summaryrefslogtreecommitdiff
path: root/drivers/usb/storage
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/storage')
-rw-r--r--drivers/usb/storage/onetouch.c3
-rw-r--r--drivers/usb/storage/scsiglue.c4
-rw-r--r--drivers/usb/storage/shuttle_usbat.c105
-rw-r--r--drivers/usb/storage/shuttle_usbat.h4
-rw-r--r--drivers/usb/storage/transport.c88
-rw-r--r--drivers/usb/storage/unusual_devs.h35
-rw-r--r--drivers/usb/storage/usb.c51
7 files changed, 173 insertions, 117 deletions
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 55ee2d36d585..026a587eb8dd 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -34,9 +34,8 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/usb.h>
#include <linux/usb_ch9.h>
-#include <linux/usb_input.h>
+#include <linux/usb/input.h>
#include "usb.h"
#include "onetouch.h"
#include "debug.h"
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 5f11e19eaae3..5715291ba540 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -286,11 +286,7 @@ static int bus_reset(struct scsi_cmnd *srb)
int result;
US_DEBUGP("%s called\n", __FUNCTION__);
-
- mutex_lock(&(us->dev_mutex));
result = usb_stor_port_reset(us);
- mutex_unlock(&us->dev_mutex);
-
return result < 0 ? FAILED : SUCCESS;
}
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index f2bc5c9e23d5..8fcec01dc622 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -131,28 +131,30 @@ static int usbat_write(struct us_data *us,
* Convenience function to perform a bulk read
*/
static int usbat_bulk_read(struct us_data *us,
- unsigned char *data,
- unsigned int len)
+ unsigned char *data,
+ unsigned int len,
+ int use_sg)
{
if (len == 0)
return USB_STOR_XFER_GOOD;
US_DEBUGP("usbat_bulk_read: len = %d\n", len);
- return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, data, len, NULL);
+ return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, data, len, use_sg, NULL);
}
/*
* Convenience function to perform a bulk write
*/
static int usbat_bulk_write(struct us_data *us,
- unsigned char *data,
- unsigned int len)
+ unsigned char *data,
+ unsigned int len,
+ int use_sg)
{
if (len == 0)
return USB_STOR_XFER_GOOD;
US_DEBUGP("usbat_bulk_write: len = %d\n", len);
- return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, data, len, NULL);
+ return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, data, len, use_sg, NULL);
}
/*
@@ -317,7 +319,8 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes)
*/
static int usbat_read_block(struct us_data *us,
unsigned char *content,
- unsigned short len)
+ unsigned short len,
+ int use_sg)
{
int result;
unsigned char *command = us->iobuf;
@@ -338,7 +341,7 @@ static int usbat_read_block(struct us_data *us,
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- result = usbat_bulk_read(us, content, len);
+ result = usbat_bulk_read(us, content, len, use_sg);
return (result == USB_STOR_XFER_GOOD ?
USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
}
@@ -350,7 +353,8 @@ static int usbat_write_block(struct us_data *us,
unsigned char access,
unsigned char *content,
unsigned short len,
- int minutes)
+ int minutes,
+ int use_sg)
{
int result;
unsigned char *command = us->iobuf;
@@ -372,7 +376,7 @@ static int usbat_write_block(struct us_data *us,
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- result = usbat_bulk_write(us, content, len);
+ result = usbat_bulk_write(us, content, len, use_sg);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -465,7 +469,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
data[1+(j<<1)] = data_out[j];
}
- result = usbat_bulk_write(us, data, num_registers*2);
+ result = usbat_bulk_write(us, data, num_registers*2, 0);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -583,7 +587,7 @@ static int usbat_multiple_write(struct us_data *us,
}
/* Send the data */
- result = usbat_bulk_write(us, data, num_registers*2);
+ result = usbat_bulk_write(us, data, num_registers*2, 0);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -606,8 +610,9 @@ static int usbat_multiple_write(struct us_data *us,
* other related details) are defined beforehand with _set_shuttle_features().
