summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_parport/frpw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_parport/frpw.c')
-rw-r--r--drivers/ata/pata_parport/frpw.c313
1 files changed, 313 insertions, 0 deletions
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
new file mode 100644
index 000000000000..7bc8fa16d5d8
--- /dev/null
+++ b/drivers/ata/pata_parport/frpw.c
@@ -0,0 +1,313 @@
+/*
+ frpw.c (c) 1996-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License
+
+ frpw.c is a low-level protocol driver for the Freecom "Power"
+ parallel port IDE adapter.
+
+ Some applications of this adapter may require a "printer" reset
+ prior to loading the driver. This can be done by loading and
+ unloading the "lp" driver, or it can be done by this driver
+ if you define FRPW_HARD_RESET. The latter is not recommended
+ as it may upset devices on other ports.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.06 init_proto, release_proto
+ fix chip detect
+ added EPP-16 and EPP-32
+ 1.02 GRG 1998.09.23 added hard reset to initialisation process
+ 1.03 GRG 1998.12.14 made hard reset conditional
+
+*/
+
+#define FRPW_VERSION "1.03"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include <linux/pata_parport.h>
+
+#define cec4 w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4);
+#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0))
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+*/
+
+static int cont_map[2] = { 0x08, 0x10 };
+
+static int frpw_read_regr( PIA *pi, int cont, int regr )
+
+{ int h,l,r;
+
+ r = regr + cont_map[cont];
+
+ w2(4);
+ w0(r); cec4;
+ w2(6); l = r1();
+ w2(4); h = r1();
+ w2(4);
+
+ return j44(l,h);
+
+}
+
+static void frpw_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ int r;
+
+ r = regr + cont_map[cont];
+
+ w2(4); w0(r); cec4;
+ w0(val);
+ w2(5);w2(7);w2(5);w2(4);
+}
+
+static void frpw_read_block_int( PIA *pi, char * buf, int count, int regr )
+
+{ int h, l, k, ph;
+
+ switch(pi->mode) {
+
+ case 0: w2(4); w0(regr); cec4;
+ for (k=0;k<count;k++) {
+ w2(6); l = r1();
+ w2(4); h = r1();
+ buf[k] = j44(l,h);
+ }
+ w2(4);
+ break;
+
+ case 1: ph = 2;
+ w2(4); w0(regr + 0xc0); cec4;
+ w0(0xff);
+ for (k=0;k<count;k++) {
+ w2(0xa4 + ph);
+ buf[k] = r0();
+ ph = 2 - ph;
+ }
+ w2(0xac); w2(0xa4); w2(4);
+ break;
+
+ case 2: w2(4); w0(regr + 0x80); cec4;
+ for (k=0;k<count;k++) buf[k] = r4();
+ w2(0xac); w2(0xa4);
+ w2(4);
+ break;
+
+ case 3: w2(4); w0(regr + 0x80); cec4;
+ for (k=0;k<count-2;k++) buf[k] = r4();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 4: w2(4); w0(regr + 0x80); cec4;
+ for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 5: w2(4); w0(regr + 0x80); cec4;
+ for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
+ buf[count-4] = r4();
+ buf[count-3] = r4();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ }
+}
+
+static void frpw_read_block( PIA *pi, char * buf, int count)
+
+{ frpw_read_block_int(pi,buf,count,0x08);
+}
+
+static void frpw_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ switch(pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: w2(4); w0(8); cec4; w2(5);
+ for (k=0;k<count;k++) {
+ w0(buf[k]);
+ w2(7);w2(5);
+ }
+ w2(4);
+ break;
+
+ case 3: w2(4); w0(0xc8); cec4; w2(5);
+ for (k=0;k<count;k++) w4(buf[k]);
+ w2(4);
+ break;
+
+ case 4: w2(4); w0(0xc8); cec4; w2(5);
+ for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+ w2(4);
+ break;
+
+ case 5: w2(4); w0(0xc8); cec4; w2(5);
+ for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+ w2(4);
+ break;
+ }
+}
+
+static void frpw_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(4);
+}
+
+static void frpw_disconnect ( PIA *pi )
+
+{ w2(4); w0(0x20); cec4;
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+/* Stub logic to see if PNP string is available - used to distinguish
+ between the Xilinx and ASIC implementations of the Freecom adapter.
