1 files changed, 359 insertions, 188 deletions

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index cae9cabc3031..32e73520adf7 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -1,13 +1,22 @@
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/mm.h>
+
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/apic.h>
 
+#ifdef CONFIG_X86_64
+# include <asm/numa_64.h>
+# include <asm/mmconfig.h>
+# include <asm/cacheflush.h>
+#endif
+
 #include <mach_apic.h>
+
 #include "cpu.h"
 
+#ifdef CONFIG_X86_32
 /*
  *	B step AMD K6 before B 9730xxxx have hardware bugs that can cause
  *	misexecution of code under Linux. Owners of such processors should
@@ -24,21 +33,273 @@
 extern void vide(void);
 __asm__(".align 4\nvide: ret");
 
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c)
 {
-	if (cpuid_eax(0x80000000) >= 0x80000007) {
-		c->x86_power = cpuid_edx(0x80000007);
-		if (c->x86_power & (1<<8))
-			set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+/*
+ * General Systems BIOSen alias the cpu frequency registers
+ * of the Elan at 0x000df000. Unfortuantly, one of the Linux
+ * drivers subsequently pokes it, and changes the CPU speed.
+ * Workaround : Remove the unneeded alias.
+ */
+#define CBAR		(0xfffc) /* Configuration Base Address  (32-bit) */
+#define CBAR_ENB	(0x80000000)
+#define CBAR_KEY	(0X000000CB)
+	if (c->x86_model == 9 || c->x86_model == 10) {
+		if (inl (CBAR) & CBAR_ENB)
+			outl (0 | CBAR_KEY, CBAR);
 	}
 }
 
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
+
+static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int mbytes = num_physpages >> (20-PAGE_SHIFT);
-	int r;
 
