summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi2
-rw-r--r--arch/arm/configs/sama5_defconfig2
-rw-r--r--arch/arm/configs/socfpga_defconfig3
-rw-r--r--arch/arm/mach-at91/Kconfig3
-rw-r--r--arch/arm/mach-at91/at91sam9.c18
-rw-r--r--arch/arm/mach-at91/generic.h2
-rw-r--r--arch/arm/mach-at91/pm.c193
-rw-r--r--arch/arm/mach-at91/pm_suspend.S111
-rw-r--r--arch/arm/mach-ixp4xx/common.c1
-rw-r--r--arch/arm/mach-mvebu/board-v7.c1
-rw-r--r--arch/arm/mach-mvebu/coherency_ll.S2
-rw-r--r--arch/arm/mach-mvebu/kirkwood.c2
-rw-r--r--arch/arm/mach-mvebu/pm-board.c11
-rw-r--r--arch/arm/mach-mvebu/pmsu_ll.S3
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c2
-rw-r--r--arch/arm64/Kconfig.platforms1
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts4
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186.dtsi7
-rw-r--r--arch/arm64/boot/dts/sprd/whale2.dtsi16
19 files changed, 267 insertions, 117 deletions
diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
index 4990ed90dcea..3e39b9a1f35d 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
@@ -153,7 +153,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
- cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */
+ cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* gpio_110 */
vmmc-supply = <&vmmc1>;
bus-width = <4>;
cap-power-off-card;
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 515cb37eeab6..d5341b0bd88d 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -150,7 +150,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
CONFIG_VIDEO_ATMEL_ISI=y
-CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_SOC_CAMERA_OV2640=m
CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=y
CONFIG_DRM_PANEL_SIMPLE=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 9d42cfe85f5b..6701a975e785 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -21,7 +21,6 @@ CONFIG_NEON=y
CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y
CONFIG_PACKET=y
@@ -128,6 +127,8 @@ CONFIG_RTC_DRV_DS1307=y
CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y
CONFIG_DMATEST=m
+CONFIG_IIO=y
+CONFIG_LTC2497=y
CONFIG_FPGA=y
CONFIG_FPGA_MGR_SOCFPGA=y
CONFIG_FPGA_MGR_SOCFPGA_A10=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 903f23c309df..01b1bdb4fb6e 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -21,7 +21,6 @@ config SOC_SAMA5D2
depends on ARCH_MULTI_V7
select SOC_SAMA5
select CACHE_L2X0
- select HAVE_FB_ATMEL
select HAVE_AT91_UTMI
select HAVE_AT91_USB_CLK
select HAVE_AT91_H32MX
@@ -36,7 +35,6 @@ config SOC_SAMA5D3
bool "SAMA5D3 family"
depends on ARCH_MULTI_V7
select SOC_SAMA5
- select HAVE_FB_ATMEL
select HAVE_AT91_UTMI
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
@@ -50,7 +48,6 @@ config SOC_SAMA5D4
depends on ARCH_MULTI_V7
select SOC_SAMA5
select CACHE_L2X0
- select HAVE_FB_ATMEL
select HAVE_AT91_UTMI
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index 3dbdef4d3cbf..c12563b09656 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -32,3 +32,21 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
.init_machine = at91sam9_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
+
+static void __init sam9x60_init(void)
+{
+ of_platform_default_populate(NULL, NULL, NULL);
+
+ sam9x60_pm_init();
+}
+
+static const char *const sam9x60_dt_board_compat[] __initconst = {
+ "microchip,sam9x60",
+ NULL
+};
+
+DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
