diff options
Diffstat (limited to 'drivers/char')
37 files changed, 1998 insertions, 2109 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index c602b547cc6e..1697043119bd 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -190,7 +190,7 @@ config DIGIEPCA config ESPSERIAL tristate "Hayes ESP serial port support" - depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API + depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API && BROKEN help This is a driver which supports Hayes ESP serial ports. Both single port cards and multiport cards are supported. Make sure to read @@ -443,6 +443,17 @@ config UNIX98_PTYS All modern Linux systems use the Unix98 ptys. Say Y unless you're on an embedded system and want to conserve memory. +config DEVPTS_MULTIPLE_INSTANCES + bool "Support multiple instances of devpts" + depends on UNIX98_PTYS + default n + ---help--- + Enable support for multiple instances of devpts filesystem. + If you want to have isolated PTY namespaces (eg: in containers), + say Y here. Otherwise, say N. If enabled, each mount of devpts + filesystem with the '-o newinstance' option will create an + independent PTY namespace. + config LEGACY_PTYS bool "Legacy (BSD) PTY support" default y diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index b97aebd7aeb8..4e0cfdeab146 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -170,7 +170,7 @@ static __inline__ void rtsdtr_ctrl(int bits) */ static void rs_stop(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_stop")) @@ -190,7 +190,7 @@ static void rs_stop(struct tty_struct *tty) static void rs_start(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_start")) @@ -861,7 +861,7 @@ static int rs_put_char(struct tty_struct *tty, unsigned char ch) static void rs_flush_chars(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) @@ -934,7 +934,7 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count static int rs_write_room(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; if (serial_paranoia_check(info, tty->name, "rs_write_room")) return 0; @@ -943,7 +943,7 @@ static int rs_write_room(struct tty_struct *tty) static int rs_chars_in_buffer(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) return 0; @@ -952,7 +952,7 @@ static int rs_chars_in_buffer(struct tty_struct *tty) static void rs_flush_buffer(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) @@ -969,7 +969,7 @@ static void rs_flush_buffer(struct tty_struct *tty) */ static void rs_send_xchar(struct tty_struct *tty, char ch) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_send_char")) @@ -1004,7 +1004,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch) */ static void rs_throttle(struct tty_struct * tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE char buf[64]; @@ -1029,7 +1029,7 @@ static void rs_throttle(struct tty_struct * tty) static void rs_unthrottle(struct tty_struct * tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE char buf[64]; @@ -1194,7 +1194,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int __user *value) static int rs_tiocmget(struct tty_struct *tty, struct file *file) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned char control, status; unsigned long flags; @@ -1217,7 +1217,7 @@ static int rs_tiocmget(struct tty_struct *tty, struct file *file) static int rs_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_ioctl")) @@ -1244,7 +1244,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file, */ static int rs_break(struct tty_struct *tty, int break_state) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_break")) @@ -1264,7 +1264,7 @@ static int rs_break(struct tty_struct *tty, int break_state) static int rs_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; struct async_icount cprev, cnow; /* kernel counter temps */ struct serial_icounter_struct icount; void __user *argp = (void __user *)arg; @@ -1368,7 +1368,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; unsigned int cflag = tty->termios->c_cflag; @@ -1428,7 +1428,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) */ static void rs_close(struct tty_struct *tty, struct file * filp) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; struct serial_state *state; unsigned long flags; @@ -1523,7 +1523,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) */ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned long orig_jiffies, char_time; int lsr; @@ -1587,7 +1587,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) */ static void rs_hangup(struct tty_struct *tty) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; struct serial_state *state = info->state; if (serial_paranoia_check(info, tty->name, "rs_hangup")) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 5e5b1dc1a0a7..6a59f72a9c21 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -5010,7 +5010,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, if (nchan == 0) { dev_err(&pdev->dev, "Cyclom-Y PCI host card with no " "Serial-Modules\n"); - return -EIO; + goto err_unmap; } } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { struct RUNTIME_9060 __iomem *ctl_addr; diff --git a/drivers/char/epca.c b/drivers/char/epca.c index cf2461d34e5f..39ad820b2350 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -69,7 +69,9 @@ static int invalid_lilo_config; /* * The ISA boards do window flipping into the same spaces so its only sane with - * a single lock. It's still pretty efficient. + * a single lock. It's still pretty efficient. This lock guards the hardware + * and the tty_port lock guards the kernel side stuff like use counts. Take + * this lock inside the port lock if you must take both. */ static DEFINE_SPINLOCK(epca_lock); @@ -156,14 +158,12 @@ static struct channel *verifyChannel(struct tty_struct *); static void pc_sched_event(struct channel *, int); static void epca_error(int, char *); static void pc_close(struct tty_struct *, struct file *); -static void shutdown(struct channel *); +static void shutdown(struct channel *, struct tty_struct *tty); static void pc_hangup(struct tty_struct *); static int pc_write_room(struct tty_struct *); static int pc_chars_in_buffer(struct tty_struct *); static void pc_flush_buffer(struct tty_struct *); static void pc_flush_chars(struct tty_struct *); -static int block_til_ready(struct tty_struct *, struct file *, - struct channel *); static int pc_open(struct tty_struct *, struct file *); static void post_fep_init(unsigned int crd); static void epcapoll(unsigned long); @@ -173,7 +173,7 @@ static unsigned termios2digi_h(struct channel *ch, unsigned); static unsigned termios2digi_i(struct channel *ch, unsigned); static unsigned termios2digi_c(struct channel *ch, unsigned); static void epcaparam(struct tty_struct *, struct channel *); -static void receive_data(struct channel *); +static void receive_data(struct channel *, struct tty_struct *tty); static int pc_ioctl(struct tty_struct *, struct file *, unsigned int, unsigned long); static int info_ioctl(struct tty_struct *, struct file *, @@ -392,7 +392,7 @@ static struct channel *verifyChannel(struct tty_struct *tty) * through tty->driver_data this should catch it. */ if (tty) { - struct channel *ch = (struct channel *)tty->driver_data; + struct channel *ch = tty->driver_data; if (ch >= &digi_channels[0] && ch < &digi_channels[nbdevs]) { if (ch->magic == EPCA_MAGIC) return ch; @@ -419,76 +419,34 @@ static void epca_error(int line, char *msg) static void pc_close(struct tty_struct *tty, struct file *filp) { struct channel *ch; - unsigned long flags; + struct tty_port *port; /* * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ ch = verifyChannel(tty); - if (ch != NULL) { - spin_lock_irqsave(&epca_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&epca_lock, flags); - return; - } - if (ch->port.count-- > 1) { - /* Begin channel is open more than once */ - /* - * Return without doing anything. Someone might still - * be using the channel. - */ - spin_unlock_irqrestore(&epca_lock, flags); - return; - } - /* Port open only once go ahead with shutdown & reset */ - BUG_ON(ch->port.count < 0); - - /* - * Let the rest of the driver know the channel is being closed. - * This becomes important if an open is attempted before close - * is finished. - */ - ch->port.flags |= ASYNC_CLOSING; - tty->closing = 1; - - spin_unlock_irqrestore(&epca_lock, flags); - - if (ch->port.flags & ASYNC_INITIALIZED) { - /* Setup an event to indicate when the - transmit buffer empties */ - setup_empty_event(tty, ch); - /* 30 seconds timeout */ - tty_wait_until_sent(tty, 3000); - } - pc_flush_buffer(tty); + if (ch == NULL) + return; + port = &ch->port; - tty_ldisc_flush(tty); - shutdown(ch); + if (tty_port_close_start(port, tty, filp) == 0) + return; - spin_lock_irqsave(&epca_lock, flags); - tty->closing = 0; - ch->event = 0; - ch->port.tty = NULL; - spin_unlock_irqrestore(&epca_lock, flags); + pc_flush_buffer(tty); + shutdown(ch, tty); - if (ch->port.blocked_open) { - if (ch->close_delay) - msleep_interruptible(jiffies_to_msecs(ch->close_delay)); - wake_up_interruptible(&ch->port.open_wait); - } - ch->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED | - ASYNC_CLOSING); - wake_up_interruptible(&ch->port.close_wait); - } + tty_port_close_end(port, tty); + ch->event = 0; /* FIXME: review ch->event locking */ + tty_port_tty_set(port, NULL); } -static void shutdown(struct channel *ch) +static void shutdown(struct channel *ch, struct tty_struct *tty) { unsigned long flags; - struct tty_struct *tty; struct board_chan __iomem *bc; + struct tty_port *port = &ch->port; - if (!(ch->port.flags & ASYNC_INITIALIZED)) + if (!(port->flags & ASYNC_INITIALIZED)) return; spin_lock_irqsave(&epca_lock, flags); @@ -503,7 +461,6 @@ static void shutdown(struct channel *ch) */ if (bc) writeb(0, &bc->idata); - tty = ch->port.tty; /* If we're a modem control device and HUPCL is on, drop RTS & DTR. */ if (tty->termios->c_cflag & HUPCL) { @@ -517,32 +474,26 @@ static void shutdown(struct channel *ch) * will have to reinitialized. Set a flag to indicate this. */ /* Prevent future Digi programmed interrupts from coming active */ - ch->port.flags &= ~ASYNC_INITIALIZED; + port->flags &= ~ASYNC_INITIALIZED; spin_unlock_irqrestore(&epca_lock, flags); } static void pc_hangup(struct tty_struct *tty) { struct channel *ch; + /* * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ ch = verifyChannel(tty); if (ch != NULL) { - unsigned long flags; - pc_flush_buffer(tty); tty_ldisc_flush(tty); - shutdown(ch); + shutdown(ch, tty); - spin_lock_irqsave(&epca_lock, flags); - ch->port.tty = NULL; - ch->event = 0; - ch->port.count = 0; - ch->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED); - spin_unlock_irqrestore(&epca_lock, flags); - wake_up_interruptible(&ch->port.open_wait); + ch->event = 0; /* FIXME: review locking of ch->event */ + tty_port_hangup(&ch->port); } } @@ -786,100 +737,22 @@ static void pc_flush_chars(struct tty_struct *tty) } } -static int block_til_ready(struct tty_struct *tty, - struct file *filp, struct channel *ch) +static int epca_carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval, do_clocal = 0; - unsigned long flags; - - if (tty_hung_up_p(filp)) { - if (ch->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - return retval; - } - - /* - * If the device is in the middle of being closed, then block until - * it's done, and then try again. - */ - if (ch->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&ch->port.close_wait); - - if (ch->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - if (filp->f_flags & O_NONBLOCK) { - /* - * If non-blocking mode is set, then make the check up front - * and then exit. - */ - ch->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - /* Block waiting for the carrier detect and the line to become free */ - - retval = 0; - add_wait_queue(&ch->port.open_wait, &wait); - - spin_lock_irqsave(&epca_lock, flags); - /* We dec count so that pc_close will know when to free things */ - if (!tty_hung_up_p(filp)) - ch->port.count--; - ch->port.blocked_open++; - while (1) { - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(ch->port.flags & ASYNC_INITIALIZED)) { - if (ch->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(ch->port.flags & ASYNC_CLOSING) && - (do_clocal || (ch->imodem & ch->dcd))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - spin_unlock_irqrestore(&epca_lock, flags); - /* - * Allow someone else to be scheduled. We will occasionally go - * through this loop until one of the above conditions change. - * The below schedule call will allow other processes to enter - * and prevent this loop from hogging the cpu. - */ - schedule(); - spin_lock_irqsave(&epca_lock, flags); - } - - __set_current_state(TASK_RUNNING); - remove_wait_queue(&ch->port.open_wait, &wait); - if (!tty_hung_up_p(filp)) - ch->port.count++; - ch->port.blocked_open--; - - spin_unlock_irqrestore(&epca_lock, flags); - - if (retval) - return retval; - - ch->port.flags |= ASYNC_NORMAL_ACTIVE; + struct channel *ch = container_of(port, struct channel, port); + if (ch->imodem & ch->dcd) + return 1; return 0; } +static void epca_raise_dtr_rts(struct tty_port *port) +{ +} + static int pc_open(struct tty_struct *tty, struct file *filp) { struct channel *ch; + struct tty_port *port; unsigned long flags; int line, retval, boardnum; struct board_chan __iomem *bc; @@ -890,6 +763,7 @@ static int pc_open(struct tty_struct *tty, struct file *filp) return -ENODEV; ch = &digi_channels[line]; + port = &ch->port; boardnum = ch->boardnum; /* Check status of board configured in system. */ @@ -926,22 +800,24 @@ static int pc_open(struct tty_struct *tty, struct file *filp) return -ENODEV; } - spin_lock_irqsave(&epca_lock, flags); + spin_lock_irqsave(&port->lock, flags); /* * Every time a channel is opened, increment a counter. This is * necessary because we do not wish to flush and shutdown the channel * until the last app holding the channel open, closes it. */ - ch->port.count++; + port->count++; /* * Set a kernel structures pointer to our local channel structure. This * way we can get to it when passed only a tty struct. */ tty->driver_data = ch; + port->tty = tty; /* * If this is the first time the channel has been opened, initialize * the tty->termios struct otherwise let pc_close handle it. */ + spin_lock(&epca_lock); globalwinon(ch); ch->statusflags = 0; @@ -956,31 +832,33 @@ static int pc_open(struct tty_struct *tty, struct file *filp) writew(head, &bc->rout); /* Set the channels associated tty structure */ - ch->port.tty = tty; /* * The below routine generally sets up parity, baud, flow control * issues, etc.... It effect both control flags and input flags. */ epcaparam(tty, ch); - ch->port.flags |= ASYNC_INITIALIZED; memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); + spin_unlock(&epca_lock); + port->flags |= ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->lock, flags); - retval = block_til_ready(tty, filp, ch); + retval = tty_port_block_til_ready(port, tty, filp); if (retval) return retval; /* * Set this again in case a hangup set it to zero while this open() was * waiting for the line... */ - spin_lock_irqsave(&epca_lock, flags); - ch->port.tty = tty; + spin_lock_irqsave(&port->lock, flags); + port->tty = tty; + spin_lock(&epca_lock); globalwinon(ch); /* Enable Digi Data events */ writeb(1, &bc->idata); memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); + spin_unlock(&epca_lock); + spin_unlock_irqrestore(&port->lock, flags); return 0; } @@ -1016,8 +894,11 @@ static void __exit epca_module_exit(void) } ch = card_ptr[crd]; for (count = 0; count < bd->numports; count++, ch++) { - if (ch && ch->port.tty) - tty_hangup(ch->port.tty); + struct tty_struct *tty = tty_port_tty_get(&ch->port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } } } pci_unregister_driver(&epca_driver); @@ -1042,6 +923,11 @@ static const struct tty_operations pc_ops = { .break_ctl = pc_send_break }; +static const struct tty_port_operations epca_port_ops = { + .carrier_raised = epca_carrier_raised, + .raise_dtr_rts = epca_raise_dtr_rts, +}; + static int info_open(struct tty_struct *tty, struct file *filp) { return 0; @@ -1377,6 +1263,7 @@ static void post_fep_init(unsigned int crd) u16 tseg, rseg; tty_port_init(&ch->port); + ch->port.ops = &epca_port_ops; ch->brdchan = bc; ch->mailbox = gd; INIT_WORK(&ch->tqueue, do_softint); @@ -1428,7 +1315,7 @@ static void post_fep_init(unsigned int crd) ch->boardnum = crd; ch->channelnum = i; ch->magic = EPCA_MAGIC; - ch->port.tty = NULL; + tty_port_tty_set(&ch->port, NULL); if (shrinkmem) { fepcmd(ch, SETBUFFER, 32, 0, 0, 0); @@ -1510,7 +1397,7 @@ static void post_fep_init(unsigned int crd) ch->fepstartca = 0; ch->fepstopca = 0; - ch->close_delay = 50; + ch->port.close_delay = 50; spin_unlock_irqrestore(&epca_lock, flags); } @@ -1622,15 +1509,16 @@ static void doevent(int crd) if (bc == NULL) goto next; + tty = tty_port_tty_get(&ch->port); if (event & DATA_IND) { /* Begin DATA_IND */ - receive_data(ch); + receive_data(ch, tty); assertgwinon(ch); } /* End DATA_IND */ /* else *//* Fix for DCD transition missed bug */ if (event & MODEMCHG_IND) { /* A modem signal change has been indicated */ ch->imodem = mstat; - if (ch->port.flags & ASYNC_CHECK_CD) { + if (test_bit(ASYNC_CHECK_CD, &ch->port.flags)) { /* We are now receiving dcd */ if (mstat & ch->dcd) wake_up_interruptible(&ch->port.open_wait); @@ -1638,7 +1526,6 @@ static void doevent(int crd) pc_sched_event(ch, EPCA_EVENT_HANGUP); } } - tty = ch->port.tty; if (tty) { if (event & BREAK_IND) { /* A break has been indicated */ @@ -1658,6 +1545,7 @@ static void doevent(int crd) tty_wakeup(tty); } } + tty_kref_put(tty); } next: globalwinon(ch); @@ -1877,9 +1765,9 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch) * that the driver will wait on carrier detect. */ if (ts->c_cflag & CLOCAL) - ch->port.flags &= ~ASYNC_CHECK_CD; + clear_bit(ASYNC_CHECK_CD, &ch->port.flags); else - ch->port.flags |= ASYNC_CHECK_CD; + set_bit(ASYNC_CHECK_CD, &ch->port.flags); mval = ch->m_dtr | ch->m_rts; } /* End CBAUD not detected */ iflag = termios2digi_i(ch, ts->c_iflag); @@ -1952,11 +1840,10 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch) } /* Caller holds lock */ -static void receive_data(struct channel *ch) +static void receive_data(struct channel *ch, struct tty_struct *tty) { unchar *rptr; struct ktermios *ts = NULL; - struct tty_struct *tty; struct board_chan __iomem *bc; int dataToRead, wrapgap, bytesAvailable; unsigned int tail, head; @@ -1969,7 +1856,6 @@ static void receive_data(struct channel *ch) globalwinon(ch); if (ch->statusflags & RXSTOPPED) return; - tty = ch->port.tty; if (tty) ts = tty->termios; bc = ch->brdchan; @@ -2029,7 +1915,7 @@ static void receive_data(struct channel *ch) globalwinon(ch); writew(tail, &bc->rout); /* Must be called with global data */ - tty_schedule_flip(ch->port.tty); + tty_schedule_flip(tty); } static int info_ioctl(struct tty_struct *tty, struct file *file, @@ -2097,7 +1983,7 @@ static int info_ioctl(struct tty_struct *tty, struct file *file, static int pc_tiocmget(struct tty_struct *tty, struct file *file) { - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; struct board_chan __iomem *bc; unsigned int mstat, mflag = 0; unsigned long flags; @@ -2131,7 +2017,7 @@ static int pc_tiocmget(struct tty_struct *tty, struct file *file) static int pc_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; unsigned long flags; if (!ch) @@ -2178,7 +2064,7 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, unsigned int mflag, mstat; unsigned char startc, stopc; struct board_chan __iomem *bc; - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; void __user *argp = (void __user *)arg; if (ch) @@ -2352,15 +2238,16 @@ static void do_softint(struct work_struct *work) struct channel *ch = container_of(work, struct channel, tqueue); /* Called in response to a modem change event */ if (ch && ch->magic == EPCA_MAGIC) { - struct tty_struct *tty = ch->port.tty; + struct tty_struct *tty = tty_port_tty_get(&ch->port);; if (tty && tty->driver_data) { if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) { tty_hangup(tty); wake_up_interruptible(&ch->port.open_wait); - ch->port.flags &= ~ASYNC_NORMAL_ACTIVE; + clear_bit(ASYNC_NORMAL_ACTIVE, &ch->port.flags); } } + tty_kref_put(tty); } } @@ -2473,7 +2360,7 @@ static void pc_unthrottle(struct tty_struct *tty) static int pc_send_break(struct tty_struct *tty, int msec) { - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; unsigned long flags; if (msec == -1) diff --git a/drivers/char/esp.c b/drivers/char/esp.c index 7f077c0097f6..45ec263ec012 100644 --- a/drivers/char/esp.c +++ b/drivers/char/esp.c @@ -2054,6 +2054,15 @@ static void esp_hangup(struct tty_struct *tty) wake_up_interruptible(&info->port.open_wait); } +static int esp_carrier_raised(struct tty_port *port) +{ + struct esp_struct *info = container_of(port, struct esp_struct, port); + serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); + if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD) + return 1; + return 0; +} + /* * ------------------------------------------------------------ * esp_open() and friends @@ -2066,17 +2075,19 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, int retval; int do_clocal = 0; unsigned long flags; + int cd; + struct tty_port *port = &info->port; /* * If the device is in the middle of being closed, then block * until it's done, and then try again. */ if (tty_hung_up_p(filp) || - (info->port.flags & ASYNC_CLOSING)) { - if (info->port.flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->port.close_wait); + (port->flags & ASYNC_CLOSING)) { + if (port->flags & ASYNC_CLOSING) + interruptible_sleep_on(&port->close_wait); #ifdef SERIAL_DO_RESTART - if (info->port.flags & ASYNC_HUP_NOTIFY) + if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; else return -ERESTARTSYS; @@ -2091,7 +2102,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -2101,20 +2112,20 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, /* * Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * rs_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); #ifdef SERIAL_DEBUG_OPEN printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n", - info->line, info->port.count); + info->line, port->count); #endif spin_lock_irqsave(&info->lock, flags); if (!tty_hung_up_p(filp)) - info->port.count--; - info->port.blocked_open++; + port->count--; + port->blocked_open++; while (1) { if ((tty->termios->c_cflag & CBAUD)) { unsigned int scratch; @@ -2129,9 +2140,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || - !(info->port.flags & ASYNC_INITIALIZED)) { + !(port->flags & ASYNC_INITIALIZED)) { #ifdef SERIAL_DO_RESTART - if (info->port.flags & ASYNC_HUP_NOTIFY) + if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; @@ -2141,11 +2152,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, break; } - serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); - if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD) - do_clocal = 1; + cd = tty_port_carrier_raised(port); - if (!(info->port.flags & ASYNC_CLOSING) && + if (!(port->flags & ASYNC_CLOSING) && (do_clocal)) break; if (signal_pending(current)) { @@ -2154,25 +2163,25 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } #ifdef SERIAL_DEBUG_OPEN printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n", - info->line, info->port.count); + info->line, port->count); #endif spin_unlock_irqrestore(&info->lock, flags); schedule(); spin_lock_irqsave(&info->lock, flags); } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); if (!tty_hung_up_p(filp)) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; spin_unlock_irqrestore(&info->lock, flags); #ifdef SERIAL_DEBUG_OPEN printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n", - info->line, info->port.count); + info->line, port->count); #endif if (retval) return retval; - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -2329,6 +2338,10 @@ static const struct tty_operations esp_ops = { .tiocmset = esp_tiocmset, }; +static const struct tty_port_operations esp_port_ops = { + .esp_carrier_raised, +}; + /* * The serial driver boot-time initialization code! */ @@ -2415,6 +2428,8 @@ static int __init espserial_init(void) offset = 0; do { + tty_port_init(&info->port); + info->port.ops = &esp_port_ops; info->io_port = esp[i] + offset; info->irq = irq[i]; info->line = (i * 8) + (offset / 8); @@ -2437,8 +2452,6 @@ static int __init espserial_init(void) info->config.flow_off = flow_off; info->config.pio_threshold = pio_threshold; info->next_port = ports; - init_waitqueue_head(&info->port.open_wait); - init_waitqueue_head(&info->port.close_wait); init_waitqueue_head(&info->delta_msr_wait); init_waitqueue_head(&info->break_wait); ports = info; diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c index c6090f84a2e4..9e4e569dc00d 100644 --- a/drivers/char/generic_serial.c +++ b/drivers/char/generic_serial.c @@ -376,7 +376,8 @@ static void gs_shutdown_port (struct gs_port *port) void gs_hangup(struct tty_struct *tty) { - struct gs_port *port; + struct gs_port *port; + unsigned long flags; func_enter (); @@ -386,9 +387,11 @@ void gs_hangup(struct tty_struct *tty) return; gs_shutdown_port (port); + spin_lock_irqsave(&port->port.lock, flags); port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|GS_ACTIVE); port->port.tty = NULL; port->port.count = 0; + spin_unlock_irqrestore(&port->port.lock, flags); wake_up_interruptible(&port->port.open_wait); func_exit (); @@ -397,7 +400,8 @@ void gs_hangup(struct tty_struct *tty) int gs_block_til_ready(void *port_, struct file * filp) { - struct gs_port *port = port_; + struct gs_port *gp = port_; + struct tty_port *port = &gp->port; DECLARE_WAITQUEUE(wait, current); int retval; int do_clocal = 0; @@ -409,16 +413,16 @@ int gs_block_til_ready(void *port_, struct file * filp) if (!port) return 0; - tty = port->port.tty; + tty = port->tty; gs_dprintk (GS_DEBUG_BTR, "Entering gs_block_till_ready.\n"); /* * If the device is in the middle of being closed, then block * until it's done, and then try again. */ - if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->port.close_wait); - if (port->port.flags & ASYNC_HUP_NOTIFY) + if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&port->close_wait); + if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; else return -ERESTARTSYS; @@ -432,7 +436,7 @@ int gs_block_til_ready(void *port_, struct file * filp) */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - port->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -444,34 +448,34 @@ int gs_block_til_ready(void *port_, struct file * filp) /* * Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, port->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * rs_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&port->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); gs_dprintk (GS_DEBUG_BTR, "after add waitq.\n"); - spin_lock_irqsave(&port->driver_lock, flags); + spin_lock_irqsave(&port->lock, flags); if (!tty_hung_up_p(filp)) { - port->port.count--; + port->count--; } - spin_unlock_irqrestore(&port->driver_lock, flags); - port->port.blocked_open++; + port->blocked_open++; + spin_unlock_irqrestore(&port->lock, flags); while (1) { - CD = port->rd->get_CD (port); + CD = tty_port_carrier_raised(port); gs_dprintk (GS_DEBUG_BTR, "CD is now %d.\n", CD); set_current_state (TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || - !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) + !(port->flags & ASYNC_INITIALIZED)) { + if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; break; } - if (!