summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_dvo.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dvo.c')
-rw-r--r--drivers/gpu/drm/i915/intel_dvo.c27
1 files changed, 22 insertions, 5 deletions
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 770040ff486e..ece5bd754f85 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -80,7 +80,7 @@ static const struct intel_dvo_device intel_dvo_devices[] = {
.name = "ch7017",
.dvo_reg = DVOC,
.slave_addr = 0x75,
- .gpio = GMBUS_PORT_DPB,
+ .gpio = GMBUS_PIN_DPB,
.dev_ops = &ch7017_ops,
},
{
@@ -364,7 +364,7 @@ static int intel_dvo_get_modes(struct drm_connector *connector)
* that's not the case.
*/
intel_ddc_get_modes(connector,
- intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC));
+ intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPC));
if (!list_empty(&connector->probed_modes))
return 1;
@@ -495,17 +495,19 @@ void intel_dvo_init(struct drm_device *dev)
struct i2c_adapter *i2c;
int gpio;
bool dvoinit;
+ enum pipe pipe;
+ uint32_t dpll[I915_MAX_PIPES];
/* Allow the I2C driver info to specify the GPIO to be used in
* special cases, but otherwise default to what's defined
* in the spec.
*/
- if (intel_gmbus_is_port_valid(dvo->gpio))
+ if (intel_gmbus_is_valid_pin(dev_priv, dvo->gpio))
gpio = dvo->gpio;
else if (dvo->type == INTEL_DVO_CHIP_LVDS)
- gpio = GMBUS_PORT_SSC;
+ gpio = GMBUS_PIN_SSC;
else
- gpio = GMBUS_PORT_DPB;
+ gpio = GMBUS_PIN_DPB;
/* Set up the I2C bus necessary for the chip we're probing.
* It appears that everything is on GPIOE except for panels
@@ -520,8 +522,23 @@ void intel_dvo_init(struct drm_device *dev)
*/
intel_gmbus_force_bit(i2c, true);
+ /* ns2501 requires the DVO 2x clock before it will
+ * respond to i2c accesses, so make sure we have
+ * have the clock enabled before we attempt to
+ * initialize the device.
+ */
+ for_each_pipe(dev_priv, pipe) {
+ dpll[pipe] = I915_READ(DPLL(pipe));
+ I915_WRITE(DPLL(pipe), dpll[pipe] | DPLL_DVO_2X_MODE);
+ }
+
dvoinit = dvo->dev_ops->init(&intel_dvo->dev, i2c);
+ /* restore the DVO 2x clock state to original */
+ for_each_pipe(dev_priv, pipe) {
+ I915_WRITE(DPLL(pipe), dpll[pipe]);
+ }
+
intel_gmbus_force_bit(i2c, false);
if (!dvoinit)