summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e/netdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c243
1 files changed, 211 insertions, 32 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index c509a5c900f5..89d788d8f263 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1,5 +1,5 @@
/* Intel PRO/1000 Linux driver
- * Copyright(c) 1999 - 2014 Intel Corporation.
+ * Copyright(c) 1999 - 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -48,7 +48,7 @@
#define DRV_EXTRAVERSION "-k"
-#define DRV_VERSION "2.3.2" DRV_EXTRAVERSION
+#define DRV_VERSION "3.2.5" DRV_EXTRAVERSION
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
@@ -3525,22 +3525,30 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
switch (hw->mac.type) {
case e1000_pch2lan:
case e1000_pch_lpt:
- case e1000_pch_spt:
- /* On I217, I218 and I219, the clock frequency is 25MHz
- * or 96MHz as indicated by the System Clock Frequency
- * Indication
- */
- if (((hw->mac.type != e1000_pch_lpt) &&
- (hw->mac.type != e1000_pch_spt)) ||
- (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
+ if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
/* Stable 96MHz frequency */
incperiod = INCPERIOD_96MHz;
incvalue = INCVALUE_96MHz;
shift = INCVALUE_SHIFT_96MHz;
adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz;
+ } else {
+ /* Stable 25MHz frequency */
+ incperiod = INCPERIOD_25MHz;
+ incvalue = INCVALUE_25MHz;
+ shift = INCVALUE_SHIFT_25MHz;
+ adapter->cc.shift = shift;
+ }
+ break;
+ case e1000_pch_spt:
+ if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
+ /* Stable 24MHz frequency */
+ incperiod = INCPERIOD_24MHz;
+ incvalue = INCVALUE_24MHz;
+ shift = INCVALUE_SHIFT_24MHz;
+ adapter->cc.shift = shift;
break;
}
- /* fall-through */
+ return -EINVAL;
case e1000_82574:
case e1000_82583:
/* Stable 25MHz frequency */
@@ -3788,6 +3796,108 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
}
/**
+ * e1000_flush_tx_ring - remove all descriptors from the tx_ring
+ *
+ * We want to clear all pending descriptors from the TX ring.
+ * zeroing happens when the HW reads the regs. We assign the ring itself as
+ * the data of the next descriptor. We don't care about the data we are about
+ * to reset the HW.
+ */
+static void e1000_flush_tx_ring(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_tx_desc *tx_desc = NULL;
+ u32 tdt, tctl, txd_lower = E1000_TXD_CMD_IFCS;
+ u16 size = 512;
+
+ tctl = er32(TCTL);
+ ew32(TCTL, tctl | E1000_TCTL_EN);
+ tdt = er32(TDT(0));
+ BUG_ON(tdt != tx_ring->next_to_use);
+ tx_desc = E1000_TX_DESC(*tx_ring, tx_ring->next_to_use);
+ tx_desc->buffer_addr = tx_ring->dma;
+
+ tx_desc->lower.data = cpu_to_le32(txd_lower | size);
+ tx_desc->upper.data = 0;
+ /* flush descriptors to memory before notifying the HW */
+ wmb();
+ tx_ring->next_to_use++;
+ if (tx_ring->next_to_use == tx_ring->count)
+ tx_ring->next_to_use = 0;
+ ew32(TDT(0), tx_ring->next_to_use);
+ mmiowb();
+ usleep_range(200, 250);
+}
+
+/**
+ * e1000_flush_rx_ring - remove all descriptors from the rx_ring
+ *
+ * Mark all descriptors in the RX ring as consumed and disable the rx ring
+ */
+static void e1000_flush_rx_ring(struct e1000_adapter *adapter)
+{
+ u32 rctl, rxdctl;
+ struct e1000_hw *hw = &adapter->hw;
+
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ e1e_flush();
+ usleep_range(100, 150);
+
+ rxdctl = er32(RXDCTL(0));
+ /* zero the lower 14 bits (prefetch and host thresholds) */
+ rxdctl &= 0xffffc000;
+
+ /* update thresholds: prefetch threshold to 31, host threshold to 1
+ * and make sure the granularity is "descriptors" and not "cache lines"
+ */
+ rxdctl |= (0x1F | (1 << 8) | E1000_RXDCTL_THRESH_UNIT_DESC);
+
+ ew32(RXDCTL(0), rxdctl);
+ /* momentarily enable the RX ring for the changes to take effect */
+ ew32(RCTL, rctl | E1000_RCTL_EN);
+ e1e_flush();
+ usleep_range(100, 150);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+}
+
+/**
+ * e1000_flush_desc_rings - remove all descriptors from the descriptor rings
+ *
+ * In i219, the descriptor rings must be emptied before resetting the HW
+ * or before changing the device state to D3 during runtime (runtime PM).