(port->port.flags & ASYNC_CLOSING) && + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || CD)) break; gs_dprintk (GS_DEBUG_BTR, "signal_pending is now: %d (%lx)\n", @@ -483,19 +487,20 @@ int gs_block_til_ready(void *port_, struct file * filp) schedule(); } gs_dprintk (GS_DEBUG_BTR, "Got out of the loop. (%d)\n", - port->port.blocked_open); + port->blocked_open); set_current_state (TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); + + spin_lock_irqsave(&port->lock, flags); if (!tty_hung_up_p(filp)) { - port->port.count++; + port->count++; } - port->port.blocked_open--; - if (retval) - return retval; - - port->port.flags |= ASYNC_NORMAL_ACTIVE; + port->blocked_open--; + if (retval == 0) + port->flags |= ASYNC_NORMAL_ACTIVE; + spin_unlock_irqrestore(&port->lock, flags); func_exit (); - return 0; + return retval; } @@ -506,7 +511,7 @@ void gs_close(struct tty_struct * tty, struct file * filp) func_enter (); - port = (struct gs_port *) tty->driver_data; + port = tty->driver_data; if (!port) return; @@ -516,10 +521,10 @@ void gs_close(struct tty_struct * tty, struct file * filp) port->port.tty = tty; } - spin_lock_irqsave(&port->driver_lock, flags); + spin_lock_irqsave(&port->port.lock, flags); if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); if (port->rd->hungup) port->rd->hungup (port); func_exit (); @@ -538,7 +543,7 @@ void gs_close(struct tty_struct * tty, struct file * filp) if (port->port.count) { gs_dprintk(GS_DEBUG_CLOSE, "gs_close port %p: count: %d\n", port, port->port.count); - spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); func_exit (); return; } @@ -559,8 +564,10 @@ void gs_close(struct tty_struct * tty, struct file * filp) * line status register. */ + spin_lock_irqsave(&port->driver_lock, flags); port->rd->disable_rx_interrupts (port); spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); /* close has no way of returning "EINTR", so discard return value */ if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) @@ -573,20 +580,25 @@ void gs_close(struct tty_struct * tty, struct file * filp) tty_ldisc_flush(tty); tty->closing = 0; + spin_lock_irqsave(&port->driver_lock, flags); port->event = 0; port->rd->close (port); port->rd->shutdown_port (port); + spin_unlock_irqrestore(&port->driver_lock, flags); + + spin_lock_irqsave(&port->port.lock, flags); port->port.tty = NULL; if (port->port.blocked_open) { if (port->close_delay) { - spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); msleep_interruptible(jiffies_to_msecs(port->close_delay)); - spin_lock_irqsave(&port->driver_lock, flags); + spin_lock_irqsave(&port->port.lock, flags); } wake_up_interruptible(&port->port.open_wait); } port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING | ASYNC_INITIALIZED); + spin_unlock_irqrestore(&port->port.lock, flags); wake_up_interruptible(&port->port.close_wait); func_exit (); diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 0587b66d6fc7..5a8a4c28c867 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -529,7 +529,7 @@ static void hvc_set_winsz(struct work_struct *work) tty = tty_kref_get(hp->tty); spin_unlock_irqrestore(&hp->lock, hvc_flags); - tty_do_resize(tty, tty, &ws); + tty_do_resize(tty, &ws); tty_kref_put(tty); } diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c index af055287271a..406f8742a260 100644 --- a/drivers/char/hvsi.c +++ b/drivers/char/hvsi.c @@ -997,14 +997,14 @@ out: static int hvsi_write_room(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; return N_OUTBUF - hp->n_outbuf; } static int hvsi_chars_in_buffer(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; return hp->n_outbuf; } @@ -1070,7 +1070,7 @@ out: */ static void hvsi_throttle(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; pr_debug("%s\n", __func__); @@ -1079,7 +1079,7 @@ static void hvsi_throttle(struct tty_struct *tty) static void hvsi_unthrottle(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; unsigned long flags; int shouldflip = 0; @@ -1100,7 +1100,7 @@ static void hvsi_unthrottle(struct tty_struct *tty) static int hvsi_tiocmget(struct tty_struct *tty, struct file *file) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; hvsi_get_mctrl(hp); return hp->mctrl; @@ -1109,7 +1109,7 @@ static int hvsi_tiocmget(struct tty_struct *tty, struct file *file) static int hvsi_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; unsigned long flags; uint16_t new_mctrl; diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 04e4549299ba..24aa6e88e223 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -328,11 +328,13 @@ static inline void drop_rts(struct isi_port *port) } /* card->lock MUST NOT be held */ -static inline void raise_dtr_rts(struct isi_port *port) + +static void isicom_raise_dtr_rts(struct tty_port *port) { - struct isi_board *card = port->card; + struct isi_port *ip = container_of(port, struct isi_port, port); + struct isi_board *card = ip->card; unsigned long base = card->base; - u16 channel = port->channel; + u16 channel = ip->channel; if (!lock_card(card)) return; @@ -340,7 +342,7 @@ static inline void raise_dtr_rts(struct isi_port *port) outw(0x8000 | (channel << card->shift_count) | 0x02, base); outw(0x0f04, base); InterruptTheCard(base); - port->status |= (ISI_DTR | ISI_RTS); + ip->status |= (ISI_DTR | ISI_RTS); unlock_card(card); } @@ -830,80 +832,10 @@ static int isicom_setup_port(struct tty_struct *tty) return 0; } -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct isi_port *port) +static int isicom_carrier_raised(struct tty_port *port) { - struct isi_board *card = port->card; - int do_clocal = 0, retval; - unsigned long flags; - DECLARE_WAITQUEUE(wait, current); - - /* block if port is in the process of being closed */ - - if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { - pr_dbg("block_til_ready: close in progress.\n"); - interruptible_sleep_on(&port->port.close_wait); - if (port->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - /* if non-blocking mode is set ... */ - - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - pr_dbg("block_til_ready: non-block mode.\n"); - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* block waiting for DCD to be asserted, and while - callout dev is busy */ - retval = 0; - add_wait_queue(&port->port.open_wait, &wait); - - spin_lock_irqsave(&card->card_lock, flags); - if (!tty_hung_up_p(filp)) - port->port.count--; - port->port.blocked_open++; - spin_unlock_irqrestore(&card->card_lock, flags); - - while (1) { - raise_dtr_rts(port); - - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->port.flags & ASYNC_CLOSING) && - (do_clocal || (port->status & ISI_DCD))) { - break; - } - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); - spin_lock_irqsave(&card->card_lock, flags); - if (!tty_hung_up_p(filp)) - port->port.count++; - port->port.blocked_open--; - spin_unlock_irqrestore(&card->card_lock, flags); - if (retval) - return retval; - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + struct isi_port *ip = container_of(port, struct isi_port, port); + return (ip->status & ISI_DCD)?1 : 0; } static int isicom_open(struct tty_struct *tty, struct file *filp) @@ -932,12 +864,13 @@ static int isicom_open(struct tty_struct *tty, struct file *filp) isicom_setup_board(card); + /* FIXME: locking on port.count etc */ port->port.count++; tty->driver_data = port; tty_port_tty_set(&port->port, tty); error = isicom_setup_port(tty); if (error == 0) - error = block_til_ready(tty, filp, port); + error = tty_port_block_til_ready(&port->port, tty, filp); return error; } @@ -1012,76 +945,30 @@ static void isicom_flush_buffer(struct tty_struct *tty) static void isicom_close(struct tty_struct *tty, struct file *filp) { - struct isi_port *port = tty->driver_data; + struct isi_port *ip = tty->driver_data; + struct tty_port *port = &ip->port; struct isi_board *card; unsigned long flags; - if (!port) - return; - card = port->card; - if (isicom_paranoia_check(port, tty->name, "isicom_close")) - return; - - pr_dbg("Close start!!!.\n"); - - spin_lock_irqsave(&card->card_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&card->card_lock, flags); - return; - } - - if (tty->count == 1 && port->port.count != 1) { - printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port " - "count tty->count = 1 port count = %d.\n", - card->base, port->port.count); - port->port.count = 1; - } - if (--port->port.count < 0) { - printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port " - "count for channel%d = %d", card->base, port->channel, - port->port.count); - port->port.count = 0; - } + BUG_ON(!ip); - if (port->port.count) { - spin_unlock_irqrestore(&card->card_lock, flags); + card = ip->card; + if (isicom_paranoia_check(ip, tty->name, "isicom_close")) return; - } - port->port.flags |= ASYNC_CLOSING; - tty->closing = 1; - spin_unlock_irqrestore(&card->card_lock, flags); - if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->port.closing_wait); /* indicate to the card that no more data can be received on this port */ spin_lock_irqsave(&card->card_lock, flags); - if (port->port.flags & ASYNC_INITIALIZED) { - card->port_status &= ~(1 << port->channel); + if (port->flags & ASYNC_INITIALIZED) { + card->port_status &= ~(1 << ip->channel); outw(card->port_status, card->base + 0x02); } - isicom_shutdown_port(port); + isicom_shutdown_port(ip); spin_unlock_irqrestore(&card->card_lock, flags); isicom_flush_buffer(tty); - tty_ldisc_flush(tty); - - spin_lock_irqsave(&card->card_lock, flags); - tty->closing = 0; - - if (port->port.blocked_open) { - spin_unlock_irqrestore(&card->card_lock, flags); - if (port->port.close_delay) { - pr_dbg("scheduling until time out.\n"); - msleep_interruptible( - jiffies_to_msecs(port->port.close_delay)); - } - spin_lock_irqsave(&card->card_lock, flags); - wake_up_interruptible(&port->port.open_wait); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); - wake_up_interruptible(&port->port.close_wait); - spin_unlock_irqrestore(&card->card_lock, flags); + + tty_port_close_end(port, tty); } /* write et all */ @@ -1420,10 +1307,7 @@ static void isicom_hangup(struct tty_struct *tty) isicom_shutdown_port(port); spin_unlock_irqrestore(&port->card->card_lock, flags); - port->port.count = 0; - port->port.flags &= ~ASYNC_NORMAL_ACTIVE; - tty_port_tty_set(&port->port, NULL); - wake_up_interruptible(&port->port.open_wait); + tty_port_hangup(&port->port); } @@ -1452,6 +1336,11 @@ static const struct tty_operations isicom_ops = { .break_ctl = isicom_send_break, }; +static const struct tty_port_operations isicom_port_ops = { + .carrier_raised = isicom_carrier_raised, + .raise_dtr_rts = isicom_raise_dtr_rts, +}; + static int __devinit reset_card(struct pci_dev *pdev, const unsigned int card, unsigned int *signature) { @@ -1794,6 +1683,7 @@ static int __init isicom_init(void) spin_lock_init(&isi_card[idx].card_lock); for (channel = 0; channel < 16; channel++, port++) { tty_port_init(&port->port); + port->port.ops = &isicom_port_ops; port->magic = ISICOM_MAGIC; port->card = &isi_card[idx]; port->channel = channel; diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 4b10770fa937..5c3dc6b8411c 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -151,7 +151,7 @@ static char *stli_drvversion = "5.6.0"; static char *stli_serialname = "ttyE"; static struct tty_driver *stli_serial; - +static const struct tty_port_operations stli_port_ops; #define STLI_TXBUFSIZE 4096 @@ -626,8 +626,6 @@ static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp); static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp); static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); -static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp, - struct stliport *portp, struct file *filp); static int stli_setport(struct tty_struct *tty); static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); @@ -769,7 +767,7 @@ static int stli_parsebrd(struct stlconf *confp, char **argp) break; } if (i == ARRAY_SIZE(stli_brdstr)) { - printk("STALLION: unknown board name, %s?\n", argp[0]); + printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]); return 0; } @@ -787,6 +785,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) { struct stlibrd *brdp; struct stliport *portp; + struct tty_port *port; unsigned int minordev, brdnr, portnr; int rc; @@ -808,30 +807,19 @@ static int stli_open(struct tty_struct *tty, struct file *filp) return -ENODEV; if (portp->devnr < 1) return -ENODEV; - - -/* - * Check if this port is in the middle of closing. If so then wait - * until it is closed then return error status based on flag settings. - * The sleep here does not need interrupt protection since the wakeup - * for it is done with the same context. - */ - if (portp->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&portp->port.close_wait); - if (portp->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - return -ERESTARTSYS; - } + port = &portp->port; /* * On the first open of the device setup the port hardware, and * initialize the per port data structure. Since initializing the port * requires several commands to the board we will need to wait for any * other open that is already initializing the port. + * + * Review - locking */ - tty_port_tty_set(&portp->port, tty); + tty_port_tty_set(port, tty); tty->driver_data = portp; - portp->port.count++; + port->count++; wait_event_interruptible(portp->raw_wait, !test_bit(ST_INITIALIZING, &portp->state)); @@ -841,7 +829,8 @@ static int stli_open(struct tty_struct *tty, struct file *filp) if ((portp->port.flags & ASYNC_INITIALIZED) == 0) { set_bit(ST_INITIALIZING, &portp->state); if ((rc = stli_initopen(tty, brdp, portp)) >= 0) { - portp->port.flags |= ASYNC_INITIALIZED; + /* Locking */ + port->flags |= ASYNC_INITIALIZED; clear_bit(TTY_IO_ERROR, &tty->flags); } clear_bit(ST_INITIALIZING, &portp->state); @@ -849,31 +838,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) if (rc < 0) return rc; } - -/* - * Check if this port is in the middle of closing. If so then wait - * until it is closed then return error status, based on flag settings. - * The sleep here does not need interrupt protection since the wakeup - * for it is done with the same context. - */ - if (portp->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&portp->port.close_wait); - if (portp->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - return -ERESTARTSYS; - } - -/* - * Based on type of open being done check if it can overlap with any - * previous opens still in effect. If we are a normal serial device - * then also we might have to wait for carrier. - */ - if (!(filp->f_flags & O_NONBLOCK)) { - if ((rc = stli_waitcarrier(tty, brdp, portp, filp)) != 0) - return rc; - } - portp->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + return tty_port_block_til_ready(&portp->port, tty, filp); } /*****************************************************************************/ @@ -882,25 +847,16 @@ static void stli_close(struct tty_struct *tty, struct file *filp) { struct stlibrd *brdp; struct stliport *portp; + struct tty_port *port; unsigned long flags; portp = tty->driver_data; if (portp == NULL) return; + port = &portp->port; - spin_lock_irqsave(&stli_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&stli_lock, flags); - return; - } - if ((tty->count == 1) && (portp->port.count != 1)) - portp->port.count = 1; - if (portp->port.count-- > 1) { - spin_unlock_irqrestore(&stli_lock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - - portp->port.flags |= ASYNC_CLOSING; /* * May want to wait for data to drain before closing. The BUSY flag @@ -908,15 +864,19 @@ static void stli_close(struct tty_struct *tty, struct file *filp) * updated by messages from the slave - indicating when all chars * really have drained. */ + spin_lock_irqsave(&stli_lock, flags); if (tty == stli_txcooktty) stli_flushchars(tty); - tty->closing = 1; spin_unlock_irqrestore(&stli_lock, flags); + /* We end up doing this twice for the moment. This needs looking at + eventually. Note we still use portp->closing_wait as a result */ if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, portp->closing_wait); - portp->port.flags &= ~ASYNC_INITIALIZED; + /* FIXME: port locking here needs attending to */ + port->flags &= ~ASYNC_INITIALIZED; + brdp = stli_brds[portp->brdnr]; stli_rawclose(brdp, portp, 0, 0); if (tty->termios->c_cflag & HUPCL) { @@ -934,17 +894,8 @@ static void stli_close(struct tty_struct *tty, struct file *filp) set_bit(ST_DOFLUSHRX, &portp->state); stli_flushbuffer(tty); - tty->closing = 0; - tty_port_tty_set(&portp->port, NULL); - - if (portp->openwaitcnt) { - if (portp->close_delay) - msleep_interruptible(jiffies_to_msecs(portp->close_delay)); - wake_up_interruptible(&portp->port.open_wait); - } - - portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&portp->port.close_wait); + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } /*****************************************************************************/ @@ -1183,62 +1134,23 @@ static int stli_setport(struct tty_struct *tty) /*****************************************************************************/ -/* - * Possibly need to wait for carrier (DCD signal) to come high. Say - * maybe because if we are clocal then we don't need to wait... - */ - -static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp, - struct stliport *portp, struct file *filp) +static int stli_carrier_raised(struct tty_port *port) { - unsigned long flags; - int rc, doclocal; - - rc = 0; - doclocal = 0; - - if (tty->termios->c_cflag & CLOCAL) - doclocal++; - - spin_lock_irqsave(&stli_lock, flags); - portp->openwaitcnt++; - if (! tty_hung_up_p(filp)) - portp->port.count--; - spin_unlock_irqrestore(&stli_lock, flags); - - for (;;) { - stli_mkasysigs(&portp->asig, 1, 1); - if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS, - &portp->asig, sizeof(asysigs_t), 0)) < 0) - break; - if (tty_hung_up_p(filp) || - ((portp->port.flags & ASYNC_INITIALIZED) == 0)) { - if (portp->port.flags & ASYNC_HUP_NOTIFY) - rc = -EBUSY; - else - rc = -ERESTARTSYS; - break; - } - if (((portp->port.flags & ASYNC_CLOSING) == 0) && - (doclocal || (portp->sigs & TIOCM_CD))) { - break; - } - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - interruptible_sleep_on(&portp->port.open_wait); - } - - spin_lock_irqsave(&stli_lock, flags); - if (! tty_hung_up_p(filp)) - portp->port.count++; - portp->openwaitcnt--; - spin_unlock_irqrestore(&stli_lock, flags); + struct stliport *portp = container_of(port, struct stliport, port); + return (portp->sigs & TIOCM_CD) ? 1 : 0; +} - return rc; +static void stli_raise_dtr_rts(struct tty_port *port) +{ + struct stliport *portp = container_of(port, struct stliport, port); + struct stlibrd *brdp = stli_brds[portp->brdnr]; + stli_mkasysigs(&portp->asig, 1, 1); + if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, + sizeof(asysigs_t), 0) < 0) + printk(KERN_WARNING "istallion: dtr raise failed.\n"); } + /*****************************************************************************/ /* @@ -1550,7 +1462,7 @@ static int stli_getserial(struct stliport *portp, struct serial_struct __user *s sio.irq = 0; sio.flags = portp->port.flags; sio.baud_base = portp->baud_base; - sio.close_delay = portp->close_delay; + sio.close_delay = portp->port.close_delay; sio.closing_wait = portp->closing_wait; sio.custom_divisor = portp->custom_divisor; sio.xmit_fifo_size = 0; @@ -1582,7 +1494,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s return -EFAULT; if (!capable(CAP_SYS_ADMIN)) { if ((sio.baud_base != portp->baud_base) || - (sio.close_delay != portp->close_delay) || + (sio.close_delay != portp->port.close_delay) || ((sio.flags & ~ASYNC_USR_MASK) != (portp->port.flags & ~ASYNC_USR_MASK))) return -EPERM; @@ -1591,7 +1503,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) | (sio.flags & ASYNC_USR_MASK); portp->baud_base = sio.baud_base; - portp->close_delay = sio.close_delay; + portp->port.close_delay = sio.close_delay; portp->closing_wait = sio.closing_wait; portp->custom_divisor = sio.custom_divisor; @@ -1821,6 +1733,7 @@ static void stli_hangup(struct tty_struct *tty) { struct stliport *portp; struct stlibrd *brdp; + struct tty_port *port; unsigned long flags; portp = tty->driver_data; @@ -1831,8 +1744,11 @@ static void stli_hangup(struct tty_struct *tty) brdp = stli_brds[portp->brdnr]; if (brdp == NULL) return; + port = &portp->port; - portp->port.flags &= ~ASYNC_INITIALIZED; + spin_lock_irqsave(&port->lock, flags); + port->flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->lock, flags); if (!test_bit(ST_CLOSING, &portp->state)) stli_rawclose(brdp, portp, 0, 0); @@ -1853,12 +1769,9 @@ static void stli_hangup(struct tty_struct *tty) clear_bit(ST_TXBUSY, &portp->state); clear_bit(ST_RXSTOP, &portp->state); set_bit(TTY_IO_ERROR, &tty->flags); - tty_port_tty_set(&portp->port, NULL); - portp->port.flags &= ~ASYNC_NORMAL_ACTIVE; - portp->port.count = 0; spin_unlock_irqrestore(&stli_lock, flags); - wake_up_interruptible(&portp->port.open_wait); + tty_port_hangup(port); } /*****************************************************************************/ @@ -2132,7 +2045,7 @@ static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigne unsigned char __iomem *bits; if (test_bit(ST_CMDING, &portp->state)) { - printk(KERN_ERR "STALLION: command already busy, cmd=%x!\n", + printk(KERN_ERR "istallion: command already busy, cmd=%x!\n", (int) cmd); return; } @@ -2692,16 +2605,17 @@ static int stli_initports(struct stlibrd *brdp) for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) { portp = kzalloc(sizeof(struct stliport), GFP_KERNEL); if (!portp) { - printk("STALLION: failed to allocate port structure\n"); + printk(KERN_WARNING "istallion: failed to allocate port structure\n"); continue; } tty_port_init(&portp->port); + portp->port.ops = &stli_port_ops; portp->magic = STLI_PORTMAGIC; portp->portnr = i; portp->brdnr = brdp->brdnr; portp->panelnr = panelnr; portp->baud_base = STL_BAUDBASE; - portp->close_delay = STL_CLOSEDELAY; + portp->port.close_delay = STL_CLOSEDELAY; portp->closing_wait = 30 * HZ; init_waitqueue_head(&portp->port.open_wait); init_waitqueue_head(&portp->port.close_wait); @@ -2758,7 +2672,7 @@ static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offse unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2832,7 +2746,7 @@ static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long off unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2884,7 +2798,7 @@ static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long off unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2929,7 +2843,7 @@ static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long of unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), board=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2994,7 +2908,7 @@ static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offse void __iomem *ptr; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -3060,7 +2974,7 @@ static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offs unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -3499,7 +3413,7 @@ static int stli_startbrd(struct stlibrd *brdp) #endif if (nrdevs < (brdp->nrports + 1)) { - printk(KERN_ERR "STALLION: slave failed to allocate memory for " + printk(KERN_ERR "istallion: slave failed to allocate memory for " "all devices, devices=%d\n", nrdevs); brdp->nrports = nrdevs - 1; } @@ -3509,13 +3423,13 @@ static int stli_startbrd(struct stlibrd *brdp) brdp->bitsize = (nrdevs + 7) / 8; memoff = readl(&hdrp->memp); if (memoff > brdp->memsize) { - printk(KERN_ERR "STALLION: corrupted shared memory region?\n"); + printk(KERN_ERR "istallion: corrupted shared memory region?\n"); rc = -EIO; goto stli_donestartup; } memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff); if (readw(&memp->dtype) != TYP_ASYNCTRL) { - printk(KERN_ERR "STALLION: no slave control device found\n"); + printk(KERN_ERR "istallion: no slave control device found\n"); goto stli_donestartup; } memp++; @@ -3600,7 +3514,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp) retval = stli_initonb(brdp); break; default: - printk(KERN_ERR "STALLION: board=%d is unknown board " + printk(KERN_ERR "istallion: board=%d is unknown board " "type=%d\n", brdp->brdnr, brdp->brdtype); retval = -ENODEV; } @@ -3609,7 +3523,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp) return retval; stli_initports(brdp); - printk(KERN_INFO "STALLION: %s found, board=%d io=%x mem=%x " + printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x " "nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype], brdp->brdnr, brdp->iobase, (int) brdp->memaddr, brdp->nrpanels, brdp->nrports); @@ -3703,7 +3617,7 @@ static int stli_eisamemprobe(struct stlibrd *brdp) if (! foundit) { brdp->memaddr = 0; brdp->membase = NULL; - printk(KERN_ERR "STALLION: failed to probe shared memory " + printk(KERN_ERR "istallion: failed to probe shared memory " "region for %s in EISA slot=%d\n", stli_brdnames[brdp->brdtype], (brdp->iobase >> 12)); return -ENODEV; @@ -3848,7 +3762,7 @@ static int __devinit stli_pciprobe(struct pci_dev *pdev, mutex_lock(&stli_brdslock); brdnr = stli_getbrdnr(); if (brdnr < 0) { - printk(KERN_INFO "STALLION: too many boards found, " + printk(KERN_INFO "istallion: too many boards found, " "maximum supported %d\n", STL_MAXBRDS); mutex_unlock(&stli_brdslock); retval = -EIO; @@ -3920,7 +3834,7 @@ static struct stlibrd *stli_allocbrd(void) brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL); if (!brdp) { - printk(KERN_ERR "STALLION: failed to allocate memory " + printk(KERN_ERR "istallion: failed to allocate memory " "(size=%Zd)\n", sizeof(struct stlibrd)); return NULL; } @@ -4518,6 +4432,11 @@ static const struct tty_operations stli_ops = { .tiocmset = stli_tiocmset, }; +static const struct tty_port_operations stli_port_ops = { + .carrier_raised = stli_carrier_raised, + .raise_dtr_rts = stli_raise_dtr_rts, +}; + /*****************************************************************************/ /* * Loadable module initialization stuff. @@ -4554,7 +4473,7 @@ static int __init istallion_module_init(void) stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL); if (!stli_txcookbuf) { - printk(KERN_ERR "STALLION: failed to allocate memory " + printk(KERN_ERR "istallion: failed to allocate memory " "(size=%d)\n", STLI_TXBUFSIZE); retval = -ENOMEM; goto err; @@ -4579,7 +4498,7 @@ static int __init istallion_module_init(void) retval = tty_register_driver(stli_serial); if (retval) { - printk(KERN_ERR "STALLION: failed to register serial driver\n"); + printk(KERN_ERR "istallion: failed to register serial driver\n"); goto err_ttyput; } @@ -4593,7 +4512,7 @@ static int __init istallion_module_init(void) */ retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem); if (retval) { - printk(KERN_ERR "STALLION: failed to register serial memory " + printk(KERN_ERR "istallion: failed to register serial memory " "device\n"); goto err_deinit; } diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 12d327a2c9ba..8b0da97d5293 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -206,6 +206,7 @@ static void moxa_poll(unsigned long); static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); static void moxa_setup_empty_event(struct tty_struct *); static void moxa_shut_down(struct tty_struct *); +static int moxa_carrier_raised(struct tty_port *); /* * moxa board interface functions: */ @@ -405,6 +406,10 @@ static const struct tty_operations moxa_ops = { .tiocmset = moxa_tiocmset, }; +static const struct tty_port_operations moxa_port_ops = { + .carrier_raised = moxa_carrier_raised, +}; + static struct tty_driver *moxaDriver; static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); static DEFINE_SPINLOCK(moxa_lock); @@ -826,6 +831,7 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev) for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) { tty_port_init(&p->port); + p->port.ops = &moxa_port_ops; p->type = PORT_16550A; p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; } @@ -1115,15 +1121,27 @@ static void moxa_close_port(struct tty_struct *tty) tty_port_tty_set(&ch->port, NULL); } +static int moxa_carrier_raised(struct tty_port *port) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + int dcd; + + spin_lock_bh(&moxa_lock); + dcd = ch->DCDState; + spin_unlock_bh(&moxa_lock); + return dcd; +} + static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, struct moxa_port *ch) { + struct tty_port *port = &ch->port; DEFINE_WAIT(wait); int retval = 0; u8 dcd; while (1) { - prepare_to_wait(&ch->port.open_wait, &wait, TASK_INTERRUPTIBLE); + prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp)) { #ifdef SERIAL_DO_RESTART retval = -ERESTARTSYS; @@ -1132,9 +1150,7 @@ static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, #endif break; } - spin_lock_bh(&moxa_lock); - dcd = ch->DCDState; - spin_unlock_bh(&moxa_lock); + dcd = tty_port_carrier_raised(port); if (dcd) break; @@ -1144,7 +1160,7 @@ static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, } schedule(); } - finish_wait(&ch->port.open_wait, &wait); + finish_wait(&port->open_wait, &wait); return retval; } diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 047766915411..402c9f217f83 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -541,74 +541,21 @@ static unsigned char mxser_get_msr(int baseaddr, int mode, int port) return status; } -static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, - struct mxser_port *port) +static int mxser_carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - unsigned long flags; - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - test_bit(TTY_IO_ERROR, &tty->flags)) { - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } + struct mxser_port *mp = container_of(port, struct mxser_port, port); + return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; +} - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; +static void mxser_raise_dtr_rts(struct tty_port *port) +{ + struct mxser_port *mp = container_of(port, struct mxser_port, port); + unsigned long flags; - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->port.count is dropped by one, so that - * mxser_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->port.open_wait, &wait); - - spin_lock_irqsave(&port->slock, flags); - if (!tty_hung_up_p(filp)) - port->port.count--; - spin_unlock_irqrestore(&port->slock, flags); - port->port.blocked_open++; - while (1) { - spin_lock_irqsave(&port->slock, flags); - outb(inb(port->ioaddr + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR); - spin_unlock_irqrestore(&port->slock, flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->port.flags & ASYNC_CLOSING) && - (do_clocal || - (inb(port->ioaddr + UART_MSR) & UART_MSR_DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->port.count++; - port->port.blocked_open--; - if (retval) - return retval; - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + spin_lock_irqsave(&mp->slock, flags); + outb(inb(mp->ioaddr + UART_MCR) | + UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + spin_unlock_irqrestore(&mp->slock, flags); } static int mxser_set_baud(struct tty_struct *tty, long newspd) @@ -1087,14 +1034,14 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) /* * Start up serial port */ - spin_lock_irqsave(&info->slock, flags); + spin_lock_irqsave(&info->port.lock, flags); info->port.count++; - spin_unlock_irqrestore(&info->slock, flags); + spin_unlock_irqrestore(&info->port.lock, flags); retval = mxser_startup(tty); if (retval) return retval; - retval = mxser_block_til_ready(tty, filp, info); + retval = tty_port_block_til_ready(&info->port, tty, filp); if (retval) return retval; @@ -1133,58 +1080,27 @@ static void mxser_flush_buffer(struct tty_struct *tty) static void mxser_close(struct tty_struct *tty, struct file *filp) { struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; unsigned long timeout; - unsigned long flags; if (tty->index == MXSER_PORTS) return; if (!info) return; - spin_lock_irqsave(&info->slock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->port.count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "mxser_close: bad serial port count; " - "tty->count is 1, info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - if (--info->port.count < 0) { - printk(KERN_ERR "mxser_close: bad serial port count for " - "ttys%d: %d\n", tty->index, info->port.count); - info->port.count = 0; - } - if (info->port.count) { - spin_unlock_irqrestore(&info->slock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - info->port.flags |= ASYNC_CLOSING; - spin_unlock_irqrestore(&info->slock, flags); + /* * Save the termios structure, since this port may have * separate termios for callout and dialin. + * + * FIXME: Can this go ? */ if (info->port.flags & ASYNC_NORMAL_ACTIVE) info->normal_termios = *tty->termios; /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->port.closing_wait); - /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the @@ -1209,19 +1125,12 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) } } mxser_shutdown(tty); - mxser_flush_buffer(tty); - tty_ldisc_flush(tty); - - tty->closing = 0; - tty_port_tty_set(&info->port, NULL); - if (info->port.blocked_open) { - if (info->port.close_delay) - schedule_timeout_interruptible(info->port.close_delay); - wake_up_interruptible(&info->port.open_wait); - } - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + /* Right now the tty_port set is done outside of the close_end helper + as we don't yet have everyone using refcounts */ + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) @@ -2146,10 +2055,7 @@ static void mxser_hangup(struct tty_struct *tty) mxser_flush_buffer(tty); mxser_shutdown(tty); - info->port.count = 0; - info->port.flags &= ~ASYNC_NORMAL_ACTIVE; - tty_port_tty_set(&info->port, NULL); - wake_up_interruptible(&info->port.open_wait); + tty_port_hangup(&info->port); } /* @@ -2449,6 +2355,11 @@ static const struct tty_operations mxser_ops = { .tiocmset = mxser_tiocmset, }; +struct tty_port_operations mxser_port_ops = { + .carrier_raised = mxser_carrier_raised, + .raise_dtr_rts = mxser_raise_dtr_rts, +}; + /* * The MOXA Smartio/Industio serial driver boot-time initialization code! */ @@ -2482,6 +2393,7 @@ static int __devinit mxser_initbrd(struct mxser_board *brd, for (i = 0; i < brd->info->nports; i++) { info = &brd->ports[i]; tty_port_init(&info->port); + info->port.ops = &mxser_port_ops; info->board = brd; info->stop_rx = 0; info->ldisc_stop_rx = 0; diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index 4a8215a89ad3..d2e93e343226 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -1003,7 +1003,7 @@ static int r3964_open(struct tty_struct *tty) static void r3964_close(struct tty_struct *tty) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_client_info *pClient, *pNext; struct r3964_message *pMsg; struct r3964_block_header *pHeader, *pNextHeader; @@ -1058,7 +1058,7 @@ static void r3964_close(struct tty_struct *tty) static ssize_t r3964_read(struct tty_struct *tty, struct file *file, unsigned char __user * buf, size_t nr) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_client_info *pClient; struct r3964_message *pMsg; struct r3964_client_message theMsg; @@ -1113,7 +1113,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, static ssize_t r3964_write(struct tty_struct *tty, struct file *file, const unsigned char *data, size_t count) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_block_header *pHeader; struct r3964_client_info *pClient; unsigned char *new_data; @@ -1182,7 +1182,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, static int r3964_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; if (pInfo == NULL) return -EINVAL; switch (cmd) { @@ -1216,7 +1216,7 @@ static void r3964_set_termios(struct tty_struct *tty, struct ktermios *old) static unsigned int r3964_poll(struct tty_struct *tty, struct file *file, struct poll_table_struct *wait) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_client_info *pClient; struct r3964_message *pMsg = NULL; unsigned long flags; @@ -1241,7 +1241,7 @@ static unsigned int r3964_poll(struct tty_struct *tty, struct file *file, static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; const unsigned char *p; char *f, flags = 0; int i; diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index efbfe9612658..f6f0e4ec2b51 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -47,8 +47,8 @@ #include <linux/bitops.h> #include <linux/audit.h> #include <linux/file.h> +#include <linux/uaccess.h> -#include <asm/uaccess.h> #include <asm/system.h> /* number of characters left in xmit buffer before select has we have room */ @@ -62,6 +62,17 @@ #define TTY_THRESHOLD_THROTTLE 128 /* now based on remaining room */ #define TTY_THRESHOLD_UNTHROTTLE 128 +/* + * Special byte codes used in the echo buffer to represent operations + * or special handling of characters. Bytes in the echo buffer that + * are not part of such special blocks are treated as normal character + * codes. + */ +#define ECHO_OP_START 0xff +#define ECHO_OP_MOVE_BACK_COL 0x80 +#define ECHO_OP_SET_CANON_COL 0x81 +#define ECHO_OP_ERASE_TAB 0x82 + static inline unsigned char *alloc_buf(void) { gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; @@ -169,6 +180,7 @@ static void check_unthrottle(struct tty_struct *tty) * * Locking: tty_read_lock for read fields. */ + static void reset_buffer_flags(struct tty_struct *tty) { unsigned long flags; @@ -176,6 +188,11 @@ static void reset_buffer_flags(struct tty_struct *tty) spin_lock_irqsave(&tty->read_lock, flags); tty->read_head = tty->read_tail = tty->read_cnt = 0; spin_unlock_irqrestore(&tty->read_lock, flags); + + mutex_lock(&tty->echo_lock); + tty->echo_pos = tty->echo_cnt = tty->echo_overrun = 0; + mutex_unlock(&tty->echo_lock); + tty->canon_head = tty->canon_data = tty->erasing = 0; memset(&tty->read_flags, 0, sizeof tty->read_flags); n_tty_set_room(tty); @@ -266,89 +283,118 @@ static inline int is_continuation(unsigned char c, struct tty_struct *tty) } /** - * opost - output post processor + * do_output_char - output one character * @c: character (or partial unicode symbol) * @tty: terminal device + * @space: space available in tty driver write buffer * - * Perform OPOST processing. Returns -1 when the output device is - * full and the character must be retried. Note that Linux currently - * ignores TABDLY, CRDLY, VTDLY, FFDLY and NLDLY. They simply aren't - * relevant in the world today. If you ever need them, add them here. + * This is a helper function that handles one output character + * (including special characters like TAB, CR, LF, etc.), + * putting the results in the tty driver's write buffer. + * + * Note that Linux currently ignores TABDLY, CRDLY, VTDLY, FFDLY + * and NLDLY. They simply aren't relevant in the world today. + * If you ever need them, add them here. + * + * Returns the number of bytes of buffer space used or -1 if + * no space left. * - * Called from both the receive and transmit sides and can be called - * re-entrantly. Relies on lock_kernel() for tty->column state. + * Locking: should be called under the output_lock to protect + * the column state and space left in the buffer */ -static int opost(unsigned char c, struct tty_struct *tty) +static int do_output_char(unsigned char c, struct tty_struct *tty, int space) { - int space, spaces; + int spaces; - space = tty_write_room(tty); if (!space) return -1; - lock_kernel(); - if (O_OPOST(tty)) { - switch (c) { - case '\n': - if (O_ONLRET(tty)) - tty->column = 0; - if (O_ONLCR(tty)) { - if (space < 2) { - unlock_kernel(); - return -1; - } - tty_put_char(tty, '\r'); - tty->column = 0; - } - tty->canon_column = tty->column; - break; - case '\r': - if (O_ONOCR(tty) && tty->column == 0) { - unlock_kernel(); - return 0; - } - if (O_OCRNL(tty)) { - c = '\n'; - if (O_ONLRET(tty)) - tty->canon_column = tty->column = 0; - break; - } + switch (c) { + case '\n': + if (O_ONLRET(tty)) + tty->column = 0; + if (O_ONLCR(tty)) { + if (space < 2) + return -1; tty->canon_column = tty->column = 0; + tty_put_char(tty, '\r'); + tty_put_char(tty, c); + return 2; + } + tty->canon_column = tty->column; + break; + case '\r': + if (O_ONOCR(tty) && tty->column == 0) + return 0; + if (O_OCRNL(tty)) { + c = '\n'; + if (O_ONLRET(tty)) + tty->canon_column = tty->column = 0; break; - case '\t': - spaces = 8 - (tty->column & 7); - if (O_TABDLY(tty) == XTABS) { - if (space < spaces) { - unlock_kernel(); - return -1; - } - tty->column += spaces; - tty->ops->write(tty, " ", spaces); - unlock_kernel(); - return 0; - } + } + tty->canon_column = tty->column = 0; + break; + case '\t': + spaces = 8 - (tty->column & 7); + if (O_TABDLY(tty) == XTABS) { + if (space < spaces) + return -1; tty->column += spaces; - break; - case '\b': - if (tty->column > 0) - tty->column--; - break; - default: + tty->ops->write(tty, " ", spaces); + return spaces; + } + tty->column += spaces; + break; + case '\b': + if (tty->column > 0) + tty->column--; + break; + default: + if (!iscntrl(c)) { if (O_OLCUC(tty)) c = toupper(c); - if (!iscntrl(c) && !is_continuation(c, tty)) + if (!is_continuation(c, tty)) tty->column++; - break; } + break; } + tty_put_char(tty, c); - unlock_kernel(); - return 0; + return 1; } /** - * opost_block - block postprocess + * process_output - output post processor + * @c: character (or partial unicode symbol) + * @tty: terminal device + * + * Perform OPOST processing. Returns -1 when the output device is + * full and the character must be retried. + * + * Locking: output_lock to protect column state and space left + * (also, this is called from n_tty_write under the + * tty layer write lock) + */ + +static int process_output(unsigned char c, struct tty_struct *tty) +{ + int space, retval; + + mutex_lock(&tty->output_lock); + + space = tty_write_room(tty); + retval = do_output_char(c, tty, space); + + mutex_unlock(&tty->output_lock); + if (retval < 0) + return -1; + else + return 0; +} + +/** + * process_output_block - block post processor * @tty: terminal device * @inbuf: user buffer * @nr: number of bytes @@ -358,26 +404,32 @@ static int opost(unsigned char c, struct tty_struct *tty) * the simple cases normally found and helps to generate blocks of * symbols for the console driver and thus improve performance. * - * Called from n_tty_write under the tty layer write lock. Relies - * on lock_kernel for the tty->column state. + * Locking: output_lock to protect column state and space left + * (also, this is called from n_tty_write under the + * tty layer write lock) */ -static ssize_t opost_block(struct tty_struct *tty, - const unsigned char *buf, unsigned int nr) +static ssize_t process_output_block(struct tty_struct *tty, + const unsigned char *buf, unsigned int nr) { int space; int i; const unsigned char *cp; + mutex_lock(&tty->output_lock); + space = tty_write_room(tty); - if (!space) + if (!space) { + mutex_unlock(&tty->output_lock); return 0; + } if (nr > space) nr = space; - lock_kernel(); for (i = 0, cp = buf; i < nr; i++, cp++) { - switch (*cp) { + unsigned char c = *cp; + + switch (c) { case '\n': if (O_ONLRET(tty)) tty->column = 0; @@ -399,54 +451,403 @@ static ssize_t opost_block(struct tty_struct *tty, tty->column--; break; default: - if (O_OLCUC(tty)) - goto break_out; - if (!iscntrl(*cp)) - tty->column++; + if (!iscntrl(c)) { + if (O_OLCUC(tty)) + goto break_out; + if (!is_continuation(c, tty)) + tty->column++; + } break; } } break_out: - if (tty->ops->flush_chars) - tty->ops->flush_chars(tty); i = tty->ops->write(tty, buf, i); - unlock_kernel(); + + mutex_unlock(&tty->output_lock); return i; } +/** + * process_echoes - write pending echo characters + * @tty: terminal device + * + * Write previously buffered echo (and other ldisc-generated) + * characters to the tty. + * + * Characters generated by the ldisc (including echoes) need to + * be buffered because the driver's write buffer can fill during + * heavy program output. Echoing straight to the driver will + * often fail under these conditions, causing lost characters and + * resulting mismatches of ldisc state information. + * + * Since the ldisc state must represent the characters actually sent + * to the driver at the time of the write, operations like certain + * changes in column state are also saved in the buffer and executed + * here. + * + * A circular fifo buffer is used so that the most recent characters + * are prioritized. Also, when control characters are echoed with a + * prefixed "^", the pair is treated atomically and thus not separated. + * + * Locking: output_lock to protect column state and space left, + * echo_lock to protect the echo buffer + */ + +static void process_echoes(struct tty_struct *tty) +{ + int space, nr; + unsigned char c; + unsigned char *cp, *buf_end; + + if (!tty->echo_cnt) + return; + + mutex_lock(&tty->output_lock); + mutex_lock(&tty->echo_lock); + + space = tty_write_room(tty); + + buf_end = tty->echo_buf + N_TTY_BUF_SIZE; + cp = tty->echo_buf + tty->echo_pos; + nr = tty->echo_cnt; + while (nr > 0) { + c = *cp; + if (c == ECHO_OP_START) { + unsigned char op; + unsigned char *opp; + int no_space_left = 0; + + /* + * If the buffer byte is the start of a multi-byte + * operation, get the next byte, which is either the + * op code or a control character value. + */ + opp = cp + 1; + if (opp == buf_end) + opp -= N_TTY_BUF_SIZE; + op = *opp; + + switch (op) { + unsigned int num_chars, num_bs; + + case ECHO_OP_ERASE_TAB: + if (++opp == buf_end) + opp -= N_TTY_BUF_SIZE; + num_chars = *opp; + + /* + * Determine how many columns to go back + * in order to erase the tab. + * This depends on the number of columns + * used by other characters within the tab + * area. If this (modulo 8) count is from + * the start of input rather than from a + * previous tab, we offset by canon column. + * Otherwise, tab spacing is normal. + */ + if (!(num_chars & 0x80)) + num_chars += tty->canon_column; + num_bs = 8 - (num_chars & 7); + + if (num_bs > space) { + no_space_left = 1; + break; + } + space -= num_bs; + while (num_bs--) { + tty_put_char(tty, '\b'); + if (tty->column > 0) + tty->column--; + } + cp += 3; + nr -= 3; + break; + + case ECHO_OP_SET_CANON_COL: + tty->canon_column = tty->column; + cp += 2; + nr -= 2; + break; + + case ECHO_OP_MOVE_BACK_COL: + if (tty->column > 0) + tty->column--; + cp += 2; + nr -= 2; + break; + + case ECHO_OP_START: + /* This is an escaped echo op start code */ + if (!space) { + no_space_left = 1; + break; + } + tty_put_char(tty, ECHO_OP_START); + tty->column++; + space--; + cp += 2; + nr -= 2; + break; + + default: + if (iscntrl(op)) { + if (L_ECHOCTL(tty)) { + /* + * Ensure there is enough space + * for the whole ctrl pair. + */ + if (space < 2) { + no_space_left = 1; + break; + } + tty_put_char(tty, '^'); + tty_put_char(tty, op ^ 0100); + tty->column += 2; + space -= 2; + } else { + if (!space) { + no_space_left = 1; + break; + } + tty_put_char(tty, op); + space--; + } + } + /* + * If above falls through, this was an + * undefined op. + */ + cp += 2; + nr -= 2; + } + + if (no_space_left) + break; + } else { + int retval; + + retval = do_output_char(c, tty, space); + if (retval < 0) + break; + space -= retval; + cp += 1; + nr -= 1; + } + + /* When end of circular buffer reached, wrap around */ + if (cp >= buf_end) + cp -= N_TTY_BUF_SIZE; + } + + if (nr == 0) { + tty->echo_pos = 0; + tty->echo_cnt = 0; + tty->echo_overrun = 0; + } else { + int num_processed = tty->echo_cnt - nr; + tty->echo_pos += num_processed; + tty->echo_pos &= N_TTY_BUF_SIZE - 1; + tty->echo_cnt = nr; + if (num_processed > 0) + tty->echo_overrun = 0; + } + + mutex_unlock(&tty->echo_lock); + mutex_unlock(&tty->output_lock); + + if (tty->ops->flush_chars) + tty->ops->flush_chars(tty); +} /** - * echo_char - echo characters + * add_echo_byte - add a byte to the echo buffer + * @c: unicode byte to echo + * @tty: terminal device + * + * Add a character or operation byte to the echo buffer. + * + * Should be called under the echo lock to protect the echo buffer. + */ + +static void add_echo_byte(unsigned char c, struct tty_struct *tty) +{ + int new_byte_pos; + + if (tty->echo_cnt == N_TTY_BUF_SIZE) { + /* Circular buffer is already at capacity */ + new_byte_pos = tty->echo_pos; + + /* + * Since the buffer start position needs to be advanced, + * be sure to step by a whole operation byte group. + */ + if (tty->echo_buf[tty->echo_pos] == ECHO_OP_START) { + if (tty->echo_buf[(tty->echo_pos + 1) & + (N_TTY_BUF_SIZE - 1)] == + ECHO_OP_ERASE_TAB) { + tty->echo_pos += 3; + tty->echo_cnt -= 2; + } else { + tty->echo_pos += 2; + tty->echo_cnt -= 1; + } + } else { + tty->echo_pos++; + } + tty->echo_pos &= N_TTY_BUF_SIZE - 1; + + tty->echo_overrun = 1; + } else { + new_byte_pos = tty->echo_pos + tty->echo_cnt; + new_byte_pos &= N_TTY_BUF_SIZE - 1; + tty->echo_cnt++; + } + + tty->echo_buf[new_byte_pos] = c; +} + +/** + * echo_move_back_col - add operation to move back a column + * @tty: terminal device + * + * Add an operation to the echo buffer to move back one column. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_move_back_col(struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty); + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_set_canon_col - add operation to set the canon column + * @tty: terminal device + * + * Add an operation to the echo buffer to set the canon column + * to the current column. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_set_canon_col(struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_SET_CANON_COL, tty); + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_erase_tab - add operation to erase a tab + * @num_chars: number of character columns already used + * @after_tab: true if num_chars starts after a previous tab + * @tty: terminal device + * + * Add an operation to the echo buffer to erase a tab. + * + * Called by the eraser function, which knows how many character + * columns have been used since either a previous tab or the start + * of input. This information will be used later, along with + * canon column (if applicable), to go back the correct number + * of columns. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_erase_tab(unsigned int num_chars, int after_tab, + struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_ERASE_TAB, tty); + + /* We only need to know this modulo 8 (tab spacing) */ + num_chars &= 7; + + /* Set the high bit as a flag if num_chars is after a previous tab */ + if (after_tab) + num_chars |= 0x80; + + add_echo_byte(num_chars, tty); + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_char_raw - echo a character raw * @c: unicode byte to echo * @tty: terminal device * * Echo user input back onto the screen. This must be called only when * L_ECHO(tty) is true. Called from the driver receive_buf path. * - * Relies on BKL for tty column locking + * This variant does not treat control characters specially. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_char_raw(unsigned char c, struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + if (c == ECHO_OP_START) { + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_START, tty); + } else { + add_echo_byte(c, tty); + } + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_char - echo a character + * @c: unicode byte to echo + * @tty: terminal device + * + * Echo user input back onto the screen. This must be called only when + * L_ECHO(tty) is true. Called from the driver receive_buf path. + * + * This variant tags control characters to be possibly echoed as + * as "^X" (where X is the letter representing the control char). + * + * Locking: echo_lock to protect the echo buffer */ static void echo_char(unsigned char c, struct tty_struct *tty) { - if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t') { - tty_put_char(tty, '^'); - tty_put_char(tty, c ^ 0100); - tty->column += 2; - } else - opost(c, tty); + mutex_lock(&tty->echo_lock); + + if (c == ECHO_OP_START) { + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_START, tty); + } else { + if (iscntrl(c) && c != '\t') + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(c, tty); + } + + mutex_unlock(&tty->echo_lock); } /** - * finsh_erasing - complete erase + * finish_erasing - complete erase * @tty: tty doing the erase - * - * Relies on BKL for tty column locking */ + static inline void finish_erasing(struct tty_struct *tty) { if (tty->erasing) { - tty_put_char(tty, '/'); - tty->column++; + echo_char_raw('/', tty); tty->erasing = 0; } } @@ -460,7 +861,7 @@ static inline void finish_erasing(struct tty_struct *tty) * present in the stream from the driver layer. Handles the complexities * of UTF-8 multibyte symbols. * - * Locking: read_lock for tty buffers, BKL for column/erasing state + * Locking: read_lock for tty buffers */ static void eraser(unsigned char c, struct tty_struct *tty) @@ -471,7 +872,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) /* FIXME: locking needed ? */ if (tty->read_head == tty->canon_head) { - /* opost('\a', tty); */ /* what do you think? */ + /* process_output('\a', tty); */ /* what do you think? */ return; } if (c == ERASE_CHAR(tty)) @@ -497,7 +898,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) echo_char(KILL_CHAR(tty), tty); /* Add a newline if ECHOK is on and ECHOKE is off. */ if (L_ECHOK(tty)) - opost('\n', tty); + echo_char_raw('\n', tty); return; } kill_type = KILL; @@ -533,67 +934,61 @@ static void eraser(unsigned char c, struct tty_struct *tty) if (L_ECHO(tty)) { if (L_ECHOPRT(tty)) { if (!tty->erasing) { - tty_put_char(tty, '\\'); - tty->column++; + echo_char_raw('\\', tty); tty->erasing = 1; } /* if cnt > 1, output a multi-byte character */ echo_char(c, tty); while (--cnt > 0) { head = (head+1) & (N_TTY_BUF_SIZE-1); - tty_put_char(tty, tty->read_buf[head]); + echo_char_raw(tty->read_buf[head], tty); + echo_move_back_col(tty); } } else if (kill_type == ERASE && !L_ECHOE(tty)) { echo_char(ERASE_CHAR(tty), tty); } else if (c == '\t') { - unsigned int col = tty->canon_column; - unsigned long tail = tty->canon_head; - - /* Find the column of the last char. */ - while (tail != tty->read_head) { + unsigned int num_chars = 0; + int after_tab = 0; + unsigned long tail = tty->read_head; + + /* + * Count the columns used for characters + * since the start of input or after a + * previous tab. + * This info is used to go back the correct + * number of columns. + */ + while (tail != tty->canon_head) { + tail = (tail-1) & (N_TTY_BUF_SIZE-1); c = tty->read_buf[tail]; - if (c == '\t') - col = (col | 7) + 1; - else if (iscntrl(c)) { + if (c == '\t') { + after_tab = 1; + break; + } else if (iscntrl(c)) { if (L_ECHOCTL(tty)) - col += 2; - } else if (!is_continuation(c, tty)) - col++; - tail = (tail+1) & (N_TTY_BUF_SIZE-1); - } - - /* should never happen */ - if (tty->column > 0x80000000) - tty->column = 0; - - /* Now backup to that column. */ - while (tty->column > col) { - /* Can't use opost here. */ - tty_put_char(tty, '\b'); - if (tty->column > 0) - tty->column--; + num_chars += 2; + } else if (!is_continuation(c, tty)) { + num_chars++; + } } + echo_erase_tab(num_chars, after_tab, tty); } else { if (iscntrl(c) && L_ECHOCTL(tty)) { - tty_put_char(tty, '\b'); - tty_put_char(tty, ' '); - tty_put_char(tty, '\b'); - if (tty->column > 0) - tty->column--; + echo_char_raw('\b', tty); + echo_char_raw(' ', tty); + echo_char_raw('\b', tty); } if (!iscntrl(c) || L_ECHOCTL(tty)) { - tty_put_char(tty, '\b'); - tty_put_char(tty, ' '); - tty_put_char(tty, '\b'); - if (tty->column > 