diff options
Diffstat (limited to 'Documentation')
1536 files changed, 29194 insertions, 21974 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot b/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot index 49ed9c8fd1e5..ed6b52ca210f 100644 --- a/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot +++ b/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot @@ -15,7 +15,7 @@ Description: actual protection), and Android and Linux distributions have been explicitly writing a "0" to /sys/fs/selinux/checkreqprot during initialization for some time. Support for setting checkreqprot to 1 - will be removed in a future kernel release, at which point the kernel + will be removed no sooner than June 2021, at which point the kernel will always cease using checkreqprot internally and will always check the actual protections being applied upon mmap/mprotect calls. The checkreqprot selinuxfs node will remain for backward compatibility diff --git a/Documentation/ABI/stable/sysfs-bus-mhi b/Documentation/ABI/stable/sysfs-bus-mhi new file mode 100644 index 000000000000..ecfe7662f8d0 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-bus-mhi @@ -0,0 +1,21 @@ +What: /sys/bus/mhi/devices/.../serialnumber +Date: Sept 2020 +KernelVersion: 5.10 +Contact: Bhaumik Bhatt <bbhatt@codeaurora.org> +Description: The file holds the serial number of the client device obtained + using a BHI (Boot Host Interface) register read after at least + one attempt to power up the device has been done. If read + without having the device power on at least once, the file will + read all 0's. +Users: Any userspace application or clients interested in device info. + +What: /sys/bus/mhi/devices/.../oem_pk_hash +Date: Sept 2020 +KernelVersion: 5.10 +Contact: Bhaumik Bhatt <bbhatt@codeaurora.org> +Description: The file holds the OEM PK Hash value of the endpoint device + obtained using a BHI (Boot Host Interface) register read after + at least one attempt to power up the device has been done. If + read without having the device power on at least once, the file + will read all 0's. +Users: Any userspace application or clients interested in device info. diff --git a/Documentation/ABI/stable/sysfs-class-infiniband b/Documentation/ABI/stable/sysfs-class-infiniband index 96dfe1926b76..87b11f91b425 100644 --- a/Documentation/ABI/stable/sysfs-class-infiniband +++ b/Documentation/ABI/stable/sysfs-class-infiniband @@ -258,23 +258,6 @@ Description: userspace ABI compatibility of umad & issm devices. -What: /sys/class/infiniband_cm/ucmN/ibdev -Date: Oct, 2005 -KernelVersion: v2.6.14 -Contact: linux-rdma@vger.kernel.org -Description: - (RO) Display Infiniband (IB) device name - - -What: /sys/class/infiniband_cm/abi_version -Date: Oct, 2005 -KernelVersion: v2.6.14 -Contact: linux-rdma@vger.kernel.org -Description: - (RO) Value is incremented if any changes are made that break - userspace ABI compatibility of ucm devices. - - What: /sys/class/infiniband_verbs/uverbsN/ibdev What: /sys/class/infiniband_verbs/uverbsN/abi_version Date: Sept, 2005 diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd index 1af9c4175213..b44183880935 100644 --- a/Documentation/ABI/stable/sysfs-driver-dma-idxd +++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd @@ -116,6 +116,12 @@ Description: The maximum number of bandwidth tokens that may be in use at one time by operations that access low bandwidth memory in the device. +What: /sys/bus/dsa/devices/dsa<m>/cmd_status +Date: Aug 28, 2020 +KernelVersion: 5.10.0 +Contact: dmaengine@vger.kernel.org +Description: The last executed device administrative command's status/error. + What: /sys/bus/dsa/devices/wq<m>.<n>/group_id Date: Oct 25, 2019 KernelVersion: 5.6.0 @@ -170,6 +176,20 @@ Contact: dmaengine@vger.kernel.org Description: The number of entries in this work queue that may be filled via a limited portal. +What: /sys/bus/dsa/devices/wq<m>.<n>/max_transfer_size +Date: Aug 28, 2020 +KernelVersion: 5.10.0 +Contact: dmaengine@vger.kernel.org +Description: The max transfer sized for this workqueue. Cannot exceed device + max transfer size. Configurable parameter. + +What: /sys/bus/dsa/devices/wq<m>.<n>/max_batch_size +Date: Aug 28, 2020 +KernelVersion: 5.10.0 +Contact: dmaengine@vger.kernel.org +Description: The max batch size for this workqueue. Cannot exceed device + max batch size. Configurable parameter. + What: /sys/bus/dsa/devices/engine<m>.<n>/group_id Date: Oct 25, 2019 KernelVersion: 5.6.0 diff --git a/Documentation/ABI/stable/sysfs-kernel-notes b/Documentation/ABI/stable/sysfs-kernel-notes new file mode 100644 index 000000000000..2c76ee9e67f7 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-kernel-notes @@ -0,0 +1,5 @@ +What: /sys/kernel/notes +Date: July 2009 +Contact: <linux-kernel@vger.kernel.org> +Description: The /sys/kernel/notes file contains the binary representation + of the running vmlinux's .notes section. diff --git a/Documentation/ABI/testing/sysfs-bus-dfl b/Documentation/ABI/testing/sysfs-bus-dfl new file mode 100644 index 000000000000..23543be904f2 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-dfl @@ -0,0 +1,15 @@ +What: /sys/bus/dfl/devices/dfl_dev.X/type +Date: Aug 2020 +KernelVersion: 5.10 +Contact: Xu Yilun <yilun.xu@intel.com> +Description: Read-only. It returns type of DFL FIU of the device. Now DFL + supports 2 FIU types, 0 for FME, 1 for PORT. + Format: 0x%x + +What: /sys/bus/dfl/devices/dfl_dev.X/feature_id +Date: Aug 2020 +KernelVersion: 5.10 +Contact: Xu Yilun <yilun.xu@intel.com> +Description: Read-only. It returns feature identifier local to its DFL FIU + type. + Format: 0x%x diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 index e82fc37be802..2273627df190 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 @@ -1,3 +1,28 @@ +What: /sys/bus/event_source/devices/hv_24x7/format +Date: September 2020 +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> +Description: Read-only. Attribute group to describe the magic bits + that go into perf_event_attr.config for a particular pmu. + (See ABI/testing/sysfs-bus-event_source-devices-format). + + Each attribute under this group defines a bit range of the + perf_event_attr.config. All supported attributes are listed + below. + + chip = "config:16-31" + core = "config:16-31" + domain = "config:0-3" + lpar = "config:0-15" + offset = "config:32-63" + vcpu = "config:16-31" + + For example, + + PM_PB_CYC = "domain=1,offset=0x80,chip=?,lpar=0x0" + + In this event, '?' after chip specifies that + this value will be provided by user while running this event. + What: /sys/bus/event_source/devices/hv_24x7/interface/catalog Date: February 2014 Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci index 3ca4e554d2f9..6a023b42486c 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci @@ -1,3 +1,34 @@ +What: /sys/bus/event_source/devices/hv_gpci/format +Date: September 2020 +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> +Description: Read-only. Attribute group to describe the magic bits + that go into perf_event_attr.config for a particular pmu. + (See ABI/testing/sysfs-bus-event_source-devices-format). + + Each attribute under this group defines a bit range of the + perf_event_attr.config. All supported attributes are listed + below. + + counter_info_version = "config:16-23" + length = "config:24-31" + partition_id = "config:32-63" + request = "config:0-31" + sibling_part_id = "config:32-63" + hw_chip_id = "config:32-63" + offset = "config:32-63" + phys_processor_idx = "config:32-63" + secondary_index = "config:0-15" + starting_index = "config:32-63" + + For example, + + processor_core_utilization_instructions_completed = "request=0x94, + phys_processor_idx=?,counter_info_version=0x8, + length=8,offset=0x18" + + In this event, '?' after phys_processor_idx specifies this value + this value will be provided by user while running this event. + What: /sys/bus/event_source/devices/hv_gpci/interface/collect_privileged Date: February 2014 Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> @@ -41,3 +72,10 @@ Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: A number indicating the latest version of the gpci interface that the kernel is aware of. + +What: /sys/devices/hv_gpci/cpumask +Date: October 2020 +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> +Description: read only + This sysfs file exposes the cpumask which is designated to make + HCALLs to retrieve hv-gpci pmu event counter data. diff --git a/Documentation/ABI/testing/sysfs-bus-fsi b/Documentation/ABI/testing/sysfs-bus-fsi index 320697bdf41d..d148214181a1 100644 --- a/Documentation/ABI/testing/sysfs-bus-fsi +++ b/Documentation/ABI/testing/sysfs-bus-fsi @@ -36,3 +36,11 @@ Contact: linux-fsi@lists.ozlabs.org Description: Provides a means of reading/writing a 32 bit value from/to a specified FSI bus address. + +What: /sys/bus/platform/devices/../cfam_reset +Date: Sept 2020 +KernelVersion: 5.10 +Contact: linux-fsi@lists.ozlabs.org +Description: + Provides a means of resetting the cfam that is attached to the + FSI device. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 5c62bfb0f3f5..a9d51810a3ba 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -40,6 +40,7 @@ Description: buffered samples and events for device X. What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency What: /sys/bus/iio/devices/triggerX/sampling_frequency KernelVersion: 2.6.35 @@ -49,12 +50,13 @@ Description: resulting sampling frequency. In many devices this parameter has an effect on input filters etc. rather than simply controlling when the input is sampled. As this - effects data ready triggers, hardware buffers and the sysfs + affects data ready triggers, hardware buffers and the sysfs direct access interfaces, it may be found in any of the - relevant directories. If it effects all of the above + relevant directories. If it affects all of the above then it is to be found in the base device directory. What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available What: /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available What: /sys/.../iio:deviceX/buffer/sampling_frequency_available What: /sys/bus/iio/devices/triggerX/sampling_frequency_available @@ -374,6 +376,9 @@ What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: @@ -401,21 +406,21 @@ Description: Hardware applied calibration offset (assumed to fix production inaccuracies). -What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale -what /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale -what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale @@ -483,7 +488,8 @@ Description: If a discrete set of scale values is available, they are listed in this attribute. -What /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain @@ -494,6 +500,13 @@ Description: Hardware applied gain factor. If shared across all channels, <type>_hardwaregain is used. +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available +KernelVersion: 5.10 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available hardware applied gain factors. Shared across all + channels. + What: /sys/.../in_accel_filter_low_pass_3db_frequency What: /sys/.../in_magn_filter_low_pass_3db_frequency What: /sys/.../in_anglvel_filter_low_pass_3db_frequency @@ -750,9 +763,9 @@ What: /sys/.../events/in_voltageY_raw_thresh_falling_value What: /sys/.../events/in_tempY_raw_thresh_rising_value What: /sys/.../events/in_tempY_raw_thresh_falling_value What: /sys/.../events/in_illuminance0_thresh_falling_value -what: /sys/.../events/in_illuminance0_thresh_rising_value -what: /sys/.../events/in_proximity0_thresh_falling_value -what: /sys/.../events/in_proximity0_thresh_rising_value +What: /sys/.../events/in_illuminance0_thresh_rising_value +What: /sys/.../events/in_proximity0_thresh_falling_value +What: /sys/.../events/in_proximity0_thresh_rising_value What: /sys/.../events/in_illuminance_thresh_rising_value What: /sys/.../events/in_illuminance_thresh_falling_value KernelVersion: 2.6.37 @@ -832,11 +845,11 @@ What: /sys/.../events/in_tempY_thresh_rising_hysteresis What: /sys/.../events/in_tempY_thresh_falling_hysteresis What: /sys/.../events/in_tempY_thresh_either_hysteresis What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis -what: /sys/.../events/in_illuminance0_thresh_rising_hysteresis -what: /sys/.../events/in_illuminance0_thresh_either_hysteresis -what: /sys/.../events/in_proximity0_thresh_falling_hysteresis -what: /sys/.../events/in_proximity0_thresh_rising_hysteresis -what: /sys/.../events/in_proximity0_thresh_either_hysteresis +What: /sys/.../events/in_illuminance0_thresh_rising_hysteresis +What: /sys/.../events/in_illuminance0_thresh_either_hysteresis +What: /sys/.../events/in_proximity0_thresh_falling_hysteresis +What: /sys/.../events/in_proximity0_thresh_rising_hysteresis +What: /sys/.../events/in_proximity0_thresh_either_hysteresis KernelVersion: 3.13 Contact: linux-iio@vger.kernel.org Description: @@ -1013,7 +1026,7 @@ What: /sys/.../events/in_activity_running_thresh_falling_en KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: - Enables or disables activitity events. Depending on direction + Enables or disables activity events. Depending on direction an event is generated when sensor ENTERS or LEAVES a given state. What: /sys/.../events/in_activity_still_thresh_rising_value @@ -1333,6 +1346,7 @@ Description: standardised CIE Erythemal Action Spectrum. UV index values range from 0 (low) to >=11 (extreme). +What: /sys/.../iio:deviceX/in_intensity_integration_time What: /sys/.../iio:deviceX/in_intensity_red_integration_time What: /sys/.../iio:deviceX/in_intensity_green_integration_time What: /sys/.../iio:deviceX/in_intensity_blue_integration_time @@ -1342,7 +1356,8 @@ KernelVersion: 3.12 Contact: linux-iio@vger.kernel.org Description: This attribute is used to get/set the integration time in - seconds. + seconds. If shared across all channels of a given type, + <type>_integration_time is used. What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time KernelVersion: 4.0 @@ -1564,6 +1579,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_ethanol_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_h2_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentration_o2_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_o2_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw KernelVersion: 4.3 @@ -1740,3 +1757,20 @@ KernelVersion: 5.5 Contact: linux-iio@vger.kernel.org Description: One of the following thermocouple types: B, E, J, K, N, R, S, T. + +What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibambient +What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibambient +KernelVersion: 5.10 +Contact: linux-iio@vger.kernel.org +Description: + Calibrated ambient temperature for object temperature + calculation in milli degrees Celsius. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw +KernelVersion: 5.10 +Contact: linux-iio@vger.kernel.org +Description: + Unscaled light intensity according to CIE 1931/DIN 5033 color space. + Units after application of scale are nano nanowatts per square meter. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 new file mode 100644 index 000000000000..47e34f865ca1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 @@ -0,0 +1,7 @@ +What: /sys/bus/iio/devices/triggerX/name = "adxl372-devX-peak" +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + The adxl372 accelerometer kernel module provides an additional trigger, + which sets the device in a mode in which it will record only the peak acceleration + sensed over the set period of time in the events sysfs. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 b/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 new file mode 100644 index 000000000000..5b78af5f341d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 @@ -0,0 +1,9 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw +What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available +KernelVersion: 5.3.8 +Contact: linux-iio@vger.kernel.org +Description: + Controls the heater device within the humidity sensor to get + rid of excess condensation. + + Valid control values are 0 = OFF, and 1 = ON. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2772 b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2772 new file mode 100644 index 000000000000..b2798b258bf7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2772 @@ -0,0 +1,13 @@ +What: /sys/bus/iio/devices/device[n]/in_illuminance0_calibrate +KernelVersion: 3.3-rc1 +Contact: linux-iio@vger.kernel.org +Description: + Causes an internal calibration of the als gain trim + value which is later used in calculating illuminance in lux. + +What: /sys/bus/iio/devices/device[n]/in_proximity0_calibrate +KernelVersion: 3.3-rc1 +Contact: linux-iio@vger.kernel.org +Description: + Causes a recalculation and adjustment to the + proximity_thresh_rising_value. diff --git a/Documentation/ABI/testing/sysfs-bus-mei b/Documentation/ABI/testing/sysfs-bus-mei index 3d37e2796d5a..6e9a105fe5cb 100644 --- a/Documentation/ABI/testing/sysfs-bus-mei +++ b/Documentation/ABI/testing/sysfs-bus-mei @@ -41,6 +41,13 @@ Contact: Tomas Winkler <tomas.winkler@intel.com> Description: Stores mei client fixed address, if any Format: %d +What: /sys/bus/mei/devices/.../vtag +Date: Nov 2020 +KernelVersion: 5.9 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Stores mei client vtag support status + Format: %d + What: /sys/bus/mei/devices/.../max_len Date: Nov 2019 KernelVersion: 5.5 diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt b/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt new file mode 100644 index 000000000000..8a200f4eefbd --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt @@ -0,0 +1,16 @@ +What: /sys/devices/pci0000:00/<dev>/fw_version +Date: September 2020 +Contact: Cezary Rojewski <cezary.rojewski@intel.com> +Description: + Version of AudioDSP firmware ASoC catpt driver is + communicating with. + Format: %d.%d.%d.%d, type:major:minor:build. + +What: /sys/devices/pci0000:00/<dev>/fw_info +Date: September 2020 +Contact: Cezary Rojewski <cezary.rojewski@intel.com> +Description: + Detailed AudioDSP firmware build information including + build hash and log-providers hash. This information is + obtained during initial handshake with firmware. + Format: %s. diff --git a/Documentation/ABI/testing/sysfs-bus-soundwire-slave b/Documentation/ABI/testing/sysfs-bus-soundwire-slave index db4c9511d1aa..d324aa0b678f 100644 --- a/Documentation/ABI/testing/sysfs-bus-soundwire-slave +++ b/Documentation/ABI/testing/sysfs-bus-soundwire-slave @@ -1,3 +1,21 @@ +What: /sys/bus/soundwire/devices/sdw:.../status + /sys/bus/soundwire/devices/sdw:.../device_number + +Date: September 2020 + +Contact: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> + Bard Liao <yung-chuan.liao@linux.intel.com> + Vinod Koul <vkoul@kernel.org> + +Description: SoundWire Slave status + + These properties report the Slave status, e.g. if it + is UNATTACHED or not, and in the latter case show the + device_number. This status information is useful to + detect devices exposed by platform firmware but not + physically present on the bus, and conversely devices + not exposed in platform firmware but enumerated. + What: /sys/bus/soundwire/devices/sdw:.../dev-properties/mipi_revision /sys/bus/soundwire/devices/sdw:.../dev-properties/wake_capable /sys/bus/soundwire/devices/sdw:.../dev-properties/test_mode_capable diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index 40213c73bc9c..dbccb2fcd7ce 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -34,7 +34,7 @@ Description: Describes the main type of the supply. Access: Read - Valid values: "Battery", "UPS", "Mains", "USB" + Valid values: "Battery", "UPS", "Mains", "USB", "Wireless" ===== Battery Properties ===== @@ -108,7 +108,8 @@ Description: which they average readings to smooth out the reported value. Access: Read - Valid values: Represented in microamps + Valid values: Represented in microamps. Negative values are used + for discharging batteries, positive values for charging batteries. What: /sys/class/power_supply/<supply_name>/current_max Date: October 2010 @@ -127,7 +128,8 @@ Description: This value is not averaged/smoothed. Access: Read - Valid values: Represented in microamps + Valid values: Represented in microamps. Negative values are used + for discharging batteries, positive values for charging batteries. What: /sys/class/power_supply/<supply_name>/charge_control_limit Date: Oct 2012 diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc index 36094fbeb974..066b9b6f4924 100644 --- a/Documentation/ABI/testing/sysfs-class-remoteproc +++ b/Documentation/ABI/testing/sysfs-class-remoteproc @@ -58,3 +58,47 @@ Description: Remote processor name Reports the name of the remote processor. This can be used by userspace in exactly identifying a remote processor and ease up the usage in modifying the 'firmware' or 'state' files. + +What: /sys/class/remoteproc/.../coredump +Date: July 2020 +Contact: Bjorn Andersson <bjorn.andersson@linaro.org>, Ohad Ben-Cohen <ohad@wizery.com> +Description: Remote processor coredump configuration + + Reports the coredump configuration of the remote processor, + which will be one of: + + "disabled" + "enabled" + "inline" + + "disabled" means no dump will be collected. + + "enabled" means when the remote processor's coredump is + collected it will be copied to a separate buffer and that + buffer is exposed to userspace. + + "inline" means when the remote processor's coredump is + collected userspace will directly read from the remote + processor's device memory. Extra buffer will not be used to + copy the dump. Also recovery process will not proceed until + all data is read by usersapce. + +What: /sys/class/remoteproc/.../recovery +Date: July 2020 +Contact: Bjorn Andersson <bjorn.andersson@linaro.org>, Ohad Ben-Cohen <ohad@wizery.com> +Description: Remote processor recovery mechanism + + Reports the recovery mechanism of the remote processor, + which will be one of: + + "enabled" + "disabled" + + "enabled" means, the remote processor will be automatically + recovered whenever it crashes. Moreover, if the remote + processor crashes while recovery is disabled, it will + be automatically recovered too as soon as recovery is enabled. + + "disabled" means, a remote processor will remain in a crashed + state if it crashes. This is useful for debugging purposes; + without it, debugging a crash is substantially harder. diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs index 1a14bf9b22ba..169ae4b2a180 100644 --- a/Documentation/ABI/testing/sysfs-driver-habanalabs +++ b/Documentation/ABI/testing/sysfs-driver-habanalabs @@ -2,13 +2,17 @@ What: /sys/class/habanalabs/hl<n>/armcp_kernel_ver Date: Jan 2019 KernelVersion: 5.1 Contact: oded.gabbay@gmail.com -Description: Version of the Linux kernel running on the device's CPU +Description: Version of the Linux kernel running on the device's CPU. + Will be DEPRECATED in Linux kernel version 5.10, and be + replaced with cpucp_kernel_ver What: /sys/class/habanalabs/hl<n>/armcp_ver Date: Jan 2019 KernelVersion: 5.1 Contact: oded.gabbay@gmail.com Description: Version of the application running on the device's CPU + Will be DEPRECATED in Linux kernel version 5.10, and be + replaced with cpucp_ver What: /sys/class/habanalabs/hl<n>/clk_max_freq_mhz Date: Jun 2019 @@ -33,6 +37,18 @@ KernelVersion: 5.1 Contact: oded.gabbay@gmail.com Description: Version of the Device's CPLD F/W +What: /sys/class/habanalabs/hl<n>/cpucp_kernel_ver +Date: Oct 2020 +KernelVersion: 5.10 +Contact: oded.gabbay@gmail.com +Description: Version of the Linux kernel running on the device's CPU + +What: /sys/class/habanalabs/hl<n>/cpucp_ver +Date: Oct 2020 +KernelVersion: 5.10 +Contact: oded.gabbay@gmail.com +Description: Version of the application running on the device's CPU + What: /sys/class/habanalabs/hl<n>/device_type Date: Jan 2019 KernelVersion: 5.1 diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc new file mode 100644 index 000000000000..979a2d62513f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc @@ -0,0 +1,15 @@ +What: /sys/bus/spi/devices/.../bmc_version +Date: June 2020 +KernelVersion: 5.10 +Contact: Xu Yilun <yilun.xu@intel.com> +Description: Read only. Returns the hardware build version of Intel + MAX10 BMC chip. + Format: "0x%x". + +What: /sys/bus/spi/devices/.../bmcfw_version +Date: June 2020 +KernelVersion: 5.10 +Contact: Xu Yilun <yilun.xu@intel.com> +Description: Read only. Returns the firmware version of Intel MAX10 + BMC chip. + Format: "0x%x". diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm index 9b488c0afdfa..8873bbb075cb 100644 --- a/Documentation/ABI/testing/sysfs-driver-w1_therm +++ b/Documentation/ABI/testing/sysfs-driver-w1_therm @@ -49,10 +49,13 @@ Description: will be changed only in device RAM, so it will be cleared when power is lost. Trigger a 'save' to EEPROM command to keep values after power-on. Read or write are : - * '9..12': device resolution in bit + * '9..14': device resolution in bit or resolution to set in bit * '-xx': xx is kernel error when reading the resolution * Anything else: do nothing + Some DS18B20 clones are fixed in 12-bit resolution, so the + actual resolution is read back from the chip and verified. Error + is reported if the results differ. Users: any user space application which wants to communicate with w1_term device @@ -86,7 +89,7 @@ Description: *write* : * '0' : save the 2 or 3 bytes to the device EEPROM (i.e. TH, TL and config register) - * '9..12' : set the device resolution in RAM + * '9..14' : set the device resolution in RAM (if supported) * Anything else: do nothing refer to Documentation/w1/slaves/w1_therm.rst for detailed @@ -114,3 +117,47 @@ Description: of the bulk read command (not the current temperature). Users: any user space application which wants to communicate with w1_term device + + +What: /sys/bus/w1/devices/.../conv_time +Date: July 2020 +Contact: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> +Description: + (RW) Get, set, or measure a temperature conversion time. The + setting remains active until a resolution change. Then it is + reset to default (datasheet) conversion time for a new + resolution. + + *read*: Actual conversion time in milliseconds. *write*: + '0': Set the default conversion time from the datasheet. + '1': Measure and set the conversion time. Make a single + temperature conversion, measure an actual value. + Increase it by 20% for temperature range. A new + conversion time can be obtained by reading this + same attribute. + other positive value: + Set the conversion time in milliseconds. + +Users: An application using the w1_term device + + +What: /sys/bus/w1/devices/.../features +Date: July 2020 +Contact: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> +Description: + (RW) Control optional driver settings. + Bit masks to read/write (bitwise OR): + + 1: Enable check for conversion success. If byte 6 of + scratchpad memory is 0xC after conversion, and + temperature reads 85.00 (powerup value) or 127.94 + (insufficient power) - return a conversion error. + + 2: Enable poll for conversion completion. Generate read cycles + after the conversion start and wait for 1's. In parasite + power mode this feature is not available. + + *read*: Currently selected features. + *write*: Select features. + +Users: An application using the w1_term device diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 7f730c4c8df2..834d0becae6d 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -22,7 +22,8 @@ Contact: "Namjae Jeon" <namjae.jeon@samsung.com> Description: Controls the victim selection policy for garbage collection. Setting gc_idle = 0(default) will disable this option. Setting gc_idle = 1 will select the Cost Benefit approach & setting - gc_idle = 2 will select the greedy approach. + gc_idle = 2 will select the greedy approach & setting + gc_idle = 3 will select the age-threshold based approach. What: /sys/fs/f2fs/<disk>/reclaim_segments Date: October 2013 diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf index eeed81ca6949..2cbc660d163b 100644 --- a/Documentation/ABI/testing/sysfs-platform-dptf +++ b/Documentation/ABI/testing/sysfs-platform-dptf @@ -92,3 +92,19 @@ Contact: linux-acpi@vger.kernel.org Description: (RO) The battery discharge current capability obtained from battery fuel gauge in milli Amps. + +What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_low_clock +Date: November, 2020 +KernelVersion: v5.10 +Contact: linux-acpi@vger.kernel.org +Description: + (RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz, + when FIVR clock is 19.2MHz or 24MHz. + +What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_high_clock +Date: November, 2020 +KernelVersion: v5.10 +Contact: linux-acpi@vger.kernel.org +Description: + (RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz, + when FIVR clock is 38.4MHz. diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst index 8f66feaafd4f..c17c87af1968 100644 --- a/Documentation/PCI/index.rst +++ b/Documentation/PCI/index.rst @@ -12,6 +12,7 @@ Linux PCI Bus Subsystem pciebus-howto pci-iov-howto msi-howto + sysfs-pci acpi-info pci-error-recovery pcieaer-howto diff --git a/Documentation/filesystems/sysfs-pci.rst b/Documentation/PCI/sysfs-pci.rst index 742fbd21dc1f..742fbd21dc1f 100644 --- a/Documentation/filesystems/sysfs-pci.rst +++ b/Documentation/PCI/sysfs-pci.rst diff --git a/Documentation/RCU/Design/Data-Structures/Data-Structures.rst b/Documentation/RCU/Design/Data-Structures/Data-Structures.rst index 4a48e20a46f2..f4efd6897b09 100644 --- a/Documentation/RCU/Design/Data-Structures/Data-Structures.rst +++ b/Documentation/RCU/Design/Data-Structures/Data-Structures.rst @@ -963,7 +963,7 @@ exit and perhaps also vice versa. Therefore, whenever the ``->dynticks_nesting`` field is incremented up from zero, the ``->dynticks_nmi_nesting`` field is set to a large positive number, and whenever the ``->dynticks_nesting`` field is decremented down to zero, -the the ``->dynticks_nmi_nesting`` field is set to zero. Assuming that +the ``->dynticks_nmi_nesting`` field is set to zero. Assuming that the number of misnested interrupts is not sufficient to overflow the counter, this approach corrects the ``->dynticks_nmi_nesting`` field every time the corresponding CPU enters the idle loop from process diff --git a/Documentation/RCU/Design/Requirements/Requirements.rst b/Documentation/RCU/Design/Requirements/Requirements.rst index 8f41ad0aa753..1ae79a10a8de 100644 --- a/Documentation/RCU/Design/Requirements/Requirements.rst +++ b/Documentation/RCU/Design/Requirements/Requirements.rst @@ -2162,7 +2162,7 @@ scheduling-clock interrupt be enabled when RCU needs it to be: this sort of thing. #. If a CPU is in a portion of the kernel that is absolutely positively no-joking guaranteed to never execute any RCU read-side critical - sections, and RCU believes this CPU to to be idle, no problem. This + sections, and RCU believes this CPU to be idle, no problem. This sort of thing is used by some architectures for light-weight exception handlers, which can then avoid the overhead of ``rcu_irq_enter()`` and ``rcu_irq_exit()`` at exception entry and @@ -2431,7 +2431,7 @@ However, there are legitimate preemptible-RCU implementations that do not have this property, given that any point in the code outside of an RCU read-side critical section can be a quiescent state. Therefore, *RCU-sched* was created, which follows “classic†RCU in that an -RCU-sched grace period waits for for pre-existing interrupt and NMI +RCU-sched grace period waits for pre-existing interrupt and NMI handlers. In kernels built with ``CONFIG_PREEMPT=n``, the RCU and RCU-sched APIs have identical implementations, while kernels built with ``CONFIG_PREEMPT=y`` provide a separate implementation for each. diff --git a/Documentation/RCU/lockdep.rst b/Documentation/RCU/lockdep.rst index f1fc8ae3846a..cc860a0c296b 100644 --- a/Documentation/RCU/lockdep.rst +++ b/Documentation/RCU/lockdep.rst @@ -49,7 +49,7 @@ checking of rcu_dereference() primitives: is invoked by both RCU-sched readers and updaters. srcu_dereference_check(p, c): Use explicit check expression "c" along with - srcu_read_lock_held()(). This is useful in code that + srcu_read_lock_held(). This is useful in code that is invoked by both SRCU readers and updaters. rcu_dereference_raw(p): Don't check. (Use sparingly, if at all.) diff --git a/Documentation/RCU/whatisRCU.rst b/Documentation/RCU/whatisRCU.rst index c7f147b8034f..fb3ff76c3e73 100644 --- a/Documentation/RCU/whatisRCU.rst +++ b/Documentation/RCU/whatisRCU.rst @@ -360,7 +360,7 @@ order to amortize their overhead over many uses of the corresponding APIs. There are at least three flavors of RCU usage in the Linux kernel. The diagram above shows the most common one. On the updater side, the rcu_assign_pointer(), -sychronize_rcu() and call_rcu() primitives used are the same for all three +synchronize_rcu() and call_rcu() primitives used are the same for all three flavors. However for protection (on the reader side), the primitives used vary depending on the flavor: diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst index 5aad534233cd..95a28f47ac30 100644 --- a/Documentation/admin-guide/README.rst +++ b/Documentation/admin-guide/README.rst @@ -322,9 +322,9 @@ Compiling the kernel reboot, and enjoy! If you ever need to change the default root device, video mode, - ramdisk size, etc. in the kernel image, use the ``rdev`` program (or - alternatively the LILO boot options when appropriate). No need to - recompile the kernel to change these parameters. + etc. in the kernel image, use your bootloader's boot options + where appropriate. No need to recompile the kernel to change + these parameters. - Reboot with the new kernel and enjoy. diff --git a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst index 1eccf952876d..8d3a2d045c0a 100644 --- a/Documentation/admin-guide/bcache.rst +++ b/Documentation/admin-guide/bcache.rst @@ -5,11 +5,14 @@ A block layer cache (bcache) Say you've got a big slow raid 6, and an ssd or three. Wouldn't it be nice if you could use them as cache... Hence bcache. -Wiki and git repositories are at: +The bcache wiki can be found at: + https://bcache.evilpiepirate.org - - https://bcache.evilpiepirate.org - - http://evilpiepirate.org/git/linux-bcache.git - - https://evilpiepirate.org/git/bcache-tools.git +This is the git repository of bcache-tools: + https://git.kernel.org/pub/scm/linux/kernel/git/colyli/bcache-tools.git/ + +The latest bcache kernel code can be found from mainline Linux kernel: + https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/ It's designed around the performance characteristics of SSDs - it only allocates in erase block sized buckets, and it uses a hybrid btree/log to track cached @@ -41,17 +44,21 @@ in the cache it first disables writeback caching and waits for all dirty data to be flushed. Getting started: -You'll need make-bcache from the bcache-tools repository. Both the cache device +You'll need bcache util from the bcache-tools repository. Both the cache device and backing device must be formatted before use:: - make-bcache -B /dev/sdb - make-bcache -C /dev/sdc + bcache make -B /dev/sdb + bcache make -C /dev/sdc -make-bcache has the ability to format multiple devices at the same time - if +`bcache make` has the ability to format multiple devices at the same time - if you format your backing devices and cache device at the same time, you won't have to manually attach:: - make-bcache -B /dev/sda /dev/sdb -C /dev/sdc + bcache make -B /dev/sda /dev/sdb -C /dev/sdc + +If your bcache-tools is not updated to latest version and does not have the +unified `bcache` utility, you may use the legacy `make-bcache` utility to format +bcache device with same -B and -C parameters. bcache-tools now ships udev rules, and bcache devices are known to the kernel immediately. Without udev, you can manually register devices like this:: @@ -188,7 +195,7 @@ D) Recovering data without bcache: If bcache is not available in the kernel, a filesystem on the backing device is still available at an 8KiB offset. So either via a loopdev of the backing device created with --offset 8K, or any value defined by ---data-offset when you originally formatted bcache with `make-bcache`. +--data-offset when you originally formatted bcache with `bcache make`. For example:: @@ -210,7 +217,7 @@ E) Wiping a cache device After you boot back with bcache enabled, you recreate the cache and attach it:: - host:~# make-bcache -C /dev/sdh2 + host:~# bcache make -C /dev/sdh2 UUID: 7be7e175-8f4c-4f99-94b2-9c904d227045 Set UUID: 5bc072a8-ab17-446d-9744-e247949913c1 version: 0 @@ -318,7 +325,7 @@ want for getting the best possible numbers when benchmarking. The default metadata size in bcache is 8k. If your backing device is RAID based, then be sure to align this by a multiple of your stride - width using `make-bcache --data-offset`. If you intend to expand your + width using `bcache make --data-offset`. If you intend to expand your disk array in the future, then multiply a series of primes by your raid stripe size to get the disk multiples that you would like. diff --git a/Documentation/admin-guide/blockdev/ramdisk.rst b/Documentation/admin-guide/blockdev/ramdisk.rst index b7c2268f8dec..9ce6101e8dd9 100644 --- a/Documentation/admin-guide/blockdev/ramdisk.rst +++ b/Documentation/admin-guide/blockdev/ramdisk.rst @@ -6,7 +6,7 @@ Using the RAM disk block device with Linux 1) Overview 2) Kernel Command Line Parameters - 3) Using "rdev -r" + 3) Using "rdev" 4) An Example of Creating a Compressed RAM Disk @@ -59,51 +59,27 @@ default is 4096 (4 MB). rd_size See ramdisk_size. -3) Using "rdev -r" ------------------- +3) Using "rdev" +--------------- -The usage of the word (two bytes) that "rdev -r" sets in the kernel image is -as follows. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up -to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit -14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a -prompt/wait sequence is to be given before trying to read the RAM disk. Since -the RAM disk dynamically grows as data is being written into it, a size field -is not required. Bits 11 to 13 are not currently used and may as well be zero. -These numbers are no magical secrets, as seen below:: +"rdev" is an obsolete, deprecated, antiquated utility that could be used +to set the boot device in a Linux kernel image. - ./arch/x86/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF - ./arch/x86/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000 - ./arch/x86/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000 +Instead of using rdev, just place the boot device information on the +kernel command line and pass it to the kernel from the bootloader. -Consider a typical two floppy disk setup, where you will have the -kernel on disk one, and have already put a RAM disk image onto disk #2. +You can also pass arguments to the kernel by setting FDARGS in +arch/x86/boot/Makefile and specify in initrd image by setting FDINITRD in +arch/x86/boot/Makefile. -Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk -starts at an offset of 0 kB from the beginning of the floppy. -The command line equivalent is: "ramdisk_start=0" +Some of the kernel command line boot options that may apply here are:: -You want bit 14 as one, indicating that a RAM disk is to be loaded. -The command line equivalent is: "load_ramdisk=1" - -You want bit 15 as one, indicating that you want a prompt/keypress -sequence so that you have a chance to switch floppy disks. -The command line equivalent is: "prompt_ramdisk=1" - -Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word. -So to create disk one of the set, you would do:: - - /usr/src/linux# cat arch/x86/boot/zImage > /dev/fd0 - /usr/src/linux# rdev /dev/fd0 /dev/fd0 - /usr/src/linux# rdev -r /dev/fd0 49152 + ramdisk_start=N + ramdisk_size=M If you make a boot disk that has LILO, then for the above, you would use:: - append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1" - -Since the default start = 0 and the default prompt = 1, you could use:: - - append = "load_ramdisk=1" - + append = "ramdisk_start=N ramdisk_size=M" 4) An Example of Creating a Compressed RAM Disk ----------------------------------------------- @@ -151,12 +127,9 @@ f) Put the RAM disk image onto the floppy, after the kernel. Use an offset dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400 -g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc. - For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would - have 2^15 + 2^14 + 400 = 49552:: - - rdev /dev/fd0 /dev/fd0 - rdev -r /dev/fd0 49552 +g) Make sure that you have already specified the boot information in + FDARGS and FDINITRD or that you use a bootloader to pass kernel + command line boot options to the kernel. That is it. You now have your boot/root compressed RAM disk floppy. Some users may wish to combine steps (d) and (f) by using a pipe. @@ -167,11 +140,14 @@ users may wish to combine steps (d) and (f) by using a pipe. Changelog: ---------- +SEPT-2020 : + + Removed usage of "rdev" + 10-22-04 : Updated to reflect changes in command line options, remove obsolete references, general cleanup. James Nelson (james4765@gmail.com) - 12-95 : Original Document diff --git a/Documentation/admin-guide/cgroup-v1/cpusets.rst b/Documentation/admin-guide/cgroup-v1/cpusets.rst index 7ade3abd342a..5d844ed4df69 100644 --- a/Documentation/admin-guide/cgroup-v1/cpusets.rst +++ b/Documentation/admin-guide/cgroup-v1/cpusets.rst @@ -1,3 +1,5 @@ +.. _cpusets: + ======= CPUSETS ======= diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 6be43781ec7f..608d7c279396 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -1259,6 +1259,10 @@ PAGE_SIZE multiple when read back. can show up in the middle. Don't rely on items remaining in a fixed position; use the keys to look up specific values! + If the entry has no per-node counter(or not show in the + mempry.numa_stat). We use 'npn'(non-per-node) as the tag + to indicate that it will not show in the mempry.numa_stat. + anon Amount of memory used in anonymous mappings such as brk(), sbrk(), and mmap(MAP_ANONYMOUS) @@ -1270,15 +1274,11 @@ PAGE_SIZE multiple when read back. kernel_stack Amount of memory allocated to kernel stacks. - slab - Amount of memory used for storing in-kernel data - structures. - - percpu + percpu(npn) Amount of memory used for storing per-cpu kernel data structures. - sock + sock(npn) Amount of memory used in network transmission buffers shmem @@ -1318,56 +1318,96 @@ PAGE_SIZE multiple when read back. Part of "slab" that cannot be reclaimed on memory pressure. - pgfault - Total number of page faults incurred + slab(npn) + Amount of memory used for storing in-kernel data + structures. - pgmajfault - Number of major page faults incurred + workingset_refault_anon + Number of refaults of previously evicted anonymous pages. + + workingset_refault_file + Number of refaults of previously evicted file pages. - workingset_refault - Number of refaults of previously evicted pages + workingset_activate_anon + Number of refaulted anonymous pages that were immediately + activated. - workingset_activate - Number of refaulted pages that were immediately activated + workingset_activate_file + Number of refaulted file pages that were immediately activated. - workingset_restore - Number of restored pages which have been detected as an active - workingset before they got reclaimed. + workingset_restore_anon + Number of restored anonymous pages which have been detected as + an active workingset before they got reclaimed. + + workingset_restore_file + Number of restored file pages which have been detected as an + active workingset before they got reclaimed. workingset_nodereclaim Number of times a shadow node has been reclaimed - pgrefill + pgfault(npn) + Total number of page faults incurred + + pgmajfault(npn) + Number of major page faults incurred + + pgrefill(npn) Amount of scanned pages (in an active LRU list) - pgscan + pgscan(npn) Amount of scanned pages (in an inactive LRU list) - pgsteal + pgsteal(npn) Amount of reclaimed pages - pgactivate + pgactivate(npn) Amount of pages moved to the active LRU list - pgdeactivate + pgdeactivate(npn) Amount of pages moved to the inactive LRU list - pglazyfree + pglazyfree(npn) Amount of pages postponed to be freed under memory pressure - pglazyfreed + pglazyfreed(npn) Amount of reclaimed lazyfree pages - thp_fault_alloc + thp_fault_alloc(npn) Number of transparent hugepages which were allocated to satisfy a page fault. This counter is not present when CONFIG_TRANSPARENT_HUGEPAGE is not set. - thp_collapse_alloc + thp_collapse_alloc(npn) Number of transparent hugepages which were allocated to allow collapsing an existing range of pages. This counter is not present when CONFIG_TRANSPARENT_HUGEPAGE is not set. + memory.numa_stat + A read-only nested-keyed file which exists on non-root cgroups. + + This breaks down the cgroup's memory footprint into different + types of memory, type-specific details, and other information + per node on the state of the memory management system. + + This is useful for providing visibility into the NUMA locality + information within an memcg since the pages are allowed to be + allocated from any physical node. One of the use case is evaluating + application performance by combining this information with the + application's CPU allocation. + + All memory amounts are in bytes. + + The output format of memory.numa_stat is:: + + type N0=<bytes in node 0> N1=<bytes in node 1> ... + + The entries are ordered to be human readable, and new entries + can show up in the middle. Don't rely on items remaining in a + fixed position; use the keys to look up specific values! + + The entries can refer to the memory.stat. + memory.swap.current A read-only single value file which exists on non-root cgroups. diff --git a/Documentation/admin-guide/cpu-load.rst b/Documentation/admin-guide/cpu-load.rst index ebdecf864080..f3ada90e9ca8 100644 --- a/Documentation/admin-guide/cpu-load.rst +++ b/Documentation/admin-guide/cpu-load.rst @@ -61,43 +61,46 @@ will lead to quite erratic information inside ``/proc/stat``:: static volatile sig_atomic_t stop; - static void sighandler (int signr) + static void sighandler(int signr) { - (void) signr; - stop = 1; + (void) signr; + stop = 1; } + static unsigned long hog (unsigned long niters) { - stop = 0; - while (!stop && --niters); - return niters; + stop = 0; + while (!stop && --niters); + return niters; } + int main (void) { - int i; - struct itimerval it = { .it_interval = { .tv_sec = 0, .tv_usec = 1 }, - .it_value = { .tv_sec = 0, .tv_usec = 1 } }; - sigset_t set; - unsigned long v[HIST]; - double tmp = 0.0; - unsigned long n; - signal (SIGALRM, &sighandler); - setitimer (ITIMER_REAL, &it, NULL); - - hog (ULONG_MAX); - for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog (ULONG_MAX); - for (i = 0; i < HIST; ++i) tmp += v[i]; - tmp /= HIST; - n = tmp - (tmp / 3.0); - - sigemptyset (&set); - sigaddset (&set, SIGALRM); - - for (;;) { - hog (n); - sigwait (&set, &i); - } - return 0; + int i; + struct itimerval it = { + .it_interval = { .tv_sec = 0, .tv_usec = 1 }, + .it_value = { .tv_sec = 0, .tv_usec = 1 } }; + sigset_t set; + unsigned long v[HIST]; + double tmp = 0.0; + unsigned long n; + signal(SIGALRM, &sighandler); + setitimer(ITIMER_REAL, &it, NULL); + + hog (ULONG_MAX); + for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog(ULONG_MAX); + for (i = 0; i < HIST; ++i) tmp += v[i]; + tmp /= HIST; + n = tmp - (tmp / 3.0); + + sigemptyset(&set); + sigaddset(&set, SIGALRM); + + for (;;) { + hog(n); + sigwait(&set, &i); + } + return 0; } diff --git a/Documentation/admin-guide/device-mapper/dm-crypt.rst b/Documentation/admin-guide/device-mapper/dm-crypt.rst index 8f4a3f889d43..bc28a9527ee5 100644 --- a/Documentation/admin-guide/device-mapper/dm-crypt.rst +++ b/Documentation/admin-guide/device-mapper/dm-crypt.rst @@ -67,7 +67,7 @@ Parameters:: the value passed in <key_size>. <key_type> - Either 'logon' or 'user' kernel key type. + Either 'logon', 'user' or 'encrypted' kernel key type. <key_description> The kernel keyring key description crypt target should look for @@ -121,6 +121,14 @@ submit_from_crypt_cpus thread because it benefits CFQ to have writes submitted using the same context. +no_read_workqueue + Bypass dm-crypt internal workqueue and process read requests synchronously. + +no_write_workqueue + Bypass dm-crypt internal workqueue and process write requests synchronously. + This option is automatically enabled for host-managed zoned block devices + (e.g. host-managed SMR hard-disks). + integrity:<bytes>:<type> The device requires additional <bytes> metadata per-sector stored in per-bio integrity structure. This metadata must by provided diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt index d336f3f73a4c..63fd4e6a014b 100644 --- a/Documentation/admin-guide/devices.txt +++ b/Documentation/admin-guide/devices.txt @@ -1662,7 +1662,7 @@ 98 block User-mode virtual block device 0 = /dev/ubda First user-mode block device - 16 = /dev/udbb Second user-mode block device + 16 = /dev/ubdb Second user-mode block device ... Partitions are handled in the same way as for IDE diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst index e5a8def45f3f..6c04aea8f4cd 100644 --- a/Documentation/admin-guide/dynamic-debug-howto.rst +++ b/Documentation/admin-guide/dynamic-debug-howto.rst @@ -156,7 +156,6 @@ against. Possible keywords are::: ``line-range`` cannot contain space, e.g. "1-30" is valid range but "1 - 30" is not. - ``module=foo`` combined keyword=value form is interchangably accepted The meanings of each keyword are: diff --git a/Documentation/admin-guide/gpio/gpio-mockup.rst b/Documentation/admin-guide/gpio/gpio-mockup.rst new file mode 100644 index 000000000000..9fa1618b3adc --- /dev/null +++ b/Documentation/admin-guide/gpio/gpio-mockup.rst @@ -0,0 +1,50 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +GPIO Testing Driver +=================== + +The GPIO Testing Driver (gpio-mockup) provides a way to create simulated GPIO +chips for testing purposes. The lines exposed by these chips can be accessed +using the standard GPIO character device interface as well as manipulated +using the dedicated debugfs directory structure. + +Creating simulated chips using module params +-------------------------------------------- + +When loading the gpio-mockup driver a number of parameters can be passed to the +module. + + gpio_mockup_ranges + + This parameter takes an argument in the form of an array of integer + pairs. Each pair defines the base GPIO number (if any) and the number + of lines exposed by the chip. If the base GPIO is -1, the gpiolib + will assign it automatically. + + Example: gpio_mockup_ranges=-1,8,-1,16,405,4 + + The line above creates three chips. The first one will expose 8 lines, + the second 16 and the third 4. The base GPIO for the third chip is set + to 405 while for two first chips it will be assigned automatically. + + gpio_named_lines + + This parameter doesn't take any arguments. It lets the driver know that + GPIO lines exposed by it should be named. + + The name format is: gpio-mockup-X-Y where X is mockup chip's ID + and Y is the line offset. + +Manipulating simulated lines +---------------------------- + +Each mockup chip creates its own subdirectory in /sys/kernel/debug/gpio-mockup/. +The directory is named after the chip's label. A symlink is also created, named +after the chip's name, which points to the label directory. + +Inside each subdirectory, there's a separate attribute for each GPIO line. The +name of the attribute represents the line's offset in the chip. + +Reading from a line attribute returns the current value. Writing to it (0 or 1) +changes the configuration of the simulated pull-up/pull-down resistor +(1 - pull-up, 0 - pull-down). diff --git a/Documentation/admin-guide/gpio/index.rst b/Documentation/admin-guide/gpio/index.rst index ef2838638e96..7db367572f30 100644 --- a/Documentation/admin-guide/gpio/index.rst +++ b/Documentation/admin-guide/gpio/index.rst @@ -9,6 +9,7 @@ gpio gpio-aggregator sysfs + gpio-mockup .. only:: subproject and html diff --git a/Documentation/admin-guide/kdump/gdbmacros.txt b/Documentation/admin-guide/kdump/gdbmacros.txt index 220d0a80ca2c..82aecdcae8a6 100644 --- a/Documentation/admin-guide/kdump/gdbmacros.txt +++ b/Documentation/admin-guide/kdump/gdbmacros.txt @@ -170,57 +170,103 @@ document trapinfo address the kernel panicked. end -define dump_log_idx - set $idx = $arg0 - if ($argc > 1) - set $prev_flags = $arg1 +define dump_record + set var $desc = $arg0 + set var $info = $arg1 + if ($argc > 2) + set var $prev_flags = $arg2 else - set $prev_flags = 0 + set var $prev_flags = 0 end - set $msg = ((struct printk_log *) (log_buf + $idx)) - set $prefix = 1 - set $newline = 1 - set $log = log_buf + $idx + sizeof(*$msg) - - # prev & LOG_CONT && !(msg->flags & LOG_PREIX) - if (($prev_flags & 8) && !($msg->flags & 4)) - set $prefix = 0 + + set var $prefix = 1 + set var $newline = 1 + + set var $begin = $desc->text_blk_lpos.begin % (1U << prb->text_data_ring.size_bits) + set var $next = $desc->text_blk_lpos.next % (1U << prb->text_data_ring.size_bits) + + # handle data-less record + if ($begin & 1) + set var $text_len = 0 + set var $log = "" + else + # handle wrapping data block + if ($begin > $next) + set var $begin = 0 + end + + # skip over descriptor id + set var $begin = $begin + sizeof(long) + + # handle truncated message + if ($next - $begin < $info->text_len) + set var $text_len = $next - $begin + else + set var $text_len = $info->text_len + end + + set var $log = &prb->text_data_ring.data[$begin] + end + + # prev & LOG_CONT && !(info->flags & LOG_PREIX) + if (($prev_flags & 8) && !($info->flags & 4)) + set var $prefix = 0 end - # msg->flags & LOG_CONT - if ($msg->flags & 8) + # info->flags & LOG_CONT + if ($info->flags & 8) # (prev & LOG_CONT && !(prev & LOG_NEWLINE)) if (($prev_flags & 8) && !($prev_flags & 2)) - set $prefix = 0 + set var $prefix = 0 end - # (!(msg->flags & LOG_NEWLINE)) - if (!($msg->flags & 2)) - set $newline = 0 + # (!(info->flags & LOG_NEWLINE)) + if (!($info->flags & 2)) + set var $newline = 0 end end if ($prefix) - printf "[%5lu.%06lu] ", $msg->ts_nsec / 1000000000, $msg->ts_nsec % 1000000000 + printf "[%5lu.%06lu] ", $info->ts_nsec / 1000000000, $info->ts_nsec % 1000000000 end - if ($msg->text_len != 0) - eval "printf \"%%%d.%ds\", $log", $msg->text_len, $msg->text_len + if ($text_len) + eval "printf \"%%%d.%ds\", $log", $text_len, $text_len end if ($newline) printf "\n" end - if ($msg->dict_len > 0) - set $dict = $log + $msg->text_len - set $idx = 0 - set $line = 1 - while ($idx < $msg->dict_len) - if ($line) - printf " " - set $line = 0 + + # handle dictionary data + + set var $dict = &$info->dev_info.subsystem[0] + set var $dict_len = sizeof($info->dev_info.subsystem) + if ($dict[0] != '\0') + printf " SUBSYSTEM=" + set var $idx = 0 + while ($idx < $dict_len) + set var $c = $dict[$idx] + if ($c == '\0') + loop_break + else + if ($c < ' ' || $c >= 127 || $c == '\\') + printf "\\x%02x", $c + else + printf "%c", $c + end end - set $c = $dict[$idx] + set var $idx = $idx + 1 + end + printf "\n" + end + + set var $dict = &$info->dev_info.device[0] + set var $dict_len = sizeof($info->dev_info.device) + if ($dict[0] != '\0') + printf " DEVICE=" + set var $idx = 0 + while ($idx < $dict_len) + set var $c = $dict[$idx] if ($c == '\0') - printf "\n" - set $line = 1 + loop_break else if ($c < ' ' || $c >= 127 || $c == '\\') printf "\\x%02x", $c @@ -228,33 +274,46 @@ define dump_log_idx printf "%c", $c end end - set $idx = $idx + 1 + set var $idx = $idx + 1 end printf "\n" end end -document dump_log_idx - Dump a single log given its index in the log buffer. The first - parameter is the index into log_buf, the second is optional and - specified the previous log buffer's flags, used for properly - formatting continued lines. +document dump_record + Dump a single record. The first parameter is the descriptor, + the second parameter is the info, the third parameter is + optional and specifies the previous record's flags, used for + properly formatting continued lines. end define dmesg - set $i = log_first_idx - set $end_idx = log_first_idx - set $prev_flags = 0 + # definitions from kernel/printk/printk_ringbuffer.h + set var $desc_committed = 1 + set var $desc_finalized = 2 + set var $desc_sv_bits = sizeof(long) * 8 + set var $desc_flags_shift = $desc_sv_bits - 2 + set var $desc_flags_mask = 3 << $desc_flags_shift + set var $id_mask = ~$desc_flags_mask + + set var $desc_count = 1U << prb->desc_ring.count_bits + set var $prev_flags = 0 + + set var $id = prb->desc_ring.tail_id.counter + set var $end_id = prb->desc_ring.head_id.counter while (1) - set $msg = ((struct printk_log *) (log_buf + $i)) - if ($msg->len == 0) - set $i = 0 - else - dump_log_idx $i $prev_flags - set $i = $i + $msg->len - set $prev_flags = $msg->flags + set var $desc = &prb->desc_ring.descs[$id % $desc_count] + set var $info = &prb->desc_ring.infos[$id % $desc_count] + + # skip non-committed record + set var $state = 3 & ($desc->state_var.counter >> $desc_flags_shift) + if ($state == $desc_committed || $state == $desc_finalized) + dump_record $desc $info $prev_flags + set var $prev_flags = $info->flags end - if ($i == $end_idx) + + set var $id = ($id + 1) & $id_mask + if ($id == $end_id) loop_break end end diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst index 2da65fef2a1c..75a9dd98e76e 100644 --- a/Documentation/admin-guide/kdump/kdump.rst +++ b/Documentation/admin-guide/kdump/kdump.rst @@ -509,9 +509,12 @@ ELF32-format headers using the --elf32-core-headers kernel option on the dump kernel. You can also use the Crash utility to analyze dump files in Kdump -format. Crash is available on Dave Anderson's site at the following URL: +format. Crash is available at the following URL: - http://people.redhat.com/~anderson/ + https://github.com/crash-utility/crash + +Crash document can be found at: + https://crash-utility.github.io/ Trigger Kdump on WARN() ======================= diff --git a/Documentation/admin-guide/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst index 2baad0bfb09d..e44a6c01f336 100644 --- a/Documentation/admin-guide/kdump/vmcoreinfo.rst +++ b/Documentation/admin-guide/kdump/vmcoreinfo.rst @@ -189,50 +189,123 @@ from this. Free areas descriptor. User-space tools use this value to iterate the free_area ranges. MAX_ORDER is used by the zone buddy allocator. -log_first_idx +prb +--- + +A pointer to the printk ringbuffer (struct printk_ringbuffer). This +may be pointing to the static boot ringbuffer or the dynamically +allocated ringbuffer, depending on when the the core dump occurred. +Used by user-space tools to read the active kernel log buffer. + +printk_rb_static +---------------- + +A pointer to the static boot printk ringbuffer. If @prb has a +different value, this is useful for viewing the initial boot messages, +which may have been overwritten in the dynamically allocated +ringbuffer. + +clear_seq +--------- + +The sequence number of the printk() record after the last clear +command. It indicates the first record after the last +SYSLOG_ACTION_CLEAR, like issued by 'dmesg -c'. Used by user-space +tools to dump a subset of the dmesg log. + +printk_ringbuffer +----------------- + +The size of a printk_ringbuffer structure. This structure contains all +information required for accessing the various components of the +kernel log buffer. + +(printk_ringbuffer, desc_ring|text_data_ring|dict_data_ring|fail) +----------------------------------------------------------------- + +Offsets for the various components of the printk ringbuffer. Used by +user-space tools to view the kernel log buffer without requiring the +declaration of the structure. + +prb_desc_ring ------------- -Index of the first record stored in the buffer log_buf. Used by -user-space tools to read the strings in the log_buf. +The size of the prb_desc_ring structure. This structure contains +information about the set of record descriptors. -log_buf -------- +(prb_desc_ring, count_bits|descs|head_id|tail_id) +------------------------------------------------- + +Offsets for the fields describing the set of record descriptors. Used +by user-space tools to be able to traverse the descriptors without +requiring the declaration of the structure. + +prb_desc +-------- + +The size of the prb_desc structure. This structure contains +information about a single record descriptor. + +(prb_desc, info|state_var|text_blk_lpos|dict_blk_lpos) +------------------------------------------------------ + +Offsets for the fields describing a record descriptors. Used by +user-space tools to be able to read descriptors without requiring +the declaration of the structure. + +prb_data_blk_lpos +----------------- + +The size of the prb_data_blk_lpos structure. This structure contains +information about where the text or dictionary data (data block) is +located within the respective data ring. + +(prb_data_blk_lpos, begin|next) +------------------------------- -Console output is written to the ring buffer log_buf at index -log_first_idx. Used to get the kernel log. +Offsets for the fields describing the location of a data block. Used +by user-space tools to be able to locate data blocks without +requiring the declaration of the structure. -log_buf_len +printk_info ----------- -log_buf's length. +The size of the printk_info structure. This structure contains all +the meta-data for a record. -clear_idx ---------- +(printk_info, seq|ts_nsec|text_len|dict_len|caller_id) +------------------------------------------------------ -The index that the next printk() record to read after the last clear -command. It indicates the first record after the last SYSLOG_ACTION -_CLEAR, like issued by 'dmesg -c'. Used by user-space tools to dump -the dmesg log. +Offsets for the fields providing the meta-data for a record. Used by +user-space tools to be able to read the information without requiring +the declaration of the structure. -log_next_idx ------------- +prb_data_ring +------------- -The index of the next record to store in the buffer log_buf. Used to -compute the index of the current buffer position. +The size of the prb_data_ring structure. This structure contains +information about a set of data blocks. -printk_log ----------- +(prb_data_ring, size_bits|data|head_lpos|tail_lpos) +--------------------------------------------------- -The size of a structure printk_log. Used to compute the size of -messages, and extract dmesg log. It encapsulates header information for -log_buf, such as timestamp, syslog level, etc. +Offsets for the fields describing a set of data blocks. Used by +user-space tools to be able to access the data blocks without +requiring the declaration of the structure. -(printk_log, ts_nsec|len|text_len|dict_len) -------------------------------------------- +atomic_long_t +------------- + +The size of the atomic_long_t structure. Used by user-space tools to +be able to copy the full structure, regardless of its +architecture-specific implementation. + +(atomic_long_t, counter) +------------------------ -It represents field offsets in struct printk_log. User space tools -parse it and check whether the values of printk_log's members have been -changed. +Offset for the long value of an atomic_long_t variable. Used by +user-space tools to access the long value without requiring the +architecture-specific declaration. (free_area.free_list, MIGRATE_TYPES) ------------------------------------ diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index a1068742a6df..02d4adbf98d2 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -577,7 +577,7 @@ loops can be debugged more effectively on production systems. - clearcpuid=BITNUM [X86] + clearcpuid=BITNUM[,BITNUM...] [X86] Disable CPUID feature X for the kernel. See arch/x86/include/asm/cpufeatures.h for the valid bit numbers. Note the Linux specific bits are not necessarily @@ -591,13 +591,24 @@ some critical bits. cma=nn[MG]@[start[MG][-end[MG]]] - [ARM,X86,KNL] + [KNL,CMA] Sets the size of kernel global memory area for contiguous memory allocations and optionally the placement constraint by the physical address range of memory allocations. A value of 0 disables CMA altogether. For more information, see - include/linux/dma-contiguous.h + kernel/dma/contiguous.c + + cma_pernuma=nn[MG] + [ARM64,KNL] + Sets the size of kernel per-numa memory area for + contiguous memory allocations. A value of 0 disables + per-numa CMA altogether. And If this option is not + specificed, the default value is 0. + With per-numa CMA enabled, DMA users on node nid will + first try to allocate buffer from the pernuma area + which is located in node nid, if the allocation fails, + they will fallback to the global default memory area. cmo_free_hint= [PPC] Format: { yes | no } Specify whether pages are marked as being inactive @@ -940,7 +951,7 @@ Arch Perfmon v4 (Skylake and newer). disable_ddw [PPC/PSERIES] - Disable Dynamic DMA Window support. Use this if + Disable Dynamic DMA Window support. Use this to workaround buggy firmware. disable_ipv6= [IPV6] @@ -1019,7 +1030,7 @@ what data is available or for reverse-engineering. dyndbg[="val"] [KNL,DYNAMIC_DEBUG] - module.dyndbg[="val"] + <module>.dyndbg[="val"] Enable debug messages at boot time. See Documentation/admin-guide/dynamic-debug-howto.rst for details. @@ -1027,7 +1038,7 @@ nopku [X86] Disable Memory Protection Keys CPU feature found in some Intel CPUs. - module.async_probe [KNL] + <module>.async_probe [KNL] Enable asynchronous probe on this module. early_ioremap_debug [KNL] @@ -1332,12 +1343,18 @@ current integrity status. failslab= + fail_usercopy= fail_page_alloc= fail_make_request=[KNL] General fault injection mechanism. Format: <interval>,<probability>,<space>,<times> See also Documentation/fault-injection/. + fb_tunnels= [NET] + Format: { initns | none } + See Documentation/admin-guide/sysctl/net.rst for + fb_tunnels_only_for_init_ns + floppy= [HW] See Documentation/admin-guide/blockdev/floppy.rst. @@ -1956,7 +1973,7 @@ 1 - Bypass the IOMMU for DMA. unset - Use value of CONFIG_IOMMU_DEFAULT_PASSTHROUGH. - io7= [HW] IO7 for Marvel based alpha systems + io7= [HW] IO7 for Marvel-based Alpha systems See comment before marvel_specify_io7 in arch/alpha/kernel/core_marvel.c. @@ -2177,7 +2194,7 @@ kgdbwait [KGDB] Stop kernel execution and enter the kernel debugger at the earliest opportunity. - kmac= [MIPS] korina ethernet MAC address. + kmac= [MIPS] Korina ethernet MAC address. Configure the RouterBoard 532 series on-chip Ethernet adapter MAC address. @@ -2258,6 +2275,14 @@ [KVM,ARM] Allow use of GICv4 for direct injection of LPIs. + kvm_cma_resv_ratio=n [PPC] + Reserves given percentage from system memory area for + contiguous memory allocation for KVM hash pagetable + allocation. + By default it reserves 5% of total system memory. + Format: <integer> + Default: 5 + kvm-intel.ept= [KVM,Intel] Disable extended page tables (virtualized MMU) support on capable Intel chips. Default is 1 (enabled) @@ -2367,9 +2392,10 @@ lapic [X86-32,APIC] Enable the local APIC even if BIOS disabled it. - lapic= [X86,APIC] "notscdeadline" Do not use TSC deadline + lapic= [X86,APIC] Do not use TSC deadline value for LAPIC timer one-shot implementation. Default back to the programmable timer unit in the LAPIC. + Format: notscdeadline lapic_timer_c2_ok [X86,APIC] trust the local apic timer in C2 power state. @@ -2441,8 +2467,7 @@ memblock=debug [KNL] Enable memblock debug messages. - load_ramdisk= [RAM] List of ramdisks to load from floppy - See Documentation/admin-guide/blockdev/ramdisk.rst. + load_ramdisk= [RAM] [Deprecated] lockd.nlm_grace_period=P [NFS] Assign grace period. Format: <integer> @@ -2579,8 +2604,8 @@ (machvec) in a generic kernel. Example: machvec=hpzx1 - machtype= [Loongson] Share the same kernel image file between different - yeeloong laptop. + machtype= [Loongson] Share the same kernel image file between + different yeeloong laptops. Example: machtype=lemote-yeeloong-2f-7inch max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater @@ -3070,6 +3095,10 @@ and gids from such clients. This is intended to ease migration from NFSv2/v3. + nmi_backtrace.backtrace_idle [KNL] + Dump stacks even of idle CPUs in response to an + NMI stack-backtrace request. + nmi_debug= [KNL,SH] Specify one or more actions to take when a NMI is triggered. Format: [state][,regs][,debounce][,die] @@ -3185,7 +3214,7 @@ register save and restore. The kernel will only save legacy floating-point registers on task switch. - nohugeiomap [KNL,X86,PPC] Disable kernel huge I/O mappings. + nohugeiomap [KNL,X86,PPC,ARM64] Disable kernel huge I/O mappings. nosmt [KNL,S390] Disable symmetric multithreading (SMT). Equivalent to smt=1. @@ -3921,9 +3950,7 @@ Param: <number> - step/bucket size as a power of 2 for statistical time based profiling. - prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk - before loading. - See Documentation/admin-guide/blockdev/ramdisk.rst. + prompt_ramdisk= [RAM] [Deprecated] prot_virt= [S390] enable hosting protected virtual machines isolated from the hypervisor (if hardware supports @@ -3981,6 +4008,8 @@ ramdisk_size= [RAM] Sizes of RAM disks in kilobytes See Documentation/admin-guide/blockdev/ramdisk.rst. + ramdisk_start= [RAM] RAM disk image start address + random.trust_cpu={on,off} [KNL] Enable or disable trusting the use of the CPU's random number generator (if available) to @@ -4149,46 +4178,55 @@ This wake_up() will be accompanied by a WARN_ONCE() splat and an ftrace_dump(). + rcutree.rcu_unlock_delay= [KNL] + In CONFIG_RCU_STRICT_GRACE_PERIOD=y kernels, + this specifies an rcu_read_unlock()-time delay + in microseconds. This defaults to zero. + Larger delays increase the probability of + catching RCU pointer leaks, that is, buggy use + of RCU-protected pointers after the relevant + rcu_read_unlock() has completed. + rcutree.sysrq_rcu= [KNL] Commandeer a sysrq key to dump out Tree RCU's rcu_node tree with an eye towards determining why a new grace period has not yet started. - rcuperf.gp_async= [KNL] + rcuscale.gp_async= [KNL] Measure performance of asynchronous grace-period primitives such as call_rcu(). - rcuperf.gp_async_max= [KNL] + rcuscale.gp_async_max= [KNL] Specify the maximum number of outstanding callbacks per writer thread. When a writer thread exceeds this limit, it invokes the corresponding flavor of rcu_barrier() to allow previously posted callbacks to drain. - rcuperf.gp_exp= [KNL] + rcuscale.gp_exp= [KNL] Measure performance of expedited synchronous grace-period primitives. - rcuperf.holdoff= [KNL] + rcuscale.holdoff= [KNL] Set test-start holdoff period. The purpose of this parameter is to delay the start of the test until boot completes in order to avoid interference. - rcuperf.kfree_rcu_test= [KNL] + rcuscale.kfree_rcu_test= [KNL] Set to measure performance of kfree_rcu() flooding. - rcuperf.kfree_nthreads= [KNL] + rcuscale.kfree_nthreads= [KNL] The number of threads running loops of kfree_rcu(). - rcuperf.kfree_alloc_num= [KNL] + rcuscale.kfree_alloc_num= [KNL] Number of allocations and frees done in an iteration. - rcuperf.kfree_loops= [KNL] - Number of loops doing rcuperf.kfree_alloc_num number + rcuscale.kfree_loops= [KNL] + Number of loops doing rcuscale.kfree_alloc_num number of allocations and frees. - rcuperf.nreaders= [KNL] + rcuscale.nreaders= [KNL] Set number of RCU readers. The value -1 selects N, where N is the number of CPUs. A value "n" less than -1 selects N-n+1, where N is again @@ -4197,23 +4235,23 @@ A value of "n" less than or equal to -N selects a single reader. - rcuperf.nwriters= [KNL] + rcuscale.nwriters= [KNL] Set number of RCU writers. The values operate - the same as for rcuperf.nreaders. + the same as for rcuscale.nreaders. N, where N is the number of CPUs - rcuperf.perf_type= [KNL] + rcuscale.perf_type= [KNL] Specify the RCU implementation to test. - rcuperf.shutdown= [KNL] + rcuscale.shutdown= [KNL] Shut the system down after performance tests complete. This is useful for hands-off automated testing. - rcuperf.verbose= [KNL] + rcuscale.verbose= [KNL] Enable additional printk() statements. - rcuperf.writer_holdoff= [KNL] + rcuscale.writer_holdoff= [KNL] Write-side holdoff between grace periods, in microseconds. The default of zero says no holdoff. @@ -4266,6 +4304,18 @@ are zero, rcutorture acts as if is interpreted they are all non-zero. + rcutorture.irqreader= [KNL] + Run RCU readers from irq handlers, or, more + accurately, from a timer handler. Not all RCU + flavors take kindly to this sort of thing. + + rcutorture.leakpointer= [KNL] + Leak an RCU-protected pointer out of the reader. + This can of course result in splats, and is + intended to test the ability of things like + CONFIG_RCU_STRICT_GRACE_PERIOD=y to detect + such leaks. + rcutorture.n_barrier_cbs= [KNL] Set callbacks/threads for rcu_barrier() testing. @@ -4487,8 +4537,8 @@ refscale.shutdown= [KNL] Shut down the system at the end of the performance test. This defaults to 1 (shut it down) when - rcuperf is built into the kernel and to 0 (leave - it running) when rcuperf is built as a module. + refscale is built into the kernel and to 0 (leave + it running) when refscale is built as a module. refscale.verbose= [KNL] Enable additional printk() statements. @@ -4634,6 +4684,98 @@ Format: integer between 0 and 10 Default is 0. + scftorture.holdoff= [KNL] + Number of seconds to hold off before starting + test. Defaults to zero for module insertion and + to 10 seconds for built-in smp_call_function() + tests. + + scftorture.longwait= [KNL] + Request ridiculously long waits randomly selected + up to the chosen limit in seconds. Zero (the + default) disables this feature. Please note + that requesting even small non-zero numbers of + seconds can result in RCU CPU stall warnings, + softlockup complaints, and so on. + + scftorture.nthreads= [KNL] + Number of kthreads to spawn to invoke the + smp_call_function() family of functions. + The default of -1 specifies a number of kthreads + equal to the number of CPUs. + + scftorture.onoff_holdoff= [KNL] + Number seconds to wait after the start of the + test before initiating CPU-hotplug operations. + + scftorture.onoff_interval= [KNL] + Number seconds to wait between successive + CPU-hotplug operations. Specifying zero (which + is the default) disables CPU-hotplug operations. + + scftorture.shutdown_secs= [KNL] + The number of seconds following the start of the + test after which to shut down the system. The + default of zero avoids shutting down the system. + Non-zero values are useful for automated tests. + + scftorture.stat_interval= [KNL] + The number of seconds between outputting the + current test statistics to the console. A value + of zero disables statistics output. + + scftorture.stutter_cpus= [KNL] + The number of jiffies to wait between each change + to the set of CPUs under test. + + scftorture.use_cpus_read_lock= [KNL] + Use use_cpus_read_lock() instead of the default + preempt_disable() to disable CPU hotplug + while invoking one of the smp_call_function*() + functions. + + scftorture.verbose= [KNL] + Enable additional printk() statements. + + scftorture.weight_single= [KNL] + The probability weighting to use for the + smp_call_function_single() function with a zero + "wait" parameter. A value of -1 selects the + default if all other weights are -1. However, + if at least one weight has some other value, a + value of -1 will instead select a weight of zero. + + scftorture.weight_single_wait= [KNL] + The probability weighting to use for the + smp_call_function_single() function with a + non-zero "wait" parameter. See weight_single. + + scftorture.weight_many= [KNL] + The probability weighting to use for the + smp_call_function_many() function with a zero + "wait" parameter. See weight_single. + Note well that setting a high probability for + this weighting can place serious IPI load + on the system. + + scftorture.weight_many_wait= [KNL] + The probability weighting to use for the + smp_call_function_many() function with a + non-zero "wait" parameter. See weight_single + and weight_many. + + scftorture.weight_all= [KNL] + The probability weighting to use for the + smp_call_function_all() function with a zero + "wait" parameter. See weight_single and + weight_many. + + scftorture.weight_all_wait= [KNL] + The probability weighting to use for the + smp_call_function_all() function with a + non-zero "wait" parameter. See weight_single + and weight_many. + skew_tick= [KNL] Offset the periodic timer tick per cpu to mitigate xtime_lock contention on larger systems, and/or RCU lock contention on all systems with CONFIG_MAXSMP set. @@ -5828,6 +5970,14 @@ improve timer resolution at the expense of processing more timer interrupts. + xen.event_eoi_delay= [XEN] + How long to delay EOI handling in case of event + storms (jiffies). Default is 10. + + xen.event_loop_timeout= [XEN] + After which time (jiffies) the event handling loop + should start to delay EOI handling. Default is 2. + nopv= [X86,XEN,KVM,HYPER_V,VMWARE] Disables the PV optimizations forcing the guest to run as generic guest with no PV drivers. Currently support diff --git a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst index 5e477869df18..5fe1ade88c17 100644 --- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst +++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst @@ -1434,7 +1434,7 @@ on the feature, restricting the viewing angles. DYTC Lapmode sensor ------------------- +------------------- sysfs: dytc_lapmode diff --git a/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst index 4fb4ce56df7c..9f7b619f35f7 100644 --- a/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst +++ b/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst @@ -20,13 +20,13 @@ dvb-usb-dvbsky cards list - 0572:0320 * - DVBSky T680CI - 0572:680c - * - MyGica Mini DVB-T2 USB Stick T230 + * - MyGica Mini DVB-(T/T2/C) USB Stick T230 - 0572:c688 - * - MyGica Mini DVB-T2 USB Stick T230C + * - MyGica Mini DVB-(T/T2/C) USB Stick T230C - 0572:c689 - * - MyGica Mini DVB-T2 USB Stick T230C Lite + * - MyGica Mini DVB-(T/T2/C) USB Stick T230C Lite - 0572:c699 - * - MyGica Mini DVB-T2 USB Stick T230C v2 + * - MyGica Mini DVB-(T/T2/C) USB Stick T230C v2 - 0572:c68a * - TechnoTrend TT-connect CT2-4650 CI - 0b48:3012 diff --git a/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst index f01f9df1e249..e39bc8e4bffe 100644 --- a/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst +++ b/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst @@ -40,6 +40,10 @@ dvb-usb-dw2102 cards list - 0b48:3011 * - TerraTec Cinergy S USB - 0ccd:0064 + * - Terratec Cinergy S2 PCIe Dual Port 1 + - 153b:1181 + * - Terratec Cinergy S2 PCIe Dual Port 2 + - 153b:1182 * - Terratec Cinergy S2 USB BOX - 0ccd:0x0105 * - Terratec Cinergy S2 USB HD diff --git a/Documentation/admin-guide/media/em28xx-cardlist.rst b/Documentation/admin-guide/media/em28xx-cardlist.rst index a5f0e6d22a1a..ace65718ea22 100644 --- a/Documentation/admin-guide/media/em28xx-cardlist.rst +++ b/Documentation/admin-guide/media/em28xx-cardlist.rst @@ -434,3 +434,7 @@ EM28xx cards list - PCTV DVB-S2 Stick (461e v2) - em28178 - 2013:0461, 2013:0259 + * - 105 + - MyGica iGrabber + - em2860 + - 1f4d:1abe diff --git a/Documentation/admin-guide/media/ipu3.rst b/Documentation/admin-guide/media/ipu3.rst index 9361c34f123e..07d139bf8459 100644 --- a/Documentation/admin-guide/media/ipu3.rst +++ b/Documentation/admin-guide/media/ipu3.rst @@ -89,41 +89,41 @@ Let us take the example of ov5670 sensor connected to CSI2 port 0, for a Using the media contorller APIs, the ov5670 sensor is configured to send frames in packed raw Bayer format to IPU3 CSI2 receiver. -# This example assumes /dev/media0 as the CIO2 media device - -export MDEV=/dev/media0 - -# and that ov5670 sensor is connected to i2c bus 10 with address 0x36 - -export SDEV=$(media-ctl -d $MDEV -e "ov5670 10-0036") +.. code-block:: none -# Establish the link for the media devices using media-ctl [#f3]_ -media-ctl -d $MDEV -l "ov5670:0 -> ipu3-csi2 0:0[1]" + # This example assumes /dev/media0 as the CIO2 media device + export MDEV=/dev/media0 -# Set the format for the media devices -media-ctl -d $MDEV -V "ov5670:0 [fmt:SGRBG10/2592x1944]" + # and that ov5670 sensor is connected to i2c bus 10 with address 0x36 + export SDEV=$(media-ctl -d $MDEV -e "ov5670 10-0036") -media-ctl -d $MDEV -V "ipu3-csi2 0:0 [fmt:SGRBG10/2592x1944]" + # Establish the link for the media devices using media-ctl [#f3]_ + media-ctl -d $MDEV -l "ov5670:0 -> ipu3-csi2 0:0[1]" -media-ctl -d $MDEV -V "ipu3-csi2 0:1 [fmt:SGRBG10/2592x1944]" + # Set the format for the media devices + media-ctl -d $MDEV -V "ov5670:0 [fmt:SGRBG10/2592x1944]" + media-ctl -d $MDEV -V "ipu3-csi2 0:0 [fmt:SGRBG10/2592x1944]" + media-ctl -d $MDEV -V "ipu3-csi2 0:1 [fmt:SGRBG10/2592x1944]" Once the media pipeline is configured, desired sensor specific settings (such as exposure and gain settings) can be set, using the yavta tool. e.g -yavta -w 0x009e0903 444 $SDEV - -yavta -w 0x009e0913 1024 $SDEV +.. code-block:: none -yavta -w 0x009e0911 2046 $SDEV + yavta -w 0x009e0903 444 $SDEV + yavta -w 0x009e0913 1024 $SDEV + yavta -w 0x009e0911 2046 $SDEV Once the desired sensor settings are set, frame captures can be done as below. e.g -yavta --data-prefix -u -c10 -n5 -I -s2592x1944 --file=/tmp/frame-#.bin \ - -f IPU3_SGRBG10 $(media-ctl -d $MDEV -e "ipu3-cio2 0") +.. code-block:: none + + yavta --data-prefix -u -c10 -n5 -I -s2592x1944 --file=/tmp/frame-#.bin \ + -f IPU3_SGRBG10 $(media-ctl -d $MDEV -e "ipu3-cio2 0") With the above command, 10 frames are captured at 2592x1944 resolution, with sGRBG10 format and output as IPU3_SGRBG10 format. @@ -269,21 +269,21 @@ all the video nodes setup correctly. Let us take "ipu3-imgu 0" subdev as an example. -media-ctl -d $MDEV -r - -media-ctl -d $MDEV -l "ipu3-imgu 0 input":0 -> "ipu3-imgu 0":0[1] - -media-ctl -d $MDEV -l "ipu3-imgu 0":2 -> "ipu3-imgu 0 output":0[1] - -media-ctl -d $MDEV -l "ipu3-imgu 0":3 -> "ipu3-imgu 0 viewfinder":0[1] +.. code-block:: none -media-ctl -d $MDEV -l "ipu3-imgu 0":4 -> "ipu3-imgu 0 3a stat":0[1] + media-ctl -d $MDEV -r + media-ctl -d $MDEV -l "ipu3-imgu 0 input":0 -> "ipu3-imgu 0":0[1] + media-ctl -d $MDEV -l "ipu3-imgu 0":2 -> "ipu3-imgu 0 output":0[1] + media-ctl -d $MDEV -l "ipu3-imgu 0":3 -> "ipu3-imgu 0 viewfinder":0[1] + media-ctl -d $MDEV -l "ipu3-imgu 0":4 -> "ipu3-imgu 0 3a stat":0[1] Also the pipe mode of the corresponding V4L2 subdev should be set as desired (e.g 0 for video mode or 1 for still mode) through the control id 0x009819a1 as below. -yavta -w "0x009819A1 1" /dev/v4l-subdev7 +.. code-block:: none + + yavta -w "0x009819A1 1" /dev/v4l-subdev7 Certain hardware blocks in ImgU pipeline can change the frame resolution by cropping or scaling, these hardware blocks include Input Feeder(IF), Bayer Down @@ -371,30 +371,32 @@ v4l2n command can be used. This helps process the raw Bayer frames and produces the desired results for the main output image and the viewfinder output, in NV12 format. -v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4 ---fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069 ---reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 --output=/tmp/frames.out ---open=/dev/video5 ---fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 ---reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 --output=/tmp/frames.vf ---open=/dev/video6 ---fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 ---reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7 ---output=/tmp/frames.3A --fmt=type:META_CAPTURE,? ---reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5 +.. code-block:: none + + v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4 + --fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069 \ + --reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 \ + --output=/tmp/frames.out --open=/dev/video5 \ + --fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 \ + --reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 \ + --output=/tmp/frames.vf --open=/dev/video6 \ + --fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 \ + --reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7 \ + --output=/tmp/frames.3A --fmt=type:META_CAPTURE,? \ + --reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5 You can also use yavta [#f2]_ command to do same thing as above: .. code-block:: none - yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \ - --file=frame-#.out-f NV12 /dev/video5 & \ - yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \ - --file=frame-#.vf -f NV12 /dev/video6 & \ - yavta --data-prefix -Bmeta-capture -c10 -n5 -I \ - --file=frame-#.3a /dev/video7 & \ - yavta --data-prefix -Boutput-mplane -c10 -n5 -I -s2592x1944 \ - --file=/tmp/frame-in.cio2 -f IPU3_SGRBG10 /dev/video4 + yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \ + --file=frame-#.out-f NV12 /dev/video5 & \ + yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \ + --file=frame-#.vf -f NV12 /dev/video6 & \ + yavta --data-prefix -Bmeta-capture -c10 -n5 -I \ + --file=frame-#.3a /dev/video7 & \ + yavta --data-prefix -Boutput-mplane -c10 -n5 -I -s2592x1944 \ + --file=/tmp/frame-in.cio2 -f IPU3_SGRBG10 /dev/video4 where /dev/video4, /dev/video5, /dev/video6 and /dev/video7 devices point to input, output, viewfinder and 3A statistics video nodes respectively. @@ -408,7 +410,9 @@ as below. Main output frames ~~~~~~~~~~~~~~~~~~ -raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.out /tmp/frames.out.ppm +.. code-block:: none + + raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.out /tmp/frames.out.ppm where 2560x1920 is output resolution, NV12 is the video format, followed by input frame and output PNM file. @@ -416,7 +420,9 @@ by input frame and output PNM file. Viewfinder output frames ~~~~~~~~~~~~~~~~~~~~~~~~ -raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.vf /tmp/frames.vf.ppm +.. code-block:: none + + raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.vf /tmp/frames.vf.ppm where 2560x1920 is output resolution, NV12 is the video format, followed by input frame and output PNM file. @@ -482,63 +488,63 @@ Name Description Optical Black Correction Optical Black Correction block subtracts a pre-defined value from the respective pixel values to obtain better image quality. - Defined in :c:type:`ipu3_uapi_obgrid_param`. + Defined in struct ipu3_uapi_obgrid_param. Linearization This algo block uses linearization parameters to address non-linearity sensor effects. The Lookup table table is defined in - :c:type:`ipu3_uapi_isp_lin_vmem_params`. + struct ipu3_uapi_isp_lin_vmem_params. SHD Lens shading correction is used to correct spatial non-uniformity of the pixel response due to optical lens shading. This is done by applying a different gain for each pixel. The gain, black level etc are - configured in :c:type:`ipu3_uapi_shd_config_static`. + configured in struct ipu3_uapi_shd_config_static. BNR Bayer noise reduction block removes image noise by applying a bilateral filter. - See :c:type:`ipu3_uapi_bnr_static_config` for details. + See struct ipu3_uapi_bnr_static_config for details. ANR Advanced Noise Reduction is a block based algorithm that performs noise reduction in the Bayer domain. The convolution matrix etc can be found in - :c:type:`ipu3_uapi_anr_config`. + struct ipu3_uapi_anr_config. DM Demosaicing converts raw sensor data in Bayer format into RGB (Red, Green, Blue) presentation. Then add outputs of estimation of Y channel for following stream processing by Firmware. The struct is defined as - :c:type:`ipu3_uapi_dm_config`. + struct ipu3_uapi_dm_config. Color Correction Color Correction algo transforms sensor specific color space to the standard "sRGB" color space. This is done by applying 3x3 matrix defined in - :c:type:`ipu3_uapi_ccm_mat_config`. -Gamma correction Gamma correction :c:type:`ipu3_uapi_gamma_config` is a + struct ipu3_uapi_ccm_mat_config. +Gamma correction Gamma correction struct ipu3_uapi_gamma_config is a basic non-linear tone mapping correction that is applied per pixel for each pixel component. CSC Color space conversion transforms each pixel from the RGB primary presentation to YUV (Y: brightness, UV: Luminance) presentation. This is done by applying a 3x3 matrix defined in - :c:type:`ipu3_uapi_csc_mat_config` + struct ipu3_uapi_csc_mat_config CDS Chroma down sampling After the CSC is performed, the Chroma Down Sampling is applied for a UV plane down sampling by a factor of 2 in each direction for YUV 4:2:0 using a 4x2 - configurable filter :c:type:`ipu3_uapi_cds_params`. + configurable filter struct ipu3_uapi_cds_params. CHNR Chroma noise reduction This block processes only the chrominance pixels and performs noise reduction by cleaning the high frequency noise. - See struct :c:type:`ipu3_uapi_yuvp1_chnr_config`. + See struct struct ipu3_uapi_yuvp1_chnr_config. TCC Total color correction as defined in struct - :c:type:`ipu3_uapi_yuvp2_tcc_static_config`. + struct ipu3_uapi_yuvp2_tcc_static_config. XNR3 eXtreme Noise Reduction V3 is the third revision of noise reduction algorithm used to improve image quality. This removes the low frequency noise in the captured image. Two related structs are being defined, - :c:type:`ipu3_uapi_isp_xnr3_params` for ISP data memory - and :c:type:`ipu3_uapi_isp_xnr3_vmem_params` for vector + struct ipu3_uapi_isp_xnr3_params for ISP data memory + and struct ipu3_uapi_isp_xnr3_vmem_params for vector memory. TNR Temporal Noise Reduction block compares successive frames in time to remove anomalies / noise in pixel - values. :c:type:`ipu3_uapi_isp_tnr3_vmem_params` and - :c:type:`ipu3_uapi_isp_tnr3_params` are defined for ISP + values. struct ipu3_uapi_isp_tnr3_vmem_params and + struct ipu3_uapi_isp_tnr3_params are defined for ISP vector and data memory respectively. ======================== ======================================================= @@ -570,9 +576,9 @@ processor, while many others will use a set of fixed hardware blocks also called accelerator cluster (ACC) to crunch pixel data and produce statistics. ACC parameters of individual algorithms, as defined by -:c:type:`ipu3_uapi_acc_param`, can be chosen to be applied by the user -space through struct :c:type:`ipu3_uapi_flags` embedded in -:c:type:`ipu3_uapi_params` structure. For parameters that are configured as +struct ipu3_uapi_acc_param, can be chosen to be applied by the user +space through struct struct ipu3_uapi_flags embedded in +struct ipu3_uapi_params structure. For parameters that are configured as not enabled by the user space, the corresponding structs are ignored by the driver, in which case the existing configuration of the algorithm will be preserved. diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst index 434fe996b541..f4d670e632f8 100644 --- a/Documentation/admin-guide/media/pci-cardlist.rst +++ b/Documentation/admin-guide/media/pci-cardlist.rst @@ -90,6 +90,7 @@ sta2x11_vip STA2X11 VIP Video For Linux tw5864 Techwell TW5864 video/audio grabber and encoder tw686x Intersil/Techwell TW686x tw68 Techwell tw68x Video For Linux +zoran Zoran-36057/36067 JPEG codec ================ ======================================================== Some of those drivers support multiple devices, as shown at the card @@ -105,3 +106,4 @@ lists below: ivtv-cardlist saa7134-cardlist saa7164-cardlist + zoran-cardlist diff --git a/Documentation/admin-guide/media/rkisp1.dot b/Documentation/admin-guide/media/rkisp1.dot new file mode 100644 index 000000000000..54c1953a6130 --- /dev/null +++ b/Documentation/admin-guide/media/rkisp1.dot @@ -0,0 +1,18 @@ +digraph board { + rankdir=TB + n00000001 [label="{{<port0> 0 | <port1> 1} | rkisp1_isp\n/dev/v4l-subdev0 | {<port2> 2 | <port3> 3}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port2 -> n00000006:port0 + n00000001:port2 -> n00000009:port0 + n00000001:port3 -> n00000014 [style=bold] + n00000006 [label="{{<port0> 0} | rkisp1_resizer_mainpath\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000006:port1 -> n0000000c [style=bold] + n00000009 [label="{{<port0> 0} | rkisp1_resizer_selfpath\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000009:port1 -> n00000010 [style=bold] + n0000000c [label="rkisp1_mainpath\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n00000010 [label="rkisp1_selfpath\n/dev/video1", shape=box, style=filled, fillcolor=yellow] + n00000014 [label="rkisp1_stats\n/dev/video2", shape=box, style=filled, fillcolor=yellow] + n00000018 [label="rkisp1_params\n/dev/video3", shape=box, style=filled, fillcolor=yellow] + n00000018 -> n00000001:port1 [style=bold] + n0000001c [label="{{} | imx219 4-0010\n/dev/v4l-subdev3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n0000001c:port0 -> n00000001:port0 +} diff --git a/Documentation/admin-guide/media/rkisp1.rst b/Documentation/admin-guide/media/rkisp1.rst new file mode 100644 index 000000000000..42e37ed255f6 --- /dev/null +++ b/Documentation/admin-guide/media/rkisp1.rst @@ -0,0 +1,181 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: <isonum.txt> + +========================================= +Rockchip Image Signal Processor (rkisp1) +========================================= + +Introduction +============ + +This file documents the driver for the Rockchip ISP1 that is part of RK3288 +and RK3399 SoCs. The driver is located under drivers/staging/media/rkisp1 +and uses the Media-Controller API. + +Topology +======== +.. _rkisp1_topology_graph: + +.. kernel-figure:: rkisp1.dot + :alt: Diagram of the default media pipeline topology + :align: center + + +The driver has 4 video devices: + +- rkisp1_mainpath: capture device for retrieving images, usually in higher + resolution. +- rkisp1_selfpath: capture device for retrieving images. +- rkisp1_stats: a metadata capture device that sends statistics. +- rkisp1_params: a metadata output device that receives parameters + configurations from userspace. + +The driver has 3 subdevices: + +- rkisp1_resizer_mainpath: used to resize and downsample frames for the + mainpath capture device. +- rkisp1_resizer_selfpath: used to resize and downsample frames for the + selfpath capture device. +- rkisp1_isp: is connected to the sensor and is responsible for all the isp + operations. + + +rkisp1_mainpath, rkisp1_selfpath - Frames Capture Video Nodes +------------------------------------------------------------- +Those are the `mainpath` and `selfpath` capture devices to capture frames. +Those entities are the DMA engines that write the frames to memory. +The selfpath video device can capture YUV/RGB formats. Its input is YUV encoded +stream and it is able to convert it to RGB. The selfpath is not able to +capture bayer formats. +The mainpath can capture both bayer and YUV formats but it is not able to +capture RGB formats. +Both capture videos support +the ``V4L2_CAP_IO_MC`` :ref:`capability <device-capabilities>`. + + +rkisp1_resizer_mainpath, rkisp1_resizer_selfpath - Resizers Subdevices Nodes +---------------------------------------------------------------------------- +Those are resizer entities for the mainpath and the selfpath. Those entities +can scale the frames up and down and also change the YUV sampling (for example +YUV4:2:2 -> YUV4:2:0). They also have cropping capability on the sink pad. +The resizers entities can only operate on YUV:4:2:2 format +(MEDIA_BUS_FMT_YUYV8_2X8). +The mainpath capture device supports capturing video in bayer formats. In that +case the resizer of the mainpath is set to 'bypass' mode - it just forward the +frame without operating on it. + +rkisp1_isp - Image Signal Processing Subdevice Node +--------------------------------------------------- +This is the isp entity. It is connected to the sensor on sink pad 0 and +receives the frames using the CSI-2 protocol. It is responsible of configuring +the CSI-2 protocol. It has a cropping capability on sink pad 0 that is +connected to the sensor and on source pad 2 connected to the resizer entities. +Cropping on sink pad 0 defines the image region from the sensor. +Cropping on source pad 2 defines the region for the Image Stabilizer (IS). + +.. _rkisp1_stats: + +rkisp1_stats - Statistics Video Node +------------------------------------ +The statistics video node outputs the 3A (auto focus, auto exposure and auto +white balance) statistics, and also histogram statistics for the frames that +are being processed by the rkisp1 to userspace applications. +Using these data, applications can implement algorithms and re-parameterize +the driver through the rkisp_params node to improve image quality during a +video stream. +The buffer format is defined by struct :c:type:`rkisp1_stat_buffer`, and +userspace should set +:ref:`V4L2_META_FMT_RK_ISP1_STAT_3A <v4l2-meta-fmt-stat-rkisp1>` as the +dataformat. + +.. _rkisp1_params: + +rkisp1_params - Parameters Video Node +------------------------------------- +The rkisp1_params video node receives a set of parameters from userspace +to be applied to the hardware during a video stream, allowing userspace +to dynamically modify values such as black level, cross talk corrections +and others. + +The buffer format is defined by struct :c:type:`rkisp1_params_cfg`, and +userspace should set +:ref:`V4L2_META_FMT_RK_ISP1_PARAMS <v4l2-meta-fmt-params-rkisp1>` as the +dataformat. + + +Capturing Video Frames Example +============================== + +In the following example, the sensor connected to pad 0 of 'rkisp1_isp' is +imx219. + +The following commands can be used to capture video from the selfpath video +node with dimension 900x800 planar format YUV 4:2:2. It uses all cropping +capabilities possible, (see explanation right below) + +.. code-block:: bash + + # set the links + "media-ctl" "-d" "platform:rkisp1" "-r" + "media-ctl" "-d" "platform:rkisp1" "-l" "'imx219 4-0010':0 -> 'rkisp1_isp':0 [1]" + "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_selfpath':0 [1]" + "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_mainpath':0 [0]" + + # set format for imx219 4-0010:0 + "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"imx219 4-0010":0 [fmt:SRGGB10_1X10/1640x1232]' + + # set format for rkisp1_isp pads: + "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":0 [fmt:SRGGB10_1X10/1640x1232 crop: (0,0)/1600x1200]' + "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":2 [fmt:YUYV8_2X8/1600x1200 crop: (0,0)/1500x1100]' + + # set format for rkisp1_resizer_selfpath pads: + "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":0 [fmt:YUYV8_2X8/1500x1100 crop: (300,400)/1400x1000]' + "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":1 [fmt:YUYV8_2X8/900x800]' + + # set format for rkisp1_selfpath: + "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "width=900,height=800," + "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "pixelformat=422P" + + # start streaming: + v4l2-ctl "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "--stream-mmap" "--stream-count" "10" + + +In the above example the sensor is configured to bayer format: +`SRGGB10_1X10/1640x1232`. The rkisp1_isp:0 pad should be configured to the +same mbus format and dimensions as the sensor, otherwise streaming will fail +with 'EPIPE' error. So it is also configured to `SRGGB10_1X10/1640x1232`. +In addition, the rkisp1_isp:0 pad is configured to cropping `(0,0)/1600x1200`. + +The cropping dimensions are automatically propagated to be the format of the +isp source pad `rkisp1_isp:2`. Another cropping operation is configured on +the isp source pad: `(0,0)/1500x1100`. + +The resizer's sink pad `rkisp1_resizer_selfpath` should be configured to format +`YUYV8_2X8/1500x1100` in order to match the format on the other side of the +link. In addition a cropping `(300,400)/1400x1000` is configured on it. + +The source pad of the resizer, `rkisp1_resizer_selfpath:1` is configured to +format `YUYV8_2X8/900x800`. That means that the resizer first crop a window +of `(300,400)/1400x100` from the received frame and then scales this window +to dimension `900x800`. + +Note that the above example does not uses the stats-params control loop. +Therefore the capture frames will not go through the 3A algorithms and +probably won't have a good quality, and can even look dark and greenish. + +Configuring Quantization +======================== + +The driver supports limited and full range quantization on YUV formats, +where limited is the default. +To switch between one or the other, userspace should use the Colorspace +Conversion API (CSC) for subdevices on source pad 2 of the +isp (`rkisp1_isp:2`). The quantization configured on this pad is the +quantization of the captured video frames on the mainpath and selfpath +video nodes. +Note that the resizer and capture entities will always report +``V4L2_QUANTIZATION_DEFAULT`` even if the quantization is configured to full +range on `rkisp1_isp:2`. So in order to get the configured quantization, +application should get it from pad `rkisp1_isp:2`. + diff --git a/Documentation/admin-guide/media/siano-cardlist.rst b/Documentation/admin-guide/media/siano-cardlist.rst index d387c04d753c..bb731a953878 100644 --- a/Documentation/admin-guide/media/siano-cardlist.rst +++ b/Documentation/admin-guide/media/siano-cardlist.rst @@ -20,7 +20,7 @@ Siano cards list - 2040:1801 * - Hauppauge WinTV MiniCard - 2040:2000, 2040:200a, 2040:2010, 2040:2011, 2040:2019 - * - Hauppauge WinTV MiniCard + * - Hauppauge WinTV MiniCard Rev 2 - 2040:2009 * - Hauppauge WinTV MiniStick - 2040:5500, 2040:5510, 2040:5520, 2040:5530, 2040:5580, 2040:5590, 2040:b900, 2040:b910, 2040:b980, 2040:b990, 2040:c000, 2040:c010, 2040:c080, 2040:c090, 2040:c0a0, 2040:f5a0 diff --git a/Documentation/admin-guide/media/usb-cardlist.rst b/Documentation/admin-guide/media/usb-cardlist.rst index 546fd40da4c3..1e96f928e0af 100644 --- a/Documentation/admin-guide/media/usb-cardlist.rst +++ b/Documentation/admin-guide/media/usb-cardlist.rst @@ -112,7 +112,6 @@ zr364xx USB ZR364XX Camera em28xx-cardlist tm6000-cardlist siano-cardlist - usbvision-cardlist gspca-cardlist diff --git a/Documentation/admin-guide/media/usbvision-cardlist.rst b/Documentation/admin-guide/media/usbvision-cardlist.rst deleted file mode 100644 index 6aee115ee6e2..000000000000 --- a/Documentation/admin-guide/media/usbvision-cardlist.rst +++ /dev/null @@ -1,283 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -USBvision cards list -==================== - -.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| - -.. flat-table:: - :header-rows: 1 - :widths: 2 19 18 - :stub-columns: 0 - - * - Card number - - Card name - - USB IDs - - * - 0 - - Xanboo - - 0a6f:0400 - - * - 1 - - Belkin USB VideoBus II Adapter - - 050d:0106 - - * - 2 - - Belkin Components USB VideoBus - - 050d:0207 - - * - 3 - - Belkin USB VideoBus II - - 050d:0208 - - * - 4 - - echoFX InterView Lite - - 0571:0002 - - * - 5 - - USBGear USBG-V1 resp. HAMA USB - - 0573:0003 - - * - 6 - - D-Link V100 - - 0573:0400 - - * - 7 - - X10 USB Camera - - 0573:2000 - - * - 8 - - Hauppauge WinTV USB Live (PAL B/G) - - 0573:2d00 - - * - 9 - - Hauppauge WinTV USB Live Pro (NTSC M/N) - - 0573:2d01 - - * - 10 - - Zoran Co. PMD (Nogatech) AV-grabber Manhattan - - 0573:2101 - - * - 11 - - Nogatech USB-TV (NTSC) FM - - 0573:4100 - - * - 12 - - PNY USB-TV (NTSC) FM - - 0573:4110 - - * - 13 - - PixelView PlayTv-USB PRO (PAL) FM - - 0573:4450 - - * - 14 - - ZTV ZT-721 2.4GHz USB A/V Receiver - - 0573:4550 - - * - 15 - - Hauppauge WinTV USB (NTSC M/N) - - 0573:4d00 - - * - 16 - - Hauppauge WinTV USB (PAL B/G) - - 0573:4d01 - - * - 17 - - Hauppauge WinTV USB (PAL I) - - 0573:4d02 - - * - 18 - - Hauppauge WinTV USB (PAL/SECAM L) - - 0573:4d03 - - * - 19 - - Hauppauge WinTV USB (PAL D/K) - - 0573:4d04 - - * - 20 - - Hauppauge WinTV USB (NTSC FM) - - 0573:4d10 - - * - 21 - - Hauppauge WinTV USB (PAL B/G FM) - - 0573:4d11 - - * - 22 - - Hauppauge WinTV USB (PAL I FM) - - 0573:4d12 - - * - 23 - - Hauppauge WinTV USB (PAL D/K FM) - - 0573:4d14 - - * - 24 - - Hauppauge WinTV USB Pro (NTSC M/N) - - 0573:4d2a - - * - 25 - - Hauppauge WinTV USB Pro (NTSC M/N) V2 - - 0573:4d2b - - * - 26 - - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L) - - 0573:4d2c - - * - 27 - - Hauppauge WinTV USB Pro (NTSC M/N) V3 - - 0573:4d20 - - * - 28 - - Hauppauge WinTV USB Pro (PAL B/G) - - 0573:4d21 - - * - 29 - - Hauppauge WinTV USB Pro (PAL I) - - 0573:4d22 - - * - 30 - - Hauppauge WinTV USB Pro (PAL/SECAM L) - - 0573:4d23 - - * - 31 - - Hauppauge WinTV USB Pro (PAL D/K) - - 0573:4d24 - - * - 32 - - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) - - 0573:4d25 - - * - 33 - - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2 - - 0573:4d26 - - * - 34 - - Hauppauge WinTV USB Pro (PAL B/G) V2 - - 0573:4d27 - - * - 35 - - Hauppauge WinTV USB Pro (PAL B/G,D/K) - - 0573:4d28 - - * - 36 - - Hauppauge WinTV USB Pro (PAL I,D/K) - - 0573:4d29 - - * - 37 - - Hauppauge WinTV USB Pro (NTSC M/N FM) - - 0573:4d30 - - * - 38 - - Hauppauge WinTV USB Pro (PAL B/G FM) - - 0573:4d31 - - * - 39 - - Hauppauge WinTV USB Pro (PAL I FM) - - 0573:4d32 - - * - 40 - - Hauppauge WinTV USB Pro (PAL D/K FM) - - 0573:4d34 - - * - 41 - - Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM) - - 0573:4d35 - - * - 42 - - Hauppauge WinTV USB Pro (Temic PAL B/G FM) - - 0573:4d36 - - * - 43 - - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM) - - 0573:4d37 - - * - 44 - - Hauppauge WinTV USB Pro (NTSC M/N FM) V2 - - 0573:4d38 - - * - 45 - - Camtel Technology USB TV Genie Pro FM Model TVB330 - - 0768:0006 - - * - 46 - - Digital Video Creator I - - 07d0:0001 - - * - 47 - - Global Village GV-007 (NTSC) - - 07d0:0002 - - * - 48 - - Dazzle Fusion Model DVC-50 Rev 1 (NTSC) - - 07d0:0003 - - * - 49 - - Dazzle Fusion Model DVC-80 Rev 1 (PAL) - - 07d0:0004 - - * - 50 - - Dazzle Fusion Model DVC-90 Rev 1 (SECAM) - - 07d0:0005 - - * - 51 - - Eskape Labs MyTV2Go - - 07f8:9104 - - * - 52 - - Pinnacle Studio PCTV USB (PAL) - - 2304:010d - - * - 53 - - Pinnacle Studio PCTV USB (SECAM) - - 2304:0109 - - * - 54 - - Pinnacle Studio PCTV USB (PAL) FM - - 2304:0110 - - * - 55 - - Miro PCTV USB - - 2304:0111 - - * - 56 - - Pinnacle Studio PCTV USB (NTSC) FM - - 2304:0112 - - * - 57 - - Pinnacle Studio PCTV USB (PAL) FM V2 - - 2304:0210 - - * - 58 - - Pinnacle Studio PCTV USB (NTSC) FM V2 - - 2304:0212 - - * - 59 - - Pinnacle Studio PCTV USB (PAL) FM V3 - - 2304:0214 - - * - 60 - - Pinnacle Studio Linx Video input cable (NTSC) - - 2304:0300 - - * - 61 - - Pinnacle Studio Linx Video input cable (PAL) - - 2304:0301 - - * - 62 - - Pinnacle PCTV Bungee USB (PAL) FM - - 2304:0419 - - * - 63 - - Hauppauge WinTv-USB - - 2400:4200 - - * - 64 - - Pinnacle Studio PCTV USB (NTSC) FM V3 - - 2304:0113 - - * - 65 - - Nogatech USB MicroCam NTSC (NV3000N) - - 0573:3000 - - * - 66 - - Nogatech USB MicroCam PAL (NV3001P) - - 0573:3001 diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst index 251cc4ede0b6..9c7ebe2ca3bd 100644 --- a/Documentation/admin-guide/media/v4l-drivers.rst +++ b/Documentation/admin-guide/media/v4l-drivers.rst @@ -25,6 +25,7 @@ Video4Linux (V4L) driver-specific documentation philips qcom_camss rcar-fdp1 + rkisp1 saa7134 si470x si4713 diff --git a/Documentation/admin-guide/media/zoran-cardlist.rst b/Documentation/admin-guide/media/zoran-cardlist.rst new file mode 100644 index 000000000000..d7fc8bed62ff --- /dev/null +++ b/Documentation/admin-guide/media/zoran-cardlist.rst @@ -0,0 +1,51 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Zoran cards list +================ + +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI subsystem IDs + + * - 0 + - DC10(old) + - <any> + + * - 1 + - DC10(new) + - <any> + + * - 2 + - DC10_PLUS + - 1031:7efe + + * - 3 + - DC30 + - <any> + + * - 4 + - DC30_PLUS + - 1031:d801 + + * - 5 + - LML33 + - <any> + + * - 6 + - LML33R10 + - 12f8:8a02 + + * - 7 + - Buz + - 13ca:4231 + + * - 8 + - 6-Eyes + - <any> diff --git a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst index 015a5f7d7854..f7b1c7462991 100644 --- a/Documentation/admin-guide/mm/hugetlbpage.rst +++ b/Documentation/admin-guide/mm/hugetlbpage.rst @@ -131,7 +131,7 @@ hugepages parameter is preceded by an invalid hugepagesz parameter, it will be ignored. default_hugepagesz - pecify the default huge page size. This parameter can + Specify the default huge page size. This parameter can only be specified once on the command line. default_hugepagesz can optionally be followed by the hugepages parameter to preallocate a specific number of huge pages of default size. The number of default diff --git a/Documentation/admin-guide/mm/numaperf.rst b/Documentation/admin-guide/mm/numaperf.rst index 4d69ef1de830..86f2a3c4b638 100644 --- a/Documentation/admin-guide/mm/numaperf.rst +++ b/Documentation/admin-guide/mm/numaperf.rst @@ -56,6 +56,11 @@ nodes' access characteristics share the same performance relative to other linked initiator nodes. Each target within an initiator's access class, though, do not necessarily perform the same as each other. +The access class "1" is used to allow differentiation between initiators +that are CPUs and hence suitable for generic task scheduling, and +IO initiators such as GPUs and NICs. Unlike access class 0, only +nodes containing CPUs are considered. + ================ NUMA Performance ================ @@ -88,6 +93,9 @@ The latency attributes are provided in nanoseconds. The values reported here correspond to the rated latency and bandwidth for the platform. +Access class 1 takes the same form but only includes values for CPU to +memory activity. + ========== NUMA Cache ========== diff --git a/Documentation/admin-guide/nfs/fault_injection.rst b/Documentation/admin-guide/nfs/fault_injection.rst deleted file mode 100644 index eb029c0c15ce..000000000000 --- a/Documentation/admin-guide/nfs/fault_injection.rst +++ /dev/null @@ -1,70 +0,0 @@ -=================== -NFS Fault Injection -=================== - -Fault injection is a method for forcing errors that may not normally occur, or -may be difficult to reproduce. Forcing these errors in a controlled environment -can help the developer find and fix bugs before their code is shipped in a -production system. Injecting an error on the Linux NFS server will allow us to -observe how the client reacts and if it manages to recover its state correctly. - -NFSD_FAULT_INJECTION must be selected when configuring the kernel to use this -feature. - - -Using Fault Injection -===================== -On the client, mount the fault injection server through NFS v4.0+ and do some -work over NFS (open files, take locks, ...). - -On the server, mount the debugfs filesystem to <debug_dir> and ls -<debug_dir>/nfsd. This will show a list of files that will be used for -injecting faults on the NFS server. As root, write a number n to the file -corresponding to the action you want the server to take. The server will then -process the first n items it finds. So if you want to forget 5 locks, echo '5' -to <debug_dir>/nfsd/forget_locks. A value of 0 will tell the server to forget -all corresponding items. A log message will be created containing the number -of items forgotten (check dmesg). - -Go back to work on the client and check if the client recovered from the error -correctly. - - -Available Faults -================ -forget_clients: - The NFS server keeps a list of clients that have placed a mount call. If - this list is cleared, the server will have no knowledge of who the client - is, forcing the client to reauthenticate with the server. - -forget_openowners: - The NFS server keeps a list of what files are currently opened and who - they were opened by. Clearing this list will force the client to reopen - its files. - -forget_locks: - The NFS server keeps a list of what files are currently locked in the VFS. - Clearing this list will force the client to reclaim its locks (files are - unlocked through the VFS as they are cleared from this list). - -forget_delegations: - A delegation is used to assure the client that a file, or part of a file, - has not changed since the delegation was awarded. Clearing this list will - force the client to reacquire its delegation before accessing the file - again. - -recall_delegations: - Delegations can be recalled by the server when another client attempts to - access a file. This test will notify the client that its delegation has - been revoked, forcing the client to reacquire the delegation before using - the file again. - - -tools/nfs/inject_faults.sh script -================================= -This script has been created to ease the fault injection process. This script -will detect the mounted debugfs directory and write to the files located there -based on the arguments passed by the user. For example, running -`inject_faults.sh forget_locks 1` as root will instruct the server to forget -one lock. Running `inject_faults forget_locks` will instruct the server to -forgetall locks. diff --git a/Documentation/admin-guide/nfs/index.rst b/Documentation/admin-guide/nfs/index.rst index 6b5a3c90fac5..3601a708f333 100644 --- a/Documentation/admin-guide/nfs/index.rst +++ b/Documentation/admin-guide/nfs/index.rst @@ -12,4 +12,3 @@ NFS nfs-idmapper pnfs-block-server pnfs-scsi-server - fault_injection diff --git a/Documentation/admin-guide/perf/arm-cmn.rst b/Documentation/admin-guide/perf/arm-cmn.rst new file mode 100644 index 000000000000..0e4809346014 --- /dev/null +++ b/Documentation/admin-guide/perf/arm-cmn.rst @@ -0,0 +1,65 @@ +============================= +Arm Coherent Mesh Network PMU +============================= + +CMN-600 is a configurable mesh interconnect consisting of a rectangular +grid of crosspoints (XPs), with each crosspoint supporting up to two +device ports to which various AMBA CHI agents are attached. + +CMN implements a distributed PMU design as part of its debug and trace +functionality. This consists of a local monitor (DTM) at every XP, which +counts up to 4 event signals from the connected device nodes and/or the +XP itself. Overflow from these local counters is accumulated in up to 8 +global counters implemented by the main controller (DTC), which provides +overall PMU control and interrupts for global counter overflow. + +PMU events +---------- + +The PMU driver registers a single PMU device for the whole interconnect, +see /sys/bus/event_source/devices/arm_cmn. Multi-chip systems may link +more than one CMN together via external CCIX links - in this situation, +each mesh counts its own events entirely independently, and additional +PMU devices will be named arm_cmn_{1..n}. + +Most events are specified in a format based directly on the TRM +definitions - "type" selects the respective node type, and "eventid" the +event number. Some events require an additional occupancy ID, which is +specified by "occupid". + +* Since RN-D nodes do not have any distinct events from RN-I nodes, they + are treated as the same type (0xa), and the common event templates are + named "rnid_*". + +* The cycle counter is treated as a synthetic event belonging to the DTC + node ("type" == 0x3, "eventid" is ignored). + +* XP events also encode the port and channel in the "eventid" field, to + match the underlying pmu_event0_id encoding for the pmu_event_sel + register. The event templates are named with prefixes to cover all + permutations. + +By default each event provides an aggregate count over all nodes of the +given type. To target a specific node, "bynodeid" must be set to 1 and +"nodeid" to the appropriate value derived from the CMN configuration +(as defined in the "Node ID Mapping" section of the TRM). + +Watchpoints +----------- + +The PMU can also count watchpoint events to monitor specific flit +traffic. Watchpoints are treated as a synthetic event type, and like PMU +events can be global or targeted with a particular XP's "nodeid" value. +Since the watchpoint direction is otherwise implicit in the underlying +register selection, separate events are provided for flit uploads and +downloads. + +The flit match value and mask are passed in config1 and config2 ("val" +and "mask" respectively). "wp_dev_sel", "wp_chn_sel", "wp_grp" and +"wp_exclusive" are specified per the TRM definitions for dtm_wp_config0. +Where a watchpoint needs to match fields from both match groups on the +REQ or SNP channel, it can be specified as two events - one for each +group - with the same nonzero "combine" value. The count for such a +pair of combined events will be attributed to the primary match. +Watchpoint events with a "combine" value of 0 are considered independent +and will count individually. diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst index 47c99f40cc16..5a8f2529a033 100644 --- a/Documentation/admin-guide/perf/index.rst +++ b/Documentation/admin-guide/perf/index.rst @@ -12,6 +12,7 @@ Performance monitor support qcom_l2_pmu qcom_l3_pmu arm-ccn + arm-cmn xgene-pmu arm_dsu_pmu thunderx2-pmu diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst index 368e612145d2..6adb7988e0eb 100644 --- a/Documentation/admin-guide/pm/cpufreq.rst +++ b/Documentation/admin-guide/pm/cpufreq.rst @@ -1,7 +1,6 @@ .. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> -.. |struct cpufreq_policy| replace:: :c:type:`struct cpufreq_policy <cpufreq_policy>` .. |intel_pstate| replace:: :doc:`intel_pstate <intel_pstate>` ======================= @@ -92,16 +91,16 @@ control the P-state of multiple CPUs at the same time and writing to it affects all of those CPUs simultaneously. Sets of CPUs sharing hardware P-state control interfaces are represented by -``CPUFreq`` as |struct cpufreq_policy| objects. For consistency, -|struct cpufreq_policy| is also used when there is only one CPU in the given +``CPUFreq`` as struct cpufreq_policy objects. For consistency, +struct cpufreq_policy is also used when there is only one CPU in the given set. -The ``CPUFreq`` core maintains a pointer to a |struct cpufreq_policy| object for +The ``CPUFreq`` core maintains a pointer to a struct cpufreq_policy object for every CPU in the system, including CPUs that are currently offline. If multiple CPUs share the same hardware P-state control interface, all of the pointers -corresponding to them point to the same |struct cpufreq_policy| object. +corresponding to them point to the same struct cpufreq_policy object. -``CPUFreq`` uses |struct cpufreq_policy| as its basic data type and the design +``CPUFreq`` uses struct cpufreq_policy as its basic data type and the design of its user space interface is based on the policy concept. diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst index a96a423e3779..37940a0584ec 100644 --- a/Documentation/admin-guide/pm/cpuidle.rst +++ b/Documentation/admin-guide/pm/cpuidle.rst @@ -528,6 +528,10 @@ object corresponding to it, as follows: Total number of times the hardware has been asked by the given CPU to enter this idle state. +``rejected`` + Total number of times a request to enter this idle state on the given + CPU was rejected. + The :file:`desc` and :file:`name` files both contain strings. The difference between them is that the name is expected to be more concise, while the description may be longer and it may contain white space or special characters. @@ -572,6 +576,11 @@ particular case. For these reasons, the only reliable way to find out how much time has been spent by the hardware in different idle states supported by it is to use idle state residency counters in the hardware, if available. +Generally, an interrupt received when trying to enter an idle state causes the +idle state entry request to be rejected, in which case the ``CPUIdle`` driver +may return an error code to indicate that this was the case. The :file:`usage` +and :file:`rejected` files report the number of times the given idle state +was entered successfully or rejected, respectively. .. _cpu-pm-qos: @@ -690,7 +699,7 @@ which of the two parameters is added to the kernel command line. In the instruction of the CPUs (which, as a rule, suspends the execution of the program and causes the hardware to attempt to enter the shallowest available idle state) for this purpose, and if ``idle=poll`` is used, idle CPUs will execute a -more or less ``lightweight'' sequence of instructions in a tight loop. [Note +more or less "lightweight" sequence of instructions in a tight loop. [Note that using ``idle=poll`` is somewhat drastic in many cases, as preventing idle CPUs from saving almost any energy at all may not be the only effect of it. For example, on Intel hardware it effectively prevents CPUs from using diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index cdd1a9a7f9a2..5072e7064d13 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -123,7 +123,9 @@ Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's internal P-state selection logic is expected to focus entirely on performance. This will override the EPP/EPB setting coming from the ``sysfs`` interface -(see `Energy vs Performance Hints`_ below). +(see `Energy vs Performance Hints`_ below). Moreover, any attempts to change +the EPP/EPB to a value different from 0 ("performance") via ``sysfs`` in this +configuration will be rejected. Also, in this configuration the range of P-states available to the processor's internal P-state selection logic is always restricted to the upper boundary diff --git a/Documentation/admin-guide/pnp.rst b/Documentation/admin-guide/pnp.rst index bab2d10631f0..3eda08191d13 100644 --- a/Documentation/admin-guide/pnp.rst +++ b/Documentation/admin-guide/pnp.rst @@ -281,10 +281,6 @@ ISAPNP drivers. They should serve as a temporary solution only. They are as follows:: - struct pnp_card *pnp_find_card(unsigned short vendor, - unsigned short device, - struct pnp_card *from) - struct pnp_dev *pnp_find_dev(struct pnp_card *card, unsigned short vendor, unsigned short function, diff --git a/Documentation/admin-guide/pstore-blk.rst b/Documentation/admin-guide/pstore-blk.rst index 296d5027787a..6898aba9fb5c 100644 --- a/Documentation/admin-guide/pstore-blk.rst +++ b/Documentation/admin-guide/pstore-blk.rst @@ -154,17 +154,11 @@ Configurations for driver Only a block device driver cares about these configurations. A block device driver uses ``register_pstore_blk`` to register to pstore/blk. -.. kernel-doc:: fs/pstore/blk.c - :identifiers: register_pstore_blk - A non-block device driver uses ``register_pstore_device`` with ``struct pstore_device_info`` to register to pstore/blk. .. kernel-doc:: fs/pstore/blk.c - :identifiers: register_pstore_device - -.. kernel-doc:: include/linux/pstore_blk.h - :identifiers: pstore_device_info + :export: Compression and header ---------------------- @@ -237,7 +231,7 @@ For developer reference, here are all the important structures and APIs: :internal: .. kernel-doc:: fs/pstore/blk.c - :export: + :internal: .. kernel-doc:: include/linux/pstore_blk.h :internal: diff --git a/Documentation/admin-guide/svga.rst b/Documentation/admin-guide/svga.rst index b6c2f9acca92..9eb1e0738e84 100644 --- a/Documentation/admin-guide/svga.rst +++ b/Documentation/admin-guide/svga.rst @@ -12,7 +12,8 @@ Intro This small document describes the "Video Mode Selection" feature which allows the use of various special video modes supported by the video BIOS. Due to usage of the BIOS, the selection is limited to boot time (before the -kernel decompression starts) and works only on 80X86 machines. +kernel decompression starts) and works only on 80X86 machines that are +booted through BIOS firmware (as opposed to through UEFI, kexec, etc.). .. note:: @@ -23,7 +24,7 @@ kernel decompression starts) and works only on 80X86 machines. The video mode to be used is selected by a kernel parameter which can be specified in the kernel Makefile (the SVGA_MODE=... line) or by the "vga=..." -option of LILO (or some other boot loader you use) or by the "vidmode" utility +option of LILO (or some other boot loader you use) or by the "xrandr" utility (present in standard Linux utility packages). You can use the following values of this parameter:: @@ -41,7 +42,7 @@ of this parameter:: better to use absolute mode numbers instead. 0x.... - Hexadecimal video mode ID (also displayed on the menu, see below - for exact meaning of the ID). Warning: rdev and LILO don't support + for exact meaning of the ID). Warning: LILO doesn't support hexadecimal numbers -- you have to convert it to decimal manually. Menu diff --git a/Documentation/admin-guide/sysctl/abi.rst b/Documentation/admin-guide/sysctl/abi.rst index 599bcde7f0b7..ac87eafdb54f 100644 --- a/Documentation/admin-guide/sysctl/abi.rst +++ b/Documentation/admin-guide/sysctl/abi.rst @@ -1,67 +1,34 @@ +.. SPDX-License-Identifier: GPL-2.0+ + ================================ Documentation for /proc/sys/abi/ ================================ -kernel version 2.6.0.test2 +.. See scripts/check-sysctl-docs to keep this up to date: +.. scripts/check-sysctl-docs -vtable="abi" \ +.. Documentation/admin-guide/sysctl/abi.rst \ +.. $(git grep -l register_sysctl_) -Copyright (c) 2003, Fabian Frederick <ffrederick@users.sourceforge.net> +Copyright (c) 2020, Stephen Kitt -For general info: index.rst. +For general info, see :doc:`index`. ------------------------------------------------------------------------------ -This path is binary emulation relevant aka personality types aka abi. -When a process is executed, it's linked to an exec_domain whose -personality is defined using values available from /proc/sys/abi. -You can find further details about abi in include/linux/personality.h. - -Here are the files featuring in 2.6 kernel: - -- defhandler_coff -- defhandler_elf -- defhandler_lcall7 -- defhandler_libcso -- fake_utsname -- trace - -defhandler_coff ---------------- - -defined value: - PER_SCOSVR3:: - - 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS | SHORT_INODE - -defhandler_elf --------------- - -defined value: - PER_LINUX:: - - 0 - -defhandler_lcall7 ------------------ - -defined value : - PER_SVR4:: - - 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO, - -defhandler_libsco ------------------ - -defined value: - PER_SVR4:: +The files in ``/proc/sys/abi`` can be used to see and modify +ABI-related settings. - 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO, +Currently, these files might (depending on your configuration) +show up in ``/proc/sys/kernel``: -fake_utsname ------------- +.. contents:: :local: -Unused +vsyscall32 (x86) +================ -trace ------ +Determines whether the kernels maps a vDSO page into 32-bit processes; +can be set to 1 to enable, or 0 to disable. Defaults to enabled if +``CONFIG_COMPAT_VDSO`` is set, disabled otherwide. -Unused +This controls the same setting as the ``vdso32`` kernel boot +parameter. diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst index 42cd04bca548..57fd6ce68fe0 100644 --- a/Documentation/admin-guide/sysctl/net.rst +++ b/Documentation/admin-guide/sysctl/net.rst @@ -300,7 +300,6 @@ Note: 0: 0 1 2 3 4 5 6 7 RSS hash key: 84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8:43:e3:c9:0c:fd:17:55:c2:3a:4d:69:ed:f1:42:89 - netdev_tstamp_prequeue ---------------------- @@ -321,11 +320,20 @@ fb_tunnels_only_for_init_net ---------------------------- Controls if fallback tunnels (like tunl0, gre0, gretap0, erspan0, -sit0, ip6tnl0, ip6gre0) are automatically created when a new -network namespace is created, if corresponding tunnel is present -in initial network namespace. -If set to 1, these devices are not automatically created, and -user space is responsible for creating them if needed. +sit0, ip6tnl0, ip6gre0) are automatically created. There are 3 possibilities +(a) value = 0; respective fallback tunnels are created when module is +loaded in every net namespaces (backward compatible behavior). +(b) value = 1; [kcmd value: initns] respective fallback tunnels are +created only in init net namespace and every other net namespace will +not have them. +(c) value = 2; [kcmd value: none] fallback tunnels are not created +when a module is loaded in any of the net namespace. Setting value to +"2" is pointless after boot if these modules are built-in, so there is +a kernel command-line option that can change this default. Please refer to +Documentation/admin-guide/kernel-parameters.txt for additional details. + +Not creating fallback tunnels gives control to userspace to create +whatever is needed only and avoid creating devices which are redundant. Default : 0 (for compatibility reasons) diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst index 4b9d2e8e9142..f455fa00c00f 100644 --- a/Documentation/admin-guide/sysctl/vm.rst +++ b/Documentation/admin-guide/sysctl/vm.rst @@ -27,6 +27,7 @@ Currently, these files are in /proc/sys/vm: - admin_reserve_kbytes - block_dump - compact_memory +- compaction_proactiveness - compact_unevictable_allowed - dirty_background_bytes - dirty_background_ratio @@ -37,6 +38,7 @@ Currently, these files are in /proc/sys/vm: - dirty_writeback_centisecs - drop_caches - extfrag_threshold +- highmem_is_dirtyable - hugetlb_shm_group - laptop_mode - legacy_va_layout diff --git a/Documentation/admin-guide/sysrq.rst b/Documentation/admin-guide/sysrq.rst index e6424d8c5846..67dfa4c29093 100644 --- a/Documentation/admin-guide/sysrq.rst +++ b/Documentation/admin-guide/sysrq.rst @@ -79,6 +79,8 @@ On all echo t > /proc/sysrq-trigger +The :kbd:`<command key>` is case sensitive. + What are the 'command' keys? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/admin-guide/tainted-kernels.rst b/Documentation/admin-guide/tainted-kernels.rst index abf804719890..f718a2eaf1f6 100644 --- a/Documentation/admin-guide/tainted-kernels.rst +++ b/Documentation/admin-guide/tainted-kernels.rst @@ -130,7 +130,7 @@ More detailed explanation for tainting 5) ``B`` If a page-release function has found a bad page reference or some unexpected page flags. This indicates a hardware problem or a kernel bug; there should be other information in the log indicating why this tainting - occured. + occurred. 6) ``U`` if a user or user application specifically requested that the Tainted flag be set, ``' '`` otherwise. diff --git a/Documentation/admin-guide/xfs.rst b/Documentation/admin-guide/xfs.rst index f461d6c33534..86de8a1ad91c 100644 --- a/Documentation/admin-guide/xfs.rst +++ b/Documentation/admin-guide/xfs.rst @@ -210,6 +210,28 @@ When mounting an XFS filesystem, the following options are accepted. inconsistent namespace presentation during or after a failover event. +Deprecation of V4 Format +======================== + +The V4 filesystem format lacks certain features that are supported by +the V5 format, such as metadata checksumming, strengthened metadata +verification, and the ability to store timestamps past the year 2038. +Because of this, the V4 format is deprecated. All users should upgrade +by backing up their files, reformatting, and restoring from the backup. + +Administrators and users can detect a V4 filesystem by running xfs_info +against a filesystem mountpoint and checking for a string containing +"crc=". If no such string is found, please upgrade xfsprogs to the +latest version and try again. + +The deprecation will take place in two parts. Support for mounting V4 +filesystems can now be disabled at kernel build time via Kconfig option. +The option will default to yes until September 2025, at which time it +will be changed to default to no. In September 2030, support will be +removed from the codebase entirely. + +Note: Distributors may choose to withdraw V4 format support earlier than +the dates listed above. Deprecated Mount Options ======================== @@ -217,6 +239,9 @@ Deprecated Mount Options =========================== ================ Name Removal Schedule =========================== ================ +Mounting with V4 filesystem September 2030 +ikeep/noikeep September 2025 +attr2/noattr2 September 2025 =========================== ================ @@ -331,7 +356,12 @@ The following sysctls are available for the XFS filesystem: Deprecated Sysctls ================== -None at present. +=========================== ================ + Name Removal Schedule +=========================== ================ +fs.xfs.irix_sgid_inherit September 2025 +fs.xfs.irix_symlink_mode September 2025 +=========================== ================ Removed Sysctls diff --git a/Documentation/arm/sunxi.rst b/Documentation/arm/sunxi.rst index b037428aee98..62b533d0ba94 100644 --- a/Documentation/arm/sunxi.rst +++ b/Documentation/arm/sunxi.rst @@ -108,7 +108,7 @@ SunXi family * Datasheet - http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf + https://linux-sunxi.org/images/4/4b/Allwinner_H3_Datasheet_V1.2.pdf - Allwinner R40 (sun8i) diff --git a/Documentation/arm/uefi.rst b/Documentation/arm/uefi.rst index f868330df6be..f732f957421f 100644 --- a/Documentation/arm/uefi.rst +++ b/Documentation/arm/uefi.rst @@ -23,7 +23,7 @@ makes it possible for the kernel to support additional features: For actually enabling [U]EFI support, enable: - CONFIG_EFI=y -- CONFIG_EFI_VARS=y or m +- CONFIG_EFIVAR_FS=y or m The implementation depends on receiving information about the UEFI environment in a Flattened Device Tree (FDT) - so is only available with CONFIG_OF. diff --git a/Documentation/arm64/amu.rst b/Documentation/arm64/amu.rst index 452ec8b115c2..01f2de2b0450 100644 --- a/Documentation/arm64/amu.rst +++ b/Documentation/arm64/amu.rst @@ -1,3 +1,5 @@ +.. _amu_index: + ======================================================= Activity Monitors Unit (AMU) extension in AArch64 Linux ======================================================= diff --git a/Documentation/arm64/cpu-feature-registers.rst b/Documentation/arm64/cpu-feature-registers.rst index f28853f80089..328e0c454fbd 100644 --- a/Documentation/arm64/cpu-feature-registers.rst +++ b/Documentation/arm64/cpu-feature-registers.rst @@ -175,6 +175,8 @@ infrastructure: +------------------------------+---------+---------+ | Name | bits | visible | +------------------------------+---------+---------+ + | MTE | [11-8] | y | + +------------------------------+---------+---------+ | SSBS | [7-4] | y | +------------------------------+---------+---------+ | BT | [3-0] | y | diff --git a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst index 84a9fd2d41b4..bbd9cf54db6c 100644 --- a/Documentation/arm64/elf_hwcaps.rst +++ b/Documentation/arm64/elf_hwcaps.rst @@ -240,6 +240,10 @@ HWCAP2_BTI Functionality implied by ID_AA64PFR0_EL1.BT == 0b0001. +HWCAP2_MTE + + Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described + by Documentation/arm64/memory-tagging-extension.rst. 4. Unused AT_HWCAP bits ----------------------- diff --git a/Documentation/arm64/hugetlbpage.rst b/Documentation/arm64/hugetlbpage.rst index b44f939e5210..a110124c11e3 100644 --- a/Documentation/arm64/hugetlbpage.rst +++ b/Documentation/arm64/hugetlbpage.rst @@ -1,3 +1,5 @@ +.. _hugetlbpage_index: + ==================== HugeTLBpage on ARM64 ==================== diff --git a/Documentation/arm64/index.rst b/Documentation/arm64/index.rst index d9665d83c53a..937634c49979 100644 --- a/Documentation/arm64/index.rst +++ b/Documentation/arm64/index.rst @@ -1,3 +1,5 @@ +.. _arm64_index: + ================== ARM64 Architecture ================== @@ -14,6 +16,7 @@ ARM64 Architecture hugetlbpage legacy_instructions memory + memory-tagging-extension perf pointer-authentication silicon-errata diff --git a/Documentation/arm64/memory-tagging-extension.rst b/Documentation/arm64/memory-tagging-extension.rst new file mode 100644 index 000000000000..034d37c605e8 --- /dev/null +++ b/Documentation/arm64/memory-tagging-extension.rst @@ -0,0 +1,305 @@ +=============================================== +Memory Tagging Extension (MTE) in AArch64 Linux +=============================================== + +Authors: Vincenzo Frascino <vincenzo.frascino@arm.com> + Catalin Marinas <catalin.marinas@arm.com> + +Date: 2020-02-25 + +This document describes the provision of the Memory Tagging Extension +functionality in AArch64 Linux. + +Introduction +============ + +ARMv8.5 based processors introduce the Memory Tagging Extension (MTE) +feature. MTE is built on top of the ARMv8.0 virtual address tagging TBI +(Top Byte Ignore) feature and allows software to access a 4-bit +allocation tag for each 16-byte granule in the physical address space. +Such memory range must be mapped with the Normal-Tagged memory +attribute. A logical tag is derived from bits 59-56 of the virtual +address used for the memory access. A CPU with MTE enabled will compare +the logical tag against the allocation tag and potentially raise an +exception on mismatch, subject to system registers configuration. + +Userspace Support +================= + +When ``CONFIG_ARM64_MTE`` is selected and Memory Tagging Extension is +supported by the hardware, the kernel advertises the feature to +userspace via ``HWCAP2_MTE``. + +PROT_MTE +-------- + +To access the allocation tags, a user process must enable the Tagged +memory attribute on an address range using a new ``prot`` flag for +``mmap()`` and ``mprotect()``: + +``PROT_MTE`` - Pages allow access to the MTE allocation tags. + +The allocation tag is set to 0 when such pages are first mapped in the +user address space and preserved on copy-on-write. ``MAP_SHARED`` is +supported and the allocation tags can be shared between processes. + +**Note**: ``PROT_MTE`` is only supported on ``MAP_ANONYMOUS`` and +RAM-based file mappings (``tmpfs``, ``memfd``). Passing it to other +types of mapping will result in ``-EINVAL`` returned by these system +calls. + +**Note**: The ``PROT_MTE`` flag (and corresponding memory type) cannot +be cleared by ``mprotect()``. + +**Note**: ``madvise()`` memory ranges with ``MADV_DONTNEED`` and +``MADV_FREE`` may have the allocation tags cleared (set to 0) at any +point after the system call. + +Tag Check Faults +---------------- + +When ``PROT_MTE`` is enabled on an address range and a mismatch between +the logical and allocation tags occurs on access, there are three +configurable behaviours: + +- *Ignore* - This is the default mode. The CPU (and kernel) ignores the + tag check fault. + +- *Synchronous* - The kernel raises a ``SIGSEGV`` synchronously, with + ``.si_code = SEGV_MTESERR`` and ``.si_addr = <fault-address>``. The + memory access is not performed. If ``SIGSEGV`` is ignored or blocked + by the offending thread, the containing process is terminated with a + ``coredump``. + +- *Asynchronous* - The kernel raises a ``SIGSEGV``, in the offending + thread, asynchronously following one or multiple tag check faults, + with ``.si_code = SEGV_MTEAERR`` and ``.si_addr = 0`` (the faulting + address is unknown). + +The user can select the above modes, per thread, using the +``prctl(PR_SET_TAGGED_ADDR_CTRL, flags, 0, 0, 0)`` system call where +``flags`` contain one of the following values in the ``PR_MTE_TCF_MASK`` +bit-field: + +- ``PR_MTE_TCF_NONE`` - *Ignore* tag check faults +- ``PR_MTE_TCF_SYNC`` - *Synchronous* tag check fault mode +- ``PR_MTE_TCF_ASYNC`` - *Asynchronous* tag check fault mode + +The current tag check fault mode can be read using the +``prctl(PR_GET_TAGGED_ADDR_CTRL, 0, 0, 0, 0)`` system call. + +Tag checking can also be disabled for a user thread by setting the +``PSTATE.TCO`` bit with ``MSR TCO, #1``. + +**Note**: Signal handlers are always invoked with ``PSTATE.TCO = 0``, +irrespective of the interrupted context. ``PSTATE.TCO`` is restored on +``sigreturn()``. + +**Note**: There are no *match-all* logical tags available for user +applications. + +**Note**: Kernel accesses to the user address space (e.g. ``read()`` +system call) are not checked if the user thread tag checking mode is +``PR_MTE_TCF_NONE`` or ``PR_MTE_TCF_ASYNC``. If the tag checking mode is +``PR_MTE_TCF_SYNC``, the kernel makes a best effort to check its user +address accesses, however it cannot always guarantee it. + +Excluding Tags in the ``IRG``, ``ADDG`` and ``SUBG`` instructions +----------------------------------------------------------------- + +The architecture allows excluding certain tags to be randomly generated +via the ``GCR_EL1.Exclude`` register bit-field. By default, Linux +excludes all tags other than 0. A user thread can enable specific tags +in the randomly generated set using the ``prctl(PR_SET_TAGGED_ADDR_CTRL, +flags, 0, 0, 0)`` system call where ``flags`` contains the tags bitmap +in the ``PR_MTE_TAG_MASK`` bit-field. + +**Note**: The hardware uses an exclude mask but the ``prctl()`` +interface provides an include mask. An include mask of ``0`` (exclusion +mask ``0xffff``) results in the CPU always generating tag ``0``. + +Initial process state +--------------------- + +On ``execve()``, the new process has the following configuration: + +- ``PR_TAGGED_ADDR_ENABLE`` set to 0 (disabled) +- Tag checking mode set to ``PR_MTE_TCF_NONE`` +- ``PR_MTE_TAG_MASK`` set to 0 (all tags excluded) +- ``PSTATE.TCO`` set to 0 +- ``PROT_MTE`` not set on any of the initial memory maps + +On ``fork()``, the new process inherits the parent's configuration and +memory map attributes with the exception of the ``madvise()`` ranges +with ``MADV_WIPEONFORK`` which will have the data and tags cleared (set +to 0). + +The ``ptrace()`` interface +-------------------------- + +``PTRACE_PEEKMTETAGS`` and ``PTRACE_POKEMTETAGS`` allow a tracer to read +the tags from or set the tags to a tracee's address space. The +``ptrace()`` system call is invoked as ``ptrace(request, pid, addr, +data)`` where: + +- ``request`` - one of ``PTRACE_PEEKMTETAGS`` or ``PTRACE_POKEMTETAGS``. +- ``pid`` - the tracee's PID. +- ``addr`` - address in the tracee's address space. +- ``data`` - pointer to a ``struct iovec`` where ``iov_base`` points to + a buffer of ``iov_len`` length in the tracer's address space. + +The tags in the tracer's ``iov_base`` buffer are represented as one +4-bit tag per byte and correspond to a 16-byte MTE tag granule in the +tracee's address space. + +**Note**: If ``addr`` is not aligned to a 16-byte granule, the kernel +will use the corresponding aligned address. + +``ptrace()`` return value: + +- 0 - tags were copied, the tracer's ``iov_len`` was updated to the + number of tags transferred. This may be smaller than the requested + ``iov_len`` if the requested address range in the tracee's or the + tracer's space cannot be accessed or does not have valid tags. +- ``-EPERM`` - the specified process cannot be traced. +- ``-EIO`` - the tracee's address range cannot be accessed (e.g. invalid + address) and no tags copied. ``iov_len`` not updated. +- ``-EFAULT`` - fault on accessing the tracer's memory (``struct iovec`` + or ``iov_base`` buffer) and no tags copied. ``iov_len`` not updated. +- ``-EOPNOTSUPP`` - the tracee's address does not have valid tags (never + mapped with the ``PROT_MTE`` flag). ``iov_len`` not updated. + +**Note**: There are no transient errors for the requests above, so user +programs should not retry in case of a non-zero system call return. + +``PTRACE_GETREGSET`` and ``PTRACE_SETREGSET`` with ``addr == +``NT_ARM_TAGGED_ADDR_CTRL`` allow ``ptrace()`` access to the tagged +address ABI control and MTE configuration of a process as per the +``prctl()`` options described in +Documentation/arm64/tagged-address-abi.rst and above. The corresponding +``regset`` is 1 element of 8 bytes (``sizeof(long))``). + +Example of correct usage +======================== + +*MTE Example code* + +.. code-block:: c + + /* + * To be compiled with -march=armv8.5-a+memtag + */ + #include <errno.h> + #include <stdint.h> + #include <stdio.h> + #include <stdlib.h> + #include <unistd.h> + #include <sys/auxv.h> + #include <sys/mman.h> + #include <sys/prctl.h> + + /* + * From arch/arm64/include/uapi/asm/hwcap.h + */ + #define HWCAP2_MTE (1 << 18) + + /* + * From arch/arm64/include/uapi/asm/mman.h + */ + #define PROT_MTE 0x20 + + /* + * From include/uapi/linux/prctl.h + */ + #define PR_SET_TAGGED_ADDR_CTRL 55 + #define PR_GET_TAGGED_ADDR_CTRL 56 + # define PR_TAGGED_ADDR_ENABLE (1UL << 0) + # define PR_MTE_TCF_SHIFT 1 + # define PR_MTE_TCF_NONE (0UL << PR_MTE_TCF_SHIFT) + # define PR_MTE_TCF_SYNC (1UL << PR_MTE_TCF_SHIFT) + # define PR_MTE_TCF_ASYNC (2UL << PR_MTE_TCF_SHIFT) + # define PR_MTE_TCF_MASK (3UL << PR_MTE_TCF_SHIFT) + # define PR_MTE_TAG_SHIFT 3 + # define PR_MTE_TAG_MASK (0xffffUL << PR_MTE_TAG_SHIFT) + + /* + * Insert a random logical tag into the given pointer. + */ + #define insert_random_tag(ptr) ({ \ + uint64_t __val; \ + asm("irg %0, %1" : "=r" (__val) : "r" (ptr)); \ + __val; \ + }) + + /* + * Set the allocation tag on the destination address. + */ + #define set_tag(tagged_addr) do { \ + asm volatile("stg %0, [%0]" : : "r" (tagged_addr) : "memory"); \ + } while (0) + + int main() + { + unsigned char *a; + unsigned long page_sz = sysconf(_SC_PAGESIZE); + unsigned long hwcap2 = getauxval(AT_HWCAP2); + + /* check if MTE is present */ + if (!(hwcap2 & HWCAP2_MTE)) + return EXIT_FAILURE; + + /* + * Enable the tagged address ABI, synchronous MTE tag check faults and + * allow all non-zero tags in the randomly generated set. + */ + if (prctl(PR_SET_TAGGED_ADDR_CTRL, + PR_TAGGED_ADDR_ENABLE | PR_MTE_TCF_SYNC | (0xfffe << PR_MTE_TAG_SHIFT), + 0, 0, 0)) { + perror("prctl() failed"); + return EXIT_FAILURE; + } + + a = mmap(0, page_sz, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + if (a == MAP_FAILED) { + perror("mmap() failed"); + return EXIT_FAILURE; + } + + /* + * Enable MTE on the above anonymous mmap. The flag could be passed + * directly to mmap() and skip this step. + */ + if (mprotect(a, page_sz, PROT_READ | PROT_WRITE | PROT_MTE)) { + perror("mprotect() failed"); + return EXIT_FAILURE; + } + + /* access with the default tag (0) */ + a[0] = 1; + a[1] = 2; + + printf("a[0] = %hhu a[1] = %hhu\n", a[0], a[1]); + + /* set the logical and allocation tags */ + a = (unsigned char *)insert_random_tag(a); + set_tag(a); + + printf("%p\n", a); + + /* non-zero tag access */ + a[0] = 3; + printf("a[0] = %hhu a[1] = %hhu\n", a[0], a[1]); + + /* + * If MTE is enabled correctly the next instruction will generate an + * exception. + */ + printf("Expecting SIGSEGV...\n"); + a[16] = 0xdd; + + /* this should not be printed in the PR_MTE_TCF_SYNC mode */ + printf("...haven't got one\n"); + + return EXIT_FAILURE; + } diff --git a/Documentation/block/blk-mq.rst b/Documentation/block/blk-mq.rst index 88c56afcb070..a980d23af48c 100644 --- a/Documentation/block/blk-mq.rst +++ b/Documentation/block/blk-mq.rst @@ -63,10 +63,10 @@ Software staging queues ~~~~~~~~~~~~~~~~~~~~~~~ The block IO subsystem adds requests in the software staging queues -(represented by struct :c:type:`blk_mq_ctx`) in case that they weren't sent +(represented by struct blk_mq_ctx) in case that they weren't sent directly to the driver. A request is one or more BIOs. They arrived at the -block layer through the data structure struct :c:type:`bio`. The block layer -will then build a new structure from it, the struct :c:type:`request` that will +block layer through the data structure struct bio. The block layer +will then build a new structure from it, the struct request that will be used to communicate with the device driver. Each queue has its own lock and the number of queues is defined by a per-CPU or per-node basis. @@ -102,7 +102,7 @@ hardware queue will be drained in sequence according to their mapping. Hardware dispatch queues ~~~~~~~~~~~~~~~~~~~~~~~~ -The hardware queue (represented by struct :c:type:`blk_mq_hw_ctx`) is a struct +The hardware queue (represented by struct blk_mq_hw_ctx) is a struct used by device drivers to map the device submission queues (or device DMA ring buffer), and are the last step of the block layer submission code before the low level device driver taking ownership of the request. To run this queue, the @@ -110,9 +110,9 @@ block layer removes requests from the associated software queues and tries to dispatch to the hardware. If it's not possible to send the requests directly to hardware, they will be -added to a linked list (:c:type:`hctx->dispatch`) of requests. Then, +added to a linked list (``hctx->dispatch``) of requests. Then, next time the block layer runs a queue, it will send the requests laying at the -:c:type:`dispatch` list first, to ensure a fairness dispatch with those +``dispatch`` list first, to ensure a fairness dispatch with those requests that were ready to be sent first. The number of hardware queues depends on the number of hardware contexts supported by the hardware and its device driver, but it will not be more than the number of cores of the system. diff --git a/Documentation/block/inline-encryption.rst b/Documentation/block/inline-encryption.rst index 354817b80887..e75151e467d3 100644 --- a/Documentation/block/inline-encryption.rst +++ b/Documentation/block/inline-encryption.rst @@ -52,7 +52,7 @@ Constraints and notes Design ====== -We add a :c:type:`struct bio_crypt_ctx` to :c:type:`struct bio` that can +We add a struct bio_crypt_ctx to struct bio that can represent an encryption context, because we need to be able to pass this encryption context from the upper layers (like the fs layer) to the device driver to act upon. @@ -85,7 +85,7 @@ blk-mq changes, other block layer changes and blk-crypto-fallback ================================================================= We add a pointer to a ``bi_crypt_context`` and ``keyslot`` to -:c:type:`struct request`. These will be referred to as the ``crypto fields`` +struct request. These will be referred to as the ``crypto fields`` for the request. This ``keyslot`` is the keyslot into which the ``bi_crypt_context`` has been programmed in the KSM of the ``request_queue`` that this request is being sent to. @@ -118,7 +118,7 @@ of the algorithm being used adheres to spec and functions correctly). If a ``request queue``'s inline encryption hardware claimed to support the encryption context specified with a bio, then it will not be handled by the ``blk-crypto-fallback``. We will eventually reach a point in blk-mq when a -:c:type:`struct request` needs to be allocated for that bio. At that point, +struct request needs to be allocated for that bio. At that point, blk-mq tries to program the encryption context into the ``request_queue``'s keyslot_manager, and obtain a keyslot, which it stores in its newly added ``keyslot`` field. This keyslot is released when the request is completed. @@ -188,7 +188,7 @@ keyslots supported by the hardware. The device driver also needs to tell the KSM how to actually manipulate the IE hardware in the device to do things like programming the crypto key into the IE hardware into a particular keyslot. All this is achieved through the -:c:type:`struct blk_ksm_ll_ops` field in the KSM that the device driver +struct blk_ksm_ll_ops field in the KSM that the device driver must fill up after initing the ``blk_keyslot_manager``. The KSM also handles runtime power management for the device when applicable diff --git a/Documentation/bpf/bpf_devel_QA.rst b/Documentation/bpf/bpf_devel_QA.rst index a26aa1b9b259..5b613d2a5f1a 100644 --- a/Documentation/bpf/bpf_devel_QA.rst +++ b/Documentation/bpf/bpf_devel_QA.rst @@ -60,13 +60,13 @@ Q: Where can I find patches currently under discussion for BPF subsystem? A: All patches that are Cc'ed to netdev are queued for review under netdev patchwork project: - http://patchwork.ozlabs.org/project/netdev/list/ + https://patchwork.kernel.org/project/netdevbpf/list/ Those patches which target BPF, are assigned to a 'bpf' delegate for further processing from BPF maintainers. The current queue with patches under review can be found at: - https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147 + https://patchwork.kernel.org/project/netdevbpf/list/?delegate=121173 Once the patches have been reviewed by the BPF community as a whole and approved by the BPF maintainers, their status in patchwork will be @@ -149,7 +149,7 @@ In case the patch or patch series has to be reworked and sent out again in a second or later revision, it is also required to add a version number (``v2``, ``v3``, ...) into the subject prefix:: - git format-patch --subject-prefix='PATCH net-next v2' start..finish + git format-patch --subject-prefix='PATCH bpf-next v2' start..finish When changes have been requested to the patch series, always send the whole patch series again with the feedback incorporated (never send @@ -479,17 +479,18 @@ LLVM's static compiler lists the supported targets through $ llc --version LLVM (http://llvm.org/): - LLVM version 6.0.0svn + LLVM version 10.0.0 Optimized build. Default target: x86_64-unknown-linux-gnu Host CPU: skylake Registered Targets: - bpf - BPF (host endian) - bpfeb - BPF (big endian) - bpfel - BPF (little endian) - x86 - 32-bit X86: Pentium-Pro and above - x86-64 - 64-bit X86: EM64T and AMD64 + aarch64 - AArch64 (little endian) + bpf - BPF (host endian) + bpfeb - BPF (big endian) + bpfel - BPF (little endian) + x86 - 32-bit X86: Pentium-Pro and above + x86-64 - 64-bit X86: EM64T and AMD64 For developers in order to utilize the latest features added to LLVM's BPF back end, it is advisable to run the latest LLVM releases. Support @@ -517,6 +518,10 @@ from the git repositories:: The built binaries can then be found in the build/bin/ directory, where you can point the PATH variable to. +Set ``-DLLVM_TARGETS_TO_BUILD`` equal to the target you wish to build, you +will find a full list of targets within the llvm-project/llvm/lib/Target +directory. + Q: Reporting LLVM BPF issues ---------------------------- Q: Should I notify BPF kernel maintainers about issues in LLVM's BPF code diff --git a/Documentation/bpf/btf.rst b/Documentation/bpf/btf.rst index b5361b8621c9..44dc789de2b4 100644 --- a/Documentation/bpf/btf.rst +++ b/Documentation/bpf/btf.rst @@ -724,6 +724,31 @@ want to define unused entry in BTF_ID_LIST, like:: BTF_ID_UNUSED BTF_ID(struct, task_struct) +The ``BTF_SET_START/END`` macros pair defines sorted list of BTF ID values +and their count, with following syntax:: + + BTF_SET_START(set) + BTF_ID(type1, name1) + BTF_ID(type2, name2) + BTF_SET_END(set) + +resulting in following layout in .BTF_ids section:: + + __BTF_ID__set__set: + .zero 4 + __BTF_ID__type1__name1__3: + .zero 4 + __BTF_ID__type2__name2__4: + .zero 4 + +The ``struct btf_id_set set;`` variable is defined to access the list. + +The ``typeX`` name can be one of following:: + + struct, union, typedef, func + +and is used as a filter when resolving the BTF ID value. + All the BTF ID lists and sets are compiled in the .BTF_ids section and resolved during the linking phase of kernel build by ``resolve_btfids`` tool. diff --git a/Documentation/bpf/index.rst b/Documentation/bpf/index.rst index 7df2465fd108..4f2874b729c3 100644 --- a/Documentation/bpf/index.rst +++ b/Documentation/bpf/index.rst @@ -52,6 +52,7 @@ Program types prog_cgroup_sysctl prog_flow_dissector bpf_lsm + prog_sk_lookup Map types diff --git a/Documentation/bpf/prog_sk_lookup.rst b/Documentation/bpf/prog_sk_lookup.rst new file mode 100644 index 000000000000..85a305c19bcd --- /dev/null +++ b/Documentation/bpf/prog_sk_lookup.rst @@ -0,0 +1,98 @@ +.. SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +===================== +BPF sk_lookup program +===================== + +BPF sk_lookup program type (``BPF_PROG_TYPE_SK_LOOKUP``) introduces programmability +into the socket lookup performed by the transport layer when a packet is to be +delivered locally. + +When invoked BPF sk_lookup program can select a socket that will receive the +incoming packet by calling the ``bpf_sk_assign()`` BPF helper function. + +Hooks for a common attach point (``BPF_SK_LOOKUP``) exist for both TCP and UDP. + +Motivation +========== + +BPF sk_lookup program type was introduced to address setup scenarios where +binding sockets to an address with ``bind()`` socket call is impractical, such +as: + +1. receiving connections on a range of IP addresses, e.g. 192.0.2.0/24, when + binding to a wildcard address ``INADRR_ANY`` is not possible due to a port + conflict, +2. receiving connections on all or a wide range of ports, i.e. an L7 proxy use + case. + +Such setups would require creating and ``bind()``'ing one socket to each of the +IP address/port in the range, leading to resource consumption and potential +latency spikes during socket lookup. + +Attachment +========== + +BPF sk_lookup program can be attached to a network namespace with +``bpf(BPF_LINK_CREATE, ...)