diff options
Diffstat (limited to 'arch/sh/drivers')
| -rw-r--r-- | arch/sh/drivers/dma/Kconfig | 2 | ||||
| -rw-r--r-- | arch/sh/drivers/dma/dma-sh.c | 2 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/Makefile | 7 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/dma-dreamcast.c | 70 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/fixups-dreamcast.c | 10 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/fixups-sdk7780.c | 59 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/ops-cayman.c | 94 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/ops-r7780rp.c | 16 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/ops-sdk7780.c | 73 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/ops-sh5.c | 93 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci-auto.c | 2 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci-sh4.h | 4 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci-sh5.c | 228 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci-sh5.h | 113 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci-sh7780.c | 1 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci-sh7780.h | 1 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci.c | 2 |
17 files changed, 686 insertions, 91 deletions
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index 4e711a0c3dae..01936368b8b0 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -12,7 +12,7 @@ config SH_DMA config NR_ONCHIP_DMA_CHANNELS int depends on SH_DMA - default "6" if CPU_SUBTYPE_SH7720 + default "6" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721 default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R default "12" if CPU_SUBTYPE_SH7780 default "4" diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 958bac1c585a..5c3359756a92 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -25,6 +25,7 @@ static int dmte_irq_map[] = { DMTE2_IRQ, DMTE3_IRQ, #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ defined(CONFIG_CPU_SUBTYPE_SH7760) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) || \ @@ -203,6 +204,7 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan) } #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) #define dmaor_read_reg() ctrl_inw(DMAOR) #define dmaor_write_reg(data) ctrl_outw(data, DMAOR) diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index fba6b5ba0b3a..0718805774e8 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -7,16 +7,19 @@ obj-$(CONFIG_PCI_AUTO) += pci-auto.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o +obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o +obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o -obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ - dma-dreamcast.o +obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o obj-$(CONFIG_SH_HIGHLANDER) += ops-r7780rp.o fixups-r7780rp.o +obj-$(CONFIG_SH_SDK7780) += ops-sdk7780.o fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o +obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o diff --git a/arch/sh/drivers/pci/dma-dreamcast.c b/arch/sh/drivers/pci/dma-dreamcast.c deleted file mode 100644 index 888a34050599..000000000000 --- a/arch/sh/drivers/pci/dma-dreamcast.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/sh/drivers/pci/dma-dreamcast.c - * - * PCI DMA support for the Sega Dreamcast - * - * Copyright (C) 2001, 2002 M. R. Brown - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file originally bore the message (with enclosed-$): - * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp - * Dreamcast PCI: Supports SEGA Broadband Adaptor only. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/device.