diff options
Diffstat (limited to 'drivers/net/wireless/broadcom/b43/phy_common.c')
| -rw-r--r-- | drivers/net/wireless/broadcom/b43/phy_common.c | 653 |
1 files changed, 653 insertions, 0 deletions
diff --git a/drivers/net/wireless/broadcom/b43/phy_common.c b/drivers/net/wireless/broadcom/b43/phy_common.c new file mode 100644 index 000000000000..ec2b9c577b90 --- /dev/null +++ b/drivers/net/wireless/broadcom/b43/phy_common.c @@ -0,0 +1,653 @@ +/* + + Broadcom B43 wireless driver + Common PHY routines + + Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, + Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> + Copyright (c) 2005-2008 Michael Buesch <m@bues.ch> + Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> + Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include "phy_common.h" +#include "phy_g.h" +#include "phy_a.h" +#include "phy_n.h" +#include "phy_lp.h" +#include "phy_ht.h" +#include "phy_lcn.h" +#include "phy_ac.h" +#include "b43.h" +#include "main.h" + + +int b43_phy_allocate(struct b43_wldev *dev) +{ + struct b43_phy *phy = &(dev->phy); + int err; + + phy->ops = NULL; + + switch (phy->type) { + case B43_PHYTYPE_G: +#ifdef CONFIG_B43_PHY_G + phy->ops = &b43_phyops_g; +#endif + break; + case B43_PHYTYPE_N: +#ifdef CONFIG_B43_PHY_N + phy->ops = &b43_phyops_n; +#endif + break; + case B43_PHYTYPE_LP: +#ifdef CONFIG_B43_PHY_LP + phy->ops = &b43_phyops_lp; +#endif + break; + case B43_PHYTYPE_HT: +#ifdef CONFIG_B43_PHY_HT + phy->ops = &b43_phyops_ht; +#endif + break; + case B43_PHYTYPE_LCN: +#ifdef CONFIG_B43_PHY_LCN + phy->ops = &b43_phyops_lcn; +#endif + break; + case B43_PHYTYPE_AC: +#ifdef CONFIG_B43_PHY_AC + phy->ops = &b43_phyops_ac; +#endif + break; + } + if (B43_WARN_ON(!phy->ops)) + return -ENODEV; + + err = phy->ops->allocate(dev); + if (err) + phy->ops = NULL; + + return err; +} + +void b43_phy_free(struct b43_wldev *dev) +{ + dev->phy.ops->free(dev); + dev->phy.ops = NULL; +} + +int b43_phy_init(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + const struct b43_phy_operations *ops = phy->ops; + int err; + + /* During PHY init we need to use some channel. On the first init this + * function is called *before* b43_op_config, so our pointer is NULL. + */ + if (!phy->chandef) { + phy->chandef = &dev->wl->hw->conf.chandef; + phy->channel = phy->chandef->chan->hw_value; + } + + phy->ops->switch_analog(dev, true); + b43_software_rfkill(dev, false); + + err = ops->init(dev); + if (err) { + b43err(dev->wl, "PHY init failed\n"); + goto err_block_rf; + } + phy->do_full_init = false; + + err = b43_switch_channel(dev, phy->channel); + if (err) { + b43err(dev->wl, "PHY init: Channel switch to default failed\n"); + goto err_phy_exit; + } + + return 0; + +err_phy_exit: + phy->do_full_init = true; + if (ops->exit) + ops->exit(dev); +err_block_rf: + b43_software_rfkill(dev, true); + + return err; +} + +void b43_phy_exit(struct b43_wldev *dev) +{ + const struct b43_phy_operations *ops = dev->phy.ops; + + b43_software_rfkill(dev, true); + dev->phy.do_full_init = true; + if (ops->exit) + ops->exit(dev); +} + +bool b43_has_hardware_pctl(struct b43_wldev *dev) +{ + if (!dev->phy.hardware_power_control) + return false; + if (!dev->phy.ops->supports_hwpctl) + return false; + return dev->phy.ops->supports_hwpctl(dev); +} + +void b43_radio_lock(struct b43_wldev *dev) +{ + u32 macctl; + +#if B43_DEBUG + B43_WARN_ON(dev->phy.radio_locked); + dev->phy.radio_locked = true; +#endif + + macctl = b43_read32(dev, B43_MMIO_MACCTL); + macctl |= B43_MACCTL_RADIOLOCK; + b43_write32(dev, B43_MMIO_MACCTL, macctl); + /* Commit the write and wait for the firmware + * to finish any radio register access. */ + b43_read32(dev, B43_MMIO_MACCTL); + udelay(10); +} + +void b43_radio_unlock(struct b43_wldev *dev) +{ + u32 macctl; + +#if B43_DEBUG + B43_WARN_ON(!dev->phy.radio_locked); + dev->phy.radio_locked = false; +#endif + + /* Commit any write */ + b43_read16(dev, B43_MMIO_PHY_VER); + /* unlock */ + macctl = b43_read32(dev, B43_MMIO_MACCTL); + macctl &= ~B43_MACCTL_RADIOLOCK; + b43_write32(dev, B43_MMIO_MACCTL, macctl); +} + +void b43_phy_lock(struct b43_wldev *dev) +{ +#if B43_DEBUG + B43_WARN_ON(dev->phy.phy_locked); + dev->phy.phy_locked = true; +#endif + B43_WARN_ON(dev->dev->core_rev < 3); + + if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) + b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); +} + +void b43_phy_unlock(struct b43_wldev *dev) +{ +#if B43_DEBUG + B43_WARN_ON(!dev->phy.phy_locked); + dev->phy.phy_locked = false; +#endif + B43_WARN_ON(dev->dev->core_rev < 3); + + if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) + b43_power_saving_ctl_bits(dev, 0); +} + +static inline void assert_mac_suspended(struct b43_wldev *dev) +{ + if (!B43_DEBUG) + return; + if ((b43_status(dev) >= B43_STAT_INITIALIZED) && + (dev->mac_suspended <= 0)) { + b43dbg(dev->wl, "PHY/RADIO register access with " + "enabled MAC.\n"); + dump_stack(); + } +} + +u16 b43_radio_read(struct b43_wldev *dev, u16 reg) +{ + assert_mac_suspended(dev); + dev->phy.writes_counter = 0; + return dev->phy.ops->radio_read(dev, reg); +} + +void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + assert_mac_suspended(dev); + if (b43_bus_host_is_pci(dev->dev) && + ++dev->phy.writes_counter > B43_MAX_WRITES_IN_ROW) { + b43_read32(dev, B43_MMIO_MACCTL); + dev->phy.writes_counter = 1; + } + dev->phy.ops->radio_write(dev, reg, value); +} + +void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask) +{ + b43_radio_write16(dev, offset, + b43_radio_read16(dev, offset) & mask); +} + +void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set) +{ + b43_radio_write16(dev, offset, + b43_radio_read16(dev, offset) | set); +} + +void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) +{ + b43_radio_write16(dev, offset, + (b43_radio_read16(dev, offset) & mask) | set); +} + +bool b43_radio_wait_value(struct b43_wldev *dev, u16 offset, u16 mask, + u16 value, int delay, int timeout) +{ + u16 val; + int i; + + for (i = 0; i < timeout; i += delay) { + val = b43_radio_read(dev, offset); + if ((val & mask) == value) + return true; + udelay(delay); + } + return false; +} + +u16 b43_phy_read(struct b43_wldev *dev, u16 reg) +{ + assert_mac_suspended(dev); + dev->phy.writes_counter = 0; + + if (dev->phy.ops->phy_read) + return dev->phy.ops->phy_read(dev, reg); + + b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + assert_mac_suspended(dev); + if (b43_bus_host_is_pci(dev->dev) && + ++dev->phy.writes_counter > B43_MAX_WRITES_IN_ROW) { + b43_read16(dev, B43_MMIO_PHY_VER); + dev->phy.writes_counter = 1; + } + + if (dev->phy.ops->phy_write) + return dev->phy.ops->phy_write(dev, reg, value); + + b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg) +{ + b43_phy_write(dev, destreg, b43_phy_read(dev, srcreg)); +} + +void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask) +{ + if (dev->phy.ops->phy_maskset) { + assert_mac_suspended(dev); + dev->phy.ops->phy_maskset(dev, offset, mask, 0); + } else { + b43_phy_write(dev, offset, + b43_phy_read(dev, offset) & mask); + } +} + +void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set) +{ + if (dev->phy.ops->phy_maskset) { + assert_mac_suspended(dev); + dev->phy.ops->phy_maskset(dev, offset, 0xFFFF, set); + } else { + b43_phy_write(dev, offset, + b43_phy_read(dev, offset) | set); + } +} + +void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) +{ + if (dev->phy.ops->phy_maskset) { + assert_mac_suspended(dev); + dev->phy.ops->phy_maskset(dev, offset, mask, set); + } else { + b43_phy_write(dev, offset, + (b43_phy_read(dev, offset) & mask) | set); + } +} + +void b43_phy_put_into_reset(struct b43_wldev *dev) +{ + u32 