summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms')
-rw-r--r--arch/powerpc/platforms/44x/currituck.c2
-rw-r--r--arch/powerpc/platforms/82xx/km82xx.c5
-rw-r--r--arch/powerpc/platforms/83xx/km83xx.c100
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig43
-rw-r--r--arch/powerpc/platforms/85xx/Makefile4
-rw-r--r--arch/powerpc/platforms/85xx/bsc913x_rdb.c67
-rw-r--r--arch/powerpc/platforms/85xx/corenet_ds.c2
-rw-r--r--arch/powerpc/platforms/85xx/ge_imp3a.c2
-rw-r--r--arch/powerpc/platforms/85xx/mpc8536_ds.c2
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ds.c97
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c2
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_rdb.c22
-rw-r--r--arch/powerpc/platforms/85xx/p1022_ds.c116
-rw-r--r--arch/powerpc/platforms/85xx/p3060_qds.c77
-rw-r--r--arch/powerpc/platforms/85xx/qemu_e500.c72
-rw-r--r--arch/powerpc/platforms/85xx/sbc8560.c254
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_hpcn.c2
-rw-r--r--arch/powerpc/platforms/Kconfig.cputype4
-rw-r--r--arch/powerpc/platforms/cell/beat_hvCall.S28
-rw-r--r--arch/powerpc/platforms/cell/iommu.c1
-rw-r--r--arch/powerpc/platforms/powernv/opal-takeover.S10
-rw-r--r--arch/powerpc/platforms/pseries/eeh_event.c6
-rw-r--r--arch/powerpc/platforms/pseries/eeh_pseries.c4
-rw-r--r--arch/powerpc/platforms/pseries/hvCall.S78
-rw-r--r--arch/powerpc/platforms/pseries/iommu.c113
-rw-r--r--arch/powerpc/platforms/pseries/mobility.c8
-rw-r--r--arch/powerpc/platforms/pseries/processor_idle.c36
-rw-r--r--arch/powerpc/platforms/pseries/reconfig.c16
-rw-r--r--arch/powerpc/platforms/pseries/smp.c1
29 files changed, 591 insertions, 583 deletions
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c
index 583e67fee37e..9f6c33d63a42 100644
--- a/arch/powerpc/platforms/44x/currituck.c
+++ b/arch/powerpc/platforms/44x/currituck.c
@@ -160,7 +160,7 @@ static void __init ppc47x_setup_arch(void)
/* No need to check the DMA config as we /know/ our windows are all of
* RAM. Lets hope that doesn't change */
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > 0xffffffff) {
+ if ((memblock_end_of_DRAM() - 1) > 0xffffffff) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/82xx/km82xx.c b/arch/powerpc/platforms/82xx/km82xx.c
index 3661bcdc326a..cf964e19573a 100644
--- a/arch/powerpc/platforms/82xx/km82xx.c
+++ b/arch/powerpc/platforms/82xx/km82xx.c
@@ -128,6 +128,11 @@ static __initdata struct cpm_pin km82xx_pins[] = {
{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXP */
{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXN */
{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXD */
+
+ /* SPI */
+ {3, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MISO PD16 */
+ {3, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MOSI PD17 */
+ {3, 18, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_CLK PD18 */
};
static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index a266ba876863..89923d723349 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -3,7 +3,7 @@
* Author: Heiko Schocher <hs@denx.de>
*
* Description:
- * Keymile KMETER1 board specific routines.
+ * Keymile 83xx platform specific routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -70,54 +70,88 @@ static void __init mpc83xx_km_setup_arch(void)
for_each_node_by_name(np, "spi")
par_io_of_config(np);
- for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+ for_each_node_by_name(np, "ucc")
par_io_of_config(np);
}
np = of_find_compatible_node(NULL, "network", "ucc_geth");
if (np != NULL) {
- uint svid;
+ /*
+ * handle mpc8360E Erratum QE_ENET10:
+ * RGMII AC values do not meet the specification
+ */
+ uint svid = mfspr(SPRN_SVR);
+ struct device_node *np_par;
+ struct resource res;
+ void __iomem *base;
+ int ret;
+
+ np_par = of_find_node_by_name(NULL, "par_io");
+ if (np_par == NULL) {
+ printk(KERN_WARNING "%s couldn;t find par_io node\n",
+ __func__);
+ return;
+ }
+ /* Map Parallel I/O ports registers */
+ ret = of_address_to_resource(np_par, 0, &res);
+ if (ret) {
+ printk(KERN_WARNING "%s couldn;t map par_io registers\n",
+ __func__);
+ return;
+ }
+
+ base = ioremap(res.start, res.end - res.start + 1);
+
+ /*
+ * set output delay adjustments to default values according
+ * table 5 in Errata Rev. 5, 9/2011:
+ *
+ * write 0b01 to UCC1 bits 18:19
+ * write 0b01 to UCC2 option 1 bits 4:5
+ * write 0b01 to UCC2 option 2 bits 16:17
+ */
+ clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000);
+
+ /*
+ * set output delay adjustments to default values according
+ * table 3-13 in Reference Manual Rev.3 05/2010:
+ *
+ * write 0b01 to UCC2 option 2 bits 16:17
+ * write 0b0101 to UCC1 bits 20:23
+ * write 0b0101 to UCC2 option 1 bits 24:27
+ */
+ clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550);
- /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
- svid = mfspr(SPRN_SVR);
if (SVR_REV(svid) == 0x0021) {
- struct device_node *np_par;
- struct resource res;
- void __iomem *base;
- int ret;
-
- np_par = of_find_node_by_name(NULL, "par_io");
- if (np_par == NULL) {
- printk(KERN_WARNING "%s couldn;t find par_io node\n",
- __func__);
- return;
- }
- /* Map Parallel I/O ports registers */
- ret = of_address_to_resource(np_par, 0, &res);
- if (ret) {
- printk(KERN_WARNING "%s couldn;t map par_io registers\n",
- __func__);
- return;
- }
- base = ioremap(res.start, resource_size(&res));
+ /*
+ * UCC2 option 1: write 0b1010 to bits 24:27
+ * at address IMMRBAR+0x14AC
+ */
+ clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0);
+ } else if (SVR_REV(svid) == 0x0020) {
+ /*
+ * UCC1: write 0b11 to bits 18:19
+ * at address IMMRBAR+0x14A8
+ */
+ setbits32((base + 0xa8), 0x00003000);
/*
- * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
- * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+ * UCC2 option 1: write 0b11 to bits 4:5
+ * at address IMMRBAR+0x14A8
*/
- setbits32((base + 0xa8), 0x0c003000);
+ setbits32((base + 0xa8), 0x0c000000);
/*
- * IMMR + 0x14AC[20:27] = 10101010
- * (data delay for both UCC's)
+ * UCC2 option 2: write 0b11 to bits 16:17
+ * at address IMMRBAR+0x14AC
*/
- clrsetbits_be32((base + 0xac), 0xff0, 0xaa0);
- iounmap(base);
- of_node_put(np_par);
+ setbits32((base + 0xac), 0x0000c000);
}
+ iounmap(base);
+ of_node_put(np_par);
of_node_put(np);
}
-#endif /* CONFIG_QUICC_ENGINE */
+#endif /* CONFIG_QUICC_ENGINE */
}
machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index f000d81c4e31..159c01e91463 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -23,6 +23,15 @@ config FSL_85XX_CACHE_SRAM
cache-sram-size and cache-sram-offset kernel boot
parameters should be passed when this option is enabled.
