diff options
Diffstat (limited to 'arch')
369 files changed, 28888 insertions, 3699 deletions
diff --git a/arch/alpha/include/asm/8253pit.h b/arch/alpha/include/asm/8253pit.h new file mode 100644 index 000000000000..fef5c1450e47 --- /dev/null +++ b/arch/alpha/include/asm/8253pit.h @@ -0,0 +1,10 @@ +/* + * 8253/8254 Programmable Interval Timer + */ + +#ifndef _8253PIT_H +#define _8253PIT_H + +#define PIT_TICK_RATE 1193180UL + +#endif diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild new file mode 100644 index 000000000000..b7c8f188b313 --- /dev/null +++ b/arch/alpha/include/asm/Kbuild @@ -0,0 +1,11 @@ +include include/asm-generic/Kbuild.asm + +header-y += gentrap.h +header-y += regdef.h +header-y += pal.h +header-y += reg.h + +unifdef-y += console.h +unifdef-y += fpu.h +unifdef-y += sysinfo.h +unifdef-y += compiler.h diff --git a/arch/alpha/include/asm/a.out-core.h b/arch/alpha/include/asm/a.out-core.h new file mode 100644 index 000000000000..9e33e92e524c --- /dev/null +++ b/arch/alpha/include/asm/a.out-core.h @@ -0,0 +1,80 @@ +/* a.out coredump register dumper + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_A_OUT_CORE_H +#define _ASM_A_OUT_CORE_H + +#ifdef __KERNEL__ + +#include <linux/user.h> + +/* + * Fill in the user structure for an ECOFF core dump. + */ +static inline void aout_dump_thread(struct pt_regs *pt, struct user *dump) +{ + /* switch stack follows right below pt_regs: */ + struct switch_stack * sw = ((struct switch_stack *) pt) - 1; + + dump->magic = CMAGIC; + dump->start_code = current->mm->start_code; + dump->start_data = current->mm->start_data; + dump->start_stack = rdusp() & ~(PAGE_SIZE - 1); + dump->u_tsize = ((current->mm->end_code - dump->start_code) + >> PAGE_SHIFT); + dump->u_dsize = ((current->mm->brk + PAGE_SIZE-1 - dump->start_data) + >> PAGE_SHIFT); + dump->u_ssize = (current->mm->start_stack - dump->start_stack + + PAGE_SIZE-1) >> PAGE_SHIFT; + + /* + * We store the registers in an order/format that is + * compatible with DEC Unix/OSF/1 as this makes life easier + * for gdb. + */ + dump->regs[EF_V0] = pt->r0; + dump->regs[EF_T0] = pt->r1; + dump->regs[EF_T1] = pt->r2; + dump->regs[EF_T2] = pt->r3; + dump->regs[EF_T3] = pt->r4; + dump->regs[EF_T4] = pt->r5; + dump->regs[EF_T5] = pt->r6; + dump->regs[EF_T6] = pt->r7; + dump->regs[EF_T7] = pt->r8; + dump->regs[EF_S0] = sw->r9; + dump->regs[EF_S1] = sw->r10; + dump->regs[EF_S2] = sw->r11; + dump->regs[EF_S3] = sw->r12; + dump->regs[EF_S4] = sw->r13; + dump->regs[EF_S5] = sw->r14; + dump->regs[EF_S6] = sw->r15; + dump->regs[EF_A3] = pt->r19; + dump->regs[EF_A4] = pt->r20; + dump->regs[EF_A5] = pt->r21; + dump->regs[EF_T8] = pt->r22; + dump->regs[EF_T9] = pt->r23; + dump->regs[EF_T10] = pt->r24; + dump->regs[EF_T11] = pt->r25; + dump->regs[EF_RA] = pt->r26; + dump->regs[EF_T12] = pt->r27; + dump->regs[EF_AT] = pt->r28; + dump->regs[EF_SP] = rdusp(); + dump->regs[EF_PS] = pt->ps; + dump->regs[EF_PC] = pt->pc; + dump->regs[EF_GP] = pt->gp; + dump->regs[EF_A0] = pt->r16; + dump->regs[EF_A1] = pt->r17; + dump->regs[EF_A2] = pt->r18; + memcpy((char *)dump->regs + EF_SIZE, sw->fp, 32 * 8); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_A_OUT_CORE_H */ diff --git a/arch/alpha/include/asm/a.out.h b/arch/alpha/include/asm/a.out.h new file mode 100644 index 000000000000..02ce8473870a --- /dev/null +++ b/arch/alpha/include/asm/a.out.h @@ -0,0 +1,102 @@ +#ifndef __ALPHA_A_OUT_H__ +#define __ALPHA_A_OUT_H__ + +#include <linux/types.h> + +/* + * OSF/1 ECOFF header structs. ECOFF files consist of: + * - a file header (struct filehdr), + * - an a.out header (struct aouthdr), + * - one or more section headers (struct scnhdr). + * The filhdr's "f_nscns" field contains the + * number of section headers. + */ + +struct filehdr +{ + /* OSF/1 "file" header */ + __u16 f_magic, f_nscns; + __u32 f_timdat; + __u64 f_symptr; + __u32 f_nsyms; + __u16 f_opthdr, f_flags; +}; + +struct aouthdr +{ + __u64 info; /* after that it looks quite normal.. */ + __u64 tsize; + __u64 dsize; + __u64 bsize; + __u64 entry; + __u64 text_start; /* with a few additions that actually make sense */ + __u64 data_start; + __u64 bss_start; + __u32 gprmask, fprmask; /* bitmask of general & floating point regs used in binary */ + __u64 gpvalue; +}; + +struct scnhdr +{ + char s_name[8]; + __u64 s_paddr; + __u64 s_vaddr; + __u64 s_size; + __u64 s_scnptr; + __u64 s_relptr; + __u64 s_lnnoptr; + __u16 s_nreloc; + __u16 s_nlnno; + __u32 s_flags; +}; + +struct exec +{ + /* OSF/1 "file" header */ + struct filehdr fh; + struct aouthdr ah; +}; + +/* + * Define's so that the kernel exec code can access the a.out header + * fields... + */ +#define a_info ah.info +#define a_text ah.tsize +#define a_data ah.dsize +#define a_bss ah.bsize +#define a_entry ah.entry +#define a_textstart ah.text_start +#define a_datastart ah.data_start +#define a_bssstart ah.bss_start +#define a_gprmask ah.gprmask +#define a_fprmask ah.fprmask +#define a_gpvalue ah.gpvalue + +#define N_TXTADDR(x) ((x).a_textstart) +#define N_DATADDR(x) ((x).a_datastart) +#define N_BSSADDR(x) ((x).a_bssstart) +#define N_DRSIZE(x) 0 +#define N_TRSIZE(x) 0 +#define N_SYMSIZE(x) 0 + +#define AOUTHSZ sizeof(struct aouthdr) +#define SCNHSZ sizeof(struct scnhdr) +#define SCNROUND 16 + +#define N_TXTOFF(x) \ + ((long) N_MAGIC(x) == ZMAGIC ? 0 : \ + (sizeof(struct exec) + (x).fh.f_nscns*SCNHSZ + SCNROUND - 1) & ~(SCNROUND - 1)) + +#ifdef __KERNEL__ + +/* Assume that start addresses below 4G belong to a TASO application. + Unfortunately, there is no proper bit in the exec header to check. + Worse, we have to notice the start address before swapping to use + /sbin/loader, which of course is _not_ a TASO application. */ +#define SET_AOUT_PERSONALITY(BFPM, EX) \ + set_personality (((BFPM->sh_bang || EX.ah.entry < 0x100000000L \ + ? ADDR_LIMIT_32BIT : 0) | PER_OSF4)) + +#endif /* __KERNEL__ */ +#endif /* __A_OUT_GNU_H__ */ diff --git a/arch/alpha/include/asm/agp.h b/arch/alpha/include/asm/agp.h new file mode 100644 index 000000000000..26c179135293 --- /dev/null +++ b/arch/alpha/include/asm/agp.h @@ -0,0 +1,22 @@ +#ifndef AGP_H +#define AGP_H 1 + +#include <asm/io.h> + +/* dummy for now */ + +#define map_page_into_agp(page) +#define unmap_page_from_agp(page) +#define flush_agp_cache() mb() + +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + +#endif diff --git a/arch/alpha/include/asm/agp_backend.h b/arch/alpha/include/asm/agp_backend.h new file mode 100644 index 000000000000..55dd44a2cea7 --- /dev/null +++ b/arch/alpha/include/asm/agp_backend.h @@ -0,0 +1,42 @@ +#ifndef _ALPHA_AGP_BACKEND_H +#define _ALPHA_AGP_BACKEND_H 1 + +typedef union _alpha_agp_mode { + struct { + u32 rate : 3; + u32 reserved0 : 1; + u32 fw : 1; + u32 fourgb : 1; + u32 reserved1 : 2; + u32 enable : 1; + u32 sba : 1; + u32 reserved2 : 14; + u32 rq : 8; + } bits; + u32 lw; +} alpha_agp_mode; + +typedef struct _alpha_agp_info { + struct pci_controller *hose; + struct { + dma_addr_t bus_base; + unsigned long size; + void *sysdata; + } aperture; + alpha_agp_mode capability; + alpha_agp_mode mode; + void *private; + struct alpha_agp_ops *ops; +} alpha_agp_info; + +struct alpha_agp_ops { + int (*setup)(alpha_agp_info *); + void (*cleanup)(alpha_agp_info *); + int (*configure)(alpha_agp_info *); + int (*bind)(alpha_agp_info *, off_t, struct agp_memory *); + int (*unbind)(alpha_agp_info *, off_t, struct agp_memory *); + unsigned long (*translate)(alpha_agp_info *, dma_addr_t); +}; + + +#endif /* _ALPHA_AGP_BACKEND_H */ diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h new file mode 100644 index 000000000000..ca88e54dec93 --- /dev/null +++ b/arch/alpha/include/asm/atomic.h @@ -0,0 +1,267 @@ +#ifndef _ALPHA_ATOMIC_H +#define _ALPHA_ATOMIC_H + +#include <asm/barrier.h> +#include <asm/system.h> + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc... + * + * But use these as seldom as possible since they are much slower + * than regular operations. + */ + + +/* + * Counter is volatile to make sure gcc doesn't try to be clever + * and move things around on us. We need to use _exactly_ the address + * the user gave us, not some alias that contains the same information. + */ +typedef struct { volatile int counter; } atomic_t; +typedef struct { volatile long counter; } atomic64_t; + +#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) +#define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } ) + +#define atomic_read(v) ((v)->counter + 0) +#define atomic64_read(v) ((v)->counter + 0) + +#define atomic_set(v,i) ((v)->counter = (i)) +#define atomic64_set(v,i) ((v)->counter = (i)) + +/* + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + */ + +static __inline__ void atomic_add(int i, atomic_t * v) +{ + unsigned long temp; + __asm__ __volatile__( + "1: ldl_l %0,%1\n" + " addl %0,%2,%0\n" + " stl_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (v->counter) + :"Ir" (i), "m" (v->counter)); +} + +static __inline__ void atomic64_add(long i, atomic64_t * v) +{ + unsigned long temp; + __asm__ __volatile__( + "1: ldq_l %0,%1\n" + " addq %0,%2,%0\n" + " stq_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (v->counter) + :"Ir" (i), "m" (v->counter)); +} + +static __inline__ void atomic_sub(int i, atomic_t * v) +{ + unsigned long temp; + __asm__ __volatile__( + "1: ldl_l %0,%1\n" + " subl %0,%2,%0\n" + " stl_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (v->counter) + :"Ir" (i), "m" (v->counter)); +} + +static __inline__ void atomic64_sub(long i, atomic64_t * v) +{ + unsigned long temp; + __asm__ __volatile__( + "1: ldq_l %0,%1\n" + " subq %0,%2,%0\n" + " stq_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (v->counter) + :"Ir" (i), "m" (v->counter)); +} + + +/* + * Same as above, but return the result value + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + long temp, result; + smp_mb(); + __asm__ __volatile__( + "1: ldl_l %0,%1\n" + " addl %0,%3,%2\n" + " addl %0,%3,%0\n" + " stl_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (v->counter), "=&r" (result) + :"Ir" (i), "m" (v->counter) : "memory"); + smp_mb(); + return result; +} + +static __inline__ long atomic64_add_return(long i, atomic64_t * v) +{ + long temp, result; + smp_mb(); + __asm__ __volatile__( + "1: ldq_l %0,%1\n" + " addq %0,%3,%2\n" + " addq %0,%3,%0\n" + " stq_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (v->counter), "=&r" (result) + :"Ir" (i), "m" (v->counter) : "memory"); + smp_mb(); + return result; +} + +static __inline__ long atomic_sub_return(int i, atomic_t * v) +{ + long temp, result; + smp_mb(); + __asm__ __volatile__( + "1: ldl_l %0,%1\n" + " subl %0,%3,%2\n" + " subl %0,%3,%0\n" + " stl_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (v->counter), "=&r" (result) + :"Ir" (i), "m" (v->counter) : "memory"); + smp_mb(); + return result; +} + +static __inline__ long atomic64_sub_return(long i, atomic64_t * v) +{ + long temp, result; + smp_mb(); + __asm__ __volatile__( + "1: ldq_l %0,%1\n" + " subq %0,%3,%2\n" + " subq %0,%3,%0\n" + " stq_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (v->counter), "=&r" (result) + :"Ir" (i), "m" (v->counter) : "memory"); + smp_mb(); + return result; +} + +#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) +#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) + +#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +/** + * atomic64_add_unless - add unless the number is a given value + * @v: pointer of type atomic64_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) +{ + long c, old; + c = atomic64_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic64_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) +#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0) + +#define atomic_dec_return(v) atomic_sub_return(1,(v)) +#define atomic64_dec_return(v) atomic64_sub_return(1,(v)) + +#define atomic_inc_return(v) atomic_add_return(1,(v)) +#define atomic64_inc_return(v) atomic64_add_return(1,(v)) + +#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) +#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0) + +#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) +#define atomic64_inc_and_test(v) (atomic64_add_return(1, (v)) == 0) + +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) +#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0) + +#define atomic_inc(v) atomic_add(1,(v)) +#define atomic64_inc(v) atomic64_add(1,(v)) + +#define atomic_dec(v) atomic_sub(1,(v)) +#define atomic64_dec(v) atomic64_sub(1,(v)) + +#define smp_mb__before_atomic_dec() smp_mb() +#define smp_mb__after_atomic_dec() smp_mb() +#define smp_mb__before_atomic_inc() smp_mb() +#define smp_mb__after_atomic_inc() smp_mb() + +#include <asm-generic/atomic.h> +#endif /* _ALPHA_ATOMIC_H */ diff --git a/arch/alpha/include/asm/auxvec.h b/arch/alpha/include/asm/auxvec.h new file mode 100644 index 000000000000..e96fe880e310 --- /dev/null +++ b/arch/alpha/include/asm/auxvec.h @@ -0,0 +1,24 @@ +#ifndef __ASM_ALPHA_AUXVEC_H +#define __ASM_ALPHA_AUXVEC_H + +/* Reserve these numbers for any future use of a VDSO. */ +#if 0 +#define AT_SYSINFO 32 +#define AT_SYSINFO_EHDR 33 +#endif + +/* More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the + value is -1, then the cache doesn't exist. Otherwise: + + bit 0-3: Cache set-associativity; 0 means fully associative. + bit 4-7: Log2 of cacheline size. + bit 8-31: Size of the entire cache >> 8. + bit 32-63: Reserved. +*/ + +#define AT_L1I_CACHESHAPE 34 +#define AT_L1D_CACHESHAPE 35 +#define AT_L2_CACHESHAPE 36 +#define AT_L3_CACHESHAPE 37 + +#endif /* __ASM_ALPHA_AUXVEC_H */ diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h new file mode 100644 index 000000000000..ac78eba909bc --- /dev/null +++ b/arch/alpha/include/asm/barrier.h @@ -0,0 +1,33 @@ +#ifndef __BARRIER_H +#define __BARRIER_H + +#include <asm/compiler.h> + +#define mb() \ +__asm__ __volatile__("mb": : :"memory") + +#define rmb() \ +__asm__ __volatile__("mb": : :"memory") + +#define wmb() \ +__asm__ __volatile__("wmb": : :"memory") + +#define read_barrier_depends() \ +__asm__ __volatile__("mb": : :"memory") + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while (0) +#endif + +#define set_mb(var, value) \ +do { var = value; mb(); } while (0) + +#endif /* __BARRIER_H */ diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h new file mode 100644 index 000000000000..15f3ae25c511 --- /dev/null +++ b/arch/alpha/include/asm/bitops.h @@ -0,0 +1,466 @@ +#ifndef _ALPHA_BITOPS_H +#define _ALPHA_BITOPS_H + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +#include <asm/compiler.h> +#include <asm/barrier.h> + +/* + * Copyright 1994, Linus Torvalds. + */ + +/* + * These have to be done with inline assembly: that way the bit-setting + * is guaranteed to be atomic. All bit operations return 0 if the bit + * was cleared before the operation and != 0 if it was not. + * + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + * + * bit 0 is the LSB of addr; bit 64 is the LSB of (addr+1). + */ + +static inline void +set_bit(unsigned long nr, volatile void * addr) +{ + unsigned long temp; + int *m = ((int *) addr) + (nr >> 5); + + __asm__ __volatile__( + "1: ldl_l %0,%3\n" + " bis %0,%2,%0\n" + " stl_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (*m) + :"Ir" (1UL << (nr & 31)), "m" (*m)); +} + +/* + * WARNING: non atomic version. + */ +static inline void +__set_bit(unsigned long nr, volatile void * addr) +{ + int *m = ((int *) addr) + (nr >> 5); + + *m |= 1 << (nr & 31); +} + +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() + +static inline void +clear_bit(unsigned long nr, volatile void * addr) +{ + unsigned long temp; + int *m = ((int *) addr) + (nr >> 5); + + __asm__ __volatile__( + "1: ldl_l %0,%3\n" + " bic %0,%2,%0\n" + " stl_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (*m) + :"Ir" (1UL << (nr & 31)), "m" (*m)); +} + +static inline void +clear_bit_unlock(unsigned long nr, volatile void * addr) +{ + smp_mb(); + clear_bit(nr, addr); +} + +/* + * WARNING: non atomic version. + */ +static __inline__ void +__clear_bit(unsigned long nr, volatile void * addr) +{ + int *m = ((int *) addr) + (nr >> 5); + + *m &= ~(1 << (nr & 31)); +} + +static inline void +__clear_bit_unlock(unsigned long nr, volatile void * addr) +{ + smp_mb(); + __clear_bit(nr, addr); +} + +static inline void +change_bit(unsigned long nr, volatile void * addr) +{ + unsigned long temp; + int *m = ((int *) addr) + (nr >> 5); + + __asm__ __volatile__( + "1: ldl_l %0,%3\n" + " xor %0,%2,%0\n" + " stl_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (*m) + :"Ir" (1UL << (nr & 31)), "m" (*m)); +} + +/* + * WARNING: non atomic version. + */ +static __inline__ void +__change_bit(unsigned long nr, volatile void * addr) +{ + int *m = ((int *) addr) + (nr >> 5); + + *m ^= 1 << (nr & 31); +} + +static inline int +test_and_set_bit(unsigned long nr, volatile void *addr) +{ + unsigned long oldbit; + unsigned long temp; + int *m = ((int *) addr) + (nr >> 5); + + __asm__ __volatile__( +#ifdef CONFIG_SMP + " mb\n" +#endif + "1: ldl_l %0,%4\n" + " and %0,%3,%2\n" + " bne %2,2f\n" + " xor %0,%3,%0\n" + " stl_c %0,%1\n" + " beq %0,3f\n" + "2:\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + ".subsection 2\n" + "3: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (*m), "=&r" (oldbit) + :"Ir" (1UL << (nr & 31)), "m" (*m) : "memory"); + + return oldbit != 0; +} + +static inline int +test_and_set_bit_lock(unsigned long nr, volatile void *addr) +{ + unsigned long oldbit; + unsigned long temp; + int *m = ((int *) addr) + (nr >> 5); + + __asm__ __volatile__( + "1: ldl_l %0,%4\n" + " and %0,%3,%2\n" + " bne %2,2f\n" + " xor %0,%3,%0\n" + " stl_c %0,%1\n" + " beq %0,3f\n" + "2:\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + ".subsection 2\n" + "3: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (*m), "=&r" (oldbit) + :"Ir" (1UL << (nr & 31)), "m" (*m) : "memory"); + + return oldbit != 0; +} + +/* + * WARNING: non atomic version. + */ +static inline int +__test_and_set_bit(unsigned long nr, volatile void * addr) +{ + unsigned long mask = 1 << (nr & 0x1f); + int *m = ((int *) addr) + (nr >> 5); + int old = *m; + + *m = old | mask; + return (old & mask) != 0; +} + +static inline int +test_and_clear_bit(unsigned long nr, volatile void * addr) +{ + unsigned long oldbit; + unsigned long temp; + int *m = ((int *) addr) + (nr >> 5); + + __asm__ __volatile__( +#ifdef CONFIG_SMP + " mb\n" +#endif + "1: ldl_l %0,%4\n" + " and %0,%3,%2\n" + " beq %2,2f\n" + " xor %0,%3,%0\n" + " stl_c %0,%1\n" + " beq %0,3f\n" + "2:\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + ".subsection 2\n" + "3: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (*m), "=&r" (oldbit) + :"Ir" (1UL << (nr & 31)), "m" (*m) : "memory"); + + return oldbit != 0; +} + +/* + * WARNING: non atomic version. + */ +static inline int +__test_and_clear_bit(unsigned long nr, volatile void * addr) +{ + unsigned long mask = 1 << (nr & 0x1f); + int *m = ((int *) addr) + (nr >> 5); + int old = *m; + + *m = old & ~mask; + return (old & mask) != 0; +} + +static inline int +test_and_change_bit(unsigned long nr, volatile void * addr) +{ + unsigned long oldbit; + unsigned long temp; + int *m = ((int *) addr) + (nr >> 5); + + __asm__ __volatile__( +#ifdef CONFIG_SMP + " mb\n" +#endif + "1: ldl_l %0,%4\n" + " and %0,%3,%2\n" + " xor %0,%3,%0\n" + " stl_c %0,%1\n" + " beq %0,3f\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + ".subsection 2\n" + "3: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (*m), "=&r" (oldbit) + :"Ir" (1UL << (nr & 31)), "m" (*m) : "memory"); + + return oldbit != 0; +} + +/* + * WARNING: non atomic version. + */ +static __inline__ int +__test_and_change_bit(unsigned long nr, volatile void * addr) +{ + unsigned long mask = 1 << (nr & 0x1f); + int *m = ((int *) addr) + (nr >> 5); + int old = *m; + + *m = old ^ mask; + return (old & mask) != 0; +} + +static inline int +test_bit(int nr, const volatile void * addr) +{ + return (1UL & (((const int *) addr)[nr >> 5] >> (nr & 31))) != 0UL; +} + +/* + * ffz = Find First Zero in word. Undefined if no zero exists, + * so code should check against ~0UL first.. + * + * Do a binary search on the bits. Due to the nature of large + * constants on the alpha, it is worthwhile to split the search. + */ +static inline unsigned long ffz_b(unsigned long x) +{ + unsigned long sum, x1, x2, x4; + + x = ~x & -~x; /* set first 0 bit, clear others */ + x1 = x & 0xAA; + x2 = x & 0xCC; + x4 = x & 0xF0; + sum = x2 ? 2 : 0; + sum += (x4 != 0) * 4; + sum += (x1 != 0); + + return sum; +} + +static inline unsigned long ffz(unsigned long word) +{ +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) + /* Whee. EV67 can calculate it directly. */ + return __kernel_cttz(~word); +#else + unsigned long bits, qofs, bofs; + + bits = __kernel_cmpbge(word, ~0UL); + qofs = ffz_b(bits); + bits = __kernel_extbl(word, qofs); + bofs = ffz_b(bits); + + return qofs*8 + bofs; +#endif +} + +/* + * __ffs = Find First set bit in word. Undefined if no set bit exists. + */ +static inline unsigned long __ffs(unsigned long word) +{ +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) + /* Whee. EV67 can calculate it directly. */ + return __kernel_cttz(word); +#else + unsigned long bits, qofs, bofs; + + bits = __kernel_cmpbge(0, word); + qofs = ffz_b(bits); + bits = __kernel_extbl(word, qofs); + bofs = ffz_b(~bits); + + return qofs*8 + bofs; +#endif +} + +#ifdef __KERNEL__ + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above __ffs. + */ + +static inline int ffs(int word) +{ + int result = __ffs(word) + 1; + return word ? result : 0; +} + +/* + * fls: find last bit set. + */ +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) +static inline int fls64(unsigned long word) +{ + return 64 - __kernel_ctlz(word); +} +#else +extern const unsigned char __flsm1_tab[256]; + +static inline int fls64(unsigned long x) +{ + unsigned long t, a, r; + + t = __kernel_cmpbge (x, 0x0101010101010101UL); + a = __flsm1_tab[t]; + t = __kernel_extbl (x, a); + r = a*8 + __flsm1_tab[t] + (x != 0); + + return r; +} +#endif + +static inline unsigned long __fls(unsigned long x) +{ + return fls64(x) - 1; +} + +static inline int fls(int x) +{ + return fls64((unsigned int) x); +} + +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ + +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) +/* Whee. EV67 can calculate it directly. */ +static inline unsigned long hweight64(unsigned long w) +{ + return __kernel_ctpop(w); +} + +static inline unsigned int hweight32(unsigned int w) +{ + return hweight64(w); +} + +static inline unsigned int hweight16(unsigned int w) +{ + return hweight64(w & 0xffff); +} + +static inline unsigned int hweight8(unsigned int w) +{ + return hweight64(w & 0xff); +} +#else +#include <asm-generic/bitops/hweight.h> +#endif + +#endif /* __KERNEL__ */ + +#include <asm-generic/bitops/find.h> + +#ifdef __KERNEL__ + +/* + * Every architecture must define this function. It's the fastest + * way of searching a 140-bit bitmap where the first 100 bits are + * unlikely to be set. It's guaranteed that at least one of the 140 + * bits is set. + */ +static inline unsigned long +sched_find_first_bit(unsigned long b[3]) +{ + unsigned long b0 = b[0], b1 = b[1], b2 = b[2]; + unsigned long ofs; + + ofs = (b1 ? 64 : 128); + b1 = (b1 ? b1 : b2); + ofs = (b0 ? 0 : ofs); + b0 = (b0 ? b0 : b1); + + return __ffs(b0) + ofs; +} + +#include <asm-generic/bitops/ext2-non-atomic.h> + +#define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a) +#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a) + +#include <asm-generic/bitops/minix.h> + +#endif /* __KERNEL__ */ + +#endif /* _ALPHA_BITOPS_H */ diff --git a/arch/alpha/include/asm/bug.h b/arch/alpha/include/asm/bug.h new file mode 100644 index 000000000000..695a5ee4b5d3 --- /dev/null +++ b/arch/alpha/include/asm/bug.h @@ -0,0 +1,28 @@ +#ifndef _ALPHA_BUG_H +#define _ALPHA_BUG_H + +#include <linux/linkage.h> + +#ifdef CONFIG_BUG +#include <asm/pal.h> + +/* ??? Would be nice to use .gprel32 here, but we can't be sure that the + function loaded the GP, so this could fail in modules. */ +static inline void ATTRIB_NORET __BUG(const char *file, int line) +{ + __asm__ __volatile__( + "call_pal %0 # bugchk\n\t" + ".long %1\n\t.8byte %2" + : : "i" (PAL_bugchk), "i"(line), "i"(file)); + for ( ; ; ) + ; +} + +#define BUG() __BUG(__FILE__, __LINE__) + +#define HAVE_ARCH_BUG +#endif + +#include <asm-generic/bug.h> + +#endif diff --git a/arch/alpha/include/asm/bugs.h b/arch/alpha/include/asm/bugs.h new file mode 100644 index 000000000000..78030d1c7e7e --- /dev/null +++ b/arch/alpha/include/asm/bugs.h @@ -0,0 +1,20 @@ +/* + * include/asm-alpha/bugs.h + * + * Copyright (C) 1994 Linus Torvalds + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +/* + * I don't know of any alpha bugs yet.. Nice chip + */ + +static void check_bugs(void) +{ +} diff --git a/arch/alpha/include/asm/byteorder.h b/arch/alpha/include/asm/byteorder.h new file mode 100644 index 000000000000..58e958fc7f1b --- /dev/null +++ b/arch/alpha/include/asm/byteorder.h @@ -0,0 +1,47 @@ +#ifndef _ALPHA_BYTEORDER_H +#define _ALPHA_BYTEORDER_H + +#include <asm/types.h> +#include <linux/compiler.h> +#include <asm/compiler.h> + +#ifdef __GNUC__ + +static inline __attribute_const__ __u32 __arch__swab32(__u32 x) +{ + /* + * Unfortunately, we can't use the 6 instruction sequence + * on ev6 since the latency of the UNPKBW is 3, which is + * pretty hard to hide. Just in case a future implementation + * has a lower latency, here's the sequence (also by Mike Burrows) + * + * UNPKBW a0, v0 v0: 00AA00BB00CC00DD + * SLL v0, 24, a0 a0: BB00CC00DD000000 + * BIS v0, a0, a0 a0: BBAACCBBDDCC00DD + * EXTWL a0, 6, v0 v0: 000000000000BBAA + * ZAP a0, 0xf3, a0 a0: 00000000DDCC0000 + * ADDL a0, v0, v0 v0: ssssssssDDCCBBAA + */ + + __u64 t0, t1, t2, t3; + + t0 = __kernel_inslh(x, 7); /* t0 : 0000000000AABBCC */ + t1 = __kernel_inswl(x, 3); /* t1 : 000000CCDD000000 */ + t1 |= t0; /* t1 : 000000CCDDAABBCC */ + t2 = t1 >> 16; /* t2 : 0000000000CCDDAA */ + t0 = t1 & 0xFF00FF00; /* t0 : 00000000DD00BB00 */ + t3 = t2 & 0x00FF00FF; /* t3 : 0000000000CC00AA */ + t1 = t0 + t3; /* t1 : ssssssssDDCCBBAA */ + + return t1; +} + +#define __arch__swab32 __arch__swab32 + +#endif /* __GNUC__ */ + +#define __BYTEORDER_HAS_U64__ + +#include <linux/byteorder/little_endian.h> + +#endif /* _ALPHA_BYTEORDER_H */ diff --git a/arch/alpha/include/asm/cache.h b/arch/alpha/include/asm/cache.h new file mode 100644 index 000000000000..f199e69a5d0b --- /dev/null +++ b/arch/alpha/include/asm/cache.h @@ -0,0 +1,23 @@ +/* + * include/asm-alpha/cache.h + */ +#ifndef __ARCH_ALPHA_CACHE_H +#define __ARCH_ALPHA_CACHE_H + + +/* Bytes per L1 (data) cache line. */ +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EV6) +# define L1_CACHE_BYTES 64 +# define L1_CACHE_SHIFT 6 +#else +/* Both EV4 and EV5 are write-through, read-allocate, + direct-mapped, physical. +*/ +# define L1_CACHE_BYTES 32 +# define L1_CACHE_SHIFT 5 +#endif + +#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)) +#define SMP_CACHE_BYTES L1_CACHE_BYTES + +#endif diff --git a/arch/alpha/include/asm/cacheflush.h b/arch/alpha/include/asm/cacheflush.h new file mode 100644 index 000000000000..b686cc7fc44e --- /dev/null +++ b/arch/alpha/include/asm/cacheflush.h @@ -0,0 +1,74 @@ +#ifndef _ALPHA_CACHEFLUSH_H +#define _ALPHA_CACHEFLUSH_H + +#include <linux/mm.h> + +/* Caches aren't brain-dead on the Alpha. */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +/* Note that the following two definitions are _highly_ dependent + on the contexts in which they are used in the kernel. I personally + think it is criminal how loosely defined these macros are. */ + +/* We need to flush the kernel's icache after loading modules. The + only other use of this macro is in load_aout_interp which is not + used on Alpha. + + Note that this definition should *not* be used for userspace + icache flushing. While functional, it is _way_ overkill. The + icache is tagged with ASNs and it suffices to allocate a new ASN + for the process. */ +#ifndef CONFIG_SMP +#define flush_icache_range(start, end) imb() +#else +#define flush_icache_range(start, end) smp_imb() +extern void smp_imb(void); +#endif + +/* We need to flush the userspace icache after setting breakpoints in + ptrace. + + Instead of indiscriminately using imb, take advantage of the fact + that icache entries are tagged with the ASN and load a new mm context. */ +/* ??? Ought to use this in arch/alpha/kernel/signal.c too. */ + +#ifndef CONFIG_SMP +extern void __load_new_mm_context(struct mm_struct *); +static inline void +flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len) +{ + if (vma->vm_flags & VM_EXEC) { + struct mm_struct *mm = vma->vm_mm; + if (current->active_mm == mm) + __load_new_mm_context(mm); + else + mm->context[smp_processor_id()] = 0; + } +} +#else +extern void flush_icache_user_range(struct vm_area_struct *vma, + struct page *page, unsigned long addr, int len); +#endif + +/* This is used only in do_no_page and do_swap_page. */ +#define flush_icache_page(vma, page) \ + flush_icache_user_range((vma), (page), 0, 0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { memcpy(dst, src, len); \ + flush_icache_user_range(vma, page, vaddr, len); \ +} while (0) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +#endif /* _ALPHA_CACHEFLUSH_H */ diff --git a/arch/alpha/include/asm/checksum.h b/arch/alpha/include/asm/checksum.h new file mode 100644 index 000000000000..d3854bbf0a9e --- /dev/null +++ b/arch/alpha/include/asm/checksum.h @@ -0,0 +1,75 @@ +#ifndef _ALPHA_CHECKSUM_H +#define _ALPHA_CHECKSUM_H + +#include <linux/in6.h> + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum); + +__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, unsigned short proto, + __wsum sum); + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +extern __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *errp); + +__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum); + + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +extern __sum16 ip_compute_csum(const void *buff, int len); + +/* + * Fold a partial checksum without adding pseudo headers + */ + +static inline __sum16 csum_fold(__wsum csum) +{ + u32 sum = (__force u32)csum; + sum = (sum & 0xffff) + (sum >> 16); + sum = (sum & 0xffff) + (sum >> 16); + return (__force __sum16)~sum; +} + +#define _HAVE_ARCH_IPV6_CSUM +extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum); +#endif diff --git a/arch/alpha/include/asm/compiler.h b/arch/alpha/include/asm/compiler.h new file mode 100644 index 000000000000..da6bb199839c --- /dev/null +++ b/arch/alpha/include/asm/compiler.h @@ -0,0 +1,130 @@ +#ifndef __ALPHA_COMPILER_H +#define __ALPHA_COMPILER_H + +/* + * Herein are macros we use when describing various patterns we want to GCC. + * In all cases we can get better schedules out of the compiler if we hide + * as little as possible inside inline assembly. However, we want to be + * able to know what we'll get out before giving up inline assembly. Thus + * these tests and macros. + */ + +#if __GNUC__ == 3 && __GNUC_MINOR__ >= 4 || __GNUC__ > 3 +# define __kernel_insbl(val, shift) __builtin_alpha_insbl(val, shift) +# define __kernel_inswl(val, shift) __builtin_alpha_inswl(val, shift) +# define __kernel_insql(val, shift) __builtin_alpha_insql(val, shift) +# define __kernel_inslh(val, shift) __builtin_alpha_inslh(val, shift) +# define __kernel_extbl(val, shift) __builtin_alpha_extbl(val, shift) +# define __kernel_extwl(val, shift) __builtin_alpha_extwl(val, shift) +# define __kernel_cmpbge(a, b) __builtin_alpha_cmpbge(a, b) +#else +# define __kernel_insbl(val, shift) \ + ({ unsigned long __kir; \ + __asm__("insbl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val)); \ + __kir; }) +# define __kernel_inswl(val, shift) \ + ({ unsigned long __kir; \ + __asm__("inswl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val)); \ + __kir; }) +# define __kernel_insql(val, shift) \ + ({ unsigned long __kir; \ + __asm__("insql %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val)); \ + __kir; }) +# define __kernel_inslh(val, shift) \ + ({ unsigned long __kir; \ + __asm__("inslh %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val)); \ + __kir; }) +# define __kernel_extbl(val, shift) \ + ({ unsigned long __kir; \ + __asm__("extbl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val)); \ + __kir; }) +# define __kernel_extwl(val, shift) \ + ({ unsigned long __kir; \ + __asm__("extwl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val)); \ + __kir; }) +# define __kernel_cmpbge(a, b) \ + ({ unsigned long __kir; \ + __asm__("cmpbge %r2,%1,%0" : "=r"(__kir) : "rI"(b), "rJ"(a)); \ + __kir; }) +#endif + +#ifdef __alpha_cix__ +# if __GNUC__ == 3 && __GNUC_MINOR__ >= 4 || __GNUC__ > 3 +# define __kernel_cttz(x) __builtin_ctzl(x) +# define __kernel_ctlz(x) __builtin_clzl(x) +# define __kernel_ctpop(x) __builtin_popcountl(x) +# else +# define __kernel_cttz(x) \ + ({ unsigned long __kir; \ + __asm__("cttz %1,%0" : "=r"(__kir) : "r"(x)); \ + __kir; }) +# define __kernel_ctlz(x) \ + ({ unsigned long __kir; \ + __asm__("ctlz %1,%0" : "=r"(__kir) : "r"(x)); \ + __kir; }) +# define __kernel_ctpop(x) \ + ({ unsigned long __kir; \ + __asm__("ctpop %1,%0" : "=r"(__kir) : "r"(x)); \ + __kir; }) +# endif +#else +# define __kernel_cttz(x) \ + ({ unsigned long __kir; \ + __asm__(".arch ev67; cttz %1,%0" : "=r"(__kir) : "r"(x)); \ + __kir; }) +# define __kernel_ctlz(x) \ + ({ unsigned long __kir; \ + __asm__(".arch ev67; ctlz %1,%0" : "=r"(__kir) : "r"(x)); \ + __kir; }) +# define __kernel_ctpop(x) \ + ({ unsigned long __kir; \ + __asm__(".arch ev67; ctpop %1,%0" : "=r"(__kir) : "r"(x)); \ + __kir; }) +#endif + + +/* + * Beginning with EGCS 1.1, GCC defines __alpha_bwx__ when the BWX + * extension is enabled. Previous versions did not define anything + * we could test during compilation -- too bad, so sad. + */ + +#if defined(__alpha_bwx__) +#define __kernel_ldbu(mem) (mem) +#define __kernel_ldwu(mem) (mem) +#define __kernel_stb(val,mem) ((mem) = (val)) +#define __kernel_stw(val,mem) ((mem) = (val)) +#else +#define __kernel_ldbu(mem) \ + ({ unsigned char __kir; \ + __asm__(".arch ev56; \ + ldbu %0,%1" : "=r"(__kir) : "m"(mem)); \ + __kir; }) +#define __kernel_ldwu(mem) \ + ({ unsigned short __kir; \ + __asm__(".arch ev56; \ + ldwu %0,%1" : "=r"(__kir) : "m"(mem)); \ + __kir; }) +#define __kernel_stb(val,mem) \ + __asm__(".arch ev56; \ + stb %1,%0" : "=m"(mem) : "r"(val)) +#define __kernel_stw(val,mem) \ + __asm__(".arch ev56; \ + stw %1,%0" : "=m"(mem) : "r"(val)) +#endif + +#ifdef __KERNEL__ +/* Some idiots over in <linux/compiler.h> thought inline should imply + always_inline. This breaks stuff. We'll include this file whenever + we run into such problems. */ + +#include <linux/compiler.h> +#undef inline +#undef __inline__ +#undef __inline +#undef __always_inline +#define __always_inline inline __attribute__((always_inline)) + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_COMPILER_H */ diff --git a/arch/alpha/include/asm/console.h b/arch/alpha/include/asm/console.h new file mode 100644 index 000000000000..a3ce4e62249b --- /dev/null +++ b/arch/alpha/include/asm/console.h @@ -0,0 +1,75 @@ +#ifndef __AXP_CONSOLE_H +#define __AXP_CONSOLE_H + +/* + * Console callback routine numbers + */ +#define CCB_GETC 0x01 +#define CCB_PUTS 0x02 +#define CCB_RESET_TERM 0x03 +#define CCB_SET_TERM_INT 0x04 +#define CCB_SET_TERM_CTL 0x05 +#define CCB_PROCESS_KEYCODE 0x06 +#define CCB_OPEN_CONSOLE 0x07 +#define CCB_CLOSE_CONSOLE 0x08 + +#define CCB_OPEN 0x10 +#define CCB_CLOSE 0x11 +#define CCB_IOCTL 0x12 +#define CCB_READ 0x13 +#define CCB_WRITE 0x14 + +#define CCB_SET_ENV 0x20 +#define CCB_RESET_ENV 0x21 +#define CCB_GET_ENV 0x22 +#define CCB_SAVE_ENV 0x23 + +#define CCB_PSWITCH 0x30 +#define CCB_BIOS_EMUL 0x32 + +/* + * Environment variable numbers + */ +#define ENV_AUTO_ACTION 0x01 +#define ENV_BOOT_DEV 0x02 +#define ENV_BOOTDEF_DEV 0x03 +#define ENV_BOOTED_DEV 0x04 +#define ENV_BOOT_FILE 0x05 +#define ENV_BOOTED_FILE 0x06 +#define ENV_BOOT_OSFLAGS 0x07 +#define ENV_BOOTED_OSFLAGS 0x08 +#define ENV_BOOT_RESET 0x09 +#define ENV_DUMP_DEV 0x0A +#define ENV_ENABLE_AUDIT 0x0B +#define ENV_LICENSE 0x0C +#define ENV_CHAR_SET 0x0D +#define ENV_LANGUAGE 0x0E +#define ENV_TTY_DEV 0x0F + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +extern long callback_puts(long unit, const char *s, long length); +extern long callback_getc(long unit); +extern long callback_open_console(void); +extern long callback_close_console(void); +extern long callback_open(const char *device, long length); +extern long callback_close(long unit); +extern long callback_read(long channel, long count, const char *buf, long lbn); +extern long callback_getenv(long id, const char *buf, unsigned long buf_size); +extern long callback_setenv(long id, const char *buf, unsigned long buf_size); +extern long callback_save_env(void); + +extern int srm_fixup(unsigned long new_callback_addr, + unsigned long new_hwrpb_addr); +extern long srm_puts(const char *, long); +extern long srm_printk(const char *, ...) + __attribute__ ((format (printf, 1, 2))); + +struct crb_struct; +struct hwrpb_struct; +extern int callback_init_done; +extern void * callback_init(void *); +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ + +#endif /* __AXP_CONSOLE_H */ diff --git a/arch/alpha/include/asm/core_apecs.h b/arch/alpha/include/asm/core_apecs.h new file mode 100644 index 000000000000..6785ff7e02bc --- /dev/null +++ b/arch/alpha/include/asm/core_apecs.h @@ -0,0 +1,517 @@ +#ifndef __ALPHA_APECS__H__ +#define __ALPHA_APECS__H__ + +#include <linux/types.h> +#include <asm/compiler.h> + +/* + * APECS is the internal name for the 2107x chipset which provides + * memory controller and PCI access for the 21064 chip based systems. + * + * This file is based on: + * + * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets + * Data Sheet + * + * EC-N0648-72 + * + * + * david.rusling@reo.mts.dec.com Initial Version. + * + */ + +/* + An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address + that get passed through the PCI<->ISA bridge chip. So we've gotta use + both windows to max out the physical memory we can DMA to. Sigh... + + If we try a window at 0 for 1GB as a work-around, we run into conflicts + with ISA/PCI bus memory which can't be relocated, like VGA aperture and + BIOS ROMs. So we must put the windows high enough to avoid these areas. + + We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1, + and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1. + Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually + be used for that range (via virt_to_bus()). + + Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb, + to keep virt_to_bus() from returning an address in the first window, for + a data area that goes beyond the 64Mb first DMA window. Sigh... + The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but + we can't just use that here, because of header file looping... :-( + + Window 1 will be used for all DMA from the ISA bus; yes, that does + limit what memory an ISA floppy or sound card or Ethernet can touch, but + it's also a known limitation on other platforms as well. We use the + same technique that is used on INTEL platforms with similar limitation: + set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init(). + We trust that any ISA bus device drivers will *always* ask for DMAable + memory explicitly via kmalloc()/get_free_pages() flags arguments. + + Note that most PCI bus devices' drivers do *not* explicitly ask for + DMAable memory; they count on being able to DMA to any memory they + get from kmalloc()/get_free_pages(). They will also use window 1 for + any physical memory accesses below 64Mb; the rest will be handled by + window 2, maxing out at 1Gb of memory. I trust this is enough... :-) + + We hope that the area before the first window is large enough so that + there will be no overlap at the top end (64Mb). We *must* locate the + PCI cards' memory just below window 1, so that there's still the + possibility of being able to access it via SPARSE space. This is + important for cards such as the Matrox Millennium, whose Xserver + wants to access memory-mapped registers in byte and short lengths. + + Note that the XL is treated differently from the AVANTI, even though + for most other things they are identical. It didn't seem reasonable to + make the AVANTI support pay for the limitations of the XL. It is true, + however, that an XL kernel will run on an AVANTI without problems. + + %%% All of this should be obviated by the ability to route + everything through the iommu. +*/ + +/* + * 21071-DA Control and Status registers. + * These are used for PCI memory access. + */ +#define APECS_IOC_DCSR (IDENT_ADDR + 0x1A0000000UL) +#define APECS_IOC_PEAR (IDENT_ADDR + 0x1A0000020UL) +#define APECS_IOC_SEAR (IDENT_ADDR + 0x1A0000040UL) +#define APECS_IOC_DR1 (IDENT_ADDR + 0x1A0000060UL) +#define APECS_IOC_DR2 (IDENT_ADDR + 0x1A0000080UL) +#define APECS_IOC_DR3 (IDENT_ADDR + 0x1A00000A0UL) + +#define APECS_IOC_TB1R (IDENT_ADDR + 0x1A00000C0UL) +#define APECS_IOC_TB2R (IDENT_ADDR + 0x1A00000E0UL) + +#define APECS_IOC_PB1R (IDENT_ADDR + 0x1A0000100UL) +#define APECS_IOC_PB2R (IDENT_ADDR + 0x1A0000120UL) + +#define APECS_IOC_PM1R (IDENT_ADDR + 0x1A0000140UL) +#define APECS_IOC_PM2R (IDENT_ADDR + 0x1A0000160UL) + +#define APECS_IOC_HAXR0 (IDENT_ADDR + 0x1A0000180UL) +#define APECS_IOC_HAXR1 (IDENT_ADDR + 0x1A00001A0UL) +#define APECS_IOC_HAXR2 (IDENT_ADDR + 0x1A00001C0UL) + +#define APECS_IOC_PMLT (IDENT_ADDR + 0x1A00001E0UL) + +#define APECS_IOC_TLBTAG0 (IDENT_ADDR + 0x1A0000200UL) +#define APECS_IOC_TLBTAG1 (IDENT_ADDR + 0x1A0000220UL) +#define APECS_IOC_TLBTAG2 (IDENT_ADDR + 0x1A0000240UL) +#define APECS_IOC_TLBTAG3 (IDENT_ADDR + 0x1A0000260UL) +#define APECS_IOC_TLBTAG4 (IDENT_ADDR + 0x1A0000280UL) +#define APECS_IOC_TLBTAG5 (IDENT_ADDR + 0x1A00002A0UL) +#define APECS_IOC_TLBTAG6 (IDENT_ADDR + 0x1A00002C0UL) +#define APECS_IOC_TLBTAG7 (IDENT_ADDR + 0x1A00002E0UL) + +#define APECS_IOC_TLBDATA0 (IDENT_ADDR + 0x1A0000300UL) +#define APECS_IOC_TLBDATA1 (IDENT_ADDR + 0x1A0000320UL) +#define APECS_IOC_TLBDATA2 (IDENT_ADDR + 0x1A0000340UL) +#define APECS_IOC_TLBDATA3 (IDENT_ADDR + 0x1A0000360UL) +#define APECS_IOC_TLBDATA4 (IDENT_ADDR + 0x1A0000380UL) +#define APECS_IOC_TLBDATA5 (IDENT_ADDR + 0x1A00003A0UL) +#define APECS_IOC_TLBDATA6 (IDENT_ADDR + 0x1A00003C0UL) +#define APECS_IOC_TLBDATA7 (IDENT_ADDR + 0x1A00003E0UL) + +#define APECS_IOC_TBIA (IDENT_ADDR + 0x1A0000400UL) + + +/* + * 21071-CA Control and Status registers. + * These are used to program memory timing, + * configure memory and initialise the B-Cache. + */ +#define APECS_MEM_GCR (IDENT_ADDR + 0x180000000UL) +#define APECS_MEM_EDSR (IDENT_ADDR + 0x180000040UL) +#define APECS_MEM_TAR (IDENT_ADDR + 0x180000060UL) +#define APECS_MEM_ELAR (IDENT_ADDR + 0x180000080UL) +#define APECS_MEM_EHAR (IDENT_ADDR + 0x1800000a0UL) +#define APECS_MEM_SFT_RST (IDENT_ADDR + 0x1800000c0UL) +#define APECS_MEM_LDxLAR (IDENT_ADDR + 0x1800000e0UL) +#define APECS_MEM_LDxHAR (IDENT_ADDR + 0x180000100UL) +#define APECS_MEM_GTR (IDENT_ADDR + 0x180000200UL) +#define APECS_MEM_RTR (IDENT_ADDR + 0x180000220UL) +#define APECS_MEM_VFPR (IDENT_ADDR + 0x180000240UL) +#define APECS_MEM_PDLDR (IDENT_ADDR + 0x180000260UL) +#define APECS_MEM_PDhDR (IDENT_ADDR + 0x180000280UL) + +/* Bank x Base Address Register */ +#define APECS_MEM_B0BAR (IDENT_ADDR + 0x180000800UL) +#define APECS_MEM_B1BAR (IDENT_ADDR + 0x180000820UL) +#define APECS_MEM_B2BAR (IDENT_ADDR + 0x180000840UL) +#define APECS_MEM_B3BAR (IDENT_ADDR + 0x180000860UL) +#define APECS_MEM_B4BAR (IDENT_ADDR + 0x180000880UL) +#define APECS_MEM_B5BAR (IDENT_ADDR + 0x1800008A0UL) +#define APECS_MEM_B6BAR (IDENT_ADDR + 0x1800008C0UL) +#define APECS_MEM_B7BAR (IDENT_ADDR + 0x1800008E0UL) +#define APECS_MEM_B8BAR (IDENT_ADDR + 0x180000900UL) + +/* Bank x Configuration Register */ +#define APECS_MEM_B0BCR (IDENT_ADDR + 0x180000A00UL) +#define APECS_MEM_B1BCR (IDENT_ADDR + 0x180000A20UL) +#define APECS_MEM_B2BCR (IDENT_ADDR + 0x180000A40UL) +#define APECS_MEM_B3BCR (IDENT_ADDR + 0x180000A60UL) +#define APECS_MEM_B4BCR (IDENT_ADDR + 0x180000A80UL) +#define APECS_MEM_B5BCR (IDENT_ADDR + 0x180000AA0UL) +#define APECS_MEM_B6BCR (IDENT_ADDR + 0x180000AC0UL) +#define APECS_MEM_B7BCR (IDENT_ADDR + 0x180000AE0UL) +#define APECS_MEM_B8BCR (IDENT_ADDR + 0x180000B00UL) + +/* Bank x Timing Register A */ +#define APECS_MEM_B0TRA (IDENT_ADDR + 0x180000C00UL) +#define APECS_MEM_B1TRA (IDENT_ADDR + 0x180000C20UL) +#define APECS_MEM_B2TRA (IDENT_ADDR + 0x180000C40UL) +#define APECS_MEM_B3TRA (IDENT_ADDR + 0x180000C60UL) +#define APECS_MEM_B4TRA (IDENT_ADDR + 0x180000C80UL) +#define APECS_MEM_B5TRA (IDENT_ADDR + 0x180000CA0UL) +#define APECS_MEM_B6TRA (IDENT_ADDR + 0x180000CC0UL) +#define APECS_MEM_B7TRA (IDENT_ADDR + 0x180000CE0UL) +#define APECS_MEM_B8TRA (IDENT_ADDR + 0x180000D00UL) + +/* Bank x Timing Register B */ +#define APECS_MEM_B0TRB (IDENT_ADDR + 0x180000E00UL) +#define APECS_MEM_B1TRB (IDENT_ADDR + 0x180000E20UL) +#define APECS_MEM_B2TRB (IDENT_ADDR + 0x180000E40UL) +#define APECS_MEM_B3TRB (IDENT_ADDR + 0x180000E60UL) +#define APECS_MEM_B4TRB (IDENT_ADDR + 0x180000E80UL) +#define APECS_MEM_B5TRB (IDENT_ADDR + 0x180000EA0UL) +#define APECS_MEM_B6TRB (IDENT_ADDR + 0x180000EC0UL) +#define APECS_MEM_B7TRB (IDENT_ADDR + 0x180000EE0UL) +#define APECS_MEM_B8TRB (IDENT_ADDR + 0x180000F00UL) + + +/* + * Memory spaces: + */ +#define APECS_IACK_SC (IDENT_ADDR + 0x1b0000000UL) +#define APECS_CONF (IDENT_ADDR + 0x1e0000000UL) +#define APECS_IO (IDENT_ADDR + 0x1c0000000UL) +#define APECS_SPARSE_MEM (IDENT_ADDR + 0x200000000UL) +#define APECS_DENSE_MEM (IDENT_ADDR + 0x300000000UL) + + +/* + * Bit definitions for I/O Controller status register 0: + */ +#define APECS_IOC_STAT0_CMD 0xf +#define APECS_IOC_STAT0_ERR (1<<4) +#define APECS_IOC_STAT0_LOST (1<<5) +#define APECS_IOC_STAT0_THIT (1<<6) +#define APECS_IOC_STAT0_TREF (1<<7) +#define APECS_IOC_STAT0_CODE_SHIFT 8 +#define APECS_IOC_STAT0_CODE_MASK 0x7 +#define APECS_IOC_STAT0_P_NBR_SHIFT 13 +#define APECS_IOC_STAT0_P_NBR_MASK 0x7ffff + +#define APECS_HAE_ADDRESS APECS_IOC_HAXR1 + + +/* + * Data structure for handling APECS machine checks: + */ + +struct el_apecs_mikasa_sysdata_mcheck +{ + unsigned long coma_gcr; + unsigned long coma_edsr; + unsigned long coma_ter; + unsigned long coma_elar; + unsigned long coma_ehar; + unsigned long coma_ldlr; + unsigned long coma_ldhr; + unsigned long coma_base0; + unsigned long coma_base1; + unsigned long coma_base2; + unsigned long coma_base3; + unsigned long coma_cnfg0; + unsigned long coma_cnfg1; + unsigned long coma_cnfg2; + unsigned long coma_cnfg3; + unsigned long epic_dcsr; + unsigned long epic_pear; + unsigned long epic_sear; + unsigned long epic_tbr1; + unsigned long epic_tbr2; + unsigned long epic_pbr1; + unsigned long epic_pbr2; + unsigned long epic_pmr1; + unsigned long epic_pmr2; + unsigned long epic_harx1; + unsigned long epic_harx2; + unsigned long epic_pmlt; + unsigned long epic_tag0; + unsigned long epic_tag1; + unsigned long epic_tag2; + unsigned long epic_tag3; + unsigned long epic_tag4; + unsigned long epic_tag5; + unsigned long epic_tag6; + unsigned long epic_tag7; + unsigned long epic_data0; + unsigned long epic_data1; + unsigned long epic_data2; + unsigned long epic_data3; + unsigned long epic_data4; + unsigned long epic_data5; + unsigned long epic_data6; + unsigned long epic_data7; + + unsigned long pceb_vid; + unsigned long pceb_did; + unsigned long pceb_revision; + unsigned long pceb_command; + unsigned long pceb_status; + unsigned long pceb_latency; + unsigned long pceb_control; + unsigned long pceb_arbcon; + unsigned long pceb_arbpri; + + unsigned long esc_id; + unsigned long esc_revision; + unsigned long esc_int0; + unsigned long esc_int1; + unsigned long esc_elcr0; + unsigned long esc_elcr1; + unsigned long esc_last_eisa; + unsigned long esc_nmi_stat; + + unsigned long pci_ir; + unsigned long pci_imr; + unsigned long svr_mgr; +}; + +/* This for the normal APECS machines. */ +struct el_apecs_sysdata_mcheck +{ + unsigned long coma_gcr; + unsigned long coma_edsr; + unsigned long coma_ter; + unsigned long coma_elar; + unsigned long coma_ehar; + unsigned long coma_ldlr; + unsigned long coma_ldhr; + unsigned long coma_base0; + unsigned long coma_base1; + unsigned long coma_base2; + unsigned long coma_cnfg0; + unsigned long coma_cnfg1; + unsigned long coma_cnfg2; + unsigned long epic_dcsr; + unsigned long epic_pear; + unsigned long epic_sear; + unsigned long epic_tbr1; + unsigned long epic_tbr2; + unsigned long epic_pbr1; + unsigned long epic_pbr2; + unsigned long epic_pmr1; + unsigned long epic_pmr2; + unsigned long epic_harx1; + unsigned long epic_harx2; + unsigned long epic_pmlt; + unsigned long epic_tag0; + unsigned long epic_tag1; + unsigned long epic_tag2; + unsigned long epic_tag3; + unsigned long epic_tag4; + unsigned long epic_tag5; + unsigned long epic_tag6; + unsigned long epic_tag7; + unsigned long epic_data0; + unsigned long epic_data1; + unsigned long epic_data2; + unsigned long epic_data3; + unsigned long epic_data4; + unsigned long epic_data5; + unsigned long epic_data6; + unsigned long epic_data7; +}; + +struct el_apecs_procdata +{ + unsigned long paltemp[32]; /* PAL TEMP REGS. */ + /* EV4-specific fields */ + unsigned long exc_addr; /* Address of excepting instruction. */ + unsigned long exc_sum; /* Summary of arithmetic traps. */ + unsigned long exc_mask; /* Exception mask (from exc_sum). */ + unsigned long iccsr; /* IBox hardware enables. */ + unsigned long pal_base; /* Base address for PALcode. */ + unsigned long hier; /* Hardware Interrupt Enable. */ + unsigned long hirr; /* Hardware Interrupt Request. */ + unsigned long csr; /* D-stream fault info. */ + unsigned long dc_stat; /* D-cache status (ECC/Parity Err). */ + unsigned long dc_addr; /* EV3 Phys Addr for ECC/DPERR. */ + unsigned long abox_ctl; /* ABox Control Register. */ + unsigned long biu_stat; /* BIU Status. */ + unsigned long biu_addr; /* BUI Address. */ + unsigned long biu_ctl; /* BIU Control. */ + unsigned long fill_syndrome;/* For correcting ECC errors. */ + unsigned long fill_addr; /* Cache block which was being read */ + unsigned long va; /* Effective VA of fault or miss. */ + unsigned long bc_tag; /* Backup Cache Tag Probe Results.*/ +}; + + +#ifdef __KERNEL__ + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __IO_EXTERN_INLINE +#endif + +/* + * I/O functions: + * + * Unlike Jensen, the APECS machines have no concept of local + * I/O---everything goes over the PCI bus. + * + * There is plenty room for optimization here. In particular, + * the Alpha's insb/insw/extb/extw should be useful in moving + * data to/from the right byte-lanes. + */ + +#define vip volatile int __force * +#define vuip volatile unsigned int __force * +#define vulp volatile unsigned long __force * + +#define APECS_SET_HAE \ + do { \ + if (addr >= (1UL << 24)) { \ + unsigned long msb = addr & 0xf8000000; \ + addr -= msb; \ + set_hae(msb); \ + } \ + } while (0) + +__EXTERN_INLINE unsigned int apecs_ioread8(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long result, base_and_type; + + if (addr >= APECS_DENSE_MEM) { + addr -= APECS_DENSE_MEM; + APECS_SET_HAE; + base_and_type = APECS_SPARSE_MEM + 0x00; + } else { + addr -= APECS_IO; + base_and_type = APECS_IO + 0x00; + } + + result = *(vip) ((addr << 5) + base_and_type); + return __kernel_extbl(result, addr & 3); +} + +__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long w, base_and_type; + + if (addr >= APECS_DENSE_MEM) { + addr -= APECS_DENSE_MEM; + APECS_SET_HAE; + base_and_type = APECS_SPARSE_MEM + 0x00; + } else { + addr -= APECS_IO; + base_and_type = APECS_IO + 0x00; + } + + w = __kernel_insbl(b, addr & 3); + *(vuip) ((addr << 5) + base_and_type) = w; +} + +__EXTERN_INLINE unsigned int apecs_ioread16(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long result, base_and_type; + + if (addr >= APECS_DENSE_MEM) { + addr -= APECS_DENSE_MEM; + APECS_SET_HAE; + base_and_type = APECS_SPARSE_MEM + 0x08; + } else { + addr -= APECS_IO; + base_and_type = APECS_IO + 0x08; + } + + result = *(vip) ((addr << 5) + base_and_type); + return __kernel_extwl(result, addr & 3); +} + +__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long w, base_and_type; + + if (addr >= APECS_DENSE_MEM) { + addr -= APECS_DENSE_MEM; + APECS_SET_HAE; + base_and_type = APECS_SPARSE_MEM + 0x08; + } else { + addr -= APECS_IO; + base_and_type = APECS_IO + 0x08; + } + + w = __kernel_inswl(b, addr & 3); + *(vuip) ((addr << 5) + base_and_type) = w; +} + +__EXTERN_INLINE unsigned int apecs_ioread32(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < APECS_DENSE_MEM) + addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18; + return *(vuip)addr; +} + +__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < APECS_DENSE_MEM) + addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18; + *(vuip)addr = b; +} + +__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr) +{ + return (void __iomem *)(addr + APECS_IO); +} + +__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr, + unsigned long size) +{ + return (void __iomem *)(addr + APECS_DENSE_MEM); +} + +__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr) +{ + return addr >= IDENT_ADDR + 0x180000000UL; +} + +__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= APECS_DENSE_MEM; +} + +#undef APECS_SET_HAE + +#undef vip +#undef vuip +#undef vulp + +#undef __IO_PREFIX +#define __IO_PREFIX apecs +#define apecs_trivial_io_bw 0 +#define apecs_trivial_io_lq 0 +#define apecs_trivial_rw_bw 2 +#define apecs_trivial_rw_lq 1 +#define apecs_trivial_iounmap 1 +#include <asm/io_trivial.h> + +#ifdef __IO_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_APECS__H__ */ diff --git a/arch/alpha/include/asm/core_cia.h b/arch/alpha/include/asm/core_cia.h new file mode 100644 index 000000000000..9e0516c0ca27 --- /dev/null +++ b/arch/alpha/include/asm/core_cia.h @@ -0,0 +1,500 @@ +#ifndef __ALPHA_CIA__H__ +#define __ALPHA_CIA__H__ + +/* Define to experiment with fitting everything into one 512MB HAE window. */ +#define CIA_ONE_HAE_WINDOW 1 + +#include <linux/types.h> +#include <asm/compiler.h> + +/* + * CIA is the internal name for the 21171 chipset which provides + * memory controller and PCI access for the 21164 chip based systems. + * Also supported here is the 21172 (CIA-2) and 21174 (PYXIS). + * + * The lineage is a bit confused, since the 21174 was reportedly started + * from the 21171 Pass 1 mask, and so is missing bug fixes that appear + * in 21171 Pass 2 and 21172, but it also contains additional features. + * + * This file is based on: + * + * DECchip 21171 Core Logic Chipset + * Technical Reference Manual + * + * EC-QE18B-TE + * + * david.rusling@reo.mts.dec.com Initial Version. + * + */ + +/* + * CIA ADDRESS BIT DEFINITIONS + * + * 3333 3333 3322 2222 2222 1111 1111 11 + * 9876 5432 1098 7654 3210 9876 5432 1098 7654 3210 + * ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- + * 1 000 + * ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- + * | |\| + * | Byte Enable --+ | + * | Transfer Length --+ + * +-- IO space, not cached + * + * Byte Transfer + * Enable Length Transfer Byte Address + * adr<6:5> adr<4:3> Length Enable Adder + * --------------------------------------------- + * 00 00 Byte 1110 0x000 + * 01 00 Byte 1101 0x020 + * 10 00 Byte 1011 0x040 + * 11 00 Byte 0111 0x060 + * + * 00 01 Word 1100 0x008 + * 01 01 Word 1001 0x028 <= Not supported in this code. + * 10 01 Word 0011 0x048 + * + * 00 10 Tribyte 1000 0x010 + * 01 10 Tribyte 0001 0x030 + * + * 10 11 Longword 0000 0x058 + * + * Note that byte enables are asserted low. + * + */ + +#define CIA_MEM_R1_MASK 0x1fffffff /* SPARSE Mem region 1 mask is 29 bits */ +#define CIA_MEM_R2_MASK 0x07ffffff /* SPARSE Mem region 2 mask is 27 bits */ +#define CIA_MEM_R3_MASK 0x03ffffff /* SPARSE Mem region 3 mask is 26 bits */ + +/* + * 21171-CA Control and Status Registers + */ +#define CIA_IOC_CIA_REV (IDENT_ADDR + 0x8740000080UL) +# define CIA_REV_MASK 0xff +#define CIA_IOC_PCI_LAT (IDENT_ADDR + 0x87400000C0UL) +#define CIA_IOC_CIA_CTRL (IDENT_ADDR + 0x8740000100UL) +# define CIA_CTRL_PCI_EN (1 << 0) +# define CIA_CTRL_PCI_LOCK_EN (1 << 1) +# define CIA_CTRL_PCI_LOOP_EN (1 << 2) +# define CIA_CTRL_FST_BB_EN (1 << 3) +# define CIA_CTRL_PCI_MST_EN (1 << 4) +# define CIA_CTRL_PCI_MEM_EN (1 << 5) +# define CIA_CTRL_PCI_REQ64_EN (1 << 6) +# define CIA_CTRL_PCI_ACK64_EN (1 << 7) +# define CIA_CTRL_ADDR_PE_EN (1 << 8) +# define CIA_CTRL_PERR_EN (1 << 9) +# define CIA_CTRL_FILL_ERR_EN (1 << 10) +# define CIA_CTRL_MCHK_ERR_EN (1 << 11) +# define CIA_CTRL_ECC_CHK_EN (1 << 12) +# define CIA_CTRL_ASSERT_IDLE_BC (1 << 13) +# define CIA_CTRL_COM_IDLE_BC (1 << 14) +# define CIA_CTRL_CSR_IOA_BYPASS (1 << 15) +# define CIA_CTRL_IO_FLUSHREQ_EN (1 << 16) +# define CIA_CTRL_CPU_FLUSHREQ_EN (1 << 17) +# define CIA_CTRL_ARB_CPU_EN (1 << 18) +# define CIA_CTRL_EN_ARB_LINK (1 << 19) +# define CIA_CTRL_RD_TYPE_SHIFT 20 +# define CIA_CTRL_RL_TYPE_SHIFT 24 +# define CIA_CTRL_RM_TYPE_SHIFT 28 +# define CIA_CTRL_EN_DMA_RD_PERF (1 << 31) +#define CIA_IOC_CIA_CNFG (IDENT_ADDR + 0x8740000140UL) +# define CIA_CNFG_IOA_BWEN (1 << 0) +# define CIA_CNFG_PCI_MWEN (1 << 4) +# define CIA_CNFG_PCI_DWEN (1 << 5) +# define CIA_CNFG_PCI_WLEN (1 << 8) +#define CIA_IOC_FLASH_CTRL (IDENT_ADDR + 0x8740000200UL) +#define CIA_IOC_HAE_MEM (IDENT_ADDR + 0x8740000400UL) +#define CIA_IOC_HAE_IO (IDENT_ADDR + 0x8740000440UL) +#define CIA_IOC_CFG (IDENT_ADDR + 0x8740000480UL) +#define CIA_IOC_CACK_EN (IDENT_ADDR + 0x8740000600UL) +# define CIA_CACK_EN_LOCK_EN (1 << 0) +# define CIA_CACK_EN_MB_EN (1 << 1) +# define CIA_CACK_EN_SET_DIRTY_EN (1 << 2) +# define CIA_CACK_EN_BC_VICTIM_EN (1 << 3) + + +/* + * 21171-CA Diagnostic Registers + */ +#define CIA_IOC_CIA_DIAG (IDENT_ADDR + 0x8740002000UL) +#define CIA_IOC_DIAG_CHECK (IDENT_ADDR + 0x8740003000UL) + +/* + * 21171-CA Performance Monitor registers + */ +#define CIA_IOC_PERF_MONITOR (IDENT_ADDR + 0x8740004000UL) +#define CIA_IOC_PERF_CONTROL (IDENT_ADDR + 0x8740004040UL) + +/* + * 21171-CA Error registers + */ +#define CIA_IOC_CPU_ERR0 (IDENT_ADDR + 0x8740008000UL) +#define CIA_IOC_CPU_ERR1 (IDENT_ADDR + 0x8740008040UL) +#define CIA_IOC_CIA_ERR (IDENT_ADDR + 0x8740008200UL) +# define CIA_ERR_COR_ERR (1 << 0) +# define CIA_ERR_UN_COR_ERR (1 << 1) +# define CIA_ERR_CPU_PE (1 << 2) +# define CIA_ERR_MEM_NEM (1 << 3) +# define CIA_ERR_PCI_SERR (1 << 4) +# define CIA_ERR_PERR (1 << 5) +# define CIA_ERR_PCI_ADDR_PE (1 << 6) +# define CIA_ERR_RCVD_MAS_ABT (1 << 7) +# define CIA_ERR_RCVD_TAR_ABT (1 << 8) +# define CIA_ERR_PA_PTE_INV (1 << 9) +# define CIA_ERR_FROM_WRT_ERR (1 << 10) +# define CIA_ERR_IOA_TIMEOUT (1 << 11) +# define CIA_ERR_LOST_CORR_ERR (1 << 16) +# define CIA_ERR_LOST_UN_CORR_ERR (1 << 17) +# define CIA_ERR_LOST_CPU_PE (1 << 18) +# define CIA_ERR_LOST_MEM_NEM (1 << 19) +# define CIA_ERR_LOST_PERR (1 << 21) +# define CIA_ERR_LOST_PCI_ADDR_PE (1 << 22) +# define CIA_ERR_LOST_RCVD_MAS_ABT (1 << 23) +# define CIA_ERR_LOST_RCVD_TAR_ABT (1 << 24) +# define CIA_ERR_LOST_PA_PTE_INV (1 << 25) +# define CIA_ERR_LOST_FROM_WRT_ERR (1 << 26) +# define CIA_ERR_LOST_IOA_TIMEOUT (1 << 27) +# define CIA_ERR_VALID (1 << 31) +#define CIA_IOC_CIA_STAT (IDENT_ADDR + 0x8740008240UL) +#define CIA_IOC_ERR_MASK (IDENT_ADDR + 0x8740008280UL) +#define CIA_IOC_CIA_SYN (IDENT_ADDR + 0x8740008300UL) +#define CIA_IOC_MEM_ERR0 (IDENT_ADDR + 0x8740008400UL) +#define CIA_IOC_MEM_ERR1 (IDENT_ADDR + 0x8740008440UL) +#define CIA_IOC_PCI_ERR0 (IDENT_ADDR + 0x8740008800UL) +#define CIA_IOC_PCI_ERR1 (IDENT_ADDR + 0x8740008840UL) +#define CIA_IOC_PCI_ERR3 (IDENT_ADDR + 0x8740008880UL) + +/* + * 21171-CA System configuration registers + */ +#define CIA_IOC_MCR (IDENT_ADDR + 0x8750000000UL) +#define CIA_IOC_MBA0 (IDENT_ADDR + 0x8750000600UL) +#define CIA_IOC_MBA2 (IDENT_ADDR + 0x8750000680UL) +#define CIA_IOC_MBA4 (IDENT_ADDR + 0x8750000700UL) +#define CIA_IOC_MBA6 (IDENT_ADDR + 0x8750000780UL) +#define CIA_IOC_MBA8 (IDENT_ADDR + 0x8750000800UL) +#define CIA_IOC_MBAA (IDENT_ADDR + 0x8750000880UL) +#define CIA_IOC_MBAC (IDENT_ADDR + 0x8750000900UL) +#define CIA_IOC_MBAE (IDENT_ADDR + 0x8750000980UL) +#define CIA_IOC_TMG0 (IDENT_ADDR + 0x8750000B00UL) +#define CIA_IOC_TMG1 (IDENT_ADDR + 0x8750000B40UL) +#define CIA_IOC_TMG2 (IDENT_ADDR + 0x8750000B80UL) + +/* + * 2117A-CA PCI Address and Scatter-Gather Registers. + */ +#define CIA_IOC_PCI_TBIA (IDENT_ADDR + 0x8760000100UL) + +#define CIA_IOC_PCI_W0_BASE (IDENT_ADDR + 0x8760000400UL) +#define CIA_IOC_PCI_W0_MASK (IDENT_ADDR + 0x8760000440UL) +#define CIA_IOC_PCI_T0_BASE (IDENT_ADDR + 0x8760000480UL) + +#define CIA_IOC_PCI_W1_BASE (IDENT_ADDR + 0x8760000500UL) +#define CIA_IOC_PCI_W1_MASK (IDENT_ADDR + 0x8760000540UL) +#define CIA_IOC_PCI_T1_BASE (IDENT_ADDR + 0x8760000580UL) + +#define CIA_IOC_PCI_W2_BASE (IDENT_ADDR + 0x8760000600UL) +#define CIA_IOC_PCI_W2_MASK (IDENT_ADDR + 0x8760000640UL) +#define CIA_IOC_PCI_T2_BASE (IDENT_ADDR + 0x8760000680UL) + +#define CIA_IOC_PCI_W3_BASE (IDENT_ADDR + 0x8760000700UL) +#define CIA_IOC_PCI_W3_MASK (IDENT_ADDR + 0x8760000740UL) +#define CIA_IOC_PCI_T3_BASE (IDENT_ADDR + 0x8760000780UL) + +#define CIA_IOC_PCI_Wn_BASE(N) (IDENT_ADDR + 0x8760000400UL + (N)*0x100) +#define CIA_IOC_PCI_Wn_MASK(N) (IDENT_ADDR + 0x8760000440UL + (N)*0x100) +#define CIA_IOC_PCI_Tn_BASE(N) (IDENT_ADDR + 0x8760000480UL + (N)*0x100) + +#define CIA_IOC_PCI_W_DAC (IDENT_ADDR + 0x87600007C0UL) + +/* + * 2117A-CA Address Translation Registers. + */ + +/* 8 tag registers, the first 4 of which are lockable. */ +#define CIA_IOC_TB_TAGn(n) \ + (IDENT_ADDR + 0x8760000800UL + (n)*0x40) + +/* 4 page registers per tag register. */ +#define CIA_IOC_TBn_PAGEm(n,m) \ + (IDENT_ADDR + 0x8760001000UL + (n)*0x100 + (m)*0x40) + +/* + * Memory spaces: + */ +#define CIA_IACK_SC (IDENT_ADDR + 0x8720000000UL) +#define CIA_CONF (IDENT_ADDR + 0x8700000000UL) +#define CIA_IO (IDENT_ADDR + 0x8580000000UL) +#define CIA_SPARSE_MEM (IDENT_ADDR + 0x8000000000UL) +#define CIA_SPARSE_MEM_R2 (IDENT_ADDR + 0x8400000000UL) +#define CIA_SPARSE_MEM_R3 (IDENT_ADDR + 0x8500000000UL) +#define CIA_DENSE_MEM (IDENT_ADDR + 0x8600000000UL) +#define CIA_BW_MEM (IDENT_ADDR + 0x8800000000UL) +#define CIA_BW_IO (IDENT_ADDR + 0x8900000000UL) +#define CIA_BW_CFG_0 (IDENT_ADDR + 0x8a00000000UL) +#define CIA_BW_CFG_1 (IDENT_ADDR + 0x8b00000000UL) + +/* + * ALCOR's GRU ASIC registers + */ +#define GRU_INT_REQ (IDENT_ADDR + 0x8780000000UL) +#define GRU_INT_MASK (IDENT_ADDR + 0x8780000040UL) +#define GRU_INT_EDGE (IDENT_ADDR + 0x8780000080UL) +#define GRU_INT_HILO (IDENT_ADDR + 0x87800000C0UL) +#define GRU_INT_CLEAR (IDENT_ADDR + 0x8780000100UL) + +#define GRU_CACHE_CNFG (IDENT_ADDR + 0x8780000200UL) +#define GRU_SCR (IDENT_ADDR + 0x8780000300UL) +#define GRU_LED (IDENT_ADDR + 0x8780000800UL) +#define GRU_RESET (IDENT_ADDR + 0x8780000900UL) + +#define ALCOR_GRU_INT_REQ_BITS 0x800fffffUL +#define XLT_GRU_INT_REQ_BITS 0x80003fffUL +#define GRU_INT_REQ_BITS (alpha_mv.sys.cia.gru_int_req_bits+0) + +/* + * PYXIS interrupt control registers + */ +#define PYXIS_INT_REQ (IDENT_ADDR + 0x87A0000000UL) +#define PYXIS_INT_MASK (IDENT_ADDR + 0x87A0000040UL) +#define PYXIS_INT_HILO (IDENT_ADDR + 0x87A00000C0UL) +#define PYXIS_INT_ROUTE (IDENT_ADDR + 0x87A0000140UL) +#define PYXIS_GPO (IDENT_ADDR + 0x87A0000180UL) +#define PYXIS_INT_CNFG (IDENT_ADDR + 0x87A00001C0UL) +#define PYXIS_RT_COUNT (IDENT_ADDR + 0x87A0000200UL) +#define PYXIS_INT_TIME (IDENT_ADDR + 0x87A0000240UL) +#define PYXIS_IIC_CTRL (IDENT_ADDR + 0x87A00002C0UL) +#define PYXIS_RESET (IDENT_ADDR + 0x8780000900UL) + +/* Offset between ram physical addresses and pci64 DAC bus addresses. */ +#define PYXIS_DAC_OFFSET (1UL << 40) + +/* + * Data structure for handling CIA machine checks. + */ + +/* System-specific info. */ +struct el_CIA_sysdata_mcheck { + unsigned long cpu_err0; + unsigned long cpu_err1; + unsigned long cia_err; + unsigned long cia_stat; + unsigned long err_mask; + unsigned long cia_syn; + unsigned long mem_err0; + unsigned long mem_err1; + unsigned long pci_err0; + unsigned long pci_err1; + unsigned long pci_err2; +}; + + +#ifdef __KERNEL__ + +#ifndef __EXTERN_INLINE +/* Do not touch, this should *NOT* be static inline */ +#define __EXTERN_INLINE extern inline +#define __IO_EXTERN_INLINE +#endif + +/* + * I/O functions: + * + * CIA (the 2117x PCI/memory support chipset for the EV5 (21164) + * series of processors uses a sparse address mapping scheme to + * get at PCI memory and I/O. + */ + +/* + * Memory functions. 64-bit and 32-bit accesses are done through + * dense memory space, everything else through sparse space. + * + * For reading and writing 8 and 16 bit quantities we need to + * go through one of the three sparse address mapping regions + * and use the HAE_MEM CSR to provide some bits of the address. + * The following few routines use only sparse address region 1 + * which gives 1Gbyte of accessible space which relates exactly + * to the amount of PCI memory mapping *into* system address space. + * See p 6-17 of the specification but it looks something like this: + * + * 21164 Address: + * + * 3 2 1 + * 9876543210987654321098765432109876543210 + * 1ZZZZ0.PCI.QW.Address............BBLL + * + * ZZ = SBZ + * BB = Byte offset + * LL = Transfer length + * + * PCI Address: + * + * 3 2 1 + * 10987654321098765432109876543210 + * HHH....PCI.QW.Address........ 00 + * + * HHH = 31:29 HAE_MEM CSR + * + */ + +#define vip volatile int __force * +#define vuip volatile unsigned int __force * +#define vulp volatile unsigned long __force * + +__EXTERN_INLINE unsigned int cia_ioread8(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long result, base_and_type; + + if (addr >= CIA_DENSE_MEM) + base_and_type = CIA_SPARSE_MEM + 0x00; + else + base_and_type = CIA_IO + 0x00; + + /* We can use CIA_MEM_R1_MASK for io ports too, since it is large + enough to cover all io ports, and smaller than CIA_IO. */ + addr &= CIA_MEM_R1_MASK; + result = *(vip) ((addr << 5) + base_and_type); + return __kernel_extbl(result, addr & 3); +} + +__EXTERN_INLINE void cia_iowrite8(u8 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long w, base_and_type; + + if (addr >= CIA_DENSE_MEM) + base_and_type = CIA_SPARSE_MEM + 0x00; + else + base_and_type = CIA_IO + 0x00; + + addr &= CIA_MEM_R1_MASK; + w = __kernel_insbl(b, addr & 3); + *(vuip) ((addr << 5) + base_and_type) = w; +} + +__EXTERN_INLINE unsigned int cia_ioread16(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long result, base_and_type; + + if (addr >= CIA_DENSE_MEM) + base_and_type = CIA_SPARSE_MEM + 0x08; + else + base_and_type = CIA_IO + 0x08; + + addr &= CIA_MEM_R1_MASK; + result = *(vip) ((addr << 5) + base_and_type); + return __kernel_extwl(result, addr & 3); +} + +__EXTERN_INLINE void cia_iowrite16(u16 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long w, base_and_type; + + if (addr >= CIA_DENSE_MEM) + base_and_type = CIA_SPARSE_MEM + 0x08; + else + base_and_type = CIA_IO + 0x08; + + addr &= CIA_MEM_R1_MASK; + w = __kernel_inswl(b, addr & 3); + *(vuip) ((addr << 5) + base_and_type) = w; +} + +__EXTERN_INLINE unsigned int cia_ioread32(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < CIA_DENSE_MEM) + addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18; + return *(vuip)addr; +} + +__EXTERN_INLINE void cia_iowrite32(u32 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < CIA_DENSE_MEM) + addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18; + *(vuip)addr = b; +} + +__EXTERN_INLINE void __iomem *cia_ioportmap(unsigned long addr) +{ + return (void __iomem *)(addr + CIA_IO); +} + +__EXTERN_INLINE void __iomem *cia_ioremap(unsigned long addr, + unsigned long size) +{ + return (void __iomem *)(addr + CIA_DENSE_MEM); +} + +__EXTERN_INLINE int cia_is_ioaddr(unsigned long addr) +{ + return addr >= IDENT_ADDR + 0x8000000000UL; +} + +__EXTERN_INLINE int cia_is_mmio(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= CIA_DENSE_MEM; +} + +__EXTERN_INLINE void __iomem *cia_bwx_ioportmap(unsigned long addr) +{ + return (void __iomem *)(addr + CIA_BW_IO); +} + +__EXTERN_INLINE void __iomem *cia_bwx_ioremap(unsigned long addr, + unsigned long size) +{ + return (void __iomem *)(addr + CIA_BW_MEM); +} + +__EXTERN_INLINE int cia_bwx_is_ioaddr(unsigned long addr) +{ + return addr >= IDENT_ADDR + 0x8000000000UL; +} + +__EXTERN_INLINE int cia_bwx_is_mmio(const volatile void __iomem *addr) +{ + return (unsigned long)addr < CIA_BW_IO; +} + +#undef vip +#undef vuip +#undef vulp + +#undef __IO_PREFIX +#define __IO_PREFIX cia +#define cia_trivial_rw_bw 2 +#define cia_trivial_rw_lq 1 +#define cia_trivial_io_bw 0 +#define cia_trivial_io_lq 0 +#define cia_trivial_iounmap 1 +#include <asm/io_trivial.h> + +#undef __IO_PREFIX +#define __IO_PREFIX cia_bwx +#define cia_bwx_trivial_rw_bw 1 +#define cia_bwx_trivial_rw_lq 1 +#define cia_bwx_trivial_io_bw 1 +#define cia_bwx_trivial_io_lq 1 +#define cia_bwx_trivial_iounmap 1 +#include <asm/io_trivial.h> + +#undef __IO_PREFIX +#ifdef CONFIG_ALPHA_PYXIS +#define __IO_PREFIX cia_bwx +#else +#define __IO_PREFIX cia +#endif + +#ifdef __IO_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_CIA__H__ */ diff --git a/arch/alpha/include/asm/core_irongate.h b/arch/alpha/include/asm/core_irongate.h new file mode 100644 index 000000000000..24b2db541501 --- /dev/null +++ b/arch/alpha/include/asm/core_irongate.h @@ -0,0 +1,232 @@ +#ifndef __ALPHA_IRONGATE__H__ +#define __ALPHA_IRONGATE__H__ + +#include <linux/types.h> +#include <asm/compiler.h> + +/* + * IRONGATE is the internal name for the AMD-751 K7 core logic chipset + * which provides memory controller and PCI access for NAUTILUS-based + * EV6 (21264) systems. + * + * This file is based on: + * + * IronGate management library, (c) 1999 Alpha Processor, Inc. + * Copyright (C) 1999 Alpha Processor, Inc., + * (David Daniel, Stig Telfer, Soohoon Lee) + */ + +/* + * The 21264 supports, and internally recognizes, a 44-bit physical + * address space that is divided equally between memory address space + * and I/O address space. Memory address space resides in the lower + * half of the physical address space (PA[43]=0) and I/O address space + * resides in the upper half of the physical address space (PA[43]=1). + */ + +/* + * Irongate CSR map. Some of the CSRs are 8 or 16 bits, but all access + * through the routines given is 32-bit. + * + * The first 0x40 bytes are standard as per the PCI spec. + */ + +typedef volatile __u32 igcsr32; + +typedef struct { + igcsr32 dev_vendor; /* 0x00 - device ID, vendor ID */ + igcsr32 stat_cmd; /* 0x04 - status, command */ + igcsr32 class; /* 0x08 - class code, rev ID */ + igcsr32 latency; /* 0x0C - header type, PCI latency */ + igcsr32 bar0; /* 0x10 - BAR0 - AGP */ + igcsr32 bar1; /* 0x14 - BAR1 - GART */ + igcsr32 bar2; /* 0x18 - Power Management reg block */ + + igcsr32 rsrvd0[6]; /* 0x1C-0x33 reserved */ + + igcsr32 capptr; /* 0x34 - Capabilities pointer */ + + igcsr32 rsrvd1[2]; /* 0x38-0x3F reserved */ + + igcsr32 bacsr10; /* 0x40 - base address chip selects */ + igcsr32 bacsr32; /* 0x44 - base address chip selects */ + igcsr32 bacsr54_eccms761; /* 0x48 - 751: base addr. chip selects + 761: ECC, mode/status */ + + igcsr32 rsrvd2[1]; /* 0x4C-0x4F reserved */ + + igcsr32 drammap; /* 0x50 - address mapping control */ + igcsr32 dramtm; /* 0x54 - timing, driver strength */ + igcsr32 dramms; /* 0x58 - DRAM mode/status */ + + igcsr32 rsrvd3[1]; /* 0x5C-0x5F reserved */ + + igcsr32 biu0; /* 0x60 - bus interface unit */ + igcsr32 biusip; /* 0x64 - Serial initialisation pkt */ + + igcsr32 rsrvd4[2]; /* 0x68-0x6F reserved */ + + igcsr32 mro; /* 0x70 - memory request optimiser */ + + igcsr32 rsrvd5[3]; /* 0x74-0x7F reserved */ + + igcsr32 whami; /* 0x80 - who am I */ + igcsr32 pciarb; /* 0x84 - PCI arbitration control */ + igcsr32 pcicfg; /* 0x88 - PCI config status */ + + igcsr32 rsrvd6[4]; /* 0x8C-0x9B reserved */ + + igcsr32 pci_mem; /* 0x9C - PCI top of memory, + 761 only */ + + /* AGP (bus 1) control registers */ + igcsr32 agpcap; /* 0xA0 - AGP Capability Identifier */ + igcsr32 agpstat; /* 0xA4 - AGP status register */ + igcsr32 agpcmd; /* 0xA8 - AGP control register */ + igcsr32 agpva; /* 0xAC - AGP Virtual Address Space */ + igcsr32 agpmode; /* 0xB0 - AGP/GART mode control */ +} Irongate0; + + +typedef struct { + + igcsr32 dev_vendor; /* 0x00 - Device and Vendor IDs */ + igcsr32 stat_cmd; /* 0x04 - Status and Command regs */ + igcsr32 class; /* 0x08 - subclass, baseclass etc */ + igcsr32 htype; /* 0x0C - header type (at 0x0E) */ + igcsr32 rsrvd0[2]; /* 0x10-0x17 reserved */ + igcsr32 busnos; /* 0x18 - Primary, secondary bus nos */ + igcsr32 io_baselim_regs; /* 0x1C - IO base, IO lim, AGP status */ + igcsr32 mem_baselim; /* 0x20 - memory base, memory lim */ + igcsr32 pfmem_baselim; /* 0x24 - prefetchable base, lim */ + igcsr32 rsrvd1[2]; /* 0x28-0x2F reserved */ + igcsr32 io_baselim; /* 0x30 - IO base, IO limit */ + igcsr32 rsrvd2[2]; /* 0x34-0x3B - reserved */ + igcsr32 interrupt; /* 0x3C - interrupt, PCI bridge ctrl */ + +} Irongate1; + +extern igcsr32 *IronECC; + +/* + * Memory spaces: + */ + +/* Irongate is consistent with a subset of the Tsunami memory map */ +#ifdef USE_48_BIT_KSEG +#define IRONGATE_BIAS 0x80000000000UL +#else +#define IRONGATE_BIAS 0x10000000000UL +#endif + + +#define IRONGATE_MEM (IDENT_ADDR | IRONGATE_BIAS | 0x000000000UL) +#define IRONGATE_IACK_SC (IDENT_ADDR | IRONGATE_BIAS | 0x1F8000000UL) +#define IRONGATE_IO (IDENT_ADDR | IRONGATE_BIAS | 0x1FC000000UL) +#define IRONGATE_CONF (IDENT_ADDR | IRONGATE_BIAS | 0x1FE000000UL) + +/* + * PCI Configuration space accesses are formed like so: + * + * 0x1FE << 24 | : 2 2 2 2 1 1 1 1 : 1 1 1 1 1 1 0 0 : 0 0 0 0 0 0 0 0 : + * : 3 2 1 0 9 8 7 6 : 5 4 3 2 1 0 9 8 : 7 6 5 4 3 2 1 0 : + * ---bus numer--- -device-- -fun- ---register---- + */ + +#define IGCSR(dev,fun,reg) ( IRONGATE_CONF | \ + ((dev)<<11) | \ + ((fun)<<8) | \ + (reg) ) + +#define IRONGATE0 ((Irongate0 *) IGCSR(0, 0, 0)) +#define IRONGATE1 ((Irongate1 *) IGCSR(1, 0, 0)) + +/* + * Data structure for handling IRONGATE machine checks: + * This is the standard OSF logout frame + */ + +#define SCB_Q_SYSERR 0x620 /* OSF definitions */ +#define SCB_Q_PROCERR 0x630 +#define SCB_Q_SYSMCHK 0x660 +#define SCB_Q_PROCMCHK 0x670 + +struct el_IRONGATE_sysdata_mcheck { + __u32 FrameSize; /* Bytes, including this field */ + __u32 FrameFlags; /* <31> = Retry, <30> = Second Error */ + __u32 CpuOffset; /* Offset to CPU-specific into */ + __u32 SystemOffset; /* Offset to system-specific info */ + __u32 MCHK_Code; + __u32 MCHK_Frame_Rev; + __u64 I_STAT; + __u64 DC_STAT; + __u64 C_ADDR; + __u64 DC1_SYNDROME; + __u64 DC0_SYNDROME; + __u64 C_STAT; + __u64 C_STS; + __u64 RESERVED0; + __u64 EXC_ADDR; + __u64 IER_CM; + __u64 ISUM; + __u64 MM_STAT; + __u64 PAL_BASE; + __u64 I_CTL; + __u64 PCTX; +}; + + +#ifdef __KERNEL__ + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __IO_EXTERN_INLINE +#endif + +/* + * I/O functions: + * + * IRONGATE (AMD-751) PCI/memory support chip for the EV6 (21264) and + * K7 can only use linear accesses to get at PCI memory and I/O spaces. + */ + +/* + * Memory functions. All accesses are done through linear space. + */ + +__EXTERN_INLINE void __iomem *irongate_ioportmap(unsigned long addr) +{ + return (void __iomem *)(addr + IRONGATE_IO); +} + +extern void __iomem *irongate_ioremap(unsigned long addr, unsigned long size); +extern void irongate_iounmap(volatile void __iomem *addr); + +__EXTERN_INLINE int irongate_is_ioaddr(unsigned long addr) +{ + return addr >= IRONGATE_MEM; +} + +__EXTERN_INLINE int irongate_is_mmio(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long)xaddr; + return addr < IRONGATE_IO || addr >= IRONGATE_CONF; +} + +#undef __IO_PREFIX +#define __IO_PREFIX irongate +#define irongate_trivial_rw_bw 1 +#define irongate_trivial_rw_lq 1 +#define irongate_trivial_io_bw 1 +#define irongate_trivial_io_lq 1 +#define irongate_trivial_iounmap 0 +#include <asm/io_trivial.h> + +#ifdef __IO_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_IRONGATE__H__ */ diff --git a/arch/alpha/include/asm/core_lca.h b/arch/alpha/include/asm/core_lca.h new file mode 100644 index 000000000000..f7cb4b460954 --- /dev/null +++ b/arch/alpha/include/asm/core_lca.h @@ -0,0 +1,361 @@ +#ifndef __ALPHA_LCA__H__ +#define __ALPHA_LCA__H__ + +#include <asm/system.h> +#include <asm/compiler.h> + +/* + * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068, + * for example). + * + * This file is based on: + * + * DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors + * Hardware Reference Manual; Digital Equipment Corp.; May 1994; + * Maynard, MA; Order Number: EC-N2681-71. + */ + +/* + * NOTE: The LCA uses a Host Address Extension (HAE) register to access + * PCI addresses that are beyond the first 27 bits of address + * space. Updating the HAE requires an external cycle (and + * a memory barrier), which tends to be slow. Instead of updating + * it on each sparse memory access, we keep the current HAE value + * cached in variable cache_hae. Only if the cached HAE differs + * from the desired HAE value do we actually updated HAE register. + * The HAE register is preserved by the interrupt handler entry/exit + * code, so this scheme works even in the presence of interrupts. + * + * Dense memory space doesn't require the HAE, but is restricted to + * aligned 32 and 64 bit accesses. Special Cycle and Interrupt + * Acknowledge cycles may also require the use of the HAE. The LCA + * limits I/O address space to the bottom 24 bits of address space, + * but this easily covers the 16 bit ISA I/O address space. + */ + +/* + * NOTE 2! The memory operations do not set any memory barriers, as + * it's not needed for cases like a frame buffer that is essentially + * memory-like. You need to do them by hand if the operations depend + * on ordering. + * + * Similarly, the port I/O operations do a "mb" only after a write + * operation: if an mb is needed before (as in the case of doing + * memory mapped I/O first, and then a port I/O operation to the same + * device), it needs to be done by hand. + * + * After the above has bitten me 100 times, I'll give up and just do + * the mb all the time, but right now I'm hoping this will work out. + * Avoiding mb's may potentially be a noticeable speed improvement, + * but I can't honestly say I've tested it. + * + * Handling interrupts that need to do mb's to synchronize to + * non-interrupts is another fun race area. Don't do it (because if + * you do, I'll have to do *everything* with interrupts disabled, + * ugh). + */ + +/* + * Memory Controller registers: + */ +#define LCA_MEM_BCR0 (IDENT_ADDR + 0x120000000UL) +#define LCA_MEM_BCR1 (IDENT_ADDR + 0x120000008UL) +#define LCA_MEM_BCR2 (IDENT_ADDR + 0x120000010UL) +#define LCA_MEM_BCR3 (IDENT_ADDR + 0x120000018UL) +#define LCA_MEM_BMR0 (IDENT_ADDR + 0x120000020UL) +#define LCA_MEM_BMR1 (IDENT_ADDR + 0x120000028UL) +#define LCA_MEM_BMR2 (IDENT_ADDR + 0x120000030UL) +#define LCA_MEM_BMR3 (IDENT_ADDR + 0x120000038UL) +#define LCA_MEM_BTR0 (IDENT_ADDR + 0x120000040UL) +#define LCA_MEM_BTR1 (IDENT_ADDR + 0x120000048UL) +#define LCA_MEM_BTR2 (IDENT_ADDR + 0x120000050UL) +#define LCA_MEM_BTR3 (IDENT_ADDR + 0x120000058UL) +#define LCA_MEM_GTR (IDENT_ADDR + 0x120000060UL) +#define LCA_MEM_ESR (IDENT_ADDR + 0x120000068UL) +#define LCA_MEM_EAR (IDENT_ADDR + 0x120000070UL) +#define LCA_MEM_CAR (IDENT_ADDR + 0x120000078UL) +#define LCA_MEM_VGR (IDENT_ADDR + 0x120000080UL) +#define LCA_MEM_PLM (IDENT_ADDR + 0x120000088UL) +#define LCA_MEM_FOR (IDENT_ADDR + 0x120000090UL) + +/* + * I/O Controller registers: + */ +#define LCA_IOC_HAE (IDENT_ADDR + 0x180000000UL) +#define LCA_IOC_CONF (IDENT_ADDR + 0x180000020UL) +#define LCA_IOC_STAT0 (IDENT_ADDR + 0x180000040UL) +#define LCA_IOC_STAT1 (IDENT_ADDR + 0x180000060UL) +#define LCA_IOC_TBIA (IDENT_ADDR + 0x180000080UL) +#define LCA_IOC_TB_ENA (IDENT_ADDR + 0x1800000a0UL) +#define LCA_IOC_SFT_RST (IDENT_ADDR + 0x1800000c0UL) +#define LCA_IOC_PAR_DIS (IDENT_ADDR + 0x1800000e0UL) +#define LCA_IOC_W_BASE0 (IDENT_ADDR + 0x180000100UL) +#define LCA_IOC_W_BASE1 (IDENT_ADDR + 0x180000120UL) +#define LCA_IOC_W_MASK0 (IDENT_ADDR + 0x180000140UL) +#define LCA_IOC_W_MASK1 (IDENT_ADDR + 0x180000160UL) +#define LCA_IOC_T_BASE0 (IDENT_ADDR + 0x180000180UL) +#define LCA_IOC_T_BASE1 (IDENT_ADDR + 0x1800001a0UL) +#define LCA_IOC_TB_TAG0 (IDENT_ADDR + 0x188000000UL) +#define LCA_IOC_TB_TAG1 (IDENT_ADDR + 0x188000020UL) +#define LCA_IOC_TB_TAG2 (IDENT_ADDR + 0x188000040UL) +#define LCA_IOC_TB_TAG3 (IDENT_ADDR + 0x188000060UL) +#define LCA_IOC_TB_TAG4 (IDENT_ADDR + 0x188000070UL) +#define LCA_IOC_TB_TAG5 (IDENT_ADDR + 0x1880000a0UL) +#define LCA_IOC_TB_TAG6 (IDENT_ADDR + 0x1880000c0UL) +#define LCA_IOC_TB_TAG7 (IDENT_ADDR + 0x1880000e0UL) + +/* + * Memory spaces: + */ +#define LCA_IACK_SC (IDENT_ADDR + 0x1a0000000UL) +#define LCA_CONF (IDENT_ADDR + 0x1e0000000UL) +#define LCA_IO (IDENT_ADDR + 0x1c0000000UL) +#define LCA_SPARSE_MEM (IDENT_ADDR + 0x200000000UL) +#define LCA_DENSE_MEM (IDENT_ADDR + 0x300000000UL) + +/* + * Bit definitions for I/O Controller status register 0: + */ +#define LCA_IOC_STAT0_CMD 0xf +#define LCA_IOC_STAT0_ERR (1<<4) +#define LCA_IOC_STAT0_LOST (1<<5) +#define LCA_IOC_STAT0_THIT (1<<6) +#define LCA_IOC_STAT0_TREF (1<<7) +#define LCA_IOC_STAT0_CODE_SHIFT 8 +#define LCA_IOC_STAT0_CODE_MASK 0x7 +#define LCA_IOC_STAT0_P_NBR_SHIFT 13 +#define LCA_IOC_STAT0_P_NBR_MASK 0x7ffff + +#define LCA_HAE_ADDRESS LCA_IOC_HAE + +/* LCA PMR Power Management register defines */ +#define LCA_PMR_ADDR (IDENT_ADDR + 0x120000098UL) +#define LCA_PMR_PDIV 0x7 /* Primary clock divisor */ +#define LCA_PMR_ODIV 0x38 /* Override clock divisor */ +#define LCA_PMR_INTO 0x40 /* Interrupt override */ +#define LCA_PMR_DMAO 0x80 /* DMA override */ +#define LCA_PMR_OCCEB 0xffff0000L /* Override cycle counter - even bits */ +#define LCA_PMR_OCCOB 0xffff000000000000L /* Override cycle counter - even bits */ +#define LCA_PMR_PRIMARY_MASK 0xfffffffffffffff8L + +/* LCA PMR Macros */ + +#define LCA_READ_PMR (*(volatile unsigned long *)LCA_PMR_ADDR) +#define LCA_WRITE_PMR(d) (*((volatile unsigned long *)LCA_PMR_ADDR) = (d)) + +#define LCA_GET_PRIMARY(r) ((r) & LCA_PMR_PDIV) +#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV) +#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c))) + +/* LCA PMR Divisor values */ +#define LCA_PMR_DIV_1 0x0 +#define LCA_PMR_DIV_1_5 0x1 +#define LCA_PMR_DIV_2 0x2 +#define LCA_PMR_DIV_4 0x3 +#define LCA_PMR_DIV_8 0x4 +#define LCA_PMR_DIV_16 0x5 +#define LCA_PMR_DIV_MIN DIV_1 +#define LCA_PMR_DIV_MAX DIV_16 + + +/* + * Data structure for handling LCA machine checks. Correctable errors + * result in a short logout frame, uncorrectable ones in a long one. + */ +struct el_lca_mcheck_short { + struct el_common h; /* common logout header */ + unsigned long esr; /* error-status register */ + unsigned long ear; /* error-address register */ + unsigned long dc_stat; /* dcache status register */ + unsigned long ioc_stat0; /* I/O controller status register 0 */ + unsigned long ioc_stat1; /* I/O controller status register 1 */ +}; + +struct el_lca_mcheck_long { + struct el_common h; /* common logout header */ + unsigned long pt[31]; /* PAL temps */ + unsigned long exc_addr; /* exception address */ + unsigned long pad1[3]; + unsigned long pal_base; /* PALcode base address */ + unsigned long hier; /* hw interrupt enable */ + unsigned long hirr; /* hw interrupt request */ + unsigned long mm_csr; /* MMU control & status */ + unsigned long dc_stat; /* data cache status */ + unsigned long dc_addr; /* data cache addr register */ + unsigned long abox_ctl; /* address box control register */ + unsigned long esr; /* error status register */ + unsigned long ear; /* error address register */ + unsigned long car; /* cache control register */ + unsigned long ioc_stat0; /* I/O controller status register 0 */ + unsigned long ioc_stat1; /* I/O controller status register 1 */ + unsigned long va; /* virtual address register */ +}; + +union el_lca { + struct el_common * c; + struct el_lca_mcheck_long * l; + struct el_lca_mcheck_short * s; +}; + +#ifdef __KERNEL__ + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __IO_EXTERN_INLINE +#endif + +/* + * I/O functions: + * + * Unlike Jensen, the Noname machines have no concept of local + * I/O---everything goes over the PCI bus. + * + * There is plenty room for optimization here. In particular, + * the Alpha's insb/insw/extb/extw should be useful in moving + * data to/from the right byte-lanes. + */ + +#define vip volatile int __force * +#define vuip volatile unsigned int __force * +#define vulp volatile unsigned long __force * + +#define LCA_SET_HAE \ + do { \ + if (addr >= (1UL << 24)) { \ + unsigned long msb = addr & 0xf8000000; \ + addr -= msb; \ + set_hae(msb); \ + } \ + } while (0) + + +__EXTERN_INLINE unsigned int lca_ioread8(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long result, base_and_type; + + if (addr >= LCA_DENSE_MEM) { + addr -= LCA_DENSE_MEM; + LCA_SET_HAE; + base_and_type = LCA_SPARSE_MEM + 0x00; + } else { + addr -= LCA_IO; + base_and_type = LCA_IO + 0x00; + } + + result = *(vip) ((addr << 5) + base_and_type); + return __kernel_extbl(result, addr & 3); +} + +__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long w, base_and_type; + + if (addr >= LCA_DENSE_MEM) { + addr -= LCA_DENSE_MEM; + LCA_SET_HAE; + base_and_type = LCA_SPARSE_MEM + 0x00; + } else { + addr -= LCA_IO; + base_and_type = LCA_IO + 0x00; + } + + w = __kernel_insbl(b, addr & 3); + *(vuip) ((addr << 5) + base_and_type) = w; +} + +__EXTERN_INLINE unsigned int lca_ioread16(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long result, base_and_type; + + if (addr >= LCA_DENSE_MEM) { + addr -= LCA_DENSE_MEM; + LCA_SET_HAE; + base_and_type = LCA_SPARSE_MEM + 0x08; + } else { + addr -= LCA_IO; + base_and_type = LCA_IO + 0x08; + } + + result = *(vip) ((addr << 5) + base_and_type); + return __kernel_extwl(result, addr & 3); +} + +__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long w, base_and_type; + + if (addr >= LCA_DENSE_MEM) { + addr -= LCA_DENSE_MEM; + LCA_SET_HAE; + base_and_type = LCA_SPARSE_MEM + 0x08; + } else { + addr -= LCA_IO; + base_and_type = LCA_IO + 0x08; + } + + w = __kernel_inswl(b, addr & 3); + *(vuip) ((addr << 5) + base_and_type) = w; +} + +__EXTERN_INLINE unsigned int lca_ioread32(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < LCA_DENSE_MEM) + addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18; + return *(vuip)addr; +} + +__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < LCA_DENSE_MEM) + addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18; + *(vuip)addr = b; +} + +__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr) +{ + return (void __iomem *)(addr + LCA_IO); +} + +__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr, + unsigned long size) +{ + return (void __iomem *)(addr + LCA_DENSE_MEM); +} + +__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr) +{ + return addr >= IDENT_ADDR + 0x120000000UL; +} + +__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= LCA_DENSE_MEM; +} + +#undef vip +#undef vuip +#undef vulp + +#undef __IO_PREFIX +#define __IO_PREFIX lca +#define lca_trivial_rw_bw 2 +#define lca_trivial_rw_lq 1 +#define lca_trivial_io_bw 0 +#define lca_trivial_io_lq 0 +#define lca_trivial_iounmap 1 +#include <asm/io_trivial.h> + +#ifdef __IO_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_LCA__H__ */ diff --git a/arch/alpha/include/asm/core_marvel.h b/arch/alpha/include/asm/core_marvel.h new file mode 100644 index 000000000000..30d55fe7aaf6 --- /dev/null +++ b/arch/alpha/include/asm/core_marvel.h @@ -0,0 +1,378 @@ +/* + * Marvel systems use the IO7 I/O chip provides PCI/PCIX/AGP access + * + * This file is based on: + * + * Marvel / EV7 System Programmer's Manual + * Revision 1.00 + * 14 May 2001 + */ + +#ifndef __ALPHA_MARVEL__H__ +#define __ALPHA_MARVEL__H__ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/spinlock.h> + +#include <asm/compiler.h> + +#define MARVEL_MAX_PIDS 32 /* as long as we rely on 43-bit superpage */ +#define MARVEL_IRQ_VEC_PE_SHIFT (10) +#define MARVEL_IRQ_VEC_IRQ_MASK ((1 << MARVEL_IRQ_VEC_PE_SHIFT) - 1) +#define MARVEL_NR_IRQS \ + (16 + (MARVEL_MAX_PIDS * (1 << MARVEL_IRQ_VEC_PE_SHIFT))) + +/* + * EV7 RBOX Registers + */ +typedef struct { + volatile unsigned long csr __attribute__((aligned(16))); +} ev7_csr; + +typedef struct { + ev7_csr RBOX_CFG; /* 0x0000 */ + ev7_csr RBOX_NSVC; + ev7_csr RBOX_EWVC; + ev7_csr RBOX_WHAMI; + ev7_csr RBOX_TCTL; /* 0x0040 */ + ev7_csr RBOX_INT; + ev7_csr RBOX_IMASK; + ev7_csr RBOX_IREQ; + ev7_csr RBOX_INTQ; /* 0x0080 */ + ev7_csr RBOX_INTA; + ev7_csr RBOX_IT; + ev7_csr RBOX_SCRATCH1; + ev7_csr RBOX_SCRATCH2; /* 0x00c0 */ + ev7_csr RBOX_L_ERR; +} ev7_csrs; + +/* + * EV7 CSR addressing macros + */ +#define EV7_MASK40(addr) ((addr) & ((1UL << 41) - 1)) +#define EV7_KERN_ADDR(addr) ((void *)(IDENT_ADDR | EV7_MASK40(addr))) + +#define EV7_PE_MASK 0x1ffUL /* 9 bits ( 256 + mem/io ) */ +#define EV7_IPE(pe) ((~((long)(pe)) & EV7_PE_MASK) << 35) + +#define EV7_CSR_PHYS(pe, off) (EV7_IPE(pe) | (0x7FFCUL << 20) | (off)) +#define EV7_CSRS_PHYS(pe) (EV7_CSR_PHYS(pe, 0UL)) + +#define EV7_CSR_KERN(pe, off) (EV7_KERN_ADDR(EV7_CSR_PHYS(pe, off))) +#define EV7_CSRS_KERN(pe) (EV7_KERN_ADDR(EV7_CSRS_PHYS(pe))) + +#define EV7_CSR_OFFSET(name) ((unsigned long)&((ev7_csrs *)NULL)->name.csr) + +/* + * IO7 registers + */ +typedef struct { + volatile unsigned long csr __attribute__((aligned(64))); +} io7_csr; + +typedef struct { + /* I/O Port Control Registers */ + io7_csr POx_CTRL; /* 0x0000 */ + io7_csr POx_CACHE_CTL; + io7_csr POx_TIMER; + io7_csr POx_IO_ADR_EXT; + io7_csr POx_MEM_ADR_EXT; /* 0x0100 */ + io7_csr POx_XCAL_CTRL; + io7_csr rsvd1[2]; /* ?? spec doesn't show 0x180 */ + io7_csr POx_DM_SOURCE; /* 0x0200 */ + io7_csr POx_DM_DEST; + io7_csr POx_DM_SIZE; + io7_csr POx_DM_CTRL; + io7_csr rsvd2[4]; /* 0x0300 */ + + /* AGP Control Registers -- port 3 only */ + io7_csr AGP_CAP_ID; /* 0x0400 */ + io7_csr AGP_STAT; + io7_csr AGP_CMD; + io7_csr rsvd3; + + /* I/O Port Monitor Registers */ + io7_csr POx_MONCTL; /* 0x0500 */ + io7_csr POx_CTRA; + io7_csr POx_CTRB; + io7_csr POx_CTR56; + io7_csr POx_SCRATCH; /* 0x0600 */ + io7_csr POx_XTRA_A; + io7_csr POx_XTRA_TS; + io7_csr POx_XTRA_Z; + io7_csr rsvd4; /* 0x0700 */ + io7_csr POx_THRESHA; + io7_csr POx_THRESHB; + io7_csr rsvd5[33]; + + /* System Address Space Window Control Registers */ + + io7_csr POx_WBASE[4]; /* 0x1000 */ + io7_csr POx_WMASK[4]; + io7_csr POx_TBASE[4]; + io7_csr POx_SG_TBIA; + io7_csr POx_MSI_WBASE; + io7_csr rsvd6[50]; + + /* I/O Port Error Registers */ + io7_csr POx_ERR_SUM; + io7_csr POx_FIRST_ERR; + io7_csr POx_MSK_HEI; + io7_csr POx_TLB_ERR; + io7_csr POx_SPL_COMPLT; + io7_csr POx_TRANS_SUM; + io7_csr POx_FRC_PCI_ERR; + io7_csr POx_MULT_ERR; + io7_csr rsvd7[8]; + + /* I/O Port End of Interrupt Registers */ + io7_csr EOI_DAT; + io7_csr rsvd8[7]; + io7_csr POx_IACK_SPECIAL; + io7_csr rsvd9[103]; +} io7_ioport_csrs; + +typedef struct { + io7_csr IO_ASIC_REV; /* 0x30.0000 */ + io7_csr IO_SYS_REV; + io7_csr SER_CHAIN3; + io7_csr PO7_RST1; + io7_csr PO7_RST2; /* 0x30.0100 */ + io7_csr POx_RST[4]; + io7_csr IO7_DWNH; + io7_csr IO7_MAF; + io7_csr IO7_MAF_TO; + io7_csr IO7_ACC_CLUMP; /* 0x30.0300 */ + io7_csr IO7_PMASK; + io7_csr IO7_IOMASK; + io7_csr IO7_UPH; + io7_csr IO7_UPH_TO; /* 0x30.0400 */ + io7_csr RBX_IREQ_OFF; + io7_csr RBX_INTA_OFF; + io7_csr INT_RTY; + io7_csr PO7_MONCTL; /* 0x30.0500 */ + io7_csr PO7_CTRA; + io7_csr PO7_CTRB; + io7_csr PO7_CTR56; + io7_csr PO7_SCRATCH; /* 0x30.0600 */ + io7_csr PO7_XTRA_A; + io7_csr PO7_XTRA_TS; + io7_csr PO7_XTRA_Z; + io7_csr PO7_PMASK; /* 0x30.0700 */ + io7_csr PO7_THRESHA; + io7_csr PO7_THRESHB; + io7_csr rsvd1[97]; + io7_csr PO7_ERROR_SUM; /* 0x30.2000 */ + io7_csr PO7_BHOLE_MASK; + io7_csr PO7_HEI_MSK; + io7_csr PO7_CRD_MSK; + io7_csr PO7_UNCRR_SYM; /* 0x30.2100 */ + io7_csr PO7_CRRCT_SYM; + io7_csr PO7_ERR_PKT[2]; + io7_csr PO7_UGBGE_SYM; /* 0x30.2200 */ + io7_csr rsbv2[887]; + io7_csr PO7_LSI_CTL[128]; /* 0x31.0000 */ + io7_csr rsvd3[123]; + io7_csr HLT_CTL; /* 0x31.3ec0 */ + io7_csr HPI_CTL; /* 0x31.3f00 */ + io7_csr CRD_CTL; + io7_csr STV_CTL; + io7_csr HEI_CTL; + io7_csr PO7_MSI_CTL[16]; /* 0x31.4000 */ + io7_csr rsvd4[240]; + + /* + * Interrupt Diagnostic / Test + */ + struct { + io7_csr INT_PND; + io7_csr INT_CLR; + io7_csr INT_EOI; + io7_csr rsvd[29]; + } INT_DIAG[4]; + io7_csr rsvd5[125]; /* 0x31.a000 */ + io7_csr MISC_PND; /* 0x31.b800 */ + io7_csr rsvd6[31]; + io7_csr MSI_PND[16]; /* 0x31.c000 */ + io7_csr rsvd7[16]; + io7_csr MSI_CLR[16]; /* 0x31.c800 */ +} io7_port7_csrs; + +/* + * IO7 DMA Window Base register (POx_WBASEx) + */ +#define wbase_m_ena 0x1 +#define wbase_m_sg 0x2 +#define wbase_m_dac 0x4 +#define wbase_m_addr 0xFFF00000 +union IO7_POx_WBASE { + struct { + unsigned ena : 1; /* <0> */ + unsigned sg : 1; /* <1> */ + unsigned dac : 1; /* <2> -- window 3 only */ + unsigned rsvd1 : 17; + unsigned addr : 12; /* <31:20> */ + unsigned rsvd2 : 32; + } bits; + unsigned as_long[2]; + unsigned as_quad; +}; + +/* + * IO7 IID (Interrupt IDentifier) format + * + * For level-sensative interrupts, int_num is encoded as: + * + * bus/port slot/device INTx + * <7:5> <4:2> <1:0> + */ +union IO7_IID { + struct { + unsigned int_num : 9; /* <8:0> */ + unsigned tpu_mask : 4; /* <12:9> rsvd */ + unsigned msi : 1; /* 13 */ + unsigned ipe : 10; /* <23:14> */ + unsigned long rsvd : 40; + } bits; + unsigned int as_long[2]; + unsigned long as_quad; +}; + +/* + * IO7 addressing macros + */ +#define IO7_KERN_ADDR(addr) (EV7_KERN_ADDR(addr)) + +#define IO7_PORT_MASK 0x07UL /* 3 bits of port */ + +#define IO7_IPE(pe) (EV7_IPE(pe)) +#define IO7_IPORT(port) ((~((long)(port)) & IO7_PORT_MASK) << 32) + +#define IO7_HOSE(pe, port) (IO7_IPE(pe) | IO7_IPORT(port)) + +#define IO7_MEM_PHYS(pe, port) (IO7_HOSE(pe, port) | 0x00000000UL) +#define IO7_CONF_PHYS(pe, port) (IO7_HOSE(pe, port) | 0xFE000000UL) +#define IO7_IO_PHYS(pe, port) (IO7_HOSE(pe, port) | 0xFF000000UL) +#define IO7_CSR_PHYS(pe, port, off) \ + (IO7_HOSE(pe, port) | 0xFF800000UL | (off)) +#define IO7_CSRS_PHYS(pe, port) (IO7_CSR_PHYS(pe, port, 0UL)) +#define IO7_PORT7_CSRS_PHYS(pe) (IO7_CSR_PHYS(pe, 7, 0x300000UL)) + +#define IO7_MEM_KERN(pe, port) (IO7_KERN_ADDR(IO7_MEM_PHYS(pe, port))) +#define IO7_CONF_KERN(pe, port) (IO7_KERN_ADDR(IO7_CONF_PHYS(pe, port))) +#define IO7_IO_KERN(pe, port) (IO7_KERN_ADDR(IO7_IO_PHYS(pe, port))) +#define IO7_CSR_KERN(pe, port, off) (IO7_KERN_ADDR(IO7_CSR_PHYS(pe,port,off))) +#define IO7_CSRS_KERN(pe, port) (IO7_KERN_ADDR(IO7_CSRS_PHYS(pe, port))) +#define IO7_PORT7_CSRS_KERN(pe) (IO7_KERN_ADDR(IO7_PORT7_CSRS_PHYS(pe))) + +#define IO7_PLL_RNGA(pll) (((pll) >> 3) & 0x7) +#define IO7_PLL_RNGB(pll) (((pll) >> 6) & 0x7) + +#define IO7_MEM_SPACE (2UL * 1024 * 1024 * 1024) /* 2GB MEM */ +#define IO7_IO_SPACE (8UL * 1024 * 1024) /* 8MB I/O */ + + +/* + * Offset between ram physical addresses and pci64 DAC addresses + */ +#define IO7_DAC_OFFSET (1UL << 49) + +/* + * This is needed to satisify the IO() macro used in initializing the machvec + */ +#define MARVEL_IACK_SC \ + ((unsigned long) \ + (&(((io7_ioport_csrs *)IO7_CSRS_KERN(0, 0))->POx_IACK_SPECIAL))) + +#ifdef __KERNEL__ + +/* + * IO7 structs + */ +#define IO7_NUM_PORTS 4 +#define IO7_AGP_PORT 3 + +struct io7_port { + struct io7 *io7; + struct pci_controller *hose; + + int enabled; + unsigned int port; + io7_ioport_csrs *csrs; + + unsigned long saved_wbase[4]; + unsigned long saved_wmask[4]; + unsigned long saved_tbase[4]; +}; + +struct io7 { + struct io7 *next; + + unsigned int pe; + io7_port7_csrs *csrs; + struct io7_port ports[IO7_NUM_PORTS]; + + spinlock_t irq_lock; +}; + +#ifndef __EXTERN_INLINE +# define __EXTERN_INLINE extern inline +# define __IO_EXTERN_INLINE +#endif + +/* + * I/O functions. All access through linear space. + */ + +/* + * Memory functions. All accesses through linear space. + */ + +#define vucp volatile unsigned char __force * +#define vusp volatile unsigned short __force * + +extern unsigned int marvel_ioread8(void __iomem *); +extern void marvel_iowrite8(u8 b, void __iomem *); + +__EXTERN_INLINE unsigned int marvel_ioread16(void __iomem *addr) +{ + return __kernel_ldwu(*(vusp)addr); +} + +__EXTERN_INLINE void marvel_iowrite16(u16 b, void __iomem *addr) +{ + __kernel_stw(b, *(vusp)addr); +} + +extern void __iomem *marvel_ioremap(unsigned long addr, unsigned long size); +extern void marvel_iounmap(volatile void __iomem *addr); +extern void __iomem *marvel_ioportmap (unsigned long addr); + +__EXTERN_INLINE int marvel_is_ioaddr(unsigned long addr) +{ + return (addr >> 40) & 1; +} + +extern int marvel_is_mmio(const volatile void __iomem *); + +#undef vucp +#undef vusp + +#undef __IO_PREFIX +#define __IO_PREFIX marvel +#define marvel_trivial_rw_bw 1 +#define marvel_trivial_rw_lq 1 +#define marvel_trivial_io_bw 0 +#define marvel_trivial_io_lq 1 +#define marvel_trivial_iounmap 0 +#include <asm/io_trivial.h> + +#ifdef __IO_EXTERN_INLINE +# undef __EXTERN_INLINE +# undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_MARVEL__H__ */ diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h new file mode 100644 index 000000000000..acf55b483472 --- /dev/null +++ b/arch/alpha/include/asm/core_mcpcia.h @@ -0,0 +1,381 @@ +#ifndef __ALPHA_MCPCIA__H__ +#define __ALPHA_MCPCIA__H__ + +/* Define to experiment with fitting everything into one 128MB HAE window. + One window per bus, that is. */ +#define MCPCIA_ONE_HAE_WINDOW 1 + +#include <linux/types.h> +#include <linux/pci.h> +#include <asm/compiler.h> + +/* + * MCPCIA is the internal name for a core logic chipset which provides + * PCI access for the RAWHIDE family of systems. + * + * This file is based on: + * + * RAWHIDE System Programmer's Manual + * 16-May-96 + * Rev. 1.4 + * + */ + +/*------------------------------------------------------------------------** +** ** +** I/O procedures ** +** ** +** inport[b|w|t|l], outport[b|w|t|l] 8:16:24:32 IO xfers ** +** inportbxt: 8 bits only ** +** inport: alias of inportw ** +** outport: alias of outportw ** +** ** +** inmem[b|w|t|l], outmem[b|w|t|l] 8:16:24:32 ISA memory xfers ** +** inmembxt: 8 bits only ** +** inmem: alias of inmemw ** +** outmem: alias of outmemw ** +** ** +**------------------------------------------------------------------------*/ + + +/* MCPCIA ADDRESS BIT DEFINITIONS + * + * 3333 3333 3322 2222 2222 1111 1111 11 + * 9876 5432 1098 7654 3210 9876 5432 1098 7654 3210 + * ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- + * 1 000 + * ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- + * | |\| + * | Byte Enable --+ | + * | Transfer Length --+ + * +-- IO space, not cached + * + * Byte Transfer + * Enable Length Transfer Byte Address + * adr<6:5> adr<4:3> Length Enable Adder + * --------------------------------------------- + * 00 00 Byte 1110 0x000 + * 01 00 Byte 1101 0x020 + * 10 00 Byte 1011 0x040 + * 11 00 Byte 0111 0x060 + * + * 00 01 Word 1100 0x008 + * 01 01 Word 1001 0x028 <= Not supported in this code. + * 10 01 Word 0011 0x048 + * + * 00 10 Tribyte 1000 0x010 + * 01 10 Tribyte 0001 0x030 + * + * 10 11 Longword 0000 0x058 + * + * Note that byte enables are asserted low. + * + */ + +#define MCPCIA_MAX_HOSES 4 + +#define MCPCIA_MID(m) ((unsigned long)(m) << 33) + +/* Dodge has PCI0 and PCI1 at MID 4 and 5 respectively. + Durango adds PCI2 and PCI3 at MID 6 and 7 respectively. */ +#define MCPCIA_HOSE2MID(h) ((h) + 4) + +#define MCPCIA_MEM_MASK 0x07ffffff /* SPARSE Mem region mask is 27 bits */ + +/* + * Memory spaces: + */ +#define MCPCIA_SPARSE(m) (IDENT_ADDR + 0xf000000000UL + MCPCIA_MID(m)) +#define MCPCIA_DENSE(m) (IDENT_ADDR + 0xf100000000UL + MCPCIA_MID(m)) +#define MCPCIA_IO(m) (IDENT_ADDR + 0xf180000000UL + MCPCIA_MID(m)) +#define MCPCIA_CONF(m) (IDENT_ADDR + 0xf1c0000000UL + MCPCIA_MID(m)) +#define MCPCIA_CSR(m) (IDENT_ADDR + 0xf1e0000000UL + MCPCIA_MID(m)) +#define MCPCIA_IO_IACK(m) (IDENT_ADDR + 0xf1f0000000UL + MCPCIA_MID(m)) +#define MCPCIA_DENSE_IO(m) (IDENT_ADDR + 0xe1fc000000UL + MCPCIA_MID(m)) +#define MCPCIA_DENSE_CONF(m) (IDENT_ADDR + 0xe1fe000000UL + MCPCIA_MID(m)) + +/* + * General Registers + */ +#define MCPCIA_REV(m) (MCPCIA_CSR(m) + 0x000) +#define MCPCIA_WHOAMI(m) (MCPCIA_CSR(m) + 0x040) +#define MCPCIA_PCI_LAT(m) (MCPCIA_CSR(m) + 0x080) +#define MCPCIA_CAP_CTRL(m) (MCPCIA_CSR(m) + 0x100) +#define MCPCIA_HAE_MEM(m) (MCPCIA_CSR(m) + 0x400) +#define MCPCIA_HAE_IO(m) (MCPCIA_CSR(m) + 0x440) +#define _MCPCIA_IACK_SC(m) (MCPCIA_CSR(m) + 0x480) +#define MCPCIA_HAE_DENSE(m) (MCPCIA_CSR(m) + 0x4C0) + +/* + * Interrupt Control registers + */ +#define MCPCIA_INT_CTL(m) (MCPCIA_CSR(m) + 0x500) +#define MCPCIA_INT_REQ(m) (MCPCIA_CSR(m) + 0x540) +#define MCPCIA_INT_TARG(m) (MCPCIA_CSR(m) + 0x580) +#define MCPCIA_INT_ADR(m) (MCPCIA_CSR(m) + 0x5C0) +#define MCPCIA_INT_ADR_EXT(m) (MCPCIA_CSR(m) + 0x600) +#define MCPCIA_INT_MASK0(m) (MCPCIA_CSR(m) + 0x640) +#define MCPCIA_INT_MASK1(m) (MCPCIA_CSR(m) + 0x680) +#define MCPCIA_INT_ACK0(m) (MCPCIA_CSR(m) + 0x10003f00) +#define MCPCIA_INT_ACK1(m) (MCPCIA_CSR(m) + 0x10003f40) + +/* + * Performance Monitor registers + */ +#define MCPCIA_PERF_MON(m) (MCPCIA_CSR(m) + 0x300) +#define MCPCIA_PERF_CONT(m) (MCPCIA_CSR(m) + 0x340) + +/* + * Diagnostic Registers + */ +#define MCPCIA_CAP_DIAG(m) (MCPCIA_CSR(m) + 0x700) +#define MCPCIA_TOP_OF_MEM(m) (MCPCIA_CSR(m) + 0x7C0) + +/* + * Error registers + */ +#define MCPCIA_MC_ERR0(m) (MCPCIA_CSR(m) + 0x800) +#define MCPCIA_MC_ERR1(m) (MCPCIA_CSR(m) + 0x840) +#define MCPCIA_CAP_ERR(m) (MCPCIA_CSR(m) + 0x880) +#define MCPCIA_PCI_ERR1(m) (MCPCIA_CSR(m) + 0x1040) +#define MCPCIA_MDPA_STAT(m) (MCPCIA_CSR(m) + 0x4000) +#define MCPCIA_MDPA_SYN(m) (MCPCIA_CSR(m) + 0x4040) +#define MCPCIA_MDPA_DIAG(m) (MCPCIA_CSR(m) + 0x4080) +#define MCPCIA_MDPB_STAT(m) (MCPCIA_CSR(m) + 0x8000) +#define MCPCIA_MDPB_SYN(m) (MCPCIA_CSR(m) + 0x8040) +#define MCPCIA_MDPB_DIAG(m) (MCPCIA_CSR(m) + 0x8080) + +/* + * PCI Address Translation Registers. + */ +#define MCPCIA_SG_TBIA(m) (MCPCIA_CSR(m) + 0x1300) +#define MCPCIA_HBASE(m) (MCPCIA_CSR(m) + 0x1340) + +#define MCPCIA_W0_BASE(m) (MCPCIA_CSR(m) + 0x1400) +#define MCPCIA_W0_MASK(m) (MCPCIA_CSR(m) + 0x1440) +#define MCPCIA_T0_BASE(m) (MCPCIA_CSR(m) + 0x1480) + +#define MCPCIA_W1_BASE(m) (MCPCIA_CSR(m) + 0x1500) +#define MCPCIA_W1_MASK(m) (MCPCIA_CSR(m) + 0x1540) +#define MCPCIA_T1_BASE(m) (MCPCIA_CSR(m) + 0x1580) + +#define MCPCIA_W2_BASE(m) (MCPCIA_CSR(m) + 0x1600) +#define MCPCIA_W2_MASK(m) (MCPCIA_CSR(m) + 0x1640) +#define MCPCIA_T2_BASE(m) (MCPCIA_CSR(m) + 0x1680) + +#define MCPCIA_W3_BASE(m) (MCPCIA_CSR(m) + 0x1700) +#define MCPCIA_W3_MASK(m) (MCPCIA_CSR(m) + 0x1740) +#define MCPCIA_T3_BASE(m) (MCPCIA_CSR(m) + 0x1780) + +/* Hack! Only words for bus 0. */ + +#ifndef MCPCIA_ONE_HAE_WINDOW +#define MCPCIA_HAE_ADDRESS MCPCIA_HAE_MEM(4) +#endif +#define MCPCIA_IACK_SC _MCPCIA_IACK_SC(4) + +/* + * The canonical non-remaped I/O and MEM addresses have these values + * subtracted out. This is arranged so that folks manipulating ISA + * devices can use their familiar numbers and have them map to bus 0. + */ + +#define MCPCIA_IO_BIAS MCPCIA_IO(4) +#define MCPCIA_MEM_BIAS MCPCIA_DENSE(4) + +/* Offset between ram physical addresses and pci64 DAC bus addresses. */ +#define MCPCIA_DAC_OFFSET (1UL << 40) + +/* + * Data structure for handling MCPCIA machine checks: + */ +struct el_MCPCIA_uncorrected_frame_mcheck { + struct el_common header; + struct el_common_EV5_uncorrectable_mcheck procdata; +}; + + +#ifdef __KERNEL__ + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __IO_EXTERN_INLINE +#endif + +/* + * I/O functions: + * + * MCPCIA, the RAWHIDE family PCI/memory support chipset for the EV5 (21164) + * and EV56 (21164a) processors, can use either a sparse address mapping + * scheme, or the so-called byte-word PCI address space, to get at PCI memory + * and I/O. + * + * Unfortunately, we can't use BWIO with EV5, so for now, we always use SPARSE. + */ + +/* + * Memory functions. 64-bit and 32-bit accesses are done through + * dense memory space, everything else through sparse space. + * + * For reading and writing 8 and 16 bit quantities we need to + * go through one of the three sparse address mapping regions + * and use the HAE_MEM CSR to provide some bits of the address. + * The following few routines use only sparse address region 1 + * which gives 1Gbyte of accessible space which relates exactly + * to the amount of PCI memory mapping *into* system address space. + * See p 6-17 of the specification but it looks something like this: + * + * 21164 Address: + * + * 3 2 1 + * 9876543210987654321098765432109876543210 + * 1ZZZZ0.PCI.QW.Address............BBLL + * + * ZZ = SBZ + * BB = Byte offset + * LL = Transfer length + * + * PCI Address: + * + * 3 2 1 + * 10987654321098765432109876543210 + * HHH....PCI.QW.Address........ 00 + * + * HHH = 31:29 HAE_MEM CSR + * + */ + +#define vip volatile int __force * +#define vuip volatile unsigned int __force * + +#ifdef MCPCIA_ONE_HAE_WINDOW +#define MCPCIA_FROB_MMIO \ + if (__mcpcia_is_mmio(hose)) { \ + set_hae(hose & 0xffffffff); \ + hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4); \ + } +#else +#define MCPCIA_FROB_MMIO \ + if (__mcpcia_is_mmio(hose)) { \ + hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4); \ + } +#endif + +extern inline int __mcpcia_is_mmio(unsigned long addr) +{ + return (addr & 0x80000000UL) == 0; +} + +__EXTERN_INLINE unsigned int mcpcia_ioread8(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK; + unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK; + unsigned long result; + + MCPCIA_FROB_MMIO; + + result = *(vip) ((addr << 5) + hose + 0x00); + return __kernel_extbl(result, addr & 3); +} + +__EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK; + unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK; + unsigned long w; + + MCPCIA_FROB_MMIO; + + w = __kernel_insbl(b, addr & 3); + *(vuip) ((addr << 5) + hose + 0x00) = w; +} + +__EXTERN_INLINE unsigned int mcpcia_ioread16(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK; + unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK; + unsigned long result; + + MCPCIA_FROB_MMIO; + + result = *(vip) ((addr << 5) + hose + 0x08); + return __kernel_extwl(result, addr & 3); +} + +__EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK; + unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK; + unsigned long w; + + MCPCIA_FROB_MMIO; + + w = __kernel_inswl(b, addr & 3); + *(vuip) ((addr << 5) + hose + 0x08) = w; +} + +__EXTERN_INLINE unsigned int mcpcia_ioread32(void __iomem *xaddr) +{ + unsigned long addr = (unsigned long)xaddr; + + if (!__mcpcia_is_mmio(addr)) + addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18; + + return *(vuip)addr; +} + +__EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long)xaddr; + + if (!__mcpcia_is_mmio(addr)) + addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18; + + *(vuip)addr = b; +} + + +__EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr) +{ + return (void __iomem *)(addr + MCPCIA_IO_BIAS); +} + +__EXTERN_INLINE void __iomem *mcpcia_ioremap(unsigned long addr, + unsigned long size) +{ + return (void __iomem *)(addr + MCPCIA_MEM_BIAS); +} + +__EXTERN_INLINE int mcpcia_is_ioaddr(unsigned long addr) +{ + return addr >= MCPCIA_SPARSE(0); +} + +__EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + return __mcpcia_is_mmio(addr); +} + +#undef MCPCIA_FROB_MMIO + +#undef vip +#undef vuip + +#undef __IO_PREFIX +#define __IO_PREFIX mcpcia +#define mcpcia_trivial_rw_bw 2 +#define mcpcia_trivial_rw_lq 1 +#define mcpcia_trivial_io_bw 0 +#define mcpcia_trivial_io_lq 0 +#define mcpcia_trivial_iounmap 1 +#include <asm/io_trivial.h> + +#ifdef __IO_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_MCPCIA__H__ */ diff --git a/arch/alpha/include/asm/core_polaris.h b/arch/alpha/include/asm/core_polaris.h new file mode 100644 index 000000000000..2f966b64659d --- /dev/null +++ b/arch/alpha/include/asm/core_polaris.h @@ -0,0 +1,110 @@ +#ifndef __ALPHA_POLARIS__H__ +#define __ALPHA_POLARIS__H__ + +#include <linux/types.h> +#include <asm/compiler.h> + +/* + * POLARIS is the internal name for a core logic chipset which provides + * memory controller and PCI access for the 21164PC chip based systems. + * + * This file is based on: + * + * Polaris System Controller + * Device Functional Specification + * 22-Jan-98 + * Rev. 4.2 + * + */ + +/* Polaris memory regions */ +#define POLARIS_SPARSE_MEM_BASE (IDENT_ADDR + 0xf800000000UL) +#define POLARIS_DENSE_MEM_BASE (IDENT_ADDR + 0xf900000000UL) +#define POLARIS_SPARSE_IO_BASE (IDENT_ADDR + 0xf980000000UL) +#define POLARIS_SPARSE_CONFIG_BASE (IDENT_ADDR + 0xf9c0000000UL) +#define POLARIS_IACK_BASE (IDENT_ADDR + 0xf9f8000000UL) +#define POLARIS_DENSE_IO_BASE (IDENT_ADDR + 0xf9fc000000UL) +#define POLARIS_DENSE_CONFIG_BASE (IDENT_ADDR + 0xf9fe000000UL) + +#define POLARIS_IACK_SC POLARIS_IACK_BASE + +/* The Polaris command/status registers live in PCI Config space for + * bus 0/device 0. As such, they may be bytes, words, or doublewords. + */ +#define POLARIS_W_VENID (POLARIS_DENSE_CONFIG_BASE) +#define POLARIS_W_DEVID (POLARIS_DENSE_CONFIG_BASE+2) +#define POLARIS_W_CMD (POLARIS_DENSE_CONFIG_BASE+4) +#define POLARIS_W_STATUS (POLARIS_DENSE_CONFIG_BASE+6) + +/* + * Data structure for handling POLARIS machine checks: + */ +struct el_POLARIS_sysdata_mcheck { + u_long psc_status; + u_long psc_pcictl0; + u_long psc_pcictl1; + u_long psc_pcictl2; +}; + +#ifdef __KERNEL__ + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __IO_EXTERN_INLINE +#endif + +/* + * I/O functions: + * + * POLARIS, the PCI/memory support chipset for the PCA56 (21164PC) + * processors, can use either a sparse address mapping scheme, or the + * so-called byte-word PCI address space, to get at PCI memory and I/O. + * + * However, we will support only the BWX form. + */ + +/* + * Memory functions. Polaris allows all accesses (byte/word + * as well as long/quad) to be done through dense space. + * + * We will only support DENSE access via BWX insns. + */ + +__EXTERN_INLINE void __iomem *polaris_ioportmap(unsigned long addr) +{ + return (void __iomem *)(addr + POLARIS_DENSE_IO_BASE); +} + +__EXTERN_INLINE void __iomem *polaris_ioremap(unsigned long addr, + unsigned long size) +{ + return (void __iomem *)(addr + POLARIS_DENSE_MEM_BASE); +} + +__EXTERN_INLINE int polaris_is_ioaddr(unsigned long addr) +{ + return addr >= POLARIS_SPARSE_MEM_BASE; +} + +__EXTERN_INLINE int polaris_is_mmio(const volatile void __iomem *addr) +{ + return (unsigned long)addr < POLARIS_SPARSE_IO_BASE; +} + +#undef __IO_PREFIX +#define __IO_PREFIX polaris +#define polaris_trivial_rw_bw 1 +#define polaris_trivial_rw_lq 1 +#define polaris_trivial_io_bw 1 +#define polaris_trivial_io_lq 1 +#define polaris_trivial_iounmap 1 +#include <asm/io_trivial.h> + +#ifdef __IO_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_POLARIS__H__ */ diff --git a/arch/alpha/include/asm/core_t2.h b/arch/alpha/include/asm/core_t2.h new file mode 100644 index 000000000000..46bfff58f670 --- /dev/null +++ b/arch/alpha/include/asm/core_t2.h @@ -0,0 +1,633 @@ +#ifndef __ALPHA_T2__H__ +#define __ALPHA_T2__H__ + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <asm/compiler.h> +#include <asm/system.h> + +/* + * T2 is the internal name for the core logic chipset which provides + * memory controller and PCI access for the SABLE-based systems. + * + * This file is based on: + * + * SABLE I/O Specification + * Revision/Update Information: 1.3 + * + * jestabro@amt.tay1.dec.com Initial Version. + * + */ + +#define T2_MEM_R1_MASK 0x07ffffff /* Mem sparse region 1 mask is 26 bits */ + +/* GAMMA-SABLE is a SABLE with EV5-based CPUs */ +/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */ +#define _GAMMA_BIAS 0x8000000000UL + +#if defined(CONFIG_ALPHA_GENERIC) +#define GAMMA_BIAS alpha_mv.sys.t2.gamma_bias +#elif defined(CONFIG_ALPHA_GAMMA) +#define GAMMA_BIAS _GAMMA_BIAS +#else +#define GAMMA_BIAS 0 +#endif + +/* + * Memory spaces: + */ +#define T2_CONF (IDENT_ADDR + GAMMA_BIAS + 0x390000000UL) +#define T2_IO (IDENT_ADDR + GAMMA_BIAS + 0x3a0000000UL) +#define T2_SPARSE_MEM (IDENT_ADDR + GAMMA_BIAS + 0x200000000UL) +#define T2_DENSE_MEM (IDENT_ADDR + GAMMA_BIAS + 0x3c0000000UL) + +#define T2_IOCSR (IDENT_ADDR + GAMMA_BIAS + 0x38e000000UL) +#define T2_CERR1 (IDENT_ADDR + GAMMA_BIAS + 0x38e000020UL) +#define T2_CERR2 (IDENT_ADDR + GAMMA_BIAS + 0x38e000040UL) +#define T2_CERR3 (IDENT_ADDR + GAMMA_BIAS + 0x38e000060UL) +#define T2_PERR1 (IDENT_ADDR + GAMMA_BIAS + 0x38e000080UL) +#define T2_PERR2 (IDENT_ADDR + GAMMA_BIAS + 0x38e0000a0UL) +#define T2_PSCR (IDENT_ADDR + GAMMA_BIAS + 0x38e0000c0UL) +#define T2_HAE_1 (IDENT_ADDR + GAMMA_BIAS + 0x38e0000e0UL) +#define T2_HAE_2 (IDENT_ADDR + GAMMA_BIAS + 0x38e000100UL) +#define T2_HBASE (IDENT_ADDR + GAMMA_BIAS + 0x38e000120UL) +#define T2_WBASE1 (IDENT_ADDR + GAMMA_BIAS + 0x38e000140UL) +#define T2_WMASK1 (IDENT_ADDR + GAMMA_BIAS + 0x38e000160UL) +#define T2_TBASE1 (IDENT_ADDR + GAMMA_BIAS + 0x38e000180UL) +#define T2_WBASE2 (IDENT_ADDR + GAMMA_BIAS + 0x38e0001a0UL) +#define T2_WMASK2 (IDENT_ADDR + GAMMA_BIAS + 0x38e0001c0UL) +#define T2_TBASE2 (IDENT_ADDR + GAMMA_BIAS + 0x38e0001e0UL) +#define T2_TLBBR (IDENT_ADDR + GAMMA_BIAS + 0x38e000200UL) +#define T2_IVR (IDENT_ADDR + GAMMA_BIAS + 0x38e000220UL) +#define T2_HAE_3 (IDENT_ADDR + GAMMA_BIAS + 0x38e000240UL) +#define T2_HAE_4 (IDENT_ADDR + GAMMA_BIAS + 0x38e000260UL) + +/* The CSRs below are T3/T4 only */ +#define T2_WBASE3 (IDENT_ADDR + GAMMA_BIAS + 0x38e000280UL) +#define T2_WMASK3 (IDENT_ADDR + GAMMA_BIAS + 0x38e0002a0UL) +#define T2_TBASE3 (IDENT_ADDR + GAMMA_BIAS + 0x38e0002c0UL) + +#define T2_TDR0 (IDENT_ADDR + GAMMA_BIAS + 0x38e000300UL) +#define T2_TDR1 (IDENT_ADDR + GAMMA_BIAS + 0x38e000320UL) +#define T2_TDR2 (IDENT_ADDR + GAMMA_BIAS + 0x38e000340UL) +#define T2_TDR3 (IDENT_ADDR + GAMMA_BIAS + 0x38e000360UL) +#define T2_TDR4 (IDENT_ADDR + GAMMA_BIAS + 0x38e000380UL) +#define T2_TDR5 (IDENT_ADDR + GAMMA_BIAS + 0x38e0003a0UL) +#define T2_TDR6 (IDENT_ADDR + GAMMA_BIAS + 0x38e0003c0UL) +#define T2_TDR7 (IDENT_ADDR + GAMMA_BIAS + 0x38e0003e0UL) + +#define T2_WBASE4 (IDENT_ADDR + GAMMA_BIAS + 0x38e000400UL) +#define T2_WMASK4 (IDENT_ADDR + GAMMA_BIAS + 0x38e000420UL) +#define T2_TBASE4 (IDENT_ADDR + GAMMA_BIAS + 0x38e000440UL) + +#define T2_AIR (IDENT_ADDR + GAMMA_BIAS + 0x38e000460UL) +#define T2_VAR (IDENT_ADDR + GAMMA_BIAS + 0x38e000480UL) +#define T2_DIR (IDENT_ADDR + GAMMA_BIAS + 0x38e0004a0UL) +#define T2_ICE (IDENT_ADDR + GAMMA_BIAS + 0x38e0004c0UL) + +#define T2_HAE_ADDRESS T2_HAE_1 + +/* T2 CSRs are in the non-cachable primary IO space from 3.8000.0000 to + 3.8fff.ffff + * + * +--------------+ 3 8000 0000 + * | CPU 0 CSRs | + * +--------------+ 3 8100 0000 + * | CPU 1 CSRs | + * +--------------+ 3 8200 0000 + * | CPU 2 CSRs | + * +--------------+ 3 8300 0000 + * | CPU 3 CSRs | + * +--------------+ 3 8400 0000 + * | CPU Reserved | + * +--------------+ 3 8700 0000 + * | Mem Reserved | + * +--------------+ 3 8800 0000 + * | Mem 0 CSRs | + * +--------------+ 3 8900 0000 + * | Mem 1 CSRs | + * +--------------+ 3 8a00 0000 + * | Mem 2 CSRs | + * +--------------+ 3 8b00 0000 + * | Mem 3 CSRs | + * +--------------+ 3 8c00 0000 + * | Mem Reserved | + * +--------------+ 3 8e00 0000 + * | PCI Bridge | + * +--------------+ 3 8f00 0000 + * | Expansion IO | + * +--------------+ 3 9000 0000 + * + * + */ +#define T2_CPU0_BASE (IDENT_ADDR + GAMMA_BIAS + 0x380000000L) +#define T2_CPU1_BASE (IDENT_ADDR + GAMMA_BIAS + 0x381000000L) +#define T2_CPU2_BASE (IDENT_ADDR + GAMMA_BIAS + 0x382000000L) +#define T2_CPU3_BASE (IDENT_ADDR + GAMMA_BIAS + 0x383000000L) + +#define T2_CPUn_BASE(n) (T2_CPU0_BASE + (((n)&3) * 0x001000000L)) + +#define T2_MEM0_BASE (IDENT_ADDR + GAMMA_BIAS + 0x388000000L) +#define T2_MEM1_BASE (IDENT_ADDR + GAMMA_BIAS + 0x389000000L) +#define T2_MEM2_BASE (IDENT_ADDR + GAMMA_BIAS + 0x38a000000L) +#define T2_MEM3_BASE (IDENT_ADDR + GAMMA_BIAS + 0x38b000000L) + + +/* + * Sable CPU Module CSRS + * + * These are CSRs for hardware other than the CPU chip on the CPU module. + * The CPU module has Backup Cache control logic, Cbus control logic, and + * interrupt control logic on it. There is a duplicate tag store to speed + * up maintaining cache coherency. + */ + +struct sable_cpu_csr { + unsigned long bcc; long fill_00[3]; /* Backup Cache Control */ + unsigned long bcce; long fill_01[3]; /* Backup Cache Correctable Error */ + unsigned long bccea; long fill_02[3]; /* B-Cache Corr Err Address Latch */ + unsigned long bcue; long fill_03[3]; /* B-Cache Uncorrectable Error */ + unsigned long bcuea; long fill_04[3]; /* B-Cache Uncorr Err Addr Latch */ + unsigned long dter; long fill_05[3]; /* Duplicate Tag Error */ + unsigned long cbctl; long fill_06[3]; /* CBus Control */ + unsigned long cbe; long fill_07[3]; /* CBus Error */ + unsigned long cbeal; long fill_08[3]; /* CBus Error Addr Latch low */ + unsigned long cbeah; long fill_09[3]; /* CBus Error Addr Latch high */ + unsigned long pmbx; long fill_10[3]; /* Processor Mailbox */ + unsigned long ipir; long fill_11[3]; /* Inter-Processor Int Request */ + unsigned long sic; long fill_12[3]; /* System Interrupt Clear */ + unsigned long adlk; long fill_13[3]; /* Address Lock (LDxL/STxC) */ + unsigned long madrl; long fill_14[3]; /* CBus Miss Address */ + unsigned long rev; long fill_15[3]; /* CMIC Revision */ +}; + +/* + * Data structure for handling T2 machine checks: + */ +struct el_t2_frame_header { + unsigned int elcf_fid; /* Frame ID (from above) */ + unsigned int elcf_size; /* Size of frame in bytes */ +}; + +struct el_t2_procdata_mcheck { + unsigned long elfmc_paltemp[32]; /* PAL TEMP REGS. */ + /* EV4-specific fields */ + unsigned long elfmc_exc_addr; /* Addr of excepting insn. */ + unsigned long elfmc_exc_sum; /* Summary of arith traps. */ + unsigned long elfmc_exc_mask; /* Exception mask (from exc_sum). */ + unsigned long elfmc_iccsr; /* IBox hardware enables. */ + unsigned long elfmc_pal_base; /* Base address for PALcode. */ + unsigned long elfmc_hier; /* Hardware Interrupt Enable. */ + unsigned long elfmc_hirr; /* Hardware Interrupt Request. */ + unsigned long elfmc_mm_csr; /* D-stream fault info. */ + unsigned long elfmc_dc_stat; /* D-cache status (ECC/Parity Err). */ + unsigned long elfmc_dc_addr; /* EV3 Phys Addr for ECC/DPERR. */ + unsigned long elfmc_abox_ctl; /* ABox Control Register. */ + unsigned long elfmc_biu_stat; /* BIU Status. */ + unsigned long elfmc_biu_addr; /* BUI Address. */ + unsigned long elfmc_biu_ctl; /* BIU Control. */ + unsigned long elfmc_fill_syndrome; /* For correcting ECC errors. */ + unsigned long elfmc_fill_addr;/* Cache block which was being read. */ + unsigned long elfmc_va; /* Effective VA of fault or miss. */ + unsigned long elfmc_bc_tag; /* Backup Cache Tag Probe Results. */ +}; + +/* + * Sable processor specific Machine Check Data segment. + */ + +struct el_t2_logout_header { + unsigned int elfl_size; /* size in bytes of logout area. */ + unsigned int elfl_sbz1:31; /* Should be zero. */ + unsigned int elfl_retry:1; /* Retry flag. */ + unsigned int elfl_procoffset; /* Processor-specific offset. */ + unsigned int elfl_sysoffset; /* Offset of system-specific. */ + unsigned int elfl_error_type; /* PAL error type code. */ + unsigned int elfl_frame_rev; /* PAL Frame revision. */ +}; +struct el_t2_sysdata_mcheck { + unsigned long elcmc_bcc; /* CSR 0 */ + unsigned long elcmc_bcce; /* CSR 1 */ + unsigned long elcmc_bccea; /* CSR 2 */ + unsigned long elcmc_bcue; /* CSR 3 */ + unsigned long elcmc_bcuea; /* CSR 4 */ + unsigned long elcmc_dter; /* CSR 5 */ + unsigned long elcmc_cbctl; /* CSR 6 */ + unsigned long elcmc_cbe; /* CSR 7 */ + unsigned long elcmc_cbeal; /* CSR 8 */ + unsigned long elcmc_cbeah; /* CSR 9 */ + unsigned long elcmc_pmbx; /* CSR 10 */ + unsigned long elcmc_ipir; /* CSR 11 */ + unsigned long elcmc_sic; /* CSR 12 */ + unsigned long elcmc_adlk; /* CSR 13 */ + unsigned long elcmc_madrl; /* CSR 14 */ + unsigned long elcmc_crrev4; /* CSR 15 */ +}; + +/* + * Sable memory error frame - sable pfms section 3.42 + */ +struct el_t2_data_memory { + struct el_t2_frame_header elcm_hdr; /* ID$MEM-FERR = 0x08 */ + unsigned int elcm_module; /* Module id. */ + unsigned int elcm_res04; /* Reserved. */ + unsigned long elcm_merr; /* CSR0: Error Reg 1. */ + unsigned long elcm_mcmd1; /* CSR1: Command Trap 1. */ + unsigned long elcm_mcmd2; /* CSR2: Command Trap 2. */ + unsigned long elcm_mconf; /* CSR3: Configuration. */ + unsigned long elcm_medc1; /* CSR4: EDC Status 1. */ + unsigned long elcm_medc2; /* CSR5: EDC Status 2. */ + unsigned long elcm_medcc; /* CSR6: EDC Control. */ + unsigned long elcm_msctl; /* CSR7: Stream Buffer Control. */ + unsigned long elcm_mref; /* CSR8: Refresh Control. */ + unsigned long elcm_filter; /* CSR9: CRD Filter Control. */ +}; + + +/* + * Sable other CPU error frame - sable pfms section 3.43 + */ +struct el_t2_data_other_cpu { + short elco_cpuid; /* CPU ID */ + short elco_res02[3]; + unsigned long elco_bcc; /* CSR 0 */ + unsigned long elco_bcce; /* CSR 1 */ + unsigned long elco_bccea; /* CSR 2 */ + unsigned long elco_bcue; /* CSR 3 */ + unsigned long elco_bcuea; /* CSR 4 */ + unsigned long elco_dter; /* CSR 5 */ + unsigned long elco_cbctl; /* CSR 6 */ + unsigned long elco_cbe; /* CSR 7 */ + unsigned long elco_cbeal; /* CSR 8 */ + unsigned long elco_cbeah; /* CSR 9 */ + unsigned long elco_pmbx; /* CSR 10 */ + unsigned long elco_ipir; /* CSR 11 */ + unsigned long elco_sic; /* CSR 12 */ + unsigned long elco_adlk; /* CSR 13 */ + unsigned long elco_madrl; /* CSR 14 */ + unsigned long elco_crrev4; /* CSR 15 */ +}; + +/* + * Sable other CPU error frame - sable pfms section 3.44 + */ +struct el_t2_data_t2{ + struct el_t2_frame_header elct_hdr; /* ID$T2-FRAME */ + unsigned long elct_iocsr; /* IO Control and Status Register */ + unsigned long elct_cerr1; /* Cbus Error Register 1 */ + unsigned long elct_cerr2; /* Cbus Error Register 2 */ + unsigned long elct_cerr3; /* Cbus Error Register 3 */ + unsigned long elct_perr1; /* PCI Error Register 1 */ + unsigned long elct_perr2; /* PCI Error Register 2 */ + unsigned long elct_hae0_1; /* High Address Extension Register 1 */ + unsigned long elct_hae0_2; /* High Address Extension Register 2 */ + unsigned long elct_hbase; /* High Base Register */ + unsigned long elct_wbase1; /* Window Base Register 1 */ + unsigned long elct_wmask1; /* Window Mask Register 1 */ + unsigned long elct_tbase1; /* Translated Base Register 1 */ + unsigned long elct_wbase2; /* Window Base Register 2 */ + unsigned long elct_wmask2; /* Window Mask Register 2 */ + unsigned long elct_tbase2; /* Translated Base Register 2 */ + unsigned long elct_tdr0; /* TLB Data Register 0 */ + unsigned long elct_tdr1; /* TLB Data Register 1 */ + unsigned long elct_tdr2; /* TLB Data Register 2 */ + unsigned long elct_tdr3; /* TLB Data Register 3 */ + unsigned long elct_tdr4; /* TLB Data Register 4 */ + unsigned long elct_tdr5; /* TLB Data Register 5 */ + unsigned long elct_tdr6; /* TLB Data Register 6 */ + unsigned long elct_tdr7; /* TLB Data Register 7 */ +}; + +/* + * Sable error log data structure - sable pfms section 3.40 + */ +struct el_t2_data_corrected { + unsigned long elcpb_biu_stat; + unsigned long elcpb_biu_addr; + unsigned long elcpb_biu_ctl; + unsigned long elcpb_fill_syndrome; + unsigned long elcpb_fill_addr; + unsigned long elcpb_bc_tag; +}; + +/* + * Sable error log data structure + * Note there are 4 memory slots on sable (see t2.h) + */ +struct el_t2_frame_mcheck { + struct el_t2_frame_header elfmc_header; /* ID$P-FRAME_MCHECK */ + struct el_t2_logout_header elfmc_hdr; + struct el_t2_procdata_mcheck elfmc_procdata; + struct el_t2_sysdata_mcheck elfmc_sysdata; + struct el_t2_data_t2 elfmc_t2data; + struct el_t2_data_memory elfmc_memdata[4]; + struct el_t2_frame_header elfmc_footer; /* empty */ +}; + + +/* + * Sable error log data structures on memory errors + */ +struct el_t2_frame_corrected { + struct el_t2_frame_header elfcc_header; /* ID$P-BC-COR */ + struct el_t2_logout_header elfcc_hdr; + struct el_t2_data_corrected elfcc_procdata; +/* struct el_t2_data_t2 elfcc_t2data; */ +/* struct el_t2_data_memory elfcc_memdata[4]; */ + struct el_t2_frame_header elfcc_footer; /* empty */ +}; + + +#ifdef __KERNEL__ + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __IO_EXTERN_INLINE +#endif + +/* + * I/O functions: + * + * T2 (the core logic PCI/memory support chipset for the SABLE + * series of processors uses a sparse address mapping scheme to + * get at PCI memory and I/O. + */ + +#define vip volatile int * +#define vuip volatile unsigned int * + +extern inline u8 t2_inb(unsigned long addr) +{ + long result = *(vip) ((addr << 5) + T2_IO + 0x00); + return __kernel_extbl(result, addr & 3); +} + +extern inline void t2_outb(u8 b, unsigned long addr) +{ + unsigned long w; + + w = __kernel_insbl(b, addr & 3); + *(vuip) ((addr << 5) + T2_IO + 0x00) = w; + mb(); +} + +extern inline u16 t2_inw(unsigned long addr) +{ + long result = *(vip) ((addr << 5) + T2_IO + 0x08); + return __kernel_extwl(result, addr & 3); +} + +extern inline void t2_outw(u16 b, unsigned long addr) +{ + unsigned long w; + + w = __kernel_inswl(b, addr & 3); + *(vuip) ((addr << 5) + T2_IO + 0x08) = w; + mb(); +} + +extern inline u32 t2_inl(unsigned long addr) +{ + return *(vuip) ((addr << 5) + T2_IO + 0x18); +} + +extern inline void t2_outl(u32 b, unsigned long addr) +{ + *(vuip) ((addr << 5) + T2_IO + 0x18) = b; + mb(); +} + + +/* + * Memory functions. + * + * For reading and writing 8 and 16 bit quantities we need to + * go through one of the three sparse address mapping regions + * and use the HAE_MEM CSR to provide some bits of the address. + * The following few routines use only sparse address region 1 + * which gives 1Gbyte of accessible space which relates exactly + * to the amount of PCI memory mapping *into* system address space. + * See p 6-17 of the specification but it looks something like this: + * + * 21164 Address: + * + * 3 2 1 + * 9876543210987654321098765432109876543210 + * 1ZZZZ0.PCI.QW.Address............BBLL + * + * ZZ = SBZ + * BB = Byte offset + * LL = Transfer length + * + * PCI Address: + * + * 3 2 1 + * 10987654321098765432109876543210 + * HHH....PCI.QW.Address........ 00 + * + * HHH = 31:29 HAE_MEM CSR + * + */ + +#define t2_set_hae { \ + msb = addr >> 27; \ + addr &= T2_MEM_R1_MASK; \ + set_hae(msb); \ +} + +extern spinlock_t t2_hae_lock; + +/* + * NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since + * they may be called directly, rather than through the + * ioreadNN/iowriteNN routines. + */ + +__EXTERN_INLINE u8 t2_readb(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM; + unsigned long result, msb; + unsigned long flags; + spin_lock_irqsave(&t2_hae_lock, flags); + + t2_set_hae; + + result = *(vip) ((addr << 5) + T2_SPARSE_MEM + 0x00); + spin_unlock_irqrestore(&t2_hae_lock, flags); + return __kernel_extbl(result, addr & 3); +} + +__EXTERN_INLINE u16 t2_readw(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM; + unsigned long result, msb; + unsigned long flags; + spin_lock_irqsave(&t2_hae_lock, flags); + + t2_set_hae; + + result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08); + spin_unlock_irqrestore(&t2_hae_lock, flags); + return __kernel_extwl(result, addr & 3); +} + +/* + * On SABLE with T2, we must use SPARSE memory even for 32-bit access, + * because we cannot access all of DENSE without changing its HAE. + */ +__EXTERN_INLINE u32 t2_readl(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM; + unsigned long result, msb; + unsigned long flags; + spin_lock_irqsave(&t2_hae_lock, flags); + + t2_set_hae; + + result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18); + spin_unlock_irqrestore(&t2_hae_lock, flags); + return result & 0xffffffffUL; +} + +__EXTERN_INLINE u64 t2_readq(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM; + unsigned long r0, r1, work, msb; + unsigned long flags; + spin_lock_irqsave(&t2_hae_lock, flags); + + t2_set_hae; + + work = (addr << 5) + T2_SPARSE_MEM + 0x18; + r0 = *(vuip)(work); + r1 = *(vuip)(work + (4 << 5)); + spin_unlock_irqrestore(&t2_hae_lock, flags); + return r1 << 32 | r0; +} + +__EXTERN_INLINE void t2_writeb(u8 b, volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM; + unsigned long msb, w; + unsigned long flags; + spin_lock_irqsave(&t2_hae_lock, flags); + + t2_set_hae; + + w = __kernel_insbl(b, addr & 3); + *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x00) = w; + spin_unlock_irqrestore(&t2_hae_lock, flags); +} + +__EXTERN_INLINE void t2_writew(u16 b, volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM; + unsigned long msb, w; + unsigned long flags; + spin_lock_irqsave(&t2_hae_lock, flags); + + t2_set_hae; + + w = __kernel_inswl(b, addr & 3); + *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08) = w; + spin_unlock_irqrestore(&t2_hae_lock, flags); +} + +/* + * On SABLE with T2, we must use SPARSE memory even for 32-bit access, + * because we cannot access all of DENSE without changing its HAE. + */ +__EXTERN_INLINE void t2_writel(u32 b, volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM; + unsigned long msb; + unsigned long flags; + spin_lock_irqsave(&t2_hae_lock, flags); + + t2_set_hae; + + *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18) = b; + spin_unlock_irqrestore(&t2_hae_lock, flags); +} + +__EXTERN_INLINE void t2_writeq(u64 b, volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM; + unsigned long msb, work; + unsigned long flags; + spin_lock_irqsave(&t2_hae_lock, flags); + + t2_set_hae; + + work = (addr << 5) + T2_SPARSE_MEM + 0x18; + *(vuip)work = b; + *(vuip)(work + (4 << 5)) = b >> 32; + spin_unlock_irqrestore(&t2_hae_lock, flags); +} + +__EXTERN_INLINE void __iomem *t2_ioportmap(unsigned long addr) +{ + return (void __iomem *)(addr + T2_IO); +} + +__EXTERN_INLINE void __iomem *t2_ioremap(unsigned long addr, + unsigned long size) +{ + return (void __iomem *)(addr + T2_DENSE_MEM); +} + +__EXTERN_INLINE int t2_is_ioaddr(unsigned long addr) +{ + return (long)addr >= 0; +} + +__EXTERN_INLINE int t2_is_mmio(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= T2_DENSE_MEM; +} + +/* New-style ioread interface. The mmio routines are so ugly for T2 that + it doesn't make sense to merge the pio and mmio routines. */ + +#define IOPORT(OS, NS) \ +__EXTERN_INLINE unsigned int t2_ioread##NS(void __iomem *xaddr) \ +{ \ + if (t2_is_mmio(xaddr)) \ + return t2_read##OS(xaddr); \ + else \ + return t2_in##OS((unsigned long)xaddr - T2_IO); \ +} \ +__EXTERN_INLINE void t2_iowrite##NS(u##NS b, void __iomem *xaddr) \ +{ \ + if (t2_is_mmio(xaddr)) \ + t2_write##OS(b, xaddr); \ + else \ + t2_out##OS(b, (unsigned long)xaddr - T2_IO); \ +} + +IOPORT(b, 8) +IOPORT(w, 16) +IOPORT(l, 32) + +#undef IOPORT + +#undef vip +#undef vuip + +#undef __IO_PREFIX +#define __IO_PREFIX t2 +#define t2_trivial_rw_bw 0 +#define t2_trivial_rw_lq 0 +#define t2_trivial_io_bw 0 +#define t2_trivial_io_lq 0 +#define t2_trivial_iounmap 1 +#include <asm/io_trivial.h> + +#ifdef __IO_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_T2__H__ */ diff --git a/arch/alpha/include/asm/core_titan.h b/arch/alpha/include/asm/core_titan.h new file mode 100644 index 000000000000..a17f6f33b68e --- /dev/null +++ b/arch/alpha/include/asm/core_titan.h @@ -0,0 +1,410 @@ +#ifndef __ALPHA_TITAN__H__ +#define __ALPHA_TITAN__H__ + +#include <linux/types.h> +#include <linux/pci.h> +#include <asm/compiler.h> + +/* + * TITAN is the internal names for a core logic chipset which provides + * memory controller and PCI/AGP access for 21264 based systems. + * + * This file is based on: + * + * Titan Chipset Engineering Specification + * Revision 0.12 + * 13 July 1999 + * + */ + +/* XXX: Do we need to conditionalize on this? */ +#ifdef USE_48_BIT_KSEG +#define TI_BIAS 0x80000000000UL +#else +#define TI_BIAS 0x10000000000UL +#endif + +/* + * CChip, DChip, and PChip registers + */ + +typedef struct { + volatile unsigned long csr __attribute__((aligned(64))); +} titan_64; + +typedef struct { + titan_64 csc; + titan_64 mtr; + titan_64 misc; + titan_64 mpd; + titan_64 aar0; + titan_64 aar1; + titan_64 aar2; + titan_64 aar3; + titan_64 dim0; + titan_64 dim1; + titan_64 dir0; + titan_64 dir1; + titan_64 drir; + titan_64 prben; + titan_64 iic0; + titan_64 iic1; + titan_64 mpr0; + titan_64 mpr1; + titan_64 mpr2; + titan_64 mpr3; + titan_64 rsvd[2]; + titan_64 ttr; + titan_64 tdr; + titan_64 dim2; + titan_64 dim3; + titan_64 dir2; + titan_64 dir3; + titan_64 iic2; + titan_64 iic3; + titan_64 pwr; + titan_64 reserved[17]; + titan_64 cmonctla; + titan_64 cmonctlb; + titan_64 cmoncnt01; + titan_64 cmoncnt23; + titan_64 cpen; +} titan_cchip; + +typedef struct { + titan_64 dsc; + titan_64 str; + titan_64 drev; + titan_64 dsc2; +} titan_dchip; + +typedef struct { + titan_64 wsba[4]; + titan_64 wsm[4]; + titan_64 tba[4]; + titan_64 pctl; + titan_64 plat; + titan_64 reserved0[2]; + union { + struct { + titan_64 serror; + titan_64 serren; + titan_64 serrset; + titan_64 reserved0; + titan_64 gperror; + titan_64 gperren; + titan_64 gperrset; + titan_64 reserved1; + titan_64 gtlbiv; + titan_64 gtlbia; + titan_64 reserved2[2]; + titan_64 sctl; + titan_64 reserved3[3]; + } g; + struct { + titan_64 agperror; + titan_64 agperren; + titan_64 agperrset; + titan_64 agplastwr; + titan_64 aperror; + titan_64 aperren; + titan_64 aperrset; + titan_64 reserved0; + titan_64 atlbiv; + titan_64 atlbia; + titan_64 reserved1[6]; + } a; + } port_specific; + titan_64 sprst; + titan_64 reserved1[31]; +} titan_pachip_port; + +typedef struct { + titan_pachip_port g_port; + titan_pachip_port a_port; +} titan_pachip; + +#define TITAN_cchip ((titan_cchip *)(IDENT_ADDR+TI_BIAS+0x1A0000000UL)) +#define TITAN_dchip ((titan_dchip *)(IDENT_ADDR+TI_BIAS+0x1B0000800UL)) +#define TITAN_pachip0 ((titan_pachip *)(IDENT_ADDR+TI_BIAS+0x180000000UL)) +#define TITAN_pachip1 ((titan_pachip *)(IDENT_ADDR+TI_BIAS+0x380000000UL)) +extern unsigned TITAN_agp; +extern int TITAN_bootcpu; + +/* + * TITAN PA-chip Window Space Base Address register. + * (WSBA[0-2]) + */ +#define wsba_m_ena 0x1 +#define wsba_m_sg 0x2 +#define wsba_m_addr 0xFFF00000 +#define wmask_k_sz1gb 0x3FF00000 +union TPAchipWSBA { + struct { + unsigned wsba_v_ena : 1; + unsigned wsba_v_sg : 1; + unsigned wsba_v_rsvd1 : 18; + unsigned wsba_v_addr : 12; + unsigned wsba_v_rsvd2 : 32; + } wsba_r_bits; + int wsba_q_whole [2]; +}; + +/* + * TITAN PA-chip Control Register + * This definition covers both the G-Port GPCTL and the A-PORT APCTL. + * Bits <51:0> are the same in both cases. APCTL<63:52> are only + * applicable to AGP. + */ +#define pctl_m_fbtb 0x00000001 +#define pctl_m_thdis 0x00000002 +#define pctl_m_chaindis 0x00000004 +#define pctl_m_tgtlat 0x00000018 +#define pctl_m_hole 0x00000020 +#define pctl_m_mwin 0x00000040 +#define pctl_m_arbena 0x00000080 +#define pctl_m_prigrp 0x0000FF00 +#define pctl_m_ppri 0x00010000 +#define pctl_m_pcispd66 0x00020000 +#define pctl_m_cngstlt 0x003C0000 +#define pctl_m_ptpdesten 0x3FC00000 +#define pctl_m_dpcen 0x40000000 +#define pctl_m_apcen 0x0000000080000000UL +#define pctl_m_dcrtv 0x0000000300000000UL +#define pctl_m_en_stepping 0x0000000400000000UL +#define apctl_m_rsvd1 0x000FFFF800000000UL +#define apctl_m_agp_rate 0x0030000000000000UL +#define apctl_m_agp_sba_en 0x0040000000000000UL +#define apctl_m_agp_en 0x0080000000000000UL +#define apctl_m_rsvd2 0x0100000000000000UL +#define apctl_m_agp_present 0x0200000000000000UL +#define apctl_agp_hp_rd 0x1C00000000000000UL +#define apctl_agp_lp_rd 0xE000000000000000UL +#define gpctl_m_rsvd 0xFFFFFFF800000000UL +union TPAchipPCTL { + struct { + unsigned pctl_v_fbtb : 1; /* A/G [0] */ + unsigned pctl_v_thdis : 1; /* A/G [1] */ + unsigned pctl_v_chaindis : 1; /* A/G [2] */ + unsigned pctl_v_tgtlat : 2; /* A/G [4:3] */ + unsigned pctl_v_hole : 1; /* A/G [5] */ + unsigned pctl_v_mwin : 1; /* A/G [6] */ + unsigned pctl_v_arbena : 1; /* A/G [7] */ + unsigned pctl_v_prigrp : 8; /* A/G [15:8] */ + unsigned pctl_v_ppri : 1; /* A/G [16] */ + unsigned pctl_v_pcispd66 : 1; /* A/G [17] */ + unsigned pctl_v_cngstlt : 4; /* A/G [21:18] */ + unsigned pctl_v_ptpdesten : 8; /* A/G [29:22] */ + unsigned pctl_v_dpcen : 1; /* A/G [30] */ + unsigned pctl_v_apcen : 1; /* A/G [31] */ + unsigned pctl_v_dcrtv : 2; /* A/G [33:32] */ + unsigned pctl_v_en_stepping :1; /* A/G [34] */ + unsigned apctl_v_rsvd1 : 17; /* A [51:35] */ + unsigned apctl_v_agp_rate : 2; /* A [53:52] */ + unsigned apctl_v_agp_sba_en : 1; /* A [54] */ + unsigned apctl_v_agp_en : 1; /* A [55] */ + unsigned apctl_v_rsvd2 : 1; /* A [56] */ + unsigned apctl_v_agp_present : 1; /* A [57] */ + unsigned apctl_v_agp_hp_rd : 3; /* A [60:58] */ + unsigned apctl_v_agp_lp_rd : 3; /* A [63:61] */ + } pctl_r_bits; + unsigned int pctl_l_whole [2]; + unsigned long pctl_q_whole; +}; + +/* + * SERROR / SERREN / SERRSET + */ +union TPAchipSERR { + struct { + unsigned serr_v_lost_uecc : 1; /* [0] */ + unsigned serr_v_uecc : 1; /* [1] */ + unsigned serr_v_cre : 1; /* [2] */ + unsigned serr_v_nxio : 1; /* [3] */ + unsigned serr_v_lost_cre : 1; /* [4] */ + unsigned serr_v_rsvd0 : 10; /* [14:5] */ + unsigned serr_v_addr : 32; /* [46:15] */ + unsigned serr_v_rsvd1 : 5; /* [51:47] */ + unsigned serr_v_source : 2; /* [53:52] */ + unsigned serr_v_cmd : 2; /* [55:54] */ + unsigned serr_v_syn : 8; /* [63:56] */ + } serr_r_bits; + unsigned int serr_l_whole[2]; + unsigned long serr_q_whole; +}; + +/* + * GPERROR / APERROR / GPERREN / APERREN / GPERRSET / APERRSET + */ +union TPAchipPERR { + struct { + unsigned long perr_v_lost : 1; /* [0] */ + unsigned long perr_v_serr : 1; /* [1] */ + unsigned long perr_v_perr : 1; /* [2] */ + unsigned long perr_v_dcrto : 1; /* [3] */ + unsigned long perr_v_sge : 1; /* [4] */ + unsigned long perr_v_ape : 1; /* [5] */ + unsigned long perr_v_ta : 1; /* [6] */ + unsigned long perr_v_dpe : 1; /* [7] */ + unsigned long perr_v_nds : 1; /* [8] */ + unsigned long perr_v_iptpr : 1; /* [9] */ + unsigned long perr_v_iptpw : 1; /* [10] */ + unsigned long perr_v_rsvd0 : 3; /* [13:11] */ + unsigned long perr_v_addr : 33; /* [46:14] */ + unsigned long perr_v_dac : 1; /* [47] */ + unsigned long perr_v_mwin : 1; /* [48] */ + unsigned long perr_v_rsvd1 : 3; /* [51:49] */ + unsigned long perr_v_cmd : 4; /* [55:52] */ + unsigned long perr_v_rsvd2 : 8; /* [63:56] */ + } perr_r_bits; + unsigned int perr_l_whole[2]; + unsigned long perr_q_whole; +}; + +/* + * AGPERROR / AGPERREN / AGPERRSET + */ +union TPAchipAGPERR { + struct { + unsigned agperr_v_lost : 1; /* [0] */ + unsigned agperr_v_lpqfull : 1; /* [1] */ + unsigned apgerr_v_hpqfull : 1; /* [2] */ + unsigned agperr_v_rescmd : 1; /* [3] */ + unsigned agperr_v_ipte : 1; /* [4] */ + unsigned agperr_v_ptp : 1; /* [5] */ + unsigned agperr_v_nowindow : 1; /* [6] */ + unsigned agperr_v_rsvd0 : 8; /* [14:7] */ + unsigned agperr_v_addr : 32; /* [46:15] */ + unsigned agperr_v_rsvd1 : 1; /* [47] */ + unsigned agperr_v_dac : 1; /* [48] */ + unsigned agperr_v_mwin : 1; /* [49] */ + unsigned agperr_v_cmd : 3; /* [52:50] */ + unsigned agperr_v_length : 6; /* [58:53] */ + unsigned agperr_v_fence : 1; /* [59] */ + unsigned agperr_v_rsvd2 : 4; /* [63:60] */ + } agperr_r_bits; + unsigned int agperr_l_whole[2]; + unsigned long agperr_q_whole; +}; +/* + * Memory spaces: + * Hose numbers are assigned as follows: + * 0 - pachip 0 / G Port + * 1 - pachip 1 / G Port + * 2 - pachip 0 / A Port + * 3 - pachip 1 / A Port + */ +#define TITAN_HOSE_SHIFT (33) +#define TITAN_HOSE(h) (((unsigned long)(h)) << TITAN_HOSE_SHIFT) +#define TITAN_BASE (IDENT_ADDR + TI_BIAS) +#define TITAN_MEM(h) (TITAN_BASE+TITAN_HOSE(h)+0x000000000UL) +#define _TITAN_IACK_SC(h) (TITAN_BASE+TITAN_HOSE(h)+0x1F8000000UL) +#define TITAN_IO(h) (TITAN_BASE+TITAN_HOSE(h)+0x1FC000000UL) +#define TITAN_CONF(h) (TITAN_BASE+TITAN_HOSE(h)+0x1FE000000UL) + +#define TITAN_HOSE_MASK TITAN_HOSE(3) +#define TITAN_IACK_SC _TITAN_IACK_SC(0) /* hack! */ + +/* + * The canonical non-remaped I/O and MEM addresses have these values + * subtracted out. This is arranged so that folks manipulating ISA + * devices can use their familiar numbers and have them map to bus 0. + */ + +#define TITAN_IO_BIAS TITAN_IO(0) +#define TITAN_MEM_BIAS TITAN_MEM(0) + +/* The IO address space is larger than 0xffff */ +#define TITAN_IO_SPACE (TITAN_CONF(0) - TITAN_IO(0)) + +/* TIG Space */ +#define TITAN_TIG_SPACE (TITAN_BASE + 0x100000000UL) + +/* Offset between ram physical addresses and pci64 DAC bus addresses. */ +/* ??? Just a guess. Ought to confirm it hasn't been moved. */ +#define TITAN_DAC_OFFSET (1UL << 40) + +/* + * Data structure for handling TITAN machine checks: + */ +#define SCB_Q_SYSERR 0x620 +#define SCB_Q_PROCERR 0x630 +#define SCB_Q_SYSMCHK 0x660 +#define SCB_Q_PROCMCHK 0x670 +#define SCB_Q_SYSEVENT 0x680 /* environmental / system management */ +struct el_TITAN_sysdata_mcheck { + u64 summary; /* 0x00 */ + u64 c_dirx; /* 0x08 */ + u64 c_misc; /* 0x10 */ + u64 p0_serror; /* 0x18 */ + u64 p0_gperror; /* 0x20 */ + u64 p0_aperror; /* 0x28 */ + u64 p0_agperror;/* 0x30 */ + u64 p1_serror; /* 0x38 */ + u64 p1_gperror; /* 0x40 */ + u64 p1_aperror; /* 0x48 */ + u64 p1_agperror;/* 0x50 */ +}; + +/* + * System area for a privateer 680 environmental/system management mcheck + */ +struct el_PRIVATEER_envdata_mcheck { + u64 summary; /* 0x00 */ + u64 c_dirx; /* 0x08 */ + u64 smir; /* 0x10 */ + u64 cpuir; /* 0x18 */ + u64 psir; /* 0x20 */ + u64 fault; /* 0x28 */ + u64 sys_doors; /* 0x30 */ + u64 temp_warn; /* 0x38 */ + u64 fan_ctrl; /* 0x40 */ + u64 code; /* 0x48 */ + u64 reserved; /* 0x50 */ +}; + +#ifdef __KERNEL__ + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __IO_EXTERN_INLINE +#endif + +/* + * I/O functions: + * + * TITAN, a 21??? PCI/memory support chipset for the EV6 (21264) + * can only use linear accesses to get at PCI/AGP memory and I/O spaces. + */ + +/* + * Memory functions. all accesses are done through linear space. + */ +extern void __iomem *titan_ioportmap(unsigned long addr); +extern void __iomem *titan_ioremap(unsigned long addr, unsigned long size); +extern void titan_iounmap(volatile void __iomem *addr); + +__EXTERN_INLINE int titan_is_ioaddr(unsigned long addr) +{ + return addr >= TITAN_BASE; +} + +extern int titan_is_mmio(const volatile void __iomem *addr); + +#undef __IO_PREFIX +#define __IO_PREFIX titan +#define titan_trivial_rw_bw 1 +#define titan_trivial_rw_lq 1 +#define titan_trivial_io_bw 1 +#define titan_trivial_io_lq 1 +#define titan_trivial_iounmap 0 +#include <asm/io_trivial.h> + +#ifdef __IO_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_TITAN__H__ */ diff --git a/arch/alpha/include/asm/core_tsunami.h b/arch/alpha/include/asm/core_tsunami.h new file mode 100644 index 000000000000..58d4fe48742c --- /dev/null +++ b/arch/alpha/include/asm/core_tsunami.h @@ -0,0 +1,335 @@ +#ifndef __ALPHA_TSUNAMI__H__ +#define __ALPHA_TSUNAMI__H__ + +#include <linux/types.h> +#include <linux/pci.h> +#include <asm/compiler.h> + +/* + * TSUNAMI/TYPHOON are the internal names for the core logic chipset which + * provides memory controller and PCI access for the 21264 based systems. + * + * This file is based on: + * + * Tsunami System Programmers Manual + * Preliminary, Chapters 2-5 + * + */ + +/* XXX: Do we need to conditionalize on this? */ +#ifdef USE_48_BIT_KSEG +#define TS_BIAS 0x80000000000UL +#else +#define TS_BIAS 0x10000000000UL +#endif + +/* + * CChip, DChip, and PChip registers + */ + +typedef struct { + volatile unsigned long csr __attribute__((aligned(64))); +} tsunami_64; + +typedef struct { + tsunami_64 csc; + tsunami_64 mtr; + tsunami_64 misc; + tsunami_64 mpd; + tsunami_64 aar0; + tsunami_64 aar1; + tsunami_64 aar2; + tsunami_64 aar3; + tsunami_64 dim0; + tsunami_64 dim1; + tsunami_64 dir0; + tsunami_64 dir1; + tsunami_64 drir; + tsunami_64 prben; + tsunami_64 iic; /* a.k.a. iic0 */ + tsunami_64 wdr; /* a.k.a. iic1 */ + tsunami_64 mpr0; + tsunami_64 mpr1; + tsunami_64 mpr2; + tsunami_64 mpr3; + tsunami_64 mctl; + tsunami_64 __pad1; + tsunami_64 ttr; + tsunami_64 tdr; + tsunami_64 dim2; + tsunami_64 dim3; + tsunami_64 dir2; + tsunami_64 dir3; + tsunami_64 iic2; + tsunami_64 iic3; +} tsunami_cchip; + +typedef struct { + tsunami_64 dsc; + tsunami_64 str; + tsunami_64 drev; +} tsunami_dchip; + +typedef struct { + tsunami_64 wsba[4]; + tsunami_64 wsm[4]; + tsunami_64 tba[4]; + tsunami_64 pctl; + tsunami_64 plat; + tsunami_64 reserved; + tsunami_64 perror; + tsunami_64 perrmask; + tsunami_64 perrset; + tsunami_64 tlbiv; + tsunami_64 tlbia; + tsunami_64 pmonctl; + tsunami_64 pmoncnt; +} tsunami_pchip; + +#define TSUNAMI_cchip ((tsunami_cchip *)(IDENT_ADDR+TS_BIAS+0x1A0000000UL)) +#define TSUNAMI_dchip ((tsunami_dchip *)(IDENT_ADDR+TS_BIAS+0x1B0000800UL)) +#define TSUNAMI_pchip0 ((tsunami_pchip *)(IDENT_ADDR+TS_BIAS+0x180000000UL)) +#define TSUNAMI_pchip1 ((tsunami_pchip *)(IDENT_ADDR+TS_BIAS+0x380000000UL)) +extern int TSUNAMI_bootcpu; + +/* + * TSUNAMI Pchip Error register. + */ + +#define perror_m_lost 0x1 +#define perror_m_serr 0x2 +#define perror_m_perr 0x4 +#define perror_m_dcrto 0x8 +#define perror_m_sge 0x10 +#define perror_m_ape 0x20 +#define perror_m_ta 0x40 +#define perror_m_rdpe 0x80 +#define perror_m_nds 0x100 +#define perror_m_rto 0x200 +#define perror_m_uecc 0x400 +#define perror_m_cre 0x800 +#define perror_m_addrl 0xFFFFFFFF0000UL +#define perror_m_addrh 0x7000000000000UL +#define perror_m_cmd 0xF0000000000000UL +#define perror_m_syn 0xFF00000000000000UL +union TPchipPERROR { + struct { + unsigned int perror_v_lost : 1; + unsigned perror_v_serr : 1; + unsigned perror_v_perr : 1; + unsigned perror_v_dcrto : 1; + unsigned perror_v_sge : 1; + unsigned perror_v_ape : 1; + unsigned perror_v_ta : 1; + unsigned perror_v_rdpe : 1; + unsigned perror_v_nds : 1; + unsigned perror_v_rto : 1; + unsigned perror_v_uecc : 1; + unsigned perror_v_cre : 1; + unsigned perror_v_rsvd1 : 4; + unsigned perror_v_addrl : 32; + unsigned perror_v_addrh : 3; + unsigned perror_v_rsvd2 : 1; + unsigned perror_v_cmd : 4; + unsigned perror_v_syn : 8; + } perror_r_bits; + int perror_q_whole [2]; +}; + +/* + * TSUNAMI Pchip Window Space Base Address register. + */ +#define wsba_m_ena 0x1 +#define wsba_m_sg 0x2 +#define wsba_m_ptp 0x4 +#define wsba_m_addr 0xFFF00000 +#define wmask_k_sz1gb 0x3FF00000 +union TPchipWSBA { + struct { + unsigned wsba_v_ena : 1; + unsigned wsba_v_sg : 1; + unsigned wsba_v_ptp : 1; + unsigned wsba_v_rsvd1 : 17; + unsigned wsba_v_addr : 12; + unsigned wsba_v_rsvd2 : 32; + } wsba_r_bits; + int wsba_q_whole [2]; +}; + +/* + * TSUNAMI Pchip Control Register + */ +#define pctl_m_fdsc 0x1 +#define pctl_m_fbtb 0x2 +#define pctl_m_thdis 0x4 +#define pctl_m_chaindis 0x8 +#define pctl_m_tgtlat 0x10 +#define pctl_m_hole 0x20 +#define pctl_m_mwin 0x40 +#define pctl_m_arbena 0x80 +#define pctl_m_prigrp 0x7F00 +#define pctl_m_ppri 0x8000 +#define pctl_m_rsvd1 0x30000 +#define pctl_m_eccen 0x40000 +#define pctl_m_padm 0x80000 +#define pctl_m_cdqmax 0xF00000 +#define pctl_m_rev 0xFF000000 +#define pctl_m_crqmax 0xF00000000UL +#define pctl_m_ptpmax 0xF000000000UL +#define pctl_m_pclkx 0x30000000000UL +#define pctl_m_fdsdis 0x40000000000UL +#define pctl_m_fdwdis 0x80000000000UL +#define pctl_m_ptevrfy 0x100000000000UL +#define pctl_m_rpp 0x200000000000UL +#define pctl_m_pid 0xC00000000000UL +#define pctl_m_rsvd2 0xFFFF000000000000UL + +union TPchipPCTL { + struct { + unsigned pctl_v_fdsc : 1; + unsigned pctl_v_fbtb : 1; + unsigned pctl_v_thdis : 1; + unsigned pctl_v_chaindis : 1; + unsigned pctl_v_tgtlat : 1; + unsigned pctl_v_hole : 1; + unsigned pctl_v_mwin : 1; + unsigned pctl_v_arbena : 1; + unsigned pctl_v_prigrp : 7; + unsigned pctl_v_ppri : 1; + unsigned pctl_v_rsvd1 : 2; + unsigned pctl_v_eccen : 1; + unsigned pctl_v_padm : 1; + unsigned pctl_v_cdqmax : 4; + unsigned pctl_v_rev : 8; + unsigned pctl_v_crqmax : 4; + unsigned pctl_v_ptpmax : 4; + unsigned pctl_v_pclkx : 2; + unsigned pctl_v_fdsdis : 1; + unsigned pctl_v_fdwdis : 1; + unsigned pctl_v_ptevrfy : 1; + unsigned pctl_v_rpp : 1; + unsigned pctl_v_pid : 2; + unsigned pctl_v_rsvd2 : 16; + } pctl_r_bits; + int pctl_q_whole [2]; +}; + +/* + * TSUNAMI Pchip Error Mask Register. + */ +#define perrmask_m_lost 0x1 +#define perrmask_m_serr 0x2 +#define perrmask_m_perr 0x4 +#define perrmask_m_dcrto 0x8 +#define perrmask_m_sge 0x10 +#define perrmask_m_ape 0x20 +#define perrmask_m_ta 0x40 +#define perrmask_m_rdpe 0x80 +#define perrmask_m_nds 0x100 +#define perrmask_m_rto 0x200 +#define perrmask_m_uecc 0x400 +#define perrmask_m_cre 0x800 +#define perrmask_m_rsvd 0xFFFFFFFFFFFFF000UL +union TPchipPERRMASK { + struct { + unsigned int perrmask_v_lost : 1; + unsigned perrmask_v_serr : 1; + unsigned perrmask_v_perr : 1; + unsigned perrmask_v_dcrto : 1; + unsigned perrmask_v_sge : 1; + unsigned perrmask_v_ape : 1; + unsigned perrmask_v_ta : 1; + unsigned perrmask_v_rdpe : 1; + unsigned perrmask_v_nds : 1; + unsigned perrmask_v_rto : 1; + unsigned perrmask_v_uecc : 1; + unsigned perrmask_v_cre : 1; + unsigned perrmask_v_rsvd1 : 20; + unsigned perrmask_v_rsvd2 : 32; + } perrmask_r_bits; + int perrmask_q_whole [2]; +}; + +/* + * Memory spaces: + */ +#define TSUNAMI_HOSE(h) (((unsigned long)(h)) << 33) +#define TSUNAMI_BASE (IDENT_ADDR + TS_BIAS) + +#define TSUNAMI_MEM(h) (TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x000000000UL) +#define _TSUNAMI_IACK_SC(h) (TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1F8000000UL) +#define TSUNAMI_IO(h) (TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1FC000000UL) +#define TSUNAMI_CONF(h) (TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1FE000000UL) + +#define TSUNAMI_IACK_SC _TSUNAMI_IACK_SC(0) /* hack! */ + + +/* + * The canonical non-remaped I/O and MEM addresses have these values + * subtracted out. This is arranged so that folks manipulating ISA + * devices can use their familiar numbers and have them map to bus 0. + */ + +#define TSUNAMI_IO_BIAS TSUNAMI_IO(0) +#define TSUNAMI_MEM_BIAS TSUNAMI_MEM(0) + +/* The IO address space is larger than 0xffff */ +#define TSUNAMI_IO_SPACE (TSUNAMI_CONF(0) - TSUNAMI_IO(0)) + +/* Offset between ram physical addresses and pci64 DAC bus addresses. */ +#define TSUNAMI_DAC_OFFSET (1UL << 40) + +/* + * Data structure for handling TSUNAMI machine checks: + */ +struct el_TSUNAMI_sysdata_mcheck { +}; + + +#ifdef __KERNEL__ + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __IO_EXTERN_INLINE +#endif + +/* + * I/O functions: + * + * TSUNAMI, the 21??? PCI/memory support chipset for the EV6 (21264) + * can only use linear accesses to get at PCI memory and I/O spaces. + */ + +/* + * Memory functions. all accesses are done through linear space. + */ +extern void __iomem *tsunami_ioportmap(unsigned long addr); +extern void __iomem *tsunami_ioremap(unsigned long addr, unsigned long size); +__EXTERN_INLINE int tsunami_is_ioaddr(unsigned long addr) +{ + return addr >= TSUNAMI_BASE; +} + +__EXTERN_INLINE int tsunami_is_mmio(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + return (addr & 0x100000000UL) == 0; +} + +#undef __IO_PREFIX +#define __IO_PREFIX tsunami +#define tsunami_trivial_rw_bw 1 +#define tsunami_trivial_rw_lq 1 +#define tsunami_trivial_io_bw 1 +#define tsunami_trivial_io_lq 1 +#define tsunami_trivial_iounmap 1 +#include <asm/io_trivial.h> + +#ifdef __IO_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_TSUNAMI__H__ */ diff --git a/arch/alpha/include/asm/core_wildfire.h b/arch/alpha/include/asm/core_wildfire.h new file mode 100644 index 000000000000..cd562f544ba2 --- /dev/null +++ b/arch/alpha/include/asm/core_wildfire.h @@ -0,0 +1,318 @@ +#ifndef __ALPHA_WILDFIRE__H__ +#define __ALPHA_WILDFIRE__H__ + +#include <linux/types.h> +#include <asm/compiler.h> + +#define WILDFIRE_MAX_QBB 8 /* more than 8 requires other mods */ +#define WILDFIRE_PCA_PER_QBB 4 +#define WILDFIRE_IRQ_PER_PCA 64 + +#define WILDFIRE_NR_IRQS \ + (WILDFIRE_MAX_QBB * WILDFIRE_PCA_PER_QBB * WILDFIRE_IRQ_PER_PCA) + +extern unsigned char wildfire_hard_qbb_map[WILDFIRE_MAX_QBB]; +extern unsigned char wildfire_soft_qbb_map[WILDFIRE_MAX_QBB]; +#define QBB_MAP_EMPTY 0xff + +extern unsigned long wildfire_hard_qbb_mask; +extern unsigned long wildfire_soft_qbb_mask; +extern unsigned long wildfire_gp_mask; +extern unsigned long wildfire_hs_mask; +extern unsigned long wildfire_iop_mask; +extern unsigned long wildfire_ior_mask; +extern unsigned long wildfire_pca_mask; +extern unsigned long wildfire_cpu_mask; +extern unsigned long wildfire_mem_mask; + +#define WILDFIRE_QBB_EXISTS(qbbno) (wildfire_soft_qbb_mask & (1 << (qbbno))) + +#define WILDFIRE_MEM_EXISTS(qbbno) (wildfire_mem_mask & (0xf << ((qbbno) << 2))) + +#define WILDFIRE_PCA_EXISTS(qbbno, pcano) \ + (wildfire_pca_mask & (1 << (((qbbno) << 2) + (pcano)))) + +typedef struct { + volatile unsigned long csr __attribute__((aligned(64))); +} wildfire_64; + +typedef struct { + volatile unsigned long csr __attribute__((aligned(256))); +} wildfire_256; + +typedef struct { + volatile unsigned long csr __attribute__((aligned(2048))); +} wildfire_2k; + +typedef struct { + wildfire_64 qsd_whami; + wildfire_64 qsd_rev; + wildfire_64 qsd_port_present; + wildfire_64 qsd_port_active; + wildfire_64 qsd_fault_ena; + wildfire_64 qsd_cpu_int_ena; + wildfire_64 qsd_mem_config; + wildfire_64 qsd_err_sum; + wildfire_64 ce_sum[4]; + wildfire_64 dev_init[4]; + wildfire_64 it_int[4]; + wildfire_64 ip_int[4]; + wildfire_64 uce_sum[4]; + wildfire_64 se_sum__non_dev_int[4]; + wildfire_64 scratch[4]; + wildfire_64 qsd_timer; + wildfire_64 qsd_diag; +} wildfire_qsd; + +typedef struct { + wildfire_256 qsd_whami; + wildfire_256 __pad1; + wildfire_256 ce_sum; + wildfire_256 dev_init; + wildfire_256 it_int; + wildfire_256 ip_int; + wildfire_256 uce_sum; + wildfire_256 se_sum; +} wildfire_fast_qsd; + +typedef struct { + wildfire_2k qsa_qbb_id; + wildfire_2k __pad1; + wildfire_2k qsa_port_ena; + wildfire_2k qsa_scratch; + wildfire_2k qsa_config[5]; + wildfire_2k qsa_ref_int; + wildfire_2k qsa_qbb_pop[2]; + wildfire_2k qsa_dtag_fc; + wildfire_2k __pad2[3]; + wildfire_2k qsa_diag; + wildfire_2k qsa_diag_lock[4]; + wildfire_2k __pad3[11]; + wildfire_2k qsa_cpu_err_sum; + wildfire_2k qsa_misc_err_sum; + wildfire_2k qsa_tmo_err_sum; + wildfire_2k qsa_err_ena; + wildfire_2k qsa_tmo_config; + wildfire_2k qsa_ill_cmd_err_sum; + wildfire_2k __pad4[26]; + wildfire_2k qsa_busy_mask; + wildfire_2k qsa_arr_valid; + wildfire_2k __pad5[2]; + wildfire_2k qsa_port_map[4]; + wildfire_2k qsa_arr_addr[8]; + wildfire_2k qsa_arr_mask[8]; +} wildfire_qsa; + +typedef struct { + wildfire_64 ioa_config; + wildfire_64 iod_config; + wildfire_64 iop_switch_credits; + wildfire_64 __pad1; + wildfire_64 iop_hose_credits; + wildfire_64 __pad2[11]; + struct { + wildfire_64 __pad3; + wildfire_64 init; + } iop_hose[4]; + wildfire_64 ioa_hose_0_ctrl; + wildfire_64 iod_hose_0_ctrl; + wildfire_64 ioa_hose_1_ctrl; + wildfire_64 iod_hose_1_ctrl; + wildfire_64 ioa_hose_2_ctrl; + wildfire_64 iod_hose_2_ctrl; + wildfire_64 ioa_hose_3_ctrl; + wildfire_64 iod_hose_3_ctrl; + struct { + wildfire_64 target; + wildfire_64 __pad4; + } iop_dev_int[4]; + + wildfire_64 iop_err_int_target; + wildfire_64 __pad5[7]; + wildfire_64 iop_qbb_err_sum; + wildfire_64 __pad6; + wildfire_64 iop_qbb_se_sum; + wildfire_64 __pad7; + wildfire_64 ioa_err_sum; + wildfire_64 iod_err_sum; + wildfire_64 __pad8[4]; + wildfire_64 ioa_diag_force_err; + wildfire_64 iod_diag_force_err; + wildfire_64 __pad9[4]; + wildfire_64 iop_diag_send_err_int; + wildfire_64 __pad10[15]; + wildfire_64 ioa_scratch; + wildfire_64 iod_scratch; +} wildfire_iop; + +typedef struct { + wildfire_2k gpa_qbb_map[4]; + wildfire_2k gpa_mem_pop_map; + wildfire_2k gpa_scratch; + wildfire_2k gpa_diag; + wildfire_2k gpa_config_0; + wildfire_2k __pad1; + wildfire_2k gpa_init_id; + wildfire_2k gpa_config_2; + /* not complete */ +} wildfire_gp; + +typedef struct { + wildfire_64 pca_what_am_i; + wildfire_64 pca_err_sum; + wildfire_64 pca_diag_force_err; + wildfire_64 pca_diag_send_err_int; + wildfire_64 pca_hose_credits; + wildfire_64 pca_scratch; + wildfire_64 pca_micro_addr; + wildfire_64 pca_micro_data; + wildfire_64 pca_pend_int; + wildfire_64 pca_sent_int; + wildfire_64 __pad1; + wildfire_64 pca_stdio_edge_level; + wildfire_64 __pad2[52]; + struct { + wildfire_64 target; + wildfire_64 enable; + } pca_int[4]; + wildfire_64 __pad3[56]; + wildfire_64 pca_alt_sent_int[32]; +} wildfire_pca; + +typedef struct { + wildfire_64 ne_what_am_i; + /* not complete */ +} wildfire_ne; + +typedef struct { + wildfire_64 fe_what_am_i; + /* not complete */ +} wildfire_fe; + +typedef struct { + wildfire_64 pci_io_addr_ext; + wildfire_64 pci_ctrl; + wildfire_64 pci_err_sum; + wildfire_64 pci_err_addr; + wildfire_64 pci_stall_cnt; + wildfire_64 pci_iack_special; + wildfire_64 __pad1[2]; + wildfire_64 pci_pend_int; + wildfire_64 pci_sent_int; + wildfire_64 __pad2[54]; + struct { + wildfire_64 wbase; + wildfire_64 wmask; + wildfire_64 tbase; + } pci_window[4]; + wildfire_64 pci_flush_tlb; + wildfire_64 pci_perf_mon; +} wildfire_pci; + +#define WILDFIRE_ENTITY_SHIFT 18 + +#define WILDFIRE_GP_ENTITY (0x10UL << WILDFIRE_ENTITY_SHIFT) +#define WILDFIRE_IOP_ENTITY (0x08UL << WILDFIRE_ENTITY_SHIFT) +#define WILDFIRE_QSA_ENTITY (0x04UL << WILDFIRE_ENTITY_SHIFT) +#define WILDFIRE_QSD_ENTITY_SLOW (0x05UL << WILDFIRE_ENTITY_SHIFT) +#define WILDFIRE_QSD_ENTITY_FAST (0x01UL << WILDFIRE_ENTITY_SHIFT) + +#define WILDFIRE_PCA_ENTITY(pca) ((0xc|(pca))<<WILDFIRE_ENTITY_SHIFT) + +#define WILDFIRE_BASE (IDENT_ADDR | (1UL << 40)) + +#define WILDFIRE_QBB_MASK 0x0fUL /* for now, only 4 bits/16 QBBs */ + +#define WILDFIRE_QBB(q) ((~((long)(q)) & WILDFIRE_QBB_MASK) << 36) +#define WILDFIRE_HOSE(h) ((long)(h) << 33) + +#define WILDFIRE_QBB_IO(q) (WILDFIRE_BASE | WILDFIRE_QBB(q)) +#define WILDFIRE_QBB_HOSE(q,h) (WILDFIRE_QBB_IO(q) | WILDFIRE_HOSE(h)) + +#define WILDFIRE_MEM(q,h) (WILDFIRE_QBB_HOSE(q,h) | 0x000000000UL) +#define WILDFIRE_CONF(q,h) (WILDFIRE_QBB_HOSE(q,h) | 0x1FE000000UL) +#define WILDFIRE_IO(q,h) (WILDFIRE_QBB_HOSE(q,h) | 0x1FF000000UL) + +#define WILDFIRE_qsd(q) \ + ((wildfire_qsd *)(WILDFIRE_QBB_IO(q)|WILDFIRE_QSD_ENTITY_SLOW|(((1UL<<13)-1)<<23))) + +#define WILDFIRE_fast_qsd() \ + ((wildfire_fast_qsd *)(WILDFIRE_QBB_IO(0)|WILDFIRE_QSD_ENTITY_FAST|(((1UL<<13)-1)<<23))) + +#define WILDFIRE_qsa(q) \ + ((wildfire_qsa *)(WILDFIRE_QBB_IO(q)|WILDFIRE_QSA_ENTITY|(((1UL<<13)-1)<<23))) + +#define WILDFIRE_iop(q) \ + ((wildfire_iop *)(WILDFIRE_QBB_IO(q)|WILDFIRE_IOP_ENTITY|(((1UL<<13)-1)<<23))) + +#define WILDFIRE_gp(q) \ + ((wildfire_gp *)(WILDFIRE_QBB_IO(q)|WILDFIRE_GP_ENTITY|(((1UL<<13)-1)<<23))) + +#define WILDFIRE_pca(q,pca) \ + ((wildfire_pca *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23))) + +#define WILDFIRE_ne(q,pca) \ + ((wildfire_ne *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23)|(1UL<<16))) + +#define WILDFIRE_fe(q,pca) \ + ((wildfire_fe *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23)|(3UL<<15))) + +#define WILDFIRE_pci(q,h) \ + ((wildfire_pci *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(((h)&6)>>1)|((((h)&1)|2)<<16)|(((1UL<<13)-1)<<23))) + +#define WILDFIRE_IO_BIAS WILDFIRE_IO(0,0) +#define WILDFIRE_MEM_BIAS WILDFIRE_MEM(0,0) /* ??? */ + +/* The IO address space is larger than 0xffff */ +#define WILDFIRE_IO_SPACE (8UL*1024*1024) + +#ifdef __KERNEL__ + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __IO_EXTERN_INLINE +#endif + +/* + * Memory functions. all accesses are done through linear space. + */ + +__EXTERN_INLINE void __iomem *wildfire_ioportmap(unsigned long addr) +{ + return (void __iomem *)(addr + WILDFIRE_IO_BIAS); +} + +__EXTERN_INLINE void __iomem *wildfire_ioremap(unsigned long addr, + unsigned long size) +{ + return (void __iomem *)(addr + WILDFIRE_MEM_BIAS); +} + +__EXTERN_INLINE int wildfire_is_ioaddr(unsigned long addr) +{ + return addr >= WILDFIRE_BASE; +} + +__EXTERN_INLINE int wildfire_is_mmio(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long)xaddr; + return (addr & 0x100000000UL) == 0; +} + +#undef __IO_PREFIX +#define __IO_PREFIX wildfire +#define wildfire_trivial_rw_bw 1 +#define wildfire_trivial_rw_lq 1 +#define wildfire_trivial_io_bw 1 +#define wildfire_trivial_io_lq 1 +#define wildfire_trivial_iounmap 1 +#include <asm/io_trivial.h> + +#ifdef __IO_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_WILDFIRE__H__ */ diff --git a/arch/alpha/include/asm/cputime.h b/arch/alpha/include/asm/cputime.h new file mode 100644 index 000000000000..19577fd93230 --- /dev/null +++ b/arch/alpha/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __ALPHA_CPUTIME_H +#define __ALPHA_CPUTIME_H + +#include <asm-generic/cputime.h> + +#endif /* __ALPHA_CPUTIME_H */ diff --git a/arch/alpha/include/asm/current.h b/arch/alpha/include/asm/current.h new file mode 100644 index 000000000000..094d285a1b34 --- /dev/null +++ b/arch/alpha/include/asm/current.h @@ -0,0 +1,9 @@ +#ifndef _ALPHA_CURRENT_H +#define _ALPHA_CURRENT_H + +#include <linux/thread_info.h> + +#define get_current() (current_thread_info()->task) +#define current get_current() + +#endif /* _ALPHA_CURRENT_H */ diff --git a/arch/alpha/include/asm/delay.h b/arch/alpha/include/asm/delay.h new file mode 100644 index 000000000000..2aa3f410f7e6 --- /dev/null +++ b/arch/alpha/include/asm/delay.h @@ -0,0 +1,10 @@ +#ifndef __ALPHA_DELAY_H +#define __ALPHA_DELAY_H + +extern void __delay(int loops); +extern void udelay(unsigned long usecs); + +extern void ndelay(unsigned long nsecs); +#define ndelay ndelay + +#endif /* defined(__ALPHA_DELAY_H) */ diff --git a/arch/alpha/include/asm/device.h b/arch/alpha/include/asm/device.h new file mode 100644 index 000000000000..d8f9872b0e2d --- /dev/null +++ b/arch/alpha/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include <asm-generic/device.h> + diff --git a/arch/alpha/include/asm/div64.h b/arch/alpha/include/asm/div64.h new file mode 100644 index 000000000000..6cd978cefb28 --- /dev/null +++ b/arch/alpha/include/asm/div64.h @@ -0,0 +1 @@ +#include <asm-generic/div64.h> diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h new file mode 100644 index 000000000000..a5801ae02e4b --- /dev/null +++ b/arch/alpha/include/asm/dma-mapping.h @@ -0,0 +1,69 @@ +#ifndef _ALPHA_DMA_MAPPING_H +#define _ALPHA_DMA_MAPPING_H + + +#ifdef CONFIG_PCI + +#include <linux/pci.h> + +#define dma_map_single(dev, va, size, dir) \ + pci_map_single(alpha_gendev_to_pci(dev), va, size, dir) +#define dma_unmap_single(dev, addr, size, dir) \ + pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir) +#define dma_alloc_coherent(dev, size, addr, gfp) \ + __pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr, gfp) +#define dma_free_coherent(dev, size, va, addr) \ + pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr) +#define dma_map_page(dev, page, off, size, dir) \ + pci_map_page(alpha_gendev_to_pci(dev), page, off, size, dir) +#define dma_unmap_page(dev, addr, size, dir) \ + pci_unmap_page(alpha_gendev_to_pci(dev), addr, size, dir) +#define dma_map_sg(dev, sg, nents, dir) \ + pci_map_sg(alpha_gendev_to_pci(dev), sg, nents, dir) +#define dma_unmap_sg(dev, sg, nents, dir) \ + pci_unmap_sg(alpha_gendev_to_pci(dev), sg, nents, dir) +#define dma_supported(dev, mask) \ + pci_dma_supported(alpha_gendev_to_pci(dev), mask) +#define dma_mapping_error(dev, addr) \ + pci_dma_mapping_error(alpha_gendev_to_pci(dev), addr) + +#else /* no PCI - no IOMMU. */ + +struct scatterlist; +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp); +int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction); + +#define dma_free_coherent(dev, size, va, addr) \ + free_pages((unsigned long)va, get_order(size)) +#define dma_supported(dev, mask) (mask < 0x00ffffffUL ? 0 : 1) +#define dma_map_single(dev, va, size, dir) virt_to_phys(va) +#define dma_map_page(dev, page, off, size, dir) (page_to_pa(page) + off) + +#define dma_unmap_single(dev, addr, size, dir) ((void)0) +#define dma_unmap_page(dev, addr, size, dir) ((void)0) +#define dma_unmap_sg(dev, sg, nents, dir) ((void)0) + +#define dma_mapping_error(dev, addr) (0) + +#endif /* !CONFIG_PCI */ + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#define dma_is_consistent(d, h) (1) + +int dma_set_mask(struct device *dev, u64 mask); + +#define dma_sync_single_for_cpu(dev, addr, size, dir) ((void)0) +#define dma_sync_single_for_device(dev, addr, size, dir) ((void)0) +#define dma_sync_single_range(dev, addr, off, size, dir) ((void)0) +#define dma_sync_sg_for_cpu(dev, sg, nents, dir) ((void)0) +#define dma_sync_sg_for_device(dev, sg, nents, dir) ((void)0) +#define dma_cache_sync(dev, va, size, dir) ((void)0) +#define dma_sync_single_range_for_cpu(dev, addr, offset, size, dir) ((void)0) +#define dma_sync_single_range_for_device(dev, addr, offset, size, dir) ((void)0) + +#define dma_get_cache_alignment() L1_CACHE_BYTES + +#endif /* _ALPHA_DMA_MAPPING_H */ diff --git a/arch/alpha/include/asm/dma.h b/arch/alpha/include/asm/dma.h new file mode 100644 index 000000000000..87cfdbdf08fc --- /dev/null +++ b/arch/alpha/include/asm/dma.h @@ -0,0 +1,376 @@ +/* + * include/asm-alpha/dma.h + * + * This is essentially the same as the i386 DMA stuff, as the AlphaPCs + * use ISA-compatible dma. The only extension is support for high-page + * registers that allow to set the top 8 bits of a 32-bit DMA address. + * This register should be written last when setting up a DMA address + * as this will also enable DMA across 64 KB boundaries. + */ + +/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $ + * linux/include/asm/dma.h: Defines for using and allocating dma channels. + * Written by Hennus Bergman, 1992. + * High DMA channel support & info by Hannu Savolainen + * and John Boyd, Nov. 1992. + */ + +#ifndef _ASM_DMA_H +#define _ASM_DMA_H + +#include <linux/spinlock.h> +#include <asm/io.h> + +#define dma_outb outb +#define dma_inb inb + +/* + * NOTES about DMA transfers: + * + * controller 1: channels 0-3, byte operations, ports 00-1F + * controller 2: channels 4-7, word operations, ports C0-DF + * + * - ALL registers are 8 bits only, regardless of transfer size + * - channel 4 is not used - cascades 1 into 2. + * - channels 0-3 are byte - addresses/counts are for physical bytes + * - channels 5-7 are word - addresses/counts are for physical words + * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries + * - transfer count loaded to registers is 1 less than actual count + * - controller 2 offsets are all even (2x offsets for controller 1) + * - page registers for 5-7 don't use data bit 0, represent 128K pages + * - page registers for 0-3 use bit 0, represent 64K pages + * + * DMA transfers are limited to the lower 16MB of _physical_ memory. + * Note that addresses loaded into registers must be _physical_ addresses, + * not logical addresses (which may differ if paging is active). + * + * Address mapping for channels 0-3: + * + * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * P7 ... P0 A7 ... A0 A7 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Address mapping for channels 5-7: + * + * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) + * | ... | \ \ ... \ \ \ ... \ \ + * | ... | \ \ ... \ \ \ ... \ (not used) + * | ... | \ \ ... \ \ \ ... \ + * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses + * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at + * the hardware level, so odd-byte transfers aren't possible). + * + * Transfer count (_not # bytes_) is limited to 64K, represented as actual + * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, + * and up to 128K bytes may be transferred on channels 5-7 in one operation. + * + */ + +#define MAX_DMA_CHANNELS 8 + +/* + ISA DMA limitations on Alpha platforms, + + These may be due to SIO (PCI<->ISA bridge) chipset limitation, or + just a wiring limit. +*/ + +/* The maximum address for ISA DMA transfer on Alpha XL, due to an + hardware SIO limitation, is 64MB. +*/ +#define ALPHA_XL_MAX_ISA_DMA_ADDRESS 0x04000000UL + +/* The maximum address for ISA DMA transfer on RUFFIAN, + due to an hardware SIO limitation, is 16MB. +*/ +#define ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS 0x01000000UL + +/* The maximum address for ISA DMA transfer on SABLE, and some ALCORs, + due to an hardware SIO chip limitation, is 2GB. +*/ +#define ALPHA_SABLE_MAX_ISA_DMA_ADDRESS 0x80000000UL +#define ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS 0x80000000UL + +/* + Maximum address for all the others is the complete 32-bit bus + address space. +*/ +#define ALPHA_MAX_ISA_DMA_ADDRESS 0x100000000UL + +#ifdef CONFIG_ALPHA_GENERIC +# define MAX_ISA_DMA_ADDRESS (alpha_mv.max_isa_dma_address) +#else +# if defined(CONFIG_ALPHA_XL) +# define MAX_ISA_DMA_ADDRESS ALPHA_XL_MAX_ISA_DMA_ADDRESS +# elif defined(CONFIG_ALPHA_RUFFIAN) +# define MAX_ISA_DMA_ADDRESS ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS +# elif defined(CONFIG_ALPHA_SABLE) +# define MAX_ISA_DMA_ADDRESS ALPHA_SABLE_MAX_ISA_DMA_ADDRESS +# elif defined(CONFIG_ALPHA_ALCOR) +# define MAX_ISA_DMA_ADDRESS ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS +# else +# define MAX_ISA_DMA_ADDRESS ALPHA_MAX_ISA_DMA_ADDRESS +# endif +#endif + +/* If we have the iommu, we don't have any address limitations on DMA. + Otherwise (Nautilus, RX164), we have to have 0-16 Mb DMA zone + like i386. */ +#define MAX_DMA_ADDRESS (alpha_mv.mv_pci_tbi ? \ + ~0UL : IDENT_ADDR + 0x01000000) + +/* 8237 DMA controllers */ +#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ +#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ + +/* DMA controller registers */ +#define DMA1_CMD_REG 0x08 /* command register (w) */ +#define DMA1_STAT_REG 0x08 /* status register (r) */ +#define DMA1_REQ_REG 0x09 /* request register (w) */ +#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ +#define DMA1_MODE_REG 0x0B /* mode register (w) */ +#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ +#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ +#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ +#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ +#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ +#define DMA1_EXT_MODE_REG (0x400 | DMA1_MODE_REG) + +#define DMA2_CMD_REG 0xD0 /* command register (w) */ +#define DMA2_STAT_REG 0xD0 /* status register (r) */ +#define DMA2_REQ_REG 0xD2 /* request register (w) */ +#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ +#define DMA2_MODE_REG 0xD6 /* mode register (w) */ +#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ +#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ +#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ +#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ +#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ +#define DMA2_EXT_MODE_REG (0x400 | DMA2_MODE_REG) + +#define DMA_ADDR_0 0x00 /* DMA address registers */ +#define DMA_ADDR_1 0x02 +#define DMA_ADDR_2 0x04 +#define DMA_ADDR_3 0x06 +#define DMA_ADDR_4 0xC0 +#define DMA_ADDR_5 0xC4 +#define DMA_ADDR_6 0xC8 +#define DMA_ADDR_7 0xCC + +#define DMA_CNT_0 0x01 /* DMA count registers */ +#define DMA_CNT_1 0x03 +#define DMA_CNT_2 0x05 +#define DMA_CNT_3 0x07 +#define DMA_CNT_4 0xC2 +#define DMA_CNT_5 0xC6 +#define DMA_CNT_6 0xCA +#define DMA_CNT_7 0xCE + +#define DMA_PAGE_0 0x87 /* DMA page registers */ +#define DMA_PAGE_1 0x83 +#define DMA_PAGE_2 0x81 +#define DMA_PAGE_3 0x82 +#define DMA_PAGE_5 0x8B +#define DMA_PAGE_6 0x89 +#define DMA_PAGE_7 0x8A + +#define DMA_HIPAGE_0 (0x400 | DMA_PAGE_0) +#define DMA_HIPAGE_1 (0x400 | DMA_PAGE_1) +#define DMA_HIPAGE_2 (0x400 | DMA_PAGE_2) +#define DMA_HIPAGE_3 (0x400 | DMA_PAGE_3) +#define DMA_HIPAGE_4 (0x400 | DMA_PAGE_4) +#define DMA_HIPAGE_5 (0x400 | DMA_PAGE_5) +#define DMA_HIPAGE_6 (0x400 | DMA_PAGE_6) +#define DMA_HIPAGE_7 (0x400 | DMA_PAGE_7) + +#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ +#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ +#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ + +#define DMA_AUTOINIT 0x10 + +extern spinlock_t dma_spin_lock; + +static __inline__ unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static __inline__ void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(dmanr, DMA1_MASK_REG); + else + dma_outb(dmanr & 3, DMA2_MASK_REG); +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(dmanr | 4, DMA1_MASK_REG); + else + dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(0, DMA1_CLEAR_FF_REG); + else + dma_outb(0, DMA2_CLEAR_FF_REG); +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + if (dmanr<=3) + dma_outb(mode | dmanr, DMA1_MODE_REG); + else + dma_outb(mode | (dmanr&3), DMA2_MODE_REG); +} + +/* set extended mode for a specific DMA channel */ +static __inline__ void set_dma_ext_mode(unsigned int dmanr, char ext_mode) +{ + if (dmanr<=3) + dma_outb(ext_mode | dmanr, DMA1_EXT_MODE_REG); + else + dma_outb(ext_mode | (dmanr&3), DMA2_EXT_MODE_REG); +} + +/* Set only the page register bits of the transfer address. + * This is used for successive transfers when we know the contents of + * the lower 16 bits of the DMA current address register. + */ +static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr) +{ + switch(dmanr) { + case 0: + dma_outb(pagenr, DMA_PAGE_0); + dma_outb((pagenr >> 8), DMA_HIPAGE_0); + break; + case 1: + dma_outb(pagenr, DMA_PAGE_1); + dma_outb((pagenr >> 8), DMA_HIPAGE_1); + break; + case 2: + dma_outb(pagenr, DMA_PAGE_2); + dma_outb((pagenr >> 8), DMA_HIPAGE_2); + break; + case 3: + dma_outb(pagenr, DMA_PAGE_3); + dma_outb((pagenr >> 8), DMA_HIPAGE_3); + break; + case 5: + dma_outb(pagenr & 0xfe, DMA_PAGE_5); + dma_outb((pagenr >> 8), DMA_HIPAGE_5); + break; + case 6: + dma_outb(pagenr & 0xfe, DMA_PAGE_6); + dma_outb((pagenr >> 8), DMA_HIPAGE_6); + break; + case 7: + dma_outb(pagenr & 0xfe, DMA_PAGE_7); + dma_outb((pagenr >> 8), DMA_HIPAGE_7); + break; + } +} + + +/* Set transfer address & page bits for specific DMA channel. + * Assumes dma flipflop is clear. + */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + if (dmanr <= 3) { + dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); + dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); + } else { + dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); + dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); + } + set_dma_page(dmanr, a>>16); /* set hipage last to enable 32-bit mode */ +} + + +/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for + * a specific DMA channel. + * You must ensure the parameters are valid. + * NOTE: from a manual: "the number of transfers is one more + * than the initial word count"! This is taken into account. + * Assumes dma flip-flop is clear. + * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + count--; + if (dmanr <= 3) { + dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); + dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); + } else { + dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); + dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); + } +} + + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + * + * Assumes DMA flip-flop is clear. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE + : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; + + /* using short to get 16-bit wrap around */ + unsigned short count; + + count = 1 + dma_inb(io_port); + count += dma_inb(io_port) << 8; + + return (dmanr<=3)? count : (count<<1); +} + + +/* These are in kernel/dma.c: */ +extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ +extern void free_dma(unsigned int dmanr); /* release it again */ +#define KERNEL_HAVE_CHECK_DMA +extern int check_dma(unsigned int dmanr); + +/* From PCI */ + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + + +#endif /* _ASM_DMA_H */ diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h new file mode 100644 index 000000000000..fc1002ea1e0c --- /dev/null +++ b/arch/alpha/include/asm/elf.h @@ -0,0 +1,165 @@ +#ifndef __ASM_ALPHA_ELF_H +#define __ASM_ALPHA_ELF_H + +#include <asm/auxvec.h> + +/* Special values for the st_other field in the symbol table. */ + +#define STO_ALPHA_NOPV 0x80 +#define STO_ALPHA_STD_GPLOAD 0x88 + +/* + * Alpha ELF relocation types + */ +#define R_ALPHA_NONE 0 /* No reloc */ +#define R_ALPHA_REFLONG 1 /* Direct 32 bit */ +#define R_ALPHA_REFQUAD 2 /* Direct 64 bit */ +#define R_ALPHA_GPREL32 3 /* GP relative 32 bit */ +#define R_ALPHA_LITERAL 4 /* GP relative 16 bit w/optimization */ +#define R_ALPHA_LITUSE 5 /* Optimization hint for LITERAL */ +#define R_ALPHA_GPDISP 6 /* Add displacement to GP */ +#define R_ALPHA_BRADDR 7 /* PC+4 relative 23 bit shifted */ +#define R_ALPHA_HINT 8 /* PC+4 relative 16 bit shifted */ +#define R_ALPHA_SREL16 9 /* PC relative 16 bit */ +#define R_ALPHA_SREL32 10 /* PC relative 32 bit */ +#define R_ALPHA_SREL64 11 /* PC relative 64 bit */ +#define R_ALPHA_GPRELHIGH 17 /* GP relative 32 bit, high 16 bits */ +#define R_ALPHA_GPRELLOW 18 /* GP relative 32 bit, low 16 bits */ +#define R_ALPHA_GPREL16 19 /* GP relative 16 bit */ +#define R_ALPHA_COPY 24 /* Copy symbol at runtime */ +#define R_ALPHA_GLOB_DAT 25 /* Create GOT entry */ +#define R_ALPHA_JMP_SLOT 26 /* Create PLT entry */ +#define R_ALPHA_RELATIVE 27 /* Adjust by program base */ +#define R_ALPHA_BRSGP 28 +#define R_ALPHA_TLSGD 29 +#define R_ALPHA_TLS_LDM 30 +#define R_ALPHA_DTPMOD64 31 +#define R_ALPHA_GOTDTPREL 32 +#define R_ALPHA_DTPREL64 33 +#define R_ALPHA_DTPRELHI 34 +#define R_ALPHA_DTPRELLO 35 +#define R_ALPHA_DTPREL16 36 +#define R_ALPHA_GOTTPREL 37 +#define R_ALPHA_TPREL64 38 +#define R_ALPHA_TPRELHI 39 +#define R_ALPHA_TPRELLO 40 +#define R_ALPHA_TPREL16 41 + +#define SHF_ALPHA_GPREL 0x10000000 + +/* Legal values for e_flags field of Elf64_Ehdr. */ + +#define EF_ALPHA_32BIT 1 /* All addresses are below 2GB */ + +/* + * ELF register definitions.. + */ + +/* + * The OSF/1 version of <sys/procfs.h> makes gregset_t 46 entries long. + * I have no idea why that is so. For now, we just leave it at 33 + * (32 general regs + processor status word). + */ +#define ELF_NGREG 33 +#define ELF_NFPREG 32 + +typedef unsigned long elf_greg_t; +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef double elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS64 +#define ELF_DATA ELFDATA2LSB +#define ELF_ARCH EM_ALPHA + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 8192 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE + 0x1000000) + +/* $0 is set by ld.so to a pointer to a function which might be + registered using atexit. This provides a mean for the dynamic + linker to call DT_FINI functions for shared libraries that have + been loaded before the code runs. + + So that we can use the same startup file with static executables, + we start programs with a value of 0 to indicate that there is no + such function. */ + +#define ELF_PLAT_INIT(_r, load_addr) _r->r0 = 0 + +/* The registers are layed out in pt_regs for PAL and syscall + convenience. Re-order them for the linear elf_gregset_t. */ + +struct pt_regs; +struct thread_info; +struct task_struct; +extern void dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt, + struct thread_info *ti); +#define ELF_CORE_COPY_REGS(DEST, REGS) \ + dump_elf_thread(DEST, REGS, current_thread_info()); + +/* Similar, but for a thread other than current. */ + +extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task); +#define ELF_CORE_COPY_TASK_REGS(TASK, DEST) \ + dump_elf_task(*(DEST), TASK) + +/* Similar, but for the FP registers. */ + +extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task); +#define ELF_CORE_COPY_FPREGS(TASK, DEST) \ + dump_elf_task_fp(*(DEST), TASK) + +/* This yields a mask that user programs can use to figure out what + instruction set this CPU supports. This is trivial on Alpha, + but not so on other machines. */ + +#define ELF_HWCAP (~amask(-1)) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM \ +({ \ + enum implver_enum i_ = implver(); \ + ( i_ == IMPLVER_EV4 ? "ev4" \ + : i_ == IMPLVER_EV5 \ + ? (amask(AMASK_BWX) ? "ev5" : "ev56") \ + : amask (AMASK_CIX) ? "ev6" : "ev67"); \ +}) + +#define SET_PERSONALITY(EX, IBCS2) \ + set_personality(((EX).e_flags & EF_ALPHA_32BIT) \ + ? PER_LINUX_32BIT : (IBCS2) ? PER_SVR4 : PER_LINUX) + +extern int alpha_l1i_cacheshape; +extern int alpha_l1d_cacheshape; +extern int alpha_l2_cacheshape; +extern int alpha_l3_cacheshape; + +/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ +#define ARCH_DLINFO \ + do { \ + NEW_AUX_ENT(AT_L1I_CACHESHAPE, alpha_l1i_cacheshape); \ + NEW_AUX_ENT(AT_L1D_CACHESHAPE, alpha_l1d_cacheshape); \ + NEW_AUX_ENT(AT_L2_CACHESHAPE, alpha_l2_cacheshape); \ + NEW_AUX_ENT(AT_L3_CACHESHAPE, alpha_l3_cacheshape); \ + } while (0) + +#endif /* __ASM_ALPHA_ELF_H */ diff --git a/arch/alpha/include/asm/emergency-restart.h b/arch/alpha/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/alpha/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include <asm-generic/emergency-restart.h> + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/alpha/include/asm/err_common.h b/arch/alpha/include/asm/err_common.h new file mode 100644 index 000000000000..c25095942107 --- /dev/null +++ b/arch/alpha/include/asm/err_common.h @@ -0,0 +1,118 @@ +/* + * linux/include/asm-alpha/err_common.h + * + * Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation) + * + * Contains declarations and macros to support Alpha error handling + * implementations. + */ + +#ifndef __ALPHA_ERR_COMMON_H +#define __ALPHA_ERR_COMMON_H 1 + +/* + * SCB Vector definitions + */ +#define SCB_Q_SYSERR 0x620 +#define SCB_Q_PROCERR 0x630 +#define SCB_Q_SYSMCHK 0x660 +#define SCB_Q_PROCMCHK 0x670 +#define SCB_Q_SYSEVENT 0x680 + +/* + * Disposition definitions for logout frame parser + */ +#define MCHK_DISPOSITION_UNKNOWN_ERROR 0x00 +#define MCHK_DISPOSITION_REPORT 0x01 +#define MCHK_DISPOSITION_DISMISS 0x02 + +/* + * Error Log definitions + */ +/* + * Types + */ + +#define EL_CLASS__TERMINATION (0) +# define EL_TYPE__TERMINATION__TERMINATION (0) +#define EL_CLASS__HEADER (5) +# define EL_TYPE__HEADER__SYSTEM_ERROR_FRAME (1) +# define EL_TYPE__HEADER__SYSTEM_EVENT_FRAME (2) +# define EL_TYPE__HEADER__HALT_FRAME (3) +# define EL_TYPE__HEADER__LOGOUT_FRAME (19) +#define EL_CLASS__GENERAL_NOTIFICATION (9) +#define EL_CLASS__PCI_ERROR_FRAME (11) +#define EL_CLASS__REGATTA_FAMILY (12) +# define EL_TYPE__REGATTA__PROCESSOR_ERROR_FRAME (1) +# define EL_TYPE__REGATTA__SYSTEM_ERROR_FRAME (2) +# define EL_TYPE__REGATTA__ENVIRONMENTAL_FRAME (3) +# define EL_TYPE__REGATTA__TITAN_PCHIP0_EXTENDED (8) +# define EL_TYPE__REGATTA__TITAN_PCHIP1_EXTENDED (9) +# define EL_TYPE__REGATTA__TITAN_MEMORY_EXTENDED (10) +# define EL_TYPE__REGATTA__PROCESSOR_DBL_ERROR_HALT (11) +# define EL_TYPE__REGATTA__SYSTEM_DBL_ERROR_HALT (12) +#define EL_CLASS__PAL (14) +# define EL_TYPE__PAL__LOGOUT_FRAME (1) +# define EL_TYPE__PAL__EV7_PROCESSOR (4) +# define EL_TYPE__PAL__EV7_ZBOX (5) +# define EL_TYPE__PAL__EV7_RBOX (6) +# define EL_TYPE__PAL__EV7_IO (7) +# define EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE (10) +# define EL_TYPE__PAL__ENV__AIRMOVER_FAN (11) +# define EL_TYPE__PAL__ENV__VOLTAGE (12) +# define EL_TYPE__PAL__ENV__INTRUSION (13) +# define EL_TYPE__PAL__ENV__POWER_SUPPLY (14) +# define EL_TYPE__PAL__ENV__LAN (15) +# define EL_TYPE__PAL__ENV__HOT_PLUG (16) + +union el_timestamp { + struct { + u8 second; + u8 minute; + u8 hour; + u8 day; + u8 month; + u8 year; + } b; + u64 as_int; +}; + +struct el_subpacket { + u16 length; /* length of header (in bytes) */ + u16 class; /* header class and type... */ + u16 type; /* ...determine content */ + u16 revision; /* header revision */ + union { + struct { /* Class 5, Type 1 - System Error */ + u32 frame_length; + u32 frame_packet_count; + } sys_err; + struct { /* Class 5, Type 2 - System Event */ + union el_timestamp timestamp; + u32 frame_length; + u32 frame_packet_count; + } sys_event; + struct { /* Class 5, Type 3 - Double Error Halt */ + u16 halt_code; + u16 reserved; + union el_timestamp timestamp; + u32 frame_length; + u32 frame_packet_count; + } err_halt; + struct { /* Clasee 5, Type 19 - Logout Frame Header */ + u32 frame_length; + u32 frame_flags; + u32 cpu_offset; + u32 system_offset; + } logout_header; + struct { /* Class 12 - Regatta */ + u64 cpuid; + u64 data_start[1]; + } regatta_frame; + struct { /* Raw */ + u64 data_start[1]; + } raw; + } by_type; +}; + +#endif /* __ALPHA_ERR_COMMON_H */ diff --git a/arch/alpha/include/asm/err_ev6.h b/arch/alpha/include/asm/err_ev6.h new file mode 100644 index 000000000000..ea637791e4a9 --- /dev/null +++ b/arch/alpha/include/asm/err_ev6.h @@ -0,0 +1,6 @@ +#ifndef __ALPHA_ERR_EV6_H +#define __ALPHA_ERR_EV6_H 1 + +/* Dummy include for now. */ + +#endif /* __ALPHA_ERR_EV6_H */ diff --git a/arch/alpha/include/asm/err_ev7.h b/arch/alpha/include/asm/err_ev7.h new file mode 100644 index 000000000000..87f99777c2e4 --- /dev/null +++ b/arch/alpha/include/asm/err_ev7.h @@ -0,0 +1,202 @@ +#ifndef __ALPHA_ERR_EV7_H +#define __ALPHA_ERR_EV7_H 1 + +/* + * Data for el packet class PAL (14), type LOGOUT_FRAME (1) + */ +struct ev7_pal_logout_subpacket { + u32 mchk_code; + u32 subpacket_count; + u64 whami; + u64 rbox_whami; + u64 rbox_int; + u64 exc_addr; + union el_timestamp timestamp; + u64 halt_code; + u64 reserved; +}; + +/* + * Data for el packet class PAL (14), type EV7_PROCESSOR (4) + */ +struct ev7_pal_processor_subpacket { + u64 i_stat; + u64 dc_stat; + u64 c_addr; + u64 c_syndrome_1; + u64 c_syndrome_0; + u64 c_stat; + u64 c_sts; + u64 mm_stat; + u64 exc_addr; + u64 ier_cm; + u64 isum; + u64 pal_base; + u64 i_ctl; + u64 process_context; + u64 cbox_ctl; + u64 cbox_stp_ctl; + u64 cbox_acc_ctl; + u64 cbox_lcl_set; + u64 cbox_gbl_set; + u64 bbox_ctl; + u64 bbox_err_sts; + u64 bbox_err_idx; + u64 cbox_ddp_err_sts; + u64 bbox_dat_rmp; + u64 reserved[2]; +}; + +/* + * Data for el packet class PAL (14), type EV7_ZBOX (5) + */ +struct ev7_pal_zbox_subpacket { + u32 zbox0_dram_err_status_1; + u32 zbox0_dram_err_status_2; + u32 zbox0_dram_err_status_3; + u32 zbox0_dram_err_ctl; + u32 zbox0_dram_err_adr; + u32 zbox0_dift_timeout; + u32 zbox0_dram_mapper_ctl; + u32 zbox0_frc_err_adr; + u32 zbox0_dift_err_status; + u32 reserved1; + u32 zbox1_dram_err_status_1; + u32 zbox1_dram_err_status_2; + u32 zbox1_dram_err_status_3; + u32 zbox1_dram_err_ctl; + u32 zbox1_dram_err_adr; + u32 zbox1_dift_timeout; + u32 zbox1_dram_mapper_ctl; + u32 zbox1_frc_err_adr; + u32 zbox1_dift_err_status; + u32 reserved2; + u64 cbox_ctl; + u64 cbox_stp_ctl; + u64 zbox0_error_pa; + u64 zbox1_error_pa; + u64 zbox0_ored_syndrome; + u64 zbox1_ored_syndrome; + u64 reserved3[2]; +}; + +/* + * Data for el packet class PAL (14), type EV7_RBOX (6) + */ +struct ev7_pal_rbox_subpacket { + u64 rbox_cfg; + u64 rbox_n_cfg; + u64 rbox_s_cfg; + u64 rbox_e_cfg; + u64 rbox_w_cfg; + u64 rbox_n_err; + u64 rbox_s_err; + u64 rbox_e_err; + u64 rbox_w_err; + u64 rbox_io_cfg; + u64 rbox_io_err; + u64 rbox_l_err; + u64 rbox_whoami; + u64 rbox_imask; + u64 rbox_intq; + u64 rbox_int; + u64 reserved[2]; +}; + +/* + * Data for el packet class PAL (14), type EV7_IO (7) + */ +struct ev7_pal_io_one_port { + u64 pox_err_sum; + u64 pox_tlb_err; + u64 pox_spl_cmplt; + u64 pox_trans_sum; + u64 pox_first_err; + u64 pox_mult_err; + u64 pox_dm_source; + u64 pox_dm_dest; + u64 pox_dm_size; + u64 pox_dm_ctrl; + u64 reserved; +}; + +struct ev7_pal_io_subpacket { + u64 io_asic_rev; + u64 io_sys_rev; + u64 io7_uph; + u64 hpi_ctl; + u64 crd_ctl; + u64 hei_ctl; + u64 po7_error_sum; + u64 po7_uncrr_sym; + u64 po7_crrct_sym; + u64 po7_ugbge_sym; + u64 po7_err_pkt0; + u64 po7_err_pkt1; + u64 reserved[2]; + struct ev7_pal_io_one_port ports[4]; +}; + +/* + * Environmental subpacket. Data used for el packets: + * class PAL (14), type AMBIENT_TEMPERATURE (10) + * class PAL (14), type AIRMOVER_FAN (11) + * class PAL (14), type VOLTAGE (12) + * class PAL (14), type INTRUSION (13) + * class PAL (14), type POWER_SUPPLY (14) + * class PAL (14), type LAN (15) + * class PAL (14), type HOT_PLUG (16) + */ +struct ev7_pal_environmental_subpacket { + u16 cabinet; + u16 drawer; + u16 reserved1[2]; + u8 module_type; + u8 unit_id; /* unit reporting condition */ + u8 reserved2; + u8 condition; /* condition reported */ +}; + +/* + * Convert environmental type to index + */ +static inline int ev7_lf_env_index(int type) +{ + BUG_ON((type < EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE) + || (type > EL_TYPE__PAL__ENV__HOT_PLUG)); + + return type - EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE; +} + +/* + * Data for generic el packet class PAL. + */ +struct ev7_pal_subpacket { + union { + struct ev7_pal_logout_subpacket logout; /* Type 1 */ + struct ev7_pal_processor_subpacket ev7; /* Type 4 */ + struct ev7_pal_zbox_subpacket zbox; /* Type 5 */ + struct ev7_pal_rbox_subpacket rbox; /* Type 6 */ + struct ev7_pal_io_subpacket io; /* Type 7 */ + struct ev7_pal_environmental_subpacket env; /* Type 10-16 */ + u64 as_quad[1]; /* Raw u64 */ + } by_type; +}; + +/* + * Struct to contain collected logout from subpackets. + */ +struct ev7_lf_subpackets { + struct ev7_pal_logout_subpacket *logout; /* Type 1 */ + struct ev7_pal_processor_subpacket *ev7; /* Type 4 */ + struct ev7_pal_zbox_subpacket *zbox; /* Type 5 */ + struct ev7_pal_rbox_subpacket *rbox; /* Type 6 */ + struct ev7_pal_io_subpacket *io; /* Type 7 */ + struct ev7_pal_environmental_subpacket *env[7]; /* Type 10-16 */ + + unsigned int io_pid; +}; + +#endif /* __ALPHA_ERR_EV7_H */ + + diff --git a/arch/alpha/include/asm/errno.h b/arch/alpha/include/asm/errno.h new file mode 100644 index 000000000000..69e2655249d2 --- /dev/null +++ b/arch/alpha/include/asm/errno.h @@ -0,0 +1,123 @@ +#ifndef _ALPHA_ERRNO_H +#define _ALPHA_ERRNO_H + +#include <asm-generic/errno-base.h> + +#undef EAGAIN /* 11 in errno-base.h */ + +#define EDEADLK 11 /* Resource deadlock would occur */ + +#define EAGAIN 35 /* Try again */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define EINPROGRESS 36 /* Operation now in progress */ +#define EALREADY 37 /* Operation already in progress */ +#define ENOTSOCK 38 /* Socket operation on non-socket */ +#define EDESTADDRREQ 39 /* Destination address required */ +#define EMSGSIZE 40 /* Message too long */ +#define EPROTOTYPE 41 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 42 /* Protocol not available */ +#define EPROTONOSUPPORT 43 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 44 /* Socket type not supported */ +#define EOPNOTSUPP 45 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 46 /* Protocol family not supported */ +#define EAFNOSUPPORT 47 /* Address family not supported by protocol */ +#define EADDRINUSE 48 /* Address already in use */ +#define EADDRNOTAVAIL 49 /* Cannot assign requested address */ +#define ENETDOWN 50 /* Network is down */ +#define ENETUNREACH 51 /* Network is unreachable */ +#define ENETRESET 52 /* Network dropped connection because of reset */ +#define ECONNABORTED 53 /* Software caused connection abort */ +#define ECONNRESET 54 /* Connection reset by peer */ +#define ENOBUFS 55 /* No buffer space available */ +#define EISCONN 56 /* Transport endpoint is already connected */ +#define ENOTCONN 57 /* Transport endpoint is not connected */ +#define ESHUTDOWN 58 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 59 /* Too many references: cannot splice */ +#define ETIMEDOUT 60 /* Connection timed out */ +#define ECONNREFUSED 61 /* Connection refused */ +#define ELOOP 62 /* Too many symbolic links encountered */ +#define ENAMETOOLONG 63 /* File name too long */ +#define EHOSTDOWN 64 /* Host is down */ +#define EHOSTUNREACH 65 /* No route to host */ +#define ENOTEMPTY 66 /* Directory not empty */ + +#define EUSERS 68 /* Too many users */ +#define EDQUOT 69 /* Quota exceeded */ +#define ESTALE 70 /* Stale NFS file handle */ +#define EREMOTE 71 /* Object is remote */ + +#define ENOLCK 77 /* No record locks available */ +#define ENOSYS 78 /* Function not implemented */ + +#define ENOMSG 80 /* No message of desired type */ +#define EIDRM 81 /* Identifier removed */ +#define ENOSR 82 /* Out of streams resources */ +#define ETIME 83 /* Timer expired */ +#define EBADMSG 84 /* Not a data message */ +#define EPROTO 85 /* Protocol error */ +#define ENODATA 86 /* No data available */ +#define ENOSTR 87 /* Device not a stream */ + +#define ENOPKG 92 /* Package not installed */ + +#define EILSEQ 116 /* Illegal byte sequence */ + +/* The following are just random noise.. */ +#define ECHRNG 88 /* Channel number out of range */ +#define EL2NSYNC 89 /* Level 2 not synchronized */ +#define EL3HLT 90 /* Level 3 halted */ +#define EL3RST 91 /* Level 3 reset */ + +#define ELNRNG 93 /* Link number out of range */ +#define EUNATCH 94 /* Protocol driver not attached */ +#define ENOCSI 95 /* No CSI structure available */ +#define EL2HLT 96 /* Level 2 halted */ +#define EBADE 97 /* Invalid exchange */ +#define EBADR 98 /* Invalid request descriptor */ +#define EXFULL 99 /* Exchange full */ +#define ENOANO 100 /* No anode */ +#define EBADRQC 101 /* Invalid request code */ +#define EBADSLT 102 /* Invalid slot */ + +#define EDEADLOCK EDEADLK + +#define EBFONT 104 /* Bad font file format */ +#define ENONET 105 /* Machine is not on the network */ +#define ENOLINK 106 /* Link has been severed */ +#define EADV 107 /* Advertise error */ +#define ESRMNT 108 /* Srmount error */ +#define ECOMM 109 /* Communication error on send */ +#define EMULTIHOP 110 /* Multihop attempted */ +#define EDOTDOT 111 /* RFS specific error */ +#define EOVERFLOW 112 /* Value too large for defined data type */ +#define ENOTUNIQ 113 /* Name not unique on network */ +#define EBADFD 114 /* File descriptor in bad state */ +#define EREMCHG 115 /* Remote address changed */ + +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ + +#define ELIBACC 122 /* Can not access a needed shared library */ +#define ELIBBAD 123 /* Accessing a corrupted shared library */ +#define ELIBSCN 124 /* .lib section in a.out corrupted */ +#define ELIBMAX 125 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 126 /* Cannot exec a shared library directly */ +#define ERESTART 127 /* Interrupted system call should be restarted */ +#define ESTRPIPE 128 /* Streams pipe error */ + +#define ENOMEDIUM 129 /* No medium found */ +#define EMEDIUMTYPE 130 /* Wrong medium type */ +#define ECANCELED 131 /* Operation Cancelled */ +#define ENOKEY 132 /* Required key not available */ +#define EKEYEXPIRED 133 /* Key has expired */ +#define EKEYREVOKED 134 /* Key has been revoked */ +#define EKEYREJECTED 135 /* Key was rejected by service */ + +/* for robust mutexes */ +#define EOWNERDEAD 136 /* Owner died */ +#define ENOTRECOVERABLE 137 /* State not recoverable */ + +#endif diff --git a/arch/alpha/include/asm/fb.h b/arch/alpha/include/asm/fb.h new file mode 100644 index 000000000000..fa9bbb96b2b3 --- /dev/null +++ b/arch/alpha/include/asm/fb.h @@ -0,0 +1,13 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ +#include <linux/device.h> + +/* Caching is off in the I/O space quadrant by design. */ +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h new file mode 100644 index 000000000000..25da0017ec87 --- /dev/null +++ b/arch/alpha/include/asm/fcntl.h @@ -0,0 +1,43 @@ +#ifndef _ALPHA_FCNTL_H +#define _ALPHA_FCNTL_H + +/* open/fcntl - O_SYNC is only implemented on blocks devices and on files + located on an ext2 file system */ +#define O_CREAT 01000 /* not fcntl */ +#define O_TRUNC 02000 /* not fcntl */ +#define O_EXCL 04000 /* not fcntl */ +#define O_NOCTTY 010000 /* not fcntl */ + +#define O_NONBLOCK 00004 +#define O_APPEND 00010 +#define O_SYNC 040000 +#define O_DIRECTORY 0100000 /* must be a directory */ +#define O_NOFOLLOW 0200000 /* don't follow links */ +#define O_LARGEFILE 0400000 /* will be set by the kernel on every open */ +#define O_DIRECT 02000000 /* direct disk access - should check with OSF/1 */ +#define O_NOATIME 04000000 +#define O_CLOEXEC 010000000 /* set close_on_exec */ + +#define F_GETLK 7 +#define F_SETLK 8 +#define F_SETLKW 9 + +#define F_SETOWN 5 /* for sockets. */ +#define F_GETOWN 6 /* for sockets. */ +#define F_SETSIG 10 /* for sockets. */ +#define F_GETSIG 11 /* for sockets. */ + +/* for posix fcntl() and lockf() */ +#define F_RDLCK 1 +#define F_WRLCK 2 +#define F_UNLCK 8 + +/* for old implementation of bsd flock () */ +#define F_EXLCK 16 /* or 3 */ +#define F_SHLCK 32 /* or 4 */ + +#define F_INPROGRESS 64 + +#include <asm-generic/fcntl.h> + +#endif diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h new file mode 100644 index 000000000000..0be50413b2b5 --- /dev/null +++ b/arch/alpha/include/asm/floppy.h @@ -0,0 +1,115 @@ +/* + * Architecture specific parts of the Floppy driver + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 + */ +#ifndef __ASM_ALPHA_FLOPPY_H +#define __ASM_ALPHA_FLOPPY_H + + +#define fd_inb(port) inb_p(port) +#define fd_outb(value,port) outb_p(value,port) + +#define fd_enable_dma() enable_dma(FLOPPY_DMA) +#define fd_disable_dma() disable_dma(FLOPPY_DMA) +#define fd_request_dma() request_dma(FLOPPY_DMA,"floppy") +#define fd_free_dma() free_dma(FLOPPY_DMA) +#define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA) +#define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA,mode) +#define fd_set_dma_addr(addr) set_dma_addr(FLOPPY_DMA,virt_to_bus(addr)) +#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count) +#define fd_enable_irq() enable_irq(FLOPPY_IRQ) +#define fd_disable_irq() disable_irq(FLOPPY_IRQ) +#define fd_cacheflush(addr,size) /* nothing */ +#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt,\ + IRQF_DISABLED, "floppy", NULL) +#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); + +#ifdef CONFIG_PCI + +#include <linux/pci.h> + +#define fd_dma_setup(addr,size,mode,io) alpha_fd_dma_setup(addr,size,mode,io) + +static __inline__ int +alpha_fd_dma_setup(char *addr, unsigned long size, int mode, int io) +{ + static unsigned long prev_size; + static dma_addr_t bus_addr = 0; + static char *prev_addr; + static int prev_dir; + int dir; + + dir = (mode != DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE; + + if (bus_addr + && (addr != prev_addr || size != prev_size || dir != prev_dir)) { + /* different from last time -- unmap prev */ + pci_unmap_single(isa_bridge, bus_addr, prev_size, prev_dir); + bus_addr = 0; + } + + if (!bus_addr) /* need to map it */ + bus_addr = pci_map_single(isa_bridge, addr, size, dir); + + /* remember this one as prev */ + prev_addr = addr; + prev_size = size; + prev_dir = dir; + + fd_clear_dma_ff(); + fd_cacheflush(addr, size); + fd_set_dma_mode(mode); + set_dma_addr(FLOPPY_DMA, bus_addr); + fd_set_dma_count(size); + virtual_dma_port = io; + fd_enable_dma(); + + return 0; +} + +#endif /* CONFIG_PCI */ + +__inline__ void virtual_dma_init(void) +{ + /* Nothing to do on an Alpha */ +} + +static int FDC1 = 0x3f0; +static int FDC2 = -1; + +/* + * Again, the CMOS information doesn't work on the alpha.. + */ +#define FLOPPY0_TYPE 6 +#define FLOPPY1_TYPE 0 + +#define N_FDC 2 +#define N_DRIVE 8 + +/* + * Most Alphas have no problems with floppy DMA crossing 64k borders, + * except for certain ones, like XL and RUFFIAN. + * + * However, the test is simple and fast, and this *is* floppy, after all, + * so we do it for all platforms, just to make sure. + * + * This is advantageous in other circumstances as well, as in moving + * about the PCI DMA windows and forcing the floppy to start doing + * scatter-gather when it never had before, and there *is* a problem + * on that platform... ;-} + */ + +static inline unsigned long CROSS_64KB(void *a, unsigned long s) +{ + unsigned long p = (unsigned long)a; + return ((p + s - 1) ^ p) & ~0xffffUL; +} + +#define EXTRA_FLOPPY_PARAMS + +#endif /* __ASM_ALPHA_FLOPPY_H */ diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h new file mode 100644 index 000000000000..ecb17a72acc3 --- /dev/null +++ b/arch/alpha/include/asm/fpu.h @@ -0,0 +1,193 @@ +#ifndef __ASM_ALPHA_FPU_H +#define __ASM_ALPHA_FPU_H + +/* + * Alpha floating-point control register defines: + */ +#define FPCR_DNOD (1UL<<47) /* denorm INV trap disable */ +#define FPCR_DNZ (1UL<<48) /* denorms to zero */ +#define FPCR_INVD (1UL<<49) /* invalid op disable (opt.) */ +#define FPCR_DZED (1UL<<50) /* division by zero disable (opt.) */ +#define FPCR_OVFD (1UL<<51) /* overflow disable (optional) */ +#define FPCR_INV (1UL<<52) /* invalid operation */ +#define FPCR_DZE (1UL<<53) /* division by zero */ +#define FPCR_OVF (1UL<<54) /* overflow */ +#define FPCR_UNF (1UL<<55) /* underflow */ +#define FPCR_INE (1UL<<56) /* inexact */ +#define FPCR_IOV (1UL<<57) /* integer overflow */ +#define FPCR_UNDZ (1UL<<60) /* underflow to zero (opt.) */ +#define FPCR_UNFD (1UL<<61) /* underflow disable (opt.) */ +#define FPCR_INED (1UL<<62) /* inexact disable (opt.) */ +#define FPCR_SUM (1UL<<63) /* summary bit */ + +#define FPCR_DYN_SHIFT 58 /* first dynamic rounding mode bit */ +#define FPCR_DYN_CHOPPED (0x0UL << FPCR_DYN_SHIFT) /* towards 0 */ +#define FPCR_DYN_MINUS (0x1UL << FPCR_DYN_SHIFT) /* towards -INF */ +#define FPCR_DYN_NORMAL (0x2UL << FPCR_DYN_SHIFT) /* towards nearest */ +#define FPCR_DYN_PLUS (0x3UL << FPCR_DYN_SHIFT) /* towards +INF */ +#define FPCR_DYN_MASK (0x3UL << FPCR_DYN_SHIFT) + +#define FPCR_MASK 0xffff800000000000L + +/* + * IEEE trap enables are implemented in software. These per-thread + * bits are stored in the "ieee_state" field of "struct thread_info". + * Thus, the bits are defined so as not to conflict with the + * floating-point enable bit (which is architected). On top of that, + * we want to make these bits compatible with OSF/1 so + * ieee_set_fp_control() etc. can be implemented easily and + * compatibly. The corresponding definitions are in + * /usr/include/machine/fpu.h under OSF/1. + */ +#define IEEE_TRAP_ENABLE_INV (1UL<<1) /* invalid op */ +#define IEEE_TRAP_ENABLE_DZE (1UL<<2) /* division by zero */ +#define IEEE_TRAP_ENABLE_OVF (1UL<<3) /* overflow */ +#define IEEE_TRAP_ENABLE_UNF (1UL<<4) /* underflow */ +#define IEEE_TRAP_ENABLE_INE (1UL<<5) /* inexact */ +#define IEEE_TRAP_ENABLE_DNO (1UL<<6) /* denorm */ +#define IEEE_TRAP_ENABLE_MASK (IEEE_TRAP_ENABLE_INV | IEEE_TRAP_ENABLE_DZE |\ + IEEE_TRAP_ENABLE_OVF | IEEE_TRAP_ENABLE_UNF |\ + IEEE_TRAP_ENABLE_INE | IEEE_TRAP_ENABLE_DNO) + +/* Denorm and Underflow flushing */ +#define IEEE_MAP_DMZ (1UL<<12) /* Map denorm inputs to zero */ +#define IEEE_MAP_UMZ (1UL<<13) /* Map underflowed outputs to zero */ + +#define IEEE_MAP_MASK (IEEE_MAP_DMZ | IEEE_MAP_UMZ) + +/* status bits coming from fpcr: */ +#define IEEE_STATUS_INV (1UL<<17) +#define IEEE_STATUS_DZE (1UL<<18) +#define IEEE_STATUS_OVF (1UL<<19) +#define IEEE_STATUS_UNF (1UL<<20) +#define IEEE_STATUS_INE (1UL<<21) +#define IEEE_STATUS_DNO (1UL<<22) + +#define IEEE_STATUS_MASK (IEEE_STATUS_INV | IEEE_STATUS_DZE | \ + IEEE_STATUS_OVF | IEEE_STATUS_UNF | \ + IEEE_STATUS_INE | IEEE_STATUS_DNO) + +#define IEEE_SW_MASK (IEEE_TRAP_ENABLE_MASK | \ + IEEE_STATUS_MASK | IEEE_MAP_MASK) + +#define IEEE_CURRENT_RM_SHIFT 32 +#define IEEE_CURRENT_RM_MASK (3UL<<IEEE_CURRENT_RM_SHIFT) + +#define IEEE_STATUS_TO_EXCSUM_SHIFT 16 + +#define IEEE_INHERIT (1UL<<63) /* inherit on thread create? */ + +/* + * Convert the software IEEE trap enable and status bits into the + * hardware fpcr format. + * + * Digital Unix engineers receive my thanks for not defining the + * software bits identical to the hardware bits. The chip designers + * receive my thanks for making all the not-implemented fpcr bits + * RAZ forcing us to use system calls to read/write this value. + */ + +static inline unsigned long +ieee_swcr_to_fpcr(unsigned long sw) +{ + unsigned long fp; + fp = (sw & IEEE_STATUS_MASK) << 35; + fp |= (sw & IEEE_MAP_DMZ) << 36; + fp |= (sw & IEEE_STATUS_MASK ? FPCR_SUM : 0); + fp |= (~sw & (IEEE_TRAP_ENABLE_INV + | IEEE_TRAP_ENABLE_DZE + | IEEE_TRAP_ENABLE_OVF)) << 48; + fp |= (~sw & (IEEE_TRAP_ENABLE_UNF | IEEE_TRAP_ENABLE_INE)) << 57; + fp |= (sw & IEEE_MAP_UMZ ? FPCR_UNDZ | FPCR_UNFD : 0); + fp |= (~sw & IEEE_TRAP_ENABLE_DNO) << 41; + return fp; +} + +static inline unsigned long +ieee_fpcr_to_swcr(unsigned long fp) +{ + unsigned long sw; + sw = (fp >> 35) & IEEE_STATUS_MASK; + sw |= (fp >> 36) & IEEE_MAP_DMZ; + sw |= (~fp >> 48) & (IEEE_TRAP_ENABLE_INV + | IEEE_TRAP_ENABLE_DZE + | IEEE_TRAP_ENABLE_OVF); + sw |= (~fp >> 57) & (IEEE_TRAP_ENABLE_UNF | IEEE_TRAP_ENABLE_INE); + sw |= (fp >> 47) & IEEE_MAP_UMZ; + sw |= (~fp >> 41) & IEEE_TRAP_ENABLE_DNO; + return sw; +} + +#ifdef __KERNEL__ + +/* The following two functions don't need trapb/excb instructions + around the mf_fpcr/mt_fpcr instructions because (a) the kernel + never generates arithmetic faults and (b) call_pal instructions + are implied trap barriers. */ + +static inline unsigned long +rdfpcr(void) +{ + unsigned long tmp, ret; + +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) + __asm__ __volatile__ ( + "ftoit $f0,%0\n\t" + "mf_fpcr $f0\n\t" + "ftoit $f0,%1\n\t" + "itoft %0,$f0" + : "=r"(tmp), "=r"(ret)); +#else + __asm__ __volatile__ ( + "stt $f0,%0\n\t" + "mf_fpcr $f0\n\t" + "stt $f0,%1\n\t" + "ldt $f0,%0" + : "=m"(tmp), "=m"(ret)); +#endif + + return ret; +} + +static inline void +wrfpcr(unsigned long val) +{ + unsigned long tmp; + +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) + __asm__ __volatile__ ( + "ftoit $f0,%0\n\t" + "itoft %1,$f0\n\t" + "mt_fpcr $f0\n\t" + "itoft %0,$f0" + : "=&r"(tmp) : "r"(val)); +#else + __asm__ __volatile__ ( + "stt $f0,%0\n\t" + "ldt $f0,%1\n\t" + "mt_fpcr $f0\n\t" + "ldt $f0,%0" + : "=m"(tmp) : "m"(val)); +#endif +} + +static inline unsigned long +swcr_update_status(unsigned long swcr, unsigned long fpcr) +{ + /* EV6 implements most of the bits in hardware. Collect + the acrued exception bits from the real fpcr. */ + if (implver() == IMPLVER_EV6) { + swcr &= ~IEEE_STATUS_MASK; + swcr |= (fpcr >> 35) & IEEE_STATUS_MASK; + } + return swcr; +} + +extern unsigned long alpha_read_fp_reg (unsigned long reg); +extern void alpha_write_fp_reg (unsigned long reg, unsigned long val); +extern unsigned long alpha_read_fp_reg_s (unsigned long reg); +extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_ALPHA_FPU_H */ diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h new file mode 100644 index 000000000000..6a332a9f099c --- /dev/null +++ b/arch/alpha/include/asm/futex.h @@ -0,0 +1,6 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include <asm-generic/futex.h> + +#endif diff --git a/arch/alpha/include/asm/gct.h b/arch/alpha/include/asm/gct.h new file mode 100644 index 000000000000..3504c704927c --- /dev/null +++ b/arch/alpha/include/asm/gct.h @@ -0,0 +1,58 @@ +#ifndef __ALPHA_GCT_H +#define __ALPHA_GCT_H + +typedef u64 gct_id; +typedef u64 gct6_handle; + +typedef struct __gct6_node { + u8 type; + u8 subtype; + u16 size; + u32 hd_extension; + gct6_handle owner; + gct6_handle active_user; + gct_id id; + u64 flags; + u16 rev; + u16 change_counter; + u16 max_child; + u16 reserved1; + gct6_handle saved_owner; + gct6_handle affinity; + gct6_handle parent; + gct6_handle next; + gct6_handle prev; + gct6_handle child; + u64 fw_flags; + u64 os_usage; + u64 fru_id; + u32 checksum; + u32 magic; /* 'GLXY' */ +} gct6_node; + +typedef struct { + u8 type; + u8 subtype; + void (*callout)(gct6_node *); +} gct6_search_struct; + +#define GCT_NODE_MAGIC 0x59584c47 /* 'GLXY' */ + +/* + * node types + */ +#define GCT_TYPE_HOSE 0x0E + +/* + * node subtypes + */ +#define GCT_SUBTYPE_IO_PORT_MODULE 0x2C + +#define GCT_NODE_PTR(off) ((gct6_node *)((char *)hwrpb + \ + hwrpb->frut_offset + \ + (gct6_handle)(off))) \ + +int gct6_find_nodes(gct6_node *, gct6_search_struct *); + +#endif /* __ALPHA_GCT_H */ + diff --git a/arch/alpha/include/asm/gentrap.h b/arch/alpha/include/asm/gentrap.h new file mode 100644 index 000000000000..ae50cc3192c7 --- /dev/null +++ b/arch/alpha/include/asm/gentrap.h @@ -0,0 +1,37 @@ +#ifndef _ASMAXP_GENTRAP_H +#define _ASMAXP_GENTRAP_H + +/* + * Definitions for gentrap causes. They are generated by user-level + * programs and therefore should be compatible with the corresponding + * OSF/1 definitions. + */ +#define GEN_INTOVF -1 /* integer overflow */ +#define GEN_INTDIV -2 /* integer division by zero */ +#define GEN_FLTOVF -3 /* fp overflow */ +#define GEN_FLTDIV -4 /* fp division by zero */ +#define GEN_FLTUND -5 /* fp underflow */ +#define GEN_FLTINV -6 /* invalid fp operand */ +#define GEN_FLTINE -7 /* inexact fp operand */ +#define GEN_DECOVF -8 /* decimal overflow (for COBOL??) */ +#define GEN_DECDIV -9 /* decimal division by zero */ +#define GEN_DECINV -10 /* invalid decimal operand */ +#define GEN_ROPRAND -11 /* reserved operand */ +#define GEN_ASSERTERR -12 /* assertion error */ +#define GEN_NULPTRERR -13 /* null pointer error */ +#define GEN_STKOVF -14 /* stack overflow */ +#define GEN_STRLENERR -15 /* string length error */ +#define GEN_SUBSTRERR -16 /* substring error */ +#define GEN_RANGERR -17 /* range error */ +#define GEN_SUBRNG -18 +#define GEN_SUBRNG1 -19 +#define GEN_SUBRNG2 -20 +#define GEN_SUBRNG3 -21 /* these report range errors for */ +#define GEN_SUBRNG4 -22 /* subscripting (indexing) at levels 0..7 */ +#define GEN_SUBRNG5 -23 +#define GEN_SUBRNG6 -24 +#define GEN_SUBRNG7 -25 + +/* the remaining codes (-26..-1023) are reserved. */ + +#endif /* _ASMAXP_GENTRAP_H */ diff --git a/arch/alpha/include/asm/hardirq.h b/arch/alpha/include/asm/hardirq.h new file mode 100644 index 000000000000..d953e234daa8 --- /dev/null +++ b/arch/alpha/include/asm/hardirq.h @@ -0,0 +1,30 @@ +#ifndef _ALPHA_HARDIRQ_H +#define _ALPHA_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/cache.h> + + +/* entry.S is sensitive to the offsets of these fields */ +typedef struct { + unsigned long __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +void ack_bad_irq(unsigned int irq); + +#define HARDIRQ_BITS 12 + +/* + * The hardirq mask has to be large enough to have + * space for potentially nestable IRQ sources in the system + * to nest on a single CPU. On Alpha, interrupts are masked at the CPU + * by IPL as well as at the system level. We only have 8 IPLs (UNIX PALcode) + * so we really only have 8 nestable IRQs, but allow some overhead + */ +#if (1 << HARDIRQ_BITS) < 16 +#error HARDIRQ_BITS is too low! +#endif + +#endif /* _ALPHA_HARDIRQ_H */ diff --git a/arch/alpha/include/asm/hw_irq.h b/arch/alpha/include/asm/hw_irq.h new file mode 100644 index 000000000000..a37db0f95092 --- /dev/null +++ b/arch/alpha/include/asm/hw_irq.h @@ -0,0 +1,13 @@ +#ifndef _ALPHA_HW_IRQ_H +#define _ALPHA_HW_IRQ_H + + +extern volatile unsigned long irq_err_count; + +#ifdef CONFIG_ALPHA_GENERIC +#define ACTUAL_NR_IRQS alpha_mv.nr_irqs +#else +#define ACTUAL_NR_IRQS NR_IRQS +#endif + +#endif diff --git a/arch/alpha/include/asm/hwrpb.h b/arch/alpha/include/asm/hwrpb.h new file mode 100644 index 000000000000..8e8f871af7cf --- /dev/null +++ b/arch/alpha/include/asm/hwrpb.h @@ -0,0 +1,220 @@ +#ifndef __ALPHA_HWRPB_H +#define __ALPHA_HWRPB_H + +#define INIT_HWRPB ((struct hwrpb_struct *) 0x10000000) + +/* + * DEC processor types for Alpha systems. Found in HWRPB. + * These values are architected. + */ + +#define EV3_CPU 1 /* EV3 */ +#define EV4_CPU 2 /* EV4 (21064) */ +#define LCA4_CPU 4 /* LCA4 (21066/21068) */ +#define EV5_CPU 5 /* EV5 (21164) */ +#define EV45_CPU 6 /* EV4.5 (21064/xxx) */ +#define EV56_CPU 7 /* EV5.6 (21164) */ +#define EV6_CPU 8 /* EV6 (21264) */ +#define PCA56_CPU 9 /* PCA56 (21164PC) */ +#define PCA57_CPU 10 /* PCA57 (notyet) */ +#define EV67_CPU 11 /* EV67 (21264A) */ +#define EV68CB_CPU 12 /* EV68CB (21264C) */ +#define EV68AL_CPU 13 /* EV68AL (21264B) */ +#define EV68CX_CPU 14 /* EV68CX (21264D) */ +#define EV7_CPU 15 /* EV7 (21364) */ +#define EV79_CPU 16 /* EV79 (21364??) */ +#define EV69_CPU 17 /* EV69 (21264/EV69A) */ + +/* + * DEC system types for Alpha systems. Found in HWRPB. + * These values are architected. + */ + +#define ST_ADU 1 /* Alpha ADU systype */ +#define ST_DEC_4000 2 /* Cobra systype */ +#define ST_DEC_7000 3 /* Ruby systype */ +#define ST_DEC_3000_500 4 /* Flamingo systype */ +#define ST_DEC_2000_300 6 /* Jensen systype */ +#define ST_DEC_3000_300 7 /* Pelican systype */ +#define ST_DEC_2100_A500 9 /* Sable systype */ +#define ST_DEC_AXPVME_64 10 /* AXPvme system type */ +#define ST_DEC_AXPPCI_33 11 /* NoName system type */ +#define ST_DEC_TLASER 12 /* Turbolaser systype */ +#define ST_DEC_2100_A50 13 /* Avanti systype */ +#define ST_DEC_MUSTANG 14 /* Mustang systype */ +#define ST_DEC_ALCOR 15 /* Alcor (EV5) systype */ +#define ST_DEC_1000 17 /* Mikasa systype */ +#define ST_DEC_EB64 18 /* EB64 systype */ +#define ST_DEC_EB66 19 /* EB66 systype */ +#define ST_DEC_EB64P 20 /* EB64+ systype */ +#define ST_DEC_BURNS 21 /* laptop systype */ +#define ST_DEC_RAWHIDE 22 /* Rawhide systype */ +#define ST_DEC_K2 23 /* K2 systype */ +#define ST_DEC_LYNX 24 /* Lynx systype */ +#define ST_DEC_XL 25 /* Alpha XL systype */ +#define ST_DEC_EB164 26 /* EB164 systype */ +#define ST_DEC_NORITAKE 27 /* Noritake systype */ +#define ST_DEC_CORTEX 28 /* Cortex systype */ +#define ST_DEC_MIATA 30 /* Miata systype */ +#define ST_DEC_XXM 31 /* XXM systype */ +#define ST_DEC_TAKARA 32 /* Takara systype */ +#define ST_DEC_YUKON 33 /* Yukon systype */ +#define ST_DEC_TSUNAMI 34 /* Tsunami systype */ +#define ST_DEC_WILDFIRE 35 /* Wildfire systype */ +#define ST_DEC_CUSCO 36 /* CUSCO systype */ +#define ST_DEC_EIGER 37 /* Eiger systype */ +#define ST_DEC_TITAN 38 /* Titan systype */ +#define ST_DEC_MARVEL 39 /* Marvel systype */ + +/* UNOFFICIAL!!! */ +#define ST_UNOFFICIAL_BIAS 100 +#define ST_DTI_RUFFIAN 101 /* RUFFIAN systype */ + +/* Alpha Processor, Inc. systems */ +#define ST_API_BIAS 200 +#define ST_API_NAUTILUS 201 /* UP1000 systype */ + +struct pcb_struct { + unsigned long ksp; + unsigned long usp; + unsigned long ptbr; + unsigned int pcc; + unsigned int asn; + unsigned long unique; + unsigned long flags; + unsigned long res1, res2; +}; + +struct percpu_struct { + unsigned long hwpcb[16]; + unsigned long flags; + unsigned long pal_mem_size; + unsigned long pal_scratch_size; + unsigned long pal_mem_pa; + unsigned long pal_scratch_pa; + unsigned long pal_revision; + unsigned long type; + unsigned long variation; + unsigned long revision; + unsigned long serial_no[2]; + unsigned long logout_area_pa; + unsigned long logout_area_len; + unsigned long halt_PCBB; + unsigned long halt_PC; + unsigned long halt_PS; + unsigned long halt_arg; + unsigned long halt_ra; + unsigned long halt_pv; + unsigned long halt_reason; + unsigned long res; + unsigned long ipc_buffer[21]; + unsigned long palcode_avail[16]; + unsigned long compatibility; + unsigned long console_data_log_pa; + unsigned long console_data_log_length; + unsigned long bcache_info; +}; + +struct procdesc_struct { + unsigned long weird_vms_stuff; + unsigned long address; +}; + +struct vf_map_struct { + unsigned long va; + unsigned long pa; + unsigned long count; +}; + +struct crb_struct { + struct procdesc_struct * dispatch_va; + struct procdesc_struct * dispatch_pa; + struct procdesc_struct * fixup_va; + struct procdesc_struct * fixup_pa; + /* virtual->physical map */ + unsigned long map_entries; + unsigned long map_pages; + struct vf_map_struct map[1]; +}; + +struct memclust_struct { + unsigned long start_pfn; + unsigned long numpages; + unsigned long numtested; + unsigned long bitmap_va; + unsigned long bitmap_pa; + unsigned long bitmap_chksum; + unsigned long usage; +}; + +struct memdesc_struct { + unsigned long chksum; + unsigned long optional_pa; + unsigned long numclusters; + struct memclust_struct cluster[0]; +}; + +struct dsr_struct { + long smm; /* SMM nubber used by LMF */ + unsigned long lurt_off; /* offset to LURT table */ + unsigned long sysname_off; /* offset to sysname char count */ +}; + +struct hwrpb_struct { + unsigned long phys_addr; /* check: physical address of the hwrpb */ + unsigned long id; /* check: "HWRPB\0\0\0" */ + unsigned long revision; + unsigned long size; /* size of hwrpb */ + unsigned long cpuid; + unsigned long pagesize; /* 8192, I hope */ + unsigned long pa_bits; /* number of physical address bits */ + unsigned long max_asn; + unsigned char ssn[16]; /* system serial number: big bother is watching */ + unsigned long sys_type; + unsigned long sys_variation; + unsigned long sys_revision; + unsigned long intr_freq; /* interval clock frequency * 4096 */ + unsigned long cycle_freq; /* cycle counter frequency */ + unsigned long vptb; /* Virtual Page Table Base address */ + unsigned long res1; + unsigned long tbhb_offset; /* Translation Buffer Hint Block */ + unsigned long nr_processors; + unsigned long processor_size; + unsigned long processor_offset; + unsigned long ctb_nr; + unsigned long ctb_size; /* console terminal block size */ + unsigned long ctbt_offset; /* console terminal block table offset */ + unsigned long crb_offset; /* console callback routine block */ + unsigned long mddt_offset; /* memory data descriptor table */ + unsigned long cdb_offset; /* configuration data block (or NULL) */ + unsigned long frut_offset; /* FRU table (or NULL) */ + void (*save_terminal)(unsigned long); + unsigned long save_terminal_data; + void (*restore_terminal)(unsigned long); + unsigned long restore_terminal_data; + void (*CPU_restart)(unsigned long); + unsigned long CPU_restart_data; + unsigned long res2; + unsigned long res3; + unsigned long chksum; + unsigned long rxrdy; + unsigned long txrdy; + unsigned long dsr_offset; /* "Dynamic System Recognition Data Block Table" */ +}; + +#ifdef __KERNEL__ + +extern struct hwrpb_struct *hwrpb; + +static inline void +hwrpb_update_checksum(struct hwrpb_struct *h) +{ + unsigned long sum = 0, *l; + for (l = (unsigned long *) h; l < (unsigned long *) &h->chksum; ++l) + sum += *l; + h->chksum = sum; +} + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_HWRPB_H */ diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h new file mode 100644 index 000000000000..e971ab000f95 --- /dev/null +++ b/arch/alpha/include/asm/io.h @@ -0,0 +1,577 @@ +#ifndef __ALPHA_IO_H +#define __ALPHA_IO_H + +#ifdef __KERNEL__ + +#include <linux/kernel.h> +#include <linux/mm.h> +#include <asm/compiler.h> +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/machvec.h> +#include <asm/hwrpb.h> + +/* The generic header contains only prototypes. Including it ensures that + the implementation we have here matches that interface. */ +#include <asm-generic/iomap.h> + +/* We don't use IO slowdowns on the Alpha, but.. */ +#define __SLOW_DOWN_IO do { } while (0) +#define SLOW_DOWN_IO do { } while (0) + +/* + * Virtual -> physical identity mapping starts at this offset + */ +#ifdef USE_48_BIT_KSEG +#define IDENT_ADDR 0xffff800000000000UL +#else +#define IDENT_ADDR 0xfffffc0000000000UL +#endif + +/* + * We try to avoid hae updates (thus the cache), but when we + * do need to update the hae, we need to do it atomically, so + * that any interrupts wouldn't get confused with the hae + * register not being up-to-date with respect to the hardware + * value. + */ +extern inline void __set_hae(unsigned long new_hae) +{ + unsigned long flags; + local_irq_save(flags); + + alpha_mv.hae_cache = new_hae; + *alpha_mv.hae_register = new_hae; + mb(); + /* Re-read to make sure it was written. */ + new_hae = *alpha_mv.hae_register; + + local_irq_restore(flags); +} + +extern inline void set_hae(unsigned long new_hae) +{ + if (new_hae != alpha_mv.hae_cache) + __set_hae(new_hae); +} + +/* + * Change virtual addresses to physical addresses and vv. + */ +#ifdef USE_48_BIT_KSEG +static inline unsigned long virt_to_phys(void *address) +{ + return (unsigned long)address - IDENT_ADDR; +} + +static inline void * phys_to_virt(unsigned long address) +{ + return (void *) (address + IDENT_ADDR); +} +#else +static inline unsigned long virt_to_phys(void *address) +{ + unsigned long phys = (unsigned long)address; + + /* Sign-extend from bit 41. */ + phys <<= (64 - 41); + phys = (long)phys >> (64 - 41); + + /* Crop to the physical address width of the processor. */ + phys &= (1ul << hwrpb->pa_bits) - 1; + + return phys; +} + +static inline void * phys_to_virt(unsigned long address) +{ + return (void *)(IDENT_ADDR + (address & ((1ul << 41) - 1))); +} +#endif + +#define page_to_phys(page) page_to_pa(page) + +static inline dma_addr_t __deprecated isa_page_to_bus(struct page *page) +{ + return page_to_phys(page); +} + +/* This depends on working iommu. */ +#define BIO_VMERGE_BOUNDARY (alpha_mv.mv_pci_tbi ? PAGE_SIZE : 0) + +/* Maximum PIO space address supported? */ +#define IO_SPACE_LIMIT 0xffff + +/* + * Change addresses as seen by the kernel (virtual) to addresses as + * seen by a device (bus), and vice versa. + * + * Note that this only works for a limited range of kernel addresses, + * and very well may not span all memory. Consider this interface + * deprecated in favour of the DMA-mapping API. + */ +extern unsigned long __direct_map_base; +extern unsigned long __direct_map_size; + +static inline unsigned long __deprecated virt_to_bus(void *address) +{ + unsigned long phys = virt_to_phys(address); + unsigned long bus = phys + __direct_map_base; + return phys <= __direct_map_size ? bus : 0; +} +#define isa_virt_to_bus virt_to_bus + +static inline void * __deprecated bus_to_virt(unsigned long address) +{ + void *virt; + + /* This check is a sanity check but also ensures that bus address 0 + maps to virtual address 0 which is useful to detect null pointers + (the NCR driver is much simpler if NULL pointers are preserved). */ + address -= __direct_map_base; + virt = phys_to_virt(address); + return (long)address <= 0 ? NULL : virt; +} +#define isa_bus_to_virt bus_to_virt + +/* + * There are different chipsets to interface the Alpha CPUs to the world. + */ + +#define IO_CONCAT(a,b) _IO_CONCAT(a,b) +#define _IO_CONCAT(a,b) a ## _ ## b + +#ifdef CONFIG_ALPHA_GENERIC + +/* In a generic kernel, we always go through the machine vector. */ + +#define REMAP1(TYPE, NAME, QUAL) \ +static inline TYPE generic_##NAME(QUAL void __iomem *addr) \ +{ \ + return alpha_mv.mv_##NAME(addr); \ +} + +#define REMAP2(TYPE, NAME, QUAL) \ +static inline void generic_##NAME(TYPE b, QUAL void __iomem *addr) \ +{ \ + alpha_mv.mv_##NAME(b, addr); \ +} + +REMAP1(unsigned int, ioread8, /**/) +REMAP1(unsigned int, ioread16, /**/) +REMAP1(unsigned int, ioread32, /**/) +REMAP1(u8, readb, const volatile) +REMAP1(u16, readw, const volatile) +REMAP1(u32, readl, const volatile) +REMAP1(u64, readq, const volatile) + +REMAP2(u8, iowrite8, /**/) +REMAP2(u16, iowrite16, /**/) +REMAP2(u32, iowrite32, /**/) +REMAP2(u8, writeb, volatile) +REMAP2(u16, writew, volatile) +REMAP2(u32, writel, volatile) +REMAP2(u64, writeq, volatile) + +#undef REMAP1 +#undef REMAP2 + +extern inline void __iomem *generic_ioportmap(unsigned long a) +{ + return alpha_mv.mv_ioportmap(a); +} + +static inline void __iomem *generic_ioremap(unsigned long a, unsigned long s) +{ + return alpha_mv.mv_ioremap(a, s); +} + +static inline void generic_iounmap(volatile void __iomem *a) +{ + return alpha_mv.mv_iounmap(a); +} + +static inline int generic_is_ioaddr(unsigned long a) +{ + return alpha_mv.mv_is_ioaddr(a); +} + +static inline int generic_is_mmio(const volatile void __iomem *a) +{ + return alpha_mv.mv_is_mmio(a); +} + +#define __IO_PREFIX generic +#define generic_trivial_rw_bw 0 +#define generic_trivial_rw_lq 0 +#define generic_trivial_io_bw 0 +#define generic_trivial_io_lq 0 +#define generic_trivial_iounmap 0 + +#else + +#if defined(CONFIG_ALPHA_APECS) +# include <asm/core_apecs.h> +#elif defined(CONFIG_ALPHA_CIA) +# include <asm/core_cia.h> +#elif defined(CONFIG_ALPHA_IRONGATE) +# include <asm/core_irongate.h> +#elif defined(CONFIG_ALPHA_JENSEN) +# include <asm/jensen.h> +#elif defined(CONFIG_ALPHA_LCA) +# include <asm/core_lca.h> +#elif defined(CONFIG_ALPHA_MARVEL) +# include <asm/core_marvel.h> +#elif defined(CONFIG_ALPHA_MCPCIA) +# include <asm/core_mcpcia.h> +#elif defined(CONFIG_ALPHA_POLARIS) +# include <asm/core_polaris.h> +#elif defined(CONFIG_ALPHA_T2) +# include <asm/core_t2.h> +#elif defined(CONFIG_ALPHA_TSUNAMI) +# include <asm/core_tsunami.h> +#elif defined(CONFIG_ALPHA_TITAN) +# include <asm/core_titan.h> +#elif defined(CONFIG_ALPHA_WILDFIRE) +# include <asm/core_wildfire.h> +#else +#error "What system is this?" +#endif + +#endif /* GENERIC */ + +/* + * We always have external versions of these routines. + */ +extern u8 inb(unsigned long port); +extern u16 inw(unsigned long port); +extern u32 inl(unsigned long port); +extern void outb(u8 b, unsigned long port); +extern void outw(u16 b, unsigned long port); +extern void outl(u32 b, unsigned long port); + +extern u8 readb(const volatile void __iomem *addr); +extern u16 readw(const volatile void __iomem *addr); +extern u32 readl(const volatile void __iomem *addr); +extern u64 readq(const volatile void __iomem *addr); +extern void writeb(u8 b, volatile void __iomem *addr); +extern void writew(u16 b, volatile void __iomem *addr); +extern void writel(u32 b, volatile void __iomem *addr); +extern void writeq(u64 b, volatile void __iomem *addr); + +extern u8 __raw_readb(const volatile void __iomem *addr); +extern u16 __raw_readw(const volatile void __iomem *addr); +extern u32 __raw_readl(const volatile void __iomem *addr); +extern u64 __raw_readq(const volatile void __iomem *addr); +extern void __raw_writeb(u8 b, volatile void __iomem *addr); +extern void __raw_writew(u16 b, volatile void __iomem *addr); +extern void __raw_writel(u32 b, volatile void __iomem *addr); +extern void __raw_writeq(u64 b, volatile void __iomem *addr); + +/* + * Mapping from port numbers to __iomem space is pretty easy. + */ + +/* These two have to be extern inline because of the extern prototype from + <asm-generic/iomap.h>. It is not legal to mix "extern" and "static" for + the same declaration. */ +extern inline void __iomem *ioport_map(unsigned long port, unsigned int size) +{ + return IO_CONCAT(__IO_PREFIX,ioportmap) (port); +} + +extern inline void ioport_unmap(void __iomem *addr) +{ +} + +static inline void __iomem *ioremap(unsigned long port, unsigned long size) +{ + return IO_CONCAT(__IO_PREFIX,ioremap) (port, size); +} + +static inline void __iomem *__ioremap(unsigned long port, unsigned long size, + unsigned long flags) +{ + return ioremap(port, size); +} + +static inline void __iomem * ioremap_nocache(unsigned long offset, + unsigned long size) +{ + return ioremap(offset, size); +} + +static inline void iounmap(volatile void __iomem *addr) +{ + IO_CONCAT(__IO_PREFIX,iounmap)(addr); +} + +static inline int __is_ioaddr(unsigned long addr) +{ + return IO_CONCAT(__IO_PREFIX,is_ioaddr)(addr); +} +#define __is_ioaddr(a) __is_ioaddr((unsigned long)(a)) + +static inline int __is_mmio(const volatile void __iomem *addr) +{ + return IO_CONCAT(__IO_PREFIX,is_mmio)(addr); +} + + +/* + * If the actual I/O bits are sufficiently trivial, then expand inline. + */ + +#if IO_CONCAT(__IO_PREFIX,trivial_io_bw) +extern inline unsigned int ioread8(void __iomem *addr) +{ + unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr); + mb(); + return ret; +} + +extern inline unsigned int ioread16(void __iomem *addr) +{ + unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr); + mb(); + return ret; +} + +extern inline void iowrite8(u8 b, void __iomem *addr) +{ + IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr); + mb(); +} + +extern inline void iowrite16(u16 b, void __iomem *addr) +{ + IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr); + mb(); +} + +extern inline u8 inb(unsigned long port) +{ + return ioread8(ioport_map(port, 1)); +} + +extern inline u16 inw(unsigned long port) +{ + return ioread16(ioport_map(port, 2)); +} + +extern inline void outb(u8 b, unsigned long port) +{ + iowrite8(b, ioport_map(port, 1)); +} + +extern inline void outw(u16 b, unsigned long port) +{ + iowrite16(b, ioport_map(port, 2)); +} +#endif + +#if IO_CONCAT(__IO_PREFIX,trivial_io_lq) +extern inline unsigned int ioread32(void __iomem *addr) +{ + unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr); + mb(); + return ret; +} + +extern inline void iowrite32(u32 b, void __iomem *addr) +{ + IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr); + mb(); +} + +extern inline u32 inl(unsigned long port) +{ + return ioread32(ioport_map(port, 4)); +} + +extern inline void outl(u32 b, unsigned long port) +{ + iowrite32(b, ioport_map(port, 4)); +} +#endif + +#if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1 +extern inline u8 __raw_readb(const volatile void __iomem *addr) +{ + return IO_CONCAT(__IO_PREFIX,readb)(addr); +} + +extern inline u16 __raw_readw(const volatile void __iomem *addr) +{ + return IO_CONCAT(__IO_PREFIX,readw)(addr); +} + +extern inline void __raw_writeb(u8 b, volatile void __iomem *addr) +{ + IO_CONCAT(__IO_PREFIX,writeb)(b, addr); +} + +extern inline void __raw_writew(u16 b, volatile void __iomem *addr) +{ + IO_CONCAT(__IO_PREFIX,writew)(b, addr); +} + +extern inline u8 readb(const volatile void __iomem *addr) +{ + u8 ret = __raw_readb(addr); + mb(); + return ret; +} + +extern inline u16 readw(const volatile void __iomem *addr) +{ + u16 ret = __raw_readw(addr); + mb(); + return ret; +} + +extern inline void writeb(u8 b, volatile void __iomem *addr) +{ + __raw_writeb(b, addr); + mb(); +} + +extern inline void writew(u16 b, volatile void __iomem *addr) +{ + __raw_writew(b, addr); + mb(); +} +#endif + +#if IO_CONCAT(__IO_PREFIX,trivial_rw_lq) == 1 +extern inline u32 __raw_readl(const volatile void __iomem *addr) +{ + return IO_CONCAT(__IO_PREFIX,readl)(addr); +} + +extern inline u64 __raw_readq(const volatile void __iomem *addr) +{ + return IO_CONCAT(__IO_PREFIX,readq)(addr); +} + +extern inline void __raw_writel(u32 b, volatile void __iomem *addr) +{ + IO_CONCAT(__IO_PREFIX,writel)(b, addr); +} + +extern inline void __raw_writeq(u64 b, volatile void __iomem *addr) +{ + IO_CONCAT(__IO_PREFIX,writeq)(b, addr); +} + +extern inline u32 readl(const volatile void __iomem *addr) +{ + u32 ret = __raw_readl(addr); + mb(); + return ret; +} + +extern inline u64 readq(const volatile void __iomem *addr) +{ + u64 ret = __raw_readq(addr); + mb(); + return ret; +} + +extern inline void writel(u32 b, volatile void __iomem *addr) +{ + __raw_writel(b, addr); + mb(); +} + +extern inline void writeq(u64 b, volatile void __iomem *addr) +{ + __raw_writeq(b, addr); + mb(); +} +#endif + +#define inb_p inb +#define inw_p inw +#define inl_p inl +#define outb_p outb +#define outw_p outw +#define outl_p outl +#define readb_relaxed(addr) __raw_readb(addr) +#define readw_relaxed(addr) __raw_readw(addr) +#define readl_relaxed(addr) __raw_readl(addr) +#define readq_relaxed(addr) __raw_readq(addr) + +#define mmiowb() + +/* + * String version of IO memory access ops: + */ +extern void memcpy_fromio(void *, const volatile void __iomem *, long); +extern void memcpy_toio(volatile void __iomem *, const void *, long); +extern void _memset_c_io(volatile void __iomem *, unsigned long, long); + +static inline void memset_io(volatile void __iomem *addr, u8 c, long len) +{ + _memset_c_io(addr, 0x0101010101010101UL * c, len); +} + +#define __HAVE_ARCH_MEMSETW_IO +static inline void memsetw_io(volatile void __iomem *addr, u16 c, long len) +{ + _memset_c_io(addr, 0x0001000100010001UL * c, len); +} + +/* + * String versions of in/out ops: + */ +extern void insb (unsigned long port, void *dst, unsigned long count); +extern void insw (unsigned long port, void *dst, unsigned long count); +extern void insl (unsigned long port, void *dst, unsigned long count); +extern void outsb (unsigned long port, const void *src, unsigned long count); +extern void outsw (unsigned long port, const void *src, unsigned long count); +extern void outsl (unsigned long port, const void *src, unsigned long count); + +/* + * The Alpha Jensen hardware for some rather strange reason puts + * the RTC clock at 0x170 instead of 0x70. Probably due to some + * misguided idea about using 0x70 for NMI stuff. + * + * These defines will override the defaults when doing RTC queries + */ + +#ifdef CONFIG_ALPHA_GENERIC +# define RTC_PORT(x) ((x) + alpha_mv.rtc_port) +#else +# ifdef CONFIG_ALPHA_JENSEN +# define RTC_PORT(x) (0x170+(x)) +# else +# define RTC_PORT(x) (0x70 + (x)) +# endif +#endif +#define RTC_ALWAYS_BCD 0 + +/* + * Some mucking forons use if[n]def writeq to check if platform has it. + * It's a bloody bad idea and we probably want ARCH_HAS_WRITEQ for them + * to play with; for now just use cpp anti-recursion logics and make sure + * that damn thing is defined and expands to itself. + */ + +#define writeq writeq +#define readq readq + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_IO_H */ diff --git a/arch/alpha/include/asm/io_trivial.h b/arch/alpha/include/asm/io_trivial.h new file mode 100644 index 000000000000..1c77f10b4b36 --- /dev/null +++ b/arch/alpha/include/asm/io_trivial.h @@ -0,0 +1,131 @@ +/* Trivial implementations of basic i/o routines. Assumes that all + of the hard work has been done by ioremap and ioportmap, and that + access to i/o space is linear. */ + +/* This file may be included multiple times. */ + +#if IO_CONCAT(__IO_PREFIX,trivial_io_bw) +__EXTERN_INLINE unsigned int +IO_CONCAT(__IO_PREFIX,ioread8)(void __iomem *a) +{ + return __kernel_ldbu(*(volatile u8 __force *)a); +} + +__EXTERN_INLINE unsigned int +IO_CONCAT(__IO_PREFIX,ioread16)(void __iomem *a) +{ + return __kernel_ldwu(*(volatile u16 __force *)a); +} + +__EXTERN_INLINE void +IO_CONCAT(__IO_PREFIX,iowrite8)(u8 b, void __iomem *a) +{ + __kernel_stb(b, *(volatile u8 __force *)a); +} + +__EXTERN_INLINE void +IO_CONCAT(__IO_PREFIX,iowrite16)(u16 b, void __iomem *a) +{ + __kernel_stw(b, *(volatile u16 __force *)a); +} +#endif + +#if IO_CONCAT(__IO_PREFIX,trivial_io_lq) +__EXTERN_INLINE unsigned int +IO_CONCAT(__IO_PREFIX,ioread32)(void __iomem *a) +{ + return *(volatile u32 __force *)a; +} + +__EXTERN_INLINE void +IO_CONCAT(__IO_PREFIX,iowrite32)(u32 b, void __iomem *a) +{ + *(volatile u32 __force *)a = b; +} +#endif + +#if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1 +__EXTERN_INLINE u8 +IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a) +{ + return __kernel_ldbu(*(const volatile u8 __force *)a); +} + +__EXTERN_INLINE u16 +IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a) +{ + return __kernel_ldwu(*(const volatile u16 __force *)a); +} + +__EXTERN_INLINE void +IO_CONCAT(__IO_PREFIX,writeb)(u8 b, volatile void __iomem *a) +{ + __kernel_stb(b, *(volatile u8 __force *)a); +} + +__EXTERN_INLINE void +IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a) +{ + __kernel_stw(b, *(volatile u16 __force *)a); +} +#elif IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 2 +__EXTERN_INLINE u8 +IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a) +{ + void __iomem *addr = (void __iomem *)a; + return IO_CONCAT(__IO_PREFIX,ioread8)(addr); +} + +__EXTERN_INLINE u16 +IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a) +{ + void __iomem *addr = (void __iomem *)a; + return IO_CONCAT(__IO_PREFIX,ioread16)(addr); +} + +__EXTERN_INLINE void +IO_CONCAT(__IO_PREFIX,writeb)(u8 b, volatile void __iomem *a) +{ + void __iomem *addr = (void __iomem *)a; + IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr); +} + +__EXTERN_INLINE void +IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a) +{ + void __iomem *addr = (void __iomem *)a; + IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr); +} +#endif + +#if IO_CONCAT(__IO_PREFIX,trivial_rw_lq) == 1 +__EXTERN_INLINE u32 +IO_CONCAT(__IO_PREFIX,readl)(const volatile void __iomem *a) +{ + return *(const volatile u32 __force *)a; +} + +__EXTERN_INLINE u64 +IO_CONCAT(__IO_PREFIX,readq)(const volatile void __iomem *a) +{ + return *(const volatile u64 __force *)a; +} + +__EXTERN_INLINE void +IO_CONCAT(__IO_PREFIX,writel)(u32 b, volatile void __iomem *a) +{ + *(volatile u32 __force *)a = b; +} + +__EXTERN_INLINE void +IO_CONCAT(__IO_PREFIX,writeq)(u64 b, volatile void __iomem *a) +{ + *(volatile u64 __force *)a = b; +} +#endif + +#if IO_CONCAT(__IO_PREFIX,trivial_iounmap) +__EXTERN_INLINE void IO_CONCAT(__IO_PREFIX,iounmap)(volatile void __iomem *a) +{ +} +#endif diff --git a/arch/alpha/include/asm/ioctl.h b/arch/alpha/include/asm/ioctl.h new file mode 100644 index 000000000000..fc63727f4178 --- /dev/null +++ b/arch/alpha/include/asm/ioctl.h @@ -0,0 +1,66 @@ +#ifndef _ALPHA_IOCTL_H +#define _ALPHA_IOCTL_H + +/* + * The original linux ioctl numbering scheme was just a general + * "anything goes" setup, where more or less random numbers were + * assigned. Sorry, I was clueless when I started out on this. + * + * On the alpha, we'll try to clean it up a bit, using a more sane + * ioctl numbering, and also trying to be compatible with OSF/1 in + * the process. I'd like to clean it up for the i386 as well, but + * it's so painful recognizing both the new and the old numbers.. + */ + +#define _IOC_NRBITS 8 +#define _IOC_TYPEBITS 8 +#define _IOC_SIZEBITS 13 +#define _IOC_DIRBITS 3 + +#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) +#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) +#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) +#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) + +#define _IOC_NRSHIFT 0 +#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS) +#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS) +#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS) + +/* + * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit. + * And this turns out useful to catch old ioctl numbers in header + * files for us. + */ +#define _IOC_NONE 1U +#define _IOC_READ 2U +#define _IOC_WRITE 4U + +#define _IOC(dir,type,nr,size) \ + ((unsigned int) \ + (((dir) << _IOC_DIRSHIFT) | \ + ((type) << _IOC_TYPESHIFT) | \ + ((nr) << _IOC_NRSHIFT) | \ + ((size) << _IOC_SIZESHIFT))) + +/* used to create numbers */ +#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0) +#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size)) +#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size)) +#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size)) + +/* used to decode them.. */ +#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) +#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) +#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) +#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK) + +/* ...and for the drivers/sound files... */ + +#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) +#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) +#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) +#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT) +#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) + +#endif /* _ALPHA_IOCTL_H */ diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h new file mode 100644 index 000000000000..67bb9f6fdbe4 --- /dev/null +++ b/arch/alpha/include/asm/ioctls.h @@ -0,0 +1,112 @@ +#ifndef _ASM_ALPHA_IOCTLS_H +#define _ASM_ALPHA_IOCTLS_H + +#include <asm/ioctl.h> + +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +#define TIOCGETP _IOR('t', 8, struct sgttyb) +#define TIOCSETP _IOW('t', 9, struct sgttyb) +#define TIOCSETN _IOW('t', 10, struct sgttyb) /* TIOCSETP wo flush */ + +#define TIOCSETC _IOW('t', 17, struct tchars) +#define TIOCGETC _IOR('t', 18, struct tchars) +#define TCGETS _IOR('t', 19, struct termios) +#define TCSETS _IOW('t', 20, struct termios) +#define TCSETSW _IOW('t', 21, struct termios) +#define TCSETSF _IOW('t', 22, struct termios) + +#define TCGETA _IOR('t', 23, struct termio) +#define TCSETA _IOW('t', 24, struct termio) +#define TCSETAW _IOW('t', 25, struct termio) +#define TCSETAF _IOW('t', 28, struct termio) + +#define TCSBRK _IO('t', 29) +#define TCXONC _IO('t', 30) +#define TCFLSH _IO('t', 31) + +#define TIOCSWINSZ _IOW('t', 103, struct winsize) +#define TIOCGWINSZ _IOR('t', 104, struct winsize) +#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ +#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ +#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ + +#define TIOCGLTC _IOR('t', 116, struct ltchars) +#define TIOCSLTC _IOW('t', 117, struct ltchars) +#define TIOCSPGRP _IOW('t', 118, int) +#define TIOCGPGRP _IOR('t', 119, int) + +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E + +#define TIOCSTI 0x5412 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +# define TIOCM_LE 0x001 +# define TIOCM_DTR 0x002 +# define TIOCM_RTS 0x004 +# define TIOCM_ST 0x008 +# define TIOCM_SR 0x010 +# define TIOCM_CTS 0x020 +# define TIOCM_CAR 0x040 +# define TIOCM_RNG 0x080 +# define TIOCM_DSR 0x100 +# define TIOCM_CD TIOCM_CAR +# define TIOCM_RI TIOCM_RNG +# define TIOCM_OUT1 0x2000 +# define TIOCM_OUT2 0x4000 +# define TIOCM_LOOP 0x8000 + +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +# define TIOCPKT_DATA 0 +# define TIOCPKT_FLUSHREAD 1 +# define TIOCPKT_FLUSHWRITE 2 +# define TIOCPKT_STOP 4 +# define TIOCPKT_START 8 +# define TIOCPKT_NOSTOP 16 +# define TIOCPKT_DOSTOP 32 + + +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ + /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ +#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ + +#endif /* _ASM_ALPHA_IOCTLS_H */ diff --git a/arch/alpha/include/asm/ipcbuf.h b/arch/alpha/include/asm/ipcbuf.h new file mode 100644 index 000000000000..d9c0e1a50702 --- /dev/null +++ b/arch/alpha/include/asm/ipcbuf.h @@ -0,0 +1,28 @@ +#ifndef _ALPHA_IPCBUF_H +#define _ALPHA_IPCBUF_H + +/* + * The ipc64_perm structure for alpha architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit seq + * - 2 miscellaneous 64-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid_t uid; + __kernel_gid_t gid; + __kernel_uid_t cuid; + __kernel_gid_t cgid; + __kernel_mode_t mode; + unsigned short seq; + unsigned short __pad1; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ALPHA_IPCBUF_H */ diff --git a/arch/alpha/include/asm/irq.h b/arch/alpha/include/asm/irq.h new file mode 100644 index 000000000000..06377400dc09 --- /dev/null +++ b/arch/alpha/include/asm/irq.h @@ -0,0 +1,91 @@ +#ifndef _ALPHA_IRQ_H +#define _ALPHA_IRQ_H + +/* + * linux/include/alpha/irq.h + * + * (C) 1994 Linus Torvalds + */ + +#include <linux/linkage.h> + +#if defined(CONFIG_ALPHA_GENERIC) + +/* Here NR_IRQS is not exact, but rather an upper bound. This is used + many places throughout the kernel to size static arrays. That's ok, + we'll use alpha_mv.nr_irqs when we want the real thing. */ + +/* When LEGACY_START_ADDRESS is selected, we leave out: + TITAN + WILDFIRE + MARVEL + + This helps keep the kernel object size reasonable for the majority + of machines. +*/ + +# if defined(CONFIG_ALPHA_LEGACY_START_ADDRESS) +# define NR_IRQS (128) /* max is RAWHIDE/TAKARA */ +# else +# define NR_IRQS (32768 + 16) /* marvel - 32 pids */ +# endif + +#elif defined(CONFIG_ALPHA_CABRIOLET) || \ + defined(CONFIG_ALPHA_EB66P) || \ + defined(CONFIG_ALPHA_EB164) || \ + defined(CONFIG_ALPHA_PC164) || \ + defined(CONFIG_ALPHA_LX164) +# define NR_IRQS 35 + +#elif defined(CONFIG_ALPHA_EB66) || \ + defined(CONFIG_ALPHA_EB64P) || \ + defined(CONFIG_ALPHA_MIKASA) +# define NR_IRQS 32 + +#elif defined(CONFIG_ALPHA_ALCOR) || \ + defined(CONFIG_ALPHA_MIATA) || \ + defined(CONFIG_ALPHA_RUFFIAN) || \ + defined(CONFIG_ALPHA_RX164) || \ + defined(CONFIG_ALPHA_NORITAKE) +# define NR_IRQS 48 + +#elif defined(CONFIG_ALPHA_SABLE) || \ + defined(CONFIG_ALPHA_SX164) +# define NR_IRQS 40 + +#elif defined(CONFIG_ALPHA_DP264) || \ + defined(CONFIG_ALPHA_LYNX) || \ + defined(CONFIG_ALPHA_SHARK) || \ + defined(CONFIG_ALPHA_EIGER) +# define NR_IRQS 64 + +#elif defined(CONFIG_ALPHA_TITAN) +#define NR_IRQS 80 + +#elif defined(CONFIG_ALPHA_RAWHIDE) || \ + defined(CONFIG_ALPHA_TAKARA) +# define NR_IRQS 128 + +#elif defined(CONFIG_ALPHA_WILDFIRE) +# define NR_IRQS 2048 /* enuff for 8 QBBs */ + +#elif defined(CONFIG_ALPHA_MARVEL) +# define NR_IRQS (32768 + 16) /* marvel - 32 pids*/ + +#else /* everyone else */ +# define NR_IRQS 16 +#endif + +static __inline__ int irq_canonicalize(int irq) +{ + /* + * XXX is this true for all Alpha's? The old serial driver + * did it this way for years without any complaints, so.... + */ + return ((irq == 2) ? 9 : irq); +} + +struct pt_regs; +extern void (*perf_irq)(unsigned long, struct pt_regs *); + +#endif /* _ALPHA_IRQ_H */ diff --git a/arch/alpha/include/asm/irq_regs.h b/arch/alpha/include/asm/irq_regs.h new file mode 100644 index 000000000000..3dd9c0b70270 --- /dev/null +++ b/arch/alpha/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include <asm-generic/irq_regs.h> diff --git a/arch/alpha/include/asm/jensen.h b/arch/alpha/include/asm/jensen.h new file mode 100644 index 000000000000..964b06ead43b --- /dev/null +++ b/arch/alpha/include/asm/jensen.h @@ -0,0 +1,346 @@ +#ifndef __ALPHA_JENSEN_H +#define __ALPHA_JENSEN_H + +#include <asm/compiler.h> + +/* + * Defines for the AlphaPC EISA IO and memory address space. + */ + +/* + * NOTE! The memory operations do not set any memory barriers, as it's + * not needed for cases like a frame buffer that is essentially memory-like. + * You need to do them by hand if the operations depend on ordering. + * + * Similarly, the port IO operations do a "mb" only after a write operation: + * if an mb is needed before (as in the case of doing memory mapped IO + * first, and then a port IO operation to the same device), it needs to be + * done by hand. + * + * After the above has bitten me 100 times, I'll give up and just do the + * mb all the time, but right now I'm hoping this will work out. Avoiding + * mb's may potentially be a noticeable speed improvement, but I can't + * honestly say I've tested it. + * + * Handling interrupts that need to do mb's to synchronize to non-interrupts + * is another fun race area. Don't do it (because if you do, I'll have to + * do *everything* with interrupts disabled, ugh). + */ + +/* + * EISA Interrupt Acknowledge address + */ +#define EISA_INTA (IDENT_ADDR + 0x100000000UL) + +/* + * FEPROM addresses + */ +#define EISA_FEPROM0 (IDENT_ADDR + 0x180000000UL) +#define EISA_FEPROM1 (IDENT_ADDR + 0x1A0000000UL) + +/* + * VL82C106 base address + */ +#define EISA_VL82C106 (IDENT_ADDR + 0x1C0000000UL) + +/* + * EISA "Host Address Extension" address (bits 25-31 of the EISA address) + */ +#define EISA_HAE (IDENT_ADDR + 0x1D0000000UL) + +/* + * "SYSCTL" register address + */ +#define EISA_SYSCTL (IDENT_ADDR + 0x1E0000000UL) + +/* + * "spare" register address + */ +#define EISA_SPARE (IDENT_ADDR + 0x1F0000000UL) + +/* + * EISA memory address offset + */ +#define EISA_MEM (IDENT_ADDR + 0x200000000UL) + +/* + * EISA IO address offset + */ +#define EISA_IO (IDENT_ADDR + 0x300000000UL) + + +#ifdef __KERNEL__ + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __IO_EXTERN_INLINE +#endif + +/* + * Handle the "host address register". This needs to be set + * to the high 7 bits of the EISA address. This is also needed + * for EISA IO addresses, which are only 16 bits wide (the + * hae needs to be set to 0). + * + * HAE isn't needed for the local IO operations, though. + */ + +#define JENSEN_HAE_ADDRESS EISA_HAE +#define JENSEN_HAE_MASK 0x1ffffff + +__EXTERN_INLINE void jensen_set_hae(unsigned long addr) +{ + /* hae on the Jensen is bits 31:25 shifted right */ + addr >>= 25; + if (addr != alpha_mv.hae_cache) + set_hae(addr); +} + +#define vuip volatile unsigned int * + +/* + * IO functions + * + * The "local" functions are those that don't go out to the EISA bus, + * but instead act on the VL82C106 chip directly.. This is mainly the + * keyboard, RTC, printer and first two serial lines.. + * + * The local stuff makes for some complications, but it seems to be + * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H + * convinced that I need one of the newer machines. + */ + +static inline unsigned int jensen_local_inb(unsigned long addr) +{ + return 0xff & *(vuip)((addr << 9) + EISA_VL82C106); +} + +static inline void jensen_local_outb(u8 b, unsigned long addr) +{ + *(vuip)((addr << 9) + EISA_VL82C106) = b; + mb(); +} + +static inline unsigned int jensen_bus_inb(unsigned long addr) +{ + long result; + + jensen_set_hae(0); + result = *(volatile int *)((addr << 7) + EISA_IO + 0x00); + return __kernel_extbl(result, addr & 3); +} + +static inline void jensen_bus_outb(u8 b, unsigned long addr) +{ + jensen_set_hae(0); + *(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101; + mb(); +} + +/* + * It seems gcc is not very good at optimizing away logical + * operations that result in operations across inline functions. + * Which is why this is a macro. + */ + +#define jensen_is_local(addr) ( \ +/* keyboard */ (addr == 0x60 || addr == 0x64) || \ +/* RTC */ (addr == 0x170 || addr == 0x171) || \ +/* mb COM2 */ (addr >= 0x2f8 && addr <= 0x2ff) || \ +/* mb LPT1 */ (addr >= 0x3bc && addr <= 0x3be) || \ +/* mb COM2 */ (addr >= 0x3f8 && addr <= 0x3ff)) + +__EXTERN_INLINE u8 jensen_inb(unsigned long addr) +{ + if (jensen_is_local(addr)) + return jensen_local_inb(addr); + else + return jensen_bus_inb(addr); +} + +__EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr) +{ + if (jensen_is_local(addr)) + jensen_local_outb(b, addr); + else + jensen_bus_outb(b, addr); +} + +__EXTERN_INLINE u16 jensen_inw(unsigned long addr) +{ + long result; + + jensen_set_hae(0); + result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20); + result >>= (addr & 3) * 8; + return 0xffffUL & result; +} + +__EXTERN_INLINE u32 jensen_inl(unsigned long addr) +{ + jensen_set_hae(0); + return *(vuip) ((addr << 7) + EISA_IO + 0x60); +} + +__EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr) +{ + jensen_set_hae(0); + *(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001; + mb(); +} + +__EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr) +{ + jensen_set_hae(0); + *(vuip) ((addr << 7) + EISA_IO + 0x60) = b; + mb(); +} + +/* + * Memory functions. + */ + +__EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + long result; + + jensen_set_hae(addr); + addr &= JENSEN_HAE_MASK; + result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00); + result >>= (addr & 3) * 8; + return 0xffUL & result; +} + +__EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + long result; + + jensen_set_hae(addr); + addr &= JENSEN_HAE_MASK; + result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20); + result >>= (addr & 3) * 8; + return 0xffffUL & result; +} + +__EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + jensen_set_hae(addr); + addr &= JENSEN_HAE_MASK; + return *(vuip) ((addr << 7) + EISA_MEM + 0x60); +} + +__EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + unsigned long r0, r1; + + jensen_set_hae(addr); + addr &= JENSEN_HAE_MASK; + addr = (addr << 7) + EISA_MEM + 0x60; + r0 = *(vuip) (addr); + r1 = *(vuip) (addr + (4 << 7)); + return r1 << 32 | r0; +} + +__EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + jensen_set_hae(addr); + addr &= JENSEN_HAE_MASK; + *(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101; +} + +__EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + jensen_set_hae(addr); + addr &= JENSEN_HAE_MASK; + *(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001; +} + +__EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + jensen_set_hae(addr); + addr &= JENSEN_HAE_MASK; + *(vuip) ((addr << 7) + EISA_MEM + 0x60) = b; +} + +__EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + jensen_set_hae(addr); + addr &= JENSEN_HAE_MASK; + addr = (addr << 7) + EISA_MEM + 0x60; + *(vuip) (addr) = b; + *(vuip) (addr + (4 << 7)) = b >> 32; +} + +__EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr) +{ + return (void __iomem *)addr; +} + +__EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr, + unsigned long size) +{ + return (void __iomem *)(addr + 0x100000000ul); +} + +__EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr) +{ + return (long)addr >= 0; +} + +__EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= 0x100000000ul; +} + +/* New-style ioread interface. All the routines are so ugly for Jensen + that it doesn't make sense to merge them. */ + +#define IOPORT(OS, NS) \ +__EXTERN_INLINE unsigned int jensen_ioread##NS(void __iomem *xaddr) \ +{ \ + if (jensen_is_mmio(xaddr)) \ + return jensen_read##OS(xaddr - 0x100000000ul); \ + else \ + return jensen_in##OS((unsigned long)xaddr); \ +} \ +__EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr) \ +{ \ + if (jensen_is_mmio(xaddr)) \ + jensen_write##OS(b, xaddr - 0x100000000ul); \ + else \ + jensen_out##OS(b, (unsigned long)xaddr); \ +} + +IOPORT(b, 8) +IOPORT(w, 16) +IOPORT(l, 32) + +#undef IOPORT + +#undef vuip + +#undef __IO_PREFIX +#define __IO_PREFIX jensen +#define jensen_trivial_rw_bw 0 +#define jensen_trivial_rw_lq 0 +#define jensen_trivial_io_bw 0 +#define jensen_trivial_io_lq 0 +#define jensen_trivial_iounmap 1 +#include <asm/io_trivial.h> + +#ifdef __IO_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __IO_EXTERN_INLINE +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_JENSEN_H */ diff --git a/arch/alpha/include/asm/kdebug.h b/arch/alpha/include/asm/kdebug.h new file mode 100644 index 000000000000..6ece1b037665 --- /dev/null +++ b/arch/alpha/include/asm/kdebug.h @@ -0,0 +1 @@ +#include <asm-generic/kdebug.h> diff --git a/arch/alpha/include/asm/kmap_types.h b/arch/alpha/include/asm/kmap_types.h new file mode 100644 index 000000000000..3e6735a34c57 --- /dev/null +++ b/arch/alpha/include/asm/kmap_types.h @@ -0,0 +1,32 @@ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +/* Dummy header just to define km_type. */ + + +#ifdef CONFIG_DEBUG_HIGHMEM +# define D(n) __KM_FENCE_##n , +#else +# define D(n) +#endif + +enum km_type { +D(0) KM_BOUNCE_READ, +D(1) KM_SKB_SUNRPC_DATA, +D(2) KM_SKB_DATA_SOFTIRQ, +D(3) KM_USER0, +D(4) KM_USER1, +D(5) KM_BIO_SRC_IRQ, +D(6) KM_BIO_DST_IRQ, +D(7) KM_PTE0, +D(8) KM_PTE1, +D(9) KM_IRQ0, +D(10) KM_IRQ1, +D(11) KM_SOFTIRQ0, +D(12) KM_SOFTIRQ1, +D(13) KM_TYPE_NR +}; + +#undef D + +#endif diff --git a/arch/alpha/include/asm/linkage.h b/arch/alpha/include/asm/linkage.h new file mode 100644 index 000000000000..291c2d01c44f --- /dev/null +++ b/arch/alpha/include/asm/linkage.h @@ -0,0 +1,6 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +/* Nothing to see here... */ + +#endif diff --git a/arch/alpha/include/asm/local.h b/arch/alpha/include/asm/local.h new file mode 100644 index 000000000000..6ad3ea696421 --- /dev/null +++ b/arch/alpha/include/asm/local.h @@ -0,0 +1,118 @@ +#ifndef _ALPHA_LOCAL_H +#define _ALPHA_LOCAL_H + +#include <linux/percpu.h> +#include <asm/atomic.h> + +typedef struct +{ + atomic_long_t a; +} local_t; + +#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) } +#define local_read(l) atomic_long_read(&(l)->a) +#define local_set(l,i) atomic_long_set(&(l)->a, (i)) +#define local_inc(l) atomic_long_inc(&(l)->a) +#define local_dec(l) atomic_long_dec(&(l)->a) +#define local_add(i,l) atomic_long_add((i),(&(l)->a)) +#define local_sub(i,l) atomic_long_sub((i),(&(l)->a)) + +static __inline__ long local_add_return(long i, local_t * l) +{ + long temp, result; + __asm__ __volatile__( + "1: ldq_l %0,%1\n" + " addq %0,%3,%2\n" + " addq %0,%3,%0\n" + " stq_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (l->a.counter), "=&r" (result) + :"Ir" (i), "m" (l->a.counter) : "memory"); + return result; +} + +static __inline__ long local_sub_return(long i, local_t * l) +{ + long temp, result; + __asm__ __volatile__( + "1: ldq_l %0,%1\n" + " subq %0,%3,%2\n" + " subq %0,%3,%0\n" + " stq_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (l->a.counter), "=&r" (result) + :"Ir" (i), "m" (l->a.counter) : "memory"); + return result; +} + +#define local_cmpxchg(l, o, n) \ + (cmpxchg_local(&((l)->a.counter), (o), (n))) +#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n))) + +/** + * local_add_unless - add unless the number is a given value + * @l: pointer of type local_t + * @a: the amount to add to l... + * @u: ...unless l is equal to u. + * + * Atomically adds @a to @l, so long as it was not @u. + * Returns non-zero if @l was not @u, and zero otherwise. + */ +#define local_add_unless(l, a, u) \ +({ \ + long c, old; \ + c = local_read(l); \ + for (;;) { \ + if (unlikely(c == (u))) \ + break; \ + old = local_cmpxchg((l), c, c + (a)); \ + if (likely(old == c)) \ + break; \ + c = old; \ + } \ + c != (u); \ +}) +#define local_inc_not_zero(l) local_add_unless((l), 1, 0) + +#define local_add_negative(a, l) (local_add_return((a), (l)) < 0) + +#define local_dec_return(l) local_sub_return(1,(l)) + +#define local_inc_return(l) local_add_return(1,(l)) + +#define local_sub_and_test(i,l) (local_sub_return((i), (l)) == 0) + +#define local_inc_and_test(l) (local_add_return(1, (l)) == 0) + +#define local_dec_and_test(l) (local_sub_return(1, (l)) == 0) + +/* Verify if faster than atomic ops */ +#define __local_inc(l) ((l)->a.counter++) +#define __local_dec(l) ((l)->a.counter++) +#define __local_add(i,l) ((l)->a.counter+=(i)) +#define __local_sub(i,l) ((l)->a.counter-=(i)) + +/* Use these for per-cpu local_t variables: on some archs they are + * much more efficient than these naive implementations. Note they take + * a variable, not an address. + */ +#define cpu_local_read(l) local_read(&__get_cpu_var(l)) +#define cpu_local_set(l, i) local_set(&__get_cpu_var(l), (i)) + +#define cpu_local_inc(l) local_inc(&__get_cpu_var(l)) +#define cpu_local_dec(l) local_dec(&__get_cpu_var(l)) +#define cpu_local_add(i, l) local_add((i), &__get_cpu_var(l)) +#define cpu_local_sub(i, l) local_sub((i), &__get_cpu_var(l)) + +#define __cpu_local_inc(l) __local_inc(&__get_cpu_var(l)) +#define __cpu_local_dec(l) __local_dec(&__get_cpu_var(l)) +#define __cpu_local_add(i, l) __local_add((i), &__get_cpu_var(l)) +#define __cpu_local_sub(i, l) __local_sub((i), &__get_cpu_var(l)) + +#endif /* _ALPHA_LOCAL_H */ diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h new file mode 100644 index 000000000000..a86c083cdf7f --- /dev/null +++ b/arch/alpha/include/asm/machvec.h @@ -0,0 +1,134 @@ +#ifndef __ALPHA_MACHVEC_H +#define __ALPHA_MACHVEC_H 1 + +#include <linux/types.h> + +/* + * This file gets pulled in by asm/io.h from user space. We don't + * want most of this escaping. + */ + +#ifdef __KERNEL__ + +/* The following structure vectors all of the I/O and IRQ manipulation + from the generic kernel to the hardware specific backend. */ + +struct task_struct; +struct mm_struct; +struct vm_area_struct; +struct linux_hose_info; +struct pci_dev; +struct pci_ops; +struct pci_controller; +struct _alpha_agp_info; + +struct alpha_machine_vector +{ + /* This "belongs" down below with the rest of the runtime + variables, but it is convenient for entry.S if these + two slots are at the beginning of the struct. */ + unsigned long hae_cache; + unsigned long *hae_register; + + int nr_irqs; + int rtc_port; + unsigned int max_asn; + unsigned long max_isa_dma_address; + unsigned long irq_probe_mask; + unsigned long iack_sc; + unsigned long min_io_address; + unsigned long min_mem_address; + unsigned long pci_dac_offset; + + void (*mv_pci_tbi)(struct pci_controller *hose, + dma_addr_t start, dma_addr_t end); + + unsigned int (*mv_ioread8)(void __iomem *); + unsigned int (*mv_ioread16)(void __iomem *); + unsigned int (*mv_ioread32)(void __iomem *); + + void (*mv_iowrite8)(u8, void __iomem *); + void (*mv_iowrite16)(u16, void __iomem *); + void (*mv_iowrite32)(u32, void __iomem *); + + u8 (*mv_readb)(const volatile void __iomem *); + u16 (*mv_readw)(const volatile void __iomem *); + u32 (*mv_readl)(const volatile void __iomem *); + u64 (*mv_readq)(const volatile void __iomem *); + + void (*mv_writeb)(u8, volatile void __iomem *); + void (*mv_writew)(u16, volatile void __iomem *); + void (*mv_writel)(u32, volatile void __iomem *); + void (*mv_writeq)(u64, volatile void __iomem *); + + void __iomem *(*mv_ioportmap)(unsigned long); + void __iomem *(*mv_ioremap)(unsigned long, unsigned long); + void (*mv_iounmap)(volatile void __iomem *); + int (*mv_is_ioaddr)(unsigned long); + int (*mv_is_mmio)(const volatile void __iomem *); + + void (*mv_switch_mm)(struct mm_struct *, struct mm_struct *, + struct task_struct *); + void (*mv_activate_mm)(struct mm_struct *, struct mm_struct *); + + void (*mv_flush_tlb_current)(struct mm_struct *); + void (*mv_flush_tlb_current_page)(struct mm_struct * mm, + struct vm_area_struct *vma, + unsigned long addr); + + void (*update_irq_hw)(unsigned long, unsigned long, int); + void (*ack_irq)(unsigned long); + void (*device_interrupt)(unsigned long vector); + void (*machine_check)(u64 vector, u64 la); + + void (*smp_callin)(void); + void (*init_arch)(void); + void (*init_irq)(void); + void (*init_rtc)(void); + void (*init_pci)(void); + void (*kill_arch)(int); + + u8 (*pci_swizzle)(struct pci_dev *, u8 *); + int (*pci_map_irq)(struct pci_dev *, u8, u8); + struct pci_ops *pci_ops; + + struct _alpha_agp_info *(*agp_info)(void); + + const char *vector_name; + + /* NUMA information */ + int (*pa_to_nid)(unsigned long); + int (*cpuid_to_nid)(int); + unsigned long (*node_mem_start)(int); + unsigned long (*node_mem_size)(int); + + /* System specific parameters. */ + union { + struct { + unsigned long gru_int_req_bits; + } cia; + + struct { + unsigned long gamma_bias; + } t2; + + struct { + unsigned int route_tab; + } sio; + } sys; +}; + +extern struct alpha_machine_vector alpha_mv; + +#ifdef CONFIG_ALPHA_GENERIC +extern int alpha_using_srm; +#else +#ifdef CONFIG_ALPHA_SRM +#define alpha_using_srm 1 +#else +#define alpha_using_srm 0 +#endif +#endif /* GENERIC */ + +#endif +#endif /* __ALPHA_MACHVEC_H */ diff --git a/arch/alpha/include/asm/mc146818rtc.h b/arch/alpha/include/asm/mc146818rtc.h new file mode 100644 index 000000000000..097703f1c8cb --- /dev/null +++ b/arch/alpha/include/asm/mc146818rtc.h @@ -0,0 +1,27 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef __ASM_ALPHA_MC146818RTC_H +#define __ASM_ALPHA_MC146818RTC_H + +#include <asm/io.h> + +#ifndef RTC_PORT +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#endif /* __ASM_ALPHA_MC146818RTC_H */ diff --git a/arch/alpha/include/asm/md.h b/arch/alpha/include/asm/md.h new file mode 100644 index 000000000000..6c9b8222a4f2 --- /dev/null +++ b/arch/alpha/include/asm/md.h @@ -0,0 +1,13 @@ +/* $Id: md.h,v 1.1 1997/12/15 15:11:48 jj Exp $ + * md.h: High speed xor_block operation for RAID4/5 + * + */ + +#ifndef __ASM_MD_H +#define __ASM_MD_H + +/* #define HAVE_ARCH_XORBLOCK */ + +#define MD_XORBLOCK_ALIGNMENT sizeof(long) + +#endif /* __ASM_MD_H */ diff --git a/arch/alpha/include/asm/mman.h b/arch/alpha/include/asm/mman.h new file mode 100644 index 000000000000..90d7c35d2867 --- /dev/null +++ b/arch/alpha/include/asm/mman.h @@ -0,0 +1,54 @@ +#ifndef __ALPHA_MMAN_H__ +#define __ALPHA_MMAN_H__ + +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ +#define PROT_SEM 0x8 /* page may be used for atomic ops */ +#define PROT_NONE 0x0 /* page can not be accessed */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ + +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_TYPE 0x0f /* Mask for type of mapping (OSF/1 is _wrong_) */ +#define MAP_FIXED 0x100 /* Interpret addr exactly */ +#define MAP_ANONYMOUS 0x10 /* don't use a file */ + +/* not used by linux, but here to make sure we don't clash with OSF/1 defines */ +#define _MAP_HASSEMAPHORE 0x0200 +#define _MAP_INHERIT 0x0400 +#define _MAP_UNALIGNED 0x0800 + +/* These are linux-specific */ +#define MAP_GROWSDOWN 0x01000 /* stack-like segment */ +#define MAP_DENYWRITE 0x02000 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x04000 /* mark it as an executable */ +#define MAP_LOCKED 0x08000 /* lock the mapping */ +#define MAP_NORESERVE 0x10000 /* don't check for reservations */ +#define MAP_POPULATE 0x20000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x40000 /* do not block on IO */ + +#define MS_ASYNC 1 /* sync memory asynchronously */ +#define MS_SYNC 2 /* synchronous memory sync */ +#define MS_INVALIDATE 4 /* invalidate the caches */ + +#define MCL_CURRENT 8192 /* lock all currently mapped pages */ +#define MCL_FUTURE 16384 /* lock all additions to address space */ + +#define MADV_NORMAL 0 /* no further special treatment */ +#define MADV_RANDOM 1 /* expect random page references */ +#define MADV_SEQUENTIAL 2 /* expect sequential page references */ +#define MADV_WILLNEED 3 /* will need these pages */ +#define MADV_SPACEAVAIL 5 /* ensure resources are available */ +#define MADV_DONTNEED 6 /* don't need these pages */ + +/* common/generic parameters */ +#define MADV_REMOVE 9 /* remove these pages & resources */ +#define MADV_DONTFORK 10 /* don't inherit across fork */ +#define MADV_DOFORK 11 /* do inherit across fork */ + +/* compatibility flags */ +#define MAP_FILE 0 + +#endif /* __ALPHA_MMAN_H__ */ diff --git a/arch/alpha/include/asm/mmu.h b/arch/alpha/include/asm/mmu.h new file mode 100644 index 000000000000..3dc127779329 --- /dev/null +++ b/arch/alpha/include/asm/mmu.h @@ -0,0 +1,7 @@ +#ifndef __ALPHA_MMU_H +#define __ALPHA_MMU_H + +/* The alpha MMU context is one "unsigned long" bitmap per CPU */ +typedef unsigned long mm_context_t[NR_CPUS]; + +#endif diff --git a/arch/alpha/include/asm/mmu_context.h b/arch/alpha/include/asm/mmu_context.h new file mode 100644 index 000000000000..86c08a02d239 --- /dev/null +++ b/arch/alpha/include/asm/mmu_context.h @@ -0,0 +1,260 @@ +#ifndef __ALPHA_MMU_CONTEXT_H +#define __ALPHA_MMU_CONTEXT_H + +/* + * get a new mmu context.. + * + * Copyright (C) 1996, Linus Torvalds + */ + +#include <asm/system.h> +#include <asm/machvec.h> +#include <asm/compiler.h> +#include <asm-generic/mm_hooks.h> + +/* + * Force a context reload. This is needed when we change the page + * table pointer or when we update the ASN of the current process. + */ + +/* Don't get into trouble with dueling __EXTERN_INLINEs. */ +#ifndef __EXTERN_INLINE +#include <asm/io.h> +#endif + + +static inline unsigned long +__reload_thread(struct pcb_struct *pcb) +{ + register unsigned long a0 __asm__("$16"); + register unsigned long v0 __asm__("$0"); + + a0 = virt_to_phys(pcb); + __asm__ __volatile__( + "call_pal %2 #__reload_thread" + : "=r"(v0), "=r"(a0) + : "i"(PAL_swpctx), "r"(a0) + : "$1", "$22", "$23", "$24", "$25"); + + return v0; +} + + +/* + * The maximum ASN's the processor supports. On the EV4 this is 63 + * but the PAL-code doesn't actually use this information. On the + * EV5 this is 127, and EV6 has 255. + * + * On the EV4, the ASNs are more-or-less useless anyway, as they are + * only used as an icache tag, not for TB entries. On the EV5 and EV6, + * ASN's also validate the TB entries, and thus make a lot more sense. + * + * The EV4 ASN's don't even match the architecture manual, ugh. And + * I quote: "If a processor implements address space numbers (ASNs), + * and the old PTE has the Address Space Match (ASM) bit clear (ASNs + * in use) and the Valid bit set, then entries can also effectively be + * made coherent by assigning a new, unused ASN to the currently + * running process and not reusing the previous ASN before calling the + * appropriate PALcode routine to invalidate the translation buffer (TB)". + * + * In short, the EV4 has a "kind of" ASN capability, but it doesn't actually + * work correctly and can thus not be used (explaining the lack of PAL-code + * support). + */ +#define EV4_MAX_ASN 63 +#define EV5_MAX_ASN 127 +#define EV6_MAX_ASN 255 + +#ifdef CONFIG_ALPHA_GENERIC +# define MAX_ASN (alpha_mv.max_asn) +#else +# ifdef CONFIG_ALPHA_EV4 +# define MAX_ASN EV4_MAX_ASN +# elif defined(CONFIG_ALPHA_EV5) +# define MAX_ASN EV5_MAX_ASN +# else +# define MAX_ASN EV6_MAX_ASN +# endif +#endif + +/* + * cpu_last_asn(processor): + * 63 0 + * +-------------+----------------+--------------+ + * | asn version | this processor | hardware asn | + * +-------------+----------------+--------------+ + */ + +#include <asm/smp.h> +#ifdef CONFIG_SMP +#define cpu_last_asn(cpuid) (cpu_data[cpuid].last_asn) +#else +extern unsigned long last_asn; +#define cpu_last_asn(cpuid) last_asn +#endif /* CONFIG_SMP */ + +#define WIDTH_HARDWARE_ASN 8 +#define ASN_FIRST_VERSION (1UL << WIDTH_HARDWARE_ASN) +#define HARDWARE_ASN_MASK ((1UL << WIDTH_HARDWARE_ASN) - 1) + +/* + * NOTE! The way this is set up, the high bits of the "asn_cache" (and + * the "mm->context") are the ASN _version_ code. A version of 0 is + * always considered invalid, so to invalidate another process you only + * need to do "p->mm->context = 0". + * + * If we need more ASN's than the processor has, we invalidate the old + * user TLB's (tbiap()) and start a new ASN version. That will automatically + * force a new asn for any other processes the next time they want to + * run. + */ + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __MMU_EXTERN_INLINE +#endif + +extern inline unsigned long +__get_new_mm_context(struct mm_struct *mm, long cpu) +{ + unsigned long asn = cpu_last_asn(cpu); + unsigned long next = asn + 1; + + if ((asn & HARDWARE_ASN_MASK) >= MAX_ASN) { + tbiap(); + imb(); + next = (asn & ~HARDWARE_ASN_MASK) + ASN_FIRST_VERSION; + } + cpu_last_asn(cpu) = next; + return next; +} + +__EXTERN_INLINE void +ev5_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, + struct task_struct *next) +{ + /* Check if our ASN is of an older version, and thus invalid. */ + unsigned long asn; + unsigned long mmc; + long cpu = smp_processor_id(); + +#ifdef CONFIG_SMP + cpu_data[cpu].asn_lock = 1; + barrier(); +#endif + asn = cpu_last_asn(cpu); + mmc = next_mm->context[cpu]; + if ((mmc ^ asn) & ~HARDWARE_ASN_MASK) { + mmc = __get_new_mm_context(next_mm, cpu); + next_mm->context[cpu] = mmc; + } +#ifdef CONFIG_SMP + else + cpu_data[cpu].need_new_asn = 1; +#endif + + /* Always update the PCB ASN. Another thread may have allocated + a new mm->context (via flush_tlb_mm) without the ASN serial + number wrapping. We have no way to detect when this is needed. */ + task_thread_info(next)->pcb.asn = mmc & HARDWARE_ASN_MASK; +} + +__EXTERN_INLINE void +ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, + struct task_struct *next) +{ + /* As described, ASN's are broken for TLB usage. But we can + optimize for switching between threads -- if the mm is + unchanged from current we needn't flush. */ + /* ??? May not be needed because EV4 PALcode recognizes that + ASN's are broken and does a tbiap itself on swpctx, under + the "Must set ASN or flush" rule. At least this is true + for a 1992 SRM, reports Joseph Martin (jmartin@hlo.dec.com). + I'm going to leave this here anyway, just to Be Sure. -- r~ */ + if (prev_mm != next_mm) + tbiap(); + + /* Do continue to allocate ASNs, because we can still use them + to avoid flushing the icache. */ + ev5_switch_mm(prev_mm, next_mm, next); +} + +extern void __load_new_mm_context(struct mm_struct *); + +#ifdef CONFIG_SMP +#define check_mmu_context() \ +do { \ + int cpu = smp_processor_id(); \ + cpu_data[cpu].asn_lock = 0; \ + barrier(); \ + if (cpu_data[cpu].need_new_asn) { \ + struct mm_struct * mm = current->active_mm; \ + cpu_data[cpu].need_new_asn = 0; \ + if (!mm->context[cpu]) \ + __load_new_mm_context(mm); \ + } \ +} while(0) +#else +#define check_mmu_context() do { } while(0) +#endif + +__EXTERN_INLINE void +ev5_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm) +{ + __load_new_mm_context(next_mm); +} + +__EXTERN_INLINE void +ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm) +{ + __load_new_mm_context(next_mm); + tbiap(); +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +#ifdef CONFIG_ALPHA_GENERIC +# define switch_mm(a,b,c) alpha_mv.mv_switch_mm((a),(b),(c)) +# define activate_mm(x,y) alpha_mv.mv_activate_mm((x),(y)) +#else +# ifdef CONFIG_ALPHA_EV4 +# define switch_mm(a,b,c) ev4_switch_mm((a),(b),(c)) +# define activate_mm(x,y) ev4_activate_mm((x),(y)) +# else +# define switch_mm(a,b,c) ev5_switch_mm((a),(b),(c)) +# define activate_mm(x,y) ev5_activate_mm((x),(y)) +# endif +#endif + +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + int i; + + for_each_online_cpu(i) + mm->context[i] = 0; + if (tsk != current) + task_thread_info(tsk)->pcb.ptbr + = ((unsigned long)mm->pgd - IDENT_ADDR) >> PAGE_SHIFT; + return 0; +} + +extern inline void +destroy_context(struct mm_struct *mm) +{ + /* Nothing to do. */ +} + +static inline void +enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ + task_thread_info(tsk)->pcb.ptbr + = ((unsigned long)mm->pgd - IDENT_ADDR) >> PAGE_SHIFT; +} + +#ifdef __MMU_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __MMU_EXTERN_INLINE +#endif + +#endif /* __ALPHA_MMU_CONTEXT_H */ diff --git a/arch/alpha/include/asm/mmzone.h b/arch/alpha/include/asm/mmzone.h new file mode 100644 index 000000000000..8af56ce346ad --- /dev/null +++ b/arch/alpha/include/asm/mmzone.h @@ -0,0 +1,115 @@ +/* + * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99 + * Adapted for the alpha wildfire architecture Jan 2001. + */ +#ifndef _ASM_MMZONE_H_ +#define _ASM_MMZONE_H_ + +#include <asm/smp.h> + +struct bootmem_data_t; /* stupid forward decl. */ + +/* + * Following are macros that are specific to this numa platform. + */ + +extern pg_data_t node_data[]; + +#define alpha_pa_to_nid(pa) \ + (alpha_mv.pa_to_nid \ + ? alpha_mv.pa_to_nid(pa) \ + : (0)) +#define node_mem_start(nid) \ + (alpha_mv.node_mem_start \ + ? alpha_mv.node_mem_start(nid) \ + : (0UL)) +#define node_mem_size(nid) \ + (alpha_mv.node_mem_size \ + ? alpha_mv.node_mem_size(nid) \ + : ((nid) ? (0UL) : (~0UL))) + +#define pa_to_nid(pa) alpha_pa_to_nid(pa) +#define NODE_DATA(nid) (&node_data[(nid)]) + +#define node_localnr(pfn, nid) ((pfn) - NODE_DATA(nid)->node_start_pfn) + +#if 1 +#define PLAT_NODE_DATA_LOCALNR(p, n) \ + (((p) >> PAGE_SHIFT) - PLAT_NODE_DATA(n)->gendata.node_start_pfn) +#else +static inline unsigned long +PLAT_NODE_DATA_LOCALNR(unsigned long p, int n) +{ + unsigned long temp; + temp = p >> PAGE_SHIFT; + return temp - PLAT_NODE_DATA(n)->gendata.node_start_pfn; +} +#endif + +#ifdef CONFIG_DISCONTIGMEM + +/* + * Following are macros that each numa implementation must define. + */ + +/* + * Given a kernel address, find the home node of the underlying memory. + */ +#define kvaddr_to_nid(kaddr) pa_to_nid(__pa(kaddr)) +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) + +/* + * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory + * and returns the kaddr corresponding to first physical page in the + * node's mem_map. + */ +#define LOCAL_BASE_ADDR(kaddr) \ + ((unsigned long)__va(NODE_DATA(kvaddr_to_nid(kaddr))->node_start_pfn \ + << PAGE_SHIFT)) + +/* XXX: FIXME -- wli */ +#define kern_addr_valid(kaddr) (0) + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) + +#define VALID_PAGE(page) (((page) - mem_map) < max_mapnr) + +#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> 32)) +#define pgd_page(pgd) (pfn_to_page(pgd_val(pgd) >> 32)) +#define pte_pfn(pte) (pte_val(pte) >> 32) + +#define mk_pte(page, pgprot) \ +({ \ + pte_t pte; \ + unsigned long pfn; \ + \ + pfn = page_to_pfn(page) << 32; \ + pte_val(pte) = pfn | pgprot_val(pgprot); \ + \ + pte; \ +}) + +#define pte_page(x) \ +({ \ + unsigned long kvirt; \ + struct page * __xx; \ + \ + kvirt = (unsigned long)__va(pte_val(x) >> (32-PAGE_SHIFT)); \ + __xx = virt_to_page(kvirt); \ + \ + __xx; \ +}) + +#define page_to_pa(page) \ + (page_to_pfn(page) << PAGE_SHIFT) + +#define pfn_to_nid(pfn) pa_to_nid(((u64)(pfn) << PAGE_SHIFT)) +#define pfn_valid(pfn) \ + (((pfn) - node_start_pfn(pfn_to_nid(pfn))) < \ + node_spanned_pages(pfn_to_nid(pfn))) \ + +#define virt_addr_valid(kaddr) pfn_valid((__pa(kaddr) >> PAGE_SHIFT)) + +#endif /* CONFIG_DISCONTIGMEM */ + +#endif /* _ASM_MMZONE_H_ */ diff --git a/arch/alpha/include/asm/module.h b/arch/alpha/include/asm/module.h new file mode 100644 index 000000000000..7b63743c534a --- /dev/null +++ b/arch/alpha/include/asm/module.h @@ -0,0 +1,23 @@ +#ifndef _ALPHA_MODULE_H +#define _ALPHA_MODULE_H + +struct mod_arch_specific +{ + unsigned int gotsecindex; +}; + +#define Elf_Sym Elf64_Sym +#define Elf_Shdr Elf64_Shdr +#define Elf_Ehdr Elf64_Ehdr +#define Elf_Phdr Elf64_Phdr +#define Elf_Dyn Elf64_Dyn +#define Elf_Rel Elf64_Rel +#define Elf_Rela Elf64_Rela + +#define ARCH_SHF_SMALL SHF_ALPHA_GPREL + +#ifdef MODULE +asm(".section .got,\"aws\",@progbits; .align 3; .previous"); +#endif + +#endif /*_ALPHA_MODULE_H*/ diff --git a/arch/alpha/include/asm/msgbuf.h b/arch/alpha/include/asm/msgbuf.h new file mode 100644 index 000000000000..98496501a2bb --- /dev/null +++ b/arch/alpha/include/asm/msgbuf.h @@ -0,0 +1,27 @@ +#ifndef _ALPHA_MSGBUF_H +#define _ALPHA_MSGBUF_H + +/* + * The msqid64_ds structure for alpha architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 2 miscellaneous 64-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + __kernel_time_t msg_rtime; /* last msgrcv time */ + __kernel_time_t msg_ctime; /* last change time */ + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ALPHA_MSGBUF_H */ diff --git a/arch/alpha/include/asm/mutex.h b/arch/alpha/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/alpha/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include <asm-generic/mutex-dec.h> diff --git a/arch/alpha/include/asm/page.h b/arch/alpha/include/asm/page.h new file mode 100644 index 000000000000..0995f9d13417 --- /dev/null +++ b/arch/alpha/include/asm/page.h @@ -0,0 +1,98 @@ +#ifndef _ALPHA_PAGE_H +#define _ALPHA_PAGE_H + +#include <linux/const.h> +#include <asm/pal.h> + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 13 +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#ifndef __ASSEMBLY__ + +#define STRICT_MM_TYPECHECKS + +extern void clear_page(void *page); +#define clear_user_page(page, vaddr, pg) clear_page(page) + +#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ + alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vmaddr) +#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE + +extern void copy_page(void * _to, void * _from); +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +#ifdef STRICT_MM_TYPECHECKS +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd; } pmd_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#else +/* + * .. while these make it easier on the compiler + */ +typedef unsigned long pte_t; +typedef unsigned long pmd_t; +typedef unsigned long pgd_t; +typedef unsigned long pgprot_t; + +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) (x) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pgd(x) (x) +#define __pgprot(x) (x) + +#endif /* STRICT_MM_TYPECHECKS */ + +typedef struct page *pgtable_t; + +#ifdef USE_48_BIT_KSEG +#define PAGE_OFFSET 0xffff800000000000UL +#else +#define PAGE_OFFSET 0xfffffc0000000000UL +#endif + +#else + +#ifdef USE_48_BIT_KSEG +#define PAGE_OFFSET 0xffff800000000000 +#else +#define PAGE_OFFSET 0xfffffc0000000000 +#endif + +#endif /* !