`` syscall using the ``BPF_SK_LOOKUP`` attach type and a +netns FD as attachment ``target_fd``. + +Multiple programs can be attached to one network namespace. Programs will be +invoked in the same order as they were attached. + +Hooks +===== + +The attached BPF sk_lookup programs run whenever the transport layer needs to +find a listening (TCP) or an unconnected (UDP) socket for an incoming packet. + +Incoming traffic to established (TCP) and connected (UDP) sockets is delivered +as usual without triggering the BPF sk_lookup hook. + +The attached BPF programs must return with either ``SK_PASS`` or ``SK_DROP`` +verdict code. As for other BPF program types that are network filters, +``SK_PASS`` signifies that the socket lookup should continue on to regular +hashtable-based lookup, while ``SK_DROP`` causes the transport layer to drop the +packet. + +A BPF sk_lookup program can also select a socket to receive the packet by +calling ``bpf_sk_assign()`` BPF helper. Typically, the program looks up a socket +in a map holding sockets, such as ``SOCKMAP`` or ``SOCKHASH``, and passes a +``struct bpf_sock *`` to ``bpf_sk_assign()`` helper to record the +selection. Selecting a socket only takes effect if the program has terminated +with ``SK_PASS`` code. + +When multiple programs are attached, the end result is determined from return +codes of all the programs according to the following rules: + +1. If any program returned ``SK_PASS`` and selected a valid socket, the socket + is used as the result of the socket lookup. +2. If more than one program returned ``SK_PASS`` and selected a socket, the last + selection takes effect. +3. If any program returned ``SK_DROP``, and no program returned ``SK_PASS`` and + selected a socket, socket lookup fails. +4. If all programs returned ``SK_PASS`` and none of them selected a socket, + socket lookup continues on. + +API +=== + +In its context, an instance of ``struct bpf_sk_lookup``, BPF sk_lookup program +receives information about the packet that triggered the socket lookup. Namely: + +* IP version (``AF_INET`` or ``AF_INET6``), +* L4 protocol identifier (``IPPROTO_TCP`` or ``IPPROTO_UDP``), +* source and destination IP address, +* source and destination L4 port, +* the socket that has been selected with ``bpf_sk_assign()``. + +Refer to ``struct bpf_sk_lookup`` declaration in ``linux/bpf.h`` user API +header, and `bpf-helpers(7) +<https://man7.org/linux/man-pages/man7/bpf-helpers.7.html>`_ man-page section +for ``bpf_sk_assign()`` for details. + +Example +======= + +See ``tools/testing/selftests/bpf/prog_tests/sk_lookup.c`` for the reference +implementation. diff --git a/Documentation/bpf/ringbuf.rst b/Documentation/bpf/ringbuf.rst index 75f943f0009d..6a615cd62bda 100644 --- a/Documentation/bpf/ringbuf.rst +++ b/Documentation/bpf/ringbuf.rst @@ -182,9 +182,6 @@ in the order of reservations, but only after all previous records where already committed. It is thus possible for slow producers to temporarily hold off submitted records, that were reserved later. -Reservation/commit/consumer protocol is verified by litmus tests in -Documentation/litmus_tests/bpf-rb/_. - One interesting implementation bit, that significantly simplifies (and thus speeds up as well) implementation of both producers and consumers is how data area is mapped twice contiguously back-to-back in the virtual memory. This @@ -200,7 +197,7 @@ a self-pacing notifications of new data being availability. being available after commit only if consumer has already caught up right up to the record being committed. If not, consumer still has to catch up and thus will see new data anyways without needing an extra poll notification. -Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c_) show that +Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbufs.c) show that this allows to achieve a very high throughput without having to resort to tricks like "notify only every Nth sample", which are necessary with perf buffer. For extreme cases, when BPF program wants more manual control of diff --git a/Documentation/conf.py b/Documentation/conf.py index c503188880d9..376dd0ddf39c 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -36,10 +36,82 @@ needs_sphinx = '1.3' # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. -extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain', +extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'kfigure', 'sphinx.ext.ifconfig', 'automarkup', 'maintainers_include', 'sphinx.ext.autosectionlabel' ] +# +# cdomain is badly broken in Sphinx 3+. Leaving it out generates *most* +# of the docs correctly, but not all. Scream bloody murder but allow +# the process to proceed; hopefully somebody will fix this properly soon. +# +if major >= 3: + sys.stderr.write('''WARNING: The kernel documentation build process + support for Sphinx v3.0 and above is brand new. Be prepared for + possible issues in the generated output. + ''') + if minor > 0 or patch >= 2: + # Sphinx c function parser is more pedantic with regards to type + # checking. Due to that, having macros at c:function cause problems. + # Those needed to be scaped by using c_id_attributes[] array + c_id_attributes = [ + # GCC Compiler types not parsed by Sphinx: + "__restrict__", + + # include/linux/compiler_types.h: + "__iomem", + "__kernel", + "noinstr", + "notrace", + "__percpu", + "__rcu", + "__user", + + # include/linux/compiler_attributes.h: + "__alias", + "__aligned", + "__aligned_largest", + "__always_inline", + "__assume_aligned", + "__cold", + "__attribute_const__", + "__copy", + "__pure", + "__designated_init", + "__visible", + "__printf", + "__scanf", + "__gnu_inline", + "__malloc", + "__mode", + "__no_caller_saved_registers", + "__noclone", + "__nonstring", + "__noreturn", + "__packed", + "__pure", + "__section", + "__always_unused", + "__maybe_unused", + "__used", + "__weak", + "noinline", + + # include/linux/memblock.h: + "__init_memblock", + "__meminit", + + # include/linux/init.h: + "__init", + "__ref", + + # include/linux/linkage.h: + "asmlinkage", + ] + +else: + extensions.append('cdomain') + # Ensure that autosectionlabel will produce unique names autosectionlabel_prefix_document = True autosectionlabel_maxdepth = 2 diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst index 298c9c8bea9a..a2c96bec5ee8 100644 --- a/Documentation/core-api/cpu_hotplug.rst +++ b/Documentation/core-api/cpu_hotplug.rst @@ -30,7 +30,7 @@ which didn't support these methods. Command Line Switches ===================== ``maxcpus=n`` - Restrict boot time CPUs to *n*. Say if you have fourV CPUs, using + Restrict boot time CPUs to *n*. Say if you have four CPUs, using ``maxcpus=2`` will only boot two. You can choose to bring the other CPUs later online. diff --git a/Documentation/core-api/dma-api.rst b/Documentation/core-api/dma-api.rst index 3b3abbbb4b9a..ea0413276ddb 100644 --- a/Documentation/core-api/dma-api.rst +++ b/Documentation/core-api/dma-api.rst @@ -516,48 +516,56 @@ routines, e.g.::: } -Part II - Advanced dma usage ----------------------------- +Part II - Non-coherent DMA allocations +-------------------------------------- -Warning: These pieces of the DMA API should not be used in the -majority of cases, since they cater for unlikely corner cases that -don't belong in usual drivers. +These APIs allow to allocate pages in the kernel direct mapping that are +guaranteed to be DMA addressable. This means that unlike dma_alloc_coherent, +virt_to_page can be called on the resulting address, and the resulting +struct page can be used for everything a struct page is suitable for. -If you don't understand how cache line coherency works between a -processor and an I/O device, you should not be using this part of the -API at all. +If you don't understand how cache line coherency works between a processor and +an I/O device, you should not be using this part of the API. :: void * - dma_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle, - gfp_t flag, unsigned long attrs) + dma_alloc_noncoherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, enum dma_data_direction dir, + gfp_t gfp) -Identical to dma_alloc_coherent() except that when the -DMA_ATTR_NON_CONSISTENT flags is passed in the attrs argument, the -platform will choose to return either consistent or non-consistent memory -as it sees fit. By using this API, you are guaranteeing to the platform -that you have all the correct and necessary sync points for this memory -in the driver should it choose to return non-consistent memory. +This routine allocates a region of <size> bytes of consistent memory. It +returns a pointer to the allocated region (in the processor's virtual address +space) or NULL if the allocation failed. The returned memory may or may not +be in the kernels direct mapping. Drivers must not call virt_to_page on +the returned memory region. -Note: where the platform can return consistent memory, it will -guarantee that the sync points become nops. +It also returns a <dma_handle> which may be cast to an unsigned integer the +same width as the bus and given to the device as the DMA address base of +the region. + +The dir parameter specified if data is read and/or written by the device, +see dma_map_single() for details. + +The gfp parameter allows the caller to specify the ``GFP_`` flags (see +kmalloc()) for the allocation, but rejects flags used to specify a memory +zone such as GFP_DMA or GFP_HIGHMEM. -Warning: Handling non-consistent memory is a real pain. You should -only use this API if you positively know your driver will be -required to work on one of the rare (usually non-PCI) architectures -that simply cannot make consistent memory. +Before giving the memory to the device, dma_sync_single_for_device() needs +to be called, and before reading memory written by the device, +dma_sync_single_for_cpu(), just like for streaming DMA mappings that are +reused. :: void - dma_free_attrs(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t dma_handle, unsigned long attrs) + dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t dma_handle, enum dma_data_direction dir) -Free memory allocated by the dma_alloc_attrs(). All common -parameters must be identical to those otherwise passed to dma_free_coherent, -and the attrs argument must be identical to the attrs passed to -dma_alloc_attrs(). +Free a region of memory previously allocated using dma_alloc_noncoherent(). +dev, size and dma_handle and dir must all be the same as those passed into +dma_alloc_noncoherent(). cpu_addr must be the virtual address returned by +the dma_alloc_noncoherent(). :: @@ -575,41 +583,6 @@ memory or doing partial flushes. into the width returned by this call. It will also always be a power of two for easy alignment. -:: - - void - dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) - -Do a partial sync of memory that was allocated by dma_alloc_attrs() with -the DMA_ATTR_NON_CONSISTENT flag starting at virtual address vaddr and -continuing on for size. Again, you *must* observe the cache line -boundaries when doing this. - -:: - - int - dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr, - dma_addr_t device_addr, size_t size); - -Declare region of memory to be handed out by dma_alloc_coherent() when -it's asked for coherent memory for this device. - -phys_addr is the CPU physical address to which the memory is currently -assigned (this will be ioremapped so the CPU can access the region). - -device_addr is the DMA address the device needs to be programmed -with to actually address this memory (this will be handed out as the -dma_addr_t in dma_alloc_coherent()). - -size is the size of the area (must be multiples of PAGE_SIZE). - -As a simplification for the platforms, only *one* such region of -memory may be declared per device. - -For reasons of efficiency, most platforms choose to track the declared -region only at the granularity of a page. For smaller allocations, -you should use the dma_pool() API. Part III - Debug drivers use of the DMA-API ------------------------------------------- diff --git a/Documentation/core-api/dma-attributes.rst b/Documentation/core-api/dma-attributes.rst index 29dcbe8826e8..1887d92e8e92 100644 --- a/Documentation/core-api/dma-attributes.rst +++ b/Documentation/core-api/dma-attributes.rst @@ -25,14 +25,6 @@ Since it is optional for platforms to implement DMA_ATTR_WRITE_COMBINE, those that do not will simply ignore the attribute and exhibit default behavior. -DMA_ATTR_NON_CONSISTENT ------------------------ - -DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either -consistent or non-consistent memory as it sees fit. By using this API, -you are guaranteeing to the platform that you have all the correct and -necessary sync points for this memory in the driver. - DMA_ATTR_NO_KERNEL_MAPPING -------------------------- diff --git a/Documentation/core-api/genericirq.rst b/Documentation/core-api/genericirq.rst index 8f06d885c310..f959c9b53f61 100644 --- a/Documentation/core-api/genericirq.rst +++ b/Documentation/core-api/genericirq.rst @@ -419,6 +419,7 @@ functions which are exported. .. kernel-doc:: kernel/irq/manage.c .. kernel-doc:: kernel/irq/chip.c + :export: Internal Functions Provided =========================== @@ -431,6 +432,7 @@ functions. .. kernel-doc:: kernel/irq/handle.c .. kernel-doc:: kernel/irq/chip.c + :internal: Credits ======= diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index 4ac53a1363f6..741aa37dc181 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -231,12 +231,6 @@ Refer to the file kernel/module.c for more information. Hardware Interfaces =================== -Interrupt Handling ------------------- - -.. kernel-doc:: kernel/irq/manage.c - :export: - DMA Channels ------------ diff --git a/Documentation/core-api/workqueue.rst b/Documentation/core-api/workqueue.rst index 00a5ba51e63f..541d31de8926 100644 --- a/Documentation/core-api/workqueue.rst +++ b/Documentation/core-api/workqueue.rst @@ -396,3 +396,5 @@ Kernel Inline Documentations Reference ====================================== .. kernel-doc:: include/linux/workqueue.h + +.. kernel-doc:: kernel/workqueue.c diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst index 640934b6f7b4..a137a0e6d068 100644 --- a/Documentation/core-api/xarray.rst +++ b/Documentation/core-api/xarray.rst @@ -475,13 +475,15 @@ or iterations will move the index to the first index in the range. Each entry will only be returned once, no matter how many indices it occupies. -Using xas_next() or xas_prev() with a multi-index xa_state -is not supported. Using either of these functions on a multi-index entry -will reveal sibling entries; these should be skipped over by the caller. - -Storing ``NULL`` into any index of a multi-index entry will set the entry -at every index to ``NULL`` and dissolve the tie. Splitting a multi-index -entry into entries occupying smaller ranges is not yet supported. +Using xas_next() or xas_prev() with a multi-index xa_state is not +supported. Using either of these functions on a multi-index entry will +reveal sibling entries; these should be skipped over by the caller. + +Storing ``NULL`` into any index of a multi-index entry will set the +entry at every index to ``NULL`` and dissolve the tie. A multi-index +entry can be split into entries occupying smaller ranges by calling +xas_split_alloc() without the xa_lock held, followed by taking the lock +and calling xas_split(). Functions and structures ======================== diff --git a/Documentation/crypto/userspace-if.rst b/Documentation/crypto/userspace-if.rst index 52019e905900..b45dabbf69d6 100644 --- a/Documentation/crypto/userspace-if.rst +++ b/Documentation/crypto/userspace-if.rst @@ -296,15 +296,16 @@ follows: struct sockaddr_alg sa = { .salg_family = AF_ALG, - .salg_type = "rng", /* this selects the symmetric cipher */ - .salg_name = "drbg_nopr_sha256" /* this is the cipher name */ + .salg_type = "rng", /* this selects the random number generator */ + .salg_name = "drbg_nopr_sha256" /* this is the RNG name */ }; Depending on the RNG type, the RNG must be seeded. The seed is provided using the setsockopt interface to set the key. For example, the ansi_cprng requires a seed. The DRBGs do not require a seed, but may be -seeded. +seeded. The seed is also known as a *Personalization String* in NIST SP 800-90A +standard. Using the read()/recvmsg() system calls, random numbers can be obtained. The kernel generates at most 128 bytes in one call. If user space @@ -314,6 +315,16 @@ WARNING: The user space caller may invoke the initially mentioned accept system call multiple times. In this case, the returned file descriptors have the same state. +Following CAVP testing interfaces are enabled when kernel is built with +CRYPTO_USER_API_RNG_CAVP option: + +- the concatenation of *Entropy* and *Nonce* can be provided to the RNG via + ALG_SET_DRBG_ENTROPY setsockopt interface. Setting the entropy requires + CAP_SYS_ADMIN permission. + +- *Additional Data* can be provided using the send()/sendmsg() system calls, + but only after the entropy has been set. + Zero-Copy Interface ------------------- @@ -377,6 +388,9 @@ mentioned optname: provided ciphertext is assumed to contain an authentication tag of the given size (see section about AEAD memory layout below). +- ALG_SET_DRBG_ENTROPY -- Setting the entropy of the random number generator. + This option is applicable to RNG cipher type only. + User space API example ---------------------- diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst index 38fd5681fade..c09c9ca2ff1c 100644 --- a/Documentation/dev-tools/kasan.rst +++ b/Documentation/dev-tools/kasan.rst @@ -13,10 +13,10 @@ KASAN uses compile-time instrumentation to insert validity checks before every memory access, and therefore requires a compiler version that supports that. Generic KASAN is supported in both GCC and Clang. With GCC it requires version -8.3.0 or later. With Clang it requires version 7.0.0 or later, but detection of +8.3.0 or later. Any supported Clang version is compatible, but detection of out-of-bounds accesses for global variables is only supported since Clang 11. -Tag-based KASAN is only supported in Clang and requires version 7.0.0 or later. +Tag-based KASAN is only supported in Clang. Currently generic KASAN is supported for the x86_64, arm64, xtensa, s390 and riscv architectures, and tag-based KASAN is supported only for arm64. @@ -281,3 +281,73 @@ unmapped. This will require changes in arch-specific code. This allows ``VMAP_STACK`` support on x86, and can simplify support of architectures that do not have a fixed module region. + +CONFIG_KASAN_KUNIT_TEST & CONFIG_TEST_KASAN_MODULE +-------------------------------------------------- + +``CONFIG_KASAN_KUNIT_TEST`` utilizes the KUnit Test Framework for testing. +This means each test focuses on a small unit of functionality and +there are a few ways these tests can be run. + +Each test will print the KASAN report if an error is detected and then +print the number of the test and the status of the test: + +pass:: + + ok 28 - kmalloc_double_kzfree +or, if kmalloc failed:: + + # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163 + Expected ptr is not null, but is + not ok 4 - kmalloc_large_oob_right +or, if a KASAN report was expected, but not found:: + + # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:629 + Expected kasan_data->report_expected == kasan_data->report_found, but + kasan_data->report_expected == 1 + kasan_data->report_found == 0 + not ok 28 - kmalloc_double_kzfree + +All test statuses are tracked as they run and an overall status will +be printed at the end:: + + ok 1 - kasan + +or:: + + not ok 1 - kasan + +(1) Loadable Module +~~~~~~~~~~~~~~~~~~~~ + +With ``CONFIG_KUNIT`` enabled, ``CONFIG_KASAN_KUNIT_TEST`` can be built as +a loadable module and run on any architecture that supports KASAN +using something like insmod or modprobe. The module is called ``test_kasan``. + +(2) Built-In +~~~~~~~~~~~~~ + +With ``CONFIG_KUNIT`` built-in, ``CONFIG_KASAN_KUNIT_TEST`` can be built-in +on any architecure that supports KASAN. These and any other KUnit +tests enabled will run and print the results at boot as a late-init +call. + +(3) Using kunit_tool +~~~~~~~~~~~~~~~~~~~~~ + +With ``CONFIG_KUNIT`` and ``CONFIG_KASAN_KUNIT_TEST`` built-in, we can also +use kunit_tool to see the results of these along with other KUnit +tests in a more readable way. This will not print the KASAN reports +of tests that passed. Use `KUnit documentation <https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html>`_ for more up-to-date +information on kunit_tool. + +.. _KUnit: https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html + +``CONFIG_TEST_KASAN_MODULE`` is a set of KASAN tests that could not be +converted to KUnit. These tests can be run only as a module with +``CONFIG_TEST_KASAN_MODULE`` built as a loadable module and +``CONFIG_KASAN`` built-in. The type of error expected and the +function being run is printed before the expression expected to give +an error. Then the error is printed, if found, and that test +should be interpretted to pass only if the error was the one expected +by the test. diff --git a/Documentation/dev-tools/kgdb.rst b/Documentation/dev-tools/kgdb.rst index c908ef4d3f04..77b688e6a254 100644 --- a/Documentation/dev-tools/kgdb.rst +++ b/Documentation/dev-tools/kgdb.rst @@ -726,7 +726,7 @@ The kernel debugger is organized into a number of components: - contains an arch-specific trap catcher which invokes kgdb_handle_exception() to start kgdb about doing its work - - translation to and from gdb specific packet format to :c:type:`pt_regs` + - translation to and from gdb specific packet format to struct pt_regs - Registration and unregistration of architecture specific trap hooks @@ -846,7 +846,7 @@ invokes a callback in the serial core which in turn uses the callback in the UART driver. When using kgdboc with a UART, the UART driver must implement two -callbacks in the :c:type:`struct uart_ops <uart_ops>`. +callbacks in the struct uart_ops. Example from ``drivers/8250.c``:: @@ -875,7 +875,7 @@ kernel when ``CONFIG_KDB_KEYBOARD=y`` is set in the kernel configuration. The core polled keyboard driver for PS/2 type keyboards is in ``drivers/char/kdb_keyboard.c``. This driver is hooked into the debug core when kgdboc populates the callback in the array called -:c:type:`kdb_poll_funcs[]`. The kdb_get_kbd_char() is the top-level +:c:expr:`kdb_poll_funcs[]`. The kdb_get_kbd_char() is the top-level function which polls hardware for single character input. kgdboc and kms diff --git a/Documentation/dev-tools/kmemleak.rst b/Documentation/dev-tools/kmemleak.rst index a41a2d238af2..1c935f41cd3a 100644 --- a/Documentation/dev-tools/kmemleak.rst +++ b/Documentation/dev-tools/kmemleak.rst @@ -229,7 +229,7 @@ Testing with kmemleak-test To check if you have all set up to use kmemleak, you can use the kmemleak-test module, a module that deliberately leaks memory. Set CONFIG_DEBUG_KMEMLEAK_TEST -as module (it can't be used as bult-in) and boot the kernel with kmemleak +as module (it can't be used as built-in) and boot the kernel with kmemleak enabled. Load the module and perform a scan with:: # modprobe kmemleak-test diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index 469d115a95f1..a901def730d9 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -125,32 +125,41 @@ Note that some tests will require root privileges. Install selftests ================= -You can use the kselftest_install.sh tool to install selftests in the -default location, which is tools/testing/selftests/kselftest, or in a -user specified location. +You can use the "install" target of "make" (which calls the `kselftest_install.sh` +tool) to install selftests in the default location (`tools/testing/selftests/kselftest_install`), +or in a user specified location via the `INSTALL_PATH` "make" variable. To install selftests in default location:: - $ cd tools/testing/selftests - $ ./kselftest_install.sh + $ make -C tools/testing/selftests install To install selftests in a user specified location:: - $ cd tools/testing/selftests - $ ./kselftest_install.sh install_dir + $ make -C tools/testing/selftests install INSTALL_PATH=/some/other/path Running installed selftests =========================== -Kselftest install as well as the Kselftest tarball provide a script -named "run_kselftest.sh" to run the tests. +Found in the install directory, as well as in the Kselftest tarball, +is a script named `run_kselftest.sh` to run the tests. You can simply do the following to run the installed Kselftests. Please note some tests will require root privileges:: - $ cd kselftest + $ cd kselftest_install $ ./run_kselftest.sh +To see the list of available tests, the `-l` option can be used:: + + $ ./run_kselftest.sh -l + +The `-c` option can be used to run all the tests from a test collection, or +the `-t` option for specific single tests. Either can be used multiple times:: + + $ ./run_kselftest.sh -c bpf -c seccomp -t timers:posix_timers -t timer:nanosleep + +For other features see the script usage output, seen with the `-h` option. + Packaging selftests =================== @@ -160,9 +169,9 @@ different system. To package selftests, run:: $ make -C tools/testing/selftests gen_tar This generates a tarball in the `INSTALL_PATH/kselftest-packages` directory. By -default, `.gz` format is used. The tar format can be overridden by specifying -a `FORMAT` make variable. Any value recognized by `tar's auto-compress`_ option -is supported, such as:: +default, `.gz` format is used. The tar compression format can be overridden by +specifying a `FORMAT` make variable. Any value recognized by `tar's auto-compress`_ +option is supported, such as:: $ make -C tools/testing/selftests gen_tar FORMAT=.xz diff --git a/Documentation/dev-tools/kunit/index.rst b/Documentation/dev-tools/kunit/index.rst index e93606ecfb01..c234a3ab3c34 100644 --- a/Documentation/dev-tools/kunit/index.rst +++ b/Documentation/dev-tools/kunit/index.rst @@ -11,6 +11,7 @@ KUnit - Unit Testing for the Linux Kernel usage kunit-tool api/index + style faq What is KUnit? diff --git a/Documentation/dev-tools/kunit/style.rst b/Documentation/dev-tools/kunit/style.rst new file mode 100644 index 000000000000..da1d6f0ed6bc --- /dev/null +++ b/Documentation/dev-tools/kunit/style.rst @@ -0,0 +1,205 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================== +Test Style and Nomenclature +=========================== + +To make finding, writing, and using KUnit tests as simple as possible, it's +strongly encouraged that they are named and written according to the guidelines +below. While it's possible to write KUnit tests which do not follow these rules, +they may break some tooling, may conflict with other tests, and may not be run +automatically by testing systems. + +It's recommended that you only deviate from these guidelines when: + +1. Porting tests to KUnit which are already known with an existing name, or +2. Writing tests which would cause serious problems if automatically run (e.g., + non-deterministically producing false positives or negatives, or taking an + extremely long time to run). + +Subsystems, Suites, and Tests +============================= + +In order to make tests as easy to find as possible, they're grouped into suites +and subsystems. A test suite is a group of tests which test a related area of +the kernel, and a subsystem is a set of test suites which test different parts +of the same kernel subsystem or driver. + +Subsystems +---------- + +Every test suite must belong to a subsystem. A subsystem is a collection of one +or more KUnit test suites which test the same driver or part of the kernel. A +rule of thumb is that a test subsystem should match a single kernel module. If +the code being tested can't be compiled as a module, in many cases the subsystem +should correspond to a directory in the source tree or an entry in the +MAINTAINERS file. If unsure, follow the conventions set by tests in similar +areas. + +Test subsystems should be named after the code being tested, either after the +module (wherever possible), or after the directory or files being tested. Test +subsystems should be named to avoid ambiguity where necessary. + +If a test subsystem name has multiple components, they should be separated by +underscores. *Do not* include "test" or "kunit" directly in the subsystem name +unless you are actually testing other tests or the kunit framework itself. + +Example subsystems could be: + +``ext4`` + Matches the module and filesystem name. +``apparmor`` + Matches the module name and LSM name. +``kasan`` + Common name for the tool, prominent part of the path ``mm/kasan`` +``snd_hda_codec_hdmi`` + Has several components (``snd``, ``hda``, ``codec``, ``hdmi``) separated by + underscores. Matches the module name. + +Avoid names like these: + +``linear-ranges`` + Names should use underscores, not dashes, to separate words. Prefer + ``linear_ranges``. +``qos-kunit-test`` + As well as using underscores, this name should not have "kunit-test" as a + suffix, and ``qos`` is ambiguous as a subsystem name. ``power_qos`` would be a + better name. +``pc_parallel_port`` + The corresponding module name is ``parport_pc``, so this subsystem should also + be named ``parport_pc``. + +.. note:: + The KUnit API and tools do not explicitly know about subsystems. They're + simply a way of categorising test suites and naming modules which + provides a simple, consistent way for humans to find and run tests. This + may change in the future, though. + +Suites +------ + +KUnit tests are grouped into test suites, which cover a specific area of +functionality being tested. Test suites can have shared initialisation and +shutdown code which is run for all tests in the suite. +Not all subsystems will need to be split into multiple test suites (e.g. simple drivers). + +Test suites are named after the subsystem they are part of. If a subsystem +contains several suites, the specific area under test should be appended to the +subsystem name, separated by an underscore. + +In the event that there are multiple types of test using KUnit within a +subsystem (e.g., both unit tests and integration tests), they should be put into +separate suites, with the type of test as the last element in the suite name. +Unless these tests are actually present, avoid using ``_test``, ``_unittest`` or +similar in the suite name. + +The full test suite name (including the subsystem name) should be specified as +the ``.name`` member of the ``kunit_suite`` struct, and forms the base for the +module name (see below). + +Example test suites could include: + +``ext4_inode`` + Part of the ``ext4`` subsystem, testing the ``inode`` area. +``kunit_try_catch`` + Part of the ``kunit`` implementation itself, testing the ``try_catch`` area. +``apparmor_property_entry`` + Part of the ``apparmor`` subsystem, testing the ``property_entry`` area. +``kasan`` + The ``kasan`` subsystem has only one suite, so the suite name is the same as + the subsystem name. + +Avoid names like: + +``ext4_ext4_inode`` + There's no reason to state the subsystem twice. +``property_entry`` + The suite name is ambiguous without the subsystem name. +``kasan_integration_test`` + Because there is only one suite in the ``kasan`` subsystem, the suite should + just be called ``kasan``. There's no need to redundantly add + ``integration_test``. Should a separate test suite with, for example, unit + tests be added, then that suite could be named ``kasan_unittest`` or similar. + +Test Cases +---------- + +Individual tests consist of a single function which tests a constrained +codepath, property, or function. In the test output, individual tests' results +will show up as subtests of the suite's results. + +Tests should be named after what they're testing. This is often the name of the +function being tested, with a description of the input or codepath being tested. +As tests are C functions, they should be named and written in accordance with +the kernel coding style. + +.. note:: + As tests are themselves functions, their names cannot conflict with + other C identifiers in the kernel. This may require some creative + naming. It's a good idea to make your test functions `static` to avoid + polluting the global namespace. + +Example test names include: + +``unpack_u32_with_null_name`` + Tests the ``unpack_u32`` function when a NULL name is passed in. +``test_list_splice`` + Tests the ``list_splice`` macro. It has the prefix ``test_`` to avoid a + name conflict with the macro itself. + + +Should it be necessary to refer to a test outside the context of its test suite, +the *fully-qualified* name of a test should be the suite name followed by the +test name, separated by a colon (i.e. ``suite:test``). + +Test Kconfig Entries +==================== + +Every test suite should be tied to a Kconfig entry. + +This Kconfig entry must: + +* be named ``CONFIG_<name>_KUNIT_TEST``: where <name> is the name of the test + suite. +* be listed either alongside the config entries for the driver/subsystem being + tested, or be under [Kernel Hacking]→[Kernel Testing and Coverage] +* depend on ``CONFIG_KUNIT`` +* be visible only if ``CONFIG_KUNIT_ALL_TESTS`` is not enabled. +* have a default value of ``CONFIG_KUNIT_ALL_TESTS``. +* have a brief description of KUnit in the help text + +Unless there's a specific reason not to (e.g. the test is unable to be built as +a module), Kconfig entries for tests should be tristate. + +An example Kconfig entry: + +.. code-block:: none + + config FOO_KUNIT_TEST + tristate "KUnit test for foo" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + help + This builds unit tests for foo. + + For more information on KUnit and unit tests in general, please refer + to the KUnit documentation in Documentation/dev-tools/kunit + + If unsure, say N + + +Test File and Module Names +========================== + +KUnit tests can often be compiled as a module. These modules should be named +after the test suite, followed by ``_test``. If this is likely to conflict with +non-KUnit tests, the suffix ``_kunit`` can also be used. + +The easiest way of achieving this is to name the file containing the test suite +``<suite>_test.c`` (or, as above, ``<suite>_kunit.c``). This file should be +placed next to the code under test. + +If the suite name contains some or all of the name of the test's parent +directory, it may make sense to modify the source filename to reduce redundancy. +For example, a ``foo_firmware`` suite could be in the ``foo/firmware_test.c`` +file. diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index 3c3fe8b5fecc..961d3ea3ca19 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -211,6 +211,11 @@ KUnit test framework. .. note:: A test case will only be run if it is associated with a test suite. +``kunit_test_suite(...)`` is a macro which tells the linker to put the specified +test suite in a special linker section so that it can be run by KUnit either +after late_init, or when the test module is loaded (depending on whether the +test was built in or not). + For more information on these types of things see the :doc:`api/test`. Isolating Behavior diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore index 5c6d8ea1a09c..3a05b99bfa26 100644 --- a/Documentation/devicetree/bindings/.gitignore +++ b/Documentation/devicetree/bindings/.gitignore @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only *.example.dts processed-schema*.yaml +processed-schema*.json diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint new file mode 100644 index 000000000000..214abd3ec440 --- /dev/null +++ b/Documentation/devicetree/bindings/.yamllint @@ -0,0 +1,39 @@ +extends: relaxed + +rules: + line-length: + # 80 chars should be enough, but don't fail if a line is longer + max: 110 + allow-non-breakable-words: true + level: warning + braces: + min-spaces-inside: 0 + max-spaces-inside: 1 + min-spaces-inside-empty: 0 + max-spaces-inside-empty: 0 + brackets: + min-spaces-inside: 0 + max-spaces-inside: 1 + min-spaces-inside-empty: 0 + max-spaces-inside-empty: 0 + colons: {max-spaces-before: 0, max-spaces-after: 1} + commas: {min-spaces-after: 1, max-spaces-after: 1} + comments: + require-starting-space: false + min-spaces-from-content: 1 + comments-indentation: disable + document-start: + present: true + empty-lines: + max: 3 + max-end: 1 + empty-values: + forbid-in-block-mappings: true + forbid-in-flow-mappings: true + hyphens: + max-spaces-after: 1 + indentation: + spaces: 2 + indent-sequences: true + check-multi-line-strings: false + trailing-spaces: false diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 91c4d00e96d3..f50420099a55 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -3,7 +3,9 @@ DT_DOC_CHECKER ?= dt-doc-validate DT_EXTRACT_EX ?= dt-extract-example DT_MK_SCHEMA ?= dt-mk-schema -DT_SCHEMA_MIN_VERSION = 2020.5 +DT_SCHEMA_LINT = $(shell which yamllint) + +DT_SCHEMA_MIN_VERSION = 2020.8.1 PHONY += check_dtschema_version check_dtschema_version: @@ -11,26 +13,40 @@ check_dtschema_version: $(DT_DOC_CHECKER) --version 2>/dev/null || echo 0; } | sort -VC || \ { echo "ERROR: dtschema minimum version is v$(DT_SCHEMA_MIN_VERSION)" >&2; false; } -quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<) - cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \ - $(DT_EXTRACT_EX) $< > $@ +quiet_cmd_extract_ex = DTEX $@ + cmd_extract_ex = $(DT_EXTRACT_EX) $< > $@ $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE - $(call if_changed,chk_binding) + $(call if_changed,extract_ex) # Use full schemas when checking %.example.dts -DT_TMP_SCHEMA := $(obj)/processed-schema-examples.yaml +DT_TMP_SCHEMA := $(obj)/processed-schema-examples.json find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \ -name 'processed-schema*' ! \ -name '*.example.dt.yaml' \) +quiet_cmd_yamllint = LINT $(src) + cmd_yamllint = $(find_cmd) | \ + xargs $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint + +quiet_cmd_chk_bindings = CHKDT $@ + cmd_chk_bindings = $(find_cmd) | \ + xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(srctree)/$(src) + quiet_cmd_mk_schema = SCHEMA $@ - cmd_mk_schema = rm -f $@ ; \ + cmd_mk_schema = f=$$(mktemp) ; \ $(if $(DT_MK_SCHEMA_FLAGS), \ echo $(real-prereqs), \ - $(find_cmd)) | \ - xargs $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) >> $@ + $(find_cmd)) > $$f ; \ + $(DT_MK_SCHEMA) -j $(DT_MK_SCHEMA_FLAGS) @$$f > $@ ; \ + rm -f $$f + +define rule_chkdt + $(if $(DT_SCHEMA_LINT),$(call cmd,yamllint),) + $(call cmd,chk_bindings) + $(call cmd,mk_schema) +endef DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||') @@ -39,33 +55,33 @@ override DTC_FLAGS := \ -Wno-graph_child_address \ -Wno-interrupt_provider -$(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE - $(call if_changed,mk_schema) +$(obj)/processed-schema-examples.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE + $(call if_changed_rule,chkdt) ifeq ($(DT_SCHEMA_FILES),) # Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too. -# Just copy processed-schema-examples.yaml +# Just copy processed-schema-examples.json -$(obj)/processed-schema.yaml: $(obj)/processed-schema-examples.yaml FORCE +$(obj)/processed-schema.json: $(obj)/processed-schema-examples.json FORCE $(call if_changed,copy) DT_SCHEMA_FILES = $(DT_DOCS) else -# If DT_SCHEMA_FILES is specified, use it for processed-schema.yaml +# If DT_SCHEMA_FILES is specified, use it for processed-schema.json -$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u -$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE +$(obj)/processed-schema.json: DT_MK_SCHEMA_FLAGS := -u +$(obj)/processed-schema.json: $(DT_SCHEMA_FILES) check_dtschema_version FORCE $(call if_changed,mk_schema) endif +extra-$(CHECK_DT_BINDING) += processed-schema-examples.json +extra-$(CHECK_DTBS) += processed-schema.json extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) -extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml -extra-$(CHECK_DTBS) += processed-schema.yaml # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of # build artifacts here before they are processed by scripts/Makefile.clean diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml index ace3fdaa8396..14023f0a8552 100644 --- a/Documentation/devicetree/bindings/arm/actions.yaml +++ b/Documentation/devicetree/bindings/arm/actions.yaml @@ -11,6 +11,8 @@ maintainers: - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> properties: + $nodename: + const: "/" compatible: oneOf: # The Actions Semi S500 is a quad-core ARM Cortex-A9 SoC. diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml index b388c5aa7984..0bc5020b7539 100644 --- a/Documentation/devicetree/bindings/arm/altera.yaml +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -10,6 +10,8 @@ maintainers: - Dinh Nguyen <dinguyen@kernel.org> properties: + $nodename: + const: "/" compatible: items: - enum: diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml index 98780a569f22..3ea5f2fdcd96 100644 --- a/Documentation/devicetree/bindings/arm/axxia.yaml +++ b/Documentation/devicetree/bindings/arm/axxia.yaml @@ -10,6 +10,8 @@ maintainers: - Anders Berg <anders.berg@lsi.com> properties: + $nodename: + const: "/" compatible: description: LSI AXM5516 Validation board (Amarillo) items: diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index 17e4f20c8d39..a2c63c8b1d10 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -23,7 +23,7 @@ properties: compatible: items: - const: raspberrypi,bcm2835-firmware - - const: simple-bus + - const: simple-mfd mboxes: $ref: '/schemas/types.yaml#/definitions/phandle' @@ -48,21 +48,44 @@ properties: - compatible - "#clock-cells" + reset: + type: object + + properties: + compatible: + const: raspberrypi,firmware-reset + + "#reset-cells": + const: 1 + description: > + The argument is the ID of the firmware reset line to affect. + + required: + - compatible + - "#reset-cells" + additionalProperties: false required: - compatible - mboxes +additionalProperties: false + examples: - | firmware { - compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; + compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; mboxes = <&mailbox>; firmware_clocks: clocks { compatible = "raspberrypi,firmware-clocks"; #clock-cells = <1>; }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; }; ... diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml index 5cd5b36cff2d..5880083ab8d0 100644 --- a/Documentation/devicetree/bindings/arm/bitmain.yaml +++ b/Documentation/devicetree/bindings/arm/bitmain.yaml @@ -10,6 +10,8 @@ maintainers: - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> properties: + $nodename: + const: "/" compatible: items: - enum: diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml index e42ff69d8bfb..21e3515491f4 100644 --- a/Documentation/devicetree/bindings/arm/coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -220,6 +220,8 @@ then: required: - cpu +unevaluatedProperties: false + examples: # minimum CTI definition. DEVID register used to set number of triggers. - | diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 1222bf1831fa..14cd727d3c4b 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -341,6 +341,8 @@ required: dependencies: rockchip,pmu: [enable-method] +additionalProperties: true + examples: - | cpus { diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml index d9c80b827e9b..849e20518339 100644 --- a/Documentation/devicetree/bindings/arm/digicolor.yaml +++ b/Documentation/devicetree/bindings/arm/digicolor.yaml @@ -10,6 +10,8 @@ maintainers: - Baruch Siach <baruch@tkos.co.il> properties: + $nodename: + const: "/" compatible: const: cnxt,cx92755 diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt deleted file mode 100644 index 75195bee116f..000000000000 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt +++ /dev/null @@ -1,23 +0,0 @@ -Freescale i.MX7ULP Power Management Components ----------------------------------------------- - -The Multi-System Mode Controller (MSMC) is responsible for sequencing -the MCU into and out of all stop and run power modes. Specifically, it -monitors events to trigger transitions between power modes while -controlling the power, clocks, and memories of the MCU to achieve the -power consumption and functionality of that mode. - -The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or -Standby modes for either Cortex family. Run, Wait, and Stop are the -common terms used for the primary operating modes of Kinetis -microcontrollers. - -Required properties: -- compatible: Should be "fsl,imx7ulp-smc1". -- reg: Specifies base physical address and size of the register sets. - -Example: -smc1: smc1@40410000 { - compatible = "fsl,imx7ulp-smc1"; - reg = <0x40410000 0x1000>; -}; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml new file mode 100644 index 000000000000..3b26040f8f18 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-pm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX7ULP Power Management Components + +maintainers: + - A.s. Dong <aisheng.dong@nxp.com> + +description: | + The Multi-System Mode Controller (MSMC) is responsible for sequencing + the MCU into and out of all stop and run power modes. Specifically, it + monitors events to trigger transitions between power modes while + controlling the power, clocks, and memories of the MCU to achieve the + power consumption and functionality of that mode. + + The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or + Standby modes for either Cortex family. Run, Wait, and Stop are the + common terms used for the primary operating modes of Kinetis + microcontrollers. + +properties: + compatible: + const: fsl,imx7ulp-smc1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + smc1@40410000 { + compatible = "fsl,imx7ulp-smc1"; + reg = <0x40410000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt deleted file mode 100644 index 7d0c7f002401..000000000000 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt +++ /dev/null @@ -1,16 +0,0 @@ -Freescale i.MX7ULP System Integration Module ----------------------------------------------- -The system integration module (SIM) provides system control and chip configuration -registers. In this module, chip revision information is located in JTAG ID register, -and a set of registers have been made available in DGO domain for SW use, with the -objective to maintain its value between system resets. - -Required properties: -- compatible: Should be "fsl,imx7ulp-sim". -- reg: Specifies base physical address and size of the register sets. - -Example: -sim: sim@410a3000 { - compatible = "fsl,imx7ulp-sim", "syscon"; - reg = <0x410a3000 0x1000>; -}; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml new file mode 100644 index 000000000000..526f508cb98d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-sim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX7ULP System Integration Module + +maintainers: + - Anson Huang <anson.huang@nxp.com> + +description: | + The system integration module (SIM) provides system control and chip configuration + registers. In this module, chip revision information is located in JTAG ID register, + and a set of registers have been made available in DGO domain for SW use, with the + objective to maintain its value between system resets. + +properties: + compatible: + items: + - const: fsl,imx7ulp-sim + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + sim@410a3000 { + compatible = "fsl,imx7ulp-sim", "syscon"; + reg = <0x410a3000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml new file mode 100644 index 000000000000..528dad4cde3c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/cpuctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon CPU controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + The clock registers and power registers of secondary cores are defined + in CPU controller, especially in HIX5HD2 SoC. + +properties: + compatible: + items: + - const: hisilicon,cpuctrl + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +required: + - compatible + - reg + +additionalProperties: + type: object + +examples: + - | + cpuctrl@a22000 { + compatible = "hisilicon,cpuctrl"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00a22000 0x2000>; + ranges = <0 0x00a22000 0x2000>; + + clock: clock@0 { + compatible = "hisilicon,hix5hd2-clock"; + reg = <0 0x2000>; + #clock-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml new file mode 100644 index 000000000000..cba1937aad9a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/hi3798cv200-perictrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Hi3798CV200 Peripheral Controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + The Hi3798CV200 Peripheral Controller controls peripherals, queries + their status, and configures some functions of peripherals. + +properties: + compatible: + items: + - const: hisilicon,hi3798cv200-perictrl + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: + type: object + +examples: + - | + peripheral-controller@8a20000 { + compatible = "hisilicon,hi3798cv200-perictrl", "syscon", "simple-mfd"; + reg = <0x8a20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8a20000 0x1000>; + + phy@850 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x850 0x8>; + #phy-cells = <1>; + clocks = <&crg 42>; + resets = <&crg 0x188 4>; + assigned-clocks = <&crg 42>; + assigned-clock-rates = <100000000>; + hisilicon,fixed-mode = <4>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml new file mode 100644 index 000000000000..6ea6d7ee7a14 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/hi6220-domain-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Hi6220 domain controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + Hisilicon designs some special domain controllers for mobile platform, + such as: the power Always On domain controller, the Media domain + controller(e.g. codec, G3D ...) and the Power Management domain + controller. + + The compatible names of each domain controller are as follows: + Power Always ON domain controller --> hisilicon,hi6220-aoctrl + Media domain controller --> hisilicon,hi6220-mediactrl + Power Management domain controller --> hisilicon,hi6220-pmctrl + +properties: + compatible: + items: + - enum: + - hisilicon,hi6220-aoctrl + - hisilicon,hi6220-mediactrl + - hisilicon,hi6220-pmctrl + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + ao_ctrl@f7800000 { + compatible = "hisilicon,hi6220-aoctrl", "syscon"; + reg = <0xf7800000 0x2000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + media_ctrl@f4410000 { + compatible = "hisilicon,hi6220-mediactrl", "syscon"; + reg = <0xf4410000 0x1000>; + #clock-cells = <1>; + }; + + pm_ctrl@f7032000 { + compatible = "hisilicon,hi6220-pmctrl", "syscon"; + reg = <0xf7032000 0x1000>; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml new file mode 100644 index 000000000000..7378159e61df --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/hip04-bootwrapper.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bootwrapper boot method + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: Bootwrapper boot method (software protocol on SMP) + +properties: + compatible: + items: + - const: hisilicon,hip04-bootwrapper + + boot-method: + description: | + Address and size of boot method. + [0]: bootwrapper physical address + [1]: bootwrapper size + [2]: relocation physical address + [3]: relocation size + minItems: 1 + maxItems: 2 + +required: + - compatible + - boot-method + +additionalProperties: false +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml new file mode 100644 index 000000000000..60c516a04ad5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/hip04-fabric.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Fabric controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: Hisilicon Fabric controller + +properties: + compatible: + items: + - const: hisilicon,hip04-fabric + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml new file mode 100644 index 000000000000..6d5065872809 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/pctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral misc control register + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: Peripheral misc control register + +properties: + compatible: + items: + - const: hisilicon,pctrl + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pctrl@fca09000 { + compatible = "hisilicon,pctrl"; + reg = <0xfca09000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml new file mode 100644 index 000000000000..5a53d433b6f0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/sysctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon system controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + The Hisilicon system controller is used on many Hisilicon boards, it can be + used to assist the slave core startup, reboot the system, etc. + + There are some variants of the Hisilicon system controller, such as HiP01, + Hi3519, Hi6220 system controller, each of them is mostly compatible with the + Hisilicon system controller, but some same registers located at different + offset. In addition, the HiP01 system controller has some specific control + registers for HIP01 SoC family, such as slave core boot. + + The compatible names of each system controller are as follows: + Hisilicon system controller --> hisilicon,sysctrl + HiP01 system controller --> hisilicon,hip01-sysctrl + Hi6220 system controller --> hisilicon,hi6220-sysctrl + Hi3519 system controller --> hisilicon,hi3519-sysctrl + +allOf: + - if: + properties: + compatible: + contains: + const: hisilicon,hi6220-sysctrl + then: + required: + - '#clock-cells' + +properties: + compatible: + oneOf: + - items: + - enum: + - hisilicon,sysctrl + - hisilicon,hi6220-sysctrl + - hisilicon,hi3519-sysctrl + - const: syscon + - items: + - const: hisilicon,hip01-sysctrl + - const: hisilicon,sysctrl + + reg: + maxItems: 1 + + smp-offset: + description: | + offset in sysctrl for notifying slave cpu booting + cpu 1, reg; + cpu 2, reg + 0x4; + cpu 3, reg + 0x8; + If reg value is not zero, cpun exit wfi and go + $ref: /schemas/types.yaml#/definitions/uint32 + + resume-offset: + description: offset in sysctrl for notifying cpu0 when resume + $ref: /schemas/types.yaml#/definitions/uint32 + + reboot-offset: + description: offset in sysctrl for system reboot + $ref: /schemas/types.yaml#/definitions/uint32 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +required: + - compatible + - reg + +additionalProperties: + type: object + +examples: + - | + /* Hisilicon system controller */ + system-controller@802000 { + compatible = "hisilicon,sysctrl", "syscon"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x802000 0x1000>; + reg = <0x802000 0x1000>; + + smp-offset = <0x31c>; + resume-offset = <0x308>; + reboot-offset = <0x4>; + + clock: clock@0 { + compatible = "hisilicon,hi3620-clock"; + reg = <0 0x10000>; + #clock-cells = <1>; + }; + }; + + /* HiP01 system controller */ + system-controller@10000000 { + compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl"; + reg = <0x10000000 0x1000>; + reboot-offset = <0x4>; + }; + + /* Hi6220 system controller */ + system-controller@f7030000 { + compatible = "hisilicon,hi6220-sysctrl", "syscon"; + reg = <0xf7030000 0x2000>; + #clock-cells = <1>; + }; + + /* Hi3519 system controller */ + system-controller@12010000 { + compatible = "hisilicon,hi3519-sysctrl", "syscon"; + reg = <0x12010000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt deleted file mode 100644 index 8defacc44dd5..000000000000 --- a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt +++ /dev/null @@ -1,14 +0,0 @@ -* Hisilicon Hi3519 System Controller Block - -This bindings use the following binding: -Documentation/devicetree/bindings/mfd/syscon.yaml - -Required properties: -- compatible: "hisilicon,hi3519-sysctrl". -- reg: the register region of this block - -Examples: -sysctrl: system-controller@12010000 { - compatible = "hisilicon,hi3519-sysctrl", "syscon"; - reg = <0x12010000 0x1000>; -}; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt deleted file mode 100644 index 10bd35f9207f..000000000000 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt +++ /dev/null @@ -1,33 +0,0 @@ -Hisilicon Hip06 Low Pin Count device - Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which - provides I/O access to some legacy ISA devices. - Hip06 is based on arm64 architecture where there is no I/O space. So, the - I/O ports here are not CPU addresses, and there is no 'ranges' property in - LPC device node. - -Required properties: -- compatible: value should be as follows: - (a) "hisilicon,hip06-lpc" - (b) "hisilicon,hip07-lpc" -- #address-cells: must be 2 which stick to the ISA/EISA binding doc. -- #size-cells: must be 1 which stick to the ISA/EISA binding doc. -- reg: base memory range where the LPC register set is mapped. - -Note: - The node name before '@' must be "isa" to represent the binding stick to the - ISA/EISA binding specification. - -Example: - -isa@a01b0000 { - compatible = "hisilicon,hip06-lpc"; - #address-cells = <2>; - #size-cells = <1>; - reg = <0x0 0xa01b0000 0x0 0x1000>; - - ipmi0: bt@e4 { - compatible = "ipmi-bt"; - device_type = "ipmi"; - reg = <0x01 0xe4 0x04>; - }; -}; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt deleted file mode 100644 index a97f643e7d1c..000000000000 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ /dev/null @@ -1,319 +0,0 @@ -Hisilicon Platforms Device Tree Bindings ----------------------------------------------------- -Hi3660 SoC -Required root node properties: - - compatible = "hisilicon,hi3660"; - -HiKey960 Board -Required root node properties: - - compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660"; - -Hi3670 SoC -Required root node properties: - - compatible = "hisilicon,hi3670"; - -HiKey970 Board -Required root node properties: - - compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670"; - -Hi3798cv200 SoC -Required root node properties: - - compatible = "hisilicon,hi3798cv200"; - -Hi3798cv200 Poplar Board -Required root node properties: - - compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200"; - -Hi4511 Board -Required root node properties: - - compatible = "hisilicon,hi3620-hi4511"; - -Hi6220 SoC -Required root node properties: - - compatible = "hisilicon,hi6220"; - -HiKey Board -Required root node properties: - - compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220"; - -HiP01 ca9x2 Board -Required root node properties: - - compatible = "hisilicon,hip01-ca9x2"; - -HiP04 D01 Board -Required root node properties: - - compatible = "hisilicon,hip04-d01"; - -HiP05 D02 Board -Required root node properties: - - compatible = "hisilicon,hip05-d02"; - -HiP06 D03 Board -Required root node properties: - - compatible = "hisilicon,hip06-d03"; - -HiP07 D05 Board -Required root node properties: - - compatible = "hisilicon,hip07-d05"; - -Hisilicon system controller - -Required properties: -- compatible : "hisilicon,sysctrl" -- reg : Register address and size - -Optional properties: -- smp-offset : offset in sysctrl for notifying slave cpu booting - cpu 1, reg; - cpu 2, reg + 0x4; - cpu 3, reg + 0x8; - If reg value is not zero, cpun exit wfi and go -- resume-offset : offset in sysctrl for notifying cpu0 when resume -- reboot-offset : offset in sysctrl for system reboot - -Example: - - /* for Hi3620 */ - sysctrl: system-controller@fc802000 { - compatible = "hisilicon,sysctrl"; - reg = <0xfc802000 0x1000>; - smp-offset = <0x31c>; - resume-offset = <0x308>; - reboot-offset = <0x4>; - }; - ------------------------------------------------------------------------ -Hisilicon Hi3798CV200 Peripheral Controller - -The Hi3798CV200 Peripheral Controller controls peripherals, queries -their status, and configures some functions of peripherals. - -Required properties: -- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon" - and "simple-mfd". -- reg: Register address and size of Peripheral Controller. -- #address-cells: Should be 1. -- #size-cells: Should be 1. - -Examples: - - perictrl: peripheral-controller@8a20000 { - compatible = "hisilicon,hi3798cv200-perictrl", "syscon", - "simple-mfd"; - reg = <0x8a20000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - }; - ------------------------------------------------------------------------ -Hisilicon Hi6220 system controller - -Required properties: -- compatible : "hisilicon,hi6220-sysctrl" -- reg : Register address and size -- #clock-cells: should be set to 1, many clock registers are defined - under this controller and this property must be present. - -Hisilicon designs this controller as one of the system controllers, -its main functions are the same as Hisilicon system controller, but -the register offset of some core modules are different. - -Example: - /*for Hi6220*/ - sys_ctrl: sys_ctrl@f7030000 { - compatible = "hisilicon,hi6220-sysctrl", "syscon"; - reg = <0x0 0xf7030000 0x0 0x2000>; - #clock-cells = <1>; - }; - - -Hisilicon Hi6220 Power Always ON domain controller - -Required properties: -- compatible : "hisilicon,hi6220-aoctrl" -- reg : Register address and size -- #clock-cells: should be set to 1, many clock registers are defined - under this controller and this property must be present. - -Hisilicon designs this system controller to control the power always -on domain for mobile platform. - -Example: - /*for Hi6220*/ - ao_ctrl: ao_ctrl@f7800000 { - compatible = "hisilicon,hi6220-aoctrl", "syscon"; - reg = <0x0 0xf7800000 0x0 0x2000>; - #clock-cells = <1>; - }; - - -Hisilicon Hi6220 Media domain controller - -Required properties: -- compatible : "hisilicon,hi6220-mediactrl" -- reg : Register address and size -- #clock-cells: should be set to 1, many clock registers are defined - under this controller and this property must be present. - -Hisilicon designs this system controller to control the multimedia -domain(e.g. codec, G3D ...) for mobile platform. - -Example: - /*for Hi6220*/ - media_ctrl: media_ctrl@f4410000 { - compatible = "hisilicon,hi6220-mediactrl", "syscon"; - reg = <0x0 0xf4410000 0x0 0x1000>; - #clock-cells = <1>; - }; - - -Hisilicon Hi6220 Power Management domain controller - -Required properties: -- compatible : "hisilicon,hi6220-pmctrl" -- reg : Register address and size -- #clock-cells: should be set to 1, some clock registers are define - under this controller and this property must be present. - -Hisilicon designs this system controller to control the power management -domain for mobile platform. - -Example: - /*for Hi6220*/ - pm_ctrl: pm_ctrl@f7032000 { - compatible = "hisilicon,hi6220-pmctrl", "syscon"; - reg = <0x0 0xf7032000 0x0 0x1000>; - #clock-cells = <1>; - }; - - -Hisilicon Hi6220 SRAM controller - -Required properties: -- compatible : "hisilicon,hi6220-sramctrl", "syscon" -- reg : Register address and size - -Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several -SRAM banks for power management, modem, security, etc. Further, use "syscon" -managing the common sram which can be shared by multiple modules. - -Example: - /*for Hi6220*/ - sram: sram@fff80000 { - compatible = "hisilicon,hi6220-sramctrl", "syscon"; - reg = <0x0 0xfff80000 0x0 0x12000>; - }; - ------------------------------------------------------------------------ -Hisilicon HiP01 system controller - -Required properties: -- compatible : "hisilicon,hip01-sysctrl" -- reg : Register address and size - -The HiP01 system controller is mostly compatible with hisilicon -system controller,but it has some specific control registers for -HIP01 SoC family, such as slave core boot, and also some same -registers located at different offset. - -Example: - - /* for hip01-ca9x2 */ - sysctrl: system-controller@10000000 { - compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl"; - reg = <0x10000000 0x1000>; - reboot-offset = <0x4>; - }; - ------------------------------------------------------------------------ -Hisilicon HiP05/HiP06 PCIe-SAS sub system controller - -Required properties: -- compatible : "hisilicon,pcie-sas-subctrl", "syscon"; -- reg : Register address and size - -The PCIe-SAS sub system controller is shared by PCIe and SAS controllers in -HiP05 or HiP06 Soc to implement some basic configurations. - -Example: - /* for HiP05 PCIe-SAS sub system */ - pcie_sas: system_controller@b0000000 { - compatible = "hisilicon,pcie-sas-subctrl", "syscon"; - reg = <0xb0000000 0x10000>; - }; - -Hisilicon HiP05/HiP06 PERI sub system controller - -Required properties: -- compatible : "hisilicon,peri-subctrl", "syscon"; -- reg : Register address and size - -The PERI sub system controller is shared by peripheral controllers in -HiP05 or HiP06 Soc to implement some basic configurations. The peripheral -controllers include mdio, ddr, iic, uart, timer and so on. - -Example: - /* for HiP05 sub peri system */ - peri_c_subctrl: syscon@80000000 { - compatible = "hisilicon,peri-subctrl", "syscon"; - reg = <0x0 0x80000000 0x0 0x10000>; - }; - -Hisilicon HiP05/HiP06 DSA sub system controller - -Required properties: -- compatible : "hisilicon,dsa-subctrl", "syscon"; -- reg : Register address and size - -The DSA sub system controller is shared by peripheral controllers in -HiP05 or HiP06 Soc to implement some basic configurations. - -Example: - /* for HiP05 dsa sub system */ - pcie_sas: system_controller@a0000000 { - compatible = "hisilicon,dsa-subctrl", "syscon"; - reg = <0xa0000000 0x10000>; - }; - ------------------------------------------------------------------------ -Hisilicon CPU controller - -Required properties: -- compatible : "hisilicon,cpuctrl" -- reg : Register address and size - -The clock registers and power registers of secondary cores are defined -in CPU controller, especially in HIX5HD2 SoC. - ------------------------------------------------------------------------ -PCTRL: Peripheral misc control register - -Required Properties: -- compatible: "hisilicon,pctrl" -- reg: Address and size of pctrl. - -Example: - - /* for Hi3620 */ - pctrl: pctrl@fca09000 { - compatible = "hisilicon,pctrl"; - reg = <0xfca09000 0x1000>; - }; - ------------------------------------------------------------------------ -Fabric: - -Required Properties: -- compatible: "hisilicon,hip04-fabric"; -- reg: Address and size of Fabric - ------------------------------------------------------------------------ -Bootwrapper boot method (software protocol on SMP): - -Required Properties: -- compatible: "hisilicon,hip04-bootwrapper"; -- boot-method: Address and size of boot method. - [0]: bootwrapper physical address - [1]: bootwrapper size - [2]: relocation physical address - [3]: relocation size diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml new file mode 100644 index 000000000000..43b8ce2227aa --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/hisilicon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Platforms Device Tree Bindings + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +properties: + $nodename: + const: '/' + + compatible: + oneOf: + - description: Hi3660 based boards. + items: + - const: hisilicon,hi3660-hikey960 + - const: hisilicon,hi3660 + + - description: Hi3670 based boards. + items: + - const: hisilicon,hi3670-hikey970 + - const: hisilicon,hi3670 + + - description: Hi3798cv200 based boards. + items: + - const: hisilicon,hi3798cv200-poplar + - const: hisilicon,hi3798cv200 + + - description: Hi4511 Board + items: + - const: hisilicon,hi3620-hi4511 + + - description: Hi6220 based boards. + items: + - const: hisilicon,hi6220-hikey + - const: hisilicon,hi6220 + + - description: HiP01 based boards. + items: + - const: hisilicon,hip01-ca9x2 + - const: hisilicon,hip01 + + - description: HiP04 D01 Board + items: + - const: hisilicon,hip04-d01 + + - description: HiP05 D02 Board + items: + - const: hisilicon,hip05-d02 + + - description: HiP06 D03 Board + items: + - const: hisilicon,hip06-d03 + + - description: HiP07 D05 Board + items: + - const: hisilicon,hip07-d05 + + - description: SD5203 based boards + items: + - const: H836ASDJ + - const: hisilicon,sd5203 +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml b/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml new file mode 100644 index 000000000000..3b36e683bb15 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/low-pin-count.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon HiP06 Low Pin Count device + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + Hisilicon HiP06 SoCs implement a Low Pin Count (LPC) controller, which + provides I/O access to some legacy ISA devices. + HiP06 is based on arm64 architecture where there is no I/O space. So, the + I/O ports here are not CPU addresses, and there is no 'ranges' property in + LPC device node. + +properties: + $nodename: + pattern: '^isa@[0-9a-f]+$' + description: | + The node name before '@' must be "isa" to represent the binding stick + to the ISA/EISA binding specification. + + compatible: + enum: + - hisilicon,hip06-lpc + - hisilicon,hip07-lpc + + reg: + maxItems: 1 + + '#address-cells': + const: 2 + + '#size-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +examples: + - | + isa@a01b0000 { + compatible = "hisilicon,hip06-lpc"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xa01b0000 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml index f4f7451e5e8a..f18302efb90e 100644 --- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml +++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml @@ -10,6 +10,8 @@ maintainers: - Linus Walleij <linus.walleij@linaro.org> properties: + $nodename: + const: "/" compatible: oneOf: - items: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index bd7a0fa5801b..ea827e8763de 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -15,6 +15,7 @@ Required Properties: - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys" - "mediatek,mt7629-apmixedsys" - "mediatek,mt8135-apmixedsys" + - "mediatek,mt8167-apmixedsys", "syscon" - "mediatek,mt8173-apmixedsys" - "mediatek,mt8183-apmixedsys", "syscon" - "mediatek,mt8516-apmixedsys" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt index 38309db115f5..b32d374193c7 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt6779-audio", "syscon" - "mediatek,mt7622-audsys", "syscon" - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon" + - "mediatek,mt8167-audiosys", "syscon" - "mediatek,mt8183-audiosys", "syscon" - "mediatek,mt8516-audsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index 1e1f00718a7d..dce4c9241932 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -12,6 +12,7 @@ Required Properties: - "mediatek,mt6779-imgsys", "syscon" - "mediatek,mt6797-imgsys", "syscon" - "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon" + - "mediatek,mt8167-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" - "mediatek,mt8183-imgsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index 49a968be1a80..eb3523c7a7be 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -16,6 +16,7 @@ Required Properties: - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon" - "mediatek,mt7629-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" + - "mediatek,mt8167-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - "mediatek,mt8183-infracfg", "syscon" - "mediatek,mt8516-infracfg", "syscon" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt index ad5f9d2f6818..054424fb64b4 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2712-mfgcfg", "syscon" - "mediatek,mt6779-mfgcfg", "syscon" + - "mediatek,mt8167-mfgcfg", "syscon" - "mediatek,mt8183-mfgcfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index 1af30174b2d0..8723dfe34bab 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -47,6 +47,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | pericfg@10003000 { diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index 9b0394cbbdc9..5ce7578cf274 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -15,6 +15,7 @@ Required Properties: - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen" - "mediatek,mt7629-topckgen" - "mediatek,mt8135-topckgen" + - "mediatek,mt8167-topckgen", "syscon" - "mediatek,mt8173-topckgen" - "mediatek,mt8183-topckgen", "syscon" - "mediatek,mt8516-topckgen" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt index 7894558b7a1c..98195169176a 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt6779-vdecsys", "syscon" - "mediatek,mt6797-vdecsys", "syscon" - "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon" + - "mediatek,mt8167-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" - "mediatek,mt8183-vdecsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml index 1043e4be4fca..c9675c4cdc1b 100644 --- a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml +++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml @@ -30,6 +30,8 @@ properties: Specifies the bpmp node that needs to be queried to get operating point data for all CPUs. +additionalProperties: true + examples: - | cpus { diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index 97df36d301c9..693ef3f185a8 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -93,4 +93,6 @@ properties: required: - compatible +additionalProperties: false + ... diff --git a/Documentation/devicetree/bindings/arm/primecell.yaml b/Documentation/devicetree/bindings/arm/primecell.yaml index 5aae37f1c563..e15fe00aafb2 100644 --- a/Documentation/devicetree/bindings/arm/primecell.yaml +++ b/Documentation/devicetree/bindings/arm/primecell.yaml @@ -33,4 +33,7 @@ properties: contains: const: apb_pclk additionalItems: true + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 6031aee0f5a8..ae6284be9fef 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -73,6 +73,8 @@ description: | foundry 2. properties: + $nodename: + const: "/" compatible: oneOf: - items: diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml index 51cec2b63b04..9672aa0c760d 100644 --- a/Documentation/devicetree/bindings/arm/rda.yaml +++ b/Documentation/devicetree/bindings/arm/rda.yaml @@ -10,6 +10,8 @@ maintainers: - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> properties: + $nodename: + const: "/" compatible: items: - enum: diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml index c9651892710e..cde9c5ec28c8 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml @@ -45,6 +45,9 @@ properties: reg: maxItems: 1 + assigned-clock-parents: true + assigned-clocks: true + '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml deleted file mode 100644 index 3b7811804cb4..000000000000 --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml +++ /dev/null @@ -1,45 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/arm/samsung/sysreg.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Samsung S5P/Exynos SoC series System Registers (SYSREG) - -maintainers: - - Krzysztof Kozlowski <krzk@kernel.org> - -# Custom select to avoid matching all nodes with 'syscon' -select: - properties: - compatible: - contains: - enum: - - samsung,exynos4-sysreg - - samsung,exynos5-sysreg - required: - - compatible - -properties: - compatible: - allOf: - - items: - - enum: - - samsung,exynos4-sysreg - - samsung,exynos5-sysreg - - const: syscon - - reg: - maxItems: 1 - -examples: - - | - syscon@10010000 { - compatible = "samsung,exynos4-sysreg", "syscon"; - reg = <0x10010000 0x400>; - }; - - syscon@10050000 { - compatible = "samsung,exynos5-sysreg", "syscon"; - reg = <0x10050000 0x5000>; - }; diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml index 9f276bc9efa0..8e711bd202fd 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -50,6 +50,8 @@ required: - '#size-cells' - dma-ranges +unevaluatedProperties: false + examples: - | mlahb: ahb@38000000 { diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 790e6dd48e34..696a0101ebcc 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -10,6 +10,8 @@ maintainers: - Alexandre Torgue <alexandre.torgue@st.com> properties: + $nodename: + const: "/" compatible: oneOf: - items: diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index e0b3debaee9e..b4d53290c5f0 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -11,6 +11,8 @@ maintainers: - Jonathan Hunter <jonathanh@nvidia.com> properties: + $nodename: + const: "/" compatible: oneOf: - items: diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml index b71a20af5f70..43fd2f8927d0 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -308,6 +308,8 @@ required: - clocks - '#clock-cells' +additionalProperties: false + dependencies: "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml index 6451928dd2ce..fa16f3767c6a 100644 --- a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml +++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml @@ -64,6 +64,8 @@ allOf: required: - sata +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/ata/imx-sata.txt b/Documentation/devicetree/bindings/ata/imx-sata.txt deleted file mode 100644 index 781f88751762..000000000000 --- a/Documentation/devicetree/bindings/ata/imx-sata.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Freescale i.MX AHCI SATA Controller - -The Freescale i.MX SATA controller mostly conforms to the AHCI interface -with some special extensions at integration level. - -Required properties: -- compatible : should be one of the following: - - "fsl,imx53-ahci" for i.MX53 SATA controller - - "fsl,imx6q-ahci" for i.MX6Q SATA controller - - "fsl,imx6qp-ahci" for i.MX6QP SATA controller -- interrupts : interrupt mapping for SATA IRQ -- reg : registers mapping -- clocks : list of clock specifiers, must contain an entry for each - required entry in clock-names -- clock-names : should include "sata", "sata_ref" and "ahb" entries - -Optional properties: -- fsl,transmit-level-mV : transmit voltage level, in millivolts. -- fsl,transmit-boost-mdB : transmit boost level, in milli-decibels -- fsl,transmit-atten-16ths : transmit attenuation, in 16ths -- fsl,receive-eq-mdB : receive equalisation, in milli-decibels - Please refer to the technical documentation or the driver source code - for the list of legal values for these options. -- fsl,no-spread-spectrum : disable spread-spectrum clocking on the SATA - link. - -Examples: - -sata@2200000 { - compatible = "fsl,imx6q-ahci"; - reg = <0x02200000 0x4000>; - interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SATA>, - <&clks IMX6QDL_CLK_SATA_REF_100M>, - <&clks IMX6QDL_CLK_AHB>; - clock-names = "sata", "sata_ref", "ahb"; -}; diff --git a/Documentation/devicetree/bindings/ata/imx-sata.yaml b/Documentation/devicetree/bindings/ata/imx-sata.yaml new file mode 100644 index 000000000000..68ffb97ddc9b --- /dev/null +++ b/Documentation/devicetree/bindings/ata/imx-sata.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/imx-sata.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX AHCI SATA Controller + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: | + The Freescale i.MX SATA controller mostly conforms to the AHCI interface + with some special extensions at integration level. + +properties: + compatible: + enum: + - fsl,imx53-ahci + - fsl,imx6q-ahci + - fsl,imx6qp-ahci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: sata clock + - description: sata reference clock + - description: ahb clock + + clock-names: + items: + - const: sata + - const: sata_ref + - const: ahb + + fsl,transmit-level-mV: + $ref: /schemas/types.yaml#/definitions/uint32 + description: transmit voltage level, in millivolts. + + fsl,transmit-boost-mdB: + $ref: /schemas/types.yaml#/definitions/uint32 + description: transmit boost level, in milli-decibels. + + fsl,transmit-atten-16ths: + $ref: /schemas/types.yaml#/definitions/uint32 + description: transmit attenuation, in 16ths. + + fsl,receive-eq-mdB: + $ref: /schemas/types.yaml#/definitions/uint32 + description: receive equalisation, in milli-decibels. + + fsl,no-spread-spectrum: + $ref: /schemas/types.yaml#/definitions/flag + description: if present, disable spread-spectrum clocking on the SATA link. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sata@2200000 { + compatible = "fsl,imx6q-ahci"; + reg = <0x02200000 0x4000>; + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_SATA>, + <&clks IMX6QDL_CLK_SATA_REF_100M>, + <&clks IMX6QDL_CLK_AHB>; + clock-names = "sata", "sata_ref", "ahb"; + }; diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml index fc5ebbe7108d..2412894a255d 100644 --- a/Documentation/devicetree/bindings/ata/pata-common.yaml +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml @@ -47,4 +47,6 @@ patternProperties: The ID number of the drive port, 0 for the master port and 1 for the slave port. +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml index 6783a4dec6b5..7ac77b1c5850 100644 --- a/Documentation/devicetree/bindings/ata/sata-common.yaml +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml @@ -47,4 +47,6 @@ patternProperties: multiplier making it possible to connect up to 15 disks to a single SATA port. +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml index 9cc2d5f1beef..6a7b26b049f1 100644 --- a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml +++ b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | cdmm@1bde8000 { diff --git a/Documentation/devicetree/bindings/bus/renesas,bsc.yaml b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml index 7d10b62a52d5..f53a37785413 100644 --- a/Documentation/devicetree/bindings/bus/renesas,bsc.yaml +++ b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml @@ -44,6 +44,8 @@ properties: required: - reg +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml index 33326ffdb266..182134d7a6a3 100644 --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml @@ -61,6 +61,8 @@ anyOf: - required: - power-domains +additionalProperties: true + examples: - | #include <dt-bindings/clock/qcom,gcc-msm8996.h> diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml index a0c6c5d2b70f..49df13fc2f89 100644 --- a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml @@ -57,6 +57,11 @@ properties: "ranges" property should provide a "reasonable" default that is known to work. The software should initialize the bus controller according to it. +patternProperties: + "^.*@[1-5],[1-9a-f][0-9a-f]+$": + description: Devices attached to chip selects + type: object + required: - compatible - reg @@ -64,6 +69,8 @@ required: - "#size-cells" - ranges +additionalProperties: false + examples: - | // In this example, diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml index 6d7396ab8bee..2d98f7c4d3bc 100644 --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml @@ -26,6 +26,8 @@ properties: required: - compatible +additionalProperties: true #fixme + examples: - |+ spi0 { diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml index 4d382128b711..3b45344ed758 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml @@ -36,6 +36,8 @@ properties: - allwinner,sun9i-a80-ccu - allwinner,sun50i-a64-ccu - allwinner,sun50i-a64-r-ccu + - allwinner,sun50i-a100-ccu + - allwinner,sun50i-a100-r-ccu - allwinner,sun50i-h5-ccu - allwinner,sun50i-h6-ccu - allwinner,sun50i-h6-r-ccu @@ -78,6 +80,7 @@ if: - allwinner,sun8i-a83t-r-ccu - allwinner,sun8i-h3-r-ccu - allwinner,sun50i-a64-r-ccu + - allwinner,sun50i-a100-r-ccu - allwinner,sun50i-h6-r-ccu then: @@ -94,7 +97,9 @@ else: if: properties: compatible: - const: allwinner,sun50i-h6-ccu + enum: + - allwinner,sun50i-a100-ccu + - allwinner,sun50i-h6-ccu then: properties: diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml index 444aeea27db8..eb241587efd1 100644 --- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml @@ -89,6 +89,8 @@ required: - compatible - clocks +additionalProperties: false + examples: - | vco1: clock { diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml index 2821425ee445..bd4cefbb1244 100644 --- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml @@ -134,7 +134,11 @@ properties: "#reset-cells": const: 1 -unevaluatedProperties: false + clocks: true + + clock-names: true + +additionalProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml index 97131bfa6f87..624984d51c10 100644 --- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml @@ -101,7 +101,7 @@ properties: clock-names: const: ref_clk -unevaluatedProperties: false +additionalProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index 28c6461b9a9a..2ac1131fd922 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -50,6 +50,15 @@ properties: '#clock-cells': const: 1 + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: [ xin, clkin ] + clocks: + minItems: 1 + maxItems: 2 + patternProperties: "^OUT[1-4]$": type: object @@ -93,19 +102,12 @@ allOf: maxItems: 1 else: # Devices without builtin crystal - properties: - clock-names: - minItems: 1 - maxItems: 2 - items: - enum: [ xin, clkin ] - clocks: - minItems: 1 - maxItems: 2 required: - clock-names - clocks +additionalProperties: false + examples: - | #include <dt-bindings/clk/versaclock.h> diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml index ad21899981af..5e296a00e14f 100644 --- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml @@ -87,6 +87,8 @@ examples: serial@8006c000 { compatible = "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; - interrupts = <24 25 23>; + interrupts = <24>; clocks = <&clks 32>; + dmas = <&dma_apbx 6>, <&dma_apbx 7>; + dma-names = "rx", "tx"; }; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml index f1af1108129e..f831b780f951 100644 --- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml @@ -108,8 +108,10 @@ examples: }; serial@8006a000 { - compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + compatible = "fsl,imx28-auart"; reg = <0x8006a000 0x2000>; - interrupts = <112 70 71>; + interrupts = <112>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; clocks = <&clks 45>; }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml index 92a8e545e212..4f4637eddb8b 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml @@ -57,6 +57,8 @@ required: - interrupts - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml index c97bf95b4150..b83c8f43d664 100644 --- a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml @@ -33,6 +33,8 @@ required: - interrupts - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml index de48924be191..484894a4b23f 100644 --- a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml @@ -49,6 +49,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml index e50cddee43c3..e6c795657c24 100644 --- a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml @@ -53,6 +53,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml index 36ce7667c972..6a51a3f51cd9 100644 --- a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml @@ -49,6 +49,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml new file mode 100644 index 000000000000..625f573a7b90 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8m-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Family Clock Control Module Binding + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: | + NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock + controller, which generates and supplies to all modules. + +properties: + compatible: + enum: + - fsl,imx8mm-ccm + - fsl,imx8mn-ccm + - fsl,imx8mp-ccm + - fsl,imx8mq-ccm + + reg: + maxItems: 1 + + clocks: + minItems: 6 + maxItems: 7 + + clock-names: + minItems: 6 + maxItems: 7 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8m-clock.h + for the full list of i.MX8M clock IDs. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8mq-ccm + then: + properties: + clocks: + minItems: 7 + maxItems: 7 + items: + - description: 32k osc + - description: 25m osc + - description: 27m osc + - description: ext1 clock input + - description: ext2 clock input + - description: ext3 clock input + - description: ext4 clock input + clock-names: + minItems: 7 + maxItems: 7 + items: + - const: ckil + - const: osc_25m + - const: osc_27m + - const: clk_ext1 + - const: clk_ext2 + - const: clk_ext3 + - const: clk_ext4 + else: + properties: + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ext1 clock input + - description: ext2 clock input + - description: ext3 clock input + - description: ext4 clock input + + clock-names: + items: + - const: osc_32k + - const: osc_24m + - const: clk_ext1 + - const: clk_ext2 + - const: clk_ext3 + - const: clk_ext4 + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + clock-controller@30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + + - | + clock-controller@30390000 { + compatible = "fsl,imx8mq-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc_25m>, <&osc_27m>, <&clk_ext1>, + <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; + clock-names = "ckil", "osc_25m", "osc_27m", "clk_ext1", + "clk_ext2", "clk_ext3", "clk_ext4"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml deleted file mode 100644 index ec830db1367b..000000000000 --- a/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml +++ /dev/null @@ -1,68 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/imx8mm-clock.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NXP i.MX8M Mini Clock Control Module Binding - -maintainers: - - Anson Huang <Anson.Huang@nxp.com> - -description: | - NXP i.MX8M Mini clock control module is an integrated clock controller, which - generates and supplies to all modules. - -properties: - compatible: - const: fsl,imx8mm-ccm - - reg: - maxItems: 1 - - clocks: - items: - - description: 32k osc - - description: 24m osc - - description: ext1 clock input - - description: ext2 clock input - - description: ext3 clock input - - description: ext4 clock input - - clock-names: - items: - - const: osc_32k - - const: osc_24m - - const: clk_ext1 - - const: clk_ext2 - - const: clk_ext3 - - const: clk_ext4 - - '#clock-cells': - const: 1 - description: - The clock consumer should specify the desired clock by having the clock - ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h - for the full list of i.MX8M Mini clock IDs. - -required: - - compatible - - reg - - clocks - - clock-names - - '#clock-cells' - -examples: - # Clock Control Module node: - - | - clk: clock-controller@30380000 { - compatible = "fsl,imx8mm-ccm"; - reg = <0x30380000 0x10000>; - #clock-cells = <1>; - clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, - <&clk_ext3>, <&clk_ext4>; - clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", - "clk_ext3", "clk_ext4"; - }; - -... diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml deleted file mode 100644 index bdaa29616ab1..000000000000 --- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml +++ /dev/null @@ -1,70 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/imx8mn-clock.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NXP i.MX8M Nano Clock Control Module Binding - -maintainers: - - Anson Huang <Anson.Huang@nxp.com> - -description: | - NXP i.MX8M Nano clock control module is an integrated clock controller, which - generates and supplies to all modules. - -properties: - compatible: - const: fsl,imx8mn-ccm - - reg: - maxItems: 1 - - clocks: - items: - - description: 32k osc - - description: 24m osc - - description: ext1 clock input - - description: ext2 clock input - - description: ext3 clock input - - description: ext4 clock input - - clock-names: - items: - - const: osc_32k - - const: osc_24m - - const: clk_ext1 - - const: clk_ext2 - - const: clk_ext3 - - const: clk_ext4 - - '#clock-cells': - const: 1 - description: - The clock consumer should specify the desired clock by having the clock - ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h - for the full list of i.MX8M Nano clock IDs. - -required: - - compatible - - reg - - clocks - - clock-names - - '#clock-cells' - -additionalProperties: false - -examples: - # Clock Control Module node: - - | - clk: clock-controller@30380000 { - compatible = "fsl,imx8mn-ccm"; - reg = <0x30380000 0x10000>; - #clock-cells = <1>; - clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, - <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; - clock-names = "osc_32k", "osc_24m", "clk_ext1", - "clk_ext2", "clk_ext3", "clk_ext4"; - }; - -... diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml deleted file mode 100644 index 4351a1dbb4f7..000000000000 --- a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml +++ /dev/null @@ -1,70 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/imx8mp-clock.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NXP i.MX8M Plus Clock Control Module Binding - -maintainers: - - Anson Huang <Anson.Huang@nxp.com> - -description: - NXP i.MX8M Plus clock control module is an integrated clock controller, which - generates and supplies to all modules. - -properties: - compatible: - const: fsl,imx8mp-ccm - - reg: - maxItems: 1 - - clocks: - items: - - description: 32k osc - - description: 24m osc - - description: ext1 clock input - - description: ext2 clock input - - description: ext3 clock input - - description: ext4 clock input - - clock-names: - items: - - const: osc_32k - - const: osc_24m - - const: clk_ext1 - - const: clk_ext2 - - const: clk_ext3 - - const: clk_ext4 - - '#clock-cells': - const: 1 - description: - The clock consumer should specify the desired clock by having the clock - ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h - for the full list of i.MX8M Plus clock IDs. - -required: - - compatible - - reg - - clocks - - clock-names - - '#clock-cells' - -additionalProperties: false - -examples: - # Clock Control Module node: - - | - clk: clock-controller@30380000 { - compatible = "fsl,imx8mp-ccm"; - reg = <0x30380000 0x10000>; - #clock-cells = <1>; - clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, - <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; - clock-names = "osc_32k", "osc_24m", "clk_ext1", - "clk_ext2", "clk_ext3", "clk_ext4"; - }; - -... diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml deleted file mode 100644 index 05d7d1471e0c..000000000000 --- a/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml +++ /dev/null @@ -1,72 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/imx8mq-clock.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NXP i.MX8M Quad Clock Control Module Binding - -maintainers: - - Anson Huang <Anson.Huang@nxp.com> - -description: | - NXP i.MX8M Quad clock control module is an integrated clock controller, which - generates and supplies to all modules. - -properties: - compatible: - const: fsl,imx8mq-ccm - - reg: - maxItems: 1 - - clocks: - items: - - description: 32k osc - - description: 25m osc - - description: 27m osc - - description: ext1 clock input - - description: ext2 clock input - - description: ext3 clock input - - description: ext4 clock input - - clock-names: - items: - - const: ckil - - const: osc_25m - - const: osc_27m - - const: clk_ext1 - - const: clk_ext2 - - const: clk_ext3 - - const: clk_ext4 - - '#clock-cells': - const: 1 - description: - The clock consumer should specify the desired clock by having the clock - ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h - for the full list of i.MX8M Quad clock IDs. - -required: - - compatible - - reg - - clocks - - clock-names - - '#clock-cells' - -examples: - # Clock Control Module node: - - | - clk: clock-controller@30380000 { - compatible = "fsl,imx8mq-ccm"; - reg = <0x30380000 0x10000>; - #clock-cells = <1>; - clocks = <&ckil>, <&osc_25m>, <&osc_27m>, - <&clk_ext1>, <&clk_ext2>, - <&clk_ext3>, <&clk_ext4>; - clock-names = "ckil", "osc_25m", "osc_27m", - "clk_ext1", "clk_ext2", - "clk_ext3", "clk_ext4"; - }; - -... diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml index 1d5e9bcce4c8..33f3010f48c3 100644 --- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml @@ -62,7 +62,7 @@ examples: }; mmc@5b010000 { - compatible = "fsl,imx8qxp-usdhc"; + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, diff --git a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml index 6dc1414bfb7f..f3e1a700a2ca 100644 --- a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml +++ b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml @@ -33,6 +33,8 @@ required: - reg - '#clock-cells' +additionalProperties: false + examples: - | cgu: clock-controller@e0200000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml new file mode 100644 index 000000000000..0cdf53f41f84 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250 + +maintainers: + - Jonathan Marek <jonathan@marek.ca> + +description: | + Qualcomm display clock control module which supports the clocks, resets and + power domains on SM8150 and SM8250. + + See also: + dt-bindings/clock/qcom,dispcc-sm8150.h + dt-bindings/clock/qcom,dispcc-sm8250.h + +properties: + compatible: + enum: + - qcom,sm8150-dispcc + - qcom,sm8250-dispcc + + clocks: + items: + - description: Board XO source + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY0 + - description: Byte clock from DSI PHY1 + - description: Pixel clock from DSI PHY1 + - description: Link clock from DP PHY + - description: VCO DIV clock from DP PHY + + clock-names: + items: + - const: bi_tcxo + - const: dsi0_phy_pll_out_byteclk + - const: dsi0_phy_pll_out_dsiclk + - const: dsi1_phy_pll_out_byteclk + - const: dsi1_phy_pll_out_dsiclk + - const: dp_phy_pll_link_clk + - const: dp_phy_pll_vco_div_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@af00000 { + compatible = "qcom,sm8250-dispcc"; + reg = <0x0af00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml index a5766ff89082..80bd6caf5bc9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -56,6 +56,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml deleted file mode 100644 index 2feea2b91aa9..000000000000 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml +++ /dev/null @@ -1,65 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/qcom,sc7180-videocc.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Video Clock & Reset Controller Binding for SC7180 - -maintainers: - - Taniya Das <tdas@codeaurora.org> - -description: | - Qualcomm video clock control module which supports the clocks, resets and - power domains on SC7180. - - See also dt-bindings/clock/qcom,videocc-sc7180.h. - -properties: - compatible: - const: qcom,sc7180-videocc - - clocks: - items: - - description: Board XO source - - clock-names: - items: - - const: bi_tcxo - - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - -required: - - compatible - - reg - - clocks - - clock-names - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,rpmh.h> - clock-controller@ab00000 { - compatible = "qcom,sc7180-videocc"; - reg = <0x0ab00000 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "bi_tcxo"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; -... diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml index f7a0cf53d5f0..567202942b88 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml @@ -1,23 +1,31 @@ # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- -$id: http://devicetree.org/schemas/clock/qcom,sdm845-videocc.yaml# +$id: http://devicetree.org/schemas/clock/qcom,videocc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Video Clock & Reset Controller Binding for SDM845 +title: Qualcomm Video Clock & Reset Controller Binding maintainers: - Taniya Das <tdas@codeaurora.org> description: | Qualcomm video clock control module which supports the clocks, resets and - power domains on SDM845. + power domains on SDM845/SC7180/SM8150/SM8250. - See also dt-bindings/clock/qcom,videocc-sdm845.h. + See also: + dt-bindings/clock/qcom,videocc-sc7180.h + dt-bindings/clock/qcom,videocc-sdm845.h + dt-bindings/clock/qcom,videocc-sm8150.h + dt-bindings/clock/qcom,videocc-sm8250.h properties: compatible: - const: qcom,sdm845-videocc + enum: + - qcom,sc7180-videocc + - qcom,sdm845-videocc + - qcom,sm8150-videocc + - qcom,sm8250-videocc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml index e13aee8ab61a..9b414fbde6d7 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml @@ -47,6 +47,7 @@ properties: - renesas,r8a77980-cpg-mssr # R-Car V3H - renesas,r8a77990-cpg-mssr # R-Car E3 - renesas,r8a77995-cpg-mssr # R-Car D3 + - renesas,r8a779a0-cpg-mssr # R-Car V3U reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt deleted file mode 100644 index 349808f4fb8c..000000000000 --- a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt +++ /dev/null @@ -1,46 +0,0 @@ -SiFive FU540 PRCI bindings - -On the FU540 family of SoCs, most system-wide clock and reset integration -is via the PRCI IP block. - -Required properties: -- compatible: Should be "sifive,<chip>-prci". Only one value is - supported: "sifive,fu540-c000-prci" -- reg: Should describe the PRCI's register target physical address region -- clocks: Should point to the hfclk device tree node and the rtcclk - device tree node. The RTC clock here is not a time-of-day clock, - but is instead a high-stability clock source for system timers - and cycle counters. -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock via the clock ID -macros defined in include/dt-bindings/clock/sifive-fu540-prci.h. -These macros begin with PRCI_CLK_. - -The hfclk and rtcclk nodes are required, and represent physical -crystals or resonators located on the PCB. These nodes should be present -underneath /, rather than /soc. - -Examples: - -/* under /, in PCB-specific DT data */ -hfclk: hfclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <33333333>; - clock-output-names = "hfclk"; -}; -rtcclk: rtcclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <1000000>; - clock-output-names = "rtcclk"; -}; - -/* under /soc, in SoC-specific DT data */ -prci: clock-controller@10000000 { - compatible = "sifive,fu540-c000-prci"; - reg = <0x0 0x10000000 0x0 0x1000>; - clocks = <&hfclk>, <&rtcclk>; - #clock-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml new file mode 100644 index 000000000000..c3be1b600007 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 SiFive, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sifive/fu540-prci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI) + +maintainers: + - Sagar Kadam <sagar.kadam@sifive.com> + - Paul Walmsley <paul.walmsley@sifive.com> + +description: + On the FU540 family of SoCs, most system-wide clock and reset integration + is via the PRCI IP block. + The clock consumer should specify the desired clock via the clock ID + macros defined in include/dt-bindings/clock/sifive-fu540-prci.h. + These macros begin with PRCI_CLK_. + + The hfclk and rtcclk nodes are required, and represent physical + crystals or resonators located on the PCB. These nodes should be present + underneath /, rather than /soc. + +properties: + compatible: + const: sifive,fu540-c000-prci + + reg: + maxItems: 1 + + clocks: + items: + - description: high frequency clock. + - description: RTL clock. + + clock-names: + items: + - const: hfclk + - const: rtcclk + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#clock-cells" + +additionalProperties: false + +examples: + - | + prci: clock-controller@10000000 { + compatible = "sifive,fu540-c000-prci"; + reg = <0x10000000 0x1000>; + clocks = <&hfclk>, <&rtcclk>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml index c6d091518650..4069e09cb62d 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -73,6 +73,8 @@ else: The 'reg' property for the clock node is also required if there is a sub range of registers for the clocks. +additionalProperties: false + examples: - | ap_clk: clock-controller@21500000 { diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml index 869b18ac88d7..6b419a9878f3 100644 --- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -26,6 +26,8 @@ required: - "#clock-cells" - reg +additionalProperties: false + examples: - | ehrpwm_tbclk: syscon@4140 { diff --git a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt deleted file mode 100644 index 3dd8961154ab..000000000000 --- a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt +++ /dev/null @@ -1,49 +0,0 @@ -Samsung micro-USB 11-pin connector -================================== - -Samsung micro-USB 11-pin connector is an extension of micro-USB connector. -It is present in multiple Samsung mobile devices. -It has additional pins to route MHL traffic simultanously with USB. - -The bindings are superset of usb-connector bindings for micro-USB connector[1]. - -Required properties: -- compatible: must be: "samsung,usb-connector-11pin", "usb-b-connector", -- type: must be "micro". - -Required nodes: -- any data bus to the connector should be modeled using the OF graph bindings - specified in bindings/graph.txt, unless the bus is between parent node and - the connector. Since single connector can have multpile data buses every bus - has assigned OF graph port number as follows: - 0: High Speed (HS), - 3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB. - -[1]: bindings/connector/usb-connector.yaml - -Example -------- - -Micro-USB connector with HS lines routed via controller (MUIC) and MHL lines -connected to HDMI-MHL bridge (sii8620): - -muic-max77843@66 { - ... - usb_con: connector { - compatible = "samsung,usb-connector-11pin", "usb-b-connector"; - label = "micro-USB"; - type = "micro"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@3 { - reg = <3>; - usb_con_mhl: endpoint { - remote-endpoint = <&sii8620_mhl>; - }; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 9bd52e63c935..728f82db073d 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -11,7 +11,8 @@ maintainers: description: A USB connector node represents a physical USB connector. It should be a child - of a USB interface controller. + of a USB interface controller or a separate node when it is attached to both + MUX and USB interface controller. properties: compatible: @@ -25,6 +26,10 @@ properties: - const: gpio-usb-b-connector - const: usb-b-connector + - items: + - const: samsung,usb-connector-11pin + - const: usb-b-connector + label: description: Symbolic name for the connector. @@ -158,6 +163,18 @@ allOf: - required: - id-gpios + - if: + properties: + compatible: + contains: + const: samsung,usb-connector-11pin + then: + properties: + type: + const: micro + +additionalProperties: true + examples: # Micro-USB connector with HS lines routed via controller (MUIC). - | @@ -221,6 +238,33 @@ examples: }; }; + # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220) + # with SS 2:1 MUX. HS lines routed to SoC, SS lines routed to the MUX and + # the output of MUX is connected to the SoC. + - | + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hs_ep: endpoint { + remote-endpoint = <&usb3_hs_ep>; + }; + }; + port@1 { + reg = <1>; + ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_in_ep>; + }; + }; + }; + }; + # USB connector with GPIO control lines - | #include <dt-bindings/gpio/gpio.h> @@ -233,3 +277,33 @@ examples: vbus-supply = <&usb_p0_vbus>; }; }; + + # Micro-USB connector with HS lines routed via controller (MUIC) and MHL + # lines connected to HDMI-MHL bridge (sii8620) on Samsung Exynos5433-based + # mobile phone + - | + muic-max77843 { + usb_con4: connector { + compatible = "samsung,usb-connector-11pin", "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + muic_to_usb: endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + port@3 { + reg = <3>; + usb_con_mhl: endpoint { + remote-endpoint = <&sii8620_mhl>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt index 33856947c561..9299028ee712 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt @@ -8,7 +8,7 @@ Properties: - compatible Usage: required Value type: <string> - Definition: must be "qcom,cpufreq-hw". + Definition: must be "qcom,cpufreq-hw" or "qcom,cpufreq-epss". - clocks Usage: required diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt deleted file mode 100644 index 513499fcdb5b..000000000000 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt +++ /dev/null @@ -1,18 +0,0 @@ -Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28 . - -Required properties: -- compatible : Should be "fsl,<soc>-dcp" -- reg : Should contain MXS DCP registers location and length -- interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ - must be supplied, optionally Secure IRQ can be present, but - is currently not implemented and not used. -- clocks : Clock reference (only required on some SOCs: 6ull and 6sll). -- clock-names : Must be "dcp". - -Example: - -dcp: crypto@80028000 { - compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; - reg = <0x80028000 0x2000>; - interrupts = <52 53>; -}; diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml new file mode 100644 index 000000000000..a30bf38a4a49 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl-dcp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28 + +maintainers: + - Marek Vasut <marex@denx.de> + +properties: + compatible: + enum: + - fsl,imx23-dcp + - fsl,imx28-dcp + + reg: + maxItems: 1 + + interrupts: + description: Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ + must be supplied, optionally Secure IRQ can be present, but is currently + not implemented and not used. + items: + - description: MXS DCP VMI interrupt + - description: MXS DCP DCP interrupt + - description: MXS DCP secure interrupt + minItems: 2 + maxItems: 3 + + clocks: + maxItems: 1 + + clock-names: + const: dcp + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + crypto@80028000 { + compatible = "fsl,imx23-dcp"; + reg = <0x80028000 0x2000>; + interrupts = <53>, <54>; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt deleted file mode 100644 index db690b10e582..000000000000 --- a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt +++ /dev/null @@ -1,15 +0,0 @@ -Freescale SAHARA Cryptographic Accelerator included in some i.MX chips. -Currently only i.MX27 and i.MX53 are supported. - -Required properties: -- compatible : Should be "fsl,<soc>-sahara" -- reg : Should contain SAHARA registers location and length -- interrupts : Should contain SAHARA interrupt number - -Example: - -sah: crypto@10025000 { - compatible = "fsl,imx27-sahara"; - reg = < 0x10025000 0x800>; - interrupts = <75>; -}; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml new file mode 100644 index 000000000000..d531f3af3ea4 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl-imx-sahara.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale SAHARA Cryptographic Accelerator included in some i.MX chips + +maintainers: + - Steffen Trumtrar <s.trumtrar@pengutronix.de> + +properties: + compatible: + enum: + - fsl,imx27-sahara + - fsl,imx53-sahara + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + crypto@10025000 { + compatible = "fsl,imx27-sahara"; + reg = < 0x10025000 0x800>; + interrupts = <75>; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt deleted file mode 100644 index 7aad448e8a36..000000000000 --- a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt +++ /dev/null @@ -1,21 +0,0 @@ -Freescale Security Controller (SCC) - -Required properties: -- compatible : Should be "fsl,imx25-scc". -- reg : Should contain register location and length. -- interrupts : Should contain interrupt numbers for SCM IRQ and SMN IRQ. -- interrupt-names : Should specify the names "scm" and "smn" for the - SCM IRQ and SMN IRQ. -- clocks: Should contain the clock driving the SCC core. -- clock-names: Should be set to "ipg". - -Example: - - scc: crypto@53fac000 { - compatible = "fsl,imx25-scc"; - reg = <0x53fac000 0x4000>; - clocks = <&clks 111>; - clock-names = "ipg"; - interrupts = <49>, <50>; - interrupt-names = "scm", "smn"; - }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml new file mode 100644 index 000000000000..563a31605d2b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl-imx-scc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Security Controller (SCC) + +maintainers: + - Steffen Trumtrar <s.trumtrar@pengutronix.de> + +properties: + compatible: + const: fsl,imx25-scc + + reg: + maxItems: 1 + + interrupts: + items: + - description: SCC SCM interrupt + - description: SCC SMN interrupt + + interrupt-names: + items: + - const: scm + - const: smn + + clocks: + maxItems: 1 + + clock-names: + const: ipg + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + crypto@53fac000 { + compatible = "fsl,imx25-scc"; + reg = <0x53fac000 0x4000>; + clocks = <&clks 111>; + clock-names = "ipg"; + interrupts = <49>, <50>; + interrupt-names = "scm", "smn"; + }; diff --git a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml index 04fe5dfa794a..7743eae049ab 100644 --- a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml +++ b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml @@ -19,7 +19,7 @@ description: |+ properties: compatible: items: - - const: samsung,exynos5433-slim-ss + - const: samsung,exynos5433-slim-sss reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml index 85ef69ffebed..1465c9ebaf93 100644 --- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml +++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml @@ -67,7 +67,7 @@ examples: main_crypto: crypto@4e00000 { compatible = "ti,j721-sa2ul"; - reg = <0x0 0x4e00000 0x0 0x1200>; + reg = <0x4e00000 0x1200>; power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>; dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>; diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index 63f948175239..7aa330dabc44 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -11,9 +11,6 @@ maintainers: - Maxime Ripard <mripard@kernel.org> properties: - "#address-cells": true - "#size-cells": true - compatible: enum: - allwinner,sun6i-a31-mipi-dsi @@ -57,12 +54,7 @@ properties: port should be the input endpoint, usually coming from the associated TCON. -patternProperties: - "^panel@[0-9]+$": true - required: - - "#address-cells" - - "#size-cells" - compatible - reg - interrupts @@ -74,6 +66,7 @@ required: - port allOf: + - $ref: dsi-controller.yaml# - if: properties: compatible: @@ -99,7 +92,7 @@ allOf: clocks: minItems: 1 -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml new file mode 100644 index 000000000000..03a76729d26c --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2711 HDMI Controller Device Tree Bindings + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2711-hdmi0 + - brcm,bcm2711-hdmi1 + + reg: + items: + - description: HDMI controller register range + - description: DVP register range + - description: HDMI PHY register range + - description: Rate Manager register range + - description: Packet RAM register range + - description: Metadata RAM register range + - description: CSC register range + - description: CEC register range + - description: HD register range + + reg-names: + items: + - const: hdmi + - const: dvp + - const: phy + - const: rm + - const: packet + - const: metadata + - const: csc + - const: cec + - const: hd + + clocks: + items: + - description: The HDMI state machine clock + - description: The Pixel BVB clock + - description: The HDMI Audio parent clock + - description: The HDMI CEC parent clock + + clock-names: + items: + - const: hdmi + - const: bvb + - const: audio + - const: cec + + ddc: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + description: > + Phandle of the I2C controller used for DDC EDID probing + + hpd-gpios: + description: > + The GPIO pin for the HDMI hotplug detect (if it doesn't appear + as an interrupt/status bit in the HDMI controller itself) + + dmas: + maxItems: 1 + description: > + Should contain one entry pointing to the DMA channel used to + transfer audio data. + + dma-names: + const: audio-rx + + resets: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - resets + - ddc + +additionalProperties: false + +examples: + - | + hdmi0: hdmi@7ef00700 { + compatible = "brcm,bcm2711-hdmi0"; + reg = <0x7ef00700 0x300>, + <0x7ef00300 0x200>, + <0x7ef00f00 0x80>, + <0x7ef00f80 0x80>, + <0x7ef01b00 0x200>, + <0x7ef01f00 0x400>, + <0x7ef00200 0x80>, + <0x7ef04300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 0>; + ddc = <&ddc0>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml index 3c643b227a70..eb44e072b6e5 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml @@ -9,6 +9,9 @@ title: Broadcom VC4 (VideoCore4) DSI Controller maintainers: - Eric Anholt <eric@anholt.net> +allOf: + - $ref: dsi-controller.yaml# + properties: "#clock-cells": const: 1 diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml index 02410f8d6d49..e826ab0adb75 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: brcm,bcm2835-hvs + enum: + - brcm,bcm2711-hvs + - brcm,bcm2835-hvs reg: maxItems: 1 @@ -19,6 +21,10 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + description: Core Clock + required: - compatible - reg @@ -26,6 +32,16 @@ required: additionalProperties: false +if: + properties: + compatible: + contains: + const: brcm,bcm2711-hvs" + +then: + required: + - clocks + examples: - | hvs@7e400000 { diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml index e60791db1fa1..4e1ba03f6477 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml @@ -15,6 +15,11 @@ properties: - brcm,bcm2835-pixelvalve0 - brcm,bcm2835-pixelvalve1 - brcm,bcm2835-pixelvalve2 + - brcm,bcm2711-pixelvalve0 + - brcm,bcm2711-pixelvalve1 + - brcm,bcm2711-pixelvalve2 + - brcm,bcm2711-pixelvalve3 + - brcm,bcm2711-pixelvalve4 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml index 0dcf0c397375..49a5e041aa49 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml @@ -17,6 +17,7 @@ description: > properties: compatible: enum: + - brcm,bcm2711-vc5 - brcm,bcm2835-vc4 - brcm,cygnus-vc4 diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml new file mode 100644 index 000000000000..74d675fc6e7b --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence MHDP8546 bridge + +maintainers: + - Swapnil Jakhade <sjakhade@cadence.com> + - Yuti Amonkar <yamonkar@cadence.com> + +properties: + compatible: + enum: + - cdns,mhdp8546 + - ti,j721e-mhdp8546 + + reg: + minItems: 1 + maxItems: 2 + items: + - description: + Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P). + The AUX and PMA registers are not part of this range, they are instead + included in the associated PHY. + - description: + Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs. + + reg-names: + minItems: 1 + maxItems: 2 + items: + - const: mhdptx + - const: j721e-intg + + clocks: + maxItems: 1 + description: + DP bridge clock, used by the IP to know how to translate a number of + clock cycles into a time (which is used to comply with DP standard timings + and delays). + + phys: + maxItems: 1 + description: + phandle to the DisplayPort PHY. + + phy-names: + items: + - const: dpphy + + power-domains: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + type: object + description: + Ports as described in Documentation/devicetree/bindings/graph.txt. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: + First input port representing the DP bridge input. + + port@1: + type: object + description: + Second input port representing the DP bridge input. + + port@2: + type: object + description: + Third input port representing the DP bridge input. + + port@3: + type: object + description: + Fourth input port representing the DP bridge input. + + port@4: + type: object + description: + Output port representing the DP bridge output. + + required: + - port@0 + - port@4 + - '#address-cells' + - '#size-cells' + +allOf: + - if: + properties: + compatible: + contains: + const: ti,j721e-mhdp8546 + then: + properties: + reg: + minItems: 2 + reg-names: + minItems: 2 + else: + properties: + reg: + maxItems: 1 + reg-names: + maxItems: 1 + +required: + - compatible + - clocks + - reg + - reg-names + - phys + - phy-names + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + mhdp: dp-bridge@f0fb000000 { + compatible = "cdns,mhdp8546"; + reg = <0xf0 0xfb000000 0x0 0x1000000>; + reg-names = "mhdptx"; + clocks = <&mhdp_clock>; + phys = <&dp_phy>; + phy-names = "dpphy"; + interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_bridge_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + + port@4 { + reg = <4>; + dp_bridge_output: endpoint { + remote-endpoint = <&xxx_dp_connector_input>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index 2c500166c65d..efbb3d0117dc 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -31,6 +31,9 @@ properties: compatible: const: ite,it6505 + reg: + maxItems: 1 + ovdd-supply: maxItems: 1 description: I/O voltage @@ -63,6 +66,8 @@ required: - reset-gpios - extcon +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml new file mode 100644 index 000000000000..d60208359234 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9611 2 Port MIPI to HDMI Bridge + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: | + The LT9611 is a bridge device which converts DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt9611 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vdd-supply: + description: Regulator for 1.8V MIPI phy power. + + vcc-supply: + description: Regulator for 3.3V IO power. + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Primary MIPI port-1 for MIPI input + + properties: + reg: + const: 0 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + port@1: + type: object + description: | + Additional MIPI port-2 for MIPI input, used in combination + with primary MIPI port-1 to drive higher resolution displays + + properties: + reg: + const: 1 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + port@2: + type: object + description: | + HDMI port for HDMI output + + properties: + reg: + const: 2 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@2 + +required: + - compatible + - reg + - interrupts + - vdd-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c10 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <<9611_1v8>; + vcc-supply = <<9611_3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + port@2 { + reg = <2>; + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 68951d56ebba..e5e3c72630cf 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -79,10 +79,16 @@ properties: The GPIO used to control the power down line of this device. maxItems: 1 + power-supply: + maxItems: 1 + required: - compatible - ports +additionalProperties: false + + examples: - | lvds-encoder { diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml index 04099f5bea3f..a125b2dd3a2f 100644 --- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml @@ -14,6 +14,9 @@ description: | NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for the SOCs NWL MIPI-DSI host controller. +allOf: + - $ref: ../dsi-controller.yaml# + properties: compatible: const: fsl,imx8mq-nwl-dsi @@ -30,6 +33,10 @@ properties: '#size-cells': const: 0 + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + clocks: items: - description: DSI core clock @@ -140,10 +147,6 @@ properties: additionalProperties: false -patternProperties: - "^panel@[0-9]+$": - type: object - required: - '#address-cells' - '#size-cells' @@ -159,7 +162,7 @@ required: - reset-names - resets -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -168,7 +171,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/imx8mq-reset.h> - mipi_dsi: mipi_dsi@30a00000 { + dsi@30a00000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx8mq-nwl-dsi"; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index 819f3e31013c..3f6072651182 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -14,8 +14,10 @@ Required properties: - compatible : Shall contain one or more of - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX - "renesas,r8a774b1-hdmi" for R8A774B1 (RZ/G2N) compatible HDMI TX + - "renesas,r8a774e1-hdmi" for R8A774E1 (RZ/G2H) compatible HDMI TX - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX + - "renesas,r8a77961-hdmi" for R8A77961 (R-Car M3-W+) compatible HDMI TX - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 and RZ/G2 compatible HDMI TX @@ -42,7 +44,7 @@ Optional properties: Example: hdmi0: hdmi@fead0000 { - compatible = "renesas,r8a7795-dw-hdmi"; + compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; reg = <0 0xfead0000 0 0x10000>; interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml index baaf2a2a6fed..e5b163951b91 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml @@ -16,11 +16,13 @@ description: | properties: compatible: enum: + - renesas,r8a7742-lvds # for RZ/G1H compatible LVDS encoders - renesas,r8a7743-lvds # for RZ/G1M compatible LVDS encoders - renesas,r8a7744-lvds # for RZ/G1N compatible LVDS encoders - renesas,r8a774a1-lvds # for RZ/G2M compatible LVDS encoders - renesas,r8a774b1-lvds # for RZ/G2N compatible LVDS encoders - renesas,r8a774c0-lvds # for RZ/G2E compatible LVDS encoders + - renesas,r8a774e1-lvds # for RZ/G2H compatible LVDS encoders - renesas,r8a7790-lvds # for R-Car H2 compatible LVDS encoders - renesas,r8a7791-lvds # for R-Car M2-W compatible LVDS encoders - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml index 012aa8e7cb8c..e42cb610f545 100644 --- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -66,3 +66,5 @@ required: - clocks - ports - reg + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml new file mode 100644 index 000000000000..195025e6803c --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The TC358762 is bridge device which converts MIPI DSI to MIPI DPI. + +properties: + compatible: + enum: + - toshiba,tc358762 + + reg: + maxItems: 1 + description: virtual channel number of a DSI peripheral + + vddc-supply: + description: Regulator for 1.2V internal core power. + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + additionalProperties: false + + description: | + Video port for MIPI DSI input + + properties: + reg: + const: 0 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + required: + - reg + + port@1: + type: object + additionalProperties: false + + description: | + Video port for MIPI DPI output (panel or connector). + + properties: + reg: + const: 1 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + +required: + - compatible + - reg + - vddc-supply + - ports + +additionalProperties: false + +examples: + - | + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + reg = <0>; + compatible = "toshiba,tc358762"; + vddc-supply = <&vcc_1v2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml new file mode 100644 index 000000000000..31f085d8ab13 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -0,0 +1,215 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358775 DSI to LVDS bridge bindings + +maintainers: + - Vinay Simha BN <simhavcs@gmail.com> + +description: | + This binding supports DSI to LVDS bridge TC358775 + + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane. + Video frame size: + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel + limited by 135 MHz LVDS speed + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display + panel, limited by 270 MHz LVDS speed. + +properties: + compatible: + const: toshiba,tc358775 + + reg: + maxItems: 1 + description: i2c address of the bridge, 0x0f + + vdd-supply: + maxItems: 1 + description: 1.2V LVDS Power Supply + + vddio-supply: + maxItems: 1 + description: 1.8V IO Power Supply + + stby-gpios: + maxItems: 1 + description: Standby pin, Low active + + reset-gpios: + maxItems: 1 + description: Hardware reset, Low active + + ports: + type: object + description: + A node containing input and output port nodes with endpoint definitions + as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + DSI Input. The remote endpoint phandle should be a + reference to a valid mipi_dsi_host device node. + + port@1: + type: object + description: | + Video port for LVDS output (panel or connector). + + port@2: + type: object + description: | + Video port for Dual link LVDS output (panel or connector). + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + - stby-gpios + - reset-gpios + - ports + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + /* For single-link LVDS display panel */ + + i2c@78b8000 { + /* On High speed expansion */ + label = "HS-I2C2"; + reg = <0x078b8000 0x500>; + clock-frequency = <400000>; /* fastmode operation */ + #address-cells = <1>; + #size-cells = <0>; + + tc_bridge: bridge@f { + compatible = "toshiba,tc358775"; + reg = <0x0f>; + + vdd-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + d2l_in_test: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lvds_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + + dsi@1a98000 { + reg = <0x1a98000 0x25c>; + reg-names = "dsi_ctrl"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&d2l_in_test>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + - | + /* For dual-link LVDS display panel */ + + i2c@78b8000 { + /* On High speed expansion */ + label = "HS-I2C2"; + reg = <0x078b8000 0x500>; + clock-frequency = <400000>; /* fastmode operation */ + #address-cells = <1>; + #size-cells = <0>; + + tc_bridge_dual: bridge@f { + compatible = "toshiba,tc358775"; + reg = <0x0f>; + + vdd-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + d2l_in_dual: endpoint { + remote-endpoint = <&dsi0_out_dual>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in0>; + }; + }; + + port@2 { + reg = <2>; + lvds1_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + }; + + dsi@1a98000 { + reg = <0x1a98000 0x25c>; + reg-names = "dsi_ctrl"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + dsi0_out_dual: endpoint { + remote-endpoint = <&d2l_in_dual>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml index a02039e3aca0..ca21671f6bdd 100644 --- a/Documentation/devicetree/bindings/display/dsi-controller.yaml +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml @@ -73,6 +73,8 @@ patternProperties: required: - reg +additionalProperties: true + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml new file mode 100644 index 000000000000..f1f25aa794d9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 NXP +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: iMX8MQ Display Controller Subsystem (DCSS) + +maintainers: + - Laurentiu Palcu <laurentiu.palcu@nxp.com> + +description: + + The DCSS (display controller sub system) is used to source up to three + display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP + 2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10 + image processing capabilities are included to provide a solution capable of + driving next generation high dynamic range displays. + +properties: + compatible: + const: nxp,imx8mq-dcss + + reg: + items: + - description: DCSS base address and size, up to IRQ steer start + - description: DCSS BLKCTL base address and size + + interrupts: + items: + - description: Context loader completion and error interrupt + - description: DTG interrupt used to signal context loader trigger time + - description: DTG interrupt for Vblank + + interrupt-names: + items: + - const: ctxld + - const: ctxld_kick + - const: vblank + + clocks: + items: + - description: Display APB clock for all peripheral PIO access interfaces + - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL + - description: RTRAM clock + - description: Pixel clock, can be driven either by HDMI phy clock or MIPI + - description: DTRC clock, needed by video decompressor + + clock-names: + items: + - const: apb + - const: axi + - const: rtrm + - const: pix + - const: dtrc + + assigned-clocks: + items: + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM + - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or + IMX8MQ_VIDEO_PLL1_REF_SEL + + assigned-clock-parents: + items: + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M + - description: Phandle and clock specifier of IMX8MQ_CLK_27M + + assigned-clock-rates: + items: + - description: Must be 800 MHz + - description: Must be 400 MHz + + port: + type: object + description: + A port node pointing to the input port of a HDMI/DP or MIPI display bridge. + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + dcss: display-controller@32e00000 { + compatible = "nxp,imx8mq-dcss"; + reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>; + interrupts = <6>, <8>, <9>; + interrupt-names = "ctxld", "ctxld_kick", "vblank"; + interrupt-parent = <&irqsteer>; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>, + <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>, + <&clk IMX8MQ_CLK_DISP_DTRC>; + clock-names = "apb", "axi", "rtrm", "pix", "dtrc"; + assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>, + <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>, + <&clk IMX8MQ_CLK_27M>; + assigned-clock-rates = <800000000>, + <400000000>; + port { + dcss_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt index b91e709db7a4..121220745d46 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt @@ -43,7 +43,7 @@ Required properties (all function blocks): "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt "mediatek,<chip>-disp-mutex" - display mutex "mediatek,<chip>-disp-od" - overdrive - the supported chips are mt2701, mt2712 and mt8173. + the supported chips are mt2701, mt7623, mt2712 and mt8173. - reg: Physical base address and length of the function block register space - interrupts: The interrupt signal from the function block (required, except for merge and split function blocks). diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt index 77def4456706..dc1ebd13cc88 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt @@ -7,7 +7,7 @@ output bus. Required properties: - compatible: "mediatek,<chip>-dpi" - the supported chips are mt2701 , mt8173 and mt8183. + the supported chips are mt2701, mt7623, mt8173 and mt8183. - reg: Physical base address and length of the controller's registers - interrupts: The interrupt signal from the function block. - clocks: device clocks diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index 8e4729de8c85..f06f24d405a5 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -7,7 +7,7 @@ channel output. Required properties: - compatible: "mediatek,<chip>-dsi" - the supported chips are mt2701, mt8173 and mt8183. +- the supported chips are mt2701, mt7623, mt8173 and mt8183. - reg: Physical base address and length of the controller's registers - interrupts: The interrupt signal from the function block. - clocks: device clocks @@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY. Required properties: - compatible: "mediatek,<chip>-mipi-tx" - the supported chips are mt2701, mt8173 and mt8183. +- the supported chips are mt2701, 7623, mt8173 and mt8183. - reg: Physical base address and length of the controller's registers - clocks: PLL reference clock - clock-output-names: name of the output clock line to the DSI encoder diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt index 7b124242b0c5..6b1c586403e4 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt @@ -6,6 +6,7 @@ its parallel input. Required properties: - compatible: Should be "mediatek,<chip>-hdmi". +- the supported chips are mt2701, mt7623 and mt8173 - reg: Physical base address and length of the controller's registers - interrupts: The interrupt signal from the function block. - clocks: device clocks @@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication. Required properties: - compatible: Should be "mediatek,<chip>-cec" +- the supported chips are mt7623 and mt8173 - reg: Physical base address and length of the controller's registers - interrupts: The interrupt signal from the function block. - clocks: device clock @@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices. Required properties: - compatible: Should be "mediatek,<chip>-hdmi-ddc" +- the supported chips are mt7623 and mt8173 - reg: Physical base address and length of the controller's registers - clocks: device clock - clock-names: Should be "ddc-i2c". @@ -56,6 +59,7 @@ output and drives the HDMI pads. Required properties: - compatible: "mediatek,<chip>-hdmi-phy" +- the supported chips are mt2701, mt7623 and mt8173 - reg: Physical base address and length of the module's registers - clocks: PLL reference clock - clock-names: must contain "pll_ref" diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index 7884fd7a85c1..b9a64d3ff184 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -90,6 +90,8 @@ Required properties: * "qcom,dsi-phy-14nm-660" * "qcom,dsi-phy-10nm" * "qcom,dsi-phy-10nm-8998" + * "qcom,dsi-phy-7nm" + * "qcom,dsi-phy-7nm-8150" - reg: Physical base address and length of the registers of PLL, PHY. Some revisions require the PHY regulator base address, whereas others require the PHY lane base address. See below for each PHY revision. @@ -98,7 +100,7 @@ Required properties: * "dsi_pll" * "dsi_phy" * "dsi_phy_regulator" - For DSI 14nm and 10nm PHYs: + For DSI 14nm, 10nm and 7nm PHYs: * "dsi_pll" * "dsi_phy" * "dsi_phy_lane" @@ -116,7 +118,7 @@ Required properties: - vcca-supply: phandle to vcca regulator device node For 14nm PHY: - vcca-supply: phandle to vcca regulator device node - For 10nm PHY: + For 10nm and 7nm PHY: - vdds-supply: phandle to vdds regulator device node Optional properties: diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index 53056dd02597..fe55611d2603 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -89,6 +89,8 @@ required: - iommus - operating-points-v2 +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gpucc-sdm845.h> diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index 76a9068a85dd..c60b3bd74337 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -13,7 +13,9 @@ properties: compatible: items: - enum: - - bananapi,lhr050h41 + - bananapi,lhr050h41 + - feixin,k101-im2byl02 + - const: ilitek,ili9881c backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml index 946dd354256c..31164608ba1d 100644 --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml @@ -112,4 +112,6 @@ oneOf: - required: - ports +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml new file mode 100644 index 000000000000..937323cc9aaa --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel + +maintainers: + - Guido Günther <agx@sigxcpu.org> + +description: + Mantix MLAF057WE51 X is a 720x1440 TFT LCD panel connected using + a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + - mantix,mlaf057we51-x + + port: true + reg: + maxItems: 1 + description: DSI virtual channel + + avdd-supply: + description: Positive analog power supply + + avee-supply: + description: Negative analog power supply + + vddi-supply: + description: 1.8V I/O voltage supply + + reset-gpios: true + + backlight: true + +required: + - compatible + - reg + - avdd-supply + - avee-supply + - vddi-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "mantix,mlaf057we51-x"; + reg = <0>; + avdd-supply = <®_avdd>; + avee-supply = <®_avee>; + vddi-supply = <®_1v8_p>; + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index 45fe8fe5faba..cd6dc5461721 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -163,4 +163,6 @@ dependencies: width-mm: [ height-mm ] height-mm: [ width-mm ] +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 6deeeed59e59..edb53ab0d9eb 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -29,6 +29,8 @@ properties: # compatible must be listed in alphabetical order, ordered by compatible. # The description in the comment is mandatory for each compatible. + # Ampire AM-1280800N3TZQW-T00H 10.1" WQVGA TFT LCD panel + - ampire,am-1280800n3tzqw-t00h # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel - ampire,am-480272h3tmqw-t01h # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel @@ -87,6 +89,8 @@ properties: - cdtech,s070swv29hg-dc44 # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel - cdtech,s070wv95-ct16 + # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel + - chefree,ch101olhlwh-002 # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel - chunghwa,claa070wp03xg # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel @@ -159,6 +163,8 @@ properties: - innolux,n156bge-l21 # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel - innolux,zj070na-01p + # King & Display KD116N21-30NV-A010 eDP TFT LCD panel + - kingdisplay,kd116n21-30nv-a010 # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - koe,tx14d24vm1bpa # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel @@ -219,6 +225,8 @@ properties: - osddisplays,osd070t1718-19ts # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel - osddisplays,osd101t2045-53ts + # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel + - powertip,ph800480t013-idf02 # QiaoDian XianShi Corporation 4"3 TFT LCD panel - qiaodian,qd43003c0-40 # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800 diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml index d5733ef30954..09b5eb7542f8 100644 --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml @@ -8,10 +8,11 @@ title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel maintainers: - Ondrej Jirman <megi@xff.cz> + - Guido GÅnther <agx@sigxcpu.org> -description: | - Rocktech JH057N00900 is a 720x1440 TFT LCD panel - connected using a MIPI-DSI video interface. +description: + Rocktech JH057N00900 is a 720x1440 TFT LCD panel + connected using a MIPI-DSI video interface. allOf: - $ref: panel-common.yaml# @@ -19,9 +20,9 @@ allOf: properties: compatible: enum: - # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel + # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel - rocktech,jh057n00900 - # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel + # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel - xingbangda,xbd599 port: true @@ -35,13 +36,9 @@ properties: iovcc-supply: description: I/O voltage supply - reset-gpios: - description: GPIO used for the reset pin - maxItems: 1 + reset-gpios: true - backlight: - description: Backlight used by the panel - $ref: "/schemas/types.yaml#/definitions/phandle" + backlight: true required: - compatible @@ -57,15 +54,16 @@ examples: #include <dt-bindings/gpio/gpio.h> dsi { - #address-cells = <1>; - #size-cells = <0>; - panel@0 { - compatible = "rocktech,jh057n00900"; - reg = <0>; - vcc-supply = <®_2v8_p>; - iovcc-supply = <®_1v8_p>; - reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; - backlight = <&backlight>; - }; + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + }; }; + ... diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml index 96bdde9298e0..ccc482570d6a 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml @@ -12,6 +12,17 @@ maintainers: allOf: - $ref: panel-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - samsung,s6e3ha2 + - samsung,s6e3hf2 + then: + required: + - enable-gpios + properties: compatible: enum: @@ -39,7 +50,6 @@ required: - vdd3-supply - vci-supply - reset-gpios - - enable-gpios additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml index a51660b73f28..6f1f02044b4b 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml @@ -72,6 +72,8 @@ required: - spi-max-frequency - port +unevaluatedProperties: false + examples: - |+ spi { diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index 51cd4d162770..7d65c24fcda8 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -3,6 +3,7 @@ Required Properties: - compatible: must be one of the following. + - "renesas,du-r8a7742" for R8A7742 (RZ/G1H) compatible DU - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU @@ -10,6 +11,7 @@ Required Properties: - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU + - "renesas,du-r8a774e1" for R8A774E1 (RZ/G2H) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU @@ -18,6 +20,7 @@ Required Properties: - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU + - "renesas,du-r8a77961" for R8A77961 (R-Car M3-W+) compatible DU - "renesas,du-r8a77965" for R8A77965 (R-Car M3-N) compatible DU - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU - "renesas,du-r8a77980" for R8A77980 (R-Car V3H) compatible DU @@ -68,6 +71,7 @@ corresponding to each DU output. Port0 Port1 Port2 Port3 ----------------------------------------------------------------------------- + R8A7742 (RZ/G1H) DPAD 0 LVDS 0 LVDS 1 - R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - @@ -75,6 +79,7 @@ corresponding to each DU output. R8A774A1 (RZ/G2M) DPAD 0 HDMI 0 LVDS 0 - R8A774B1 (RZ/G2N) DPAD 0 HDMI 0 LVDS 0 - R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 - + R8A774E1 (RZ/G2H) DPAD 0 HDMI 0 LVDS 0 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - @@ -83,6 +88,7 @@ corresponding to each DU output. R8A7794 (R-Car E2) DPAD 0 DPAD 1 - - R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0 R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 - + R8A77961 (R-Car M3-W+) DPAD 0 HDMI 0 LVDS 0 - R8A77965 (R-Car M3-N) DPAD 0 HDMI 0 LVDS 0 - R8A77970 (R-Car V3M) DPAD 0 LVDS 0 - - R8A77980 (R-Car V3H) DPAD 0 LVDS 0 - - diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt index 27333b9551b3..2dcb6d12d137 100644 --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt +++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt @@ -19,6 +19,7 @@ Optional properties: - vbat-supply: The supply for VBAT - solomon,segment-no-remap: Display needs normal (non-inverted) data column to segment mapping + - solomon,col-offset: Offset of columns (COL/SEG) that the screen is mapped to. - solomon,com-seq: Display uses sequential COM pin configuration - solomon,com-lrremap: Display uses left-right COM pin remap - solomon,com-invdir: Display uses inverted COM pin scan direction diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml index 69cc7e8bf15a..327a14d85df8 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -13,6 +13,9 @@ maintainers: description: The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller. +allOf: + - $ref: dsi-controller.yaml# + properties: compatible: const: st,stm32-dsi @@ -65,24 +68,6 @@ properties: description: DSI output port node, connected to a panel or a bridge input port" -patternProperties: - "^(panel|panel-dsi)@[0-9]$": - type: object - description: - A node containing the panel or bridge description as documented in - Documentation/devicetree/bindings/display/mipi-dsi-bus.txt - properties: - port: - type: object - description: - Panel or bridge port node, connected to the DSI output port (port@1) - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - required: - "#address-cells" - "#size-cells" @@ -92,7 +77,7 @@ required: - clock-names - ports -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 47319214b5f6..ac63ae4a3861 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -51,8 +51,16 @@ of the following host1x client modules: - vi - Tegra210: - power-domains: Must include venc powergate node as vi is in VE partition. - - Tegra210 has CSI part of VI sharing same host interface and register space. - So, VI device node should have CSI child node. + + ports (optional node) + vi can have optional ports node and max 6 ports are supported. Each port + should have single 'endpoint' child node. All port nodes are grouped under + ports node. Please refer to the bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt + + csi (required node) + Tegra210 has CSI part of VI sharing same host interface and register space. + So, VI device node should have CSI child node. - csi: mipi csi interface to vi @@ -65,6 +73,46 @@ of the following host1x client modules: - power-domains: Must include sor powergate node as csicil is in SOR partition. + channel (optional nodes) + Maximum 6 channels are supported with each csi brick as either x4 or x2 + based on hw connectivity to sensor. + + Required properties: + - reg: csi port number. Valid port numbers are 0 through 5. + - nvidia,mipi-calibrate: Should contain a phandle and a specifier + specifying which pads are used by this CSI port and need to be + calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt. + + Each channel node must contain 2 port nodes which can be grouped + under 'ports' node and each port should have a single child 'endpoint' + node. + + ports node + Please refer to the bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt + + ports node must contain below 2 port nodes. + port@0 with single child 'endpoint' node always a sink. + port@1 with single child 'endpoint' node always a source. + + port@0 (required node) + Required properties: + - reg: 0 + + endpoint (required node) + Required properties: + - data-lanes: an array of data lane from 1 to 4. Valid array + lengths are 1/2/4. + - remote-endpoint: phandle to sensor 'endpoint' node. + + port@1 (required node) + Required properties: + - reg: 1 + + endpoint (required node) + Required properties: + - remote-endpoint: phandle to vi port 'endpoint' node. + - epp: encoder pre-processor Required properties: @@ -340,6 +388,18 @@ Example: ranges = <0x0 0x0 0x54080000 0x2000>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + imx219_vi_in0: endpoint { + remote-endpoint = <&imx219_csi_out0>; + }; + }; + }; + csi@838 { compatible = "nvidia,tegra210-csi"; reg = <0x838 0x1300>; @@ -362,6 +422,34 @@ Example: <&tegra_car TEGRA210_CLK_CSI_TPG>; clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg"; power-domains = <&pd_sor>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + nvidia,mipi-calibrate = <&mipi 0x001>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + imx219_csi_in0: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&imx219_out0>; + }; + }; + + port@1 { + reg = <1>; + imx219_csi_out0: endpoint { + remote-endpoint = <&imx219_vi_in0>; + }; + }; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt index 8b2a71395647..3e64075ac7ec 100644 --- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt +++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt @@ -37,7 +37,7 @@ Optional nodes: supports a single port with a single endpoint. - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and - Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt for connecting + Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml for connecting tfp410 DVI encoder or lcd panel to lcdc [1] There is an errata about AM335x color wiring. For 16-bit color mode diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml index 52a939cade3b..7b9d468c3e52 100644 --- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -145,10 +145,10 @@ examples: display@fd4a0000 { compatible = "xlnx,zynqmp-dpsub-1.7"; - reg = <0x0 0xfd4a0000 0x0 0x1000>, - <0x0 0xfd4aa000 0x0 0x1000>, - <0x0 0xfd4ab000 0x0 0x1000>, - <0x0 0xfd4ac000 0x0 0x1000>; + reg = <0xfd4a0000 0x1000>, + <0xfd4aa000 0x1000>, + <0xfd4ab000 0x1000>, + <0xfd4ac000 0x1000>; reg-names = "dp", "blend", "av_buf", "aud"; interrupts = <0 119 4>; interrupt-parent = <&gic>; diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index c36592683340..307b499e8968 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -49,3 +49,5 @@ properties: required: - "#dma-cells" + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml index c39f6de76670..0043b91da95e 100644 --- a/Documentation/devicetree/bindings/dma/dma-controller.yaml +++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml @@ -17,6 +17,8 @@ properties: $nodename: pattern: "^dma-controller(@.*)?$" +additionalProperties: true + examples: - | dma: dma-controller@48000000 { diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml index 5b5f07393135..4cee5667b8a8 100644 --- a/Documentation/devicetree/bindings/dma/dma-router.yaml +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml @@ -36,6 +36,8 @@ required: - "#dma-cells" - dma-masters +additionalProperties: true + examples: - | sdma_xbar: dma-router@4a002b78 { diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml index 92794c500589..00f19b3cac31 100644 --- a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml +++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml @@ -62,6 +62,8 @@ required: - interrupts - clocks +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/jz4780-cgu.h> diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml index 13f1a46be40d..b548e4723936 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml @@ -16,6 +16,7 @@ properties: compatible: items: - enum: + - renesas,dmac-r8a7742 # RZ/G1H - renesas,dmac-r8a7743 # RZ/G1M - renesas,dmac-r8a7744 # RZ/G1N - renesas,dmac-r8a7745 # RZ/G1E diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml index 20870f5c14dd..ef1d6879c158 100644 --- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml +++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml @@ -18,12 +18,15 @@ properties: const: snps,dma-spear1340 "#dma-cells": - const: 3 + minimum: 3 + maximum: 4 description: | First cell is a phandle pointing to the DMA controller. Second one is the DMA request line number. Third cell is the memory master identifier for transfers on dynamically allocated channel. Fourth cell is the - peripheral master identifier for transfers on an allocated channel. + peripheral master identifier for transfers on an allocated channel. Fifth + cell is an optional mask of the DMA channels permitted to be allocated + for the corresponding client device. reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml index 71987878e4ae..2a5325f480f6 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml @@ -81,6 +81,8 @@ required: - clocks - interrupts +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml index 915bc4af9568..c8d2b51d8410 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml @@ -33,6 +33,8 @@ required: - reg - dma-masters +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml index c66543d0c267..c30be840be1c 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml @@ -84,6 +84,8 @@ required: - clocks - interrupts +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index dd70ddab4fd1..9a87fd9041eb 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -141,6 +141,8 @@ then: required: - ti,udma-atype +unevaluatedProperties: false + examples: - |+ cbass_main { diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml index 5de510f8c88c..2a595b18ff6c 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml +++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml @@ -57,7 +57,7 @@ examples: dma: dma-controller@fd4c0000 { compatible = "xlnx,zynqmp-dpdma"; - reg = <0x0 0xfd4c0000 0x0 0x1000>; + reg = <0xfd4c0000 0x1000>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; clocks = <&dpdma_clk>; diff --git a/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml new file mode 100644 index 000000000000..a25387df0865 --- /dev/null +++ b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/edac/amazon,al-mc-edac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amazon's Annapurna Labs Memory Controller EDAC + +maintainers: + - Talel Shenhar <talel@amazon.com> + - Talel Shenhar <talelshenhar@gmail.com> + +description: | + EDAC node is defined to describe on-chip error detection and correction for + Amazon's Annapurna Labs Memory Controller. + +properties: + + compatible: + const: amazon,al-mc-edac + + reg: + maxItems: 1 + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: uncorrectable error interrupt + - description: correctable error interrupt + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + - const: ue + - const: ce + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + edac@f0080000 { + #address-cells = <2>; + #size-cells = <2>; + compatible = "amazon,al-mc-edac"; + reg = <0x0 0xf0080000 0x0 0x00010000>; + interrupt-parent = <&amazon_al_system_fabric>; + interrupt-names = "ue"; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml index 9272d2bd8634..3b6842e92d1b 100644 --- a/Documentation/devicetree/bindings/edac/dmc-520.yaml +++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml @@ -49,6 +49,8 @@ required: - interrupts - interrupt-names +additionalProperties: false + examples: - | dmc0: dmc@200000 { diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 4cee72d53318..6edfa705b486 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -114,6 +114,9 @@ properties: - const: renesas,r1ex24128 - const: atmel,24c128 + label: + description: Descriptive name of the EEPROM. + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/eeprom/at25.txt b/Documentation/devicetree/bindings/eeprom/at25.txt deleted file mode 100644 index fcacd97abd0a..000000000000 --- a/Documentation/devicetree/bindings/eeprom/at25.txt +++ /dev/null @@ -1,45 +0,0 @@ -EEPROMs (SPI) compatible with Atmel at25. - -Required properties: -- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25". - Example "<vendor>,<type>" values: - "anvo,anv32e61w" - "microchip,25lc040" - "st,m95m02" - "st,m95256" - -- reg : chip select number -- spi-max-frequency : max spi frequency to use -- pagesize : size of the eeprom page -- size : total eeprom size in bytes -- address-width : number of address bits (one of 8, 9, 16, or 24). - For 9 bits, the MSB of the address is sent as bit 3 of the instruction - byte, before the address byte. - -Optional properties: -- spi-cpha : SPI shifted clock phase, as per spi-bus bindings. -- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings. -- read-only : this parameter-less property disables writes to the eeprom -- wp-gpios : GPIO to which the write-protect pin of the chip is connected - -Obsolete legacy properties can be used in place of "size", "pagesize", -"address-width", and "read-only": -- at25,byte-len : total eeprom size in bytes -- at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h -- at25,page-size : size of the eeprom page - -Additional compatible properties are also allowed. - -Example: - eeprom@0 { - compatible = "st,m95256", "atmel,at25"; - reg = <0> - spi-max-frequency = <5000000>; - spi-cpha; - spi-cpol; - wp-gpios = <&gpio1 3 0>; - - pagesize = <64>; - size = <32768>; - address-width = <16>; - }; diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml new file mode 100644 index 000000000000..9810619a2b5c --- /dev/null +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/eeprom/at25.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: SPI EEPROMs compatible with Atmel's AT25 + +maintainers: + - Christian Eggers <ceggers@arri.de> + +properties: + $nodename: + pattern: "^eeprom@[0-9a-f]{1,2}$" + + # There are multiple known vendors who manufacture EEPROM chips compatible + # with Atmel's AT25. The compatible string requires two items where the + # 'vendor' and 'model' parts of the first are the actual chip and the second + # item is fixed to "atmel,at25". Some existing bindings only have the + # "atmel,at25" part and should be fixed by somebody who knows vendor and + # product. + compatible: + oneOf: + - items: + - enum: + - anvo,anv32e61w + - atmel,at25256B + - fujitsu,mb85rs1mt + - fujitsu,mb85rs64 + - microchip,at25160bn + - microchip,25lc040 + - st,m95m02 + - st,m95256 + + - const: atmel,at25 + + # Please don't use this alternative for new bindings. + - items: + - const: atmel,at25 + + reg: + description: + Chip select number. + + spi-max-frequency: true + + pagesize: + $ref: /schemas/types.yaml#definitions/uint32 + enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072] + description: + Size of the eeprom page. + + size: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Total eeprom size in bytes. + + address-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 9, 16, 24 ] + description: + Number of address bits. + For 9 bits, the MSB of the address is sent as bit 3 of the instruction + byte, before the address byte. + + spi-cpha: true + + spi-cpol: true + + read-only: + description: + Disable writes to the eeprom. + type: boolean + + wp-gpios: + maxItems: 1 + description: + GPIO to which the write-protect pin of the chip is connected. + + # Deprecated: at25,byte-len, at25,addr-mode, at25,page-size + at25,byte-len: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Total eeprom size in bytes. Deprecated, use "size" property instead. + deprecated: true + + at25,addr-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Addr-mode flags, as defined in include/linux/spi/eeprom.h. + Deprecated, use "address-width" property instead. + deprecated: true + + at25,page-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Size of the eeprom page. Deprecated, use "pagesize" property instead. + deprecated: true + +required: + - compatible + - reg + - spi-max-frequency + - pagesize + - size + - address-width + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "st,m95256", "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + wp-gpios = <&gpio1 3 0>; + + pagesize = <64>; + size = <32768>; + address-width = <16>; + }; + }; diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index 822975dbeafa..a97f39109f8d 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -81,6 +81,8 @@ properties: maxItems: 1 description: bus clock. A description is only needed for a single item if there's something unique to add. + The items should have a fixed order, so pattern matching names are + discouraged. clock-names: items: @@ -97,6 +99,8 @@ properties: A variable number of interrupts warrants a description of what conditions affect the number of interrupts. Otherwise, descriptions on standard properties are not necessary. + The items should have a fixed order, so pattern matching names are + discouraged. interrupt-names: # minItems must be specified here because the default would be 2 @@ -196,14 +200,24 @@ required: # # If the conditionals become too unweldy, then it may be better to just split # the binding into separate schema documents. -if: - properties: - compatible: - contains: - const: vendor,soc2-ip -then: - required: - - foo-supply +allOf: + - if: + properties: + compatible: + contains: + const: vendor,soc2-ip + then: + required: + - foo-supply + # Altering schema depending on presence of properties is usually done by + # dependencies (see above), however some adjustments might require if: + - if: + required: + - vendor,bool-property + then: + properties: + vendor,int-property: + enum: [2, 4, 6] # Ideally, the schema should have this line otherwise any other properties # present are allowed. There's a few common properties such as 'status' and @@ -211,6 +225,9 @@ then: # # This can't be used in cases where another schema is referenced # (i.e. allOf: [{$ref: ...}]). +# If and only if another schema is referenced and arbitrary children nodes can +# appear, "unevaluatedProperties: false" could be used. A typical example is +# an I2C controller where no name pattern matching for children can be added. additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt deleted file mode 100644 index 936fbdf12815..000000000000 --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt +++ /dev/null @@ -1,27 +0,0 @@ -* PTN5150 CC (Configuration Channel) Logic device - -PTN5150 is a small thin low power CC logic chip supporting the USB Type-C -connector application with CC control logic detection and indication functions. -It is interfaced to the host controller using an I2C interface. - -Required properties: -- compatible: should be "nxp,ptn5150" -- reg: specifies the I2C slave address of the device -- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin - connected to the PTN5150's INTB pin. -- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which - is used to control VBUS. -- pinctrl-names : a pinctrl state named "default" must be defined. -- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus - control. - -Example: - ptn5150@1d { - compatible = "nxp,ptn5150"; - reg = <0x1d>; - int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>; - vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&ptn5150_default>; - status = "okay"; - }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml new file mode 100644 index 000000000000..4b0f414486d2 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PTN5150 CC (Configuration Channel) Logic device + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + PTN5150 is a small thin low power CC logic chip supporting the USB Type-C + connector application with CC control logic detection and indication + functions. It is interfaced to the host controller using an I2C interface. + +properties: + compatible: + const: nxp,ptn5150 + + int-gpios: + deprecated: true + description: + GPIO pin (input) connected to the PTN5150's INTB pin. + Use "interrupts" instead. + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + vbus-gpios: + description: + GPIO pin (output) used to control VBUS. If skipped, no such control + takes place. + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ptn5150@1d { + compatible = "nxp,ptn5150"; + reg = <0x1d>; + interrupt-parent = <&msmgpio>; + interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; + vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml index f9845dc2f5ae..5fe784f487c5 100644 --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml @@ -123,3 +123,5 @@ properties: $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 0 maximum: 3 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt index b758f91914f7..9853fefff5d8 100644 --- a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt +++ b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt @@ -12,6 +12,13 @@ Required properties: - pinctrl-0: phandle to pinctrl node - pinctrl-names: pinctrl state +Optional properties: + - cfam-reset-gpios: GPIO for CFAM reset + + - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled) + - fsi-mux-gpios: GPIO for detecting the desired FSI mux state + + Examples: fsi-master { @@ -21,4 +28,9 @@ Examples: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fsi1_default>; clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + + fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>; + + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>; }; diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml index b26d4b4be743..e425278653f5 100644 --- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - ibm,fsi2spi + - ibm,fsi2spi-restricted reg: items: @@ -28,6 +29,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | fsi2spi@1c00 { diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml index 0b223abe8cfb..f57d22d1ebd6 100644 --- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml @@ -11,12 +11,33 @@ maintainers: properties: compatible: - enum: - - fsl,imx1-gpio - - fsl,imx21-gpio - - fsl,imx31-gpio - - fsl,imx35-gpio - - fsl,imx7d-gpio + oneOf: + - enum: + - fsl,imx1-gpio + - fsl,imx21-gpio + - fsl,imx31-gpio + - fsl,imx35-gpio + - fsl,imx7d-gpio + - items: + - const: fsl,imx35-gpio + - const: fsl,imx31-gpio + - items: + - enum: + - fsl,imx50-gpio + - fsl,imx51-gpio + - fsl,imx53-gpio + - fsl,imx6q-gpio + - fsl,imx6sl-gpio + - fsl,imx6sll-gpio + - fsl,imx6sx-gpio + - fsl,imx6ul-gpio + - fsl,imx7d-gpio + - fsl,imx8mm-gpio + - fsl,imx8mn-gpio + - fsl,imx8mp-gpio + - fsl,imx8mq-gpio + - fsl,imx8qxp-gpio + - const: fsl,imx35-gpio reg: maxItems: 1 @@ -41,6 +62,28 @@ properties: const: 2 gpio-controller: true + gpio-line-names: true + gpio-ranges: true + + power-domains: + maxItems: 1 + +patternProperties: + "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$": + type: object + properties: + gpio-hog: true + gpios: true + input: true + output-high: true + output-low: true + line-name: true + + required: + - gpio-hog + - gpios + + additionalProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt b/Documentation/devicetree/bindings/gpio/gpio-max732x.txt deleted file mode 100644 index b3a9c0c32823..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt +++ /dev/null @@ -1,58 +0,0 @@ -* MAX732x-compatible I/O expanders - -Required properties: - - compatible: Should be one of the following: - - "maxim,max7319": For the Maxim MAX7319 - - "maxim,max7320": For the Maxim MAX7320 - - "maxim,max7321": For the Maxim MAX7321 - - "maxim,max7322": For the Maxim MAX7322 - - "maxim,max7323": For the Maxim MAX7323 - - "maxim,max7324": For the Maxim MAX7324 - - "maxim,max7325": For the Maxim MAX7325 - - "maxim,max7326": For the Maxim MAX7326 - - "maxim,max7327": For the Maxim MAX7327 - - reg: I2C slave address for this device. - - gpio-controller: Marks the device node as a GPIO controller. - - #gpio-cells: Should be 2. - - first cell is the GPIO number - - second cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. - Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. - -Optional properties: - - The I/O expander can detect input state changes, and thus optionally act as - an interrupt controller. When the expander interrupt line is connected all the - following properties must be set. For more information please see the - interrupt controller device tree bindings documentation available at - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt. - - - interrupt-controller: Identifies the node as an interrupt controller. - - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2. - - first cell is the pin number - - second cell is used to specify flags - - interrupts: Interrupt specifier for the controllers interrupt. - -Please refer to gpio.txt in this directory for details of the common GPIO -bindings used by client devices. - -Example 1. MAX7325 with interrupt support enabled (CONFIG_GPIO_MAX732X_IRQ=y): - - expander: max7325@6d { - compatible = "maxim,max7325"; - reg = <0x6d>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gpio4>; - interrupts = <29 IRQ_TYPE_EDGE_FALLING>; - }; - -Example 2. MAX7325 with interrupt support disabled (CONFIG_GPIO_MAX732X_IRQ=n): - - expander: max7325@6d { - compatible = "maxim,max7325"; - reg = <0x6d>; - gpio-controller; - #gpio-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt deleted file mode 100644 index 3126c3817e2a..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt +++ /dev/null @@ -1,90 +0,0 @@ -* NXP PCA953x I2C GPIO multiplexer - -Required properties: - - compatible: Has to contain one of the following: - nxp,pca6416 - nxp,pca9505 - nxp,pca9534 - nxp,pca9535 - nxp,pca9536 - nxp,pca9537 - nxp,pca9538 - nxp,pca9539 - nxp,pca9554 - nxp,pca9555 - nxp,pca9556 - nxp,pca9557 - nxp,pca9574 - nxp,pca9575 - nxp,pca9698 - nxp,pcal6416 - nxp,pcal6524 - nxp,pcal9535 - nxp,pcal9555a - maxim,max7310 - maxim,max7312 - maxim,max7313 - maxim,max7315 - ti,pca6107 - ti,pca9536 - ti,tca6408 - ti,tca6416 - ti,tca6424 - ti,tca9539 - ti,tca9554 - onnn,cat9554 - onnn,pca9654 - exar,xra1202 - - gpio-controller: if used as gpio expander. - - #gpio-cells: if used as gpio expander. - - interrupt-controller: if to be used as interrupt expander. - - #interrupt-cells: if to be used as interrupt expander. - -Optional properties: - - interrupts: interrupt specifier for the device's interrupt output. - - reset-gpios: GPIO specification for the RESET input. This is an - active low signal to the PCA953x. - - vcc-supply: power supply regulator. - -Example: - - - gpio@20 { - compatible = "nxp,pca9505"; - reg = <0x20>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pca9505>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&gpio3>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; - }; - - -Example with Interrupts: - - - gpio99: gpio@22 { - compatible = "nxp,pcal6524"; - reg = <0x22>; - interrupt-parent = <&gpio6>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */ - interrupt-controller; - #interrupt-cells = <2>; - vcc-supply = <&vdds_1v8_main>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = - "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03", "vibra", "fault2", "p06", "p07", - "en-usb", "en-host1", "en-host2", "chg-int", "p14", "p15", "mic-int", "en-modem", - "shdn-hs-amp", "chg-status+red", "green", "blue", "en-esata", "fault1", "p26", "p27"; - }; - - ts3a227@3b { - compatible = "ti,ts3a227e"; - reg = <0x3b>; - interrupt-parent = <&gpio99>; - interrupts = <14 IRQ_TYPE_EDGE_RISING>; - ti,micbias = <0>; /* 2.1V */ - }; - diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml new file mode 100644 index 000000000000..183ec23eda39 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml @@ -0,0 +1,232 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA95xx I2C GPIO multiplexer + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: |+ + Bindings for the family of I2C GPIO multiplexers/expanders: NXP PCA95xx, + Maxim MAX73xx + +properties: + compatible: + enum: + - exar,xra1202 + - maxim,max7310 + - maxim,max7312 + - maxim,max7313 + - maxim,max7315 + - maxim,max7319 + - maxim,max7320 + - maxim,max7321 + - maxim,max7322 + - maxim,max7323 + - maxim,max7324 + - maxim,max7325 + - maxim,max7326 + - maxim,max7327 + - nxp,pca6416 + - nxp,pca9505 + - nxp,pca9534 + - nxp,pca9535 + - nxp,pca9536 + - nxp,pca9537 + - nxp,pca9538 + - nxp,pca9539 + - nxp,pca9554 + - nxp,pca9555 + - nxp,pca9556 + - nxp,pca9557 + - nxp,pca9574 + - nxp,pca9575 + - nxp,pca9698 + - nxp,pcal6416 + - nxp,pcal6524 + - nxp,pcal9535 + - nxp,pcal9555a + - onnn,cat9554 + - onnn,pca9654 + - ti,pca6107 + - ti,pca9536 + - ti,tca6408 + - ti,tca6416 + - ti,tca6424 + - ti,tca9539 + - ti,tca9554 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-line-names: + minItems: 1 + maxItems: 32 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + reset-gpios: + description: + GPIO specification for the RESET input. This is an active low signal to + the PCA953x. Not valid for Maxim MAX732x devices. + + vcc-supply: + description: + Optional power supply. Not valid for Maxim MAX732x devices. + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + +patternProperties: + "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$": + type: object + properties: + gpio-hog: true + gpios: true + input: true + output-high: true + output-low: true + line-name: true + + required: + - gpio-hog + - gpios + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - maxim,max7320 + - maxim,max7321 + - maxim,max7322 + - maxim,max7323 + - maxim,max7324 + - maxim,max7325 + - maxim,max7326 + - maxim,max7327 + then: + properties: + reset-gpios: false + vcc-supply: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + gpio@20 { + compatible = "nxp,pca9505"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9505>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio3>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + + usb3-sata-sel-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "usb3_sata_sel"; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + gpio99: gpio@22 { + compatible = "nxp,pcal6524"; + reg = <0x22>; + interrupt-parent = <&gpio6>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */ + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <&vdds_1v8_main>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03", + "vibra", "fault2", "p06", "p07", "en-usb", + "en-host1", "en-host2", "chg-int", "p14", "p15", + "mic-int", "en-modem", "shdn-hs-amp", + "chg-status+red", "green", "blue", "en-esata", + "fault1", "p26", "p27"; + }; + + ts3a227@3b { + compatible = "ti,ts3a227e"; + reg = <0x3b>; + interrupt-parent = <&gpio99>; + interrupts = <14 IRQ_TYPE_EDGE_RISING>; + ti,micbias = <0>; /* 2.1V */ + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + /* MAX7325 with interrupt support enabled */ + gpio@6d { + compatible = "maxim,max7325"; + reg = <0x6d>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio4>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + }; + }; + + - | + i2c3 { + #address-cells = <1>; + #size-cells = <0>; + + /* MAX7325 with interrupt support disabled */ + gpio@6e { + compatible = "maxim,max7325"; + reg = <0x6e>; + gpio-controller; + #gpio-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt deleted file mode 100644 index ae254aadee35..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Freescale VF610 PORT/GPIO module - -The Freescale PORT/GPIO modules are two adjacent modules providing GPIO -functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of -each, and each PORT module has its own interrupt. - -Required properties for GPIO node: -- compatible : Should be "fsl,<soc>-gpio", below is supported list: - "fsl,vf610-gpio" - "fsl,imx7ulp-gpio" -- reg : The first reg tuple represents the PORT module, the second tuple - the GPIO module. -- interrupts : Should be the port interrupt shared by all 32 pins. -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells : Should be 2. The first cell is the GPIO number. - The second cell bits[3:0] is used to specify trigger type and level flags: - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. - -Optional properties: --clocks: Must contain an entry for each entry in clock-names. - See common clock-bindings.txt for details. --clock-names: A list of clock names. For imx7ulp, it must contain - "gpio", "port". - -Note: Each GPIO port should have an alias correctly numbered in "aliases" -node. - -Examples: - -aliases { - gpio0 = &gpio1; - gpio1 = &gpio2; -}; - -gpio1: gpio@40049000 { - compatible = "fsl,vf610-gpio"; - reg = <0x40049000 0x1000 0x400ff000 0x40>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 0 32>; -}; - -gpio2: gpio@4004a000 { - compatible = "fsl,vf610-gpio"; - reg = <0x4004a000 0x1000 0x400ff040 0x40>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 32 32>; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml new file mode 100644 index 000000000000..19738a457a58 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-vf610.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale VF610 PORT/GPIO module + +maintainers: + - Stefan Agner <stefan@agner.ch> + +description: | + The Freescale PORT/GPIO modules are two adjacent modules providing GPIO + functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of + each, and each PORT module has its own interrupt. + + Note: Each GPIO port should have an alias correctly numbered in "aliases" + node. + +properties: + compatible: + oneOf: + - const: fsl,vf610-gpio + - items: + - const: fsl,imx7ulp-gpio + - const: fsl,vf610-gpio + + reg: + description: The first reg tuple represents the PORT module, the second tuple + represents the GPIO module. + maxItems: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + "#gpio-cells": + const: 2 + + gpio-controller: true + + clocks: + items: + - description: SoC GPIO clock + - description: SoC PORT clock + + clock-names: + items: + - const: gpio + - const: port + + gpio-ranges: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - "#gpio-cells" + - gpio-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpio1: gpio@40049000 { + compatible = "fsl,vf610-gpio"; + reg = <0x40049000 0x1000>, <0x400ff000 0x40>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 0 32>; + }; diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml new file mode 100644 index 000000000000..e2d2c10e536a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO driver for the sl28cpld board management controller + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + + There are three flavors of the GPIO controller, one full featured + input/output with interrupt support (kontron,sl28cpld-gpio), one + output-only (kontron,sl28-gpo) and one input-only (kontron,sl28-gpi). + + Each controller supports 8 GPIO lines. + +properties: + compatible: + enum: + - kontron,sl28cpld-gpio + - kontron,sl28cpld-gpi + - kontron,sl28cpld-gpo + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + "#gpio-cells": + const: 2 + + gpio-controller: true + + gpio-line-names: + minItems: 1 + maxItems: 8 + +required: + - compatible + - "#gpio-cells" + - gpio-controller + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml index 313b17229247..bd35cbf7fa09 100644 --- a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml @@ -51,7 +51,10 @@ properties: gpio-controller: true + gpio-line-names: true + gpio-ranges: + minItems: 1 maxItems: 8 required: diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml index 3ad229307bd5..5026662e4508 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml @@ -37,6 +37,7 @@ properties: - renesas,gpio-r8a774a1 # RZ/G2M - renesas,gpio-r8a774b1 # RZ/G2N - renesas,gpio-r8a774c0 # RZ/G2E + - renesas,gpio-r8a774e1 # RZ/G2H - renesas,gpio-r8a7795 # R-Car H3 - renesas,gpio-r8a7796 # R-Car M3-W - renesas,gpio-r8a77961 # R-Car M3-W+ diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt index d4d83916c09d..be329ea4794f 100644 --- a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt +++ b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt @@ -20,8 +20,9 @@ Required properties: - gpio-controller : Marks the device node as a GPIO controller - interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt - interrupt-controller : Mark the GPIO controller as an interrupt-controller -- ngpios : number of GPIO lines, see gpio.txt - (should be multiple of 8, up to 80 pins) +- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose + 2 software GPIOs per hardware GPIO: one for hardware input, one for hardware + output. Up to 80 pins, must be a multiple of 8. - clocks : A phandle to the APB clock for SGPM clock division - bus-frequency : SGPM CLK frequency diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml index 1240f6289249..b391cc1b4590 100644 --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml @@ -61,8 +61,14 @@ patternProperties: '#gpio-cells': const: 2 + ngpios: + default: 32 + minimum: 1 + maximum: 32 + snps,nr-gpios: description: The number of GPIO pins exported by the port. + deprecated: true $ref: /schemas/types.yaml#/definitions/uint32 default: 32 minimum: 1 diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml index c58ff9a94f45..1a54db04f29d 100644 --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml @@ -64,6 +64,8 @@ required: - gpio-ranges - socionext,interrupt-ranges +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 80d519a76db2..e9c42b59f30f 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -74,6 +74,7 @@ properties: - const: bus mali-supply: true + opp-table: true power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml index 6226d31ec4b7..53708fe9e004 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml @@ -8,7 +8,7 @@ title: ARM Mali Utgard GPU maintainers: - Rob Herring <robh@kernel.org> - - Maxime Ripard <maxime.ripard@free-electrons.com> + - Maxime Ripard <mripard@kernel.org> - Heiko Stuebner <heiko@sntech.de> properties: @@ -100,6 +100,8 @@ properties: mali-supply: true + opp-table: true + power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml index 665c6e3b31d3..62486f55177d 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml @@ -22,6 +22,12 @@ properties: interrupts: maxItems: 1 + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml index 4843df1ddbb6..3ed172629974 100644 --- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml @@ -21,12 +21,19 @@ properties: interrupts: maxItems: 1 + '#cooling-cells': + const: 2 + + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + clocks: items: - description: AXI/master interface clock - description: GPU core clock - description: Shader clock (only required if GPU has feature PIPE_3D) - - description: AHB/slave interface clock (only required if GPU can gate + - description: AHB/slave interface clock (only required if GPU can gate slave interface independently) minItems: 1 maxItems: 4 diff --git a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt deleted file mode 100644 index 8d365f89694c..000000000000 --- a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt +++ /dev/null @@ -1,41 +0,0 @@ -TI HwSpinlock for OMAP and K3 based SoCs -========================================= - -Required properties: -- compatible: Should be one of the following, - "ti,omap4-hwspinlock" for - OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs - "ti,am654-hwspinlock" for - K3 AM65x and J721E SoCs -- reg: Contains the hwspinlock module register address space - (base address and length) -- ti,hwmods: Name of the hwmod associated with the hwspinlock device - (for OMAP architecture based SoCs only) -- #hwlock-cells: Should be 1. The OMAP hwspinlock users will use a - 0-indexed relative hwlock number as the argument - specifier value for requesting a specific hwspinlock - within a hwspinlock bank. - -Please look at the generic hwlock binding for usage information for consumers, -"Documentation/devicetree/bindings/hwlock/hwlock.txt" - -Example: - -1. OMAP4 SoCs -hwspinlock: spinlock@4a0f6000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x4a0f6000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; -}; - -2. AM65x SoCs and J721E SoCs -&cbass_main { - cbass_main_navss: interconnect0 { - hwspinlock: spinlock@30e00000 { - compatible = "ti,am654-hwspinlock"; - reg = <0x00 0x30e00000 0x00 0x1000>; - #hwlock-cells = <1>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml new file mode 100644 index 000000000000..ac35491a6f65 --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwlock/ti,omap-hwspinlock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI HwSpinlock for OMAP and K3 based SoCs + +maintainers: + - Suman Anna <s-anna@ti.com> + +properties: + compatible: + enum: + - ti,omap4-hwspinlock # for OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs + - ti,am654-hwspinlock # for K3 AM65x, J721E and J7200 SoCs + + reg: + maxItems: 1 + + "#hwlock-cells": + const: 1 + description: | + The OMAP hwspinlock users will use a 0-indexed relative hwlock number as + the argument specifier value for requesting a specific hwspinlock within + a hwspinlock bank. + + Please look at the generic hwlock binding for usage information for + consumers, "Documentation/devicetree/bindings/hwlock/hwlock.txt" + +required: + - compatible + - reg + - "#hwlock-cells" + +additionalProperties: false + +examples: + + - | + /* OMAP4 SoCs */ + hwspinlock: spinlock@4a0f6000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x4a0f6000 0x1000>; + #hwlock-cells = <1>; + }; + + - | + / { + /* K3 AM65x SoCs */ + model = "Texas Instruments K3 AM654 SoC"; + compatible = "ti,am654-evm", "ti,am654"; + #address-cells = <2>; + #size-cells = <2>; + + bus@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>; /* Main NavSS */ + + bus@30800000 { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>; + + spinlock@30e00000 { + compatible = "ti,am654-hwspinlock"; + reg = <0x00 0x30e00000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml new file mode 100644 index 000000000000..43b4f4f57b49 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,adm1266.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADM1266 Cascadable Super Sequencer with Margin + Control and Fault Recording + +maintainers: + - Alexandru Tachici <alexandru.tachici@analog.com> + +description: | + Analog Devices ADM1266 Cascadable Super Sequencer with Margin + Control and Fault Recording. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf + +properties: + compatible: + enum: + - adi,adm1266 + + reg: + description: | + I2C address of slave device. + items: + minimum: 0x40 + maximum: 0x4F + + avcc-supply: + description: | + Phandle to the Avcc power supply. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + adm1266@40 { + compatible = "adi,adm1266"; + reg = <0x40>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index 7898b9dba5a5..6747b870f297 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -44,6 +44,8 @@ required: - interrupts - pulses-per-revolution +additionalProperties: false + examples: - | fpga_axi: fpga-axi { diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml index dfa821c0aacc..ad0ec9f35bd8 100644 --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -65,6 +65,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml index 84ae4cdd08ed..00a6511354e6 100644 --- a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml +++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml @@ -79,7 +79,7 @@ properties: minimum: 0 maximum: 7130 -unevaluatedProperties: false +additionalProperties: false required: - compatible @@ -99,7 +99,7 @@ examples: interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>; - baikal,pvt-temp-trim-millicelsius = <1000>; + baikal,pvt-temp-offset-millicelsius = <1000>; clocks = <&ccu_sys>, <&ccu_sys>; clock-names = "ref", "pclk"; diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml new file mode 100644 index 000000000000..010333cb25c0 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hardware monitoring driver for the sl28cpld board management controller + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + +properties: + compatible: + enum: + - kontron,sl28cpld-fan + + reg: + maxItems: 1 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/lm75.txt b/Documentation/devicetree/bindings/hwmon/lm75.txt deleted file mode 100644 index 273616702c51..000000000000 --- a/Documentation/devicetree/bindings/hwmon/lm75.txt +++ /dev/null @@ -1,39 +0,0 @@ -*LM75 hwmon sensor. - -Required properties: -- compatible: manufacturer and chip name, one of - "adi,adt75", - "dallas,ds1775", - "dallas,ds75", - "dallas,ds7505", - "gmt,g751", - "national,lm75", - "national,lm75a", - "national,lm75b", - "maxim,max6625", - "maxim,max6626", - "maxim,max31725", - "maxim,max31726", - "maxim,mcp980x", - "nxp,pct2075", - "st,stds75", - "st,stlm75", - "microchip,tcn75", - "ti,tmp100", - "ti,tmp101", - "ti,tmp105", - "ti,tmp112", - "ti,tmp175", - "ti,tmp275", - "ti,tmp75", - "ti,tmp75b", - "ti,tmp75c", - -- reg: I2C bus address of the device - -Example: - -sensor@48 { - compatible = "st,stlm75"; - reg = <0x48>; -}; diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml new file mode 100644 index 000000000000..96eed5cc7841 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/lm75.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LM75 hwmon sensor + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +properties: + compatible: + enum: + - adi,adt75 + - dallas,ds1775 + - dallas,ds75 + - dallas,ds7505 + - gmt,g751 + - national,lm75 + - national,lm75a + - national,lm75b + - maxim,max6625 + - maxim,max6626 + - maxim,max31725 + - maxim,max31726 + - maxim,mcp980x + - nxp,pct2075 + - st,stds75 + - st,stlm75 + - microchip,tcn75 + - ti,tmp100 + - ti,tmp101 + - ti,tmp105 + - ti,tmp112 + - ti,tmp175 + - ti,tmp275 + - ti,tmp75 + - ti,tmp75b + - ti,tmp75c + + reg: + maxItems: 1 + + vs-supply: + description: phandle to the regulator that provides the +VS supply + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "st,stlm75"; + reg = <0x48>; + vs-supply = <&vs>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml new file mode 100644 index 000000000000..93e86e3b4602 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/maxim,max20730.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim max20730 + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +description: | + The MAX20730 is a fully integrated, highly efficient switching regulator + with PMBus for applications operating from 4.5V to 16V and requiring + up to 25A (max) load. This single-chip regulator provides extremely + compact, high efficiency power-delivery solutions with high-precision + output voltages and excellent transient response. + + Datasheets: + https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf + https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf + https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf + +properties: + compatible: + enum: + - maxim,max20730 + - maxim,max20734 + - maxim,max20743 + + reg: + maxItems: 1 + + vout-voltage-divider: + description: | + If voltage divider present at vout, the voltage at voltage sensor pin + will be scaled. The properties will convert the raw reading to a more + meaningful number if voltage divider present. It has two numbers, + the first number is the output resistor, the second number is the total + resistance. Therefore, the adjusted vout is equal to + Vout = Vout * output_resistance / total resistance. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + max20730@10 { + compatible = "maxim,max20730"; + reg = <0x10>; + vout-voltage-divider = <1000 2000>; // vout would be scaled to 0.5 + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml new file mode 100644 index 000000000000..6f3e3c01f717 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Moortec Semiconductor MR75203 PVT Controller bindings + +maintainers: + - Rahul Tanwar <rtanwar@maxlinear.com> + +properties: + compatible: + const: moortec,mr75203 + + reg: + items: + - description: PVT common registers + - description: PVT temprature sensor registers + - description: PVT process detector registers + - description: PVT voltage monitor registers + + reg-names: + items: + - const: common + - const: ts + - const: pd + - const: vm + + intel,vm-map: + description: + PVT controller has 5 VM (voltage monitor) sensors. + vm-map defines CPU core to VM instance mapping. A + value of 0xff means that VM sensor is unused. + $ref: /schemas/types.yaml#definitions/uint8-array + maxItems: 5 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - reg-names + - intel,vm-map + - clocks + - resets + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + pvt: pvt@e0680000 { + compatible = "moortec,mr75203"; + reg = <0xe0680000 0x80>, + <0xe0680080 0x180>, + <0xe0680200 0x200>, + <0xe0680400 0xc00>; + reg-names = "common", "ts", "pd", "vm"; + intel,vm-map = [03 01 04 ff ff]; + clocks = <&osc0>; + resets = <&rcu0 0x40 7>; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml new file mode 100644 index 000000000000..c523a1beb2b7 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SHTC1 Humidity and Temperature Sensor IC + +maintainers: + - Christopher Ruehl chris.ruehl@gtsys.com.hk + +description: | + The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor + designed especially for battery-driven high-volume consumer electronics + applications. + For further information refere to Documentation/hwmon/shtc1.rst + + This binding document describes the binding for the hardware monitor + portion of the driver. + +properties: + compatible: + enum: + - sensirion,shtc1 + - sensirion,shtw1 + - sensirion,shtc3 + + reg: + const: 0x70 + + sensirion,blocking-io: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, the driver hold the i2c bus until measurement is finished. + + sensirion,low-precision: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, the sensor aquire data with low precision (not recommended). + The driver aquire data with high precision by default. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + + shtc3@70 { + compatible = "sensirion,shtc3"; + reg = <0x70>; + sensirion,blocking-io; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml index 49cad273c8e5..6ecb0270d88d 100644 --- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml @@ -36,6 +36,8 @@ required: - interrupts - clocks +unevaluatedProperties: false + examples: - | i2c@c8100500 { diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml index dc0952f3780f..1ca1cd19bd1d 100644 --- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml +++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml @@ -44,6 +44,8 @@ required: - clocks - interrupts +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml index 78ffcab2428c..cc3aa2a5e70b 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml @@ -70,4 +70,6 @@ required: - sda-gpios - scl-gpios +unevaluatedProperties: false + ... diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml index ac0bc5dd64d6..29b9447f3b84 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml @@ -9,12 +9,18 @@ title: Freescale Low Power Inter IC (LPI2C) for i.MX maintainers: - Anson Huang <Anson.Huang@nxp.com> +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + properties: compatible: - enum: - - fsl,imx7ulp-lpi2c - - fsl,imx8qxp-lpi2c - - fsl,imx8qm-lpi2c + oneOf: + - enum: + - fsl,imx7ulp-lpi2c + - fsl,imx8qm-lpi2c + - items: + - const: fsl,imx8qxp-lpi2c + - const: fsl,imx7ulp-lpi2c reg: maxItems: 1 @@ -22,23 +28,34 @@ properties: interrupts: maxItems: 1 + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + clock-frequency: true + + clock-names: + maxItems: 1 + clocks: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg - interrupts - clocks -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/clock/imx7ulp-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - lpi2c7@40a50000 { + i2c@40a50000 { compatible = "fsl,imx7ulp-lpi2c"; reg = <0x40A50000 0x10000>; interrupt-parent = <&intc>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml index 810536953177..f23966b0d6c6 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml @@ -9,6 +9,9 @@ title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX maintainers: - Wolfram Sang <wolfram@the-dreams.de> +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + properties: compatible: oneOf: @@ -19,6 +22,9 @@ properties: - const: fsl,imx35-i2c - const: fsl,imx1-i2c - items: + - const: fsl,imx7d-i2c + - const: fsl,imx21-i2c + - items: - enum: - fsl,imx25-i2c - fsl,imx27-i2c @@ -75,7 +81,7 @@ required: - interrupts - clocks -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index 790aa7218ee0..7f254d79558c 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -117,6 +117,8 @@ then: required: - rockchip,grf +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/rk3188-cru-common.h> diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index a21c359b9f02..df41f72afc87 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -87,6 +87,11 @@ wants to support one of the below features, it should adapt these bindings. this information to detect a stalled bus more reliably, for example. Can not be combined with 'multi-master'. +- smbus + states that additional SMBus restrictions and features apply to this bus. + Examples of features are SMBusHostNotify and SMBusAlert. Examples of + restrictions are more reserved addresses and timeout definitions. + Required properties (per child device) -------------------------------------- diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml index 682ed1bbf5c6..0e7b4b8a7e48 100644 --- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml @@ -17,9 +17,13 @@ properties: pattern: "^i2c@[0-9a-f]+$" compatible: - enum: - - ingenic,jz4780-i2c - - ingenic,x1000-i2c + oneOf: + - enum: + - ingenic,jz4770-i2c + - ingenic,x1000-i2c + - items: + - const: ingenic,jz4780-i2c + - const: ingenic,jz4770-i2c reg: maxItems: 1 @@ -60,7 +64,7 @@ examples: #include <dt-bindings/dma/jz4780-dma.h> #include <dt-bindings/interrupt-controller/irq.h> i2c@10054000 { - compatible = "ingenic,jz4780-i2c"; + compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x10054000 0x1000>; diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt new file mode 100644 index 000000000000..566ea861aa00 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt @@ -0,0 +1,42 @@ +Device tree configuration for the Mellanox I2C SMBus on BlueField SoCs + +Required Properties: + +- compatible : should be "mellanox,i2c-mlxbf1" or "mellanox,i2c-mlxbf2". + +- reg : address offset and length of the device registers. The + registers consist of the following set of resources: + 1) Smbus block registers. + 2) Cause master registers. + 3) Cause slave registers. + 4) Cause coalesce registers (if compatible isn't set + to "mellanox,i2c-mlxbf1"). + +- interrupts : interrupt number. + +Optional Properties: + +- clock-frequency : bus frequency used to configure timing registers; + allowed values are 100000, 400000 and 1000000; + those are expressed in Hz. Default is 100000. + +Example: + +i2c@2804000 { + compatible = "mellanox,i2c-mlxbf1"; + reg = <0x02804000 0x800>, + <0x02801200 0x020>, + <0x02801260 0x020>; + interrupts = <57>; + clock-frequency = <100000>; +}; + +i2c@2808800 { + compatible = "mellanox,i2c-mlxbf2"; + reg = <0x02808800 0x600>, + <0x02808e00 0x020>, + <0x02808e20 0x020>, + <0x02808e40 0x010>; + interrupts = <57>; + clock-frequency = <400000>; +}; diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml index 15abc022968e..c76131902b77 100644 --- a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml +++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml @@ -37,6 +37,8 @@ required: - interrupts - clocks +unevaluatedProperties: false + examples: - | i2c0: i2c@58780000 { diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml index ef998def554e..ddde08636ab0 100644 --- a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml @@ -37,6 +37,8 @@ required: - interrupts - clocks +unevaluatedProperties: false + examples: - | i2c0: i2c@58400000 { diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index f2fcbb361180..d747f4990ad8 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -94,6 +94,8 @@ required: - resets - clocks +unevaluatedProperties: false + examples: - | #include <dt-bindings/mfd/stm32f7-rcc.h> diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml index 67c1c84ba3dc..ffb2ed039a5e 100644 --- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml +++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml @@ -36,6 +36,8 @@ required: - interrupts - clocks +unevaluatedProperties: false + examples: - | axi_iic_0: i2c@40800000 { diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml index 4147f02b5e3c..4fcbfd93e218 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml @@ -25,11 +25,15 @@ properties: interrupts: maxItems: 1 + spi-max-frequency: true + required: - compatible - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index fd4eaa3d0ab4..11d32a288535 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -32,6 +32,8 @@ properties: spi-cpol: true + spi-max-frequency: true + interrupts: maxItems: 1 @@ -40,6 +42,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml index e7daffec88d3..38b59b6454ce 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml @@ -25,11 +25,15 @@ properties: interrupts: maxItems: 1 + spi-max-frequency: true + required: - compatible - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml index d61ab4fa3d71..390b87242fcb 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml @@ -29,10 +29,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix. + spi-max-frequency: true + required: - compatible - reg +additionalProperties: false + examples: - | # include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/adc/ad7949.txt b/Documentation/devicetree/bindings/iio/adc/ad7949.txt deleted file mode 100644 index c7f5057356b1..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/ad7949.txt +++ /dev/null @@ -1,16 +0,0 @@ -* Analog Devices AD7949/AD7682/AD7689 - -Required properties: - - compatible: Should be one of - * "adi,ad7949" - * "adi,ad7682" - * "adi,ad7689" - - reg: spi chip select number for the device - - vref-supply: The regulator supply for ADC reference voltage - -Example: -adc@0 { - compatible = "adi,ad7949"; - reg = <0>; - vref-supply = <&vdd_supply>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index deb34deff0e8..f1c574c896cb 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -52,6 +52,8 @@ properties: avdd-supply: description: avdd supply can be used as reference for conversion. + spi-max-frequency: true + required: - compatible - reg @@ -108,6 +110,8 @@ patternProperties: - reg - diff-channels +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index d0913034b1d8..e0cc3b2e8957 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -30,6 +30,8 @@ properties: spi-cpha: true + spi-max-frequency: true + clocks: maxItems: 1 description: phandle to the master clock (mclk) @@ -92,6 +94,8 @@ required: - spi-cpol - spi-cpha +additionalProperties: false + examples: - | spi0 { diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml new file mode 100644 index 000000000000..6feafb7e531e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7291.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AD7291 8-Channel, I2C, 12-Bit SAR ADC with Temperature Sensor + +maintainers: + - Michael Auchter <michael.auchter@ni.com> + +description: | + Analog Devices AD7291 8-Channel I2C 12-Bit SAR ADC with Temperature Sensor + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf + +properties: + compatible: + enum: + - adi,ad7291 + + reg: + maxItems: 1 + + vref-supply: + description: | + The regulator supply for ADC reference voltage. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ad7291: adc@0 { + compatible = "adi,ad7291"; + reg = <0>; + vref-supply = <&adc_vref>; + }; + }; +...
