diff options
Diffstat (limited to 'arch/arm')
42 files changed, 152 insertions, 187 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6d1e43d46187..032030361bef 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -209,7 +209,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-n900.dtb \ omap3-n9.dtb \ omap3-n950.dtb \ - omap3-tobi.dtb \ + omap3-overo-tobi.dtb \ + omap3-overo-storm-tobi.dtb \ omap3-gta04.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 4718ec4a4dbf..486880b74831 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -121,7 +121,7 @@ ti,model = "AM335x-EVMSK"; ti,audio-codec = <&tlv320aic3106>; ti,mcasp-controller = <&mcasp1>; - ti,codec-clock-rate = <24576000>; + ti,codec-clock-rate = <24000000>; ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT"; @@ -256,6 +256,12 @@ >; }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ @@ -456,6 +462,9 @@ status = "okay"; vmmc-supply = <&vmmc_reg>; bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; &sham { diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 66609684d41b..9480cf891f8c 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -23,6 +23,7 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + eth3 = ð3; }; cpus { @@ -291,7 +292,7 @@ interrupts = <91>; }; - ethernet@34000 { + eth3: ethernet@34000 { compatible = "marvell,armada-370-neta"; reg = <0x34000 0x4000>; interrupts = <14>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 2b76524f4aa7..187fd46b7b5e 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -379,15 +379,6 @@ #clock-cells = <1>; }; - pmu_intc: pmu-interrupt-ctrl@d0050 { - compatible = "marvell,dove-pmu-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xd0050 0x8>; - interrupts = <33>; - marvell,#interrupts = <7>; - }; - pinctrl: pin-ctrl@d0200 { compatible = "marvell,dove-pinctrl"; reg = <0xd0200 0x10>; @@ -610,8 +601,6 @@ rtc: real-time-clock@d8500 { compatible = "marvell,orion-rtc"; reg = <0xd8500 0x20>; - interrupt-parent = <&pmu_intc>; - interrupts = <5>; }; gpio2: gpio-ctrl@e8400 { diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index fd8fc7cd53f3..5bfae54fb780 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -52,12 +52,6 @@ }; }; - codec: spdif-transmitter { - compatible = "linux,spdif-dit"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_spdif>; - }; - sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; @@ -111,7 +105,7 @@ }; pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>; + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { @@ -142,6 +136,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_spdif>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 64daa3b311f6..c2a24888a276 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -46,12 +46,6 @@ }; }; - codec: spdif-transmitter { - compatible = "linux,spdif-dit"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_spdif>; - }; - sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; @@ -89,7 +83,7 @@ }; pinctrl_cubox_i_spdif: cubox-i-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>; + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { @@ -121,6 +115,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_spdif>; status = "okay"; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts index b9b55c95a566..c551e4af4d83 100644 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ b/arch/arm/boot/dts/omap3-gta04.dts @@ -32,7 +32,7 @@ aux-button { label = "aux"; linux,code = <169>; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; gpio-key,wakeup; }; }; @@ -92,6 +92,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; + interrupt-parent = <&gpio4>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; }; /* leds */ @@ -141,8 +143,8 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; bus-width = <4>; + ti,non-removable; }; &mmc2 { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 39828ce464ee..9938b5dc1909 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -14,5 +14,5 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 6fc85f963530..0bf40c90faba 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -1,6 +1,6 @@ /* * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> - * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi> + * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 (or later) as @@ -13,7 +13,7 @@ / { model = "Nokia N900"; - compatible = "nokia,omap3-n900", "ti,omap3"; + compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index b076a526b999..261c5589bfa3 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -14,5 +14,5 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts new file mode 100644 index 000000000000..966b5c9cd96a --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap3-overo-tobi-common.dtsi" + +/ { + model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; +}; + diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 7e4ad2aec37a..4edc013a91c1 100644 --- a/arch/arm/boot/dts/omap3-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -13,9 +13,6 @@ #include "omap3-overo.dtsi" / { - model = "TI OMAP3 Gumstix Overo on Tobi"; - compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"; - leds { compatible = "gpio-leds"; heartbeat { diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi.dts new file mode 100644 index 000000000000..de5653e1b5ca --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-tobi.dts @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap34xx.dtsi" +#include "omap3-overo-tobi-common.dtsi" + +/ { + model = "OMAP35xx Gumstix Overo on Tobi"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"; +}; + diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index a461d2fd1fb0..597099907f8e 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -9,9 +9,6 @@ /* * The Gumstix Overo must be combined with an expansion board. */ -/dts-v1/; - -#include "omap34xx.dtsi" / { pwmleds { diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 389e987ec281..44ec401ec366 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -57,6 +57,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -72,6 +74,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 480ecda3416b..48d2a7f4d0c0 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -94,6 +94,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -109,6 +111,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 9104224124ee..1e156d9d0506 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -28,7 +28,7 @@ compatible = "nvidia,cardhu", "nvidia,tegra30"; aliases { - rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc0 = "/i2c@7000d000/tps65911@2d"; rtc1 = "/rtc@7000e000"; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index ed8e7700b46d..19a84e933f4e 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -170,6 +170,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -185,6 +187,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi deleted file mode 100644 index c843720bd3e5..000000000000 --- a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi +++ /dev/null @@ -1,58 +0,0 @@ - -/ { - testcase-data { - interrupts { - #address-cells = <1>; - #size-cells = <1>; - test_intc0: intc0 { - interrupt-controller; - #interrupt-cells = <1>; - }; - - test_intc1: intc1 { - interrupt-controller; - #interrupt-cells = <3>; - }; - - test_intc2: intc2 { - interrupt-controller; - #interrupt-cells = <2>; - }; - - test_intmap0: intmap0 { - #interrupt-cells = <1>; - #address-cells = <0>; - interrupt-map = <1 &test_intc0 9>, - <2 &test_intc1 10 11 12>, - <3 &test_intc2 13 14>, - <4 &test_intc2 15 16>; - }; - - test_intmap1: intmap1 { - #interrupt-cells = <2>; - interrupt-map = <0x5000 1 2 &test_intc0 15>; - }; - - interrupts0 { - interrupt-parent = <&test_intc0>; - interrupts = <1>, <2>, <3>, <4>; - }; - - interrupts1 { - interrupt-parent = <&test_intmap0>; - interrupts = <1>, <2>, <3>, <4>; - }; - - interrupts-extended0 { - reg = <0x5000 0x100>; - interrupts-extended = <&test_intc0 1>, - <&test_intc1 2 3 4>, - <&test_intc2 5 6>, - <&test_intmap0 1>, - <&test_intmap0 2>, - <&test_intmap0 3>, - <&test_intmap1 1 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/testcases/tests-phandle.dtsi b/arch/arm/boot/dts/testcases/tests-phandle.dtsi deleted file mode 100644 index 0007d3cd7dc2..000000000000 --- a/arch/arm/boot/dts/testcases/tests-phandle.dtsi +++ /dev/null @@ -1,39 +0,0 @@ - -/ { - testcase-data { - phandle-tests { - provider0: provider0 { - #phandle-cells = <0>; - }; - - provider1: provider1 { - #phandle-cells = <1>; - }; - - provider2: provider2 { - #phandle-cells = <2>; - }; - - provider3: provider3 { - #phandle-cells = <3>; - }; - - consumer-a { - phandle-list = <&provider1 1>, - <&provider2 2 0>, - <0>, - <&provider3 4 4 3>, - <&provider2 5 100>, - <&provider0>, - <&provider1 7>; - phandle-list-names = "first", "second", "third"; - - phandle-list-bad-phandle = <12345678 0 0>; - phandle-list-bad-args = <&provider2 1 0>, - <&provider3 0>; - empty-property; - unterminated-string = [40 41 42 43]; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/testcases/tests.dtsi b/arch/arm/boot/dts/testcases/tests.dtsi deleted file mode 100644 index 3f123ecc9dd7..000000000000 --- a/arch/arm/boot/dts/testcases/tests.dtsi +++ /dev/null @@ -1,2 +0,0 @@ -/include/ "tests-phandle.dtsi" -/include/ "tests-interrupts.dtsi" diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index f43907c40c93..65f657711323 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -1,4 +1,4 @@ -/include/ "versatile-ab.dts" +#include <versatile-ab.dts> / { model = "ARM Versatile PB"; @@ -47,4 +47,4 @@ }; }; -/include/ "testcases/tests.dtsi" +#include <testcases.dtsi> diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index e9a49fe0284e..8b8b61685a34 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -212,6 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *, static inline void __flush_icache_all(void) { __flush_icache_preferred(); + dsb(); } /* diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 03243f7eeddf..85c60adc8b60 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -120,13 +120,16 @@ /* * 2nd stage PTE definitions for LPAE. */ -#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ -#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ +#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x0) << 2) /* strongly ordered */ +#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* normal inner write-through */ +#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* normal inner write-back */ +#define L_PTE_S2_MT_DEV_SHARED (_AT(pteval_t, 0x1) << 2) /* device */ +#define L_PTE_S2_MT_MASK (_AT(pteval_t, 0xf) << 