diff options
Diffstat (limited to 'arch/arc/Kconfig')
| -rw-r--r-- | arch/arc/Kconfig | 160 |
1 files changed, 128 insertions, 32 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index df94ac1f75b6..91cf4055acab 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -81,26 +81,47 @@ menu "ARC Architecture Configuration" menu "ARC Platform/SoC/Board" -source "arch/arc/plat-arcfpga/Kconfig" +source "arch/arc/plat-sim/Kconfig" source "arch/arc/plat-tb10x/Kconfig" +source "arch/arc/plat-axs10x/Kconfig" #New platform adds here endmenu +choice + prompt "ARC Instruction Set" + default ISA_ARCOMPACT + +config ISA_ARCOMPACT + bool "ARCompact ISA" + help + The original ARC ISA of ARC600/700 cores + +config ISA_ARCV2 + bool "ARC ISA v2" + help + ISA for the Next Generation ARC-HS cores + +endchoice + menu "ARC CPU Configuration" choice prompt "ARC Core" - default ARC_CPU_770 + default ARC_CPU_770 if ISA_ARCOMPACT + default ARC_CPU_HS if ISA_ARCV2 + +if ISA_ARCOMPACT config ARC_CPU_750D bool "ARC750D" + select ARC_CANT_LLSC help Support for ARC750 core config ARC_CPU_770 bool "ARC770" - select ARC_CPU_REL_4_10 + select ARC_HAS_SWAPE help Support for ARC770 core introduced with Rel 4.10 (Summer 2011) This core has a bunch of cool new features: @@ -109,6 +130,27 @@ config ARC_CPU_770 -Caches: New Prog Model, Region Flush -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr +endif #ISA_ARCOMPACT + +config ARC_CPU_HS + bool "ARC-HS" + depends on ISA_ARCV2 + help + Support for ARC HS38x Cores based on ARCv2 ISA + The notable features are: + - SMP configurations of upto 4 core with coherency + - Optional L2 Cache and IO-Coherency + - Revised Interrupt Architecture (multiple priorites, reg banks, + auto stack switch, auto regfile save/restore) + - MMUv4 (PIPT dcache, Huge Pages) + - Instructions for + * 64bit load/store: LDD, STD + * Hardware assisted divide/remainder: DIV, REM + * Function prologue/epilogue: ENTER_S, LEAVE_S + * IRQ enable/disable: CLRI, SETI + * pop count: FFS, FLS + * SETcc, BMSKN, XBFU... + endchoice config CPU_BIG_ENDIAN @@ -117,17 +159,13 @@ config CPU_BIG_ENDIAN help Build kernel for Big Endian Mode of ARC CPU -# If a platform can't work with 0x8000_0000 based dma_addr_t -config ARC_PLAT_NEEDS_CPU_TO_DMA - bool - config SMP - bool "Symmetric Multi-Processing (Incomplete)" + bool "Symmetric Multi-Processing" default n + select ARC_HAS_COH_CACHES if ISA_ARCV2 + select ARC_MCIP if ISA_ARCV2 help - This enables support for systems with more than one CPU. If you have - a system with only one CPU, say N. If you have a system with more - than one CPU, say Y. + This enables support for systems with more than one CPU. if SMP @@ -137,13 +175,20 @@ config ARC_HAS_COH_CACHES config ARC_HAS_REENTRANT_IRQ_LV2 def_bool n -endif +config ARC_MCIP + bool "ARConnect Multicore IP (MCIP) Support " + depends on ISA_ARCV2 + help + This IP block enables SMP in ARC-HS38 cores. + It provides for cross-core interrupts, multi-core debug + hardware semaphores, shared memory,.... config NR_CPUS int "Maximum number of CPUs (2-4096)" range 2 4096 - depends on SMP - default "2" + default "4" + +endif #SMP menuconfig ARC_CACHE bool "Enable Cache Support" @@ -185,7 +230,7 @@ config ARC_CACHE_PAGES config ARC_CACHE_VIPT_ALIASING bool "Support VIPT Aliasing D$" - depends on ARC_HAS_DCACHE + depends on ARC_HAS_DCACHE && ISA_ARCOMPACT default n endif #ARC_CACHE @@ -226,9 +271,10 @@ config ARC_HAS_HW_MPY Multipler. Otherwise software multipy lib is used choice - prompt "ARC700 MMU Version" + prompt "MMU Version" default ARC_MMU_V3 if ARC_CPU_770 default ARC_MMU_V2 if ARC_CPU_750D + default ARC_MMU_V4 if ARC_CPU_HS config ARC_MMU_V1 bool "MMU v1" @@ -249,6 +295,10 @@ config ARC_MMU_V3 