diff options
Diffstat (limited to 'arch/x86/kernel/io_apic_64.c')
| -rw-r--r-- | arch/x86/kernel/io_apic_64.c | 160 |
1 files changed, 85 insertions, 75 deletions
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 07e1e45ee026..847aa7987645 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -57,6 +57,47 @@ #define __apicdebuginit(type) static type __init +int ioapic_force; + +int sis_apic_bug; /* not actually supported, dummy for compile */ + +static DEFINE_SPINLOCK(ioapic_lock); +static DEFINE_SPINLOCK(vector_lock); + +int first_free_entry; +/* + * Rough estimation of how many shared IRQs there are, can + * be changed anytime. + */ +int pin_map_size; + +/* + * # of IRQ routing registers + */ +int nr_ioapic_registers[MAX_IO_APICS]; + +/* I/O APIC entries */ +struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; +int nr_ioapics; + +/* MP IRQ source entries */ +struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; + +/* # of MP IRQ source entries */ +int mp_irq_entries; + +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + +int skip_ioapic_setup; + +static int __init parse_noapic(char *str) +{ + disable_ioapic_setup(); + return 0; +} +early_param("noapic", parse_noapic); + + struct irq_cfg; struct irq_pin_list; struct irq_cfg { @@ -228,53 +269,6 @@ static struct irq_cfg *irq_cfg_alloc(unsigned int irq) return cfg; } -static int assign_irq_vector(int irq, cpumask_t mask); - -int first_system_vector = 0xfe; - -char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; - -int sis_apic_bug; /* not actually supported, dummy for compile */ - -static int no_timer_check; - -static int disable_timer_pin_1 __initdata; - -int timer_through_8259 __initdata; - -/* Where if anywhere is the i8259 connect in external int mode */ -static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; - -static DEFINE_SPINLOCK(ioapic_lock); -static DEFINE_SPINLOCK(vector_lock); - -/* - * # of IRQ routing registers - */ -int nr_ioapic_registers[MAX_IO_APICS]; - -/* I/O APIC RTE contents at the OS boot up */ -struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS]; - -/* I/O APIC entries */ -struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; -int nr_ioapics; - -/* MP IRQ source entries */ -struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; - -/* # of MP IRQ source entries */ -int mp_irq_entries; - -DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); - -/* - * Rough estimation of how many shared IRQs there are, can - * be changed anytime. - */ - -int pin_map_size; - /* * This is performance-critical, we want to do it O(1) * @@ -481,12 +475,16 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) apic = entry->apic; pin = entry->pin; +#ifdef CONFIG_INTR_REMAP /* * With interrupt-remapping, destination information comes * from interrupt-remapping table entry. */ if (!irq_remapped(irq)) io_apic_write(apic, 0x11 + pin*2, dest); +#else + io_apic_write(apic, 0x11 + pin*2, dest); +#endif reg = io_apic_read(apic, 0x10 + pin*2); reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; @@ -497,6 +495,8 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) } } +static int assign_irq_vector(int irq, cpumask_t mask); + static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) { struct irq_cfg *cfg = irq_cfg(irq); @@ -533,7 +533,6 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) * shared ISA-space IRQs, so we have to support them. We are super * fast in the common case, and fast for shared ISA-space IRQs. */ -int first_free_entry; static void add_pin_to_irq(unsigned int irq, int apic, int pin) { struct irq_cfg *cfg; @@ -679,6 +678,10 @@ static void clear_IO_APIC (void) clear_IO_APIC_pin(apic, pin); } +#ifdef CONFIG_INTR_REMAP +/* I/O APIC RTE contents at the OS boot up */ +static struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS]; + /* * Saves and masks all the unmasked IO-APIC RTE's */ @@ -741,25 +744,7 @@ void reinit_intr_remapped_IO_APIC(int intr_remapping) */ restore_IO_APIC_setup(); } - -int skip_ioapic_setup; -int ioapic_force; - -static int __init parse_noapic(char *str) -{ - disable_ioapic_setup(); - return 0; -} -early_param("noapic", parse_noapic); - -/* Actually the next is obsolete, but keep it for paranoid reasons -AK */ -static int __init disable_timer_pin_setup(char *arg) -{ - disable_timer_pin_1 = 1; - return 1; -} -__setup("disable_timer_pin_1", disable_timer_pin_setup); - +#endif /* * Find the IRQ entry number of a certain pin. @@ -1327,8 +1312,10 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, { struct IO_APIC_route_entry entry; +#ifdef CONFIG_INTR_REMAP if (intr_remapping_enabled) return; +#endif memset(&entry, 0, sizeof(entry)); @@ -1601,6 +1588,9 @@ __apicdebuginit(int) print_all_ICs(void) fs_initcall(print_all_ICs); +/* Where if anywhere is the i8259 connect in external int mode */ +static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; + void __init enable_IO_APIC(void) { union IO_APIC_reg_01 reg_01; @@ -1695,6 +1685,15 @@ void disable_IO_APIC(void) disconnect_bsp_APIC(ioapic_i8259.pin != -1); } +static int no_timer_check; + +static int __init notimercheck(char *s) +{ + no_timer_check = 1; + return 1; +} +__setup("no_timer_check", notimercheck); + /* * There is a nasty bug in some older SMP boards, their mptable lies * about the timer IRQ. We do the following to work around the situation: @@ -1708,6 +1707,9 @@ static int __init timer_irq_works(void) unsigned long t1 = jiffies; unsigned long flags; + if (no_timer_check) + return 1; + local_save_flags(flags); local_irq_enable(); /* Let ten ticks pass... */ @@ -2239,6 +2241,17 @@ static inline void __init unlock_ExtINT_logic(void) ioapic_write_entry(apic, pin, entry0); } +static int disable_timer_pin_1 __initdata; +/* Actually the next is obsolete, but keep it for paranoid reasons -AK */ +static int __init disable_timer_pin_setup(char *arg) +{ + disable_timer_pin_1 = 1; + return 0; +} +early_param("disable_timer_pin_1", disable_timer_pin_setup); + +int timer_through_8259 __initdata; + /* * This code may look a bit paranoid, but it's supposed to cooperate with * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ @@ -2286,8 +2299,10 @@ static inline void __init check_timer(void) * 8259A. */ if (pin1 == -1) { +#ifdef CONFIG_INTR_REMAP if (intr_remapping_enabled) panic("BIOS bug: timer not connected to IO-APIC"); +#endif pin1 = pin2; apic1 = apic2; no_pin1 = 1; @@ -2305,7 +2320,7 @@ static inline void __init check_timer(void) setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); } unmask_IO_APIC_irq(0); - if (!no_timer_check && timer_irq_works()) { + if (timer_irq_works()) { if (nmi_watchdog == NMI_IO_APIC) { setup_nmi(); enable_8259A_irq(0); @@ -2314,8 +2329,10 @@ static inline void __init check_timer(void) clear_IO_APIC_pin(0, pin1); goto out; } +#ifdef CONFIG_INTR_REMAP if (intr_remapping_enabled) panic("timer doesn't work through Interrupt-remapped IO-APIC"); +#endif clear_IO_APIC_pin(apic1, pin1); if (!no_pin1) apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " @@ -2391,13 +2408,6 @@ out: local_irq_restore(flags); } -static int __init notimercheck(char *s) -{ - no_timer_check = 1; - return 1; -} -__setup("no_timer_check", notimercheck); - /* * Traditionally ISA IRQ2 is the cascade IRQ, and is not available * to devices. However there may be an I/O APIC pin available for |