tmp; + + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL); + tmp &= ~B43_BCMA_IOCTL_GMODE; + tmp |= B43_BCMA_IOCTL_PHY_RESET; + tmp |= BCMA_IOCTL_FGC; + bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp); + udelay(1); + + tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL); + tmp &= ~BCMA_IOCTL_FGC; + bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp); + udelay(1); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW); + tmp &= ~B43_TMSLOW_GMODE; + tmp |= B43_TMSLOW_PHYRESET; + tmp |= SSB_TMSLOW_FGC; + ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp); + usleep_range(1000, 2000); + + tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW); + tmp &= ~SSB_TMSLOW_FGC; + ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp); + usleep_range(1000, 2000); + + break; +#endif + } +} + +void b43_phy_take_out_of_reset(struct b43_wldev *dev) +{ + u32 tmp; + + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + /* Unset reset bit (with forcing clock) */ + tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL); + tmp &= ~B43_BCMA_IOCTL_PHY_RESET; + tmp &= ~B43_BCMA_IOCTL_PHY_CLKEN; + tmp |= BCMA_IOCTL_FGC; + bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp); + udelay(1); + + /* Do not force clock anymore */ + tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL); + tmp &= ~BCMA_IOCTL_FGC; + tmp |= B43_BCMA_IOCTL_PHY_CLKEN; + bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp); + udelay(1); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + /* Unset reset bit (with forcing clock) */ + tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW); + tmp &= ~B43_TMSLOW_PHYRESET; + tmp &= ~B43_TMSLOW_PHYCLKEN; + tmp |= SSB_TMSLOW_FGC; + ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp); + ssb_read32(dev->dev->sdev, SSB_TMSLOW); /* flush */ + usleep_range(1000, 2000); + + tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW); + tmp &= ~SSB_TMSLOW_FGC; + tmp |= B43_TMSLOW_PHYCLKEN; + ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp); + ssb_read32(dev->dev->sdev, SSB_TMSLOW); /* flush */ + usleep_range(1000, 2000); + break; +#endif + } +} + +int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel) +{ + struct b43_phy *phy = &(dev->phy); + u16 channelcookie, savedcookie; + int err; + + /* First we set the channel radio code to prevent the + * firmware from sending ghost packets. + */ + channelcookie = new_channel; + if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) + channelcookie |= B43_SHM_SH_CHAN_5GHZ; + /* FIXME: set 40Mhz flag if required */ + if (0) + channelcookie |= B43_SHM_SH_CHAN_40MHZ; + savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie); + + /* Now try to switch the PHY hardware channel. */ + err = phy->ops->switch_channel(dev, new_channel); + if (err) + goto err_restore_cookie; + + /* Wait for the radio to tune to the channel and stabilize. */ + msleep(8); + + return 0; + +err_restore_cookie: + b43_shm_write16(dev, B43_SHM_SHARED, + B43_SHM_SH_CHAN, savedcookie); + + return err; +} + +void b43_software_rfkill(struct b43_wldev *dev, bool blocked) +{ + struct b43_phy *phy = &dev->phy; + + b43_mac_suspend(dev); + phy->ops->software_rfkill(dev, blocked); + phy->radio_on = !blocked; + b43_mac_enable(dev); +} + +/** + * b43_phy_txpower_adjust_work - TX power workqueue. + * + * Workqueue for updating the TX power parameters in hardware. + */ +void b43_phy_txpower_adjust_work(struct work_struct *work) +{ + struct b43_wl *wl = container_of(work, struct b43_wl, + txpower_adjust_work); + struct b43_wldev *dev; + + mutex_lock(&wl->mutex); + dev = wl->current_dev; + + if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED))) + dev->phy.ops->adjust_txpower(dev); + + mutex_unlock(&wl->mutex); +} + +void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags) +{ + struct b43_phy *phy = &dev->phy; + unsigned long now = jiffies; + enum b43_txpwr_result result; + + if (!