1 files changed, 0 insertions, 151 deletions
diff --git a/drivers/rtc/rtc-dm355evm.c b/drivers/rtc/rtc-dm355evm.c
deleted file mode 100644
index 94fb16ac3e0f..000000000000
--- a/drivers/rtc/rtc-dm355evm.c
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * rtc-dm355evm.c - access battery-backed counter in MSP430 firmware
- *
- * Copyright (c) 2008 by David Brownell
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/rtc.h>
-#include <linux/platform_device.h>
-
-#include <linux/mfd/dm355evm_msp.h>
-#include <linux/module.h>
-
-
-/*
- * The MSP430 firmware on the DM355 EVM uses a watch crystal to feed
- * a 1 Hz counter.  When a backup battery is supplied, that makes a
- * reasonable RTC for applications where alarms and non-NTP drift
- * compensation aren't important.
- *
- * The only real glitch is the inability to read or write all four
- * counter bytes atomically:  the count may increment in the middle
- * of an operation, causing trouble when the LSB rolls over.
- *
- * This driver was tested with firmware revision A4.
- */
-union evm_time {
-	u8	bytes[4];
-	u32	value;
-};
-
-static int dm355evm_rtc_read_time(struct device *dev, struct rtc_time *tm)
-{
-	union evm_time	time;
-	int		status;
-	int		tries = 0;
-
-	do {
-		/*
-		 * Read LSB(0) to MSB(3) bytes.  Defend against the counter
-		 * rolling over by re-reading until the value is stable,
-		 * and assuming the four reads take at most a few seconds.
-		 */
-		status = dm355evm_msp_read(DM355EVM_MSP_RTC_0);
-		if (status < 0)
-			return status;
-		if (tries && time.bytes[0] == status)
-			break;
-		time.bytes[0] = status;
-
-		status = dm355evm_msp_read(DM355EVM_MSP_RTC_1);
-		if (status < 0)
-			return status;
-		if (tries && time.bytes[1] == status)
-			break;
-		time.bytes[1] = status;
-
-		status = dm355evm_msp_read(DM355EVM_MSP_RTC_2);
-		if (status < 0)
-			return status;
-		if (tries && time.bytes[2] == status)
-			break;
-		time.bytes[2] = status;
-
-		status = dm355evm_msp_read(DM355EVM_MSP_RTC_3);
-		if (status < 0)
-			return status;
-		if (tries && time.bytes[3] == status)
-			break;
-		time.bytes[3] = status;
-
-	} while (++tries < 5);
-
-	dev_dbg(dev, "read timestamp %08x\n", time.value);
-
-	rtc_time64_to_tm(le32_to_cpu(time.value), tm);
-	return 0;
-}
-
-static int dm355evm_rtc_set_time(struct device *dev, struct rtc_time *tm)
-{
-	union evm_time	time;
-	unsigned long	value;
-	int		status;
-
-	value = rtc_tm_to_time64(tm);
-	time.value = cpu_to_le32(value);
-
-	dev_dbg(dev, "write timestamp %08x\n", time.value);
-
-	/*
-	 * REVISIT handle non-atomic writes ... maybe just retry until
-	 * byte[1] sticks (no rollover)?
-	 */
-	status = dm355evm_msp_write(time.bytes[0], DM355EVM_MSP_RTC_0);
-	if (status < 0)
-		return status;
-
-	status = dm355evm_msp_write(time.bytes[1], DM355EVM_MSP_RTC_1);
-	if (status < 0)
-		return status;
-
-	status = dm355evm_msp_write(time.bytes[2], DM355EVM_MSP_RTC_2);
-	if (status < 0)
-		return status;
-
-	status = dm355evm_msp_write(time.bytes[3], DM355EVM_MSP_RTC_3);
-	if (status < 0)
-		return status;
-
-	return 0;
-}
-
-static const struct rtc_class_ops dm355evm_rtc_ops = {
-	.read_time	= dm355evm_rtc_read_time,
-	.set_time	= dm355evm_rtc_set_time,
-};
-
-/*----------------------------------------------------------------------*/
-
-static int dm355evm_rtc_probe(struct platform_device *pdev)
-{
-	struct rtc_device *rtc;
-
-	rtc = devm_rtc_allocate_device(&pdev->dev);
-	if (IS_ERR(rtc))
-		return PTR_ERR(rtc);
-
-	platform_set_drvdata(pdev, rtc);
-
-	rtc->ops = &dm355evm_rtc_ops;
-	rtc->range_max = U32_MAX;
-
-	return devm_rtc_register_device(rtc);
-}
-
-/*
- * I2C is used to talk to the MSP430, but this platform device is
- * exposed by an MFD driver that manages I2C communications.
- */
-static struct platform_driver rtc_dm355evm_driver = {
-	.probe		= dm355evm_rtc_probe,
-	.driver		= {
-		.name	= "rtc-dm355evm",
-	},
-};
-
-module_platform_driver(rtc_dm355evm_driver);
-
-MODULE_LICENSE("GPL");