diff options
Diffstat (limited to 'arch/arm')
26 files changed, 426 insertions, 129 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bf7273f3dc64..b527bf5701c9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "Linux Kernel Configuration" - config ARM bool default y diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index e0cb6370ed14..3e97483abcf0 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -1075,13 +1075,15 @@ out: } #endif -long arch_ptrace(struct task_struct *child, long request, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, + unsigned long addr, unsigned long data) { int ret; + unsigned long __user *datap = (unsigned long __user *) data; switch (request) { case PTRACE_PEEKUSR: - ret = ptrace_read_user(child, addr, (unsigned long __user *)data); + ret = ptrace_read_user(child, addr, datap); break; case PTRACE_POKEUSR: @@ -1089,34 +1091,34 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; case PTRACE_GETREGS: - ret = ptrace_getregs(child, (void __user *)data); + ret = ptrace_getregs(child, datap); break; case PTRACE_SETREGS: - ret = ptrace_setregs(child, (void __user *)data); + ret = ptrace_setregs(child, datap); break; case PTRACE_GETFPREGS: - ret = ptrace_getfpregs(child, (void __user *)data); + ret = ptrace_getfpregs(child, datap); break; case PTRACE_SETFPREGS: - ret = ptrace_setfpregs(child, (void __user *)data); + ret = ptrace_setfpregs(child, datap); break; #ifdef CONFIG_IWMMXT case PTRACE_GETWMMXREGS: - ret = ptrace_getwmmxregs(child, (void __user *)data); + ret = ptrace_getwmmxregs(child, datap); break; case PTRACE_SETWMMXREGS: - ret = ptrace_setwmmxregs(child, (void __user *)data); + ret = ptrace_setwmmxregs(child, datap); break; #endif case PTRACE_GET_THREAD_AREA: ret = put_user(task_thread_info(child)->tp_value, - (unsigned long __user *) data); + datap); break; case PTRACE_SET_SYSCALL: @@ -1126,21 +1128,21 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) #ifdef CONFIG_CRUNCH case PTRACE_GETCRUNCHREGS: - ret = ptrace_getcrunchregs(child, (void __user *)data); + ret = ptrace_getcrunchregs(child, datap); break; case PTRACE_SETCRUNCHREGS: - ret = ptrace_setcrunchregs(child, (void __user *)data); + ret = ptrace_setcrunchregs(child, datap); break; #endif #ifdef CONFIG_VFP case PTRACE_GETVFPREGS: - ret = ptrace_getvfpregs(child, (void __user *)data); + ret = ptrace_getvfpregs(child, datap); break; case PTRACE_SETVFPREGS: - ret = ptrace_setvfpregs(child, (void __user *)data); + ret = ptrace_setvfpregs(child, datap); break; #endif diff --git a/arch/arm/mach-imx/include/mach/dma-v1.h b/arch/arm/mach-imx/include/mach/dma-v1.h index 287431cc13e5..ac6fd713828a 100644 --- a/arch/arm/mach-imx/include/mach/dma-v1.h +++ b/arch/arm/mach-imx/include/mach/dma-v1.h @@ -27,6 +27,8 @@ #define imx_has_dma_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) +#include <mach/dma.h> + #define IMX_DMA_CHANNELS 16 #define DMA_MODE_READ 0 @@ -96,12 +98,6 @@ int imx_dma_request(int channel, const char *name); void imx_dma_free(int channel); -enum imx_dma_prio { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -}; - int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio); #endif /* __MACH_DMA_V1_H__ */ diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 86e86c1300d5..2ff3f661a48e 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -311,7 +311,6 @@ static struct soc_camera_link iclink_mt9v022 = { .bus_id = 0, /* Must match with the camera ID */ .board_info = &pcm037_i2c_camera[1], .i2c_adapter_id = 2, - .module_name = "mt9v022", }; static struct soc_camera_link iclink_mt9t031 = { @@ -319,7 +318,6 @@ static struct soc_camera_link iclink_mt9t031 = { .power = pcm037_camera_power, .board_info = &pcm037_i2c_camera[0], .i2c_adapter_id = 2, - .module_name = "mt9t031", }; static struct i2c_board_info pcm037_i2c_devices[] = { diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 0551eb39d97e..18069cb7d068 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -179,7 +179,6 @@ static struct soc_camera_link base_iclink = { .reset = marxbot_basecam_reset, .board_info = &marxbot_i2c_devices[0], .i2c_adapter_id = 0, - .module_name = "mt9t031", }; static struct platform_device marxbot_camera[] = { diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c index 417757e78c65..04760a53005a 100644 --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c @@ -88,7 +88,6 @@ static struct soc_camera_link base_iclink = { .reset = smartbot_cam_reset, .board_info = &smartbot_i2c_devices[0], .i2c_adapter_id = 0, - .module_name = "mt9t031", }; static struct platform_device smartbot_camera[] = { diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 7352412e4917..60e51bcf53bd 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -108,6 +108,10 @@ obj-y += $(iommu-m) $(iommu-y) i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) +ifneq ($(CONFIG_TIDSPBRIDGE),) +obj-y += dsp.o +endif + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 69a4ae971e41..df5a425a49d1 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -269,9 +269,14 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev) struct omap_mmc_platform_data *pdata = dev->platform_data; /* Setting MMC1 Card detect Irq */ - if (pdev->id == 0) + if (pdev->id == 0) { + ret = twl6030_mmc_card_detect_config(); + if (ret) + pr_err("Failed configuring MMC1 card detect\n"); pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE + MMCDETECT_INTR_OFFSET; + pdata->slots[0].card_detect = twl6030_mmc_card_detect; + } return ret; } diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 702f2a63f2c1..1ecd0a6cefb7 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -160,10 +160,19 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev) struct platform_device, dev); struct omap_mmc_platform_data *pdata = dev->platform_data; + if (!pdata) { + dev_err(dev, "%s: NULL platform data\n", __func__); + return -EINVAL; + } /* Setting MMC1 Card detect Irq */ - if (pdev->id == 0) - pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE + - MMCDETECT_INTR_OFFSET; + if (pdev->id == 0) { + ret = twl6030_mmc_card_detect_config(); + if (ret) + dev_err(dev, "%s: Error card detect config(%d)\n", + __func__, ret); + else + pdata->slots[0].card_detect = twl6030_mmc_card_detect; + } return ret; } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c new file mode 100644 index 000000000000..6feeeae6c21b --- /dev/null +++ b/arch/arm/mach-omap2/dsp.c @@ -0,0 +1,85 @@ +/* + * TI's OMAP DSP platform device registration + * + * Copyright (C) 2005-2006 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include "prm.h" +#include "cm.h" +#ifdef CONFIG_BRIDGE_DVFS +#include <plat/omap-pm.h> +#endif + +#include <plat/dsp.h> + +extern phys_addr_t omap_dsp_get_mempool_base(void); + +static struct platform_device *omap_dsp_pdev; + +static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { +#ifdef CONFIG_BRIDGE_DVFS + .dsp_set_min_opp = omap_pm_dsp_set_min_opp, + .dsp_get_opp = omap_pm_dsp_get_opp, + .cpu_set_freq = omap_pm_cpu_set_freq, + .cpu_get_freq = omap_pm_cpu_get_freq, +#endif + .dsp_prm_read = prm_read_mod_reg, + .dsp_prm_write = prm_write_mod_reg, + .dsp_prm_rmw_bits = prm_rmw_mod_reg_bits, + .dsp_cm_read = cm_read_mod_reg, + .dsp_cm_write = cm_write_mod_reg, + .dsp_cm_rmw_bits = cm_rmw_mod_reg_bits, +}; + +static int __init omap_dsp_init(void) +{ + struct platform_device *pdev; + int err = -ENOMEM; + struct omap_dsp_platform_data *pdata = &omap_dsp_pdata; + + pdata->phys_mempool_base = omap_dsp_get_mempool_base(); + + if (pdata->phys_mempool_base) { + pdata->phys_mempool_size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; + pr_info("%s: %x bytes @ %x\n", __func__, + pdata->phys_mempool_size, pdata->phys_mempool_base); + } + + pdev = platform_device_alloc("omap-dsp", -1); + if (!pdev) + goto err_out; + + err = platform_device_add_data(pdev, pdata, sizeof(*pdata)); + if (err) + goto err_out; + + err = platform_device_add(pdev); + if (err) + goto err_out; + + omap_dsp_pdev = pdev; + return 0; + +err_out: + platform_device_put(pdev); + return err; +} +module_init(omap_dsp_init); + +static void __exit omap_dsp_exit(void) +{ + platform_device_unregister(omap_dsp_pdev); +} +module_exit(omap_dsp_exit); + +MODULE_AUTHOR("Hiroshi DOYU"); +MODULE_DESCRIPTION("TI's OMAP DSP platform device registration"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index ab48bb81b570..ed0dbfdb22ed 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1015,7 +1015,6 @@ static struct soc_camera_link iclink = { .power = em_x270_sensor_power, .board_info = &em_x270_i2c_cam_info[0], .i2c_adapter_id = 0, - .module_name = "mt9m111", }; static struct platform_device em_x270_camera = { diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 80a9352d43f3..142c711f4cda 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -755,7 +755,6 @@ static struct soc_camera_link a780_iclink = { .flags = SOCAM_SENSOR_INVERT_PCLK, .i2c_adapter_id = 0, .board_info = &a780_camera_i2c_board_info, - .module_name = "mt9m111", .power = a780_camera_power, .reset = a780_camera_reset, }; @@ -1024,7 +1023,6 @@ static struct soc_camera_link a910_iclink = { .bus_id = 0, .i2c_adapter_id = 0, .board_info = &a910_camera_i2c_board_info, - .module_name = "mt9m111", .power = a910_camera_power, .reset = a910_camera_reset, }; diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 0c31fabfc7fd..f5fb915e1315 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -711,7 +711,6 @@ static struct soc_camera_link iclink = { .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */ .board_info = &mioa701_i2c_devices[0], .i2c_adapter_id = 0, - .module_name = "mt9m111", }; struct i2c_pxa_platform_data i2c_pdata = { diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index f56ae1008759..f33647a8e0b7 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -453,7 +453,6 @@ static struct soc_camera_link iclink[] = { .query_bus_param = pcm990_camera_query_bus_param, .set_bus_param = pcm990_camera_set_bus_param, .free_bus = pcm990_camera_free_bus, - .module_name = "mt9v022", }, { .bus_id = 0, /* Must match with the camera ID */ .board_info = &pcm990_camera_i2c[1], @@ -461,7 +460,6 @@ static struct soc_camera_link iclink[] = { .query_bus_param = pcm990_camera_query_bus_param, .set_bus_param = pcm990_camera_set_bus_param, .free_bus = pcm990_camera_free_bus, - .module_name = "mt9m001", }, }; diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 1e4d78af7d84..546db5cb8929 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -185,6 +185,7 @@ config SMDK6410_WM1192_EV1 select REGULATOR_WM831X select S3C24XX_GPIO_EXTRA64 select MFD_WM831X + select MFD_WM831X_I2C help The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC daughtercard for the Samsung SMDK6410 reference platform. diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 14923989ea05..22a2b44ddb7b 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -235,6 +235,18 @@ static struct platform_device smc911x_device = { }, }; +/* + * The card detect pin of the top SD/MMC slot (CN7) is active low and is + * connected to GPIO A22 of SH7372 (GPIO_PORT41). + */ +static int slot_cn7_get_cd(struct platform_device *pdev) +{ + if (gpio_is_valid(GPIO_PORT41)) + return !gpio_get_value(GPIO_PORT41); + else + return -ENXIO; +} + /* SH_MMCIF */ static struct resource sh_mmcif_resources[] = { [0] = { @@ -261,6 +273,7 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, + .get_cd = slot_cn7_get_cd, }; static struct platform_device sh_mmcif_device = { @@ -310,6 +323,8 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_ocr_mask = MMC_VDD_165_195, .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_caps = MMC_CAP_NEEDS_POLL, + .get_cd = slot_cn7_get_cd, }; static struct resource sdhi1_resources[] = { @@ -948,6 +963,10 @@ static void __init ap4evb_init(void) gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */ gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */ + /* card detect pin for MMC slot (CN7) */ + gpio_request(GPIO_PORT41, NULL); + gpio_direction_input(GPIO_PORT41); + /* set SPU2 clock to 119.6 MHz */ clk = clk_get(NULL, "spu_clk"); if (!IS_ERR(clk)) { diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index 2f420210d406..9057d6fd1d31 