+	if (c->x86_model < 6) {
+		/* Based on AMD doc 20734R - June 2000 */
+		if (c->x86_model == 0) {
+			clear_cpu_cap(c, X86_FEATURE_APIC);
+			set_cpu_cap(c, X86_FEATURE_PGE);
+		}
+		return;
+	}
+
+	if (c->x86_model == 6 && c->x86_mask == 1) {
+		const int K6_BUG_LOOP = 1000000;
+		int n;
+		void (*f_vide)(void);
+		unsigned long d, d2;
+
+		printk(KERN_INFO "AMD K6 stepping B detected - ");
+
+		/*
+		 * It looks like AMD fixed the 2.6.2 bug and improved indirect
+		 * calls at the same time.
+		 */
+
+		n = K6_BUG_LOOP;
+		f_vide = vide;
+		rdtscl(d);
+		while (n--)
+			f_vide();
+		rdtscl(d2);
+		d = d2-d;
+
+		if (d > 20*K6_BUG_LOOP)
+			printk("system stability may be impaired when more than 32 MB are used.\n");
+		else
+			printk("probably OK (after B9730xxxx).\n");
+		printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
+	}
+
+	/* K6 with old style WHCR */
+	if (c->x86_model < 8 ||
+	   (c->x86_model == 8 && c->x86_mask < 8)) {
+		/* We can only write allocate on the low 508Mb */
+		if (mbytes > 508)
+			mbytes = 508;
+
+		rdmsr(MSR_K6_WHCR, l, h);
+		if ((l&0x0000FFFF) == 0) {
+			unsigned long flags;
+			l = (1<<0)|((mbytes/4)<<1);
+			local_irq_save(flags);
+			wbinvd();
+			wrmsr(MSR_K6_WHCR, l, h);
+			local_irq_restore(flags);
+			printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
+				mbytes);
+		}
+		return;
+	}
+
+	if ((c->x86_model == 8 && c->x86_mask > 7) ||
+	     c->x86_model == 9 || c->x86_model == 13) {
+		/* The more serious chips .. */
+
+		if (mbytes > 4092)
+			mbytes = 4092;
+
+		rdmsr(MSR_K6_WHCR, l, h);
+		if ((l&0xFFFF0000) == 0) {
+			unsigned long flags;
+			l = ((mbytes>>2)<<22)|(1<<16);
+			local_irq_save(flags);
+			wbinvd();
+			wrmsr(MSR_K6_WHCR, l, h);
+			local_irq_restore(flags);
+			printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
+				mbytes);
+		}
+
+		return;
+	}
+
+	if (c->x86_model == 10) {
+		/* AMD Geode LX is model 10 */
+		/* placeholder for any needed mods */
+		return;
+	}
+}
+
+static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+
+	/*
+	 * Bit 15 of Athlon specific MSR 15, needs to be 0
+	 * to enable SSE on Palomino/Morgan/Barton CPU's.
+	 * If the BIOS didn't enable it already, enable it here.
+	 */
+	if (c->x86_model >= 6 && c->x86_model <= 10) {
+		if (!cpu_has(c, X86_FEATURE_XMM)) {
+			printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
+			rdmsr(MSR_K7_HWCR, l, h);
+			l &= ~0x00008000;
+			wrmsr(MSR_K7_HWCR, l, h);
+			set_cpu_cap(c, X86_FEATURE_XMM);
+		}
+	}
+
+	/*
+	 * It's been determined by AMD that Athlons since model 8 stepping 1
+	 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
+	 * As per AMD technical note 27212 0.2
+	 */
+	if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
+		rdmsr(MSR_K7_CLK_CTL, l, h);
+		if ((l & 0xfff00000) != 0x20000000) {
+			printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
+				((l & 0x000fffff)|0x20000000));
+			wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
+		}
+	}
+
+	set_cpu_cap(c, X86_FEATURE_K7);
+}
+#endif
+
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+static int __cpuinit nearby_node(int apicid)