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> - -static int gapspci_dma_used = 0; - -void *dreamcast_consistent_alloc(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - unsigned long buf; - - if (dev && dev->bus != &pci_bus_type) - return NULL; - - if (gapspci_dma_used + size > GAPSPCI_DMA_SIZE) - return ERR_PTR(-EINVAL); - - buf = GAPSPCI_DMA_BASE + gapspci_dma_used; - - gapspci_dma_used = PAGE_ALIGN(gapspci_dma_used+size); - - *dma_handle = (dma_addr_t)buf; - - buf = P2SEGADDR(buf); - - /* Flush the dcache before we hand off the buffer */ - __flush_purge_region((void *)buf, size); - - return (void *)buf; -} - -int dreamcast_consistent_free(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - if (dev && dev->bus != &pci_bus_type) - return -EINVAL; - - /* XXX */ - gapspci_dma_used = 0; - - return 0; -} - diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index 6f53f8200dc3..c44699301eeb 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -22,6 +22,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/pci.h> +#include <linux/dma-mapping.h> #include <asm/io.h> #include <asm/irq.h> @@ -40,6 +41,15 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev) */ dev->resource[1].start = p->io_resource->start + 0x100; dev->resource[1].end = dev->resource[1].start + 0x200 - 1; + /* + * Redirect dma memory allocations to special memory window. + */ + BUG_ON(!dma_declare_coherent_memory(&dev->dev, + GAPSPCI_DMA_BASE, + GAPSPCI_DMA_BASE, + GAPSPCI_DMA_SIZE, + DMA_MEMORY_MAP | + DMA_MEMORY_EXCLUSIVE)); break; default: printk("PCI: Failed resource fixup\n"); diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c new file mode 100644 index 000000000000..2f8863099dd1 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -0,0 +1,59 @@ +/* + * arch/sh/drivers/pci/fixups-sdk7780.c + * + * PCI fixups for the SDK7780SE03 + * + * Copyright (C) 2003 Lineo uSolutions, Inc. + * Copyright (C) 2004 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/pci.h> +#include "pci-sh4.h" +#include <asm/io.h> + +int pci_fixup_pcic(void) +{ + ctrl_outl(0x00000001, SH7780_PCI_VCR2); + + /* Enable all interrupts, so we know what to fix */ + pci_write_reg(0x0000C3FF, SH7780_PCIIMR); + pci_write_reg(0x0000380F, SH7780_PCIAINTM); + + /* Set up standard PCI config registers */ + pci_write_reg(0xFB00, SH7780_PCISTATUS); + pci_write_reg(0x0047, SH7780_PCICMD); + pci_write_reg(0x00, SH7780_PCIPIF); + pci_write_reg(0x00, SH7780_PCISUB); + pci_write_reg(0x06, SH7780_PCIBCC); + pci_write_reg(0x1912, SH7780_PCISVID); + pci_write_reg(0x0001, SH7780_PCISID); + + pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */ + pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */ + pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ + + pci_write_reg(0x00000000, SH7780_PCIMBAR1); + pci_write_reg(0x00000000, SH7780_PCILAR1); + pci_write_reg(0x00000000, SH7780_PCILSR1); + + pci_write_reg(0xAB000801, SH7780_PCIIBAR); + + /* + * Set the MBR so PCI address is one-to-one with window, + * meaning all calls go straight through... use ifdef to + * catch erroneous assumption. + */ + pci_write_reg(0xFD000000 , SH7780_PCIMBR0); + pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ + + /* Set IOBR for window containing area specified in pci.h */ + pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); + pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); + + pci_write_reg(0xA5000C01, SH7780_PCICR); + + return 0; +} diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c new file mode 100644 index 000000000000..980275ffa30b --- /dev/null +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -0,0 +1,94 @@ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/types.h> +#include <asm/cpu/irq.h> +#include "pci-sh5.h" + +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int result = -1; + + /* The complication here is that the PCI IRQ lines from the Cayman's 2 + 5V slots get into the CPU via a different path from the IRQ lines + from the 3 3.3V slots. Thus, we have to detect whether the card's + interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' + at the point where we cross from 5V to 3.3V is not the normal case. + + The added complication is that we don't know that the 5V slots are + always bus 2, because a card containing a PCI-PCI bridge may be + plugged into a 3.3V slot, and this changes the bus numbering. + + Also, the Cayman has an intermediate PCI bus that goes a custom + expansion board header (and to the secondary bridge). This bus has + never been used in practice. + + The 1ary onboard PCI-PCI bridge is device 3 on bus 0 + The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of + the 1ary bridge. + */ + + struct slot_pin { + int slot; + int pin; + } path[4]; + int i=0; + + while (dev->bus->number > 0) { + + slot = path[i].slot = PCI_SLOT(dev->devfn); + pin = path[i].pin = bridge_swizzle(pin, slot); + dev = dev->bus->self; + i++; + if (i > 3) panic("PCI path to root bus too long!