diff options
Diffstat (limited to 'drivers/scsi')
26 files changed, 1073 insertions, 1436 deletions
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index da5bd33d982d..fc5263c6b102 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -32,6 +32,7 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/sched.h> +#include <linux/dma-mapping.h> #include "scsi.h" #include <scsi/scsi_host.h> #include <linux/libata.h> @@ -289,6 +290,8 @@ static void ahci_host_stop(struct ata_host_set *host_set) { struct ahci_host_priv *hpriv = host_set->private_data; kfree(hpriv); + + ata_host_stop(host_set); } static int ahci_port_start(struct ata_port *ap) diff --git a/drivers/scsi/aic7xxx/aic7770_osm.c b/drivers/scsi/aic7xxx/aic7770_osm.c index c2b47f2bdffd..682ca0b32b44 100644 --- a/drivers/scsi/aic7xxx/aic7770_osm.c +++ b/drivers/scsi/aic7xxx/aic7770_osm.c @@ -41,7 +41,6 @@ #include "aic7xxx_osm.h" -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #include <linux/device.h> #include <linux/eisa.h> @@ -62,13 +61,6 @@ static struct eisa_driver aic7770_driver = { }; typedef struct device *aic7770_dev_t; -#else -#define MINSLOT 1 -#define NUMSLOTS 16 -#define IDOFFSET 0x80 - -typedef void *aic7770_dev_t; -#endif static int aic7770_linux_config(struct aic7770_identity *entry, aic7770_dev_t dev, u_int eisaBase); @@ -76,7 +68,6 @@ static int aic7770_linux_config(struct aic7770_identity *entry, int ahc_linux_eisa_init(void) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) struct eisa_device_id *eid; struct aic7770_identity *id; int i; @@ -110,44 +101,6 @@ ahc_linux_eisa_init(void) eid->sig[0] = 0; return eisa_driver_register(&aic7770_driver); -#else /* LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) */ - struct aic7770_identity *entry; - u_int slot; - u_int eisaBase; - u_int i; - int ret = -ENODEV; - - if (aic7xxx_probe_eisa_vl == 0) - return ret; - - eisaBase = 0x1000 + AHC_EISA_SLOT_OFFSET; - for (slot = 1; slot < NUMSLOTS; eisaBase+=0x1000, slot++) { - uint32_t eisa_id; - size_t id_size; - - if (request_region(eisaBase, AHC_EISA_IOSIZE, "aic7xxx") == 0) - continue; - - eisa_id = 0; - id_size = sizeof(eisa_id); - for (i = 0; i < 4; i++) { - /* VLcards require priming*/ - outb(0x80 + i, eisaBase + IDOFFSET); - eisa_id |= inb(eisaBase + IDOFFSET + i) - << ((id_size-i-1) * 8); - } - release_region(eisaBase, AHC_EISA_IOSIZE); - if (eisa_id & 0x80000000) - continue; /* no EISA card in slot */ - - entry = aic7770_find_device(eisa_id); - if (entry != NULL) { - aic7770_linux_config(entry, NULL, eisaBase); - ret = 0; - } - } - return ret; -#endif } void @@ -187,11 +140,10 @@ aic7770_linux_config(struct aic7770_identity *entry, aic7770_dev_t dev, ahc_free(ahc); return (error); } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) + dev->driver_data = (void *)ahc; if (aic7xxx_detect_complete) error = ahc_linux_register_host(ahc, &aic7xxx_driver_template); -#endif return (error); } @@ -225,7 +177,6 @@ aic7770_map_int(struct ahc_softc *ahc, u_int irq) return (-error); } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) static int aic7770_eisa_dev_probe(struct device *dev) { @@ -261,4 +212,3 @@ aic7770_eisa_dev_remove(struct device *dev) return (0); } -#endif diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 550c9921691a..7c02b7dc7098 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -2488,7 +2488,7 @@ ahd_linux_dv_thread(void *data) sprintf(current->comm, "ahd_dv_%d", ahd->unit); #else daemonize("ahd_dv_%d", ahd->unit); - current->flags |= PF_FREEZE; + current->flags |= PF_NOFREEZE; #endif unlock_kernel(); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index d978e4a3e973..c13e56320010 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -134,11 +134,6 @@ static struct scsi_transport_template *ahc_linux_transport_template = NULL; #include "aiclib.c" #include <linux/init.h> /* __setup */ - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#include "sd.h" /* For geometry detection */ -#endif - #include <linux/mm.h> /* For fetching system memory size */ #include <linux/blkdev.h> /* For block_size() */ #include <linux/delay.h> /* For ssleep/msleep */ @@ -148,11 +143,6 @@ static struct scsi_transport_template *ahc_linux_transport_template = NULL; */ spinlock_t ahc_list_spinlock; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -/* For dynamic sglist size calculation. */ -u_int ahc_linux_nseg; -#endif - /* * Set this to the delay in seconds after SCSI bus reset. * Note, we honor this only for the initial bus reset. @@ -436,15 +426,12 @@ static void ahc_linux_handle_scsi_status(struct ahc_softc *, struct ahc_linux_device *, struct scb *); static void ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, - Scsi_Cmnd *cmd); + struct scsi_cmnd *cmd); static void ahc_linux_sem_timeout(u_long arg); static void ahc_linux_freeze_simq(struct ahc_softc *ahc); static void ahc_linux_release_simq(u_long arg); -static void ahc_linux_dev_timed_unfreeze(u_long arg); -static int ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag); +static int ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag); static void ahc_linux_initialize_scsi_bus(struct ahc_softc *ahc); -static void ahc_linux_size_nseg(void); -static void ahc_linux_thread_run_complete_queue(struct ahc_softc *ahc); static u_int ahc_linux_user_tagdepth(struct ahc_softc *ahc, struct ahc_devinfo *devinfo); static void ahc_linux_device_queue_depth(struct ahc_softc *ahc, @@ -458,54 +445,27 @@ static struct ahc_linux_device* ahc_linux_alloc_device(struct ahc_softc*, u_int); static void ahc_linux_free_device(struct ahc_softc*, struct ahc_linux_device*); -static void ahc_linux_run_device_queue(struct ahc_softc*, - struct ahc_linux_device*); +static int ahc_linux_run_command(struct ahc_softc*, + struct ahc_linux_device *, + struct scsi_cmnd *); static void ahc_linux_setup_tag_info_global(char *p); static aic_option_callback_t ahc_linux_setup_tag_info; static int aic7xxx_setup(char *s); static int ahc_linux_next_unit(void); -static void ahc_runq_tasklet(unsigned long data); -static struct ahc_cmd *ahc_linux_run_complete_queue(struct ahc_softc *ahc); /********************************* Inlines ************************************/ -static __inline void ahc_schedule_runq(struct ahc_softc *ahc); static __inline struct ahc_linux_device* ahc_linux_get_device(struct ahc_softc *ahc, u_int channel, - u_int target, u_int lun, int alloc); -static __inline void ahc_schedule_completeq(struct ahc_softc *ahc); -static __inline void ahc_linux_check_device_queue(struct ahc_softc *ahc, - struct ahc_linux_device *dev); -static __inline struct ahc_linux_device * - ahc_linux_next_device_to_run(struct ahc_softc *ahc); -static __inline void ahc_linux_run_device_queues(struct ahc_softc *ahc); + u_int target, u_int lun); static __inline void ahc_linux_unmap_scb(struct ahc_softc*, struct scb*); static __inline int ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb, struct ahc_dma_seg *sg, dma_addr_t addr, bus_size_t len); -static __inline void -ahc_schedule_completeq(struct ahc_softc *ahc) -{ - if ((ahc->platform_data->flags & AHC_RUN_CMPLT_Q_TIMER) == 0) { - ahc->platform_data->flags |= AHC_RUN_CMPLT_Q_TIMER; - ahc->platform_data->completeq_timer.expires = jiffies; - add_timer(&ahc->platform_data->completeq_timer); - } -} - -/* - * Must be called with our lock held. - */ -static __inline void -ahc_schedule_runq(struct ahc_softc *ahc) -{ - tasklet_schedule(&ahc->platform_data->runq_tasklet); -} - static __inline struct ahc_linux_device* ahc_linux_get_device(struct ahc_softc *ahc, u_int channel, u_int target, - u_int lun, int alloc) + u_int lun) { struct ahc_linux_target *targ; struct ahc_linux_device *dev; @@ -515,102 +475,15 @@ ahc_linux_get_device(struct ahc_softc *ahc, u_int channel, u_int target, if (channel != 0) target_offset += 8; targ = ahc->platform_data->targets[target_offset]; - if (targ == NULL) { - if (alloc != 0) { - targ = ahc_linux_alloc_target(ahc, channel, target); - if (targ == NULL) - return (NULL); - } else - return (NULL); - } + BUG_ON(targ == NULL); dev = targ->devices[lun]; - if (dev == NULL && alloc != 0) - dev = ahc_linux_alloc_device(ahc, targ, lun); - return (dev); -} - -#define AHC_LINUX_MAX_RETURNED_ERRORS 4 -static struct ahc_cmd * -ahc_linux_run_complete_queue(struct ahc_softc *ahc) -{ - struct ahc_cmd *acmd; - u_long done_flags; - int with_errors; - - with_errors = 0; - ahc_done_lock(ahc, &done_flags); - while ((acmd = TAILQ_FIRST(&ahc->platform_data->completeq)) != NULL) { - Scsi_Cmnd *cmd; - - if (with_errors > AHC_LINUX_MAX_RETURNED_ERRORS) { - /* - * Linux uses stack recursion to requeue - * commands that need to be retried. Avoid - * blowing out the stack by "spoon feeding" - * commands that completed with error back - * the operating system in case they are going - * to be retried. "ick" - */ - ahc_schedule_completeq(ahc); - break; - } - TAILQ_REMOVE(&ahc->platform_data->completeq, - acmd, acmd_links.tqe); - cmd = &acmd_scsi_cmd(acmd); - cmd->host_scribble = NULL; - if (ahc_cmd_get_transaction_status(cmd) != DID_OK - || (cmd->result & 0xFF) != SCSI_STATUS_OK) - with_errors++; - - cmd->scsi_done(cmd); - } - ahc_done_unlock(ahc, &done_flags); - return (acmd); -} - -static __inline void -ahc_linux_check_device_queue(struct ahc_softc *ahc, - struct ahc_linux_device *dev) -{ - if ((dev->flags & AHC_DEV_FREEZE_TIL_EMPTY) != 0 - && dev->active == 0) { - dev->flags &= ~AHC_DEV_FREEZE_TIL_EMPTY; - dev->qfrozen--; - } - - if (TAILQ_FIRST(&dev->busyq) == NULL - || dev->openings == 0 || dev->qfrozen != 0) - return; - - ahc_linux_run_device_queue(ahc, dev); -} - -static __inline struct ahc_linux_device * -ahc_linux_next_device_to_run(struct ahc_softc *ahc) -{ - - if ((ahc->flags & AHC_RESOURCE_SHORTAGE) != 0 - || (ahc->platform_data->qfrozen != 0)) - return (NULL); - return (TAILQ_FIRST(&ahc->platform_data->device_runq)); -} - -static __inline void -ahc_linux_run_device_queues(struct ahc_softc *ahc) -{ - struct ahc_linux_device *dev; - - while ((dev = ahc_linux_next_device_to_run(ahc)) != NULL) { - TAILQ_REMOVE(&ahc->platform_data->device_runq, dev, links); - dev->flags &= ~AHC_DEV_ON_RUN_LIST; - ahc_linux_check_device_queue(ahc, dev); - } + return dev; } static __inline void ahc_linux_unmap_scb(struct ahc_softc *ahc, struct scb *scb) { - Scsi_Cmnd *cmd; + struct scsi_cmnd *cmd; cmd = scb->io_ctx; ahc_sync_sglist(ahc, scb, BUS_DMASYNC_POSTWRITE); @@ -650,109 +523,15 @@ ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb, return (consumed); } -/************************ Host template entry points *************************/ -static int ahc_linux_detect(Scsi_Host_Template *); -static int ahc_linux_queue(Scsi_Cmnd *, void (*)(Scsi_Cmnd *)); -static const char *ahc_linux_info(struct Scsi_Host *); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) -static int ahc_linux_slave_alloc(Scsi_Device *); -static int ahc_linux_slave_configure(Scsi_Device *); -static void ahc_linux_slave_destroy(Scsi_Device *); -#if defined(__i386__) -static int ahc_linux_biosparam(struct scsi_device*, - struct block_device*, - sector_t, int[]); -#endif -#else -static int ahc_linux_release(struct Scsi_Host *); -static void ahc_linux_select_queue_depth(struct Scsi_Host *host, - Scsi_Device *scsi_devs); -#if defined(__i386__) -static int ahc_linux_biosparam(Disk *, kdev_t, int[]); -#endif -#endif -static int ahc_linux_bus_reset(Scsi_Cmnd *); -static int ahc_linux_dev_reset(Scsi_Cmnd *); -static int ahc_linux_abort(Scsi_Cmnd *); - -/* - * Calculate a safe value for AHC_NSEG (as expressed through ahc_linux_nseg). - * - * In pre-2.5.X... - * The midlayer allocates an S/G array dynamically when a command is issued - * using SCSI malloc. This array, which is in an OS dependent format that - * must later be copied to our private S/G list, is sized to house just the - * number of segments needed for the current transfer. Since the code that - * sizes the SCSI malloc pool does not take into consideration fragmentation - * of the pool, executing transactions numbering just a fraction of our - * concurrent transaction limit with list lengths aproaching AHC_NSEG will - * quickly depleat the SCSI malloc pool of usable space. Unfortunately, the - * mid-layer does not properly handle this scsi malloc failures for the S/G - * array and the result can be a lockup of the I/O subsystem. We try to size - * our S/G list so that it satisfies our drivers allocation requirements in - * addition to avoiding fragmentation of the SCSI malloc pool. - */ -static void -ahc_linux_size_nseg(void) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - u_int cur_size; - u_int best_size; - - /* - * The SCSI allocator rounds to the nearest 512 bytes - * an cannot allocate across a page boundary. Our algorithm - * is to start at 1K of scsi malloc space per-command and - * loop through all factors of the PAGE_SIZE and pick the best. - */ - best_size = 0; - for (cur_size = 1024; cur_size <= PAGE_SIZE; cur_size *= 2) { - u_int nseg; - - nseg = cur_size / sizeof(struct scatterlist); - if (nseg < AHC_LINUX_MIN_NSEG) - continue; - - if (best_size == 0) { - best_size = cur_size; - ahc_linux_nseg = nseg; - } else { - u_int best_rem; - u_int cur_rem; - - /* - * Compare the traits of the current "best_size" - * with the current size to determine if the - * current size is a better size. - */ - best_rem = best_size % sizeof(struct scatterlist); - cur_rem = cur_size % sizeof(struct scatterlist); - if (cur_rem < best_rem) { - best_size = cur_size; - ahc_linux_nseg = nseg; - } - } - } -#endif -} - /* * Try to detect an Adaptec 7XXX controller. */ static int -ahc_linux_detect(Scsi_Host_Template *template) +ahc_linux_detect(struct scsi_host_template *template) { struct ahc_softc *ahc; int found = 0; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - /* - * It is a bug that the upper layer takes - * this lock just prior to calling us. - */ - spin_unlock_irq(&io_request_lock); -#endif - /* * Sanity checking of Linux SCSI data structures so * that some of our hacks^H^H^H^H^Hassumptions aren't @@ -764,7 +543,6 @@ ahc_linux_detect(Scsi_Host_Template *template) printf("ahc_linux_detect: Unable to attach\n"); return (0); } - ahc_linux_size_nseg(); /* * If we've been passed any parameters, process them now. */ @@ -793,48 +571,11 @@ ahc_linux_detect(Scsi_Host_Template *template) found++; } -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - spin_lock_irq(&io_request_lock); -#endif aic7xxx_detect_complete++; return (found); } -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -/* - * Free the passed in Scsi_Host memory structures prior to unloading the - * module. - */ -int -ahc_linux_release(struct Scsi_Host * host) -{ - struct ahc_softc *ahc; - u_long l; - - ahc_list_lock(&l); - if (host != NULL) { - - /* - * We should be able to just perform - * the free directly, but check our - * list for extra sanity. - */ - ahc = ahc_find_softc(*(struct ahc_softc **)host->hostdata); - if (ahc != NULL) { - u_long s; - - ahc_lock(ahc, &s); - ahc_intr_enable(ahc, FALSE); - ahc_unlock(ahc, &s); - ahc_free(ahc); - } - } - ahc_list_unlock(&l); - return (0); -} -#endif - /* * Return a string describing the driver. */ @@ -867,11 +608,10 @@ ahc_linux_info(struct Scsi_Host *host) * Queue an SCB to the controller. */ static int -ahc_linux_queue(Scsi_Cmnd * cmd, void (*scsi_done) (Scsi_Cmnd *)) +ahc_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *)) { struct ahc_softc *ahc; struct ahc_linux_device *dev; - u_long flags; ahc = *(struct ahc_softc **)cmd->device->host->hostdata; @@ -880,205 +620,152 @@ ahc_linux_queue(Scsi_Cmnd * cmd, void (*scsi_done) (Scsi_Cmnd *)) */ cmd->scsi_done = scsi_done; - ahc_midlayer_entrypoint_lock(ahc, &flags); - /* * Close the race of a command that was in the process of * being queued to us just as our simq was frozen. Let * DV commands through so long as we are only frozen to * perform DV. */ - if (ahc->platform_data->qfrozen != 0) { + if (ahc->platform_data->qfrozen != 0) + return SCSI_MLQUEUE_HOST_BUSY; - ahc_cmd_set_transaction_status(cmd, CAM_REQUEUE_REQ); - ahc_linux_queue_cmd_complete(ahc, cmd); - ahc_schedule_completeq(ahc); - ahc_midlayer_entrypoint_unlock(ahc, &flags); - return (0); - } dev = ahc_linux_get_device(ahc, cmd->device->channel, cmd->device->id, - cmd->device->lun, /*alloc*/TRUE); - if (dev == NULL) { - ahc_cmd_set_transaction_status(cmd, CAM_RESRC_UNAVAIL); - ahc_linux_queue_cmd_complete(ahc, cmd); - ahc_schedule_completeq(ahc); - ahc_midlayer_entrypoint_unlock(ahc, &flags); - printf("%s: aic7xxx_linux_queue - Unable to allocate device!