+ *
+ * Failure to do this will cause the HW to enter a unit hang state which can
+ * only be released by PCI reset on the device
+ *
+ */
+
+static void e1000_flush_desc_rings(struct e1000_adapter *adapter)
+{
+ u16 hang_state;
+ u32 fext_nvm11, tdlen;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* First, disable MULR fix in FEXTNVM11 */
+ fext_nvm11 = er32(FEXTNVM11);
+ fext_nvm11 |= E1000_FEXTNVM11_DISABLE_MULR_FIX;
+ ew32(FEXTNVM11, fext_nvm11);
+ /* do nothing if we're not in faulty state, or if the queue is empty */
+ tdlen = er32(TDLEN(0));
+ pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS,
+ &hang_state);
+ if (!(hang_state & FLUSH_DESC_REQUIRED) || !tdlen)
+ return;
+ e1000_flush_tx_ring(adapter);
+ /* recheck, maybe the fault is caused by the rx ring */
+ pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS,
+ &hang_state);
+ if (hang_state & FLUSH_DESC_REQUIRED)
+ e1000_flush_rx_ring(adapter);
+}
+
+/**
* e1000e_reset - bring the hardware into a known good state
*
* This function boots the hardware and enables some settings that
@@ -3807,7 +3917,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
/* reset Packet Buffer Allocation to default */
ew32(PBA, pba);
- if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ if (adapter->max_frame_size > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) {
/* To maintain wire speed transmits, the Tx FIFO should be
* large enough to accommodate two full transmit packets,
* rounded up to the next 1KB and expressed in KB. Likewise,
@@ -3943,6 +4053,8 @@ void e1000e_reset(struct e1000_adapter *adapter)
}
}
+ if (hw->mac.type == e1000_pch_spt)
+ e1000_flush_desc_rings(adapter);
/* Allow time for pending master requests to run */
mac->ops.reset_hw(hw);
@@ -4016,6 +4128,20 @@ void e1000e_reset(struct e1000_adapter *adapter)
phy_data &= ~IGP02E1000_PM_SPD;
e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
}
+ if (hw->mac.type == e1000_pch_spt && adapter->int_mode == 0) {
+ u32 reg;
+
+ /* Fextnvm7 @ 0xe4[2] = 1 */
+ reg = er32(FEXTNVM7);
+ reg |= E1000_FEXTNVM7_SIDE_CLK_UNGATE;
+ ew32(FEXTNVM7, reg);
+ /* Fextnvm9 @ 0x5bb4[13:12] = 11 */
+ reg = er32(FEXTNVM9);
+ reg |= E1000_FEXTNVM9_IOSFSB_CLKGATE_DIS |
+ E1000_FEXTNVM9_IOSFSB_CLKREQ_DIS;
+ ew32(FEXTNVM9, reg);
+ }
+
}
int e1000e_up(struct e1000_adapter *adapter)
@@ -4115,8 +4241,6 @@ void e1000e_down(struct e1000_adapter *adapter, bool reset)
spin_unlock(&adapter->stats64_lock);
e1000e_flush_descriptors(adapter);
- e1000_clean_tx_ring(adapter->tx_ring);
- e1000_clean_rx_ring(adapter->rx_ring);
adapter->link_speed = 0;
adapter->link_duplex = 0;
@@ -4127,8 +4251,14 @@ void e1000e_down(struct e1000_adapter *adapter, bool reset)
e1000_lv_jumbo_workaround_ich8lan(hw, false))
e_dbg("failed to disable jumbo frame workaround mode\n");
- if (reset && !pci_channel_offline(adapter->pdev))
- e1000e_reset(adapter);
+ if (!pci_channel_offline(adapter->pdev)) {
+ if (reset)
+ e1000e_reset(adapter);
+ else if (hw->mac.type == e1000_pch_spt)
+ e1000_flush_desc_rings(adapter);
+ }
+ e1000_clean_tx_ring(adapter->tx_ring);
+ e1000_clean_rx_ring(adapter->rx_ring);
}
void e1000e_reinit_locked(struct e1000_adapter *adapter)
@@ -4151,9 +4281,16 @@ static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc)
cc);
struct e1000_hw *hw = &adapter->hw;
cycle_t systim, systim_next;
+ /* SYSTIMH latching upon SYSTIML read does not work well. To fix that
+ * we don't want to allow overflow of SYSTIML and a change to SYSTIMH
+ * to occur between reads, so if we read a vale close to overflow, we
+ * wait for overflow to occur and read both registers when its safe.
