summaryrefslogtreecommitdiff
path: root/drivers/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd')
-rw-r--r--drivers/mfd/Kconfig28
-rw-r--r--drivers/mfd/Makefile4
-rw-r--r--drivers/mfd/ac100.c137
-rw-r--r--drivers/mfd/arizona-core.c30
-rw-r--r--drivers/mfd/axp20x-rsb.c1
-rw-r--r--drivers/mfd/axp20x.c72
-rw-r--r--drivers/mfd/cros_ec.c58
-rw-r--r--drivers/mfd/lp873x.c99
-rw-r--r--drivers/mfd/pm8921-core.c1
-rw-r--r--drivers/mfd/qcom_rpm.c51
-rw-r--r--drivers/mfd/rk808.c226
11 files changed, 669 insertions, 38 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2d1fb6420592..69b6fe2b982e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -112,6 +112,16 @@ config MFD_BCM590XX
help
Support for the BCM590xx PMUs from Broadcom
+config MFD_AC100
+ tristate "X-Powers AC100"
+ select MFD_CORE
+ depends on SUNXI_RSB
+ help
+ If you say Y here you get support for the X-Powers AC100 audio codec
+ IC.
+ This driver include only the core APIs. You have to select individual
+ components like codecs or RTC under the corresponding menus.
+
config MFD_AXP20X
tristate
select MFD_CORE
@@ -852,13 +862,13 @@ config MFD_RC5T583
different functionality of the device.
config MFD_RK808
- tristate "Rockchip RK808 Power Management chip"
+ tristate "Rockchip RK808/RK818 Power Management Chip"
depends on I2C && OF
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
help
- If you say yes here you get support for the RK808
+ If you say yes here you get support for the RK808 and RK818
Power Management chips.
This driver provides common support for accessing the device
through I2C interface. The device supports multiple sub-devices
@@ -1224,6 +1234,20 @@ config MFD_TPS65217
This driver can also be built as a module. If so, the module
will be called tps65217.
+config MFD_TI_LP873X
+ tristate "TI LP873X Power Management IC"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ If you say yes here then you get support for the LP873X series of
+ Power Management Integrated Circuits (PMIC).
+ These include voltage regulators, thermal protection, configurable
+ General Purpose Outputs (GPO) that are used in portable devices.
+
+ This driver can also be built as a module. If so, the module
+ will be called lp873x.
+
config MFD_TPS65218
tristate "TI TPS65218 Power Management chips"
depends on I2C
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2ba3ba35f745..5bf35c6a528b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
+obj-$(CONFIG_MFD_TI_LP873X) += lp873x.o
+
obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o
@@ -113,6 +115,8 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o
obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
+
+obj-$(CONFIG_MFD_AC100) += ac100.o
obj-$(CONFIG_MFD_AXP20X) += axp20x.o
obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o
obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o
diff --git a/drivers/mfd/ac100.c b/drivers/mfd/ac100.c
new file mode 100644
index 000000000000..9bc69cd7807d
--- /dev/null
+++ b/drivers/mfd/ac100.c
@@ -0,0 +1,137 @@
+/*
+ * MFD core driver for X-Powers' AC100 Audio Codec IC
+ *
+ * The AC100 is a highly integrated audio codec and RTC subsystem designed
+ * for mobile applications. It has 3 I2S/PCM interfaces, a 2 channel DAC,
+ * a 2 channel ADC with 5 inputs and a builtin mixer. The RTC subsystem has
+ * 3 clock outputs.
+ *
+ * The audio codec and RTC parts are completely separate, sharing only the
+ * host interface for access to its registers.