0) - tty->column--; + echo_char_raw('\b', tty); + echo_char_raw(' ', tty); + echo_char_raw('\b', tty); } } } if (kill_type == ERASE) break; } - if (tty->read_head == tty->canon_head) + if (tty->read_head == tty->canon_head && L_ECHO(tty)) finish_erasing(tty); } @@ -712,6 +1107,7 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty, static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) { unsigned long flags; + int parmrk; if (tty->raw) { put_tty_queue(c, tty); @@ -721,18 +1117,21 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (I_ISTRIP(tty)) c &= 0x7f; if (I_IUCLC(tty) && L_IEXTEN(tty)) - c=tolower(c); + c = tolower(c); if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && - ((I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty)) || - c == INTR_CHAR(tty) || c == QUIT_CHAR(tty) || c == SUSP_CHAR(tty))) + I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) && + c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) { start_tty(tty); + process_echoes(tty); + } if (tty->closing) { if (I_IXON(tty)) { - if (c == START_CHAR(tty)) + if (c == START_CHAR(tty)) { start_tty(tty); - else if (c == STOP_CHAR(tty)) + process_echoes(tty); + } else if (c == STOP_CHAR(tty)) stop_tty(tty); } return; @@ -745,19 +1144,23 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) * up. */ if (!test_bit(c, tty->process_char_map) || tty->lnext) { - finish_erasing(tty); tty->lnext = 0; + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; + if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { + /* beep if no space */ + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } if (L_ECHO(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) { - tty_put_char(tty, '\a'); /* beep if no space */ - return; - } + finish_erasing(tty); /* Record the column of first canon char. */ if (tty->canon_head == tty->read_head) - tty->canon_column = tty->column; + echo_set_canon_col(tty); echo_char(c, tty); + process_echoes(tty); } - if (I_PARMRK(tty) && c == (unsigned char) '\377') + if (parmrk) put_tty_queue(c, tty); put_tty_queue(c, tty); return; @@ -766,6 +1169,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (I_IXON(tty)) { if (c == START_CHAR(tty)) { start_tty(tty); + process_echoes(tty); return; } if (c == STOP_CHAR(tty)) { @@ -786,7 +1190,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (c == SUSP_CHAR(tty)) { send_signal: /* - * Echo character, and then send the signal. * Note that we do not use isig() here because we want * the order to be: * 1) flush, 2) echo, 3) signal @@ -795,8 +1198,12 @@ send_signal: n_tty_flush_buffer(tty); tty_driver_flush_buffer(tty); } - if (L_ECHO(tty)) + if (I_IXON(tty)) + start_tty(tty); + if (L_ECHO(tty)) { echo_char(c, tty); + process_echoes(tty); + } if (tty->pgrp) kill_pgrp(tty->pgrp, signal, 1); return; @@ -815,6 +1222,7 @@ send_signal: if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) || (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) { eraser(c, tty); + process_echoes(tty); return; } if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) { @@ -822,8 +1230,9 @@ send_signal: if (L_ECHO(tty)) { finish_erasing(tty); if (L_ECHOCTL(tty)) { - tty_put_char(tty, '^'); - tty_put_char(tty, '\b'); + echo_char_raw('^', tty); + echo_char_raw('\b', tty); + process_echoes(tty); } } return; @@ -834,22 +1243,29 @@ send_signal: finish_erasing(tty); echo_char(c, tty); - opost('\n', tty); + echo_char_raw('\n', tty); while (tail != tty->read_head) { echo_char(tty->read_buf[tail], tty); tail = (tail+1) & (N_TTY_BUF_SIZE-1); } + process_echoes(tty); return; } if (c == '\n') { + if (tty->read_cnt >= N_TTY_BUF_SIZE) { + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } if (L_ECHO(tty) || L_ECHONL(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) - tty_put_char(tty, '\a'); - opost('\n', tty); + echo_char_raw('\n', tty); + process_echoes(tty); } goto handle_newline; } if (c == EOF_CHAR(tty)) { + if (tty->read_cnt >= N_TTY_BUF_SIZE) + return; if (tty->canon_head != tty->read_head) set_bit(TTY_PUSH, &tty->flags); c = __DISABLED_CHAR; @@ -857,22 +1273,28 @@ send_signal: } if ((c == EOL_CHAR(tty)) || (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) { + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) + ? 1 : 0; + if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) { + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } /* * XXX are EOL_CHAR and EOL2_CHAR echoed?!? */ if (L_ECHO(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) - tty_put_char(tty, '\a'); /* Record the column of first canon char. */ if (tty->canon_head == tty->read_head) - tty->canon_column = tty->column; + echo_set_canon_col(tty); echo_char(c, tty); + process_echoes(tty); } /* * XXX does PARMRK doubling happen for * EOL_CHAR and EOL2_CHAR? */ - if (I_PARMRK(tty) && c == (unsigned char) '\377') + if (parmrk) put_tty_queue(c, tty); handle_newline: @@ -889,23 +1311,27 @@ handle_newline: } } - finish_erasing(tty); + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; + if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { + /* beep if no space */ + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } if (L_ECHO(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) { - tty_put_char(tty, '\a'); /* beep if no space */ - return; - } + finish_erasing(tty); if (c == '\n') - opost('\n', tty); + echo_char_raw('\n', tty); else { /* Record the column of first canon char. */ if (tty->canon_head == tty->read_head) - tty->canon_column = tty->column; + echo_set_canon_col(tty); echo_char(c, tty); } + process_echoes(tty); } - if (I_PARMRK(tty) && c == (unsigned char) '\377') + if (parmrk) put_tty_queue(c, tty); put_tty_queue(c, tty); @@ -923,10 +1349,11 @@ handle_newline: static void n_tty_write_wakeup(struct tty_struct *tty) { - if (tty->fasync) { - set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + /* Write out any echoed characters that are still pending */ + process_echoes(tty); + + if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) kill_fasync(&tty->fasync, SIGIO, POLL_OUT); - } } /** @@ -1134,6 +1561,10 @@ static void n_tty_close(struct tty_struct *tty) free_buf(tty->read_buf); tty->read_buf = NULL; } + if (tty->echo_buf) { + free_buf(tty->echo_buf); + tty->echo_buf = NULL; + } } /** @@ -1151,13 +1582,19 @@ static int n_tty_open(struct tty_struct *tty) if (!tty) return -EINVAL; - /* This one is ugly. Currently a malloc failure here can panic */ + /* These are ugly. Currently a malloc failure here can panic */ if (!tty->read_buf) { tty->read_buf = alloc_buf(); if (!tty->read_buf) return -ENOMEM; } + if (!tty->echo_buf) { + tty->echo_buf = alloc_buf(); + if (!tty->echo_buf) + return -ENOMEM; + } memset(tty->read_buf, 0, N_TTY_BUF_SIZE); + memset(tty->echo_buf, 0, N_TTY_BUF_SIZE); reset_buffer_flags(tty); tty->column = 0; n_tty_set_termios(tty, NULL); @@ -1487,16 +1924,23 @@ do_it_again: * @buf: userspace buffer pointer * @nr: size of I/O * - * Write function of the terminal device. This is serialized with + * Write function of the terminal device. This is serialized with * respect to other write callers but not to termios changes, reads - * and other such events. We must be careful with N_TTY as the receive - * code will echo characters, thus calling driver write methods. + * and other such events. Since the receive code will echo characters, + * thus calling driver write methods, the output_lock is used in + * the output processing functions called here as well as in the + * echo processing function to protect the column state and space + * left in the buffer. * * This code must be sure never to sleep through a hangup. + * + * Locking: output_lock to protect column state and space left + * (note that the process_output*() functions take this + * lock themselves) */ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, - const unsigned char *buf, size_t nr) + const unsigned char *buf, size_t nr) { const unsigned char *b = buf; DECLARE_WAITQUEUE(wait, current); @@ -1510,6 +1954,9 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, return retval; } + /* Write out any echoed characters that are still pending */ + process_echoes(tty); + add_wait_queue(&tty->write_wait, &wait); while (1) { set_current_state(TASK_INTERRUPTIBLE); @@ -1523,7 +1970,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, } if (O_OPOST(tty) && !(test_bit(TTY_HW_COOK_OUT, &tty->flags))) { while (nr > 0) { - ssize_t num = opost_block(tty, b, nr); + ssize_t num = process_output_block(tty, b, nr); if (num < 0) { if (num == -EAGAIN) break; @@ -1535,7 +1982,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, if (nr == 0) break; c = *b; - if (opost(c, tty) < 0) + if (process_output(c, tty) < 0) break; b++; nr--; } @@ -1565,6 +2012,8 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, break_out: __set_current_state(TASK_RUNNING); remove_wait_queue(&tty->write_wait, &wait); + if (b - buf != nr && tty->fasync) + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); return (b - buf) ? b - buf : retval; } @@ -1663,4 +2112,3 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = { .receive_buf = n_tty_receive_buf, .write_wakeup = n_tty_write_wakeup }; - diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 9a34a1935283..d6102b644b55 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -353,6 +353,7 @@ struct ctrl_ul { /* This holds all information that is needed regarding a port */ struct port { + struct tty_port port; u8 update_flow_control; struct ctrl_ul ctrl_ul; struct ctrl_dl ctrl_dl; @@ -365,8 +366,6 @@ struct port { u8 toggle_ul; u16 token_dl; - struct tty_struct *tty; - int tty_open_count; /* mutex to ensure one access patch to this port */ struct mutex tty_sem; wait_queue_head_t tty_wait; @@ -788,14 +787,14 @@ static void disable_transmit_dl(enum port_type port, struct nozomi *dc) * Return 1 - send buffer to card and ack. * Return 0 - don't ack, don't send buffer to card. */ -static int send_data(enum port_type index, const struct nozomi *dc) +static int send_data(enum port_type index, struct nozomi *dc) { u32 size = 0; - const struct port *port = &dc->port[index]; + struct port *port = &dc->port[index]; const u8 toggle = port->toggle_ul; void __iomem *addr = port->ul_addr[toggle]; const u32 ul_size = port->ul_size[toggle]; - struct tty_struct *tty = port->tty; + struct tty_struct *tty = tty_port_tty_get(&port->port); /* Get data from tty and place in buf for now */ size = __kfifo_get(port->fifo_ul, dc->send_buf, @@ -803,6 +802,7 @@ static int send_data(enum port_type index, const struct nozomi *dc) if (size == 0) { DBG4("No more data to send, disable link:"); + tty_kref_put(tty); return 0; } @@ -815,6 +815,7 @@ static int send_data(enum port_type index, const struct nozomi *dc) if (tty) tty_wakeup(tty); + tty_kref_put(tty); return 1; } @@ -826,7 +827,7 @@ static int receive_data(enum port_type index, struct nozomi *dc) u32 offset = 4; struct port *port = &dc->port[index]; void __iomem *addr = port->dl_addr[port->toggle_dl]; - struct tty_struct *tty = port->tty; + struct tty_struct *tty = tty_port_tty_get(&port->port); int i; if (unlikely(!tty)) { @@ -870,7 +871,7 @@ static int receive_data(enum port_type index, struct nozomi *dc) } set_bit(index, &dc->flip); - + tty_kref_put(tty); return 1; } @@ -1276,9 +1277,15 @@ static irqreturn_t interrupt_handler(int irq, void *dev_id) exit_handler: spin_unlock(&dc->spin_mutex); - for (a = 0; a < NOZOMI_MAX_PORTS; a++) - if (test_and_clear_bit(a, &dc->flip)) - tty_flip_buffer_push(dc->port[a].tty); + for (a = 0; a < NOZOMI_MAX_PORTS; a++) { + struct tty_struct *tty; + if (test_and_clear_bit(a, &dc->flip)) { + tty = tty_port_tty_get(&dc->port[a].port); + if (tty) + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } + } return IRQ_HANDLED; none: spin_unlock(&dc->spin_mutex); @@ -1453,12 +1460,10 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, for (i = 0; i < MAX_PORT; i++) { mutex_init(&dc->port[i].tty_sem); - dc->port[i].tty_open_count = 0; - dc->port[i].tty = NULL; + tty_port_init(&dc->port[i].port); tty_register_device(ntty_driver, dc->index_start + i, &pdev->dev); } - return 0; err_free_sbuf: @@ -1482,14 +1487,16 @@ static void __devexit tty_exit(struct nozomi *dc) flush_scheduled_work(); - for (i = 0; i < MAX_PORT; ++i) - if (dc->port[i].tty && \ - list_empty(&dc->port[i].tty->hangup_work.entry)) - tty_hangup(dc->port[i].tty); - + for (i = 0; i < MAX_PORT; ++i) { + struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port); + if (tty && list_empty(&tty->hangup_work.entry)) + tty_hangup(tty); + tty_kref_put(tty); + } + /* Racy below - surely should wait for scheduled work to be done or + complete off a hangup method ? */ while (dc->open_ttys) msleep(1); - for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) tty_unregister_device(ntty_driver, i); } @@ -1579,23 +1586,22 @@ static int ntty_open(struct tty_struct *tty, struct file *file) if (mutex_lock_interruptible(&port->tty_sem)) return -ERESTARTSYS; - port->tty_open_count++; + port->port.count++; dc->open_ttys++; /* Enable interrupt downlink for channel */ - if (port->tty_open_count == 1) { + if (port->port.count == 1) { + /* FIXME: is this needed now ? */ tty->low_latency = 1; tty->driver_data = port; - port->tty = tty; + tty_port_tty_set(&port->port, tty); DBG1("open: %d", port->token_dl); spin_lock_irqsave(&dc->spin_mutex, flags); dc->last_ier = dc->last_ier | port->token_dl; writew(dc->last_ier, dc->reg_ier); spin_unlock_irqrestore(&dc->spin_mutex, flags); } - mutex_unlock(&port->tty_sem); - return 0; } @@ -1606,31 +1612,30 @@ static int ntty_open(struct tty_struct *tty, struct file *file) static void ntty_close(struct tty_struct *tty, struct file *file) { struct nozomi *dc = get_dc_by_tty(tty); - struct port *port = tty->driver_data; + struct port *nport = tty->driver_data; + struct tty_port *port = &nport->port; unsigned long flags; - if (!dc || !port) + if (!dc || !nport) return; - if (mutex_lock_interruptible(&port->tty_sem)) - return; + /* Users cannot interrupt a close */ + mutex_lock(&nport->tty_sem); - if (!port->tty_open_count) - goto exit; + WARN_ON(!port->count); dc->open_ttys--; - port->tty_open_count--; + port->count--; + tty_port_tty_set(port, NULL); - if (port->tty_open_count == 0) { - DBG1("close: %d", port->token_dl); + if (port->count == 0) { + DBG1("close: %d", nport->token_dl); spin_lock_irqsave(&dc->spin_mutex, flags); - dc->last_ier &= ~(port->token_dl); + dc->last_ier &= ~(nport->token_dl); writew(dc->last_ier, dc->reg_ier); spin_unlock_irqrestore(&dc->spin_mutex, flags); } - -exit: - mutex_unlock(&port->tty_sem); + mutex_unlock(&nport->tty_sem); } /* @@ -1660,7 +1665,7 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, return -EAGAIN; } - if (unlikely(!port->tty_open_count)) { + if (unlikely(!port->port.count)) { DBG1(" "); goto exit; } @@ -1710,7 +1715,7 @@ static int ntty_write_room(struct tty_struct *tty) if (!mutex_trylock(&port->tty_sem)) return 0; - if (!port->tty_open_count) + if (!port->port.count) goto exit; room = port->fifo_ul->size - __kfifo_len(port->fifo_ul); @@ -1866,7 +1871,7 @@ static s32 ntty_chars_in_buffer(struct tty_struct *tty) goto exit_in_buffer; } - if (unlikely(!port->tty_open_count)) { + if (unlikely(!port->port.count)) { dev_err(&dc->pdev->dev, "No tty open?\n"); rval = -ENODEV; goto exit_in_buffer; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 4d64a02612a4..dc073e167abc 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -138,20 +138,15 @@ struct _input_signal_events { */ typedef struct _mgslpc_info { + struct tty_port port; void *if_ptr; /* General purpose pointer (used by SPPP) */ int magic; - int flags; - int count; /* count of opens */ int line; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ struct mgsl_icount icount; - struct tty_struct *tty; int timeout; int x_char; /* xon/xoff character */ - int blocked_open; /* # of blocked opens */ unsigned char read_status_mask; unsigned char ignore_status_mask; @@ -170,9 +165,6 @@ typedef struct _mgslpc_info { int rx_buf_count; /* total number of rx buffers */ int rx_frame_count; /* number of full rx buffers */ - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - wait_queue_head_t status_event_wait_q; wait_queue_head_t event_wait_q; struct timer_list tx_timer; /* HDLC transmit timeout timer */ @@ -375,7 +367,7 @@ static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short static void rx_start(MGSLPC_INFO *info); static void rx_stop(MGSLPC_INFO *info); -static void tx_start(MGSLPC_INFO *info); +static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty); static void tx_stop(MGSLPC_INFO *info); static void tx_set_idle(MGSLPC_INFO *info); @@ -389,7 +381,8 @@ static void async_mode(MGSLPC_INFO *info); static void tx_timeout(unsigned long context); -static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg); +static int carrier_raised(struct tty_port *port); +static void raise_dtr_rts(struct tty_port *port); #if SYNCLINK_GENERIC_HDLC #define dev_to_port(D) (dev_to_hdlc(D)->priv) @@ -410,7 +403,7 @@ static void release_resources(MGSLPC_INFO *info); static void mgslpc_add_device(MGSLPC_INFO *info); static void mgslpc_remove_device(MGSLPC_INFO *info); -static bool rx_get_frame(MGSLPC_INFO *info); +static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty); static void rx_reset_buffers(MGSLPC_INFO *info); static int rx_alloc_buffers(MGSLPC_INFO *info); static void rx_free_buffers(MGSLPC_INFO *info); @@ -421,7 +414,7 @@ static irqreturn_t mgslpc_isr(int irq, void *dev_id); * Bottom half interrupt handlers */ static void bh_handler(struct work_struct *work); -static void bh_transmit(MGSLPC_INFO *info); +static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty); static void bh_status(MGSLPC_INFO *info); /* @@ -432,10 +425,10 @@ static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount); static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params); -static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params); +static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty); static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode); static int set_txidle(MGSLPC_INFO *info, int idle_mode); -static int set_txenable(MGSLPC_INFO *info, int enable); +static int set_txenable(MGSLPC_INFO *info, int enable, struct tty_struct *tty); static int tx_abort(MGSLPC_INFO *info); static int set_rxenable(MGSLPC_INFO *info, int enable); static int wait_events(MGSLPC_INFO *info, int __user *mask); @@ -474,7 +467,7 @@ static struct tty_driver *serial_driver; /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 -static void mgslpc_change_params(MGSLPC_INFO *info); +static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty); static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout); /* PCMCIA prototypes */ @@ -517,6 +510,11 @@ static void ldisc_receive_buf(struct tty_struct *tty, } } +static const struct tty_port_operations mgslpc_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts +}; + static int mgslpc_probe(struct pcmcia_device *link) { MGSLPC_INFO *info; @@ -532,12 +530,12 @@ static int mgslpc_probe(struct pcmcia_device *link) } info->magic = MGSLPC_MAGIC; + tty_port_init(&info->port); + info->port.ops = &mgslpc_port_ops; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; - info->close_delay = 5*HZ/10; - info->closing_wait = 30*HZ; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); + info->port.close_delay = 5*HZ/10; + info->port.closing_wait = 30*HZ; init_waitqueue_head(&info->status_event_wait_q); init_waitqueue_head(&info->event_wait_q); spin_lock_init(&info->lock); @@ -784,7 +782,7 @@ static void tx_release(struct tty_struct *tty) spin_lock_irqsave(&info->lock,flags); if (!info->tx_enabled) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } @@ -823,6 +821,7 @@ static int bh_action(MGSLPC_INFO *info) static void bh_handler(struct work_struct *work) { MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task); + struct tty_struct *tty; int action; if (!info) @@ -833,6 +832,7 @@ static void bh_handler(struct work_struct *work) __FILE__,__LINE__,info->device_name); info->bh_running = true; + tty = tty_port_tty_get(&info->port); while((action = bh_action(info)) != 0) { @@ -844,10 +844,10 @@ static void bh_handler(struct work_struct *work) switch (action) { case BH_RECEIVE: - while(rx_get_frame(info)); + while(rx_get_frame(info, tty)); break; case BH_TRANSMIT: - bh_transmit(info); + bh_transmit(info, tty); break; case BH_STATUS: bh_status(info); @@ -859,14 +859,14 @@ static void bh_handler(struct work_struct *work) } } + tty_kref_put(tty); if (debug_level >= DEBUG_LEVEL_BH) printk( "%s(%d):bh_handler(%s) exit\n", __FILE__,__LINE__,info->device_name); } -static void bh_transmit(MGSLPC_INFO *info) +static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty) { - struct tty_struct *tty = info->tty; if (debug_level >= DEBUG_LEVEL_BH) printk("bh_transmit() entry on %s\n", info->device_name); @@ -945,12 +945,11 @@ static void rx_ready_hdlc(MGSLPC_INFO *info, int eom) issue_command(info, CHA, CMD_RXFIFO); } -static void rx_ready_async(MGSLPC_INFO *info, int tcd) +static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty) { unsigned char data, status, flag; int fifo_count; int work = 0; - struct tty_struct *tty = info->tty; struct mgsl_icount *icount = &info->icount; if (tcd) { @@ -1013,7 +1012,7 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd) } -static void tx_done(MGSLPC_INFO *info) +static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty) { if (!info->tx_active) return; @@ -1042,7 +1041,7 @@ static void tx_done(MGSLPC_INFO *info) else #endif { - if (info->tty->stopped || info->tty->hw_stopped) { + if (tty->stopped || tty->hw_stopped) { tx_stop(info); return; } @@ -1050,7 +1049,7 @@ static void tx_done(MGSLPC_INFO *info) } } -static void tx_ready(MGSLPC_INFO *info) +static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned char fifo_count = 32; int c; @@ -1062,7 +1061,7 @@ static void tx_ready(MGSLPC_INFO *info) if (!info->tx_active) return; } else { - if (info->tty->stopped || info->tty->hw_stopped) { + if (tty->stopped || tty->hw_stopped) { tx_stop(info); return; } @@ -1099,7 +1098,7 @@ static void tx_ready(MGSLPC_INFO *info) } } -static void cts_change(MGSLPC_INFO *info) +static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty) { get_signals(info); if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) @@ -1112,14 +1111,14 @@ static void cts_change(MGSLPC_INFO *info) wake_up_interruptible(&info->status_event_wait_q); wake_up_interruptible(&info->event_wait_q); - if (info->flags & ASYNC_CTS_FLOW) { - if (info->tty->hw_stopped) { + if (info->port.flags & ASYNC_CTS_FLOW) { + if (tty->hw_stopped) { if (info->serial_signals & SerialSignal_CTS) { if (debug_level >= DEBUG_LEVEL_ISR) printk("CTS tx start..."); - if (info->tty) - info->tty->hw_stopped = 0; - tx_start(info); + if (tty) + tty->hw_stopped = 0; + tx_start(info, tty); info->pending_bh |= BH_TRANSMIT; return; } @@ -1127,8 +1126,8 @@ static void cts_change(MGSLPC_INFO *info) if (!(info->serial_signals & SerialSignal_CTS)) { if (debug_level >= DEBUG_LEVEL_ISR) printk("CTS tx stop..."); - if (info->tty) - info->tty->hw_stopped = 1; + if (tty) + tty->hw_stopped = 1; tx_stop(info); } } @@ -1136,7 +1135,7 @@ static void cts_change(MGSLPC_INFO *info) info->pending_bh |= BH_STATUS; } -static void dcd_change(MGSLPC_INFO *info) +static void dcd_change(MGSLPC_INFO *info, struct tty_struct *tty) { get_signals(info); if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) @@ -1158,17 +1157,17 @@ static void dcd_change(MGSLPC_INFO *info) wake_up_interruptible(&info->status_event_wait_q); wake_up_interruptible(&info->event_wait_q); - if (info->flags & ASYNC_CHECK_CD) { + if (info->port.flags & ASYNC_CHECK_CD) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s CD now %s...", info->device_name, (info->serial_signals & SerialSignal_DCD) ? "on" : "off"); if (info->serial_signals & SerialSignal_DCD) - wake_up_interruptible(&info->open_wait); + wake_up_interruptible(&info->port.open_wait); else { if (debug_level >= DEBUG_LEVEL_ISR) printk("doing serial hangup..."); - if (info->tty) - tty_hangup(info->tty); + if (tty) + tty_hangup(tty); } } info->pending_bh |= BH_STATUS; @@ -1214,6 +1213,7 @@ static void ri_change(MGSLPC_INFO *info) static irqreturn_t mgslpc_isr(int dummy, void *dev_id) { MGSLPC_INFO *info = dev_id; + struct tty_struct *tty; unsigned short isr; unsigned char gis, pis; int count=0; @@ -1224,6 +1224,8 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) if (!(info->p_dev->_locked)) return IRQ_HANDLED; + tty = tty_port_tty_get(&info->port); + spin_lock(&info->lock); while ((gis = read_reg(info, CHA + GIS))) { @@ -1239,9 +1241,9 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) if (gis & (BIT1 + BIT0)) { isr = read_reg16(info, CHB + ISR); if (isr & IRQ_DCD) - dcd_change(info); + dcd_change(info, tty); if (isr & IRQ_CTS) - cts_change(info); + cts_change(info, tty); } if (gis & (BIT3 + BIT2)) { @@ -1258,8 +1260,8 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) } if (isr & IRQ_BREAK_ON) { info->icount.brk++; - if (info->flags & ASYNC_SAK) - do_SAK(info->tty); + if (info->port.flags & ASYNC_SAK) + do_SAK(tty); } if (isr & IRQ_RXTIME) { issue_command(info, CHA, CMD_RXFIFO_READ); @@ -1268,7 +1270,7 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) if (info->params.mode == MGSL_MODE_HDLC) rx_ready_hdlc(info, isr & IRQ_RXEOM); else - rx_ready_async(info, isr & IRQ_RXEOM); + rx_ready_async(info, isr & IRQ_RXEOM, tty); } /* transmit IRQs */ @@ -1277,14 +1279,14 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) info->icount.txabort++; else info->icount.txunder++; - tx_done(info); + tx_done(info, tty); } else if (isr & IRQ_ALLSENT) { info->icount.txok++; - tx_done(info); + tx_done(info, tty); } else if (isr & IRQ_TXFIFO) - tx_ready(info); + tx_ready(info, tty); } if (gis & BIT7) { pis = read_reg(info, CHA + PIS); @@ -1308,6 +1310,7 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) } spin_unlock(&info->lock); + tty_kref_put(tty); if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):mgslpc_isr(%d)exit.\n", @@ -1318,14 +1321,14 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) /* Initialize and start device. */ -static int startup(MGSLPC_INFO * info) +static int startup(MGSLPC_INFO * info, struct tty_struct *tty) { int retval = 0; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):startup(%s)\n",__FILE__,__LINE__,info->device_name); - if (info->flags & ASYNC_INITIALIZED) + if (info->port.flags & ASYNC_INITIALIZED) return 0; if (!info->tx_buf) { @@ -1352,30 +1355,30 @@ static int startup(MGSLPC_INFO * info) retval = adapter_test(info); if ( retval ) { - if (capable(CAP_SYS_ADMIN) && info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (capable(CAP_SYS_ADMIN) && tty) + set_bit(TTY_IO_ERROR, &tty->flags); release_resources(info); return retval; } /* program hardware for current parameters */ - mgslpc_change_params(info); + mgslpc_change_params(info, tty); - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); + if (tty) + clear_bit(TTY_IO_ERROR, &tty->flags); - info->flags |= ASYNC_INITIALIZED; + info->port.flags |= ASYNC_INITIALIZED; return 0; } /* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware */ -static void shutdown(MGSLPC_INFO * info) +static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty) { unsigned long flags; - if (!(info->flags & ASYNC_INITIALIZED)) + if (!