+ */
+ u32 systim_overflow_latch_fix = 0x3FFFFFFF;
- /* latch SYSTIMH on read of SYSTIML */
- systim = (cycle_t)er32(SYSTIML);
+ do {
+ systim = (cycle_t)er32(SYSTIML);
+ } while (systim > systim_overflow_latch_fix);
systim |= (cycle_t)er32(SYSTIMH) << 32;
if ((hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82583)) {
@@ -4196,9 +4333,9 @@ static int e1000_sw_init(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
+ adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
adapter->rx_ps_bsize0 = 128;
- adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ adapter->max_frame_size = netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
adapter->tx_ring_count = E1000_DEFAULT_TXD;
adapter->rx_ring_count = E1000_DEFAULT_RXD;
@@ -5781,17 +5918,17 @@ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- int max_frame = new_mtu + VLAN_HLEN + ETH_HLEN + ETH_FCS_LEN;
+ int max_frame = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
/* Jumbo frame support */
- if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ if ((max_frame > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) &&
!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
e_err("Jumbo Frames not supported.\n");
return -EINVAL;
}
/* Supported frame sizes */
- if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
+ if ((new_mtu < (VLAN_ETH_ZLEN + ETH_FCS_LEN)) ||
(max_frame > adapter->max_hw_frame_size)) {
e_err("Unsupported MTU setting\n");
return -EINVAL;
@@ -5831,10 +5968,8 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
adapter->rx_buffer_len = 4096;
/* adjust allocation if LPE protects us, and we aren't using SBP */
- if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
- (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
- adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
- + ETH_FCS_LEN;
+ if (max_frame <= (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN))
+ adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
if (netif_running(netdev))
e1000e_up(adapter);
@@ -6219,13 +6354,14 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
}
/**
- * e1000e_disable_aspm - Disable ASPM states
+ * __e1000e_disable_aspm - Disable ASPM states
* @pdev: pointer to PCI device struct
* @state: bit-mask of ASPM states to disable
+ * @locked: indication if this context holds pci_bus_sem locked.
*
* Some devices *must* have certain ASPM states disabled per hardware errata.
**/
-static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state, int locked)
{
struct pci_dev *parent = pdev->bus->self;
u16 aspm_dis_mask = 0;
@@ -6264,7 +6400,10 @@ static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
"L1" : "");
#ifdef CONFIG_PCIEASPM
- pci_disable_link_state_locked(pdev, state);
+ if (locked)
+ pci_disable_link_state_locked(pdev, state);
+ else
+ pci_disable_link_state(pdev, state);
/* Double-check ASPM control. If not disabled by the above, the
* BIOS is preventing that from happening (or CONFIG_PCIEASPM is
@@ -6287,6 +6426,32 @@ static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
aspm_dis_mask);
}
+/**
+ * e1000e_disable_aspm - Disable ASPM states.
+ * @pdev: pointer to PCI device struct
+ * @state: bit-mask of ASPM states to disable
+ *
+ * This function acquires the pci_bus_sem!
+ * Some devices *must* have certain ASPM states disabled per hardware errata.
+ **/
+static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+{
+ __e1000e_disable_aspm(pdev, state, 0);
+}
+
+/**
+ * e1000e_disable_aspm_locked Disable ASPM states.
+ * @pdev: pointer to PCI device struct
+ * @state: bit-mask of ASPM states to disable
+ *
+ * This function must be called with pci_bus_sem acquired!
+ * Some devices *must* have certain ASPM states disabled per hardware errata.
+ **/
+static void e1000e_disable_aspm_locked(struct pci_dev *pdev, u16 state)
+{
+ __e1000e_disable_aspm(pdev, state, 1);
+}
+
#ifdef CONFIG_PM
static int __e1000_resume(struct pci_dev *pdev)
{
@@ -6300,7 +6465,7 @@ static int __e1000_resume(struct pci_dev *pdev)
if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
aspm_disable_flag |= PCIE_LINK_STATE_L1;
if (aspm_disable_flag)
- e1000e_disable_aspm(pdev, aspm_disable_flag);
+ e1000e_disable_aspm_locked(pdev, aspm_disable_flag);
pci_set_master(pdev);
@@ -6678,6 +6843,19 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter)
}
}
+static netdev_features_t e1000_fix_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
+ if ((hw->mac.type >= e1000_pch2lan) && (netdev->mtu > ETH_DATA_LEN))
+ features &= ~NETIF_F_RXFCS;
+
+ return features;
+}
+
static int e1000_set_features(struct net_device *netdev,
netdev_features_t features)
{
@@ -6734,6 +6912,7 @@ static const struct net_device_ops e1000e_netdev_ops = {
.ndo_poll_controller = e1000_netpoll,
#endif
.ndo_set_features = e1000_set_features,
+ .ndo_fix_features = e1000_fix_features,
};
/**
@@ -7289,7 +7468,7 @@ static int __init e1000_init_module(void)
pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
e1000e_driver_version);
- pr_info("Copyright(c) 1999 - 2014 Intel Corporation.\n");
+ pr_info("Copyright(c) 1999 - 2015 Intel Corporation.\n");
ret = pci_register_driver(&e1000_driver);
return ret;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 10:21:45 +0000