diff options
Diffstat (limited to 'arch/arm')
121 files changed, 7226 insertions, 2799 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 64ae22c4fce7..82936f63cf16 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -571,6 +571,7 @@ config ARCH_LPC32XX select USB_ARCH_HAS_OHCI select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS + select USE_OF help Support for the NXP LPC32XX family of processors @@ -606,6 +607,7 @@ config ARCH_MMP select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select GPIO_PXA + select IRQ_DOMAIN select PLAT_PXA select SPARSE_IRQ select GENERIC_ALLOCATOR diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi new file mode 100644 index 000000000000..f449efc9825f --- /dev/null +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -0,0 +1,273 @@ +/* + * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>, + * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91SAM9260 family SoC"; + compatible = "atmel,at91sam9260"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + serial5 = &usart4; + serial6 = &usart5; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory { + reg = <0x20000000 0x04000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <2>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + }; + + ramc0: ramc@ffffea00 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffea00 0x200>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + }; + + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + }; + + pit: timer@fffffd30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffd30 0xf>; + interrupts = <1 4>; + }; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <17 4 18 4 19 4>; + }; + + tcb1: timer@fffdc000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffdc000 0x100>; + interrupts = <26 4 27 4 28 4>; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <4 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 4>; + status = "disabled"; + }; + + usart0: serial@fffb0000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb0000 0x200>; + interrupts = <6 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart1: serial@fffb4000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb4000 0x200>; + interrupts = <7 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart2: serial@fffb8000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb8000 0x200>; + interrupts = <8 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart3: serial@fffd0000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffd0000 0x200>; + interrupts = <23 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart4: serial@fffd4000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffd4000 0x200>; + interrupts = <24 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart5: serial@fffd8000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffd8000 0x200>; + interrupts = <25 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + macb0: ethernet@fffc4000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xfffc4000 0x100>; + interrupts = <21 4>; + status = "disabled"; + }; + + usb1: gadget@fffa4000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfffa4000 0x4000>; + interrupts = <10 4>; + status = "disabled"; + }; + + adc0: adc@fffe0000 { + compatible = "atmel,at91sam9260-adc"; + reg = <0xfffe0000 0x100>; + interrupts = <5 4>; + atmel,adc-use-external-triggers; + atmel,adc-channels-used = <0xf>; + atmel,adc-vref = <3300>; + atmel,adc-num-channels = <4>; + atmel,adc-startup-time = <15>; + atmel,adc-channel-base = <0x30>; + atmel,adc-drdy-mask = <0x10000>; + atmel,adc-status-register = <0x1c>; + atmel,adc-trigger-register = <0x04>; + + trigger@0 { + trigger-name = "timer-counter-0"; + trigger-value = <0x1>; + }; + trigger@1 { + trigger-name = "timer-counter-1"; + trigger-value = <0x3>; + }; + + trigger@2 { + trigger-name = "timer-counter-2"; + trigger-value = <0x5>; + }; + + trigger@3 { + trigger-name = "external"; + trigger-value = <0x13>; + trigger-external; + }; + }; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000 + 0xffffe800 0x200 + >; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + gpios = <&pioC 13 0 + &pioC 14 0 + 0 + >; + status = "disabled"; + }; + + usb0: ohci@00500000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00500000 0x100000>; + interrupts = <20 4>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 23 0 /* sda */ + &pioA 24 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi new file mode 100644 index 000000000000..0209913a65a2 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -0,0 +1,220 @@ +/* + * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 only. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91SAM9263 family SoC"; + compatible = "atmel,at91sam9263"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + gpio4 = &pioE; + tcb0 = &tcb0; + }; + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory { + reg = <0x20000000 0x08000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <2>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + ramc: ramc@ffffe200 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffe200 0x200 + 0xffffe800 0x200>; + }; + + pit: timer@fffffd30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffd30 0xf>; + interrupts = <1 4>; + }; + + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfff7c000 0x100>; + interrupts = <19 4>; + }; + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + }; + + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <4 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <4 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <4 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + dbgu: serial@ffffee00 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xffffee00 0x200>; + interrupts = <1 4>; + status = "disabled"; + }; + + usart0: serial@fff8c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff8c000 0x200>; + interrupts = <7 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart1: serial@fff90000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff90000 0x200>; + interrupts = <8 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart2: serial@fff94000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff94000 0x200>; + interrupts = <9 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + macb0: ethernet@fffbc000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xfffbc000 0x100>; + interrupts = <21 4>; + status = "disabled"; + }; + + usb1: gadget@fff78000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfff78000 0x4000>; + interrupts = <24 4>; + status = "disabled"; + }; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000 + 0xffffe000 0x200 + >; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + gpios = <&pioA 22 0 + &pioD 15 0 + 0 + >; + status = "disabled"; + }; + + usb0: ohci@00a00000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00a00000 0x100000>; + interrupts = <29 4>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioB 4 0 /* sda */ + &pioB 5 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts new file mode 100644 index 000000000000..f86ac4b609fc --- /dev/null +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -0,0 +1,156 @@ +/* + * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +/include/ "at91sam9263.dtsi" + +/ { + model = "Atmel at91sam9263ek"; + compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <16367660>; + }; + }; + + ahb { + apb { + dbgu: serial@ffffee00 { + status = "okay"; + }; + + usart0: serial@fff8c000 { + status = "okay"; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fff78000 { + atmel,vbus-gpio = <&pioA 25 0>; + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt = <1>; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + + usb0: ohci@00a00000 { + num-ports = <2>; + status = "okay"; + atmel,vbus-gpio = <&pioA 24 0 + &pioA 21 0 + >; + }; + }; + + leds { + compatible = "gpio-leds"; + + d3 { + label = "d3"; + gpios = <&pioB 7 0>; + linux,default-trigger = "heartbeat"; + }; + + d2 { + label = "d2"; + gpios = <&pioC 29 1>; + linux,default-trigger = "nand-disk"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + left_click { + label = "left_click"; + gpios = <&pioC 5 1>; + linux,code = <272>; + gpio-key,wakeup; + }; + + right_click { + label = "right_click"; + gpios = <&pioC 4 1>; + linux,code = <273>; + gpio-key,wakeup; + }; + }; + + i2c@0 { + status = "okay"; + + 24c512@50 { + compatible = "24c512"; + reg = <0x50>; + pagesize = <128>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 773ef484037a..2a1d1ca8bd86 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -1,238 +1,26 @@ /* * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC * - * Copyright (C) 2011 Atmel, - * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>, - * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * - * Licensed under GPLv2 or later. + * Licensed under GPLv2. */ -/include/ "skeleton.dtsi" +/include/ "at91sam9260.dtsi" / { model = "Atmel AT91SAM9G20 family SoC"; compatible = "atmel,at91sam9g20"; - interrupt-parent = <&aic>; - - aliases { - serial0 = &dbgu; - serial1 = &usart0; - serial2 = &usart1; - serial3 = &usart2; - serial4 = &usart3; - serial5 = &usart4; - serial6 = &usart5; - gpio0 = &pioA; - gpio1 = &pioB; - gpio2 = &pioC; - tcb0 = &tcb0; - tcb1 = &tcb1; - }; - cpus { - cpu@0 { - compatible = "arm,arm926ejs"; - }; - }; memory { reg = <0x20000000 0x08000000>; }; ahb { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - apb { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; - compatible = "atmel,at91rm9200-aic"; - interrupt-controller; - reg = <0xfffff000 0x200>; - }; - - ramc0: ramc@ffffea00 { - compatible = "atmel,at91sam9260-sdramc"; - reg = <0xffffea00 0x200>; - }; - - pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; - reg = <0xfffffc00 0x100>; - }; - - rstc@fffffd00 { - compatible = "atmel,at91sam9260-rstc"; - reg = <0xfffffd00 0x10>; - }; - - shdwc@fffffd10 { - compatible = "atmel,at91sam9260-shdwc"; - reg = <0xfffffd10 0x10>; - }; - - pit: timer@fffffd30 { - compatible = "atmel,at91sam9260-pit"; - reg = <0xfffffd30 0xf>; - interrupts = <1 4>; - }; - - tcb0: timer@fffa0000 { - compatible = "atmel,at91rm9200-tcb"; - reg = <0xfffa0000 0x100>; - interrupts = <17 4 18 4 19 4>; - }; - - tcb1: timer@fffdc000 { - compatible = "atmel,at91rm9200-tcb"; - reg = <0xfffdc000 0x100>; - interrupts = <26 4 27 4 28 4>; - }; - - pioA: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - }; - - pioB: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <3 4>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - }; - - pioC: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <4 4>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - }; - - dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfffff200 0x200>; - interrupts = <1 4>; - status = "disabled"; - }; - - usart0: serial@fffb0000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfffb0000 0x200>; - interrupts = <6 4>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; - }; - - usart1: serial@fffb4000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfffb4000 0x200>; - interrupts = <7 4>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; - }; - - usart2: serial@fffb8000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfffb8000 0x200>; - interrupts = <8 4>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; - }; - - usart3: serial@fffd0000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfffd0000 0x200>; - interrupts = <23 4>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; - }; - - usart4: serial@fffd4000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfffd4000 0x200>; - interrupts = <24 4>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; - }; - - usart5: serial@fffd8000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfffd8000 0x200>; - interrupts = <25 4>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; - }; - - macb0: ethernet@fffc4000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; - reg = <0xfffc4000 0x100>; - interrupts = <21 4>; - status = "disabled"; - }; - - usb1: gadget@fffa4000 { - compatible = "atmel,at91rm9200-udc"; - reg = <0xfffa4000 0x4000>; - interrupts = <10 4>; - status = "disabled"; + adc0: adc@fffe0000 { + atmel,adc-startup-time = <40>; }; }; - - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000 - 0xffffe800 0x200 - >; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - gpios = <&pioC 13 0 - &pioC 14 0 - 0 - >; - status = "disabled"; - }; - - usb0: ohci@00500000 { - compatible = "atmel,at91rm9200-ohci", "usb-ohci"; - reg = <0x00500000 0x100000>; - interrupts = <20 4>; - status = "disabled"; - }; - }; - - i2c@0 { - compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ - >; - i2c-gpio,sda-open-drain; - i2c-gpio,scl-open-drain; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts new file mode 100644 index 000000000000..e5324bf9d529 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g20ek.dts @@ -0,0 +1,29 @@ +/* + * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9g20ek_common.dtsi" + +/ { + model = "Atmel at91sam9g20ek"; + compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9"; + + leds { + compatible = "gpio-leds"; + + ds1 { + label = "ds1"; + gpios = <&pioA 9 0>; + linux,default-trigger = "heartbeat"; + }; + + ds5 { + label = "ds5"; + gpios = <&pioA 6 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts new file mode 100644 index 000000000000..f1b2e148ac8c --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -0,0 +1,29 @@ +/* + * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9g20ek_common.dtsi" + +/ { + model = "Atmel at91sam9g20ek 2 mmc"; + compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9"; + + leds { + compatible = "gpio-leds"; + + ds1 { + label = "ds1"; + gpios = <&pioB 9 0>; + linux,default-trigger = "heartbeat"; + }; + + ds5 { + label = "ds5"; + gpios = <&pioB 8 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi new file mode 100644 index 000000000000..b06c0db273b1 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -0,0 +1,142 @@ +/* + * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/include/ "at91sam9g20.dtsi" + +/ { + + chosen { + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 0>; + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + i2c@0 { + status = "okay"; + + 24c512@50 { + compatible = "24c512"; + reg = <0x50>; + }; + + wm8731@1b { + compatible = "wm8731"; + reg = <0x1b>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + btn3 { + label = "Buttin 3"; + gpios = <&pioA 30 1>; + linux,code = <0x103>; + gpio-key,wakeup; + }; + + btn4 { + label = "Buttin 4"; + gpios = <&pioA 31 1>; + linux,code = <0x104>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index 14bc30705099..881bc3987844 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -55,83 +55,101 @@ gpio0: gpio@8012e000 { compatible = "stericsson,db8500-gpio", - "stmicroelectronics,nomadik-gpio"; + "st,nomadik-gpio"; reg = <0x8012e000 0x80>; interrupts = <0 119 0x4>; supports-sleepmode; gpio-controller; + #gpio-cells = <2>; + gpio-bank = <0>; }; gpio1: gpio@8012e080 { compatible = "stericsson,db8500-gpio", - "stmicroelectronics,nomadik-gpio"; + "st,nomadik-gpio"; reg = <0x8012e080 0x80>; interrupts = <0 120 0x4>; supports-sleepmode; gpio-controller; + #gpio-cells = <2>; + gpio-bank = <1>; }; gpio2: gpio@8000e000 { compatible = "stericsson,db8500-gpio", - "stmicroelectronics,nomadik-gpio"; + "st,nomadik-gpio"; reg = <0x8000e000 0x80>; interrupts = <0 121 0x4>; supports-sleepmode; gpio-controller; + #gpio-cells = <2>; + gpio-bank = <2>; }; gpio3: gpio@8000e080 { compatible = "stericsson,db8500-gpio", - "stmicroelectronics,nomadik-gpio"; + "st,nomadik-gpio"; reg = <0x8000e080 0x80>; interrupts = <0 122 0x4>; supports-sleepmode; gpio-controller; + #gpio-cells = <2>; + gpio-bank = <3>; }; gpio4: gpio@8000e100 { compatible = "stericsson,db8500-gpio", - "stmicroelectronics,nomadik-gpio"; + "st,nomadik-gpio"; reg = <0x8000e100 0x80>; interrupts = <0 123 0x4>; supports-sleepmode; gpio-controller; + #gpio-cells = <2>; + gpio-bank = <4>; }; gpio5: gpio@8000e180 { compatible = "stericsson,db8500-gpio", - "stmicroelectronics,nomadik-gpio"; + "st,nomadik-gpio"; reg = <0x8000e180 0x80>; interrupts = <0 124 0x4>; supports-sleepmode; gpio-controller; + #gpio-cells = <2>; + gpio-bank = <5>; }; gpio6: gpio@8011e000 { compatible = "stericsson,db8500-gpio", - "stmicroelectronics,nomadik-gpio"; + "st,nomadik-gpio"; reg = <0x8011e000 0x80>; interrupts = <0 125 0x4>; supports-sleepmode; gpio-controller; + #gpio-cells = <2>; + gpio-bank = <6>; }; gpio7: gpio@8011e080 { compatible = "stericsson,db8500-gpio", - "stmicroelectronics,nomadik-gpio"; + "st,nomadik-gpio"; reg = <0x8011e080 0x80>; interrupts = <0 126 0x4>; supports-sleepmode; gpio-controller; + #gpio-cells = <2>; + gpio-bank = <7>; }; gpio8: gpio@a03fe000 { compatible = "stericsson,db8500-gpio", - "stmicroelectronics,nomadik-gpio"; + "st,nomadik-gpio"; reg = <0xa03fe000 0x80>; interrupts = <0 127 0x4>; supports-sleepmode; gpio-controller; + #gpio-cells = <2>; + gpio-bank = <8>; }; usb@a03e0000 { @@ -153,7 +171,13 @@ reg = <0x80157000 0x1000>; interrupts = <46 47>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges; + + prcmu-timer-4@80157450 { + compatible = "stericsson,db8500-prcmu-timer-4"; + reg = <0x80157450 0xC>; + }; ab8500@5 { compatible = "stericsson,ab8500"; @@ -163,7 +187,7 @@ }; i2c@80004000 { - compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; #address-cells = <1>; @@ -171,7 +195,7 @@ }; i2c@80122000 { - compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; #address-cells = <1>; @@ -179,7 +203,7 @@ }; i2c@80128000 { - compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; #address-cells = <1>; @@ -187,7 +211,7 @@ }; i2c@80110000 { - compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; #address-cells = <1>; @@ -195,7 +219,7 @@ }; i2c@8012a000 { - compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; #address-cells = <1>; @@ -270,5 +294,14 @@ interrupts = <0 100 0x4>; status = "disabled"; }; + + external-bus@50000000 { + compatible = "simple-bus"; + reg = <0x50000000 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x4000000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts new file mode 100644 index 000000000000..1ea9d34460a4 --- /dev/null +++ b/arch/arm/boot/dts/ethernut5.dts @@ -0,0 +1,84 @@ +/* + * ethernut5.dts - Device Tree file for Ethernut 5 board + * + * Copyright (C) 2012 egnite GmbH <info@egnite.de> + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9260.dtsi" + +/ { + model = "Ethernut 5"; + compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2"; + }; + + memory { + reg = <0x20000000 0x08000000>; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 0>; + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + gpios = <0 + &pioC 14 0 + 0 + >; + + root@0 { + label = "root"; + reg = <0x0 0x08000000>; + }; + + data@20000 { + label = "data"; + reg = <0x08000000 0x38000000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + i2c@0 { + status = "okay"; + + pcf8563@50 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts new file mode 100644 index 000000000000..e8814fe0e277 --- /dev/null +++ b/arch/arm/boot/dts/kizbox.dts @@ -0,0 +1,138 @@ +/* + * kizbox.dts - Device Tree file for Overkiz Kizbox board + * + * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9g20.dtsi" + +/ { + + model = "Overkiz kizbox"; + compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root"; + }; + + memory { + reg = <0x20000000 0x2000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "mii"; + status = "okay"; + }; + + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + status = "okay"; + + bootloaderkernel@0 { + label = "bootloader-kernel"; + reg = <0x0 0xc0000>; + }; + + ubi@c0000 { + label = "ubi"; + reg = <0xc0000 0x7f40000>; + }; + + }; + + usb0: ohci@00500000 { + num-ports = <1>; + status = "okay"; + }; + }; + + i2c@0 { + status = "okay"; + + pcf8563@51 { + /* nxp pcf8563 rtc */ + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + }; + + leds { + compatible = "gpio-leds"; + + led1g { + label = "led1:green"; + gpios = <&pioB 0 1>; + linux,default-trigger = "none"; + }; + + led1r { + label = "led1:red"; + gpios = <&pioB 1 1>; + linux,default-trigger = "none"; + }; + + led2g { + label = "led2:green"; + gpios = <&pioB 2 1>; + linux,default-trigger = "none"; + default-state = "on"; + }; + + led2r { + label = "led2:red"; + gpios = <&pioB 3 1>; + linux,default-trigger = "none"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + reset { + label = "reset"; + gpios = <&pioB 30 1>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + + mode { + label = "mode"; + gpios = <&pioB 31 1>; + linux,code = <0x101>; + gpio-key,wakeup; + }; + }; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi new file mode 100644 index 000000000000..2d696866f71c --- /dev/null +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -0,0 +1,292 @@ +/* + * NXP LPC32xx SoC + * + * Copyright 2012 Roland Stigge <stigge@antcom.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "nxp,lpc3220"; + interrupt-parent = <&mic>; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x20000000 0x20000000 0x30000000>; + + /* + * Enable either SLC or MLC + */ + slc: flash@20020000 { + compatible = "nxp,lpc3220-slc"; + reg = <0x20020000 0x1000>; + status = "disable"; + }; + + mlc: flash@200B0000 { + compatible = "nxp,lpc3220-mlc"; + reg = <0x200B0000 0x1000>; + status = "disable"; + }; + + dma@31000000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0x31000000 0x1000>; + interrupts = <0x1c 0>; + }; + + /* + * Enable either ohci or usbd (gadget)! + */ + ohci@31020000 { + compatible = "nxp,ohci-nxp", "usb-ohci"; + reg = <0x31020000 0x300>; + interrupts = <0x3b 0>; + status = "disable"; + }; + + usbd@31020000 { + compatible = "nxp,lpc3220-udc"; + reg = <0x31020000 0x300>; + interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + status = "disable"; + }; + + clcd@31040000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0x31040000 0x1000>; + interrupts = <0x0e 0>; + status = "disable"; + }; + + mac: ethernet@31060000 { + compatible = "nxp,lpc-eth"; + reg = <0x31060000 0x1000>; + interrupts = <0x1d 0>; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x20000000 0x20000000 0x30000000>; + + ssp0: ssp@20084000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x20084000 0x1000>; + interrupts = <0x14 0>; + }; + + spi1: spi@20088000 { + compatible = "nxp,lpc3220-spi"; + reg = <0x20088000 0x1000>; + }; + + ssp1: ssp@2008c000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x2008c000 0x1000>; + interrupts = <0x15 0>; + }; + + spi2: spi@20090000 { + compatible = "nxp,lpc3220-spi"; + reg = <0x20090000 0x1000>; + }; + + i2s0: i2s@20094000 { + compatible = "nxp,lpc3220-i2s"; + reg = <0x20094000 0x1000>; + }; + + sd@20098000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x20098000 0x1000>; + interrupts = <0x0f 0>, <0x0d 0>; + }; + + i2s1: i2s@2009C000 { + compatible = "nxp,lpc3220-i2s"; + reg = <0x2009C000 0x1000>; + }; + + uart3: serial@40080000 { + compatible = "nxp,serial"; + reg = <0x40080000 0x1000>; + }; + + uart4: serial@40088000 { + compatible = "nxp,serial"; + reg = <0x40088000 0x1000>; + }; + + uart5: serial@40090000 { + compatible = "nxp,serial"; + reg = <0x40090000 0x1000>; + }; + + uart6: serial@40098000 { + compatible = "nxp,serial"; + reg = <0x40098000 0x1000>; + }; + + i2c1: i2c@400A0000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400A0000 0x100>; + interrupts = <0x33 0>; + #address-cells = <1>; + #size-cells = <0>; + pnx,timeout = <0x64>; + }; + + i2c2: i2c@400A8000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400A8000 0x100>; + interrupts = <0x32 0>; + #address-cells = <1>; + #size-cells = <0>; + pnx,timeout = <0x64>; + }; + + i2cusb: i2c@31020300 { + compatible = "nxp,pnx-i2c"; + reg = <0x31020300 0x100>; + interrupts = <0x3f 0>; + #address-cells = <1>; + #size-cells = <0>; + pnx,timeout = <0x64>; + }; + }; + + fab { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x20000000 0x20000000 0x30000000>; + + /* + * MIC Interrupt controller includes: + * MIC @40008000 + * SIC1 @4000C000 + * SIC2 @40010000 + */ + mic: interrupt-controller@40008000 { + compatible = "nxp,lpc3220-mic"; + interrupt-controller; + reg = <0x40008000 0xC000>; + #interrupt-cells = <2>; + }; + + uart1: serial@40014000 { + compatible = "nxp,serial"; + reg = <0x40014000 0x1000>; + }; + + uart2: serial@40018000 { + compatible = "nxp,serial"; + reg = <0x40018000 0x1000>; + }; + + uart7: serial@4001C000 { + compatible = "nxp,serial"; + reg = <0x4001C000 0x1000>; + }; + + rtc@40024000 { + compatible = "nxp,lpc3220-rtc"; + reg = <0x40024000 0x1000>; + interrupts = <0x34 0>; + }; + + gpio: gpio@40028000 { + compatible = "nxp,lpc3220-gpio"; + reg = <0x40028000 0x1000>; + /* create a private address space for enumeration */ + #address-cells = <1>; + #size-cells = <0>; + + gpio_p0: gpio-bank@0 { + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + }; + + gpio_p1: gpio-bank@1 { + gpio-controller; + #gpio-cells = <2>; + reg = <1>; + }; + + gpio_p2: gpio-bank@2 { + gpio-controller; + #gpio-cells = <2>; + reg = <2>; + }; + + gpio_p3: gpio-bank@3 { + gpio-controller; + #gpio-cells = <2>; + reg = <3>; + }; + + gpi_p3: gpio-bank@4 { + gpio-controller; + #gpio-cells = <2>; + reg = <4>; + }; + + gpo_p3: gpio-bank@5 { + gpio-controller; + #gpio-cells = <2>; + reg = <5>; + }; + }; + + watchdog@4003C000 { + compatible = "nxp,pnx4008-wdt"; + reg = <0x4003C000 0x1000>; + }; + + /* + * TSC vs. ADC: Since those two share the same + * hardware, you need to choose from one of the + * following two and do 'status = "okay";' for one of + * them + */ + + adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupts = <0x27 0>; + status = "disable"; + }; + + tsc@40048000 { + compatible = "nxp,lpc3220-tsc"; + reg = <0x40048000 0x1000>; + interrupts = <0x27 0>; + status = "disable"; + }; + + key@40050000 { + compatible = "nxp,lpc3220-key"; + reg = <0x40050000 0x1000>; + }; + + }; + }; +}; diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts new file mode 100644 index 000000000000..153a4b2d12b5 --- /dev/null +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +/include/ "mmp2.dtsi" + +/ { + model = "Marvell MMP2 Aspenite Development Board"; + compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; + + chosen { + bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; + }; + + memory { + reg = <0x00000000 0x04000000>; + }; + + soc { + apb@d4000000 { + uart3: uart@d4018000 { + status = "okay"; + }; + twsi1: i2c@d4011000 { + status = "okay"; + }; + rtc: rtc@d4010000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi new file mode 100644 index 000000000000..80f74e256408 --- /dev/null +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -0,0 +1,220 @@ +/* + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + i2c0 = &twsi1; + i2c1 = &twsi2; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + axi@d4200000 { /* AXI */ + compatible = "mrvl,axi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4200000 0x00200000>; + ranges; + + intc: interrupt-controller@d4282000 { + compatible = "mrvl,mmp2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + mrvl,intc-nr-irqs = <64>; + }; + + intcmux4@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <4>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + intcmux5: interrupt-controller@d4282154 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <5>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x154 0x4>, <0x16c 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + mrvl,clr-mfp-irq = <1>; + }; + + intcmux9: interrupt-controller@d4282180 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <9>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x180 0x4>, <0x17c 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <3>; + }; + + intcmux17: interrupt-controller@d4282158 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <17>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x158 0x4>, <0x170 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <5>; + }; + + intcmux35: interrupt-controller@d428215c { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <35>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x15c 0x4>, <0x174 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <15>; + }; + + intcmux51: interrupt-controller@d4282160 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <51>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x160 0x4>, <0x178 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + intcmux55: interrupt-controller@d4282188 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <55>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x188 0x4>, <0x184 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + }; + + apb@d4000000 { /* APB */ + compatible = "mrvl,apb-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4000000 0x00200000>; + ranges; + + timer0: timer@d4014000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4014000 0x100>; + interrupts = <13>; + }; + + uart1: uart@d4030000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4030000 0x1000>; + interrupts = <27>; + status = "disabled"; + }; + + uart2: uart@d4017000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4017000 0x1000>; + interrupts = <28>; + status = "disabled"; + }; + + uart3: uart@d4018000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4018000 0x1000>; + interrupts = <24>; + status = "disabled"; + }; + + uart4: uart@d4016000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4016000 0x1000>; + interrupts = <46>; + status = "disabled"; + }; + + gpio@d4019000 { + compatible = "mrvl,mmp-gpio"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4019000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <49>; + interrupt-names = "gpio_mux"; + interrupt-controller; + #interrupt-cells = <1>; + ranges; + + gcb0: gpio@d4019000 { + reg = <0xd4019000 0x4>; + }; + + gcb1: gpio@d4019004 { + reg = <0xd4019004 0x4>; + }; + + gcb2: gpio@d4019008 { + reg = <0xd4019008 0x4>; + }; + + gcb3: gpio@d4019100 { + reg = <0xd4019100 0x4>; + }; + + gcb4: gpio@d4019104 { + reg = <0xd4019104 0x4>; + }; + + gcb5: gpio@d4019108 { + reg = <0xd4019108 0x4>; + }; + }; + + twsi1: i2c@d4011000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4011000 0x1000>; + interrupts = <7>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi2: i2c@d4025000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4025000 0x1000>; + interrupts = <58>; + status = "disabled"; + }; + + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <1 0>; + interrupt-names = "rtc 1Hz", "rtc alarm"; + interrupt-parent = <&intcmux5>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 9f72cd4cf308..8c756be4d7ad 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -18,3 +18,52 @@ reg = <0x80000000 0x20000000>; /* 512 MB */ }; }; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + vsim: regulator@10 { + compatible = "ti,twl4030-vsim"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in the EEPROM + * as EDID data. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + ti,bus-width = <8>; +}; + +&mmc2 { + status = "disable"; +}; + +&mmc3 { + status = "disable"; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index c6121357c1eb..99474fa5fac4 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -69,6 +69,60 @@ reg = <0x48200000 0x1000>; }; + gpio1: gpio@48310000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@49050000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@49052000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@49054000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@49056000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio5"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@49058000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio6"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + uart1: serial@4806a000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; @@ -113,5 +167,53 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + mcspi1: spi@48098000 { + compatible = "ti,omap2-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; + }; + + mcspi2: spi@4809a000 { + compatible = "ti,omap2-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; + ti,spi-num-cs = <2>; + }; + + mcspi3: spi@480b8000 { + compatible = "ti,omap2-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; + ti,spi-num-cs = <2>; + }; + + mcspi4: spi@480ba000 { + compatible = "ti,omap2-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; + ti,spi-num-cs = <1>; + }; + + mmc1: mmc@4809c000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + }; + + mmc3: mmc@480ad000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 9755ad5917f8..e671361bc791 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -17,4 +17,75 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "pandaboard::status1"; + gpios = <&gpio1 7 0>; + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "pandaboard::status2"; + gpios = <&gpio1 8 0>; + linux,default-trigger = "mmc0"; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in their EEPROM as EDID data. + * The EEPROM is connected as I2C slave device. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + ti,bus-width = <8>; +}; + +&mmc2 { + status = "disable"; +}; + +&mmc3 { + status = "disable"; +}; + +&mmc4 { + status = "disable"; +}; + +&mmc5 { + ti,non-removable; + ti,bus-width = <4>; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 63c6b2b2bf42..e5eeb6f9c6e6 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -17,4 +17,144 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; + + vdd_eth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_ETH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 16 0>; /* gpio line 48 */ + enable-active-high; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + debug0 { + label = "omap4:green:debug0"; + gpios = <&gpio2 29 0>; /* 61 */ + }; + + debug1 { + label = "omap4:green:debug1"; + gpios = <&gpio1 30 0>; /* 30 */ + }; + + debug2 { + label = "omap4:green:debug2"; + gpios = <&gpio1 7 0>; /* 7 */ + }; + + debug3 { + label = "omap4:green:debug3"; + gpios = <&gpio1 8 0>; /* 8 */ + }; + + debug4 { + label = "omap4:green:debug4"; + gpios = <&gpio2 18 0>; /* 50 */ + }; + + user1 { + label = "omap4:blue:user"; + gpios = <&gpio6 9 0>; /* 169 */ + }; + + user2 { + label = "omap4:red:user"; + gpios = <&gpio6 10 0>; /* 170 */ + }; + + user3 { + label = "omap4:green:user"; + gpios = <&gpio5 11 0>; /* 139 */ + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * Temperature Sensor + * http://www.ti.com/lit/ds/symlink/tmp105.pdf + */ + tmp105@48 { + compatible = "ti,tmp105"; + reg = <0x48>; + }; + + /* + * Ambient Light Sensor + * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf + */ + bh1780@29 { + compatible = "rohm,bh1780"; + reg = <0x29>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + /* + * 3-Axis Digital Compass + * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf + */ + hmc5843@1e { + compatible = "honeywell,hmc5843"; + reg = <0x1e>; + }; +}; + +&mcspi1 { + eth@0 { + compatible = "ks8851"; + spi-max-frequency = <24000000>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <2>; /* gpio line 34 */ + vdd-supply = <&vdd_eth>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + ti,bus-width = <8>; +}; + +&mmc2 { + vmmc-supply = <&vaux1>; + ti,bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + status = "disable"; +}; + +&mmc4 { + status = "disable"; +}; + +&mmc5 { + ti,bus-width = <4>; + ti,non-removable; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 3d35559e77bc..359c4979c8aa 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -104,6 +104,60 @@ <0x48240100 0x0100>; }; + gpio1: gpio@4a310000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@48055000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@48057000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@48059000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@4805b000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio5"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@4805d000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio6"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + uart1: serial@4806a000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart1"; @@ -155,5 +209,68 @@ #size-cells = <0>; ti,hwmods = "i2c4"; }; + + mcspi1: spi@48098000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; + }; + + mcspi2: spi@4809a000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; + ti,spi-num-cs = <2>; + }; + + mcspi3: spi@480b8000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; + ti,spi-num-cs = <2>; + }; + + mcspi4: spi@480ba000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; + ti,spi-num-cs = <1>; + }; + + mmc1: mmc@4809c000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + }; + + mmc3: mmc@480ad000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + }; + + mmc4: mmc@480d1000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc4"; + ti,needs-special-reset; + }; + + mmc5: mmc@480d5000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc5"; + ti,needs-special-reset; + }; }; }; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts new file mode 100644 index 000000000000..0167e86314c0 --- /dev/null +++ b/arch/arm/boot/dts/phy3250.dts @@ -0,0 +1,145 @@ +/* + * PHYTEC phyCORE-LPC3250 board + * + * Copyright 2012 Roland Stigge <stigge@antcom.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "lpc32xx.dtsi" + +/ { + model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250"; + compatible = "phytec,phy3250", "nxp,lpc3250"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0 0x4000000>; + }; + + ahb { + mac: ethernet@31060000 { + phy-mode = "rmii"; + use-iram; + }; + + /* Here, choose exactly one from: ohci, usbd */ + ohci@31020000 { + transceiver = <&isp1301>; + status = "okay"; + }; + +/* + usbd@31020000 { + transceiver = <&isp1301>; + status = "okay"; + }; +*/ + + clcd@31040000 { + status = "okay"; + }; + + /* 64MB Flash via SLC NAND controller */ + slc: flash@20020000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + mtd0@00000000 { + label = "phy3250-boot"; + reg = <0x00000000 0x00064000>; + read-only; + }; + + mtd1@00064000 { + label = "phy3250-uboot"; + reg = <0x00064000 0x00190000>; + read-only; + }; + + mtd2@001f4000 { + label = "phy3250-ubt-prms"; + reg = <0x001f4000 0x00010000>; + }; + + mtd3@00204000 { + label = "phy3250-kernel"; + reg = <0x00204000 0x00400000>; + }; + + mtd4@00604000 { + label = "phy3250-rootfs"; + reg = <0x00604000 0x039fc000>; + }; + }; + + apb { + i2c1: i2c@400A0000 { + clock-frequency = <100000>; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + uda1380: uda1380@18 { + compatible = "nxp,uda1380"; + reg = <0x18>; + power-gpio = <&gpio 0x59 0>; + reset-gpio = <&gpio 0x51 0>; + dac-clk = "wspll"; + }; + }; + + i2c2: i2c@400A8000 { + clock-frequency = <100000>; + }; + + i2cusb: i2c@31020300 { + clock-frequency = <100000>; + + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; + }; + + ssp0: ssp@20084000 { + eeprom: at25@0 { + compatible = "atmel,at25"; + }; + }; + }; + + fab { + tsc@40048000 { + status = "okay"; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpo_p3 1 1>; /* GPO_P3 1, GPIO 80, active low */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led1 { + gpios = <&gpo_p3 14 1>; /* GPO_P3 14, GPIO 93, active low */ + linux,default-trigger = "timer"; + default-state = "off"; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index d32d5128f225..31a718696080 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -18,13 +18,6 @@ i2c1 = &twsi2; }; - intc: intc-interrupt-controller@d4282000 { - compatible = "mrvl,mmp-intc", "mrvl,intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xd4282000 0x1000>; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -32,6 +25,23 @@ interrupt-parent = <&intc>; ranges; + axi@d4200000 { /* AXI */ + compatible = "mrvl,axi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4200000 0x00200000>; + ranges; + + intc: interrupt-controller@d4282000 { + compatible = "mrvl,mmp-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + mrvl,intc-nr-irqs = <64>; + }; + + }; + apb@d4000000 { /* APB */ compatible = "mrvl,apb-bus", "simple-bus"; #address-cells = <1>; @@ -39,40 +49,65 @@ reg = <0xd4000000 0x00200000>; ranges; + timer0: timer@d4014000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4014000 0x100>; + interrupts = <13>; + }; + uart1: uart@d4017000 { - compatible = "mrvl,mmp-uart", "mrvl,pxa-uart"; + compatible = "mrvl,mmp-uart"; reg = <0xd4017000 0x1000>; interrupts = <27>; status = "disabled"; }; uart2: uart@d4018000 { - compatible = "mrvl,mmp-uart", "mrvl,pxa-uart"; + compatible = "mrvl,mmp-uart"; reg = <0xd4018000 0x1000>; interrupts = <28>; status = "disabled"; }; uart3: uart@d4026000 { - compatible = "mrvl,mmp-uart", "mrvl,pxa-uart"; + compatible = "mrvl,mmp-uart"; reg = <0xd4026000 0x1000>; interrupts = <29>; status = "disabled"; }; - gpio: gpio@d4019000 { - compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio"; + gpio@d4019000 { + compatible = "mrvl,mmp-gpio"; + #address-cells = <1>; + #size-cells = <1>; reg = <0xd4019000 0x1000>; + gpio-controller; + #gpio-cells = <2>; interrupts = <49>; interrupt-names = "gpio_mux"; - gpio-controller; - #gpio-cells = <1>; interrupt-controller; #interrupt-cells = <1>; + ranges; + + gcb0: gpio@d4019000 { + reg = <0xd4019000 0x4>; + }; + + gcb1: gpio@d4019004 { + reg = <0xd4019004 0x4>; + }; + + gcb2: gpio@d4019008 { + reg = <0xd4019008 0x4>; + }; + + gcb3: gpio@d4019100 { + reg = <0xd4019100 0x4>; + }; }; twsi1: i2c@d4011000 { - compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; mrvl,i2c-fast-mode; @@ -80,7 +115,7 @@ }; twsi2: i2c@d4025000 { - compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + compatible = "mrvl,mmp-twsi"; reg = <0xd4025000 0x1000>; interrupts = <58>; status = "disabled"; diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts new file mode 100644 index 000000000000..e92be5a474e7 --- /dev/null +++ b/arch/arm/boot/dts/pxa910-dkb.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +/include/ "pxa910.dtsi" + +/ { + model = "Marvell PXA910 DKB Development Board"; + compatible = "mrvl,pxa910-dkb", "mrvl,pxa910"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; + }; + + memory { + reg = <0x00000000 0x10000000>; + }; + + soc { + apb@d4000000 { + uart1: uart@d4017000 { + status = "okay"; + }; + twsi1: i2c@d4011000 { + status = "okay"; + }; + rtc: rtc@d4010000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi new file mode 100644 index 000000000000..aebf32de73b4 --- /dev/null +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + i2c0 = &twsi1; + i2c1 = &twsi2; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + axi@d4200000 { /* AXI */ + compatible = "mrvl,axi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4200000 0x00200000>; + ranges; + + intc: interrupt-controller@d4282000 { + compatible = "mrvl,mmp-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + mrvl,intc-nr-irqs = <64>; + }; + + }; + + apb@d4000000 { /* APB */ + compatible = "mrvl,apb-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4000000 0x00200000>; + ranges; + + timer0: timer@d4014000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4014000 0x100>; + interrupts = <13>; + }; + + timer1: timer@d4016000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4016000 0x100>; + interrupts = <29>; + status = "disabled"; + }; + + uart1: uart@d4017000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4017000 0x1000>; + interrupts = <27>; + status = "disabled"; + }; + + uart2: uart@d4018000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4018000 0x1000>; + interrupts = <28>; + status = "disabled"; + }; + + uart3: uart@d4036000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4036000 0x1000>; + interrupts = <59>; + status = "disabled"; + }; + + gpio@d4019000 { + compatible = "mrvl,mmp-gpio"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4019000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <49>; + interrupt-names = "gpio_mux"; + interrupt-controller; + #interrupt-cells = <1>; + ranges; + + gcb0: gpio@d4019000 { + reg = <0xd4019000 0x4>; + }; + + gcb1: gpio@d4019004 { + reg = <0xd4019004 0x4>; + }; + + gcb2: gpio@d4019008 { + reg = <0xd4019008 0x4>; + }; + + gcb3: gpio@d4019100 { + reg = <0xd4019100 0x4>; + }; + }; + + twsi1: i2c@d4011000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4011000 0x1000>; + interrupts = <7>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi2: i2c@d4037000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4037000 0x1000>; + interrupts = <54>; + status = "disabled"; + }; + + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <5 6>; + interrupt-names = "rtc 1Hz", "rtc alarm"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi new file mode 100644 index 000000000000..677fc603f8b3 --- /dev/null +++ b/arch/arm/boot/dts/sh7372.dtsi @@ -0,0 +1,21 @@ +/* + * Device Tree Source for the sh7372 SoC + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,sh7372"; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 359c6d679156..d99dc04f0d91 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -30,35 +30,35 @@ wakeup = <1>; linux,code = <2>; label = "userpb"; - gpios = <&gpio1 0>; + gpios = <&gpio1 0 0>; }; button@2 { debounce_interval = <50>; wakeup = <1>; linux,code = <3>; - label = "userpb"; - gpios = <&gpio4 23>; + label = "extkb1"; + gpios = <&gpio4 23 0>; }; button@3 { debounce_interval = <50>; wakeup = <1>; linux,code = <4>; - label = "userpb"; - gpios = <&gpio4 23>; + label = "extkb2"; + gpios = <&gpio4 24 0>; }; button@4 { debounce_interval = <50>; wakeup = <1>; linux,code = <5>; - label = "userpb"; - gpios = <&gpio5 1>; + label = "extkb3"; + gpios = <&gpio5 1 0>; }; button@5 { debounce_interval = <50>; wakeup = <1>; linux,code = <6>; - label = "userpb"; - gpios = <&gpio5 2>; + label = "extkb4"; + gpios = <&gpio5 2 0>; }; }; @@ -73,17 +73,19 @@ soc-u9500 { external-bus@50000000 { - compatible = "simple-bus"; - reg = <0x50000000 0x10000000>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - ethernet@50000000 { - compatible = "smsc,9111"; - reg = <0x50000000 0x10000>; - interrupts = <12>; + status = "okay"; + + ethernet@0 { + compatible = "smsc,lan9115"; + reg = <0 0x10000>; + interrupts = <12 0x1>; interrupt-parent = <&gpio4>; + + reg-shift = <1>; + reg-io-width = <2>; + smsc,force-internal-phy; + smsc,irq-active-high; + smsc,irq-push-pull; }; }; diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts new file mode 100644 index 000000000000..6a79d69775b5 --- /dev/null +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -0,0 +1,183 @@ +/* + * DTS file for SPEAr300 Evaluation Baord + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear300.dtsi" + +/ { + model = "ST SPEAr300 Evaluation Board"; + compatible = "st,spear300-evb", "st,spear300"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + clcd@60000000 { + status = "okay"; + }; + + dma@fc400000 { + status = "okay"; + }; + + fsmc: flash@94000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + sdhci@70000000 { + int-gpio = <&gpio1 0 0>; + power-gpio = <&gpio1 2 1>; + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + gpio1: gpio@a9000000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + kbd@a0000000 { + linux,keymap = < 0x00000001 + 0x00010002 + 0x00020003 + 0x00030004 + 0x00040005 + 0x00050006 + 0x00060007 + 0x00070008 + 0x00080009 + 0x0100000a + 0x0101000c + 0x0102000d + 0x0103000e + 0x0104000f + 0x01050010 + 0x01060011 + 0x01070012 + 0x01080013 + 0x02000014 + 0x02010015 + 0x02020016 + 0x02030017 + 0x02040018 + 0x02050019 + 0x0206001a + 0x0207001b + 0x0208001c + 0x0300001d + 0x0301001e + 0x0302001f + 0x03030020 + 0x03040021 + 0x03050022 + 0x03060023 + 0x03070024 + 0x03080025 + 0x04000026 + 0x04010027 + 0x04020028 + 0x04030029 + 0x0404002a + 0x0405002b + 0x0406002c + 0x0407002d + 0x0408002e + 0x0500002f + 0x05010030 + 0x05020031 + 0x05030032 + 0x05040033 + 0x05050034 + 0x05060035 + 0x05070036 + 0x05080037 + 0x06000038 + 0x06010039 + 0x0602003a + 0x0603003b + 0x0604003c + 0x0605003d + 0x0606003e + 0x0607003f + 0x06080040 + 0x07000041 + 0x07010042 + 0x07020043 + 0x07030044 + 0x07040045 + 0x07050046 + 0x07060047 + 0x07070048 + 0x07080049 + 0x0800004a + 0x0801004b + 0x0802004c + 0x0803004d + 0x0804004e + 0x0805004f + 0x08060050 + 0x08070051 + 0x08080052 >; + autorepeat; + st,mode = <0>; + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi new file mode 100644 index 000000000000..f9fcbf4f477b --- /dev/null +++ b/arch/arm/boot/dts/spear300.dtsi @@ -0,0 +1,72 @@ +/* + * DTS file for SPEAr300 SoC + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x60000000 0x60000000 0x50000000 + 0xd0000000 0xd0000000 0x30000000>; + + clcd@60000000 { + compatible = "arm,clcd-pl110", "arm,primecell"; + reg = <0x60000000 0x1000>; + interrupts = <30>; + status = "disabled"; + }; + + fsmc: flash@94000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x94000000 0x1000 /* FSMC Register */ + 0x80000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + sdhci@70000000 { + compatible = "st,sdhci-spear"; + reg = <0x70000000 0x100>; + interrupts = <1>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xa0000000 0xa0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + gpio1: gpio@a9000000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xa9000000 0x1000>; + status = "disabled"; + }; + + kbd@a0000000 { + compatible = "st,spear300-kbd"; + reg = <0xa0000000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts new file mode 100644 index 000000000000..c86af33f700e --- /dev/null +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -0,0 +1,111 @@ +/* + * DTS file for SPEAr310 Evaluation Baord + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear310.dtsi" + +/ { + model = "ST SPEAr310 Evaluation Board"; + compatible = "st,spear310-evb", "st,spear310"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + dma@fc400000 { + status = "okay"; + }; + + fsmc: flash@44000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + clock-rate=<50000000>; + + flash@f8000000 { + label = "m25p64"; + reg = <0xf8000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + st,smi-fast-mode; + }; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + serial@b2000000 { + status = "okay"; + }; + + serial@b2080000 { + status = "okay"; + }; + + serial@b2100000 { + status = "okay"; + }; + + serial@b2180000 { + status = "okay"; + }; + + serial@b2200000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi new file mode 100644 index 000000000000..dc7fa14da846 --- /dev/null +++ b/arch/arm/boot/dts/spear310.dtsi @@ -0,0 +1,75 @@ +/* + * DTS file for SPEAr310 SoC + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x40000000 0x40000000 0x10000000 + 0xb0000000 0xb0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + fsmc: flash@44000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x44000000 0x1000 /* FSMC Register */ + 0x40000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x10000>; + st,cle-off = <0x20000>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xb0000000 0xb0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + serial@b2000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2000000 0x1000>; + status = "disabled"; + }; + + serial@b2080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2080000 0x1000>; + status = "disabled"; + }; + + serial@b2100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2100000 0x1000>; + status = "disabled"; + }; + + serial@b2180000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2180000 0x1000>; + status = "disabled"; + }; + + serial@b2200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2200000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts new file mode 100644 index 000000000000..d43de712e863 --- /dev/null +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -0,0 +1,112 @@ +/* + * DTS file for SPEAr320 Evaluation Baord + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear320.dtsi" + +/ { + model = "ST SPEAr300 Evaluation Board"; + compatible = "st,spear300-evb", "st,spear300"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + clcd@90000000 { + status = "okay"; + }; + + dma@fc400000 { + status = "okay"; + }; + + fsmc: flash@4c000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + sdhci@70000000 { + power-gpio = <&gpio0 2 1>; + power_always_enb; + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + spi1: spi@a5000000 { + status = "okay"; + }; + + spi2: spi@a6000000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + i2c1: i2c@a7000000 { + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + serial@a3000000 { + status = "okay"; + }; + + serial@a4000000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi new file mode 100644 index 000000000000..9a0267a5a0b7 --- /dev/null +++ b/arch/arm/boot/dts/spear320.dtsi @@ -0,0 +1,90 @@ +/* + * DTS file for SPEAr320 SoC + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x40000000 0x40000000 0x70000000 + 0xd0000000 0xd0000000 0x30000000>; + + clcd@90000000 { + compatible = "arm,clcd-pl110", "arm,primecell"; + reg = <0x90000000 0x1000>; + interrupts = <33>; + status = "disabled"; + }; + + fsmc: flash@4c000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x4c000000 0x1000 /* FSMC Register */ + 0x50000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + sdhci@70000000 { + compatible = "st,sdhci-spear"; + reg = <0x70000000 0x100>; + interrupts = <29>; + status = "disabled"; + }; + + spi1: spi@a5000000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xa5000000 0x1000>; + status = "disabled"; + }; + + spi2: spi@a6000000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xa6000000 0x1000>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xa0000000 0xa0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + i2c1: i2c@a7000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xa7000000 0x1000>; + status = "disabled"; + }; + + serial@a3000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xa3000000 0x1000>; + status = "disabled"; + }; + + serial@a4000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xa4000000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi new file mode 100644 index 000000000000..0ae7c8e86311 --- /dev/null +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -0,0 +1,144 @@ +/* + * DTS file for all SPEAr3xx SoCs + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&vic>; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x40000000>; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + vic: interrupt-controller@f1100000 { + compatible = "arm,pl190-vic"; + interrupt-controller; + reg = <0xf1100000 0x1000>; + #interrupt-cells = <1>; + }; + + dma@fc400000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0xfc400000 0x1000>; + interrupt-parent = <&vic>; + interrupts = <8>; + status = "disabled"; + }; + + gmac: eth@e0800000 { + compatible = "st,spear600-gmac"; + reg = <0xe0800000 0x8000>; + interrupts = <23 22>; + interrupt-names = "macirq", "eth_wake_irq"; + status = "disabled"; + }; + + smi: flash@fc000000 { + compatible = "st,spear600-smi"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xfc000000 0x1000>; + interrupts = <9>; + status = "disabled"; + }; + + spi0: spi@d0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xd0100000 0x1000>; + interrupts = <20>; + status = "disabled"; + }; + + ehci@e1800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe1800000 0x1000>; + interrupts = <26>; + status = "disabled"; + }; + + ohci@e1900000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe1900000 0x1000>; + interrupts = <25>; + status = "disabled"; + }; + + ohci@e2100000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe2100000 0x1000>; + interrupts = <27>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + gpio0: gpio@fc980000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc980000 0x1000>; + interrupts = <11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + i2c0: i2c@d0180000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xd0180000 0x1000>; + interrupts = <21>; + status = "disabled"; + }; + + rtc@fc900000 { + compatible = "st,spear-rtc"; + reg = <0xfc900000 0x1000>; + interrupts = <10>; + status = "disabled"; + }; + + serial@d0000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xd0000000 0x1000>; + interrupts = <19>; + status = "disabled"; + }; + + wdt@fc880000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0xfc880000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts index 636292e18c90..790a7a8a5ccd 100644 --- a/arch/arm/boot/dts/spear600-evb.dts +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -24,6 +24,10 @@ }; ahb { + dma@fc400000 { + status = "okay"; + }; + gmac: ethernet@e0800000 { phy-mode = "gmii"; status = "okay"; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index ebe0885a2b98..d777e3a6f178 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -45,6 +45,14 @@ #interrupt-cells = <1>; }; + dma@fc400000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0xfc400000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <10>; + status = "disabled"; + }; + gmac: ethernet@e0800000 { compatible = "st,spear600-gmac"; reg = <0xe0800000 0x8000>; diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts new file mode 100644 index 000000000000..367a16dcd5ef --- /dev/null +++ b/arch/arm/boot/dts/tny_a9260.dts @@ -0,0 +1,15 @@ +/* + * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9260.dtsi" +/include/ "tny_a9260_common.dtsi" + +/ { + model = "Calao TNY A9260"; + compatible = "calao,tny-a9260", "atmel,at91sam9260", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi new file mode 100644 index 000000000000..0e6d3de2e09e --- /dev/null +++ b/arch/arm/boot/dts/tny_a9260_common.dtsi @@ -0,0 +1,83 @@ +/* + * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/ { + chosen { + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts new file mode 100644 index 000000000000..dee9c571306b --- /dev/null +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -0,0 +1,97 @@ +/* + * usb_a9263.dts - Device Tree file for Caloa USB A9293 board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +/include/ "at91sam9263.dtsi" + +/ { + model = "Calao TNY A9263"; + compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + dbgu: serial@ffffee00 { + status = "okay"; + }; + + usb1: gadget@fff78000 { + atmel,vbus-gpio = <&pioB 11 0>; + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; + + i2c@0 { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts new file mode 100644 index 000000000000..e1ab64c72dba --- /dev/null +++ b/arch/arm/boot/dts/tny_a9g20.dts @@ -0,0 +1,15 @@ +/* + * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9g20.dtsi" +/include/ "tny_a9260_common.dtsi" + +/ { + model = "Calao TNY A9G20"; + compatible = "calao,tny-a9g20", "atmel,at91sam9g20", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi new file mode 100644 index 000000000000..22f4d1394ed3 --- /dev/null +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + */ +&twl { + compatible = "ti,twl4030"; + interrupt-controller; + #interrupt-cells = <1>; + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; + + vdac: regulator@0 { + compatible = "ti,twl4030-vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vpll2: regulator@1 { + compatible = "ti,twl4030-vpll2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vmmc1: regulator@2 { + compatible = "ti,twl4030-vmmc1"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <3150000>; + }; + + twl_gpio: gpio { + compatible = "ti,twl4030-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi new file mode 100644 index 000000000000..3b2f3510d7eb --- /dev/null +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/twl6030.pdf + */ +&twl { + compatible = "ti,twl6030"; + interrupt-controller; + #interrupt-cells = <1>; + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; + + vaux1: regulator@0 { + compatible = "ti,twl6030-vaux1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; + + vaux2: regulator@1 { + compatible = "ti,twl6030-vaux2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + }; + + vaux3: regulator@2 { + compatible = "ti,twl6030-vaux3"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; + + vmmc: regulator@3 { + compatible = "ti,twl6030-vmmc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + }; + + vpp: regulator@4 { + compatible = "ti,twl6030-vpp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2500000>; + }; + + vusim: regulator@5 { + compatible = "ti,twl6030-vusim"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2900000>; + }; + + vdac: regulator@6 { + compatible = "ti,twl6030-vdac"; + }; + + vana: regulator@7 { + compatible = "ti,twl6030-vana"; + }; + + vcxio: regulator@8 { + compatible = "ti,twl6030-vcxio"; + }; + + vusb: regulator@9 { + compatible = "ti,twl6030-vusb"; + }; + + v1v8: regulator@10 { + compatible = "ti,twl6030-v1v8"; + }; + + v2v1: regulator@11 { + compatible = "ti,twl6030-v2v1"; + }; + + clk32kg: regulator@12 { + compatible = "ti,twl6030-clk32kg"; + }; +}; diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts new file mode 100644 index 000000000000..296216058c11 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9260.dts @@ -0,0 +1,23 @@ +/* + * usb_a9260.dts - Device Tree file for Caloa USB A9260 board + * + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9260.dtsi" +/include/ "usb_a9260_common.dtsi" + +/ { + model = "Calao USB A9260"; + compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; +}; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi new file mode 100644 index 000000000000..e70d229baef5 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -0,0 +1,117 @@ +/* + * usb_a926x.dts - Device Tree file for Caloa USB A926x board + * + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ + +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 0>; + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led { + label = "user_led"; + gpios = <&pioB 21 1>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&pioB 10 1>; + linux,code = <28>; + gpio-key,wakeup; + }; + }; + + i2c@0 { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts new file mode 100644 index 000000000000..6fe05ccb6203 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -0,0 +1,131 @@ +/* + * usb_a9263.dts - Device Tree file for Caloa USB A9293 board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +/include/ "at91sam9263.dtsi" + +/ { + model = "Calao USB A9263"; + compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + dbgu: serial@ffffee00 { + status = "okay"; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fff78000 { + atmel,vbus-gpio = <&pioB 11 0>; + status = "okay"; + }; + + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + + usb0: ohci@00a00000 { + num-ports = <2>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led { + label = "user_led"; + gpios = <&pioB 21 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&pioB 10 1>; + linux,code = <28>; + gpio-key,wakeup; + }; + }; + + i2c@0 { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index 7c2399c532e5..2dacb16ce4ae 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -7,6 +7,7 @@ */ /dts-v1/; /include/ "at91sam9g20.dtsi" +/include/ "usb_a9260_common.dtsi" / { model = "Calao USB A9G20"; @@ -20,108 +21,7 @@ reg = <0x20000000 0x4000000>; }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - dbgu: serial@fffff200 { - status = "okay"; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "rmii"; - status = "okay"; - }; - - usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; - status = "okay"; - }; - }; - - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - status = "okay"; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xa0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4a0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7ca0000 0x8360000>; - }; - }; - - usb0: ohci@00500000 { - num-ports = <2>; - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - user_led { - label = "user_led"; - gpios = <&pioB 21 1>; - linux,default-trigger = "heartbeat"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - user_pb { - label = "user_pb"; - gpios = <&pioB 10 1>; - linux,code = <28>; - gpio-key,wakeup; - }; - }; - i2c@0 { - status = "okay"; - rv3029c2@56 { compatible = "rv3029c2"; reg = <0x56>; diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index fb2088171ca9..4fa60547494a 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LOG_BUF_SHIFT=16 CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y @@ -10,6 +10,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y +CONFIG_JUMP_LABEL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set @@ -21,6 +22,8 @@ CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0" CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y @@ -40,7 +43,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set @@ -55,13 +59,24 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_MII=y -CONFIG_PHYLIB=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_LPC_ENET=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set @@ -97,16 +112,22 @@ CONFIG_SND_SEQUENCER=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set +CONFIG_SND_DEBUG=y +CONFIG_SND_DEBUG_VERBOSE=y # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set CONFIG_SND_SOC=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y +CONFIG_USB_GADGET=y +CONFIG_USB_LPC32XX=y +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y @@ -114,10 +135,21 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_DS1374=y +CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_LPC32XX=y +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y +CONFIG_STAGING=y +CONFIG_IIO=y +CONFIG_LPC32XX_ADC=y CONFIG_EXT2_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index fea7e1f026a3..7ed42912d69a 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -2,33 +2,67 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_PLAT_SPEAR=y -CONFIG_BOARD_SPEAR300_EVB=y -CONFIG_BOARD_SPEAR310_EVB=y -CONFIG_BOARD_SPEAR320_EVB=y +CONFIG_MACH_SPEAR300=y +CONFIG_MACH_SPEAR310=y +CONFIG_MACH_SPEAR320=y CONFIG_BINFMT_MISC=y +CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +CONFIG_STMMAC_ETH=y +# CONFIG_WLAN is not set CONFIG_INPUT_FF_MEMLESS=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_SPEAR=y # CONFIG_INPUT_MOUSE is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 +CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y +CONFIG_DMATEST=m CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_SECURITY=y @@ -39,8 +73,6 @@ CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_TMPFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m @@ -48,6 +80,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_INFO=y -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index cef2e836afd2..cf94bc73a0e0 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -2,29 +2,58 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR6XX=y -CONFIG_BOARD_SPEAR600_EVB=y +CONFIG_BOARD_SPEAR600_DT=y CONFIG_BINFMT_MISC=y +CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +CONFIG_STMMAC_ETH=y +# CONFIG_WLAN is not set CONFIG_INPUT_FF_MEMLESS=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 +CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y +CONFIG_DMATEST=m CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_SECURITY=y @@ -35,8 +64,6 @@ CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_TMPFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m @@ -44,6 +71,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_INFO=y -# CONFIG_CRC32 is not set diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 0da66ca4a4f8..c03417ddbf0c 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -14,7 +14,19 @@ initrd_phys-y := 0x20410000 endif # Keep dtb files sorted alphabetically for each SoC +# sam9260 +dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb +dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb +dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb +# sam9263 +dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb +dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb +dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb # sam9g20 +dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb +dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb +dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb +dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb # sam9g45 dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index ad00fe91d37d..d556de141114 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -702,25 +702,8 @@ static struct platform_device at91sam9260_tcb1_device = { .num_resources = ARRAY_SIZE(tcb1_resources), }; -#if defined(CONFIG_OF) -static struct of_device_id tcb_ids[] = { - { .compatible = "atmel,at91rm9200-tcb" }, - { /*sentinel*/ } -}; -#endif - static void __init at91_add_device_tc(void) { -#if defined(CONFIG_OF) - struct device_node *np; - - np = of_find_matching_node(NULL, tcb_ids); - if (np) { - of_node_put(np); - return; - } -#endif - platform_device_register(&at91sam9260_tcb0_device); platform_device_register(&at91sam9260_tcb1_device); } @@ -1364,6 +1347,9 @@ void __init at91_add_device_cf(struct at91_cf_data * data) {} */ static int __init at91_add_standard_devices(void) { + if (of_have_populated_dt()) + return 0; + at91_add_device_rtt(); at91_add_device_watchdog(); at91_add_device_tc(); diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 7fae36502fbb..ed91c7e9f7c2 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -199,6 +199,16 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("pioC", &pioCDE_clk), CLKDEV_CON_ID("pioD", &pioCDE_clk), CLKDEV_CON_ID("pioE", &pioCDE_clk), + /* more usart lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk), + /* more tc lookup table for DT entries */ + CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb_clk), + CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index dfe5bc006d5e..175e0009eaa9 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -953,8 +953,25 @@ static struct platform_device at91sam9263_tcb_device = { .num_resources = ARRAY_SIZE(tcb_resources), }; +#if defined(CONFIG_OF) +static struct of_device_id tcb_ids[] = { + { .compatible = "atmel,at91rm9200-tcb" }, + { /*sentinel*/ } +}; +#endif + static void __init at91_add_device_tc(void) { +#if defined(CONFIG_OF) + struct device_node *np; + + np = of_find_matching_node(NULL, tcb_ids); + if (np) { + of_node_put(np); + return; + } +#endif + platform_device_register(&at91sam9263_tcb_device); } #else @@ -1483,6 +1500,9 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + if (of_have_populated_dt()) + return 0; + at91_add_device_rtt(); at91_add_device_watchdog(); at91_add_device_tc(); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index db2f88c246ff..35bd42d02195 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -69,15 +69,7 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { -#if defined(CONFIG_OF) - struct device_node *of_node = - of_find_node_by_name(NULL, "dma-controller"); - - if (of_node) - of_node_put(of_node); - else -#endif - platform_device_register(&at_hdmac_device); + platform_device_register(&at_hdmac_device); } #else void __init at91_add_device_hdmac(void) {} @@ -1094,25 +1086,8 @@ static struct platform_device at91sam9g45_tcb1_device = { .num_resources = ARRAY_SIZE(tcb1_resources), }; -#if defined(CONFIG_OF) -static struct of_device_id tcb_ids[] = { - { .compatible = "atmel,at91rm9200-tcb" }, - { /*sentinel*/ } -}; -#endif - static void __init at91_add_device_tc(void) { -#if defined(CONFIG_OF) - struct device_node *np; - - np = of_find_matching_node(NULL, tcb_ids); - if (np) { - of_node_put(np); - return; - } -#endif - platform_device_register(&at91sam9g45_tcb0_device); platform_device_register(&at91sam9g45_tcb1_device); } @@ -1763,6 +1738,9 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + if (of_have_populated_dt()) + return 0; + at91_add_device_hdmac(); at91_add_device_rtc(); at91_add_device_rtt(); diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 332ecd40bd02..95393fcaf199 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -172,6 +172,10 @@ static struct mtd_partition __initdata ek_nand_partition[] = { .offset = MTDPART_OFS_NXTBLK, .size = SZ_128K, }, { + .name = "oftree", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_128K, + }, { .name = "kernel", .offset = MTDPART_OFS_NXTBLK, .size = 4 * SZ_1M, diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig index 75946ac89ee9..e0b3eee83834 100644 --- a/arch/arm/mach-lpc32xx/Kconfig +++ b/arch/arm/mach-lpc32xx/Kconfig @@ -29,30 +29,4 @@ config ARCH_LPC32XX_UART6_SELECT endmenu -menu "LPC32XX chip components" - -config ARCH_LPC32XX_IRAM_FOR_NET - bool "Use IRAM for network buffers" - default y - help - Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as - network buffer. If the total combined required buffer sizes is - larger than the size of IRAM, then SDRAM will be used instead. - - This can be enabled safely if the IRAM is not intended for other - uses. - -config ARCH_LPC32XX_MII_SUPPORT - bool "Check to enable MII support or leave disabled for RMII support" - help - Say Y here to enable MII support, or N for RMII support. Regardless of - which support is selected, the ethernet interface driver needs to be - selected in the device driver networking section. - - The PHY3250 reference board uses RMII, so users of this board should - say N. - -endmenu - endif - diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index 2fc24ca12054..f6a3ffec1f4b 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -1095,49 +1095,42 @@ struct clk *clk_get_parent(struct clk *clk) } EXPORT_SYMBOL(clk_get_parent); -#define _REGISTER_CLOCK(d, n, c) \ - { \ - .dev_id = (d), \ - .con_id = (n), \ - .clk = &(c), \ - }, - static struct clk_lookup lookups[] = { - _REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz) - _REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397) - _REGISTER_CLOCK(NULL, "osc_main", osc_main) - _REGISTER_CLOCK(NULL, "sys_ck", clk_sys) - _REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll) - _REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll) - _REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk) - _REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk) - _REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0) - _REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1) - _REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2) - _REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3) - _REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9) - _REGISTER_CLOCK(NULL, "clk_dmac", clk_dma) - _REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt) - _REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3) - _REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4) - _REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5) - _REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6) - _REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0) - _REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1) - _REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2) - _REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0) - _REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1) - _REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan) - _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand) - _REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc) - _REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0) - _REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1) - _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc) - _REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc) - _REGISTER_CLOCK("lpc-eth.0", NULL, clk_net) - _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd) - _REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd) - _REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc) + CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz), + CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397), + CLKDEV_INIT(NULL, "osc_main", &osc_main), + CLKDEV_INIT(NULL, "sys_ck", &clk_sys), + CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll), + CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll), + CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk), + CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk), + CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0), + CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1), + CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2), + CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3), + CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9), + CLKDEV_INIT("pl08xdmac", NULL, &clk_dma), + CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt), + CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3), + CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4), + CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5), + CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6), + CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0), + CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1), + CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2), + CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0), + CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1), + CLKDEV_INIT("lpc32xx_keys.0", NULL, &clk_kscan), + CLKDEV_INIT("lpc32xx-nand.0", "nand_ck", &clk_nand), + CLKDEV_INIT("40048000.adc", NULL, &clk_adc), + CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0), + CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1), + CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc), + CLKDEV_INIT("20098000.sd", NULL, &clk_mmc), + CLKDEV_INIT("31060000.ethernet", NULL, &clk_net), + CLKDEV_INIT("dev:clcd", NULL, &clk_lcd), + CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd), + CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc), }; static int __init clk_init(void) diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index bbbf063a74c2..5c96057b6d78 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -27,186 +27,11 @@ #include <asm/mach/map.h> -#include <mach/i2c.h> #include <mach/hardware.h> #include <mach/platform.h> #include "common.h" /* - * Watchdog timer - */ -static struct resource watchdog_resources[] = { - [0] = { - .start = LPC32XX_WDTIM_BASE, - .end = LPC32XX_WDTIM_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device lpc32xx_watchdog_device = { - .name = "pnx4008-watchdog", - .id = -1, - .num_resources = ARRAY_SIZE(watchdog_resources), - .resource = watchdog_resources, -}; - -/* - * I2C busses - */ -static struct i2c_pnx_data i2c0_data = { - .name = I2C_CHIP_NAME "1", - .base = LPC32XX_I2C1_BASE, - .irq = IRQ_LPC32XX_I2C_1, -}; - -static struct i2c_pnx_data i2c1_data = { - .name = I2C_CHIP_NAME "2", - .base = LPC32XX_I2C2_BASE, - .irq = IRQ_LPC32XX_I2C_2, -}; - -static struct i2c_pnx_data i2c2_data = { - .name = "USB-I2C", - .base = LPC32XX_OTG_I2C_BASE, - .irq = IRQ_LPC32XX_USB_I2C, -}; - -struct platform_device lpc32xx_i2c0_device = { - .name = "pnx-i2c", - .id = 0, - .dev = { - .platform_data = &i2c0_data, - }, -}; - -struct platform_device lpc32xx_i2c1_device = { - .name = "pnx-i2c", - .id = 1, - .dev = { - .platform_data = &i2c1_data, - }, -}; - -struct platform_device lpc32xx_i2c2_device = { - .name = "pnx-i2c", - .id = 2, - .dev = { - .platform_data = &i2c2_data, - }, -}; - -/* TSC (Touch Screen Controller) */ - -static struct resource lpc32xx_tsc_resources[] = { - { - .start = LPC32XX_ADC_BASE, - .end = LPC32XX_ADC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_LPC32XX_TS_IRQ, - .end = IRQ_LPC32XX_TS_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device lpc32xx_tsc_device = { - .name = "ts-lpc32xx", - .id = -1, - .num_resources = ARRAY_SIZE(lpc32xx_tsc_resources), - .resource = lpc32xx_tsc_resources, -}; - -/* RTC */ - -static struct resource lpc32xx_rtc_resources[] = { - { - .start = LPC32XX_RTC_BASE, - .end = LPC32XX_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - },{ - .start = IRQ_LPC32XX_RTC, - .end = IRQ_LPC32XX_RTC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device lpc32xx_rtc_device = { - .name = "rtc-lpc32xx", - .id = -1, - .num_resources = ARRAY_SIZE(lpc32xx_rtc_resources), - .resource = lpc32xx_rtc_resources, -}; - -/* - * ADC support - */ -static struct resource adc_resources[] = { - { - .start = LPC32XX_ADC_BASE, - .end = LPC32XX_ADC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_LPC32XX_TS_IRQ, - .end = IRQ_LPC32XX_TS_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device lpc32xx_adc_device = { - .name = "lpc32xx-adc", - .id = -1, - .num_resources = ARRAY_SIZE(adc_resources), - .resource = adc_resources, -}; - -/* - * USB support - */ -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32) 0; -static struct resource ohci_resources[] = { - { - .start = IO_ADDRESS(LPC32XX_USB_BASE), - .end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1), - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_LPC32XX_USB_HOST, - .flags = IORESOURCE_IRQ, - }, -}; -struct platform_device lpc32xx_ohci_device = { - .name = "usb-ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xFFFFFFFF, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -/* - * Network Support - */ -static struct resource net_resources[] = { - [0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K), - [1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K), - [2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET), -}; - -static u64 lpc32xx_mac_dma_mask = 0xffffffffUL; -struct platform_device lpc32xx_net_device = { - .name = "lpc-eth", - .id = 0, - .dev = { - .dma_mask = &lpc32xx_mac_dma_mask, - .coherent_dma_mask = 0xffffffffUL, - }, - .num_resources = ARRAY_SIZE(net_resources), - .resource = net_resources, -}; - -/* * Returns the unique ID for the device */ void lpc32xx_get_uid(u32 devid[4]) @@ -398,3 +223,16 @@ void lpc23xx_restart(char mode, const char *cmd) while (1) ; } + +static int __init lpc32xx_display_uid(void) +{ + u32 uid[4]; + + lpc32xx_get_uid(uid); + + printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n", + uid[3], uid[2], uid[1], uid[0]); + + return 1; +} +arch_initcall(lpc32xx_display_uid); diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 68e45e8c9486..afeac3b1fae6 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -23,26 +23,12 @@ #include <linux/platform_device.h> /* - * Arch specific platform device structures - */ -extern struct platform_device lpc32xx_watchdog_device; -extern struct platform_device lpc32xx_i2c0_device; -extern struct platform_device lpc32xx_i2c1_device; -extern struct platform_device lpc32xx_i2c2_device; -extern struct platform_device lpc32xx_tsc_device; -extern struct platform_device lpc32xx_adc_device; -extern struct platform_device lpc32xx_rtc_device; -extern struct platform_device lpc32xx_ohci_device; -extern struct platform_device lpc32xx_net_device; - -/* * Other arch specific structures and functions */ extern struct sys_timer lpc32xx_timer; extern void __init lpc32xx_init_irq(void); extern void __init lpc32xx_map_io(void); extern void __init lpc32xx_serial_init(void); -extern void __init lpc32xx_gpio_init(void); extern void lpc23xx_restart(char, const char *); diff --git a/arch/arm/mach-lpc32xx/include/mach/i2c.h b/arch/arm/mach-lpc32xx/include/mach/i2c.h deleted file mode 100644 index 034dc9286bcc..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/i2c.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * PNX4008-specific tweaks for I2C IP3204 block - * - * Author: Vitaly Wool <vwool@ru.mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARCH_I2C_H -#define __ASM_ARCH_I2C_H - -enum { - mstatus_tdi = 0x00000001, - mstatus_afi = 0x00000002, - mstatus_nai = 0x00000004, - mstatus_drmi = 0x00000008, - mstatus_active = 0x00000020, - mstatus_scl = 0x00000040, - mstatus_sda = 0x00000080, - mstatus_rff = 0x00000100, - mstatus_rfe = 0x00000200, - mstatus_tff = 0x00000400, - mstatus_tfe = 0x00000800, -}; - -enum { - mcntrl_tdie = 0x00000001, - mcntrl_afie = 0x00000002, - mcntrl_naie = 0x00000004, - mcntrl_drmie = 0x00000008, - mcntrl_daie = 0x00000020, - mcntrl_rffie = 0x00000040, - mcntrl_tffie = 0x00000080, - mcntrl_reset = 0x00000100, - mcntrl_cdbmode = 0x00000400, -}; - -enum { - rw_bit = 1 << 0, - start_bit = 1 << 8, - stop_bit = 1 << 9, -}; - -#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */ -#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */ -#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */ -#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */ -#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */ -#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */ -#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */ -#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */ -#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */ -#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */ -#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */ -#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */ -#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */ - -#define I2C_CHIP_NAME "PNX4008-I2C" - -#endif /* __ASM_ARCH_I2C_H */ diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index d080cb1123dd..5b1cc35e6fba 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -22,6 +22,11 @@ #include <linux/irq.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/irqdomain.h> +#include <linux/module.h> #include <mach/irqs.h> #include <mach/hardware.h> @@ -44,6 +49,9 @@ #define SIC1_ATR_DEFAULT 0x00026000 #define SIC2_ATR_DEFAULT 0x00000000 +static struct irq_domain *lpc32xx_mic_domain; +static struct device_node *lpc32xx_mic_np; + struct lpc32xx_event_group_regs { void __iomem *enab_reg; void __iomem *edge_reg; @@ -203,7 +211,7 @@ static void lpc32xx_mask_irq(struct irq_data *d) { unsigned int reg, ctrl, mask; - get_controller(d->irq, &ctrl, &mask); + get_controller(d->hwirq, &ctrl, &mask); reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask; __raw_writel(reg, LPC32XX_INTC_MASK(ctrl)); @@ -213,7 +221,7 @@ static void lpc32xx_unmask_irq(struct irq_data *d) { unsigned int reg, ctrl, mask; - get_controller(d->irq, &ctrl, &mask); + get_controller(d->hwirq, &ctrl, &mask); reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask; __raw_writel(reg, LPC32XX_INTC_MASK(ctrl)); @@ -223,14 +231,14 @@ static void lpc32xx_ack_irq(struct irq_data *d) { unsigned int ctrl, mask; - get_controller(d->irq, &ctrl, &mask); + get_controller(d->hwirq, &ctrl, &mask); __raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl)); /* Also need to clear pending wake event */ - if (lpc32xx_events[d->irq].mask != 0) - __raw_writel(lpc32xx_events[d->irq].mask, - lpc32xx_events[d->irq].event_group->rawstat_reg); + if (lpc32xx_events[d->hwirq].mask != 0) + __raw_writel(lpc32xx_events[d->hwirq].mask, + lpc32xx_events[d->hwirq].event_group->rawstat_reg); } static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level, @@ -274,22 +282,22 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type) switch (type) { case IRQ_TYPE_EDGE_RISING: /* Rising edge sensitive */ - __lpc32xx_set_irq_type(d->irq, 1, 1); + __lpc32xx_set_irq_type(d->hwirq, 1, 1); break; case IRQ_TYPE_EDGE_FALLING: /* Falling edge sensitive */ - __lpc32xx_set_irq_type(d->irq, 0, 1); + __lpc32xx_set_irq_type(d->hwirq, 0, 1); break; case IRQ_TYPE_LEVEL_LOW: /* Low level sensitive */ - __lpc32xx_set_irq_type(d->irq, 0, 0); + __lpc32xx_set_irq_type(d->hwirq, 0, 0); break; case IRQ_TYPE_LEVEL_HIGH: /* High level sensitive */ - __lpc32xx_set_irq_type(d->irq, 1, 0); + __lpc32xx_set_irq_type(d->hwirq, 1, 0); break; /* Other modes are not supported */ @@ -298,7 +306,7 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type) } /* Ok to use the level handler for all types */ - irq_set_handler(d->irq, handle_level_irq); + irq_set_handler(d->hwirq, handle_level_irq); return 0; } @@ -307,33 +315,33 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state) { unsigned long eventreg; - if (lpc32xx_events[d->irq].mask != 0) { - eventreg = __raw_readl(lpc32xx_events[d->irq]. + if (lpc32xx_events[d->hwirq].mask != 0) { + eventreg = __raw_readl(lpc32xx_events[d->hwirq]. event_group->enab_reg); if (state) - eventreg |= lpc32xx_events[d->irq].mask; + eventreg |= lpc32xx_events[d->hwirq].mask; else { - eventreg &= ~lpc32xx_events[d->irq].mask; + eventreg &= ~lpc32xx_events[d->hwirq].mask; /* * When disabling the wakeup, clear the latched * event */ - __raw_writel(lpc32xx_events[d->irq].mask, - lpc32xx_events[d->irq]. + __raw_writel(lpc32xx_events[d->hwirq].mask, + lpc32xx_events[d->hwirq]. event_group->rawstat_reg); } __raw_writel(eventreg, - lpc32xx_events[d->irq].event_group->enab_reg); + lpc32xx_events[d->hwirq].event_group->enab_reg); return 0; } /* Clear event */ - __raw_writel(lpc32xx_events[d->irq].mask, - lpc32xx_events[d->irq].event_group->rawstat_reg); + __raw_writel(lpc32xx_events[d->hwirq].mask, + lpc32xx_events[d->hwirq].event_group->rawstat_reg); return -ENODEV; } @@ -353,6 +361,7 @@ static void __init lpc32xx_set_default_mappings(unsigned int apr, } static struct irq_chip lpc32xx_irq_chip = { + .name = "MIC", .irq_ack = lpc32xx_ack_irq, .irq_mask = lpc32xx_mask_irq, .irq_unmask = lpc32xx_unmask_irq, @@ -386,9 +395,23 @@ static void lpc32xx_sic2_handler(unsigned int irq, struct irq_desc *desc) } } +static int __init __lpc32xx_mic_of_init(struct device_node *node, + struct device_node *parent) +{ + lpc32xx_mic_np = node; + + return 0; +} + +static const struct of_device_id mic_of_match[] __initconst = { + { .compatible = "nxp,lpc3220-mic", .data = __lpc32xx_mic_of_init }, + { } +}; + void __init lpc32xx_init_irq(void) { unsigned int i; + int irq_base; /* Setup MIC */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE)); @@ -448,4 +471,19 @@ void __init lpc32xx_init_irq(void) LPC32XX_CLKPWR_PIN_RS); __raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS), LPC32XX_CLKPWR_INT_RS); + + of_irq_init(mic_of_match); + + irq_base = irq_alloc_descs(-1, 0, NR_IRQS, 0); + if (irq_base < 0) { + pr_warn("Cannot allocate irq_descs, assuming pre-allocated\n"); + irq_base = 0; + } + + lpc32xx_mic_domain = irq_domain_add_legacy(lpc32xx_mic_np, NR_IRQS, + irq_base, 0, + &irq_domain_simple_ops, + NULL); + if (!lpc32xx_mic_domain) + panic("Unable to add MIC irq domain\n"); } diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 7f7401ec7487..540106cdb9ec 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -1,8 +1,9 @@ /* - * arch/arm/mach-lpc32xx/phy3250.c + * Platform support for LPC32xx SoC * * Author: Kevin Wells <kevin.wells@nxp.com> * + * Copyright (C) 2012 Roland Stigge <stigge@antcom.de> * Copyright (C) 2010 NXP Semiconductors * * This program is free software; you can redistribute it and/or modify @@ -25,11 +26,16 @@ #include <linux/device.