summaryrefslogtreecommitdiff
path: root/arch/avr32/boards/favr-32
diff options
context:
space:
mode:
Diffstat (limited to 'arch/avr32/boards/favr-32')
-rw-r--r--arch/avr32/boards/favr-32/setup.c31
1 files changed, 11 insertions, 20 deletions
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 1ee4faf0742d..745c408c2ac5 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -17,6 +17,7 @@
#include <linux/linkage.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/atmel-mci.h>
#include <linux/atmel-pwm-bl.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -79,6 +80,14 @@ static struct spi_board_info __initdata spi1_board_info[] = {
},
};
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+};
+
static struct fb_videomode __initdata lb104v03_modes[] = {
{
.name = "640x480 @ 50",
@@ -307,28 +316,10 @@ static int __init favr32_init(void)
* Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific
* pins so that nobody messes with them.
*/
- at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
- at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
- at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
- at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
- at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
- at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
- at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
- at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
- at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
- at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
- at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
- at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
- at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
- at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
- at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
- at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
- at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
+ at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
at32_select_gpio(GPIO_PIN_PB(3), 0); /* IRQ from ADS7843 */
- at32_add_system_devices();
-
at32_add_device_usart(0);
set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
@@ -339,7 +330,7 @@ static int __init favr32_init(void)
at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel);
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- at32_add_device_mci(0, NULL);
+ at32_add_device_mci(0, &mci0_data);
at32_add_device_usba(0, NULL);
at32_add_device_lcdc(0, &favr32_lcdc_data, fbmem_start, fbmem_size, 0);