\n", - ahc_name(ahc)); - return (0); - } + cmd->device->lun); + BUG_ON(dev == NULL); + cmd->result = CAM_REQ_INPROG << 16; - TAILQ_INSERT_TAIL(&dev->busyq, (struct ahc_cmd *)cmd, acmd_links.tqe); - if ((dev->flags & AHC_DEV_ON_RUN_LIST) == 0) { - TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, dev, links); - dev->flags |= AHC_DEV_ON_RUN_LIST; - ahc_linux_run_device_queues(ahc); - } - ahc_midlayer_entrypoint_unlock(ahc, &flags); - return (0); + + return ahc_linux_run_command(ahc, dev, cmd); } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) static int -ahc_linux_slave_alloc(Scsi_Device *device) +ahc_linux_slave_alloc(struct scsi_device *device) { struct ahc_softc *ahc; + struct ahc_linux_target *targ; + struct scsi_target *starget = device->sdev_target; + struct ahc_linux_device *dev; + unsigned int target_offset; + unsigned long flags; + int retval = -ENOMEM; + + target_offset = starget->id; + if (starget->channel != 0) + target_offset += 8; ahc = *((struct ahc_softc **)device->host->hostdata); if (bootverbose) printf("%s: Slave Alloc %d\n", ahc_name(ahc), device->id); - return (0); + ahc_lock(ahc, &flags); + targ = ahc->platform_data->targets[target_offset]; + if (targ == NULL) { + struct seeprom_config *sc; + + targ = ahc_linux_alloc_target(ahc, starget->channel, + starget->id); + sc = ahc->seep_config; + if (targ == NULL) + goto out; + + if (sc) { + unsigned short scsirate; + struct ahc_devinfo devinfo; + struct ahc_initiator_tinfo *tinfo; + struct ahc_tmode_tstate *tstate; + char channel = starget->channel + 'A'; + unsigned int our_id = ahc->our_id; + + if (starget->channel) + our_id = ahc->our_id_b; + + if ((ahc->features & AHC_ULTRA2) != 0) { + scsirate = sc->device_flags[target_offset] & CFXFER; + } else { + scsirate = (sc->device_flags[target_offset] & CFXFER) << 4; + if (sc->device_flags[target_offset] & CFSYNCH) + scsirate |= SOFS; + } + if (sc->device_flags[target_offset] & CFWIDEB) { + scsirate |= WIDEXFER; + spi_max_width(starget) = 1; + } else + spi_max_width(starget) = 0; + spi_min_period(starget) = + ahc_find_period(ahc, scsirate, AHC_SYNCRATE_DT); + tinfo = ahc_fetch_transinfo(ahc, channel, ahc->our_id, + targ->target, &tstate); + ahc_compile_devinfo(&devinfo, our_id, targ->target, + CAM_LUN_WILDCARD, channel, + ROLE_INITIATOR); + ahc_set_syncrate(ahc, &devinfo, NULL, 0, 0, 0, + AHC_TRANS_GOAL, /*paused*/FALSE); + ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, + AHC_TRANS_GOAL, /*paused*/FALSE); + } + + } + dev = targ->devices[device->lun]; + if (dev == NULL) { + dev = ahc_linux_alloc_device(ahc, targ, device->lun); + if (dev == NULL) + goto out; + } + retval = 0; + + out: + ahc_unlock(ahc, &flags); + return retval; } static int -ahc_linux_slave_configure(Scsi_Device *device) +ahc_linux_slave_configure(struct scsi_device *device) { struct ahc_softc *ahc; struct ahc_linux_device *dev; - u_long flags; ahc = *((struct ahc_softc **)device->host->hostdata); + if (bootverbose) printf("%s: Slave Configure %d\n", ahc_name(ahc), device->id); - ahc_midlayer_entrypoint_lock(ahc, &flags); - /* - * Since Linux has attached to the device, configure - * it so we don't free and allocate the device - * structure on every command. - */ - dev = ahc_linux_get_device(ahc, device->channel, - device->id, device->lun, - /*alloc*/TRUE); - if (dev != NULL) { - dev->flags &= ~AHC_DEV_UNCONFIGURED; - dev->scsi_device = device; - ahc_linux_device_queue_depth(ahc, dev); - } - ahc_midlayer_entrypoint_unlock(ahc, &flags); + + dev = ahc_linux_get_device(ahc, device->channel, device->id, + device->lun); + dev->scsi_device = device; + ahc_linux_device_queue_depth(ahc, dev); /* Initial Domain Validation */ if (!spi_initial_dv(device->sdev_target)) spi_dv_device(device); - return (0); + return 0; } static void -ahc_linux_slave_destroy(Scsi_Device *device) +ahc_linux_slave_destroy(struct scsi_device *device) { struct ahc_softc *ahc; struct ahc_linux_device *dev; - u_long flags; ahc = *((struct ahc_softc **)device->host->hostdata); if (bootverbose) printf("%s: Slave Destroy %d\n", ahc_name(ahc), device->id); - ahc_midlayer_entrypoint_lock(ahc, &flags); dev = ahc_linux_get_device(ahc, device->channel, - device->id, device->lun, - /*alloc*/FALSE); - /* - * Filter out "silly" deletions of real devices by only - * deleting devices that have had slave_configure() - * called on them. All other devices that have not - * been configured will automatically be deleted by - * the refcounting process. - */ - if (dev != NULL - && (dev->flags & AHC_DEV_SLAVE_CONFIGURED) != 0) { - dev->flags |= AHC_DEV_UNCONFIGURED; - if (TAILQ_EMPTY(&dev->busyq) - && dev->active == 0 - && (dev->flags & AHC_DEV_TIMER_ACTIVE) == 0) - ahc_linux_free_device(ahc, dev); - } - ahc_midlayer_entrypoint_unlock(ahc, &flags); -} -#else -/* - * Sets the queue depth for each SCSI device hanging - * off the input host adapter. - */ -static void -ahc_linux_select_queue_depth(struct Scsi_Host *host, Scsi_Device *scsi_devs) -{ - Scsi_Device *device; - Scsi_Device *ldev; - struct ahc_softc *ahc; - u_long flags; + device->id, device->lun); - ahc = *((struct ahc_softc **)host->hostdata); - ahc_lock(ahc, &flags); - for (device = scsi_devs; device != NULL; device = device->next) { + BUG_ON(dev->active); - /* - * Watch out for duplicate devices. This works around - * some quirks in how the SCSI scanning code does its - * device management. - */ - for (ldev = scsi_devs; ldev != device; ldev = ldev->next) { - if (ldev->host == device->host - && ldev->channel == device->channel - && ldev->id == device->id - && ldev->lun == device->lun) - break; - } - /* Skip duplicate. */ - if (ldev != device) - continue; - - if (device->host == host) { - struct ahc_linux_device *dev; - - /* - * Since Linux has attached to the device, configure - * it so we don't free and allocate the device - * structure on every command. - */ - dev = ahc_linux_get_device(ahc, device->channel, - device->id, device->lun, - /*alloc*/TRUE); - if (dev != NULL) { - dev->flags &= ~AHC_DEV_UNCONFIGURED; - dev->scsi_device = device; - ahc_linux_device_queue_depth(ahc, dev); - device->queue_depth = dev->openings - + dev->active; - if ((dev->flags & (AHC_DEV_Q_BASIC - | AHC_DEV_Q_TAGGED)) == 0) { - /* - * We allow the OS to queue 2 untagged - * transactions to us at any time even - * though we can only execute them - * serially on the controller/device. - * This should remove some latency. - */ - device->queue_depth = 2; - } - } - } - } - ahc_unlock(ahc, &flags); + ahc_linux_free_device(ahc, dev); } -#endif #if defined(__i386__) /* * Return the disk geometry for the given SCSI device. */ static int -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ahc_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]) { uint8_t *bh; -#else -ahc_linux_biosparam(Disk *disk, kdev_t dev, int geom[]) -{ - struct scsi_device *sdev = disk->device; - u_long capacity = disk->capacity; - struct buffer_head *bh; -#endif int heads; int sectors; int cylinders; @@ -1090,22 +777,11 @@ ahc_linux_biosparam(Disk *disk, kdev_t dev, int geom[]) ahc = *((struct ahc_softc **)sdev->host->hostdata); channel = sdev->channel; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) bh = scsi_bios_ptable(bdev); -#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,17) - bh = bread(MKDEV(MAJOR(dev), MINOR(dev) & ~0xf), 0, block_size(dev)); -#else - bh = bread(MKDEV(MAJOR(dev), MINOR(dev) & ~0xf), 0, 1024); -#endif - if (bh) { ret = scsi_partsize(bh, capacity, &geom[2], &geom[0], &geom[1]); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) kfree(bh); -#else - brelse(bh); -#endif if (ret != -1) return (ret); } @@ -1135,7 +811,7 @@ ahc_linux_biosparam(Disk *disk, kdev_t dev, int geom[]) * Abort the current SCSI command(s). */ static int -ahc_linux_abort(Scsi_Cmnd *cmd) +ahc_linux_abort(struct scsi_cmnd *cmd) { int error; @@ -1149,7 +825,7 @@ ahc_linux_abort(Scsi_Cmnd *cmd) * Attempt to send a target reset message to the device that timed out. */ static int -ahc_linux_dev_reset(Scsi_Cmnd *cmd) +ahc_linux_dev_reset(struct scsi_cmnd *cmd) { int error; @@ -1163,18 +839,14 @@ ahc_linux_dev_reset(Scsi_Cmnd *cmd) * Reset the SCSI bus. */ static int -ahc_linux_bus_reset(Scsi_Cmnd *cmd) +ahc_linux_bus_reset(struct scsi_cmnd *cmd) { struct ahc_softc *ahc; - u_long s; int found; ahc = *(struct ahc_softc **)cmd->device->host->hostdata; - ahc_midlayer_entrypoint_lock(ahc, &s); found = ahc_reset_channel(ahc, cmd->device->channel + 'A', /*initiate reset*/TRUE); - ahc_linux_run_complete_queue(ahc); - ahc_midlayer_entrypoint_unlock(ahc, &s); if (bootverbose) printf("%s: SCSI bus reset delivered. " @@ -1183,7 +855,7 @@ ahc_linux_bus_reset(Scsi_Cmnd *cmd) return SUCCESS; } -Scsi_Host_Template aic7xxx_driver_template = { +struct scsi_host_template aic7xxx_driver_template = { .module = THIS_MODULE, .name = "aic7xxx", .proc_info = ahc_linux_proc_info, @@ -1206,33 +878,6 @@ Scsi_Host_Template aic7xxx_driver_template = { /**************************** Tasklet Handler *********************************/ -/* - * In 2.4.X and above, this routine is called from a tasklet, - * so we must re-acquire our lock prior to executing this code. - * In all prior kernels, ahc_schedule_runq() calls this routine - * directly and ahc_schedule_runq() is called with our lock held. - */ -static void -ahc_runq_tasklet(unsigned long data) -{ - struct ahc_softc* ahc; - struct ahc_linux_device *dev; - u_long flags; - - ahc = (struct ahc_softc *)data; - ahc_lock(ahc, &flags); - while ((dev = ahc_linux_next_device_to_run(ahc)) != NULL) { - - TAILQ_REMOVE(&ahc->platform_data->device_runq, dev, links); - dev->flags &= ~AHC_DEV_ON_RUN_LIST; - ahc_linux_check_device_queue(ahc, dev); - /* Yeild to our interrupt handler */ - ahc_unlock(ahc, &flags); - ahc_lock(ahc, &flags); - } - ahc_unlock(ahc, &flags); -} - /******************************** Macros **************************************/ #define BUILD_SCSIID(ahc, cmd) \ ((((cmd)->device->id << TID_SHIFT) & TID) \ @@ -1278,37 +923,11 @@ int ahc_dmamem_alloc(struct ahc_softc *ahc, bus_dma_tag_t dmat, void** vaddr, int flags, bus_dmamap_t *mapp) { - bus_dmamap_t map; - - map = malloc(sizeof(*map), M_DEVBUF, M_NOWAIT); - if (map == NULL) - return (ENOMEM); - /* - * Although we can dma data above 4GB, our - * "consistent" memory is below 4GB for - * space efficiency reasons (only need a 4byte - * address). For this reason, we have to reset - * our dma mask when doing allocations. - */ - if (ahc->dev_softc != NULL) - if (pci_set_dma_mask(ahc->dev_softc, 0xFFFFFFFF)) { - printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n"); - kfree(map); - return (ENODEV); - } *vaddr = pci_alloc_consistent(ahc->dev_softc, - dmat->maxsize, &map->bus_addr); - if (ahc->dev_softc != NULL) - if (pci_set_dma_mask(ahc->dev_softc, - ahc->platform_data->hw_dma_mask)) { - printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n"); - kfree(map); - return (ENODEV); - } + dmat->maxsize, mapp); if (*vaddr == NULL) - return (ENOMEM); - *mapp = map; - return(0); + return ENOMEM; + return 0; } void @@ -1316,7 +935,7 @@ ahc_dmamem_free(struct ahc_softc *ahc, bus_dma_tag_t dmat, void* vaddr, bus_dmamap_t map) { pci_free_consistent(ahc->dev_softc, dmat->maxsize, - vaddr, map->bus_addr); + vaddr, map); } int @@ -1330,7 +949,7 @@ ahc_dmamap_load(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map, */ bus_dma_segment_t stack_sg; - stack_sg.ds_addr = map->bus_addr; + stack_sg.ds_addr = map; stack_sg.ds_len = dmat->maxsize; cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0); return (0); @@ -1339,12 +958,6 @@ ahc_dmamap_load(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map, void ahc_dmamap_destroy(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map) { - /* - * The map may is NULL in our < 2.3.X implementation. - * Now it's 2.6.5, but just in case... - */ - BUG_ON(map == NULL); - free(map, M_DEVBUF); } int @@ -1550,7 +1163,7 @@ __setup("aic7xxx=", aic7xxx_setup); uint32_t aic7xxx_verbose; int -ahc_linux_register_host(struct ahc_softc *ahc, Scsi_Host_Template *template) +ahc_linux_register_host(struct ahc_softc *ahc, struct scsi_host_template *template) { char buf[80]; struct Scsi_Host *host; @@ -1564,11 +1177,7 @@ ahc_linux_register_host(struct ahc_softc *ahc, Scsi_Host_Template *template) *((struct ahc_softc **)host->hostdata) = ahc; ahc_lock(ahc, &s); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) scsi_assign_lock(host, &ahc->platform_data->spin_lock); -#elif AHC_SCSI_HAS_HOST_LOCK != 0 - host->lock = &ahc->platform_data->spin_lock; -#endif ahc->platform_data->host = host; host->can_queue = AHC_MAX_QUEUE; host->cmd_per_lun = 2; @@ -1587,19 +1196,14 @@ ahc_linux_register_host(struct ahc_softc *ahc, Scsi_Host_Template *template) ahc_set_name(ahc, new_name); } host->unique_id = ahc->unit; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - scsi_set_pci_device(host, ahc->dev_softc); -#endif ahc_linux_initialize_scsi_bus(ahc); ahc_intr_enable(ahc, TRUE); ahc_unlock(ahc, &s); host->transportt = ahc_linux_transport_template; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) scsi_add_host(host, (ahc->dev_softc ? &ahc->dev_softc->dev : NULL)); /* XXX handle failure */ scsi_scan_host(host); -#endif return (0); } @@ -1717,19 +1321,9 @@ ahc_platform_alloc(struct ahc_softc *ahc, void *platform_arg) if (ahc->platform_data == NULL) return (ENOMEM); memset(ahc->platform_data, 0, sizeof(struct ahc_platform_data)); - TAILQ_INIT(&ahc->platform_data->completeq); - TAILQ_INIT(&ahc->platform_data->device_runq); ahc->platform_data->irq = AHC_LINUX_NOIRQ; - ahc->platform_data->hw_dma_mask = 0xFFFFFFFF; ahc_lockinit(ahc); - ahc_done_lockinit(ahc); - init_timer(&ahc->platform_data->completeq_timer); - ahc->platform_data->completeq_timer.data = (u_long)ahc; - ahc->platform_data->completeq_timer.function = - (ahc_linux_callback_t *)ahc_linux_thread_run_complete_queue; init_MUTEX_LOCKED(&ahc->platform_data->eh_sem); - tasklet_init(&ahc->platform_data->runq_tasklet, ahc_runq_tasklet, - (unsigned long)ahc); ahc->seltime = (aic7xxx_seltime & 0x3) << 4; ahc->seltime_b = (aic7xxx_seltime & 0x3) << 4; if (aic7xxx_pci_parity == 0) @@ -1746,12 +1340,8 @@ ahc_platform_free(struct ahc_softc *ahc) int i, j; if (ahc->platform_data != NULL) { - del_timer_sync(&ahc->platform_data->completeq_timer); - tasklet_kill(&ahc->platform_data->runq_tasklet); if (ahc->platform_data->host != NULL) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) scsi_remove_host(ahc->platform_data->host); -#endif scsi_host_put(ahc->platform_data->host); } @@ -1787,16 +1377,7 @@ ahc_platform_free(struct ahc_softc *ahc) release_mem_region(ahc->platform_data->mem_busaddr, 0x1000); } -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - /* - * In 2.4 we detach from the scsi midlayer before the PCI - * layer invokes our remove callback. No per-instance - * detach is provided, so we must reach inside the PCI - * subsystem's internals and detach our driver manually. - */ - if (ahc->dev_softc != NULL) - ahc->dev_softc->driver = NULL; -#endif + free(ahc->platform_data, M_DEVBUF); } } @@ -1820,7 +1401,7 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, dev = ahc_linux_get_device(ahc, devinfo->channel - 'A', devinfo->target, - devinfo->lun, /*alloc*/FALSE); + devinfo->lun); if (dev == NULL) return; was_queuing = dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED); @@ -1873,7 +1454,6 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, dev->maxtags = 0; dev->openings = 1 - dev->active; } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) if (dev->scsi_device != NULL) { switch ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED))) { case AHC_DEV_Q_BASIC: @@ -1899,90 +1479,13 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, break; } } -#endif } int ahc_platform_abort_scbs(struct ahc_softc *ahc, int target, char channel, int lun, u_int tag, role_t role, uint32_t status) { - int chan; - int maxchan; - int targ; - int maxtarg; - int clun; - int maxlun; - int count; - - if (tag != SCB_LIST_NULL) - return (0); - - chan = 0; - if (channel != ALL_CHANNELS) { - chan = channel - 'A'; - maxchan = chan + 1; - } else { - maxchan = (ahc->features & AHC_TWIN) ? 