*/
static int usbat_read_blocks(struct us_data *us,
- unsigned char *buffer,
- int len)
+ unsigned char *buffer,
+ int len,
+ int use_sg)
{
int result;
unsigned char *command = us->iobuf;
@@ -627,7 +632,7 @@ static int usbat_read_blocks(struct us_data *us,
return USB_STOR_TRANSPORT_FAILED;
/* Read the blocks we just asked for */
- result = usbat_bulk_read(us, buffer, len);
+ result = usbat_bulk_read(us, buffer, len, use_sg);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
@@ -648,7 +653,8 @@ static int usbat_read_blocks(struct us_data *us,
*/
static int usbat_write_blocks(struct us_data *us,
unsigned char *buffer,
- int len)
+ int len,
+ int use_sg)
{
int result;
unsigned char *command = us->iobuf;
@@ -668,7 +674,7 @@ static int usbat_write_blocks(struct us_data *us,
return USB_STOR_TRANSPORT_FAILED;
/* Write the data */
- result = usbat_bulk_write(us, buffer, len);
+ result = usbat_bulk_write(us, buffer, len, use_sg);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
@@ -887,22 +893,28 @@ static int usbat_identify_device(struct us_data *us,
* Set the transport function based on the device type
*/
static int usbat_set_transport(struct us_data *us,
- struct usbat_info *info)
+ struct usbat_info *info,
+ int devicetype)
{
- int rc;
- if (!info->devicetype) {
- rc = usbat_identify_device(us, info);
- if (rc != USB_STOR_TRANSPORT_GOOD) {
- US_DEBUGP("usbat_set_transport: Could not identify device\n");
- return 1;
- }
- }
+ if (!info->devicetype)
+ info->devicetype = devicetype;
- if (usbat_get_device_type(us) == USBAT_DEV_HP8200)
+ if (!info->devicetype)
+ usbat_identify_device(us, info);
+
+ switch (info->devicetype) {
+ default:
+ return USB_STOR_TRANSPORT_ERROR;
+
+ case USBAT_DEV_HP8200:
us->transport = usbat_hp8200e_transport;
- else if (usbat_get_device_type(us) == USBAT_DEV_FLASH)
+ break;
+
+ case USBAT_DEV_FLASH:
us->transport = usbat_flash_transport;
+ break;
+ }
return 0;
}
@@ -947,7 +959,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
msleep(100);
/* Read the device identification data */
- rc = usbat_read_block(us, reply, 512);
+ rc = usbat_read_block(us, reply, 512, 0);
if (rc != USB_STOR_TRANSPORT_GOOD)
goto leave;
@@ -1031,7 +1043,7 @@ static int usbat_flash_read_data(struct us_data *us,
goto leave;
/* Read the data we just requested */
- result = usbat_read_blocks(us, buffer, len);
+ result = usbat_read_blocks(us, buffer, len, 0);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
@@ -1125,7 +1137,7 @@ static int usbat_flash_write_data(struct us_data *us,
goto leave;
/* Write the data */
- result = usbat_write_blocks(us, buffer, len);
+ result = usbat_write_blocks(us, buffer, len, 0);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
@@ -1310,7 +1322,7 @@ static int usbat_select_and_test_registers(struct us_data *us)
/*
* Initialize the USBAT processor and the storage device
*/
-int init_usbat(struct us_data *us)
+static int init_usbat(struct us_data *us, int devicetype)
{
int rc;
struct usbat_info *info;
@@ -1392,7 +1404,7 @@ int init_usbat(struct us_data *us)
US_DEBUGP("INIT 9\n");
/* At this point, we need to detect which device we are using */
- if (usbat_set_transport(us, info))
+ if (usbat_set_transport(us, info, devicetype))
return USB_STOR_TRANSPORT_ERROR;
US_DEBUGP("INIT 10\n");
@@ -1503,10 +1515,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
* AT SPEED 4 IS UNRELIABLE!!!
*/
- if ( (result = usbat_write_block(us,
+ if ((result = usbat_write_block(us,
USBAT_ATA, srb->cmnd, 12,
- srb->cmnd[0]==GPCMD_BLANK ? 75 : 10)) !=
- USB_STOR_TRANSPORT_GOOD) {
+ (srb->cmnd[0]==GPCMD_BLANK ? 75 : 10), 0) !=
+ USB_STOR_TRANSPORT_GOOD)) {
return result;
}
@@ -1533,7 +1545,7 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
len = *status;
- result = usbat_read_block(us, srb->request_buffer, len);
+ result = usbat_read_block(us, srb->request_buffer, len, srb->use_sg);
/* Debug-print the first 32 bytes of the transfer */
@@ -1695,6 +1707,22 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
return USB_STOR_TRANSPORT_FAILED;
}
+int init_usbat_cd(struct us_data *us)
+{
+ return init_usbat(us, USBAT_DEV_HP8200);
+}
+
+
+int init_usbat_flash(struct us_data *us)
+{
+ return init_usbat(us, USBAT_DEV_FLASH);
+}
+
+int init_usbat_probe(struct us_data *us)
+{
+ return init_usbat(us, 0);
+}
+
/*
* Default transport function. Attempts to detect which transport function
* should be called, makes it the new default, and calls it.