__ASSEMBLY__ */ + +#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET) +#define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET)) +#ifndef CONFIG_DISCONTIGMEM +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) + +#define pfn_valid(pfn) ((pfn) < max_mapnr) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) +#endif /* CONFIG_DISCONTIGMEM */ + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#include <asm-generic/memory_model.h> +#include <asm-generic/page.h> + +#endif /* _ALPHA_PAGE_H */ diff --git a/arch/alpha/include/asm/pal.h b/arch/alpha/include/asm/pal.h new file mode 100644 index 000000000000..9b4ba0d6f00b --- /dev/null +++ b/arch/alpha/include/asm/pal.h @@ -0,0 +1,51 @@ +#ifndef __ALPHA_PAL_H +#define __ALPHA_PAL_H + +/* + * Common PAL-code + */ +#define PAL_halt 0 +#define PAL_cflush 1 +#define PAL_draina 2 +#define PAL_bpt 128 +#define PAL_bugchk 129 +#define PAL_chmk 131 +#define PAL_callsys 131 +#define PAL_imb 134 +#define PAL_rduniq 158 +#define PAL_wruniq 159 +#define PAL_gentrap 170 +#define PAL_nphalt 190 + +/* + * VMS specific PAL-code + */ +#define PAL_swppal 10 +#define PAL_mfpr_vptb 41 + +/* + * OSF specific PAL-code + */ +#define PAL_cserve 9 +#define PAL_wripir 13 +#define PAL_rdmces 16 +#define PAL_wrmces 17 +#define PAL_wrfen 43 +#define PAL_wrvptptr 45 +#define PAL_jtopal 46 +#define PAL_swpctx 48 +#define PAL_wrval 49 +#define PAL_rdval 50 +#define PAL_tbi 51 +#define PAL_wrent 52 +#define PAL_swpipl 53 +#define PAL_rdps 54 +#define PAL_wrkgp 55 +#define PAL_wrusp 56 +#define PAL_wrperfmon 57 +#define PAL_rdusp 58 +#define PAL_whami 60 +#define PAL_retsys 61 +#define PAL_rti 63 + +#endif /* __ALPHA_PAL_H */ diff --git a/arch/alpha/include/asm/param.h b/arch/alpha/include/asm/param.h new file mode 100644 index 000000000000..e691ecfedb2c --- /dev/null +++ b/arch/alpha/include/asm/param.h @@ -0,0 +1,27 @@ +#ifndef _ASM_ALPHA_PARAM_H +#define _ASM_ALPHA_PARAM_H + +/* ??? Gross. I don't want to parameterize this, and supposedly the + hardware ignores reprogramming. We also need userland buy-in to the + change in HZ, since this is visible in the wait4 resources etc. */ + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ +#define USER_HZ HZ +#else +#define HZ 1024 +#endif + +#define EXEC_PAGESIZE 8192 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#ifdef __KERNEL__ +# define CLOCKS_PER_SEC HZ /* frequency at which times() counts */ +#endif + +#endif /* _ASM_ALPHA_PARAM_H */ diff --git a/arch/alpha/include/asm/parport.h b/arch/alpha/include/asm/parport.h new file mode 100644 index 000000000000..c5ee7cbb2fcd --- /dev/null +++ b/arch/alpha/include/asm/parport.h @@ -0,0 +1,18 @@ +/* + * parport.h: platform-specific PC-style parport initialisation + * + * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk> + * + * This file should only be included by drivers/parport/parport_pc.c. + */ + +#ifndef _ASM_AXP_PARPORT_H +#define _ASM_AXP_PARPORT_H 1 + +static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); +static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) +{ + return parport_pc_find_isa_ports (autoirq, autodma); +} + +#endif /* !(_ASM_AXP_PARPORT_H) */ diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h new file mode 100644 index 000000000000..2a14302c17a3 --- /dev/null +++ b/arch/alpha/include/asm/pci.h @@ -0,0 +1,276 @@ +#ifndef __ALPHA_PCI_H +#define __ALPHA_PCI_H + +#ifdef __KERNEL__ + +#include <linux/spinlock.h> +#include <linux/dma-mapping.h> +#include <asm/scatterlist.h> +#include <asm/machvec.h> + +/* + * The following structure is used to manage multiple PCI busses. + */ + +struct pci_dev; +struct pci_bus; +struct resource; +struct pci_iommu_arena; +struct page; + +/* A controller. Used to manage multiple PCI busses. */ + +struct pci_controller { + struct pci_controller *next; + struct pci_bus *bus; + struct resource *io_space; + struct resource *mem_space; + + /* The following are for reporting to userland. The invariant is + that if we report a BWX-capable dense memory, we do not report + a sparse memory at all, even if it exists. */ + unsigned long sparse_mem_base; + unsigned long dense_mem_base; + unsigned long sparse_io_base; + unsigned long dense_io_base; + + /* This one's for the kernel only. It's in KSEG somewhere. */ + unsigned long config_space_base; + + unsigned int index; + /* For compatibility with current (as of July 2003) pciutils + and XFree86. Eventually will be removed. */ + unsigned int need_domain_info; + + struct pci_iommu_arena *sg_pci; + struct pci_iommu_arena *sg_isa; + + void *sysdata; +}; + +/* Override the logic in pci_scan_bus for skipping already-configured + bus numbers. */ + +#define pcibios_assign_all_busses() 1 +#define pcibios_scan_all_fns(a, b) 0 + +#define PCIBIOS_MIN_IO alpha_mv.min_io_address +#define PCIBIOS_MIN_MEM alpha_mv.min_mem_address + +extern void pcibios_set_master(struct pci_dev *dev); + +extern inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* IOMMU controls. */ + +/* The PCI address space does not equal the physical memory address space. + The networking and block device layers use this boolean for bounce buffer + decisions. */ +#define PCI_DMA_BUS_IS_PHYS 0 + +/* Allocate and map kernel buffer using consistent mode DMA for PCI + device. Returns non-NULL cpu-view pointer to the buffer if + successful and sets *DMA_ADDRP to the pci side dma address as well, + else DMA_ADDRP is undefined. */ + +extern void *__pci_alloc_consistent(struct pci_dev *, size_t, + dma_addr_t *, gfp_t); +static inline void * +pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma) +{ + return __pci_alloc_consistent(dev, size, dma, GFP_ATOMIC); +} + +/* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must + be values that were returned from pci_alloc_consistent. SIZE must + be the same as what as passed into pci_alloc_consistent. + References to the memory and mappings associated with CPU_ADDR or + DMA_ADDR past this call are illegal. */ + +extern void pci_free_consistent(struct pci_dev *, size_t, void *, dma_addr_t); + +/* Map a single buffer of the indicate size for PCI DMA in streaming mode. + The 32-bit PCI bus mastering address to use is returned. Once the device + is given the dma address, the device owns this memory until either + pci_unmap_single or pci_dma_sync_single_for_cpu is performed. */ + +extern dma_addr_t pci_map_single(struct pci_dev *, void *, size_t, int); + +/* Likewise, but for a page instead of an address. */ +extern dma_addr_t pci_map_page(struct pci_dev *, struct page *, + unsigned long, size_t, int); + +/* Test for pci_map_single or pci_map_page having generated an error. */ + +static inline int +pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr) +{ + return dma_addr == 0; +} + +/* Unmap a single streaming mode DMA translation. The DMA_ADDR and + SIZE must match what was provided for in a previous pci_map_single + call. All other usages are undefined. After this call, reads by + the cpu to the buffer are guaranteed to see whatever the device + wrote there. */ + +extern void pci_unmap_single(struct pci_dev *, dma_addr_t, size_t, int); +extern void pci_unmap_page(struct pci_dev *, dma_addr_t, size_t, int); + +/* pci_unmap_{single,page} is not a nop, thus... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) + +/* Map a set of buffers described by scatterlist in streaming mode for + PCI DMA. This is the scatter-gather version of the above + pci_map_single interface. Here the scatter gather list elements + are each tagged with the appropriate PCI dma address and length. + They are obtained via sg_dma_{address,length}(SG). + + NOTE: An implementation may be able to use a smaller number of DMA + address/length pairs than there are SG table elements. (for + example via virtual mapping capabilities) The routine returns the + number of addr/length pairs actually used, at most nents. + + Device ownership issues as mentioned above for pci_map_single are + the same here. */ + +extern int pci_map_sg(struct pci_dev *, struct scatterlist *, int, int); + +/* Unmap a set of streaming mode DMA translations. Again, cpu read + rules concerning calls here are the same as for pci_unmap_single() + above. */ + +extern void pci_unmap_sg(struct pci_dev *, struct scatterlist *, int, int); + +/* Make physical memory consistent for a single streaming mode DMA + translation after a transfer and device currently has ownership + of the buffer. + + If you perform a pci_map_single() but wish to interrogate the + buffer using the cpu, yet do not wish to teardown the PCI dma + mapping, you must call this function before doing so. At the next + point you give the PCI dma address back to the card, you must first + perform a pci_dma_sync_for_device, and then the device again owns + the buffer. */ + +static inline void +pci_dma_sync_single_for_cpu(struct pci_dev *dev, dma_addr_t dma_addr, + long size, int direction) +{ + /* Nothing to do. */ +} + +static inline void +pci_dma_sync_single_for_device(struct pci_dev *dev, dma_addr_t dma_addr, + size_t size, int direction) +{ + /* Nothing to do. */ +} + +/* Make physical memory consistent for a set of streaming mode DMA + translations after a transfer. The same as pci_dma_sync_single_* + but for a scatter-gather list, same rules and usage. */ + +static inline void +pci_dma_sync_sg_for_cpu(struct pci_dev *dev, struct scatterlist *sg, + int nents, int direction) +{ + /* Nothing to do. */ +} + +static inline void +pci_dma_sync_sg_for_device(struct pci_dev *dev, struct scatterlist *sg, + int nents, int direction) +{ + /* Nothing to do. */ +} + +/* Return whether the given PCI device DMA address mask can + be supported properly. For example, if your device can + only drive the low 24-bits during PCI bus mastering, then + you would pass 0x00ffffff as the mask to this function. */ + +extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask); + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + unsigned long cacheline_size; + u8 byte; + + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte); + if (byte == 0) + cacheline_size = 1024; + else + cacheline_size = (int) byte * 4; + + *strat = PCI_DMA_BURST_BOUNDARY; + *strategy_parameter = cacheline_size; +} +#endif + +/* TODO: integrate with include/asm-generic/pci.h ? */ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? 15 : 14; +} + +extern void pcibios_resource_to_bus(struct pci_dev *, struct pci_bus_region *, + struct resource *); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); + +static inline struct resource * +pcibios_select_root(struct pci_dev *pdev, struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index + +static inline int pci_proc_domain(struct pci_bus *bus) +{ + struct pci_controller *hose = bus->sysdata; + return hose->need_domain_info; +} + +struct pci_dev *alpha_gendev_to_pci(struct device *dev); + +#endif /* __KERNEL__ */ + +/* Values for the `which' argument to sys_pciconfig_iobase. */ +#define IOBASE_HOSE 0 +#define IOBASE_SPARSE_MEM 1 +#define IOBASE_DENSE_MEM 2 +#define IOBASE_SPARSE_IO 3 +#define IOBASE_DENSE_IO 4 +#define IOBASE_ROOT_BUS 5 +#define IOBASE_FROM_HOSE 0x10000 + +extern struct pci_dev *isa_bridge; + +#endif /* __ALPHA_PCI_H */ diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h new file mode 100644 index 000000000000..3495e8e00d70 --- /dev/null +++ b/arch/alpha/include/asm/percpu.h @@ -0,0 +1,78 @@ +#ifndef __ALPHA_PERCPU_H +#define __ALPHA_PERCPU_H +#include <linux/compiler.h> +#include <linux/threads.h> + +/* + * Determine the real variable name from the name visible in the + * kernel sources. + */ +#define per_cpu_var(var) per_cpu__##var + +#ifdef CONFIG_SMP + +/* + * per_cpu_offset() is the offset that has to be added to a + * percpu variable to get to the instance for a certain processor. + */ +extern unsigned long __per_cpu_offset[NR_CPUS]; + +#define per_cpu_offset(x) (__per_cpu_offset[x]) + +#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id()) +#ifdef CONFIG_DEBUG_PREEMPT +#define my_cpu_offset per_cpu_offset(smp_processor_id()) +#else +#define my_cpu_offset __my_cpu_offset +#endif + +#ifndef MODULE +#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset)) +#define PER_CPU_ATTRIBUTES +#else +/* + * To calculate addresses of locally defined variables, GCC uses 32-bit + * displacement from the GP. Which doesn't work for per cpu variables in + * modules, as an offset to the kernel per cpu area is way above 4G. + * + * This forces allocation of a GOT entry for per cpu variable using + * ldq instruction with a 'literal' relocation. + */ +#define SHIFT_PERCPU_PTR(var, offset) ({ \ + extern int simple_identifier_##var(void); \ + unsigned long __ptr, tmp_gp; \ + asm ( "br %1, 1f \n\ + 1: ldgp %1, 0(%1) \n\ + ldq %0, per_cpu__" #var"(%1)\t!literal" \ + : "=&r"(__ptr), "=&r"(tmp_gp)); \ + (typeof(&per_cpu_var(var)))(__ptr + (offset)); }) + +#define PER_CPU_ATTRIBUTES __used + +#endif /* MODULE */ + +/* + * A percpu variable may point to a discarded regions. The following are + * established ways to produce a usable pointer from the percpu variable + * offset. + */ +#define per_cpu(var, cpu) \ + (*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu))) +#define __get_cpu_var(var) \ + (*SHIFT_PERCPU_PTR(var, my_cpu_offset)) +#define __raw_get_cpu_var(var) \ + (*SHIFT_PERCPU_PTR(var, __my_cpu_offset)) + +#else /* ! SMP */ + +#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu_var(var))) +#define __get_cpu_var(var) per_cpu_var(var) +#define __raw_get_cpu_var(var) per_cpu_var(var) + +#define PER_CPU_ATTRIBUTES + +#endif /* SMP */ + +#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name) + +#endif /* __ALPHA_PERCPU_H */ diff --git a/arch/alpha/include/asm/pgalloc.h b/arch/alpha/include/asm/pgalloc.h new file mode 100644 index 000000000000..fd090155dccd --- /dev/null +++ b/arch/alpha/include/asm/pgalloc.h @@ -0,0 +1,83 @@ +#ifndef _ALPHA_PGALLOC_H +#define _ALPHA_PGALLOC_H + +#include <linux/mm.h> +#include <linux/mmzone.h> + +/* + * Allocate and free page tables. The xxx_kernel() versions are + * used to allocate a kernel page table - this turns on ASN bits + * if any. + */ + +static inline void +pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte) +{ + pmd_set(pmd, (pte_t *)(page_to_pa(pte) + PAGE_OFFSET)); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +static inline void +pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) +{ + pmd_set(pmd, pte); +} + +static inline void +pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd) +{ + pgd_set(pgd, pmd); +} + +extern pgd_t *pgd_alloc(struct mm_struct *mm); + +static inline void +pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + free_page((unsigned long)pgd); +} + +static inline pmd_t * +pmd_alloc_one(struct mm_struct *mm, unsigned long address) +{ + pmd_t *ret = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + return ret; +} + +static inline void +pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ + free_page((unsigned long)pmd); +} + +extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); + +static inline void +pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long)pte); +} + +static inline pgtable_t +pte_alloc_one(struct mm_struct *mm, unsigned long address) +{ + pte_t *pte = pte_alloc_one_kernel(mm, address); + struct page *page; + + if (!pte) + return NULL; + page = virt_to_page(pte); + pgtable_page_ctor(page); + return page; +} + +static inline void +pte_free(struct mm_struct *mm, pgtable_t page) +{ + pgtable_page_dtor(page); + __free_page(page); +} + +#define check_pgt_cache() do { } while (0) + +#endif /* _ALPHA_PGALLOC_H */ diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h new file mode 100644 index 000000000000..3f0c59f6d8aa --- /dev/null +++ b/arch/alpha/include/asm/pgtable.h @@ -0,0 +1,380 @@ +#ifndef _ALPHA_PGTABLE_H +#define _ALPHA_PGTABLE_H + +#include <asm-generic/4level-fixup.h> + +/* + * This file contains the functions and defines necessary to modify and use + * the Alpha page table tree. + * + * This hopefully works with any standard Alpha page-size, as defined + * in <asm/page.h> (currently 8192). + */ +#include <linux/mmzone.h> + +#include <asm/page.h> +#include <asm/processor.h> /* For TASK_SIZE */ +#include <asm/machvec.h> + +struct mm_struct; +struct vm_area_struct; + +/* Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval)) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* PMD_SHIFT determines the size of the area a second-level page table can map */ +#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT-3)) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define PGDIR_SHIFT (PAGE_SHIFT + 2*(PAGE_SHIFT-3)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * Entries per page directory level: the Alpha is three-level, with + * all levels having a one-page page table. + */ +#define PTRS_PER_PTE (1UL << (PAGE_SHIFT-3)) +#define PTRS_PER_PMD (1UL << (PAGE_SHIFT-3)) +#define PTRS_PER_PGD (1UL << (PAGE_SHIFT-3)) +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +/* Number of pointers that fit on a page: this will go away. */ +#define PTRS_PER_PAGE (1UL << (PAGE_SHIFT-3)) + +#ifdef CONFIG_ALPHA_LARGE_VMALLOC +#define VMALLOC_START 0xfffffe0000000000 +#else +#define VMALLOC_START (-2*PGDIR_SIZE) +#endif +#define VMALLOC_END (-PGDIR_SIZE) + +/* + * OSF/1 PAL-code-imposed page table bits + */ +#define _PAGE_VALID 0x0001 +#define _PAGE_FOR 0x0002 /* used for page protection (fault on read) */ +#define _PAGE_FOW 0x0004 /* used for page protection (fault on write) */ +#define _PAGE_FOE 0x0008 /* used for page protection (fault on exec) */ +#define _PAGE_ASM 0x0010 +#define _PAGE_KRE 0x0100 /* xxx - see below on the "accessed" bit */ +#define _PAGE_URE 0x0200 /* xxx */ +#define _PAGE_KWE 0x1000 /* used to do the dirty bit in software */ +#define _PAGE_UWE 0x2000 /* used to do the dirty bit in software */ + +/* .. and these are ours ... */ +#define _PAGE_DIRTY 0x20000 +#define _PAGE_ACCESSED 0x40000 +#define _PAGE_FILE 0x80000 /* set:pagecache, unset:swap */ + +/* + * NOTE! The "accessed" bit isn't necessarily exact: it can be kept exactly + * by software (use the KRE/URE/KWE/UWE bits appropriately), but I'll fake it. + * Under Linux/AXP, the "accessed" bit just means "read", and I'll just use + * the KRE/URE bits to watch for it. That way we don't need to overload the + * KWE/UWE bits with both handling dirty and accessed. + * + * Note that the kernel uses the accessed bit just to check whether to page + * out a page or not, so it doesn't have to be exact anyway. + */ + +#define __DIRTY_BITS (_PAGE_DIRTY | _PAGE_KWE | _PAGE_UWE) +#define __ACCESS_BITS (_PAGE_ACCESSED | _PAGE_KRE | _PAGE_URE) + +#define _PFN_MASK 0xFFFFFFFF00000000UL + +#define _PAGE_TABLE (_PAGE_VALID | __DIRTY_BITS | __ACCESS_BITS) +#define _PAGE_CHG_MASK (_PFN_MASK | __DIRTY_BITS | __ACCESS_BITS) + +/* + * All the normal masks have the "page accessed" bits on, as any time they are used, + * the page is accessed. They are cleared only by the page-out routines + */ +#define PAGE_NONE __pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOR | _PAGE_FOW | _PAGE_FOE) +#define PAGE_SHARED __pgprot(_PAGE_VALID | __ACCESS_BITS) +#define PAGE_COPY __pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOW) +#define PAGE_READONLY __pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOW) +#define PAGE_KERNEL __pgprot(_PAGE_VALID | _PAGE_ASM | _PAGE_KRE | _PAGE_KWE) + +#define _PAGE_NORMAL(x) __pgprot(_PAGE_VALID | __ACCESS_BITS | (x)) + +#define _PAGE_P(x) _PAGE_NORMAL((x) | (((x) & _PAGE_FOW)?0:_PAGE_FOW)) +#define _PAGE_S(x) _PAGE_NORMAL(x) + +/* + * The hardware can handle write-only mappings, but as the Alpha + * architecture does byte-wide writes with a read-modify-write + * sequence, it's not practical to have write-without-read privs. + * Thus the "-w- -> rw-" and "-wx -> rwx" mapping here (and in + * arch/alpha/mm/fault.c) + */ + /* xwr */ +#define __P000 _PAGE_P(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR) +#define __P001 _PAGE_P(_PAGE_FOE | _PAGE_FOW) +#define __P010 _PAGE_P(_PAGE_FOE) +#define __P011 _PAGE_P(_PAGE_FOE) +#define __P100 _PAGE_P(_PAGE_FOW | _PAGE_FOR) +#define __P101 _PAGE_P(_PAGE_FOW) +#define __P110 _PAGE_P(0) +#define __P111 _PAGE_P(0) + +#define __S000 _PAGE_S(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR) +#define __S001 _PAGE_S(_PAGE_FOE | _PAGE_FOW) +#define __S010 _PAGE_S(_PAGE_FOE) +#define __S011 _PAGE_S(_PAGE_FOE) +#define __S100 _PAGE_S(_PAGE_FOW | _PAGE_FOR) +#define __S101 _PAGE_S(_PAGE_FOW) +#define __S110 _PAGE_S(0) +#define __S111 _PAGE_S(0) + +/* + * pgprot_noncached() is only for infiniband pci support, and a real + * implementation for RAM would be more complicated. + */ +#define pgprot_noncached(prot) (prot) + +/* + * BAD_PAGETABLE is used when we need a bogus page-table, while + * BAD_PAGE is used for a bogus page. + * + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern pte_t __bad_page(void); +extern pmd_t * __bad_pagetable(void); + +extern unsigned long __zero_page(void); + +#define BAD_PAGETABLE __bad_pagetable() +#define BAD_PAGE __bad_page() +#define ZERO_PAGE(vaddr) (virt_to_page(ZERO_PGE)) + +/* number of bits that fit into a memory pointer */ +#define BITS_PER_PTR (8*sizeof(unsigned long)) + +/* to align the pointer to a pointer address */ +#define PTR_MASK (~(sizeof(void*)-1)) + +/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */ +#define SIZEOF_PTR_LOG2 3 + +/* to find an entry in a page-table */ +#define PAGE_PTR(address) \ + ((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK) + +/* + * On certain platforms whose physical address space can overlap KSEG, + * namely EV6 and above, we must re-twiddle the physaddr to restore the + * correct high-order bits. + * + * This is extremely confusing until you realize that this is actually + * just working around a userspace bug. The X server was intending to + * provide the physical address but instead provided the KSEG address. + * Or tried to, except it's not representable. + * + * On Tsunami there's nothing meaningful at 0x40000000000, so this is + * a safe thing to do. Come the first core logic that does put something + * in this area -- memory or whathaveyou -- then this hack will have + * to go away. So be prepared! + */ + +#if defined(CONFIG_ALPHA_GENERIC) && defined(USE_48_BIT_KSEG) +#error "EV6-only feature in a generic kernel" +#endif +#if defined(CONFIG_ALPHA_GENERIC) || \ + (defined(CONFIG_ALPHA_EV6) && !defined(USE_48_BIT_KSEG)) +#define KSEG_PFN (0xc0000000000UL >> PAGE_SHIFT) +#define PHYS_TWIDDLE(pfn) \ + ((((pfn) & KSEG_PFN) == (0x40000000000UL >> PAGE_SHIFT)) \ + ? ((pfn) ^= KSEG_PFN) : (pfn)) +#else +#define PHYS_TWIDDLE(pfn) (pfn) +#endif + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#ifndef CONFIG_DISCONTIGMEM +#define page_to_pa(page) (((page) - mem_map) << PAGE_SHIFT) + +#define pte_pfn(pte) (pte_val(pte) >> 32) +#define pte_page(pte) pfn_to_page(pte_pfn(pte)) +#define mk_pte(page, pgprot) \ +({ \ + pte_t pte; \ + \ + pte_val(pte) = (page_to_pfn(page) << 32) | pgprot_val(pgprot); \ + pte; \ +}) +#endif + +extern inline pte_t pfn_pte(unsigned long physpfn, pgprot_t pgprot) +{ pte_t pte; pte_val(pte) = (PHYS_TWIDDLE(physpfn) << 32) | pgprot_val(pgprot); return pte; } + +extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; } + +extern inline void pmd_set(pmd_t * pmdp, pte_t * ptep) +{ pmd_val(*pmdp) = _PAGE_TABLE | ((((unsigned long) ptep) - PAGE_OFFSET) << (32-PAGE_SHIFT)); } + +extern inline void pgd_set(pgd_t * pgdp, pmd_t * pmdp) +{ pgd_val(*pgdp) = _PAGE_TABLE | ((((unsigned long) pmdp) - PAGE_OFFSET) << (32-PAGE_SHIFT)); } + + +extern inline unsigned long +pmd_page_vaddr(pmd_t pmd) +{ + return ((pmd_val(pmd) & _PFN_MASK) >> (32-PAGE_SHIFT)) + PAGE_OFFSET; +} + +#ifndef CONFIG_DISCONTIGMEM +#define pmd_page(pmd) (mem_map + ((pmd_val(pmd) & _PFN_MASK) >> 32)) +#define pgd_page(pgd) (mem_map + ((pgd_val(pgd) & _PFN_MASK) >> 32)) +#endif + +extern inline unsigned long pgd_page_vaddr(pgd_t pgd) +{ return PAGE_OFFSET + ((pgd_val(pgd) & _PFN_MASK) >> (32-PAGE_SHIFT)); } + +extern inline int pte_none(pte_t pte) { return !pte_val(pte); } +extern inline int pte_present(pte_t pte) { return pte_val(pte) & _PAGE_VALID; } +extern inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + pte_val(*ptep) = 0; +} + +extern inline int pmd_none(pmd_t pmd) { return !pmd_val(pmd); } +extern inline int pmd_bad(pmd_t pmd) { return (pmd_val(pmd) & ~_PFN_MASK) != _PAGE_TABLE; } +extern inline int pmd_present(pmd_t pmd) { return pmd_val(pmd) & _PAGE_VALID; } +extern inline void pmd_clear(pmd_t * pmdp) { pmd_val(*pmdp) = 0; } + +extern inline int pgd_none(pgd_t pgd) { return !pgd_val(pgd); } +extern inline int pgd_bad(pgd_t pgd) { return (pgd_val(pgd) & ~_PFN_MASK) != _PAGE_TABLE; } +extern inline int pgd_present(pgd_t pgd) { return pgd_val(pgd) & _PAGE_VALID; } +extern inline void pgd_clear(pgd_t * pgdp) { pgd_val(*pgdp) = 0; } + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +extern inline int pte_write(pte_t pte) { return !(pte_val(pte) & _PAGE_FOW); } +extern inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } +extern inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +extern inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } +extern inline int pte_special(pte_t pte) { return 0; } + +extern inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) |= _PAGE_FOW; return pte; } +extern inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~(__DIRTY_BITS); return pte; } +extern inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~(__ACCESS_BITS); return pte; } +extern inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) &= ~_PAGE_FOW; return pte; } +extern inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= __DIRTY_BITS; return pte; } +extern inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= __ACCESS_BITS; return pte; } +extern inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, (address)) + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) + +/* + * The smp_read_barrier_depends() in the following functions are required to + * order the load of *dir (the pointer in the top level page table) with any + * subsequent load of the returned pmd_t *ret (ret is data dependent on *dir). + * + * If this ordering is not enforced, the CPU might load an older value of + * *ret, which may be uninitialized data. See mm/memory.c:__pte_alloc for + * more details. + * + * Note that we never change the mm->pgd pointer after the task is running, so + * pgd_offset does not require such a barrier. + */ + +/* Find an entry in the second-level page table.. */ +extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) +{ + pmd_t *ret = (pmd_t *) pgd_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1)); + smp_read_barrier_depends(); /* see above */ + return ret; +} + +/* Find an entry in the third-level page table.. */ +extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address) +{ + pte_t *ret = (pte_t *) pmd_page_vaddr(*dir) + + ((address >> PAGE_SHIFT) & (PTRS_PER_PAGE - 1)); + smp_read_barrier_depends(); /* see above */ + return ret; +} + +#define pte_offset_map(dir,addr) pte_offset_kernel((dir),(addr)) +#define pte_offset_map_nested(dir,addr) pte_offset_kernel((dir),(addr)) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +extern pgd_t swapper_pg_dir[1024]; + +/* + * The Alpha doesn't have any external MMU info: the kernel page + * tables contain all the necessary information. + */ +extern inline void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte) +{ +} + +/* + * Non-present pages: high 24 bits are offset, next 8 bits type, + * low 32 bits zero. + */ +extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset) +{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; } + +#define __swp_type(x) (((x).val >> 32) & 0xff) +#define __swp_offset(x) ((x).val >> 40) +#define __swp_entry(type, off) ((swp_entry_t) { pte_val(mk_swap_pte((type), (off))) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#define pte_to_pgoff(pte) (pte_val(pte) >> 32) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 32) | _PAGE_FILE }) + +#define PTE_FILE_MAX_BITS 32 + +#ifndef CONFIG_DISCONTIGMEM +#define kern_addr_valid(addr) (1) +#endif + +#define io_remap_pfn_range(vma, start, pfn, size, prot) \ + remap_pfn_range(vma, start, pfn, size, prot) + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) + +extern void paging_init(void); + +#include <asm-generic/pgtable.h> + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT. */ +#define HAVE_ARCH_UNMAPPED_AREA + +#endif /* _ALPHA_PGTABLE_H */ diff --git a/arch/alpha/include/asm/poll.h b/arch/alpha/include/asm/poll.h new file mode 100644 index 000000000000..c98509d3149e --- /dev/null +++ b/arch/alpha/include/asm/poll.h @@ -0,0 +1 @@ +#include <asm-generic/poll.h> diff --git a/arch/alpha/include/asm/posix_types.h b/arch/alpha/include/asm/posix_types.h new file mode 100644 index 000000000000..db167413300b --- /dev/null +++ b/arch/alpha/include/asm/posix_types.h @@ -0,0 +1,123 @@ +#ifndef _ALPHA_POSIX_TYPES_H +#define _ALPHA_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned int __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +typedef unsigned int __kernel_nlink_t; +typedef long __kernel_off_t; +typedef long long __kernel_loff_t; +typedef int __kernel_pid_t; +typedef int __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned long __kernel_sigset_t; /* at least 32 bits */ +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef int __kernel_clockid_t; +typedef int __kernel_timer_t; + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +typedef __kernel_uid_t __kernel_old_uid_t; +typedef __kernel_gid_t __kernel_old_gid_t; +typedef __kernel_uid_t __kernel_uid32_t; +typedef __kernel_gid_t __kernel_gid32_t; + +typedef unsigned int __kernel_old_dev_t; + +#ifdef __KERNEL__ + +#ifndef __GNUC__ + +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) +#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0) +#define __FD_ZERO(set) \ + ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) + +#else /* __GNUC__ */ + +/* With GNU C, use inline functions instead so args are evaluated only once: */ + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] |= (1UL<<_rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); +} + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long fd, const __kernel_fd_set *p) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *p) +{ + unsigned long *tmp = p->fds_bits; + int i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; + tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; + return; + + case 8: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + return; + + case 4: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + return; + } + } + i = __FDSET_LONGS; + while (i) { + i--; + *tmp = 0; + tmp++; + } +} + +#endif /* __GNUC__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ALPHA_POSIX_TYPES_H */ diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h new file mode 100644 index 000000000000..94afe5859301 --- /dev/null +++ b/arch/alpha/include/asm/processor.h @@ -0,0 +1,93 @@ +/* + * include/asm-alpha/processor.h + * + * Copyright (C) 1994 Linus Torvalds + */ + +#ifndef __ASM_ALPHA_PROCESSOR_H +#define __ASM_ALPHA_PROCESSOR_H + +#include <linux/personality.h> /* for ADDR_LIMIT_32BIT */ + +/* + * Returns current instruction pointer ("program counter"). + */ +#define current_text_addr() \ + ({ void *__pc; __asm__ ("br %0,.+4" : "=r"(__pc)); __pc; }) + +/* + * We have a 42-bit user address space: 4TB user VM... + */ +#define TASK_SIZE (0x40000000000UL) + +#define STACK_TOP \ + (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL) + +#define STACK_TOP_MAX 0x00120000000UL + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE \ + ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2) + +typedef struct { + unsigned long seg; +} mm_segment_t; + +/* This is dead. Everything has been moved to thread_info. */ +struct thread_struct { }; +#define INIT_THREAD { } + +/* Return saved PC of a blocked thread. */ +struct task_struct; +extern unsigned long thread_saved_pc(struct task_struct *); + +/* Do necessary setup to start up a newly executed thread. */ +extern void start_thread(struct pt_regs *, unsigned long, unsigned long); + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +/* Create a kernel thread without removing it from tasklists. */ +extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) + +#define KSTK_ESP(tsk) \ + ((tsk) == current ? rdusp() : task_thread_info(tsk)->pcb.usp) + +#define cpu_relax() barrier() + +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +#define ARCH_HAS_SPINLOCK_PREFETCH + +#ifndef CONFIG_SMP +/* Nothing to prefetch. */ +#define spin_lock_prefetch(lock) do { } while (0) +#endif + +extern inline void prefetch(const void *ptr) +{ + __builtin_prefetch(ptr, 0, 3); +} + +extern inline void prefetchw(const void *ptr) +{ + __builtin_prefetch(ptr, 1, 3); +} + +#ifdef CONFIG_SMP +extern inline void spin_lock_prefetch(const void *ptr) +{ + __builtin_prefetch(ptr, 1, 3); +} +#endif + +#endif /* __ASM_ALPHA_PROCESSOR_H */ diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h new file mode 100644 index 000000000000..32c7a5cddd59 --- /dev/null +++ b/arch/alpha/include/asm/ptrace.h @@ -0,0 +1,83 @@ +#ifndef _ASMAXP_PTRACE_H +#define _ASMAXP_PTRACE_H + + +/* + * This struct defines the way the registers are stored on the + * kernel stack during a system call or other kernel entry + * + * NOTE! I want to minimize the overhead of system calls, so this + * struct has as little information as possible. I does not have + * + * - floating point regs: the kernel doesn't change those + * - r9-15: saved by the C compiler + * + * This makes "fork()" and "exec()" a bit more complex, but should + * give us low system call latency. + */ + +struct pt_regs { + unsigned long r0; + unsigned long r1; + unsigned long r2; + unsigned long r3; + unsigned long r4; + unsigned long r5; + unsigned long r6; + unsigned long r7; + unsigned long r8; + unsigned long r19; + unsigned long r20; + unsigned long r21; + unsigned long r22; + unsigned long r23; + unsigned long r24; + unsigned long r25; + unsigned long r26; + unsigned long r27; + unsigned long r28; + unsigned long hae; +/* JRP - These are the values provided to a0-a2 by PALcode */ + unsigned long trap_a0; + unsigned long trap_a1; + unsigned long trap_a2; +/* These are saved by PAL-code: */ + unsigned long ps; + unsigned long pc; + unsigned long gp; + unsigned long r16; + unsigned long r17; + unsigned long r18; +}; + +/* + * This is the extended stack used by signal handlers and the context + * switcher: it's pushed after the normal "struct pt_regs". + */ +struct switch_stack { + unsigned long r9; + unsigned long r10; + unsigned long r11; + unsigned long r12; + unsigned long r13; + unsigned long r14; + unsigned long r15; + unsigned long r26; + unsigned long fp[32]; /* fp[31] is fpcr */ +}; + +#ifdef __KERNEL__ + +#define user_mode(regs) (((regs)->ps & 8) != 0) +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) +extern void show_regs(struct pt_regs *); + +#define task_pt_regs(task) \ + ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1) + +#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0) + +#endif + +#endif diff --git a/arch/alpha/include/asm/reg.h b/arch/alpha/include/asm/reg.h new file mode 100644 index 000000000000..86ff916fb069 --- /dev/null +++ b/arch/alpha/include/asm/reg.h @@ -0,0 +1,52 @@ +#ifndef __reg_h__ +#define __reg_h__ + +/* + * Exception frame offsets. + */ +#define EF_V0 0 +#define EF_T0 1 +#define EF_T1 2 +#define EF_T2 3 +#define EF_T3 4 +#define EF_T4 5 +#define EF_T5 6 +#define EF_T6 7 +#define EF_T7 8 +#define EF_S0 9 +#define EF_S1 10 +#define EF_S2 11 +#define EF_S3 12 +#define EF_S4 13 +#define EF_S5 14 +#define EF_S6 15 +#define EF_A3 16 +#define EF_A4 17 +#define EF_A5 18 +#define EF_T8 19 +#define EF_T9 20 +#define EF_T10 21 +#define EF_T11 22 +#define EF_RA 23 +#define EF_T12 24 +#define EF_AT 25 +#define EF_SP 26 +#define EF_PS 27 +#define EF_PC 28 +#define EF_GP 29 +#define EF_A0 30 +#define EF_A1 31 +#define EF_A2 32 + +#define EF_SIZE (33*8) +#define HWEF_SIZE (6*8) /* size of PAL frame (PS-A2) */ + +#define EF_SSIZE (EF_SIZE - HWEF_SIZE) + +/* + * Map register number into core file offset. + */ +#define CORE_REG(reg, ubase) \ + (((unsigned long *)((unsigned long)(ubase)))[reg]) + +#endif /* __reg_h__ */ diff --git a/arch/alpha/include/asm/regdef.h b/arch/alpha/include/asm/regdef.h new file mode 100644 index 000000000000..142df9c4f8b8 --- /dev/null +++ b/arch/alpha/include/asm/regdef.h @@ -0,0 +1,44 @@ +#ifndef __alpha_regdef_h__ +#define __alpha_regdef_h__ + +#define v0 $0 /* function return value */ + +#define t0 $1 /* temporary registers (caller-saved) */ +#define t1 $2 +#define t2 $3 +#define t3 $4 +#define t4 $5 +#define t5 $6 +#define t6 $7 +#define t7 $8 + +#define s0 $9 /* saved-registers (callee-saved registers) */ +#define s1 $10 +#define s2 $11 +#define s3 $12 +#define s4 $13 +#define s5 $14 +#define s6 $15 +#define fp s6 /* frame-pointer (s6 in frame-less procedures) */ + +#define a0 $16 /* argument registers (caller-saved) */ +#define a1 $17 +#define a2 $18 +#define a3 $19 +#define a4 $20 +#define a5 $21 + +#define t8 $22 /* more temps (caller-saved) */ +#define t9 $23 +#define t10 $24 +#define t11 $25 +#define ra $26 /* return address register */ +#define t12 $27 + +#define pv t12 /* procedure-variable register */ +#define AT $at /* assembler temporary */ +#define gp $29 /* global pointer */ +#define sp $30 /* stack pointer */ +#define zero $31 /* reads as zero, writes are noops */ + +#endif /* __alpha_regdef_h__ */ diff --git a/arch/alpha/include/asm/resource.h b/arch/alpha/include/asm/resource.h new file mode 100644 index 000000000000..c10874ff5973 --- /dev/null +++ b/arch/alpha/include/asm/resource.h @@ -0,0 +1,22 @@ +#ifndef _ALPHA_RESOURCE_H +#define _ALPHA_RESOURCE_H + +/* + * Alpha/Linux-specific ordering of these four resource limit IDs, + * the rest comes from the generic header: + */ +#define RLIMIT_NOFILE 6 /* max number of open files */ +#define RLIMIT_AS 7 /* address space limit */ +#define RLIMIT_NPROC 8 /* max number of processes */ +#define RLIMIT_MEMLOCK 9 /* max locked-in-memory address space */ + +/* + * SuS says limits have to be unsigned. Fine, it's unsigned, but + * we retain the old value for compatibility, especially with DU. + * When you run into the 2^63 barrier, you call me. + */ +#define RLIM_INFINITY 0x7ffffffffffffffful + +#include <asm-generic/resource.h> + +#endif /* _ALPHA_RESOURCE_H */ diff --git a/arch/alpha/include/asm/rtc.h b/arch/alpha/include/asm/rtc.h new file mode 100644 index 000000000000..4e854b1333eb --- /dev/null +++ b/arch/alpha/include/asm/rtc.h @@ -0,0 +1,10 @@ +#ifndef _ALPHA_RTC_H +#define _ALPHA_RTC_H + +/* + * Alpha uses the default access methods for the RTC. + */ + +#include <asm-generic/rtc.h> + +#endif diff --git a/arch/alpha/include/asm/rwsem.h b/arch/alpha/include/asm/rwsem.h new file mode 100644 index 000000000000..1570c0b54336 --- /dev/null +++ b/arch/alpha/include/asm/rwsem.h @@ -0,0 +1,259 @@ +#ifndef _ALPHA_RWSEM_H +#define _ALPHA_RWSEM_H + +/* + * Written by Ivan Kokshaysky <ink@jurassic.park.msu.ru>, 2001. + * Based on asm-alpha/semaphore.h and asm-i386/rwsem.h + */ + +#ifndef _LINUX_RWSEM_H +#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" +#endif + +#ifdef __KERNEL__ + +#include <linux/compiler.h> +#include <linux/list.h> +#include <linux/spinlock.h> + +struct rwsem_waiter; + +extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *); +extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); + +/* + * the semaphore definition + */ +struct rw_semaphore { + long count; +#define RWSEM_UNLOCKED_VALUE 0x0000000000000000L +#define RWSEM_ACTIVE_BIAS 0x0000000000000001L +#define RWSEM_ACTIVE_MASK 0x00000000ffffffffL +#define RWSEM_WAITING_BIAS (-0x0000000100000000L) +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + spinlock_t wait_lock; + struct list_head wait_list; +}; + +#define __RWSEM_INITIALIZER(name) \ + { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + LIST_HEAD_INIT((name).wait_list) } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +static inline void init_rwsem(struct rw_semaphore *sem) +{ + sem->count = RWSEM_UNLOCKED_VALUE; + spin_lock_init(&sem->wait_lock); + INIT_LIST_HEAD(&sem->wait_list); +} + +static inline void __down_read(struct rw_semaphore *sem) +{ + long oldcount; +#ifndef CONFIG_SMP + oldcount = sem->count; + sem->count += RWSEM_ACTIVE_READ_BIAS; +#else + long temp; + __asm__ __volatile__( + "1: ldq_l %0,%1\n" + " addq %0,%3,%2\n" + " stq_c %2,%1\n" + " beq %2,2f\n" + " mb\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (oldcount), "=m" (sem->count), "=&r" (temp) + :"Ir" (RWSEM_ACTIVE_READ_BIAS), "m" (sem->count) : "memory"); +#endif + if (unlikely(oldcount < 0)) + rwsem_down_read_failed(sem); +} + +/* + * trylock for reading -- returns 1 if successful, 0 if contention + */ +static inline int __down_read_trylock(struct rw_semaphore *sem) +{ + long old, new, res; + + res = sem->count; + do { + new = res + RWSEM_ACTIVE_READ_BIAS; + if (new <= 0) + break; + old = res; + res = cmpxchg(&sem->count, old, new); + } while (res != old); + return res >= 0 ? 1 : 0; +} + +static inline void __down_write(struct rw_semaphore *sem) +{ + long oldcount; +#ifndef CONFIG_SMP + oldcount = sem->count; + sem->count += RWSEM_ACTIVE_WRITE_BIAS; +#else + long temp; + __asm__ __volatile__( + "1: ldq_l %0,%1\n" + " addq %0,%3,%2\n" + " stq_c %2,%1\n" + " beq %2,2f\n" + " mb\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (oldcount), "=m" (sem->count), "=&r" (temp) + :"Ir" (RWSEM_ACTIVE_WRITE_BIAS), "m" (sem->count) : "memory"); +#endif + if (unlikely(oldcount)) + rwsem_down_write_failed(sem); +} + +/* + * trylock for writing -- returns 1 if successful, 0 if contention + */ +static inline int __down_write_trylock(struct rw_semaphore *sem) +{ + long ret = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, + RWSEM_ACTIVE_WRITE_BIAS); + if (ret == RWSEM_UNLOCKED_VALUE) + return 1; + return 0; +} + +static inline void __up_read(struct rw_semaphore *sem) +{ + long oldcount; +#ifndef CONFIG_SMP + oldcount = sem->count; + sem->count -= RWSEM_ACTIVE_READ_BIAS; +#else + long temp; + __asm__ __volatile__( + " mb\n" + "1: ldq_l %0,%1\n" + " subq %0,%3,%2\n" + " stq_c %2,%1\n" + " beq %2,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (oldcount), "=m" (sem->count), "=&r" (temp) + :"Ir" (RWSEM_ACTIVE_READ_BIAS), "m" (sem->count) : "memory"); +#endif + if (unlikely(oldcount < 0)) + if ((int)oldcount - RWSEM_ACTIVE_READ_BIAS == 0) + rwsem_wake(sem); +} + +static inline void __up_write(struct rw_semaphore *sem) +{ + long count; +#ifndef CONFIG_SMP + sem->count -= RWSEM_ACTIVE_WRITE_BIAS; + count = sem->count; +#else + long temp; + __asm__ __volatile__( + " mb\n" + "1: ldq_l %0,%1\n" + " subq %0,%3,%2\n" + " stq_c %2,%1\n" + " beq %2,2f\n" + " subq %0,%3,%0\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (count), "=m" (sem->count), "=&r" (temp) + :"Ir" (RWSEM_ACTIVE_WRITE_BIAS), "m" (sem->count) : "memory"); +#endif + if (unlikely(count)) + if ((int)count == 0) + rwsem_wake(sem); +} + +/* + * downgrade write lock to read lock + */ +static inline void __downgrade_write(struct rw_semaphore *sem) +{ + long oldcount; +#ifndef CONFIG_SMP + oldcount = sem->count; + sem->count -= RWSEM_WAITING_BIAS; +#else + long temp; + __asm__ __volatile__( + "1: ldq_l %0,%1\n" + " addq %0,%3,%2\n" + " stq_c %2,%1\n" + " beq %2,2f\n" + " mb\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (oldcount), "=m" (sem->count), "=&r" (temp) + :"Ir" (-RWSEM_WAITING_BIAS), "m" (sem->count) : "memory"); +#endif + if (unlikely(oldcount < 0)) + rwsem_downgrade_wake(sem); +} + +static inline void rwsem_atomic_add(long val, struct rw_semaphore *sem) +{ +#ifndef CONFIG_SMP + sem->count += val; +#else + long temp; + __asm__ __volatile__( + "1: ldq_l %0,%1\n" + " addq %0,%2,%0\n" + " stq_c %0,%1\n" + " beq %0,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (temp), "=m" (sem->count) + :"Ir" (val), "m" (sem->count)); +#endif +} + +static inline long rwsem_atomic_update(long val, struct rw_semaphore *sem) +{ +#ifndef CONFIG_SMP + sem->count += val; + return sem->count; +#else + long ret, temp; + __asm__ __volatile__( + "1: ldq_l %0,%1\n" + " addq %0,%3,%2\n" + " addq %0,%3,%0\n" + " stq_c %2,%1\n" + " beq %2,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + :"=&r" (ret), "=m" (sem->count), "=&r" (temp) + :"Ir" (val), "m" (sem->count)); + + return ret; +#endif +} + +static inline int rwsem_is_locked(struct rw_semaphore *sem) +{ + return (sem->count != 0); +} + +#endif /* __KERNEL__ */ +#endif /* _ALPHA_RWSEM_H */ diff --git a/arch/alpha/include/asm/scatterlist.h b/arch/alpha/include/asm/scatterlist.h new file mode 100644 index 000000000000..440747ca6349 --- /dev/null +++ b/arch/alpha/include/asm/scatterlist.h @@ -0,0 +1,25 @@ +#ifndef _ALPHA_SCATTERLIST_H +#define _ALPHA_SCATTERLIST_H + +#include <asm/page.h> +#include <asm/types.h> + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + + unsigned int length; + + dma_addr_t dma_address; + __u32 dma_length; +}; + +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->dma_length) + +#define ISA_DMA_THRESHOLD (~0UL) + +#endif /* !(_ALPHA_SCATTERLIST_H) */ diff --git a/arch/alpha/include/asm/sections.h b/arch/alpha/include/asm/sections.h new file mode 100644 index 000000000000..43b40edd6e44 --- /dev/null +++ b/arch/alpha/include/asm/sections.h @@ -0,0 +1,7 @@ +#ifndef _ALPHA_SECTIONS_H +#define _ALPHA_SECTIONS_H + +/* nothing to see, move along */ +#include <asm-generic/sections.h> + +#endif diff --git a/arch/alpha/include/asm/segment.h b/arch/alpha/include/asm/segment.h new file mode 100644 index 000000000000..0453d97daae7 --- /dev/null +++ b/arch/alpha/include/asm/segment.h @@ -0,0 +1,6 @@ +#ifndef __ALPHA_SEGMENT_H +#define __ALPHA_SEGMENT_H + +/* Only here because we have some old header files that expect it.. */ + +#endif diff --git a/arch/alpha/include/asm/sembuf.h b/arch/alpha/include/asm/sembuf.h new file mode 100644 index 000000000000..7b38b1534784 --- /dev/null +++ b/arch/alpha/include/asm/sembuf.h @@ -0,0 +1,22 @@ +#ifndef _ALPHA_SEMBUF_H +#define _ALPHA_SEMBUF_H + +/* + * The semid64_ds structure for alpha architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 2 miscellaneous 64-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + __kernel_time_t sem_ctime; /* last change time */ + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ALPHA_SEMBUF_H */ diff --git a/arch/alpha/include/asm/serial.h b/arch/alpha/include/asm/serial.h new file mode 100644 index 000000000000..9d263e8d8ccc --- /dev/null +++ b/arch/alpha/include/asm/serial.h @@ -0,0 +1,29 @@ +/* + * include/asm-alpha/serial.h + */ + + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD ( 1843200 / 16 ) + +/* Standard COM flags (except for COM4, because of the 8514 problem) */ +#ifdef CONFIG_SERIAL_DETECT_IRQ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) +#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) +#else +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF +#endif + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ + { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ + { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ diff --git a/arch/alpha/include/asm/setup.h b/arch/alpha/include/asm/setup.h new file mode 100644 index 000000000000..2e023a4aa317 --- /dev/null +++ b/arch/alpha/include/asm/setup.h @@ -0,0 +1,6 @@ +#ifndef __ALPHA_SETUP_H +#define __ALPHA_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +#endif diff --git a/arch/alpha/include/asm/sfp-machine.h b/arch/alpha/include/asm/sfp-machine.h new file mode 100644 index 000000000000..5fe63afbd474 --- /dev/null +++ b/arch/alpha/include/asm/sfp-machine.h @@ -0,0 +1,82 @@ +/* Machine-dependent software floating-point definitions. + Alpha kernel version. + Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Richard Henderson (rth@cygnus.com), + Jakub Jelinek (jakub@redhat.com) and + David S. Miller (davem@redhat.com). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef _SFP_MACHINE_H +#define _SFP_MACHINE_H + +#define _FP_W_TYPE_SIZE 64 +#define _FP_W_TYPE unsigned long +#define _FP_WS_TYPE signed long +#define _FP_I_TYPE long + +#define _FP_MUL_MEAT_S(R,X,Y) \ + _FP_MUL_MEAT_1_imm(_FP_WFRACBITS_S,R,X,Y) +#define _FP_MUL_MEAT_D(R,X,Y) \ + _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_Q(R,X,Y) \ + _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) + +#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm) +#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_1_udiv(D,R,X,Y) +#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_2_udiv(Q,R,X,Y) + +#define _FP_NANFRAC_S _FP_QNANBIT_S +#define _FP_NANFRAC_D _FP_QNANBIT_D +#define _FP_NANFRAC_Q _FP_QNANBIT_Q +#define _FP_NANSIGN_S 1 +#define _FP_NANSIGN_D 1 +#define _FP_NANSIGN_Q 1 + +#define _FP_KEEPNANFRACP 1 + +/* Alpha Architecture Handbook, 4.7.10.4 sais that + * we should prefer any type of NaN in Fb, then Fa. + */ +#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ + do { \ + R##_s = Y##_s; \ + _FP_FRAC_COPY_##wc(R,X); \ + R##_c = FP_CLS_NAN; \ + } while (0) + +/* Obtain the current rounding mode. */ +#define FP_ROUNDMODE mode +#define FP_RND_NEAREST (FPCR_DYN_NORMAL >> FPCR_DYN_SHIFT) +#define FP_RND_ZERO (FPCR_DYN_CHOPPED >> FPCR_DYN_SHIFT) +#define FP_RND_PINF (FPCR_DYN_PLUS >> FPCR_DYN_SHIFT) +#define FP_RND_MINF (FPCR_DYN_MINUS >> FPCR_DYN_SHIFT) + +/* Exception flags. */ +#define FP_EX_INVALID IEEE_TRAP_ENABLE_INV +#define FP_EX_OVERFLOW IEEE_TRAP_ENABLE_OVF +#define FP_EX_UNDERFLOW IEEE_TRAP_ENABLE_UNF +#define FP_EX_DIVZERO IEEE_TRAP_ENABLE_DZE +#define FP_EX_INEXACT IEEE_TRAP_ENABLE_INE +#define FP_EX_DENORM IEEE_TRAP_ENABLE_DNO + +#define FP_DENORM_ZERO (swcr & IEEE_MAP_DMZ) + +/* We write the results always */ +#define FP_INHIBIT_RESULTS 0 + +#endif diff --git a/arch/alpha/include/asm/shmbuf.h b/arch/alpha/include/asm/shmbuf.h new file mode 100644 index 000000000000..37ee84f05085 --- /dev/null +++ b/arch/alpha/include/asm/shmbuf.h @@ -0,0 +1,38 @@ +#ifndef _ALPHA_SHMBUF_H +#define _ALPHA_SHMBUF_H + +/* + * The shmid64_ds structure for alpha architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 2 miscellaneous 64-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + __kernel_time_t shm_dtime; /* last detach time */ + __kernel_time_t shm_ctime; /* last change time */ + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused1; + unsigned long __unused2; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ALPHA_SHMBUF_H */ diff --git a/arch/alpha/include/asm/shmparam.h b/arch/alpha/include/asm/shmparam.h new file mode 100644 index 000000000000..cc901d58aebb --- /dev/null +++ b/arch/alpha/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _ASMAXP_SHMPARAM_H +#define _ASMAXP_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASMAXP_SHMPARAM_H */ diff --git a/arch/alpha/include/asm/sigcontext.h b/arch/alpha/include/asm/sigcontext.h new file mode 100644 index 000000000000..323cdb026198 --- /dev/null +++ b/arch/alpha/include/asm/sigcontext.h @@ -0,0 +1,34 @@ +#ifndef _ASMAXP_SIGCONTEXT_H +#define _ASMAXP_SIGCONTEXT_H + +struct sigcontext { + /* + * What should we have here? I'd probably better use the same + * stack layout as OSF/1, just in case we ever want to try + * running their binaries.. + * + * This is the basic layout, but I don't know if we'll ever + * actually fill in all the values.. + */ + long sc_onstack; + long sc_mask; + long sc_pc; + long sc_ps; + long sc_regs[32]; + long sc_ownedfp; + long sc_fpregs[32]; + unsigned long sc_fpcr; + unsigned long sc_fp_control; + unsigned long sc_reserved1, sc_reserved2; + unsigned long sc_ssize; + char * sc_sbase; + unsigned long sc_traparg_a0; + unsigned long sc_traparg_a1; + unsigned long sc_traparg_a2; + unsigned long sc_fp_trap_pc; + unsigned long sc_fp_trigger_sum; + unsigned long sc_fp_trigger_inst; +}; + + +#endif diff --git a/arch/alpha/include/asm/siginfo.h b/arch/alpha/include/asm/siginfo.h new file mode 100644 index 000000000000..9822362a8424 --- /dev/null +++ b/arch/alpha/include/asm/siginfo.h @@ -0,0 +1,9 @@ +#ifndef _ALPHA_SIGINFO_H +#define _ALPHA_SIGINFO_H + +#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +#define __ARCH_SI_TRAPNO + +#include <asm-generic/siginfo.h> + +#endif diff --git a/arch/alpha/include/asm/signal.h b/arch/alpha/include/asm/signal.h new file mode 100644 index 000000000000..13c2305d35ef --- /dev/null +++ b/arch/alpha/include/asm/signal.h @@ -0,0 +1,172 @@ +#ifndef _ASMAXP_SIGNAL_H +#define _ASMAXP_SIGNAL_H + +#include <linux/types.h> + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Digital Unix defines 64 signals. Most things should be clean enough + to redefine this at will, if care is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 64 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + + +/* + * Linux/AXP has different signal numbers that Linux/i386: I'm trying + * to make it OSF/1 binary compatible, at least for normal binaries. + */ +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGEMT 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGBUS 10 +#define SIGSEGV 11 +#define SIGSYS 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGURG 16 +#define SIGSTOP 17 +#define SIGTSTP 18 +#define SIGCONT 19 +#define SIGCHLD 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGIO 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGINFO 29 +#define SIGUSR1 30 +#define SIGUSR2 31 + +#define SIGPOLL SIGIO +#define SIGPWR SIGINFO +#define SIGIOT SIGABRT + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ + +#define SA_ONSTACK 0x00000001 +#define SA_RESTART 0x00000002 +#define SA_NOCLDSTOP 0x00000004 +#define SA_NODEFER 0x00000008 +#define SA_RESETHAND 0x00000010 +#define SA_NOCLDWAIT 0x00000020 +#define SA_SIGINFO 0x00000040 + +#define SA_ONESHOT SA_RESETHAND +#define SA_NOMASK SA_NODEFER + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 4096 +#define SIGSTKSZ 16384 + +#define SIG_BLOCK 1 /* for blocking signals */ +#define SIG_UNBLOCK 2 /* for unblocking signals */ +#define SIG_SETMASK 3 /* for setting the signal mask */ + +#include <asm-generic/signal.h> + +#ifdef __KERNEL__ +struct osf_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + int sa_flags; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; + __sigrestore_t ka_restorer; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + int sa_flags; +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +/* sigstack(2) is deprecated, and will be withdrawn in a future version + of the X/Open CAE Specification. Use sigaltstack instead. It is only + implemented here for OSF/1 compatibility. */ + +struct sigstack { + void __user *ss_sp; + int ss_onstack; +}; + +#ifdef __KERNEL__ +#include <asm/sigcontext.h> + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif + +#endif diff --git a/arch/alpha/include/asm/smp.h b/arch/alpha/include/asm/smp.h new file mode 100644 index 000000000000..544c69af8168 --- /dev/null +++ b/arch/alpha/include/asm/smp.h @@ -0,0 +1,62 @@ +#ifndef __ASM_SMP_H +#define __ASM_SMP_H + +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/bitops.h> +#include <asm/pal.h> + +/* HACK: Cabrio WHAMI return value is bogus if more than 8 bits used.. :-( */ + +static __inline__ unsigned char +__hard_smp_processor_id(void) +{ + register unsigned char __r0 __asm__("$0"); + __asm__ __volatile__( + "call_pal %1 #whami" + : "=r"(__r0) + :"i" (PAL_whami) + : "$1", "$22", "$23", "$24", "$25"); + return __r0; +} + +#ifdef CONFIG_SMP + +#include <asm/irq.h> + +struct cpuinfo_alpha { + unsigned long loops_per_jiffy; + unsigned long last_asn; + int need_new_asn; + int asn_lock; + unsigned long ipi_count; + unsigned long prof_multiplier; + unsigned long prof_counter; + unsigned char mcheck_expected; + unsigned char mcheck_taken; + unsigned char mcheck_extra; +} __attribute__((aligned(64))); + +extern struct cpuinfo_alpha cpu_data[NR_CPUS]; + +#define PROC_CHANGE_PENALTY 20 + +#define hard_smp_processor_id() __hard_smp_processor_id() +#define raw_smp_processor_id() (current_thread_info()->cpu) + +extern int smp_num_cpus; +#define cpu_possible_map cpu_present_map + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +#else /* CONFIG_SMP */ + +#define hard_smp_processor_id() 0 +#define smp_call_function_on_cpu(func,info,wait,cpu) ({ 0; }) + +#endif /* CONFIG_SMP */ + +#define NO_PROC_ID (-1) + +#endif diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h new file mode 100644 index 000000000000..a1057c2d95e7 --- /dev/null +++ b/arch/alpha/include/asm/socket.h @@ -0,0 +1,70 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include <asm/sockios.h> + +/* For setsockopt(2) */ +/* + * Note: we only bother about making the SOL_SOCKET options + * same as OSF/1, as that's all that "normal" programs are + * likely to set. We don't necessarily want to be binary + * compatible with _everything_. + */ +#define SOL_SOCKET 0xffff + +#define SO_DEBUG 0x0001 +#define SO_REUSEADDR 0x0004 +#define SO_KEEPALIVE 0x0008 +#define SO_DONTROUTE 0x0010 +#define SO_BROADCAST 0x0020 +#define SO_LINGER 0x0080 +#define SO_OOBINLINE 0x0100 +/* To add :#define SO_REUSEPORT 0x0200 */ + +#define SO_TYPE 0x1008 +#define SO_ERROR 0x1007 +#define SO_SNDBUF 0x1001 +#define SO_RCVBUF 0x1002 +#define SO_SNDBUFFORCE 0x100a +#define SO_RCVBUFFORCE 0x100b +#define SO_RCVLOWAT 0x1010 +#define SO_SNDLOWAT 0x1011 +#define SO_RCVTIMEO 0x1012 +#define SO_SNDTIMEO 0x1013 +#define SO_ACCEPTCONN 0x1014 + +/* linux-specific, might as well be the same as on i386 */ +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_BSDCOMPAT 14 + +#define SO_PASSCRED 17 +#define SO_PEERCRED 18 +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_PEERSEC 30 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 19 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 20 +#define SO_SECURITY_ENCRYPTION_NETWORK 21 + +#define SO_MARK 36 + +/* O_NONBLOCK clashes with the bits used for socket types. Therefore we + * have to define SOCK_NONBLOCK to a different value here. + */ +#define SOCK_NONBLOCK 0x40000000 + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/alpha/include/asm/sockios.h b/arch/alpha/include/asm/sockios.h new file mode 100644 index 000000000000..7932c7ab4a4d --- /dev/null +++ b/arch/alpha/include/asm/sockios.h @@ -0,0 +1,16 @@ +#ifndef _ASM_ALPHA_SOCKIOS_H +#define _ASM_ALPHA_SOCKIOS_H + +/* Socket-level I/O control calls. */ + +#define FIOGETOWN _IOR('f', 123, int) +#define FIOSETOWN _IOW('f', 124, int) + +#define SIOCATMARK _IOR('s', 7, int) +#define SIOCSPGRP _IOW('s', 8, pid_t) +#define SIOCGPGRP _IOR('s', 9, pid_t) + +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_ALPHA_SOCKIOS_H */ diff --git a/arch/alpha/include/asm/spinlock.h b/arch/alpha/include/asm/spinlock.h new file mode 100644 index 000000000000..aeeb125f6851 --- /dev/null +++ b/arch/alpha/include/asm/spinlock.h @@ -0,0 +1,173 @@ +#ifndef _ALPHA_SPINLOCK_H +#define _ALPHA_SPINLOCK_H + +#include <asm/system.h> +#include <linux/kernel.h> +#include <asm/current.h> + +/* + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ + +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) +#define __raw_spin_is_locked(x) ((x)->lock != 0) +#define __raw_spin_unlock_wait(x) \ + do { cpu_relax(); } while ((x)->lock) + +static inline void __raw_spin_unlock(raw_spinlock_t * lock) +{ + mb(); + lock->lock = 0; +} + +static inline void __raw_spin_lock(raw_spinlock_t * lock) +{ + long tmp; + + __asm__ __volatile__( + "1: ldl_l %0,%1\n" + " bne %0,2f\n" + " lda %0,1\n" + " stl_c %0,%1\n" + " beq %0,2f\n" + " mb\n" + ".subsection 2\n" + "2: ldl %0,%1\n" + " bne %0,2b\n" + " br 1b\n" + ".previous" + : "=&r" (tmp), "=m" (lock->lock) + : "m"(lock->lock) : "memory"); +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + return !test_and_set_bit(0, &lock->lock); +} + +/***********************************************************/ + +static inline int __raw_read_can_lock(raw_rwlock_t *lock) +{ + return (lock->lock & 1) == 0; +} + +static inline int __raw_write_can_lock(raw_rwlock_t *lock) +{ + return lock->lock == 0; +} + +static inline void __raw_read_lock(raw_rwlock_t *lock) +{ + long regx; + + __asm__ __volatile__( + "1: ldl_l %1,%0\n" + " blbs %1,6f\n" + " subl %1,2,%1\n" + " stl_c %1,%0\n" + " beq %1,6f\n" + " mb\n" + ".subsection 2\n" + "6: ldl %1,%0\n" + " blbs %1,6b\n" + " br 1b\n" + ".previous" + : "=m" (*lock), "=&r" (regx) + : "m" (*lock) : "memory"); +} + +static inline void __raw_write_lock(raw_rwlock_t *lock) +{ + long regx; + + __asm__ __volatile__( + "1: ldl_l %1,%0\n" + " bne %1,6f\n" + " lda %1,1\n" + " stl_c %1,%0\n" + " beq %1,6f\n" + " mb\n" + ".subsection 2\n" + "6: ldl %1,%0\n" + " bne %1,6b\n" + " br 1b\n" + ".previous" + : "=m" (*lock), "=&r" (regx) + : "m" (*lock) : "memory"); +} + +static inline int __raw_read_trylock(raw_rwlock_t * lock) +{ + long regx; + int success; + + __asm__ __volatile__( + "1: ldl_l %1,%0\n" + " lda %2,0\n" + " blbs %1,2f\n" + " subl %1,2,%2\n" + " stl_c %2,%0\n" + " beq %2,6f\n" + "2: mb\n" + ".subsection 2\n" + "6: br 1b\n" + ".previous" + : "=m" (*lock), "=&r" (regx), "=&r" (success) + : "m" (*lock) : "memory"); + + return success; +} + +static inline int __raw_write_trylock(raw_rwlock_t * lock) +{ + long regx; + int success; + + __asm__ __volatile__( + "1: ldl_l %1,%0\n" + " lda %2,0\n" + " bne %1,2f\n" + " lda %2,1\n" + " stl_c %2,%0\n" + " beq %2,6f\n" + "2: mb\n" + ".subsection 2\n" + "6: br 1b\n" + ".previous" + : "=m" (*lock), "=&r" (regx), "=&r" (success) + : "m" (*lock) : "memory"); + + return success; +} + +static inline void __raw_read_unlock(raw_rwlock_t * lock) +{ + long regx; + __asm__ __volatile__( + " mb\n" + "1: ldl_l %1,%0\n" + " addl %1,2,%1\n" + " stl_c %1,%0\n" + " beq %1,6f\n" + ".subsection 2\n" + "6: br 1b\n" + ".previous" + : "=m" (*lock), "=&r" (regx) + : "m" (*lock) : "memory"); +} + +static inline void __raw_write_unlock(raw_rwlock_t * lock) +{ + mb(); + lock->lock = 0; +} + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* _ALPHA_SPINLOCK_H */ diff --git a/arch/alpha/include/asm/spinlock_types.h b/arch/alpha/include/asm/spinlock_types.h new file mode 100644 index 000000000000..8141eb5ebf0d --- /dev/null +++ b/arch/alpha/include/asm/spinlock_types.h @@ -0,0 +1,20 @@ +#ifndef _ALPHA_SPINLOCK_TYPES_H +#define _ALPHA_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned int lock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + volatile unsigned int lock; +} raw_rwlock_t; + +#define __RAW_RW_LOCK_UNLOCKED { 0 } + +#endif diff --git a/arch/alpha/include/asm/stat.h b/arch/alpha/include/asm/stat.h new file mode 100644 index 000000000000..07ad3e6b3f3e --- /dev/null +++ b/arch/alpha/include/asm/stat.h @@ -0,0 +1,48 @@ +#ifndef _ALPHA_STAT_H +#define _ALPHA_STAT_H + +struct stat { + unsigned int st_dev; + unsigned int st_ino; + unsigned int st_mode; + unsigned int st_nlink; + unsigned int st_uid; + unsigned int st_gid; + unsigned int st_rdev; + long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; + unsigned int st_blksize; + unsigned int st_blocks; + unsigned int st_flags; + unsigned int st_gen; +}; + +/* The stat64 structure increases the size of dev_t, blkcnt_t, adds + nanosecond resolution times, and padding for expansion. */ + +struct stat64 { + unsigned long st_dev; + unsigned long st_ino; + unsigned long st_rdev; + long st_size; + unsigned long st_blocks; + + unsigned int st_mode; + unsigned int st_uid; + unsigned int st_gid; + unsigned int st_blksize; + unsigned int st_nlink; + unsigned int __pad0; + + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + long __unused[3]; +}; + +#endif diff --git a/arch/alpha/include/asm/statfs.h b/arch/alpha/include/asm/statfs.h new file mode 100644 index 000000000000..ad15830baefe --- /dev/null +++ b/arch/alpha/include/asm/statfs.h @@ -0,0 +1,6 @@ +#ifndef _ALPHA_STATFS_H +#define _ALPHA_STATFS_H + +#include <asm-generic/statfs.h> + +#endif diff --git a/arch/alpha/include/asm/string.h b/arch/alpha/include/asm/string.h new file mode 100644 index 000000000000..b02b8a282940 --- /dev/null +++ b/arch/alpha/include/asm/string.h @@ -0,0 +1,66 @@ +#ifndef __ALPHA_STRING_H__ +#define __ALPHA_STRING_H__ + +#ifdef __KERNEL__ + +/* + * GCC of any recent vintage doesn't do stupid things with bcopy. + * EGCS 1.1 knows all about expanding memcpy inline, others don't. + * + * Similarly for a memset with data = 0. + */ + +#define __HAVE_ARCH_MEMCPY +extern void * memcpy(void *, const void *, size_t); +#define __HAVE_ARCH_MEMMOVE +extern void * memmove(void *, const void *, size_t); + +/* For backward compatibility with modules. Unused otherwise. */ +extern void * __memcpy(void *, const void *, size_t); + +#define memcpy __builtin_memcpy + +#define __HAVE_ARCH_MEMSET +extern void * __constant_c_memset(void *, unsigned long, size_t); +extern void * __memset(void *, int, size_t); +extern void * memset(void *, int, size_t); + +#define memset(s, c, n) \ +(__builtin_constant_p(c) \ + ? (__builtin_constant_p(n) && (c) == 0 \ + ? __builtin_memset((s),0,(n)) \ + : __constant_c_memset((s),0x0101010101010101UL*(unsigned char)(c),(n))) \ + : __memset((s),(c),(n))) + +#define __HAVE_ARCH_STRCPY +extern char * strcpy(char *,const char *); +#define __HAVE_ARCH_STRNCPY +extern char * strncpy(char *, const char *, size_t); +#define __HAVE_ARCH_STRCAT +extern char * strcat(char *, const char *); +#define __HAVE_ARCH_STRNCAT +extern char * strncat(char *, const char *, size_t); +#define __HAVE_ARCH_STRCHR +extern char * strchr(const char *,int); +#define __HAVE_ARCH_STRRCHR +extern char * strrchr(const char *,int); +#define __HAVE_ARCH_STRLEN +extern size_t strlen(const char *); +#define __HAVE_ARCH_MEMCHR +extern void * memchr(const void *, int, size_t); + +/* The following routine is like memset except that it writes 16-bit + aligned values. The DEST and COUNT parameters must be even for + correct operation. */ + +#define __HAVE_ARCH_MEMSETW +extern void * __memsetw(void *dest, unsigned short, size_t count); + +#define memsetw(s, c, n) \ +(__builtin_constant_p(c) \ + ? __constant_c_memset((s),0x0001000100010001UL*(unsigned short)(c),(n)) \ + : __memsetw((s),(c),(n))) + +#endif /* __KERNEL__ */ + +#endif /* __ALPHA_STRING_H__ */ diff --git a/arch/alpha/include/asm/suspend.h b/arch/alpha/include/asm/suspend.h new file mode 100644 index 000000000000..c7042d575851 --- /dev/null +++ b/arch/alpha/include/asm/suspend.h @@ -0,0 +1,6 @@ +#ifndef __ALPHA_SUSPEND_H +#define __ALPHA_SUSPEND_H + +/* Dummy include. */ + +#endif /* __ALPHA_SUSPEND_H */ diff --git a/arch/alpha/include/asm/sysinfo.h b/arch/alpha/include/asm/sysinfo.h new file mode 100644 index 000000000000..086aba284df2 --- /dev/null +++ b/arch/alpha/include/asm/sysinfo.h @@ -0,0 +1,39 @@ +/* + * include/asm-alpha/sysinfo.h + */ + +#ifndef __ASM_ALPHA_SYSINFO_H +#define __ASM_ALPHA_SYSINFO_H + +/* This defines the subset of the OSF/1 getsysinfo/setsysinfo calls + that we support. */ + +#define GSI_UACPROC 8 +#define GSI_IEEE_FP_CONTROL 45 +#define GSI_IEEE_STATE_AT_SIGNAL 46 +#define GSI_PROC_TYPE 60 +#define GSI_GET_HWRPB 101 + +#define SSI_NVPAIRS 1 +#define SSI_IEEE_FP_CONTROL 14 +#define SSI_IEEE_STATE_AT_SIGNAL 15 +#define SSI_IEEE_IGNORE_STATE_AT_SIGNAL 16 +#define SSI_IEEE_RAISE_EXCEPTION 1001 /* linux specific */ + +#define SSIN_UACPROC 6 + +#define UAC_BITMASK 7 +#define UAC_NOPRINT 1 +#define UAC_NOFIX 2 +#define UAC_SIGBUS 4 + + +#ifdef __KERNEL__ + +/* This is the shift that is applied to the UAC bits as stored in the + per-thread flags. See thread_info.h. */ +#define UAC_SHIFT 6 + +#endif + +#endif /* __ASM_ALPHA_SYSINFO_H */ diff --git a/arch/alpha/include/asm/system.h b/arch/alpha/include/asm/system.h new file mode 100644 index 000000000000..afe20fa58c99 --- /dev/null +++ b/arch/alpha/include/asm/system.h @@ -0,0 +1,829 @@ +#ifndef __ALPHA_SYSTEM_H +#define __ALPHA_SYSTEM_H + +#include <asm/pal.h> +#include <asm/page.h> +#include <asm/barrier.h> + +/* + * System defines.. Note that this is included both from .c and .S + * files, so it does only defines, not any C code. + */ + +/* + * We leave one page for the initial stack page, and one page for + * the initial process structure. Also, the console eats 3 MB for + * the initial bootloader (one of which we can reclaim later). + */ +#define BOOT_PCB 0x20000000 +#define BOOT_ADDR 0x20000000 +/* Remove when official MILO sources have ELF support: */ +#define BOOT_SIZE (16*1024) + +#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS +#define KERNEL_START_PHYS 0x300000 /* Old bootloaders hardcoded this. */ +#else +#define KERNEL_START_PHYS 0x1000000 /* required: Wildfire/Titan/Marvel */ +#endif + +#define KERNEL_START (PAGE_OFFSET+KERNEL_START_PHYS) +#define SWAPPER_PGD KERNEL_START +#define INIT_STACK (PAGE_OFFSET+KERNEL_START_PHYS+0x02000) +#define EMPTY_PGT (PAGE_OFFSET+KERNEL_START_PHYS+0x04000) +#define EMPTY_PGE (PAGE_OFFSET+KERNEL_START_PHYS+0x08000) +#define ZERO_PGE (PAGE_OFFSET+KERNEL_START_PHYS+0x0A000) + +#define START_ADDR (PAGE_OFFSET+KERNEL_START_PHYS+0x10000) + +/* + * This is setup by the secondary bootstrap loader. Because + * the zero page is zeroed out as soon as the vm system is + * initialized, we need to copy things out into a more permanent + * place. + */ +#define PARAM ZERO_PGE +#define COMMAND_LINE ((char*)(PARAM + 0x0000)) +#define INITRD_START (*(unsigned long *) (PARAM+0x100)) +#define INITRD_SIZE (*(unsigned long *) (PARAM+0x108)) + +#ifndef __ASSEMBLY__ +#include <linux/kernel.h> +#define AT_VECTOR_SIZE_ARCH 4 /* entries in ARCH_DLINFO */ + +/* + * This is the logout header that should be common to all platforms + * (assuming they are running OSF/1 PALcode, I guess). + */ +struct el_common { + unsigned int size; /* size in bytes of logout area */ + unsigned int sbz1 : 30; /* should be zero */ + unsigned int err2 : 1; /* second error */ + unsigned int retry : 1; /* retry flag */ + unsigned int proc_offset; /* processor-specific offset */ + unsigned int sys_offset; /* system-specific offset */ + unsigned int code; /* machine check code */ + unsigned int frame_rev; /* frame revision */ +}; + +/* Machine Check Frame for uncorrectable errors (Large format) + * --- This is used to log uncorrectable errors such as + * double bit ECC errors. + * --- These errors are detected by both processor and systems. + */ +struct el_common_EV5_uncorrectable_mcheck { + unsigned long shadow[8]; /* Shadow reg. 8-14, 25 */ + unsigned long paltemp[24]; /* PAL TEMP REGS. */ + unsigned long exc_addr; /* Address of excepting instruction*/ + unsigned long exc_sum; /* Summary of arithmetic traps. */ + unsigned long exc_mask; /* Exception mask (from exc_sum). */ + unsigned long pal_base; /* Base address for PALcode. */ + unsigned long isr; /* Interrupt Status Reg. */ + unsigned long icsr; /* CURRENT SETUP OF EV5 IBOX */ + unsigned long ic_perr_stat; /* I-CACHE Reg. <11> set Data parity + <12> set TAG parity*/ + unsigned long dc_perr_stat; /* D-CACHE error Reg. Bits set to 1: + <2> Data error in bank 0 + <3> Data error in bank 1 + <4> Tag error in bank 0 + <5> Tag error in bank 1 */ + unsigned long va; /* Effective VA of fault or miss. */ + unsigned long mm_stat; /* Holds the reason for D-stream + fault or D-cache parity errors */ + unsigned long sc_addr; /* Address that was being accessed + when EV5 detected Secondary cache + failure. */ + unsigned long sc_stat; /* Helps determine if the error was + TAG/Data parity(Secondary Cache)*/ + unsigned long bc_tag_addr; /* Contents of EV5 BC_TAG_ADDR */ + unsigned long ei_addr; /* Physical address of any transfer + that is logged in EV5 EI_STAT */ + unsigned long fill_syndrome; /* For correcting ECC errors. */ + unsigned long ei_stat; /* Helps identify reason of any + processor uncorrectable error + at its external interface. */ + unsigned long ld_lock; /* Contents of EV5 LD_LOCK register*/ +}; + +struct el_common_EV6_mcheck { + unsigned int FrameSize; /* Bytes, including this field */ + unsigned int FrameFlags; /* <31> = Retry, <30> = Second Error */ + unsigned int CpuOffset; /* Offset to CPU-specific info */ + unsigned int SystemOffset; /* Offset to system-specific info */ + unsigned int MCHK_Code; + unsigned int MCHK_Frame_Rev; + unsigned long I_STAT; /* EV6 Internal Processor Registers */ + unsigned long DC_STAT; /* (See the 21264 Spec) */ + unsigned long C_ADDR; + unsigned long DC1_SYNDROME; + unsigned long DC0_SYNDROME; + unsigned long C_STAT; + unsigned long C_STS; + unsigned long MM_STAT; + unsigned long EXC_ADDR; + unsigned long IER_CM; + unsigned long ISUM; + unsigned long RESERVED0; + unsigned long PAL_BASE; + unsigned long I_CTL; + unsigned long PCTX; +}; + +extern void halt(void) __attribute__((noreturn)); +#define __halt() __asm__ __volatile__ ("call_pal %0 #halt" : : "i" (PAL_halt)) + +#define switch_to(P,N,L) \ + do { \ + (L) = alpha_switch_to(virt_to_phys(&task_thread_info(N)->pcb), (P)); \ + check_mmu_context(); \ + } while (0) + +struct task_struct; +extern struct task_struct *alpha_switch_to(unsigned long, struct task_struct*); + +#define imb() \ +__asm__ __volatile__ ("call_pal %0 #imb" : : "i" (PAL_imb) : "memory") + +#define draina() \ +__asm__ __volatile__ ("call_pal %0 #draina" : : "i" (PAL_draina) : "memory") + +enum implver_enum { + IMPLVER_EV4, + IMPLVER_EV5, + IMPLVER_EV6 +}; + +#ifdef CONFIG_ALPHA_GENERIC +#define implver() \ +({ unsigned long __implver; \ + __asm__ ("implver %0" : "=r"(__implver)); \ + (enum implver_enum) __implver; }) +#else +/* Try to eliminate some dead code. */ +#ifdef CONFIG_ALPHA_EV4 +#define implver() IMPLVER_EV4 +#endif +#ifdef CONFIG_ALPHA_EV5 +#define implver() IMPLVER_EV5 +#endif +#if defined(CONFIG_ALPHA_EV6) +#define implver() IMPLVER_EV6 +#endif +#endif + +enum amask_enum { + AMASK_BWX = (1UL << 0), + AMASK_FIX = (1UL << 1), + AMASK_CIX = (1UL << 2), + AMASK_MAX = (1UL << 8), + AMASK_PRECISE_TRAP = (1UL << 9), +}; + +#define amask(mask) \ +({ unsigned long __amask, __input = (mask); \ + __asm__ ("amask %1,%0" : "=r"(__amask) : "rI"(__input)); \ + __amask; }) + +#define __CALL_PAL_R0(NAME, TYPE) \ +extern inline TYPE NAME(void) \ +{ \ + register TYPE __r0 __asm__("$0"); \ + __asm__ __volatile__( \ + "call_pal %1 # " #NAME \ + :"=r" (__r0) \ + :"i" (PAL_ ## NAME) \ + :"$1", "$16", "$22", "$23", "$24", "$25"); \ + return __r0; \ +} + +#define __CALL_PAL_W1(NAME, TYPE0) \ +extern inline void NAME(TYPE0 arg0) \ +{ \ + register TYPE0 __r16 __asm__("$16") = arg0; \ + __asm__ __volatile__( \ + "call_pal %1 # "#NAME \ + : "=r"(__r16) \ + : "i"(PAL_ ## NAME), "0"(__r16) \ + : "$1", "$22", "$23", "$24", "$25"); \ +} + +#define __CALL_PAL_W2(NAME, TYPE0, TYPE1) \ +extern inline void NAME(TYPE0 arg0, TYPE1 arg1) \ +{ \ + register TYPE0 __r16 __asm__("$16") = arg0; \ + register TYPE1 __r17 __asm__("$17") = arg1; \ + __asm__ __volatile__( \ + "call_pal %2 # "#NAME \ + : "=r"(__r16), "=r"(__r17) \ + : "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17) \ + : "$1", "$22", "$23", "$24", "$25"); \ +} + +#define __CALL_PAL_RW1(NAME, RTYPE, TYPE0) \ +extern inline RTYPE NAME(TYPE0 arg0) \ +{ \ + register RTYPE __r0 __asm__("$0"); \ + register TYPE0 __r16 __asm__("$16") = arg0; \ + __asm__ __volatile__( \ + "call_pal %2 # "#NAME \ + : "=r"(__r16), "=r"(__r0) \ + : "i"(PAL_ ## NAME), "0"(__r16) \ + : "$1", "$22", "$23", "$24", "$25"); \ + return __r0; \ +} + +#define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1) \ +extern inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \ +{ \ + register RTYPE __r0 __asm__("$0"); \ + register TYPE0 __r16 __asm__("$16") = arg0; \ + register TYPE1 __r17 __asm__("$17") = arg1; \ + __asm__ __volatile__( \ + "call_pal %3 # "#NAME \ + : "=r"(__r16), "=r"(__r17), "=r"(__r0) \ + : "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17) \ + : "$1", "$22", "$23", "$24", "$25"); \ + return __r0; \ +} + +__CALL_PAL_W1(cflush, unsigned long); +__CALL_PAL_R0(rdmces, unsigned long); +__CALL_PAL_R0(rdps, unsigned long); +__CALL_PAL_R0(rdusp, unsigned long); +__CALL_PAL_RW1(swpipl, unsigned long, unsigned long); +__CALL_PAL_R0(whami, unsigned long); +__CALL_PAL_W2(wrent, void*, unsigned long); +__CALL_PAL_W1(wripir, unsigned long); +__CALL_PAL_W1(wrkgp, unsigned long); +__CALL_PAL_W1(wrmces, unsigned long); +__CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long); +__CALL_PAL_W1(wrusp, unsigned long); +__CALL_PAL_W1(wrvptptr, unsigned long); + +#define IPL_MIN 0 +#define IPL_SW0 1 +#define IPL_SW1 2 +#define IPL_DEV0 3 +#define IPL_DEV1 4 +#define IPL_TIMER 5 +#define IPL_PERF 6 +#define IPL_POWERFAIL 6 +#define IPL_MCHECK 7 +#define IPL_MAX 7 + +#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK +#undef IPL_MIN +#define IPL_MIN __min_ipl +extern int __min_ipl; +#endif + +#define getipl() (rdps() & 7) +#define setipl(ipl) ((void) swpipl(ipl)) + +#define local_irq_disable() do { setipl(IPL_MAX); barrier(); } while(0) +#define local_irq_enable() do { barrier(); setipl(IPL_MIN); } while(0) +#define local_save_flags(flags) ((flags) = rdps()) +#define local_irq_save(flags) do { (flags) = swpipl(IPL_MAX); barrier(); } while(0) +#define local_irq_restore(flags) do { barrier(); setipl(flags); barrier(); } while(0) + +#define irqs_disabled() (getipl() == IPL_MAX) + +/* + * TB routines.. + */ +#define __tbi(nr,arg,arg1...) \ +({ \ + register unsigned long __r16 __asm__("$16") = (nr); \ + register unsigned long __r17 __asm__("$17"); arg; \ + __asm__ __volatile__( \ + "call_pal %3 #__tbi" \ + :"=r" (__r16),"=r" (__r17) \ + :"0" (__r16),"i" (PAL_tbi) ,##arg1 \ + :"$0", "$1", "$22", "$23", "$24", "$25"); \ +}) + +#define tbi(x,y) __tbi(x,__r17=(y),"1" (__r17)) +#define tbisi(x) __tbi(1,__r17=(x),"1" (__r17)) +#define tbisd(x) __tbi(2,__r17=(x),"1" (__r17)) +#define tbis(x) __tbi(3,__r17=(x),"1" (__r17)) +#define tbiap() __tbi(-1, /* no second argument */) +#define tbia() __tbi(-2, /* no second argument */) + +/* + * Atomic exchange. + * Since it can be used to implement critical sections + * it must clobber "memory" (also for interrupts in UP). + */ + +static inline unsigned long +__xchg_u8(volatile char *m, unsigned long val) +{ + unsigned long ret, tmp, addr64; + + __asm__ __volatile__( + " andnot %4,7,%3\n" + " insbl %1,%4,%1\n" + "1: ldq_l %2,0(%3)\n" + " extbl %2,%4,%0\n" + " mskbl %2,%4,%2\n" + " or %1,%2,%2\n" + " stq_c %2,0(%3)\n" + " beq %2,2f\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + ".subsection 2\n" + "2: br 1b\n" + ".previous" + : "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64) + : "r" ((long)m), "1" (val) : "memory"); + + return ret; +} + +static inline unsigned long +__xchg_u16(volatile short *m, unsigned long val) +{ + unsigned long ret, tmp, addr64; + + __asm__ __volatile__( + " andnot %4,7,%3\n" + " inswl %1,%4,%1\n" + "1: ldq_l %2,0(%3)\n" + " extwl %2,%4,%0\n" + " mskwl %2,%4,%2\n" + " or %1,%2,%2\n" + " stq_c %2,0(%3)\n" + " beq %2,2f\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + ".subsection 2\n" + "2: br 1b\n" + ".previous" + : "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64) + : "r" ((long)m), "1" (val) : "memory"); + + return ret; +} + +static inline unsigned long +__xchg_u32(volatile int *m, unsigned long val) +{ + unsigned long dummy; + + __asm__ __volatile__( + "1: ldl_l %0,%4\n" + " bis $31,%3,%1\n" + " stl_c %1,%2\n" + " beq %1,2f\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + ".subsection 2\n" + "2: br 1b\n" + ".previous" + : "=&r" (val), "=&r" (dummy), "=m" (*m) + : "rI" (val), "m" (*m) : "memory"); + + return val; +} + +static inline unsigned long +__xchg_u64(volatile long *m, unsigned long val) +{ + unsigned long dummy; + + __asm__ __volatile__( + "1: ldq_l %0,%4\n" + " bis $31,%3,%1\n" + " stq_c %1,%2\n" + " beq %1,2f\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + ".subsection 2\n" + "2: br 1b\n" + ".previous" + : "=&r" (val), "=&r" (dummy), "=m" (*m) + : "rI" (val), "m" (*m) : "memory"); + + return val; +} + +/* This function doesn't exist, so you'll get a linker error + if something tries to do an invalid xchg(). */ +extern void __xchg_called_with_bad_pointer(void); + +#define __xchg(ptr, x, size) \ +({ \ + unsigned long __xchg__res; \ + volatile void *__xchg__ptr = (ptr); \ + switch (size) { \ + case 1: __xchg__res = __xchg_u8(__xchg__ptr, x); break; \ + case 2: __xchg__res = __xchg_u16(__xchg__ptr, x); break; \ + case 4: __xchg__res = __xchg_u32(__xchg__ptr, x); break; \ + case 8: __xchg__res = __xchg_u64(__xchg__ptr, x); break; \ + default: __xchg_called_with_bad_pointer(); __xchg__res = x; \ + } \ + __xchg__res; \ +}) + +#define xchg(ptr,x) \ + ({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \ + }) + +static inline unsigned long +__xchg_u8_local(volatile char *m, unsigned long val) +{ + unsigned long ret, tmp, addr64; + + __asm__ __volatile__( + " andnot %4,7,%3\n" + " insbl %1,%4,%1\n" + "1: ldq_l %2,0(%3)\n" + " extbl %2,%4,%0\n" + " mskbl %2,%4,%2\n" + " or %1,%2,%2\n" + " stq_c %2,0(%3)\n" + " beq %2,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + : "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64) + : "r" ((long)m), "1" (val) : "memory"); + + return ret; +} + +static inline unsigned long +__xchg_u16_local(volatile short *m, unsigned long val) +{ + unsigned long ret, tmp, addr64; + + __asm__ __volatile__( + " andnot %4,7,%3\n" + " inswl %1,%4,%1\n" + "1: ldq_l %2,0(%3)\n" + " extwl %2,%4,%0\n" + " mskwl %2,%4,%2\n" + " or %1,%2,%2\n" + " stq_c %2,0(%3)\n" + " beq %2,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + : "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64) + : "r" ((long)m), "1" (val) : "memory"); + + return ret; +} + +static inline unsigned long +__xchg_u32_local(volatile int *m, unsigned long val) +{ + unsigned long dummy; + + __asm__ __volatile__( + "1: ldl_l %0,%4\n" + " bis $31,%3,%1\n" + " stl_c %1,%2\n" + " beq %1,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + : "=&r" (val), "=&r" (dummy), "=m" (*m) + : "rI" (val), "m" (*m) : "memory"); + + return val; +} + +static inline unsigned long +__xchg_u64_local(volatile long *m, unsigned long val) +{ + unsigned long dummy; + + __asm__ __volatile__( + "1: ldq_l %0,%4\n" + " bis $31,%3,%1\n" + " stq_c %1,%2\n" + " beq %1,2f\n" + ".subsection 2\n" + "2: br 1b\n" + ".previous" + : "=&r" (val), "=&r" (dummy), "=m" (*m) + : "rI" (val), "m" (*m) : "memory"); + + return val; +} + +#define __xchg_local(ptr, x, size) \ +({ \ + unsigned long __xchg__res; \ + volatile void *__xchg__ptr = (ptr); \ + switch (size) { \ + case 1: __xchg__res = __xchg_u8_local(__xchg__ptr, x); break; \ + case 2: __xchg__res = __xchg_u16_local(__xchg__ptr, x); break; \ + case 4: __xchg__res = __xchg_u32_local(__xchg__ptr, x); break; \ + case 8: __xchg__res = __xchg_u64_local(__xchg__ptr, x); break; \ + default: __xchg_called_with_bad_pointer(); __xchg__res = x; \ + } \ + __xchg__res; \ +}) + +#define xchg_local(ptr,x) \ + ({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \ + sizeof(*(ptr))); \ + }) + +/* + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. + * + * The memory barrier should be placed in SMP only when we actually + * make the change. If we don't change anything (so if the returned + * prev is equal to old) then we aren't acquiring anything new and + * we don't need any memory barrier as far I can tell. + */ + +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long +__cmpxchg_u8(volatile char *m, long old, long new) +{ + unsigned long prev, tmp, cmp, addr64; + + __asm__ __volatile__( + " andnot %5,7,%4\n" + " insbl %1,%5,%1\n" + "1: ldq_l %2,0(%4)\n" + " extbl %2,%5,%0\n" + " cmpeq %0,%6,%3\n" + " beq %3,2f\n" + " mskbl %2,%5,%2\n" + " or %1,%2,%2\n" + " stq_c %2,0(%4)\n" + " beq %2,3f\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + "2:\n" + ".subsection 2\n" + "3: br 1b\n" + ".previous" + : "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64) + : "r" ((long)m), "Ir" (old), "1" (new) : "memory"); + + return prev; +} + +static inline unsigned long +__cmpxchg_u16(volatile short *m, long old, long new) +{ + unsigned long prev, tmp, cmp, addr64; + + __asm__ __volatile__( + " andnot %5,7,%4\n" + " inswl %1,%5,%1\n" + "1: ldq_l %2,0(%4)\n" + " extwl %2,%5,%0\n" + " cmpeq %0,%6,%3\n" + " beq %3,2f\n" + " mskwl %2,%5,%2\n" + " or %1,%2,%2\n" + " stq_c %2,0(%4)\n" + " beq %2,3f\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + "2:\n" + ".subsection 2\n" + "3: br 1b\n" + ".previous" + : "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64) + : "r" ((long)m), "Ir" (old), "1" (new) : "memory"); + + return prev; +} + +static inline unsigned long +__cmpxchg_u32(volatile int *m, int old, int new) +{ + unsigned long prev, cmp; + + __asm__ __volatile__( + "1: ldl_l %0,%5\n" + " cmpeq %0,%3,%1\n" + " beq %1,2f\n" + " mov %4,%1\n" + " stl_c %1,%2\n" + " beq %1,3f\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + "2:\n" + ".subsection 2\n" + "3: br 1b\n" + ".previous" + : "=&r"(prev), "=&r"(cmp), "=m"(*m) + : "r"((long) old), "r"(new), "m"(*m) : "memory"); + + return prev; +} + +static inline unsigned long +__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new) +{ + unsigned long prev, cmp; + + __asm__ __volatile__( + "1: ldq_l %0,%5\n" + " cmpeq %0,%3,%1\n" + " beq %1,2f\n" + " mov %4,%1\n" + " stq_c %1,%2\n" + " beq %1,3f\n" +#ifdef CONFIG_SMP + " mb\n" +#endif + "2:\n" + ".subsection 2\n" + "3: br 1b\n" + ".previous" + : "=&r"(prev), "=&r"(cmp), "=m"(*m) + : "r"((long) old), "r"(new), "m"(*m) : "memory"); + + return prev; +} + +/* This function doesn't exist, so you'll get a linker error + if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +static __always_inline unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) +{ + switch (size) { + case 1: + return __cmpxchg_u8(ptr, old, new); + case 2: + return __cmpxchg_u16(ptr, old, new); + case 4: + return __cmpxchg_u32(ptr, old, new); + case 8: + return __cmpxchg_u64(ptr, old, new); + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr, o, n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) +#define cmpxchg64(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg((ptr), (o), (n)); \ + }) + +static inline unsigned long +__cmpxchg_u8_local(volatile char *m, long old, long new) +{ + unsigned long prev, tmp, cmp, addr64; + + __asm__ __volatile__( + " andnot %5,7,%4\n" + " insbl %1,%5,%1\n" + "1: ldq_l %2,0(%4)\n" + " extbl %2,%5,%0\n" + " cmpeq %0,%6,%3\n" + " beq %3,2f\n" + " mskbl %2,%5,%2\n" + " or %1,%2,%2\n" + " stq_c %2,0(%4)\n" + " beq %2,3f\n" + "2:\n" + ".subsection 2\n" + "3: br 1b\n" + ".previous" + : "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64) + : "r" ((long)m), "Ir" (old), "1" (new) : "memory"); + + return prev; +} + +static inline unsigned long +__cmpxchg_u16_local(volatile short *m, long old, long new) +{ + unsigned long prev, tmp, cmp, addr64; + + __asm__ __volatile__( + " andnot %5,7,%4\n" + " inswl %1,%5,%1\n" + "1: ldq_l %2,0(%4)\n" + " extwl %2,%5,%0\n" + " cmpeq %0,%6,%3\n" + " beq %3,2f\n" + " mskwl %2,%5,%2\n" + " or %1,%2,%2\n" + " stq_c %2,0(%4)\n" + " beq %2,3f\n" + "2:\n" + ".subsection 2\n" + "3: br 1b\n" + ".previous" + : "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64) + : "r" ((long)m), "Ir" (old), "1" (new) : "memory"); + + return prev; +} + +static inline unsigned long +__cmpxchg_u32_local(volatile int *m, int old, int new) +{ + unsigned long prev, cmp; + + __asm__ __volatile__( + "1: ldl_l %0,%5\n" + " cmpeq %0,%3,%1\n" + " beq %1,2f\n" + " mov %4,%1\n" + " stl_c %1,%2\n" + " beq %1,3f\n" + "2:\n" + ".subsection 2\n" + "3: br 1b\n" + ".previous" + : "=&r"(prev), "=&r"(cmp), "=m"(*m) + : "r"((long) old), "r"(new), "m"(*m) : "memory"); + + return prev; +} + +static inline unsigned long +__cmpxchg_u64_local(volatile long *m, unsigned long old, unsigned long new) +{ + unsigned long prev, cmp; + + __asm__ __volatile__( + "1: ldq_l %0,%5\n" + " cmpeq %0,%3,%1\n" + " beq %1,2f\n" + " mov %4,%1\n" + " stq_c %1,%2\n" + " beq %1,3f\n" + "2:\n" + ".subsection 2\n" + "3: br 1b\n" + ".previous" + : "=&r"(prev), "=&r"(cmp), "=m"(*m) + : "r"((long) old), "r"(new), "m"(*m) : "memory"); + + return prev; +} + +static __always_inline unsigned long +__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new, + int size) +{ + switch (size) { + case 1: + return __cmpxchg_u8_local(ptr, old, new); + case 2: + return __cmpxchg_u16_local(ptr, old, new); + case 4: + return __cmpxchg_u32_local(ptr, old, new); + case 8: + return __cmpxchg_u64_local(ptr, old, new); + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg_local(ptr, o, n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) +#define cmpxchg64_local(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_local((ptr), (o), (n)); \ + }) + + +#endif /* __ASSEMBLY__ */ + +#define arch_align_stack(x) (x) + +#endif diff --git a/arch/alpha/include/asm/termbits.h b/arch/alpha/include/asm/termbits.h new file mode 100644 index 000000000000..ad854a4a3af6 --- /dev/null +++ b/arch/alpha/include/asm/termbits.h @@ -0,0 +1,200 @@ +#ifndef _ALPHA_TERMBITS_H +#define _ALPHA_TERMBITS_H + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +/* + * termios type and macro definitions. Be careful about adding stuff + * to this file since it's used in GNU libc and there are strict rules + * concerning namespace pollution. + */ + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t c_line; /* line discipline (== c_cc[19]) */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* Alpha has matching termios and ktermios */ + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t c_line; /* line discipline (== c_cc[19]) */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VEOF 0 +#define VEOL 1 +#define VEOL2 2 +#define VERASE 3 +#define VWERASE 4 +#define VKILL 5 +#define VREPRINT 6 +#define VSWTC 7 +#define VINTR 8 +#define VQUIT 9 +#define VSUSP 10 +#define VSTART 12 +#define VSTOP 13 +#define VLNEXT 14 +#define VDISCARD 15 +#define VMIN 16 +#define VTIME 17 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IXON 0001000 +#define IXOFF 0002000 +#define IXANY 0004000 +#define IUCLC 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define ONLCR 0000002 +#define OLCUC 0000004 + +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 + +#define OFILL 00000100 +#define OFDEL 00000200 +#define NLDLY 00001400 +#define NL0 00000000 +#define NL1 00000400 +#define NL2 00001000 +#define NL3 00001400 +#define TABDLY 00006000 +#define TAB0 00000000 +#define TAB1 00002000 +#define TAB2 00004000 +#define TAB3 00006000 +#define CRDLY 00030000 +#define CR0 00000000 +#define CR1 00010000 +#define CR2 00020000 +#define CR3 00030000 +#define FFDLY 00040000 +#define FF0 00000000 +#define FF1 00040000 +#define BSDLY 00100000 +#define BS0 00000000 +#define BS1 00100000 +#define VTDLY 00200000 +#define VT0 00000000 +#define VT1 00200000 +#define XTABS 01000000 /* Hmm.. Linux/i386 considers this part of TABDLY.. */ + +/* c_cflag bit meaning */ +#define CBAUD 0000037 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CBAUDEX 0000000 +#define B57600 00020 +#define B115200 00021 +#define B230400 00022 +#define B460800 00023 +#define B500000 00024 +#define B576000 00025 +#define B921600 00026 +#define B1000000 00027 +#define B1152000 00030 +#define B1500000 00031 +#define B2000000 00032 +#define B2500000 00033 +#define B3000000 00034 +#define B3500000 00035 +#define B4000000 00036 + +#define CSIZE 00001400 +#define CS5 00000000 +#define CS6 00000400 +#define CS7 00001000 +#define CS8 00001400 + +#define CSTOPB 00002000 +#define CREAD 00004000 +#define PARENB 00010000 +#define PARODD 00020000 +#define HUPCL 00040000 + +#define CLOCAL 00100000 +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +/* c_lflag bits */ +#define ISIG 0x00000080 +#define ICANON 0x00000100 +#define XCASE 0x00004000 +#define ECHO 0x00000008 +#define ECHOE 0x00000002 +#define ECHOK 0x00000004 +#define ECHONL 0x00000010 +#define NOFLSH 0x80000000 +#define TOSTOP 0x00400000 +#define ECHOCTL 0x00000040 +#define ECHOPRT 0x00000020 +#define ECHOKE 0x00000001 +#define FLUSHO 0x00800000 +#define PENDIN 0x20000000 +#define IEXTEN 0x00000400 + +/* Values for the ACTION argument to `tcflow'. */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* Values for the QUEUE_SELECTOR argument to `tcflush'. */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ALPHA_TERMBITS_H */ diff --git a/arch/alpha/include/asm/termios.h b/arch/alpha/include/asm/termios.h new file mode 100644 index 000000000000..fa13716a11c3 --- /dev/null +++ b/arch/alpha/include/asm/termios.h @@ -0,0 +1,146 @@ +#ifndef _ALPHA_TERMIOS_H +#define _ALPHA_TERMIOS_H + +#include <asm/ioctls.h> +#include <asm/termbits.h> + +struct sgttyb { + char sg_ispeed; + char sg_ospeed; + char sg_erase; + char sg_kill; + short sg_flags; +}; + +struct tchars { + char t_intrc; + char t_quitc; + char t_startc; + char t_stopc; + char t_eofc; + char t_brkc; +}; + +struct ltchars { + char t_suspc; + char t_dsuspc; + char t_rprntc; + char t_flushc; + char t_werasc; + char t_lnextc; +}; + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* + * c_cc characters in the termio structure. Oh, how I love being + * backwardly compatible. Notice that character 4 and 5 are + * interpreted differently depending on whether ICANON is set in + * c_lflag. If it's set, they are used as _VEOF and _VEOL, otherwise + * as _VMIN and V_TIME. This is for compatibility with OSF/1 (which + * is compatible with sysV)... + */ +#define _VINTR 0 +#define _VQUIT 1 +#define _VERASE 2 +#define _VKILL 3 +#define _VEOF 4 +#define _VMIN 4 +#define _VEOL 5 +#define _VTIME 5 +#define _VEOL2 6 +#define _VSWTC 7 + +#ifdef __KERNEL__ +/* eof=^D eol=\0 eol2=\0 erase=del + werase=^W kill=^U reprint=^R sxtc=\0 + intr=^C quit=^\ susp=^Z <OSF/1 VDSUSP> + start=^Q stop=^S lnext=^V discard=^U + vmin=\1 vtime=\0 +*/ +#define INIT_C_CC "\004\000\000\177\027\025\022\000\003\034\032\000\021\023\026\025\001\000" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ + +#define user_termio_to_kernel_termios(a_termios, u_termio) \ +({ \ + struct ktermios *k_termios = (a_termios); \ + struct termio k_termio; \ + int canon, ret; \ + \ + ret = copy_from_user(&k_termio, u_termio, sizeof(k_termio)); \ + if (!ret) { \ + /* Overwrite only the low bits. */ \ + *(unsigned short *)&k_termios->c_iflag = k_termio.c_iflag; \ + *(unsigned short *)&k_termios->c_oflag = k_termio.c_oflag; \ + *(unsigned short *)&k_termios->c_cflag = k_termio.c_cflag; \ + *(unsigned short *)&k_termios->c_lflag = k_termio.c_lflag; \ + canon = k_termio.c_lflag & ICANON; \ + \ + k_termios->c_cc[VINTR] = k_termio.c_cc[_VINTR]; \ + k_termios->c_cc[VQUIT] = k_termio.c_cc[_VQUIT]; \ + k_termios->c_cc[VERASE] = k_termio.c_cc[_VERASE]; \ + k_termios->c_cc[VKILL] = k_termio.c_cc[_VKILL]; \ + k_termios->c_cc[VEOL2] = k_termio.c_cc[_VEOL2]; \ + k_termios->c_cc[VSWTC] = k_termio.c_cc[_VSWTC]; \ + k_termios->c_cc[canon ? VEOF : VMIN] = k_termio.c_cc[_VEOF]; \ + k_termios->c_cc[canon ? VEOL : VTIME] = k_termio.c_cc[_VEOL]; \ + } \ + ret; \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + * + * Note the "fun" _VMIN overloading. + */ +#define kernel_termios_to_user_termio(u_termio, a_termios) \ +({ \ + struct ktermios *k_termios = (a_termios); \ + struct termio k_termio; \ + int canon; \ + \ + k_termio.c_iflag = k_termios->c_iflag; \ + k_termio.c_oflag = k_termios->c_oflag; \ + k_termio.c_cflag = k_termios->c_cflag; \ + canon = (k_termio.c_lflag = k_termios->c_lflag) & ICANON; \ + \ + k_termio.c_line = k_termios->c_line; \ + k_termio.c_cc[_VINTR] = k_termios->c_cc[VINTR]; \ + k_termio.c_cc[_VQUIT] = k_termios->c_cc[VQUIT]; \ + k_termio.c_cc[_VERASE] = k_termios->c_cc[VERASE]; \ + k_termio.c_cc[_VKILL] = k_termios->c_cc[VKILL]; \ + k_termio.c_cc[_VEOF] = k_termios->c_cc[canon ? VEOF : VMIN]; \ + k_termio.c_cc[_VEOL] = k_termios->c_cc[canon ? VEOL : VTIME]; \ + k_termio.c_cc[_VEOL2] = k_termios->c_cc[VEOL2]; \ + k_termio.c_cc[_VSWTC] = k_termios->c_cc[VSWTC]; \ + \ + copy_to_user(u_termio, &k_termio, sizeof(k_termio)); \ +}) + +#define user_termios_to_kernel_termios(k, u) \ + copy_from_user(k, u, sizeof(struct termios)) + +#define kernel_termios_to_user_termios(u, k) \ + copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* _ALPHA_TERMIOS_H */ diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h new file mode 100644 index 000000000000..15fda4344424 --- /dev/null +++ b/arch/alpha/include/asm/thread_info.h @@ -0,0 +1,114 @@ +#ifndef _ALPHA_THREAD_INFO_H +#define _ALPHA_THREAD_INFO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include <asm/processor.h> +#include <asm/types.h> +#include <asm/hwrpb.h> +#endif + +#ifndef __ASSEMBLY__ +struct thread_info { + struct pcb_struct pcb; /* palcode state */ + + struct task_struct *task; /* main task structure */ + unsigned int flags; /* low level flags */ + unsigned int ieee_state; /* see fpu.h */ + + struct exec_domain *exec_domain; /* execution domain */ + mm_segment_t addr_limit; /* thread address space */ + unsigned cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + + int bpt_nsaved; + unsigned long bpt_addr[2]; /* breakpoint handling */ + unsigned int bpt_insn[2]; + + struct restart_block restart_block; +}; + +/* + * Macros/functions for gaining access to the thread information structure. + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* How to get the thread information struct from C. */ +register struct thread_info *__current_thread_info __asm__("$8"); +#define current_thread_info() __current_thread_info + +/* Thread information allocation. */ +#define THREAD_SIZE_ORDER 1 +#define THREAD_SIZE (2*PAGE_SIZE) + +#endif /* __ASSEMBLY__ */ + +#define PREEMPT_ACTIVE 0x40000000 + +/* + * Thread information flags: + * - these are process state flags and used from assembly + * - pending work-to-be-done flags come first to fit in and immediate operand. + * + * TIF_SYSCALL_TRACE is known to be 0 via blbs. + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 3 /* poll_idle is polling NEED_RESCHED */ +#define TIF_DIE_IF_KERNEL 4 /* dik recursion lock */ +#define TIF_UAC_NOPRINT 5 /* see sysinfo.h */ +#define TIF_UAC_NOFIX 6 +#define TIF_UAC_SIGBUS 7 +#define TIF_MEMDIE 8 +#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ + +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) +#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) + +/* Work to do on interrupt/exception return. */ +#define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED) + +/* Work to do on any return to userspace. */ +#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \ + | _TIF_SYSCALL_TRACE) + +#define ALPHA_UAC_SHIFT 6 +#define ALPHA_UAC_MASK (1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \ + 1 << TIF_UAC_SIGBUS) + +#define SET_UNALIGN_CTL(task,value) ({ \ + task_thread_info(task)->flags = ((task_thread_info(task)->flags & \ + ~ALPHA_UAC_MASK) \ + | (((value) << ALPHA_UAC_SHIFT) & (1<<TIF_UAC_NOPRINT))\ + | (((value) << (ALPHA_UAC_SHIFT + 1)) & (1<<TIF_UAC_SIGBUS)) \ + | (((value) << (ALPHA_UAC_SHIFT - 1)) & (1<<TIF_UAC_NOFIX)));\ + 0; }) + +#define GET_UNALIGN_CTL(task,value) ({ \ + put_user((task_thread_info(task)->flags & (1 << TIF_UAC_NOPRINT))\ + >> ALPHA_UAC_SHIFT \ + | (task_thread_info(task)->flags & (1 << TIF_UAC_SIGBUS))\ + >> (ALPHA_UAC_SHIFT + 1) \ + | (task_thread_info(task)->flags & (1 << TIF_UAC_NOFIX))\ + >> (ALPHA_UAC_SHIFT - 1), \ + (int __user *)(value)); \ + }) + +#endif /* __KERNEL__ */ +#endif /* _ALPHA_THREAD_INFO_H */ diff --git a/arch/alpha/include/asm/timex.h b/arch/alpha/include/asm/timex.h new file mode 100644 index 000000000000..afa0c45e3e98 --- /dev/null +++ b/arch/alpha/include/asm/timex.h @@ -0,0 +1,31 @@ +/* + * linux/include/asm-alpha/timex.h + * + * ALPHA architecture timex specifications + */ +#ifndef _ASMALPHA_TIMEX_H +#define _ASMALPHA_TIMEX_H + +/* With only one or two oddballs, we use the RTC as the ticker, selecting + the 32.768kHz reference clock, which nicely divides down to our HZ. */ +#define CLOCK_TICK_RATE 32768 + +/* + * Standard way to access the cycle counter. + * Currently only used on SMP for scheduling. + * + * Only the low 32 bits are available as a continuously counting entity. + * But this only means we'll force a reschedule every 8 seconds or so, + * which isn't an evil thing. + */ + +typedef unsigned int cycles_t; + +static inline cycles_t get_cycles (void) +{ + cycles_t ret; + __asm__ __volatile__ ("rpcc %0" : "=r"(ret)); + return ret; +} + +#endif diff --git a/arch/alpha/include/asm/tlb.h b/arch/alpha/include/asm/tlb.h new file mode 100644 index 000000000000..c13636575fba --- /dev/null +++ b/arch/alpha/include/asm/tlb.h @@ -0,0 +1,15 @@ +#ifndef _ALPHA_TLB_H +#define _ALPHA_TLB_H + +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, pte, addr) do { } while (0) + +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include <asm-generic/tlb.h> + +#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) +#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) + +#endif diff --git a/arch/alpha/include/asm/tlbflush.h b/arch/alpha/include/asm/tlbflush.h new file mode 100644 index 000000000000..9d87aaa08c0d --- /dev/null +++ b/arch/alpha/include/asm/tlbflush.h @@ -0,0 +1,151 @@ +#ifndef _ALPHA_TLBFLUSH_H +#define _ALPHA_TLBFLUSH_H + +#include <linux/mm.h> +#include <asm/compiler.h> +#include <asm/pgalloc.h> + +#ifndef __EXTERN_INLINE +#define __EXTERN_INLINE extern inline +#define __MMU_EXTERN_INLINE +#endif + +extern void __load_new_mm_context(struct mm_struct *); + + +/* Use a few helper functions to hide the ugly broken ASN + numbers on early Alphas (ev4 and ev45). */ + +__EXTERN_INLINE void +ev4_flush_tlb_current(struct mm_struct *mm) +{ + __load_new_mm_context(mm); + tbiap(); +} + +__EXTERN_INLINE void +ev5_flush_tlb_current(struct mm_struct *mm) +{ + __load_new_mm_context(mm); +} + +/* Flush just one page in the current TLB set. We need to be very + careful about the icache here, there is no way to invalidate a + specific icache page. */ + +__EXTERN_INLINE void +ev4_flush_tlb_current_page(struct mm_struct * mm, + struct vm_area_struct *vma, + unsigned long addr) +{ + int tbi_flag = 2; + if (vma->vm_flags & VM_EXEC) { + __load_new_mm_context(mm); + tbi_flag = 3; + } + tbi(tbi_flag, addr); +} + +__EXTERN_INLINE void +ev5_flush_tlb_current_page(struct mm_struct * mm, + struct vm_area_struct *vma, + unsigned long addr) +{ + if (vma->vm_flags & VM_EXEC) + __load_new_mm_context(mm); + else + tbi(2, addr); +} + + +#ifdef CONFIG_ALPHA_GENERIC +# define flush_tlb_current alpha_mv.mv_flush_tlb_current +# define flush_tlb_current_page alpha_mv.mv_flush_tlb_current_page +#else +# ifdef CONFIG_ALPHA_EV4 +# define flush_tlb_current ev4_flush_tlb_current +# define flush_tlb_current_page ev4_flush_tlb_current_page +# else +# define flush_tlb_current ev5_flush_tlb_current +# define flush_tlb_current_page ev5_flush_tlb_current_page +# endif +#endif + +#ifdef __MMU_EXTERN_INLINE +#undef __EXTERN_INLINE +#undef __MMU_EXTERN_INLINE +#endif + +/* Flush current user mapping. */ +static inline void +flush_tlb(void) +{ + flush_tlb_current(current->active_mm); +} + +/* Flush someone else's user mapping. */ +static inline void +flush_tlb_other(struct mm_struct *mm) +{ + unsigned long *mmc = &mm->context[smp_processor_id()]; + /* Check it's not zero first to avoid cacheline ping pong + when possible. */ + if (*mmc) *mmc = 0; +} + +#ifndef CONFIG_SMP +/* Flush everything (kernel mapping may also have changed + due to vmalloc/vfree). */ +static inline void flush_tlb_all(void) +{ + tbia(); +} + +/* Flush a specified user mapping. */ +static inline void +flush_tlb_mm(struct mm_struct *mm) +{ + if (mm == current->active_mm) + flush_tlb_current(mm); + else + flush_tlb_other(mm); +} + +/* Page-granular tlb flush. */ +static inline void +flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) +{ + struct mm_struct *mm = vma->vm_mm; + + if (mm == current->active_mm) + flush_tlb_current_page(mm, vma, addr); + else + flush_tlb_other(mm); +} + +/* Flush a specified range of user mapping. On the Alpha we flush + the whole user tlb. */ +static inline void +flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + flush_tlb_mm(vma->vm_mm); +} + +#else /* CONFIG_SMP */ + +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *); +extern void flush_tlb_page(struct vm_area_struct *, unsigned long); +extern void flush_tlb_range(struct vm_area_struct *, unsigned long, + unsigned long); + +#endif /* CONFIG_SMP */ + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + flush_tlb_all(); +} + +#endif /* _ALPHA_TLBFLUSH_H */ diff --git a/arch/alpha/include/asm/topology.h b/arch/alpha/include/asm/topology.h new file mode 100644 index 000000000000..149532e162c4 --- /dev/null +++ b/arch/alpha/include/asm/topology.h @@ -0,0 +1,47 @@ +#ifndef _ASM_ALPHA_TOPOLOGY_H +#define _ASM_ALPHA_TOPOLOGY_H + +#include <linux/smp.h> +#include <linux/threads.h> +#include <asm/machvec.h> + +#ifdef CONFIG_NUMA +static inline int cpu_to_node(int cpu) +{ + int node; + + if (!alpha_mv.cpuid_to_nid) + return 0; + + node = alpha_mv.cpuid_to_nid(cpu); + +#ifdef DEBUG_NUMA + BUG_ON(node < 0); +#endif + + return node; +} + +static inline cpumask_t node_to_cpumask(int node) +{ + cpumask_t node_cpu_mask = CPU_MASK_NONE; + int cpu; + + for_each_online_cpu(cpu) { + if (cpu_to_node(cpu) == node) + cpu_set(cpu, node_cpu_mask); + } + +#ifdef DEBUG_NUMA + printk("node %d: cpu_mask: %016lx\n", node, node_cpu_mask); +#endif + + return node_cpu_mask; +} + +#define pcibus_to_cpumask(bus) (cpu_online_map) + +#endif /* !CONFIG_NUMA */ +# include <asm-generic/topology.h> + +#endif /* _ASM_ALPHA_TOPOLOGY_H */ diff --git a/arch/alpha/include/asm/types.h b/arch/alpha/include/asm/types.h new file mode 100644 index 000000000000..c1541353ccef --- /dev/null +++ b/arch/alpha/include/asm/types.h @@ -0,0 +1,33 @@ +#ifndef _ALPHA_TYPES_H +#define _ALPHA_TYPES_H + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ +#include <asm-generic/int-l64.h> + +#ifndef __ASSEMBLY__ + +typedef unsigned int umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 64 + +#ifndef __ASSEMBLY__ + +typedef u64 dma_addr_t; +typedef u64 dma64_addr_t; + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ALPHA_TYPES_H */ diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h new file mode 100644 index 000000000000..22de3b434a22 --- /dev/null +++ b/arch/alpha/include/asm/uaccess.h @@ -0,0 +1,511 @@ +#ifndef __ALPHA_UACCESS_H +#define __ALPHA_UACCESS_H + +#include <linux/errno.h> +#include <linux/sched.h> + + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * Or at least it did once upon a time. Nowadays it is a mask that + * defines which bits of the address space are off limits. This is a + * wee bit faster than the above. + * + * For historical reasons, these macros are grossly misnamed. + */ + +#define KERNEL_DS ((mm_segment_t) { 0UL }) +#define USER_DS ((mm_segment_t) { -0x40000000000UL }) + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define get_fs() (current_thread_info()->addr_limit) +#define get_ds() (KERNEL_DS) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#define segment_eq(a,b) ((a).seg == (b).seg) + +/* + * Is a address valid? This does a straightforward calculation rather + * than tests. + * + * Address valid if: + * - "addr" doesn't have any high-bits set + * - AND "size" doesn't have any high-bits set + * - AND "addr+size" doesn't have any high-bits set + * - OR we are in kernel mode. + */ +#define __access_ok(addr,size,segment) \ + (((segment).seg & (addr | size | (addr+size))) == 0) + +#define access_ok(type,addr,size) \ +({ \ + __chk_user_ptr(addr); \ + __access_ok(((unsigned long)(addr)),(size),get_fs()); \ +}) + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + * + * As the alpha uses the same address space for kernel and user + * data, we can just do these as direct assignments. (Of course, the + * exception handling means that it's no longer "just"...) + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof/typeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define put_user(x,ptr) \ + __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)),get_fs()) +#define get_user(x,ptr) \ + __get_user_check((x),(ptr),sizeof(*(ptr)),get_fs()) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the programmer has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) \ + __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) +#define __get_user(x,ptr) \ + __get_user_nocheck((x),(ptr),sizeof(*(ptr))) + +/* + * The "lda %1, 2b-1b(%0)" bits are magic to get the assembler to + * encode the bits we need for resolving the exception. See the + * more extensive comments with fixup_inline_exception below for + * more information. + */ + +extern void __get_user_unknown(void); + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err = 0; \ + unsigned long __gu_val; \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: __get_user_8(ptr); break; \ + case 2: __get_user_16(ptr); break; \ + case 4: __get_user_32(ptr); break; \ + case 8: __get_user_64(ptr); break; \ + default: __get_user_unknown(); break; \ + } \ + (x) = (__typeof__(*(ptr))) __gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size,segment) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + if (__access_ok((unsigned long)__gu_addr,size,segment)) { \ + __gu_err = 0; \ + switch (size) { \ + case 1: __get_user_8(__gu_addr); break; \ + case 2: __get_user_16(__gu_addr); break; \ + case 4: __get_user_32(__gu_addr); break; \ + case 8: __get_user_64(__gu_addr); break; \ + default: __get_user_unknown(); break; \ + } \ + } \ + (x) = (__typeof__(*(ptr))) __gu_val; \ + __gu_err; \ +}) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct __user *)(x)) + +#define __get_user_64(addr) \ + __asm__("1: ldq %0,%2\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda %0, 2b-1b(%1)\n" \ + ".previous" \ + : "=r"(__gu_val), "=r"(__gu_err) \ + : "m"(__m(addr)), "1"(__gu_err)) + +#define __get_user_32(addr) \ + __asm__("1: ldl %0,%2\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda %0, 2b-1b(%1)\n" \ + ".previous" \ + : "=r"(__gu_val), "=r"(__gu_err) \ + : "m"(__m(addr)), "1"(__gu_err)) + +#ifdef __alpha_bwx__ +/* Those lucky bastards with ev56 and later CPUs can do byte/word moves. */ + +#define __get_user_16(addr) \ + __asm__("1: ldwu %0,%2\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda %0, 2b-1b(%1)\n" \ + ".previous" \ + : "=r"(__gu_val), "=r"(__gu_err) \ + : "m"(__m(addr)), "1"(__gu_err)) + +#define __get_user_8(addr) \ + __asm__("1: ldbu %0,%2\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda %0, 2b-1b(%1)\n" \ + ".previous" \ + : "=r"(__gu_val), "=r"(__gu_err) \ + : "m"(__m(addr)), "1"(__gu_err)) +#else +/* Unfortunately, we can't get an unaligned access trap for the sub-word + load, so we have to do a general unaligned operation. */ + +#define __get_user_16(addr) \ +{ \ + long __gu_tmp; \ + __asm__("1: ldq_u %0,0(%3)\n" \ + "2: ldq_u %1,1(%3)\n" \ + " extwl %0,%3,%0\n" \ + " extwh %1,%3,%1\n" \ + " or %0,%1,%0\n" \ + "3:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda %0, 3b-1b(%2)\n" \ + " .long 2b - .\n" \ + " lda %0, 3b-2b(%2)\n" \ + ".previous" \ + : "=&r"(__gu_val), "=&r"(__gu_tmp), "=r"(__gu_err) \ + : "r"(addr), "2"(__gu_err)); \ +} + +#define __get_user_8(addr) \ + __asm__("1: ldq_u %0,0(%2)\n" \ + " extbl %0,%2,%0\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda %0, 2b-1b(%1)\n" \ + ".previous" \ + : "=&r"(__gu_val), "=r"(__gu_err) \ + : "r"(addr), "1"(__gu_err)) +#endif + +extern void __put_user_unknown(void); + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err = 0; \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: __put_user_8(x,ptr); break; \ + case 2: __put_user_16(x,ptr); break; \ + case 4: __put_user_32(x,ptr); break; \ + case 8: __put_user_64(x,ptr); break; \ + default: __put_user_unknown(); break; \ + } \ + __pu_err; \ +}) + +#define __put_user_check(x,ptr,size,segment) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + if (__access_ok((unsigned long)__pu_addr,size,segment)) { \ + __pu_err = 0; \ + switch (size) { \ + case 1: __put_user_8(x,__pu_addr); break; \ + case 2: __put_user_16(x,__pu_addr); break; \ + case 4: __put_user_32(x,__pu_addr); break; \ + case 8: __put_user_64(x,__pu_addr); break; \ + default: __put_user_unknown(); break; \ + } \ + } \ + __pu_err; \ +}) + +/* + * The "__put_user_xx()" macros tell gcc they read from memory + * instead of writing: this is because they do not write to + * any memory gcc knows about, so there are no aliasing issues + */ +#define __put_user_64(x,addr) \ +__asm__ __volatile__("1: stq %r2,%1\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda $31,2b-1b(%0)\n" \ + ".previous" \ + : "=r"(__pu_err) \ + : "m" (__m(addr)), "rJ" (x), "0"(__pu_err)) + +#define __put_user_32(x,addr) \ +__asm__ __volatile__("1: stl %r2,%1\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda $31,2b-1b(%0)\n" \ + ".previous" \ + : "=r"(__pu_err) \ + : "m"(__m(addr)), "rJ"(x), "0"(__pu_err)) + +#ifdef __alpha_bwx__ +/* Those lucky bastards with ev56 and later CPUs can do byte/word moves. */ + +#define __put_user_16(x,addr) \ +__asm__ __volatile__("1: stw %r2,%1\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda $31,2b-1b(%0)\n" \ + ".previous" \ + : "=r"(__pu_err) \ + : "m"(__m(addr)), "rJ"(x), "0"(__pu_err)) + +#define __put_user_8(x,addr) \ +__asm__ __volatile__("1: stb %r2,%1\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda $31,2b-1b(%0)\n" \ + ".previous" \ + : "=r"(__pu_err) \ + : "m"(__m(addr)), "rJ"(x), "0"(__pu_err)) +#else +/* Unfortunately, we can't get an unaligned access trap for the sub-word + write, so we have to do a general unaligned operation. */ + +#define __put_user_16(x,addr) \ +{ \ + long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4; \ + __asm__ __volatile__( \ + "1: ldq_u %2,1(%5)\n" \ + "2: ldq_u %1,0(%5)\n" \ + " inswh %6,%5,%4\n" \ + " inswl %6,%5,%3\n" \ + " mskwh %2,%5,%2\n" \ + " mskwl %1,%5,%1\n" \ + " or %2,%4,%2\n" \ + " or %1,%3,%1\n" \ + "3: stq_u %2,1(%5)\n" \ + "4: stq_u %1,0(%5)\n" \ + "5:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda $31, 5b-1b(%0)\n" \ + " .long 2b - .\n" \ + " lda $31, 5b-2b(%0)\n" \ + " .long 3b - .\n" \ + " lda $31, 5b-3b(%0)\n" \ + " .long 4b - .\n" \ + " lda $31, 5b-4b(%0)\n" \ + ".previous" \ + : "=r"(__pu_err), "=&r"(__pu_tmp1), \ + "=&r"(__pu_tmp2), "=&r"(__pu_tmp3), \ + "=&r"(__pu_tmp4) \ + : "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \ +} + +#define __put_user_8(x,addr) \ +{ \ + long __pu_tmp1, __pu_tmp2; \ + __asm__ __volatile__( \ + "1: ldq_u %1,0(%4)\n" \ + " insbl %3,%4,%2\n" \ + " mskbl %1,%4,%1\n" \ + " or %1,%2,%1\n" \ + "2: stq_u %1,0(%4)\n" \ + "3:\n" \ + ".section __ex_table,\"a\"\n" \ + " .long 1b - .\n" \ + " lda $31, 3b-1b(%0)\n" \ + " .long 2b - .\n" \ + " lda $31, 3b-2b(%0)\n" \ + ".previous" \ + : "=r"(__pu_err), \ + "=&r"(__pu_tmp1), "=&r"(__pu_tmp2) \ + : "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \ +} +#endif + + +/* + * Complex access routines + */ + +/* This little bit of silliness is to get the GP loaded for a function + that ordinarily wouldn't. Otherwise we could have it done by the macro + directly, which can be optimized the linker. */ +#ifdef MODULE +#define __module_address(sym) "r"(sym), +#define __module_call(ra, arg, sym) "jsr $" #ra ",(%" #arg ")," #sym +#else +#define __module_address(sym) +#define __module_call(ra, arg, sym) "bsr $" #ra "," #sym " !samegp" +#endif + +extern void __copy_user(void); + +extern inline long +__copy_tofrom_user_nocheck(void *to, const void *from, long len) +{ + register void * __cu_to __asm__("$6") = to; + register const void * __cu_from __asm__("$7") = from; + register long __cu_len __asm__("$0") = len; + + __asm__ __volatile__( + __module_call(28, 3, __copy_user) + : "=r" (__cu_len), "=r" (__cu_from), "=r" (__cu_to) + : __module_address(__copy_user) + "0" (__cu_len), "1" (__cu_from), "2" (__cu_to) + : "$1","$2","$3","$4","$5","$28","memory"); + + return __cu_len; +} + +extern inline long +__copy_tofrom_user(void *to, const void *from, long len, const void __user *validate) +{ + if (__access_ok((unsigned long)validate, len, get_fs())) + len = __copy_tofrom_user_nocheck(to, from, len); + return len; +} + +#define __copy_to_user(to,from,n) \ +({ \ + __chk_user_ptr(to); \ + __copy_tofrom_user_nocheck((__force void *)(to),(from),(n)); \ +}) +#define __copy_from_user(to,from,n) \ +({ \ + __chk_user_ptr(from); \ + __copy_tofrom_user_nocheck((to),(__force void *)(from),(n)); \ +}) + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + + +extern inline long +copy_to_user(void __user *to, const void *from, long n) +{ + return __copy_tofrom_user((__force void *)to, from, n, to); +} + +extern inline long +copy_from_user(void *to, const void __user *from, long n) +{ + return __copy_tofrom_user(to, (__force void *)from, n, from); +} + +extern void __do_clear_user(void); + +extern inline long +__clear_user(void __user *to, long len) +{ + register void __user * __cl_to __asm__("$6") = to; + register long __cl_len __asm__("$0") = len; + __asm__ __volatile__( + __module_call(28, 2, __do_clear_user) + : "=r"(__cl_len), "=r"(__cl_to) + : __module_address(__do_clear_user) + "0"(__cl_len), "1"(__cl_to) + : "$1","$2","$3","$4","$5","$28","memory"); + return __cl_len; +} + +extern inline long +clear_user(void __user *to, long len) +{ + if (__access_ok((unsigned long)to, len, get_fs())) + len = __clear_user(to, len); + return len; +} + +#undef __module_address +#undef __module_call + +/* Returns: -EFAULT if exception before terminator, N if the entire + buffer filled, else strlen. */ + +extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len); + +extern inline long +strncpy_from_user(char *to, const char __user *from, long n) +{ + long ret = -EFAULT; + if (__access_ok((unsigned long)from, 0, get_fs())) + ret = __strncpy_from_user(to, from, n); + return ret; +} + +/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ +extern long __strlen_user(const char __user *); + +extern inline long strlen_user(const char __user *str) +{ + return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0; +} + +/* Returns: 0 if exception before NUL or reaching the supplied limit (N), + * a value greater than N if the limit would be exceeded, else strlen. */ +extern long __strnlen_user(const char __user *, long); + +extern inline long strnlen_user(const char __user *str, long n) +{ + return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0; +} + +/* + * About the exception table: + * + * - insn is a 32-bit pc-relative offset from the faulting insn. + * - nextinsn is a 16-bit offset off of the faulting instruction + * (not off of the *next* instruction as branches are). + * - errreg is the register in which to place -EFAULT. + * - valreg is the final target register for the load sequence + * and will be zeroed. + * + * Either errreg or valreg may be $31, in which case nothing happens. + * + * The exception fixup information "just so happens" to be arranged + * as in a MEM format instruction. This lets us emit our three + * values like so: + * + * lda valreg, nextinsn(errreg) + * + */ + +struct exception_table_entry +{ + signed int insn; + union exception_fixup { + unsigned unit; + struct { + signed int nextinsn : 16; + unsigned int errreg : 5; + unsigned int valreg : 5; + } bits; + } fixup; +}; + +/* Returns the new pc */ +#define fixup_exception(map_reg, fixup, pc) \ +({ \ + if ((fixup)->fixup.bits.valreg != 31) \ + map_reg((fixup)->fixup.bits.valreg) = 0; \ + if ((fixup)->fixup.bits.errreg != 31) \ + map_reg((fixup)->fixup.bits.errreg) = -EFAULT; \ + (pc) + (fixup)->fixup.bits.nextinsn; \ +}) + + +#endif /* __ALPHA_UACCESS_H */ diff --git a/arch/alpha/include/asm/ucontext.h b/arch/alpha/include/asm/ucontext.h new file mode 100644 index 000000000000..47578ab42152 --- /dev/null +++ b/arch/alpha/include/asm/ucontext.h @@ -0,0 +1,13 @@ +#ifndef _ASMAXP_UCONTEXT_H +#define _ASMAXP_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + old_sigset_t uc_osf_sigmask; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* !_ASMAXP_UCONTEXT_H */ diff --git a/arch/alpha/include/asm/unaligned.h b/arch/alpha/include/asm/unaligned.h new file mode 100644 index 000000000000..3787c60aed3f --- /dev/null +++ b/arch/alpha/include/asm/unaligned.h @@ -0,0 +1,11 @@ +#ifndef _ASM_ALPHA_UNALIGNED_H +#define _ASM_ALPHA_UNALIGNED_H + +#include <linux/unaligned/le_struct.h> +#include <linux/unaligned/be_byteshift.h> +#include <linux/unaligned/generic.h> + +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le + +#endif /* _ASM_ALPHA_UNALIGNED_H */ diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h new file mode 100644 index 000000000000..5b5c17485942 --- /dev/null +++ b/arch/alpha/include/asm/unistd.h @@ -0,0 +1,464 @@ +#ifndef _ALPHA_UNISTD_H +#define _ALPHA_UNISTD_H + +#define __NR_osf_syscall 0 /* not implemented */ +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_osf_old_open 5 /* not implemented */ +#define __NR_close 6 +#define __NR_osf_wait4 7 +#define __NR_osf_old_creat 8 /* not implemented */ +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_osf_execve 11 /* not implemented */ +#define __NR_chdir 12 +#define __NR_fchdir 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 +#define __NR_brk 17 +#define __NR_osf_getfsstat 18 /* not implemented */ +#define __NR_lseek 19 +#define __NR_getxpid 20 +#define __NR_osf_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getxuid 24 +#define __NR_exec_with_loader 25 /* not implemented */ +#define __NR_ptrace 26 +#define __NR_osf_nrecvmsg 27 /* not implemented */ +#define __NR_osf_nsendmsg 28 /* not implemented */ +#define __NR_osf_nrecvfrom 29 /* not implemented */ +#define __NR_osf_naccept 30 /* not implemented */ +#define __NR_osf_ngetpeername 31 /* not implemented */ +#define __NR_osf_ngetsockname 32 /* not implemented */ +#define __NR_access 33 +#define __NR_osf_chflags 34 /* not implemented */ +#define __NR_osf_fchflags 35 /* not implemented */ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_osf_old_stat 38 /* not implemented */ +#define __NR_setpgid 39 +#define __NR_osf_old_lstat 40 /* not implemented */ +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_osf_set_program_attributes 43 +#define __NR_osf_profil 44 /* not implemented */ +#define __NR_open 45 +#define __NR_osf_old_sigaction 46 /* not implemented */ +#define __NR_getxgid 47 +#define __NR_osf_sigprocmask 48 +#define __NR_osf_getlogin 49 /* not implemented */ +#define __NR_osf_setlogin 50 /* not implemented */ +#define __NR_acct 51 +#define __NR_sigpending 52 + +#define __NR_ioctl 54 +#define __NR_osf_reboot 55 /* not implemented */ +#define __NR_osf_revoke 56 /* not implemented */ +#define __NR_symlink 57 +#define __NR_readlink 58 +#define __NR_execve 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_osf_old_fstat 62 /* not implemented */ +#define __NR_getpgrp 63 +#define __NR_getpagesize 64 +#define __NR_osf_mremap 65 /* not implemented */ +#define __NR_vfork 66 +#define __NR_stat 67 +#define __NR_lstat 68 +#define __NR_osf_sbrk 69 /* not implemented */ +#define __NR_osf_sstk 70 /* not implemented */ +#define __NR_mmap 71 /* OSF/1 mmap is superset of Linux */ +#define __NR_osf_old_vadvise 72 /* not implemented */ +#define __NR_munmap 73 +#define __NR_mprotect 74 +#define __NR_madvise 75 +#define __NR_vhangup 76 +#define __NR_osf_kmodcall 77 /* not implemented */ +#define __NR_osf_mincore 78 /* not implemented */ +#define __NR_getgroups 79 +#define __NR_setgroups 80 +#define __NR_osf_old_getpgrp 81 /* not implemented */ +#define __NR_setpgrp 82 /* BSD alias for setpgid */ +#define __NR_osf_setitimer 83 +#define __NR_osf_old_wait 84 /* not implemented */ +#define __NR_osf_table 85 /* not implemented */ +#define __NR_osf_getitimer 86 +#define __NR_gethostname 87 +#define __NR_sethostname 88 +#define __NR_getdtablesize 89 +#define __NR_dup2 90 +#define __NR_fstat 91 +#define __NR_fcntl 92 +#define __NR_osf_select 93 +#define __NR_poll 94 +#define __NR_fsync 95 +#define __NR_setpriority 96 +#define __NR_socket 97 +#define __NR_connect 98 +#define __NR_accept 99 +#define __NR_getpriority 100 +#define __NR_send 101 +#define __NR_recv 102 +#define __NR_sigreturn 103 +#define __NR_bind 104 +#define __NR_setsockopt 105 +#define __NR_listen 106 +#define __NR_osf_plock 107 /* not implemented */ +#define __NR_osf_old_sigvec 108 /* not implemented */ +#define __NR_osf_old_sigblock 109 /* not implemented */ +#define __NR_osf_old_sigsetmask 110 /* not implemented */ +#define __NR_sigsuspend 111 +#define __NR_osf_sigstack 112 +#define __NR_recvmsg 113 +#define __NR_sendmsg 114 +#define __NR_osf_old_vtrace 115 /* not implemented */ +#define __NR_osf_gettimeofday 116 +#define __NR_osf_getrusage 117 +#define __NR_getsockopt 118 + +#define __NR_readv 120 +#define __NR_writev 121 +#define __NR_osf_settimeofday 122 +#define __NR_fchown 123 +#define __NR_fchmod 124 +#define __NR_recvfrom 125 +#define __NR_setreuid 126 +#define __NR_setregid 127 +#define __NR_rename 128 +#define __NR_truncate 129 +#define __NR_ftruncate 130 +#define __NR_flock 131 +#define __NR_setgid 132 +#define __NR_sendto 133 +#define __NR_shutdown 134 +#define __NR_socketpair 135 +#define __NR_mkdir 136 +#define __NR_rmdir 137 +#define __NR_osf_utimes 138 +#define __NR_osf_old_sigreturn 139 /* not implemented */ +#define __NR_osf_adjtime 140 /* not implemented */ +#define __NR_getpeername 141 +#define __NR_osf_gethostid 142 /* not implemented */ +#define __NR_osf_sethostid 143 /* not implemented */ +#define __NR_getrlimit 144 +#define __NR_setrlimit 145 +#define __NR_osf_old_killpg 146 /* not implemented */ +#define __NR_setsid 147 +#define __NR_quotactl 148 +#define __NR_osf_oldquota 149 /* not implemented */ +#define __NR_getsockname 150 + +#define __NR_osf_pid_block 153 /* not implemented */ +#define __NR_osf_pid_unblock 154 /* not implemented */ + +#define __NR_sigaction 156 +#define __NR_osf_sigwaitprim 157 /* not implemented */ +#define __NR_osf_nfssvc 158 /* not implemented */ +#define __NR_osf_getdirentries 159 +#define __NR_osf_statfs 160 +#define __NR_osf_fstatfs 161 + +#define __NR_osf_asynch_daemon 163 /* not implemented */ +#define __NR_osf_getfh 164 /* not implemented */ +#define __NR_osf_getdomainname 165 +#define __NR_setdomainname 166 + +#define __NR_osf_exportfs 169 /* not implemented */ + +#define __NR_osf_alt_plock 181 /* not implemented */ + +#define __NR_osf_getmnt 184 /* not implemented */ + +#define __NR_osf_alt_sigpending 187 /* not implemented */ +#define __NR_osf_alt_setsid 188 /* not implemented */ + +#define __NR_osf_swapon 199 +#define __NR_msgctl 200 +#define __NR_msgget 201 +#define __NR_msgrcv 202 +#define __NR_msgsnd 203 +#define __NR_semctl 204 +#define __NR_semget 205 +#define __NR_semop 206 +#define __NR_osf_utsname 207 +#define __NR_lchown 208 +#define __NR_osf_shmat 209 +#define __NR_shmctl 210 +#define __NR_shmdt 211 +#define __NR_shmget 212 +#define __NR_osf_mvalid 213 /* not implemented */ +#define __NR_osf_getaddressconf 214 /* not implemented */ +#define __NR_osf_msleep 215 /* not implemented */ +#define __NR_osf_mwakeup 216 /* not implemented */ +#define __NR_msync 217 +#define __NR_osf_signal 218 /* not implemented */ +#define __NR_osf_utc_gettime 219 /* not implemented */ +#define __NR_osf_utc_adjtime 220 /* not implemented */ + +#define __NR_osf_security 222 /* not implemented */ +#define __NR_osf_kloadcall 223 /* not implemented */ + +#define __NR_getpgid 233 +#define __NR_getsid 234 +#define __NR_sigaltstack 235 +#define __NR_osf_waitid 236 /* not implemented */ +#define __NR_osf_priocntlset 237 /* not implemented */ +#define __NR_osf_sigsendset 238 /* not implemented */ +#define __NR_osf_set_speculative 239 /* not implemented */ +#define __NR_osf_msfs_syscall 240 /* not implemented */ +#define __NR_osf_sysinfo 241 +#define __NR_osf_uadmin 242 /* not implemented */ +#define __NR_osf_fuser 243 /* not implemented */ +#define __NR_osf_proplist_syscall 244 +#define __NR_osf_ntp_adjtime 245 /* not implemented */ +#define __NR_osf_ntp_gettime 246 /* not implemented */ +#define __NR_osf_pathconf 247 /* not implemented */ +#define __NR_osf_fpathconf 248 /* not implemented */ + +#define __NR_osf_uswitch 250 /* not implemented */ +#define __NR_osf_usleep_thread 251 +#define __NR_osf_audcntl 252 /* not implemented */ +#define __NR_osf_audgen 253 /* not implemented */ +#define __NR_sysfs 254 +#define __NR_osf_subsys_info 255 /* not implemented */ +#define __NR_osf_getsysinfo 256 +#define __NR_osf_setsysinfo 257 +#define __NR_osf_afs_syscall 258 /* not implemented */ +#define __NR_osf_swapctl 259 /* not implemented */ +#define __NR_osf_memcntl 260 /* not implemented */ +#define __NR_osf_fdatasync 261 /* not implemented */ + +/* + * Ignore legacy syscalls that we don't use. + */ +#define __IGNORE_alarm +#define __IGNORE_creat +#define __IGNORE_getegid +#define __IGNORE_geteuid +#define __IGNORE_getgid +#define __IGNORE_getpid +#define __IGNORE_getppid +#define __IGNORE_getuid +#define __IGNORE_pause +#define __IGNORE_time +#define __IGNORE_utime + +/* + * Linux-specific system calls begin at 300 + */ +#define __NR_bdflush 300 +#define __NR_sethae 301 +#define __NR_mount 302 +#define __NR_old_adjtimex 303 +#define __NR_swapoff 304 +#define __NR_getdents 305 +#define __NR_create_module 306 +#define __NR_init_module 307 +#define __NR_delete_module 308 +#define __NR_get_kernel_syms 309 +#define __NR_syslog 310 +#define __NR_reboot 311 +#define __NR_clone 312 +#define __NR_uselib 313 +#define __NR_mlock 314 +#define __NR_munlock 315 +#define __NR_mlockall 316 +#define __NR_munlockall 317 +#define __NR_sysinfo 318 +#define __NR__sysctl 319 +/* 320 was sys_idle. */ +#define __NR_oldumount 321 +#define __NR_swapon 322 +#define __NR_times 323 +#define __NR_personality 324 +#define __NR_setfsuid 325 +#define __NR_setfsgid 326 +#define __NR_ustat 327 +#define __NR_statfs 328 +#define __NR_fstatfs 329 +#define __NR_sched_setparam 330 +#define __NR_sched_getparam 331 +#define __NR_sched_setscheduler 332 +#define __NR_sched_getscheduler 333 +#define __NR_sched_yield 334 +#define __NR_sched_get_priority_max 335 +#define __NR_sched_get_priority_min 336 +#define __NR_sched_rr_get_interval 337 +#define __NR_afs_syscall 338 +#define __NR_uname 339 +#define __NR_nanosleep 340 +#define __NR_mremap 341 +#define __NR_nfsservctl 342 +#define __NR_setresuid 343 +#define __NR_getresuid 344 +#define __NR_pciconfig_read 345 +#define __NR_pciconfig_write 346 +#define __NR_query_module 347 +#define __NR_prctl 348 +#define __NR_pread64 349 +#define __NR_pwrite64 350 +#define __NR_rt_sigreturn 351 +#define __NR_rt_sigaction 352 +#define __NR_rt_sigprocmask 353 +#define __NR_rt_sigpending 354 +#define __NR_rt_sigtimedwait 355 +#define __NR_rt_sigqueueinfo 356 +#define __NR_rt_sigsuspend 357 +#define __NR_select 358 +#define __NR_gettimeofday 359 +#define __NR_settimeofday 360 +#define __NR_getitimer 361 +#define __NR_setitimer 362 +#define __NR_utimes 363 +#define __NR_getrusage 364 +#define __NR_wait4 365 +#define __NR_adjtimex 366 +#define __NR_getcwd 367 +#define __NR_capget 368 +#define __NR_capset 369 +#define __NR_sendfile 370 +#define __NR_setresgid 371 +#define __NR_getresgid 372 +#define __NR_dipc 373 +#define __NR_pivot_root 374 +#define __NR_mincore 375 +#define __NR_pciconfig_iobase 376 +#define __NR_getdents64 377 +#define __NR_gettid 378 +#define __NR_readahead 379 +/* 380 is unused */ +#define __NR_tkill 381 +#define __NR_setxattr 382 +#define __NR_lsetxattr 383 +#define __NR_fsetxattr 384 +#define __NR_getxattr 385 +#define __NR_lgetxattr 386 +#define __NR_fgetxattr 387 +#define __NR_listxattr 388 +#define __NR_llistxattr 389 +#define __NR_flistxattr 390 +#define __NR_removexattr 391 +#define __NR_lremovexattr 392 +#define __NR_fremovexattr 393 +#define __NR_futex 394 +#define __NR_sched_setaffinity 395 +#define __NR_sched_getaffinity 396 +#define __NR_tuxcall 397 +#define __NR_io_setup 398 +#define __NR_io_destroy 399 +#define __NR_io_getevents 400 +#define __NR_io_submit 401 +#define __NR_io_cancel 402 +#define __NR_exit_group 405 +#define __NR_lookup_dcookie 406 +#define __NR_epoll_create 407 +#define __NR_epoll_ctl 408 +#define __NR_epoll_wait 409 +/* Feb 2007: These three sys_epoll defines shouldn't be here but culling + * them would break userspace apps ... we'll kill them off in 2010 :) */ +#define __NR_sys_epoll_create __NR_epoll_create +#define __NR_sys_epoll_ctl __NR_epoll_ctl +#define __NR_sys_epoll_wait __NR_epoll_wait +#define __NR_remap_file_pages 410 +#define __NR_set_tid_address 411 +#define __NR_restart_syscall 412 +#define __NR_fadvise64 413 +#define __NR_timer_create 414 +#define __NR_timer_settime 415 +#define __NR_timer_gettime 416 +#define __NR_timer_getoverrun 417 +#define __NR_timer_delete 418 +#define __NR_clock_settime 419 +#define __NR_clock_gettime 420 +#define __NR_clock_getres 421 +#define __NR_clock_nanosleep 422 +#define __NR_semtimedop 423 +#define __NR_tgkill 424 +#define __NR_stat64 425 +#define __NR_lstat64 426 +#define __NR_fstat64 427 +#define __NR_vserver 428 +#define __NR_mbind 429 +#define __NR_get_mempolicy 430 +#define __NR_set_mempolicy 431 +#define __NR_mq_open 432 +#define __NR_mq_unlink 433 +#define __NR_mq_timedsend 434 +#define __NR_mq_timedreceive 435 +#define __NR_mq_notify 436 +#define __NR_mq_getsetattr 437 +#define __NR_waitid 438 +#define __NR_add_key 439 +#define __NR_request_key 440 +#define __NR_keyctl 441 +#define __NR_ioprio_set 442 +#define __NR_ioprio_get 443 +#define __NR_inotify_init 444 +#define __NR_inotify_add_watch 445 +#define __NR_inotify_rm_watch 446 +#define __NR_fdatasync 447 +#define __NR_kexec_load 448 +#define __NR_migrate_pages 449 +#define __NR_openat 450 +#define __NR_mkdirat 451 +#define __NR_mknodat 452 +#define __NR_fchownat 453 +#define __NR_futimesat 454 +#define __NR_fstatat64 455 +#define __NR_unlinkat 456 +#define __NR_renameat 457 +#define __NR_linkat 458 +#define __NR_symlinkat 459 +#define __NR_readlinkat 460 +#define __NR_fchmodat 461 +#define __NR_faccessat 462 +#define __NR_pselect6 463 +#define __NR_ppoll 464 +#define __NR_unshare 465 +#define __NR_set_robust_list 466 +#define __NR_get_robust_list 467 +#define __NR_splice 468 +#define __NR_sync_file_range 469 +#define __NR_tee 470 +#define __NR_vmsplice 471 +#define __NR_move_pages 472 +#define __NR_getcpu 473 +#define __NR_epoll_pwait 474 +#define __NR_utimensat 475 +#define __NR_signalfd 476 +#define __NR_timerfd 477 +#define __NR_eventfd 478 + +#ifdef __KERNEL__ + +#define NR_SYSCALLS 479 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING + +/* "Conditional" syscalls. What we want is + + __attribute__((weak,alias("sys_ni_syscall"))) + + but that raises the problem of what type to give the symbol. If we use + a prototype, it'll conflict with the definition given in this file and + others. If we use __typeof, we discover that not all symbols actually + have declarations. If we use no prototype, then we get warnings from + -Wstrict-prototypes. Ho hum. */ + +#define cond_syscall(x) asm(".weak\t" #x "\n" #x " = sys_ni_syscall") + +#endif /* __KERNEL__ */ +#endif /* _ALPHA_UNISTD_H */ diff --git a/arch/alpha/include/asm/user.h b/arch/alpha/include/asm/user.h new file mode 100644 index 000000000000..a4eb6a4ca8d1 --- /dev/null +++ b/arch/alpha/include/asm/user.h @@ -0,0 +1,53 @@ +#ifndef _ALPHA_USER_H +#define _ALPHA_USER_H + +#include <linux/sched.h> +#include <linux/ptrace.h> + +#include <asm/page.h> +#include <asm/reg.h> + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd, NOT the osf-core). The file contents + * are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ +struct user { + unsigned long regs[EF_SIZE/8+32]; /* integer and fp regs */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* _ALPHA_USER_H */ diff --git a/arch/alpha/include/asm/vga.h b/arch/alpha/include/asm/vga.h new file mode 100644 index 000000000000..c00106bac521 --- /dev/null +++ b/arch/alpha/include/asm/vga.h @@ -0,0 +1,82 @@ +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares <mj@ucw.cz> + */ + +#ifndef _LINUX_ASM_VGA_H_ +#define _LINUX_ASM_VGA_H_ + +#include <asm/io.h> + +#define VT_BUF_HAVE_RW +#define VT_BUF_HAVE_MEMSETW +#define VT_BUF_HAVE_MEMCPYW + +static inline void scr_writew(u16 val, volatile u16 *addr) +{ + if (__is_ioaddr(addr)) + __raw_writew(val, (volatile u16 __iomem *) addr); + else + *addr = val; +} + +static inline u16 scr_readw(volatile const u16 *addr) +{ + if (__is_ioaddr(addr)) + return __raw_readw((volatile const u16 __iomem *) addr); + else + return *addr; +} + +static inline void scr_memsetw(u16 *s, u16 c, unsigned int count) +{ + if (__is_ioaddr(s)) + memsetw_io((u16 __iomem *) s, c, count); + else + memsetw(s, c, count); +} + +/* Do not trust that the usage will be correct; analyze the arguments. */ +extern void scr_memcpyw(u16 *d, const u16 *s, unsigned int count); + +/* ??? These are currently only used for downloading character sets. As + such, they don't need memory barriers. Is this all they are intended + to be used for? */ +#define vga_readb(a) readb((u8 __iomem *)(a)) +#define vga_writeb(v,a) writeb(v, (u8 __iomem *)(a)) + +#ifdef CONFIG_VGA_HOSE +#include <linux/ioport.h> +#include <linux/pci.h> + +extern struct pci_controller *pci_vga_hose; + +# define __is_port_vga(a) \ + (((a) >= 0x3b0) && ((a) < 0x3e0) && \ + ((a) != 0x3b3) && ((a) != 0x3d3)) + +# define __is_mem_vga(a) \ + (((a) >= 0xa0000) && ((a) <= 0xc0000)) + +# define FIXUP_IOADDR_VGA(a) do { \ + if (pci_vga_hose && __is_port_vga(a)) \ + (a) += pci_vga_hose->io_space->start; \ + } while(0) + +# define FIXUP_MEMADDR_VGA(a) do { \ + if (pci_vga_hose && __is_mem_vga(a)) \ + (a) += pci_vga_hose->mem_space->start; \ + } while(0) + +#else /* CONFIG_VGA_HOSE */ +# define pci_vga_hose 0 +# define __is_port_vga(a) 0 +# define __is_mem_vga(a) 0 +# define FIXUP_IOADDR_VGA(a) +# define FIXUP_MEMADDR_VGA(a) +#endif /* CONFIG_VGA_HOSE */ + +#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap(x, s)) + +#endif diff --git a/arch/alpha/include/asm/xor.h b/arch/alpha/include/asm/xor.h new file mode 100644 index 000000000000..5ee1c2bc0499 --- /dev/null +++ b/arch/alpha/include/asm/xor.h @@ -0,0 +1,855 @@ +/* + * include/asm-alpha/xor.h + * + * Optimized RAID-5 checksumming functions for alpha EV5 and EV6 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * You should have received a copy of the GNU General Public License + * (for example /usr/src/linux/COPYING); if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +extern void xor_alpha_2(unsigned long, unsigned long *, unsigned long *); +extern void xor_alpha_3(unsigned long, unsigned long *, unsigned long *, + unsigned long *); +extern void xor_alpha_4(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *); +extern void xor_alpha_5(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *, unsigned long *); + +extern void xor_alpha_prefetch_2(unsigned long, unsigned long *, + unsigned long *); +extern void xor_alpha_prefetch_3(unsigned long, unsigned long *, + unsigned long *, unsigned long *); +extern void xor_alpha_prefetch_4(unsigned long, unsigned long *, + unsigned long *, unsigned long *, + unsigned long *); +extern void xor_alpha_prefetch_5(unsigned long, unsigned long *, + unsigned long *, unsigned long *, + unsigned long *, unsigned long *); + +asm(" \n\ + .text \n\ + .align 3 \n\ + .ent xor_alpha_2 \n\ +xor_alpha_2: \n\ + .prologue 0 \n\ + srl $16, 6, $16 \n\ + .align 4 \n\ +2: \n\ + ldq $0,0($17) \n\ + ldq $1,0($18) \n\ + ldq $2,8($17) \n\ + ldq $3,8($18) \n\ + \n\ + ldq $4,16($17) \n\ + ldq $5,16($18) \n\ + ldq $6,24($17) \n\ + ldq $7,24($18) \n\ + \n\ + ldq $19,32($17) \n\ + ldq $20,32($18) \n\ + ldq $21,40($17) \n\ + ldq $22,40($18) \n\ + \n\ + ldq $23,48($17) \n\ + ldq $24,48($18) \n\ + ldq $25,56($17) \n\ + xor $0,$1,$0 # 7 cycles from $1 load \n\ + \n\ + ldq $27,56($18) \n\ + xor $2,$3,$2 \n\ + stq $0,0($17) \n\ + xor $4,$5,$4 \n\ + \n\ + stq $2,8($17) \n\ + xor $6,$7,$6 \n\ + stq $4,16($17) \n\ + xor $19,$20,$19 \n\ + \n\ + stq $6,24($17) \n\ + xor $21,$22,$21 \n\ + stq $19,32($17) \n\ + xor $23,$24,$23 \n\ + \n\ + stq $21,40($17) \n\ + xor $25,$27,$25 \n\ + stq $23,48($17) \n\ + subq $16,1,$16 \n\ + \n\ + stq $25,56($17) \n\ + addq $17,64,$17 \n\ + addq $18,64,$18 \n\ + bgt $16,2b \n\ + \n\ + ret \n\ + .end xor_alpha_2 \n\ + \n\ + .align 3 \n\ + .ent xor_alpha_3 \n\ +xor_alpha_3: \n\ + .prologue 0 \n\ + srl $16, 6, $16 \n\ + .align 4 \n\ +3: \n\ + ldq $0,0($17) \n\ + ldq $1,0($18) \n\ + ldq $2,0($19) \n\ + ldq $3,8($17) \n\ + \n\ + ldq $4,8($18) \n\ + ldq $6,16($17) \n\ + ldq $7,16($18) \n\ + ldq $21,24($17) \n\ + \n\ + ldq $22,24($18) \n\ + ldq $24,32($17) \n\ + ldq $25,32($18) \n\ + ldq $5,8($19) \n\ + \n\ + ldq $20,16($19) \n\ + ldq $23,24($19) \n\ + ldq $27,32($19) \n\ + nop \n\ + \n\ + xor $0,$1,$1 # 8 cycles from $0 load \n\ + xor $3,$4,$4 # 6 cycles from $4 load \n\ + xor $6,$7,$7 # 6 cycles from $7 load \n\ + xor $21,$22,$22 # 5 cycles from $22 load \n\ + \n\ + xor $1,$2,$2 # 9 cycles from $2 load \n\ + xor $24,$25,$25 # 5 cycles from $25 load \n\ + stq $2,0($17) \n\ + xor $4,$5,$5 # 6 cycles from $5 load \n\ + \n\ + stq $5,8($17) \n\ + xor $7,$20,$20 # 7 cycles from $20 load \n\ + stq $20,16($17) \n\ + xor $22,$23,$23 # 7 cycles from $23 load \n\ + \n\ + stq $23,24($17) \n\ + xor $25,$27,$27 # 7 cycles from $27 load \n\ + stq $27,32($17) \n\ + nop \n\ + \n\ + ldq $0,40($17) \n\ + ldq $1,40($18) \n\ + ldq $3,48($17) \n\ + ldq $4,48($18) \n\ + \n\ + ldq $6,56($17) \n\ + ldq $7,56($18) \n\ + ldq $2,40($19) \n\ + ldq $5,48($19) \n\ + \n\ + ldq $20,56($19) \n\ + xor $0,$1,$1 # 4 cycles from $1 load \n\ + xor $3,$4,$4 # 5 cycles from $4 load \n\ + xor $6,$7,$7 # 5 cycles from $7 load \n\ + \n\ + xor $1,$2,$2 # 4 cycles from $2 load \n\ + xor $4,$5,$5 # 5 cycles from $5 load \n\ + stq $2,40($17) \n\ + xor $7,$20,$20 # 4 cycles from $20 load \n\ + \n\ + stq $5,48($17) \n\ + subq $16,1,$16 \n\ + stq $20,56($17) \n\ + addq $19,64,$19 \n\ + \n\ + addq $18,64,$18 \n\ + addq $17,64,$17 \n\ + bgt $16,3b \n\ + ret \n\ + .end xor_alpha_3 \n\ + \n\ + .align 3 \n\ + .ent xor_alpha_4 \n\ +xor_alpha_4: \n\ + .prologue 0 \n\ + srl $16, 6, $16 \n\ + .align 4 \n\ +4: \n\ + ldq $0,0($17) \n\ + ldq $1,0($18) \n\ + ldq $2,0($19) \n\ + ldq $3,0($20) \n\ + \n\ + ldq $4,8($17) \n\ + ldq $5,8($18) \n\ + ldq $6,8($19) \n\ + ldq $7,8($20) \n\ + \n\ + ldq $21,16($17) \n\ + ldq $22,16($18) \n\ + ldq $23,16($19) \n\ + ldq $24,16($20) \n\ + \n\ + ldq $25,24($17) \n\ + xor $0,$1,$1 # 6 cycles from $1 load \n\ + ldq $27,24($18) \n\ + xor $2,$3,$3 # 6 cycles from $3 load \n\ + \n\ + ldq $0,24($19) \n\ + xor $1,$3,$3 \n\ + ldq $1,24($20) \n\ + xor $4,$5,$5 # 7 cycles from $5 load \n\ + \n\ + stq $3,0($17) \n\ + xor $6,$7,$7 \n\ + xor $21,$22,$22 # 7 cycles from $22 load \n\ + xor $5,$7,$7 \n\ + \n\ + stq $7,8($17) \n\ + xor $23,$24,$24 # 7 cycles from $24 load \n\ + ldq $2,32($17) \n\ + xor $22,$24,$24 \n\ + \n\ + ldq $3,32($18) \n\ + ldq $4,32($19) \n\ + ldq $5,32($20) \n\ + xor $25,$27,$27 # 8 cycles from $27 load \n\ + \n\ + ldq $6,40($17) \n\ + ldq $7,40($18) \n\ + ldq $21,40($19) \n\ + ldq $22,40($20) \n\ + \n\ + stq $24,16($17) \n\ + xor $0,$1,$1 # 9 cycles from $1 load \n\ + xor $2,$3,$3 # 5 cycles from $3 load \n\ + xor $27,$1,$1 \n\ + \n\ + stq $1,24($17) \n\ + xor $4,$5,$5 # 5 cycles from $5 load \n\ + ldq $23,48($17) \n\ + ldq $24,48($18) \n\ + \n\ + ldq $25,48($19) \n\ + xor $3,$5,$5 \n\ + ldq $27,48($20) \n\ + ldq $0,56($17) \n\ + \n\ + ldq $1,56($18) \n\ + ldq $2,56($19) \n\ + xor $6,$7,$7 # 8 cycles from $6 load \n\ + ldq $3,56($20) \n\ + \n\ + stq $5,32($17) \n\ + xor $21,$22,$22 # 8 cycles from $22 load \n\ + xor $7,$22,$22 \n\ + xor $23,$24,$24 # 5 cycles from $24 load \n\ + \n\ + stq $22,40($17) \n\ + xor $25,$27,$27 # 5 cycles from $27 load \n\ + xor $24,$27,$27 \n\ + xor $0,$1,$1 # 5 cycles from $1 load \n\ + \n\ + stq $27,48($17) \n\ + xor $2,$3,$3 # 4 cycles from $3 load \n\ + xor $1,$3,$3 \n\ + subq $16,1,$16 \n\ + \n\ + stq $3,56($17) \n\ + addq $20,64,$20 \n\ + addq $19,64,$19 \n\ + addq $18,64,$18 \n\ + \n\ + addq $17,64,$17 \n\ + bgt $16,4b \n\ + ret \n\ + .end xor_alpha_4 \n\ + \n\ + .align 3 \n\ + .ent xor_alpha_5 \n\ +xor_alpha_5: \n\ + .prologue 0 \n\ + srl $16, 6, $16 \n\ + .align 4 \n\ +5: \n\ + ldq $0,0($17) \n\ + ldq $1,0($18) \n\ + ldq $2,0($19) \n\ + ldq $3,0($20) \n\ + \n\ + ldq $4,0($21) \n\ + ldq $5,8($17) \n\ + ldq $6,8($18) \n\ + ldq $7,8($19) \n\ + \n\ + ldq $22,8($20) \n\ + ldq $23,8($21) \n\ + ldq $24,16($17) \n\ + ldq $25,16($18) \n\ + \n\ + ldq $27,16($19) \n\ + xor $0,$1,$1 # 6 cycles from $1 load \n\ + ldq $28,16($20) \n\ + xor $2,$3,$3 # 6 cycles from $3 load \n\ + \n\ + ldq $0,16($21) \n\ + xor $1,$3,$3 \n\ + ldq $1,24($17) \n\ + xor $3,$4,$4 # 7 cycles from $4 load \n\ + \n\ + stq $4,0($17) \n\ + xor $5,$6,$6 # 7 cycles from $6 load \n\ + xor $7,$22,$22 # 7 cycles from $22 load \n\ + xor $6,$23,$23 # 7 cycles from $23 load \n\ + \n\ + ldq $2,24($18) \n\ + xor $22,$23,$23 \n\ + ldq $3,24($19) \n\ + xor $24,$25,$25 # 8 cycles from $25 load \n\ + \n\ + stq $23,8($17) \n\ + xor $25,$27,$27 # 8 cycles from $27 load \n\ + ldq $4,24($20) \n\ + xor $28,$0,$0 # 7 cycles from $0 load \n\ + \n\ + ldq $5,24($21) \n\ + xor $27,$0,$0 \n\ + ldq $6,32($17) \n\ + ldq $7,32($18) \n\ + \n\ + stq $0,16($17) \n\ + xor $1,$2,$2 # 6 cycles from $2 load \n\ + ldq $22,32($19) \n\ + xor $3,$4,$4 # 4 cycles from $4 load \n\ + \n\ + ldq $23,32($20) \n\ + xor $2,$4,$4 \n\ + ldq $24,32($21) \n\ + ldq $25,40($17) \n\ + \n\ + ldq $27,40($18) \n\ + ldq $28,40($19) \n\ + ldq $0,40($20) \n\ + xor $4,$5,$5 # 7 cycles from $5 load \n\ + \n\ + stq $5,24($17) \n\ + xor $6,$7,$7 # 7 cycles from $7 load \n\ + ldq $1,40($21) \n\ + ldq $2,48($17) \n\ + \n\ + ldq $3,48($18) \n\ + xor $7,$22,$22 # 7 cycles from $22 load \n\ + ldq $4,48($19) \n\ + xor $23,$24,$24 # 6 cycles from $24 load \n\ + \n\ + ldq $5,48($20) \n\ + xor $22,$24,$24 \n\ + ldq $6,48($21) \n\ + xor $25,$27,$27 # 7 cycles from $27 load \n\ + \n\ + stq $24,32($17) \n\ + xor $27,$28,$28 # 8 cycles from $28 load \n\ + ldq $7,56($17) \n\ + xor $0,$1,$1 # 6 cycles from $1 load \n\ + \n\ + ldq $22,56($18) \n\ + ldq $23,56($19) \n\ + ldq $24,56($20) \n\ + ldq $25,56($21) \n\ + \n\ + xor $28,$1,$1 \n\ + xor $2,$3,$3 # 9 cycles from $3 load \n\ + xor $3,$4,$4 # 9 cycles from $4 load \n\ + xor $5,$6,$6 # 8 cycles from $6 load \n\ + \n\ + stq $1,40($17) \n\ + xor $4,$6,$6 \n\ + xor $7,$22,$22 # 7 cycles from $22 load \n\ + xor $23,$24,$24 # 6 cycles from $24 load \n\ + \n\ + stq $6,48($17) \n\ + xor $22,$24,$24 \n\ + subq $16,1,$16 \n\ + xor $24,$25,$25 # 8 cycles from $25 load \n\ + \n\ + stq $25,56($17) \n\ + addq $21,64,$21 \n\ + addq $20,64,$20 \n\ + addq $19,64,$19 \n\ + \n\ + addq $18,64,$18 \n\ + addq $17,64,$17 \n\ + bgt $16,5b \n\ + ret \n\ + .end xor_alpha_5 \n\ + \n\ + .align 3 \n\ + .ent xor_alpha_prefetch_2 \n\ +xor_alpha_prefetch_2: \n\ + .prologue 0 \n\ + srl $16, 6, $16 \n\ + \n\ + ldq $31, 0($17) \n\ + ldq $31, 0($18) \n\ + \n\ + ldq $31, 64($17) \n\ + ldq $31, 64($18) \n\ + \n\ + ldq $31, 128($17) \n\ + ldq $31, 128($18) \n\ + \n\ + ldq $31, 192($17) \n\ + ldq $31, 192($18) \n\ + .align 4 \n\ +2: \n\ + ldq $0,0($17) \n\ + ldq $1,0($18) \n\ + ldq $2,8($17) \n\ + ldq $3,8($18) \n\ + \n\ + ldq $4,16($17) \n\ + ldq $5,16($18) \n\ + ldq $6,24($17) \n\ + ldq $7,24($18) \n\ + \n\ + ldq $19,32($17) \n\ + ldq $20,32($18) \n\ + ldq $21,40($17) \n\ + ldq $22,40($18) \n\ + \n\ + ldq $23,48($17) \n\ + ldq $24,48($18) \n\ + ldq $25,56($17) \n\ + ldq $27,56($18) \n\ + \n\ + ldq $31,256($17) \n\ + xor $0,$1,$0 # 8 cycles from $1 load \n\ + ldq $31,256($18) \n\ + xor $2,$3,$2 \n\ + \n\ + stq $0,0($17) \n\ + xor $4,$5,$4 \n\ + stq $2,8($17) \n\ + xor $6,$7,$6 \n\ + \n\ + stq $4,16($17) \n\ + xor $19,$20,$19 \n\ + stq $6,24($17) \n\ + xor $21,$22,$21 \n\ + \n\ + stq $19,32($17) \n\ + xor $23,$24,$23 \n\ + stq $21,40($17) \n\ + xor $25,$27,$25 \n\ + \n\ + stq $23,48($17) \n\ + subq $16,1,$16 \n\ + stq $25,56($17) \n\ + addq $17,64,$17 \n\ + \n\ + addq $18,64,$18 \n\ + bgt $16,2b \n\ + ret \n\ + .end xor_alpha_prefetch_2 \n\ + \n\ + .align 3 \n\ + .ent xor_alpha_prefetch_3 \n\ +xor_alpha_prefetch_3: \n\ + .prologue 0 \n\ + srl $16, 6, $16 \n\ + \n\ + ldq $31, 0($17) \n\ + ldq $31, 0($18) \n\ + ldq $31, 0($19) \n\ + \n\ + ldq $31, 64($17) \n\ + ldq $31, 64($18) \n\ + ldq $31, 64($19) \n\ + \n\ + ldq $31, 128($17) \n\ + ldq $31, 128($18) \n\ + ldq $31, 128($19) \n\ + \n\ + ldq $31, 192($17) \n\ + ldq $31, 192($18) \n\ + ldq $31, 192($19) \n\ + .align 4 \n\ +3: \n\ + ldq $0,0($17) \n\ + ldq $1,0($18) \n\ + ldq $2,0($19) \n\ + ldq $3,8($17) \n\ + \n\ + ldq $4,8($18) \n\ + ldq $6,16($17) \n\ + ldq $7,16($18) \n\ + ldq $21,24($17) \n\ + \n\ + ldq $22,24($18) \n\ + ldq $24,32($17) \n\ + ldq $25,32($18) \n\ + ldq $5,8($19) \n\ + \n\ + ldq $20,16($19) \n\ + ldq $23,24($19) \n\ + ldq $27,32($19) \n\ + nop \n\ + \n\ + xor $0,$1,$1 # 8 cycles from $0 load \n\ + xor $3,$4,$4 # 7 cycles from $4 load \n\ + xor $6,$7,$7 # 6 cycles from $7 load \n\ + xor $21,$22,$22 # 5 cycles from $22 load \n\ + \n\ + xor $1,$2,$2 # 9 cycles from $2 load \n\ + xor $24,$25,$25 # 5 cycles from $25 load \n\ + stq $2,0($17) \n\ + xor $4,$5,$5 # 6 cycles from $5 load \n\ + \n\ + stq $5,8($17) \n\ + xor $7,$20,$20 # 7 cycles from $20 load \n\ + stq $20,16($17) \n\ + xor $22,$23,$23 # 7 cycles from $23 load \n\ + \n\ + stq $23,24($17) \n\ + xor $25,$27,$27 # 7 cycles from $27 load \n\ + stq $27,32($17) \n\ + nop \n\ + \n\ + ldq $0,40($17) \n\ + ldq $1,40($18) \n\ + ldq $3,48($17) \n\ + ldq $4,48($18) \n\ + \n\ + ldq $6,56($17) \n\ + ldq $7,56($18) \n\ + ldq $2,40($19) \n\ + ldq $5,48($19) \n\ + \n\ + ldq $20,56($19) \n\ + ldq $31,256($17) \n\ + ldq $31,256($18) \n\ + ldq $31,256($19) \n\ + \n\ + xor $0,$1,$1 # 6 cycles from $1 load \n\ + xor $3,$4,$4 # 5 cycles from $4 load \n\ + xor $6,$7,$7 # 5 cycles from $7 load \n\ + xor $1,$2,$2 # 4 cycles from $2 load \n\ + \n\ + xor $4,$5,$5 # 5 cycles from $5 load \n\ + xor $7,$20,$20 # 4 cycles from $20 load \n\ + stq $2,40($17) \n\ + subq $16,1,$16 \n\ + \n\ + stq $5,48($17) \n\ + addq $19,64,$19 \n\ + stq $20,56($17) \n\ + addq $18,64,$18 \n\ + \n\ + addq $17,64,$17 \n\ + bgt $16,3b \n\ + ret \n\ + .end xor_alpha_prefetch_3 \n\ + \n\ + .align 3 \n\ + .ent xor_alpha_prefetch_4 \n\ +xor_alpha_prefetch_4: \n\ + .prologue 0 \n\ + srl $16, 6, $16 \n\ + \n\ + ldq $31, 0($17) \n\ + ldq $31, 0($18) \n\ + ldq $31, 0($19) \n\ + ldq $31, 0($20) \n\ + \n\ + ldq $31, 64($17) \n\ + ldq $31, 64($18) \n\ + ldq $31, 64($19) \n\ + ldq $31, 64($20) \n\ + \n\ + ldq $31, 128($17) \n\ + ldq $31, 128($18) \n\ + ldq $31, 128($19) \n\ + ldq $31, 128($20) \n\ + \n\ + ldq $31, 192($17) \n\ + ldq $31, 192($18) \n\ + ldq $31, 192($19) \n\ + ldq $31, 192($20) \n\ + .align 4 \n\ +4: \n\ + ldq $0,0($17) \n\ + ldq $1,0($18) \n\ + ldq $2,0($19) \n\ + ldq $3,0($20) \n\ + \n\ + ldq $4,8($17) \n\ + ldq $5,8($18) \n\ + ldq $6,8($19) \n\ + ldq $7,8($20) \n\ + \n\ + ldq $21,16($17) \n\ + ldq $22,16($18) \n\ + ldq $23,16($19) \n\ + ldq $24,16($20) \n\ + \n\ + ldq $25,24($17) \n\ + xor $0,$1,$1 # 6 cycles from $1 load \n\ + ldq $27,24($18) \n\ + xor $2,$3,$3 # 6 cycles from $3 load \n\ + \n\ + ldq $0,24($19) \n\ + xor $1,$3,$3 \n\ + ldq $1,24($20) \n\ + xor $4,$5,$5 # 7 cycles from $5 load \n\ + \n\ + stq $3,0($17) \n\ + xor $6,$7,$7 \n\ + xor $21,$22,$22 # 7 cycles from $22 load \n\ + xor $5,$7,$7 \n\ + \n\ + stq $7,8($17) \n\ + xor $23,$24,$24 # 7 cycles from $24 load \n\ + ldq $2,32($17) \n\ + xor $22,$24,$24 \n\ + \n\ + ldq $3,32($18) \n\ + ldq $4,32($19) \n\ + ldq $5,32($20) \n\ + xor $25,$27,$27 # 8 cycles from $27 load \n\ + \n\ + ldq $6,40($17) \n\ + ldq $7,40($18) \n\ + ldq $21,40($19) \n\ + ldq $22,40($20) \n\ + \n\ + stq $24,16($17) \n\ + xor $0,$1,$1 # 9 cycles from $1 load \n\ + xor $2,$3,$3 # 5 cycles from $3 load \n\ + xor $27,$1,$1 \n\ + \n\ + stq $1,24($17) \n\ + xor $4,$5,$5 # 5 cycles from $5 load \n\ + ldq $23,48($17) \n\ + xor $3,$5,$5 \n\ + \n\ + ldq $24,48($18) \n\ + ldq $25,48($19) \n\ + ldq $27,48($20) \n\ + ldq $0,56($17) \n\ + \n\ + ldq $1,56($18) \n\ + ldq $2,56($19) \n\ + ldq $3,56($20) \n\ + xor $6,$7,$7 # 8 cycles from $6 load \n\ + \n\ + ldq $31,256($17) \n\ + xor $21,$22,$22 # 8 cycles from $22 load \n\ + ldq $31,256($18) \n\ + xor $7,$22,$22 \n\ + \n\ + ldq $31,256($19) \n\ + xor $23,$24,$24 # 6 cycles from $24 load \n\ + ldq $31,256($20) \n\ + xor $25,$27,$27 # 6 cycles from $27 load \n\ + \n\ + stq $5,32($17) \n\ + xor $24,$27,$27 \n\ + xor $0,$1,$1 # 7 cycles from $1 load \n\ + xor $2,$3,$3 # 6 cycles from $3 load \n\ + \n\ + stq $22,40($17) \n\ + xor $1,$3,$3 \n\ + stq $27,48($17) \n\ + subq $16,1,$16 \n\ + \n\ + stq $3,56($17) \n\ + addq $20,64,$20 \n\ + addq $19,64,$19 \n\ + addq $18,64,$18 \n\ + \n\ + addq $17,64,$17 \n\ + bgt $16,4b \n\ + ret \n\ + .end xor_alpha_prefetch_4 \n\ + \n\ + .align 3 \n\ + .ent xor_alpha_prefetch_5 \n\ +xor_alpha_prefetch_5: \n\ + .prologue 0 \n\ + srl $16, 6, $16 \n\ + \n\ + ldq $31, 0($17) \n\ + ldq $31, 0($18) \n\ + ldq $31, 0($19) \n\ + ldq $31, 0($20) \n\ + ldq $31, 0($21) \n\ + \n\ + ldq $31, 64($17) \n\ + ldq $31, 64($18) \n\ + ldq $31, 64($19) \n\ + ldq $31, 64($20) \n\ + ldq $31, 64($21) \n\ + \n\ + ldq $31, 128($17) \n\ + ldq $31, 128($18) \n\ + ldq $31, 128($19) \n\ + ldq $31, 128($20) \n\ + ldq $31, 128($21) \n\ + \n\ + ldq $31, 192($17) \n\ + ldq $31, 192($18) \n\ + ldq $31, 192($19) \n\ + ldq $31, 192($20) \n\ + ldq $31, 192($21) \n\ + .align 4 \n\ +5: \n\ + ldq $0,0($17) \n\ + ldq $1,0($18) \n\ + ldq $2,0($19) \n\ + ldq $3,0($20) \n\ + \n\ + ldq $4,0($21) \n\ + ldq $5,8($17) \n\ + ldq $6,8($18) \n\ + ldq $7,8($19) \n\ + \n\ + ldq $22,8($20) \n\ + ldq $23,8($21) \n\ + ldq $24,16($17) \n\ + ldq $25,16($18) \n\ + \n\ + ldq $27,16($19) \n\ + xor $0,$1,$1 # 6 cycles from $1 load \n\ + ldq $28,16($20) \n\ + xor $2,$3,$3 # 6 cycles from $3 load \n\ + \n\ + ldq $0,16($21) \n\ + xor $1,$3,$3 \n\ + ldq $1,24($17) \n\ + xor $3,$4,$4 # 7 cycles from $4 load \n\ + \n\ + stq $4,0($17) \n\ + xor $5,$6,$6 # 7 cycles from $6 load \n\ + xor $7,$22,$22 # 7 cycles from $22 load \n\ + xor $6,$23,$23 # 7 cycles from $23 load \n\ + \n\ + ldq $2,24($18) \n\ + xor $22,$23,$23 \n\ + ldq $3,24($19) \n\ + xor $24,$25,$25 # 8 cycles from $25 load \n\ + \n\ + stq $23,8($17) \n\ + xor $25,$27,$27 # 8 cycles from $27 load \n\ + ldq $4,24($20) \n\ + xor $28,$0,$0 # 7 cycles from $0 load \n\ + \n\ + ldq $5,24($21) \n\ + xor $27,$0,$0 \n\ + ldq $6,32($17) \n\ + ldq $7,32($18) \n\ + \n\ + stq $0,16($17) \n\ + xor $1,$2,$2 # 6 cycles from $2 load \n\ + ldq $22,32($19) \n\ + xor $3,$4,$4 # 4 cycles from $4 load \n\ + \n\ + ldq $23,32($20) \n\ + xor $2,$4,$4 \n\ + ldq $24,32($21) \n\ + ldq $25,40($17) \n\ + \n\ + ldq $27,40($18) \n\ + ldq $28,40($19) \n\ + ldq $0,40($20) \n\ + xor $4,$5,$5 # 7 cycles from $5 load \n\ + \n\ + stq $5,24($17) \n\ + xor $6,$7,$7 # 7 cycles from $7 load \n\ + ldq $1,40($21) \n\ + ldq $2,48($17) \n\ + \n\ + ldq $3,48($18) \n\ + xor $7,$22,$22 # 7 cycles from $22 load \n\ + ldq $4,48($19) \n\ + xor $23,$24,$24 # 6 cycles from $24 load \n\ + \n\ + ldq $5,48($20) \n\ + xor $22,$24,$24 \n\ + ldq $6,48($21) \n\ + xor $25,$27,$27 # 7 cycles from $27 load \n\ + \n\ + stq $24,32($17) \n\ + xor $27,$28,$28 # 8 cycles from $28 load \n\ + ldq $7,56($17) \n\ + xor $0,$1,$1 # 6 cycles from $1 load \n\ + \n\ + ldq $22,56($18) \n\ + ldq $23,56($19) \n\ + ldq $24,56($20) \n\ + ldq $25,56($21) \n\ + \n\ + ldq $31,256($17) \n\ + xor $28,$1,$1 \n\ + ldq $31,256($18) \n\ + xor $2,$3,$3 # 9 cycles from $3 load \n\ + \n\ + ldq $31,256($19) \n\ + xor $3,$4,$4 # 9 cycles from $4 load \n\ + ldq $31,256($20) \n\ + xor $5,$6,$6 # 8 cycles from $6 load \n\ + \n\ + stq $1,40($17) \n\ + xor $4,$6,$6 \n\ + xor $7,$22,$22 # 7 cycles from $22 load \n\ + xor $23,$24,$24 # 6 cycles from $24 load \n\ + \n\ + stq $6,48($17) \n\ + xor $22,$24,$24 \n\ + ldq $31,256($21) \n\ + xor $24,$25,$25 # 8 cycles from $25 load \n\ + \n\ + stq $25,56($17) \n\ + subq $16,1,$16 \n\ + addq $21,64,$21 \n\ + addq $20,64,$20 \n\ + \n\ + addq $19,64,$19 \n\ + addq $18,64,$18 \n\ + addq $17,64,$17 \n\ + bgt $16,5b \n\ + \n\ + ret \n\ + .end xor_alpha_prefetch_5 \n\ +"); + +static struct xor_block_template xor_block_alpha = { + .name = "alpha", + .do_2 = xor_alpha_2, + .do_3 = xor_alpha_3, + .do_4 = xor_alpha_4, + .do_5 = xor_alpha_5, +}; + +static struct xor_block_template xor_block_alpha_prefetch = { + .name = "alpha prefetch", + .do_2 = xor_alpha_prefetch_2, + .do_3 = xor_alpha_prefetch_3, + .do_4 = xor_alpha_prefetch_4, + .do_5 = xor_alpha_prefetch_5, +}; + +/* For grins, also test the generic routines. */ +#include <asm-generic/xor.h> + +#undef XOR_TRY_TEMPLATES +#define XOR_TRY_TEMPLATES \ + do { \ + xor_speed(&xor_block_8regs); \ + xor_speed(&xor_block_32regs); \ + xor_speed(&xor_block_alpha); \ + xor_speed(&xor_block_alpha_prefetch); \ + } while (0) + +/* Force the use of alpha_prefetch if EV6, as it is significantly + faster in the cold cache case. */ +#define XOR_SELECT_TEMPLATE(FASTEST) \ + (implver() == IMPLVER_EV6 ? &xor_block_alpha_prefetch : FASTEST) diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h index c8986bb99ed5..df15a0dc228e 100644 --- a/arch/arm/include/asm/kexec.h +++ b/arch/arm/include/asm/kexec.h @@ -10,7 +10,7 @@ /* Maximum address we can use for the control code buffer */ #define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) -#define KEXEC_CONTROL_CODE_SIZE 4096 +#define KEXEC_CONTROL_PAGE_SIZE 4096 #define KEXEC_ARCH KEXEC_ARCH_ARM diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index db8f54a3451f..fae5beb3c3d6 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -71,7 +71,7 @@ void machine_kexec(struct kimage *image) flush_icache_range((unsigned long) reboot_code_buffer, - (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE); + (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); cpu_proc_fin(); diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 1607c941d95f..10ef464d6be7 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -317,7 +317,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, printk(error, 6, status); return -ENODEV; } - data->multipoint = 1; tusb_device.dev.platform_data = data; /* REVISIT let the driver know what DMA channels work */ diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index 5b46433d53a5..c9e1f0b47fd3 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -39,20 +39,6 @@ core-y += arch/avr32/mm/ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ libs-y += arch/avr32/lib/ -archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap - -include/asm-avr32/.arch: $(wildcard include/config/platform/*.h) include/config/auto.conf - @echo ' SYMLINK include/asm-avr32/arch -> include/asm-avr32/$(archincdir-y)' -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-avr32 - $(Q)ln -fsn $(srctree)/include/asm-avr32/$(archincdir-y) include/asm-avr32/arch -else - $(Q)ln -fsn $(archincdir-y) include/asm-avr32/arch -endif - @touch $@ - -archprepare: include/asm-avr32/.arch - CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 670c87b2db12..b8286f1ce854 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -47,7 +47,7 @@ static struct eth_platform_data __initdata eth_data[2]; static struct spi_board_info spi0_board_info[] __initdata = { { .modalias = "mtd_dataflash", - .max_speed_hz = 10000000, + .max_speed_hz = 8000000, .chip_select = 0, }, }; diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index b33542b97563..ee4c292683e1 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -96,7 +96,7 @@ static struct mtd_partition *nand_part_info(int size, int *num_partitions) return nand_partitions; } -struct atmel_nand_data atstk1006_nand_data __initdata = { +static struct atmel_nand_data atstk1006_nand_data __initdata = { .cle = 21, .ale = 22, .rdy_pin = GPIO_PIN_PB(30), diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig index 119edb839ac3..541520912c55 100644 --- a/arch/avr32/configs/atngw100_defconfig +++ b/arch/avr32/configs/atngw100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Mon May 26 13:30:59 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 16:00:47 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y @@ -78,10 +78,16 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -98,6 +104,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,6 +149,7 @@ CONFIG_PHYS_OFFSET=0x10000000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_QUICKLIST=y # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set # CONFIG_NEED_NODE_MEMMAP_SIZE is not set @@ -160,6 +168,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set CONFIG_NMI_DEBUGGING=y @@ -174,6 +183,12 @@ CONFIG_CMDLINE="" # # Power management options # +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # CPU Frequency scaling @@ -205,10 +220,6 @@ CONFIG_CPU_FREQ_AT32AP=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -222,6 +233,7 @@ CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -339,8 +351,10 @@ CONFIG_IP6_NF_MANGLE=m # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set @@ -499,7 +513,6 @@ CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -607,21 +620,35 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_GPIO=m # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +CONFIG_AT24=m # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -646,27 +673,32 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -685,6 +717,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -716,10 +749,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set @@ -740,7 +769,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_USB_ATMEL_USBA=y # CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set @@ -759,21 +788,24 @@ CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set -CONFIG_MMC=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # # MMC/SD Card Drivers # -CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set -# CONFIG_MMC_TEST is not set +CONFIG_MMC_TEST=m # # MMC/SD Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_ATMELMCI=y CONFIG_MMC_SPI=m # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -783,6 +815,7 @@ CONFIG_LEDS_CLASS=y # LED drivers # CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -821,10 +854,13 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -844,6 +880,19 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_AT32AP700X=y +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_DW_DMAC=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +CONFIG_DMATEST=m # CONFIG_UIO is not set # @@ -921,6 +970,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -931,17 +981,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1017,6 +1066,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1037,6 +1088,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -1101,6 +1153,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1141,12 +1197,14 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y CONFIG_CRC7=m # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_GENERIC_ALLOCATOR=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index c6d02eac8791..69fce6b6a783 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Mon May 26 13:30:20 2008 +# Linux kernel version: 2.6.27-rc1 +# Mon Aug 4 16:02:27 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y @@ -77,10 +77,16 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -91,12 +97,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -130,6 +137,7 @@ CONFIG_BOARD_ATSTK1000=y CONFIG_BOARD_ATSTK1002=y # CONFIG_BOARD_ATSTK1003 is not set # CONFIG_BOARD_ATSTK1004 is not set +# CONFIG_BOARD_ATSTK1006 is not set # CONFIG_BOARD_ATSTK100X_CUSTOM is not set # CONFIG_BOARD_ATSTK100X_SPI1 is not set # CONFIG_BOARD_ATSTK1000_J2_LED is not set @@ -150,6 +158,7 @@ CONFIG_PHYS_OFFSET=0x10000000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_QUICKLIST=y # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set # CONFIG_NEED_NODE_MEMMAP_SIZE is not set @@ -168,6 +177,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set CONFIG_NMI_DEBUGGING=y @@ -182,6 +192,12 @@ CONFIG_CMDLINE="" # # Power management options # +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # CPU Frequency scaling @@ -213,10 +229,6 @@ CONFIG_CPU_FREQ_AT32AP=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -230,6 +242,7 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -284,6 +297,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=m CONFIG_BRIDGE=m # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -474,6 +488,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_PMP is not set @@ -483,7 +498,6 @@ CONFIG_PATA_AT32=m # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -625,21 +639,35 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_GPIO=m # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +CONFIG_AT24=m # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -664,27 +692,32 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -703,6 +736,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -754,6 +788,9 @@ CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_LTV350QV=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set # CONFIG_BACKLIGHT_CLASS_DEVICE is not set # @@ -761,15 +798,7 @@ CONFIG_LCD_LTV350QV=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -783,37 +812,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# SPI devices -# +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_SPI=y CONFIG_SND_AT73C213=m CONFIG_SND_AT73C213_TARGET_BITRATE=48000 - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y @@ -836,7 +839,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_USB_ATMEL_USBA=y # CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set @@ -855,21 +858,24 @@ CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set -CONFIG_MMC=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # # MMC/SD Card Drivers # -CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set -CONFIG_MMC_TEST=m +# CONFIG_MMC_TEST is not set # # MMC/SD Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_ATMELMCI=y CONFIG_MMC_SPI=m # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -879,7 +885,9 @@ CONFIG_LEDS_CLASS=m # LED drivers # CONFIG_LEDS_ATMEL_PWM=m +# CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=m +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -918,10 +926,13 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -941,18 +952,31 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_AT32AP700X=y +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_DW_DMAC=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +CONFIG_DMATEST=m # CONFIG_UIO is not set # # File systems # -CONFIG_EXT2_FS=m +CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m +CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m +CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1018,6 +1042,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1028,13 +1053,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1104,6 +1128,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1124,6 +1150,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -1188,6 +1215,10 @@ CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1228,12 +1259,14 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y CONFIG_CRC7=m # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_GENERIC_ALLOCATOR=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig index 5a4ae6b5d28f..5477ed3183b4 100644 --- a/arch/avr32/configs/atstk1003_defconfig +++ b/arch/avr32/configs/atstk1003_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Mon May 26 13:33:05 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 15:34:44 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y @@ -80,10 +80,16 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 @@ -93,12 +99,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -132,6 +139,7 @@ CONFIG_BOARD_ATSTK1000=y # CONFIG_BOARD_ATSTK1002 is not set CONFIG_BOARD_ATSTK1003=y # CONFIG_BOARD_ATSTK1004 is not set +# CONFIG_BOARD_ATSTK1006 is not set # CONFIG_BOARD_ATSTK100X_CUSTOM is not set # CONFIG_BOARD_ATSTK100X_SPI1 is not set # CONFIG_BOARD_ATSTK1000_J2_LED is not set @@ -152,6 +160,7 @@ CONFIG_PHYS_OFFSET=0x10000000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_QUICKLIST=y # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set # CONFIG_NEED_NODE_MEMMAP_SIZE is not set @@ -170,6 +179,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set CONFIG_NMI_DEBUGGING=y @@ -184,6 +194,12 @@ CONFIG_CMDLINE="" # # Power management options # +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # CPU Frequency scaling @@ -215,10 +231,6 @@ CONFIG_CPU_FREQ_AT32AP=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -449,6 +461,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_PMP is not set @@ -458,7 +471,6 @@ CONFIG_PATA_AT32=m # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -575,21 +587,35 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_GPIO=m # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +CONFIG_AT24=m # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -614,27 +640,32 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -653,6 +684,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -684,15 +716,7 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -706,37 +730,11 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# SPI devices -# +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_SPI=y CONFIG_SND_AT73C213=m CONFIG_SND_AT73C213_TARGET_BITRATE=48000 - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y @@ -759,7 +757,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_USB_ATMEL_USBA=y # CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set @@ -778,21 +776,24 @@ CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set -CONFIG_MMC=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # # MMC/SD Card Drivers # -CONFIG_MMC_BLOCK=m -# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set -# CONFIG_MMC_TEST is not set +CONFIG_MMC_TEST=m # # MMC/SD Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_ATMELMCI=y CONFIG_MMC_SPI=m # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -802,7 +803,9 @@ CONFIG_LEDS_CLASS=y # LED drivers # CONFIG_LEDS_ATMEL_PWM=m +# CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -841,10 +844,13 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -864,8 +870,20 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_AT32AP700X=y -CONFIG_UIO=m -# CONFIG_UIO_SMX is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_DW_DMAC=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +CONFIG_DMATEST=m +# CONFIG_UIO is not set # # File systems @@ -943,6 +961,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1011,6 +1030,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1029,6 +1050,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -1056,6 +1078,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y CONFIG_CRC7=m @@ -1063,6 +1086,7 @@ CONFIG_CRC7=m CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_GENERIC_ALLOCATOR=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig index a0912fb7c92e..69e6c0d08ce8 100644 --- a/arch/avr32/configs/atstk1004_defconfig +++ b/arch/avr32/configs/atstk1004_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Mon May 26 13:34:57 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 15:38:56 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y @@ -69,10 +69,16 @@ CONFIG_SLOB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y # CONFIG_PROC_PAGE_MONITOR is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set @@ -97,6 +103,7 @@ CONFIG_BOARD_ATSTK1000=y # CONFIG_BOARD_ATSTK1002 is not set # CONFIG_BOARD_ATSTK1003 is not set CONFIG_BOARD_ATSTK1004=y +# CONFIG_BOARD_ATSTK1006 is not set # CONFIG_BOARD_ATSTK100X_CUSTOM is not set # CONFIG_BOARD_ATSTK100X_SPI1 is not set # CONFIG_BOARD_ATSTK1000_J2_LED is not set @@ -115,6 +122,7 @@ CONFIG_PHYS_OFFSET=0x10000000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_QUICKLIST=y # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set # CONFIG_NEED_NODE_MEMMAP_SIZE is not set @@ -133,6 +141,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set # CONFIG_NMI_DEBUGGING is not set @@ -147,6 +156,8 @@ CONFIG_CMDLINE="" # # Power management options # +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # CPU Frequency scaling @@ -164,10 +175,6 @@ CONFIG_CMDLINE="" # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -390,24 +397,28 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# I2C GPIO expanders: # # -# I2C GPIO expanders: +# PCI GPIO expanders: # # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -426,6 +437,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -477,6 +489,9 @@ CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_LTV350QV=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set # CONFIG_BACKLIGHT_CLASS_DEVICE is not set # @@ -484,10 +499,6 @@ CONFIG_LCD_LTV350QV=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set @@ -507,7 +518,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_USB_ATMEL_USBA=y # CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set @@ -525,6 +536,7 @@ CONFIG_USB_ETH=y # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -547,6 +559,8 @@ CONFIG_RTC_INTF_DEV=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -566,6 +580,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_AT32AP700X=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -620,6 +635,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # @@ -638,12 +654,14 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig new file mode 100644 index 000000000000..8b6e54c9946a --- /dev/null +++ b/arch/avr32/configs/atstk1006_defconfig @@ -0,0 +1,1304 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 15:40:26 2008 +# +CONFIG_AVR32=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System Type and features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SUBARCH_AVR32B=y +CONFIG_MMU=y +CONFIG_PERFORMANCE_COUNTERS=y +CONFIG_PLATFORM_AT32AP=y +CONFIG_CPU_AT32AP700X=y +CONFIG_CPU_AT32AP7000=y +CONFIG_BOARD_ATSTK1000=y +# CONFIG_BOARD_ATNGW100 is not set +# CONFIG_BOARD_ATSTK1002 is not set +# CONFIG_BOARD_ATSTK1003 is not set +# CONFIG_BOARD_ATSTK1004 is not set +CONFIG_BOARD_ATSTK1006=y +# CONFIG_BOARD_ATSTK100X_CUSTOM is not set +# CONFIG_BOARD_ATSTK100X_SPI1 is not set +# CONFIG_BOARD_ATSTK1000_J2_LED is not set +# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set +# CONFIG_BOARD_ATSTK1000_J2_RGB is not set +CONFIG_BOARD_ATSTK1000_EXTDAC=y +CONFIG_LOADER_U_BOOT=y + +# +# Atmel AVR32 AP options +# +# CONFIG_AP700X_32_BIT_SMC is not set +CONFIG_AP700X_16_BIT_SMC=y +# CONFIG_AP700X_8_BIT_SMC is not set +CONFIG_LOAD_ADDRESS=0x10000000 +CONFIG_ENTRY_ADDRESS=0x90000000 +CONFIG_PHYS_OFFSET=0x10000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_QUICKLIST=y +# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set +# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set +# CONFIG_NEED_NODE_MEMMAP_SIZE is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_SPARSEMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_VIRT_TO_BUS=y +# CONFIG_OWNERSHIP_TRACE is not set +CONFIG_NMI_DEBUGGING=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_CMDLINE="" + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_AT32AP=y + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=m +CONFIG_BRIDGE=m +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=m +CONFIG_MTD_M25P80=m +CONFIG_M25PXX_USE_FAST_READ=y +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_HW=y +# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=m +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=m +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HAVE_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_PMP is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +CONFIG_PATA_AT32=m +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +CONFIG_MACB=y +# CONFIG_ENC28J60 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=m +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=m + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=m +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +CONFIG_MOUSE_GPIO=m +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_ALGOBIT=m + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=m +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT32AP700X_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_LTV350QV=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_SPI=y +CONFIG_SND_AT73C213=m +CONFIG_SND_AT73C213_TARGET_BITRATE=48000 +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +CONFIG_USB_GADGET_ATMEL_USBA=y +CONFIG_USB_ATMEL_USBA=y +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +CONFIG_LEDS_ATMEL_PWM=m +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=m +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT32AP700X=y +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_DW_DMAC=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +CONFIG_DMATEST=m +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_WRITEBUFFER is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_XATTR=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_LKDTM is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=m +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +CONFIG_CRC7=m +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile index d5018e2eed25..514c9a9b009a 100644 --- a/arch/avr32/mach-at32ap/Makefile +++ b/arch/avr32/mach-at32ap/Makefile @@ -1,4 +1,5 @@ obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o +obj-y += hmatrix.o obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 92bfb4d8ae45..e01dbe4ebb40 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -22,13 +22,13 @@ #include <mach/at32ap700x.h> #include <mach/board.h> +#include <mach/hmatrix.h> #include <mach/portmux.h> #include <mach/sram.h> #include <video/atmel_lcdc.h> #include "clock.h" -#include "hmatrix.h" #include "pio.h" #include "pm.h" @@ -725,7 +725,7 @@ static struct clk pico_clk = { * HMATRIX * -------------------------------------------------------------------- */ -static struct clk hmatrix_clk = { +struct clk at32_hmatrix_clk = { .name = "hmatrix_clk", .parent = &pbb_clk, .mode = pbb_clk_mode, @@ -733,12 +733,6 @@ static struct clk hmatrix_clk = { .index = 2, .users = 1, }; -#define HMATRIX_BASE ((void __iomem *)0xfff00800) - -#define hmatrix_readl(reg) \ - __raw_readl((HMATRIX_BASE) + HMATRIX_##reg) -#define hmatrix_writel(reg,value) \ - __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg) /* * Set bits in the HMATRIX Special Function Register (SFR) used by the @@ -748,13 +742,7 @@ static struct clk hmatrix_clk = { */ static inline void set_ebi_sfr_bits(u32 mask) { - u32 sfr; - - clk_enable(&hmatrix_clk); - sfr = hmatrix_readl(SFR4); - sfr |= mask; - hmatrix_writel(SFR4, sfr); - clk_disable(&hmatrix_clk); + hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, mask); } /* -------------------------------------------------------------------- @@ -1779,7 +1767,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev, return ret; select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */ - set_ebi_sfr_bits(HMATRIX_BIT(CS4A)); + hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE); break; case 5: ret = platform_device_add_resources(pdev, @@ -1789,7 +1777,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev, return ret; select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */ - set_ebi_sfr_bits(HMATRIX_BIT(CS5A)); + hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE); break; default: return -EINVAL; @@ -1905,7 +1893,7 @@ at32_add_device_nand(unsigned int id, struct atmel_nand_data *data) sizeof(struct atmel_nand_data))) goto fail; - set_ebi_sfr_bits(HMATRIX_BIT(CS3A)); + hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE); if (data->enable_pin) at32_select_gpio(data->enable_pin, AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); @@ -2097,7 +2085,7 @@ struct clk *at32_clock_list[] = { &pbb_clk, &at32_pm_pclk, &at32_intc0_pclk, - &hmatrix_clk, + &at32_hmatrix_clk, &ebi_clk, &hramc_clk, &sdramc_clk, diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c index 4642117cc9ab..6c27ddac5adf 100644 --- a/arch/avr32/mach-at32ap/clock.c +++ b/arch/avr32/mach-at32ap/clock.c @@ -16,6 +16,8 @@ #include <linux/device.h> #include <linux/string.h> +#include <mach/chip.h> + #include "clock.h" static DEFINE_SPINLOCK(clk_lock); diff --git a/arch/avr32/mach-at32ap/hmatrix.c b/arch/avr32/mach-at32ap/hmatrix.c new file mode 100644 index 000000000000..48f5ede77468 --- /dev/null +++ b/arch/avr32/mach-at32ap/hmatrix.c @@ -0,0 +1,88 @@ +/* + * High-Speed Bus Matrix helper functions + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/io.h> + +#include <mach/chip.h> +#include <mach/hmatrix.h> + +static inline void __hmatrix_write_reg(unsigned long offset, u32 value) +{ + __raw_writel(value, (void __iomem __force *)(HMATRIX_BASE + offset)); +} + +static inline u32 __hmatrix_read_reg(unsigned long offset) +{ + return __raw_readl((void __iomem __force *)(HMATRIX_BASE + offset)); +} + +/** + * hmatrix_write_reg - write HMATRIX configuration register + * @offset: register offset + * @value: value to be written to the register at @offset + */ +void hmatrix_write_reg(unsigned long offset, u32 value) +{ + clk_enable(&at32_hmatrix_clk); + __hmatrix_write_reg(offset, value); + __hmatrix_read_reg(offset); + clk_disable(&at32_hmatrix_clk); +} + +/** + * hmatrix_read_reg - read HMATRIX configuration register + * @offset: register offset + * + * Returns the value of the register at @offset. + */ +u32 hmatrix_read_reg(unsigned long offset) +{ + u32 value; + + clk_enable(&at32_hmatrix_clk); + value = __hmatrix_read_reg(offset); + clk_disable(&at32_hmatrix_clk); + + return value; +} + +/** + * hmatrix_sfr_set_bits - set bits in a slave's Special Function Register + * @slave_id: operate on the SFR belonging to this slave + * @mask: mask of bits to be set in the SFR + */ +void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask) +{ + u32 value; + + clk_enable(&at32_hmatrix_clk); + value = __hmatrix_read_reg(HMATRIX_SFR(slave_id)); + value |= mask; + __hmatrix_write_reg(HMATRIX_SFR(slave_id), value); + __hmatrix_read_reg(HMATRIX_SFR(slave_id)); + clk_disable(&at32_hmatrix_clk); +} + +/** + * hmatrix_sfr_set_bits - clear bits in a slave's Special Function Register + * @slave_id: operate on the SFR belonging to this slave + * @mask: mask of bits to be cleared in the SFR + */ +void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask) +{ + u32 value; + + clk_enable(&at32_hmatrix_clk); + value = __hmatrix_read_reg(HMATRIX_SFR(slave_id)); + value &= ~mask; + __hmatrix_write_reg(HMATRIX_SFR(slave_id), value); + __hmatrix_read_reg(HMATRIX_SFR(slave_id)); + clk_disable(&at32_hmatrix_clk); +} diff --git a/arch/avr32/mach-at32ap/hmatrix.h b/arch/avr32/mach-at32ap/hmatrix.h deleted file mode 100644 index d10bfb60d68d..000000000000 --- a/arch/avr32/mach-at32ap/hmatrix.h +++ /dev/null @@ -1,182 +0,0 @@ -/* - * Register definitions for High-Speed Bus Matrix - */ -#ifndef __HMATRIX_H -#define __HMATRIX_H - -/* HMATRIX register offsets */ -#define HMATRIX_MCFG0 0x0000 -#define HMATRIX_MCFG1 0x0004 -#define HMATRIX_MCFG2 0x0008 -#define HMATRIX_MCFG3 0x000c -#define HMATRIX_MCFG4 0x0010 -#define HMATRIX_MCFG5 0x0014 -#define HMATRIX_MCFG6 0x0018 -#define HMATRIX_MCFG7 0x001c -#define HMATRIX_MCFG8 0x0020 -#define HMATRIX_MCFG9 0x0024 -#define HMATRIX_MCFG10 0x0028 -#define HMATRIX_MCFG11 0x002c -#define HMATRIX_MCFG12 0x0030 -#define HMATRIX_MCFG13 0x0034 -#define HMATRIX_MCFG14 0x0038 -#define HMATRIX_MCFG15 0x003c -#define HMATRIX_SCFG0 0x0040 -#define HMATRIX_SCFG1 0x0044 -#define HMATRIX_SCFG2 0x0048 -#define HMATRIX_SCFG3 0x004c -#define HMATRIX_SCFG4 0x0050 -#define HMATRIX_SCFG5 0x0054 -#define HMATRIX_SCFG6 0x0058 -#define HMATRIX_SCFG7 0x005c -#define HMATRIX_SCFG8 0x0060 -#define HMATRIX_SCFG9 0x0064 -#define HMATRIX_SCFG10 0x0068 -#define HMATRIX_SCFG11 0x006c -#define HMATRIX_SCFG12 0x0070 -#define HMATRIX_SCFG13 0x0074 -#define HMATRIX_SCFG14 0x0078 -#define HMATRIX_SCFG15 0x007c -#define HMATRIX_PRAS0 0x0080 -#define HMATRIX_PRBS0 0x0084 -#define HMATRIX_PRAS1 0x0088 -#define HMATRIX_PRBS1 0x008c -#define HMATRIX_PRAS2 0x0090 -#define HMATRIX_PRBS2 0x0094 -#define HMATRIX_PRAS3 0x0098 -#define HMATRIX_PRBS3 0x009c -#define HMATRIX_PRAS4 0x00a0 -#define HMATRIX_PRBS4 0x00a4 -#define HMATRIX_PRAS5 0x00a8 -#define HMATRIX_PRBS5 0x00ac -#define HMATRIX_PRAS6 0x00b0 -#define HMATRIX_PRBS6 0x00b4 -#define HMATRIX_PRAS7 0x00b8 -#define HMATRIX_PRBS7 0x00bc -#define HMATRIX_PRAS8 0x00c0 -#define HMATRIX_PRBS8 0x00c4 -#define HMATRIX_PRAS9 0x00c8 -#define HMATRIX_PRBS9 0x00cc -#define HMATRIX_PRAS10 0x00d0 -#define HMATRIX_PRBS10 0x00d4 -#define HMATRIX_PRAS11 0x00d8 -#define HMATRIX_PRBS11 0x00dc -#define HMATRIX_PRAS12 0x00e0 -#define HMATRIX_PRBS12 0x00e4 -#define HMATRIX_PRAS13 0x00e8 -#define HMATRIX_PRBS13 0x00ec -#define HMATRIX_PRAS14 0x00f0 -#define HMATRIX_PRBS14 0x00f4 -#define HMATRIX_PRAS15 0x00f8 -#define HMATRIX_PRBS15 0x00fc -#define HMATRIX_MRCR 0x0100 -#define HMATRIX_SFR0 0x0110 -#define HMATRIX_SFR1 0x0114 -#define HMATRIX_SFR2 0x0118 -#define HMATRIX_SFR3 0x011c -#define HMATRIX_SFR4 0x0120 -#define HMATRIX_SFR5 0x0124 -#define HMATRIX_SFR6 0x0128 -#define HMATRIX_SFR7 0x012c -#define HMATRIX_SFR8 0x0130 -#define HMATRIX_SFR9 0x0134 -#define HMATRIX_SFR10 0x0138 -#define HMATRIX_SFR11 0x013c -#define HMATRIX_SFR12 0x0140 -#define HMATRIX_SFR13 0x0144 -#define HMATRIX_SFR14 0x0148 -#define HMATRIX_SFR15 0x014c - -/* Bitfields in MCFGx */ -#define HMATRIX_ULBT_OFFSET 0 -#define HMATRIX_ULBT_SIZE 3 - -/* Bitfields in SCFGx */ -#define HMATRIX_SLOT_CYCLE_OFFSET 0 -#define HMATRIX_SLOT_CYCLE_SIZE 8 -#define HMATRIX_DEFMSTR_TYPE_OFFSET 16 -#define HMATRIX_DEFMSTR_TYPE_SIZE 2 -#define HMATRIX_FIXED_DEFMSTR_OFFSET 18 -#define HMATRIX_FIXED_DEFMSTR_SIZE 4 -#define HMATRIX_ARBT_OFFSET 24 -#define HMATRIX_ARBT_SIZE 2 - -/* Bitfields in PRASx */ -#define HMATRIX_M0PR_OFFSET 0 -#define HMATRIX_M0PR_SIZE 4 -#define HMATRIX_M1PR_OFFSET 4 -#define HMATRIX_M1PR_SIZE 4 -#define HMATRIX_M2PR_OFFSET 8 -#define HMATRIX_M2PR_SIZE 4 -#define HMATRIX_M3PR_OFFSET 12 -#define HMATRIX_M3PR_SIZE 4 -#define HMATRIX_M4PR_OFFSET 16 -#define HMATRIX_M4PR_SIZE 4 -#define HMATRIX_M5PR_OFFSET 20 -#define HMATRIX_M5PR_SIZE 4 -#define HMATRIX_M6PR_OFFSET 24 -#define HMATRIX_M6PR_SIZE 4 -#define HMATRIX_M7PR_OFFSET 28 -#define HMATRIX_M7PR_SIZE 4 - -/* Bitfields in PRBSx */ -#define HMATRIX_M8PR_OFFSET 0 -#define HMATRIX_M8PR_SIZE 4 -#define HMATRIX_M9PR_OFFSET 4 -#define HMATRIX_M9PR_SIZE 4 -#define HMATRIX_M10PR_OFFSET 8 -#define HMATRIX_M10PR_SIZE 4 -#define HMATRIX_M11PR_OFFSET 12 -#define HMATRIX_M11PR_SIZE 4 -#define HMATRIX_M12PR_OFFSET 16 -#define HMATRIX_M12PR_SIZE 4 -#define HMATRIX_M13PR_OFFSET 20 -#define HMATRIX_M13PR_SIZE 4 -#define HMATRIX_M14PR_OFFSET 24 -#define HMATRIX_M14PR_SIZE 4 -#define HMATRIX_M15PR_OFFSET 28 -#define HMATRIX_M15PR_SIZE 4 - -/* Bitfields in SFR4 */ -#define HMATRIX_CS1A_OFFSET 1 -#define HMATRIX_CS1A_SIZE 1 -#define HMATRIX_CS3A_OFFSET 3 -#define HMATRIX_CS3A_SIZE 1 -#define HMATRIX_CS4A_OFFSET 4 -#define HMATRIX_CS4A_SIZE 1 -#define HMATRIX_CS5A_OFFSET 5 -#define HMATRIX_CS5A_SIZE 1 -#define HMATRIX_DBPUC_OFFSET 8 -#define HMATRIX_DBPUC_SIZE 1 - -/* Constants for ULBT */ -#define HMATRIX_ULBT_INFINITE 0 -#define HMATRIX_ULBT_SINGLE 1 -#define HMATRIX_ULBT_FOUR_BEAT 2 -#define HMATRIX_ULBT_EIGHT_BEAT 3 -#define HMATRIX_ULBT_SIXTEEN_BEAT 4 - -/* Constants for DEFMSTR_TYPE */ -#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT 0 -#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT 1 -#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT 2 - -/* Constants for ARBT */ -#define HMATRIX_ARBT_ROUND_ROBIN 0 -#define HMATRIX_ARBT_FIXED_PRIORITY 1 - -/* Bit manipulation macros */ -#define HMATRIX_BIT(name) \ - (1 << HMATRIX_##name##_OFFSET) -#define HMATRIX_BF(name,value) \ - (((value) & ((1 << HMATRIX_##name##_SIZE) - 1)) \ - << HMATRIX_##name##_OFFSET) -#define HMATRIX_BFEXT(name,value) \ - (((value) >> HMATRIX_##name##_OFFSET) \ - & ((1 << HMATRIX_##name##_SIZE) - 1)) -#define HMATRIX_BFINS(name,value,old) \ - (((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1) \ - << HMATRIX_##name##_OFFSET)) \ - | HMATRIX_BF(name,value)) - -#endif /* __HMATRIX_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h index d18a3053be0d..1e9852d65cca 100644 --- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h +++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h @@ -46,4 +46,41 @@ #define DMAC_DMAREQ_2 9 #define DMAC_DMAREQ_3 10 +/* HSB master IDs */ +#define HMATRIX_MASTER_CPU_DCACHE 0 +#define HMATRIX_MASTER_CPU_ICACHE 1 +#define HMATRIX_MASTER_PDC 2 +#define HMATRIX_MASTER_ISI 3 +#define HMATRIX_MASTER_USBA 4 +#define HMATRIX_MASTER_LCDC 5 +#define HMATRIX_MASTER_MACB0 6 +#define HMATRIX_MASTER_MACB1 7 +#define HMATRIX_MASTER_DMACA_M0 8 +#define HMATRIX_MASTER_DMACA_M1 9 + +/* HSB slave IDs */ +#define HMATRIX_SLAVE_SRAM0 0 +#define HMATRIX_SLAVE_SRAM1 1 +#define HMATRIX_SLAVE_PBA 2 +#define HMATRIX_SLAVE_PBB 3 +#define HMATRIX_SLAVE_EBI 4 +#define HMATRIX_SLAVE_USBA 5 +#define HMATRIX_SLAVE_LCDC 6 +#define HMATRIX_SLAVE_DMACA 7 + +/* Bits in HMATRIX SFR4 (EBI) */ +#define HMATRIX_EBI_SDRAM_ENABLE (1 << 1) +#define HMATRIX_EBI_NAND_ENABLE (1 << 3) +#define HMATRIX_EBI_CF0_ENABLE (1 << 4) +#define HMATRIX_EBI_CF1_ENABLE (1 << 5) +#define HMATRIX_EBI_PULLUP_DISABLE (1 << 8) + +/* + * Base addresses of controllers that may be accessed early by + * platform code. + */ +#define PM_BASE 0xfff00000 +#define HMATRIX_BASE 0xfff00800 +#define SDRAMC_BASE 0xfff03800 + #endif /* __ASM_ARCH_AT32AP700X_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/chip.h b/arch/avr32/mach-at32ap/include/mach/chip.h new file mode 100644 index 000000000000..5efca6da6acb --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/chip.h @@ -0,0 +1,19 @@ +/* + * AVR32 chip-specific definitions + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_CHIP_H__ +#define __ASM_AVR32_ARCH_CHIP_H__ + +#if defined(CONFIG_CPU_AT32AP700X) +# include <mach/at32ap700x.h> +#else +# error Unknown chip type selected +#endif + +#endif /* __ASM_AVR32_ARCH_CHIP_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/hmatrix.h b/arch/avr32/mach-at32ap/include/mach/hmatrix.h new file mode 100644 index 000000000000..7a368f227ebc --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/hmatrix.h @@ -0,0 +1,55 @@ +/* + * High-Speed Bus Matrix configuration registers + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __HMATRIX_H +#define __HMATRIX_H + +extern struct clk at32_hmatrix_clk; + +void hmatrix_write_reg(unsigned long offset, u32 value); +u32 hmatrix_read_reg(unsigned long offset); + +void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask); +void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask); + +/* Master Configuration register */ +#define HMATRIX_MCFG(m) (0x0000 + 4 * (m)) +/* Undefined length burst limit */ +# define HMATRIX_MCFG_ULBT_INFINITE 0 /* Infinite length */ +# define HMATRIX_MCFG_ULBT_SINGLE 1 /* Single Access */ +# define HMATRIX_MCFG_ULBT_FOUR_BEAT 2 /* Four beat */ +# define HMATRIX_MCFG_ULBT_EIGHT_BEAT 3 /* Eight beat */ +# define HMATRIX_MCFG_ULBT_SIXTEEN_BEAT 4 /* Sixteen beat */ + +/* Slave Configuration register */ +#define HMATRIX_SCFG(s) (0x0040 + 4 * (s)) +# define HMATRIX_SCFG_SLOT_CYCLE(x) ((x) << 0) /* Max burst cycles */ +# define HMATRIX_SCFG_DEFMSTR_NONE ( 0 << 16) /* No default master */ +# define HMATRIX_SCFG_DEFMSTR_LAST ( 1 << 16) /* Last def master */ +# define HMATRIX_SCFG_DEFMSTR_FIXED ( 2 << 16) /* Fixed def master */ +# define HMATRIX_SCFG_FIXED_DEFMSTR(m) ((m) << 18) /* Fixed master ID */ +# define HMATRIX_SCFG_ARBT_ROUND_ROBIN ( 0 << 24) /* RR arbitration */ +# define HMATRIX_SCFG_ARBT_FIXED_PRIO ( 1 << 24) /* Fixed priority */ + +/* Slave Priority register A (master 0..7) */ +#define HMATRIX_PRAS(s) (0x0080 + 8 * (s)) +# define HMATRIX_PRAS_PRIO(m, p) ((p) << ((m) * 4)) + +/* Slave Priority register A (master 8..15) */ +#define HMATRIX_PRBS(s) (0x0084 + 8 * (s)) +# define HMATRIX_PRBS_PRIO(m, p) ((p) << (((m) - 8) * 4)) + +/* Master Remap Control Register */ +#define HMATRIX_MRCR 0x0100 +# define HMATRIX_MRCR_REMAP(m) ( 1 << (m)) /* Remap master m */ + +/* Special Function Register. Bit definitions are chip-specific */ +#define HMATRIX_SFR(s) (0x0110 + 4 * (s)) + +#endif /* __HMATRIX_H */ diff --git a/arch/avr32/mach-at32ap/pm.c b/arch/avr32/mach-at32ap/pm.c index a0cbef54fc2a..f021edfeaab0 100644 --- a/arch/avr32/mach-at32ap/pm.c +++ b/arch/avr32/mach-at32ap/pm.c @@ -14,12 +14,10 @@ #include <asm/cacheflush.h> #include <asm/sysreg.h> +#include <mach/chip.h> #include <mach/pm.h> #include <mach/sram.h> -/* FIXME: This is only valid for AP7000 */ -#define SDRAMC_BASE 0xfff03800 - #include "sdramc.h" #define SRAM_PAGE_FLAGS (SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1) \ diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h index 694d521edc2f..532a3732c214 100644 --- a/arch/avr32/mach-at32ap/pm.h +++ b/arch/avr32/mach-at32ap/pm.h @@ -4,14 +4,6 @@ #ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__ #define __ARCH_AVR32_MACH_AT32AP_PM_H__ -/* - * We can reduce the code size a bit by using a constant here. Since - * this file is only used on AVR32 AP CPUs with segmentation enabled, - * it's safe to not use ioremap. Generic drivers should of course - * never do this. - */ -#define AT32_PM_BASE 0xfff00000 - /* PM register offsets */ #define PM_MCCTRL 0x0000 #define PM_CKSEL 0x0004 @@ -113,8 +105,8 @@ /* Register access macros */ #define pm_readl(reg) \ - __raw_readl((void __iomem __force *)AT32_PM_BASE + PM_##reg) + __raw_readl((void __iomem __force *)PM_BASE + PM_##reg) #define pm_writel(reg,value) \ - __raw_writel((value), (void __iomem __force *)AT32_PM_BASE + PM_##reg) + __raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg) #endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */ diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 5a097c46bc46..f64d25973a37 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -249,7 +249,7 @@ config MEM_MT48LC8M32B2B5_7 config MEM_MT48LC32M16A2TG_75 bool - depends on (BFIN527_EZKIT || BFIN532_IP0X) + depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP) default y source "arch/blackfin/mach-bf527/Kconfig" @@ -292,7 +292,7 @@ config CLKIN_HZ int "Frequency of the crystal on the board in Hz" default "11059200" if BFIN533_STAMP default "27000000" if BFIN533_EZKIT - default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS) + default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP) default "30000000" if BFIN561_EZKIT default "24576000" if PNAV10 default "10000000" if BFIN532_IP0X @@ -332,7 +332,7 @@ config VCO_MULT default "22" if BFIN533_BLUETECHNIX_CM default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM) default "20" if BFIN561_EZKIT - default "16" if H8606_HVSISTEMAS + default "16" if (H8606_HVSISTEMAS || BLACKSTAMP) help This controls the frequency of the on-chip PLL. This can be between 1 and 64. PLL Frequency = (Crystal Frequency) * (this setting) @@ -622,6 +622,33 @@ config CPLB_SWITCH_TAB_L1 If enabled, the CPLB Switch Tables are linked into L1 data memory. (less latency) +comment "Speed Optimizations" +config BFIN_INS_LOWOVERHEAD + bool "ins[bwl] low overhead, higher interrupt latency" + default y + help + Reads on the Blackfin are speculative. In Blackfin terms, this means + they can be interrupted at any time (even after they have been issued + on to the external bus), and re-issued after the interrupt occurs. + For memory - this is not a big deal, since memory does not change if + it sees a read. + + If a FIFO is sitting on the end of the read, it will see two reads, + when the core only sees one since the FIFO receives both the read + which is cancelled (and not delivered to the core) and the one which + is re-issued (which is delivered to the core). + + To solve this, interrupts are turned off before reads occur to + I/O space. This option controls which the overhead/latency of + controlling interrupts during this time + "n" turns interrupts off every read + (higher overhead, but lower interrupt latency) + "y" turns interrupts off every loop + (low overhead, but longer interrupt latency) + + default behavior is to leave this set to on (type "Y"). If you are experiencing + interrupt latency issues, it is safe and OK to turn this off. + endmenu @@ -933,13 +960,6 @@ endchoice comment "Possible Suspend Mem / Hibernate Wake-Up Sources" depends on PM -config PM_BFIN_WAKE_RTC - bool "Allow Wake-Up from RESET and on-chip RTC" - depends on PM - default n - help - Enable RTC Wake-Up (Voltage Regulator Power-Up) - config PM_BFIN_WAKE_PH6 bool "Allow Wake-Up from on-chip PHY or PH6 GP" depends on PM && (BF52x || BF534 || BF536 || BF537) @@ -947,41 +967,12 @@ config PM_BFIN_WAKE_PH6 help Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up) -config PM_BFIN_WAKE_CAN - bool "Allow Wake-Up from on-chip CAN0/1" - depends on PM && (BF54x || BF534 || BF536 || BF537) - default n - help - Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up) - config PM_BFIN_WAKE_GP bool "Allow Wake-Up from GPIOs" depends on PM && BF54x default n help Enable General-Purpose Wake-Up (Voltage Regulator Power-Up) - -config PM_BFIN_WAKE_USB - bool "Allow Wake-Up from on-chip USB" - depends on PM && (BF54x || BF52x) - default n - help - Enable USB Wake-Up (Voltage Regulator Power-Up) - -config PM_BFIN_WAKE_KEYPAD - bool "Allow Wake-Up from on-chip Keypad" - depends on PM && BF54x - default n - help - Enable Keypad Wake-Up (Voltage Regulator Power-Up) - -config PM_BFIN_WAKE_ROTARY - bool "Allow Wake-Up from on-chip Rotary" - depends on PM && BF54x - default n - help - Enable Rotary Wake-Up (Voltage Regulator Power-Up) - endmenu menu "CPU Frequency scaling" diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig new file mode 100644 index 000000000000..2921f9952d5f --- /dev/null +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -0,0 +1,1195 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26.2 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +CONFIG_BF532=y +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +CONFIG_BF_REV_0_5=y +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_MEM_MT48LC32M16A2TG_75=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_H8606_HVSISTEMAS is not set +# CONFIG_BFIN532_IP0X is not set +CONFIG_BLACKSTAMP=y +# CONFIG_GENERIC_BF533_BOARD is not set + +# +# BF533/2/1 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_UART_ERROR=7 +CONFIG_SPORT0_ERROR=7 +CONFIG_SPI_ERROR=7 +CONFIG_SPORT1_ERROR=7 +CONFIG_PPI_ERROR=7 +CONFIG_DMA_ERROR=7 +CONFIG_PLLWAKE_ERROR=7 +CONFIG_RTC_ERROR=8 +CONFIG_DMA0_PPI=8 +CONFIG_DMA1_SPORT0RX=9 +CONFIG_DMA2_SPORT0TX=9 +CONFIG_DMA3_SPORT1RX=9 +CONFIG_DMA4_SPORT1TX=9 +CONFIG_DMA5_SPI=10 +CONFIG_DMA6_UARTRX=10 +CONFIG_DMA7_UARTTX=10 +CONFIG_TIMER0=11 +CONFIG_TIMER1=11 +CONFIG_TIMER2=11 +CONFIG_PFA=12 +CONFIG_PFB=12 +CONFIG_MEMDMA0=13 +CONFIG_MEMDMA1=13 +CONFIG_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +# CONFIG_PLL_BYPASS is not set +# CONFIG_CLKIN_HALF is not set +CONFIG_VCO_MULT=16 +CONFIG_CCLK_DIV_1=y +# CONFIG_CCLK_DIV_2 is not set +# CONFIG_CCLK_DIV_4 is not set +# CONFIG_CCLK_DIV_8 is not set +CONFIG_SCLK_DIV=3 +CONFIG_MAX_MEM_SIZE=64 +CONFIG_MAX_VCO_HZ=400000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Memory Setup +# + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +# CONFIG_RAMKERNEL is not set +CONFIG_ROMKERNEL=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_BFIN_GPTIMERS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xAAC2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM_BFIN_SLEEP_DEEPER=y +# CONFIG_PM_BFIN_SLEEP is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# Possible Suspend Mem / Hibernate Wake-Up Sources +# + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_GPIO_ADDR is not set +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_M25P80=y +# CONFIG_M25PXX_USE_FAST_READ is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +CONFIG_BF5xx_PPI=y +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +CONFIG_SIMPLE_GPIO=m +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_ALGOBIT=m + +# +# I2C Hardware Bus support +# +CONFIG_I2C_GPIO=m +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_AT25=y +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_SPI=y +# CONFIG_SPI_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=y +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig new file mode 100644 index 000000000000..c482ee171f9e --- /dev/null +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -0,0 +1,693 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24.7 +# Thu Jul 31 00:53:15 2008 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +# CONFIG_BFIN537_STAMP is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +CONFIG_BFIN537_BLUETECHNIX_TCM=y +# CONFIG_PNAV10 is not set +# CONFIG_CAMSIG_MINOTAUR is not set +# CONFIG_GENERIC_BF537_BOARD is not set + +# +# BF537 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_PROG_INTA=12 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=32 +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_GPIO_ADDR is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c index 9eecfa403187..a8b712a24c59 100644 --- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c @@ -25,7 +25,7 @@ #include <asm/cplbinit.h> #if defined(CONFIG_BFIN_ICACHE) -void bfin_icache_init(void) +void __init bfin_icache_init(void) { unsigned long ctrl; int i; @@ -43,7 +43,7 @@ void bfin_icache_init(void) #endif #if defined(CONFIG_BFIN_DCACHE) -void bfin_dcache_init(void) +void __init bfin_dcache_init(void) { unsigned long ctrl; int i; diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c index 8a18399f6072..bd0831592c2c 100644 --- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c @@ -25,7 +25,7 @@ #include <asm/cplbinit.h> #if defined(CONFIG_BFIN_ICACHE) -void bfin_icache_init(void) +void __init bfin_icache_init(void) { unsigned long *table = icplb_table; unsigned long ctrl; @@ -47,7 +47,7 @@ void bfin_icache_init(void) #endif #if defined(CONFIG_BFIN_DCACHE) -void bfin_dcache_init(void) +void __init bfin_dcache_init(void) { unsigned long *table = dcplb_table; unsigned long ctrl; diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 224e7cc30bc5..728f708d3981 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -164,17 +164,13 @@ static struct cplb_desc cplb_data[] = { .name = "Asynchronous Memory Banks", }, { -#ifdef L2_START .start = L2_START, .end = L2_START + L2_LENGTH, .psize = SIZE_1M, .attr = SWITCH_T | I_CPLB | D_CPLB, .i_conf = L2_MEMORY, .d_conf = L2_MEMORY, - .valid = 1, -#else - .valid = 0, -#endif + .valid = (L2_LENGTH > 0), .name = "L2 Memory", }, { diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 23e637eb78da..7a82d10b4ebf 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -52,6 +52,7 @@ EXPORT_SYMBOL(mtd_size); #endif char __initdata command_line[COMMAND_LINE_SIZE]; +unsigned int __initdata *__retx; /* boot memmap, for parsing "memmap=" */ #define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */ @@ -131,14 +132,14 @@ void __init bf53x_relocate_l1_mem(void) dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); -#ifdef L2_LENGTH - l2_length = _ebss_l2 - _stext_l2; - if (l2_length > L2_LENGTH) - panic("L2 SRAM Overflow\n"); + if (L2_LENGTH != 0) { + l2_length = _ebss_l2 - _stext_l2; + if (l2_length > L2_LENGTH) + panic("L2 SRAM Overflow\n"); - /* Copy _stext_l2 to _edata_l2 to L2 SRAM */ - dma_memcpy(_stext_l2, _l2_lma_start, l2_length); -#endif + /* Copy _stext_l2 to _edata_l2 to L2 SRAM */ + dma_memcpy(_stext_l2, _l2_lma_start, l2_length); + } } /* add_memory_region to memmap */ @@ -738,6 +739,16 @@ void __init setup_arch(char **cmdline_p) memory_setup(); + /* Initialize Async memory banks */ + bfin_write_EBIU_AMBCTL0(AMBCTL0VAL); + bfin_write_EBIU_AMBCTL1(AMBCTL1VAL); + bfin_write_EBIU_AMGCTL(AMGCTLVAL); +#ifdef CONFIG_EBIU_MBSCTLVAL + bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL); + bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL); + bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL); +#endif + cclk = get_cclk(); sclk = get_sclk(); @@ -775,7 +786,11 @@ void __init setup_arch(char **cmdline_p) bfin_write_SWRST(DOUBLE_FAULT); if (_bfin_swrst & RESET_DOUBLE) - printk(KERN_INFO "Recovering from Double Fault event\n"); + /* + * don't decode the address, since you don't know if this + * kernel's symbol map is the same as the crashing kernel + */ + printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx); else if (_bfin_swrst & RESET_WDOG) printk(KERN_INFO "Recovering from Watchdog event\n"); else if (_bfin_swrst & RESET_SOFTWARE) @@ -1049,7 +1064,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, BFIN_DLINES); #ifdef CONFIG_BFIN_ICACHE_LOCK - switch (read_iloc()) { + switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) { case WAY0_L: seq_printf(m, "Way0 Locked-Down\n"); break; diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index ad922ab91543..9a9d5083acfd 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -567,7 +567,7 @@ bool get_instruction(unsigned short *val, unsigned short *address) * we don't read something in the async space that can hang forever */ if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) || -#ifdef L2_START +#if L2_LENGTH != 0 (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) || #endif (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) || @@ -601,12 +601,55 @@ bool get_instruction(unsigned short *val, unsigned short *address) return false; } +/* + * decode the instruction if we are printing out the trace, as it + * makes things easier to follow, without running it through objdump + * These are the normal instructions which cause change of flow, which + * would be at the source of the trace buffer + */ +void decode_instruction(unsigned short *address) +{ + unsigned short opcode; + + if (get_instruction(&opcode, address)) { + if (opcode == 0x0010) + printk("RTS"); + else if (opcode == 0x0011) + printk("RTI"); + else if (opcode == 0x0012) + printk("RTX"); + else if (opcode >= 0x0050 && opcode <= 0x0057) + printk("JUMP (P%i)", opcode & 7); + else if (opcode >= 0x0060 && opcode <= 0x0067) + printk("CALL (P%i)", opcode & 7); + else if (opcode >= 0x0070 && opcode <= 0x0077) + printk("CALL (PC+P%i)", opcode & 7); + else if (opcode >= 0x0080 && opcode <= 0x0087) + printk("JUMP (PC+P%i)", opcode & 7); + else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF)) + printk("IF !CC JUMP"); + else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff)) + printk("IF CC JUMP"); + else if (opcode >= 0x2000 && opcode <= 0x2fff) + printk("JUMP.S"); + else if (opcode >= 0xe080 && opcode <= 0xe0ff) + printk("LSETUP"); + else if (opcode >= 0xe200 && opcode <= 0xe2ff) + printk("JUMP.L"); + else if (opcode >= 0xe300 && opcode <= 0xe3ff) + printk("CALL pcrel"); + else + printk("0x%04x", opcode); + } + +} + void dump_bfin_trace_buffer(void) { #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON int tflags, i = 0; char buf[150]; - unsigned short val = 0, *addr; + unsigned short *addr; #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND int j, index; #endif @@ -615,6 +658,10 @@ void dump_bfin_trace_buffer(void) printk(KERN_NOTICE "Hardware Trace:\n"); +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n"); +#endif + if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) { for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { decode_address(buf, (unsigned long)bfin_read_TBUF()); @@ -622,45 +669,14 @@ void dump_bfin_trace_buffer(void) addr = (unsigned short *)bfin_read_TBUF(); decode_address(buf, (unsigned long)addr); printk(KERN_NOTICE " Source : %s ", buf); - if (get_instruction(&val, addr)) { - if (val == 0x0010) - printk("RTS"); - else if (val == 0x0011) - printk("RTI"); - else if (val == 0x0012) - printk("RTX"); - else if (val >= 0x0050 && val <= 0x0057) - printk("JUMP (P%i)", val & 7); - else if (val >= 0x0060 && val <= 0x0067) - printk("CALL (P%i)", val & 7); - else if (val >= 0x0070 && val <= 0x0077) - printk("CALL (PC+P%i)", val & 7); - else if (val >= 0x0080 && val <= 0x0087) - printk("JUMP (PC+P%i)", val & 7); - else if ((val >= 0x1000 && val <= 0x13FF) || - (val >= 0x1800 && val <= 0x1BFF)) - printk("IF !CC JUMP"); - else if ((val >= 0x1400 && val <= 0x17ff) || - (val >= 0x1c00 && val <= 0x1fff)) - printk("IF CC JUMP"); - else if (val >= 0x2000 && val <= 0x2fff) - printk("JUMP.S"); - else if (val >= 0xe080 && val <= 0xe0ff) - printk("LSETUP"); - else if (val >= 0xe200 && val <= 0xe2ff) - printk("JUMP.L"); - else if (val >= 0xe300 && val <= 0xe3ff) - printk("CALL pcrel"); - else - printk("0x%04x", val); - } + decode_instruction(addr); printk("\n"); } } #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND if (trace_buff_offset) - index = trace_buff_offset/4 - 1; + index = trace_buff_offset / 4; else index = EXPAND_LEN; @@ -672,7 +688,9 @@ void dump_bfin_trace_buffer(void) if (index < 0 ) index = EXPAND_LEN; decode_address(buf, software_trace_buff[index]); - printk(KERN_NOTICE " Source : %s\n", buf); + printk(KERN_NOTICE " Source : %s ", buf); + decode_instruction((unsigned short *)software_trace_buff[index]); + printk("\n"); index -= 1; if (index < 0) index = EXPAND_LEN; diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 0896e38d6108..7d12c6692a65 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -83,6 +83,7 @@ SECTIONS #if !L1_DATA_B_LENGTH *(.l1.bss.B) #endif + . = ALIGN(4); ___bss_stop = .; } @@ -101,7 +102,7 @@ SECTIONS #if !L1_DATA_B_LENGTH *(.l1.data.B) #endif -#ifndef L2_LENGTH +#if !L2_LENGTH . = ALIGN(32); *(.data_l2.cacheline_aligned) *(.l2.data) @@ -211,20 +212,19 @@ SECTIONS __ebss_b_l1 = .; } -#ifdef L2_LENGTH __l2_lma_start = .; .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1)) { . = ALIGN(4); __stext_l2 = .; - *(.l1.text) + *(.l2.text) . = ALIGN(4); __etext_l2 = .; . = ALIGN(4); __sdata_l2 = .; - *(.l1.data) + *(.l2.data) __edata_l2 = .; . = ALIGN(32); @@ -232,11 +232,10 @@ SECTIONS . = ALIGN(4); __sbss_l2 = .; - *(.l1.bss) + *(.l2.bss) . = ALIGN(4); __ebss_l2 = .; } -#endif /* Force trailing alignment of our init section so that when we * free our init memory, we don't leave behind a partial page. diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index eba2343b1b59..d60554dce87b 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -33,7 +33,28 @@ .align 2 +/* + * Reads on the Blackfin are speculative. In Blackfin terms, this means they + * can be interrupted at any time (even after they have been issued on to the + * external bus), and re-issued after the interrupt occurs. + * + * If a FIFO is sitting on the end of the read, it will see two reads, + * when the core only sees one. The FIFO receives the read which is cancelled, + * and not delivered to the core. + * + * To solve this, interrupts are turned off before reads occur to I/O space. + * There are 3 versions of all these functions + * - turns interrupts off every read (higher overhead, but lower latency) + * - turns interrupts off every loop (low overhead, but longer latency) + * - DMA version, which do not suffer from this issue. DMA versions have + * different name (prefixed by dma_ ), and are located in + * ../kernel/bfin_dma_5xx.c + * Using the dma related functions are recommended for transfering large + * buffers in/out of FIFOs. + */ + ENTRY(_insl) +#ifdef CONFIG_BFIN_INS_LOWOVERHEAD P0 = R0; /* P0 = port */ cli R3; P1 = R1; /* P1 = address */ @@ -46,9 +67,26 @@ ENTRY(_insl) .Llong_loop_e: NOP; sti R3; RTS; +#else + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2; +.Llong_loop_s: + CLI R3; + NOP; NOP; NOP; + R0 = [P0]; + [P1++] = R0; +.Llong_loop_e: + STI R3; + + RTS; +#endif ENDPROC(_insl) ENTRY(_insw) +#ifdef CONFIG_BFIN_INS_LOWOVERHEAD P0 = R0; /* P0 = port */ cli R3; P1 = R1; /* P1 = address */ @@ -61,9 +99,26 @@ ENTRY(_insw) .Lword_loop_e: NOP; sti R3; RTS; +#else + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2; +.Lword_loop_s: + CLI R3; + NOP; NOP; NOP; + R0 = W[P0]; + W[P1++] = R0; +.Lword_loop_e: + STI R3; + RTS; + +#endif ENDPROC(_insw) ENTRY(_insw_8) +#ifdef CONFIG_BFIN_INS_LOWOVERHEAD P0 = R0; /* P0 = port */ cli R3; P1 = R1; /* P1 = address */ @@ -78,9 +133,29 @@ ENTRY(_insw_8) .Lword8_loop_e: NOP; sti R3; RTS; +#else + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2; +.Lword8_loop_s: + CLI R3; + NOP; NOP; NOP; + R0 = W[P0]; + B[P1++] = R0; + R0 = R0 >> 8; + B[P1++] = R0; + NOP; +.Lword8_loop_e: + STI R3; + + RTS; +#endif ENDPROC(_insw_8) ENTRY(_insb) +#ifdef CONFIG_BFIN_INS_LOWOVERHEAD P0 = R0; /* P0 = port */ cli R3; P1 = R1; /* P1 = address */ @@ -93,9 +168,26 @@ ENTRY(_insb) .Lbyte_loop_e: NOP; sti R3; RTS; +#else + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2; +.Lbyte_loop_s: + CLI R3; + NOP; NOP; NOP; + R0 = B[P0]; + B[P1++] = R0; +.Lbyte_loop_e: + STI R3; + + RTS; +#endif ENDPROC(_insb) ENTRY(_insl_16) +#ifdef CONFIG_BFIN_INS_LOWOVERHEAD P0 = R0; /* P0 = port */ cli R3; P1 = R1; /* P1 = address */ @@ -110,4 +202,21 @@ ENTRY(_insl_16) .Llong16_loop_e: NOP; sti R3; RTS; +#else + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2; +.Llong16_loop_s: + CLI R3; + NOP; NOP; NOP; + R0 = [P0]; + W[P1++] = R0; + R0 = R0 >> 16; + W[P1++] = R0; +.Llong16_loop_e: + STI R3; + RTS; +#endif ENDPROC(_insl_16) diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 0b26ae2de5ee..d22bc7773717 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -39,7 +39,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/pata_platform.h> #include <linux/i2c.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -160,15 +159,15 @@ static struct platform_device musb_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -200,12 +199,12 @@ static struct platform_device ezkit_flash_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, @@ -438,12 +437,12 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -799,43 +798,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -961,10 +923,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport1_uart_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -987,10 +945,6 @@ static int __init stamp_init(void) platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 689b69c98ee4..762f754c06cc 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/i2c.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -177,15 +176,15 @@ static struct platform_device bf52x_t350mcqb_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -217,12 +216,12 @@ static struct platform_device ezkit_flash_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, @@ -460,12 +459,12 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -825,43 +824,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -996,10 +958,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport1_uart_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -1022,10 +980,6 @@ static int __init stamp_init(void) platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index fe05cc1ef174..c3334cc5bcb7 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -30,293 +30,11 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> -#include <asm/trace.h> - #ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif -.extern ___bss_stop -.extern ___bss_start -.extern _bf53x_relocate_l1_mem - -#define INITIAL_STACK 0xFFB01000 - -__INIT - -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - -#if defined(CONFIG_BF527) - p0.h = hi(EMAC_SYSTAT); - p0.l = lo(EMAC_SYSTAT); - R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */ - R0.l = 0xFFFF; - [P0] = R0; - SSYNC; -#endif - - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(UART1_LCR); - p0.l = lo(UART1_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(UART1_DLL); - p0.l = lo(UART1_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(UART1_DLH); - p0.l = lo(UART1_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(UART1_GCTL); - p0.l = lo(UART1_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) - -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) @@ -420,13 +138,6 @@ ENTRY(_start_dma_code) [P2] = R1; SSYNC; - p0.h = hi(SIC_IWR0); - p0.l = lo(SIC_IWR0); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf527/ints-priority.c b/arch/blackfin/mach-bf527/ints-priority.c index 1fa389793968..8a2367403d2b 100644 --- a/arch/blackfin/mach-bf527/ints-priority.c +++ b/arch/blackfin/mach-bf527/ints-priority.c @@ -31,7 +31,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> -void program_IAR(void) +void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 4103a97c1a70..c66a68f30239 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <asm/dma.h> @@ -141,16 +140,16 @@ static struct platform_device net2272_bfin_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00060000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0x100000, .offset = 0x60000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x6a0000, .offset = 0x00160000, } diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig index 840059241fbe..308c98dc5aba 100644 --- a/arch/blackfin/mach-bf533/boards/Kconfig +++ b/arch/blackfin/mach-bf533/boards/Kconfig @@ -14,6 +14,12 @@ config BFIN533_STAMP help BF533-STAMP board support. +config BLACKSTAMP + bool "BlackStamp" + help + Support for the BlackStamp board. Hardware info available at + http://blackfin.uclinux.org/gf/project/blackstamp/ + config BFIN533_BLUETECHNIX_CM bool "Bluetechnix CM-BF533" depends on (BF533) diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index b7a1a1d79bda..9afbe72b484f 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_BFIN533_STAMP) += stamp.o obj-$(CONFIG_BFIN532_IP0X) += ip0x.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o +obj-$(CONFIG_BLACKSTAMP) += blackstamp.o obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c new file mode 100644 index 000000000000..d064ded87719 --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -0,0 +1,401 @@ +/* + * File: arch/blackfin/mach-bf533/blackstamp.c + * Based on: arch/blackfin/mach-bf533/stamp.c + * Author: Benjamin Matthews <bmat@lle.rochester.edu> + * Aidan Williams <aidan@nicta.com.au> + * + * Created: 2008 + * Description: Board Info File for the BlackStamp + * + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * More info about the BlackStamp at: + * http://blackfin.uclinux.org/gf/project/blackstamp/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/irq.h> +#include <linux/i2c.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "BlackStamp"; + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF3, + .end = IRQ_PF3, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0x180000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(spi)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 2, /* Framework chip select. */ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 7, + .controller_data = &spidev_chip_info, + }, +#endif +}; + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF5, 0, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF6, 0, "gpio-keys: BTN2"}, +}; /* Mapped to the first three PF Test Points */ + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include <linux/i2c-gpio.h> + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 8, + .scl_pin = 9, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; /* This hasn't actually been used these pins + * are (currently) free pins on the expansion connector */ + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +}; +#endif + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 376000000), + VRPAIR(VLEV_095, 426000000), + VRPAIR(VLEV_100, 426000000), + VRPAIR(VLEV_105, 476000000), + VRPAIR(VLEV_110, 476000000), + VRPAIR(VLEV_115, 476000000), + VRPAIR(VLEV_120, 600000000), + VRPAIR(VLEV_125, 600000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *stamp_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif + + &bfin_gpios_device, +}; + +static int __init blackstamp_init(void) +{ + int ret; + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + + ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + if (ret < 0) + return ret; + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0); + bfin_write_FIO_FLAG_S(PF0); + SSYNC(); +#endif + + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + return 0; +} + +arch_initcall(blackstamp_init); diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index ed2b0b8f5dc9..575843f6d9ef 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -36,7 +36,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -53,16 +52,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF533"; #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } @@ -307,43 +306,6 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 38 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 2, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x2030C000, - .end = 0x2030C01F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2030D018, - .end = 0x2030D01B, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - static const unsigned int cclk_vlev_datasheet[] = { VRPAIR(VLEV_085, 250000000), @@ -403,10 +365,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif }; static int __init cm_bf533_init(void) @@ -416,10 +374,6 @@ static int __init cm_bf533_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 079389cbd859..cc2e7eeb1d5a 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -37,7 +37,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -90,16 +89,16 @@ static struct platform_device smc91x_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "file system", + .name = "file system(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -255,43 +254,6 @@ static struct platform_device bfin_sir_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -404,10 +366,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sir_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -424,10 +382,6 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 13ae49515f73..050ffca53530 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/i2c.h> #include <asm/dma.h> @@ -114,15 +113,15 @@ static struct platform_device net2272_bfin_device = { #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) static struct mtd_partition stamp_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0xE0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -164,16 +163,16 @@ static struct platform_device stamp_flash_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "file system", + .name = "file system(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -404,43 +403,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -583,10 +545,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport1_uart_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -625,10 +583,6 @@ static int __init stamp_init(void) #endif spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index c671e8549b17..d59db86195b6 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -30,294 +30,11 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> -#include <asm/trace.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif -.extern ___bss_stop -.extern ___bss_start -.extern _bf53x_relocate_l1_mem - -#define INITIAL_STACK 0xFFB01000 - -__INIT - -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - p0.h = hi(FIO_MASKA_C); - p0.l = lo(FIO_MASKA_C); - r0 = 0xFFFF(Z); - w[p0] = r0.L; /* Disable all interrupts */ - ssync; - - p0.h = hi(FIO_MASKB_C); - p0.l = lo(FIO_MASKB_C); - r0 = 0xFFFF(Z); - w[p0] = r0.L; /* Disable all interrupts */ - ssync; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(BFIN_UART_LCR); - p0.l = lo(BFIN_UART_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(BFIN_UART_DLL); - p0.l = lo(BFIN_UART_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_DLH); - p0.l = lo(BFIN_UART_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_GCTL); - p0.l = lo(BFIN_UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) - -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) @@ -412,13 +129,6 @@ ENTRY(_start_dma_code) [P2] = R1; SSYNC; - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c index 7d79e0f9503d..f51994b7a2b9 100644 --- a/arch/blackfin/mach-bf533/ints-priority.c +++ b/arch/blackfin/mach-bf533/ints-priority.c @@ -31,7 +31,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> -void program_IAR(void) +void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) | diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig index 7e789dbef036..42a57b0acb29 100644 --- a/arch/blackfin/mach-bf537/boards/Kconfig +++ b/arch/blackfin/mach-bf537/boards/Kconfig @@ -15,6 +15,12 @@ config BFIN537_BLUETECHNIX_CM help CM-BF537 support for EVAL- and DEV-Board. +config BFIN537_BLUETECHNIX_TCM + bool "Bluetechnix TCM-BF537" + depends on (BF537) + help + TCM-BF537 support for EVAL- and DEV-Board. + config PNAV10 bool "PNAV board" depends on (BF537) diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index c94f7a5b8211..7168cc14afd8 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -5,5 +5,6 @@ obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o obj-$(CONFIG_BFIN537_STAMP) += stamp.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o +obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o obj-$(CONFIG_PNAV10) += pnav10.o obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 73f2142875e2..dde14720b0ea 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -33,6 +33,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -56,16 +57,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF537"; #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } @@ -307,6 +308,55 @@ static struct platform_device net2272_bfin_device = { }; #endif +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +static struct mtd_partition cm_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data cm_flash_data = { + .width = 2, + .parts = cm_partitions, + .nr_parts = ARRAY_SIZE(cm_partitions), +}; + +static unsigned cm_flash_gpios[] = { GPIO_PF4 }; + +static struct resource cm_flash_resource[] = { + { + .name = "cfi_probe", + .start = 0x20000000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, + }, { + .start = (unsigned long)cm_flash_gpios, + .end = ARRAY_SIZE(cm_flash_gpios), + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device cm_flash_device = { + .name = "gpio-addr-flash", + .id = 0, + .dev = { + .platform_data = &cm_flash_data, + }, + .num_resources = ARRAY_SIZE(cm_flash_resource), + .resource = cm_flash_resource, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { @@ -395,7 +445,7 @@ static struct platform_device bfin_mac_device = { #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 64 +#define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, @@ -510,6 +560,10 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) + &cm_flash_device, +#endif }; static int __init cm_bf537_init(void) diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 01b63e2ec18f..78a13d5bfd55 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/usb/sl811.h> @@ -307,16 +306,16 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } @@ -619,43 +618,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, @@ -717,10 +679,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport0_uart_device, &bfin_sport1_uart_device, #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif }; static int __init stamp_init(void) @@ -732,9 +690,6 @@ static int __init stamp_init(void) ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index 18ddf7a52005..48c4cd2d1be6 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -100,16 +100,16 @@ static struct platform_device net2272_bfin_device = { static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "uboot", + .name = "bootloader(spi)", .size = PSIZE_UBOOT, .offset = 0x000000, .mask_flags = MTD_CAP_ROM }, { - .name = "initramfs", + .name = "initramfs(spi)", .size = PSIZE_INITRAMFS, .offset = PSIZE_UBOOT }, { - .name = "opt", + .name = "opt(spi)", .size = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS), .offset = PSIZE_UBOOT + PSIZE_INITRAMFS, } diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 51c3bab14a69..f9174c11cbd4 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -231,16 +231,16 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 6dbc76fb080b..e93964fdb432 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -364,11 +364,11 @@ const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { { - .name = "linux kernel", + .name = "linux kernel(nand)", .size = 0x400000, .offset = 0, }, { - .name = "file system", + .name = "file system(nand)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, }, @@ -439,19 +439,19 @@ static void bfin_plat_nand_init(void) {} #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition stamp_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0xE0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = 0x400000 - 0x40000 - 0xE0000 - 0x10000, .offset = MTDPART_OFS_APPEND, }, { - .name = "MAC Address", + .name = "MAC Address(nor)", .size = MTDPART_SIZ_FULL, .offset = 0x3F0000, .mask_flags = MTD_WRITEABLE, @@ -485,16 +485,16 @@ static struct platform_device stamp_flash_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "file system", + .name = "file system(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c new file mode 100644 index 000000000000..d5ff705a5129 --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -0,0 +1,590 @@ +/* + * File: arch/blackfin/mach-bf537/boards/tcm_bf537.c + * Based on: arch/blackfin/mach-bf533/boards/cm_bf537.c + * Author: Aidan Williams <aidan@nicta.com.au> + * + * Created: 2005 + * Description: Board description file + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/etherdevice.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include <linux/usb/isp1362.h> +#endif +#include <linux/ata_platform.h> +#include <linux/irq.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "Bluetechnix TCM BF537"; + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00020000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0xe0000, + .offset = 0x20000 + }, { + .name = "file system(spi)", + .size = 0x700000, + .offset = 0x00100000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +static struct bfin5xx_spi_chip ad9960_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) + { + .modalias = "ad9960-spi", + .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &ad9960_spi_chip_info, + }, +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 7, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +static struct platform_device hitachi_fb_device = { + .name = "hitachi-tx09", +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .start = 0x20200300, + .end = 0x20200300 + 16, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF14, + .end = IRQ_PF14, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20308000, + .end = 0x20308000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20308004, + .end = 0x20308004, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PG15, + .end = IRQ_PG15, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20200000, + .end = 0x20200000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PH14, + .end = IRQ_PH14, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +static struct mtd_partition cm_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data cm_flash_data = { + .width = 2, + .parts = cm_partitions, + .nr_parts = ARRAY_SIZE(cm_partitions), +}; + +static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 }; + +static struct resource cm_flash_resource[] = { + { + .name = "cfi_probe", + .start = 0x20000000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, + }, { + .start = (unsigned long)cm_flash_gpios, + .end = ARRAY_SIZE(cm_flash_gpios), + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device cm_flash_device = { + .name = "gpio-addr-flash", + .id = 0, + .dev = { + .platform_data = &cm_flash_data, + }, + .num_resources = ARRAY_SIZE(cm_flash_resource), + .resource = cm_flash_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT IRQ_PF14 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2030C000, + .end = 0x2030C01F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2030D018, + .end = 0x2030D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 376000000), + VRPAIR(VLEV_095, 426000000), + VRPAIR(VLEV_100, 426000000), + VRPAIR(VLEV_105, 476000000), + VRPAIR(VLEV_110, 476000000), + VRPAIR(VLEV_115, 476000000), + VRPAIR(VLEV_120, 500000000), + VRPAIR(VLEV_125, 533000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *cm_bf537_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) + &hitachi_fb_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif + +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) + &cm_flash_device, +#endif +}; + +static int __init cm_bf537_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif + return 0; +} + +arch_initcall(cm_bf537_init); + +void bfin_get_ether_addr(char *addr) +{ + random_ether_addr(addr); + printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); +} +EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 6b019eaee0b6..64e0287ab266 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -30,325 +30,11 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> -#include <asm/trace.h> - #ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif -.extern ___bss_stop -.extern ___bss_start -.extern _bf53x_relocate_l1_mem - -#define INITIAL_STACK 0xFFB01000 - -__INIT - -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Initialise General-Purpose I/O Modules on BF537 */ - /* Rev 0.0 Anomaly 05000212 - PORTx_FER, - * PORT_MUX Registers Do Not accept "writes" correctly: - */ - p0.h = hi(BFIN_PORT_MUX); - p0.l = lo(BFIN_PORT_MUX); -#if ANOMALY_05000212 - R0.L = W[P0]; /* Read */ - SSYNC; -#endif - R0 = (PGDE_UART | PFTE_UART)(Z); -#if ANOMALY_05000212 - W[P0] = R0.L; /* Write */ - SSYNC; -#endif - W[P0] = R0.L; /* Enable both UARTS */ - SSYNC; - - p0.h = hi(PORTF_FER); - p0.l = lo(PORTF_FER); -#if ANOMALY_05000212 - R0.L = W[P0]; /* Read */ - SSYNC; -#endif - R0 = 0x000F(Z); -#if ANOMALY_05000212 - W[P0] = R0.L; /* Write */ - SSYNC; -#endif - /* Enable peripheral function of PORTF for UART0 and UART1 */ - W[P0] = R0.L; - SSYNC; - -#if !defined(CONFIG_BF534) - p0.h = hi(EMAC_SYSTAT); - p0.l = lo(EMAC_SYSTAT); - R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */ - R0.l = 0xFFFF; - [P0] = R0; - SSYNC; -#endif - - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(BFIN_UART_LCR); - p0.l = lo(BFIN_UART_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(BFIN_UART_DLL); - p0.l = lo(BFIN_UART_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_DLH); - p0.l = lo(BFIN_UART_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_GCTL); - p0.l = lo(BFIN_UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) - -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) @@ -452,13 +138,6 @@ ENTRY(_start_dma_code) [P2] = R1; SSYNC; - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c index a8b915f202ec..b1300b3f1812 100644 --- a/arch/blackfin/mach-bf537/ints-priority.c +++ b/arch/blackfin/mach-bf537/ints-priority.c @@ -31,7 +31,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> -void program_IAR(void) +void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 4f4ae8787edf..58abbed0a225 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -319,12 +319,12 @@ static struct platform_device bfin_atapi_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = 4 * SIZE_1M, .size = (256 - 4) * SIZE_1M, }, @@ -377,12 +377,12 @@ static struct platform_device bf54x_sdh_device = { /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = 0x1c0000, .offset = 0x40000 } diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 166fa2201ee7..0d6333ada1d9 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -365,12 +365,12 @@ static struct platform_device bfin_atapi_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, @@ -419,15 +419,15 @@ static struct platform_device bf54x_sdh_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -461,12 +461,12 @@ static struct platform_device ezkit_flash_device = { /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 06b9178cfcfe..e3000f70a26e 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -30,263 +30,11 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> -#include <asm/trace.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif -.extern ___bss_stop -.extern ___bss_start -.extern _bf53x_relocate_l1_mem - -#define INITIAL_STACK 0xFFB01000 - -__INIT - -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers*/ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers*/ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - - /* Initialize stack pointer */ - SP.L = LO(INITIAL_STACK); - SP.H = HI(INITIAL_STACK); - FP = SP; - USP = SP; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - p2.h = hi(EBIU_MBSCTL); - p2.l = lo(EBIU_MBSCTL); - r0.h = hi(CONFIG_EBIU_MBSCTLVAL); - r0.l = lo(CONFIG_EBIU_MBSCTLVAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_MODE); - p2.l = lo(EBIU_MODE); - r0.h = hi(CONFIG_EBIU_MODEVAL); - r0.l = lo(CONFIG_EBIU_MODEVAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_FCTL); - p2.l = lo(EBIU_FCTL); - r0.h = hi(CONFIG_EBIU_FCTLVAL); - r0.l = lo(CONFIG_EBIU_FCTLVAL); - [p2] = r0; - ssync; - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; - nop; - nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) - -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - call _start_kernel; -.L_exit: - jump.s .L_exit; -ENDPROC(_real_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) @@ -443,13 +191,6 @@ ENTRY(_start_dma_code) SSYNC; #endif - p0.h = hi(SIC_IWR0); - p0.l = lo(SIC_IWR0); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c index 2665653cee37..9dd0fa3ac4de 100644 --- a/arch/blackfin/mach-bf548/ints-priority.c +++ b/arch/blackfin/mach-bf548/ints-priority.c @@ -31,7 +31,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> -void program_IAR(void) +void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 466ef5929a25..8f40990eea2f 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -54,16 +54,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF561"; #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } @@ -306,7 +306,7 @@ static struct platform_device bfin_sir_device = { #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 119 +#define PATA_INT IRQ_PF46 static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index bc6feded8569..50b4cdceccfe 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -35,7 +35,6 @@ #include <linux/spi/spi.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/ata_platform.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -243,15 +242,15 @@ static struct platform_device bfin_sir_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -350,43 +349,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -499,10 +461,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sir_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -538,10 +496,6 @@ static int __init ezkit_init(void) #endif spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index cf1a2dff01e7..c7a81e34703d 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -30,284 +30,13 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> -#include <asm/trace.h> - -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif -.extern ___bss_stop -.extern ___bss_start -.extern _bf53x_relocate_l1_mem - -#define INITIAL_STACK 0xFFB01000 - -__INIT - -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(BFIN_UART_LCR); - p0.l = lo(BFIN_UART_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(BFIN_UART_DLL); - p0.l = lo(BFIN_UART_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_DLH); - p0.l = lo(BFIN_UART_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_GCTL); - p0.l = lo(BFIN_UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#if CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) - -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOGA_CTL); - p0.h = hi(WDOGA_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - -__FINIT - .section .l1.text -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) p0.h = hi(SICA_IWR0); p0.l = lo(SICA_IWR0); diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c index 09b541b0f7c2..9d2f23344720 100644 --- a/arch/blackfin/mach-bf561/ints-priority.c +++ b/arch/blackfin/mach-bf561/ints-priority.c @@ -31,7 +31,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> -void program_IAR(void) +void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 422bfee34adc..e6ed57c56d4b 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -3,9 +3,10 @@ # obj-y := \ - cache.o cacheinit.o entry.o \ - interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o + cache.o entry.o head.o \ + interrupt.o irqpanic.o arch_checks.o ints-priority.o +obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o obj-$(CONFIG_PM) += pm.o dpmc_modes.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index f9160d83b91f..5986758b2752 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -27,6 +27,7 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <asm/fixed_code.h> #include <asm/mach/anomaly.h> #include <asm/mach-common/clocks.h> @@ -53,3 +54,11 @@ # endif #endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +#if CONFIG_BOOT_LOAD < FIXED_CODE_END +# error "The kernel load address must be after the fixed code section" +#endif + +#if (CONFIG_BOOT_LOAD & 0x3) +# error "The kernel load address must be 4 byte aligned" +#endif diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index 0521b1588204..85f8c79b3c37 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -34,81 +34,6 @@ #include <asm/cache.h> .text -.align 2 -ENTRY(_cache_invalidate) - - /* - * Icache or DcacheA or DcacheB Invalidation - * or any combination thereof - * R0 has bits - * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P - * set as required - */ - [--SP] = R7; - - R7 = R0; - CC = BITTST(R7,CPLB_ENABLE_ICACHE_P); - IF !CC JUMP .Lno_icache; - [--SP] = RETS; - CALL _icache_invalidate; - RETS = [SP++]; -.Lno_icache: - CC = BITTST(R7,CPLB_ENABLE_DCACHE_P); - IF !CC JUMP .Lno_dcache_a; - R0 = 0; /* specifies bank A */ - [--SP] = RETS; - CALL _dcache_invalidate; - RETS = [SP++]; -.Lno_dcache_a: - CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P); - IF !CC JUMP .Lno_dcache_b; - R0 = 0; - BITSET(R0, 23); /* specifies bank B */ - [--SP] = RETS; - CALL _dcache_invalidate; - RETS = [SP++]; -.Lno_dcache_b: - R7 = [SP++]; - RTS; -ENDPROC(_cache_invalidate) - -/* Invalidate the Entire Instruction cache by - * disabling IMC bit - */ -ENTRY(_icache_invalidate) -ENTRY(_invalidate_entire_icache) - [--SP] = ( R7:5); - - P0.L = LO(IMEM_CONTROL); - P0.H = HI(IMEM_CONTROL); - R7 = [P0]; - - /* Clear the IMC bit , All valid bits in the instruction - * cache are set to the invalid state - */ - BITCLR(R7,IMC_P); - CLI R6; - SSYNC; /* SSYNC required before invalidating cache. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the instruction cache agian */ - R6 = (IMC | ENICPLB); - R7 = R7 | R6; - - CLI R6; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - ( R7:5) = [SP++]; - RTS; -ENDPROC(_invalidate_entire_icache) -ENDPROC(_icache_invalidate) /* * blackfin_cache_flush_range(start, end) @@ -190,46 +115,6 @@ ENTRY(_blackfin_dcache_invalidate_range) RTS; ENDPROC(_blackfin_dcache_invalidate_range) -/* Invalidate the Entire Data cache by - * clearing DMC[1:0] bits - */ -ENTRY(_invalidate_entire_dcache) -ENTRY(_dcache_invalidate) - [--SP] = ( R7:6); - - P0.L = LO(DMEM_CONTROL); - P0.H = HI(DMEM_CONTROL); - R7 = [P0]; - - /* Clear the DMC[1:0] bits, All valid bits in the data - * cache are set to the invalid state - */ - BITCLR(R7,DMC0_P); - BITCLR(R7,DMC1_P); - CLI R6; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the data cache again */ - - R6 = DMEM_CNTR; - R7 = R7 | R6; - - CLI R6; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - ( R7:6) = [SP++]; - RTS; -ENDPROC(_dcache_invalidate) -ENDPROC(_invalidate_entire_dcache) - ENTRY(_blackfin_dcache_flush_range) R2 = -L1_CACHE_BYTES; R2 = R0 & R2; diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S deleted file mode 100644 index 22fada0c1cb3..000000000000 --- a/arch/blackfin/mach-common/cacheinit.S +++ /dev/null @@ -1,77 +0,0 @@ -/* - * File: arch/blackfin/mach-common/cacheinit.S - * Based on: - * Author: LG Soft India - * - * Created: ? - * Description: cache initialization - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This function sets up the data and instruction cache. The - * tables like icplb table, dcplb table and Page Descriptor table - * are defined in cplbtab.h. You can configure those tables for - * your suitable requirements - */ - -#include <linux/linkage.h> -#include <asm/blackfin.h> - -.text - -#if ANOMALY_05000125 -#if defined(CONFIG_BFIN_ICACHE) -ENTRY(_bfin_write_IMEM_CONTROL) - - /* Enable Instruction Cache */ - P0.l = LO(IMEM_CONTROL); - P0.h = HI(IMEM_CONTROL); - - /* Anomaly 05000125 */ - CLI R1; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P0] = R0; - SSYNC; - STI R1; - RTS; - -ENDPROC(_bfin_write_IMEM_CONTROL) -#endif - -#if defined(CONFIG_BFIN_DCACHE) -ENTRY(_bfin_write_DMEM_CONTROL) - P0.l = LO(DMEM_CONTROL); - P0.h = HI(DMEM_CONTROL); - - CLI R1; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P0] = R0; - SSYNC; - STI R1; - RTS; - -ENDPROC(_bfin_write_DMEM_CONTROL) -#endif - -#endif diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index 5e3f1d8a4fb8..838b0b2ce9a5 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -78,62 +78,6 @@ ENTRY(_hibernate_mode) jump .Lforever; ENDPROC(_hibernate_mode) -ENTRY(_deep_sleep) - [--SP] = ( R7:0, P5:0 ); - [--SP] = RETS; - - CLI R4; - - R0 = IWR_ENABLE(0); - R1 = IWR_DISABLE_ALL; - R2 = IWR_DISABLE_ALL; - - call _set_sic_iwr; - - call _set_dram_srfs; - - /* Clear all the interrupts,bits sticky */ - R0 = 0xFFFF (Z); - call _set_rtc_istat - - P0.H = hi(PLL_CTL); - P0.L = lo(PLL_CTL); - R0 = W[P0](z); - BITSET (R0, 5); - W[P0] = R0.L; - - call _test_pll_locked; - - SSYNC; - IDLE; - - call _unset_dram_srfs; - - call _test_pll_locked; - - R0 = IWR_ENABLE(0); - R1 = IWR_DISABLE_ALL; - R2 = IWR_DISABLE_ALL; - - call _set_sic_iwr; - - P0.H = hi(PLL_CTL); - P0.L = lo(PLL_CTL); - R0 = w[p0](z); - BITCLR (R0, 3); - BITCLR (R0, 5); - BITCLR (R0, 8); - w[p0] = R0; - IDLE; - call _test_pll_locked; - - STI R4; - - RETS = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; -ENDPROC(_deep_sleep) - ENTRY(_sleep_deeper) [--SP] = ( R7:0, P5:0 ); [--SP] = RETS; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index eceb484d90f9..117c01c2c6b0 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -158,14 +158,16 @@ ENTRY(_ex_single_step) cc = r7 == r6; if cc jump _bfin_return_from_exception; +#ifdef CONFIG_KGDB /* Don't do single step in hardware exception handler */ p5.l = lo(IPEND); p5.h = hi(IPEND); r6 = [p5]; + cc = bittst(r6, 4); + if cc jump _bfin_return_from_exception; cc = bittst(r6, 5); if cc jump _bfin_return_from_exception; -#ifdef CONFIG_KGDB /* skip single step if current interrupt priority is higher than * that of the first instruction, from which gdb starts single step */ r6 >>= 6; @@ -186,17 +188,27 @@ ENTRY(_ex_single_step) if cc jump .Ldo_single_step; r6 += -1; cc = r6 < r7; - if cc jump _bfin_return_from_exception; + if cc jump 1f; .Ldo_single_step: -#endif - +#else /* If we were in user mode, do the single step normally. */ + p5.l = lo(IPEND); + p5.h = hi(IPEND); r6 = [p5]; r7 = 0xffe0 (z); r7 = r7 & r6; cc = r7 == 0; - if cc jump 1f; + if !cc jump 1f; +#endif + /* Single stepping only a single instruction, so clear the trace + * bit here. */ + r7 = syscfg; + bitclr (r7, 0); + syscfg = R7; + jump _ex_trap_c; + +1: /* * We were in an interrupt handler. By convention, all of them save * SYSCFG with their first instruction, so by checking whether our @@ -224,15 +236,11 @@ ENTRY(_ex_single_step) cc = R7 == R6; if !cc jump _bfin_return_from_exception; -1: - /* Single stepping only a single instruction, so clear the trace - * bit here. */ r7 = syscfg; bitclr (r7, 0); syscfg = R7; - jump _ex_trap_c; - + /* Fall through to _bfin_return_from_exception. */ ENDPROC(_ex_single_step) ENTRY(_bfin_return_from_exception) @@ -1414,6 +1422,12 @@ ENTRY(_sys_call_table) .long _sys_semtimedop .long _sys_timerfd_settime .long _sys_timerfd_gettime + .long _sys_signalfd4 /* 360 */ + .long _sys_eventfd2 + .long _sys_epoll_create1 + .long _sys_dup3 + .long _sys_pipe2 + .long _sys_inotify_init1 /* 365 */ .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S new file mode 100644 index 000000000000..191b4e974c4b --- /dev/null +++ b/arch/blackfin/mach-common/head.S @@ -0,0 +1,207 @@ +/* + * Common Blackfin startup code + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/blackfin.h> +#include <asm/thread_info.h> +#include <asm/trace.h> + +__INIT + +#define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) + +ENTRY(__start) + /* R0: argument of command line string, passed from uboot, save it */ + R7 = R0; + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif + SYSCFG = R0; + R0 = 0; + + /* Clear Out All the data and pointer Registers */ + R1 = R0; + R2 = R0; + R3 = R0; + R4 = R0; + R5 = R0; + R6 = R0; + + P0 = R0; + P1 = R0; + P2 = R0; + P3 = R0; + P4 = R0; + P5 = R0; + + LC0 = r0; + LC1 = r0; + L0 = r0; + L1 = r0; + L2 = r0; + L3 = r0; + + /* Clear Out All the DAG Registers */ + B0 = r0; + B1 = r0; + B2 = r0; + B3 = r0; + + I0 = r0; + I1 = r0; + I2 = r0; + I3 = r0; + + M0 = r0; + M1 = r0; + M2 = r0; + M3 = r0; + + trace_buffer_init(p0,r0); + P0 = R1; + R0 = R1; + + /* Turn off the icache */ + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); + R1 = [p0]; + R0 = ~ENICPLB; + R0 = R0 & R1; + [p0] = R0; + SSYNC; + + /* Turn off the dcache */ + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); + R1 = [p0]; + R0 = ~ENDCPLB; + R0 = R0 & R1; + [p0] = R0; + SSYNC; + + /* Save RETX, in case of doublefault */ + p0.l = ___retx; + p0.h = ___retx; + R0 = RETX; + [P0] = R0; + + /* Initialize stack pointer */ + sp.l = lo(INITIAL_STACK); + sp.h = hi(INITIAL_STACK); + fp = sp; + usp = sp; + +#ifdef CONFIG_EARLY_PRINTK + call _init_early_exception_vectors; +#endif + + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ + call _bf53x_relocate_l1_mem; +#ifdef CONFIG_BFIN_KERNEL_CLOCK + call _start_dma_code; +#endif + + /* This section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* EVT15 = _real_start */ + + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + csync; + + p0.l = lo(IMASK); + p0.h = hi(IMASK); + p1.l = IMASK_IVG15; + p1.h = 0x0; + [p0] = p1; + csync; + + raise 15; + p0.l = .LWAIT_HERE; + p0.h = .LWAIT_HERE; + reti = p0; +#if ANOMALY_05000281 + nop; nop; nop; +#endif + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; +ENDPROC(__start) + +/* A little BF561 glue ... */ +#ifndef WDOG_CTL +# define WDOG_CTL WDOGA_CTL +#endif + +ENTRY(_real_start) + /* Enable nested interrupts */ + [--sp] = reti; + + /* watchdog off for now */ + p0.l = lo(WDOG_CTL); + p0.h = hi(WDOG_CTL); + r0 = 0xAD6(z); + w[p0] = r0; + ssync; + + /* Zero out the bss region + * Note: this will fail if bss is 0 bytes ... + */ + r0 = 0 (z); + r1.l = ___bss_start; + r1.h = ___bss_start; + r2.l = ___bss_stop; + r2.h = ___bss_stop; + r2 = r2 - r1; + r2 >>= 2; + p1 = r1; + p2 = r2; + lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; +.L_clear_bss: + [p1++] = r0; + + /* In case there is a NULL pointer reference, + * zero out region before stext + */ + p1 = r0; + r2.l = __stext; + r2.h = __stext; + r2 >>= 2; + p2 = r2; + lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; +.L_clear_zero: + [p1++] = r0; + + /* Pass the u-boot arguments to the global value command line */ + R0 = R7; + call _cmdline_init; + + /* Load the current thread pointer and stack */ + sp.l = _init_thread_union; + sp.h = _init_thread_union; + p1 = THREAD_SIZE (z); + sp = sp + p1; + usp = sp; + fp = sp; + jump.l _start_kernel; +ENDPROC(_real_start) + +__FINIT diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 64d746114e4b..62f8883a5c27 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -71,6 +71,7 @@ atomic_t num_spurious; #ifdef CONFIG_PM unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */ +unsigned vr_wakeup; #endif struct ivgx { @@ -184,17 +185,56 @@ static void bfin_internal_unmask_irq(unsigned int irq) #ifdef CONFIG_PM int bfin_internal_set_wake(unsigned int irq, unsigned int state) { - unsigned bank, bit; + unsigned bank, bit, wakeup = 0; unsigned long flags; bank = SIC_SYSIRQ(irq) / 32; bit = SIC_SYSIRQ(irq) % 32; + switch (irq) { +#ifdef IRQ_RTC + case IRQ_RTC: + wakeup |= WAKE; + break; +#endif +#ifdef IRQ_CAN0_RX + case IRQ_CAN0_RX: + wakeup |= CANWE; + break; +#endif +#ifdef IRQ_CAN1_RX + case IRQ_CAN1_RX: + wakeup |= CANWE; + break; +#endif +#ifdef IRQ_USB_INT0 + case IRQ_USB_INT0: + wakeup |= USBWE; + break; +#endif +#ifdef IRQ_KEY + case IRQ_KEY: + wakeup |= KPADWE; + break; +#endif +#ifdef IRQ_CNT + case IRQ_CNT: + wakeup |= ROTWE; + break; +#endif + default: + break; + } + local_irq_save(flags); - if (state) + if (state) { bfin_sic_iwr[bank] |= (1 << bit); - else + vr_wakeup |= wakeup; + + } else { bfin_sic_iwr[bank] &= ~(1 << bit); + vr_wakeup &= ~wakeup; + } local_irq_restore(flags); @@ -943,6 +983,11 @@ int __init init_arch_irq(void) local_irq_disable(); +#if defined(CONFIG_BF527) || defined(CONFIG_BF536) || defined(CONFIG_BF537) + /* Clear EMAC Interrupt Status bits so we can demux it later */ + bfin_write_EMAC_SYSTAT(-1); +#endif + #ifdef CONFIG_BF54x # ifdef CONFIG_PINTx_REASSIGN pint[0]->assign = CONFIG_PINT0_ASSIGN; @@ -1028,13 +1073,22 @@ int __init init_arch_irq(void) IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) - bfin_write_SIC_IWR0(IWR_ENABLE_ALL); - bfin_write_SIC_IWR1(IWR_ENABLE_ALL); + bfin_write_SIC_IWR0(IWR_DISABLE_ALL); +#if defined(CONFIG_BF52x) + /* BF52x system reset does not properly reset SIC_IWR1 which + * will screw up the bootrom as it relies on MDMA0/1 waking it + * up from IDLE instructions. See this report for more info: + * http://blackfin.uclinux.org/gf/tracker/4323 + */ + bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); +#else + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); +#endif # ifdef CONFIG_BF54x - bfin_write_SIC_IWR2(IWR_ENABLE_ALL); + bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else - bfin_write_SIC_IWR(IWR_ENABLE_ALL); + bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif return 0; diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S index 30b887e67dd6..9daf01201e9f 100644 --- a/arch/blackfin/mach-common/lock.S +++ b/arch/blackfin/mach-common/lock.S @@ -28,13 +28,10 @@ */ #include <linux/linkage.h> -#include <asm/cplb.h> #include <asm/blackfin.h> .text -#ifdef CONFIG_BFIN_ICACHE_LOCK - /* When you come here, it is assumed that * R0 - Which way to be locked */ @@ -189,18 +186,38 @@ ENTRY(_cache_lock) RTS; ENDPROC(_cache_lock) -#endif /* BFIN_ICACHE_LOCK */ - -/* Return the ILOC bits of IMEM_CONTROL +/* Invalidate the Entire Instruction cache by + * disabling IMC bit */ +ENTRY(_invalidate_entire_icache) + [--SP] = ( R7:5); -ENTRY(_read_iloc) - P1.H = HI(IMEM_CONTROL); - P1.L = LO(IMEM_CONTROL); - R1 = 0xF; - R0 = [P1]; - R0 = R0 >> 3; - R0 = R0 & R1; + P0.L = LO(IMEM_CONTROL); + P0.H = HI(IMEM_CONTROL); + R7 = [P0]; + + /* Clear the IMC bit , All valid bits in the instruction + * cache are set to the invalid state + */ + BITCLR(R7,IMC_P); + CLI R6; + SSYNC; /* SSYNC required before invalidating cache. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + /* Configures the instruction cache agian */ + R6 = (IMC | ENICPLB); + R7 = R7 | R6; + + CLI R6; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + ( R7:5) = [SP++]; RTS; -ENDPROC(_read_iloc) +ENDPROC(_invalidate_entire_icache) diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 4fe6a2366b13..e28c6af1f415 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -83,13 +83,22 @@ void bfin_pm_suspend_standby_enter(void) bfin_pm_standby_restore(); #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) - bfin_write_SIC_IWR0(IWR_ENABLE_ALL); - bfin_write_SIC_IWR1(IWR_ENABLE_ALL); + bfin_write_SIC_IWR0(IWR_DISABLE_ALL); +#if defined(CONFIG_BF52x) + /* BF52x system reset does not properly reset SIC_IWR1 which + * will screw up the bootrom as it relies on MDMA0/1 waking it + * up from IDLE instructions. See this report for more info: + * http://blackfin.uclinux.org/gf/tracker/4323 + */ + bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); +#else + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); +#endif # ifdef CONFIG_BF54x - bfin_write_SIC_IWR2(IWR_ENABLE_ALL); + bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else - bfin_write_SIC_IWR(IWR_ENABLE_ALL); + bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif local_irq_restore(flags); @@ -229,28 +238,12 @@ int bfin_pm_suspend_mem_enter(void) wakeup = bfin_read_VR_CTL() & ~FREQ; wakeup |= SCKELOW; - /* FIXME: merge this somehow with set_irq_wake */ -#ifdef CONFIG_PM_BFIN_WAKE_RTC - wakeup |= WAKE; -#endif #ifdef CONFIG_PM_BFIN_WAKE_PH6 wakeup |= PHYWE; #endif -#ifdef CONFIG_PM_BFIN_WAKE_CAN - wakeup |= CANWE; -#endif #ifdef CONFIG_PM_BFIN_WAKE_GP wakeup |= GPWE; #endif -#ifdef CONFIG_PM_BFIN_WAKE_USB - wakeup |= USBWE; -#endif -#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD - wakeup |= KPADWE; -#endif -#ifdef CONFIG_PM_BFIN_WAKE_ROTARY - wakeup |= ROTWE; -#endif local_irq_save(flags); @@ -268,7 +261,7 @@ int bfin_pm_suspend_mem_enter(void) icache_disable(); bf53x_suspend_l1_mem(memptr); - do_hibernate(wakeup); /* Goodbye */ + do_hibernate(wakeup | vr_wakeup); /* Goodbye */ bf53x_resume_l1_mem(memptr); diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index 5af3c31c9365..9d2be43ac3da 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -66,7 +66,7 @@ static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head; static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head; #endif -#ifdef L2_LENGTH +#if L2_LENGTH != 0 static struct sram_piece free_l2_sram_head, used_l2_sram_head; #endif @@ -175,7 +175,7 @@ static void __init l1_inst_sram_init(void) static void __init l2_sram_init(void) { -#ifdef L2_LENGTH +#if L2_LENGTH != 0 free_l2_sram_head.next = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); if (!free_l2_sram_head.next) { @@ -367,7 +367,7 @@ int sram_free(const void *addr) && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH)) return l1_data_B_sram_free(addr); #endif -#ifdef L2_LENGTH +#if L2_LENGTH != 0 else if (addr >= (void *)L2_START && addr < (void *)(L2_START + L2_LENGTH)) return l2_sram_free(addr); @@ -604,7 +604,7 @@ int l1sram_free(const void *addr) void *l2_sram_alloc(size_t size) { -#ifdef L2_LENGTH +#if L2_LENGTH != 0 unsigned flags; void *addr; @@ -640,7 +640,7 @@ EXPORT_SYMBOL(l2_sram_zalloc); int l2_sram_free(const void *addr) { -#ifdef L2_LENGTH +#if L2_LENGTH != 0 unsigned flags; int ret; @@ -779,7 +779,7 @@ static int sram_proc_read(char *buf, char **start, off_t offset, int count, &free_l1_inst_sram_head, &used_l1_inst_sram_head)) goto not_done; #endif -#ifdef L2_LENGTH +#if L2_LENGTH != 0 if (_sram_proc_read(buf, &len, count, "L2", &free_l2_sram_head, &used_l2_sram_head)) goto not_done; diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild new file mode 100644 index 000000000000..c68e1680da01 --- /dev/null +++ b/arch/h8300/include/asm/Kbuild @@ -0,0 +1 @@ +include include/asm-generic/Kbuild.asm diff --git a/arch/h8300/include/asm/a.out.h b/arch/h8300/include/asm/a.out.h new file mode 100644 index 000000000000..ded780f0a492 --- /dev/null +++ b/arch/h8300/include/asm/a.out.h @@ -0,0 +1,20 @@ +#ifndef __H8300_A_OUT_H__ +#define __H8300_A_OUT_H__ + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* __H8300_A_OUT_H__ */ diff --git a/arch/h8300/include/asm/atomic.h b/arch/h8300/include/asm/atomic.h new file mode 100644 index 000000000000..b4cf0ea97ede --- /dev/null +++ b/arch/h8300/include/asm/atomic.h @@ -0,0 +1,144 @@ +#ifndef __ARCH_H8300_ATOMIC__ +#define __ARCH_H8300_ATOMIC__ + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +typedef struct { int counter; } atomic_t; +#define ATOMIC_INIT(i) { (i) } + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v, i) (((v)->counter) = i) + +#include <asm/system.h> +#include <linux/kernel.h> + +static __inline__ int atomic_add_return(int i, atomic_t *v) +{ + int ret,flags; + local_irq_save(flags); + ret = v->counter += i; + local_irq_restore(flags); + return ret; +} + +#define atomic_add(i, v) atomic_add_return(i, v) +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) + +static __inline__ int atomic_sub_return(int i, atomic_t *v) +{ + int ret,flags; + local_irq_save(flags); + ret = v->counter -= i; + local_irq_restore(flags); + return ret; +} + +#define atomic_sub(i, v) atomic_sub_return(i, v) +#define atomic_sub_and_test(i,v) (atomic_sub_return(i, v) == 0) + +static __inline__ int atomic_inc_return(atomic_t *v) +{ + int ret,flags; + local_irq_save(flags); + v->counter++; + ret = v->counter; + local_irq_restore(flags); + return ret; +} + +#define atomic_inc(v) atomic_inc_return(v) + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +static __inline__ int atomic_dec_return(atomic_t *v) +{ + int ret,flags; + local_irq_save(flags); + --v->counter; + ret = v->counter; + local_irq_restore(flags); + return ret; +} + +#define atomic_dec(v) atomic_dec_return(v) + +static __inline__ int atomic_dec_and_test(atomic_t *v) +{ + int ret,flags; + local_irq_save(flags); + --v->counter; + ret = v->counter; + local_irq_restore(flags); + return ret == 0; +} + +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + local_irq_restore(flags); + return ret; +} + +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (ret != u) + v->counter += a; + local_irq_restore(flags); + return ret != u; +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v) +{ + __asm__ __volatile__("stc ccr,r1l\n\t" + "orc #0x80,ccr\n\t" + "mov.l %0,er0\n\t" + "and.l %1,er0\n\t" + "mov.l er0,%0\n\t" + "ldc r1l,ccr" + : "=m" (*v) : "g" (~(mask)) :"er0","er1"); +} + +static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v) +{ + __asm__ __volatile__("stc ccr,r1l\n\t" + "orc #0x80,ccr\n\t" + "mov.l %0,er0\n\t" + "or.l %1,er0\n\t" + "mov.l er0,%0\n\t" + "ldc r1l,ccr" + : "=m" (*v) : "g" (mask) :"er0","er1"); +} + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include <asm-generic/atomic.h> +#endif /* __ARCH_H8300_ATOMIC __ */ diff --git a/arch/h8300/include/asm/auxvec.h b/arch/h8300/include/asm/auxvec.h new file mode 100644 index 000000000000..1d36fe38b088 --- /dev/null +++ b/arch/h8300/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMH8300_AUXVEC_H +#define __ASMH8300_AUXVEC_H + +#endif diff --git a/arch/h8300/include/asm/bitops.h b/arch/h8300/include/asm/bitops.h new file mode 100644 index 000000000000..cb18e3b0aa94 --- /dev/null +++ b/arch/h8300/include/asm/bitops.h @@ -0,0 +1,212 @@ +#ifndef _H8300_BITOPS_H +#define _H8300_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + * Copyright 2002, Yoshinori Sato + */ + +#include <linux/compiler.h> +#include <asm/system.h> + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +/* + * Function prototypes to keep gcc -Wall happy + */ + +/* + * ffz = Find First Zero in word. Undefined if no zero exists, + * so code should check against ~0UL first.. + */ +static __inline__ unsigned long ffz(unsigned long word) +{ + unsigned long result; + + result = -1; + __asm__("1:\n\t" + "shlr.l %2\n\t" + "adds #1,%0\n\t" + "bcs 1b" + : "=r" (result) + : "0" (result),"r" (word)); + return result; +} + +#define H8300_GEN_BITOP_CONST(OP,BIT) \ + case BIT: \ + __asm__(OP " #" #BIT ",@%0"::"r"(b_addr):"memory"); \ + break; + +#define H8300_GEN_BITOP(FNAME,OP) \ +static __inline__ void FNAME(int nr, volatile unsigned long* addr) \ +{ \ + volatile unsigned char *b_addr; \ + b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \ + if (__builtin_constant_p(nr)) { \ + switch(nr & 7) { \ + H8300_GEN_BITOP_CONST(OP,0) \ + H8300_GEN_BITOP_CONST(OP,1) \ + H8300_GEN_BITOP_CONST(OP,2) \ + H8300_GEN_BITOP_CONST(OP,3) \ + H8300_GEN_BITOP_CONST(OP,4) \ + H8300_GEN_BITOP_CONST(OP,5) \ + H8300_GEN_BITOP_CONST(OP,6) \ + H8300_GEN_BITOP_CONST(OP,7) \ + } \ + } else { \ + __asm__(OP " %w0,@%1"::"r"(nr),"r"(b_addr):"memory"); \ + } \ +} + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +H8300_GEN_BITOP(set_bit ,"bset") +H8300_GEN_BITOP(clear_bit ,"bclr") +H8300_GEN_BITOP(change_bit,"bnot") +#define __set_bit(nr,addr) set_bit((nr),(addr)) +#define __clear_bit(nr,addr) clear_bit((nr),(addr)) +#define __change_bit(nr,addr) change_bit((nr),(addr)) + +#undef H8300_GEN_BITOP +#undef H8300_GEN_BITOP_CONST + +static __inline__ int test_bit(int nr, const unsigned long* addr) +{ + return (*((volatile unsigned char *)addr + + ((nr >> 3) ^ 3)) & (1UL << (nr & 7))) != 0; +} + +#define __test_bit(nr, addr) test_bit(nr, addr) + +#define H8300_GEN_TEST_BITOP_CONST_INT(OP,BIT) \ + case BIT: \ + __asm__("stc ccr,%w1\n\t" \ + "orc #0x80,ccr\n\t" \ + "bld #" #BIT ",@%4\n\t" \ + OP " #" #BIT ",@%4\n\t" \ + "rotxl.l %0\n\t" \ + "ldc %w1,ccr" \ + : "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr) \ + : "0" (retval),"r" (b_addr) \ + : "memory"); \ + break; + +#define H8300_GEN_TEST_BITOP_CONST(OP,BIT) \ + case BIT: \ + __asm__("bld #" #BIT ",@%3\n\t" \ + OP " #" #BIT ",@%3\n\t" \ + "rotxl.l %0\n\t" \ + : "=r"(retval),"=m"(*b_addr) \ + : "0" (retval),"r" (b_addr) \ + : "memory"); \ + break; + +#define H8300_GEN_TEST_BITOP(FNNAME,OP) \ +static __inline__ int FNNAME(int nr, volatile void * addr) \ +{ \ + int retval = 0; \ + char ccrsave; \ + volatile unsigned char *b_addr; \ + b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \ + if (__builtin_constant_p(nr)) { \ + switch(nr & 7) { \ + H8300_GEN_TEST_BITOP_CONST_INT(OP,0) \ + H8300_GEN_TEST_BITOP_CONST_INT(OP,1) \ + H8300_GEN_TEST_BITOP_CONST_INT(OP,2) \ + H8300_GEN_TEST_BITOP_CONST_INT(OP,3) \ + H8300_GEN_TEST_BITOP_CONST_INT(OP,4) \ + H8300_GEN_TEST_BITOP_CONST_INT(OP,5) \ + H8300_GEN_TEST_BITOP_CONST_INT(OP,6) \ + H8300_GEN_TEST_BITOP_CONST_INT(OP,7) \ + } \ + } else { \ + __asm__("stc ccr,%w1\n\t" \ + "orc #0x80,ccr\n\t" \ + "btst %w5,@%4\n\t" \ + OP " %w5,@%4\n\t" \ + "beq 1f\n\t" \ + "inc.l #1,%0\n" \ + "1:\n\t" \ + "ldc %w1,ccr" \ + : "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr) \ + : "0" (retval),"r" (b_addr),"r"(nr) \ + : "memory"); \ + } \ + return retval; \ +} \ + \ +static __inline__ int __ ## FNNAME(int nr, volatile void * addr) \ +{ \ + int retval = 0; \ + volatile unsigned char *b_addr; \ + b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \ + if (__builtin_constant_p(nr)) { \ + switch(nr & 7) { \ + H8300_GEN_TEST_BITOP_CONST(OP,0) \ + H8300_GEN_TEST_BITOP_CONST(OP,1) \ + H8300_GEN_TEST_BITOP_CONST(OP,2) \ + H8300_GEN_TEST_BITOP_CONST(OP,3) \ + H8300_GEN_TEST_BITOP_CONST(OP,4) \ + H8300_GEN_TEST_BITOP_CONST(OP,5) \ + H8300_GEN_TEST_BITOP_CONST(OP,6) \ + H8300_GEN_TEST_BITOP_CONST(OP,7) \ + } \ + } else { \ + __asm__("btst %w4,@%3\n\t" \ + OP " %w4,@%3\n\t" \ + "beq 1f\n\t" \ + "inc.l #1,%0\n" \ + "1:" \ + : "=r"(retval),"=m"(*b_addr) \ + : "0" (retval),"r" (b_addr),"r"(nr) \ + : "memory"); \ + } \ + return retval; \ +} + +H8300_GEN_TEST_BITOP(test_and_set_bit, "bset") +H8300_GEN_TEST_BITOP(test_and_clear_bit, "bclr") +H8300_GEN_TEST_BITOP(test_and_change_bit,"bnot") +#undef H8300_GEN_TEST_BITOP_CONST +#undef H8300_GEN_TEST_BITOP_CONST_INT +#undef H8300_GEN_TEST_BITOP + +#include <asm-generic/bitops/ffs.h> + +static __inline__ unsigned long __ffs(unsigned long word) +{ + unsigned long result; + + result = -1; + __asm__("1:\n\t" + "shlr.l %2\n\t" + "adds #1,%0\n\t" + "bcc 1b" + : "=r" (result) + : "0"(result),"r"(word)); + return result; +} + +#include <asm-generic/bitops/find.h> +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/hweight.h> +#include <asm-generic/bitops/lock.h> +#include <asm-generic/bitops/ext2-non-atomic.h> +#include <asm-generic/bitops/ext2-atomic.h> +#include <asm-generic/bitops/minix.h> + +#endif /* __KERNEL__ */ + +#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/fls64.h> + +#endif /* _H8300_BITOPS_H */ diff --git a/arch/h8300/include/asm/bootinfo.h b/arch/h8300/include/asm/bootinfo.h new file mode 100644 index 000000000000..5bed7e7aac0a --- /dev/null +++ b/arch/h8300/include/asm/bootinfo.h @@ -0,0 +1,2 @@ + +/* Nothing for h8300 */ diff --git a/arch/h8300/include/asm/bug.h b/arch/h8300/include/asm/bug.h new file mode 100644 index 000000000000..edddf5b086e5 --- /dev/null +++ b/arch/h8300/include/asm/bug.h @@ -0,0 +1,4 @@ +#ifndef _H8300_BUG_H +#define _H8300_BUG_H +#include <asm-generic/bug.h> +#endif diff --git a/arch/h8300/include/asm/bugs.h b/arch/h8300/include/asm/bugs.h new file mode 100644 index 000000000000..1cb4afba6eb1 --- /dev/null +++ b/arch/h8300/include/asm/bugs.h @@ -0,0 +1,16 @@ +/* + * include/asm-h8300/bugs.h + * + * Copyright (C) 1994 Linus Torvalds + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +static void check_bugs(void) +{ +} diff --git a/arch/h8300/include/asm/byteorder.h b/arch/h8300/include/asm/byteorder.h new file mode 100644 index 000000000000..36e597d61619 --- /dev/null +++ b/arch/h8300/include/asm/byteorder.h @@ -0,0 +1,13 @@ +#ifndef _H8300_BYTEORDER_H +#define _H8300_BYTEORDER_H + +#include <asm/types.h> + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#include <linux/byteorder/big_endian.h> + +#endif /* _H8300_BYTEORDER_H */ diff --git a/arch/h8300/include/asm/cache.h b/arch/h8300/include/asm/cache.h new file mode 100644 index 000000000000..c6350283649d --- /dev/null +++ b/arch/h8300/include/asm/cache.h @@ -0,0 +1,12 @@ +#ifndef __ARCH_H8300_CACHE_H +#define __ARCH_H8300_CACHE_H + +/* bytes per L1 cache line */ +#define L1_CACHE_BYTES 4 + +/* m68k-elf-gcc 2.95.2 doesn't like these */ + +#define __cacheline_aligned +#define ____cacheline_aligned + +#endif diff --git a/arch/h8300/include/asm/cachectl.h b/arch/h8300/include/asm/cachectl.h new file mode 100644 index 000000000000..c464022d8e26 --- /dev/null +++ b/arch/h8300/include/asm/cachectl.h @@ -0,0 +1,14 @@ +#ifndef _H8300_CACHECTL_H +#define _H8300_CACHECTL_H + +/* Definitions for the cacheflush system call. */ + +#define FLUSH_SCOPE_LINE 0 /* Flush a cache line */ +#define FLUSH_SCOPE_PAGE 0 /* Flush a page */ +#define FLUSH_SCOPE_ALL 0 /* Flush the whole cache -- superuser only */ + +#define FLUSH_CACHE_DATA 0 /* Writeback and flush data cache */ +#define FLUSH_CACHE_INSN 0 /* Flush instruction cache */ +#define FLUSH_CACHE_BOTH 0 /* Flush both caches */ + +#endif /* _H8300_CACHECTL_H */ diff --git a/arch/h8300/include/asm/cacheflush.h b/arch/h8300/include/asm/cacheflush.h new file mode 100644 index 000000000000..5ffdca217b95 --- /dev/null +++ b/arch/h8300/include/asm/cacheflush.h @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2002, Yoshinori Sato <ysato@users.sourceforge.jp> + */ + +#ifndef _ASM_H8300_CACHEFLUSH_H +#define _ASM_H8300_CACHEFLUSH_H + +/* + * Cache handling functions + * No Cache memory all dummy functions + */ + +#define flush_cache_all() +#define flush_cache_mm(mm) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma,a,b) +#define flush_cache_page(vma,p,pfn) +#define flush_dcache_page(page) +#define flush_dcache_mmap_lock(mapping) +#define flush_dcache_mmap_unlock(mapping) +#define flush_icache() +#define flush_icache_page(vma,page) +#define flush_icache_range(start,len) +#define flush_cache_vmap(start, end) +#define flush_cache_vunmap(start, end) +#define cache_push_v(vaddr,len) +#define cache_push(paddr,len) +#define cache_clear(paddr,len) + +#define flush_dcache_range(a,b) + +#define flush_icache_user_range(vma,page,addr,len) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +#endif /* _ASM_H8300_CACHEFLUSH_H */ diff --git a/arch/h8300/include/asm/checksum.h b/arch/h8300/include/asm/checksum.h new file mode 100644 index 000000000000..98724e12508c --- /dev/null +++ b/arch/h8300/include/asm/checksum.h @@ -0,0 +1,102 @@ +#ifndef _H8300_CHECKSUM_H +#define _H8300_CHECKSUM_H + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum); + + +/* + * the same as csum_partial_copy, but copies from user space. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *csum_err); + +__sum16 ip_fast_csum(const void *iph, unsigned int ihl); + + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + __asm__("mov.l %0,er0\n\t" + "add.w e0,r0\n\t" + "xor.w e0,e0\n\t" + "rotxl.w e0\n\t" + "add.w e0,r0\n\t" + "sub.w e0,e0\n\t" + "mov.l er0,%0" + : "=r"(sum) + : "0"(sum) + : "er0"); + return (__force __sum16)~sum; +} + + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + __asm__ ("sub.l er0,er0\n\t" + "add.l %2,%0\n\t" + "addx #0,r0l\n\t" + "add.l %3,%0\n\t" + "addx #0,r0l\n\t" + "add.l %4,%0\n\t" + "addx #0,r0l\n\t" + "add.l er0,%0\n\t" + "bcc 1f\n\t" + "inc.l #1,%0\n" + "1:" + : "=&r" (sum) + : "0" (sum), "r" (daddr), "r" (saddr), "r" (len + proto) + :"er0"); + return sum; +} + +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +extern __sum16 ip_compute_csum(const void *buff, int len); + +#endif /* _H8300_CHECKSUM_H */ diff --git a/arch/h8300/include/asm/cputime.h b/arch/h8300/include/asm/cputime.h new file mode 100644 index 000000000000..092e187c7b08 --- /dev/null +++ b/arch/h8300/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __H8300_CPUTIME_H +#define __H8300_CPUTIME_H + +#include <asm-generic/cputime.h> + +#endif /* __H8300_CPUTIME_H */ diff --git a/arch/h8300/include/asm/current.h b/arch/h8300/include/asm/current.h new file mode 100644 index 000000000000..57d74ee55a14 --- /dev/null +++ b/arch/h8300/include/asm/current.h @@ -0,0 +1,25 @@ +#ifndef _H8300_CURRENT_H +#define _H8300_CURRENT_H +/* + * current.h + * (C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com> + * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) + * + * rather than dedicate a register (as the m68k source does), we + * just keep a global, we should probably just change it all to be + * current and lose _current_task. + */ + +#include <linux/thread_info.h> +#include <asm/thread_info.h> + +struct task_struct; + +static inline struct task_struct *get_current(void) +{ + return(current_thread_info()->task); +} + +#define current get_current() + +#endif /* _H8300_CURRENT_H */ diff --git a/arch/h8300/include/asm/dbg.h b/arch/h8300/include/asm/dbg.h new file mode 100644 index 000000000000..2c6d1cbcf736 --- /dev/null +++ b/arch/h8300/include/asm/dbg.h @@ -0,0 +1,2 @@ +#define DEBUG 1 +#define BREAK asm volatile ("trap #3") diff --git a/arch/h8300/include/asm/delay.h b/arch/h8300/include/asm/delay.h new file mode 100644 index 000000000000..743beba70f82 --- /dev/null +++ b/arch/h8300/include/asm/delay.h @@ -0,0 +1,38 @@ +#ifndef _H8300_DELAY_H +#define _H8300_DELAY_H + +#include <asm/param.h> + +/* + * Copyright (C) 2002 Yoshinori Sato <ysato@sourceforge.jp> + * + * Delay routines, using a pre-computed "loops_per_second" value. + */ + +static inline void __delay(unsigned long loops) +{ + __asm__ __volatile__ ("1:\n\t" + "dec.l #1,%0\n\t" + "bne 1b" + :"=r" (loops):"0"(loops)); +} + +/* + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ + +extern unsigned long loops_per_jiffy; + +static inline void udelay(unsigned long usecs) +{ + usecs *= 4295; /* 2**32 / 1000000 */ + usecs /= (loops_per_jiffy*HZ); + if (usecs) + __delay(usecs); +} + +#endif /* _H8300_DELAY_H */ diff --git a/arch/h8300/include/asm/device.h b/arch/h8300/include/asm/device.h new file mode 100644 index 000000000000..d8f9872b0e2d --- /dev/null +++ b/arch/h8300/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include <asm-generic/device.h> + diff --git a/arch/h8300/include/asm/div64.h b/arch/h8300/include/asm/div64.h new file mode 100644 index 000000000000..6cd978cefb28 --- /dev/null +++ b/arch/h8300/include/asm/div64.h @@ -0,0 +1 @@ +#include <asm-generic/div64.h> diff --git a/arch/h8300/include/asm/dma.h b/arch/h8300/include/asm/dma.h new file mode 100644 index 000000000000..3edbaaaedf5b --- /dev/null +++ b/arch/h8300/include/asm/dma.h @@ -0,0 +1,15 @@ +#ifndef _H8300_DMA_H +#define _H8300_DMA_H + + +/* + * Set number of channels of DMA on ColdFire for different implementations. + */ +#define MAX_DMA_CHANNELS 0 +#define MAX_DMA_ADDRESS PAGE_OFFSET + +/* These are in kernel/dma.c: */ +extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */ +extern void free_dma(unsigned int dmanr); /* release it again */ + +#endif /* _H8300_DMA_H */ diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h new file mode 100644 index 000000000000..a8b57d1f4128 --- /dev/null +++ b/arch/h8300/include/asm/elf.h @@ -0,0 +1,104 @@ +#ifndef __ASMH8300_ELF_H +#define __ASMH8300_ELF_H + +/* + * ELF register definitions.. + */ + +#include <asm/ptrace.h> +#include <asm/user.h> + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; +typedef unsigned long elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_H8_300) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2MSB +#define ELF_ARCH EM_H8_300 +#if defined(__H8300H__) +#define ELF_CORE_EFLAGS 0x810000 +#endif +#if defined(__H8300S__) +#define ELF_CORE_EFLAGS 0x820000 +#endif + +#define ELF_PLAT_INIT(_r) _r->er1 = 0 + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE 0xD0000000UL + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX) + +#define R_H8_NONE 0 +#define R_H8_DIR32 1 +#define R_H8_DIR32_28 2 +#define R_H8_DIR32_24 3 +#define R_H8_DIR32_16 4 +#define R_H8_DIR32U 6 +#define R_H8_DIR32U_28 7 +#define R_H8_DIR32U_24 8 +#define R_H8_DIR32U_20 9 +#define R_H8_DIR32U_16 10 +#define R_H8_DIR24 11 +#define R_H8_DIR24_20 12 +#define R_H8_DIR24_16 13 +#define R_H8_DIR24U 14 +#define R_H8_DIR24U_20 15 +#define R_H8_DIR24U_16 16 +#define R_H8_DIR16 17 +#define R_H8_DIR16U 18 +#define R_H8_DIR16S_32 19 +#define R_H8_DIR16S_28 20 +#define R_H8_DIR16S_24 21 +#define R_H8_DIR16S_20 22 +#define R_H8_DIR16S 23 +#define R_H8_DIR8 24 +#define R_H8_DIR8U 25 +#define R_H8_DIR8Z_32 26 +#define R_H8_DIR8Z_28 27 +#define R_H8_DIR8Z_24 28 +#define R_H8_DIR8Z_20 29 +#define R_H8_DIR8Z_16 30 +#define R_H8_PCREL16 31 +#define R_H8_PCREL8 32 +#define R_H8_BPOS 33 +#define R_H8_PCREL32 34 +#define R_H8_GOT32O 35 +#define R_H8_GOT16O 36 +#define R_H8_DIR16A8 59 +#define R_H8_DIR16R8 60 +#define R_H8_DIR24A8 61 +#define R_H8_DIR24R8 62 +#define R_H8_DIR32A16 63 +#define R_H8_ABS32 65 +#define R_H8_ABS32A16 127 + +#endif diff --git a/arch/h8300/include/asm/emergency-restart.h b/arch/h8300/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/h8300/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include <asm-generic/emergency-restart.h> + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/h8300/include/asm/errno.h b/arch/h8300/include/asm/errno.h new file mode 100644 index 000000000000..0c2f5641fdcc --- /dev/null +++ b/arch/h8300/include/asm/errno.h @@ -0,0 +1,6 @@ +#ifndef _H8300_ERRNO_H +#define _H8300_ERRNO_H + +#include <asm-generic/errno.h> + +#endif /* _H8300_ERRNO_H */ diff --git a/arch/h8300/include/asm/fb.h b/arch/h8300/include/asm/fb.h new file mode 100644 index 000000000000..c7df38030992 --- /dev/null +++ b/arch/h8300/include/asm/fb.h @@ -0,0 +1,12 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ +#include <linux/fb.h> + +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/h8300/include/asm/fcntl.h b/arch/h8300/include/asm/fcntl.h new file mode 100644 index 000000000000..1952cb2e3b06 --- /dev/null +++ b/arch/h8300/include/asm/fcntl.h @@ -0,0 +1,11 @@ +#ifndef _H8300_FCNTL_H +#define _H8300_FCNTL_H + +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ +#define O_LARGEFILE 0400000 + +#include <asm-generic/fcntl.h> + +#endif /* _H8300_FCNTL_H */ diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h new file mode 100644 index 000000000000..2a873508a9a1 --- /dev/null +++ b/arch/h8300/include/asm/flat.h @@ -0,0 +1,27 @@ +/* + * include/asm-h8300/flat.h -- uClinux flat-format executables + */ + +#ifndef __H8300_FLAT_H__ +#define __H8300_FLAT_H__ + +#define flat_stack_align(sp) /* nothing needed */ +#define flat_argvp_envp_on_stack() 1 +#define flat_old_ram_flag(flags) 1 +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_set_persistent(relval, p) 0 + +/* + * on the H8 a couple of the relocations have an instruction in the + * top byte. As there can only be 24bits of address space, we just + * always preserve that 8bits at the top, when it isn't an instruction + * is is 0 (davidm@snapgear.com) + */ + +#define flat_get_relocate_addr(rel) (rel) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) \ + (get_unaligned(rp) & ((flags & FLAT_FLAG_GOTPIC) ? 0xffffffff: 0x00ffffff)) +#define flat_put_addr_at_rp(rp, addr, rel) \ + put_unaligned (((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), rp) + +#endif /* __H8300_FLAT_H__ */ diff --git a/arch/h8300/include/asm/fpu.h b/arch/h8300/include/asm/fpu.h new file mode 100644 index 000000000000..4fc416e80bef --- /dev/null +++ b/arch/h8300/include/asm/fpu.h @@ -0,0 +1 @@ +/* Nothing do */ diff --git a/arch/h8300/include/asm/futex.h b/arch/h8300/include/asm/futex.h new file mode 100644 index 000000000000..6a332a9f099c --- /dev/null +++ b/arch/h8300/include/asm/futex.h @@ -0,0 +1,6 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include <asm-generic/futex.h> + +#endif diff --git a/arch/h8300/include/asm/gpio.h b/arch/h8300/include/asm/gpio.h new file mode 100644 index 000000000000..a714f0c0efbc --- /dev/null +++ b/arch/h8300/include/asm/gpio.h @@ -0,0 +1,52 @@ +#ifndef _H8300_GPIO_H +#define _H8300_GPIO_H + +#define H8300_GPIO_P1 0 +#define H8300_GPIO_P2 1 +#define H8300_GPIO_P3 2 +#define H8300_GPIO_P4 3 +#define H8300_GPIO_P5 4 +#define H8300_GPIO_P6 5 +#define H8300_GPIO_P7 6 +#define H8300_GPIO_P8 7 +#define H8300_GPIO_P9 8 +#define H8300_GPIO_PA 9 +#define H8300_GPIO_PB 10 +#define H8300_GPIO_PC 11 +#define H8300_GPIO_PD 12 +#define H8300_GPIO_PE 13 +#define H8300_GPIO_PF 14 +#define H8300_GPIO_PG 15 +#define H8300_GPIO_PH 16 + +#define H8300_GPIO_B7 0x80 +#define H8300_GPIO_B6 0x40 +#define H8300_GPIO_B5 0x20 +#define H8300_GPIO_B4 0x10 +#define H8300_GPIO_B3 0x08 +#define H8300_GPIO_B2 0x04 +#define H8300_GPIO_B1 0x02 +#define H8300_GPIO_B0 0x01 + +#define H8300_GPIO_INPUT 0 +#define H8300_GPIO_OUTPUT 1 + +#define H8300_GPIO_RESERVE(port, bits) \ + h8300_reserved_gpio(port, bits) + +#define H8300_GPIO_FREE(port, bits) \ + h8300_free_gpio(port, bits) + +#define H8300_GPIO_DDR(port, bit, dir) \ + h8300_set_gpio_dir(((port) << 8) | (bit), dir) + +#define H8300_GPIO_GETDIR(port, bit) \ + h8300_get_gpio_dir(((port) << 8) | (bit)) + +extern int h8300_reserved_gpio(int port, int bits); +extern int h8300_free_gpio(int port, int bits); +extern int h8300_set_gpio_dir(int port_bit, int dir); +extern int h8300_get_gpio_dir(int port_bit); +extern int h8300_init_gpio(void); + +#endif diff --git a/arch/h8300/include/asm/hardirq.h b/arch/h8300/include/asm/hardirq.h new file mode 100644 index 000000000000..9d7f7a7462b2 --- /dev/null +++ b/arch/h8300/include/asm/hardirq.h @@ -0,0 +1,28 @@ +#ifndef __H8300_HARDIRQ_H +#define __H8300_HARDIRQ_H + +#include <linux/kernel.h> +#include <linux/threads.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +extern void ack_bad_irq(unsigned int irq); + +#define HARDIRQ_BITS 8 + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +#endif diff --git a/arch/h8300/include/asm/hw_irq.h b/arch/h8300/include/asm/hw_irq.h new file mode 100644 index 000000000000..d75a5a1119e8 --- /dev/null +++ b/arch/h8300/include/asm/hw_irq.h @@ -0,0 +1 @@ +/* Do Nothing */ diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h new file mode 100644 index 000000000000..26dc6ccd9441 --- /dev/null +++ b/arch/h8300/include/asm/io.h @@ -0,0 +1,324 @@ +#ifndef _H8300_IO_H +#define _H8300_IO_H + +#ifdef __KERNEL__ + +#include <asm/virtconvert.h> + +#if defined(CONFIG_H83007) || defined(CONFIG_H83068) +#include <asm/regs306x.h> +#elif defined(CONFIG_H8S2678) +#include <asm/regs267x.h> +#else +#error UNKNOWN CPU TYPE +#endif + + +/* + * These are for ISA/PCI shared memory _only_ and should never be used + * on any other type of memory, including Zorro memory. They are meant to + * access the bus in the bus byte order which is little-endian!. + * + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the m68k architecture, we just read/write the + * memory location directly. + */ +/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates + * two accesses to memory, which may be undesireable for some devices. + */ + +/* + * swap functions are sometimes needed to interface little-endian hardware + */ + +static inline unsigned short _swapw(volatile unsigned short v) +{ +#ifndef H8300_IO_NOSWAP + unsigned short r; + __asm__("xor.b %w0,%x0\n\t" + "xor.b %x0,%w0\n\t" + "xor.b %w0,%x0" + :"=r"(r) + :"0"(v)); + return r; +#else + return v; +#endif +} + +static inline unsigned long _swapl(volatile unsigned long v) +{ +#ifndef H8300_IO_NOSWAP + unsigned long r; + __asm__("xor.b %w0,%x0\n\t" + "xor.b %x0,%w0\n\t" + "xor.b %w0,%x0\n\t" + "xor.w %e0,%f0\n\t" + "xor.w %f0,%e0\n\t" + "xor.w %e0,%f0\n\t" + "xor.b %w0,%x0\n\t" + "xor.b %x0,%w0\n\t" + "xor.b %w0,%x0" + :"=r"(r) + :"0"(v)); + return r; +#else + return v; +#endif +} + +#define readb(addr) \ + ({ unsigned char __v = \ + *(volatile unsigned char *)((unsigned long)(addr) & 0x00ffffff); \ + __v; }) +#define readw(addr) \ + ({ unsigned short __v = \ + *(volatile unsigned short *)((unsigned long)(addr) & 0x00ffffff); \ + __v; }) +#define readl(addr) \ + ({ unsigned long __v = \ + *(volatile unsigned long *)((unsigned long)(addr) & 0x00ffffff); \ + __v; }) + +#define writeb(b,addr) (void)((*(volatile unsigned char *) \ + ((unsigned long)(addr) & 0x00ffffff)) = (b)) +#define writew(b,addr) (void)((*(volatile unsigned short *) \ + ((unsigned long)(addr) & 0x00ffffff)) = (b)) +#define writel(b,addr) (void)((*(volatile unsigned long *) \ + ((unsigned long)(addr) & 0x00ffffff)) = (b)) +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) + +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +static inline int h8300_buswidth(unsigned int addr) +{ + return (*(volatile unsigned char *)ABWCR & (1 << ((addr >> 21) & 7))) == 0; +} + +static inline void io_outsb(unsigned int addr, const void *buf, int len) +{ + volatile unsigned char *ap_b = (volatile unsigned char *) addr; + volatile unsigned short *ap_w = (volatile unsigned short *) addr; + unsigned char *bp = (unsigned char *) buf; + + if(h8300_buswidth(addr) && (addr & 1)) { + while (len--) + *ap_w = *bp++; + } else { + while (len--) + *ap_b = *bp++; + } +} + +static inline void io_outsw(unsigned int addr, const void *buf, int len) +{ + volatile unsigned short *ap = (volatile unsigned short *) addr; + unsigned short *bp = (unsigned short *) buf; + while (len--) + *ap = _swapw(*bp++); +} + +static inline void io_outsl(unsigned int addr, const void *buf, int len) +{ + volatile unsigned long *ap = (volatile unsigned long *) addr; + unsigned long *bp = (unsigned long *) buf; + while (len--) + *ap = _swapl(*bp++); +} + +static inline void io_outsw_noswap(unsigned int addr, const void *buf, int len) +{ + volatile unsigned short *ap = (volatile unsigned short *) addr; + unsigned short *bp = (unsigned short *) buf; + while (len--) + *ap = *bp++; +} + +static inline void io_outsl_noswap(unsigned int addr, const void *buf, int len) +{ + volatile unsigned long *ap = (volatile unsigned long *) addr; + unsigned long *bp = (unsigned long *) buf; + while (len--) + *ap = *bp++; +} + +static inline void io_insb(unsigned int addr, void *buf, int len) +{ + volatile unsigned char *ap_b; + volatile unsigned short *ap_w; + unsigned char *bp = (unsigned char *) buf; + + if(h8300_buswidth(addr)) { + ap_w = (volatile unsigned short *)(addr & ~1); + while (len--) + *bp++ = *ap_w & 0xff; + } else { + ap_b = (volatile unsigned char *)addr; + while (len--) + *bp++ = *ap_b; + } +} + +static inline void io_insw(unsigned int addr, void *buf, int len) +{ + volatile unsigned short *ap = (volatile unsigned short *) addr; + unsigned short *bp = (unsigned short *) buf; + while (len--) + *bp++ = _swapw(*ap); +} + +static inline void io_insl(unsigned int addr, void *buf, int len) +{ + volatile unsigned long *ap = (volatile unsigned long *) addr; + unsigned long *bp = (unsigned long *) buf; + while (len--) + *bp++ = _swapl(*ap); +} + +static inline void io_insw_noswap(unsigned int addr, void *buf, int len) +{ + volatile unsigned short *ap = (volatile unsigned short *) addr; + unsigned short *bp = (unsigned short *) buf; + while (len--) + *bp++ = *ap; +} + +static inline void io_insl_noswap(unsigned int addr, void *buf, int len) +{ + volatile unsigned long *ap = (volatile unsigned long *) addr; + unsigned long *bp = (unsigned long *) buf; + while (len--) + *bp++ = *ap; +} + +/* + * make the short names macros so specific devices + * can override them as required + */ + +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +#define mmiowb() + +#define inb(addr) ((h8300_buswidth(addr))?readw((addr) & ~1) & 0xff:readb(addr)) +#define inw(addr) _swapw(readw(addr)) +#define inl(addr) _swapl(readl(addr)) +#define outb(x,addr) ((void)((h8300_buswidth(addr) && \ + ((addr) & 1))?writew(x,(addr) & ~1):writeb(x,addr))) +#define outw(x,addr) ((void) writew(_swapw(x),addr)) +#define outl(x,addr) ((void) writel(_swapl(x),addr)) + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x,addr) outb(x,addr) +#define outw_p(x,addr) outw(x,addr) +#define outl_p(x,addr) outl(x,addr) + +#define outsb(a,b,l) io_outsb(a,b,l) +#define outsw(a,b,l) io_outsw(a,b,l) +#define outsl(a,b,l) io_outsl(a,b,l) + +#define insb(a,b,l) io_insb(a,b,l) +#define insw(a,b,l) io_insw(a,b,l) +#define insl(a,b,l) io_insl(a,b,l) + +#define IO_SPACE_LIMIT 0xffffff + + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); +extern void __iounmap(void *addr, unsigned long size); + +static inline void *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} +static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +extern void iounmap(void *addr); + +/* H8/300 internal I/O functions */ +static __inline__ unsigned char ctrl_inb(unsigned long addr) +{ + return *(volatile unsigned char*)addr; +} + +static __inline__ unsigned short ctrl_inw(unsigned long addr) +{ + return *(volatile unsigned short*)addr; +} + +static __inline__ unsigned long ctrl_inl(unsigned long addr) +{ + return *(volatile unsigned long*)addr; +} + +static __inline__ void ctrl_outb(unsigned char b, unsigned long addr) +{ + *(volatile unsigned char*)addr = b; +} + +static __inline__ void ctrl_outw(unsigned short b, unsigned long addr) +{ + *(volatile unsigned short*)addr = b; +} + +static __inline__ void ctrl_outl(unsigned long b, unsigned long addr) +{ + *(volatile unsigned long*)addr = b; +} + +/* Pages to physical address... */ +#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) +#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) + +/* + * Macros used for converting between virtual and physical mappings. + */ +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* _H8300_IO_H */ diff --git a/arch/h8300/include/asm/ioctl.h b/arch/h8300/include/asm/ioctl.h new file mode 100644 index 000000000000..b279fe06dfe5 --- /dev/null +++ b/arch/h8300/include/asm/ioctl.h @@ -0,0 +1 @@ +#include <asm-generic/ioctl.h> diff --git a/arch/h8300/include/asm/ioctls.h b/arch/h8300/include/asm/ioctls.h new file mode 100644 index 000000000000..98a53d067269 --- /dev/null +++ b/arch/h8300/include/asm/ioctls.h @@ -0,0 +1,85 @@ +#ifndef __ARCH_H8300_IOCTLS_H__ +#define __ARCH_H8300_IOCTLS_H__ + +#include <asm/ioctl.h> + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* __ARCH_H8300_IOCTLS_H__ */ diff --git a/arch/h8300/include/asm/ipcbuf.h b/arch/h8300/include/asm/ipcbuf.h new file mode 100644 index 000000000000..2cd1ebcc109d --- /dev/null +++ b/arch/h8300/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef __H8300_IPCBUF_H__ +#define __H8300_IPCBUF_H__ + +/* + * The user_ipc_perm structure for H8/300 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __H8300_IPCBUF_H__ */ diff --git a/arch/h8300/include/asm/irq.h b/arch/h8300/include/asm/irq.h new file mode 100644 index 000000000000..13d7c601cd0a --- /dev/null +++ b/arch/h8300/include/asm/irq.h @@ -0,0 +1,49 @@ +#ifndef _H8300_IRQ_H_ +#define _H8300_IRQ_H_ + +#include <asm/ptrace.h> + +#if defined(CONFIG_CPU_H8300H) +#define NR_IRQS 64 +#define EXT_IRQ0 12 +#define EXT_IRQ1 13 +#define EXT_IRQ2 14 +#define EXT_IRQ3 15 +#define EXT_IRQ4 16 +#define EXT_IRQ5 17 +#define EXT_IRQ6 18 +#define EXT_IRQ7 19 +#define EXT_IRQS 5 +#define IER_REGS *(volatile unsigned char *)IER +#endif +#if defined(CONFIG_CPU_H8S) +#define NR_IRQS 128 +#define EXT_IRQ0 16 +#define EXT_IRQ1 17 +#define EXT_IRQ2 18 +#define EXT_IRQ3 19 +#define EXT_IRQ4 20 +#define EXT_IRQ5 21 +#define EXT_IRQ6 22 +#define EXT_IRQ7 23 +#define EXT_IRQ8 24 +#define EXT_IRQ9 25 +#define EXT_IRQ10 26 +#define EXT_IRQ11 27 +#define EXT_IRQ12 28 +#define EXT_IRQ13 29 +#define EXT_IRQ14 30 +#define EXT_IRQ15 31 +#define EXT_IRQS 15 + +#define IER_REGS *(volatile unsigned short *)IER +#endif + +static __inline__ int irq_canonicalize(int irq) +{ + return irq; +} + +typedef void (*h8300_vector)(void); + +#endif /* _H8300_IRQ_H_ */ diff --git a/arch/h8300/include/asm/irq_regs.h b/arch/h8300/include/asm/irq_regs.h new file mode 100644 index 000000000000..3dd9c0b70270 --- /dev/null +++ b/arch/h8300/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include <asm-generic/irq_regs.h> diff --git a/arch/h8300/include/asm/kdebug.h b/arch/h8300/include/asm/kdebug.h new file mode 100644 index 000000000000..6ece1b037665 --- /dev/null +++ b/arch/h8300/include/asm/kdebug.h @@ -0,0 +1 @@ +#include <asm-generic/kdebug.h> diff --git a/arch/h8300/include/asm/kmap_types.h b/arch/h8300/include/asm/kmap_types.h new file mode 100644 index 000000000000..1ec8a3427120 --- /dev/null +++ b/arch/h8300/include/asm/kmap_types.h @@ -0,0 +1,21 @@ +#ifndef _ASM_H8300_KMAP_TYPES_H +#define _ASM_H8300_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif diff --git a/arch/h8300/include/asm/linkage.h b/arch/h8300/include/asm/linkage.h new file mode 100644 index 000000000000..6f4df7d46180 --- /dev/null +++ b/arch/h8300/include/asm/linkage.h @@ -0,0 +1,8 @@ +#ifndef _H8300_LINKAGE_H +#define _H8300_LINKAGE_H + +#undef SYMBOL_NAME_LABEL +#undef SYMBOL_NAME +#define SYMBOL_NAME_LABEL(_name_) _##_name_##: +#define SYMBOL_NAME(_name_) _##_name_ +#endif diff --git a/arch/h8300/include/asm/local.h b/arch/h8300/include/asm/local.h new file mode 100644 index 000000000000..fdd4efe437cd --- /dev/null +++ b/arch/h8300/include/asm/local.h @@ -0,0 +1,6 @@ +#ifndef _H8300_LOCAL_H_ +#define _H8300_LOCAL_H_ + +#include <asm-generic/local.h> + +#endif diff --git a/arch/h8300/include/asm/mc146818rtc.h b/arch/h8300/include/asm/mc146818rtc.h new file mode 100644 index 000000000000..ab9d9646d241 --- /dev/null +++ b/arch/h8300/include/asm/mc146818rtc.h @@ -0,0 +1,9 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _H8300_MC146818RTC_H +#define _H8300_MC146818RTC_H + +/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */ + +#endif /* _H8300_MC146818RTC_H */ diff --git a/arch/h8300/include/asm/md.h b/arch/h8300/include/asm/md.h new file mode 100644 index 000000000000..1a47dc6691fb --- /dev/null +++ b/arch/h8300/include/asm/md.h @@ -0,0 +1,13 @@ +/* $Id: md.h,v 1.1 2002/11/19 02:09:26 gerg Exp $ + * md.h: High speed xor_block operation for RAID4/5 + * + */ + +#ifndef __ASM_MD_H +#define __ASM_MD_H + +/* #define HAVE_ARCH_XORBLOCK */ + +#define MD_XORBLOCK_ALIGNMENT sizeof(long) + +#endif /* __ASM_MD_H */ diff --git a/arch/h8300/include/asm/mman.h b/arch/h8300/include/asm/mman.h new file mode 100644 index 000000000000..b9f104f22a36 --- /dev/null +++ b/arch/h8300/include/asm/mman.h @@ -0,0 +1,17 @@ +#ifndef __H8300_MMAN_H__ +#define __H8300_MMAN_H__ + +#include <asm-generic/mman.h> + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __H8300_MMAN_H__ */ diff --git a/arch/h8300/include/asm/mmu.h b/arch/h8300/include/asm/mmu.h new file mode 100644 index 000000000000..2ce06ea46104 --- /dev/null +++ b/arch/h8300/include/asm/mmu.h @@ -0,0 +1,11 @@ +#ifndef __MMU_H +#define __MMU_H + +/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */ + +typedef struct { + struct vm_list_struct *vmlist; + unsigned long end_brk; +} mm_context_t; + +#endif diff --git a/arch/h8300/include/asm/mmu_context.h b/arch/h8300/include/asm/mmu_context.h new file mode 100644 index 000000000000..f44b730da54d --- /dev/null +++ b/arch/h8300/include/asm/mmu_context.h @@ -0,0 +1,32 @@ +#ifndef __H8300_MMU_CONTEXT_H +#define __H8300_MMU_CONTEXT_H + +#include <asm/setup.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm-generic/mm_hooks.h> + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + // mm->context = virt_to_phys(mm->pgd); + return(0); +} + +#define destroy_context(mm) do { } while(0) +#define deactivate_mm(tsk,mm) do { } while(0) + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) +{ +} + +static inline void activate_mm(struct mm_struct *prev_mm, + struct mm_struct *next_mm) +{ +} + +#endif diff --git a/arch/h8300/include/asm/module.h b/arch/h8300/include/asm/module.h new file mode 100644 index 000000000000..de23231f3196 --- /dev/null +++ b/arch/h8300/include/asm/module.h @@ -0,0 +1,13 @@ +#ifndef _ASM_H8300_MODULE_H +#define _ASM_H8300_MODULE_H +/* + * This file contains the H8/300 architecture specific module code. + */ +struct mod_arch_specific { }; +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#define MODULE_SYMBOL_PREFIX "_" + +#endif /* _ASM_H8/300_MODULE_H */ diff --git a/arch/h8300/include/asm/msgbuf.h b/arch/h8300/include/asm/msgbuf.h new file mode 100644 index 000000000000..6b148cd09aa5 --- /dev/null +++ b/arch/h8300/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _H8300_MSGBUF_H +#define _H8300_MSGBUF_H + +/* + * The msqid64_ds structure for H8/300 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _H8300_MSGBUF_H */ diff --git a/arch/h8300/include/asm/mutex.h b/arch/h8300/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/h8300/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include <asm-generic/mutex-dec.h> diff --git a/arch/h8300/include/asm/page.h b/arch/h8300/include/asm/page.h new file mode 100644 index 000000000000..0b6acf0b03aa --- /dev/null +++ b/arch/h8300/include/asm/page.h @@ -0,0 +1,78 @@ +#ifndef _H8300_PAGE_H +#define _H8300_PAGE_H + +/* PAGE_SHIFT determines the page size */ + +#define PAGE_SHIFT (12) +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#include <asm/setup.h> + +#ifndef __ASSEMBLY__ + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(page) memset((page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ + alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) +#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd[16]; } pmd_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((&x)->pmd[0]) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +extern unsigned long memory_start; +extern unsigned long memory_end; + +#endif /* !__ASSEMBLY__ */ + +#include <asm/page_offset.h> + +#define PAGE_OFFSET (PAGE_OFFSET_RAW) + +#ifndef __ASSEMBLY__ + +#define __pa(vaddr) virt_to_phys(vaddr) +#define __va(paddr) phys_to_virt((unsigned long)paddr) + +#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) +#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) + +#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) +#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) +#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) +#define pfn_valid(page) (page < max_mapnr) + +#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) + +#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ + ((void *)(kaddr) < (void *)memory_end)) + +#endif /* __ASSEMBLY__ */ + +#include <asm-generic/memory_model.h> +#include <asm-generic/page.h> + +#endif /* _H8300_PAGE_H */ diff --git a/arch/h8300/include/asm/page_offset.h b/arch/h8300/include/asm/page_offset.h new file mode 100644 index 000000000000..f8706463008c --- /dev/null +++ b/arch/h8300/include/asm/page_offset.h @@ -0,0 +1,3 @@ + +#define PAGE_OFFSET_RAW 0x00000000 + diff --git a/arch/h8300/include/asm/param.h b/arch/h8300/include/asm/param.h new file mode 100644 index 000000000000..1c72fb8080ff --- /dev/null +++ b/arch/h8300/include/asm/param.h @@ -0,0 +1,20 @@ +#ifndef _H8300_PARAM_H +#define _H8300_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ +#define USER_HZ HZ +#define CLOCKS_PER_SEC (USER_HZ) +#else +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _H8300_PARAM_H */ diff --git a/arch/h8300/include/asm/pci.h b/arch/h8300/include/asm/pci.h new file mode 100644 index 000000000000..97389b35aa35 --- /dev/null +++ b/arch/h8300/include/asm/pci.h @@ -0,0 +1,25 @@ +#ifndef _ASM_H8300_PCI_H +#define _ASM_H8300_PCI_H + +/* + * asm-h8300/pci.h - H8/300 specific PCI declarations. + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + */ + +#define pcibios_assign_all_busses() 0 +#define pcibios_scan_all_fns(a, b) 0 + +static inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +#define PCI_DMA_BUS_IS_PHYS (1) + +#endif /* _ASM_H8300_PCI_H */ diff --git a/arch/h8300/include/asm/percpu.h b/arch/h8300/include/asm/percpu.h new file mode 100644 index 000000000000..72c03e3666d8 --- /dev/null +++ b/arch/h8300/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_H8300_PERCPU__ +#define __ARCH_H8300_PERCPU__ + +#include <asm-generic/percpu.h> + +#endif /* __ARCH_H8300_PERCPU__ */ diff --git a/arch/h8300/include/asm/pgalloc.h b/arch/h8300/include/asm/pgalloc.h new file mode 100644 index 000000000000..c2e89a286d23 --- /dev/null +++ b/arch/h8300/include/asm/pgalloc.h @@ -0,0 +1,8 @@ +#ifndef _H8300_PGALLOC_H +#define _H8300_PGALLOC_H + +#include <asm/setup.h> + +#define check_pgt_cache() do { } while (0) + +#endif /* _H8300_PGALLOC_H */ diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h new file mode 100644 index 000000000000..a09230a08e02 --- /dev/null +++ b/arch/h8300/include/asm/pgtable.h @@ -0,0 +1,73 @@ +#ifndef _H8300_PGTABLE_H +#define _H8300_PGTABLE_H + +#include <asm-generic/4level-fixup.h> + +#include <linux/slab.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/io.h> + +#define pgd_present(pgd) (1) /* pages are always present on NO_MM */ +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) +#define pmd_offset(a, b) ((void *)0) +#define pmd_none(pmd) (1) +#define pgd_offset_k(adrdress) ((pgd_t *)0) +#define pte_offset_kernel(dir, address) ((pte_t *)0) + +#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */ + +extern void paging_init(void); +#define swapper_pg_dir ((pgd_t *) 0) + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +static inline int pte_file(pte_t pte) { return 0; } + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(0)) + +/* + * These would be in other places but having them here reduces the diffs. + */ +extern unsigned int kobjsize(const void *objp); +extern int is_in_rom(unsigned long); + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +/* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. + */ +#define VMALLOC_START 0 +#define VMALLOC_END 0xffffffff + +/* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. + */ +#define VMALLOC_START 0 +#define VMALLOC_END 0xffffffff + +#define arch_enter_lazy_cpu_mode() do {} while (0) +#endif /* _H8300_PGTABLE_H */ diff --git a/arch/h8300/include/asm/poll.h b/arch/h8300/include/asm/poll.h new file mode 100644 index 000000000000..f61540c22d94 --- /dev/null +++ b/arch/h8300/include/asm/poll.h @@ -0,0 +1,11 @@ +#ifndef __H8300_POLL_H +#define __H8300_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 256 + +#include <asm-generic/poll.h> + +#undef POLLREMOVE + +#endif diff --git a/arch/h8300/include/asm/posix_types.h b/arch/h8300/include/asm/posix_types.h new file mode 100644 index 000000000000..5c553927fc53 --- /dev/null +++ b/arch/h8300/include/asm/posix_types.h @@ -0,0 +1,60 @@ +#ifndef __ARCH_H8300_POSIX_TYPES_H +#define __ARCH_H8300_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) + +#undef __FD_CLR +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) + +#undef __FD_ISSET +#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) + +#endif /* defined(__KERNEL__) */ + +#endif diff --git a/arch/h8300/include/asm/processor.h b/arch/h8300/include/asm/processor.h new file mode 100644 index 000000000000..69e8a34eb6d5 --- /dev/null +++ b/arch/h8300/include/asm/processor.h @@ -0,0 +1,140 @@ +/* + * include/asm-h8300/processor.h + * + * Copyright (C) 2002 Yoshinori Sato + * + * Based on: linux/asm-m68nommu/processor.h + * + * Copyright (C) 1995 Hamish Macdonald + */ + +#ifndef __ASM_H8300_PROCESSOR_H +#define __ASM_H8300_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include <linux/compiler.h> +#include <asm/segment.h> +#include <asm/fpu.h> +#include <asm/ptrace.h> +#include <asm/current.h> + +static inline unsigned long rdusp(void) { + extern unsigned int sw_usp; + return(sw_usp); +} + +static inline void wrusp(unsigned long usp) { + extern unsigned int sw_usp; + sw_usp = usp; +} + +/* + * User space process size: 3.75GB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ +#define TASK_SIZE (0xFFFFFFFFUL) + +#ifdef __KERNEL__ +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP +#endif + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. We won't be using it + */ +#define TASK_UNMAPPED_BASE 0 + +struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned long ccr; /* saved status register */ + unsigned long esp0; /* points to SR of stack frame */ + struct { + unsigned short *addr; + unsigned short inst; + } breakinfo; +}; + +#define INIT_THREAD { \ + .ksp = sizeof(init_stack) + (unsigned long)init_stack, \ + .usp = 0, \ + .ccr = PS_S, \ + .esp0 = 0, \ + .breakinfo = { \ + .addr = (unsigned short *)-1, \ + .inst = 0 \ + } \ +} + +/* + * Do necessary setup to start up a newly executed thread. + * + * pass the data segment into user programs if it exists, + * it can't hurt anything as far as I can tell + */ +#if defined(__H8300H__) +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); /* reads from user space */ \ + (_regs)->pc = (_pc); \ + (_regs)->ccr = 0x00; /* clear all flags */ \ + (_regs)->er5 = current->mm->start_data; /* GOT base */ \ + wrusp((unsigned long)(_usp) - sizeof(unsigned long)*3); \ +} while(0) +#endif +#if defined(__H8300S__) +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); /* reads from user space */ \ + (_regs)->pc = (_pc); \ + (_regs)->ccr = 0x00; /* clear kernel flag */ \ + (_regs)->exr = 0x78; /* enable all interrupts */ \ + (_regs)->er5 = current->mm->start_data; /* GOT base */ \ + /* 14 = space for retaddr(4), vector(4), er0(4) and ext(2) on stack */ \ + wrusp(((unsigned long)(_usp)) - 14); \ +} while(0) +#endif + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +#define prepare_to_copy(tsk) do { } while (0) + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +/* + * Return saved PC of a blocked thread. + */ +unsigned long thread_saved_pc(struct task_struct *tsk); +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) \ + ({ \ + unsigned long eip = 0; \ + if ((tsk)->thread.esp0 > PAGE_SIZE && \ + MAP_NR((tsk)->thread.esp0) < max_mapnr) \ + eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ + eip; }) +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) + +#define cpu_relax() barrier() + +#endif diff --git a/arch/h8300/include/asm/ptrace.h b/arch/h8300/include/asm/ptrace.h new file mode 100644 index 000000000000..c2e05e4b512e --- /dev/null +++ b/arch/h8300/include/asm/ptrace.h @@ -0,0 +1,64 @@ +#ifndef _H8300_PTRACE_H +#define _H8300_PTRACE_H + +#ifndef __ASSEMBLY__ + +#define PT_ER1 0 +#define PT_ER2 1 +#define PT_ER3 2 +#define PT_ER4 3 +#define PT_ER5 4 +#define PT_ER6 5 +#define PT_ER0 6 +#define PT_ORIG_ER0 7 +#define PT_CCR 8 +#define PT_PC 9 +#define PT_USP 10 +#define PT_EXR 12 + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long retpc; + long er4; + long er5; + long er6; + long er3; + long er2; + long er1; + long orig_er0; + unsigned short ccr; + long er0; + long vector; +#if defined(CONFIG_CPU_H8S) + unsigned short exr; +#endif + unsigned long pc; +} __attribute__((aligned(2),packed)); + +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 + +#ifdef __KERNEL__ +#ifndef PS_S +#define PS_S (0x10) +#endif + +#if defined(__H8300H__) +#define H8300_REGS_NO 11 +#endif +#if defined(__H8300S__) +#define H8300_REGS_NO 12 +#endif + +/* Find the stack offset for a register, relative to thread.esp0. */ +#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg) + +#define user_mode(regs) (!((regs)->ccr & PS_S)) +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) +extern void show_regs(struct pt_regs *); +#endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ +#endif /* _H8300_PTRACE_H */ diff --git a/arch/h8300/include/asm/regs267x.h b/arch/h8300/include/asm/regs267x.h new file mode 100644 index 000000000000..1bff731a9f77 --- /dev/null +++ b/arch/h8300/include/asm/regs267x.h @@ -0,0 +1,336 @@ +/* internal Peripherals Register address define */ +/* CPU: H8/306x */ + +#if !defined(__REGS_H8S267x__) +#define __REGS_H8S267x__ + +#if defined(__KERNEL__) + +#define DASTCR 0xFEE01A +#define DADR0 0xFFFFA4 +#define DADR1 0xFFFFA5 +#define DACR01 0xFFFFA6 +#define DADR2 0xFFFFA8 +#define DADR3 0xFFFFA9 +#define DACR23 0xFFFFAA + +#define ADDRA 0xFFFF90 +#define ADDRAH 0xFFFF90 +#define ADDRAL 0xFFFF91 +#define ADDRB 0xFFFF92 +#define ADDRBH 0xFFFF92 +#define ADDRBL 0xFFFF93 +#define ADDRC 0xFFFF94 +#define ADDRCH 0xFFFF94 +#define ADDRCL 0xFFFF95 +#define ADDRD 0xFFFF96 +#define ADDRDH 0xFFFF96 +#define ADDRDL 0xFFFF97 +#define ADDRE 0xFFFF98 +#define ADDREH 0xFFFF98 +#define ADDREL 0xFFFF99 +#define ADDRF 0xFFFF9A +#define ADDRFH 0xFFFF9A +#define ADDRFL 0xFFFF9B +#define ADDRG 0xFFFF9C +#define ADDRGH 0xFFFF9C +#define ADDRGL 0xFFFF9D +#define ADDRH 0xFFFF9E +#define ADDRHH 0xFFFF9E +#define ADDRHL 0xFFFF9F + +#define ADCSR 0xFFFFA0 +#define ADCR 0xFFFFA1 + +#define ABWCR 0xFFFEC0 +#define ASTCR 0xFFFEC1 +#define WTCRAH 0xFFFEC2 +#define WTCRAL 0xFFFEC3 +#define WTCRBH 0xFFFEC4 +#define WTCRBL 0xFFFEC5 +#define RDNCR 0xFFFEC6 +#define CSACRH 0xFFFEC8 +#define CSACRL 0xFFFEC9 +#define BROMCRH 0xFFFECA +#define BROMCRL 0xFFFECB +#define BCR 0xFFFECC +#define DRAMCR 0xFFFED0 +#define DRACCR 0xFFFED2 +#define REFCR 0xFFFED4 +#define RTCNT 0xFFFED6 +#define RTCOR 0xFFFED7 + +#define MAR0AH 0xFFFEE0 +#define MAR0AL 0xFFFEE2 +#define IOAR0A 0xFFFEE4 +#define ETCR0A 0xFFFEE6 +#define MAR0BH 0xFFFEE8 +#define MAR0BL 0xFFFEEA +#define IOAR0B 0xFFFEEC +#define ETCR0B 0xFFFEEE +#define MAR1AH 0xFFFEF0 +#define MAR1AL 0xFFFEF2 +#define IOAR1A 0xFFFEF4 +#define ETCR1A 0xFFFEF6 +#define MAR1BH 0xFFFEF8 +#define MAR1BL 0xFFFEFA +#define IOAR1B 0xFFFEFC +#define ETCR1B 0xFFFEFE +#define DMAWER 0xFFFF20 +#define DMATCR 0xFFFF21 +#define DMACR0A 0xFFFF22 +#define DMACR0B 0xFFFF23 +#define DMACR1A 0xFFFF24 +#define DMACR1B 0xFFFF25 +#define DMABCRH 0xFFFF26 +#define DMABCRL 0xFFFF27 + +#define EDSAR0 0xFFFDC0 +#define EDDAR0 0xFFFDC4 +#define EDTCR0 0xFFFDC8 +#define EDMDR0 0xFFFDCC +#define EDMDR0H 0xFFFDCC +#define EDMDR0L 0xFFFDCD +#define EDACR0 0xFFFDCE +#define EDSAR1 0xFFFDD0 +#define EDDAR1 0xFFFDD4 +#define EDTCR1 0xFFFDD8 +#define EDMDR1 0xFFFDDC +#define EDMDR1H 0xFFFDDC +#define EDMDR1L 0xFFFDDD +#define EDACR1 0xFFFDDE +#define EDSAR2 0xFFFDE0 +#define EDDAR2 0xFFFDE4 +#define EDTCR2 0xFFFDE8 +#define EDMDR2 0xFFFDEC +#define EDMDR2H 0xFFFDEC +#define EDMDR2L 0xFFFDED +#define EDACR2 0xFFFDEE +#define EDSAR3 0xFFFDF0 +#define EDDAR3 0xFFFDF4 +#define EDTCR3 0xFFFDF8 +#define EDMDR3 0xFFFDFC +#define EDMDR3H 0xFFFDFC +#define EDMDR3L 0xFFFDFD +#define EDACR3 0xFFFDFE + +#define IPRA 0xFFFE00 +#define IPRB 0xFFFE02 +#define IPRC 0xFFFE04 +#define IPRD 0xFFFE06 +#define IPRE 0xFFFE08 +#define IPRF 0xFFFE0A +#define IPRG 0xFFFE0C +#define IPRH 0xFFFE0E +#define IPRI 0xFFFE10 +#define IPRJ 0xFFFE12 +#define IPRK 0xFFFE14 +#define ITSR 0xFFFE16 +#define SSIER 0xFFFE18 +#define ISCRH 0xFFFE1A +#define ISCRL 0xFFFE1C + +#define INTCR 0xFFFF31 +#define IER 0xFFFF32 +#define IERH 0xFFFF32 +#define IERL 0xFFFF33 +#define ISR 0xFFFF34 +#define ISRH 0xFFFF34 +#define ISRL 0xFFFF35 + +#define P1DDR 0xFFFE20 +#define P2DDR 0xFFFE21 +#define P3DDR 0xFFFE22 +#define P4DDR 0xFFFE23 +#define P5DDR 0xFFFE24 +#define P6DDR 0xFFFE25 +#define P7DDR 0xFFFE26 +#define P8DDR 0xFFFE27 +#define P9DDR 0xFFFE28 +#define PADDR 0xFFFE29 +#define PBDDR 0xFFFE2A +#define PCDDR 0xFFFE2B +#define PDDDR 0xFFFE2C +#define PEDDR 0xFFFE2D +#define PFDDR 0xFFFE2E +#define PGDDR 0xFFFE2F +#define PHDDR 0xFFFF74 + +#define PFCR0 0xFFFE32 +#define PFCR1 0xFFFE33 +#define PFCR2 0xFFFE34 + +#define PAPCR 0xFFFE36 +#define PBPCR 0xFFFE37 +#define PCPCR 0xFFFE38 +#define PDPCR 0xFFFE39 +#define PEPCR 0xFFFE3A + +#define P3ODR 0xFFFE3C +#define PAODR 0xFFFE3D + +#define P1DR 0xFFFF60 +#define P2DR 0xFFFF61 +#define P3DR 0xFFFF62 +#define P4DR 0xFFFF63 +#define P5DR 0xFFFF64 +#define P6DR 0xFFFF65 +#define P7DR 0xFFFF66 +#define P8DR 0xFFFF67 +#define P9DR 0xFFFF68 +#define PADR 0xFFFF69 +#define PBDR 0xFFFF6A +#define PCDR 0xFFFF6B +#define PDDR 0xFFFF6C +#define PEDR 0xFFFF6D +#define PFDR 0xFFFF6E +#define PGDR 0xFFFF6F +#define PHDR 0xFFFF72 + +#define PORT1 0xFFFF50 +#define PORT2 0xFFFF51 +#define PORT3 0xFFFF52 +#define PORT4 0xFFFF53 +#define PORT5 0xFFFF54 +#define PORT6 0xFFFF55 +#define PORT7 0xFFFF56 +#define PORT8 0xFFFF57 +#define PORT9 0xFFFF58 +#define PORTA 0xFFFF59 +#define PORTB 0xFFFF5A +#define PORTC 0xFFFF5B +#define PORTD 0xFFFF5C +#define PORTE 0xFFFF5D +#define PORTF 0xFFFF5E +#define PORTG 0xFFFF5F +#define PORTH 0xFFFF70 + +#define PCR 0xFFFF46 +#define PMR 0xFFFF47 +#define NDERH 0xFFFF48 +#define NDERL 0xFFFF49 +#define PODRH 0xFFFF4A +#define PODRL 0xFFFF4B +#define NDRH1 0xFFFF4C +#define NDRL1 0xFFFF4D +#define NDRH2 0xFFFF4E +#define NDRL2 0xFFFF4F + +#define SMR0 0xFFFF78 +#define BRR0 0xFFFF79 +#define SCR0 0xFFFF7A +#define TDR0 0xFFFF7B +#define SSR0 0xFFFF7C +#define RDR0 0xFFFF7D +#define SCMR0 0xFFFF7E +#define SMR1 0xFFFF80 +#define BRR1 0xFFFF81 +#define SCR1 0xFFFF82 +#define TDR1 0xFFFF83 +#define SSR1 0xFFFF84 +#define RDR1 0xFFFF85 +#define SCMR1 0xFFFF86 +#define SMR2 0xFFFF88 +#define BRR2 0xFFFF89 +#define SCR2 0xFFFF8A +#define TDR2 0xFFFF8B +#define SSR2 0xFFFF8C +#define RDR2 0xFFFF8D +#define SCMR2 0xFFFF8E + +#define IRCR0 0xFFFE1E +#define SEMR 0xFFFDA8 + +#define MDCR 0xFFFF3E +#define SYSCR 0xFFFF3D +#define MSTPCRH 0xFFFF40 +#define MSTPCRL 0xFFFF41 +#define FLMCR1 0xFFFFC8 +#define FLMCR2 0xFFFFC9 +#define EBR1 0xFFFFCA +#define EBR2 0xFFFFCB +#define CTGARC_RAMCR 0xFFFECE +#define SBYCR 0xFFFF3A +#define SCKCR 0xFFFF3B +#define PLLCR 0xFFFF45 + +#define TSTR 0xFFFFC0 +#define TSNC 0XFFFFC1 + +#define TCR0 0xFFFFD0 +#define TMDR0 0xFFFFD1 +#define TIORH0 0xFFFFD2 +#define TIORL0 0xFFFFD3 +#define TIER0 0xFFFFD4 +#define TSR0 0xFFFFD5 +#define TCNT0 0xFFFFD6 +#define GRA0 0xFFFFD8 +#define GRB0 0xFFFFDA +#define GRC0 0xFFFFDC +#define GRD0 0xFFFFDE +#define TCR1 0xFFFFE0 +#define TMDR1 0xFFFFE1 +#define TIORH1 0xFFFFE2 +#define TIORL1 0xFFFFE3 +#define TIER1 0xFFFFE4 +#define TSR1 0xFFFFE5 +#define TCNT1 0xFFFFE6 +#define GRA1 0xFFFFE8 +#define GRB1 0xFFFFEA +#define TCR2 0xFFFFF0 +#define TMDR2 0xFFFFF1 +#define TIORH2 0xFFFFF2 +#define TIORL2 0xFFFFF3 +#define TIER2 0xFFFFF4 +#define TSR2 0xFFFFF5 +#define TCNT2 0xFFFFF6 +#define GRA2 0xFFFFF8 +#define GRB2 0xFFFFFA +#define TCR3 0xFFFE80 +#define TMDR3 0xFFFE81 +#define TIORH3 0xFFFE82 +#define TIORL3 0xFFFE83 +#define TIER3 0xFFFE84 +#define TSR3 0xFFFE85 +#define TCNT3 0xFFFE86 +#define GRA3 0xFFFE88 +#define GRB3 0xFFFE8A +#define GRC3 0xFFFE8C +#define GRD3 0xFFFE8E +#define TCR4 0xFFFE90 +#define TMDR4 0xFFFE91 +#define TIORH4 0xFFFE92 +#define TIORL4 0xFFFE93 +#define TIER4 0xFFFE94 +#define TSR4 0xFFFE95 +#define TCNT4 0xFFFE96 +#define GRA4 0xFFFE98 +#define GRB4 0xFFFE9A +#define TCR5 0xFFFEA0 +#define TMDR5 0xFFFEA1 +#define TIORH5 0xFFFEA2 +#define TIORL5 0xFFFEA3 +#define TIER5 0xFFFEA4 +#define TSR5 0xFFFEA5 +#define TCNT5 0xFFFEA6 +#define GRA5 0xFFFEA8 +#define GRB5 0xFFFEAA + +#define _8TCR0 0xFFFFB0 +#define _8TCR1 0xFFFFB1 +#define _8TCSR0 0xFFFFB2 +#define _8TCSR1 0xFFFFB3 +#define _8TCORA0 0xFFFFB4 +#define _8TCORA1 0xFFFFB5 +#define _8TCORB0 0xFFFFB6 +#define _8TCORB1 0xFFFFB7 +#define _8TCNT0 0xFFFFB8 +#define _8TCNT1 0xFFFFB9 + +#define TCSR 0xFFFFBC +#define TCNT 0xFFFFBD +#define RSTCSRW 0xFFFFBE +#define RSTCSRR 0xFFFFBF + +#endif /* __KERNEL__ */ +#endif /* __REGS_H8S267x__ */ diff --git a/arch/h8300/include/asm/regs306x.h b/arch/h8300/include/asm/regs306x.h new file mode 100644 index 000000000000..027dd633fa25 --- /dev/null +++ b/arch/h8300/include/asm/regs306x.h @@ -0,0 +1,212 @@ +/* internal Peripherals Register address define */ +/* CPU: H8/306x */ + +#if !defined(__REGS_H8306x__) +#define __REGS_H8306x__ + +#if defined(__KERNEL__) + +#define DASTCR 0xFEE01A +#define DADR0 0xFEE09C +#define DADR1 0xFEE09D +#define DACR 0xFEE09E + +#define ADDRAH 0xFFFFE0 +#define ADDRAL 0xFFFFE1 +#define ADDRBH 0xFFFFE2 +#define ADDRBL 0xFFFFE3 +#define ADDRCH 0xFFFFE4 +#define ADDRCL 0xFFFFE5 +#define ADDRDH 0xFFFFE6 +#define ADDRDL 0xFFFFE7 +#define ADCSR 0xFFFFE8 +#define ADCR 0xFFFFE9 + +#define BRCR 0xFEE013 +#define ADRCR 0xFEE01E +#define CSCR 0xFEE01F +#define ABWCR 0xFEE020 +#define ASTCR 0xFEE021 +#define WCRH 0xFEE022 +#define WCRL 0xFEE023 +#define BCR 0xFEE024 +#define DRCRA 0xFEE026 +#define DRCRB 0xFEE027 +#define RTMCSR 0xFEE028 +#define RTCNT 0xFEE029 +#define RTCOR 0xFEE02A + +#define MAR0AR 0xFFFF20 +#define MAR0AE 0xFFFF21 +#define MAR0AH 0xFFFF22 +#define MAR0AL 0xFFFF23 +#define ETCR0AL 0xFFFF24 +#define ETCR0AH 0xFFFF25 +#define IOAR0A 0xFFFF26 +#define DTCR0A 0xFFFF27 +#define MAR0BR 0xFFFF28 +#define MAR0BE 0xFFFF29 +#define MAR0BH 0xFFFF2A +#define MAR0BL 0xFFFF2B +#define ETCR0BL 0xFFFF2C +#define ETCR0BH 0xFFFF2D +#define IOAR0B 0xFFFF2E +#define DTCR0B 0xFFFF2F +#define MAR1AR 0xFFFF30 +#define MAR1AE 0xFFFF31 +#define MAR1AH 0xFFFF32 +#define MAR1AL 0xFFFF33 +#define ETCR1AL 0xFFFF34 +#define ETCR1AH 0xFFFF35 +#define IOAR1A 0xFFFF36 +#define DTCR1A 0xFFFF37 +#define MAR1BR 0xFFFF38 +#define MAR1BE 0xFFFF39 +#define MAR1BH 0xFFFF3A +#define MAR1BL 0xFFFF3B +#define ETCR1BL 0xFFFF3C +#define ETCR1BH 0xFFFF3D +#define IOAR1B 0xFFFF3E +#define DTCR1B 0xFFFF3F + +#define ISCR 0xFEE014 +#define IER 0xFEE015 +#define ISR 0xFEE016 +#define IPRA 0xFEE018 +#define IPRB 0xFEE019 + +#define P1DDR 0xFEE000 +#define P2DDR 0xFEE001 +#define P3DDR 0xFEE002 +#define P4DDR 0xFEE003 +#define P5DDR 0xFEE004 +#define P6DDR 0xFEE005 +/*#define P7DDR 0xFEE006*/ +#define P8DDR 0xFEE007 +#define P9DDR 0xFEE008 +#define PADDR 0xFEE009 +#define PBDDR 0xFEE00A + +#define P1DR 0xFFFFD0 +#define P2DR 0xFFFFD1 +#define P3DR 0xFFFFD2 +#define P4DR 0xFFFFD3 +#define P5DR 0xFFFFD4 +#define P6DR 0xFFFFD5 +/*#define P7DR 0xFFFFD6*/ +#define P8DR 0xFFFFD7 +#define P9DR 0xFFFFD8 +#define PADR 0xFFFFD9 +#define PBDR 0xFFFFDA + +#define P2CR 0xFEE03C +#define P4CR 0xFEE03E +#define P5CR 0xFEE03F + +#define SMR0 0xFFFFB0 +#define BRR0 0xFFFFB1 +#define SCR0 0xFFFFB2 +#define TDR0 0xFFFFB3 +#define SSR0 0xFFFFB4 +#define RDR0 0xFFFFB5 +#define SCMR0 0xFFFFB6 +#define SMR1 0xFFFFB8 +#define BRR1 0xFFFFB9 +#define SCR1 0xFFFFBA +#define TDR1 0xFFFFBB +#define SSR1 0xFFFFBC +#define RDR1 0xFFFFBD +#define SCMR1 0xFFFFBE +#define SMR2 0xFFFFC0 +#define BRR2 0xFFFFC1 +#define SCR2 0xFFFFC2 +#define TDR2 0xFFFFC3 +#define SSR2 0xFFFFC4 +#define RDR2 0xFFFFC5 +#define SCMR2 0xFFFFC6 + +#define MDCR 0xFEE011 +#define SYSCR 0xFEE012 +#define DIVCR 0xFEE01B +#define MSTCRH 0xFEE01C +#define MSTCRL 0xFEE01D +#define FLMCR1 0xFEE030 +#define FLMCR2 0xFEE031 +#define EBR1 0xFEE032 +#define EBR2 0xFEE033 +#define RAMCR 0xFEE077 + +#define TSTR 0xFFFF60 +#define TSNC 0XFFFF61 +#define TMDR 0xFFFF62 +#define TOLR 0xFFFF63 +#define TISRA 0xFFFF64 +#define TISRB 0xFFFF65 +#define TISRC 0xFFFF66 +#define TCR0 0xFFFF68 +#define TIOR0 0xFFFF69 +#define TCNT0H 0xFFFF6A +#define TCNT0L 0xFFFF6B +#define GRA0H 0xFFFF6C +#define GRA0L 0xFFFF6D +#define GRB0H 0xFFFF6E +#define GRB0L 0xFFFF6F +#define TCR1 0xFFFF70 +#define TIOR1 0xFFFF71 +#define TCNT1H 0xFFFF72 +#define TCNT1L 0xFFFF73 +#define GRA1H 0xFFFF74 +#define GRA1L 0xFFFF75 +#define GRB1H 0xFFFF76 +#define GRB1L 0xFFFF77 +#define TCR3 0xFFFF78 +#define TIOR3 0xFFFF79 +#define TCNT3H 0xFFFF7A +#define TCNT3L 0xFFFF7B +#define GRA3H 0xFFFF7C +#define GRA3L 0xFFFF7D +#define GRB3H 0xFFFF7E +#define GRB3L 0xFFFF7F + +#define _8TCR0 0xFFFF80 +#define _8TCR1 0xFFFF81 +#define _8TCSR0 0xFFFF82 +#define _8TCSR1 0xFFFF83 +#define TCORA0 0xFFFF84 +#define TCORA1 0xFFFF85 +#define TCORB0 0xFFFF86 +#define TCORB1 0xFFFF87 +#define _8TCNT0 0xFFFF88 +#define _8TCNT1 0xFFFF89 + +#define _8TCR2 0xFFFF90 +#define _8TCR3 0xFFFF91 +#define _8TCSR2 0xFFFF92 +#define _8TCSR3 0xFFFF93 +#define TCORA2 0xFFFF94 +#define TCORA3 0xFFFF95 +#define TCORB2 0xFFFF96 +#define TCORB3 0xFFFF97 +#define _8TCNT2 0xFFFF98 +#define _8TCNT3 0xFFFF99 + +#define TCSR 0xFFFF8C +#define TCNT 0xFFFF8D +#define RSTCSR 0xFFFF8F + +#define TPMR 0xFFFFA0 +#define TPCR 0xFFFFA1 +#define NDERB 0xFFFFA2 +#define NDERA 0xFFFFA3 +#define NDRB1 0xFFFFA4 +#define NDRA1 0xFFFFA5 +#define NDRB2 0xFFFFA6 +#define NDRA2 0xFFFFA7 + +#define TCSR 0xFFFF8C +#define TCNT 0xFFFF8D +#define RSTCSRW 0xFFFF8E +#define RSTCSRR 0xFFFF8F + +#endif /* __KERNEL__ */ +#endif /* __REGS_H8306x__ */ diff --git a/arch/h8300/include/asm/resource.h b/arch/h8300/include/asm/resource.h new file mode 100644 index 000000000000..46c5f4391607 --- /dev/null +++ b/arch/h8300/include/asm/resource.h @@ -0,0 +1,6 @@ +#ifndef _H8300_RESOURCE_H +#define _H8300_RESOURCE_H + +#include <asm-generic/resource.h> + +#endif /* _H8300_RESOURCE_H */ diff --git a/arch/h8300/include/asm/scatterlist.h b/arch/h8300/include/asm/scatterlist.h new file mode 100644 index 000000000000..d3ecdd87ac90 --- /dev/null +++ b/arch/h8300/include/asm/scatterlist.h @@ -0,0 +1,18 @@ +#ifndef _H8300_SCATTERLIST_H +#define _H8300_SCATTERLIST_H + +#include <asm/types.h> + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + dma_addr_t dma_address; + unsigned int length; +}; + +#define ISA_DMA_THRESHOLD (0xffffffff) + +#endif /* !(_H8300_SCATTERLIST_H) */ diff --git a/arch/h8300/include/asm/sections.h b/arch/h8300/include/asm/sections.h new file mode 100644 index 000000000000..a81743e8b743 --- /dev/null +++ b/arch/h8300/include/asm/sections.h @@ -0,0 +1,6 @@ +#ifndef _H8300_SECTIONS_H_ +#define _H8300_SECTIONS_H_ + +#include <asm-generic/sections.h> + +#endif diff --git a/arch/h8300/include/asm/segment.h b/arch/h8300/include/asm/segment.h new file mode 100644 index 000000000000..b79a82d0f99d --- /dev/null +++ b/arch/h8300/include/asm/segment.h @@ -0,0 +1,49 @@ +#ifndef _H8300_SEGMENT_H +#define _H8300_SEGMENT_H + +/* define constants */ +#define USER_DATA (1) +#ifndef __USER_DS +#define __USER_DS (USER_DATA) +#endif +#define USER_PROGRAM (2) +#define SUPER_DATA (3) +#ifndef __KERNEL_DS +#define __KERNEL_DS (SUPER_DATA) +#endif +#define SUPER_PROGRAM (4) + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) +#define USER_DS MAKE_MM_SEG(__USER_DS) +#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) + +/* + * Get/set the SFC/DFC registers for MOVES instructions + */ + +static inline mm_segment_t get_fs(void) +{ + return USER_DS; +} + +static inline mm_segment_t get_ds(void) +{ + /* return the supervisor data space code */ + return KERNEL_DS; +} + +static inline void set_fs(mm_segment_t val) +{ +} + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#endif /* __ASSEMBLY__ */ + +#endif /* _H8300_SEGMENT_H */ diff --git a/arch/h8300/include/asm/sembuf.h b/arch/h8300/include/asm/sembuf.h new file mode 100644 index 000000000000..e04a3ec0cb92 --- /dev/null +++ b/arch/h8300/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _H8300_SEMBUF_H +#define _H8300_SEMBUF_H + +/* + * The semid64_ds structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _H8300_SEMBUF_H */ diff --git a/arch/h8300/include/asm/setup.h b/arch/h8300/include/asm/setup.h new file mode 100644 index 000000000000..e2c600e96733 --- /dev/null +++ b/arch/h8300/include/asm/setup.h @@ -0,0 +1,6 @@ +#ifndef __H8300_SETUP_H +#define __H8300_SETUP_H + +#define COMMAND_LINE_SIZE 512 + +#endif diff --git a/arch/h8300/include/asm/sh_bios.h b/arch/h8300/include/asm/sh_bios.h new file mode 100644 index 000000000000..b6bb6e58295c --- /dev/null +++ b/arch/h8300/include/asm/sh_bios.h @@ -0,0 +1,29 @@ +/* eCos HAL interface header */ + +#ifndef SH_BIOS_H +#define SH_BIOS_H + +#define HAL_IF_VECTOR_TABLE 0xfffe20 +#define CALL_IF_SET_CONSOLE_COMM 13 +#define QUERY_CURRENT -1 +#define MANGLER -3 + +/* Checking for GDB stub active */ +/* suggestion Jonathan Larmour */ +static int sh_bios_in_gdb_mode(void) +{ + static int gdb_active = -1; + if (gdb_active == -1) { + int (*set_console_comm)(int); + set_console_comm = ((void **)HAL_IF_VECTOR_TABLE)[CALL_IF_SET_CONSOLE_COMM]; + gdb_active = (set_console_comm(QUERY_CURRENT) == MANGLER); + } + return gdb_active; +} + +static void sh_bios_gdb_detach(void) +{ + +} + +#endif diff --git a/arch/h8300/include/asm/shm.h b/arch/h8300/include/asm/shm.h new file mode 100644 index 000000000000..ed6623c0545d --- /dev/null +++ b/arch/h8300/include/asm/shm.h @@ -0,0 +1,31 @@ +#ifndef _H8300_SHM_H +#define _H8300_SHM_H + + +/* format of page table entries that correspond to shared memory pages + currently out in swap space (see also mm/swap.c): + bits 0-1 (PAGE_PRESENT) is = 0 + bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE + bits 31..9 are used like this: + bits 15..9 (SHM_ID) the id of the shared memory segment + bits 30..16 (SHM_IDX) the index of the page within the shared memory segment + (actually only bits 25..16 get used since SHMMAX is so low) + bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach +*/ +/* on the m68k both bits 0 and 1 must be zero */ +/* format on the sun3 is similar, but bits 30, 31 are set to zero and all + others are reduced by 2. --m */ + +#ifndef CONFIG_SUN3 +#define SHM_ID_SHIFT 9 +#else +#define SHM_ID_SHIFT 7 +#endif +#define _SHM_ID_BITS 7 +#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1) + +#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS) +#define _SHM_IDX_BITS 15 +#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1) + +#endif /* _H8300_SHM_H */ diff --git a/arch/h8300/include/asm/shmbuf.h b/arch/h8300/include/asm/shmbuf.h new file mode 100644 index 000000000000..64e77993a7a9 --- /dev/null +++ b/arch/h8300/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _H8300_SHMBUF_H +#define _H8300_SHMBUF_H + +/* + * The shmid64_ds structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _H8300_SHMBUF_H */ diff --git a/arch/h8300/include/asm/shmparam.h b/arch/h8300/include/asm/shmparam.h new file mode 100644 index 000000000000..d1863953ec64 --- /dev/null +++ b/arch/h8300/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _H8300_SHMPARAM_H +#define _H8300_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _H8300_SHMPARAM_H */ diff --git a/arch/h8300/include/asm/sigcontext.h b/arch/h8300/include/asm/sigcontext.h new file mode 100644 index 000000000000..e4b81505f8f8 --- /dev/null +++ b/arch/h8300/include/asm/sigcontext.h @@ -0,0 +1,18 @@ +#ifndef _ASM_H8300_SIGCONTEXT_H +#define _ASM_H8300_SIGCONTEXT_H + +struct sigcontext { + unsigned long sc_mask; /* old sigmask */ + unsigned long sc_usp; /* old user stack pointer */ + unsigned long sc_er0; + unsigned long sc_er1; + unsigned long sc_er2; + unsigned long sc_er3; + unsigned long sc_er4; + unsigned long sc_er5; + unsigned long sc_er6; + unsigned short sc_ccr; + unsigned long sc_pc; +}; + +#endif diff --git a/arch/h8300/include/asm/siginfo.h b/arch/h8300/include/asm/siginfo.h new file mode 100644 index 000000000000..bc8fbea931a5 --- /dev/null +++ b/arch/h8300/include/asm/siginfo.h @@ -0,0 +1,6 @@ +#ifndef _H8300_SIGINFO_H +#define _H8300_SIGINFO_H + +#include <asm-generic/siginfo.h> + +#endif diff --git a/arch/h8300/include/asm/signal.h b/arch/h8300/include/asm/signal.h new file mode 100644 index 000000000000..7bc15048a64f --- /dev/null +++ b/arch/h8300/include/asm/signal.h @@ -0,0 +1,161 @@ +#ifndef _H8300_SIGNAL_H +#define _H8300_SIGNAL_H + +#include <linux/types.h> + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include <asm-generic/signal.h> + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ + +#include <asm/sigcontext.h> +#undef __HAVE_ARCH_SIG_BITOPS + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _H8300_SIGNAL_H */ diff --git a/arch/h8300/include/asm/smp.h b/arch/h8300/include/asm/smp.h new file mode 100644 index 000000000000..9e9bd7e58922 --- /dev/null +++ b/arch/h8300/include/asm/smp.h @@ -0,0 +1 @@ +/* nothing required here yet */ diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h new file mode 100644 index 000000000000..da2520dbf254 --- /dev/null +++ b/arch/h8300/include/asm/socket.h @@ -0,0 +1,57 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include <asm/sockios.h> + +/* For setsockoptions(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/h8300/include/asm/sockios.h b/arch/h8300/include/asm/sockios.h new file mode 100644 index 000000000000..e9c7ec810c23 --- /dev/null +++ b/arch/h8300/include/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef __ARCH_H8300_SOCKIOS__ +#define __ARCH_H8300_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* __ARCH_H8300_SOCKIOS__ */ diff --git a/arch/h8300/include/asm/spinlock.h b/arch/h8300/include/asm/spinlock.h new file mode 100644 index 000000000000..d5407fa173e4 --- /dev/null +++ b/arch/h8300/include/asm/spinlock.h @@ -0,0 +1,6 @@ +#ifndef __H8300_SPINLOCK_H +#define __H8300_SPINLOCK_H + +#error "H8/300 doesn't do SMP yet" + +#endif diff --git a/arch/h8300/include/asm/stat.h b/arch/h8300/include/asm/stat.h new file mode 100644 index 000000000000..62c3cc24dfe6 --- /dev/null +++ b/arch/h8300/include/asm/stat.h @@ -0,0 +1,78 @@ +#ifndef _H8300_STAT_H +#define _H8300_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long __unused1; + unsigned long st_mtime; + unsigned long __unused2; + unsigned long st_ctime; + unsigned long __unused3; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad1[2]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[2]; + + long long st_size; + unsigned long st_blksize; + + unsigned long __pad4; /* future possible st_blocks high bits */ + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#endif /* _H8300_STAT_H */ diff --git a/arch/h8300/include/asm/statfs.h b/arch/h8300/include/asm/statfs.h new file mode 100644 index 000000000000..b96efa712aac --- /dev/null +++ b/arch/h8300/include/asm/statfs.h @@ -0,0 +1,6 @@ +#ifndef _H8300_STATFS_H +#define _H8300_STATFS_H + +#include <asm-generic/statfs.h> + +#endif /* _H8300_STATFS_H */ diff --git a/arch/h8300/include/asm/string.h b/arch/h8300/include/asm/string.h new file mode 100644 index 000000000000..ca5034897d87 --- /dev/null +++ b/arch/h8300/include/asm/string.h @@ -0,0 +1,44 @@ +#ifndef _H8300_STRING_H_ +#define _H8300_STRING_H_ + +#ifdef __KERNEL__ /* only set these up for kernel code */ + +#include <asm/setup.h> +#include <asm/page.h> + +#define __HAVE_ARCH_MEMSET +extern void * memset(void * s, int c, size_t count); + +#define __HAVE_ARCH_MEMCPY +extern void * memcpy(void *d, const void *s, size_t count); + +#else /* KERNEL */ + +/* + * let user libraries deal with these, + * IMHO the kernel has no place defining these functions for user apps + */ + +#define __HAVE_ARCH_STRCPY 1 +#define __HAVE_ARCH_STRNCPY 1 +#define __HAVE_ARCH_STRCAT 1 +#define __HAVE_ARCH_STRNCAT 1 +#define __HAVE_ARCH_STRCMP 1 +#define __HAVE_ARCH_STRNCMP 1 +#define __HAVE_ARCH_STRNICMP 1 +#define __HAVE_ARCH_STRCHR 1 +#define __HAVE_ARCH_STRRCHR 1 +#define __HAVE_ARCH_STRSTR 1 +#define __HAVE_ARCH_STRLEN 1 +#define __HAVE_ARCH_STRNLEN 1 +#define __HAVE_ARCH_MEMSET 1 +#define __HAVE_ARCH_MEMCPY 1 +#define __HAVE_ARCH_MEMMOVE 1 +#define __HAVE_ARCH_MEMSCAN 1 +#define __HAVE_ARCH_MEMCMP 1 +#define __HAVE_ARCH_MEMCHR 1 +#define __HAVE_ARCH_STRTOK 1 + +#endif /* KERNEL */ + +#endif /* _M68K_STRING_H_ */ diff --git a/arch/h8300/include/asm/system.h b/arch/h8300/include/asm/system.h new file mode 100644 index 000000000000..4b8e475908ae --- /dev/null +++ b/arch/h8300/include/asm/system.h @@ -0,0 +1,158 @@ +#ifndef _H8300_SYSTEM_H +#define _H8300_SYSTEM_H + +#include <linux/linkage.h> + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. This + * also clears the TS-flag if the task we switched to has used the + * math co-processor latest. + */ +/* + * switch_to() saves the extra registers, that are not saved + * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and + * a0-a1. Some of these are used by schedule() and its predecessors + * and so we might get see unexpected behaviors when a task returns + * with unexpected register values. + * + * syscall stores these registers itself and none of them are used + * by syscall after the function in the syscall has been called. + * + * Beware that resume now expects *next to be in d1 and the offset of + * tss to be in a1. This saves a few instructions as we no longer have + * to push them onto the stack and read them back right after. + * + * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) + * + * Changed 96/09/19 by Andreas Schwab + * pass prev in a0, next in a1, offset of tss in d1, and whether + * the mm structures are shared in d2 (to avoid atc flushing). + * + * H8/300 Porting 2002/09/04 Yoshinori Sato + */ + +asmlinkage void resume(void); +#define switch_to(prev,next,last) { \ + void *_last; \ + __asm__ __volatile__( \ + "mov.l %1, er0\n\t" \ + "mov.l %2, er1\n\t" \ + "mov.l %3, er2\n\t" \ + "jsr @_resume\n\t" \ + "mov.l er2,%0\n\t" \ + : "=r" (_last) \ + : "r" (&(prev->thread)), \ + "r" (&(next->thread)), \ + "g" (prev) \ + : "cc", "er0", "er1", "er2", "er3"); \ + (last) = _last; \ +} + +#define __sti() asm volatile ("andc #0x7f,ccr") +#define __cli() asm volatile ("orc #0x80,ccr") + +#define __save_flags(x) \ + asm volatile ("stc ccr,%w0":"=r" (x)) + +#define __restore_flags(x) \ + asm volatile ("ldc %w0,ccr": :"r" (x)) + +#define irqs_disabled() \ +({ \ + unsigned char flags; \ + __save_flags(flags); \ + ((flags & 0x80) == 0x80); \ +}) + +#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc") + +/* For spinlocks etc */ +#define local_irq_disable() __cli() +#define local_irq_enable() __sti() +#define local_irq_save(x) ({ __save_flags(x); local_irq_disable(); }) +#define local_irq_restore(x) __restore_flags(x) +#define local_save_flags(x) __save_flags(x) + +/* + * Force strict CPU ordering. + * Not really required on H8... + */ +#define nop() asm volatile ("nop"::) +#define mb() asm volatile ("" : : :"memory") +#define rmb() asm volatile ("" : : :"memory") +#define wmb() asm volatile ("" : : :"memory") +#define set_mb(var, value) do { xchg(&var, value); } while (0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((volatile struct __xchg_dummy *)(x)) + +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + unsigned long tmp, flags; + + local_irq_save(flags); + + switch (size) { + case 1: + __asm__ __volatile__ + ("mov.b %2,%0\n\t" + "mov.b %1,%2" + : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 2: + __asm__ __volatile__ + ("mov.w %2,%0\n\t" + "mov.w %1,%2" + : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 4: + __asm__ __volatile__ + ("mov.l %2,%0\n\t" + "mov.l %1,%2" + : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory"); + break; + default: + tmp = 0; + } + local_irq_restore(flags); + return tmp; +} + +#define HARD_RESET_NOW() ({ \ + local_irq_disable(); \ + asm("jmp @@0"); \ +}) + +#include <asm-generic/cmpxchg-local.h> + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#ifndef CONFIG_SMP +#include <asm-generic/cmpxchg.h> +#endif + +#define arch_align_stack(x) (x) + +#endif /* _H8300_SYSTEM_H */ diff --git a/arch/h8300/include/asm/target_time.h b/arch/h8300/include/asm/target_time.h new file mode 100644 index 000000000000..9f2a9aa1fe6f --- /dev/null +++ b/arch/h8300/include/asm/target_time.h @@ -0,0 +1,4 @@ +extern int platform_timer_setup(void (*timer_int)(int, void *, struct pt_regs *)); +extern void platform_timer_eoi(void); +extern void platform_gettod(unsigned int *year, unsigned int *mon, unsigned int *day, + unsigned int *hour, unsigned int *min, unsigned int *sec); diff --git a/arch/h8300/include/asm/termbits.h b/arch/h8300/include/asm/termbits.h new file mode 100644 index 000000000000..31eca81db3f7 --- /dev/null +++ b/arch/h8300/include/asm/termbits.h @@ -0,0 +1,200 @@ +#ifndef __ARCH_H8300_TERMBITS_H__ +#define __ARCH_H8300_TERMBITS_H__ + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ARCH_H8300_TERMBITS_H__ */ diff --git a/arch/h8300/include/asm/termios.h b/arch/h8300/include/asm/termios.h new file mode 100644 index 000000000000..70eea64b4213 --- /dev/null +++ b/arch/h8300/include/asm/termios.h @@ -0,0 +1,92 @@ +#ifndef _H8300_TERMIOS_H +#define _H8300_TERMIOS_H + +#include <asm/termbits.h> +#include <asm/ioctls.h> + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#ifdef __KERNEL__ +/* intr=^C quit=^| erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" +#endif + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + unsigned short tmp; \ + get_user(tmp, &(termio)->c_iflag); \ + (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ + get_user(tmp, &(termio)->c_oflag); \ + (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ + get_user(tmp, &(termio)->c_cflag); \ + (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ + get_user(tmp, &(termio)->c_lflag); \ + (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ + get_user((termios)->c_line, &(termio)->c_line); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* _H8300_TERMIOS_H */ diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h new file mode 100644 index 000000000000..aafd4d322ec3 --- /dev/null +++ b/arch/h8300/include/asm/thread_info.h @@ -0,0 +1,104 @@ +/* thread_info.h: h8300 low-level thread information + * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#include <asm/page.h> + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +/* + * low level task data. + * If you change this, change the TI_* offsets below to match. + */ +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + int cpu; /* cpu we're on */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + struct restart_block restart_block; +}; + +/* + * macros/functions for gaining access to the thread information structure + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + + +/* + * Size of kernel stack for each process. This must be a power of 2... + */ +#define THREAD_SIZE_ORDER 1 +#define THREAD_SIZE 8192 /* 2 pages */ + + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + __asm__( + "mov.l sp, %0 \n\t" + "and.l %1, %0" + : "=&r"(ti) + : "i" (~(THREAD_SIZE-1)) + ); + return ti; +} + +#endif /* __ASSEMBLY__ */ + +/* + * Offsets in thread_info structure, used in assembly code + */ +#define TI_TASK 0 +#define TI_EXECDOMAIN 4 +#define TI_FLAGS 8 +#define TI_CPU 12 +#define TI_PRE_COUNT 16 + +#define PREEMPT_ACTIVE 0x4000000 + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling + TIF_NEED_RESCHED */ +#define TIF_MEMDIE 4 +#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) +#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) + +#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/h8300/include/asm/timex.h b/arch/h8300/include/asm/timex.h new file mode 100644 index 000000000000..23e67013439f --- /dev/null +++ b/arch/h8300/include/asm/timex.h @@ -0,0 +1,19 @@ +/* + * linux/include/asm-h8300/timex.h + * + * H8/300 architecture timex specifications + */ +#ifndef _ASM_H8300_TIMEX_H +#define _ASM_H8300_TIMEX_H + +#define CLOCK_TICK_RATE (CONFIG_CPU_CLOCK*1000/8192) /* Timer input freq. */ + +typedef unsigned long cycles_t; +extern short h8300_timer_count; + +static inline cycles_t get_cycles(void) +{ + return 0; +} + +#endif diff --git a/arch/h8300/include/asm/tlb.h b/arch/h8300/include/asm/tlb.h new file mode 100644 index 000000000000..3dea80ad9e6f --- /dev/null +++ b/arch/h8300/include/asm/tlb.h @@ -0,0 +1,23 @@ +/* + include/asm-h8300/tlb.h +*/ + +#ifndef __H8300_TLB_H__ +#define __H8300_TLB_H__ + +#define tlb_flush(tlb) do { } while(0) + +/* + include/asm-h8300/tlb.h +*/ + +#ifndef __H8300_TLB_H__ +#define __H8300_TLB_H__ + +#define tlb_flush(tlb) do { } while(0) + +#include <asm-generic/tlb.h> + +#endif + +#endif diff --git a/arch/h8300/include/asm/tlbflush.h b/arch/h8300/include/asm/tlbflush.h new file mode 100644 index 000000000000..41c148a9208e --- /dev/null +++ b/arch/h8300/include/asm/tlbflush.h @@ -0,0 +1,55 @@ +#ifndef _H8300_TLBFLUSH_H +#define _H8300_TLBFLUSH_H + +/* + * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org> + * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com> + */ + +#include <asm/setup.h> + +/* + * flush all user-space atc entries. + */ +static inline void __flush_tlb(void) +{ + BUG(); +} + +static inline void __flush_tlb_one(unsigned long addr) +{ + BUG(); +} + +#define flush_tlb() __flush_tlb() + +/* + * flush all atc entries (both kernel and user-space entries). + */ +static inline void flush_tlb_all(void) +{ + BUG(); +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + BUG(); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) +{ + BUG(); +} + +static inline void flush_tlb_range(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + BUG(); +} + +static inline void flush_tlb_kernel_page(unsigned long addr) +{ + BUG(); +} + +#endif /* _H8300_TLBFLUSH_H */ diff --git a/arch/h8300/include/asm/topology.h b/arch/h8300/include/asm/topology.h new file mode 100644 index 000000000000..fdc121924d4c --- /dev/null +++ b/arch/h8300/include/asm/topology.h @@ -0,0 +1,6 @@ +#ifndef _ASM_H8300_TOPOLOGY_H +#define _ASM_H8300_TOPOLOGY_H + +#include <asm-generic/topology.h> + +#endif /* _ASM_H8300_TOPOLOGY_H */ diff --git a/arch/h8300/include/asm/traps.h b/arch/h8300/include/asm/traps.h new file mode 100644 index 000000000000..41cf6be02f68 --- /dev/null +++ b/arch/h8300/include/asm/traps.h @@ -0,0 +1,37 @@ +/* + * linux/include/asm-h8300/traps.h + * + * Copyright (C) 2003 Yoshinori Sato <ysato@users.sourceforge.jp> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _H8300_TRAPS_H +#define _H8300_TRAPS_H + +extern void system_call(void); +extern void interrupt_entry(void); +extern void trace_break(void); + +#define JMP_OP 0x5a000000 +#define JSR_OP 0x5e000000 +#define VECTOR(address) ((JMP_OP)|((unsigned long)address)) +#define REDIRECT(address) ((JSR_OP)|((unsigned long)address)) + +#define TRACE_VEC 5 + +#define TRAP0_VEC 8 +#define TRAP1_VEC 9 +#define TRAP2_VEC 10 +#define TRAP3_VEC 11 + +#if defined(__H8300H__) +#define NR_TRAPS 12 +#endif +#if defined(__H8300S__) +#define NR_TRAPS 16 +#endif + +#endif /* _H8300_TRAPS_H */ diff --git a/arch/h8300/include/asm/types.h b/arch/h8300/include/asm/types.h new file mode 100644 index 000000000000..12875190b156 --- /dev/null +++ b/arch/h8300/include/asm/types.h @@ -0,0 +1,33 @@ +#ifndef _H8300_TYPES_H +#define _H8300_TYPES_H + +#include <asm-generic/int-ll64.h> + +#if !defined(__ASSEMBLY__) + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ + +typedef unsigned short umode_t; + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#endif /* __KERNEL__ */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _H8300_TYPES_H */ diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h new file mode 100644 index 000000000000..356068cd0879 --- /dev/null +++ b/arch/h8300/include/asm/uaccess.h @@ -0,0 +1,162 @@ +#ifndef __H8300_UACCESS_H +#define __H8300_UACCESS_H + +/* + * User space memory access functions + */ +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/string.h> + +#include <asm/segment.h> + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* We let the MMU do all checking */ +#define access_ok(type, addr, size) __access_ok((unsigned long)addr,size) +static inline int __access_ok(unsigned long addr, unsigned long size) +{ +#define RANGE_CHECK_OK(addr, size, lower, upper) \ + (((addr) >= (lower)) && (((addr) + (size)) < (upper))) + + extern unsigned long _ramend; + return(RANGE_CHECK_OK(addr, size, 0L, (unsigned long)&_ramend)); +} + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ + +#define put_user(x, ptr) \ +({ \ + int __pu_err = 0; \ + typeof(*(ptr)) __pu_val = (x); \ + switch (sizeof (*(ptr))) { \ + case 1: \ + case 2: \ + case 4: \ + *(ptr) = (__pu_val); \ + break; \ + case 8: \ + memcpy(ptr, &__pu_val, sizeof (*(ptr))); \ + break; \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + __pu_err; \ +}) +#define __put_user(x, ptr) put_user(x, ptr) + +extern int __put_user_bad(void); + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ + +#define __ptr(x) ((unsigned long *)(x)) + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ + +#define get_user(x, ptr) \ +({ \ + int __gu_err = 0; \ + typeof(*(ptr)) __gu_val = *ptr; \ + switch (sizeof(*(ptr))) { \ + case 1: \ + case 2: \ + case 4: \ + case 8: \ + break; \ + default: \ + __gu_err = __get_user_bad(); \ + __gu_val = 0; \ + break; \ + } \ + (x) = __gu_val; \ + __gu_err; \ +}) +#define __get_user(x, ptr) get_user(x, ptr) + +extern int __get_user_bad(void); + +#define copy_from_user(to, from, n) (memcpy(to, from, n), 0) +#define copy_to_user(to, from, n) (memcpy(to, from, n), 0) + +#define __copy_from_user(to, from, n) copy_from_user(to, from, n) +#define __copy_to_user(to, from, n) copy_to_user(to, from, n) +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; }) + +#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; }) + +/* + * Copy a null terminated string from userspace. + */ + +static inline long +strncpy_from_user(char *dst, const char *src, long count) +{ + char *tmp; + strncpy(dst, src, count); + for (tmp = dst; *tmp && count > 0; tmp++, count--) + ; + return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */ +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 on exception, a value greater than N if too long + */ +static inline long strnlen_user(const char *src, long n) +{ + return(strlen(src) + 1); /* DAVIDM make safer */ +} + +#define strlen_user(str) strnlen_user(str, 32767) + +/* + * Zero Userspace + */ + +static inline unsigned long +clear_user(void *to, unsigned long n) +{ + memset(to, 0, n); + return 0; +} + +#endif /* _H8300_UACCESS_H */ diff --git a/arch/h8300/include/asm/ucontext.h b/arch/h8300/include/asm/ucontext.h new file mode 100644 index 000000000000..0bcf8f85fab9 --- /dev/null +++ b/arch/h8300/include/asm/ucontext.h @@ -0,0 +1,12 @@ +#ifndef _H8300_UCONTEXT_H +#define _H8300_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif diff --git a/arch/h8300/include/asm/unaligned.h b/arch/h8300/include/asm/unaligned.h new file mode 100644 index 000000000000..b8d06c70c2da --- /dev/null +++ b/arch/h8300/include/asm/unaligned.h @@ -0,0 +1,11 @@ +#ifndef _ASM_H8300_UNALIGNED_H +#define _ASM_H8300_UNALIGNED_H + +#include <linux/unaligned/be_memmove.h> +#include <linux/unaligned/le_byteshift.h> +#include <linux/unaligned/generic.h> + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* _ASM_H8300_UNALIGNED_H */ diff --git a/arch/h8300/include/asm/unistd.h b/arch/h8300/include/asm/unistd.h new file mode 100644 index 000000000000..99f3c3561ecb --- /dev/null +++ b/arch/h8300/include/asm/unistd.h @@ -0,0 +1,364 @@ +#ifndef _ASM_H8300_UNISTD_H_ +#define _ASM_H8300_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_madvise1 219 +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +/* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 +/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */ +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +/* #define __NR_sys_setaltroot 285 */ +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#define __NR_inotify_init 291 +#define __NR_inotify_add_watch 292 +#define __NR_inotify_rm_watch 293 +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 + +#ifdef __KERNEL__ + +#define NR_syscalls 320 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION + +/* + * "Conditional" syscalls + */ +#define cond_syscall(name) \ + asm (".weak\t_" #name "\n" \ + ".set\t_" #name ",_sys_ni_syscall"); + +#endif /* __KERNEL__ */ +#endif /* _ASM_H8300_UNISTD_H_ */ diff --git a/arch/h8300/include/asm/user.h b/arch/h8300/include/asm/user.h new file mode 100644 index 000000000000..14a9e18950f1 --- /dev/null +++ b/arch/h8300/include/asm/user.h @@ -0,0 +1,75 @@ +#ifndef _H8300_USER_H +#define _H8300_USER_H + +#include <asm/page.h> + +/* Core file format: The core file is written in such a way that gdb + can understand it and provide useful information to the user (under + linux we use the 'trad-core' bfd). There are quite a number of + obstacles to being able to view the contents of the floating point + registers, and until these are solved you will not be able to view the + contents of them. Actually, you can read in the core file and look at + the contents of the user struct to find out what the floating point + registers contain. + The actual file contents are as follows: + UPAGE: 1 page consisting of a user struct that tells gdb what is present + in the file. Directly after this is a copy of the task_struct, which + is currently not used by gdb, but it may come in useful at some point. + All of the registers are stored as part of the upage. The upage should + always be only one page. + DATA: The data area is stored. We use current->end_text to + current->brk to pick up all of the user variables, plus any memory + that may have been malloced. No attempt is made to determine if a page + is demand-zero or if a page is totally unused, we just cover the entire + range. All of the addresses are rounded in such a way that an integral + number of pages is written. + STACK: We need the stack information in order to get a meaningful + backtrace. We need to write the data from (esp) to + current->start_stack, so we round each of these off in order to be able + to write an integer number of pages. + The minimum core file size is 3 pages, or 12288 bytes. +*/ + +/* This is the old layout of "struct pt_regs" as of Linux 1.x, and + is still the layout used by user (the new pt_regs doesn't have + all registers). */ +struct user_regs_struct { + long er1,er2,er3,er4,er5,er6; + long er0; + long usp; + long orig_er0; + short ccr; + long pc; +}; + + +/* When the kernel dumps core, it starts by dumping the user struct - + this will be used by gdb to figure out where the data and stack segments + are within the file, and what virtual addresses to use. */ +struct user{ +/* We start with the registers, to mimic the way that "memory" is returned + from the ptrace(3,...) function. */ + struct user_regs_struct regs; /* Where the registers are actually stored */ +/* ptrace does not yet supply these. Someday.... */ +/* The rest of this junk is to help gdb figure out what goes where */ + unsigned long int u_tsize; /* Text segment size (pages). */ + unsigned long int u_dsize; /* Data segment size (pages). */ + unsigned long int u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + This is actually the bottom of the stack, + the top of the stack is always found in the + esp register. */ + long int signal; /* Signal that caused the core dump. */ + int reserved; /* No longer used */ + unsigned long u_ar0; /* Used by gdb to help find the values for */ + /* the registers. */ + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ +}; +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif diff --git a/arch/h8300/include/asm/virtconvert.h b/arch/h8300/include/asm/virtconvert.h new file mode 100644 index 000000000000..19cfd62b11c3 --- /dev/null +++ b/arch/h8300/include/asm/virtconvert.h @@ -0,0 +1,20 @@ +#ifndef __H8300_VIRT_CONVERT__ +#define __H8300_VIRT_CONVERT__ + +/* + * Macros used for converting between virtual and physical mappings. + */ + +#ifdef __KERNEL__ + +#include <asm/setup.h> +#include <asm/page.h> + +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +#endif +#endif diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c index a1d228f5e4e6..9942f24aff9e 100644 --- a/arch/h8300/mm/init.c +++ b/arch/h8300/mm/init.c @@ -40,9 +40,6 @@ #undef DEBUG -extern void die_if_kernel(char *,struct pt_regs *,long); -extern void free_initmem(void); - /* * BAD_PAGE is the page that is used for page faults when linux * is out-of-memory. Older versions of linux just did a @@ -73,7 +70,7 @@ extern unsigned long memory_end; * The parameters are pointers to where to stick the starting and ending * addresses of available kernel virtual memory. */ -void paging_init(void) +void __init paging_init(void) { /* * Make sure start_mem is page aligned, otherwise bootmem and @@ -122,7 +119,7 @@ void paging_init(void) } } -void mem_init(void) +void __init mem_init(void) { int codek = 0, datak = 0, initk = 0; /* DAVIDM look at setup memory map generically with reserved area */ @@ -178,7 +175,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) #endif void -free_initmem() +free_initmem(void) { #ifdef CONFIG_RAMKERNEL unsigned long addr; diff --git a/arch/ia64/include/asm/kexec.h b/arch/ia64/include/asm/kexec.h index 541be835fc5a..e1d58f819d78 100644 --- a/arch/ia64/include/asm/kexec.h +++ b/arch/ia64/include/asm/kexec.h @@ -9,7 +9,7 @@ /* Maximum address we can use for the control code buffer */ #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE -#define KEXEC_CONTROL_CODE_SIZE (8192 + 8192 + 4096) +#define KEXEC_CONTROL_PAGE_SIZE (8192 + 8192 + 4096) /* The native architecture */ #define KEXEC_ARCH KEXEC_ARCH_IA_64 diff --git a/arch/ia64/include/asm/sal.h b/arch/ia64/include/asm/sal.h index 89594b442f83..ea310c0812aa 100644 --- a/arch/ia64/include/asm/sal.h +++ b/arch/ia64/include/asm/sal.h @@ -236,7 +236,7 @@ extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info; extern unsigned short sal_revision; /* supported SAL spec revision */ extern unsigned short sal_version; /* SAL version; OEM dependent */ -#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor)) +#define SAL_VERSION_CODE(major, minor) ((bin2bcd(major) << 8) | bin2bcd(minor)) extern const char *ia64_sal_strerror (long status); extern void ia64_sal_init (struct ia64_sal_systab *sal_systab); diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index 41c712917ff7..8bdea8eb62e3 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -359,7 +359,31 @@ start_ap: mov ar.rsc=0 // place RSE in enforced lazy mode ;; loadrs // clear the dirty partition - mov IA64_KR(PER_CPU_DATA)=r0 // clear physical per-CPU base + movl r19=__phys_per_cpu_start + mov r18=PERCPU_PAGE_SIZE + ;; +#ifndef CONFIG_SMP + add r19=r19,r18 + ;; +#else +(isAP) br.few 2f + mov r20=r19 + sub r19=r19,r18 + ;; + shr.u r18=r18,3 +1: + ld8 r21=[r20],8;; + st8[r19]=r21,8 + adds r18=-1,r18;; + cmp4.lt p7,p6=0,r18 +(p7) br.cond.dptk.few 1b +2: +#endif + tpa r19=r19 + ;; + .pred.rel.mutex isBP,isAP +(isBP) mov IA64_KR(PER_CPU_DATA)=r19 // per-CPU base for cpu0 +(isAP) mov IA64_KR(PER_CPU_DATA)=r0 // clear physical per-CPU base ;; mov ar.bspstore=r2 // establish the new RSE stack ;; diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 593279f33e96..c27d5b2c182b 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -927,17 +927,19 @@ cpu_init (void) if (smp_processor_id() == 0) { cpu_set(0, per_cpu(cpu_sibling_map, 0)); cpu_set(0, cpu_core_map[0]); + } else { + /* + * Set ar.k3 so that assembly code in MCA handler can compute + * physical addresses of per cpu variables with a simple: + * phys = ar.k3 + &per_cpu_var + * and the alt-dtlb-miss handler can set per-cpu mapping into + * the TLB when needed. head.S already did this for cpu0. + */ + ia64_set_kr(IA64_KR_PER_CPU_DATA, + ia64_tpa(cpu_data) - (long) __per_cpu_start); } #endif - /* - * We set ar.k3 so that assembly code in MCA handler can compute - * physical addresses of per cpu variables with a simple: - * phys = ar.k3 + &per_cpu_var - */ - ia64_set_kr(IA64_KR_PER_CPU_DATA, - ia64_tpa(cpu_data) - (long) __per_cpu_start); - get_max_cacheline_size(); /* diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 03f1a9908afc..b39853a292d5 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -467,7 +467,9 @@ start_secondary (void *unused) { /* Early console may use I/O ports */ ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase)); +#ifndef CONFIG_PRINTK_TIME Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id()); +#endif efi_map_pal_code(); cpu_init(); preempt_disable(); diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 5a77206c2492..de71da811cd6 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -215,6 +215,9 @@ SECTIONS /* Per-cpu data: */ percpu : { } :percpu . = ALIGN(PERCPU_PAGE_SIZE); +#ifdef CONFIG_SMP + . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */ +#endif __phys_per_cpu_start = .; .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET) { diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 798bf9835a51..e566ff43884a 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -163,8 +163,14 @@ per_cpu_init (void) * get_zeroed_page(). */ if (first_time) { + void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE; + first_time=0; - for (cpu = 0; cpu < NR_CPUS; cpu++) { + + __per_cpu_offset[0] = (char *) cpu0_data - __per_cpu_start; + per_cpu(local_per_cpu_offset, 0) = __per_cpu_offset[0]; + + for (cpu = 1; cpu < NR_CPUS; cpu++) { memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start); __per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start; cpu_data += PERCPU_PAGE_SIZE; @@ -177,7 +183,7 @@ per_cpu_init (void) static inline void alloc_per_cpu_data(void) { - cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS, + cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS-1, PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); } #else diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index d83125e1ed27..78026aabaa7f 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -143,7 +143,11 @@ static void *per_cpu_node_setup(void *cpu_data, int node) int cpu; for_each_possible_early_cpu(cpu) { - if (node == node_cpuid[cpu].nid) { + if (cpu == 0) { + void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE; + __per_cpu_offset[cpu] = (char*)cpu0_data - + __per_cpu_start; + } else if (node == node_cpuid[cpu].nid) { memcpy(__va(cpu_data), __phys_per_cpu_start, __per_cpu_end - __per_cpu_start); __per_cpu_offset[cpu] = (char*)__va(cpu_data) - diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 18a9c5f4b00d..f28404d9a2bc 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -747,4 +747,10 @@ sys_call_table: .long sys_fallocate /* 320 */ .long sys_timerfd_settime .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 /* 325 */ + .long sys_dup3 + .long sys_pipe2 + .long sys_inotify_init1 diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68knommu/include/asm/unistd.h index 4ba98b9c5d79..b034a2f7b444 100644 --- a/arch/m68knommu/include/asm/unistd.h +++ b/arch/m68knommu/include/asm/unistd.h @@ -326,10 +326,16 @@ #define __NR_fallocate 320 #define __NR_timerfd_settime 321 #define __NR_timerfd_gettime 322 +#define __NR_signalfd4 323 +#define __NR_eventfd2 324 +#define __NR_epoll_create1 325 +#define __NR_dup3 326 +#define __NR_pipe2 327 +#define __NR_inotify_init1 328 #ifdef __KERNEL__ -#define NR_syscalls 323 +#define NR_syscalls 329 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S index fca2e49917a3..812f8d8b7a85 100644 --- a/arch/m68knommu/kernel/syscalltable.S +++ b/arch/m68knommu/kernel/syscalltable.S @@ -341,6 +341,12 @@ ENTRY(sys_call_table) .long sys_fallocate /* 320 */ .long sys_timerfd_settime .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 /* 325 */ + .long sys_dup3 + .long sys_pipe2 + .long sys_inotify_init1 .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 63c9cafda9c4..587da5e0990f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -42,9 +42,6 @@ config GENERIC_HARDIRQS bool default y -config HAVE_GET_USER_PAGES_FAST - def_bool PPC64 - config HAVE_SETUP_PER_CPU_AREA def_bool PPC64 diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index 340018cf16b7..f4e4ba69eef7 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -139,6 +139,11 @@ interrupt-parent = <&UIC0>; }; + fpga@2,2000 { + compatible = "pika,fpga-sgl"; + reg = <0x00000002 0x00002000 0x00000200>; + }; + fpga@2,4000 { compatible = "pika,fpga-sd"; reg = <0x00000002 0x00004000 0x00000A00>; @@ -152,7 +157,7 @@ #size-cells = <1>; partition@300000 { label = "fpga"; - reg = <0x0030000 0x00040000>; + reg = <0x0300000 0x00040000>; }; partition@340000 { label = "env"; @@ -181,7 +186,6 @@ reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; - index = <0x0>; #address-cells = <1>; #size-cells = <0>; @@ -191,6 +195,12 @@ interrupts = <0x19 0x8>; interrupt-parent = <&UIC0>; }; + + /* This will create 52 and 53 */ + at24@52 { + compatible = "at,24c04"; + reg = <0x52>; + }; }; GPIO0: gpio@ef600b00 { @@ -209,7 +219,13 @@ led@31 { compatible = "linux,gpio-led"; linux,name = ":green:"; - gpios = <&GPIO1 0x30 0>; + gpios = <&GPIO1 31 0>; + }; + + led@30 { + compatible = "linux,gpio-led"; + linux,name = ":red:"; + gpios = <&GPIO1 30 0>; }; }; diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index e24240a9a047..2113ae2ab401 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:50:09 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:34:03 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -188,7 +201,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -206,13 +218,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -222,6 +238,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -232,6 +250,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -241,17 +260,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -289,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -340,6 +353,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -352,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -576,6 +598,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -614,12 +637,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -635,13 +655,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -658,10 +689,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -678,12 +705,16 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -701,6 +732,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -744,17 +776,16 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -769,7 +800,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -818,6 +848,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -828,14 +859,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -856,8 +885,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -867,6 +898,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -874,6 +906,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -881,9 +914,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -896,17 +932,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -918,51 +967,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 2f475391f1d1..565ed9666c54 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:51:43 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:36:14 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -186,7 +199,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -204,13 +216,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -689,6 +712,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -699,14 +723,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -738,6 +762,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 9ef4d8a312c8..987a4481800f 100644 --- a/arch/powerpc/configs/40x/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:52:30 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:38:39 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -186,7 +199,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -204,13 +216,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -689,6 +712,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -699,14 +723,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -738,6 +762,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index 3b2689e5002a..aee79338f41f 100644 --- a/arch/powerpc/configs/40x/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:54:12 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:40:56 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -189,7 +202,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -207,13 +219,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -223,6 +239,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -233,6 +251,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -242,17 +261,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -290,8 +305,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -341,6 +354,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -353,6 +368,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -567,6 +589,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -605,12 +628,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -626,13 +646,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -649,16 +680,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -667,13 +696,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -688,7 +715,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -737,6 +763,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -747,14 +774,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -775,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -786,6 +813,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -793,6 +821,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -800,9 +829,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -815,17 +847,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -837,51 +882,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig index c44db554cdc6..e920693535af 100644 --- a/arch/powerpc/configs/44x/bamboo_defconfig +++ b/arch/powerpc/configs/44x/bamboo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:36:39 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 08:43:44 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -112,13 +118,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -129,6 +144,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_BAMBOO=y # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -193,7 +210,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -211,14 +227,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -227,6 +247,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -237,6 +259,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,17 +269,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -294,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -345,6 +362,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -370,12 +389,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -393,12 +414,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -433,7 +457,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -443,12 +466,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -461,6 +484,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -468,6 +492,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -494,6 +519,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -532,12 +558,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -553,13 +576,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -576,16 +610,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -594,13 +626,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -615,7 +645,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -663,6 +692,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -673,14 +703,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -701,8 +729,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -712,6 +742,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -719,6 +750,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -726,9 +758,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -741,19 +776,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -765,51 +811,85 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index a3b763c45ec6..74da5c7754a4 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc1 -# Thu Feb 21 14:29:28 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 08:46:14 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -73,8 +77,9 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,12 +88,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y -# CONFIG_LOGBUFFER is not set CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_COMPAT_BRK=y @@ -109,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -126,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -140,25 +155,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set CONFIG_CANYONLANDS=y +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_460EX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -190,7 +205,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -208,16 +222,19 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y CONFIG_ISA_DMA_API=y # @@ -225,6 +242,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +254,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +264,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +357,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -368,6 +384,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -386,12 +403,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -430,6 +450,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -456,6 +477,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -494,16 +516,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -515,13 +535,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -538,22 +569,16 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -568,7 +593,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -616,6 +640,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -626,14 +651,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -654,8 +677,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -665,6 +690,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -672,6 +698,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -679,9 +706,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -694,19 +724,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -719,3 +760,4 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig index 07c8d4ce175a..17615750b494 100644 --- a/arch/powerpc/configs/44x/ebony_defconfig +++ b/arch/powerpc/configs/44x/ebony_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:50:44 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:04:12 2008 # # CONFIG_PPC64 is not set @@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -111,13 +117,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set CONFIG_EBONY=y +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440GP=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -192,7 +209,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y @@ -210,13 +226,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -444,12 +464,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -467,12 +489,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -507,7 +532,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -517,12 +541,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -535,6 +559,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -542,6 +567,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -568,6 +594,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -606,12 +633,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -627,13 +651,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -650,16 +685,14 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -668,13 +701,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -689,7 +720,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -748,6 +778,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -758,14 +789,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -786,8 +815,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -798,6 +829,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -805,6 +837,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -812,9 +845,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -827,17 +863,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -849,50 +898,84 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index c8804ec01ea4..7bc4082a1c93 100644 --- a/arch/powerpc/configs/44x/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Mon Dec 24 11:17:43 2007 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:06:51 2008 # # CONFIG_PPC64 is not set @@ -29,7 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -67,23 +72,22 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -91,11 +95,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -103,10 +109,26 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -117,6 +139,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -130,23 +153,28 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set CONFIG_KATMAI=y # CONFIG_RAINIER is not set +# CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440SPe=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -157,7 +185,6 @@ CONFIG_440SPe=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -173,13 +200,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -190,17 +221,19 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="katmai.dts" CONFIG_ISA_DMA_API=y # @@ -208,6 +241,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -218,6 +253,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -227,17 +263,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -275,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -300,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -325,6 +356,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -346,15 +379,19 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -371,6 +408,10 @@ CONFIG_MISC_DEVICES=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -378,14 +419,12 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -414,6 +453,8 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -421,12 +462,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -438,6 +479,8 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -445,12 +488,12 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -472,7 +515,9 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -509,15 +554,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -529,13 +573,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -552,34 +607,27 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -594,14 +642,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -643,8 +688,11 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -652,14 +700,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -675,14 +721,15 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -692,10 +739,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -703,6 +747,7 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -710,10 +755,14 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -724,19 +773,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -747,44 +807,85 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig index dec18ca73519..0479648a9141 100644 --- a/arch/powerpc/configs/44x/rainier_defconfig +++ b/arch/powerpc/configs/44x/rainier_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:53:10 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:09:35 2008 # # CONFIG_PPC64 is not set @@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -111,13 +117,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set CONFIG_RAINIER=y # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440GRX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -191,7 +208,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y @@ -209,14 +225,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -445,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -468,6 +490,10 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -475,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -492,7 +517,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -502,12 +526,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -520,6 +544,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -527,6 +552,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -553,6 +579,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -591,12 +618,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -612,13 +636,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -635,16 +670,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -653,13 +686,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -674,7 +705,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -733,6 +763,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -743,14 +774,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -771,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -783,6 +814,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -790,6 +822,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -797,9 +830,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -812,19 +848,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y @@ -849,51 +896,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index 9ce5cbc2a4e7..0ed2de05f4e8 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Mon May 5 13:43:02 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:12:48 2008 # # CONFIG_PPC64 is not set @@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -116,15 +118,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -135,6 +144,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -154,8 +164,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -169,6 +177,7 @@ CONFIG_SAM440EP=y # CONFIG_WARP is not set # CONFIG_CANYONLANDS is not set # CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -220,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -228,6 +238,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -237,6 +248,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -263,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -353,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y @@ -379,6 +389,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -422,6 +433,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_PMP is not set @@ -481,18 +493,22 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -531,7 +547,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # @@ -607,12 +622,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -661,40 +678,60 @@ CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IBM_IIC=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -703,10 +740,13 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -718,6 +758,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -730,6 +771,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -755,7 +797,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set CONFIG_FB_MACMODES=y CONFIG_FB_BACKLIGHT=y @@ -795,10 +836,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set @@ -821,10 +865,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -859,11 +899,13 @@ CONFIG_USB_DEVICEFS=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -881,6 +923,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -900,6 +943,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -939,6 +983,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -976,6 +1021,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_M41T80_WDT=y # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -996,6 +1042,7 @@ CONFIG_RTC_DRV_M41T80_WDT=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set @@ -1074,6 +1121,7 @@ CONFIG_AFFS_FS=m # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1151,6 +1199,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1177,7 +1226,15 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig index dd5d6303c396..e40b1023265c 100644 --- a/arch/powerpc/configs/44x/sequoia_defconfig +++ b/arch/powerpc/configs/44x/sequoia_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:53:46 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:15:13 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -79,6 +83,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -112,13 +118,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -129,6 +144,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set CONFIG_SEQUOIA=y # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EPX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -192,7 +209,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -210,14 +226,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -226,6 +246,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -236,6 +258,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -245,17 +268,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -293,8 +312,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -344,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -356,6 +375,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -446,12 +466,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -469,12 +491,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -509,7 +534,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -519,12 +543,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -537,6 +561,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -544,6 +569,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -570,6 +596,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -608,12 +635,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -629,13 +653,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -652,16 +687,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -670,13 +703,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -691,7 +722,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -750,6 +780,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -760,14 +791,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -788,8 +817,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -800,6 +831,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -807,6 +839,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -814,9 +847,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -829,19 +865,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y @@ -866,51 +913,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig index e53c92655bd6..5075873bdb1b 100644 --- a/arch/powerpc/configs/44x/taishan_defconfig +++ b/arch/powerpc/configs/44x/taishan_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:40:44 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:17:48 2008 # # CONFIG_PPC64 is not set @@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -111,13 +117,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set CONFIG_TAISHAN=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440GX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -191,7 +208,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -209,14 +225,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -354,6 +373,8 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -444,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -467,6 +490,10 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -474,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -509,7 +535,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -519,12 +544,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -537,6 +562,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -544,6 +570,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -570,6 +597,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -608,12 +636,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -629,13 +654,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -652,16 +688,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -670,13 +704,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -691,7 +723,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -740,6 +771,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -750,14 +782,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -778,8 +808,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -789,6 +821,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -796,6 +829,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -803,9 +837,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -818,19 +855,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -842,51 +890,85 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig index 9c41f66b5a7d..663ec512b33b 100644 --- a/arch/powerpc/configs/44x/virtex5_defconfig +++ b/arch/powerpc/configs/44x/virtex5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Wed Jul 2 15:36:41 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:20:16 2008 # # CONFIG_PPC64 is not set @@ -29,9 +29,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -115,10 +117,16 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -135,6 +143,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -154,13 +163,12 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set @@ -221,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -239,6 +248,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -265,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -446,7 +452,9 @@ CONFIG_IP_NF_MANGLE=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set @@ -471,12 +479,14 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -503,7 +513,6 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -532,7 +541,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -547,6 +555,7 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -619,12 +628,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -670,39 +681,59 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_IBM_IIC is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_IBM_IIC is not set +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -711,10 +742,13 @@ CONFIG_I2C_DEBUG_ALGO=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -726,6 +760,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -799,6 +834,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set CONFIG_FB_XILINX=y # CONFIG_FB_VIRTUAL is not set @@ -831,10 +867,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -910,6 +942,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y @@ -920,17 +953,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=y @@ -994,6 +1026,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1018,7 +1051,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1071,6 +1113,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 2313c3e8ef61..d9375a969c67 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:54:43 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:23:39 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -111,13 +117,22 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,23 +158,24 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set CONFIG_WARP=y +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -191,7 +208,6 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -209,14 +225,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="ip=on" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -224,10 +244,13 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -237,17 +260,13 @@ CONFIG_ZONE_DMA=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -291,8 +310,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -318,6 +335,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_ATM is not set # CONFIG_BRIDGE is not set CONFIG_VLAN_8021Q=y +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set @@ -368,6 +386,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -446,6 +465,7 @@ CONFIG_MTD_NAND_IDS=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -460,6 +480,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -504,11 +525,11 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -538,6 +559,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -571,6 +593,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -608,44 +631,49 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_IBM_IIC is not set # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -658,6 +686,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -698,6 +727,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -709,13 +739,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -730,10 +771,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -750,11 +787,15 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -770,6 +811,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -790,6 +832,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -825,6 +868,7 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set @@ -836,19 +880,19 @@ CONFIG_MMC=m CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # # MMC/SD Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -863,7 +907,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -924,6 +967,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -934,14 +978,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1001,8 +1043,10 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1013,6 +1057,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1020,6 +1065,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1027,9 +1073,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1041,17 +1090,30 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1063,48 +1125,82 @@ CONFIG_BDI_SWITCH=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index 9d0140e3838e..6a5b713a07e0 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc9 -# Tue Apr 15 08:46:44 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 12:34:33 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -84,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -109,14 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -127,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -146,11 +160,10 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_XILINX_VIRTEX=y CONFIG_EP405=y CONFIG_KILAUEA=y CONFIG_MAKALU=y @@ -158,7 +171,6 @@ CONFIG_WALNUT=y CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y CONFIG_405GP=y CONFIG_405EX=y -CONFIG_XILINX_VIRTEX=y CONFIG_XILINX_VIRTEX_II_PRO=y CONFIG_XILINX_VIRTEX_4_FX=y CONFIG_IBM405_ERR77=y @@ -211,7 +223,9 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -219,6 +233,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -229,6 +244,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -239,6 +255,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,17 +265,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -267,6 +280,11 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -284,7 +302,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -295,9 +313,25 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -347,6 +381,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -359,6 +395,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -429,8 +466,17 @@ CONFIG_MTD_PHYSMAP_OF=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=m # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -449,12 +495,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -472,12 +520,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -512,7 +563,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -522,12 +572,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -540,6 +590,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -547,6 +598,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -573,6 +625,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -611,13 +664,76 @@ CONFIG_XILINX_HWICAP=m # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m # -# SPI support +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + # +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=m +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -633,13 +749,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -656,16 +783,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -674,14 +799,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -690,13 +812,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -715,8 +842,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=m # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -741,10 +871,27 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=m +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -755,14 +902,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -776,20 +921,64 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y @@ -802,6 +991,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -809,9 +999,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -824,17 +1017,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -846,51 +1052,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index f9d279bb700b..c7825dcbf415 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Wed Jul 9 13:50:48 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 10:01:31 2008 # # CONFIG_PPC64 is not set @@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -116,10 +118,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -136,6 +144,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -155,8 +164,6 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -231,6 +238,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -248,6 +256,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -275,10 +284,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -287,6 +292,11 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -304,7 +314,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -315,7 +325,25 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -365,6 +393,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -447,8 +477,17 @@ CONFIG_MTD_PHYSMAP_OF=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=m # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -460,6 +499,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 @@ -467,12 +507,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -480,9 +522,41 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -499,7 +573,6 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -534,7 +607,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -549,6 +621,7 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -570,11 +643,21 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -635,8 +718,77 @@ CONFIG_XILINX_HWICAP=m # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=m +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -653,6 +805,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -686,22 +839,113 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +# CONFIG_USB_OHCI_HCD_PCI is not set +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -719,8 +963,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -743,8 +992,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=m # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -780,9 +1032,16 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=m +CONFIG_UBIFS_FS_XATTR=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -793,13 +1052,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -813,7 +1071,46 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # @@ -822,13 +1119,16 @@ CONFIG_MSDOS_PARTITION=y CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=m # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y @@ -849,6 +1149,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -866,19 +1168,28 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -934,6 +1245,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -962,8 +1277,8 @@ CONFIG_CRYPTO_DES=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h index acdcdc66f1b6..3736d9b33289 100644 --- a/arch/powerpc/include/asm/kexec.h +++ b/arch/powerpc/include/asm/kexec.h @@ -22,7 +22,7 @@ #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE #endif -#define KEXEC_CONTROL_CODE_SIZE 4096 +#define KEXEC_CONTROL_PAGE_SIZE 4096 /* The native architecture */ #ifdef __powerpc64__ diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index 19c7a9403490..c2df53c5ceb9 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -278,7 +278,7 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access, unsigned long trap); extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, - unsigned long pstart, unsigned long mode, + unsigned long pstart, unsigned long prot, int psize, int ssize); extern void set_huge_psize(int psize); extern void add_gpage(unsigned long addr, unsigned long page_size, diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kernel/machine_kexec_32.c index cbaa34196797..ae63a964b858 100644 --- a/arch/powerpc/kernel/machine_kexec_32.c +++ b/arch/powerpc/kernel/machine_kexec_32.c @@ -51,7 +51,7 @@ void default_machine_kexec(struct kimage *image) relocate_new_kernel_size); flush_icache_range(reboot_code_buffer, - reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE); + reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); /* now call it */ diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 224e9a11765c..ea0c61e09b76 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -650,11 +650,18 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, } } - /* Out of paranoia, let's put the ISA hole last if any */ - if (isa_hole >= 0 && memno > 0 && isa_hole != (memno-1)) { - struct resource tmp = hose->mem_resources[isa_hole]; - hose->mem_resources[isa_hole] = hose->mem_resources[memno-1]; - hose->mem_resources[memno-1] = tmp; + /* If there's an ISA hole and the pci_mem_offset is -not- matching + * the ISA hole offset, then we need to remove the ISA hole from + * the resource list for that brige + */ + if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) { + unsigned int next = isa_hole + 1; + printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb); + if (next < memno) + memmove(&hose->mem_resources[isa_hole], + &hose->mem_resources[next], + sizeof(struct resource) * (memno - next)); + hose->mem_resources[--memno].flags = 0; } } diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index c680f1bbd387..1f8505c23548 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -792,6 +792,9 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) if (args.token == RTAS_UNKNOWN_SERVICE) return -EINVAL; + args.rets = &args.args[nargs]; + memset(args.rets, 0, args.nret * sizeof(rtas_arg_t)); + /* Need to handle ibm,suspend_me call specially */ if (args.token == ibm_suspend_me_token) { rc = rtas_ibm_suspend_me(&args); @@ -808,8 +811,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) enter_rtas(__pa(&rtas.args)); args = rtas.args; - args.rets = &args.args[nargs]; - /* A -1 return code indicates that the last command couldn't be completed due to a hardware error. */ if (args.rets[0] == -1) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 5ce5a4dcd008..14be408dfc9b 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -151,39 +151,53 @@ static struct mmu_psize_def mmu_psize_defaults_gp[] = { }, }; +static unsigned long htab_convert_pte_flags(unsigned long pteflags) +{ + unsigned long rflags = pteflags & 0x1fa; + + /* _PAGE_EXEC -> NOEXEC */ + if ((pteflags & _PAGE_EXEC) == 0) + rflags |= HPTE_R_N; + + /* PP bits. PAGE_USER is already PP bit 0x2, so we only + * need to add in 0x1 if it's a read-only user page + */ + if ((pteflags & _PAGE_USER) && !((pteflags & _PAGE_RW) && + (pteflags & _PAGE_DIRTY))) + rflags |= 1; + + /* Always add C */ + return rflags | HPTE_R_C; +} int htab_bolt_mapping(unsigned long vstart, unsigned long vend, - unsigned long pstart, unsigned long mode, + unsigned long pstart, unsigned long prot, int psize, int ssize) { unsigned long vaddr, paddr; unsigned int step, shift; - unsigned long tmp_mode; int ret = 0; shift = mmu_psize_defs[psize].shift; step = 1 << shift; + prot = htab_convert_pte_flags(prot); + + DBG("htab_bolt_mapping(%lx..%lx -> %lx (%lx,%d,%d)\n", + vstart, vend, pstart, prot, psize, ssize); + for (vaddr = vstart, paddr = pstart; vaddr < vend; vaddr += step, paddr += step) { unsigned long hash, hpteg; unsigned long vsid = get_kernel_vsid(vaddr, ssize); unsigned long va = hpt_va(vaddr, vsid, ssize); - tmp_mode = mode; - - /* Make non-kernel text non-executable */ - if (!in_kernel_text(vaddr)) - tmp_mode = mode | HPTE_R_N; - hash = hpt_hash(va, shift, ssize); hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); - DBG("htab_bolt_mapping: calling %p\n", ppc_md.hpte_insert); - BUG_ON(!ppc_md.hpte_insert); - ret = ppc_md.hpte_insert(hpteg, va, paddr, - tmp_mode, HPTE_V_BOLTED, psize, ssize); + ret = ppc_md.hpte_insert(hpteg, va, paddr, prot, + HPTE_V_BOLTED, psize, ssize); if (ret < 0) break; @@ -519,9 +533,9 @@ static unsigned long __init htab_get_table_size(void) #ifdef CONFIG_MEMORY_HOTPLUG void create_section_mapping(unsigned long start, unsigned long end) { - BUG_ON(htab_bolt_mapping(start, end, __pa(start), - _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX, - mmu_linear_psize, mmu_kernel_ssize)); + BUG_ON(htab_bolt_mapping(start, end, __pa(start), + PAGE_KERNEL, mmu_linear_psize, + mmu_kernel_ssize)); } int remove_section_mapping(unsigned long start, unsigned long end) @@ -570,7 +584,7 @@ void __init htab_initialize(void) { unsigned long table; unsigned long pteg_count; - unsigned long mode_rw; + unsigned long prot, tprot; unsigned long base = 0, size = 0, limit; int i; @@ -628,7 +642,7 @@ void __init htab_initialize(void) mtspr(SPRN_SDR1, _SDR1); } - mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX; + prot = PAGE_KERNEL; #ifdef CONFIG_DEBUG_PAGEALLOC linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT; @@ -646,8 +660,10 @@ void __init htab_initialize(void) for (i=0; i < lmb.memory.cnt; i++) { base = (unsigned long)__va(lmb.memory.region[i].base); size = lmb.memory.region[i].size; + tprot = prot | (in_kernel_text(base) ? _PAGE_EXEC : 0); - DBG("creating mapping for region: %lx : %lx\n", base, size); + DBG("creating mapping for region: %lx..%lx (prot: %x)\n", + base, size, tprot); #ifdef CONFIG_U3_DART /* Do not map the DART space. Fortunately, it will be aligned @@ -664,21 +680,21 @@ void __init htab_initialize(void) unsigned long dart_table_end = dart_tablebase + 16 * MB; if (base != dart_tablebase) BUG_ON(htab_bolt_mapping(base, dart_tablebase, - __pa(base), mode_rw, + __pa(base), tprot, mmu_linear_psize, mmu_kernel_ssize)); if ((base + size) > dart_table_end) BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB, base + size, __pa(dart_table_end), - mode_rw, + tprot, mmu_linear_psize, mmu_kernel_ssize)); continue; } #endif /* CONFIG_U3_DART */ BUG_ON(htab_bolt_mapping(base, base + size, __pa(base), - mode_rw, mmu_linear_psize, mmu_kernel_ssize)); + tprot, mmu_linear_psize, mmu_kernel_ssize)); } /* @@ -696,7 +712,7 @@ void __init htab_initialize(void) tce_alloc_start = base + size + 1; BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end, - __pa(tce_alloc_start), mode_rw, + __pa(tce_alloc_start), prot, mmu_linear_psize, mmu_kernel_ssize)); } @@ -1117,8 +1133,7 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi) unsigned long hash, hpteg; unsigned long vsid = get_kernel_vsid(vaddr, mmu_kernel_ssize); unsigned long va = hpt_va(vaddr, vsid, mmu_kernel_ssize); - unsigned long mode = _PAGE_ACCESSED | _PAGE_DIRTY | - _PAGE_COHERENT | PP_RWXX | HPTE_R_N; + unsigned long mode = htab_convert_pte_flags(PAGE_KERNEL); int ret; hash = hpt_hash(va, PAGE_SHIFT, mmu_kernel_ssize); diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 4f7df85129d8..036fe2f10c77 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -206,13 +206,10 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size) int __meminit vmemmap_populate(struct page *start_page, unsigned long nr_pages, int node) { - unsigned long mode_rw; unsigned long start = (unsigned long)start_page; unsigned long end = (unsigned long)(start_page + nr_pages); unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift; - mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX; - /* Align to the page size of the linear mapping. */ start = _ALIGN_DOWN(start, page_size); @@ -230,9 +227,9 @@ int __meminit vmemmap_populate(struct page *start_page, pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n", start, p, __pa(p)); - mapped = htab_bolt_mapping(start, start + page_size, - __pa(p), mode_rw, mmu_vmemmap_psize, - mmu_kernel_ssize); + mapped = htab_bolt_mapping(start, start + page_size, __pa(p), + PAGE_KERNEL, mmu_vmemmap_psize, + mmu_kernel_ssize); BUG_ON(mapped < 0); } diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c index e55746b824b4..89ecd76127d8 100644 --- a/arch/powerpc/platforms/44x/warp-nand.c +++ b/arch/powerpc/platforms/44x/warp-nand.c @@ -24,7 +24,7 @@ static struct resource warp_ndfc = { .start = WARP_NAND_FLASH_REG_ADDR, - .end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE, + .end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1, .flags = IORESOURCE_MEM, }; diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 9565995cba7f..960edf89be51 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -30,18 +30,6 @@ static __initdata struct of_device_id warp_of_bus[] = { {}, }; -static __initdata struct i2c_board_info warp_i2c_info[] = { - { I2C_BOARD_INFO("ad7414", 0x4a) } -}; - -static int __init warp_arch_init(void) -{ - /* This should go away once support is moved to the dts. */ - i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info)); - return 0; -} -machine_arch_initcall(warp, warp_arch_init); - static int __init warp_device_probe(void) { of_platform_bus_probe(NULL, warp_of_bus, NULL); @@ -223,7 +211,7 @@ static void pika_setup_critical_temp(struct i2c_client *client) /* These registers are in 1 degree increments. */ i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */ - i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */ + i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */ np = of_find_compatible_node(NULL, NULL, "adi,ad7414"); if (np == NULL) { @@ -289,8 +277,15 @@ found_it: printk(KERN_INFO "PIKA DTM thread running.\n"); while (!kthread_should_stop()) { - u16 temp = swab16(i2c_smbus_read_word_data(client, 0)); - out_be32(fpga + 0x20, temp); + int val; + + val = i2c_smbus_read_word_data(client, 0); + if (val < 0) + dev_dbg(&client->dev, "DTM read temp failed.\n"); + else { + s16 temp = swab16(val); + out_be32(fpga + 0x20, temp); + } pika_dtm_check_fan(fpga); diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h index f219c6411e0b..bb729b84a21e 100644 --- a/arch/s390/include/asm/kexec.h +++ b/arch/s390/include/asm/kexec.h @@ -31,7 +31,7 @@ #define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31) /* Allocate one page for the pdp and the second for the code */ -#define KEXEC_CONTROL_CODE_SIZE 4096 +#define KEXEC_CONTROL_PAGE_SIZE 4096 /* The native architecture */ #define KEXEC_ARCH KEXEC_ARCH_S390 diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h index 00f4260ef09b..765a5e1660fc 100644 --- a/arch/sh/include/asm/kexec.h +++ b/arch/sh/include/asm/kexec.h @@ -21,7 +21,7 @@ /* Maximum address we can use for the control code buffer */ #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE -#define KEXEC_CONTROL_CODE_SIZE 4096 +#define KEXEC_CONTROL_PAGE_SIZE 4096 /* The native architecture */ #define KEXEC_ARCH KEXEC_ARCH_SH diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h index 3473e25231d9..e3dd9303643d 100644 --- a/arch/sparc/include/asm/irq_64.h +++ b/arch/sparc/include/asm/irq_64.h @@ -93,4 +93,8 @@ static inline unsigned long get_softint(void) void __trigger_all_cpu_backtrace(void); #define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace() +extern void *hardirq_stack[NR_CPUS]; +extern void *softirq_stack[NR_CPUS]; +#define __ARCH_HAS_DO_SOFTIRQ + #endif diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h index e5f5aedc2293..bba777a416d3 100644 --- a/arch/sparc/include/asm/of_device.h +++ b/arch/sparc/include/asm/of_device.h @@ -30,8 +30,7 @@ struct of_device extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name); extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size); -/* These are just here during the transition */ -#include <linux/of_device.h> +/* This is just here during the transition */ #include <linux/of_platform.h> #endif /* __KERNEL__ */ diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index ba43d85e8dde..9b6689d9d570 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -682,10 +682,32 @@ void ack_bad_irq(unsigned int virt_irq) ino, virt_irq); } +void *hardirq_stack[NR_CPUS]; +void *softirq_stack[NR_CPUS]; + +static __attribute__((always_inline)) void *set_hardirq_stack(void) +{ + void *orig_sp, *sp = hardirq_stack[smp_processor_id()]; + + __asm__ __volatile__("mov %%sp, %0" : "=r" (orig_sp)); + if (orig_sp < sp || + orig_sp > (sp + THREAD_SIZE)) { + sp += THREAD_SIZE - 192 - STACK_BIAS; + __asm__ __volatile__("mov %0, %%sp" : : "r" (sp)); + } + + return orig_sp; +} +static __attribute__((always_inline)) void restore_hardirq_stack(void *orig_sp) +{ + __asm__ __volatile__("mov %0, %%sp" : : "r" (orig_sp)); +} + void handler_irq(int irq, struct pt_regs *regs) { unsigned long pstate, bucket_pa; struct pt_regs *old_regs; + void *orig_sp; clear_softint(1 << irq); @@ -703,6 +725,8 @@ void handler_irq(int irq, struct pt_regs *regs) "i" (PSTATE_IE) : "memory"); + orig_sp = set_hardirq_stack(); + while (bucket_pa) { struct irq_desc *desc; unsigned long next_pa; @@ -719,10 +743,38 @@ void handler_irq(int irq, struct pt_regs *regs) bucket_pa = next_pa; } + restore_hardirq_stack(orig_sp); + irq_exit(); set_irq_regs(old_regs); } +void do_softirq(void) +{ + unsigned long flags; + + if (in_interrupt()) + return; + + local_irq_save(flags); + + if (local_softirq_pending()) { + void *orig_sp, *sp = softirq_stack[smp_processor_id()]; + + sp += THREAD_SIZE - 192 - STACK_BIAS; + + __asm__ __volatile__("mov %%sp, %0\n\t" + "mov %1, %%sp" + : "=&r" (orig_sp) + : "r" (sp)); + __do_softirq(); + __asm__ __volatile__("mov %0, %%sp" + : : "r" (orig_sp)); + } + + local_irq_restore(flags); +} + #ifdef CONFIG_HOTPLUG_CPU void fixup_irqs(void) { diff --git a/arch/sparc64/kernel/kstack.h b/arch/sparc64/kernel/kstack.h new file mode 100644 index 000000000000..4248d969272f --- /dev/null +++ b/arch/sparc64/kernel/kstack.h @@ -0,0 +1,60 @@ +#ifndef _KSTACK_H +#define _KSTACK_H + +#include <linux/thread_info.h> +#include <linux/sched.h> +#include <asm/ptrace.h> +#include <asm/irq.h> + +/* SP must be STACK_BIAS adjusted already. */ +static inline bool kstack_valid(struct thread_info *tp, unsigned long sp) +{ + unsigned long base = (unsigned long) tp; + + if (sp >= (base + sizeof(struct thread_info)) && + sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf))) + return true; + + if (hardirq_stack[tp->cpu]) { + base = (unsigned long) hardirq_stack[tp->cpu]; + if (sp >= base && + sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf))) + return true; + base = (unsigned long) softirq_stack[tp->cpu]; + if (sp >= base && + sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf))) + return true; + } + return false; +} + +/* Does "regs" point to a valid pt_regs trap frame? */ +static inline bool kstack_is_trap_frame(struct thread_info *tp, struct pt_regs *regs) +{ + unsigned long base = (unsigned long) tp; + unsigned long addr = (unsigned long) regs; + + if (addr >= base && + addr <= (base + THREAD_SIZE - sizeof(*regs))) + goto check_magic; + + if (hardirq_stack[tp->cpu]) { + base = (unsigned long) hardirq_stack[tp->cpu]; + if (addr >= base && + addr <= (base + THREAD_SIZE - sizeof(*regs))) + goto check_magic; + base = (unsigned long) softirq_stack[tp->cpu]; + if (addr >= base && + addr <= (base + THREAD_SIZE - sizeof(*regs))) + goto check_magic; + } + return false; + +check_magic: + if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) + return true; + return false; + +} + +#endif /* _KSTACK_H */ diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 7f5debdc5fed..15f4178592e7 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -52,6 +52,8 @@ #include <asm/irq_regs.h> #include <asm/smp.h> +#include "kstack.h" + static void sparc64_yield(int cpu) { if (tlb_type != hypervisor) @@ -235,19 +237,6 @@ void show_regs(struct pt_regs *regs) struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; static DEFINE_SPINLOCK(global_reg_snapshot_lock); -static bool kstack_valid(struct thread_info *tp, struct reg_window *rw) -{ - unsigned long thread_base, fp; - - thread_base = (unsigned long) tp; - fp = (unsigned long) rw; - - if (fp < (thread_base + sizeof(struct thread_info)) || - fp >= (thread_base + THREAD_SIZE)) - return false; - return true; -} - static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs, int this_cpu) { @@ -264,11 +253,11 @@ static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs, rw = (struct reg_window *) (regs->u_regs[UREG_FP] + STACK_BIAS); - if (kstack_valid(tp, rw)) { + if (kstack_valid(tp, (unsigned long) rw)) { global_reg_snapshot[this_cpu].i7 = rw->ins[7]; rw = (struct reg_window *) (rw->ins[6] + STACK_BIAS); - if (kstack_valid(tp, rw)) + if (kstack_valid(tp, (unsigned long) rw)) global_reg_snapshot[this_cpu].rpc = rw->ins[7]; } } else { @@ -828,7 +817,7 @@ out: unsigned long get_wchan(struct task_struct *task) { unsigned long pc, fp, bias = 0; - unsigned long thread_info_base; + struct thread_info *tp; struct reg_window *rw; unsigned long ret = 0; int count = 0; @@ -837,14 +826,12 @@ unsigned long get_wchan(struct task_struct *task) task->state == TASK_RUNNING) goto out; - thread_info_base = (unsigned long) task_stack_page(task); + tp = task_thread_info(task); bias = STACK_BIAS; fp = task_thread_info(task)->ksp + bias; do { - /* Bogus frame pointer? */ - if (fp < (thread_info_base + sizeof(struct thread_info)) || - fp >= (thread_info_base + THREAD_SIZE)) + if (!kstack_valid(tp, fp)) break; rw = (struct reg_window *) fp; pc = rw->ins[7]; diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 27b81775a4de..743ccad61c60 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -858,9 +858,7 @@ void smp_tsb_sync(struct mm_struct *mm) extern unsigned long xcall_flush_tlb_mm; extern unsigned long xcall_flush_tlb_pending; extern unsigned long xcall_flush_tlb_kernel_range; -#ifdef CONFIG_MAGIC_SYSRQ extern unsigned long xcall_fetch_glob_regs; -#endif extern unsigned long xcall_receive_signal; extern unsigned long xcall_new_mmu_context_version; #ifdef CONFIG_KGDB @@ -1005,12 +1003,10 @@ void kgdb_roundup_cpus(unsigned long flags) } #endif -#ifdef CONFIG_MAGIC_SYSRQ void smp_fetch_global_regs(void) { smp_cross_call(&xcall_fetch_glob_regs, 0, 0, 0); } -#endif /* We know that the window frames of the user have been flushed * to the stack before we get here because all callers of us diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c index e9d7f0660f2e..4e21d4a57d3b 100644 --- a/arch/sparc64/kernel/stacktrace.c +++ b/arch/sparc64/kernel/stacktrace.c @@ -5,10 +5,12 @@ #include <asm/ptrace.h> #include <asm/stacktrace.h> +#include "kstack.h" + void save_stack_trace(struct stack_trace *trace) { - unsigned long ksp, fp, thread_base; struct thread_info *tp = task_thread_info(current); + unsigned long ksp, fp; stack_trace_flush(); @@ -18,23 +20,18 @@ void save_stack_trace(struct stack_trace *trace) ); fp = ksp + STACK_BIAS; - thread_base = (unsigned long) tp; do { struct sparc_stackf *sf; struct pt_regs *regs; unsigned long pc; - /* Bogus frame pointer? */ - if (fp < (thread_base + sizeof(struct thread_info)) || - fp > (thread_base + THREAD_SIZE - sizeof(struct sparc_stackf))) + if (!kstack_valid(tp, fp)) break; sf = (struct sparc_stackf *) fp; regs = (struct pt_regs *) (sf + 1); - if (((unsigned long)regs <= - (thread_base + THREAD_SIZE - sizeof(*regs))) && - (regs->magic & ~0x1ff) == PT_REGS_MAGIC) { + if (kstack_is_trap_frame(tp, regs)) { if (!(regs->tstate & TSTATE_PRIV)) break; pc = regs->tpc; diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 404e8561e2d0..3d924121c796 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -39,6 +39,7 @@ #include <asm/prom.h> #include "entry.h" +#include "kstack.h" /* When an irrecoverable trap occurs at tl > 0, the trap entry * code logs the trap state registers at every level in the trap @@ -2115,14 +2116,12 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp) struct pt_regs *regs; unsigned long pc; - /* Bogus frame pointer? */ - if (fp < (thread_base + sizeof(struct thread_info)) || - fp >= (thread_base + THREAD_SIZE)) + if (!kstack_valid(tp, fp)) break; sf = (struct sparc_stackf *) fp; regs = (struct pt_regs *) (sf + 1); - if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) { + if (kstack_is_trap_frame(tp, regs)) { if (!(regs->tstate & TSTATE_PRIV)) break; pc = regs->tpc; diff --git a/arch/sparc64/lib/mcount.S b/arch/sparc64/lib/mcount.S index 7735a7a60533..fad90ddb3a28 100644 --- a/arch/sparc64/lib/mcount.S +++ b/arch/sparc64/lib/mcount.S @@ -48,12 +48,45 @@ mcount: sub %g3, STACK_BIAS, %g3 cmp %sp, %g3 bg,pt %xcc, 1f - sethi %hi(panicstring), %g3 + nop + lduh [%g6 + TI_CPU], %g1 + sethi %hi(hardirq_stack), %g3 + or %g3, %lo(hardirq_stack), %g3 + sllx %g1, 3, %g1 + ldx [%g3 + %g1], %g7 + sub %g7, STACK_BIAS, %g7 + cmp %sp, %g7 + bleu,pt %xcc, 2f + sethi %hi(THREAD_SIZE), %g3 + add %g7, %g3, %g7 + cmp %sp, %g7 + blu,pn %xcc, 1f +2: sethi %hi(softirq_stack), %g3 + or %g3, %lo(softirq_stack), %g3 + ldx [%g3 + %g1], %g7 + cmp %sp, %g7 + bleu,pt %xcc, 2f + sethi %hi(THREAD_SIZE), %g3 + add %g7, %g3, %g7 + cmp %sp, %g7 + blu,pn %xcc, 1f + nop + /* If we are already on ovstack, don't hop onto it + * again, we are already trying to output the stack overflow + * message. + */ sethi %hi(ovstack), %g7 ! cant move to panic stack fast enough or %g7, %lo(ovstack), %g7 - add %g7, OVSTACKSIZE, %g7 + add %g7, OVSTACKSIZE, %g3 + sub %g3, STACK_BIAS + 192, %g3 sub %g7, STACK_BIAS, %g7 - mov %g7, %sp + cmp %sp, %g7 + blu,pn %xcc, 2f + cmp %sp, %g3 + bleu,pn %xcc, 1f + nop +2: mov %g3, %sp + sethi %hi(panicstring), %g3 call prom_printf or %g3, %lo(panicstring), %o0 call prom_halt diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 4e821b3ecb03..217de3ea29e8 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -49,6 +49,7 @@ #include <asm/sstate.h> #include <asm/mdesc.h> #include <asm/cpudata.h> +#include <asm/irq.h> #define MAX_PHYS_ADDRESS (1UL << 42UL) #define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL) @@ -1771,6 +1772,16 @@ void __init paging_init(void) if (tlb_type == hypervisor) sun4v_mdesc_init(); + /* Once the OF device tree and MDESC have been setup, we know + * the list of possible cpus. Therefore we can allocate the + * IRQ stacks. + */ + for_each_possible_cpu(i) { + /* XXX Use node local allocations... XXX */ + softirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + hardirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + } + /* Setup bootmem... */ last_valid_pfn = end_pfn = bootmem_init(phys_base); diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index ff1dc44d363e..86773e89dc1b 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -480,7 +480,6 @@ xcall_sync_tick: b rtrap_xcall ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1 -#ifdef CONFIG_MAGIC_SYSRQ .globl xcall_fetch_glob_regs xcall_fetch_glob_regs: sethi %hi(global_reg_snapshot), %g1 @@ -511,7 +510,6 @@ xcall_fetch_glob_regs: membar #StoreStore stx %g3, [%g1 + GR_SNAP_THREAD] retry -#endif /* CONFIG_MAGIC_SYSRQ */ #ifdef DCACHE_ALIASING_POSSIBLE .align 32 diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 3d0f2b6a5a16..ac2fb0641a04 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -22,7 +22,6 @@ config X86 select HAVE_IDE select HAVE_OPROFILE select HAVE_IOREMAP_PROT - select HAVE_GET_USER_PAGES_FAST select HAVE_KPROBES select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_KRETPROBES diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index d6c898358371..039a8d4aaf62 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1720,15 +1720,19 @@ static int __init parse_lapic_timer_c2_ok(char *arg) } early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); -static int __init apic_set_verbosity(char *str) +static int __init apic_set_verbosity(char *arg) { - if (strcmp("debug", str) == 0) + if (!arg) + return -EINVAL; + + if (strcmp(arg, "debug") == 0) apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) + else if (strcmp(arg, "verbose") == 0) apic_verbosity = APIC_VERBOSE; - return 1; + + return 0; } -__setup("apic=", apic_set_verbosity); +early_param("apic", apic_set_verbosity); static int __init lapic_insert_resource(void) { diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index c9b58a806e85..c8e315f1aa83 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -50,6 +50,8 @@ static double __initdata y = 3145727.0; */ static void __init check_fpu(void) { + s32 fdiv_bug; + if (!boot_cpu_data.hard_math) { #ifndef CONFIG_MATH_EMULATION printk(KERN_EMERG "No coprocessor found and no math emulation present.\n"); @@ -74,8 +76,10 @@ static void __init check_fpu(void) "fistpl %0\n\t" "fwait\n\t" "fninit" - : "=m" (*&boot_cpu_data.fdiv_bug) + : "=m" (*&fdiv_bug) : "m" (*&x), "m" (*&y)); + + boot_cpu_data.fdiv_bug = fdiv_bug; if (boot_cpu_data.fdiv_bug) printk("Hmm, FPU with FDIV bug.\n"); } diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index de9aa0e3a9c5..09cddb57bec4 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -57,7 +57,7 @@ atomic_t irq_mis_count; static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); -static DEFINE_SPINLOCK(vector_lock); +DEFINE_SPINLOCK(vector_lock); int timer_through_8259 __initdata; @@ -1209,10 +1209,6 @@ static int assign_irq_vector(int irq) return vector; } -void setup_vector_irq(int cpu) -{ -} - static struct irq_chip ioapic_chip; #define IOAPIC_AUTO -1 diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 8269434d1707..61a83b70c18f 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -101,7 +101,7 @@ int timer_through_8259 __initdata; static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); -DEFINE_SPINLOCK(vector_lock); +static DEFINE_SPINLOCK(vector_lock); /* * # of IRQ routing registers @@ -697,6 +697,19 @@ static int pin_2_irq(int idx, int apic, int pin) return irq; } +void lock_vector_lock(void) +{ + /* Used to the online set of cpus does not change + * during assign_irq_vector. + */ + spin_lock(&vector_lock); +} + +void unlock_vector_lock(void) +{ + spin_unlock(&vector_lock); +} + static int __assign_irq_vector(int irq, cpumask_t mask) { /* @@ -802,7 +815,7 @@ static void __clear_irq_vector(int irq) cpus_clear(cfg->domain); } -static void __setup_vector_irq(int cpu) +void __setup_vector_irq(int cpu) { /* Initialize vector_irq on a new cpu */ /* This function must be called with vector_lock held */ @@ -825,14 +838,6 @@ static void __setup_vector_irq(int cpu) } } -void setup_vector_irq(int cpu) -{ - spin_lock(&vector_lock); - __setup_vector_irq(smp_processor_id()); - spin_unlock(&vector_lock); -} - - static struct irq_chip ioapic_chip; static void ioapic_register_intr(int irq, unsigned long trigger) diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index 9fe478d98406..0732adba05ca 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/numa.h> #include <linux/ftrace.h> +#include <linux/suspend.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -78,7 +79,7 @@ static void load_segments(void) /* * A architecture hook called to validate the * proposed image and prepare the control pages - * as needed. The pages for KEXEC_CONTROL_CODE_SIZE + * as needed. The pages for KEXEC_CONTROL_PAGE_SIZE * have been allocated, but the segments have yet * been copied into the kernel. * @@ -113,6 +114,7 @@ void machine_kexec(struct kimage *image) { unsigned long page_list[PAGES_NR]; void *control_page; + int save_ftrace_enabled; asmlinkage unsigned long (*relocate_kernel_ptr)(unsigned long indirection_page, unsigned long control_page, @@ -120,7 +122,12 @@ void machine_kexec(struct kimage *image) unsigned int has_pae, unsigned int preserve_context); - tracer_disable(); +#ifdef CONFIG_KEXEC_JUMP + if (kexec_image->preserve_context) + save_processor_state(); +#endif + + save_ftrace_enabled = __ftrace_enabled_save(); /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); @@ -138,7 +145,7 @@ void machine_kexec(struct kimage *image) } control_page = page_address(image->control_code_page); - memcpy(control_page, relocate_kernel, PAGE_SIZE/2); + memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE); relocate_kernel_ptr = control_page; page_list[PA_CONTROL_PAGE] = __pa(control_page); @@ -178,6 +185,13 @@ void machine_kexec(struct kimage *image) (unsigned long)page_list, image->start, cpu_has_pae, image->preserve_context); + +#ifdef CONFIG_KEXEC_JUMP + if (kexec_image->preserve_context) + restore_processor_state(); +#endif + + __ftrace_enabled_restore(save_ftrace_enabled); } void arch_crash_save_vmcoreinfo(void) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 6ae005ccaed8..678090508a62 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -83,7 +83,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m) if (x86_quirks->mpc_oem_bus_info) x86_quirks->mpc_oem_bus_info(m, str); else - printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str); + apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->mpc_busid, str); #if MAX_MP_BUSSES < 256 if (m->mpc_busid >= MAX_MP_BUSSES) { @@ -154,7 +154,7 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) static void print_MP_intsrc_info(struct mpc_config_intsrc *m) { - printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x," + apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, @@ -163,7 +163,7 @@ static void print_MP_intsrc_info(struct mpc_config_intsrc *m) static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq) { - printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x," + apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", mp_irq->mp_irqtype, mp_irq->mp_irqflag & 3, (mp_irq->mp_irqflag >> 2) & 3, mp_irq->mp_srcbus, @@ -235,7 +235,7 @@ static void __init MP_intsrc_info(struct mpc_config_intsrc *m) static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m) { - printk(KERN_INFO "Lint: type %d, pol %d, trig %d, bus %02x," + apic_printk(APIC_VERBOSE, "Lint: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC LINT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid, @@ -695,7 +695,8 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, unsigned int *bp = phys_to_virt(base); struct intel_mp_floating *mpf; - printk(KERN_DEBUG "Scan SMP from %p for %ld bytes.\n", bp, length); + apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n", + bp, length); BUILD_BUG_ON(sizeof(*mpf) != 16); while (length > 0) { diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index b67a4b1d4eae..02d19328525d 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -1350,7 +1350,7 @@ static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl) * Function for kdump case. Get the tce tables from first kernel * by reading the contents of the base adress register of calgary iommu */ -static void get_tce_space_from_tar() +static void get_tce_space_from_tar(void) { int bus; void __iomem *target; diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S index 703310a99023..6f50664b2ba5 100644 --- a/arch/x86/kernel/relocate_kernel_32.S +++ b/arch/x86/kernel/relocate_kernel_32.S @@ -20,10 +20,11 @@ #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) #define PAE_PGD_ATTR (_PAGE_PRESENT) -/* control_page + PAGE_SIZE/2 ~ control_page + PAGE_SIZE * 3/4 are - * used to save some data for jumping back +/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE + * ~ control_page + PAGE_SIZE are used as data storage and stack for + * jumping back */ -#define DATA(offset) (PAGE_SIZE/2+(offset)) +#define DATA(offset) (KEXEC_CONTROL_CODE_MAX_SIZE+(offset)) /* Minimal CPU state */ #define ESP DATA(0x0) @@ -376,3 +377,6 @@ swap_pages: popl %ebx popl %ebp ret + + .globl kexec_control_code_size +.set kexec_control_code_size, . - relocate_kernel diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 2d888586385d..68b48e3fbcbd 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -604,6 +604,14 @@ void __init setup_arch(char **cmdline_p) early_cpu_init(); early_ioremap_init(); +#if defined(CONFIG_VMI) && defined(CONFIG_X86_32) + /* + * Must be before kernel pagetables are setup + * or fixmap area is touched. + */ + vmi_init(); +#endif + ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev); screen_info = boot_params.screen_info; edid_info = boot_params.edid_info; @@ -817,14 +825,6 @@ void __init setup_arch(char **cmdline_p) kvmclock_init(); #endif -#if defined(CONFIG_VMI) && defined(CONFIG_X86_32) - /* - * Must be after max_low_pfn is determined, and before kernel - * pagetables are setup. - */ - vmi_init(); -#endif - paravirt_pagetable_setup_start(swapper_pg_dir); paging_init(); paravirt_pagetable_setup_done(swapper_pg_dir); @@ -861,12 +861,6 @@ void __init setup_arch(char **cmdline_p) init_apic_mappings(); ioapic_init_mappings(); -#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC) && defined(CONFIG_X86_32) - if (def_to_bigsmp) - printk(KERN_WARNING "More than 8 CPUs detected and " - "CONFIG_X86_PC cannot handle it.\nUse " - "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n"); -#endif kvm_guest_init(); e820_reserve_resources(); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 332512767f4f..91055d7fc1b0 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -326,12 +326,16 @@ static void __cpuinit start_secondary(void *unused) * for which cpus receive the IPI. Holding this * lock helps us to not include this cpu in a currently in progress * smp_call_function(). + * + * We need to hold vector_lock so there the set of online cpus + * does not change while we are assigning vectors to cpus. Holding + * this lock ensures we don't half assign or remove an irq from a cpu. */ ipi_call_lock_irq(); -#ifdef CONFIG_X86_IO_APIC - setup_vector_irq(smp_processor_id()); -#endif + lock_vector_lock(); + __setup_vector_irq(smp_processor_id()); cpu_set(smp_processor_id(), cpu_online_map); + unlock_vector_lock(); ipi_call_unlock_irq(); per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; @@ -990,7 +994,17 @@ int __cpuinit native_cpu_up(unsigned int cpu) flush_tlb_all(); low_mappings = 1; +#ifdef CONFIG_X86_PC + if (def_to_bigsmp && apicid > 8) { + printk(KERN_WARNING + "More than 8 CPUs detected - skipping them.\n" + "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n"); + err = -1; + } else + err = do_boot_cpu(apicid, cpu); +#else err = do_boot_cpu(apicid, cpu); +#endif zap_low_mappings(); low_mappings = 0; @@ -1336,7 +1350,9 @@ int __cpu_disable(void) remove_siblinginfo(cpu); /* It's now safe to remove this processor from the online map */ + lock_vector_lock(); remove_cpu_from_maps(cpu); + unlock_vector_lock(); fixup_irqs(cpu_online_map); return 0; } diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 0a1b1a9d922d..6ca515d6db54 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -37,6 +37,7 @@ #include <asm/timer.h> #include <asm/vmi_time.h> #include <asm/kmap_types.h> +#include <asm/setup.h> /* Convenient for calling VMI functions indirectly in the ROM */ typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void); @@ -683,7 +684,7 @@ void vmi_bringup(void) { /* We must establish the lowmem mapping for MMU ops to work */ if (vmi_ops.set_linear_mapping) - vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, max_low_pfn, 0); + vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, MAXMEM_PFN, 0); } /* diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index cdb2363697d2..af5bdad84604 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -209,3 +209,11 @@ SECTIONS DWARF_DEBUG } + +#ifdef CONFIG_KEXEC +/* Link time checks */ +#include <asm/kexec.h> + +ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, + "kexec control code size is too big") +#endif diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index 2977ea37791f..dfb932dcf136 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -1,7 +1,6 @@ obj-y := init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \ - pat.o pgtable.o + pat.o pgtable.o gup.o -obj-$(CONFIG_HAVE_GET_USER_PAGES_FAST) += gup.o obj-$(CONFIG_X86_32) += pgtable_32.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 016f335bbeea..6ba6f889c79d 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -170,7 +170,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, phys_addr &= PAGE_MASK; size = PAGE_ALIGN(last_addr+1) - phys_addr; - retval = reserve_memtype(phys_addr, phys_addr + size, + retval = reserve_memtype(phys_addr, (u64)phys_addr + size, prot_val, &new_prot_val); if (retval) { pr_debug("Warning: reserve_memtype returned %d\n", retval); diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 557b2abceef8..d50302774fe2 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -207,6 +207,9 @@ static void pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmds[]) unsigned long addr; int i; + if (PREALLOCATED_PMDS == 0) /* Work around gcc-3.4.x bug */ + return; + pud = pud_offset(pgd, 0); for (addr = i = 0; i < PREALLOCATED_PMDS; |