2 : 1; - } - targ = 0; - if (target != CAM_TARGET_WILDCARD) { - targ = target; - maxtarg = targ + 1; - } else { - maxtarg = (ahc->features & AHC_WIDE) ? 16 : 8; - } - clun = 0; - if (lun != CAM_LUN_WILDCARD) { - clun = lun; - maxlun = clun + 1; - } else { - maxlun = AHC_NUM_LUNS; - } - - count = 0; - for (; chan < maxchan; chan++) { - - for (; targ < maxtarg; targ++) { - - for (; clun < maxlun; clun++) { - struct ahc_linux_device *dev; - struct ahc_busyq *busyq; - struct ahc_cmd *acmd; - - dev = ahc_linux_get_device(ahc, chan, - targ, clun, - /*alloc*/FALSE); - if (dev == NULL) - continue; - - busyq = &dev->busyq; - while ((acmd = TAILQ_FIRST(busyq)) != NULL) { - Scsi_Cmnd *cmd; - - cmd = &acmd_scsi_cmd(acmd); - TAILQ_REMOVE(busyq, acmd, - acmd_links.tqe); - count++; - cmd->result = status << 16; - ahc_linux_queue_cmd_complete(ahc, cmd); - } - } - } - } - - return (count); -} - -static void -ahc_linux_thread_run_complete_queue(struct ahc_softc *ahc) -{ - u_long flags; - - ahc_lock(ahc, &flags); - del_timer(&ahc->platform_data->completeq_timer); - ahc->platform_data->flags &= ~AHC_RUN_CMPLT_Q_TIMER; - ahc_linux_run_complete_queue(ahc); - ahc_unlock(ahc, &flags); + return 0; } static u_int @@ -2045,213 +1548,200 @@ ahc_linux_device_queue_depth(struct ahc_softc *ahc, } } -static void -ahc_linux_run_device_queue(struct ahc_softc *ahc, struct ahc_linux_device *dev) +static int +ahc_linux_run_command(struct ahc_softc *ahc, struct ahc_linux_device *dev, + struct scsi_cmnd *cmd) { - struct ahc_cmd *acmd; - struct scsi_cmnd *cmd; struct scb *scb; struct hardware_scb *hscb; struct ahc_initiator_tinfo *tinfo; struct ahc_tmode_tstate *tstate; uint16_t mask; + struct scb_tailq *untagged_q = NULL; - if ((dev->flags & AHC_DEV_ON_RUN_LIST) != 0) - panic("running device on run list"); + /* + * Schedule us to run later. The only reason we are not + * running is because the whole controller Q is frozen. + */ + if (ahc->platform_data->qfrozen != 0) + return SCSI_MLQUEUE_HOST_BUSY; - while ((acmd = TAILQ_FIRST(&dev->busyq)) != NULL - && dev->openings > 0 && dev->qfrozen == 0) { + /* + * We only allow one untagged transaction + * per target in the initiator role unless + * we are storing a full busy target *lun* + * table in SCB space. + */ + if (!blk_rq_tagged(cmd->request) + && (ahc->features & AHC_SCB_BTT) == 0) { + int target_offset; - /* - * Schedule us to run later. The only reason we are not - * running is because the whole controller Q is frozen. - */ - if (ahc->platform_data->qfrozen != 0) { - TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, - dev, links); - dev->flags |= AHC_DEV_ON_RUN_LIST; - return; - } - /* - * Get an scb to use. - */ - if ((scb = ahc_get_scb(ahc)) == NULL) { - TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, - dev, links); - dev->flags |= AHC_DEV_ON_RUN_LIST; - ahc->flags |= AHC_RESOURCE_SHORTAGE; - return; - } - TAILQ_REMOVE(&dev->busyq, acmd, acmd_links.tqe); - cmd = &acmd_scsi_cmd(acmd); - scb->io_ctx = cmd; - scb->platform_data->dev = dev; - hscb = scb->hscb; - cmd->host_scribble = (char *)scb; + target_offset = cmd->device->id + cmd->device->channel * 8; + untagged_q = &(ahc->untagged_queues[target_offset]); + if (!TAILQ_EMPTY(untagged_q)) + /* if we're already executing an untagged command + * we're busy to another */ + return SCSI_MLQUEUE_DEVICE_BUSY; + } - /* - * Fill out basics of the HSCB. - */ - hscb->control = 0; - hscb->scsiid = BUILD_SCSIID(ahc, cmd); - hscb->lun = cmd->device->lun; - mask = SCB_GET_TARGET_MASK(ahc, scb); - tinfo = ahc_fetch_transinfo(ahc, SCB_GET_CHANNEL(ahc, scb), - SCB_GET_OUR_ID(scb), - SCB_GET_TARGET(ahc, scb), &tstate); - hscb->scsirate = tinfo->scsirate; - hscb->scsioffset = tinfo->curr.offset; - if ((tstate->ultraenb & mask) != 0) - hscb->control |= ULTRAENB; - - if ((ahc->user_discenable & mask) != 0) - hscb->control |= DISCENB; - - if ((tstate->auto_negotiate & mask) != 0) { - scb->flags |= SCB_AUTO_NEGOTIATE; - scb->hscb->control |= MK_MESSAGE; - } + /* + * Get an scb to use. + */ + if ((scb = ahc_get_scb(ahc)) == NULL) { + ahc->flags |= AHC_RESOURCE_SHORTAGE; + return SCSI_MLQUEUE_HOST_BUSY; + } - if ((dev->flags & (AHC_DEV_Q_TAGGED|AHC_DEV_Q_BASIC)) != 0) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - int msg_bytes; - uint8_t tag_msgs[2]; + scb->io_ctx = cmd; + scb->platform_data->dev = dev; + hscb = scb->hscb; + cmd->host_scribble = (char *)scb; - msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs); - if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) { - hscb->control |= tag_msgs[0]; - if (tag_msgs[0] == MSG_ORDERED_TASK) - dev->commands_since_idle_or_otag = 0; - } else -#endif - if (dev->commands_since_idle_or_otag == AHC_OTAG_THRESH - && (dev->flags & AHC_DEV_Q_TAGGED) != 0) { - hscb->control |= MSG_ORDERED_TASK; + /* + * Fill out basics of the HSCB. + */ + hscb->control = 0; + hscb->scsiid = BUILD_SCSIID(ahc, cmd); + hscb->lun = cmd->device->lun; + mask = SCB_GET_TARGET_MASK(ahc, scb); + tinfo = ahc_fetch_transinfo(ahc, SCB_GET_CHANNEL(ahc, scb), + SCB_GET_OUR_ID(scb), + SCB_GET_TARGET(ahc, scb), &tstate); + hscb->scsirate = tinfo->scsirate; + hscb->scsioffset = tinfo->curr.offset; + if ((tstate->ultraenb & mask) != 0) + hscb->control |= ULTRAENB; + + if ((ahc->user_discenable & mask) != 0) + hscb->control |= DISCENB; + + if ((tstate->auto_negotiate & mask) != 0) { + scb->flags |= SCB_AUTO_NEGOTIATE; + scb->hscb->control |= MK_MESSAGE; + } + + if ((dev->flags & (AHC_DEV_Q_TAGGED|AHC_DEV_Q_BASIC)) != 0) { + int msg_bytes; + uint8_t tag_msgs[2]; + + msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs); + if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) { + hscb->control |= tag_msgs[0]; + if (tag_msgs[0] == MSG_ORDERED_TASK) dev->commands_since_idle_or_otag = 0; - } else { - hscb->control |= MSG_SIMPLE_TASK; - } - } - - hscb->cdb_len = cmd->cmd_len; - if (hscb->cdb_len <= 12) { - memcpy(hscb->shared_data.cdb, cmd->cmnd, hscb->cdb_len); + } else if (dev->commands_since_idle_or_otag == AHC_OTAG_THRESH + && (dev->flags & AHC_DEV_Q_TAGGED) != 0) { + hscb->control |= MSG_ORDERED_TASK; + dev->commands_since_idle_or_otag = 0; } else { - memcpy(hscb->cdb32, cmd->cmnd, hscb->cdb_len); - scb->flags |= SCB_CDB32_PTR; + hscb->control |= MSG_SIMPLE_TASK; } + } - scb->platform_data->xfer_len = 0; - ahc_set_residual(scb, 0); - ahc_set_sense_residual(scb, 0); - scb->sg_count = 0; - if (cmd->use_sg != 0) { - struct ahc_dma_seg *sg; - struct scatterlist *cur_seg; - struct scatterlist *end_seg; - int nseg; - - cur_seg = (struct scatterlist *)cmd->request_buffer; - nseg = pci_map_sg(ahc->dev_softc, cur_seg, cmd->use_sg, - cmd->sc_data_direction); - end_seg = cur_seg + nseg; - /* Copy the segments into the SG list. */ - sg = scb->sg_list; - /* - * The sg_count may be larger than nseg if - * a transfer crosses a 32bit page. - */ - while (cur_seg < end_seg) { - dma_addr_t addr; - bus_size_t len; - int consumed; - - addr = sg_dma_address(cur_seg); - len = sg_dma_len(cur_seg); - consumed = ahc_linux_map_seg(ahc, scb, - sg, addr, len); - sg += consumed; - scb->sg_count += consumed; - cur_seg++; - } - sg--; - sg->len |= ahc_htole32(AHC_DMA_LAST_SEG); - - /* - * Reset the sg list pointer. - */ - scb->hscb->sgptr = - ahc_htole32(scb->sg_list_phys | SG_FULL_RESID); + hscb->cdb_len = cmd->cmd_len; + if (hscb->cdb_len <= 12) { + memcpy(hscb->shared_data.cdb, cmd->cmnd, hscb->cdb_len); + } else { + memcpy(hscb->cdb32, cmd->cmnd, hscb->cdb_len); + scb->flags |= SCB_CDB32_PTR; + } - /* - * Copy the first SG into the "current" - * data pointer area. - */ - scb->hscb->dataptr = scb->sg_list->addr; - scb->hscb->datacnt = scb->sg_list->len; - } else if (cmd->request_bufflen != 0) { - struct ahc_dma_seg *sg; + scb->platform_data->xfer_len = 0; + ahc_set_residual(scb, 0); + ahc_set_sense_residual(scb, 0); + scb->sg_count = 0; + if (cmd->use_sg != 0) { + struct ahc_dma_seg *sg; + struct scatterlist *cur_seg; + struct scatterlist *end_seg; + int nseg; + + cur_seg = (struct scatterlist *)cmd->request_buffer; + nseg = pci_map_sg(ahc->dev_softc, cur_seg, cmd->use_sg, + cmd->sc_data_direction); + end_seg = cur_seg + nseg; + /* Copy the segments into the SG list. */ + sg = scb->sg_list; + /* + * The sg_count may be larger than nseg if + * a transfer crosses a 32bit page. + */ + while (cur_seg < end_seg) { dma_addr_t addr; - - sg = scb->sg_list; - addr = pci_map_single(ahc->dev_softc, - cmd->request_buffer, - cmd->request_bufflen, - cmd->sc_data_direction); - scb->platform_data->buf_busaddr = addr; - scb->sg_count = ahc_linux_map_seg(ahc, scb, - sg, addr, - cmd->request_bufflen); - sg->len |= ahc_htole32(AHC_DMA_LAST_SEG); - - /* - * Reset the sg list pointer. - */ - scb->hscb->sgptr = - ahc_htole32(scb->sg_list_phys | SG_FULL_RESID); - - /* - * Copy the first SG into the "current" - * data pointer area. - */ - scb->hscb->dataptr = sg->addr; - scb->hscb->datacnt = sg->len; - } else { - scb->hscb->sgptr = ahc_htole32(SG_LIST_NULL); - scb->hscb->dataptr = 0; - scb->hscb->datacnt = 0; - scb->sg_count = 0; + bus_size_t len; + int consumed; + + addr = sg_dma_address(cur_seg); + len = sg_dma_len(cur_seg); + consumed = ahc_linux_map_seg(ahc, scb, + sg, addr, len); + sg += consumed; + scb->sg_count += consumed; + cur_seg++; } + sg--; + sg->len |= ahc_htole32(AHC_DMA_LAST_SEG); - ahc_sync_sglist(ahc, scb, BUS_DMASYNC_PREWRITE); - LIST_INSERT_HEAD(&ahc->pending_scbs, scb, pending_links); - dev->openings--; - dev->active++; - dev->commands_issued++; - if ((dev->flags & AHC_DEV_PERIODIC_OTAG) != 0) - dev->commands_since_idle_or_otag++; + /* + * Reset the sg list pointer. + */ + scb->hscb->sgptr = + ahc_htole32(scb->sg_list_phys | SG_FULL_RESID); + + /* + * Copy the first SG into the "current" + * data pointer area. + */ + scb->hscb->dataptr = scb->sg_list->addr; + scb->hscb->datacnt = scb->sg_list->len; + } else if (cmd->request_bufflen != 0) { + struct ahc_dma_seg *sg; + dma_addr_t addr; + + sg = scb->sg_list; + addr = pci_map_single(ahc->dev_softc, + cmd->request_buffer, + cmd->request_bufflen, + cmd->sc_data_direction); + scb->platform_data->buf_busaddr = addr; + scb->sg_count = ahc_linux_map_seg(ahc, scb, + sg, addr, + cmd->request_bufflen); + sg->len |= ahc_htole32(AHC_DMA_LAST_SEG); /* - * We only allow one untagged transaction - * per target in the initiator role unless - * we are storing a full busy target *lun* - * table in SCB space. + * Reset the sg list pointer. */ - if ((scb->hscb->control & (TARGET_SCB|TAG_ENB)) == 0 - && (ahc->features & AHC_SCB_BTT) == 0) { - struct scb_tailq *untagged_q; - int target_offset; - - target_offset = SCB_GET_TARGET_OFFSET(ahc, scb); - untagged_q = &(ahc->untagged_queues[target_offset]); - TAILQ_INSERT_TAIL(untagged_q, scb, links.tqe); - scb->flags |= SCB_UNTAGGEDQ; - if (TAILQ_FIRST(untagged_q) != scb) - continue; - } - scb->flags |= SCB_ACTIVE; - ahc_queue_scb(ahc, scb); + scb->hscb->sgptr = + ahc_htole32(scb->sg_list_phys | SG_FULL_RESID); + + /* + * Copy the first SG into the "current" + * data pointer area. + */ + scb->hscb->dataptr = sg->addr; + scb->hscb->datacnt = sg->len; + } else { + scb->hscb->sgptr = ahc_htole32(SG_LIST_NULL); + scb->hscb->dataptr = 0; + scb->hscb->datacnt = 0; + scb->sg_count = 0; } + + LIST_INSERT_HEAD(&ahc->pending_scbs, scb, pending_links); + dev->openings--; + dev->active++; + dev->commands_issued++; + if ((dev->flags & AHC_DEV_PERIODIC_OTAG) != 0) + dev->commands_since_idle_or_otag++; + + scb->flags |= SCB_ACTIVE; + if (untagged_q) { + TAILQ_INSERT_TAIL(untagged_q, scb, links.tqe); + scb->flags |= SCB_UNTAGGEDQ; + } + ahc_queue_scb(ahc, scb); + return 0; } /* @@ -2267,9 +1757,6 @@ ahc_linux_isr(int irq, void *dev_id, struct pt_regs * regs) ahc = (struct ahc_softc *) dev_id; ahc_lock(ahc, &flags); ours = ahc_intr(ahc); - if (ahc_linux_next_device_to_run(ahc) != NULL) - ahc_schedule_runq(ahc); - ahc_linux_run_complete_queue(ahc); ahc_unlock(ahc, &flags); return IRQ_RETVAL(ours); } @@ -2278,8 +1765,6 @@ void ahc_platform_flushwork(struct ahc_softc *ahc) { - while (ahc_linux_run_complete_queue(ahc) != NULL) - ; } static struct ahc_linux_target* @@ -2348,9 +1833,6 @@ ahc_linux_alloc_device(struct ahc_softc *ahc, if (dev == NULL) return (NULL); memset(dev, 0, sizeof(*dev)); - init_timer(&dev->timer); - TAILQ_INIT(&dev->busyq); - dev->flags = AHC_DEV_UNCONFIGURED; dev->lun = lun; dev->target = targ; @@ -2373,7 +1855,7 @@ ahc_linux_alloc_device(struct ahc_softc *ahc, } static void -__ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev) +ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev) { struct ahc_linux_target *targ; @@ -2385,13 +1867,6 @@ __ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev) ahc_linux_free_target(ahc, targ); } -static void -ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev) -{ - del_timer_sync(&dev->timer); - __ahc_linux_free_device(ahc, dev); -} - void ahc_send_async(struct ahc_softc *ahc, char channel, u_int target, u_int lun, ac_code code, void *arg) @@ -2463,28 +1938,9 @@ ahc_send_async(struct ahc_softc *ahc, char channel, } case AC_SENT_BDR: { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) WARN_ON(lun != CAM_LUN_WILDCARD); scsi_report_device_reset(ahc->platform_data->host, channel - 'A', target); -#else - Scsi_Device *scsi_dev; - - /* - * Find the SCSI device associated with this - * request and indicate that a UA is expected. - */ - for (scsi_dev = ahc->platform_data->host->host_queue; - scsi_dev != NULL; scsi_dev = scsi_dev->next) { - if (channel - 'A' == scsi_dev->channel - && target == scsi_dev->id - && (lun == CAM_LUN_WILDCARD - || lun == scsi_dev->lun)) { - scsi_dev->was_reset = 1; - scsi_dev->expecting_cc_ua = 1; - } - } -#endif break; } case AC_BUS_RESET: @@ -2504,7 +1960,7 @@ ahc_send_async(struct ahc_softc *ahc, char channel, void ahc_done(struct ahc_softc *ahc, struct scb *scb) { - Scsi_Cmnd *cmd; + struct scsi_cmnd *cmd; struct ahc_linux_device *dev; LIST_REMOVE(scb, pending_links); @@ -2515,7 +1971,7 @@ ahc_done(struct ahc_softc *ahc, struct scb *scb) target_offset = SCB_GET_TARGET_OFFSET(ahc, scb); untagged_q = &(ahc->untagged_queues[target_offset]); TAILQ_REMOVE(untagged_q, scb, links.tqe); - ahc_run_untagged_queue(ahc, untagged_q); + BUG_ON(!TAILQ_EMPTY(untagged_q)); } if ((scb->flags & SCB_ACTIVE) == 0) { @@ -2583,8 +2039,6 @@ ahc_done(struct ahc_softc *ahc, struct scb *scb) } } else if (ahc_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) { ahc_linux_handle_scsi_status(ahc, dev, scb); - } else if (ahc_get_transaction_status(scb) == CAM_SEL_TIMEOUT) { - dev->flags |= AHC_DEV_UNCONFIGURED; } if (dev->openings == 1 @@ -2606,16 +2060,6 @@ ahc_done(struct ahc_softc *ahc, struct scb *scb) if (dev->active == 0) dev->commands_since_idle_or_otag = 0; - if (TAILQ_EMPTY(&dev->busyq)) { - if ((dev->flags & AHC_DEV_UNCONFIGURED) != 0 - && dev->active == 0 - && (dev->flags & AHC_DEV_TIMER_ACTIVE) == 0) - ahc_linux_free_device(ahc, dev); - } else if ((dev->flags & AHC_DEV_ON_RUN_LIST) == 0) { - TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, dev, links); - dev->flags |= AHC_DEV_ON_RUN_LIST; - } - if ((scb->flags & SCB_RECOVERY_SCB) != 0) { printf("Recovery SCB completes\n"); if (ahc_get_transaction_status(scb) == CAM_BDR_SENT @@ -2659,7 +2103,7 @@ ahc_linux_handle_scsi_status(struct ahc_softc *ahc, case SCSI_STATUS_CHECK_COND: case SCSI_STATUS_CMD_TERMINATED: { - Scsi_Cmnd *cmd; + struct scsi_cmnd *cmd; /* * Copy sense information to the OS's cmd @@ -2754,52 +2198,15 @@ ahc_linux_handle_scsi_status(struct ahc_softc *ahc, ahc_platform_set_tags(ahc, &devinfo, (dev->flags & AHC_DEV_Q_BASIC) ? AHC_QUEUE_BASIC : AHC_QUEUE_TAGGED); - /* FALLTHROUGH */ - } - case SCSI_STATUS_BUSY: - { - /* - * Set a short timer to defer sending commands for - * a bit since Linux will not delay in this case. - */ - if ((dev->flags & AHC_DEV_TIMER_ACTIVE) != 0) { - printf("%s:%c:%d: Device Timer still active during " - "busy processing\n", ahc_name(ahc), - dev->target->channel, dev->target->target); - break; - } - dev->flags |= AHC_DEV_TIMER_ACTIVE; - dev->qfrozen++; - init_timer(&dev->timer); - dev->timer.data = (u_long)dev; - dev->timer.expires = jiffies + (HZ/2); - dev->timer.function = ahc_linux_dev_timed_unfreeze; - add_timer(&dev->timer); break; } } } static void -ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, Scsi_Cmnd *cmd) +ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, struct scsi_cmnd *cmd) { /* - * Typically, the complete queue has very few entries - * queued to it before the queue is emptied by - * ahc_linux_run_complete_queue, so sorting the entries - * by generation number should be inexpensive. - * We perform the sort so that commands that complete - * with an error are retuned in the order origionally - * queued to the controller so that any subsequent retries - * are performed in order. The underlying ahc routines do - * not guarantee the order that aborted commands will be - * returned to us. - */ - struct ahc_completeq *completeq; - struct ahc_cmd *list_cmd; - struct ahc_cmd *acmd; - - /* * Map CAM error codes into Linux Error codes. We * avoid the conversion so that the DV code has the * full error information available when making @@ -2852,26 +2259,7 @@ ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, Scsi_Cmnd *cmd) new_status = DID_ERROR; break; case CAM_REQUEUE_REQ: - /* - * If we want the request requeued, make sure there - * are sufficent retries. In the old scsi error code, - * we used to be able to specify a result code that - * bypassed the retry count. Now we must use this - * hack. We also "fake" a check condition with - * a sense code of ABORTED COMMAND. This seems to - * evoke a retry even if this command is being sent - * via the eh thread. Ick! Ick! Ick! - */ - if (cmd->retries > 0) - cmd->retries--; - new_status = DID_OK; - ahc_cmd_set_scsi_status(cmd, SCSI_STATUS_CHECK_COND); - cmd->result |= (DRIVER_SENSE << 24); - memset(cmd->sense_buffer, 0, - sizeof(cmd->sense_buffer)); - cmd->sense_buffer[0] = SSD_ERRCODE_VALID - | SSD_CURRENT_ERROR; - cmd->sense_buffer[2] = SSD_KEY_ABORTED_COMMAND; + new_status = DID_REQUEUE; break; default: /* We should never get here */ @@ -2882,17 +2270,7 @@ ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, Scsi_Cmnd *cmd) ahc_cmd_set_transaction_status(cmd, new_status); } - completeq = &ahc->platform_data->completeq; - list_cmd = TAILQ_FIRST(completeq); - acmd = (struct ahc_cmd *)cmd; - while (list_cmd != NULL - && acmd_scsi_cmd(list_cmd).serial_number - < acmd_scsi_cmd(acmd).serial_number) - list_cmd = TAILQ_NEXT(list_cmd, acmd_links.tqe); - if (list_cmd != NULL) - TAILQ_INSERT_BEFORE(list_cmd, acmd, acmd_links.tqe); - else - TAILQ_INSERT_TAIL(completeq, acmd, acmd_links.tqe); + cmd->scsi_done(cmd); } static void @@ -2940,7 +2318,6 @@ ahc_linux_release_simq(u_long arg) ahc->platform_data->qfrozen--; if (ahc->platform_data->qfrozen == 0) unblock_reqs = 1; - ahc_schedule_runq(ahc); ahc_unlock(ahc, &s); /* * There is still a race here. The mid-layer @@ -2952,37 +2329,12 @@ ahc_linux_release_simq(u_long arg) scsi_unblock_requests(ahc->platform_data->host); } -static void -ahc_linux_dev_timed_unfreeze(u_long arg) -{ - struct ahc_linux_device *dev; - struct ahc_softc *ahc; - u_long s; - - dev = (struct ahc_linux_device *)arg; - ahc = dev->target->ahc; - ahc_lock(ahc, &s); - dev->flags &= ~AHC_DEV_TIMER_ACTIVE; - if (dev->qfrozen > 0) - dev->qfrozen--; - if (dev->qfrozen == 0 - && (dev->flags & AHC_DEV_ON_RUN_LIST) == 0) - ahc_linux_run_device_queue(ahc, dev); - if (TAILQ_EMPTY(&dev->busyq) - && dev->active == 0) - __ahc_linux_free_device(ahc, dev); - ahc_unlock(ahc, &s); -} - static int -ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag) +ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag) { struct ahc_softc *ahc; - struct ahc_cmd *acmd; - struct ahc_cmd *list_acmd; struct ahc_linux_device *dev; struct scb *pending_scb; - u_long s; u_int saved_scbptr; u_int active_scb_index; u_int last_phase; @@ -2998,7 +2350,6 @@ ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag) paused = FALSE; wait = FALSE; ahc = *(struct ahc_softc **)cmd->device->host->hostdata; - acmd = (struct ahc_cmd *)cmd; printf("%s:%d:%d:%d: Attempting to queue a%s message\n", ahc_name(ahc), cmd->device->channel, @@ -3011,22 +2362,6 @@ ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag) printf("\n"); /* - * In all versions of Linux, we have to work around - * a major flaw in how the mid-layer is locked down - * if we are to sleep successfully in our error handler - * while allowing our interrupt handler to run. Since - * the midlayer acquires either the io_request_lock or - * our lock prior to calling us, we must use the - * spin_unlock_irq() method for unlocking our lock. - * This will force interrupts to be enabled on the - * current CPU. Since the EH thread should not have - * been running with CPU interrupts disabled other than - * by acquiring either the io_request_lock or our own - * lock, this *should* be safe. - */ - ahc_midlayer_entrypoint_lock(ahc, &s); - - /* * First determine if we currently own this command. * Start by searching the device queue. If not found * there, check the pending_scb list. If not found @@ -3034,7 +2369,7 @@ ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag) * command, return success. */ dev = ahc_linux_get_device(ahc, cmd->device->channel, cmd->device->id, - cmd->device->lun, /*alloc*/FALSE); + cmd->device->lun); if (dev == NULL) { /* @@ -3048,24 +2383,6 @@ ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag) goto no_cmd; } - TAILQ_FOREACH(list_acmd, &dev->busyq, acmd_links.tqe) { - if (list_acmd == acmd) - break; - } - - if (list_acmd != NULL) { - printf("%s:%d:%d:%d: Command found on device queue\n", - ahc_name(ahc), cmd->device->channel, cmd->device->id, - cmd->device->lun); - if (flag == SCB_ABORT) { - TAILQ_REMOVE(&dev->busyq, list_acmd, acmd_links.tqe); - cmd->result = DID_ABORT << 16; - ahc_linux_queue_cmd_complete(ahc, cmd); - retval = SUCCESS; - goto done; - } - } - if ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED)) == 0 && ahc_search_untagged_queues(ahc, cmd, cmd->device->id, cmd->device->channel + 'A', @@ -3299,53 +2616,42 @@ done: } spin_lock_irq(&ahc->platform_data->spin_lock); } - ahc_schedule_runq(ahc); - ahc_linux_run_complete_queue(ahc); - ahc_midlayer_entrypoint_unlock(ahc, &s); return (retval); } void ahc_platform_dump_card_state(struct ahc_softc *ahc) { - struct ahc_linux_device *dev; - int channel; - int maxchannel; - int target; - int maxtarget; - int lun; - int i; - - maxchannel = (ahc->features & AHC_TWIN) ? 1 : 0; - maxtarget = (ahc->features & AHC_WIDE) ? 15 : 7; - for (channel = 0; channel <= maxchannel; channel++) { +} - for (target = 0; target <=maxtarget; target++) { +static void ahc_linux_exit(void); - for (lun = 0; lun < AHC_NUM_LUNS; lun++) { - struct ahc_cmd *acmd; +static void ahc_linux_get_width(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); + struct ahc_tmode_tstate *tstate; + struct ahc_initiator_tinfo *tinfo + = ahc_fetch_transinfo(ahc, + starget->channel + 'A', + shost->this_id, starget->id, &tstate); + spi_width(starget) = tinfo->curr.width; +} - dev = ahc_linux_get_device(ahc, channel, target, - lun, /*alloc*/FALSE); - if (dev == NULL) - continue; +static void ahc_linux_set_width(struct scsi_target *starget, int width) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); + struct ahc_devinfo devinfo; + unsigned long flags; - printf("DevQ(%d:%d:%d): ", - channel, target, lun); - i = 0; - TAILQ_FOREACH(acmd, &dev->busyq, - acmd_links.tqe) { - if (i++ > AHC_SCB_MAX) - break; - } - printf("%d waiting\n", i); - } - } - } + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, + starget->channel + 'A', ROLE_INITIATOR); + ahc_lock(ahc, &flags); + ahc_set_width(ahc, &devinfo, width, AHC_TRANS_GOAL, FALSE); + ahc_unlock(ahc, &flags); } -static void ahc_linux_exit(void); - static void ahc_linux_get_period(struct scsi_target *starget) { struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); @@ -3376,8 +2682,21 @@ static void ahc_linux_set_period(struct scsi_target *starget, int period) if (offset == 0) offset = MAX_OFFSET; + if (period < 9) + period = 9; /* 12.5ns is our minimum */ + if (period == 9) + ppr_options |= MSG_EXT_PPR_DT_REQ; + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, starget->channel + 'A', ROLE_INITIATOR); + + /* all PPR requests apart from QAS require wide transfers */ + if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) { + ahc_linux_get_width(starget); + if (spi_width(starget) == 0) + ppr_options &= MSG_EXT_PPR_QAS_REQ; + } + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, AHC_SYNCRATE_DT); ahc_lock(ahc, &flags); ahc_set_syncrate(ahc, &devinfo, syncrate, period, offset, @@ -3425,32 +2744,6 @@ static void ahc_linux_set_offset(struct scsi_target *starget, int offset) ahc_unlock(ahc, &flags); } -static void ahc_linux_get_width(struct scsi_target *starget) -{ - struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); - struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); - struct ahc_tmode_tstate *tstate; - struct ahc_initiator_tinfo *tinfo - = ahc_fetch_transinfo(ahc, - starget->channel + 'A', - shost->this_id, starget->id, &tstate); - spi_width(starget) = tinfo->curr.width; -} - -static void ahc_linux_set_width(struct scsi_target *starget, int width) -{ - struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); - struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); - struct ahc_devinfo devinfo; - unsigned long flags; - - ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, - starget->channel + 'A', ROLE_INITIATOR); - ahc_lock(ahc, &flags); - ahc_set_width(ahc, &devinfo, width, AHC_TRANS_GOAL, FALSE); - ahc_unlock(ahc, &flags); -} - static void ahc_linux_get_dt(struct scsi_target *starget) { struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); @@ -3479,10 +2772,15 @@ static void ahc_linux_set_dt(struct scsi_target *starget, int dt) unsigned long flags; struct ahc_syncrate *syncrate; + if (dt) { + period = 9; /* 12.5ns is the only period valid for DT */ + ppr_options |= MSG_EXT_PPR_DT_REQ; + } else if (period == 9) + period = 10; /* if resetting DT, period must be >= 25ns */ + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, starget->channel + 'A', ROLE_INITIATOR); - syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, - dt ? AHC_SYNCRATE_DT : AHC_SYNCRATE_ULTRA2); + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options,AHC_SYNCRATE_DT); ahc_lock(ahc, &flags); ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->curr.offset, ppr_options, AHC_TRANS_GOAL, FALSE); @@ -3514,7 +2812,6 @@ static void ahc_linux_set_qas(struct scsi_target *starget, int qas) unsigned int ppr_options = tinfo->curr.ppr_options & ~MSG_EXT_PPR_QAS_REQ; unsigned int period = tinfo->curr.period; - unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; unsigned long flags; struct ahc_syncrate *syncrate; @@ -3523,8 +2820,7 @@ static void ahc_linux_set_qas(struct scsi_target *starget, int qas) ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, starget->channel + 'A', ROLE_INITIATOR); - syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, - dt ? AHC_SYNCRATE_DT : AHC_SYNCRATE_ULTRA2); + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, AHC_SYNCRATE_DT); ahc_lock(ahc, &flags); ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->curr.offset, ppr_options, AHC_TRANS_GOAL, FALSE); @@ -3556,7 +2852,6 @@ static void ahc_linux_set_iu(struct scsi_target *starget, int iu) unsigned int ppr_options = tinfo->curr.ppr_options & ~MSG_EXT_PPR_IU_REQ; unsigned int period = tinfo->curr.period; - unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; unsigned long flags; struct ahc_syncrate *syncrate; @@ -3565,8 +2860,7 @@ static void ahc_linux_set_iu(struct scsi_target *starget, int iu) ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, starget->channel + 'A', ROLE_INITIATOR); - syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, - dt ? AHC_SYNCRATE_DT : AHC_SYNCRATE_ULTRA2); + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, AHC_SYNCRATE_DT); ahc_lock(ahc, &flags); ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->curr.offset, ppr_options, AHC_TRANS_GOAL, FALSE); @@ -3599,7 +2893,6 @@ static struct spi_function_template ahc_linux_transport_functions = { static int __init ahc_linux_init(void) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ahc_linux_transport_template = spi_attach_transport(&ahc_linux_transport_functions); if (!ahc_linux_transport_template) return -ENODEV; @@ -3608,29 +2901,11 @@ ahc_linux_init(void) spi_release_transport(ahc_linux_transport_template); ahc_linux_exit(); return -ENODEV; -#else - scsi_register_module(MODULE_SCSI_HA, &aic7xxx_driver_template); - if (aic7xxx_driver_template.present == 0) { - scsi_unregister_module(MODULE_SCSI_HA, - &aic7xxx_driver_template); - return (-ENODEV); - } - - return (0); -#endif } static void ahc_linux_exit(void) { -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - /* - * In 2.4 we have to unregister from the PCI core _after_ - * unregistering from the scsi midlayer to avoid dangling - * references. - */ - scsi_unregister_module(MODULE_SCSI_HA, &aic7xxx_driver_template); -#endif ahc_linux_pci_exit(); ahc_linux_eisa_exit(); spi_release_transport(ahc_linux_transport_template); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.h b/drivers/scsi/aic7xxx/aic7xxx_osm.h index ed9027bd8a40..30c200d5bcd5 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.h +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.h @@ -59,6 +59,7 @@ #ifndef _AIC7XXX_LINUX_H_ #define _AIC7XXX_LINUX_H_ +#include <linux/config.h> #include <linux/types.h> #include <linux/blkdev.h> #include <linux/delay.h> @@ -66,18 +67,21 @@ #include <linux/pci.h> #include <linux/smp_lock.h> #include <linux/version.h> +#include <linux/interrupt.h> #include <linux/module.h> +#include <linux/slab.h> #include <asm/byteorder.h> #include <asm/io.h> -#include <linux/interrupt.h> /* For tasklet support. */ -#include <linux/config.h> -#include <linux/slab.