+{
+	int i, node;
+
+	for (i = apicid - 1; i >= 0; i--) {
+		node = apicid_to_node[i];
+		if (node != NUMA_NO_NODE && node_online(node))
+			return node;
+	}
+	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
+		node = apicid_to_node[i];
+		if (node != NUMA_NO_NODE && node_online(node))
+			return node;
+	}
+	return first_node(node_online_map); /* Shouldn't happen */
+}
+#endif
+
+/*
+ * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
+ * Assumes number of cores is a power of two.
+ */
+static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_HT
+	unsigned bits;
+
+	bits = c->x86_coreid_bits;
+
+	/* Low order bits define the core id (index of core in socket) */
+	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
+	/* Convert the initial APIC ID into the socket ID */
+	c->phys_proc_id = c->initial_apicid >> bits;
+#endif
+}
+
+static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
+{
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+	int cpu = smp_processor_id();
+	int node;
+	unsigned apicid = hard_smp_processor_id();
+
+	node = c->phys_proc_id;
+	if (apicid_to_node[apicid] != NUMA_NO_NODE)
+		node = apicid_to_node[apicid];
+	if (!node_online(node)) {
+		/* Two possibilities here:
+		   - The CPU is missing memory and no node was created.
+		   In that case try picking one from a nearby CPU
+		   - The APIC IDs differ from the HyperTransport node IDs
+		   which the K8 northbridge parsing fills in.
+		   Assume they are all increased by a constant offset,
+		   but in the same order as the HT nodeids.
+		   If that doesn't result in a usable node fall back to the
+		   path for the previous case.  */
+
+		int ht_nodeid = c->initial_apicid;
+
+		if (ht_nodeid >= 0 &&
+		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+			node = apicid_to_node[ht_nodeid];
+		/* Pick a nearby node */
+		if (!node_online(node))
+			node = nearby_node(apicid);
+	}
+	numa_set_node(cpu, node);
+
+	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
+#endif
+}
+
+static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_HT
+	unsigned bits, ecx;
+
+	/* Multi core CPU? */
+	if (c->extended_cpuid_level < 0x80000008)
+		return;
+
+	ecx = cpuid_ecx(0x80000008);
+
+	c->x86_max_cores = (ecx & 0xff) + 1;
+
+	/* CPU telling us the core id bits shift? */
+	bits = (ecx >> 12) & 0xF;
+
+	/* Otherwise recompute */
+	if (bits == 0) {
+		while ((1 << bits) < c->x86_max_cores)
+			bits++;
+	}
+
+	c->x86_coreid_bits = bits;
+#endif
+}
+
+static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+{
+	early_init_amd_mc(c);
+
+	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
+	if (c->x86_power & (1<<8))
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+#ifdef CONFIG_X86_64
+	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
+#else
+	/*  Set MTRR capability flag if appropriate */
+	if (c->x86 == 5)
+		if (c->x86_model == 13 || c->x86_model == 9 ||
+		    (c->x86_model == 8 && c->x86_mask >= 8))
+			set_cpu_cap(c, X86_FEATURE_K6_MTRR);
+#endif
+}
+
+static void __cpuinit init_amd(struct cpuinfo_x86 *c)
+{
 #ifdef CONFIG_SMP
 	unsigned long long value;
 