(info->port.flags & ASYNC_INITIALIZED)) return; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1402,7 +1405,7 @@ static void shutdown(MGSLPC_INFO * info) /* TODO:disable interrupts instead of reset to preserve signal states */ reset_device(info); - if (!info->tty || info->tty->termios->c_cflag & HUPCL) { + if (!tty || tty->termios->c_cflag & HUPCL) { info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); set_signals(info); } @@ -1411,13 +1414,13 @@ static void shutdown(MGSLPC_INFO * info) release_resources(info); - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); - info->flags &= ~ASYNC_INITIALIZED; + info->port.flags &= ~ASYNC_INITIALIZED; } -static void mgslpc_program_hw(MGSLPC_INFO *info) +static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned long flags; @@ -1443,7 +1446,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info) port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI); get_signals(info); - if (info->netcount || info->tty->termios->c_cflag & CREAD) + if (info->netcount || (tty && (tty->termios->c_cflag & CREAD))) rx_start(info); spin_unlock_irqrestore(&info->lock,flags); @@ -1451,19 +1454,19 @@ static void mgslpc_program_hw(MGSLPC_INFO *info) /* Reconfigure adapter based on new parameters */ -static void mgslpc_change_params(MGSLPC_INFO *info) +static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned cflag; int bits_per_char; - if (!info->tty || !info->tty->termios) + if (!tty || !tty->termios) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_change_params(%s)\n", __FILE__,__LINE__, info->device_name ); - cflag = info->tty->termios->c_cflag; + cflag = tty->termios->c_cflag; /* if B0 rate (hangup) specified then negate DTR and RTS */ /* otherwise assert DTR and RTS */ @@ -1510,7 +1513,7 @@ static void mgslpc_change_params(MGSLPC_INFO *info) * current data rate. */ if (info->params.data_rate <= 460800) { - info->params.data_rate = tty_get_baud_rate(info->tty); + info->params.data_rate = tty_get_baud_rate(tty); } if ( info->params.data_rate ) { @@ -1520,24 +1523,24 @@ static void mgslpc_change_params(MGSLPC_INFO *info) info->timeout += HZ/50; /* Add .02 seconds of slop */ if (cflag & CRTSCTS) - info->flags |= ASYNC_CTS_FLOW; + info->port.flags |= ASYNC_CTS_FLOW; else - info->flags &= ~ASYNC_CTS_FLOW; + info->port.flags &= ~ASYNC_CTS_FLOW; if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; + info->port.flags &= ~ASYNC_CHECK_CD; else - info->flags |= ASYNC_CHECK_CD; + info->port.flags |= ASYNC_CHECK_CD; /* process tty input control flags */ info->read_status_mask = 0; - if (I_INPCK(info->tty)) + if (I_INPCK(tty)) info->read_status_mask |= BIT7 | BIT6; - if (I_IGNPAR(info->tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= BIT7 | BIT6; - mgslpc_program_hw(info); + mgslpc_program_hw(info, tty); } /* Add a character to the transmit buffer @@ -1597,7 +1600,7 @@ static void mgslpc_flush_chars(struct tty_struct *tty) spin_lock_irqsave(&info->lock,flags); if (!info->tx_active) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } @@ -1659,7 +1662,7 @@ start: if (info->tx_count && !tty->stopped && !tty->hw_stopped) { spin_lock_irqsave(&info->lock,flags); if (!info->tx_active) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } cleanup: @@ -1764,7 +1767,7 @@ static void mgslpc_send_xchar(struct tty_struct *tty, char ch) if (ch) { spin_lock_irqsave(&info->lock,flags); if (!info->tx_enabled) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1862,7 +1865,7 @@ static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params) * * Returns: 0 if success, otherwise error code */ -static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params) +static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params, struct tty_struct *tty) { unsigned long flags; MGSL_PARAMS tmp_params; @@ -1883,7 +1886,7 @@ static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params) memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); spin_unlock_irqrestore(&info->lock,flags); - mgslpc_change_params(info); + mgslpc_change_params(info, tty); return 0; } @@ -1944,7 +1947,7 @@ static int set_interface(MGSLPC_INFO * info, int if_mode) return 0; } -static int set_txenable(MGSLPC_INFO * info, int enable) +static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty) { unsigned long flags; @@ -1954,7 +1957,7 @@ static int set_txenable(MGSLPC_INFO * info, int enable) spin_lock_irqsave(&info->lock,flags); if (enable) { if (!info->tx_enabled) - tx_start(info); + tx_start(info, tty); } else { if (info->tx_enabled) tx_stop(info); @@ -2263,6 +2266,11 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; + int error; + struct mgsl_icount cnow; /* kernel counter temps */ + struct serial_icounter_struct __user *p_cuser; /* user space */ + void __user *argp = (void __user *)arg; + unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__, @@ -2277,22 +2285,11 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, return -EIO; } - return ioctl_common(info, cmd, arg); -} - -static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg) -{ - int error; - struct mgsl_icount cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; /* user space */ - void __user *argp = (void __user *)arg; - unsigned long flags; - switch (cmd) { case MGSL_IOCGPARAMS: return get_params(info, argp); case MGSL_IOCSPARAMS: - return set_params(info, argp); + return set_params(info, argp, tty); case MGSL_IOCGTXIDLE: return get_txidle(info, argp); case MGSL_IOCSTXIDLE: @@ -2302,7 +2299,7 @@ static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg) case MGSL_IOCSIF: return set_interface(info,(int)arg); case MGSL_IOCTXENABLE: - return set_txenable(info,(int)arg); + return set_txenable(info,(int)arg, tty); case MGSL_IOCRXENABLE: return set_rxenable(info,(int)arg); case MGSL_IOCTXABORT: @@ -2369,7 +2366,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term == RELEVANT_IFLAG(old_termios->c_iflag))) return; - mgslpc_change_params(info); + mgslpc_change_params(info, tty); /* Handle transition to B0 status */ if (old_termios->c_cflag & CBAUD && @@ -2404,81 +2401,34 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term static void mgslpc_close(struct tty_struct *tty, struct file * filp) { MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; + struct tty_port *port = &info->port; if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close")) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_close(%s) entry, count=%d\n", - __FILE__,__LINE__, info->device_name, info->count); - - if (!info->count) - return; + __FILE__,__LINE__, info->device_name, port->count); - if (tty_hung_up_p(filp)) - goto cleanup; - - if ((tty->count == 1) && (info->count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - printk("mgslpc_close: bad refcount; tty->count is 1, " - "info->count is %d\n", info->count); - info->count = 1; - } + WARN_ON(!port->count); - info->count--; - - /* if at least one open remaining, leave hardware active */ - if (info->count) + if (tty_port_close_start(port, tty, filp) == 0) goto cleanup; - info->flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_close(%s) calling tty_wait_until_sent\n", - __FILE__,__LINE__, info->device_name ); - tty_wait_until_sent(tty, info->closing_wait); - } - - if (info->flags & ASYNC_INITIALIZED) + if (port->flags & ASYNC_INITIALIZED) mgslpc_wait_until_sent(tty, info->timeout); mgslpc_flush_buffer(tty); tty_ldisc_flush(tty); - - shutdown(info); - - tty->closing = 0; - info->tty = NULL; - - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->close_wait); - + shutdown(info, tty); + + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); cleanup: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__,__LINE__, - tty->driver->name, info->count); + tty->driver->name, port->count); } /* Wait until the transmitter is empty. @@ -2498,7 +2448,7 @@ static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout) if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent")) return; - if (!(info->flags & ASYNC_INITIALIZED)) + if (!(info->port.flags & ASYNC_INITIALIZED)) goto exit; orig_jiffies = jiffies; @@ -2559,120 +2509,40 @@ static void mgslpc_hangup(struct tty_struct *tty) return; mgslpc_flush_buffer(tty); - shutdown(info); - - info->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = NULL; - - wake_up_interruptible(&info->open_wait); + shutdown(info, tty); + tty_port_hangup(&info->port); } -/* Block the current process until the specified port - * is ready to be opened. - */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - MGSLPC_INFO *info) +static int carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval; - bool do_clocal = false; - bool extra_count = false; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready on %s\n", - __FILE__,__LINE__, tty->driver->name ); - - if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ - /* nonblock mode is set or port is not enabled */ - /* just verify that callout device is not active */ - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = true; - - /* Wait for carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * mgslpc_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - - retval = 0; - add_wait_queue(&info->open_wait, &wait); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready before block on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->count ); - - spin_lock_irqsave(&info->lock, flags); - if (!tty_hung_up_p(filp)) { - extra_count = true; - info->count--; - } - spin_unlock_irqrestore(&info->lock, flags); - info->blocked_open++; - - while (1) { - if ((tty->termios->c_cflag & CBAUD)) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - set_current_state(TASK_INTERRUPTIBLE); - - if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){ - retval = (info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - break; - } - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - if (!(info->flags & ASYNC_CLOSING) && - (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { - break; - } - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->count ); - - schedule(); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); + MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); + unsigned long flags; - if (extra_count) - info->count++; - info->blocked_open--; + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready after blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->count ); + if (info->serial_signals & SerialSignal_DCD) + return 1; + return 0; +} - if (!retval) - info->flags |= ASYNC_NORMAL_ACTIVE; +static void raise_dtr_rts(struct tty_port *port) +{ + MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); + unsigned long flags; - return retval; + spin_lock_irqsave(&info->lock,flags); + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); } + static int mgslpc_open(struct tty_struct *tty, struct file * filp) { MGSLPC_INFO *info; + struct tty_port *port; int retval, line; unsigned long flags; @@ -2691,23 +2561,24 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open")) return -ENODEV; + port = &info->port; tty->driver_data = info; - info->tty = tty; + tty_port_tty_set(port, tty); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_open(%s), old ref count = %d\n", - __FILE__,__LINE__,tty->driver->name, info->count); + __FILE__,__LINE__,tty->driver->name, port->count); /* If port is closing, signal caller to try again */ - if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){ - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); - retval = ((info->flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING){ + if (port->flags & ASYNC_CLOSING) + interruptible_sleep_on(&port->close_wait); + retval = ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); goto cleanup; } - info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); if (info->netcount) { @@ -2715,17 +2586,19 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) spin_unlock_irqrestore(&info->netlock, flags); goto cleanup; } - info->count++; + spin_lock(&port->lock); + port->count++; + spin_unlock(&port->lock); spin_unlock_irqrestore(&info->netlock, flags); - if (info->count == 1) { + if (port->count == 1) { /* 1st open on this device, init hardware */ - retval = startup(info); + retval = startup(info, tty); if (retval < 0) goto cleanup; } - retval = block_til_ready(tty, filp, info); + retval = tty_port_block_til_ready(&info->port, tty, filp); if (retval) { if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready(%s) returned %d\n", @@ -2739,13 +2612,6 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) retval = 0; cleanup: - if (retval) { - if (tty->count == 1) - info->tty = NULL; /* tty layer will release tty struct */ - if(info->count) - info->count--; - } - return retval; } @@ -3500,7 +3366,7 @@ static void rx_start(MGSLPC_INFO *info) info->rx_enabled = true; } -static void tx_start(MGSLPC_INFO *info) +static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):tx_start(%s)\n", @@ -3524,11 +3390,11 @@ static void tx_start(MGSLPC_INFO *info) if (info->params.mode == MGSL_MODE_ASYNC) { if (!info->tx_active) { info->tx_active = true; - tx_ready(info); + tx_ready(info, tty); } } else { info->tx_active = true; - tx_ready(info); + tx_ready(info, tty); mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000)); } @@ -3849,13 +3715,12 @@ static void rx_reset_buffers(MGSLPC_INFO *info) * * Returns true if frame returned, otherwise false */ -static bool rx_get_frame(MGSLPC_INFO *info) +static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned short status; RXBUF *buf; unsigned int framesize = 0; unsigned long flags; - struct tty_struct *tty = info->tty; bool return_frame = false; if (info->rx_frame_count == 0) @@ -4075,7 +3940,11 @@ static void tx_timeout(unsigned long context) hdlcdev_tx_done(info); else #endif - bh_transmit(info); + { + struct tty_struct *tty = tty_port_tty_get(&info->port); + bh_transmit(info, tty); + tty_kref_put(tty); + } } #if SYNCLINK_GENERIC_HDLC @@ -4094,11 +3963,12 @@ static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, unsigned short parity) { MGSLPC_INFO *info = dev_to_port(dev); + struct tty_struct *tty; unsigned char new_encoding; unsigned short new_crctype; /* return error if TTY interface open */ - if (info->count) + if (info->port.count) return -EBUSY; switch (encoding) @@ -4123,8 +3993,11 @@ static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, info->params.crc_type = new_crctype; /* if network interface up, reprogram hardware */ - if (info->netcount) - mgslpc_program_hw(info); + if (info->netcount) { + tty = tty_port_tty_get(&info->port); + mgslpc_program_hw(info, tty); + tty_kref_put(tty); + } return 0; } @@ -4165,8 +4038,11 @@ static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev) /* start hardware transmitter if necessary */ spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active) - tx_start(info); + if (!info->tx_active) { + struct tty_struct *tty = tty_port_tty_get(&info->port); + tx_start(info, tty); + tty_kref_put(tty); + } spin_unlock_irqrestore(&info->lock,flags); return 0; @@ -4183,6 +4059,7 @@ static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev) static int hdlcdev_open(struct net_device *dev) { MGSLPC_INFO *info = dev_to_port(dev); + struct tty_struct *tty; int rc; unsigned long flags; @@ -4195,7 +4072,7 @@ static int hdlcdev_open(struct net_device *dev) /* arbitrate between network and tty opens */ spin_lock_irqsave(&info->netlock, flags); - if (info->count != 0 || info->netcount != 0) { + if (info->port.count != 0 || info->netcount != 0) { printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); spin_unlock_irqrestore(&info->netlock, flags); return -EBUSY; @@ -4203,17 +4080,19 @@ static int hdlcdev_open(struct net_device *dev) info->netcount=1; spin_unlock_irqrestore(&info->netlock, flags); + tty = tty_port_tty_get(&info->port); /* claim resources and init adapter */ - if ((rc = startup(info)) != 0) { + if ((rc = startup(info, tty)) != 0) { + tty_kref_put(tty); spin_lock_irqsave(&info->netlock, flags); info->netcount=0; spin_unlock_irqrestore(&info->netlock, flags); return rc; } - /* assert DTR and RTS, apply hardware settings */ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - mgslpc_program_hw(info); + mgslpc_program_hw(info, tty); + tty_kref_put(tty); /* enable network layer transmit */ dev->trans_start = jiffies; @@ -4241,6 +4120,7 @@ static int hdlcdev_open(struct net_device *dev) static int hdlcdev_close(struct net_device *dev) { MGSLPC_INFO *info = dev_to_port(dev); + struct tty_struct *tty = tty_port_tty_get(&info->port); unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -4249,8 +4129,8 @@ static int hdlcdev_close(struct net_device *dev) netif_stop_queue(dev); /* shutdown adapter and release resources */ - shutdown(info); - + shutdown(info, tty); + tty_kref_put(tty); hdlc_close(dev); spin_lock_irqsave(&info->netlock, flags); @@ -4281,7 +4161,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); /* return error if TTY interface open */ - if (info->count) + if (info->port.count) return -EBUSY; if (cmd != SIOCWANDEV) @@ -4354,8 +4234,11 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) info->params.clock_speed = 0; /* if network interface up, reprogram hardware */ - if (info->netcount) - mgslpc_program_hw(info); + if (info->netcount) { + struct tty_struct *tty = tty_port_tty_get(&info->port); + mgslpc_program_hw(info, tty); + tty_kref_put(tty); + } return 0; default: diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 6d4582712b1f..112a6ba9a96f 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -5,8 +5,6 @@ * * Added support for a Unix98-style ptmx device. * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998 - * Added TTY_DO_WRITE_WAKEUP to enable n_tty to send POLL_OUT to - * waiting writers -- Sapan Bhatia <sapan@corewars.org> * * When reading this code see also fs/devpts. In particular note that the * driver_data field is used by the devpts side as a binding to the devpts @@ -217,7 +215,6 @@ static int pty_open(struct tty_struct *tty, struct file *filp) clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); set_bit(TTY_THROTTLED, &tty->flags); - set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); retval = 0; out: return retval; @@ -230,6 +227,55 @@ static void pty_set_termios(struct tty_struct *tty, tty->termios->c_cflag |= (CS8 | CREAD); } +/** + * pty_do_resize - resize event + * @tty: tty being resized + * @real_tty: real tty (not the same as tty if using a pty/tty pair) + * @rows: rows (character) + * @cols: cols (character) + * + * Update the termios variables and send the neccessary signals to + * peform a terminal resize correctly + */ + +int pty_resize(struct tty_struct *tty, struct winsize *ws) +{ + struct pid *pgrp, *rpgrp; + unsigned long flags; + struct tty_struct *pty = tty->link; + + /* For a PTY we need to lock the tty side */ + mutex_lock(&tty->termios_mutex); + if (!memcmp(ws, &tty->winsize, sizeof(*ws))) + goto done; + + /* Get the PID values and reference them so we can + avoid holding the tty ctrl lock while sending signals. + We need to lock these individually however. */ + + spin_lock_irqsave(&tty->ctrl_lock, flags); + pgrp = get_pid(tty->pgrp); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + + spin_lock_irqsave(&pty->ctrl_lock, flags); + rpgrp = get_pid(pty->pgrp); + spin_unlock_irqrestore(&pty->ctrl_lock, flags); + + if (pgrp) + kill_pgrp(pgrp, SIGWINCH, 1); + if (rpgrp != pgrp && rpgrp) + kill_pgrp(rpgrp, SIGWINCH, 1); + + put_pid(pgrp); + put_pid(rpgrp); + + tty->winsize = *ws; + pty->winsize = *ws; /* Never used so will go away soon */ +done: + mutex_unlock(&tty->termios_mutex); + return 0; +} + static int pty_install(struct tty_driver *driver, struct tty_struct *tty) { struct tty_struct *o_tty; @@ -290,6 +336,7 @@ static const struct tty_operations pty_ops = { .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, + .resize = pty_resize }; /* Traditional BSD devices */ @@ -319,6 +366,7 @@ static const struct tty_operations pty_ops_bsd = { .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .ioctl = pty_bsd_ioctl, + .resize = pty_resize }; static void __init legacy_pty_init(void) @@ -561,7 +609,8 @@ static const struct tty_operations ptm_unix98_ops = { .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .ioctl = pty_unix98_ioctl, - .shutdown = pty_unix98_shutdown + .shutdown = pty_unix98_shutdown, + .resize = pty_resize }; static const struct tty_operations pty_unix98_ops = { diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c index a8f68a3f14dd..2e8a6eed34be 100644 --- a/drivers/char/rio/rio_linux.c +++ b/drivers/char/rio/rio_linux.c @@ -173,7 +173,7 @@ static void rio_disable_tx_interrupts(void *ptr); static void rio_enable_tx_interrupts(void *ptr); static void rio_disable_rx_interrupts(void *ptr); static void rio_enable_rx_interrupts(void *ptr); -static int rio_get_CD(void *ptr); +static int rio_carrier_raised(struct tty_port *port); static void rio_shutdown_port(void *ptr); static int rio_set_real_termios(void *ptr); static void rio_hungup(void *ptr); @@ -224,7 +224,6 @@ static struct real_driver rio_real_driver = { rio_enable_tx_interrupts, rio_disable_rx_interrupts, rio_enable_rx_interrupts, - rio_get_CD, rio_shutdown_port, rio_set_real_termios, rio_chars_in_buffer, @@ -476,9 +475,9 @@ static void rio_enable_rx_interrupts(void *ptr) /* Jeez. Isn't this simple? */ -static int rio_get_CD(void *ptr) +static int rio_carrier_raised(struct tty_port *port) { - struct Port *PortP = ptr; + struct Port *PortP = container_of(port, struct Port, gs.port); int rv; func_enter(); @@ -797,16 +796,9 @@ static int rio_init_drivers(void) return 1; } - -static void *ckmalloc(int size) -{ - void *p; - - p = kzalloc(size, GFP_KERNEL); - return p; -} - - +static const struct tty_port_operations rio_port_ops = { + .carrier_raised = rio_carrier_raised, +}; static int rio_init_datastructures(void) { @@ -826,33 +818,30 @@ static int rio_init_datastructures(void) #define TMIO_SZ sizeof(struct termios *) rio_dprintk(RIO_DEBUG_INIT, "getting : %Zd %Zd %Zd %Zd %Zd bytes\n", RI_SZ, RIO_HOSTS * HOST_SZ, RIO_PORTS * PORT_SZ, RIO_PORTS * TMIO_SZ, RIO_PORTS * TMIO_SZ); - if (!(p = ckmalloc(RI_SZ))) + if (!(p = kzalloc(RI_SZ, GFP_KERNEL))) goto free0; - if (!(p->RIOHosts = ckmalloc(RIO_HOSTS * HOST_SZ))) + if (!(p->RIOHosts = kzalloc(RIO_HOSTS * HOST_SZ, GFP_KERNEL))) goto free1; - if (!(p->RIOPortp = ckmalloc(RIO_PORTS * PORT_SZ))) + if (!(p->RIOPortp = kzalloc(RIO_PORTS * PORT_SZ, GFP_KERNEL))) goto free2; p->RIOConf = RIOConf; rio_dprintk(RIO_DEBUG_INIT, "Got : %p %p %p\n", p, p->RIOHosts, p->RIOPortp); #if 1 for (i = 0; i < RIO_PORTS; i++) { - port = p->RIOPortp[i] = ckmalloc(sizeof(struct Port)); + port = p->RIOPortp[i] = kzalloc(sizeof(struct Port), GFP_KERNEL); if (!port) { goto free6; } rio_dprintk(RIO_DEBUG_INIT, "initing port %d (%d)\n", i, port->Mapped); + tty_port_init(&port->gs.port); + port->gs.port.ops = &rio_port_ops; port->PortNum = i; port->gs.magic = RIO_MAGIC; port->gs.close_delay = HZ / 2; port->gs.closing_wait = 30 * HZ; port->gs.rd = &rio_real_driver; spin_lock_init(&port->portSem); - /* - * Initializing wait queue - */ - init_waitqueue_head(&port->gs.port.open_wait); - init_waitqueue_head(&port->gs.port.close_wait); } #else /* We could postpone initializing them to when they are configured. */ diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 2c6c8f33d6b4..9af8d74875bc 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -857,98 +857,21 @@ static void rc_shutdown_port(struct tty_struct *tty, rc_shutdown_board(bp); } -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct riscom_port *port) +static int carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - struct riscom_board *bp = port_Board(port); - int retval; - int do_clocal = 0; - int CD; + struct riscom_port *p = container_of(port, struct riscom_port, port); + struct riscom_board *bp = port_Board(p); unsigned long flags; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->port.close_wait); - if (port->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->port.open_wait, &wait); - + int CD; + spin_lock_irqsave(&riscom_lock, flags); - - if (!tty_hung_up_p(filp)) - port->port.count--; - + rc_out(bp, CD180_CAR, port_No(p)); + CD = rc_in(bp, CD180_MSVR) & MSVR_CD; + rc_out(bp, CD180_MSVR, MSVR_RTS); + bp->DTR &= ~(1u << port_No(p)); + rc_out(bp, RC_DTR, bp->DTR); spin_unlock_irqrestore(&riscom_lock, flags); - - port->port.blocked_open++; - while (1) { - spin_lock_irqsave(&riscom_lock, flags); - - rc_out(bp, CD180_CAR, port_No(port)); - CD = rc_in(bp, CD180_MSVR) & MSVR_CD; - rc_out(bp, CD180_MSVR, MSVR_RTS); - bp->DTR &= ~(1u << port_No(port)); - rc_out(bp, RC_DTR, bp->DTR); - - spin_unlock_irqrestore(&riscom_lock, flags); - - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->port.flags & ASYNC_CLOSING) && - (do_clocal || CD)) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - __set_current_state(TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->port.count++; - port->port.blocked_open--; - if (retval) - return retval; - - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + return CD; } static int rc_open(struct tty_struct *tty, struct file *filp) @@ -977,13 +900,13 @@ static int rc_open(struct tty_struct *tty, struct file *filp) error = rc_setup_port(bp, port); if (error == 0) - error = block_til_ready(tty, filp, port); + error = tty_port_block_til_ready(&port->port, tty, filp); return error; } static void rc_flush_buffer(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_flush_buffer")) @@ -998,7 +921,7 @@ static void rc_flush_buffer(struct tty_struct *tty) static void rc_close(struct tty_struct *tty, struct file *filp) { - struct riscom_port *port = (struct riscom_port *) tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; unsigned long timeout; @@ -1006,40 +929,19 @@ static void rc_close(struct tty_struct *tty, struct file *filp) if (!port || rc_paranoia_check(port, tty->name, "close")) return; - spin_lock_irqsave(&riscom_lock, flags); - - if (tty_hung_up_p(filp)) - goto out; - bp = port_Board(port); - if ((tty->count == 1) && (port->port.count != 1)) { - printk(KERN_INFO "rc%d: rc_close: bad port count;" - " tty->count is 1, port count is %d\n", - board_No(bp), port->port.count); - port->port.count = 1; - } - if (--port->port.count < 0) { - printk(KERN_INFO "rc%d: rc_close: bad port count " - "for tty%d: %d\n", - board_No(bp), port_No(port), port->port.count); - port->port.count = 0; - } - if (port->port.count) - goto out; - port->port.flags |= ASYNC_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->port.closing_wait); + + if (tty_port_close_start(&port->port, tty, filp) == 0) + return; + /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the * line status register. */ + + spin_lock_irqsave(&riscom_lock, flags); port->IER &= ~IER_RXD; if (port->port.flags & ASYNC_INITIALIZED) { port->IER &= ~IER_TXRDY; @@ -1053,33 +955,24 @@ static void rc_close(struct tty_struct *tty, struct file *filp) */ timeout = jiffies + HZ; while (port->IER & IER_TXEMPTY) { + spin_unlock_irqrestore(&riscom_lock, flags); msleep_interruptible(jiffies_to_msecs(port->timeout)); + spin_lock_irqsave(&riscom_lock, flags); if (time_after(jiffies, timeout)) break; } } rc_shutdown_port(tty, bp, port); rc_flush_buffer(tty); - tty_ldisc_flush(tty); - - tty->closing = 0; - port->port.tty = NULL; - if (port->port.blocked_open) { - if (port->port.close_delay) - msleep_interruptible(jiffies_to_msecs(port->port.close_delay)); - wake_up_interruptible(&port->port.open_wait); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&port->port.close_wait); - -out: spin_unlock_irqrestore(&riscom_lock, flags); + + tty_port_close_end(&port->port, tty); } static int rc_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; int c, total = 0; unsigned long flags; @@ -1122,7 +1015,7 @@ static int rc_write(struct tty_struct *tty, static int rc_put_char(struct tty_struct *tty, unsigned char ch) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; int ret = 0; @@ -1146,7 +1039,7 @@ out: static void