {
+ c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage);
+ ret = PAGE_SIZE - c;
+ } else
+ ret = -EIO;
+
+ return ret;
+}
+
+static BIN_ATTR(iad, S_IRUGO | S_IWUSR | S_IWGRP, NULL, iad_write, 1);
+static BIN_ATTR_RO(page0, DS2438_PAGE_SIZE);
+static BIN_ATTR_RO(temperature, 0/* real length varies */);
+static BIN_ATTR_RO(vad, 0/* real length varies */);
+static BIN_ATTR_RO(vdd, 0/* real length varies */);
+
+static struct bin_attribute *w1_ds2438_bin_attrs[] = {
+ &bin_attr_iad,
+ &bin_attr_page0,
+ &bin_attr_temperature,
+ &bin_attr_vad,
+ &bin_attr_vdd,
+ NULL,
+};
+
+static const struct attribute_group w1_ds2438_group = {
+ .bin_attrs = w1_ds2438_bin_attrs,
+};
+
+static const struct attribute_group *w1_ds2438_groups[] = {
+ &w1_ds2438_group,
+ NULL,
+};
+
+static struct w1_family_ops w1_ds2438_fops = {
+ .groups = w1_ds2438_groups,
+};
+
+static struct w1_family w1_ds2438_family = {
+ .fid = W1_FAMILY_DS2438,
+ .fops = &w1_ds2438_fops,
+};
+module_w1_family(w1_ds2438_family);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mariusz Bialonczyk <manio@skyboo.net>");
+MODULE_DESCRIPTION("1-wire driver for Maxim/Dallas DS2438 Smart Battery Monitor");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2438));
diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h
index 58e774141568..24168c94eeae 100644
--- a/drivers/w1/slaves/w1_ds2760.h
+++ b/drivers/w1/slaves/w1_ds2760.h
@@ -24,11 +24,13 @@
#define DS2760_DATA_SIZE 0x40
#define DS2760_PROTECTION_REG 0x00
+
#define DS2760_STATUS_REG 0x01
- #define DS2760_STATUS_IE (1 << 2)
- #define DS2760_STATUS_SWEN (1 << 3)
- #define DS2760_STATUS_RNAOP (1 << 4)
- #define DS2760_STATUS_PMOD (1 << 5)
+#define DS2760_STATUS_IE (1 << 2)
+#define DS2760_STATUS_SWEN (1 << 3)
+#define DS2760_STATUS_RNAOP (1 << 4)
+#define DS2760_STATUS_PMOD (1 << 5)
+
#define DS2760_EEPROM_REG 0x07
#define DS2760_SPECIAL_FEATURE_REG 0x08
#define DS2760_VOLTAGE_MSB 0x0c
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 90a3d9338fd2..8511d1685db9 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -29,7 +29,6 @@
#include <linux/atomic.h>
#include "w1.h"
-#include "w1_log.h"
#include "w1_int.h"
#include "w1_family.h"
#include "w1_netlink.h"
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index c4a6b257a367..869a3ff87d29 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -29,6 +29,7 @@
#define W1_COUNTER_DS2423 0x1D
#define W1_THERM_DS1822 0x22
#define W1_EEPROM_DS2433 0x23
+#define W1_FAMILY_DS2438 0x26
#define W1_THERM_DS18B20 0x28
#define W1_FAMILY_DS2408 0x29
#define W1_EEPROM_DS2431 0x2D
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 2cae7b29bb5f..1072a2e620bb 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -22,7 +22,6 @@
#include <linux/moduleparam.h>
#include "w1.h"
-#include "w1_log.h"
#include "w1_netlink.h"
#include "w1_int.h"
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index de8bebc27896..1134e6b1eb02 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -19,7 +19,6 @@
#include <linux/module.h>
#include "w1.h"
-#include "w1_log.h"
static int w1_delay_parm = 1;
module_param_named(delay_coef, w1_delay_parm, int, 0);
diff --git a/drivers/w1/w1_log.h b/drivers/w1/w1_log.h
deleted file mode 100644
index dd1422b6afbb..000000000000
--- a/drivers/w1/w1_log.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __W1_LOG_H
-#define __W1_LOG_H
-
-#define DEBUG
-
-#ifdef W1_DEBUG
-# define assert(expr) do {} while (0)
-#else
-# define assert(expr) \
- if(unlikely(!(expr))) { \
- pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
- #expr, __FILE__, __func__, __LINE__); \
- }
-#endif
-
-#endif /* __W1_LOG_H */
-
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 49e520ca79c5..027950f997d1 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -18,13 +18,10 @@
#include <linux/connector.h>
#include "w1.h"
-#include "w1_log.h"
#include "w1_netlink.h"
#if defined(CONFIG_W1_CON) && (defined(CONFIG_CONNECTOR) || (defined(CONFIG_CONNECTOR_MODULE) && defined(CONFIG_W1_MODULE)))
-#define MIN(a, b) (((a) < (b)) ? (a) : (b))
-
/* Bundle together everything required to process a request in one memory
* allocation.
*/
@@ -598,7 +595,7 @@ static void w1_cn_callback(struct cn_msg *cn, struct netlink_skb_parms *nsp)
sizeof(struct w1_netlink_msg) +
sizeof(struct w1_netlink_cmd));
}
- reply_size = MIN(CONNECTOR_MAX_MSG_SIZE, reply_size);
+ reply_size = min(CONNECTOR_MAX_MSG_SIZE, reply_size);
/* allocate space for the block, a copy of the original message,
* one node per cmd to point into the original message,
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-05 00:14:32 +0000