+config BSC9131_RDB
+ bool "Freescale BSC9131RDB"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the Freescale BSC9131RDB board.
+ The BSC9131 is a heterogeneous SoC containing an e500v2 powerpc and a
+ StarCore SC3850 DSP
+ Manufacturer : Freescale Semiconductor, Inc
+
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
select DEFAULT_UIMAGE
@@ -175,12 +184,6 @@ config SBC8548
help
This option enables support for the Wind River SBC8548 board
-config SBC8560
- bool "Wind River SBC8560"
- select DEFAULT_UIMAGE
- help
- This option enables support for the Wind River SBC8560 board
-
config GE_IMP3A
bool "GE Intelligent Platforms IMP3A"
select DEFAULT_UIMAGE
@@ -222,18 +225,6 @@ config P3041_DS
help
This option enables support for the P3041 DS board
-config P3060_QDS
- bool "Freescale P3060 QDS"
- select DEFAULT_UIMAGE
- select PPC_E500MC
- select PHYS_64BIT
- select SWIOTLB
- select GPIO_MPC8XXX
- select HAS_RAPIDIO
- select PPC_EPAPR_HV_PIC
- help
- This option enables support for the P3060 QDS board
-
config P4080_DS
bool "Freescale P4080 DS"
select DEFAULT_UIMAGE
@@ -263,6 +254,22 @@ config P5020_DS
help
This option enables support for the P5020 DS board
+config PPC_QEMU_E500
+ bool "QEMU generic e500 platform"
+ depends on EXPERIMENTAL
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for running as a QEMU guest using
+ QEMU's generic e500 machine. This is not required if you're
+ using a QEMU machine that targets a specific board, such as
+ mpc8544ds.
+
+ Unlike most e500 boards that target a specific CPU, this
+ platform works with any e500-family CPU that QEMU supports.
+ Thus, you'll need to make sure CONFIG_PPC_E500MC is set or
+ unset based on the emulated CPU (or actual host CPU in the case
+ of KVM).
+
endif # FSL_SOC_BOOKE
config TQM85xx
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 2125d4ca068a..3dfe81175036 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_SMP) += smp.o
obj-y += common.o
+obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
@@ -17,14 +18,13 @@ obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
-obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
-obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o
+obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o
diff --git a/arch/powerpc/platforms/85xx/bsc913x_rdb.c b/arch/powerpc/platforms/85xx/bsc913x_rdb.c
new file mode 100644
index 000000000000..9d57bedb940c
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/bsc913x_rdb.c
@@ -0,0 +1,67 @@
+/*
+ * BSC913xRDB Board Setup
+ *
+ * Author: Priyanka Jain <Priyanka.Jain@freescale.com>
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/udbg.h>
+
+#include "mpc85xx.h"
+
+void __init bsc913x_rdb_pic_init(void)
+{
+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+
+ if (!mpic)
+ pr_err("bsc913x: Failed to allocate MPIC structure\n");
+ else
+ mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init bsc913x_rdb_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("bsc913x_rdb_setup_arch()", 0);
+
+ pr_info("bsc913x board from Freescale Semiconductor\n");
+}
+
+machine_device_initcall(bsc9131_rdb, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+
+static int __init bsc9131_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,bsc9131rdb");
+}
+
+define_machine(bsc9131_rdb) {
+ .name = "BSC9131 RDB",
+ .probe = bsc9131_rdb_probe,
+ .setup_arch = bsc913x_rdb_setup_arch,
+ .init_IRQ = bsc913x_rdb_pic_init,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index dd3617c531d7..925b02874233 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -77,7 +77,7 @@ void __init corenet_ds_setup_arch(void)
#endif
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/ge_imp3a.c b/arch/powerpc/platforms/85xx/ge_imp3a.c
index 18014629416d..b6a728b0a8ca 100644
--- a/arch/powerpc/platforms/85xx/ge_imp3a.c
+++ b/arch/powerpc/platforms/85xx/ge_imp3a.c
@@ -125,7 +125,7 @@ static void __init ge_imp3a_setup_arch(void)
mpc85xx_smp_init();
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 585bd22b1406..767c7cf18a9c 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -75,7 +75,7 @@ static void __init mpc8536_ds_setup_arch(void)
#endif
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 1fd91e9e0ffb..6d3265fe7718 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -114,71 +114,53 @@ void __init mpc85xx_ds_pic_init(void)
}
#ifdef CONFIG_PCI
-static int primary_phb_addr;
extern int uli_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn);
+static struct device_node *pci_with_uli;
+
static int mpc85xx_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn)
{
- struct device_node* node;
- struct resource rsrc;
-
- node = hose->dn;
- of_address_to_resource(node, 0, &rsrc);
-
- if ((rsrc.start & 0xfffff) == primary_phb_addr) {
+ if (hose->dn == pci_with_uli)
return uli_exclude_device(hose, bus, devfn);
- }
return PCIBIOS_SUCCESSFUL;
}
#endif /* CONFIG_PCI */
-/*
- * Setup the architecture
- */
-static void __init mpc85xx_ds_setup_arch(void)
+static void __init mpc85xx_ds_pci_init(void)
{
#ifdef CONFIG_PCI
- struct device_node *np;
- struct pci_controller *hose;
-#endif
- dma_addr_t max = 0xffffffff;
+ struct device_node *node;
- if (ppc_md.progress)
- ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
+ fsl_pci_init();
-#ifdef CONFIG_PCI
- for_each_node_by_type(np, "pci") {
- if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
- of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
