diff options
Diffstat (limited to 'drivers/pci')
-rw-r--r-- | drivers/pci/Kconfig | 22 | ||||
-rw-r--r-- | drivers/pci/controller/dwc/pci-imx6.c | 11 | ||||
-rw-r--r-- | drivers/pci/controller/dwc/pci-meson.c | 1 | ||||
-rw-r--r-- | drivers/pci/controller/dwc/pcie-armada8k.c | 16 | ||||
-rw-r--r-- | drivers/pci/controller/pcie-iproc-msi.c | 6 | ||||
-rw-r--r-- | drivers/pci/msi.c | 22 | ||||
-rw-r--r-- | drivers/pci/pci.c | 3 | ||||
-rw-r--r-- | drivers/pci/quirks.c | 5 | ||||
-rw-r--r-- | drivers/pci/switch/switchtec.c | 8 |
9 files changed, 41 insertions, 53 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 4310c7a4212e..2ab92409210a 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -21,13 +21,14 @@ menuconfig PCI support for PCI-X and the foundations for PCI Express support. Say 'Y' here unless you know what you are doing. +if PCI + config PCI_DOMAINS bool depends on PCI config PCI_DOMAINS_GENERIC bool - depends on PCI select PCI_DOMAINS config PCI_SYSCALL @@ -37,7 +38,6 @@ source "drivers/pci/pcie/Kconfig" config PCI_MSI bool "Message Signaled Interrupts (MSI and MSI-X)" - depends on PCI select GENERIC_MSI_IRQ help This allows device drivers to enable MSI (Message Signaled @@ -59,7 +59,6 @@ config PCI_MSI_IRQ_DOMAIN config PCI_QUIRKS default y bool "Enable PCI quirk workarounds" if EXPERT - depends on PCI help This enables workarounds for various PCI chipset bugs/quirks. Disable this only if your target machine is unaffected by PCI @@ -67,7 +66,7 @@ config PCI_QUIRKS config PCI_DEBUG bool "PCI Debugging" - depends on PCI && DEBUG_KERNEL + depends on DEBUG_KERNEL help Say Y here if you want the PCI core to produce a bunch of debug messages to the system log. Select this if you are having a @@ -77,7 +76,6 @@ config PCI_DEBUG config PCI_REALLOC_ENABLE_AUTO bool "Enable PCI resource re-allocation detection" - depends on PCI depends on PCI_IOV help Say Y here if you want the PCI core to detect if PCI resource @@ -90,7 +88,6 @@ config PCI_REALLOC_ENABLE_AUTO config PCI_STUB tristate "PCI Stub driver" - depends on PCI help Say Y or M here if you want be able to reserve a PCI device when it is going to be assigned to a guest operating system. @@ -99,7 +96,6 @@ config PCI_STUB config PCI_PF_STUB tristate "PCI PF Stub driver" - depends on PCI depends on PCI_IOV help Say Y or M here if you want to enable support for devices that @@ -111,7 +107,7 @@ config PCI_PF_STUB config XEN_PCIDEV_FRONTEND tristate "Xen PCI Frontend" - depends on PCI && X86 && XEN + depends on X86 && XEN select PCI_XEN select XEN_XENBUS_FRONTEND default y @@ -133,7 +129,6 @@ config PCI_BRIDGE_EMUL config PCI_IOV bool "PCI IOV support" - depends on PCI select PCI_ATS help I/O Virtualization is a PCI feature supported by some devices @@ -144,7 +139,6 @@ config PCI_IOV config PCI_PRI bool "PCI PRI support" - depends on PCI select PCI_ATS help PRI is the PCI Page Request Interface. It allows PCI devices that are @@ -154,7 +148,6 @@ config PCI_PRI config PCI_PASID bool "PCI PASID support" - depends on PCI select PCI_ATS help Process Address Space Identifiers (PASIDs) can be used by PCI devices @@ -167,7 +160,7 @@ config PCI_PASID config PCI_P2PDMA bool "PCI peer-to-peer transfer support" - depends on PCI && ZONE_DEVICE + depends on ZONE_DEVICE select GENERIC_ALLOCATOR help Enableѕ drivers to do PCI peer-to-peer transactions to and from @@ -184,12 +177,11 @@ config PCI_P2PDMA config PCI_LABEL