diff options
Diffstat (limited to 'drivers/net/phy/realtek.c')
| -rw-r--r-- | drivers/net/phy/realtek.c | 132 |
1 files changed, 132 insertions, 0 deletions
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 99ecd6c4c15a..821e85a97367 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -60,6 +60,9 @@ #define RTL_LPADV_5000FULL BIT(6) #define RTL_LPADV_2500FULL BIT(5) +#define RTL9000A_GINMR 0x14 +#define RTL9000A_GINMR_LINK_STATUS BIT(4) + #define RTLGEN_SPEED_MASK 0x0630 #define RTL_GENERIC_PHYID 0x001cc800 @@ -655,6 +658,122 @@ static int rtlgen_resume(struct phy_device *phydev) return ret; } +static int rtl9000a_config_init(struct phy_device *phydev) +{ + phydev->autoneg = AUTONEG_DISABLE; + phydev->speed = SPEED_100; + phydev->duplex = DUPLEX_FULL; + + return 0; +} + +static int rtl9000a_config_aneg(struct phy_device *phydev) +{ + int ret; + u16 ctl = 0; + + switch (phydev->master_slave_set) { + case MASTER_SLAVE_CFG_MASTER_FORCE: + ctl |= CTL1000_AS_MASTER; + break; + case MASTER_SLAVE_CFG_SLAVE_FORCE: + break; + case MASTER_SLAVE_CFG_UNKNOWN: + case MASTER_SLAVE_CFG_UNSUPPORTED: + return 0; + default: + phydev_warn(phydev, "Unsupported Master/Slave mode\n"); + return -EOPNOTSUPP; + } + + ret = phy_modify_changed(phydev, MII_CTRL1000, CTL1000_AS_MASTER, ctl); + if (ret == 1) + ret = genphy_soft_reset(phydev); + + return ret; +} + +static int rtl9000a_read_status(struct phy_device *phydev) +{ + int ret; + + phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN; + phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN; + + ret = genphy_update_link(phydev); + if (ret) + return ret; + + ret = phy_read(phydev, MII_CTRL1000); + if (ret < 0) + return ret; + if (ret & CTL1000_AS_MASTER) + phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE; + else + phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE; + + ret = phy_read(phydev, MII_STAT1000); + if (ret < 0) + return ret; + if (ret & LPA_1000MSRES) + phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER; + else + phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE; + + return 0; +} + +static int rtl9000a_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, RTL8211F_INSR); + + return (err < 0) ? err : 0; +} + +static int rtl9000a_config_intr(struct phy_device *phydev) +{ + u16 val; + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = rtl9000a_ack_interrupt(phydev); + if (err) + return err; + + val = (u16)~RTL9000A_GINMR_LINK_STATUS; + err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val); + } else { + val = ~0; + err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val); + if (err) + return err; + + err = rtl9000a_ack_interrupt(phydev); + } + + return phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val); +} + +static irqreturn_t rtl9000a_handle_interrupt(struct phy_device *phydev) +{ + int irq_status; + + irq_status = phy_read(phydev, RTL8211F_INSR); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & RTL8211F_INER_LINK_STATUS)) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + static struct phy_driver realtek_drvs[] = { { PHY_ID_MATCH_EXACT(0x00008201), @@ -823,6 +942,19 @@ static struct phy_driver realtek_drvs[] = { .handle_interrupt = genphy_handle_interrupt_no_ack, .suspend = genphy_suspend, .resume = genphy_resume, + }, { + PHY_ID_MATCH_EXACT(0x001ccb00), + .name = "RTL9000AA_RTL9000AN Ethernet", + .features = PHY_BASIC_T1_FEATURES, + .config_init = rtl9000a_config_init, + .config_aneg = rtl9000a_config_aneg, + .read_status = rtl9000a_read_status, + .config_intr = rtl9000a_config_intr, + .handle_interrupt = rtl9000a_handle_interrupt, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, }, }; |