2) -#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */ +#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ +#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ + +#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */ /* * Hyp-mode PL2 PTE definitions for LPAE. diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index ef3c6072aa45..ac4bfae26702 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -37,18 +37,9 @@ static inline void dsb_sev(void) { -#if __LINUX_ARM_ARCH__ >= 7 - __asm__ __volatile__ ( - "dsb ishst\n" - SEV - ); -#else - __asm__ __volatile__ ( - "mcr p15, 0, %0, c7, c10, 4\n" - SEV - : : "r" (0) - ); -#endif + + dsb(ishst); + __asm__(SEV); } /* diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b0df9761de6d..1e8b030dbefd 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -731,7 +731,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) kernel_data.end = virt_to_phys(_end - 1); for_each_memblock(memory, region) { - res = memblock_virt_alloc_low(sizeof(*res), 0); + res = memblock_virt_alloc(sizeof(*res), 0); res->name = "System RAM"; res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region)); res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1; diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 1d8248ea5669..bd18bb8b2770 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -878,7 +878,8 @@ static int hyp_init_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd, void *v) { - if (cmd == CPU_PM_EXIT) { + if (cmd == CPU_PM_EXIT && + __hyp_get_vectors() == hyp_default_vectors) { cpu_init_hyp_mode(NULL); return NOTIFY_OK; } diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index ddc15539bad2..0d68d4073068 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -220,6 +220,10 @@ after_vfp_restore: * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are * passed in r0 and r1. * + * A function pointer with a value of 0xffffffff has a special meaning, + * and is used to implement __hyp_get_vectors in the same way as in + * arch/arm/kernel/hyp_stub.S. + * * The calling convention follows the standard AAPCS: * r0 - r3: caller save * r12: caller save @@ -363,6 +367,11 @@ hyp_hvc: host_switch_to_hyp: pop {r0, r1, r2} + /* Check for __hyp_get_vectors */ + cmp r0, #-1 + mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR + beq 1f + push {lr} mrs lr, SPSR push {lr} @@ -378,7 +387,7 @@ THUMB( orr lr, #1) pop {lr} msr SPSR_csxf, lr pop {lr} - eret +1: eret guest_trap: load_vcpu @ Load VCPU pointer to r0 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index befcaf5d0574..ec419649320f 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -101,11 +101,9 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o -ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o # i.MX6SL reuses i.MX6Q code obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o -endif # i.MX5 based machines obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 59c3b9b26bb4..baf439dc22d8 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -144,13 +144,11 @@ void imx6q_set_chicken_bit(void); void imx_cpu_die(unsigned int cpu); int imx_cpu_kill(unsigned int cpu); -#ifdef CONFIG_PM void imx6q_pm_init(void); void imx6q_pm_set_ccm_base(void __iomem *base); +#ifdef CONFIG_PM void imx5_pm_init(void); #else -static inline void imx6q_pm_init(void) {} -static inline void imx6q_pm_set_ccm_base(void __iomem *base) {} static inline void imx5_pm_init(void) {} #endif diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 91449c5cb70f..85089d821982 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -156,6 +156,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { .register_dev = 1, .hmc_mode = 16, .pins[0] = 6, + .extcon = "tahvo-usb", }; #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index e2ce4f8366a7..0af7ca02314d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -50,6 +50,7 @@ config SOC_OMAP5 bool "TI OMAP5" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC select CPU_V7 @@ -63,6 +64,7 @@ config SOC_AM33XX bool "TI AM33XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select CPU_V7 select MULTI_IRQ_HANDLER @@ -72,6 +74,7 @@ config SOC_AM43XX depends on ARCH_MULTI_V7 select CPU_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select MULTI_IRQ_HANDLER select ARM_GIC select MACH_OMAP_GENERIC @@ -80,6 +83,7 @@ config SOC_DRA7XX bool "TI DRA7XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC select CPU_V7 @@ -268,9 +272,6 @@ config MACH_OMAP_3430SDP default y select OMAP_PACKAGE_CBB -config MACH_NOKIA_N800 - bool - config MACH_NOKIA_N810 bool @@ -281,7 +282,6 @@ config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on SOC_OMAP2420 default y - select MACH_NOKIA_N800 select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX select OMAP_PACKAGE_ZAC diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index d24926e6340f..ab43755364f5 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1339,7 +1339,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np, of_property_read_bool(np, "gpmc,time-para-granularity"); } -#ifdef CONFIG_MTD_NAND +#if IS_ENABLED(CONFIG_MTD_NAND) static const char * const nand_xfer_types[] = { [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", @@ -1429,7 +1429,7 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, } #endif -#ifdef CONFIG_MTD_ONENAND +#if IS_ENABLED(CONFIG_MTD_ONENAND) static int gpmc_probe_onenand_child(struct platform_device *pdev, struct device_node *child) { diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index d408b15b4fbf..af432b191255 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -179,15 +179,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = { .length = L4_EMU_34XX_SIZE, .type = MT_DEVICE }, -#if defined(CONFIG_DEBUG_LL) && \ - (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3)) - { - .virtual = ZOOM_UART_VIRT, - .pfn = __phys_to_pfn(ZOOM_UART_BASE), - .length = SZ_1M, - .type = MT_DEVICE - }, -#endif }; #endif diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index f70583fee59f..29997bde277d 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -38,6 +38,7 @@ #include <linux/mtd/physmap.h> #include <linux/usb/gpio_vbus.h> #include <linux/reboot.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/max1586.h> #include <linux/slab.h> #include <linux/i2c/pxa-i2c.h> @@ -714,6 +715,10 @@ static struct gpio global_gpios[] = { { GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" }, }; +static struct regulator_consumer_supply fixed_5v0_consumers[] = { + REGULATOR_SUPPLY("power", "pwm-backlight"), +}; + static void __init mioa701_machine_init(void) { int rc; @@ -753,6 +758,10 @@ static void __init mioa701_machine_init(void) pxa_set_i2c_info(&i2c_pdata); pxa27x_set_i2c_power_info(NULL); pxa_set_camera_info(&mioa701_pxacamera_platform_data); + + regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers, + ARRAY_SIZE(fixed_5v0_consumers), + 5000000); } static void mioa701_machine_exit(void) diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 4ae0286b468d..f55b05a29b55 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -24,6 +24,7 @@ #include <linux/cpu_pm.h> #include <linux/suspend.h> #include <linux/err.h> +#include <linux/slab.h> #include <linux/clk/tegra.h> #include <asm/smp_plat.h> diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 303a285d80fd..6191603379e1 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -73,10 +73,20 @@ u32 tegra_uart_config[3] = { static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 + static const struct of_device_id pl310_ids[] __initconst = { + { .compatible = "arm,pl310-cache", }, + {} + }; + + struct device_node *np; int ret; void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; u32 aux_ctrl, cache_type; + np = of_find_matching_node(NULL, pl310_ids); + if (!np) + return; + cache_type = readl(p + L2X0_CACHE_TYPE); aux_ctrl = (cache_type & 0x700) << (17-8); aux_ctrl |= 0x7C400001; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 1a77450e728a..11b3914660d2 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1358,7 +1358,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); - if (gfp & GFP_ATOMIC) + if (!(gfp & __GFP_WAIT)) return __iommu_alloc_atomic(dev, size, handle); /* diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index d5a982d15a88..7ea641b7aa7d 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -38,6 +38,7 @@ static inline pmd_t *pmd_off_k(unsigned long virt) struct mem_type { pteval_t prot_pte; + pteval_t prot_pte_s2; pmdval_t prot_l1; pmdval_t prot_sect; unsigned int domain; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4f08c133cc25..a623cb3ad012 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -232,12 +232,16 @@ __setup("noalign", noalign_setup); #endif /* ifdef CONFIG_CPU_CP15 / else */ #define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN +#define PROT_PTE_S2_DEVICE PROT_PTE_DEVICE #define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE static struct mem_type mem_types[] = { [MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED | L_PTE_SHARED, + .prot_pte_s2 = s2_policy(PROT_PTE_S2_DEVICE) | + s2_policy(L_PTE_S2_MT_DEV_SHARED) | + L_PTE_SHARED, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PROT_SECT_DEVICE | PMD_SECT_S, .domain = DOMAIN_IO, @@ -508,7 +512,8 @@ static void __init build_mem_type_table(void) cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; s2_pgprot = cp->pte_s2; - hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte; + hyp_device_pgprot = mem_types[MT_DEVICE].prot_pte; + s2_device_pgprot = mem_types[MT_DEVICE].prot_pte_s2; /* * ARMv6 and above have extended page tables. diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 45dc29f85d56..32b3558321c4 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -208,7 +208,6 @@ __v6_setup: mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register @@ -218,6 +217,8 @@ __v6_setup: ALT_UP(orr r8, r8, #TTB_FLAGS_UP) mcr p15, 0, r8, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer and + @ complete invalidations adr r5, v6_crval ldmia r5, {r5, r6} ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index bd1781979a39..74f6033e76dd 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -351,7 +351,6 @@ __v7_setup: 4: mov r10, #0 mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate - dsb #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup @@ -360,6 +359,7 @@ __v7_setup: mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR #endif + dsb @ Complete invalidations #ifndef CONFIG_ARM_THUMBEE mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE and r0, r0, #(0xf << 12) @ ThumbEE enabled field |