1 files changed, 0 insertions, 81 deletions
diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
deleted file mode 100644
index 4a8980027ecf..000000000000
--- a/arch/mips/alchemy/devboards/db1200/setup.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Alchemy/AMD/RMI DB1200 board setup.
- *
- * Licensed under the terms outlined in the file COPYING in the root of
- * this source archive.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/mach-db1x00/db1200.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Db1200";
-}
-
-void __init board_setup(void)
-{
-	unsigned long freq0, clksrc, div, pfc;
-	unsigned short whoami;
-
-	bcsr_init(DB1200_BCSR_PHYS_ADDR,
-		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
-
-	whoami = bcsr_read(BCSR_WHOAMI);
-	printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
-		"  Board-ID %d  Daughtercard ID %d\n",
-		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
-
-	/* SMBus/SPI on PSC0, Audio on PSC1 */
-	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
-	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
-	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
-	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
-	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
-	wmb();
-
-	/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
-	 * CPU clock; all other clock generators off/unused.
-	 */
-	div = (get_au1x00_speed() + 25000000) / 50000000;
-	if (div & 1)
-		div++;
-	div = ((div >> 1) - 1) & 0xff;
-
-	freq0 = div << SYS_FC_FRDIV0_BIT;
-	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
-	wmb();
-	freq0 |= SYS_FC_FE0;	/* enable F0 */
-	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
-	wmb();
-
-	/* psc0_intclk comes 1:1 from F0 */
-	clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
-	__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
-	wmb();
-}
-
-static int __init db1200_arch_init(void)
-{
-	/* GPIO7 is low-level triggered CPLD cascade */
-	irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
-	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
-
-	/* insert/eject pairs: one of both is always screaming.  To avoid
-	 * issues they must not be automatically enabled when initially
-	 * requested.
-	 */
-	irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
-	return 0;
-}
-arch_initcall(db1200_arch_init);