diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio')
| -rw-r--r-- | drivers/net/ethernet/chelsio/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 375 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 82 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h | 24 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/adapter.h | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 286 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c | 58 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/libcxgb/Makefile | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c (renamed from drivers/net/ethernet/chelsio/cxgb4/cxgb4_ppm.c) | 46 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.h (renamed from drivers/net/ethernet/chelsio/cxgb4/cxgb4_ppm.h) | 38 |
15 files changed, 667 insertions, 275 deletions
diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig index 4686a85a8a22..5713e83be08c 100644 --- a/drivers/net/ethernet/chelsio/Kconfig +++ b/drivers/net/ethernet/chelsio/Kconfig @@ -96,17 +96,6 @@ config CHELSIO_T4_DCB If unsure, say N. -config CHELSIO_T4_UWIRE - bool "Unified Wire Support for Chelsio T5 cards" - default n - depends on CHELSIO_T4 - ---help--- - Enable unified-wire offload features. - Say Y here if you want to enable unified-wire over Ethernet - in the driver. - - If unsure, say N. - config CHELSIO_T4_FCOE bool "Fibre Channel over Ethernet (FCoE) Support for Chelsio T5 cards" default n @@ -137,4 +126,9 @@ config CHELSIO_T4VF To compile this driver as a module choose M here; the module will be called cxgb4vf. +config CHELSIO_LIB + tristate + ---help--- + Common library for Chelsio drivers. + endif # NET_VENDOR_CHELSIO diff --git a/drivers/net/ethernet/chelsio/Makefile b/drivers/net/ethernet/chelsio/Makefile index 390510b5e90f..b6a5eec6ed8e 100644 --- a/drivers/net/ethernet/chelsio/Makefile +++ b/drivers/net/ethernet/chelsio/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_CHELSIO_T1) += cxgb/ obj-$(CONFIG_CHELSIO_T3) += cxgb3/ obj-$(CONFIG_CHELSIO_T4) += cxgb4/ obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf/ +obj-$(CONFIG_CHELSIO_LIB) += libcxgb/ diff --git a/drivers/net/ethernet/chelsio/cxgb4/Makefile b/drivers/net/ethernet/chelsio/cxgb4/Makefile index 85c92821b239..ace0ab98d0f1 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/Makefile +++ b/drivers/net/ethernet/chelsio/cxgb4/Makefile @@ -7,5 +7,4 @@ obj-$(CONFIG_CHELSIO_T4) += cxgb4.o cxgb4-objs := cxgb4_main.o l2t.o t4_hw.o sge.o clip_tbl.o cxgb4_ethtool.o cxgb4-$(CONFIG_CHELSIO_T4_DCB) += cxgb4_dcb.o cxgb4-$(CONFIG_CHELSIO_T4_FCOE) += cxgb4_fcoe.o -cxgb4-$(CONFIG_CHELSIO_T4_UWIRE) += cxgb4_ppm.o cxgb4-$(CONFIG_DEBUG_FS) += cxgb4_debugfs.o diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index b4fceb92479f..2e2aa9fec9bb 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -418,6 +418,7 @@ struct trace_params { struct link_config { unsigned short supported; /* link capabilities */ unsigned short advertising; /* advertised capabilities */ + unsigned short lp_advertising; /* peer advertised capabilities */ unsigned short requested_speed; /* speed user has requested */ unsigned short speed; /* actual link speed */ unsigned char requested_fc; /* flow control user has requested */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c index 7a0b92b2f73c..02f80febeb91 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c @@ -480,178 +480,293 @@ static int identify_port(struct net_device *dev, return t4_identify_port(adap, adap->pf, netdev2pinfo(dev)->viid, val); } -static unsigned int from_fw_linkcaps(enum fw_port_type type, unsigned int caps) +/** + * from_fw_port_mod_type - translate Firmware Port/Module type to Ethtool + * @port_type: Firmware Port Type + * @mod_type: Firmware Module Type + * + * Translate Firmware Port/Module type to Ethtool Port Type. + */ +static int from_fw_port_mod_type(enum fw_port_type port_type, + enum fw_port_module_type mod_type) { - unsigned int v = 0; - - if (type == FW_PORT_TYPE_BT_SGMII || type == FW_PORT_TYPE_BT_XFI || - type == FW_PORT_TYPE_BT_XAUI) { - v |= SUPPORTED_TP; - if (caps & FW_PORT_CAP_SPEED_100M) - v |= SUPPORTED_100baseT_Full; - if (caps & FW_PORT_CAP_SPEED_1G) - v |= SUPPORTED_1000baseT_Full; - if (caps & FW_PORT_CAP_SPEED_10G) - v |= SUPPORTED_10000baseT_Full; - } else if (type == FW_PORT_TYPE_KX4 || type == FW_PORT_TYPE_KX) { - v |= SUPPORTED_Backplane; - if (caps & FW_PORT_CAP_SPEED_1G) - v |= SUPPORTED_1000baseKX_Full; - if (caps & FW_PORT_CAP_SPEED_10G) - v |= SUPPORTED_10000baseKX4_Full; - } else if (type == FW_PORT_TYPE_KR) { - v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full; - } else if (type == FW_PORT_TYPE_BP_AP) { - v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | - SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full; - } else if (type == FW_PORT_TYPE_BP4_AP) { - v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | - SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full | - SUPPORTED_10000baseKX4_Full; - } else