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_eh.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> /* Core SCSI definitions */ #define AIC_LIB_PREFIX ahc -#include "scsi.h" -#include <scsi/scsi_host.h> /* Name space conflict with BSD queue macros */ #ifdef LIST_HEAD @@ -106,7 +110,7 @@ /************************* Forward Declarations *******************************/ struct ahc_softc; typedef struct pci_dev *ahc_dev_softc_t; -typedef Scsi_Cmnd *ahc_io_ctx_t; +typedef struct scsi_cmnd *ahc_io_ctx_t; /******************************* Byte Order ***********************************/ #define ahc_htobe16(x) cpu_to_be16(x) @@ -144,7 +148,7 @@ typedef Scsi_Cmnd *ahc_io_ctx_t; extern u_int aic7xxx_no_probe; extern u_int aic7xxx_allow_memio; extern int aic7xxx_detect_complete; -extern Scsi_Host_Template aic7xxx_driver_template; +extern struct scsi_host_template aic7xxx_driver_template; /***************************** Bus Space/DMA **********************************/ @@ -174,11 +178,7 @@ struct ahc_linux_dma_tag }; typedef struct ahc_linux_dma_tag* bus_dma_tag_t; -struct ahc_linux_dmamap -{ - dma_addr_t bus_addr; -}; -typedef struct ahc_linux_dmamap* bus_dmamap_t; +typedef dma_addr_t bus_dmamap_t; typedef int bus_dma_filter_t(void*, dma_addr_t); typedef void bus_dmamap_callback_t(void *, bus_dma_segment_t *, int, int); @@ -281,12 +281,6 @@ ahc_scb_timer_reset(struct scb *scb, u_int usec) /***************************** SMP support ************************************/ #include <linux/spinlock.h> -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) || defined(SCSI_HAS_HOST_LOCK)) -#define AHC_SCSI_HAS_HOST_LOCK 1 -#else -#define AHC_SCSI_HAS_HOST_LOCK 0 -#endif - #define AIC7XXX_DRIVER_VERSION "6.2.36" /**************************** Front End Queues ********************************/ @@ -328,20 +322,15 @@ struct ahc_cmd { */ TAILQ_HEAD(ahc_busyq, ahc_cmd); typedef enum { - AHC_DEV_UNCONFIGURED = 0x01, AHC_DEV_FREEZE_TIL_EMPTY = 0x02, /* Freeze queue until active == 0 */ - AHC_DEV_TIMER_ACTIVE = 0x04, /* Our timer is active */ - AHC_DEV_ON_RUN_LIST = 0x08, /* Queued to be run later */ AHC_DEV_Q_BASIC = 0x10, /* Allow basic device queuing */ AHC_DEV_Q_TAGGED = 0x20, /* Allow full SCSI2 command queueing */ AHC_DEV_PERIODIC_OTAG = 0x40, /* Send OTAG to prevent starvation */ - AHC_DEV_SLAVE_CONFIGURED = 0x80 /* slave_configure() has been called */ } ahc_linux_dev_flags; struct ahc_linux_target; struct ahc_linux_device { TAILQ_ENTRY(ahc_linux_device) links; - struct ahc_busyq busyq; /* * The number of transactions currently @@ -382,11 +371,6 @@ struct ahc_linux_device { ahc_linux_dev_flags flags; /* - * Per device timer. - */ - struct timer_list timer; - - /* * The high limit for the tags variable. */ u_int maxtags; @@ -419,7 +403,7 @@ struct ahc_linux_device { #define AHC_OTAG_THRESH 500 int lun; - Scsi_Device *scsi_device; + struct scsi_device *scsi_device; struct ahc_linux_target *target; }; @@ -439,32 +423,16 @@ struct ahc_linux_target { * manner and are allocated below 4GB, the number of S/G segments is * unrestricted. */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -/* - * We dynamically adjust the number of segments in pre-2.5 kernels to - * avoid fragmentation issues in the SCSI mid-layer's private memory - * allocator. See aic7xxx_osm.c ahc_linux_size_nseg() for details. - */ -extern u_int ahc_linux_nseg; -#define AHC_NSEG ahc_linux_nseg -#define AHC_LINUX_MIN_NSEG 64 -#else #define AHC_NSEG 128 -#endif /* * Per-SCB OSM storage. */ -typedef enum { - AHC_UP_EH_SEMAPHORE = 0x1 -} ahc_linux_scb_flags; - struct scb_platform_data { struct ahc_linux_device *dev; dma_addr_t buf_busaddr; uint32_t xfer_len; uint32_t sense_resid; /* Auto-Sense residual */ - ahc_linux_scb_flags flags; }; /* @@ -473,39 +441,24 @@ struct scb_platform_data { * alignment restrictions of the various platforms supported by * this driver. */ -typedef enum { - AHC_RUN_CMPLT_Q_TIMER = 0x10 -} ahc_linux_softc_flags; - -TAILQ_HEAD(ahc_completeq, ahc_cmd); - struct ahc_platform_data { /* * Fields accessed from interrupt context. */ struct ahc_linux_target *targets[AHC_NUM_TARGETS]; - TAILQ_HEAD(, ahc_linux_device) device_runq; - struct ahc_completeq completeq; spinlock_t spin_lock; - struct tasklet_struct runq_tasklet; u_int qfrozen; - pid_t dv_pid; - struct timer_list completeq_timer; struct timer_list reset_timer; struct semaphore eh_sem; - struct semaphore dv_sem; - struct semaphore dv_cmd_sem; /* XXX This needs to be in - * the target struct - */ - struct scsi_device *dv_scsi_dev; struct Scsi_Host *host; /* pointer to scsi host */ #define AHC_LINUX_NOIRQ ((uint32_t)~0) uint32_t irq; /* IRQ for this adapter */ uint32_t bios_address; uint32_t mem_busaddr; /* Mem Base Addr */ - uint64_t hw_dma_mask; - ahc_linux_softc_flags flags; + +#define AHC_UP_EH_SEMAPHORE 0x1 + uint32_t flags; }; /************************** OS Utility Wrappers *******************************/ @@ -594,7 +547,7 @@ ahc_insb(struct ahc_softc * ahc, long port, uint8_t *array, int count) /**************************** Initialization **********************************/ int ahc_linux_register_host(struct ahc_softc *, - Scsi_Host_Template *); + struct scsi_host_template *); uint64_t ahc_linux_get_memsize(void); @@ -615,17 +568,6 @@ static __inline void ahc_lockinit(struct ahc_softc *); static __inline void ahc_lock(struct ahc_softc *, unsigned long *flags); static __inline void ahc_unlock(struct ahc_softc *, unsigned long *flags); -/* Lock acquisition and release of the above lock in midlayer entry points. */ -static __inline void ahc_midlayer_entrypoint_lock(struct ahc_softc *, - unsigned long *flags); -static __inline void ahc_midlayer_entrypoint_unlock(struct ahc_softc *, - unsigned long *flags); - -/* Lock held during command compeletion to the upper layer */ -static __inline void ahc_done_lockinit(struct ahc_softc *); -static __inline void ahc_done_lock(struct ahc_softc *, unsigned long *flags); -static __inline void ahc_done_unlock(struct ahc_softc *, unsigned long *flags); - /* Lock held during ahc_list manipulation and ahc softc frees */ extern spinlock_t ahc_list_spinlock; static __inline void ahc_list_lockinit(void); @@ -651,57 +593,6 @@ ahc_unlock(struct ahc_softc *ahc, unsigned long *flags) } static __inline void -ahc_midlayer_entrypoint_lock(struct ahc_softc *ahc, unsigned long *flags) -{ - /* - * In 2.5.X and some 2.4.X versions, the midlayer takes our - * lock just before calling us, so we avoid locking again. - * For other kernel versions, the io_request_lock is taken - * just before our entry point is called. In this case, we - * trade the io_request_lock for our per-softc lock. - */ -#if AHC_SCSI_HAS_HOST_LOCK == 0 - spin_unlock(&io_request_lock); - spin_lock(&ahc->platform_data->spin_lock); -#endif -} - -static __inline void -ahc_midlayer_entrypoint_unlock(struct ahc_softc *ahc, unsigned long *flags) -{ -#if AHC_SCSI_HAS_HOST_LOCK == 0 - spin_unlock(&ahc->platform_data->spin_lock); - spin_lock(&io_request_lock); -#endif -} - -static __inline void -ahc_done_lockinit(struct ahc_softc *ahc) -{ - /* - * In 2.5.X, our own lock is held during completions. - * In previous versions, the io_request_lock is used. - * In either case, we can't initialize this lock again. - */ -} - -static __inline void -ahc_done_lock(struct ahc_softc *ahc, unsigned long *flags) -{ -#if AHC_SCSI_HAS_HOST_LOCK == 0 - spin_lock_irqsave(&io_request_lock, *flags); -#endif -} - -static __inline void -ahc_done_unlock(struct ahc_softc *ahc, unsigned long *flags) -{ -#if AHC_SCSI_HAS_HOST_LOCK == 0 - spin_unlock_irqrestore(&io_request_lock, *flags); -#endif -} - -static __inline void ahc_list_lockinit(void) { spin_lock_init(&ahc_list_spinlock); @@ -767,12 +658,6 @@ typedef enum } ahc_power_state; /**************************** VL/EISA Routines ********************************/ -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) \ - && (defined(__i386__) || defined(__alpha__)) \ - && (!defined(CONFIG_EISA))) -#define CONFIG_EISA -#endif - #ifdef CONFIG_EISA extern uint32_t aic7xxx_probe_eisa_vl; int ahc_linux_eisa_init(void); @@ -888,22 +773,18 @@ ahc_flush_device_writes(struct ahc_softc *ahc) } /**************************** Proc FS Support *********************************/ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -int ahc_linux_proc_info(char *, char **, off_t, int, int, int); -#else int ahc_linux_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int); -#endif /*************************** Domain Validation ********************************/ /*********************** Transaction Access Wrappers *************************/ -static __inline void ahc_cmd_set_transaction_status(Scsi_Cmnd *, uint32_t); +static __inline void ahc_cmd_set_transaction_status(struct scsi_cmnd *, uint32_t); static __inline void ahc_set_transaction_status(struct scb *, uint32_t); -static __inline void ahc_cmd_set_scsi_status(Scsi_Cmnd *, uint32_t); +static __inline void ahc_cmd_set_scsi_status(struct scsi_cmnd *, uint32_t); static __inline void ahc_set_scsi_status(struct scb *, uint32_t); -static __inline uint32_t ahc_cmd_get_transaction_status(Scsi_Cmnd *cmd); +static __inline uint32_t ahc_cmd_get_transaction_status(struct scsi_cmnd *cmd); static __inline uint32_t ahc_get_transaction_status(struct scb *); -static __inline uint32_t ahc_cmd_get_scsi_status(Scsi_Cmnd *cmd); +static __inline uint32_t ahc_cmd_get_scsi_status(struct scsi_cmnd *cmd); static __inline uint32_t ahc_get_scsi_status(struct scb *); static __inline void ahc_set_transaction_tag(struct scb *, int, u_int); static __inline u_long ahc_get_transfer_length(struct scb *); @@ -922,7 +803,7 @@ static __inline void ahc_platform_scb_free(struct ahc_softc *ahc, static __inline void ahc_freeze_scb(struct scb *scb); static __inline -void ahc_cmd_set_transaction_status(Scsi_Cmnd *cmd, uint32_t status) +void ahc_cmd_set_transaction_status(struct scsi_cmnd *cmd, uint32_t status) { cmd->result &= ~(CAM_STATUS_MASK << 16); cmd->result |= status << 16; @@ -935,7 +816,7 @@ void ahc_set_transaction_status(struct scb *scb, uint32_t status) } static __inline -void ahc_cmd_set_scsi_status(Scsi_Cmnd *cmd, uint32_t status) +void ahc_cmd_set_scsi_status(struct scsi_cmnd *cmd, uint32_t status) { cmd->result &= ~0xFFFF; cmd->result |= status; @@ -948,7 +829,7 @@ void ahc_set_scsi_status(struct scb *scb, uint32_t status) } static __inline -uint32_t ahc_cmd_get_transaction_status(Scsi_Cmnd *cmd) +uint32_t ahc_cmd_get_transaction_status(struct scsi_cmnd *cmd) { return ((cmd->result >> 16) & CAM_STATUS_MASK); } @@ -960,7 +841,7 @@ uint32_t ahc_get_transaction_status(struct scb *scb) } static __inline -uint32_t ahc_cmd_get_scsi_status(Scsi_Cmnd *cmd) +uint32_t ahc_cmd_get_scsi_status(struct scsi_cmnd *cmd) { return (cmd->result & 0xFFFF); } diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c index 6f6674aa31ef..2a0ebce83e7a 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c @@ -221,13 +221,11 @@ ahc_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent) && ahc_linux_get_memsize() > 0x80000000 && pci_set_dma_mask(pdev, mask_39bit) == 0) { ahc->flags |= AHC_39BIT_ADDRESSING; - ahc->platform_data->hw_dma_mask = mask_39bit; } else { if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n"); return (-ENODEV); } - ahc->platform_data->hw_dma_mask = DMA_32BIT_MASK; } ahc->dev_softc = pci; error = ahc_pci_config(ahc, entry); @@ -236,15 +234,8 @@ ahc_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return (-error); } pci_set_drvdata(pdev, ahc); - if (aic7xxx_detect_complete) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) + if (aic7xxx_detect_complete) ahc_linux_register_host(ahc, &aic7xxx_driver_template); -#else - printf("aic7xxx: ignoring PCI device found after " - "initialization\n"); - return (-ENODEV); -#endif - } return (0); } diff --git a/drivers/scsi/aic7xxx/aic7xxx_proc.c b/drivers/scsi/aic7xxx/aic7xxx_proc.c index 85e80eecc9d0..5fece859fbd9 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_proc.c +++ b/drivers/scsi/aic7xxx/aic7xxx_proc.c @@ -289,13 +289,8 @@ done: * Return information to handle /proc support for the driver. */ int -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -ahc_linux_proc_info(char *buffer, char **start, off_t offset, - int length, int hostno, int inout) -#else ahc_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length, int inout) -#endif { struct ahc_softc *ahc; struct info_str info; @@ -307,15 +302,7 @@ ahc_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start, retval = -EINVAL; ahc_list_lock(&s); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - TAILQ_FOREACH(ahc, &ahc_tailq, links) { - if (ahc->platform_data->host->host_no == hostno) - break; - } -#else ahc = ahc_find_softc(*(struct ahc_softc **)shost->hostdata); -#endif - if (ahc == NULL) goto done; diff --git a/drivers/scsi/aic7xxx/aiclib.c b/drivers/scsi/aic7xxx/aiclib.c index 79bfd9efd8ed..7c5a6db0e672 100644 --- a/drivers/scsi/aic7xxx/aiclib.c +++ b/drivers/scsi/aic7xxx/aiclib.c @@ -35,7 +35,6 @@ #include <linux/version.h> /* Core SCSI definitions */ -#include "scsi.h" #include <scsi/scsi_host.h> #include "aiclib.h" #include "cam.h" diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 3867f91ef8c7..3be546439252 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -153,6 +153,7 @@ static struct ata_port_operations piix_pata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_operations piix_sata_ops = { @@ -180,6 +181,7 @@ static struct ata_port_operations piix_sata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info piix_port_info[] = { @@ -663,15 +665,6 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return ata_pci_init_one(pdev, port_info, n_ports); } -/** - * piix_init - - * - * LOCKING: - * - * RETURNS: - * - */ - static int __init piix_init(void) { int rc; @@ -687,13 +680,6 @@ static int __init piix_init(void) return 0; } -/** - * piix_exit - - * - * LOCKING: - * - */ - static void __exit piix_exit(void) { pci_unregister_driver(&piix_pci_driver); diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 2e2486b035dd..83f062ed9082 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -179,8 +179,18 @@ static void idescsi_input_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigne return; } count = min(pc->sg->length - pc->b_count, bcount); - buf = page_address(pc->sg->page) + pc->sg->offset; - drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count); + if (PageHighMem(pc->sg->page)) { + unsigned long flags; + + local_irq_save(flags); + buf = kmap_atomic(pc->sg->page, KM_IRQ0) + pc->sg->offset; + drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count); + kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(pc->sg->page) + pc->sg->offset; + drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count); + } bcount -= count; pc->b_count += count; if (pc->b_count == pc->sg->length) { pc->sg++; @@ -201,8 +211,18 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign return; } count = min(pc->sg->length - pc->b_count, bcount); - buf = page_address(pc->sg->page) + pc->sg->offset; - drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count); + if (PageHighMem(pc->sg->page)) { + unsigned long flags; + + local_irq_save(flags); + buf = kmap_atomic(pc->sg->page, KM_IRQ0) + pc->sg->offset; + drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count); + kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(pc->sg->page) + pc->sg->offset; + drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count); + } bcount -= count; pc->b_count += count; if (pc->b_count == pc->sg->length) { pc->sg++; @@ -713,7 +733,6 @@ static void idescsi_add_settings(ide_drive_t *drive) */ static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi) { - DRIVER(drive)->busy++; if (drive->id && (drive->id->config & 0x0060) == 0x20) set_bit (IDESCSI_DRQ_INTERRUPT, &scsi->flags); set_bit(IDESCSI_TRANSFORM, &scsi->transform); @@ -722,17 +741,16 @@ static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi) set_bit(IDESCSI_LOG_CMD, &scsi->log); #endif /* IDESCSI_DEBUG_LOG */ idescsi_add_settings(drive); - DRIVER(drive)->busy--; } -static int idescsi_cleanup (ide_drive_t *drive) +static int ide_scsi_remove(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); struct Scsi_Host *scsihost = drive->driver_data; struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost); struct gendisk *g = scsi->disk; - if (ide_unregister_subdriver(drive)) - return 1; + ide_unregister_subdriver(drive, scsi->driver); ide_unregister_region(g); @@ -746,7 +764,7 @@ static int idescsi_cleanup (ide_drive_t *drive) return 0; } -static int idescsi_attach(ide_drive_t *drive); +static int ide_scsi_probe(struct device *); #ifdef CONFIG_PROC_FS static ide_proc_entry_t idescsi_proc[] = { @@ -757,24 +775,22 @@ static ide_proc_entry_t idescsi_proc[] = { # define idescsi_proc NULL #endif -/* - * IDE subdriver functions, registered with ide.c - */ static ide_driver_t idescsi_driver = { .owner = THIS_MODULE, - .name = "ide-scsi", + .gen_driver = { + .name = "ide-scsi", + .bus = &ide_bus_type, + .probe = ide_scsi_probe, + .remove = ide_scsi_remove, + }, .version = IDESCSI_VERSION, .media = ide_scsi, - .busy = 0, .supports_dsc_overlap = 0, .proc = idescsi_proc, - .attach = idescsi_attach, - .cleanup = idescsi_cleanup, .do_request = idescsi_do_request, .end_request = idescsi_end_request, .error = idescsi_atapi_error, .abort = idescsi_atapi_abort, - .drives = LIST_HEAD_INIT(idescsi_driver.drives), }; static int idescsi_ide_open(struct inode *inode, struct file *filp) @@ -821,8 +837,6 @@ static struct block_device_operations idescsi_ops = { .ioctl = idescsi_ide_ioctl, }; -static int idescsi_attach(ide_drive_t *drive); - static int idescsi_slave_configure(struct scsi_device * sdp) { /* Configure detected device */ @@ -1095,8 +1109,9 @@ static struct scsi_host_template idescsi_template = { .proc_name = "ide-scsi", }; -static int idescsi_attach(ide_drive_t *drive) +static int ide_scsi_probe(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); idescsi_scsi_t *idescsi; struct Scsi_Host *host; struct gendisk *g; @@ -1112,7 +1127,7 @@ static int idescsi_attach(ide_drive_t *drive) !drive->present || drive->media == ide_disk || !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t)))) - return 1; + return -ENODEV; g = alloc_disk(1 << PARTN_BITS); if (!g) @@ -1138,20 +1153,19 @@ static int idescsi_attach(ide_drive_t *drive) idescsi->host = host; idescsi->disk = g; g->private_data = &idescsi->driver; - err = ide_register_subdriver(drive, &idescsi_driver); + ide_register_subdriver(drive, &idescsi_driver); + err = 0; + idescsi_setup(drive, idescsi); + g->fops = &idescsi_ops; + ide_register_region(g); + err = scsi_add_host(host, &drive->gendev); if (!err) { - idescsi_setup (drive, idescsi); - g->fops = &idescsi_ops; - ide_register_region(g); - err = scsi_add_host(host, &drive->gendev); - if (!err) { - scsi_scan_host(host); - return 0; - } - /* fall through on error */ - ide_unregister_region(g); - ide_unregister_subdriver(drive); + scsi_scan_host(host); + return 0; } + /* fall through on error */ + ide_unregister_region(g); + ide_unregister_subdriver(drive, &idescsi_driver); put_disk(g); out_host_put: @@ -1161,12 +1175,12 @@ out_host_put: static int __init init_idescsi_module(void) { - return ide_register_driver(&idescsi_driver); + return driver_register(&idescsi_driver.gen_driver); } static void __exit exit_idescsi_module(void) { - ide_unregister_driver(&idescsi_driver); + driver_unregister(&idescsi_driver.gen_driver); } module_init(init_idescsi_module); diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 8b5a3f00083d..84c4770e5bb4 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -186,6 +186,28 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) ata_wait_idle(ap); } + +/** + * ata_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO + * or PIO as indicated by the ATA_FLAG_MMIO flag. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * May be used as the tf_load() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -195,11 +217,11 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) } /** - * ata_exec_command - issue ATA command to host controller + * ata_exec_command_pio - issue ATA command to host controller * @ap: port to which command is being issued * @tf: ATA taskfile register set * - * Issues PIO/MMIO write to ATA command register, with proper + * Issues PIO write to ATA command register, with proper * synchronization with interrupt handler / other threads. * * LOCKING: @@ -235,6 +257,18 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) ata_pause(ap); } + +/** + * ata_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO/MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -305,7 +339,7 @@ void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf) } /** - * ata_tf_read - input device's ATA taskfile shadow registers + * ata_tf_read_pio - input device's ATA taskfile shadow registers * @ap: Port from which input is read * @tf: ATA taskfile register set for storing input * @@ -368,6 +402,23 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) } } + +/** + * ata_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 + * is set, also reads the hob registers. + * + * May be used as the tf_read() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -381,7 +432,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) * @ap: port where the device is * * Reads ATA taskfile status register for currently-selected device - * and return it's value. This also clears pending interrupts + * and return its value. This also clears pending interrupts * from this device * * LOCKING: @@ -397,7 +448,7 @@ static u8 ata_check_status_pio(struct ata_port *ap) * @ap: port where the device is * * Reads ATA taskfile status register for currently-selected device - * via MMIO and return it's value. This also clears pending interrupts + * via MMIO and return its value. This also clears pending interrupts * from this device * * LOCKING: @@ -408,6 +459,20 @@ static u8 ata_check_status_mmio(struct ata_port *ap) return readb((void __iomem *) ap->ioaddr.status_addr); } + +/** + * ata_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * May be used as the check_status() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_check_status(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) @@ -415,6 +480,20 @@ u8 ata_check_status(struct ata_port *ap) return ata_check_status_pio(ap); } + +/** + * ata_altstatus - Read device alternate status reg + * @ap: port where the device is + * + * Reads ATA taskfile alternate status register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_altstatus() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_altstatus(struct ata_port *ap) { if (ap->ops->check_altstatus) @@ -425,6 +504,20 @@ u8 ata_altstatus(struct ata_port *ap) return inb(ap->ioaddr.altstatus_addr); } + +/** + * ata_chk_err - Read device error reg + * @ap: port where the device is + * + * Reads ATA taskfile error register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_err() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_chk_err(struct ata_port *ap) { if (ap->ops->check_err) @@ -873,10 +966,24 @@ void ata_dev_id_string(u16 *id, unsigned char *s, } } + +/** + * ata_noop_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * This function performs no actual function. + * + * May be used as the dev_select() entry in ata_port_operations. + * + * LOCKING: + * caller. + */ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) { } + /** * ata_std_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate @@ -884,7 +991,9 @@ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) * * Use the method defined in the ATA specification to * make either device 0, or device 1, active on the - * ATA channel. + * ATA channel. Works with both PIO and MMIO. + * + * May be used as the dev_select() entry in ata_port_operations. * * LOCKING: * caller. @@ -1221,7 +1330,12 @@ void ata_dev_config(struct ata_port *ap, unsigned int i) * ata_bus_probe - Reset and probe ATA bus * @ap: Bus to probe * + * Master ATA bus probing function. Initiates a hardware-dependent + * bus reset, then attempts to identify any devices found on + * the bus. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: * Zero on success, non-zero on error. @@ -1259,10 +1373,14 @@ err_out: } /** - * ata_port_probe - - * @ap: + * ata_port_probe - Mark port as enabled + * @ap: Port for which we indicate enablement * - * LOCKING: + * Modify @ap data structure such that the system + * thinks that the entire port is enabled. + * + * LOCKING: host_set lock, or some other form of + * serialization. */ void ata_port_probe(struct ata_port *ap) @@ -1271,10 +1389,15 @@ void ata_port_probe(struct ata_port *ap) } /** - * __sata_phy_reset - - * @ap: + * __sata_phy_reset - Wake/reset a low-level SATA PHY + * @ap: SATA port associated with target SATA PHY. + * + * This function issues commands to standard SATA Sxxx + * PHY registers, to wake up the phy (and device), and + * clear any reset condition. * * LOCKING: + * PCI/etc. bus probe sem. * */ void __sata_phy_reset(struct ata_port *ap) @@ -1283,11 +1406,11 @@ void __sata_phy_reset(struct ata_port *ap) unsigned long timeout = jiffies + (HZ * 5); if (ap->flags & ATA_FLAG_SATA_RESET) { - scr_write(ap, SCR_CONTROL, 0x301); /* issue phy wake/reset */ - scr_read(ap, SCR_STATUS); /* dummy read; flush */ + /* issue phy wake/reset */ + scr_write_flush(ap, SCR_CONTROL, 0x301); udelay(400); /* FIXME: a guess */ } - scr_write(ap, SCR_CONTROL, 0x300); /* issue phy wake/clear reset */ + scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */ /* wait for phy to become ready, if necessary */ do { @@ -1319,10 +1442,14 @@ void __sata_phy_reset(struct ata_port *ap) } /** - * __sata_phy_reset - - * @ap: + * sata_phy_reset - Reset SATA bus. + * @ap: SATA port associated with target SATA PHY. + * + * This function resets the SATA bus, and then probes + * the bus for devices. * * LOCKING: + * PCI/etc. bus probe sem. * */ void sata_phy_reset(struct ata_port *ap) @@ -1334,10 +1461,16 @@ void sata_phy_reset(struct ata_port *ap) } /** - * ata_port_disable - - * @ap: + * ata_port_disable - Disable port. + * @ap: Port to be disabled. * - * LOCKING: + * Modify @ap data structure such that the system + * thinks that the entire port is disabled, and should + * never attempt to probe or communicate with devices + * on this port. + * + * LOCKING: host_set lock, or some other form of + * serialization. */ void ata_port_disable(struct ata_port *ap) @@ -1446,7 +1579,10 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, * ata_set_mode - Program timings and issue SET FEATURES - XFER * @ap: port on which timings will be programmed * + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). + * * LOCKING: + * PCI/etc. bus probe sem. * */ static void ata_set_mode(struct ata_port *ap) @@ -1497,7 +1633,10 @@ err_out: * @tmout_pat: impatience timeout * @tmout: overall timeout * - * LOCKING: + * Sleep until ATA Status register bit BSY clears, + * or a timeout occurs. + * + * LOCKING: None. * */ @@ -1583,10 +1722,14 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) } /** - * ata_bus_edd - - * @ap: + * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command. + * @ap: Port to reset and probe + * + * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and + * probe the bus. Not often used these days. * * LOCKING: + * PCI/etc. bus probe sem. * */ @@ -1663,8 +1806,8 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * the device is ATA or ATAPI. * * LOCKING: - * Inherited from caller. Some functions called by this function - * obtain the host_set lock. + * PCI/etc. bus probe sem. + * Obtains host_set lock. * * SIDE EFFECTS: * Sets ATA_FLAG_PORT_DISABLED if bus reset fails. @@ -1906,7 +2049,11 @@ static int fgb(u32 bitmap) * @xfer_mode_out: (output) SET FEATURES - XFER MODE code * @xfer_shift_out: (output) bit shift that selects this mode * + * Based on host and device capabilities, determine the + * maximum transfer mode that is amenable to all. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: * Zero on success, negative on error. @@ -1939,7 +2086,11 @@ static int ata_choose_xfer_mode(struct ata_port *ap, * @ap: Port associated with device @dev * @dev: Device to which command will be sent * + * Issue SET FEATURES - XFER MODE command to device @dev + * on port @ap. + * * LOCKING: + * PCI/etc. bus probe sem. */ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) @@ -1977,10 +2128,13 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) } /** - * ata_sg_clean - - * @qc: + * ata_sg_clean - Unmap DMA memory associated with command + * @qc: Command containing DMA memory to be released + * + * Unmap all mapped DMA memory associated with this command. * * LOCKING: + * spin_lock_irqsave(host_set lock) */ static void ata_sg_clean(struct ata_queued_cmd *qc) @@ -2011,7 +2165,11 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) * ata_fill_sg - Fill PCI IDE PRD table * @qc: Metadata associated with taskfile to be transferred * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ static void ata_fill_sg(struct ata_queued_cmd *qc) @@ -2058,7 +2216,13 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) * ata_check_atapi_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check * + * Allow low-level driver to filter ATA PACKET commands, returning + * a status indicating whether or not it is OK to use DMA for the + * supplied PACKET command. + * * LOCKING: + * spin_lock_irqsave(host_set lock) + * * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise */ @@ -2076,6 +2240,8 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) * ata_qc_prep - Prepare taskfile for submission * @qc: Metadata associated with taskfile to be prepared * + * Prepare ATA taskfile for submission. + * * LOCKING: * spin_lock_irqsave(host_set lock) */ @@ -2087,6 +2253,32 @@ void ata_qc_prep(struct ata_queued_cmd *qc) ata_fill_sg(qc); } +/** + * ata_sg_init_one - Associate command with memory buffer + * @qc: Command to be associated + * @buf: Memory buffer + * @buflen: Length of memory buffer, in bytes. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a single memory buffer, @buf of byte length @buflen. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + + + +/** + * ata_sg_init_one - Prepare a one-entry scatter-gather list. + * @qc: Queued command + * @buf: transfer buffer + * @buflen: length of buf + * + * Builds a single-entry scatter-gather list to initiate a + * transfer utilizing the specified buffer. + * + * LOCKING: + */ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { struct scatterlist *sg; @@ -2101,9 +2293,35 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) sg = qc->sg; sg->page = virt_to_page(buf); sg->offset = (unsigned long) buf & ~PAGE_MASK; - sg_dma_len(sg) = buflen; + sg->length = buflen; } +/** + * ata_sg_init - Associate command with scatter-gather table. + * @qc: Command to be associated + * @sg: Scatter-gather table. + * @n_elem: Number of elements in s/g table. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a scatter-gather table @sg, containing @n_elem + * elements. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + + +/** + * ata_sg_init - Assign a scatter gather list to a queued command + * @qc: Queued command + * @sg: Scatter-gather list + * @n_elem: length of sg list + * + * Attaches a scatter-gather list to a queued command. + * + * LOCKING: + */ + void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { @@ -2113,14 +2331,16 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, } /** - * ata_sg_setup_one - - * @qc: + * ata_sg_setup_one - DMA-map the memory buffer associated with a command. + * @qc: Command with memory buffer to be mapped. + * + * DMA-map the memory buffer associated with queued_cmd @qc. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: - * + * Zero on success, negative on error. */ static int ata_sg_setup_one(struct ata_queued_cmd *qc) @@ -2131,11 +2351,12 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) dma_addr_t dma_address; dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt, - sg_dma_len(sg), dir); + sg->length, dir); if (dma_mapping_error(dma_address)) return -1; sg_dma_address(sg) = dma_address; + sg_dma_len(sg) = sg->length; DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); @@ -2144,13 +2365,16 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) } /** - * ata_sg_setup - - * @qc: + * ata_sg_setup - DMA-map the scatter-gather table associated with a command. + * @qc: Command with scatter-gather table to be mapped. + * + * DMA-map the scatter-gather table associated with queued_cmd @qc. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: + * Zero on success, negative on error. * */ @@ -2180,6 +2404,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) * @ap: * * LOCKING: + * None. (executing in kernel thread context) * * RETURNS: * @@ -2227,6 +2452,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) * @ap: * * LOCKING: + * None. (executing in kernel thread context) */ static void ata_pio_complete (struct ata_port *ap) @@ -2269,6 +2495,18 @@ static void ata_pio_complete (struct ata_port *ap) ata_qc_complete(qc, drv_stat); } + +/** + * swap_buf_le16 - + * @buf: Buffer to swap + * @buf_words: Number of 16-bit words in buffer. + * + * Swap halves of 16-bit words if needed to convert from + * little-endian byte order to native cpu byte order, or + * vice-versa. + * + * LOCKING: + */ void swap_buf_le16(u16 *buf, unsigned int buf_words) { #ifdef __BIG_ENDIAN @@ -2340,7 +2578,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) qc->cursect++; qc->cursg_ofs++; - if ((qc->cursg_ofs * ATA_SECT_SIZE) == sg_dma_len(&sg[qc->cursg])) { + if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) { qc->cursg++; qc->cursg_ofs = 0; } @@ -2377,7 +2615,7 @@ next_page: page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; - count = min(sg_dma_len(sg) - qc->cursg_ofs, bytes); + count = min(sg->length - qc->cursg_ofs, bytes); /* don't cross page boundaries */ count = min(count, (unsigned int)PAGE_SIZE - offset); @@ -2388,7 +2626,7 @@ next_page: qc->curbytes += count; qc->cursg_ofs += count; - if (qc->cursg_ofs == sg_dma_len(sg)) { + if (qc->cursg_ofs == sg->length) { qc->cursg++; qc->cursg_ofs = 0; } @@ -2401,7 +2639,7 @@ next_page: kunmap(page); if (bytes) { - if (qc->cursg_ofs < sg_dma_len(sg)) + if (qc->cursg_ofs < sg->length) goto next_page; goto next_sg; } @@ -2444,6 +2682,7 @@ err_out: * @ap: * * LOCKING: + * None. (executing in kernel thread context) */ static void ata_pio_block(struct ata_port *ap) @@ -2569,7 +2808,7 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); qc->dma_dir = DMA_FROM_DEVICE; - memset(&qc->cdb, 0, sizeof(ap->cdb_len)); + memset(&qc->cdb, 0, ap->cdb_len); qc->cdb[0] = REQUEST_SENSE; qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; @@ -2612,6 +2851,7 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, * transaction completed successfully. * * LOCKING: + * Inherited from SCSI layer (none, can sleep) */ static void ata_qc_timeout(struct ata_queued_cmd *qc) @@ -2721,6 +2961,7 @@ out: * @dev: Device from whom we request an available command structure * * LOCKING: + * None. */ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) @@ -2746,6 +2987,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) * @dev: Device from whom we request an available command structure * * LOCKING: + * None. */ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, @@ -2810,6 +3052,7 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) * in case something prevents using it. * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ void ata_qc_free(struct ata_queued_cmd *qc) @@ -2823,9 +3066,13 @@ void ata_qc_free(struct ata_queued_cmd *qc) /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete - * @drv_stat: ATA status register contents + * @drv_stat: ATA Status register contents + * + * Indicate to the mid and upper layers that an ATA + * command has completed, with either an ok or not-ok status. * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ @@ -2841,6 +3088,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) /* call completion callback */ rc = qc->complete_fn(qc, drv_stat); + qc->flags &= ~ATA_QCFLAG_ACTIVE; /* if callback indicates not to complete command (non-zero), * return immediately @@ -2920,6 +3168,7 @@ err_out: return -1; } + /** * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner * @qc: command to issue to device @@ -2929,6 +3178,8 @@ err_out: * classes called "protocols", and issuing each type of protocol * is slightly different. * + * May be used as the qc_issue() entry in ata_port_operations. + * * LOCKING: * spin_lock_irqsave(host_set lock) * @@ -2986,7 +3237,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) } /** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction * @qc: Info associated with this ATA transaction. * * LOCKING: @@ -3093,6 +3344,18 @@ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) ap->ioaddr.bmdma_addr + ATA_DMA_CMD); } + +/** + * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes the ATA_DMA_START flag to the DMA command register. + * + * May be used as the bmdma_start() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_bmdma_start(struct ata_queued_cmd *qc) { if (qc->ap->flags & ATA_FLAG_MMIO) @@ -3101,6 +3364,20 @@ void ata_bmdma_start(struct ata_queued_cmd *qc) ata_bmdma_start_pio(qc); } + +/** + * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes address of PRD table to device's PRD Table Address + * register, sets the DMA control register, and calls + * ops->exec_command() to start the transfer. + * + * May be used as the bmdma_setup() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_bmdma_setup(struct ata_queued_cmd *qc) { if (qc->ap->flags & ATA_FLAG_MMIO) @@ -3109,6 +3386,19 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc) ata_bmdma_setup_pio(qc); } + +/** + * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * @ap: Port associated with this ATA transaction. + * + * Clear interrupt and error flags in DMA status register. + * + * May be used as the irq_clear() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_bmdma_irq_clear(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) { @@ -3121,6 +3411,19 @@ void ata_bmdma_irq_clear(struct ata_port *ap) } + +/** + * ata_bmdma_status - Read PCI IDE BMDMA status + * @ap: Port associated with this ATA transaction. + * + * Read and return BMDMA status register. + * + * May be used as the bmdma_status() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + u8 ata_bmdma_status(struct ata_port *ap) { u8 host_stat; @@ -3132,6 +3435,19 @@ u8 ata_bmdma_status(struct ata_port *ap) return host_stat; } + +/** + * ata_bmdma_stop - Stop PCI IDE BMDMA transfer + * @ap: Port associated with this ATA transaction. + * + * Clears the ATA_DMA_START flag in the dma control register + * + * May be used as the bmdma_stop() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_bmdma_stop(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) { @@ -3231,13 +3547,18 @@ idle_irq: /** * ata_interrupt - Default ATA host interrupt handler - * @irq: irq line - * @dev_instance: pointer to our host information structure + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host_set information structure * @regs: unused * + * Default interrupt handler for PCI IDE devices. Calls + * ata_host_intr() for each port that is not disabled. + * * LOCKING: + * Obtains host_set lock during operation. * * RETURNS: + * IRQ_NONE or IRQ_HANDLED. * */ @@ -3259,7 +3580,8 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) + if (qc && (!(qc->tf.ctl & ATA_NIEN)) && + (qc->flags & ATA_QCFLAG_ACTIVE)) handled |= ata_host_intr(ap, qc); } } @@ -3329,6 +3651,19 @@ err_out: ata_qc_complete(qc, ATA_ERR); } + +/** + * ata_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + */ + int ata_port_start (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -3342,6 +3677,18 @@ int ata_port_start (struct ata_port *ap) return 0; } + +/** + * ata_port_stop - Undo ata_port_start() + * @ap: Port to shut down + * + * Frees the PRD table. + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + */ + void ata_port_stop (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -3349,6 +3696,13 @@ void ata_port_stop (struct ata_port *ap) dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); } +void ata_host_stop (struct ata_host_set *host_set) +{ + if (host_set->mmio_base) + iounmap(host_set->mmio_base); +} + + /** * ata_host_remove - Unregister SCSI host structure with upper layers * @ap: Port to unregister @@ -3377,7 +3731,11 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) * @ent: Probe information provided by low-level driver * @port_no: Port number associated with this ata_port * + * Initialize a new ata_port structure, and its associated + * scsi_host. + * * LOCKING: + * Inherited from caller. * */ @@ -3432,9 +3790,13 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * @host_set: Collections of ports to which we add * @port_no: Port number associated with this host * + * Attach low-level ATA driver to system. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: + * New ata_port on success, for NULL on error. * */ @@ -3467,12 +3829,22 @@ err_out: } /** - * ata_device_add - - * @ent: + * ata_device_add - Register hardware device with ATA and SCSI layers + * @ent: Probe information describing hardware device to be registered + * + * This function processes the information provided in the probe + * information struct @ent, allocates the necessary ATA and SCSI + * host information structures, initializes them, and registers + * everything with requisite kernel subsystems. + * + * This function requests irqs, probes the ATA bus, and probes + * the SCSI bus. * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: + * Number of ports registered. Zero on error (no ports registered). * */ @@ -3624,7 +3996,15 @@ int ata_scsi_release(struct Scsi_Host *host) /** * ata_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized + * + * Utility function which initializes data_addr, error_addr, + * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, + * device_addr, status_addr, and command_addr to standard offsets + * relative to cmd_addr. + * + * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. */ + void ata_std_ports(struct ata_ioports *ioaddr) { ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; @@ -3666,6 +4046,20 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port) return probe_ent; } + + +/** + * ata_pci_init_native_mode - Initialize native-mode driver + * @pdev: pci device to be initialized + * @port: array[2] of pointers to port info structures. + * + * Utility function which allocates and initializes an + * ata_probe_ent structure for a standard dual-port + * PIO-based IDE controller. The returned ata_probe_ent + * structure can be passed to ata_device_add(). The returned + * ata_probe_ent structure should then be freed with kfree(). + */ + #ifdef CONFIG_PCI struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port) @@ -3747,10 +4141,19 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, * @port_info: Information from low-level host driver * @n_ports: Number of ports attached to host controller * + * This is a helper function which can be called from a driver's + * xxx_init_one() probe function if the hardware uses traditional + * IDE taskfile registers. + * + * This function calls pci_enable_device(), reserves its register + * regions, sets the dma mask, enables bus master mode, and calls + * ata_device_add() + * * LOCKING: * Inherited from PCI layer (may sleep). * * RETURNS: + * Zero on success, negative on errno-based value on error. * */ @@ -3905,10 +4308,6 @@ void ata_pci_remove_one (struct pci_dev *pdev) } free_irq(host_set->irq, host_set); - if (host_set->ops->host_stop) - host_set->ops->host_stop(host_set); - if (host_set->mmio_base) - iounmap(host_set->mmio_base); for (i = 0; i < host_set->n_ports; i++) { ap = host_set->ports[i]; @@ -3927,6 +4326,9 @@ void ata_pci_remove_one (struct pci_dev *pdev) scsi_host_put(ap->host); } + if (host_set->ops->host_stop) + host_set->ops->host_stop(host_set); + kfree(host_set); pci_release_regions(pdev); @@ -3970,15 +4372,6 @@ int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits) #endif /* CONFIG_PCI */ -/** - * ata_init - - * - * LOCKING: - * - * RETURNS: - * - */ - static int __init ata_init(void) { ata_wq = create_workqueue("ata"); @@ -4024,6 +4417,7 @@ EXPORT_SYMBOL_GPL(ata_chk_err); EXPORT_SYMBOL_GPL(ata_exec_command); EXPORT_SYMBOL_GPL(ata_port_start); EXPORT_SYMBOL_GPL(ata_port_stop); +EXPORT_SYMBOL_GPL(ata_host_stop); EXPORT_SYMBOL_GPL(ata_interrupt); EXPORT_SYMBOL_GPL(ata_qc_prep); EXPORT_SYMBOL_GPL(ata_bmdma_setup); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 4c96df060c3b..7a4adc4c8f09 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -347,7 +347,10 @@ int ata_scsi_slave_config(struct scsi_device *sdev) */ if ((dev->flags & ATA_DFLAG_LBA48) && ((dev->flags & ATA_DFLAG_LOCK_SECTORS) == 0)) { - sdev->host->max_sectors = 2048; + /* + * do not overwrite sdev->host->max_sectors, since + * other drives on this host may not support LBA48 + */ blk_queue_max_sectors(sdev->request_queue, 2048); } } @@ -944,7 +947,7 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, } /** - * ata_scsiop_noop - + * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 6518226b8f87..d90430bbb0de 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -26,7 +26,7 @@ #define __LIBATA_H__ #define DRV_NAME "libata" -#define DRV_VERSION "1.10" /* must be exactly four chars */ +#define DRV_VERSION "1.11" /* must be exactly four chars */ struct ata_scsi_args { u16 *id; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 579448222d69..3c97aa45772d 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -507,6 +507,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) int ret, i; unsigned int id, lun; unsigned long serial; + unsigned long flags; if (!CMD_SP(cmd)) return FAILED; @@ -519,7 +520,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) /* Check active list for command command. */ spin_unlock_irq(ha->host->host_lock); - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) { sp = ha->outstanding_cmds[i]; @@ -534,7 +535,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) sp->state)); DEBUG3(qla2x00_print_scsi_cmd(cmd);) - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); if (qla2x00_abort_command(ha, sp)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, ha->host_no)); @@ -543,20 +544,19 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) "mbx success.