+ /* Maintainer: Microchip */
+ .init_machine = sam9x60_init,
+ .dt_compat = sam9x60_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index e2bd17237964..72b45accfa0f 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -14,11 +14,13 @@
#ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void);
extern void __init at91sam9_pm_init(void);
+extern void __init sam9x60_pm_init(void);
extern void __init sama5_pm_init(void);
extern void __init sama5d2_pm_init(void);
#else
static inline void __init at91rm9200_pm_init(void) { }
static inline void __init at91sam9_pm_init(void) { }
+static inline void __init sam9x60_pm_init(void) { }
static inline void __init sama5_pm_init(void) { }
static inline void __init sama5d2_pm_init(void) { }
#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 2a757dcaa1a5..6c8147536f3d 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -39,6 +39,20 @@ extern void at91_pinctrl_gpio_suspend(void);
extern void at91_pinctrl_gpio_resume(void);
#endif
+struct at91_soc_pm {
+ int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
+ int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
+ const struct of_device_id *ws_ids;
+ struct at91_pm_data data;
+};
+
+static struct at91_soc_pm soc_pm = {
+ .data = {
+ .standby_mode = AT91_PM_STANDBY,
+ .suspend_mode = AT91_PM_ULP0,
+ },
+};
+
static const match_table_t pm_modes __initconst = {
{ AT91_PM_STANDBY, "standby" },
{ AT91_PM_ULP0, "ulp0" },
@@ -47,16 +61,11 @@ static const match_table_t pm_modes __initconst = {
{ -1, NULL },
};
-static struct at91_pm_data pm_data = {
- .standby_mode = AT91_PM_STANDBY,
- .suspend_mode = AT91_PM_ULP0,
-};
-
#define at91_ramc_read(id, field) \
- __raw_readl(pm_data.ramc[id] + field)
+ __raw_readl(soc_pm.data.ramc[id] + field)
#define at91_ramc_write(id, field, value) \
- __raw_writel(value, pm_data.ramc[id] + field)
+ __raw_writel(value, soc_pm.data.ramc[id] + field)
static int at91_pm_valid_state(suspend_state_t state)
{
@@ -91,6 +100,8 @@ static const struct wakeup_source_info ws_info[] = {
{ .pmc_fsmr_bit = AT91_PMC_RTCAL, .shdwc_mr_bit = BIT(17) },
{ .pmc_fsmr_bit = AT91_PMC_USBAL },
{ .pmc_fsmr_bit = AT91_PMC_SDMMC_CD },
+ { .pmc_fsmr_bit = AT91_PMC_RTTAL },
+ { .pmc_fsmr_bit = AT91_PMC_RXLP_MCE },
};
static const struct of_device_id sama5d2_ws_ids[] = {
@@ -105,6 +116,17 @@ static const struct of_device_id sama5d2_ws_ids[] = {
{ /* sentinel */ }
};
+static const struct of_device_id sam9x60_ws_ids[] = {
+ { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] },
+ { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
+ { .compatible = "usb-ohci", .data = &ws_info[2] },
+ { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
+ { .compatible = "usb-ehci", .data = &ws_info[2] },
+ { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] },
+ { .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] },
+ { /* sentinel */ }
+};
+
static int at91_pm_config_ws(unsigned int pm_mode, bool set)
{
const struct wakeup_source_info *wsi;
@@ -116,24 +138,22 @@ static int at91_pm_config_ws(unsigned int pm_mode, bool set)
if (pm_mode != AT91_PM_ULP1)
return 0;
- if (!pm_data.pmc || !pm_data.shdwc)
+ if (!soc_pm.data.pmc || !soc_pm.data.shdwc || !soc_pm.ws_ids)
return -EPERM;
if (!set) {
- writel(mode, pm_data.pmc + AT91_PMC_FSMR);
+ writel(mode, soc_pm.data.pmc + AT91_PMC_FSMR);
return 0;
}
- /* SHDWC.WUIR */
- val = readl(pm_data.shdwc + 0x0c);