rc_flush_chars(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_flush_chars")) @@ -1166,7 +1059,7 @@ static void rc_flush_chars(struct tty_struct *tty) static int rc_write_room(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; int ret; if (rc_paranoia_check(port, tty->name, "rc_write_room")) @@ -1180,7 +1073,7 @@ static int rc_write_room(struct tty_struct *tty) static int rc_chars_in_buffer(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer")) return 0; @@ -1190,7 +1083,7 @@ static int rc_chars_in_buffer(struct tty_struct *tty) static int rc_tiocmget(struct tty_struct *tty, struct file *file) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned char status; unsigned int result; @@ -1220,7 +1113,7 @@ static int rc_tiocmget(struct tty_struct *tty, struct file *file) static int rc_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; struct riscom_board *bp; @@ -1252,7 +1145,7 @@ static int rc_tiocmset(struct tty_struct *tty, struct file *file, static int rc_send_break(struct tty_struct *tty, int length) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp = port_Board(port); unsigned long flags; @@ -1345,7 +1238,7 @@ static int rc_get_serial_info(struct riscom_port *port, static int rc_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; void __user *argp = (void __user *)arg; int retval; @@ -1371,7 +1264,7 @@ static int rc_ioctl(struct tty_struct *tty, struct file *filp, static void rc_throttle(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1393,7 +1286,7 @@ static void rc_throttle(struct tty_struct *tty) static void rc_unthrottle(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1415,7 +1308,7 @@ static void rc_unthrottle(struct tty_struct *tty) static void rc_stop(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1433,7 +1326,7 @@ static void rc_stop(struct tty_struct *tty) static void rc_start(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1454,8 +1347,9 @@ static void rc_start(struct tty_struct *tty) static void rc_hangup(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; + unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_hangup")) return; @@ -1463,16 +1357,18 @@ static void rc_hangup(struct tty_struct *tty) bp = port_Board(port); rc_shutdown_port(tty, bp, port); + spin_lock_irqsave(&port->port.lock, flags); port->port.count = 0; port->port.flags &= ~ASYNC_NORMAL_ACTIVE; port->port.tty = NULL; wake_up_interruptible(&port->port.open_wait); + spin_unlock_irqrestore(&port->port.lock, flags); } static void rc_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_set_termios")) @@ -1510,6 +1406,11 @@ static const struct tty_operations riscom_ops = { .break_ctl = rc_send_break, }; +static const struct tty_port_operations riscom_port_ops = { + .carrier_raised = carrier_raised, +}; + + static int __init rc_init_drivers(void) { int error; @@ -1541,6 +1442,7 @@ static int __init rc_init_drivers(void) memset(rc_port, 0, sizeof(rc_port)); for (i = 0; i < RC_NPORT * RC_NBOARD; i++) { tty_port_init(&rc_port[i].port); + rc_port[i].port.ops = &riscom_port_ops; rc_port[i].magic = RISCOM8_MAGIC; } return 0; diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 584d791e84a6..f59fc5cea067 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -135,6 +135,7 @@ static int rcktpt_type[NUM_BOARDS]; static int is_PCI[NUM_BOARDS]; static rocketModel_t rocketModel[NUM_BOARDS]; static int max_board; +static const struct tty_port_operations rocket_port_ops; /* * The following arrays define the interrupt bits corresponding to each AIOP. @@ -435,15 +436,15 @@ static void rp_do_transmit(struct r_port *info) #endif if (!info) return; - if (!info->port.tty) { - printk(KERN_WARNING "rp: WARNING %s called with " - "info->port.tty==NULL\n", __func__); + tty = tty_port_tty_get(&info->port); + + if (tty == NULL) { + printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__); clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); return; } spin_lock_irqsave(&info->slock, flags); - tty = info->port.tty; info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); /* Loop sending data to FIFO until done or FIFO full */ @@ -477,6 +478,7 @@ static void rp_do_transmit(struct r_port *info) } spin_unlock_irqrestore(&info->slock, flags); + tty_kref_put(tty); #ifdef ROCKET_DEBUG_INTR printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head, @@ -498,18 +500,18 @@ static void rp_handle_port(struct r_port *info) if (!info) return; - if ((info->flags & ROCKET_INITIALIZED) == 0) { + if ((info->port.flags & ASYNC_INITIALIZED) == 0) { printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " "info->flags & NOT_INIT\n"); return; } - if (!info->port.tty) { + tty = tty_port_tty_get(&info->port); + if (!tty) { printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " - "info->port.tty==NULL\n"); + "tty==NULL\n"); return; } cp = &info->channel; - tty = info->port.tty; IntMask = sGetChanIntID(cp) & info->intmask; #ifdef ROCKET_DEBUG_INTR @@ -541,6 +543,7 @@ static void rp_handle_port(struct r_port *info) printk(KERN_INFO "DSR change...\n"); } #endif + tty_kref_put(tty); } /* @@ -649,9 +652,8 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) info->board = board; info->aiop = aiop; info->chan = chan; - info->port.closing_wait = 3000; - info->port.close_delay = 50; - init_waitqueue_head(&info->port.open_wait); + tty_port_init(&info->port); + info->port.ops = &rocket_port_ops; init_completion(&info->close_wait); info->flags &= ~ROCKET_MODE_MASK; switch (pc104[board][line]) { @@ -710,7 +712,7 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) * Configures a rocketport port according to its termio settings. Called from * user mode into the driver (exception handler). *info CD manipulation is spinlock protected. */ -static void configure_r_port(struct r_port *info, +static void configure_r_port(struct tty_struct *tty, struct r_port *info, struct ktermios *old_termios) { unsigned cflag; @@ -718,7 +720,7 @@ static void configure_r_port(struct r_port *info, unsigned rocketMode; int bits, baud, divisor; CHANNEL_t *cp; - struct ktermios *t = info->port.tty->termios; + struct ktermios *t = tty->termios; cp = &info->channel; cflag = t->c_cflag; @@ -751,7 +753,7 @@ static void configure_r_port(struct r_port *info, } /* baud rate */ - baud = tty_get_baud_rate(info->port.tty); + baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1; @@ -769,7 +771,7 @@ static void configure_r_port(struct r_port *info, sSetBaud(cp, divisor); /* FIXME: Should really back compute a baud rate from the divisor */ - tty_encode_baud_rate(info->port.tty, baud, baud); + tty_encode_baud_rate(tty, baud, baud); if (cflag & CRTSCTS) { info->intmask |= DELTA_CTS; @@ -794,15 +796,15 @@ static void configure_r_port(struct r_port *info, * Handle software flow control in the board */ #ifdef ROCKET_SOFT_FLOW - if (I_IXON(info->port.tty)) { + if (I_IXON(tty)) { sEnTxSoftFlowCtl(cp); - if (I_IXANY(info->port.tty)) { + if (I_IXANY(tty)) { sEnIXANY(cp); } else { sDisIXANY(cp); } - sSetTxXONChar(cp, START_CHAR(info->port.tty)); - sSetTxXOFFChar(cp, STOP_CHAR(info->port.tty)); + sSetTxXONChar(cp, START_CHAR(tty)); + sSetTxXOFFChar(cp, STOP_CHAR(tty)); } else { sDisTxSoftFlowCtl(cp); sDisIXANY(cp); @@ -814,24 +816,24 @@ static void configure_r_port(struct r_port *info, * Set up ignore/read mask words */ info->read_status_mask = STMRCVROVRH | 0xFF; - if (I_INPCK(info->port.tty)) + if (I_INPCK(tty)) info->read_status_mask |= STMFRAMEH | STMPARITYH; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + if (I_BRKINT(tty) || I_PARMRK(tty)) info->read_status_mask |= STMBREAKH; /* * Characters to ignore */ info->ignore_status_mask = 0; - if (I_IGNPAR(info->port.tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= STMFRAMEH | STMPARITYH; - if (I_IGNBRK(info->port.tty)) { + if (I_IGNBRK(tty)) { info->ignore_status_mask |= STMBREAKH; /* * If we're ignoring parity and break indicators, * ignore overruns too. (For real raw support). */ - if (I_IGNPAR(info->port.tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= STMRCVROVRH; } @@ -864,106 +866,17 @@ static void configure_r_port(struct r_port *info, } } -/* info->port.count is considered critical, protected by spinlocks. */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct r_port *info) +static int carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0, extra_count = 0; - unsigned long flags; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp)) - return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); - if (info->flags & ROCKET_CLOSING) { - if (wait_for_completion_interruptible(&info->close_wait)) - return -ERESTARTSYS; - return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ROCKET_NORMAL_ACTIVE; - return 0; - } - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become free. While we are in - * this loop, info->port.count is dropped by one, so that rp_close() knows when to free things. - * We restore it upon exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->port.open_wait, &wait); -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "block_til_ready before block: ttyR%d, count = %d\n", info->line, info->port.count); -#endif - spin_lock_irqsave(&info->slock, flags); - -#ifdef ROCKET_DISABLE_SIMUSAGE - info->flags |= ROCKET_NORMAL_ACTIVE; -#else - if (!tty_hung_up_p(filp)) { - extra_count = 1; - info->port.count--; - } -#endif - info->port.blocked_open++; - - spin_unlock_irqrestore(&info->slock, flags); - - while (1) { - if (tty->termios->c_cflag & CBAUD) { - sSetDTR(&info->channel); - sSetRTS(&info->channel); - } - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->flags & ROCKET_INITIALIZED)) { - if (info->flags & ROCKET_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(info->flags & ROCKET_CLOSING) && (do_clocal || (sGetChanStatusLo(&info->channel) & CD_ACT))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "block_til_ready blocking: ttyR%d, count = %d, flags=0x%0x\n", - info->line, info->port.count, info->flags); -#endif - schedule(); /* Don't hold spinlock here, will hang PC */ - } - __set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); - - spin_lock_irqsave(&info->slock, flags); - - if (extra_count) - info->port.count++; - info->port.blocked_open--; - - spin_unlock_irqrestore(&info->slock, flags); + struct r_port *info = container_of(port, struct r_port, port); + return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0; +} -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "block_til_ready after blocking: ttyR%d, count = %d\n", - info->line, info->port.count); -#endif - if (retval) - return retval; - info->flags |= ROCKET_NORMAL_ACTIVE; - return 0; +static void raise_dtr_rts(struct tty_port *port) +{ + struct r_port *info = container_of(port, struct r_port, port); + sSetDTR(&info->channel); + sSetRTS(&info->channel); } /* @@ -973,24 +886,26 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, static int rp_open(struct tty_struct *tty, struct file *filp) { struct r_port *info; + struct tty_port *port; int line = 0, retval; CHANNEL_t *cp; unsigned long page; line = tty->index; - if ((line < 0) || (line >= MAX_RP_PORTS) || ((info = rp_table[line]) == NULL)) + if (line < 0 || line >= MAX_RP_PORTS || ((info = rp_table[line]) == NULL)) return -ENXIO; - + port = &info->port; + page = __get_free_page(GFP_KERNEL); if (!page) return -ENOMEM; - if (info->flags & ROCKET_CLOSING) { + if (port->flags & ASYNC_CLOSING) { retval = wait_for_completion_interruptible(&info->close_wait); free_page(page); if (retval) return retval; - return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); + return ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); } /* @@ -1002,9 +917,9 @@ static int rp_open(struct tty_struct *tty, struct file *filp) info->xmit_buf = (unsigned char *) page; tty->driver_data = info; - info->port.tty = tty; + tty_port_tty_set(port, tty); - if (info->port.count++ == 0) { + if (port->count++ == 0) { atomic_inc(&rp_num_ports_open); #ifdef ROCKET_DEBUG_OPEN @@ -1019,7 +934,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) /* * Info->count is now 1; so it's safe to sleep now. */ - if ((info->flags & ROCKET_INITIALIZED) == 0) { + if (!test_bit(ASYNC_INITIALIZED, &port->flags)) { cp = &info->channel; sSetRxTrigger(cp, TRIG_1); if (sGetChanStatus(cp) & CD_ACT) @@ -1043,21 +958,21 @@ static int rp_open(struct tty_struct *tty, struct file *filp) sEnRxFIFO(cp); sEnTransmit(cp); - info->flags |= ROCKET_INITIALIZED; + set_bit(ASYNC_INITIALIZED, &info->port.flags); /* * Set up the tty->alt_speed kludge */ if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - info->port.tty->alt_speed = 57600; + tty->alt_speed = 57600; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - info->port.tty->alt_speed = 115200; + tty->alt_speed = 115200; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - info->port.tty->alt_speed = 230400; + tty->alt_speed = 230400; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - info->port.tty->alt_speed = 460800; + tty->alt_speed = 460800; - configure_r_port(info, NULL); + configure_r_port(tty, info, NULL); if (tty->termios->c_cflag & CBAUD) { sSetDTR(cp); sSetRTS(cp); @@ -1066,7 +981,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) /* Starts (or resets) the maint polling loop */ mod_timer(&rocket_timer, jiffies + POLL_PERIOD); - retval = block_til_ready(tty, filp, info); + retval = tty_port_block_til_ready(port, tty, filp); if (retval) { #ifdef ROCKET_DEBUG_OPEN printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval); @@ -1081,8 +996,8 @@ static int rp_open(struct tty_struct *tty, struct file *filp) */ static void rp_close(struct tty_struct *tty, struct file *filp) { - struct r_port *info = (struct r_port *) tty->driver_data; - unsigned long flags; + struct r_port *info = tty->driver_data; + struct tty_port *port = &info->port; int timeout; CHANNEL_t *cp; @@ -1093,53 +1008,10 @@ static void rp_close(struct tty_struct *tty, struct file *filp) printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count); #endif - if (tty_hung_up_p(filp)) - return; - spin_lock_irqsave(&info->slock, flags); - - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_WARNING "rp_close: bad serial port count; " - "tty->count is 1, info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - if (--info->port.count < 0) { - printk(KERN_WARNING "rp_close: bad serial port count for " - "ttyR%d: %d\n", info->line, info->port.count); - info->port.count = 0; - } - if (info->port.count) { - spin_unlock_irqrestore(&info->slock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - info->flags |= ROCKET_CLOSING; - spin_unlock_irqrestore(&info->slock, flags); cp = &info->channel; - - /* - * Notify the line discpline to only process XON/XOFF characters - */ - tty->closing = 1; - - /* - * If transmission was throttled by the application request, - * just flush the xmit buffer. - */ - if (tty->flow_stopped) - rp_flush_buffer(tty); - - /* - * Wait for the transmit buffer to clear - */ - if (info->port.closing_wait != ROCKET_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->port.closing_wait); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially @@ -1168,19 +1040,24 @@ static void rp_close(struct tty_struct *tty, struct file *filp) clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); + /* We can't yet use tty_port_close_end as the buffer handling in this + driver is a bit different to the usual */ + + if (port->blocked_open) { + if (port->close_delay) { + msleep_interruptible(jiffies_to_msecs(port->close_delay)); } - wake_up_interruptible(&info->port.open_wait); + wake_up_interruptible(&port->open_wait); } else { if (info->xmit_buf) { free_page((unsigned long) info->xmit_buf); info->xmit_buf = NULL; } } - info->flags &= ~(ROCKET_INITIALIZED | ROCKET_CLOSING | ROCKET_NORMAL_ACTIVE); + info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE); tty->closing = 0; + tty_port_tty_set(port, NULL); + wake_up_interruptible(&port->close_wait); complete_all(&info->close_wait); atomic_dec(&rp_num_ports_open); @@ -1195,7 +1072,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp) static void rp_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned cflag; @@ -1213,7 +1090,7 @@ static void rp_set_termios(struct tty_struct *tty, /* Or CMSPAR */ tty->termios->c_cflag &= ~CMSPAR; - configure_r_port(info, old_termios); + configure_r_port(tty, info, old_termios); cp = &info->channel; @@ -1238,7 +1115,7 @@ static void rp_set_termios(struct tty_struct *tty, static int rp_break(struct tty_struct *tty, int break_state) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; unsigned long flags; if (rocket_paranoia_check(info, "rp_break")) @@ -1284,7 +1161,7 @@ static int sGetChanRI(CHANNEL_T * ChP) */ static int rp_tiocmget(struct tty_struct *tty, struct file *file) { - struct r_port *info = (struct r_port *)tty->driver_data; + struct r_port *info = tty->driver_data; unsigned int control, result, ChanStatus; ChanStatus = sGetChanStatusLo(&info->channel); @@ -1305,7 +1182,7 @@ static int rp_tiocmget(struct tty_struct *tty, struct file *file) static int rp_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct r_port *info = (struct r_port *)tty->driver_data; + struct r_port *info = tty->driver_data; if (set & TIOCM_RTS) info->channel.TxControl[3] |= SET_RTS; @@ -1338,7 +1215,8 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo) return 0; } -static int set_config(struct r_port *info, struct rocket_config __user *new_info) +static int set_config(struct tty_struct *tty, struct r_port *info, + struct rocket_config __user *new_info) { struct rocket_config new_serial; @@ -1350,7 +1228,7 @@ static int set_config(struct r_port *info, struct rocket_config __user *new_info if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) return -EPERM; info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK)); - configure_r_port(info, NULL); + configure_r_port(tty, info, NULL); return 0; } @@ -1359,15 +1237,15 @@ static int set_config(struct r_port *info, struct rocket_config __user *new_info info->port.closing_wait = new_serial.closing_wait; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - info->port.tty->alt_speed = 57600; + tty->alt_speed = 57600; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - info->port.tty->alt_speed = 115200; + tty->alt_speed = 115200; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - info->port.tty->alt_speed = 230400; + tty->alt_speed = 230400; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - info->port.tty->alt_speed = 460800; + tty->alt_speed = 460800; - configure_r_port(info, NULL); + configure_r_port(tty, info, NULL); return 0; } @@ -1434,7 +1312,7 @@ static int get_version(struct r_port *info, struct rocket_version __user *retver static int rp_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; void __user *argp = (void __user *)arg; int ret = 0; @@ -1452,7 +1330,7 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file, ret = get_config(info, argp); break; case RCKP_SET_CONFIG: - ret = set_config(info, argp); + ret = set_config(tty, info, argp); break; case RCKP_GET_PORTS: ret = get_ports(info, argp); @@ -1472,7 +1350,7 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file, static void rp_send_xchar(struct tty_struct *tty, char ch) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; if (rocket_paranoia_check(info, "rp_send_xchar")) @@ -1487,7 +1365,7 @@ static void rp_send_xchar(struct tty_struct *tty, char ch) static void rp_throttle(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; #ifdef ROCKET_DEBUG_THROTTLE @@ -1507,7 +1385,7 @@ static void rp_throttle(struct tty_struct *tty) static void rp_unthrottle(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; #ifdef ROCKET_DEBUG_THROTTLE printk(KERN_INFO "unthrottle %s: %d....\n", tty->name, @@ -1534,7 +1412,7 @@ static void rp_unthrottle(struct tty_struct *tty) */ static void rp_stop(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; #ifdef ROCKET_DEBUG_FLOW printk(KERN_INFO "stop %s: %d %d....\n", tty->name, @@ -1550,7 +1428,7 @@ static void rp_stop(struct tty_struct *tty) static void rp_start(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; #ifdef ROCKET_DEBUG_FLOW printk(KERN_INFO "start %s: %d %d....\n", tty->name, @@ -1570,7 +1448,7 @@ static void rp_start(struct tty_struct *tty) */ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned long orig_jiffies; int check_time, exit_time; @@ -1627,7 +1505,7 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) static void rp_hangup(struct tty_struct *tty) { CHANNEL_t *cp; - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; if (rocket_paranoia_check(info, "rp_hangup")) return; @@ -1636,15 +1514,13 @@ static void rp_hangup(struct tty_struct *tty) printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line); #endif rp_flush_buffer(tty); - if (info->flags & ROCKET_CLOSING) + if (info->port.flags & ASYNC_CLOSING) return; if (info->port.count) atomic_dec(&rp_num_ports_open); clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - info->port.count = 0; - info->flags &= ~ROCKET_NORMAL_ACTIVE; - info->port.tty = NULL; + tty_port_hangup(&info->port); cp = &info->channel; sDisRxFIFO(cp); @@ -1653,7 +1529,7 @@ static void rp_hangup(struct tty_struct *tty) sDisCTSFlowCtl(cp); sDisTxSoftFlowCtl(cp); sClrTxXOFF(cp); - info->flags &= ~ROCKET_INITIALIZED; + info->port.flags &= ~ASYNC_INITIALIZED; wake_up_interruptible(&info->port.open_wait); } @@ -1667,7 +1543,7 @@ static void rp_hangup(struct tty_struct *tty) */ static int rp_put_char(struct tty_struct *tty, unsigned char ch) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned long flags; @@ -1714,7 +1590,7 @@ static int rp_put_char(struct tty_struct *tty, unsigned char ch) static int rp_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; const unsigned char *b; int c, retval = 0; @@ -1764,7 +1640,8 @@ static int rp_write(struct tty_struct *tty, /* Write remaining data into the port's xmit_buf */ while (1) { - if (!info->port.tty) /* Seemingly obligatory check... */ + /* Hung up ? */ + if (!test_bit(ASYNC_NORMAL_ACTIVE, &info->port.flags)) goto end; c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1); c = min(c, XMIT_BUF_SIZE - info->xmit_head); @@ -1806,7 +1683,7 @@ end: */ static int rp_write_room(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; int ret; if (rocket_paranoia_check(info, "rp_write_room")) @@ -1827,7 +1704,7 @@ static int rp_write_room(struct tty_struct *tty) */ static int rp_chars_in_buffer(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; if (rocket_paranoia_check(info, "rp_chars_in_buffer")) @@ -1848,7 +1725,7 @@ static int rp_chars_in_buffer(struct tty_struct *tty) */ static void rp_flush_buffer(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned long flags; @@ -2371,6 +2248,11 @@ static const struct tty_operations rocket_ops = { .tiocmset = rp_tiocmset, }; +static const struct tty_port_operations rocket_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + /* * The module "startup" routine; it's run when the module is loaded. */ diff --git a/drivers/char/rocket.h b/drivers/char/rocket.h index a8b09195ebba..ec863f35f1a9 100644 --- a/drivers/char/rocket.h +++ b/drivers/char/rocket.h @@ -39,7 +39,7 @@ struct rocket_version { /* * Rocketport flags */ -#define ROCKET_CALLOUT_NOHUP 0x00000001 +/*#define ROCKET_CALLOUT_NOHUP 0x00000001 */ #define ROCKET_FORCE_CD 0x00000002 #define ROCKET_HUP_NOTIFY 0x00000004 #define ROCKET_SPLIT_TERMIOS 0x00000008 diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h index 21f3ff53ba32..67e0f1e778a2 100644 --- a/drivers/char/rocket_int.h +++ b/drivers/char/rocket_int.h @@ -1162,11 +1162,6 @@ struct r_port { /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 -/* Internal flags used only by the rocketport driver */ -#define ROCKET_INITIALIZED 0x80000000 /* Port is active */ -#define ROCKET_CLOSING 0x40000000 /* Serial port is closing */ -#define ROCKET_NORMAL_ACTIVE 0x20000000 /* Normal port is active */ - /* * Assigned major numbers for the Comtrol Rocketport */ diff --git a/drivers/char/selection.c b/drivers/char/selection.c index 2978a49a172b..f29fbe9b8ed7 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -306,7 +306,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t */ int paste_selection(struct tty_struct *tty) { - struct vc_data *vc = (struct vc_data *)tty->driver_data; + struct vc_data *vc = tty->driver_data; int pasted = 0; unsigned int count; struct tty_ldisc *ld; diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c index 7b0c35207d9b..33872a219df6 100644 --- a/drivers/char/ser_a2232.c +++ b/drivers/char/ser_a2232.c @@ -122,7 +122,7 @@ static void a2232_disable_tx_interrupts(void *ptr); static void a2232_enable_tx_interrupts(void *ptr); static void a2232_disable_rx_interrupts(void *ptr); static void a2232_enable_rx_interrupts(void *ptr); -static int a2232_get_CD(void *ptr); +static int a2232_carrier_raised(struct tty_port *port); static void a2232_shutdown_port(void *ptr); static int a2232_set_real_termios(void *ptr); static int a2232_chars_in_buffer(void *ptr); @@ -148,7 +148,6 @@ static struct real_driver a2232_real_driver = { a2232_enable_tx_interrupts, a2232_disable_rx_interrupts, a2232_enable_rx_interrupts, - a2232_get_CD, a2232_shutdown_port, a2232_set_real_termios, a2232_chars_in_buffer, @@ -260,9 +259,10 @@ static void a2232_enable_rx_interrupts(void *ptr) port->disable_rx = 0; } -static int a2232_get_CD(void *ptr) +static int a2232_carrier_raised(struct tty_port *port) { - return ((struct a2232_port *) ptr)->cd_status; + struct a2232_port *ap = container_of(port, struct a2232_port, gs.port); + return ap->cd_status; } static void a2232_shutdown_port(void *ptr) @@ -460,14 +460,14 @@ static void a2232_throttle(struct tty_struct *tty) if switched on. So the only thing we can do at this layer here is not taking any characters out of the A2232 buffer any more. */ - struct a2232_port *port = (struct a2232_port *) tty->driver_data; + struct a2232_port *port = tty->driver_data; port->throttle_input = -1; } static void a2232_unthrottle(struct tty_struct *tty) { /* Unthrottle: dual to "throttle()" above. */ - struct a2232_port *port = (struct a2232_port *) tty->driver_data; + struct a2232_port *port = tty->driver_data; port->throttle_input = 0; } @@ -638,6 +638,10 @@ int ch, err, n, p; return IRQ_HANDLED; } +static const struct tty_port_operations a2232_port_ops = { + .carrier_raised = a2232_carrier_raised, +}; + static void a2232_init_portstructs(void) { struct a2232_port *port; @@ -645,6 +649,8 @@ static void a2232_init_portstructs(void) for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) { port = a2232_ports + i; + tty_port_init(&port->gs.port); + port->gs.port.ops = &a2232_port_ops; port->which_a2232 = i/NUMLINES; port->which_port_on_a2232 = i%NUMLINES; port->disable_rx = port->throttle_input = port->cd_status = 0; @@ -652,11 +658,6 @@ static void a2232_init_portstructs(void) port->gs.close_delay = HZ/2; port->gs.closing_wait = 30 * HZ; port->gs.rd = &a2232_real_driver; -#ifdef NEW_WRITE_LOCKING - mutex_init(&(port->gs.port_write_mutex)); -#endif - init_waitqueue_head(&port->gs.port.open_wait); - init_waitqueue_head(&port->gs.port.close_wait); } } diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index a8f15e6be594..f1f24f0ee26f 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -315,7 +315,7 @@ u_short write_cy_cmd(volatile u_char * base_addr, u_char cmd) static void cy_stop(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; int channel; unsigned long flags; @@ -337,7 +337,7 @@ static void cy_stop(struct tty_struct *tty) static void cy_start(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; int channel; unsigned long flags; @@ -1062,7 +1062,7 @@ static void config_setup(struct cyclades_port *info) static