\n", __func__, ha->host_no)); ret = SUCCESS; } - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); break; } + spin_unlock_irqrestore(&ha->hardware_lock, flags); /* Wait for the command to be returned. */ if (ret == SUCCESS) { - spin_unlock(&ha->hardware_lock); if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) { qla_printk(KERN_ERR, ha, "scsi(%ld:%d:%d): Abort handler timed out -- %lx " "%x.\n", ha->host_no, id, lun, serial, ret); } - spin_lock(&ha->hardware_lock); } spin_lock_irq(ha->host->host_lock); @@ -588,6 +588,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) int status; srb_t *sp; struct scsi_cmnd *cmd; + unsigned long flags; status = 0; @@ -596,11 +597,11 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) * array */ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); sp = ha->outstanding_cmds[cnt]; if (sp) { cmd = sp->cmd; - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); if (cmd->device->id == t) { if (!qla2x00_eh_wait_on_command(ha, cmd)) { status = 1; @@ -608,7 +609,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) } } } else { - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); } } return (status); @@ -740,6 +741,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha) int status; srb_t *sp; struct scsi_cmnd *cmd; + unsigned long flags; status = 1; @@ -748,17 +750,17 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha) * array */ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); sp = ha->outstanding_cmds[cnt]; if (sp) { cmd = sp->cmd; - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); status = qla2x00_eh_wait_on_command(ha, cmd); if (status == 0) break; } else { - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); } } return (status); diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 69009f853a49..b0403ccd8a25 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -329,6 +329,8 @@ static void nv_host_stop (struct ata_host_set *host_set) host->host_desc->disable_hotplug(host_set); kfree(host); + + ata_host_stop(host_set); } static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 19a13e3590f4..b18c90582e67 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -122,6 +122,7 @@ static struct ata_port_operations pdc_ata_ops = { .scr_write = pdc_sata_scr_write, .port_start = pdc_port_start, .port_stop = pdc_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info pdc_port_info[] = { @@ -151,6 +152,8 @@ static struct ata_port_info pdc_port_info[] = { static struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3375, PCI_ANY_ID, PCI_ANY_ID, 0, 0, diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index dfd362104717..1383e8a28d72 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -536,6 +536,8 @@ static void qs_host_stop(struct ata_host_set *host_set) writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ + + ata_host_stop(host_set); } static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index f0489dc302a0..238580d244e6 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -82,6 +82,7 @@ static struct pci_device_id sil_pci_tbl[] = { { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { } /* terminate list */ }; @@ -160,6 +161,7 @@ static struct ata_port_operations sil_ops = { .scr_write = sil_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info sil_port_info[] = { diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 5105ddd08447..e418b89c6b9d 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -114,6 +114,7 @@ static struct ata_port_operations sis_ops = { .scr_write = sis_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info sis_port_info = { diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 8d1a5d25c053..edef1fa969fc 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -313,6 +313,7 @@ static struct ata_port_operations k2_sata_ops = { .scr_write = k2_sata_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base) @@ -395,7 +396,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e /* Clear a magic bit in SCR1 according to Darwin, those help * some funky seagate drives (though so far, those were already - * set by the firmware on the machines I had access to + * set by the firmware on the machines I had access to) */ writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, mmio_base + K2_SATA_SICR1_OFFSET); diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 70118650c461..140cea05de3f 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -245,6 +245,8 @@ static void pdc20621_host_stop(struct ata_host_set *host_set) iounmap(dimm_mmio); kfree(hpriv); + + ata_host_stop(host_set); } static int pdc_port_start(struct ata_port *ap) diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 0bff4f475f26..a71fb54eebd3 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -113,6 +113,7 @@ static struct ata_port_operations uli_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info uli_port_info = { diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 3a7830667277..f43183c19a12 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -134,6 +134,7 @@ static struct ata_port_operations svia_sata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info svia_port_info = { diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 2c28f0ad73c2..c5e09dc6f3de 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -21,6 +21,7 @@ #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/dma-mapping.h> #include "scsi.h" #include <scsi/scsi_host.h> #include <linux/libata.h> @@ -230,6 +231,7 @@ static struct ata_port_operations vsc_sata_ops = { .scr_write = vsc_sata_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index cca772624ae7..8d0d302844a1 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1197,6 +1197,7 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, if (!starget) return ERR_PTR(-ENOMEM); + get_device(&starget->dev); down(&shost->scan_mutex); res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata); if (res != SCSI_SCAN_LUN_PRESENT) diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 28966d05435c..67c6cc40ce16 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -35,7 +35,7 @@ #define SPI_PRINTK(x, l, f, a...) dev_printk(l, &(x)->dev, f , ##a) -#define SPI_NUM_ATTRS 10 /* increase this if you add attributes */ +#define SPI_NUM_ATTRS 13 /* increase this if you add attributes */ #define SPI_OTHER_ATTRS 1 /* Increase this if you add "always * on" attributes */ #define SPI_HOST_ATTRS 1 @@ -219,8 +219,11 @@ static int spi_setup_transport_attrs(struct device *dev) struct scsi_target *starget = to_scsi_target(dev); spi_period(starget) = -1; /* illegal value */ + spi_min_period(starget) = 0; spi_offset(starget) = 0; /* async */ + spi_max_offset(starget) = 255; spi_width(starget) = 0; /* narrow */ + spi_max_width(starget) = 1; spi_iu(starget) = 0; /* no IU */ spi_dt(starget) = 0; /* ST */ spi_qas(starget) = 0; @@ -235,6 +238,34 @@ static int spi_setup_transport_attrs(struct device *dev) return 0; } +#define spi_transport_show_simple(field, format_string) \ + \ +static ssize_t \ +show_spi_transport_##field(struct class_device *cdev, char *buf) \ +{ \ + struct scsi_target *starget = transport_class_to_starget(cdev); \ + struct spi_transport_attrs *tp; \ + \ + tp = (struct spi_transport_attrs *)&starget->starget_data; \ + return snprintf(buf, 20, format_string, tp->field); \ +} + +#define spi_transport_store_simple(field, format_string) \ + \ +static ssize_t \ +store_spi_transport_##field(struct class_device *cdev, const char *buf, \ + size_t count) \ +{ \ + int val; \ + struct scsi_target *starget = transport_class_to_starget(cdev); \ + struct spi_transport_attrs *tp; \ + \ + tp = (struct spi_transport_attrs *)&starget->starget_data; \ + val = simple_strtoul(buf, NULL, 0); \ + tp->field = val; \ + return count; \ +} + #define spi_transport_show_function(field, format_string) \ \ static ssize_t \ @@ -261,6 +292,25 @@ store_spi_transport_##field(struct class_device *cdev, const char *buf, \ struct spi_internal *i = to_spi_internal(shost->transportt); \ \ val = simple_strtoul(buf, NULL, 0); \ + i->f->set_##field(starget, val); \ + return count; \ +} + +#define spi_transport_store_max(field, format_string) \ +static ssize_t \ +store_spi_transport_##field(struct class_device *cdev, const char *buf, \ + size_t count) \ +{ \ + int val; \ + struct scsi_target *starget = transport_class_to_starget(cdev); \ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); \ + struct spi_internal *i = to_spi_internal(shost->transportt); \ + struct spi_transport_attrs *tp \ + = (struct spi_transport_attrs *)&starget->starget_data; \ + \ + val = simple_strtoul(buf, NULL, 0); \ + if (val > tp->max_##field) \ + val = tp->max_##field; \ i->f->set_##field(starget, val); \ return count; \ } @@ -272,9 +322,24 @@ static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \ show_spi_transport_##field, \ store_spi_transport_##field); +#define spi_transport_simple_attr(field, format_string) \ + spi_transport_show_simple(field, format_string) \ + spi_transport_store_simple(field, format_string) \ +static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \ + show_spi_transport_##field, \ + store_spi_transport_##field); + +#define spi_transport_max_attr(field, format_string) \ + spi_transport_show_function(field, format_string) \ + spi_transport_store_max(field, format_string) \ + spi_transport_simple_attr(max_##field, format_string) \ +static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \ + show_spi_transport_##field, \ + store_spi_transport_##field); + /* The Parallel SCSI Tranport Attributes: */ -spi_transport_rd_attr(offset, "%d\n"); -spi_transport_rd_attr(width, "%d\n"); +spi_transport_max_attr(offset, "%d\n"); +spi_transport_max_attr(width, "%d\n"); spi_transport_rd_attr(iu, "%d\n"); spi_transport_rd_attr(dt, "%d\n"); spi_transport_rd_attr(qas, "%d\n"); @@ -300,26 +365,18 @@ static CLASS_DEVICE_ATTR(revalidate, S_IWUSR, NULL, store_spi_revalidate); /* Translate the period into ns according to the current spec * for SDTR/PPR messages */ -static ssize_t show_spi_transport_period(struct class_device *cdev, char *buf) - +static ssize_t +show_spi_transport_period_helper(struct class_device *cdev, char *buf, + int period) { - struct scsi_target *starget = transport_class_to_starget(cdev); - struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); - struct spi_transport_attrs *tp; int len, picosec; - struct spi_internal *i = to_spi_internal(shost->transportt); - - tp = (struct spi_transport_attrs *)&starget->starget_data; - - if (i->f->get_period) - i->f->get_period(starget); - if (tp->period < 0 || tp->period > 0xff) { + if (period < 0 || period > 0xff) { picosec = -1; - } else if (tp->period <= SPI_STATIC_PPR) { - picosec = ppr_to_ps[tp->period]; + } else if (period <= SPI_STATIC_PPR) { + picosec = ppr_to_ps[period]; } else { - picosec = tp->period * 4000; + picosec = period * 4000; } if (picosec == -1) { @@ -334,12 +391,9 @@ static ssize_t show_spi_transport_period(struct class_device *cdev, char *buf) } static ssize_t -store_spi_transport_period(struct class_device *cdev, const char *buf, - size_t count) +store_spi_transport_period_helper(struct class_device *cdev, const char *buf, + size_t count, int *periodp) { - struct scsi_target *starget = transport_class_to_starget(cdev); - struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); - struct spi_internal *i = to_spi_internal(shost->transportt); int j, picosec, period = -1; char *endp; @@ -368,15 +422,79 @@ store_spi_transport_period(struct class_device *cdev, const char *buf, if (period > 0xff) period = 0xff; - i->f->set_period(starget, period); + *periodp = period; return count; } +static ssize_t +show_spi_transport_period(struct class_device *cdev, char *buf) +{ + struct scsi_target *starget = transport_class_to_starget(cdev); + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct spi_internal *i = to_spi_internal(shost->transportt); + struct spi_transport_attrs *tp = + (struct spi_transport_attrs *)&starget->starget_data; + + if (i->f->get_period) + i->f->get_period(starget); + + return show_spi_transport_period_helper(cdev, buf, tp->period); +} + +static ssize_t +store_spi_transport_period(struct class_device *cdev, const char *buf, + size_t count) +{ + struct scsi_target *starget = transport_class_to_starget(cdev); + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct spi_internal *i = to_spi_internal(shost->transportt); + struct spi_transport_attrs *tp = + (struct spi_transport_attrs *)&starget->starget_data; + int period, retval; + + retval = store_spi_transport_period_helper(cdev, buf, count, &period); + + if (period < tp->min_period) + period = tp->min_period; + + i->f->set_period(starget, period); + + return retval; +} + static CLASS_DEVICE_ATTR(period, S_IRUGO | S_IWUSR, show_spi_transport_period, store_spi_transport_period); +static ssize_t +show_spi_transport_min_period(struct class_device *cdev, char *buf) +{ + struct scsi_target *starget = transport_class_to_starget(cdev); + struct spi_transport_attrs *tp = + (struct spi_transport_attrs *)&starget->starget_data; + + return show_spi_transport_period_helper(cdev, buf, tp->min_period); +} + +static ssize_t +store_spi_transport_min_period(struct class_device *cdev, const char *buf, + size_t count) +{ + struct scsi_target *starget = transport_class_to_starget(cdev); + struct spi_transport_attrs *tp = + (struct spi_transport_attrs *)&starget->starget_data; + + return store_spi_transport_period_helper(cdev, buf, count, + &tp->min_period); +} + + +static CLASS_DEVICE_ATTR(min_period, S_IRUGO | S_IWUSR, + show_spi_transport_min_period, + store_spi_transport_min_period); + + static ssize_t show_spi_host_signalling(struct class_device *cdev, char *buf) { struct Scsi_Host *shost = transport_class_to_shost(cdev); @@ -642,6 +760,7 @@ spi_dv_device_internal(struct scsi_request *sreq, u8 *buffer) { struct spi_internal *i = to_spi_internal(sreq->sr_host->transportt); struct scsi_device *sdev = sreq->sr_device; + struct scsi_target *starget = sdev->sdev_target; int len = sdev->inquiry_len; /* first set us up for narrow async */ DV_SET(offset, 0); @@ -655,9 +774,11 @@ spi_dv_device_internal(struct scsi_request *sreq, u8 *buffer) } /* test width */ - if (i->f->set_width && sdev->wdtr) { + if (i->f->set_width && spi_max_width(starget) && sdev->wdtr) { i->f->set_width(sdev->sdev_target, 1); + printk("WIDTH IS %d\n", spi_max_width(starget)); + if (spi_dv_device_compare_inquiry(sreq, buffer, buffer + len, DV_LOOPS) @@ -684,8 +805,8 @@ spi_dv_device_internal(struct scsi_request *sreq, u8 *buffer) retry: /* now set up to the maximum */ - DV_SET(offset, 255); - DV_SET(period, 1); + DV_SET(offset, spi_max_offset(starget)); + DV_SET(period, spi_min_period(starget)); if (len == 0) { SPI_PRINTK(sdev->sdev_target, KERN_INFO, "Domain Validation skipping write tests\n"); @@ -892,6 +1013,16 @@ EXPORT_SYMBOL(spi_display_xfer_agreement); if (i->f->show_##field) \ count++ +#define SETUP_RELATED_ATTRIBUTE(field, rel_field) \ + i->private_attrs[count] = class_device_attr_##field; \ + if (!i->f->set_##rel_field) { \ + i->private_attrs[count].attr.mode = S_IRUGO; \ + i->private_attrs[count].store = NULL; \ + } \ + i->attrs[count] = &i->private_attrs[count]; \ + if (i->f->show_##rel_field) \ + count++ + #define SETUP_HOST_ATTRIBUTE(field) \ i->private_host_attrs[count] = class_device_attr_##field; \ if (!i->f->set_##field) { \ @@ -975,8 +1106,11 @@ spi_attach_transport(struct spi_function_template *ft) i->f = ft; SETUP_ATTRIBUTE(period); + SETUP_RELATED_ATTRIBUTE(min_period, period); SETUP_ATTRIBUTE(offset); + SETUP_RELATED_ATTRIBUTE(max_offset, offset); SETUP_ATTRIBUTE(width); + SETUP_RELATED_ATTRIBUTE(max_width, width); SETUP_ATTRIBUTE(iu); SETUP_ATTRIBUTE(dt); SETUP_ATTRIBUTE(qas); |