if (type == FW_PORT_TYPE_FIBER_XFI || - type == FW_PORT_TYPE_FIBER_XAUI || - type == FW_PORT_TYPE_SFP || - type == FW_PORT_TYPE_QSFP_10G || - type == FW_PORT_TYPE_QSA) { - v |= SUPPORTED_FIBRE; - if (caps & FW_PORT_CAP_SPEED_1G) - v |= SUPPORTED_1000baseT_Full; - if (caps & FW_PORT_CAP_SPEED_10G) - v |= SUPPORTED_10000baseT_Full; - } else if (type == FW_PORT_TYPE_BP40_BA || - type == FW_PORT_TYPE_QSFP) { - v |= SUPPORTED_40000baseSR4_Full; - v |= SUPPORTED_FIBRE; + if (port_type == FW_PORT_TYPE_BT_SGMII || + port_type == FW_PORT_TYPE_BT_XFI || + port_type == FW_PORT_TYPE_BT_XAUI) { + return PORT_TP; + } else if (port_type == FW_PORT_TYPE_FIBER_XFI || + port_type == FW_PORT_TYPE_FIBER_XAUI) { + return PORT_FIBRE; + } else if (port_type == FW_PORT_TYPE_SFP || + port_type == FW_PORT_TYPE_QSFP_10G || + port_type == FW_PORT_TYPE_QSA || + port_type == FW_PORT_TYPE_QSFP) { + if (mod_type == FW_PORT_MOD_TYPE_LR || + mod_type == FW_PORT_MOD_TYPE_SR || + mod_type == FW_PORT_MOD_TYPE_ER || + mod_type == FW_PORT_MOD_TYPE_LRM) + return PORT_FIBRE; + else if (mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE || + mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE) + return PORT_DA; + else + return PORT_OTHER; } - if (caps & FW_PORT_CAP_ANEG) - v |= SUPPORTED_Autoneg; - return v; + return PORT_OTHER; } -static unsigned int to_fw_linkcaps(unsigned int caps) +/** + * speed_to_fw_caps - translate Port Speed to Firmware Port Capabilities + * @speed: speed in Kb/s + * + * Translates a specific Port Speed into a Firmware Port Capabilities + * value. + */ +static unsigned int speed_to_fw_caps(int speed) { - unsigned int v = 0; - - if (caps & ADVERTISED_100baseT_Full) - v |= FW_PORT_CAP_SPEED_100M; - if (caps & ADVERTISED_1000baseT_Full) - v |= FW_PORT_CAP_SPEED_1G; - if (caps & ADVERTISED_10000baseT_Full) - v |= FW_PORT_CAP_SPEED_10G; - if (caps & ADVERTISED_40000baseSR4_Full) - v |= FW_PORT_CAP_SPEED_40G; - return v; + if (speed == 100) + return FW_PORT_CAP_SPEED_100M; + if (speed == 1000) + return FW_PORT_CAP_SPEED_1G; + if (speed == 10000) + return FW_PORT_CAP_SPEED_10G; + if (speed == 25000) + return FW_PORT_CAP_SPEED_25G; + if (speed == 40000) + return FW_PORT_CAP_SPEED_40G; + if (speed == 100000) + return FW_PORT_CAP_SPEED_100G; + return 0; } -static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +/** + * fw_caps_to_lmm - translate Firmware to ethtool Link Mode Mask + * @port_type: Firmware Port Type + * @fw_caps: Firmware Port Capabilities + * @link_mode_mask: ethtool Link Mode Mask + * + * Translate a Firmware Port Capabilities specification to an ethtool + * Link Mode Mask. + */ +static void fw_caps_to_lmm(enum fw_port_type port_type, + unsigned int fw_caps, + unsigned long *link_mode_mask) { - const struct port_info *p = netdev_priv(dev); - - if (p->port_type == FW_PORT_TYPE_BT_SGMII || - p->port_type == FW_PORT_TYPE_BT_XFI || - p->port_type == FW_PORT_TYPE_BT_XAUI) { - cmd->port = PORT_TP; - } else if (p->port_type == FW_PORT_TYPE_FIBER_XFI || - p->port_type == FW_PORT_TYPE_FIBER_XAUI) { - cmd->port = PORT_FIBRE; - } else if (p->port_type == FW_PORT_TYPE_SFP || - p->port_type == FW_PORT_TYPE_QSFP_10G || - p->port_type == FW_PORT_TYPE_QSA || - p->port_type == FW_PORT_TYPE_QSFP) { - if (p->mod_type == FW_PORT_MOD_TYPE_LR || - p->mod_type == FW_PORT_MOD_TYPE_SR || - p->mod_type == FW_PORT_MOD_TYPE_ER || - p->mod_type == FW_PORT_MOD_TYPE_LRM) - cmd->port = PORT_FIBRE; - else if (p->mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE || - p->mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE) - cmd->port = PORT_DA; - else - cmd->port = PORT_OTHER; + #define SET_LMM(__lmm_name) __set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name \ + ## _BIT, link_mode_mask) + + #define FW_CAPS_TO_LMM(__fw_name, __lmm_name) \ + do { \ + if (fw_caps & FW_PORT_CAP_ ## __fw_name) \ + SET_LMM(__lmm_name); \ + } while (0) + + switch (port_type) { + case FW_PORT_TYPE_BT_SGMII: + case FW_PORT_TYPE_BT_XFI: + case FW_PORT_TYPE_BT_XAUI: + SET_LMM(TP); + FW_CAPS_TO_LMM(SPEED_100M, 100baseT_Full); + FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full); + FW_CAPS_TO_LMM(SPEED_10G, 10000baseT_Full); + break; + + case FW_PORT_TYPE_KX4: + case FW_PORT_TYPE_KX: + SET_LMM(Backplane); + FW_CAPS_TO_LMM(SPEED_1G, 1000baseKX_Full); + FW_CAPS_TO_LMM(SPEED_10G, 10000baseKX4_Full); + break; + + case FW_PORT_TYPE_KR: + SET_LMM(Backplane); + SET_LMM(10000baseKR_Full); + break; + + case FW_PORT_TYPE_BP_AP: + SET_LMM(Backplane); + SET_LMM(10000baseR_FEC); + SET_LMM(10000baseKR_Full); + SET_LMM(1000baseKX_Full); + break; + + case FW_PORT_TYPE_BP4_AP: + SET_LMM(Backplane); + SET_LMM(10000baseR_FEC); + SET_LMM(10000baseKR_Full); + SET_LMM(1000baseKX_Full); + SET_LMM(10000baseKX4_Full); + break; + + case FW_PORT_TYPE_FIBER_XFI: + case FW_PORT_TYPE_FIBER_XAUI: + case FW_PORT_TYPE_SFP: + case FW_PORT_TYPE_QSFP_10G: + case FW_PORT_TYPE_QSA: + SET_LMM(FIBRE); + FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full); + FW_CAPS_TO_LMM(SPEED_10G, 