@@ -49,7 +310,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 	 * Errata 63 for SH-B3 steppings
 	 * Errata 122 for all steppings (F+ have it disabled by default)
 	 */
-	if (c->x86 == 15) {
+	if (c->x86 == 0xf) {
 		rdmsrl(MSR_K7_HWCR, value);
 		value |= 1 << 6;
 		wrmsrl(MSR_K7_HWCR, value);
@@ -59,213 +320,119 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 	early_init_amd(c);
 
 	/*
-	 *	FIXME: We should handle the K5 here. Set up the write
-	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
-	 *	no bus pipeline)
-	 */
-
-	/*
 	 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
 	 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
 	 */
 	clear_cpu_cap(c, 0*32+31);
 
-	r = get_model_name(c);
+#ifdef CONFIG_X86_64
+	/* On C+ stepping K8 rep microcode works well for copy/memset */
+	if (c->x86 == 0xf) {
+		u32 level;
 
-	switch (c->x86) {
-	case 4:
-		/*
-		 * General Systems BIOSen alias the cpu frequency registers
-		 * of the Elan at 0x000df000. Unfortuantly, one of the Linux
-		 * drivers subsequently pokes it, and changes the CPU speed.
-		 * Workaround : Remove the unneeded alias.
-		 */
-#define CBAR		(0xfffc) /* Configuration Base Address  (32-bit) */
-#define CBAR_ENB	(0x80000000)
-#define CBAR_KEY	(0X000000CB)
-			if (c->x86_model == 9 || c->x86_model == 10) {
-				if (inl (CBAR) & CBAR_ENB)
-					outl (0 | CBAR_KEY, CBAR);
-			}
-			break;
-	case 5:
-			if (c->x86_model < 6) {
-				/* Based on AMD doc 20734R - June 2000 */
-				if (c->x86_model == 0) {
-					clear_cpu_cap(c, X86_FEATURE_APIC);
-					set_cpu_cap(c, X86_FEATURE_PGE);
-				}
-				break;
-			}
-
-			if (c->x86_model == 6 && c->x86_mask == 1) {
-				const int K6_BUG_LOOP = 1000000;
-				int n;
-				void (*f_vide)(void);
-				unsigned long d, d2;
-
-				printk(KERN_INFO "AMD K6 stepping B detected - ");
-
-				/*
-				 * It looks like AMD fixed the 2.6.2 bug and improved indirect
-				 * calls at the same time.
-				 */
-
-				n = K6_BUG_LOOP;
-				f_vide = vide;
-				rdtscl(d);
-				while (n--)
-					f_vide();
-				rdtscl(d2);
-				d = d2-d;
-
-				if (d > 20*K6_BUG_LOOP)
-					printk("system stability may be impaired when more than 32 MB are used.\n");
-				else
-					printk("probably OK (after B9730xxxx).\n");
-				printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
-			}
-
-			/* K6 with old style WHCR */
-			if (c->x86_model < 8 ||
-			   (c->x86_model == 8 && c->x86_mask < 8)) {
-				/* We can only write allocate on the low 508Mb */
-				if (mbytes > 508)
-					mbytes = 508;
-
-				rdmsr(MSR_K6_WHCR, l, h);
-				if ((l&0x0000FFFF) == 0) {
-					unsigned long flags;
-					l = (1<<0)|((mbytes/4)<<1);
-					local_irq_save(flags);
-					wbinvd();
-					wrmsr(MSR_K6_WHCR, l, h);
-					local_irq_restore(flags);
-					printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
-						mbytes);
-				}
-				break;
-			}
-
-			if ((c->x86_model == 8 && c->x86_mask > 7) ||
-			     c->x86_model == 9 || c->x86_model == 13) {
-				/* The more serious chips .. */
-
-				if (mbytes > 4092)
-					mbytes = 4092;
-
-				rdmsr(MSR_K6_WHCR, l, h);
-				if ((l&0xFFFF0000) == 0) {
-					unsigned long flags;
-					l = ((mbytes>>2)<<22)|(1<<16);
-					local_irq_save(flags);
-					wbinvd();
-					wrmsr(MSR_K6_WHCR, l, h);
-					local_irq_restore(flags);
-					printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
-						mbytes);
-				}
-
-				/*  Set MTRR capability flag if appropriate */
-				if (c->x86_model == 13 || c->x86_model == 9 ||
-				   (c->x86_model == 8 && c->x86_mask >= 8))
-					set_cpu_cap(c, X86_FEATURE_K6_MTRR);
-				break;
-			}
-
-			if (c->x86_model == 10) {
-				/* AMD Geode LX is model 10 */
-				/* placeholder for any needed mods */
-				break;
-			}
-			break;
-	case 6: /* An Athlon/Duron */
-
-			/*
-			 * Bit 15 of Athlon specific MSR 15, needs to be 0
-			 * to enable SSE on Palomino/Morgan/Barton CPU's.
-			 * If the BIOS didn't enable it already, enable it here.
-			 */
-			if (c->x86_model >= 6 && c->x86_model <= 10) {
-				if (!cpu_has(c, X86_FEATURE_XMM)) {
-					printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
-					rdmsr(MSR_K7_HWCR, l, h);
-					l &= ~0x00008000;
-					wrmsr(MSR_K7_HWCR, l, h);
-					set_cpu_cap(c, X86_FEATURE_XMM);
-				}
-			}
-
-			/*
-			 * It's been determined by AMD that Athlons since model 8 stepping 1
-			 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
-			 * As per AMD technical note 27212 0.2
-			 */
-			if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
-				rdmsr(MSR_K7_CLK_CTL, l, h);
-				if ((l & 0xfff00000) != 0x20000000) {
-					printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
-						((l & 0x000fffff)|0x20000000));
-					wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
-				}
-			}
-			break;
+		level = cpuid_eax(1);
+		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
+			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 	}
+	if (c->x86 == 0x10 || c->x86 == 0x11)
+		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+#else
+
+	/*
+	 *	FIXME: We should handle the K5 here. Set up the write
+	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
+	 *	no bus pipeline)
+	 */
 
 	switch (c->x86) {
-	case 15:
-	/* Use K8 tuning for Fam10h and Fam11h */
-	case 0x10:
-	case 0x11:
-		set_cpu_cap(c, X86_FEATURE_K8);
+	case 4:
+		init_amd_k5(c);
 		break;
-	case 6:
-		set_cpu_cap(c, X86_FEATURE_K7);
+	case 5:
+		init_amd_k6(c);
+		break;
+	case 6: /* An Athlon/Duron */
+		init_amd_k7(c);
 		break;
 	}
+
+	/* K6s reports MCEs but don't actually have all the MSRs */
+	if (c->x86 < 6)
+		clear_cpu_cap(c, X86_FEATURE_MCE);
+#endif
+
+	/* Enable workaround for FXSAVE leak */
 	if (c->x86 >= 6)
 		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
 
