summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/aperture_64.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/aperture_64.c')
-rw-r--r--arch/x86/kernel/aperture_64.c307
1 files changed, 196 insertions, 111 deletions
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 479926d9e004..e819362c7068 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -35,6 +35,18 @@ int fallback_aper_force __initdata;
int fix_aperture __initdata = 1;
+struct bus_dev_range {
+ int bus;
+ int dev_base;
+ int dev_limit;
+};
+
+static struct bus_dev_range bus_dev_ranges[] __initdata = {
+ { 0x00, 0x18, 0x20},
+ { 0xff, 0x00, 0x20},
+ { 0xfe, 0x00, 0x20}
+};
+
static struct resource gart_resource = {
.name = "GART",
.flags = IORESOURCE_MEM,
@@ -55,8 +67,9 @@ static u32 __init allocate_aperture(void)
u32 aper_size;
void *p;
- if (fallback_aper_order > 7)
- fallback_aper_order = 7;
+ /* aper_size should <= 1G */
+ if (fallback_aper_order > 5)
+ fallback_aper_order = 5;
aper_size = (32 * 1024 * 1024) << fallback_aper_order;
/*
@@ -65,7 +78,20 @@ static u32 __init allocate_aperture(void)
* memory. Unfortunately we cannot move it up because that would
* make the IOMMU useless.
*/
- p = __alloc_bootmem_nopanic(aper_size, aper_size, 0);
+ /*
+ * using 512M as goal, in case kexec will load kernel_big
+ * that will do the on position decompress, and could overlap with
+ * that positon with gart that is used.
+ * sequende:
+ * kernel_small
+ * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
+ * ==> kernel_small(gart area become e820_reserved)
+ * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
+ * ==> kerne_big (uncompressed size will be big than 64M or 128M)
+ * so don't use 512M below as gart iommu, leave the space for kernel
+ * code for safe
+ */
+ p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20);
if (!p || __pa(p)+aper_size > 0xffffffff) {
printk(KERN_ERR
"Cannot allocate aperture memory hole (%p,%uK)\n",
@@ -83,69 +109,53 @@ static u32 __init allocate_aperture(void)
return (u32)__pa(p);
}
-static int __init aperture_valid(u64 aper_base, u32 aper_size)
-{
- if (!aper_base)
- return 0;
-
- if (aper_base + aper_size > 0x100000000UL) {
- printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n");
- return 0;
- }
- if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
- printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n");
- return 0;
- }
- if (aper_size < 64*1024*1024) {
- printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20);
- return 0;
- }
-
- return 1;
-}
/* Find a PCI capability */
-static __u32 __init find_cap(int num, int slot, int func, int cap)
+static u32 __init find_cap(int bus, int slot, int func, int cap)
{
int bytes;
u8 pos;
- if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+ if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) &
PCI_STATUS_CAP_LIST))
return 0;
- pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+ pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST);
for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
u8 id;
pos &= ~3;
- id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
+ id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID);
if (id == 0xff)
break;
if (id == cap)
return pos;
- pos = read_pci_config_byte(num, slot, func,
+ pos = read_pci_config_byte(bus, slot, func,
pos+PCI_CAP_LIST_NEXT);
}
return 0;
}
/* Read a standard AGPv3 bridge header */
-static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
+static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order)
{
u32 apsize;
u32 apsizereg;
int nbits;
u32 aper_low, aper_hi;
u64 aper;
+ u32 old_order;
- printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func);
- apsizereg = read_pci_config_16(num, slot, func, cap + 0x14);
+ printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func);
+ apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14);
if (apsizereg == 0xffffffff) {
printk(KERN_ERR "APSIZE in AGP bridge unreadable\n");
return 0;
}
+ /* old_order could be the value from NB gart setting */
+ old_order = *order;
+
apsize = apsizereg & 0xfff;
/* Some BIOS use weird encodings not in the AGPv3 table. */
if (apsize & 0xff)
@@ -155,14 +165,26 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
if ((int)*order < 0) /* < 32MB */
*order = 0;
- aper_low = read_pci_config(num, slot, func, 0x10);
- aper_hi = read_pci_config(num, slot, func, 0x14);
+ aper_low = read_pci_config(bus, slot, func, 0x10);
+ aper_hi = read_pci_config(bus, slot, func, 0x14);
aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32);
+ /*
+ * On some sick chips, APSIZE is 0. It means it wants 4G
+ * so let double check that order, and lets trust AMD NB settings:
+ */
+ printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n",
+ aper, 32 << old_order);
+ if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) {
+ printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n",
+ 32 << *order, apsizereg);
+ *order = old_order;
+ }
+
printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n",
aper, 32 << *order, apsizereg);
- if (!aperture_valid(aper, (32*1024*1024) << *order))
+ if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20))
return 0;
return (u32)aper;
}
@@ -180,17 +202,17 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
* the AGP bridges should be always an own bus on the HT hierarchy,
* but do it here for future safety.