+ *
+ * Copyright (2016) Chen-Yu Tsai
+ *
+ * Author: Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ac100.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/sunxi-rsb.h>
+
+static const struct regmap_range ac100_writeable_ranges[] = {
+ regmap_reg_range(AC100_CHIP_AUDIO_RST, AC100_I2S_SR_CTRL),
+ regmap_reg_range(AC100_I2S1_CLK_CTRL, AC100_I2S1_MXR_GAIN),
+ regmap_reg_range(AC100_I2S2_CLK_CTRL, AC100_I2S2_MXR_GAIN),
+ regmap_reg_range(AC100_I2S3_CLK_CTRL, AC100_I2S3_SIG_PATH_CTRL),
+ regmap_reg_range(AC100_ADC_DIG_CTRL, AC100_ADC_VOL_CTRL),
+ regmap_reg_range(AC100_HMIC_CTRL1, AC100_HMIC_STATUS),
+ regmap_reg_range(AC100_DAC_DIG_CTRL, AC100_DAC_MXR_GAIN),
+ regmap_reg_range(AC100_ADC_APC_CTRL, AC100_LINEOUT_CTRL),
+ regmap_reg_range(AC100_ADC_DAP_L_CTRL, AC100_ADC_DAP_OPT),
+ regmap_reg_range(AC100_DAC_DAP_CTRL, AC100_DAC_DAP_OPT),
+ regmap_reg_range(AC100_ADC_DAP_ENA, AC100_DAC_DAP_ENA),
+ regmap_reg_range(AC100_SRC1_CTRL1, AC100_SRC1_CTRL2),
+ regmap_reg_range(AC100_SRC2_CTRL1, AC100_SRC2_CTRL2),
+ regmap_reg_range(AC100_CLK32K_ANALOG_CTRL, AC100_CLKOUT_CTRL3),
+ regmap_reg_range(AC100_RTC_RST, AC100_RTC_UPD),
+ regmap_reg_range(AC100_ALM_INT_ENA, AC100_ALM_INT_STA),
+ regmap_reg_range(AC100_ALM_SEC, AC100_RTC_GP(15)),
+};
+
+static const struct regmap_range ac100_volatile_ranges[] = {
+ regmap_reg_range(AC100_CHIP_AUDIO_RST, AC100_PLL_CTRL2),
+ regmap_reg_range(AC100_HMIC_STATUS, AC100_HMIC_STATUS),
+ regmap_reg_range(AC100_ADC_DAP_L_STA, AC100_ADC_DAP_L_STA),
+ regmap_reg_range(AC100_SRC1_CTRL1, AC100_SRC1_CTRL1),
+ regmap_reg_range(AC100_SRC1_CTRL3, AC100_SRC2_CTRL1),
+ regmap_reg_range(AC100_SRC2_CTRL3, AC100_SRC2_CTRL4),
+ regmap_reg_range(AC100_RTC_RST, AC100_RTC_RST),
+ regmap_reg_range(AC100_RTC_SEC, AC100_ALM_INT_STA),
+ regmap_reg_range(AC100_ALM_SEC, AC100_ALM_UPD),
+};
+
+static const struct regmap_access_table ac100_writeable_table = {
+ .yes_ranges = ac100_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(ac100_writeable_ranges),
+};
+
+static const struct regmap_access_table ac100_volatile_table = {
+ .yes_ranges = ac100_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(ac100_volatile_ranges),
+};
+
+static const struct regmap_config ac100_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .wr_table = &ac100_writeable_table,
+ .volatile_table = &ac100_volatile_table,
+ .max_register = AC100_RTC_GP(15),
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static struct mfd_cell ac100_cells[] = {
+ {
+ .name = "ac100-codec",
+ .of_compatible = "x-powers,ac100-codec",
+ }, {
+ .name = "ac100-rtc",
+ .of_compatible = "x-powers,ac100-rtc",
+ },
+};
+
+static int ac100_rsb_probe(struct sunxi_rsb_device *rdev)
+{
+ struct ac100_dev *ac100;
+ int ret;
+
+ ac100 = devm_kzalloc(&rdev->dev, sizeof(*ac100), GFP_KERNEL);
+ if (!ac100)
+ return -ENOMEM;
+
+ ac100->dev = &rdev->dev;
+ sunxi_rsb_device_set_drvdata(rdev, ac100);
+
+ ac100->regmap = devm_regmap_init_sunxi_rsb(rdev, &ac100_regmap_config);
+ if (IS_ERR(ac100->regmap)) {
+ ret = PTR_ERR(ac100->regmap);
+ dev_err(ac100->dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_mfd_add_devices(ac100->dev, PLATFORM_DEVID_NONE, ac100_cells,
+ ARRAY_SIZE(ac100_cells), NULL, 0, NULL);
+ if (ret) {
+ dev_err(ac100->dev, "failed to add MFD devices: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id ac100_of_match[] = {
+ { .compatible = "x-powers,ac100" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ac100_of_match);
+
+static struct sunxi_rsb_driver ac100_rsb_driver = {
+ .driver = {
+ .name = "ac100",
+ .of_match_table = of_match_ptr(ac100_of_match),
+ },
+ .probe = ac100_rsb_probe,
+};
+module_sunxi_rsb_driver(ac100_rsb_driver);
+
+MODULE_DESCRIPTION("Audio codec MFD core driver for AC100");
+MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index e4f97b3c824b..4fa0fae51006 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