def_bool y if (DMI || ACPI) - depends on PCI select NLS config PCI_HYPERV tristate "Hyper-V PCI Frontend" - depends on PCI && X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64 + depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64 help The PCI device frontend driver allows the kernel to import arbitrary PCI devices from a PCI backend to support PCI driver domains. @@ -198,3 +190,5 @@ source "drivers/pci/hotplug/Kconfig" source "drivers/pci/controller/Kconfig" source "drivers/pci/endpoint/Kconfig" source "drivers/pci/switch/Kconfig" + +endif diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 52e47dac028f..80f843030e36 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -310,6 +310,9 @@ static int imx6_pcie_attach_pd(struct device *dev) imx6_pcie->pd_pcie = dev_pm_domain_attach_by_name(dev, "pcie"); if (IS_ERR(imx6_pcie->pd_pcie)) return PTR_ERR(imx6_pcie->pd_pcie); + /* Do nothing when power domain missing */ + if (!imx6_pcie->pd_pcie) + return 0; link = device_link_add(dev, imx6_pcie->pd_pcie, DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME | @@ -323,13 +326,13 @@ static int imx6_pcie_attach_pd(struct device *dev) if (IS_ERR(imx6_pcie->pd_pcie_phy)) return PTR_ERR(imx6_pcie->pd_pcie_phy); - device_link_add(dev, imx6_pcie->pd_pcie_phy, + link = device_link_add(dev, imx6_pcie->pd_pcie_phy, DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE); - if (IS_ERR(link)) { - dev_err(dev, "Failed to add device_link to pcie_phy pd: %ld\n", PTR_ERR(link)); - return PTR_ERR(link); + if (!link) { + dev_err(dev, "Failed to add device_link to pcie_phy pd.\n"); + return -EINVAL; } return 0; diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c index 241ebe0c4505..e35e9eaa50ee 100644 --- a/drivers/pci/controller/dwc/pci-meson.c +++ b/drivers/pci/controller/dwc/pci-meson.c @@ -8,6 +8,7 @@ #include <linux/clk.h> #include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/pci.h> diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c index b171b6bc15c8..0c389a30ef5d 100644 --- a/drivers/pci/controller/dwc/pcie-armada8k.c +++ b/drivers/pci/controller/dwc/pcie-armada8k.c @@ -22,7 +22,6 @@ #include <linux/resource.h> #include <linux/of_pci.h> #include <linux/of_irq.h> -#include <linux/gpio/consumer.h> #include "pcie-designware.h" @@ -30,7 +29,6 @@ struct armada8k_pcie { struct dw_pcie *pci; struct clk *clk; struct clk *clk_reg; - struct gpio_desc *reset_gpio; }; #define PCIE_VENDOR_REGS_OFFSET 0x8000 @@ -139,12 +137,6 @@ static int armada8k_pcie_host_init(struct pcie_port *pp) struct dw_pcie *pci = to_dw_pcie_from_pp(pp); struct armada8k_pcie *pcie = to_armada8k_pcie(pci); - if (pcie->reset_gpio) { - /* assert and then deassert the reset signal */ - gpiod_set_value_cansleep(pcie->reset_gpio, 1); - msleep(100); - gpiod_set_value_cansleep(pcie->reset_gpio, 0); - } dw_pcie_setup_rc(pp); armada8k_pcie_establish_link(pcie); @@ -257,14 +249,6 @@ static int armada8k_pcie_probe(struct platform_device *pdev) goto fail_clkreg; } - /* Get reset gpio signal and hold asserted (logically high) */ - pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", - GPIOD_OUT_HIGH); - if (IS_ERR(pcie->reset_gpio)) { - ret = PTR_ERR(pcie->reset_gpio); - goto fail_clkreg; - } - platform_set_drvdata(pdev, pcie); ret = armada8k_add_pcie_port(pcie, pdev); diff --git a/drivers/pci/controller/pcie-iproc-msi.c b/drivers/pci/controller/pcie-iproc-msi.c index 9deb56989d72..cb3401a931f8 