@@ -1708,9 +1736,8 @@ int usbat_transport(struct scsi_cmnd *srb, struct us_data *us)
{
struct usbat_info *info = (struct usbat_info*) (us->extra);
- if (usbat_set_transport(us, info))
+ if (usbat_set_transport(us, info, 0))
return USB_STOR_TRANSPORT_ERROR;
return us->transport(srb, us);
}
-
diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h
index 25e7d8b340b8..3ddf143a1dec 100644
--- a/drivers/usb/storage/shuttle_usbat.h
+++ b/drivers/usb/storage/shuttle_usbat.h
@@ -106,7 +106,9 @@
#define USBAT_FEAT_ET2 0x01
extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int init_usbat(struct us_data *us);
+extern int init_usbat_cd(struct us_data *us);
+extern int init_usbat_flash(struct us_data *us);
+extern int init_usbat_probe(struct us_data *us);
struct usbat_info {
int devicetype;
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 7ca896a342e3..19b25c5cafd4 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -115,19 +115,6 @@ static void usb_stor_blocking_completion(struct urb *urb, struct pt_regs *regs)
complete(urb_done_ptr);
}
-
-/* This is the timeout handler which will cancel an URB when its timeout
- * expires.
- */
-static void timeout_handler(unsigned long us_)
-{
- struct us_data *us = (struct us_data *) us_;
-
- if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->flags)) {
- US_DEBUGP("Timeout -- cancelling URB\n");
- usb_unlink_urb(us->current_urb);
- }
-}
/* This is the common part of the URB message submission code
*
@@ -138,7 +125,7 @@ static void timeout_handler(unsigned long us_)
static int usb_stor_msg_common(struct us_data *us, int timeout)
{
struct completion urb_done;
- struct timer_list to_timer;
+ long timeleft;
int status;
/* don't submit URBs during abort/disconnect processing */
@@ -185,22 +172,17 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
}
}
- /* submit the timeout timer, if a timeout was requested */
- if (timeout > 0) {
- init_timer(&to_timer);
- to_timer.expires = jiffies + timeout;
- to_timer.function = timeout_handler;
- to_timer.data = (unsigned long) us;
- add_timer(&to_timer);
- }
-
/* wait for the completion of the URB */
- wait_for_completion(&urb_done);
- clear_bit(US_FLIDX_URB_ACTIVE, &us->flags);
+ timeleft = wait_for_completion_interruptible_timeout(
+ &urb_done, timeout ? : MAX_SCHEDULE_TIMEOUT);
- /* clean up the timeout timer */
- if (timeout > 0)
- del_timer_sync(&to_timer);
+ clear_bit(US_FLIDX_URB_ACTIVE, &us->flags);
+
+ if (timeleft <= 0) {
+ US_DEBUGP("%s -- cancelling URB\n",
+ timeleft == 0 ? "Timeout" : "Signal");
+ usb_unlink_urb(us->current_urb);
+ }
/* return the URB status */
return us->current_urb->status;
@@ -721,16 +703,19 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
* device reset. */
Handle_Errors:
- /* Let the SCSI layer know we are doing a reset, set the
- * RESETTING bit, and clear the ABORTING bit so that the reset
- * may proceed. */
+ /* Set the RESETTING bit, and clear the ABORTING bit so that
+ * the reset may proceed. */
scsi_lock(us_to_host(us));
- usb_stor_report_bus_reset(us);
set_bit(US_FLIDX_RESETTING, &us->flags);
clear_bit(US_FLIDX_ABORTING, &us->flags);
scsi_unlock(us_to_host(us));
+ /* We must release the device lock because the pre_reset routine
+ * will want to acquire it. */
+ mutex_unlock(&us->dev_mutex);
result = usb_stor_port_reset(us);
+ mutex_lock(&us->dev_mutex);
+
if (result < 0) {
scsi_lock(us_to_host(us));
usb_stor_report_device_reset(us);
@@ -1214,31 +1199,30 @@ int usb_stor_Bulk_reset(struct us_data *us)
0, us->ifnum, NULL, 0);
}
-/* Issue a USB port reset to the device. But don't do anything if
- * there's more than one interface in the device, so that other users
- * are not affected. */
+/* Issue a USB port reset to the device. The caller must not hold
+ * us->dev_mutex.