@@ -49,7 +50,15 @@ int arizona_clk32k_enable(struct arizona *arizona)
case ARIZONA_32KZ_MCLK1:
ret = pm_runtime_get_sync(arizona->dev);
if (ret != 0)
- goto out;
+ goto err_ref;
+ ret = clk_prepare_enable(arizona->mclk[ARIZONA_MCLK1]);
+ if (ret != 0)
+ goto err_pm;
+ break;
+ case ARIZONA_32KZ_MCLK2:
+ ret = clk_prepare_enable(arizona->mclk[ARIZONA_MCLK2]);
+ if (ret != 0)
+ goto err_ref;
break;
}
@@ -58,7 +67,9 @@ int arizona_clk32k_enable(struct arizona *arizona)
ARIZONA_CLK_32K_ENA);
}
-out:
+err_pm:
+ pm_runtime_put_sync(arizona->dev);
+err_ref:
if (ret != 0)
arizona->clk32k_ref--;
@@ -83,6 +94,10 @@ int arizona_clk32k_disable(struct arizona *arizona)
switch (arizona->pdata.clk32k_src) {
case ARIZONA_32KZ_MCLK1:
pm_runtime_put_sync(arizona->dev);
+ clk_disable_unprepare(arizona->mclk[ARIZONA_MCLK1]);
+ break;
+ case ARIZONA_32KZ_MCLK2:
+ clk_disable_unprepare(arizona->mclk[ARIZONA_MCLK2]);
break;
}
}
@@ -1000,6 +1015,7 @@ static const struct mfd_cell wm8998_devs[] = {
int arizona_dev_init(struct arizona *arizona)
{
+ const char * const mclk_name[] = { "mclk1", "mclk2" };
struct device *dev = arizona->dev;
const char *type_name = NULL;
unsigned int reg, val, mask;
@@ -1016,6 +1032,16 @@ int arizona_dev_init(struct arizona *arizona)
else
arizona_of_get_core_pdata(arizona);
+ BUILD_BUG_ON(ARRAY_SIZE(arizona->mclk) != ARRAY_SIZE(mclk_name));
+ for (i = 0; i < ARRAY_SIZE(arizona->mclk); i++) {
+ arizona->mclk[i] = devm_clk_get(arizona->dev, mclk_name[i]);
+ if (IS_ERR(arizona->mclk[i])) {
+ dev_info(arizona->dev, "Failed to get %s: %ld\n",
+ mclk_name[i], PTR_ERR(arizona->mclk[i]));
+ arizona->mclk[i] = NULL;
+ }
+ }
+
regcache_cache_only(arizona->regmap, true);
switch (arizona->type) {
diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
index a407527bcd09..a732cb50bcff 100644
--- a/drivers/mfd/axp20x-rsb.c
+++ b/drivers/mfd/axp20x-rsb.c
@@ -61,6 +61,7 @@ static int axp20x_rsb_remove(struct sunxi_rsb_device *rdev)
static const struct of_device_id axp20x_rsb_of_match[] = {
{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
+ { .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
{ .compatible = "x-powers,axp809", .data = (void *)AXP809_ID },
{ },
};
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index fd80b0981f0f..96102753847f 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -38,6 +38,7 @@ static const char * const axp20x_model_names[] = {
"AXP221",
"AXP223",
"AXP288",
+ "AXP806",
"AXP809",
};
@@ -129,6 +130,27 @@ static const struct regmap_access_table axp288_volatile_table = {
.n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges),
};
+static const struct regmap_range axp806_writeable_ranges[] = {
+ regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_DATACACHE(3)),
+ regmap_reg_range(AXP806_PWR_OUT_CTRL1, AXP806_CLDO3_V_CTRL),
+ regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ2_EN),
+ regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE),
+};
+
+static const struct regmap_range axp806_volatile_ranges[] = {
+ regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE),
+};
+
+static const struct regmap_access_table axp806_writeable_table = {
+ .yes_ranges = axp806_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp806_writeable_ranges),
+};
+
+static const struct regmap_access_table axp806_volatile_table = {
+ .yes_ranges = axp806_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp806_volatile_ranges),
+};
+
static struct resource axp152_pek_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
@@ -278,6 +300,15 @@ static const struct regmap_config axp288_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
+static const struct regmap_config axp806_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp806_writeable_table,
+ .volatile_table = &axp806_volatile_table,