- of_device_is_compatible(np, "fsl,p2020-pcie")) {
- struct resource rsrc;
- of_address_to_resource(np, 0, &rsrc);
- if ((rsrc.start & 0xfffff) == primary_phb_addr)
- fsl_add_bridge(np, 1);
- else
- fsl_add_bridge(np, 0);
-
- hose = pci_find_hose_for_OF_device(np);
- max = min(max, hose->dma_window_base_cur +
- hose->dma_window_size);
+ /* See if we have a ULI under the primary */
+
+ node = of_find_node_by_name(NULL, "uli1575");
+ while ((pci_with_uli = of_get_parent(node))) {
+ of_node_put(node);
+ node = pci_with_uli;
+
+ if (pci_with_uli == fsl_pci_primary) {
+ ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+ break;
}
}
-
- ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
+}
- mpc85xx_smp_init();
+/*
+ * Setup the architecture
+ */
+static void __init mpc85xx_ds_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
-#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
- ppc_swiotlb_enable = 1;
- set_pci_dma_ops(&swiotlb_dma_ops);
- ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
- }
-#endif
+ mpc85xx_ds_pci_init();
+ mpc85xx_smp_init();
printk("MPC85xx DS board from Freescale Semiconductor\n");
}
@@ -190,14 +172,7 @@ static int __init mpc8544_ds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
- if (of_flat_dt_is_compatible(root, "MPC8544DS")) {
-#ifdef CONFIG_PCI
- primary_phb_addr = 0xb000;
-#endif
- return 1;
- }
-
- return 0;
+ return !!of_flat_dt_is_compatible(root, "MPC8544DS");
}
machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
@@ -215,14 +190,7 @@ static int __init mpc8572_ds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
- if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS")) {
-#ifdef CONFIG_PCI
- primary_phb_addr = 0x8000;
-#endif
- return 1;
- }
-
- return 0;
+ return !!of_flat_dt_is_compatible(root, "fsl,MPC8572DS");
}
/*
@@ -232,14 +200,7 @@ static int __init p2020_ds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
- if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
-#ifdef CONFIG_PCI
- primary_phb_addr = 0x9000;
-#endif
- return 1;
- }
-
- return 0;
+ return !!of_flat_dt_is_compatible(root, "fsl,P2020DS");
}
define_machine(mpc8544_ds) {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index d208ebccb91c..8e4b094c553b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -359,7 +359,7 @@ static void __init mpc85xx_mds_setup_arch(void)
mpc85xx_mds_qe_init();
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 313fce4f5574..1910fdcb75b2 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -169,6 +169,7 @@ machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1024_rdb, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
@@ -237,6 +238,13 @@ static int __init p1020_utm_pc_probe(void)
return of_flat_dt_is_compatible(root, "fsl,P1020UTM-PC");
}
+static int __init p1024_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1024RDB");
+}
+
define_machine(p2020_rdb) {
.name = "P2020 RDB",
.probe = p2020_rdb_probe,
@@ -348,3 +356,17 @@ define_machine(p1020_rdb_pc) {
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
+
+define_machine(p1024_rdb) {
+ .name = "P1024 RDB",
+ .probe = p1024_rdb_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index f700c81a1321..89ee02c54561 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -27,6 +27,7 @@
#include <sysdev/fsl_pci.h>
#include <asm/udbg.h>
#include <asm/fsl_guts.h>
+#include <asm/fsl_lbc.h>
#include "smp.h"
#include "mpc85xx.h"
@@ -142,17 +143,73 @@ static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port,
{
}
+struct fsl_law {
+ u32 lawbar;
+ u32 reserved1;
+ u32 lawar;
+ u32 reserved[5];
+};
+
+#define LAWBAR_MASK 0x00F00000
+#define LAWBAR_SHIFT 12
+
+#define LAWAR_EN 0x80000000
+#define LAWAR_TGT_MASK 0x01F00000
+#define LAW_TRGT_IF_LBC (0x04 << 20)
+
+#define LAWAR_MASK (LAWAR_EN | LAWAR_TGT_MASK)
+#define LAWAR_MATCH (LAWAR_EN | LAW_TRGT_IF_LBC)
+
+#define BR_BA 0xFFFF8000
+
+/*
+ * Map a BRx value to a physical address
+ *
+ * The localbus BRx registers only store the lower 32 bits of the address. To
+ * obtain the upper four bits, we need to scan the LAW table. The entry which
+ * maps to the localbus will contain the upper four bits.
+ */
+static phys_addr_t lbc_br_to_phys(const void *ecm, unsigned int count, u32 br)
+{
+#ifndef CONFIG_PHYS_64BIT
+ /*
+ * If we only have 32-bit addressing, then the BRx address *is* the
+ * physical address.
+ */
+ return br & BR_BA;
+#else
+ const struct fsl_law *law = ecm + 0xc08;
+ unsigned int i;
+
+ for (i = 0; i < count; i++) {
+ u64 lawbar = in_be32(&law[i].lawbar);
+ u32 lawar = in_be32(&law[i].lawar);
+
+ if ((lawar & LAWAR_MASK) == LAWAR_MATCH)
+ /* Extract the upper four bits */
+ return (br & BR_BA) | ((lawbar & LAWBAR_MASK) << 12);
+ }
+
+ return 0;
+#endif
+}
+
/**
* p1022ds_set_monitor_port: switch the output to a different monitor port
- *
*/
static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
struct device_node *guts_node;
- struct device_node *indirect_node = NULL;
+ struct device_node *lbc_node = NULL;
+ struct device_node *law_node = NULL;
struct ccsr_guts __iomem *guts;
+ struct fsl_lbc_regs *lbc = NULL;
+ void *ecm = NULL;
u8 __iomem *lbc_lcs0_ba = NULL;
u8 __iomem *lbc_lcs1_ba = NULL;
+ phys_addr_t cs0_addr, cs1_addr;
+ const __be32 *iprop;
+ unsigned int num_laws;
u8 b;
/* Map the global utilities registers. */
@@ -168,24 +225,42 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