+ */
int usb_stor_port_reset(struct us_data *us)
{
- int result, rc;
+ int result, rc_lock;
- if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
- result = -EIO;
- US_DEBUGP("No reset during disconnect\n");
- } else if (us->pusb_dev->actconfig->desc.bNumInterfaces != 1) {
- result = -EBUSY;
- US_DEBUGP("Refusing to reset a multi-interface device\n");
- } else {
- result = rc =
- usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
- if (result < 0) {
- US_DEBUGP("unable to lock device for reset: %d\n",
- result);
+ result = rc_lock =
+ usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
+ if (result < 0)
+ US_DEBUGP("unable to lock device for reset: %d\n", result);
+ else {
+ /* Were we disconnected while waiting for the lock? */
+ if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
+ result = -EIO;
+ US_DEBUGP("No reset during disconnect\n");
} else {
- result = usb_reset_device(us->pusb_dev);
- if (rc)
- usb_unlock_device(us->pusb_dev);
- US_DEBUGP("usb_reset_device returns %d\n", result);
+ result = usb_reset_composite_device(
+ us->pusb_dev, us->pusb_intf);
+ US_DEBUGP("usb_reset_composite_device returns %d\n",
+ result);
}
+ if (rc_lock)
+ usb_unlock_device(us->pusb_dev);
}
return result;
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index aec5ea8682d5..543244d421c1 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -78,12 +78,12 @@ UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
"HP",
"CD-Writer+ 8200e",
- US_SC_8070, US_PR_USBAT, init_usbat, 0),
+ US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
"HP",
"CD-Writer+ CD-4e",
- US_SC_8070, US_PR_USBAT, init_usbat, 0),
+ US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
#endif
/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
@@ -133,6 +133,14 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Jiri Slaby <jirislaby@gmail.com> and
+ * Rene C. Castberg <Rene@Castberg.org> */
+UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100,
+ "Nokia",
+ "N80",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
"SMSC",
@@ -216,6 +224,14 @@ UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
"DVD-CAM DZ-MV100A Camcorder",
US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
+/* Patch for Nikon coolpix 2000
+ * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
+UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
+ "NIKON",
+ "NIKON DSC E2000",
+ US_SC_DEVICE, US_PR_DEVICE,NULL,
+ US_FL_NOT_LOCKABLE ),
+
/* Reported by Andreas Bockhold <andreas@bockionline.de> */
UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100,
"NIKON",
@@ -223,13 +239,12 @@ UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
-/* Patch for Nikon coolpix 2000
- * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
-UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
+/* Reported by Jamie Kitson <jamie@staberinde.fsnet.co.uk> */
+UNUSUAL_DEV( 0x04b0, 0x040d, 0x0100, 0x0100,
"NIKON",
- "NIKON DSC E2000",
- US_SC_DEVICE, US_PR_DEVICE,NULL,
- US_FL_NOT_LOCKABLE ),
+ "NIKON DSC D70s",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
/* BENQ DC5330
* Reported by Manuel Fombuena <mfombuena@ya.com> and
@@ -393,7 +408,7 @@ UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
"Shuttle/SCM",
"USBAT-02",
- US_SC_SCSI, US_PR_USBAT, init_usbat,
+ US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
US_FL_SINGLE_LUN),
#endif
@@ -797,7 +812,7 @@ UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009,
UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005,
"Sandisk",
"ImageMate SDDR-05b",
- US_SC_SCSI, US_PR_USBAT, init_usbat,
+ US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
US_FL_SINGLE_LUN ),
#endif
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index dd108634348e..e232c7c89909 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -221,6 +221,37 @@ static int storage_resume(struct usb_interface *iface)
#endif /* CONFIG_PM */
/*
+ * The next two routines get called just before and just after
+ * a USB port reset, whether from this driver or a different one.
+ */
+
+static void storage_pre_reset(struct usb_interface *iface)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ US_DEBUGP("%s\n", __FUNCTION__);
+
+ /* Make sure no command runs during the reset */
+ mutex_lock(&us->dev_mutex);
+}
+
+static void storage_post_reset(struct usb_interface *iface)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ US_DEBUGP("%s\n", __FUNCTION__);
+
+ /* Report the reset to the SCSI core */
+ scsi_lock(us_to_host(us));
+ usb_stor_report_bus_reset(us);
+ scsi_unlock(us_to_host(us));
+
+ /* FIXME: Notify the subdrivers that they need to reinitialize
+ * the device */
+ mutex_unlock(&us->dev_mutex);
+}
+
+/*
* fill_inquiry_response takes an unsigned char array (which must
* be at least 36 characters) and populates the vendor name,
* product name, and revision fields. Then the array is copied
@@ -593,6 +624,15 @@ static int get_transport(struct us_data *us)
break;
#endif
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+ case US_PR_ALAUDA:
+ us->transport_name = "Alauda Control/Bulk";
+ us->transport = alauda_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ us->max_lun = 1;
+ break;
+#endif
+
default:
return -EIO;
}
@@ -648,15 +688,6 @@ static int get_protocol(struct us_data *us)
break;
#endif
-#ifdef CONFIG_USB_STORAGE_ALAUDA
- case US_PR_ALAUDA:
- us->transport_name = "Alauda Control/Bulk";
- us->transport = alauda_transport;
- us->transport_reset = usb_stor_Bulk_reset;
- us->max_lun = 1;
- break;
-#endif
-
default:
return -EIO;
}
@@ -1002,6 +1033,8 @@ static struct usb_driver usb_storage_driver = {
.suspend = storage_suspend,
.resume = storage_resume,
#endif
+ .pre_reset = storage_pre_reset,
+ .post_reset = storage_post_reset,
.id_table = storage_usb_ids,
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 02:53:48 +0000