- mode |= (val & 0x3ff);
- polarity |= ((val >> 16) & 0x3ff);
+ if (soc_pm.config_shdwc_ws)
+ soc_pm.config_shdwc_ws(soc_pm.data.shdwc, &mode, &polarity);
/* SHDWC.MR */
- val = readl(pm_data.shdwc + 0x04);
+ val = readl(soc_pm.data.shdwc + 0x04);
/* Loop through defined wakeup sources. */
- for_each_matching_node_and_match(np, sama5d2_ws_ids, &match) {
+ for_each_matching_node_and_match(np, soc_pm.ws_ids, &match) {
pdev = of_find_device_by_node(np);
if (!pdev)
continue;
@@ -155,8 +175,8 @@ put_device:
}
if (mode) {
- writel(mode, pm_data.pmc + AT91_PMC_FSMR);
- writel(polarity, pm_data.pmc + AT91_PMC_FSPR);
+ if (soc_pm.config_pmc_ws)
+ soc_pm.config_pmc_ws(soc_pm.data.pmc, mode, polarity);
} else {
pr_err("AT91: PM: no ULP1 wakeup sources found!");
}
@@ -164,6 +184,34 @@ put_device:
return mode ? 0 : -EPERM;
}
+static int at91_sama5d2_config_shdwc_ws(void __iomem *shdwc, u32 *mode,
+ u32 *polarity)
+{
+ u32 val;
+
+ /* SHDWC.WUIR */
+ val = readl(shdwc + 0x0c);
+ *mode |= (val & 0x3ff);
+ *polarity |= ((val >> 16) & 0x3ff);
+
+ return 0;
+}
+
+static int at91_sama5d2_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
+{
+ writel(mode, pmc + AT91_PMC_FSMR);
+ writel(polarity, pmc + AT91_PMC_FSPR);
+
+ return 0;
+}
+
+static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
+{
+ writel(mode, pmc + AT91_PMC_FSMR);
+
+ return 0;
+}
+
/*
* Called after processes are frozen, but before we shutdown devices.
*/
@@ -171,18 +219,18 @@ static int at91_pm_begin(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_MEM:
- pm_data.mode = pm_data.suspend_mode;
+ soc_pm.data.mode = soc_pm.data.suspend_mode;
break;
case PM_SUSPEND_STANDBY:
- pm_data.mode = pm_data.standby_mode;
+ soc_pm.data.mode = soc_pm.data.standby_mode;
break;
default:
- pm_data.mode = -1;
+ soc_pm.data.mode = -1;
}
- return at91_pm_config_ws(pm_data.mode, true);
+ return at91_pm_config_ws(soc_pm.data.mode, true);
}
/*
@@ -194,10 +242,10 @@ static int at91_pm_verify_clocks(void)
unsigned long scsr;
int i;
- scsr = readl(pm_data.pmc + AT91_PMC_SCSR);
+ scsr = readl(soc_pm.data.pmc + AT91_PMC_SCSR);
/* USB must not be using PLLB */
- if ((scsr & pm_data.uhp_udp_mask) != 0) {
+ if ((scsr & soc_pm.data.uhp_udp_mask) != 0) {
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
@@ -208,7 +256,7 @@ static int at91_pm_verify_clocks(void)
if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
continue;
- css = readl(pm_data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+ css = readl(soc_pm.data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
if (css != AT91_PMC_CSS_SLOW) {
pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
return 0;
@@ -230,7 +278,7 @@ static int at91_pm_verify_clocks(void)
*/
int at91_suspend_entering_slow_clock(void)
{
- return (pm_data.mode >= AT91_PM_ULP0);
+ return (soc_pm.data.mode >= AT91_PM_ULP0);
}
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
@@ -243,14 +291,14 @@ static int at91_suspend_finish(unsigned long val)
flush_cache_all();
outer_disable();
- at91_suspend_sram_fn(&pm_data);
+ at91_suspend_sram_fn(&soc_pm.data);
return 0;
}
static void at91_pm_suspend(suspend_state_t state)
{
- if (pm_data.mode == AT91_PM_BACKUP) {
+ if (soc_pm.data.mode == AT91_PM_BACKUP) {
pm_bu->suspended = 1;
cpu_suspend(0, at91_suspend_finish);
@@ -289,7 +337,7 @@ static int at91_pm_enter(suspend_state_t state)
/*
* Ensure that clocks are in a valid state.