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> -#include <linux/leds.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/amba/pl022.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/clk.h> +#include <linux/amba/pl08x.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -47,7 +53,6 @@ #define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) #define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) #define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) -#define LED_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1) /* * AMBA LCD controller @@ -150,9 +155,6 @@ static struct clcd_board lpc32xx_clcd_data = { .remove = lpc32xx_clcd_remove, }; -static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0, - LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data); - /* * AMBA SSP (SPI) */ @@ -180,8 +182,11 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = { .enable_dma = 0, }; -static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0, - LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data); +static struct pl022_ssp_controller lpc32xx_ssp1_data = { + .bus_id = 1, + .num_chipselect = 1, + .enable_dma = 0, +}; /* AT25 driver registration */ static int __init phy3250_spi_board_register(void) @@ -221,73 +226,20 @@ static int __init phy3250_spi_board_register(void) } arch_initcall(phy3250_spi_board_register); -static struct i2c_board_info __initdata phy3250_i2c_board_info[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -static struct gpio_led phy_leds[] = { - { - .name = "led0", - .gpio = LED_GPIO, - .active_low = 1, - .default_trigger = "heartbeat", - }, -}; - -static struct gpio_led_platform_data led_data = { - .leds = phy_leds, - .num_leds = ARRAY_SIZE(phy_leds), -}; - -static struct platform_device lpc32xx_gpio_led_device = { - .name = "leds-gpio", - .id = -1, - .dev.platform_data = &led_data, +static struct pl08x_platform_data pl08x_pd = { }; -static struct platform_device *phy3250_devs[] __initdata = { - &lpc32xx_rtc_device, - &lpc32xx_tsc_device, - &lpc32xx_i2c0_device, - &lpc32xx_i2c1_device, - &lpc32xx_i2c2_device, - &lpc32xx_watchdog_device, - &lpc32xx_gpio_led_device, - &lpc32xx_adc_device, - &lpc32xx_ohci_device, - &lpc32xx_net_device, +static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data), + OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data), + OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data), + OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd), + { } }; -static struct amba_device *amba_devs[] __initdata = { - &lpc32xx_clcd_device, - &lpc32xx_ssp0_device, -}; - -/* - * Board specific functions - */ -static void __init phy3250_board_init(void) +static void __init lpc3250_machine_init(void) { u32 tmp; - int i; - - lpc32xx_gpio_init(); - - /* Register GPIOs used on this board */ - if (gpio_request(SPI0_CS_GPIO, "spi0 cs")) - printk(KERN_ERR "Error requesting gpio %u", - SPI0_CS_GPIO); - else if (gpio_direction_output(SPI0_CS_GPIO, 1)) - printk(KERN_ERR "Error setting gpio %u to output", - SPI0_CS_GPIO); - - /* Setup network interface for RMII mode */ - tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL); - tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK; - tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS; - __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL); /* Setup SLC NAND controller muxing */ __raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC, @@ -300,6 +252,12 @@ static void __init phy3250_board_init(void) tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16; __raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL); + /* Set up USB power */ + tmp = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); + tmp |= LPC32XX_CLKPWR_USBCTRL_HCLK_EN | + LPC32XX_CLKPWR_USBCTRL_USBI2C_EN; + __raw_writel(tmp, LPC32XX_CLKPWR_USB_CTRL); + /* Set up I2C pull levels */ tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL); tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE | @@ -321,54 +279,51 @@ static void __init phy3250_board_init(void) /* * AMBA peripheral clocks need to be enabled prior to AMBA device * detection or a data fault will occur, so enable the clocks - * here. However, we don't want to enable them if the peripheral - * isn't included in the image + * here. */ -#ifdef CONFIG_FB_ARMCLCD tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); __raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN), LPC32XX_CLKPWR_LCDCLK_CTRL); -#endif -#ifdef CONFIG_SPI_PL022 + tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL); __raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN), LPC32XX_CLKPWR_SSP_CLK_CTRL); -#endif - platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs)); - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } + tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL); + __raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN), + LPC32XX_CLKPWR_DMA_CLK_CTRL); /* Test clock needed for UDA1380 initial init */ __raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC | LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN, LPC32XX_CLKPWR_TEST_CLK_SEL); - i2c_register_board_info(0, phy3250_i2c_board_info, - ARRAY_SIZE(phy3250_i2c_board_info)); -} - -static int __init lpc32xx_display_uid(void) -{ - u32 uid[4]; - - lpc32xx_get_uid(uid); - - printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n", - uid[3], uid[2], uid[1], uid[0]); + of_platform_populate(NULL, of_default_bus_match_table, + lpc32xx_auxdata_lookup, NULL); - return 1; + /* Register GPIOs used on this board */ + if (gpio_request(SPI0_CS_GPIO, "spi0 cs")) + printk(KERN_ERR "Error requesting gpio %u", + SPI0_CS_GPIO); + else if (gpio_direction_output(SPI0_CS_GPIO, 1)) + printk(KERN_ERR "Error setting gpio %u to output", + SPI0_CS_GPIO); } -arch_initcall(lpc32xx_display_uid); -MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller") - /* Maintainer: Kevin Wells, NXP Semiconductors */ +static char const *lpc32xx_dt_compat[] __initdata = { + "nxp,lpc3220", + "nxp,lpc3230", + "nxp,lpc3240", + "nxp,lpc3250", + NULL +}; + +DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)") .atag_offset = 0x100, .map_io = lpc32xx_map_io, .init_irq = lpc32xx_init_irq, .timer = &lpc32xx_timer, - .init_machine = phy3250_board_init, + .init_machine = lpc3250_machine_init, + .dt_compat = lpc32xx_dt_compat, .restart = lpc23xx_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 5a90b9a3ab6e..ede721628150 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -2,16 +2,6 @@ if ARCH_MMP menu "Marvell PXA168/910/MMP2 Implmentations" -config MACH_MMP_DT - bool "Support MMP2 platforms from device tree" - select CPU_PXA168 - select CPU_PXA910 - select USE_OF - help - Include support for Marvell MMP2 based platforms using - the device tree. Needn't select any other machine while - MACH_MMP_DT is enabled. - config MACH_ASPENITE bool "Marvell's PXA168 Aspenite Development Board" select CPU_PXA168 @@ -94,6 +84,25 @@ config MACH_GPLUGD Say 'Y' here if you want to support the Marvell PXA168-based GuruPlug Display (gplugD) Board +config MACH_MMP_DT + bool "Support MMP (ARMv5) platforms from device tree" + select CPU_PXA168 + select CPU_PXA910 + select USE_OF + help + Include support for Marvell MMP2 based platforms using + the device tree. Needn't select any other machine while + MACH_MMP_DT is enabled. + +config MACH_MMP2_DT + bool "Support MMP2 (ARMv7) platforms from device tree" + depends on !CPU_MOHAWK + select CPU_MMP2 + select USE_OF + help + Include support for Marvell MMP2 based platforms using + the device tree. + endmenu config CPU_PXA168 diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 4fc0ff5dc96d..b920b9bfbdb6 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -2,12 +2,12 @@ # Makefile for Marvell's PXA168 processors line # -obj-y += common.o clock.o devices.o time.o +obj-y += common.o clock.o devices.o time.o irq.o # SoC support -obj-$(CONFIG_CPU_PXA168) += pxa168.o irq-pxa168.o -obj-$(CONFIG_CPU_PXA910) += pxa910.o irq-pxa168.o -obj-$(CONFIG_CPU_MMP2) += mmp2.o irq-mmp2.o sram.o +obj-$(CONFIG_CPU_PXA168) += pxa168.o +obj-$(CONFIG_CPU_PXA910) += pxa910.o +obj-$(CONFIG_CPU_MMP2) += mmp2.o sram.o # board support obj-$(CONFIG_MACH_ASPENITE) += aspenite.o @@ -19,5 +19,6 @@ obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o obj-$(CONFIG_MACH_MMP_DT) += mmp-dt.o +obj-$(CONFIG_MACH_MMP2_DT) += mmp2-dt.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o obj-$(CONFIG_MACH_GPLUGD) += gplugd.o diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S index 9cff9e7a2b26..bd152e24e6d7 100644 --- a/arch/arm/mach-mmp/include/mach/entry-macro.S +++ b/arch/arm/mach-mmp/include/mach/entry-macro.S @@ -6,13 +6,15 @@ * published by the Free Software Foundation. */ +#include <asm/irq.h> #include <mach/regs-icu.h> .macro get_irqnr_preamble, base, tmp mrc p15, 0, \tmp, c0, c0, 0 @ CPUID and \tmp, \tmp, #0xff00 cmp \tmp, #0x5800 - ldr \base, =ICU_VIRT_BASE + ldr \base, =mmp_icu_base + ldr \base, [\base, #0] addne \base, \base, #0x10c @ PJ1 AP INT SEL register addeq \base, \base, #0x104 @ PJ4 IRQ SEL register .endm diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index d0e746626a3d..fb492a50a817 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -125,7 +125,7 @@ #define IRQ_MMP2_RTC_MUX 5 #define IRQ_MMP2_TWSI1 7 #define IRQ_MMP2_GPU 8 -#define IRQ_MMP2_KEYPAD 9 +#define IRQ_MMP2_KEYPAD_MUX 9 #define IRQ_MMP2_ROTARY 10 #define IRQ_MMP2_TRACKBALL 11 #define IRQ_MMP2_ONEWIRE 12 @@ -163,11 +163,11 @@ #define IRQ_MMP2_DMA_FIQ 47 #define IRQ_MMP2_DMA_RIQ 48 #define IRQ_MMP2_GPIO 49 -#define IRQ_MMP2_SSP_MUX 51 +#define IRQ_MMP2_MIPI_HSI1_MUX 51 #define IRQ_MMP2_MMC2 52 #define IRQ_MMP2_MMC3 53 #define IRQ_MMP2_MMC4 54 -#define IRQ_MMP2_MIPI_HSI 55 +#define IRQ_MMP2_MIPI_HSI0_MUX 55 #define IRQ_MMP2_MSP 58 #define IRQ_MMP2_MIPI_SLIM_DMA 59 #define IRQ_MMP2_PJ4_FREQ_CHG 60 @@ -186,8 +186,14 @@ #define IRQ_MMP2_RTC_ALARM (IRQ_MMP2_RTC_BASE + 0) #define IRQ_MMP2_RTC (IRQ_MMP2_RTC_BASE + 1) +/* secondary interrupt of INT #9 */ +#define IRQ_MMP2_KEYPAD_BASE (IRQ_MMP2_RTC_BASE + 2) +#define IRQ_MMP2_KPC (IRQ_MMP2_KEYPAD_BASE + 0) +#define IRQ_MMP2_ROTORY (IRQ_MMP2_KEYPAD_BASE + 1) +#define IRQ_MMP2_TBALL (IRQ_MMP2_KEYPAD_BASE + 2) + /* secondary interrupt of INT #17 */ -#define IRQ_MMP2_TWSI_BASE (IRQ_MMP2_RTC_BASE + 2) +#define IRQ_MMP2_TWSI_BASE (IRQ_MMP2_KEYPAD_BASE + 3) #define IRQ_MMP2_TWSI2 (IRQ_MMP2_TWSI_BASE + 0) #define IRQ_MMP2_TWSI3 (IRQ_MMP2_TWSI_BASE + 1) #define IRQ_MMP2_TWSI4 (IRQ_MMP2_TWSI_BASE + 2) @@ -212,11 +218,16 @@ #define IRQ_MMP2_COMMRX (IRQ_MMP2_MISC_BASE + 14) /* secondary interrupt of INT #51 */ -#define IRQ_MMP2_SSP_BASE (IRQ_MMP2_MISC_BASE + 15) -#define IRQ_MMP2_SSP1_SRDY (IRQ_MMP2_SSP_BASE + 0) -#define IRQ_MMP2_SSP3_SRDY (IRQ_MMP2_SSP_BASE + 1) +#define IRQ_MMP2_MIPI_HSI1_BASE (IRQ_MMP2_MISC_BASE + 15) +#define IRQ_MMP2_HSI1_CAWAKE (IRQ_MMP2_MIPI_HSI1_BASE + 0) +#define IRQ_MMP2_MIPI_HSI_INT1 (IRQ_MMP2_MIPI_HSI1_BASE + 1) + +/* secondary interrupt of INT #55 */ +#define IRQ_MMP2_MIPI_HSI0_BASE (IRQ_MMP2_MIPI_HSI1_BASE + 2) +#define IRQ_MMP2_HSI0_CAWAKE (IRQ_MMP2_MIPI_HSI0_BASE + 0) +#define IRQ_MMP2_MIPI_HSI_INT0 (IRQ_MMP2_MIPI_HSI0_BASE + 1) -#define IRQ_MMP2_MUX_END (IRQ_MMP2_SSP_BASE + 2) +#define IRQ_MMP2_MUX_END (IRQ_MMP2_MIPI_HSI0_BASE + 2) #define IRQ_GPIO_START 128 #define MMP_NR_BUILTIN_GPIO 192 diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c deleted file mode 100644 index 7895d277421e..000000000000 --- a/arch/arm/mach-mmp/irq-mmp2.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/irq-mmp2.c - * - * Generic IRQ handling, GPIO IRQ demultiplexing, etc. - * - * Author: Haojian Zhuang <haojian.zhuang@marvell.com> - * Copyright: Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <mach/irqs.h> -#include <mach/regs-icu.h> -#include <mach/mmp2.h> - -#include "common.h" - -static void icu_mask_irq(struct irq_data *d) -{ - uint32_t r = __raw_readl(ICU_INT_CONF(d->irq)); - - r &= ~ICU_INT_ROUTE_PJ4_IRQ; - __raw_writel(r, ICU_INT_CONF(d->irq)); -} - -static void icu_unmask_irq(struct irq_data *d) -{ - uint32_t r = __raw_readl(ICU_INT_CONF(d->irq)); - - r |= ICU_INT_ROUTE_PJ4_IRQ; - __raw_writel(r, ICU_INT_CONF(d->irq)); -} - -static struct irq_chip icu_irq_chip = { - .name = "icu_irq", - .irq_mask = icu_mask_irq, - .irq_mask_ack = icu_mask_irq, - .irq_unmask = icu_unmask_irq, -}; - -static void pmic_irq_ack(struct irq_data *d) -{ - if (d->irq == IRQ_MMP2_PMIC) - mmp2_clear_pmic_int(); -} - -#define SECOND_IRQ_MASK(_name_, irq_base, prefix) \ -static void _name_##_mask_irq(struct irq_data *d) \ -{ \ - uint32_t r; \ - r = __raw_readl(prefix##_MASK) | (1 << (d->irq - irq_base)); \ - __raw_writel(r, prefix##_MASK); \ -} - -#define SECOND_IRQ_UNMASK(_name_, irq_base, prefix) \ -static void _name_##_unmask_irq(struct irq_data *d) \ -{ \ - uint32_t r; \ - r = __raw_readl(prefix##_MASK) & ~(1 << (d->irq - irq_base)); \ - __raw_writel(r, prefix##_MASK); \ -} - -#define SECOND_IRQ_DEMUX(_name_, irq_base, prefix) \ -static void _name_##_irq_demux(unsigned int irq, struct irq_desc *desc) \ -{ \ - unsigned long status, mask, n; \ - mask = __raw_readl(prefix##_MASK); \ - while (1) { \ - status = __raw_readl(prefix##_STATUS) & ~mask; \ - if (status == 0) \ - break; \ - n = find_first_bit(&status, BITS_PER_LONG); \ - while (n < BITS_PER_LONG) { \ - generic_handle_irq(irq_base + n); \ - n = find_next_bit(&status, BITS_PER_LONG, n+1); \ - } \ - } \ -} - -#define SECOND_IRQ_CHIP(_name_, irq_base, prefix) \ -SECOND_IRQ_MASK(_name_, irq_base, prefix) \ -SECOND_IRQ_UNMASK(_name_, irq_base, prefix) \ -SECOND_IRQ_DEMUX(_name_, irq_base, prefix) \ -static struct irq_chip _name_##_irq_chip = { \ - .name = #_name_, \ - .irq_mask = _name_##_mask_irq, \ - .irq_unmask = _name_##_unmask_irq, \ -} - -SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4); -SECOND_IRQ_CHIP(rtc, IRQ_MMP2_RTC_BASE, MMP2_ICU_INT5); -SECOND_IRQ_CHIP(twsi, IRQ_MMP2_TWSI_BASE, MMP2_ICU_INT17); -SECOND_IRQ_CHIP(misc, IRQ_MMP2_MISC_BASE, MMP2_ICU_INT35); -SECOND_IRQ_CHIP(ssp, IRQ_MMP2_SSP_BASE, MMP2_ICU_INT51); - -static void init_mux_irq(struct irq_chip *chip, int start, int num) -{ - int irq; - - for (irq = start; num > 0; irq++, num--) { - struct irq_data *d = irq_get_irq_data(irq); - - /* mask and clear the IRQ */ - chip->irq_mask(d); - if (chip->irq_ack) - chip->irq_ack(d); - - irq_set_chip(irq, chip); - set_irq_flags(irq, IRQF_VALID); - irq_set_handler(irq, handle_level_irq); - } -} - -void __init mmp2_init_icu(void) -{ - int irq; - - for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) { - icu_mask_irq(irq_get_irq_data(irq)); - irq_set_chip(irq, &icu_irq_chip); - set_irq_flags(irq, IRQF_VALID); - - switch (irq) { - case IRQ_MMP2_PMIC_MUX: - case IRQ_MMP2_RTC_MUX: - case IRQ_MMP2_TWSI_MUX: - case IRQ_MMP2_MISC_MUX: - case IRQ_MMP2_SSP_MUX: - break; - default: - irq_set_handler(irq, handle_level_irq); - break; - } - } - - /* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register - * to be written to clear the interrupt - */ - pmic_irq_chip.irq_ack = pmic_irq_ack; - - init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2); - init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2); - init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5); - init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15); - init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2); - - irq_set_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux); - irq_set_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux); - irq_set_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux); - irq_set_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux); - irq_set_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux); -} diff --git a/arch/arm/mach-mmp/irq-pxa168.c b/arch/arm/mach-mmp/irq-pxa168.c deleted file mode 100644 index 89706a0d08f1..000000000000 --- a/arch/arm/mach-mmp/irq-pxa168.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/irq.c - * - * Generic IRQ handling, GPIO IRQ demultiplexing, etc. - * - * Author: Bin Yang <bin.yang@marvell.com> - * Created: Sep 30, 2008 - * Copyright: Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <mach/regs-icu.h> - -#include "common.h" - -#define IRQ_ROUTE_TO_AP (ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ) - -#define PRIORITY_DEFAULT 0x1 -#define PRIORITY_NONE 0x0 /* means IRQ disabled */ - -static void icu_mask_irq(struct irq_data *d) -{ - __raw_writel(PRIORITY_NONE, ICU_INT_CONF(d->irq)); -} - -static void icu_unmask_irq(struct irq_data *d) -{ - __raw_writel(IRQ_ROUTE_TO_AP | PRIORITY_DEFAULT, ICU_INT_CONF(d->irq)); -} - -static struct irq_chip icu_irq_chip = { - .name = "icu_irq", - .irq_ack = icu_mask_irq, - .irq_mask = icu_mask_irq, - .irq_unmask = icu_unmask_irq, -}; - -void __init icu_init_irq(void) -{ - int irq; - - for (irq = 0; irq < 64; irq++) { - icu_mask_irq(irq_get_irq_data(irq)); - irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } -} diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c new file mode 100644 index 000000000000..3705470c9f1e --- /dev/null +++ b/arch/arm/mach-mmp/irq.c @@ -0,0 +1,445 @@ +/* + * linux/arch/arm/mach-mmp/irq.c + * + * Generic IRQ handling, GPIO IRQ demultiplexing, etc. + * Copyright (C) 2008 - 2012 Marvell Technology Group Ltd. + * + * Author: Bin Yang <bin.yang@marvell.com> + * Haojian Zhuang <haojian.zhuang@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#include <mach/irqs.h> + +#include "common.h" + +#define MAX_ICU_NR 16 + +struct icu_chip_data { + int nr_irqs; + unsigned int virq_base; + unsigned int cascade_irq; + void __iomem *reg_status; + void __iomem *reg_mask; + unsigned int conf_enable; + unsigned int conf_disable; + unsigned int conf_mask; + unsigned int clr_mfp_irq_base; + unsigned int clr_mfp_hwirq; + struct irq_domain *domain; +}; + +struct mmp_intc_conf { + unsigned int conf_enable; + unsigned int conf_disable; + unsigned int conf_mask; +}; + +void __iomem *mmp_icu_base; +static struct icu_chip_data icu_data[MAX_ICU_NR]; +static int max_icu_nr; + +extern void mmp2_clear_pmic_int(void); + +static void icu_mask_ack_irq(struct irq_data *d) +{ + struct irq_domain *domain = d->domain; + struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data; + int hwirq; + u32 r; + + hwirq = d->irq - data->virq_base; + if (data == &icu_data[0]) { + r = readl_relaxed(mmp_icu_base + (hwirq << 2)); + r &= ~data->conf_mask; + r |= data->conf_disable; + writel_relaxed(r, mmp_icu_base + (hwirq << 2)); + } else { +#ifdef CONFIG_CPU_MMP2 + if ((data->virq_base == data->clr_mfp_irq_base) + && (hwirq == data->clr_mfp_hwirq)) + mmp2_clear_pmic_int(); +#endif + r = readl_relaxed(data->reg_mask) | (1 << hwirq); + writel_relaxed(r, data->reg_mask); + } +} + +static void icu_mask_irq(struct irq_data *d) +{ + struct irq_domain *domain = d->domain; + struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data; + int hwirq; + u32 r; + + hwirq = d->irq - data->virq_base; + if (data == &icu_data[0]) { + r = readl_relaxed(mmp_icu_base + (hwirq << 2)); + r &= ~data->conf_mask; + r |= data->conf_disable; + writel_relaxed(r, mmp_icu_base + (hwirq << 2)); + } else { + r = readl_relaxed(data->reg_mask) | (1 << hwirq); + writel_relaxed(r, data->reg_mask); + } +} + +static void icu_unmask_irq(struct irq_data *d) +{ + struct irq_domain *domain = d->domain; + struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data; + int hwirq; + u32 r; + + hwirq = d->irq - data->virq_base; + if (data == &icu_data[0]) { + r = readl_relaxed(mmp_icu_base + (hwirq << 2)); + r &= ~data->conf_mask; + r |= data->conf_enable; + writel_relaxed(r, mmp_icu_base + (hwirq << 2)); + } else { + r = readl_relaxed(data->reg_mask) & ~(1 << hwirq); + writel_relaxed(r, data->reg_mask); + } +} + +static struct irq_chip icu_irq_chip = { + .name = "icu_irq", + .irq_mask = icu_mask_irq, + .irq_mask_ack = icu_mask_ack_irq, + .irq_unmask = icu_unmask_irq, +}; + +static void icu_mux_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + struct irq_domain *domain; + struct icu_chip_data *data; + int i; + unsigned long mask, status, n; + + for (i = 1; i < max_icu_nr; i++) { + if (irq == icu_data[i].cascade_irq) { + domain = icu_data[i].domain; + data = (struct icu_chip_data *)domain->host_data; + break; + } + } + if (i >= max_icu_nr) { + pr_err("Spurious irq %d in MMP INTC\n", irq); + return; + } + + mask = readl_relaxed(data->reg_mask); + while (1) { + status = readl_relaxed(data->reg_status) & ~mask; + if (status == 0) + break; + n = find_first_bit(&status, BITS_PER_LONG); + while (n < BITS_PER_LONG) { + generic_handle_irq(icu_data[i].virq_base + n); + n = find_next_bit(&status, BITS_PER_LONG, n + 1); + } + } +} + +static int mmp_irq_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + return 0; +} + +static int mmp_irq_domain_xlate(struct irq_domain *d, struct device_node *node, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + *out_hwirq = intspec[0]; + return 0; +} + +const struct irq_domain_ops mmp_irq_domain_ops = { + .map = mmp_irq_domain_map, + .xlate = mmp_irq_domain_xlate, +}; + +static struct mmp_intc_conf mmp_conf = { + .conf_enable = 0x51, + .conf_disable = 0x0, + .conf_mask = 0x7f, +}; + +static struct mmp_intc_conf mmp2_conf = { + .conf_enable = 0x20, + .conf_disable = 0x0, + .conf_mask = 0x7f, +}; + +/* MMP (ARMv5) */ +void __init icu_init_irq(void) +{ + int irq; + + max_icu_nr = 1; + mmp_icu_base = ioremap(0xd4282000, 0x1000); + icu_data[0].conf_enable = mmp_conf.conf_enable; + icu_data[0].conf_disable = mmp_conf.conf_disable; + icu_data[0].conf_mask = mmp_conf.conf_mask; + icu_data[0].nr_irqs = 64; + icu_data[0].virq_base = 0; + icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0, + &irq_domain_simple_ops, + &icu_data[0]); + for (irq = 0; irq < 64; irq++) { + icu_mask_irq(irq_get_irq_data(irq)); + irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + irq_set_default_host(icu_data[0].domain); +} + +/* MMP2 (ARMv7) */ +void __init mmp2_init_icu(void) +{ + int irq; + + max_icu_nr = 8; + mmp_icu_base = ioremap(0xd4282000, 0x1000); + icu_data[0].conf_enable = mmp2_conf.conf_enable; + icu_data[0].conf_disable = mmp2_conf.conf_disable; + icu_data[0].conf_mask = mmp2_conf.conf_mask; + icu_data[0].nr_irqs = 64; + icu_data[0].virq_base = 0; + icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0, + &irq_domain_simple_ops, + &icu_data[0]); + icu_data[1].reg_status = mmp_icu_base + 0x150; + icu_data[1].reg_mask = mmp_icu_base + 0x168; + icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE; + icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE; + icu_data[1].nr_irqs = 2; + icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE; + icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs, + icu_data[1].virq_base, 0, + &irq_domain_simple_ops, + &icu_data[1]); + icu_data[2].reg_status = mmp_icu_base + 0x154; + icu_data[2].reg_mask = mmp_icu_base + 0x16c; + icu_data[2].nr_irqs = 2; + icu_data[2].virq_base = IRQ_MMP2_RTC_BASE; + icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs, + icu_data[2].virq_base, 0, + &irq_domain_simple_ops, + &icu_data[2]); + icu_data[3].reg_status = mmp_icu_base + 0x180; + icu_data[3].reg_mask = mmp_icu_base + 0x17c; + icu_data[3].nr_irqs = 3; + icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE; + icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs, + icu_data[3].virq_base, 0, + &irq_domain_simple_ops, + &icu_data[3]); + icu_data[4].reg_status = mmp_icu_base + 0x158; + icu_data[4].reg_mask = mmp_icu_base + 0x170; + icu_data[4].nr_irqs = 5; + icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE; + icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs, + icu_data[4].virq_base, 0, + &irq_domain_simple_ops, + &icu_data[4]); + icu_data[5].reg_status = mmp_icu_base + 0x15c; + icu_data[5].reg_mask = mmp_icu_base + 0x174; + icu_data[5].nr_irqs = 15; + icu_data[5].virq_base = IRQ_MMP2_MISC_BASE; + icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs, + icu_data[5].virq_base, 0, + &irq_domain_simple_ops, + &icu_data[5]); + icu_data[6].reg_status = mmp_icu_base + 0x160; + icu_data[6].reg_mask = mmp_icu_base + 0x178; + icu_data[6].nr_irqs = 2; + icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE; + icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs, + icu_data[6].virq_base, 0, + &irq_domain_simple_ops, + &icu_data[6]); + icu_data[7].reg_status = mmp_icu_base + 0x188; + icu_data[7].reg_mask = mmp_icu_base + 0x184; + icu_data[7].nr_irqs = 2; + icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE; + icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs, + icu_data[7].virq_base, 0, + &irq_domain_simple_ops, + &icu_data[7]); + for (irq = 0; irq < IRQ_MMP2_MUX_END; irq++) { + icu_mask_irq(irq_get_irq_data(irq)); + switch (irq) { + case IRQ_MMP2_PMIC_MUX: + case IRQ_MMP2_RTC_MUX: + case IRQ_MMP2_KEYPAD_MUX: + case IRQ_MMP2_TWSI_MUX: + case IRQ_MMP2_MISC_MUX: + case IRQ_MMP2_MIPI_HSI1_MUX: + case IRQ_MMP2_MIPI_HSI0_MUX: + irq_set_chip(irq, &icu_irq_chip); + irq_set_chained_handler(irq, icu_mux_irq_demux); + break; + default: + irq_set_chip_and_handler(irq, &icu_irq_chip, + handle_level_irq); + break; + } + set_irq_flags(irq, IRQF_VALID); + } + irq_set_default_host(icu_data[0].domain); +} + +#ifdef CONFIG_OF +static const struct of_device_id intc_ids[] __initconst = { + { .compatible = "mrvl,mmp-intc", .data = &mmp_conf }, + { .compatible = "mrvl,mmp2-intc", .data = &mmp2_conf }, + {} +}; + +static const struct of_device_id mmp_mux_irq_match[] __initconst = { + { .compatible = "mrvl,mmp2-mux-intc" }, + {} +}; + +int __init mmp2_mux_init(struct device_node *parent) +{ + struct device_node *node; + const struct of_device_id *of_id; + struct resource res; + int i, irq_base, ret, irq; + u32 nr_irqs, mfp_irq; + + node = parent; + max_icu_nr = 1; + for (i = 1; i < MAX_ICU_NR; i++) { + node = of_find_matching_node(node, mmp_mux_irq_match); + if (!node) + break; + of_id = of_match_node(&mmp_mux_irq_match[0], node); + ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", + &nr_irqs); + if (ret) { + pr_err("Not found mrvl,intc-nr-irqs property\n"); + ret = -EINVAL; + goto err; + } + ret = of_address_to_resource(node, 0, &res); + if (ret < 0) { + pr_err("Not found reg property\n"); + ret = -EINVAL; + goto err; + } + icu_data[i].reg_status = mmp_icu_base + res.start; + ret = of_address_to_resource(node, 1, &res); + if (ret < 0) { + pr_err("Not found reg property\n"); + ret = -EINVAL; + goto err; + } + icu_data[i].reg_mask = mmp_icu_base + res.start; + icu_data[i].cascade_irq = irq_of_parse_and_map(node, 0); + if (!icu_data[i].cascade_irq) { + ret = -EINVAL; + goto err; + } + + irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); + if (irq_base < 0) { + pr_err("Failed to allocate IRQ numbers for mux intc\n"); + ret = irq_base; + goto err; + } + if (!of_property_read_u32(node, "mrvl,clr-mfp-irq", + &mfp_irq)) { + icu_data[i].clr_mfp_irq_base = irq_base; + icu_data[i].clr_mfp_hwirq = mfp_irq; + } + irq_set_chained_handler(icu_data[i].cascade_irq, + icu_mux_irq_demux); + icu_data[i].nr_irqs = nr_irqs; + icu_data[i].virq_base = irq_base; + icu_data[i].domain = irq_domain_add_legacy(node, nr_irqs, + irq_base, 0, + &mmp_irq_domain_ops, + &icu_data[i]); + for (irq = irq_base; irq < irq_base + nr_irqs; irq++) + icu_mask_irq(irq_get_irq_data(irq)); + } + max_icu_nr = i; + return 0; +err: + of_node_put(node); + max_icu_nr = i; + return ret; +} + +void __init mmp_dt_irq_init(void) +{ + struct device_node *node; + const struct of_device_id *of_id; + struct mmp_intc_conf *conf; + int nr_irqs, irq_base, ret, irq; + + node = of_find_matching_node(NULL, intc_ids); + if (!node) { + pr_err("Failed to find interrupt controller in arch-mmp\n"); + return; + } + of_id = of_match_node(intc_ids, node); + conf = of_id->data; + + ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", &nr_irqs); + if (ret) { + pr_err("Not found mrvl,intc-nr-irqs property\n"); + return; + } + + mmp_icu_base = of_iomap(node, 0); + if (!mmp_icu_base) { + pr_err("Failed to get interrupt controller register\n"); + return; + } + + irq_base = irq_alloc_descs(-1, 0, nr_irqs - NR_IRQS_LEGACY, 0); + if (irq_base < 0) { + pr_err("Failed to allocate IRQ numbers\n"); + goto err; + } else if (irq_base != NR_IRQS_LEGACY) { + pr_err("ICU's irqbase should be started from 0\n"); + goto err; + } + icu_data[0].conf_enable = conf->conf_enable; + icu_data[0].conf_disable = conf->conf_disable; + icu_data[0].conf_mask = conf->conf_mask; + icu_data[0].nr_irqs = nr_irqs; + icu_data[0].virq_base = 0; + icu_data[0].domain = irq_domain_add_legacy(node, nr_irqs, 0, 0, + &mmp_irq_domain_ops, + &icu_data[0]); + irq_set_default_host(icu_data[0].domain); + for (irq = 0; irq < nr_irqs; irq++) + icu_mask_irq(irq_get_irq_data(irq)); + mmp2_mux_init(node); + return; +err: + iounmap(mmp_icu_base); +} +#endif diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index 67075395e400..033cc31b3c72 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -14,14 +14,19 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> #include <mach/irqs.h> #include "common.h" -extern struct sys_timer pxa168_timer; -extern void __init icu_init_irq(void); +extern void __init mmp_dt_irq_init(void); +extern void __init mmp_dt_init_timer(void); -static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = { +static struct sys_timer mmp_dt_timer = { + .init = mmp_dt_init_timer, +}; + +static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL), OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL), @@ -32,44 +37,47 @@ static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = { {} }; -static int __init mmp_intc_add_irq_domain(struct device_node *np, - struct device_node *parent) -{ - irq_domain_add_simple(np, 0); - return 0; -} - -static int __init mmp_gpio_add_irq_domain(struct device_node *np, - struct device_node *parent) -{ - irq_domain_add_simple(np, IRQ_GPIO_START); - return 0; -} - -static const struct of_device_id mmp_irq_match[] __initconst = { - { .compatible = "mrvl,mmp-intc", .data = mmp_intc_add_irq_domain, }, - { .compatible = "mrvl,mmp-gpio", .data = mmp_gpio_add_irq_domain, }, +static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL), + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL), + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL), + OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), + OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL), + OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; -static void __init mmp_dt_init(void) +static void __init pxa168_dt_init(void) { + of_platform_populate(NULL, of_default_bus_match_table, + pxa168_auxdata_lookup, NULL); +} - of_irq_init(mmp_irq_match); - +static void __init pxa910_dt_init(void) +{ of_platform_populate(NULL, of_default_bus_match_table, - mmp_auxdata_lookup, NULL); + pxa910_auxdata_lookup, NULL); } -static const char *pxa168_dt_board_compat[] __initdata = { +static const char *mmp_dt_board_compat[] __initdata = { "mrvl,pxa168-aspenite", + "mrvl,pxa910-dkb", NULL, }; DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)") .map_io = mmp_map_io, - .init_irq = icu_init_irq, - .timer = &pxa168_timer, - .init_machine = mmp_dt_init, - .dt_compat = pxa168_dt_board_compat, + .init_irq = mmp_dt_irq_init, + .timer = &mmp_dt_timer, + .init_machine = pxa168_dt_init, + .dt_compat = mmp_dt_board_compat, +MACHINE_END + +DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)") + .map_io = mmp_map_io, + .init_irq = mmp_dt_irq_init, + .timer = &mmp_dt_timer, + .init_machine = pxa910_dt_init, + .dt_compat = mmp_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c new file mode 100644 index 000000000000..535a5ed5977b --- /dev/null +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -0,0 +1,60 @@ +/* + * linux/arch/arm/mach-mmp/mmp2-dt.c + * + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/irqs.h> +#include <mach/regs-apbc.h> + +#include "common.h" + +extern void __init mmp_dt_irq_init(void); +extern void __init mmp_dt_init_timer(void); + +static struct sys_timer mmp_dt_timer = { + .init = mmp_dt_init_timer, +}; + +static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL), + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL), + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.2", NULL), + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL), + OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), + OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL), + OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), + {} +}; + +static void __init mmp2_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + mmp2_auxdata_lookup, NULL); +} + +static const char *mmp2_dt_board_compat[] __initdata = { + "mrvl,mmp2-brownstone", + NULL, +}; + +DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)") + .map_io = mmp_map_io, + .init_irq = mmp_dt_irq_init, + .timer = &mmp_dt_timer, + .init_machine = mmp2_dt_init, + .dt_compat = mmp2_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 71fc4ee4602c..936447c70977 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -25,6 +25,9 @@ #include <linux/io.h> #include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/sched_clock.h> #include <mach/addr-map.h> @@ -41,6 +44,8 @@ #define MAX_DELTA (0xfffffffe) #define MIN_DELTA (16) +static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE; + /* * FIXME: the timer needs some delay to stablize the counter capture */ @@ -48,12 +53,12 @@ static inline uint32_t timer_read(void) { int delay = 100; - __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1)); + __raw_writel(1, mmp_timer_base + TMR_CVWR(1)); while (delay--) cpu_relax(); - return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1)); + return __raw_readl(mmp_timer_base + TMR_CVWR(1)); } static u32 notrace mmp_read_sched_clock(void) @@ -68,12 +73,12 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) /* * Clear pending interrupt status. */ - __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); + __raw_writel(0x01, mmp_timer_base + TMR_ICR(0)); /* * Disable timer 0. */ - __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + __raw_writel(0x02, mmp_timer_base + TMR_CER); c->event_handler(c); @@ -90,23 +95,23 @@ static int timer_set_next_event(unsigned long delta, /* * Disable timer 0. */ - __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + __raw_writel(0x02, mmp_timer_base + TMR_CER); /* * Clear and enable timer match 0 interrupt. */ - __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); - __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0)); + __raw_writel(0x01, mmp_timer_base + TMR_ICR(0)); + __raw_writel(0x01, mmp_timer_base + TMR_IER(0)); /* * Setup new clockevent timer value. */ - __raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + __raw_writel(delta - 1, mmp_timer_base + TMR_TN_MM(0, 0)); /* * Enable timer 0. */ - __raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER); + __raw_writel(0x03, mmp_timer_base + TMR_CER); local_irq_restore(flags); @@ -124,7 +129,7 @@ static void timer_set_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: /* disable the matching interrupt */ - __raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0)); + __raw_writel(0x00, mmp_timer_base + TMR_IER(0)); break; case CLOCK_EVT_MODE_RESUME: case CLOCK_EVT_MODE_PERIODIC: @@ -157,27 +162,27 @@ static struct clocksource cksrc = { static void __init timer_config(void) { - uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR); + uint32_t ccr = __raw_readl(mmp_timer_base + TMR_CCR); - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */ + __raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */ ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3)); - __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR); + __raw_writel(ccr, mmp_timer_base + TMR_CCR); /* set timer 0 to periodic mode, and timer 1 to free-running mode */ - __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR); + __raw_writel(0x2, mmp_timer_base + TMR_CMR); - __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */ - __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */ - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); + __raw_writel(0x1, mmp_timer_base + TMR_PLCR(0)); /* periodic */ + __raw_writel(0x7, mmp_timer_base + TMR_ICR(0)); /* clear status */ + __raw_writel(0x0, mmp_timer_base + TMR_IER(0)); - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */ - __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1)); /* clear status */ - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1)); + __raw_writel(0x0, mmp_timer_base + TMR_PLCR(1)); /* free-running */ + __raw_writel(0x7, mmp_timer_base + TMR_ICR(1)); /* clear status */ + __raw_writel(0x0, mmp_timer_base + TMR_IER(1)); /* enable timer 1 counter */ - __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER); + __raw_writel(0x2, mmp_timer_base + TMR_CER); } static struct irqaction timer_irq = { @@ -203,3 +208,37 @@ void __init timer_init(int irq) clocksource_register_hz(&cksrc, CLOCK_TICK_RATE); clockevents_register_device(&ckevt); } + +#ifdef CONFIG_OF +static struct of_device_id mmp_timer_dt_ids[] = { + { .compatible = "mrvl,mmp-timer", }, + {} +}; + +void __init mmp_dt_init_timer(void) +{ + struct device_node *np; + int irq, ret; + + np = of_find_matching_node(NULL, mmp_timer_dt_ids); + if (!np) { + ret = -ENODEV; + goto out; + } + + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + ret = -EINVAL; + goto out; + } + mmp_timer_base = of_iomap(np, 0); + if (!mmp_timer_base) { + ret = -ENOMEM; + goto out; + } + timer_init(irq); + return; +out: + pr_err("Failed to get timer from device tree with error:%d\n", ret); +} +#endif diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 098d183a0086..7302ba7ff1b9 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -15,7 +15,6 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/irqdomain.h> -#include <linux/i2c/twl.h> #include <mach/hardware.h> #include <asm/hardware/gic.h> @@ -95,22 +94,6 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP3 -static struct twl4030_platform_data beagle_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, -}; - -static void __init omap3_i2c_init(void) -{ - omap3_pmic_init("twl4030", &beagle_twldata); -} - -static void __init omap3_init(void) -{ - omap3_i2c_init(); - omap_generic_init(); -} - static const char *omap3_boards_compat[] __initdata = { "ti,omap3", NULL, @@ -122,7 +105,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_early = omap3430_init_early, .init_irq = omap_init_irq, .handle_irq = omap3_intc_handle_irq, - .init_machine = omap3_init, + .init_machine = omap_generic_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, .restart = omap_prcm_restart, @@ -130,22 +113,6 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP4 -static struct twl4030_platform_data sdp4430_twldata = { - .irq_base = TWL6030_IRQ_BASE, - .irq_end = TWL6030_IRQ_END, -}; - -static void __init omap4_i2c_init(void) -{ - omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); -} - -static void __init omap4_init(void) -{ - omap4_i2c_init(); - omap_generic_init(); -} - static const char *omap4_boards_compat[] __initdata = { "ti,omap4", NULL, @@ -157,7 +124,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .init_early = omap4430_init_early, .init_irq = omap_init_irq, .handle_irq = gic_handle_irq, - .init_machine = omap4_init, + .init_machine = omap_generic_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, .restart = omap_prcm_restart, diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index f3953a499286..84fa55b4c8b9 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -700,11 +700,14 @@ static int __init omap2_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_audio(); - omap_init_mcpdm(); - omap_init_dmic(); omap_init_camera(); omap_init_mbox(); - omap_init_mcspi(); + /* If dtb is there, the devices will be created dynamically */ + if (!of_have_populated_dt()) { + omap_init_dmic(); + omap_init_mcpdm(); + omap_init_mcspi(); + } omap_init_pmu(); omap_hdq_init(); omap_init_sti(); diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 064cab03d2bd..a80e093b039f 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -20,6 +20,7 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/interrupt.h> +#include <linux/of.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> @@ -146,7 +147,10 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) */ static int __init omap2_gpio_init(void) { - return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, - NULL); + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + + return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL); } postcore_initcall(omap2_gpio_init); diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c index 8103f9644e2d..550cfc2a1f2e 100644 --- a/arch/arm/mach-pnx4008/i2c.c +++ b/arch/arm/mach-pnx4008/i2c.c @@ -16,48 +16,62 @@ #include <linux/err.h> #include <mach/platform.h> #include <mach/irqs.h> -#include <mach/i2c.h> -static struct i2c_pnx_data i2c0_data = { - .name = I2C_CHIP_NAME "0", - .base = PNX4008_I2C1_BASE, - .irq = I2C_1_INT, +static struct resource i2c0_resources[] = { + { + .start = PNX4008_I2C1_BASE, + .end = PNX4008_I2C1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = I2C_1_INT, + .end = I2C_1_INT, + .flags = IORESOURCE_IRQ, + }, }; -static struct i2c_pnx_data i2c1_data = { - .name = I2C_CHIP_NAME "1", - .base = PNX4008_I2C2_BASE, - .irq = I2C_2_INT, +static struct resource i2c1_resources[] = { + { + .start = PNX4008_I2C2_BASE, + .end = PNX4008_I2C2_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = I2C_2_INT, + .end = I2C_2_INT, + .flags = IORESOURCE_IRQ, + }, }; -static struct i2c_pnx_data i2c2_data = { - .name = "USB-I2C", - .base = (PNX4008_USB_CONFIG_BASE + 0x300), - .irq = USB_I2C_INT, +static struct resource i2c2_resources[] = { + { + .start = PNX4008_USB_CONFIG_BASE + 0x300, + .end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = USB_I2C_INT, + .end = USB_I2C_INT, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device i2c0_device = { - .name = "pnx-i2c", + .name = "pnx-i2c.0", .id = 0, - .dev = { - .platform_data = &i2c0_data, - }, + .resource = i2c0_resources, + .num_resources = ARRAY_SIZE(i2c0_resources), }; static struct platform_device i2c1_device = { - .name = "pnx-i2c", + .name = "pnx-i2c.1", .id = 1, - .dev = { - .platform_data = &i2c1_data, - }, + .resource = i2c1_resources, + .num_resources = ARRAY_SIZE(i2c1_resources), }; static struct platform_device i2c2_device = { - .name = "pnx-i2c", + .name = "pnx-i2c.2", .id = 2, - .dev = { - .platform_data = &i2c2_data, - }, + .resource = i2c2_resources, + .num_resources = ARRAY_SIZE(i2c2_resources), }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-pnx4008/include/mach/i2c.h b/arch/arm/mach-pnx4008/include/mach/i2c.h deleted file mode 100644 index 259ac53abf40..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/i2c.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * PNX4008-specific tweaks for I2C IP3204 block - * - * Author: Vitaly Wool <vwool@ru.mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARCH_I2C_H__ -#define __ASM_ARCH_I2C_H__ - -enum { - mstatus_tdi = 0x00000001, - mstatus_afi = 0x00000002, - mstatus_nai = 0x00000004, - mstatus_drmi = 0x00000008, - mstatus_active = 0x00000020, - mstatus_scl = 0x00000040, - mstatus_sda = 0x00000080, - mstatus_rff = 0x00000100, - mstatus_rfe = 0x00000200, - mstatus_tff = 0x00000400, - mstatus_tfe = 0x00000800, -}; - -enum { - mcntrl_tdie = 0x00000001, - mcntrl_afie = 0x00000002, - mcntrl_naie = 0x00000004, - mcntrl_drmie = 0x00000008, - mcntrl_daie = 0x00000020, - mcntrl_rffie = 0x00000040, - mcntrl_tffie = 0x00000080, - mcntrl_reset = 0x00000100, - mcntrl_cdbmode = 0x00000400, -}; - -enum { - rw_bit = 1 << 0, - start_bit = 1 << 8, - stop_bit = 1 << 9, -}; - -#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */ -#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */ -#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */ -#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */ -#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */ -#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */ -#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */ -#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */ -#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */ -#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */ -#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */ -#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */ -#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */ - -#define HCLK_MHZ 13 -#define I2C_CHIP_NAME "PNX4008-I2C" - -#endif /* __ASM_ARCH_I2C_H___ */ diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index c85e6ecda606..ff5f12fd742f 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -3,6 +3,8 @@ extern void shmobile_earlytimer_init(void); extern struct sys_timer shmobile_timer; +extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz, + unsigned int mult, unsigned int div); struct twd_local_timer; extern void shmobile_setup_console(void); extern void shmobile_secondary_vector(void); diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/include/mach/intc.h index 8b22258c8caa..a5603c76cfe0 100644 --- a/arch/arm/mach-shmobile/include/mach/intc.h +++ b/arch/arm/mach-shmobile/include/mach/intc.h @@ -142,6 +142,50 @@ static struct intc_desc p ## _desc __initdata = { \ p ## _sense_registers, p ## _ack_registers) \ } +#define INTC_IRQ_PINS_16H(p, base, vect, str) \ + \ +static struct resource p ## _resources[] __initdata = { \ + [0] = { \ + .start = base, \ + .end = base + 0x64, \ + .flags = IORESOURCE_MEM, \ + }, \ +}; \ + \ +enum { \ + p ## _UNUSED = 0, \ + INTC_IRQ_PINS_ENUM_16H(p), \ +}; \ + \ +static struct intc_vect p ## _vectors[] __initdata = { \ + INTC_IRQ_PINS_VECT_16H(p, vect), \ +}; \ + \ +static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ + INTC_IRQ_PINS_MASK_16H(p, base), \ +}; \ + \ +static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ + INTC_IRQ_PINS_PRIO_16H(p, base), \ +}; \ + \ +static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ + INTC_IRQ_PINS_SENSE_16H(p, base), \ +}; \ + \ +static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ + INTC_IRQ_PINS_ACK_16H(p, base), \ +}; \ + \ +static struct intc_desc p ## _desc __initdata = { \ + .name = str, \ + .resource = p ## _resources, \ + .num_resources = ARRAY_SIZE(p ## _resources), \ + .hw = INTC_HW_DESC(p ## _vectors, NULL, \ + p ## _mask_registers, p ## _prio_registers, \ + p ## _sense_registers, p ## _ack_registers) \ +} + #define INTC_IRQ_PINS_32(p, base, vect, str) \ \ static struct resource p ## _resources[] __initdata = { \ diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index 4e686cc201fc..06a5da3c3050 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -7,7 +7,7 @@ #define gic_spi(nr) ((nr) + 32) /* INTCS */ -#define INTCS_VECT_BASE 0x2200 +#define INTCS_VECT_BASE 0x3400 #define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) #define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 6447e0af52d4..2587a22842f2 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/sh_intc.h> @@ -305,14 +306,16 @@ static DECLARE_INTC_DESC(intca_desc, "sh7372-intca", intca_mask_registers, intca_prio_registers, NULL); -INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, - INTC_VECT, "sh7372-intca-irq-pins"); +INTC_IRQ_PINS_16(intca_irq_pins_lo, 0xe6900000, + INTC_VECT, "sh7372-intca-irq-lo"); + +INTC_IRQ_PINS_16H(intca_irq_pins_hi, 0xe6900000, + INTC_VECT, "sh7372-intca-irq-hi"); + enum { UNUSED_INTCS = 0, ENABLED_INTCS, - INTCS, - /* interrupt sources INTCS */ /* IRQ0S - IRQ31S */ @@ -426,8 +429,6 @@ static struct intc_vect intcs_vectors[] = { INTCS_VECT(CPORTS2R, 0x1a20), /* CEC */ INTCS_VECT(JPU6E, 0x1a80), - - INTC_VECT(INTCS, 0xf80), }; static struct intc_group intcs_groups[] __initdata = { @@ -490,9 +491,6 @@ static struct intc_mask_reg intcs_mask_registers[] = { { 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */ { MFIS2_INTCS, CPORTS2R, 0, 0, JPU6E, 0, 0, 0 } }, - { 0xffd20104, 0, 16, /* INTAMASK */ - { 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, INTCS } }, }; /* Priority is needed for INTCA to receive the INTCS interrupt */ @@ -557,18 +555,30 @@ static void __iomem *intcs_ffd5; void __init sh7372_init_irq(void) { void __iomem *intevtsa; + int n; intcs_ffd2 = ioremap_nocache(0xffd20000, PAGE_SIZE); intevtsa = intcs_ffd2 + 0x100; intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE); register_intc_controller(&intca_desc); - register_intc_controller(&intca_irq_pins_desc); + register_intc_controller(&intca_irq_pins_lo_desc); + register_intc_controller(&intca_irq_pins_hi_desc); register_intc_controller(&intcs_desc); + /* setup dummy cascade chip for INTCS */ + n = evt2irq(0xf80); + irq_alloc_desc_at(n, numa_node_id()); + irq_set_chip_and_handler_name(n, &dummy_irq_chip, + handle_level_irq, "level"); + set_irq_flags(n, IRQF_VALID); /* yuck */ + /* demux using INTEVTSA */ - irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa); - irq_set_chained_handler(evt2irq(0xf80), intcs_demux); + irq_set_handler_data(n, (void *)intevtsa); + irq_set_chained_handler(n, intcs_demux); + + /* unmask INTCS in INTAMASK */ + iowrite16(0, intcs_ffd2 + 0x104); } static unsigned short ffd2[0x200]; diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 2fe8f83ca124..4c7fece5ef92 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/uio_driver.h> #include <linux/delay.h> #include <linux/input.h> @@ -1092,3 +1093,50 @@ void __init sh7372_add_early_devices(void) /* override timer setup with soc-specific code */ shmobile_timer.init = sh7372_earlytimer_init; } + +#ifdef CONFIG_USE_OF + +void __init sh7372_add_early_devices_dt(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */ + + early_platform_add_devices(sh7372_early_devices, + ARRAY_SIZE(sh7372_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); +} + +static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = { + { } +}; + +void __init sh7372_add_standard_devices_dt(void) +{ + /* clocks are setup late during boot in the case of DT */ + sh7372_clock_init(); + + platform_add_devices(sh7372_early_devices, + ARRAY_SIZE(sh7372_early_devices)); + + of_platform_populate(NULL, of_default_bus_match_table, + sh7372_auxdata_lookup, NULL); +} + +static const char *sh7372_boards_compat_dt[] __initdata = { + "renesas,sh7372", + NULL, +}; + +DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)") + .map_io = sh7372_map_io, + .init_early = sh7372_add_early_devices_dt, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = sh7372_init_irq, + .handle_irq = shmobile_handle_irq_intc, + .init_machine = sh7372_add_standard_devices_dt, + .timer = &shmobile_timer, + .dt_compat = sh7372_boards_compat_dt, +MACHINE_END + +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 8b79e7917a23..cba39d866687 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -19,9 +19,26 @@ * */ #include <linux/platform_device.h> +#include <linux/delay.h> #include <asm/mach/time.h> #include <asm/smp_twd.h> +void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, + unsigned int mult, unsigned int div) +{ + /* calculate a worst-case loops-per-jiffy value + * based on maximum cpu core mhz setting and the + * __delay() implementation in arch/arm/lib/delay.S + * + * this will result in a longer delay than expected + * when the cpu core runs on lower frequencies. + */ + + unsigned int value = (1000000 * mult) / (HZ * div); + + lpj_fine = max_cpu_core_mhz * value; +} + static void __init shmobile_late_time_init(void) { /* diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig index 2cee6b0de371..d9fe11cb6f16 100644 --- a/arch/arm/mach-spear3xx/Kconfig +++ b/arch/arm/mach-spear3xx/Kconfig @@ -5,39 +5,19 @@ if ARCH_SPEAR3XX menu "SPEAr3xx Implementations" -config BOARD_SPEAR300_EVB - bool "SPEAr300 Evaluation Board" - select MACH_SPEAR300 - help - Supports ST SPEAr300 Evaluation Board - -config BOARD_SPEAR310_EVB - bool "SPEAr310 Evaluation Board" - select MACH_SPEAR310 - help - Supports ST SPEAr310 Evaluation Board - -config BOARD_SPEAR320_EVB - bool "SPEAr320 Evaluation Board" - select MACH_SPEAR320 - help - Supports ST SPEAr320 Evaluation Board - -endmenu - config MACH_SPEAR300 - bool "SPEAr300" + bool "SPEAr300 Machine support with Device Tree" help - Supports ST SPEAr300 Machine + Supports ST SPEAr300 machine configured via the device-tree config MACH_SPEAR310 - bool "SPEAr310" + bool "SPEAr310 Machine support with Device Tree" help - Supports ST SPEAr310 Machine + Supports ST SPEAr310 machine configured via the device-tree config MACH_SPEAR320 - bool "SPEAr320" + bool "SPEAr320 Machine support with Device Tree" help - Supports ST SPEAr320 Machine - + Supports ST SPEAr320 machine configured via the device-tree +endmenu endif #ARCH_SPEAR3XX diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile index b24862489704..17b5d83cf2d5 100644 --- a/arch/arm/mach-spear3xx/Makefile +++ b/arch/arm/mach-spear3xx/Makefile @@ -3,24 +3,13 @@ # # common files -obj-y += spear3xx.o clock.o +obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o clock.o # spear300 specific files obj-$(CONFIG_MACH_SPEAR300) += spear300.o -# spear300 boards files -obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o - - # spear310 specific files obj-$(CONFIG_MACH_SPEAR310) += spear310.o -# spear310 boards files -obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o - - # spear320 specific files obj-$(CONFIG_MACH_SPEAR320) += spear320.o - -# spear320 boards files -obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot index 4674a4c221db..d93e2177e6ec 100644 --- a/arch/arm/mach-spear3xx/Makefile.boot +++ b/arch/arm/mach-spear3xx/Makefile.boot @@ -1,3 +1,7 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb +dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb +dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index 6c4841f55223..cd6c11099083 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -11,12 +11,112 @@ * warranty of any kind, whether express or implied. */ +#include <linux/clkdev.h> #include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> +#include <linux/of_platform.h> #include <asm/mach-types.h> #include <plat/clock.h> #include <mach/misc_regs.h> +#include <mach/spear.h> + +#define PLL1_CTR (MISC_BASE + 0x008) +#define PLL1_FRQ (MISC_BASE + 0x00C) +#define PLL1_MOD (MISC_BASE + 0x010) +#define PLL2_CTR (MISC_BASE + 0x014) +/* PLL_CTR register masks */ +#define PLL_ENABLE 2 +#define PLL_MODE_SHIFT 4 +#define PLL_MODE_MASK 0x3 +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSB 2 +#define PLL_MODE_DITH_SSB 3 + +#define PLL2_FRQ (MISC_BASE + 0x018) +/* PLL FRQ register masks */ +#define PLL_DIV_N_SHIFT 0 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_P_MASK 0x7 +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DITH_FDBK_M_MASK 0xFFFF + +#define PLL2_MOD (MISC_BASE + 0x01C) +#define PLL_CLK_CFG (MISC_BASE + 0x020) +#define CORE_CLK_CFG (MISC_BASE + 0x024) +/* CORE CLK CFG register masks */ +#define PLL_HCLK_RATIO_SHIFT 10 +#define PLL_HCLK_RATIO_MASK 0x3 +#define HCLK_PCLK_RATIO_SHIFT 8 +#define HCLK_PCLK_RATIO_MASK 0x3 + +#define PERIP_CLK_CFG (MISC_BASE + 0x028) +/* PERIP_CLK_CFG register masks */ +#define UART_CLK_SHIFT 4 +#define UART_CLK_MASK 0x1 +#define FIRDA_CLK_SHIFT 5 +#define FIRDA_CLK_MASK 0x3 +#define GPT0_CLK_SHIFT 8 +#define GPT1_CLK_SHIFT 11 +#define GPT2_CLK_SHIFT 12 +#define GPT_CLK_MASK 0x1 +#define AUX_CLK_PLL3_VAL 0 +#define AUX_CLK_PLL1_VAL 1 + +#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) +/* PERIP1_CLK_ENB register masks */ +#define UART_CLK_ENB 3 +#define SSP_CLK_ENB 5 +#define I2C_CLK_ENB 7 +#define JPEG_CLK_ENB 8 +#define FIRDA_CLK_ENB 10 +#define GPT1_CLK_ENB 11 +#define GPT2_CLK_ENB 12 +#define ADC_CLK_ENB 15 +#define RTC_CLK_ENB 17 +#define GPIO_CLK_ENB 18 +#define DMA_CLK_ENB 19 +#define SMI_CLK_ENB 21 +#define GMAC_CLK_ENB 23 +#define USBD_CLK_ENB 24 +#define USBH_CLK_ENB 25 +#define C3_CLK_ENB 31 + +#define RAS_CLK_ENB (MISC_BASE + 0x034) + +#define PRSC1_CLK_CFG (MISC_BASE + 0x044) +#define PRSC2_CLK_CFG (MISC_BASE + 0x048) +#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) +/* gpt synthesizer register masks */ +#define GPT_MSCALE_SHIFT 0 +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +#define AMEM_CLK_CFG (MISC_BASE + 0x050) +#define EXPI_CLK_CFG (MISC_BASE + 0x054) +#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) +#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) +#define UART_CLK_SYNT (MISC_BASE + 0x064) +#define GMAC_CLK_SYNT (MISC_BASE + 0x068) +#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) +#define RAS2_CLK_SYNT (MISC_BASE + 0x070) +#define RAS3_CLK_SYNT (MISC_BASE + 0x074) +#define RAS4_CLK_SYNT (MISC_BASE + 0x078) +/* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_SYNT_ENB 31 +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF /* root clks */ /* 32 KHz oscillator clock */ @@ -411,6 +511,21 @@ static struct clk usbd_clk = { .recalc = &follow_parent, }; +/* clock derived from usbh clk */ +/* usbh0 clock */ +static struct clk usbh0_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &usbh_clk, + .recalc = &follow_parent, +}; + +/* usbh1 clock */ +static struct clk usbh1_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &usbh_clk, + .recalc = &follow_parent, +}; + /* clock derived from ahb clk */ /* apb masks structure */ static struct bus_clk_masks apb_masks = { @@ -652,109 +767,126 @@ static struct clk pwm_clk = { /* array of all spear 3xx clock lookups */ static struct clk_lookup spear_clk_lookups[] = { - { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, + CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk), /* root clks */ - { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, - { .con_id = "osc_24m_clk", .clk = &osc_24m_clk}, + CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk), + CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk), /* clock derived from 32 KHz osc clk */ - { .dev_id = "rtc-spear", .clk = &rtc_clk}, + CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk), /* clock derived from 24 MHz osc clk */ - { .con_id = "pll1_clk", .clk = &pll1_clk}, - { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, - { .dev_id = "wdt", .clk = &wdt_clk}, + CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk), + CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk), + CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk), /* clock derived from pll1 clk */ - { .con_id = "cpu_clk", .clk = &cpu_clk}, - { .con_id = "ahb_clk", .clk = &ahb_clk}, - { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, - { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, - { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, - { .