10000baseT_Full); + break; + + case FW_PORT_TYPE_BP40_BA: + case FW_PORT_TYPE_QSFP: + SET_LMM(FIBRE); + SET_LMM(40000baseSR4_Full); + break; + + case FW_PORT_TYPE_CR_QSFP: + case FW_PORT_TYPE_SFP28: + SET_LMM(FIBRE); + SET_LMM(25000baseCR_Full); + break; + + case FW_PORT_TYPE_KR4_100G: + case FW_PORT_TYPE_CR4_QSFP: + SET_LMM(FIBRE); + SET_LMM(100000baseCR4_Full); + break; + + default: + break; + } + + FW_CAPS_TO_LMM(ANEG, Autoneg); + FW_CAPS_TO_LMM(802_3_PAUSE, Pause); + FW_CAPS_TO_LMM(802_3_ASM_DIR, Asym_Pause); + + #undef FW_CAPS_TO_LMM + #undef SET_LMM +} + +/** + * lmm_to_fw_caps - translate ethtool Link Mode Mask to Firmware + * capabilities + * + * @link_mode_mask: ethtool Link Mode Mask + * + * Translate ethtool Link Mode Mask into a Firmware Port capabilities + * value. + */ +static unsigned int lmm_to_fw_caps(const unsigned long *link_mode_mask) +{ + unsigned int fw_caps = 0; + + #define LMM_TO_FW_CAPS(__lmm_name, __fw_name) \ + do { \ + if (test_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \ + link_mode_mask)) \ + fw_caps |= FW_PORT_CAP_ ## __fw_name; \ + } while (0) + + LMM_TO_FW_CAPS(100baseT_Full, SPEED_100M); + LMM_TO_FW_CAPS(1000baseT_Full, SPEED_1G); + LMM_TO_FW_CAPS(10000baseT_Full, SPEED_10G); + LMM_TO_FW_CAPS(40000baseSR4_Full, SPEED_40G); + LMM_TO_FW_CAPS(25000baseCR_Full, SPEED_25G); + LMM_TO_FW_CAPS(100000baseCR4_Full, SPEED_100G); + + #undef LMM_TO_FW_CAPS + + return fw_caps; +} + +static int get_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings *link_ksettings) +{ + const struct port_info *pi = netdev_priv(dev); + struct ethtool_link_settings *base = &link_ksettings->base; + + ethtool_link_ksettings_zero_link_mode(link_ksettings, supported); + ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising); + ethtool_link_ksettings_zero_link_mode(link_ksettings, lp_advertising); + + base->port = from_fw_port_mod_type(pi->port_type, pi->mod_type); + + if (pi->mdio_addr >= 0) { + base->phy_address = pi->mdio_addr; + base->mdio_support = (pi->port_type == FW_PORT_TYPE_BT_SGMII + ? ETH_MDIO_SUPPORTS_C22 + : ETH_MDIO_SUPPORTS_C45); } else { - cmd->port = PORT_OTHER; + base->phy_address = 255; + base->mdio_support = 0; } - if (p->mdio_addr >= 0) { - cmd->phy_address = p->mdio_addr; - cmd->transceiver = XCVR_EXTERNAL; - cmd->mdio_support = p->port_type == FW_PORT_TYPE_BT_SGMII ? - MDIO_SUPPORTS_C22 : MDIO_SUPPORTS_C45; + fw_caps_to_lmm(pi->port_type, pi->link_cfg.supported, + link_ksettings->link_modes.supported); + fw_caps_to_lmm(pi->port_type, pi->link_cfg.advertising, + link_ksettings->link_modes.advertising); + fw_caps_to_lmm(pi->port_type, pi->link_cfg.lp_advertising, + link_ksettings->link_modes.lp_advertising); + + if (netif_carrier_ok(dev)) { + base->speed = pi->link_cfg.speed; + base->duplex = DUPLEX_FULL; } else { - cmd->phy_address = 0; /* not really, but no better option */ - cmd->transceiver = XCVR_INTERNAL; - cmd->mdio_support = 0; + base->speed = SPEED_UNKNOWN; + base->duplex = DUPLEX_UNKNOWN; } - cmd->supported = from_fw_linkcaps(p->port_type, p->link_cfg.supported); - cmd->advertising = from_fw_linkcaps(p->port_type, - p->link_cfg.advertising); - ethtool_cmd_speed_set(cmd, - netif_carrier_ok(dev) ? p->link_cfg.speed : 0); - cmd->duplex = DUPLEX_FULL; - cmd->autoneg = p->link_cfg.autoneg; - cmd->maxtxpkt = 0; - cmd->maxrxpkt = 0; - return 0; -} + base->autoneg = pi->link_cfg.autoneg; + if (pi->link_cfg.supported & FW_PORT_CAP_ANEG) + ethtool_link_ksettings_add_link_mode(link_ksettings, + supported, Autoneg); + if (pi->link_cfg.autoneg) + ethtool_link_ksettings_add_link_mode(link_ksettings, + advertising, Autoneg); -static unsigned int speed_to_caps(int speed) -{ - if (speed == 100) - return FW_PORT_CAP_SPEED_100M; - if (speed == 1000) - return FW_PORT_CAP_SPEED_1G; - if (speed == 10000) - return FW_PORT_CAP_SPEED_10G; - if (speed == 40000) - return FW_PORT_CAP_SPEED_40G; return 0; } -static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +static int set_link_ksettings(struct net_device *dev, + const struct ethtool_link_ksettings + *link_ksettings) { - unsigned int cap; - struct port_info *p = netdev_priv(dev); - struct link_config *lc = &p->link_cfg; - u32 speed = ethtool_cmd_speed(cmd); + struct port_info *pi = netdev_priv(dev); + struct link_config *lc = &pi->link_cfg; + const struct ethtool_link_settings *base = &link_ksettings->base; struct link_config old_lc; - int ret; + unsigned int fw_caps; + int ret = 0; - if (cmd->duplex != DUPLEX_FULL) /* only full-duplex supported */ + /* only full-duplex supported */ + if (base->duplex != DUPLEX_FULL) return -EINVAL; if (!(lc->supported & FW_PORT_CAP_ANEG)) { /* PHY offers a single speed. See if that's what's * being requested. */ - if (cmd->autoneg == AUTONEG_DISABLE && - (lc->supported & speed_to_caps(speed))) + if (base->autoneg == AUTONEG_DISABLE && + (lc->supported & speed_to_fw_caps(base->speed))) return 0; return -EINVAL; } old_lc = *lc; - if (cmd->autoneg == AUTONEG_DISABLE) { - cap = speed_to_caps(speed); + if (base->autoneg == AUTONEG_DISABLE) { + fw_caps = speed_to_fw_caps(base->speed); - if (!