diff options
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_common.h')
| -rw-r--r-- | drivers/infiniband/hw/qib/qib_common.h | 758 |
1 files changed, 758 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_common.h b/drivers/infiniband/hw/qib/qib_common.h new file mode 100644 index 000000000000..b3955ed8f794 --- /dev/null +++ b/drivers/infiniband/hw/qib/qib_common.h @@ -0,0 +1,758 @@ +/* + * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation. + * All rights reserved. + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef _QIB_COMMON_H +#define _QIB_COMMON_H + +/* + * This file contains defines, structures, etc. that are used + * to communicate between kernel and user code. + */ + +/* This is the IEEE-assigned OUI for QLogic Inc. QLogic_IB */ +#define QIB_SRC_OUI_1 0x00 +#define QIB_SRC_OUI_2 0x11 +#define QIB_SRC_OUI_3 0x75 + +/* version of protocol header (known to chip also). In the long run, + * we should be able to generate and accept a range of version numbers; + * for now we only accept one, and it's compiled in. + */ +#define IPS_PROTO_VERSION 2 + +/* + * These are compile time constants that you may want to enable or disable + * if you are trying to debug problems with code or performance. + * QIB_VERBOSE_TRACING define as 1 if you want additional tracing in + * fastpath code + * QIB_TRACE_REGWRITES define as 1 if you want register writes to be + * traced in faspath code + * _QIB_TRACING define as 0 if you want to remove all tracing in a + * compilation unit + */ + +/* + * The value in the BTH QP field that QLogic_IB uses to differentiate + * an qlogic_ib protocol IB packet vs standard IB transport + * This it needs to be even (0x656b78), because the LSB is sometimes + * used for the MSB of context. The change may cause a problem + * interoperating with older software. + */ +#define QIB_KD_QP 0x656b78 + +/* + * These are the status bits readable (in ascii form, 64bit value) + * from the "status" sysfs file. For binary compatibility, values + * must remain as is; removed states can be reused for different + * purposes. + */ +#define QIB_STATUS_INITTED 0x1 /* basic initialization done */ +/* Chip has been found and initted */ +#define QIB_STATUS_CHIP_PRESENT 0x20 +/* IB link is at ACTIVE, usable for data traffic */ +#define QIB_STATUS_IB_READY 0x40 +/* link is configured, LID, MTU, etc. have been set */ +#define QIB_STATUS_IB_CONF 0x80 +/* A Fatal hardware error has occurred. */ +#define QIB_STATUS_HWERROR 0x200 + +/* + * The list of usermode accessible registers. Also see Reg_* later in file. + */ +enum qib_ureg { + /* (RO) DMA RcvHdr to be used next. */ + ur_rcvhdrtail = 0, + /* (RW) RcvHdr entry to be processed next by host. */ + ur_rcvhdrhead = 1, + /* (RO) Index of next Eager index to use. */ + ur_rcvegrindextail = 2, + /* (RW) Eager TID to be processed next */ + ur_rcvegrindexhead = 3, + /* For internal use only; max register number. */ + _QIB_UregMax +}; + +/* bit values for spi_runtime_flags */ +#define QIB_RUNTIME_PCIE 0x0002 +#define QIB_RUNTIME_FORCE_WC_ORDER 0x0004 +#define QIB_RUNTIME_RCVHDR_COPY 0x0008 +#define QIB_RUNTIME_MASTER 0x0010 +#define QIB_RUNTIME_RCHK 0x0020 +#define QIB_RUNTIME_NODMA_RTAIL 0x0080 +#define QIB_RUNTIME_SPECIAL_TRIGGER 0x0100 +#define QIB_RUNTIME_SDMA 0x0200 +#define QIB_RUNTIME_FORCE_PIOAVAIL 0x0400 +#define QIB_RUNTIME_PIO_REGSWAPPED 0x0800 +#define QIB_RUNTIME_CTXT_MSB_IN_QP 0x1000 +#define QIB_RUNTIME_CTXT_REDIRECT 0x2000 +#define QIB_RUNTIME_HDRSUPP 0x4000 + +/* + * This structure is returned by qib_userinit() immediately after + * open to get implementation-specific info, and info specific to this + * instance. + * + * This struct must have explict pad fields where type sizes + * may result in different alignments between 32 and 64 bit + * programs, since the 64 bit * bit kernel requires the user code + * to have matching offsets + */ +struct qib_base_info { + /* version of hardware, for feature checking. */ + __u32 spi_hw_version; + /* version of software, for feature checking. */ + __u32 spi_sw_version; + /* QLogic_IB context assigned, goes into sent packets */ + __u16 spi_ctxt; + __u16 spi_subctxt; + /* + * IB MTU, packets IB data must be less than this. + * The MTU is in bytes, and will be a multiple of 4 bytes. + */ + __u32 spi_mtu; + /* + * Size of a PIO buffer. Any given packet's total size must be less + * than this (in words). Included is the starting control word, so + * if 513 is returned, then total pkt size is 512 words or less. + */ + __u32 spi_piosize; + /* size of the TID cache in qlogic_ib, in entries */ + __u32 spi_tidcnt; + /* size of the TID Eager list in qlogic_ib, in entries */ + __u32 spi_tidegrcnt; + /* size of a single receive header queue entry in words. */ + __u32 spi_rcvhdrent_size; + /* + * Count of receive header queue entries allocated. + * This may be less than the spu_rcvhdrcnt passed in!. + */ + __u32 spi_rcvhdr_cnt; + + /* per-chip and other runtime features bitmap (QIB_RUNTIME_*) */ + __u32 spi_runtime_flags; + + /* address where hardware receive header queue is mapped */ + __u64 spi_rcvhdr_base; + + /* user program. */ + + /* base address of eager TID receive buffers used by hardware. */ + __u64 spi_rcv_egrbufs; + + /* Allocated by initialization code, not by protocol. */ + + /* + * Size of each TID buffer in host memory, starting at + * spi_rcv_egrbufs. The buffers are virtually contiguous. + */ + __u32 spi_rcv_egrbufsize; + /* + * The special QP (queue pair) value that identifies an qlogic_ib + * protocol packet from standard IB packets. More, probably much + * more, to be added. + */ + __u32 spi_qpair; + + /* + * User register base for init code, not to be used directly by + * protocol or applications. Always points to chip registers, + * for normal or shared context. + */ + __u64 spi_uregbase; + /* + * Maximum buffer size in bytes that can be used in a single TID + * entry (assuming the buffer is aligned to this boundary). This is + * the minimum of what the hardware and software support Guaranteed + * to be a power of 2. + */ + __u32 spi_tid_maxsize; + /* + * alignment of each pio send buffer (byte count + * to add to spi_piobufbase to get to second buffer) + */ + __u32 spi_pioalign; + /* + * The index of the first pio buffer available to this process; + * needed to do lookup in spi_pioavailaddr; not added to + * spi_piobufbase. + */ + __u32 spi_pioindex; + /* number of buffers mapped for this process */ + __u32 spi_piocnt; + + /* + * Base address of writeonly pio buffers for this process. + * Each buffer has spi_piosize words, and is aligned on spi_pioalign + * boundaries. spi_piocnt buffers are mapped from this address + */ + __u64 spi_piobufbase; + + /* + * Base address of readonly memory copy of the pioavail registers. + * There are 2 bits for each buffer. + */ + __u64 