*/
- if (pm_data.mode >= AT91_PM_ULP0 &&
+ if (soc_pm.data.mode >= AT91_PM_ULP0 &&
!at91_pm_verify_clocks())
goto error;
@@ -318,7 +366,7 @@ error:
*/
static void at91_pm_end(void)
{
- at91_pm_config_ws(pm_data.mode, false);
+ at91_pm_config_ws(soc_pm.data.mode, false);
}
@@ -351,7 +399,7 @@ static void at91rm9200_standby(void)
" str %2, [%1, %3]\n\t"
" mcr p15, 0, %0, c7, c0, 4\n\t"
:
- : "r" (0), "r" (pm_data.ramc[0]),
+ : "r" (0), "r" (soc_pm.data.ramc[0]),
"r" (1), "r" (AT91_MC_SDRAMC_SRR));
}
@@ -374,7 +422,7 @@ static void at91_ddr_standby(void)
at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr);
}
- if (pm_data.ramc[1]) {
+ if (soc_pm.data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
@@ -392,14 +440,14 @@ static void at91_ddr_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- if (pm_data.ramc[1])
+ if (soc_pm.data.ramc[1])
at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0);
at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (pm_data.ramc[1]) {
+ if (soc_pm.data.ramc[1]) {
at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1);
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}
@@ -429,7 +477,7 @@ static void at91sam9_sdram_standby(void)
u32 lpr0, lpr1 = 0;
u32 saved_lpr0, saved_lpr1 = 0;
- if (pm_data.ramc[1]) {
+ if (soc_pm.data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
@@ -441,13 +489,13 @@ static void at91sam9_sdram_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- if (pm_data.ramc[1])
+ if (soc_pm.data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- if (pm_data.ramc[1])
+ if (soc_pm.data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
}
@@ -480,14 +528,14 @@ static __init void at91_dt_ramc(void)
const struct ramc_info *ramc;
for_each_matching_node_and_match(np, ramc_ids, &of_id) {
- pm_data.ramc[idx] = of_iomap(np, 0);
- if (!pm_data.ramc[idx])
+ soc_pm.data.ramc[idx] = of_iomap(np, 0);
+ if (!soc_pm.data.ramc[idx])
panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
ramc = of_id->data;
if (!standby)
standby = ramc->idle;
- pm_data.memctrl = ramc->memctrl;
+ soc_pm.data.memctrl = ramc->memctrl;
idx++;
}
@@ -509,12 +557,17 @@ static void at91rm9200_idle(void)
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
- writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
+ writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
+}
+
+static void at91sam9x60_idle(void)
+{
+ cpu_do_idle();
}
static void at91sam9_idle(void)
{
- writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
+ writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
cpu_do_idle();
}
@@ -566,8 +619,8 @@ static void __init at91_pm_sram_init(void)
static bool __init at91_is_pm_mode_active(int pm_mode)
{
- return (pm_data.standby_mode == pm_mode ||
- pm_data.suspend_mode == pm_mode);
+ return (soc_pm.data.standby_mode == pm_mode ||
+ soc_pm.data.suspend_mode == pm_mode);
}
static int __init at91_pm_backup_init(void)
@@ -577,6 +630,9 @@ static int __init at91_pm_backup_init(void)
struct platform_device *pdev = NULL;
int ret = -ENODEV;
+ if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
+ return -EPERM;
+
if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
return 0;
@@ -586,7 +642,7 @@ static int __init at91_pm_backup_init(void)
return ret;
}
- pm_data.sfrbu = of_iomap(np, 0);
+ soc_pm.data.sfrbu = of_iomap(np, 0);
of_node_put(np);
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