(lc->supported & cap)) + if (!(lc->supported & fw_caps)) return -EINVAL; - lc->requested_speed = cap; + lc->requested_speed = fw_caps; lc->advertising = 0; } else { - cap = to_fw_linkcaps(cmd->advertising); - if (!(lc->supported & cap)) + fw_caps = + lmm_to_fw_caps(link_ksettings->link_modes.advertising); + + if (!(lc->supported & fw_caps)) return -EINVAL; lc->requested_speed = 0; - lc->advertising = cap | FW_PORT_CAP_ANEG; + lc->advertising = fw_caps | FW_PORT_CAP_ANEG; } - lc->autoneg = cmd->autoneg; + lc->autoneg = base->autoneg; /* If the firmware rejects the Link Configuration request, back out * the changes and report the error. */ - ret = t4_link_l1cfg(p->adapter, p->adapter->mbox, p->tx_chan, lc); + ret = t4_link_l1cfg(pi->adapter, pi->adapter->mbox, pi->tx_chan, lc); if (ret) *lc = old_lc; @@ -1093,8 +1208,8 @@ static int get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info, } static const struct ethtool_ops cxgb_ethtool_ops = { - .get_settings = get_settings, - .set_settings = set_settings, + .get_link_ksettings = get_link_ksettings, + .set_link_ksettings = set_link_ksettings, .get_drvinfo = get_drvinfo, .get_msglevel = get_msglevel, .set_msglevel = set_msglevel, diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 477db477b133..c45de49dc963 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -64,6 +64,7 @@ #include <net/bonding.h> #include <net/addrconf.h> #include <asm/uaccess.h> +#include <linux/crash_dump.h> #include "cxgb4.h" #include "t4_regs.h" @@ -206,7 +207,7 @@ static int rx_dma_offset = 2; static unsigned int num_vf[NUM_OF_PF_WITH_SRIOV]; module_param_array(num_vf, uint, NULL, 0644); -MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3"); +MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3, deprecated parameter - please use the pci sysfs interface."); #endif /* TX Queue select used to determine what algorithm to use for selecting TX @@ -460,11 +461,8 @@ static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok) struct port_info *pi = netdev_priv(dev); struct adapter *adapter = pi->adapter; - if (!(dev->flags & IFF_PROMISC)) { - __dev_uc_sync(dev, cxgb4_mac_sync, cxgb4_mac_unsync); - if (!(dev->flags & IFF_ALLMULTI)) - __dev_mc_sync(dev, cxgb4_mac_sync, cxgb4_mac_unsync); - } + __dev_uc_sync(dev, cxgb4_mac_sync, cxgb4_mac_unsync); + __dev_mc_sync(dev, cxgb4_mac_sync, cxgb4_mac_unsync); return t4_set_rxmode(adapter, adapter->mbox, pi->viid, mtu, (dev->flags & IFF_PROMISC) ? 1 : 0, @@ -3735,7 +3733,8 @@ static int adap_init0(struct adapter *adap) return ret; /* Contact FW, advertising Master capability */ - ret = t4_fw_hello(adap, adap->mbox, adap->mbox, MASTER_MAY, &state); + ret = t4_fw_hello(adap, adap->mbox, adap->mbox, + is_kdump_kernel() ? MASTER_MUST : MASTER_MAY, &state); if (ret < 0) { dev_err(adap->pdev_dev, "could not connect to FW, error %d\n", ret); @@ -4366,6 +4365,11 @@ static void cfg_queues(struct adapter *adap) if (q10g > netif_get_num_default_rss_queues()) q10g = netif_get_num_default_rss_queues(); + /* Reduce memory usage in kdump environment, disable all offload. + */ + if (is_kdump_kernel()) + adap->params.offload = 0; + for_each_port(adap, i) { struct port_info *pi = adap2pinfo(adap, i); @@ -4829,6 +4833,60 @@ static int get_chip_type(struct pci_dev *pdev, u32 pl_rev) return -EINVAL; } +#ifdef CONFIG_PCI_IOV +static int cxgb4_iov_configure(struct pci_dev *pdev, int num_vfs) +{ + int err = 0; + int current_vfs = pci_num_vf(pdev); + u32 pcie_fw; + void __iomem *regs; + + regs = pci_ioremap_bar(pdev, 0); + if (!regs) { + dev_err(&pdev->dev, "cannot map device registers\n"); + return -ENOMEM; + } + + pcie_fw = readl(regs + PCIE_FW_A); + iounmap(regs); + /* Check if cxgb4 is the MASTER and fw is initialized */ + if (!(pcie_fw & PCIE_FW_INIT_F) || + !(pcie_fw & PCIE_FW_MASTER_VLD_F) || + PCIE_FW_MASTER_G(pcie_fw) != 4) { + dev_warn(&pdev->dev, + "cxgb4 driver needs to be MASTER to support SRIOV\n"); + return -EOPNOTSUPP; + } + + /* If any of the VF's is already assigned to Guest OS, then + * SRIOV for the same cannot be modified + */ + if (current_vfs && pci_vfs_assigned(pdev)) { + dev_err(&pdev->dev, + "Cannot modify SR-IOV while VFs are assigned\n"); + num_vfs = current_vfs; + return num_vfs; + } + + /* Disable SRIOV when zero is passed. + * One needs to disable SRIOV before modifying it, else + * stack throws the below warning: + * " 'n' VFs already enabled. Disable before enabling 'm' VFs." + */ + if (!num_vfs) { + pci_disable_sriov(pdev); + return num_vfs; + } + + if (num_vfs != current_vfs) { + err = pci_enable_sriov(pdev, num_vfs); + if (err) + return err; + } + return num_vfs; +} +#endif + static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int func, i, err, s_qpp, qpp, num_seg; @@ -5162,11 +5220,16 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) sriov: #ifdef CONFIG_PCI_IOV - if (func < ARRAY_SIZE(num_vf) && num_vf[func] > 0) + if (func < ARRAY_SIZE(num_vf) && num_vf[func] > 0) { + dev_warn(&pdev->dev, + "Enabling SR-IOV VFs using the num_vf module " + "parameter is deprecated - please use the pci sysfs " + "interface instead.