spi_pioavailaddr; + + /* + * Address where driver updates a copy of the interface and driver + * status (QIB_STATUS_*) as a 64 bit value. It's followed by a + * link status qword (formerly combined with driver status), then a + * string indicating hardware error, if there was one. + */ + __u64 spi_status; + + /* number of chip ctxts available to user processes */ + __u32 spi_nctxts; + __u16 spi_unit; /* unit number of chip we are using */ + __u16 spi_port; /* IB port number we are using */ + /* num bufs in each contiguous set */ + __u32 spi_rcv_egrperchunk; + /* size in bytes of each contiguous set */ + __u32 spi_rcv_egrchunksize; + /* total size of mmap to cover full rcvegrbuffers */ + __u32 spi_rcv_egrbuftotlen; + __u32 spi_rhf_offset; /* dword offset in hdrqent for rcvhdr flags */ + /* address of readonly memory copy of the rcvhdrq tail register. */ + __u64 spi_rcvhdr_tailaddr; + + /* + * shared memory pages for subctxts if ctxt is shared; these cover + * all the processes in the group sharing a single context. + * all have enough space for the num_subcontexts value on this job. + */ + __u64 spi_subctxt_uregbase; + __u64 spi_subctxt_rcvegrbuf; + __u64 spi_subctxt_rcvhdr_base; + + /* shared memory page for send buffer disarm status */ + __u64 spi_sendbuf_status; +} __attribute__ ((aligned(8))); + +/* + * This version number is given to the driver by the user code during + * initialization in the spu_userversion field of qib_user_info, so + * the driver can check for compatibility with user code. + * + * The major version changes when data structures + * change in an incompatible way. The driver must be the same or higher + * for initialization to succeed. In some cases, a higher version + * driver will not interoperate with older software, and initialization + * will return an error. + */ +#define QIB_USER_SWMAJOR 1 + +/* + * Minor version differences are always compatible + * a within a major version, however if user software is larger + * than driver software, some new features and/or structure fields + * may not be implemented; the user code must deal with this if it + * cares, or it must abort after initialization reports the difference. + */ +#define QIB_USER_SWMINOR 10 + +#define QIB_USER_SWVERSION ((QIB_USER_SWMAJOR << 16) | QIB_USER_SWMINOR) + +#ifndef QIB_KERN_TYPE +#define QIB_KERN_TYPE 0 +#define QIB_IDSTR "QLogic kernel.org driver" +#endif + +/* + * Similarly, this is the kernel version going back to the user. It's + * slightly different, in that we want to tell if the driver was built as + * part of a QLogic release, or from the driver from openfabrics.org, + * kernel.org, or a standard distribution, for support reasons. + * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied. + * + * It's returned by the driver to the user code during initialization in the + * spi_sw_version field of qib_base_info, so the user code can in turn + * check for compatibility with the kernel. +*/ +#define QIB_KERN_SWVERSION ((QIB_KERN_TYPE << 31) | QIB_USER_SWVERSION) + +/* + * This structure is passed to qib_userinit() to tell the driver where + * user code buffers are, sizes, etc. The offsets and sizes of the + * fields must remain unchanged, for binary compatibility. It can + * be extended, if userversion is changed so user code can tell, if needed + */ +struct qib_user_info { + /* + * version of user software, to detect compatibility issues. + * Should be set to