\ No newline at end of file diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml index e1f6d64bdccd..108d202b288f 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml @@ -30,6 +30,8 @@ properties: spi-cpha: true + spi-max-frequency: true + '#address-cells': const: 1 @@ -63,6 +65,8 @@ patternProperties: required: - reg +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index cbb8819d7069..73775174cf57 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -31,6 +31,10 @@ properties: spi-cpha: true + spi-cpol: true + + spi-max-frequency: true + avcc-supply: true interrupts: @@ -102,6 +106,8 @@ required: - interrupts - adi,conversion-start-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt deleted file mode 100644 index 9f5b88cf680d..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt +++ /dev/null @@ -1,41 +0,0 @@ -Analog Devices AD7768-1 ADC device driver - -Required properties for the AD7768-1: - -- compatible: Must be "adi,ad7768-1" -- reg: SPI chip select number for the device -- spi-max-frequency: Max SPI frequency to use - see: Documentation/devicetree/bindings/spi/spi-bus.txt -- clocks: phandle to the master clock (mclk) - see: Documentation/devicetree/bindings/clock/clock-bindings.txt -- clock-names: Must be "mclk". -- interrupts: IRQ line for the ADC - see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- vref-supply: vref supply can be used as reference for conversion -- adi,sync-in-gpios: must be the device tree identifier of the SYNC-IN pin. Enables - synchronization of multiple devices that require simultaneous sampling. - A pulse is always required if the configuration is changed in any way, for example - if the filter decimation rate changes. As the line is active low, it should - be marked GPIO_ACTIVE_LOW. - -Optional properties: - - - reset-gpios : GPIO spec for the RESET pin. If specified, it will be asserted during - driver probe. As the line is active low, it should be marked GPIO_ACTIVE_LOW. - -Example: - - adc@0 { - compatible = "adi,ad7768-1"; - reg = <0>; - spi-max-frequency = <2000000>; - spi-cpol; - spi-cpha; - vref-supply = <&adc_vref>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpio>; - adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; - clocks = <&ad7768_mclk>; - clock-names = "mclk"; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml new file mode 100644 index 000000000000..d3733ad8785a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7768-1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7768-1 ADC device driver + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Datasheet at: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf + +properties: + compatible: + const: adi,ad7768-1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: mclk + + interrupts: + maxItems: 1 + + vref-supply: + description: + ADC reference voltage supply + + adi,sync-in-gpios: + description: + Enables synchronization of multiple devices that require simultaneous + sampling. A pulse is always required if the configuration is changed + in any way, for example if the filter decimation rate changes. + As the line is active low, it should be marked GPIO_ACTIVE_LOW. + + reset-gpios: + maxItems: 1 + + spi-max-frequency: true + + spi-cpol: true + spi-cpha : true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - vref-supply + - spi-cpol + - spi-cpha + - adi,sync-in-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7768-1"; + reg = <0>; + spi-max-frequency = <2000000>; + spi-cpol; + spi-cpha; + vref-supply = <&adc_vref>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + clocks = <&ad7768_mclk>; + clock-names = "mclk"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml index a11b918e0016..e82194974eea 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml @@ -43,10 +43,14 @@ properties: '#size-cells': const: 0 + spi-max-frequency: true + required: - compatible - reg +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml new file mode 100644 index 000000000000..9b56bd4d5510 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7949.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7949/AD7682/AD7689 analog to digital converters + +maintainers: + - Charles-Antoine Couret <charles-antoine.couret@essensium.com> + +description: | + Specifications on the converters can be found at: + AD7949: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7949.pdf + AD7682/AD7698: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7682_7689.pdf + +properties: + compatible: + enum: + - adi,ad7682 + - adi,ad7689 + - adi,ad7949 + + reg: + maxItems: 1 + + vref-supply: + description: + ADC reference voltage supply + + spi-max-frequency: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7949"; + reg = <0>; + vref-supply = <&vdd_supply>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml index c4f57fa6aad1..b5aed40d8a50 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml @@ -4,21 +4,30 @@ $id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices AD9467 High-Speed ADC +title: Analog Devices AD9467 and similar High-Speed ADCs maintainers: - Michael Hennerich <michael.hennerich@analog.com> - Alexandru Ardelean <alexandru.ardelean@analog.com> description: | - The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital - converter (ADC). + The AD9467 and the parts similar with it, are high-speed analog-to-digital + converters (ADCs), operating in the range of 100 to 500 mega samples + per second (MSPS). Some parts support higher MSPS and some + lower MSPS, suitable for the intended application of each part. + All the parts support the register map described by Application Note AN-877 + https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf + + https://www.analog.com/media/en/technical-documentation/data-sheets/AD9265.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD9434.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf properties: compatible: enum: + - adi,ad9265 + - adi,ad9434 - adi,ad9467 reg: diff --git a/Documentation/devicetree/bindings/iio/adc/ads1015.txt b/Documentation/devicetree/bindings/iio/adc/ads1015.txt deleted file mode 100644 index 918a507d1159..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/ads1015.txt +++ /dev/null @@ -1,73 +0,0 @@ -ADS1015 (I2C) - -This device is a 12-bit A-D converter with 4 inputs. - -The inputs can be used single ended or in certain differential combinations. - -For configuration all possible combinations are mapped to 8 channels: - 0: Voltage over AIN0 and AIN1. - 1: Voltage over AIN0 and AIN3. - 2: Voltage over AIN1 and AIN3. - 3: Voltage over AIN2 and AIN3. - 4: Voltage over AIN0 and GND. - 5: Voltage over AIN1 and GND. - 6: Voltage over AIN2 and GND. - 7: Voltage over AIN3 and GND. - -Each channel can be configured individually: - - pga is the programmable gain amplifier (values are full scale) - 0: +/- 6.144 V - 1: +/- 4.096 V - 2: +/- 2.048 V (default) - 3: +/- 1.024 V - 4: +/- 0.512 V - 5: +/- 0.256 V - - data_rate in samples per second - 0: 128 - 1: 250 - 2: 490 - 3: 920 - 4: 1600 (default) - 5: 2400 - 6: 3300 - -1) The /ads1015 node - - Required properties: - - - compatible : must be "ti,ads1015" - - reg : I2C bus address of the device - - #address-cells : must be <1> - - #size-cells : must be <0> - - The node contains child nodes for each channel that the platform uses. - - Example ADS1015 node: - - ads1015@49 { - compatible = "ti,ads1015"; - reg = <0x49>; - #address-cells = <1>; - #size-cells = <0>; - - [ child node definitions... ] - } - -2) channel nodes - - Required properties: - - - reg : the channel number - - Optional properties: - - - ti,gain : the programmable gain amplifier setting - - ti,datarate : the converter data rate - - Example ADS1015 channel node: - - channel@4 { - reg = <4>; - ti,gain = <3>; - ti,datarate = <5>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt deleted file mode 100644 index d57e9df25f4f..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt +++ /dev/null @@ -1,48 +0,0 @@ -* Amlogic Meson SAR (Successive Approximation Register) A/D converter - -Required properties: -- compatible: depending on the SoC this should be one of: - - "amlogic,meson8-saradc" for Meson8 - - "amlogic,meson8b-saradc" for Meson8b - - "amlogic,meson8m2-saradc" for Meson8m2 - - "amlogic,meson-gxbb-saradc" for GXBB - - "amlogic,meson-gxl-saradc" for GXL - - "amlogic,meson-gxm-saradc" for GXM - - "amlogic,meson-axg-saradc" for AXG - - "amlogic,meson-g12a-saradc" for AXG - along with the generic "amlogic,meson-saradc" -- reg: the physical base address and length of the registers -- interrupts: the interrupt indicating end of sampling -- clocks: phandle and clock identifier (see clock-names) -- clock-names: mandatory clocks: - - "clkin" for the reference clock (typically XTAL) - - "core" for the SAR ADC core clock - optional clocks: - - "adc_clk" for the ADC (sampling) clock - - "adc_sel" for the ADC (sampling) clock mux -- vref-supply: the regulator supply for the ADC reference voltage -- #io-channel-cells: must be 1, see ../iio-bindings.txt - -Optional properties: -- amlogic,hhi-sysctrl: phandle to the syscon which contains the 5th bit - of the TSC (temperature sensor coefficient) on - Meson8b and Meson8m2 (which used to calibrate the - temperature sensor) -- nvmem-cells: phandle to the temperature_calib eFuse cells -- nvmem-cell-names: if present (to enable the temperature sensor - calibration) this must contain "temperature_calib" - - -Example: - saradc: adc@8680 { - compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; - #io-channel-cells = <1>; - reg = <0x0 0x8680 0x0 0x34>; - interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, - <&clkc CLKID_SAR_ADC>, - <&clkc CLKID_SANA>, - <&clkc CLKID_SAR_ADC_CLK>, - <&clkc CLKID_SAR_ADC_SEL>; - clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml new file mode 100644 index 000000000000..3be8955587e4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/amlogic,meson-saradc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson SAR (Successive Approximation Register) A/D converter + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +description: + Binding covers a range of ADCs found on Amlogic Meson SoCs. + +properties: + compatible: + oneOf: + - const: amlogic,meson-saradc + - items: + - enum: + - amlogic,meson8-saradc + - amlogic,meson8b-saradc + - amlogic,meson8m2-saradc + - amlogic,meson-gxbb-saradc + - amlogic,meson-gxl-saradc + - amlogic,meson-gxm-saradc + - amlogic,meson-axg-saradc + - amlogic,meson-g12a-saradc + - const: amlogic,meson-saradc + + reg: + maxItems: 1 + + interrupts: + description: Interrupt indicates end of sampling. + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: clkin + - const: core + - const: adc_clk + - const: adc_sel + + vref-supply: true + + "#io-channel-cells": + const: 1 + + amlogic,hhi-sysctrl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Syscon which contains the 5th bit of the TSC (temperature sensor + coefficient) on Meson8b and Meson8m2 (which used to calibrate the + temperature sensor) + + nvmem-cells: + description: phandle to the temperature_calib eFuse cells + maxItems: 1 + + nvmem-cell-names: + const: temperature_calib + +allOf: + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8-saradc + - amlogic,meson8b-saradc + - amlogic,meson8m2-saradc + then: + properties: + clocks: + maxItems: 2 + clock-names: + maxItems: 2 + else: + properties: + nvmem-cells: false + mvmem-cel-names: false + clocks: + minItems: 4 + clock-names: + minItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8b-saradc + - amlogic,meson8m2-saradc + then: + properties: + amlogic,hhi-sysctrl: true + else: + properties: + amlogic,hhi-sysctrl: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/gxbb-clkc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + adc@8680 { + compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; + #io-channel-cells = <1>; + reg = <0x0 0x8680 0x0 0x34>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SAR_ADC_CLK>, + <&clkc CLKID_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + }; + adc@9680 { + compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; + #io-channel-cells = <1>; + reg = <0x0 0x9680 0x0 0x34>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_SAR_ADC>; + clock-names = "clkin", "core"; + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "temperature_calib"; + amlogic,hhi-sysctrl = <&hhi>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml new file mode 100644 index 000000000000..7f534a933e92 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2400-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC that forms part of an ASPEED server management processor. + +maintainers: + - Joel Stanley <joel@jms.id.au> + +description: + This device is a 10-bit converter for 16 voltage channels. All inputs are + single ended. + +properties: + compatible: + enum: + - aspeed,ast2400-adc + - aspeed,ast2500-adc + + reg: + maxItems: 1 + + clocks: + description: + Input clock used to derive the sample clock. Expected to be the + SoC's APB clock. + + resets: + maxItems: 1 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - resets + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + adc@1e6e9000 { + compatible = "aspeed,ast2400-adc"; + reg = <0x1e6e9000 0xb0>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt deleted file mode 100644 index 034fc2ba100e..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt +++ /dev/null @@ -1,22 +0,0 @@ -Aspeed ADC - -This device is a 10-bit converter for 16 voltage channels. All inputs are -single ended. - -Required properties: -- compatible: Should be "aspeed,ast2400-adc" or "aspeed,ast2500-adc" -- reg: memory window mapping address and length -- clocks: Input clock used to derive the sample clock. Expected to be the - SoC's APB clock. -- resets: Reset controller phandle -- #io-channel-cells: Must be set to <1> to indicate channels are selected - by index. - -Example: - adc@1e6e9000 { - compatible = "aspeed,ast2400-adc"; - reg = <0x1e6e9000 0xb0>; - clocks = <&syscon ASPEED_CLK_APB>; - resets = <&syscon ASPEED_RESET_ADC>; - #io-channel-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt deleted file mode 100644 index 908334c6b07f..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Berlin Analog to Digital Converter (ADC) - -The Berlin ADC has 8 channels, with one connected to a temperature sensor. -It is part of the system controller register set. The ADC node should be a -sub-node of the system controller node. - -Required properties: -- compatible: must be "marvell,berlin2-adc" -- interrupts: the interrupts for the ADC and the temperature sensor -- interrupt-names: should be "adc" and "tsen" - -Example: - -adc: adc { - compatible = "marvell,berlin2-adc"; - interrupt-parent = <&sic>; - interrupts = <12>, <14>; - interrupt-names = "adc", "tsen"; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt b/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt deleted file mode 100644 index 904f76de9055..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Cosmic Circuits - Analog to Digital Converter (CC-10001-ADC) - -Required properties: - - compatible: Should be "cosmic,10001-adc" - - reg: Should contain adc registers location and length. - - clock-names: Should contain "adc". - - clocks: Should contain a clock specifier for each entry in clock-names - - vref-supply: The regulator supply ADC reference voltage. - -Optional properties: - - adc-reserved-channels: Bitmask of reserved channels, - i.e. channels that cannot be used by the OS. - -Example: -adc: adc@18101600 { - compatible = "cosmic,10001-adc"; - reg = <0x18101600 0x24>; - adc-reserved-channels = <0x2>; - clocks = <&adc_clk>; - clock-names = "adc"; - vref-supply = <®_1v8>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml new file mode 100644 index 000000000000..5d92b477e23f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/cosmic,10001-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cosmic Circuits CC-10001 ADC + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: + Cosmic Circuits 10001 10-bit ADC device. + +properties: + compatible: + const: cosmic,10001-adc + + reg: + maxItems: 1 + + adc-reserved-channels: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Bitmask of reserved channels, i.e. channels that cannot be + used by the OS. + + clocks: + maxItems: 1 + + clock-names: + const: adc + + vref-supply: true + + "#io-channel-cells": + const: 1 + + +required: + - compatible + - reg + - clocks + - clock-names + - vref-supply + +additionalProperties: false + +examples: + - | + adc@18101600 { + compatible = "cosmic,10001-adc"; + reg = <0x18101600 0x24>; + adc-reserved-channels = <0x2>; + clocks = <&adc_clk>; + clock-names = "adc"; + vref-supply = <®_1v8>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt deleted file mode 100644 index ec04008e8f4f..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt +++ /dev/null @@ -1,17 +0,0 @@ -Motorola CPCAP PMIC ADC binding - -Required properties: -- compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc" -- interrupts: The interrupt number for the ADC device -- interrupt-names: Should be "adcdone" -- #io-channel-cells: Number of cells in an IIO specifier - -Example: - -cpcap_adc: adc { - compatible = "motorola,mapphone-cpcap-adc"; - interrupt-parent = <&cpcap>; - interrupts = <8 IRQ_TYPE_NONE>; - interrupt-names = "adcdone"; - #io-channel-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt deleted file mode 100644 index c07228da92ac..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt +++ /dev/null @@ -1,16 +0,0 @@ -Dialog Semiconductor DA9150 IIO GPADC bindings - -Required properties: -- compatible: "dlg,da9150-gpadc" for DA9150 IIO GPADC -- #io-channel-cells: Should be set to <1> - (See Documentation/devicetree/bindings/iio/iio-bindings.txt for further info) - -For further information on GPADC channels, see device datasheet. - - -Example: - - gpadc: da9150-gpadc { - compatible = "dlg,da9150-gpadc"; - #io-channel-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml new file mode 100644 index 000000000000..cc29a2f2111a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/dlg,da9150-gpadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA9150 IIO GPADC + +maintainers: + - Adam Thomson <Adam.Thomson.Opensource@diasemi.com> + +description: + This patch adds support for general purpose ADC within the + DA9150 Charger & Fuel-Gauge IC. + +properties: + compatible: + const: dlg,da9150-gpadc + + "#io-channel-cells": + const: 1 + +required: + - compatible + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + adc { + compatible = "dlg,da9150-gpadc"; + #io-channel-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt deleted file mode 100644 index eebdcec3dab5..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt +++ /dev/null @@ -1,57 +0,0 @@ -Freescale i.MX25 ADC GCQ device - -This is a generic conversion queue device that can convert any of the -analog inputs using the ADC unit of the i.MX25. - -Required properties: - - compatible: Should be "fsl,imx25-gcq". - - reg: Should be the register range of the module. - - interrupts: Should be the interrupt number of the module. - Typically this is <1>. - - #address-cells: Should be <1> (setting for the subnodes) - - #size-cells: Should be <0> (setting for the subnodes) - -Optional properties: - - vref-ext-supply: The regulator supplying the ADC reference voltage. - Required when at least one subnode uses the this reference. - - vref-xp-supply: The regulator supplying the ADC reference voltage on pin XP. - Required when at least one subnode uses this reference. - - vref-yp-supply: The regulator supplying the ADC reference voltage on pin YP. - Required when at least one subnode uses this reference. - -Sub-nodes: -Optionally you can define subnodes which define the reference voltage -for the analog inputs. - -Required properties for subnodes: - - reg: Should be the number of the analog input. - 0: xp - 1: yp - 2: xn - 3: yn - 4: wiper - 5: inaux0 - 6: inaux1 - 7: inaux2 -Optional properties for subnodes: - - fsl,adc-refp: specifies the positive reference input as defined in - <dt-bindings/iio/adc/fsl-imx25-gcq.h> - - fsl,adc-refn: specifies the negative reference input as defined in - <dt-bindings/iio/adc/fsl-imx25-gcq.h> - -Example: - - adc: adc@50030800 { - compatible = "fsl,imx25-gcq"; - reg = <0x50030800 0x60>; - interrupt-parent = <&tscadc>; - interrupts = <1>; - #address-cells = <1>; - #size-cells = <0>; - - inaux@5 { - reg = <5>; - fsl,adc-refp = <MX25_ADC_REFP_INT>; - fsl,adc-refn = <MX25_ADC_REFN_NGND>; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml new file mode 100644 index 000000000000..e9103497e3a4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/fsl,imx25-gcq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale ADC GCQ device + +description: + This is a generic conversion queue device that can convert any of the + analog inputs using the ADC unit of the i.MX25. + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +properties: + compatible: + const: fsl,imx25-gcq + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vref-ext-supply: + description: + The regulator supplying the ADC reference voltage. + Required when at least one subnode uses the this reference. + + vref-xp-supply: + description: + The regulator supplying the ADC reference voltage on pin XP. + Required when at least one subnode uses this reference. + + vref-yp-supply: + description: + The regulator supplying the ADC reference voltage on pin YP. + Required when at least one subnode uses this reference. + + "#io-channel-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + +patternProperties: + "[a-z][a-z0-9]+@[0-9a-f]+$": + type: object + description: + Child nodes used to define the reference voltages used for each channel + + properties: + reg: + description: | + Number of the analog input. + 0: xp + 1: yp + 2: xn + 3: yn + 4: wiper + 5: inaux0 + 6: inaux1 + 7: inaux2 + items: + - minimum: 0 + maximum: 7 + + fsl,adc-refp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the positive reference input as defined in + <dt-bindings/iio/adc/fsl-imx25-gcq.h> + 0: YP voltage reference + 1: XP voltage reference + 2: External voltage reference + 3: Internal voltage reference (default) + minimum: 0 + maximum: 3 + + fsl,adc-refn: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the negative reference input as defined in + <dt-bindings/iio/adc/fsl-imx25-gcq.h> + 0: XN ground reference + 1: YN ground reference + 2: Internal ground reference + 3: External ground reference (default) + minimum: 0 + maximum: 3 + + required: + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/iio/adc/fsl-imx25-gcq.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@50030800 { + compatible = "fsl,imx25-gcq"; + reg = <0x50030800 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; + + inaux@5 { + reg = <5>; + fsl,adc-refp = <MX25_ADC_REFP_INT>; + fsl,adc-refn = <MX25_ADC_REFN_NGND>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml new file mode 100644 index 000000000000..afc5cc48a0ce --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/fsl,imx7d-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale ADC found on the imx7d SoC + +maintainers: + - Haibo Chen <haibo.chen@nxp.com> + +properties: + compatible: + const: fsl,imx7d-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: adc + + vref-supply: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/imx7d-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@30610000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30610000 0x10000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + vref-supply = <®_vcc_3v3_mcu>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml new file mode 100644 index 000000000000..1ca571056ea9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/fsl,vf610-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC found on Freescale vf610 and similar SoCs + +maintainers: + - Fugang Duan <fugang.duan@nxp.com> + +description: + ADCs found on vf610/i.MX6slx and upward SoCs from Freescale. + +properties: + compatible: + const: fsl,vf610-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: ADC source clock (ipg clock) + maxItems: 1 + + clock-names: + const: adc + + vref-supply: + description: ADC reference voltage supply. + + fsl,adck-max-frequency: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + description: | + Maximum frequencies from datasheet operating requirements. + Three values necessary to cover the 3 conversion modes. + * Frequency in normal mode (ADLPC=0, ADHSC=0) + * Frequency in high-speed mode (ADLPC=0, ADHSC=1) + * Frequency in low-power mode (ADLPC=1, ADHSC=0) + + min-sample-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum sampling time in nanoseconds. This value has + to be chosen according to the conversion mode and the connected analog + source resistance (R_as) and capacitance (C_as). Refer the datasheet's + operating requirements. A safe default across a wide range of R_as and + C_as as well as conversion modes is 1000ns. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/vf610-clock.h> + adc@4003b000 { + compatible = "fsl,vf610-adc"; + reg = <0x4003b000 0x1000>; + interrupts = <0 53 0x04>; + clocks = <&clks VF610_CLK_ADC0>; + clock-names = "adc"; + fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; + vref-supply = <®_vcc_3v3_mcu>; + min-sample-time = <10000>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/hi8435.txt b/Documentation/devicetree/bindings/iio/adc/hi8435.txt deleted file mode 100644 index 3b0348c5e516..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/hi8435.txt +++ /dev/null @@ -1,21 +0,0 @@ -Holt Integrated Circuits HI-8435 threshold detector bindings - -Required properties: - - compatible: should be "holt,hi8435" - - reg: spi chip select number for the device - -Recommended properties: - - spi-max-frequency: definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Optional properties: - - gpios: GPIO used for controlling the reset pin - -Example: -sensor@0 { - compatible = "holt,hi8435"; - reg = <0>; - gpios = <&gpio6 1 0>; - - spi-max-frequency = <1000000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml new file mode 100644 index 000000000000..9514c3381c42 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/holt,hi8435.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Holt Integrated Circuits HI-8435 SPI threshold detector + +maintainers: + - Vladimir Barinov <vladimir.barinov@cogentembedded.com> + +description: | + Datasheet: http://www.holtic.com/documents/427-hi-8435_v-rev-lpdf.do + +properties: + compatible: + const: holt,hi8435 + + reg: + maxItems: 1 + + gpios: + description: + GPIO used for controlling the reset pin + maxItems: 1 + + spi-max-frequency: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + threshold-detector@0 { + compatible = "holt,hi8435"; + reg = <0>; + gpios = <&gpio6 1 0>; + spi-max-frequency = <1000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt deleted file mode 100644 index f1f3a552459b..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt +++ /dev/null @@ -1,24 +0,0 @@ -Freescale imx7d ADC bindings - -The devicetree bindings are for the ADC driver written for -imx7d SoC. - -Required properties: -- compatible: Should be "fsl,imx7d-adc" -- reg: Offset and length of the register set for the ADC device -- interrupts: The interrupt number for the ADC device -- clocks: The root clock of the ADC controller -- clock-names: Must contain "adc", matching entry in the clocks property -- vref-supply: The regulator supply ADC reference voltage -- #io-channel-cells: Must be 1 as per ../iio-bindings.txt - -Example: -adc1: adc@30610000 { - compatible = "fsl,imx7d-adc"; - reg = <0x30610000 0x10000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ADC_ROOT_CLK>; - clock-names = "adc"; - vref-supply = <®_vcc_3v3_mcu>; - #io-channel-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml new file mode 100644 index 000000000000..6a176f551d75 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Linear Technology / Analog Devices LTC2497 ADC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + 16bit ADC supporting up to 16 single ended or 8 differential inputs. + I2C interface. + +properties: + compatible: + const: + lltc,ltc2497 + + reg: true + vref-supply: true + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@76 { + compatible = "lltc,ltc2497"; + reg = <0x76>; + vref-supply = <<c2497_reg>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt deleted file mode 100644 index 9ada5abd45fa..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt +++ /dev/null @@ -1,20 +0,0 @@ -NXP LPC1850 ADC bindings - -Required properties: -- compatible: Should be "nxp,lpc1850-adc" -- reg: Offset and length of the register set for the ADC device -- interrupts: The interrupt number for the ADC device -- clocks: The root clock of the ADC controller -- vref-supply: The regulator supply ADC reference voltage -- resets: phandle to reset controller and line specifier - -Example: - -adc0: adc@400e3000 { - compatible = "nxp,lpc1850-adc"; - reg = <0x400e3000 0x1000>; - interrupts = <17>; - clocks = <&ccu1 CLK_APB3_ADC0>; - vref-supply = <®_vdda>; - resets = <&rgu 40>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt deleted file mode 100644 index 3a1bc669bd51..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt +++ /dev/null @@ -1,21 +0,0 @@ -* NXP LPC32xx SoC ADC controller - -Required properties: -- compatible: must be "nxp,lpc3220-adc" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The ADC interrupt - -Optional: - - vref-supply: The regulator supply ADC reference voltage, optional - for legacy reason, but highly encouraging to us in new device tree - -Example: - - adc@40048000 { - compatible = "nxp,lpc3220-adc"; - reg = <0x40048000 0x1000>; - interrupt-parent = <&mic>; - interrupts = <39 0>; - vref-supply = <&vcc>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/ltc2497.txt b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt deleted file mode 100644 index a237ed99c0d8..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/ltc2497.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Linear Technology / Analog Devices LTC2497 ADC - -Required properties: - - compatible: Must be "lltc,ltc2497" - - reg: Must contain the ADC I2C address - - vref-supply: The regulator supply for ADC reference voltage - -Example: - ltc2497: adc@76 { - compatible = "lltc,ltc2497"; - reg = <0x76>; - vref-supply = <<c2497_reg>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml new file mode 100644 index 000000000000..b3b292fb1c59 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/marvell,berlin2-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Berlin 2 Analog to Digital Converter (ADC) + +maintainers: + - Antoine Tenart <antoine.tenart@free-electrons.com> + +description: + The Berlin ADC has 8 channels, with one connected to a temperature sensor. + It is part of the system controller register set. The ADC node should be a + sub-node of the system controller node. + +properties: + compatible: + const: marvell,berlin2-adc + + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + items: + - const: adc + - const: tsen + + "#io-channel-cells": + const: 1 + +required: + - compatible + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + sysctrl { + adc { + compatible = "marvell,berlin2-adc"; + interrupt-parent = <&sic>; + interrupts = <12>, <14>; + interrupt-names = "adc", "tsen"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/max11100.txt b/Documentation/devicetree/bindings/iio/adc/max11100.txt deleted file mode 100644 index b7f7177b8aca..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/max11100.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Maxim max11100 Analog to Digital Converter (ADC) - -Required properties: - - compatible: Should be "maxim,max11100" - - reg: the adc unit address - - vref-supply: phandle to the regulator that provides reference voltage - -Optional properties: - - spi-max-frequency: SPI maximum frequency - -Example: - -max11100: adc@0 { - compatible = "maxim,max11100"; - reg = <0>; - vref-supply = <&adc0_vref>; - spi-max-frequency = <240000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/max1118.txt b/Documentation/devicetree/bindings/iio/adc/max1118.txt deleted file mode 100644 index cf33d0b15a6d..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/max1118.txt +++ /dev/null @@ -1,21 +0,0 @@ -* MAX1117/MAX1118/MAX1119 8-bit, dual-channel ADCs - -Required properties: - - compatible: Should be one of - * "maxim,max1117" - * "maxim,max1118" - * "maxim,max1119" - - reg: spi chip select number for the device - - (max1118 only) vref-supply: The regulator supply for ADC reference voltage - -Recommended properties: - - spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: -adc@0 { - compatible = "maxim,max1118"; - reg = <0>; - vref-supply = <&vdd_supply>; - spi-max-frequency = <1000000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/max9611.txt b/Documentation/devicetree/bindings/iio/adc/max9611.txt deleted file mode 100644 index ab4f43145ae5..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/max9611.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface - -Maxim max9611/max9612 is an high-side current sense amplifier with integrated -12-bits ADC communicating over I2c bus. -The device node for this driver shall be a child of a I2c controller. - -Required properties - - compatible: Should be "maxim,max9611" or "maxim,max9612" - - reg: The 7-bits long I2c address of the device - - shunt-resistor-micro-ohms: Value, in micro Ohms, of the current sense shunt - resistor - -Example: - -&i2c4 { - csa: adc@7c { - compatible = "maxim,max9611"; - reg = <0x7c>; - - shunt-resistor-micro-ohms = <5000>; - }; -}; - -This device node describes a current sense amplifier sitting on I2c4 bus -with address 0x7c (read address is 0xf9, write address is 0xf8). -A sense resistor of 0,005 Ohm is installed between RS+ and RS- current-sensing -inputs. diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml new file mode 100644 index 000000000000..0cf87556ef82 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max11100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX11100 ADC + +maintainers: + - Jacopo Mondi <jacopo@jmondi.org> + +description: | + Single channel 16 bit ADC with SPI interface. + +properties: + compatible: + const: maxim,max11100 + + reg: + maxItems: 1 + + vref-supply: + description: External reference, needed to establish input scaling. + + spi-max-frequency: + minimum: 100000 + maximum: 4800000 + +additionalProperties: false + +required: + - compatible + - reg + - vref-supply + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "maxim,max11100"; + reg = <0>; + vref-supply = <&adc_vref>; + spi-max-frequency = <240000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml new file mode 100644 index 000000000000..e948b3e37b0c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max1118.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX1118 and similar ADCs + +maintainers: + - Akinobu Mita <akinobu.mita@gmail.com> + +description: | + Dual channel 8bit ADCs. + +properties: + compatible: + enum: + - maxim,max1117 + - maxim,max1118 + - maxim,max1119 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + vref-supply: + description: External reference, needed to establish input scaling + +if: + properties: + compatible: + contains: + const: maxim,max1118 +then: + required: + - vref-supply +else: + properties: + vref-supply: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "maxim,max1118"; + reg = <0>; + vref-supply = <&adc_vref>; + spi-max-frequency = <1000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml index cccd3033a55b..50bcd72ac9d6 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml @@ -62,6 +62,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml index f562505f5ecd..4c7e0d94bff1 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml @@ -39,12 +39,16 @@ properties: thus enabling power-down mode. maxItems: 1 + spi-max-frequency: true + required: - compatible - reg - vdd-supply - vref-supply +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml index 48377549c39a..e04f09f35601 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml @@ -36,6 +36,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml new file mode 100644 index 000000000000..9475a9e6e920 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max9611.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX9611 and similar current sense amplifiers with integrated ADCs + +maintainers: + - Jacopo Mondi <jacopo@jmondi.org> + +description: | + These devices combine a high-side current sense amplifier with a 12 bit ADC. + They have an i2c interface. + +properties: + compatible: + enum: + - maxim,max9611 + - maxim,max9612 + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Value in micro Ohms of the shunt resistor connected between the RS+ and + RS- inputs, across which the current is measured. Value needed to compute + the scaling of the measured current. + +additionalProperties: false + +required: + - compatible + - reg + - shunt-resistor-micro-ohms + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@7c { + compatible = "maxim,max9611"; + reg = <0x7c>; + shunt-resistor-micro-ohms = <5000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt deleted file mode 100644 index 56373d643f76..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt +++ /dev/null @@ -1,57 +0,0 @@ -* Microchip Analog to Digital Converter (ADC) - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in - - Documentation/devicetree/bindings/spi/spi-bus.txt - -must be specified. - -Required properties: - - compatible: Must be one of the following, depending on the - model: - "mcp3001" (DEPRECATED) - "mcp3002" (DEPRECATED) - "mcp3004" (DEPRECATED) - "mcp3008" (DEPRECATED) - "mcp3201" (DEPRECATED) - "mcp3202" (DEPRECATED) - "mcp3204" (DEPRECATED) - "mcp3208" (DEPRECATED) - "mcp3301" (DEPRECATED) - - "microchip,mcp3001" - "microchip,mcp3002" - "microchip,mcp3004" - "microchip,mcp3008" - "microchip,mcp3201" - "microchip,mcp3202" - "microchip,mcp3204" - "microchip,mcp3208" - "microchip,mcp3301" - "microchip,mcp3550-50" - "microchip,mcp3550-60" - "microchip,mcp3551" - "microchip,mcp3553" - - NOTE: The use of the compatibles with no vendor prefix - is deprecated and only listed because old DT use them. - - - spi-cpha, spi-cpol (boolean): - Either SPI mode (0,0) or (1,1) must be used, so specify - none or both of spi-cpha, spi-cpol. The MCP3550/1/3 - is more efficient in mode (1,1) as only 3 instead of - 4 bytes need to be read from the ADC, but not all SPI - masters support it. - - - vref-supply: Phandle to the external reference voltage supply. - -Examples: -spi_controller { - mcp3x0x@0 { - compatible = "microchip,mcp3002"; - reg = <0>; - spi-max-frequency = <1000000>; - vref-supply = <&vref_reg>; - }; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt deleted file mode 100644 index 82bcce07255d..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Microchip mcp3421/2/3/4/6/7/8 chip family (ADC) - -Required properties: - - compatible: Should be - "microchip,mcp3421" or - "microchip,mcp3422" or - "microchip,mcp3423" or - "microchip,mcp3424" or - "microchip,mcp3425" or - "microchip,mcp3426" or - "microchip,mcp3427" or - "microchip,mcp3428" - - reg: I2C address for the device - -Example: -adc@0 { - compatible = "microchip,mcp3424"; - reg = <0x68>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml new file mode 100644 index 000000000000..cbbac4ce56d6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3201.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip mcp3201 and similar ADCs + +maintainers: + - Oskar Andero <oskar.andero@gmail.com> + +description: | + Family of simple ADCs with an I2C inteface. + +properties: + compatible: + enum: + - microchip,mcp3001 + - microchip,mcp3002 + - microchip,mcp3004 + - microchip,mcp3008 + - microchip,mcp3201 + - microchip,mcp3202 + - microchip,mcp3204 + - microchip,mcp3208 + - microchip,mcp3301 + - microchip,mcp3550-50 + - microchip,mcp3550-60 + - microchip,mcp3551 + - microchip,mcp3553 + + reg: + maxItems: 1 + + spi-max-frequency: true + spi-cpha: true + spi-cpol: true + + vref-supply: + description: External reference. + + "#io-channel-cells": + const: 1 + +dependencies: + spi-cpol: [ spi-cpha ] + spi-cpha: [ spi-cpol ] + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "microchip,mcp3002"; + reg = <0>; + vref-supply = <&vref_reg>; + spi-cpha; + spi-cpol; + #io-channel-cells = <1>; + }; + adc@1 { + compatible = "microchip,mcp3002"; + reg = <1>; + vref-supply = <&vref_reg>; + spi-max-frequency = <1500000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml new file mode 100644 index 000000000000..a6cb857a232d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/motorola,cpcap-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Motorola CPCAP PMIC ADC binding + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: + On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC + has ADCs that are used for battery charging and USB PHY VBUS and ID pin + detection. + +properties: + compatible: + enum: + - motorola,cpcap-adc + - motorola,mapphone-cpcap-adc + + interrupts: + maxItems: 1 + + interrupt-names: + const: adcdone + + "#io-channel-cells": + const: 1 + +required: + - compatible + - interrupts + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + adc { + compatible = "motorola,mapphone-cpcap-adc"; + interrupt-parent = <&cpcap>; + interrupts = <8 IRQ_TYPE_NONE>; + interrupt-names = "adcdone"; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml new file mode 100644 index 000000000000..04566ff02eb6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nuvoton,nau7802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NAU7802 I2c Analog to Digital Converter (ADC) + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + const: nuvoton,nau7802 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nuvoton,vldo: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Internal reference voltage in millivolts to be configured. + minimum: 2400 + maximum: 4500 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + nau7802@2a { + compatible = "nuvoton,nau7802"; + reg = <0x2a>; + nuvoton,vldo = <3000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt deleted file mode 100644 index ef8eeec1a997..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt +++ /dev/null @@ -1,26 +0,0 @@ -Nuvoton NPCM Analog to Digital Converter (ADC) - -The NPCM ADC is a 10-bit converter for eight channel inputs. - -Required properties: -- compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC. -- reg: specifies physical base address and size of the registers. -- interrupts: Contain the ADC interrupt with flags for falling edge. -- resets : phandle to the reset control for this device. - -Optional properties: -- clocks: phandle of ADC reference clock, in case the clock is not - added the ADC will use the default ADC sample rate. -- vref-supply: The regulator supply ADC reference voltage, in case the - vref-supply is not added the ADC will use internal voltage - reference. - -Example: - -adc: adc@f000c000 { - compatible = "nuvoton,npcm750-adc"; - reg = <0xf000c000 0x8>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk NPCM7XX_CLK_ADC>; - resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml new file mode 100644 index 000000000000..001cf263b7d5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nuvoton,npcm750-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM BMC Analog to Digital Converter (ADC) + +maintainers: + - Tomer Maimon <tmaimon77@gmail.com> + +description: + The NPCM ADC is a 10-bit converter for eight channel inputs. + +properties: + compatible: + const: nuvoton,npcm750-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: ADC interrupt, should be set for falling edge. + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + description: If not provided the defulat ADC sample rate will be used. + + vref-supply: + description: If not supplied, the internal voltage reference will be used. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> + #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@f000c000 { + compatible = "nuvoton,npcm750-adc"; + reg = <0xf000c000 0x8>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_ADC>; + resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt deleted file mode 100644 index e9582e6fe350..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Nuvoton NAU7802 Analog to Digital Converter (ADC) - -Required properties: - - compatible: Should be "nuvoton,nau7802" - - reg: Should contain the ADC I2C address - -Optional properties: - - nuvoton,vldo: Internal reference voltage in millivolts to be - configured valid values are between 2400 mV and 4500 mV. - - interrupts: IRQ line for the ADC. If not used the driver will use - polling. - -Example: -adc2: nau7802@2a { - compatible = "nuvoton,nau7802"; - reg = <0x2a>; - nuvoton,vldo = <3000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml new file mode 100644 index 000000000000..6404fb73f8ed --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nxp,lpc1850-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC1850 ADC bindings + +maintainers: + - Joachim Eastwood <manabian@gmail.com> + +description: + Supports the ADC found on the LPC1850 SoC. + +properties: + compatible: + const: nxp,lpc1850-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + vref-supply: true + + resets: + maxItems: 1 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - vref-supply + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc18xx-ccu.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@400e3000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e3000 0x1000>; + interrupts = <17>; + clocks = <&ccu1 CLK_APB3_ADC0>; + vref-supply = <®_vdda>; + resets = <&rgu 40>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml new file mode 100644 index 000000000000..2c5032be83bd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nxp,lpc3220-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC3220 SoC ADC controller + +maintainers: + - Gregory Clement <gregory.clement@bootlin.com> + +description: + This hardware block has been used on several LPC32XX SoCs. + +properties: + compatible: + const: nxp,lpc3220-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vref-supply: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 0>; + vref-supply = <&vcc>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 0ca992465a21..7f4f827c57a7 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -48,6 +48,8 @@ properties: description: End of conversion interrupt. + io-channel-ranges: true + required: - compatible - reg @@ -232,6 +234,8 @@ allOf: enum: [ 1, 2, 4, 8, 16 ] default: 1 +additionalProperties: false + examples: - | spmi_bus { diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index cc3c8ea6a894..5ebb0ab250bd 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -41,11 +41,16 @@ properties: maxItems: 2 interrupts: - maxItems: 1 + description: + ADC interrupt followed by optional touchscreen interrupt. + minItems: 1 + maxItems: 2 "#io-channel-cells": const: 1 + io-channel-ranges: true + vdd-supply: true samsung,syscon-phandle: @@ -68,6 +73,9 @@ required: - "#io-channel-cells" - vdd-supply +additionalProperties: + type: object + allOf: - if: properties: @@ -78,7 +86,6 @@ allOf: - samsung,exynos-adc-v2 - samsung,exynos3250-adc - samsung,exynos4212-adc - - samsung,s5pv210-adc then: required: - samsung,syscon-phandle @@ -107,6 +114,15 @@ allOf: items: - const: adc + - if: + required: + - has-touchscreen + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + examples: - | adc: adc@12d10000 { diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml new file mode 100644 index 000000000000..caa3ee0b4b8c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/sprd,sc2720-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC27XX series PMICs ADC binding + +maintainers: + - Baolin Wang <baolin.wang7@gmail.com> + +description: + Supports the ADC found on these PMICs. + +properties: + compatible: + enum: + - sprd,sc2720-adc + - sprd,sc2721-adc + - sprd,sc2723-adc + - sprd,sc2730-adc + - sprd,sc2731-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + hwlocks: + maxItems: 1 + + nvmem-cells: + maxItems: 2 + + nvmem-cell-names: + items: + - const: big_scale_calib + - const: small_scale_calib + +required: + - compatible + - reg + - interrupts + - "#io-channel-cells" + - hwlocks + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + adc@480 { + compatible = "sprd,sc2731-adc"; + reg = <0x480>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + hwlocks = <&hwlock 4>; + nvmem-cells = <&adc_big_scale>, <&adc_small_scale>; + nvmem-cell-names = "big_scale_calib", "small_scale_calib"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt b/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt deleted file mode 100644 index b4daa15dcf15..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt +++ /dev/null @@ -1,40 +0,0 @@ -Spreadtrum SC27XX series PMICs ADC binding - -Required properties: -- compatible: Should be one of the following. - "sprd,sc2720-adc" - "sprd,sc2721-adc" - "sprd,sc2723-adc" - "sprd,sc2730-adc" - "sprd,sc2731-adc" -- reg: The address offset of ADC controller. -- interrupt-parent: The interrupt controller. -- interrupts: The interrupt number for the ADC device. -- #io-channel-cells: Number of cells in an IIO specifier. -- hwlocks: Reference to a phandle of a hwlock provider node. -- nvmem-cells: A phandle to the calibration cells provided by eFuse device. -- nvmem-cell-names: Should be "big_scale_calib", "small_scale_calib". - -Example: - - sc2731_pmic: pmic@0 { - compatible = "sprd,sc2731"; - reg = <0>; - spi-max-frequency = <26000000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - #address-cells = <1>; - #size-cells = <0>; - - pmic_adc: adc@480 { - compatible = "sprd,sc2731-adc"; - reg = <0x480>; - interrupt-parent = <&sc2731_pmic>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - #io-channel-cells = <1>; - hwlocks = <&hwlock 4>; - nvmem-cells = <&adc_big_scale>, <&adc_small_scale>; - nvmem-cell-names = "big_scale_calib", "small_scale_calib"; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml new file mode 100644 index 000000000000..9049c699152f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/st,stmpe-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC on an STMPE multifunction device. + +maintainers: + - Stefan Agner <stefan@agner.ch> + +description: + This ADC forms part of an ST microelectronics STMPE multifunction device . + The ADC is shared with the STMPE touchscreen. As a result some ADC related + settings are specified in the parent node. + The node name myst be stmpe_adc and should be a child node of the stmpe node + to which it belongs. + +properties: + compatible: + const: st,stmpe-adc + + st,norequest-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Bitmask specifying which ADC channels should _not_ be + requestable due to different usage (e.g. touch). + + "#io-channel-cells": + const: 1 + +required: + - compatible + +additionalProperties: false + +examples: + - | + stmpe { + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt deleted file mode 100644 index 480e66422625..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt +++ /dev/null @@ -1,21 +0,0 @@ -STMPE ADC driver ----------------- - -Required properties: - - compatible: "st,stmpe-adc" - -Optional properties: -Note that the ADC is shared with the STMPE touchscreen. ADC related settings -have to be done in the mfd. -- st,norequest-mask: bitmask specifying which ADC channels should _not_ be - requestable due to different usage (e.g. touch) - -Node name must be stmpe_adc and should be child node of stmpe node to -which it belongs. - -Example: - - stmpe_adc { - compatible = "st,stmpe-adc"; - st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ - }; diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml new file mode 100644 index 000000000000..f5a923cc847f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,adc0832.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADC0832 and similar ADCs + +maintainers: + - Akinobu Mita <akinobu.mita@gmail.com> + +description: | + 8 bit ADCs with 1, 2, 4 or 8 inputs for single ended or differential + conversion. + +properties: + compatible: + enum: + - ti,adc0831 + - ti,adc0832 + - ti,adc0834 + - ti,adc0838 + + reg: + maxItems: 1 + + spi-max-frequency: true + + vref-supply: + description: External reference, needed to establish input scaling + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,adc0832"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <200000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml new file mode 100644 index 000000000000..54955f03df93 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,adc108s102.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADC108S102 and ADC128S102 + +maintainers: + - Bogdan Pricop <bogdan.pricop@emutex.com> + +description: | + Family of 8 channel, 10/12 bit, SPI, single ended ADCs. + +properties: + compatible: + const: + ti,adc108s102 + + reg: true + vref-supply: true + spi-max-frequency: true + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells= <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,adc108s102"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml new file mode 100644 index 000000000000..ec3b2edf1fb7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,adc12138.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADC12138 and similar self-calibrating ADCs + +maintainers: + - Akinobu Mita <akinobu.mita@gmail.com> + +description: | + 13 bit ADCs with 1, 2 or 8 inputs and self calibrating circuitry to + correct for linearity, zero and full scale errors. + +properties: + compatible: + enum: + - ti,adc12130 + - ti,adc12132 + - ti,adc12138 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: End of Conversion (EOC) interrupt + + clocks: + maxItems: 1 + description: Conversion clock input. + + spi-max-frequency: true + + vref-p-supply: + description: The regulator supply for positive analog voltage reference + + vref-n-supply: + description: | + The regulator supply for negative analog voltage reference + (Note that this must not go below GND or exceed vref-p) + If not specified, this is assumed to be analog ground. + + ti,acquisition-time: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 6, 10, 18, 34 ] + description: | + The number of conversion clock periods for the S/H's acquisition time. + For high source impedances, this value can be increased to 18 or 34. + For less ADC accuracy and/or slower CCLK frequencies this value may be + decreased to 6. See section 6.0 INPUT SOURCE RESISTANCE in the + datasheet for details. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - vref-p-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,adc12138"; + reg = <0>; + interrupts = <28 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio1>; + clocks = <&cclk>; + vref-p-supply = <&ldo4_reg>; + spi-max-frequency = <5000000>; + ti,acquisition-time = <6>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml new file mode 100644 index 000000000000..d54a0183f024 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,adc128s052.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADC128S052 and similar ADCs + +maintainers: + - Angelo Compagnucci <angelo.compagnucci@gmail.com> + +description: | + Family of 12 bit SPI ADCs with 2 to 8 channels with a range of different + target sample rates. + +properties: + compatible: + enum: + - ti,adc122s021 + - ti,adc122s051 + - ti,adc122s101 + - ti,adc124s021 + - ti,adc124s051 + - ti,adc124s101 + - ti,adc128s052 + + reg: + maxItems: 1 + + spi-max-frequency: true + + vref-supply: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,adc128s052"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml new file mode 100644 index 000000000000..3f4f334d6f73 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,adc161s626.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADC141S626 and ADC161S626 ADCs + +maintainers: + - Matt Ranostay <matt.ranostay@konsulko.com> + +description: | + Single channel 14/16bit differential ADCs + +properties: + compatible: + enum: + - ti,adc141s626 + - ti,adc161s626 + + reg: + maxItems: 1 + + spi-max-frequency: true + + vdda-supply: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,adc161s626"; + vdda-supply = <&vdda_fixed>; + reg = <0>; + spi-max-frequency = <4300000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml new file mode 100644 index 000000000000..2c2d01bbc296 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1015.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI ADS1015 4 channel I2C analog to digital converter + +maintainers: + - Daniel Baluta <daniel.baluta@nxp.com> + +description: | + Datasheet at: https://www.ti.com/lit/gpn/ads1015 + Supports both single ended and differential channels. + +properties: + compatible: + const: ti,ads1015 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +patternProperties: + "^channel@[0-7]+$": + type: object + description: + Child nodes needed for each channel that the platform uses. + + properties: + reg: + description: | + 0: Voltage over AIN0 and AIN1. + 1: Voltage over AIN0 and AIN3. + 2: Voltage over AIN1 and AIN3. + 3: Voltage over AIN2 and AIN3. + 4: Voltage over AIN0 and GND. + 5: Voltage over AIN1 and GND. + 6: Voltage over AIN2 and GND. + 7: Voltage over AIN3 and GND. + items: + - minimum: 0 + maximum: 7 + + ti,gain: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: | + pga is the programmable gain amplifier (values are full scale) + 0: +/- 6.144 V + 1: +/- 4.096 V + 2: +/- 2.048 V (default) + 3: +/- 1.024 V + 4: +/- 0.512 V + 5: +/- 0.256 V + + ti,datarate: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 6 + description: | + Data acquisition rate in samples per second + 0: 128 + 1: 250 + 2: 490 + 3: 920 + 4: 1600 (default) + 5: 2400 + 6: 3300 + + required: + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + }; + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <5>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml new file mode 100644 index 000000000000..5ab5027be97e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads7950.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADS7950 and similar ADCs + +maintainers: + - David Lechner <david@lechnology.com> + +description: | + Family of 4-16 channel, 8-12 bit ADCs with SPI interface. + +properties: + compatible: + enum: + - ti,ads7950 + - ti,ads7951 + - ti,ads7952 + - ti,ads7953 + - ti,ads7954 + - ti,ads7955 + - ti,ads7956 + - ti,ads7957 + - ti,ads7958 + - ti,ads7959 + - ti,ads7960 + - ti,ads7961 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 20000000 + + vref-supply: + description: Supplies the 2.5V or 5V reference voltage + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,ads7957"; + reg = <0>; + vref-supply = <&refin_supply>; + spi-max-frequency = <10000000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml new file mode 100644 index 000000000000..b8c398187d5c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads8344.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADS8344 ADC + +maintainers: + - Gregory Clement <gregory.clement@bootlin.com> + +description: | + 16bit 8-channel ADC with single ended inputs. + +properties: + compatible: + const: ti,ads8344 + + reg: + maxItems: 1 + + spi-max-frequency: true + + vref-supply: + description: Supply the 2.5V or 5V reference voltage + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,ads8344"; + reg = <0>; + vref-supply = <&refin_supply>; + spi-max-frequency = <10000000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml index 97fe6cbb2efa..a0af4b24877f 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml @@ -25,10 +25,14 @@ properties: description: Optional external reference. If not supplied, assume REFSEL input tied low to enable the internal reference. + spi-max-frequency: true + required: - compatible - reg +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml new file mode 100644 index 000000000000..6c2539b3d707 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,tlc4541.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLC4541 and similar ADCs + +maintainers: + - Phil Reid <preid@electromag.com.au> + +description: | + 14/16bit single channel ADC with SPI interface. + +properties: + compatible: + enum: + - ti,tlc3541 + - ti,tlc4541 + + reg: + maxItems: 1 + + spi-max-frequency: true + + vref-supply: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,tlc4541"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <200000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml new file mode 100644 index 000000000000..6781ad2f0f51 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,twl4030-madc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MADC subsystem in the TWL4030 power module + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: + The MADC subsystem in the TWL4030 consists of a 10-bit ADC + combined with a 16-input analog multiplexer. + +properties: + compatible: + const: ti,twl4030-madc + + interrupts: + maxItems: 1 + + ti,system-uses-second-madc-irq: + type: boolean + description: + Set if the second madc irq register should be used, which is intended + to be used by Co-Processors (e.g. a modem). + + "#io-channel-cells": + const: 1 + +required: + - compatible + - interrupts + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + twl { + madc { + compatible = "ti,twl4030-madc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt deleted file mode 100644 index d91130587d01..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Texas Instruments' ADC0831/ADC0832/ADC0832/ADC0838 - -Required properties: - - compatible: Should be one of - * "ti,adc0831" - * "ti,adc0832" - * "ti,adc0834" - * "ti,adc0838" - - reg: spi chip select number for the device - - vref-supply: The regulator supply for ADC reference voltage - - spi-max-frequency: Max SPI frequency to use (< 400000) - -Example: -adc@0 { - compatible = "ti,adc0832"; - reg = <0>; - vref-supply = <&vdd_supply>; - spi-max-frequency = <200000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt deleted file mode 100644 index bbbbb4a9f58f..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Texas Instruments' ADC108S102 and ADC128S102 ADC chip - -Required properties: - - compatible: Should be "ti,adc108s102" - - reg: spi chip select number for the device - - vref-supply: The regulator supply for ADC reference voltage - -Recommended properties: - - spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: -adc@0 { - compatible = "ti,adc108s102"; - reg = <0>; - vref-supply = <&vdd_supply>; - spi-max-frequency = <1000000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt deleted file mode 100644 index 049a1d36f013..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Texas Instruments' ADC12130/ADC12132/ADC12138 - -Required properties: - - compatible: Should be one of - * "ti,adc12130" - * "ti,adc12132" - * "ti,adc12138" - - reg: SPI chip select number for the device - - interrupts: Should contain interrupt for EOC (end of conversion) - - clocks: phandle to conversion clock input - - spi-max-frequency: Definision as per - Documentation/devicetree/bindings/spi/spi-bus.txt - - vref-p-supply: The regulator supply for positive analog voltage reference - -Optional properties: - - vref-n-supply: The regulator supply for negative analog voltage reference - (Note that this must not go below GND or exceed vref-p) - If not specified, this is assumed to be analog ground. - - ti,acquisition-time: The number of conversion clock periods for the S/H's - acquisition time. Should be one of 6, 10, 18, 34. If not specified, - default value of 10 is used. - For high source impedances, this value can be increased to 18 or 34. - For less ADC accuracy and/or slower CCLK frequencies this value may be - decreased to 6. See section 6.0 INPUT SOURCE RESISTANCE in the - datasheet for details. - -Example: -adc@0 { - compatible = "ti,adc12138"; - reg = <0>; - interrupts = <28 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpio1>; - clocks = <&cclk>; - vref-p-supply = <&ldo4_reg>; - spi-max-frequency = <5000000>; - ti,acquisition-time = <6>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt deleted file mode 100644 index c07ce1a3f5c4..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip - -Required properties: - - compatible: Should be one of: - - "ti,adc128s052" - - "ti,adc122s021" - - "ti,adc122s051" - - "ti,adc122s101" - - "ti,adc124s021" - - "ti,adc124s051" - - "ti,adc124s101" - - reg: spi chip select number for the device - - vref-supply: The regulator supply for ADC reference voltage - -Recommended properties: - - spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: -adc@0 { - compatible = "ti,adc128s052"; - reg = <0>; - vref-supply = <&vdd_supply>; - spi-max-frequency = <1000000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt deleted file mode 100644 index 3d25011f0c99..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Texas Instruments ADC141S626 and ADC161S626 chips - -Required properties: - - compatible: Should be "ti,adc141s626" or "ti,adc161s626" - - reg: spi chip select number for the device - - vdda-supply: supply voltage to VDDA pin - -Recommended properties: - - spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: -adc@0 { - compatible = "ti,adc161s626"; - vdda-supply = <&vdda_fixed>; - reg = <0>; - spi-max-frequency = <4300000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt deleted file mode 100644 index e77a6f7e1001..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Texas Instruments ADS7950 family of A/DC chips - -Required properties: - - compatible: Must be one of "ti,ads7950", "ti,ads7951", "ti,ads7952", - "ti,ads7953", "ti,ads7954", "ti,ads7955", "ti,ads7956", "ti,ads7957", - "ti,ads7958", "ti,ads7959", "ti,ads7960", or "ti,ads7961" - - reg: SPI chip select number for the device - - #io-channel-cells: Must be 1 as per ../iio-bindings.txt - - vref-supply: phandle to a regulator node that supplies the 2.5V or 5V - reference voltage - -Recommended properties: - - spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: -adc@0 { - compatible = "ti,ads7957"; - reg = <0>; - #io-channel-cells = <1>; - vref-supply = <&refin_supply>; - spi-max-frequency = <10000000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt deleted file mode 100644 index e47c3759a82b..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Texas Instruments ADS8344 A/DC chip - -Required properties: - - compatible: Must be "ti,ads8344" - - reg: SPI chip select number for the device - - vref-supply: phandle to a regulator node that supplies the - reference voltage - -Recommended properties: - - spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: -adc@0 { - compatible = "ti,ads8344"; - reg = <0>; - vref-supply = <&refin_supply>; - spi-max-frequency = <10000000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt b/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt deleted file mode 100644 index 6bdd21404b57..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt +++ /dev/null @@ -1,24 +0,0 @@ -* TWL4030 Monitoring Analog to Digital Converter (MADC) - -The MADC subsystem in the TWL4030 consists of a 10-bit ADC -combined with a 16-input analog multiplexer. - -Required properties: - - compatible: Should contain "ti,twl4030-madc". - - interrupts: IRQ line for the MADC submodule. - - #io-channel-cells: Should be set to <1>. - -Optional properties: - - ti,system-uses-second-madc-irq: boolean, set if the second madc irq register - should be used, which is intended to be used - by Co-Processors (e.g. a modem). - -Example: - -&twl { - madc { - compatible = "ti,twl4030-madc"; - interrupts = <3>; - #io-channel-cells = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt deleted file mode 100644 index 1aad0514e647..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt +++ /dev/null @@ -1,36 +0,0 @@ -Freescale vf610 Analog to Digital Converter bindings - -The devicetree bindings are for the new ADC driver written for -vf610/i.MX6slx and upward SoCs from Freescale. - -Required properties: -- compatible: Should contain "fsl,vf610-adc" -- reg: Offset and length of the register set for the device -- interrupts: Should contain the interrupt for the device -- clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock. -- clock-names: Must contain "adc", matching entry in the clocks property. -- vref-supply: The regulator supply ADC reference voltage. - -Recommended properties: -- fsl,adck-max-frequency: Maximum frequencies according to datasheets operating - requirements. Three values are required, depending on conversion mode: - - Frequency in normal mode (ADLPC=0, ADHSC=0) - - Frequency in high-speed mode (ADLPC=0, ADHSC=1) - - Frequency in low-power mode (ADLPC=1, ADHSC=0) -- min-sample-time: Minimum sampling time in nanoseconds. This value has - to be chosen according to the conversion mode and the connected analog - source resistance (R_as) and capacitance (C_as). Refer the datasheet's - operating requirements. A safe default across a wide range of R_as and - C_as as well as conversion modes is 1000ns. - -Example: -adc0: adc@4003b000 { - compatible = "fsl,vf610-adc"; - reg = <0x4003b000 0x1000>; - interrupts = <0 53 0x04>; - clocks = <&clks VF610_CLK_ADC0>; - clock-names = "adc"; - fsl,adck-max-frequency = <30000000>, <40000000>, - <20000000>; - vref-supply = <®_vcc_3v3_mcu>; -}; diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 5342360e96b1..a557761d8016 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -33,6 +33,8 @@ required: - compatible - ctrl-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml index 9a89b34bdd8f..4646deeb6f7b 100644 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml @@ -19,6 +19,8 @@ description: | http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf http://www.atlas-scientific.com/_files/_datasheets/_oem/RTD_oem_datasheet.pdf http://www.atlas-scientific.com/_files/_datasheets/_probe/EZO_CO2_Datasheet.pdf + https://www.atlas-scientific.com/files/EZO_O2_datasheet.pdf + https://www.atlas-scientific.com/files/EZO_HUM_Datasheet.pdf properties: compatible: @@ -29,6 +31,8 @@ properties: - atlas,ph-sm - atlas,rtd-sm - atlas,co2-ezo + - atlas,o2-ezo + - atlas,hum-ezo reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml index 97ffcb77043d..f845b41d74c4 100644 --- a/Documentation/devicetree/bindings/iio/common.yaml +++ b/Documentation/devicetree/bindings/iio/common.yaml @@ -32,4 +32,6 @@ properties: considered 'near' to the device (an object is near to the sensor). +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml index 82424e06be27..fb2c48fc7ce4 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -49,6 +49,14 @@ properties: asserted during driver probe. maxItems: 1 + spi-max-frequency: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + channel@0: description: Represents an external channel which are connected to the DAC. Channel 0 can act both as a current @@ -130,6 +138,8 @@ required: - channel@4 - channel@5 +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml new file mode 100644 index 000000000000..edf804d0aca2 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Bindings for the Linear Technology LTC2632/2634/2636 DAC + Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf + +properties: + compatible: + enum: + - lltc,ltc2632-l12 + - lltc,ltc2632-l10 + - lltc,ltc2632-l8 + - lltc,ltc2632-h12 + - lltc,ltc2632-h10 + - lltc,ltc2632-h8 + - lltc,ltc2634-l12 + - lltc,ltc2634-l10 + - lltc,ltc2634-l8 + - lltc,ltc2634-h12 + - lltc,ltc2634-h10 + - lltc,ltc2634-h8 + - lltc,ltc2636-l12 + - lltc,ltc2636-l10 + - lltc,ltc2636-l8 + - lltc,ltc2636-h12 + - lltc,ltc2636-h10 + - lltc,ltc2636-h8 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 2000000 + + vref-supply: + description: + Phandle to the external reference voltage supply. This should + only be set if there is an external reference voltage connected to the VREF + pin. If the property is not set the internal reference is used. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + vref: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "vref-ltc2632"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "lltc,ltc2632"; + reg = <0>; /* CS0 */ + spi-max-frequency = <1000000>; + vref-supply = <&vref>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt deleted file mode 100644 index 1ab9570cf219..000000000000 --- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt +++ /dev/null @@ -1,49 +0,0 @@ -Linear Technology LTC2632/2634/2636 DAC - -Required properties: - - compatible: Has to contain one of the following: - lltc,ltc2632-l12 - lltc,ltc2632-l10 - lltc,ltc2632-l8 - lltc,ltc2632-h12 - lltc,ltc2632-h10 - lltc,ltc2632-h8 - lltc,ltc2634-l12 - lltc,ltc2634-l10 - lltc,ltc2634-l8 - lltc,ltc2634-h12 - lltc,ltc2634-h10 - lltc,ltc2634-h8 - lltc,ltc2636-l12 - lltc,ltc2636-l10 - lltc,ltc2636-l8 - lltc,ltc2636-h12 - lltc,ltc2636-h10 - lltc,ltc2636-h8 - -Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt -apply. In particular, "reg" and "spi-max-frequency" properties must be given. - -Optional properties: - - vref-supply: Phandle to the external reference voltage supply. This should - only be set if there is an external reference voltage connected to the VREF - pin. If the property is not set the internal reference is used. - -Example: - - vref: regulator-vref { - compatible = "regulator-fixed"; - regulator-name = "vref-ltc2632"; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - }; - - spi_master { - dac: ltc2632@0 { - compatible = "lltc,ltc2632-l12"; - reg = <0>; /* CS0 */ - spi-max-frequency = <1000000>; - vref-supply = <&vref>; /* optional */ - }; - }; diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml index 7ec3ec94356b..6b3a611e1cf1 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml @@ -40,12 +40,16 @@ properties: output stage will shut down until the ADF4371/ADF4372 achieves lock as measured by the digital lock detect circuitry. + spi-max-frequency: true + required: - compatible - reg - clocks - clock-names +additionalProperties: false + examples: - | spi0 { diff --git a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml new file mode 100644 index 000000000000..662ec59ca0af --- /dev/null +++ b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/gyroscope/adi,adxrs290.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope + +maintainers: + - Nishant Malpani <nish.malpani25@gmail.com> + +description: | + Bindings for the Analog Devices ADXRS290 dual-axis MEMS gyroscope device. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADXRS290.pdf + +properties: + compatible: + const: adi,adxrs290 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + spi-cpol: true + + spi-cpha: true + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - spi-max-frequency + - spi-cpol + - spi-cpha + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + gyro@0 { + compatible = "adi,adxrs290"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml new file mode 100644 index 000000000000..dc870eb2875f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/humidity/ti,hdc2010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDC2010/HDC2080 humidity and temperature iio sensors + +maintainers: + - Eugene Zaikonnikov <ez@norophonic.com> + +description: | + Relative humidity and tempereature sensors on I2C bus + + Datasheets are available at: + http://www.ti.com/product/HDC2010/datasheet + http://www.ti.com/product/HDC2080/datasheet + +properties: + compatible: + enum: + - ti,hdc2010 + - ti,hdc2080 + + vdd-supply: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + humidity@40 { + compatible = "ti,hdc2010"; + reg = <0x40>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml index 0c53009ba7d6..340be256f283 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml @@ -25,6 +25,8 @@ properties: spi-cpol: true + spi-max-frequency: true + interrupts: maxItems: 1 @@ -33,6 +35,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml index 208faaffa58d..79fba1508e89 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml @@ -116,6 +116,8 @@ allOf: dependencies: adi,sync-mode: [ clocks ] +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml index 33d8e9fd14b7..6e73cd889b5c 100644 --- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml @@ -46,10 +46,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix + spi-max-frequency: true + required: - compatible - reg +additionalProperties: false + examples: - | // Example for I2C diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index abd8d25e1136..4c1c083d0e92 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -47,11 +47,17 @@ properties: vddio-supply: description: Regulator that provides power to the bus + spi-max-frequency: true + spi-cpha: true + spi-cpol: true + required: - compatible - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml index 63bcb73ae309..479e7065d4eb 100644 --- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml +++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml @@ -36,10 +36,14 @@ properties: drive-open-drain: type: boolean + spi-max-frequency: true + required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml new file mode 100644 index 000000000000..0e8cd02759b3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor + +maintainers: + - Christian Eggers <ceggers@arri.de> + +description: | + XYZ True Color Sensor with I2C Interface + https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df + +properties: + compatible: + enum: + - ams,as73211 + + reg: + description: + I2C address of the device (0x74...0x77). + maxItems: 1 + + interrupts: + description: + Interrupt specifier for the READY interrupt generated by the device. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + as73211@74 { + compatible = "ams,as73211"; + reg = <0x74>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_color_sensor>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; /* READY */ + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml index e201a06d8fdc..60e76bc035a5 100644 --- a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml +++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml @@ -32,6 +32,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml index f671edda6641..a3a979553e32 100644 --- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml index 497300239d93..8249be99cff9 100644 --- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml index 12aa16f24772..f8a932be0d10 100644 --- a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml +++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml @@ -61,6 +61,8 @@ required: - sharp,proximity-far-hysteresis - sharp,proximity-close-hysteresis +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml index 58887a4f9c15..4d1a225e8868 100644 --- a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml +++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml @@ -24,6 +24,10 @@ properties: - vishay,vcnl4020 - vishay,vcnl4040 - vishay,vcnl4200 + + interrupts: + maxItems: 1 + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml index f0b336ac39c9..a25590a16ba7 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml @@ -55,6 +55,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml new file mode 100644 index 000000000000..5739074d3592 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Semtech's SX9310 capacitive proximity sensor + +maintainers: + - Daniel Campello <campello@chromium.org> + +description: | + Semtech's SX9310/SX9311 capacitive proximity/button solution. + + Specifications about the devices can be found at: + https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310 + +properties: + compatible: + enum: + - semtech,sx9310 + - semtech,sx9311 + + reg: + maxItems: 1 + + interrupts: + description: + The sole interrupt generated by the device used to announce the + preceding reading request has finished and that data is + available or that a close/far proximity event has happened. + maxItems: 1 + + vdd-supply: + description: Main power supply + + svdd-supply: + description: Host interface power supply + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + proximity@28 { + compatible = "semtech,sx9310"; + reg = <0x28>; + interrupt-parent = <&pio>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>; + vdd-supply = <&pp3300_a>; + svdd-supply = <&pp1800_prox>; + #io-channel-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml index 51dba64037f6..fbd3a2e32280 100644 --- a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml @@ -47,6 +47,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt b/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt index aac5f621f8dc..dfe00eb961cd 100644 --- a/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt +++ b/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt @@ -4,9 +4,15 @@ Required properties: - compatible: must be "st,vl53l0x" - reg: i2c address where to find the device +Optional properties: + - interrupts: Interrupt for notifying that new measurement is ready. + If no interrupt is specified, polling is used. + Example: vl53l0x@29 { compatible = "st,vl53l0x"; reg = <0x29>; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; }; diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml new file mode 100644 index 000000000000..054406bbd22b --- /dev/null +++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019-2020 Artur Rojek +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ADC attached joystick + +maintainers: + - Artur Rojek <contact@artur-rojek.eu> + +description: > + Bindings for joystick devices connected to ADC controllers supporting + the Industrial I/O subsystem. + +properties: + compatible: + const: adc-joystick + + io-channels: + minItems: 1 + maxItems: 1024 + description: > + List of phandle and IIO specifier pairs. + Each pair defines one ADC channel to which a joystick axis is connected. + See Documentation/devicetree/bindings/iio/iio-bindings.txt for details. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - io-channels + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +patternProperties: + "^axis@[0-9a-f]+$": + type: object + description: > + Represents a joystick axis bound to the given ADC channel. + For each entry in the io-channels list, one axis subnode with a matching + reg property must be specified. + + properties: + reg: + minimum: 0 + maximum: 1023 + description: Index of an io-channels list entry bound to this axis. + + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: EV_ABS specific event code generated by the axis. + + abs-range: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + - description: minimum value + - description: maximum value + description: > + Minimum and maximum values produced by the axis. + For an ABS_X axis this will be the left-most and right-most + inclination of the joystick. If min > max, it is left to userspace to + treat the axis as inverted. + This property is interpreted as two signed 32 bit values. + + abs-fuzz: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Amount of noise in the input value. + Omitting this property indicates the axis is precise. + + abs-flat: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Axial "deadzone", or area around the center position, where the axis + is considered to be at rest. + Omitting this property indicates the axis always returns to exactly + the center position. + + required: + - reg + - linux,code + - abs-range + + additionalProperties: false + +examples: + - | + #include <dt-bindings/iio/adc/ingenic,adc.h> + #include <dt-bindings/input/input.h> + + joystick: adc-joystick { + compatible = "adc-joystick"; + io-channels = <&adc INGENIC_ADC_TOUCH_XP>, + <&adc INGENIC_ADC_TOUCH_YP>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + linux,code = <ABS_X>; + abs-range = <3300 0>; + abs-fuzz = <4>; + abs-flat = <200>; + }; + axis@1 { + reg = <1>; + linux,code = <ABS_Y>; + abs-range = <0 3300>; + abs-fuzz = <4>; + abs-flat = <200>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml index 5b37be0be4e9..378a85c09d34 100644 --- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml +++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml @@ -48,6 +48,8 @@ required: - vdd-supply - linux,keycodes +unevaluatedProperties: false + examples: - | // Example with interrupts diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 8edcb3c31270..ab407f266bef 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -33,3 +33,5 @@ properties: power off automatically. Device with key pressed shutdown feature can specify this property. $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml index c3bf09156783..6699d5e32dca 100644 --- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml @@ -35,6 +35,8 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: Number of column lines connected to the keypad controller. +additionalProperties: true + examples: - | keypad { diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index 36dc7b56a453..a771a15f053f 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -81,3 +81,5 @@ dependencies: touchscreen-size-y: [ touchscreen-size-x ] touchscreen-x-mm: [ touchscreen-y-mm ] touchscreen-y-mm: [ touchscreen-x-mm ] + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt new file mode 100644 index 000000000000..446efb9f5f55 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt @@ -0,0 +1,40 @@ +Device tree bindings for Zinitx BT541 touchscreen controller + +Required properties: + + - compatible : Should be "zinitix,bt541" + - reg : I2C address of the chip. Should be 0x20 + - interrupts : Interrupt to which the chip is connected + +Optional properties: + + - vdd-supply : Analog power supply regulator on VCCA pin + - vddo-supply : Digital power supply regulator on VDD pin + - zinitix,mode : Mode of reporting touch points. Some modes may not work + with a particular ts firmware for unknown reasons. Available + modes are 1 and 2. Mode 2 is the default and preferred. + +The touchscreen-* properties are documented in touchscreen.txt in this +directory. + +Example: + + i2c@00000000 { + /* ... */ + + bt541@20 { + compatible = "zinitix,bt541"; + reg = <0x20>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + vdd-supply = <®_vdd_tsp>; + vddo-supply = <&pm8916_l6>; + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + zinitix,mode = <2>; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt index 6f5d23a605b7..138c544c8c8c 100644 --- a/Documentation/devicetree/bindings/interconnect/interconnect.txt +++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt @@ -19,7 +19,8 @@ directly. Required properties: - compatible : contains the interconnect provider compatible string - #interconnect-cells : number of cells in a interconnect specifier needed to - encode the interconnect node id + encode the interconnect node id and optionally add a + path tag Example: @@ -44,6 +45,10 @@ components it has to interact with. Required properties: interconnects : Pairs of phandles and interconnect provider specifier to denote the edge source and destination ports of the interconnect path. + An optional path tag value could specified as additional argument + to both endpoints and in such cases, this information will be passed + to the interconnect framework to do aggregation based on the attached + tag. Optional properties: interconnect-names : List of interconnect path name strings sorted in the same @@ -62,3 +67,20 @@ Example: interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>; interconnect-names = "sdhc-mem"; }; + +Example with path tags: + + gnoc: interconnect@17900000 { + ... + interconnect-cells = <2>; + }; + + mnoc: interconnect@1380000 { + ... + interconnect-cells = <2>; + }; + + cpu@0 { + ... + interconnects = <&gnoc MASTER_APPSS_PROC 3 &mnoc SLAVE_EBI1 3>; + } diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml index 5971fc1df08d..e23df4836c6f 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml @@ -21,6 +21,23 @@ properties: enum: - qcom,bcm-voter + qcom,tcs-wait: + description: | + Optional mask of which TCSs (Triggered Command Sets) wait for completion + upon triggering. If not specified, then the AMC and WAKE sets wait for + completion. The mask bits are available in the QCOM_ICC_TAG_* defines. + + The AMC TCS is triggered immediately when icc_set_bw() is called. The + WAKE/SLEEP TCSs are triggered when the RSC transitions between active and + sleep modes. + + In most cases, it's necessary to wait in both the AMC and WAKE sets to + ensure resources are available before use. If a specific RSC and its use + cases can ensure sufficient delay by other means, then this can be + overridden to reduce latencies. + + $ref: /schemas/types.yaml#/definitions/uint32 + required: - compatible @@ -39,7 +56,10 @@ examples: # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt - | + #include <dt-bindings/interconnect/qcom,icc.h> + disp_bcm_voter: bcm_voter { compatible = "qcom,bcm-voter"; + qcom,tcs-wait = <QCOM_ICC_TAG_AMC>; }; ... diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml index 91f70c9067d1..d6a95c3cb26f 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml @@ -19,6 +19,8 @@ properties: enum: - qcom,sc7180-osm-l3 - qcom,sdm845-osm-l3 + - qcom,sm8150-osm-l3 + - qcom,sm8250-epss-l3 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index dab17c0716ce..30c2a092d2d3 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -1,16 +1,17 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml# +$id: http://devicetree.org/schemas/interconnect/qcom,rpmh.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm SDM845 Network-On-Chip Interconnect +title: Qualcomm RPMh Network-On-Chip Interconnect maintainers: - Georgi Djakov <georgi.djakov@linaro.org> + - Odelu Kukatla <okukatla@codeaurora.org> description: | - SDM845 interconnect providers support system bandwidth requirements through + RPMh interconnect providers support system bandwidth requirements through RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is able to communicate with the BCM through the Resource State Coordinator (RSC) associated with each execution environment. Provider nodes must point to at @@ -23,6 +24,19 @@ properties: compatible: enum: + - qcom,sc7180-aggre1-noc + - qcom,sc7180-aggre2-noc + - qcom,sc7180-camnoc-virt + - qcom,sc7180-compute-noc + - qcom,sc7180-config-noc + - qcom,sc7180-dc-noc + - qcom,sc7180-gem-noc + - qcom,sc7180-ipa-virt + - qcom,sc7180-mc-virt + - qcom,sc7180-mmss-noc + - qcom,sc7180-npu-noc + - qcom,sc7180-qup-virt + - qcom,sc7180-system-noc - qcom,sdm845-aggre1-noc - qcom,sdm845-aggre2-noc - qcom,sdm845-config-noc @@ -31,6 +45,28 @@ properties: - qcom,sdm845-mem-noc - qcom,sdm845-mmss-noc - qcom,sdm845-system-noc + - qcom,sm8150-aggre1-noc + - qcom,sm8150-aggre2-noc + - qcom,sm8150-camnoc-noc + - qcom,sm8150-compute-noc + - qcom,sm8150-config-noc + - qcom,sm8150-dc-noc + - qcom,sm8150-gem-noc + - qcom,sm8150-ipa-virt + - qcom,sm8150-mc-virt + - qcom,sm8150-mmss-noc + - qcom,sm8150-system-noc + - qcom,sm8250-aggre1-noc + - qcom,sm8250-aggre2-noc + - qcom,sm8250-compute-noc + - qcom,sm8250-config-noc + - qcom,sm8250-dc-noc + - qcom,sm8250-gem-noc + - qcom,sm8250-ipa-virt + - qcom,sm8250-mc-virt + - qcom,sm8250-mmss-noc + - qcom,sm8250-npu-noc + - qcom,sm8250-system-noc '#interconnect-cells': const: 1 diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml deleted file mode 100644 index 8659048f92a7..000000000000 --- a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml +++ /dev/null @@ -1,85 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm SC7180 Network-On-Chip Interconnect - -maintainers: - - Odelu Kukatla <okukatla@codeaurora.org> - -description: | - SC7180 interconnect providers support system bandwidth requirements through - RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is - able to communicate with the BCM through the Resource State Coordinator (RSC) - associated with each execution environment. Provider nodes must point to at - least one RPMh device child node pertaining to their RSC and each provider - can map to multiple RPMh resources. - -properties: - reg: - maxItems: 1 - - compatible: - enum: - - qcom,sc7180-aggre1-noc - - qcom,sc7180-aggre2-noc - - qcom,sc7180-camnoc-virt - - qcom,sc7180-compute-noc - - qcom,sc7180-config-noc - - qcom,sc7180-dc-noc - - qcom,sc7180-gem-noc - - qcom,sc7180-ipa-virt - - qcom,sc7180-mc-virt - - qcom,sc7180-mmss-noc - - qcom,sc7180-npu-noc - - qcom,sc7180-qup-virt - - qcom,sc7180-system-noc - - '#interconnect-cells': - const: 1 - - qcom,bcm-voters: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: | - List of phandles to qcom,bcm-voter nodes that are required by - this interconnect to send RPMh commands. - - qcom,bcm-voter-names: - $ref: /schemas/types.yaml#/definitions/string-array - description: | - Names for each of the qcom,bcm-voters specified. - -required: - - compatible - - reg - - '#interconnect-cells' - - qcom,bcm-voters - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interconnect/qcom,sc7180.h> - - config_noc: interconnect@1500000 { - compatible = "qcom,sc7180-config-noc"; - reg = <0x01500000 0x28000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - system_noc: interconnect@1620000 { - compatible = "qcom,sc7180-system-noc"; - reg = <0x01620000 0x17080>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - mmss_noc: interconnect@1740000 { - compatible = "qcom,sc7180-mmss-noc"; - reg = <0x01740000 0x1c100>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml new file mode 100644 index 000000000000..5da333c644c9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/actions,owl-sirq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi Owl SoCs SIRQ interrupt controller + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + +description: | + This interrupt controller is found in the Actions Semi Owl SoCs (S500, S700 + and S900) and provides support for handling up to 3 external interrupt lines. + +properties: + compatible: + enum: + - actions,s500-sirq + - actions,s700-sirq + - actions,s900-sirq + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: + The first cell is the input IRQ number, between 0 and 2, while the second + cell is the trigger type as defined in interrupt.txt in this directory. + + 'interrupts': + description: | + Contains the GIC SPI IRQs mapped to the external interrupt lines. + They shall be specified sequentially from output 0 to 2. + minItems: 3 + maxItems: 3 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + - 'interrupts' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sirq: interrupt-controller@b01b0200 { + compatible = "actions,s500-sirq"; + reg = <0xb01b0200 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */ + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */ + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */ + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml index 360a575ef8b0..3b11a1a15398 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml @@ -11,9 +11,11 @@ maintainers: properties: compatible: - enum: - - fsl,imx8m-irqsteer - - fsl,imx-irqsteer + oneOf: + - const: fsl,imx-irqsteer + - items: + - const: fsl,imx8m-irqsteer + - const: fsl,imx-irqsteer reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt deleted file mode 100644 index 42431f44697f..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt +++ /dev/null @@ -1,82 +0,0 @@ -* Meta External Trigger Controller Binding - -This binding specifies what properties must be available in the device tree -representation of a Meta external trigger controller. - -Required properties: - - - compatible: Specifies the compatibility list for the interrupt controller. - The type shall be <string> and the value shall include "img,meta-intc". - - - num-banks: Specifies the number of interrupt banks (each of which can - handle 32 interrupt sources). - - - interrupt-controller: The presence of this property identifies the node - as an interrupt controller. No property value shall be defined. - - - #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The type shall be a <u32> and the value shall be 2. - - - #address-cells: Specifies the number of cells needed to encode an - address. The type shall be <u32> and the value shall be 0. As such, - 'interrupt-map' nodes do not have to specify a parent unit address. - -Optional properties: - - - no-mask: The controller doesn't have any mask registers. - -* Interrupt Specifier Definition - - Interrupt specifiers consists of 2 cells encoded as follows: - - - <1st-cell>: The interrupt-number that identifies the interrupt source. - - - <2nd-cell>: The Linux interrupt flags containing level-sense information, - encoded as follows: - 1 = edge triggered - 4 = level-sensitive - -* Examples - -Example 1: - - /* - * Meta external trigger block - */ - intc: intc { - // This is an interrupt controller node. - interrupt-controller; - - // No address cells so that 'interrupt-map' nodes which - // reference this interrupt controller node do not need a parent - // address specifier. - #address-cells = <0>; - - // Two cells to encode interrupt sources. - #interrupt-cells = <2>; - - // Number of interrupt banks - num-banks = <2>; - - // No HWMASKEXT is available (specify on Chorus2 and Comet ES1) - no-mask; - - // Compatible with Meta hardware trigger block. - compatible = "img,meta-intc"; - }; - -Example 2: - - /* - * An interrupt generating device that is wired to a Meta external - * trigger block. - */ - uart1: uart@02004c00 { - // Interrupt source '5' that is level-sensitive. - // Note that there are only two cells as specified in the - // interrupt parent's '#interrupt-cells' property. - interrupts = <5 4 /* level */>; - - // The interrupt controller that this device is wired to. - interrupt-parent = <&intc>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml index 02a3cf470518..0a046be8d1cd 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml @@ -49,6 +49,8 @@ required: - "#interrupt-cells" - interrupt-controller +additionalProperties: false + examples: - | intc: interrupt-controller@10001000 { diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml new file mode 100644 index 000000000000..e8dfa6507f64 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Interrupt controller driver for the sl28cpld board management controller + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + + The following interrupts are available. All types and levels are fixed + and handled by the board management controller. + + ==== ============= ================================== + IRQ line/device description + ==== ============= ================================== + 0 RTC_INT# Interrupt line from on-board RTC + 1 SMB_ALERT# Event on SMB_ALERT# line (P1) + 2 ESPI_ALERT0# Event on ESPI_ALERT0# line (S43) + 3 ESPI_ALERT1# Event on ESPI_ALERT1# line (S44) + 4 PWR_BTN# Event on PWR_BTN# line (P128) + 5 SLEEP# Event on SLEEP# line (S149) + 6 watchdog Interrupt of the internal watchdog + 7 n/a not used + ==== ============= ================================== + +properties: + compatible: + enum: + - kontron,sl28cpld-intc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + +required: + - compatible + - interrupts + - "#interrupt-cells" + - interrupt-controller + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml index c8861cbbb8b5..d1d52d1db2be 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml @@ -41,6 +41,8 @@ required: - interrupt-controller - '#interrupt-cells' +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 03fc4f5b4b39..f38e0113f360 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -67,6 +67,8 @@ required: - 'loongson,parent_int_map' +unevaluatedProperties: false + examples: - | iointc: interrupt-controller@3ff01400 { diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml index 1b256d9dd92a..1f6fd73d4624 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml @@ -46,6 +46,8 @@ required: - loongson,msi-base-vec - loongson,msi-num-vecs +additionalProperties: true #fixme + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml index a6dcbb2971a9..fdd6a38a31db 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml @@ -41,6 +41,8 @@ required: - interrupt-controller - '#interrupt-cells' +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml new file mode 100644 index 000000000000..bbf0f26cd008 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/mstar,mst-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MStar Interrupt Controller + +maintainers: + - Mark-PK Tsai <mark-pk.tsai@mediatek.com> + +description: |+ + MStar, SigmaStar and Mediatek TV SoCs contain multiple legacy + interrupt controllers that routes interrupts to the GIC. + + The HW block exposes a number of interrupt controllers, each + can support up to 64 interrupts. + +properties: + compatible: + const: mstar,mst-intc + + interrupt-controller: true + + "#interrupt-cells": + const: 3 + description: | + Use the same format as specified by GIC in arm,gic.yaml. + + reg: + maxItems: 1 + + mstar,irqs-map-range: + description: | + The range <start, end> of parent interrupt controller's interrupt + lines that are hardwired to mstar interrupt controller. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 + + mstar,intc-no-eoi: + description: + Mark this controller has no End Of Interrupt(EOI) implementation. + type: boolean + +required: + - compatible + - reg + - mstar,irqs-map-range + +additionalProperties: false + +examples: + - | + mst_intc0: interrupt-controller@1f2032d0 { + compatible = "mstar,mst-intc"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0x1f2032d0 0x30>; + mstar,irqs-map-range = <0 63>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml index ce6aaff15214..039e08af98bb 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml @@ -95,7 +95,7 @@ properties: additionalProperties: false -unevaluatedProperties: false +additionalProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt deleted file mode 100644 index 6adf7a6e8825..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt +++ /dev/null @@ -1,58 +0,0 @@ -SiFive Platform-Level Interrupt Controller (PLIC) -------------------------------------------------- - -SiFive SOCs include an implementation of the Platform-Level Interrupt Controller -(PLIC) high-level specification in the RISC-V Privileged Architecture -specification. The PLIC connects all external interrupts in the system to all -hart contexts in the system, via the external interrupt source in each hart. - -A hart context is a privilege mode in a hardware execution thread. For example, -in an 4 core system with 2-way SMT, you have 8 harts and probably at least two -privilege modes per hart; machine mode and supervisor mode. - -Each interrupt can be enabled on per-context basis. Any context can claim -a pending enabled interrupt and then release it once it has been handled. - -Each interrupt has a configurable priority. Higher priority interrupts are -serviced first. Each context can specify a priority threshold. Interrupts -with priority below this threshold will not cause the PLIC to raise its -interrupt line leading to the context. - -While the PLIC supports both edge-triggered and level-triggered interrupts, -interrupt handlers are oblivious to this distinction and therefore it is not -specified in the PLIC device-tree binding. - -While the RISC-V ISA doesn't specify a memory layout for the PLIC, the -"sifive,plic-1.0.0" device is a concrete implementation of the PLIC that -contains a specific memory layout, which is documented in chapter 8 of the -SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>. - -Required properties: -- compatible : "sifive,plic-1.0.0" and a string identifying the actual - detailed implementation in case that specific bugs need to be worked around. -- #address-cells : should be <0> or more. -- #interrupt-cells : should be <1> or more. -- interrupt-controller : Identifies the node as an interrupt controller. -- reg : Should contain 1 register range (address and length). -- interrupts-extended : Specifies which contexts are connected to the PLIC, - with "-1" specifying that a context is not present. Each node pointed - to should be a riscv,cpu-intc node, which has a riscv node as parent. -- riscv,ndev: Specifies how many external interrupts are supported by - this controller. - -Example: - - plic: interrupt-controller@c000000 { - #address-cells = <0>; - #interrupt-cells = <1>; - compatible = "sifive,plic-1.0.0", "sifive,fu540-c000-plic"; - interrupt-controller; - interrupts-extended = < - &cpu0-intc 11 - &cpu1-intc 11 &cpu1-intc 9 - &cpu2-intc 11 &cpu2-intc 9 - &cpu3-intc 11 &cpu3-intc 9 - &cpu4-intc 11 &cpu4-intc 9>; - reg = <0xc000000 0x4000000>; - riscv,ndev = <10>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml new file mode 100644 index 000000000000..b9a61c9f7530 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright (C) 2020 SiFive, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive Platform-Level Interrupt Controller (PLIC) + +description: + SiFive SOCs include an implementation of the Platform-Level Interrupt Controller + (PLIC) high-level specification in the RISC-V Privileged Architecture + specification. The PLIC connects all external interrupts in the system to all + hart contexts in the system, via the external interrupt source in each hart. + + A hart context is a privilege mode in a hardware execution thread. For example, + in an 4 core system with 2-way SMT, you have 8 harts and probably at least two + privilege modes per hart; machine mode and supervisor mode. + + Each interrupt can be enabled on per-context basis. Any context can claim + a pending enabled interrupt and then release it once it has been handled. + + Each interrupt has a configurable priority. Higher priority interrupts are + serviced first. Each context can specify a priority threshold. Interrupts + with priority below this threshold will not cause the PLIC to raise its + interrupt line leading to the context. + + While the PLIC supports both edge-triggered and level-triggered interrupts, + interrupt handlers are oblivious to this distinction and therefore it is not + specified in the PLIC device-tree binding. + + While the RISC-V ISA doesn't specify a memory layout for the PLIC, the + "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that + contains a specific memory layout, which is documented in chapter 8 of the + SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>. + +maintainers: + - Sagar Kadam <sagar.kadam@sifive.com> + - Paul Walmsley <paul.walmsley@sifive.com> + - Palmer Dabbelt <palmer@dabbelt.com> + +properties: + compatible: + items: + - const: sifive,fu540-c000-plic + - const: sifive,plic-1.0.0 + + reg: + maxItems: 1 + + '#address-cells': + const: 0 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + interrupts-extended: + minItems: 1 + description: + Specifies which contexts are connected to the PLIC, with "-1" specifying + that a context is not present. Each node pointed to should be a + riscv,cpu-intc node, which has a riscv node as parent. + + riscv,ndev: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: + Specifies how many external interrupts are supported by this controller. + +required: + - compatible + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + - reg + - interrupts-extended + - riscv,ndev + +additionalProperties: false + +examples: + - | + plic: interrupt-controller@c000000 { + #address-cells = <0>; + #interrupt-cells = <1>; + compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; + interrupt-controller; + interrupts-extended = < + &cpu0_intc 11 + &cpu1_intc 11 &cpu1_intc 9 + &cpu2_intc 11 &cpu2_intc 9 + &cpu3_intc 11 &cpu3_intc 9 + &cpu4_intc 11 &cpu4_intc 9>; + reg = <0xc000000 0x4000000>; + riscv,ndev = <10>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt index 086ff08322db..2db59df9408f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt @@ -2,7 +2,8 @@ Synopsys DesignWare APB interrupt controller (dw_apb_ictl) Synopsys DesignWare provides interrupt controller IP for APB known as dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with -APB bus, e.g. Marvell Armada 1500. +APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt +controller in some SoCs, e.g. Hisilicon SD5203. Required properties: - compatible: shall be "snps,dw-apb-ictl" @@ -10,6 +11,8 @@ Required properties: region starting with ENABLE_LOW register - interrupt-controller: identifies the node as an interrupt controller - #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1 + +Additional required property when it's used as secondary interrupt controller: - interrupts: interrupt reference to primary interrupt controller The interrupt sources map to the corresponding bits in the interrupt @@ -21,6 +24,7 @@ registers, i.e. - (optional) fast interrupts start at 64. Example: + /* dw_apb_ictl is used as secondary interrupt controller */ aic: interrupt-controller@3000 { compatible = "snps,dw-apb-ictl"; reg = <0x3000 0xc00>; @@ -29,3 +33,11 @@ Example: interrupt-parent = <&gic>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; }; + + /* dw_apb_ictl is used as primary interrupt controller */ + vic: interrupt-controller@10130000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x10130000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml new file mode 100644 index 000000000000..bbf79d125675 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI PRU-ICSS Local Interrupt Controller + +maintainers: + - Suman Anna <s-anna@ti.com> + +description: | + Each PRU-ICSS has a single interrupt controller instance that is common + to all the PRU cores. Most interrupt controllers can route 64 input events + which are then mapped to 10 possible output interrupts through two levels + of mapping. The input events can be triggered by either the PRUs and/or + various other PRUSS internal and external peripherals. The first 2 output + interrupts (0, 1) are fed exclusively to the internal PRU cores, with the + remaining 8 (2 through 9) connected to external interrupt controllers + including the MPU and/or other PRUSS instances, DSPs or devices. + + The property "ti,irqs-reserved" is used for denoting the connection + differences on the output interrupts 2 through 9. If this property is not + defined, it implies that all the PRUSS INTC output interrupts 2 through 9 + (host_intr0 through host_intr7) are connected exclusively to the Arm interrupt + controller. + + The K3 family of SoCs can handle 160 input events that can be mapped to 20 + different possible output interrupts. The additional output interrupts (10 + through 19) are connected to new sub-modules within the ICSSG instances. + + This interrupt-controller node should be defined as a child node of the + corresponding PRUSS node. The node should be named "interrupt-controller". + +properties: + compatible: + enum: + - ti,pruss-intc + - ti,icssg-intc + description: | + Use "ti,pruss-intc" for OMAP-L13x/AM18x/DA850 SoCs, + AM335x family of SoCs, + AM437x family of SoCs, + AM57xx family of SoCs + 66AK2G family of SoCs + Use "ti,icssg-intc" for K3 AM65x & J721E family of SoCs + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 8 + description: | + All the interrupts generated towards the main host processor in the SoC. + A shared interrupt can be skipped if the desired destination and usage is + by a different processor/device. + + interrupt-names: + minItems: 1 + maxItems: 8 + items: + pattern: host_intr[0-7] + description: | + Should use one of the above names for each valid host event interrupt + connected to Arm interrupt controller, the name should match the + corresponding host event interrupt number. + + interrupt-controller: true + + "#interrupt-cells": + const: 3 + description: | + Client users shall use the PRU System event number (the interrupt source + that the client is interested in) [cell 1], PRU channel [cell 2] and PRU + host_event (target) [cell 3] as the value of the interrupts property in + their node. The system events can be mapped to some output host + interrupts through 2 levels of many-to-one mapping i.e. events to channel + mapping and channels to host interrupts so through this property entire + mapping is provided. + + ti,irqs-reserved: + $ref: /schemas/types.yaml#definitions/uint8 + description: | + Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC + output interrupts 2 through 9) that are not connected to the Arm interrupt + controller or are shared and used by other devices or processors in the + SoC. Define this property when any of 8 interrupts should not be handled + by Arm interrupt controller. + Eg: - AM437x and 66AK2G SoCs do not have "host_intr5" interrupt + connected to MPU + - AM65x and J721E SoCs have "host_intr5", "host_intr6" and + "host_intr7" interrupts connected to MPU, and other ICSSG + instances. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + /* AM33xx PRU-ICSS */ + pruss: pruss@0 { + compatible = "ti,am3356-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupts = <20 21 22 23 24 25 26 27>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + interrupt-controller; + #interrupt-cells = <3>; + }; + }; + + - | + + /* AM4376 PRU-ICSS */ + #include <dt-bindings/interrupt-controller/arm-gic.h> + pruss@0 { + compatible = "ti,am4376-pruss"; + reg = <0x0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", + "host_intr6", "host_intr7"; + ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */ + }; + }; diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt index c1ccd8582eb2..ac949f7fe3d4 100644 --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt @@ -61,6 +61,7 @@ Required properties: "mediatek,mt6779-m4u" for mt6779 which uses generation two m4u HW. "mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses generation one m4u HW. + "mediatek,mt8167-m4u" for mt8167 which uses generation two m4u HW. "mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW. "mediatek,mt8183-m4u" for mt8183 which uses generation two m4u HW. - reg : m4u register base and size. @@ -80,6 +81,7 @@ Required properties: dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623 dt-binding/memory/mt2712-larb-port.h for mt2712, dt-binding/memory/mt6779-larb-port.h for mt6779, + dt-binding/memory/mt8167-larb-port.h for mt8167, dt-binding/memory/mt8173-larb-port.h for mt8173, and dt-binding/memory/mt8183-larb-port.h for mt8183. diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml index 6bfa090fd73a..cde1afa8dfd6 100644 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml @@ -20,6 +20,7 @@ properties: - items: - enum: - renesas,ipmmu-r8a73a4 # R-Mobile APE6 + - renesas,ipmmu-r8a7742 # RZ/G1H - renesas,ipmmu-r8a7743 # RZ/G1M - renesas,ipmmu-r8a7744 # RZ/G1N - renesas,ipmmu-r8a7745 # RZ/G1E @@ -32,8 +33,8 @@ properties: - enum: - renesas,ipmmu-r8a774a1 # RZ/G2M - renesas,ipmmu-r8a774b1 # RZ/G2N - - renesas,ipmmu-r8a774e1 # RZ/G2H - renesas,ipmmu-r8a774c0 # RZ/G2E + - renesas,ipmmu-r8a774e1 # RZ/G2H - renesas,ipmmu-r8a7795 # R-Car H3 - renesas,ipmmu-r8a7796 # R-Car M3-W - renesas,ipmmu-r8a77961 # R-Car M3-W+ diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml index 58fa76ee6176..898e3267893a 100644 --- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml @@ -49,6 +49,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | smic@fff3a000 { diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml new file mode 100644 index 000000000000..4e7e95e331a5 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common backlight properties + +maintainers: + - Lee Jones <lee.jones@linaro.org> + - Daniel Thompson <daniel.thompson@linaro.org> + - Jingoo Han <jingoohan1@gmail.com> + +description: + Backlight devices provide backlight for different types of graphical + displays. They are typically but not necessarily implemented using a white + LED powered by a boost converter. + +properties: + default-brightness: + description: + The default brightness that should be applied to the LED by the operating + system on start-up. The brightness should not exceed the brightness the + LED can provide. + $ref: /schemas/types.yaml#definitions/uint32 + + max-brightness: + description: + Normally the maximum brightness is determined by the hardware and this + property is not required. This property is used to put a software limit + on the brightness apart from what the driver says, as it could happen + that a LED can be made so bright that it gets damaged or causes damage + due to restrictions in a specific system, such as mounting conditions. + $ref: /schemas/types.yaml#definitions/uint32 diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml new file mode 100644 index 000000000000..7a6ec1f8c0f3 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kinetic Technologies KTD253 one-wire backlight + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Kinetic Technologies KTD253 is a white LED backlight that is + controlled by a single GPIO line. If you just turn on the backlight + it goes to maximum backlight then you can set the level of backlight + using pulses on the enable wire. This is sometimes referred to as + "expresswire". + +allOf: + - $ref: common.yaml# + +properties: + compatible: + const: kinetic,ktd253 + + enable-gpios: + description: GPIO to use to enable/disable and dim the backlight. + maxItems: 1 + + default-brightness: true + max-brightness: true + +required: + - compatible + - enable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + backlight { + compatible = "kinetic,ktd253"; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + default-brightness = <13>; + }; diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index a2a541bca73c..08b6700ca61e 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -156,6 +156,8 @@ properties: Maximum timeout in microseconds after which the flash LED is turned off. Required for flash LED nodes with configurable timeout. +additionalProperties: true + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml index 24ad1446445e..fe7fa25877fd 100644 --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml @@ -30,7 +30,7 @@ properties: const: 0 patternProperties: - "^multi-led[0-9a-f]$": + "^multi-led@[0-9a-b]$": type: object allOf: - $ref: leds-class-multicolor.yaml# diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml index b55e1f1308a4..b1a53f054b89 100644 --- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml @@ -34,4 +34,7 @@ patternProperties: required: - color + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt index fc2603484544..676d43ec8169 100644 --- a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt +++ b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt @@ -16,6 +16,7 @@ Optional properties: - audio-gain-db : audio gain selection for external analog modulation input. Valid values: 0 - 21, step by 3 (rounded down) Default: 0 +- shutdown-gpios : Specifier of the GPIO connected to SDB pin of the chip. Each led is represented as a sub-node of the issi,is31fl319x device. There can be less leds subnodes than the chip can support but not more. @@ -44,6 +45,7 @@ fancy_leds: leds@65 { #address-cells = <1>; #size-cells = <0>; reg = <0x65>; + shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; red_aux: led@1 { label = "red:aux"; diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml new file mode 100644 index 000000000000..947542a253ec --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-lp50xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LED driver for LP50XX RGB LED from Texas Instruments. + +maintainers: + - Dan Murphy <dmurphy@ti.com> + +description: | + The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into + a LED group or control them individually. + + The difference in these RGB LED drivers is the number of supported RGB + modules. + + For more product information please see the link below: + https://www.ti.com/lit/ds/symlink/lp5012.pdf + https://www.ti.com/lit/ds/symlink/lp5024.pdf + https://www.ti.com/lit/ds/symlink/lp5036.pdf + +properties: + compatible: + enum: + - ti,lp5009 + - ti,lp5012 + - ti,lp5018 + - ti,lp5024 + - ti,lp5030 + - ti,lp5036 + + reg: + maxItems: 1 + description: + I2C slave address + lp5009/12 - 0x14, 0x15, 0x16, 0x17 + lp5018/24 - 0x28, 0x29, 0x2a, 0x2b + lp5030/36 - 0x30, 0x31, 0x32, 0x33 + + enable-gpios: + maxItems: 1 + description: GPIO pin to enable/disable the device. + + vled-supply: + description: LED supply. + +patternProperties: + '^multi-led@[0-9a-f]$': + type: object + allOf: + - $ref: leds-class-multicolor.yaml# + properties: + reg: + minItems: 1 + maxItems: 12 + description: + This property denotes the LED module number(s) that is used on the + for the child node. The LED modules can either be used stand alone + or grouped into a module bank. + + patternProperties: + "(^led-[0-9a-f]$|led)": + type: object + $ref: common.yaml# + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@14 { + compatible = "ti,lp5009"; + reg = <0x14>; + #address-cells = <1>; + #size-cells = <0>; + enable-gpios = <&gpio1 16>; + + multi-led@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_CHARGING; + + led-0 { + color = <LED_COLOR_ID_RED>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + }; + + led-2 { + color = <LED_COLOR_ID_BLUE>; + }; + }; + + multi-led@2 { + #address-cells = <1>; + #size-cells = <2>; + reg = <0x2 0x3 0x5>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STANDBY; + + led-6 { + color = <LED_COLOR_ID_RED>; + }; + + led-7 { + color = <LED_COLOR_ID_GREEN>; + }; + + led-8 { + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml index b1bb3feb0f4d..58e974793a79 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -58,6 +58,12 @@ properties: - 2 # D1~6 with VOUT, D7~9 with VDD - 3 # D1~9 are connected to VOUT + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + patternProperties: "(^led@[0-9a-f]$|led)": type: object @@ -98,6 +104,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/leds/common.h> @@ -189,7 +197,7 @@ examples: #address-cells = <1>; #size-cells = <0>; reg = <0x2>; - color = <LED_COLOR_ID_MULTI>; + color = <LED_COLOR_ID_RGB>; function = LED_FUNCTION_STANDBY; linux,default-trigger = "heartbeat"; diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt b/Documentation/devicetree/bindings/leds/leds-pca955x.txt index 7a5830f8d5ab..817f460f3a72 100644 --- a/Documentation/devicetree/bindings/leds/leds-pca955x.txt +++ b/Documentation/devicetree/bindings/leds/leds-pca955x.txt @@ -9,6 +9,7 @@ Required properties: "nxp,pca9550" "nxp,pca9551" "nxp,pca9552" + "ibm,pca9552" "nxp,pca9553" - #address-cells: must be 1 - #size-cells: must be 0 diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt deleted file mode 100644 index bad9102796f3..000000000000 --- a/Documentation/devicetree/bindings/leds/tca6507.txt +++ /dev/null @@ -1,49 +0,0 @@ -LEDs connected to tca6507 - -Required properties: -- compatible : should be : "ti,tca6507". -- #address-cells: must be 1 -- #size-cells: must be 0 -- reg: typically 0x45. - -Optional properties: -- gpio-controller: allows lines to be used as output-only GPIOs. -- #gpio-cells: if present, must not be 0. - -Each led is represented as a sub-node of the ti,tca6507 device. - -LED sub-node properties: -- label : (optional) see Documentation/devicetree/bindings/leds/common.txt -- reg : number of LED line (could be from 0 to 6) -- linux,default-trigger : (optional) - see Documentation/devicetree/bindings/leds/common.txt -- compatible: either "led" (the default) or "gpio". - -Examples: - -tca6507@45 { - compatible = "ti,tca6507"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x45>; - - gpio-controller; - #gpio-cells = <2>; - - led0: red-aux@0 { - label = "red:aux"; - reg = <0x0>; - }; - - led1: green-aux@1 { - label = "green:aux"; - reg = <0x5>; - linux,default-trigger = "default-on"; - }; - - wifi-reset@6 { - reg = <0x6>; - compatible = "gpio"; - }; -}; - diff --git a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml new file mode 100644 index 000000000000..94c307c98762 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/ti,tca6507.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TCA6507 LED and GPIO controller + +maintainers: + - NeilBrown <neilb@suse.de> + +description: + The TCA6507 is a programmable LED controller connected via I2C that can drive + 7 separate lines either by holding them low, or by pulsing them with modulated + width. + +properties: + compatible: + const: ti,tca6507 + + reg: + description: I2C slave address of the controller. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-line-names: true + +patternProperties: + "^led@[0-6]$": + type: object + + $ref: common.yaml# + + properties: + reg: + minimum: 0 + maximum: 6 + + required: + - reg + + "^gpio@[0-6]$": + type: object + + properties: + compatible: + const: gpio + + reg: + minimum: 0 + maximum: 6 + + additionalProperties: false + + required: + - reg + - compatible + +if: + patternProperties: + "^gpio@[0-6]$": + properties: + compatible: + contains: + const: gpio +then: + required: + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@45 { + compatible = "ti,tca6507"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x45>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "wifi_reset@6"; + + led@0 { + label = "gta04:red:aux"; + reg = <0x0>; + }; + + led@1 { + label = "gta04:green:aux"; + reg = <0x1>; + }; + + led@3 { + reg = <0x3>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + linux,default-trigger = "default-on"; + }; + + led@4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + reg = <0x4>; + }; + + gpio@6 { + compatible = "gpio"; + reg = <0x6>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml index 0618003e40bd..89a1cde2b8aa 100644 --- a/Documentation/devicetree/bindings/leds/trigger-source.yaml +++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml @@ -21,4 +21,6 @@ properties: trigger sources (e.g. a specific USB port). enum: [ 0, 1 ] +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml new file mode 100644 index 000000000000..d43791a2dde7 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM MHU Mailbox Controller + +maintainers: + - Jassi Brar <jaswinder.singh@linaro.org> + +description: | + The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3 + independent channels/links to communicate with remote processor(s). MHU links + are hardwired on a platform. A link raises interrupt for any received data. + However, there is no specified way of knowing if the sent data has been read + by the remote. This driver assumes the sender polls STAT register and the + remote clears it after having read the data. The last channel is specified to + be a 'Secure' resource, hence can't be used by Linux running NS. + + The MHU hardware also allows operations in doorbell mode. The MHU drives the + interrupt signal using a 32-bit register, with all 32-bits logically ORed + together. It provides a set of registers to enable software to set, clear and + check the status of each of the bits of this register independently. The use + of 32 bits per interrupt line enables software to provide more information + about the source of the interrupt. For example, each bit of the register can + be associated with a type of event that can contribute to raising the + interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote + processor. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,mhu + - arm,mhu-doorbell + required: + - compatible + +properties: + compatible: + oneOf: + - description: Data transfer mode + items: + - const: arm,mhu + - const: arm,primecell + + - description: Doorbell mode + items: + - const: arm,mhu-doorbell + - const: arm,primecell + + + reg: + maxItems: 1 + + interrupts: + items: + - description: low-priority non-secure + - description: high-priority non-secure + - description: Secure + maxItems: 3 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: apb_pclk + + '#mbox-cells': + description: | + Set to 1 in data transfer mode and represents index of the channel. + Set to 2 in doorbell mode and represents index of the channel and doorbell + number. + enum: [ 1, 2 ] + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + # Data transfer mode. + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhuA: mailbox@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mhu", "arm,primecell"; + reg = <0 0x2b1f0000 0 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + + mhu_client_scb: scb@2e000000 { + compatible = "fujitsu,mb86s70-scb-1.0"; + reg = <0 0x2e000000 0 0x4000>; + mboxes = <&mhuA 1>; /* HP-NonSecure */ + }; + }; + + # Doorbell mode. + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhuB: mailbox@2b2f0000 { + #mbox-cells = <2>; + compatible = "arm,mhu-doorbell", "arm,primecell"; + reg = <0 0x2b2f0000 0 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + + mhu_client_scpi: scpi@2f000000 { + compatible = "arm,scpi"; + reg = <0 0x2f000000 0 0x200>; + mboxes = <&mhuB 1 4>; /* HP-NonSecure, 5th doorbell */ + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt deleted file mode 100644 index 4971f03f0b33..000000000000 --- a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt +++ /dev/null @@ -1,43 +0,0 @@ -ARM MHU Mailbox Driver -====================== - -The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has -3 independent channels/links to communicate with remote processor(s). - MHU links are hardwired on a platform. A link raises interrupt for any -received data. However, there is no specified way of knowing if the sent -data has been read by the remote. This driver assumes the sender polls -STAT register and the remote clears it after having read the data. -The last channel is specified to be a 'Secure' resource, hence can't be -used by Linux running NS. - -Mailbox Device Node: -==================== - -Required properties: --------------------- -- compatible: Shall be "arm,mhu" & "arm,primecell" -- reg: Contains the mailbox register address range (base - address and length) -- #mbox-cells Shall be 1 - the index of the channel needed. -- interrupts: Contains the interrupt information corresponding to - each of the 3 links of MHU. - -Example: --------- - - mhu: mailbox@2b1f0000 { - #mbox-cells = <1>; - compatible = "arm,mhu", "arm,primecell"; - reg = <0 0x2b1f0000 0x1000>; - interrupts = <0 36 4>, /* LP-NonSecure */ - <0 35 4>, /* HP-NonSecure */ - <0 37 4>; /* Secure */ - clocks = <&clock 0 2 1>; - clock-names = "apb_pclk"; - }; - - mhu_client: scb@2e000000 { - compatible = "fujitsu,mb86s70-scb-1.0"; - reg = <0 0x2e000000 0x4000>; - mboxes = <&mhu 1>; /* HP-NonSecure */ - }; diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml index 8a3470b64d06..15cef82cd356 100644 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -38,8 +38,9 @@ properties: - const: fsl,imx6sx-mu - description: To communicate with i.MX8 SCU with fast IPC items: - - const: fsl,imx8qxp-mu - const: fsl,imx8-mu-scu + - const: fsl,imx8qxp-mu + - const: fsl,imx6sx-mu reg: maxItems: 1 @@ -71,6 +72,9 @@ properties: description: boolean, if present, means it is for side B MU. type: boolean + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt index 35c3f56b7f7b..5fe80c1c19fc 100644 --- a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt +++ b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt @@ -69,7 +69,7 @@ The following are mandatory properties for the K3 AM65x and J721E SoCs only: the interrupt routes between the IP and the main GIC controllers. See the following binding for additional details, - Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt + Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml Child Nodes: ============ diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt index 58261fb7b408..108bf435b933 100644 --- a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt +++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt @@ -7,6 +7,8 @@ Required properties: Optional properties: - linux,rc-map-name: see rc.txt file in the same directory. + - linux,autosuspend-period: autosuspend delay time, + the unit is milisecond. Example node: @@ -14,4 +16,5 @@ Example node: compatible = "gpio-ir-receiver"; gpios = <&gpio0 19 1>; linux,rc-map-name = "rc-rc6-mce"; + linux,autosuspend-period = <125>; }; diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml index daa2869377c5..63e5b89d2e0b 100644 --- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml +++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml @@ -49,6 +49,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml index 107c862a7fc7..3dc06c628e64 100644 --- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml @@ -119,6 +119,8 @@ required: - reg - port +additionalProperties: false + examples: - | i2c@e66d8000 { diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt deleted file mode 100644 index 0727079d2410..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/imx274.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor - -The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with -an active array size of 3864H x 2202V. It is programmable through I2C -interface. The I2C address is fixed to 0x1a as per sensor data sheet. -Image data is sent through MIPI CSI-2, which is configured as 4 lanes -at 1440 Mbps. - - -Required Properties: -- compatible: value should be "sony,imx274" for imx274 sensor -- reg: I2C bus address of the device - -Optional Properties: -- reset-gpios: Sensor reset GPIO -- clocks: Reference to the input clock. -- clock-names: Should be "inck". -- VANA-supply: Sensor 2.8v analog supply. -- VDIG-supply: Sensor 1.8v digital core supply. -- VDDL-supply: Sensor digital IO 1.2v supply. - -The imx274 device node should contain one 'port' child node with -an 'endpoint' subnode. For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - sensor@1a { - compatible = "sony,imx274"; - reg = <0x1a>; - #address-cells = <1>; - #size-cells = <0>; - reset-gpios = <&gpio_sensor 0 0>; - port { - sensor_out: endpoint { - remote-endpoint = <&csiss_in>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt deleted file mode 100644 index 22e44945b661..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov5647.txt +++ /dev/null @@ -1,35 +0,0 @@ -Omnivision OV5647 raw image sensor ---------------------------------- - -OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces -and CCI (I2C compatible) control bus. - -Required properties: - -- compatible : "ovti,ov5647". -- reg : I2C slave address of the sensor. -- clocks : Reference to the xclk clock. - -The common video interfaces bindings (see video-interfaces.txt) should be -used to specify link to the image data receiver. The OV5647 device -node should contain one 'port' child node with an 'endpoint' subnode. - -Endpoint node mandatory properties: - -- remote-endpoint: A phandle to the bus receiver's endpoint node. - -Example: - - i2c@2000 { - ... - ov: camera@36 { - compatible = "ovti,ov5647"; - reg = <0x36>; - clocks = <&camera_clk>; - port { - camera_1: endpoint { - remote-endpoint = <&csi1_ep1>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml new file mode 100644 index 000000000000..280c62afae13 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ov5647.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV5647 raw image sensor + +maintainers: + - Dave Stevenson <dave.stevenson@raspberrypi.com> + - Jacopo Mondi <jacopo@jmondi.org> + +description: |- + The OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data + interfaces and CCI (I2C compatible) control bus. + +properties: + compatible: + const: ovti,ov5647 + + reg: + description: I2C device address. + maxItems: 1 + + clocks: + description: Reference to the xclk clock. + maxItems: 1 + + pwdn-gpios: + description: Reference to the GPIO connected to the pwdn pin. Active high. + maxItems: 1 + + port: + type: object + description: |- + Should contain one endpoint sub-node used to model connection to the + video receiver according to the specification defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + endpoint: + type: object + + properties: + remote-endpoint: + description: |- + phandle to the video receiver input port. + + clock-noncontinuous: + type: boolean + description: |- + Set to true to allow MIPI CSI-2 non-continuous clock operations. + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov5647: camera@36 { + compatible = "ovti,ov5647"; + reg = <0x36>; + clocks = <&camera_clk>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + + port { + camera_out: endpoint { + remote-endpoint = <&csi1_ep1>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml new file mode 100644 index 000000000000..f697e1a20beb --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor + +maintainers: + - Leon Luo <leonl@leopardimaging.com> + +description: | + The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an + active array size of 3864H x 2202V. It is programmable through I2C interface. + Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440 + Mbps. + +properties: + compatible: + const: sony,imx274 + + reg: + const: 0x1a + + reset-gpios: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: inck + + vana-supply: + description: Sensor 2.8 V analog supply. + maxItems: 1 + + vdig-supply: + description: Sensor 1.8 V digital core supply. + maxItems: 1 + + vddl-supply: + description: Sensor digital IO 1.2 V supply. + maxItems: 1 + + port: + type: object + description: Output video port. See ../video-interfaces.txt. + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + imx274: camera-sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + reset-gpios = <&gpio_sensor 0 0>; + + port { + sensor_out: endpoint { + remote-endpoint = <&csiss_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt index 6c88ce858d08..719b2995dc17 100644 --- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt +++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt @@ -56,7 +56,7 @@ Optional Connector Properties: instead of using the autodetection mechnism. Please look at [1] for more information. -[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt. +[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml. Example - three input sources: #include <dt-bindings/display/sdtv-standards.h> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt new file mode 100644 index 000000000000..736be7cad385 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt @@ -0,0 +1,35 @@ +* MediaTek JPEG Encoder + +MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs + +Required properties: +- compatible : "mediatek,mt2701-jpgenc" + followed by "mediatek,mtk-jpgenc" +- reg : physical base address of the JPEG encoder registers and length of + memory mapped region. +- interrupts : interrupt number to the interrupt controller. +- clocks: device clocks, see + Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- clock-names: must contain "jpgenc". It is the clock of JPEG encoder. +- power-domains: a phandle to the power domain, see + Documentation/devicetree/bindings/power/power_domain.txt for details. +- mediatek,larb: must contain the local arbiters in the current SoCs, see + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + for details. +- iommus: should point to the respective IOMMU block with master port as + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + for details. + +Example: + jpegenc: jpegenc@1500a000 { + compatible = "mediatek,mt2701-jpgenc", + "mediatek,mtk-jpgenc"; + reg = <0 0x1500a000 0 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_VENC>; + clock-names = "jpgenc"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + mediatek,larb = <&larb2>; + iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, + <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt index b6b5dde6abd8..8217424fd4bd 100644 --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt @@ -4,8 +4,9 @@ Mediatek Video Codec is the video codec hw present in Mediatek SoCs which supports high resolution encoding and decoding functionalities. Required properties: -- compatible : "mediatek,mt8173-vcodec-enc" for encoder - "mediatek,mt8173-vcodec-dec" for decoder. +- compatible : "mediatek,mt8173-vcodec-enc" for MT8173 encoder + "mediatek,mt8183-vcodec-enc" for MT8183 encoder. + "mediatek,mt8173-vcodec-dec" for MT8173 decoder. - reg : Physical base address of the video codec registers and length of memory mapped region. - interrupts : interrupt number to the cpu. @@ -19,7 +20,9 @@ Required properties: - iommus : should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details. -- mediatek,vpu : the node of video processor unit +One of the two following nodes: +- mediatek,vpu : the node of the video processor unit, if using VPU. +- mediatek,scp : the node of the SCP unit, if using SCP. Example: diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml index a2d1cd77c1e2..762be3f96ce9 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml @@ -55,6 +55,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/imx8mq-clock.h> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml index f9606df02d70..59ab16ad12f1 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml @@ -92,6 +92,8 @@ required: - video-decoder - video-encoder +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml index fa0dc6c47f1d..199f45217b4a 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml @@ -119,6 +119,8 @@ required: - video-decoder - video-encoder +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml index 55f2d67ae34e..04013e5dd044 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml @@ -25,12 +25,16 @@ properties: maxItems: 1 power-domains: - maxItems: 2 + minItems: 2 + maxItems: 3 power-domain-names: + minItems: 2 + maxItems: 3 items: - const: venus - const: vcodec0 + - const: cx clocks: maxItems: 5 @@ -108,6 +112,8 @@ required: - video-decoder - video-encoder +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml index 157dff8057e9..04b9af4db191 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -25,13 +25,17 @@ properties: maxItems: 1 power-domains: - maxItems: 3 + minItems: 3 + maxItems: 4 power-domain-names: + minItems: 3 + maxItems: 4 items: - const: venus - const: vcodec0 - const: vcodec1 + - const: cx clocks: maxItems: 7 @@ -103,6 +107,8 @@ required: - video-core0 - video-core1 +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml index 084e45e2df62..680f37726fdf 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml @@ -120,6 +120,8 @@ required: - video-core0 - video-core1 +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index ded2ac43237d..8ad2cba5f61f 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -150,3 +150,5 @@ properties: - rc-x96max - rc-xbox-dvd - rc-zx-irdec + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml index 6d282585d0b9..533c2f181db7 100644 --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml @@ -22,6 +22,7 @@ properties: - renesas,r8a774a1-csi2 # RZ/G2M - renesas,r8a774b1-csi2 # RZ/G2N - renesas,r8a774c0-csi2 # RZ/G2E + - renesas,r8a774e1-csi2 # RZ/G2H - renesas,r8a7795-csi2 # R-Car H3 - renesas,r8a7796-csi2 # R-Car M3-W - renesas,r8a77965-csi2 # R-Car M3-N diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index 53c0a7238bac..ad2fe660364b 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -24,6 +24,7 @@ properties: oneOf: - items: - enum: + - renesas,vin-r8a7742 # RZ/G1H - renesas,vin-r8a7743 # RZ/G1M - renesas,vin-r8a7744 # RZ/G1N - renesas,vin-r8a7745 # RZ/G1E @@ -40,6 +41,7 @@ properties: - renesas,vin-r8a774a1 # RZ/G2M - renesas,vin-r8a774b1 # RZ/G2N - renesas,vin-r8a774c0 # RZ/G2E + - renesas,vin-r8a774e1 # RZ/G2H - renesas,vin-r8a7778 # R-Car M1 - renesas,vin-r8a7779 # R-Car H1 - renesas,vin-r8a7795 # R-Car H3 diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index f91b9dc80eb3..20447529c985 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -95,7 +95,7 @@ Optional properties: This node should contain child 'port' nodes specifying active parallel video input ports. It includes camera A and camera B inputs. 'reg' property in the -port nodes specifies data input - 0, 1 indicates input A, B respectively. +port nodes specifies data input - 1, 2 indicates input A, B respectively. Optional properties @@ -172,8 +172,8 @@ Example: /* parallel camera ports */ parallel-ports { /* camera A input */ - port@0 { - reg = <0>; + port@1 { + reg = <1>; fimc0_ep: endpoint { remote-endpoint = <&s5k6aa_ep>; bus-width = <8>; diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml index 68484136a510..71547eee9919 100644 --- a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml @@ -33,6 +33,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/clock/imx6qdl-clock.h> diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml index 7bfe120e14c3..6d6ba608fd22 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml @@ -61,6 +61,8 @@ patternProperties: - cfi-flash - jedec,spi-nor +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/renesas-cpg-mssr.h> diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml index 70eaf739036b..cba74205846a 100644 --- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml @@ -194,6 +194,8 @@ required: - clocks - ranges +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index 5c6eabeed341..d2a6e835c257 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -31,8 +31,8 @@ ab8500-btemp : : vtvout : Battery Temperature : BAT_CTRL_INDB : : Battery Removal Indicator : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C - : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp - : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp + : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and MaxTemp + : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than MaxTemp ab8500-charger : : vddadc : Charger interface : MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505) : MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505) diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt index e6f168db6c72..5ca75d888b4a 100644 --- a/Documentation/devicetree/bindings/mfd/act8945a.txt +++ b/Documentation/devicetree/bindings/mfd/act8945a.txt @@ -71,7 +71,7 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; interrupt-parent = <&pioA>; - interrupts = <45 GPIO_ACTIVE_LOW>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml index 7a616577ac63..c00ad3e21c21 100644 --- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml +++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml @@ -130,6 +130,14 @@ properties: type: object $ref: /schemas/pinctrl/cirrus,lochnagar.yaml# + lochnagar-hwmon: + type: object + $ref: /schemas/hwmon/cirrus,lochnagar.yaml# + + lochnagar-sc: + type: object + $ref: /schemas/sound/cirrus,lochnagar.yaml# + VDDCORE: description: Initialisation data for the VDDCORE regulator, which supplies the @@ -249,7 +257,7 @@ required: - lochnagar-clk - lochnagar-pinctrl -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml new file mode 100644 index 000000000000..074243c40891 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ENE KB3930 Embedded Controller bindings + +description: | + This binding describes the ENE KB3930 Embedded Controller attached to an + I2C bus. + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + compatible: + items: + - enum: + - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020) + - const: ene,kb3930 + reg: + maxItems: 1 + + off-gpios: + description: GPIO used with the shutdown protocol on Ariel + maxItems: 2 + + system-power-controller: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@58 { + compatible = "dell,wyse-ariel-ec", "ene,kb3930"; + reg = <0x58>; + system-power-controller; + + off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>, + <&gpio 127 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml index 9b6eb50606e8..d08e8fe76446 100644 --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -144,9 +144,12 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -155,7 +158,7 @@ examples: compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index 6a7279a85ec1..f49c0d5d31ad 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -30,6 +30,11 @@ properties: For implementations of the EC is connected through RPMSG. const: google,cros-ec-rpmsg + controller-data: + description: + SPI controller data, see bindings/spi/spi-samsung.txt + type: object + google,cros-ec-spi-pre-delay: description: This property specifies the delay in usecs between the @@ -63,6 +68,9 @@ properties: interrupts: maxItems: 1 + wakeup-source: + description: Button can wake-up the system. + required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml new file mode 100644 index 000000000000..eb3b43547cb6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kontron's sl28cpld board management controller + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + The board management controller may contain different IP blocks like + watchdog, fan monitoring, PWM controller, interrupt controller and a + GPIO controller. + +properties: + compatible: + const: kontron,sl28cpld + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + +patternProperties: + "^gpio(@[0-9a-f]+)?$": + $ref: ../gpio/kontron,sl28cpld-gpio.yaml + + "^hwmon(@[0-9a-f]+)?$": + $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml + + "^interrupt-controller(@[0-9a-f]+)?$": + $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml + + "^pwm(@[0-9a-f]+)?$": + $ref: ../pwm/kontron,sl28cpld-pwm.yaml + + "^watchdog(@[0-9a-f]+)?$": + $ref: ../watchdog/kontron,sl28cpld-wdt.yaml + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "a", "b", "c"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + }; + + interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/lp87565.txt b/Documentation/devicetree/bindings/mfd/lp87565.txt deleted file mode 100644 index 41671e0dc26b..000000000000 --- a/Documentation/devicetree/bindings/mfd/lp87565.txt +++ /dev/null @@ -1,79 +0,0 @@ -TI LP87565 PMIC MFD driver - -Required properties: - - compatible: "ti,lp87565", "ti,lp87565-q1" - - reg: I2C slave address. - - gpio-controller: Marks the device node as a GPIO Controller. - - #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../gpio/gpio.txt for more information. - - xxx-in-supply: Phandle to parent supply node of each regulator - populated under regulators node. xxx should match - the supply_name populated in driver. -Example: - -lp87565_pmic: pmic@60 { - compatible = "ti,lp87565-q1"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - - buck10-in-supply = <&vsys_3v3>; - buck23-in-supply = <&vsys_3v3>; - - regulators: regulators { - buck10_reg: buck10 { - /* VDD_MPU */ - regulator-name = "buck10"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - buck23_reg: buck23 { - /* VDD_GPU */ - regulator-name = "buck23"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-boot-on; - regulator-always-on; - }; - }; -}; - -TI LP87561 PMIC: - -This is a single output 4-phase regulator configuration - -Required properties: - - compatible: "ti,lp87561-q1" - - reg: I2C slave address. - - gpio-controller: Marks the device node as a GPIO Controller. - - #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../gpio/gpio.txt for more information. - - xxx-in-supply: Phandle to parent supply node of each regulator - populated under regulators node. xxx should match - the supply_name populated in driver. -Example: - -lp87561_pmic: pmic@62 { - compatible = "ti,lp87561-q1"; - reg = <0x62>; - gpio-controller; - #gpio-cells = <2>; - - buck3210-in-supply = <&vsys_3v3>; - - regulators: regulators { - buck3210_reg: buck3210 { - /* VDD_CORE */ - regulator-name = "buck3210"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-always-on; - regulator-boot-on; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt index fffc8fde3302..79367a43b27d 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt @@ -37,7 +37,7 @@ Required properties: or generalized "qcom,spmi-pmic". - reg: Specifies the SPMI USID slave address for this device. For more information see: - Documentation/devicetree/bindings/spmi/spmi.txt + Documentation/devicetree/bindings/spmi/spmi.yaml Required properties for peripheral child nodes: - compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name. diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt index c3c02ce73cde..386eec06cf08 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt +++ b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt @@ -39,7 +39,7 @@ pmic: pmic@4b { compatible = "rohm,bd70528"; reg = <0x4b>; interrupt-parent = <&gpio1>; - interrupts = <29 GPIO_ACTIVE_LOW>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; clocks = <&osc 0>; #clock-cells = <0>; clock-output-names = "bd70528-32k-out"; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml index 77bcca2d414f..5d531051a153 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml @@ -38,6 +38,9 @@ properties: "#clock-cells": const: 0 + clock-output-names: + maxItems: 1 + # The BD71847 abd BD71850 support two different HW states as reset target # states. States are called as SNVS and READY. At READY state all the PMIC # power outputs go down and OTP is reload. At the SNVS state all other logic @@ -116,12 +119,14 @@ required: - compatible - reg - interrupts - - clocks - - "#clock-cells" - regulators additionalProperties: false +dependencies: + '#clock-cells': [clocks] + clocks: ['#clock-cells'] + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 049ec2ffc7f9..8f4764a9ed45 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -38,8 +38,16 @@ properties: - allwinner,sun8i-h3-system-controller - allwinner,sun8i-v3s-system-controller - allwinner,sun50i-a64-system-controller + - hisilicon,dsa-subctrl + - hisilicon,hi6220-sramctrl + - hisilicon,pcie-sas-subctrl + - hisilicon,peri-subctrl - microchip,sparx5-cpu-syscon - mstar,msc313-pmsleep + - samsung,exynos3-sysreg + - samsung,exynos4-sysreg + - samsung,exynos5-sysreg + - samsung,exynos5433-sysreg - const: syscon @@ -67,7 +75,7 @@ required: - compatible - reg -unevaluatedProperties: false +additionalProperties: true examples: - | diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml index c8fd5d3e3071..19fcf59fd2fe 100644 --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -30,6 +30,9 @@ properties: - const: syscon - const: simple-mfd + reg: + maxItems: 1 + "#address-cells": const: 1 @@ -38,8 +41,8 @@ properties: ranges: true -# Optional children - +patternProperties: + # Optional children "^serdes-ln-ctrl@[0-9a-f]+$": type: object description: | @@ -54,7 +57,7 @@ required: - "#size-cells" - ranges -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml new file mode 100644 index 000000000000..c4fc5345d38d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,lp87524-q1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LP87524-Q1 four 1-phase output buck converter + +maintainers: + - Keerthy <j-keerthy@ti.com> + +properties: + compatible: + const: ti,lp87524-q1 + + reg: + description: I2C slave address + const: 0x60 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. + The second cell is is used to specify flags. + See ../gpio/gpio.txt for more information. + const: 2 + + regulators: + type: object + + patternProperties: + "^buck[0123]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + required: + - buck0 + - buck1 + - buck2 + - buck3 + + additionalProperties: false + +patternProperties: + "^buck[0123]-in-supply$": + description: Voltage regulator supply for each BUCK converter + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - buck0-in-supply + - buck1-in-supply + - buck2-in-supply + - buck3-in-supply + - regulators + +additionalProperties: false + +examples: + - | + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@60 { + compatible = "ti,lp87524-q1"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck0-in-supply = <&vdd_5v0>; + buck1-in-supply = <&vdd_5v0>; + buck2-in-supply = <&vdd_5v0>; + buck3-in-supply = <&vdd_5v0>; + + regulators { + buck0_reg: buck0 { + regulator-name = "buck0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck1_reg: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml new file mode 100644 index 000000000000..a7e57c0913e1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,lp87561-q1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LP87561-Q1 single 4-phase output buck converter + +maintainers: + - Keerthy <j-keerthy@ti.com> + +properties: + compatible: + const: ti,lp87561-q1 + + reg: + description: I2C slave address + const: 0x60 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. + The second cell is is used to specify flags. + See ../gpio/gpio.txt for more information. + const: 2 + + buck3210-in-supply: + description: + Voltage regulator supply for all the four BUCK converters. + + regulators: + type: object + + properties: + buck3210: + type: object + $ref: /schemas/regulator/regulator.yaml# + + required: + - buck3210 + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - buck3210-in-supply + +additionalProperties: false + +examples: + - | + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@60 { + compatible = "ti,lp87561-q1"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck3210-in-supply = <&vsys_3v3>; + + regulators { + buck3210_reg: buck3210 { + /* VDD_CORE */ + regulator-name = "buck3210"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml new file mode 100644 index 000000000000..1da6d6a958c9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,lp87565-q1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LP87565-Q1 / LP87565 dual 2-phase output buck converter + +maintainers: + - Keerthy <j-keerthy@ti.com> + +properties: + compatible: + oneOf: + - const: ti,lp87565 + - const: ti,lp87565-q1 + + reg: + description: I2C slave address + const: 0x60 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. + The second cell is is used to specify flags. + See ../gpio/gpio.txt for more information. + const: 2 + + buck10-in-supply: + description: + Voltage regulator supply for BUCK0 and BUCK1 converters. + + buck23-in-supply: + description: + Voltage regulator supply for BUCK2 and BUCK3 converters. + + regulators: + type: object + + patternProperties: + "^buck(10|23)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + required: + - buck10 + - buck23 + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - buck10-in-supply + - buck23-in-supply + +additionalProperties: false + +examples: + - | + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@60 { + compatible = "ti,lp87565-q1"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck10-in-supply = <&vsys_3v3>; + buck23-in-supply = <&vsys_3v3>; + + regulators { + buck10_reg: buck10 { + /* VDD_MPU */ + regulator-name = "buck10"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + buck23_reg: buck23 { + /* VDD_GPU */ + regulator-name = "buck23"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml index abc9937506e0..8a1a6625c782 100644 --- a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml +++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml @@ -26,6 +26,12 @@ properties: reg: maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + select: properties: compatible: @@ -36,15 +42,19 @@ select: required: - compatible +patternProperties: + "^gpio@[0-9a-f]+$": + $ref: /schemas/gpio/xylon,logicvc-gpio.yaml# + required: - compatible - reg +additionalProperties: false + examples: - | logicvc: logicvc@43c00000 { compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; reg = <0x43c00000 0x6000>; - #address-cells = <1>; - #size-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml index 83c86cbe4716..dc21b4630c25 100644 --- a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml +++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml @@ -47,4 +47,9 @@ properties: items: - const: yna,cu1830-neo - const: ingenic,x1830 + + - description: YSH & ATIL General Board, CU2000 Module with Neo Backplane + items: + - const: yna,cu2000-neo + - const: ingenic,x2000e ... diff --git a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml index 16fa03d65ad5..6df1a9470d8f 100644 --- a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml +++ b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml @@ -32,12 +32,16 @@ properties: clocks: maxItems: 1 + device_type: true + required: - device_type - compatible - reg - clocks +additionalProperties: false + examples: - | #include <dt-bindings/clock/jz4780-cgu.h> @@ -52,7 +56,6 @@ examples: reg = <0>; clocks = <&cgu JZ4780_CLK_CPU>; - clock-names = "cpu"; }; cpu1: cpu@1 { @@ -61,7 +64,6 @@ examples: reg = <1>; clocks = <&cgu JZ4780_CLK_CORE1>; - clock-names = "cpu"; }; }; ... diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml index d317897e1115..7c0f9022202c 100644 --- a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml +++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml @@ -23,6 +23,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | isa@0 { diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml index e75d77beec6a..b3c45c046ba5 100644 --- a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml +++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml @@ -28,11 +28,13 @@ properties: description: GPIO uspecifier of the CMD pin maxItems: 1 + spi-cpha: true + required: - compatible - cmd-gpios -unevaluatedProperties: false +additionalProperties: false examples: - | @@ -40,6 +42,8 @@ examples: spi { spi-slave; + #address-cells = <0>; + #size-cells = <0>; ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>; slave { diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml index 0cd74c3116f8..60955acb8e57 100644 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml @@ -50,6 +50,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml index 5887c917d480..58fe9d02a781 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml @@ -30,9 +30,13 @@ allOf: then: properties: clock-output-names: - items: - - const: clk_out_sd0 - - const: clk_in_sd0 + oneOf: + - items: + - const: clk_out_sd0 + - const: clk_in_sd0 + - items: + - const: clk_out_sd1 + - const: clk_in_sd1 properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index d93f7794a85f..af7442f73881 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -117,6 +117,8 @@ required: - interrupts - clocks +unevaluatedProperties: false + examples: - | emmc: mmc@5a000000 { diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 10b45966f1b8..e71d13c2d109 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -21,23 +21,26 @@ description: | properties: compatible: - enum: - - fsl,imx25-esdhc - - fsl,imx35-esdhc - - fsl,imx51-esdhc - - fsl,imx53-esdhc - - fsl,imx6q-usdhc - - fsl,imx6sl-usdhc - - fsl,imx6sx-usdhc - - fsl,imx6ull-usdhc - - fsl,imx7d-usdhc - - fsl,imx7ulp-usdhc - - fsl,imx8mq-usdhc - - fsl,imx8mm-usdhc - - fsl,imx8mn-usdhc - - fsl,imx8mp-usdhc - - fsl,imx8qm-usdhc - - fsl,imx8qxp-usdhc + oneOf: + - enum: + - fsl,imx25-esdhc + - fsl,imx35-esdhc + - fsl,imx51-esdhc + - fsl,imx53-esdhc + - fsl,imx6q-usdhc + - fsl,imx6sl-usdhc + - fsl,imx6sx-usdhc + - fsl,imx6ull-usdhc + - fsl,imx7d-usdhc + - fsl,imx7ulp-usdhc + - items: + - enum: + - fsl,imx8mm-usdhc + - fsl,imx8mn-usdhc + - fsl,imx8mp-usdhc + - fsl,imx8mq-usdhc + - fsl,imx8qxp-usdhc + - const: fsl,imx7d-usdhc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml index 9b63df1c22fb..04ba8b7fc054 100644 --- a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml @@ -56,6 +56,8 @@ required: - dmas - dma-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/jz4780-cgu.h> diff --git a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml new file mode 100644 index 000000000000..55883290543b --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/microchip,dw-sparx5-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Sparx5 Mobile Storage Host Controller Binding + +allOf: + - $ref: "mmc-controller.yaml" + +maintainers: + - Lars Povlsen <lars.povlsen@microchip.com> + +# Everything else is described in the common file +properties: + compatible: + const: microchip,dw-sparx5-sdhci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Handle to "core" clock for the sdhci controller. + + clock-names: + items: + - const: core + + microchip,clock-delay: + description: Delay clock to card to meet setup time requirements. + Each step increase by 1.25ns. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1 + maximum: 15 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/microchip,sparx5.h> + sdhci0: mmc@600800000 { + compatible = "microchip,dw-sparx5-sdhci"; + reg = <0x00800000 0x1000>; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + clocks = <&clks CLK_ID_AUX1>; + clock-names = "core"; + assigned-clocks = <&clks CLK_ID_AUX1>; + assigned-clock-rates = <800000000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + microchip,clock-delay = <10>; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index b96da0c7f819..186f04ba9357 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -14,6 +14,10 @@ description: | that requires the respective functionality should implement them using these definitions. + It is possible to assign a fixed index mmcN to an MMC host controller + (and the corresponding mmcblkN devices) by defining an alias in the + /aliases device tree node. + properties: $nodename: pattern: "^mmc(@.*)?$" @@ -349,6 +353,8 @@ dependencies: cd-debounce-delay-ms: [ cd-gpios ] fixed-emmc-driver-type: [ non-removable ] +additionalProperties: true + examples: - | mmc@ab000000 { diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml index 77f746f57284..1fc7e620f328 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml @@ -36,6 +36,8 @@ required: - compatible - reset-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml index a68820d31d50..e0169a285aa2 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml @@ -28,6 +28,8 @@ required: - powerdown-gpios - reset-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml index 449215444723..6cd57863c1db 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml @@ -20,6 +20,8 @@ properties: reset-gpios: minItems: 1 + # Put some limit to avoid false warnings + maxItems: 32 description: contains a list of GPIO specifiers. The reset GPIOs are asserted at initialization and prior we start the power up procedure of the card. @@ -50,6 +52,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt index 0c9cf6a8808c..26a8f320a156 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -50,6 +50,8 @@ Optional properties: error caused by stop clock(fifo full) Valid range = [0:0x7]. if not present, default value is 0. applied to compatible "mediatek,mt2701-mmc". +- resets: Phandle and reset specifier pair to softreset line of MSDC IP. +- reset-names: Should be "hrst". Examples: mmc0: mmc@11230000 { diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index 2cf3affa1be7..96c0b1440c9c 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -15,8 +15,15 @@ Required properties: - "nvidia,tegra210-sdhci": for Tegra210 - "nvidia,tegra186-sdhci": for Tegra186 - "nvidia,tegra194-sdhci": for Tegra194 -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. +- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries. + One for the module clock and one for the timeout clock. + For all other Tegra devices, must contain a single entry for + the module clock. See ../clocks/clock-bindings.txt for details. +- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the + strings 'sdhci' and 'tmclk' to represent the module and + the timeout clocks, respectively. + For all other Tegra devices must contain the string 'sdhci' + to represent the module clock. - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names : Must include the following entries: @@ -99,7 +106,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194: Example: sdhci@700b0000 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC1>; @@ -115,3 +122,22 @@ sdhci@700b0000 { nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; status = "disabled"; }; + +sdhci@700b0000 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0000 0x0 0x200>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC1>, + <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>; + clock-names = "sdhci", "tmclk"; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml index 1380501fb8f0..b6ab527087d5 100644 --- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml @@ -14,7 +14,11 @@ maintainers: properties: compatible: - const: actions,owl-mmc + oneOf: + - const: actions,owl-mmc + - items: + - const: actions,s700-mmc + - const: actions,owl-mmc reg: maxItems: 1 @@ -43,6 +47,8 @@ required: - dmas - dma-names +unevaluatedProperties: false + examples: - | mmc0: mmc@e0330000 { diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index b4c3fd40caeb..6bbf29b5c239 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -50,6 +50,7 @@ properties: - renesas,sdhi-r8a774a1 # RZ/G2M - renesas,sdhi-r8a774b1 # RZ/G2N - renesas,sdhi-r8a774c0 # RZ/G2E + - renesas,sdhi-r8a774e1 # RZ/G2H - renesas,sdhi-r8a7795 # R-Car H3 - renesas,sdhi-r8a7796 # R-Car M3-W - renesas,sdhi-r8a77961 # R-Car M3-W+ diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index 01316185e771..3762f1c8de96 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -102,6 +102,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/rk3288-cru.h> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt deleted file mode 100644 index 6d202f4d9249..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt +++ /dev/null @@ -1,61 +0,0 @@ -Device Tree Bindings for the SDHCI Controllers present on TI's AM654 SOCs - -The bindings follow the mmc[1], clock[2] and interrupt[3] bindings. -Only deviations are documented here. - - [1] Documentation/devicetree/bindings/mmc/mmc.txt - [2] Documentation/devicetree/bindings/clock/clock-bindings.txt - [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Required Properties: - - compatible: should be one of: - "ti,am654-sdhci-5.1": SDHCI on AM654 device. - "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device. - "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device. - - reg: Must be two entries. - - The first should be the sdhci register space - - The second should the subsystem/phy register space - - clocks: Handles to the clock inputs. - - clock-names: Tuple including "clk_xin" and "clk_ahb" - - interrupts: Interrupt specifiers - Output tap delay for each speed mode: - - ti,otap-del-sel-legacy - - ti,otap-del-sel-mmc-hs - - ti,otap-del-sel-sd-hs - - ti,otap-del-sel-sdr12 - - ti,otap-del-sel-sdr25 - - ti,otap-del-sel-sdr50 - - ti,otap-del-sel-sdr104 - - ti,otap-del-sel-ddr50 - - ti,otap-del-sel-ddr52 - - ti,otap-del-sel-hs200 - - ti,otap-del-sel-hs400 - These bindings must be provided otherwise the driver will disable the - corresponding speed mode (i.e. all nodes must provide at least -legacy) - -Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit): - - ti,trm-icp: DLL trim select - - ti,driver-strength-ohm: driver strength in ohms. - Valid values are 33, 40, 50, 66 and 100 ohms. -Optional Properties: - - ti,strobe-sel: strobe select delay for HS400 speed mode. Default value: 0x0. - - ti,clkbuf-sel: Clock Delay Buffer Select - -Example: - - sdhci0: sdhci@4f80000 { - compatible = "ti,am654-sdhci-5.1"; - reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; - power-domains = <&k3_pds 47>; - clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; - clock-names = "clk_ahb", "clk_xin"; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - sdhci-caps-mask = <0x80000007 0x0>; - mmc-ddr-1_8v; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-mmc-hs = <0x0>; - ti,otap-del-sel-ddr52 = <0x5>; - ti,otap-del-sel-hs200 = <0x5>; - ti,otap-del-sel-hs400 = <0x0>; - ti,trm-icp = <0x8>; - }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml new file mode 100644 index 000000000000..ac79f3adf20b --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml @@ -0,0 +1,218 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#" +$schema : "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI AM654 MMC Controller + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +allOf: + - $ref: mmc-controller.yaml# + +properties: + compatible: + enum: + - ti,am654-sdhci-5.1 + - ti,j721e-sdhci-8bit + - ti,j721e-sdhci-4bit + - ti,j7200-sdhci-8bit + - ti,j721e-sdhci-4bit + + reg: + maxItems: 2 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + description: Handles to input clocks + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: clk_ahb + - const: clk_xin + + # PHY output tap delays: + # Used to delay the data valid window and align it to the sampling clock. + # Binding needs to be provided for each supported speed mode otherwise the + # corresponding mode will be disabled. + + ti,otap-del-sel-legacy: + description: Output tap delay for SD/MMC legacy timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + ti,otap-del-sel-mmc-hs: + description: Output tap delay for MMC high speed timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + ti,otap-del-sel-sd-hs: + description: Output tap delay for SD high speed timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + ti,otap-del-sel-sdr12: + description: Output tap delay for SD UHS SDR12 timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + ti,otap-del-sel-sdr25: + description: Output tap delay for SD UHS SDR25 timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + ti,otap-del-sel-sdr50: + description: Output tap delay for SD UHS SDR50 timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + ti,otap-del-sel-sdr104: + description: Output tap delay for SD UHS SDR104 timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + ti,otap-del-sel-ddr50: + description: Output tap delay for SD UHS DDR50 timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + ti,otap-del-sel-ddr52: + description: Output tap delay for eMMC DDR52 timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + ti,otap-del-sel-hs200: + description: Output tap delay for eMMC HS200 timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + ti,otap-del-sel-hs400: + description: Output tap delay for eMMC HS400 timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + # PHY input tap delays: + # Used to delay the data valid window and align it to the sampling clock for + # modes that don't support tuning + + ti,itap-del-sel-legacy: + description: Input tap delay for SD/MMC legacy timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f + + ti,itap-del-sel-mmc-hs: + description: Input tap delay for MMC high speed timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f + + ti,itap-del-sel-sd-hs: + description: Input tap delay for SD high speed timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f + + ti,itap-del-sel-sdr12: + description: Input tap delay for SD UHS SDR12 timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f + + ti,itap-del-sel-sdr25: + description: Input tap delay for SD UHS SDR25 timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f + + ti,itap-del-sel-ddr52: + description: Input tap delay for MMC DDR52 timing + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f + + ti,trm-icp: + description: DLL trim select + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0xf + + ti,driver-strength-ohm: + description: DLL drive strength in ohms + $ref: "/schemas/types.yaml#/definitions/uint32" + oneOf: + - enum: + - 33 + - 40 + - 50 + - 66 + - 100 + + ti,strobe-sel: + description: strobe select delay for HS400 speed mode. + $ref: "/schemas/types.yaml#/definitions/uint32" + + ti,clkbuf-sel: + description: Clock Delay Buffer Select + $ref: "/schemas/types.yaml#/definitions/uint32" + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - ti,otap-del-sel-legacy + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + mmc0: mmc@4f80000 { + compatible = "ti,am654-sdhci-5.1"; + reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; + power-domains = <&k3_pds 47>; + clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; + clock-names = "clk_ahb", "clk_xin"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + sdhci-caps-mask = <0x80000007 0x0>; + mmc-ddr-1_8v; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-ddr52 = <0x5>; + ti,otap-del-sel-hs200 = <0x5>; + ti,otap-del-sel-hs400 = <0x0>; + ti,itap-del-sel-legacy = <0x10>; + ti,itap-del-sel-mmc-hs = <0xa>; + ti,itap-del-sel-ddr52 = <0x3>; + ti,trm-icp = <0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml index a58715c860b7..aa12480648a5 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml @@ -73,6 +73,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/berlin2.h> diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml index 8d6413f48823..56f9ff12742d 100644 --- a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml @@ -77,6 +77,8 @@ required: - reset-names - resets +unevaluatedProperties: false + examples: - | sd: mmc@5a400000 { diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml index 85bd528e9a14..8dfad89c78a7 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml @@ -62,3 +62,5 @@ properties: dma-names: const: rx-tx + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml index dd2c1b147142..240abb6f102c 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml @@ -42,6 +42,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: - | mmc@12200000 { diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml index c07b91592cbd..1307ed7e7fc6 100644 --- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml @@ -128,6 +128,8 @@ required: - clock-names - clocks +unevaluatedProperties: false + examples: - | nand-controller@ff900000 { diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml index 3201372b7f85..28ff8c581837 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml @@ -20,12 +20,18 @@ description: | properties: compatible: - enum: - - fsl,imx23-gpmi-nand - - fsl,imx28-gpmi-nand - - fsl,imx6q-gpmi-nand - - fsl,imx6sx-gpmi-nand - - fsl,imx7d-gpmi-nand + oneOf: + - enum: + - fsl,imx23-gpmi-nand + - fsl,imx28-gpmi-nand + - fsl,imx6q-gpmi-nand + - fsl,imx6sx-gpmi-nand + - fsl,imx7d-gpmi-nand + - items: + - enum: + - fsl,imx8mm-gpmi-nand + - fsl,imx8mn-gpmi-nand + - const: fsl,imx7d-gpmi-nand reg: items: diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml index 8abb6d463cb6..89aa3ceda592 100644 --- a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml @@ -51,6 +51,8 @@ required: - compatible - reg +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/jz4780-cgu.h> diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index 40fc5b0b2b8c..b29050fd7470 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -55,6 +55,37 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/string enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die] + nand-ecc-engine: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle on the hardware ECC engine if any. There are + basically three possibilities: + 1/ The ECC engine is part of the NAND controller, in this + case the phandle should reference the parent node. + 2/ The ECC engine is part of the NAND part (on-die), in this + case the phandle should reference the node itself. + 3/ The ECC engine is external, in this case the phandle should + reference the specific ECC engine node. + + nand-use-soft-ecc-engine: + type: boolean + description: Use a software ECC engine. + + nand-no-ecc-engine: + type: boolean + description: Do not use any ECC correction. + + nand-ecc-placement: + allOf: + - $ref: /schemas/types.yaml#/definitions/string + - enum: [ oob, interleaved ] + description: + Location of the ECC bytes. This location is unknown by default + but can be explicitly set to "oob", if all ECC bytes are + known to be stored in the OOB area, or "interleaved" if ECC + bytes will be interleaved with regular data in the main area. + nand-ecc-algo: description: Desired ECC algorithm. @@ -128,6 +159,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: true + examples: - | nand-controller { diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml index 28a08ff407db..29c5ef24ac6a 100644 --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml @@ -94,6 +94,8 @@ required: - reg - interrupts +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml index d95cc691a65f..1129f2b58e98 100644 --- a/Documentation/devicetree/bindings/net/adi,adin.yaml +++ b/Documentation/devicetree/bindings/net/adi,adin.yaml @@ -36,6 +36,8 @@ properties: enum: [ 4, 8, 12, 16, 20, 24 ] default: 8 +unevaluatedProperties: false + examples: - | ethernet { diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index 85fefe3a0444..6b057b117aa0 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -120,6 +120,8 @@ required: - clock-names - phy-mode +unevaluatedProperties: false + examples: - | ethmac: ethernet@c9410000 { diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml index 71808e78a495..1c88820cbcdf 100644 --- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml +++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml @@ -30,6 +30,8 @@ required: - "#address-cells" - "#size-cells" +unevaluatedProperties: false + examples: - | mdio0: mdio@1e650000 { diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index 88b57b0ca1f4..97ca62b0e14d 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -50,6 +50,13 @@ Optional properties: - reset-names: If the "reset" property is specified, this property should have the value "switch" to denote the switch reset line. +- clocks: when provided, the first phandle is to the switch's main clock and + is valid for both BCM7445 and BCM7278. The second phandle is only applicable + to BCM7445 and is to support dividing the switch core clock. + +- clock-names: when provided, the first phandle must be "sw_switch", and the + second must be named "sw_switch_mdiv". + Port subnodes: Optional properties: diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt index 83f29e0e11ba..75736739bfdd 100644 --- a/Documentation/devicetree/bindings/net/brcm,systemport.txt +++ b/Documentation/devicetree/bindings/net/brcm,systemport.txt @@ -20,6 +20,11 @@ Optional properties: - systemport,num-tier1-arb: number of tier 1 arbiters, an integer - systemport,num-txq: number of HW transmit queues, an integer - systemport,num-rxq: number of HW receive queues, an integer +- clocks: When provided, must be two phandles to the functional clocks nodes of + the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used + during normal operation, while the second phandle is the Wake-on-LAN clock. +- clock-names: When provided, names of the functional clock phandles, first + name should be "sw_sysport" and second should be "sw_sysportwol". Example: ethernet@f04a0000 { diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml index 6396977d29e5..d1ef1fe6ab29 100644 --- a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml +++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml @@ -16,3 +16,5 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run. minimum: 1 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index 94c0f8bf4deb..e10b6eb955e1 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -4,6 +4,12 @@ Required properties: - compatible : Should be "fsl,<processor>-flexcan" + where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010, + vf610, ls1021ar2, lx2160ar1, ls1028ar1. + + The ls1028ar1 must be followed by lx2160ar1, e.g. + - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan" + An implementation should also claim any of the following compatibles that it is fully backwards compatible with: @@ -25,12 +31,10 @@ Optional properties: endian. - fsl,stop-mode: register bits of stop mode control, the format is - <&gpr req_gpr req_bit ack_gpr ack_bit>. + <&gpr req_gpr req_bit>. gpr is the phandle to general purpose register node. req_gpr is the gpr register offset of CAN stop request. req_bit is the bit offset of CAN stop request. - ack_gpr is the gpr register offset of CAN stop acknowledge. - ack_bit is the bit offset of CAN stop acknowledge. - fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE). It's SoC Implementation dependent. Refer to RM for detailed diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt index 5a0111d4de58..381f8fb3e865 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt @@ -12,6 +12,9 @@ Required properties: Optional properties: - vdd-supply: Regulator that powers the CAN controller. - xceiver-supply: Regulator that powers the CAN transceiver. + - gpio-controller: Indicates this device is a GPIO controller. + - #gpio-cells: Should be two. The first cell is the pin number and + the second cell is used to specify the gpio polarity. Example: can0: can@1 { @@ -19,7 +22,9 @@ Example: reg = <1>; clocks = <&clk24m>; interrupt-parent = <&gpio4>; - interrupts = <13 0x2>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <®5v0>; xceiver-supply = <®5v0>; + gpio-controller; + #gpio-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml new file mode 100644 index 000000000000..2a884c1fe0e0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree + bindings + +maintainers: + - Marc Kleine-Budde <mkl@pengutronix.de> + +properties: + compatible: + oneOf: + - const: microchip,mcp2517fd + description: for MCP2517FD + - const: microchip,mcp2518fd + description: for MCP2518FD + - const: microchip,mcp251xfd + description: to autodetect chip variant + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + vdd-supply: + description: Regulator that powers the CAN controller. + + xceiver-supply: + description: Regulator that powers the CAN transceiver. + + microchip,rx-int-gpios: + description: + GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which + signals a pending RX interrupt. + maxItems: 1 + + spi-max-frequency: + description: + Must be half or less of "clocks" frequency. + maximum: 20000000 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + can@0 { + compatible = "microchip,mcp251xfd"; + reg = <0>; + clocks = <&can0_osc>; + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins>; + spi-max-frequency = <20000000>; + interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>; + microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + vdd-supply = <®5v0>; + xceiver-supply = <®5v0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index 85c6551b602a..6a5956347816 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -2,13 +2,15 @@ Renesas R-Car CAN controller Device Tree Bindings ------------------------------------------------- Required properties: -- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. +- compatible: "renesas,can-r8a7742" if CAN controller is a part of R8A7742 SoC. + "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC. "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC. "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC. "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC. + "renesas,can-r8a774e1" if CAN controller is a part of R8A774E1 SoC. "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. @@ -37,8 +39,8 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". -Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796, -R8A77965, R8A77990, and R8A77995: +Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795, +R8A7796, R8A77965, R8A77990, and R8A77995: For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can be used by both CAN and CAN FD controller at the same time. It needs to be scaled to maximum frequency if any of these controllers use it. This is done diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt index 13a4e34c0c73..22cf2a889b2c 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt @@ -7,6 +7,7 @@ Required properties: - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller. - "renesas,r8a774b1-canfd" for R8A774B1 (RZ/G2N) compatible controller. - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller. + - "renesas,r8a774e1-canfd" for R8A774E1 (RZ/G2H) compatible controller. - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller. - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller. - "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller. @@ -32,8 +33,8 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each child node supports the "status" property only, which is used to enable/disable the respective channel. -Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796, -R8A77965, R8A77990, and R8A77995: +Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795, +R8A7796, R8A77965, R8A77990, and R8A77995: In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN and CAN FD controller at the same time. It needs to be scaled to maximum frequency if any of these controllers use it. This is done using the below diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt index cfd1afdc6e94..f1487a751b1a 100644 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt @@ -95,7 +95,7 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0: fixed-link { speed = <1000>; - duplex-full; + full-duplex; }; }; @@ -104,8 +104,9 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0: #address-cells = <1>; #size-cells = <0>; - switch0: ethernet-switch@30 { + switch0: ethernet-switch@1e { compatible = "brcm,bcm53125"; + reg = <30>; #address-cells = <1>; #size-cells = <0>; @@ -128,7 +129,7 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0: label = "cable-modem"; fixed-link { speed = <1000>; - duplex-full; + full-duplex; }; phy-mode = "rgmii-txid"; }; @@ -138,7 +139,7 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0: label = "cpu"; fixed-link { speed = <1000>; - duplex-full; + full-duplex; }; phy-mode = "rgmii-txid"; ethernet = <ð0>; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index bf7328aba330..dab208b5c7c7 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -1,4 +1,4 @@ Distributed Switch Architecture Device Tree Bindings ---------------------------------------------------- -See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documenation. +See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation. diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 6a1ec50ad4fd..a765ceba28c6 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -89,4 +89,6 @@ oneOf: - required: - ethernet-ports +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index c5ed5d25f642..560369efad6c 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -5,6 +5,7 @@ Required properties: - compatible: may be compatible = "mediatek,mt7530" or compatible = "mediatek,mt7621" + or compatible = "mediatek,mt7531" - #address-cells: Must be 1. - #size-cells: Must be 0. - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part @@ -32,10 +33,14 @@ Required properties for the child nodes within ports container: - reg: Port address described must be 6 for CPU port and from 0 to 5 for user ports. -- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled - "cpu". - -Port 5 of the switch is muxed between: +- phy-mode: String, the following values are acceptable for port labeled + "cpu": + If compatible mediatek,mt7530 or mediatek,mt7621 is set, + must be either "trgmii" or "rgmii" + If compatible mediatek,mt7531 is set, + must be either "sgmii", "1000base-x" or "2500base-x" + +Port 5 of mt7530 and mt7621 switch is muxed between: 1. GMAC5: GMAC5 can interface with another external MAC or PHY. 2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC of the SOC. Used in many setups where port 0/4 becomes the WAN port. diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index fa2baca8c726..fdf709817218 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -120,6 +120,13 @@ properties: and is useful for determining certain configuration settings such as flow control thresholds. + rx-internal-delay-ps: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + RGMII Receive Clock Delay defined in pico seconds. + This is used for controllers that have configurable RX internal delays. + If this property is present then the MAC applies the RX delay. + sfp: $ref: /schemas/types.yaml#definitions/phandle description: @@ -131,6 +138,13 @@ properties: The size of the controller\'s transmit fifo in bytes. This is used for components that can have configurable fifo sizes. + tx-internal-delay-ps: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + RGMII Transmit Clock Delay defined in pico seconds. + This is used for controllers that have configurable TX internal delays. + If this property is present then the MAC applies the TX delay. + managed: description: Specifies the PHY management type. If auto is set and fixed-link @@ -205,4 +219,6 @@ properties: required: - speed +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index a9e547ac7905..6dd72faebd89 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -177,6 +177,8 @@ properties: required: - reg +additionalProperties: true + examples: - | ethernet { diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml new file mode 100644 index 000000000000..fa3ebba4e635 --- /dev/null +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/intel,dwmac-plat.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel DWMAC glue layer Device Tree Bindings + +maintainers: + - Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> + +select: + properties: + compatible: + contains: + enum: + - intel,keembay-dwmac + required: + - compatible + +allOf: + - $ref: "snps,dwmac.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - intel,keembay-dwmac + - const: snps,dwmac-4.10a + + clocks: + items: + - description: GMAC main clock + - description: PTP reference clock + - description: Tx clock + + clock-names: + items: + - const: stmmaceth + - const: ptp_ref + - const: tx_clk + +required: + - compatible + - clocks + - clock-names + +examples: +# FIXME: Remove defines and include the correct header file +# once it is available in mainline. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #define MOVISOC_KMB_PSS_GBE + #define MOVISOC_KMB_PSS_AUX_GBE_PTP + #define MOVISOC_KMB_PSS_AUX_GBE_TX + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0x0>; + snps,rd_osr_lmt = <0x2>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <2>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,priority = <0x0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + + queue1 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + }; + + gmac0: ethernet@3a000000 { + compatible = "intel,keembay-dwmac", "snps,dwmac-4.10a"; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + reg = <0x3a000000 0x8000>; + snps,perfect-filter-entries = <128>; + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + clock-names = "stmmaceth", "ptp_ref", "tx_clk"; + clocks = <&scmi_clk MOVISOC_KMB_PSS_GBE>, + <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_PTP>, + <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_TX>; + snps,pbl = <0x4>; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,tso; + status = "okay"; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + ethernet-phy@0 { + reg = <0>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml index 68573762294b..8e288ab38fd7 100644 --- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml +++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml @@ -35,6 +35,8 @@ required: - "#address-cells" - "#size-cells" +unevaluatedProperties: false + examples: - | /* USB host controller */ diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt index 83370ebf5b89..e28938ddfdf5 100644 --- a/Documentation/devicetree/bindings/net/marvell,prestera.txt +++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt @@ -45,3 +45,37 @@ dfx-server { ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; reg = <MBUS_ID(0x08, 0x00) 0 0x100000>; }; + +Marvell Prestera SwitchDev bindings +----------------------------------- +Optional properties: +- compatible: must be "marvell,prestera" +- base-mac-provider: describes handle to node which provides base mac address, + might be a static base mac address or nvme cell provider. + +Example: + +eeprom_mac_addr: eeprom-mac-addr { + compatible = "eeprom,mac-addr-cell"; + status = "okay"; + + nvmem = <&eeprom_at24>; +}; + +prestera { + compatible = "marvell,prestera"; + status = "okay"; + + base-mac-provider = <&eeprom_mac_addr>; +}; + +The current implementation of Prestera Switchdev PCI interface driver requires +that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range: + +&cp0_pcie0 { + ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000 + 0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000 + 0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>; + phys = <&cp0_comphy0 0>; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 26afb556dfae..e811e0fd851c 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -100,6 +100,8 @@ patternProperties: required: - reg +additionalProperties: true + examples: - | davinci_mdio: mdio@5c030000 { diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml index aea88e621792..0bbd598704e9 100644 --- a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml @@ -61,6 +61,8 @@ required: - mediatek,pericfg - phy-handle +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt deleted file mode 100644 index f02f6fb7f81c..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Samsung S3FWRN5 NCI NFC Controller - -Required properties: -- compatible: Should be "samsung,s3fwrn5-i2c". -- reg: address on the bus -- interrupts: GPIO interrupt to which the chip is connected -- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip -- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and - sleep/wakeup control - -Example: - -&hsi2c_4 { - s3fwrn5@27 { - compatible = "samsung,s3fwrn5-i2c"; - - reg = <0x27>; - - interrupt-parent = <&gpa1>; - interrupts = <3 0 0>; - - s3fwrn5,en-gpios = <&gpf1 4 0>; - s3fwrn5,fw-gpios = <&gpj0 2 0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml new file mode 100644 index 000000000000..cb0b8a560282 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/samsung,s3fwrn5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3FWRN5 NCI NFC Controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Krzysztof Opasiak <k.opasiak@samsung.com> + +properties: + compatible: + const: samsung,s3fwrn5-i2c + + en-gpios: + maxItems: 1 + description: + Output GPIO pin used for enabling/disabling the chip + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + wake-gpios: + maxItems: 1 + description: + Output GPIO pin used to enter firmware mode and sleep/wakeup control + + s3fwrn5,en-gpios: + maxItems: 1 + deprecated: true + description: + Use en-gpios + + s3fwrn5,fw-gpios: + maxItems: 1 + deprecated: true + description: + Use wake-gpios + +additionalProperties: false + +required: + - compatible + - en-gpios + - interrupts + - reg + - wake-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + s3fwrn5@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + + interrupt-parent = <&gpa1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + + en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; + wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml index 42be0255512b..d51da24f3505 100644 --- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml @@ -34,6 +34,8 @@ patternProperties: required: - reg +unevaluatedProperties: false + examples: - | mdio { diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml index f99a5aabe923..f0db22645d73 100644 --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml @@ -72,6 +72,8 @@ required: - resets - reset-names +unevaluatedProperties: false + examples: # Lager board - | diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 1788884b8c28..64b3357ade8a 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -59,6 +59,8 @@ properties: regulator to VDDIO. $ref: /schemas/regulator/regulator.yaml +unevaluatedProperties: false + examples: - | #include <dt-bindings/net/qca-ar803x.h> diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 8594f114f016..4d8464b2676d 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -144,6 +144,8 @@ oneOf: - required: - memory-region +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml index 13555a89975f..0c973310ada0 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml @@ -31,6 +31,8 @@ required: - "#address-cells" - "#size-cells" +unevaluatedProperties: false + examples: - | mdio@90000 { diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml index 67df3fe861ee..948677ade6d1 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml @@ -33,6 +33,8 @@ required: - "#address-cells" - "#size-cells" +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-ipq806x.h> diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml index c488f24ed38f..4f485df69ac3 100644 --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml @@ -37,6 +37,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> @@ -49,6 +51,6 @@ examples: bluetooth { compatible = "realtek,rtl8723bs-bt"; device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ - host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ }; }; diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml new file mode 100644 index 000000000000..244befb6402a --- /dev/null +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -0,0 +1,262 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/renesas,etheravb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Ethernet AVB + +maintainers: + - Sergei Shtylyov <sergei.shtylyov@gmail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,etheravb-r8a7742 # RZ/G1H + - renesas,etheravb-r8a7743 # RZ/G1M + - renesas,etheravb-r8a7744 # RZ/G1N + - renesas,etheravb-r8a7745 # RZ/G1E + - renesas,etheravb-r8a77470 # RZ/G1C + - renesas,etheravb-r8a7790 # R-Car H2 + - renesas,etheravb-r8a7791 # R-Car M2-W + - renesas,etheravb-r8a7792 # R-Car V2H + - renesas,etheravb-r8a7793 # R-Car M2-N + - renesas,etheravb-r8a7794 # R-Car E2 + - const: renesas,etheravb-rcar-gen2 # R-Car Gen2 and RZ/G1 + + - items: + - enum: + - renesas,etheravb-r8a774a1 # RZ/G2M + - renesas,etheravb-r8a774b1 # RZ/G2N + - renesas,etheravb-r8a774c0 # RZ/G2E + - renesas,etheravb-r8a774e1 # RZ/G2H + - renesas,etheravb-r8a7795 # R-Car H3 + - renesas,etheravb-r8a7796 # R-Car M3-W + - renesas,etheravb-r8a77961 # R-Car M3-W+ + - renesas,etheravb-r8a77965 # R-Car M3-N + - renesas,etheravb-r8a77970 # R-Car V3M + - renesas,etheravb-r8a77980 # R-Car V3H + - renesas,etheravb-r8a77990 # R-Car E3 + - renesas,etheravb-r8a77995 # R-Car D3 + - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2 + + reg: true + + interrupts: true + + interrupt-names: true + + clocks: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + phy-mode: true + + phy-handle: true + + '#address-cells': + description: Number of address cells for the MDIO bus. + const: 1 + + '#size-cells': + description: Number of size cells on the MDIO bus. + const: 0 + + renesas,no-ether-link: + type: boolean + description: + Specify when a board does not provide a proper AVB_LINK signal. + + renesas,ether-link-active-low: + type: boolean + description: + Specify when the AVB_LINK signal is active-low instead of normal + active-high. + + rx-internal-delay-ps: + enum: [0, 1800] + + tx-internal-delay-ps: + enum: [0, 2000] + +patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: ethernet-phy.yaml# + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + - phy-mode + - phy-handle + - '#address-cells' + - '#size-cells' + +allOf: + - $ref: ethernet-controller.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,etheravb-rcar-gen2 + - renesas,etheravb-r8a7795 + - renesas,etheravb-r8a7796 + - renesas,etheravb-r8a77961 + - renesas,etheravb-r8a77965 + then: + properties: + reg: + items: + - description: MAC register block + - description: Stream buffer + else: + properties: + reg: + items: + - description: MAC register block + + - if: + properties: + compatible: + contains: + const: renesas,etheravb-rcar-gen2 + then: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: mux + rx-internal-delay-ps: false + else: + properties: + interrupts: + minItems: 25 + maxItems: 25 + interrupt-names: + items: + pattern: '^ch[0-9]+$' + required: + - interrupt-names + - rx-internal-delay-ps + + - if: + properties: + compatible: + contains: + enum: + - renesas,etheravb-r8a774a1 + - renesas,etheravb-r8a774b1 + - renesas,etheravb-r8a7795 + - renesas,etheravb-r8a7796 + - renesas,etheravb-r8a77961 + - renesas,etheravb-r8a77965 + - renesas,etheravb-r8a77970 + - renesas,etheravb-r8a77980 + then: + required: + - tx-internal-delay-ps + else: + properties: + tx-internal-delay-ps: false + + - if: + properties: + compatible: + contains: + const: renesas,etheravb-r8a77995 + then: + properties: + rx-internal-delay-ps: + const: 1800 + + - if: + properties: + compatible: + contains: + const: renesas,etheravb-r8a77980 + then: + properties: + tx-internal-delay-ps: + const: 2000 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + #include <dt-bindings/gpio/gpio.h> + aliases { + ethernet0 = &avb; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7795", + "renesas,etheravb-rcar-gen3"; + reg = <0xe6800000 0x800>, <0xe6a00000 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", + "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", + "ch13", "ch14", "ch15", "ch16", "ch17", "ch18", + "ch19", "ch20", "ch21", "ch22", "ch23", "ch24"; + clocks = <&cpg CPG_MOD 812>; + iommus = <&ipmmu_ds0 16>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <2000>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt deleted file mode 100644 index 032b76f14f4f..000000000000 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ /dev/null @@ -1,134 +0,0 @@ -* Renesas Electronics Ethernet AVB - -This file provides information on what the device node for the Ethernet AVB -interface contains. - -Required properties: -- compatible: Must contain one or more of the following: - - "renesas,etheravb-r8a7742" for the R8A7742 SoC. - - "renesas,etheravb-r8a7743" for the R8A7743 SoC. - - "renesas,etheravb-r8a7744" for the R8A7744 SoC. - - "renesas,etheravb-r8a7745" for the R8A7745 SoC. - - "renesas,etheravb-r8a77470" for the R8A77470 SoC. - - "renesas,etheravb-r8a7790" for the R8A7790 SoC. - - "renesas,etheravb-r8a7791" for the R8A7791 SoC. - - "renesas,etheravb-r8a7792" for the R8A7792 SoC. - - "renesas,etheravb-r8a7793" for the R8A7793 SoC. - - "renesas,etheravb-r8a7794" for the R8A7794 SoC. - - "renesas,etheravb-rcar-gen2" as a fallback for the above - R-Car Gen2 and RZ/G1 devices. - - - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC. - - "renesas,etheravb-r8a774b1" for the R8A774B1 SoC. - - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC. - - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - - "renesas,etheravb-r8a7796" for the R8A77960 SoC. - - "renesas,etheravb-r8a77961" for the R8A77961 SoC. - - "renesas,etheravb-r8a77965" for the R8A77965 SoC. - - "renesas,etheravb-r8a77970" for the R8A77970 SoC. - - "renesas,etheravb-r8a77980" for the R8A77980 SoC. - - "renesas,etheravb-r8a77990" for the R8A77990 SoC. - - "renesas,etheravb-r8a77995" for the R8A77995 SoC. - - "renesas,etheravb-rcar-gen3" as a fallback for the above - R-Car Gen3 and RZ/G2 devices. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first followed by - the generic version. - -- reg: Offset and length of (1) the register block and (2) the stream buffer. - The region for the register block is mandatory. - The region for the stream buffer is optional, as it is only present on - R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A77960), - M3-W+ (R8A77961), and M3-N (R8A77965). -- interrupts: A list of interrupt-specifiers, one for each entry in - interrupt-names. - If interrupt-names is not present, an interrupt specifier - for a single muxed interrupt. -- phy-mode: see ethernet.txt file in the same directory. -- phy-handle: see ethernet.txt file in the same directory. -- #address-cells: number of address cells for the MDIO bus, must be equal to 1. -- #size-cells: number of size cells on the MDIO bus, must be equal to 0. -- clocks: clock phandle and specifier pair. -- pinctrl-0: phandle, referring to a default pin configuration node. - -Optional properties: -- interrupt-names: A list of interrupt names. - For the R-Car Gen 3 SoCs this property is mandatory; - it should include one entry per channel, named "ch%u", - where %u is the channel number ranging from 0 to 24. - For other SoCs this property is optional; if present - it should contain "mux" for a single muxed interrupt. -- pinctrl-names: pin configuration state name ("default"). -- renesas,no-ether-link: boolean, specify when a board does not provide a proper - AVB_LINK signal. -- renesas,ether-link-active-low: boolean, specify when the AVB_LINK signal is - active-low instead of normal active-high. - -Example: - - ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7795", "renesas,etheravb-rcar-gen3"; - reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14", "ch15", - "ch16", "ch17", "ch18", "ch19", - "ch20", "ch21", "ch22", "ch23", - "ch24"; - clocks = <&cpg CPG_MOD 812>; - power-domains = <&cpg>; - phy-mode = "rgmii-id"; - phy-handle = <&phy0>; - - pinctrl-0 = <ðer_pins>; - pinctrl-names = "default"; - renesas,no-ether-link; - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <900>; - rxdv-skew-ps = <0>; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txc-skew-ps = <900>; - txen-skew-ps = <0>; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; - reg = <0>; - interrupt-parent = <&gpio2>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt index 8b7c719b0bb9..a8d0dc9a8c0e 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt @@ -5,6 +5,10 @@ through an Ethernet OF device node. Optional properties: +- clocks: + The clock used as phy reference clock and is connected to phy + pin XTAL1/CLKIN. + - smsc,disable-energy-detect: If set, do not enable energy detect mode for the SMSC phy. default: enable energy detect mode diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 30a1efd26626..11a6fdb657c9 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -356,6 +356,8 @@ allOf: Enables the TSO feature otherwise it will be managed by MAC HW capability register. +additionalProperties: true + examples: - | stmmac_axi_setup: stmmac-axi-config { diff --git a/Documentation/devicetree/bindings/net/socionext-netsec.txt b/Documentation/devicetree/bindings/net/socionext-netsec.txt index 9d6c9feb12ff..a3c1dffaa4bb 100644 --- a/Documentation/devicetree/bindings/net/socionext-netsec.txt +++ b/Documentation/devicetree/bindings/net/socionext-netsec.txt @@ -30,7 +30,9 @@ Optional properties: (See ethernet.txt file in the same directory) - max-frame-size: See ethernet.txt in the same directory. The MAC address will be determined using the optional properties -defined in ethernet.txt. +defined in ethernet.txt. The 'phy-mode' property is required, but may +be set to the empty string if the PHY configuration is programmed by +the firmware or set by hardware straps, and needs to be preserved. Example: eth0: ethernet@522d0000 { diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index e5dff66df481..27eb6066793f 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -88,6 +88,8 @@ required: - clock-names - st,syscon +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index d454c1fab930..5728fe23f530 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -58,6 +58,8 @@ required: - "#address-cells" - "#size-cells" +unevaluatedProperties: false + examples: - | davinci_mdio: mdio@4a101000 { diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml new file mode 100644 index 000000000000..55913534cbc2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/ti,dp83822.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI DP83822 ethernet PHY + +maintainers: + - Dan Murphy <dmurphy@ti.com> + +description: | + The DP83822 is a low-power, single-port, 10/100 Mbps Ethernet PHY. It + provides all of the physical layer functions needed to transmit and receive + data over standard, twisted-pair cables or to connect to an external, + fiber-optic transceiver. Additionally, the DP83822 provides flexibility to + connect to a MAC through a standard MII, RMII, or RGMII interface + + Specifications about the Ethernet PHY can be found at: + http://www.ti.com/lit/ds/symlink/dp83822i.pdf + +allOf: + - $ref: "ethernet-phy.yaml#" + +properties: + reg: + maxItems: 1 + + ti,link-loss-low: + type: boolean + description: | + DP83822 PHY in Fiber mode only. + Sets the DP83822 to detect a link drop condition when the signal goes + high. If not set then link drop will occur when the signal goes low. + This property is only applicable if the fiber mode support is strapped + to on. + + ti,fiber-mode: + type: boolean + description: | + DP83822 PHY only. + If present the DP83822 PHY is configured to operate in fiber mode + Fiber mode support can also be strapped. If the strap pin is not set + correctly or not set at all then this boolean can be used to enable it. + If the fiber mode is not strapped then signal detection for the PHY + is disabled. + In fiber mode, auto-negotiation is disabled and the PHY can only work in + 100base-fx (full and half duplex) modes. + + rx-internal-delay-ps: + description: | + DP83822 PHY only. + Setting this property to a non-zero number sets the RX internal delay + for the PHY. The internal delay for the PHY is fixed to 3.5ns relative + to receive data. + + tx-internal-delay-ps: + description: | + DP83822 PHY only. + Setting this property to a non-zero number sets the TX internal delay + for the PHY. The internal delay for the PHY is fixed to 3.5ns relative + to transmit data. + +required: + - reg + +examples: + - | + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + ethphy0: ethernet-phy@0 { + reg = <0>; + rx-internal-delay-ps = <1>; + tx-internal-delay-ps = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml index c6716ac6cbcc..4050a3608658 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml @@ -109,6 +109,8 @@ properties: required: - reg +unevaluatedProperties: false + examples: - | #include <dt-bindings/net/ti-dp83867.h> diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml index cf40b469c719..c3235f08e326 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml @@ -79,6 +79,8 @@ properties: required: - reg +unevaluatedProperties: false + examples: - | #include <dt-bindings/net/ti-dp83869.h> diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml index 2c320eb2a8c4..6c35682377e6 100644 --- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml @@ -18,6 +18,8 @@ properties: compatible: const: microchip,wilc1000 + reg: true + spi-max-frequency: true interrupts: @@ -34,6 +36,8 @@ required: - compatible - interrupts +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 65ee68efd574..b61c2d5a0ff7 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -65,7 +65,8 @@ Optional properties: the length can vary between hw versions. - <supply-name>-supply: handle to the regulator device tree node optional "supply-name" are "vdd-0.8-cx-mx", - "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0". + "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0", + and "vdd-3.3-ch1". - memory-region: Usage: optional Value type: <phandle> @@ -204,6 +205,7 @@ wifi@18000000 { vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l26a_3p3>; memory-region = <&wifi_msa_mem>; iommus = <&apps_smmu 0x0040 0x1>; qcom,msa-fixed-perm; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index a1717db36dba..4b365c9d9378 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -17,7 +17,9 @@ description: | properties: compatible: - const: qcom,ipq8074-wifi + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index 1c9d7f05f173..8a43dc1283fe 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -19,21 +19,29 @@ allOf: properties: compatible: - items: - - enum: - - fsl,imx6q-ocotp - - fsl,imx6sl-ocotp - - fsl,imx6sx-ocotp - - fsl,imx6ul-ocotp - - fsl,imx6ull-ocotp - - fsl,imx7d-ocotp - - fsl,imx6sll-ocotp - - fsl,imx7ulp-ocotp - - fsl,imx8mq-ocotp - - fsl,imx8mm-ocotp - - fsl,imx8mn-ocotp - - fsl,imx8mp-ocotp - - const: syscon + oneOf: + - items: + - enum: + - fsl,imx6q-ocotp + - fsl,imx6sl-ocotp + - fsl,imx6sx-ocotp + - fsl,imx6ul-ocotp + - fsl,imx6ull-ocotp + - fsl,imx7d-ocotp + - fsl,imx6sll-ocotp + - fsl,imx7ulp-ocotp + - fsl,imx8mq-ocotp + - fsl,imx8mm-ocotp + - const: syscon + - items: + - enum: + - fsl,imx8mn-ocotp + # i.MX8MP not really compatible with fsl,imx8mm-ocotp, however + # the code for getting SoC revision depends on fsl,imx8mm-ocotp + # compatible. + - fsl,imx8mp-ocotp + - const: fsl,imx8mm-ocotp + - const: syscon reg: maxItems: 1 @@ -68,6 +76,8 @@ patternProperties: additionalProperties: false +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/imx6sx-clock.h> diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml index b7c00ed31085..d5d7f113bade 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml @@ -36,6 +36,8 @@ dependencies: nvmem-names: [ nvmem ] nvmem-cell-names: [ nvmem-cells ] +additionalProperties: true + examples: - | tsens { diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index b459f9dba6c9..7481a9e48f19 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -67,6 +67,8 @@ patternProperties: required: - reg +additionalProperties: true + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 59aca6d22ff9..1a18b6bab35e 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -49,6 +49,8 @@ required: - compatible - reg +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sc7180.h> diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml index 7bbd4e62044e..a835e64bc6f5 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml @@ -66,6 +66,8 @@ patternProperties: additionalProperties: false +unevaluatedProperties: false + examples: - | sdam_1: nvram@b000 { diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml index 3ae00b0b23bc..104dd508565e 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml @@ -51,6 +51,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/rk3288-cru.h> diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt deleted file mode 100644 index 3cb170896658..000000000000 --- a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt +++ /dev/null @@ -1,21 +0,0 @@ -Device tree bindings for Low Power General Purpose Register found in i.MX6Q/D -and i.MX7 Secure Non-Volatile Storage. - -This DT node should be represented as a sub-node of a "syscon", -"simple-mfd" node. - -Required properties: -- compatible: should be one of the fallowing variants: - "fsl,imx6q-snvs-lpgpr" for Freescale i.MX6Q/D/DL/S - "fsl,imx6ul-snvs-lpgpr" for Freescale i.MX6UL - "fsl,imx7d-snvs-lpgpr" for Freescale i.MX7D/S - -Example: -snvs: snvs@020cc000 { - compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; - reg = <0x020cc000 0x4000>; - - snvs_lpgpr: snvs-lpgpr { - compatible = "fsl,imx6q-snvs-lpgpr"; - }; -}; diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml new file mode 100644 index 000000000000..c819f0e90320 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/snvs-lpgpr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Low Power General Purpose Register found in i.MX Secure Non-Volatile Storage + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +properties: + compatible: + enum: + - fsl,imx6q-snvs-lpgpr + - fsl,imx6ul-snvs-lpgpr + - fsl,imx7d-snvs-lpgpr + +required: + - compatible + +additionalProperties: false + +examples: + - | + snvs@20cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x20cc000 0x4000>; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx6q-snvs-lpgpr"; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml index c11c99f085d7..0b80ce22a2f8 100644 --- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml @@ -42,6 +42,8 @@ required: - compatible - reg +unevaluatedProperties: false + examples: - | efuse@1fff7800 { diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml index aef87a33a7c9..aeff2bd774dd 100644 --- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml +++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml @@ -31,6 +31,8 @@ properties: Documentation/devicetree/bindings/nvmem/nvmem.txt and also examples below. + opp-shared: true + required: - compatible - nvmem-cells @@ -53,7 +55,7 @@ patternProperties: unevaluatedProperties: false -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 9d16d417e9be..9847dfeeffcb 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -154,25 +154,27 @@ Optional properties: - opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs in the table have this, the OPP with highest opp-hz will be used. -- opp-supported-hw: This enables us to select only a subset of OPPs from the - larger OPP table, based on what version of the hardware we are running on. We - still can't have multiple nodes with the same opp-hz value in OPP table. - - It's a user defined array containing a hierarchy of hardware version numbers, - supported by the OPP. For example: a platform with hierarchy of three levels - of versions (A, B and C), this field should be like <X Y Z>, where X - corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z - corresponds to version hierarchy C. - - Each level of hierarchy is represented by a 32 bit value, and so there can be - only 32 different supported version per hierarchy. i.e. 1 bit per version. A - value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy - level. And a value of 0x00000000 will disable the OPP completely, and so we - never want that to happen. - - If 32 values aren't sufficient for a version hierarchy, than that version - hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the - above example, Z1 & Z2 refer to the version hierarchy Z. +- opp-supported-hw: This property allows a platform to enable only a subset of + the OPPs from the larger set present in the OPP table, based on the current + version of the hardware (already known to the operating system). + + Each block present in the array of blocks in this property, represents a + sub-group of hardware versions supported by the OPP. i.e. <sub-group A>, + <sub-group B>, etc. The OPP will be enabled if _any_ of these sub-groups match + the hardware's version. + + Each sub-group is a platform defined array representing the hierarchy of + hardware versions supported by the platform. For a platform with three + hierarchical levels of version (X.Y.Z), this field shall look like + + opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>. + + Each level (eg. X1) in version hierarchy is represented by a 32 bit value, one + bit per version and so there can be maximum 32 versions per level. Logical AND + (&) operation is performed for each level with the hardware's level version + and a non-zero output for _all_ the levels in a sub-group means the OPP is + supported by hardware. A value of 0xFFFFFFFF for each level in the sub-group + will enable the OPP for all versions for the hardware. - status: Marks the node enabled/disabled. @@ -503,7 +505,6 @@ Example 5: opp-supported-hw */ opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF> opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <915000 900000 925000>; ... }; @@ -516,7 +517,17 @@ Example 5: opp-supported-hw */ opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0> opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <915000 900000 925000>; + ... + }; + + opp-900000000 { + /* + * Supports: + * - All cuts and substrate where process version is 0x2. + * - All cuts and process where substrate version is 0x2. + */ + opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>, <0xFFFFFFFF 0x01 0xFFFFFFFF> + opp-hz = /bits/ 64 <900000000>; ... }; }; diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 8680a0f86c5a..807694b4f41f 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -9,12 +9,15 @@ title: Brcmstb PCIe Host Controller Device Tree Bindings maintainers: - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> -allOf: - - $ref: /schemas/pci/pci-bus.yaml# - properties: compatible: - const: brcm,bcm2711-pcie # The Raspberry Pi 4 + items: + - enum: + - brcm,bcm2711-pcie # The Raspberry Pi 4 + - brcm,bcm7211-pcie # Broadcom STB version of RPi4 + - brcm,bcm7278-pcie # Broadcom 7278 Arm + - brcm,bcm7216-pcie # Broadcom 7216 Arm + - brcm,bcm7445-pcie # Broadcom 7445 Arm reg: maxItems: 1 @@ -34,10 +37,12 @@ properties: - const: msi ranges: - maxItems: 1 + minItems: 1 + maxItems: 4 dma-ranges: - maxItems: 1 + minItems: 1 + maxItems: 6 clocks: maxItems: 1 @@ -58,8 +63,31 @@ properties: aspm-no-l0s: true + resets: + description: for "brcm,bcm7216-pcie", must be a valid reset + phandle pointing to the RESCAL reset controller provider node. + $ref: "/schemas/types.yaml#/definitions/phandle" + + reset-names: + items: + - const: rescal + + brcm,scb-sizes: + description: u64 giving the 64bit PCIe memory + viewport size of a memory controller. There may be up to + three controllers, and each size must be a power of two + with a size greater or equal to the amount of memory the + controller supports. Note that each memory controller + may have two component regions -- base and extended -- so + this information cannot be deduced from the dma-ranges. + $ref: /schemas/types.yaml#/definitions/uint64-array + items: + minItems: 1 + maxItems: 3 + required: - reg + - ranges - dma-ranges - "#interrupt-cells" - interrupts @@ -68,6 +96,18 @@ required: - interrupt-map - msi-controller +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - if: + properties: + compatible: + contains: + const: brcm,bcm7216-pcie + then: + required: + - resets + - reset-names + unevaluatedProperties: false examples: @@ -93,7 +133,9 @@ examples: msi-parent = <&pcie0>; msi-controller; ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; - dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; + dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>, + <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>; brcm,enable-ssc; + brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>; }; }; diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml index 50ce5d79d2c7..651eee88989d 100644 --- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml @@ -29,6 +29,8 @@ required: - reg - reg-names +unevaluatedProperties: false + examples: - | bus { diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml index 6d67067843bf..293b8ec318bc 100644 --- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml @@ -31,6 +31,8 @@ required: - reg - reg-names +unevaluatedProperties: false + examples: - | bus { diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml index 016a5f61592d..60b8baf299bb 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml @@ -22,3 +22,5 @@ properties: required: - cdns,max-outbound-regions + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml index 303078a7b7a8..a944f9bfffff 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml @@ -33,3 +33,5 @@ properties: deprecated: true msi-parent: true + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml index 02553d5e6c51..df4fe28222b0 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml @@ -21,3 +21,5 @@ properties: items: - const: pcie-phy # FIXME: names when more than 1 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml index 47353d0cd394..6bcaa8f2c3cf 100644 --- a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml @@ -137,6 +137,8 @@ allOf: reg: maxItems: 1 +unevaluatedProperties: false + examples: - | diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index 99a386ea691c..daa99f7d4c3f 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -24,6 +24,8 @@ Required properties: "fsl,ls1028a-pcie" EP mode: "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml index 30e7cf1aeb87..81bae060cbde 100644 --- a/Documentation/devicetree/bindings/pci/loongson.yaml +++ b/Documentation/devicetree/bindings/pci/loongson.yaml @@ -39,6 +39,8 @@ required: - reg - ranges +unevaluatedProperties: false + examples: - | diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml index 0f8e575ac01a..7847bbcd4a03 100644 --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -36,3 +36,5 @@ properties: required: - compatible + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml index aa483c7f27fd..84eeb7fe6e01 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml @@ -14,8 +14,12 @@ maintainers: properties: compatible: items: - - const: renesas,r8a774c0-pcie-ep - - const: renesas,rcar-gen3-pcie-ep + - enum: + - renesas,r8a774a1-pcie-ep # RZ/G2M + - renesas,r8a774b1-pcie-ep # RZ/G2N + - renesas,r8a774c0-pcie-ep # RZ/G2E + - renesas,r8a774e1-pcie-ep # RZ/G2H + - const: renesas,rcar-gen3-pcie-ep # R-Car Gen3 and RZ/G2 reg: maxItems: 5 @@ -55,6 +59,8 @@ required: - clock-names - max-functions +additionalProperties: false + examples: - | #include <dt-bindings/clock/r8a774c0-cpg-mssr.h> diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index 1041c44a614f..14d307deff06 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -1,7 +1,8 @@ * Renesas R-Car PCIe interface Required properties: -compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; +compatible: "renesas,pcie-r8a7742" for the R8A7742 SoC; + "renesas,pcie-r8a7743" for the R8A7743 SoC; "renesas,pcie-r8a7744" for the R8A7744 SoC; "renesas,pcie-r8a774a1" for the R8A774A1 SoC; "renesas,pcie-r8a774b1" for the R8A774B1 SoC; diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml index f0558b9cf9e9..f4292d2c54e3 100644 --- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml @@ -23,14 +23,22 @@ properties: const: socionext,uniphier-pro5-pcie-ep reg: - maxItems: 4 + minItems: 4 + maxItems: 5 reg-names: - items: - - const: dbi - - const: dbi2 - - const: link - - const: addr_space + oneOf: + - items: + - const: dbi + - const: dbi2 + - const: link + - const: addr_space + - items: + - const: dbi + - const: dbi2 + - const: link + - const: addr_space + - const: atu clocks: maxItems: 2 diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml index b3c3d0c3c390..3ae3e1a2d4b0 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml @@ -63,6 +63,8 @@ required: - phys - phy-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/soc/ti,sci_pm_domain.h> diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml index 8200ba00bc09..ee7a8eade3f6 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml @@ -72,6 +72,8 @@ required: - phys - phy-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/soc/ti,sci_pm_domain.h> diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt index 1fa2c5906d4d..c4b7381733a0 100644 --- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt +++ b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt @@ -16,6 +16,7 @@ Required properties: "dbi" - controller configuration registers "link" - SoC-specific glue layer registers "config" - PCIe configuration space + "atu" - iATU registers for DWC version 4.80 or later - clocks: A phandle to the clock gate for PCIe glue layer including the host controller. - resets: A phandle to the reset line for PCIe glue layer including diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml index 07a48c27db1f..09748ef6b94f 100644 --- a/Documentation/devicetree/bindings/pci/versatile.yaml +++ b/Documentation/devicetree/bindings/pci/versatile.yaml @@ -48,6 +48,8 @@ required: - interrupt-map - interrupt-map-mask +unevaluatedProperties: false + examples: - | pci@10001000 { diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml new file mode 100644 index 000000000000..e4fcc0de25e2 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2020 Arm Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/arm,cmn.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CMN (Coherent Mesh Network) Performance Monitors + +maintainers: + - Robin Murphy <robin.murphy@arm.com> + +properties: + compatible: + const: arm,cmn-600 + + reg: + items: + - description: Physical address of the base (PERIPHBASE) and + size (up to 64MB) of the configuration address space. + + interrupts: + minItems: 1 + maxItems: 4 + items: + - description: Overflow interrupt for DTC0 + - description: Overflow interrupt for DTC1 + - description: Overflow interrupt for DTC2 + - description: Overflow interrupt for DTC3 + description: One interrupt for each DTC domain implemented must + be specified, in order. DTC0 is always present. + + arm,root-node: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset from PERIPHBASE of the configuration + discovery node (see TRM definition of ROOTNODEBASE). + +required: + - compatible + - reg + - interrupts + - arm,root-node + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + pmu@50000000 { + compatible = "arm,cmn-600"; + reg = <0x50000000 0x4000000>; + /* 4x2 mesh with one DTC, and CFG node at 0,1,1,0 */ + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + arm,root-node = <0x104000>; + }; +... diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt deleted file mode 100644 index 7822a806ea0a..000000000000 --- a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Freescale(NXP) IMX8 DDR performance monitor - -Required properties: - -- compatible: should be one of: - "fsl,imx8-ddr-pmu" - "fsl,imx8m-ddr-pmu" - "fsl,imx8mp-ddr-pmu" - -- reg: physical address and size - -- interrupts: single interrupt - generated by the control block - -Example: - - ddr-pmu@5c020000 { - compatible = "fsl,imx8-ddr-pmu"; - reg = <0x5c020000 0x10000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml new file mode 100644 index 000000000000..5aad9f4e0b2a --- /dev/null +++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/fsl-imx-ddr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale(NXP) IMX8 DDR performance monitor + +maintainers: + - Frank Li <frank.li@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx8-ddr-pmu + - fsl,imx8m-ddr-pmu + - fsl,imx8mp-ddr-pmu + - items: + - enum: + - fsl,imx8mm-ddr-pmu + - fsl,imx8mn-ddr-pmu + - fsl,imx8mq-ddr-pmu + - fsl,imx8mp-ddr-pmu + - const: fsl,imx8m-ddr-pmu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml index 0d2557bb0bcc..399ebde45409 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml @@ -63,6 +63,8 @@ then: required: - power-domains +additionalProperties: false + examples: - | phy@36000 { diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt index ed47e5cd067e..7c70f2ad9942 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt @@ -1,7 +1,7 @@ * Freescale i.MX8MQ USB3 PHY binding Required properties: -- compatible: Should be "fsl,imx8mq-usb-phy" +- compatible: Should be "fsl,imx8mq-usb-phy" or "fsl,imx8mp-usb-phy" - #phys-cells: must be 0 (see phy-bindings.txt in this directory) - reg: The base address and length of the registers - clocks: phandles to the clocks for each clock listed in clock-names diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml new file mode 100644 index 000000000000..c2e073e26190 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/hisilicon,hi3660-usb3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Kirin 960 USB PHY + +maintainers: + - Mauro Carvalho Chehab <mchehab+huawei@kernel.org> +description: |+ + Bindings for USB3 PHY on HiSilicon Kirin 960. + +properties: + compatible: + const: hisilicon,hi3660-usb-phy + + "#phy-cells": + const: 0 + + hisilicon,pericrg-syscon: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: phandle of syscon used to control iso refclk. + + hisilicon,pctrl-syscon: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: phandle of syscon used to control usb tcxo. + + hisilicon,eye-diagram-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Eye diagram for phy. + +required: + - compatible + - hisilicon,pericrg-syscon + - hisilicon,pctrl-syscon + - hisilicon,eye-diagram-param + - "#phy-cells" + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + usb3_otg_bc: usb3_otg_bc@ff200000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff200000 0x0 0x1000>; + + usb-phy { + compatible = "hisilicon,hi3660-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,eye-diagram-param = <0x22466e4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml index 77bb5309918e..edd9d70a672a 100644 --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml @@ -23,7 +23,9 @@ description: |+ properties: compatible: - const: intel,lgm-emmc-phy + oneOf: + - const: intel,lgm-emmc-phy + - const: intel,keembay-emmc-phy "#phy-cells": const: 0 @@ -34,6 +36,10 @@ properties: clocks: maxItems: 1 + clock-names: + items: + - const: emmcclk + required: - "#phy-cells" - compatible @@ -57,4 +63,13 @@ examples: #phy-cells = <0>; }; }; + + - | + phy@20290000 { + compatible = "intel,keembay-emmc-phy"; + reg = <0x20290000 0x54>; + clocks = <&emmc>; + clock-names = "emmcclk"; + #phy-cells = <0>; + }; ... diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml new file mode 100644 index 000000000000..ce62c0b94daf --- /dev/null +++ b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/intel,lgm-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel LGM USB PHY Device Tree Bindings + +maintainers: + - Vadivel Murugan Ramuthevar <vadivel.muruganx.ramuthevar@linux.intel.com> + +properties: + compatible: + const: intel,lgm-usb-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + items: + - description: USB PHY and Host controller reset + - description: APB BUS reset + - description: General Hardware reset + + reset-names: + items: + - const: phy + - const: apb + - const: phy31 + + "#phy-cells": + const: 0 + +required: + - compatible + - clocks + - reg + - resets + - reset-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + usb-phy@e7e00000 { + compatible = "intel,lgm-usb-phy"; + reg = <0xe7e00000 0x10000>; + clocks = <&cgu0 153>; + resets = <&rcu 0x70 0x24>, + <&rcu 0x70 0x26>, + <&rcu 0x70 0x28>; + reset-names = "phy", "apb", "phy31"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index 4071438be2ba..e266ade53d87 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -4,11 +4,13 @@ $id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Cadence Torrent SD0801 PHY binding for DisplayPort +title: Cadence Torrent SD0801 PHY binding description: This binding describes the Cadence SD0801 PHY (also known as Torrent PHY) - hardware included with the Cadence MHDP DisplayPort controller. + hardware included with the Cadence MHDP DisplayPort controller. Torrent + PHY also supports multilink multiprotocol combinations including protocols + such as PCIe, USB, SGMII, QSGMII etc. maintainers: - Swapnil Jakhade <sjakhade@cadence.com> @@ -49,13 +51,21 @@ properties: - const: dptx_phy resets: - maxItems: 1 - description: - Torrent PHY reset. - See Documentation/devicetree/bindings/reset/reset.txt + minItems: 1 + maxItems: 2 + items: + - description: Torrent PHY reset. + - description: Torrent APB reset. This is optional. + + reset-names: + minItems: 1 + maxItems: 2 + items: + - const: torrent_reset + - const: torrent_apb patternProperties: - '^phy@[0-7]+$': + '^phy@[0-3]$': type: object description: Each group of PHY lanes with a single master lane should be represented as a sub-node. @@ -63,6 +73,8 @@ patternProperties: reg: description: The master lane number. This is the lowest numbered lane in the lane group. + minimum: 0 + maximum: 3 resets: minItems: 1 @@ -78,15 +90,25 @@ patternProperties: Specifies the type of PHY for which the group of PHY lanes is used. Refer include/dt-bindings/phy/phy.h. Constants from the header should be used. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 3, 4, 5, 6] + minimum: 1 + maximum: 9 cdns,num-lanes: description: - Number of DisplayPort lanes. + Number of lanes. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4] + enum: [1, 2, 3, 4] default: 4 + cdns,ssc-mode: + description: + Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC, + EXTERNAL_SSC or INTERNAL_SSC. + Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 + cdns,max-bit-rate: description: Maximum DisplayPort link bit rate to use, in Mbps @@ -99,6 +121,7 @@ patternProperties: - resets - "#phy-cells" - cdns,phy-type + - cdns,num-lanes additionalProperties: false @@ -111,6 +134,7 @@ required: - reg - reg-names - resets + - reset-names additionalProperties: false @@ -128,18 +152,56 @@ examples: <0xf0 0xfb030a00 0x0 0x00000040>; reg-names = "torrent_phy", "dptx_phy"; resets = <&phyrst 0>; + reset-names = "torrent_reset"; clocks = <&ref_clk>; clock-names = "refclk"; #address-cells = <1>; #size-cells = <0>; phy@0 { - reg = <0>; - resets = <&phyrst 1>, <&phyrst 2>, - <&phyrst 3>, <&phyrst 4>; - #phy-cells = <0>; - cdns,phy-type = <PHY_TYPE_DP>; - cdns,num-lanes = <4>; - cdns,max-bit-rate = <8100>; + reg = <0>; + resets = <&phyrst 1>, <&phyrst 2>, + <&phyrst 3>, <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_DP>; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <8100>; + }; + }; + }; + - | + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/phy/phy-cadence-torrent.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + torrent-phy@f0fb500000 { + compatible = "cdns,torrent-phy"; + reg = <0xf0 0xfb500000 0x0 0x00100000>; + reg-names = "torrent_phy"; + resets = <&phyrst 0>, <&phyrst 1>; + reset-names = "torrent_reset", "torrent_apb"; + clocks = <&ref_clk>; + clock-names = "refclk"; + #address-cells = <1>; + #size-cells = <0>; + phy@0 { + reg = <0>; + resets = <&phyrst 2>, <&phyrst 3>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + cdns,num-lanes = <2>; + cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>; + }; + + phy@2 { + reg = <2>; + resets = <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_SGMII>; + cdns,num-lanes = <1>; + cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>; }; }; }; diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt deleted file mode 100644 index e88ba7d92dcb..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt +++ /dev/null @@ -1,26 +0,0 @@ -Hisilicon hi3660 USB PHY ------------------------ - -Required properties: -- compatible: should be "hisilicon,hi3660-usb-phy" -- #phy-cells: must be 0 -- hisilicon,pericrg-syscon: phandle of syscon used to control phy. -- hisilicon,pctrl-syscon: phandle of syscon used to control phy. -- hisilicon,eye-diagram-param: parameter set for phy -Refer to phy/phy-bindings.txt for the generic PHY binding properties - -This is a subnode of usb3_otg_bc register node. - -Example: - usb3_otg_bc: usb3_otg_bc@ff200000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0xff200000 0x0 0x1000>; - - usb-phy { - compatible = "hisilicon,hi3660-usb-phy"; - #phy-cells = <0>; - hisilicon,pericrg-syscon = <&crg_ctrl>; - hisilicon,pctrl-syscon = <&pctrl>; - hisilicon,eye-diagram-param = <0x22466e4>; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt deleted file mode 100644 index 744b4809542e..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt +++ /dev/null @@ -1,24 +0,0 @@ -STMicroelectronics STiH41x USB PHY binding ------------------------------------------- - -This file contains documentation for the usb phy found in STiH415/6 SoCs from -STMicroelectronics. - -Required properties: -- compatible : should be "st,stih416-usb-phy" or "st,stih415-usb-phy" -- st,syscfg : should be a phandle of the syscfg node -- clock-names : must contain "osc_phy" -- clocks : must contain an entry for each name in clock-names. -See: Documentation/devicetree/bindings/clock/clock-bindings.txt -- #phy-cells : must be 0 for this phy -See: Documentation/devicetree/bindings/phy/phy-bindings.txt - -Example: - -usb2_phy: usb2phy@0 { - compatible = "st,stih416-usb-phy"; - #phy-cells = <0>; - st,syscfg = <&syscfg_rear>; - clocks = <&clk_sysin>; - clock-names = "osc_phy"; -}; diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml index 23887ebe08fd..17f132ce5516 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml @@ -42,6 +42,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-ipq806x.h> diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml index fa30c24b4405..17fd7f6b83bb 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml @@ -60,6 +60,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-ipq806x.h> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml index ef8ae9f73092..33974ad10afe 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -13,17 +13,21 @@ maintainers: properties: compatible: enum: + - qcom,sc7180-qmp-usb3-dp-phy - qcom,sc7180-qmp-usb3-phy + - qcom,sdm845-qmp-usb3-dp-phy - qcom,sdm845-qmp-usb3-phy reg: items: - - description: Address and length of PHY's common serdes block. + - description: Address and length of PHY's USB serdes block. - description: Address and length of the DP_COM control block. + - description: Address and length of PHY's DP serdes block. reg-names: items: - - const: reg-base + - const: usb - const: dp_com + - const: dp "#clock-cells": enum: [ 1, 2 ] @@ -74,16 +78,74 @@ properties: #Required nodes: patternProperties: - "^phy@[0-9a-f]+$": + "^usb3-phy@[0-9a-f]+$": type: object description: - Each device node of QMP phy is required to have as many child nodes as - the number of lanes the PHY has. + The USB3 PHY. + + properties: + reg: + items: + - description: Address and length of TX. + - description: Address and length of RX. + - description: Address and length of PCS. + - description: Address and length of TX2. + - description: Address and length of RX2. + - description: Address and length of pcs_misc. + + clocks: + items: + - description: pipe clock + + clock-names: + items: + - const: pipe0 + + clock-output-names: + items: + - const: usb3_phy_pipe_clk_src + + '#clock-cells': + const: 0 + + '#phy-cells': + const: 0 + + required: + - reg + - clocks + - clock-names + - '#clock-cells' + - '#phy-cells' + + "^dp-phy@[0-9a-f]+$": + type: object + description: + The DP PHY. + + properties: + reg: + items: + - description: Address and length of TX. + - description: Address and length of RX. + - description: Address and length of PCS. + - description: Address and length of TX2. + - description: Address and length of RX2. + + '#clock-cells': + const: 1 + + '#phy-cells': + const: 0 + + required: + - reg + - '#clock-cells' + - '#phy-cells' required: - compatible - reg - - reg-names - "#clock-cells" - "#address-cells" - "#size-cells" @@ -101,14 +163,15 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sdm845-qmp-usb3-phy"; + compatible = "qcom,sdm845-qmp-usb3-dp-phy"; reg = <0x088e9000 0x18c>, - <0x088e8000 0x10>; - reg-names = "reg-base", "dp_com"; + <0x088e8000 0x10>, + <0x088ea000 0x40>; + reg-names = "usb", "dp_com", "dp"; #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x088e9000 0x1000>; + ranges = <0x0 0x088e9000 0x2000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, @@ -123,7 +186,7 @@ examples: vdda-phy-supply = <&vdda_usb2_ss_1p2>; vdda-pll-supply = <&vdda_usb2_ss_core>; - phy@200 { + usb3-phy@200 { reg = <0x200 0x128>, <0x400 0x200>, <0xc00 0x218>, @@ -136,4 +199,14 @@ examples: clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; }; + + dp-phy@88ea200 { + reg = <0xa200 0x200>, + <0xa400 0x200>, + <0xaa00 0x200>, + <0xa600 0x200>, + <0xa800 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index ccda92859eca..d457fb6a4779 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -158,6 +158,7 @@ required: - vdda-phy-dpdm-supply - resets +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml index 1118fe69b611..3e7191b168fb 100644 --- a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml @@ -36,6 +36,8 @@ required: - reset-names - "#phy-cells" +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-ipq4019.h> diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml new file mode 100644 index 000000000000..bab2ff4d9dc9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-ahci-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier AHCI PHY + +description: | + This describes the deivcetree bindings for PHY interfaces built into + AHCI controller implemented on Socionext UniPhier SoCs. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pxs2-ahci-phy + - socionext,uniphier-pxs3-ahci-phy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + maxItems: 2 + + clock-names: + oneOf: + - items: # for PXs2 + - const: link + - items: # for others + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + items: + - const: link + - const: phy + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + ahci-glue@65700000 { + compatible = "socionext,uniphier-pxs3-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci_phy: phy@10 { + compatible = "socionext,uniphier-pxs3-ahci-phy"; + reg = <0x10 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 28>, <&sys_clk 30>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml new file mode 100644 index 000000000000..15207ca9548f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/ti,omap-usb2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OMAP USB2 PHY + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + - Roger Quadros <rogerq@ti.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,dra7x-usb2 + - ti,dra7x-usb2-phy2 + - ti,am654-usb2 + - enum: + - ti,omap-usb2 + - items: + - const: ti,am437x-usb2 + - items: + - const: ti,omap-usb2 + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + items: + - description: wakeup clock + - description: reference clock + + clock-names: + minItems: 1 + items: + - const: wkupclk + - const: refclk + + syscon-phy-power: + $ref: /schemas/types.yaml#definitions/phandle-array + description: + phandle/offset pair. Phandle to the system control module and + register offset to power on/off the PHY. + + ctrl-module: + $ref: /schemas/types.yaml#definitions/phandle + description: + (deprecated) phandle of the control module used by PHY driver + to power on the PHY. Use syscon-phy-power instead. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + +examples: + - | + usb0_phy: phy@4100000 { + compatible = "ti,am654-usb2", "ti,omap-usb2"; + reg = <0x4100000 0x54>; + syscon-phy-power = <&scm_conf 0x4000>; + clocks = <&k3_clks 151 0>, <&k3_clks 151 1>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index 5ffc95c62909..c33e9bc79521 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -45,9 +45,15 @@ properties: ranges: true assigned-clocks: + minItems: 1 maxItems: 2 assigned-clock-parents: + minItems: 1 + maxItems: 2 + + assigned-clock-rates: + minItems: 1 maxItems: 2 typec-dir-gpios: @@ -119,9 +125,10 @@ patternProperties: logic. properties: clocks: + minItems: 2 maxItems: 4 - description: Phandle to four clock nodes representing the inputs to - refclk_dig + description: Phandle to two (Torrent) or four (Sierra) clock nodes representing + the inputs to refclk_dig "#clock-cells": const: 0 @@ -203,7 +210,7 @@ examples: }; refclk-dig { - clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz0_refclk_dig>; diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 8f93c3b694a7..60c9d0ac75e6 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -27,43 +27,6 @@ omap_control_usb: omap-control-usb@4a002300 { reg-names = "otghs_control"; }; -OMAP USB2 PHY - -Required properties: - - compatible: Should be "ti,omap-usb2" - Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on - DRA7x - Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY - in DRA7x - Should be "ti,am654-usb2" for the USB2 PHYs on AM654. - - reg : Address and length of the register set for the device. - - #phy-cells: determine the number of cells that should be given in the - phandle while referencing this phy. - - clocks: a list of phandles and clock-specifier pairs, one for each entry in - clock-names. - - clock-names: should include: - * "wkupclk" - wakeup clock. - * "refclk" - reference clock (optional). - -Deprecated properties: - - ctrl-module : phandle of the control module used by PHY driver to power on - the PHY. - -Recommended properies: -- syscon-phy-power : phandle/offset pair. Phandle to the system control - module and the register offset to power on/off the PHY. - -This is usually a subnode of ocp2scp to which it is connected. - -usb2phy@4a0ad080 { - compatible = "ti,omap-usb2"; - reg = <0x4a0ad080 0x58>; - ctrl-module = <&omap_control_usb>; - #phy-cells = <0>; - clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; - clock-names = "wkupclk", "refclk"; -}; - TI PIPE3 PHY Required properties: diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml new file mode 100644 index 000000000000..33391d30c00c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml @@ -0,0 +1,240 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi S500 SoC pinmux & GPIO controller + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + +description: | + Pinmux & GPIO controller manages pin multiplexing & configuration including + GPIO function selection & GPIO attributes configuration. Please refer to + pinctrl-bindings.txt in this directory for common binding part and usage. + +properties: + compatible: + const: actions,s500-pinctrl + + reg: + items: + - description: GPIO Output + GPIO Input + GPIO Data + - description: Multiplexing Control + - description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control + - description: PAD Drive Capacity Select + minItems: 1 + maxItems: 4 + + clocks: + maxItems: 1 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + '#gpio-cells': + description: + Specifies the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the pin number and flags, as defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + interrupts: + description: + One interrupt per each of the 5 GPIO ports supported by the controller, + sorted by port number ascending order. + minItems: 5 + maxItems: 5 + +patternProperties: + '-pins$': + type: object + patternProperties: + '^(.*-)?pinmux$': + type: object + description: + Pinctrl node's client devices specify pin muxes using subnodes, + which in turn use the standard properties below. + $ref: pinmux-node.yaml# + + properties: + groups: + description: + List of gpio pin groups affected by the functions specified in + this subnode. + items: + oneOf: + - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp, + rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp, + rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp, + i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp, + ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp, + ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, + dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp, + dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp, + spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp, + dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, + uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, + sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, + uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, + uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, + pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, + dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp, + nand_ceb3_mfp] + minItems: 1 + maxItems: 32 + + function: + description: + Specify the alternative function to be configured for the + given gpio pin groups. + enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0, + sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, + i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, + p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m, + mipi_csi, nand, spdif, ts, lcd0] + + required: + - groups + - function + + additionalProperties: false + + '^(.*-)?pinconf$': + type: object + description: + Pinctrl node's client devices specify pin configurations using + subnodes, which in turn use the standard properties below. + $ref: pincfg-node.yaml# + + properties: + groups: + description: + List of gpio pin groups affected by the drive-strength property + specified in this subnode. + items: + oneOf: + - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv, + rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv, + smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, + i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, + lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv, + sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv, + spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv, + i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, + sens0_ckout_drv, uart3_all_drv] + minItems: 1 + maxItems: 32 + + pins: + description: + List of gpio pins affected by the bias-pull-* and + input-schmitt-* properties specified in this subnode. + items: + oneOf: + - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen, + eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk, + eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, + i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, + i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1, + ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, + lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep, + lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp, + lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, + dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0, + dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, + sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, + spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, + uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk, + sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, + dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb, + uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk, + i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, + csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3, + csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3, + dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb, + dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1, + pkg2, pkg3] + minItems: 1 + maxItems: 64 + + bias-pull-up: true + bias-pull-down: true + + drive-strength: + description: + Selects the drive strength for the specified pins, in mA. + enum: [2, 4, 8, 12] + + input-schmitt-enable: true + input-schmitt-disable: true + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - gpio-controller + - gpio-ranges + - '#gpio-cells' + - interrupt-controller + - '#interrupt-cells' + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl: pinctrl@b01b0000 { + compatible = "actions,s500-pinctrl"; + reg = <0xb01b0000 0x40>, <0xb01b0040 0x10>, + <0xb01b0060 0x18>, <0xb01b0080 0xc>; + clocks = <&cmu 55>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 132>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + mmc0_pins: mmc0-pins { + pinmux { + groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp", + "sd0_cmd_mfp", "sd0_clk_mfp"; + function = "sd0"; + }; + + drv-pinconf { + groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv"; + drive-strength = <8>; + }; + + bias-pinconf { + pins = "sd0_d0", "sd0_d1", "sd0_d2", + "sd0_d3", "sd0_cmd"; + bias-pull-up; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index 7556be6e2754..5240487dfe50 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -48,6 +48,8 @@ properties: - allwinner,sun9i-a80-r-pinctrl - allwinner,sun50i-a64-pinctrl - allwinner,sun50i-a64-r-pinctrl + - allwinner,sun50i-a100-pinctrl + - allwinner,sun50i-a100-r-pinctrl - allwinner,sun50i-h5-pinctrl - allwinner,sun50i-h6-pinctrl - allwinner,sun50i-h6-r-pinctrl @@ -59,7 +61,7 @@ properties: interrupts: minItems: 1 - maxItems: 5 + maxItems: 7 description: One interrupt per external interrupt bank supported on the controller, sorted by bank number ascending order. @@ -147,6 +149,18 @@ allOf: properties: compatible: enum: + - allwinner,sun50i-a100-pinctrl + + then: + properties: + interrupts: + minItems: 7 + maxItems: 7 + + - if: + properties: + compatible: + enum: - allwinner,sun9i-a80-pinctrl then: @@ -155,62 +169,75 @@ allOf: minItems: 5 maxItems: 5 - else: - if: - properties: - compatible: - enum: - - allwinner,sun6i-a31-pinctrl - - allwinner,sun6i-a31s-pinctrl - - allwinner,sun50i-h6-pinctrl - - then: - properties: - interrupts: - minItems: 4 - maxItems: 4 - - else: - if: - properties: - compatible: - enum: - - allwinner,sun8i-a23-pinctrl - - allwinner,sun8i-a83t-pinctrl - - allwinner,sun50i-a64-pinctrl - - allwinner,sun50i-h5-pinctrl - - allwinner,suniv-f1c100s-pinctrl - - then: - properties: - interrupts: - minItems: 3 - maxItems: 3 - - else: - if: - properties: - compatible: - enum: - - allwinner,sun6i-a31-r-pinctrl - - allwinner,sun8i-a33-pinctrl - - allwinner,sun8i-h3-pinctrl - - allwinner,sun8i-v3-pinctrl - - allwinner,sun8i-v3s-pinctrl - - allwinner,sun9i-a80-r-pinctrl - - allwinner,sun50i-h6-r-pinctrl - - then: - properties: - interrupts: - minItems: 2 - maxItems: 2 - - else: - properties: - interrupts: - minItems: 1 - maxItems: 1 + - if: + properties: + compatible: + enum: + - allwinner,sun6i-a31-pinctrl + - allwinner,sun6i-a31s-pinctrl + - allwinner,sun50i-h6-pinctrl + + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + + - if: + properties: + compatible: + enum: + - allwinner,sun8i-a23-pinctrl + - allwinner,sun8i-a83t-pinctrl + - allwinner,sun50i-a64-pinctrl + - allwinner,sun50i-h5-pinctrl + - allwinner,suniv-f1c100s-pinctrl + + then: + properties: + interrupts: + minItems: 3 + maxItems: 3 + + - if: + properties: + compatible: + enum: + - allwinner,sun6i-a31-r-pinctrl + - allwinner,sun8i-a33-pinctrl + - allwinner,sun8i-h3-pinctrl + - allwinner,sun8i-v3-pinctrl + - allwinner,sun8i-v3s-pinctrl + - allwinner,sun9i-a80-r-pinctrl + - allwinner,sun50i-h6-r-pinctrl + + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + enum: + - allwinner,sun4i-a10-pinctrl + - allwinner,sun5i-a10s-pinctrl + - allwinner,sun5i-a13-pinctrl + - allwinner,sun7i-a20-pinctrl + - allwinner,sun8i-a23-r-pinctrl + - allwinner,sun8i-a83t-r-pinctrl + - allwinner,sun8i-h3-r-pinctrl + - allwinner,sun8i-r40-pinctrl + - allwinner,sun50i-a64-r-pinctrl + - allwinner,sun50i-a100-r-pinctrl + - nextthing,gr8-pinctrl + + then: + properties: + interrupts: + minItems: 1 + maxItems: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt index 04d16fb69eb7..265015bc0603 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt @@ -4,7 +4,9 @@ The Atmel PIO4 controller is used to select the function of a pin and to configure it. Required properties: -- compatible: "atmel,sama5d2-pinctrl". +- compatible: + "atmel,sama5d2-pinctrl" + "microchip,sama7g5-pinctrl" - reg: base address and length of the PIO controller. - interrupts: interrupt outputs from the controller, one for each bank. - interrupt-controller: mark the device node as an interrupt controller. diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml index 420d74856032..a07dd197176a 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml @@ -188,3 +188,5 @@ required: - gpio-ranges - pinctrl-0 - pinctrl-names + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml index 6bfc25d0e1b3..4cb174bf31ff 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml @@ -120,3 +120,5 @@ properties: required: - pinctrl-0 - pinctrl-names + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml index 13b7ab9dd6d5..71ed0a9def84 100644 --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml @@ -138,3 +138,5 @@ properties: and the delay before latching a value to an output pin. Typically indicates how many double-inverters are used to delay the signal. + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt index bf9b07016c87..fbdd1a716a1e 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt @@ -60,7 +60,7 @@ For example, pinctrl might have properties like the following: Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices. -SiRFatlas7's pinmux nodes act as a container for an abitrary number of subnodes. +SiRFatlas7's pinmux nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a group of pins. Required subnode-properties: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 205be98ae078..931a18cd1e23 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -10,6 +10,7 @@ Required properties: "mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl. "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl. "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl. + "mediatek,mt8167-pinctrl", compatible with mt8167 pinctrl. "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl. "mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl. - pins-are-numbered: Specify the subnodes are using numbered pinmux to diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml new file mode 100644 index 000000000000..5556def6b99b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8192.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT8192 Pin Controller + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +description: | + The Mediatek's Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8192-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: | + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + const: 2 + + gpio-ranges: + description: gpio valid number range. + maxItems: 1 + + reg: + description: | + Physical address base for gpio base registers. There are 11 GPIO + physical address base in mt8192. + maxItems: 11 + + reg-names: + description: | + Gpio base register names. + maxItems: 11 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: The interrupt outputs to sysirq. + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '^pins': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and + input schmitt. + An example of using macro: + pincontroller { + /* GPIO0 set as multifunction GPIO0 */ + state_0_node_a { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + }; + /* GPIO1 set as multifunction PWM */ + state_0_node_b { + pinmux = <PINMUX_GPIO1__FUNC_PWM_1>; + }; + }; + $ref: "pinmux-node.yaml" + + properties: + pinmux: + description: | + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + + drive-strength: + description: | + It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See + dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/mt8192-pinfunc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + pio: pinctrl@10005000 { + compatible = "mediatek,mt8192-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11c20000 0x1000>, + <0x11d10000 0x1000>, + <0x11d30000 0x1000>, + <0x11d40000 0x1000>, + <0x11e20000 0x1000>, + <0x11e70000 0x1000>, + <0x11ea0000 0x1000>, + <0x11f20000 0x1000>, + <0x11f30000 0x1000>, + <0x1000b000 0x1000>; + reg-names = "iocfg0", "iocfg_rm", "iocfg_bm", + "iocfg_bl", "iocfg_br", "iocfg_lm", + "iocfg_lb", "iocfg_rt", "iocfg_lt", + "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 220>; + interrupt-controller; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + + pins { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + output-low; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt index e705acd3612c..f903eb4471f8 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt @@ -94,16 +94,23 @@ pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as specified in the pinctrl-bindings.txt document in this directory. The pin configuration nodes for pinctrl-single are specified as pinctrl -register offset and value pairs using pinctrl-single,pins. Only the bits -specified in pinctrl-single,function-mask are updated. For example, setting -a pin for a device could be done with: +register offset and values using pinctrl-single,pins. Only the bits specified +in pinctrl-single,function-mask are updated. + +When #pinctrl-cells = 1, then setting a pin for a device could be done with: pinctrl-single,pins = <0xdc 0x118>; -Where 0xdc is the offset from the pinctrl register base address for the -device pinctrl register, and 0x118 contains the desired value of the -pinctrl register. See the device example and static board pins example -below for more information. +Where 0xdc is the offset from the pinctrl register base address for the device +pinctrl register, and 0x118 contains the desired value of the pinctrl register. + +When #pinctrl-cells = 2, then setting a pin for a device could be done with: + + pinctrl-single,pins = <0xdc 0x30 0x07>; + +Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value. +These two values are OR'd together to produce the value stored at offset 0xdc. +See the device example and static board pins example below for more information. In case when one register changes more than one pin's mux the pinctrl-single,bits need to be used which takes three parameters: diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml index ef8877ddb1eb..551df3d9b809 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml @@ -129,3 +129,5 @@ properties: pinctrl-pin-array: $ref: /schemas/types.yaml#/definitions/uint32-array + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt index 0861afeccfc9..97858a7c07a2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt @@ -26,7 +26,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". -The pin configuration nodes act as a container for an abitrary number of +The pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration can include the mux function to select on those pin(s)/group(s), and various pin configuration diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml new file mode 100644 index 000000000000..1f0f5757f9e1 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. MSM8226 TLMM block + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + MSM8226 platform. + +properties: + compatible: + const: qcom,msm8226-pinctrl + + reg: + description: Specifies the base address and size of the TLMM register space + maxItems: 1 + + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: Specifies the PIN numbers and Flags, as defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + + gpio-reserved-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. Functions are only valid for gpio pins. + enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, + blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, + blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8226-pinctrl"; + reg = <0xfd510000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&msmgpio 0 0 117>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + serial-pins { + pins = "gpio8", "gpio9"; + function = "blsp_uart3"; + drive-strength = <8>; + bias-disable; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt deleted file mode 100644 index d75476e24514..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ /dev/null @@ -1,188 +0,0 @@ -* Renesas Pin Function Controller (GPIO and Pin Mux/Config) - -The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH73A0, -R8A73A4 and R8A7740 it also acts as a GPIO controller. - - -Pin Control ------------ - -Required Properties: - - - compatible: should be one of the following. - - "renesas,pfc-emev2": for EMEV2 (EMMA Mobile EV2) compatible pin-controller. - - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller. - - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller. - - "renesas,pfc-r8a7742": for R8A7742 (RZ/G1H) compatible pin-controller. - - "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller. - - "renesas,pfc-r8a7744": for R8A7744 (RZ/G1N) compatible pin-controller. - - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller. - - "renesas,pfc-r8a77470": for R8A77470 (RZ/G1C) compatible pin-controller. - - "renesas,pfc-r8a774a1": for R8A774A1 (RZ/G2M) compatible pin-controller. - - "renesas,pfc-r8a774b1": for R8A774B1 (RZ/G2N) compatible pin-controller. - - "renesas,pfc-r8a774c0": for R8A774C0 (RZ/G2E) compatible pin-controller. - - "renesas,pfc-r8a774e1": for R8A774E1 (RZ/G2H) compatible pin-controller. - - "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller. - - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller. - - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller. - - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller. - - "renesas,pfc-r8a7792": for R8A7792 (R-Car V2H) compatible pin-controller. - - "renesas,pfc-r8a7793": for R8A7793 (R-Car M2-N) compatible pin-controller. - - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller. - - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller. - - "renesas,pfc-r8a7796": for R8A77960 (R-Car M3-W) compatible pin-controller. - - "renesas,pfc-r8a77961": for R8A77961 (R-Car M3-W+) compatible pin-controller. - - "renesas,pfc-r8a77965": for R8A77965 (R-Car M3-N) compatible pin-controller. - - "renesas,pfc-r8a77970": for R8A77970 (R-Car V3M) compatible pin-controller. - - "renesas,pfc-r8a77980": for R8A77980 (R-Car V3H) compatible pin-controller. - - "renesas,pfc-r8a77990": for R8A77990 (R-Car E3) compatible pin-controller. - - "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller. - - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller. - - - reg: Base address and length of each memory resource used by the pin - controller hardware module. - -Optional properties: - - - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden - otherwise. Should be 3. - - - interrupts-extended: Specify the interrupts associated with external - IRQ pins. This property is mandatory when the PFC handles GPIOs and - forbidden otherwise. When specified, it must contain one interrupt per - external IRQ, sorted by external IRQ number. - -The PFC node also acts as a container for pin configuration nodes. Please refer -to pinctrl-bindings.txt in this directory for the definition of the term "pin -configuration node" and for the common pinctrl bindings used by client devices. - -Each pin configuration node represents a desired configuration for a pin, a -pin group, or a list of pins or pin groups. The configuration can include the -function to select on those pin(s) and pin configuration parameters (such as -pull-up and pull-down). - -Pin configuration nodes contain pin configuration properties, either directly -or grouped in child subnodes. Both pin muxing and configuration parameters can -be grouped in that way and referenced as a single pin configuration node by -client devices. - -A configuration node or subnode must reference at least one pin (through the -pins or pin groups properties) and contain at least a function or one -configuration parameter. When the function is present only pin groups can be -used to reference pins. - -All pin configuration nodes and subnodes names are ignored. All of those nodes -are parsed through phandles and processed purely based on their content. - -Pin Configuration Node Properties: - -- pins : An array of strings, each string containing the name of a pin. -- groups : An array of strings, each string containing the name of a pin - group. - -- function: A string containing the name of the function to mux to the pin - group(s) specified by the groups property. - - Valid values for pin, group and function names can be found in the group and - function arrays of the PFC data file corresponding to the SoC - (drivers/pinctrl/sh-pfc/pfc-*.c) - -The pin configuration parameters use the generic pinconf bindings defined in -pinctrl-bindings.txt in this directory. The supported parameters are -bias-disable, bias-pull-up, bias-pull-down, drive-strength and power-source. For -pins that have a configurable I/O voltage, the power-source value should be the -nominal I/O voltage in millivolts. - - -GPIO ----- - -On SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller node. - -Required Properties: - - - gpio-controller: Marks the device node as a gpio controller. - - - #gpio-cells: Should be 2. The first cell is the GPIO number and the second - cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the - GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. - -The syntax of the gpio specifier used by client nodes should be the following -with values derived from the SoC user manual. - - <[phandle of the gpio controller node] - [pin number within the gpio controller] - [flags]> - -On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver. -Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml -for documentation of the GPIO device tree bindings on those platforms. - - -Examples --------- - -Example 1: SH73A0 (SH-Mobile AG5) pin controller node - - pfc: pin-controller@e6050000 { - compatible = "renesas,pfc-sh73a0"; - reg = <0xe6050000 0x8000>, - <0xe605801c 0x1c>; - gpio-controller; - #gpio-cells = <2>; - interrupts-extended = - <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, - <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, - <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, - <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, - <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, - <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, - <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, - <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; - }; - -Example 2: A GPIO LED node that references a GPIO - - #include <dt-bindings/gpio/gpio.h> - - leds { - compatible = "gpio-leds"; - led1 { - gpios = <&pfc 20 GPIO_ACTIVE_LOW>; - }; - }; - -Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps - for the MMCIF and SCIFA4 devices - - &pfc { - pinctrl-0 = <&scifa4_pins>; - pinctrl-names = "default"; - - mmcif_pins: mmcif { - mux { - groups = "mmc0_data8_0", "mmc0_ctrl_0"; - function = "mmc0"; - }; - cfg { - groups = "mmc0_data8_0"; - pins = "PORT279"; - bias-pull-up; - }; - }; - - scifa4_pins: scifa4 { - groups = "scifa4_data", "scifa4_ctrl"; - function = "scifa4"; - }; - }; - -Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device - - &mmcif { - pinctrl-0 = <&mmcif_pins>; - pinctrl-names = "default"; - - bus-width = <8>; - vmmc-supply = <®_1p8v>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml new file mode 100644 index 000000000000..5b5b1b9d2ec7 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,pfc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Pin Function Controller (GPIO and Pin Mux/Config) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The Pin Function Controller (PFC) is a Pin Mux/Config controller. + On SH/R-Mobile SoCs it also acts as a GPIO controller. + +properties: + compatible: + enum: + - renesas,pfc-emev2 # EMMA Mobile EV2 + - renesas,pfc-r8a73a4 # R-Mobile APE6 + - renesas,pfc-r8a7740 # R-Mobile A1 + - renesas,pfc-r8a7742 # RZ/G1H + - renesas,pfc-r8a7743 # RZ/G1M + - renesas,pfc-r8a7744 # RZ/G1N + - renesas,pfc-r8a7745 # RZ/G1E + - renesas,pfc-r8a77470 # RZ/G1C + - renesas,pfc-r8a774a1 # RZ/G2M + - renesas,pfc-r8a774b1 # RZ/G2N + - renesas,pfc-r8a774c0 # RZ/G2E + - renesas,pfc-r8a774e1 # RZ/G2H + - renesas,pfc-r8a7778 # R-Car M1 + - renesas,pfc-r8a7779 # R-Car H1 + - renesas,pfc-r8a7790 # R-Car H2 + - renesas,pfc-r8a7791 # R-Car M2-W + - renesas,pfc-r8a7792 # R-Car V2H + - renesas,pfc-r8a7793 # R-Car M2-N + - renesas,pfc-r8a7794 # R-Car E2 + - renesas,pfc-r8a7795 # R-Car H3 + - renesas,pfc-r8a7796 # R-Car M3-W + - renesas,pfc-r8a77961 # R-Car M3-W+ + - renesas,pfc-r8a77965 # R-Car M3-N + - renesas,pfc-r8a77970 # R-Car V3M + - renesas,pfc-r8a77980 # R-Car V3H + - renesas,pfc-r8a77990 # R-Car E3 + - renesas,pfc-r8a77995 # R-Car D3 + - renesas,pfc-sh73a0 # SH-Mobile AG5 + + reg: + minItems: 1 + maxItems: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + minItems: 1 + maxItems: 16 + + interrupts-extended: + minItems: 32 + maxItems: 64 + description: + Specify the interrupts associated with external IRQ pins on SoCs where + the PFC acts as a GPIO controller. It must contain one interrupt per + external IRQ, sorted by external IRQ number. + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + +if: + properties: + compatible: + items: + enum: + - renesas,pfc-r8a73a4 + - renesas,pfc-r8a7740 + - renesas,pfc-sh73a0 +then: + required: + - interrupts-extended + - gpio-controller + - '#gpio-cells' + - gpio-ranges + - power-domains + +additionalProperties: + anyOf: + - type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + Pin controller client devices use pin configuration subnodes (children + and grandchildren) for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + phandle: true + function: true + groups: true + pins: true + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: + enum: [ 3, 6, 9, 12, 15, 18, 21, 24 ] # Superset of supported values + power-source: + enum: [ 1800, 3300 ] + gpio-hog: true + gpios: true + input: true + output-high: true + output-low: true + + additionalProperties: false + + - type: object + properties: + phandle: true + + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + +examples: + - | + pfc: pinctrl@e6050000 { + compatible = "renesas,pfc-r8a7740"; + reg = <0xe6050000 0x8000>, + <0xe605800c 0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 0 212>; + interrupts-extended = + <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, + <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, + <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, + <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, + <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, + <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, + <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, + <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; + power-domains = <&pd_c5>; + + lcd0-mux-hog { + /* DBGMD/LCDC0/FSIA MUX */ + gpio-hog; + gpios = <176 0>; + output-high; + }; + }; + + - | + pinctrl@e6060000 { + compatible = "renesas,pfc-r8a7795"; + reg = <0xe6060000 0x50c>; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_mdio", "avb_mii"; + function = "avb"; + }; + + pins_mdio { + groups = "avb_mdio"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", + "PIN_AVB_TD0", "PIN_AVB_TD1", "PIN_AVB_TD2", + "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; + + keys_pins: keys { + pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1"; + bias-pull-up; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt deleted file mode 100644 index fd3696eb36bf..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt +++ /dev/null @@ -1,223 +0,0 @@ -Renesas RZ/A1 combined Pin and GPIO controller - -The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO controller, -named "Ports" in the hardware reference manual. -Pin multiplexing and GPIO configuration is performed on a per-pin basis -writing configuration values to per-port register sets. -Each "port" features up to 16 pins, each of them configurable for GPIO -function (port mode) or in alternate function mode. -Up to 8 different alternate function modes exist for each single pin. - -Pin controller node -------------------- - -Required properties: - - compatible: should be: - - "renesas,r7s72100-ports": for RZ/A1H - - "renesas,r7s72101-ports", "renesas,r7s72100-ports": for RZ/A1M - - "renesas,r7s72102-ports": for RZ/A1L - - - reg - address base and length of the memory area where the pin controller - hardware is mapped to. - -Example: -Pin controller node for RZ/A1H SoC (r7s72100) - -pinctrl: pin-controller@fcfe3000 { - compatible = "renesas,r7s72100-ports"; - - reg = <0xfcfe3000 0x4230>; -}; - -Sub-nodes ---------- - -The child nodes of the pin controller node describe a pin multiplexing -function or a GPIO controller alternatively. - -- Pin multiplexing sub-nodes: - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - A single sub-node may define several pin configurations. - A few alternate function require special pin configuration flags to be - supplied along with the alternate function configuration number. - The hardware reference manual specifies when a pin function requires - "software IO driven" mode to be specified. To do so use the generic - properties from the <include/linux/pinctrl/pinconf_generic.h> header file - to instruct the pin controller to perform the desired pin configuration - operation. - Please refer to pinctrl-bindings.txt to get to know more on generic - pin properties usage. - - The allowed generic formats for a pin multiplexing sub-node are the - following ones: - - node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - node-2 { - sub-node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - sub-node-2 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - ... - - sub-node-n { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - }; - - Use the second format when pins part of the same logical group need to have - different generic pin configuration flags applied. - - Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle - of the most external one. - - Eg. - - client-1 { - ... - pinctrl-0 = <&node-1>; - ... - }; - - client-2 { - ... - pinctrl-0 = <&node-2>; - ... - }; - - Required properties: - - pinmux: - integer array representing pin number and pin multiplexing configuration. - When a pin has to be configured in alternate function mode, use this - property to identify the pin by its global index, and provide its - alternate function configuration number along with it. - When multiple pins are required to be configured as part of the same - alternate function they shall be specified as members of the same - argument list of a single "pinmux" property. - Helper macros to ease assembling the pin index from its position - (port where it sits on and pin number) and alternate function identifier - are provided by the pin controller header file at: - <include/dt-bindings/pinctrl/r7s72100-pinctrl.h> - Integers values in "pinmux" argument list are assembled as: - ((PORT * 16 + PIN) | MUX_FUNC << 16) - - Optional generic properties: - - input-enable: - enable input bufer for pins requiring software driven IO input - operations. - - output-high: - enable output buffer for pins requiring software driven IO output - operations. output-low can be used alternatively, as line value is - ignored by the driver. - - The hardware reference manual specifies when a pin has to be configured to - work in bi-directional mode and when the IO direction has to be specified - by software. Bi-directional pins are managed by the pin controller driver - internally, while software driven IO direction has to be explicitly - selected when multiple options are available. - - Example: - A serial communication interface with a TX output pin and an RX input pin. - - &pinctrl { - scif2_pins: serial2 { - pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; - }; - }; - - Pin #0 on port #3 is configured as alternate function #6. - Pin #2 on port #3 is configured as alternate function #4. - - Example 2: - I2c master: both SDA and SCL pins need bi-directional operations - - &pinctrl { - i2c2_pins: i2c2 { - pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; - }; - }; - - Pin #4 on port #1 is configured as alternate function #1. - Pin #5 on port #1 is configured as alternate function #1. - Both need to work in bi-directional mode, the driver manages this internally. - - Example 3: - Multi-function timer input and output compare pins. - Configure TIOC0A as software driven input and TIOC0B as software driven - output. - - &pinctrl { - tioc0_pins: tioc0 { - tioc0_input_pins { - pinumx = <RZA1_PINMUX(4, 0, 2)>; - input-enable; - }; - - tioc0_output_pins { - pinmux = <RZA1_PINMUX(4, 1, 1)>; - output-enable; - }; - }; - }; - - &tioc0 { - ... - pinctrl-0 = <&tioc0_pins>; - ... - }; - - Pin #0 on port #4 is configured as alternate function #2 with IO direction - specified by software as input. - Pin #1 on port #4 is configured as alternate function #1 with IO direction - specified by software as output. - -- GPIO controller sub-nodes: - Each port of the r7s72100 pin controller hardware is itself a GPIO controller. - Different SoCs have different numbers of available pins per port, but - generally speaking, each of them can be configured in GPIO ("port") mode - on this hardware. - Describe GPIO controllers using sub-nodes with the following properties. - - Required properties: - - gpio-controller - empty property as defined by the GPIO bindings documentation. - - #gpio-cells - number of cells required to identify and configure a GPIO. - Shall be 2. - - gpio-ranges - Describes a GPIO controller specifying its specific pin base, the pin - base in the global pin numbering space, and the number of controlled - pins, as defined by the GPIO bindings documentation. Refer to - Documentation/devicetree/bindings/gpio/gpio.txt file for a more detailed - description. - - Example: - A GPIO controller node, controlling 16 pins indexed from 0. - The GPIO controller base in the global pin indexing space is pin 48, thus - pins [0 - 15] on this controller map to pins [48 - 63] in the global pin - indexing space. - - port3: gpio-3 { - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - A device node willing to use pins controlled by this GPIO controller, shall - refer to it as follows: - - led1 { - gpios = <&port3 10 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml new file mode 100644 index 000000000000..7f80578dc229 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rza1-ports.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/A1 combined Pin and GPIO controller + +maintainers: + - Jacopo Mondi <jacopo+renesas@jmondi.org> + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO + controller, named "Ports" in the hardware reference manual. + Pin multiplexing and GPIO configuration is performed on a per-pin basis + writing configuration values to per-port register sets. + Each "port" features up to 16 pins, each of them configurable for GPIO + function (port mode) or in alternate function mode. + Up to 8 different alternate function modes exist for each single pin. + +properties: + compatible: + oneOf: + - const: renesas,r7s72100-ports # RZ/A1H + - items: + - const: renesas,r7s72101-ports # RZ/A1M + - const: renesas,r7s72100-ports # fallback + - const: renesas,r7s72102-ports # RZ/A1L + + reg: + maxItems: 1 + +required: + - compatible + - reg + +patternProperties: + "^gpio-[0-9]*$": + type: object + + description: + Each port of the r7s72100 pin controller hardware is itself a GPIO + controller. + Different SoCs have different numbers of available pins per port, but + generally speaking, each of them can be configured in GPIO ("port") mode + on this hardware. + Describe GPIO controllers using sub-nodes with the following properties. + + properties: + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + maxItems: 1 + + required: + - gpio-controller + - '#gpio-cells' + - gpio-ranges + + +additionalProperties: + anyOf: + - type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + A pin multiplexing sub-node describes how to configure a set of (or a + single) pin in some desired alternate function mode. + A single sub-node may define several pin configurations. + A few alternate function require special pin configuration flags to be + supplied along with the alternate function configuration number. + The hardware reference manual specifies when a pin function requires + "software IO driven" mode to be specified. To do so use the generic + properties from the <include/linux/pinctrl/pinconf_generic.h> header + file to instruct the pin controller to perform the desired pin + configuration operation. + The hardware reference manual specifies when a pin has to be configured + to work in bi-directional mode and when the IO direction has to be + specified by software. Bi-directional pins must be managed by the pin + controller driver internally, while software driven IO direction has to + be explicitly selected when multiple options are available. + + properties: + pinmux: + description: | + Integer array representing pin number and pin multiplexing + configuration. + When a pin has to be configured in alternate function mode, use + this property to identify the pin by its global index, and provide + its alternate function configuration number along with it. + When multiple pins are required to be configured as part of the + same alternate function they shall be specified as members of the + same argument list of a single "pinmux" property. + Helper macros to ease assembling the pin index from its position + (port where it sits on and pin number) and alternate function + identifier are provided by the pin controller header file at: + <include/dt-bindings/pinctrl/r7s72100-pinctrl.h> + Integers values in "pinmux" argument list are assembled as: + ((PORT * 16 + PIN) | MUX_FUNC << 16) + + phandle: true + input-enable: true + output-enable: true + + required: + - pinmux + + additionalProperties: false + + - type: object + properties: + phandle: true + + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + +examples: + - | + #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> + pinctrl: pinctrl@fcfe3000 { + compatible = "renesas,r7s72100-ports"; + + reg = <0xfcfe3000 0x4230>; + + /* + * A GPIO controller node, controlling 16 pins indexed from 0. + * The GPIO controller base in the global pin indexing space is pin + * 48, thus pins [0 - 15] on this controller map to pins [48 - 63] + * in the global pin indexing space. + */ + port3: gpio-3 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + /* + * A serial communication interface with a TX output pin and an RX + * input pin. + * Pin #0 on port #3 is configured as alternate function #6. + * Pin #2 on port #3 is configured as alternate function #4. + */ + scif2_pins: serial2 { + pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; + }; + + + /* + * I2c master: both SDA and SCL pins need bi-directional operations + * Pin #4 on port #1 is configured as alternate function #1. + * Pin #5 on port #1 is configured as alternate function #1. + * Both need to work in bi-directional mode, the driver must manage + * this internally. + */ + i2c2_pins: i2c2 { + pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; + }; + + + /* + * Multi-function timer input and output compare pins. + */ + tioc0_pins: tioc0 { + /* + * Configure TIOC0A as software driven input + * Pin #0 on port #4 is configured as alternate function #2 + * with IO direction specified by software as input. + */ + tioc0_input_pins { + pinmux = <RZA1_PINMUX(4, 0, 2)>; + input-enable; + }; + + /* + * Configure TIOC0B as software driven output + * Pin #1 on port #4 is configured as alternate function #1 + * with IO direction specified by software as output. + */ + tioc0_output_pins { + pinmux = <RZA1_PINMUX(4, 1, 1)>; + output-enable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml index b7911a994f3a..ce1f7343788f 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -84,7 +84,7 @@ additionalProperties: false examples: - | #include <dt-bindings/pinctrl/r7s9210-pinctrl.h> - pinctrl: pin-controller@fcffe000 { + pinctrl: pinctrl@fcffe000 { compatible = "renesas,r7s9210-pinctrl"; reg = <0xfcffe000 0x1000>; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt deleted file mode 100644 index 25e53acd523e..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt +++ /dev/null @@ -1,153 +0,0 @@ -Renesas RZ/N1 SoC Pinctrl node description. - -Pin controller node -------------------- -Required properties: -- compatible: SoC-specific compatible string "renesas,<soc-specific>-pinctrl" - followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific compatible - strings must be one of: - "renesas,r9a06g032-pinctrl" for RZ/N1D - "renesas,r9a06g033-pinctrl" for RZ/N1S -- reg: Address base and length of the memory area where the pin controller - hardware is mapped to. -- clocks: phandle for the clock, see the description of clock-names below. -- clock-names: Contains the name of the clock: - "bus", the bus clock, sometimes described as pclk, for register accesses. - -Example: - pinctrl: pin-controller@40067000 { - compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; - reg = <0x40067000 0x1000>, <0x51000000 0x480>; - clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>; - clock-names = "bus"; - }; - -Sub-nodes ---------- - -The child nodes of the pin controller node describe a pin multiplexing -function. - -- Pin multiplexing sub-nodes: - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - A single sub-node may define several pin configurations. - Please refer to pinctrl-bindings.txt to get to know more on generic - pin properties usage. - - The allowed generic formats for a pin multiplexing sub-node are the - following ones: - - node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - node-2 { - sub-node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - sub-node-2 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - ... - - sub-node-n { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - }; - - node-3 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - - sub-node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - ... - - sub-node-n { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - }; - - Use the latter two formats when pins part of the same logical group need to - have different generic pin configuration flags applied. Note that the generic - pinconfig in node-3 does not apply to the sub-nodes. - - Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle - of the most external one. - - Eg. - - client-1 { - ... - pinctrl-0 = <&node-1>; - ... - }; - - client-2 { - ... - pinctrl-0 = <&node-2>; - ... - }; - - Required properties: - - pinmux: - integer array representing pin number and pin multiplexing configuration. - When a pin has to be configured in alternate function mode, use this - property to identify the pin by its global index, and provide its - alternate function configuration number along with it. - When multiple pins are required to be configured as part of the same - alternate function they shall be specified as members of the same - argument list of a single "pinmux" property. - Integers values in the "pinmux" argument list are assembled as: - (PIN | MUX_FUNC << 8) - where PIN directly corresponds to the pl_gpio pin number and MUX_FUNC is - one of the alternate function identifiers defined in: - <include/dt-bindings/pinctrl/rzn1-pinctrl.h> - These identifiers collapse the IO Multiplex Configuration Level 1 and - Level 2 numbers that are detailed in the hardware reference manual into a - single number. The identifiers for Level 2 are simply offset by 10. - Additional identifiers are provided to specify the MDIO source peripheral. - - Optional generic pinconf properties: - - bias-disable - disable any pin bias - - bias-pull-up - pull up the pin with 50 KOhm - - bias-pull-down - pull down the pin with 50 KOhm - - bias-high-impedance - high impedance mode - - drive-strength - sink or source at most 4, 6, 8 or 12 mA - - Example: - A serial communication interface with a TX output pin and an RX input pin. - - &pinctrl { - pins_uart0: pins_uart0 { - pinmux = < - RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */ - RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */ - >; - }; - }; - - Example 2: - Here we set the pull up on the RXD pin of the UART. - - &pinctrl { - pins_uart0: pins_uart0 { - pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>; /* TXD */ - - pins_uart6_rx { - pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>; /* RXD */ - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml new file mode 100644 index 000000000000..4a43af0d6e02 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rzn1-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 Pin Controller + +maintainers: + - Gareth Williams <gareth.williams.jx@renesas.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + compatible: + items: + - enum: + - renesas,r9a06g032-pinctrl # RZ/N1D + - renesas,r9a06g033-pinctrl # RZ/N1S + - const: renesas,rzn1-pinctrl # Generic RZ/N1 + + reg: + items: + - description: GPIO Multiplexing Level1 Register Block + - description: GPIO Multiplexing Level2 Register Block + + clocks: + maxItems: 1 + + clock-names: + const: bus + description: + The bus clock, sometimes described as pclk, for register accesses. + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: + anyOf: + - type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + A pin multiplexing sub-node describes how to configure a set of (or a + single) pin in some desired alternate function mode. + A single sub-node may define several pin configurations. + + properties: + pinmux: + description: | + Integer array representing pin number and pin multiplexing + configuration. + When a pin has to be configured in alternate function mode, use + this property to identify the pin by its global index, and provide + its alternate function configuration number along with it. + When multiple pins are required to be configured as part of the + same alternate function they shall be specified as members of the + same argument list of a single "pinmux" property. + Integers values in the "pinmux" argument list are assembled as: + (PIN | MUX_FUNC << 8) + where PIN directly corresponds to the pl_gpio pin number and + MUX_FUNC is one of the alternate function identifiers defined in: + <include/dt-bindings/pinctrl/rzn1-pinctrl.h> + These identifiers collapse the IO Multiplex Configuration Level 1 + and Level 2 numbers that are detailed in the hardware reference + manual into a single number. The identifiers for Level 2 are simply + offset by 10. Additional identifiers are provided to specify the + MDIO source peripheral. + + phandle: true + bias-disable: true + bias-pull-up: + description: Pull up the pin with 50 kOhm + bias-pull-down: + description: Pull down the pin with 50 kOhm + bias-high-impedance: true + drive-strength: + enum: [ 4, 6, 8, 12 ] + + required: + - pinmux + + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + + - type: object + properties: + phandle: true + + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + +examples: + - | + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + #include <dt-bindings/pinctrl/rzn1-pinctrl.h> + pinctrl: pinctrl@40067000 { + compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; + reg = <0x40067000 0x1000>, <0x51000000 0x480>; + clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>; + clock-names = "bus"; + + /* + * A serial communication interface with a TX output pin and an RX + * input pin. + */ + pins_uart0: pins_uart0 { + pinmux = < + RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */ + RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */ + >; + }; + + /* + * Set the pull-up on the RXD pin of the UART. + */ + pins_uart0_alt: pins_uart0_alt { + pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>; + + pins_uart6_rx { + pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 70659c917bdc..7734ab6fec44 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -65,7 +65,7 @@ Required Properties: - Pin mux/config groups as child nodes: The pin mux (selecting pin function mode) and pin config (pull up/down, driver strength) settings are represented - as child nodes of the pin-controller node. There should be atleast one + as child nodes of the pin-controller node. There should be at least one child node and there is no limit on the count of these child nodes. It is also possible for a child node to consist of several further child nodes to allow grouping multiple pinctrl groups into one. The format of second @@ -75,7 +75,7 @@ Required Properties: The child node should contain a list of pin(s) on which a particular pin function selection or pin configuration (or both) have to applied. This list of pins is specified using the property name "samsung,pins". There - should be atleast one pin specfied for this property and there is no upper + should be at least one pin specified for this property and there is no upper limit on the count of pins that can be specified. The pins are specified using pin names which are derived from the hardware manual of the SoC. As an example, the pins in GPA0 bank of the pin controller can be represented @@ -107,7 +107,7 @@ Required Properties: hardware manual and these values are programmed as-is into the pin pull up/down and driver strength register of the pin-controller. - Note: A child should include atleast a pin function selection property or + Note: A child should include at least a pin function selection property or pin configuration property (one or more) or both. The client nodes that require a particular pin function selection and/or diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml index f8a93d8680f9..502480a19f49 100644 --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -28,6 +28,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | // The UniPhier pinctrl should be a subnode of a "syscon" compatible node. diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml new file mode 100644 index 000000000000..d0d1a01140ea --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/toshiba,visconti-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba Visconti TMPV770x pin mux/config controller + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + +description: + Toshiba's Visconti ARM SoC a pin mux/config controller. + +properties: + compatible: + enum: + - toshiba,tmpv7708-pinctrl + + reg: + maxItems: 1 + +required: + - compatible + - reg + +patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength. + $ref: "pinmux-node.yaml" + + properties: + function: + description: + Function to mux. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8, + spi0, spi1, spi2, spi3, spi4, spi5, spi6, + uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] + + groups: + description: + Name of the pin group to use for the functions. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, + i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, + spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, + spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, + uart0_grp, uart1_grp, uart2_grp, uart3_grp, + pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, + pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, + pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, + pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, + pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, + pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] + + drive-strength: + enum: [2, 4, 6, 8, 16, 24, 32] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-up: true + + bias-pull-down: true + + bias-disable: true + +additionalProperties: false + +examples: + # Pinmux controller node + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + pmux: pmux@24190000 { + compatible = "toshiba,tmpv7708-pinctrl"; + reg = <0 0x24190000 0 0x10000>; + + spi0_pins: spi0-pins { + function = "spi0"; + groups = "spi0_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml index bc4e037f3f73..5dae04d2936c 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml @@ -27,6 +27,8 @@ required: - compatible - "#power-domain-cells" +additionalProperties: false + examples: - | secure-monitor { diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml index dfba1af9abe5..6a12efdf436a 100644 --- a/Documentation/devicetree/bindings/power/domain-idle-state.yaml +++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml @@ -50,6 +50,8 @@ patternProperties: - exit-latency-us - min-residency-us +additionalProperties: false + examples: - | diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml index bde09a0b2da3..a96e6dbf1858 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml @@ -33,6 +33,10 @@ properties: interrupts: maxItems: 1 + interrupt-controller: true + '#interrupt-cells': + const: 3 + pgc: type: object description: list of power domains provided by this controller. diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml index ccdeaece169e..be447ccfdcb8 100644 --- a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml +++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | cpc@1bde0000 { diff --git a/Documentation/devicetree/bindings/power/pd-samsung.yaml b/Documentation/devicetree/bindings/power/pd-samsung.yaml index 09bdd96c1ec1..9c2c51133457 100644 --- a/Documentation/devicetree/bindings/power/pd-samsung.yaml +++ b/Documentation/devicetree/bindings/power/pd-samsung.yaml @@ -49,6 +49,8 @@ required: - "#power-domain-cells" - reg +unevaluatedProperties: false + examples: - | lcd0_pd: power-domain@10023c80 { diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index dd564349aa53..aed51e9dcb11 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -69,6 +69,8 @@ properties: required: - "#power-domain-cells" +additionalProperties: true + examples: - | power: power-controller@12340000 { diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt index 1b4213eb3473..4d530d815484 100644 --- a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt +++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt @@ -1,10 +1,13 @@ Microsemi Ocelot reset controller The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the -SoC MIPS core. +SoC core. + +The reset registers are both present in the MSCC vcoreiii MIPS and +microchip Sparx5 armv8 SoC's. Required Properties: - - compatible: "mscc,ocelot-chip-reset" + - compatible: "mscc,ocelot-chip-reset" or "microchip,sparx5-chip-reset" Example: reset@1070008 { diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/reboot-mode.txt deleted file mode 100644 index de34f27d509e..000000000000 --- a/Documentation/devicetree/bindings/power/reset/reboot-mode.txt +++ /dev/null @@ -1,25 +0,0 @@ -Generic reboot mode core map driver - -This driver get reboot mode arguments and call the write -interface to store the magic value in special register -or ram. Then the bootloader can read it and take different -action according to the argument stored. - -All mode properties are vendor specific, it is a indication to tell -the bootloader what to do when the system reboots, and should be named -as mode-xxx = <magic> (xxx is mode name, magic should be a none-zero value). - -For example modes common on Android platform: -- mode-normal: Normal reboot mode, system reboot with command "reboot". -- mode-recovery: Android Recovery mode, it is a mode to format the device or update a new image. -- mode-bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device. -- mode-loader: A bootloader mode, it's a mode used to download image on Rockchip platform, - usually used in development. - -Example: - reboot-mode { - mode-normal = <BOOT_NORMAL>; - mode-recovery = <BOOT_RECOVERY>; - mode-bootloader = <BOOT_FASTBOOT>; - mode-loader = <BOOT_BL_DOWNLOAD>; - } diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml new file mode 100644 index 000000000000..a6c91026d4cc --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/reboot-mode.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic reboot mode core map + +maintainers: + - Andy Yan <andy.yan@rock-chips.com> + +description: | + This driver get reboot mode arguments and call the write + interface to store the magic value in special register + or ram. Then the bootloader can read it and take different + action according to the argument stored. + + All mode properties are vendor specific, it is a indication to tell + the bootloader what to do when the system reboots, and should be named + as mode-xxx = <magic> (xxx is mode name, magic should be a non-zero value). + + For example, modes common Android platform are: + - normal: Normal reboot mode, system reboot with command "reboot". + - recovery: Android Recovery mode, it is a mode to format the device or update a new image. + - bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device. + - loader: A bootloader mode, it's a mode used to download image on Rockchip platform, + usually used in development. + +properties: + mode-normal: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Default value to set on a reboot if no command was provided. + +patternProperties: + "^mode-.*$": + $ref: /schemas/types.yaml#/definitions/uint32 + +examples: + - | + reboot-mode { + mode-normal = <0>; + mode-recovery = <1>; + mode-bootloader = <2>; + mode-loader = <3>; + }; +... diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt index c7dfb7cecf40..cb737a9e1f16 100644 --- a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt +++ b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt @@ -33,7 +33,7 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; interrupt-parent = <&pioA>; - interrupts = <45 GPIO_ACTIVE_LOW>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml index 932b736ce5c0..0c7e2e44793b 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml @@ -82,6 +82,27 @@ properties: An array containing the temperature in degree Celsius, for each of the battery capacity lookup table. + operating-range-celsius: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: operating temperature range of a battery + items: + - description: minimum temperature at which battery can operate + - description: maximum temperature at which battery can operate + + ambient-celsius: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: safe range of ambient temperature + items: + - description: alert when ambient temperature is lower than this value + - description: alert when ambient temperature is higher than this value + + alert-celsius: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: safe range of battery temperature + items: + - description: alert when battery temperature is lower than this value + - description: alert when battery temperature is higher than this value + required: - compatible @@ -130,6 +151,9 @@ examples: /* table for 10 degree Celsius */ ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>; resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>; + operating-range-celsius = <(-30) 50>; + ambient-celsius = <(-5) 50>; + alert-celsius = <0 40>; }; charger@11 { diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt index 3b4c69a7fa70..805040c6fff9 100644 --- a/Documentation/devicetree/bindings/power/supply/bq25890.txt +++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt @@ -33,6 +33,10 @@ Optional properties: - ti,thermal-regulation-threshold: integer, temperature above which the charge current is lowered, to avoid overheating (in degrees Celsius). If omitted, the default setting will be used (120 degrees); +- ti,ibatcomp-micro-ohms: integer, value of a resistor in series with + the battery; +- ti,ibatcomp-clamp-microvolt: integer, maximum charging voltage adjustment due + to expected voltage drop on in-series resistor; Example: diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml new file mode 100644 index 000000000000..f6b3dd4093ca --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/bq25980.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI BQ25980 Flash Charger + +maintainers: + - Dan Murphy <dmurphy@ti.com> + - Ricardo Rivera-Matos <r-rivera-matos@ti.com> + +description: | + The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended + for use in high-power density portable electronics. These inductorless + switching chargers can provide over 97% efficiency by making use of the + switched capacitor architecture. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - ti,bq25980 + - ti,bq25975 + - ti,bq25960 + + reg: + maxItems: 1 + + ti,watchdog-timeout-ms: + description: | + Watchdog timer in milli seconds. 0 disables the watchdog. + default: 0 + minimum: 0 + maximum: 300000 + enum: [ 0, 5000, 10000, 50000, 300000] + + ti,sc-ovp-limit-microvolt: + description: | + Minimum input voltage limit in micro volts with a when the charger is in + switch cap mode. 100000 micro volt step. + default: 17800000 + minimum: 14000000 + maximum: 22000000 + + ti,sc-ocp-limit-microamp: + description: | + Maximum input current limit in micro amps with a 100000 micro amp step. + minimum: 100000 + maximum: 3300000 + + ti,bypass-ovp-limit-microvolt: + description: | + Minimum input voltage limit in micro volts with a when the charger is in + switch cap mode. 50000 micro volt step. + minimum: 7000000 + maximum: 12750000 + + ti,bypass-ocp-limit-microamp: + description: | + Maximum input current limit in micro amps with a 100000 micro amp step. + minimum: 100000 + maximum: 3300000 + + ti,bypass-enable: + type: boolean + description: Enables bypass mode at boot time + + interrupts: + description: | + Indicates that the device state has changed. + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the battery node being monitored + +required: + - compatible + - reg + - monitored-battery + +unevaluatedProperties: false + +examples: + - | + bat: battery { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <4000000>; + constant-charge-voltage-max-microvolt = <8400000>; + precharge-current-microamp = <160000>; + charge-term-current-microamp = <160000>; + }; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + bq25980: charger@65 { + compatible = "ti,bq25980"; + reg = <0x65>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,watchdog-timer = <0>; + ti,sc-ocp-limit-microamp = <2000000>; + ti,sc-ovp-limit-microvolt = <17800000>; + monitored-battery = <&bat>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml index 82f682705f44..45beefccf31a 100644 --- a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml @@ -51,6 +51,7 @@ properties: - ti,bq27621 - ti,bq27z561 - ti,bq28z610 + - ti,bq34z100 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.txt b/Documentation/devicetree/bindings/power/supply/charger-manager.txt index ec4fe9de3137..b5ae9061b7a0 100644 --- a/Documentation/devicetree/bindings/power/supply/charger-manager.txt +++ b/Documentation/devicetree/bindings/power/supply/charger-manager.txt @@ -3,24 +3,32 @@ charger-manager bindings Required properties : - compatible : "charger-manager" - - <>-supply : for regulator consumer - - cm-num-chargers : number of chargers + - <>-supply : for regulator consumer, named according to cm-regulator-name - cm-chargers : name of chargers - cm-fuel-gauge : name of battery fuel gauge - subnode <regulator> : - cm-regulator-name : name of charger regulator - subnode <cable> : - - cm-cable-name : name of charger cable + - cm-cable-name : name of charger cable - one of USB, USB-HOST, + SDP, DCP, CDP, ACA, FAST-CHARGER, SLOW-CHARGER, WPT, + PD, DOCK, JIG, or MECHANICAL - cm-cable-extcon : name of extcon dev (optional) - cm-cable-min : minimum current of cable (optional) - cm-cable-max : maximum current of cable Optional properties : - cm-name : charger manager's name (default : "battery") - - cm-poll-mode : polling mode (enum polling_modes) - - cm-poll-interval : polling interval - - cm-battery-stat : battery status (enum data_source) - - cm-fullbatt-* : data for full battery checking + - cm-poll-mode : polling mode - 0 for disabled, 1 for always, 2 for when + external power is connected, or 3 for when charging. If not present, + then polling is disabled + - cm-poll-interval : polling interval (in ms) + - cm-battery-stat : battery status - 0 for battery always present, 1 for no + battery, 2 to check presence via fuel gauge, or 3 to check presence + via charger + - cm-fullbatt-vchkdrop-volt : voltage drop (in uV) before restarting charging + - cm-fullbatt-voltage : voltage (in uV) of full battery + - cm-fullbatt-soc : state of charge to consider as full battery + - cm-fullbatt-capacity : capcity (in uAh) to consider as full battery - cm-thermal-zone : name of external thermometer's thermal zone - cm-battery-* : threshold battery temperature for charging -cold : critical cold temperature of battery for charging @@ -29,6 +37,10 @@ Optional properties : -temp-diff : temperature difference to allow recharging - cm-dis/charging-max = limits of charging duration +Deprecated properties: + - cm-num-chargers + - cm-fullbatt-vchkdrop-ms + Example : charger-manager@0 { compatible = "charger-manager"; @@ -39,13 +51,11 @@ Example : cm-poll-mode = <1>; cm-poll-interval = <30000>; - cm-fullbatt-vchkdrop-ms = <30000>; cm-fullbatt-vchkdrop-volt = <150000>; cm-fullbatt-soc = <100>; cm-battery-stat = <3>; - cm-num-chargers = <3>; cm-chargers = "charger0", "charger1", "charger2"; cm-fuel-gauge = "fuelgauge0"; @@ -71,7 +81,7 @@ Example : cm-cable-max = <500000>; }; cable@1 { - cm-cable-name = "TA"; + cm-cable-name = "SDP"; cm-cable-extcon = "extcon-dev.0"; cm-cable-min = <650000>; cm-cable-max = <675000>; diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml index 2036977ecc2f..ee92e6a076ac 100644 --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -52,6 +52,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml index 6244b8ee9402..89f8e2bcb2d7 100644 --- a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml @@ -39,6 +39,25 @@ properties: maxItems: 1 description: GPIO indicating the charging status + charge-current-limit-gpios: + minItems: 1 + maxItems: 32 + description: GPIOs used for current limiting + + charge-current-limit-mapping: + description: List of tuples with current in uA and a GPIO bitmap (in + this order). The tuples must be provided in descending order of the + current limit. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: + Current limit in uA + - description: + Encoded GPIO setting. Bit 0 represents last GPIO from the + charge-current-limit-gpios property. Bit 1 second to last + GPIO and so on. + required: - compatible @@ -47,6 +66,12 @@ anyOf: - gpios - required: - charge-status-gpios + - required: + - charge-current-limit-gpios + +dependencies: + charge-current-limit-gpios: [ charge-current-limit-mapping ] + charge-current-limit-mapping: [ charge-current-limit-gpios ] additionalProperties: false @@ -60,4 +85,10 @@ examples: gpios = <&gpd 28 GPIO_ACTIVE_LOW>; charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>; + + charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>, + <&gpioA 12 GPIO_ACTIVE_HIGH>; + charge-current-limit-mapping = <2500000 0x00>, // 2.5 A => both GPIOs low + <700000 0x01>, // 700 mA => GPIO A.12 high + <0 0x02>; // 0 mA => GPIO A.11 high }; diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt b/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt deleted file mode 100644 index 66430bf73815..000000000000 --- a/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Ingenic JZ47xx battery bindings - -Required properties: - -- compatible: Must be "ingenic,jz4740-battery". -- io-channels: phandle and IIO specifier pair to the IIO device. - Format described in iio-bindings.txt. -- monitored-battery: phandle to a "simple-battery" compatible node. - -The "monitored-battery" property must be a phandle to a node using the format -described in battery.txt, with the following properties being required: - -- voltage-min-design-microvolt: Drained battery voltage. -- voltage-max-design-microvolt: Fully charged battery voltage. - -Example: - -#include <dt-bindings/iio/adc/ingenic,adc.h> - -simple_battery: battery { - compatible = "simple-battery"; - voltage-min-design-microvolt = <3600000>; - voltage-max-design-microvolt = <4200000>; -}; - -ingenic_battery { - compatible = "ingenic,jz4740-battery"; - io-channels = <&adc INGENIC_ADC_BATTERY>; - io-channel-names = "battery"; - monitored-battery = <&simple_battery>; -}; diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml new file mode 100644 index 000000000000..867e3e6b7e80 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019-2020 Artur Rojek +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Ingenic JZ47xx battery bindings + +maintainers: + - Artur Rojek <contact@artur-rojek.eu> + +properties: + compatible: + oneOf: + - const: ingenic,jz4740-battery + - items: + - enum: + - ingenic,jz4725b-battery + - ingenic,jz4770-battery + - const: ingenic,jz4740-battery + + io-channels: + maxItems: 1 + + io-channel-names: + const: battery + + monitored-battery: + description: > + phandle to a "simple-battery" compatible node. + + This property must be a phandle to a node using the format described + in battery.yaml, with the following properties being required: + - voltage-min-design-microvolt: drained battery voltage, + - voltage-max-design-microvolt: fully charged battery voltage. + +required: + - compatible + - io-channels + - io-channel-names + - monitored-battery + +additionalProperties: false + +examples: + - | + #include <dt-bindings/iio/adc/ingenic,adc.h> + + simple_battery: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3600000>; + voltage-max-design-microvolt = <4200000>; + }; + + ingenic-battery { + compatible = "ingenic,jz4740-battery"; + io-channels = <&adc INGENIC_ADC_BATTERY>; + io-channel-names = "battery"; + monitored-battery = <&simple_battery>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/max17040_battery.txt b/Documentation/devicetree/bindings/power/supply/max17040_battery.txt index 4e0186b8380f..c802f664b508 100644 --- a/Documentation/devicetree/bindings/power/supply/max17040_battery.txt +++ b/Documentation/devicetree/bindings/power/supply/max17040_battery.txt @@ -2,7 +2,9 @@ max17040_battery ~~~~~~~~~~~~~~~~ Required properties : - - compatible : "maxim,max17040" or "maxim,max77836-battery" + - compatible : "maxim,max17040", "maxim,max17041", "maxim,max17043", + "maxim,max17044", "maxim,max17048", "maxim,max17049", + "maxim,max17058", "maxim,max17059" or "maxim,max77836-battery" - reg: i2c slave address Optional properties : @@ -11,6 +13,15 @@ Optional properties : generated. Can be configured from 1 up to 32 (%). If skipped the power up default value of 4 (%) will be used. +- maxim,double-soc : Certain devices return double the capacity. + Specify this boolean property to divide the + reported value in 2 and thus normalize it. + SOC == State of Charge == Capacity. +- maxim,rcomp : A value to compensate readings for various + battery chemistries and operating temperatures. + max17040,41 have 2 byte rcomp, default to + 0x97 0x00. All other devices have one byte + rcomp, default to 0x97. - interrupts : Interrupt line see Documentation/devicetree/ bindings/interrupt-controller/interrupts.txt - wakeup-source : This device has wakeup capabilities. Use this @@ -31,3 +42,11 @@ Example: interrupts = <2 IRQ_TYPE_EDGE_FALLING>; wakeup-source; }; + + battery-fuel-gauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + maxim,rcomp = /bits/ 8 <0x56>; + maxim,alert-low-soc-level = <10>; + maxim,double-soc; + }; diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml index 3bb02bb3a2d8..c5c55f627251 100644 --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml @@ -16,6 +16,8 @@ properties: This property is added to a supply in order to list the devices which supply it power, referenced by their phandles. +additionalProperties: true + examples: - | power { diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml index 7e0f73a898c7..9852d2febf65 100644 --- a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml +++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml @@ -112,6 +112,12 @@ properties: # threshold, and the current is below this setting (7 in above chart) # See also Documentation/devicetree/bindings/power/supply/battery.txt + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + monitored-battery: description: phandle of battery characteristics devicetree node @@ -137,6 +143,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml new file mode 100644 index 000000000000..193a23af2007 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Battery charger driver for SMB345, SMB347 and SMB358 + +maintainers: + - David Heidelberg <david@ixit.cz> + - Dmitry Osipenko <digetx@gmail.com> + +properties: + compatible: + enum: + - summit,smb345 + - summit,smb347 + - summit,smb358 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + monitored-battery: + description: phandle to the battery node + $ref: /schemas/types.yaml#/definitions/phandle + + summit,enable-usb-charging: + type: boolean + description: Enable charging through USB. + + summit,enable-otg-charging: + type: boolean + description: Provide power for USB OTG + + summit,enable-mains-charging: + type: boolean + description: Enable charging through mains + + summit,enable-charge-control: + description: Enable charging control + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface) + - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low) + - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High) + + summit,fast-voltage-threshold-microvolt: + description: Voltage threshold to transit to fast charge mode (in uV) + minimum: 2400000 + maximum: 3000000 + + summit,mains-current-limit-microamp: + description: Maximum input current from AC/DC input (in uA) + + summit,usb-current-limit-microamp: + description: Maximum input current from USB input (in uA) + + summit,charge-current-compensation-microamp: + description: Charge current compensation (in uA) + + summit,chip-temperature-threshold-celsius: + description: Chip temperature for thermal regulation in °C. + enum: [100, 110, 120, 130] + + summit,soft-compensation-method: + description: Soft temperature limit compensation method + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none + - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation + - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation + +allOf: + - if: + properties: + compatible: + enum: + - summit,smb345 + - summit,smb358 + + then: + properties: + summit,mains-current-limit-microamp: + enum: [ 300000, 500000, 700000, 1000000, + 1500000, 1800000, 2000000] + + summit,usb-current-limit-microamp: + enum: [ 300000, 500000, 700000, 1000000, + 1500000, 1800000, 2000000] + + summit,charge-current-compensation-microamp: + enum: [200000, 450000, 600000, 900000] + + else: + properties: + summit,mains-current-limit-microamp: + enum: [ 300000, 500000, 700000, 900000, 1200000, + 1500000, 1800000, 2000000, 2200000, 2500000] + + summit,usb-current-limit-microamp: + enum: [ 300000, 500000, 700000, 900000, 1200000, + 1500000, 1800000, 2000000, 2200000, 2500000] + + summit,charge-current-compensation-microamp: + enum: [250000, 700000, 900000, 1200000] + +required: + - compatible + - reg + +anyOf: + - required: + - summit,enable-usb-charging + - required: + - summit,enable-otg-charging + - required: + - summit,enable-mains-charging + +additionalProperties: false + +examples: + - | + #include <dt-bindings/power/summit,smb347-charger.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@7f { + compatible = "summit,smb347"; + reg = <0x7f>; + + summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>; + summit,chip-temperature-threshold-celsius = <110>; + summit,mains-current-limit-microamp = <2000000>; + summit,usb-current-limit-microamp = <500000>; + summit,enable-usb-charging; + summit,enable-mains-charging; + + monitored-battery = <&battery>; + }; + }; + + battery: battery-cell { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <1800000>; + operating-range-celsius = <0 45>; + alert-celsius = <3 42>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/sleep.yaml b/Documentation/devicetree/bindings/powerpc/sleep.yaml new file mode 100644 index 000000000000..6494c7d08b93 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/sleep.