Variable Page size (1k-16k), var JTLB size 128 x (2 or 4) Shared Address Spaces (SASID) +config ARC_MMU_V4 + bool "MMU v4" + depends on ISA_ARCV2 + endchoice @@ -271,6 +321,8 @@ config ARC_PAGE_SIZE_4K endchoice +if ISA_ARCOMPACT + config ARC_COMPACT_IRQ_LEVELS bool "ARCompact IRQ Priorities: High(2)/Low(1)" default n @@ -290,7 +342,7 @@ config ARC_IRQ5_LV2 config ARC_IRQ6_LV2 bool -endif +endif #ARC_COMPACT_IRQ_LEVELS config ARC_FPU_SAVE_RESTORE bool "Enable FPU state persistence across context switch" @@ -303,32 +355,53 @@ config ARC_FPU_SAVE_RESTORE based on actual usage of FPU by a task. Thus our implemn does this for all tasks in system. +endif #ISA_ARCOMPACT + config ARC_CANT_LLSC def_bool n -menuconfig ARC_CPU_REL_4_10 - bool "Enable support for Rel 4.10 features" - default n - help - -ARC770 (and dependent features) enabled - -ARC750 also shares some of the new features with 770 - config ARC_HAS_LLSC bool "Insn: LLOCK/SCOND (efficient atomic ops)" default y - depends on ARC_CPU_770 && !ARC_CANT_LLSC + depends on !ARC_CANT_LLSC config ARC_HAS_SWAPE bool "Insn: SWAPE (endian-swap)" default y - depends on ARC_CPU_REL_4_10 -config ARC_HAS_RTSC - bool "Insn: RTSC (64-bit r/o cycle counter)" +if ISA_ARCV2 + +config ARC_HAS_LL64 + bool "Insn: 64bit LDD/STD" + help + Enable gcc to generate 64-bit load/store instructions + ISA mandates even/odd registers to allow encoding of two + dest operands with 2 possible source operands. default y - depends on ARC_CPU_REL_4_10 + +config ARC_HAS_RTC + bool "Local 64-bit r/o cycle counter" + default n depends on !SMP +config ARC_HAS_GRTC + bool "SMP synchronized 64-bit cycle counter" + default y + depends on SMP + +config ARC_NUMBER_OF_INTERRUPTS + int "Number of interrupts" + range 8 240 + default 32 + help + This defines the number of interrupts on the ARCv2HS core. + It affects the size of vector table. + The initial 8 IRQs are fixed (Timer, ICI etc) and although configurable + in hardware, it keep things simple for Linux to assume they are always + present. + +endif # ISA_ARCV2 + endmenu # "ARC CPU Configuration" config LINUX_LINK_BASE @@ -354,8 +427,10 @@ config ARC_CURR_IN_REG config ARC_EMUL_UNALIGNED bool "Emulate unaligned memory access (userspace only)" + default N select SYSCTL_ARCH_UNALIGN_NO_WARN select SYSCTL_ARCH_UNALIGN_ALLOW + depends on ISA_ARCOMPACT help This enables misaligned 16 & 32 bit memory access from user space. Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide @@ -378,9 +453,10 @@ menuconfig ARC_DBG bool "ARC debugging" default y +if ARC_DBG + config ARC_DW2_UNWIND bool "Enable DWARF specific kernel stack unwind" - depends on ARC_DBG default y select KALLSYMS help @@ -394,18 +470,38 @@ config ARC_DW2_UNWIND config ARC_DBG_TLB_PARANOIA bool "Paranoia Checks in Low Level TLB Handlers" - depends on ARC_DBG default n config ARC_DBG_TLB_MISS_COUNT bool "Profile TLB Misses" default n select DEBUG_FS - depends on ARC_DBG help Counts number of I and D TLB Misses and exports them via Debugfs The counters can be cleared via Debugfs as well +if SMP + +config ARC_IPI_DBG + bool "Debug Inter Core interrupts" + default n + +endif + +endif + +config ARC_UBOOT_SUPPORT + bool "Support uboot arg Handling" + default n + help + ARC Linux by default checks for uboot provided args as pointers to + external cmdline or DTB. This however breaks in absence of uboot, + when booting from Metaware debugger directly, as the registers are + not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus + registers look like uboot args to kernel which then chokes. + So only enable the uboot arg checking/processing if users are sure + of uboot being in play. + config ARC_BUILTIN_DTB_NAME string "Built in DTB" help |