QIB_USER_SWVERSION. + */ + __u32 spu_userversion; + + __u32 _spu_unused2; + + /* size of struct base_info to write to */ + __u32 spu_base_info_size; + + __u32 _spu_unused3; + + /* + * If two or more processes wish to share a context, each process + * must set the spu_subctxt_cnt and spu_subctxt_id to the same + * values. The only restriction on the spu_subctxt_id is that + * it be unique for a given node. + */ + __u16 spu_subctxt_cnt; + __u16 spu_subctxt_id; + + __u32 spu_port; /* IB port requested by user if > 0 */ + + /* + * address of struct base_info to write to + */ + __u64 spu_base_info; + +} __attribute__ ((aligned(8))); + +/* User commands. */ + +/* 16 available, was: old set up userspace (for old user code) */ +#define QIB_CMD_CTXT_INFO 17 /* find out what resources we got */ +#define QIB_CMD_RECV_CTRL 18 /* control receipt of packets */ +#define QIB_CMD_TID_UPDATE 19 /* update expected TID entries */ +#define QIB_CMD_TID_FREE 20 /* free expected TID entries */ +#define QIB_CMD_SET_PART_KEY 21 /* add partition key */ +/* 22 available, was: return info on slave processes (for old user code) */ +#define QIB_CMD_ASSIGN_CTXT 23 /* allocate HCA and ctxt */ +#define QIB_CMD_USER_INIT 24 /* set up userspace */ +#define QIB_CMD_UNUSED_1 25 +#define QIB_CMD_UNUSED_2 26 +#define QIB_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */ +#define QIB_CMD_POLL_TYPE 28 /* set the kind of polling we want */ +#define QIB_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */ +/* 30 is unused */ +#define QIB_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */ +#define QIB_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */ +/* 33 available, was a testing feature */ +#define QIB_CMD_DISARM_BUFS 34 /* disarm send buffers w/ errors */ +#define QIB_CMD_ACK_EVENT 35 /* ack & clear bits */ +#define QIB_CMD_CPUS_LIST 36 /* list of cpus allocated, for pinned + * processes: qib_cpus_list */ + +/* + * QIB_CMD_ACK_EVENT obsoletes QIB_CMD_DISARM_BUFS, but we keep it for + * compatibility with libraries from previous release. The ACK_EVENT + * will take appropriate driver action (if any, just DISARM for now), + * then clear the bits passed in as part of the mask. These bits are + * in the first 64bit word at spi_sendbuf_status, and are passed to + * the driver in the event_mask union as well. + */ +#define _QIB_EVENT_DISARM_BUFS_BIT 0 +#define _QIB_EVENT_LINKDOWN_BIT 1 +#define _QIB_EVENT_LID_CHANGE_BIT 2 +#define _QIB_EVENT_LMC_CHANGE_BIT 3 +#define _QIB_EVENT_SL2VL_CHANGE_BIT 4 +#define _QIB_MAX_EVENT_BIT _QIB_EVENT_SL2VL_CHANGE_BIT + +#define QIB_EVENT_DISARM_BUFS_BIT (1UL << _QIB_EVENT_DISARM_BUFS_BIT) +#define QIB_EVENT_LINKDOWN_BIT (1UL << _QIB_EVENT_LINKDOWN_BIT) +#define QIB_EVENT_LID_CHANGE_BIT (1UL << _QIB_EVENT_LID_CHANGE_BIT) +#define QIB_EVENT_LMC_CHANGE_BIT (1UL << _QIB_EVENT_LMC_CHANGE_BIT) +#define QIB_EVENT_SL2VL_CHANGE_BIT (1UL << _QIB_EVENT_SL2VL_CHANGE_BIT) + + +/* + * Poll types + */ +#define QIB_POLL_TYPE_ANYRCV 0x0 +#define QIB_POLL_TYPE_URGENT 0x1 + +struct qib_ctxt_info { + __u16 num_active; /* number of active units */ + __u16 unit; /* unit (chip) assigned to caller */ + __u16 port; /* IB port assigned to caller (1-based) */ + __u16 ctxt; /* ctxt on unit assigned to caller */ + __u16 subctxt; /* subctxt on unit assigned to caller */ + __u16 num_ctxts; /* number of ctxts available on unit */ + __u16 num_subctxts; /* number of subctxts