\n"); if (pci_enable_sriov(pdev, num_vf[func]) == 0) dev_info(&pdev->dev, "instantiated %u virtual functions\n", num_vf[func]); + } #endif return 0; @@ -5259,6 +5322,9 @@ static struct pci_driver cxgb4_driver = { .probe = init_one, .remove = remove_one, .shutdown = remove_one, +#ifdef CONFIG_PCI_IOV + .sriov_configure = cxgb4_iov_configure, +#endif .err_handler = &cxgb4_eeh, }; diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index a63addb4e72c..dc92c80a75f4 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -7219,6 +7219,7 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) lc->speed = speed; lc->fc = fc; lc->supported = be16_to_cpu(p->u.info.pcap); + lc->lp_advertising = be16_to_cpu(p->u.info.lpacap); t4_os_link_changed(adap, pi->port_id, link_ok); } } @@ -7284,6 +7285,7 @@ static void get_pci_mode(struct adapter *adapter, struct pci_params *p) static void init_link_config(struct link_config *lc, unsigned int caps) { lc->supported = caps; + lc->lp_advertising = 0; lc->requested_speed = 0; lc->speed = 0; lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index 392d6644fdd8..a89b30720e38 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -2249,20 +2249,20 @@ struct fw_acl_vlan_cmd { enum fw_port_cap { FW_PORT_CAP_SPEED_100M = 0x0001, FW_PORT_CAP_SPEED_1G = 0x0002, - FW_PORT_CAP_SPEED_2_5G = 0x0004, + FW_PORT_CAP_SPEED_25G = 0x0004, FW_PORT_CAP_SPEED_10G = 0x0008, FW_PORT_CAP_SPEED_40G = 0x0010, FW_PORT_CAP_SPEED_100G = 0x0020, FW_PORT_CAP_FC_RX = 0x0040, FW_PORT_CAP_FC_TX = 0x0080, FW_PORT_CAP_ANEG = 0x0100, - FW_PORT_CAP_MDI_0 = 0x0200, - FW_PORT_CAP_MDI_1 = 0x0400, - FW_PORT_CAP_BEAN = 0x0800, - FW_PORT_CAP_PMA_LPBK = 0x1000, - FW_PORT_CAP_PCS_LPBK = 0x2000, - FW_PORT_CAP_PHYXS_LPBK = 0x4000, - FW_PORT_CAP_FAR_END_LPBK = 0x8000, + FW_PORT_CAP_MDIX = 0x0200, + FW_PORT_CAP_MDIAUTO = 0x0400, + FW_PORT_CAP_FEC = 0x0800, + FW_PORT_CAP_TECHKR = 0x1000, + FW_PORT_CAP_TECHKX4 = 0x2000, + FW_PORT_CAP_802_3_PAUSE = 0x4000, + FW_PORT_CAP_802_3_ASM_DIR = 0x8000, }; enum fw_port_mdi { @@ -2376,7 +2376,8 @@ struct fw_port_cmd { __u8 cbllen; __u8 auxlinfo; __u8 dcbxdis_pkd; - __u8 r8_lo[3]; + __u8 r8_lo; + __be16 lpacap; __be64 r9; } info; struct fw_port_diags { @@ -2555,6 +2556,11 @@ enum fw_port_type { FW_PORT_TYPE_QSA, FW_PORT_TYPE_QSFP, FW_PORT_TYPE_BP40_BA, + FW_PORT_TYPE_KR4_100G, + FW_PORT_TYPE_CR4_QSFP, + FW_PORT_TYPE_CR_QSFP, + FW_PORT_TYPE_CR2_QSFP, + FW_PORT_TYPE_SFP28, FW_PORT_TYPE_NONE = FW_PORT_CMD_PTYPE_M }; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h index 734dd776c22f..109bc630408b 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h @@ -353,6 +353,10 @@ struct hash_mac_addr { u8 addr[ETH_ALEN]; }; +struct mbox_list { + struct list_head list; +}; + /* * Per-"adapter" (Virtual Function) information. */ @@ -387,6 +391,10 @@ struct adapter { /* various locks */ spinlock_t stats_lock; + /* lock for mailbox cmd list */ + spinlock_t mbox_lock; + struct mbox_list mlist; + /* support for mailbox command/reply logging */ #define T4VF_OS_LOG_MBOX_CMDS 256 struct mbox_cmd_log *mbox_log; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index 04fc6f6d1e25..e116bb8d1729 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -937,12 +937,8 @@ static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok) { struct port_info *pi = netdev_priv(dev); - if (!(dev->flags & IFF_PROMISC)) { - __dev_uc_sync(dev, cxgb4vf_mac_sync, cxgb4vf_mac_unsync); - if (!(dev->flags & IFF_ALLMULTI)) - __dev_mc_sync(dev, cxgb4vf_mac_sync, - cxgb4vf_mac_unsync); - } + __dev_uc_sync(dev, cxgb4vf_mac_sync, cxgb4vf_mac_unsync); + __dev_mc_sync(dev, cxgb4vf_mac_sync, cxgb4vf_mac_unsync); return t4vf_set_rxmode(pi->adapter, pi->viid, -1, (dev->flags & IFF_PROMISC) != 0, (dev->flags & IFF_ALLMULTI) != 0, @@ -1205,105 +1201,187 @@ static void cxgb4vf_poll_controller(struct net_device *dev) * state of the port to which we're linked. */ -static unsigned int t4vf_from_fw_linkcaps(enum fw_port_type type, - unsigned int caps) -{ - unsigned int v = 0; - - if (type == FW_PORT_TYPE_BT_SGMII || type == FW_PORT_TYPE_BT_XFI || - type == FW_PORT_TYPE_BT_XAUI) { - v |= SUPPORTED_TP; - if (caps & FW_PORT_CAP_SPEED_100M) - v |= SUPPORTED_100baseT_Full; - if (caps & FW_PORT_CAP_SPEED_1G) - v |= SUPPORTED_1000baseT_Full; - if (caps & FW_PORT_CAP_SPEED_10G) - v |= SUPPORTED_10000baseT_Full; - } else if (type == FW_PORT_TYPE_KX4 || type == FW_PORT_TYPE_KX) { - v |= SUPPORTED_Backplane; - if (caps & FW_PORT_CAP_SPEED_1G) - v |= SUPPORTED_1000baseKX_Full; - if (caps & FW_PORT_CAP_SPEED_10G) - v |= SUPPORTED_10000baseKX4_Full; - } else if (type == FW_PORT_TYPE_KR) - v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full; - else if (type == FW_PORT_TYPE_BP_AP) - v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | - SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full; - else