\n"); + } + + slot = PCI_SLOT(dev->devfn); + /* This is the slot on bus 0 through which the device is eventually + reachable. */ + + /* Now work back up. */ + if ((slot < 3) || (i == 0)) { + /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final + swizzle now. */ + result = IRQ_INTA + bridge_swizzle(pin, slot) - 1; + } else { + i--; + slot = path[i].slot; + pin = path[i].pin; + if (slot > 0) { + panic("PCI expansion bus device found - not handled!\n"); + } else { + if (i > 0) { + /* 5V slots */ + i--; + slot = path[i].slot; + pin = path[i].pin; + /* 'pin' was swizzled earlier wrt slot, don't do it again. */ + result = IRQ_P2INTA + (pin - 1); + } else { + /* IRQ for 2ary PCI-PCI bridge : unused */ + result = -1; + } + } + } + + return result; +} + +struct pci_channel board_pci_channels[] = { + { &sh5_pci_ops, NULL, NULL, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +int __init pcibios_init_platform(void) +{ + return sh5pci_init(__pa(memory_start), + __pa(memory_end) - __pa(memory_start)); +} diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 48fe4032ebea..5fdadaeed6fc 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -17,25 +17,13 @@ #include <asm/io.h> #include "pci-sh4.h" -static char r7780rp_irq_tab[] __initdata = { - 0, 1, 2, 3, -}; - -static char r7780mp_irq_tab[] __initdata = { +static char irq_tab[] __initdata = { 65, 66, 67, 68, }; int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { - if (mach_is_r7780rp()) - return r7780rp_irq_tab[slot]; - if (mach_is_r7780mp() || mach_is_r7785rp()) - return r7780mp_irq_tab[slot]; - - printk(KERN_ERR "PCI: Bad IRQ mapping " - "request for slot %d, func %d\n", slot, pin-1); - - return -1; + return irq_tab[slot]; } static struct resource sh7780_io_resource = { diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c new file mode 100644 index 000000000000..66a9b4047f26 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -0,0 +1,73 @@ +/* + * linux/arch/sh/drivers/pci/ops-sdk7780.c + * + * Copyright (C) 2006 Nobuhiro Iwamatsu + * + * PCI initialization for the SDK7780SE03 + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <asm/sdk7780.h> +#include <asm/io.h> +#include "pci-sh4.h" + +/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */ +static char sdk7780_irq_tab[4][16] __initdata = { + /* INTA */ + { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTB */ + { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTC */ + { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTD */ + { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return sdk7780_irq_tab[pin-1][slot]; +} + +static struct resource sdk7780_io_resource = { + .name = "SH7780_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sdk7780_mem_resource = { + .name = "SH7780_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + { &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +static struct sh4_pci_address_map sdk7780_pci_map = { + .window0 = { + .base = SH7780_CS2_BASE_ADDR, + .size = 0x04000000, + }, + .window1 = { + .base = SH7780_CS3_BASE_ADDR, + .size = 0x04000000, + }, + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n"); + return sh7780_pcic_init(&sdk7780_pci_map); +} diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c new file mode 100644 index 000000000000..729e38a6fe07 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh5.c @@ -0,0 +1,93 @@ +/* + * Support functions for the SH5 PCI hardware. + * + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include <linux/kernel.h> +#include <linux/rwsem.