opened on ctxt */ + __u16 rec_cpu; /* cpu # for affinity (ffff if none) */ +}; + +struct qib_tid_info { + __u32 tidcnt; + /* make structure same size in 32 and 64 bit */ + __u32 tid__unused; + /* virtual address of first page in transfer */ + __u64 tidvaddr; + /* pointer (same size 32/64 bit) to __u16 tid array */ + __u64 tidlist; + + /* + * pointer (same size 32/64 bit) to bitmap of TIDs used + * for this call; checked for being large enough at open + */ + __u64 tidmap; +}; + +struct qib_cmd { + __u32 type; /* command type */ + union { + struct qib_tid_info tid_info; + struct qib_user_info user_info; + + /* + * address in userspace where we should put the sdma + * inflight counter + */ + __u64 sdma_inflight; + /* + * address in userspace where we should put the sdma + * completion counter + */ + __u64 sdma_complete; + /* address in userspace of struct qib_ctxt_info to + write result to */ + __u64 ctxt_info; + /* enable/disable receipt of packets */ + __u32 recv_ctrl; + /* enable/disable armlaunch errors (non-zero to enable) */ + __u32 armlaunch_ctrl; + /* partition key to set */ + __u16 part_key; + /* user address of __u32 bitmask of active slaves */ + __u64 slave_mask_addr; + /* type of polling we want */ + __u16 poll_type; + /* back pressure enable bit for one particular context */ + __u8 ctxt_bp; + /* qib_user_event_ack(), IPATH_EVENT_* bits */ + __u64 event_mask; + } cmd; +}; + +struct qib_iovec { + /* Pointer to data, but same size 32 and 64 bit */ + __u64 iov_base; + + /* + * Length of data; don't need 64 bits, but want + * qib_sendpkt to remain same size as before 32 bit changes, so... + */ + __u64 iov_len; +}; + +/* + * Describes a single packet for send. Each packet can have one or more + * buffers, but the total length (exclusive of IB headers) must be less + * than the MTU, and if using the PIO method, entire packet length, + * including IB headers, must be less than the qib_piosize value (words). + * Use of this necessitates including sys/uio.h + */ +struct __qib_sendpkt { + __u32 sps_flags; /* flags for packet (TBD) */ + __u32 sps_cnt; /* number of entries to use in sps_iov */ + /* array of iov's describing packet. TEMPORARY */ + struct qib_iovec sps_iov[4]; +}; + +/* + * Diagnostics can send a packet by "writing" the following + * structs to the diag data special file. + * This allows a custom + * pbc (+ static rate) qword, so that special modes and deliberate + * changes to CRCs can be used. The elements were also re-ordered + * for better alignment and to avoid padding issues. + */ +#define _DIAG_XPKT_VERS 3 +struct qib_diag_xpkt { + __u16 version; + __u16 unit; + __u16 port; + __u16 len; + __u64 data; + __u64 pbc_wd; +}; + +/* + * Data layout in I2C flash (for GUID, etc.) + * All fields are little-endian binary unless otherwise stated + */ +#define QIB_FLASH_VERSION 2 +struct qib_flash { + /* flash layout version (QIB_FLASH_VERSION) */ + __u8 if_fversion; + /* checksum protecting if_length bytes */ + __u8 if_csum; + /* + * valid length (in use, protected by if_csum), including + * if_fversion and if_csum themselves) + */ + __u8 if_length; + /* the GUID, in network order */ + __u8 if_guid[8]; + /* number of GUIDs to use, starting from if_guid */ + __u8 if_numguid; + /* the (last 10 characters of) board serial number, in ASCII */ + char if_serial[12]; + /* board mfg date (YYYYMMDD ASCII) */ + char if_mfgdate[8]; + /* last board rework/test