goto exit;
}
- indirect_node = of_find_compatible_node(NULL, NULL,
- "fsl,p1022ds-indirect-pixis");
- if (!indirect_node) {
- pr_err("p1022ds: missing pixis indirect mode node\n");
+ lbc_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
+ if (!lbc_node) {
+ pr_err("p1022ds: missing localbus node\n");
+ goto exit;
+ }
+
+ lbc = of_iomap(lbc_node, 0);
+ if (!lbc) {
+ pr_err("p1022ds: could not map localbus node\n");
+ goto exit;
+ }
+
+ law_node = of_find_compatible_node(NULL, NULL, "fsl,ecm-law");
+ if (!law_node) {
+ pr_err("p1022ds: missing local access window node\n");
goto exit;
}
- lbc_lcs0_ba = of_iomap(indirect_node, 0);
- if (!lbc_lcs0_ba) {
- pr_err("p1022ds: could not map localbus chip select 0\n");
+ ecm = of_iomap(law_node, 0);
+ if (!ecm) {
+ pr_err("p1022ds: could not map local access window node\n");
goto exit;
}
- lbc_lcs1_ba = of_iomap(indirect_node, 1);
- if (!lbc_lcs1_ba) {
- pr_err("p1022ds: could not map localbus chip select 1\n");
+ iprop = of_get_property(law_node, "fsl,num-laws", 0);
+ if (!iprop) {
+ pr_err("p1022ds: LAW node is missing fsl,num-laws property\n");
goto exit;
}
+ num_laws = be32_to_cpup(iprop);
+
+ cs0_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[0].br));
+ cs1_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[1].br));
+
+ lbc_lcs0_ba = ioremap(cs0_addr, 1);
+ lbc_lcs1_ba = ioremap(cs1_addr, 1);
/* Make sure we're in indirect mode first. */
if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
@@ -254,10 +329,15 @@ exit:
iounmap(lbc_lcs1_ba);
if (lbc_lcs0_ba)
iounmap(lbc_lcs0_ba);
+ if (lbc)
+ iounmap(lbc);
+ if (ecm)
+ iounmap(ecm);
if (guts)
iounmap(guts);
- of_node_put(indirect_node);
+ of_node_put(law_node);
+ of_node_put(lbc_node);
of_node_put(guts_node);
}
@@ -348,13 +428,7 @@ void __init p1022_ds_pic_init(void)
*/
static void __init disable_one_node(struct device_node *np, struct property *new)
{
- struct property *old;
-
- old = of_find_property(np, new->name, NULL);
- if (old)
- prom_update_property(np, new, old);
- else
- prom_add_property(np, new);
+ prom_update_property(np, new);
}
/* TRUE if there is a "video=fslfb" command-line parameter. */
@@ -450,7 +524,7 @@ static void __init p1022_ds_setup_arch(void)
mpc85xx_smp_init();
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/p3060_qds.c b/arch/powerpc/platforms/85xx/p3060_qds.c
deleted file mode 100644
index 081cf4ac1881..000000000000
--- a/arch/powerpc/platforms/85xx/p3060_qds.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * P3060 QDS Setup
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p3060_qds_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
- extern struct smp_ops_t smp_85xx_ops;
-#endif
-
- if (of_flat_dt_is_compatible(root, "fsl,P3060QDS"))
- return 1;
-
- /* Check if we're running under the Freescale hypervisor */
- if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) {
- ppc_md.init_IRQ = ehv_pic_init;
- ppc_md.get_irq = ehv_pic_get_irq;
- ppc_md.restart = fsl_hv_restart;
- ppc_md.power_off = fsl_hv_halt;
- ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
- /*
- * Disable the timebase sync operations because we can't write
- * to the timebase registers under the hypervisor.
- */
- smp_85xx_ops.give_timebase = NULL;
- smp_85xx_ops.take_timebase = NULL;
-#endif
- return 1;
- }
-
- return 0;
-}
-
-define_machine(p3060_qds) {
- .name = "P3060 QDS",
- .probe = p3060_qds_probe,
- .setup_arch = corenet_ds_setup_arch,
- .init_IRQ = corenet_ds_pic_init,
-#ifdef CONFIG_PCI
- .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
-#endif
- .get_irq = mpic_get_coreint_irq,
- .restart = fsl_rstcr_restart,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
- .power_save = e500_idle,
-};
-
-machine_device_initcall(p3060_qds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
-#endif
diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c
new file mode 100644
index 000000000000..95a2e53af71b
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/qemu_e500.c
@@ -0,0 +1,72 @@
+/*
+ * Paravirt target for a generic QEMU e500 machine
+ *
+ * This is intended to be a flexible device-tree-driven platform, not fixed
+ * to a particular piece of hardware or a particular spec of virtual hardware,
+ * beyond the assumption of an e500-family CPU. Some things are still hardcoded
+ * here, such as MPIC, but this is a limitation of the current code rather than
+ * an interface contract with QEMU.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_fdt.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+#include "mpc85xx.h"
+
+void __init qemu_e500_pic_init(void)
+{
+ struct mpic *mpic;
+
+ mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+}
+
+static void __init qemu_e500_setup_arch(void)
+{
+ ppc_md.progress("qemu_e500_setup_arch()", 0);
+
+ fsl_pci_init();
+ mpc85xx_smp_init();
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init qemu_e500_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return !!of_flat_dt_is_compatible(root, "fsl,qemu-e500");
+}
+
+machine_device_initcall(qemu_e500, mpc85xx_common_publish_devices);
+
+define_machine(qemu_e500) {
+ .name = "QEMU e500",
+ .probe = qemu_e500_probe,
+ .setup_arch = qemu_e500_setup_arch,
+ .init_IRQ = qemu_e500_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
deleted file mode 100644
index b1be632ede43..000000000000
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Wind River SBC8560 setup and early boot code.