-	display_cacheinfo(c);
-
-	if (cpuid_eax(0x80000000) >= 0x80000008)
-		c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
+	if (!c->x86_model_id[0]) {
+		switch (c->x86) {
+		case 0xf:
+			/* Should distinguish Models here, but this is only
+			   a fallback anyways. */
+			strcpy(c->x86_model_id, "Hammer");
+			break;
+		}
+	}
 
-#ifdef CONFIG_X86_HT
-	/*
-	 * On a AMD multi core setup the lower bits of the APIC id
-	 * distinguish the cores.
-	 */
-	if (c->x86_max_cores > 1) {
-		int cpu = smp_processor_id();
-		unsigned bits = (cpuid_ecx(0x80000008) >> 12) & 0xf;
+	display_cacheinfo(c);
 
-		if (bits == 0) {
-			while ((1 << bits) < c->x86_max_cores)
-				bits++;
-		}
-		c->cpu_core_id = c->phys_proc_id & ((1<<bits)-1);
-		c->phys_proc_id >>= bits;
-		printk(KERN_INFO "CPU %d(%d) -> Core %d\n",
-		       cpu, c->x86_max_cores, c->cpu_core_id);
+	/* Multi core CPU? */
+	if (c->extended_cpuid_level >= 0x80000008) {
+		amd_detect_cmp(c);
+		srat_detect_node(c);
 	}
+
+#ifdef CONFIG_X86_32
+	detect_ht(c);
 #endif
 
-	if (cpuid_eax(0x80000000) >= 0x80000006) {
-		if ((c->x86 == 0x10) && (cpuid_edx(0x80000006) & 0xf000))
+	if (c->extended_cpuid_level >= 0x80000006) {
+		if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000))
 			num_cache_leaves = 4;
 		else
 			num_cache_leaves = 3;
 	}
 
-	/* K6s reports MCEs but don't actually have all the MSRs */
-	if (c->x86 < 6)
-		clear_cpu_cap(c, X86_FEATURE_MCE);
+	if (c->x86 >= 0xf && c->x86 <= 0x11)
+		set_cpu_cap(c, X86_FEATURE_K8);
 
-	if (cpu_has_xmm2)
+	if (cpu_has_xmm2) {
+		/* MFENCE stops RDTSC speculation */
 		set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
+	}
+
+#ifdef CONFIG_X86_64
+	if (c->x86 == 0x10) {
+		/* do this for boot cpu */
+		if (c == &boot_cpu_data)
+			check_enable_amd_mmconf_dmi();
+
+		fam10h_check_enable_mmcfg();
+	}
+
+	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
+		unsigned long long tseg;
+
+		/*
+		 * Split up direct mapping around the TSEG SMM area.
+		 * Don't do it for gbpages because there seems very little
+		 * benefit in doing so.
+		 */
+		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
+		    printk(KERN_DEBUG "tseg: %010llx\n", tseg);
+		    if ((tseg>>PMD_SHIFT) <
+				(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
+			((tseg>>PMD_SHIFT) <
+				(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
+			 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
+			set_memory_4k((unsigned long)__va(tseg), 1);
+		}
+	}
+#endif
 }
 
+#ifdef CONFIG_X86_32
 static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 {
 	/* AMD errata T13 (order #21922) */
@@ -278,10 +445,12 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int
 	}
 	return size;
 }
+#endif
 
 static struct cpu_dev amd_cpu_dev __cpuinitdata = {
 	.c_vendor	= "AMD",
 	.c_ident	= { "AuthenticAMD" },
+#ifdef CONFIG_X86_32
 	.c_models = {
 		{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
 		  {
@@ -294,9 +463,11 @@ static struct cpu_dev amd_cpu_dev __cpuinitdata = {
 		  }
 		},
 	},
+	.c_size_cache	= amd_size_cache,
+#endif
 	.c_early_init   = early_init_amd,
 	.c_init		= init_amd,
-	.c_size_cache	= amd_size_cache,
+	.c_x86_vendor	= X86_VENDOR_AMD,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
+cpu_dev_register(amd_cpu_dev);