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/irq.h> +#include <asm/pci.h> +#include <asm/io.h> +#include "pci-sh5.h" + +static void __init pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + printk("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i=0; i<4; i++) { + struct resource *r = &d->resource[i]; + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +char * __devinit pcibios_setup(char *str) +{ + return str; +} + +static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); + + switch (size) { + case 1: + *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3)); + break; + case 2: + *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2)); + break; + case 4: + *val = SH5PCI_READ(PDR); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); + + switch (size) { + case 1: + SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); + break; + case 2: + SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); + break; + case 4: + SH5PCI_WRITE(PDR, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops sh5_pci_ops = { + .read = sh5pci_read, + .write = sh5pci_write, +}; diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c index 224e007736fb..ea404704ace8 100644 --- a/arch/sh/drivers/pci/pci-auto.c +++ b/arch/sh/drivers/pci/pci-auto.c @@ -516,10 +516,8 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) PCI_COMMAND, cmdstat | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); -#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) early_write_config_byte(hose, top_bus, current_bus, pci_devfn, PCI_LATENCY_TIMER, 0x80); -#endif /* Allocate PCI I/O and/or memory space */ pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5); diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index 1901c33cde6a..4925c79ea959 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -1,7 +1,9 @@ #ifndef __PCI_SH4_H #define __PCI_SH4_H -#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) +#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7763) #include "pci-sh7780.h" #else #include "pci-sh7751.h" diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c new file mode 100644 index 000000000000..a00a4df8c02d --- /dev/null +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -0,0 +1,228 @@ +/* + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Support functions for the SH5 PCI hardware. + */ + +#include <linux/kernel.h> +#include <linux/rwsem.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/irq.h> +#include <asm/cpu/irq.h> +#include <asm/pci.h> +#include <asm/io.h> +#include "pci-sh5.h" + +unsigned long pcicr_virt; +unsigned long PCI_IO_AREA; + +/* Rounds a number UP to the nearest power of two. Used for + * sizing the PCI window. + */ +static u32 __init r2p2(u32 num) +{ + int i = 31; + u32 tmp = num; + + if (num == 0) + return 0; + + do { + if (tmp & (1 << 31)) + break; + i--; + tmp <<= 1; + } while (i >= 0); + + tmp = 1 << i; + /* If the original number isn't a power of 2, round it up */ + if (tmp != num) + tmp <<= 1; + + return tmp; +} + +static irqreturn_t pcish5_err_irq(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + unsigned pci_int, pci_air, pci_cir, pci_aint; + + pci_int = SH5PCI_READ(INT); + pci_cir = SH5PCI_READ(CIR); + pci_air = SH5PCI_READ(AIR); + + if (pci_int) { + printk("PCI INTERRUPT (at %08llx)!\n", regs->pc); + printk("PCI INT -> 0x%x\n", pci_int & 0xffff); + printk("PCI AIR -> 0x%x\n", pci_air); + printk("PCI CIR -> 0x%x\n", pci_cir); + SH5PCI_WRITE(INT, ~0); + } + + pci_aint = SH5PCI_READ(AINT); + if (pci_aint) { + printk("PCI ARB INTERRUPT!\n"); + printk("PCI AINT -> 0x%x\n", pci_aint); + printk("PCI AIR -> 0x%x\n", pci_air); + printk("PCI CIR -> 0x%x\n", pci_cir); + SH5PCI_WRITE(AINT, ~0); + } + + return IRQ_HANDLED; +} + +static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) +{ + printk("SERR IRQ\n"); + + return IRQ_NONE; +} + +int __init sh5pci_init(unsigned long memStart, unsigned long memSize) +{ + u32 lsr0; + u32 uval; + + if (request_irq(IRQ_ERR, pcish5_err_irq, + IRQF_DISABLED, "PCI Error",NULL) < 0) { + printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n"); + return -EINVAL; + } + + if (request_irq(IRQ_SERR, pcish5_serr_irq, + IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) { + printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n"); + return -EINVAL; + } + + pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR"); + if (!pcicr_virt) { + panic("Unable to remap PCICR\n"); + } + + PCI_IO_AREA = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO"); + if (!PCI_IO_AREA) { + panic("Unable to remap PCIIO\n"); + } + + /* Clear snoop registers */ + SH5PCI_WRITE(CSCR0, 0); + SH5PCI_WRITE(CSCR1, 0); + + /* Switch off interrupts */ + SH5PCI_WRITE(INTM, 0); + SH5PCI_WRITE(AINTM, 0); + SH5PCI_WRITE(PINTM, 0); + + /* Set bus active, take it out of reset */ + uval = SH5PCI_READ(CR); + + /* Set