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * By Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpic.h>
-#include <mm/mmu_decl.h>
-#include <asm/udbg.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-
-#include "mpc85xx.h"
-
-#ifdef CONFIG_CPM2
-#include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-#endif
-
-static void __init sbc8560_pic_init(void)
-{
- struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
- 0, 256, " OpenPIC ");
- BUG_ON(mpic == NULL);
- mpic_init(mpic);
-
- mpc85xx_cpm2_pic_init();
-}
-
-/*
- * Setup the architecture
- */
-#ifdef CONFIG_CPM2
-struct cpm_pin {
- int port, pin, flags;
-};
-
-static const struct cpm_pin sbc8560_pins[] = {
- /* SCC1 */
- {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
- {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
- /* SCC2 */
- {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
- /* FCC2 */
- {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
- {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
- {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
-
- /* FCC3 */
- {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
- {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
-};
-
-static void __init init_ioports(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
- const struct cpm_pin *pin = &sbc8560_pins[i];
- cpm2_set_pin(pin->port, pin->pin, pin->flags);
- }
-
- cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
-}
-#endif
-
-static void __init sbc8560_setup_arch(void)
-{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
- if (ppc_md.progress)
- ppc_md.progress("sbc8560_setup_arch()", 0);
-
-#ifdef CONFIG_CPM2
- cpm2_reset();
- init_ioports();
-#endif
-
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
- fsl_add_bridge(np, 1);
-#endif
-}
-
-static void sbc8560_show_cpuinfo(struct seq_file *m)
-{
- uint pvid, svid, phid1;
-
- pvid = mfspr(SPRN_PVR);
- svid = mfspr(SPRN_SVR);
-
- seq_printf(m, "Vendor\t\t: Wind River\n");
- seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
- seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
- /* Display cpu Pll setting */
- phid1 = mfspr(SPRN_HID1);
- seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-}
-
-machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init sbc8560_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- return of_flat_dt_is_compatible(root, "SBC8560");
-}
-
-#ifdef CONFIG_RTC_DRV_M48T59
-static int __init sbc8560_rtc_init(void)
-{
- struct device_node *np;
- struct resource res;
- struct platform_device *rtc_dev;
-
- np = of_find_compatible_node(NULL, NULL, "m48t59");
- if (np == NULL) {
- printk("No RTC in DTB. Has it been eaten by wild dogs?\n");
- return -ENODEV;
- }
-
- of_address_to_resource(np, 0, &res);
- of_node_put(np);
-
- printk("Found RTC (m48t59) at i/o 0x%x\n", res.start);
-
- rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1);
-
- if (IS_ERR(rtc_dev)) {
- printk("Registering sbc8560 RTC device failed\n");
- return PTR_ERR(rtc_dev);
- }
-
- return 0;
-}
-
-arch_initcall(sbc8560_rtc_init);
-
-#endif /* M48T59 */
-
-static __u8 __iomem *brstcr;
-
-static int __init sbc8560_bdrstcr_init(void)
-{
- struct device_node *np;
- struct resource res;
-
- np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
- if (np == NULL) {
- printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
- return -ENODEV;
- }
-
- of_address_to_resource(np, 0, &res);
-
- printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
-
- brstcr = ioremap(res.start, resource_size(&res));
- if(!brstcr)
- printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
-
- of_node_put(np);
-
- return 0;
-}
-
-arch_initcall(sbc8560_bdrstcr_init);
-
-void sbc8560_rstcr_restart(char * cmd)
-{
- local_irq_disable();
- if(brstcr)
- clrbits8(brstcr, 0x80);
-
- while(1);
-}
-
-define_machine(sbc8560) {
- .name = "SBC8560",
- .probe = sbc8560_probe,
- .setup_arch = sbc8560_setup_arch,
- .init_IRQ = sbc8560_pic_init,
- .show_cpuinfo = sbc8560_show_cpuinfo,
- .get_irq = mpic_get_irq,
- .restart = sbc8560_rstcr_restart,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
-};
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 3755e61d7ecf..817245bc0219 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -102,7 +102,7 @@ mpc86xx_hpcn_setup_arch(void)
#endif
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 61c9550819a2..30fd01de6bed 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -159,6 +159,10 @@ config PPC_E500MC
bool "e500mc Support"
select PPC_FPU
depends on E500
+ help
+ This must be enabled for running on e500mc (and derivatives
+ such as e5500/e6500), and must be disabled for running on
+ e500v1 or e500v2.
config PPC_FPU
bool
diff --git a/arch/powerpc/platforms/cell/beat_hvCall.S b/arch/powerpc/platforms/cell/beat_hvCall.S
index 74c817448948..96c801907126 100644
--- a/arch/powerpc/platforms/cell/beat_hvCall.S
+++ b/arch/powerpc/platforms/cell/beat_hvCall.S
@@ -22,8 +22,6 @@
#include <asm/ppc_asm.h>
-#define STK_PARM(i) (48 + ((i)-3)*8)
-
/* Not implemented on Beat, now */
#define HCALL_INST_PRECALL
#define HCALL_INST_POSTCALL
@@ -74,7 +72,7 @@ _GLOBAL(beat_hcall_norets8)
mr r6,r7
mr r7,r8
mr r8,r9
- ld r10,STK_PARM(r10)(r1)
+ ld r10,STK_PARAM(R10)(r1)
HVSC /* invoke the hypervisor */
@@ -94,7 +92,7 @@ _GLOBAL(beat_hcall1)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -108,7 +106,7 @@ _GLOBAL(beat_hcall1)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
lwz r0,8(r1)
@@ -125,7 +123,7 @@ _GLOBAL(beat_hcall2)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -139,7 +137,7 @@ _GLOBAL(beat_hcall2)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
@@ -157,7 +155,7 @@ _GLOBAL(beat_hcall3)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -171,7 +169,7 @@ _GLOBAL(beat_hcall3)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -190,7 +188,7 @@ _GLOBAL(beat_hcall4)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -204,7 +202,7 @@ _GLOBAL(beat_hcall4)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -224,7 +222,7 @@ _GLOBAL(beat_hcall5)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -238,7 +236,7 @@ _GLOBAL(beat_hcall5)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -259,7 +257,7 @@ _GLOBAL(beat_hcall6)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -273,7 +271,7 @@ _GLOBAL(beat_hcall6)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index b9f509a34c01..c264969c9319 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -518,7 +518,6 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
