diff options
Diffstat (limited to 'arch/arm/mach-kirkwood/t5325-setup.c')
| -rw-r--r-- | arch/arm/mach-kirkwood/t5325-setup.c | 216 |
1 files changed, 0 insertions, 216 deletions
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c deleted file mode 100644 index 8736f8c97518..000000000000 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * - * HP t5325 Thin Client setup - * - * Copyright (C) 2010 Martin Michlmayr <tbm@cyrius.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/i2c.h> -#include <linux/mv643xx_eth.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <sound/alc5623.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include "common.h" -#include "mpp.h" - -static struct mtd_partition hp_t5325_partitions[] = { - { - .name = "u-boot env", - .size = SZ_64K, - .offset = SZ_512K + SZ_256K, - }, - { - .name = "permanent u-boot env", - .size = SZ_64K, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "HP env", - .size = SZ_64K, - .offset = MTDPART_OFS_APPEND, - }, - { - .name = "u-boot", - .size = SZ_512K, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "SSD firmware", - .size = SZ_256K, - .offset = SZ_512K, - }, -}; - -static const struct flash_platform_data hp_t5325_flash = { - .type = "mx25l8005", - .name = "spi_flash", - .parts = hp_t5325_partitions, - .nr_parts = ARRAY_SIZE(hp_t5325_partitions), -}; - -static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &hp_t5325_flash, - .irq = -1, - }, -}; - -static struct mv643xx_eth_platform_data hp_t5325_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv_sata_platform_data hp_t5325_sata_data = { - .n_ports = 2, -}; - -static struct gpio_keys_button hp_t5325_buttons[] = { - { - .code = KEY_POWER, - .gpio = 45, - .desc = "Power", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data hp_t5325_button_data = { - .buttons = hp_t5325_buttons, - .nbuttons = ARRAY_SIZE(hp_t5325_buttons), -}; - -static struct platform_device hp_t5325_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &hp_t5325_button_data, - } -}; - -static struct platform_device hp_t5325_audio_device = { - .name = "t5325-audio", - .id = -1, -}; - -static unsigned int hp_t5325_mpp_config[] __initdata = { - MPP0_NF_IO2, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_SPI_SCn, - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, - MPP13_GPIO, - MPP14_GPIO, - MPP15_GPIO, - MPP16_GPIO, - MPP17_GPIO, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GPIO, - MPP21_GPIO, - MPP22_GPIO, - MPP23_GPIO, - MPP32_GPIO, - MPP33_GE1_TXCTL, - MPP39_AU_I2SBCLK, - MPP40_AU_I2SDO, - MPP43_AU_I2SDI, - MPP41_AU_I2SLRCLK, - MPP42_AU_I2SMCLK, - MPP45_GPIO, /* Power button */ - MPP48_GPIO, /* Board power off */ - 0 -}; - -static struct alc5623_platform_data alc5621_data = { - .add_ctrl = 0x3700, - .jack_det_ctrl = 0x4810, -}; - -static struct i2c_board_info i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("alc5621", 0x1a), - .platform_data = &alc5621_data, - }, -}; - -#define HP_T5325_GPIO_POWER_OFF 48 - -static void hp_t5325_power_off(void) -{ - gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1); -} - -static void __init hp_t5325_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(hp_t5325_mpp_config); - - kirkwood_uart0_init(); - spi_register_board_info(hp_t5325_spi_slave_info, - ARRAY_SIZE(hp_t5325_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_i2c_init(); - kirkwood_ge00_init(&hp_t5325_ge00_data); - kirkwood_sata_init(&hp_t5325_sata_data); - kirkwood_ehci_init(); - platform_device_register(&hp_t5325_button_device); - platform_device_register(&hp_t5325_audio_device); - - i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); - kirkwood_audio_init(); - - if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0) - pm_power_off = hp_t5325_power_off; - else - pr_err("t5325: failed to configure power-off GPIO\n"); -} - -static int __init hp_t5325_pci_init(void) -{ - if (machine_is_t5325()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(hp_t5325_pci_init); - -MACHINE_START(T5325, "HP t5325 Thin Client") - /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .atag_offset = 0x100, - .init_machine = hp_t5325_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END |