command Register */ + SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | + CR_PFCS | CR_BMAM); + + uval=SH5PCI_READ(CR); + + /* Allow it to be a master */ + /* NB - WE DISABLE I/O ACCESS to stop overlap */ + /* set WAIT bit to enable stepping, an attempt to improve stability */ + SH5PCI_WRITE_SHORT(CSR_CMD, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_WAIT); + + /* + ** Set translation mapping memory in order to convert the address + ** used for the main bus, to the PCI internal address. + */ + SH5PCI_WRITE(MBR,0x40000000); + + /* Always set the max size 512M */ + SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024)); + + /* + ** I/O addresses are mapped at internal PCI specific address + ** as is described into the configuration bridge table. + ** These are changed to 0, to allow cards that have legacy + ** io such as vga to function correctly. We set the SH5 IOBAR to + ** 256K, which is a bit big as we can only have 64K of address space + */ + + SH5PCI_WRITE(IOBR,0x0); + + /* Set up a 256K window. Totally pointless waste of address space */ + SH5PCI_WRITE(IOBMR,0); + + /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. + * Ideally, we would want to map the I/O region somewhere, but it + * is so big this is not that easy! + */ + SH5PCI_WRITE(CSR_IBAR0,~0); + /* Set memory size value */ + memSize = memory_end - memory_start; + + /* Now we set up the mbars so the PCI bus can see the memory of + * the machine */ + if (memSize < (1024 * 1024)) { + printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n", + memSize); + return -EINVAL; + } + + /* Set LSR 0 */ + lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : + ((r2p2(memSize) - 0x100000) | 0x1); + SH5PCI_WRITE(LSR0, lsr0); + + /* Set MBAR 0 */ + SH5PCI_WRITE(CSR_MBAR0, memory_start); + SH5PCI_WRITE(LAR0, memory_start); + + SH5PCI_WRITE(CSR_MBAR1,0); + SH5PCI_WRITE(LAR1,0); + SH5PCI_WRITE(LSR1,0); + + /* Enable the PCI interrupts on the device */ + SH5PCI_WRITE(INTM, ~0); + SH5PCI_WRITE(AINTM, ~0); + SH5PCI_WRITE(PINTM, ~0); + + return 0; +} + +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + int i; + + if (dev) { + for (i= 0; i < 3; i++) { + bus->resource[i] = + &dev->resource[PCI_BRIDGE_RESOURCES+i]; + bus->resource[i]->name = bus->name; + } + bus->resource[0]->flags |= IORESOURCE_IO; + bus->resource[1]->flags |= IORESOURCE_MEM; + + /* For now, propagate host limits to the bus; + * we'll adjust them later. */ + bus->resource[0]->end = 64*1024 - 1 ; + bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1; + bus->resource[0]->start = PCIBIOS_MIN_IO; + bus->resource[1]->start = PCIBIOS_MIN_MEM; + + /* Turn off downstream PF memory address range by default */ + bus->resource[2]->start = 1024*1024; + bus->resource[2]->end = bus->resource[2]->start - 1; + } +} diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h new file mode 100644 index 000000000000..7cff3fc04d30 --- /dev/null +++ b/arch/sh/drivers/pci/pci-sh5.h @@ -0,0 +1,113 @@ +/* + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Definitions for the SH5 PCI hardware. + */ +#ifndef __PCI_SH5_H +#define __PCI_SH5_H + +/* Product ID */ +#define PCISH5_PID 0x350d + +/* vendor ID */ +#define PCISH5_VID 0x1054 + +/* Configuration types */ +#define ST_TYPE0 0x00 /* Configuration cycle type 0 */ +#define ST_TYPE1 0x01 /* Configuration cycle type 1 */ + +/* VCR data */ +#define PCISH5_VCR_STATUS 0x00 +#define PCISH5_VCR_VERSION 0x08 + +/* +** ICR register offsets and bits +*/ +#define PCISH5_ICR_CR 0x100 /* PCI control register values */ +#define CR_PBAM (1<<12) +#define CR_PFCS (1<<11) +#define CR_FTO (1<<10) +#define CR_PFE (1<<9) +#define CR_TBS (1<<8) +#define CR_SPUE (1<<7) +#define CR_BMAM (1<<6) +#define CR_HOST (1<<5) +#define CR_CLKEN (1<<4) +#define CR_SOCS (1<<3) +#define CR_IOCS (1<<2) +#define CR_RSTCTL (1<<1) +#define CR_CFINT (1<<0) +#define CR_LOCK_MASK 0xa5000000 + +#define PCISH5_ICR_INT 0x114 /* Interrupt registert values */ +#define INT_MADIM (1<<2) + +#define PCISH5_ICR_LSR0 0X104 /* Local space register values */ +#define PCISH5_ICR_LSR1 0X108 /* Local space register values */ +#define PCISH5_ICR_LAR0 0x10c /* Local address register values */ +#define PCISH5_ICR_LAR1 0x110 /* Local address