+ .max_register = AXP806_VREF_TEMP_WARN_L,
+ .cache_type = REGCACHE_RBTREE,
+};
+
#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \
[_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
@@ -409,6 +440,21 @@ static const struct regmap_irq axp288_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
};
+static const struct regmap_irq axp806_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP806, DIE_TEMP_HIGH_LV1, 0, 0),
+ INIT_REGMAP_IRQ(AXP806, DIE_TEMP_HIGH_LV2, 0, 1),
+ INIT_REGMAP_IRQ(AXP806, DCDCA_V_LOW, 0, 3),
+ INIT_REGMAP_IRQ(AXP806, DCDCB_V_LOW, 0, 4),
+ INIT_REGMAP_IRQ(AXP806, DCDCC_V_LOW, 0, 5),
+ INIT_REGMAP_IRQ(AXP806, DCDCD_V_LOW, 0, 6),
+ INIT_REGMAP_IRQ(AXP806, DCDCE_V_LOW, 0, 7),
+ INIT_REGMAP_IRQ(AXP806, PWROK_LONG, 1, 0),
+ INIT_REGMAP_IRQ(AXP806, PWROK_SHORT, 1, 1),
+ INIT_REGMAP_IRQ(AXP806, WAKEUP, 1, 4),
+ INIT_REGMAP_IRQ(AXP806, PWROK_FALL, 1, 5),
+ INIT_REGMAP_IRQ(AXP806, PWROK_RISE, 1, 6),
+};
+
static const struct regmap_irq axp809_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP809, ACIN_OVER_V, 0, 7),
INIT_REGMAP_IRQ(AXP809, ACIN_PLUGIN, 0, 6),
@@ -494,6 +540,18 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
};
+static const struct regmap_irq_chip axp806_regmap_irq_chip = {
+ .name = "axp806",
+ .status_base = AXP20X_IRQ1_STATE,
+ .ack_base = AXP20X_IRQ1_STATE,
+ .mask_base = AXP20X_IRQ1_EN,
+ .mask_invert = true,
+ .init_ack_masked = true,
+ .irqs = axp806_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp806_regmap_irqs),
+ .num_regs = 2,
+};
+
static const struct regmap_irq_chip axp809_regmap_irq_chip = {
.name = "axp809",
.status_base = AXP20X_IRQ1_STATE,
@@ -660,12 +718,20 @@ static struct mfd_cell axp288_cells[] = {
},
};
+static struct mfd_cell axp806_cells[] = {
+ {
+ .id = 2,
+ .name = "axp20x-regulator",
+ },
+};
+
static struct mfd_cell axp809_cells[] = {
{
.name = "axp20x-pek",
.num_resources = ARRAY_SIZE(axp809_pek_resources),
.resources = axp809_pek_resources,
}, {
+ .id = 1,
.name = "axp20x-regulator",
},
};
@@ -732,6 +798,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
axp20x->regmap_cfg = &axp288_regmap_config;
axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
break;
+ case AXP806_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp806_cells);
+ axp20x->cells = axp806_cells;
+ axp20x->regmap_cfg = &axp806_regmap_config;
+ axp20x->regmap_irq_chip = &axp806_regmap_irq_chip;
+ break;
case AXP809_ID:
axp20x->nr_cells = ARRAY_SIZE(axp809_cells);
axp20x->cells = axp809_cells;
diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
index 0eee63542038..abd83424b498 100644
--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/mfd/core.h>
#include <linux/mfd/cros_ec.h>
+#include <asm/unaligned.h>
#define CROS_EC_DEV_EC_INDEX 0
#define CROS_EC_DEV_PD_INDEX 1
@@ -49,11 +50,28 @@ static const struct mfd_cell ec_pd_cell = {
.pdata_size = sizeof(pd_p),
};
+static irqreturn_t ec_irq_thread(int irq, void *data)
+{
+ struct cros_ec_device *ec_dev = data;
+ int ret;
+
+ if (device_may_wakeup(ec_dev->dev))
+ pm_wakeup_event(ec_dev->dev, 0);
+
+ ret = cros_ec_get_next_event(ec_dev);
+ if (ret > 0)
+ blocking_notifier_call_chain(&ec_dev->event_notifier,
+ 0, ec_dev);
+ return IRQ_HANDLED;
+}
+
int cros_ec_register(struct cros_ec_device *ec_dev)
{
struct device *dev = ec_dev->dev;
int err = 0;
+ BLOCKING_INIT_NOTIFIER_HEAD(&ec_dev->event_notifier);
+
ec_dev->max_request = sizeof(struct ec_params_hello);
ec_dev->max_response = sizeof(struct ec_response_get_protocol_info);
ec_dev->max_passthru = 0;
@@ -70,13 +88,24 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
cros_ec_query_all(ec_dev);
+ if (ec_dev->irq) {
+ err = request_threaded_irq(ec_dev->irq, NULL, ec_irq_thread,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "chromeos-ec", ec_dev);
+ if (err) {
+ dev_err(dev, "Failed to request IRQ %d: %d",