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -28,7 +28,6 @@ #include <linux/cnt32_to_63.h> #include <asm/mach/time.h> -#include <asm/mach/time.h> #include <asm/localtimer.h> #include <mach/iomap.h> diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index cbbe69a76a7c..4a94be3304b9 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -208,35 +208,25 @@ static struct resource dma40_resources[] = { /* Default configuration for physcial memcpy */ struct stedma40_chan_cfg dma40_memcpy_conf_phy = { - .channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE | - STEDMA40_LOW_PRIORITY_CHANNEL | - STEDMA40_PCHAN_BASIC_MODE), + .mode = STEDMA40_MODE_PHYSICAL, .dir = STEDMA40_MEM_TO_MEM, - .src_info.endianess = STEDMA40_LITTLE_ENDIAN, .src_info.data_width = STEDMA40_BYTE_WIDTH, .src_info.psize = STEDMA40_PSIZE_PHY_1, .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - .dst_info.endianess = STEDMA40_LITTLE_ENDIAN, .dst_info.data_width = STEDMA40_BYTE_WIDTH, .dst_info.psize = STEDMA40_PSIZE_PHY_1, .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, }; /* Default configuration for logical memcpy */ struct stedma40_chan_cfg dma40_memcpy_conf_log = { - .channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE | - STEDMA40_LOW_PRIORITY_CHANNEL | - STEDMA40_LCHAN_SRC_LOG_DST_LOG | - STEDMA40_NO_TIM_FOR_LINK), .dir = STEDMA40_MEM_TO_MEM, - .src_info.endianess = STEDMA40_LITTLE_ENDIAN, .src_info.data_width = STEDMA40_BYTE_WIDTH, .src_info.psize = STEDMA40_PSIZE_LOG_1, .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - .dst_info.endianess = STEDMA40_LITTLE_ENDIAN, .dst_info.data_width = STEDMA40_BYTE_WIDTH, .dst_info.psize = STEDMA40_PSIZE_LOG_1, .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, @@ -269,7 +259,6 @@ static struct stedma40_platform_data dma40_plat_data = { .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), .memcpy_conf_phy = &dma40_memcpy_conf_phy, .memcpy_conf_log = &dma40_memcpy_conf_log, - .llis_per_log = 8, .disabled_channels = {-1}, }; diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index c00f119babbf..c435fd9e1da9 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -89,7 +89,7 @@ void __kunmap_atomic(void *kvaddr) int idx, type; if (kvaddr >= (void *)FIXADDR_START) { - type = kmap_atomic_idx_pop(); + type = kmap_atomic_idx(); idx = type + KM_TYPE_NR * smp_processor_id(); if (cache_is_vivt()) @@ -101,6 +101,7 @@ void __kunmap_atomic(void *kvaddr) #else (void) idx; /* to kill a warning */ #endif + kmap_atomic_idx_pop(); } else if (vaddr >= PKMAP_ADDR(0) && vaddr < PKMAP_ADDR(LAST_PKMAP)) { /* this address was obtained through kmap_high_get() */ kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)])); diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h new file mode 100644 index 000000000000..ef7751546f5f --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/dma.h @@ -0,0 +1,67 @@ +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_DMA_H__ +#define __ASM_ARCH_MXC_DMA_H__ + +#include <linux/scatterlist.h> +#include <linux/device.h> +#include <linux/dmaengine.h> + +/* + * This enumerates peripheral types. Used for SDMA. + */ +enum sdma_peripheral_type { + IMX_DMATYPE_SSI, /* MCU domain SSI */ + IMX_DMATYPE_SSI_SP, /* Shared SSI */ + IMX_DMATYPE_MMC, /* MMC */ + IMX_DMATYPE_SDHC, /* SDHC */ + IMX_DMATYPE_UART, /* MCU domain UART */ + IMX_DMATYPE_UART_SP, /* Shared UART */ + IMX_DMATYPE_FIRI, /* FIRI */ + IMX_DMATYPE_CSPI, /* MCU domain CSPI */ + IMX_DMATYPE_CSPI_SP, /* Shared CSPI */ + IMX_DMATYPE_SIM, /* SIM */ + IMX_DMATYPE_ATA, /* ATA */ + IMX_DMATYPE_CCM, /* CCM */ + IMX_DMATYPE_EXT, /* External peripheral */ + IMX_DMATYPE_MSHC, /* Memory Stick Host Controller */ + IMX_DMATYPE_MSHC_SP, /* Shared Memory Stick Host Controller */ + IMX_DMATYPE_DSP, /* DSP */ + IMX_DMATYPE_MEMORY, /* Memory */ + IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */ + IMX_DMATYPE_SPDIF, /* SPDIF */ + IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */ + IMX_DMATYPE_ASRC, /* ASRC */ + IMX_DMATYPE_ESAI, /* ESAI */ +}; + +enum imx_dma_prio { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MEDIUM = 1, + DMA_PRIO_LOW = 2 +}; + +struct imx_dma_data { + int dma_request; /* DMA request line */ + enum sdma_peripheral_type peripheral_type; + int priority; +}; + +static inline int imx_dma_is_ipu(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ipu-core"); +} + +static inline int imx_dma_is_general_purpose(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "imx-sdma") || + !strcmp(dev_name(chan->device->dev), "imx-dma"); +} + +#endif diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h new file mode 100644 index 000000000000..9be112227ac4 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/sdma.h @@ -0,0 +1,17 @@ +#ifndef __MACH_MXC_SDMA_H__ +#define __MACH_MXC_SDMA_H__ + +/** + * struct sdma_platform_data - platform specific data for SDMA engine + * + * @sdma_version The version of this SDMA engine + * @cpu_name used to generate the firmware name + * @to_version CPU Tape out version + */ +struct sdma_platform_data { + int sdma_version; + char *cpu_name; + int to_version; +}; + +#endif /* __MACH_MXC_SDMA_H__ */ diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index 5fbde4b8dc12..74b62f10d07f 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -1,10 +1,8 @@ /* - * arch/arm/plat-nomadik/include/plat/ste_dma40.h - * - * Copyright (C) ST-Ericsson 2007-2010 + * Copyright (C) ST-Ericsson SA 2007-2010 + * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson * License terms: GNU General Public License (GPL) version 2 - * Author: Per Friden <per.friden@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> */ @@ -14,43 +12,25 @@ #include <linux/dmaengine.h> #include <linux/workqueue.h> #include <linux/interrupt.h> -#include <linux/dmaengine.h> /* dev types for memcpy */ #define STEDMA40_DEV_DST_MEMORY (-1) #define STEDMA40_DEV_SRC_MEMORY (-1) -/* - * Description of bitfields of channel_type variable is available in - * the info structure. - */ +enum stedma40_mode { + STEDMA40_MODE_LOGICAL = 0, + STEDMA40_MODE_PHYSICAL, + STEDMA40_MODE_OPERATION, +}; -/* Priority */ -#define STEDMA40_INFO_PRIO_TYPE_POS 2 -#define STEDMA40_HIGH_PRIORITY_CHANNEL (0x1 << STEDMA40_INFO_PRIO_TYPE_POS) -#define STEDMA40_LOW_PRIORITY_CHANNEL (0x2 << STEDMA40_INFO_PRIO_TYPE_POS) - -/* Mode */ -#define STEDMA40_INFO_CH_MODE_TYPE_POS 6 -#define STEDMA40_CHANNEL_IN_PHY_MODE (0x1 << STEDMA40_INFO_CH_MODE_TYPE_POS) -#define STEDMA40_CHANNEL_IN_LOG_MODE (0x2 << STEDMA40_INFO_CH_MODE_TYPE_POS) -#define STEDMA40_CHANNEL_IN_OPER_MODE (0x3 << STEDMA40_INFO_CH_MODE_TYPE_POS) - -/* Mode options */ -#define STEDMA40_INFO_CH_MODE_OPT_POS 8 -#define STEDMA40_PCHAN_BASIC_MODE (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS) -#define STEDMA40_PCHAN_MODULO_MODE (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS) -#define STEDMA40_PCHAN_DOUBLE_DST_MODE (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS) -#define STEDMA40_LCHAN_SRC_PHY_DST_LOG (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS) -#define STEDMA40_LCHAN_SRC_LOG_DST_PHS (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS) -#define STEDMA40_LCHAN_SRC_LOG_DST_LOG (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS) - -/* Interrupt */ -#define STEDMA40_INFO_TIM_POS 10 -#define STEDMA40_NO_TIM_FOR_LINK (0x0 << STEDMA40_INFO_TIM_POS) -#define STEDMA40_TIM_FOR_LINK (0x1 << STEDMA40_INFO_TIM_POS) - -/* End of channel_type configuration */ +enum stedma40_mode_opt { + STEDMA40_PCHAN_BASIC_MODE = 0, + STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, + STEDMA40_PCHAN_MODULO_MODE, + STEDMA40_PCHAN_DOUBLE_DST_MODE, + STEDMA40_LCHAN_SRC_PHY_DST_LOG, + STEDMA40_LCHAN_SRC_LOG_DST_PHY, +}; #define STEDMA40_ESIZE_8_BIT 0x0 #define STEDMA40_ESIZE_16_BIT 0x1 @@ -73,16 +53,14 @@ #define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 #define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 +/* Maximum number of possible physical channels */ +#define STEDMA40_MAX_PHYS 32 + enum stedma40_flow_ctrl { STEDMA40_NO_FLOW_CTRL, STEDMA40_FLOW_CTRL, }; -enum stedma40_endianess { - STEDMA40_LITTLE_ENDIAN, - STEDMA40_BIG_ENDIAN -}; - enum stedma40_periph_data_width { STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, @@ -90,15 +68,8 @@ enum stedma40_periph_data_width { STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT }; -struct stedma40_half_channel_info { - enum stedma40_endianess endianess; - enum stedma40_periph_data_width data_width; - int psize; - enum stedma40_flow_ctrl flow_ctrl; -}; - enum stedma40_xfer_dir { - STEDMA40_MEM_TO_MEM, + STEDMA40_MEM_TO_MEM = 1, STEDMA40_MEM_TO_PERIPH, STEDMA40_PERIPH_TO_MEM, STEDMA40_PERIPH_TO_PERIPH @@ -106,18 +77,31 @@ enum stedma40_xfer_dir { /** + * struct stedma40_chan_cfg - dst/src channel configuration + * + * @big_endian: true if the src/dst should be read as big endian + * @data_width: Data width of the src/dst hardware + * @p_size: Burst size + * @flow_ctrl: Flow control on/off. + */ +struct stedma40_half_channel_info { + bool big_endian; + enum stedma40_periph_data_width data_width; + int psize; + enum stedma40_flow_ctrl flow_ctrl; +}; + +/** * struct stedma40_chan_cfg - Structure to be filled by client drivers. * * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH - * @channel_type: priority, mode, mode options and interrupt configuration. + * @high_priority: true if high-priority + * @mode: channel mode: physical, logical, or operation + * @mode_opt: options for the chosen channel mode * @src_dev_type: Src device type * @dst_dev_type: Dst device type * @src_info: Parameters for dst half channel * @dst_info: Parameters for dst half channel - * @pre_transfer_data: Data to be passed on to the pre_transfer() function. - * @pre_transfer: Callback used if needed before preparation of transfer. - * Only called if device is set. size of bytes to transfer - * (in case of multiple element transfer size is size of the first element). * * * This structure has to be filled by the client drivers. @@ -126,15 +110,13 @@ enum stedma40_xfer_dir { */ struct stedma40_chan_cfg { enum stedma40_xfer_dir dir; - unsigned int channel_type; + bool high_priority; + enum stedma40_mode mode; + enum stedma40_mode_opt mode_opt; int src_dev_type; int dst_dev_type; struct stedma40_half_channel_info src_info; struct stedma40_half_channel_info dst_info; - void *pre_transfer_data; - int (*pre_transfer) (struct dma_chan *chan, - void *data, - int size); }; /** @@ -147,7 +129,6 @@ struct stedma40_chan_cfg { * @memcpy_len: length of memcpy * @memcpy_conf_phy: default configuration of physical channel memcpy * @memcpy_conf_log: default configuration of logical channel memcpy - * @llis_per_log: number of max linked list items per logical channel * @disabled_channels: A vector, ending with -1, that marks physical channels * that are for different reasons not available for the driver. */ @@ -159,23 +140,10 @@ struct stedma40_platform_data { u32 memcpy_len; struct stedma40_chan_cfg *memcpy_conf_phy; struct stedma40_chan_cfg *memcpy_conf_log; - unsigned int llis_per_log; - int disabled_channels[8]; + int disabled_channels[STEDMA40_MAX_PHYS]; }; -/** - * setdma40_set_psize() - Used for changing the package size of an - * already configured dma channel. - * - * @chan: dmaengine handle - * @src_psize: new package side for src. (STEDMA40_PSIZE*) - * @src_psize: new package side for dst. (STEDMA40_PSIZE*) - * - * returns 0 on ok, otherwise negative error number. - */ -int stedma40_set_psize(struct dma_chan *chan, - int src_psize, - int dst_psize); +#ifdef CONFIG_STE_DMA40 /** * stedma40_filter() - Provides stedma40_chan_cfg to the @@ -238,4 +206,21 @@ dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, direction, flags); } +#else +static inline bool stedma40_filter(struct dma_chan *chan, void *data) +{ + return false; +} + +static inline struct +dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, + dma_addr_t addr, + unsigned int size, + enum dma_data_direction direction, + unsigned long flags) +{ + return NULL; +} +#endif + #endif diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 221a675ebbae..f04731820301 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -19,6 +19,7 @@ #include <plat/common.h> #include <plat/board.h> #include <plat/vram.h> +#include <plat/dsp.h> #define NO_LENGTH_CHECK 0xffffffff @@ -64,4 +65,5 @@ void __init omap_reserve(void) { omapfb_reserve_sdram_memblock(); omap_vram_reserve_sdram_memblock(); + omap_dsp_reserve_sdram_memblock(); } diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 1e2383eae638..6f42a18b8aa4 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/memblock.