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/powerpc/sleep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PowerPC sleep property + +maintainers: + - Rob Herring <robh@kernel.org> + +description: | + Devices on SOCs often have mechanisms for placing devices into low-power + states that are decoupled from the devices' own register blocks. Sometimes, + this information is more complicated than a cell-index property can + reasonably describe. Thus, each device controlled in such a manner + may contain a "sleep" property which describes these connections. + + The sleep property consists of one or more sleep resources, each of + which consists of a phandle to a sleep controller, followed by a + controller-specific sleep specifier of zero or more cells. + + The semantics of what type of low power modes are possible are defined + by the sleep controller. Some examples of the types of low power modes + that may be supported are: + + - Dynamic: The device may be disabled or enabled at any time. + - System Suspend: The device may request to be disabled or remain + awake during system suspend, but will not be disabled until then. + - Permanent: The device is disabled permanently (until the next hard + reset). + + Some devices may share a clock domain with each other, such that they should + only be suspended when none of the devices are in use. Where reasonable, + such nodes should be placed on a virtual bus, where the bus has the sleep + property. If the clock domain is shared among devices that cannot be + reasonably grouped in this manner, then create a virtual sleep controller + (similar to an interrupt nexus, except that defining a standardized + sleep-map should wait until its necessity is demonstrated). + +select: true + +properties: + sleep: + $ref: /schemas/types.yaml#definitions/phandle-array + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt index d48f9eb3636e..743eda754e65 100644 --- a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt +++ b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt @@ -18,6 +18,8 @@ Clock Properties: - fsl,tmr-add Frequency compensation value. - fsl,tmr-fiper1 Fixed interval period pulse generator. - fsl,tmr-fiper2 Fixed interval period pulse generator. + - fsl,tmr-fiper3 Fixed interval period pulse generator. + Supported only on DPAA2 and ENETC hardware. - fsl,max-adj Maximum frequency adjustment in parts per billion. - fsl,extts-fifo The presence of this property indicates hardware support for the external trigger stamp FIFO. diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml index 41ece1d85315..4cfbffd8414a 100644 --- a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml @@ -14,7 +14,7 @@ description: | Google's ChromeOS EC PWM is a simple PWM attached to the Embedded Controller (EC) and controlled via a host-command interface. An EC PWM node should be only found as a sub-node of the EC node (see - Documentation/devicetree/bindings/mfd/cros-ec.txt). + Documentation/devicetree/bindings/mfd/google,cros-ec.yaml). properties: compatible: diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml index 01df06777cba..379d693889f6 100644 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml @@ -19,9 +19,28 @@ properties: - 3 compatible: - enum: - - fsl,imx1-pwm - - fsl,imx27-pwm + oneOf: + - enum: + - fsl,imx1-pwm + - fsl,imx27-pwm + - items: + - enum: + - fsl,imx25-pwm + - fsl,imx31-pwm + - fsl,imx50-pwm + - fsl,imx51-pwm + - fsl,imx53-pwm + - fsl,imx6q-pwm + - fsl,imx6sl-pwm + - fsl,imx6sll-pwm + - fsl,imx6sx-pwm + - fsl,imx6ul-pwm + - fsl,imx7d-pwm + - fsl,imx8mm-pwm + - fsl,imx8mn-pwm + - fsl,imx8mp-pwm + - fsl,imx8mq-pwm + - const: fsl,imx27-pwm reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml new file mode 100644 index 000000000000..981cfec53f37 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/kontron,sl28cpld-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM driver for the sl28cpld board management controller + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + + The controller supports one PWM channel and supports only four distinct + frequencies (250Hz, 500Hz, 1kHz, 2kHz). + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: kontron,sl28cpld-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 2 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt deleted file mode 100644 index 3d1dd7b06efc..000000000000 --- a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt +++ /dev/null @@ -1,33 +0,0 @@ -SiFive PWM controller - -Unlike most other PWM controllers, the SiFive PWM controller currently only -supports one period for all channels in the PWM. All PWMs need to run at -the same period. The period also has significant restrictions on the values -it can achieve, which the driver rounds to the nearest achievable period. -PWM RTL that corresponds to the IP block version numbers can be found -here: - -https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm - -Required properties: -- compatible: Should be "sifive,<chip>-pwm" and "sifive,pwm<version>". - Supported compatible strings are: "sifive,fu540-c000-pwm" for the SiFive - PWM v0 as integrated onto the SiFive FU540 chip, and "sifive,pwm0" for the - SiFive PWM v0 IP block with no chip integration tweaks. - Please refer to sifive-blocks-ip-versioning.txt for details. -- reg: physical base address and length of the controller's registers -- clocks: Should contain a clock identifier for the PWM's parent clock. -- #pwm-cells: Should be 3. See pwm.yaml in this directory - for a description of the cell format. -- interrupts: one interrupt per PWM channel - -Examples: - -pwm: pwm@10020000 { - compatible = "sifive,fu540-c000-pwm", "sifive,pwm0"; - reg = <0x0 0x10020000 0x0 0x1000>; - clocks = <&tlclk>; - interrupt-parent = <&plic>; - interrupts = <42 43 44 45>; - #pwm-cells = <3>; -}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml new file mode 100644 index 000000000000..5ac25275d8bf --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 SiFive, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-sifive.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive PWM controller + +maintainers: + - Yash Shah <yash.shah@sifive.com> + - Sagar Kadam <sagar.kadam@sifive.com> + - Paul Walmsley <paul.walmsley@sifive.com> + +description: + Unlike most other PWM controllers, the SiFive PWM controller currently + only supports one period for all channels in the PWM. All PWMs need to + run at the same period. The period also has significant restrictions on + the values it can achieve, which the driver rounds to the nearest + achievable period. PWM RTL that corresponds to the IP block version + numbers can be found here - + + https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm + +properties: + compatible: + items: + - const: sifive,fu540-c000-pwm + - const: sifive,pwm0 + description: + Should be "sifive,<chip>-pwm" and "sifive,pwm<version>". Supported + compatible strings are "sifive,fu540-c000-pwm" for the SiFive PWM v0 + as integrated onto the SiFive FU540 chip, and "sifive,pwm0" for the + SiFive PWM v0 IP block with no chip integration tweaks. + Please refer to sifive-blocks-ip-versioning.txt for details. + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#pwm-cells": + const: 3 + + interrupts: + maxItems: 4 + description: + Each PWM instance in FU540-C000 has 4 comparators. One interrupt per comparator. + +required: + - compatible + - reg + - clocks + - "#pwm-cells" + - interrupts + +additionalProperties: false + +examples: + - | + pwm: pwm@10020000 { + compatible = "sifive,fu540-c000-pwm", "sifive,pwm0"; + reg = <0x10020000 0x1000>; + clocks = <&tlclk>; + interrupt-parent = <&plic>; + interrupts = <42>, <43>, <44>, <45>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml index fa4f9de92090..7d1f687cee9c 100644 --- a/Documentation/devicetree/bindings/pwm/pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml @@ -20,6 +20,8 @@ properties: required: - "#pwm-cells" +additionalProperties: true + examples: - | pwm: pwm@7000a000 { diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml index daadde9ff9c4..3c2fa2e93d1b 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml @@ -13,6 +13,7 @@ properties: compatible: items: - enum: + - renesas,pwm-r8a7742 # RZ/G1H - renesas,pwm-r8a7743 # RZ/G1M - renesas,pwm-r8a7744 # RZ/G1N - renesas,pwm-r8a7745 # RZ/G1E @@ -20,6 +21,7 @@ properties: - renesas,pwm-r8a774a1 # RZ/G2M - renesas,pwm-r8a774b1 # RZ/G2N - renesas,pwm-r8a774c0 # RZ/G2E + - renesas,pwm-r8a774e1 # RZ/G2H - renesas,pwm-r8a7778 # R-Car M1A - renesas,pwm-r8a7779 # R-Car H1 - renesas,pwm-r8a7790 # R-Car H2 diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml index 4bf62a3d5bba..aa9a4570c906 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml @@ -15,6 +15,7 @@ properties: - enum: - renesas,tpu-r8a73a4 # R-Mobile APE6 - renesas,tpu-r8a7740 # R-Mobile A1 + - renesas,tpu-r8a7742 # RZ/G1H - renesas,tpu-r8a7743 # RZ/G1M - renesas,tpu-r8a7744 # RZ/G1N - renesas,tpu-r8a7745 # RZ/G1E diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index 3dbb9cf86f15..92211f2b3b0c 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -73,6 +73,8 @@ required: - compatible - regulator-name +unevaluatedProperties: false + examples: - | reg_1v8: regulator-1v8 { diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml index c9453d7ce227..69e5402da761 100644 --- a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml @@ -28,6 +28,8 @@ required: - compatible - reg +unevaluatedProperties: false + examples: - | spi0 { diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml index 605590384b48..f7e3d8fd3bf3 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -91,6 +91,8 @@ required: - gpios - states +unevaluatedProperties: false + examples: - | gpio-regulator { diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt deleted file mode 100644 index 551867829459..000000000000 --- a/Documentation/devicetree/bindings/regulator/mp886x.txt +++ /dev/null @@ -1,27 +0,0 @@ -Monolithic Power Systems MP8867/MP8869 voltage regulator - -Required properties: -- compatible: Must be one of the following. - "mps,mp8867" - "mps,mp8869" -- reg: I2C slave address. -- enable-gpios: enable gpios. -- mps,fb-voltage-divider: An array of two integers containing the resistor - values R1 and R2 of the feedback voltage divider in kilo ohms. - -Any property defined as part of the core regulator binding, defined in -./regulator.txt, can also be used. - -Example: - - vcpu: regulator@62 { - compatible = "mps,mp8869"; - regulator-name = "vcpu"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <850000>; - regulator-always-on; - regulator-boot-on; - enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; - mps,fb-voltage-divider = <80 240>; - reg = <0x62>; - }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml new file mode 100644 index 000000000000..ba175b30f468 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power Systems MP8867/MP8869 voltage regulator + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - mps,mp8867 + - mps,mp8869 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO to enable/disable the regulator. + maxItems: 1 + + mps,fb-voltage-divider: + description: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in kilo ohms. + $ref: "/schemas/types.yaml#/definitions/uint32-array" + maxItems: 2 + + mps,switch-frequency-hz: + description: The valid switch frequency in Hertz. + enum: [500000, 750000, 1000000, 1250000, 1500000] + +required: + - compatible + - reg + - enable-gpios + - mps,fb-voltage-divider + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@62 { + compatible = "mps,mp8869"; + regulator-name = "vcpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; + mps,fb-voltage-divider = <80 240>; + reg = <0x62>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml new file mode 100644 index 000000000000..a462d99a25cc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6360 Regulator from MediaTek Integrated + +maintainers: + - Gene Chen <gene_chen@richtek.com> + +description: | + list of regulators provided by this controller, must be named + after their hardware counterparts buck1/2 or ldo1/2/3/5/6/7 + +properties: + compatible: + const: mediatek,mt6360-regulator + + LDO_VIN1-supply: + description: Input supply phandle(s) for LDO1/2/3 + LDO_VIN2-supply: + description: Input supply phandle(s) for LDO5 + LDO_VIN3-supply: + description: Input supply phandle(s) for LDO6/7 + +patternProperties: + "^buck[12]$": + $ref: "regulator.yaml#" + + "^ldo[123567]$": + $ref: "regulator.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/mediatek,mt6360-regulator.h> + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&BUCK2>; + buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + BUCK2: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt deleted file mode 100644 index 4d3b12b92cb3..000000000000 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ /dev/null @@ -1,394 +0,0 @@ -PFUZE100 family of regulators - -Required properties: -- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000", "fsl,pfuze3001" -- reg: I2C slave address - -Optional properties: -- fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch - regulators to save power consumption. Attention, ensure that all important - regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on" - property. If not present, the switched regulators are always on and can't be - disabled. This binding is a workaround to keep backward compatibility with - old dtb's which rely on the fact that the switched regulators are always on - and don't mark them explicit as "regulator-always-on". -- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all - power rails when PMIC_STBY_REQ line is asserted during the power off sequence. - Use this option if the SoC should be powered off by external power - management IC (PMIC) on PMIC_STBY_REQ signal. - As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal. - -Required child node: -- regulators: This is the list of child nodes that specify the regulator - initialization data for defined regulators. Please refer to below doc - Documentation/devicetree/bindings/regulator/regulator.txt. - - The valid names for regulators are: - --PFUZE100 - sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 - --PFUZE200 - sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin - --PFUZE3000 - sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4 - --PFUZE3001 - sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4 - -Each regulator is defined using the standard binding for regulators. - -Example 1: PFUZE100 - - pfuze100: pmic@8 { - compatible = "fsl,pfuze100"; - reg = <0x08>; - - regulators { - sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3b_reg: sw3b { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - - -Example 2: PFUZE200 - - pfuze200: pmic@8 { - compatible = "fsl,pfuze200"; - reg = <0x08>; - - regulators { - sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3b_reg: sw3b { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - coin_reg: coin { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - -Example 3: PFUZE3000 - - pfuze3000: pmic@8 { - compatible = "fsl,pfuze3000"; - reg = <0x08>; - - regulators { - sw1a_reg: sw1a { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - /* use sw1c_reg to align with pfuze100/pfuze200 */ - sw1c_reg: sw1b { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - regulator-always-on; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen2_reg: vldo2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen3_reg: vccsd { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen4_reg: v33 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - }; - - vgen5_reg: vldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vldo4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - -Example 4: PFUZE 3001 - - pfuze3001: pmic@8 { - compatible = "fsl,pfuze3001"; - reg = <0x08>; - - regulators { - sw1_reg: sw1 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: sw3 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - regulator-always-on; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen2_reg: vldo2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-always-on; - }; - - vgen3_reg: vccsd { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen4_reg: v33 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen5_reg: vldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vldo4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml new file mode 100644 index 000000000000..c6de49685db7 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/pfuze100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PFUZE100 family of regulators + +maintainers: + - Robin Gong <yibin.gong@nxp.com> + +description: | + The valid names for regulators are: + --PFUZE100 + sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 + --PFUZE200 + sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin + --PFUZE3000 + sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4 + --PFUZE3001 + sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4 + + Each regulator is defined using the standard binding for regulators. + +properties: + $nodename: + pattern: "^pmic@[0-9]$" + + compatible: + enum: + - fsl,pfuze100 + - fsl,pfuze200 + - fsl,pfuze3000 + - fsl,pfuze3001 + + reg: + maxItems: 1 + + fsl,pfuze-support-disable-sw: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Boolean, if present disable all unused switch regulators to save power + consumption. Attention, ensure that all important regulators + (e.g. DDR ref, DDR supply) has set the "regulator-always-on" property. + If not present, the switched regulators are always on and can't be + disabled. This binding is a workaround to keep backward compatibility + with old dtb's which rely on the fact that the switched regulators are + always on and don't mark them explicit as "regulator-always-on". + + fsl,pmic-stby-poweroff: + $ref: /schemas/types.yaml#/definitions/flag + description: | + if present, configure the PMIC to shutdown all + power rails when PMIC_STBY_REQ line is asserted during the power off sequence. + Use this option if the SoC should be powered off by external power management + IC (PMIC) on PMIC_STBY_REQ signal. + As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal. + + regulators: + type: object + description: | + list of regulators provided by this controller. + + patternProperties: + "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$": + $ref: "regulator.yaml#" + type: object + + "^vgen[1-6]$": + $ref: "regulator.yaml#" + type: object + + "^(vsnvs|vref|vrefddr|swbst|coin)$": + $ref: "regulator.yaml#" + type: object + + additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index c0d7700afee7..a35c6cb9bf97 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -33,6 +33,10 @@ description: l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3, 5vs1, 5vs2 + For pm8950 and pm8953, s1, s2, s3, s4, s5, s6, s7, l1, l2, l3, l4, l5, l6, + l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, + l23 + For pm8994, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 @@ -41,6 +45,11 @@ description: l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2 + For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22, + l12, l13, l14, l15, l16, l17, l18, l19 + + For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob + For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 @@ -63,8 +72,11 @@ properties: - qcom,rpm-pm8916-regulators - qcom,rpm-pm8941-regulators - qcom,rpm-pm8950-regulators + - qcom,rpm-pm8953-regulators - qcom,rpm-pm8994-regulators - qcom,rpm-pm8998-regulators + - qcom,rpm-pm660-regulators + - qcom,rpm-pm660l-regulators - qcom,rpm-pma8084-regulators - qcom,rpm-pmi8994-regulators - qcom,rpm-pmi8998-regulators diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt index 8b005192f6e8..2b544059e029 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt @@ -12,6 +12,8 @@ Qualcomm SPMI Regulators "qcom,pm8950-regulators" "qcom,pm8994-regulators" "qcom,pmi8994-regulators" + "qcom,pm660-regulators" + "qcom,pm660l-regulators" "qcom,pms405-regulators" - interrupts: @@ -134,6 +136,35 @@ Qualcomm SPMI Regulators Definition: Reference to regulator supplying the input pin, as described in the data sheet. +- vdd_l1_l6_l7-supply: +- vdd_l2_l3-supply: +- vdd_l5-supply: +- vdd_l8_l9_l10_l11_l12_l13_l14-supply: +- vdd_l15_l16_l17_l18_l19-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s5-supply: +- vdd_s6-supply: + Usage: optional (pm660 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- vdd_l1_l9_l10-supply: +- vdd_l2-supply: +- vdd_l3_l5_l7_l8-supply: +- vdd_l4_l6-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: + Usage: optional (pm660l only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + - vdd_l1_l2-supply: - vdd_l3_l8-supply: - vdd_l4-supply: diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml index fb111e2d5b99..53853ec20fe2 100644 --- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml @@ -47,7 +47,7 @@ properties: required: - compatible -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml new file mode 100644 index 000000000000..0ae25d119b6f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi 7" display ATTINY88-based regulator/backlight controller + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The RaspberryPi 7" display has an ATTINY88-based regulator/backlight + controller on the PCB, which is used to turn the display unit on/off + and control the backlight. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: raspberrypi,7inch-touchscreen-panel-regulator + + reg: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@45 { + compatible = "raspberrypi,7inch-touchscreen-panel-regulator"; + reg = <0x45>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index ec505dbbf87c..6d0bc9cd4040 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -188,6 +188,8 @@ patternProperties: additionalProperties: false +additionalProperties: true + examples: - | xyzreg: regulator { diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml new file mode 100644 index 000000000000..235e593b3b2c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt4801-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4801 Display Bias regulators + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + Regulator nodes should be named to DSVP and DSVN. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf + +#The valid names for RT4801 regulator nodes are: +#DSVP, DSVN + +properties: + compatible: + enum: + - richtek,rt4801 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIOs to use to enable DSVP/DSVN regulator. + The first one is ENP to enable DSVP, and second one is ENM to enable DSVN. + Number of GPIO in the array list could be 1 or 2. + If only one gpio is specified, only one gpio used to control ENP/ENM. + Else both are spefied, DSVP/DSVN could be controlled individually. + Othersie, this property not specified. treat both as always-on regulator. + minItems: 1 + maxItems: 2 + +patternProperties: + "^DSV(P|N)$": + type: object + $ref: regulator.yaml# + description: + Properties for single display bias regulator. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt4801@73 { + compatible = "richtek,rt4801"; + reg = <0x73>; + enable-gpios = <&gpio26 2 0>, <&gpio26 3 0>; + + dsvp: DSVP { + regulator-name = "rt4801,dsvp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + dsvn: DSVN { + regulator-name = "rt4801,dsvn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml new file mode 100644 index 000000000000..a8ccb5cb8d77 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rtmv20-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RTMV20 laser diode regulator + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + Richtek RTMV20 is a load switch current regulator that can supply up to 6A. + It is used to drive laser diode. There're two signals for chip controls + (Enable/Fail), Enable pin to turn chip on, and Fail pin as fault indication. + There're still four pins for camera control, two inputs (strobe and vsync), + the others for outputs (fsin1 and fsin2). Strobe input to start the current + supply, vsync input from IR camera, and fsin1/fsin2 output for the optional. + +properties: + compatible: + const: richtek,rtmv20 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + enable-gpios: + description: A connection of the 'enable' gpio line. + maxItems: 1 + + richtek,ld-pulse-delay-us: + description: | + load current pulse delay in microsecond after strobe pin pulse high. + minimum: 0 + maximum: 100000 + default: 0 + + richtek,ld-pulse-width-us: + description: | + Load current pulse width in microsecond after strobe pin pulse high. + minimum: 0 + maximum: 10000 + default: 1200 + + richtek,fsin1-delay-us: + description: | + Fsin1 pulse high delay in microsecond after vsync signal pulse high. + minimum: 0 + maximum: 100000 + default: 23000 + + richtek,fsin1-width-us: + description: | + Fsin1 pulse high width in microsecond after vsync signal pulse high. + minimum: 40 + maximum: 10000 + default: 160 + + richtek,fsin2-delay-us: + description: | + Fsin2 pulse high delay in microsecond after vsync signal pulse high. + minimum: 0 + maximum: 100000 + default: 23000 + + richtek,fsin2-width-us: + description: | + Fsin2 pulse high width in microsecond after vsync signal pulse high. + minimum: 40 + maximum: 10000 + default: 160 + + richtek,es-pulse-width-us: + description: Eye safety function pulse width limit in microsecond. + minimum: 0 + maximum: 10000 + default: 1200 + + richtek,es-ld-current-microamp: + description: Eye safety function load current limit in microamp. + minimum: 0 + maximum: 6000000 + default: 3000000 + + richtek,lbp-level-microvolt: + description: Low battery protection level in microvolt. + minimum: 2400000 + maximum: 3700000 + default: 2700000 + + richtek,lbp-enable: + description: Low battery protection function enable control. + type: boolean + + richtek,strobe-polarity-high: + description: Strobe pin active polarity control. + type: boolean + + richtek,vsync-polarity-high: + description: Vsync pin active polarity control. + type: boolean + + richtek,fsin-enable: + description: Fsin function enable control. + type: boolean + + richtek,fsin-output: + description: Fsin function output control. + type: boolean + + richtek,es-enable: + description: Eye safety function enable control. + type: boolean + + lsw: + description: load switch current regulator description. + type: object + $ref: "regulator.yaml#" + +required: + - compatible + - reg + - wakeup-source + - interrupts + - enable-gpios + - lsw + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtmv20@34 { + compatible = "richtek,rtmv20"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>; + enable-gpios = <&gpio26 3 0>; + + richtek,strobe-polarity-high; + richtek,vsync-polarity-high; + + lsw { + regulator-name = "rtmv20,lsw"; + regulator-min-microamp = <0>; + regulator-max-microamp = <6000000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml index 19d9408d9c3b..f5e31196a646 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml @@ -93,6 +93,17 @@ patternProperties: # ---------------------------------------------------------------- # rest | not supported | not supported | not supported + # BD71837 power outputs can either be controlled by the PMIC internal + # hardware state machine or by software. If you need regulators to be + # turned ON/OFF for example based on PMIC_STBY_REQ line (which toggles + # PMIC HW state machine) - then you should set this property. + # Tradeoff is that then SW can't control the ON/OFF state for this + # regulator (other than invoking a PMIC state change). + rohm,no-regulator-enable-control: + description: | + Enable/Disable control of this regulator must be left to the + PMIC hardware state machine. + type: boolean required: - regulator-name diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml index 07256a4b50b9..eeac32cd15d6 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml @@ -88,6 +88,17 @@ patternProperties: # ---------------------------------------------------------------- # rest | not supported | not supported | not supported + # BD718(47/50) power outputs can either be controlled by the PMIC internal + # hardware state machine or by software. If you need regulators to be + # turned ON/OFF for example based on PMIC_STBY_REQ line (which toggles + # PMIC HW state machine) - then you should set this property. + # Tradeoff is that then SW can't control the ON/OFF state for this + # regulator (other than invoking a PMIC state change). + rohm,no-regulator-enable-control: + description: | + Enable/Disable control of this regulator must be left to the + PMIC hardware state machine. + type: boolean required: - regulator-name diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml new file mode 100644 index 000000000000..b6515a0cee62 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd9576-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD9576 and BD9573 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + This module is part of the ROHM BD9576 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + The valid names for BD9576 regulator nodes are + regulator-vd50, regulator-vd18, regulator-vdddr, regulator-vd10, + regulator-voutl1, regulator-vouts1 + +patternProperties: + "regulator-.+": + type: object + description: + Properties for single regulator. + $ref: "regulator.yaml#" + + required: + - regulator-name + + unevaluatedProperties: false +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml new file mode 100644 index 000000000000..82af4d656177 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/silergy,sy8824x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: silergy sy8824c,sy8824e,sy20276 and sy20278 PMIC + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - silergy,sy8824c + - silergy,sy8824e + - silergy,sy20276 + - silergy,sy20278 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@60 { + compatible = "silergy,sy8824c"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + reg = <0x60>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml index 15983cdc7c28..b222adabc7b4 100644 --- a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml @@ -31,6 +31,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml index cb336b2c16af..9f1c70381b82 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml @@ -34,6 +34,8 @@ required: - st,syscfg - vdda-supply +unevaluatedProperties: false + examples: - | regulator-booster { diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml index 33cdaeb25aee..3cd4a254e4cb 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml @@ -36,6 +36,8 @@ required: - clocks - vdda-supply +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/stm32mp1-clks.h> diff --git a/Documentation/devicetree/bindings/regulator/sy8824x.txt b/Documentation/devicetree/bindings/regulator/sy8824x.txt deleted file mode 100644 index c5e95850c427..000000000000 --- a/Documentation/devicetree/bindings/regulator/sy8824x.txt +++ /dev/null @@ -1,24 +0,0 @@ -SY8824C/SY8824E/SY20276 Voltage regulator - -Required properties: -- compatible: Must be one of the following. - "silergy,sy8824c" - "silergy,sy8824e" - "silergy,sy20276" - "silergy,sy20278" -- reg: I2C slave address - -Any property defined as part of the core regulator binding, defined in -./regulator.txt, can also be used. - -Example: - - vcore: regulator@00 { - compatible = "silergy,sy8824c"; - reg = <0x66>; - regulator-name = "vcore"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml index d1a79d2ffa1e..6f45582c914e 100644 --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml @@ -28,6 +28,8 @@ required: - compatible - reg +unevaluatedProperties: false + examples: - | regulator@1948000 { diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml index a0aea73bf412..7b4ae5d23351 100644 --- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml @@ -35,3 +35,5 @@ properties: Initial data for the MICVDD regulator. $ref: "regulator.yaml#" type: object + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml index 87c52316ddbd..9282837d64ba 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml @@ -25,6 +25,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | imem@146bf000 { diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml new file mode 100644 index 000000000000..4069f0f5e8fa --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -0,0 +1,281 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/ti,k3-r5f-rproc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI K3 R5F processor subsystems + +maintainers: + - Suman Anna <s-anna@ti.com> + +description: | + The TI K3 family of SoCs usually have one or more dual-core Arm Cortex R5F + processor subsystems/clusters (R5FSS). The dual core cluster can be used + either in a LockStep mode providing safety/fault tolerance features or in a + Split mode providing two individual compute cores for doubling the compute + capacity. These are used together with other processors present on the SoC + to achieve various system level goals. + + Each Dual-Core R5F sub-system is represented as a single DTS node + representing the cluster, with a pair of child DT nodes representing + the individual R5F cores. Each node has a number of required or optional + properties that enable the OS running on the host processor to perform + the device management of the remote processor and to communicate with the + remote processor. + +properties: + $nodename: + pattern: "^r5fss(@.*)?" + + compatible: + enum: + - ti,am654-r5fss + - ti,j721e-r5fss + + power-domains: + description: | + Should contain a phandle to a PM domain provider node and an args + specifier containing the R5FSS device id value. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + description: | + Standard ranges definition providing address translations for + local R5F TCM address spaces to bus addresses. + +# Optional properties: +# -------------------- + + ti,cluster-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Configuration Mode for the Dual R5F cores within the R5F cluster. + Should be either a value of 1 (LockStep mode) or 0 (Split mode), + default is LockStep mode if omitted. + +# R5F Processor Child Nodes: +# ========================== + +patternProperties: + "^r5f@[a-f0-9]+$": + type: object + description: | + The R5F Sub-System device node should define two R5F child nodes, each + node representing a TI instantiation of the Arm Cortex R5F core. There + are some specific integration differences for the IP like the usage of + a Region Address Translator (RAT) for translating the larger SoC bus + addresses into a 32-bit address space for the processor. + + Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM) + internal memories split between two banks - TCMA and TCMB (further + interleaved into two banks TCMB0 and TCMB1). These memories (also called + ATCM and BTCM) provide read/write performance on par with the core's L1 + caches. Each of the TCMs can be enabled or disabled independently and + either of them can be configured to appear at that R5F's address 0x0. + + The cores do not use an MMU, but has a Region Address Translater + (RAT) module that is accessible only from the R5Fs for providing + translations between 32-bit CPU addresses into larger system bus + addresses. Cache and memory access settings are provided through a + Memory Protection Unit (MPU), programmable only from the R5Fs. + + allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + + properties: + compatible: + enum: + - ti,am654-r5f + - ti,j721e-r5f + + reg: + items: + - description: Address and Size of the ATCM internal memory region + - description: Address and Size of the BTCM internal memory region + + reg-names: + items: + - const: atcm + - const: btcm + + resets: + description: | + Should contain the phandle to the reset controller node managing the + local resets for this device, and a reset specifier. + maxItems: 1 + + firmware-name: + description: | + Should contain the name of the default firmware image + file located on the firmware search path + +# The following properties are mandatory for R5F Core0 in both LockStep and Split +# modes, and are mandatory for R5F Core1 _only_ in Split mode. They are unused for +# R5F Core1 in LockStep mode: + + mboxes: + description: | + OMAP Mailbox specifier denoting the sub-mailbox, to be used for + communication with the remote processor. This property should match + with the sub-mailbox node used in the firmware image. + maxItems: 1 + + memory-region: + description: | + phandle to the reserved memory nodes to be associated with the + remoteproc device. There should be at least two reserved memory nodes + defined. The reserved memory nodes should be carveout nodes, and + should be defined with a "no-map" property as per the bindings in + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + minItems: 2 + maxItems: 8 + items: + - description: region used for dynamic DMA allocations like vrings and + vring buffers + - description: region reserved for firmware image sections + additionalItems: true + + +# Optional properties: +# -------------------- +# The following properties are optional properties for each of the R5F cores: + + ti,atcm-enable: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + R5F core configuration mode dictating if ATCM should be enabled. The + R5F address of ATCM is dictated by ti,loczrama property. Should be + either a value of 1 (enabled) or 0 (disabled), default is disabled + if omitted. Recommended to enable it for maximizing TCMs. + + ti,btcm-enable: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + R5F core configuration mode dictating if BTCM should be enabled. The + R5F address of BTCM is dictated by ti,loczrama property. Should be + either a value of 1 (enabled) or 0 (disabled), default is enabled if + omitted. + + ti,loczrama: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + R5F core configuration mode dictating which TCM should appear at + address 0 (from core's view). Should be either a value of 1 (ATCM + at 0x0) or 0 (BTCM at 0x0), default value is 1 if omitted. + + sram: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 + description: | + phandles to one or more reserved on-chip SRAM regions. The regions + should be defined as child nodes of the respective SRAM node, and + should be defined as per the generic bindings in, + Documentation/devicetree/bindings/sram/sram.yaml + + required: + - compatible + - reg + - reg-names + - ti,sci + - ti,sci-dev-id + - ti,sci-proc-ids + - resets + - firmware-name + + unevaluatedProperties: false + +required: + - compatible + - power-domains + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + / { + model = "Texas Instruments K3 AM654 SoC"; + compatible = "ti,am654-evm", "ti,am654"; + #address-cells = <2>; + #size-cells = <2>; + + bus@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>; + + bus@28380000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>; /* MCU SRAM */ + + /* AM65x MCU R5FSS node */ + mcu_r5fss0: r5fss@41000000 { + compatible = "ti,am654-r5fss"; + power-domains = <&k3_pds 129>; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x41000000 0x00 0x41000000 0x20000>, + <0x41400000 0x00 0x41400000 0x20000>; + + mcu_r5f0: r5f@41000000 { + compatible = "ti,am654-r5f"; + reg = <0x41000000 0x00008000>, + <0x41010000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <159>; + ti,sci-proc-ids = <0x01 0xFF>; + resets = <&k3_reset 159 1>; + firmware-name = "am65x-mcu-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + mboxes = <&mailbox0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; + sram = <&mcu_r5fss0_core0_sram>; + }; + + mcu_r5f1: r5f@41400000 { + compatible = "ti,am654-r5f"; + reg = <0x41400000 0x00008000>, + <0x41410000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <245>; + ti,sci-proc-ids = <0x02 0xFF>; + resets = <&k3_reset 245 1>; + firmware-name = "am65x-mcu-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + mboxes = <&mailbox1 &mbox_mcu_r5fss0_core1>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt index 4dd20de6977f..e8d3096d922c 100644 --- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt +++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt @@ -64,6 +64,9 @@ reusable (optional) - empty property system can use that region to store volatile or cached data that can be otherwise regenerated or migrated elsewhere. +A node must not carry both the no-map and the reusable property as these are +logically contradictory. + Linux implementation note: - If a "linux,cma-default" property is present, then Linux will use the region for the default pool of the contiguous memory allocator. diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml index 569cd3bd3a70..00430e2eabc8 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml @@ -22,12 +22,19 @@ description: | properties: compatible: - items: - - enum: - - fsl,imx7d-src - - fsl,imx8mq-src - - fsl,imx8mp-src - - const: syscon + oneOf: + - items: + - enum: + - fsl,imx7d-src + - fsl,imx8mq-src + - fsl,imx8mp-src + - const: syscon + - items: + - enum: + - fsl,imx8mm-src + - fsl,imx8mn-src + - const: fsl,imx8mq-src + - const: syscon reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt index 6e802703af60..17b7a6a43a29 100644 --- a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt +++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt @@ -9,7 +9,7 @@ Optional property: - nuvoton,sw-reset-number - Contains the software reset number to restart the SoC. NPCM7xx contain four software reset that represent numbers 1 to 4. - If 'nuvoton,sw-reset-number' is not specfied software reset is disabled. + If 'nuvoton,sw-reset-number' is not specified software reset is disabled. Example: rstc: rstc@f0801000 { diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index f80ba2c66f71..c6925e0b16e4 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -91,6 +91,8 @@ required: - riscv,isa - interrupt-controller +additionalProperties: true + examples: - | // Example 1: SiFive Freedom U540G Development Kit diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt deleted file mode 100644 index 73d8f19c3bd9..000000000000 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt +++ /dev/null @@ -1,51 +0,0 @@ -SiFive L2 Cache Controller --------------------------- -The SiFive Level 2 Cache Controller is used to provide access to fast copies -of memory for masters in a Core Complex. The Level 2 Cache Controller also -acts as directory-based coherency manager. -All the properties in ePAPR/DeviceTree specification applies for this platform - -Required Properties: --------------------- -- compatible: Should be "sifive,fu540-c000-ccache" and "cache" - -- cache-block-size: Specifies the block size in bytes of the cache. - Should be 64 - -- cache-level: Should be set to 2 for a level 2 cache - -- cache-sets: Specifies the number of associativity sets of the cache. - Should be 1024 - -- cache-size: Specifies the size in bytes of the cache. Should be 2097152 - -- cache-unified: Specifies the cache is a unified cache - -- interrupts: Must contain 3 entries (DirError, DataError and DataFail signals) - -- reg: Physical base address and size of L2 cache controller registers map - -Optional Properties: --------------------- -- next-level-cache: phandle to the next level cache if present. - -- memory-region: reference to the reserved-memory for the L2 Loosely Integrated - Memory region. The reserved memory node should be defined as per the bindings - in reserved-memory.txt - - -Example: - - cache-controller@2010000 { - compatible = "sifive,fu540-c000-ccache", "cache"; - cache-block-size = <64>; - cache-level = <2>; - cache-sets = <1024>; - cache-size = <2097152>; - cache-unified; - interrupt-parent = <&plic0>; - interrupts = <1 2 3>; - reg = <0x0 0x2010000 0x0 0x1000>; - next-level-cache = <&L25 &L40 &L36>; - memory-region = <&l2_lim>; - }; diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml new file mode 100644 index 000000000000..3f4a1939554d --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2020 SiFive, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/sifive-l2-cache.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive L2 Cache Controller + +maintainers: + - Sagar Kadam <sagar.kadam@sifive.com> + - Yash Shah <yash.shah@sifive.com> + - Paul Walmsley <paul.walmsley@sifive.com> + +description: + The SiFive Level 2 Cache Controller is used to provide access to fast copies + of memory for masters in a Core Complex. The Level 2 Cache Controller also + acts as directory-based coherency manager. + All the properties in ePAPR/DeviceTree specification applies for this platform. + +allOf: + - $ref: /schemas/cache-controller.yaml# + +select: + properties: + compatible: + items: + - enum: + - sifive,fu540-c000-ccache + + required: + - compatible + +properties: + compatible: + items: + - const: sifive,fu540-c000-ccache + - const: cache + + cache-block-size: + const: 64 + + cache-level: + const: 2 + + cache-sets: + const: 1024 + + cache-size: + const: 2097152 + + cache-unified: true + + interrupts: + description: | + Must contain entries for DirError, DataError and DataFail signals. + minItems: 3 + maxItems: 3 + + reg: + maxItems: 1 + + next-level-cache: true + + memory-region: + description: | + The reference to the reserved-memory for the L2 Loosely Integrated Memory region. + The reserved memory node should be defined as per the bindings in reserved-memory.txt. + +additionalProperties: false + +required: + - compatible + - cache-block-size + - cache-level + - cache-sets + - cache-size + - cache-unified + - interrupts + - reg + +examples: + - | + cache-controller@2010000 { + compatible = "sifive,fu540-c000-ccache", "cache"; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <1024>; + cache-size = <2097152>; + cache-unified; + reg = <0x2010000 0x1000>; + interrupt-parent = <&plic0>; + interrupts = <1>, + <2>, + <3>; + next-level-cache = <&L25>; + memory-region = <&l2_lim>; + }; diff --git a/Documentation/devicetree/bindings/rng/imx-rng.txt b/Documentation/devicetree/bindings/rng/imx-rng.txt deleted file mode 100644 index 659d4efdd664..000000000000 --- a/Documentation/devicetree/bindings/rng/imx-rng.txt +++ /dev/null @@ -1,23 +0,0 @@ -Freescale RNGA/RNGB/RNGC (Random Number Generator Versions A, B and C) - -Required properties: -- compatible : should be one of - "fsl,imx21-rnga" - "fsl,imx31-rnga" (backward compatible with "fsl,imx21-rnga") - "fsl,imx25-rngb" - "fsl,imx6sl-rngb" (backward compatible with "fsl,imx25-rngb") - "fsl,imx6sll-rngb" (backward compatible with "fsl,imx25-rngb") - "fsl,imx6ull-rngb" (backward compatible with "fsl,imx25-rngb") - "fsl,imx35-rngc" -- reg : offset and length of the register set of this block -- interrupts : the interrupt number for the RNG block -- clocks : the RNG clk source - -Example: - -rng@53fb0000 { - compatible = "fsl,imx25-rngb"; - reg = <0x53fb0000 0x4000>; - interrupts = <22>; - clocks = <&trng_clk>; -}; diff --git a/Documentation/devicetree/bindings/rng/imx-rng.yaml b/Documentation/devicetree/bindings/rng/imx-rng.yaml new file mode 100644 index 000000000000..4ad1e456a801 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/imx-rng.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/imx-rng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale RNGA/RNGB/RNGC (Random Number Generator Versions A, B and C) + +maintainers: + - Vladimir Zapolskiy <vz@mleia.com> + +properties: + compatible: + oneOf: + - const: fsl,imx21-rnga + - const: fsl,imx25-rngb + - items: + - const: fsl,imx31-rnga + - const: fsl,imx21-rnga + - items: + - enum: + - fsl,imx6sl-rngb + - fsl,imx6sll-rngb + - fsl,imx6ull-rngb + - const: fsl,imx25-rngb + - const: fsl,imx35-rngc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + rngb@53fb0000 { + compatible = "fsl,imx25-rngb"; + reg = <0x53fb0000 0x4000>; + clocks = <&clks 109>; + interrupts = <22>; + }; diff --git a/Documentation/devicetree/bindings/rng/ingenic,trng.yaml b/Documentation/devicetree/bindings/rng/ingenic,trng.yaml new file mode 100644 index 000000000000..808f247c8421 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/ingenic,trng.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/ingenic,trng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for DTRNG in Ingenic SoCs + +maintainers: + - 周ç°æ° (Zhou Yanjie) <zhouyanjie@wanyeetech.com> + +description: + The True Random Number Generator in Ingenic SoCs. + +properties: + compatible: + enum: + - ingenic,x1830-dtrng + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/x1830-cgu.h> + + dtrng: trng@10072000 { + compatible = "ingenic,x1830-dtrng"; + reg = <0x10072000 0xc>; + + clocks = <&cgu X1830_CLK_DTRNG>; + }; +... diff --git a/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml b/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml new file mode 100644 index 000000000000..1e17e55762f1 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/xiphera,xip8001b-trng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xiphera XIP8001B-trng bindings + +maintainers: + - Atte Tommiska <atte.tommiska@xiphera.com> + +description: | + Xiphera FPGA-based true random number generator intellectual property core. + +properties: + compatible: + const: xiphera,xip8001b-trng + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + rng@43c00000 { + compatible = "xiphera,xip8001b-trng"; + reg = <0x43c00000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml index bc2c7e53a28e..60e93e86ad9d 100644 --- a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml @@ -68,6 +68,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/jz4740-cgu.h> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml new file mode 100644 index 000000000000..a2c55303810d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/microcrystal,rv3032.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip RV-3032 RTC Device Tree Bindings + +allOf: + - $ref: "rtc.yaml#" + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +properties: + compatible: + const: microcrystal,rv3032 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + start-year: true + + trickle-resistor-ohms: + enum: + - 1000 + - 2000 + - 7000 + - 11000 + + trickle-voltage-millivolt: + enum: + - 1750 + - 3000 + - 4400 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc@51 { + compatible = "microcrystal,rv3032"; + reg = <0x51>; + status = "okay"; + pinctrl-0 = <&rtc_nint_pins>; + interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>; + trickle-resistor-ohms = <7000>; + trickle-voltage-millivolt = <1750>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt index 66f0a31ae9ce..36f610bb051e 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt @@ -31,9 +31,16 @@ Optional properties: Selected resistor for trickle charger Possible values are 250, 2000, 4000 Should be given if trickle charger should be enabled -- trickle-diode-disable : ds1339, ds1340 and ds 1388 only +- aux-voltage-chargeable: ds1339, ds1340, ds1388 and rx8130 only + Tells whether the battery/supercap of the RTC (if any) is + chargeable or not. + Possible values are 0 (not chargeable), 1 (chargeable) + +Deprecated properties: +- trickle-diode-disable : ds1339, ds1340 and ds1388 only Do not use internal trickle charger diode Should be given if internal trickle charger diode should be disabled + (superseded by aux-voltage-chargeable) Example: ds1339: rtc@68 { diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml index ee237b2ed66a..8acd2de3de3a 100644 --- a/Documentation/devicetree/bindings/rtc/rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml @@ -17,6 +17,15 @@ properties: $nodename: pattern: "^rtc(@.*|-[0-9a-f])*$" + aux-voltage-chargeable: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Tells whether the battery/supercap of the RTC (if any) is + chargeable or not: + 0: not chargeable + 1: chargeable + quartz-load-femtofarads: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -35,6 +44,7 @@ properties: description: Do not use internal trickle charger diode. Should be given if internal trickle charger diode should be disabled. + deprecated: true trickle-resistor-ohms: $ref: /schemas/types.yaml#/definitions/uint32 @@ -42,9 +52,17 @@ properties: Selected resistor for trickle charger. Should be given if trickle charger should be enabled. + trickle-voltage-millivolt: + description: + Selected voltage for trickle charger. Should be given + if trickle charger should be enabled and the trickle voltage is different + from the RTC main power supply. + wakeup-source: $ref: /schemas/types.yaml#/definitions/flag description: Enables wake up of host system on alarm. +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml index 76bbf8b7555b..d51b236939bf 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml @@ -74,6 +74,8 @@ allOf: items: - const: rtc +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/exynos5420.h> diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt deleted file mode 100644 index 9582fc2279ed..000000000000 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ /dev/null @@ -1,40 +0,0 @@ -* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART) - -Required properties: -- compatible : Should be "fsl,<soc>-uart" -- reg : Address and length of the register set for the device -- interrupts : Should contain uart interrupt - -Optional properties: -- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works - in DCE mode by default. -- fsl,inverted-tx , fsl,inverted-rx : Indicate that the hardware attached - to the peripheral inverts the signal transmitted or received, - respectively, and that the peripheral should invert its output/input - using the INVT/INVR registers. -- rs485-rts-delay, rs485-rts-active-low, rs485-rx-during-tx, - linux,rs485-enabled-at-boot-time: see rs485.txt. Note that for RS485 - you must enable either the "uart-has-rtscts" or the "rts-gpios" - properties. In case you use "uart-has-rtscts" the signal that controls - the transceiver is actually CTS_B, not RTS_B. CTS_B is always output, - and RTS_B is input, regardless of dte-mode. - -Please check Documentation/devicetree/bindings/serial/serial.yaml -for the complete list of generic properties. - -Note: Each uart controller should have an alias correctly numbered -in "aliases" node. - -Example: - -aliases { - serial0 = &uart1; -}; - -uart1: serial@73fbc000 { - compatible = "fsl,imx51-uart", "fsl,imx21-uart"; - reg = <0x73fbc000 0x4000>; - interrupts = <31>; - uart-has-rtscts; - fsl,dte-mode; -}; diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml new file mode 100644 index 000000000000..9ff85bc6859c --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/fsl-imx-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART) + +maintainers: + - Fabio Estevam <fabio.estevam@nxp.com> + +allOf: + - $ref: "serial.yaml" + - $ref: "rs485.yaml" + +properties: + compatible: + oneOf: + - const: fsl,imx1-uart + - const: fsl,imx21-uart + - items: + - enum: + - fsl,imx25-uart + - fsl,imx27-uart + - fsl,imx31-uart + - fsl,imx35-uart + - fsl,imx50-uart + - fsl,imx51-uart + - fsl,imx53-uart + - fsl,imx6q-uart + - const: fsl,imx21-uart + - items: + - enum: + - fsl,imx6sl-uart + - fsl,imx6sll-uart + - fsl,imx6sx-uart + - const: fsl,imx6q-uart + - const: fsl,imx21-uart + - items: + - enum: + - fsl,imx6ul-uart + - fsl,imx7d-uart + - fsl,imx8mm-uart + - fsl,imx8mn-uart + - fsl,imx8mp-uart + - fsl,imx8mq-uart + - const: fsl,imx6q-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,dte-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Indicate the uart works in DTE mode. The uart works in DCE mode by default. + + fsl,inverted-tx: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Indicate that the hardware attached to the peripheral inverts the signal + transmitted, and that the peripheral should invert its output using the + INVT registers. + + fsl,inverted-rx: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Indicate that the hardware attached to the peripheral inverts the signal + received, and that the peripheral should invert its input using the + INVR registers. + + uart-has-rtscts: true + + rs485-rts-delay: true + rs485-rts-active-low: true + rs485-rx-during-tx: true + linux,rs485-enabled-at-boot-time: true + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + aliases { + serial0 = &uart1; + }; + + uart1: serial@73fbc000 { + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x73fbc000 0x4000>; + interrupts = <31>; + uart-has-rtscts; + fsl,dte-mode; + }; diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt deleted file mode 100644 index e7448b92dd9d..000000000000 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Freescale low power universal asynchronous receiver/transmitter (lpuart) - -Required properties: -- compatible : - - "fsl,vf610-lpuart" for lpuart compatible with the one integrated - on Vybrid vf610 SoC with 8-bit register organization - - "fsl,ls1021a-lpuart" for lpuart compatible with the one integrated - on LS1021A SoC with 32-bit big-endian register organization - - "fsl,ls1028a-lpuart" for lpuart compatible with the one integrated - on LS1028A SoC with 32-bit little-endian register organization - - "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated - on i.MX7ULP SoC with 32-bit little-endian register organization - - "fsl,imx8qxp-lpuart" for lpuart compatible with the one integrated - on i.MX8QXP SoC with 32-bit little-endian register organization - - "fsl,imx8qm-lpuart" for lpuart compatible with the one integrated - on i.MX8QM SoC with 32-bit little-endian register organization -- reg : Address and length of the register set for the device -- interrupts : Should contain uart interrupt -- clocks : phandle + clock specifier pairs, one for each entry in clock-names -- clock-names : For vf610/ls1021a/ls1028a/imx7ulp, "ipg" clock is for uart - bus/baud clock. For imx8qxp lpuart, "ipg" clock is bus clock that is used - to access lpuart controller registers, it also requires "baud" clock for - module to receive/transmit data. - -Optional properties: -- dmas: A list of two dma specifiers, one for each entry in dma-names. -- dma-names: should contain "tx" and "rx". -- rs485-rts-active-low, linux,rs485-enabled-at-boot-time: see rs485.txt - -Note: Optional properties for DMA support. Write them both or both not. - -Example: - -uart0: serial@40027000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x40027000 0x1000>; - interrupts = <0 61 0x00>; - clocks = <&clks VF610_CLK_UART0>; - clock-names = "ipg"; - dmas = <&edma0 0 2>, - <&edma0 0 3>; - dma-names = "rx","tx"; - }; diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml new file mode 100644 index 000000000000..bd21060d26e0 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale low power universal asynchronous receiver/transmitter (lpuart) + +maintainers: + - Fugang Duan <fugang.duan@nxp.com> + +allOf: + - $ref: "rs485.yaml" + +properties: + compatible: + oneOf: + - enum: + - fsl,vf610-lpuart + - fsl,ls1021a-lpuart + - fsl,ls1028a-lpuart + - fsl,imx7ulp-lpuart + - fsl,imx8qm-lpuart + - items: + - const: fsl,imx8qxp-lpuart + - const: fsl,imx7ulp-lpuart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: ipg clock + - description: baud clock + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: baud + minItems: 1 + maxItems: 2 + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + + rs485-rts-active-low: true + linux,rs485-enabled-at-boot-time: true + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/vf610-clock.h> + + serial@40027000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40027000 0x1000>; + interrupts = <0 61 0x00>; + clocks = <&clks VF610_CLK_UART0>; + clock-names = "ipg"; + dmas = <&edma0 0 2>, <&edma0 0 3>; + dma-names = "rx","tx"; + }; diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt deleted file mode 100644 index 5c96d41899f1..000000000000 --- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Freescale MXS Application UART (AUART) - -Required properties for all SoCs: -- compatible : Should be one of fallowing variants: - "fsl,imx23-auart" - Freescale i.MX23 - "fsl,imx28-auart" - Freescale i.MX28 - "alphascale,asm9260-auart" - Alphascale ASM9260 -- reg : Address and length of the register set for the device -- interrupts : Should contain the auart interrupt numbers -- dmas: DMA specifier, consisting of a phandle to DMA controller node - and AUART DMA channel ID. - Refer to dma.txt and fsl-mxs-dma.txt for details. -- dma-names: "rx" for RX channel, "tx" for TX channel. - -Required properties for "alphascale,asm9260-auart": -- clocks : the clocks feeding the watchdog timer. See clock-bindings.txt -- clock-names : should be set to - "mod" - source for tick counter. - "ahb" - ahb gate. - -Optional properties: -- uart-has-rtscts : Indicate the UART has RTS and CTS lines - for hardware flow control, - it also means you enable the DMA support for this UART. -- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD - line respectively. It will use specified PIO instead of the peripheral - function pin for the USART feature. - If unsure, don't specify this property. - -Example: -auart0: serial@8006a000 { - compatible = "fsl,imx28-auart", "fsl,imx23-auart"; - reg = <0x8006a000 0x2000>; - interrupts = <112>; - dmas = <&dma_apbx 8>, <&dma_apbx 9>; - dma-names = "rx", "tx"; - cts-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - dsr-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - dcd-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; -}; - -Note: Each auart port should have an alias correctly numbered in "aliases" -node. - -Example: - -aliases { - serial0 = &auart0; - serial1 = &auart1; - serial2 = &auart2; - serial3 = &auart3; - serial4 = &auart4; -}; diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml new file mode 100644 index 000000000000..ce1d89496342 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/fsl-mxs-auart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS Application UART (AUART) + +maintainers: + - Fabio Estevam <fabio.estevam@nxp.com> + +allOf: + - $ref: "serial.yaml" + +properties: + compatible: + enum: + - fsl,imx23-auart + - fsl,imx28-auart + - alphascale,asm9260-auart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + + clocks: + items: + - description: mod clock + - description: ahb clock + minItems: 1 + + clock-names: + items: + - const: mod + - const: ahb + minItems: 1 + + uart-has-rtscts: true + rts-gpios: true + cts-gpios: true + dtr-gpios: true + dsr-gpios: true + rng-gpios: true + dcd-gpios: true + +if: + properties: + compatible: + contains: + enum: + - alphascale,asm9260-auart +then: + required: + - clocks + - clock-names + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + +unevaluatedProperties: false + +examples: + - | + aliases { + serial0 = &auart0; + }; + + auart0: serial@8006a000 { + compatible = "fsl,imx28-auart"; + reg = <0x8006a000 0x2000>; + interrupts = <112>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; + clocks = <&clks 45>; + }; diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml index dc8349322c83..559213899d73 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml @@ -9,6 +9,9 @@ title: Ingenic SoCs UART controller devicetree bindings maintainers: - Paul Cercueil <paul@crapouillou.net> +allOf: + - $ref: /schemas/serial.yaml# + properties: $nodename: pattern: "^serial@[0-9a-f]+$" @@ -64,6 +67,8 @@ required: - dmas - dma-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/jz4780-cgu.h> diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 3a3b57079f0d..647b5aee86f3 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -19,6 +19,7 @@ Required properties: * "mediatek,mt8135-uart" for MT8135 compatible UARTS * "mediatek,mt8173-uart" for MT8173 compatible UARTS * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS + * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS * "mediatek,mt8516-uart" for MT8516 compatible UARTS * "mediatek,mt6577-uart" for MT6577 and all of the above diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index 6b04c0451d41..c139c5edb93e 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -42,6 +42,7 @@ properties: - renesas,hscif-r8a774a1 # RZ/G2M - renesas,hscif-r8a774b1 # RZ/G2N - renesas,hscif-r8a774c0 # RZ/G2E + - renesas,hscif-r8a774e1 # RZ/G2H - renesas,hscif-r8a7795 # R-Car H3 - renesas,hscif-r8a7796 # R-Car M3-W - renesas,hscif-r8a77961 # R-Car M3-W+ @@ -100,6 +101,8 @@ required: - clock-names - power-domains +unevaluatedProperties: false + if: properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml index 4183b7311f37..22ed2f0b1dc3 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml @@ -54,6 +54,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: - | aliases { diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 570b379f9f19..eda3d2c6bdd3 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -51,6 +51,7 @@ properties: - renesas,scif-r8a774a1 # RZ/G2M - renesas,scif-r8a774b1 # RZ/G2N - renesas,scif-r8a774c0 # RZ/G2E + - renesas,scif-r8a774e1 # RZ/G2H - renesas,scif-r8a7795 # R-Car H3 - renesas,scif-r8a7796 # R-Car M3-W - renesas,scif-r8a77961 # R-Car M3-W+ @@ -149,6 +150,8 @@ then: required: - resets +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/r8a7791-cpg-mssr.h> diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml index 78b8e20dd34d..dbffb9534835 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml @@ -75,6 +75,8 @@ required: - clock-names - power-domains +unevaluatedProperties: false + if: properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml index b083970c16a9..147f8a37e02a 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml @@ -75,6 +75,8 @@ required: - clock-names - power-domains +unevaluatedProperties: false + if: properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index fe90569475e1..0c9fa694f85c 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -45,4 +45,7 @@ properties: rs485-term-gpios: description: GPIO pin to enable RS485 bus termination. maxItems: 1 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 96414ac65d06..21ee627b2ced 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -68,6 +68,8 @@ required: - interrupts - reg +additionalProperties: false + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 8645d0e526b4..65e75d040521 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -124,6 +124,8 @@ patternProperties: required: - compatible +additionalProperties: true + examples: - | serial@1234 { diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index b962f8db4ce9..87ef1e218152 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -101,6 +101,8 @@ required: - reg - interrupts +unevaluatedProperties: false + examples: - | serial@80230000 { diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml index 09a30300850c..d490c7c4b967 100644 --- a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml +++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml @@ -32,6 +32,8 @@ required: - interrupts - clocks +additionalProperties: false + examples: - | aliases { diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml index e66b2e92a7fc..09f6283f3cae 100644 --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml @@ -56,6 +56,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml index 3cbf2d28a188..80d99861fec5 100644 --- a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml +++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml @@ -35,6 +35,8 @@ required: - compatible - reg +additionalProperties: true + examples: - | bus@30000000 { diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index bd04fdb57414..84671950ca0d 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -173,6 +173,7 @@ patternProperties: - compatible - interrupts +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml index 468d658ce3e7..2684f22a1d85 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -20,7 +20,7 @@ description: | present and this subnode may contain children that designate regulator resources. - Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt + Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml for information on the regulator subnodes that can exist under the rpm_requests. diff --git a/Documentation/devicetree/bindings/sound/ak4458.txt b/Documentation/devicetree/bindings/sound/ak4458.txt index e5820235e0d5..0416c14895d6 100644 --- a/Documentation/devicetree/bindings/sound/ak4458.txt +++ b/Documentation/devicetree/bindings/sound/ak4458.txt @@ -10,6 +10,11 @@ Required properties: Optional properties: - reset-gpios: A GPIO specifier for the power down & reset pin - mute-gpios: A GPIO specifier for the soft mute pin +- AVDD-supply: Analog power supply +- DVDD-supply: Digital power supply +- dsd-path: Select DSD input pins for ak4497 + 0: select #16, #17, #19 pins + 1: select #3, #4, #5 pins Example: diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt index 7d67ca6ced80..36934098170c 100644 --- a/Documentation/devicetree/bindings/sound/ak5558.txt +++ b/Documentation/devicetree/bindings/sound/ak5558.txt @@ -10,6 +10,8 @@ Required properties: Optional properties: - reset-gpios: A GPIO specifier for the power down & reset pin. +- AVDD-supply: Analog power supply +- DVDD-supply: Digital power supply Example: diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml index 55d28268d2f4..67405e6d8168 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml @@ -15,7 +15,11 @@ properties: const: 0 compatible: - const: allwinner,sun8i-a33-codec + oneOf: + - items: + - const: allwinner,sun50i-a64-codec + - const: allwinner,sun8i-a33-codec + - const: allwinner,sun8i-a33-codec reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml index 7a7f28469624..f50558ed914f 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml @@ -75,6 +75,8 @@ required: - reg - resets +additionalProperties: false + examples: - | #include <dt-bindings/clock/gxbb-clkc.h> diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml index b4b3828c40af..3c3891d17238 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml @@ -37,6 +37,8 @@ required: - reg - resets +additionalProperties: false + examples: - | #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index fb374c659be1..db61f0731a20 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -84,6 +84,8 @@ required: - model - dai-link-0 +additionalProperties: false + examples: - | sound { diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml index 04014e658c90..c7613ea728d4 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml @@ -42,6 +42,8 @@ required: - clock-names - resets +additionalProperties: false + examples: - | #include <dt-bindings/clock/g12a-clkc.h> diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml new file mode 100644 index 000000000000..156560b2a980 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs4234.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic cs4234 audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +description: + The CS4234 is a highly versatile CODEC that combines 4 channels of + high performance analog to digital conversion, 4 channels of high + performance digital to analog conversion for audio, and 1 channel of + digital to analog conversion to provide a nondelayed audio reference + signal to an external Class H tracking power supply. If not used to + drive a tracking power supply, the 5th DAC can instead be used as a + standard audio grade DAC, with performance specifications identical + to that of the 4 DACs in the audio path. Additionally, the CS4234 + includes tunable group delay for each of the 4 audio DAC paths to + provide lead time for the external switch-mode power supply, and a + nondelayed path into the DAC outputs for input signals requiring a + low-latency path to the outputs. + +properties: + compatible: + enum: + - cirrus,cs4234 + + reg: + description: + The 7-bit I2C address depends on the state of the ADx pins, in + binary given by [0 0 1 0 AD2 AD1 AD0 0]. + items: + minimum: 0x10 + maximum: 0x17 + + VA-supply: + description: + Analogue power supply. + + VL-supply: + description: + Interface power supply. + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - VA-supply + - VL-supply + +additionalProperties: false + +examples: + - | + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + cs4234: codec@11 { + compatible = "cirrus,cs4234"; + reg = <0x11>; + + VA-supply = <&vdd3v3>; + VL-supply = <&vdd3v3>; + + reset-gpios = <&gpio 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml index 5bcb643c288f..0d87e2c86a42 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml @@ -46,6 +46,8 @@ required: - reg - "#sound-dai-cells" +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml index c4cd58b5acd4..23138ddcb62d 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml @@ -111,3 +111,5 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml index 32d547af9ce7..bdde68a1059c 100644 --- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml @@ -74,6 +74,8 @@ required: - fsl,asrc-rate - fsl,asrc-format +additionalProperties: false + examples: - | #include <dt-bindings/clock/imx8mn-clock.h> diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt deleted file mode 100644 index e1365b0ee1e9..000000000000 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ /dev/null @@ -1,68 +0,0 @@ -Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller - -The Freescale S/PDIF audio block is a stereo transceiver that allows the -processor to receive and transmit digital audio via an coaxial cable or -a fibre cable. - -Required properties: - - - compatible : Compatible list, should contain one of the following - compatibles: - "fsl,imx35-spdif", - "fsl,vf610-spdif", - "fsl,imx6sx-spdif", - - - reg : Offset and length of the register set for the device. - - - interrupts : Contains the spdif interrupt. - - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. - - - dma-names : Two dmas have to be defined, "tx" and "rx". - - - clocks : Contains an entry for each entry in clock-names. - - - clock-names : Includes the following entries: - "core" The core clock of spdif controller. - "rxtx<0-7>" Clock source list for tx and rx clock. - This clock list should be identical to the source - list connecting to the spdif clock mux in "SPDIF - Transceiver Clock Diagram" of SoC reference manual. - It can also be referred to TxClk_Source bit of - register SPDIF_STC. - "spba" The spba clock is required when SPDIF is placed as a - bus slave of the Shared Peripheral Bus and when two - or more bus masters (CPU, DMA or DSP) try to access - it. This property is optional depending on the SoC - design. - -Optional properties: - - - big-endian : If this property is absent, the native endian mode - will be in use as default, or the big endian mode - will be in use for all the device registers. - -Example: - -spdif: spdif@2004000 { - compatible = "fsl,imx35-spdif"; - reg = <0x02004000 0x4000>; - interrupts = <0 52 0x04>; - dmas = <&sdma 14 18 0>, - <&sdma 15 18 0>; - dma-names = "rx", "tx"; - - clocks = <&clks 197>, <&clks 3>, - <&clks 197>, <&clks 107>, - <&clks 0>, <&clks 118>, - <&clks 62>, <&clks 139>, - <&clks 0>; - clock-names = "core", "rxtx0", - "rxtx1", "rxtx2", - "rxtx3", "rxtx4", - "rxtx5", "rxtx6", - "rxtx7"; - - big-endian; -}; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml new file mode 100644 index 000000000000..2ac671f5cb9b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +description: | + The Freescale S/PDIF audio block is a stereo transceiver that allows the + processor to receive and transmit digital audio via an coaxial cable or + a fibre cable. + +properties: + compatible: + enum: + - fsl,imx35-spdif + - fsl,vf610-spdif + - fsl,imx6sx-spdif + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + + clocks: + items: + - description: The core clock of spdif controller. + - description: Clock for tx0 and rx0. + - description: Clock for tx1 and rx1. + - description: Clock for tx2 and rx2. + - description: Clock for tx3 and rx3. + - description: Clock for tx4 and rx4. + - description: Clock for tx5 and rx5. + - description: Clock for tx6 and rx6. + - description: Clock for tx7 and rx7. + - description: The spba clock is required when SPDIF is placed as a bus + slave of the Shared Peripheral Bus and when two or more bus masters + (CPU, DMA or DSP) try to access it. This property is optional depending + on the SoC design. + minItems: 9 + + clock-names: + items: + - const: core + - const: rxtx0 + - const: rxtx1 + - const: rxtx2 + - const: rxtx3 + - const: rxtx4 + - const: rxtx5 + - const: rxtx6 + - const: rxtx7 + - const: spba + minItems: 9 + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: | + If this property is absent, the native endian mode will be in use + as default, or the big endian mode will be in use for all the device + registers. Set this flag for HCDs with big endian descriptors and big + endian registers. + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + spdif@2004000 { + compatible = "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks 197>, <&clks 3>, + <&clks 197>, <&clks 107>, + <&clks 0>, <&clks 118>, + <&clks 62>, <&clks 139>, + <&clks 0>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7"; + big-endian; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index 63ebf52b43e8..f339be62e7e4 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -38,6 +38,8 @@ The compatible list for this generic sound card currently: "fsl,imx-audio-wm8524" + "fsl,imx-audio-tlv320aic32x4" + Required properties: - compatible : Contains one of entries in the compatible list. diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml index c84e656afb0a..3b9143af2c7c 100644 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -13,7 +13,7 @@ description: | Google's ChromeOS EC codec is a digital mic codec provided by the Embedded Controller (EC) and is controlled via a host-command interface. An EC codec node should only be found as a sub-node of the EC node (see - Documentation/devicetree/bindings/mfd/cros-ec.txt). + Documentation/devicetree/bindings/mfd/google,cros-ec.yaml). properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/hdmi.txt b/Documentation/devicetree/bindings/sound/hdmi.txt deleted file mode 100644 index 56407c30e954..000000000000 --- a/Documentation/devicetree/bindings/sound/hdmi.txt +++ /dev/null @@ -1,16 +0,0 @@ -Device-Tree bindings for dummy HDMI codec - -Required properties: - - compatible: should be "linux,hdmi-audio". - -CODEC output pins: - * TX - -CODEC input pins: - * RX - -Example node: - - hdmi_audio: hdmi_audio@0 { - compatible = "linux,hdmi-audio"; - }; diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml index 2e0bbc1c868a..d346e61ab708 100644 --- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml @@ -17,6 +17,7 @@ properties: compatible: enum: - intel,keembay-i2s + - intel,keembay-tdm "#sound-dai-cells": const: 0 @@ -52,6 +53,8 @@ required: - clock-names - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt index 7e1bbd5c27fd..39d640294c62 100644 --- a/Documentation/devicetree/bindings/sound/max98090.txt +++ b/Documentation/devicetree/bindings/sound/max98090.txt @@ -55,5 +55,5 @@ audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml new file mode 100644 index 000000000000..7d8bd4e14434 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mchp,spdifrx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip S/PDIF Rx Controller Device Tree Bindings + +maintainers: + - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> + +description: + The Microchip Sony/Philips Digital Interface Receiver is a + serial port compliant with the IEC-60958 standard. + +properties: + "#sound-dai-cells": + const: 0 + + compatible: + const: microchip,sama7g5-spdifrx + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Peripheral Bus Clock + - description: Generic Clock + + clock-names: + items: + - const: pclk + - const: gclk + + dmas: + description: RX DMA Channel + maxItems: 1 + + dma-names: + const: rx + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spdifrx: spdifrx@e1614000 { + #sound-dai-cells = <0>; + compatible = "microchip,sama7g5-spdifrx"; + reg = <0xe1614000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>; + dma-names = "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>; + clock-names = "pclk", "gclk"; + }; diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml new file mode 100644 index 000000000000..a03b0b871fc9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mchp,spdiftx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip S/PDIF Tx Controller Device Tree Bindings + +maintainers: + - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> + +description: + The Microchip Sony/Philips Digital Interface Transmitter is a + serial port compliant with the IEC-60958 standard. + +properties: + "#sound-dai-cells": + const: 0 + + compatible: + const: microchip,sama7g5-spdiftx + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Peripheral Bus Clock + - description: Generic Clock + + clock-names: + items: + - const: pclk + - const: gclk + + dmas: + description: TX DMA Channel + maxItems: 1 + + dma-names: + const: tx + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spdiftx@e1618000 { + #sound-dai-cells = <0>; + compatible = "microchip,sama7g5-spdiftx"; + reg = <0xe1618000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>; + dma-names = "tx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>; + clock-names = "pclk", "gclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdiftx_default>; + }; diff --git a/Documentation/devicetree/bindings/sound/mt6359.yaml b/Documentation/devicetree/bindings/sound/mt6359.yaml new file mode 100644 index 000000000000..a54f466f769d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mt6359.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mt6359.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT6359 Codec Device Tree Bindings + +maintainers: + - Eason Yen <eason.yen@mediatek.com> + - Jiaxin Yu <jiaxin.yu@mediatek.com> + - Shane Chien <shane.chien@mediatek.com> + +description: | + The communication between MT6359 and SoC is through Mediatek PMIC wrapper. + For more detail, please visit Mediatek PMIC wrapper documentation. + Must be a child node of PMIC wrapper. + +properties: + mediatek,dmic-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Indicates how many data pins are used to transmit two channels of PDM + signal. 0 means two wires, 1 means one wire. Default value is 0. + enum: + - 0 # one wire + - 1 # two wires + + mediatek,mic-type-0: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the type of mic type connected to adc0 + + enum: + - 0 # IDLE - mic in turn-off status + - 1 # ACC - analog mic with alternating coupling + - 2 # DMIC - digital mic + - 3 # DCC - analog mic with direct couping + - 4 # DCC_ECM_DIFF - analog electret condenser mic with differential mode + - 5 # DCC_ECM_SINGLE - analog electret condenser mic with single mode + + mediatek,mic-type-1: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the type of mic type connected to adc1 + + mediatek,mic-type-2: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the type of mic type connected to adc2 + +additionalProperties: false + +examples: + - | + mt6359codec: mt6359codec { + mediatek,dmic-mode = <0>; + mediatek,mic-type-0 = <2>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt index 6787ce8789dd..f276dfc74b46 100644 --- a/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt +++ b/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt @@ -3,6 +3,7 @@ MT8183 with MT6358, DA7219, MAX98357, and RT1015 CODECS Required properties: - compatible : "mediatek,mt8183_da7219_max98357" for MAX98357A codec "mediatek,mt8183_da7219_rt1015" for RT1015 codec + "mediatek,mt8183_da7219_rt1015p" for RT1015P codec - mediatek,headset-codec: the phandles of da7219 codecs - mediatek,platform: the phandle of MT8183 ASoC platform diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml index 2f2fcffa65cb..ed2fb32fcdd4 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml @@ -64,6 +64,8 @@ required: - assigned-clock-parents - sound-name-prefix +additionalProperties: false + examples: - | #include<dt-bindings/clock/tegra186-clock.h> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml index 41c77f45d2fd..c028b259e822 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml @@ -81,6 +81,8 @@ required: - dmas - dma-names +additionalProperties: false + examples: - | admaif@702d0000 { diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml index 44ee9d844ae0..d77219727768 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml @@ -67,6 +67,9 @@ required: - "#size-cells" - ranges +additionalProperties: + type: object + examples: - | #include<dt-bindings/clock/tegra210-car.h> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml index 8689d9f18c11..2a3207b550e7 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml @@ -64,6 +64,8 @@ required: - assigned-clocks - assigned-clock-parents +additionalProperties: false + examples: - | #include<dt-bindings/clock/tegra210-car.h> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index 9bbf18153d63..dfc1bf7b7722 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -82,6 +82,8 @@ required: - assigned-clocks - assigned-clock-parents +additionalProperties: false + examples: - | #include<dt-bindings/clock/tegra210-car.h> diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt index 84b28dbe9f15..23998262a0a7 100644 --- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt +++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt @@ -34,6 +34,13 @@ Required properties: * DMIC * Ext Spk +Optional properties: + +- aux-devs : A list of phandles for auxiliary devices (e.g. analog + amplifiers) that do not appear directly within the DAI + links. Should be connected to another audio component + using "qcom,audio-routing". + Dai-link subnode properties and subnodes: Required dai-link subnodes: diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt index c814e867850f..e1b9fa8a5bf8 100644 --- a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt +++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt @@ -55,6 +55,14 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio. Value type: <stringlist> Definition: The user-visible name of this sound card. +- aux-devs + Usage: optional + Value type: <array of phandles> + Definition: A list of phandles for auxiliary devices (e.g. analog + amplifiers) that do not appear directly within the DAI + links. Should be connected to another audio component + using "audio-routing". + = dailinks Each subnode of sndcard represents either a dailink, and subnodes of each dailinks would be cpu/codec/platform dais. diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt deleted file mode 100644 index 32c2cdb3d32f..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt +++ /dev/null @@ -1,79 +0,0 @@ -* Qualcomm Technologies LPASS CPU DAI - -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS). - -Required properties: - -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" -- clocks : Must contain an entry for each entry in clock-names. -- clock-names : A list which must include the following entries: - * "ahbix-clk" - * "mi2s-osr-clk" - * "mi2s-bit-clk" - : required clocks for "qcom,lpass-cpu-apq8016" - * "ahbix-clk" - * "mi2s-bit-clk0" - * "mi2s-bit-clk1" - * "mi2s-bit-clk2" - * "mi2s-bit-clk3" - * "pcnoc-mport-clk" - * "pcnoc-sway-clk" - -- interrupts : Must contain an entry for each entry in - interrupt-names. -- interrupt-names : A list which must include the following entries: - * "lpass-irq-lpaif" -- pinctrl-N : One property must exist for each entry in - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt - for details of the property values. -- pinctrl-names : Must contain a "default" entry. -- reg : Must contain an address for each entry in reg-names. -- reg-names : A list which must include the following entries: - * "lpass-lpaif" -- #address-cells : Must be 1 -- #size-cells : Must be 0 - - - -Optional properties: - -- qcom,adsp : Phandle for the audio DSP node - -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels. -The SD lines to use can be configured by adding subnodes for each of the DAIs. - -Required properties for each DAI (represented by a subnode): -- reg : Must be one of the DAI IDs - (usually part of dt-bindings header) -- qcom,playback-sd-lines: List of serial data lines to use for playback - Each SD line should be represented by a number from 0-3. -- qcom,capture-sd-lines : List of serial data lines to use for capture - Each SD line should be represented by a number from 0-3. - -Note that adding a subnode changes the default to "no lines configured", -so both playback and capture lines should be configured when a subnode is added. - -Example: - -lpass@28100000 { - compatible = "qcom,lpass-cpu"; - clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>; - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk"; - interrupts = <0 85 1>; - interrupt-names = "lpass-irq-lpaif"; - pinctrl-names = "default", "idle"; - pinctrl-0 = <&mi2s_default>; - pinctrl-1 = <&mi2s_idle>; - reg = <0x28100000 0x10000>; - reg-names = "lpass-lpaif"; - qcom,adsp = <&adsp>; - - #address-cells = <1>; - #size-cells = <0>; - - /* Optional to set different MI2S SD lines */ - dai@3 { - reg = <MI2S_QUATERNARY>; - qcom,playback-sd-lines = <0 1>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml new file mode 100644 index 000000000000..f6f9fb49f385 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + - Rohit kumar <rohitkr@codeaurora.org> + +description: | + Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist + of MI2S interface for audio data transfer on external codecs. LPASS cpu driver + is a module to configure Low-Power Audio Interface(LPAIF) core registers + across different IP versions. + +properties: + compatible: + enum: + - qcom,lpass-cpu + - qcom,apq8016-lpass-cpu + - qcom,sc7180-lpass-cpu + + reg: + maxItems: 2 + description: LPAIF core registers + reg-names: + maxItems: 2 + clocks: + minItems: 3 + maxItems: 6 + + clock-names: + minItems: 3 + maxItems: 6 + + interrupts: + maxItems: 2 + description: LPAIF DMA buffer interrupt + interrupt-names: + maxItems: 2 + qcom,adsp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle for the audio DSP node + + iommus: + maxItems: 2 + description: Phandle to apps_smmu node with sid mask + + power-domains: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^dai-link@[0-9a-f]$": + type: object + description: | + LPASS CPU dai node for each I2S device. Bindings of each node + depends on the specific driver providing the functionality and + properties. + properties: + reg: + maxItems: 1 + description: Must be one of the DAI ID + + qcom,playback-sd-lines: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: list of MI2S data lines for playback + + qcom,capture-sd-lines: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: list of MI2S data lines for capture + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - '#sound-dai-cells' + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,lpass-cpu + + then: + properties: + clock-names: + items: + - const: ahbix-clk + - const: mi2s-osr-clk + - const: mi2s-bit-clk + + - if: + properties: + compatible: + contains: + const: qcom,apq8016-lpass-cpu + + then: + properties: + clock-names: + items: + - const: ahbix-clk + - const: mi2s-bit-clk0 + - const: mi2s-bit-clk1 + - const: mi2s-bit-clk2 + - const: mi2s-bit-clk3 + - const: pcnoc-mport-clk + - const: pcnoc-sway-clk + + - if: + properties: + compatible: + contains: + const: qcom,sc7180-lpass-cpu + + then: + properties: + clock-names: + oneOf: + - items: #for I2S + - const: pcnoc-sway-clk + - const: audio-core + - const: mclk0 + - const: pcnoc-mport-clk + - const: mi2s-bit-clk0 + - const: mi2s-bit-clk1 + - items: #for HDMI + - const: pcnoc-sway-clk + - const: audio-core + - const: pcnoc-mport-clk + reg-names: + anyOf: + - items: #for I2S + - const: lpass-lpaif + - items: #for I2S and HDMI + - const: lpass-hdmiif + - const: lpass-lpaif + interrupt-names: + anyOf: + - items: #for I2S + - const: lpass-irq-lpaif + - items: #for I2S and HDMI + - const: lpass-irq-lpaif + - const: lpass-irq-hdmi + required: + - iommus + - power-domains + +examples: + - | + #include <dt-bindings/sound/sc7180-lpass.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + lpass@62d80000 { + compatible = "qcom,sc7180-lpass-cpu"; + + reg = <0 0x62d87000 0 0x68000>, + <0 0x62f00000 0 0x29000>; + reg-names = "lpass-hdmiif", + "lpass-lpaif"; + iommus = <&apps_smmu 0x1020 0>, + <&apps_smmu 0x1032 0>; + power-domains = <&lpass_hm 0>; + + clocks = <&gcc 131>, + <&lpasscorecc 6>, + <&lpasscorecc 7>, + <&lpasscorecc 10>, + <&lpasscorecc 8>, + <&lpasscorecc 9>; + + clock-names = "pcnoc-sway-clk", "audio-core", + "mclk0", "pcnoc-mport-clk", + "mi2s-bit-clk0", "mi2s-bit-clk1"; + + interrupts = <0 160 1>, + <0 268 1>; + interrupt-names = "lpass-irq-lpaif", + "lpass-irq-hdmi"; + #sound-dai-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + /* Optional to set different MI2S SD lines */ + dai-link@0 { + reg = <MI2S_PRIMARY>; + qcom,playback-sd-lines = <1>; + qcom,capture-sd-lines = <0>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt index 4916dd6a0896..2d6fb2ea75a0 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt @@ -98,6 +98,24 @@ configuration of each dai. Must contain the following properties. 0 - MSB 1 - LSB += AFE CLOCKSS +"clocks" subnode of the AFE node. It represents q6afe clocks +"clocks" node should have following properties. +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be "qcom,q6afe-clocks" + +- #clock-cells: + Usage: required + Value type: <u32> + Definition: Must be 2. Clock Id followed by + below valid clock coupling attributes. + 1 - for no coupled clock + 2 - for dividend of the coupled clock + 3 - for divisor of the coupled clock + 4 - for inverted and no couple clock + = EXAMPLE apr-service@4 { @@ -175,4 +193,9 @@ apr-service@4 { qcom,sd-lines = <1>; }; }; + + clocks { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt index ca8c89e88bfa..de4c604641da 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt +++ b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt @@ -24,6 +24,14 @@ This binding describes the SDM845 sound card, which uses qdsp for audio. Value type: <stringlist> Definition: The user-visible name of this sound card. +- aux-devs + Usage: optional + Value type: <array of phandles> + Definition: A list of phandles for auxiliary devices (e.g. analog + amplifiers) that do not appear directly within the DAI + links. Should be connected to another audio component + using "audio-routing". + = dailinks Each subnode of sndcard represents either a dailink, and subnodes of each dailinks would be cpu/codec/platform dais. diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml new file mode 100644 index 000000000000..def1db298eac --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt1015p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek rt1015p codec devicetree bindings + +maintainers: + - Tzung-Bi Shih <tzungbi@google.com> + +description: | + Rt1015p is a rt1015 variant which does not support I2C and + only supports S24, 48kHz, 64FS. + +properties: + compatible: + const: realtek,rt1015p + + sdb-gpios: + description: + GPIO used for shutdown control. + 0 means shut down; 1 means power on. + maxItems: 1 + +required: + - compatible + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + rt1015p: rt1015p { + compatible = "realtek,rt1015p"; + sdb-gpios = <&pio 175 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml index 5b85ad5e4834..75b3b33b5f1f 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml @@ -53,6 +53,8 @@ required: - rockchip,grf - "#sound-dai-cells" +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml index 7bad6f16fe60..62a61b68dfef 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml @@ -27,6 +27,7 @@ properties: - enum: - rockchip,rk3188-spdif - rockchip,rk3288-spdif + - rockchip,rk3308-spdif - const: rockchip,rk3066-spdif reg: diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt index e40e4893eed8..ff1228713f7e 100644 --- a/Documentation/devicetree/bindings/sound/rt5640.txt +++ b/Documentation/devicetree/bindings/sound/rt5640.txt @@ -88,7 +88,7 @@ rt5640 { compatible = "realtek,rt5640"; reg = <0x1c>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt index 1766e0543fc5..56788f50b6cf 100644 --- a/Documentation/devicetree/bindings/sound/rt5659.txt +++ b/Documentation/devicetree/bindings/sound/rt5659.txt @@ -72,7 +72,7 @@ rt5659 { compatible = "realtek,rt5659"; reg = <0x1b>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5665.txt b/Documentation/devicetree/bindings/sound/rt5665.txt index 8df170506986..f6ca96b4ce98 100644 --- a/Documentation/devicetree/bindings/sound/rt5665.txt +++ b/Documentation/devicetree/bindings/sound/rt5665.txt @@ -62,7 +62,7 @@ rt5659 { compatible = "realtek,rt5665"; reg = <0x1b>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5668.txt b/Documentation/devicetree/bindings/sound/rt5668.txt index c88b96e7764b..a2b7e9a2f2f3 100644 --- a/Documentation/devicetree/bindings/sound/rt5668.txt +++ b/Documentation/devicetree/bindings/sound/rt5668.txt @@ -41,7 +41,7 @@ rt5668 { compatible = "realtek,rt5668b"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; realtek,dmic1-data-pin = <1>; diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt index 1b3c13d206ff..da2430099181 100644 --- a/Documentation/devicetree/bindings/sound/rt5677.txt +++ b/Documentation/devicetree/bindings/sound/rt5677.txt @@ -64,7 +64,7 @@ rt5677 { compatible = "realtek,rt5677"; reg = <0x2c>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt index ade1ece8b45f..707fa98d1310 100644 --- a/Documentation/devicetree/bindings/sound/rt5682.txt +++ b/Documentation/devicetree/bindings/sound/rt5682.txt @@ -58,7 +58,7 @@ rt5682 { compatible = "realtek,rt5682i"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; realtek,dmic1-data-pin = <1>; diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml index 902a0b66628e..1c6947294825 100644 --- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml @@ -11,12 +11,11 @@ maintainers: properties: compatible: - oneOf: - - const: samsung,aries-wm8994 - description: With FM radio and modem master - - - const: samsung,fascinate4g-wm8994 - description: Without FM radio and modem slave + enum: + # With FM radio and modem master + - samsung,aries-wm8994 + # Without FM radio and modem slave + - samsung,fascinate4g-wm8994 model: $ref: /schemas/types.yaml#/definitions/string diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml index 1c755de686f7..578928e67e5c 100644 --- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml @@ -21,7 +21,8 @@ properties: type: object properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 description: phandle to the I2S controller required: - sound-dai @@ -30,7 +31,8 @@ properties: type: object properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 description: phandle to the WM1811 CODEC required: - sound-dai diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml index 8ff2d39e7d17..e8122bc87362 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml @@ -28,6 +28,11 @@ properties: $ref: /schemas/types.yaml#/definitions/string description: The user-visible name of this sound complex. + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + clocks: true + cpu: type: object properties: diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml index b2ad093d94df..2e3628ef48df 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml @@ -41,6 +41,12 @@ properties: - samsung,exynos7-i2s - samsung,exynos7-i2s1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + reg: maxItems: 1 @@ -58,6 +64,9 @@ properties: - const: rx - const: tx-sec + assigned-clock-parents: true + assigned-clocks: true + clocks: minItems: 1 maxItems: 3 @@ -92,6 +101,9 @@ properties: - const: i2s_cdclk2 description: Names of the CDCLK I2S output clocks. + interrupts: + maxItems: 1 + samsung,idma-addr: $ref: /schemas/types.yaml#/definitions/uint32 description: | @@ -104,6 +116,9 @@ properties: pinctrl-names: const: default + power-domains: + maxItems: 1 + "#sound-dai-cells": const: 1 diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml index 4f29b63c54d3..d116c174b545 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml @@ -19,6 +19,10 @@ properties: "#sound-dai-cells": const: 0 + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + clocks: items: - description: the clock provider of SYS_MCLK diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt deleted file mode 100644 index dc6d7362ded7..000000000000 --- a/Documentation/devicetree/bindings/sound/tas2562.txt +++ /dev/null @@ -1,37 +0,0 @@ -Texas Instruments TAS2562 Smart PA - -The TAS2562 is a mono, digital input Class-D audio amplifier optimized for -efficiently driving high peak power into small loudspeakers. -Integrated speaker voltage and current sense provides for -real time monitoring of loudspeaker behavior. - -Required properties: - - #address-cells - Should be <1>. - - #size-cells - Should be <0>. - - compatible: - Should contain "ti,tas2562", "ti,tas2563". - - reg: - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f. - - ti,imon-slot-no:- TDM TX current sense time slot. - - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be - greater then ti,imon-slot-no. - -Optional properties: -- interrupt-parent: phandle to the interrupt controller which provides - the interrupt. -- interrupts: (GPIO) interrupt to which the chip is connected. -- shut-down-gpio: GPIO used to control the state of the device. - -Examples: -tas2562@4c { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,tas2562"; - reg = <0x4c>; - - interrupt-parent = <&gpio1>; - interrupts = <14>; - - shut-down-gpio = <&gpio1 15 0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <1>; -}; - diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index 8d75a798740b..27f7132ba2ef 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -16,11 +16,19 @@ description: | Integrated speaker voltage and current sense provides for real time monitoring of loudspeaker behavior. + Specifications about the audio amplifier can be found at: + https://www.ti.com/lit/gpn/tas2562 + https://www.ti.com/lit/gpn/tas2563 + https://www.ti.com/lit/gpn/tas2564 + https://www.ti.com/lit/gpn/tas2110 + properties: compatible: enum: - ti,tas2562 - ti,tas2563 + - ti,tas2564 + - ti,tas2110 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/tas2764.yaml b/Documentation/devicetree/bindings/sound/tas2764.yaml new file mode 100644 index 000000000000..5bf8c76ecda1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2764.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/tas2764.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments TAS2764 Smart PA + +maintainers: + - Dan Murphy <dmurphy@ti.com> + +description: | + The TAS2764 is a mono, digital input Class-D audio amplifier optimized for + efficiently driving high peak power into small loudspeakers. + Integrated speaker voltage and current sense provides for + real time monitoring of loudspeaker behavior. + +properties: + compatible: + enum: + - ti,tas2764 + + reg: + maxItems: 1 + description: | + I2C address of the device can be between 0x38 to 0x45. + + reset-gpios: + maxItems: 1 + description: GPIO used to reset the device. + + shutdown-gpios: + maxItems: 1 + description: GPIO used to control the state of the device. + + interrupts: + maxItems: 1 + + ti,imon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX current sense time slot. + + ti,vmon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX voltage sense time slot. + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@38 { + compatible = "ti,tas2764"; + reg = <0x38>; + #sound-dai-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + reset-gpios = <&gpio1 15 0>; + shutdown-gpios = <&gpio1 15 0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 33a90f829c80..07e7f9951d2e 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -24,11 +24,14 @@ properties: reg: maxItems: 1 description: | - I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + I2C address of the device can be between 0x41 to 0x48. reset-gpio: description: GPIO used to reset the device. + shutdown-gpios: + description: GPIO used to control the state of the device. + interrupts: maxItems: 1 @@ -41,6 +44,7 @@ properties: description: TDM TX voltage sense time slot. ti,asi-format: + deprecated: true $ref: /schemas/types.yaml#/definitions/uint32 description: Sets TDM RX capture edge. enum: @@ -62,13 +66,14 @@ examples: i2c0 { #address-cells = <1>; #size-cells = <0>; - codec: codec@4c { + codec: codec@41 { compatible = "ti,tas2770"; - reg = <0x4c>; + reg = <0x41>; #sound-dai-cells = <1>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpio = <&gpio1 15 0>; + shutdown-gpios = <&gpio1 14 0>; ti,imon-slot-no = <0>; ti,vmon-slot-no = <2>; }; diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml index d52cfbeb2d07..805da4d6a88e 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml @@ -18,18 +18,25 @@ description: | PLL15 (for 44.1KHz). The same PLLs are used for McASP10's AUXCLK clock via different HSDIVIDER. - Clocking setup for 48KHz family: - PLL4 ---> PLL4_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk - |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2 ---> pcm3168a.SCKI + Clocking setup for j721e: + 48KHz family: + PLL4 ---> PLL4_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk + |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2 ---> pcm3168a.SCKI - Clocking setup for 44.1KHz family: - PLL15 ---> PLL15_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk - |-> PLL15_HSDIV2 ---> AUDIO_REFCLK2 ---> pcm3168a.SCKI + 44.1KHz family: + PLL15 ---> PLL15_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk + |-> PLL15_HSDIV2 ---> AUDIO_REFCLK2 ---> pcm3168a.SCKI + + Clocking setup for j7200: + 48KHz family: + PLL4 ---> PLL4_HSDIV0 ---> MCASP0_AUXCLK ---> McASP0.auxclk + |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2 ---> pcm3168a.SCKI properties: compatible: - items: - - const: ti,j721e-cpb-audio + enum: + - ti,j721e-cpb-audio + - ti,j7200-cpb-audio model: $ref: /schemas/types.yaml#/definitions/string @@ -44,22 +51,12 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle clocks: - items: - - description: AUXCLK clock for McASP used by CPB audio - - description: Parent for CPB_McASP auxclk (for 48KHz) - - description: Parent for CPB_McASP auxclk (for 44.1KHz) - - description: SCKI clock for the pcm3168a codec on CPB - - description: Parent for CPB_SCKI clock (for 48KHz) - - description: Parent for CPB_SCKI clock (for 44.1KHz) + minItems: 4 + maxItems: 6 clock-names: - items: - - const: cpb-mcasp-auxclk - - const: cpb-mcasp-auxclk-48000 - - const: cpb-mcasp-auxclk-44100 - - const: cpb-codec-scki - - const: cpb-codec-scki-48000 - - const: cpb-codec-scki-44100 + minItems: 4 + maxItems: 6 required: - compatible @@ -71,6 +68,57 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: ti,j721e-cpb-audio + + then: + properties: + clocks: + minItems: 6 + items: + - description: AUXCLK clock for McASP used by CPB audio + - description: Parent for CPB_McASP auxclk (for 48KHz) + - description: Parent for CPB_McASP auxclk (for 44.1KHz) + - description: SCKI clock for the pcm3168a codec on CPB + - description: Parent for CPB_SCKI clock (for 48KHz) + - description: Parent for CPB_SCKI clock (for 44.1KHz) + + clock-names: + items: + - const: cpb-mcasp-auxclk + - const: cpb-mcasp-auxclk-48000 + - const: cpb-mcasp-auxclk-44100 + - const: cpb-codec-scki + - const: cpb-codec-scki-48000 + - const: cpb-codec-scki-44100 + + - if: + properties: + compatible: + contains: + const: ti,j7200-cpb-audio + + then: + properties: + clocks: + maxItems: 4 + items: + - description: AUXCLK clock for McASP used by CPB audio + - description: Parent for CPB_McASP auxclk (for 48KHz) + - description: SCKI clock for the pcm3168a codec on CPB + - description: Parent for CPB_SCKI clock (for 48KHz) + + clock-names: + items: + - const: cpb-mcasp-auxclk + - const: cpb-mcasp-auxclk-48000 + - const: cpb-codec-scki + - const: cpb-codec-scki-48000 + examples: - |+ sound { diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index f578f17f3e04..df18be9d7b15 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -108,6 +108,12 @@ properties: maximum: 7 default: [0, 0, 0, 0] + ti,asi-tx-drive: + type: boolean + description: | + When set the device will set the Tx ASI output to a Hi-Z state for unused + data cycles. Default is to drive the output low on unused ASI cycles. + patternProperties: '^ti,gpo-config-[1-4]$': $ref: /schemas/types.yaml#/definitions/uint32-array @@ -134,10 +140,55 @@ patternProperties: 4d - Drive weak low and active high 5d - Drive Hi-Z and active high + ti,gpio-config: + description: | + Defines the configuration and output drive for the General Purpose + Input and Output pin (GPIO1). Its value is a pair, the first value is for + the configuration type and the second value is for the output drive + type. The array is defined as <GPIO1_CFG GPIO1_DRV> + + configuration for the GPIO pin can be one of the following: + 0 - disabled + 1 - GPIO1 is configured as a general-purpose output (GPO) + 2 - (default) GPIO1 is configured as a device interrupt output (IRQ) + 3 - GPIO1 is configured as a secondary ASI output (SDOUT2) + 4 - GPIO1 is configured as a PDM clock output (PDMCLK) + 8 - GPIO1 is configured as an input to control when MICBIAS turns on or + off (MICBIAS_EN) + 9 - GPIO1 is configured as a general-purpose input (GPI) + 10 - GPIO1 is configured as a master clock input (MCLK) + 11 - GPIO1 is configured as an ASI input for daisy-chain (SDIN) + 12 - GPIO1 is configured as a PDM data input for channel 1 and channel 2 + (PDMDIN1) + 13 - GPIO1 is configured as a PDM data input for channel 3 and channel 4 + (PDMDIN2) + 14 - GPIO1 is configured as a PDM data input for channel 5 and channel 6 + (PDMDIN3) + 15 - GPIO1 is configured as a PDM data input for channel 7 and channel 8 + (PDMDIN4) + + output drive type for the GPIO pin can be one of the following: + 0 - Hi-Z output + 1 - Drive active low and active high + 2 - (default) Drive active low and weak high + 3 - Drive active low and Hi-Z + 4 - Drive weak low and active high + 5 - Drive Hi-Z and active high + + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 2 + maxItems: 2 + items: + maximum: 15 + default: [2, 2] + required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> @@ -150,6 +201,7 @@ examples: ti,mic-bias-source = <6>; ti,pdm-edge-select = <0 1 0 1>; ti,gpi-config = <4 5 6 7>; + ti,gpio-config = <10 2>; ti,gpo-config-1 = <0 0>; ti,gpo-config-2 = <0 0>; reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml index 22d54be7900a..1627c0bb69be 100644 --- a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml @@ -112,3 +112,5 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 12 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt index 436547f3b155..b104be131235 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt +++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt @@ -11,6 +11,7 @@ board specific bus parameters. Example: "qcom,soundwire-v1.3.0" "qcom,soundwire-v1.5.0" + "qcom,soundwire-v1.5.1" "qcom,soundwire-v1.6.0" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml index 330924b8618e..4aad121eff3f 100644 --- a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml +++ b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml @@ -57,6 +57,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: true + examples: - | soundwire@c2d0000 { diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 38efb50081e3..667dedefd69f 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -77,6 +77,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: - | spi@c1108d80 { diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml index 5f33c39d820b..54b6f15eca18 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml @@ -35,6 +35,8 @@ required: - reg - clocks +unevaluatedProperties: false + examples: - | spi@c1108c80 { diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt index f5e518d099f2..d99a9cf3336b 100644 --- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt +++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt @@ -23,8 +23,8 @@ Required properties: - compatible: Must be one of : - "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs - "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI + "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on BRCMSTB SoCs + "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi" : Second Instance of MSPI BRCMSTB SoCs "brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI BRCMSTB SoCs @@ -32,12 +32,14 @@ Required properties: BRCMSTB SoCs "brcm,spi-bcm7435-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI BRCMSTB SoCs + "brcm,spi-bcm7445-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI + BRCMSTB SoCs "brcm,spi-bcm7216-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI BRCMSTB SoCs "brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI BRCMSTB SoCs - "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi" : MSPI+BSPI on Cygnus, NSP - "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi" : NS2 SoCs + "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on Cygnus, NSP + "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi" : NS2 SoCs - reg: Define the bases and ranges of the associated I/O address spaces. @@ -86,7 +88,7 @@ BRCMSTB SoC Example: spi@f03e3400 { #address-cells = <0x1>; #size-cells = <0x0>; - compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-qspi"; + compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi"; reg = <0xf03e0920 0x4 0xf03e3400 0x188 0xf03e3200 0x50>; reg-names = "cs_reg", "mspi", "bspi"; interrupts = <0x6 0x5 0x4 0x3 0x2 0x1 0x0>; @@ -149,7 +151,7 @@ BRCMSTB SoC Example: #address-cells = <1>; #size-cells = <0>; clocks = <&upg_fixed>; - compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-mspi"; + compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi"; reg = <0xf0416000 0x180>; reg-names = "mspi"; interrupts = <0x14>; @@ -160,7 +162,7 @@ BRCMSTB SoC Example: iProc SoC Example: qspi: spi@18027200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; reg = <0x18027200 0x184>, <0x18027000 0x124>, <0x1811c408 0x004>, @@ -191,7 +193,7 @@ iProc SoC Example: NS2 SoC Example: qspi: spi@66470200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"; + compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi"; reg = <0x66470200 0x184>, <0x66470000 0x124>, <0x67017408 0x004>, diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml new file mode 100644 index 000000000000..55c239446a5b --- /dev/null +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-nor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Serial NOR flash controller for MediaTek ARM SoCs + +maintainers: + - Bayi Cheng <bayi.cheng@mediatek.com> + - Chuanhong Guo <gch981213@gmail.com> + +description: | + This spi controller support single, dual, or quad mode transfer for + SPI NOR flash. There should be only one spi slave device following + generic spi bindings. It's not recommended to use this controller + for devices other than SPI NOR flash due to limited transfer + capability of this controller. + +allOf: + - $ref: /spi/spi-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-nor + - mediatek,mt2712-nor + - mediatek,mt7622-nor + - mediatek,mt7623-nor + - mediatek,mt7629-nor + - mediatek,mt8192-nor + - enum: + - mediatek,mt8173-nor + - items: + - const: mediatek,mt8173-nor + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: clock used for spi bus + - description: clock used for controller + + clock-names: + items: + - const: spi + - const: sf + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + nor_flash: spi@1100d000 { + compatible = "mediatek,mt8173-nor"; + reg = <0 0x1100d000 0 0xe0>; + interrupts = <&spi_flash_irq>; + clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>; + clock-names = "spi", "sf"; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml index e0c55dd235d8..3fd0a8adfe9a 100644 --- a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml +++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml @@ -24,6 +24,8 @@ required: - compatible - reg +unevaluatedProperties: false + examples: - | spi: spi@1f000000 { diff --git a/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml index 2aa766759d59..7b19f2c1cb59 100644 --- a/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml +++ b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml @@ -29,6 +29,8 @@ required: - '#address-cells' - '#size-cells' +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/ath79-clk.h> diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index 0178831b0662..ef5698f426b2 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -56,6 +56,8 @@ required: - clock-names - clocks +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml index f492cb9fea12..c0eccf703039 100644 --- a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml @@ -40,6 +40,8 @@ required: - '#address-cells' - '#size-cells' +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/r8a7778-clock.h> diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml index c54ac059043f..10e83cb17e8d 100644 --- a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml @@ -25,6 +25,7 @@ properties: - items: - enum: + - renesas,qspi-r8a7742 # RZ/G1H - renesas,qspi-r8a7743 # RZ/G1M - renesas,qspi-r8a7744 # RZ/G1N - renesas,qspi-r8a7745 # RZ/G1E @@ -123,6 +124,8 @@ allOf: required: - resets +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/r8a7791-cpg-mssr.h> diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml index 9f7b118adcaf..44c7ddb4b109 100644 --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml @@ -41,6 +41,7 @@ properties: - renesas,msiof-r8a774e1 # RZ/G2H - renesas,msiof-r8a7795 # R-Car H3 - renesas,msiof-r8a7796 # R-Car M3-W + - renesas,msiof-r8a77961 # R-Car M3-W+ - renesas,msiof-r8a77965 # R-Car M3-N - renesas,msiof-r8a77970 # R-Car V3M - renesas,msiof-r8a77980 # R-Car V3H @@ -140,6 +141,8 @@ required: - '#address-cells' - '#size-cells' +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/r8a7791-clock.h> diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index c62cbe79f00d..99ed9b416e94 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -22,6 +22,21 @@ allOf: properties: reg: minItems: 2 + - if: + properties: + compatible: + contains: + enum: + - baikal,bt1-sys-ssi + then: + properties: + mux-controls: + maxItems: 1 + required: + - mux-controls + else: + required: + - interrupts properties: compatible: @@ -36,6 +51,8 @@ properties: - mscc,ocelot-spi - mscc,jaguar2-spi - const: snps,dw-apb-ssi + - description: Microchip Sparx5 SoC SPI Controller + const: microchip,sparx5-spi - description: Amazon Alpine SPI Controller const: amazon,alpine-dw-apb-ssi - description: Renesas RZ/N1 SPI Controller @@ -44,12 +61,16 @@ properties: - const: snps,dw-apb-ssi - description: Intel Keem Bay SPI Controller const: intel,keembay-ssi + - description: Baikal-T1 SPI Controller + const: baikal,bt1-ssi + - description: Baikal-T1 System Boot SPI Controller + const: baikal,bt1-sys-ssi reg: minItems: 1 items: - description: DW APB SSI controller memory mapped registers - - description: SPI MST region map + - description: SPI MST region map or directly mapped SPI ROM interrupts: maxItems: 1 @@ -93,6 +114,12 @@ properties: - const: tx - const: rx + rx-sample-delay-ns: + default: 0 + description: Default value of the rx-sample-delay-ns property. + This value will be used if the property is not explicitly defined + for a SPI slave device. See below. + patternProperties: "^.*@[0-9a-f]+$": type: object @@ -107,6 +134,13 @@ patternProperties: spi-tx-bus-width: const: 1 + rx-sample-delay-ns: + description: SPI Rx sample delay offset, unit is nanoseconds. + The delay from the default sample time before the actual + sample of the rxd input signal occurs. The "rx_sample_delay" + is an optional feature of the designware controller, and the + upper limit is also subject to controller configuration. + unevaluatedProperties: false required: @@ -114,7 +148,6 @@ required: - reg - "#address-cells" - "#size-cells" - - interrupts - clocks examples: @@ -129,5 +162,22 @@ examples: num-cs = <2>; cs-gpios = <&gpio0 13 0>, <&gpio0 14 0>; + rx-sample-delay-ns = <3>; + spi-flash@1 { + compatible = "spi-nand"; + reg = <1>; + rx-sample-delay-ns = <7>; + }; + }; + - | + spi@1f040100 { + compatible = "baikal,bt1-sys-ssi"; + reg = <0x1f040100 0x900>, + <0x1c000000 0x1000000>; + #address-cells = <1>; + #size-cells = <0>; + mux-controls = <&boot_mux>; + clocks = <&ccu_sys>; + clock-names = "ssi_clk"; }; ... diff --git a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml index c25409298bdf..597fc4e6b01c 100644 --- a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml +++ b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml @@ -44,6 +44,8 @@ required: - "#address-cells" - "#size-cells" +unevaluatedProperties: false + examples: - | spi0: spi@54006000 { diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index c6a2f543648b..1b56d5e40f1f 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -20,7 +20,7 @@ properties: pattern: "^spi(@.*|-[0-9a-f])*$" "#address-cells": - const: 1 + enum: [0, 1] "#size-cells": const: 0 @@ -52,11 +52,19 @@ properties: description: The SPI controller acts as a slave, instead of a master. -oneOf: - - required: - - "#address-cells" - - required: - - spi-slave +allOf: + - if: + not: + required: + - spi-slave + then: + properties: + "#address-cells": + const: 1 + else: + properties: + "#address-cells": + const: 0 patternProperties: "^slave$": @@ -140,6 +148,8 @@ patternProperties: - compatible - reg +additionalProperties: true + examples: - | spi@f00 { diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.yaml b/Documentation/devicetree/bindings/spi/spi-gpio.yaml index 55c4f1705f07..0d0b6d9dad1c 100644 --- a/Documentation/devicetree/bindings/spi/spi-gpio.yaml +++ b/Documentation/devicetree/bindings/spi/spi-gpio.yaml @@ -53,6 +53,8 @@ required: - num-chipselects - sck-gpios +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt deleted file mode 100644 index 984ae7fd4f94..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Serial NOR flash controller for MediaTek ARM SoCs - -Required properties: -- compatible: For mt8173, compatible should be "mediatek,mt8173-nor", - and it's the fallback compatible for other Soc. - For every other SoC, should contain both the SoC-specific compatible - string and "mediatek,mt8173-nor". - The possible values are: - "mediatek,mt2701-nor", "mediatek,mt8173-nor" - "mediatek,mt2712-nor", "mediatek,mt8173-nor" - "mediatek,mt7622-nor", "mediatek,mt8173-nor" - "mediatek,mt7623-nor", "mediatek,mt8173-nor" - "mediatek,mt7629-nor", "mediatek,mt8173-nor" - "mediatek,mt8173-nor" -- reg: physical base address and length of the controller's register -- interrupts: Interrupt number used by the controller. -- clocks: the phandle of the clocks needed by the nor controller -- clock-names: the names of the clocks - the clocks should be named "spi" and "sf". "spi" is used for spi bus, - and "sf" is used for controller, these are the clocks witch - hardware needs to enabling nor flash and nor flash controller. - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- #address-cells: should be <1> -- #size-cells: should be <0> - -There should be only one spi slave device following generic spi bindings. -It's not recommended to use this controller for devices other than SPI NOR -flash due to limited transfer capability of this controller. - -Example: - -nor_flash: spi@1100d000 { - compatible = "mediatek,mt8173-nor"; - reg = <0 0x1100d000 0 0xe0>; - interrupts = <&spi_flash_irq>; - clocks = <&pericfg CLK_PERI_SPI>, - <&topckgen CLK_TOP_SPINFI_IFR_SEL>; - clock-names = "spi", "sf"; - #address-cells = <1>; - #size-cells = <0>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - }; -}; - diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml index 3d3fed63409b..6c21a132b51f 100644 --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -48,6 +48,8 @@ required: - spi-max-frequency - mux-controls +unevaluatedProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index 22999024477f..a91d868e40c5 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -128,6 +128,8 @@ required: - reg - interrupts +unevaluatedProperties: false + examples: - | spi@e0100000 { diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml index 74dc6185eced..1e6cf29e6388 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -85,6 +85,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/rk3188-cru-common.h> diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml index 4932205d1cba..56dcf1d35da4 100644 --- a/Documentation/devicetree/bindings/spi/spi-sifive.yaml +++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml @@ -66,6 +66,8 @@ required: - interrupts - clocks +unevaluatedProperties: false + examples: - | spi: spi@10040000 { diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml index 1a342ce1f798..983c4e54c0be 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml @@ -53,6 +53,8 @@ required: - clocks - interrupts +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index e49ecbf715ba..d11806b1ede3 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -76,6 +76,8 @@ required: - clocks - interrupts +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt index e16b9b5afc70..ca645e21fe47 100644 --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt @@ -7,8 +7,8 @@ devices to control a single SPMI master. The PMIC Arbiter can also act as an interrupt controller, providing interrupts to slave devices. -See spmi.txt for the generic SPMI controller binding requirements for child -nodes. +See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI +controller binding requirements for child nodes. See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for generic interrupt controller binding documentation. diff --git a/Documentation/devicetree/bindings/spmi/spmi.txt b/Documentation/devicetree/bindings/spmi/spmi.txt deleted file mode 100644 index 4bb10d161a27..000000000000 --- a/Documentation/devicetree/bindings/spmi/spmi.txt +++ /dev/null @@ -1,41 +0,0 @@ -System Power Management Interface (SPMI) Controller - -This document defines a generic set of bindings for use by SPMI controllers. A -controller is modelled in device tree as a node with zero or more child nodes, -each representing a unique slave on the bus. - -Required properties: -- #address-cells : must be set to 2 -- #size-cells : must be set to 0 - -Child nodes: - -An SPMI controller node can contain zero or more child nodes representing slave -devices on the bus. Child 'reg' properties are specified as an address, type -pair. The address must be in the range 0-15 (4 bits). The type must be one of -SPMI_USID (0) or SPMI_GSID (1) for Unique Slave ID or Group Slave ID respectively. -These are the identifiers "statically assigned by the system integrator", as -per the SPMI spec. - -Each child node must have one and only one 'reg' entry of type SPMI_USID. - -#include <dt-bindings/spmi/spmi.h> - - spmi@.. { - compatible = "..."; - reg = <...>; - - #address-cells = <2>; - #size-cells = <0>; - - child@0 { - compatible = "..."; - reg = <0 SPMI_USID>; - }; - - child@7 { - compatible = "..."; - reg = <7 SPMI_USID - 3 SPMI_GSID>; - }; - }; diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml new file mode 100644 index 000000000000..173940930719 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/spmi.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/spmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System Power Management Interface (SPMI) Controller + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + +description: | + The System Power Management (SPMI) controller is a 2-wire bus defined + by the MIPI Alliance for power management control to be used on SoC designs. + + SPMI controllers are modelled in device tree using a generic set of + bindings defined here, plus any bus controller specific properties, if + needed. + + Each SPMI controller has zero or more child nodes (up to 16 ones), each + one representing an unique slave at the bus. + +properties: + $nodename: + pattern: "^spmi@.*" + + reg: + maxItems: 1 + + "#address-cells": + const: 2 + + "#size-cells": + const: 0 + +patternProperties: + "@[0-9a-f]$": + description: up to 16 child PMIC nodes + type: object + + properties: + reg: + minItems: 1 + maxItems: 2 + items: + - minimum: 0 + maximum: 0xf + - enum: [ 0 ] + description: | + 0 means user ID address. 1 is reserved for group ID address. + + required: + - reg + +required: + - reg + +additionalProperties: true + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + spmi@0 { + reg = <0 0>; + + #address-cells = <2>; + #size-cells = <0>; + + child@0 { + reg = <0 SPMI_USID>; + }; + + child@7 { + reg = <7 SPMI_USID>; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml index 44ba6765697d..31edd051295a 100644 --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -17,6 +17,7 @@ properties: - allwinner,sun8i-h3-ths - allwinner,sun8i-r40-ths - allwinner,sun50i-a64-ths + - allwinner,sun50i-a100-ths - allwinner,sun50i-h5-ths - allwinner,sun50i-h6-ths @@ -61,7 +62,9 @@ allOf: properties: compatible: contains: - const: allwinner,sun50i-h6-ths + enum: + - allwinner,sun50i-a100-ths + - allwinner,sun50i-h6-ths then: properties: @@ -103,6 +106,7 @@ allOf: - const: allwinner,sun8i-h3-ths - const: allwinner,sun8i-r40-ths - const: allwinner,sun50i-a64-ths + - const: allwinner,sun50i-a100-ths - const: allwinner,sun50i-h5-ths - const: allwinner,sun50i-h6-ths diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml index 38852877b8e3..89c54e08ee61 100644 --- a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml @@ -18,9 +18,13 @@ description: | properties: compatible: - enum: - - fsl,imx8mm-tmu - - fsl,imx8mp-tmu + oneOf: + - enum: + - fsl,imx8mm-tmu + - fsl,imx8mp-tmu + - items: + - const: fsl,imx8mn-tmu + - const: fsl,imx8mm-tmu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index b1a55ae497de..f386f2a7c06c 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -20,6 +20,7 @@ properties: enum: - renesas,r8a774a1-thermal # RZ/G2M - renesas,r8a774b1-thermal # RZ/G2N + - renesas,r8a774e1-thermal # RZ/G2H - renesas,r8a7795-thermal # R-Car H3 - renesas,r8a7796-thermal # R-Car M3-W - renesas,r8a77961-thermal # R-Car M3-W+ diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml index 0994693d240f..7e9557ac0e4a 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml @@ -59,6 +59,9 @@ properties: resets: maxItems: 1 + "#thermal-sensor-cells": + const: 0 + if: properties: compatible: @@ -79,6 +82,8 @@ else: - power-domains - resets +additionalProperties: false + examples: # Example (non interrupt support) - | diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml index af2ff930646a..6d65a3cf2af2 100644 --- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml @@ -68,6 +68,8 @@ patternProperties: - nvmem-cells - nvmem-cell-names + additionalProperties: false + required: - compatible - reg @@ -79,6 +81,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + examples: - | ap_thm0: thermal@32200000 { diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml index ad4beaf02842..f004779ba9b3 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml @@ -49,6 +49,8 @@ properties: and the second cell is the maximum cooling state requested. const: 2 +additionalProperties: true + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml index a832d427e9d5..6278ccf16f3f 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml @@ -44,6 +44,8 @@ properties: required: - '#cooling-cells' +additionalProperties: false + examples: - | #include <dt-bindings/thermal/thermal.h> diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml index 727d04550324..9f747921e851 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml @@ -36,6 +36,8 @@ properties: containing several internal sensors. enum: [0, 1] +additionalProperties: true + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 3ec9cc87ec50..164f71598c59 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -218,6 +218,8 @@ patternProperties: - trips additionalProperties: false +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.txt b/Documentation/devicetree/bindings/timer/arm,sp804.txt deleted file mode 100644 index 5cd8eee74af1..000000000000 --- a/Documentation/devicetree/bindings/timer/arm,sp804.txt +++ /dev/null @@ -1,29 +0,0 @@ -ARM sp804 Dual Timers ---------------------------------------- - -Required properties: -- compatible: Should be "arm,sp804" & "arm,primecell" -- interrupts: Should contain the list of Dual Timer interrupts. This is the - interrupt for timer 1 and timer 2. In the case of a single entry, it is - the combined interrupt or if "arm,sp804-has-irq" is present that - specifies which timer interrupt is connected. -- reg: Should contain location and length for dual timer register. -- clocks: clocks driving the dual timer hardware. This list should be 1 or 3 - clocks. With 3 clocks, the order is timer0 clock, timer1 clock, - apb_pclk. A single clock can also be specified if the same clock is - used for all clock inputs. - -Optional properties: -- arm,sp804-has-irq = <#>: In the case of only 1 timer irq line connected, this - specifies if the irq connection is for timer 1 or timer 2. A value of 1 - or 2 should be used. - -Example: - - timer0: timer@fc800000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0xfc800000 0x1000>; - interrupts = <0 0 4>, <0 1 4>; - clocks = <&timclk1 &timclk2 &pclk>; - clock-names = "timer1", "timer2", "apb_pclk"; - }; diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml new file mode 100644 index 000000000000..e35d3053250a --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,sp804.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM sp804 Dual Timers + +maintainers: + - Haojian Zhuang <haojian.zhuang@linaro.org> + +description: |+ + The Arm SP804 IP implements two independent timers, configurable for + 16 or 32 bit operation and capable of running in one-shot, periodic, or + free-running mode. The input clock is shared, but can be gated and prescaled + independently for each timer. + + There is a viriant of Arm SP804: Hisilicon 64-bit SP804 timer. Some Hisilicon + SoCs, such as Hi1212, should use the dedicated compatible: "hisilicon,sp804". + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + oneOf: + - const: arm,sp804 + - const: hisilicon,sp804 + required: + - compatible + +properties: + compatible: + items: + - enum: + - arm,sp804 + - hisilicon,sp804 + - const: arm,primecell + + interrupts: + description: | + If two interrupts are listed, those are the interrupts for timer + 1 and 2, respectively. If there is only a single interrupt, it is + either a combined interrupt or the sole interrupt of one timer, as + specified by the "arm,sp804-has-irq" property. + minItems: 1 + maxItems: 2 + + reg: + description: The physical base address of the SP804 IP. + maxItems: 1 + + clocks: + description: | + Clocks driving the dual timer hardware. This list should + be 1 or 3 clocks. With 3 clocks, the order is timer0 clock, timer1 + clock, apb_pclk. A single clock can also be specified if the same + clock is used for all clock inputs. + oneOf: + - items: + - description: clock for timer 1 + - description: clock for timer 2 + - description: bus clock + - items: + - description: unified clock for both timers and the bus + + clock-names: true + # The original binding did not specify any clock names, and there is no + # consistent naming used in the existing DTs. The primecell binding + # requires the "apb_pclk" name, so we need this property. + # Use "timer0clk", "timer1clk", "apb_pclk" for new DTs. + + arm,sp804-has-irq: + description: If only one interrupt line is connected to the interrupt + controller, this property specifies which timer is connected to this + line. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 2 + +required: + - compatible + - interrupts + - reg + - clocks + +additionalProperties: false + +examples: + - | + timer0: timer@fc800000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfc800000 0x1000>; + interrupts = <0 0 4>, <0 1 4>; + clocks = <&timclk1>, <&timclk2>, <&pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml index c532b60b9c63..8615353f69b4 100644 --- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml +++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml @@ -36,6 +36,8 @@ required: - interrupts - clocks +additionalProperties: false + examples: - | ttc0: ttc0@f8001000 { diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index 0d256486f886..690a9c0966ac 100644 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -22,6 +22,7 @@ Required properties: For those SoCs that use SYST * "mediatek,mt8183-timer" for MT8183 compatible timers (SYST) + * "mediatek,mt8192-timer" for MT8192 compatible timers (SYST) * "mediatek,mt7629-timer" for MT7629 compatible timers (SYST) * "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST) diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml index 7e4dc5623da8..428db3a21bb9 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml @@ -39,6 +39,7 @@ properties: - items: - enum: - renesas,r8a73a4-cmt0 # 32-bit CMT0 on R-Mobile APE6 + - renesas,r8a7742-cmt0 # 32-bit CMT0 on RZ/G1H - renesas,r8a7743-cmt0 # 32-bit CMT0 on RZ/G1M - renesas,r8a7744-cmt0 # 32-bit CMT0 on RZ/G1N - renesas,r8a7745-cmt0 # 32-bit CMT0 on RZ/G1E @@ -53,6 +54,7 @@ properties: - items: - enum: - renesas,r8a73a4-cmt1 # 48-bit CMT1 on R-Mobile APE6 + - renesas,r8a7742-cmt1 # 48-bit CMT1 on RZ/G1H - renesas,r8a7743-cmt1 # 48-bit CMT1 on RZ/G1M - renesas,r8a7744-cmt1 # 48-bit CMT1 on RZ/G1N - renesas,r8a7745-cmt1 # 48-bit CMT1 on RZ/G1E @@ -69,6 +71,7 @@ properties: - renesas,r8a774a1-cmt0 # 32-bit CMT0 on RZ/G2M - renesas,r8a774b1-cmt0 # 32-bit CMT0 on RZ/G2N - renesas,r8a774c0-cmt0 # 32-bit CMT0 on RZ/G2E + - renesas,r8a774e1-cmt0 # 32-bit CMT0 on RZ/G2H - renesas,r8a7795-cmt0 # 32-bit CMT0 on R-Car H3 - renesas,r8a7796-cmt0 # 32-bit CMT0 on R-Car M3-W - renesas,r8a77965-cmt0 # 32-bit CMT0 on R-Car M3-N @@ -83,6 +86,7 @@ properties: - renesas,r8a774a1-cmt1 # 48-bit CMT on RZ/G2M - renesas,r8a774b1-cmt1 # 48-bit CMT on RZ/G2N - renesas,r8a774c0-cmt1 # 48-bit CMT on RZ/G2E + - renesas,r8a774e1-cmt1 # 48-bit CMT on RZ/G2H - renesas,r8a7795-cmt1 # 48-bit CMT on R-Car H3 - renesas,r8a7796-cmt1 # 48-bit CMT on R-Car M3-W - renesas,r8a77965-cmt1 # 48-bit CMT on R-Car M3-N diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml index 37bd01a62c52..f11cbc7ccc14 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml @@ -23,6 +23,15 @@ properties: - samsung,exynos4210-mct - samsung,exynos4412-mct + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - pattern: "^(fin_pll|mct)$" + - pattern: "^(fin_pll|mct)$" + reg: maxItems: 1 @@ -49,6 +58,8 @@ properties: required: - compatible + - clock-names + - clocks - interrupts - reg @@ -59,11 +70,15 @@ examples: // In this example, the IP contains two local timers, using separate // interrupts, so two local timer interrupts have been specified, // in addition to four global timer interrupts. + #include <dt-bindings/clock/exynos4.h> #include <dt-bindings/interrupt-controller/arm-gic.h> timer@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, @@ -75,11 +90,15 @@ examples: - | // In this example, the timer interrupts are connected to two separate // interrupt controllers. Hence, an interrupts-extended is needed. + #include <dt-bindings/clock/exynos4.h> #include <dt-bindings/interrupt-controller/arm-gic.h> timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <&combiner 12 6>, @@ -92,11 +111,14 @@ examples: // In this example, the IP contains four local timers, but using // a per-processor interrupt to handle them. Only one first local // interrupt is specified. + #include <dt-bindings/clock/exynos4.h> #include <dt-bindings/interrupt-controller/arm-gic.h> timer@10050000 { compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, @@ -109,11 +131,14 @@ examples: // In this example, the IP contains four local timers, but using // a per-processor interrupt to handle them. All the local timer // interrupts are specified. + #include <dt-bindings/clock/exynos4.h> #include <dt-bindings/interrupt-controller/arm-gic.h> timer@10050000 { compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml index 7b39e3204fb3..2fc617377e2c 100644 --- a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml +++ b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml @@ -45,7 +45,7 @@ properties: frequency in HZ, but is defined only for the backwards compatibility with the picoxcell platform. -unevaluatedProperties: false +additionalProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 4ace8039840a..ab623ba930d5 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -54,6 +54,8 @@ properties: - dallas,ds1682 # Tiny Digital Thermometer and Thermostat - dallas,ds1775 + # CPU Peripheral Monitor + - dallas,ds1780 # CPU Supervisor with Nonvolatile Memory and Programmable I/O - dallas,ds4510 # Digital Thermometer and Thermostat @@ -80,6 +82,8 @@ properties: - fsl,mpl3115 # MPR121: Proximity Capacitive Touch Sensor Controller - fsl,mpr121 + # Monolithic Power Systems Inc. multi-phase controller mp2975 + - mps,mp2975 # G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface - gmt,g751 # Infineon IR38064 Voltage Regulator @@ -128,6 +132,22 @@ properties: - mcube,mc3230 # MEMSIC 2-axis 8-bit digital accelerometer - memsic,mxc6225 + # Microchip differential I2C ADC, 1 Channel, 18 bit + - microchip,mcp3421 + # Microchip differential I2C ADC, 2 Channel, 18 bit + - microchip,mcp3422 + # Microchip differential I2C ADC, 2 Channel, 18 bit + - microchip,mcp3423 + # Microchip differential I2C ADC, 4 Channel, 18 bit + - microchip,mcp3424 + # Microchip differential I2C ADC, 1 Channel, 16 bit + - microchip,mcp3425 + # Microchip differential I2C ADC, 2 Channel, 16 bit + - microchip,mcp3426 + # Microchip differential I2C ADC, 2 Channel, 16 bit + - microchip,mcp3427 + # Microchip differential I2C ADC, 4 Channel, 16 bit + - microchip,mcp3428 # Microchip 7-bit Single I2C Digital POT (5k) - microchip,mcp4017-502 # Microchip 7-bit Single I2C Digital POT (10k) @@ -296,6 +316,8 @@ properties: - national,lm75 # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor - national,lm80 + # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor + - national,lm81 # Temperature sensor with integrated fan control - national,lm85 # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator @@ -306,10 +328,6 @@ properties: - nuvoton,npct601 # Nuvoton Temperature Sensor - nuvoton,w83773g - # Octal SMBus and I2C registered interface - - nxp,pca9556 - # 8-bit I2C-bus and SMBus I/O port with reset - - nxp,pca9557 # OKI ML86V7667 video decoder - oki,ml86v7667 # OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus @@ -326,6 +344,8 @@ properties: - silabs,si7020 # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply - skyworks,sky81452 + # Socionext SynQuacer TPM MMIO module + - socionext,synquacer-tpm-mmio # i2c serial eeprom (24cxx) - st,24c256 # Ambient Light Sensor with SMBUS/Two Wire Serial Interface diff --git a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt index 72aab8547308..63a953b672d2 100644 --- a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt +++ b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt @@ -9,7 +9,9 @@ contain a phandle reference to UFS M-PHY node. Required properties for UFS nodes: - compatible : Compatible list, contains the following controller: "mediatek,mt8183-ufshci" for MediaTek UFS host controller - present on MT81xx chipsets. + present on MT8183 chipsets. + "mediatek,mt8192-ufshci" for MediaTek UFS host controller + present on MT8192 chipsets. - reg : Address and length of the UFS register set. - phys : phandle to m-phy. - clocks : List of phandle and clock specifier pairs. diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index 5b04a7dfa018..c0058332b967 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -25,13 +25,14 @@ description: | The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in host-only mode. - The Amlogic GXL & GXM SoCs doesn't embed an USB3 PHY. + The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY. properties: compatible: enum: - amlogic,meson-gxl-usb-ctrl - amlogic,meson-gxm-usb-ctrl + - amlogic,meson-axg-usb-ctrl - amlogic,meson-g12a-usb-ctrl - amlogic,meson-a1-usb-ctrl @@ -155,6 +156,25 @@ allOf: properties: compatible: enum: + - amlogic,meson-axg-usb-ctrl + + then: + properties: + phy-names: + items: + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used + clocks: + minItems: 2 + clock-names: + items: + - const: usb_ctrl + - const: ddr + required: + - clock-names + - if: + properties: + compatible: + enum: - amlogic,meson-a1-usb-ctrl then: diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 423b99a8fd97..a4002624ba14 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -82,6 +82,7 @@ Required properties: "atmel,at91sam9rl-udc" "atmel,at91sam9g45-udc" "atmel,sama5d3-udc" + "microchip,sam9x60-udc" - reg: Address and length of the register set for the device - interrupts: Should contain usba interrupt - clocks: Should reference the peripheral and host clocks diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml new file mode 100644 index 000000000000..ac20b98e9910 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/cdns,usb3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence USBSS-DRD controller bindings + +maintainers: + - Pawel Laszczak <pawell@cadence.com> + +properties: + compatible: + const: cdns,usb3 + + reg: + items: + - description: OTG controller registers + - description: XHCI Host controller registers + - description: DEVICE controller registers + + reg-names: + items: + - const: otg + - const: xhci + - const: dev + + interrupts: + items: + - description: OTG/DRD controller interrupt + - description: XHCI host controller interrupt + - description: Device controller interrupt + + interrupt-names: + items: + - const: host + - const: peripheral + - const: otg + + dr_mode: + enum: [host, otg, peripheral] + + maximum-speed: + enum: [super-speed, high-speed, full-speed] + + phys: + minItems: 1 + maxItems: 2 + + phy-names: + minItems: 1 + maxItems: 2 + items: + anyOf: + - const: cdns3,usb2-phy + - const: cdns3,usb3-phy + + cdns,on-chip-buff-size: + description: + size of memory intended as internal memory for endpoints + buffers expressed in KB + $ref: /schemas/types.yaml#/definitions/uint32 + + cdns,phyrst-a-enable: + description: Enable resetting of PHY if Rx fail is detected + type: boolean + +required: + - compatible + - reg + - reg-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6000000 0x00 0x10000>, + <0x00 0x6010000 0x00 0x10000>, + <0x00 0x6020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt deleted file mode 100644 index b7dc606d37b5..000000000000 --- a/Documentation/devicetree/bindings/usb/cdns-usb3.txt +++ /dev/null @@ -1,45 +0,0 @@ -Binding for the Cadence USBSS-DRD controller - -Required properties: - - reg: Physical base address and size of the controller's register areas. - Controller has 3 different regions: - - HOST registers area - - DEVICE registers area - - OTG/DRD registers area - - reg-names - register memory area names: - "xhci" - for HOST registers space - "dev" - for DEVICE registers space - "otg" - for OTG/DRD registers space - - compatible: Should contain: "cdns,usb3" - - interrupts: Interrupts used by cdns3 controller: - "host" - interrupt used by XHCI driver. - "peripheral" - interrupt used by device driver - "otg" - interrupt used by DRD/OTG part of driver - -Optional properties: - - maximum-speed : valid arguments are "super-speed", "high-speed" and - "full-speed"; refer to usb/generic.txt - - dr_mode: Should be one of "host", "peripheral" or "otg". - - phys: reference to the USB PHY - - phy-names: from the *Generic PHY* bindings; - Supported names are: - - cdns3,usb2-phy - - cdns3,usb3-phy - - - cdns,on-chip-buff-size : size of memory intended as internal memory for endpoints - buffers expressed in KB - -Example: - usb@f3000000 { - compatible = "cdns,usb3"; - interrupts = <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_USB_IRQ 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host", "peripheral", "otg"; - reg = <0xf3000000 0x10000>, /* memory area for HOST registers */ - <0xf3010000 0x10000>, /* memory area for DEVICE registers */ - <0xf3020000 0x10000>; /* memory area for OTG/DRD registers */ - reg-names = "xhci", "dev", "otg"; - phys = <&usb2_phy>, <&usb3_phy>; - phy-names = "cdns3,usb2-phy", "cnds3,usb3-phy"; - }; diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 51376cbe5f3d..a5c5db6a0b2d 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -100,6 +100,15 @@ i.mx specific properties It's recommended to specify the over current polarity. - power-active-high: power signal polarity is active high - external-vbus-divider: enables off-chip resistor divider for Vbus +- samsung,picophy-pre-emp-curr-control: HS Transmitter Pre-Emphasis Current + Control. This signal controls the amount of current sourced to the + USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition. + The range is from 0x0 to 0x3, the default value is 0x1. + Details can refer to TXPREEMPAMPTUNE0 bits of USBNC_n_PHY_CFG1. +- samsung,picophy-dc-vol-level-adjust: HS DC Voltage Level Adjustment. + Adjust the high-speed transmitter DC level voltage. + The range is from 0x0 to 0xf, the default value is 0x3. + Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1. Example: diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index ffa157a0fce7..e5ee51b7b470 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -39,6 +39,7 @@ properties: - amlogic,meson-g12a-usb - const: snps,dwc2 - const: amcc,dwc-otg + - const: apm,apm82181-dwc-otg - const: snps,dwc2 - const: st,stm32f4x9-fsotg - const: st,stm32f4x9-hsotg @@ -102,6 +103,10 @@ properties: dr_mode: enum: [host, peripheral, otg] + usb-role-switch: + $ref: /schemas/types.yaml#/definitions/flag + description: Support role switch. + g-rx-fifo-size: $ref: /schemas/types.yaml#/definitions/uint32 description: size of rx fifo size in gadget mode. diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index d03edf9d3935..1aae2b6160c1 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -78,6 +78,9 @@ Optional properties: park mode are disabled. - snps,dis_metastability_quirk: when set, disable metastability workaround. CAUTION: use only if you are absolutely sure of it. + - snps,dis-split-quirk: when set, change the way URBs are handled by the + driver. Needed to avoid -EPROTO errors with usbhid + on some devices (Hikey 970). - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal utmi_l1_suspend_n, false when asserts utmi_sleep_n - snps,hird-threshold: HIRD threshold diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml new file mode 100644 index 000000000000..dd32c10ce6c7 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/intel,keembay-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay DWC3 USB controller + +maintainers: + - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> + +properties: + compatible: + const: intel,keembay-dwc3 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: async_master + - const: ref + - const: alt_ref + - const: suspend + + ranges: true + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + +# Required child node: + +patternProperties: + "^dwc3@[0-9a-f]+$": + type: object + description: + A child node must exist to represent the core DWC3 IP block. + The content of the node is defined in dwc3.txt. + +required: + - compatible + - clocks + - clock-names + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #define KEEM_BAY_A53_AUX_USB + #define KEEM_BAY_A53_AUX_USB_REF + #define KEEM_BAY_A53_AUX_USB_ALT_REF + #define KEEM_BAY_A53_AUX_USB_SUSPEND + + usb { + compatible = "intel,keembay-dwc3"; + clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>; + clock-names = "async_master", "ref", "alt_ref", "suspend"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + dwc3@34000000 { + compatible = "snps,dwc3"; + reg = <0x34000000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "peripheral"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml new file mode 100644 index 000000000000..1e8e1c22180e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller DT bindings + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + Mediatek MT6360 is a multi-functional device. It integrates charger, ADC, flash, RGB indicators, + regulators (BUCKs/LDOs), and TypeC Port Switch with Power Delivery controller. + This document only describes MT6360 Type-C Port Switch and Power Delivery controller. + +properties: + compatible: + enum: + - mediatek,mt6360-tcpc + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: PD_IRQB + + connector: + type: object + $ref: ../connector/usb-connector.yaml# + description: + Properties for usb c connector. + +additionalProperties: false + +required: + - compatible + - interrupts + - interrupt-names + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/usb/pd.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + mt6360@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + tcpc { + compatible = "mediatek,mt6360-tcpc"; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "PD_IRQB"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index 196589c93373..e60e590dbe12 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -155,6 +155,8 @@ allOf: clock-names: maxItems: 4 +additionalProperties: false + examples: - | #include <dt-bindings/clock/tegra210-car.h> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index dac10848dd7f..2cf525d21e05 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -121,6 +121,8 @@ required: - interrupts - interrupt-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> diff --git a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml index add9f7b66da0..0f078bd0a3e5 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml @@ -30,6 +30,7 @@ properties: - renesas,xhci-r8a774a1 # RZ/G2M - renesas,xhci-r8a774b1 # RZ/G2N - renesas,xhci-r8a774c0 # RZ/G2E + - renesas,xhci-r8a774e1 # RZ/G2H - renesas,xhci-r8a7795 # R-Car H3 - renesas,xhci-r8a7796 # R-Car M3-W - renesas,xhci-r8a77961 # R-Car M3-W+ diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index e3cdeab1199f..929a3f413b44 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -16,6 +16,7 @@ properties: - renesas,r8a774a1-usb3-peri # RZ/G2M - renesas,r8a774b1-usb3-peri # RZ/G2N - renesas,r8a774c0-usb3-peri # RZ/G2E + - renesas,r8a774e1-usb3-peri # RZ/G2H - renesas,r8a7795-usb3-peri # R-Car H3 - renesas,r8a7796-usb3-peri # R-Car M3-W - renesas,r8a77961-usb3-peri # R-Car M3-W+ @@ -52,11 +53,24 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: phandle of a companion. - port: + ports: description: | any connector to the data bus of this controller should be modelled using the OF graph bindings specified, if the "usb-role-switch" property is used. + type: object + properties: + port@0: + type: object + description: High Speed (HS) data bus. + + port@1: + type: object + description: Super Speed (SS) data bus. + + required: + - port@0 + - port@1 required: - compatible @@ -79,9 +93,20 @@ examples: companion = <&xhci0>; usb-role-switch; - port { - usb3_role_switch: endpoint { - remote-endpoint = <&hd3ss3220_ep>; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index af4826fb6824..737c1f47b7de 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -39,6 +39,7 @@ properties: - renesas,usbhs-r8a774a1 # RZ/G2M - renesas,usbhs-r8a774b1 # RZ/G2N - renesas,usbhs-r8a774c0 # RZ/G2E + - renesas,usbhs-r8a774e1 # RZ/G2H - renesas,usbhs-r8a7795 # R-Car H3 - renesas,usbhs-r8a7796 # R-Car M3-W - renesas,usbhs-r8a77961 # R-Car M3-W+ diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt deleted file mode 100644 index 2bd21b22ce95..000000000000 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt +++ /dev/null @@ -1,38 +0,0 @@ -TI HD3SS3220 TypeC DRP Port Controller. - -Required properties: - - compatible: Must be "ti,hd3ss3220". - - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin. - - interrupts: An interrupt specifier. - -Required sub-node: - - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The - bindings of the connector node are specified in: - - Documentation/devicetree/bindings/connector/usb-connector.yaml - -Example: -hd3ss3220@47 { - compatible = "ti,hd3ss3220"; - reg = <0x47>; - interrupt-parent = <&gpio6>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - hd3ss3220_ep: endpoint { - remote-endpoint = <&usb3_role_switch>; - }; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml new file mode 100644 index 000000000000..5fe9e6211ba2 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,hd3ss3220.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI HD3SS3220 TypeC DRP Port Controller + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: |- + HD3SS3220 is a USB SuperSpeed (SS) 2:1 mux with DRP port controller. The device provides Channel + Configuration (CC) logic and 5V VCONN sourcing for ecosystems implementing USB Type-C. The + HD3SS3220 can be configured as a Downstream Facing Port (DFP), Upstream Facing Port (UFP) or a + Dual Role Port (DRP) making it ideal for any application. + +properties: + compatible: + const: ti,hd3ss3220 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + description: OF graph bindings (specified in bindings/graph.txt) that model + SS data bus to the SS capable connector. + type: object + properties: + port@0: + type: object + description: Super Speed (SS) MUX inputs connected to SS capable connector. + $ref: /connector/usb-connector.yaml#/properties/ports/properties/port@1 + + port@1: + type: object + description: Output of 2:1 MUX connected to Super Speed (SS) data bus. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; + }; + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index 484fc1091d7c..388245b91a55 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -46,6 +46,22 @@ properties: VBUS pin of the SoC via a 1/3 voltage divider. type: boolean + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + +patternProperties: + "^usb@": + type: object + required: - compatible - reg @@ -53,6 +69,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/soc/ti,sci_pm_domain.h> diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml index 8eaf4b6c4735..f6819bf2a3b5 100644 --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml @@ -32,6 +32,8 @@ required: - interrupts - interrupt-names +additionalProperties: true + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 7263b7f2b510..b545b087b342 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -22,6 +22,8 @@ properties: description: Name specifier for the USB PHY +additionalProperties: true + examples: - | usb { diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 63996ab03521..07bdfdd7b31c 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -197,6 +197,8 @@ patternProperties: description: Ceva, Inc. "^checkpoint,.*": description: Check Point Software Technologies Ltd. + "^chefree,.*": + description: Chefree Technology Corp. "^chipidea,.*": description: Chipidea, Inc "^chipone,.*": @@ -263,6 +265,8 @@ patternProperties: description: Denx Software Engineering "^devantech,.*": description: Devantech, Ltd. + "^dfi,.*": + description: DFI Inc. "^dh,.*": description: DH electronics GmbH "^difrnce,.*": @@ -423,6 +427,8 @@ patternProperties: description: Gumstix, Inc. "^gw,.*": description: Gateworks Corporation + use "gateworks" vendor prefix + deprecated: true "^hannstar,.*": description: HannStar Display Corporation "^haoyu,.*": @@ -601,6 +607,8 @@ patternProperties: description: Logic Technologies Limited "^longcheer,.*": description: Longcheer Technology (Shanghai) Co., Ltd. + "^lontium,.*": + description: Lontium Semiconductor Corporation "^loongson,.*": description: Loongson Technology Corporation Limited "^lsi,.*": @@ -611,6 +619,8 @@ patternProperties: description: Linux Automation GmbH "^macnica,.*": description: Macnica Americas + "^mantix,.*": + description: Mantix Display Technology Co.,Ltd. "^mapleboard,.*": description: Mapleboard.org "^marvell,.*": @@ -643,6 +653,8 @@ patternProperties: description: MEMSIC Inc. "^menlo,.*": description: Menlo Systems GmbH + "^meraki,.*": + description: Cisco Meraki, LLC "^merrii,.*": description: Merrii Technology Co., Ltd. "^micrel,.*": @@ -830,6 +842,8 @@ patternProperties: description: Poslab Technology Co., Ltd. "^pov,.*": description: Point of View International B.V. + "^powertip,.*": + description: Powertip Tech. Corp. "^powervr,.*": description: PowerVR (deprecated, use img) "^primux,.*": @@ -874,6 +888,8 @@ patternProperties: description: Realtek Semiconductor Corp. "^renesas,.*": description: Renesas Electronics Corporation + "^rex,.*": + description: iMX6 Rex Project "^rervision,.*": description: Shenzhen Rervision Technology Co., Ltd. "^richtek,.*": @@ -884,6 +900,8 @@ patternProperties: description: Rikomagic Tech Corp. Ltd "^riscv,.*": description: RISC-V Foundation + "^riot,.*": + description: Embest RIoT "^rockchip,.*": description: Fuzhou Rockchip Electronics Co., Ltd "^rocktech,.*": @@ -1136,6 +1154,8 @@ patternProperties: description: Vision Optical Technology Co., Ltd. "^vxt,.*": description: VXT Ltd + "^wand,.*": + description: Wandbord (Technexion) "^waveshare,.*": description: Waveshare Electronics "^wd,.*": @@ -1174,6 +1194,8 @@ patternProperties: description: Shenzhen Xingbangda Display Technology Co., Ltd "^xinpeng,.*": description: Shenzhen Xinpeng Technology Co., Ltd + "^xiphera,.*": + description: Xiphera Ltd. "^xlnx,.*": description: Xilinx "^xnano,.*": @@ -1190,6 +1212,8 @@ patternProperties: description: Yones Toptech Co., Ltd. "^ysoft,.*": description: Y Soft Corporation a.s. + "^zealz,.*": + description: Zealz "^zarlink,.*": description: Zarlink Semiconductor "^zeitec,.*": @@ -1198,6 +1222,8 @@ patternProperties: description: Shenzhen Zidoo Technology Co., Ltd. "^zii,.*": description: Zodiac Inflight Innovations + "^zinitix,.*": + description: Zinitix Co., Ltd "^zte,.*": description: ZTE Corp. "^zyxel,.*": diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt b/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt deleted file mode 100644 index cbaa6467ab2c..000000000000 --- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Freescale i.MX One wire bus master controller - -Required properties: -- compatible : should be "fsl,imx21-owire" -- reg : Address and length of the register set for the device - -Optional properties: -- clocks : phandle of clock that supplies the module (required if platform - clock bindings use device tree) - -Example: - -- From imx53.dtsi: -owire: owire@63fa4000 { - compatible = "fsl,imx53-owire", "fsl,imx21-owire"; - reg = <0x63fa4000 0x4000>; - clocks = <&clks 159>; -}; diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml new file mode 100644 index 000000000000..1aaf3e768c81 --- /dev/null +++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/w1/fsl-imx-owire.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX One wire bus master controller + +maintainers: + - Martin Fuzzey <mfuzzey@parkeon.com> + +properties: + compatible: + oneOf: + - const: fsl,imx21-owire + - items: + - enum: + - fsl,imx27-owire + - fsl,imx50-owire + - fsl,imx51-owire + - fsl,imx53-owire + - const: fsl,imx21-owire + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + + owire@63fa4000 { + compatible = "fsl,imx53-owire", "fsl,imx21-owire"; + reg = <0x63fa4000 0x4000>; + clocks = <&clks IMX5_CLK_OWIRE_GATE>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml index 4ddae6feef3b..c7459cf70e30 100644 --- a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml @@ -31,6 +31,8 @@ required: - reg - clocks +unevaluatedProperties: false + examples: - | watchdog@98d0 { diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt b/Documentation/devicetree/bindings/watchdog/arm,sp805.txt deleted file mode 100644 index bee6f1f0e41b..000000000000 --- a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt +++ /dev/null @@ -1,32 +0,0 @@ -ARM AMBA Primecell SP805 Watchdog - -SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that -can be used to identify the peripheral type, vendor, and revision. -This value can be used for driver matching. - -As SP805 WDT is a primecell IP, it follows the base bindings specified in -'arm/primecell.txt' - -Required properties: -- compatible: Should be "arm,sp805" & "arm,primecell" -- reg: Should contain location and length for watchdog timer register -- clocks: Clocks driving the watchdog timer hardware. This list should be - 2 clocks. With 2 clocks, the order is wdog_clk, apb_pclk - wdog_clk can be equal to or be a sub-multiple of the apb_pclk - frequency -- clock-names: Shall be "wdog_clk" for first clock and "apb_pclk" for the - second one - -Optional properties: -- interrupts: Should specify WDT interrupt number -- timeout-sec: Should specify default WDT timeout in seconds. If unset, the - default timeout is determined by the driver - -Example: - watchdog@66090000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x66090000 0x1000>; - interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&wdt_clk>, <&apb_pclk>; - clock-names = "wdog_clk", "apb_pclk"; - }; diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml new file mode 100644 index 000000000000..a69cac8ec208 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/arm,sp805.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM AMBA Primecell SP805 Watchdog + +maintainers: + - Viresh Kumar <vireshk@kernel.org> + +description: |+ + The Arm SP805 IP implements a watchdog device, which triggers an interrupt + after a configurable time period. If that interrupt has not been serviced + when the next interrupt would be triggered, the reset signal is asserted. + +allOf: + - $ref: /schemas/watchdog/watchdog.yaml# + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,sp805 + required: + - compatible + +properties: + compatible: + items: + - const: arm,sp805 + - const: arm,primecell + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + clocks: + description: | + Clocks driving the watchdog timer hardware. The first clock is used + for the actual watchdog counter. The second clock drives the register + interface. + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: wdog_clk + - const: apb_pclk + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + watchdog@66090000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x66090000 0x1000>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wdt_clk>, <&apb_pclk>; + clock-names = "wdog_clk", "apb_pclk"; + }; diff --git a/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml index 8e4c7c69bc1c..e3a1d79574e2 100644 --- a/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml @@ -25,6 +25,8 @@ properties: required: - compatible +unevaluatedProperties: false + examples: - | watchdog { diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt index d78d4a8fb868..a8197632d6d2 100644 --- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt @@ -20,7 +20,7 @@ Optional properties: This is useful in situations where another watchdog engine on chip is to perform the reset. - If 'aspeed,reset-type=' is not specfied the default is to enable system + If 'aspeed,reset-type=' is not specified the default is to enable system reset. Reset types: diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml index d96b93b11fad..991b4e33486e 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml @@ -14,8 +14,15 @@ allOf: properties: compatible: - enum: - - fsl,imx21-wdt + oneOf: + - const: fsl,imx21-wdt + - items: + - enum: + - fsl,imx8mm-wdt + - fsl,imx8mn-wdt + - fsl,imx8mp-wdt + - fsl,imx8mq-wdt + - const: fsl,imx21-wdt reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml new file mode 100644 index 000000000000..179272f74de5 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/kontron,sl28cpld-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Watchdog driver for the sl28cpld board management controller + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: kontron,sl28cpld-wdt + + reg: + maxItems: 1 + + kontron,assert-wdt-timeout-pin: + description: The SMARC standard defines a WDT_TIME_OUT# pin. If this + property is set, this output will be pulsed when the watchdog bites + and the system resets. + type: boolean + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index 0709ddf0b6a5..8e3760a3822b 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -38,6 +38,8 @@ required: - reg - clocks +unevaluatedProperties: false + examples: - | watchdog@208a038 { diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml index 2fa40d8864b2..76cb9586ee00 100644 --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml @@ -62,6 +62,8 @@ allOf: required: - samsung,syscon-phandle +unevaluatedProperties: false + examples: - | watchdog@101d0000 { diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml index a27c504e2e4f..3f1ba1d6c6b5 100644 --- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml +++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml @@ -43,6 +43,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/clock/stm32mp1-clks.h> diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml index f0452791c598..c1348db59374 100644 --- a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml @@ -46,6 +46,8 @@ required: - clocks - power-domains +unevaluatedProperties: false + examples: - | /* diff --git a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml new file mode 100644 index 000000000000..690e19ce4b87 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 Toshiba Electronic Devices & Storage Corporation +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/watchdog/toshiba,visconti-wdt.