+ ec_dev->irq, err);
+ return err;
+ }
+ }
+
err = mfd_add_devices(ec_dev->dev, PLATFORM_DEVID_AUTO, &ec_cell, 1,
NULL, ec_dev->irq, NULL);
if (err) {
dev_err(dev,
"Failed to register Embedded Controller subdevice %d\n",
err);
- return err;
+ goto fail_mfd;
}
if (ec_dev->max_passthru) {
@@ -94,7 +123,7 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
dev_err(dev,
"Failed to register Power Delivery subdevice %d\n",
err);
- return err;
+ goto fail_mfd;
}
}
@@ -103,13 +132,18 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
if (err) {
mfd_remove_devices(dev);
dev_err(dev, "Failed to register sub-devices\n");
- return err;
+ goto fail_mfd;
}
}
dev_info(dev, "Chrome EC device registered\n");
return 0;
+
+fail_mfd:
+ if (ec_dev->irq)
+ free_irq(ec_dev->irq, ec_dev);
+ return err;
}
EXPORT_SYMBOL(cros_ec_register);
@@ -136,13 +170,31 @@ int cros_ec_suspend(struct cros_ec_device *ec_dev)
}
EXPORT_SYMBOL(cros_ec_suspend);
+static void cros_ec_drain_events(struct cros_ec_device *ec_dev)
+{
+ while (cros_ec_get_next_event(ec_dev) > 0)
+ blocking_notifier_call_chain(&ec_dev->event_notifier,
+ 1, ec_dev);
+}
+
int cros_ec_resume(struct cros_ec_device *ec_dev)
{
enable_irq(ec_dev->irq);
+ /*
+ * In some cases, we need to distinguish between events that occur
+ * during suspend if the EC is not a wake source. For example,
+ * keypresses during suspend should be discarded if it does not wake
+ * the system.
+ *
+ * If the EC is not a wake source, drain the event queue and mark them
+ * as "queued during suspend".
+ */
if (ec_dev->wake_enabled) {
disable_irq_wake(ec_dev->irq);
ec_dev->wake_enabled = 0;
+ } else {
+ cros_ec_drain_events(ec_dev);
}
return 0;
diff --git a/drivers/mfd/lp873x.c b/drivers/mfd/lp873x.c
new file mode 100644
index 000000000000..9af064c940ee
--- /dev/null
+++ b/drivers/mfd/lp873x.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Keerthy <j-keerthy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/lp873x.h>
+
+static const struct regmap_config lp873x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = LP873X_REG_MAX,
+};
+
+static const struct mfd_cell lp873x_cells[] = {
+ { .name = "lp873x-regulator", },
+ { .name = "lp873x-gpio", },
+};
+
+static int lp873x_probe(struct i2c_client *client,
+ const struct i2c_device_id *ids)
+{
+ struct lp873x *lp873;
+ int ret;
+ unsigned int otpid;
+
+ lp873 = devm_kzalloc(&client->dev, sizeof(*lp873), GFP_KERNEL);
+ if (!lp873)
+ return -ENOMEM;
+
+ lp873->dev = &client->dev;
+
+ lp873->regmap = devm_regmap_init_i2c(client, &lp873x_regmap_config);
+ if (IS_ERR(lp873->regmap)) {
+ ret = PTR_ERR(lp873->regmap);
+ dev_err(lp873->dev,
+ "Failed to initialize register map: %d\n", ret);
+ return ret;
+ }
+
+ mutex_init(&lp873->lock);
+
+ ret = regmap_read(lp873->regmap, LP873X_REG_OTP_REV, &otpid);
+ if (ret) {
+ dev_err(lp873->dev, "Failed to read OTP ID\n");
+ return ret;
+ }
+
+ lp873->rev = otpid & LP873X_OTP_REV_OTP_ID;
+
+ i2c_set_clientdata(client, lp873);
+
+ ret = mfd_add_devices(lp873->dev, PLATFORM_DEVID_AUTO, lp873x_cells,
+ ARRAY_SIZE(lp873x_cells), NULL, 0, NULL);
+
+ return ret;
+}
+
+static const struct of_device_id of_lp873x_match_table[] = {
+ { .compatible = "ti,lp8733", },
+ { .compatible = "ti,lp8732", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, of_lp873x_match_table);
+
+static const struct i2c_device_id lp873x_id_table[] = {
+ { "lp873x", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, lp873x_id_table);
+
+static struct i2c_driver lp873x_driver = {
+ .driver = {
+ .name = "lp873x",
+ .of_match_table = of_lp873x_match_table,
+ },
+ .probe = lp873x_probe,
+ .id_table = lp873x_id_table,
+};
+module_i2c_driver(lp873x_driver);
+
+MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
+MODULE_DESCRIPTION("LP873X chip family Multi-Function Device driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c
