summaryrefslogtreecommitdiff
path: root/drivers/iio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/accel/Kconfig2
-rw-r--r--drivers/iio/adc/ad4130.c12
-rw-r--r--drivers/iio/adc/ad7091r8.c2
-rw-r--r--drivers/iio/humidity/Kconfig12
-rw-r--r--drivers/iio/humidity/Makefile1
-rw-r--r--drivers/iio/humidity/hdc3020.c2
-rw-r--r--drivers/iio/imu/bno055/Kconfig1
-rw-r--r--drivers/iio/industrialio-core.c5
-rw-r--r--drivers/iio/light/hid-sensor-als.c1
-rw-r--r--drivers/iio/magnetometer/rm3100-core.c10
-rw-r--r--drivers/iio/pressure/bmp280-spi.c1
11 files changed, 40 insertions, 9 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 91adcac875a4..c9d7afe489e8 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -219,10 +219,12 @@ config BMA400
config BMA400_I2C
tristate
+ select REGMAP_I2C
depends on BMA400
config BMA400_SPI
tristate
+ select REGMAP_SPI
depends on BMA400
config BMC150_ACCEL
diff --git a/drivers/iio/adc/ad4130.c b/drivers/iio/adc/ad4130.c
index feb86fe6c422..62490424b6ae 100644
--- a/drivers/iio/adc/ad4130.c
+++ b/drivers/iio/adc/ad4130.c
@@ -1821,7 +1821,7 @@ static int ad4130_setup_int_clk(struct ad4130_state *st)
{
struct device *dev = &st->spi->dev;
struct device_node *of_node = dev_of_node(dev);
- struct clk_init_data init;
+ struct clk_init_data init = {};
const char *clk_name;
int ret;
@@ -1891,10 +1891,14 @@ static int ad4130_setup(struct iio_dev *indio_dev)
return ret;
/*
- * Configure all GPIOs for output. If configured, the interrupt function
- * of P2 takes priority over the GPIO out function.
+ * Configure unused GPIOs for output. If configured, the interrupt
+ * function of P2 takes priority over the GPIO out function.
*/
- val = AD4130_IO_CONTROL_GPIO_CTRL_MASK;
+ val = 0;
+ for (i = 0; i < AD4130_MAX_GPIOS; i++)
+ if (st->pins_fn[i + AD4130_AIN2_P1] == AD4130_PIN_FN_NONE)
+ val |= FIELD_PREP(AD4130_IO_CONTROL_GPIO_CTRL_MASK, BIT(i));
+
val |= FIELD_PREP(AD4130_IO_CONTROL_INT_PIN_SEL_MASK, st->int_pin_sel);
ret = regmap_write(st->regmap, AD4130_IO_CONTROL_REG, val);
diff --git a/drivers/iio/adc/ad7091r8.c b/drivers/iio/adc/ad7091r8.c
index 57700f124803..700564305057 100644
--- a/drivers/iio/adc/ad7091r8.c
+++ b/drivers/iio/adc/ad7091r8.c
@@ -195,7 +195,7 @@ static int ad7091r8_gpio_setup(struct ad7091r_state *st)
st->reset_gpio = devm_gpiod_get_optional(st->dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(st->reset_gpio))
- return dev_err_probe(st->dev, PTR_ERR(st->convst_gpio),
+ return dev_err_probe(st->dev, PTR_ERR(st->reset_gpio),
"Error on requesting reset GPIO\n");
if (st->reset_gpio) {
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index 2de5494e7c22..b15b7a3b66d5 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -48,6 +48,18 @@ config HDC2010
To compile this driver as a module, choose M here: the module
will be called hdc2010.
+config HDC3020
+ tristate "TI HDC3020 relative humidity and temperature sensor"
+ depends on I2C
+ select CRC8
+ help
+ Say yes here to build support for the Texas Instruments
+ HDC3020, HDC3021 and HDC3022 relative humidity and temperature
+ sensors.
+
+ To compile this driver as a module, choose M here: the module
+ will be called hdc3020.