date (YYYYMMDD ASCII) */ + char if_testdate[8]; + /* logging of error counts, TBD */ + __u8 if_errcntp[4]; + /* powered on hours, updated at driver unload */ + __u8 if_powerhour[2]; + /* ASCII free-form comment field */ + char if_comment[32]; + /* Backwards compatible prefix for longer QLogic Serial Numbers */ + char if_sprefix[4]; + /* 82 bytes used, min flash size is 128 bytes */ + __u8 if_future[46]; +}; + +/* + * These are the counters implemented in the chip, and are listed in order. + * The InterCaps naming is taken straight from the chip spec. + */ +struct qlogic_ib_counters { + __u64 LBIntCnt; + __u64 LBFlowStallCnt; + __u64 TxSDmaDescCnt; /* was Reserved1 */ + __u64 TxUnsupVLErrCnt; + __u64 TxDataPktCnt; + __u64 TxFlowPktCnt; + __u64 TxDwordCnt; + __u64 TxLenErrCnt; + __u64 TxMaxMinLenErrCnt; + __u64 TxUnderrunCnt; + __u64 TxFlowStallCnt; + __u64 TxDroppedPktCnt; + __u64 RxDroppedPktCnt; + __u64 RxDataPktCnt; + __u64 RxFlowPktCnt; + __u64 RxDwordCnt; + __u64 RxLenErrCnt; + __u64 RxMaxMinLenErrCnt; + __u64 RxICRCErrCnt; + __u64 RxVCRCErrCnt; + __u64 RxFlowCtrlErrCnt; + __u64 RxBadFormatCnt; + __u64 RxLinkProblemCnt; + __u64 RxEBPCnt; + __u64 RxLPCRCErrCnt; + __u64 RxBufOvflCnt; + __u64 RxTIDFullErrCnt; + __u64 RxTIDValidErrCnt; + __u64 RxPKeyMismatchCnt; + __u64 RxP0HdrEgrOvflCnt; + __u64 RxP1HdrEgrOvflCnt; + __u64 RxP2HdrEgrOvflCnt; + __u64 RxP3HdrEgrOvflCnt; + __u64 RxP4HdrEgrOvflCnt; + __u64 RxP5HdrEgrOvflCnt; + __u64 RxP6HdrEgrOvflCnt; + __u64 RxP7HdrEgrOvflCnt; + __u64 RxP8HdrEgrOvflCnt; + __u64 RxP9HdrEgrOvflCnt; + __u64 RxP10HdrEgrOvflCnt; + __u64 RxP11HdrEgrOvflCnt; + __u64 RxP12HdrEgrOvflCnt; + __u64 RxP13HdrEgrOvflCnt; + __u64 RxP14HdrEgrOvflCnt; + __u64 RxP15HdrEgrOvflCnt; + __u64 RxP16HdrEgrOvflCnt; + __u64 IBStatusChangeCnt; + __u64 IBLinkErrRecoveryCnt; + __u64 IBLinkDownedCnt; + __u64 IBSymbolErrCnt; + __u64 RxVL15DroppedPktCnt; + __u64 RxOtherLocalPhyErrCnt; + __u64 PcieRetryBufDiagQwordCnt; + __u64 ExcessBufferOvflCnt; + __u64 LocalLinkIntegrityErrCnt; + __u64 RxVlErrCnt; + __u64 RxDlidFltrCnt; +}; + +/* + * The next set of defines are for packet headers, and chip register + * and memory bits that are visible to and/or used by user-mode software. + */ + +/* RcvHdrFlags bits */ +#define QLOGIC_IB_RHF_LENGTH_MASK 0x7FF +#define QLOGIC_IB_RHF_LENGTH_SHIFT 0 +#define QLOGIC_IB_RHF_RCVTYPE_MASK 0x7 +#define QLOGIC_IB_RHF_RCVTYPE_SHIFT 11 +#define QLOGIC_IB_RHF_EGRINDEX_MASK 0xFFF +#define QLOGIC_IB_RHF_EGRINDEX_SHIFT 16 +#define QLOGIC_IB_RHF_SEQ_MASK 0xF +#define QLOGIC_IB_RHF_SEQ_SHIFT 0 +#define QLOGIC_IB_RHF_HDRQ_OFFSET_MASK 0x7FF +#define QLOGIC_IB_RHF_HDRQ_OFFSET_SHIFT 4 +#define QLOGIC_IB_RHF_H_ICRCERR 0x80000000 +#define QLOGIC_IB_RHF_H_VCRCERR 0x40000000 +#define QLOGIC_IB_RHF_H_PARITYERR 0x20000000 +#define QLOGIC_IB_RHF_H_LENERR 0x10000000 +#define QLOGIC_IB_RHF_H_MTUERR 0x08000000 +#define QLOGIC_IB_RHF_H_IHDRERR 0x04000000 +#define QLOGIC_IB_RHF_H_TIDERR 0x02000000 +#define QLOGIC_IB_RHF_H_MKERR 0x01000000 +#define QLOGIC_IB_RHF_H_IBERR 0x00800000 +#define QLOGIC_IB_RHF_H_ERR_MASK 0xFF800000 +#define QLOGIC_IB_RHF_L_USE_EGR 0x80000000 +#define QLOGIC_IB_RHF_L_SWA 0x00008000 +#define QLOGIC_IB_RHF_L_SWB 0x00004000 + +/* qlogic_ib header fields */ +#define QLOGIC_IB_I_VERS_MASK 0xF +#define QLOGIC_IB_I_VERS_SHIFT 28 +#define QLOGIC_IB_I_CTXT_MASK 0xF +#define QLOGIC_IB_I_CTXT_SHIFT 24 +#define QLOGIC_IB_I_TID_MASK 