*/
-static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
+static u32 __init search_agp_bridge(u32 *order, int *valid_agp)
{
- int num, slot, func;
+ int bus, slot, func;
/* Poor man's PCI discovery */
- for (num = 0; num < 256; num++) {
+ for (bus = 0; bus < 256; bus++) {
for (slot = 0; slot < 32; slot++) {
for (func = 0; func < 8; func++) {
u32 class, cap;
u8 type;
- class = read_pci_config(num, slot, func,
+ class = read_pci_config(bus, slot, func,
PCI_CLASS_REVISION);
if (class == 0xffffffff)
break;
@@ -199,17 +221,17 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
case PCI_CLASS_BRIDGE_HOST:
case PCI_CLASS_BRIDGE_OTHER: /* needed? */
/* AGP bridge? */
- cap = find_cap(num, slot, func,
+ cap = find_cap(bus, slot, func,
PCI_CAP_ID_AGP);
if (!cap)
break;
*valid_agp = 1;
- return read_agp(num, slot, func, cap,
+ return read_agp(bus, slot, func, cap,
order);
}
/* No multi-function device? */
- type = read_pci_config_byte(num, slot, func,
+ type = read_pci_config_byte(bus, slot, func,
PCI_HEADER_TYPE);
if (!(type & 0x80))
break;
@@ -249,36 +271,50 @@ void __init early_gart_iommu_check(void)
* or BIOS forget to put that in reserved.
* try to update e820 to make that region as reserved.
*/
- int fix, num;
+ int i, fix, slot;
u32 ctl;
u32 aper_size = 0, aper_order = 0, last_aper_order = 0;
u64 aper_base = 0, last_aper_base = 0;
- int aper_enabled = 0, last_aper_enabled = 0;
+ int aper_enabled = 0, last_aper_enabled = 0, last_valid = 0;
if (!early_pci_allowed())
return;
+ /* This is mostly duplicate of iommu_hole_init */
fix = 0;
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
-
- ctl = read_pci_config(0, num, 3, 0x90);
- aper_enabled = ctl & 1;
- aper_order = (ctl >> 1) & 7;
- aper_size = (32 * 1024 * 1024) << aper_order;
- aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
- aper_base <<= 25;
-
- if ((last_aper_order && aper_order != last_aper_order) ||
- (last_aper_base && aper_base != last_aper_base) ||
- (last_aper_enabled && aper_enabled != last_aper_enabled)) {
- fix = 1;
- break;
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
+
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
+
+ ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
+ aper_enabled = ctl & AMD64_GARTEN;
+ aper_order = (ctl >> 1) & 7;
+ aper_size = (32 * 1024 * 1024) << aper_order;
+ aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
+ aper_base <<= 25;
+
+ if (last_valid) {
+ if ((aper_order != last_aper_order) ||
+ (aper_base != last_aper_base) ||
+ (aper_enabled != last_aper_enabled)) {
+ fix = 1;
+ break;
+ }
+ }
+
+ last_aper_order = aper_order;
+ last_aper_base = aper_base;
+ last_aper_enabled = aper_enabled;
+ last_valid = 1;
}
- last_aper_order = aper_order;
- last_aper_base = aper_base;
- last_aper_enabled = aper_enabled;
}
if (!fix && !aper_enabled)
@@ -290,32 +326,46 @@ void __init early_gart_iommu_check(void)
if (gart_fix_e820 && !fix && aper_enabled) {
if (e820_any_mapped(aper_base, aper_base + aper_size,
E820_RAM)) {
- /* reserved it, so we can resuse it in second kernel */
+ /* reserve it, so we can reuse it in second kernel */
printk(KERN_INFO "update e820 for GART\n");
add_memory_region(aper_base, aper_size, E820_RESERVED);
update_e820();
}
- return;
}
+ if (!fix)
+ return;
+
/* different nodes have different setting, disable them all at first*/
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
+
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
- ctl = read_pci_config(0, num, 3, 0x90);
- ctl &= ~1;
- write_pci_config(0, num, 3, 0x90, ctl);
+ ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
+ ctl &= ~AMD64_GARTEN;
+ write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl);
+ }
}
}
+static int __initdata printed_gart_size_msg;
