summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c2
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c4
-rw-r--r--arch/arm/mach-omap2/devices.c36
-rw-r--r--arch/arm/mach-omap2/gpmc.c2
-rw-r--r--arch/arm/mach-omap2/hsmmc.c158
-rw-r--r--arch/arm/mach-omap2/hsmmc.h9
-rw-r--r--arch/arm/mach-omap2/mmc.h10
-rw-r--r--arch/arm/mach-omap2/omap4-common.c1
-rw-r--r--arch/arm/mach-omap2/omap_device.c4
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c4
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c8
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_data.c1
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c8
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c4
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_54xx_data.c4
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c4
-rw-r--r--arch/arm/mach-omap2/omap_phy_internal.c8
-rw-r--r--arch/arm/mach-omap2/serial.c3
18 files changed, 94 insertions, 176 deletions
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 97767a27ca9d..e0ad64fde20e 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -21,8 +21,10 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
+#include <linux/mmc/host.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/platform_data/mmc-omap.h>
#include <linux/mfd/menelaus.h>
#include <sound/tlv320aic3x.h>
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ddfc8df83c6a..3d5040f82e90 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -484,7 +484,7 @@ static struct omap_mux_partition *partition;
* Current flows to eMMC when eMMC is off and the data lines are pulled up,
* so pull them down. N.B. we pull 8 lines because we are using 8 lines.
*/
-static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
+static void rx51_mmc2_remux(struct device *dev, int power_on)
{
if (power_on)
omap_mux_write_array(partition, rx51_mmc2_on_mux);
@@ -500,7 +500,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
.cover_only = true,
.gpio_cd = 160,
.gpio_wp = -EINVAL,
- .power_saving = true,
},
{
.name = "internal",
@@ -510,7 +509,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
- .power_saving = true,
.remux = rx51_mmc2_remux,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 324f02bf8a51..492ef1607115 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -49,7 +49,7 @@ static int __init omap3_l3_init(void)
* To avoid code running on other OMAPs in
* multi-omap builds
*/
- if (!(cpu_is_omap34xx()))
+ if (!(cpu_is_omap34xx()) || of_have_populated_dt())
return -ENODEV;
snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
@@ -67,40 +67,6 @@ static int __init omap3_l3_init(void)
}
omap_postcore_initcall(omap3_l3_init);
-static int __init omap4_l3_init(void)
-{
- int i;
- struct omap_hwmod *oh[3];
- struct platform_device *pdev;
- char oh_name[L3_MODULES_MAX_LEN];
-
- /* If dtb is there, the devices will be created dynamically */
- if (of_have_populated_dt())
- return -ENODEV;
-
- /*
- * To avoid code running on other OMAPs in
- * multi-omap builds
- */
- if (!cpu_is_omap44xx() && !soc_is_omap54xx())
- return -ENODEV;
-
- for (i = 0; i < L3_MODULES; i++) {
- snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
-
- oh[i] = omap_hwmod_lookup(oh_name);
- if (!(oh[i]))
- pr_err("could not look up %s\n", oh_name);
- }
-
- pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL, 0);
-
- WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
-
- return PTR_RET(pdev);
-}
-omap_postcore_initcall(omap4_l3_init);
-
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
static struct resource omap2cam_resources[] = {
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 5fa3755261ce..8fb5bbce102f 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1394,8 +1394,6 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
if (gpmc_nand_data->elm_of_node == NULL)
gpmc_nand_data->elm_of_node =
of_parse_phandle(child, "elm_id", 0);
- if (gpmc_nand_data->elm_of_node == NULL)
- pr_warn("%s: ti,elm-id property not found\n", __func__);
/* select ecc-scheme for NAND */
if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 07d4c7b35754..dc6e79c4484a 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -14,14 +14,15 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/mmc/host.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include "soc.h"
#include "omap_device.h"
#include "omap-pm.h"
#include "mux.h"
-#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
@@ -32,25 +33,14 @@ static u16 control_devconf1_offset;
#define HSMMC_NAME_LEN 9
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-
-static int hsmmc_get_context_loss(struct device *dev)
-{
- return omap_pm_get_dev_context_loss_count(dev);
-}
-
-#else
-#define hsmmc_get_context_loss NULL
-#endif
-
-static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void omap_hsmmc1_before_set_reg(struct device *dev,
+ int power_on, int vdd)
{
u32 reg, prog_io;
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