@@ -622,8 +678,8 @@ static int __init at91_pm_backup_init(void)
securam_fail:
put_device(&pdev->dev);
securam_fail_no_ref_dev:
- iounmap(pm_data.sfrbu);
- pm_data.sfrbu = NULL;
+ iounmap(soc_pm.data.sfrbu);
+ soc_pm.data.sfrbu = NULL;
return ret;
}
@@ -632,10 +688,10 @@ static void __init at91_pm_use_default_mode(int pm_mode)
if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP)
return;
- if (pm_data.standby_mode == pm_mode)
- pm_data.standby_mode = AT91_PM_ULP0;
- if (pm_data.suspend_mode == pm_mode)
- pm_data.suspend_mode = AT91_PM_ULP0;
+ if (soc_pm.data.standby_mode == pm_mode)
+ soc_pm.data.standby_mode = AT91_PM_ULP0;
+ if (soc_pm.data.suspend_mode == pm_mode)
+ soc_pm.data.suspend_mode = AT91_PM_ULP0;
}
static void __init at91_pm_modes_init(void)
@@ -653,7 +709,7 @@ static void __init at91_pm_modes_init(void)
goto ulp1_default;
}
- pm_data.shdwc = of_iomap(np, 0);
+ soc_pm.data.shdwc = of_iomap(np, 0);
of_node_put(np);
ret = at91_pm_backup_init();
@@ -667,8 +723,8 @@ static void __init at91_pm_modes_init(void)
return;
unmap:
- iounmap(pm_data.shdwc);
- pm_data.shdwc = NULL;
+ iounmap(soc_pm.data.shdwc);
+ soc_pm.data.shdwc = NULL;
ulp1_default:
at91_pm_use_default_mode(AT91_PM_ULP1);
backup_default:
@@ -711,14 +767,14 @@ static void __init at91_pm_init(void (*pm_idle)(void))
platform_device_register(&at91_cpuidle_device);
pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
- pm_data.pmc = of_iomap(pmc_np, 0);
- if (!pm_data.pmc) {
+ soc_pm.data.pmc = of_iomap(pmc_np, 0);
+ if (!soc_pm.data.pmc) {
pr_err("AT91: PM not supported, PMC not found\n");
return;
}
pmc = of_id->data;
- pm_data.uhp_udp_mask = pmc->uhp_udp_mask;
+ soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
if (pm_idle)
arm_pm_idle = pm_idle;
@@ -728,8 +784,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
if (at91_suspend_sram_fn) {
suspend_set_ops(&at91_pm_ops);
pr_info("AT91: PM: standby: %s, suspend: %s\n",
- pm_modes[pm_data.standby_mode].pattern,
- pm_modes[pm_data.suspend_mode].pattern);
+ pm_modes[soc_pm.data.standby_mode].pattern,
+ pm_modes[soc_pm.data.suspend_mode].pattern);
} else {
pr_info("AT91: PM not supported, due to no SRAM allocated\n");
}
@@ -750,6 +806,19 @@ void __init at91rm9200_pm_init(void)
at91_pm_init(at91rm9200_idle);
}
+void __init sam9x60_pm_init(void)
+{
+ if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
+ return;
+
+ at91_pm_modes_init();
+ at91_dt_ramc();
+ at91_pm_init(at91sam9x60_idle);
+
+ soc_pm.ws_ids = sam9x60_ws_ids;
+ soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
+}
+
void __init at91sam9_pm_init(void)
{
if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
@@ -775,6 +844,10 @@ void __init sama5d2_pm_init(void)
at91_pm_modes_init();
sama5_pm_init();
+
+ soc_pm.ws_ids = sama5d2_ws_ids;
+ soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
+ soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
}
static int __init at91_pm_modes_select(char *str)
@@ -795,8 +868,8 @@ static int __init at91_pm_modes_select(char *str)
if (suspend < 0)
return 0;
- pm_data.standby_mode = standby;
- pm_data.suspend_mode = suspend;
+ soc_pm.data.standby_mode = standby;
+ soc_pm.data.suspend_mode = suspend;
return 0;
}
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index bfe1c4d06901..77e29309cc6e 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -51,15 +51,6 @@ tmp2 .req r5
.endm
/*
- * Wait until PLLA has locked.