+
void __init gart_iommu_hole_init(void)
{
+ u32 agp_aper_base = 0, agp_aper_order = 0;
u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
u64 aper_base, last_aper_base = 0;
- int fix, num, valid_agp = 0;
- int node;
+ int fix, slot, valid_agp = 0;
+ int i, node;
if (gart_iommu_aperture_disabled || !fix_aperture ||
!early_pci_allowed())
@@ -323,38 +373,63 @@ void __init gart_iommu_hole_init(void)
printk(KERN_INFO "Checking aperture...\n");
+ if (!fallback_aper_force)
+ agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp);
+
fix = 0;
node = 0;
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
-
- iommu_detected = 1;
- gart_iommu_aperture = 1;
-
- aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7;
- aper_size = (32 * 1024 * 1024) << aper_order;
- aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
- aper_base <<= 25;
-
- printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n",
- node, aper_base, aper_size >> 20);
- node++;
-
- if (!aperture_valid(aper_base, aper_size)) {
- fix = 1;
- break;
- }
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
+
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
+
+ iommu_detected = 1;
+ gart_iommu_aperture = 1;
+
+ aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7;
+ aper_size = (32 * 1024 * 1024) << aper_order;
+ aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
+ aper_base <<= 25;
+
+ printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n",
+ node, aper_base, aper_size >> 20);
+ node++;
+
+ if (!aperture_valid(aper_base, aper_size, 64<<20)) {
+ if (valid_agp && agp_aper_base &&
+ agp_aper_base == aper_base &&
+ agp_aper_order == aper_order) {
+ /* the same between two setting from NB and agp */
+ if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) {
+ printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n");
+ printk(KERN_ERR "please increase GART size in your BIOS setup\n");
+ printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n");
+ printed_gart_size_msg = 1;
+ }
+ } else {
+ fix = 1;
+ goto out;
+ }
+ }
- if ((last_aper_order && aper_order != last_aper_order) ||
- (last_aper_base && aper_base != last_aper_base)) {
- fix = 1;
- break;
+ if ((last_aper_order && aper_order != last_aper_order) ||
+ (last_aper_base && aper_base != last_aper_base)) {
+ fix = 1;
+ goto out;
+ }
+ last_aper_order = aper_order;
+ last_aper_base = aper_base;
}
- last_aper_order = aper_order;
- last_aper_base = aper_base;
}
+out:
if (!fix && !fallback_aper_force) {
if (last_aper_base) {
unsigned long n = (32 * 1024 * 1024) << last_aper_order;
@@ -364,8 +439,10 @@ void __init gart_iommu_hole_init(void)
return;
}
- if (!fallback_aper_force)
- aper_alloc = search_agp_bridge(&aper_order, &valid_agp);
+ if (!fallback_aper_force) {
+ aper_alloc = agp_aper_base;
+ aper_order = agp_aper_order;
+ }
if (aper_alloc) {
/* Got the aperture from the AGP bridge */
@@ -401,16 +478,24 @@ void __init gart_iommu_hole_init(void)
}
/* Fix up the north bridges */
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
-
- /*
- * Don't enable translation yet. That is done later.
- * Assume this BIOS didn't initialise the GART so
- * just overwrite all previous bits
- */
- write_pci_config(0, num, 3, 0x90, aper_order<<1);
- write_pci_config(0, num, 3, 0x94, aper_alloc>>25);
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
+
+ /* Don't enable translation yet. That is done later.
+ Assume this BIOS didn't initialise the GART so
+ just overwrite all previous bits */
+ write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1);
+ write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25);
+ }
}
+
+ set_up_gart_resume(aper_order, aper_alloc);
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 03:21:42 +0000