index 1b7ec0870c2a..0e3a2ea25942 100644
--- a/drivers/mfd/pm8921-core.c
+++ b/drivers/mfd/pm8921-core.c
@@ -309,6 +309,7 @@ static const struct regmap_config ssbi_regmap_config = {
};
static const struct of_device_id pm8921_id_table[] = {
+ { .compatible = "qcom,pm8018", },
{ .compatible = "qcom,pm8058", },
{ .compatible = "qcom,pm8921", },
{ }
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index 2e44323455dd..a74210df5969 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -388,11 +388,62 @@ static const struct qcom_rpm_data ipq806x_template = {
.ack_sel_size = 7,
};
+static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 26, 10, 9, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 27, 11, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 28, 12, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 29, 13, 13, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 30, 14, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 31, 15, 22, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 33, 16, 23, 3 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 36, 17, 24, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 37, 18, 25, 27 },
+ [QCOM_RPM_PM8018_SMPS1] = { 64, 19, 30, 2 },
+ [QCOM_RPM_PM8018_SMPS2] = { 66, 21, 31, 2 },
+ [QCOM_RPM_PM8018_SMPS3] = { 68, 23, 32, 2 },
+ [QCOM_RPM_PM8018_SMPS4] = { 70, 25, 33, 2 },
+ [QCOM_RPM_PM8018_SMPS5] = { 72, 27, 34, 2 },
+ [QCOM_RPM_PM8018_LDO1] = { 74, 29, 35, 2 },
+ [QCOM_RPM_PM8018_LDO2] = { 76, 31, 36, 2 },
+ [QCOM_RPM_PM8018_LDO3] = { 78, 33, 37, 2 },
+ [QCOM_RPM_PM8018_LDO4] = { 80, 35, 38, 2 },
+ [QCOM_RPM_PM8018_LDO5] = { 82, 37, 39, 2 },
+ [QCOM_RPM_PM8018_LDO6] = { 84, 39, 40, 2 },
+ [QCOM_RPM_PM8018_LDO7] = { 86, 41, 41, 2 },
+ [QCOM_RPM_PM8018_LDO8] = { 88, 43, 42, 2 },
+ [QCOM_RPM_PM8018_LDO9] = { 90, 45, 43, 2 },
+ [QCOM_RPM_PM8018_LDO10] = { 92, 47, 44, 2 },
+ [QCOM_RPM_PM8018_LDO11] = { 94, 49, 45, 2 },
+ [QCOM_RPM_PM8018_LDO12] = { 96, 51, 46, 2 },
+ [QCOM_RPM_PM8018_LDO13] = { 98, 53, 47, 2 },
+ [QCOM_RPM_PM8018_LDO14] = { 100, 55, 48, 2 },
+ [QCOM_RPM_PM8018_LVS1] = { 102, 57, 49, 1 },
+ [QCOM_RPM_PM8018_NCP] = { 103, 58, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 105, 60, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 106, 61, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 107, 62, 83, 1 },
+ [QCOM_RPM_VOLTAGE_CORNER] = { 109, 64, 87, 1 },
+};
+
+static const struct qcom_rpm_data mdm9615_template = {
+ .version = 3,
+ .resource_table = mdm9615_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
+ .req_ctx_off = 3,
+ .req_sel_off = 11,
+ .ack_ctx_off = 15,
+ .ack_sel_off = 23,
+ .req_sel_size = 4,
+ .ack_sel_size = 7,
+};
+
static const struct of_device_id qcom_rpm_of_match[] = {
{ .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
{ .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
{ .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
{ .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
+ { .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 49d7f624fc94..0f8acc5882a4 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -1,11 +1,15 @@
/*
- * MFD core driver for Rockchip RK808
+ * MFD core driver for Rockchip RK808/RK818
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
@@ -21,6 +25,7 @@
#include <linux/mfd/rk808.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/regmap.h>
struct rk808_reg_data {
@@ -57,6 +62,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
return false;
}
+static const struct regmap_config rk818_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK818_USB_CTRL_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = rk808_is_volatile_reg,
+};
+
static const struct regmap_config rk808_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -79,11 +92,21 @@ static const struct mfd_cell rk808s[] = {
{