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk}, - { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, - { .dev_id = "uart", .clk = &uart_clk}, - { .dev_id = "firda", .clk = &firda_clk}, - { .dev_id = "gpt0", .clk = &gpt0_clk}, - { .dev_id = "gpt1", .clk = &gpt1_clk}, - { .dev_id = "gpt2", .clk = &gpt2_clk}, + CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk), + CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk), + CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk), + CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk), + CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk), + CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk), + CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk), + CLKDEV_INIT("d0000000.serial", NULL, &uart_clk), + CLKDEV_INIT("firda", NULL, &firda_clk), + CLKDEV_INIT("gpt0", NULL, &gpt0_clk), + CLKDEV_INIT("gpt1", NULL, &gpt1_clk), + CLKDEV_INIT("gpt2", NULL, &gpt2_clk), /* clock derived from pll3 clk */ - { .dev_id = "designware_udc", .clk = &usbd_clk}, - { .con_id = "usbh_clk", .clk = &usbh_clk}, + CLKDEV_INIT("designware_udc", NULL, &usbd_clk), + CLKDEV_INIT(NULL, "usbh_clk", &usbh_clk), + /* clock derived from usbh clk */ + CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk), + CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk), /* clock derived from ahb clk */ - { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "i2c_designware.0", .clk = &i2c_clk}, - { .dev_id = "dma", .clk = &dma_clk}, - { .dev_id = "jpeg", .clk = &jpeg_clk}, - { .dev_id = "gmac", .clk = &gmac_clk}, - { .dev_id = "smi", .clk = &smi_clk}, - { .dev_id = "c3", .clk = &c3_clk}, + CLKDEV_INIT(NULL, "apb_clk", &apb_clk), + CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk), + CLKDEV_INIT("fc400000.dma", NULL, &dma_clk), + CLKDEV_INIT("jpeg", NULL, &jpeg_clk), + CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk), + CLKDEV_INIT("fc000000.flash", NULL, &smi_clk), + CLKDEV_INIT("c3", NULL, &c3_clk), /* clock derived from apb clk */ - { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, - { .dev_id = "gpio", .clk = &gpio_clk}, + CLKDEV_INIT("adc", NULL, &adc_clk), + CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk), + CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk), }; /* array of all spear 300 clock lookups */ #ifdef CONFIG_MACH_SPEAR300 static struct clk_lookup spear300_clk_lookups[] = { - { .dev_id = "clcd", .clk = &clcd_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .dev_id = "gpio1", .clk = &gpio1_clk}, - { .dev_id = "keyboard", .clk = &kbd_clk}, - { .dev_id = "sdhci", .clk = &sdhci_clk}, + CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk), + CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk), + CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk), + CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk), + CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk), }; + +void __init spear300_clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++) + clk_register(&spear300_clk_lookups[i]); + + clk_init(); +} #endif /* array of all spear 310 clock lookups */ #ifdef CONFIG_MACH_SPEAR310 static struct clk_lookup spear310_clk_lookups[] = { - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .con_id = "emi", .clk = &emi_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, - { .dev_id = "uart2", .clk = &uart2_clk}, - { .dev_id = "uart3", .clk = &uart3_clk}, - { .dev_id = "uart4", .clk = &uart4_clk}, - { .dev_id = "uart5", .clk = &uart5_clk}, + CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk), + CLKDEV_INIT(NULL, "emi", &emi_clk), + CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk), + CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk), + CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk), + CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk), + CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk), }; + +void __init spear310_clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++) + clk_register(&spear310_clk_lookups[i]); + + clk_init(); +} #endif /* array of all spear 320 clock lookups */ #ifdef CONFIG_MACH_SPEAR320 static struct clk_lookup spear320_clk_lookups[] = { - { .dev_id = "clcd", .clk = &clcd_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .dev_id = "i2c_designware.1", .clk = &i2c1_clk}, - { .con_id = "emi", .clk = &emi_clk}, - { .dev_id = "pwm", .clk = &pwm_clk}, - { .dev_id = "sdhci", .clk = &sdhci_clk}, - { .dev_id = "c_can_platform.0", .clk = &can0_clk}, - { .dev_id = "c_can_platform.1", .clk = &can1_clk}, - { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, - { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, - { .dev_id = "uart2", .clk = &uart2_clk}, -}; -#endif - -void __init spear3xx_clk_init(void) + CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk), + CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk), + CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk), + CLKDEV_INIT(NULL, "emi", &emi_clk), + CLKDEV_INIT("pwm", NULL, &pwm_clk), + CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk), + CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk), + CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk), + CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk), + CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk), + CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk), + CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk), +}; + +void __init spear320_clk_init(void) { - int i, cnt; - struct clk_lookup *lookups; - - if (machine_is_spear300()) { - cnt = ARRAY_SIZE(spear300_clk_lookups); - lookups = spear300_clk_lookups; - } else if (machine_is_spear310()) { - cnt = ARRAY_SIZE(spear310_clk_lookups); - lookups = spear310_clk_lookups; - } else { - cnt = ARRAY_SIZE(spear320_clk_lookups); - lookups = spear320_clk_lookups; - } + int i; for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) clk_register(&spear_clk_lookups[i]); - for (i = 0; i < cnt; i++) - clk_register(&lookups[i]); + for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++) + clk_register(&spear320_clk_lookups[i]); clk_init(); } +#endif diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 14276e5a98d2..e4f4d721cda2 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -14,6 +14,7 @@ #ifndef __MACH_GENERIC_H #define __MACH_GENERIC_H +#include <linux/amba/pl08x.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/amba/bus.h> @@ -21,26 +22,15 @@ #include <asm/mach/map.h> #include <plat/padmux.h> -/* spear3xx declarations */ -/* - * Each GPT has 2 timer channels - * Following GPT channels will be used as clock source and clockevent - */ -#define SPEAR_GPT0_BASE SPEAR3XX_ML1_TMR_BASE -#define SPEAR_GPT0_CHAN0_IRQ SPEAR3XX_IRQ_CPU_GPT1_1 -#define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2 - /* Add spear3xx family device structure declarations here */ -extern struct amba_device spear3xx_gpio_device; -extern struct amba_device spear3xx_uart_device; extern struct sys_timer spear3xx_timer; +extern struct pl022_ssp_controller pl022_plat_data; +extern struct pl08x_platform_data pl080_plat_data; /* Add spear3xx family function declarations here */ -void __init spear3xx_clk_init(void); -void __init spear_setup_timer(void); +void __init spear_setup_timer(resource_size_t base, int irq); void __init spear3xx_map_io(void); -void __init spear3xx_init_irq(void); -void __init spear3xx_init(void); +void __init spear3xx_dt_init_irq(void); void spear_restart(char, const char *); @@ -99,9 +89,6 @@ extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50; /* spear300 declarations */ #ifdef CONFIG_MACH_SPEAR300 -/* Add spear300 machine device structure declarations here */ -extern struct amba_device spear300_gpio1_device; - /* pad mux modes */ extern struct pmx_mode spear300_nand_mode; extern struct pmx_mode spear300_nor_mode; @@ -133,16 +120,13 @@ extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit; extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit; extern struct pmx_dev spear300_pmx_gpio1; -/* Add spear300 machine function declarations here */ -void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear300 machine declarations here */ +void __init spear300_clk_init(void); #endif /* CONFIG_MACH_SPEAR300 */ /* spear310 declarations */ #ifdef CONFIG_MACH_SPEAR310 -/* Add spear310 machine device structure declarations here */ - /* pad mux devices */ extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5; extern struct pmx_dev spear310_pmx_emi_cs_2_3; @@ -153,16 +137,13 @@ extern struct pmx_dev spear310_pmx_fsmc; extern struct pmx_dev spear310_pmx_rs485_0_1; extern struct pmx_dev spear310_pmx_tdm0; -/* Add spear310 machine function declarations here */ -void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear310 machine declarations here */ +void __init spear310_clk_init(void); #endif /* CONFIG_MACH_SPEAR310 */ /* spear320 declarations */ #ifdef CONFIG_MACH_SPEAR320 -/* Add spear320 machine device structure declarations here */ - /* pad mux modes */ extern struct pmx_mode spear320_auto_net_smii_mode; extern struct pmx_mode spear320_auto_net_mii_mode; @@ -193,9 +174,8 @@ extern struct pmx_dev spear320_pmx_smii0; extern struct pmx_dev spear320_pmx_smii1; extern struct pmx_dev spear320_pmx_i2c1; -/* Add spear320 machine function declarations here */ -void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear320 machine declarations here */ +void __init spear320_clk_init(void); #endif /* CONFIG_MACH_SPEAR320 */ diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h index 4660c0d8ec0d..40a8c178f10d 100644 --- a/arch/arm/mach-spear3xx/include/mach/hardware.h +++ b/arch/arm/mach-spear3xx/include/mach/hardware.h @@ -1,23 +1 @@ -/* - * arch/arm/mach-spear3xx/include/mach/hardware.h - * - * Hardware definitions for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -#include <plat/hardware.h> -#include <mach/spear.h> - -/* Vitual to physical translation of statically mapped space */ -#define IO_ADDRESS(x) (x | 0xF0000000) - -#endif /* __MACH_HARDWARE_H */ +/* empty */ diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index 6e265442808e..319620a1afb4 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -14,141 +14,15 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -/* SPEAr3xx IRQ definitions */ -#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0 0 +/* FIXME: probe all these from DT */ #define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM 1 #define SPEAR3XX_IRQ_CPU_GPT1_1 2 -#define SPEAR3XX_IRQ_CPU_GPT1_2 3 -#define SPEAR3XX_IRQ_BASIC_GPT1_1 4 -#define SPEAR3XX_IRQ_BASIC_GPT1_2 5 -#define SPEAR3XX_IRQ_BASIC_GPT2_1 6 -#define SPEAR3XX_IRQ_BASIC_GPT2_2 7 -#define SPEAR3XX_IRQ_BASIC_DMA 8 -#define SPEAR3XX_IRQ_BASIC_SMI 9 -#define SPEAR3XX_IRQ_BASIC_RTC 10 -#define SPEAR3XX_IRQ_BASIC_GPIO 11 -#define SPEAR3XX_IRQ_BASIC_WDT 12 -#define SPEAR3XX_IRQ_DDR_CONTROLLER 13 -#define SPEAR3XX_IRQ_SYS_ERROR 14 -#define SPEAR3XX_IRQ_WAKEUP_RCV 15 -#define SPEAR3XX_IRQ_JPEG 16 -#define SPEAR3XX_IRQ_IRDA 17 -#define SPEAR3XX_IRQ_ADC 18 -#define SPEAR3XX_IRQ_UART 19 -#define SPEAR3XX_IRQ_SSP 20 -#define SPEAR3XX_IRQ_I2C 21 -#define SPEAR3XX_IRQ_MAC_1 22 -#define SPEAR3XX_IRQ_MAC_2 23 -#define SPEAR3XX_IRQ_USB_DEV 24 -#define SPEAR3XX_IRQ_USB_H_OHCI_0 25 -#define SPEAR3XX_IRQ_USB_H_EHCI_0 26 -#define SPEAR3XX_IRQ_USB_H_EHCI_1 SPEAR3XX_IRQ_USB_H_EHCI_0 -#define SPEAR3XX_IRQ_USB_H_OHCI_1 27 #define SPEAR3XX_IRQ_GEN_RAS_1 28 #define SPEAR3XX_IRQ_GEN_RAS_2 29 #define SPEAR3XX_IRQ_GEN_RAS_3 30 -#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1 31 #define SPEAR3XX_IRQ_VIC_END 32 - #define SPEAR3XX_VIRQ_START SPEAR3XX_IRQ_VIC_END -/* SPEAr300 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0) -#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1) -#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2) -#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3) -#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4) -#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5) -#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6) -#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7) -#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8) - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3 - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM - -/* SPEAr310 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0) -#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1) -#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2) -#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3) -#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4) -#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5) -#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6) -#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7) - -/* IRQs sharing IRQ_GEN_RAS_2 */ -#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) -#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) -#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10) -#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11) -#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12) - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13) -#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14) - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15) -#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16) -#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17) - -/* SPEAr320 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0) -#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1) -#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2) - -/* IRQs sharing IRQ_GEN_RAS_2 */ -#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2 - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3) -#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4) -#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5) - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6) -#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7) -#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) -#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) -#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10) -#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11) -#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12) -#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13) -#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14) -#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15) -#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16) - -/* - * GPIO pins virtual irqs - * Use the lowest number for the GPIO virtual IRQs base on which subarchs - * we have compiled in - */ -#if defined(CONFIG_MACH_SPEAR310) -#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 18) -#elif defined(CONFIG_MACH_SPEAR320) -#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 17) -#else -#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 9) -#endif - -#define SPEAR300_GPIO1_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8) -#define SPEAR3XX_PLGPIO_COUNT 102 - -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -#define SPEAR3XX_PLGPIO_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8) -#define SPEAR3XX_GPIO_INT_END (SPEAR3XX_PLGPIO_INT_BASE + \ - SPEAR3XX_PLGPIO_COUNT) -#else -#define SPEAR3XX_GPIO_INT_END (SPEAR300_GPIO1_INT_BASE + 8) -#endif - -#define SPEAR3XX_VIRQ_END SPEAR3XX_GPIO_INT_END -#define NR_IRQS SPEAR3XX_VIRQ_END +#define NR_IRQS 160 #endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index 5bd8cd8d4852..e0ab72e61507 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -14,151 +14,7 @@ #ifndef __MACH_MISC_REGS_H #define __MACH_MISC_REGS_H -#include <mach/hardware.h> - #define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE) - -#define SOC_CFG_CTR (MISC_BASE + 0x000) -#define DIAG_CFG_CTR (MISC_BASE + 0x004) -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 11 -#define GPT2_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART_CLK_ENB 3 -#define SSP_CLK_ENB 5 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FIRDA_CLK_ENB 10 -#define GPT1_CLK_ENB 11 -#define GPT2_CLK_ENB 12 -#define ADC_CLK_ENB 15 -#define RTC_CLK_ENB 17 -#define GPIO_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH_CLK_ENB 25 -#define C3_CLK_ENB 31 - -#define SOC_CORE_ID (MISC_BASE + 0x030) -#define RAS_CLK_ENB (MISC_BASE + 0x034) -#define PERIP1_SOF_RST (MISC_BASE + 0x038) -/* PERIP1_SOF_RST register masks */ -#define JPEG_SOF_RST 8 - -#define SOC_USER_ID (MISC_BASE + 0x03C) -#define RAS_SOF_RST (MISC_BASE + 0x040) -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -#define ICM1_ARB_CFG (MISC_BASE + 0x07C) -#define ICM2_ARB_CFG (MISC_BASE + 0x080) -#define ICM3_ARB_CFG (MISC_BASE + 0x084) -#define ICM4_ARB_CFG (MISC_BASE + 0x088) -#define ICM5_ARB_CFG (MISC_BASE + 0x08C) -#define ICM6_ARB_CFG (MISC_BASE + 0x090) -#define ICM7_ARB_CFG (MISC_BASE + 0x094) -#define ICM8_ARB_CFG (MISC_BASE + 0x098) -#define ICM9_ARB_CFG (MISC_BASE + 0x09C) #define DMA_CHN_CFG (MISC_BASE + 0x0A0) -#define USB2_PHY_CFG (MISC_BASE + 0x0A4) -#define GMAC_CFG_CTR (MISC_BASE + 0x0A8) -#define EXPI_CFG_CTR (MISC_BASE + 0x0AC) -#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0) -#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4) -#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8) -#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC) -#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0) -#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4) -#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8) -#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC) -#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0) -#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4) -#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8) -#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC) -#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0) -#define BIST1_CFG_CTR (MISC_BASE + 0x0F4) -#define BIST2_CFG_CTR (MISC_BASE + 0x0F8) -#define BIST3_CFG_CTR (MISC_BASE + 0x0FC) -#define BIST4_CFG_CTR (MISC_BASE + 0x100) -#define BIST5_CFG_CTR (MISC_BASE + 0x104) -#define BIST1_STS_RES (MISC_BASE + 0x108) -#define BIST2_STS_RES (MISC_BASE + 0x10C) -#define BIST3_STS_RES (MISC_BASE + 0x110) -#define BIST4_STS_RES (MISC_BASE + 0x114) -#define BIST5_STS_RES (MISC_BASE + 0x118) -#define SYSERR_CFG_CTR (MISC_BASE + 0x11C) #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 63fd98356919..6d4dadc67633 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -15,60 +15,27 @@ #define __MACH_SPEAR3XX_H #include <asm/memory.h> -#include <mach/spear300.h> -#include <mach/spear310.h> -#include <mach/spear320.h> - -#define SPEAR3XX_ML_SDRAM_BASE UL(0x00000000) - -#define SPEAR3XX_ICM9_BASE UL(0xC0000000) /* ICM1 - Low speed connection */ #define SPEAR3XX_ICM1_2_BASE UL(0xD0000000) +#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000) #define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000) -#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE) -#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000) +#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE) #define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000) -#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000) -#define SPEAR3XX_ICM1_JPEG_BASE UL(0xD0800000) -#define SPEAR3XX_ICM1_IRDA_BASE UL(0xD1000000) -#define SPEAR3XX_ICM1_SRAM_BASE UL(0xD2800000) - -/* ICM2 - Application Subsystem */ -#define SPEAR3XX_ICM2_HWACCEL0_BASE UL(0xD8800000) -#define SPEAR3XX_ICM2_HWACCEL1_BASE UL(0xD9000000) - -/* ICM4 - High Speed Connection */ -#define SPEAR3XX_ICM4_BASE UL(0xE0000000) -#define SPEAR3XX_ICM4_MII_BASE UL(0xE0800000) -#define SPEAR3XX_ICM4_USBD_FIFO_BASE UL(0xE1000000) -#define SPEAR3XX_ICM4_USBD_CSR_BASE UL(0xE1100000) -#define SPEAR3XX_ICM4_USBD_PLDT_BASE UL(0xE1200000) -#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE UL(0xE1800000) -#define SPEAR3XX_ICM4_USB_OHCI0_BASE UL(0xE1900000) -#define SPEAR3XX_ICM4_USB_OHCI1_BASE UL(0xE2100000) -#define SPEAR3XX_ICM4_USB_ARB_BASE UL(0xE2800000) /* ML1 - Multi Layer CPU Subsystem */ #define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000) -#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000) -#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000) -#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE) +#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) +#define SPEAR3XX_CPU_TMR_BASE UL(0xF0000000) /* ICM3 - Basic Subsystem */ -#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000) #define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) +#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) #define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000) -#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000) -#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000) -#define SPEAR3XX_ICM3_WDT_BASE UL(0xFC880000) -#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000) -#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000) #define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) -#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE) +#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE) #define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000) -#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE) -#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000) +#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE) /* Debug uart for linux, will be used for debug and uncompress messages */ #define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h deleted file mode 100644 index 3b6ea0729040..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/spear300.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/spear300.h - * - * SPEAr300 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR300 - -#ifndef __MACH_SPEAR300_H -#define __MACH_SPEAR300_H - -/* Base address of various IPs */ -#define SPEAR300_TELECOM_BASE UL(0x50000000) - -/* Interrupt registers offsets and masks */ -#define SPEAR300_INT_ENB_MASK_REG 0x54 -#define SPEAR300_INT_STS_MASK_REG 0x58 -#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0) -#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1) -#define SPEAR300_I2S_IRQ_MASK (1 << 2) -#define SPEAR300_TDM_IRQ_MASK (1 << 3) -#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4) -#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5) -#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6) -#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7) -#define SPEAR300_GPIO1_IRQ_MASK (1 << 8) - -#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF - -#define SPEAR300_CLCD_BASE UL(0x60000000) -#define SPEAR300_SDHCI_BASE UL(0x70000000) -#define SPEAR300_NAND_0_BASE UL(0x80000000) -#define SPEAR300_NAND_1_BASE UL(0x84000000) -#define SPEAR300_NAND_2_BASE UL(0x88000000) -#define SPEAR300_NAND_3_BASE UL(0x8c000000) -#define SPEAR300_NOR_0_BASE UL(0x90000000) -#define SPEAR300_NOR_1_BASE UL(0x91000000) -#define SPEAR300_NOR_2_BASE UL(0x92000000) -#define SPEAR300_NOR_3_BASE UL(0x93000000) -#define SPEAR300_FSMC_BASE UL(0x94000000) -#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000) -#define SPEAR300_KEYBOARD_BASE UL(0xA0000000) -#define SPEAR300_GPIO_BASE UL(0xA9000000) - -#endif /* __MACH_SPEAR300_H */ - -#endif /* CONFIG_MACH_SPEAR300 */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h deleted file mode 100644 index 1567d0da725f..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/spear310.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/spear310.h - * - * SPEAr310 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR310 - -#ifndef __MACH_SPEAR310_H -#define __MACH_SPEAR310_H - -#define SPEAR310_NAND_BASE UL(0x40000000) -#define SPEAR310_FSMC_BASE UL(0x44000000) -#define SPEAR310_UART1_BASE UL(0xB2000000) -#define SPEAR310_UART2_BASE UL(0xB2080000) -#define SPEAR310_UART3_BASE UL(0xB2100000) -#define SPEAR310_UART4_BASE UL(0xB2180000) -#define SPEAR310_UART5_BASE UL(0xB2200000) -#define SPEAR310_HDLC_BASE UL(0xB2800000) -#define SPEAR310_RS485_0_BASE UL(0xB3000000) -#define SPEAR310_RS485_1_BASE UL(0xB3800000) -#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000) - -/* Interrupt registers offsets and masks */ -#define SPEAR310_INT_STS_MASK_REG 0x04 -#define SPEAR310_SMII0_IRQ_MASK (1 << 0) -#define SPEAR310_SMII1_IRQ_MASK (1 << 1) -#define SPEAR310_SMII2_IRQ_MASK (1 << 2) -#define SPEAR310_SMII3_IRQ_MASK (1 << 3) -#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4) -#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5) -#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6) -#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7) -#define SPEAR310_UART1_IRQ_MASK (1 << 8) -#define SPEAR310_UART2_IRQ_MASK (1 << 9) -#define SPEAR310_UART3_IRQ_MASK (1 << 10) -#define SPEAR310_UART4_IRQ_MASK (1 << 11) -#define SPEAR310_UART5_IRQ_MASK (1 << 12) -#define SPEAR310_EMI_IRQ_MASK (1 << 13) -#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14) -#define SPEAR310_RS485_0_IRQ_MASK (1 << 15) -#define SPEAR310_RS485_1_IRQ_MASK (1 << 16) - -#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF -#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00 -#define SPEAR310_SHIRQ_RAS3_MASK 0x02000 -#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000 - -#endif /* __MACH_SPEAR310_H */ - -#endif /* CONFIG_MACH_SPEAR310 */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h deleted file mode 100644 index 8cfa83fa1296..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/spear320.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/spear320.h - * - * SPEAr320 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR320 - -#ifndef __MACH_SPEAR320_H -#define __MACH_SPEAR320_H - -#define SPEAR320_EMI_CTRL_BASE UL(0x40000000) -#define SPEAR320_FSMC_BASE UL(0x4C000000) -#define SPEAR320_NAND_BASE UL(0x50000000) -#define SPEAR320_I2S_BASE UL(0x60000000) -#define SPEAR320_SDHCI_BASE UL(0x70000000) -#define SPEAR320_CLCD_BASE UL(0x90000000) -#define SPEAR320_PAR_PORT_BASE UL(0xA0000000) -#define SPEAR320_CAN0_BASE UL(0xA1000000) -#define SPEAR320_CAN1_BASE UL(0xA2000000) -#define SPEAR320_UART1_BASE UL(0xA3000000) -#define SPEAR320_UART2_BASE UL(0xA4000000) -#define SPEAR320_SSP0_BASE UL(0xA5000000) -#define SPEAR320_SSP1_BASE UL(0xA6000000) -#define SPEAR320_I2C_BASE UL(0xA7000000) -#define SPEAR320_PWM_BASE UL(0xA8000000) -#define SPEAR320_SMII0_BASE UL(0xAA000000) -#define SPEAR320_SMII1_BASE UL(0xAB000000) -#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) - -/* Interrupt registers offsets and masks */ -#define SPEAR320_INT_STS_MASK_REG 0x04 -#define SPEAR320_INT_CLR_MASK_REG 0x04 -#define SPEAR320_INT_ENB_MASK_REG 0x08 -#define SPEAR320_GPIO_IRQ_MASK (1 << 0) -#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1) -#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2) -#define SPEAR320_EMI_IRQ_MASK (1 << 7) -#define SPEAR320_CLCD_IRQ_MASK (1 << 8) -#define SPEAR320_SPP_IRQ_MASK (1 << 9) -#define SPEAR320_SDHCI_IRQ_MASK (1 << 10) -#define SPEAR320_CAN_U_IRQ_MASK (1 << 11) -#define SPEAR320_CAN_L_IRQ_MASK (1 << 12) -#define SPEAR320_UART1_IRQ_MASK (1 << 13) -#define SPEAR320_UART2_IRQ_MASK (1 << 14) -#define SPEAR320_SSP1_IRQ_MASK (1 << 15) -#define SPEAR320_SSP2_IRQ_MASK (1 << 16) -#define SPEAR320_SMII0_IRQ_MASK (1 << 17) -#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18) -#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19) -#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) -#define SPEAR320_I2C1_IRQ_MASK (1 << 21) - -#define SPEAR320_SHIRQ_RAS1_MASK 0x000380 -#define SPEAR320_SHIRQ_RAS3_MASK 0x000007 -#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 - -#endif /* __MACH_SPEAR320_H */ - -#endif /* CONFIG_MACH_SPEAR320 */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index f7db66812abb..febcdd8d4e92 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -3,21 +3,62 @@ * * SPEAr300 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/types.h> -#include <linux/amba/pl061.h> -#include <linux/ptrace.h> -#include <asm/irq.h> +#define pr_fmt(fmt) "SPEAr300: " fmt + +#include <linux/amba/pl08x.h> +#include <linux/of_platform.h> +#include <asm/hardware/vic.h> +#include <asm/mach/arch.h> #include <plat/shirq.h> #include <mach/generic.h> -#include <mach/hardware.h> +#include <mach/spear.h> + +/* Base address of various IPs */ +#define SPEAR300_TELECOM_BASE UL(0x50000000) + +/* Interrupt registers offsets and masks */ +#define SPEAR300_INT_ENB_MASK_REG 0x54 +#define SPEAR300_INT_STS_MASK_REG 0x58 +#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0) +#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1) +#define SPEAR300_I2S_IRQ_MASK (1 << 2) +#define SPEAR300_TDM_IRQ_MASK (1 << 3) +#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4) +#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5) +#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6) +#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7) +#define SPEAR300_GPIO1_IRQ_MASK (1 << 8) + +#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF + +#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000) + + +/* SPEAr300 Virtual irq definitions */ +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0) +#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1) +#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2) +#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3) +#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4) +#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5) +#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6) +#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7) +#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3 + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM /* pad multiplexing support */ /* muxing registers */ @@ -423,45 +464,275 @@ static struct spear_shirq shirq_ras1 = { }, }; -/* Add spear300 specific devices here */ -/* arm gpio1 device registration */ -static struct pl061_platform_data gpio1_plat_data = { - .gpio_base = 8, - .irq_base = SPEAR300_GPIO1_INT_BASE, +/* padmux devices to enable */ +static struct pmx_dev *spear300_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp_cs, + &spear3xx_pmx_ssp, + &spear3xx_pmx_mii, + &spear3xx_pmx_uart0, + + /* spear300 specific devices */ + &spear300_pmx_fsmc_2_chips, + &spear300_pmx_clcd, + &spear300_pmx_telecom_sdhci_4bit, + &spear300_pmx_gpio1, }; -AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE, - {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data); +/* DMAC platform data's slave info */ +struct pl08x_channel_data spear300_dma_info[] = { + { + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, +}; -/* spear300 routines */ -void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +/* Add SPEAr300 auxdata to pass platform data */ +static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), + {} +}; + +static void __init spear300_dt_init(void) { - int ret = 0; + int ret = -EINVAL; + + pl080_plat_data.slave_channels = spear300_dma_info; + pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info); - /* call spear3xx family common init function */ - spear3xx_init(); + of_platform_populate(NULL, of_default_bus_match_table, + spear300_auxdata_lookup, NULL); /* shared irq registration */ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K); if (shirq_ras1.regs.base) { ret = spear_shirq_register(&shirq_ras1); if (ret) - printk(KERN_ERR "Error registering Shared IRQ\n"); + pr_err("Error registering Shared IRQ\n"); } - /* pmx initialization */ - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; + if (of_machine_is_compatible("st,spear300-evb")) { + /* pmx initialization */ + pmx_driver.mode = &spear300_photo_frame_mode; + pmx_driver.devs = spear300_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs); + + pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); + if (pmx_driver.base) { + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); + /* Free Mapping, device selection already done */ + iounmap(pmx_driver.base); + } - pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); - if (pmx_driver.base) { - ret = pmx_register(&pmx_driver); if (ret) - printk(KERN_ERR "padmux: registration failed. err no" - ": %d\n", ret); - /* Free Mapping, device selection already done */ - iounmap(pmx_driver.base); + pr_err("Initialization Failed"); } } + +static const char * const spear300_dt_board_compat[] = { + "st,spear300", + "st,spear300-evb", + NULL, +}; + +static void __init spear300_map_io(void) +{ + spear3xx_map_io(); + spear300_clk_init(); +} + +DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree") + .map_io = spear300_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear300_dt_init, + .restart = spear_restart, + .dt_compat = spear300_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c deleted file mode 100644 index 3462ab9d6122..000000000000 --- a/arch/arm/mach-spear3xx/spear300_evb.