+*/
+
+static int frpw_test_pnp ( PIA *pi )
+
+/* returns chip_type: 0 = Xilinx, 1 = ASIC */
+
+{ int olddelay, a, b;
+
+#ifdef FRPW_HARD_RESET
+ w0(0); w2(8); udelay(50); w2(0xc); /* parallel bus reset */
+ mdelay(1500);
+#endif
+
+ olddelay = pi->delay;
+ pi->delay = 10;
+
+ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ w2(4); w0(4); w2(6); w2(7);
+ a = r1() & 0xff; w2(4); b = r1() & 0xff;
+ w2(0xc); w2(0xe); w2(4);
+
+ pi->delay = olddelay;
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+
+ return ((~a&0x40) && (b&0x40));
+}
+
+/* We use the pi->private to remember the result of the PNP test.
+ To make this work, private = port*2 + chip. Yes, I know it's
+ a hack :-(
+*/
+
+static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
+
+{ int j, k, r;
+ int e[2] = {0,0};
+
+ if ((pi->private>>1) != pi->port)
+ pi->private = frpw_test_pnp(pi) + 2*pi->port;
+
+ if (((pi->private%2) == 0) && (pi->mode > 2)) {
+ if (verbose)
+ printk("%s: frpw: Xilinx does not support mode %d\n",
+ pi->device, pi->mode);
+ return 1;
+ }
+
+ if (((pi->private%2) == 1) && (pi->mode == 2)) {
+ if (verbose)
+ printk("%s: frpw: ASIC does not support mode 2\n",
+ pi->device);
+ return 1;
+ }
+
+ frpw_connect(pi);
+ for (j=0;j<2;j++) {
+ frpw_write_regr(pi,0,6,0xa0+j*0x10);
+ for (k=0;k<256;k++) {
+ frpw_write_regr(pi,0,2,k^0xaa);
+ frpw_write_regr(pi,0,3,k^0x55);
+ if (frpw_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
+ }
+ }
+ frpw_disconnect(pi);
+
+ frpw_connect(pi);
+ frpw_read_block_int(pi,scratch,512,0x10);
+ r = 0;
+ for (k=0;k<128;k++) if (scratch[k] != k) r++;
+ frpw_disconnect(pi);
+
+ if (verbose) {
+ printk("%s: frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
+ pi->device,pi->port,(pi->private%2),pi->mode,e[0],e[1],r);
+ }
+
+ return (r || (e[0] && e[1]));
+}
+
+
+static void frpw_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[6] = {"4-bit","8-bit","EPP",
+ "EPP-8","EPP-16","EPP-32"};
+
+ printk("%s: frpw %s, Freecom (%s) adapter at 0x%x, ", pi->device,
+ FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol frpw = {
+ .owner = THIS_MODULE,
+ .name = "frpw",
+ .max_mode = 6,
+ .epp_first = 2,
+ .default_delay = 2,
+ .max_units = 1,
+ .write_regr = frpw_write_regr,
+ .read_regr = frpw_read_regr,
+ .write_block = frpw_write_block,
+ .read_block = frpw_read_block,
+ .connect = frpw_connect,
+ .disconnect = frpw_disconnect,
+ .test_proto = frpw_test_proto,
+ .log_adapter = frpw_log_adapter,
+};
+
+static int __init frpw_init(void)
+{
+ return paride_register(&frpw);
+}
+
+static void __exit frpw_exit(void)
+{
+ paride_unregister(&frpw);
+}
+
+MODULE_LICENSE("GPL");
+module_init(frpw_init)
+module_exit(frpw_exit)
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 17:15:20 +0000