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Toshiba Visconti SoCs PIUWDT Watchdog timer + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - toshiba,visconti-wdt + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + timeout-sec: true + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + wdt_clk: wdt-clk { + compatible = "fixed-clock"; + clock-frequency = <150000000>; + #clock-cells = <0>; + }; + + watchdog@28330000 { + compatible = "toshiba,visconti-wdt"; + reg = <0 0x28330000 0 0x1000>; + clocks = <&wdt_clk>; + timeout-sec = <20>; + }; + }; diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml index 187bf6cb62bf..4e2c26cd981d 100644 --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml @@ -23,4 +23,6 @@ properties: description: Contains the watchdog timeout in seconds. +additionalProperties: true + ... diff --git a/Documentation/devicetree/booting-without-of.rst b/Documentation/devicetree/booting-without-of.rst deleted file mode 100644 index e9433350a20f..000000000000 --- a/Documentation/devicetree/booting-without-of.rst +++ /dev/null @@ -1,1585 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -================================================== -Booting the Linux/ppc kernel without Open Firmware -================================================== - -Copyright (c) 2005 Benjamin Herrenschmidt <benh at kernel.crashing.org>, -IBM Corp. - -Copyright (c) 2005 Becky Bruce <becky.bruce at freescale.com>, -Freescale Semiconductor, FSL SOC and 32-bit additions - -Copyright (c) 2006 MontaVista Software, Inc. -Flash chip node definition - -.. Table of Contents - - I - Introduction - 1) Entry point for arch/arm - 2) Entry point for arch/powerpc - 3) Entry point for arch/x86 - 4) Entry point for arch/mips/bmips - 5) Entry point for arch/sh - - II - The DT block format - 1) Header - 2) Device tree generalities - 3) Device tree "structure" block - 4) Device tree "strings" block - - III - Required content of the device tree - 1) Note about cells and address representation - 2) Note about "compatible" properties - 3) Note about "name" properties - 4) Note about node and property names and character set - 5) Required nodes and properties - a) The root node - b) The /cpus node - c) The /cpus/* nodes - d) the /memory node(s) - e) The /chosen node - f) the /soc<SOCname> node - - IV - "dtc", the device tree compiler - - V - Recommendations for a bootloader - - VI - System-on-a-chip devices and nodes - 1) Defining child nodes of an SOC - 2) Representing devices without a current OF specification - - VII - Specifying interrupt information for devices - 1) interrupts property - 2) interrupt-parent property - 3) OpenPIC Interrupt Controllers - 4) ISA Interrupt Controllers - - VIII - Specifying device power management information (sleep property) - - IX - Specifying dma bus information - - Appendix A - Sample SOC node for MPC8540 - - -Revision Information -==================== - - May 18, 2005: Rev 0.1 - - Initial draft, no chapter III yet. - - May 19, 2005: Rev 0.2 - - Add chapter III and bits & pieces here or - clarifies the fact that a lot of things are - optional, the kernel only requires a very - small device tree, though it is encouraged - to provide an as complete one as possible. - - May 24, 2005: Rev 0.3 - - Precise that DT block has to be in RAM - - Misc fixes - - Define version 3 and new format version 16 - for the DT block (version 16 needs kernel - patches, will be fwd separately). - String block now has a size, and full path - is replaced by unit name for more - compactness. - linux,phandle is made optional, only nodes - that are referenced by other nodes need it. - "name" property is now automatically - deduced from the unit name - - June 1, 2005: Rev 0.4 - - Correct confusion between OF_DT_END and - OF_DT_END_NODE in structure definition. - - Change version 16 format to always align - property data to 4 bytes. Since tokens are - already aligned, that means no specific - required alignment between property size - and property data. The old style variable - alignment would make it impossible to do - "simple" insertion of properties using - memmove (thanks Milton for - noticing). Updated kernel patch as well - - Correct a few more alignment constraints - - Add a chapter about the device-tree - compiler and the textural representation of - the tree that can be "compiled" by dtc. - - November 21, 2005: Rev 0.5 - - Additions/generalizations for 32-bit - - Changed to reflect the new arch/powerpc - structure - - Added chapter VI - - - ToDo: - - Add some definitions of interrupt tree (simple/complex) - - Add some definitions for PCI host bridges - - Add some common address format examples - - Add definitions for standard properties and "compatible" - names for cells that are not already defined by the existing - OF spec. - - Compare FSL SOC use of PCI to standard and make sure no new - node definition required. - - Add more information about node definitions for SOC devices - that currently have no standard, like the FSL CPM. - - -I - Introduction -================ - -During the development of the Linux/ppc64 kernel, and more -specifically, the addition of new platform types outside of the old -IBM pSeries/iSeries pair, it was decided to enforce some strict rules -regarding the kernel entry and bootloader <-> kernel interfaces, in -order to avoid the degeneration that had become the ppc32 kernel entry -point and the way a new platform should be added to the kernel. The -legacy iSeries platform breaks those rules as it predates this scheme, -but no new board support will be accepted in the main tree that -doesn't follow them properly. In addition, since the advent of the -arch/powerpc merged architecture for ppc32 and ppc64, new 32-bit -platforms and 32-bit platforms which move into arch/powerpc will be -required to use these rules as well. - -The main requirement that will be defined in more detail below is -the presence of a device-tree whose format is defined after Open -Firmware specification. However, in order to make life easier -to embedded board vendors, the kernel doesn't require the device-tree -to represent every device in the system and only requires some nodes -and properties to be present. This will be described in detail in -section III, but, for example, the kernel does not require you to -create a node for every PCI device in the system. It is a requirement -to have a node for PCI host bridges in order to provide interrupt -routing information and memory/IO ranges, among others. It is also -recommended to define nodes for on chip devices and other buses that -don't specifically fit in an existing OF specification. This creates a -great flexibility in the way the kernel can then probe those and match -drivers to device, without having to hard code all sorts of tables. It -also makes it more flexible for board vendors to do minor hardware -upgrades without significantly impacting the kernel code or cluttering -it with special cases. - - -1) Entry point for arch/arm ---------------------------- - - There is one single entry point to the kernel, at the start - of the kernel image. That entry point supports two calling - conventions. A summary of the interface is described here. A full - description of the boot requirements is documented in - Documentation/arm/booting.rst - - a) ATAGS interface. Minimal information is passed from firmware - to the kernel with a tagged list of predefined parameters. - - r0 : 0 - - r1 : Machine type number - - r2 : Physical address of tagged list in system RAM - - b) Entry with a flattened device-tree block. Firmware loads the - physical address of the flattened device tree block (dtb) into r2, - r1 is not used, but it is considered good practice to use a valid - machine number as described in Documentation/arm/booting.rst. - - r0 : 0 - - r1 : Valid machine type number. When using a device tree, - a single machine type number will often be assigned to - represent a class or family of SoCs. - - r2 : physical pointer to the device-tree block - (defined in chapter II) in RAM. Device tree can be located - anywhere in system RAM, but it should be aligned on a 64 bit - boundary. - - The kernel will differentiate between ATAGS and device tree booting by - reading the memory pointed to by r2 and looking for either the flattened - device tree block magic value (0xd00dfeed) or the ATAG_CORE value at - offset 0x4 from r2 (0x54410001). - -2) Entry point for arch/powerpc -------------------------------- - - There is one single entry point to the kernel, at the start - of the kernel image. That entry point supports two calling - conventions: - - a) Boot from Open Firmware. If your firmware is compatible - with Open Firmware (IEEE 1275) or provides an OF compatible - client interface API (support for "interpret" callback of - forth words isn't required), you can enter the kernel with: - - r5 : OF callback pointer as defined by IEEE 1275 - bindings to powerpc. Only the 32-bit client interface - is currently supported - - r3, r4 : address & length of an initrd if any or 0 - - The MMU is either on or off; the kernel will run the - trampoline located in arch/powerpc/kernel/prom_init.c to - extract the device-tree and other information from open - firmware and build a flattened device-tree as described - in b). prom_init() will then re-enter the kernel using - the second method. This trampoline code runs in the - context of the firmware, which is supposed to handle all - exceptions during that time. - - b) Direct entry with a flattened device-tree block. This entry - point is called by a) after the OF trampoline and can also be - called directly by a bootloader that does not support the Open - Firmware client interface. It is also used by "kexec" to - implement "hot" booting of a new kernel from a previous - running one. This method is what I will describe in more - details in this document, as method a) is simply standard Open - Firmware, and thus should be implemented according to the - various standard documents defining it and its binding to the - PowerPC platform. The entry point definition then becomes: - - r3 : physical pointer to the device-tree block - (defined in chapter II) in RAM - - r4 : physical pointer to the kernel itself. This is - used by the assembly code to properly disable the MMU - in case you are entering the kernel with MMU enabled - and a non-1:1 mapping. - - r5 : NULL (as to differentiate with method a) - - Note about SMP entry: Either your firmware puts your other - CPUs in some sleep loop or spin loop in ROM where you can get - them out via a soft reset or some other means, in which case - you don't need to care, or you'll have to enter the kernel - with all CPUs. The way to do that with method b) will be - described in a later revision of this document. - - Board supports (platforms) are not exclusive config options. An - arbitrary set of board supports can be built in a single kernel - image. The kernel will "know" what set of functions to use for a - given platform based on the content of the device-tree. Thus, you - should: - - a) add your platform support as a _boolean_ option in - arch/powerpc/Kconfig, following the example of PPC_PSERIES, - PPC_PMAC and PPC_MAPLE. The later is probably a good - example of a board support to start from. - - b) create your main platform file as - "arch/powerpc/platforms/myplatform/myboard_setup.c" and add it - to the Makefile under the condition of your ``CONFIG_`` - option. This file will define a structure of type "ppc_md" - containing the various callbacks that the generic code will - use to get to your platform specific code - - A kernel image may support multiple platforms, but only if the - platforms feature the same core architecture. A single kernel build - cannot support both configurations with Book E and configurations - with classic Powerpc architectures. - -3) Entry point for arch/x86 ---------------------------- - - There is one single 32bit entry point to the kernel at code32_start, - the decompressor (the real mode entry point goes to the same 32bit - entry point once it switched into protected mode). That entry point - supports one calling convention which is documented in - Documentation/x86/boot.rst - The physical pointer to the device-tree block (defined in chapter II) - is passed via setup_data which requires at least boot protocol 2.09. - The type filed is defined as:: - - #define SETUP_DTB 2 - - This device-tree is used as an extension to the "boot page". As such it - does not parse / consider data which is already covered by the boot - page. This includes memory size, reserved ranges, command line arguments - or initrd address. It simply holds information which can not be retrieved - otherwise like interrupt routing or a list of devices behind an I2C bus. - -4) Entry point for arch/mips/bmips ----------------------------------- - - Some bootloaders only support a single entry point, at the start of the - kernel image. Other bootloaders will jump to the ELF start address. - Both schemes are supported; CONFIG_BOOT_RAW=y and CONFIG_NO_EXCEPT_FILL=y, - so the first instruction immediately jumps to kernel_entry(). - - Similar to the arch/arm case (b), a DT-aware bootloader is expected to - set up the following registers: - - a0 : 0 - - a1 : 0xffffffff - - a2 : Physical pointer to the device tree block (defined in chapter - II) in RAM. The device tree can be located anywhere in the first - 512MB of the physical address space (0x00000000 - 0x1fffffff), - aligned on a 64 bit boundary. - - Legacy bootloaders do not use this convention, and they do not pass in a - DT block. In this case, Linux will look for a builtin DTB, selected via - CONFIG_DT_*. - - This convention is defined for 32-bit systems only, as there are not - currently any 64-bit BMIPS implementations. - -5) Entry point for arch/sh --------------------------- - - Device-tree-compatible SH bootloaders are expected to provide the physical - address of the device tree blob in r4. Since legacy bootloaders did not - guarantee any particular initial register state, kernels built to - inter-operate with old bootloaders must either use a builtin DTB or - select a legacy board option (something other than CONFIG_SH_DEVICE_TREE) - that does not use device tree. Support for the latter is being phased out - in favor of device tree. - - -II - The DT block format -======================== - - -This chapter defines the actual format of the flattened device-tree -passed to the kernel. The actual content of it and kernel requirements -are described later. You can find example of code manipulating that -format in various places, including arch/powerpc/kernel/prom_init.c -which will generate a flattened device-tree from the Open Firmware -representation, or the fs2dt utility which is part of the kexec tools -which will generate one from a filesystem representation. It is -expected that a bootloader like uboot provides a bit more support, -that will be discussed later as well. - -Note: The block has to be in main memory. It has to be accessible in -both real mode and virtual mode with no mapping other than main -memory. If you are writing a simple flash bootloader, it should copy -the block to RAM before passing it to the kernel. - - -1) Header ---------- - - The kernel is passed the physical address pointing to an area of memory - that is roughly described in include/linux/of_fdt.h by the structure - boot_param_header::: - - struct boot_param_header { - u32 magic; /* magic word OF_DT_HEADER */ - u32 totalsize; /* total size of DT block */ - u32 off_dt_struct; /* offset to structure */ - u32 off_dt_strings; /* offset to strings */ - u32 off_mem_rsvmap; /* offset to memory reserve map - */ - u32 version; /* format version */ - u32 last_comp_version; /* last compatible version */ - - /* version 2 fields below */ - u32 boot_cpuid_phys; /* Which physical CPU id we're - booting on */ - /* version 3 fields below */ - u32 size_dt_strings; /* size of the strings block */ - - /* version 17 fields below */ - u32 size_dt_struct; /* size of the DT structure block */ - }; - - Along with the constants:: - - /* Definitions used by the flattened device tree */ - #define OF_DT_HEADER 0xd00dfeed /* 4: version, - 4: total size */ - #define OF_DT_BEGIN_NODE 0x1 /* Start node: full name - */ - #define OF_DT_END_NODE 0x2 /* End node */ - #define OF_DT_PROP 0x3 /* Property: name off, - size, content */ - #define OF_DT_END 0x9 - - All values in this header are in big endian format, the various - fields in this header are defined more precisely below. All - "offset" values are in bytes from the start of the header; that is - from the physical base address of the device tree block. - - - magic - - This is a magic value that "marks" the beginning of the - device-tree block header. It contains the value 0xd00dfeed and is - defined by the constant OF_DT_HEADER - - - totalsize - - This is the total size of the DT block including the header. The - "DT" block should enclose all data structures defined in this - chapter (who are pointed to by offsets in this header). That is, - the device-tree structure, strings, and the memory reserve map. - - - off_dt_struct - - This is an offset from the beginning of the header to the start - of the "structure" part the device tree. (see 2) device tree) - - - off_dt_strings - - This is an offset from the beginning of the header to the start - of the "strings" part of the device-tree - - - off_mem_rsvmap - - This is an offset from the beginning of the header to the start - of the reserved memory map. This map is a list of pairs of 64- - bit integers. Each pair is a physical address and a size. The - list is terminated by an entry of size 0. This map provides the - kernel with a list of physical memory areas that are "reserved" - and thus not to be used for memory allocations, especially during - early initialization. The kernel needs to allocate memory during - boot for things like un-flattening the device-tree, allocating an - MMU hash table, etc... Those allocations must be done in such a - way to avoid overriding critical things like, on Open Firmware - capable machines, the RTAS instance, or on some pSeries, the TCE - tables used for the iommu. Typically, the reserve map should - contain **at least** this DT block itself (header,total_size). If - you are passing an initrd to the kernel, you should reserve it as - well. You do not need to reserve the kernel image itself. The map - should be 64-bit aligned. - - - version - - This is the version of this structure. Version 1 stops - here. Version 2 adds an additional field boot_cpuid_phys. - Version 3 adds the size of the strings block, allowing the kernel - to reallocate it easily at boot and free up the unused flattened - structure after expansion. Version 16 introduces a new more - "compact" format for the tree itself that is however not backward - compatible. Version 17 adds an additional field, size_dt_struct, - allowing it to be reallocated or moved more easily (this is - particularly useful for bootloaders which need to make - adjustments to a device tree based on probed information). You - should always generate a structure of the highest version defined - at the time of your implementation. Currently that is version 17, - unless you explicitly aim at being backward compatible. - - - last_comp_version - - Last compatible version. This indicates down to what version of - the DT block you are backward compatible. For example, version 2 - is backward compatible with version 1 (that is, a kernel build - for version 1 will be able to boot with a version 2 format). You - should put a 1 in this field if you generate a device tree of - version 1 to 3, or 16 if you generate a tree of version 16 or 17 - using the new unit name format. - - - boot_cpuid_phys - - This field only exist on version 2 headers. It indicate which - physical CPU ID is calling the kernel entry point. This is used, - among others, by kexec. If you are on an SMP system, this value - should match the content of the "reg" property of the CPU node in - the device-tree corresponding to the CPU calling the kernel entry - point (see further chapters for more information on the required - device-tree contents) - - - size_dt_strings - - This field only exists on version 3 and later headers. It - gives the size of the "strings" section of the device tree (which - starts at the offset given by off_dt_strings). - - - size_dt_struct - - This field only exists on version 17 and later headers. It gives - the size of the "structure" section of the device tree (which - starts at the offset given by off_dt_struct). - - So the typical layout of a DT block (though the various parts don't - need to be in that order) looks like this (addresses go from top to - bottom):: - - - ------------------------------ - base -> | struct boot_param_header | - ------------------------------ - | (alignment gap) (*) | - ------------------------------ - | memory reserve map | - ------------------------------ - | (alignment gap) | - ------------------------------ - | | - | device-tree structure | - | | - ------------------------------ - | (alignment gap) | - ------------------------------ - | | - | device-tree strings | - | | - -----> ------------------------------ - | - | - --- (base + totalsize) - - (*) The alignment gaps are not necessarily present; their presence - and size are dependent on the various alignment requirements of - the individual data blocks. - - -2) Device tree generalities ---------------------------- - -This device-tree itself is separated in two different blocks, a -structure block and a strings block. Both need to be aligned to a 4 -byte boundary. - -First, let's quickly describe the device-tree concept before detailing -the storage format. This chapter does _not_ describe the detail of the -required types of nodes & properties for the kernel, this is done -later in chapter III. - -The device-tree layout is strongly inherited from the definition of -the Open Firmware IEEE 1275 device-tree. It's basically a tree of -nodes, each node having two or more named properties. A property can -have a value or not. - -It is a tree, so each node has one and only one parent except for the -root node who has no parent. - -A node has 2 names. The actual node name is generally contained in a -property of type "name" in the node property list whose value is a -zero terminated string and is mandatory for version 1 to 3 of the -format definition (as it is in Open Firmware). Version 16 makes it -optional as it can generate it from the unit name defined below. - -There is also a "unit name" that is used to differentiate nodes with -the same name at the same level, it is usually made of the node -names, the "@" sign, and a "unit address", which definition is -specific to the bus type the node sits on. - -The unit name doesn't exist as a property per-se but is included in -the device-tree structure. It is typically used to represent "path" in -the device-tree. More details about the actual format of these will be -below. - -The kernel generic code does not make any formal use of the -unit address (though some board support code may do) so the only real -requirement here for the unit address is to ensure uniqueness of -the node unit name at a given level of the tree. Nodes with no notion -of address and no possible sibling of the same name (like /memory or -/cpus) may omit the unit address in the context of this specification, -or use the "@0" default unit address. The unit name is used to define -a node "full path", which is the concatenation of all parent node -unit names separated with "/". - -The root node doesn't have a defined name, and isn't required to have -a name property either if you are using version 3 or earlier of the -format. It also has no unit address (no @ symbol followed by a unit -address). The root node unit name is thus an empty string. The full -path to the root node is "/". - -Every node which actually represents an actual device (that is, a node -which isn't only a virtual "container" for more nodes, like "/cpus" -is) is also required to have a "compatible" property indicating the -specific hardware and an optional list of devices it is fully -backwards compatible with. - -Finally, every node that can be referenced from a property in another -node is required to have either a "phandle" or a "linux,phandle" -property. Real Open Firmware implementations provide a unique -"phandle" value for every node that the "prom_init()" trampoline code -turns into "linux,phandle" properties. However, this is made optional -if the flattened device tree is used directly. An example of a node -referencing another node via "phandle" is when laying out the -interrupt tree which will be described in a further version of this -document. - -The "phandle" property is a 32-bit value that uniquely -identifies a node. You are free to use whatever values or system of -values, internal pointers, or whatever to generate these, the only -requirement is that every node for which you provide that property has -a unique value for it. - -Here is an example of a simple device-tree. In this example, an "o" -designates a node followed by the node unit name. Properties are -presented with their name followed by their content. "content" -represents an ASCII string (zero terminated) value, while <content> -represents a 32-bit value, specified in decimal or hexadecimal (the -latter prefixed 0x). The various nodes in this example will be -discussed in a later chapter. At this point, it is only meant to give -you a idea of what a device-tree looks like. I have purposefully kept -the "name" and "linux,phandle" properties which aren't necessary in -order to give you a better idea of what the tree looks like in -practice:: - - / o device-tree - |- name = "device-tree" - |- model = "MyBoardName" - |- compatible = "MyBoardFamilyName" - |- #address-cells = <2> - |- #size-cells = <2> - |- linux,phandle = <0> - | - o cpus - | | - name = "cpus" - | | - linux,phandle = <1> - | | - #address-cells = <1> - | | - #size-cells = <0> - | | - | o PowerPC,970@0 - | |- name = "PowerPC,970" - | |- device_type = "cpu" - | |- reg = <0> - | |- clock-frequency = <0x5f5e1000> - | |- 64-bit - | |- linux,phandle = <2> - | - o memory@0 - | |- name = "memory" - | |- device_type = "memory" - | |- reg = <0x00000000 0x00000000 0x00000000 0x20000000> - | |- linux,phandle = <3> - | - o chosen - |- name = "chosen" - |- bootargs = "root=/dev/sda2" - |- linux,phandle = <4> - -This tree is almost a minimal tree. It pretty much contains the -minimal set of required nodes and properties to boot a linux kernel; -that is, some basic model information at the root, the CPUs, and the -physical memory layout. It also includes misc information passed -through /chosen, like in this example, the platform type (mandatory) -and the kernel command line arguments (optional). - -The /cpus/PowerPC,970@0/64-bit property is an example of a -property without a value. All other properties have a value. The -significance of the #address-cells and #size-cells properties will be -explained in chapter IV which defines precisely the required nodes and -properties and their content. - - -3) Device tree "structure" block --------------------------------- - -The structure of the device tree is a linearized tree structure. The -"OF_DT_BEGIN_NODE" token starts a new node, and the "OF_DT_END_NODE" -ends that node definition. Child nodes are simply defined before -"OF_DT_END_NODE" (that is nodes within the node). A 'token' is a 32 -bit value. The tree has to be "finished" with a OF_DT_END token - -Here's the basic structure of a single node: - - * token OF_DT_BEGIN_NODE (that is 0x00000001) - * for version 1 to 3, this is the node full path as a zero - terminated string, starting with "/". For version 16 and later, - this is the node unit name only (or an empty string for the - root node) - * [align gap to next 4 bytes boundary] - * for each property: - - * token OF_DT_PROP (that is 0x00000003) - * 32-bit value of property value size in bytes (or 0 if no - value) - * 32-bit value of offset in string block of property name - * property value data if any - * [align gap to next 4 bytes boundary] - - * [child nodes if any] - * token OF_DT_END_NODE (that is 0x00000002) - -So the node content can be summarized as a start token, a full path, -a list of properties, a list of child nodes, and an end token. Every -child node is a full node structure itself as defined above. - -NOTE: The above definition requires that all property definitions for -a particular node MUST precede any subnode definitions for that node. -Although the structure would not be ambiguous if properties and -subnodes were intermingled, the kernel parser requires that the -properties come first (up until at least 2.6.22). Any tools -manipulating a flattened tree must take care to preserve this -constraint. - -4) Device tree "strings" block ------------------------------- - -In order to save space, property names, which are generally redundant, -are stored separately in the "strings" block. This block is simply the -whole bunch of zero terminated strings for all property names -concatenated together. The device-tree property definitions in the -structure block will contain offset values from the beginning of the -strings block. - - -III - Required content of the device tree -========================================= - -.. Warning:: - - All ``linux,*`` properties defined in this document apply only - to a flattened device-tree. If your platform uses a real - implementation of Open Firmware or an implementation compatible with - the Open Firmware client interface, those properties will be created - by the trampoline code in the kernel's prom_init() file. For example, - that's where you'll have to add code to detect your board model and - set the platform number. However, when using the flattened device-tree - entry point, there is no prom_init() pass, and thus you have to - provide those properties yourself. - - -1) Note about cells and address representation ----------------------------------------------- - -The general rule is documented in the various Open Firmware -documentations. If you choose to describe a bus with the device-tree -and there exist an OF bus binding, then you should follow the -specification. However, the kernel does not require every single -device or bus to be described by the device tree. - -In general, the format of an address for a device is defined by the -parent bus type, based on the #address-cells and #size-cells -properties. Note that the parent's parent definitions of #address-cells -and #size-cells are not inherited so every node with children must specify -them. The kernel requires the root node to have those properties defining -addresses format for devices directly mapped on the processor bus. - -Those 2 properties define 'cells' for representing an address and a -size. A "cell" is a 32-bit number. For example, if both contain 2 -like the example tree given above, then an address and a size are both -composed of 2 cells, and each is a 64-bit number (cells are -concatenated and expected to be in big endian format). Another example -is the way Apple firmware defines them, with 2 cells for an address -and one cell for a size. Most 32-bit implementations should define -#address-cells and #size-cells to 1, which represents a 32-bit value. -Some 32-bit processors allow for physical addresses greater than 32 -bits; these processors should define #address-cells as 2. - -"reg" properties are always a tuple of the type "address size" where -the number of cells of address and size is specified by the bus -#address-cells and #size-cells. When a bus supports various address -spaces and other flags relative to a given address allocation (like -prefetchable, etc...) those flags are usually added to the top level -bits of the physical address. For example, a PCI physical address is -made of 3 cells, the bottom two containing the actual address itself -while the top cell contains address space indication, flags, and pci -bus & device numbers. - -For buses that support dynamic allocation, it's the accepted practice -to then not provide the address in "reg" (keep it 0) though while -providing a flag indicating the address is dynamically allocated, and -then, to provide a separate "assigned-addresses" property that -contains the fully allocated addresses. See the PCI OF bindings for -details. - -In general, a simple bus with no address space bits and no dynamic -allocation is preferred if it reflects your hardware, as the existing -kernel address parsing functions will work out of the box. If you -define a bus type with a more complex address format, including things -like address space bits, you'll have to add a bus translator to the -prom_parse.c file of the recent kernels for your bus type. - -The "reg" property only defines addresses and sizes (if #size-cells is -non-0) within a given bus. In order to translate addresses upward -(that is into parent bus addresses, and possibly into CPU physical -addresses), all buses must contain a "ranges" property. If the -"ranges" property is missing at a given level, it's assumed that -translation isn't possible, i.e., the registers are not visible on the -parent bus. The format of the "ranges" property for a bus is a list -of:: - - bus address, parent bus address, size - -"bus address" is in the format of the bus this bus node is defining, -that is, for a PCI bridge, it would be a PCI address. Thus, (bus -address, size) defines a range of addresses for child devices. "parent -bus address" is in the format of the parent bus of this bus. For -example, for a PCI host controller, that would be a CPU address. For a -PCI<->ISA bridge, that would be a PCI address. It defines the base -address in the parent bus where the beginning of that range is mapped. - -For new 64-bit board support, I recommend either the 2/2 format or -Apple's 2/1 format which is slightly more compact since sizes usually -fit in a single 32-bit word. New 32-bit board support should use a -1/1 format, unless the processor supports physical addresses greater -than 32-bits, in which case a 2/1 format is recommended. - -Alternatively, the "ranges" property may be empty, indicating that the -registers are visible on the parent bus using an identity mapping -translation. In other words, the parent bus address space is the same -as the child bus address space. - -2) Note about "compatible" properties -------------------------------------- - -These properties are optional, but recommended in devices and the root -node. The format of a "compatible" property is a list of concatenated -zero terminated strings. They allow a device to express its -compatibility with a family of similar devices, in some cases, -allowing a single driver to match against several devices regardless -of their actual names. - -3) Note about "name" properties -------------------------------- - -While earlier users of Open Firmware like OldWorld macintoshes tended -to use the actual device name for the "name" property, it's nowadays -considered a good practice to use a name that is closer to the device -class (often equal to device_type). For example, nowadays, Ethernet -controllers are named "ethernet", an additional "model" property -defining precisely the chip type/model, and "compatible" property -defining the family in case a single driver can driver more than one -of these chips. However, the kernel doesn't generally put any -restriction on the "name" property; it is simply considered good -practice to follow the standard and its evolutions as closely as -possible. - -Note also that the new format version 16 makes the "name" property -optional. If it's absent for a node, then the node's unit name is then -used to reconstruct the name. That is, the part of the unit name -before the "@" sign is used (or the entire unit name if no "@" sign -is present). - -4) Note about node and property names and character set -------------------------------------------------------- - -While Open Firmware provides more flexible usage of 8859-1, this -specification enforces more strict rules. Nodes and properties should -be comprised only of ASCII characters 'a' to 'z', '0' to -'9', ',', '.', '_', '+', '#', '?', and '-'. Node names additionally -allow uppercase characters 'A' to 'Z' (property names should be -lowercase. The fact that vendors like Apple don't respect this rule is -irrelevant here). Additionally, node and property names should always -begin with a character in the range 'a' to 'z' (or 'A' to 'Z' for node -names). - -The maximum number of characters for both nodes and property names -is 31. In the case of node names, this is only the leftmost part of -a unit name (the pure "name" property), it doesn't include the unit -address which can extend beyond that limit. - - -5) Required nodes and properties --------------------------------- - These are all that are currently required. However, it is strongly - recommended that you expose PCI host bridges as documented in the - PCI binding to Open Firmware, and your interrupt tree as documented - in OF interrupt tree specification. - - a) The root node - - The root node requires some properties to be present: - - - model : this is your board name/model - - #address-cells : address representation for "root" devices - - #size-cells: the size representation for "root" devices - - compatible : the board "family" generally finds its way here, - for example, if you have 2 board models with a similar layout, - that typically get driven by the same platform code in the - kernel, you would specify the exact board model in the - compatible property followed by an entry that represents the SoC - model. - - The root node is also generally where you add additional properties - specific to your board like the serial number if any, that sort of - thing. It is recommended that if you add any "custom" property whose - name may clash with standard defined ones, you prefix them with your - vendor name and a comma. - - Additional properties for the root node: - - - serial-number : a string representing the device's serial number - - b) The /cpus node - - This node is the parent of all individual CPU nodes. It doesn't - have any specific requirements, though it's generally good practice - to have at least:: - - #address-cells = <00000001> - #size-cells = <00000000> - - This defines that the "address" for a CPU is a single cell, and has - no meaningful size. This is not necessary but the kernel will assume - that format when reading the "reg" properties of a CPU node, see - below - - c) The ``/cpus/*`` nodes - - So under /cpus, you are supposed to create a node for every CPU on - the machine. There is no specific restriction on the name of the - CPU, though it's common to call it <architecture>,<core>. For - example, Apple uses PowerPC,G5 while IBM uses PowerPC,970FX. - However, the Generic Names convention suggests that it would be - better to simply use 'cpu' for each cpu node and use the compatible - property to identify the specific cpu core. - - Required properties: - - - device_type : has to be "cpu" - - reg : This is the physical CPU number, it's a single 32-bit cell - and is also used as-is as the unit number for constructing the - unit name in the full path. For example, with 2 CPUs, you would - have the full path:: - - /cpus/PowerPC,970FX@0 - /cpus/PowerPC,970FX@1 - - (unit addresses do not require leading zeroes) - - d-cache-block-size : one cell, L1 data cache block size in bytes [#]_ - - i-cache-block-size : one cell, L1 instruction cache block size in - bytes - - d-cache-size : one cell, size of L1 data cache in bytes - - i-cache-size : one cell, size of L1 instruction cache in bytes - - .. [#] The cache "block" size is the size on which the cache management - instructions operate. Historically, this document used the cache - "line" size here which is incorrect. The kernel will prefer the cache - block size and will fallback to cache line size for backward - compatibility. - - Recommended properties: - - - timebase-frequency : a cell indicating the frequency of the - timebase in Hz. This is not directly used by the generic code, - but you are welcome to copy/paste the pSeries code for setting - the kernel timebase/decrementer calibration based on this - value. - - clock-frequency : a cell indicating the CPU core clock frequency - in Hz. A new property will be defined for 64-bit values, but if - your frequency is < 4Ghz, one cell is enough. Here as well as - for the above, the common code doesn't use that property, but - you are welcome to re-use the pSeries or Maple one. A future - kernel version might provide a common function for this. - - d-cache-line-size : one cell, L1 data cache line size in bytes - if different from the block size - - i-cache-line-size : one cell, L1 instruction cache line size in - bytes if different from the block size - - You are welcome to add any property you find relevant to your board, - like some information about the mechanism used to soft-reset the - CPUs. For example, Apple puts the GPIO number for CPU soft reset - lines in there as a "soft-reset" property since they start secondary - CPUs by soft-resetting them. - - - d) the /memory node(s) - - To define the physical memory layout of your board, you should - create one or more memory node(s). You can either create a single - node with all memory ranges in its reg property, or you can create - several nodes, as you wish. The unit address (@ part) used for the - full path is the address of the first range of memory defined by a - given node. If you use a single memory node, this will typically be - @0. - - Required properties: - - - device_type : has to be "memory" - - reg : This property contains all the physical memory ranges of - your board. It's a list of addresses/sizes concatenated - together, with the number of cells of each defined by the - #address-cells and #size-cells of the root node. For example, - with both of these properties being 2 like in the example given - earlier, a 970 based machine with 6Gb of RAM could typically - have a "reg" property here that looks like:: - - 00000000 00000000 00000000 80000000 - 00000001 00000000 00000001 00000000 - - That is a range starting at 0 of 0x80000000 bytes and a range - starting at 0x100000000 and of 0x100000000 bytes. You can see - that there is no memory covering the IO hole between 2Gb and - 4Gb. Some vendors prefer splitting those ranges into smaller - segments, but the kernel doesn't care. - - Additional properties: - - - hotpluggable : The presence of this property provides an explicit - hint to the operating system that this memory may potentially be - removed later. The kernel can take this into consideration when - doing nonmovable allocations and when laying out memory zones. - - e) The /chosen node - - This node is a bit "special". Normally, that's where Open Firmware - puts some variable environment information, like the arguments, or - the default input/output devices. - - This specification makes a few of these mandatory, but also defines - some linux-specific properties that would be normally constructed by - the prom_init() trampoline when booting with an OF client interface, - but that you have to provide yourself when using the flattened format. - - Recommended properties: - - - bootargs : This zero-terminated string is passed as the kernel - command line - - linux,stdout-path : This is the full path to your standard - console device if any. Typically, if you have serial devices on - your board, you may want to put the full path to the one set as - the default console in the firmware here, for the kernel to pick - it up as its own default console. - - Note that u-boot creates and fills in the chosen node for platforms - that use it. - - (Note: a practice that is now obsolete was to include a property - under /chosen called interrupt-controller which had a phandle value - that pointed to the main interrupt controller) - - f) the /soc<SOCname> node - - This node is used to represent a system-on-a-chip (SoC) and must be - present if the processor is a SoC. The top-level soc node contains - information that is global to all devices on the SoC. The node name - should contain a unit address for the SoC, which is the base address - of the memory-mapped register set for the SoC. The name of an SoC - node should start with "soc", and the remainder of the name should - represent the part number for the soc. For example, the MPC8540's - soc node would be called "soc8540". - - Required properties: - - - ranges : Should be defined as specified in 1) to describe the - translation of SoC addresses for memory mapped SoC registers. - - bus-frequency: Contains the bus frequency for the SoC node. - Typically, the value of this field is filled in by the boot - loader. - - compatible : Exact model of the SoC - - - Recommended properties: - - - reg : This property defines the address and size of the - memory-mapped registers that are used for the SOC node itself. - It does not include the child device registers - these will be - defined inside each child node. The address specified in the - "reg" property should match the unit address of the SOC node. - - #address-cells : Address representation for "soc" devices. The - format of this field may vary depending on whether or not the - device registers are memory mapped. For memory mapped - registers, this field represents the number of cells needed to - represent the address of the registers. For SOCs that do not - use MMIO, a special address format should be defined that - contains enough cells to represent the required information. - See 1) above for more details on defining #address-cells. - - #size-cells : Size representation for "soc" devices - - #interrupt-cells : Defines the width of cells used to represent - interrupts. Typically this value is <2>, which includes a - 32-bit number that represents the interrupt number, and a - 32-bit number that represents the interrupt sense and level. - This field is only needed if the SOC contains an interrupt - controller. - - The SOC node may contain child nodes for each SOC device that the - platform uses. Nodes should not be created for devices which exist - on the SOC but are not used by a particular platform. See chapter VI - for more information on how to specify devices that are part of a SOC. - - Example SOC node for the MPC8540:: - - soc8540@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <0x00000000 0xe0000000 0x00100000> - reg = <0xe0000000 0x00003000>; - bus-frequency = <0>; - } - - - -IV - "dtc", the device tree compiler -==================================== - - -dtc source code can be found at -<http://git.jdl.com/gitweb/?p=dtc.git> - -.. Warning:: - - This version is still in early development stage; the - resulting device-tree "blobs" have not yet been validated with the - kernel. The current generated block lacks a useful reserve map (it will - be fixed to generate an empty one, it's up to the bootloader to fill - it up) among others. The error handling needs work, bugs are lurking, - etc... - -dtc basically takes a device-tree in a given format and outputs a -device-tree in another format. The currently supported formats are: - -Input formats -------------- - - - "dtb": "blob" format, that is a flattened device-tree block - with - header all in a binary blob. - - "dts": "source" format. This is a text file containing a - "source" for a device-tree. The format is defined later in this - chapter. - - "fs" format. This is a representation equivalent to the - output of /proc/device-tree, that is nodes are directories and - properties are files - -Output formats --------------- - - - "dtb": "blob" format - - "dts": "source" format - - "asm": assembly language file. This is a file that can be - sourced by gas to generate a device-tree "blob". That file can - then simply be added to your Makefile. Additionally, the - assembly file exports some symbols that can be used. - - -The syntax of the dtc tool is:: - - dtc [-I <input-format>] [-O <output-format>] - [-o output-filename] [-V output_version] input_filename - - -The "output_version" defines what version of the "blob" format will be -generated. Supported versions are 1,2,3 and 16. The default is -currently version 3 but that may change in the future to version 16. - -Additionally, dtc performs various sanity checks on the tree, like the -uniqueness of linux, phandle properties, validity of strings, etc... - -The format of the .dts "source" file is "C" like, supports C and C++ -style comments:: - - / { - } - -The above is the "device-tree" definition. It's the only statement -supported currently at the toplevel. - -:: - - / { - property1 = "string_value"; /* define a property containing a 0 - * terminated string - */ - - property2 = <0x1234abcd>; /* define a property containing a - * numerical 32-bit value (hexadecimal) - */ - - property3 = <0x12345678 0x12345678 0xdeadbeef>; - /* define a property containing 3 - * numerical 32-bit values (cells) in - * hexadecimal - */ - property4 = [0x0a 0x0b 0x0c 0x0d 0xde 0xea 0xad 0xbe 0xef]; - /* define a property whose content is - * an arbitrary array of bytes - */ - - childnode@address { /* define a child node named "childnode" - * whose unit name is "childnode at - * address" - */ - - childprop = "hello\n"; /* define a property "childprop" of - * childnode (in this case, a string) - */ - }; - }; - -Nodes can contain other nodes etc... thus defining the hierarchical -structure of the tree. - -Strings support common escape sequences from C: "\n", "\t", "\r", -"\(octal value)", "\x(hex value)". - -It is also suggested that you pipe your source file through cpp (gcc -preprocessor) so you can use #include's, #define for constants, etc... - -Finally, various options are planned but not yet implemented, like -automatic generation of phandles, labels (exported to the asm file so -you can point to a property content and change it easily from whatever -you link the device-tree with), label or path instead of numeric value -in some cells to "point" to a node (replaced by a phandle at compile -time), export of reserve map address to the asm file, ability to -specify reserve map content at compile time, etc... - -We may provide a .h include file with common definitions of that -proves useful for some properties (like building PCI properties or -interrupt maps) though it may be better to add a notion of struct -definitions to the compiler... - - -V - Recommendations for a bootloader -==================================== - - -Here are some various ideas/recommendations that have been proposed -while all this has been defined and implemented. - - - The bootloader may want to be able to use the device-tree itself - and may want to manipulate it (to add/edit some properties, - like physical memory size or kernel arguments). At this point, 2 - choices can be made. Either the bootloader works directly on the - flattened format, or the bootloader has its own internal tree - representation with pointers (similar to the kernel one) and - re-flattens the tree when booting the kernel. The former is a bit - more difficult to edit/modify, the later requires probably a bit - more code to handle the tree structure. Note that the structure - format has been designed so it's relatively easy to "insert" - properties or nodes or delete them by just memmoving things - around. It contains no internal offsets or pointers for this - purpose. - - - An example of code for iterating nodes & retrieving properties - directly from the flattened tree format can be found in the kernel - file drivers/of/fdt.c. Look at the of_scan_flat_dt() function, - its usage in early_init_devtree(), and the corresponding various - early_init_dt_scan_*() callbacks. That code can be re-used in a - GPL bootloader, and as the author of that code, I would be happy - to discuss possible free licensing to any vendor who wishes to - integrate all or part of this code into a non-GPL bootloader. - (reference needed; who is 'I' here? ---gcl Jan 31, 2011) - - - -VI - System-on-a-chip devices and nodes -======================================= - -Many companies are now starting to develop system-on-a-chip -processors, where the processor core (CPU) and many peripheral devices -exist on a single piece of silicon. For these SOCs, an SOC node -should be used that defines child nodes for the devices that make -up the SOC. While platforms are not required to use this model in -order to boot the kernel, it is highly encouraged that all SOC -implementations define as complete a flat-device-tree as possible to -describe the devices on the SOC. This will allow for the -genericization of much of the kernel code. - - -1) Defining child nodes of an SOC ---------------------------------- - -Each device that is part of an SOC may have its own node entry inside -the SOC node. For each device that is included in the SOC, the unit -address property represents the address offset for this device's -memory-mapped registers in the parent's address space. The parent's -address space is defined by the "ranges" property in the top-level soc -node. The "reg" property for each node that exists directly under the -SOC node should contain the address mapping from the child address space -to the parent SOC address space and the size of the device's -memory-mapped register file. - -For many devices that may exist inside an SOC, there are predefined -specifications for the format of the device tree node. All SOC child -nodes should follow these specifications, except where noted in this -document. - -See appendix A for an example partial SOC node definition for the -MPC8540. - - -2) Representing devices without a current OF specification ----------------------------------------------------------- - -Currently, there are many devices on SoCs that do not have a standard -representation defined as part of the Open Firmware specifications, -mainly because the boards that contain these SoCs are not currently -booted using Open Firmware. Binding documentation for new devices -should be added to the Documentation/devicetree/bindings directory. -That directory will expand as device tree support is added to more and -more SoCs. - - -VII - Specifying interrupt information for devices -=================================================== - -The device tree represents the buses and devices of a hardware -system in a form similar to the physical bus topology of the -hardware. - -In addition, a logical 'interrupt tree' exists which represents the -hierarchy and routing of interrupts in the hardware. - -The interrupt tree model is fully described in the -document "Open Firmware Recommended Practice: Interrupt -Mapping Version 0.9". The document is available at: -<http://www.devicetree.org/open-firmware/practice/> - -1) interrupts property ----------------------- - -Devices that generate interrupts to a single interrupt controller -should use the conventional OF representation described in the -OF interrupt mapping documentation. - -Each device which generates interrupts must have an 'interrupt' -property. The interrupt property value is an arbitrary number of -of 'interrupt specifier' values which describe the interrupt or -interrupts for the device. - -The encoding of an interrupt specifier is determined by the -interrupt domain in which the device is located in the -interrupt tree. The root of an interrupt domain specifies in -its #interrupt-cells property the number of 32-bit cells -required to encode an interrupt specifier. See the OF interrupt -mapping documentation for a detailed description of domains. - -For example, the binding for the OpenPIC interrupt controller -specifies an #interrupt-cells value of 2 to encode the interrupt -number and level/sense information. All interrupt children in an -OpenPIC interrupt domain use 2 cells per interrupt in their interrupts -property. - -The PCI bus binding specifies a #interrupt-cells value of 1 to encode -which interrupt pin (INTA,INTB,INTC,INTD) is used. - -2) interrupt-parent property ----------------------------- - -The interrupt-parent property is specified to define an explicit -link between a device node and its interrupt parent in -the interrupt tree. The value of interrupt-parent is the -phandle of the parent node. - -If the interrupt-parent property is not defined for a node, its -interrupt parent is assumed to be an ancestor in the node's -*device tree* hierarchy. - -3) OpenPIC Interrupt Controllers --------------------------------- - -OpenPIC interrupt controllers require 2 cells to encode -interrupt information. The first cell defines the interrupt -number. The second cell defines the sense and level -information. - -Sense and level information should be encoded as follows: - - == ======================================== - 0 low to high edge sensitive type enabled - 1 active low level sensitive type enabled - 2 active high level sensitive type enabled - 3 high to low edge sensitive type enabled - == ======================================== - -4) ISA Interrupt Controllers ----------------------------- - -ISA PIC interrupt controllers require 2 cells to encode -interrupt information. The first cell defines the interrupt -number. The second cell defines the sense and level -information. - -ISA PIC interrupt controllers should adhere to the ISA PIC -encodings listed below: - - == ======================================== - 0 active low level sensitive type enabled - 1 active high level sensitive type enabled - 2 high to low edge sensitive type enabled - 3 low to high edge sensitive type enabled - == ======================================== - -VIII - Specifying Device Power Management Information (sleep property) -====================================================================== - -Devices on SOCs often have mechanisms for placing devices into low-power -states that are decoupled from the devices' own register blocks. Sometimes, -this information is more complicated than a cell-index property can -reasonably describe. Thus, each device controlled in such a manner -may contain a "sleep" property which describes these connections. - -The sleep property consists of one or more sleep resources, each of -which consists of a phandle to a sleep controller, followed by a -controller-specific sleep specifier of zero or more cells. - -The semantics of what type of low power modes are possible are defined -by the sleep controller. Some examples of the types of low power modes -that may be supported are: - - - Dynamic: The device may be disabled or enabled at any time. - - System Suspend: The device may request to be disabled or remain - awake during system suspend, but will not be disabled until then. - - Permanent: The device is disabled permanently (until the next hard - reset). - -Some devices may share a clock domain with each other, such that they should -only be suspended when none of the devices are in use. Where reasonable, -such nodes should be placed on a virtual bus, where the bus has the sleep -property. If the clock domain is shared among devices that cannot be -reasonably grouped in this manner, then create a virtual sleep controller -(similar to an interrupt nexus, except that defining a standardized -sleep-map should wait until its necessity is demonstrated). - -IX - Specifying dma bus information -=================================== - -Some devices may have DMA memory range shifted relatively to the beginning of -RAM, or even placed outside of kernel RAM. For example, the Keystone 2 SoC -worked in LPAE mode with 4G memory has: -- RAM range: [0x8 0000 0000, 0x8 FFFF FFFF] -- DMA range: [ 0x8000 0000, 0xFFFF FFFF] -and DMA range is aliased into first 2G of RAM in HW. - -In such cases, DMA addresses translation should be performed between CPU phys -and DMA addresses. The "dma-ranges" property is intended to be used -for describing the configuration of such system in DT. - -In addition, each DMA master device on the DMA bus may or may not support -coherent DMA operations. The "dma-coherent" property is intended to be used -for identifying devices supported coherent DMA operations in DT. - -* DMA Bus master - -Optional property: - -- dma-ranges: <prop-encoded-array> encoded as arbitrary number of triplets of - (child-bus-address, parent-bus-address, length). Each triplet specified - describes a contiguous DMA address range. - The dma-ranges property is used to describe the direct memory access (DMA) - structure of a memory-mapped bus whose device tree parent can be accessed - from DMA operations originating from the bus. It provides a means of - defining a mapping or translation between the physical address space of - the bus and the physical address space of the parent of the bus. - (for more information see the Devicetree Specification) - -* DMA Bus child - -Optional property: - -- dma-ranges: <empty> value. if present - It means that DMA addresses - translation has to be enabled for this device. -- dma-coherent: Present if dma operations are coherent - -Example:: - - soc { - compatible = "ti,keystone","simple-bus"; - ranges = <0x0 0x0 0x0 0xc0000000>; - dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; - - [...] - - usb: usb@2680000 { - compatible = "ti,keystone-dwc3"; - - [...] - dma-coherent; - }; - }; - -Appendix A - Sample SOC node for MPC8540 -======================================== - -:: - - soc@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-ccsr", "simple-bus"; - device_type = "soc"; - ranges = <0x00000000 0xe0000000 0x00100000> - bus-frequency = <0>; - interrupt-parent = <&pic>; - - ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar", "simple-bus"; - reg = <0x24000 0x1000>; - local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x00 ]; - interrupts = <0x29 2 0x30 2 0x34 2>; - phy-handle = <&phy0>; - sleep = <&pmc 0x00000080>; - ranges; - - mdio@24520 { - reg = <0x24520 0x20>; - compatible = "fsl,gianfar-mdio"; - - phy0: ethernet-phy@0 { - interrupts = <5 1>; - reg = <0>; - }; - - phy1: ethernet-phy@1 { - interrupts = <5 1>; - reg = <1>; - }; - - phy3: ethernet-phy@3 { - interrupts = <7 1>; - reg = <3>; - }; - }; - }; - - ethernet@25000 { - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x01 ]; - interrupts = <0x13 2 0x14 2 0x18 2>; - phy-handle = <&phy1>; - sleep = <&pmc 0x00000040>; - }; - - ethernet@26000 { - device_type = "network"; - model = "FEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x02 ]; - interrupts = <0x41 2>; - phy-handle = <&phy3>; - sleep = <&pmc 0x00000020>; - }; - - serial@4500 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-duart", "simple-bus"; - sleep = <&pmc 0x00000002>; - ranges; - - serial@4500 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <0x42 2>; - }; - - serial@4600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <0x42 2>; - }; - }; - - pic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - i2c@3000 { - interrupts = <0x43 2>; - reg = <0x3000 0x100>; - compatible = "fsl-i2c"; - dfsrr; - sleep = <&pmc 0x00000004>; - }; - - pmc: power@e0070 { - compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc"; - reg = <0xe0070 0x20>; - }; - }; diff --git a/Documentation/devicetree/index.rst b/Documentation/devicetree/index.rst index d2a96e1af23e..54026763916d 100644 --- a/Documentation/devicetree/index.rst +++ b/Documentation/devicetree/index.rst @@ -15,4 +15,3 @@ Open Firmware and Device Tree overlay-notes bindings/index - booting-without-of diff --git a/Documentation/doc-guide/kernel-doc.rst b/Documentation/doc-guide/kernel-doc.rst index fff6604631ea..52a87ab4c99f 100644 --- a/Documentation/doc-guide/kernel-doc.rst +++ b/Documentation/doc-guide/kernel-doc.rst @@ -387,22 +387,23 @@ Domain`_ references. Cross-referencing from reStructuredText ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -To cross-reference the functions and types defined in the kernel-doc comments -from reStructuredText documents, please use the `Sphinx C Domain`_ -references. For example:: +No additional syntax is needed to cross-reference the functions and types +defined in the kernel-doc comments from reStructuredText documents. +Just end function names with ``()`` and write ``struct``, ``union``, ``enum`` +or ``typedef`` before types. +For example:: - See function :c:func:`foo` and struct/union/enum/typedef :c:type:`bar`. + See foo(). + See struct foo. + See union bar. + See enum baz. + See typedef meh. -While the type reference works with just the type name, without the -struct/union/enum/typedef part in front, you may want to use:: +However, if you want custom text in the cross-reference link, that can be done +through the following syntax:: - See :c:type:`struct foo <foo>`. - See :c:type:`union bar <bar>`. - See :c:type:`enum baz <baz>`. - See :c:type:`typedef meh <meh>`. - -This will produce prettier links, and is in line with how kernel-doc does the -cross-references. + See :c:func:`my custom link text for function foo <foo>`. + See :c:type:`my custom link text for struct bar <bar>`. For further details, please refer to the `Sphinx C Domain`_ documentation. @@ -489,6 +490,14 @@ identifiers: *[ function/type ...]* .. kernel-doc:: lib/idr.c :identifiers: +no-identifiers: *[ function/type ...]* + Exclude documentation for each *function* and *type* in *source*. + + Example:: + + .. kernel-doc:: lib/bitmap.c + :no-identifiers: bitmap_parselist + functions: *[ function/type ...]* This is an alias of the 'identifiers' directive and deprecated. diff --git a/Documentation/doc-guide/sphinx.rst b/Documentation/doc-guide/sphinx.rst index f71ddd592aaa..896478baf570 100644 --- a/Documentation/doc-guide/sphinx.rst +++ b/Documentation/doc-guide/sphinx.rst @@ -337,6 +337,23 @@ Rendered as: - column 3 +Cross-referencing +----------------- + +Cross-referencing from one documentation page to another can be done by passing +the path to the file starting from the Documentation folder. +For example, to cross-reference to this page (the .rst extension is optional):: + + See Documentation/doc-guide/sphinx.rst. + +If you want to use a relative path, you need to use Sphinx's ``doc`` directive. +For example, referencing this page from the same directory would be done as:: + + See :doc:`sphinx`. + +For information on cross-referencing to kernel-doc functions or types, see +Documentation/doc-guide/kernel-doc.rst. + .. _sphinx_kfigure: Figures & Images diff --git a/Documentation/driver-api/80211/cfg80211.rst b/Documentation/driver-api/80211/cfg80211.rst index eeab91b59457..836f609c3f75 100644 --- a/Documentation/driver-api/80211/cfg80211.rst +++ b/Documentation/driver-api/80211/cfg80211.rst @@ -12,79 +12,32 @@ Device registration :doc: Device registration .. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_channel_flags - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_channel - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_rate_flags - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_rate - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_sta_ht_cap - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_supported_band - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_signal_type - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_params_flags - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_flags - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy - -.. kernel-doc:: include/net/cfg80211.h - :functions: wireless_dev - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_new - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_read_of_freq_limits - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_register - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_unregister - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_free - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_name - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_dev - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_priv - -.. kernel-doc:: include/net/cfg80211.h - :functions: priv_to_wiphy - -.. kernel-doc:: include/net/cfg80211.h - :functions: set_wiphy_dev - -.. kernel-doc:: include/net/cfg80211.h - :functions: wdev_priv - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_iface_limit - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_iface_combination - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_check_combinations + :functions: + ieee80211_channel_flags + ieee80211_channel + ieee80211_rate_flags + ieee80211_rate + ieee80211_sta_ht_cap + ieee80211_supported_band + cfg80211_signal_type + wiphy_params_flags + wiphy_flags + wiphy + wireless_dev + wiphy_new + wiphy_read_of_freq_limits + wiphy_register + wiphy_unregister + wiphy_free + wiphy_name + wiphy_dev + wiphy_priv + priv_to_wiphy + set_wiphy_dev + wdev_priv + ieee80211_iface_limit + ieee80211_iface_combination + cfg80211_check_combinations Actions and configuration ========================= @@ -93,139 +46,52 @@ Actions and configuration :doc: Actions and configuration .. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_ops - -.. kernel-doc:: include/net/cfg80211.h - :functions: vif_params - -.. kernel-doc:: include/net/cfg80211.h - :functions: key_params - -.. kernel-doc:: include/net/cfg80211.h - :functions: survey_info_flags - -.. kernel-doc:: include/net/cfg80211.h - :functions: survey_info - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_beacon_data - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_ap_settings - -.. kernel-doc:: include/net/cfg80211.h - :functions: station_parameters - -.. kernel-doc:: include/net/cfg80211.h - :functions: rate_info_flags - -.. kernel-doc:: include/net/cfg80211.h - :functions: rate_info - -.. kernel-doc:: include/net/cfg80211.h - :functions: station_info - -.. kernel-doc:: include/net/cfg80211.h - :functions: monitor_flags - -.. kernel-doc:: include/net/cfg80211.h - :functions: mpath_info_flags - -.. kernel-doc:: include/net/cfg80211.h - :functions: mpath_info - -.. kernel-doc:: include/net/cfg80211.h - :functions: bss_parameters - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_txq_params - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_crypto_settings - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_auth_request - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_assoc_request - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_deauth_request - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_disassoc_request - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_ibss_params - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_connect_params - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_pmksa - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_rx_mlme_mgmt - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_auth_timeout - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_rx_assoc_resp - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_assoc_timeout - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_tx_mlme_mgmt - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_ibss_joined - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_connect_resp_params - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_connect_done - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_connect_result - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_connect_bss - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_connect_timeout - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_roamed - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_disconnected - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_ready_on_channel - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_remain_on_channel_expired - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_new_sta - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_rx_mgmt - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_mgmt_tx_status - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_cqm_rssi_notify - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_cqm_pktloss_notify - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_michael_mic_failure + :functions: + cfg80211_ops + vif_params + key_params + survey_info_flags + survey_info + cfg80211_beacon_data + cfg80211_ap_settings + station_parameters + rate_info_flags + rate_info + station_info + monitor_flags + mpath_info_flags + mpath_info + bss_parameters + ieee80211_txq_params + cfg80211_crypto_settings + cfg80211_auth_request + cfg80211_assoc_request + cfg80211_deauth_request + cfg80211_disassoc_request + cfg80211_ibss_params + cfg80211_connect_params + cfg80211_pmksa + cfg80211_rx_mlme_mgmt + cfg80211_auth_timeout + cfg80211_rx_assoc_resp + cfg80211_assoc_timeout + cfg80211_tx_mlme_mgmt + cfg80211_ibss_joined + cfg80211_connect_resp_params + cfg80211_connect_done + cfg80211_connect_result + cfg80211_connect_bss + cfg80211_connect_timeout + cfg80211_roamed + cfg80211_disconnected + cfg80211_ready_on_channel + cfg80211_remain_on_channel_expired + cfg80211_new_sta + cfg80211_rx_mgmt + cfg80211_mgmt_tx_status + cfg80211_cqm_rssi_notify + cfg80211_cqm_pktloss_notify + cfg80211_michael_mic_failure Scanning and BSS list handling ============================== @@ -234,34 +100,17 @@ Scanning and BSS list handling :doc: Scanning and BSS list handling .. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_ssid - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_scan_request - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_scan_done - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_bss - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_inform_bss - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_inform_bss_frame_data - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_inform_bss_data - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_unlink_bss - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_find_ie - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_bss_get_ie + :functions: + cfg80211_ssid + cfg80211_scan_request + cfg80211_scan_done + cfg80211_bss + cfg80211_inform_bss + cfg80211_inform_bss_frame_data + cfg80211_inform_bss_data + cfg80211_unlink_bss + cfg80211_find_ie + ieee80211_bss_get_ie Utility functions ================= @@ -270,25 +119,14 @@ Utility functions :doc: Utility functions .. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_channel_to_frequency - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_frequency_to_channel - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_get_channel - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_get_response_rate - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_hdrlen - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_get_hdrlen_from_skb - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_radiotap_iterator + :functions: + ieee80211_channel_to_frequency + ieee80211_frequency_to_channel + ieee80211_get_channel + ieee80211_get_response_rate + ieee80211_hdrlen + ieee80211_get_hdrlen_from_skb + ieee80211_radiotap_iterator Data path helpers ================= @@ -297,13 +135,10 @@ Data path helpers :doc: Data path helpers .. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_data_to_8023 - -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_amsdu_to_8023s - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_classify8021d + :functions: + ieee80211_data_to_8023 + ieee80211_amsdu_to_8023s + cfg80211_classify8021d Regulatory enforcement infrastructure ===================================== @@ -312,13 +147,10 @@ Regulatory enforcement infrastructure :doc: Regulatory enforcement infrastructure .. kernel-doc:: include/net/cfg80211.h - :functions: regulatory_hint - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_apply_custom_regulatory - -.. kernel-doc:: include/net/cfg80211.h - :functions: freq_reg_info + :functions: + regulatory_hint + wiphy_apply_custom_regulatory + freq_reg_info RFkill integration ================== @@ -327,13 +159,10 @@ RFkill integration :doc: RFkill integration .. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_rfkill_set_hw_state - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_rfkill_start_polling - -.. kernel-doc:: include/net/cfg80211.h - :functions: wiphy_rfkill_stop_polling + :functions: + wiphy_rfkill_set_hw_state + wiphy_rfkill_start_polling + wiphy_rfkill_stop_polling Test mode ========= @@ -342,13 +171,8 @@ Test mode :doc: Test mode .. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_testmode_alloc_reply_skb - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_testmode_reply - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_testmode_alloc_event_skb - -.. kernel-doc:: include/net/cfg80211.h - :functions: cfg80211_testmode_event + :functions: + cfg80211_testmode_alloc_reply_skb + cfg80211_testmode_reply + cfg80211_testmode_alloc_event_skb + cfg80211_testmode_event diff --git a/Documentation/driver-api/80211/mac80211-advanced.rst b/Documentation/driver-api/80211/mac80211-advanced.rst index 24cb64b3b715..f8df7b3af8f5 100644 --- a/Documentation/driver-api/80211/mac80211-advanced.rst +++ b/Documentation/driver-api/80211/mac80211-advanced.rst @@ -15,25 +15,14 @@ appropriate trigger, which will then be triggered appropriately by mac80211. .. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_get_tx_led_name - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_get_rx_led_name - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_get_assoc_led_name - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_get_radio_led_name - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_tpt_blink - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_tpt_led_trigger_flags - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_create_tpt_led_trigger + :functions: + ieee80211_get_tx_led_name + ieee80211_get_rx_led_name + ieee80211_get_assoc_led_name + ieee80211_get_radio_led_name + ieee80211_tpt_blink + ieee80211_tpt_led_trigger_flags + ieee80211_create_tpt_led_trigger Hardware crypto acceleration ============================ @@ -42,22 +31,13 @@ Hardware crypto acceleration :doc: Hardware crypto acceleration .. kernel-doc:: include/net/mac80211.h - :functions: set_key_cmd - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_key_conf - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_key_flags - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_get_tkip_p1k - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_get_tkip_p1k_iv - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_get_tkip_p2k + :functions: + set_key_cmd + ieee80211_key_conf + ieee80211_key_flags + ieee80211_get_tkip_p1k + ieee80211_get_tkip_p1k_iv + ieee80211_get_tkip_p2k Powersave support ================= @@ -99,28 +79,15 @@ support for powersaving clients :doc: AP support for powersaving clients .. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_get_buffered_bc - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_beacon_get - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_sta_eosp - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_frame_release_type - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_sta_ps_transition - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_sta_ps_transition_ni - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_sta_set_buffered - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_sta_block_awake + :functions: + ieee80211_get_buffered_bc + ieee80211_beacon_get + ieee80211_sta_eosp + ieee80211_frame_release_type + ieee80211_sta_ps_transition + ieee80211_sta_ps_transition_ni + ieee80211_sta_set_buffered + ieee80211_sta_block_awake Supporting multiple virtual interfaces ====================================== @@ -134,10 +101,9 @@ addresses here, note which configurations are supported by mac80211, add notes about supporting hw crypto with it. .. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_iterate_active_interfaces - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_iterate_active_interfaces_atomic + :functions: + ieee80211_iterate_active_interfaces + ieee80211_iterate_active_interfaces_atomic Station handling ================ @@ -145,16 +111,11 @@ Station handling TODO .. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_sta - -.. kernel-doc:: include/net/mac80211.h - :functions: sta_notify_cmd - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_find_sta - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_find_sta_by_ifaddr + :functions: + ieee80211_sta + sta_notify_cmd + ieee80211_find_sta + ieee80211_find_sta_by_ifaddr Hardware scan offload ===================== @@ -193,10 +154,9 @@ Spatial Multiplexing Powersave (SMPS) :doc: Spatial multiplexing power save .. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_request_smps - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_smps_mode + :functions: + ieee80211_request_smps + ieee80211_smps_mode TBD @@ -209,22 +169,13 @@ Rate Control API TBD .. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_start_tx_ba_session - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_start_tx_ba_cb_irqsafe - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_stop_tx_ba_session - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_stop_tx_ba_cb_irqsafe - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_rate_control_changed - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_tx_rate_control + :functions: + ieee80211_start_tx_ba_session + ieee80211_start_tx_ba_cb_irqsafe + ieee80211_stop_tx_ba_session + ieee80211_stop_tx_ba_cb_irqsafe + ieee80211_rate_control_changed + ieee80211_tx_rate_control TBD @@ -261,10 +212,9 @@ Programming information ----------------------- .. kernel-doc:: net/mac80211/sta_info.h - :functions: sta_info - -.. kernel-doc:: net/mac80211/sta_info.h - :functions: ieee80211_sta_info_flags + :functions: + sta_info + ieee80211_sta_info_flags STA information lifetime rules ------------------------------ @@ -276,13 +226,10 @@ Aggregation Functions ===================== .. kernel-doc:: net/mac80211/sta_info.h - :functions: sta_ampdu_mlme - -.. kernel-doc:: net/mac80211/sta_info.h - :functions: tid_ampdu_tx - -.. kernel-doc:: net/mac80211/sta_info.h - :functions: tid_ampdu_rx + :functions: + sta_ampdu_mlme + tid_ampdu_tx + tid_ampdu_rx Synchronisation Functions ========================= diff --git a/Documentation/driver-api/80211/mac80211.rst b/Documentation/driver-api/80211/mac80211.rst index eab40bcf3987..67d2e58b45e4 100644 --- a/Documentation/driver-api/80211/mac80211.rst +++ b/Documentation/driver-api/80211/mac80211.rst @@ -30,31 +30,16 @@ Finally, a discussion of hardware capabilities should be done with references to other parts of the book. .. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_hw - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_hw_flags - -.. kernel-doc:: include/net/mac80211.h - :functions: SET_IEEE80211_DEV - -.. kernel-doc:: include/net/mac80211.h - :functions: SET_IEEE80211_PERM_ADDR - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_ops - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_alloc_hw - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_register_hw - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_unregister_hw - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_free_hw + :functions: + ieee80211_hw + ieee80211_hw_flags + SET_IEEE80211_DEV + SET_IEEE80211_PERM_ADDR + ieee80211_ops + ieee80211_alloc_hw + ieee80211_register_hw + ieee80211_unregister_hw + ieee80211_free_hw PHY configuration ================= @@ -65,10 +50,9 @@ This chapter should describe PHY handling including start/stop callbacks and the various structures used. .. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_conf - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_conf_flags + :functions: + ieee80211_conf + ieee80211_conf_flags Virtual interfaces ================== @@ -123,79 +107,32 @@ functions/definitions --------------------- .. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_rx_status - -.. kernel-doc:: include/net/mac80211.h - :functions: mac80211_rx_encoding_flags - -.. kernel-doc:: include/net/mac80211.h - :functions: mac80211_rx_flags - -.. kernel-doc:: include/net/mac80211.h - :functions: mac80211_tx_info_flags - -.. kernel-doc:: include/net/mac80211.h - :functions: mac80211_tx_control_flags - -.. kernel-doc:: include/net/mac80211.h - :functions: mac80211_rate_control_flags - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_tx_rate - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_tx_info - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_tx_info_clear_status - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_rx - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_rx_ni - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_rx_irqsafe - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_tx_status - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_tx_status_ni - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_tx_status_irqsafe - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_rts_get - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_rts_duration - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_ctstoself_get - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_ctstoself_duration - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_generic_frame_duration - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_wake_queue - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_stop_queue - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_wake_queues - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_stop_queues - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_queue_stopped + :functions: + ieee80211_rx_status + mac80211_rx_encoding_flags + mac80211_rx_flags + mac80211_tx_info_flags + mac80211_tx_control_flags + mac80211_rate_control_flags + ieee80211_tx_rate + ieee80211_tx_info + ieee80211_tx_info_clear_status + ieee80211_rx + ieee80211_rx_ni + ieee80211_rx_irqsafe + ieee80211_tx_status + ieee80211_tx_status_ni + ieee80211_tx_status_irqsafe + ieee80211_rts_get + ieee80211_rts_duration + ieee80211_ctstoself_get + ieee80211_ctstoself_duration + ieee80211_generic_frame_duration + ieee80211_wake_queue + ieee80211_stop_queue + ieee80211_wake_queues + ieee80211_stop_queues + ieee80211_queue_stopped Frame filtering =============== @@ -213,7 +150,6 @@ The mac80211 workqueue :doc: mac80211 workqueue .. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_queue_work - -.. kernel-doc:: include/net/mac80211.h - :functions: ieee80211_queue_delayed_work + :functions: + ieee80211_queue_work + ieee80211_queue_delayed_work diff --git a/Documentation/driver-api/basics.rst b/Documentation/driver-api/basics.rst index 1ba88c7b3984..3e2dae954898 100644 --- a/Documentation/driver-api/basics.rst +++ b/Documentation/driver-api/basics.rst @@ -12,6 +12,8 @@ Driver device table .. kernel-doc:: include/linux/mod_devicetable.h :internal: + :no-identifiers: pci_device_id + Delaying, scheduling, and timer routines ---------------------------------------- @@ -55,15 +57,6 @@ High-resolution timers .. kernel-doc:: kernel/time/hrtimer.c :export: -Workqueues and Kevents ----------------------- - -.. kernel-doc:: include/linux/workqueue.h - :internal: - -.. kernel-doc:: kernel/workqueue.c - :export: - Internal Functions ------------------ @@ -105,19 +98,15 @@ Kernel utility functions .. kernel-doc:: include/linux/kernel.h :internal: + :no-identifiers: kstrtol kstrtoul .. kernel-doc:: kernel/printk/printk.c :export: + :no-identifiers: printk .. kernel-doc:: kernel/panic.c :export: -.. kernel-doc:: kernel/rcu/tree.c - :export: - -.. kernel-doc:: kernel/rcu/update.c - :export: - .. kernel-doc:: include/linux/overflow.h :internal: diff --git a/Documentation/driver-api/device_connection.rst b/Documentation/driver-api/device_connection.rst deleted file mode 100644 index ba364224c349..000000000000 --- a/Documentation/driver-api/device_connection.rst +++ /dev/null @@ -1,43 +0,0 @@ -================== -Device connections -================== - -Introduction ------------- - -Devices often have connections to other devices that are outside of the direct -child/parent relationship. A serial or network communication controller, which -could be a PCI device, may need to be able to get a reference to its PHY -component, which could be attached for example to the I2C bus. Some device -drivers need to be able to control the clocks or the GPIOs for their devices, -and so on. - -Device connections are generic descriptions of any type of connection between -two separate devices. - -Device connections alone do not create a dependency between the two devices. -They are only descriptions which are not tied to either of the devices directly. -A dependency between the two devices exists only if one of the two endpoint -devices requests a reference to the other. The descriptions themselves can be -defined in firmware (not yet supported) or they can be built-in. - -Usage ------ - -Device connections should exist before device ``->probe`` callback is called for -either endpoint device in the description. If the connections are defined in -firmware, this is not a problem. It should be considered if the connection -descriptions are "built-in", and need to be added separately. - -The connection description consists of the names of the two devices with the -connection, i.e. the endpoints, and unique identifier for the connection which -is needed if there are multiple connections between the two devices. - -After a description exists, the devices in it can request reference to the other -endpoint device, or they can request the description itself. - -API ---- - -.. kernel-doc:: drivers/base/devcon.c - :functions: device_connection_find_match device_connection_find device_connection_add device_connection_remove diff --git a/Documentation/driver-api/device_link.rst b/Documentation/driver-api/device_link.rst index bc2d89af88ce..ee913ae16371 100644 --- a/Documentation/driver-api/device_link.rst +++ b/Documentation/driver-api/device_link.rst @@ -1,7 +1,3 @@ -.. |struct dev_pm_domain| replace:: :c:type:`struct dev_pm_domain <dev_pm_domain>` -.. |struct generic_pm_domain| replace:: :c:type:`struct generic_pm_domain <generic_pm_domain>` - - .. _device_link: ============ @@ -166,7 +162,7 @@ Examples is the same as if the MMU was the parent of the master device. The fact that both devices share the same power domain would normally - suggest usage of a |struct dev_pm_domain| or |struct generic_pm_domain|, + suggest usage of a struct dev_pm_domain or struct generic_pm_domain, however these are not independent devices that happen to share a power switch, but rather the MMU device serves the busmaster device and is useless without it. A device link creates a synthetic hierarchical @@ -202,7 +198,7 @@ Examples Alternatives ============ -* A |struct dev_pm_domain| can be used to override the bus, +* A struct dev_pm_domain can be used to override the bus, class or device type callbacks. It is intended for devices sharing a single on/off switch, however it does not guarantee a specific suspend/resume ordering, this needs to be implemented separately. @@ -211,7 +207,7 @@ Alternatives suspended. Furthermore it cannot be used to enforce a specific shutdown ordering or a driver presence dependency. -* A |struct generic_pm_domain| is a lot more heavyweight than a +* A struct generic_pm_domain is a lot more heavyweight than a device link and does not allow for shutdown ordering or driver presence dependencies. It also cannot be used on ACPI systems. @@ -321,5 +317,4 @@ State machine API === -.. kernel-doc:: drivers/base/core.c - :functions: device_link_add device_link_del device_link_remove +See device_link_add(), device_link_del() and device_link_remove(). diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst index 100bfd227265..4144b669e80c 100644 --- a/Documentation/driver-api/dma-buf.rst +++ b/Documentation/driver-api/dma-buf.rst @@ -85,7 +85,7 @@ consider though: - Memory mapping the contents of the DMA buffer is also supported. See the discussion below on `CPU Access to DMA Buffer Objects`_ for the full details. -- The DMA buffer FD is also pollable, see `Fence Poll Support`_ below for +- The DMA buffer FD is also pollable, see `Implicit Fence Poll Support`_ below for details. Basic Operation and Device DMA Access @@ -179,7 +179,7 @@ DMA Fence uABI/Sync File :internal: Indefinite DMA Fences -~~~~~~~~~~~~~~~~~~~~ +~~~~~~~~~~~~~~~~~~~~~ At various times &dma_fence with an indefinite time until dma_fence_wait() finishes have been proposed. Examples include: diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst index eaaaafc21134..bb676570acc3 100644 --- a/Documentation/driver-api/driver-model/devres.rst +++ b/Documentation/driver-api/driver-model/devres.rst @@ -263,7 +263,7 @@ DMA dmam_pool_destroy() DRM - devm_drm_dev_init() + devm_drm_dev_alloc() GPIO devm_gpiod_get() @@ -354,6 +354,7 @@ MEM devm_kmalloc() devm_kmalloc_array() devm_kmemdup() + devm_krealloc() devm_kstrdup() devm_kvasprintf() devm_kzalloc() diff --git a/Documentation/driver-api/firmware/fallback-mechanisms.rst b/Documentation/driver-api/firmware/fallback-mechanisms.rst index 036383dad6d6..5f04c3bcdf0c 100644 --- a/Documentation/driver-api/firmware/fallback-mechanisms.rst +++ b/Documentation/driver-api/firmware/fallback-mechanisms.rst @@ -42,6 +42,7 @@ fallback mechanism: supported for request_firmware_into_buf(). * Firmware is not accessible through typical means: + * It cannot be installed into the root filesystem * The firmware provides very unique device specific data tailored for the unit gathered with local information. An example is calibration diff --git a/Documentation/driver-api/fpga/fpga-bridge.rst b/Documentation/driver-api/fpga/fpga-bridge.rst index 71c5a40da320..198aadafd3e7 100644 --- a/Documentation/driver-api/fpga/fpga-bridge.rst +++ b/Documentation/driver-api/fpga/fpga-bridge.rst @@ -4,11 +4,11 @@ FPGA Bridge API to implement a new FPGA bridge ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -* struct :c:type:`fpga_bridge` — The FPGA Bridge structure -* struct :c:type:`fpga_bridge_ops` — Low level Bridge driver ops -* :c:func:`devm_fpga_bridge_create()` — Allocate and init a bridge struct -* :c:func:`fpga_bridge_register()` — Register a bridge -* :c:func:`fpga_bridge_unregister()` — Unregister a bridge +* struct fpga_bridge — The FPGA Bridge structure +* struct fpga_bridge_ops — Low level Bridge driver ops +* devm_fpga_bridge_create() — Allocate and init a bridge struct +* fpga_bridge_register() — Register a bridge +* fpga_bridge_unregister() — Unregister a bridge .. kernel-doc:: include/linux/fpga/fpga-bridge.h :functions: fpga_bridge diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst index 576f1945eacd..917ee22db429 100644 --- a/Documentation/driver-api/fpga/fpga-mgr.rst +++ b/Documentation/driver-api/fpga/fpga-mgr.rst @@ -101,12 +101,12 @@ in state. API for implementing a new FPGA Manager driver ---------------------------------------------- -* ``fpga_mgr_states`` — Values for :c:member:`fpga_manager->state`. -* struct :c:type:`fpga_manager` — the FPGA manager struct -* struct :c:type:`fpga_manager_ops` — Low level FPGA manager driver ops -* :c:func:`devm_fpga_mgr_create` — Allocate and init a manager struct -* :c:func:`fpga_mgr_register` — Register an FPGA manager -* :c:func:`fpga_mgr_unregister` — Unregister an FPGA manager +* ``fpga_mgr_states`` — Values for :c:expr:`fpga_manager->state`. +* struct fpga_manager — the FPGA manager struct +* struct fpga_manager_ops — Low level FPGA manager driver ops +* devm_fpga_mgr_create() — Allocate and init a manager struct +* fpga_mgr_register() — Register an FPGA manager +* fpga_mgr_unregister() — Unregister an FPGA manager .. kernel-doc:: include/linux/fpga/fpga-mgr.h :functions: fpga_mgr_states diff --git a/Documentation/driver-api/fpga/fpga-programming.rst b/Documentation/driver-api/fpga/fpga-programming.rst index b5484df6ff0f..002392dab04f 100644 --- a/Documentation/driver-api/fpga/fpga-programming.rst +++ b/Documentation/driver-api/fpga/fpga-programming.rst @@ -6,22 +6,22 @@ Overview The in-kernel API for FPGA programming is a combination of APIs from FPGA manager, bridge, and regions. The actual function used to -trigger FPGA programming is :c:func:`fpga_region_program_fpga()`. +trigger FPGA programming is fpga_region_program_fpga(). -:c:func:`fpga_region_program_fpga()` uses functionality supplied by +fpga_region_program_fpga() uses functionality supplied by the FPGA manager and bridges. It will: * lock the region's mutex * lock the mutex of the region's FPGA manager * build a list of FPGA bridges if a method has been specified to do so * disable the bridges - * program the FPGA using info passed in :c:member:`fpga_region->info`. + * program the FPGA using info passed in :c:expr:`fpga_region->info`. * re-enable the bridges * release the locks The struct fpga_image_info specifies what FPGA image to program. It is -allocated/freed by :c:func:`fpga_image_info_alloc()` and freed with -:c:func:`fpga_image_info_free()` +allocated/freed by fpga_image_info_alloc() and freed with +fpga_image_info_free() How to program an FPGA using a region ------------------------------------- @@ -84,10 +84,10 @@ will generate that list. Here's some sample code of what to do next:: API for programming an FPGA --------------------------- -* :c:func:`fpga_region_program_fpga` — Program an FPGA -* :c:type:`fpga_image_info` — Specifies what FPGA image to program -* :c:func:`fpga_image_info_alloc()` — Allocate an FPGA image info struct -* :c:func:`fpga_image_info_free()` — Free an FPGA image info struct +* fpga_region_program_fpga() — Program an FPGA +* fpga_image_info() — Specifies what FPGA image to program +* fpga_image_info_alloc() — Allocate an FPGA image info struct +* fpga_image_info_free() — Free an FPGA image info struct .. kernel-doc:: drivers/fpga/fpga-region.c :functions: fpga_region_program_fpga diff --git a/Documentation/driver-api/fpga/fpga-region.rst b/Documentation/driver-api/fpga/fpga-region.rst index 0529b2d2231a..363a8171ab0a 100644 --- a/Documentation/driver-api/fpga/fpga-region.rst +++ b/Documentation/driver-api/fpga/fpga-region.rst @@ -45,32 +45,32 @@ An example of usage can be seen in the probe function of [#f2]_. API to add a new FPGA region ---------------------------- -* struct :c:type:`fpga_region` — The FPGA region struct -* :c:func:`devm_fpga_region_create` — Allocate and init a region struct -* :c:func:`fpga_region_register` — Register an FPGA region -* :c:func:`fpga_region_unregister` — Unregister an FPGA region +* struct fpga_region — The FPGA region struct +* devm_fpga_region_create() — Allocate and init a region struct +* fpga_region_register() — Register an FPGA region +* fpga_region_unregister() — Unregister an FPGA region The FPGA region's probe function will need to get a reference to the FPGA Manager it will be using to do the programming. This usually would happen during the region's probe function. -* :c:func:`fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count -* :c:func:`of_fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count, +* fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count +* of_fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count, given a device node. -* :c:func:`fpga_mgr_put` — Put an FPGA manager +* fpga_mgr_put() — Put an FPGA manager The FPGA region will need to specify which bridges to control while programming the FPGA. The region driver can build a list of bridges during probe time -(:c:member:`fpga_region->bridge_list`) or it can have a function that creates +(:c:expr:`fpga_region->bridge_list`) or it can have a function that creates the list of bridges to program just before programming -(:c:member:`fpga_region->get_bridges`). The FPGA bridge framework supplies the +(:c:expr:`fpga_region->get_bridges`). The FPGA bridge framework supplies the following APIs to handle building or tearing down that list. -* :c:func:`fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a +* fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a list -* :c:func:`of_fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a +* of_fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a list, given a device node -* :c:func:`fpga_bridges_put` — Given a list of bridges, put them +* fpga_bridges_put() — Given a list of bridges, put them .. kernel-doc:: include/linux/fpga/fpga-region.h :functions: fpga_region diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst index 9809f593c0ab..072a7455044e 100644 --- a/Documentation/driver-api/gpio/driver.rst +++ b/Documentation/driver-api/gpio/driver.rst @@ -342,12 +342,12 @@ Cascaded GPIO irqchips usually fall in one of three categories: forced to a thread. The "fake?" raw lock can be used to work around this problem:: - raw_spinlock_t wa_lock; - static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank) - unsigned long wa_lock_flags; - raw_spin_lock_irqsave(&bank->wa_lock, wa_lock_flags); - generic_handle_irq(irq_find_mapping(bank->chip.irq.domain, bit)); - raw_spin_unlock_irqrestore(&bank->wa_lock, wa_lock_flags); + raw_spinlock_t wa_lock; + static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank) + unsigned long wa_lock_flags; + raw_spin_lock_irqsave(&bank->wa_lock, wa_lock_flags); + generic_handle_irq(irq_find_mapping(bank->chip.irq.domain, bit)); + raw_spin_unlock_irqrestore(&bank->wa_lock, wa_lock_flags); - GENERIC CHAINED GPIO IRQCHIPS: these are the same as "CHAINED GPIO irqchips", but chained IRQ handlers are not used. Instead GPIO IRQs dispatching is diff --git a/Documentation/driver-api/iio/buffers.rst b/Documentation/driver-api/iio/buffers.rst index dd64c9c5fb1e..3ddebddc02ca 100644 --- a/Documentation/driver-api/iio/buffers.rst +++ b/Documentation/driver-api/iio/buffers.rst @@ -2,7 +2,7 @@ Buffers ======= -* struct :c:type:`iio_buffer` — general buffer structure +* struct iio_buffer — general buffer structure * :c:func:`iio_validate_scan_mask_onehot` — Validates that exactly one channel is selected * :c:func:`iio_buffer_get` — Grab a reference to the buffer diff --git a/Documentation/driver-api/iio/core.rst b/Documentation/driver-api/iio/core.rst index b0bc0c028cc5..715cf29482a1 100644 --- a/Documentation/driver-api/iio/core.rst +++ b/Documentation/driver-api/iio/core.rst @@ -10,11 +10,11 @@ applications manipulating sensors. The implementation can be found under Industrial I/O Devices ---------------------- -* struct :c:type:`iio_dev` - industrial I/O device -* :c:func:`iio_device_alloc()` - allocate an :c:type:`iio_dev` from a driver -* :c:func:`iio_device_free()` - free an :c:type:`iio_dev` from a driver -* :c:func:`iio_device_register()` - register a device with the IIO subsystem -* :c:func:`iio_device_unregister()` - unregister a device from the IIO +* struct iio_dev - industrial I/O device +* iio_device_alloc() - allocate an :c:type:`iio_dev` from a driver +* iio_device_free() - free an :c:type:`iio_dev` from a driver +* iio_device_register() - register a device with the IIO subsystem +* iio_device_unregister() - unregister a device from the IIO subsystem An IIO device usually corresponds to a single hardware sensor and it @@ -34,17 +34,17 @@ A typical IIO driver will register itself as an :doc:`I2C <../i2c>` or At probe: -1. Call :c:func:`iio_device_alloc()`, which allocates memory for an IIO device. +1. Call iio_device_alloc(), which allocates memory for an IIO device. 2. Initialize IIO device fields with driver specific information (e.g. device name, device channels). -3. Call :c:func:`iio_device_register()`, this registers the device with the +3. Call iio_device_register(), this registers the device with the IIO core. After this call the device is ready to accept requests from user space applications. At remove, we free the resources allocated in probe in reverse order: -1. :c:func:`iio_device_unregister()`, unregister the device from the IIO core. -2. :c:func:`iio_device_free()`, free the memory allocated for the IIO device. +1. iio_device_unregister(), unregister the device from the IIO core. +2. iio_device_free(), free the memory allocated for the IIO device. IIO device sysfs interface ========================== @@ -66,7 +66,7 @@ Common attributes are: IIO device channels =================== -struct :c:type:`iio_chan_spec` - specification of a single channel +struct iio_chan_spec - specification of a single channel An IIO device channel is a representation of a data channel. An IIO device can have one or multiple channels. For example: @@ -77,7 +77,7 @@ have one or multiple channels. For example: * an accelerometer can have up to 3 channels representing acceleration on X, Y and Z axes. -An IIO channel is described by the struct :c:type:`iio_chan_spec`. +An IIO channel is described by the struct iio_chan_spec. A thermometer driver for the temperature sensor in the example above would have to describe its channel as follows:: diff --git a/Documentation/driver-api/iio/hw-consumer.rst b/Documentation/driver-api/iio/hw-consumer.rst index 819fb9edc005..76133a3796f2 100644 --- a/Documentation/driver-api/iio/hw-consumer.rst +++ b/Documentation/driver-api/iio/hw-consumer.rst @@ -8,7 +8,7 @@ software buffer for data. The implementation can be found under :file:`drivers/iio/buffer/hw-consumer.c` -* struct :c:type:`iio_hw_consumer` — Hardware consumer structure +* struct iio_hw_consumer — Hardware consumer structure * :c:func:`iio_hw_consumer_alloc` — Allocate IIO hardware consumer * :c:func:`iio_hw_consumer_free` — Free IIO hardware consumer * :c:func:`iio_hw_consumer_enable` — Enable IIO hardware consumer diff --git a/Documentation/driver-api/iio/triggered-buffers.rst b/Documentation/driver-api/iio/triggered-buffers.rst index 0db12660cc90..417555dbbdf4 100644 --- a/Documentation/driver-api/iio/triggered-buffers.rst +++ b/Documentation/driver-api/iio/triggered-buffers.rst @@ -10,7 +10,7 @@ IIO triggered buffer setup * :c:func:`iio_triggered_buffer_setup` — Setup triggered buffer and pollfunc * :c:func:`iio_triggered_buffer_cleanup` — Free resources allocated by :c:func:`iio_triggered_buffer_setup` -* struct :c:type:`iio_buffer_setup_ops` — buffer setup related callbacks +* struct iio_buffer_setup_ops — buffer setup related callbacks A typical triggered buffer setup looks like this:: diff --git a/Documentation/driver-api/iio/triggers.rst b/Documentation/driver-api/iio/triggers.rst index dfd7ba3eabde..288625e40672 100644 --- a/Documentation/driver-api/iio/triggers.rst +++ b/Documentation/driver-api/iio/triggers.rst @@ -2,7 +2,7 @@ Triggers ======== -* struct :c:type:`iio_trigger` — industrial I/O trigger device +* struct iio_trigger — industrial I/O trigger device * :c:func:`devm_iio_trigger_alloc` — Resource-managed iio_trigger_alloc * :c:func:`devm_iio_trigger_register` — Resource-managed iio_trigger_register iio_trigger_unregister @@ -63,7 +63,7 @@ Let's see a simple example of how to setup a trigger to be used by a driver:: IIO trigger ops =============== -* struct :c:type:`iio_trigger_ops` — operations structure for an iio_trigger. +* struct iio_trigger_ops — operations structure for an iio_trigger. Notice that a trigger has a set of operations attached: diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 5ef2cfe3a16b..f357f3eb400c 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -22,13 +22,11 @@ available subsections can be seen below. pm/index clk device-io - device_connection dma-buf device_link component message-based infiniband - sound frame-buffer regulator iio/index @@ -79,7 +77,6 @@ available subsections can be seen below. console dcdbas eisa - ipmb isa isapnp io-mapping diff --git a/Documentation/driver-api/infrastructure.rst b/Documentation/driver-api/infrastructure.rst index 06d98c4526df..683bd460e222 100644 --- a/Documentation/driver-api/infrastructure.rst +++ b/Documentation/driver-api/infrastructure.rst @@ -6,6 +6,7 @@ The Basic Device Driver-Model Structures .. kernel-doc:: include/linux/device.h :internal: + :no-identifiers: device_link_state Device Drivers Base ------------------- @@ -28,9 +29,6 @@ Device Drivers Base .. kernel-doc:: drivers/base/node.c :internal: -.. kernel-doc:: drivers/base/firmware_loader/main.c - :export: - .. kernel-doc:: drivers/base/transport_class.c :export: diff --git a/Documentation/driver-api/libata.rst b/Documentation/driver-api/libata.rst index e2f87b82b074..d477e296bda5 100644 --- a/Documentation/driver-api/libata.rst +++ b/Documentation/driver-api/libata.rst @@ -508,7 +508,7 @@ also complete commands. 2. ATA_QCFLAG_ACTIVE is cleared from qc->flags. -3. :c:func:`qc->complete_fn` callback is invoked. If the return value of the +3. :c:expr:`qc->complete_fn` callback is invoked. If the return value of the callback is not zero. Completion is short circuited and :c:func:`ata_qc_complete` returns. diff --git a/Documentation/driver-api/media/camera-sensor.rst b/Documentation/driver-api/media/camera-sensor.rst new file mode 100644 index 000000000000..4d1ae12b9b4d --- /dev/null +++ b/Documentation/driver-api/media/camera-sensor.rst @@ -0,0 +1,134 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Writing camera sensor drivers +============================= + +CSI-2 +----- + +Please see what is written on :ref:`MIPI_CSI_2`. + +Handling clocks +--------------- + +Camera sensors have an internal clock tree including a PLL and a number of +divisors. The clock tree is generally configured by the driver based on a few +input parameters that are specific to the hardware:: the external clock frequency +and the link frequency. The two parameters generally are obtained from system +firmware. No other frequencies should be used in any circumstances. + +The reason why the clock frequencies are so important is that the clock signals +come out of the SoC, and in many cases a specific frequency is designed to be +used in the system. Using another frequency may cause harmful effects +elsewhere. Therefore only the pre-determined frequencies are configurable by the +user. + +Frame size +---------- + +There are two distinct ways to configure the frame size produced by camera +sensors. + +Freely configurable camera sensor drivers +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Freely configurable camera sensor drivers expose the device's internal +processing pipeline as one or more sub-devices with different cropping and +scaling configurations. The output size of the device is the result of a series +of cropping and scaling operations from the device's pixel array's size. + +An example of such a driver is the smiapp driver (see drivers/media/i2c/smiapp). + +Register list based drivers +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Register list based drivers generally, instead of able to configure the device +they control based on user requests, are limited to a number of preset +configurations that combine a number of different parameters that on hardware +level are independent. How a driver picks such configuration is based on the +format set on a source pad at the end of the device's internal pipeline. + +Most sensor drivers are implemented this way, see e.g. +drivers/media/i2c/imx319.c for an example. + +Frame interval configuration +---------------------------- + +There are two different methods for obtaining possibilities for different frame +intervals as well as configuring the frame interval. Which one to implement +depends on the type of the device. + +Raw camera sensors +~~~~~~~~~~~~~~~~~~ + +Instead of a high level parameter such as frame interval, the frame interval is +a result of the configuration of a number of camera sensor implementation +specific parameters. Luckily, these parameters tend to be the same for more or +less all modern raw camera sensors. + +The frame interval is calculated using the following equation:: + + frame interval = (analogue crop width + horizontal blanking) * + (analogue crop height + vertical blanking) / pixel rate + +The formula is bus independent and is applicable for raw timing parameters on +large variety of devices beyond camera sensors. Devices that have no analogue +crop, use the full source image size, i.e. pixel array size. + +Horizontal and vertical blanking are specified by ``V4L2_CID_HBLANK`` and +``V4L2_CID_VBLANK``, respectively. The unit of these controls are lines. The +pixel rate is specified by ``V4L2_CID_PIXEL_RATE`` in the same sub-device. The +unit of that control is Hz. + +Register list based drivers need to implement read-only sub-device nodes for the +purpose. Devices that are not register list based need these to configure the +device's internal processing pipeline. + +The first entity in the linear pipeline is the pixel array. The pixel array may +be followed by other entities that are there to allow configuring binning, +skipping, scaling or digital crop :ref:`v4l2-subdev-selections`. + +USB cameras etc. devices +~~~~~~~~~~~~~~~~~~~~~~~~ + +USB video class hardware, as well as many cameras offering a similar higher +level interface natively, generally use the concept of frame interval (or frame +rate) on device level in firmware or hardware. This means lower level controls +implemented by raw cameras may not be used on uAPI (or even kAPI) to control the +frame interval on these devices. + +Power management +---------------- + +Always use runtime PM to manage the power states of your device. Camera sensor +drivers are in no way special in this respect: they are responsible for +controlling the power state of the device they otherwise control as well. In +general, the device must be powered on at least when its registers are being +accessed and when it is streaming. + +Existing camera sensor drivers may rely on the old +:c:type:`v4l2_subdev_core_ops`->s_power() callback for bridge or ISP drivers to +manage their power state. This is however **deprecated**. If you feel you need +to begin calling an s_power from an ISP or a bridge driver, instead please add +runtime PM support to the sensor driver you are using. Likewise, new drivers +should not use s_power. + +Please see examples in e.g. ``drivers/media/i2c/ov8856.c`` and +``drivers/media/i2c/smiapp/smiapp-core.c``. The two drivers work in both ACPI +and DT based systems. + +Control framework +~~~~~~~~~~~~~~~~~ + +``v4l2_ctrl_handler_setup()`` function may not be used in the device's runtime +PM ``runtime_resume`` callback, as it has no way to figure out the power state +of the device. This is because the power state of the device is only changed +after the power state transition has taken place. The ``s_ctrl`` callback can be +used to obtain device's power state after the power state transition: + +.. c:function:: + int pm_runtime_get_if_in_use(struct device *dev); + +The function returns a non-zero value if it succeeded getting the power count or +runtime PM was disabled, in either of which cases the driver may proceed to +access the device. diff --git a/Documentation/driver-api/media/cec-core.rst b/Documentation/driver-api/media/cec-core.rst index 3ce26b7c2b2b..bc42982ac21e 100644 --- a/Documentation/driver-api/media/cec-core.rst +++ b/Documentation/driver-api/media/cec-core.rst @@ -36,8 +36,9 @@ The struct cec_adapter represents the CEC adapter hardware. It is created by calling cec_allocate_adapter() and deleted by calling cec_delete_adapter(): .. c:function:: - struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, void *priv, - const char *name, u32 caps, u8 available_las); + struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, \ + void *priv, const char *name, \ + u32 caps, u8 available_las); .. c:function:: void cec_delete_adapter(struct cec_adapter *adap); @@ -74,7 +75,8 @@ To register the /dev/cecX device node and the remote control device (if CEC_CAP_RC is set) you call: .. c:function:: - int cec_register_adapter(struct cec_adapter *adap, struct device *parent); + int cec_register_adapter(struct cec_adapter *adap, \ + struct device *parent); where parent is the parent device. @@ -96,7 +98,7 @@ Implementing the Low-Level CEC Adapter The following low-level adapter operations have to be implemented in your driver: -.. c:type:: struct cec_adap_ops +.. c:struct:: cec_adap_ops .. code-block:: none @@ -123,9 +125,8 @@ The seven low-level ops deal with various aspects of controlling the CEC adapter hardware: -To enable/disable the hardware: +To enable/disable the hardware:: -.. c:function:: int (*adap_enable)(struct cec_adapter *adap, bool enable); This callback enables or disables the CEC hardware. Enabling the CEC hardware @@ -137,9 +138,8 @@ state of the CEC adapter after calling cec_allocate_adapter() is disabled. Note that adap_enable must return 0 if enable is false. -To enable/disable the 'monitor all' mode: +To enable/disable the 'monitor all' mode:: -.. c:function:: int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable); If enabled, then the adapter should be put in a mode to also monitor messages @@ -150,9 +150,8 @@ called if the CEC_CAP_MONITOR_ALL capability is set. This callback is optional Note that adap_monitor_all_enable must return 0 if enable is false. -To enable/disable the 'monitor pin' mode: +To enable/disable the 'monitor pin' mode:: -.. c:function:: int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable); If enabled, then the adapter should be put in a mode to also monitor CEC pin @@ -163,9 +162,8 @@ the CEC_CAP_MONITOR_PIN capability is set. This callback is optional Note that adap_monitor_pin_enable must return 0 if enable is false. -To program a new logical address: +To program a new logical address:: -.. c:function:: int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); If logical_addr == CEC_LOG_ADDR_INVALID then all programmed logical addresses @@ -177,9 +175,8 @@ can receive directed messages to that address. Note that adap_log_addr must return 0 if logical_addr is CEC_LOG_ADDR_INVALID. -To transmit a new message: +To transmit a new message:: -.. c:function:: int (*adap_transmit)(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg); @@ -196,17 +193,15 @@ The CEC_FREE_TIME_TO_USEC macro can be used to convert signal_free_time to microseconds (one data bit period is 2.4 ms). -To log the current CEC hardware status: +To log the current CEC hardware status:: -.. c:function:: void (*adap_status)(struct cec_adapter *adap, struct seq_file *file); This optional callback can be used to show the status of the CEC hardware. The status is available through debugfs: cat /sys/kernel/debug/cec/cecX/status -To free any resources when the adapter is deleted: +To free any resources when the adapter is deleted:: -.. c:function:: void (*adap_free)(struct cec_adapter *adap); This optional callback can be used to free any resources that might have been @@ -216,15 +211,14 @@ allocated by the driver. It's called from cec_delete_adapter. Your adapter driver will also have to react to events (typically interrupt driven) by calling into the framework in the following situations: -When a transmit finished (successfully or otherwise): +When a transmit finished (successfully or otherwise):: -.. c:function:: - void cec_transmit_done(struct cec_adapter *adap, u8 status, u8 arb_lost_cnt, - u8 nack_cnt, u8 low_drive_cnt, u8 error_cnt); + void cec_transmit_done(struct cec_adapter *adap, u8 status, + u8 arb_lost_cnt, u8 nack_cnt, u8 low_drive_cnt, + u8 error_cnt); -or: +or:: -.. c:function:: void cec_transmit_attempt_done(struct cec_adapter *adap, u8 status); The status can be one of: @@ -341,17 +335,15 @@ So this must work: $ cat einj.txt >error-inj The first callback is called when this file is read and it should show the -the current error injection state: +the current error injection state:: -.. c:function:: int (*error_inj_show)(struct cec_adapter *adap, struct seq_file *sf); It is recommended that it starts with a comment block with basic usage information. It returns 0 for success and an error otherwise. -The second callback will parse commands written to the ``error-inj`` file: +The second callback will parse commands written to the ``error-inj`` file:: -.. c:function:: bool (*error_inj_parse_line)(struct cec_adapter *adap, char *line); The ``line`` argument points to the start of the command. Any leading @@ -382,9 +374,8 @@ CEC protocol driven. The following high-level callbacks are available: }; The received() callback allows the driver to optionally handle a newly -received CEC message +received CEC message:: -.. c:function:: int (*received)(struct cec_adapter *adap, struct cec_msg *msg); If the driver wants to process a CEC message, then it can implement this @@ -399,15 +390,14 @@ CEC framework functions CEC Adapter drivers can call the following CEC framework functions: .. c:function:: - int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg, - bool block); + int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg, \ + bool block); Transmit a CEC message. If block is true, then wait until the message has been transmitted, otherwise just queue it and return. .. c:function:: - void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, - bool block); + void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block); Change the physical address. This function will set adap->phys_addr and send an event if it has changed. If cec_s_log_addrs() has been called and @@ -422,15 +412,15 @@ to another valid physical address, then this function will first set the address to CEC_PHYS_ADDR_INVALID before enabling the new physical address. .. c:function:: - void cec_s_phys_addr_from_edid(struct cec_adapter *adap, - const struct edid *edid); + void cec_s_phys_addr_from_edid(struct cec_adapter *adap, \ + const struct edid *edid); A helper function that extracts the physical address from the edid struct and calls cec_s_phys_addr() with that address, or CEC_PHYS_ADDR_INVALID if the EDID did not contain a physical address or edid was a NULL pointer. .. c:function:: - int cec_s_log_addrs(struct cec_adapter *adap, + int cec_s_log_addrs(struct cec_adapter *adap, \ struct cec_log_addrs *log_addrs, bool block); Claim the CEC logical addresses. Should never be called if CEC_CAP_LOG_ADDRS diff --git a/Documentation/driver-api/media/csi2.rst b/Documentation/driver-api/media/csi2.rst index 17cad435f1a0..e1b838014906 100644 --- a/Documentation/driver-api/media/csi2.rst +++ b/Documentation/driver-api/media/csi2.rst @@ -1,5 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 +.. _MIPI_CSI_2: + MIPI CSI-2 ========== diff --git a/Documentation/driver-api/media/drivers/index.rst b/Documentation/driver-api/media/drivers/index.rst index 0df85fc96605..eb7011782863 100644 --- a/Documentation/driver-api/media/drivers/index.rst +++ b/Documentation/driver-api/media/drivers/index.rst @@ -25,6 +25,7 @@ Video4Linux (V4L) drivers sh_mobile_ceu_camera tuners vimc-devel + zoran Digital TV drivers @@ -35,4 +36,5 @@ Digital TV drivers dvb-usb frontends + vidtv contributors diff --git a/Documentation/driver-api/media/drivers/vidtv.rst b/Documentation/driver-api/media/drivers/vidtv.rst new file mode 100644 index 000000000000..65115448c52d --- /dev/null +++ b/Documentation/driver-api/media/drivers/vidtv.rst @@ -0,0 +1,425 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +vidtv: Virtual Digital TV driver +================================ + +Author: Daniel W. S. Almeida <dwlsalmeida@gmail.com>, June 2020. + +Background +---------- + +Vidtv is a virtual DVB driver that aims to serve as a reference for driver +writers by serving as a template. It also validates the existing media DVB +APIs, thus helping userspace application writers. + +Currently, it consists of: + +- A fake tuner driver, which will report a bad signal quality if the chosen + frequency is too far away from a table of valid frequencies for a + particular delivery system. + +- A fake demod driver, which will constantly poll the fake signal quality + returned by the tuner, simulating a device that can lose/reacquire a lock + on the signal depending on the CNR levels. + +- A fake bridge driver, which is the module responsible for modprobing the + fake tuner and demod modules and implementing the demux logic. This module + takes parameters at initialization that will dictate how the simulation + behaves. + +- Code reponsible for encoding a valid MPEG Transport Stream, which is then + passed to the bridge driver. This fake stream contains some hardcoded content. + For now, we have a single, audio-only channel containing a single MPEG + Elementary Stream, which in turn contains a SMPTE 302m encoded sine-wave. + Note that this particular encoder was chosen because it is the easiest + way to encode PCM audio data in a MPEG Transport Stream. + +Building vidtv +-------------- +vidtv is a test driver and thus is **not** enabled by default when +compiling the kernel. + +In order to enable compilation of vidtv: + +- Enable **DVB_TEST_DRIVERS**, then +- Enable **DVB_VIDTV** + +When compiled as a module, expect the following .ko files: + +- dvb_vidtv_tuner.ko + +- dvb_vidtv_demod.ko + +- dvb_vidtv_bridge.ko + +Running vidtv +------------- +When compiled as a module, run:: + + modprobe vidtv + +That's it! The bridge driver will initialize the tuner and demod drivers as +part of its own initialization. + +By default, it will accept the following frequencies: + + - 474 MHz for DVB-T/T2/C; + - 11,362 GHz for DVB-S/S2. + +For satellite systems, the driver simulates an universal extended +LNBf, with frequencies at Ku-Band, ranging from 10.7 GHz to 12.75 GHz. + +You can optionally define some command-line arguments to vidtv. + +Command-line arguments to vidtv +------------------------------- +Below is a list of all arguments that can be supplied to vidtv: + +drop_tslock_prob_on_low_snr + Probability of losing the TS lock if the signal quality is bad. + This probability be used by the fake demodulator driver to + eventually return a status of 0 when the signal quality is not + good. + +recover_tslock_prob_on_good_snr: + Probability recovering the TS lock when the signal improves. This + probability be used by the fake demodulator driver to eventually + return a status of 0x1f when/if the signal quality improves. + +mock_power_up_delay_msec + Simulate a power up delay. Default: 0. + +mock_tune_delay_msec + Simulate a tune delay. Default 0. + +vidtv_valid_dvb_t_freqs + Valid DVB-T frequencies to simulate, in Hz. + +vidtv_valid_dvb_c_freqs + Valid DVB-C frequencies to simulate, in Hz. + +vidtv_valid_dvb_s_freqs + Valid DVB-S/S2 frequencies to simulate at Ku-Band, in kHz. + +max_frequency_shift_hz, + Maximum shift in HZ allowed when tuning in a channel. + +si_period_msec + How often to send SI packets. Default: 40ms. + +pcr_period_msec + How often to send PCR packets. Default: 40ms. + +mux_rate_kbytes_sec + Attempt to maintain this bit rate by inserting TS null packets, if + necessary. Default: 4096. + +pcr_pid, + PCR PID for all channels. Default: 0x200. + +mux_buf_sz_pkts, + Size for the mux buffer in multiples of 188 bytes. + +vidtv internal structure +------------------------ +The kernel modules are split in the following way: + +vidtv_tuner.[ch] + Implements a fake tuner DVB driver. + +vidtv_demod.[ch] + Implements a fake demodulator DVB driver. + +vidtv_bridge.[ch] + Implements a bridge driver. + +The MPEG related code is split in the following way: + +vidtv_ts.[ch] + Code to work with MPEG TS packets, such as TS headers, adaptation + fields, PCR packets and NULL packets. + +vidtv_psi.[ch] + This is the PSI generator. PSI packets contain general information + about a MPEG Transport Stream. A PSI generator is needed so + userspace apps can retrieve information about the Transport Stream + and eventually tune into a (dummy) channel. + + Because the generator is implemented in a separate file, it can be + reused elsewhere in the media subsystem. + + Currently vidtv supports working with 3 PSI tables: PAT, PMT and + SDT. + + The specification for PAT and PMT can be found in *ISO 13818-1: + Systems*, while the specification for the SDT can be found in *ETSI + EN 300 468: Specification for Service Information (SI) in DVB + systems*. + + It isn't strictly necessary, but using a real TS file helps when + debugging PSI tables. Vidtv currently tries to replicate the PSI + structure found in this file: `TS1Globo.ts + <https://tsduck.io/streams/brazil-isdb-tb/TS1globo.ts>`_. + + A good way to visualize the structure of streams is by using + `DVBInspector <https://sourceforge.net/projects/dvbinspector/>`_. + +vidtv_pes.[ch] + Implements the PES logic to convert encoder data into MPEG TS + packets. These can then be fed into a TS multiplexer and eventually + into userspace. + +vidtv_encoder.h + An interface for vidtv encoders. New encoders can be added to this + driver by implementing the calls in this file. + +vidtv_s302m.[ch] + Implements a S302M encoder to make it possible to insert PCM audio + data in the generated MPEG Transport Stream. The relevant + specification is available online as *SMPTE 302M-2007: Television - + Mapping of AES3 Data into MPEG-2 Transport Stream*. + + + The resulting MPEG Elementary Stream is conveyed in a private + stream with a S302M registration descriptor attached. + + This shall enable passing an audio signal into userspace so it can + be decoded and played by media software. The corresponding decoder + in ffmpeg is located in 'libavcodec/s302m.c' and is experimental. + +vidtv_channel.[ch] + Implements a 'channel' abstraction. + + When vidtv boots, it will create some hardcoded channels: + + #. Their services will be concatenated to populate the SDT. + + #. Their programs will be concatenated to populate the PAT + + #. For each program in the PAT, a PMT section will be created + + #. The PMT section for a channel will be assigned its streams. + + #. Every stream will have its corresponding encoder polled in a + loop to produce TS packets. + These packets may be interleaved by the muxer and then delivered + to the bridge. + +vidtv_mux.[ch] + Implements a MPEG TS mux, loosely based on the ffmpeg + implementation in "libavcodec/mpegtsenc.c" + + The muxer runs a loop which is responsible for: + + #. Keeping track of the amount of time elapsed since the last + iteration. + + #. Polling encoders in order to fetch 'elapsed_time' worth of data. + + #. Inserting PSI and/or PCR packets, if needed. + + #. Padding the resulting stream with NULL packets if + necessary in order to maintain the chosen bit rate. + + #. Delivering the resulting TS packets to the bridge + driver so it can pass them to the demux. + +Testing vidtv with v4l-utils +---------------------------- + +Using the tools in v4l-utils is a great way to test and inspect the output of +vidtv. It is hosted here: `v4l-utils Documentation +<https://linuxtv.org/wiki/index.php/V4l-utils>`_. + +From its webpage:: + + The v4l-utils are a series of packages for handling media devices. + + It is hosted at http://git.linuxtv.org/v4l-utils.git, and packaged + on most distributions. + + It provides a series of libraries and utilities to be used to + control several aspect of the media boards. + + +Start by installing v4l-utils and then modprobing vidtv:: + + modprobe dvb_vidtv_bridge + +If the driver is OK, it should load and its probing code will run. This will +pull in the tuner and demod drivers. + +Using dvb-fe-tool +~~~~~~~~~~~~~~~~~ + +The first step to check whether the demod loaded successfully is to run:: + + $ dvb-fe-tool + +This should return what is currently set up at the demod struct, i.e.:: + + static const struct dvb_frontend_ops vidtv_demod_ops = { + .delsys = { + SYS_DVBT, + SYS_DVBT2, + SYS_DVBC_ANNEX_A, + SYS_DVBS, + SYS_DVBS2, + }, + + .info = { + .name = "Dummy demod for DVB-T/T2/C/S/S2", + .frequency_min_hz = 51 * MHz, + .frequency_max_hz = 2150 * MHz, + .frequency_stepsize_hz = 62500, + .frequency_tolerance_hz = 29500 * kHz, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_8_9 | + FE_CAN_QAM_16 | + FE_CAN_QAM_64 | + FE_CAN_QAM_32 | + FE_CAN_QAM_128 | + FE_CAN_QAM_256 | + FE_CAN_QAM_AUTO | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO | + FE_CAN_INVERSION_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO, + } + + .... + +For more information on dvb-fe-tools check its online documentation here: +`dvb-fe-tool Documentation +<https://www.linuxtv.org/wiki/index.php/Dvb-fe-tool>`_. + +Using dvb-scan +~~~~~~~~~~~~~~ + +In order to tune into a channel and read the PSI tables, we can use dvb-scan. + +For this, one should provide a configuration file known as a 'scan file', +here's an example:: + + [Channel] + FREQUENCY = 330000000 + MODULATION = QAM/AUTO + SYMBOL_RATE = 6940000 + INNER_FEC = AUTO + DELIVERY_SYSTEM = DVBC/ANNEX_A + +.. note:: + The parameters depend on the video standard you're testing. + +.. note:: + Vidtv is a fake driver and does not validate much of the information + in the scan file. Just specifying 'FREQUENCY' and 'DELIVERY_SYSTEM' + should be enough for DVB-T/DVB-T2. For DVB-S/DVB-C however, you + should also provide 'SYMBOL_RATE'. + +You can browse scan tables online here: `dvb-scan-tables +<https://git.linuxtv.org/dtv-scan-tables.git>`_. + +Assuming this channel is named 'channel.conf', you can then run:: + + $ dvbv5-scan channel.conf + +For more information on dvb-scan, check its documentation online here: +`dvb-scan Documentation <https://www.linuxtv.org/wiki/index.php/Dvbscan>`_. + +Using dvb-zap +~~~~~~~~~~~~~ + +dvbv5-zap is a command line tool that can be used to record MPEG-TS to disk. The +typical use is to tune into a channel and put it into record mode. The example +below - which is taken from the documentation - illustrates that:: + + $ dvbv5-zap -c dvb_channel.conf "trilhas sonoras" -r + using demux '/dev/dvb/adapter0/demux0' + reading channels from file 'dvb_channel.conf' + service has pid type 05: 204 + tuning to 573000000 Hz + audio pid 104 + dvb_set_pesfilter 104 + Lock (0x1f) Quality= Good Signal= 100.00% C/N= -13.80dB UCB= 70 postBER= 3.14x10^-3 PER= 0 + DVR interface '/dev/dvb/adapter0/dvr0' can now be opened + +The channel can be watched by playing the contents of the DVR interface, with +some player that recognizes the MPEG-TS format, such as *mplayer* or *vlc*. + +By playing the contents of the stream one can visually inspect the workings of +vidtv, e.g.:: + + $ mplayer /dev/dvb/adapter0/dvr0 + +For more information on dvb-zap check its online documentation here: +`dvb-zap Documentation +<https://www.linuxtv.org/wiki/index.php/Dvbv5-zap>`_. +See also: `zap <https://www.linuxtv.org/wiki/index.php/Zap>`_. + + +What can still be improved in vidtv +----------------------------------- + +Add *debugfs* integration +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Although frontend drivers provide DVBv5 statistics via the .read_status +call, a nice addition would be to make additional statistics available to +userspace via debugfs, which is a simple-to-use, RAM-based filesystem +specifically designed for debug purposes. + +The logic for this would be implemented on a separate file so as not to +pollute the frontend driver. These statistics are driver-specific and can +be useful during tests. + +The Siano driver is one example of a driver using +debugfs to convey driver-specific statistics to userspace and it can be +used as a reference. + +This should be further enabled and disabled via a Kconfig +option for convenience. + +Add a way to test video +~~~~~~~~~~~~~~~~~~~~~~~ + +Currently, vidtv can only encode PCM audio. It would be great to implement +a barebones version of MPEG-2 video encoding so we can also test video. The +first place to look into is *ISO 13818-2: Information technology — Generic +coding of moving pictures and associated audio information — Part 2: Video*, +which covers the encoding of compressed video in MPEG Transport Streams. + +This might optionally use the Video4Linux2 Test Pattern Generator, v4l2-tpg, +which resides at:: + + drivers/media/common/v4l2-tpg/ + + +Add white noise simulation +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The vidtv tuner already has code to identify whether the chosen frequency +is too far away from a table of valid frequencies. For now, this means that +the demodulator can eventually lose the lock on the signal, since the tuner will +report a bad signal quality. + +A nice addition is to simulate some noise when the signal quality is bad by: + +- Randomly dropping some TS packets. This will trigger a continuity error if the + continuity counter is updated but the packet is not passed on to the demux. + +- Updating the error statistics accordingly (e.g. BER, etc). + +- Simulating some noise in the encoded data. diff --git a/Documentation/driver-api/media/drivers/zoran.rst b/Documentation/driver-api/media/drivers/zoran.rst new file mode 100644 index 000000000000..83cbae9cedef --- /dev/null +++ b/Documentation/driver-api/media/drivers/zoran.rst @@ -0,0 +1,575 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The Zoran driver +================ + +unified zoran driver (zr360x7, zoran, buz, dc10(+), dc30(+), lml33) + +website: http://mjpeg.sourceforge.net/driver-zoran/ + + +Frequently Asked Questions +-------------------------- + +What cards are supported +------------------------ + +Iomega Buz, Linux Media Labs LML33/LML33R10, Pinnacle/Miro +DC10/DC10+/DC30/DC30+ and related boards (available under various names). + +Iomega Buz +~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7111 TV decoder +* Philips saa7185 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, saa7111, saa7185, zr36060, zr36067 + +Inputs/outputs: Composite and S-video + +Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 7 + +AverMedia 6 Eyes AVS6EYES +~~~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Samsung ks0127 TV decoder +* Conexant bt866 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, ks0127, bt866, zr36060, zr36067 + +Inputs/outputs: + Six physical inputs. 1-6 are composite, + 1-2, 3-4, 5-6 doubles as S-video, + 1-3 triples as component. + One composite output. + +Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 8 + +.. note:: + + Not autodetected, card=8 is necessary. + +Linux Media Labs LML33 +~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Brooktree bt819 TV decoder +* Brooktree bt856 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, bt819, bt856, zr36060, zr36067 + +Inputs/outputs: Composite and S-video + +Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 5 + +Linux Media Labs LML33R10 +~~~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7114 TV decoder +* Analog Devices adv7170 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, saa7114, adv7170, zr36060, zr36067 + +Inputs/outputs: Composite and S-video + +Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 6 + +Pinnacle/Miro DC10(new) +~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36057 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7110a TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, saa7110, adv7175, zr36060, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 1 + +Pinnacle/Miro DC10+ +~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7110a TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, saa7110, adv7175, zr36060, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 2 + +Pinnacle/Miro DC10(old) +~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36057 PCI controller +* Zoran zr36050 MJPEG codec +* Zoran zr36016 Video Front End or Fuji md0211 Video Front End (clone?) +* Micronas vpx3220a TV decoder +* mse3000 TV encoder or Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, vpx3220, mse3000/adv7175, zr36050, zr36016, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 0 + +Pinnacle/Miro DC30 +~~~~~~~~~~~~~~~~~~ + +* Zoran zr36057 PCI controller +* Zoran zr36050 MJPEG codec +* Zoran zr36016 Video Front End +* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36016, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 3 + +Pinnacle/Miro DC30+ +~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36050 MJPEG codec +* Zoran zr36016 Video Front End +* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36015, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 4 + +.. note:: + + #) No module for the mse3000 is available yet + #) No module for the vpx3224 is available yet + +1.1 What the TV decoder can do an what not +------------------------------------------ + +The best know TV standards are NTSC/PAL/SECAM. but for decoding a frame that +information is not enough. There are several formats of the TV standards. +And not every TV decoder is able to handle every format. Also the every +combination is supported by the driver. There are currently 11 different +tv broadcast formats all aver the world. + +The CCIR defines parameters needed for broadcasting the signal. +The CCIR has defined different standards: A,B,D,E,F,G,D,H,I,K,K1,L,M,N,... +The CCIR says not much about the colorsystem used !!! +And talking about a colorsystem says not to much about how it is broadcast. + +The CCIR standards A,E,F are not used any more. + +When you speak about NTSC, you usually mean the standard: CCIR - M using +the NTSC colorsystem which is used in the USA, Japan, Mexico, Canada +and a few others. + +When you talk about PAL, you usually mean: CCIR - B/G using the PAL +colorsystem which is used in many Countries. + +When you talk about SECAM, you mean: CCIR - L using the SECAM Colorsystem +which is used in France, and a few others. + +There the other version of SECAM, CCIR - D/K is used in Bulgaria, China, +Slovakai, Hungary, Korea (Rep.), Poland, Rumania and a others. + +The CCIR - H uses the PAL colorsystem (sometimes SECAM) and is used in +Egypt, Libya, Sri Lanka, Syrain Arab. Rep. + +The CCIR - I uses the PAL colorsystem, and is used in Great Britain, Hong Kong, +Ireland, Nigeria, South Africa. + +The CCIR - N uses the PAL colorsystem and PAL frame size but the NTSC framerate, +and is used in Argentinia, Uruguay, an a few others + +We do not talk about how the audio is broadcast ! + +A rather good sites about the TV standards are: +http://www.sony.jp/support/ +http://info.electronicwerkstatt.de/bereiche/fernsehtechnik/frequenzen_und_normen/Fernsehnormen/ +and http://www.cabl.com/restaurant/channel.html + +Other weird things around: NTSC 4.43 is a modificated NTSC, which is mainly +used in PAL VCR's that are able to play back NTSC. PAL 60 seems to be the same +as NTSC 4.43 . The Datasheets also talk about NTSC 44, It seems as if it would +be the same as NTSC 4.43. +NTSC Combs seems to be a decoder mode where the decoder uses a comb filter +to split coma and luma instead of a Delay line. + +But I did not defiantly find out what NTSC Comb is. + +Philips saa7111 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1997, is used in the BUZ and +- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC N, NTSC 4.43 and SECAM + +Philips saa7110a TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1995, is used in the Pinnacle/Miro DC10(new), DC10+ and +- can handle: PAL B/G, NTSC M and SECAM + +Philips saa7114 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 2000, is used in the LML33R10 and +- can handle: PAL B/G/D/H/I/N, PAL N, PAL M, NTSC M, NTSC 4.43 and SECAM + +Brooktree bt819 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, and is used in the LML33 and +- can handle: PAL B/D/G/H/I, NTSC M + +Micronas vpx3220a TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, is used in the DC30 and DC30+ and +- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC 44, PAL 60, SECAM,NTSC Comb + +Samsung ks0127 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~ + +- is used in the AVS6EYES card and +- can handle: NTSC-M/N/44, PAL-M/N/B/G/H/I/D/K/L and SECAM + + +What the TV encoder can do an what not +-------------------------------------- + +The TV encoder is doing the "same" as the decoder, but in the other direction. +You feed them digital data and the generate a Composite or SVHS signal. +For information about the colorsystems and TV norm take a look in the +TV decoder section. + +Philips saa7185 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, is used in the BUZ +- can generate: PAL B/G, NTSC M + +Brooktree bt856 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1994, is used in the LML33 +- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL-N (Argentina) + +Analog Devices adv7170 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 2000, is used in the LML300R10 +- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL 60 + +Analog Devices adv7175 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, is used in the DC10, DC10+, DC10 old, DC30, DC30+ +- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M + +ITT mse3000 TV encoder +~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1991, is used in the DC10 old +- can generate: PAL , NTSC , SECAM + +Conexant bt866 TV encoder +~~~~~~~~~~~~~~~~~~~~~~~~~ + +- is used in AVS6EYES, and +- can generate: NTSC/PAL, PALÂM, PALÂN + +The adv717x, should be able to produce PAL N. But you find nothing PAL N +specific in the registers. Seem that you have to reuse a other standard +to generate PAL N, maybe it would work if you use the PAL M settings. + +How do I get this damn thing to work +------------------------------------ + +Load zr36067.o. If it can't autodetect your card, use the card=X insmod +option with X being the card number as given in the previous section. +To have more than one card, use card=X1[,X2[,X3,[X4[..]]]] + +To automate this, add the following to your /etc/modprobe.d/zoran.conf: + +options zr36067 card=X1[,X2[,X3[,X4[..]]]] +alias char-major-81-0 zr36067 + +One thing to keep in mind is that this doesn't load zr36067.o itself yet. It +just automates loading. If you start using xawtv, the device won't load on +some systems, since you're trying to load modules as a user, which is not +allowed ("permission denied"). A quick workaround is to add 'Load "v4l"' to +XF86Config-4 when you use X by default, or to run 'v4l-conf -c <device>' in +one of your startup scripts (normally rc.local) if you don't use X. Both +make sure that the modules are loaded on startup, under the root account. + +What mainboard should I use (or why doesn't my card work) +--------------------------------------------------------- + + +<insert lousy disclaimer here>. In short: good=SiS/Intel, bad=VIA. + +Experience tells us that people with a Buz, on average, have more problems +than users with a DC10+/LML33. Also, it tells us that people owning a VIA- +based mainboard (ktXXX, MVP3) have more problems than users with a mainboard +based on a different chipset. Here's some notes from Andrew Stevens: + +Here's my experience of using LML33 and Buz on various motherboards: + +- VIA MVP3 + - Forget it. Pointless. Doesn't work. +- Intel 430FX (Pentium 200) + - LML33 perfect, Buz tolerable (3 or 4 frames dropped per movie) +- Intel 440BX (early stepping) + - LML33 tolerable. Buz starting to get annoying (6-10 frames/hour) +- Intel 440BX (late stepping) + - Buz tolerable, LML3 almost perfect (occasional single frame drops) +- SiS735 + - LML33 perfect, Buz tolerable. +- VIA KT133(*) + - LML33 starting to get annoying, Buz poor enough that I have up. + +- Both 440BX boards were dual CPU versions. + +Bernhard Praschinger later added: + +- AMD 751 + - Buz perfect-tolerable +- AMD 760 + - Buz perfect-tolerable + +In general, people on the user mailinglist won't give you much of a chance +if you have a VIA-based motherboard. They may be cheap, but sometimes, you'd +rather want to spend some more money on better boards. In general, VIA +mainboard's IDE/PCI performance will also suck badly compared to others. +You'll noticed the DC10+/DC30+ aren't mentioned anywhere in the overview. +Basically, you can assume that if the Buz works, the LML33 will work too. If +the LML33 works, the DC10+/DC30+ will work too. They're most tolerant to +different mainboard chipsets from all of the supported cards. + +If you experience timeouts during capture, buy a better mainboard or lower +the quality/buffersize during capture (see 'Concerning buffer sizes, quality, +output size etc.'). If it hangs, there's little we can do as of now. Check +your IRQs and make sure the card has its own interrupts. + +Programming interface +--------------------- + +This driver conforms to video4linux2. Support for V4L1 and for the custom +zoran ioctls has been removed in kernel 2.6.38. + +For programming example, please, look at lavrec.c and lavplay.c code in +the MJPEG-tools (http://mjpeg.sf.net/). + +Additional notes for software developers: + + The driver returns maxwidth and maxheight parameters according to + the current TV standard (norm). Therefore, the software which + communicates with the driver and "asks" for these parameters should + first set the correct norm. Well, it seems logically correct: TV + standard is "more constant" for current country than geometry + settings of a variety of TV capture cards which may work in ITU or + square pixel format. + +Applications +------------ + +Applications known to work with this driver: + +TV viewing: + +* xawtv +* kwintv +* probably any TV application that supports video4linux or video4linux2. + +MJPEG capture/playback: + +* mjpegtools/lavtools (or Linux Video Studio) +* gstreamer +* mplayer + +General raw capture: + +* xawtv +* gstreamer +* probably any application that supports video4linux or video4linux2 + +Video editing: + +* Cinelerra +* MainActor +* mjpegtools (or Linux Video Studio) + + +Concerning buffer sizes, quality, output size etc. +-------------------------------------------------- + + +The zr36060 can do 1:2 JPEG compression. This is really the theoretical +maximum that the chipset can reach. The driver can, however, limit compression +to a maximum (size) of 1:4. The reason for this is that some cards (e.g. Buz) +can't handle 1:2 compression without stopping capture after only a few minutes. +With 1:4, it'll mostly work. If you have a Buz, use 'low_bitrate=1' to go into +1:4 max. compression mode. + +100% JPEG quality is thus 1:2 compression in practice. So for a full PAL frame +(size 720x576). The JPEG fields are stored in YUY2 format, so the size of the +fields are 720x288x16/2 bits/field (2 fields/frame) = 207360 bytes/field x 2 = +414720 bytes/frame (add some more bytes for headers and DHT (huffman)/DQT +(quantization) tables, and you'll get to something like 512kB per frame for +1:2 compression. For 1:4 compression, you'd have frames of half this size. + +Some additional explanation by Martin Samuelsson, which also explains the +importance of buffer sizes: +-- +> Hmm, I do not think it is really that way. With the current (downloaded +> at 18:00 Monday) driver I get that output sizes for 10 sec: +> -q 50 -b 128 : 24.283.332 Bytes +> -q 50 -b 256 : 48.442.368 +> -q 25 -b 128 : 24.655.992 +> -q 25 -b 256 : 25.859.820 + +I woke up, and can't go to sleep again. I'll kill some time explaining why +this doesn't look strange to me. + +Let's do some math using a width of 704 pixels. I'm not sure whether the Buz +actually use that number or not, but that's not too important right now. + +704x288 pixels, one field, is 202752 pixels. Divided by 64 pixels per block; +3168 blocks per field. Each pixel consist of two bytes; 128 bytes per block; +1024 bits per block. 100% in the new driver mean 1:2 compression; the maximum +output becomes 512 bits per block. Actually 510, but 512 is simpler to use +for calculations. + +Let's say that we specify d1q50. We thus want 256 bits per block; times 3168 +becomes 811008 bits; 101376 bytes per field. We're talking raw bits and bytes +here, so we don't need to do any fancy corrections for bits-per-pixel or such +things. 101376 bytes per field. + +d1 video contains two fields per frame. Those sum up to 202752 bytes per +frame, and one of those frames goes into each buffer. + +But wait a second! -b128 gives 128kB buffers! It's not possible to cram +202752 bytes of JPEG data into 128kB! + +This is what the driver notice and automatically compensate for in your +examples. Let's do some math using this information: + +128kB is 131072 bytes. In this buffer, we want to store two fields, which +leaves 65536 bytes for each field. Using 3168 blocks per field, we get +20.68686868... available bytes per block; 165 bits. We can't allow the +request for 256 bits per block when there's only 165 bits available! The -q50 +option is silently overridden, and the -b128 option takes precedence, leaving +us with the equivalence of -q32. + +This gives us a data rate of 165 bits per block, which, times 3168, sums up +to 65340 bytes per field, out of the allowed 65536. The current driver has +another level of rate limiting; it won't accept -q values that fill more than +6/8 of the specified buffers. (I'm not sure why. "Playing it safe" seem to be +a safe bet. Personally, I think I would have lowered requested-bits-per-block +by one, or something like that.) We can't use 165 bits per block, but have to +lower it again, to 6/8 of the available buffer space: We end up with 124 bits +per block, the equivalence of -q24. With 128kB buffers, you can't use greater +than -q24 at -d1. (And PAL, and 704 pixels width...) + +The third example is limited to -q24 through the same process. The second +example, using very similar calculations, is limited to -q48. The only +example that actually grab at the specified -q value is the last one, which +is clearly visible, looking at the file size. +-- + +Conclusion: the quality of the resulting movie depends on buffer size, quality, +whether or not you use 'low_bitrate=1' as insmod option for the zr36060.c +module to do 1:4 instead of 1:2 compression, etc. + +If you experience timeouts, lowering the quality/buffersize or using +'low_bitrate=1 as insmod option for zr36060.o might actually help, as is +proven by the Buz. + +It hangs/crashes/fails/whatevers! Help! +--------------------------------------- + +Make sure that the card has its own interrupts (see /proc/interrupts), check +the output of dmesg at high verbosity (load zr36067.o with debug=2, +load all other modules with debug=1). Check that your mainboard is favorable +(see question 2) and if not, test the card in another computer. Also see the +notes given in question 3 and try lowering quality/buffersize/capturesize +if recording fails after a period of time. + +If all this doesn't help, give a clear description of the problem including +detailed hardware information (memory+brand, mainboard+chipset+brand, which +MJPEG card, processor, other PCI cards that might be of interest), give the +system PnP information (/proc/interrupts, /proc/dma, /proc/devices), and give +the kernel version, driver version, glibc version, gcc version and any other +information that might possibly be of interest. Also provide the dmesg output +at high verbosity. See 'Contacting' on how to contact the developers. + +Maintainers/Contacting +---------------------- + +Previous maintainers/developers of this driver are +- Laurent Pinchart <laurent.pinchart@skynet.be> +- Ronald Bultje rbultje@ronald.bitfreak.net +- Serguei Miridonov <mirsev@cicese.mx> +- Wolfgang Scherr <scherr@net4you.net> +- Dave Perks <dperks@ibm.net> +- Rainer Johanni <Rainer@Johanni.de> + +Driver's License +---------------- + + This driver is distributed under the terms of the General Public License. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + +See http://www.gnu.org/ for more information. diff --git a/Documentation/driver-api/media/dtv-frontend.rst b/Documentation/driver-api/media/dtv-frontend.rst index b362109bb131..91f77fe58e83 100644 --- a/Documentation/driver-api/media/dtv-frontend.rst +++ b/Documentation/driver-api/media/dtv-frontend.rst @@ -125,7 +125,7 @@ responsible for tuning the device. It supports multiple algorithms to detect a channel, as defined at enum :c:func:`dvbfe_algo`. The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver -doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to +doesn't fill its field at struct dvb_frontend_ops, it will default to ``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning, e. g. it will try first to use the specified center frequency ``f``, then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|, @@ -140,7 +140,7 @@ define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``. a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to define its own hardware-assisted algorithm. Very few hardware need to use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other - function callbacks at struct :c:type:`dvb_frontend_ops`. + function callbacks at struct dvb_frontend_ops. Attaching frontend driver to the bridge driver ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/driver-api/media/index.rst b/Documentation/driver-api/media/index.rst index 328350924853..c140692454b1 100644 --- a/Documentation/driver-api/media/index.rst +++ b/Documentation/driver-api/media/index.rst @@ -34,6 +34,7 @@ Please see: mc-core cec-core csi2 + camera-sensor drivers/index diff --git a/Documentation/driver-api/media/mc-core.rst b/Documentation/driver-api/media/mc-core.rst index 05bba0b61748..57b5bbba944e 100644 --- a/Documentation/driver-api/media/mc-core.rst +++ b/Documentation/driver-api/media/mc-core.rst @@ -36,7 +36,7 @@ pad to a sink pad. Media device ^^^^^^^^^^^^ -A media device is represented by a struct :c:type:`media_device` +A media device is represented by a struct media_device instance, defined in ``include/media/media-device.h``. Allocation of the structure is handled by the media device driver, usually by embedding the :c:type:`media_device` instance in a larger driver-specific @@ -49,7 +49,7 @@ and unregistered by calling :c:func:`media_device_unregister()`. Entities ^^^^^^^^ -Entities are represented by a struct :c:type:`media_entity` +Entities are represented by a struct media_entity instance, defined in ``include/media/media-entity.h``. The structure is usually embedded into a higher-level structure, such as :c:type:`v4l2_subdev` or :c:type:`video_device` @@ -67,10 +67,10 @@ Interfaces ^^^^^^^^^^ Interfaces are represented by a -struct :c:type:`media_interface` instance, defined in +struct media_interface instance, defined in ``include/media/media-entity.h``. Currently, only one type of interface is defined: a device node. Such interfaces are represented by a -struct :c:type:`media_intf_devnode`. +struct media_intf_devnode. Drivers initialize and create device node interfaces by calling :c:func:`media_devnode_create()` @@ -79,7 +79,7 @@ and remove them by calling: Pads ^^^^ -Pads are represented by a struct :c:type:`media_pad` instance, +Pads are represented by a struct media_pad instance, defined in ``include/media/media-entity.h``. Each entity stores its pads in a pads array managed by the entity driver. Drivers usually embed the array in a driver-specific structure. @@ -87,8 +87,8 @@ a driver-specific structure. Pads are identified by their entity and their 0-based index in the pads array. -Both information are stored in the struct :c:type:`media_pad`, -making the struct :c:type:`media_pad` pointer the canonical way +Both information are stored in the struct media_pad, +making the struct media_pad pointer the canonical way to store and pass link references. Pads have flags that describe the pad capabilities and state. @@ -104,7 +104,7 @@ Pads have flags that describe the pad capabilities and state. Links ^^^^^ -Links are represented by a struct :c:type:`media_link` instance, +Links are represented by a struct media_link instance, defined in ``include/media/media-entity.h``. There are two types of links: **1. pad to pad links**: @@ -187,7 +187,7 @@ Use count and power handling Due to the wide differences between drivers regarding power management needs, the media controller does not implement power management. However, -the struct :c:type:`media_entity` includes a ``use_count`` +the struct media_entity includes a ``use_count`` field that media drivers can use to track the number of users of every entity for power management needs. @@ -213,11 +213,11 @@ prevent link states from being modified during streaming by calling The function will mark all entities connected to the given entity through enabled links, either directly or indirectly, as streaming. -The struct :c:type:`media_pipeline` instance pointed to by +The struct media_pipeline instance pointed to by the pipe argument will be stored in every entity in the pipeline. -Drivers should embed the struct :c:type:`media_pipeline` +Drivers should embed the struct media_pipeline in higher-level pipeline structures and can then access the -pipeline through the struct :c:type:`media_entity` +pipeline through the struct media_entity pipe field. Calls to :c:func:`media_pipeline_start()` can be nested. diff --git a/Documentation/driver-api/media/v4l2-controls.rst b/Documentation/driver-api/media/v4l2-controls.rst index 5129019afb49..77f42ea3bac7 100644 --- a/Documentation/driver-api/media/v4l2-controls.rst +++ b/Documentation/driver-api/media/v4l2-controls.rst @@ -27,7 +27,7 @@ V4L2 specification with respect to controls in a central place. And to make life as easy as possible for the driver developer. Note that the control framework relies on the presence of a struct -:c:type:`v4l2_device` for V4L2 drivers and struct :c:type:`v4l2_subdev` for +:c:type:`v4l2_device` for V4L2 drivers and struct v4l2_subdev for sub-device drivers. diff --git a/Documentation/driver-api/media/v4l2-dev.rst b/Documentation/driver-api/media/v4l2-dev.rst index 63c064837c00..666330af31ed 100644 --- a/Documentation/driver-api/media/v4l2-dev.rst +++ b/Documentation/driver-api/media/v4l2-dev.rst @@ -67,7 +67,7 @@ You should also set these fields of :c:type:`video_device`: file operation is called this lock will be taken by the core and released afterwards. See the next section for more details. -- :c:type:`video_device`->queue: a pointer to the struct :c:type:`vb2_queue` +- :c:type:`video_device`->queue: a pointer to the struct vb2_queue associated with this device node. If queue is not ``NULL``, and queue->lock is not ``NULL``, then queue->lock is used for the queuing ioctls (``VIDIOC_REQBUFS``, ``CREATE_BUFS``, @@ -81,7 +81,7 @@ You should also set these fields of :c:type:`video_device`: - :c:type:`video_device`->prio: keeps track of the priorities. Used to implement ``VIDIOC_G_PRIORITY`` and ``VIDIOC_S_PRIORITY``. - If left to ``NULL``, then it will use the struct :c:type:`v4l2_prio_state` + If left to ``NULL``, then it will use the struct v4l2_prio_state in :c:type:`v4l2_device`. If you want to have a separate priority state per (group of) device node(s), then you can point it to your own struct :c:type:`v4l2_prio_state`. @@ -95,7 +95,7 @@ You should also set these fields of :c:type:`video_device`: but it is used by both a raw video PCI device (cx8800) and a MPEG PCI device (cx8802). Since the :c:type:`v4l2_device` cannot be associated with two PCI devices at the same time it is setup without a parent device. But when the - struct :c:type:`video_device` is initialized you **do** know which parent + struct video_device is initialized you **do** know which parent PCI device to use and so you set ``dev_device`` to the correct PCI device. If you use :c:type:`v4l2_ioctl_ops`, then you should set @@ -138,7 +138,7 @@ ioctls and locking ------------------ The V4L core provides optional locking services. The main service is the -lock field in struct :c:type:`video_device`, which is a pointer to a mutex. +lock field in struct video_device, which is a pointer to a mutex. If you set this pointer, then that will be used by unlocked_ioctl to serialize all ioctls. diff --git a/Documentation/driver-api/media/v4l2-device.rst b/Documentation/driver-api/media/v4l2-device.rst index 5e25bf182c18..7bd9c45f551b 100644 --- a/Documentation/driver-api/media/v4l2-device.rst +++ b/Documentation/driver-api/media/v4l2-device.rst @@ -3,7 +3,7 @@ V4L2 device instance -------------------- -Each device instance is represented by a struct :c:type:`v4l2_device`. +Each device instance is represented by a struct v4l2_device. Very simple devices can just allocate this struct, but most of the time you would embed this struct inside a larger struct. @@ -18,9 +18,9 @@ dev->driver_data field is ``NULL``, it will be linked to Drivers that want integration with the media device framework need to set dev->driver_data manually to point to the driver-specific device structure -that embed the struct :c:type:`v4l2_device` instance. This is achieved by a +that embed the struct v4l2_device instance. This is achieved by a ``dev_set_drvdata()`` call before registering the V4L2 device instance. -They must also set the struct :c:type:`v4l2_device` mdev field to point to a +They must also set the struct v4l2_device mdev field to point to a properly initialized and registered :c:type:`media_device` instance. If :c:type:`v4l2_dev <v4l2_device>`\ ->name is empty then it will be set to a diff --git a/Documentation/driver-api/media/v4l2-event.rst b/Documentation/driver-api/media/v4l2-event.rst index a4b7ae2b94d8..5b8254eba7da 100644 --- a/Documentation/driver-api/media/v4l2-event.rst +++ b/Documentation/driver-api/media/v4l2-event.rst @@ -44,18 +44,18 @@ such objects. So to summarize: -- struct :c:type:`v4l2_fh` has two lists: one of the ``subscribed`` events, +- struct v4l2_fh has two lists: one of the ``subscribed`` events, and one of the ``available`` events. -- struct :c:type:`v4l2_subscribed_event` has a ringbuffer of raised +- struct v4l2_subscribed_event has a ringbuffer of raised (pending) events of that particular type. -- If struct :c:type:`v4l2_subscribed_event` is associated with a specific +- If struct v4l2_subscribed_event is associated with a specific object, then that object will have an internal list of - struct :c:type:`v4l2_subscribed_event` so it knows who subscribed an + struct v4l2_subscribed_event so it knows who subscribed an event to that object. -Furthermore, the internal struct :c:type:`v4l2_subscribed_event` has +Furthermore, the internal struct v4l2_subscribed_event has ``merge()`` and ``replace()`` callbacks which drivers can set. These callbacks are called when a new event is raised and there is no more room. diff --git a/Documentation/driver-api/media/v4l2-fh.rst b/Documentation/driver-api/media/v4l2-fh.rst index 4c62b19af744..3eeaa8da0c9e 100644 --- a/Documentation/driver-api/media/v4l2-fh.rst +++ b/Documentation/driver-api/media/v4l2-fh.rst @@ -3,11 +3,11 @@ V4L2 File handlers ------------------ -struct :c:type:`v4l2_fh` provides a way to easily keep file handle specific +struct v4l2_fh provides a way to easily keep file handle specific data that is used by the V4L2 framework. .. attention:: - New drivers must use struct :c:type:`v4l2_fh` + New drivers must use struct v4l2_fh since it is also used to implement priority handling (:ref:`VIDIOC_G_PRIORITY`). @@ -16,11 +16,11 @@ whether a driver uses :c:type:`v4l2_fh` as its ``file->private_data`` pointer by testing the ``V4L2_FL_USES_V4L2_FH`` bit in :c:type:`video_device`->flags. This bit is set whenever :c:func:`v4l2_fh_init` is called. -struct :c:type:`v4l2_fh` is allocated as a part of the driver's own file handle +struct v4l2_fh is allocated as a part of the driver's own file handle structure and ``file->private_data`` is set to it in the driver's ``open()`` function by the driver. -In many cases the struct :c:type:`v4l2_fh` will be embedded in a larger +In many cases the struct v4l2_fh will be embedded in a larger structure. In that case you should call: #) :c:func:`v4l2_fh_init` and :c:func:`v4l2_fh_add` in ``open()`` @@ -102,18 +102,18 @@ Below is a short description of the :c:type:`v4l2_fh` functions used: memory can be freed. -If struct :c:type:`v4l2_fh` is not embedded, then you can use these helper functions: +If struct v4l2_fh is not embedded, then you can use these helper functions: :c:func:`v4l2_fh_open <v4l2_fh_open>` (struct file \*filp) -- This allocates a struct :c:type:`v4l2_fh`, initializes it and adds it to - the struct :c:type:`video_device` associated with the file struct. +- This allocates a struct v4l2_fh, initializes it and adds it to + the struct video_device associated with the file struct. :c:func:`v4l2_fh_release <v4l2_fh_release>` (struct file \*filp) -- This deletes it from the struct :c:type:`video_device` associated with the +- This deletes it from the struct video_device associated with the file struct, uninitialised the :c:type:`v4l2_fh` and frees it. These two functions can be plugged into the v4l2_file_operation's ``open()`` diff --git a/Documentation/driver-api/media/v4l2-subdev.rst b/Documentation/driver-api/media/v4l2-subdev.rst index bc7e1fc40a9d..bb5b1a7cdfd9 100644 --- a/Documentation/driver-api/media/v4l2-subdev.rst +++ b/Documentation/driver-api/media/v4l2-subdev.rst @@ -34,7 +34,7 @@ provides host private data for that purpose that can be accessed with From the bridge driver perspective, you load the sub-device module and somehow obtain the :c:type:`v4l2_subdev` pointer. For i2c devices this is easy: you call ``i2c_get_clientdata()``. For other buses something similar needs to be done. -Helper functions exists for sub-devices on an I2C bus that do most of this +Helper functions exist for sub-devices on an I2C bus that do most of this tricky work for you. Each :c:type:`v4l2_subdev` contains function pointers that sub-device drivers @@ -110,7 +110,7 @@ pads: err = media_entity_pads_init(&sd->entity, npads, pads); The pads array must have been previously initialized. There is no need to -manually set the struct :c:type:`media_entity` function and name fields, but the +manually set the struct media_entity function and name fields, but the revision field must be initialized if needed. A reference to the entity will be automatically acquired/released when the @@ -138,6 +138,9 @@ ensures that width, height and the media bus pixel code are equal on both source and sink of the link. Subdev drivers are also free to use this function to perform the checks mentioned above in addition to their own checks. +Subdev registration +~~~~~~~~~~~~~~~~~~~ + There are currently two ways to register subdevices with the V4L2 core. The first (traditional) possibility is to have subdevices registered by bridge drivers. This can be done when the bridge driver has the complete information @@ -157,7 +160,7 @@ below. Using one or the other registration method only affects the probing process, the run-time bridge-subdevice interaction is in both cases the same. -In the synchronous case a device (bridge) driver needs to register the +In the **synchronous** case a device (bridge) driver needs to register the :c:type:`v4l2_subdev` with the v4l2_device: :c:func:`v4l2_device_register_subdev <v4l2_device_register_subdev>` @@ -179,7 +182,51 @@ You can unregister a sub-device using: Afterwards the subdev module can be unloaded and :c:type:`sd <v4l2_subdev>`->dev == ``NULL``. -You can call an ops function either directly: +In the **asynchronous** case subdevice probing can be invoked independently of +the bridge driver availability. The subdevice driver then has to verify whether +all the requirements for a successful probing are satisfied. This can include a +check for a master clock availability. If any of the conditions aren't satisfied +the driver might decide to return ``-EPROBE_DEFER`` to request further reprobing +attempts. Once all conditions are met the subdevice shall be registered using +the :c:func:`v4l2_async_register_subdev` function. Unregistration is +performed using the :c:func:`v4l2_async_unregister_subdev` call. Subdevices +registered this way are stored in a global list of subdevices, ready to be +picked up by bridge drivers. + +Bridge drivers in turn have to register a notifier object. This is +performed using the :c:func:`v4l2_async_notifier_register` call. To +unregister the notifier the driver has to call +:c:func:`v4l2_async_notifier_unregister`. The former of the two functions +takes two arguments: a pointer to struct :c:type:`v4l2_device` and a +pointer to struct :c:type:`v4l2_async_notifier`. + +Before registering the notifier, bridge drivers must do two things: +first, the notifier must be initialized using the +:c:func:`v4l2_async_notifier_init`. Second, bridge drivers can then +begin to form a list of subdevice descriptors that the bridge device +needs for its operation. Subdevice descriptors are added to the notifier +using the :c:func:`v4l2_async_notifier_add_subdev` call. This function +takes two arguments: a pointer to struct :c:type:`v4l2_async_notifier`, +and a pointer to the subdevice descripter, which is of type struct +:c:type:`v4l2_async_subdev`. + +The V4L2 core will then use these descriptors to match asynchronously +registered subdevices to them. If a match is detected the ``.bound()`` +notifier callback is called. After all subdevices have been located the +.complete() callback is called. When a subdevice is removed from the +system the .unbind() method is called. All three callbacks are optional. + +Calling subdev operations +~~~~~~~~~~~~~~~~~~~~~~~~~ + +The advantage of using :c:type:`v4l2_subdev` is that it is a generic struct and +does not contain any knowledge about the underlying hardware. So a driver might +contain several subdevs that use an I2C bus, but also a subdev that is +controlled through GPIO pins. This distinction is only relevant when setting +up the device, but once the subdev is registered it is completely transparent. + +Once te subdev has been registered you can call an ops function either +directly: .. code-block:: c @@ -191,7 +238,7 @@ but it is better and easier to use this macro: err = v4l2_subdev_call(sd, core, g_std, &norm); -The macro will to the right ``NULL`` pointer checks and returns ``-ENODEV`` +The macro will do the right ``NULL`` pointer checks and returns ``-ENODEV`` if :c:type:`sd <v4l2_subdev>` is ``NULL``, ``-ENOIOCTLCMD`` if either :c:type:`sd <v4l2_subdev>`->core or :c:type:`sd <v4l2_subdev>`->core->g_std is ``NULL``, or the actual result of the :c:type:`sd <v4l2_subdev>`->ops->core->g_std ops. @@ -232,46 +279,6 @@ it can call ``v4l2_subdev_notify(sd, notification, arg)``. This macro checks whether there is a ``notify()`` callback defined and returns ``-ENODEV`` if not. Otherwise the result of the ``notify()`` call is returned. -The advantage of using :c:type:`v4l2_subdev` is that it is a generic struct and -does not contain any knowledge about the underlying hardware. So a driver might -contain several subdevs that use an I2C bus, but also a subdev that is -controlled through GPIO pins. This distinction is only relevant when setting -up the device, but once the subdev is registered it is completely transparent. - -In the asynchronous case subdevice probing can be invoked independently of the -bridge driver availability. The subdevice driver then has to verify whether all -the requirements for a successful probing are satisfied. This can include a -check for a master clock availability. If any of the conditions aren't satisfied -the driver might decide to return ``-EPROBE_DEFER`` to request further reprobing -attempts. Once all conditions are met the subdevice shall be registered using -the :c:func:`v4l2_async_register_subdev` function. Unregistration is -performed using the :c:func:`v4l2_async_unregister_subdev` call. Subdevices -registered this way are stored in a global list of subdevices, ready to be -picked up by bridge drivers. - -Bridge drivers in turn have to register a notifier object. This is -performed using the :c:func:`v4l2_async_notifier_register` call. To -unregister the notifier the driver has to call -:c:func:`v4l2_async_notifier_unregister`. The former of the two functions -takes two arguments: a pointer to struct :c:type:`v4l2_device` and a -pointer to struct :c:type:`v4l2_async_notifier`. - -Before registering the notifier, bridge drivers must do two things: -first, the notifier must be initialized using the -:c:func:`v4l2_async_notifier_init`. Second, bridge drivers can then -begin to form a list of subdevice descriptors that the bridge device -needs for its operation. Subdevice descriptors are added to the notifier -using the :c:func:`v4l2_async_notifier_add_subdev` call. This function -takes two arguments: a pointer to struct :c:type:`v4l2_async_notifier`, -and a pointer to the subdevice descripter, which is of type struct -:c:type:`v4l2_async_subdev`. - -The V4L2 core will then use these descriptors to match asynchronously -registered subdevices to them. If a match is detected the ``.bound()`` -notifier callback is called. After all subdevices have been located the -.complete() callback is called. When a subdevice is removed from the -system the .unbind() method is called. All three callbacks are optional. - V4L2 sub-device userspace API ----------------------------- @@ -488,5 +495,3 @@ V4L2 sub-device functions and data structures --------------------------------------------- .. kernel-doc:: include/media/v4l2-subdev.h - -.. kernel-doc:: include/media/v4l2-async.h diff --git a/Documentation/driver-api/mei/mei.rst b/Documentation/driver-api/mei/mei.rst index c800d8e5f422..4f2ced4ccdc6 100644 --- a/Documentation/driver-api/mei/mei.rst +++ b/Documentation/driver-api/mei/mei.rst @@ -38,10 +38,15 @@ Because some of the Intel ME features can change the system configuration, the driver by default allows only a privileged user to access it. -The session is terminated calling :c:func:`close(int fd)`. +The session is terminated calling :c:expr:`close(fd)`. A code snippet for an application communicating with Intel AMTHI client: +In order to support virtualization or sandboxing a trusted supervisor +can use :c:macro:`MEI_CONNECT_CLIENT_IOCTL_VTAG` to create +virtual channels with an Intel ME feature. Not all features support +virtual channels such client with answer EOPNOTSUPP. + .. code-block:: C struct mei_connect_client_data data; @@ -110,6 +115,38 @@ Connect to firmware Feature/Client. data that can be sent or received. (e.g. if MTU=2K, can send requests up to bytes 2k and received responses up to 2k bytes). +IOCTL_MEI_CONNECT_CLIENT_VTAG: +------------------------------ + +.. code-block:: none + + Usage: + + struct mei_connect_client_data_vtag client_data_vtag; + + ioctl(fd, IOCTL_MEI_CONNECT_CLIENT_VTAG, &client_data_vtag); + + Inputs: + + struct mei_connect_client_data_vtag - contain the following + Input field: + + in_client_uuid - GUID of the FW Feature that needs + to connect to. + vtag - virtual tag [1, 255] + + Outputs: + out_client_properties - Client Properties: MTU and Protocol Version. + + Error returns: + + ENOTTY No such client (i.e. wrong GUID) or connection is not allowed. + EINVAL Wrong IOCTL Number or tag == 0 + ENODEV Device or Connection is not initialized or ready. + ENOMEM Unable to allocate memory to client internal data. + EFAULT Fatal Error (e.g. Unable to access user input data) + EBUSY Connection Already Open + EOPNOTSUPP Vtag is not supported IOCTL_MEI_NOTIFY_SET --------------------- diff --git a/Documentation/driver-api/nvdimm/index.rst b/Documentation/driver-api/nvdimm/index.rst index a4f8f98aeb94..5863bd04f056 100644 --- a/Documentation/driver-api/nvdimm/index.rst +++ b/Documentation/driver-api/nvdimm/index.rst @@ -10,3 +10,4 @@ Non-Volatile Memory Device (NVDIMM) nvdimm btt security + firmware-activate diff --git a/Documentation/driver-api/pm/cpuidle.rst b/Documentation/driver-api/pm/cpuidle.rst index 3588bf078566..d477208604b8 100644 --- a/Documentation/driver-api/pm/cpuidle.rst +++ b/Documentation/driver-api/pm/cpuidle.rst @@ -1,11 +1,6 @@ .. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> -.. |struct cpuidle_governor| replace:: :c:type:`struct cpuidle_governor <cpuidle_governor>` -.. |struct cpuidle_device| replace:: :c:type:`struct cpuidle_device <cpuidle_device>` -.. |struct cpuidle_driver| replace:: :c:type:`struct cpuidle_driver <cpuidle_driver>` -.. |struct cpuidle_state| replace:: :c:type:`struct cpuidle_state <cpuidle_state>` - ======================== CPU Idle Time Management ======================== @@ -54,7 +49,7 @@ platform that the Linux kernel can run on. For this reason, data structures operated on by them cannot depend on any hardware architecture or platform design details as well. -The governor itself is represented by a |struct cpuidle_governor| object +The governor itself is represented by a struct cpuidle_governor object containing four callback pointers, :c:member:`enable`, :c:member:`disable`, :c:member:`select`, :c:member:`reflect`, a :c:member:`rating` field described below, and a name (string) used for identifying it. @@ -83,11 +78,11 @@ callbacks: int (*enable) (struct cpuidle_driver *drv, struct cpuidle_device *dev); The role of this callback is to prepare the governor for handling the - (logical) CPU represented by the |struct cpuidle_device| object pointed - to by the ``dev`` argument. The |struct cpuidle_driver| object pointed + (logical) CPU represented by the struct cpuidle_device object pointed + to by the ``dev`` argument. The struct cpuidle_driver object pointed to by the ``drv`` argument represents the ``CPUIdle`` driver to be used with that CPU (among other things, it should contain the list of - |struct cpuidle_state| objects representing idle states that the + struct cpuidle_state objects representing idle states that the processor holding the given CPU can be asked to enter). It may fail, in which case it is expected to return a negative error @@ -102,7 +97,7 @@ callbacks: void (*disable) (struct cpuidle_driver *drv, struct cpuidle_device *dev); Called to make the governor stop handling the (logical) CPU represented - by the |struct cpuidle_device| object pointed to by the ``dev`` + by the struct cpuidle_device object pointed to by the ``dev`` argument. It is expected to reverse any changes made by the ``->enable()`` @@ -116,12 +111,12 @@ callbacks: bool *stop_tick); Called to select an idle state for the processor holding the (logical) - CPU represented by the |struct cpuidle_device| object pointed to by the + CPU represented by the struct cpuidle_device object pointed to by the ``dev`` argument. The list of idle states to take into consideration is represented by the - :c:member:`states` array of |struct cpuidle_state| objects held by the - |struct cpuidle_driver| object pointed to by the ``drv`` argument (which + :c:member:`states` array of struct cpuidle_state objects held by the + struct cpuidle_driver object pointed to by the ``drv`` argument (which represents the ``CPUIdle`` driver to be used with the CPU at hand). The value returned by this callback is interpreted as an index into that array (unless it is a negative error code). @@ -136,7 +131,7 @@ callbacks: asking the processor to enter the idle state). This callback is mandatory (i.e. the :c:member:`select` callback pointer - in |struct cpuidle_governor| must not be ``NULL`` for the registration + in struct cpuidle_governor must not be ``NULL`` for the registration of the governor to succeed). :c:member:`reflect` @@ -167,21 +162,21 @@ CPU idle time management (``CPUIdle``) drivers provide an interface between the other parts of ``CPUIdle`` and the hardware. First of all, a ``CPUIdle`` driver has to populate the :c:member:`states` array -of |struct cpuidle_state| objects included in the |struct cpuidle_driver| object +of struct cpuidle_state objects included in the struct cpuidle_driver object representing it. Going forward this array will represent the list of available idle states that the processor hardware can be asked to enter shared by all of the logical CPUs handled by the given driver. The entries in the :c:member:`states` array are expected to be sorted by the -value of the :c:member:`target_residency` field in |struct cpuidle_state| in +value of the :c:member:`target_residency` field in struct cpuidle_state in the ascending order (that is, index 0 should correspond to the idle state with the minimum value of :c:member:`target_residency`). [Since the :c:member:`target_residency` value is expected to reflect the "depth" of the -idle state represented by the |struct cpuidle_state| object holding it, this +idle state represented by the struct cpuidle_state object holding it, this sorting order should be the same as the ascending sorting order by the idle state "depth".] -Three fields in |struct cpuidle_state| are used by the existing ``CPUIdle`` +Three fields in struct cpuidle_state are used by the existing ``CPUIdle`` governors for computations related to idle state selection: :c:member:`target_residency` @@ -203,7 +198,7 @@ governors for computations related to idle state selection: any idle state at all. [There are other flags used by the ``CPUIdle`` core in special situations.] -The :c:member:`enter` callback pointer in |struct cpuidle_state|, which must not +The :c:member:`enter` callback pointer in struct cpuidle_state, which must not be ``NULL``, points to the routine to execute in order to ask the processor to enter this particular idle state: @@ -212,14 +207,14 @@ enter this particular idle state: void (*enter) (struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); -The first two arguments of it point to the |struct cpuidle_device| object +The first two arguments of it point to the struct cpuidle_device object representing the logical CPU running this callback and the -|struct cpuidle_driver| object representing the driver itself, respectively, -and the last one is an index of the |struct cpuidle_state| entry in the driver's +struct cpuidle_driver object representing the driver itself, respectively, +and the last one is an index of the struct cpuidle_state entry in the driver's :c:member:`states` array representing the idle state to ask the processor to enter. -The analogous ``->enter_s2idle()`` callback in |struct cpuidle_state| is used +The analogous ``->enter_s2idle()`` callback in struct cpuidle_state is used only for implementing the suspend-to-idle system-wide power management feature. The difference between in and ``->enter()`` is that it must not re-enable interrupts at any point (even temporarily) or attempt to change the states of @@ -227,48 +222,48 @@ clock event devices, which the ``->enter()`` callback may do sometimes. Once the :c:member:`states` array has been populated, the number of valid entries in it has to be stored in the :c:member:`state_count` field of the -|struct cpuidle_driver| object representing the driver. Moreover, if any +struct cpuidle_driver object representing the driver. Moreover, if any entries in the :c:member:`states` array represent "coupled" idle states (that is, idle states that can only be asked for if multiple related logical CPUs are -idle), the :c:member:`safe_state_index` field in |struct cpuidle_driver| needs +idle), the :c:member:`safe_state_index` field in struct cpuidle_driver needs to be the index of an idle state that is not "coupled" (that is, one that can be asked for if only one logical CPU is idle). In addition to that, if the given ``CPUIdle`` driver is only going to handle a subset of logical CPUs in the system, the :c:member:`cpumask` field in its -|struct cpuidle_driver| object must point to the set (mask) of CPUs that will be +struct cpuidle_driver object must point to the set (mask) of CPUs that will be handled by it. A ``CPUIdle`` driver can only be used after it has been registered. If there are no "coupled" idle state entries in the driver's :c:member:`states` array, -that can be accomplished by passing the driver's |struct cpuidle_driver| object +that can be accomplished by passing the driver's struct cpuidle_driver object to :c:func:`cpuidle_register_driver()`. Otherwise, :c:func:`cpuidle_register()` should be used for this purpose. -However, it also is necessary to register |struct cpuidle_device| objects for +However, it also is necessary to register struct cpuidle_device objects for all of the logical CPUs to be handled by the given ``CPUIdle`` driver with the help of :c:func:`cpuidle_register_device()` after the driver has been registered and :c:func:`cpuidle_register_driver()`, unlike :c:func:`cpuidle_register()`, does not do that automatically. For this reason, the drivers that use :c:func:`cpuidle_register_driver()` to register themselves must also take care -of registering the |struct cpuidle_device| objects as needed, so it is generally +of registering the struct cpuidle_device objects as needed, so it is generally recommended to use :c:func:`cpuidle_register()` for ``CPUIdle`` driver registration in all cases. -The registration of a |struct cpuidle_device| object causes the ``CPUIdle`` +The registration of a struct cpuidle_device object causes the ``CPUIdle`` ``sysfs`` interface to be created and the governor's ``->enable()`` callback to be invoked for the logical CPU represented by it, so it must take place after registering the driver that will handle the CPU in question. -``CPUIdle`` drivers and |struct cpuidle_device| objects can be unregistered +``CPUIdle`` drivers and struct cpuidle_device objects can be unregistered when they are not necessary any more which allows some resources associated with them to be released. Due to dependencies between them, all of the -|struct cpuidle_device| objects representing CPUs handled by the given +struct cpuidle_device objects representing CPUs handled by the given ``CPUIdle`` driver must be unregistered, with the help of :c:func:`cpuidle_unregister_device()`, before calling :c:func:`cpuidle_unregister_driver()` to unregister the driver. Alternatively, :c:func:`cpuidle_unregister()` can be called to unregister a ``CPUIdle`` driver -along with all of the |struct cpuidle_device| objects representing CPUs handled +along with all of the struct cpuidle_device objects representing CPUs handled by it. ``CPUIdle`` drivers can respond to runtime system configuration changes that @@ -277,8 +272,8 @@ happen, for example, when the system's power source is switched from AC to battery or the other way around). Upon a notification of such a change, a ``CPUIdle`` driver is expected to call :c:func:`cpuidle_pause_and_lock()` to turn ``CPUIdle`` off temporarily and then :c:func:`cpuidle_disable_device()` for -all of the |struct cpuidle_device| objects representing CPUs affected by that +all of the struct cpuidle_device objects representing CPUs affected by that change. Next, it can update its :c:member:`states` array in accordance with the new configuration of the system, call :c:func:`cpuidle_enable_device()` for -all of the relevant |struct cpuidle_device| objects and invoke +all of the relevant struct cpuidle_device objects and invoke :c:func:`cpuidle_resume_and_unlock()` to allow ``CPUIdle`` to be used again. diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst index 946ad0b94e31..6b3bfd29fd84 100644 --- a/Documentation/driver-api/pm/devices.rst +++ b/Documentation/driver-api/pm/devices.rst @@ -1,14 +1,6 @@ .. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> -.. |struct dev_pm_ops| replace:: :c:type:`struct dev_pm_ops <dev_pm_ops>` -.. |struct dev_pm_domain| replace:: :c:type:`struct dev_pm_domain <dev_pm_domain>` -.. |struct bus_type| replace:: :c:type:`struct bus_type <bus_type>` -.. |struct device_type| replace:: :c:type:`struct device_type <device_type>` -.. |struct class| replace:: :c:type:`struct class <class>` -.. |struct wakeup_source| replace:: :c:type:`struct wakeup_source <wakeup_source>` -.. |struct device| replace:: :c:type:`struct device <device>` - .. _driverapi_pm_devices: ============================== @@ -107,7 +99,7 @@ Device Power Management Operations Device power management operations, at the subsystem level as well as at the device driver level, are implemented by defining and populating objects of type -|struct dev_pm_ops| defined in :file:`include/linux/pm.h`. The roles of the +struct dev_pm_ops defined in :file:`include/linux/pm.h`. The roles of the methods included in it will be explained in what follows. For now, it should be sufficient to remember that the last three methods are specific to runtime power management while the remaining ones are used during system-wide power @@ -115,7 +107,7 @@ transitions. There also is a deprecated "old" or "legacy" interface for power management operations available at least for some subsystems. This approach does not use -|struct dev_pm_ops| objects and it is suitable only for implementing system +struct dev_pm_ops objects and it is suitable only for implementing system sleep power management methods in a limited way. Therefore it is not described in this document, so please refer directly to the source code for more information about it. @@ -125,9 +117,9 @@ Subsystem-Level Methods ----------------------- The core methods to suspend and resume devices reside in -|struct dev_pm_ops| pointed to by the :c:member:`ops` member of -|struct dev_pm_domain|, or by the :c:member:`pm` member of |struct bus_type|, -|struct device_type| and |struct class|. They are mostly of interest to the +struct dev_pm_ops pointed to by the :c:member:`ops` member of +struct dev_pm_domain, or by the :c:member:`pm` member of struct bus_type, +struct device_type and struct class. They are mostly of interest to the people writing infrastructure for platforms and buses, like PCI or USB, or device type and device class drivers. They also are relevant to the writers of device drivers whose subsystems (PM domains, device types, device classes and @@ -156,7 +148,7 @@ The :c:member:`power.can_wakeup` flag just records whether the device (and its driver) can physically support wakeup events. The :c:func:`device_set_wakeup_capable()` routine affects this flag. The :c:member:`power.wakeup` field is a pointer to an object of type -|struct wakeup_source| used for controlling whether or not the device should use +struct wakeup_source used for controlling whether or not the device should use its system wakeup mechanism and for notifying the PM core of system wakeup events signaled by the device. This object is only present for wakeup-capable devices (i.e. devices whose :c:member:`can_wakeup` flags are set) and is created @@ -418,7 +410,7 @@ On many platforms they will gate off one or more clock sources; sometimes they will also switch off power supplies or reduce voltages. [Drivers supporting runtime PM may already have performed some or all of these steps.] -If :c:func:`device_may_wakeup(dev)` returns ``true``, the device should be +If :c:func:`device_may_wakeup()` returns ``true``, the device should be prepared for generating hardware wakeup signals to trigger a system wakeup event when the system is in the sleep state. For example, :c:func:`enable_irq_wake()` might identify GPIO signals hooked up to a switch or other external hardware, @@ -713,8 +705,8 @@ nested inside another power domain. The nested domain is referred to as the sub-domain of the parent domain. Support for power domains is provided through the :c:member:`pm_domain` field of -|struct device|. This field is a pointer to an object of type -|struct dev_pm_domain|, defined in :file:`include/linux/pm.h`, providing a set +struct device. This field is a pointer to an object of type +struct dev_pm_domain, defined in :file:`include/linux/pm.h`, providing a set of power management callbacks analogous to the subsystem-level and device driver callbacks that are executed for the given device during all power transitions, instead of the respective subsystem-level callbacks. Specifically, if a diff --git a/Documentation/driver-api/regulator.rst b/Documentation/driver-api/regulator.rst index 520da0a5251d..b43c78eb24d8 100644 --- a/Documentation/driver-api/regulator.rst +++ b/Documentation/driver-api/regulator.rst @@ -116,7 +116,7 @@ core, providing operations structures to the core. A notifier interface allows error conditions to be reported to the core. Registration should be triggered by explicit setup done by the platform, -supplying a struct :c:type:`regulator_init_data` for the regulator +supplying a struct regulator_init_data for the regulator containing constraint and supply information. Machine interface @@ -144,7 +144,7 @@ a given system, for example supporting higher supply voltages than the consumers are rated for. This is done at driver registration time` by providing a -struct :c:type:`regulation_constraints`. +struct regulation_constraints. The constraints may also specify an initial configuration for the regulator in the constraints, which is particularly useful for use with diff --git a/Documentation/driver-api/sound.rst b/Documentation/driver-api/sound.rst deleted file mode 100644 index afef6eabc073..000000000000 --- a/Documentation/driver-api/sound.rst +++ /dev/null @@ -1,54 +0,0 @@ -Sound Devices -============= - -.. kernel-doc:: include/sound/core.h - :internal: - -.. kernel-doc:: sound/sound_core.c - :export: - -.. kernel-doc:: include/sound/pcm.h - :internal: - -.. kernel-doc:: sound/core/pcm.c - :export: - -.. kernel-doc:: sound/core/device.c - :export: - -.. kernel-doc:: sound/core/info.c - :export: - -.. kernel-doc:: sound/core/rawmidi.c - :export: - -.. kernel-doc:: sound/core/sound.c - :export: - -.. kernel-doc:: sound/core/memory.c - :export: - -.. kernel-doc:: sound/core/pcm_memory.c - :export: - -.. kernel-doc:: sound/core/init.c - :export: - -.. kernel-doc:: sound/core/isadma.c - :export: - -.. kernel-doc:: sound/core/control.c - :export: - -.. kernel-doc:: sound/core/pcm_lib.c - :export: - -.. kernel-doc:: sound/core/hwdep.c - :export: - -.. kernel-doc:: sound/core/pcm_native.c - :export: - -.. kernel-doc:: sound/core/memalloc.c - :export: - diff --git a/Documentation/driver-api/soundwire/stream.rst b/Documentation/driver-api/soundwire/stream.rst index 8858cea7bfe0..b432a2de45d3 100644 --- a/Documentation/driver-api/soundwire/stream.rst +++ b/Documentation/driver-api/soundwire/stream.rst @@ -518,10 +518,10 @@ typically called during a dailink .shutdown() callback, which clears the stream pointer for all DAIS connected to a stream and releases the memory allocated for the stream. - Not Supported +Not Supported ============= 1. A single port with multiple channels supported cannot be used between two -streams or across stream. For example a port with 4 channels cannot be used -to handle 2 independent stereo streams even though it's possible in theory -in SoundWire. + streams or across stream. For example a port with 4 channels cannot be used + to handle 2 independent stereo streams even though it's possible in theory + in SoundWire. diff --git a/Documentation/driver-api/target.rst b/Documentation/driver-api/target.rst index 620ec6173a93..c70ca25171c0 100644 --- a/Documentation/driver-api/target.rst +++ b/Documentation/driver-api/target.rst @@ -41,18 +41,6 @@ iSCSI boot information .. kernel-doc:: drivers/scsi/iscsi_boot_sysfs.c :export: - -iSCSI transport class -===================== - -The file drivers/scsi/scsi_transport_iscsi.c defines transport -attributes for the iSCSI class, which sends SCSI packets over TCP/IP -connections. - -.. kernel-doc:: drivers/scsi/scsi_transport_iscsi.c - :export: - - iSCSI TCP interfaces ==================== diff --git a/Documentation/driver-api/usb/URB.rst b/Documentation/driver-api/usb/URB.rst index 1e4abc896a0d..a182c0f5e38a 100644 --- a/Documentation/driver-api/usb/URB.rst +++ b/Documentation/driver-api/usb/URB.rst @@ -47,7 +47,7 @@ called USB Request Block, or URB for short. The URB structure ================= -Some of the fields in struct :c:type:`urb` are:: +Some of the fields in struct urb are:: struct urb { diff --git a/Documentation/driver-api/usb/gadget.rst b/Documentation/driver-api/usb/gadget.rst index 3e8a3809c0b8..09396edd6131 100644 --- a/Documentation/driver-api/usb/gadget.rst +++ b/Documentation/driver-api/usb/gadget.rst @@ -176,9 +176,9 @@ Kernel Mode Gadget API Gadget drivers declare themselves through a struct :c:type:`usb_gadget_driver`, which is responsible for most parts of enumeration -for a struct :c:type:`usb_gadget`. The response to a set_configuration usually -involves enabling one or more of the struct :c:type:`usb_ep` objects exposed by -the gadget, and submitting one or more struct :c:type:`usb_request` buffers to +for a struct usb_gadget. The response to a set_configuration usually +involves enabling one or more of the struct usb_ep objects exposed by +the gadget, and submitting one or more struct usb_request buffers to transfer data. Understand those four data types, and their operations, and you will understand how this API works. @@ -339,8 +339,8 @@ multi-configuration devices (also more than one function, but not necessarily sharing a given configuration). There is however an optional framework which makes it easier to reuse and combine functions. -Devices using this framework provide a struct :c:type:`usb_composite_driver`, -which in turn provides one or more struct :c:type:`usb_configuration` +Devices using this framework provide a struct usb_composite_driver, +which in turn provides one or more struct usb_configuration instances. Each such configuration includes at least one struct :c:type:`usb_function`, which packages a user visible role such as "network link" or "mass storage device". Management functions may also exist, diff --git a/Documentation/driver-api/usb/hotplug.rst b/Documentation/driver-api/usb/hotplug.rst index 79663e653ca1..c1e13107c50e 100644 --- a/Documentation/driver-api/usb/hotplug.rst +++ b/Documentation/driver-api/usb/hotplug.rst @@ -122,7 +122,7 @@ and their quirks, might have a MODULE_DEVICE_TABLE like this:: Most USB device drivers should pass these tables to the USB subsystem as well as to the module management subsystem. Not all, though: some driver frameworks connect using interfaces layered over USB, and so they won't -need such a struct :c:type:`usb_driver`. +need such a struct usb_driver. Drivers that connect directly to the USB subsystem should be declared something like this:: diff --git a/Documentation/driver-api/usb/typec_bus.rst b/Documentation/driver-api/usb/typec_bus.rst index 03dfa9c018b7..21c890ae17e5 100644 --- a/Documentation/driver-api/usb/typec_bus.rst +++ b/Documentation/driver-api/usb/typec_bus.rst @@ -91,10 +91,16 @@ their control. Driver API ---------- +Alternate mode structs +~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: include/linux/usb/typec_altmode.h + :functions: typec_altmode_driver typec_altmode_ops + Alternate mode driver registering/unregistering ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -.. kernel-doc:: drivers/usb/typec/bus.c +.. kernel-doc:: include/linux/usb/typec_altmode.h :functions: typec_altmode_register_driver typec_altmode_unregister_driver Alternate mode driver operations diff --git a/Documentation/fault-injection/fault-injection.rst b/Documentation/fault-injection/fault-injection.rst index f850ad018b70..31ecfe44e5b4 100644 --- a/Documentation/fault-injection/fault-injection.rst +++ b/Documentation/fault-injection/fault-injection.rst @@ -16,6 +16,10 @@ Available fault injection capabilities injects page allocation failures. (alloc_pages(), get_free_pages(), ...) +- fail_usercopy + + injects failures in user memory access functions. (copy_from_user(), get_user(), ...) + - fail_futex injects futex deadlock and uaddr fault errors. @@ -177,6 +181,7 @@ use the boot option:: failslab= fail_page_alloc= + fail_usercopy= fail_make_request= fail_futex= mmc_core.fail_request=<interval>,<probability>,<space>,<times> @@ -222,7 +227,7 @@ How to add new fault injection capability - debugfs entries - failslab, fail_page_alloc, and fail_make_request use this way. + failslab, fail_page_alloc, fail_usercopy, and fail_make_request use this way. Helper functions: fault_create_debugfs_attr(name, parent, attr); diff --git a/Documentation/fault-injection/provoke-crashes.rst b/Documentation/fault-injection/provoke-crashes.rst index 9279a3e12278..a20ba5d93932 100644 --- a/Documentation/fault-injection/provoke-crashes.rst +++ b/Documentation/fault-injection/provoke-crashes.rst @@ -1,16 +1,19 @@ -=============== -Provoke crashes -=============== +.. SPDX-License-Identifier: GPL-2.0 -The lkdtm module provides an interface to crash or injure the kernel at -predefined crashpoints to evaluate the reliability of crash dumps obtained -using different dumping solutions. The module uses KPROBEs to instrument -crashing points, but can also crash the kernel directly without KRPOBE -support. +============================================================ +Provoking crashes with Linux Kernel Dump Test Module (LKDTM) +============================================================ +The lkdtm module provides an interface to disrupt (and usually crash) +the kernel at predefined code locations to evaluate the reliability of +the kernel's exception handling and to test crash dumps obtained using +different dumping solutions. The module uses KPROBEs to instrument the +trigger location, but can also trigger the kernel directly without KPROBE +support via debugfs. -You can provide the way either through module arguments when inserting -the module, or through a debugfs interface. +You can select the location of the trigger ("crash point name") and the +type of action ("crash point type") either through module arguments when +inserting the module, or through the debugfs interface. Usage:: @@ -18,31 +21,38 @@ Usage:: [cpoint_count={>0}] recur_count - Recursion level for the stack overflow test. Default is 10. + Recursion level for the stack overflow test. By default this is + dynamically calculated based on kernel configuration, with the + goal of being just large enough to exhaust the kernel stack. The + value can be seen at `/sys/module/lkdtm/parameters/recur_count`. cpoint_name - Crash point where the kernel is to be crashed. It can be + Where in the kernel to trigger the action. It can be one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY, FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD, - IDE_CORE_CP, DIRECT + IDE_CORE_CP, or DIRECT cpoint_type Indicates the action to be taken on hitting the crash point. - It can be one of PANIC, BUG, EXCEPTION, LOOP, OVERFLOW, - CORRUPT_STACK, UNALIGNED_LOAD_STORE_WRITE, OVERWRITE_ALLOCATION, - WRITE_AFTER_FREE, + These are numerous, and best queried directly from debugfs. Some + of the common ones are PANIC, BUG, EXCEPTION, LOOP, and OVERFLOW. + See the contents of `/sys/kernel/debug/provoke-crash/DIRECT` for + a complete list. cpoint_count Indicates the number of times the crash point is to be hit - to trigger an action. The default is 10. + before triggering the action. The default is 10 (except for + DIRECT, which always fires immediately). You can also induce failures by mounting debugfs and writing the type to -<mountpoint>/provoke-crash/<crashpoint>. E.g.:: +<debugfs>/provoke-crash/<crashpoint>. E.g.:: - mount -t debugfs debugfs /mnt - echo EXCEPTION > /mnt/provoke-crash/INT_HARDWARE_ENTRY + mount -t debugfs debugfs /sys/kernel/debug + echo EXCEPTION > /sys/kernel/debug/provoke-crash/INT_HARDWARE_ENTRY +The special file `DIRECT` will induce the action directly without KPROBE +instrumentation. This mode is the only one available when the module is +built for a kernel without KPROBEs support:: -A special file is `DIRECT` which will induce the crash directly without -KPROBE instrumentation. This mode is the only one available when the module -is built on a kernel without KPROBEs support. + # Instead of having a BUG kill your shell, have it kill "cat": + cat <(echo WRITE_RO) >/sys/kernel/debug/provoke-crash/DIRECT diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst index e57a3d1d085a..57f66de2f7e1 100644 --- a/Documentation/fb/fbcon.rst +++ b/Documentation/fb/fbcon.rst @@ -20,8 +20,8 @@ A. Configuration ================ The framebuffer console can be enabled by using your favorite kernel -configuration tool. It is under Device Drivers->Graphics Support->Frame -buffer Devices->Console display driver support->Framebuffer Console Support. +configuration tool. It is under Device Drivers->Graphics Support-> +Console display driver support->Framebuffer Console Support. Select 'y' to compile support statically or 'm' for module support. The module will be fbcon. @@ -81,21 +81,14 @@ C. Boot options 1. fbcon=font:<name> Select the initial font to use. The value 'name' can be any of the - compiled-in fonts: 10x18, 6x10, 7x14, Acorn8x8, MINI4x6, + compiled-in fonts: 10x18, 6x10, 6x8, 7x14, Acorn8x8, MINI4x6, PEARL8x8, ProFont6x11, SUN12x22, SUN8x16, TER16x32, VGA8x16, VGA8x8. Note, not all drivers can handle font with widths not divisible by 8, such as vga16fb. -2. fbcon=scrollback:<value>[k] - The scrollback buffer is memory that is used to preserve display - contents that has already scrolled past your view. This is accessed - by using the Shift-PageUp key combination. The value 'value' is any - integer. It defaults to 32KB. The 'k' suffix is optional, and will - multiply the 'value' by 1024. - -3. fbcon=map:<0123> +2. fbcon=map:<0123> This is an interesting option. It tells which driver gets mapped to which console. The value '0123' is a sequence that gets repeated until @@ -116,7 +109,7 @@ C. Boot options Later on, when you want to map the console the to the framebuffer device, you can use the con2fbmap utility. -4. fbcon=vc:<n1>-<n2> +3. fbcon=vc:<n1>-<n2> This option tells fbcon to take over only a range of consoles as specified by the values 'n1' and 'n2'. The rest of the consoles @@ -127,7 +120,7 @@ C. Boot options is typically located on the same video card. Thus, the consoles that are controlled by the VGA console will be garbled. -5. fbcon=rotate:<n> +4. fbcon=rotate:<n> This option changes the orientation angle of the console display. The value 'n' accepts the following: @@ -152,21 +145,21 @@ C. Boot options Actually, the underlying fb driver is totally ignorant of console rotation. -6. fbcon=margin:<color> +5. fbcon=margin:<color> This option specifies the color of the margins. The margins are the leftover area at the right and the bottom of the screen that are not used by text. By default, this area will be black. The 'color' value is an integer number that depends on the framebuffer driver being used. -7. fbcon=nodefer +6. fbcon=nodefer If the kernel is compiled with deferred fbcon takeover support, normally the framebuffer contents, left in place by the firmware/bootloader, will be preserved until there actually is some text is output to the console. This option causes fbcon to bind immediately to the fbdev device. -8. fbcon=logo-pos:<location> +7. fbcon=logo-pos:<location> The only possible 'location' is 'center' (without quotes), and when given, the bootup logo is moved from the default top-left corner @@ -174,7 +167,7 @@ C. Boot options displayed due to multiple CPUs, the collected line of logos is moved as a whole. -9. fbcon=logo-count:<n> +8. fbcon=logo-count:<n> The value 'n' overrides the number of bootup logos. 0 disables the logo, and -1 gives the default which is the number of online CPUs. diff --git a/Documentation/fb/matroxfb.rst b/Documentation/fb/matroxfb.rst index f1859d98606e..6158c49c8571 100644 --- a/Documentation/fb/matroxfb.rst +++ b/Documentation/fb/matroxfb.rst @@ -317,8 +317,6 @@ Currently there are following known bugs: - interlaced text mode is not supported; it looks like hardware limitation, but I'm not sure. - Gxx0 SGRAM/SDRAM is not autodetected. - - If you are using more than one framebuffer device, you must boot kernel - with 'video=scrollback:0'. - maybe more... And following misfeatures: diff --git a/Documentation/fb/sstfb.rst b/Documentation/fb/sstfb.rst index 8e8c1b940359..42466ff49c58 100644 --- a/Documentation/fb/sstfb.rst +++ b/Documentation/fb/sstfb.rst @@ -185,9 +185,6 @@ Bugs contact me. - The 24/32 is not likely to work anytime soon, knowing that the hardware does ... unusual things in 24/32 bpp. -- When used with another video board, current limitations of the linux - console subsystem can cause some troubles, specifically, you should - disable software scrollback, as it can oops badly ... Todo ==== diff --git a/Documentation/fb/vesafb.rst b/Documentation/fb/vesafb.rst index 6821c87b7893..f890a4f5623b 100644 --- a/Documentation/fb/vesafb.rst +++ b/Documentation/fb/vesafb.rst @@ -135,8 +135,6 @@ ypan enable display panning using the VESA protected mode * scrolling (fullscreen) is fast, because there is no need to copy around data. - * You'll get scrollback (the Shift-PgUp thing), - the video memory can be used as scrollback buffer kontra: diff --git a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt index 53da483c8326..1c49723e7534 100644 --- a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt +++ b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt @@ -22,7 +22,7 @@ | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | - | powerpc: | ok | + | powerpc: | TODO | | riscv: | ok | | s390: | ok | | sh: | TODO | diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt index 1cb7406cd858..b5fb37c28cc6 100644 --- a/Documentation/features/vm/ioremap_prot/arch-support.txt +++ b/Documentation/features/vm/ioremap_prot/arch-support.txt @@ -24,7 +24,7 @@ | parisc: | TODO | | powerpc: | ok | | riscv: | TODO | - | s390: | TODO | + | s390: | ok | | sh: | ok | | sparc: | TODO | | um: | TODO | diff --git a/Documentation/filesystems/affs.rst b/Documentation/filesystems/affs.rst index 7f1a40dce6d3..5776cbd5fa53 100644 --- a/Documentation/filesystems/affs.rst +++ b/Documentation/filesystems/affs.rst @@ -110,13 +110,15 @@ The Amiga protection flags RWEDRWEDHSPARWED are handled as follows: - R maps to r for user, group and others. On directories, R implies x. - - If both W and D are allowed, w will be set. + - W maps to w. - E maps to x. - - H and P are always retained and ignored under Linux. + - D is ignored. - - A is always reset when a file is written to. + - H, S and P are always retained and ignored under Linux. + + - A is cleared when a file is written to. User id and group id will be used unless set[gu]id are given as mount options. Since most of the Amiga file systems are single user systems @@ -128,11 +130,13 @@ Linux -> Amiga: The Linux rwxrwxrwx file mode is handled as follows: - - r permission will set R for user, group and others. + - r permission will allow R for user, group and others. + + - w permission will allow W for user, group and others. - - w permission will set W and D for user, group and others. + - x permission of the user will allow E for plain files. - - x permission of the user will set E for plain files. + - D will be allowed for user, group and others. - All other flags (suid, sgid, ...) are ignored and will not be retained. diff --git a/Documentation/filesystems/ceph.rst b/Documentation/filesystems/ceph.rst index 0aa70750df0f..7d2ef4e27273 100644 --- a/Documentation/filesystems/ceph.rst +++ b/Documentation/filesystems/ceph.rst @@ -163,14 +163,14 @@ Mount Options to the default VFS implementation if this option is used. recover_session=<no|clean> - Set auto reconnect mode in the case where the client is blacklisted. The + Set auto reconnect mode in the case where the client is blocklisted. The available modes are "no" and "clean". The default is "no". * no: never attempt to reconnect when client detects that it has been - blacklisted. Operations will generally fail after being blacklisted. + blocklisted. Operations will generally fail after being blocklisted. * clean: client reconnects to the ceph cluster automatically when it - detects that it has been blacklisted. During reconnect, client drops + detects that it has been blocklisted. During reconnect, client drops dirty data/metadata, invalidates page caches and writable file handles. After reconnect, file locks become stale because the MDS loses track of them. If an inode contains any stale file locks, read/write on the diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst index ea613ee701f5..805a1e9ea3a5 100644 --- a/Documentation/filesystems/ext4/journal.rst +++ b/Documentation/filesystems/ext4/journal.rst @@ -28,6 +28,17 @@ metadata are written to disk through the journal. This is slower but safest. If ``data=writeback``, dirty data blocks are not flushed to the disk before the metadata are written to disk through the journal. +In case of ``data=ordered`` mode, Ext4 also supports fast commits which +help reduce commit latency significantly. The default ``data=ordered`` +mode works by logging metadata blocks to the journal. In fast commit +mode, Ext4 only stores the minimal delta needed to recreate the +affected metadata in fast commit space that is shared with JBD2. +Once the fast commit area fills in or if fast commit is not possible +or if JBD2 commit timer goes off, Ext4 performs a traditional full commit. +A full commit invalidates all the fast commits that happened before +it and thus it makes the fast commit area empty for further fast +commits. This feature needs to be enabled at mkfs time. + The journal inode is typically inode 8. The first 68 bytes of the journal inode are replicated in the ext4 superblock. The journal itself is normal (but hidden) file within the filesystem. The file usually @@ -609,3 +620,58 @@ bytes long (but uses a full block): - h\_commit\_nsec - Nanoseconds component of the above timestamp. +Fast commits +~~~~~~~~~~~~ + +Fast commit area is organized as a log of tag length values. Each TLV has +a ``struct ext4_fc_tl`` in the beginning which stores the tag and the length +of the entire field. It is followed by variable length tag specific value. +Here is the list of supported tags and their meanings: + +.. list-table:: + :widths: 8 20 20 32 + :header-rows: 1 + + * - Tag + - Meaning + - Value struct + - Description + * - EXT4_FC_TAG_HEAD + - Fast commit area header + - ``struct ext4_fc_head`` + - Stores the TID of the transaction after which these fast commits should + be applied. + * - EXT4_FC_TAG_ADD_RANGE + - Add extent to inode + - ``struct ext4_fc_add_range`` + - Stores the inode number and extent to be added in this inode + * - EXT4_FC_TAG_DEL_RANGE + - Remove logical offsets to inode + - ``struct ext4_fc_del_range`` + - Stores the inode number and the logical offset range that needs to be + removed + * - EXT4_FC_TAG_CREAT + - Create directory entry for a newly created file + - ``struct ext4_fc_dentry_info`` + - Stores the parent inode number, inode number and directory entry of the + newly created file + * - EXT4_FC_TAG_LINK + - Link a directory entry to an inode + - ``struct ext4_fc_dentry_info`` + - Stores the parent inode number, inode number and directory entry + * - EXT4_FC_TAG_UNLINK + - Unlink a directory entry of an inode + - ``struct ext4_fc_dentry_info`` + - Stores the parent inode number, inode number and directory entry + + * - EXT4_FC_TAG_PAD + - Padding (unused area) + - None + - Unused bytes in the fast commit area. + + * - EXT4_FC_TAG_TAIL + - Mark the end of a fast commit + - ``struct ext4_fc_tail`` + - Stores the TID of the commit, CRC of the fast commit of which this tag + represents the end of + diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst index ec8d99703ecb..b8ee761c9922 100644 --- a/Documentation/filesystems/f2fs.rst +++ b/Documentation/filesystems/f2fs.rst @@ -127,14 +127,14 @@ active_logs=%u Support configuring the number of active logs. In the current design, f2fs supports only 2, 4, and 6 logs. Default number is 6. disable_ext_identify Disable the extension list configured by mkfs, so f2fs - does not aware of cold files such as media files. + is not aware of cold files such as media files. inline_xattr Enable the inline xattrs feature. noinline_xattr Disable the inline xattrs feature. inline_xattr_size=%u Support configuring inline xattr size, it depends on flexible inline xattr feature. -inline_data Enable the inline data feature: New created small(<~3.4k) +inline_data Enable the inline data feature: Newly created small (<~3.4k) files can be written into inode block. -inline_dentry Enable the inline dir feature: data in new created +inline_dentry Enable the inline dir feature: data in newly created directory entries can be written into inode block. The space of inode block which is used to store inline dentries is limited to ~3.4k. @@ -203,9 +203,9 @@ usrjquota=<file> Appoint specified file and type during mount, so that quota grpjquota=<file> information can be properly updated during recovery flow, prjjquota=<file> <quota file>: must be in root directory; jqfmt=<quota type> <quota type>: [vfsold,vfsv0,vfsv1]. -offusrjquota Turn off user journelled quota. -offgrpjquota Turn off group journelled quota. -offprjjquota Turn off project journelled quota. +offusrjquota Turn off user journalled quota. +offgrpjquota Turn off group journalled quota. +offprjjquota Turn off project journalled quota. quota Enable plain user disk quota accounting. noquota Disable all plain disk quota option. whint_mode=%s Control which write hints are passed down to block @@ -266,6 +266,8 @@ inlinecrypt When possible, encrypt/decrypt the contents of encrypted inline encryption hardware. The on-disk format is unaffected. For more details, see Documentation/block/inline-encryption.rst. +atgc Enable age-threshold garbage collection, it provides high + effectiveness and efficiency on background GC. ======================== ============================================================ Debugfs Entries @@ -301,7 +303,7 @@ Usage # insmod f2fs.ko -3. Create a directory trying to mount:: +3. Create a directory to use when mounting:: # mkdir /mnt/f2fs @@ -315,7 +317,7 @@ mkfs.f2fs The mkfs.f2fs is for the use of formatting a partition as the f2fs filesystem, which builds a basic on-disk layout. -The options consist of: +The quick options consist of: =============== =========================================================== ``-l [label]`` Give a volume label, up to 512 unicode name. @@ -337,6 +339,8 @@ The options consist of: 1 is set by default, which conducts discard. =============== =========================================================== +Note: please refer to the manpage of mkfs.f2fs(8) to get full option list. + fsck.f2fs --------- The fsck.f2fs is a tool to check the consistency of an f2fs-formatted @@ -344,10 +348,12 @@ partition, which examines whether the filesystem metadata and user-made data are cross-referenced correctly or not. Note that, initial version of the tool does not fix any inconsistency. -The options consist of:: +The quick options consist of:: -d debug level [default:0] +Note: please refer to the manpage of fsck.f2fs(8) to get full option list. + dump.f2fs --------- The dump.f2fs shows the information of specific inode and dumps SSA and SIT to @@ -371,6 +377,37 @@ Examples:: # dump.f2fs -s 0~-1 /dev/sdx (SIT dump) # dump.f2fs -a 0~-1 /dev/sdx (SSA dump) +Note: please refer to the manpage of dump.f2fs(8) to get full option list. + +sload.f2fs +---------- +The sload.f2fs gives a way to insert files and directories in the exisiting disk +image. This tool is useful when building f2fs images given compiled files. + +Note: please refer to the manpage of sload.f2fs(8) to get full option list. + +resize.f2fs +----------- +The resize.f2fs lets a user resize the f2fs-formatted disk image, while preserving +all the files and directories stored in the image. + +Note: please refer to the manpage of resize.f2fs(8) to get full option list. + +defrag.f2fs +----------- +The defrag.f2fs can be used to defragment scattered written data as well as +filesystem metadata across the disk. This can improve the write speed by giving +more free consecutive space. + +Note: please refer to the manpage of defrag.f2fs(8) to get full option list. + +f2fs_io +------- +The f2fs_io is a simple tool to issue various filesystem APIs as well as +f2fs-specific ones, which is very useful for QA tests. + +Note: please refer to the manpage of f2fs_io(8) to get full option list. + Design ====== @@ -383,7 +420,7 @@ consists of a set of sections. By default, section and zone sizes are set to one segment size identically, but users can easily modify the sizes by mkfs. F2FS splits the entire volume into six areas, and all the areas except superblock -consists of multiple segments as described below:: +consist of multiple segments as described below:: align with the zone size <-| |-> align with the segment size @@ -486,7 +523,7 @@ one inode block (i.e., a file) covers:: `- direct node (1018) `- data (1018) -Note that, all the node blocks are mapped by NAT which means the location of +Note that all the node blocks are mapped by NAT which means the location of each node is translated by the NAT table. In the consideration of the wandering tree problem, F2FS is able to cut off the propagation of node updates caused by leaf data writes. @@ -566,7 +603,7 @@ When F2FS finds a file name in a directory, at first a hash value of the file name is calculated. Then, F2FS scans the hash table in level #0 to find the dentry consisting of the file name and its inode number. If not found, F2FS scans the next hash table in level #1. In this way, F2FS scans hash tables in -each levels incrementally from 1 to N. In each levels F2FS needs to scan only +each levels incrementally from 1 to N. In each level F2FS needs to scan only one bucket determined by the following equation, which shows O(log(# of files)) complexity:: @@ -707,7 +744,7 @@ WRITE_LIFE_LONG " WRITE_LIFE_LONG Fallocate(2) Policy ------------------- -The default policy follows the below posix rule. +The default policy follows the below POSIX rule. Allocating disk space The default operation (i.e., mode is zero) of fallocate() allocates @@ -720,7 +757,7 @@ Allocating disk space as a method of optimally implementing that function. However, once F2FS receives ioctl(fd, F2FS_IOC_SET_PIN_FILE) in prior to -fallocate(fd, DEFAULT_MODE), it allocates on-disk blocks addressess having +fallocate(fd, DEFAULT_MODE), it allocates on-disk block addressess having zero or random data, which is useful to the below scenario where: 1. create(fd) @@ -739,7 +776,7 @@ Compression implementation cluster can be compressed or not. - In cluster metadata layout, one special block address is used to indicate - cluster is compressed one or normal one, for compressed cluster, following + a cluster is a compressed one or normal one; for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. @@ -772,3 +809,18 @@ Compress metadata layout:: +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ + +NVMe Zoned Namespace devices +---------------------------- + +- ZNS defines a per-zone capacity which can be equal or less than the + zone-size. Zone-capacity is the number of usable blocks in the zone. + F2FS checks if zone-capacity is less than zone-size, if it is, then any + segment which starts after the zone-capacity is marked as not-free in + the free segment bitmap at initial mount time. These segments are marked + as permanently used so they are not allocated for writes and + consequently are not needed to be garbage collected. In case the + zone-capacity is not aligned to default segment size(2MB), then a segment + can start before the zone-capacity and span across zone-capacity boundary. + Such spanning segments are also considered as usable segments. All blocks + past the zone-capacity are considered unusable in these segments. diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst index 423c5a0daf45..44b67ebd6e40 100644 --- a/Documentation/filesystems/fscrypt.rst +++ b/Documentation/filesystems/fscrypt.rst @@ -436,9 +436,9 @@ FS_IOC_SET_ENCRYPTION_POLICY The FS_IOC_SET_ENCRYPTION_POLICY ioctl sets an encryption policy on an empty directory or verifies that a directory or regular file already -has the specified encryption policy. It takes in a pointer to a -:c:type:`struct fscrypt_policy_v1` or a :c:type:`struct -fscrypt_policy_v2`, defined as follows:: +has the specified encryption policy. It takes in a pointer to +struct fscrypt_policy_v1 or struct fscrypt_policy_v2, defined as +follows:: #define FSCRYPT_POLICY_V1 0 #define FSCRYPT_KEY_DESCRIPTOR_SIZE 8 @@ -464,11 +464,11 @@ fscrypt_policy_v2`, defined as follows:: This structure must be initialized as follows: -- ``version`` must be FSCRYPT_POLICY_V1 (0) if the struct is - :c:type:`fscrypt_policy_v1` or FSCRYPT_POLICY_V2 (2) if the struct - is :c:type:`fscrypt_policy_v2`. (Note: we refer to the original - policy version as "v1", though its version code is really 0.) For - new encrypted directories, use v2 policies. +- ``version`` must be FSCRYPT_POLICY_V1 (0) if + struct fscrypt_policy_v1 is used or FSCRYPT_POLICY_V2 (2) if + struct fscrypt_policy_v2 is used. (Note: we refer to the original + policy version as "v1", though its version code is really 0.) + For new encrypted directories, use v2 policies. - ``contents_encryption_mode`` and ``filenames_encryption_mode`` must be set to constants from ``<linux/fscrypt.h>`` which identify the @@ -508,9 +508,9 @@ This structure must be initialized as follows: replaced with ``master_key_identifier``, which is longer and cannot be arbitrarily chosen. Instead, the key must first be added using `FS_IOC_ADD_ENCRYPTION_KEY`_. Then, the ``key_spec.u.identifier`` - the kernel returned in the :c:type:`struct fscrypt_add_key_arg` must - be used as the ``master_key_identifier`` in the :c:type:`struct - fscrypt_policy_v2`. + the kernel returned in the struct fscrypt_add_key_arg must + be used as the ``master_key_identifier`` in + struct fscrypt_policy_v2. If the file is not yet encrypted, then FS_IOC_SET_ENCRYPTION_POLICY verifies that the file is an empty directory. If so, the specified @@ -590,7 +590,7 @@ FS_IOC_GET_ENCRYPTION_POLICY_EX The FS_IOC_GET_ENCRYPTION_POLICY_EX ioctl retrieves the encryption policy, if any, for a directory or regular file. No additional permissions are required beyond the ability to open the file. It -takes in a pointer to a :c:type:`struct fscrypt_get_policy_ex_arg`, +takes in a pointer to struct fscrypt_get_policy_ex_arg, defined as follows:: struct fscrypt_get_policy_ex_arg { @@ -637,9 +637,8 @@ The FS_IOC_GET_ENCRYPTION_POLICY ioctl can also retrieve the encryption policy, if any, for a directory or regular file. However, unlike `FS_IOC_GET_ENCRYPTION_POLICY_EX`_, FS_IOC_GET_ENCRYPTION_POLICY only supports the original policy -version. It takes in a pointer directly to a :c:type:`struct -fscrypt_policy_v1` rather than a :c:type:`struct -fscrypt_get_policy_ex_arg`. +version. It takes in a pointer directly to struct fscrypt_policy_v1 +rather than struct fscrypt_get_policy_ex_arg. The error codes for FS_IOC_GET_ENCRYPTION_POLICY are the same as those for FS_IOC_GET_ENCRYPTION_POLICY_EX, except that @@ -680,8 +679,7 @@ the filesystem, making all files on the filesystem which were encrypted using that key appear "unlocked", i.e. in plaintext form. It can be executed on any file or directory on the target filesystem, but using the filesystem's root directory is recommended. It takes in -a pointer to a :c:type:`struct fscrypt_add_key_arg`, defined as -follows:: +a pointer to struct fscrypt_add_key_arg, defined as follows:: struct fscrypt_add_key_arg { struct fscrypt_key_specifier key_spec; @@ -710,17 +708,16 @@ follows:: __u8 raw[]; }; -:c:type:`struct fscrypt_add_key_arg` must be zeroed, then initialized +struct fscrypt_add_key_arg must be zeroed, then initialized as follows: - If the key is being added for use by v1 encryption policies, then ``key_spec.type`` must contain FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR, and ``key_spec.u.descriptor`` must contain the descriptor of the key being added, corresponding to the value in the - ``master_key_descriptor`` field of :c:type:`struct - fscrypt_policy_v1`. To add this type of key, the calling process - must have the CAP_SYS_ADMIN capability in the initial user - namespace. + ``master_key_descriptor`` field of struct fscrypt_policy_v1. + To add this type of key, the calling process must have the + CAP_SYS_ADMIN capability in the initial user namespace. Alternatively, if the key is being added for use by v2 encryption policies, then ``key_spec.type`` must contain @@ -737,12 +734,13 @@ as follows: - ``key_id`` is 0 if the raw key is given directly in the ``raw`` field. Otherwise ``key_id`` is the ID of a Linux keyring key of - type "fscrypt-provisioning" whose payload is a :c:type:`struct - fscrypt_provisioning_key_payload` whose ``raw`` field contains the - raw key and whose ``type`` field matches ``key_spec.type``. Since - ``raw`` is variable-length, the total size of this key's payload - must be ``sizeof(struct fscrypt_provisioning_key_payload)`` plus the - raw key size. The process must have Search permission on this key. + type "fscrypt-provisioning" whose payload is + struct fscrypt_provisioning_key_payload whose ``raw`` field contains + the raw key and whose ``type`` field matches ``key_spec.type``. + Since ``raw`` is variable-length, the total size of this key's + payload must be ``sizeof(struct fscrypt_provisioning_key_payload)`` + plus the raw key size. The process must have Search permission on + this key. Most users should leave this 0 and specify the raw key directly. The support for specifying a Linux keyring key is intended mainly to @@ -860,8 +858,8 @@ The FS_IOC_REMOVE_ENCRYPTION_KEY ioctl removes a claim to a master encryption key from the filesystem, and possibly removes the key itself. It can be executed on any file or directory on the target filesystem, but using the filesystem's root directory is recommended. -It takes in a pointer to a :c:type:`struct fscrypt_remove_key_arg`, -defined as follows:: +It takes in a pointer to struct fscrypt_remove_key_arg, defined +as follows:: struct fscrypt_remove_key_arg { struct fscrypt_key_specifier key_spec; @@ -956,8 +954,8 @@ FS_IOC_GET_ENCRYPTION_KEY_STATUS The FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl retrieves the status of a master encryption key. It can be executed on any file or directory on the target filesystem, but using the filesystem's root directory is -recommended. It takes in a pointer to a :c:type:`struct -fscrypt_get_key_status_arg`, defined as follows:: +recommended. It takes in a pointer to +struct fscrypt_get_key_status_arg, defined as follows:: struct fscrypt_get_key_status_arg { /* input */ @@ -1148,10 +1146,10 @@ Implementation details Encryption context ------------------ -An encryption policy is represented on-disk by a :c:type:`struct -fscrypt_context_v1` or a :c:type:`struct fscrypt_context_v2`. It is -up to individual filesystems to decide where to store it, but normally -it would be stored in a hidden extended attribute. It should *not* be +An encryption policy is represented on-disk by +struct fscrypt_context_v1 or struct fscrypt_context_v2. It is up to +individual filesystems to decide where to store it, but normally it +would be stored in a hidden extended attribute. It should *not* be exposed by the xattr-related system calls such as getxattr() and setxattr() because of the special semantics of the encryption xattr. (In particular, there would be much confusion if an encryption policy @@ -1249,8 +1247,8 @@ a strong "hash" of the ciphertext filename, along with the optional filesystem-specific hash(es) needed for directory lookups. This allows the filesystem to still, with a high degree of confidence, map the filename given in ->lookup() back to a particular directory entry -that was previously listed by readdir(). See :c:type:`struct -fscrypt_nokey_name` in the source for more details. +that was previously listed by readdir(). See +struct fscrypt_nokey_name in the source for more details. Note that the precise way that filenames are presented to userspace without the key is subject to change in the future. It is only meant diff --git a/Documentation/filesystems/fsverity.rst b/Documentation/filesystems/fsverity.rst index 6c8944f6f0f7..895e9711ed88 100644 --- a/Documentation/filesystems/fsverity.rst +++ b/Documentation/filesystems/fsverity.rst @@ -84,7 +84,7 @@ FS_IOC_ENABLE_VERITY -------------------- The FS_IOC_ENABLE_VERITY ioctl enables fs-verity on a file. It takes -in a pointer to a :c:type:`struct fsverity_enable_arg`, defined as +in a pointer to a struct fsverity_enable_arg, defined as follows:: struct fsverity_enable_arg { diff --git a/Documentation/filesystems/fuse.rst b/Documentation/filesystems/fuse.rst index cd717f9bf940..8120c3c0cb4e 100644 --- a/Documentation/filesystems/fuse.rst +++ b/Documentation/filesystems/fuse.rst @@ -47,7 +47,7 @@ filesystems. A good example is sshfs: a secure network filesystem using the sftp protocol. The userspace library and utilities are available from the -`FUSE homepage: <http://fuse.sourceforge.net/>`_ +`FUSE homepage: <https://github.com/libfuse/>`_ Filesystem type =============== diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index 4c536e66dc4c..98f59a864242 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -34,8 +34,6 @@ algorithms work. quota seq_file sharedsubtree - sysfs-pci - sysfs-tagging automount-support diff --git a/Documentation/filesystems/journalling.rst b/Documentation/filesystems/journalling.rst index 7e2be2faf653..5a5f70b4063e 100644 --- a/Documentation/filesystems/journalling.rst +++ b/Documentation/filesystems/journalling.rst @@ -132,6 +132,39 @@ The opportunities for abuse and DOS attacks with this should be obvious, if you allow unprivileged userspace to trigger codepaths containing these calls. +Fast commits +~~~~~~~~~~~~ + +JBD2 to also allows you to perform file-system specific delta commits known as +fast commits. In order to use fast commits, you first need to call +:c:func:`jbd2_fc_init` and tell how many blocks at the end of journal +area should be reserved for fast commits. Along with that, you will also need +to set following callbacks that perform correspodning work: + +`journal->j_fc_cleanup_cb`: Cleanup function called after every full commit and +fast commit. + +`journal->j_fc_replay_cb`: Replay function called for replay of fast commit +blocks. + +File system is free to perform fast commits as and when it wants as long as it +gets permission from JBD2 to do so by calling the function +:c:func:`jbd2_fc_begin_commit()`. Once a fast commit is done, the client +file system should tell JBD2 about it by calling +:c:func:`jbd2_fc_end_commit()`. If file system wants JBD2 to perform a full +commit immediately after stopping the fast commit it can do so by calling +:c:func:`jbd2_fc_end_commit_fallback()`. This is useful if fast commit operation +fails for some reason and the only way to guarantee consistency is for JBD2 to +perform the full traditional commit. + +JBD2 helper functions to manage fast commit buffers. File system can use +:c:func:`jbd2_fc_get_buf()` and :c:func:`jbd2_fc_wait_bufs()` to allocate +and wait on IO completion of fast commit buffers. + +Currently, only Ext4 implements fast commits. For details of its implementation +of fast commits, please refer to the top level comments in +fs/ext4/fast_commit.c. + Summary ~~~~~~~ diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst index 64f94a18d97e..c0f2c7586531 100644 --- a/Documentation/filesystems/locking.rst +++ b/Documentation/filesystems/locking.rst @@ -488,9 +488,6 @@ getgeo: no swap_slot_free_notify: no (see below) ======================= =================== -unlock_native_capacity and revalidate_disk are called only from -check_disk_change(). - swap_slot_free_notify is called with swap_lock and sometimes the page lock held. diff --git a/Documentation/filesystems/mount_api.rst b/Documentation/filesystems/mount_api.rst index 29c169c68961..d7f53d62b5bb 100644 --- a/Documentation/filesystems/mount_api.rst +++ b/Documentation/filesystems/mount_api.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 ==================== -fILESYSTEM Mount API +Filesystem Mount API ==================== .. CONTENTS @@ -479,7 +479,7 @@ returned. int vfs_parse_fs_param(struct fs_context *fc, struct fs_parameter *param); - Supply a single mount parameter to the filesystem context. This include + Supply a single mount parameter to the filesystem context. This includes the specification of the source/device which is specified as the "source" parameter (which may be specified multiple times if the filesystem supports that). @@ -592,8 +592,7 @@ The following helpers all wrap sget_fc(): one. -===================== -PARAMETER DESCRIPTION +Parameter Description ===================== Parameters are described using structures defined in linux/fs_parser.h. diff --git a/Documentation/filesystems/nfs/rpc-server-gss.rst b/Documentation/filesystems/nfs/rpc-server-gss.rst index abed4a2b1b82..ccaea9e7cea2 100644 --- a/Documentation/filesystems/nfs/rpc-server-gss.rst +++ b/Documentation/filesystems/nfs/rpc-server-gss.rst @@ -13,10 +13,9 @@ RPCGSS is specified in a few IETF documents: - RFC2203 v1: https://tools.ietf.org/rfc/rfc2203.txt - RFC5403 v2: https://tools.ietf.org/rfc/rfc5403.txt -and there is a 3rd version being proposed: +There is a third version that we don't currently implement: - - https://tools.ietf.org/id/draft-williams-rpcsecgssv3.txt - (At draft n. 02 at the time of writing) + - RFC7861 v3: https://tools.ietf.org/rfc/rfc7861.txt Background ========== diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst index 8ea83a51c266..580ab9a0fe31 100644 --- a/Documentation/filesystems/overlayfs.rst +++ b/Documentation/filesystems/overlayfs.rst @@ -564,6 +564,25 @@ Note: the mount options index=off,nfs_export=on are conflicting for a read-write mount and will result in an error. +Volatile mount +-------------- + +This is enabled with the "volatile" mount option. Volatile mounts are not +guaranteed to survive a crash. It is strongly recommended that volatile +mounts are only used if data written to the overlay can be recreated +without significant effort. + +The advantage of mounting with the "volatile" option is that all forms of +sync calls to the upper filesystem are omitted. + +When overlay is mounted with "volatile" option, the directory +"$workdir/work/incompat/volatile" is created. During next mount, overlay +checks for this directory and refuses to mount if present. This is a strong +indicator that user should throw away upper and work directories and create +fresh one. In very limited cases where the user knows that the system has +not crashed and contents of upperdir are intact, The "volatile" directory +can be removed. + Testsuite --------- diff --git a/Documentation/filesystems/seq_file.rst b/Documentation/filesystems/seq_file.rst index 7f7ee06b2693..56856481dc8d 100644 --- a/Documentation/filesystems/seq_file.rst +++ b/Documentation/filesystems/seq_file.rst @@ -129,7 +129,9 @@ also a special value which can be returned by the start() function called SEQ_START_TOKEN; it can be used if you wish to instruct your show() function (described below) to print a header at the top of the output. SEQ_START_TOKEN should only be used if the offset is zero, -however. +however. SEQ_START_TOKEN has no special meaning to the core seq_file +code. It is provided as a convenience for a start() funciton to +communicate with the next() and show() functions. The next function to implement is called, amazingly, next(); its job is to move the iterator forward to the next position in the sequence. The @@ -145,6 +147,22 @@ complete. Here's the example version:: return spos; } +The next() function should set ``*pos`` to a value that start() can use +to find the new location in the sequence. When the iterator is being +stored in the private data area, rather than being reinitialized on each +start(), it might seem sufficient to simply set ``*pos`` to any non-zero +value (zero always tells start() to restart the sequence). This is not +sufficient due to historical problems. + +Historically, many next() functions have *not* updated ``*pos`` at +end-of-file. If the value is then used by start() to initialise the +iterator, this can result in corner cases where the last entry in the +sequence is reported twice in the file. In order to discourage this bug +from being resurrected, the core seq_file code now produces a warning if +a next() function does not change the value of ``*pos``. Consequently a +next() function *must* change the value of ``*pos``, and of course must +set it to a non-zero value. + The stop() function closes a session; its job, of course, is to clean up. If dynamic memory is allocated for the iterator, stop() is the place to free it; if a lock was taken by start(), stop() must release diff --git a/Documentation/filesystems/sysfs.rst b/Documentation/filesystems/sysfs.rst index ab0f7795792b..004d490179f3 100644 --- a/Documentation/filesystems/sysfs.rst +++ b/Documentation/filesystems/sysfs.rst @@ -172,14 +172,13 @@ calls the associated methods. To illustrate:: - #define to_dev(obj) container_of(obj, struct device, kobj) #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr) static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) { struct device_attribute *dev_attr = to_dev_attr(attr); - struct device *dev = to_dev(kobj); + struct device *dev = kobj_to_dev(kobj); ssize_t ret = -EIO; if (dev_attr->show) @@ -242,12 +241,10 @@ Other notes: is 4096. - show() methods should return the number of bytes printed into the - buffer. This is the return value of scnprintf(). + buffer. -- show() must not use snprintf() when formatting the value to be - returned to user space. If you can guarantee that an overflow - will never happen you can use sprintf() otherwise you must use - scnprintf(). +- show() should only use sysfs_emit() or sysfs_emit_at() when formatting + the value to be returned to user space. - store() should return the number of bytes used from the buffer. If the entire buffer has been used, just return the count argument. diff --git a/Documentation/filesystems/ubifs-authentication.rst b/Documentation/filesystems/ubifs-authentication.rst index 1f39c8cea702..5210aed2afbc 100644 --- a/Documentation/filesystems/ubifs-authentication.rst +++ b/Documentation/filesystems/ubifs-authentication.rst @@ -1,11 +1,13 @@ .. SPDX-License-Identifier: GPL-2.0 -:orphan: - .. UBIFS Authentication .. sigma star gmbh .. 2018 +============================ +UBIFS Authentication Support +============================ + Introduction ============ diff --git a/Documentation/filesystems/zonefs.rst b/Documentation/filesystems/zonefs.rst index 6c18bc8ce332..6b213fe9a33e 100644 --- a/Documentation/filesystems/zonefs.rst +++ b/Documentation/filesystems/zonefs.rst @@ -326,6 +326,21 @@ discover the amount of data that has been written to the zone. In the case of a read-only zone discovered at run-time, as indicated in the previous section. The size of the zone file is left unchanged from its last updated value. +A zoned block device (e.g. an NVMe Zoned Namespace device) may have limits on +the number of zones that can be active, that is, zones that are in the +implicit open, explicit open or closed conditions. This potential limitation +translates into a risk for applications to see write IO errors due to this +limit being exceeded if the zone of a file is not already active when a write +request is issued by the user. + +To avoid these potential errors, the "explicit-open" mount option forces zones +to be made active using an open zone command when a file is opened for writing +for the first time. If the zone open command succeeds, the application is then +guaranteed that write requests can be processed. Conversely, the +"explicit-open" mount option will result in a zone close command being issued +to the device on the last close() of a zone file if the zone is not full nor +empty. + Zonefs User Space Tools ======================= diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst index ad3b5afdae77..f72b5f1769fb 100644 --- a/Documentation/firmware-guide/acpi/index.rst +++ b/Documentation/firmware-guide/acpi/index.rst @@ -26,3 +26,4 @@ ACPI Support lpit video_extension extcon-intel-int3496 + intel-pmc-mux diff --git a/Documentation/gpu/amdgpu.rst b/Documentation/gpu/amdgpu.rst index 17112352f605..1f9ea8221f80 100644 --- a/Documentation/gpu/amdgpu.rst +++ b/Documentation/gpu/amdgpu.rst @@ -70,6 +70,15 @@ Interrupt Handling .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c :internal: +IP Blocks +------------------ + +.. kernel-doc:: drivers/gpu/drm/amd/include/amd_shared.h + :doc: IP Blocks + +.. kernel-doc:: drivers/gpu/drm/amd/include/amd_shared.h + :identifiers: amd_ip_block_type amd_ip_funcs + AMDGPU XGMI Support =================== @@ -153,7 +162,7 @@ This section covers hwmon and power/thermal controls. HWMON Interfaces ---------------- -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: hwmon GPU sysfs Power State Interfaces @@ -164,48 +173,54 @@ GPU power controls are exposed via sysfs files. power_dpm_state ~~~~~~~~~~~~~~~ -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: power_dpm_state power_dpm_force_performance_level ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: power_dpm_force_performance_level pp_table ~~~~~~~~ -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: pp_table pp_od_clk_voltage ~~~~~~~~~~~~~~~~~ -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: pp_od_clk_voltage pp_dpm_* ~~~~~~~~ -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: pp_dpm_sclk pp_dpm_mclk pp_dpm_socclk pp_dpm_fclk pp_dpm_dcefclk pp_dpm_pcie pp_power_profile_mode ~~~~~~~~~~~~~~~~~~~~~ -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: pp_power_profile_mode -*_busy_percent -~~~~~~~~~~~~~~ +\*_busy_percent +~~~~~~~~~~~~~~~ -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: gpu_busy_percent -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: mem_busy_percent +gpu_metrics +~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c + :doc: gpu_metrics + GPU Product Information ======================= @@ -233,7 +248,7 @@ serial_number unique_id --------- -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: unique_id GPU Memory Usage Information @@ -283,7 +298,7 @@ PCIe Accounting Information pcie_bw ------- -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: pcie_bw pcie_replay_count diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index 496d8fcd4da0..7dce175f6d75 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -1,3 +1,5 @@ +.. Copyright 2020 DisplayLink (UK) Ltd. + =================== Userland interfaces =================== @@ -162,6 +164,116 @@ other hand, a driver requires shared state between clients which is visible to user-space and accessible beyond open-file boundaries, they cannot support render nodes. +Device Hot-Unplug +================= + +.. note:: + The following is the plan. Implementation is not there yet + (2020 May). + +Graphics devices (display and/or render) may be connected via USB (e.g. +display adapters or docking stations) or Thunderbolt (e.g. eGPU). An end +user is able to hot-unplug this kind of devices while they are being +used, and expects that the very least the machine does not crash. Any +damage from hot-unplugging a DRM device needs to be limited as much as +possible and userspace must be given the chance to handle it if it wants +to. Ideally, unplugging a DRM device still lets a desktop continue to +run, but that is going to need explicit support throughout the whole +graphics stack: from kernel and userspace drivers, through display +servers, via window system protocols, and in applications and libraries. + +Other scenarios that should lead to the same are: unrecoverable GPU +crash, PCI device disappearing off the bus, or forced unbind of a driver +from the physical device. + +In other words, from userspace perspective everything needs to keep on +working more or less, until userspace stops using the disappeared DRM +device and closes it completely. Userspace will learn of the device +disappearance from the device removed uevent, ioctls returning ENODEV +(or driver-specific ioctls returning driver-specific things), or open() +returning ENXIO. + +Only after userspace has closed all relevant DRM device and dmabuf file +descriptors and removed all mmaps, the DRM driver can tear down its +instance for the device that no longer exists. If the same physical +device somehow comes back in the mean time, it shall be a new DRM +device. + +Similar to PIDs, chardev minor numbers are not recycled immediately. A +new DRM device always picks the next free minor number compared to the +previous one allocated, and wraps around when minor numbers are +exhausted. + +The goal raises at least the following requirements for the kernel and +drivers. + +Requirements for KMS UAPI +------------------------- + +- KMS connectors must change their status to disconnected. + +- Legacy modesets and pageflips, and atomic commits, both real and + TEST_ONLY, and any other ioctls either fail with ENODEV or fake + success. + +- Pending non-blocking KMS operations deliver the DRM events userspace + is expecting. This applies also to ioctls that faked success. + +- open() on a device node whose underlying device has disappeared will + fail with ENXIO. + +- Attempting to create a DRM lease on a disappeared DRM device will + fail with ENODEV. Existing DRM leases remain and work as listed + above. + +Requirements for Render and Cross-Device UAPI +--------------------------------------------- + +- All GPU jobs that can no longer run must have their fences + force-signalled to avoid inflicting hangs on userspace. + The associated error code is ENODEV. + +- Some userspace APIs already define what should happen when the device + disappears (OpenGL, GL ES: `GL_KHR_robustness`_; `Vulkan`_: + VK_ERROR_DEVICE_LOST; etc.). DRM drivers are free to implement this + behaviour the way they see best, e.g. returning failures in + driver-specific ioctls and handling those in userspace drivers, or + rely on uevents, and so on. + +- dmabuf which point to memory that has disappeared will either fail to + import with ENODEV or continue to be successfully imported if it would + have succeeded before the disappearance. See also about memory maps + below for already imported dmabufs. + +- Attempting to import a dmabuf to a disappeared device will either fail + with ENODEV or succeed if it would have succeeded without the + disappearance. + +- open() on a device node whose underlying device has disappeared will + fail with ENXIO. + +.. _GL_KHR_robustness: https://www.khronos.org/registry/OpenGL/extensions/KHR/KHR_robustness.txt +.. _Vulkan: https://www.khronos.org/vulkan/ + +Requirements for Memory Maps +---------------------------- + +Memory maps have further requirements that apply to both existing maps +and maps created after the device has disappeared. If the underlying +memory disappears, the map is created or modified such that reads and +writes will still complete successfully but the result is undefined. +This applies to both userspace mmap()'d memory and memory pointed to by +dmabuf which might be mapped to other devices (cross-device dmabuf +imports). + +Raising SIGBUS is not an option, because userspace cannot realistically +handle it. Signal handlers are global, which makes them extremely +difficult to use correctly from libraries like those that Mesa produces. +Signal handlers are not composable, you can't have different handlers +for GPU1 and GPU2 from different vendors, and a third handler for +mmapped regular files. Threads cause additional pain with signal +handling as well. + .. _drm_driver_ioctl: IOCTL Support on Device Nodes @@ -199,7 +311,7 @@ EPERM/EACCES: difference between EACCES and EPERM. ENODEV: - The device is not (yet) present or fully initialized. + The device is not present anymore or is not yet fully initialized. EOPNOTSUPP: Feature (like PRIME, modesetting, GEM) is not supported by the driver. diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index 33cc6ddf8f64..cff1f154b473 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -636,15 +636,36 @@ i915 Perf Observation Architecture Stream .. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c :functions: i915_oa_poll_wait -All i915 Perf Internals ------------------------ +Other i915 Perf Internals +------------------------- -This section simply includes all currently documented i915 perf internals, in -no particular order, but may include some more minor utilities or platform +This section simply includes all other currently documented i915 perf internals, +in no particular order, but may include some more minor utilities or platform specific details than found in the more high-level sections. .. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c :internal: + :no-identifiers: + i915_perf_init + i915_perf_fini + i915_perf_register + i915_perf_unregister + i915_perf_open_ioctl + i915_perf_release + i915_perf_add_config_ioctl + i915_perf_remove_config_ioctl + read_properties_unlocked + i915_perf_open_ioctl_locked + i915_perf_destroy_locked + i915_perf_read i915_perf_ioctl + i915_perf_enable_locked + i915_perf_disable_locked + i915_perf_poll i915_perf_poll_locked + i915_oa_stream_init i915_oa_read + i915_oa_stream_enable + i915_oa_stream_disable + i915_oa_wait_unlocked + i915_oa_poll_wait Style ===== diff --git a/Documentation/gpu/pl111.rst b/Documentation/gpu/pl111.rst index 9b03736d33dd..6d9a1b59a545 100644 --- a/Documentation/gpu/pl111.rst +++ b/Documentation/gpu/pl111.rst @@ -1,6 +1,6 @@ -========================================== - drm/pl111 ARM PrimeCell PL111 CLCD Driver -========================================== +==================================================== + drm/pl111 ARM PrimeCell PL110 and PL111 CLCD Driver +==================================================== .. kernel-doc:: drivers/gpu/drm/pl111/pl111_drv.c - :doc: ARM PrimeCell PL111 CLCD Driver + :doc: ARM PrimeCell PL110 and PL111 CLCD Driver diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 7969f106877d..b0ea17da8ff6 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -403,6 +403,52 @@ Contact: Emil Velikov, respective driver maintainers Level: Intermediate +Plumb drm_atomic_state all over +------------------------------- + +Currently various atomic functions take just a single or a handful of +object states (eg. plane state). While that single object state can +suffice for some simple cases, we often have to dig out additional +object states for dealing with various dependencies between the individual +objects or the hardware they represent. The process of digging out the +additional states is rather non-intuitive and error prone. + +To fix that most functions should rather take the overall +drm_atomic_state as one of their parameters. The other parameters +would generally be the object(s) we mainly want to interact with. + +For example, instead of + +.. code-block:: c + + int (*atomic_check)(struct drm_plane *plane, struct drm_plane_state *state); + +we would have something like + +.. code-block:: c + + int (*atomic_check)(struct drm_plane *plane, struct drm_atomic_state *state); + +The implementation can then trivially gain access to any required object +state(s) via drm_atomic_get_plane_state(), drm_atomic_get_new_plane_state(), +drm_atomic_get_old_plane_state(), and their equivalents for +other object types. + +Additionally many drivers currently access the object->state pointer +directly in their commit functions. That is not going to work if we +eg. want to allow deeper commit pipelines as those pointers could +then point to the states corresponding to a future commit instead of +the current commit we're trying to process. Also non-blocking commits +execute locklessly so there are serious concerns with dereferencing +the object->state pointers without holding the locks that protect them. +Use of drm_atomic_get_new_plane_state(), drm_atomic_get_old_plane_state(), +etc. avoids these problems as well since they relate to a specific +commit via the passed in drm_atomic_state. + +Contact: Ville Syrjälä, Daniel Vetter + +Level: Intermediate + Core refactorings ================= diff --git a/Documentation/hwmon/abituguru-datasheet.rst b/Documentation/hwmon/abituguru-datasheet.rst index 6d5253e2223b..0cd61471d2a2 100644 --- a/Documentation/hwmon/abituguru-datasheet.rst +++ b/Documentation/hwmon/abituguru-datasheet.rst @@ -68,7 +68,7 @@ See below for all known bank addresses, numbers of sensors in that bank, number of bytes data per sensor and contents/meaning of those bytes. Although both this document and the kernel driver have kept the sensor -terminoligy for the addressing within a bank this is not 100% correct, in +terminology for the addressing within a bank this is not 100% correct, in bank 0x24 for example the addressing within the bank selects a PWM output not a sensor. @@ -155,7 +155,7 @@ After wider testing of the Linux kernel driver some variants of the uGuru have turned up which do not hold 0x08 at DATA within 250 reads after writing the bank address. With these versions this happens quite frequent, using larger timeouts doesn't help, they just go offline for a second or 2, doing some -internal callibration or whatever. Your code should be prepared to handle +internal calibration or whatever. Your code should be prepared to handle this and in case of no response in this specific case just goto sleep for a while and then retry. @@ -331,6 +331,6 @@ the voltage / clock programming out, I tried reading and only reading banks 0-0x30 with the reading code used for the sensor banks (0x20-0x28) and this resulted in a _permanent_ reprogramming of the voltages, luckily I had the sensors part configured so that it would shutdown my system on any out of spec -voltages which proprably safed my computer (after a reboot I managed to +voltages which probably safed my computer (after a reboot I managed to immediately enter the bios and reload the defaults). This probably means that the read/write cycle for the non sensor part is different from the sensor part. diff --git a/Documentation/hwmon/abituguru.rst b/Documentation/hwmon/abituguru.rst index d8243c827de9..cfda60b757ce 100644 --- a/Documentation/hwmon/abituguru.rst +++ b/Documentation/hwmon/abituguru.rst @@ -17,7 +17,7 @@ Supported chips: Note: The uGuru is a microcontroller with onboard firmware which programs it to behave as a hwmon IC. There are many different revisions of the - firmware and thus effectivly many different revisions of the uGuru. + firmware and thus effectively many different revisions of the uGuru. Below is an incomplete list with which revisions are used for which Motherboards: @@ -33,7 +33,7 @@ Supported chips: sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's this does not always work. For these uGuru's the autodetection can be overridden with the bank1_types module param. For all 3 known - revison 1 motherboards the correct use of this param is: + revision 1 motherboards the correct use of this param is: bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 You may also need to specify the fan_sensors option for these boards fan_sensors=5 diff --git a/Documentation/hwmon/abituguru3.rst b/Documentation/hwmon/abituguru3.rst index 514f11f41e8b..88046d866385 100644 --- a/Documentation/hwmon/abituguru3.rst +++ b/Documentation/hwmon/abituguru3.rst @@ -13,7 +13,7 @@ Supported chips: Note: The uGuru is a microcontroller with onboard firmware which programs it to behave as a hwmon IC. There are many different revisions of the - firmware and thus effectivly many different revisions of the uGuru. + firmware and thus effectively many different revisions of the uGuru. Below is an incomplete list with which revisions are used for which Motherboards: @@ -24,7 +24,7 @@ Supported chips: - uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X, AW9D-MAX) - The abituguru3 driver is only for revison 3.0.x.x motherboards, + The abituguru3 driver is only for revision 3.0.x.x motherboards, this driver will not work on older motherboards. For older motherboards use the abituguru (without the 3 !) driver. diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst new file mode 100644 index 000000000000..9257f8a48650 --- /dev/null +++ b/Documentation/hwmon/adm1266.rst @@ -0,0 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver adm1266 +===================== + +Supported chips: + * Analog Devices ADM1266 + Prefix: 'adm1266' + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf + +Author: Alexandru Tachici <alexandru.tachici@analog.com> + + +Description +----------- + +This driver supports hardware monitoring for Analog Devices ADM1266 sequencer. + +ADM1266 is a sequencer that features voltage readback from 17 channels via an +integrated 12 bit SAR ADC, accessed using a PMBus interface. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write, history reset +attributes are write-only, all other attributes are read-only. + +inX_label "voutx" +inX_input Measured voltage. +inX_min Minimum Voltage. +inX_max Maximum voltage. +inX_min_alarm Voltage low alarm. +inX_max_alarm Voltage high alarm. diff --git a/Documentation/hwmon/amd_energy.rst b/Documentation/hwmon/amd_energy.rst index f8288edff664..86e4ebc5cbc2 100644 --- a/Documentation/hwmon/amd_energy.rst +++ b/Documentation/hwmon/amd_energy.rst @@ -84,6 +84,11 @@ per run to a respective 64-bit counter. The kernel thread starts running during probe, wakes up every 100secs and stops running when driver is removed. +Frequency of the accumulator thread is set during the probe +based on the chosen energy unit resolution. For example +A. fine grain (1.625 micro J) +B. course grain (0.125 milli J) + A socket and core energy read would return the current register value added to the respective energy accumulator. diff --git a/Documentation/hwmon/drivetemp.rst b/Documentation/hwmon/drivetemp.rst index 2d37d049247f..0b1cf2f912c5 100644 --- a/Documentation/hwmon/drivetemp.rst +++ b/Documentation/hwmon/drivetemp.rst @@ -30,6 +30,24 @@ Transport is not supported, the driver uses SMART attributes to read the drive temperature. +Usage Note +---------- + +Reading the drive temperature may reset the spin down timer on some drives. +This has been observed with WD120EFAX drives, but may be seen with other +drives as well. The same behavior is observed if the 'hdtemp' or 'smartd' +tools are used to access the drive. +With the WD120EFAX drive, reading the drive temperature using the drivetemp +driver is still possible _after_ it transitioned to standby mode, and +reading the drive temperature in this mode will not cause the drive to +change its mode (meaning the drive will not spin up). It is unknown if other +drives experience similar behavior. + +A known workaround for WD120EFAX drives is to read the drive temperature at +intervals larger than twice the spin-down time. Otherwise affected drives +will never spin down. + + Sysfs entries ------------- diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 750d3a975d82..e6b91ab12978 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -30,6 +30,7 @@ Hardware Monitoring Kernel Drivers adm1026 adm1031 adm1177 + adm1266 adm1275 adm9240 ads7828 @@ -73,6 +74,7 @@ Hardware Monitoring Kernel Drivers ina209 ina2xx ina3221 + intel-m10-bmc-hwmon ir35221 ir38064 isl68137 @@ -154,10 +156,12 @@ Hardware Monitoring Kernel Drivers sht3x shtc1 sis5595 + sl28cpld smm665 smsc47b397 smsc47m192 smsc47m1 + sparx5-temp tc654 tc74 thmc50 diff --git a/Documentation/hwmon/intel-m10-bmc-hwmon.rst b/Documentation/hwmon/intel-m10-bmc-hwmon.rst new file mode 100644 index 000000000000..3d148c6e3256 --- /dev/null +++ b/Documentation/hwmon/intel-m10-bmc-hwmon.rst @@ -0,0 +1,78 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver intel-m10-bmc-hwmon +================================= + +Supported chips: + + * Intel MAX 10 BMC for Intel PAC N3000 + + Prefix: 'n3000bmc-hwmon' + +Author: Xu Yilun <yilun.xu@intel.com> + + +Description +----------- + +This driver adds the temperature, voltage, current and power reading +support for the Intel MAX 10 Board Management Controller (BMC) chip. +The BMC chip is integrated in some Intel Programmable Acceleration +Cards (PAC). It connects to a set of sensor chips to monitor the +sensor data of different components on the board. The BMC firmware is +responsible for sensor data sampling and recording in shared +registers. The host driver reads the sensor data from these shared +registers and exposes them to users as hwmon interfaces. + +The BMC chip is implemented using the Intel MAX 10 CPLD. It could be +reprogramed to some variants in order to support different Intel +PACs. The driver is designed to be able to distinguish between the +variants, but now it only supports the BMC for Intel PAC N3000. + + +Sysfs attributes +---------------- + +The following attributes are supported: + +- Intel MAX 10 BMC for Intel PAC N3000: + +======================= ======================================================= +tempX_input Temperature of the component (specified by tempX_label) +tempX_max Temperature maximum setpoint of the component +tempX_crit Temperature critical setpoint of the component +tempX_max_hyst Hysteresis for temperature maximum of the component +tempX_crit_hyst Hysteresis for temperature critical of the component +temp1_label "Board Temperature" +temp2_label "FPGA Die Temperature" +temp3_label "QSFP0 Temperature" +temp4_label "QSFP1 Temperature" +temp5_label "Retimer A Temperature" +temp6_label "Retimer A SerDes Temperature" +temp7_label "Retimer B Temperature" +temp8_label "Retimer B SerDes Temperature" + +inX_input Measured voltage of the component (specified by + inX_label) +in0_label "QSFP0 Supply Voltage" +in1_label "QSFP1 Supply Voltage" +in2_label "FPGA Core Voltage" +in3_label "12V Backplane Voltage" +in4_label "1.2V Voltage" +in5_label "12V AUX Voltage" +in6_label "1.8V Voltage" +in7_label "3.3V Voltage" + +currX_input Measured current of the component (specified by + currX_label) +curr1_label "FPGA Core Current" +curr2_label "12V Backplane Current" +curr3_label "12V AUX Current" + +powerX_input Measured power of the component (specified by + powerX_label) +power1_label "Board Power" + +======================= ======================================================= + +All the attributes are read-only. diff --git a/Documentation/hwmon/ltc2945.rst b/Documentation/hwmon/ltc2945.rst index 20c884985367..8d65c141ce2b 100644 --- a/Documentation/hwmon/ltc2945.rst +++ b/Documentation/hwmon/ltc2945.rst @@ -11,7 +11,7 @@ Supported chips: Datasheet: - http://cds.linear.com/docs/en/datasheet/2945fa.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2945fb.pdf Author: Guenter Roeck <linux@roeck-us.net> diff --git a/Documentation/hwmon/mp2975.rst b/Documentation/hwmon/mp2975.rst new file mode 100644 index 000000000000..5b0609c62f48 --- /dev/null +++ b/Documentation/hwmon/mp2975.rst @@ -0,0 +1,116 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2975 +==================== + +Supported chips: + + * MPS MP12254 + + Prefix: 'mp2975' + +Author: + + Vadim Pasternak <vadimp@nvidia.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +vendor dual-loop, digital, multi-phase controller MP2975. + +This device: +- Supports up to two power rail. +- Provides 8 pulse-width modulations (PWMs), and can be configured up + to 8-phase operation for rail 1 and up to 4-phase operation for rail + 2. +- Supports two pages 0 and 1 for telemetry and also pages 2 and 3 for + configuration. +- Can configured VOUT readout in direct or VID format and allows + setting of different formats on rails 1 and 2. For VID the following + protocols are available: VR13 mode with 5-mV DAC; VR13 mode with + 10-mV DAC, IMVP9 mode with 5-mV DAC. + +Device supports: +- SVID interface. +- AVSBus interface. + +Device complaint with: +- PMBus rev 1.3 interface. + +Device supports direct format for reading output current, output voltage, +input and output power and temperature. +Device supports linear format for reading input voltage and input power. +Device supports VID and direct formats for reading output voltage. +The below VID modes are supported: VR12, VR13, IMVP9. + +The driver provides the next attributes for the current: +- for current in: input, maximum alarm; +- for current out input, maximum alarm and highest values; +- for phase current: input and label. +attributes. +The driver exports the following attributes via the 'sysfs' files, where +- 'n' is number of telemetry pages (from 1 to 2); +- 'k' is number of configured phases (from 1 to 8); +- indexes 1, 1*n for "iin"; +- indexes n+1, n+2 for "iout"; +- indexes 2*n+1 ... 2*n + k for phases. + +**curr[1-{2n}]_alarm** + +**curr[{n+1}-{n+2}]_highest** + +**curr[1-{2n+k}]_input** + +**curr[1-{2n+k}]_label** + +The driver provides the next attributes for the voltage: +- for voltage in: input, high critical threshold, high critical alarm, all only + from page 0; +- for voltage out: input, low and high critical thresholds, low and high + critical alarms, from pages 0 and 1; +The driver exports the following attributes via the 'sysfs' files, where +- 'n' is number of telemetry pages (from 1 to 2); +- indexes 1 for "iin"; +- indexes n+1, n+2 for "vout"; + +**in[1-{2n+1}]_crit** + +**in[1-{2n+1}]_crit_alarm** + +**in[1-{2n+1}]_input** + +**in[1-{2n+1}]_label** + +**in[2-{n+1}]_lcrit** + +**in[2-{n+1}1_lcrit_alarm** + +The driver provides the next attributes for the power: +- for power in alarm and input. +- for power out: highest and input. +The driver exports the following attributes via the 'sysfs' files, where +- 'n' is number of telemetry pages (from 1 to 2); +- indexes 1 for "pin"; +- indexes n+1, n+2 for "pout"; + +**power1_alarm** + +**power[2-{n+1}]_highest** + +**power[1-{2n+1}]_input** + +**power[1-{2n+1}]_label** + +The driver provides the next attributes for the temperature (only from page 0): + + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_input** + +**temp1_max** + +**temp1_max_alarm** diff --git a/Documentation/hwmon/pmbus-core.rst b/Documentation/hwmon/pmbus-core.rst index 501b37b0610d..e22c4f6808bc 100644 --- a/Documentation/hwmon/pmbus-core.rst +++ b/Documentation/hwmon/pmbus-core.rst @@ -270,8 +270,7 @@ obtain the chip status. Therefore, it must _not_ be called from that function. :: - int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, - struct pmbus_driver_info *info); + int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info); Execute probe function. Similar to standard probe function for other drivers, with the pointer to struct pmbus_driver_info as additional argument. Calls diff --git a/Documentation/hwmon/pmbus.rst b/Documentation/hwmon/pmbus.rst index 66b3e894612f..fb3ad67dedc1 100644 --- a/Documentation/hwmon/pmbus.rst +++ b/Documentation/hwmon/pmbus.rst @@ -143,10 +143,9 @@ Emerson DS1200 power modules might look as follows:: | PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12, }; - static int ds1200_probe(struct i2c_client *client, - const struct i2c_device_id *id) + static int ds1200_probe(struct i2c_client *client) { - return pmbus_do_probe(client, id, &ds1200_info); + return pmbus_do_probe(client, &ds1200_info); } static int ds1200_remove(struct i2c_client *client) @@ -166,7 +165,7 @@ Emerson DS1200 power modules might look as follows:: .driver = { .name = "ds1200", }, - .probe = ds1200_probe, + .probe_new = ds1200_probe, .remove = ds1200_remove, .id_table = ds1200_id, }; @@ -211,6 +210,10 @@ inX_lcrit_alarm Voltage critical low alarm. inX_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. inX_label "vin", "vcap", or "voutY" +inX_rated_min Minimum rated voltage. + From MFR_VIN_MIN or MFR_VOUT_MIN register. +inX_rated_max Maximum rated voltage. + From MFR_VIN_MAX or MFR_VOUT_MAX register. currX_input Measured current. From READ_IIN or READ_IOUT register. currX_max Maximum current. @@ -230,6 +233,8 @@ currX_crit_alarm Current critical high alarm. currX_label "iin", "iinY", "iinY.Z", "ioutY", or "ioutY.Z", where Y reflects the page number and Z reflects the phase. +currX_rated_max Maximum rated current. + From MFR_IIN_MAX or MFR_IOUT_MAX register. powerX_input Measured power. From READ_PIN or READ_POUT register. powerX_cap Output power cap. From POUT_MAX register. @@ -244,10 +249,12 @@ powerX_crit_alarm Output power critical high alarm. powerX_label "pin", "pinY", "pinY.Z", "poutY", or "poutY.Z", where Y reflects the page number and Z reflects the phase. +powerX_rated_max Maximum rated power. + From MFR_PIN_MAX or MFR_POUT_MAX register. tempX_input Measured temperature. From READ_TEMPERATURE_X register. -tempX_min Mimimum temperature. From UT_WARN_LIMIT register. +tempX_min Minimum temperature. From UT_WARN_LIMIT register. tempX_max Maximum temperature. From OT_WARN_LIMIT register. tempX_lcrit Critical low temperature. From UT_FAULT_LIMIT register. @@ -265,4 +272,9 @@ tempX_lcrit_alarm Chip temperature critical low alarm. Set by comparing tempX_crit_alarm Chip temperature critical high alarm. Set by comparing READ_TEMPERATURE_X with OT_FAULT_LIMIT if TEMP_OT_FAULT status is set. +tempX_rated_min Minimum rated temperature. + From MFR_TAMBIENT_MIN register. +tempX_rated_max Maximum rated temperature. + From MFR_TAMBIENT_MAX, MFR_MAX_TEMP_1, MFR_MAX_TEMP_2 or + MFR_MAX_TEMP_3 register. ======================= ======================================================== diff --git a/Documentation/hwmon/sl28cpld.rst b/Documentation/hwmon/sl28cpld.rst new file mode 100644 index 000000000000..7ed65f78250c --- /dev/null +++ b/Documentation/hwmon/sl28cpld.rst @@ -0,0 +1,36 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver sl28cpld +====================== + +Supported chips: + + * Kontron sl28cpld + + Prefix: 'sl28cpld' + + Datasheet: not available + +Authors: Michael Walle <michael@walle.cc> + +Description +----------- + +The sl28cpld is a board management controller which also exposes a hardware +monitoring controller. At the moment this controller supports a single fan +supervisor. In the future there might be other flavours and additional +hardware monitoring might be supported. + +The fan supervisor has a 7 bit counter register and a counter period of 1 +second. If the 7 bit counter overflows, the supervisor will automatically +switch to x8 mode to support a wider input range at the loss of +granularity. + +Sysfs entries +------------- + +The following attributes are supported. + +======================= ======================================================== +fan1_input Fan RPM. Assuming 2 pulses per revolution. +======================= ======================================================== diff --git a/Documentation/hwmon/sysfs-interface.rst b/Documentation/hwmon/sysfs-interface.rst index fd590633bb14..678c9c60b5a3 100644 --- a/Documentation/hwmon/sysfs-interface.rst +++ b/Documentation/hwmon/sysfs-interface.rst @@ -241,6 +241,20 @@ Voltages Affects the way the driver calculates the CPU core reference voltage from the vid pins. +`in[0-*]_rated_min` + Minimum rated voltage. + + Unit: millivolt + + RO + +`in[0-*]_rated_max` + Maximum rated voltage. + + Unit: millivolt + + RO + Also see the Alarms section for status flags associated with voltages. @@ -574,6 +588,20 @@ Temperatures RW +`temp[1-*]_rated_min` + Minimum rated temperature. + + Unit: millidegree Celsius + + RO + +`temp[1-*]_rated_max` + Maximum rated temperature. + + Unit: millidegree Celsius + + RO + Some chips measure temperature using external thermistors and an ADC, and report the temperature measurement as a voltage. Converting this voltage back to a temperature (or the other way around for limits) requires @@ -664,6 +692,20 @@ Currents RW +`curr[1-*]_rated_min` + Minimum rated current. + + Unit: milliampere + + RO + +`curr[1-*]_rated_max` + Maximum rated current. + + Unit: milliampere + + RO + Also see the Alarms section for status flags associated with currents. ***** @@ -830,6 +872,20 @@ Power RW +`power[1-*]_rated_min` + Minimum rated power. + + Unit: microWatt + + RO + +`power[1-*]_rated_max` + Maximum rated power. + + Unit: microWatt + + RO + Also see the Alarms section for status flags associated with power readings. ****** @@ -877,6 +933,20 @@ Humidity RW +`humidity[1-*]_rated_min` + Minimum rated humidity. + + Unit: milli-percent (per cent mille, pcm) + + RO + +`humidity[1-*]_rated_max` + Maximum rated humidity. + + Unit: milli-percent (per cent mille, pcm) + + RO + ****** Alarms ****** diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst index faf32330c335..42bbdd6e7fd8 100644 --- a/Documentation/i2c/busses/i2c-i801.rst +++ b/Documentation/i2c/busses/i2c-i801.rst @@ -44,6 +44,7 @@ Supported adapters: * Intel Tiger Lake (PCH) * Intel Jasper Lake (SOC) * Intel Emmitsburg (PCH) + * Intel Alder Lake (PCH) Datasheets: Publicly available at the Intel website diff --git a/Documentation/i2c/index.rst b/Documentation/i2c/index.rst index 8a2ad3845191..8b76217e370a 100644 --- a/Documentation/i2c/index.rst +++ b/Documentation/i2c/index.rst @@ -47,6 +47,7 @@ Slave I2C slave-interface slave-eeprom-backend + slave-testunit-backend Advanced topics =============== diff --git a/Documentation/i2c/slave-testunit-backend.rst b/Documentation/i2c/slave-testunit-backend.rst new file mode 100644 index 000000000000..2c38e64f0bac --- /dev/null +++ b/Documentation/i2c/slave-testunit-backend.rst @@ -0,0 +1,69 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +Linux I2C slave testunit backend +================================ + +by Wolfram Sang <wsa@sang-engineering.com> in 2020 + +This backend can be used to trigger test cases for I2C bus masters which +require a remote device with certain capabilities (and which are usually not so +easy to obtain). Examples include multi-master testing, and SMBus Host Notify +testing. For some tests, the I2C slave controller must be able to switch +between master and slave mode because it needs to send data, too. + +Note that this is a device for testing and debugging. It should not be enabled +in a production build. And while there is some versioning and we try hard to +keep backward compatibility, there is no stable ABI guaranteed! + +Instantiating the device is regular. Example for bus 0, address 0x30: + +# echo "slave-testunit 0x1030" > /sys/bus/i2c/devices/i2c-0/new_device + +After that, you will have a write-only device listening. Reads will just return +an 8-bit version number of the testunit. When writing, the device consists of 4 +8-bit registers and all must be written to start a testcase, i.e. you must +always write 4 bytes to the device. The registers are: + +0x00 CMD - which test to trigger +0x01 DATAL - configuration byte 1 for the test +0x02 DATAH - configuration byte 2 for the test +0x03 DELAY - delay in n * 10ms until test is started + +Using 'i2cset' from the i2c-tools package, the generic command looks like: + +# i2cset -y <bus_num> <testunit_address> <CMD> <DATAL> <DATAH> <DELAY> i + +DELAY is a generic parameter which will delay the execution of the test in CMD. +While a command is running (including the delay), new commands will not be +acknowledged. You need to wait until the old one is completed. + +The commands are described in the following section. An invalid command will +result in the transfer not being acknowledged. + +Commands +-------- + +0x00 NOOP (reserved for future use) + +0x01 READ_BYTES (also needs master mode) + DATAL - address to read data from (lower 7 bits, highest bit currently unused) + DATAH - number of bytes to read + +This is useful to test if your bus master driver is handling multi-master +correctly. You can trigger the testunit to read bytes from another device on +the bus. If the bus master under test also wants to access the bus at the same +time, the bus will be busy. Example to read 128 bytes from device 0x50 after +50ms of delay: + +# i2cset -y 0 0x30 0x01 0x50 0x80 0x05 i + +0x02 SMBUS_HOST_NOTIFY (also needs master mode) + DATAL - low byte of the status word to send + DATAH - high byte of the status word to send + +This test will send an SMBUS_HOST_NOTIFY message to the host. Note that the +status word is currently ignored in the Linux Kernel. Example to send a +notification after 10ms: + +# i2cset -y 0 0x30 0x02 0x42 0x64 0x01 i diff --git a/Documentation/ia64/index.rst b/Documentation/ia64/index.rst index 0436e1034115..4bdfe28067ee 100644 --- a/Documentation/ia64/index.rst +++ b/Documentation/ia64/index.rst @@ -15,4 +15,3 @@ IA-64 Architecture irq-redir mca serial - xen diff --git a/Documentation/ia64/xen.rst b/Documentation/ia64/xen.rst deleted file mode 100644 index 831339c74441..000000000000 --- a/Documentation/ia64/xen.rst +++ /dev/null @@ -1,206 +0,0 @@ -******************************************************** -Recipe for getting/building/running Xen/ia64 with pv_ops -******************************************************** -This recipe describes how to get xen-ia64 source and build it, -and run domU with pv_ops. - -Requirements -============ - - - python - - mercurial - it (aka "hg") is an open-source source code - management software. See the below. - http://www.selenic.com/mercurial/wiki/ - - git - - bridge-utils - -Getting and Building Xen and Dom0 -================================= - - My environment is: - - - Machine : Tiger4 - - Domain0 OS : RHEL5 - - DomainU OS : RHEL5 - - 1. Download source:: - - # hg clone http://xenbits.xensource.com/ext/ia64/xen-unstable.hg - # cd xen-unstable.hg - # hg clone http://xenbits.xensource.com/ext/ia64/linux-2.6.18-xen.hg - - 2. # make world - - 3. # make install-tools - - 4. copy kernels and xen:: - - # cp xen/xen.gz /boot/efi/efi/redhat/ - # cp build-linux-2.6.18-xen_ia64/vmlinux.gz \ - /boot/efi/efi/redhat/vmlinuz-2.6.18.8-xen - - 5. make initrd for Dom0/DomU:: - - # make -C linux-2.6.18-xen.hg ARCH=ia64 modules_install \ - O=$(pwd)/build-linux-2.6.18-xen_ia64 - # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6.18.8-xen.img \ - 2.6.18.8-xen --builtin mptspi --builtin mptbase \ - --builtin mptscsih --builtin uhci-hcd --builtin ohci-hcd \ - --builtin ehci-hcd - -Making a disk image for guest OS -================================ - - 1. make file:: - - # dd if=/dev/zero of=/root/rhel5.img bs=1M seek=4096 count=0 - # mke2fs -F -j /root/rhel5.img - # mount -o loop /root/rhel5.img /mnt - # cp -ax /{dev,var,etc,usr,bin,sbin,lib} /mnt - # mkdir /mnt/{root,proc,sys,home,tmp} - - Note: You may miss some device files. If so, please create them - with mknod. Or you can use tar instead of cp. - - 2. modify DomU's fstab:: - - # vi /mnt/etc/fstab - /dev/xvda1 / ext3 defaults 1 1 - none /dev/pts devpts gid=5,mode=620 0 0 - none /dev/shm tmpfs defaults 0 0 - none /proc proc defaults 0 0 - none /sys sysfs defaults 0 0 - - 3. modify inittab - - set runlevel to 3 to avoid X trying to start:: - - # vi /mnt/etc/inittab - id:3:initdefault: - - Start a getty on the hvc0 console:: - - X0:2345:respawn:/sbin/mingetty hvc0 - - tty1-6 mingetty can be commented out - - 4. add hvc0 into /etc/securetty:: - - # vi /mnt/etc/securetty (add hvc0) - - 5. umount:: - - # umount /mnt - -FYI, virt-manager can also make a disk image for guest OS. -It's GUI tools and easy to make it. - -Boot Xen & Domain0 -================== - - 1. replace elilo - elilo of RHEL5 can boot Xen and Dom0. - If you use old elilo (e.g RHEL4), please download from the below - http://elilo.sourceforge.net/cgi-bin/blosxom - and copy into /boot/efi/efi/redhat/:: - - # cp elilo-3.6-ia64.efi /boot/efi/efi/redhat/elilo.efi - - 2. modify elilo.conf (like the below):: - - # vi /boot/efi/efi/redhat/elilo.conf - prompt - timeout=20 - default=xen - relocatable - - image=vmlinuz-2.6.18.8-xen - label=xen - vmm=xen.gz - initrd=initrd-2.6.18.8-xen.img - read-only - append=" -- rhgb root=/dev/sda2" - -The append options before "--" are for xen hypervisor, -the options after "--" are for dom0. - -FYI, your machine may need console options like -"com1=19200,8n1 console=vga,com1". For example, -append="com1=19200,8n1 console=vga,com1 -- rhgb console=tty0 \ -console=ttyS0 root=/dev/sda2" - -Getting and Building domU with pv_ops -===================================== - - 1. get pv_ops tree:: - - # git clone http://people.valinux.co.jp/~yamahata/xen-ia64/linux-2.6-xen-ia64.git/ - - 2. git branch (if necessary):: - - # cd linux-2.6-xen-ia64/ - # git checkout -b your_branch origin/xen-ia64-domu-minimal-2008may19 - - Note: - The current branch is xen-ia64-domu-minimal-2008may19. - But you would find the new branch. You can see with - "git branch -r" to get the branch lists. - - http://people.valinux.co.jp/~yamahata/xen-ia64/for_eagl/linux-2.6-ia64-pv-ops.git/ - - is also available. - - The tree is based on - - git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 test) - - 3. copy .config for pv_ops of domU:: - - # cp arch/ia64/configs/xen_domu_wip_defconfig .config - - 4. make kernel with pv_ops:: - - # make oldconfig - # make - - 5. install the kernel and initrd:: - - # cp vmlinux.gz /boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU - # make modules_install - # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img \ - 2.6.26-rc3xen-ia64-08941-g1b12161 --builtin mptspi \ - --builtin mptbase --builtin mptscsih --builtin uhci-hcd \ - --builtin ohci-hcd --builtin ehci-hcd - -Boot DomainU with pv_ops -======================== - - 1. make config of DomU:: - - # vi /etc/xen/rhel5 - kernel = "/boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU" - ramdisk = "/boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img" - vcpus = 1 - memory = 512 - name = "rhel5" - disk = [ 'file:/root/rhel5.img,xvda1,w' ] - root = "/dev/xvda1 ro" - extra= "rhgb console=hvc0" - - 2. After boot xen and dom0, start xend:: - - # /etc/init.d/xend start - - ( In the debugging case, `# XEND_DEBUG=1 xend trace_start` ) - - 3. start domU:: - - # xm create -c rhel5 - -Reference -========= -- Wiki of Xen/IA64 upstream merge - http://wiki.xensource.com/xenwiki/XenIA64/UpstreamMerge - -Written by Akio Takebe <takebe_akio@jp.fujitsu.com> on 28 May 2008 diff --git a/Documentation/iio/iio_configfs.rst b/Documentation/iio/iio_configfs.rst index 6e38cbbd2981..3a5d76f9e2b9 100644 --- a/Documentation/iio/iio_configfs.rst +++ b/Documentation/iio/iio_configfs.rst @@ -53,7 +53,7 @@ kernel module following the interface in include/linux/iio/sw_trigger.h:: */ } - static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt) + static int iio_trig_sample_remove(struct iio_sw_trigger *swt) { /* * This undoes the actions in iio_trig_sample_probe diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst index 2aac50b97921..cf3ca236d2cc 100644 --- a/Documentation/kbuild/llvm.rst +++ b/Documentation/kbuild/llvm.rst @@ -1,3 +1,5 @@ +.. _kbuild_llvm: + ============================== Building Linux with Clang/LLVM ============================== @@ -23,8 +25,8 @@ supports C and the GNU C extensions required by the kernel, and is pronounced Clang ----- -The compiler used can be swapped out via `CC=` command line argument to `make`. -`CC=` should be set when selecting a config and during a build. +The compiler used can be swapped out via ``CC=`` command line argument to ``make``. +``CC=`` should be set when selecting a config and during a build. :: make CC=clang defconfig @@ -34,33 +36,33 @@ Cross Compiling --------------- A single Clang compiler binary will typically contain all supported backends, -which can help simplify cross compiling. +which can help simplify cross compiling. :: ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CC=clang -`CROSS_COMPILE` is not used to prefix the Clang compiler binary, instead -`CROSS_COMPILE` is used to set a command line flag: `--target <triple>`. For -example: +``CROSS_COMPILE`` is not used to prefix the Clang compiler binary, instead +``CROSS_COMPILE`` is used to set a command line flag: ``--target=<triple>``. For +example: :: - clang --target aarch64-linux-gnu foo.c + clang --target=aarch64-linux-gnu foo.c LLVM Utilities -------------- -LLVM has substitutes for GNU binutils utilities. Kbuild supports `LLVM=1` -to enable them. +LLVM has substitutes for GNU binutils utilities. Kbuild supports ``LLVM=1`` +to enable them. :: make LLVM=1 -They can be enabled individually. The full list of the parameters: +They can be enabled individually. The full list of the parameters: :: - make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\ - OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \\ - READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \\ + make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \ + OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \ + READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \ HOSTLD=ld.lld Currently, the integrated assembler is disabled by default. You can pass -`LLVM_IAS=1` to enable it. +``LLVM_IAS=1`` to enable it. Getting Help ------------ @@ -73,6 +75,8 @@ Getting Help - `Wiki <https://github.com/ClangBuiltLinux/linux/wiki>`_ - `Beginner Bugs <https://github.com/ClangBuiltLinux/linux/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+issue%22>`_ +.. _getting_llvm: + Getting LLVM ------------- diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index b81b8913a5a3..0d5dd5413af0 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -16,11 +16,12 @@ This document describes the Linux kernel Makefiles. --- 3.5 Library file goals - lib-y --- 3.6 Descending down in directories --- 3.7 Compilation flags - --- 3.8 Command line dependency + --- 3.8 <deleted> --- 3.9 Dependency tracking --- 3.10 Special Rules --- 3.11 $(CC) support functions --- 3.12 $(LD) support functions + --- 3.13 Script Invocation === 4 Host Program support --- 4.1 Simple Host Program @@ -39,8 +40,8 @@ This document describes the Linux kernel Makefiles. === 7 Architecture Makefiles --- 7.1 Set variables to tweak the build to the architecture - --- 7.2 Add prerequisites to archheaders: - --- 7.3 Add prerequisites to archprepare: + --- 7.2 Add prerequisites to archheaders + --- 7.3 Add prerequisites to archprepare --- 7.4 List directories to visit when descending --- 7.5 Architecture-specific boot images --- 7.6 Building non-kbuild targets @@ -129,7 +130,7 @@ The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can be used and if both a 'Makefile' and a 'Kbuild' file exists, then the 'Kbuild' file will be used. -Section 3.1 "Goal definitions" is a quick intro, further chapters provide +Section 3.1 "Goal definitions" is a quick intro; further chapters provide more details, with real examples. 3.1 Goal definitions @@ -605,6 +606,25 @@ more details, with real examples. #Makefile LDFLAGS_vmlinux += $(call ld-option, -X) +3.13 Script invocation +---------------------- + + Make rules may invoke scripts to build the kernel. The rules shall + always provide the appropriate interpreter to execute the script. They + shall not rely on the execute bits being set, and shall not invoke the + script directly. For the convenience of manual script invocation, such + as invoking ./scripts/checkpatch.pl, it is recommended to set execute + bits on the scripts nonetheless. + + Kbuild provides variables $(CONFIG_SHELL), $(AWK), $(PERL), + $(PYTHON) and $(PYTHON3) to refer to interpreters for the respective + scripts. + + Example:: + + #Makefile + cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \ + $(KERNELRELEASE) 4 Host Program support ====================== @@ -965,7 +985,7 @@ When kbuild executes, the following steps are followed (roughly): KBUILD_LDFLAGS := -m elf_s390 Note: ldflags-y can be used to further customise - the flags used. See chapter 3.7. + the flags used. See section 3.7. LDFLAGS_vmlinux Options for $(LD) when linking vmlinux @@ -1121,7 +1141,7 @@ When kbuild executes, the following steps are followed (roughly): In this example, the file target maketools will be processed before descending down in the subdirectories. - See also chapter XXX-TODO that describe how kbuild supports + See also chapter XXX-TODO that describes how kbuild supports generating offset header files. @@ -1261,7 +1281,7 @@ When kbuild executes, the following steps are followed (roughly): always be built. Assignments to $(targets) are without $(obj)/ prefix. if_changed may be used in conjunction with custom commands as - defined in 6.8 "Custom kbuild commands". + defined in 7.8 "Custom kbuild commands". Note: It is a typical mistake to forget the FORCE prerequisite. Another common pitfall is that whitespace is sometimes @@ -1411,7 +1431,7 @@ When kbuild executes, the following steps are followed (roughly): that may be shared between individual architectures. The recommended approach how to use a generic header file is to list the file in the Kbuild file. - See "7.2 generic-y" for further info on syntax etc. + See "8.2 generic-y" for further info on syntax etc. 7.11 Post-link pass ------------------- @@ -1601,4 +1621,4 @@ is the right choice. - Describe how kbuild supports shipped files with _shipped. - Generating offset header files. -- Add more variables to section 7? +- Add more variables to chapters 7 or 9? diff --git a/Documentation/leds/ledtrig-transient.rst b/Documentation/leds/ledtrig-transient.rst index eedfa1626e8a..63072f310660 100644 --- a/Documentation/leds/ledtrig-transient.rst +++ b/Documentation/leds/ledtrig-transient.rst @@ -17,12 +17,6 @@ set a timer to hold a state, however when user space application crashes or goes away without deactivating the timer, the hardware will be left in that state permanently. -As a specific example of this use-case, let's look at vibrate feature on -phones. Vibrate function on phones is implemented using PWM pins on SoC or -PMIC. There is a need to activate one shot timer to control the vibrate -feature, to prevent user space crashes leaving the phone in vibrate mode -permanently causing the battery to drain. - Transient trigger addresses the need for one shot timer activation. The transient trigger can be enabled and disabled just like the other leds triggers. @@ -159,7 +153,6 @@ repeat the following step as needed:: This trigger is intended to be used for the following example use cases: - - Control of vibrate (phones, tablets etc.) hardware by user space app. - Use of LED by user space app as activity indicator. - Use of LED by user space app as a kind of watchdog indicator -- as long as the app is alive, it can keep the LED illuminated, if it dies diff --git a/Documentation/locking/lockdep-design.rst b/Documentation/locking/lockdep-design.rst index 23fcbc4d3fc0..cec03bd1294a 100644 --- a/Documentation/locking/lockdep-design.rst +++ b/Documentation/locking/lockdep-design.rst @@ -392,3 +392,261 @@ Run the command and save the output, then compare against the output from a later run of this command to identify the leakers. This same output can also help you find situations where runtime lock initialization has been omitted. + +Recursive read locks: +--------------------- +The whole of the rest document tries to prove a certain type of cycle is equivalent +to deadlock possibility. + +There are three types of lockers: writers (i.e. exclusive lockers, like +spin_lock() or write_lock()), non-recursive readers (i.e. shared lockers, like +down_read()) and recursive readers (recursive shared lockers, like rcu_read_lock()). +And we use the following notations of those lockers in the rest of the document: + + W or E: stands for writers (exclusive lockers). + r: stands for non-recursive readers. + R: stands for recursive readers. + S: stands for all readers (non-recursive + recursive), as both are shared lockers. + N: stands for writers and non-recursive readers, as both are not recursive. + +Obviously, N is "r or W" and S is "r or R". + +Recursive readers, as their name indicates, are the lockers allowed to acquire +even inside the critical section of another reader of the same lock instance, +in other words, allowing nested read-side critical sections of one lock instance. + +While non-recursive readers will cause a self deadlock if trying to acquire inside +the critical section of another reader of the same lock instance. + +The difference between recursive readers and non-recursive readers is because: +recursive readers get blocked only by a write lock *holder*, while non-recursive +readers could get blocked by a write lock *waiter*. Considering the follow example: + + TASK A: TASK B: + + read_lock(X); + write_lock(X); + read_lock_2(X); + +Task A gets the reader (no matter whether recursive or non-recursive) on X via +read_lock() first. And when task B tries to acquire writer on X, it will block +and become a waiter for writer on X. Now if read_lock_2() is recursive readers, +task A will make progress, because writer waiters don't block recursive readers, +and there is no deadlock. However, if read_lock_2() is non-recursive readers, +it will get blocked by writer waiter B, and cause a self deadlock. + +Block conditions on readers/writers of the same lock instance: +-------------------------------------------------------------- +There are simply four block conditions: + +1. Writers block other writers. +2. Readers block writers. +3. Writers block both recursive readers and non-recursive readers. +4. And readers (recursive or not) don't block other recursive readers but + may block non-recursive readers (because of the potential co-existing + writer waiters) + +Block condition matrix, Y means the row blocks the column, and N means otherwise. + + | E | r | R | + +---+---+---+---+ + E | Y | Y | Y | + +---+---+---+---+ + r | Y | Y | N | + +---+---+---+---+ + R | Y | Y | N | + + (W: writers, r: non-recursive readers, R: recursive readers) + + +acquired recursively. Unlike non-recursive read locks, recursive read locks +only get blocked by current write lock *holders* other than write lock +*waiters*, for example: + + TASK A: TASK B: + + read_lock(X); + + write_lock(X); + + read_lock(X); + +is not a deadlock for recursive read locks, as while the task B is waiting for +the lock X, the second read_lock() doesn't need to wait because it's a recursive +read lock. However if the read_lock() is non-recursive read lock, then the above +case is a deadlock, because even if the write_lock() in TASK B cannot get the +lock, but it can block the second read_lock() in TASK A. + +Note that a lock can be a write lock (exclusive lock), a non-recursive read +lock (non-recursive shared lock) or a recursive read lock (recursive shared +lock), depending on the lock operations used to acquire it (more specifically, +the value of the 'read' parameter for lock_acquire()). In other words, a single +lock instance has three types of acquisition depending on the acquisition +functions: exclusive, non-recursive read, and recursive read. + +To be concise, we call that write locks and non-recursive read locks as +"non-recursive" locks and recursive read locks as "recursive" locks. + +Recursive locks don't block each other, while non-recursive locks do (this is +even true for two non-recursive read locks). A non-recursive lock can block the +corresponding recursive lock, and vice versa. + +A deadlock case with recursive locks involved is as follow: + + TASK A: TASK B: + + read_lock(X); + read_lock(Y); + write_lock(Y); + write_lock(X); + +Task A is waiting for task B to read_unlock() Y and task B is waiting for task +A to read_unlock() X. + +Dependency types and strong dependency paths: +--------------------------------------------- +Lock dependencies record the orders of the acquisitions of a pair of locks, and +because there are 3 types for lockers, there are, in theory, 9 types of lock +dependencies, but we can show that 4 types of lock dependencies are enough for +deadlock detection. + +For each lock dependency: + + L1 -> L2 + +, which means lockdep has seen L1 held before L2 held in the same context at runtime. +And in deadlock detection, we care whether we could get blocked on L2 with L1 held, +IOW, whether there is a locker L3 that L1 blocks L3 and L2 gets blocked by L3. So +we only care about 1) what L1 blocks and 2) what blocks L2. As a result, we can combine +recursive readers and non-recursive readers for L1 (as they block the same types) and +we can combine writers and non-recursive readers for L2 (as they get blocked by the +same types). + +With the above combination for simplification, there are 4 types of dependency edges +in the lockdep graph: + +1) -(ER)->: exclusive writer to recursive reader dependency, "X -(ER)-> Y" means + X -> Y and X is a writer and Y is a recursive reader. + +2) -(EN)->: exclusive writer to non-recursive locker dependency, "X -(EN)-> Y" means + X -> Y and X is a writer and Y is either a writer or non-recursive reader. + +3) -(SR)->: shared reader to recursive reader dependency, "X -(SR)-> Y" means + X -> Y and X is a reader (recursive or not) and Y is a recursive reader. + +4) -(SN)->: shared reader to non-recursive locker dependency, "X -(SN)-> Y" means + X -> Y and X is a reader (recursive or not) and Y is either a writer or + non-recursive reader. + +Note that given two locks, they may have multiple dependencies between them, for example: + + TASK A: + + read_lock(X); + write_lock(Y); + ... + + TASK B: + + write_lock(X); + write_lock(Y); + +, we have both X -(SN)-> Y and X -(EN)-> Y in the dependency graph. + +We use -(xN)-> to represent edges that are either -(EN)-> or -(SN)->, the +similar for -(Ex)->, -(xR)-> and -(Sx)-> + +A "path" is a series of conjunct dependency edges in the graph. And we define a +"strong" path, which indicates the strong dependency throughout each dependency +in the path, as the path that doesn't have two conjunct edges (dependencies) as +-(xR)-> and -(Sx)->. In other words, a "strong" path is a path from a lock +walking to another through the lock dependencies, and if X -> Y -> Z is in the +path (where X, Y, Z are locks), and the walk from X to Y is through a -(SR)-> or +-(ER)-> dependency, the walk from Y to Z must not be through a -(SN)-> or +-(SR)-> dependency. + +We will see why the path is called "strong" in next section. + +Recursive Read Deadlock Detection: +---------------------------------- + +We now prove two things: + +Lemma 1: + +If there is a closed strong path (i.e. a strong circle), then there is a +combination of locking sequences that causes deadlock. I.e. a strong circle is +sufficient for deadlock detection. + +Lemma 2: + +If there is no closed strong path (i.e. strong circle), then there is no +combination of locking sequences that could cause deadlock. I.e. strong +circles are necessary for deadlock detection. + +With these two Lemmas, we can easily say a closed strong path is both sufficient +and necessary for deadlocks, therefore a closed strong path is equivalent to +deadlock possibility. As a closed strong path stands for a dependency chain that +could cause deadlocks, so we call it "strong", considering there are dependency +circles that won't cause deadlocks. + +Proof for sufficiency (Lemma 1): + +Let's say we have a strong circle: + + L1 -> L2 ... -> Ln -> L1 + +, which means we have dependencies: + + L1 -> L2 + L2 -> L3 + ... + Ln-1 -> Ln + Ln -> L1 + +We now can construct a combination of locking sequences that cause deadlock: + +Firstly let's make one CPU/task get the L1 in L1 -> L2, and then another get +the L2 in L2 -> L3, and so on. After this, all of the Lx in Lx -> Lx+1 are +held by different CPU/tasks. + +And then because we have L1 -> L2, so the holder of L1 is going to acquire L2 +in L1 -> L2, however since L2 is already held by another CPU/task, plus L1 -> +L2 and L2 -> L3 are not -(xR)-> and -(Sx)-> (the definition of strong), which +means either L2 in L1 -> L2 is a non-recursive locker (blocked by anyone) or +the L2 in L2 -> L3, is writer (blocking anyone), therefore the holder of L1 +cannot get L2, it has to wait L2's holder to release. + +Moreover, we can have a similar conclusion for L2's holder: it has to wait L3's +holder to release, and so on. We now can prove that Lx's holder has to wait for +Lx+1's holder to release, and note that Ln+1 is L1, so we have a circular +waiting scenario and nobody can get progress, therefore a deadlock. + +Proof for necessary (Lemma 2): + +Lemma 2 is equivalent to: If there is a deadlock scenario, then there must be a +strong circle in the dependency graph. + +According to Wikipedia[1], if there is a deadlock, then there must be a circular +waiting scenario, means there are N CPU/tasks, where CPU/task P1 is waiting for +a lock held by P2, and P2 is waiting for a lock held by P3, ... and Pn is waiting +for a lock held by P1. Let's name the lock Px is waiting as Lx, so since P1 is waiting +for L1 and holding Ln, so we will have Ln -> L1 in the dependency graph. Similarly, +we have L1 -> L2, L2 -> L3, ..., Ln-1 -> Ln in the dependency graph, which means we +have a circle: + + Ln -> L1 -> L2 -> ... -> Ln + +, and now let's prove the circle is strong: + +For a lock Lx, Px contributes the dependency Lx-1 -> Lx and Px+1 contributes +the dependency Lx -> Lx+1, and since Px is waiting for Px+1 to release Lx, +so it's impossible that Lx on Px+1 is a reader and Lx on Px is a recursive +reader, because readers (no matter recursive or not) don't block recursive +readers, therefore Lx-1 -> Lx and Lx -> Lx+1 cannot be a -(xR)-> -(Sx)-> pair, +and this is true for any lock in the circle, therefore, the circle is strong. + +References: +----------- +[1]: https://en.wikipedia.org/wiki/Deadlock +[2]: Shibu, K. (2009). Intro To Embedded Systems (1st ed.). Tata McGraw-Hill diff --git a/Documentation/locking/locktypes.rst b/Documentation/locking/locktypes.rst index 4cefed8048ca..ddada4a53749 100644 --- a/Documentation/locking/locktypes.rst +++ b/Documentation/locking/locktypes.rst @@ -164,14 +164,14 @@ by disabling preemption or interrupts. On non-PREEMPT_RT kernels local_lock operations map to the preemption and interrupt disabling and enabling primitives: - =========================== ====================== - local_lock(&llock) preempt_disable() - local_unlock(&llock) preempt_enable() - local_lock_irq(&llock) local_irq_disable() - local_unlock_irq(&llock) local_irq_enable() - local_lock_save(&llock) local_irq_save() - local_lock_restore(&llock) local_irq_save() - =========================== ====================== + =============================== ====================== + local_lock(&llock) preempt_disable() + local_unlock(&llock) preempt_enable() + local_lock_irq(&llock) local_irq_disable() + local_unlock_irq(&llock) local_irq_enable() + local_lock_irqsave(&llock) local_irq_save() + local_unlock_irqrestore(&llock) local_irq_restore() + =============================== ====================== The named scope of local_lock has two advantages over the regular primitives: @@ -353,14 +353,14 @@ protection scope. So the following substitution is wrong:: { local_irq_save(flags); -> local_lock_irqsave(&local_lock_1, flags); func3(); - local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_1, flags); + local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_1, flags); } func2() { local_irq_save(flags); -> local_lock_irqsave(&local_lock_2, flags); func3(); - local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_2, flags); + local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_2, flags); } func3() @@ -379,14 +379,14 @@ PREEMPT_RT-specific semantics of spinlock_t. The correct substitution is:: { local_irq_save(flags); -> local_lock_irqsave(&local_lock, flags); func3(); - local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags); + local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags); } func2() { local_irq_save(flags); -> local_lock_irqsave(&local_lock, flags); func3(); - local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags); + local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags); } func3() diff --git a/Documentation/locking/seqlock.rst b/Documentation/locking/seqlock.rst index 62c5ad98c11c..a334b584f2b3 100644 --- a/Documentation/locking/seqlock.rst +++ b/Documentation/locking/seqlock.rst @@ -139,6 +139,24 @@ with the associated LOCKTYPE lock acquired. Read path: same as in :ref:`seqcount_t`. + +.. _seqcount_latch_t: + +Latch sequence counters (``seqcount_latch_t``) +---------------------------------------------- + +Latch sequence counters are a multiversion concurrency control mechanism +where the embedded seqcount_t counter even/odd value is used to switch +between two copies of protected data. This allows the sequence counter +read path to safely interrupt its own write side critical section. + +Use seqcount_latch_t when the write side sections cannot be protected +from interruption by readers. This is typically the case when the read +side can be invoked from NMI handlers. + +Check `raw_write_seqcount_latch()` for more information. + + .. _seqlock_t: Sequential locks (``seqlock_t``) diff --git a/Documentation/maintainer/index.rst b/Documentation/maintainer/index.rst index d904e74e1159..f0a60435b124 100644 --- a/Documentation/maintainer/index.rst +++ b/Documentation/maintainer/index.rst @@ -13,4 +13,5 @@ additions to this manual. rebasing-and-merging pull-requests maintainer-entry-profile + modifying-patches diff --git a/Documentation/maintainer/maintainer-entry-profile.rst b/Documentation/maintainer/maintainer-entry-profile.rst index 227f427118e8..b7a627d6c97d 100644 --- a/Documentation/maintainer/maintainer-entry-profile.rst +++ b/Documentation/maintainer/maintainer-entry-profile.rst @@ -101,3 +101,4 @@ to do something different in the near future. ../doc-guide/maintainer-profile ../nvdimm/maintainer-entry-profile + ../riscv/patch-acceptance diff --git a/Documentation/maintainer/modifying-patches.rst b/Documentation/maintainer/modifying-patches.rst new file mode 100644 index 000000000000..58385d2e8065 --- /dev/null +++ b/Documentation/maintainer/modifying-patches.rst @@ -0,0 +1,50 @@ +.. _modifyingpatches: + +Modifying Patches +================= + +If you are a subsystem or branch maintainer, sometimes you need to slightly +modify patches you receive in order to merge them, because the code is not +exactly the same in your tree and the submitters'. If you stick strictly to +rule (c) of the developers certificate of origin, you should ask the submitter +to rediff, but this is a totally counter-productive waste of time and energy. +Rule (b) allows you to adjust the code, but then it is very impolite to change +one submitters code and make him endorse your bugs. To solve this problem, it +is recommended that you add a line between the last Signed-off-by header and +yours, indicating the nature of your changes. While there is nothing mandatory +about this, it seems like prepending the description with your mail and/or +name, all enclosed in square brackets, is noticeable enough to make it obvious +that you are responsible for last-minute changes. Example:: + + Signed-off-by: Random J Developer <random@developer.example.org> + [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h] + Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org> + +This practice is particularly helpful if you maintain a stable branch and +want at the same time to credit the author, track changes, merge the fix, +and protect the submitter from complaints. Note that under no circumstances +can you change the author's identity (the From header), as it is the one +which appears in the changelog. + +Special note to back-porters: It seems to be a common and useful practice +to insert an indication of the origin of a patch at the top of the commit +message (just after the subject line) to facilitate tracking. For instance, +here's what we see in a 3.x-stable release:: + + Date: Tue Oct 7 07:26:38 2014 -0400 + + libata: Un-break ATA blacklist + + commit 1c40279960bcd7d52dbdf1d466b20d24b99176c8 upstream. + +And here's what might appear in an older kernel once a patch is backported:: + + Date: Tue May 13 22:12:27 2008 +0200 + + wireless, airo: waitbusy() won't delay + + [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a] + +Whatever the format, this information provides a valuable help to people +tracking your trees, and to people trying to troubleshoot bugs in your +tree. diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index 96186332e5f4..17c8e0c2deb4 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -546,8 +546,8 @@ There are certain things that the Linux kernel memory barriers do not guarantee: [*] For information on bus mastering DMA and coherency please read: Documentation/driver-api/pci/pci.rst - Documentation/DMA-API-HOWTO.txt - Documentation/DMA-API.txt + Documentation/core-api/dma-api-howto.rst + Documentation/core-api/dma-api.rst DATA DEPENDENCY BARRIERS (HISTORICAL) @@ -1932,8 +1932,8 @@ There are some more advanced barrier functions: here. See the subsection "Kernel I/O barrier effects" for more information on - relaxed I/O accessors and the Documentation/DMA-API.txt file for more - information on consistent memory. + relaxed I/O accessors and the Documentation/core-api/dma-api.rst file for + more information on consistent memory. (*) pmem_wmb(); diff --git a/Documentation/mips/booting.rst b/Documentation/mips/booting.rst new file mode 100644 index 000000000000..7c18a4eab48b --- /dev/null +++ b/Documentation/mips/booting.rst @@ -0,0 +1,28 @@ +.. SPDX-License-Identifier: GPL-2.0 + +BMIPS DeviceTree Booting +------------------------ + + Some bootloaders only support a single entry point, at the start of the + kernel image. Other bootloaders will jump to the ELF start address. + Both schemes are supported; CONFIG_BOOT_RAW=y and CONFIG_NO_EXCEPT_FILL=y, + so the first instruction immediately jumps to kernel_entry(). + + Similar to the arch/arm case (b), a DT-aware bootloader is expected to + set up the following registers: + + a0 : 0 + + a1 : 0xffffffff + + a2 : Physical pointer to the device tree block (defined in chapter + II) in RAM. The device tree can be located anywhere in the first + 512MB of the physical address space (0x00000000 - 0x1fffffff), + aligned on a 64 bit boundary. + + Legacy bootloaders do not use this convention, and they do not pass in a + DT block. In this case, Linux will look for a builtin DTB, selected via + CONFIG_DT_*. + + This convention is defined for 32-bit systems only, as there are not + currently any 64-bit BMIPS implementations. diff --git a/Documentation/mips/index.rst b/Documentation/mips/index.rst index d5ad8c00f0bd..35cceea4e8bc 100644 --- a/Documentation/mips/index.rst +++ b/Documentation/mips/index.rst @@ -8,6 +8,7 @@ MIPS-specific Documentation :maxdepth: 2 :numbered: + booting ingenic-tcu .. only:: subproject and html diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst index 5bc55a4e3bce..2ccc5644cc98 100644 --- a/Documentation/networking/af_xdp.rst +++ b/Documentation/networking/af_xdp.rst @@ -258,14 +258,21 @@ socket into zero-copy mode or fail. XDP_SHARED_UMEM bind flag ------------------------- -This flag enables you to bind multiple sockets to the same UMEM, but -only if they share the same queue id. In this mode, each socket has -their own RX and TX rings, but the UMEM (tied to the fist socket -created) only has a single FILL ring and a single COMPLETION -ring. To use this mode, create the first socket and bind it in the normal -way. Create a second socket and create an RX and a TX ring, or at -least one of them, but no FILL or COMPLETION rings as the ones from -the first socket will be used. In the bind call, set he +This flag enables you to bind multiple sockets to the same UMEM. It +works on the same queue id, between queue ids and between +netdevs/devices. In this mode, each socket has their own RX and TX +rings as usual, but you are going to have one or more FILL and +COMPLETION ring pairs. You have to create one of these pairs per +unique netdev and queue id tuple that you bind to. + +Starting with the case were we would like to share a UMEM between +sockets bound to the same netdev and queue id. The UMEM (tied to the +fist socket created) will only have a single FILL ring and a single +COMPLETION ring as there is only on unique netdev,queue_id tuple that +we have bound to. To use this mode, create the first socket and bind +it in the normal way. Create a second socket and create an RX and a TX +ring, or at least one of them, but no FILL or COMPLETION rings as the +ones from the first socket will be used. In the bind call, set he XDP_SHARED_UMEM option and provide the initial socket's fd in the sxdp_shared_umem_fd field. You can attach an arbitrary number of extra sockets this way. @@ -305,11 +312,41 @@ concurrently. There are no synchronization primitives in the libbpf code that protects multiple users at this point in time. Libbpf uses this mode if you create more than one socket tied to the -same umem. However, note that you need to supply the +same UMEM. However, note that you need to supply the XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD libbpf_flag with the xsk_socket__create calls and load your own XDP program as there is no built in one in libbpf that will route the traffic for you. +The second case is when you share a UMEM between sockets that are +bound to different queue ids and/or netdevs. In this case you have to +create one FILL ring and one COMPLETION ring for each unique +netdev,queue_id pair. Let us say you want to create two sockets bound +to two different queue ids on the same netdev. Create the first socket +and bind it in the normal way. Create a second socket and create an RX +and a TX ring, or at least one of them, and then one FILL and +COMPLETION ring for this socket. Then in the bind call, set he +XDP_SHARED_UMEM option and provide the initial socket's fd in the +sxdp_shared_umem_fd field as you registered the UMEM on that +socket. These two sockets will now share one and the same UMEM. + +There is no need to supply an XDP program like the one in the previous +case where sockets were bound to the same queue id and +device. Instead, use the NIC's packet steering capabilities to steer +the packets to the right queue. In the previous example, there is only +one queue shared among sockets, so the NIC cannot do this steering. It +can only steer between queues. + +In libbpf, you need to use the xsk_socket__create_shared() API as it +takes a reference to a FILL ring and a COMPLETION ring that will be +created for you and bound to the shared UMEM. You can use this +function for all the sockets you create, or you can use it for the +second and following ones and use xsk_socket__create() for the first +one. Both methods yield the same result. + +Note that a UMEM can be shared between sockets on the same queue id +and device, as well as between queues on the same device and between +devices at the same time. + XDP_USE_NEED_WAKEUP bind flag ----------------------------- @@ -364,7 +401,7 @@ resources by only setting up one of them. Both the FILL ring and the COMPLETION ring are mandatory as you need to have a UMEM tied to your socket. But if the XDP_SHARED_UMEM flag is used, any socket after the first one does not have a UMEM and should in that case not have any -FILL or COMPLETION rings created as the ones from the shared umem will +FILL or COMPLETION rings created as the ones from the shared UMEM will be used. Note, that the rings are single-producer single-consumer, so do not try to access them from multiple processes at the same time. See the XDP_SHARED_UMEM section. @@ -567,6 +604,17 @@ A: The short answer is no, that is not supported at the moment. The switch, or other distribution mechanism, in your NIC to direct traffic to the correct queue id and socket. +Q: My packets are sometimes corrupted. What is wrong? + +A: Care has to be taken not to feed the same buffer in the UMEM into + more than one ring at the same time. If you for example feed the + same buffer into the FILL ring and the TX ring at the same time, the + NIC might receive data into the buffer at the same time it is + sending it. This will cause some packets to become corrupted. Same + thing goes for feeding the same buffer into the FILL rings + belonging to different queue ids or netdevs bound with the + XDP_SHARED_UMEM flag. + Credits ======= diff --git a/Documentation/networking/caif/index.rst b/Documentation/networking/caif/index.rst index 86e5b7832ec3..ec29b6f4bdb4 100644 --- a/Documentation/networking/caif/index.rst +++ b/Documentation/networking/caif/index.rst @@ -10,4 +10,3 @@ Contents: linux_caif caif - spi_porting diff --git a/Documentation/networking/caif/spi_porting.rst b/Documentation/networking/caif/spi_porting.rst deleted file mode 100644 index d49f874b20ac..000000000000 --- a/Documentation/networking/caif/spi_porting.rst +++ /dev/null @@ -1,229 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -================ -CAIF SPI porting -================ - -CAIF SPI basics -=============== - -Running CAIF over SPI needs some extra setup, owing to the nature of SPI. -Two extra GPIOs have been added in order to negotiate the transfers -between the master and the slave. The minimum requirement for running -CAIF over SPI is a SPI slave chip and two GPIOs (more details below). -Please note that running as a slave implies that you need to keep up -with the master clock. An overrun or underrun event is fatal. - -CAIF SPI framework -================== - -To make porting as easy as possible, the CAIF SPI has been divided in -two parts. The first part (called the interface part) deals with all -generic functionality such as length framing, SPI frame negotiation -and SPI frame delivery and transmission. The other part is the CAIF -SPI slave device part, which is the module that you have to write if -you want to run SPI CAIF on a new hardware. This part takes care of -the physical hardware, both with regard to SPI and to GPIOs. - -- Implementing a CAIF SPI device: - - - Functionality provided by the CAIF SPI slave device: - - In order to implement a SPI device you will, as a minimum, - need to implement the following - functions: - - :: - - int (*init_xfer) (struct cfspi_xfer * xfer, struct cfspi_dev *dev): - - This function is called by the CAIF SPI interface to give - you a chance to set up your hardware to be ready to receive - a stream of data from the master. The xfer structure contains - both physical and logical addresses, as well as the total length - of the transfer in both directions.The dev parameter can be used - to map to different CAIF SPI slave devices. - - :: - - void (*sig_xfer) (bool xfer, struct cfspi_dev *dev): - - This function is called by the CAIF SPI interface when the output - (SPI_INT) GPIO needs to change state. The boolean value of the xfer - variable indicates whether the GPIO should be asserted (HIGH) or - deasserted (LOW). The dev parameter can be used to map to different CAIF - SPI slave devices. - - - Functionality provided by the CAIF SPI interface: - - :: - - void (*ss_cb) (bool assert, struct cfspi_ifc *ifc); - - This function is called by the CAIF SPI slave device in order to - signal a change of state of the input GPIO (SS) to the interface. - Only active edges are mandatory to be reported. - This function can be called from IRQ context (recommended in order - not to introduce latency). The ifc parameter should be the pointer - returned from the platform probe function in the SPI device structure. - - :: - - void (*xfer_done_cb) (struct cfspi_ifc *ifc); - - This function is called by the CAIF SPI slave device in order to - report that a transfer is completed. This function should only be - called once both the transmission and the reception are completed. - This function can be called from IRQ context (recommended in order - not to introduce latency). The ifc parameter should be the pointer - returned from the platform probe function in the SPI device structure. - - - Connecting the bits and pieces: - - - Filling in the SPI slave device structure: - - Connect the necessary callback functions. - - Indicate clock speed (used to calculate toggle delays). - - Chose a suitable name (helps debugging if you use several CAIF - SPI slave devices). - - Assign your private data (can be used to map to your - structure). - - - Filling in the SPI slave platform device structure: - - Add name of driver to connect to ("cfspi_sspi"). - - Assign the SPI slave device structure as platform data. - -Padding -======= - -In order to optimize throughput, a number of SPI padding options are provided. -Padding can be enabled independently for uplink and downlink transfers. -Padding can be enabled for the head, the tail and for the total frame size. -The padding needs to be correctly configured on both sides of the link. -The padding can be changed via module parameters in cfspi_sspi.c or via -the sysfs directory of the cfspi_sspi driver (before device registration). - -- CAIF SPI device template:: - - /* - * Copyright (C) ST-Ericsson AB 2010 - * Author: Daniel Martensson / Daniel.Martensson@stericsson.com - * License terms: GNU General Public License (GPL), version 2. - * - */ - - #include <linux/init.h> - #include <linux/module.h> - #include <linux/device.h> - #include <linux/wait.h> - #include <linux/interrupt.h> - #include <linux/dma-mapping.h> - #include <net/caif/caif_spi.h> - - MODULE_LICENSE("GPL"); - - struct sspi_struct { - struct cfspi_dev sdev; - struct cfspi_xfer *xfer; - }; - - static struct sspi_struct slave; - static struct platform_device slave_device; - - static irqreturn_t sspi_irq(int irq, void *arg) - { - /* You only need to trigger on an edge to the active state of the - * SS signal. Once a edge is detected, the ss_cb() function should be - * called with the parameter assert set to true. It is OK - * (and even advised) to call the ss_cb() function in IRQ context in - * order not to add any delay. */ - - return IRQ_HANDLED; - } - - static void sspi_complete(void *context) - { - /* Normally the DMA or the SPI framework will call you back - * in something similar to this. The only thing you need to - * do is to call the xfer_done_cb() function, providing the pointer - * to the CAIF SPI interface. It is OK to call this function - * from IRQ context. */ - } - - static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev) - { - /* Store transfer info. For a normal implementation you should - * set up your DMA here and make sure that you are ready to - * receive the data from the master SPI. */ - - struct sspi_struct *sspi = (struct sspi_struct *)dev->priv; - - sspi->xfer = xfer; - - return 0; - } - - void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev) - { - /* If xfer is true then you should assert the SPI_INT to indicate to - * the master that you are ready to receive the data from the master - * SPI. If xfer is false then you should de-assert SPI_INT to indicate - * that the transfer is done. - */ - - struct sspi_struct *sspi = (struct sspi_struct *)dev->priv; - } - - static void sspi_release(struct device *dev) - { - /* - * Here you should release your SPI device resources. - */ - } - - static int __init sspi_init(void) - { - /* Here you should initialize your SPI device by providing the - * necessary functions, clock speed, name and private data. Once - * done, you can register your device with the - * platform_device_register() function. This function will return - * with the CAIF SPI interface initialized. This is probably also - * the place where you should set up your GPIOs, interrupts and SPI - * resources. */ - - int res = 0; - - /* Initialize slave device. */ - slave.sdev.init_xfer = sspi_init_xfer; - slave.sdev.sig_xfer = sspi_sig_xfer; - slave.sdev.clk_mhz = 13; - slave.sdev.priv = &slave; - slave.sdev.name = "spi_sspi"; - slave_device.dev.release = sspi_release; - - /* Initialize platform device. */ - slave_device.name = "cfspi_sspi"; - slave_device.dev.platform_data = &slave.sdev; - - /* Register platform device. */ - res = platform_device_register(&slave_device); - if (res) { - printk(KERN_WARNING "sspi_init: failed to register dev.\n"); - return -ENODEV; - } - - return res; - } - - static void __exit sspi_exit(void) - { - platform_device_del(&slave_device); - } - - module_init(sspi_init); - module_exit(sspi_exit); diff --git a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst index 11af6388ea87..3561a8a29fd2 100644 --- a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst +++ b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst @@ -39,16 +39,6 @@ debug logs. Some of the ENA devices support a working mode called Low-latency Queue (LLQ), which saves several more microseconds. -Supported PCI vendor ID/device IDs -================================== - -========= ======================= -1d0f:0ec2 ENA PF -1d0f:1ec2 ENA PF with LLQ support -1d0f:ec20 ENA VF -1d0f:ec21 ENA VF with LLQ support -========= ======================= - ENA Source Code Directory Structure =================================== @@ -212,20 +202,11 @@ In adaptive interrupt moderation mode the interrupt delay value is updated by the driver dynamically and adjusted every NAPI cycle according to the traffic nature. -By default ENA driver applies adaptive coalescing on Rx traffic and -conventional coalescing on Tx traffic. - Adaptive coalescing can be switched on/off through ethtool(8) adaptive_rx on|off parameter. -The driver chooses interrupt delay value according to the number of -bytes and packets received between interrupt unmasking and interrupt -posting. The driver uses interrupt delay table that subdivides the -range of received bytes/packets into 5 levels and assigns interrupt -delay value to each level. - -The user can enable/disable adaptive moderation, modify the interrupt -delay table and restore its default values through sysfs. +More information about Adaptive Interrupt Moderation (DIM) can be found in +Documentation/networking/net_dim.rst RX copybreak ============ @@ -274,7 +255,7 @@ RSS inputs for hash functions. - The driver configures RSS settings using the AQ SetFeature command (ENA_ADMIN_RSS_HASH_FUNCTION, ENA_ADMIN_RSS_HASH_INPUT and - ENA_ADMIN_RSS_REDIRECTION_TABLE_CONFIG properties). + ENA_ADMIN_RSS_INDIRECTION_TABLE_CONFIG properties). - If the NETIF_F_RXHASH flag is set, the 32-bit result of the hash function delivered in the Rx CQ descriptor is set in the received SKB. diff --git a/Documentation/networking/device_drivers/qlogic/LICENSE.qla3xxx b/Documentation/networking/device_drivers/qlogic/LICENSE.qla3xxx deleted file mode 100644 index 2f2077e34d81..000000000000 --- a/Documentation/networking/device_drivers/qlogic/LICENSE.qla3xxx +++ /dev/null @@ -1,46 +0,0 @@ -Copyright (c) 2003-2006 QLogic Corporation -QLogic Linux Networking HBA Driver - -This program includes a device driver for Linux 2.6 that may be -distributed with QLogic hardware specific firmware binary file. -You may modify and redistribute the device driver code under the -GNU General Public License as published by the Free Software -Foundation (version 2 or a later version). - -You may redistribute the hardware specific firmware binary file -under the following terms: - - 1. Redistribution of source code (only if applicable), - must retain the above copyright notice, this list of - conditions and the following disclaimer. - - 2. Redistribution in binary form must reproduce the above - copyright notice, this list of conditions and the - following disclaimer in the documentation and/or other - materials provided with the distribution. - - 3. The name of QLogic Corporation may not be used to - endorse or promote products derived from this software - without specific prior written permission - -REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE, -THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY -EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR -BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED -TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT -CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR -OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT, -TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN -ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN -COMBINATION WITH THIS PROGRAM. - diff --git a/Documentation/networking/device_drivers/qlogic/LICENSE.qlcnic b/Documentation/networking/device_drivers/qlogic/LICENSE.qlcnic deleted file mode 100644 index 2ae3b64983ab..000000000000 --- a/Documentation/networking/device_drivers/qlogic/LICENSE.qlcnic +++ /dev/null @@ -1,288 +0,0 @@ -Copyright (c) 2009-2013 QLogic Corporation -QLogic Linux qlcnic NIC Driver - -You may modify and redistribute the device driver code under the -GNU General Public License (a copy of which is attached hereto as -Exhibit A) published by the Free Software Foundation (version 2). - - -EXHIBIT A - - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Lesser General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. diff --git a/Documentation/networking/device_drivers/qlogic/LICENSE.qlge b/Documentation/networking/device_drivers/qlogic/LICENSE.qlge deleted file mode 100644 index ce64e4d15b21..000000000000 --- a/Documentation/networking/device_drivers/qlogic/LICENSE.qlge +++ /dev/null @@ -1,288 +0,0 @@ -Copyright (c) 2003-2011 QLogic Corporation -QLogic Linux qlge NIC Driver - -You may modify and redistribute the device driver code under the -GNU General Public License (a copy of which is attached hereto as -Exhibit A) published by the Free Software Foundation (version 2). - - -EXHIBIT A - - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Lesser General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. diff --git a/Documentation/networking/devlink/devlink-flash.rst b/Documentation/networking/devlink/devlink-flash.rst index 40a87c0222cb..603e732f00cc 100644 --- a/Documentation/networking/devlink/devlink-flash.rst +++ b/Documentation/networking/devlink/devlink-flash.rst @@ -16,6 +16,34 @@ Note that the file name is a path relative to the firmware loading path (usually ``/lib/firmware/``). Drivers may send status updates to inform user space about the progress of the update operation. +Overwrite Mask +============== + +The ``devlink-flash`` command allows optionally specifying a mask indicating +how the device should handle subsections of flash components when updating. +This mask indicates the set of sections which are allowed to be overwritten. + +.. list-table:: List of overwrite mask bits + :widths: 5 95 + + * - Name + - Description + * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` + - Indicates that the device should overwrite settings in the components + being updated with the settings found in the provided image. + * - ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS`` + - Indicates that the device should overwrite identifiers in the + components being updated with the identifiers found in the provided + image. This includes MAC addresses, serial IDs, and similar device + identifiers. + +Multiple overwrite bits may be combined and requested together. If no bits +are provided, it is expected that the device only update firmware binaries +in the components being updated. Settings and identifiers are expected to be +preserved across the update. A device may not support every combination and +the driver for such a device must reject any combination which cannot be +faithfully implemented. + Firmware Loading ================ diff --git a/Documentation/networking/devlink/devlink-params.rst b/Documentation/networking/devlink/devlink-params.rst index d075fd090b3d..54c9f107c4b0 100644 --- a/Documentation/networking/devlink/devlink-params.rst +++ b/Documentation/networking/devlink/devlink-params.rst @@ -108,3 +108,9 @@ own name. * - ``region_snapshot_enable`` - Boolean - Enable capture of ``devlink-region`` snapshots. + * - ``enable_remote_dev_reset`` + - Boolean + - Enable device reset by remote host. When cleared, the device driver + will NACK any attempt of other host to reset the device. This parameter + is useful for setups where a device is shared by different hosts, such + as multi-host setup. diff --git a/Documentation/networking/devlink/devlink-reload.rst b/Documentation/networking/devlink/devlink-reload.rst new file mode 100644 index 000000000000..505d22da027d --- /dev/null +++ b/Documentation/networking/devlink/devlink-reload.rst @@ -0,0 +1,81 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +Devlink Reload +============== + +``devlink-reload`` provides mechanism to reinit driver entities, applying +``devlink-params`` and ``devlink-resources`` new values. It also provides +mechanism to activate firmware. + +Reload Actions +============== + +User may select a reload action. +By default ``driver_reinit`` action is selected. + +.. list-table:: Possible reload actions + :widths: 5 90 + + * - Name + - Description + * - ``driver-reinit`` + - Devlink driver entities re-initialization, including applying + new values to devlink entities which are used during driver + load such as ``devlink-params`` in configuration mode + ``driverinit`` or ``devlink-resources`` + * - ``fw_activate`` + - Firmware activate. Activates new firmware if such image is stored and + pending activation. If no limitation specified this action may involve + firmware reset. If no new image pending this action will reload current + firmware image. + +Note that even though user asks for a specific action, the driver +implementation might require to perform another action alongside with +it. For example, some driver do not support driver reinitialization +being performed without fw activation. Therefore, the devlink reload +command returns the list of actions which were actrually performed. + +Reload Limits +============= + +By default reload actions are not limited and driver implementation may +include reset or downtime as needed to perform the actions. + +However, some drivers support action limits, which limit the action +implementation to specific constraints. + +.. list-table:: Possible reload limits + :widths: 5 90 + + * - Name + - Description + * - ``no_reset`` + - No reset allowed, no down time allowed, no link flap and no + configuration is lost. + +Change Namespace +================ + +The netns option allows user to be able to move devlink instances into +namespaces during devlink reload operation. +By default all devlink instances are created in init_net and stay there. + +example usage +------------- + +.. code:: shell + + $ devlink dev reload help + $ devlink dev reload DEV [ netns { PID | NAME | ID } ] [ action { driver_reinit | fw_activate } ] [ limit no_reset ] + + # Run reload command for devlink driver entities re-initialization: + $ devlink dev reload pci/0000:82:00.0 action driver_reinit + reload_actions_performed: + driver_reinit + + # Run reload command to activate firmware: + # Note that mlx5 driver reloads the driver while activating firmware + $ devlink dev reload pci/0000:82:00.0 action fw_activate + reload_actions_performed: + driver_reinit fw_activate diff --git a/Documentation/networking/devlink/devlink-trap.rst b/Documentation/networking/devlink/devlink-trap.rst index 7a798352b45d..ef719ceac299 100644 --- a/Documentation/networking/devlink/devlink-trap.rst +++ b/Documentation/networking/devlink/devlink-trap.rst @@ -409,6 +409,73 @@ be added to the following table: - ``drop`` - Traps packets dropped due to the RED (Random Early Detection) algorithm (i.e., early drops) + * - ``vxlan_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the VXLAN header parsing which + might be because of packet truncation or the I flag is not set. + * - ``llc_snap_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the LLC+SNAP header parsing + * - ``vlan_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the VLAN header parsing. Could + include unexpected packet truncation. + * - ``pppoe_ppp_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the PPPoE+PPP header parsing. + This could include finding a session ID of 0xFFFF (which is reserved and + not for use), a PPPoE length which is larger than the frame received or + any common error on this type of header + * - ``mpls_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the MPLS header parsing which + could include unexpected header truncation + * - ``arp_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the ARP header parsing + * - ``ip_1_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the first IP header parsing. + This packet trap could include packets which do not pass an IP checksum + check, a header length check (a minimum of 20 bytes), which might suffer + from packet truncation thus the total length field exceeds the received + packet length etc + * - ``ip_n_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the parsing of the last IP + header (the inner one in case of an IP over IP tunnel). The same common + error checking is performed here as for the ip_1_parsing trap + * - ``gre_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the GRE header parsing + * - ``udp_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the UDP header parsing. + This packet trap could include checksum errorrs, an improper UDP + length detected (smaller than 8 bytes) or detection of header + truncation. + * - ``tcp_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the TCP header parsing. + This could include TCP checksum errors, improper combination of SYN, FIN + and/or RESET etc. + * - ``ipsec_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the IPSEC header parsing + * - ``sctp_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the SCTP header parsing. + This would mean that port number 0 was used or that the header is + truncated. + * - ``dccp_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the DCCP header parsing + * - ``gtp_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the GTP header parsing + * - ``esp_parsing`` + - ``drop`` + - Traps packets dropped due to an error in the ESP header parsing Driver-specific Packet Traps ============================ @@ -509,6 +576,9 @@ narrow. The description of these groups must be added to the following table: * - ``acl_trap`` - Contains packet traps for packets that were trapped (logged) by the device during ACL processing + * - ``parser_error_drops`` + - Contains packet traps for packets that were marked by the device during + parsing as erroneous Packet Trap Policers ==================== diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst index 237848d56f9b..b165181d5d4d 100644 --- a/Documentation/networking/devlink/ice.rst +++ b/Documentation/networking/devlink/ice.rst @@ -69,6 +69,11 @@ The ``ice`` driver reports the following versions - The version of the DDP package that is active in the device. Note that both the name (as reported by ``fw.app.name``) and version are required to uniquely identify the package. + * - ``fw.app.bundle_id`` + - 0xc0000001 + - Unique identifier for the DDP package loaded in the device. Also + referred to as the DDP Track ID. Can be used to uniquely identify + the specific DDP package. * - ``fw.netlist`` - running - 1.1.2000-6.7.0 @@ -81,6 +86,37 @@ The ``ice`` driver reports the following versions - 0xee16ced7 - The first 4 bytes of the hash of the netlist module contents. +Flash Update +============ + +The ``ice`` driver implements support for flash update using the +``devlink-flash`` interface. It supports updating the device flash using a +combined flash image that contains the ``fw.mgmt``, ``fw.undi``, and +``fw.netlist`` components. + +.. list-table:: List of supported overwrite modes + :widths: 5 95 + + * - Bits + - Behavior + * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` + - Do not preserve settings stored in the flash components being + updated. This includes overwriting the port configuration that + determines the number of physical functions the device will + initialize with. + * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` and ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS`` + - Do not preserve either settings or identifiers. Overwrite everything + in the flash with the contents from the provided image, without + performing any preservation. This includes overwriting device + identifying fields such as the MAC address, VPD area, and device + serial number. It is expected that this combination be used with an + image customized for the specific device. + +The ice hardware does not support overwriting only identifiers while +preserving settings, and thus ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS`` on its +own will be rejected. If no overwrite mask is provided, the firmware will be +instructed to preserve all settings and identifying fields when updating. + Regions ======= diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst index 7684ae5c4a4a..d82874760ae2 100644 --- a/Documentation/networking/devlink/index.rst +++ b/Documentation/networking/devlink/index.rst @@ -20,6 +20,7 @@ general. devlink-params devlink-region devlink-resource + devlink-reload devlink-trap Driver-specific documentation diff --git a/Documentation/networking/dsa/configuration.rst b/Documentation/networking/dsa/configuration.rst index af029b3ca2ab..11bd5e6108c0 100644 --- a/Documentation/networking/dsa/configuration.rst +++ b/Documentation/networking/dsa/configuration.rst @@ -180,7 +180,7 @@ The configuration can only be set up via VLAN tagging and bridge setup. # bring up the slave interfaces ip link set lan1 up - ip link set lan1 up + ip link set lan2 up ip link set lan3 up # create bridge diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index d53bcb31645a..30b98245979f 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -68,6 +68,7 @@ the flags may not apply to requests. Recognized flags are: ================================= =================================== ``ETHTOOL_FLAG_COMPACT_BITSETS`` use compact format bitsets in reply ``ETHTOOL_FLAG_OMIT_REPLY`` omit optional reply (_SET and _ACT) + ``ETHTOOL_FLAG_STATS`` include optional device statistics ================================= =================================== New request flags should follow the general idea that if the flag is not set, @@ -206,6 +207,7 @@ Userspace to kernel: ``ETHTOOL_MSG_TSINFO_GET`` get timestamping info ``ETHTOOL_MSG_CABLE_TEST_ACT`` action start cable test ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` action start raw TDR cable test + ``ETHTOOL_MSG_TUNNEL_INFO_GET`` get tunnel offload info ===================================== ================================ Kernel to userspace: @@ -239,6 +241,7 @@ Kernel to userspace: ``ETHTOOL_MSG_TSINFO_GET_REPLY`` timestamping info ``ETHTOOL_MSG_CABLE_TEST_NTF`` Cable test results ``ETHTOOL_MSG_CABLE_TEST_TDR_NTF`` Cable test TDR results + ``ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY`` tunnel offload info ===================================== ================================= ``GET`` requests are sent by userspace applications to retrieve device @@ -989,8 +992,18 @@ Kernel response contents: ``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation ``ETHTOOL_A_PAUSE_RX`` bool receive pause frames ``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames + ``ETHTOOL_A_PAUSE_STATS`` nested pause statistics ===================================== ====== ========================== +``ETHTOOL_A_PAUSE_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set +in ``ETHTOOL_A_HEADER_FLAGS``. +It will be empty if driver did not report any statistics. Drivers fill in +the statistics in the following structure: + +.. kernel-doc:: include/linux/ethtool.h + :identifiers: ethtool_pause_stats + +Each member has a corresponding attribute defined. PAUSE_SET ============ @@ -1363,4 +1376,5 @@ are netlink only. ``ETHTOOL_SFECPARAM`` n/a n/a ''ETHTOOL_MSG_CABLE_TEST_ACT'' n/a ''ETHTOOL_MSG_CABLE_TEST_TDR_ACT'' + n/a ``ETHTOOL_MSG_TUNNEL_INFO_GET`` =================================== ===================================== diff --git a/Documentation/networking/ieee802154.rst b/Documentation/networking/ieee802154.rst index 6f4bf8447a21..f27856d77c8b 100644 --- a/Documentation/networking/ieee802154.rst +++ b/Documentation/networking/ieee802154.rst @@ -26,7 +26,9 @@ The stack is composed of three main parts: Socket API ========== -.. c:function:: int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0); +:: + + int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0); The address family, socket addresses etc. are defined in the include/net/af_ieee802154.h header or in the special header @@ -131,12 +133,12 @@ Register PHY in the system. Freeing registered PHY. -.. c:function:: void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb, u8 lqi): +.. c:function:: void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb, u8 lqi) Telling 802.15.4 module there is a new received frame in the skb with the RF Link Quality Indicator (LQI) from the hardware device. -.. c:function:: void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb, bool ifs_handling): +.. c:function:: void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb, bool ifs_handling) Telling 802.15.4 module the frame in the skb is or going to be transmitted through the hardware device @@ -155,25 +157,25 @@ operations structure at least:: ... }; -.. c:function:: int start(struct ieee802154_hw *hw): +.. c:function:: int start(struct ieee802154_hw *hw) Handler that 802.15.4 module calls for the hardware device initialization. -.. c:function:: void stop(struct ieee802154_hw *hw): +.. c:function:: void stop(struct ieee802154_hw *hw) Handler that 802.15.4 module calls for the hardware device cleanup. -.. c:function:: int xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb): +.. c:function:: int xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb) Handler that 802.15.4 module calls for each frame in the skb going to be transmitted through the hardware device. -.. c:function:: int ed(struct ieee802154_hw *hw, u8 *level): +.. c:function:: int ed(struct ieee802154_hw *hw, u8 *level) Handler that 802.15.4 module calls for Energy Detection from the hardware device. -.. c:function:: int set_channel(struct ieee802154_hw *hw, u8 page, u8 channel): +.. c:function:: int set_channel(struct ieee802154_hw *hw, u8 page, u8 channel) Set radio for listening on specific channel of the hardware device. diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index c29496fff81c..63ef386afd0a 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -93,8 +93,10 @@ Contents: sctp secid seg6-sysctl + statistics strparser switchdev + sysfs-tagging tc-actions-env-rules tcp-thin team diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 837d51f9e1fa..25e6673a085a 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -1142,13 +1142,15 @@ icmp_ratelimit - INTEGER icmp_msgs_per_sec - INTEGER Limit maximal number of ICMP packets sent per second from this host. Only messages whose type matches icmp_ratemask (see below) are - controlled by this limit. + controlled by this limit. For security reasons, the precise count + of messages per second is randomized. Default: 1000 icmp_msgs_burst - INTEGER icmp_msgs_per_sec controls number of ICMP packets sent per second, while icmp_msgs_burst controls the burst size of these packets. + For security reasons, the precise burst size is randomized. Default: 50 diff --git a/Documentation/networking/kapi.rst b/Documentation/networking/kapi.rst index f03ae64be8bc..d198fa5eaacd 100644 --- a/Documentation/networking/kapi.rst +++ b/Documentation/networking/kapi.rst @@ -134,6 +134,15 @@ PHY Support .. kernel-doc:: drivers/net/phy/phy.c :internal: +.. kernel-doc:: drivers/net/phy/phy-core.c + :export: + +.. kernel-doc:: drivers/net/phy/phy-c45.c + :export: + +.. kernel-doc:: include/linux/phy.h + :internal: + .. kernel-doc:: drivers/net/phy/phy_device.c :export: diff --git a/Documentation/networking/l2tp.rst b/Documentation/networking/l2tp.rst index a48238a2ec09..498b382d25a0 100644 --- a/Documentation/networking/l2tp.rst +++ b/Documentation/networking/l2tp.rst @@ -4,124 +4,364 @@ L2TP ==== -This document describes how to use the kernel's L2TP drivers to -provide L2TP functionality. L2TP is a protocol that tunnels one or -more sessions over an IP tunnel. It is commonly used for VPNs -(L2TP/IPSec) and by ISPs to tunnel subscriber PPP sessions over an IP -network infrastructure. With L2TPv3, it is also useful as a Layer-2 -tunneling infrastructure. - -Features +Layer 2 Tunneling Protocol (L2TP) allows L2 frames to be tunneled over +an IP network. + +This document covers the kernel's L2TP subsystem. It documents kernel +APIs for application developers who want to use the L2TP subsystem and +it provides some technical details about the internal implementation +which may be useful to kernel developers and maintainers. + +Overview ======== -L2TPv2 (PPP over L2TP (UDP tunnels)). -L2TPv3 ethernet pseudowires. -L2TPv3 PPP pseudowires. -L2TPv3 IP encapsulation. -Netlink sockets for L2TPv3 configuration management. - -History -======= - -The original pppol2tp driver was introduced in 2.6.23 and provided -L2TPv2 functionality (rfc2661). L2TPv2 is used to tunnel one or more PPP -sessions over a UDP tunnel. - -L2TPv3 (rfc3931) changes the protocol to allow different frame types -to be passed over an L2TP tunnel by moving the PPP-specific parts of -the protocol out of the core L2TP packet headers. Each frame type is -known as a pseudowire type. Ethernet, PPP, HDLC, Frame Relay and ATM -pseudowires for L2TP are defined in separate RFC standards. Another -change for L2TPv3 is that it can be carried directly over IP with no -UDP header (UDP is optional). It is also possible to create static -unmanaged L2TPv3 tunnels manually without a control protocol -(userspace daemon) to manage them. - -To support L2TPv3, the original pppol2tp driver was split up to -separate the L2TP and PPP functionality. Existing L2TPv2 userspace -apps should be unaffected as the original pppol2tp sockets API is -retained. L2TPv3, however, uses netlink to manage L2TPv3 tunnels and -sessions. - -Design -====== - -The L2TP protocol separates control and data frames. The L2TP kernel -drivers handle only L2TP data frames; control frames are always -handled by userspace. L2TP control frames carry messages between L2TP -clients/servers and are used to setup / teardown tunnels and -sessions. An L2TP client or server is implemented in userspace. - -Each L2TP tunnel is implemented using a UDP or L2TPIP socket; L2TPIP -provides L2TPv3 IP encapsulation (no UDP) and is implemented using a -new l2tpip socket family. The tunnel socket is typically created by -userspace, though for unmanaged L2TPv3 tunnels, the socket can also be -created by the kernel. Each L2TP session (pseudowire) gets a network -interface instance. In the case of PPP, these interfaces are created -indirectly by pppd using a pppol2tp socket. In the case of ethernet, -the netdevice is created upon a netlink request to create an L2TPv3 -ethernet pseudowire. - -For PPP, the PPPoL2TP driver, net/l2tp/l2tp_ppp.c, provides a -mechanism by which PPP frames carried through an L2TP session are -passed through the kernel's PPP subsystem. The standard PPP daemon, -pppd, handles all PPP interaction with the peer. PPP network -interfaces are created for each local PPP endpoint. The kernel's PPP -subsystem arranges for PPP control frames to be delivered to pppd, -while data frames are forwarded as usual. - -For ethernet, the L2TPETH driver, net/l2tp/l2tp_eth.c, implements a -netdevice driver, managing virtual ethernet devices, one per -pseudowire. These interfaces can be managed using standard Linux tools -such as "ip" and "ifconfig". If only IP frames are passed over the -tunnel, the interface can be given an IP addresses of itself and its -peer. If non-IP frames are to be passed over the tunnel, the interface -can be added to a bridge using brctl. All L2TP datapath protocol -functions are handled by the L2TP core driver. - -Each tunnel and session within a tunnel is assigned a unique tunnel_id -and session_id. These ids are carried in the L2TP header of every -control and data packet. (Actually, in L2TPv3, the tunnel_id isn't -present in data frames - it is inferred from the IP connection on -which the packet was received.) The L2TP driver uses the ids to lookup -internal tunnel and/or session contexts to determine how to handle the -packet. Zero tunnel / session ids are treated specially - zero ids are -never assigned to tunnels or sessions in the network. In the driver, -the tunnel context keeps a reference to the tunnel UDP or L2TPIP -socket. The session context holds data that lets the driver interface -to the kernel's network frame type subsystems, i.e. PPP, ethernet. - -Userspace Programming -===================== - -For L2TPv2, there are a number of requirements on the userspace L2TP -daemon in order to use the pppol2tp driver. - -1. Use a UDP socket per tunnel. - -2. Create a single PPPoL2TP socket per tunnel bound to a special null - session id. This is used only for communicating with the driver but - must remain open while the tunnel is active. Opening this tunnel - management socket causes the driver to mark the tunnel socket as an - L2TP UDP encapsulation socket and flags it for use by the - referenced tunnel id. This hooks up the UDP receive path via - udp_encap_rcv() in net/ipv4/udp.c. PPP data frames are never passed - in this special PPPoX socket. - -3. Create a PPPoL2TP socket per L2TP session. This is typically done - by starting pppd with the pppol2tp plugin and appropriate - arguments. A PPPoL2TP tunnel management socket (Step 2) must be - created before the first PPPoL2TP session socket is created. +The kernel's L2TP subsystem implements the datapath for L2TPv2 and +L2TPv3. L2TPv2 is carried over UDP. L2TPv3 is carried over UDP or +directly over IP (protocol 115). + +The L2TP RFCs define two basic kinds of L2TP packets: control packets +(the "control plane"), and data packets (the "data plane"). The kernel +deals only with data packets. The more complex control packets are +handled by user space. + +An L2TP tunnel carries one or more L2TP sessions. Each tunnel is +associated with a socket. Each session is associated with a virtual +netdevice, e.g. ``pppN``, ``l2tpethN``, through which data frames pass +to/from L2TP. Fields in the L2TP header identify the tunnel or session +and whether it is a control or data packet. When tunnels and sessions +are set up using the Linux kernel API, we're just setting up the L2TP +data path. All aspects of the control protocol are to be handled by +user space. + +This split in responsibilities leads to a natural sequence of +operations when establishing tunnels and sessions. The procedure looks +like this: + + 1) Create a tunnel socket. Exchange L2TP control protocol messages + with the peer over that socket in order to establish a tunnel. + + 2) Create a tunnel context in the kernel, using information + obtained from the peer using the control protocol messages. + + 3) Exchange L2TP control protocol messages with the peer over the + tunnel socket in order to establish a session. + + 4) Create a session context in the kernel using information + obtained from the peer using the control protocol messages. + +L2TP APIs +========= + +This section documents each userspace API of the L2TP subsystem. + +Tunnel Sockets +-------------- + +L2TPv2 always uses UDP. L2TPv3 may use UDP or IP encapsulation. + +To create a tunnel socket for use by L2TP, the standard POSIX +socket API is used. + +For example, for a tunnel using IPv4 addresses and UDP encapsulation:: + + int sockfd = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); + +Or for a tunnel using IPv6 addresses and IP encapsulation:: + + int sockfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP); + +UDP socket programming doesn't need to be covered here. + +IPPROTO_L2TP is an IP protocol type implemented by the kernel's L2TP +subsystem. The L2TPIP socket address is defined in struct +sockaddr_l2tpip and struct sockaddr_l2tpip6 at +`include/uapi/linux/l2tp.h`_. The address includes the L2TP tunnel +(connection) id. To use L2TP IP encapsulation, an L2TPv3 application +should bind the L2TPIP socket using the locally assigned +tunnel id. When the peer's tunnel id and IP address is known, a +connect must be done. + +If the L2TP application needs to handle L2TPv3 tunnel setup requests +from peers using L2TPIP, it must open a dedicated L2TPIP +socket to listen for those requests and bind the socket using tunnel +id 0 since tunnel setup requests are addressed to tunnel id 0. + +An L2TP tunnel and all of its sessions are automatically closed when +its tunnel socket is closed. + +Netlink API +----------- + +L2TP applications use netlink to manage L2TP tunnel and session +instances in the kernel. The L2TP netlink API is defined in +`include/uapi/linux/l2tp.h`_. + +L2TP uses `Generic Netlink`_ (GENL). Several commands are defined: +Create, Delete, Modify and Get for tunnel and session +instances, e.g. ``L2TP_CMD_TUNNEL_CREATE``. The API header lists the +netlink attribute types that can be used with each command. + +Tunnel and session instances are identified by a locally unique +32-bit id. L2TP tunnel ids are given by ``L2TP_ATTR_CONN_ID`` and +``L2TP_ATTR_PEER_CONN_ID`` attributes and L2TP session ids are given +by ``L2TP_ATTR_SESSION_ID`` and ``L2TP_ATTR_PEER_SESSION_ID`` +attributes. If netlink is used to manage L2TPv2 tunnel and session +instances, the L2TPv2 16-bit tunnel/session id is cast to a 32-bit +value in these attributes. + +In the ``L2TP_CMD_TUNNEL_CREATE`` command, ``L2TP_ATTR_FD`` tells the +kernel the tunnel socket fd being used. If not specified, the kernel +creates a kernel socket for the tunnel, using IP parameters set in +``L2TP_ATTR_IP[6]_SADDR``, ``L2TP_ATTR_IP[6]_DADDR``, +``L2TP_ATTR_UDP_SPORT``, ``L2TP_ATTR_UDP_DPORT`` attributes. Kernel +sockets are used to implement unmanaged L2TPv3 tunnels (iproute2's "ip +l2tp" commands). If ``L2TP_ATTR_FD`` is given, it must be a socket fd +that is already bound and connected. There is more information about +unmanaged tunnels later in this document. + +``L2TP_CMD_TUNNEL_CREATE`` attributes:- + +================== ======== === +Attribute Required Use +================== ======== === +CONN_ID Y Sets the tunnel (connection) id. +PEER_CONN_ID Y Sets the peer tunnel (connection) id. +PROTO_VERSION Y Protocol version. 