summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/bonding/bonding.h2
-rw-r--r--drivers/net/ethernet/8390/ax88796.c2
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c2
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_ethtool.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/eq.c2
-rw-r--r--drivers/net/ethernet/micrel/ksz884x.c2
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h2
-rw-r--r--drivers/net/sungem_phy.c8
-rw-r--r--drivers/net/wimax/i2400m/debugfs.c1
-rw-r--r--drivers/net/wireless/atmel.c2
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.h2
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.c2
12 files changed, 15 insertions, 14 deletions
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 6dded569b111..21b68e5c14fd 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -245,7 +245,7 @@ struct bonding {
struct delayed_work ad_work;
struct delayed_work mcast_work;
#ifdef CONFIG_DEBUG_FS
- /* debugging suport via debugfs */
+ /* debugging support via debugfs */
struct dentry *debug_dir;
#endif /* CONFIG_DEBUG_FS */
};
diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index 0338352bc036..70dba5d01ad3 100644
--- a/drivers/net/ethernet/8390/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -109,7 +109,7 @@ static inline struct ax_device *to_ax_dev(struct net_device *dev)
/*
* ax_initial_check
*
- * do an initial probe for the card to check wether it exists
+ * do an initial probe for the card to check whether it exists
* and is functional
*/
static int ax_initial_check(struct net_device *dev)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index b8b4b749daab..09b625e0fdaa 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -4318,7 +4318,7 @@ static int bnx2x_queue_comp_cmd(struct bnx2x *bp,
if (o->next_tx_only >= o->max_cos)
/* >= becuase tx only must always be smaller than cos since the
- * primary connection suports COS 0
+ * primary connection supports COS 0
*/
BNX2X_ERR("illegal value for next tx_only: %d. max cos was %d",
o->next_tx_only, o->max_cos);
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index 9089d00f1421..14e30515f6aa 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -1671,7 +1671,7 @@ static void e1000_get_wol(struct net_device *netdev,
/* apply any specific unsupported masks here */
switch (hw->device_id) {
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
- /* KSP3 does not suppport UCAST wake-ups */
+ /* KSP3 does not support UCAST wake-ups */
wol->supported &= ~WAKE_UCAST;
if (adapter->wol & E1000_WUFC_EX)
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index b84a88bc44dc..c48cf6f6529c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -1267,7 +1267,7 @@ int mlx4_test_interrupts(struct mlx4_dev *dev)
/* Temporary use polling for command completions */
mlx4_cmd_use_polling(dev);
- /* Map the new eq to handle all asyncronous events */
+ /* Map the new eq to handle all asynchronous events */
err = mlx4_MAP_EQ(dev, get_async_ev_mask(dev), 0,
priv->eq_table.eq[i].eqn);
if (err) {
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index 093d594435e1..83f0ea929d3d 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -6769,7 +6769,7 @@ static int stp;
/*
* This enables fast aging in the KSZ8842 switch. Not sure what situation
* needs that. However, fast aging is used to flush the dynamic MAC table when
- * STP suport is enabled.
+ * STP support is enabled.
*/
static int fast_aging;
diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
index 7ec4b864a550..75ec5e7cf50d 100644
--- a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
@@ -27,7 +27,7 @@ struct mcp_gen_header {
*
* Fields below this comment are extensions added in later versions
* of this struct, drivers should compare the header_length against
- * offsetof(field) to check wether a given MCP implements them.
+ * offsetof(field) to check whether a given MCP implements them.
*
* Never remove any field. Keep everything naturally align.
*/
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 58f13adaa549..ae7cd7f3656d 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -608,7 +608,7 @@ static int bcm5421_poll_link(struct mii_phy* phy)
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
- /* try to find out wether we have a link */
+ /* try to find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -634,7 +634,7 @@ static int bcm5421_read_link(struct mii_phy* phy)
phy->speed = SPEED_1000;
- /* find out wether we are running half- or full duplex */
+ /* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -681,7 +681,7 @@ static int bcm5461_poll_link(struct mii_phy* phy)
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
- /* find out wether we have a link */
+ /* find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -710,7 +710,7 @@ static int bcm5461_read_link(struct mii_phy* phy)
phy->speed = SPEED_1000;
- /* find out wether we are running half- or full duplex */
+ /* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c
index 4b66ab1d0e5c..6702da838b0e 100644
--- a/drivers/net/wimax/i2400m/debugfs.c
+++ b/drivers/net/wimax/i2400m/debugfs.c
@@ -209,6 +209,7 @@ int debugfs_i2400m_reset_set(void *data, u64 val)
result = i2400m_reset(i2400m, rt);
if (result >= 0)
result = 0;
+ break;
default:
result = -EINVAL;
}
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 4a4e98f71807..4374079dfc2a 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -2963,7 +2963,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc)
ssid_el_p[1] = priv->SSID_size;
memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
ssid_el_p[2 + priv->SSID_size] = WLAN_EID_SUPP_RATES;
- ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */
+ ssid_el_p[3 + priv->SSID_size] = 4; /* len of supported rates */
memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.h b/drivers/net/wireless/ipw2x00/ipw2100.h
index 973125242490..5fe17cbab1f3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.h
+++ b/drivers/net/wireless/ipw2x00/ipw2100.h
@@ -1045,7 +1045,7 @@ typedef enum _ORDINAL_TABLE_1 { // NS - means Not Supported by FW
IPW_ORD_POWER_MGMT_MODE, // Power mode - 0=CAM, 1=PSP
IPW_ORD_POWER_MGMT_INDEX, //NS //
IPW_ORD_COUNTRY_CODE, // IEEE country code as recv'd from beacon
- IPW_ORD_COUNTRY_CHANNELS, // channels suported by country
+ IPW_ORD_COUNTRY_CHANNELS, // channels supported by country
// IPW_ORD_COUNTRY_CHANNELS:
// For 11b the lower 2-byte are used for channels from 1-14
// and the higher 2-byte are not used.
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index ff306d763e37..71ab320fae82 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -1155,7 +1155,7 @@ int zd_chip_init_hw(struct zd_chip *chip)
if (r)
goto out;
/* Currently we support IEEE 802.11g for full and high speed USB.
- * It might be discussed, whether we should suppport pure b mode for
+ * It might be discussed, whether we should support pure b mode for
* full speed USB.
*/
r = set_mandatory_rates(chip, 1);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 13:00:06 +0000