__set_bit(0, window->table.it_map);
tce_build_cell(&window->table, window->table.it_offset, 1,
(unsigned long)iommu->pad_page, DMA_TO_DEVICE, NULL);
- window->table.it_hint = window->table.it_blocksize;
return window;
}
diff --git a/arch/powerpc/platforms/powernv/opal-takeover.S b/arch/powerpc/platforms/powernv/opal-takeover.S
index 77b48b2b9309..3cd262897c27 100644
--- a/arch/powerpc/platforms/powernv/opal-takeover.S
+++ b/arch/powerpc/platforms/powernv/opal-takeover.S
@@ -14,8 +14,6 @@
#include <asm/asm-offsets.h>
#include <asm/opal.h>
-#define STK_PARAM(i) (48 + ((i)-3)*8)
-
#define H_HAL_TAKEOVER 0x5124
#define H_HAL_TAKEOVER_QUERY_MAGIC -1
@@ -23,14 +21,14 @@
_GLOBAL(opal_query_takeover)
mfcr r0
stw r0,8(r1)
- std r3,STK_PARAM(r3)(r1)
- std r4,STK_PARAM(r4)(r1)
+ std r3,STK_PARAM(R3)(r1)
+ std r4,STK_PARAM(R4)(r1)
li r3,H_HAL_TAKEOVER
li r4,H_HAL_TAKEOVER_QUERY_MAGIC
HVSC
- ld r10,STK_PARAM(r3)(r1)
+ ld r10,STK_PARAM(R3)(r1)
std r4,0(r10)
- ld r10,STK_PARAM(r4)(r1)
+ ld r10,STK_PARAM(R4)(r1)
std r5,0(r10)
lwz r0,8(r1)
mtcrf 0xff,r0
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index 4cb375c0f8d1..fb506317ebb0 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -85,8 +85,10 @@ static int eeh_event_handler(void * dummy)
set_current_state(TASK_INTERRUPTIBLE); /* Don't add to load average */
edev = handle_eeh_events(event);
- eeh_clear_slot(eeh_dev_to_of_node(edev), EEH_MODE_RECOVERING);
- pci_dev_put(edev->pdev);
+ if (edev) {
+ eeh_clear_slot(eeh_dev_to_of_node(edev), EEH_MODE_RECOVERING);
+ pci_dev_put(edev->pdev);
+ }
kfree(event);
mutex_unlock(&eeh_event_mutex);
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 8752f79a6af8..c33360ec4f4f 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -81,7 +81,7 @@ static int pseries_eeh_init(void)
ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
ibm_configure_pe = rtas_token("ibm,configure-pe");
- ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
+ ibm_configure_bridge = rtas_token("ibm,configure-bridge");
/* necessary sanity check */
if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) {
@@ -89,7 +89,7 @@ static int pseries_eeh_init(void)
__func__);
return -EINVAL;
} else if (ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE) {
- pr_warning("%s: RTAS service <ibm, set-slot-reset> invalid\n",
+ pr_warning("%s: RTAS service <ibm,set-slot-reset> invalid\n",
__func__);
return -EINVAL;
} else if (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index 3ce73d0052b1..444fe7759e55 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -13,8 +13,6 @@
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
-#define STK_PARM(i) (48 + ((i)-3)*8)
-
#ifdef CONFIG_TRACEPOINTS
.section ".toc","aw"
@@ -26,7 +24,7 @@ hcall_tracepoint_refcount:
.section ".text"
/*
- * precall must preserve all registers. use unused STK_PARM()
+ * precall must preserve all registers. use unused STK_PARAM()
* areas to save snapshots and opcode. We branch around this
* in early init (eg when populating the MMU hashtable) by using an
* unconditional cpu feature.
@@ -40,28 +38,28 @@ END_FTR_SECTION(0, 1); \
cmpdi r12,0; \
beq+ 1f; \
mflr r0; \
- std r3,STK_PARM(r3)(r1); \
- std r4,STK_PARM(r4)(r1); \
- std r5,STK_PARM(r5)(r1); \
- std r6,STK_PARM(r6)(r1); \
- std r7,STK_PARM(r7)(r1); \
- std r8,STK_PARM(r8)(r1); \
- std r9,STK_PARM(r9)(r1); \
- std r10,STK_PARM(r10)(r1); \
+ std r3,STK_PARAM(R3)(r1); \
+ std r4,STK_PARAM(R4)(r1); \
+ std r5,STK_PARAM(R5)(r1); \
+ std r6,STK_PARAM(R6)(r1); \
+ std r7,STK_PARAM(R7)(r1); \
+ std r8,STK_PARAM(R8)(r1); \
+ std r9,STK_PARAM(R9)(r1); \
+ std r10,STK_PARAM(R10)(r1); \
std r0,16(r1); \
- addi r4,r1,STK_PARM(FIRST_REG); \
+ addi r4,r1,STK_PARAM(FIRST_REG); \
stdu r1,-STACK_FRAME_OVERHEAD(r1); \
bl .__trace_hcall_entry; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
- ld r3,STK_PARM(r3)(r1); \
- ld r4,STK_PARM(r4)(r1); \
- ld r5,STK_PARM(r5)(r1); \
- ld r6,STK_PARM(r6)(r1); \
- ld r7,STK_PARM(r7)(r1); \
- ld r8,STK_PARM(r8)(r1); \
- ld r9,STK_PARM(r9)(r1); \
- ld r10,STK_PARM(r10)(r1); \
+ ld r3,STK_PARAM(R3)(r1); \
+ ld r4,STK_PARAM(R4)(r1); \
+ ld r5,STK_PARAM(R5)(r1); \
+ ld r6,STK_PARAM(R6)(r1); \
+ ld r7,STK_PARAM(R7)(r1); \
+ ld r8,STK_PARAM(R8)(r1); \
+ ld r9,STK_PARAM(R9)(r1); \
+ ld r10,STK_PARAM(R10)(r1); \
mtlr r0; \
1:
@@ -79,8 +77,8 @@ END_FTR_SECTION(0, 1); \
cmpdi r12,0; \
beq+ 1f; \
mflr r0; \
- ld r6,STK_PARM(r3)(r1); \
- std r3,STK_PARM(r3)(r1); \
+ ld r6,STK_PARAM(R3)(r1); \
+ std r3,STK_PARAM(R3)(r1); \
mr r4,r3; \
mr r3,r6; \
std r0,16(r1); \
@@ -88,7 +86,7 @@ END_FTR_SECTION(0, 1); \
bl .__trace_hcall_exit; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
- ld r3,STK_PARM(r3)(r1); \
+ ld r3,STK_PARAM(R3)(r1); \
mtlr r0; \
1:
@@ -114,7 +112,7 @@ _GLOBAL(plpar_hcall_norets)
mfcr r0
stw r0,8(r1)
- HCALL_INST_PRECALL(r4)
+ HCALL_INST_PRECALL(R4)
HVSC /* invoke the hypervisor */
@@ -130,9 +128,9 @@ _GLOBAL(plpar_hcall)
mfcr r0
stw r0,8(r1)
- HCALL_INST_PRECALL(r5)
+ HCALL_INST_PRECALL(R5)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -143,7 +141,7 @@ _GLOBAL(plpar_hcall)
HVSC /* invoke the hypervisor */
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -168,7 +166,7 @@ _GLOBAL(plpar_hcall_raw)
mfcr r0
stw r0,8(r1)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -179,7 +177,7 @@ _GLOBAL(plpar_hcall_raw)
HVSC /* invoke the hypervisor */
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -196,9 +194,9 @@ _GLOBAL(plpar_hcall9)
mfcr r0
stw r0,8(r1)
- HCALL_INST_PRECALL(r5)
+ HCALL_INST_PRECALL(R5)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -206,14 +204,14 @@ _GLOBAL(plpar_hcall9)
mr r7,r8
mr r8,r9
mr r9,r10
- ld r10,STK_PARM(r11)(r1) /* put arg7 in R10 */
- ld r11,STK_PARM(r12)(r1) /* put arg8 in R11 */
- ld r12,STK_PARM(r13)(r1) /* put arg9 in R12 */
+ ld r10,STK_PARAM(R11)(r1) /* put arg7 in R10 */
+ ld r11,STK_PARAM(R12)(r1) /* put arg8 in R11 */
+ ld r12,STK_PARAM(R13)(r1) /* put arg9 in R12 */
HVSC /* invoke the hypervisor */
mr r0,r12
