diff options
Diffstat (limited to 'drivers/edac')
| -rw-r--r-- | drivers/edac/amd64_edac.c | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index ad8bf2aa629d..c58f214aab29 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -602,111 +602,6 @@ static u64 sys_addr_to_input_addr(struct mem_ctl_info *mci, u64 sys_addr) return input_addr; } - -/* - * @input_addr is an InputAddr associated with the node represented by mci. - * Translate @input_addr to a DramAddr and return the result. - */ -static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr) -{ - struct amd64_pvt *pvt; - unsigned node_id, intlv_shift; - u64 bits, dram_addr; - u32 intlv_sel; - - /* - * Near the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E) - * shows how to translate a DramAddr to an InputAddr. Here we reverse - * this procedure. When translating from a DramAddr to an InputAddr, the - * bits used for node interleaving are discarded. Here we recover these - * bits from the IntlvSel field of the DRAM Limit register (section - * 3.4.4.2) for the node that input_addr is associated with. - */ - pvt = mci->pvt_info; - node_id = pvt->mc_node_id; - - BUG_ON(node_id > 7); - - intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0)); - if (intlv_shift == 0) { - edac_dbg(1, " InputAddr 0x%lx translates to DramAddr of same value\n", - (unsigned long)input_addr); - - return input_addr; - } - - bits = ((input_addr & GENMASK(12, 35)) << intlv_shift) + - (input_addr & 0xfff); - - intlv_sel = dram_intlv_sel(pvt, node_id) & ((1 << intlv_shift) - 1); - dram_addr = bits + (intlv_sel << 12); - - edac_dbg(1, "InputAddr 0x%lx translates to DramAddr 0x%lx (%d node interleave bits)\n", - (unsigned long)input_addr, - (unsigned long)dram_addr, intlv_shift); - - return dram_addr; -} - -/* - * @dram_addr is a DramAddr that maps to the node represented by mci. Convert - * @dram_addr to a SysAddr. - */ -static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr) -{ - struct amd64_pvt *pvt = mci->pvt_info; - u64 hole_base, hole_offset, hole_size, base, sys_addr; - int ret = 0; - - ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, - &hole_size); - if (!ret) { - if ((dram_addr >= hole_base) && - (dram_addr < (hole_base + hole_size))) { - sys_addr = dram_addr + hole_offset; - - edac_dbg(1, "using DHAR to translate DramAddr 0x%lx to SysAddr 0x%lx\n", - (unsigned long)dram_addr, - (unsigned long)sys_addr); - - return sys_addr; - } - } - - base = get_dram_base(pvt, pvt->mc_node_id); - sys_addr = dram_addr + base; - - /* - * The sys_addr we have computed up to this point is a 40-bit value - * because the k8 deals with 40-bit values. However, the value we are - * supposed to return is a full 64-bit physical address. The AMD - * x86-64 architecture specifies that the most significant implemented - * address bit through bit 63 of a physical address must be either all - * 0s or all 1s. Therefore we sign-extend the 40-bit sys_addr to a - * 64-bit value below. See section 3.4.2 of AMD publication 24592: - * AMD x86-64 Architecture Programmer's Manual Volume 1 Application - * Programming. - */ - sys_addr |= ~((sys_addr & (1ull << 39)) - 1); - - edac_dbg(1, " Node %d, DramAddr 0x%lx to SysAddr 0x%lx\n", - pvt->mc_node_id, (unsigned long)dram_addr, - (unsigned long)sys_addr); - - return sys_addr; -} - -/* - * @input_addr is an InputAddr associated with the node given by mci. Translate - * @input_addr to a SysAddr. - */ -static inline u64 input_addr_to_sys_addr(struct mem_ctl_info *mci, - u64 input_addr) -{ - return dram_addr_to_sys_addr(mci, - input_addr_to_dram_addr(mci, input_addr)); -} - /* Map the Error address to a PAGE and PAGE OFFSET. */ static inline void error_address_to_page_and_offset(u64 error_address, struct err_info *err) |