.name = "rk808-rtc",
.num_resources = ARRAY_SIZE(rtc_resources),
- .resources = &rtc_resources[0],
+ .resources = rtc_resources,
},
};
-static const struct rk808_reg_data pre_init_reg[] = {
+static const struct mfd_cell rk818s[] = {
+ { .name = "rk808-clkout", },
+ { .name = "rk808-regulator", },
+ {
+ .name = "rk808-rtc",
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resources = rtc_resources,
+ },
+};
+
+static const struct rk808_reg_data rk808_pre_init_reg[] = {
{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
{ RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
@@ -94,6 +117,24 @@ static const struct rk808_reg_data pre_init_reg[] = {
VB_LO_SEL_3500MV },
};
+static const struct rk808_reg_data rk818_pre_init_reg[] = {
+ /* improve efficiency */
+ { RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_250MA },
+ { RK818_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_250MA },
+ { RK818_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
+ { RK818_USB_CTRL_REG, RK818_USB_ILIM_SEL_MASK,
+ RK818_USB_ILMIN_2000MA },
+ /* close charger when usb lower then 3.4V */
+ { RK818_USB_CTRL_REG, RK818_USB_CHG_SD_VSEL_MASK,
+ (0x7 << 4) },
+ /* no action when vref */
+ { RK818_H5V_EN_REG, BIT(1), RK818_REF_RDY_CTRL },
+ /* enable HDMI 5V */
+ { RK818_H5V_EN_REG, BIT(0), RK818_H5V_EN },
+ { RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT |
+ VB_LO_SEL_3500MV },
+};
+
static const struct regmap_irq rk808_irqs[] = {
/* INT_STS */
[RK808_IRQ_VOUT_LO] = {
@@ -136,6 +177,76 @@ static const struct regmap_irq rk808_irqs[] = {
},
};
+static const struct regmap_irq rk818_irqs[] = {
+ /* INT_STS */
+ [RK818_IRQ_VOUT_LO] = {
+ .mask = RK818_IRQ_VOUT_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_VB_LO] = {
+ .mask = RK818_IRQ_VB_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_PWRON] = {
+ .mask = RK818_IRQ_PWRON_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_PWRON_LP] = {
+ .mask = RK818_IRQ_PWRON_LP_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_HOTDIE] = {
+ .mask = RK818_IRQ_HOTDIE_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_RTC_ALARM] = {
+ .mask = RK818_IRQ_RTC_ALARM_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_RTC_PERIOD] = {
+ .mask = RK818_IRQ_RTC_PERIOD_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_USB_OV] = {
+ .mask = RK818_IRQ_USB_OV_MSK,
+ .reg_offset = 0,
+ },
+
+ /* INT_STS2 */
+ [RK818_IRQ_PLUG_IN] = {
+ .mask = RK818_IRQ_PLUG_IN_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_PLUG_OUT] = {
+ .mask = RK818_IRQ_PLUG_OUT_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_OK] = {
+ .mask = RK818_IRQ_CHG_OK_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_TE] = {
+ .mask = RK818_IRQ_CHG_TE_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_TS1] = {
+ .mask = RK818_IRQ_CHG_TS1_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_TS2] = {
+ .mask = RK818_IRQ_TS2_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_CVTLIM] = {
+ .mask = RK818_IRQ_CHG_CVTLIM_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_DISCHG_ILIM] = {
+ .mask = RK818_IRQ_DISCHG_ILIM_MSK,
+ .reg_offset = 1,
+ },
+};
+
static struct regmap_irq_chip rk808_irq_chip = {
.name = "rk808",
.irqs = rk808_irqs,
@@ -148,6 +259,18 @@ static struct regmap_irq_chip rk808_irq_chip = {
.init_ack_masked = true,
};
+static struct regmap_irq_chip rk818_irq_chip = {
+ .name = "rk818",
+ .irqs = rk818_irqs,
+ .num_irqs = ARRAY_SIZE(rk818_irqs),
+ .num_regs = 2,
+ .irq_reg_stride = 2,
+ .status_base = RK818_INT_STS_REG1,
+ .mask_base = RK818_INT_STS_MSK_REG1,
+ .ack_base = RK818_INT_STS_REG1,
+ .init_ack_masked = true,
+};
+
static struct i2c_client *rk808_i2c_client;
static void rk808_device_shutdown(void)
{
@@ -167,55 +290,100 @@ static void rk808_device_shutdown(void)
dev_err(&rk808_i2c_client->dev, "power off error!\n");