- */
- .macro wait_pllalock
-1: ldr tmp1, [pmc, #AT91_PMC_SR]
- tst tmp1, #AT91_PMC_LOCKA
- beq 1b
- .endm
-
-/*
* Put the processor to enter the idle state
*/
.macro at91_cpu_idle
@@ -178,11 +169,46 @@ ENDPROC(at91_backup_mode)
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
+ /* Save RC oscillator state */
+ ldr tmp1, [pmc, #AT91_PMC_SR]
+ str tmp1, .saved_osc_status
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 1f
+
+ /* Turn off RC oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ bic tmp1, tmp1, #AT91_PMC_MOSCRCEN
+ bic tmp1, tmp1, #AT91_PMC_KEY_MASK
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ /* Wait main RC disabled done */
+2: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 2b
+
/* Wait for interrupt */
- at91_cpu_idle
+1: at91_cpu_idle
- /* Turn on the crystal oscillator */
+ /* Restore RC oscillator state */
+ ldr tmp1, .saved_osc_status
+ tst tmp1, #AT91_PMC_MOSCRCS
+ beq 4f
+
+ /* Turn on RC oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ orr tmp1, tmp1, #AT91_PMC_MOSCRCEN
+ bic tmp1, tmp1, #AT91_PMC_KEY_MASK
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ /* Wait main RC stabilization */
+3: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCRCS
+ beq 3b
+
+ /* Turn on the crystal oscillator */
+4: ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
@@ -197,8 +223,26 @@ ENDPROC(at91_backup_mode)
.macro at91_pm_ulp1_mode
ldr pmc, .pmc_base
- /* Switch the main clock source to 12-MHz RC oscillator */
+ /* Save RC oscillator state and check if it is enabled. */
+ ldr tmp1, [pmc, #AT91_PMC_SR]
+ str tmp1, .saved_osc_status
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 2f
+
+ /* Enable RC oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ orr tmp1, tmp1, #AT91_PMC_MOSCRCEN
+ bic tmp1, tmp1, #AT91_PMC_KEY_MASK
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ /* Wait main RC stabilization */
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCRCS
+ beq 1b
+
+ /* Switch the main clock source to 12-MHz RC oscillator */
+2: ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCSEL
bic tmp1, tmp1, #AT91_PMC_KEY_MASK
orr tmp1, tmp1, #AT91_PMC_KEY
@@ -262,6 +306,25 @@ ENDPROC(at91_backup_mode)
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
+
+ /* Restore RC oscillator state */
+ ldr tmp1, .saved_osc_status
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 3f
+
+ /* Disable RC oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ bic tmp1, tmp1, #AT91_PMC_MOSCRCEN
+ bic tmp1, tmp1, #AT91_PMC_KEY_MASK
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ /* Wait RC oscillator disable done */
+4: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 4b
+
+3:
.endm
ENTRY(at91_ulp_mode)
@@ -279,14 +342,6 @@ ENTRY(at91_ulp_mode)
wait_mckrdy
- /* Save PLLA setting and disable it */
- ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
- str tmp1, .saved_pllar
-
- mov tmp1, #AT91_PMC_PLLCOUNT
- orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
- str tmp1, [pmc, #AT91_CKGR_PLLAR]
-
ldr r0, .pm_mode
cmp r0, #AT91_PM_ULP1
beq ulp1_mode
@@ -301,18 +356,6 @@ ulp1_mode:
ulp_exit:
ldr pmc, .pmc_base
- /* Restore PLLA setting */
- ldr tmp1, .saved_pllar
- str tmp1, [pmc, #AT91_CKGR_PLLAR]
-
- tst tmp1, #(AT91_PMC_MUL & 0xff0000)
- bne 3f
- tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
- beq 4f
-3:
- wait_pllalock
-4:
-
/*