int cy_put_char(struct tty_struct *tty, unsigned char ch) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_IO @@ -1090,7 +1090,7 @@ static int cy_put_char(struct tty_struct *tty, unsigned char ch) static void cy_flush_chars(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; int channel; @@ -1122,7 +1122,7 @@ static void cy_flush_chars(struct tty_struct *tty) */ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; int c, total = 0; @@ -1166,7 +1166,7 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) static int cy_write_room(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int ret; #ifdef SERIAL_DEBUG_IO @@ -1183,7 +1183,7 @@ static int cy_write_room(struct tty_struct *tty) static int cy_chars_in_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef SERIAL_DEBUG_IO printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt); /* */ @@ -1197,7 +1197,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty) static void cy_flush_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_IO @@ -1218,7 +1218,7 @@ static void cy_flush_buffer(struct tty_struct *tty) */ static void cy_throttle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; int channel; @@ -1250,7 +1250,7 @@ static void cy_throttle(struct tty_struct *tty) static void cy_unthrottle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; int channel; @@ -1345,7 +1345,7 @@ check_and_exit: static int cy_tiocmget(struct tty_struct *tty, struct file *file) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int channel; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; unsigned long flags; @@ -1369,7 +1369,7 @@ static int cy_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int channel; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; unsigned long flags; @@ -1532,7 +1532,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { unsigned long val; - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int ret_val = 0; void __user *argp = (void __user *)arg; @@ -1607,7 +1607,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef SERIAL_DEBUG_OTHER printk("cy_set_termios %s\n", tty->name); @@ -1631,7 +1631,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) static void cy_close(struct tty_struct *tty, struct file *filp) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; /* CP('C'); */ #ifdef SERIAL_DEBUG_OTHER @@ -1698,7 +1698,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp) */ void cy_hangup(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef SERIAL_DEBUG_OTHER printk("cy_hangup %s\n", tty->name); /* */ diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index a16b94f12eb2..3c67c3d83de9 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -1450,7 +1450,7 @@ static int sx_open(struct tty_struct *tty, struct file *filp) static void sx_flush_buffer(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; @@ -1472,7 +1472,7 @@ static void sx_flush_buffer(struct tty_struct *tty) static void sx_close(struct tty_struct *tty, struct file *filp) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; unsigned long timeout; @@ -1585,7 +1585,7 @@ static void sx_close(struct tty_struct *tty, struct file *filp) static int sx_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; int c, total = 0; unsigned long flags; @@ -1637,7 +1637,7 @@ static int sx_write(struct tty_struct *tty, static int sx_put_char(struct tty_struct *tty, unsigned char ch) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; @@ -1676,7 +1676,7 @@ static int sx_put_char(struct tty_struct *tty, unsigned char ch) static void sx_flush_chars(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp = port_Board(port); @@ -1703,7 +1703,7 @@ static void sx_flush_chars(struct tty_struct *tty) static int sx_write_room(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; int ret; func_enter(); @@ -1724,7 +1724,7 @@ static int sx_write_room(struct tty_struct *tty) static int sx_chars_in_buffer(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; func_enter(); @@ -1738,7 +1738,7 @@ static int sx_chars_in_buffer(struct tty_struct *tty) static int sx_tiocmget(struct tty_struct *tty, struct file *file) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned char status; unsigned int result; @@ -1780,7 +1780,7 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file) static int sx_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; @@ -1820,7 +1820,7 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file, static int sx_send_break(struct tty_struct *tty, int length) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp = port_Board(port); unsigned long flags; @@ -1931,7 +1931,7 @@ static int sx_get_serial_info(struct specialix_port *port, static int sx_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; void __user *argp = (void __user *)arg; func_enter(); @@ -1959,7 +1959,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp, static void sx_throttle(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2004,7 +2004,7 @@ static void sx_throttle(struct tty_struct *tty) static void sx_unthrottle(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2045,7 +2045,7 @@ static void sx_unthrottle(struct tty_struct *tty) static void sx_stop(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2072,7 +2072,7 @@ static void sx_stop(struct tty_struct *tty) static void sx_start(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2100,7 +2100,7 @@ static void sx_start(struct tty_struct *tty) static void sx_hangup(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2135,7 +2135,7 @@ static void sx_hangup(struct tty_struct *tty) static void sx_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 963b03fb29e5..e1e0dd89ac9a 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -130,6 +130,8 @@ static char stl_unwanted[SC26198_RXFIFOSIZE]; static DEFINE_MUTEX(stl_brdslock); static struct stlbrd *stl_brds[STL_MAXBRDS]; +static const struct tty_port_operations stl_port_ops; + /* * Per board state flags. Used with the state field of the board struct. * Not really much here! @@ -407,7 +409,6 @@ static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, uns static int stl_brdinit(struct stlbrd *brdp); static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp); static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp); -static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp, struct file *filp); /* * CD1400 uart specific handling functions. @@ -703,8 +704,9 @@ static int stl_open(struct tty_struct *tty, struct file *filp) { struct stlport *portp; struct stlbrd *brdp; + struct tty_port *port; unsigned int minordev, brdnr, panelnr; - int portnr, rc; + int portnr; pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty, filp, tty->name); @@ -715,6 +717,7 @@ static int stl_open(struct tty_struct *tty, struct file *filp) brdp = stl_brds[brdnr]; if (brdp == NULL) return -ENODEV; + minordev = MINOR2PORT(minordev); for (portnr = -1, panelnr = 0; panelnr < STL_MAXPANELS; panelnr++) { if (brdp->panels[panelnr] == NULL) @@ -731,16 +734,17 @@ static int stl_open(struct tty_struct *tty, struct file *filp) portp = brdp->panels[panelnr]->ports[portnr]; if (portp == NULL) return -ENODEV; + port = &portp->port; /* * On the first open of the device setup the port hardware, and * initialize the per port data structure. */ - tty_port_tty_set(&portp->port, tty); + tty_port_tty_set(port, tty); tty->driver_data = portp; - portp->port.count++; + port->count++; - if ((portp->port.flags & ASYNC_INITIALIZED) == 0) { + if ((port->flags & ASYNC_INITIALIZED) == 0) { if (!portp->tx.buf) { portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); if (!portp->tx.buf) @@ -754,91 +758,24 @@ static int stl_open(struct tty_struct *tty, struct file *filp) stl_enablerxtx(portp, 1, 1); stl_startrxtx(portp, 1, 0); clear_bit(TTY_IO_ERROR, &tty->flags); - portp->port.flags |= ASYNC_INITIALIZED; - } - -/* - * Check if this port is in the middle of closing. If so then wait - * until it is closed then return error status, based on flag settings. - * The sleep here does not need interrupt protection since the wakeup - * for it is done with the same context. - */ - if (portp->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&portp->port.close_wait); - if (portp->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - return -ERESTARTSYS; + port->flags |= ASYNC_INITIALIZED; } - -/* - * Based on type of open being done check if it can overlap with any - * previous opens still in effect. If we are a normal serial device - * then also we might have to wait for carrier. - */ - if (!(filp->f_flags & O_NONBLOCK)) - if ((rc = stl_waitcarrier(tty, portp, filp)) != 0) - return rc; - - portp->port.flags |= ASYNC_NORMAL_ACTIVE; - - return 0; + return tty_port_block_til_ready(port, tty, filp); } /*****************************************************************************/ -/* - * Possibly need to wait for carrier (DCD signal) to come high. Say - * maybe because if we are clocal then we don't need to wait... - */ - -static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp, - struct file *filp) +static int stl_carrier_raised(struct tty_port *port) { - unsigned long flags; - int rc, doclocal; - - pr_debug("stl_waitcarrier(portp=%p,filp=%p)\n", portp, filp); - - rc = 0; - doclocal = 0; - - spin_lock_irqsave(&stallion_lock, flags); - - if (tty->termios->c_cflag & CLOCAL) - doclocal++; - - portp->openwaitcnt++; - if (! tty_hung_up_p(filp)) - portp->port.count--; - - for (;;) { - /* Takes brd_lock internally */ - stl_setsignals(portp, 1, 1); - if (tty_hung_up_p(filp) || - ((portp->port.flags & ASYNC_INITIALIZED) == 0)) { - if (portp->port.flags & ASYNC_HUP_NOTIFY) - rc = -EBUSY; - else - rc = -ERESTARTSYS; - break; - } - if (((portp->port.flags & ASYNC_CLOSING) == 0) && - (doclocal || (portp->sigs & TIOCM_CD))) - break; - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - /* FIXME */ - interruptible_sleep_on(&portp->port.open_wait); - } - - if (! tty_hung_up_p(filp)) - portp->port.count++; - portp->openwaitcnt--; - spin_unlock_irqrestore(&stallion_lock, flags); + struct stlport *portp = container_of(port, struct stlport, port); + return (portp->sigs & TIOCM_CD) ? 1 : 0; +} - return rc; +static void stl_raise_dtr_rts(struct tty_port *port) +{ + struct stlport *portp = container_of(port, struct stlport, port); + /* Takes brd_lock internally */ + stl_setsignals(portp, 1, 1); } /*****************************************************************************/ @@ -890,47 +827,29 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout) static void stl_close(struct tty_struct *tty, struct file *filp) { struct stlport *portp; + struct tty_port *port; unsigned long flags; pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); portp = tty->driver_data; - if (portp == NULL) - return; + BUG_ON(portp == NULL); - spin_lock_irqsave(&stallion_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&stallion_lock, flags); - return; - } - if ((tty->count == 1) && (portp->port.count != 1)) - portp->port.count = 1; - if (portp->port.count-- > 1) { - spin_unlock_irqrestore(&stallion_lock, flags); - return; - } - - portp->port.count = 0; - portp->port.flags |= ASYNC_CLOSING; + port = &portp->port; + if (tty_port_close_start(port, tty, filp) == 0) + return; /* * May want to wait for any data to drain before closing. The BUSY * flag keeps track of whether we are still sending or not - it is * very accurate for the cd1400, not quite so for the sc26198. * (The sc26198 has no "end-of-data" interrupt only empty FIFO) */ - tty->closing = 1; - - spin_unlock_irqrestore(&stallion_lock, flags); - - if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, portp->closing_wait); stl_waituntilsent(tty, (HZ / 2)); - - spin_lock_irqsave(&stallion_lock, flags); + spin_lock_irqsave(&port->lock, flags); portp->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&stallion_lock, flags); + spin_unlock_irqrestore(&port->lock, flags); stl_disableintrs(portp); if (tty->termios->c_cflag & HUPCL) @@ -944,20 +863,9 @@ static void stl_close(struct tty_struct *tty, struct file *filp) portp->tx.head = NULL; portp->tx.tail = NULL; } - set_bit(TTY_IO_ERROR, &tty->flags); - tty_ldisc_flush(tty); - tty->closing = 0; - tty_port_tty_set(&portp->port, NULL); - - if (portp->openwaitcnt) { - if (portp->close_delay) - msleep_interruptible(jiffies_to_msecs(portp->close_delay)); - wake_up_interruptible(&portp->port.open_wait); - } - - portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&portp->port.close_wait); + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } /*****************************************************************************/ @@ -1405,14 +1313,20 @@ static void stl_stop(struct tty_struct *tty) static void stl_hangup(struct tty_struct *tty) { struct stlport *portp; + struct tty_port *port; + unsigned long flags; pr_debug("stl_hangup(tty=%p)\n", tty); portp = tty->driver_data; if (portp == NULL) return; + port = &portp->port; + + spin_lock_irqsave(&port->lock, flags); + port->flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->lock, flags); - portp->port.flags &= ~ASYNC_INITIALIZED; stl_disableintrs(portp); if (tty->termios->c_cflag & HUPCL) stl_setsignals(portp, 0, 0); @@ -1426,10 +1340,7 @@ static void stl_hangup(struct tty_struct *tty) portp->tx.head = NULL; portp->tx.tail = NULL; } - tty_port_tty_set(&portp->port, NULL); - portp->port.flags &= ~ASYNC_NORMAL_ACTIVE; - portp->port.count = 0; - wake_up_interruptible(&portp->port.open_wait); + tty_port_hangup(port); } /*****************************************************************************/ @@ -1776,6 +1687,7 @@ static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp) break; } tty_port_init(&portp->port); + portp->port.ops = &stl_port_ops; portp->magic = STL_PORTMAGIC; portp->portnr = i; portp->brdnr = panelp->brdnr; @@ -2659,6 +2571,11 @@ static const struct tty_operations stl_ops = { .tiocmset = stl_tiocmset, }; +static const struct tty_port_operations stl_port_ops = { + .carrier_raised = stl_carrier_raised, + .raise_dtr_rts = stl_raise_dtr_rts, +}; + /*****************************************************************************/ /* CD1400 HARDWARE FUNCTIONS */ /*****************************************************************************/ diff --git a/drivers/char/sx.c b/drivers/char/sx.c index ba4e86281fbf..b60be7b0decf 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -279,7 +279,7 @@ static void sx_disable_tx_interrupts(void *ptr); static void sx_enable_tx_interrupts(void *ptr); static void sx_disable_rx_interrupts(void *ptr); static void sx_enable_rx_interrupts(void *ptr); -static int sx_get_CD(void *ptr); +static int sx_carrier_raised(struct tty_port *port); static void sx_shutdown_port(void *ptr); static int sx_set_real_termios(void *ptr); static void sx_close(void *ptr); @@ -360,7 +360,6 @@ static struct real_driver sx_real_driver = { sx_enable_tx_interrupts, sx_disable_rx_interrupts, sx_enable_rx_interrupts, - sx_get_CD, sx_shutdown_port, sx_set_real_termios, sx_chars_in_buffer, @@ -791,7 +790,7 @@ static int sx_getsignals(struct sx_port *port) sx_dprintk(SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d (%d/%d) " "%02x/%02x\n", (o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0, - port->c_dcd, sx_get_CD(port), + port->c_dcd, tty_port_carrier_raised(&port->gs.port), sx_read_channel_byte(port, hi_ip), sx_read_channel_byte(port, hi_state)); @@ -1190,7 +1189,7 @@ static inline void sx_check_modem_signals(struct sx_port *port) hi_state = sx_read_channel_byte(port, hi_state); sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n", - port->c_dcd, sx_get_CD(port)); + port->c_dcd, tty_port_carrier_raised(&port->gs.port)); if (hi_state & ST_BREAK) { hi_state &= ~ST_BREAK; @@ -1202,11 +1201,11 @@ static inline void sx_check_modem_signals(struct sx_port *port) hi_state &= ~ST_DCD; sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n"); sx_write_channel_byte(port, hi_state, hi_state); - c_dcd = sx_get_CD(port); + c_dcd = tty_port_carrier_raised(&port->gs.port); sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd); if (c_dcd != port->c_dcd) { port->c_dcd = c_dcd; - if (sx_get_CD(port)) { + if (tty_port_carrier_raised(&port->gs.port)) { /* DCD went UP */ if ((sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED) && @@ -1415,13 +1414,10 @@ static void sx_enable_rx_interrupts(void *ptr) } /* Jeez. Isn't this simple? */ -static int sx_get_CD(void *ptr) +static int sx_carrier_raised(struct tty_port *port) { - struct sx_port *port = ptr; - func_enter2(); - - func_exit(); - return ((sx_read_channel_byte(port, hi_ip) & IP_DCD) != 0); + struct sx_port *sp = container_of(port, struct sx_port, gs.port); + return ((sx_read_channel_byte(sp, hi_ip) & IP_DCD) != 0); } /* Jeez. Isn't this simple? */ @@ -1536,7 +1532,7 @@ static int sx_open(struct tty_struct *tty, struct file *filp) } /* tty->low_latency = 1; */ - port->c_dcd = sx_get_CD(port); + port->c_dcd = sx_carrier_raised(&port->gs.port); sx_dprintk(SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd); func_exit(); @@ -1945,7 +1941,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp, static void sx_throttle(struct tty_struct *tty) { - struct sx_port *port = (struct sx_port *)tty->driver_data; + struct sx_port *port = tty->driver_data; func_enter2(); /* If the port is using any type of input flow @@ -1959,7 +1955,7 @@ static void sx_throttle(struct tty_struct *tty) static void sx_unthrottle(struct tty_struct *tty) { - struct sx_port *port = (struct sx_port *)tty->driver_data; + struct sx_port *port = tty->driver_data; func_enter2(); /* Always unthrottle even if flow control is not enabled on @@ -2354,6 +2350,10 @@ static const struct tty_operations sx_ops = { .tiocmset = sx_tiocmset, }; +static const struct tty_port_operations sx_port_ops = { + .carrier_raised = sx_carrier_raised, +}; + static int sx_init_drivers(void) { int error; @@ -2410,6 +2410,7 @@ static int sx_init_portstructs(int nboards, int nports) for (j = 0; j < boards[i].nports; j++) { sx_dprintk(SX_DEBUG_INIT, "initing port %d\n", j); tty_port_init(&port->gs.port); + port->gs.port.ops = &sx_port_ops; port->gs.magic = SX_MAGIC; port->gs.close_delay = HZ / 2; port->gs.closing_wait = 30 * HZ; diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 500f5176b6ba..b8063d4cad32 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -977,7 +977,7 @@ static void ldisc_receive_buf(struct tty_struct *tty, */ static void mgsl_stop(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (mgsl_paranoia_check(info, tty->name, "mgsl_stop")) @@ -1000,7 +1000,7 @@ static void mgsl_stop(struct tty_struct *tty) */ static void mgsl_start(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (mgsl_paranoia_check(info, tty->name, "mgsl_start")) @@ -2057,7 +2057,7 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch) */ static void mgsl_flush_chars(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if ( debug_level >= DEBUG_LEVEL_INFO ) @@ -2109,7 +2109,7 @@ static int mgsl_write(struct tty_struct * tty, const unsigned char *buf, int count) { int c, ret = 0; - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if ( debug_level >= DEBUG_LEVEL_INFO ) @@ -2232,7 +2232,7 @@ cleanup: */ static int mgsl_write_room(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; int ret; if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room")) @@ -2267,7 +2267,7 @@ static int mgsl_write_room(struct tty_struct *tty) */ static int mgsl_chars_in_buffer(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_chars_in_buffer(%s)\n", @@ -2301,7 +2301,7 @@ static int mgsl_chars_in_buffer(struct tty_struct *tty) */ static void mgsl_flush_buffer(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2329,7 +2329,7 @@ static void mgsl_flush_buffer(struct tty_struct *tty) */ static void mgsl_send_xchar(struct tty_struct *tty, char ch) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2358,7 +2358,7 @@ static void mgsl_send_xchar(struct tty_struct *tty, char ch) */ static void mgsl_throttle(struct tty_struct * tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2388,7 +2388,7 @@ static void mgsl_throttle(struct tty_struct * tty) */ static void mgsl_unthrottle(struct tty_struct * tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2841,7 +2841,7 @@ static int modem_input_wait(struct mgsl_struct *info,int arg) */ static int tiocmget(struct tty_struct *tty, struct file *file) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned int result; unsigned long flags; @@ -2867,7 +2867,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file) static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2898,7 +2898,7 @@ static int tiocmset(struct tty_struct *tty, struct file *file, */ static int mgsl_break(struct tty_struct *tty, int break_state) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2932,7 +2932,7 @@ static int mgsl_break(struct tty_struct *tty, int break_state) static int mgsl_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; int ret; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3042,7 +3042,7 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne */ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3096,7 +3096,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio */ static void mgsl_close(struct tty_struct *tty, struct file * filp) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; if (mgsl_paranoia_check(info, tty->name, "mgsl_close")) return; @@ -3104,70 +3104,18 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_close(%s) entry, count=%d\n", __FILE__,__LINE__, info->device_name, info->port.count); - - if (!info->port.count) - return; - if (tty_hung_up_p(filp)) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - printk("mgsl_close: bad refcount; tty->count is 1, " - "info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) - goto cleanup; - - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_close(%s) calling tty_wait_until_sent\n", - __FILE__,__LINE__, info->device_name ); - tty_wait_until_sent(tty, info->port.closing_wait); - } - if (info->port.flags & ASYNC_INITIALIZED) mgsl_wait_until_sent(tty, info->timeout); - mgsl_flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - - tty->closing = 0; + + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__, @@ -3188,7 +3136,7 @@ cleanup: */ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; unsigned long orig_jiffies, char_time; if (!info ) @@ -3261,7 +3209,7 @@ exit: */ static void mgsl_hangup(struct tty_struct *tty) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_hangup(%s)\n", @@ -3281,6 +3229,35 @@ static void mgsl_hangup(struct tty_struct *tty) } /* end of mgsl_hangup() */ +/* + * carrier_raised() + * + * Return true if carrier is raised + */ + +static int carrier_raised(struct tty_port *port) +{ + unsigned long flags; + struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); + + spin_lock_irqsave(&info->irq_spinlock, flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock, flags); + return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; +} + +static void raise_dtr_rts(struct tty_port *port) +{ + struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + + /* block_til_ready() * * Block the current process until the specified port @@ -3302,6 +3279,8 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, bool do_clocal = false; bool extra_count = false; unsigned long flags; + int dcd; + struct tty_port *port = &info->port; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready on %s\n", @@ -3309,7 +3288,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ /* nonblock mode is set or port is not enabled */ - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -3318,50 +3297,42 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * mgsl_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready before block on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); spin_lock_irqsave(&info->irq_spinlock, flags); if (!tty_hung_up_p(filp)) { extra_count = true; - info->port.count--; + port->count--; } spin_unlock_irqrestore(&info->irq_spinlock, flags); - info->port.blocked_open++; + port->blocked_open++; while (1) { - if (tty->termios->c_cflag & CBAUD) { - spin_lock_irqsave(&info->irq_spinlock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){ - retval = (info->port.flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; break; } - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_get_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); + dcd = tty_port_carrier_raised(&info->port); - if (!(info->port.flags & ASYNC_CLOSING) && - (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd)) break; - } if (signal_pending(current)) { retval = -ERESTARTSYS; @@ -3370,24 +3341,25 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); schedule(); } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); + /* FIXME: Racy on hangup during close wait */ if (extra_count) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready after blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); if (!retval) - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return retval; @@ -4304,6 +4276,12 @@ static void mgsl_add_device( struct mgsl_struct *info ) } /* end of mgsl_add_device() */ +static const struct tty_port_operations mgsl_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + + /* mgsl_allocate_device() * * Allocate and initialize a device instance structure @@ -4322,6 +4300,7 @@ static struct mgsl_struct* mgsl_allocate_device(void) printk("Error can't allocate device instance data\n"); } else { tty_port_init(&info->port); + info->port.ops = &mgsl_port_ops; info->magic = MGSL_MAGIC; INIT_WORK(&info->task, mgsl_bh_handler); info->max_frame_size = 4096; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 08911ed66494..53544e21f191 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -720,44 +720,9 @@ static void close(struct tty_struct *tty, struct file *filp) return; DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count)); - if (!info->port.count) - return; - - if (tty_hung_up_p(filp)) - goto cleanup; - - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - DBGERR(("%s close: bad refcount; tty->count=1, " - "info->port.count=%d\n", info->device_name, info->port.count)); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - DBGINFO(("%s call tty_wait_until_sent\n", info->device_name)); - tty_wait_until_sent(tty, info->port.closing_wait); - } - if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); @@ -765,20 +730,8 @@ static void close(struct tty_struct *tty, struct file *filp) shutdown(info); - tty->closing = 0; + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count)); } @@ -3132,6 +3085,29 @@ static int tiocmset(struct tty_struct *tty, struct file *file, return 0; } +static int carrier_raised(struct tty_port *port) +{ + unsigned long flags; + struct slgt_info *info = container_of(port, struct slgt_info, port); + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + return (info->signals & SerialSignal_DCD) ? 