- if (mmc->slots[0].remux)
- mmc->slots[0].remux(dev, slot, power_on);
+ if (mmc->remux)
+ mmc->remux(dev, power_on);
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
@@ -72,7 +62,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
}
- if (mmc->slots[0].internal_clock) {
+ if (mmc->internal_clock) {
reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
reg |= OMAP2_MMCSDIO1ADPCLKISEL;
omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
@@ -96,8 +86,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
}
}
-static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
{
u32 reg;
@@ -120,34 +109,32 @@ static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
}
}
-static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
+static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
{
u32 reg;
reg = omap_ctrl_readl(control_devconf1_offset);
- if (mmc->slots[0].internal_clock)
+ if (mmc->internal_clock)
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
else
reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
-static void hsmmc2_before_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
- if (mmc->slots[0].remux)
- mmc->slots[0].remux(dev, slot, power_on);
+ if (mmc->remux)
+ mmc->remux(dev, power_on);
if (power_on)
hsmmc2_select_input_clk_src(mmc);
}
-static int am35x_hsmmc2_set_power(struct device *dev, int slot,
- int power_on, int vdd)
+static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
if (power_on)
hsmmc2_select_input_clk_src(mmc);
@@ -155,23 +142,22 @@ static int am35x_hsmmc2_set_power(struct device *dev, int slot,
return 0;
}
-static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
- int vdd)
+static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
{
return 0;
}
-static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
- int controller_nr)
+static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
+ *mmc_controller, int controller_nr)
{
- if (gpio_is_valid(mmc_controller->slots[0].switch_pin) &&
- (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
- OMAP_PIN_INPUT_PULLUP);
- if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) &&
- (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
- OMAP_PIN_INPUT_PULLUP);
+ if (gpio_is_valid(mmc_controller->switch_pin) &&
+ (mmc_controller->switch_pin < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->switch_pin,
+ OMAP_PIN_INPUT_PULLUP);
+ if (gpio_is_valid(mmc_controller->gpio_wp) &&
+ (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->gpio_wp,
+ OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap34xx()) {
if (controller_nr == 0) {
omap_mux_init_signal("sdmmc1_clk",
@@ -180,7 +166,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat0",
OMAP_PIN_INPUT_PULLUP);
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc1_dat1",
OMAP_PIN_INPUT_PULLUP);
@@ -189,7 +175,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_mux_init_signal("sdmmc1_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc1_dat4",
OMAP_PIN_INPUT_PULLUP);
@@ -214,7 +200,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
* For 8 wire configurations, Lines DAT4, 5, 6 and 7
* need to be muxed in the board-*.c files
*/
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc2_dat1",
OMAP_PIN_INPUT_PULLUP);
@@ -223,7 +209,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_mux_init_signal("sdmmc2_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
OMAP_PIN_INPUT_PULLUP);
@@ -243,7 +229,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
}
static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
- struct omap_mmc_platform_data *mmc)
+ struct omap_hsmmc_platform_data *mmc)
{
char *hc_name;
@@ -259,38 +245,22 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
else
snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
c->mmc, 1);
- mmc->slots[0].name = hc_name;
- mmc->nr_slots = 1;
- mmc->slots[0].caps = c->caps;
- mmc->slots[0].pm_caps = c->pm_caps;
- mmc->slots[0].internal_clock = !c->ext_clock;
- mmc->max_freq = c->max_freq;
+ mmc->name = hc_name;
+ mmc->caps = c->caps;
+ mmc->internal_clock = !c->ext_clock;
mmc->reg_offset = 0;
- mmc->get_context_loss_count = hsmmc_get_context_loss;
- mmc->slots[0].switch_pin = c->gpio_cd;
- mmc->slots[0].gpio_wp = c->gpio_wp;
+ mmc->switch_pin = c->gpio_cd;
+ mmc->gpio_wp = c->gpio_wp;
- mmc->slots[0].remux = c->remux;
- mmc->slots[0].init_card = c->init_card;
+ mmc->remux = c->remux;
+ mmc->init_card = c->init_card;
if (c->cover_only)
- mmc->slots[0].cover = 1;
+ mmc->cover = 1;
if (c->nonremovable)
- mmc->slots[0].nonremovable = 1;
-
- if (c->power_saving)
- mmc->slots[0].power_saving = 1;
-
- if (c->no_off)
- mmc->slots[0].no_off = 1;
-
- if (c->no_off_init)
- mmc->slots[0].no_regulator_off_init = c->no_off_init;
-
- if (c->vcc_aux_disable_is_sleep)
- mmc->slots[0].vcc_aux_disable_is_sleep = 1;
+ mmc->nonremovable = 1;
/*
* NOTE: MMC slots should have a Vcc regulator set up.