* Restore master clock setting
*/
@@ -465,8 +508,6 @@ ENDPROC(at91_sramc_self_refresh)
.word 0
.saved_mckr:
.word 0
-.saved_pllar:
- .word 0
.saved_sam9_lpr:
.word 0
.saved_sam9_lpr1:
@@ -475,6 +516,8 @@ ENDPROC(at91_sramc_self_refresh)
.word 0
.saved_sam9_mdr1:
.word 0
+.saved_osc_status:
+ .word 0
ENTRY(at91_pm_suspend_in_sram_sz)
.word .-at91_pm_suspend_in_sram
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index cc5f15679d29..381f452de28d 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -27,7 +27,6 @@
#include <linux/cpu.h>
#include <linux/pci.h>
#include <linux/sched_clock.h>
-#include <linux/bitops.h>
#include <linux/irqchip/irq-ixp4xx.h>
#include <linux/platform_data/timer-ixp4xx.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index 0b10acd7d1b9..d2df5ef9382b 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -136,7 +136,6 @@ static void __init i2c_quirk(void)
of_update_property(np, new_compat);
}
- return;
}
static void __init mvebu_dt_init(void)
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index 8b2fbc8b6bc6..2d962fe48821 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -66,7 +66,7 @@ ENDPROC(ll_get_coherency_base)
* fabric registers
*/
ENTRY(ll_get_coherency_cpumask)
- mrc 15, 0, r3, cr0, cr0, 5
+ mrc p15, 0, r3, cr0, cr0, 5
and r3, r3, #15
mov r2, #(1 << 24)
lsl r3, r2, r3
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 9b5f4d665374..ceaad6d5927e 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -108,8 +108,6 @@ static void __init kirkwood_dt_eth_fixup(void)
clk_prepare_enable(clk);
/* store MAC address register contents in local-mac-address */
- pr_err(FW_INFO "%pOF: local-mac-address is not set\n", np);
-
pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
if (!pmac)
goto eth_fixup_no_mem;
diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c
index db17121d7d63..070552511699 100644
--- a/arch/arm/mach-mvebu/pm-board.c
+++ b/arch/arm/mach-mvebu/pm-board.c
@@ -79,7 +79,7 @@ static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd)
static int __init mvebu_armada_pm_init(void)
{
struct device_node *np;
- struct device_node *gpio_ctrl_np;
+ struct device_node *gpio_ctrl_np = NULL;
int ret = 0, i;
if (!of_machine_is_compatible("marvell,axp-gp"))
@@ -126,18 +126,23 @@ static int __init mvebu_armada_pm_init(void)
goto out;
}
+ if (gpio_ctrl_np)
+ of_node_put(gpio_ctrl_np);
gpio_ctrl_np = args.np;
pic_raw_gpios[i] = args.args[0];
}
gpio_ctrl = of_iomap(gpio_ctrl_np, 0);
- if (!gpio_ctrl)
- return -ENOMEM;
+ if (!gpio_ctrl) {
+ ret = -ENOMEM;
+ goto out;
+ }
mvebu_pm_suspend_init(mvebu_armada_pm_enter);
out:
of_node_put(np);
+ of_node_put(gpio_ctrl_np);
return ret;
}
diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S
index 88651221dbdd..7aae9a25cfeb 100644
--- a/arch/arm/mach-mvebu/pmsu_ll.S
+++ b/arch/arm/mach-mvebu/pmsu_ll.S
@@ -16,7 +16,7 @@
ENTRY(armada_38x_scu_power_up)
mrc p15, 4, r1, c15, c0 @ get SCU base address
orr r1, r1, #0x8 @ SCU CPU Power Status Register
- mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID
+ mrc p15, 0, r0, cr0, cr0, 5 @ get the CPU ID
and r0, r0, #15
add r1, r1, r0
mov r0, #0x0
@@ -56,7 +56,6 @@ ENDPROC(armada_38x_cpu_resume)
/* The following code will be executed from SRAM */
ENTRY(mvebu_boot_wa_start)
-mvebu_boot_wa_start:
ARM_BE8(setend be)
adr r0, 1f
ldr r0, [r0] @ load the address of the