}
+static const struct of_device_id rk808_of_match[] = {
+ { .compatible = "rockchip,rk808" },
+ { .compatible = "rockchip,rk818" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rk808_of_match);
+
static int rk808_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device_node *np = client->dev.of_node;
struct rk808 *rk808;
+ const struct rk808_reg_data *pre_init_reg;
+ const struct mfd_cell *cells;
+ int nr_pre_init_regs;
+ int nr_cells;
int pm_off = 0;
int ret;
int i;
- if (!client->irq) {
- dev_err(&client->dev, "No interrupt support, no core IRQ\n");
- return -EINVAL;
- }
-
rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
if (!rk808)
return -ENOMEM;
- rk808->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
+ rk808->variant = i2c_smbus_read_word_data(client, RK808_ID_MSB);
+ if (rk808->variant < 0) {
+ dev_err(&client->dev, "Failed to read the chip id at 0x%02x\n",
+ RK808_ID_MSB);
+ return rk808->variant;
+ }
+
+ dev_dbg(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
+
+ switch (rk808->variant) {
+ case RK808_ID:
+ rk808->regmap_cfg = &rk808_regmap_config;
+ rk808->regmap_irq_chip = &rk808_irq_chip;
+ pre_init_reg = rk808_pre_init_reg;
+ nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
+ cells = rk808s;
+ nr_cells = ARRAY_SIZE(rk808s);
+ break;
+ case RK818_ID:
+ rk808->regmap_cfg = &rk818_regmap_config;
+ rk808->regmap_irq_chip = &rk818_irq_chip;
+ pre_init_reg = rk818_pre_init_reg;
+ nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
+ cells = rk818s;
+ nr_cells = ARRAY_SIZE(rk818s);
+ break;
+ default:
+ dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
+ rk808->variant);
+ return -EINVAL;
+ }
+
+ rk808->i2c = client;
+ i2c_set_clientdata(client, rk808);
+
+ rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg);
if (IS_ERR(rk808->regmap)) {
dev_err(&client->dev, "regmap initialization failed\n");
return PTR_ERR(rk808->regmap);
}
- for (i = 0; i < ARRAY_SIZE(pre_init_reg); i++) {
- ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr,
- pre_init_reg[i].mask,
- pre_init_reg[i].value);
- if (ret) {
- dev_err(&client->dev,
- "0x%x write err\n", pre_init_reg[i].addr);
- return ret;
- }
+ if (!client->irq) {
+ dev_err(&client->dev, "No interrupt support, no core IRQ\n");
+ return -EINVAL;
}
ret = regmap_add_irq_chip(rk808->regmap, client->irq,
IRQF_ONESHOT, -1,
- &rk808_irq_chip, &rk808->irq_data);
+ rk808->regmap_irq_chip, &rk808->irq_data);
if (ret) {
dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
return ret;
}
- rk808->i2c = client;
- i2c_set_clientdata(client, rk808);
+ for (i = 0; i < nr_pre_init_regs; i++) {
+ ret = regmap_update_bits(rk808->regmap,
+ pre_init_reg[i].addr,
+ pre_init_reg[i].mask,
+ pre_init_reg[i].value);
+ if (ret) {
+ dev_err(&client->dev,
+ "0x%x write err\n",
+ pre_init_reg[i].addr);
+ return ret;
+ }
+ }
- ret = devm_mfd_add_devices(&client->dev, -1,
- rk808s, ARRAY_SIZE(rk808s), NULL, 0,
- regmap_irq_get_domain(rk808->irq_data));
+ ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+ cells, nr_cells, NULL, 0,
+ regmap_irq_get_domain(rk808->irq_data));
if (ret) {
dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
goto err_irq;
@@ -245,14 +413,9 @@ static int rk808_remove(struct i2c_client *client)
return 0;
}
-static const struct of_device_id rk808_of_match[] = {
- { .compatible = "rockchip,rk808" },
- { },
-};
-MODULE_DEVICE_TABLE(of, rk808_of_match);
-
static const struct i2c_device_id rk808_ids[] = {
{ "rk808" },
+ { "rk818" },
{ },
};
MODULE_DEVICE_TABLE(i2c, rk808_ids);
@@ -272,4 +435,5 @@ module_i2c_driver(rk808_i2c_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
-MODULE_DESCRIPTION("RK808 PMIC driver");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
+MODULE_DESCRIPTION("RK808/RK818 PMIC driver");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 20:38:31 +0000