1 : 0; +} + +static void raise_dtr_rts(struct tty_port *port) +{ + unsigned long flags; + struct slgt_info *info = container_of(port, struct slgt_info, port); + + spin_lock_irqsave(&info->lock,flags); + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); +} + + /* * block current process until the device is ready to open */ @@ -3143,12 +3119,14 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, bool do_clocal = false; bool extra_count = false; unsigned long flags; + int cd; + struct tty_port *port = &info->port; DBGINFO(("%s block_til_ready\n", tty->driver->name)); if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ /* nonblock mode is set or port is not enabled */ - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -3157,46 +3135,38 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); spin_lock_irqsave(&info->lock, flags); if (!tty_hung_up_p(filp)) { extra_count = true; - info->port.count--; + port->count--; } spin_unlock_irqrestore(&info->lock, flags); - info->port.blocked_open++; + port->blocked_open++; while (1) { - if ((tty->termios->c_cflag & CBAUD)) { - spin_lock_irqsave(&info->lock,flags); - info->signals |= SerialSignal_RTS + SerialSignal_DTR; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } + if ((tty->termios->c_cflag & CBAUD)) + tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){ - retval = (info->port.flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; break; } - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + cd = tty_port_carrier_raised(port); - if (!(info->port.flags & ASYNC_CLOSING) && - (do_clocal || (info->signals & SerialSignal_DCD)) ) { + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd )) break; - } if (signal_pending(current)) { retval = -ERESTARTSYS; @@ -3208,14 +3178,14 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); if (extra_count) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; if (!retval) - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval)); return retval; @@ -3444,6 +3414,11 @@ static void add_device(struct slgt_info *info) #endif } +static const struct tty_port_operations slgt_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + /* * allocate device instance structure, return NULL on failure */ @@ -3458,6 +3433,7 @@ static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev driver_name, adapter_num, port_num)); } else { tty_port_init(&info->port); + info->port.ops = &slgt_port_ops; info->magic = MGSL_MAGIC; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 6bdb44f7bec2..7b0c5b2dd263 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -558,6 +558,7 @@ static void release_resources(SLMP_INFO *info); static int startup(SLMP_INFO *info); static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info); +static int carrier_raised(struct tty_port *port); static void shutdown(SLMP_INFO *info); static void program_hw(SLMP_INFO *info); static void change_params(SLMP_INFO *info); @@ -800,7 +801,7 @@ cleanup: */ static void close(struct tty_struct *tty, struct file *filp) { - SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO * info = tty->driver_data; if (sanity_check(info, tty->name, "close")) return; @@ -809,70 +810,18 @@ static void close(struct tty_struct *tty, struct file *filp) printk("%s(%d):%s close() entry, count=%d\n", __FILE__,__LINE__, info->device_name, info->port.count); - if (!info->port.count) - return; - - if (tty_hung_up_p(filp)) - goto cleanup; - - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - printk("%s(%d):%s close: bad refcount; tty->count is 1, " - "info->port.count is %d\n", - __FILE__,__LINE__, info->device_name, info->port.count); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s close() calling tty_wait_until_sent\n", - __FILE__,__LINE__, info->device_name ); - tty_wait_until_sent(tty, info->port.closing_wait); - } - + if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - tty->closing = 0; + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, @@ -884,7 +833,7 @@ cleanup: */ static void hangup(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s hangup()\n", @@ -907,7 +856,7 @@ static void hangup(struct tty_struct *tty) */ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -960,7 +909,7 @@ static int write(struct tty_struct *tty, const unsigned char *buf, int count) { int c, ret = 0; - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1038,7 +987,7 @@ cleanup: */ static int put_char(struct tty_struct *tty, unsigned char ch) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; int ret = 0; @@ -1075,7 +1024,7 @@ static int put_char(struct tty_struct *tty, unsigned char ch) */ static void send_xchar(struct tty_struct *tty, char ch) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1099,7 +1048,7 @@ static void send_xchar(struct tty_struct *tty, char ch) */ static void wait_until_sent(struct tty_struct *tty, int timeout) { - SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO * info = tty->driver_data; unsigned long orig_jiffies, char_time; if (!info ) @@ -1166,7 +1115,7 @@ exit: */ static int write_room(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; int ret; if (sanity_check(info, tty->name, "write_room")) @@ -1193,7 +1142,7 @@ static int write_room(struct tty_struct *tty) */ static void flush_chars(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if ( debug_level >= DEBUG_LEVEL_INFO ) @@ -1232,7 +1181,7 @@ static void flush_chars(struct tty_struct *tty) */ static void flush_buffer(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1254,7 +1203,7 @@ static void flush_buffer(struct tty_struct *tty) */ static void tx_hold(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (sanity_check(info, tty->name, "tx_hold")) @@ -1274,7 +1223,7 @@ static void tx_hold(struct tty_struct *tty) */ static void tx_release(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (sanity_check(info, tty->name, "tx_release")) @@ -1304,7 +1253,7 @@ static void tx_release(struct tty_struct *tty) static int do_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; int error; struct mgsl_icount cnow; /* kernel counter temps */ struct serial_icounter_struct __user *p_cuser; /* user space */ @@ -1515,7 +1464,7 @@ done: */ static int chars_in_buffer(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; if (sanity_check(info, tty->name, "chars_in_buffer")) return 0; @@ -1531,7 +1480,7 @@ static int chars_in_buffer(struct tty_struct *tty) */ static void throttle(struct tty_struct * tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1556,7 +1505,7 @@ static void throttle(struct tty_struct * tty) */ static void unthrottle(struct tty_struct * tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1587,7 +1536,7 @@ static void unthrottle(struct tty_struct * tty) static int set_break(struct tty_struct *tty, int break_state) { unsigned char RegValue; - SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO * info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3269,7 +3218,7 @@ static int modem_input_wait(SLMP_INFO *info,int arg) */ static int tiocmget(struct tty_struct *tty, struct file *file) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned int result; unsigned long flags; @@ -3295,7 +3244,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file) static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3318,7 +3267,28 @@ static int tiocmset(struct tty_struct *tty, struct file *file, return 0; } +static int carrier_raised(struct tty_port *port) +{ + SLMP_INFO *info = container_of(port, SLMP_INFO, port); + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; +} + +static void raise_dtr_rts(struct tty_port *port) +{ + SLMP_INFO *info = container_of(port, SLMP_INFO, port); + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); +} /* Block the current process until the specified port is ready to open. */ @@ -3330,6 +3300,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, bool do_clocal = false; bool extra_count = false; unsigned long flags; + int cd; + struct tty_port *port = &info->port; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready()\n", @@ -3338,7 +3310,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ /* nonblock mode is set or port is not enabled */ /* just verify that callout device is not active */ - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -3347,50 +3319,42 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready() before block, count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); spin_lock_irqsave(&info->lock, flags); if (!tty_hung_up_p(filp)) { extra_count = true; - info->port.count--; + port->count--; } spin_unlock_irqrestore(&info->lock, flags); - info->port.blocked_open++; + port->blocked_open++; while (1) { - if ((tty->termios->c_cflag & CBAUD)) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){ - retval = (info->port.flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; break; } - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + cd = tty_port_carrier_raised(port); - if (!(info->port.flags & ASYNC_CLOSING) && - (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd)) break; - } if (signal_pending(current)) { retval = -ERESTARTSYS; @@ -3399,24 +3363,24 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready() count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); schedule(); } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); if (extra_count) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready() after, count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); if (!retval) - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return retval; } @@ -3782,6 +3746,11 @@ static void add_device(SLMP_INFO *info) #endif } +static const struct tty_port_operations port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + /* Allocate and initialize a device instance structure * * Return Value: pointer to SLMP_INFO if success, otherwise NULL @@ -3798,6 +3767,7 @@ static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) __FILE__,__LINE__, adapter_num, port_num); } else { tty_port_init(&info->port); + info->port.ops = &port_ops; info->magic = MGSL_MAGIC; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; @@ -3940,6 +3910,7 @@ static const struct tty_operations ops = { .tiocmset = tiocmset, }; + static void synclinkmp_cleanup(void) { int rc; diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index db15f9ba7c0b..d33e5ab06177 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1111,9 +1111,7 @@ void tty_write_message(struct tty_struct *tty, char *msg) * Locks the line discipline as required * Writes to the tty driver are serialized by the atomic_write_lock * and are then processed in chunks to the device. The line discipline - * write method will not be involked in parallel for each device - * The line discipline write method is called under the big - * kernel lock for historical reasons. New code should not rely on this. + * write method will not be invoked in parallel for each device. */ static ssize_t tty_write(struct file *file, const char __user *buf, @@ -1213,7 +1211,7 @@ static void tty_line_name(struct tty_driver *driver, int index, char *p) * be held until the 'fast-open' is also done. Will change once we * have refcounting in the driver and per driver locking */ -struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, +static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, struct inode *inode, int idx) { struct tty_struct *tty; @@ -2050,7 +2048,6 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) /** * tty_do_resize - resize event * @tty: tty being resized - * @real_tty: real tty (not the same as tty if using a pty/tty pair) * @rows: rows (character) * @cols: cols (character) * @@ -2058,41 +2055,34 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) * peform a terminal resize correctly */ -int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize *ws) +int tty_do_resize(struct tty_struct *tty, struct winsize *ws) { - struct pid *pgrp, *rpgrp; + struct pid *pgrp; unsigned long flags; - /* For a PTY we need to lock the tty side */ - mutex_lock(&real_tty->termios_mutex); - if (!memcmp(ws, &real_tty->winsize, sizeof(*ws))) + /* Lock the tty */ + mutex_lock(&tty->termios_mutex); + if (!memcmp(ws, &tty->winsize, sizeof(*ws))) goto done; /* Get the PID values and reference them so we can avoid holding the tty ctrl lock while sending signals */ spin_lock_irqsave(&tty->ctrl_lock, flags); pgrp = get_pid(tty->pgrp); - rpgrp = get_pid(real_tty->pgrp); spin_unlock_irqrestore(&tty->ctrl_lock, flags); if (pgrp) kill_pgrp(pgrp, SIGWINCH, 1); - if (rpgrp != pgrp && rpgrp) - kill_pgrp(rpgrp, SIGWINCH, 1); - put_pid(pgrp); - put_pid(rpgrp); tty->winsize = *ws; - real_tty->winsize = *ws; done: - mutex_unlock(&real_tty->termios_mutex); + mutex_unlock(&tty->termios_mutex); return 0; } /** * tiocswinsz - implement window size set ioctl - * @tty; tty + * @tty; tty side of tty * @arg: user buffer for result * * Copies the user idea of the window size to the kernel. Traditionally @@ -2105,17 +2095,16 @@ done: * then calls into the default method. */ -static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize __user *arg) +static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg) { struct winsize tmp_ws; if (copy_from_user(&tmp_ws, arg, sizeof(*arg))) return -EFAULT; if (tty->ops->resize) - return tty->ops->resize(tty, real_tty, &tmp_ws); + return tty->ops->resize(tty, &tmp_ws); else - return tty_do_resize(tty, real_tty, &tmp_ws); + return tty_do_resize(tty, &tmp_ws); } /** @@ -2540,7 +2529,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCGWINSZ: return tiocgwinsz(real_tty, p); case TIOCSWINSZ: - return tiocswinsz(tty, real_tty, p); + return tiocswinsz(real_tty, p); case TIOCCONS: return real_tty != tty ? -EINVAL : tioccons(file); case FIONBIO: @@ -2785,6 +2774,8 @@ void initialize_tty_struct(struct tty_struct *tty, INIT_WORK(&tty->hangup_work, do_tty_hangup); mutex_init(&tty->atomic_read_lock); mutex_init(&tty->atomic_write_lock); + mutex_init(&tty->output_lock); + mutex_init(&tty->echo_lock); spin_lock_init(&tty->read_lock); spin_lock_init(&tty->ctrl_lock); INIT_LIST_HEAD(&tty->tty_files); diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index f307f135cbfb..7a84b406a952 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -316,8 +316,7 @@ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) { /* wait_event is a macro */ wait_event(tty_ldisc_wait, tty_ldisc_try(tty)); - if (tty->ldisc.refcount == 0) - printk(KERN_ERR "tty_ldisc_ref_wait\n"); + WARN_ON(tty->ldisc.refcount == 0); return &tty->ldisc; } @@ -376,15 +375,17 @@ EXPORT_SYMBOL_GPL(tty_ldisc_deref); * @tty: terminal to activate ldisc on * * Set the TTY_LDISC flag when the line discipline can be called - * again. Do necessary wakeups for existing sleepers. + * again. Do necessary wakeups for existing sleepers. Clear the LDISC + * changing flag to indicate any ldisc change is now over. * - * Note: nobody should set this bit except via this function. Clearing - * directly is allowed. + * Note: nobody should set the TTY_LDISC bit except via this function. + * Clearing directly is allowed. */ void tty_ldisc_enable(struct tty_struct *tty) { set_bit(TTY_LDISC, &tty->flags); + clear_bit(TTY_LDISC_CHANGING, &tty->flags); wake_up(&tty_ldisc_wait); } @@ -496,7 +497,14 @@ restart: * reference to the line discipline. The TTY_LDISC bit * prevents anyone taking a reference once it is clear. * We need the lock to avoid racing reference takers. + * + * We must clear the TTY_LDISC bit here to avoid a livelock + * with a userspace app continually trying to use the tty in + * parallel to the change and re-referencing the tty. */ + clear_bit(TTY_LDISC, &tty->flags); + if (o_tty) + clear_bit(TTY_LDISC, &o_tty->flags); spin_lock_irqsave(&tty_ldisc_lock, flags); if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) { @@ -528,7 +536,7 @@ restart: * If the TTY_LDISC bit is set, then we are racing against * another ldisc change */ - if (!test_bit(TTY_LDISC, &tty->flags)) { + if (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { struct tty_ldisc *ld; spin_unlock_irqrestore(&tty_ldisc_lock, flags); tty_ldisc_put(new_ldisc.ops); @@ -536,10 +544,14 @@ restart: tty_ldisc_deref(ld); goto restart; } - - clear_bit(TTY_LDISC, &tty->flags); + /* + * This flag is used to avoid two parallel ldisc changes. Once + * open and close are fine grained locked this may work better + * as a mutex shared with the open/close/hup paths + */ + set_bit(TTY_LDISC_CHANGING, &tty->flags); if (o_tty) - clear_bit(TTY_LDISC, &o_tty->flags); + set_bit(TTY_LDISC_CHANGING, &o_tty->flags); spin_unlock_irqrestore(&tty_ldisc_lock, flags); /* diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index c8f8024cb40e..9b8004c72686 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -7,6 +7,7 @@ #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> +#include <linux/serial.h> #include <linux/timer.h> #include <linux/string.h> #include <linux/slab.h> @@ -94,3 +95,227 @@ void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty) spin_unlock_irqrestore(&port->lock, flags); } EXPORT_SYMBOL(tty_port_tty_set); + +/** + * tty_port_hangup - hangup helper + * @port: tty port + * + * Perform port level tty hangup flag and count changes. Drop the tty + * reference. + */ + +void tty_port_hangup(struct tty_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + port->count = 0; + port->flags &= ~ASYNC_NORMAL_ACTIVE; + if (port->tty) + tty_kref_put(port->tty); + port->tty = NULL; + spin_unlock_irqrestore(&port->lock, flags); + wake_up_interruptible(&port->open_wait); +} +EXPORT_SYMBOL(tty_port_hangup); + +/** + * tty_port_carrier_raised - carrier raised check + * @port: tty port + * + * Wrapper for the carrier detect logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ + +int tty_port_carrier_raised(struct tty_port *port) +{ + if (port->ops->carrier_raised == NULL) + return 1; + return port->ops->carrier_raised(port); +} +EXPORT_SYMBOL(tty_port_carrier_raised); + +/** + * tty_port_raise_dtr_rts - Riase DTR/RTS + * @port: tty port + * + * Wrapper for the DTR/RTS raise logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ + +void tty_port_raise_dtr_rts(struct tty_port *port) +{ + if (port->ops->raise_dtr_rts) + port->ops->raise_dtr_rts(port); +} +EXPORT_SYMBOL(tty_port_raise_dtr_rts); + +/** + * tty_port_block_til_ready - Waiting logic for tty open + * @port: the tty port being opened + * @tty: the tty device being bound + * @filp: the file pointer of the opener + * + * Implement the core POSIX/SuS tty behaviour when opening a tty device. + * Handles: + * - hangup (both before and during) + * - non blocking open + * - rts/dtr/dcd + * - signals + * - port flags and counts + * + * The passed tty_port must implement the carrier_raised method if it can + * do carrier detect and the raise_dtr_rts method if it supports software + * management of these lines. Note that the dtr/rts raise is done each + * iteration as a hangup may have previously dropped them while we wait. + */ + +int tty_port_block_til_ready(struct tty_port *port, + struct tty_struct *tty, struct file *filp) +{ + int do_clocal = 0, retval; + unsigned long flags; + DECLARE_WAITQUEUE(wait, current); + int cd; + + /* block if port is in the process of being closed */ + if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&port->close_wait); + if (port->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; + } + + /* if non-blocking mode is set we can pass directly to open unless + the port has just hung up or is in another error state */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + port->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (C_CLOCAL(tty)) + do_clocal = 1; + + /* Block waiting until we can proceed. We may need to wait for the + carrier, but we must also wait for any close that is in progress + before the next open may complete */ + + retval = 0; + add_wait_queue(&port->open_wait, &wait); + + /* The port lock protects the port counts */ + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->count--; + port->blocked_open++; + spin_unlock_irqrestore(&port->lock, flags); + + while (1) { + /* Indicate we are open */ + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); + + set_current_state(TASK_INTERRUPTIBLE); + /* Check for a hangup or uninitialised port. Return accordingly */ + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { + if (port->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; + break; + } + /* Probe the carrier. For devices with no carrier detect this + will always return true */ + cd = tty_port_carrier_raised(port); + if (!(port->flags & ASYNC_CLOSING) && + (do_clocal || cd)) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + schedule(); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + + /* Update counts. A parallel hangup will have set count to zero and + we must not mess that up further */ + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->count++; + port->blocked_open--; + if (retval == 0) + port->flags |= ASYNC_NORMAL_ACTIVE; + spin_unlock_irqrestore(&port->lock, flags); + return 0; + +} +EXPORT_SYMBOL(tty_port_block_til_ready); + +int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct file *filp) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&port->lock, flags); + return 0; + } + + if( tty->count == 1 && port->count != 1) { + printk(KERN_WARNING + "tty_port_close_start: tty->count = 1 port count = %d.\n", + port->count); + port->count = 1; + } + if (--port->count < 0) { + printk(KERN_WARNING "tty_port_close_start: count = %d\n", + port->count); + port->count = 0; + } + + if (port->count) { + spin_unlock_irqrestore(&port->lock, flags); + return 0; + } + port->flags |= ASYNC_CLOSING; + tty->closing = 1; + spin_unlock_irqrestore(&port->lock, flags); + /* Don't block on a stalled port, just pull the chain */ + if (tty->flow_stopped) + tty_driver_flush_buffer(tty); + if (port->flags & ASYNC_INITIALIZED && + port->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, port->closing_wait); + return 1; +} +EXPORT_SYMBOL(tty_port_close_start); + +void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) +{ + unsigned long flags; + + tty_ldisc_flush(tty); + + spin_lock_irqsave(&port->lock, flags); + tty->closing = 0; + + if (port->blocked_open) { + spin_unlock_irqrestore(&port->lock, flags); + if (port->close_delay) { + msleep_interruptible( + jiffies_to_msecs(port->close_delay)); + } + spin_lock_irqsave(&port->lock, flags); + wake_up_interruptible(&port->open_wait); + } + port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + wake_up_interruptible(&port->close_wait); + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL(tty_port_close_end); diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c index 1718b3c481db..0e8234bd0e19 100644 --- a/drivers/char/vme_scc.c +++ b/drivers/char/vme_scc.c @@ -69,7 +69,7 @@ static void scc_disable_tx_interrupts(void * ptr); static void scc_enable_tx_interrupts(void * ptr); static void scc_disable_rx_interrupts(void * ptr); static void scc_enable_rx_interrupts(void * ptr); -static int scc_get_CD(void * ptr); +static int scc_carrier_raised(struct tty_port *port); static void scc_shutdown_port(void * ptr); static int scc_set_real_termios(void *ptr); static void scc_hungup(void *ptr); @@ -100,7 +100,6 @@ static struct real_driver scc_real_driver = { scc_enable_tx_interrupts, scc_disable_rx_interrupts, scc_enable_rx_interrupts, - scc_get_CD, scc_shutdown_port, scc_set_real_termios, scc_chars_in_buffer, @@ -129,6 +128,10 @@ static const struct tty_operations scc_ops = { .break_ctl = scc_break_ctl, }; +static const struct tty_port_operations scc_port_ops = { + .carrier_raised = scc_carrier_raised, +}; + /*---------------------------------------------------------------------------- * vme_scc_init() and support functions *---------------------------------------------------------------------------*/ @@ -176,6 +179,8 @@ static void scc_init_portstructs(void) for (i = 0; i < 2; i++) { port = scc_ports + i; + tty_port_init(&port->gs.port); + port->gs.port.ops = &scc_port_ops; port->gs.magic = SCC_MAGIC; port->gs.close_delay = HZ/2; port->gs.closing_wait = 30 * HZ; @@ -624,10 +629,10 @@ static void scc_enable_rx_interrupts(void *ptr) } -static int scc_get_CD(void *ptr) +static int scc_carrier_raised(struct tty_port *port) { - struct scc_port *port = ptr; - unsigned channel = port->channel; + struct scc_port *sc = container_of(port, struct scc_port, gs.port); + unsigned channel = sc->channel; return !!(scc_last_status_reg[channel] & SR_DCD); } @@ -638,7 +643,7 @@ static void scc_shutdown_port(void *ptr) struct scc_port *port = ptr; port->gs.port.flags &= ~ GS_ACTIVE; - if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) { + if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) { scc_setsignals (port, 0, 0); } } @@ -779,7 +784,7 @@ static void scc_setsignals(struct scc_port *port, int dtr, int rts) static void scc_send_xchar(struct tty_struct *tty, char ch) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; port->x_char = ch; if (ch) @@ -896,7 +901,7 @@ static int scc_open (struct tty_struct * tty, struct file * filp) return retval; } - port->c_dcd = scc_get_CD (port); + port->c_dcd = tty_port_carrier_raised(&port->gs.port); scc_enable_rx_interrupts(port); @@ -906,7 +911,7 @@ static int scc_open (struct tty_struct * tty, struct file * filp) static void scc_throttle (struct tty_struct * tty) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; unsigned long flags; SCC_ACCESS_INIT(port); @@ -922,7 +927,7 @@ static void scc_throttle (struct tty_struct * tty) static void scc_unthrottle (struct tty_struct * tty) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; unsigned long flags; SCC_ACCESS_INIT(port); @@ -945,7 +950,7 @@ static int scc_ioctl(struct tty_struct *tty, struct file *file, static int scc_break_ctl(struct tty_struct *tty, int break_state) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; unsigned long flags; SCC_ACCESS_INIT(port); diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 008176edbd64..80014213fb53 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -819,8 +819,8 @@ static inline int resize_screen(struct vc_data *vc, int width, int height, * ctrl_lock of the tty IFF a tty is passed. */ -static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, - struct vc_data *vc, unsigned int cols, unsigned int lines) +static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, + unsigned int cols, unsigned int lines) { unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0; unsigned int old_cols, old_rows, old_row_size, old_screen_size; @@ -932,7 +932,7 @@ static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, ws.ws_row = vc->vc_rows; ws.ws_col = vc->vc_cols; ws.ws_ypixel = vc->vc_scan_lines; - tty_do_resize(tty, real_tty, &ws); + tty_do_resize(tty, &ws); } if (CON_IS_VISIBLE(vc)) @@ -954,13 +954,12 @@ static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) { - return vc_do_resize(vc->vc_tty, vc->vc_tty, vc, cols, rows); + return vc_do_resize(vc->vc_tty, vc, cols, rows); } /** * vt_resize - resize a VT * @tty: tty to resize - * @real_tty: tty if a pty/tty pair * @ws: winsize attributes * * Resize a virtual terminal. This is called by the tty layer as we @@ -971,14 +970,13 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) * termios_mutex and the tty ctrl_lock in that order. */ -int vt_resize(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize *ws) +int vt_resize(struct tty_struct *tty, struct winsize *ws) { struct vc_data *vc = tty->driver_data; int ret; acquire_console_sem(); - ret = vc_do_resize(tty, real_tty, vc, ws->ws_col, ws->ws_row); + ret = vc_do_resize(tty, vc, ws->ws_col, ws->ws_row); release_console_sem(); return ret; } @@ -2679,7 +2677,7 @@ static int con_write_room(struct tty_struct *tty) { if (tty->stopped) return 0; - return 4096; /* No limit, really; we're not buffering */ + return 32768; /* No limit, really; we're not buffering */ } static int con_chars_in_buffer(struct tty_struct *tty) diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index 8944ce508e2f..a2dee0eb6dad 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -366,7 +366,7 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_ int vt_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - struct vc_data *vc = (struct vc_data *)tty->driver_data; + struct vc_data *vc = tty->driver_data; struct console_font_op op; /* used in multiple places here */ struct kbd_struct * kbd; unsigned int console; |