diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_82575.c')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_82575.c | 630 |
1 files changed, 406 insertions, 224 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index fdaaf2709d0a..84e7e0909def 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -33,6 +33,7 @@ #include <linux/types.h> #include <linux/if_ether.h> +#include <linux/i2c.h> #include "e1000_mac.h" #include "e1000_82575.h" @@ -110,184 +111,168 @@ static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw) return ext_mdio; } -static s32 igb_get_invariants_82575(struct e1000_hw *hw) +/** + * igb_init_phy_params_82575 - Init PHY func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 igb_init_phy_params_82575(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - struct e1000_nvm_info *nvm = &hw->nvm; - struct e1000_mac_info *mac = &hw->mac; - struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575; - u32 eecd; - s32 ret_val; - u16 size; - u32 ctrl_ext = 0; + s32 ret_val = 0; + u32 ctrl_ext; - switch (hw->device_id) { - case E1000_DEV_ID_82575EB_COPPER: - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82575GB_QUAD_COPPER: - mac->type = e1000_82575; - break; - case E1000_DEV_ID_82576: - case E1000_DEV_ID_82576_NS: - case E1000_DEV_ID_82576_NS_SERDES: - case E1000_DEV_ID_82576_FIBER: - case E1000_DEV_ID_82576_SERDES: - case E1000_DEV_ID_82576_QUAD_COPPER: - case E1000_DEV_ID_82576_QUAD_COPPER_ET2: - case E1000_DEV_ID_82576_SERDES_QUAD: - mac->type = e1000_82576; - break; - case E1000_DEV_ID_82580_COPPER: - case E1000_DEV_ID_82580_FIBER: - case E1000_DEV_ID_82580_QUAD_FIBER: - case E1000_DEV_ID_82580_SERDES: - case E1000_DEV_ID_82580_SGMII: - case E1000_DEV_ID_82580_COPPER_DUAL: - case E1000_DEV_ID_DH89XXCC_SGMII: - case E1000_DEV_ID_DH89XXCC_SERDES: - case E1000_DEV_ID_DH89XXCC_BACKPLANE: - case E1000_DEV_ID_DH89XXCC_SFP: - mac->type = e1000_82580; - break; - case E1000_DEV_ID_I350_COPPER: - case E1000_DEV_ID_I350_FIBER: - case E1000_DEV_ID_I350_SERDES: - case E1000_DEV_ID_I350_SGMII: - mac->type = e1000_i350; - break; - case E1000_DEV_ID_I210_COPPER: - case E1000_DEV_ID_I210_COPPER_OEM1: - case E1000_DEV_ID_I210_COPPER_IT: - case E1000_DEV_ID_I210_FIBER: - case E1000_DEV_ID_I210_SERDES: - case E1000_DEV_ID_I210_SGMII: - mac->type = e1000_i210; - break; - case E1000_DEV_ID_I211_COPPER: - mac->type = e1000_i211; - break; - default: - return -E1000_ERR_MAC_INIT; - break; + if (hw->phy.media_type != e1000_media_type_copper) { + phy->type = e1000_phy_none; + goto out; } - /* Set media type */ - /* - * The 82575 uses bits 22:23 for link mode. The mode can be changed - * based on the EEPROM. We cannot rely upon device ID. There - * is no distinguishable difference between fiber and internal - * SerDes mode on the 82575. There can be an external PHY attached - * on the SGMII interface. For this, we'll set sgmii_active to true. - */ - phy->media_type = e1000_media_type_copper; - dev_spec->sgmii_active = false; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; ctrl_ext = rd32(E1000_CTRL_EXT); - switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) { - case E1000_CTRL_EXT_LINK_MODE_SGMII: - dev_spec->sgmii_active = true; - break; - case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: - case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: - hw->phy.media_type = e1000_media_type_internal_serdes; - break; - default: - break; + + if (igb_sgmii_active_82575(hw)) { + phy->ops.reset = igb_phy_hw_reset_sgmii_82575; + ctrl_ext |= E1000_CTRL_I2C_ENA; + } else { + phy->ops.reset = igb_phy_hw_reset; + ctrl_ext &= ~E1000_CTRL_I2C_ENA; } - /* Set mta register count */ - mac->mta_reg_count = 128; - /* Set rar entry count */ - switch (mac->type) { - case e1000_82576: - mac->rar_entry_count = E1000_RAR_ENTRIES_82576; + wr32(E1000_CTRL_EXT, ctrl_ext); + igb_reset_mdicnfg_82580(hw); + + if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) { + phy->ops.read_reg = igb_read_phy_reg_sgmii_82575; + phy->ops.write_reg = igb_write_phy_reg_sgmii_82575; + } else { + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + phy->ops.read_reg = igb_read_phy_reg_82580; + phy->ops.write_reg = igb_write_phy_reg_82580; + break; + case e1000_i210: + case e1000_i211: + phy->ops.read_reg = igb_read_phy_reg_gs40g; + phy->ops.write_reg = igb_write_phy_reg_gs40g; + break; + default: + phy->ops.read_reg = igb_read_phy_reg_igp; + phy->ops.write_reg = igb_write_phy_reg_igp; + } + } + + /* set lan id */ + hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >> + E1000_STATUS_FUNC_SHIFT; + + /* Set phy->phy_addr and phy->id. */ + ret_val = igb_get_phy_id_82575(hw); + if (ret_val) + return ret_val; + + /* Verify phy id and set remaining function pointers */ + switch (phy->id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1111_I_PHY_ID: + phy->type = e1000_phy_m88; + phy->ops.get_phy_info = igb_get_phy_info_m88; + if (phy->id == I347AT4_E_PHY_ID || + phy->id == M88E1112_E_PHY_ID) + phy->ops.get_cable_length = + igb_get_cable_length_m88_gen2; + else + phy->ops.get_cable_length = igb_get_cable_length_m88; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; break; - case e1000_82580: - mac->rar_entry_count = E1000_RAR_ENTRIES_82580; + case IGP03E1000_E_PHY_ID: + phy->type = e1000_phy_igp_3; + phy->ops.get_phy_info = igb_get_phy_info_igp; + phy->ops.get_cable_length = igb_get_cable_length_igp_2; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state; break; - case e1000_i350: - mac->rar_entry_count = E1000_RAR_ENTRIES_I350; + case I82580_I_PHY_ID: + case I350_I_PHY_ID: + phy->type = e1000_phy_82580; + phy->ops.force_speed_duplex = + igb_phy_force_speed_duplex_82580; + phy->ops.get_cable_length = igb_get_cable_length_82580; + phy->ops.get_phy_info = igb_get_phy_info_82580; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; break; - default: - mac->rar_entry_count = E1000_RAR_ENTRIES_82575; + case I210_I_PHY_ID: + phy->type = e1000_phy_i210; + phy->ops.check_polarity = igb_check_polarity_m88; + phy->ops.get_phy_info = igb_get_phy_info_m88; + phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; break; + default: + ret_val = -E1000_ERR_PHY; + goto out; } - /* reset */ - if (mac->type >= e1000_82580) - mac->ops.reset_hw = igb_reset_hw_82580; - else - mac->ops.reset_hw = igb_reset_hw_82575; - if (mac->type >= e1000_i210) { - mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210; - mac->ops.release_swfw_sync = igb_release_swfw_sync_i210; - } else { - mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575; - mac->ops.release_swfw_sync = igb_release_swfw_sync_82575; - } +out: + return ret_val; +} - /* Set if part includes ASF firmware */ - mac->asf_firmware_present = true; - /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = - (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK) - ? true : false; - /* enable EEE on i350 parts and later parts */ - if (mac->type >= e1000_i350) - dev_spec->eee_disable = false; - else - dev_spec->eee_disable = true; - /* physical interface link setup */ - mac->ops.setup_physical_interface = - (hw->phy.media_type == e1000_media_type_copper) - ? igb_setup_copper_link_82575 - : igb_setup_serdes_link_82575; +/** + * igb_init_nvm_params_82575 - Init NVM func ptrs. + * @hw: pointer to the HW structure + **/ +s32 igb_init_nvm_params_82575(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = rd32(E1000_EECD); + u16 size; - /* NVM initialization */ - eecd = rd32(E1000_EECD); size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> E1000_EECD_SIZE_EX_SHIFT); - - /* - * Added to a constant, "size" becomes the left-shift value + /* Added to a constant, "size" becomes the left-shift value * for setting word_size. */ size += NVM_WORD_SIZE_BASE_SHIFT; - /* - * Check for invalid size + /* Just in case size is out of range, cap it to the largest + * EEPROM size supported */ - if ((hw->mac.type == e1000_82576) && (size > 15)) { - pr_notice("The NVM size is not valid, defaulting to 32K\n"); + if (size > 15) size = 15; - } nvm->word_size = 1 << size; if (hw->mac.type < e1000_i210) { - nvm->opcode_bits = 8; - nvm->delay_usec = 1; + nvm->opcode_bits = 8; + nvm->delay_usec = 1; + switch (nvm->override) { case e1000_nvm_override_spi_large: - nvm->page_size = 32; + nvm->page_size = 32; nvm->address_bits = 16; break; case e1000_nvm_override_spi_small: - nvm->page_size = 8; + nvm->page_size = 8; nvm->address_bits = 8; break; default: - nvm->page_size = eecd - & E1000_EECD_ADDR_BITS ? 32 : 8; - nvm->address_bits = eecd - & E1000_EECD_ADDR_BITS ? 16 : 8; + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? + 16 : 8; break; } if (nvm->word_size == (1 << 15)) nvm->page_size = 128; nvm->type = e1000_nvm_eeprom_spi; - } else + } else { nvm->type = e1000_nvm_flash_hw; + } /* NVM Function Pointers */ switch (hw->mac.type) { @@ -344,118 +329,176 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) break; } - /* if part supports SR-IOV then initialize mailbox parameters */ + return 0; +} + +/** + * igb_init_mac_params_82575 - Init MAC func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 igb_init_mac_params_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + + /* Set mta register count */ + mac->mta_reg_count = 128; + /* Set rar entry count */ switch (mac->type) { case e1000_82576: + mac->rar_entry_count = E1000_RAR_ENTRIES_82576; + break; + case e1000_82580: + mac->rar_entry_count = E1000_RAR_ENTRIES_82580; + break; case e1000_i350: - igb_init_mbx_params_pf(hw); + mac->rar_entry_count = E1000_RAR_ENTRIES_I350; break; default: + mac->rar_entry_count = E1000_RAR_ENTRIES_82575; break; } + /* reset */ + if (mac->type >= e1000_82580) + mac->ops.reset_hw = igb_reset_hw_82580; + else + mac->ops.reset_hw = igb_reset_hw_82575; - /* setup PHY parameters */ - if (phy->media_type != e1000_media_type_copper) { - phy->type = e1000_phy_none; - return 0; - } - - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 100; - - ctrl_ext = rd32(E1000_CTRL_EXT); + if (mac->type >= e1000_i210) { + mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210; + mac->ops.release_swfw_sync = igb_release_swfw_sync_i210; - /* PHY function pointers */ - if (igb_sgmii_active_82575(hw)) { - phy->ops.reset = igb_phy_hw_reset_sgmii_82575; - ctrl_ext |= E1000_CTRL_I2C_ENA; } else { - phy->ops.reset = igb_phy_hw_reset; - ctrl_ext &= ~E1000_CTRL_I2C_ENA; + mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575; + mac->ops.release_swfw_sync = igb_release_swfw_sync_82575; } - wr32(E1000_CTRL_EXT, ctrl_ext); - igb_reset_mdicnfg_82580(hw); - - if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) { - phy->ops.read_reg = igb_read_phy_reg_sgmii_82575; - phy->ops.write_reg = igb_write_phy_reg_sgmii_82575; - } else if ((hw->mac.type == e1000_82580) - || (hw->mac.type == e1000_i350)) { - phy->ops.read_reg = igb_read_phy_reg_82580; - phy->ops.write_reg = igb_write_phy_reg_82580; - } else if (hw->phy.type >= e1000_phy_i210) { - phy->ops.read_reg = igb_read_phy_reg_gs40g; - phy->ops.write_reg = igb_write_phy_reg_gs40g; - } else { - phy->ops.read_reg = igb_read_phy_reg_igp; - phy->ops.write_reg = igb_write_phy_reg_igp; - } + /* Set if part includes ASF firmware */ + mac->asf_firmware_present = true; + /* Set if manageability features are enabled. */ + mac->arc_subsystem_valid = + (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK) + ? true : false; + /* enable EEE on i350 parts and later parts */ + if (mac->type >= e1000_i350) + dev_spec->eee_disable = false; + else + dev_spec->eee_disable = true; + /* physical interface link setup */ + mac->ops.setup_physical_interface = + (hw->phy.media_type == e1000_media_type_copper) + ? igb_setup_copper_link_82575 + : igb_setup_serdes_link_82575; - /* set lan id */ - hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >> - E1000_STATUS_FUNC_SHIFT; + return 0; +} - /* Set phy->phy_addr and phy->id. */ - ret_val = igb_get_phy_id_82575(hw); - if (ret_val) - return ret_val; +static s32 igb_get_invariants_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575; + s32 ret_val; + u32 ctrl_ext = 0; - /* Verify phy id and set remaining function pointers */ - switch (phy->id) { - case I347AT4_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1111_I_PHY_ID: - phy->type = e1000_phy_m88; - phy->ops.get_phy_info = igb_get_phy_info_m88; + switch (hw->device_id) { + case E1000_DEV_ID_82575EB_COPPER: + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82575GB_QUAD_COPPER: + mac->type = e1000_82575; + break; + case E1000_DEV_ID_82576: + case E1000_DEV_ID_82576_NS: + case E1000_DEV_ID_82576_NS_SERDES: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + case E1000_DEV_ID_82576_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER_ET2: + case E1000_DEV_ID_82576_SERDES_QUAD: + mac->type = e1000_82576; + break; + case E1000_DEV_ID_82580_COPPER: + case E1000_DEV_ID_82580_FIBER: + case E1000_DEV_ID_82580_QUAD_FIBER: + case E1000_DEV_ID_82580_SERDES: + case E1000_DEV_ID_82580_SGMII: + case E1000_DEV_ID_82580_COPPER_DUAL: + case E1000_DEV_ID_DH89XXCC_SGMII: + case E1000_DEV_ID_DH89XXCC_SERDES: + case E1000_DEV_ID_DH89XXCC_BACKPLANE: + case E1000_DEV_ID_DH89XXCC_SFP: + mac->type = e1000_82580; + break; + case E1000_DEV_ID_I350_COPPER: + case E1000_DEV_ID_I350_FIBER: + case E1000_DEV_ID_I350_SERDES: + case E1000_DEV_ID_I350_SGMII: + mac->type = e1000_i350; + break; + case E1000_DEV_ID_I210_COPPER: + case E1000_DEV_ID_I210_COPPER_OEM1: + case E1000_DEV_ID_I210_COPPER_IT: + case E1000_DEV_ID_I210_FIBER: + case E1000_DEV_ID_I210_SERDES: + case E1000_DEV_ID_I210_SGMII: + mac->type = e1000_i210; + break; + case E1000_DEV_ID_I211_COPPER: + mac->type = e1000_i211; + break; + default: + return -E1000_ERR_MAC_INIT; + break; + } - if (phy->id == I347AT4_E_PHY_ID || - phy->id == M88E1112_E_PHY_ID) - phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; - else - phy->ops.get_cable_length = igb_get_cable_length_m88; + /* Set media type */ + /* + * The 82575 uses bits 22:23 for link mode. The mode can be changed + * based on the EEPROM. We cannot rely upon device ID. There + * is no distinguishable difference between fiber and internal + * SerDes mode on the 82575. There can be an external PHY attached + * on the SGMII interface. For this, we'll set sgmii_active to true. + */ + hw->phy.media_type = e1000_media_type_copper; + dev_spec->sgmii_active = false; - if (phy->id == I210_I_PHY_ID) { - phy->ops.get_cable_length = - igb_get_cable_length_m88_gen2; - phy->ops.set_d0_lplu_state = - igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = - igb_set_d3_lplu_state_82580; - } - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; + ctrl_ext = rd32(E1000_CTRL_EXT); + switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) { + case E1000_CTRL_EXT_LINK_MODE_SGMII: + dev_spec->sgmii_active = true; break; - case IGP03E1000_E_PHY_ID: - phy->type = e1000_phy_igp_3; - phy->ops.get_phy_info = igb_get_phy_info_igp; - phy->ops.get_cable_length = igb_get_cable_length_igp_2; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state; + case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: + case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: + hw->phy.media_type = e1000_media_type_internal_serdes; break; - case I82580_I_PHY_ID: - case I350_I_PHY_ID: - phy->type = e1000_phy_82580; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580; - phy->ops.get_cable_length = igb_get_cable_length_82580; - phy->ops.get_phy_info = igb_get_phy_info_82580; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; + default: break; - case I210_I_PHY_ID: - phy->type = e1000_phy_i210; - phy->ops.get_phy_info = igb_get_phy_info_m88; - phy->ops.check_polarity = igb_check_polarity_m88; - phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; + } + + /* mac initialization and operations */ + ret_val = igb_init_mac_params_82575(hw); + if (ret_val) + goto out; + + /* NVM initialization */ + ret_val = igb_init_nvm_params_82575(hw); + if (ret_val) + goto out; + + /* if part supports SR-IOV then initialize mailbox parameters */ + switch (mac->type) { + case e1000_82576: + case e1000_i350: + igb_init_mbx_params_pf(hw); break; default: - return -E1000_ERR_PHY; + break; } - return 0; + /* setup PHY parameters */ + ret_val = igb_init_phy_params_82575(hw); + +out: + return ret_val; } /** @@ -2302,18 +2345,157 @@ out: return ret_val; } +static const u8 e1000_emc_temp_data[4] = { + E1000_EMC_INTERNAL_DATA, + E1000_EMC_DIODE1_DATA, + E1000_EMC_DIODE2_DATA, + E1000_EMC_DIODE3_DATA +}; +static const u8 e1000_emc_therm_limit[4] = { + E1000_EMC_INTERNAL_THERM_LIMIT, + E1000_EMC_DIODE1_THERM_LIMIT, + E1000_EMC_DIODE2_THERM_LIMIT, + E1000_EMC_DIODE3_THERM_LIMIT +}; + +/* igb_get_thermal_sensor_data_generic - Gathers thermal sensor data + * @hw: pointer to hardware structure + * + * Updates the temperatures in mac.thermal_sensor_data + */ +s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + data->sensor[0].temp = (rd32(E1000_THMJT) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + if (num_sensors > E1000_MAX_SENSORS) + num_sensors = E1000_MAX_SENSORS; + + for (i = 1; i < num_sensors; i++) { + hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + + if (sensor_location != 0) + hw->phy.ops.read_i2c_byte(hw, + e1000_emc_temp_data[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + &data->sensor[i].temp); + } + return status; +} + +/* igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Sets the thermal sensor thresholds according to the NVM map + * and save off the threshold and location values into mac.thermal_sensor_data + */ +s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 low_thresh_delta; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 therm_limit; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + memset(data, 0, sizeof(struct e1000_thermal_sensor_data)); + + data->sensor[0].location = 0x1; + data->sensor[0].caution_thresh = + (rd32(E1000_THHIGHTC) & 0xFF); + data->sensor[0].max_op_thresh = + (rd32(E1000_THLOWTC) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >> + NVM_ETS_LTHRES_DELTA_SHIFT); + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + + for (i = 1; i <= num_sensors; i++) { + hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK; + + hw->phy.ops.write_i2c_byte(hw, + e1000_emc_therm_limit[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + therm_limit); + + if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) { + data->sensor[i].location = sensor_location; + data->sensor[i].caution_thresh = therm_limit; + data->sensor[i].max_op_thresh = therm_limit - + low_thresh_delta; + } + } + return status; +} + static struct e1000_mac_operations e1000_mac_ops_82575 = { .init_hw = igb_init_hw_82575, .check_for_link = igb_check_for_link_82575, .rar_set = igb_rar_set, .read_mac_addr = igb_read_mac_addr_82575, .get_speed_and_duplex = igb_get_speed_and_duplex_copper, +#ifdef CONFIG_IGB_HWMON + .get_thermal_sensor_data = igb_get_thermal_sensor_data_generic, + .init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic, +#endif }; static struct e1000_phy_operations e1000_phy_ops_82575 = { .acquire = igb_acquire_phy_82575, .get_cfg_done = igb_get_cfg_done_82575, .release = igb_release_phy_82575, + .write_i2c_byte = igb_write_i2c_byte, + .read_i2c_byte = igb_read_i2c_byte, }; static struct e1000_nvm_operations e1000_nvm_ops_82575 = { |