diff options
Diffstat (limited to 'arch/arm/boot/dts/prima2.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/prima2.dtsi | 31 |
1 files changed, 30 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 055fca542120..3329719a9412 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -58,10 +58,11 @@ #size-cells = <1>; ranges = <0x88000000 0x88000000 0x40000>; - clock-controller@88000000 { + clks: clock-controller@88000000 { compatible = "sirf,prima2-clkc"; reg = <0x88000000 0x1000>; interrupts = <3>; + #clock-cells = <1>; }; reset-controller@88010000 { @@ -85,6 +86,7 @@ compatible = "sirf,prima2-memc"; reg = <0x90000000 0x10000>; interrupts = <27>; + clocks = <&clks 5>; }; }; @@ -104,6 +106,7 @@ compatible = "sirf,prima2-vpp"; reg = <0x90020000 0x10000>; interrupts = <31>; + clocks = <&clks 35>; }; }; @@ -117,6 +120,7 @@ compatible = "powervr,sgx531"; reg = <0x98000000 0x8000000>; interrupts = <6>; + clocks = <&clks 32>; }; }; @@ -130,6 +134,7 @@ compatible = "sirf,prima2-video-codec"; reg = <0xa0000000 0x8000000>; interrupts = <5>; + clocks = <&clks 33>; }; }; @@ -149,12 +154,14 @@ compatible = "sirf,prima2-gps"; reg = <0xa8010000 0x10000>; interrupts = <7>; + clocks = <&clks 9>; }; dsp@a9000000 { compatible = "sirf,prima2-dsp"; reg = <0xa9000000 0x1000000>; interrupts = <8>; + clocks = <&clks 8>; }; }; @@ -174,12 +181,14 @@ compatible = "sirf,prima2-nand"; reg = <0xb0030000 0x10000>; interrupts = <41>; + clocks = <&clks 26>; }; audio@b0040000 { compatible = "sirf,prima2-audio"; reg = <0xb0040000 0x10000>; interrupts = <35>; + clocks = <&clks 27>; }; uart0: uart@b0050000 { @@ -187,6 +196,7 @@ compatible = "sirf,prima2-uart"; reg = <0xb0050000 0x10000>; interrupts = <17>; + clocks = <&clks 13>; }; uart1: uart@b0060000 { @@ -194,6 +204,7 @@ compatible = "sirf,prima2-uart"; reg = <0xb0060000 0x10000>; interrupts = <18>; + clocks = <&clks 14>; }; uart2: uart@b0070000 { @@ -201,6 +212,7 @@ compatible = "sirf,prima2-uart"; reg = <0xb0070000 0x10000>; interrupts = <19>; + clocks = <&clks 15>; }; usp0: usp@b0080000 { @@ -208,6 +220,7 @@ compatible = "sirf,prima2-usp"; reg = <0xb0080000 0x10000>; interrupts = <20>; + clocks = <&clks 28>; }; usp1: usp@b0090000 { @@ -215,6 +228,7 @@ compatible = "sirf,prima2-usp"; reg = <0xb0090000 0x10000>; interrupts = <21>; + clocks = <&clks 29>; }; usp2: usp@b00a0000 { @@ -222,6 +236,7 @@ compatible = "sirf,prima2-usp"; reg = <0xb00a0000 0x10000>; interrupts = <22>; + clocks = <&clks 30>; }; dmac0: dma-controller@b00b0000 { @@ -229,6 +244,7 @@ compatible = "sirf,prima2-dmac"; reg = <0xb00b0000 0x10000>; interrupts = <12>; + clocks = <&clks 24>; }; dmac1: dma-controller@b0160000 { @@ -236,11 +252,13 @@ compatible = "sirf,prima2-dmac"; reg = <0xb0160000 0x10000>; interrupts = <13>; + clocks = <&clks 25>; }; vip@b00C0000 { compatible = "sirf,prima2-vip"; reg = <0xb00C0000 0x10000>; + clocks = <&clks 31>; }; spi0: spi@b00d0000 { @@ -248,6 +266,7 @@ compatible = "sirf,prima2-spi"; reg = <0xb00d0000 0x10000>; interrupts = <15>; + clocks = <&clks 19>; }; spi1: spi@b0170000 { @@ -255,6 +274,7 @@ compatible = "sirf,prima2-spi"; reg = <0xb0170000 0x10000>; interrupts = <16>; + clocks = <&clks 20>; }; i2c0: i2c@b00e0000 { @@ -262,6 +282,7 @@ compatible = "sirf,prima2-i2c"; reg = <0xb00e0000 0x10000>; interrupts = <24>; + clocks = <&clks 17>; }; i2c1: i2c@b00f0000 { @@ -269,12 +290,14 @@ compatible = "sirf,prima2-i2c"; reg = <0xb00f0000 0x10000>; interrupts = <25>; + clocks = <&clks 18>; }; tsc@b0110000 { compatible = "sirf,prima2-tsc"; reg = <0xb0110000 0x10000>; interrupts = <33>; + clocks = <&clks 16>; }; gpio: pinctrl@b0120000 { @@ -507,17 +530,20 @@ pwm@b0130000 { compatible = "sirf,prima2-pwm"; reg = <0xb0130000 0x10000>; + clocks = <&clks 21>; }; efusesys@b0140000 { compatible = "sirf,prima2-efuse"; reg = <0xb0140000 0x10000>; + clocks = <&clks 22>; }; pulsec@b0150000 { compatible = "sirf,prima2-pulsec"; reg = <0xb0150000 0x10000>; interrupts = <48>; + clocks = <&clks 23>; }; pci-iobg { @@ -616,12 +642,14 @@ compatible = "chipidea,ci13611a-prima2"; reg = <0xb8000000 0x10000>; interrupts = <10>; + clocks = <&clks 40>; }; usb1: usb@b00f0000 { compatible = "chipidea,ci13611a-prima2"; reg = <0xb8010000 0x10000>; interrupts = <11>; + clocks = <&clks 41>; }; sata@b00f0000 { @@ -634,6 +662,7 @@ compatible = "sirf,prima2-security"; reg = <0xb8030000 0x10000>; interrupts = <42>; + clocks = <&clks 7>; }; }; }; |