100644 --- a/drivers/pci/controller/pcie-iproc-msi.c +++ b/drivers/pci/controller/pcie-iproc-msi.c @@ -602,9 +602,9 @@ int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node) } /* Reserve memory for event queue and make sure memories are zeroed */ - msi->eq_cpu = dma_zalloc_coherent(pcie->dev, - msi->nr_eq_region * EQ_MEM_REGION_SIZE, - &msi->eq_dma, GFP_KERNEL); + msi->eq_cpu = dma_alloc_coherent(pcie->dev, + msi->nr_eq_region * EQ_MEM_REGION_SIZE, + &msi->eq_dma, GFP_KERNEL); if (!msi->eq_cpu) { ret = -ENOMEM; goto free_irqs; diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 7a1c8a09efa5..4c0b47867258 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -1168,7 +1168,8 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs, const struct irq_affinity *affd) { static const struct irq_affinity msi_default_affd; - int vecs = -ENOSPC; + int msix_vecs = -ENOSPC; + int msi_vecs = -ENOSPC; if (flags & PCI_IRQ_AFFINITY) { if (!affd) @@ -1179,16 +1180,17 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs, } if (flags & PCI_IRQ_MSIX) { - vecs = __pci_enable_msix_range(dev, NULL, min_vecs, max_vecs, - affd); - if (vecs > 0) - return vecs; + msix_vecs = __pci_enable_msix_range(dev, NULL, min_vecs, + max_vecs, affd); + if (msix_vecs > 0) + return msix_vecs; } if (flags & PCI_IRQ_MSI) { - vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, affd); - if (vecs > 0) - return vecs; + msi_vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, + affd); + if (msi_vecs > 0) + return msi_vecs; } /* use legacy irq if allowed */ @@ -1199,7 +1201,9 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs, } } - return vecs; + if (msix_vecs == -ENOSPC) + return -ENOSPC; + return msi_vecs; } EXPORT_SYMBOL(pci_alloc_irq_vectors_affinity); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index c9d8e3c837de..c25acace7d91 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -6195,7 +6195,8 @@ static int __init pci_setup(char *str) } else if (!strncmp(str, "pcie_scan_all", 13)) { pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS); } else if (!strncmp(str, "disable_acs_redir=", 18)) { - disable_acs_redir_param = str + 18; + disable_acs_redir_param = + kstrdup(str + 18, GFP_KERNEL); } else { printk(KERN_ERR "PCI: Unknown option `%s'\n", str); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index b0a413f3f7ca..e2a879e93d86 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -639,8 +639,9 @@ static void quirk_synopsys_haps(struct pci_dev *pdev) break; } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SYNOPSYS, PCI_ANY_ID, - quirk_synopsys_haps); +DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, PCI_ANY_ID, + PCI_CLASS_SERIAL_USB_XHCI, 0, + quirk_synopsys_haps); /* * Let's make the southbridge information explicit instead of having to diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c index 6c5536d3d42a..e22766c79fe9 100644 --- a/drivers/pci/switch/switchtec.c +++ b/drivers/pci/switch/switchtec.c @@ -1373,10 +1373,10 @@ static int switchtec_init_pci(struct switchtec_dev *stdev, if (ioread32(&stdev->mmio_mrpc->dma_ver) == 0) return 0; - stdev->dma_mrpc = dma_zalloc_coherent(&stdev->pdev->dev, - sizeof(*stdev->dma_mrpc), - &stdev->dma_mrpc_dma_addr, - GFP_KERNEL); + stdev->dma_mrpc = dma_alloc_coherent(&stdev->pdev->dev, + sizeof(*stdev->dma_mrpc), + &stdev->dma_mrpc_dma_addr, + GFP_KERNEL); if (stdev->dma_mrpc == NULL) return -ENOMEM; |