+
config HID_SENSOR_HUMIDITY
tristate "HID Environmental humidity sensor"
depends on HID_SENSOR_HUB
diff --git a/drivers/iio/humidity/Makefile b/drivers/iio/humidity/Makefile
index f19ff3de97c5..5fbeef299f61 100644
--- a/drivers/iio/humidity/Makefile
+++ b/drivers/iio/humidity/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_AM2315) += am2315.o
obj-$(CONFIG_DHT11) += dht11.o
obj-$(CONFIG_HDC100X) += hdc100x.o
obj-$(CONFIG_HDC2010) += hdc2010.o
+obj-$(CONFIG_HDC3020) += hdc3020.o
obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o
hts221-y := hts221_core.o \
diff --git a/drivers/iio/humidity/hdc3020.c b/drivers/iio/humidity/hdc3020.c
index 4e3311170725..ed70415512f6 100644
--- a/drivers/iio/humidity/hdc3020.c
+++ b/drivers/iio/humidity/hdc3020.c
@@ -322,7 +322,7 @@ static int hdc3020_read_raw(struct iio_dev *indio_dev,
if (chan->type != IIO_TEMP)
return -EINVAL;
- *val = 16852;
+ *val = -16852;
return IIO_VAL_INT;
default:
diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
index 83e53acfbe88..c7f5866a177d 100644
--- a/drivers/iio/imu/bno055/Kconfig
+++ b/drivers/iio/imu/bno055/Kconfig
@@ -8,6 +8,7 @@ config BOSCH_BNO055
config BOSCH_BNO055_SERIAL
tristate "Bosch BNO055 attached via UART"
depends on SERIAL_DEV_BUS
+ select REGMAP
select BOSCH_BNO055
help
Enable this to support Bosch BNO055 IMUs attached via UART.
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 9a85752124dd..173dc00762a1 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -1584,10 +1584,13 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev)
ret = iio_device_register_sysfs_group(indio_dev,
&iio_dev_opaque->chan_attr_group);
if (ret)
- goto error_clear_attrs;
+ goto error_free_chan_attrs;
return 0;
+error_free_chan_attrs:
+ kfree(iio_dev_opaque->chan_attr_group.attrs);
+ iio_dev_opaque->chan_attr_group.attrs = NULL;
error_clear_attrs:
iio_free_chan_devattr_list(&iio_dev_opaque->channel_attr_list);
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index 5cd27f04b45e..b6c4bef2a7bb 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -226,6 +226,7 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev,
case HID_USAGE_SENSOR_TIME_TIMESTAMP:
als_state->timestamp = hid_sensor_convert_timestamp(&als_state->common_attributes,
*(s64 *)raw_data);
+ ret = 0;
break;
default:
break;
diff --git a/drivers/iio/magnetometer/rm3100-core.c b/drivers/iio/magnetometer/rm3100-core.c
index 69938204456f..42b70cd42b39 100644
--- a/drivers/iio/magnetometer/rm3100-core.c
+++ b/drivers/iio/magnetometer/rm3100-core.c
@@ -530,6 +530,7 @@ int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq)
struct rm3100_data *data;
unsigned int tmp;
int ret;
+ int samp_rate_index;
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
@@ -586,9 +587,14 @@ int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq)
ret = regmap_read(regmap, RM3100_REG_TMRC, &tmp);
if (ret < 0)
return ret;
+
+ samp_rate_index = tmp - RM3100_TMRC_OFFSET;
+ if (samp_rate_index < 0 || samp_rate_index >= RM3100_SAMP_NUM) {
+ dev_err(dev, "The value read from RM3100_REG_TMRC is invalid!\n");
+ return -EINVAL;
+ }
/* Initializing max wait time, which is double conversion time. */
- data->conversion_time = rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][2]
- * 2;
+ data->conversion_time = rm3100_samp_rates[samp_rate_index][2] * 2;
/* Cycle count values may not be what we want. */
if ((tmp - RM3100_TMRC_OFFSET) == 0)
diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c
index 433d6fac83c4..e8a5fed07e88 100644
--- a/drivers/iio/pressure/bmp280-spi.c
+++ b/drivers/iio/pressure/bmp280-spi.c
@@ -87,6 +87,7 @@ static const struct of_device_id bmp280_of_spi_match[] = {
MODULE_DEVICE_TABLE(of, bmp280_of_spi_match);
static const struct spi_device_id bmp280_spi_id[] = {
+ { "bmp085", (kernel_ulong_t)&bmp180_chip_info },
{ "bmp180", (kernel_ulong_t)&bmp180_chip_info },
{ "bmp181", (kernel_ulong_t)&bmp180_chip_info },
{ "bmp280", (kernel_ulong_t)&bmp280_chip_info },
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 21:27:30 +0000