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -231,6 +232,75 @@ static void omap_init_uwire(void) static inline void omap_init_uwire(void) {} #endif +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) + +static struct resource wdt_resources[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_wdt_device = { + .name = "omap_wdt", + .id = -1, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void omap_init_wdt(void) +{ + if (cpu_is_omap16xx()) + wdt_resources[0].start = 0xfffeb000; + else if (cpu_is_omap2420()) + wdt_resources[0].start = 0x48022000; /* WDT2 */ + else if (cpu_is_omap2430()) + wdt_resources[0].start = 0x49016000; /* WDT2 */ + else if (cpu_is_omap343x()) + wdt_resources[0].start = 0x48314000; /* WDT2 */ + else if (cpu_is_omap44xx()) + wdt_resources[0].start = 0x4a314000; + else + return; + + wdt_resources[0].end = wdt_resources[0].start + 0x4f; + + (void) platform_device_register(&omap_wdt_device); +} +#else +static inline void omap_init_wdt(void) {} +#endif + +#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE) + +static phys_addr_t omap_dsp_phys_mempool_base; + +void __init omap_dsp_reserve_sdram_memblock(void) +{ + phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; + phys_addr_t paddr; + + if (!size) + return; + + paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT); + if (!paddr) { + pr_err("%s: failed to reserve %x bytes\n", + __func__, size); + return; + } + + omap_dsp_phys_mempool_base = paddr; +} + +phys_addr_t omap_dsp_get_mempool_base(void) +{ + return omap_dsp_phys_mempool_base; +} +EXPORT_SYMBOL(omap_dsp_get_mempool_base); +#endif + /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h new file mode 100644 index 000000000000..9c604b390f9f --- /dev/null +++ b/arch/arm/plat-omap/include/plat/dsp.h @@ -0,0 +1,31 @@ +#ifndef __OMAP_DSP_H__ +#define __OMAP_DSP_H__ + +#include <linux/types.h> + +struct omap_dsp_platform_data { + void (*dsp_set_min_opp) (u8 opp_id); + u8 (*dsp_get_opp) (void); + void (*cpu_set_freq) (unsigned long f); + unsigned long (*cpu_get_freq) (void); + unsigned long mpu_speed[6]; + + /* functions to write and read PRCM registers */ + void (*dsp_prm_write)(u32, s16 , u16); + u32 (*dsp_prm_read)(s16 , u16); + u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16); + void (*dsp_cm_write)(u32, s16 , u16); + u32 (*dsp_cm_read)(s16 , u16); + u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16); + + phys_addr_t phys_mempool_base; + phys_addr_t phys_mempool_size; +}; + +#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE) +extern void omap_dsp_reserve_sdram_memblock(void); +#else +static inline void omap_dsp_reserve_sdram_memblock(void) { } +#endif + +#endif diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h new file mode 100644 index 000000000000..e49c5b6fc4e2 --- /dev/null +++ b/arch/arm/plat-pxa/include/plat/sdhci.h @@ -0,0 +1,32 @@ +/* linux/arch/arm/plat-pxa/include/plat/sdhci.h + * + * Copyright 2010 Marvell + * Zhangfei Gao <zhangfei.gao@marvell.com> + * + * PXA Platform - SDHCI platform data definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_PXA_SDHCI_H +#define __PLAT_PXA_SDHCI_H + +/* pxa specific flag */ +/* Require clock free running */ +#define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0) + +/* + * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI + * @max_speed: the maximum speed supported + * @quirks: quirks of specific device + * @flags: flags for platform requirement + */ +struct sdhci_pxa_platdata { + unsigned int max_speed; + unsigned int quirks; + unsigned int flags; +}; + +#endif /* __PLAT_PXA_SDHCI_H */ |