summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-omap2/clkt_dpll.c14
-rw-r--r--arch/arm/mach-omap2/clock.c36
-rw-r--r--arch/arm/mach-omap2/clock.h18
-rw-r--r--arch/arm/mach-omap2/clock3xxx.c4
-rw-r--r--arch/arm/mach-omap2/dpll3xxx.c4
5 files changed, 28 insertions, 48 deletions
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index f251a14cbf16..82f0600c35f4 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -80,8 +80,8 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
} else {
- fint_min = ti_clk_features.fint_min;
- fint_max = ti_clk_features.fint_max;
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
}
if (!fint_min || !fint_max) {
@@ -89,18 +89,18 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
return DPLL_FINT_INVALID;
}
- if (fint < ti_clk_features.fint_min) {
+ if (fint < ti_clk_get_features()->fint_min) {
pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > ti_clk_features.fint_max) {
+ } else if (fint > ti_clk_get_features()->fint_max) {
pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
- } else if (fint > ti_clk_features.fint_band1_max &&
- fint < ti_clk_features.fint_band2_min) {
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
}
@@ -183,7 +183,7 @@ static int _omap2_dpll_is_in_bypass(u32 v)
{
u8 mask, val;
- mask = ti_clk_features.dpll_bypass_vals;
+ mask = ti_clk_get_features()->dpll_bypass_vals;
/*
* Each set bit in the mask corresponds to a bypass value equal
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index a699d7169307..cbc65b3a3b62 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -48,11 +48,6 @@
u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features ti_clk_features;
-
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
@@ -367,7 +362,7 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
- *idlest_val = ti_clk_features.cm_idlest_val;
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
}
/**
@@ -801,29 +796,30 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
*/
void __init ti_clk_init_features(void)
{
+ struct ti_clk_features features = { 0 };
/* Fint setup for DPLLs */
if (cpu_is_omap3430()) {
- ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
- ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
- ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
- ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+ features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+ features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
} else {
- ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
- ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
}
/* Bypass value setup for DPLLs */
if (cpu_is_omap24xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
} else if (cpu_is_omap34xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
soc_is_omap54xx() || soc_is_dra7xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
@@ -831,7 +827,7 @@ void __init ti_clk_init_features(void)
/* Jitter correction only available on OMAP343X */
if (cpu_is_omap343x())
- ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+ features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
/* Idlest value for interface clocks.
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
@@ -839,11 +835,13 @@ void __init ti_clk_init_features(void)
* AM35xx uses both, depending on the module.
*/
if (cpu_is_omap24xx())
- ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
else if (cpu_is_omap34xx())
- ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
if (omap_rev() == OMAP3430_REV_ES1_0)
- ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+ features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+
+ ti_clk_setup_features(&features);
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 652ed0ab86ec..ac21856d245d 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -225,24 +225,6 @@ void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
extern u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features {
- u32 flags;
- long fint_min;
- long fint_max;
- long fint_band1_max;
- long fint_band2_min;
- u8 dpll_bypass_vals;
- u8 cm_idlest_val;
-};
-
-#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
-#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1)
-
-extern struct ti_clk_features ti_clk_features;
-
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index a9e86db5daf9..8bede6aec44f 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -58,7 +58,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
* on 3430ES1 prevents us from changing DPLL multipliers or dividers
* on DPLL4.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
@@ -81,7 +81,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate, u8 index)
{
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 44e57ec225d4..9a80f593ed15 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -307,7 +307,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
* Set jitter correction. Jitter correction applicable for OMAP343X
* only since freqsel field is no longer present on other devices.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
@@ -559,7 +559,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
WARN_ON(!freqsel);
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 03:49:07 +0000