0x7FF +#define QLOGIC_IB_I_TID_SHIFT 13 +#define QLOGIC_IB_I_OFFSET_MASK 0x1FFF +#define QLOGIC_IB_I_OFFSET_SHIFT 0 + +/* K_PktFlags bits */ +#define QLOGIC_IB_KPF_INTR 0x1 +#define QLOGIC_IB_KPF_SUBCTXT_MASK 0x3 +#define QLOGIC_IB_KPF_SUBCTXT_SHIFT 1 + +#define QLOGIC_IB_MAX_SUBCTXT 4 + +/* SendPIO per-buffer control */ +#define QLOGIC_IB_SP_TEST 0x40 +#define QLOGIC_IB_SP_TESTEBP 0x20 +#define QLOGIC_IB_SP_TRIGGER_SHIFT 15 + +/* SendPIOAvail bits */ +#define QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT 1 +#define QLOGIC_IB_SENDPIOAVAIL_CHECK_SHIFT 0 + +/* qlogic_ib header format */ +struct qib_header { + /* + * Version - 4 bits, Context - 4 bits, TID - 10 bits and Offset - + * 14 bits before ECO change ~28 Dec 03. After that, Vers 4, + * Context 4, TID 11, offset 13. + */ + __le32 ver_ctxt_tid_offset; + __le16 chksum; + __le16 pkt_flags; +}; + +/* + * qlogic_ib user message header format. + * This structure contains the first 4 fields common to all protocols + * that employ qlogic_ib. + */ +struct qib_message_header { + __be16 lrh[4]; + __be32 bth[3]; + /* fields below this point are in host byte order */ + struct qib_header iph; + __u8 sub_opcode; +}; + +/* IB - LRH header consts */ +#define QIB_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */ +#define QIB_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */ + +/* misc. */ +#define SIZE_OF_CRC 1 + +#define QIB_DEFAULT_P_KEY 0xFFFF +#define QIB_PERMISSIVE_LID 0xFFFF +#define QIB_AETH_CREDIT_SHIFT 24 +#define QIB_AETH_CREDIT_MASK 0x1F +#define QIB_AETH_CREDIT_INVAL 0x1F +#define QIB_PSN_MASK 0xFFFFFF +#define QIB_MSN_MASK 0xFFFFFF +#define QIB_QPN_MASK 0xFFFFFF +#define QIB_MULTICAST_LID_BASE 0xC000 +#define QIB_EAGER_TID_ID QLOGIC_IB_I_TID_MASK +#define QIB_MULTICAST_QPN 0xFFFFFF + +/* Receive Header Queue: receive type (from qlogic_ib) */ +#define RCVHQ_RCV_TYPE_EXPECTED 0 +#define RCVHQ_RCV_TYPE_EAGER 1 +#define RCVHQ_RCV_TYPE_NON_KD 2 +#define RCVHQ_RCV_TYPE_ERROR 3 + +#define QIB_HEADER_QUEUE_WORDS 9 + +/* functions for extracting fields from rcvhdrq entries for the driver. + */ +static inline __u32 qib_hdrget_err_flags(const __le32 *rbuf) +{ + return __le32_to_cpu(rbuf[1]) & QLOGIC_IB_RHF_H_ERR_MASK; +} + +static inline __u32 qib_hdrget_rcv_type(const __le32 *rbuf) +{ + return (__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_RCVTYPE_SHIFT) & + QLOGIC_IB_RHF_RCVTYPE_MASK; +} + +static inline __u32 qib_hdrget_length_in_bytes(const __le32 *rbuf) +{ + return ((__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_LENGTH_SHIFT) & + QLOGIC_IB_RHF_LENGTH_MASK) << 2; +} + +static inline __u32 qib_hdrget_index(const __le32 *rbuf) +{ + return (__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_EGRINDEX_SHIFT) & + QLOGIC_IB_RHF_EGRINDEX_MASK; +} + +static inline __u32 qib_hdrget_seq(const __le32 *rbuf) +{ + return (__le32_to_cpu(rbuf[1]) >> QLOGIC_IB_RHF_SEQ_SHIFT) & + QLOGIC_IB_RHF_SEQ_MASK; +} + +static inline __u32 qib_hdrget_offset(const __le32 *rbuf) +{ + return (__le32_to_cpu(rbuf[1]) >> QLOGIC_IB_RHF_HDRQ_OFFSET_SHIFT) & + QLOGIC_IB_RHF_HDRQ_OFFSET_MASK; +} + +static inline __u32 qib_hdrget_use_egr_buf(const __le32 *rbuf) +{ + return __le32_to_cpu(rbuf[0]) & QLOGIC_IB_RHF_L_USE_EGR; +} + +static inline __u32 qib_hdrget_qib_ver(__le32 hdrword) +{ + return (__le32_to_cpu(hdrword) >> QLOGIC_IB_I_VERS_SHIFT) & + QLOGIC_IB_I_VERS_MASK; +} + +#endif /* _QIB_COMMON_H */ |