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear300_evb.c - * - * SPEAr300 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/vic.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <mach/generic.h> -#include <mach/hardware.h> - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp_cs, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear300 specific devices */ - &spear300_pmx_fsmc_2_chips, - &spear300_pmx_clcd, - &spear300_pmx_telecom_sdhci_4bit, - &spear300_pmx_gpio1, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear300 specific devices */ - &spear300_gpio1_device, -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear300 specific devices */ -}; - -static void __init spear300_evb_init(void) -{ - unsigned int i; - - /* call spear300 machine init function */ - spear300_init(&spear300_photo_frame_mode, pmx_devs, - ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR300, "ST-SPEAR300-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear300_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index febaa6fcfb6a..b26e41566b50 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -3,19 +3,84 @@ * * SPEAr310 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/ptrace.h> -#include <asm/irq.h> +#define pr_fmt(fmt) "SPEAr310: " fmt + +#include <linux/amba/pl08x.h> +#include <linux/amba/serial.h> +#include <linux/of_platform.h> +#include <asm/hardware/vic.h> +#include <asm/mach/arch.h> #include <plat/shirq.h> #include <mach/generic.h> -#include <mach/hardware.h> +#include <mach/spear.h> + +#define SPEAR310_UART1_BASE UL(0xB2000000) +#define SPEAR310_UART2_BASE UL(0xB2080000) +#define SPEAR310_UART3_BASE UL(0xB2100000) +#define SPEAR310_UART4_BASE UL(0xB2180000) +#define SPEAR310_UART5_BASE UL(0xB2200000) +#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000) + +/* Interrupt registers offsets and masks */ +#define SPEAR310_INT_STS_MASK_REG 0x04 +#define SPEAR310_SMII0_IRQ_MASK (1 << 0) +#define SPEAR310_SMII1_IRQ_MASK (1 << 1) +#define SPEAR310_SMII2_IRQ_MASK (1 << 2) +#define SPEAR310_SMII3_IRQ_MASK (1 << 3) +#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4) +#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5) +#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6) +#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7) +#define SPEAR310_UART1_IRQ_MASK (1 << 8) +#define SPEAR310_UART2_IRQ_MASK (1 << 9) +#define SPEAR310_UART3_IRQ_MASK (1 << 10) +#define SPEAR310_UART4_IRQ_MASK (1 << 11) +#define SPEAR310_UART5_IRQ_MASK (1 << 12) +#define SPEAR310_EMI_IRQ_MASK (1 << 13) +#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14) +#define SPEAR310_RS485_0_IRQ_MASK (1 << 15) +#define SPEAR310_RS485_1_IRQ_MASK (1 << 16) + +#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF +#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00 +#define SPEAR310_SHIRQ_RAS3_MASK 0x02000 +#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000 + +/* SPEAr310 Virtual irq definitions */ +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0) +#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1) +#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2) +#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3) +#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4) +#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5) +#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6) +#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) +#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) +#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10) +#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11) +#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13) +#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15) +#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16) +#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17) + /* pad multiplexing support */ /* muxing registers */ @@ -255,17 +320,271 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* Add spear310 specific devices here */ +/* padmux devices to enable */ +static struct pmx_dev *spear310_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp, + &spear3xx_pmx_gpio_pin0, + &spear3xx_pmx_gpio_pin1, + &spear3xx_pmx_gpio_pin2, + &spear3xx_pmx_gpio_pin3, + &spear3xx_pmx_gpio_pin4, + &spear3xx_pmx_gpio_pin5, + &spear3xx_pmx_uart0, + + /* spear310 specific devices */ + &spear310_pmx_emi_cs_0_1_4_5, + &spear310_pmx_emi_cs_2_3, + &spear310_pmx_uart1, + &spear310_pmx_uart2, + &spear310_pmx_uart3_4_5, + &spear310_pmx_fsmc, + &spear310_pmx_rs485_0_1, + &spear310_pmx_tdm0, +}; -/* spear310 routines */ -void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +/* DMAC platform data's slave info */ +struct pl08x_channel_data spear310_dma_info[] = { + { + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart2_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart2_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart3_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart3_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart4_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart4_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart5_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart5_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, +}; + +/* uart devices plat data */ +static struct amba_pl011_data spear310_uart_data[] = { + { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart1_tx", + .dma_rx_param = "uart1_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart2_tx", + .dma_rx_param = "uart2_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart3_tx", + .dma_rx_param = "uart3_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart4_tx", + .dma_rx_param = "uart4_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart5_tx", + .dma_rx_param = "uart5_rx", + }, +}; + +/* Add SPEAr310 auxdata to pass platform data */ +static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL, + &spear310_uart_data[0]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL, + &spear310_uart_data[1]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL, + &spear310_uart_data[2]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL, + &spear310_uart_data[3]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL, + &spear310_uart_data[4]), + {} +}; + +static void __init spear310_dt_init(void) { void __iomem *base; int ret = 0; - /* call spear3xx family common init function */ - spear3xx_init(); + pl080_plat_data.slave_channels = spear310_dma_info; + pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info); + + of_platform_populate(NULL, of_default_bus_match_table, + spear310_auxdata_lookup, NULL); /* shared irq registration */ base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K); @@ -274,35 +593,59 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, shirq_ras1.regs.base = base; ret = spear_shirq_register(&shirq_ras1); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 1\n"); + pr_err("Error registering Shared IRQ 1\n"); /* shirq 2 */ shirq_ras2.regs.base = base; ret = spear_shirq_register(&shirq_ras2); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 2\n"); + pr_err("Error registering Shared IRQ 2\n"); /* shirq 3 */ shirq_ras3.regs.base = base; ret = spear_shirq_register(&shirq_ras3); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 3\n"); + pr_err("Error registering Shared IRQ 3\n"); /* shirq 4 */ shirq_intrcomm_ras.regs.base = base; ret = spear_shirq_register(&shirq_intrcomm_ras); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 4\n"); + pr_err("Error registering Shared IRQ 4\n"); + } + + if (of_machine_is_compatible("st,spear310-evb")) { + /* pmx initialization */ + pmx_driver.base = base; + pmx_driver.mode = NULL; + pmx_driver.devs = spear310_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs); + + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); } +} - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; +static const char * const spear310_dt_board_compat[] = { + "st,spear310", + "st,spear310-evb", + NULL, +}; - ret = pmx_register(&pmx_driver); - if (ret) - printk(KERN_ERR "padmux: registration failed. err no: %d\n", - ret); +static void __init spear310_map_io(void) +{ + spear3xx_map_io(); + spear310_clk_init(); } + +DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree") + .map_io = spear310_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear310_dt_init, + .restart = spear_restart, + .dt_compat = spear310_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c deleted file mode 100644 index f92c4993f65a..000000000000 --- a/arch/arm/mach-spear3xx/spear310_evb.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear310_evb.c - * - * SPEAr310 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/vic.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <mach/generic.h> -#include <mach/hardware.h> - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_gpio_pin0, - &spear3xx_pmx_gpio_pin1, - &spear3xx_pmx_gpio_pin2, - &spear3xx_pmx_gpio_pin3, - &spear3xx_pmx_gpio_pin4, - &spear3xx_pmx_gpio_pin5, - &spear3xx_pmx_uart0, - - /* spear310 specific devices */ - &spear310_pmx_emi_cs_0_1_4_5, - &spear310_pmx_emi_cs_2_3, - &spear310_pmx_uart1, - &spear310_pmx_uart2, - &spear310_pmx_uart3_4_5, - &spear310_pmx_fsmc, - &spear310_pmx_rs485_0_1, - &spear310_pmx_tdm0, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear310 specific devices */ -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear310 specific devices */ -}; - -static void __init spear310_evb_init(void) -{ - unsigned int i; - - /* call spear310 machine init function */ - spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR310, "ST-SPEAR310-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear310_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index deaaf199612c..2f5979b0c169 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -3,19 +3,85 @@ * * SPEAr320 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/ptrace.h> -#include <asm/irq.h> +#define pr_fmt(fmt) "SPEAr320: " fmt + +#include <linux/amba/pl022.h> +#include <linux/amba/pl08x.h> +#include <linux/amba/serial.h> +#include <linux/of_platform.h> +#include <asm/hardware/vic.h> +#include <asm/mach/arch.h> #include <plat/shirq.h> #include <mach/generic.h> -#include <mach/hardware.h> +#include <mach/spear.h> + +#define SPEAR320_UART1_BASE UL(0xA3000000) +#define SPEAR320_UART2_BASE UL(0xA4000000) +#define SPEAR320_SSP0_BASE UL(0xA5000000) +#define SPEAR320_SSP1_BASE UL(0xA6000000) +#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) + +/* Interrupt registers offsets and masks */ +#define SPEAR320_INT_STS_MASK_REG 0x04 +#define SPEAR320_INT_CLR_MASK_REG 0x04 +#define SPEAR320_INT_ENB_MASK_REG 0x08 +#define SPEAR320_GPIO_IRQ_MASK (1 << 0) +#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1) +#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2) +#define SPEAR320_EMI_IRQ_MASK (1 << 7) +#define SPEAR320_CLCD_IRQ_MASK (1 << 8) +#define SPEAR320_SPP_IRQ_MASK (1 << 9) +#define SPEAR320_SDHCI_IRQ_MASK (1 << 10) +#define SPEAR320_CAN_U_IRQ_MASK (1 << 11) +#define SPEAR320_CAN_L_IRQ_MASK (1 << 12) +#define SPEAR320_UART1_IRQ_MASK (1 << 13) +#define SPEAR320_UART2_IRQ_MASK (1 << 14) +#define SPEAR320_SSP1_IRQ_MASK (1 << 15) +#define SPEAR320_SSP2_IRQ_MASK (1 << 16) +#define SPEAR320_SMII0_IRQ_MASK (1 << 17) +#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18) +#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19) +#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) +#define SPEAR320_I2C1_IRQ_MASK (1 << 21) + +#define SPEAR320_SHIRQ_RAS1_MASK 0x000380 +#define SPEAR320_SHIRQ_RAS3_MASK 0x000007 +#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 + +/* SPEAr320 Virtual irq definitions */ +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0) +#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1) +#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2 + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3) +#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4) +#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6) +#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7) +#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) +#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) +#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10) +#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11) +#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12) +#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13) +#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14) +#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15) +#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16) /* pad multiplexing support */ /* muxing registers */ @@ -508,17 +574,271 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* Add spear320 specific devices here */ +/* padmux devices to enable */ +static struct pmx_dev *spear320_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp, + &spear3xx_pmx_mii, + &spear3xx_pmx_uart0, + + /* spear320 specific devices */ + &spear320_pmx_fsmc, + &spear320_pmx_sdhci, + &spear320_pmx_i2s, + &spear320_pmx_uart1, + &spear320_pmx_uart2, + &spear320_pmx_can, + &spear320_pmx_pwm0, + &spear320_pmx_pwm1, + &spear320_pmx_pwm2, + &spear320_pmx_mii1, +}; + +/* DMAC platform data's slave info */ +struct pl08x_channel_data spear320_dma_info[] = { + { + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c0_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c0_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp1_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp1_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp2_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp2_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c1_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c1_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c2_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c2_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "rs485_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "rs485_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, +}; + +static struct pl022_ssp_controller spear320_ssp_data[] = { + { + .bus_id = 1, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp1_tx", + .dma_rx_param = "ssp1_rx", + .num_chipselect = 2, + }, { + .bus_id = 2, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp2_tx", + .dma_rx_param = "ssp2_rx", + .num_chipselect = 2, + } +}; + +static struct amba_pl011_data spear320_uart_data[] = { + { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart1_tx", + .dma_rx_param = "uart1_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart2_tx", + .dma_rx_param = "uart2_rx", + }, +}; -/* spear320 routines */ -void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +/* Add SPEAr310 auxdata to pass platform data */ +static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), + OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL, + &spear320_ssp_data[0]), + OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL, + &spear320_ssp_data[1]), + OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL, + &spear320_uart_data[0]), + OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL, + &spear320_uart_data[1]), + {} +}; + +static void __init spear320_dt_init(void) { void __iomem *base; int ret = 0; - /* call spear3xx family common init function */ - spear3xx_init(); + pl080_plat_data.slave_channels = spear320_dma_info; + pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info); + + of_platform_populate(NULL, of_default_bus_match_table, + spear320_auxdata_lookup, NULL); /* shared irq registration */ base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K); @@ -527,29 +847,53 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, shirq_ras1.regs.base = base; ret = spear_shirq_register(&shirq_ras1); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 1\n"); + pr_err("Error registering Shared IRQ 1\n"); /* shirq 3 */ shirq_ras3.regs.base = base; ret = spear_shirq_register(&shirq_ras3); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 3\n"); + pr_err("Error registering Shared IRQ 3\n"); /* shirq 4 */ shirq_intrcomm_ras.regs.base = base; ret = spear_shirq_register(&shirq_intrcomm_ras); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 4\n"); + pr_err("Error registering Shared IRQ 4\n"); + } + + if (of_machine_is_compatible("st,spear320-evb")) { + /* pmx initialization */ + pmx_driver.base = base; + pmx_driver.mode = &spear320_auto_net_mii_mode; + pmx_driver.devs = spear320_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs); + + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); } +} - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; +static const char * const spear320_dt_board_compat[] = { + "st,spear320", + "st,spear320-evb", + NULL, +}; - ret = pmx_register(&pmx_driver); - if (ret) - printk(KERN_ERR "padmux: registration failed. err no: %d\n", - ret); +static void __init spear320_map_io(void) +{ + spear3xx_map_io(); + spear320_clk_init(); } + +DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree") + .map_io = spear320_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear320_dt_init, + .restart = spear_restart, + .dt_compat = spear320_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c deleted file mode 100644 index 105334ab7021..000000000000 --- a/arch/arm/mach-spear3xx/spear320_evb.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear320_evb.c - * - * SPEAr320 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/vic.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <mach/generic.h> -#include <mach/hardware.h> - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear320 specific devices */ - &spear320_pmx_fsmc, - &spear320_pmx_sdhci, - &spear320_pmx_i2s, - &spear320_pmx_uart1, - &spear320_pmx_uart2, - &spear320_pmx_can, - &spear320_pmx_pwm0, - &spear320_pmx_pwm1, - &spear320_pmx_pwm2, - &spear320_pmx_mii1, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear320 specific devices */ -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear320 specific devices */ -}; - -static void __init spear320_evb_init(void) -{ - unsigned int i; - - /* call spear320 machine init function */ - spear320_init(&spear320_auto_net_mii_mode, pmx_devs, - ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR320, "ST-SPEAR320-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear320_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index b1733c37f209..bbb11efa6056 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -3,83 +3,25 @@ * * SPEAr3XX machines common source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/types.h> -#include <linux/amba/pl061.h> -#include <linux/ptrace.h> +#define pr_fmt(fmt) "SPEAr3xx: " fmt + +#include <linux/amba/pl022.h> +#include <linux/amba/pl08x.h> +#include <linux/of_irq.h> #include <linux/io.h> +#include <asm/hardware/pl080.h> #include <asm/hardware/vic.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> +#include <plat/pl080.h> #include <mach/generic.h> -#include <mach/hardware.h> - -/* Add spear3xx machines common devices here */ -/* gpio device registration */ -static struct pl061_platform_data gpio_plat_data = { - .gpio_base = 0, - .irq_base = SPEAR3XX_GPIO_INT_BASE, -}; - -AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE, - {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data); - -/* uart device registration */ -AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE, - {SPEAR3XX_IRQ_UART}, NULL); - -/* Do spear3xx familiy common initialization part here */ -void __init spear3xx_init(void) -{ - /* nothing to do for now */ -} - -/* This will initialize vic */ -void __init spear3xx_init_irq(void) -{ - vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0); -} - -/* Following will create static virtual/physical mappings */ -struct map_desc spear3xx_io_desc[] __initdata = { - { - .virtual = VA_SPEAR3XX_ICM1_UART_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ML1_VIC_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, -}; - -/* This will create static memory mapping for selected devices */ -void __init spear3xx_map_io(void) -{ - iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); - - /* This will initialize clock framework */ - spear3xx_clk_init(); -} +#include <mach/spear.h> /* pad multiplexing support */ /* devices */ @@ -506,6 +448,68 @@ struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = { }; #endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */ +/* ssp device registration */ +struct pl022_ssp_controller pl022_plat_data = { + .bus_id = 0, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp0_tx", + .dma_rx_param = "ssp0_rx", + /* + * This is number of spi devices that can be connected to spi. There are + * two type of chipselects on which slave devices can work. One is chip + * select provided by spi masters other is controlled through external + * gpio's. We can't use chipselect provided from spi master (because as + * soon as FIFO becomes empty, CS is disabled and transfer ends). So + * this number now depends on number of gpios available for spi. each + * slave on each master requires a separate gpio pin. + */ + .num_chipselect = 2, +}; + +/* dmac device registration */ +struct pl08x_platform_data pl080_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \ + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_signal = pl080_get_signal, + .put_signal = pl080_put_signal, +}; + +/* + * Following will create 16MB static virtual/physical mappings + * PHYSICAL VIRTUAL + * 0xD0000000 0xFD000000 + * 0xFC000000 0xFC000000 + */ +struct map_desc spear3xx_io_desc[] __initdata = { + { + .virtual = VA_SPEAR3XX_ICM1_2_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM1_2_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, +}; + +/* This will create static memory mapping for selected devices */ +void __init spear3xx_map_io(void) +{ + iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); +} + static void __init spear3xx_timer_init(void) { char pclk_name[] = "pll3_48m_clk"; @@ -530,9 +534,19 @@ static void __init spear3xx_timer_init(void) clk_put(gpt_clk); clk_put(pclk); - spear_setup_timer(); + spear_setup_timer(SPEAR3XX_CPU_TMR_BASE, SPEAR3XX_IRQ_CPU_GPT1_1); } struct sys_timer spear3xx_timer = { .init = spear3xx_timer_init, }; + +static const struct of_device_id vic_of_match[] __initconst = { + { .compatible = "arm,pl190-vic", .data = vic_of_init, }, + { /* Sentinel */ } +}; + +void __init spear3xx_dt_init_irq(void) +{ + of_irq_init(vic_of_match); +} diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot index 4674a4c221db..af493da37ab6 100644 --- a/arch/arm/mach-spear6xx/Makefile.boot +++ b/arch/arm/mach-spear6xx/Makefile.boot @@ -1,3 +1,5 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_BOARD_SPEAR600_DT) += spear600-evb.dtb diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index a86499a8a15f..bef77d43db87 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -16,6 +16,112 @@ #include <linux/kernel.h> #include <plat/clock.h> #include <mach/misc_regs.h> +#include <mach/spear.h> + +#define PLL1_CTR (MISC_BASE + 0x008) +#define PLL1_FRQ (MISC_BASE + 0x00C) +#define PLL1_MOD (MISC_BASE + 0x010) +#define PLL2_CTR (MISC_BASE + 0x014) +/* PLL_CTR register masks */ +#define PLL_ENABLE 2 +#define PLL_MODE_SHIFT 4 +#define PLL_MODE_MASK 0x3 +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSB 2 +#define PLL_MODE_DITH_SSB 3 + +#define PLL2_FRQ (MISC_BASE + 0x018) +/* PLL FRQ register masks */ +#define PLL_DIV_N_SHIFT 0 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_P_MASK 0x7 +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DITH_FDBK_M_MASK 0xFFFF + +#define PLL2_MOD (MISC_BASE + 0x01C) +#define PLL_CLK_CFG (MISC_BASE + 0x020) +#define CORE_CLK_CFG (MISC_BASE + 0x024) +/* CORE CLK CFG register masks */ +#define PLL_HCLK_RATIO_SHIFT 10 +#define PLL_HCLK_RATIO_MASK 0x3 +#define HCLK_PCLK_RATIO_SHIFT 8 +#define HCLK_PCLK_RATIO_MASK 0x3 + +#define PERIP_CLK_CFG (MISC_BASE + 0x028) +/* PERIP_CLK_CFG register masks */ +#define CLCD_CLK_SHIFT 2 +#define CLCD_CLK_MASK 0x3 +#define UART_CLK_SHIFT 4 +#define UART_CLK_MASK 0x1 +#define FIRDA_CLK_SHIFT 5 +#define FIRDA_CLK_MASK 0x3 +#define GPT0_CLK_SHIFT 8 +#define GPT1_CLK_SHIFT 10 +#define GPT2_CLK_SHIFT 11 +#define GPT3_CLK_SHIFT 12 +#define GPT_CLK_MASK 0x1 +#define AUX_CLK_PLL3_VAL 0 +#define AUX_CLK_PLL1_VAL 1 + +#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) +/* PERIP1_CLK_ENB register masks */ +#define UART0_CLK_ENB 3 +#define UART1_CLK_ENB 4 +#define SSP0_CLK_ENB 5 +#define SSP1_CLK_ENB 6 +#define I2C_CLK_ENB 7 +#define JPEG_CLK_ENB 8 +#define FSMC_CLK_ENB 9 +#define FIRDA_CLK_ENB 10 +#define GPT2_CLK_ENB 11 +#define GPT3_CLK_ENB 12 +#define GPIO2_CLK_ENB 13 +#define SSP2_CLK_ENB 14 +#define ADC_CLK_ENB 15 +#define GPT1_CLK_ENB 11 +#define RTC_CLK_ENB 17 +#define GPIO1_CLK_ENB 18 +#define DMA_CLK_ENB 19 +#define SMI_CLK_ENB 21 +#define CLCD_CLK_ENB 22 +#define GMAC_CLK_ENB 23 +#define USBD_CLK_ENB 24 +#define USBH0_CLK_ENB 25 +#define USBH1_CLK_ENB 26 + +#define PRSC1_CLK_CFG (MISC_BASE + 0x044) +#define PRSC2_CLK_CFG (MISC_BASE + 0x048) +#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) +/* gpt synthesizer register masks */ +#define GPT_MSCALE_SHIFT 0 +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +#define AMEM_CLK_CFG (MISC_BASE + 0x050) +#define EXPI_CLK_CFG (MISC_BASE + 0x054) +#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) +#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) +#define UART_CLK_SYNT (MISC_BASE + 0x064) +#define GMAC_CLK_SYNT (MISC_BASE + 0x068) +#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) +#define RAS2_CLK_SYNT (MISC_BASE + 0x070) +#define RAS3_CLK_SYNT (MISC_BASE + 0x074) +#define RAS4_CLK_SYNT (MISC_BASE + 0x078) +/* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_SYNT_ENB 31 +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF /* root clks */ /* 32 KHz oscillator clock */ @@ -623,53 +729,53 @@ static struct clk dummy_apb_pclk; /* array of all spear 6xx clock lookups */ static struct clk_lookup spear_clk_lookups[] = { - { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, + CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk), /* root clks */ - { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, - { .con_id = "osc_30m_clk", .clk = &osc_30m_clk}, + CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk), + CLKDEV_INIT(NULL, "osc_30m_clk", &osc_30m_clk), /* clock derived from 32 KHz os clk */ - { .dev_id = "rtc-spear", .clk = &rtc_clk}, + CLKDEV_INIT("rtc-spear", NULL, &rtc_clk), /* clock derived from 30 MHz os clk */ - { .con_id = "pll1_clk", .clk = &pll1_clk}, - { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, - { .dev_id = "wdt", .clk = &wdt_clk}, + CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk), + CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk), + CLKDEV_INIT("wdt", NULL, &wdt_clk), /* clock derived from pll1 clk */ - { .con_id = "cpu_clk", .clk = &cpu_clk}, - { .con_id = "ahb_clk", .clk = &ahb_clk}, - { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, - { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, - { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk}, - { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, - { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, - { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk}, - { .dev_id = "d0000000.serial", .clk = &uart0_clk}, - { .dev_id = "d0080000.serial", .clk = &uart1_clk}, - { .dev_id = "firda", .clk = &firda_clk}, - { .dev_id = "clcd", .clk = &clcd_clk}, - { .dev_id = "gpt0", .clk = &gpt0_clk}, - { .dev_id = "gpt1", .clk = &gpt1_clk}, - { .dev_id = "gpt2", .clk = &gpt2_clk}, - { .dev_id = "gpt3", .clk = &gpt3_clk}, + CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk), + CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk), + CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk), + CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk), + CLKDEV_INIT(NULL, "clcd_synth_clk", &clcd_synth_clk), + CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk), + CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk), + CLKDEV_INIT(NULL, "gpt3_synth_clk", &gpt3_synth_clk), + CLKDEV_INIT("d0000000.serial", NULL, &uart0_clk), + CLKDEV_INIT("d0080000.serial", NULL, &uart1_clk), + CLKDEV_INIT("firda", NULL, &firda_clk), + CLKDEV_INIT("clcd", NULL, &clcd_clk), + CLKDEV_INIT("gpt0", NULL, &gpt0_clk), + CLKDEV_INIT("gpt1", NULL, &gpt1_clk), + CLKDEV_INIT("gpt2", NULL, &gpt2_clk), + CLKDEV_INIT("gpt3", NULL, &gpt3_clk), /* clock derived from pll3 clk */ - { .dev_id = "designware_udc", .clk = &usbd_clk}, - { .con_id = "usbh.0_clk", .clk = &usbh0_clk}, - { .con_id = "usbh.1_clk", .clk = &usbh1_clk}, + CLKDEV_INIT("designware_udc", NULL, &usbd_clk), + CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk), + CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk), /* clock derived from ahb clk */ - { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "d0200000.i2c", .clk = &i2c_clk}, - { .dev_id = "dma", .clk = &dma_clk}, - { .dev_id = "jpeg", .clk = &jpeg_clk}, - { .dev_id = "gmac", .clk = &gmac_clk}, - { .dev_id = "smi", .clk = &smi_clk}, - { .dev_id = "fsmc-nand", .clk = &fsmc_clk}, + CLKDEV_INIT(NULL, "apb_clk", &apb_clk), + CLKDEV_INIT("d0200000.i2c", NULL, &i2c_clk), + CLKDEV_INIT("fc400000.dma", NULL, &dma_clk), + CLKDEV_INIT("jpeg", NULL, &jpeg_clk), + CLKDEV_INIT("gmac", NULL, &gmac_clk), + CLKDEV_INIT("fc000000.flash", NULL, &smi_clk), + CLKDEV_INIT("d1800000.flash", NULL, &fsmc_clk), /* clock derived from apb clk */ - { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, - { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, - { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "f0100000.gpio", .clk = &gpio0_clk}, - { .dev_id = "fc980000.gpio", .clk = &gpio1_clk}, - { .dev_id = "d8100000.gpio", .clk = &gpio2_clk}, + CLKDEV_INIT("adc", NULL, &adc_clk), + CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk), + CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk), + CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk), + CLKDEV_INIT("f0100000.gpio", NULL, &gpio0_clk), + CLKDEV_INIT("fc980000.gpio", NULL, &gpio1_clk), + CLKDEV_INIT("d8100000.gpio", NULL, &gpio2_clk), }; void __init spear6xx_clk_init(void) diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h index 116b99301cf5..7167fd331d86 100644 --- a/arch/arm/mach-spear6xx/include/mach/generic.h +++ b/arch/arm/mach-spear6xx/include/mach/generic.h @@ -15,34 +15,9 @@ #define __MACH_GENERIC_H #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -/* - * Each GPT has 2 timer channels - * Following GPT channels will be used as clock source and clockevent - */ -#define SPEAR_GPT0_BASE SPEAR6XX_CPU_TMR_BASE -#define SPEAR_GPT0_CHAN0_IRQ IRQ_CPU_GPT1_1 -#define SPEAR_GPT0_CHAN1_IRQ IRQ_CPU_GPT1_2 - -/* Add spear6xx family device structure declarations here */ -extern struct amba_device gpio_device[]; -extern struct amba_device uart_device[]; -extern struct sys_timer spear6xx_timer; - -/* Add spear6xx family function declarations here */ -void __init spear_setup_timer(void); -void __init spear6xx_map_io(void); -void __init spear6xx_init_irq(void); -void __init spear6xx_init(void); -void __init spear600_init(void); -void __init spear6xx_clk_init(void); +void __init spear_setup_timer(resource_size_t base, int irq); void spear_restart(char, const char *); - -/* Add spear600 machine device structure declarations here */ +void __init spear6xx_clk_init(void); #endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h index 0b3f96ae2848..40a8c178f10d 100644 --- a/arch/arm/mach-spear6xx/include/mach/hardware.h +++ b/arch/arm/mach-spear6xx/include/mach/hardware.h @@ -1,23 +1 @@ -/* - * arch/arm/mach-spear6xx/include/mach/hardware.h - * - * Hardware definitions for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -#include <plat/hardware.h> -#include <mach/spear.h> - -/* Vitual to physical translation of statically mapped space */ -#define IO_ADDRESS(x) (x | 0xF0000000) - -#endif /* __MACH_HARDWARE_H */ +/* empty */ diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h index 8f214b03d75d..2b735389e74b 100644 --- a/arch/arm/mach-spear6xx/include/mach/irqs.h +++ b/arch/arm/mach-spear6xx/include/mach/irqs.h @@ -16,82 +16,13 @@ /* IRQ definitions */ /* VIC 1 */ -#define IRQ_INTRCOMM_SW_IRQ 0 -#define IRQ_INTRCOMM_CPU_1 1 -#define IRQ_INTRCOMM_CPU_2 2 -#define IRQ_INTRCOMM_RAS2A11_1 3 -#define IRQ_INTRCOMM_RAS2A11_2 4 -#define IRQ_INTRCOMM_RAS2A12_1 5 -#define IRQ_INTRCOMM_RAS2A12_2 6 -#define IRQ_GEN_RAS_0 7 -#define IRQ_GEN_RAS_1 8 -#define IRQ_GEN_RAS_2 9 -#define IRQ_GEN_RAS_3 10 -#define IRQ_GEN_RAS_4 11 -#define IRQ_GEN_RAS_5 12 -#define IRQ_GEN_RAS_6 13 -#define IRQ_GEN_RAS_7 14 -#define IRQ_GEN_RAS_8 15 +/* FIXME: probe this from DT */ #define IRQ_CPU_GPT1_1 16 -#define IRQ_CPU_GPT1_2 17 -#define IRQ_LOCAL_GPIO 18 -#define IRQ_PLL_UNLOCK 19 -#define IRQ_JPEG 20 -#define IRQ_FSMC 21 -#define IRQ_IRDA 22 -#define IRQ_RESERVED 23 -#define IRQ_UART_0 24 -#define IRQ_UART_1 25 -#define IRQ_SSP_1 26 -#define IRQ_SSP_2 27 -#define IRQ_I2C 28 -#define IRQ_GEN_RAS_9 29 -#define IRQ_GEN_RAS_10 30 -#define IRQ_GEN_RAS_11 31 - -/* VIC 2 */ -#define IRQ_APPL_GPT1_1 32 -#define IRQ_APPL_GPT1_2 33 -#define IRQ_APPL_GPT2_1 34 -#define IRQ_APPL_GPT2_2 35 -#define IRQ_APPL_GPIO 36 -#define IRQ_APPL_SSP 37 -#define IRQ_APPL_ADC 38 -#define IRQ_APPL_RESERVED 39 -#define IRQ_AHB_EXP_MASTER 40 -#define IRQ_DDR_CONTROLLER 41 -#define IRQ_BASIC_DMA 42 -#define IRQ_BASIC_RESERVED1 43 -#define IRQ_BASIC_SMI 44 -#define IRQ_BASIC_CLCD 45 -#define IRQ_EXP_AHB_1 46 -#define IRQ_EXP_AHB_2 47 -#define IRQ_BASIC_GPT1_1 48 -#define IRQ_BASIC_GPT1_2 49 -#define IRQ_BASIC_RTC 50 -#define IRQ_BASIC_GPIO 51 -#define IRQ_BASIC_WDT 52 -#define IRQ_BASIC_RESERVED 53 -#define IRQ_AHB_EXP_SLAVE 54 -#define IRQ_GMAC_1 55 -#define IRQ_GMAC_2 56 -#define IRQ_USB_DEV 57 -#define IRQ_USB_H_OHCI_0 58 -#define IRQ_USB_H_EHCI_0 59 -#define IRQ_USB_H_OHCI_1 60 -#define IRQ_USB_H_EHCI_1 61 -#define IRQ_EXP_AHB_3 62 -#define IRQ_EXP_AHB_4 63 #define IRQ_VIC_END 64 /* GPIO pins virtual irqs */ -#define SPEAR_GPIO_INT_BASE IRQ_VIC_END -#define SPEAR_GPIO0_INT_BASE SPEAR_GPIO_INT_BASE -#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO0_INT_BASE + 8) -#define SPEAR_GPIO2_INT_BASE (SPEAR_GPIO1_INT_BASE + 8) -#define SPEAR_GPIO_INT_END (SPEAR_GPIO2_INT_BASE + 8) -#define VIRTUAL_IRQS (SPEAR_GPIO_INT_END - IRQ_VIC_END) -#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) +#define VIRTUAL_IRQS 24 +#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) #endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index 68c20a007b0d..2b9aaa6cdd11 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -14,161 +14,7 @@ #ifndef __MACH_MISC_REGS_H #define __MACH_MISC_REGS_H -#include <mach/hardware.h> - #define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE) - -#define SOC_CFG_CTR (MISC_BASE + 0x000) -#define DIAG_CFG_CTR (MISC_BASE + 0x004) -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define CLCD_CLK_SHIFT 2 -#define CLCD_CLK_MASK 0x3 -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 10 -#define GPT2_CLK_SHIFT 11 -#define GPT3_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART0_CLK_ENB 3 -#define UART1_CLK_ENB 4 -#define SSP0_CLK_ENB 5 -#define SSP1_CLK_ENB 6 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FSMC_CLK_ENB 9 -#define FIRDA_CLK_ENB 10 -#define GPT2_CLK_ENB 11 -#define GPT3_CLK_ENB 12 -#define GPIO2_CLK_ENB 13 -#define SSP2_CLK_ENB 14 -#define ADC_CLK_ENB 15 -#define GPT1_CLK_ENB 11 -#define RTC_CLK_ENB 17 -#define GPIO1_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define CLCD_CLK_ENB 22 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH0_CLK_ENB 25 -#define USBH1_CLK_ENB 26 - -#define SOC_CORE_ID (MISC_BASE + 0x030) -#define RAS_CLK_ENB (MISC_BASE + 0x034) -#define PERIP1_SOF_RST (MISC_BASE + 0x038) -/* PERIP1_SOF_RST register masks */ -#define JPEG_SOF_RST 8 - -#define SOC_USER_ID (MISC_BASE + 0x03C) -#define RAS_SOF_RST (MISC_BASE + 0x040) -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -#define ICM1_ARB_CFG (MISC_BASE + 0x07C) -#define ICM2_ARB_CFG (MISC_BASE + 0x080) -#define ICM3_ARB_CFG (MISC_BASE + 0x084) -#define ICM4_ARB_CFG (MISC_BASE + 0x088) -#define ICM5_ARB_CFG (MISC_BASE + 0x08C) -#define ICM6_ARB_CFG (MISC_BASE + 0x090) -#define ICM7_ARB_CFG (MISC_BASE + 0x094) -#define ICM8_ARB_CFG (MISC_BASE + 0x098) -#define ICM9_ARB_CFG (MISC_BASE + 0x09C) #define DMA_CHN_CFG (MISC_BASE + 0x0A0) -#define USB2_PHY_CFG (MISC_BASE + 0x0A4) -#define GMAC_CFG_CTR (MISC_BASE + 0x0A8) -#define EXPI_CFG_CTR (MISC_BASE + 0x0AC) -#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0) -#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4) -#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8) -#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC) -#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0) -#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4) -#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8) -#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC) -#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0) -#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4) -#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8) -#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC) -#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0) -#define BIST1_CFG_CTR (MISC_BASE + 0x0F4) -#define BIST2_CFG_CTR (MISC_BASE + 0x0F8) -#define BIST3_CFG_CTR (MISC_BASE + 0x0FC) -#define BIST4_CFG_CTR (MISC_BASE + 0x100) -#define BIST5_CFG_CTR (MISC_BASE + 0x104) -#define BIST1_STS_RES (MISC_BASE + 0x108) -#define BIST2_STS_RES (MISC_BASE + 0x10C) -#define BIST3_STS_RES (MISC_BASE + 0x110) -#define BIST4_STS_RES (MISC_BASE + 0x114) -#define BIST5_STS_RES (MISC_BASE + 0x118) -#define SYSERR_CFG_CTR (MISC_BASE + 0x11C) #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h index 7fd621532def..d278ed047a53 100644 --- a/arch/arm/mach-spear6xx/include/mach/spear.h +++ b/arch/arm/mach-spear6xx/include/mach/spear.h @@ -15,69 +15,26 @@ #define __MACH_SPEAR6XX_H #include <asm/memory.h> -#include <mach/spear600.h> -#define SPEAR6XX_ML_SDRAM_BASE UL(0x00000000) /* ICM1 - Low speed connection */ #define SPEAR6XX_ICM1_BASE UL(0xD0000000) - +#define VA_SPEAR6XX_ICM1_BASE UL(0xFD000000) #define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000) -#define VA_SPEAR6XX_ICM1_UART0_BASE IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE) - -#define SPEAR6XX_ICM1_UART1_BASE UL(0xD0080000) -#define SPEAR6XX_ICM1_SSP0_BASE UL(0xD0100000) -#define SPEAR6XX_ICM1_SSP1_BASE UL(0xD0180000) -#define SPEAR6XX_ICM1_I2C_BASE UL(0xD0200000) -#define SPEAR6XX_ICM1_JPEG_BASE UL(0xD0800000) -#define SPEAR6XX_ICM1_IRDA_BASE UL(0xD1000000) -#define SPEAR6XX_ICM1_FSMC_BASE UL(0xD1800000) -#define SPEAR6XX_ICM1_NAND_BASE UL(0xD2000000) -#define SPEAR6XX_ICM1_SRAM_BASE UL(0xD2800000) - -/* ICM2 - Application Subsystem */ -#define SPEAR6XX_ICM2_BASE UL(0xD8000000) -#define SPEAR6XX_ICM2_TMR0_BASE UL(0xD8000000) -#define SPEAR6XX_ICM2_TMR1_BASE UL(0xD8080000) -#define SPEAR6XX_ICM2_GPIO_BASE UL(0xD8100000) -#define SPEAR6XX_ICM2_SSP2_BASE UL(0xD8180000) -#define SPEAR6XX_ICM2_ADC_BASE UL(0xD8200000) +#define VA_SPEAR6XX_ICM1_UART0_BASE (VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE) /* ML-1, 2 - Multi Layer CPU Subsystem */ #define SPEAR6XX_ML_CPU_BASE UL(0xF0000000) +#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) #define SPEAR6XX_CPU_TMR_BASE UL(0xF0000000) -#define SPEAR6XX_CPU_GPIO_BASE UL(0xF0100000) -#define SPEAR6XX_CPU_VIC_SEC_BASE UL(0xF1000000) -#define VA_SPEAR6XX_CPU_VIC_SEC_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE) -#define SPEAR6XX_CPU_VIC_PRI_BASE UL(0xF1100000) -#define VA_SPEAR6XX_CPU_VIC_PRI_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE) /* ICM3 - Basic Subsystem */ -#define SPEAR6XX_ICM3_BASE UL(0xF8000000) -#define SPEAR6XX_ICM3_SMEM_BASE UL(0xF8000000) #define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) -#define SPEAR6XX_ICM3_CLCD_BASE UL(0xFC200000) +#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) #define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000) -#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000) -#define SPEAR6XX_ICM3_TMR_BASE UL(0xFC800000) -#define SPEAR6XX_ICM3_WDT_BASE UL(0xFC880000) -#define SPEAR6XX_ICM3_RTC_BASE UL(0xFC900000) -#define SPEAR6XX_ICM3_GPIO_BASE UL(0xFC980000) #define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) -#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE) +#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE) #define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000) -#define VA_SPEAR6XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE) - -/* ICM4 - High Speed Connection */ -#define SPEAR6XX_ICM4_BASE UL(0xE0000000) -#define SPEAR6XX_ICM4_GMAC_BASE UL(0xE0800000) -#define SPEAR6XX_ICM4_USBD_FIFO_BASE UL(0xE1000000) -#define SPEAR6XX_ICM4_USBD_CSR_BASE UL(0xE1100000) -#define SPEAR6XX_ICM4_USBD_PLDT_BASE UL(0xE1200000) -#define SPEAR6XX_ICM4_USB_EHCI0_BASE UL(0xE1800000) -#define SPEAR6XX_ICM4_USB_OHCI0_BASE UL(0xE1900000) -#define SPEAR6XX_ICM4_USB_EHCI1_BASE UL(0xE2000000) -#define SPEAR6XX_ICM4_USB_OHCI1_BASE UL(0xE2100000) -#define SPEAR6XX_ICM4_USB_ARB_BASE UL(0xE2800000) +#define VA_SPEAR6XX_ICM3_MISC_REG_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE) /* Debug uart for linux, will be used for debug and uncompress messages */ #define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE diff --git a/arch/arm/mach-spear6xx/include/mach/spear600.h b/arch/arm/mach-spear6xx/include/mach/spear600.h deleted file mode 100644 index c068cc50b0fb..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/spear600.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-spear66xx/include/mach/spear600.h - * - * SPEAr600 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR600 - -#ifndef __MACH_SPEAR600_H -#define __MACH_SPEAR600_H - -#endif /* __MACH_SPEAR600_H */ - -#endif /* CONFIG_MACH_SPEAR600 */ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 2ed8b14c82c8..de194dbb8371 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -13,41 +13,404 @@ * warranty of any kind, whether express or implied. */ +#include <linux/amba/pl08x.h> +#include <linux/clk.h> +#include <linux/err.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <asm/hardware/pl080.h> #include <asm/hardware/vic.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <plat/pl080.h> #include <mach/generic.h> -#include <mach/hardware.h> +#include <mach/spear.h> -/* Following will create static virtual/physical mappings */ -static struct map_desc spear6xx_io_desc[] __initdata = { +/* dmac device registration */ +static struct pl08x_channel_data spear600_dma_info[] = { { - .virtual = VA_SPEAR6XX_ICM1_UART0_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE), - .length = SZ_4K, - .type = MT_DEVICE + .bus_id = "ssp1_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, }, { - .virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE), - .length = SZ_4K, - .type = MT_DEVICE + .bus_id = "ssp1_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, }, { - .virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE), - .length = SZ_4K, - .type = MT_DEVICE + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp2_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp2_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, }, { - .virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE), - .length = SZ_4K, + .bus_id = "ras7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ext0_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext0_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext1_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext1_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext2_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext2_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext3_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext3_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext4_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext4_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, +}; + +struct pl08x_platform_data pl080_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \ + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_signal = pl080_get_signal, + .put_signal = pl080_put_signal, + .slave_channels = spear600_dma_info, + .num_slave_channels = ARRAY_SIZE(spear600_dma_info), +}; + +/* + * Following will create 16MB static virtual/physical mappings + * PHYSICAL VIRTUAL + * 0xF0000000 0xF0000000 + * 0xF1000000 0xF1000000 + * 0xD0000000 0xFD000000 + * 0xFC000000 0xFC000000 + */ +struct map_desc spear6xx_io_desc[] __initdata = { + { + .virtual = VA_SPEAR6XX_ML_CPU_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ML_CPU_BASE), + .length = 2 * SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR6XX_ICM1_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM1_BASE), + .length = SZ_16M, .type = MT_DEVICE }, { - .virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE), - .length = SZ_4K, + .virtual = VA_SPEAR6XX_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE), + .length = SZ_16M, .type = MT_DEVICE }, }; @@ -85,16 +448,24 @@ static void __init spear6xx_timer_init(void) clk_put(gpt_clk); clk_put(pclk); - spear_setup_timer(); + spear_setup_timer(SPEAR6XX_CPU_TMR_BASE, IRQ_CPU_GPT1_1); } struct sys_timer spear6xx_timer = { .init = spear6xx_timer_init, }; +/* Add auxdata to pass platform data */ +struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), + {} +}; + static void __init spear600_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, + spear6xx_auxdata_lookup, NULL); } static const char *spear600_dt_board_compat[] = { diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 77d03c1fbd04..f8150155a442 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -605,7 +605,6 @@ static void __init mop500_uart_init(struct device *parent) static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_led_dev, &snowball_key_dev, - &snowball_sbnet_dev, &ab8500_device, }; @@ -646,7 +645,6 @@ static void __init mop500_init_machine(void) static void __init snowball_init_machine(void) { struct device *parent = NULL; - int i2c0_devs; int i; parent = u8500_init_devices(); @@ -664,11 +662,6 @@ static void __init snowball_init_machine(void) mop500_spi_init(parent); mop500_uart_init(parent); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - /* This board has full regulator constraints */ regulator_has_full_constraints(); } @@ -753,9 +746,10 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { {}, }; -static const struct of_device_id u8500_soc_node[] = { +static const struct of_device_id u8500_local_bus_nodes[] = { /* only create devices below soc node */ { .compatible = "stericsson,db8500", }, + { .compatible = "simple-bus"}, { }, }; @@ -766,7 +760,6 @@ static void __init u8500_init_machine(void) int i; parent = u8500_init_devices(); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -774,7 +767,7 @@ static void __init u8500_init_machine(void) snowball_platform_devs[i]->dev.parent = parent; /* automatically probe child nodes of db8500 device */ - of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent); + of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); if (of_machine_is_compatible("st-ericsson,mop500")) { mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; @@ -784,6 +777,12 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { snowball_pins_init(); platform_add_devices(snowball_platform_devs, @@ -797,19 +796,21 @@ static void __init u8500_init_machine(void) * instead. */ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; hrefv60_pins_init(); platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); } mop500_i2c_init(parent); - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - /* This board has full regulator constraints */ regulator_has_full_constraints(); } diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 9bd8163896cf..f44a12ccddf3 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -121,6 +121,12 @@ static struct platform_device *platform_devs[] __initdata = { &db8500_prcmu_device, }; +static struct platform_device *of_platform_devs[] __initdata = { + &u8500_dma40_device, + &db8500_pmu_device, + &db8500_prcmu_device, +}; + static resource_size_t __initdata db8500_gpio_base[] = { U8500_GPIOBANK0_BASE, U8500_GPIOBANK1_BASE, @@ -199,10 +205,16 @@ struct device * __init u8500_init_devices(void) platform_device_register_data(parent, "cpufreq-u8500", -1, NULL, 0); - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) - platform_devs[i]->dev.parent = parent; + for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++) + of_platform_devs[i]->dev.parent = parent; - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + /* + * Devices to be DT:ed: + * u8500_dma40_device = todo + * db8500_pmu_device = todo + * db8500_prcmu_device = todo + */ + platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs)); return parent; } diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 52e55337aa9b..bd8e110cbcc2 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -8,6 +8,7 @@ #include <linux/errno.h> #include <linux/clksrc-dbx500-prcmu.h> #include <linux/of.h> +#include <linux/of_address.h> #include <asm/smp_twd.h> @@ -41,10 +42,17 @@ static void __init ux500_twd_init(void) #define ux500_twd_init() do { } while(0) #endif +const static struct of_device_id prcmu_timer_of_match[] __initconst = { + { .compatible = "stericsson,db8500-prcmu-timer-4", }, + { }, +}; + static void __init ux500_timer_init(void) { void __iomem *mtu_timer_base; void __iomem *prcmu_timer_base; + void __iomem *tmp_base; + struct device_node *np; if (cpu_is_u8500()) { mtu_timer_base = __io_address(U8500_MTU0_BASE); @@ -53,6 +61,22 @@ static void __init ux500_timer_init(void) ux500_unknown_soc(); } + /* TODO: Once MTU has been DT:ed place code above into else. */ + if (of_have_populated_dt()) { + np = of_find_matching_node(NULL, prcmu_timer_of_match); + if (!np) + goto dt_fail; + + tmp_base = of_iomap(np, 0); + if (!tmp_base) + goto dt_fail; + + prcmu_timer_base = tmp_base; + } + +dt_fail: + /* Doing it the old fashioned way. */ + /* * Here we register the timerblocks active in the system. * Localtimers (twd) is started when both cpu is up and running. diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 1bb3dbce8810..6c066fcb2979 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -9,9 +9,10 @@ choice default ARCH_SPEAR3XX config ARCH_SPEAR3XX - bool "SPEAr3XX" + bool "ST SPEAr3xx with Device Tree" select ARM_VIC select CPU_ARM926T + select USE_OF help Supports for ARM's SPEAR3XX family diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index e0f2e5b9530c..4af6258d0fee 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -3,6 +3,6 @@ # # Common support -obj-y := clock.o restart.o time.o +obj-y := clock.o restart.o time.o pl080.o obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index 02b160a1ec9b..ab3de721c5db 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -12,7 +12,7 @@ */ #include <linux/amba/serial.h> -#include <mach/hardware.h> +#include <mach/spear.h> .macro addruart, rp, rv, tmp mov \rp, #SPEAR_DBG_UART_BASE @ Physical base diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h deleted file mode 100644 index 70187d763e26..000000000000 --- a/arch/arm/plat-spear/include/plat/hardware.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/hardware.h - * - * Hardware definitions for SPEAr - * - * Copyright (C) 2010 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_HARDWARE_H -#define __PLAT_HARDWARE_H - -#endif /* __PLAT_HARDWARE_H */ diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h new file mode 100644 index 000000000000..e14a3e4932f9 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -0,0 +1,21 @@ +/* + * arch/arm/plat-spear/include/plat/pl080.h + * + * DMAC pl080 definitions for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_PL080_H +#define __PLAT_PL080_H + +struct pl08x_dma_chan; +int pl080_get_signal(struct pl08x_dma_chan *ch); +void pl080_put_signal(struct pl08x_dma_chan *ch); + +#endif /* __PLAT_PL080_H */ diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 1bf84527aee4..6dd455bafdfd 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -13,7 +13,7 @@ #include <linux/io.h> #include <linux/amba/serial.h> -#include <mach/hardware.h> +#include <mach/spear.h> #ifndef __PLAT_UNCOMPRESS_H #define __PLAT_UNCOMPRESS_H diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c new file mode 100644 index 000000000000..a56a067717c1 --- /dev/null +++ b/arch/arm/plat-spear/pl080.c @@ -0,0 +1,80 @@ +/* + * arch/arm/plat-spear/pl080.c + * + * DMAC pl080 definitions for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/amba/pl08x.h> +#include <linux/amba/bus.h> +#include <linux/bug.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/spinlock_types.h> +#include <mach/spear.h> +#include <mach/misc_regs.h> + +static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x); + +struct { + unsigned char busy; + unsigned char val; +} signals[16] = {{0, 0}, }; + +int pl080_get_signal(struct pl08x_dma_chan *ch) +{ + const struct pl08x_channel_data *cd = ch->cd; + unsigned int signal = cd->min_signal, val; + unsigned long flags; + + spin_lock_irqsave(&lock, flags); + + /* Return if signal is already acquired by somebody else */ + if (signals[signal].busy && + (signals[signal].val != cd->muxval)) { + spin_unlock_irqrestore(&lock, flags); + return -EBUSY; + } + + /* If acquiring for the first time, configure it */ + if (!signals[signal].busy) { + val = readl(DMA_CHN_CFG); + + /* + * Each request line has two bits in DMA_CHN_CFG register. To + * goto the bits of current request line, do left shift of + * value by 2 * signal number. + */ + val &= ~(0x3 << (signal * 2)); + val |= cd->muxval << (signal * 2); + writel(val, DMA_CHN_CFG); + } + + signals[signal].busy++; + signals[signal].val = cd->muxval; + spin_unlock_irqrestore(&lock, flags); + + return signal; +} + +void pl080_put_signal(struct pl08x_dma_chan *ch) +{ + const struct pl08x_channel_data *cd = ch->cd; + unsigned long flags; + + spin_lock_irqsave(&lock, flags); + + /* if signal is not used */ + if (!signals[cd->min_signal].busy) + BUG(); + + signals[cd->min_signal].busy--; + + spin_unlock_irqrestore(&lock, flags); +} diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index 16f203e78d89..4471a232713a 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -13,7 +13,7 @@ #include <linux/io.h> #include <asm/system_misc.h> #include <asm/hardware/sp810.h> -#include <mach/hardware.h> +#include <mach/spear.h> #include <mach/generic.h> void spear_restart(char mode, const char *cmd) diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index abb5bdecd509..a3164d1647fd 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -15,14 +15,13 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/ioport.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/time.h> #include <linux/irq.h> #include <asm/mach/time.h> #include <mach/generic.h> -#include <mach/hardware.h> -#include <mach/irqs.h> /* * We would use TIMER0 and TIMER1 as clockevent and clocksource. @@ -175,7 +174,7 @@ static struct irqaction spear_timer_irq = { .handler = spear_timer_interrupt }; -static void __init spear_clockevent_init(void) +static void __init spear_clockevent_init(int irq) { u32 tick_rate; @@ -195,19 +194,19 @@ static void __init spear_clockevent_init(void) clockevents_register_device(&clkevt); - setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq); + setup_irq(irq, &spear_timer_irq); } -void __init spear_setup_timer(void) +void __init spear_setup_timer(resource_size_t base, int irq) { int ret; - if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) { + if (!request_mem_region(base, SZ_1K, "gpt0")) { pr_err("%s:cannot get IO addr\n", __func__); return; } - gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K); + gpt_base = ioremap(base, SZ_1K); if (!gpt_base) { pr_err("%s:ioremap failed for gpt\n", __func__); goto err_mem; @@ -225,7 +224,7 @@ void __init spear_setup_timer(void) goto err_clk; } - spear_clockevent_init(); + spear_clockevent_init(irq); spear_clocksource_init(); return; @@ -235,5 +234,5 @@ err_clk: err_iomap: iounmap(gpt_base); err_mem: - release_mem_region(SPEAR_GPT0_BASE, SZ_1K); + release_mem_region(base, SZ_1K); } |