register values */ +#define PCISH5_ICR_INTM 0x118 /* Interrupt mask register values */ +#define PCISH5_ICR_AIR 0x11c /* Interrupt error address information register values */ +#define PCISH5_ICR_CIR 0x120 /* Interrupt error command information register values */ +#define PCISH5_ICR_AINT 0x130 /* Interrupt error arbiter interrupt register values */ +#define PCISH5_ICR_AINTM 0x134 /* Interrupt error arbiter interrupt mask register values */ +#define PCISH5_ICR_BMIR 0x138 /* Interrupt error info register of bus master values */ +#define PCISH5_ICR_PAR 0x1c0 /* Pio address register values */ +#define PCISH5_ICR_MBR 0x1c4 /* Memory space bank register values */ +#define PCISH5_ICR_IOBR 0x1c8 /* I/O space bank register values */ +#define PCISH5_ICR_PINT 0x1cc /* power management interrupt register values */ +#define PCISH5_ICR_PINTM 0x1d0 /* power management interrupt mask register values */ +#define PCISH5_ICR_MBMR 0x1d8 /* memory space bank mask register values */ +#define PCISH5_ICR_IOBMR 0x1dc /* I/O space bank mask register values */ +#define PCISH5_ICR_CSCR0 0x210 /* PCI cache snoop control register 0 */ +#define PCISH5_ICR_CSCR1 0x214 /* PCI cache snoop control register 1 */ +#define PCISH5_ICR_PDR 0x220 /* Pio data register values */ + +/* These are configs space registers */ +#define PCISH5_ICR_CSR_VID 0x000 /* Vendor id */ +#define PCISH5_ICR_CSR_DID 0x002 /* Device id */ +#define PCISH5_ICR_CSR_CMD 0x004 /* Command register */ +#define PCISH5_ICR_CSR_STATUS 0x006 /* Stautus */ +#define PCISH5_ICR_CSR_IBAR0 0x010 /* I/O base address register */ +#define PCISH5_ICR_CSR_MBAR0 0x014 /* First Memory base address register */ +#define PCISH5_ICR_CSR_MBAR1 0x018 /* Second Memory base address register */ + +/* Base address of registers */ +#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000) +#define SH5PCI_IO_BASE (PHYS_PCI_BLOCK + 0x00800000) +/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG) */ + +extern unsigned long pcicr_virt; +/* Register selection macro */ +#define PCISH5_ICR_REG(x) ( pcicr_virt + (PCISH5_ICR_##x)) +/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */ + +/* Write I/O functions */ +#define SH5PCI_WRITE(reg,val) ctrl_outl((u32)(val),PCISH5_ICR_REG(reg)) +#define SH5PCI_WRITE_SHORT(reg,val) ctrl_outw((u16)(val),PCISH5_ICR_REG(reg)) +#define SH5PCI_WRITE_BYTE(reg,val) ctrl_outb((u8)(val),PCISH5_ICR_REG(reg)) + +/* Read I/O functions */ +#define SH5PCI_READ(reg) ctrl_inl(PCISH5_ICR_REG(reg)) +#define SH5PCI_READ_SHORT(reg) ctrl_inw(PCISH5_ICR_REG(reg)) +#define SH5PCI_READ_BYTE(reg) ctrl_inb(PCISH5_ICR_REG(reg)) + +/* Set PCI config bits */ +#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000) + +/* Set PCI command register */ +#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where) + +/* Size converters */ +#define PCISH5_MEM_SIZCONV(x) (((x / 0x40000) - 1) << 18) +#define PCISH5_IO_SIZCONV(x) (((x / 0x40000) - 1) << 18) + +extern struct pci_ops sh5_pci_ops; + +/* arch/sh/drivers/pci/pci-sh5.c */ +int sh5pci_init(unsigned long memStart, unsigned long memSize); + +#endif /* __PCI_SH5_H */ diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index e516087fb435..7d797f4de5e7 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -58,6 +58,7 @@ static int __init sh7780_pci_init(void) id = pci_read_reg(SH7780_PCIVID); if ((id & 0xffff) == SH7780_VENDOR_ID) { switch ((id >> 16) & 0xffff) { + case SH7763_DEVICE_ID: case SH7780_DEVICE_ID: case SH7781_DEVICE_ID: case SH7785_DEVICE_ID: diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 1d069a859de2..97b2c98f05c4 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -16,6 +16,7 @@ #define SH7780_VENDOR_ID 0x1912 #define SH7781_DEVICE_ID 0x0001 #define SH7780_DEVICE_ID 0x0002 +#define SH7763_DEVICE_ID 0x0004 #define SH7785_DEVICE_ID 0x0007 /* SH7780 Control Registers */ diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index ccaba368ac9b..49b435c3a57a 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -71,7 +71,7 @@ subsys_initcall(pcibios_init); * Called after each bus is probed, but before its children * are examined. */ -void __devinit pcibios_fixup_bus(struct pci_bus *bus) +void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) { pci_read_bridge_bases(bus); } |