@@ -300,42 +270,42 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
* temporary HACK: ocr_mask instead of fixed supply
*/
if (soc_is_am35xx())
- mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+ mmc->ocr_mask = MMC_VDD_165_195 |
MMC_VDD_26_27 |
MMC_VDD_27_28 |
MMC_VDD_29_30 |
MMC_VDD_30_31 |
MMC_VDD_31_32;
else
- mmc->slots[0].ocr_mask = c->ocr_mask;
+ mmc->ocr_mask = c->ocr_mask;
if (!soc_is_am35xx())
- mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+ mmc->features |= HSMMC_HAS_PBIAS;
switch (c->mmc) {
case 1:
- if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ if (mmc->features & HSMMC_HAS_PBIAS) {
/* on-chip level shifting via PBIAS0/PBIAS1 */
- mmc->slots[0].before_set_reg =
+ mmc->before_set_reg =
omap_hsmmc1_before_set_reg;
- mmc->slots[0].after_set_reg =
+ mmc->after_set_reg =
omap_hsmmc1_after_set_reg;
}
if (soc_is_am35xx())
- mmc->slots[0].set_power = nop_mmc_set_power;
+ mmc->set_power = nop_mmc_set_power;
/* OMAP3630 HSMMC1 supports only 4-bit */
if (cpu_is_omap3630() &&
(c->caps & MMC_CAP_8_BIT_DATA)) {
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
- mmc->slots[0].caps = c->caps;
+ mmc->caps = c->caps;
}
break;
case 2:
if (soc_is_am35xx())
- mmc->slots[0].set_power = am35x_hsmmc2_set_power;
+ mmc->set_power = am35x_hsmmc2_set_power;
if (c->ext_clock)
c->transceiver = 1;
@@ -343,17 +313,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
}
- if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ if (mmc->features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
- mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
- mmc->slots[0].after_set_reg = NULL;
+ mmc->before_set_reg = hsmmc2_before_set_reg;
+ mmc->after_set_reg = NULL;
}
break;
case 3:
case 4:
case 5:
- mmc->slots[0].before_set_reg = NULL;
- mmc->slots[0].after_set_reg = NULL;
+ mmc->before_set_reg = NULL;
+ mmc->after_set_reg = NULL;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
@@ -368,7 +338,7 @@ static int omap_hsmmc_done;
void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
{
struct platform_device *pdev;
- struct omap_mmc_platform_data *mmc_pdata;
+ struct omap_hsmmc_platform_data *mmc_pdata;
int res;
if (omap_hsmmc_done != 1)
@@ -388,8 +358,8 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
if (!mmc_pdata)
continue;
- mmc_pdata->slots[0].switch_pin = c->gpio_cd;
- mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
+ mmc_pdata->switch_pin = c->gpio_cd;
+ mmc_pdata->gpio_wp = c->gpio_wp;
res = omap_device_register(pdev);
if (res)
@@ -408,12 +378,12 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
struct omap_device *od;
struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
- struct omap_mmc_platform_data *mmc_data;
- struct omap_mmc_dev_attr *mmc_dev_attr;
+ struct omap_hsmmc_platform_data *mmc_data;
+ struct omap_hsmmc_dev_attr *mmc_dev_attr;
char *name;
int res;
- mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
+ mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL);
if (!mmc_data) {
pr_err("Cannot allocate memory for mmc device!\n");
return;
@@ -463,7 +433,7 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
}
res = platform_device_add_data(pdev, mmc_data,
- sizeof(struct omap_mmc_platform_data));
+ sizeof(struct omap_hsmmc_platform_data));
if (res) {
pr_err("Could not add pdata for %s\n", name);
goto put_pdev;
@@ -489,7 +459,7 @@ put_pdev:
platform_device_put(pdev);
free_name:
- kfree(mmc_data->slots[0].name);
+ kfree(mmc_data->name);
free_mmc:
kfree(mmc_data);
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 7f2e790e0929..148cd9b15499 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -12,25 +12,18 @@ struct omap2_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
u32 caps; /* 4/8 wires and any additional host
* capabilities OR'd (ref. linux/mmc/host.h) */
- u32 pm_caps; /* PM capabilities */
bool transceiver; /* MMC-2 option */
bool ext_clock; /* use external pin for input clock */
bool cover_only; /* No card detect - just cover switch */
bool nonremovable; /* Nonremovable e.g. eMMC */
- bool power_saving; /* Try to sleep or power off when possible */
- bool no_off; /* power_saving and power is not to go off */
- bool no_off_init; /* no power off when not in MMC sleep state */
- bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
bool deferred; /* mmc needs a deferred probe */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct platform_device *pdev; /* mmc controller instance */
int ocr_mask; /* temporary HACK */
- int max_freq; /* maximum clock, if constrained by external
- * circuitry, or 0 for default */
/* Remux (pad configuration) when powering on/off */
- void (*remux)(struct device *dev, int slot, int power_on);
+ void (*remux)(struct device *dev, int power_on);
/* init some special card */
void (*init_card)(struct mmc_card *card);
};
diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h
index 0cd4b089da9c..30d39b97e7dd 100644
--- a/arch/arm/mach-omap2/mmc.h
+++ b/arch/arm/mach-omap2/mmc.h
@@ -1,5 +1,3 @@
-#include <linux/mmc/host.h>
-#include <linux/platform_data/mmc-omap.h>
#define OMAP24XX_NR_MMC 2
#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
@@ -7,14 +5,6 @@
#define OMAP4_MMC_REG_OFFSET 0x100
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-
struct omap_hwmod;
int omap_msdi_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 16b20cedc38d..b7cb44abe49b 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -36,7 +36,6 @@