(flags & B43_TXPWR_IGNORE_TIME)) { + /* Check if it's time for a TXpower check. */ + if (time_before(now, phy->next_txpwr_check_time)) + return; /* Not yet */ + } + /* The next check will be needed in two seconds, or later. */ + phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2)); + + if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) && + (dev->dev->board_type == SSB_BOARD_BU4306)) + return; /* No software txpower adjustment needed */ + + result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI)); + if (result == B43_TXPWR_RES_DONE) + return; /* We are done. */ + B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST); + B43_WARN_ON(phy->ops->adjust_txpower == NULL); + + /* We must adjust the transmission power in hardware. + * Schedule b43_phy_txpower_adjust_work(). */ + ieee80211_queue_work(dev->wl->hw, &dev->wl->txpower_adjust_work); +} + +int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset) +{ + const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK); + unsigned int a, b, c, d; + unsigned int average; + u32 tmp; + + tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset); + a = tmp & 0xFF; + b = (tmp >> 8) & 0xFF; + c = (tmp >> 16) & 0xFF; + d = (tmp >> 24) & 0xFF; + if (a == 0 || a == B43_TSSI_MAX || + b == 0 || b == B43_TSSI_MAX || + c == 0 || c == B43_TSSI_MAX || + d == 0 || d == B43_TSSI_MAX) + return -ENOENT; + /* The values are OK. Clear them. */ + tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) | + (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24); + b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp); + + if (is_ofdm) { + a = (a + 32) & 0x3F; + b = (b + 32) & 0x3F; + c = (c + 32) & 0x3F; + d = (d + 32) & 0x3F; + } + + /* Get the average of the values with 0.5 added to each value. */ + average = (a + b + c + d + 2) / 4; + if (is_ofdm) { + /* Adjust for CCK-boost */ + if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF1) + & B43_HF_CCKBOOST) + average = (average >= 13) ? (average - 13) : 0; + } + + return average; +} + +void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on) +{ + b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4); +} + + +bool b43_is_40mhz(struct b43_wldev *dev) +{ + return dev->phy.chandef->width == NL80211_CHAN_WIDTH_40; +} + +/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */ +void b43_phy_force_clock(struct b43_wldev *dev, bool force) +{ + u32 tmp; + + WARN_ON(dev->phy.type != B43_PHYTYPE_N && + dev->phy.type != B43_PHYTYPE_HT && + dev->phy.type != B43_PHYTYPE_AC); + + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL); + if (force) + tmp |= BCMA_IOCTL_FGC; + else + tmp &= ~BCMA_IOCTL_FGC; + bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW); + if (force) + tmp |= SSB_TMSLOW_FGC; + else + tmp &= ~SSB_TMSLOW_FGC; + ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp); + break; +#endif + } +} + +/* http://bcm-v4.sipsolutions.net/802.11/PHY/Cordic */ +struct b43_c32 b43_cordic(int theta) +{ + static const u32 arctg[] = { + 2949120, 1740967, 919879, 466945, 234379, 117304, + 58666, 29335, 14668, 7334, 3667, 1833, + 917, 458, 229, 115, 57, 29, + }; + u8 i; + s32 tmp; + s8 signx = 1; + u32 angle = 0; + struct b43_c32 ret = { .i = 39797, .q = 0, }; + + while (theta > (180 << 16)) + theta -= (360 << 16); + while (theta < -(180 << 16)) + theta += (360 << 16); + + if (theta > (90 << 16)) { + theta -= (180 << 16); + signx = -1; + } else if (theta < -(90 << 16)) { + theta += (180 << 16); + signx = -1; + } + + for (i = 0; i <= 17; i++) { + if (theta > angle) { + tmp = ret.i - (ret.q >> i); + ret.q += ret.i >> i; + ret.i = tmp; + angle += arctg[i]; + } else { + tmp = ret.i + (ret.q >> i); + ret.q -= ret.i >> i; + ret.i = tmp; + angle -= arctg[i]; + } + } + + ret.i *= signx; + ret.q *= signx; + + return ret; +} |