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 1b15d593837e..b6e814166ee0 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -749,7 +749,7 @@ static void __init ams_delta_init(void)
ARRAY_SIZE(ams_delta_gpio_tables));
leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
- if (!IS_ERR(leds_pdev)) {
+ if (!IS_ERR_OR_NULL(leds_pdev)) {
leds_gpio_table.dev_id = dev_name(&leds_pdev->dev);
gpiod_add_lookup_table(&leds_gpio_table);
}
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 0f4d91824e4b..1001410c4782 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -215,6 +215,7 @@ config ARCH_SYNQUACER
config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family"
select ARCH_HAS_RESET_CONTROLLER
+ select ARM_GIC_PM
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select TIMER_OF
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 75ee6cf1e1b4..14d7fea82daf 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -59,7 +59,7 @@
};
padctl@3520000 {
- status = "okay";
+ status = "disabled";
avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
avdd-usb-supply = <&vdd_3v3_sys>;
@@ -137,7 +137,7 @@
};
usb@3530000 {
- status = "okay";
+ status = "disabled";
phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
<&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index f0bb6ced4976..426ac0bdf6a6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -60,6 +60,7 @@
clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
resets = <&bpmp TEGRA186_RESET_EQOS>;
reset-names = "eqos";
+ iommus = <&smmu TEGRA186_SID_EQOS>;
status = "disabled";
snps,write-requests = <1>;
@@ -338,6 +339,7 @@
<&bpmp TEGRA186_RESET_HDA2CODEC_2X>;
reset-names = "hda", "hda2hdmi", "hda2codec_2x";
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+ iommus = <&smmu TEGRA186_SID_HDA>;
status = "disabled";
};
@@ -671,6 +673,10 @@
<&bpmp TEGRA186_RESET_PCIEXCLK>;
reset-names = "afi", "pex", "pcie_x";
+ iommus = <&smmu TEGRA186_SID_AFI>;
+ iommu-map = <0x0 &smmu TEGRA186_SID_AFI 0x1000>;
+ iommu-map-mask = <0x0>;
+
status = "disabled";
pci@1,0 {
@@ -1158,6 +1164,7 @@
bpmp: bpmp {
compatible = "nvidia,tegra186-bpmp";
+ iommus = <&smmu TEGRA186_SID_BPMP>;
mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
TEGRA_HSP_DB_MASTER_BPMP>;
shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index eb6be5675f79..4bb862c6b083 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -75,7 +75,9 @@
"sprd,sc9836-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ext_26m>;
+ clock-names = "enable", "uart", "source";
+ clocks = <&apapb_gate CLK_UART0_EB>,
+ <&ap_clk CLK_UART0>, <&ext_26m>;
status = "disabled";
};
@@ -84,7 +86,9 @@
"sprd,sc9836-uart";
reg = <0x100000 0x100>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ext_26m>;
+ clock-names = "enable", "uart", "source";
+ clocks = <&apapb_gate CLK_UART1_EB>,
+ <&ap_clk CLK_UART1>, <&ext_26m>;
status = "disabled";
};
@@ -93,7 +97,9 @@
"sprd,sc9836-uart";
reg = <0x200000 0x100>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ext_26m>;
+ clock-names = "enable", "uart", "source";
+ clocks = <&apapb_gate CLK_UART2_EB>,
+ <&ap_clk CLK_UART2>, <&ext_26m>;
status = "disabled";
};
@@ -102,7 +108,9 @@
"sprd,sc9836-uart";
reg = <0x300000 0x100>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ext_26m>;
+ clock-names = "enable", "uart", "source";
+ clocks = <&apapb_gate CLK_UART3_EB>,
+ <&ap_clk CLK_UART3>, <&ext_26m>;
status = "disabled";
};
};