diff options
Diffstat (limited to 'drivers/dma')
| -rw-r--r-- | drivers/dma/sh/rz-dmac.c | 25 | ||||
| -rw-r--r-- | drivers/dma/ti/k3-udma.c | 62 |
2 files changed, 61 insertions, 26 deletions
diff --git a/drivers/dma/sh/rz-dmac.c b/drivers/dma/sh/rz-dmac.c index 65a27c5a7bce..811389fc9cb8 100644 --- a/drivers/dma/sh/rz-dmac.c +++ b/drivers/dma/sh/rz-dmac.c @@ -601,22 +601,25 @@ static int rz_dmac_config(struct dma_chan *chan, struct rz_dmac_chan *channel = to_rz_dmac_chan(chan); u32 val; - channel->src_per_address = config->src_addr; channel->dst_per_address = config->dst_addr; - - val = rz_dmac_ds_to_val_mapping(config->dst_addr_width); - if (val == CHCFG_DS_INVALID) - return -EINVAL; - channel->chcfg &= ~CHCFG_FILL_DDS_MASK; - channel->chcfg |= FIELD_PREP(CHCFG_FILL_DDS_MASK, val); + if (channel->dst_per_address) { + val = rz_dmac_ds_to_val_mapping(config->dst_addr_width); + if (val == CHCFG_DS_INVALID) + return -EINVAL; - val = rz_dmac_ds_to_val_mapping(config->src_addr_width); - if (val == CHCFG_DS_INVALID) - return -EINVAL; + channel->chcfg |= FIELD_PREP(CHCFG_FILL_DDS_MASK, val); + } + channel->src_per_address = config->src_addr; channel->chcfg &= ~CHCFG_FILL_SDS_MASK; - channel->chcfg |= FIELD_PREP(CHCFG_FILL_SDS_MASK, val); + if (channel->src_per_address) { + val = rz_dmac_ds_to_val_mapping(config->src_addr_width); + if (val == CHCFG_DS_INVALID) + return -EINVAL; + + channel->chcfg |= FIELD_PREP(CHCFG_FILL_SDS_MASK, val); + } return 0; } diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 406ee199c2ac..b3f27b3f9209 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -3185,27 +3185,40 @@ static int udma_configure_statictr(struct udma_chan *uc, struct udma_desc *d, d->static_tr.elcnt = elcnt; - /* - * PDMA must to close the packet when the channel is in packet mode. - * For TR mode when the channel is not cyclic we also need PDMA to close - * the packet otherwise the transfer will stall because PDMA holds on - * the data it has received from the peripheral. - */ if (uc->config.pkt_mode || !uc->cyclic) { + /* + * PDMA must close the packet when the channel is in packet mode. + * For TR mode when the channel is not cyclic we also need PDMA + * to close the packet otherwise the transfer will stall because + * PDMA holds on the data it has received from the peripheral. + */ unsigned int div = dev_width * elcnt; if (uc->cyclic) d->static_tr.bstcnt = d->residue / d->sglen / div; else d->static_tr.bstcnt = d->residue / div; + } else if (uc->ud->match_data->type == DMA_TYPE_BCDMA && + uc->config.dir == DMA_DEV_TO_MEM && + uc->cyclic) { + /* + * For cyclic mode with BCDMA we have to set EOP in each TR to + * prevent short packet errors seen on channel teardown. So the + * PDMA must close the packet after every TR transfer by setting + * burst count equal to the number of bytes transferred. + */ + struct cppi5_tr_type1_t *tr_req = d->hwdesc[0].tr_req_base; - if (uc->config.dir == DMA_DEV_TO_MEM && - d->static_tr.bstcnt > uc->ud->match_data->statictr_z_mask) - return -EINVAL; + d->static_tr.bstcnt = + (tr_req->icnt0 * tr_req->icnt1) / dev_width; } else { d->static_tr.bstcnt = 0; } + if (uc->config.dir == DMA_DEV_TO_MEM && + d->static_tr.bstcnt > uc->ud->match_data->statictr_z_mask) + return -EINVAL; + return 0; } @@ -3450,8 +3463,9 @@ udma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, /* static TR for remote PDMA */ if (udma_configure_statictr(uc, d, dev_width, burst)) { dev_err(uc->ud->dev, - "%s: StaticTR Z is limited to maximum 4095 (%u)\n", - __func__, d->static_tr.bstcnt); + "%s: StaticTR Z is limited to maximum %u (%u)\n", + __func__, uc->ud->match_data->statictr_z_mask, + d->static_tr.bstcnt); udma_free_hwdesc(uc, d); kfree(d); @@ -3476,6 +3490,7 @@ udma_prep_dma_cyclic_tr(struct udma_chan *uc, dma_addr_t buf_addr, u16 tr0_cnt0, tr0_cnt1, tr1_cnt0; unsigned int i; int num_tr; + u32 period_csf = 0; num_tr = udma_get_tr_counters(period_len, __ffs(buf_addr), &tr0_cnt0, &tr0_cnt1, &tr1_cnt0); @@ -3498,6 +3513,20 @@ udma_prep_dma_cyclic_tr(struct udma_chan *uc, dma_addr_t buf_addr, period_addr = buf_addr | ((u64)uc->config.asel << K3_ADDRESS_ASEL_SHIFT); + /* + * For BCDMA <-> PDMA transfers, the EOP flag needs to be set on the + * last TR of a descriptor, to mark the packet as complete. + * This is required for getting the teardown completion message in case + * of TX, and to avoid short-packet error in case of RX. + * + * As we are in cyclic mode, we do not know which period might be the + * last one, so set the flag for each period. + */ + if (uc->config.ep_type == PSIL_EP_PDMA_XY && + uc->ud->match_data->type == DMA_TYPE_BCDMA) { + period_csf = CPPI5_TR_CSF_EOP; + } + for (i = 0; i < periods; i++) { int tr_idx = i * num_tr; @@ -3525,8 +3554,10 @@ udma_prep_dma_cyclic_tr(struct udma_chan *uc, dma_addr_t buf_addr, } if (!(flags & DMA_PREP_INTERRUPT)) - cppi5_tr_csf_set(&tr_req[tr_idx].flags, - CPPI5_TR_CSF_SUPR_EVT); + period_csf |= CPPI5_TR_CSF_SUPR_EVT; + + if (period_csf) + cppi5_tr_csf_set(&tr_req[tr_idx].flags, period_csf); period_addr += period_len; } @@ -3655,8 +3686,9 @@ udma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, /* static TR for remote PDMA */ if (udma_configure_statictr(uc, d, dev_width, burst)) { dev_err(uc->ud->dev, - "%s: StaticTR Z is limited to maximum 4095 (%u)\n", - __func__, d->static_tr.bstcnt); + "%s: StaticTR Z is limited to maximum %u (%u)\n", + __func__, uc->ud->match_data->statictr_z_mask, + d->static_tr.bstcnt); udma_free_hwdesc(uc, d); kfree(d); |