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -238,7 +236,7 @@ _GLOBAL(plpar_hcall9_raw)
mfcr r0
stw r0,8(r1)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -246,14 +244,14 @@ _GLOBAL(plpar_hcall9_raw)
mr r7,r8
mr r8,r9
mr r9,r10
- ld r10,STK_PARM(r11)(r1) /* put arg7 in R10 */
- ld r11,STK_PARM(r12)(r1) /* put arg8 in R11 */
- ld r12,STK_PARM(r13)(r1) /* put arg9 in R12 */
+ ld r10,STK_PARAM(R11)(r1) /* put arg7 in R10 */
+ ld r11,STK_PARAM(R12)(r1) /* put arg8 in R11 */
+ ld r12,STK_PARAM(R13)(r1) /* put arg9 in R12 */
HVSC /* invoke the hypervisor */
mr r0,r12
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 2d311c0caf8e..07c09cbbfb19 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -192,12 +192,15 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
long l, limit;
long tcenum_start = tcenum, npages_start = npages;
int ret = 0;
+ unsigned long flags;
if (npages == 1) {
return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
direction, attrs);
}
+ local_irq_save(flags); /* to protect tcep and the page behind it */
+
tcep = __get_cpu_var(tce_page);
/* This is safe to do since interrupts are off when we're called
@@ -207,6 +210,7 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
tcep = (u64 *)__get_free_page(GFP_ATOMIC);
/* If allocation fails, fall back to the loop implementation */
if (!tcep) {
+ local_irq_restore(flags);
return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
direction, attrs);
}
@@ -240,6 +244,8 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
tcenum += limit;
} while (npages > 0 && !rc);
+ local_irq_restore(flags);
+
if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
ret = (int)rc;
tce_freemulti_pSeriesLP(tbl, tcenum_start,
@@ -707,6 +713,21 @@ static int __init disable_ddw_setup(char *str)
early_param("disable_ddw", disable_ddw_setup);
+static inline void __remove_ddw(struct device_node *np, const u32 *ddw_avail, u64 liobn)
+{
+ int ret;
+
+ ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn);
+ if (ret)
+ pr_warning("%s: failed to remove DMA window: rtas returned "
+ "%d to ibm,remove-pe-dma-window(%x) %llx\n",
+ np->full_name, ret, ddw_avail[2], liobn);
+ else
+ pr_debug("%s: successfully removed DMA window: rtas returned "
+ "%d to ibm,remove-pe-dma-window(%x) %llx\n",
+ np->full_name, ret, ddw_avail[2], liobn);
+}
+
static void remove_ddw(struct device_node *np)
{
struct dynamic_dma_window_prop *dwp;
@@ -736,15 +757,7 @@ static void remove_ddw(struct device_node *np)
pr_debug("%s successfully cleared tces in window.\n",
np->full_name);
- ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn);
- if (ret)
- pr_warning("%s: failed to remove direct window: rtas returned "
- "%d to ibm,remove-pe-dma-window(%x) %llx\n",
- np->full_name, ret, ddw_avail[2], liobn);
- else
- pr_debug("%s: successfully removed direct window: rtas returned "
- "%d to ibm,remove-pe-dma-window(%x) %llx\n",
- np->full_name, ret, ddw_avail[2], liobn);
+ __remove_ddw(np, ddw_avail, liobn);
delprop:
ret = prom_remove_property(np, win64);
@@ -869,6 +882,35 @@ static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail,
return ret;
}
+static void restore_default_window(struct pci_dev *dev,
+ u32 ddw_restore_token, unsigned long liobn)
+{
+ struct eeh_dev *edev;
+ u32 cfg_addr;
+ u64 buid;
+ int ret;
+
+ /*
+ * Get the config address and phb buid of the PE window.
+ * Rely on eeh to retrieve this for us.
+ * Retrieve them from the pci device, not the node with the
+ * dma-window property
+ */
+ edev = pci_dev_to_eeh_dev(dev);
+ cfg_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ cfg_addr = edev->pe_config_addr;
+ buid = edev->phb->buid;
+
+ do {
+ ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr,
+ BUID_HI(buid), BUID_LO(buid));
+ } while (rtas_busy_delay(ret));
+ dev_info(&dev->dev,
+ "ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n",
+ ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret);
+}
+
/*
* If the PE supports dynamic dma windows, and there is space for a table
* that can map all pages in a linear offset, then setup such a table,
@@ -889,9 +931,13 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
u64 dma_addr, max_addr;
struct device_node *dn;
const u32 *uninitialized_var(ddw_avail);
+ const u32 *uninitialized_var(ddw_extensions);
+ u32 ddw_restore_token = 0;
struct direct_window *window;
struct property *win64;
struct dynamic_dma_window_prop *ddwprop;
+ const void *dma_window = NULL;
+ unsigned long liobn, offset, size;
mutex_lock(&direct_window_init_mutex);
@@ -911,7 +957,40 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
if (!ddw_avail || len < 3 * sizeof(u32))
goto out_unlock;
- /*
+ /*
+ * the extensions property is only required to exist in certain
+ * levels of firmware and later
+ * the ibm,ddw-extensions property is a list with the first
+ * element containing the number of extensions and each
+ * subsequent entry is a value corresponding to that extension
+ */
+ ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions", &len);
+ if (ddw_extensions) {
+ /*
+ * each new defined extension length should be added to
+ * the top of the switch so the "earlier" entries also
+ * get picked up
+ */
+ switch (ddw_extensions[0]) {
+ /* ibm,reset-pe-dma-windows */
+ case 1:
+ ddw_restore_token = ddw_extensions[1];
+ break;
+ }
+ }
+
+ /*
+ * Only remove the existing DMA window if we can restore back to
+ * the default state. Removing the existing window maximizes the
+ * resources available to firmware for dynamic window creation.
+ */
+ if (ddw_restore_token) {
+ dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
+ of_parse_dma_window(pdn, dma_window, &liobn, &offset, &size);
+ __remove_ddw(pdn, ddw_avail, liobn);
+ }
+
+ /*
* Query if there is a second window of size to map the
* whole partition. Query returns number of windows, largest
* block assigned to PE (partition endpoint), and two bitmasks
@@ -920,7 +999,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
dn = pci_device_to_OF_node(dev);
ret = query_ddw(dev, ddw_avail, &query);
if (ret != 0)
- goto out_unlock;
+ goto out_restore_window;
if (query.windows_available == 0) {
/*
@@ -929,7 +1008,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
* trading in for a larger page size.