if (type == FW_PORT_TYPE_BP4_AP) - v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | - SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full | - SUPPORTED_10000baseKX4_Full; - else if (type == FW_PORT_TYPE_FIBER_XFI || - type == FW_PORT_TYPE_FIBER_XAUI || - type == FW_PORT_TYPE_SFP || - type == FW_PORT_TYPE_QSFP_10G || - type == FW_PORT_TYPE_QSA) { - v |= SUPPORTED_FIBRE; - if (caps & FW_PORT_CAP_SPEED_1G) - v |= SUPPORTED_1000baseT_Full; - if (caps & FW_PORT_CAP_SPEED_10G) - v |= SUPPORTED_10000baseT_Full; - } else if (type == FW_PORT_TYPE_BP40_BA || - type == FW_PORT_TYPE_QSFP) { - v |= SUPPORTED_40000baseSR4_Full; - v |= SUPPORTED_FIBRE; - } - - if (caps & FW_PORT_CAP_ANEG) - v |= SUPPORTED_Autoneg; - return v; -} - -static int cxgb4vf_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - const struct port_info *p = netdev_priv(dev); - - if (p->port_type == FW_PORT_TYPE_BT_SGMII || - p->port_type == FW_PORT_TYPE_BT_XFI || - p->port_type == FW_PORT_TYPE_BT_XAUI) - cmd->port = PORT_TP; - else if (p->port_type == FW_PORT_TYPE_FIBER_XFI || - p->port_type == FW_PORT_TYPE_FIBER_XAUI) - cmd->port = PORT_FIBRE; - else if (p->port_type == FW_PORT_TYPE_SFP || - p->port_type == FW_PORT_TYPE_QSFP_10G || - p->port_type == FW_PORT_TYPE_QSA || - p->port_type == FW_PORT_TYPE_QSFP) { - if (p->mod_type == FW_PORT_MOD_TYPE_LR || - p->mod_type == FW_PORT_MOD_TYPE_SR || - p->mod_type == FW_PORT_MOD_TYPE_ER || - p->mod_type == FW_PORT_MOD_TYPE_LRM) - cmd->port = PORT_FIBRE; - else if (p->mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE || - p->mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE) - cmd->port = PORT_DA; +/** + * from_fw_port_mod_type - translate Firmware Port/Module type to Ethtool + * @port_type: Firmware Port Type + * @mod_type: Firmware Module Type + * + * Translate Firmware Port/Module type to Ethtool Port Type. + */ +static int from_fw_port_mod_type(enum fw_port_type port_type, + enum fw_port_module_type mod_type) +{ + if (port_type == FW_PORT_TYPE_BT_SGMII || + port_type == FW_PORT_TYPE_BT_XFI || + port_type == FW_PORT_TYPE_BT_XAUI) { + return PORT_TP; + } else if (port_type == FW_PORT_TYPE_FIBER_XFI || + port_type == FW_PORT_TYPE_FIBER_XAUI) { + return PORT_FIBRE; + } else if (port_type == FW_PORT_TYPE_SFP || + port_type == FW_PORT_TYPE_QSFP_10G || + port_type == FW_PORT_TYPE_QSA || + port_type == FW_PORT_TYPE_QSFP) { + if (mod_type == FW_PORT_MOD_TYPE_LR || + mod_type == FW_PORT_MOD_TYPE_SR || + mod_type == FW_PORT_MOD_TYPE_ER || + mod_type == FW_PORT_MOD_TYPE_LRM) + return PORT_FIBRE; + else if (mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE || + mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE) + return PORT_DA; else - cmd->port = PORT_OTHER; - } else - cmd->port = PORT_OTHER; + return PORT_OTHER; + } + + return PORT_OTHER; +} + +/** + * fw_caps_to_lmm - translate Firmware to ethtool Link Mode Mask + * @port_type: Firmware Port Type + * @fw_caps: Firmware Port Capabilities + * @link_mode_mask: ethtool Link Mode Mask + * + * Translate a Firmware Port Capabilities specification to an ethtool + * Link Mode Mask. + */ +static void fw_caps_to_lmm(enum fw_port_type port_type, + unsigned int fw_caps, + unsigned long *link_mode_mask) +{ + #define SET_LMM(__lmm_name) __set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name\ + ## _BIT, link_mode_mask) + + #define FW_CAPS_TO_LMM(__fw_name, __lmm_name) \ + do { \ + if (fw_caps & FW_PORT_CAP_ ## __fw_name) \ + SET_LMM(__lmm_name); \ + } while (0) + + switch (port_type) { + case FW_PORT_TYPE_BT_SGMII: + case FW_PORT_TYPE_BT_XFI: + case FW_PORT_TYPE_BT_XAUI: + SET_LMM(TP); + FW_CAPS_TO_LMM(SPEED_100M, 100baseT_Full); + FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full); + FW_CAPS_TO_LMM(SPEED_10G, 10000baseT_Full); + break; + + case FW_PORT_TYPE_KX4: + case FW_PORT_TYPE_KX: + SET_LMM(Backplane); + FW_CAPS_TO_LMM(SPEED_1G, 1000baseKX_Full); + FW_CAPS_TO_LMM(SPEED_10G, 10000baseKX4_Full); + break; + + case FW_PORT_TYPE_KR: + SET_LMM(Backplane); + SET_LMM(10000baseKR_Full); + break; + + case FW_PORT_TYPE_BP_AP: + SET_LMM(Backplane); + SET_LMM(10000baseR_FEC); + SET_LMM(10000baseKR_Full); + SET_LMM(1000baseKX_Full); + break; + + case FW_PORT_TYPE_BP4_AP: + SET_LMM(Backplane); + SET_LMM(10000baseR_FEC); + SET_LMM(10000baseKR_Full); + SET_LMM(1000baseKX_Full); + SET_LMM(10000baseKX4_Full); + break; + + case FW_PORT_TYPE_FIBER_XFI: + case FW_PORT_TYPE_FIBER_XAUI: + case FW_PORT_TYPE_SFP: + case FW_PORT_TYPE_QSFP_10G: + case FW_PORT_TYPE_QSA: + SET_LMM(FIBRE); + FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full); + FW_CAPS_TO_LMM(SPEED_10G, 10000baseT_Full); + break; + + case FW_PORT_TYPE_BP40_BA: + case FW_PORT_TYPE_QSFP: + SET_LMM(FIBRE); + SET_LMM(40000baseSR4_Full); + break; + + case FW_PORT_TYPE_CR_QSFP: + case FW_PORT_TYPE_SFP28: + SET_LMM(FIBRE); + SET_LMM(25000baseCR_Full); + break; + + case FW_PORT_TYPE_KR4_100G: + case FW_PORT_TYPE_CR4_QSFP: + SET_LMM(FIBRE); + SET_LMM(100000baseCR4_Full); + break; + + default: + break; + } + + FW_CAPS_TO_LMM(ANEG, Autoneg); + FW_CAPS_TO_LMM(802_3_PAUSE, Pause); + FW_CAPS_TO_LMM(802_3_ASM_DIR, Asym_Pause); + + #undef FW_CAPS_TO_LMM + #undef SET_LMM +} + +static int cxgb4vf_get_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings + *link_ksettings) +{ + const struct port_info *pi = netdev_priv(dev); + struct ethtool_link_settings *base = &link_ksettings->base; - if (p->mdio_addr >= 0) { - cmd->phy_address = p->mdio_addr; - cmd->transceiver = XCVR_EXTERNAL; - cmd->mdio_support = p->port_type == FW_PORT_TYPE_BT_SGMII ? - MDIO_SUPPORTS_C22 : MDIO_SUPPORTS_C45; + ethtool_link_ksettings_zero_link_mode(link_ksettings, supported); + ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising); + ethtool_link_ksettings_zero_link_mode(link_ksettings, lp_advertising); + + base->port = from_fw_port_mod_type(pi->port_type, pi->mod_type); + + if (pi->mdio_addr >= 0) { + base->phy_address = pi->mdio_addr; + base->mdio_support = (pi->port_type == FW_PORT_TYPE_BT_SGMII + ? ETH_MDIO_SUPPORTS_C22 + : ETH_MDIO_SUPPORTS_C45); } else { - cmd->phy_address = 0; /* not really, but no better option */ - cmd->transceiver = XCVR_INTERNAL; - cmd->mdio_support = 0; - } - - cmd->supported = t4vf_from_fw_linkcaps(p->port_type, - p->link_cfg.supported); - cmd->advertising = t4vf_from_fw_linkcaps(p->port_type, - p->link_cfg.advertising); - ethtool_cmd_speed_set(cmd, - netif_carrier_ok(dev) ? p->link_cfg.speed : 0); - cmd->duplex = DUPLEX_FULL; - cmd->autoneg = p->link_cfg.autoneg; - cmd->maxtxpkt = 0; - cmd->maxrxpkt = 0; + base->phy_address = 255; + base->mdio_support = 0; + } + + fw_caps_to_lmm(pi->port_type, pi->link_cfg.supported, + link_ksettings->link_modes.supported); + fw_caps_to_lmm(pi->port_type, pi->link_cfg.advertising, + link_ksettings->link_modes.advertising); + fw_caps_to_lmm(pi->port_type, pi->link_cfg.lp_advertising, + link_ksettings->link_modes.lp_advertising); + + if (netif_carrier_ok(dev)) { + base->speed = pi->link_cfg.speed; + base->duplex = DUPLEX_FULL; + } else { + base->speed = SPEED_UNKNOWN; + base->duplex = DUPLEX_UNKNOWN; + } + + base->autoneg = pi->link_cfg.autoneg; + if (pi->link_cfg.supported & FW_PORT_CAP_ANEG) + ethtool_link_ksettings_add_link_mode(link_ksettings, + supported, Autoneg); + if (pi->link_cfg.autoneg) + ethtool_link_ksettings_add_link_mode(link_ksettings, + advertising, Autoneg); + return 0; } @@ -1679,7 +1757,7 @@ static void cxgb4vf_get_wol(struct net_device *dev, #define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN) static const struct ethtool_ops cxgb4vf_ethtool_ops = { - .get_settings = cxgb4vf_get_settings, + .get_link_ksettings = cxgb4vf_get_link_ksettings, .get_drvinfo = cxgb4vf_get_drvinfo, .get_msglevel = cxgb4vf_get_msglevel, .set_msglevel = cxgb4vf_set_msglevel, @@ -2778,6 +2856,8 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev, * Initialize SMP data synchronization resources. */ spin_lock_init(&adapter->stats_lock); + spin_lock_init(&adapter->mbox_lock); + INIT_LIST_HEAD(&adapter->mlist.list); /* * Map our I/O registers in BAR0. diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h index 438374a05791..8ee541431e8b 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h @@ -107,6 +107,7 @@ struct t4vf_port_stats { struct link_config { unsigned int supported; /* link capabilities */ unsigned int advertising; /* advertised capabilities */ + unsigned short lp_advertising; /* peer advertised capabilities */ unsigned short requested_speed; /* speed user has requested */ unsigned short speed; /* actual link speed */ unsigned char requested_fc; /* flow control user has requested */ diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c index 955ff7c61f1b..427bfa71388b 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -139,6 +139,7 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, u32 mbox_ctl = T4VF_CIM_BASE_ADDR + CIM_VF_EXT_MAILBOX_CTRL; u32 cmd_op = FW_CMD_OP_G(be32_to_cpu(((struct fw_cmd_hdr *)cmd)->hi)); __be64 cmd_rpl[MBOX_LEN / 8]; + struct mbox_list entry; /* In T6, mailbox size is changed to 128 bytes to avoid * invalidating the entire prefetch buffer. @@ -156,6 +157,51 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, size > NUM_CIM_VF_MAILBOX_DATA_INSTANCES * 4) return -EINVAL; + /* Queue ourselves onto the mailbox access list. When our entry is at + * the front of the list, we have rights to access the mailbox. So we + * wait [for a while] till we're at the front [or bail out with an + * EBUSY] ... + */ + spin_lock(&adapter->mbox_lock); + list_add_tail(&entry.list, &adapter->mlist.list); + spin_unlock(&adapter->mbox_lock); + + delay_idx = 0; + ms = delay[0]; + + for (i = 0; ; i += ms) { + /* If we've waited too long, return a busy indication. This + * really ought to be based on our initial position in the + * mailbox access list but this is a start. We very rearely + * contend on access to the mailbox ... + */ + if (i > FW_CMD_MAX_TIMEOUT) { + spin_lock(&adapter->mbox_lock); + list_del(&entry.list); + spin_unlock(&adapter->mbox_lock); + ret = -EBUSY; + t4vf_record_mbox(adapter, cmd, size, access, ret); + return ret; + } + + /* If we're at the head, break out and start the mailbox + * protocol. + */ + if (list_first_entry(&adapter->mlist.list, struct mbox_list, + list) == &entry) + break; + + /* Delay for a bit before checking again ... */ + if (sleep_ok) { + ms = delay[delay_idx]; /* last element may repeat */ + if (delay_idx < ARRAY_SIZE(delay) - 1) + delay_idx++; + msleep(ms); + } else { + mdelay(ms); + } + } + /* * Loop trying to get ownership of the mailbox. Return an error * if we can't gain ownership. @@ -164,6 +210,9 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++) v = MBOWNER_G(t4_read_reg(adapter, mbox_ctl)); if (v != MBOX_OWNER_DRV) { + spin_lock(&adapter->mbox_lock); + list_del(&entry.list); + spin_unlock(&adapter->mbox_lock); ret = (v == MBOX_OWNER_FW) ? -EBUSY : -ETIMEDOUT; t4vf_record_mbox(adapter, cmd, size, access, ret); return ret; @@ -248,6 +297,9 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, if (cmd_op != FW_VI_STATS_CMD) t4vf_record_mbox(adapter, cmd_rpl, size, access, execute); + spin_lock(&adapter->mbox_lock); + list_del(&entry.list); + spin_unlock(&adapter->mbox_lock); return -FW_CMD_RETVAL_G(v); } } @@ -255,6 +307,9 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, /* We timed out. Return the error ... */ ret = -ETIMEDOUT; t4vf_record_mbox(adapter, cmd, size, access, ret); + spin_lock(&adapter->mbox_lock); + list_del(&entry.list); + spin_unlock(&adapter->mbox_lock); return ret; } @@ -273,6 +328,7 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, static void init_link_config(struct link_config *lc, unsigned int caps) { lc->supported = caps; + lc->lp_advertising = 0; lc->requested_speed = 0; lc->speed = 0; lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; @@ -1688,6 +1744,8 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) lc->fc = fc; lc->supported = be16_to_cpu(port_cmd->u.info.pcap); + lc->lp_advertising = + be16_to_cpu(port_cmd->u.info.lpacap); t4vf_os_link_changed(adapter, pidx, link_ok); } } diff --git a/drivers/net/ethernet/chelsio/libcxgb/Makefile b/drivers/net/ethernet/chelsio/libcxgb/Makefile new file mode 100644 index 000000000000..2362230ef4fe --- /dev/null +++ b/drivers/net/ethernet/chelsio/libcxgb/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_CHELSIO_LIB) += libcxgb.o + +libcxgb-y := libcxgb_ppm.o diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ppm.c b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c index d88a7a7b2400..0ed161642371 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ppm.c +++ b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c @@ -1,17 +1,44 @@ /* - * cxgb4_ppm.c: Chelsio common library for T4/T5 iSCSI PagePod Manager + * libcxgb_ppm.c: Chelsio common library for T3/T4/T5 iSCSI PagePod Manager * * Copyright (c) 2016 Chelsio Communications, Inc. All rights reserved. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. * * Written by: Karen Xie (kxie@chelsio.com) */ +#define DRV_NAME "libcxgb" +#define DRV_VERSION "1.0.0-ko" +#define pr_fmt(fmt) DRV_NAME ": " fmt + #include <linux/kernel.h> -#include <linux/version.h> #include <linux/module.h> #include <linux/errno.h> #include <linux/types.h> @@ -22,7 +49,7 @@ #include <linux/pci.h> #include <linux/scatterlist.h> -#include "cxgb4_ppm.h" +#include "libcxgb_ppm.h" /* Direct Data Placement - * Directly place the iSCSI Data-In or Data-Out PDU's payload into @@ -309,6 +336,7 @@ int cxgbi_ppm_release(struct cxgbi_ppm *ppm) } return 1; } +EXPORT_SYMBOL(cxgbi_ppm_release); static struct cxgbi_ppm_pool *ppm_alloc_cpu_pool(unsigned int *total, unsigned int *pcpu_ppmax) @@ -462,3 +490,9 @@ unsigned int cxgbi_tagmask_set(unsigned int ppmax) return 1 << (bits + PPOD_IDX_SHIFT); } +EXPORT_SYMBOL(cxgbi_tagmask_set); + +MODULE_AUTHOR("Chelsio Communications"); +MODULE_DESCRIPTION("Chelsio common library"); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ppm.h b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.h index d48732673b75..e995a1a3840a 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ppm.h +++ b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.h @@ -1,17 +1,41 @@ /* - * cxgb4_ppm.h: Chelsio common library for T4/T5 iSCSI ddp operation + * libcxgb_ppm.h: Chelsio common library for T3/T4/T5 iSCSI ddp operation * * Copyright (c) 2016 Chelsio Communications, Inc. All rights reserved. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. * * Written by: Karen Xie (kxie@chelsio.com) */ -#ifndef __CXGB4PPM_H__ -#define __CXGB4PPM_H__ +#ifndef __LIBCXGB_PPM_H__ +#define __LIBCXGB_PPM_H__ #include <linux/kernel.h> #include <linux/errno.h> @@ -307,4 +331,4 @@ int cxgbi_ppm_release(struct cxgbi_ppm *ppm); void cxgbi_tagmask_check(unsigned int tagmask, struct cxgbi_tag_format *); unsigned int cxgbi_tagmask_set(unsigned int ppmax); -#endif /*__CXGB4PPM_H__*/ +#endif /*__LIBCXGB_PPM_H__*/ |