#include "soc.h"
#include "iomap.h"
#include "common.h"
-#include "mmc.h"
#include "prminst44xx.h"
#include "prcm_mpu44xx.h"
#include "omap4-sar-layout.h"
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index d22c30d3ccfa..8c58b71c2727 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -917,6 +917,10 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
static int __init omap_device_late_init(void)
{
bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+
+ WARN(!of_have_populated_dt(),
+ "legacy booting deprecated, please update to boot with .dts\n");
+
return 0;
}
omap_late_initcall_sync(omap_device_late_init);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c2555cb95e71..79127b35fe60 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -15,12 +15,12 @@
#include <linux/i2c-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
-#include "mmc.h"
#include "l3_2xxx.h"
#include "soc.h"
@@ -372,7 +372,7 @@ static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = {
{ .role = "dbck", .clk = "mmchsdb1_fck" },
};
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index a579b89ce9b7..cabc5695b504 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -15,10 +15,10 @@
*/
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include "omap_hwmod.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "cm33xx.h"
#include "prm33xx.h"
@@ -836,7 +836,7 @@ static struct omap_hwmod_class am33xx_mmc_hwmod_class = {
};
/* mmc0 */
-static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc0_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
@@ -854,7 +854,7 @@ struct omap_hwmod am33xx_mmc0_hwmod = {
};
/* mmc1 */
-static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
@@ -872,7 +872,7 @@ struct omap_hwmod am33xx_mmc1_hwmod = {
};
/* mmc2 */
-static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc2_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
struct omap_hwmod am33xx_mmc2_hwmod = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 6b406ca4bd3b..0cf7b563dcd1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -27,7 +27,6 @@
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 2a78b093c0ce..11468eea3871 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -18,6 +18,7 @@
#include <linux/i2c-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/omap-dma.h>
#include "l3_3xxx.h"
@@ -37,7 +38,6 @@
#include "cm-regbits-34xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "serial.h"
@@ -1786,12 +1786,12 @@ static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = {
{ .role = "dbck", .clk = "omap_32k_fck", },
};
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_pre_es3_dev_attr = {
.flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
};
@@ -1854,7 +1854,7 @@ static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = {
};
/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc2_pre_es3_dev_attr = {
.flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 44e5634bba34..d8a3cf1c1787 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -39,7 +40,6 @@
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP4 interrupts external to MPUSS */
@@ -1952,7 +1952,7 @@ static struct omap_hwmod_dma_info omap44xx_mmc1_sdma_reqs[] = {
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 1103aa0e0d29..5ec786a76d3c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -33,7 +34,6 @@
#include "cm2_54xx.h"
#include "prm54xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP5 interrupts external to MPUSS */
@@ -1269,7 +1269,7 @@ static struct omap_hwmod_opt_clk mmc1_opt_clks[] = {
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 5684f112654b..711c97e90990 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -33,7 +34,6 @@
#include "cm2_7xx.h"
#include "prm7xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "soc.h"
@@ -1301,7 +1301,7 @@ static struct omap_hwmod_opt_clk mmc1_opt_clks[] = {
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 50640b38f0bf..1a19fa096bab 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -21,6 +21,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/clk.h>
@@ -97,13 +99,13 @@ void am35x_musb_phy_power(u8 on)
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
- pr_info(KERN_INFO "Waiting for PHY clock good...\n");
+ pr_info("Waiting for PHY clock good...\n");
while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
& CONF2_PHYCLKGD)) {
cpu_relax();
if (time_after(jiffies, timeout)) {
- pr_err(KERN_ERR "musb PHY clock good timed out\n");
+ pr_err("musb PHY clock good timed out\n");
break;
}
}
@@ -145,7 +147,7 @@ void am35x_set_mode(u8 musb_mode)
devconf2 |= CONF2_NO_OVERRIDE;
break;
default:
- pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
+ pr_info("Unsupported mode %u\n", musb_mode);
}
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index a388f8c1bcb3..57dee0c7cd2b 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -263,9 +263,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
omap_up.dma_rx_timeout = info->dma_rx_timeout;
omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
omap_up.autosuspend_timeout = info->autosuspend_timeout;
- omap_up.DTR_gpio = info->DTR_gpio;
- omap_up.DTR_inverted = info->DTR_inverted;
- omap_up.DTR_present = info->DTR_present;
pdata = &omap_up;
pdata_size = sizeof(struct omap_uart_port_info);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 05:54:44 +0000