*/
dev_dbg(&dev->dev, "no free dynamic windows");
- goto out_unlock;
+ goto out_restore_window;
}
if (query.page_size & 4) {
page_shift = 24; /* 16MB */
@@ -940,7 +1019,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
} else {
dev_dbg(&dev->dev, "no supported direct page size in mask %x",
query.page_size);
- goto out_unlock;
+ goto out_restore_window;
}
/* verify the window * number of ptes will map the partition */
/* check largest block * page size > max memory hotplug addr */
@@ -949,14 +1028,14 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
dev_dbg(&dev->dev, "can't map partiton max 0x%llx with %u "
"%llu-sized pages\n", max_addr, query.largest_available_block,
1ULL << page_shift);
- goto out_unlock;
+ goto out_restore_window;
}
len = order_base_2(max_addr);
win64 = kzalloc(sizeof(struct property), GFP_KERNEL);
if (!win64) {
dev_info(&dev->dev,
"couldn't allocate property for 64bit dma window\n");
- goto out_unlock;
+ goto out_restore_window;
}
win64->name = kstrdup(DIRECT64_PROPNAME, GFP_KERNEL);
win64->value = ddwprop = kmalloc(sizeof(*ddwprop), GFP_KERNEL);
@@ -1018,6 +1097,10 @@ out_free_prop:
kfree(win64->value);
kfree(win64);
+out_restore_window:
+ if (ddw_restore_token)
+ restore_default_window(dev, ddw_restore_token, liobn);
+
out_unlock:
mutex_unlock(&direct_window_init_mutex);
return dma_addr;
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 029a562af373..dd30b12edfe4 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -67,7 +67,6 @@ static int update_dt_property(struct device_node *dn, struct property **prop,
const char *name, u32 vd, char *value)
{
struct property *new_prop = *prop;
- struct property *old_prop;
int more = 0;
/* A negative 'vd' value indicates that only part of the new property
@@ -117,12 +116,7 @@ static int update_dt_property(struct device_node *dn, struct property **prop,
}
if (!more) {
- old_prop = of_find_property(dn, new_prop->name, NULL);
- if (old_prop)
- prom_update_property(dn, new_prop, old_prop);
- else
- prom_add_property(dn, new_prop);
-
+ prom_update_property(dn, new_prop);
new_prop = NULL;
}
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index c71be66bd5dc..455760b1fe6e 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -11,6 +11,7 @@
#include <linux/moduleparam.h>
#include <linux/cpuidle.h>
#include <linux/cpu.h>
+#include <linux/notifier.h>
#include <asm/paca.h>
#include <asm/reg.h>
@@ -189,17 +190,40 @@ static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
.enter = &shared_cede_loop },
};
-int pseries_notify_cpuidle_add_cpu(int cpu)
+static int pseries_cpuidle_add_cpu_notifier(struct notifier_block *n,
+ unsigned long action, void *hcpu)
{
+ int hotcpu = (unsigned long)hcpu;
struct cpuidle_device *dev =
- per_cpu_ptr(pseries_cpuidle_devices, cpu);
+ per_cpu_ptr(pseries_cpuidle_devices, hotcpu);
+
if (dev && cpuidle_get_driver()) {
- cpuidle_disable_device(dev);
- cpuidle_enable_device(dev);
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ cpuidle_pause_and_lock();
+ cpuidle_enable_device(dev);
+ cpuidle_resume_and_unlock();
+ break;
+
+ case CPU_DEAD:
+ case CPU_DEAD_FROZEN:
+ cpuidle_pause_and_lock();
+ cpuidle_disable_device(dev);
+ cpuidle_resume_and_unlock();
+ break;
+
+ default:
+ return NOTIFY_DONE;
+ }
}
- return 0;
+ return NOTIFY_OK;
}
+static struct notifier_block setup_hotplug_notifier = {
+ .notifier_call = pseries_cpuidle_add_cpu_notifier,
+};
+
/*
* pseries_cpuidle_driver_init()
*/
@@ -324,6 +348,7 @@ static int __init pseries_processor_idle_init(void)
return retval;
}
+ register_cpu_notifier(&setup_hotplug_notifier);
printk(KERN_DEBUG "pseries_idle_driver registered\n");
return 0;
@@ -332,6 +357,7 @@ static int __init pseries_processor_idle_init(void)
static void __exit pseries_processor_idle_exit(void)
{
+ unregister_cpu_notifier(&setup_hotplug_notifier);
pseries_idle_devices_uninit();
cpuidle_unregister_driver(&pseries_idle_driver);
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 7b3bf76ef834..39f71fba9b38 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -432,7 +432,7 @@ static int do_update_property(char *buf, size_t bufsize)
unsigned char *value;
char *name, *end, *next_prop;
int rc, length;
- struct property *newprop, *oldprop;
+ struct property *newprop;
buf = parse_node(buf, bufsize, &np);
end = buf + bufsize;
@@ -443,6 +443,9 @@ static int do_update_property(char *buf, size_t bufsize)
if (!next_prop)
return -EINVAL;
+ if (!strlen(name))
+ return -ENODEV;
+
newprop = new_property(name, length, value, NULL);
if (!newprop)
return -ENOMEM;
@@ -450,18 +453,11 @@ static int do_update_property(char *buf, size_t bufsize)
if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size"))
slb_set_size(*(int *)value);
- oldprop = of_find_property(np, name,NULL);
- if (!oldprop) {
- if (strlen(name))
- return prom_add_property(np, newprop);
- return -ENODEV;
- }
-
upd_value.node = np;
upd_value.property = newprop;
pSeries_reconfig_notify(PSERIES_UPDATE_PROPERTY, &upd_value);
- rc = prom_update_property(np, newprop, oldprop);
+ rc = prom_update_property(np, newprop);
if (rc)
return rc;
@@ -486,7 +482,7 @@ static int do_update_property(char *buf, size_t bufsize)
rc = pSeries_reconfig_notify(action, value);
if (rc) {
- prom_update_property(np, oldprop, newprop);
+ prom_update_property(np, newprop);
return rc;
}
}
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index e16bb8d48550..71706bc34a0d 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -147,7 +147,6 @@ static void __devinit smp_xics_setup_cpu(int cpu)
set_cpu_current_state(cpu, CPU_STATE_ONLINE);
set_default_offline_state(cpu);
#endif
- pseries_notify_cpuidle_add_cpu(cpu);
}
static int __devinit smp_pSeries_kick_cpu(int nr)