2 or 3. +ENCAP_TYPE Y Encapsulation type: UDP or IP. +FD N Tunnel socket file descriptor. +UDP_CSUM N Enable IPv4 UDP checksums. Used only if FD is + not set. +UDP_ZERO_CSUM6_TX N Zero IPv6 UDP checksum on transmit. Used only + if FD is not set. +UDP_ZERO_CSUM6_RX N Zero IPv6 UDP checksum on receive. Used only if + FD is not set. +IP_SADDR N IPv4 source address. Used only if FD is not + set. +IP_DADDR N IPv4 destination address. Used only if FD is + not set. +UDP_SPORT N UDP source port. Used only if FD is not set. +UDP_DPORT N UDP destination port. Used only if FD is not + set. +IP6_SADDR N IPv6 source address. Used only if FD is not + set. +IP6_DADDR N IPv6 destination address. Used only if FD is + not set. +DEBUG N Debug flags. +================== ======== === + +``L2TP_CMD_TUNNEL_DESTROY`` attributes:- + +================== ======== === +Attribute Required Use +================== ======== === +CONN_ID Y Identifies the tunnel id to be destroyed. +================== ======== === + +``L2TP_CMD_TUNNEL_MODIFY`` attributes:- + +================== ======== === +Attribute Required Use +================== ======== === +CONN_ID Y Identifies the tunnel id to be modified. +DEBUG N Debug flags. +================== ======== === + +``L2TP_CMD_TUNNEL_GET`` attributes:- + +================== ======== === +Attribute Required Use +================== ======== === +CONN_ID N Identifies the tunnel id to be queried. + Ignored in DUMP requests. +================== ======== === + +``L2TP_CMD_SESSION_CREATE`` attributes:- + +================== ======== === +Attribute Required Use +================== ======== === +CONN_ID Y The parent tunnel id. +SESSION_ID Y Sets the session id. +PEER_SESSION_ID Y Sets the parent session id. +PW_TYPE Y Sets the pseudowire type. +DEBUG N Debug flags. +RECV_SEQ N Enable rx data sequence numbers. +SEND_SEQ N Enable tx data sequence numbers. +LNS_MODE N Enable LNS mode (auto-enable data sequence + numbers). +RECV_TIMEOUT N Timeout to wait when reordering received + packets. +L2SPEC_TYPE N Sets layer2-specific-sublayer type (L2TPv3 + only). +COOKIE N Sets optional cookie (L2TPv3 only). +PEER_COOKIE N Sets optional peer cookie (L2TPv3 only). +IFNAME N Sets interface name (L2TPv3 only). +================== ======== === + +For Ethernet session types, this will create an l2tpeth virtual +interface which can then be configured as required. For PPP session +types, a PPPoL2TP socket must also be opened and connected, mapping it +onto the new session. This is covered in "PPPoL2TP Sockets" later. + +``L2TP_CMD_SESSION_DESTROY`` attributes:- + +================== ======== === +Attribute Required Use +================== ======== === +CONN_ID Y Identifies the parent tunnel id of the session + to be destroyed. +SESSION_ID Y Identifies the session id to be destroyed. +IFNAME N Identifies the session by interface name. If + set, this overrides any CONN_ID and SESSION_ID + attributes. Currently supported for L2TPv3 + Ethernet sessions only. +================== ======== === + +``L2TP_CMD_SESSION_MODIFY`` attributes:- + +================== ======== === +Attribute Required Use +================== ======== === +CONN_ID Y Identifies the parent tunnel id of the session + to be modified. +SESSION_ID Y Identifies the session id to be modified. +IFNAME N Identifies the session by interface name. If + set, this overrides any CONN_ID and SESSION_ID + attributes. Currently supported for L2TPv3 + Ethernet sessions only. +DEBUG N Debug flags. +RECV_SEQ N Enable rx data sequence numbers. +SEND_SEQ N Enable tx data sequence numbers. +LNS_MODE N Enable LNS mode (auto-enable data sequence + numbers). +RECV_TIMEOUT N Timeout to wait when reordering received + packets. +================== ======== === + +``L2TP_CMD_SESSION_GET`` attributes:- + +================== ======== === +Attribute Required Use +================== ======== === +CONN_ID N Identifies the tunnel id to be queried. + Ignored for DUMP requests. +SESSION_ID N Identifies the session id to be queried. + Ignored for DUMP requests. +IFNAME N Identifies the session by interface name. + If set, this overrides any CONN_ID and + SESSION_ID attributes. Ignored for DUMP + requests. Currently supported for L2TPv3 + Ethernet sessions only. +================== ======== === + +Application developers should refer to `include/uapi/linux/l2tp.h`_ for +netlink command and attribute definitions. + +Sample userspace code using libmnl_: + + - Open L2TP netlink socket:: + + struct nl_sock *nl_sock; + int l2tp_nl_family_id; + + nl_sock = nl_socket_alloc(); + genl_connect(nl_sock); + genl_id = genl_ctrl_resolve(nl_sock, L2TP_GENL_NAME); + + - Create a tunnel:: + + struct nlmsghdr *nlh; + struct genlmsghdr *gnlh; + + nlh = mnl_nlmsg_put_header(buf); + nlh->nlmsg_type = genl_id; /* assigned to genl socket */ + nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK; + nlh->nlmsg_seq = seq; + + gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh)); + gnlh->cmd = L2TP_CMD_TUNNEL_CREATE; + gnlh->version = L2TP_GENL_VERSION; + gnlh->reserved = 0; + + mnl_attr_put_u32(nlh, L2TP_ATTR_FD, tunl_sock_fd); + mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid); + mnl_attr_put_u32(nlh, L2TP_ATTR_PEER_CONN_ID, peer_tid); + mnl_attr_put_u8(nlh, L2TP_ATTR_PROTO_VERSION, protocol_version); + mnl_attr_put_u16(nlh, L2TP_ATTR_ENCAP_TYPE, encap); + + - Create a session:: + + struct nlmsghdr *nlh; + struct genlmsghdr *gnlh; + + nlh = mnl_nlmsg_put_header(buf); + nlh->nlmsg_type = genl_id; /* assigned to genl socket */ + nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK; + nlh->nlmsg_seq = seq; + + gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh)); + gnlh->cmd = L2TP_CMD_SESSION_CREATE; + gnlh->version = L2TP_GENL_VERSION; + gnlh->reserved = 0; + + mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid); + mnl_attr_put_u32(nlh, L2TP_ATTR_PEER_CONN_ID, peer_tid); + mnl_attr_put_u32(nlh, L2TP_ATTR_SESSION_ID, sid); + mnl_attr_put_u32(nlh, L2TP_ATTR_PEER_SESSION_ID, peer_sid); + mnl_attr_put_u16(nlh, L2TP_ATTR_PW_TYPE, pwtype); + /* there are other session options which can be set using netlink + * attributes during session creation -- see l2tp.h + */ + + - Delete a session:: + + struct nlmsghdr *nlh; + struct genlmsghdr *gnlh; + + nlh = mnl_nlmsg_put_header(buf); + nlh->nlmsg_type = genl_id; /* assigned to genl socket */ + nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK; + nlh->nlmsg_seq = seq; + + gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh)); + gnlh->cmd = L2TP_CMD_SESSION_DELETE; + gnlh->version = L2TP_GENL_VERSION; + gnlh->reserved = 0; + + mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid); + mnl_attr_put_u32(nlh, L2TP_ATTR_SESSION_ID, sid); + + - Delete a tunnel and all of its sessions (if any):: + + struct nlmsghdr *nlh; + struct genlmsghdr *gnlh; + + nlh = mnl_nlmsg_put_header(buf); + nlh->nlmsg_type = genl_id; /* assigned to genl socket */ + nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK; + nlh->nlmsg_seq = seq; + + gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh)); + gnlh->cmd = L2TP_CMD_TUNNEL_DELETE; + gnlh->version = L2TP_GENL_VERSION; + gnlh->reserved = 0; + + mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid); + +PPPoL2TP Session Socket API +--------------------------- + +For PPP session types, a PPPoL2TP socket must be opened and connected +to the L2TP session. When creating PPPoL2TP sockets, the application provides information -to the driver about the socket in a socket connect() call. Source and -destination tunnel and session ids are provided, as well as the file -descriptor of a UDP socket. See struct pppol2tp_addr in -include/linux/if_pppol2tp.h. Note that zero tunnel / session ids are -treated specially. When creating the per-tunnel PPPoL2TP management -socket in Step 2 above, zero source and destination session ids are -specified, which tells the driver to prepare the supplied UDP file -descriptor for use as an L2TP tunnel socket. +to the kernel about the tunnel and session in a socket connect() +call. Source and destination tunnel and session ids are provided, as +well as the file descriptor of a UDP or L2TPIP socket. See struct +pppol2tp_addr in `include/linux/if_pppol2tp.h`_. For historical reasons, +there are unfortunately slightly different address structures for +L2TPv2/L2TPv3 IPv4/IPv6 tunnels and userspace must use the appropriate +structure that matches the tunnel socket type. Userspace may control behavior of the tunnel or session using setsockopt and ioctl on the PPPoX socket. The following socket @@ -130,229 +370,308 @@ options are supported:- ========= =========================================================== DEBUG bitmask of debug message categories. See below. SENDSEQ - 0 => don't send packets with sequence numbers - - 1 => send packets with sequence numbers + - 1 => send packets with sequence numbers RECVSEQ - 0 => receive packet sequence numbers are optional - - 1 => drop receive packets without sequence numbers + - 1 => drop receive packets without sequence numbers LNSMODE - 0 => act as LAC. - - 1 => act as LNS. + - 1 => act as LNS. REORDERTO reorder timeout (in millisecs). If 0, don't try to reorder. ========= =========================================================== -Only the DEBUG option is supported by the special tunnel management -PPPoX socket. - In addition to the standard PPP ioctls, a PPPIOCGL2TPSTATS is provided to retrieve tunnel and session statistics from the kernel using the PPPoX socket of the appropriate tunnel or session. -For L2TPv3, userspace must use the netlink API defined in -include/linux/l2tp.h to manage tunnel and session contexts. The -general procedure to create a new L2TP tunnel with one session is:- - -1. Open a GENL socket using L2TP_GENL_NAME for configuring the kernel - using netlink. - -2. Create a UDP or L2TPIP socket for the tunnel. - -3. Create a new L2TP tunnel using a L2TP_CMD_TUNNEL_CREATE - request. Set attributes according to desired tunnel parameters, - referencing the UDP or L2TPIP socket created in the previous step. - -4. Create a new L2TP session in the tunnel using a - L2TP_CMD_SESSION_CREATE request. - -The tunnel and all of its sessions are closed when the tunnel socket -is closed. The netlink API may also be used to delete sessions and -tunnels. Configuration and status info may be set or read using netlink. - -The L2TP driver also supports static (unmanaged) L2TPv3 tunnels. These -are where there is no L2TP control message exchange with the peer to -setup the tunnel; the tunnel is configured manually at each end of the -tunnel. There is no need for an L2TP userspace application in this -case -- the tunnel socket is created by the kernel and configured -using parameters sent in the L2TP_CMD_TUNNEL_CREATE netlink -request. The "ip" utility of iproute2 has commands for managing static -L2TPv3 tunnels; do "ip l2tp help" for more information. +Sample userspace code: + + - Create session PPPoX data socket:: + + struct sockaddr_pppol2tp sax; + int fd; + + /* Note, the tunnel socket must be bound already, else it + * will not be ready + */ + sax.sa_family = AF_PPPOX; + sax.sa_protocol = PX_PROTO_OL2TP; + sax.pppol2tp.fd = tunnel_fd; + sax.pppol2tp.addr.sin_addr.s_addr = addr->sin_addr.s_addr; + sax.pppol2tp.addr.sin_port = addr->sin_port; + sax.pppol2tp.addr.sin_family = AF_INET; + sax.pppol2tp.s_tunnel = tunnel_id; + sax.pppol2tp.s_session = session_id; + sax.pppol2tp.d_tunnel = peer_tunnel_id; + sax.pppol2tp.d_session = peer_session_id; + + /* session_fd is the fd of the session's PPPoL2TP socket. + * tunnel_fd is the fd of the tunnel UDP / L2TPIP socket. + */ + fd = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax)); + if (fd < 0 ) { + return -errno; + } + return 0; + +Old L2TPv2-only API +------------------- + +When L2TP was first added to the Linux kernel in 2.6.23, it +implemented only L2TPv2 and did not include a netlink API. Instead, +tunnel and session instances in the kernel were managed directly using +only PPPoL2TP sockets. The PPPoL2TP socket is used as described in +section "PPPoL2TP Session Socket API" but tunnel and session instances +are automatically created on a connect() of the socket instead of +being created by a separate netlink request: + + - Tunnels are managed using a tunnel management socket which is a + dedicated PPPoL2TP socket, connected to (invalid) session + id 0. The L2TP tunnel instance is created when the PPPoL2TP + tunnel management socket is connected and is destroyed when the + socket is closed. + + - Session instances are created in the kernel when a PPPoL2TP + socket is connected to a non-zero session id. Session parameters + are set using setsockopt. The L2TP session instance is destroyed + when the socket is closed. + +This API is still supported but its use is discouraged. Instead, new +L2TPv2 applications should use netlink to first create the tunnel and +session, then create a PPPoL2TP socket for the session. + +Unmanaged L2TPv3 tunnels +------------------------ + +The kernel L2TP subsystem also supports static (unmanaged) L2TPv3 +tunnels. Unmanaged tunnels have no userspace tunnel socket, and +exchange no control messages with the peer to set up the tunnel; the +tunnel is configured manually at each end of the tunnel. All +configuration is done using netlink. There is no need for an L2TP +userspace application in this case -- the tunnel socket is created by +the kernel and configured using parameters sent in the +``L2TP_CMD_TUNNEL_CREATE`` netlink request. The ``ip`` utility of +``iproute2`` has commands for managing static L2TPv3 tunnels; do ``ip +l2tp help`` for more information. Debugging -========= - -The driver supports a flexible debug scheme where kernel trace -messages may be optionally enabled per tunnel and per session. Care is -needed when debugging a live system since the messages are not -rate-limited and a busy system could be swamped. Userspace uses -setsockopt on the PPPoX socket to set a debug mask. +--------- -The following debug mask bits are available: +The L2TP subsystem offers a range of debugging interfaces through the +debugfs filesystem. -================ ============================== -L2TP_MSG_DEBUG verbose debug (if compiled in) -L2TP_MSG_CONTROL userspace - kernel interface -L2TP_MSG_SEQ sequence numbers handling -L2TP_MSG_DATA data packets -================ ============================== +To access these interfaces, the debugfs filesystem must first be mounted:: -If enabled, files under a l2tp debugfs directory can be used to dump -kernel state about L2TP tunnels and sessions. To access it, the -debugfs filesystem must first be mounted:: + # mount -t debugfs debugfs /debug - # mount -t debugfs debugfs /debug +Files under the l2tp directory can then be accessed, providing a summary +of the current population of tunnel and session contexts existing in the +kernel:: -Files under the l2tp directory can then be accessed:: - - # cat /debug/l2tp/tunnels + # cat /debug/l2tp/tunnels The debugfs files should not be used by applications to obtain L2TP state information because the file format is subject to change. It is implemented to provide extra debug information to help diagnose -problems.) Users should use the netlink API. +problems. Applications should instead use the netlink API. -/proc/net/pppol2tp is also provided for backwards compatibility with -the original pppol2tp driver. It lists information about L2TPv2 -tunnels and sessions only. Its use is discouraged. +In addition the L2TP subsystem implements tracepoints using the standard +kernel event tracing API. The available L2TP events can be reviewed as +follows:: -Unmanaged L2TPv3 Tunnels -======================== - -Some commercial L2TP products support unmanaged L2TPv3 ethernet -tunnels, where there is no L2TP control protocol; tunnels are -configured at each side manually. New commands are available in -iproute2's ip utility to support this. - -To create an L2TPv3 ethernet pseudowire between local host 192.168.1.1 -and peer 192.168.1.2, using IP addresses 10.5.1.1 and 10.5.1.2 for the -tunnel endpoints:: - - # ip l2tp add tunnel tunnel_id 1 peer_tunnel_id 1 udp_sport 5000 \ - udp_dport 5000 encap udp local 192.168.1.1 remote 192.168.1.2 - # ip l2tp add session tunnel_id 1 session_id 1 peer_session_id 1 - # ip -s -d show dev l2tpeth0 - # ip addr add 10.5.1.2/32 peer 10.5.1.1/32 dev l2tpeth0 - # ip li set dev l2tpeth0 up - -Choose IP addresses to be the address of a local IP interface and that -of the remote system. The IP addresses of the l2tpeth0 interface can be -anything suitable. - -Repeat the above at the peer, with ports, tunnel/session ids and IP -addresses reversed. The tunnel and session IDs can be any non-zero -32-bit number, but the values must be reversed at the peer. - -======================== =================== -Host 1 Host2 -======================== =================== -udp_sport=5000 udp_sport=5001 -udp_dport=5001 udp_dport=5000 -tunnel_id=42 tunnel_id=45 -peer_tunnel_id=45 peer_tunnel_id=42 -session_id=128 session_id=5196755 -peer_session_id=5196755 peer_session_id=128 -======================== =================== - -When done at both ends of the tunnel, it should be possible to send -data over the network. e.g.:: - - # ping 10.5.1.1 - - -Sample Userspace Code -===================== - -1. Create tunnel management PPPoX socket:: - - kernel_fd = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP); - if (kernel_fd >= 0) { - struct sockaddr_pppol2tp sax; - struct sockaddr_in const *peer_addr; - - peer_addr = l2tp_tunnel_get_peer_addr(tunnel); - memset(&sax, 0, sizeof(sax)); - sax.sa_family = AF_PPPOX; - sax.sa_protocol = PX_PROTO_OL2TP; - sax.pppol2tp.fd = udp_fd; /* fd of tunnel UDP socket */ - sax.pppol2tp.addr.sin_addr.s_addr = peer_addr->sin_addr.s_addr; - sax.pppol2tp.addr.sin_port = peer_addr->sin_port; - sax.pppol2tp.addr.sin_family = AF_INET; - sax.pppol2tp.s_tunnel = tunnel_id; - sax.pppol2tp.s_session = 0; /* special case: mgmt socket */ - sax.pppol2tp.d_tunnel = 0; - sax.pppol2tp.d_session = 0; /* special case: mgmt socket */ - - if(connect(kernel_fd, (struct sockaddr *)&sax, sizeof(sax) ) < 0 ) { - perror("connect failed"); - result = -errno; - goto err; - } - } - -2. Create session PPPoX data socket:: - - struct sockaddr_pppol2tp sax; - int fd; - - /* Note, the target socket must be bound already, else it will not be ready */ - sax.sa_family = AF_PPPOX; - sax.sa_protocol = PX_PROTO_OL2TP; - sax.pppol2tp.fd = tunnel_fd; - sax.pppol2tp.addr.sin_addr.s_addr = addr->sin_addr.s_addr; - sax.pppol2tp.addr.sin_port = addr->sin_port; - sax.pppol2tp.addr.sin_family = AF_INET; - sax.pppol2tp.s_tunnel = tunnel_id; - sax.pppol2tp.s_session = session_id; - sax.pppol2tp.d_tunnel = peer_tunnel_id; - sax.pppol2tp.d_session = peer_session_id; - - /* session_fd is the fd of the session's PPPoL2TP socket. - * tunnel_fd is the fd of the tunnel UDP socket. - */ - fd = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax)); - if (fd < 0 ) { - return -errno; - } - return 0; + # find /debug/tracing/events/l2tp + +Finally, /proc/net/pppol2tp is also provided for backwards compatibility +with the original pppol2tp code. It lists information about L2TPv2 +tunnels and sessions only. Its use is discouraged. Internal Implementation ======================= -The driver keeps a struct l2tp_tunnel context per L2TP tunnel and a -struct l2tp_session context for each session. The l2tp_tunnel is -always associated with a UDP or L2TP/IP socket and keeps a list of -sessions in the tunnel. The l2tp_session context keeps kernel state -about the session. It has private data which is used for data specific -to the session type. With L2TPv2, the session always carried PPP -traffic. With L2TPv3, the session can also carry ethernet frames -(ethernet pseudowire) or other data types such as ATM, HDLC or Frame -Relay. - -When a tunnel is first opened, the reference count on the socket is -increased using sock_hold(). This ensures that the kernel socket -cannot be removed while L2TP's data structures reference it. - -Some L2TP sessions also have a socket (PPP pseudowires) while others -do not (ethernet pseudowires). We can't use the socket reference count -as the reference count for session contexts. The L2TP implementation -therefore has its own internal reference counts on the session -contexts. - -To Do -===== - -Add L2TP tunnel switching support. This would route tunneled traffic -from one L2TP tunnel into another. Specified in -http://tools.ietf.org/html/draft-ietf-l2tpext-tunnel-switching-08 - -Add L2TPv3 VLAN pseudowire support. - -Add L2TPv3 IP pseudowire support. - -Add L2TPv3 ATM pseudowire support. +This section is for kernel developers and maintainers. + +Sockets +------- + +UDP sockets are implemented by the networking core. When an L2TP +tunnel is created using a UDP socket, the socket is set up as an +encapsulated UDP socket by setting encap_rcv and encap_destroy +callbacks on the UDP socket. l2tp_udp_encap_recv is called when +packets are received on the socket. l2tp_udp_encap_destroy is called +when userspace closes the socket. + +L2TPIP sockets are implemented in `net/l2tp/l2tp_ip.c`_ and +`net/l2tp/l2tp_ip6.c`_. + +Tunnels +------- + +The kernel keeps a struct l2tp_tunnel context per L2TP tunnel. The +l2tp_tunnel is always associated with a UDP or L2TP/IP socket and +keeps a list of sessions in the tunnel. When a tunnel is first +registered with L2TP core, the reference count on the socket is +increased. This ensures that the socket cannot be removed while L2TP's +data structures reference it. + +Tunnels are identified by a unique tunnel id. The id is 16-bit for +L2TPv2 and 32-bit for L2TPv3. Internally, the id is stored as a 32-bit +value. + +Tunnels are kept in a per-net list, indexed by tunnel id. The tunnel +id namespace is shared by L2TPv2 and L2TPv3. The tunnel context can be +derived from the socket's sk_user_data. + +Handling tunnel socket close is perhaps the most tricky part of the +L2TP implementation. If userspace closes a tunnel socket, the L2TP +tunnel and all of its sessions must be closed and destroyed. Since the +tunnel context holds a ref on the tunnel socket, the socket's +sk_destruct won't be called until the tunnel sock_put's its +socket. For UDP sockets, when userspace closes the tunnel socket, the +socket's encap_destroy handler is invoked, which L2TP uses to initiate +its tunnel close actions. For L2TPIP sockets, the socket's close +handler initiates the same tunnel close actions. All sessions are +first closed. Each session drops its tunnel ref. When the tunnel ref +reaches zero, the tunnel puts its socket ref. When the socket is +eventually destroyed, it's sk_destruct finally frees the L2TP tunnel +context. + +Sessions +-------- + +The kernel keeps a struct l2tp_session context for each session. Each +session has private data which is used for data specific to the +session type. With L2TPv2, the session always carries PPP +traffic. With L2TPv3, the session can carry Ethernet frames (Ethernet +pseudowire) or other data types such as PPP, ATM, HDLC or Frame +Relay. Linux currently implements only Ethernet and PPP session types. + +Some L2TP session types also have a socket (PPP pseudowires) while +others do not (Ethernet pseudowires). We can't therefore use the +socket reference count as the reference count for session +contexts. The L2TP implementation therefore has its own internal +reference counts on the session contexts. + +Like tunnels, L2TP sessions are identified by a unique +session id. Just as with tunnel ids, the session id is 16-bit for +L2TPv2 and 32-bit for L2TPv3. Internally, the id is stored as a 32-bit +value. + +Sessions hold a ref on their parent tunnel to ensure that the tunnel +stays extant while one or more sessions references it. + +Sessions are kept in a per-tunnel list, indexed by session id. L2TPv3 +sessions are also kept in a per-net list indexed by session id, +because L2TPv3 session ids are unique across all tunnels and L2TPv3 +data packets do not contain a tunnel id in the header. This list is +therefore needed to find the session context associated with a +received data packet when the tunnel context cannot be derived from +the tunnel socket. + +Although the L2TPv3 RFC specifies that L2TPv3 session ids are not +scoped by the tunnel, the kernel does not police this for L2TPv3 UDP +tunnels and does not add sessions of L2TPv3 UDP tunnels into the +per-net session list. In the UDP receive code, we must trust that the +tunnel can be identified using the tunnel socket's sk_user_data and +lookup the session in the tunnel's session list instead of the per-net +session list. + +PPP +--- + +`net/l2tp/l2tp_ppp.c`_ implements the PPPoL2TP socket family. Each PPP +session has a PPPoL2TP socket. + +The PPPoL2TP socket's sk_user_data references the l2tp_session. + +Userspace sends and receives PPP packets over L2TP using a PPPoL2TP +socket. Only PPP control frames pass over this socket: PPP data +packets are handled entirely by the kernel, passing between the L2TP +session and its associated ``pppN`` netdev through the PPP channel +interface of the kernel PPP subsystem. + +The L2TP PPP implementation handles the closing of a PPPoL2TP socket +by closing its corresponding L2TP session. This is complicated because +it must consider racing with netlink session create/destroy requests +and pppol2tp_connect trying to reconnect with a session that is in the +process of being closed. Unlike tunnels, PPP sessions do not hold a +ref on their associated socket, so code must be careful to sock_hold +the socket where necessary. For all the details, see commit +3d609342cc04129ff7568e19316ce3d7451a27e8. + +Ethernet +-------- + +`net/l2tp/l2tp_eth.c`_ implements L2TPv3 Ethernet pseudowires. It +manages a netdev for each session. + +L2TP Ethernet sessions are created and destroyed by netlink request, +or are destroyed when the tunnel is destroyed. Unlike PPP sessions, +Ethernet sessions do not have an associated socket. Miscellaneous ============= -The L2TP drivers were developed as part of the OpenL2TP project by -Katalix Systems Ltd. OpenL2TP is a full-featured L2TP client / server, -designed from the ground up to have the L2TP datapath in the -kernel. The project also implemented the pppol2tp plugin for pppd -which allows pppd to use the kernel driver. Details can be found at -http://www.openl2tp.org. +RFCs +---- + +The kernel code implements the datapath features specified in the +following RFCs: + +======= =============== =================================== +RFC2661 L2TPv2 https://tools.ietf.org/html/rfc2661 +RFC3931 L2TPv3 https://tools.ietf.org/html/rfc3931 +RFC4719 L2TPv3 Ethernet https://tools.ietf.org/html/rfc4719 +======= =============== =================================== + +Implementations +--------------- + +A number of open source applications use the L2TP kernel subsystem: + +============ ============================================== +iproute2 https://github.com/shemminger/iproute2 +go-l2tp https://github.com/katalix/go-l2tp +tunneldigger https://github.com/wlanslovenija/tunneldigger +xl2tpd https://github.com/xelerance/xl2tpd +============ ============================================== + +Limitations +----------- + +The current implementation has a number of limitations: + + 1) Multiple UDP sockets with the same 5-tuple address cannot be + used. The kernel's tunnel context is identified using private + data associated with the socket so it is important that each + socket is uniquely identified by its address. + + 2) Interfacing with openvswitch is not yet implemented. It may be + useful to map OVS Ethernet and VLAN ports into L2TPv3 tunnels. + + 3) VLAN pseudowires are implemented using an ``l2tpethN`` interface + configured with a VLAN sub-interface. Since L2TPv3 VLAN + pseudowires carry one and only one VLAN, it may be better to use + a single netdevice rather than an ``l2tpethN`` and ``l2tpethN``:M + pair per VLAN session. The netlink attribute + ``L2TP_ATTR_VLAN_ID`` was added for this, but it was never + implemented. + +Testing +------- + +Unmanaged L2TPv3 Ethernet features are tested by the kernel's built-in +selftests. See `tools/testing/selftests/net/l2tp.sh`_. + +Another test suite, l2tp-ktest_, covers all +of the L2TP APIs and tunnel/session types. This may be integrated into +the kernel's built-in L2TP selftests in the future. + +.. Links +.. _Generic Netlink: generic_netlink.html +.. _libmnl: https://www.netfilter.org/projects/libmnl +.. _include/uapi/linux/l2tp.h: ../../../include/uapi/linux/l2tp.h +.. _include/linux/if_pppol2tp.h: ../../../include/linux/if_pppol2tp.h +.. _net/l2tp/l2tp_ip.c: ../../../net/l2tp/l2tp_ip.c +.. _net/l2tp/l2tp_ip6.c: ../../../net/l2tp/l2tp_ip6.c +.. _net/l2tp/l2tp_ppp.c: ../../../net/l2tp/l2tp_ppp.c +.. _net/l2tp/l2tp_eth.c: ../../../net/l2tp/l2tp_eth.c +.. _tools/testing/selftests/net/l2tp.sh: ../../../tools/testing/selftests/net/l2tp.sh +.. _l2tp-ktest: https://github.com/katalix/l2tp-ktest diff --git a/Documentation/networking/nf_flowtable.rst b/Documentation/networking/nf_flowtable.rst index b6e1fa141aae..6cdf9a1724b6 100644 --- a/Documentation/networking/nf_flowtable.rst +++ b/Documentation/networking/nf_flowtable.rst @@ -109,7 +109,7 @@ More reading This documentation is based on the LWN.net articles [1]_\ [2]_. Rafal Milecki also made a very complete and comprehensive summary called "A state of network acceleration" that describes how things were before this infrastructure was -mailined [3]_ and it also makes a rough summary of this work [4]_. +mainlined [3]_ and it also makes a rough summary of this work [4]_. .. [1] https://lwn.net/Articles/738214/ .. [2] https://lwn.net/Articles/742164/ diff --git a/Documentation/networking/scaling.rst b/Documentation/networking/scaling.rst index 8f0347b9fb3d..3d435caa3ef2 100644 --- a/Documentation/networking/scaling.rst +++ b/Documentation/networking/scaling.rst @@ -465,9 +465,9 @@ XPS Configuration ----------------- XPS is only available if the kconfig symbol CONFIG_XPS is enabled (on by -default for SMP). The functionality remains disabled until explicitly -configured. To enable XPS, the bitmap of CPUs/receive-queues that may -use a transmit queue is configured using the sysfs file entry: +default for SMP). If compiled in, it is driver dependent whether, and +how, XPS is configured at device init. The mapping of CPUs/receive-queues +to transmit queue can be inspected and configured using sysfs: For selection based on CPUs map:: diff --git a/Documentation/networking/statistics.rst b/Documentation/networking/statistics.rst new file mode 100644 index 000000000000..8e15bc98830b --- /dev/null +++ b/Documentation/networking/statistics.rst @@ -0,0 +1,179 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +Interface statistics +==================== + +Overview +======== + +This document is a guide to Linux network interface statistics. + +There are three main sources of interface statistics in Linux: + + - standard interface statistics based on + :c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>`; + - protocol-specific statistics; and + - driver-defined statistics available via ethtool. + +Standard interface statistics +----------------------------- + +There are multiple interfaces to reach the standard statistics. +Most commonly used is the `ip` command from `iproute2`:: + + $ ip -s -s link show dev ens4u1u1 + 6: ens4u1u1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 + link/ether 48:2a:e3:4c:b1:d1 brd ff:ff:ff:ff:ff:ff + RX: bytes packets errors dropped overrun mcast + 74327665117 69016965 0 0 0 0 + RX errors: length crc frame fifo missed + 0 0 0 0 0 + TX: bytes packets errors dropped carrier collsns + 21405556176 44608960 0 0 0 0 + TX errors: aborted fifo window heartbeat transns + 0 0 0 0 128 + altname enp58s0u1u1 + +Note that `-s` has been specified twice to see all members of +:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>`. +If `-s` is specified once the detailed errors won't be shown. + +`ip` supports JSON formatting via the `-j` option. + +Protocol-specific statistics +---------------------------- + +Some of the interfaces used for configuring devices are also able +to report related statistics. For example ethtool interface used +to configure pause frames can report corresponding hardware counters:: + + $ ethtool --include-statistics -a eth0 + Pause parameters for eth0: + Autonegotiate: on + RX: on + TX: on + Statistics: + tx_pause_frames: 1 + rx_pause_frames: 1 + +Driver-defined statistics +------------------------- + +Driver-defined ethtool statistics can be dumped using `ethtool -S $ifc`, e.g.:: + + $ ethtool -S ens4u1u1 + NIC statistics: + tx_single_collisions: 0 + tx_multi_collisions: 0 + +uAPIs +===== + +procfs +------ + +The historical `/proc/net/dev` text interface gives access to the list +of interfaces as well as their statistics. + +Note that even though this interface is using +:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>` +internally it combines some of the fields. + +sysfs +----- + +Each device directory in sysfs contains a `statistics` directory (e.g. +`/sys/class/net/lo/statistics/`) with files corresponding to +members of :c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>`. + +This simple interface is convenient especially in constrained/embedded +environments without access to tools. However, it's inefficient when +reading multiple stats as it internally performs a full dump of +:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>` +and reports only the stat corresponding to the accessed file. + +Sysfs files are documented in +`Documentation/ABI/testing/sysfs-class-net-statistics`. + + +netlink +------- + +`rtnetlink` (`NETLINK_ROUTE`) is the preferred method of accessing +:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>` stats. + +Statistics are reported both in the responses to link information +requests (`RTM_GETLINK`) and statistic requests (`RTM_GETSTATS`, +when `IFLA_STATS_LINK_64` bit is set in the `.filter_mask` of the request). + +ethtool +------- + +Ethtool IOCTL interface allows drivers to report implementation +specific statistics. Historically it has also been used to report +statistics for which other APIs did not exist, like per-device-queue +statistics, or standard-based statistics (e.g. RFC 2863). + +Statistics and their string identifiers are retrieved separately. +Identifiers via `ETHTOOL_GSTRINGS` with `string_set` set to `ETH_SS_STATS`, +and values via `ETHTOOL_GSTATS`. User space should use `ETHTOOL_GDRVINFO` +to retrieve the number of statistics (`.n_stats`). + +ethtool-netlink +--------------- + +Ethtool netlink is a replacement for the older IOCTL interface. + +Protocol-related statistics can be requested in get commands by setting +the `ETHTOOL_FLAG_STATS` flag in `ETHTOOL_A_HEADER_FLAGS`. Currently +statistics are supported in the following commands: + + - `ETHTOOL_MSG_PAUSE_GET` + +debugfs +------- + +Some drivers expose extra statistics via `debugfs`. + +struct rtnl_link_stats64 +======================== + +.. kernel-doc:: include/uapi/linux/if_link.h + :identifiers: rtnl_link_stats64 + +Notes for driver authors +======================== + +Drivers should report all statistics which have a matching member in +:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>` exclusively +via `.ndo_get_stats64`. Reporting such standard stats via ethtool +or debugfs will not be accepted. + +Drivers must ensure best possible compliance with +:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>`. +Please note for example that detailed error statistics must be +added into the general `rx_error` / `tx_error` counters. + +The `.ndo_get_stats64` callback can not sleep because of accesses +via `/proc/net/dev`. If driver may sleep when retrieving the statistics +from the device it should do so periodically asynchronously and only return +a recent copy from `.ndo_get_stats64`. Ethtool interrupt coalescing interface +allows setting the frequency of refreshing statistics, if needed. + +Retrieving ethtool statistics is a multi-syscall process, drivers are advised +to keep the number of statistics constant to avoid race conditions with +user space trying to read them. + +Statistics must persist across routine operations like bringing the interface +down and up. + +Kernel-internal data structures +------------------------------- + +The following structures are internal to the kernel, their members are +translated to netlink attributes when dumped. Drivers must not overwrite +the statistics they don't report with 0. + +.. kernel-doc:: include/linux/ethtool.h + :identifiers: ethtool_pause_stats diff --git a/Documentation/filesystems/sysfs-tagging.rst b/Documentation/networking/sysfs-tagging.rst index 83647e10c207..83647e10c207 100644 --- a/Documentation/filesystems/sysfs-tagging.rst +++ b/Documentation/networking/sysfs-tagging.rst diff --git a/Documentation/networking/vxlan.rst b/Documentation/networking/vxlan.rst index ce239fa01848..2759dc1cc525 100644 --- a/Documentation/networking/vxlan.rst +++ b/Documentation/networking/vxlan.rst @@ -58,3 +58,31 @@ forwarding table using the new bridge command. 3. Show forwarding table:: # bridge fdb show dev vxlan0 + +The following NIC features may indicate support for UDP tunnel-related +offloads (most commonly VXLAN features, but support for a particular +encapsulation protocol is NIC specific): + + - `tx-udp_tnl-segmentation` + - `tx-udp_tnl-csum-segmentation` + ability to perform TCP segmentation offload of UDP encapsulated frames + + - `rx-udp_tunnel-port-offload` + receive side parsing of UDP encapsulated frames which allows NICs to + perform protocol-aware offloads, like checksum validation offload of + inner frames (only needed by NICs without protocol-agnostic offloads) + +For devices supporting `rx-udp_tunnel-port-offload` the list of currently +offloaded ports can be interrogated with `ethtool`:: + + $ ethtool --show-tunnels eth0 + Tunnel information for eth0: + UDP port table 0: + Size: 4 + Types: vxlan + No entries + UDP port table 1: + Size: 4 + Types: geneve, vxlan-gpe + Entries (1): + port 1230, vxlan-gpe diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst index 1831e431f725..b04fb18cc4e2 100644 --- a/Documentation/power/pci.rst +++ b/Documentation/power/pci.rst @@ -320,7 +320,7 @@ that these callbacks operate on:: unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* D1 and D2 are forbidden */ unsigned int wakeup_prepared:1; /* Device prepared for wake up */ - unsigned int d3_delay; /* D3->D0 transition time in ms */ + unsigned int d3hot_delay; /* D3hot->D0 transition time in ms */ ... }; diff --git a/Documentation/powerpc/booting.rst b/Documentation/powerpc/booting.rst new file mode 100644 index 000000000000..2d0ec2ff2b57 --- /dev/null +++ b/Documentation/powerpc/booting.rst @@ -0,0 +1,110 @@ +.. SPDX-License-Identifier: GPL-2.0 + +DeviceTree Booting +------------------ + +During the development of the Linux/ppc64 kernel, and more specifically, the +addition of new platform types outside of the old IBM pSeries/iSeries pair, it +was decided to enforce some strict rules regarding the kernel entry and +bootloader <-> kernel interfaces, in order to avoid the degeneration that had +become the ppc32 kernel entry point and the way a new platform should be added +to the kernel. The legacy iSeries platform breaks those rules as it predates +this scheme, but no new board support will be accepted in the main tree that +doesn't follow them properly. In addition, since the advent of the arch/powerpc +merged architecture for ppc32 and ppc64, new 32-bit platforms and 32-bit +platforms which move into arch/powerpc will be required to use these rules as +well. + +The main requirement that will be defined in more detail below is the presence +of a device-tree whose format is defined after Open Firmware specification. +However, in order to make life easier to embedded board vendors, the kernel +doesn't require the device-tree to represent every device in the system and only +requires some nodes and properties to be present. For example, the kernel does +not require you to create a node for every PCI device in the system. It is a +requirement to have a node for PCI host bridges in order to provide interrupt +routing information and memory/IO ranges, among others. It is also recommended +to define nodes for on chip devices and other buses that don't specifically fit +in an existing OF specification. This creates a great flexibility in the way the +kernel can then probe those and match drivers to device, without having to hard +code all sorts of tables. It also makes it more flexible for board vendors to do +minor hardware upgrades without significantly impacting the kernel code or +cluttering it with special cases. + + +Entry point +~~~~~~~~~~~ + +There is one single entry point to the kernel, at the start +of the kernel image. That entry point supports two calling +conventions: + + a) Boot from Open Firmware. If your firmware is compatible + with Open Firmware (IEEE 1275) or provides an OF compatible + client interface API (support for "interpret" callback of + forth words isn't required), you can enter the kernel with: + + r5 : OF callback pointer as defined by IEEE 1275 + bindings to powerpc. Only the 32-bit client interface + is currently supported + + r3, r4 : address & length of an initrd if any or 0 + + The MMU is either on or off; the kernel will run the + trampoline located in arch/powerpc/kernel/prom_init.c to + extract the device-tree and other information from open + firmware and build a flattened device-tree as described + in b). prom_init() will then re-enter the kernel using + the second method. This trampoline code runs in the + context of the firmware, which is supposed to handle all + exceptions during that time. + + b) Direct entry with a flattened device-tree block. This entry + point is called by a) after the OF trampoline and can also be + called directly by a bootloader that does not support the Open + Firmware client interface. It is also used by "kexec" to + implement "hot" booting of a new kernel from a previous + running one. This method is what I will describe in more + details in this document, as method a) is simply standard Open + Firmware, and thus should be implemented according to the + various standard documents defining it and its binding to the + PowerPC platform. The entry point definition then becomes: + + r3 : physical pointer to the device-tree block + (defined in chapter II) in RAM + + r4 : physical pointer to the kernel itself. This is + used by the assembly code to properly disable the MMU + in case you are entering the kernel with MMU enabled + and a non-1:1 mapping. + + r5 : NULL (as to differentiate with method a) + +Note about SMP entry: Either your firmware puts your other +CPUs in some sleep loop or spin loop in ROM where you can get +them out via a soft reset or some other means, in which case +you don't need to care, or you'll have to enter the kernel +with all CPUs. The way to do that with method b) will be +described in a later revision of this document. + +Board supports (platforms) are not exclusive config options. An +arbitrary set of board supports can be built in a single kernel +image. The kernel will "know" what set of functions to use for a +given platform based on the content of the device-tree. Thus, you +should: + + a) add your platform support as a _boolean_ option in + arch/powerpc/Kconfig, following the example of PPC_PSERIES, + PPC_PMAC and PPC_MAPLE. The later is probably a good + example of a board support to start from. + + b) create your main platform file as + "arch/powerpc/platforms/myplatform/myboard_setup.c" and add it + to the Makefile under the condition of your ``CONFIG_`` + option. This file will define a structure of type "ppc_md" + containing the various callbacks that the generic code will + use to get to your platform specific code + +A kernel image may support multiple platforms, but only if the +platforms feature the same core architecture. A single kernel build +cannot support both configurations with Book E and configurations +with classic Powerpc architectures. diff --git a/Documentation/powerpc/index.rst b/Documentation/powerpc/index.rst index 748bf483b1c2..6ec64b0d5257 100644 --- a/Documentation/powerpc/index.rst +++ b/Documentation/powerpc/index.rst @@ -7,6 +7,7 @@ powerpc .. toctree:: :maxdepth: 1 + booting bootwrapper cpu_families cpu_features diff --git a/Documentation/powerpc/isa-versions.rst b/Documentation/powerpc/isa-versions.rst index a363d8c1603c..dfcb1097dce4 100644 --- a/Documentation/powerpc/isa-versions.rst +++ b/Documentation/powerpc/isa-versions.rst @@ -7,6 +7,7 @@ Mapping of some CPU versions to relevant ISA versions. ========= ==================================================================== CPU Architecture version ========= ==================================================================== +Power10 Power ISA v3.1 Power9 Power ISA v3.0B Power8 Power ISA v2.07 Power7 Power ISA v2.06 @@ -32,6 +33,7 @@ Key Features ========== ================== CPU VMX (aka. Altivec) ========== ================== +Power10 Yes Power9 Yes Power8 Yes Power7 Yes @@ -47,6 +49,7 @@ PPC970 Yes ========== ==== CPU VSX ========== ==== +Power10 Yes Power9 Yes Power8 Yes Power7 Yes @@ -62,6 +65,7 @@ PPC970 No ========== ==================================== CPU Transactional Memory ========== ==================================== +Power10 No (* see Power ISA v3.1, "Appendix A. Notes on the Removal of Transactional Memory from the Architecture") Power9 Yes (* see transactional_memory.txt) Power8 Yes Power7 No diff --git a/Documentation/powerpc/ptrace.rst b/Documentation/powerpc/ptrace.rst index 864d4b6dddd1..77725d69eb4a 100644 --- a/Documentation/powerpc/ptrace.rst +++ b/Documentation/powerpc/ptrace.rst @@ -46,6 +46,7 @@ features will have bits indicating whether there is support for:: #define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x4 #define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x8 #define PPC_DEBUG_FEATURE_DATA_BP_DAWR 0x10 + #define PPC_DEBUG_FEATURE_DATA_BP_ARCH_31 0x20 2. PTRACE_SETHWDEBUG diff --git a/Documentation/powerpc/syscall64-abi.rst b/Documentation/powerpc/syscall64-abi.rst index 379817ca64d2..cf9b2857c72a 100644 --- a/Documentation/powerpc/syscall64-abi.rst +++ b/Documentation/powerpc/syscall64-abi.rst @@ -49,22 +49,22 @@ Register preservation rules Register preservation rules match the ELF ABI calling sequence with the following differences: ---- For the sc instruction, differences with the ELF ABI --- -=========== ============= ======================================== -r0 Volatile (System call number.) -r3 Volatile (Parameter 1, and return value.) -r4-r8 Volatile (Parameters 2-6.) -cr0 Volatile (cr0.SO is the return error condition.) -cr1, cr5-7 Nonvolatile -lr Nonvolatile -=========== ============= ======================================== - ---- For the scv 0 instruction, differences with the ELF ABI --- -=========== ============= ======================================== -r0 Volatile (System call number.) -r3 Volatile (Parameter 1, and return value.) -r4-r8 Volatile (Parameters 2-6.) -=========== ============= ======================================== ++------------------------------------------------------------------------+ +| For the sc instruction, differences with the ELF ABI | ++--------------+--------------+------------------------------------------+ +| r0 | Volatile | (System call number.) | +| rr3 | Volatile | (Parameter 1, and return value.) | +| rr4-r8 | Volatile | (Parameters 2-6.) | +| rcr0 | Volatile | (cr0.SO is the return error condition.) | +| rcr1, cr5-7 | Nonvolatile | | +| rlr | Nonvolatile | | ++--------------+--------------+------------------------------------------+ +| For the scv 0 instruction, differences with the ELF ABI | ++--------------+--------------+------------------------------------------+ +| r0 | Volatile | (System call number.) | +| r3 | Volatile | (Parameter 1, and return value.) | +| r4-r8 | Volatile | (Parameters 2-6.) | ++--------------+--------------+------------------------------------------+ All floating point and vector data registers as well as control and status registers are nonvolatile. diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst index 4ae1e0f600c1..e05fb1b8f8b6 100644 --- a/Documentation/process/2.Process.rst +++ b/Documentation/process/2.Process.rst @@ -405,7 +405,7 @@ be found at: http://vger.kernel.org/vger-lists.html There are lists hosted elsewhere, though; a number of them are at -lists.redhat.com. +redhat.com/mailman/listinfo. The core mailing list for kernel development is, of course, linux-kernel. This list is an intimidating place to be; volume can reach 500 messages per diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index ee741763a3fc..dac17711dc11 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -30,6 +30,7 @@ you probably needn't concern yourself with pcmciautils. Program Minimal version Command to check the version ====================== =============== ======================================== GNU C 4.9 gcc --version +Clang/LLVM (optional) 10.0.1 clang --version GNU make 3.81 make --version binutils 2.23 ld -v flex 2.5.35 flex --version @@ -68,6 +69,15 @@ GCC The gcc version requirements may vary depending on the type of CPU in your computer. +Clang/LLVM (optional) +--------------------- + +The latest formal release of clang and LLVM utils (according to +`releases.llvm.org <https://releases.llvm.org>`_) are supported for building +kernels. Older releases aren't guaranteed to work, and we may drop workarounds +from the kernel that were used to support older versions. Please see additional +docs on :ref:`Building Linux with Clang/LLVM <kbuild_llvm>`. + Make ---- @@ -331,6 +341,11 @@ gcc - <ftp://ftp.gnu.org/gnu/gcc/> +Clang/LLVM +---------- + +- :ref:`Getting LLVM <getting_llvm>`. + Make ---- diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst index 4a9aa4f0681e..9d83b8db8874 100644 --- a/Documentation/process/deprecated.rst +++ b/Documentation/process/deprecated.rst @@ -51,24 +51,6 @@ to make sure their systems do not continue running in the face of "unreachable" conditions. (For example, see commits like `this one <https://git.kernel.org/linus/d4689846881d160a4d12a514e991a740bcb5d65a>`_.) -uninitialized_var() -------------------- -For any compiler warnings about uninitialized variables, just add -an initializer. Using the uninitialized_var() macro (or similar -warning-silencing tricks) is dangerous as it papers over `real bugs -<https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/>`_ -(or can in the future), and suppresses unrelated compiler warnings -(e.g. "unused variable"). If the compiler thinks it is uninitialized, -either simply initialize the variable or make compiler changes. Keep in -mind that in most cases, if an initialization is obviously redundant, -the compiler's dead-store elimination pass will make sure there are no -needless variable writes. - -As Linus has said, this macro -`must <https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/>`_ -`be <https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/>`_ -`removed <https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/>`_. - open-coded arithmetic in allocator arguments -------------------------------------------- Dynamic size calculations (especially multiplication) should not be @@ -124,35 +106,43 @@ NUL or newline terminated. strcpy() -------- -strcpy() performs no bounds checking on the destination -buffer. This could result in linear overflows beyond the -end of the buffer, leading to all kinds of misbehaviors. While -`CONFIG_FORTIFY_SOURCE=y` and various compiler flags help reduce the -risk of using this function, there is no good reason to add new uses of -this function. The safe replacement is strscpy(). +strcpy() performs no bounds checking on the destination buffer. This +could result in linear overflows beyond the end of the buffer, leading to +all kinds of misbehaviors. While `CONFIG_FORTIFY_SOURCE=y` and various +compiler flags help reduce the risk of using this function, there is +no good reason to add new uses of this function. The safe replacement +is strscpy(), though care must be given to any cases where the return +value of strcpy() was used, since strscpy() does not return a pointer to +the destination, but rather a count of non-NUL bytes copied (or negative +errno when it truncates). strncpy() on NUL-terminated strings ----------------------------------- -Use of strncpy() does not guarantee that the destination buffer -will be NUL terminated. This can lead to various linear read overflows -and other misbehavior due to the missing termination. It also NUL-pads the -destination buffer if the source contents are shorter than the destination -buffer size, which may be a needless performance penalty for callers using -only NUL-terminated strings. The safe replacement is strscpy(). -(Users of strscpy() still needing NUL-padding should instead -use strscpy_pad().) - -If a caller is using non-NUL-terminated strings, strncpy()() can +Use of strncpy() does not guarantee that the destination buffer will +be NUL terminated. This can lead to various linear read overflows and +other misbehavior due to the missing termination. It also NUL-pads +the destination buffer if the source contents are shorter than the +destination buffer size, which may be a needless performance penalty +for callers using only NUL-terminated strings. The safe replacement is +strscpy(), though care must be given to any cases where the return value +of strncpy() was used, since strscpy() does not return a pointer to the +destination, but rather a count of non-NUL bytes copied (or negative +errno when it truncates). Any cases still needing NUL-padding should +instead use strscpy_pad(). + +If a caller is using non-NUL-terminated strings, strncpy() can still be used, but destinations should be marked with the `__nonstring <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_ attribute to avoid future compiler warnings. strlcpy() --------- -strlcpy() reads the entire source buffer first, possibly exceeding -the given limit of bytes to copy. This is inefficient and can lead to -linear read overflows if a source string is not NUL-terminated. The -safe replacement is strscpy(). +strlcpy() reads the entire source buffer first (since the return value +is meant to match that of strlen()). This read may exceed the destination +size limit. This is both inefficient and can lead to linear read overflows +if a source string is not NUL-terminated. The safe replacement is strscpy(), +though care must be given to any cases where the return value of strlcpy() +is used, since strscpy() will return negative errno values when it truncates. %p format specifier ------------------- @@ -322,7 +312,8 @@ to allocate for a structure containing an array of this kind as a member:: In the example above, we had to remember to calculate ``count - 1`` when using the struct_size() helper, otherwise we would have --unintentionally-- allocated memory for one too many ``items`` objects. The cleanest and least error-prone way -to implement this is through the use of a `flexible array member`:: +to implement this is through the use of a `flexible array member`, together with +struct_size() and flex_array_size() helpers:: struct something { size_t count; @@ -334,5 +325,4 @@ to implement this is through the use of a `flexible array member`:: instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL); instance->count = count; - size = sizeof(instance->items[0]) * instance->count; - memcpy(instance->items, source, size); + memcpy(instance->items, source, flex_array_size(instance, items, instance->count)); diff --git a/Documentation/process/email-clients.rst b/Documentation/process/email-clients.rst index c9e4ce2613c0..16586f6cc888 100644 --- a/Documentation/process/email-clients.rst +++ b/Documentation/process/email-clients.rst @@ -25,6 +25,11 @@ attachments, but then the attachments should have content-type it makes quoting portions of the patch more difficult in the patch review process. +It's also strongly recommended that you use plain text in your email body, +for patches and other emails alike. https://useplaintext.email may be useful +for information on how to configure your preferred email client, as well as +listing recommended email clients should you not already have a preference. + Email clients that are used for Linux kernel patches should send the patch text untouched. For example, they should not modify or delete tabs or spaces, even at the beginning or end of lines. diff --git a/Documentation/process/programming-language.rst b/Documentation/process/programming-language.rst index e5f5f065dc24..ec474a70a02f 100644 --- a/Documentation/process/programming-language.rst +++ b/Documentation/process/programming-language.rst @@ -6,14 +6,15 @@ Programming Language The kernel is written in the C programming language [c-language]_. More precisely, the kernel is typically compiled with ``gcc`` [gcc]_ under ``-std=gnu89`` [gcc-c-dialect-options]_: the GNU dialect of ISO C90 -(including some C99 features). +(including some C99 features). ``clang`` [clang]_ is also supported, see +docs on :ref:`Building Linux with Clang/LLVM <kbuild_llvm>`. This dialect contains many extensions to the language [gnu-extensions]_, and many of them are used within the kernel as a matter of course. -There is some support for compiling the kernel with ``clang`` [clang]_ -and ``icc`` [icc]_ for several of the architectures, although at the time -of writing it is not completed, requiring third-party patches. +There is some support for compiling the kernel with ``icc`` [icc]_ for several +of the architectures, although at the time of writing it is not completed, +requiring third-party patches. Attributes ---------- diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst index 3f8e9d5d95c2..1879f881c300 100644 --- a/Documentation/process/submit-checklist.rst +++ b/Documentation/process/submit-checklist.rst @@ -24,6 +24,10 @@ and elsewhere regarding submitting Linux kernel patches. c) Builds successfully when using ``O=builddir`` + d) Any Documentation/ changes build successfully without new warnings/errors. + Use ``make htmldocs`` or ``make pdfdocs`` to check the build and + fix any issues. + 3) Builds on multiple CPU architectures by using local cross-compile tools or some other build farm. @@ -49,8 +53,7 @@ and elsewhere regarding submitting Linux kernel patches. 9) Check cleanly with sparse. -10) Use ``make checkstack`` and ``make namespacecheck`` and fix any problems - that they find. +10) Use ``make checkstack`` and fix any problems that it finds. .. note:: diff --git a/Documentation/process/submitting-drivers.rst b/Documentation/process/submitting-drivers.rst index 74b35bfc6623..3861887e0ca5 100644 --- a/Documentation/process/submitting-drivers.rst +++ b/Documentation/process/submitting-drivers.rst @@ -60,10 +60,11 @@ What Criteria Determine Acceptance Licensing: The code must be released to us under the - GNU General Public License. We don't insist on any kind - of exclusive GPL licensing, and if you wish the driver - to be useful to other communities such as BSD you may well - wish to release under multiple licenses. + GNU General Public License. If you wish the driver to be + useful to other communities such as BSD you may release + under multiple licenses. If you choose to release under + licenses other than the GPL, you should include your + rationale for your license choices in your cover letter. See accepted licenses at include/linux/module.h Copyright: diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst index 5219bf3cddfc..83d9a82055a7 100644 --- a/Documentation/process/submitting-patches.rst +++ b/Documentation/process/submitting-patches.rst @@ -10,22 +10,18 @@ can greatly increase the chances of your change being accepted. This document contains a large number of suggestions in a relatively terse format. For detailed information on how the kernel development process -works, see :ref:`Documentation/process <development_process_main>`. -Also, read :ref:`Documentation/process/submit-checklist.rst <submitchecklist>` -for a list of items to check before -submitting code. If you are submitting a driver, also read -:ref:`Documentation/process/submitting-drivers.rst <submittingdrivers>`; -for device tree binding patches, read -Documentation/devicetree/bindings/submitting-patches.rst. - -Many of these steps describe the default behavior of the ``git`` version -control system; if you use ``git`` to prepare your patches, you'll find much -of the mechanical work done for you, though you'll still need to prepare -and document a sensible set of patches. In general, use of ``git`` will make -your life as a kernel developer easier. - -0) Obtain a current source tree -------------------------------- +works, see :doc:`development-process`. Also, read :doc:`submit-checklist` +for a list of items to check before submitting code. If you are submitting +a driver, also read :doc:`submitting-drivers`; for device tree binding patches, +read :doc:`submitting-patches`. + +This documentation assumes that you're using ``git`` to prepare your patches. +If you're unfamiliar with ``git``, you would be well-advised to learn how to +use it, it will make your life as a kernel developer and in general much +easier. + +Obtain a current source tree +---------------------------- If you do not have a repository with the current kernel source handy, use ``git`` to obtain one. You'll want to start with the mainline repository, @@ -39,68 +35,10 @@ patches prepared against those trees. See the **T:** entry for the subsystem in the MAINTAINERS file to find that tree, or simply ask the maintainer if the tree is not listed there. -It is still possible to download kernel releases via tarballs (as described -in the next section), but that is the hard way to do kernel development. - -1) ``diff -up`` ---------------- - -If you must generate your patches by hand, use ``diff -up`` or ``diff -uprN`` -to create patches. Git generates patches in this form by default; if -you're using ``git``, you can skip this section entirely. - -All changes to the Linux kernel occur in the form of patches, as -generated by :manpage:`diff(1)`. When creating your patch, make sure to -create it in "unified diff" format, as supplied by the ``-u`` argument -to :manpage:`diff(1)`. -Also, please use the ``-p`` argument which shows which C function each -change is in - that makes the resultant ``diff`` a lot easier to read. -Patches should be based in the root kernel source directory, -not in any lower subdirectory. - -To create a patch for a single file, it is often sufficient to do:: - - SRCTREE=linux - MYFILE=drivers/net/mydriver.c - - cd $SRCTREE - cp $MYFILE $MYFILE.orig - vi $MYFILE # make your change - cd .. - diff -up $SRCTREE/$MYFILE{.orig,} > /tmp/patch - -To create a patch for multiple files, you should unpack a "vanilla", -or unmodified kernel source tree, and generate a ``diff`` against your -own source tree. For example:: - - MYSRC=/devel/linux - - tar xvfz linux-3.19.tar.gz - mv linux-3.19 linux-3.19-vanilla - diff -uprN -X linux-3.19-vanilla/Documentation/dontdiff \ - linux-3.19-vanilla $MYSRC > /tmp/patch - -``dontdiff`` is a list of files which are generated by the kernel during -the build process, and should be ignored in any :manpage:`diff(1)`-generated -patch. - -Make sure your patch does not include any extra files which do not -belong in a patch submission. Make sure to review your patch -after- -generating it with :manpage:`diff(1)`, to ensure accuracy. - -If your changes produce a lot of deltas, you need to split them into -individual patches which modify things in logical stages; see -:ref:`split_changes`. This will facilitate review by other kernel developers, -very important if you want your patch accepted. - -If you're using ``git``, ``git rebase -i`` can help you with this process. If -you're not using ``git``, ``quilt`` <https://savannah.nongnu.org/projects/quilt> -is another popular alternative. - .. _describe_changes: -2) Describe your changes ------------------------- +Describe your changes +--------------------- Describe your problem. Whether your patch is a one-line bug fix or 5000 lines of a new feature, there must be an underlying problem that @@ -203,8 +141,8 @@ An example call:: .. _split_changes: -3) Separate your changes ------------------------- +Separate your changes +--------------------- Separate each **logical change** into a separate patch. @@ -236,8 +174,8 @@ then only post say 15 or so at a time and wait for review and integration. -4) Style-check your changes ---------------------------- +Style-check your changes +------------------------ Check your patch for basic style violations, details of which can be found in @@ -267,8 +205,8 @@ You should be able to justify all violations that remain in your patch. -5) Select the recipients for your patch ---------------------------------------- +Select the recipients for your patch +------------------------------------ You should always copy the appropriate subsystem maintainer(s) on any patch to code that they maintain; look through the MAINTAINERS file and the @@ -299,7 +237,8 @@ sending him e-mail. If you have a patch that fixes an exploitable security bug, send that patch to security@kernel.org. For severe bugs, a short embargo may be considered to allow distributors to get the patch out to users; in such cases, -obviously, the patch should not be sent to any public lists. +obviously, the patch should not be sent to any public lists. See also +:doc:`/admin-guide/security-bugs`. Patches that fix a severe bug in a released kernel should be directed toward the stable maintainers by putting a line like this:: @@ -342,15 +281,20 @@ Trivial patches must qualify for one of the following rules: -6) No MIME, no links, no compression, no attachments. Just plain text ----------------------------------------------------------------------- +No MIME, no links, no compression, no attachments. Just plain text +------------------------------------------------------------------- Linus and other kernel developers need to be able to read and comment on the changes you are submitting. It is important for a kernel developer to be able to "quote" your changes, using standard e-mail tools, so that they may comment on specific portions of your code. -For this reason, all patches should be submitted by e-mail "inline". +For this reason, all patches should be submitted by e-mail "inline". The +easiest way to do this is with ``git send-email``, which is strongly +recommended. An interactive tutorial for ``git send-email`` is available at +https://git-send-email.io. + +If you choose not to use ``git send-email``: .. warning:: @@ -366,27 +310,17 @@ decreasing the likelihood of your MIME-attached change being accepted. Exception: If your mailer is mangling patches then someone may ask you to re-send them using MIME. -See :ref:`Documentation/process/email-clients.rst <email_clients>` -for hints about configuring your e-mail client so that it sends your patches -untouched. - -7) E-mail size --------------- +See :doc:`/process/email-clients` for hints about configuring your e-mail +client so that it sends your patches untouched. -Large changes are not appropriate for mailing lists, and some -maintainers. If your patch, uncompressed, exceeds 300 kB in size, -it is preferred that you store your patch on an Internet-accessible -server, and provide instead a URL (link) pointing to your patch. But note -that if your patch exceeds 300 kB, it almost certainly needs to be broken up -anyway. - -8) Respond to review comments ------------------------------ +Respond to review comments +-------------------------- Your patch will almost certainly get comments from reviewers on ways in -which the patch can be improved. You must respond to those comments; -ignoring reviewers is a good way to get ignored in return. Review comments -or questions that do not lead to a code change should almost certainly +which the patch can be improved, in the form of a reply to your email. You must +respond to those comments; ignoring reviewers is a good way to get ignored in +return. You can simply reply to their emails to answer their comments. Review +comments or questions that do not lead to a code change should almost certainly bring about a comment or changelog entry so that the next reviewer better understands what is going on. @@ -395,9 +329,12 @@ for their time. Code review is a tiring and time-consuming process, and reviewers sometimes get grumpy. Even in that case, though, respond politely and address the problems they have pointed out. +See :doc:`email-clients` for recommendations on email +clients and mailing list etiquette. -9) Don't get discouraged - or impatient ---------------------------------------- + +Don't get discouraged - or impatient +------------------------------------ After you have submitted your change, be patient and wait. Reviewers are busy people and may not get to your patch right away. @@ -410,18 +347,19 @@ one week before resubmitting or pinging reviewers - possibly longer during busy times like merge windows. -10) Include PATCH in the subject --------------------------------- +Include PATCH in the subject +----------------------------- Due to high e-mail traffic to Linus, and to linux-kernel, it is common convention to prefix your subject line with [PATCH]. This lets Linus and other kernel developers more easily distinguish patches from other e-mail discussions. +``git send-email`` will do this for you automatically. -11) Sign your work - the Developer's Certificate of Origin ----------------------------------------------------------- +Sign your work - the Developer's Certificate of Origin +------------------------------------------------------ To improve tracking of who did what, especially with patches that can percolate to their final resting place in the kernel through several @@ -465,60 +403,15 @@ then you just add a line saying:: Signed-off-by: Random J Developer <random@developer.example.org> using your real name (sorry, no pseudonyms or anonymous contributions.) +This will be done for you automatically if you use ``git commit -s``. Some people also put extra tags at the end. They'll just be ignored for now, but you can do this to mark internal company procedures or just point out some special detail about the sign-off. -If you are a subsystem or branch maintainer, sometimes you need to slightly -modify patches you receive in order to merge them, because the code is not -exactly the same in your tree and the submitters'. If you stick strictly to -rule (c), you should ask the submitter to rediff, but this is a totally -counter-productive waste of time and energy. Rule (b) allows you to adjust -the code, but then it is very impolite to change one submitter's code and -make him endorse your bugs. To solve this problem, it is recommended that -you add a line between the last Signed-off-by header and yours, indicating -the nature of your changes. While there is nothing mandatory about this, it -seems like prepending the description with your mail and/or name, all -enclosed in square brackets, is noticeable enough to make it obvious that -you are responsible for last-minute changes. Example:: - - Signed-off-by: Random J Developer <random@developer.example.org> - [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h] - Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org> - -This practice is particularly helpful if you maintain a stable branch and -want at the same time to credit the author, track changes, merge the fix, -and protect the submitter from complaints. Note that under no circumstances -can you change the author's identity (the From header), as it is the one -which appears in the changelog. - -Special note to back-porters: It seems to be a common and useful practice -to insert an indication of the origin of a patch at the top of the commit -message (just after the subject line) to facilitate tracking. For instance, -here's what we see in a 3.x-stable release:: - - Date: Tue Oct 7 07:26:38 2014 -0400 - - libata: Un-break ATA blacklist - - commit 1c40279960bcd7d52dbdf1d466b20d24b99176c8 upstream. - -And here's what might appear in an older kernel once a patch is backported:: - - Date: Tue May 13 22:12:27 2008 +0200 - wireless, airo: waitbusy() won't delay - - [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a] - -Whatever the format, this information provides a valuable help to people -tracking your trees, and to people trying to troubleshoot bugs in your -tree. - - -12) When to use Acked-by:, Cc:, and Co-developed-by: -------------------------------------------------------- +When to use Acked-by:, Cc:, and Co-developed-by: +------------------------------------------------ The Signed-off-by: tag indicates that the signer was involved in the development of the patch, or that he/she was in the patch's delivery path. @@ -586,8 +479,8 @@ Example of a patch submitted by a Co-developed-by: author:: Signed-off-by: Submitting Co-Author <sub@coauthor.example.org> -13) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes: --------------------------------------------------------------------------- +Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes: +---------------------------------------------------------------------- The Reported-by tag gives credit to people who find bugs and report them and it hopefully inspires them to help us again in the future. Please note that if @@ -634,6 +527,13 @@ done on the patch. Reviewed-by: tags, when supplied by reviewers known to understand the subject area and to perform thorough reviews, will normally increase the likelihood of your patch getting into the kernel. +Both Tested-by and Reviewed-by tags, once received on mailing list from tester +or reviewer, should be added by author to the applicable patches when sending +next versions. However if the patch has changed substantially in following +version, these tags might not be applicable anymore and thus should be removed. +Usually removal of someone's Tested-by or Reviewed-by tags should be mentioned +in the patch changelog (after the '---' separator). + A Suggested-by: tag indicates that the patch idea is suggested by the person named and ensures credit to the person for the idea. Please note that this tag should not be added without the reporter's permission, especially if the @@ -650,8 +550,8 @@ for more details. .. _the_canonical_patch_format: -14) The canonical patch format ------------------------------- +The canonical patch format +-------------------------- This section describes how the patch itself should be formatted. Note that, if you have your patches stored in a ``git`` repository, proper patch @@ -773,8 +673,8 @@ references. .. _explicit_in_reply_to: -15) Explicit In-Reply-To headers --------------------------------- +Explicit In-Reply-To headers +---------------------------- It can be helpful to manually add In-Reply-To: headers to a patch (e.g., when using ``git send-email``) to associate the patch with @@ -787,8 +687,8 @@ helpful, you can use the https://lkml.kernel.org/ redirector (e.g., in the cover email text) to link to an earlier version of the patch series. -16) Providing base tree information ------------------------------------ +Providing base tree information +------------------------------- When other developers receive your patches and start the review process, it is often useful for them to know where in the tree history they @@ -838,61 +738,6 @@ either below the ``---`` line or at the very bottom of all other content, right before your email signature. -17) Sending ``git pull`` requests ---------------------------------- - -If you have a series of patches, it may be most convenient to have the -maintainer pull them directly into the subsystem repository with a -``git pull`` operation. Note, however, that pulling patches from a developer -requires a higher degree of trust than taking patches from a mailing list. -As a result, many subsystem maintainers are reluctant to take pull -requests, especially from new, unknown developers. If in doubt you can use -the pull request as the cover letter for a normal posting of the patch -series, giving the maintainer the option of using either. - -A pull request should have [GIT PULL] in the subject line. The -request itself should include the repository name and the branch of -interest on a single line; it should look something like:: - - Please pull from - - git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus - - to get these changes: - -A pull request should also include an overall message saying what will be -included in the request, a ``git shortlog`` listing of the patches -themselves, and a ``diffstat`` showing the overall effect of the patch series. -The easiest way to get all this information together is, of course, to let -``git`` do it for you with the ``git request-pull`` command. - -Some maintainers (including Linus) want to see pull requests from signed -commits; that increases their confidence that the request actually came -from you. Linus, in particular, will not pull from public hosting sites -like GitHub in the absence of a signed tag. - -The first step toward creating such tags is to make a GNUPG key and get it -signed by one or more core kernel developers. This step can be hard for -new developers, but there is no way around it. Attending conferences can -be a good way to find developers who can sign your key. - -Once you have prepared a patch series in ``git`` that you wish to have somebody -pull, create a signed tag with ``git tag -s``. This will create a new tag -identifying the last commit in the series and containing a signature -created with your private key. You will also have the opportunity to add a -changelog-style message to the tag; this is an ideal place to describe the -effects of the pull request as a whole. - -If the tree the maintainer will be pulling from is not the repository you -are working from, don't forget to push the signed tag explicitly to the -public tree. - -When generating your pull request, use the signed tag as the target. A -command like this will do the trick:: - - git request-pull master git://my.public.tree/linux.git my-signed-tag - - References ---------- diff --git a/Documentation/scheduler/sched-capacity.rst b/Documentation/scheduler/sched-capacity.rst index 00bf0d011e2a..9b7cbe43b2d1 100644 --- a/Documentation/scheduler/sched-capacity.rst +++ b/Documentation/scheduler/sched-capacity.rst @@ -365,7 +365,7 @@ giving it a high uclamp.min value. .. note:: Wakeup CPU selection in CFS can be eclipsed by Energy Aware Scheduling - (EAS), which is described in Documentation/scheduling/sched-energy.rst. + (EAS), which is described in Documentation/scheduler/sched-energy.rst. 5.1.3 Load balancing ~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/scheduler/sched-energy.rst b/Documentation/scheduler/sched-energy.rst index 78f850778982..001e09c95e1d 100644 --- a/Documentation/scheduler/sched-energy.rst +++ b/Documentation/scheduler/sched-energy.rst @@ -331,7 +331,7 @@ asymmetric CPU topologies for now. This requirement is checked at run-time by looking for the presence of the SD_ASYM_CPUCAPACITY flag when the scheduling domains are built. -See Documentation/sched/sched-capacity.rst for requirements to be met for this +See Documentation/scheduler/sched-capacity.rst for requirements to be met for this flag to be set in the sched_domain hierarchy. Please note that EAS is not fundamentally incompatible with SMP, but no diff --git a/Documentation/scsi/LICENSE.qla2xxx b/Documentation/scsi/LICENSE.qla2xxx deleted file mode 100644 index 52f0b4359234..000000000000 --- a/Documentation/scsi/LICENSE.qla2xxx +++ /dev/null @@ -1,290 +0,0 @@ -Copyright (c) 2003-2014 QLogic Corporation -QLogic Linux FC-FCoE Driver - -This program includes a device driver for Linux 3.x. -You may modify and redistribute the device driver code under the -GNU General Public License (a copy of which is attached hereto as -Exhibit A) published by the Free Software Foundation (version 2). - - - -EXHIBIT A - - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Lesser General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. diff --git a/Documentation/scsi/LICENSE.qla4xxx b/Documentation/scsi/LICENSE.qla4xxx deleted file mode 100644 index fcc27ad27d74..000000000000 --- a/Documentation/scsi/LICENSE.qla4xxx +++ /dev/null @@ -1,289 +0,0 @@ -Copyright (c) 2003-2013 QLogic Corporation -QLogic Linux iSCSI Driver - -This program includes a device driver for Linux 3.x. -You may modify and redistribute the device driver code under the -GNU General Public License (a copy of which is attached hereto as -Exhibit A) published by the Free Software Foundation (version 2). - - -EXHIBIT A - - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Lesser General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. diff --git a/Documentation/scsi/scsi_mid_low_api.rst b/Documentation/scsi/scsi_mid_low_api.rst index 5358bc10689e..5bc17d012b25 100644 --- a/Documentation/scsi/scsi_mid_low_api.rst +++ b/Documentation/scsi/scsi_mid_low_api.rst @@ -271,12 +271,6 @@ Conventions First, Linus Torvalds's thoughts on C coding style can be found in the Documentation/process/coding-style.rst file. -Next, there is a movement to "outlaw" typedefs introducing synonyms for -struct tags. Both can be still found in the SCSI subsystem, but -the typedefs have been moved to a single file, scsi_typedefs.h to -make their future removal easier, for example: -"typedef struct scsi_cmnd Scsi_Cmnd;" - Also, most C99 enhancements are encouraged to the extent they are supported by the relevant gcc compilers. So C99 style structure and array initializers are encouraged where appropriate. Don't go too far, diff --git a/Documentation/scsi/smartpqi.rst b/Documentation/scsi/smartpqi.rst index a7de27352c6f..e574a1ccf4ac 100644 --- a/Documentation/scsi/smartpqi.rst +++ b/Documentation/scsi/smartpqi.rst @@ -1,12 +1,12 @@ .. SPDX-License-Identifier: GPL-2.0 -===================================== -SMARTPQI - Microsemi Smart PQI Driver -===================================== +============================================== +SMARTPQI - Microchip Smart Storage SCSI driver +============================================== -This file describes the smartpqi SCSI driver for Microsemi -(http://www.microsemi.com) PQI controllers. The smartpqi driver -is the next generation SCSI driver for Microsemi Corp. The smartpqi +This file describes the smartpqi SCSI driver for Microchip +(http://www.microchip.com) PQI controllers. The smartpqi driver +is the next generation SCSI driver for Microchip Corp. The smartpqi driver is the first SCSI driver to implement the PQI queuing model. The smartpqi driver will replace the aacraid driver for Adaptec Series 9 @@ -14,7 +14,7 @@ controllers. Customers running an older kernel (Pre-4.9) using an Adaptec Series 9 controller will have to configure the smartpqi driver or their volumes will not be added to the OS. -For Microsemi smartpqi controller support, enable the smartpqi driver +For Microchip smartpqi controller support, enable the smartpqi driver when configuring the kernel. For more information on the PQI Queuing Interface, please see: diff --git a/Documentation/security/credentials.rst b/Documentation/security/credentials.rst index d9387209d143..357328d566c8 100644 --- a/Documentation/security/credentials.rst +++ b/Documentation/security/credentials.rst @@ -323,7 +323,6 @@ credentials (the value is simply returned in each case):: uid_t current_fsuid(void) Current's file access UID gid_t current_fsgid(void) Current's file access GID kernel_cap_t current_cap(void) Current's effective capabilities - void *current_security(void) Current's LSM security pointer struct user_struct *current_user(void) Current's user account There are also convenience wrappers for retrieving specific associated pairs of diff --git a/Documentation/security/keys/trusted-encrypted.rst b/Documentation/security/keys/trusted-encrypted.rst index 9483a7425ad5..1da879a68640 100644 --- a/Documentation/security/keys/trusted-encrypted.rst +++ b/Documentation/security/keys/trusted-encrypted.rst @@ -39,10 +39,9 @@ With the IBM TSS 2 stack:: Or with the Intel TSS 2 stack:: - #> tpm2_createprimary --hierarchy o -G rsa2048 -o key.ctxt + #> tpm2_createprimary --hierarchy o -G rsa2048 -c key.ctxt [...] - handle: 0x800000FF - #> tpm2_evictcontrol -c key.ctxt -p 0x81000001 + #> tpm2_evictcontrol -c key.ctxt 0x81000001 persistentHandle: 0x81000001 Usage:: diff --git a/Documentation/sh/booting.rst b/Documentation/sh/booting.rst new file mode 100644 index 000000000000..d851c49a01bf --- /dev/null +++ b/Documentation/sh/booting.rst @@ -0,0 +1,12 @@ +.. SPDX-License-Identifier: GPL-2.0 + +DeviceTree Booting +------------------ + + Device-tree compatible SH bootloaders are expected to provide the physical + address of the device tree blob in r4. Since legacy bootloaders did not + guarantee any particular initial register state, kernels built to + inter-operate with old bootloaders must either use a builtin DTB or + select a legacy board option (something other than CONFIG_SH_DEVICE_TREE) + that does not use device tree. Support for the latter is being phased out + in favor of device tree. diff --git a/Documentation/sh/index.rst b/Documentation/sh/index.rst index b5933fd399f3..7b9a79a28167 100644 --- a/Documentation/sh/index.rst +++ b/Documentation/sh/index.rst @@ -7,6 +7,7 @@ SuperH Interfaces Guide .. toctree:: :maxdepth: 1 + booting new-machine register-banks diff --git a/Documentation/sound/cards/audigy-mixer.rst b/Documentation/sound/cards/audigy-mixer.rst index 998f76e19cdd..f3f4640ee2af 100644 --- a/Documentation/sound/cards/audigy-mixer.rst +++ b/Documentation/sound/cards/audigy-mixer.rst @@ -332,7 +332,7 @@ WO 9901953 (A1) US Patents (https://www.uspto.gov/) ----------------------------------- +----------------------------------- US 5925841 Digital Sampling Instrument employing cache memory (Jul. 20, 1999) diff --git a/Documentation/sound/cards/sb-live-mixer.rst b/Documentation/sound/cards/sb-live-mixer.rst index eccb0f0ffd0f..2ce41d3822d8 100644 --- a/Documentation/sound/cards/sb-live-mixer.rst +++ b/Documentation/sound/cards/sb-live-mixer.rst @@ -337,7 +337,7 @@ WO 9901953 (A1) US Patents (https://www.uspto.gov/) ----------------------------------- +----------------------------------- US 5925841 Digital Sampling Instrument employing cache memory (Jul. 20, 1999) diff --git a/Documentation/sound/designs/timestamping.rst b/Documentation/sound/designs/timestamping.rst index 2b0fff503415..7c7ecf5dbc4b 100644 --- a/Documentation/sound/designs/timestamping.rst +++ b/Documentation/sound/designs/timestamping.rst @@ -143,7 +143,7 @@ timestamp shows when the information is put together by the driver before returning from the ``STATUS`` and ``STATUS_EXT`` ioctl. in most cases this driver_timestamp will be identical to the regular system tstamp. -Examples of typestamping with HDaudio: +Examples of timestamping with HDAudio: 1. DMA timestamp, no compensation for DMA+analog delay :: diff --git a/Documentation/sound/designs/tracepoints.rst b/Documentation/sound/designs/tracepoints.rst index 78bc5572f829..b0a7e3010187 100644 --- a/Documentation/sound/designs/tracepoints.rst +++ b/Documentation/sound/designs/tracepoints.rst @@ -34,20 +34,20 @@ substream. In this procedure, PCM hardware parameters are decided by interaction between applications and ALSA PCM core. Once decided, runtime of the PCM substream keeps the parameters. -The parameters are described in :c:type:`struct snd_pcm_hw_params`. This +The parameters are described in struct snd_pcm_hw_params. This structure includes several types of parameters. Applications set preferable value to these parameters, then execute ioctl(2) with SNDRV_PCM_IOCTL_HW_REFINE or SNDRV_PCM_IOCTL_HW_PARAMS. The former is used just for refining available set of parameters. The latter is used for an actual decision of the parameters. -The :c:type:`struct snd_pcm_hw_params` structure has below members: +The struct snd_pcm_hw_params structure has below members: ``flags`` Configurable. ALSA PCM core and some drivers handle this flag to select convenient parameters or change their behaviour. ``masks`` Configurable. This type of parameter is described in - :c:type:`struct snd_mask` and represent mask values. As of PCM protocol + struct snd_mask and represent mask values. As of PCM protocol v2.0.13, three types are defined. - SNDRV_PCM_HW_PARAM_ACCESS @@ -55,7 +55,7 @@ The :c:type:`struct snd_pcm_hw_params` structure has below members: - SNDRV_PCM_HW_PARAM_SUBFORMAT ``intervals`` Configurable. This type of parameter is described in - :c:type:`struct snd_interval` and represent values with a range. As of + struct snd_interval and represent values with a range. As of PCM protocol v2.0.13, twelve types are defined. - SNDRV_PCM_HW_PARAM_SAMPLE_BITS @@ -78,7 +78,7 @@ The :c:type:`struct snd_pcm_hw_params` structure has below members: are going to be changed. ``cmask`` Read-only. After returning from ioctl(2), buffer in user space for - :c:type:`struct snd_pcm_hw_params` includes result of each operation. + struct snd_pcm_hw_params includes result of each operation. This mask represents which mask/interval parameter is actually changed. ``info`` Read-only. This represents hardware/driver capabilities as bit flags @@ -110,10 +110,10 @@ The :c:type:`struct snd_pcm_hw_params` structure has below members: value to this parameter but some drivers intentionally set zero with a care of hardware design or data transmission protocol. -ALSA PCM core handles buffer of :c:type:`struct snd_pcm_hw_params` when +ALSA PCM core handles buffer of struct snd_pcm_hw_params when applications execute ioctl(2) with SNDRV_PCM_HW_REFINE or SNDRV_PCM_HW_PARAMS. Parameters in the buffer are changed according to -:c:type:`struct snd_pcm_hardware` and rules of constraints in the runtime. The +struct snd_pcm_hardware and rules of constraints in the runtime. The structure describes capabilities of handled hardware. The rules describes dependencies on which a parameter is decided according to several parameters. A rule has a callback function, and drivers can register arbitrary functions @@ -121,17 +121,17 @@ to compute the target parameter. ALSA PCM core registers some rules to the runtime as a default. Each driver can join in the interaction as long as it prepared for two stuffs -in a callback of :c:type:`struct snd_pcm_ops.open`. +in a callback of struct snd_pcm_ops.open. 1. In the callback, drivers are expected to change a member of - :c:type:`struct snd_pcm_hardware` type in the runtime, according to + struct snd_pcm_hardware type in the runtime, according to capacities of corresponding hardware. 2. In the same callback, drivers are also expected to register additional rules of constraints into the runtime when several parameters have dependencies due to hardware design. The driver can refers to result of the interaction in a callback of -:c:type:`struct snd_pcm_ops.hw_params`, however it should not change the +struct snd_pcm_ops.hw_params, however it should not change the content. Tracepoints in this category are designed to trace changes of the @@ -163,7 +163,7 @@ fields are different according to type of the parameter. For parameters of mask type, the fields represent hexadecimal dump of content of the parameter. For parameters of interval type, the fields represent values of each member of ``empty``, ``integer``, ``openmin``, ``min``, ``max``, ``openmax`` in -:c:type:`struct snd_interval` in this order. +struct snd_interval in this order. Tracepoints in drivers ====================== diff --git a/Documentation/sound/kernel-api/alsa-driver-api.rst b/Documentation/sound/kernel-api/alsa-driver-api.rst index c8cc651eccf7..d24c64df7069 100644 --- a/Documentation/sound/kernel-api/alsa-driver-api.rst +++ b/Documentation/sound/kernel-api/alsa-driver-api.rst @@ -132,3 +132,4 @@ ISA DMA Helpers Other Helper Macros ------------------- .. kernel-doc:: include/sound/core.h +.. kernel-doc:: sound/sound_core.c diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst index aa9d5ab183d2..73bbd59afc33 100644 --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst @@ -194,7 +194,7 @@ The minimum flow for PCI soundcards is as follows: - create ``remove`` callback. -- create a :c:type:`struct pci_driver <pci_driver>` structure +- create a struct pci_driver structure containing the three pointers above. - create an ``init`` function just calling the @@ -487,7 +487,7 @@ The destructor, remove callback, simply releases the card instance. Then the ALSA middle layer will release all the attached components automatically. -It would be typically just :c:func:`calling snd_card_free()`: +It would be typically just calling :c:func:`snd_card_free()`: :: @@ -560,16 +560,15 @@ return the card instance. The extra_size argument is used to allocate card->private_data for the chip-specific data. Note that these data are allocated by :c:func:`snd_card_new()`. -The first argument, the pointer of struct :c:type:`struct device -<device>`, specifies the parent device. For PCI devices, typically -``&pci->`` is passed there. +The first argument, the pointer of struct device, specifies the parent +device. For PCI devices, typically ``&pci->`` is passed there. Components ---------- After the card is created, you can attach the components (devices) to the card instance. In an ALSA driver, a component is represented as a -:c:type:`struct snd_device <snd_device>` object. A component +struct snd_device object. A component can be a PCM instance, a control interface, a raw MIDI interface, etc. Each such instance has one component entry. @@ -628,7 +627,7 @@ argument of :c:func:`snd_card_new()`, i.e. err = snd_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE, sizeof(struct mychip), &card); -:c:type:`struct mychip <mychip>` is the type of the chip record. +struct mychip is the type of the chip record. In return, the allocated record can be accessed as @@ -890,7 +889,7 @@ functions. These resources must be released in the destructor function (see below). Now assume that the PCI device has an I/O port with 8 bytes and an -interrupt. Then :c:type:`struct mychip <mychip>` will have the +interrupt. Then struct mychip will have the following fields: :: @@ -1094,7 +1093,7 @@ PCI Entries ----------- So far, so good. Let's finish the missing PCI stuff. At first, we need a -:c:type:`struct pci_device_id <pci_device_id>` table for +struct pci_device_id table for this chipset. It's a table of PCI vendor/device ID number, and some masks. @@ -1110,19 +1109,17 @@ For example, }; MODULE_DEVICE_TABLE(pci, snd_mychip_ids); -The first and second fields of the :c:type:`struct pci_device_id -<pci_device_id>` structure are the vendor and device IDs. If you -have no reason to filter the matching devices, you can leave the -remaining fields as above. The last field of the :c:type:`struct -pci_device_id <pci_device_id>` struct contains private data -for this entry. You can specify any value here, for example, to define -specific operations for supported device IDs. Such an example is found -in the intel8x0 driver. +The first and second fields of the struct pci_device_id are the vendor +and device IDs. If you have no reason to filter the matching devices, you can +leave the remaining fields as above. The last field of the +struct pci_device_id contains private data for this entry. You can specify +any value here, for example, to define specific operations for supported +device IDs. Such an example is found in the intel8x0 driver. The last entry of this list is the terminator. You must specify this all-zero entry. -Then, prepare the :c:type:`struct pci_driver <pci_driver>` +Then, prepare the struct pci_driver record: :: @@ -1439,8 +1436,8 @@ corresponding argument. If a chip supports multiple playbacks or captures, you can specify more numbers, but they must be handled properly in open/close, etc. callbacks. When you need to know which substream you are referring to, -then it can be obtained from :c:type:`struct snd_pcm_substream -<snd_pcm_substream>` data passed to each callback as follows: +then it can be obtained from struct snd_pcm_substream data passed to each +callback as follows: :: @@ -1639,10 +1636,9 @@ In the sections below, important records are explained. Hardware Description ~~~~~~~~~~~~~~~~~~~~ -The hardware descriptor (:c:type:`struct snd_pcm_hardware -<snd_pcm_hardware>`) contains the definitions of the fundamental -hardware configuration. Above all, you'll need to define this in the -`PCM open callback`_. Note that the runtime instance holds the copy of +The hardware descriptor (struct snd_pcm_hardware) contains the definitions of +the fundamental hardware configuration. Above all, you'll need to define this +in the `PCM open callback`_. Note that the runtime instance holds the copy of the descriptor, not the pointer to the existing descriptor. That is, in the open callback, you can modify the copied descriptor (``runtime->hw``) as you need. For example, if the maximum number of @@ -1800,14 +1796,13 @@ Running Status ~~~~~~~~~~~~~~ The running status can be referred via ``runtime->status``. This is -the pointer to the :c:type:`struct snd_pcm_mmap_status -<snd_pcm_mmap_status>` record. For example, you can get the current +the pointer to the struct snd_pcm_mmap_status record. +For example, you can get the current DMA hardware pointer via ``runtime->status->hw_ptr``. The DMA application pointer can be referred via ``runtime->control``, -which points to the :c:type:`struct snd_pcm_mmap_control -<snd_pcm_mmap_control>` record. However, accessing directly to -this value is not recommended. +which points to the struct snd_pcm_mmap_control record. +However, accessing directly to this value is not recommended. Private Data ~~~~~~~~~~~~ @@ -1843,8 +1838,8 @@ error number such as ``-EINVAL``. To choose an appropriate error number, it is advised to check what value other parts of the kernel return when the same kind of request fails. -The callback function takes at least the argument with :c:type:`struct -snd_pcm_substream <snd_pcm_substream>` pointer. To retrieve the chip +The callback function takes at least the argument with +struct snd_pcm_substream pointer. To retrieve the chip record from the given substream instance, you can use the following macro. @@ -2313,10 +2308,10 @@ non-atomic contexts. For example, the function :c:func:`snd_pcm_period_elapsed()` is called typically from the interrupt handler. But, if you set up the driver to use a threaded interrupt handler, this call can be in non-atomic context, too. In such -a case, you can set ``nonatomic`` filed of :c:type:`struct snd_pcm -<snd_pcm>` object after creating it. When this flag is set, mutex -and rwsem are used internally in the PCM core instead of spin and -rwlocks, so that you can call all PCM functions safely in a non-atomic +a case, you can set ``nonatomic`` filed of struct snd_pcm object +after creating it. When this flag is set, mutex and rwsem are used internally +in the PCM core instead of spin and rwlocks, so that you can call all PCM +functions safely in a non-atomic context. Constraints @@ -2357,8 +2352,7 @@ There are many different constraints. Look at ``sound/pcm.h`` for a complete list. You can even define your own constraint rules. For example, let's suppose my_chip can manage a substream of 1 channel if and only if the format is ``S16_LE``, otherwise it supports any format -specified in the :c:type:`struct snd_pcm_hardware -<snd_pcm_hardware>` structure (or in any other +specified in struct snd_pcm_hardware> (or in any other constraint_list). You can build a rule like this: :: @@ -2467,7 +2461,7 @@ Definition of Controls To create a new control, you need to define the following three callbacks: ``info``, ``get`` and ``put``. Then, define a -:c:type:`struct snd_kcontrol_new <snd_kcontrol_new>` record, such as: +struct snd_kcontrol_new record, such as: :: @@ -2602,8 +2596,8 @@ info callback ~~~~~~~~~~~~~ The ``info`` callback is used to get detailed information on this -control. This must store the values of the given :c:type:`struct -snd_ctl_elem_info <snd_ctl_elem_info>` object. For example, +control. This must store the values of the given +struct snd_ctl_elem_info object. For example, for a boolean control with a single element: :: @@ -2774,13 +2768,11 @@ In the simplest way, you can do like this: if (err < 0) return err; -where ``my_control`` is the :c:type:`struct snd_kcontrol_new -<snd_kcontrol_new>` object defined above, and chip is the object -pointer to be passed to kcontrol->private_data which can be referred -to in callbacks. +where ``my_control`` is the struct snd_kcontrol_new object defined above, +and chip is the object pointer to be passed to kcontrol->private_data which +can be referred to in callbacks. -:c:func:`snd_ctl_new1()` allocates a new :c:type:`struct -snd_kcontrol <snd_kcontrol>` instance, and +:c:func:`snd_ctl_new1()` allocates a new struct snd_kcontrol instance, and :c:func:`snd_ctl_add()` assigns the given control component to the card. @@ -2797,10 +2789,9 @@ can call :c:func:`snd_ctl_notify()`. For example, This function takes the card pointer, the event-mask, and the control id pointer for the notification. The event-mask specifies the types of notification, for example, in the above example, the change of control -values is notified. The id pointer is the pointer of :c:type:`struct -snd_ctl_elem_id <snd_ctl_elem_id>` to be notified. You can -find some examples in ``es1938.c`` or ``es1968.c`` for hardware volume -interrupts. +values is notified. The id pointer is the pointer of struct snd_ctl_elem_id +to be notified. You can find some examples in ``es1938.c`` or ``es1968.c`` +for hardware volume interrupts. Metadata -------- @@ -2915,9 +2906,8 @@ with an ``ac97_bus_ops_t`` record with callback functions. The bus record is shared among all belonging ac97 instances. -And then call :c:func:`snd_ac97_mixer()` with an :c:type:`struct -snd_ac97_template <snd_ac97_template>` record together with -the bus pointer created above. +And then call :c:func:`snd_ac97_mixer()` with an struct snd_ac97_template +record together with the bus pointer created above. :: @@ -3118,11 +3108,10 @@ devices on the card, set ``MPU401_INFO_IRQ_HOOK`` (see Usually, the port address corresponds to the command port and port + 1 corresponds to the data port. If not, you may change the ``cport`` -field of :c:type:`struct snd_mpu401 <snd_mpu401>` manually afterward. -However, :c:type:`struct snd_mpu401 <snd_mpu401>` pointer is +field of struct snd_mpu401 manually afterward. +However, struct snd_mpu401 pointer is not returned explicitly by :c:func:`snd_mpu401_uart_new()`. You -need to cast ``rmidi->private_data`` to :c:type:`struct snd_mpu401 -<snd_mpu401>` explicitly, +need to cast ``rmidi->private_data`` to struct snd_mpu401 explicitly, :: @@ -3326,8 +3315,7 @@ data and removes them from the buffer at once: } If you know beforehand how many bytes you can accept, you can use a -buffer size greater than one with the -:c:func:`snd_rawmidi_transmit\*()` functions. +buffer size greater than one with the ``snd_rawmidi_transmit*()`` functions. The ``trigger`` callback must not sleep. If the hardware FIFO is full before the substream buffer has been emptied, you have to continue @@ -3772,7 +3760,7 @@ For creating the SG-buffer handler, call :c:func:`snd_pcm_set_managed_buffer_all()` with ``SNDRV_DMA_TYPE_DEV_SG`` in the PCM constructor like other PCI pre-allocator. You need to pass ``&pci->dev``, where pci is -the :c:type:`struct pci_dev <pci_dev>` pointer of the chip as +the struct pci_dev pointer of the chip as well. :: @@ -3927,7 +3915,7 @@ the maximum size of the proc file access. The read/write callbacks of raw mode are more direct than the text mode. You need to use a low-level I/O functions such as -:c:func:`copy_from/to_user()` to transfer the data. +:c:func:`copy_from_user()` and :c:func:`copy_to_user()` to transfer the data. :: diff --git a/Documentation/sphinx/automarkup.py b/Documentation/sphinx/automarkup.py index b18236370742..409dbc4100de 100644 --- a/Documentation/sphinx/automarkup.py +++ b/Documentation/sphinx/automarkup.py @@ -13,6 +13,7 @@ if sphinx.version_info[0] < 2 or \ else: from sphinx.errors import NoUri import re +from itertools import chain # # Regex nastiness. Of course. @@ -21,7 +22,34 @@ import re # :c:func: block (i.e. ":c:func:`mmap()`s" flakes out), so the last # bit tries to restrict matches to things that won't create trouble. # -RE_function = re.compile(r'([\w_][\w\d_]+\(\))') +RE_function = re.compile(r'\b(([a-zA-Z_]\w+)\(\))', flags=re.ASCII) + +# +# Sphinx 2 uses the same :c:type role for struct, union, enum and typedef +# +RE_generic_type = re.compile(r'\b(struct|union|enum|typedef)\s+([a-zA-Z_]\w+)', + flags=re.ASCII) + +# +# Sphinx 3 uses a different C role for each one of struct, union, enum and +# typedef +# +RE_struct = re.compile(r'\b(struct)\s+([a-zA-Z_]\w+)', flags=re.ASCII) +RE_union = re.compile(r'\b(union)\s+([a-zA-Z_]\w+)', flags=re.ASCII) +RE_enum = re.compile(r'\b(enum)\s+([a-zA-Z_]\w+)', flags=re.ASCII) +RE_typedef = re.compile(r'\b(typedef)\s+([a-zA-Z_]\w+)', flags=re.ASCII) + +# +# Detects a reference to a documentation page of the form Documentation/... with +# an optional extension +# +RE_doc = re.compile(r'\bDocumentation(/[\w\-_/]+)(\.\w+)*') + +# +# Reserved C words that we should skip when cross-referencing +# +Skipnames = [ 'for', 'if', 'register', 'sizeof', 'struct', 'unsigned' ] + # # Many places in the docs refer to common system calls. It is @@ -34,32 +62,73 @@ Skipfuncs = [ 'open', 'close', 'read', 'write', 'fcntl', 'mmap', 'select', 'poll', 'fork', 'execve', 'clone', 'ioctl', 'socket' ] -# -# Find all occurrences of function() and try to replace them with -# appropriate cross references. -# -def markup_funcs(docname, app, node): - cdom = app.env.domains['c'] +def markup_refs(docname, app, node): t = node.astext() done = 0 repl = [ ] - for m in RE_function.finditer(t): + # + # Associate each regex with the function that will markup its matches + # + markup_func_sphinx2 = {RE_doc: markup_doc_ref, + RE_function: markup_c_ref, + RE_generic_type: markup_c_ref} + + markup_func_sphinx3 = {RE_doc: markup_doc_ref, + RE_function: markup_func_ref_sphinx3, + RE_struct: markup_c_ref, + RE_union: markup_c_ref, + RE_enum: markup_c_ref, + RE_typedef: markup_c_ref} + + if sphinx.version_info[0] >= 3: + markup_func = markup_func_sphinx3 + else: + markup_func = markup_func_sphinx2 + + match_iterators = [regex.finditer(t) for regex in markup_func] + # + # Sort all references by the starting position in text + # + sorted_matches = sorted(chain(*match_iterators), key=lambda m: m.start()) + for m in sorted_matches: # - # Include any text prior to function() as a normal text node. + # Include any text prior to match as a normal text node. # if m.start() > done: repl.append(nodes.Text(t[done:m.start()])) + # - # Go through the dance of getting an xref out of the C domain + # Call the function associated with the regex that matched this text and + # append its return to the text # - target = m.group(1)[:-2] - target_text = nodes.Text(target + '()') - xref = None - if target not in Skipfuncs: - lit_text = nodes.literal(classes=['xref', 'c', 'c-func']) + repl.append(markup_func[m.re](docname, app, m)) + + done = m.end() + if done < len(t): + repl.append(nodes.Text(t[done:])) + return repl + +# +# In sphinx3 we can cross-reference to C macro and function, each one with its +# own C role, but both match the same regex, so we try both. +# +def markup_func_ref_sphinx3(docname, app, match): + class_str = ['c-func', 'c-macro'] + reftype_str = ['function', 'macro'] + + cdom = app.env.domains['c'] + # + # Go through the dance of getting an xref out of the C domain + # + target = match.group(2) + target_text = nodes.Text(match.group(0)) + xref = None + if not (target in Skipfuncs or target in Skipnames): + for class_s, reftype_s in zip(class_str, reftype_str): + lit_text = nodes.literal(classes=['xref', 'c', class_s]) lit_text += target_text pxref = addnodes.pending_xref('', refdomain = 'c', - reftype = 'function', + reftype = reftype_s, reftarget = target, modname = None, classname = None) # @@ -68,21 +137,99 @@ def markup_funcs(docname, app, node): # try: xref = cdom.resolve_xref(app.env, docname, app.builder, - 'function', target, pxref, lit_text) + reftype_s, target, pxref, + lit_text) except NoUri: xref = None + + if xref: + return xref + + return target_text + +def markup_c_ref(docname, app, match): + class_str = {# Sphinx 2 only + RE_function: 'c-func', + RE_generic_type: 'c-type', + # Sphinx 3+ only + RE_struct: 'c-struct', + RE_union: 'c-union', + RE_enum: 'c-enum', + RE_typedef: 'c-type', + } + reftype_str = {# Sphinx 2 only + RE_function: 'function', + RE_generic_type: 'type', + # Sphinx 3+ only + RE_struct: 'struct', + RE_union: 'union', + RE_enum: 'enum', + RE_typedef: 'type', + } + + cdom = app.env.domains['c'] + # + # Go through the dance of getting an xref out of the C domain + # + target = match.group(2) + target_text = nodes.Text(match.group(0)) + xref = None + if not ((match.re == RE_function and target in Skipfuncs) + or (target in Skipnames)): + lit_text = nodes.literal(classes=['xref', 'c', class_str[match.re]]) + lit_text += target_text + pxref = addnodes.pending_xref('', refdomain = 'c', + reftype = reftype_str[match.re], + reftarget = target, modname = None, + classname = None) # - # Toss the xref into the list if we got it; otherwise just put - # the function text. + # XXX The Latex builder will throw NoUri exceptions here, + # work around that by ignoring them. # - if xref: - repl.append(xref) - else: - repl.append(target_text) - done = m.end() - if done < len(t): - repl.append(nodes.Text(t[done:])) - return repl + try: + xref = cdom.resolve_xref(app.env, docname, app.builder, + reftype_str[match.re], target, pxref, + lit_text) + except NoUri: + xref = None + # + # Return the xref if we got it; otherwise just return the plain text. + # + if xref: + return xref + else: + return target_text + +# +# Try to replace a documentation reference of the form Documentation/... with a +# cross reference to that page +# +def markup_doc_ref(docname, app, match): + stddom = app.env.domains['std'] + # + # Go through the dance of getting an xref out of the std domain + # + target = match.group(1) + xref = None + pxref = addnodes.pending_xref('', refdomain = 'std', reftype = 'doc', + reftarget = target, modname = None, + classname = None, refexplicit = False) + # + # XXX The Latex builder will throw NoUri exceptions here, + # work around that by ignoring them. + # + try: + xref = stddom.resolve_xref(app.env, docname, app.builder, 'doc', + target, pxref, None) + except NoUri: + xref = None + # + # Return the xref if we got it; otherwise just return the plain text. + # + if xref: + return xref + else: + return nodes.Text(match.group(0)) def auto_markup(app, doctree, name): # @@ -97,7 +244,7 @@ def auto_markup(app, doctree, name): for para in doctree.traverse(nodes.paragraph): for node in para.traverse(nodes.Text): if not isinstance(node.parent, nodes.literal): - node.parent.replace(node, markup_funcs(name, app, node)) + node.parent.replace(node, markup_refs(name, app, node)) def setup(app): app.connect('doctree-resolved', auto_markup) diff --git a/Documentation/sphinx/cdomain.py b/Documentation/sphinx/cdomain.py index cbac8e608dc4..014a5229e57a 100644 --- a/Documentation/sphinx/cdomain.py +++ b/Documentation/sphinx/cdomain.py @@ -40,14 +40,94 @@ from sphinx import addnodes from sphinx.domains.c import c_funcptr_sig_re, c_sig_re from sphinx.domains.c import CObject as Base_CObject from sphinx.domains.c import CDomain as Base_CDomain +from itertools import chain +import re -__version__ = '1.0' +__version__ = '1.1' # Get Sphinx version major, minor, patch = sphinx.version_info[:3] +# Namespace to be prepended to the full name +namespace = None + +# +# Handle trivial newer c domain tags that are part of Sphinx 3.1 c domain tags +# - Store the namespace if ".. c:namespace::" tag is found +# +RE_namespace = re.compile(r'^\s*..\s*c:namespace::\s*(\S+)\s*$') + +def markup_namespace(match): + global namespace + + namespace = match.group(1) + + return "" + +# +# Handle c:macro for function-style declaration +# +RE_macro = re.compile(r'^\s*..\s*c:macro::\s*(\S+)\s+(\S.*)\s*$') +def markup_macro(match): + return ".. c:function:: " + match.group(1) + ' ' + match.group(2) + +# +# Handle newer c domain tags that are evaluated as .. c:type: for +# backward-compatibility with Sphinx < 3.0 +# +RE_ctype = re.compile(r'^\s*..\s*c:(struct|union|enum|enumerator|alias)::\s*(.*)$') + +def markup_ctype(match): + return ".. c:type:: " + match.group(2) + +# +# Handle newer c domain tags that are evaluated as :c:type: for +# backward-compatibility with Sphinx < 3.0 +# +RE_ctype_refs = re.compile(r':c:(var|struct|union|enum|enumerator)::`([^\`]+)`') +def markup_ctype_refs(match): + return ":c:type:`" + match.group(2) + '`' + +# +# Simply convert :c:expr: and :c:texpr: into a literal block. +# +RE_expr = re.compile(r':c:(expr|texpr):`([^\`]+)`') +def markup_c_expr(match): + return '\ ``' + match.group(2) + '``\ ' + +# +# Parse Sphinx 3.x C markups, replacing them by backward-compatible ones +# +def c_markups(app, docname, source): + result = "" + markup_func = { + RE_namespace: markup_namespace, + RE_expr: markup_c_expr, + RE_macro: markup_macro, + RE_ctype: markup_ctype, + RE_ctype_refs: markup_ctype_refs, + } + + lines = iter(source[0].splitlines(True)) + for n in lines: + match_iterators = [regex.finditer(n) for regex in markup_func] + matches = sorted(chain(*match_iterators), key=lambda m: m.start()) + for m in matches: + n = n[:m.start()] + markup_func[m.re](m) + n[m.end():] + + result = result + n + + source[0] = result + +# +# Now implements support for the cdomain namespacing logic +# + def setup(app): + # Handle easy Sphinx 3.1+ simple new tags: :c:expr and .. c:namespace:: + app.connect('source-read', c_markups) + if (major == 1 and minor < 8): app.override_domain(CDomain) else: @@ -75,6 +155,8 @@ class CObject(Base_CObject): function-like macro, the name of the macro is returned. Otherwise ``False`` is returned. """ + global namespace + if not self.objtype == 'function': return False @@ -107,11 +189,16 @@ class CObject(Base_CObject): param += nodes.emphasis(argname, argname) paramlist += param + if namespace: + fullname = namespace + "." + fullname + return fullname def handle_signature(self, sig, signode): """Transform a C signature into RST nodes.""" + global namespace + fullname = self.handle_func_like_macro(sig, signode) if not fullname: fullname = super(CObject, self).handle_signature(sig, signode) @@ -122,6 +209,10 @@ class CObject(Base_CObject): else: # FIXME: handle :name: value of other declaration types? pass + else: + if namespace: + fullname = namespace + "." + fullname + return fullname def add_target_and_index(self, name, sig, signode): diff --git a/Documentation/sphinx/kerneldoc.py b/Documentation/sphinx/kerneldoc.py index 4bcbd6ae01cd..e9857ab904f1 100644 --- a/Documentation/sphinx/kerneldoc.py +++ b/Documentation/sphinx/kerneldoc.py @@ -62,6 +62,7 @@ class KernelDocDirective(Directive): 'export': directives.unchanged, 'internal': directives.unchanged, 'identifiers': directives.unchanged, + 'no-identifiers': directives.unchanged, 'functions': directives.unchanged, } has_content = False @@ -70,6 +71,11 @@ class KernelDocDirective(Directive): env = self.state.document.settings.env cmd = [env.config.kerneldoc_bin, '-rst', '-enable-lineno'] + # Pass the version string to kernel-doc, as it needs to use a different + # dialect, depending what the C domain supports for each specific + # Sphinx versions + cmd += ['-sphinx-version', sphinx.__version__] + filename = env.config.kerneldoc_srctree + '/' + self.arguments[0] export_file_patterns = [] @@ -99,6 +105,12 @@ class KernelDocDirective(Directive): else: cmd += ['-no-doc-sections'] + if 'no-identifiers' in self.options: + no_identifiers = self.options.get('no-identifiers').split() + if no_identifiers: + for i in no_identifiers: + cmd += ['-nosymbol', i] + for pattern in export_file_patterns: for f in glob.glob(env.config.kerneldoc_srctree + '/' + pattern): env.note_dependency(os.path.abspath(f)) @@ -136,7 +148,8 @@ class KernelDocDirective(Directive): lineoffset = int(match.group(1)) - 1 # we must eat our comments since the upset the markup else: - result.append(line, filename, lineoffset) + doc = env.srcdir + "/" + env.docname + ":" + str(self.lineno) + result.append(line, doc + ": " + filename, lineoffset) lineoffset += 1 node = nodes.section() diff --git a/Documentation/sphinx/parse-headers.pl b/Documentation/sphinx/parse-headers.pl index 00a69aceff44..1910079f984f 100755 --- a/Documentation/sphinx/parse-headers.pl +++ b/Documentation/sphinx/parse-headers.pl @@ -110,7 +110,7 @@ while (<IN>) { ) { my $s = $1; - $structs{$s} = "struct :c:type:`$s`\\ "; + $structs{$s} = "struct $s\\ "; next; } } diff --git a/Documentation/trace/boottime-trace.rst b/Documentation/trace/boottime-trace.rst index dcb390075ca1..89b64334929b 100644 --- a/Documentation/trace/boottime-trace.rst +++ b/Documentation/trace/boottime-trace.rst @@ -61,6 +61,10 @@ These options can be used for each instance including global ftrace node. ftrace.[instance.INSTANCE.]options = OPT1[, OPT2[...]] Enable given ftrace options. +ftrace.[instance.INSTANCE.]tracing_on = 0|1 + Enable/Disable tracing on this instance when starting boot-time tracing. + (you can enable it by the "traceon" event trigger action) + ftrace.[instance.INSTANCE.]trace_clock = CLOCK Set given CLOCK to ftrace's trace_clock. @@ -116,6 +120,20 @@ instance node, but those are also visible from other instances. So please take care for event name conflict. +When to Start +============= + +All boot-time tracing options starting with ``ftrace`` will be enabled at the +end of core_initcall. This means you can trace the events from postcore_initcall. +Most of the subsystems and architecture dependent drivers will be initialized +after that (arch_initcall or subsys_initcall). Thus, you can trace those with +boot-time tracing. +If you want to trace events before core_initcall, you can use the options +starting with ``kernel``. Some of them will be enabled eariler than the initcall +processing (for example,. ``kernel.ftrace=function`` and ``kernel.trace_event`` +will start before the initcall.) + + Examples ======== @@ -164,6 +182,26 @@ is for tracing functions starting with "user\_", and others tracing The instance node also accepts event nodes so that each instance can customize its event tracing. +With the trigger action and kprobes, you can trace function-graph while +a function is called. For example, this will trace all function calls in +the pci_proc_init():: + + ftrace { + tracing_on = 0 + tracer = function_graph + event.kprobes { + start_event { + probes = "pci_proc_init" + actions = "traceon" + } + end_event { + probes = "pci_proc_init%return" + actions = "traceoff" + } + } + } + + This boot-time tracing also supports ftrace kernel parameters via boot config. For example, following kernel parameters:: diff --git a/Documentation/trace/events.rst b/Documentation/trace/events.rst index f792b1959a33..2a5aa48eff6c 100644 --- a/Documentation/trace/events.rst +++ b/Documentation/trace/events.rst @@ -589,8 +589,19 @@ name:: { .type = "int", .name = "my_int_field" }, }; -See synth_field_size() for available types. If field_name contains [n] -the field is considered to be an array. +See synth_field_size() for available types. + +If field_name contains [n], the field is considered to be a static array. + +If field_names contains[] (no subscript), the field is considered to +be a dynamic array, which will only take as much space in the event as +is required to hold the array. + +Because space for an event is reserved before assigning field values +to the event, using dynamic arrays implies that the piecewise +in-kernel API described below can't be used with dynamic arrays. The +other non-piecewise in-kernel APIs can, however, be used with dynamic +arrays. If the event is created from within a module, a pointer to the module must be passed to synth_event_create(). This will ensure that the diff --git a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst index 2a05e770618a..a4955f7e3d19 100644 --- a/Documentation/trace/ftrace-uses.rst +++ b/Documentation/trace/ftrace-uses.rst @@ -55,17 +55,17 @@ an ftrace_ops with ftrace: Both .flags and .private are optional. Only .func is required. -To enable tracing call: +To enable tracing call:: -.. c:function:: register_ftrace_function(&ops); + register_ftrace_function(&ops); -To disable tracing call: +To disable tracing call:: -.. c:function:: unregister_ftrace_function(&ops); + unregister_ftrace_function(&ops); -The above is defined by including the header: +The above is defined by including the header:: -.. c:function:: #include <linux/ftrace.h> + #include <linux/ftrace.h> The registered callback will start being called some time after the register_ftrace_function() is called and before it returns. The exact time diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst index 8408670d0328..b71e09f745c3 100644 --- a/Documentation/trace/histogram.rst +++ b/Documentation/trace/histogram.rst @@ -1495,7 +1495,7 @@ Extended error information # { stacktrace: - _do_fork+0x18e/0x330 + kernel_clone+0x18e/0x330 kernel_thread+0x29/0x30 kthreadd+0x154/0x1b0 ret_from_fork+0x3f/0x70 @@ -1588,7 +1588,7 @@ Extended error information SYSC_sendto+0xef/0x170 } hitcount: 88 { stacktrace: - _do_fork+0x18e/0x330 + kernel_clone+0x18e/0x330 SyS_clone+0x19/0x20 entry_SYSCALL_64_fastpath+0x12/0x6a } hitcount: 244 @@ -1776,6 +1776,24 @@ consisting of the name of the new event along with one or more variables and their types, which can be any valid field type, separated by semicolons, to the tracing/synthetic_events file. +See synth_field_size() for available types. + +If field_name contains [n], the field is considered to be a static array. + +If field_names contains[] (no subscript), the field is considered to +be a dynamic array, which will only take as much space in the event as +is required to hold the array. + +A string field can be specified using either the static notation: + + char name[32]; + +Or the dynamic: + + char name[]; + +The size limit for either is 256. + For instance, the following creates a new event named 'wakeup_latency' with 3 fields: lat, pid, and prio. Each of those fields is simply a variable reference to a variable on another event:: diff --git a/Documentation/trace/kprobetrace.rst b/Documentation/trace/kprobetrace.rst index c1709165c553..b175d88f31eb 100644 --- a/Documentation/trace/kprobetrace.rst +++ b/Documentation/trace/kprobetrace.rst @@ -30,6 +30,7 @@ Synopsis of kprobe_events p[:[GRP/]EVENT] [MOD:]SYM[+offs]|MEMADDR [FETCHARGS] : Set a probe r[MAXACTIVE][:[GRP/]EVENT] [MOD:]SYM[+0] [FETCHARGS] : Set a return probe + p:[GRP/]EVENT] [MOD:]SYM[+0]%return [FETCHARGS] : Set a return probe -:[GRP/]EVENT : Clear a probe GRP : Group name. If omitted, use "kprobes" for it. @@ -37,10 +38,11 @@ Synopsis of kprobe_events based on SYM+offs or MEMADDR. MOD : Module name which has given SYM. SYM[+offs] : Symbol+offset where the probe is inserted. + SYM%return : Return address of the symbol MEMADDR : Address where the probe is inserted. MAXACTIVE : Maximum number of instances of the specified function that can be probed simultaneously, or 0 for the default value - as defined in Documentation/staging/kprobes.rst section 1.3.1. + as defined in Documentation/trace/kprobes.rst section 1.3.1. FETCHARGS : Arguments. Each probe can have up to 128 args. %REG : Fetch register REG diff --git a/Documentation/trace/ring-buffer-design.rst b/Documentation/trace/ring-buffer-design.rst index 9c8d22a53d6c..c5d77fcbb5bc 100644 --- a/Documentation/trace/ring-buffer-design.rst +++ b/Documentation/trace/ring-buffer-design.rst @@ -1,28 +1,4 @@ -.. This file is dual-licensed: you can use it either under the terms -.. of the GPL 2.0 or the GFDL 1.2 license, at your option. Note that this -.. dual licensing only applies to this file, and not this project as a -.. whole. -.. -.. a) This file is free software; you can redistribute it and/or -.. modify it under the terms of the GNU General Public License as -.. published by the Free Software Foundation version 2 of -.. the License. -.. -.. This file is distributed in the hope that it will be useful, -.. but WITHOUT ANY WARRANTY; without even the implied warranty of -.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.. GNU General Public License for more details. -.. -.. Or, alternatively, -.. -.. b) Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.2 version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GPL-2.0 OR GFDL-1.2 WITH no-invariant-sections +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.2-no-invariants-only =========================== Lockless Ring Buffer Design diff --git a/Documentation/trace/tracepoints.rst b/Documentation/trace/tracepoints.rst index 6e3ce3bf3593..0cb8d9ca3d60 100644 --- a/Documentation/trace/tracepoints.rst +++ b/Documentation/trace/tracepoints.rst @@ -146,3 +146,30 @@ with jump labels and avoid conditional branches. define tracepoints. Check http://lwn.net/Articles/379903, http://lwn.net/Articles/381064 and http://lwn.net/Articles/383362 for a series of articles with more details. + +If you require calling a tracepoint from a header file, it is not +recommended to call one directly or to use the trace_<tracepoint>_enabled() +function call, as tracepoints in header files can have side effects if a +header is included from a file that has CREATE_TRACE_POINTS set, as +well as the trace_<tracepoint>() is not that small of an inline +and can bloat the kernel if used by other inlined functions. Instead, +include tracepoint-defs.h and use tracepoint_enabled(). + +In a C file:: + + void do_trace_foo_bar_wrapper(args) + { + trace_foo_bar(args); + } + +In the header file:: + + DECLARE_TRACEPOINT(foo_bar); + + static inline void some_inline_function() + { + [..] + if (tracepoint_enabled(foo_bar)) + do_trace_foo_bar_wrapper(args); + [..] + } diff --git a/Documentation/trace/uprobetracer.rst b/Documentation/trace/uprobetracer.rst index 98cde99939d7..a8e5938f609e 100644 --- a/Documentation/trace/uprobetracer.rst +++ b/Documentation/trace/uprobetracer.rst @@ -28,6 +28,7 @@ Synopsis of uprobe_tracer p[:[GRP/]EVENT] PATH:OFFSET [FETCHARGS] : Set a uprobe r[:[GRP/]EVENT] PATH:OFFSET [FETCHARGS] : Set a return uprobe (uretprobe) + p[:[GRP/]EVENT] PATH:OFFSET%return [FETCHARGS] : Set a return uprobe (uretprobe) -:[GRP/]EVENT : Clear uprobe or uretprobe event GRP : Group name. If omitted, "uprobes" is the default value. @@ -35,6 +36,7 @@ Synopsis of uprobe_tracer on PATH+OFFSET. PATH : Path to an executable or a library. OFFSET : Offset where the probe is inserted. + OFFSET%return : Offset where the return probe is inserted. FETCHARGS : Arguments. Each probe can have up to 128 args. %REG : Fetch register REG diff --git a/Documentation/translations/it_IT/kernel-hacking/hacking.rst b/Documentation/translations/it_IT/kernel-hacking/hacking.rst index 6aab27a8d323..3d30b69f1ec1 100644 --- a/Documentation/translations/it_IT/kernel-hacking/hacking.rst +++ b/Documentation/translations/it_IT/kernel-hacking/hacking.rst @@ -402,7 +402,7 @@ il valore convertito. Tutte le varianti supportano anche il processo inverso: :c:func:`be32_to_cpu()`, eccetera. Queste funzioni hanno principalmente due varianti: la variante per -puntatori, come :c:func:`cpu_to_be32p(), che prende un puntatore +puntatori, come :c:func:`cpu_to_be32p()`, che prende un puntatore ad un tipo, e ritorna il valore convertito. L'altra variante per la famiglia di conversioni "in-situ", come :c:func:`cpu_to_be32s()`, che convertono il valore puntato da un puntatore, e ritornano void. diff --git a/Documentation/translations/it_IT/kernel-hacking/locking.rst b/Documentation/translations/it_IT/kernel-hacking/locking.rst index 4615df5723fb..bf1acd6204ef 100644 --- a/Documentation/translations/it_IT/kernel-hacking/locking.rst +++ b/Documentation/translations/it_IT/kernel-hacking/locking.rst @@ -1,5 +1,7 @@ .. include:: ../disclaimer-ita.rst +.. c:namespace:: it_IT + :Original: :ref:`Documentation/kernel-hacking/locking.rst <kernel_hacking_lock>` :Translator: Federico Vaga <federico.vaga@vaga.pv.it> diff --git a/Documentation/translations/it_IT/process/deprecated.rst b/Documentation/translations/it_IT/process/deprecated.rst index e108eaf82cf6..a642ff3fdc8b 100644 --- a/Documentation/translations/it_IT/process/deprecated.rst +++ b/Documentation/translations/it_IT/process/deprecated.rst @@ -130,7 +130,7 @@ chi usa solo stringe terminate. La versione sicura da usare è strscpy(). (chi usa strscpy() e necessita di estendere la terminazione con NUL deve aggiungere una chiamata a memset()) -Se il chiamate no usa stringhe terminate con NUL, allore strncpy()() +Se il chiamate no usa stringhe terminate con NUL, allore strncpy() può continuare ad essere usata, ma i buffer di destinazione devono essere marchiati con l'attributo `__nonstring <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_ per evitare avvisi durante la compilazione. diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst index 71d4823e41e1..240d29be38f2 100644 --- a/Documentation/translations/ko_KR/howto.rst +++ b/Documentation/translations/ko_KR/howto.rst @@ -284,9 +284,10 @@ Andrew Mortonì˜ ê¸€ì´ ìžˆë‹¤. 여러 ë©”ì´ì € 넘버를 갖는 다양한 ì•ˆì •ëœ ì»¤ë„ íŠ¸ë¦¬ë“¤ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -3 ìžë¦¬ 숫ìžë¡œ ì´ë£¨ì–´ì§„ ë²„ì ¼ì˜ ì»¤ë„ë“¤ì€ -stable 커ë„들ì´ë‹¤. ê·¸ê²ƒë“¤ì€ í•´ë‹¹ ë©”ì´ì € -ë©”ì¸ë¼ì¸ 릴리즈ì—ì„œ ë°œê²¬ëœ í° íšŒê·€ë“¤ì´ë‚˜ 보안 ë¬¸ì œë“¤ 중 비êµì ìž‘ê³ ì¤‘ìš”í•œ -ìˆ˜ì •ë“¤ì„ í¬í•¨í•˜ë©°, ì•žì˜ ë‘ ë²„ì „ 넘버는 ê°™ì€ ê¸°ë°˜ ë²„ì „ì„ ì˜ë¯¸í•œë‹¤. +ì„¸ê°œì˜ ë²„ì ¼ 넘버로 ì´ë£¨ì–´ì§„ ë²„ì ¼ì˜ ì»¤ë„ë“¤ì€ -stable 커ë„들ì´ë‹¤. ê·¸ê²ƒë“¤ì€ í•´ë‹¹ +ë©”ì´ì € ë©”ì¸ë¼ì¸ 릴리즈ì—ì„œ ë°œê²¬ëœ í° íšŒê·€ë“¤ì´ë‚˜ 보안 ë¬¸ì œë“¤ 중 비êµì ìž‘ê³ +중요한 ìˆ˜ì •ë“¤ì„ í¬í•¨í•œë‹¤. 주요 stable 시리즈 릴리즈는 세번째 ë²„ì ¼ 넘버를 +ì¦ê°€ì‹œí‚¤ë©° ì•žì˜ ë‘ ë²„ì ¼ 넘버는 그대로 ìœ ì§€í•œë‹¤. ì´ê²ƒì€ 가장 ìµœê·¼ì˜ ì•ˆì •ì ì¸ ì»¤ë„ì„ ì›í•˜ëŠ” 사용ìžì—게 추천ë˜ëŠ” 브랜치ì´ë©°, 개발/실험ì ë²„ì ¼ì„ í…ŒìŠ¤íŠ¸í•˜ëŠ” ê²ƒì„ ë•ê³ ìž í•˜ëŠ” 사용ìžë“¤ê³¼ëŠ” 별로 ê´€ë ¨ì´ ì—†ë‹¤. @@ -316,7 +317,7 @@ Andrew Mortonì˜ ê¸€ì´ ìžˆë‹¤. ì œì•ˆëœ íŒ¨ì¹˜ëŠ” 서브시스템 íŠ¸ë¦¬ì— ì»¤ë°‹ë˜ê¸° ì „ì— ë©”ì¼ë§ 리스트를 통해 리뷰ëœë‹¤(ì•„ëž˜ì˜ ê´€ë ¨ ì„¹ì…˜ì„ ì°¸ê³ í•˜ê¸° 바란다). ì¼ë¶€ ì»¤ë„ ì„œë¸Œì‹œìŠ¤í…œì˜ ê²½ìš°, ì´ ë¦¬ë·° 프로세스는 patchworkë¼ëŠ” ë„구를 통해 추ì ëœë‹¤. patchworkì€ ë“±ë¡ëœ 패치와 -íŒ¨ì¹˜ì— ëŒ€í•œ 코멘트, íŒ¨ì¹˜ì˜ ë²„ì „ì„ ë³¼ 수 있는 웹 ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ ì œê³µí•˜ê³ , +íŒ¨ì¹˜ì— ëŒ€í•œ 코멘트, íŒ¨ì¹˜ì˜ ë²„ì ¼ì„ ë³¼ 수 있는 웹 ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ ì œê³µí•˜ê³ , ë©”ì¸í…Œì´ë„ˆëŠ” 패치를 리뷰 중, 리뷰 통과, ë˜ëŠ” ë°˜ë ¤ë¨ìœ¼ë¡œ í‘œì‹œí• ìˆ˜ 있다. ëŒ€ë¶€ë¶„ì˜ ì´ëŸ¬í•œ patchwork 사ì´íŠ¸ëŠ” https://patchwork.kernel.org/ ì— ë‚˜ì—´ë˜ì–´ 있다. diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt index 9dcc7c9d52e6..64d932f5dc77 100644 --- a/Documentation/translations/ko_KR/memory-barriers.txt +++ b/Documentation/translations/ko_KR/memory-barriers.txt @@ -91,7 +91,6 @@ Documentation/memory-barriers.txt - 컴파ì¼ëŸ¬ 배리어. - CPU 메모리 배리어. - - MMIO 쓰기 배리어. (*) 암묵ì ì»¤ë„ ë©”ëª¨ë¦¬ 배리어. @@ -103,7 +102,6 @@ Documentation/memory-barriers.txt (*) CPU ê°„ ACQUIRING ë°°ë¦¬ì–´ì˜ íš¨ê³¼. - Acquire vs 메모리 액세스. - - Acquire vs I/O 액세스. (*) 메모리 배리어가 필요한 ê³³ @@ -515,14 +513,13 @@ CPU ì—게 ê¸°ëŒ€í• ìˆ˜ 있는 ìµœì†Œí•œì˜ ë³´ìž¥ì‚¬í• ëª‡ê°€ì§€ê°€ 있습니 완료ë˜ê¸° ì „ì— í–‰í•´ì§„ 것처럼 ë³´ì¼ ìˆ˜ 있습니다. ACQUIRE 와 RELEASE 오í¼ë ˆì´ì…˜ì˜ ì‚¬ìš©ì€ ì¼ë°˜ì 으로 다른 메모리 ë°°ë¦¬ì–´ì˜ - í•„ìš”ì„±ì„ ì—†ì•±ë‹ˆë‹¤ (하지만 "MMIO 쓰기 배리어" 서브섹션ì—ì„œ 설명ë˜ëŠ” 예외를 - 알아ë‘세요). ë˜í•œ, RELEASE+ACQUIRE ì¡°í•©ì€ ë²”ìš© 메모리 배리어처럼 ë™ìž‘í• - ê²ƒì„ ë³´ìž¥í•˜ì§€ -않습니다-. 하지만, ì–´ë–¤ ë³€ìˆ˜ì— ëŒ€í•œ RELEASE 오í¼ë ˆì´ì…˜ì„ - 앞서는 메모리 ì•¡ì„¸ìŠ¤ë“¤ì˜ ìˆ˜í–‰ 결과는 ì´ RELEASE 오í¼ë ˆì´ì…˜ì„ ë’¤ì´ì–´ ê°™ì€ - ë³€ìˆ˜ì— ëŒ€í•´ ìˆ˜í–‰ëœ ACQUIRE 오í¼ë ˆì´ì…˜ì„ 뒤따르는 메모리 액세스ì—는 보여질 - ê²ƒì´ ë³´ìž¥ë©ë‹ˆë‹¤. 다르게 ë§í•˜ìžë©´, 주어진 ë³€ìˆ˜ì˜ í¬ë¦¬í‹°ì»¬ 섹션ì—서는, 해당 - ë³€ìˆ˜ì— ëŒ€í•œ ì•žì˜ í¬ë¦¬í‹°ì»¬ 섹션ì—ì„œì˜ ëª¨ë“ ì•¡ì„¸ìŠ¤ë“¤ì´ ì™„ë£Œë˜ì—ˆì„ ê²ƒì„ - 보장합니다. + í•„ìš”ì„±ì„ ì—†ì•±ë‹ˆë‹¤. ë˜í•œ, RELEASE+ACQUIRE ì¡°í•©ì€ ë²”ìš© 메모리 배리어처럼 + ë™ìž‘í• ê²ƒì„ ë³´ìž¥í•˜ì§€ -않습니다-. 하지만, ì–´ë–¤ ë³€ìˆ˜ì— ëŒ€í•œ RELEASE + 오í¼ë ˆì´ì…˜ì„ 앞서는 메모리 ì•¡ì„¸ìŠ¤ë“¤ì˜ ìˆ˜í–‰ 결과는 ì´ RELEASE 오í¼ë ˆì´ì…˜ì„ + ë’¤ì´ì–´ ê°™ì€ ë³€ìˆ˜ì— ëŒ€í•´ ìˆ˜í–‰ëœ ACQUIRE 오í¼ë ˆì´ì…˜ì„ 뒤따르는 메모리 + 액세스ì—는 보여질 ê²ƒì´ ë³´ìž¥ë©ë‹ˆë‹¤. 다르게 ë§í•˜ìžë©´, 주어진 ë³€ìˆ˜ì˜ + í¬ë¦¬í‹°ì»¬ 섹션ì—서는, 해당 ë³€ìˆ˜ì— ëŒ€í•œ ì•žì˜ í¬ë¦¬í‹°ì»¬ 섹션ì—ì„œì˜ ëª¨ë“ + ì•¡ì„¸ìŠ¤ë“¤ì´ ì™„ë£Œë˜ì—ˆì„ ê²ƒì„ ë³´ìž¥í•©ë‹ˆë‹¤. 즉, ACQUIRE 는 ìµœì†Œí•œì˜ "ì·¨ë“" ë™ìž‘처럼, ê·¸ë¦¬ê³ RELEASE 는 ìµœì†Œí•œì˜ "공개" 처럼 ë™ìž‘한다는 ì˜ë¯¸ìž…니다. @@ -1501,8 +1498,6 @@ u ë¡œì˜ ìŠ¤í† ì–´ë¥¼ cpu1() ì˜ v ë¡œë¶€í„°ì˜ ë¡œë“œ ë’¤ì— ì¼ì–´ë‚œ ê²ƒìœ¼ë¡ (*) CPU 메모리 배리어. - (*) MMIO 쓰기 배리어. - 컴파ì¼ëŸ¬ 배리어 --------------- @@ -1909,6 +1904,19 @@ Mandatory ë°°ë¦¬ì–´ë“¤ì€ SMP 시스템ì—ì„œë„ UP 시스템ì—ì„œë„ SMP íš¨ê³ "ì»¤ë„ I/O ë°°ë¦¬ì–´ì˜ íš¨ê³¼" 섹션ì„, consistent memory ì— ëŒ€í•œ ìžì„¸í•œ ë‚´ìš©ì„ ìœ„í•´ì„ Documentation/core-api/dma-api.rst 문서를 ì°¸ê³ í•˜ì„¸ìš”. + (*) pmem_wmb(); + + ì´ê²ƒì€ persistent memory 를 위한 것으로, persistent ì €ìž¥ì†Œì— ê°€í•´ì§„ 변경 + 사í•ì´ í”Œëž«í¼ ì—°ì†ì„± ë„ë©”ì¸ì— ë„ë‹¬í–ˆì„ ê²ƒì„ ë³´ìž¥í•˜ê¸° 위한 것입니다. + + 예를 들어, ìž„ì‹œì ì´ì§€ ì•Šì€ pmem ì˜ì—ìœ¼ë¡œì˜ ì“°ê¸° 후, 우리는 쓰기가 í”Œëž«í¼ + ì—°ì†ì„± ë„ë©”ì¸ì— ë„ë‹¬í–ˆì„ ê²ƒì„ ë³´ìž¥í•˜ê¸° 위해 pmem_wmb() 를 사용합니다. + ì´ëŠ” 쓰기가 뒤따르는 instruction ë“¤ì´ ìœ ë°œí•˜ëŠ” ì–´ë– í•œ ë°ì´í„° 액세스나 + ë°ì´í„° ì „ì†¡ì˜ ì‹œìž‘ ì „ì— persistent ì €ìž¥ì†Œë¥¼ ì—…ë°ì´íŠ¸ í–ˆì„ ê²ƒì„ ë³´ìž¥í•©ë‹ˆë‹¤. + ì´ëŠ” wmb() ì— ì˜í•´ ì´ë¤„지는 순서 ê·œì¹™ì„ í¬í•¨í•©ë‹ˆë‹¤. + + Persistent memory ì—ì„œì˜ ë¡œë“œë¥¼ ìœ„í•´ì„ í˜„ìž¬ì˜ ì½ê¸° 메모리 ë°°ë¦¬ì–´ë¡œë„ ì½ê¸° + 순서를 ë³´ìž¥í•˜ëŠ”ë° ì¶©ë¶„í•©ë‹ˆë‹¤. ========================= 암묵ì ì»¤ë„ ë©”ëª¨ë¦¬ 배리어 diff --git a/Documentation/translations/zh_CN/arm64/amu.rst b/Documentation/translations/zh_CN/arm64/amu.rst new file mode 100644 index 000000000000..ab7180f91394 --- /dev/null +++ b/Documentation/translations/zh_CN/arm64/amu.rst @@ -0,0 +1,100 @@ +.. include:: ../disclaimer-zh_CN.rst + +:Original: :ref:`Documentation/arm64/amu.rst <amu_index>` + +Translator: Bailu Lin <bailu.lin@vivo.com> + +================================== +AArch64 Linux ä¸æ‰©å±•çš„活动监控å•å…ƒ +================================== + +作者: Ionela Voinescu <ionela.voinescu@arm.com> + +日期: 2019-09-10 + +本文档简è¦æ述了 AArch64 Linux 支æŒçš„活动监控å•å…ƒçš„规范。 + + +架构总述 +-------- + +活动监控是 ARMv8.4 CPU 架构引入的一个å¯é€‰æ‰©å±•ç‰¹æ€§ã€‚ + +活动监控å•å…ƒ(在æ¯ä¸ª CPU ä¸å®žçŽ°)为系统管ç†æ供了性能计数器。既å¯ä»¥é€š +过系统寄å˜å™¨çš„æ–¹å¼è®¿é—®è®¡æ•°å™¨ï¼ŒåŒæ—¶ä¹Ÿæ”¯æŒå¤–部内å˜æ˜ å°„çš„æ–¹å¼è®¿é—®è®¡æ•°å™¨ã€‚ + +AMUv1 架构实现了一个由4个固定的64ä½äº‹ä»¶è®¡æ•°å™¨ç»„æˆçš„计数器组。 + + - CPU å‘¨æœŸè®¡æ•°å™¨ï¼šåŒ CPU 的频率增长 + - 常é‡è®¡æ•°å™¨ï¼šåŒå›ºå®šçš„系统时钟频率增长 + - 淘汰指令计数器: åŒæ¯æ¬¡æž¶æž„指令执行增长 + - 内å˜åœé¡¿å‘¨æœŸè®¡æ•°å™¨ï¼šè®¡ç®—由在时钟域内的最åŽä¸€çº§ç¼“å˜ä¸æœªå‘½ä¸è€Œå¼•èµ· + 的指令调度åœé¡¿å‘¨æœŸæ•° + +当处于 WFI 或者 WFE 状æ€æ—¶ï¼Œè®¡æ•°å™¨ä¸ä¼šå¢žé•¿ã€‚ + +AMU 架构æ供了一个高达16ä½çš„事件计数器空间，未æ¥æ–°çš„ AMU 版本ä¸å¯èƒ½ +用它æ¥å®žçŽ°æ–°å¢žçš„事件计数器。 + +å¦å¤–，AMUv1 实现了一个多达16个64ä½è¾…助事件计数器的计数器组。 + +冷å¤ä½æ—¶æ‰€æœ‰çš„计数器会清零。 + + +åŸºæœ¬æ”¯æŒ +-------- + +å†…æ ¸å¯ä»¥å®‰å…¨åœ°è¿è¡Œåœ¨æ”¯æŒ AMU å’Œä¸æ”¯æŒ AMU çš„ CPU 组åˆä¸ã€‚ +å› æ¤ï¼Œå½“é…ç½® CONFIG_ARM64_AMU_EXTN åŽæˆ‘ä»¬æ— æ¡ä»¶ä½¿èƒ½åŽç» +(secondary or hotplugged) CPU 检测和使用这个特性。 + +当在 CPU ä¸Šæ£€æµ‹åˆ°è¯¥ç‰¹æ€§æ—¶ï¼Œæˆ‘ä»¬ä¼šæ ‡è®°ä¸ºç‰¹æ€§å¯ç”¨ä½†æ˜¯ä¸èƒ½ä¿è¯è®¡æ•°å™¨çš„功能， +仅表明有扩展属性。 + +固件(代ç è¿è¡Œåœ¨é«˜å¼‚常级别，例如 arm-tf )需支æŒä»¥ä¸‹åŠŸèƒ½ï¼š + + - æ供低异常级别(EL2 å’Œ EL1)访问 AMU 寄å˜å™¨çš„能力。 + - 使能计数器。如果未使能，它的值应为 0。 + - 在从电æºå…³é—状æ€å¯åŠ¨ CPU å‰æˆ–åŽä¿å˜æˆ–者æ¢å¤è®¡æ•°å™¨ã€‚ + +å½“ä½¿ç”¨ä½¿èƒ½äº†è¯¥ç‰¹æ€§çš„å†…æ ¸å¯åŠ¨ä½†å›ºä»¶æŸå时，访问计数器寄å˜å™¨å¯èƒ½ä¼šéé‡ +panic 或者æ»é”。å³ä½¿æœªå‘现这些症状，计数器寄å˜å™¨è¿”回的数æ®ç»“果并ä¸ä¸€ +定能åæ˜ çœŸå®žæƒ…å†µã€‚é€šå¸¸ï¼Œè®¡æ•°å™¨ä¼šè¿”å›ž 0，表明他们未被使能。 + +如果固件没有æ供适当的支æŒæœ€å¥½å…³é— CONFIG_ARM64_AMU_EXTN。 +值得注æ„çš„æ˜¯ï¼Œå‡ºäºŽå®‰å…¨åŽŸå› ï¼Œä¸è¦ç»•è¿‡ AMUSERRENR_EL0 设置而æ•èŽ·ä»Ž +EL0(用户空间) 访问 EL1(å†…æ ¸ç©ºé—´)。 å› æ¤ï¼Œå›ºä»¶åº”该确ä¿è®¿é—® AMU寄å˜å™¨ +ä¸ä¼šå›°åœ¨ EL2或EL3。 + +AMUv1 的固定计数器å¯ä»¥é€šè¿‡å¦‚下系统寄å˜å™¨è®¿é—®ï¼š + + - SYS_AMEVCNTR0_CORE_EL0 + - SYS_AMEVCNTR0_CONST_EL0 + - SYS_AMEVCNTR0_INST_RET_EL0 + - SYS_AMEVCNTR0_MEM_STALL_EL0 + +特定辅助计数器å¯ä»¥é€šè¿‡ SYS_AMEVCNTR1_EL0(n) 访问，其ä¸n介于0到15。 + +详细信æ¯å®šä¹‰åœ¨ç›®å½•ï¼šarch/arm64/include/asm/sysreg.h。 + + +用户空间访问 +------------ + +ç”±äºŽä»¥ä¸‹åŽŸå› ï¼Œå½“å‰ç¦æ¢ä»Žç”¨æˆ·ç©ºé—´è®¿é—® AMU 的寄å˜å™¨ï¼š + + - å®‰å…¨å› æ•°ï¼šå¯èƒ½ä¼šæš´éœ²å¤„于安全模å¼æ‰§è¡Œçš„代ç ä¿¡æ¯ã€‚ + - æ„愿：AMU 是用于系统管ç†çš„。 + +åŒæ ·ï¼Œè¯¥åŠŸèƒ½å¯¹ç”¨æˆ·ç©ºé—´ä¸å¯è§ã€‚ + + +虚拟化 +------ + +ç”±äºŽä»¥ä¸‹åŽŸå› ï¼Œå½“å‰ç¦æ¢ä»Ž KVM 客户端的用户空间(EL0)å’Œå†…æ ¸ç©ºé—´(EL1) +访问 AMU 的寄å˜å™¨ï¼š + + - å®‰å…¨å› æ•°ï¼šå¯èƒ½ä¼šæš´éœ²ç»™å…¶ä»–客户端或主机端执行的代ç ä¿¡æ¯ã€‚ + +任何试图访问 AMU 寄å˜å™¨çš„行为都会触å‘一个注册在客户端的未定义异常。 diff --git a/Documentation/translations/zh_CN/arm64/hugetlbpage.rst b/Documentation/translations/zh_CN/arm64/hugetlbpage.rst new file mode 100644 index 000000000000..13304d269d0b --- /dev/null +++ b/Documentation/translations/zh_CN/arm64/hugetlbpage.rst @@ -0,0 +1,45 @@ +.. include:: ../disclaimer-zh_CN.rst + +:Original: :ref:`Documentation/arm64/hugetlbpage.rst <hugetlbpage_index>` + +Translator: Bailu Lin <bailu.lin@vivo.com> + +===================== +ARM64ä¸çš„ HugeTLBpage +===================== + +大页ä¾é 有效利用 TLBs æ¥æ高地å€ç¿»è¯‘的性能。这å–决于以下 +两点 - + + - å¤§é¡µçš„å¤§å° + - TLBs 支æŒçš„æ¡ç›®å¤§å° + +ARM64 接å£æ”¯æŒ2ç§å¤§é¡µæ–¹å¼ã€‚ + +1) pud/pmd 级别的å—æ˜ å°„ +----------------------- + +这是常规大页，他们的 pmd 或 pud 页é¢è¡¨æ¡ç›®æŒ‡å‘一个内å˜å—。 +ä¸ç®¡ TLB ä¸æ”¯æŒçš„æ¡ç›®å¤§å°å¦‚何，å—æ˜ å°„å¯ä»¥å‡å°‘ç¿»è¯‘å¤§é¡µåœ°å€ +所需é历的页表深度。 + +2) 使用连ç»ä½ +------------- + +架构ä¸è½¬æ¢é¡µè¡¨æ¡ç›®(D4.5.3, ARM DDI 0487C.a)ä¸æä¾›ä¸€ä¸ªè¿žç» +ä½å‘Šè¯‰ MMU 这个æ¡ç›®æ˜¯ä¸€ä¸ªè¿žç»æ¡ç›®é›†çš„一员，它å¯ä»¥è¢«ç¼“å˜åœ¨å• +个 TLB æ¡ç›®ä¸ã€‚ + +在 Linux ä¸è¿žç»ä½ç”¨æ¥å¢žåŠ pmd å’Œ pte(最åŽä¸€çº§)çº§åˆ«æ˜ å°„çš„å¤§ +å°ã€‚å—支æŒçš„è¿žç»é¡µè¡¨æ¡ç›®æ•°é‡å› 页é¢å¤§å°å’Œé¡µè¡¨çº§åˆ«è€Œå¼‚。 + + +支æŒä»¥ä¸‹å¤§é¡µå°ºå¯¸é…ç½® - + + ====== ======== ==== ======== === + - CONT PTE PMD CONT PMD PUD + ====== ======== ==== ======== === + 4K: 64K 2M 32M 1G + 16K: 2M 32M 1G + 64K: 2M 512M 16G + ====== ======== ==== ======== === diff --git a/Documentation/translations/zh_CN/arm64/index.rst b/Documentation/translations/zh_CN/arm64/index.rst new file mode 100644 index 000000000000..e31a6090384d --- /dev/null +++ b/Documentation/translations/zh_CN/arm64/index.rst @@ -0,0 +1,17 @@ +.. include:: ../disclaimer-zh_CN.rst + +:Original: :ref:`Documentation/arm64/index.rst <arm64_index>` +:Translator: Bailu Lin <bailu.lin@vivo.com> + +.. _cn_arm64_index: + + +========== +ARM64 架构 +========== + +.. toctree:: + :maxdepth: 2 + + amu + hugetlbpage diff --git a/Documentation/translations/zh_CN/filesystems/sysfs.txt b/Documentation/translations/zh_CN/filesystems/sysfs.txt index 9481e3ed2a06..046cc1d52058 100644 --- a/Documentation/translations/zh_CN/filesystems/sysfs.txt +++ b/Documentation/translations/zh_CN/filesystems/sysfs.txt @@ -154,14 +154,13 @@ sysfs ä¼šä¸ºè¿™ä¸ªç±»åž‹è°ƒç”¨é€‚å½“çš„æ–¹æ³•ã€‚å½“ä¸€ä¸ªæ–‡ä»¶è¢«è¯»å†™æ—¶ï¼Œè¿ ç¤ºä¾‹: -#define to_dev(obj) container_of(obj, struct device, kobj) #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr) static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) { struct device_attribute *dev_attr = to_dev_attr(attr); - struct device *dev = to_dev(kobj); + struct device *dev = kobj_to_dev(kobj); ssize_t ret = -EIO; if (dev_attr->show) diff --git a/Documentation/translations/zh_CN/index.rst b/Documentation/translations/zh_CN/index.rst index 85643e46e308..be6f11176200 100644 --- a/Documentation/translations/zh_CN/index.rst +++ b/Documentation/translations/zh_CN/index.rst @@ -19,6 +19,7 @@ admin-guide/index process/index filesystems/index + arm64/index ç›®å½•å’Œè¡¨æ ¼ ---------- diff --git a/Documentation/userspace-api/ioctl/hdio.rst b/Documentation/userspace-api/ioctl/hdio.rst index e822e3dff176..817371bf94e9 100644 --- a/Documentation/userspace-api/ioctl/hdio.rst +++ b/Documentation/userspace-api/ioctl/hdio.rst @@ -181,7 +181,7 @@ HDIO_SET_UNMASKINTR error return: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - EACCES Access denied: requires CAP_SYS_ADMIN - EINVAL value out of range [0 1] - EBUSY Controller busy @@ -231,7 +231,7 @@ HDIO_SET_MULTCOUNT error return: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - EACCES Access denied: requires CAP_SYS_ADMIN - EINVAL value out of range supported by disk. - EBUSY Controller busy or blockmode already set. @@ -295,7 +295,7 @@ HDIO_GET_IDENTITY the ATA specification. error returns: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - ENOMSG IDENTIFY DEVICE information not available notes: @@ -355,7 +355,7 @@ HDIO_SET_KEEPSETTINGS error return: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - EACCES Access denied: requires CAP_SYS_ADMIN - EINVAL value out of range [0 1] - EBUSY Controller busy @@ -1055,7 +1055,7 @@ HDIO_SET_32BIT error return: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - EACCES Access denied: requires CAP_SYS_ADMIN - EINVAL value out of range [0 3] - EBUSY Controller busy @@ -1085,7 +1085,7 @@ HDIO_SET_NOWERR error return: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - EACCES Access denied: requires CAP_SYS_ADMIN - EINVAL value out of range [0 1] - EBUSY Controller busy @@ -1113,7 +1113,7 @@ HDIO_SET_DMA error return: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - EACCES Access denied: requires CAP_SYS_ADMIN - EINVAL value out of range [0 1] - EBUSY Controller busy @@ -1141,7 +1141,7 @@ HDIO_SET_PIO_MODE error return: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - EACCES Access denied: requires CAP_SYS_ADMIN - EINVAL value out of range [0 255] - EBUSY Controller busy @@ -1237,7 +1237,7 @@ HDIO_SET_WCACHE error return: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - EACCES Access denied: requires CAP_SYS_ADMIN - EINVAL value out of range [0 1] - EBUSY Controller busy @@ -1265,7 +1265,7 @@ HDIO_SET_ACOUSTIC error return: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - EACCES Access denied: requires CAP_SYS_ADMIN - EINVAL value out of range [0 254] - EBUSY Controller busy @@ -1305,7 +1305,7 @@ HDIO_SET_ADDRESS error return: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - EACCES Access denied: requires CAP_SYS_ADMIN - EINVAL value out of range [0 2] - EBUSY Controller busy @@ -1331,7 +1331,7 @@ HDIO_SET_IDE_SCSI error return: - - EINVAL (bdev != bdev->bd_contains) (not sure what this means) + - EINVAL Called on a partition instead of the whole disk device - EACCES Access denied: requires CAP_SYS_ADMIN - EINVAL value out of range [0 1] - EBUSY Controller busy diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 2a198838fca9..55a2d9b2ce33 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -328,8 +328,11 @@ Code Seq# Include File Comments 0xAC 00-1F linux/raw.h 0xAD 00 Netfilter device in development: <mailto:rusty@rustcorp.com.au> -0xAE all linux/kvm.h Kernel-based Virtual Machine +0xAE 00-1F linux/kvm.h Kernel-based Virtual Machine <mailto:kvm@vger.kernel.org> +0xAE 40-FF linux/kvm.h Kernel-based Virtual Machine + <mailto:kvm@vger.kernel.org> +0xAE 20-3F linux/nitro_enclaves.h Nitro Enclaves 0xAF 00-1F linux/fsl_hypervisor.h Freescale hypervisor 0xB0 all RATIO devices in development: <mailto:vgo@ratio.de> @@ -356,8 +359,6 @@ Code Seq# Include File Comments 0xEC 00-01 drivers/platform/chrome/cros_ec_dev.h ChromeOS EC driver 0xF3 00-3F drivers/usb/misc/sisusbvga/sisusb.h sisfb (in development) <mailto:thomas@winischhofer.net> -0xF4 00-1F video/mbxfb.h mbxfb - <mailto:raph@8d.com> 0xF6 all LTTng Linux Trace Toolkit Next Generation <mailto:mathieu.desnoyers@efficios.com> 0xFD all linux/dm-ioctl.h diff --git a/Documentation/userspace-api/iommu.rst b/Documentation/userspace-api/iommu.rst new file mode 100644 index 000000000000..d3108c1519d5 --- /dev/null +++ b/Documentation/userspace-api/iommu.rst @@ -0,0 +1,209 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. iommu: + +===================================== +IOMMU Userspace API +===================================== + +IOMMU UAPI is used for virtualization cases where communications are +needed between physical and virtual IOMMU drivers. For baremetal +usage, the IOMMU is a system device which does not need to communicate +with userspace directly. + +The primary use cases are guest Shared Virtual Address (SVA) and +guest IO virtual address (IOVA), wherein the vIOMMU implementation +relies on the physical IOMMU and for this reason requires interactions +with the host driver. + +.. contents:: :local: + +Functionalities +=============== +Communications of user and kernel involve both directions. The +supported user-kernel APIs are as follows: + +1. Bind/Unbind guest PASID (e.g. Intel VT-d) +2. Bind/Unbind guest PASID table (e.g. ARM SMMU) +3. Invalidate IOMMU caches upon guest requests +4. Report errors to the guest and serve page requests + +Requirements +============ +The IOMMU UAPIs are generic and extensible to meet the following +requirements: + +1. Emulated and para-virtualised vIOMMUs +2. Multiple vendors (Intel VT-d, ARM SMMU, etc.) +3. Extensions to the UAPI shall not break existing userspace + +Interfaces +========== +Although the data structures defined in IOMMU UAPI are self-contained, +there are no user API functions introduced. Instead, IOMMU UAPI is +designed to work with existing user driver frameworks such as VFIO. + +Extension Rules & Precautions +----------------------------- +When IOMMU UAPI gets extended, the data structures can *only* be +modified in two ways: + +1. Adding new fields by re-purposing the padding[] field. No size change. +2. Adding new union members at the end. May increase the structure sizes. + +No new fields can be added *after* the variable sized union in that it +will break backward compatibility when offset moves. A new flag must +be introduced whenever a change affects the structure using either +method. The IOMMU driver processes the data based on flags which +ensures backward compatibility. + +Version field is only reserved for the unlikely event of UAPI upgrade +at its entirety. + +It's *always* the caller's responsibility to indicate the size of the +structure passed by setting argsz appropriately. +Though at the same time, argsz is user provided data which is not +trusted. The argsz field allows the user app to indicate how much data +it is providing; it's still the kernel's responsibility to validate +whether it's correct and sufficient for the requested operation. + +Compatibility Checking +---------------------- +When IOMMU UAPI extension results in some structure size increase, +IOMMU UAPI code shall handle the following cases: + +1. User and kernel has exact size match +2. An older user with older kernel header (smaller UAPI size) running on a + newer kernel (larger UAPI size) +3. A newer user with newer kernel header (larger UAPI size) running + on an older kernel. +4. A malicious/misbehaving user passing illegal/invalid size but within + range. The data may contain garbage. + +Feature Checking +---------------- +While launching a guest with vIOMMU, it is strongly advised to check +the compatibility upfront, as some subsequent errors happening during +vIOMMU operation, such as cache invalidation failures cannot be nicely +escalated to the guest due to IOMMU specifications. This can lead to +catastrophic failures for the users. + +User applications such as QEMU are expected to import kernel UAPI +headers. Backward compatibility is supported per feature flags. +For example, an older QEMU (with older kernel header) can run on newer +kernel. Newer QEMU (with new kernel header) may refuse to initialize +on an older kernel if new feature flags are not supported by older +kernel. Simply recompiling existing code with newer kernel header should +not be an issue in that only existing flags are used. + +IOMMU vendor driver should report the below features to IOMMU UAPI +consumers (e.g. via VFIO). + +1. IOMMU_NESTING_FEAT_SYSWIDE_PASID +2. IOMMU_NESTING_FEAT_BIND_PGTBL +3. IOMMU_NESTING_FEAT_BIND_PASID_TABLE +4. IOMMU_NESTING_FEAT_CACHE_INVLD +5. IOMMU_NESTING_FEAT_PAGE_REQUEST + +Take VFIO as example, upon request from VFIO userspace (e.g. QEMU), +VFIO kernel code shall query IOMMU vendor driver for the support of +the above features. Query result can then be reported back to the +userspace caller. Details can be found in +Documentation/driver-api/vfio.rst. + + +Data Passing Example with VFIO +------------------------------ +As the ubiquitous userspace driver framework, VFIO is already IOMMU +aware and shares many key concepts such as device model, group, and +protection domain. Other user driver frameworks can also be extended +to support IOMMU UAPI but it is outside the scope of this document. + +In this tight-knit VFIO-IOMMU interface, the ultimate consumer of the +IOMMU UAPI data is the host IOMMU driver. VFIO facilitates user-kernel +transport, capability checking, security, and life cycle management of +process address space ID (PASID). + +VFIO layer conveys the data structures down to the IOMMU driver. It +follows the pattern below:: + + struct { + __u32 argsz; + __u32 flags; + __u8 data[]; + }; + +Here data[] contains the IOMMU UAPI data structures. VFIO has the +freedom to bundle the data as well as parse data size based on its own flags. + +In order to determine the size and feature set of the user data, argsz +and flags (or the equivalent) are also embedded in the IOMMU UAPI data +structures. + +A "__u32 argsz" field is *always* at the beginning of each structure. + +For example: +:: + + struct iommu_cache_invalidate_info { + __u32 argsz; + #define IOMMU_CACHE_INVALIDATE_INFO_VERSION_1 1 + __u32 version; + /* IOMMU paging structure cache */ + #define IOMMU_CACHE_INV_TYPE_IOTLB (1 << 0) /* IOMMU IOTLB */ + #define IOMMU_CACHE_INV_TYPE_DEV_IOTLB (1 << 1) /* Device IOTLB */ + #define IOMMU_CACHE_INV_TYPE_PASID (1 << 2) /* PASID cache */ + #define IOMMU_CACHE_INV_TYPE_NR (3) + __u8 cache; + __u8 granularity; + __u8 padding[6]; + union { + struct iommu_inv_pasid_info pasid_info; + struct iommu_inv_addr_info addr_info; + } granu; + }; + +VFIO is responsible for checking its own argsz and flags. It then +invokes appropriate IOMMU UAPI functions. The user pointers are passed +to the IOMMU layer for further processing. The responsibilities are +divided as follows: + +- Generic IOMMU layer checks argsz range based on UAPI data in the + current kernel version. + +- Generic IOMMU layer checks content of the UAPI data for non-zero + reserved bits in flags, padding fields, and unsupported version. + This is to ensure not breaking userspace in the future when these + fields or flags are used. + +- Vendor IOMMU driver checks argsz based on vendor flags. UAPI data + is consumed based on flags. Vendor driver has access to + unadulterated argsz value in case of vendor specific future + extensions. Currently, it does not perform the copy_from_user() + itself. A __user pointer can be provided in some future scenarios + where there's vendor data outside of the structure definition. + +IOMMU code treats UAPI data in two categories: + +- structure contains vendor data + (Example: iommu_uapi_cache_invalidate()) + +- structure contains only generic data + (Example: iommu_uapi_sva_bind_gpasid()) + + + +Sharing UAPI with in-kernel users +--------------------------------- +For UAPIs that are shared with in-kernel users, a wrapper function is +provided to distinguish the callers. For example, + +Userspace caller :: + + int iommu_uapi_sva_unbind_gpasid(struct iommu_domain *domain, + struct device *dev, + void __user *udata) + +In-kernel caller :: + + int iommu_sva_unbind_gpasid(struct iommu_domain *domain, + struct device *dev, ioasid_t ioasid); diff --git a/Documentation/userspace-api/media/cec/cec-api.rst b/Documentation/userspace-api/media/cec/cec-api.rst index 871db54dfd24..4d229ed8a1d9 100644 --- a/Documentation/userspace-api/media/cec/cec-api.rst +++ b/Documentation/userspace-api/media/cec/cec-api.rst @@ -1,12 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections - +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. include:: <isonum.txt> .. _cec: diff --git a/Documentation/userspace-api/media/cec/cec-func-close.rst b/Documentation/userspace-api/media/cec/cec-func-close.rst index b89e06a43dad..409e70a5f80f 100644 --- a/Documentation/userspace-api/media/cec/cec-func-close.rst +++ b/Documentation/userspace-api/media/cec/cec-func-close.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: CEC .. _cec-func-close: @@ -18,7 +12,6 @@ Name cec-close - Close a cec device - Synopsis ======== @@ -26,16 +19,13 @@ Synopsis #include <unistd.h> - .. c:function:: int close( int fd ) - :name: cec-close Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <cec-open>`. - + File descriptor returned by :c:func:`open()`. Description =========== @@ -43,11 +33,10 @@ Description Closes the cec device. Resources associated with the file descriptor are freed. The device configuration remain unchanged. - Return Value ============ -:c:func:`close() <cec-close>` returns 0 on success. On error, -1 is returned, and +:c:func:`close()` returns 0 on success. On error, -1 is returned, and ``errno`` is set appropriately. Possible error codes are: ``EBADF`` diff --git a/Documentation/userspace-api/media/cec/cec-func-ioctl.rst b/Documentation/userspace-api/media/cec/cec-func-ioctl.rst index d16a479aacb1..7c93f86de6cc 100644 --- a/Documentation/userspace-api/media/cec/cec-func-ioctl.rst +++ b/Documentation/userspace-api/media/cec/cec-func-ioctl.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: CEC .. _cec-func-ioctl: @@ -25,15 +19,13 @@ Synopsis #include <sys/ioctl.h> - -.. c:function:: int ioctl( int fd, int request, void *argp ) - :name: cec-ioctl +``int ioctl(int fd, int request, void *argp)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <cec-open>`. + File descriptor returned by :c:func:`open()`. ``request`` CEC ioctl request code as defined in the cec.h header file, for @@ -42,11 +34,10 @@ Arguments ``argp`` Pointer to a request-specific structure. - Description =========== -The :c:func:`ioctl() <cec-ioctl>` function manipulates cec device parameters. The +The :c:func:`ioctl()` function manipulates cec device parameters. The argument ``fd`` must be an open file descriptor. The ioctl ``request`` code specifies the cec function to be called. It @@ -58,7 +49,6 @@ their parameters are located in the cec.h header file. All cec ioctl requests, their respective function and parameters are specified in :ref:`cec-user-func`. - Return Value ============ diff --git a/Documentation/userspace-api/media/cec/cec-func-open.rst b/Documentation/userspace-api/media/cec/cec-func-open.rst index 67fd021556b2..d86563a34b9e 100644 --- a/Documentation/userspace-api/media/cec/cec-func-open.rst +++ b/Documentation/userspace-api/media/cec/cec-func-open.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: CEC .. _cec-func-open: @@ -25,10 +19,7 @@ Synopsis #include <fcntl.h> - .. c:function:: int open( const char *device_name, int flags ) - :name: cec-open - Arguments ========= @@ -49,11 +40,10 @@ Arguments Other flags have no effect. - Description =========== -To open a cec device applications call :c:func:`open() <cec-open>` with the +To open a cec device applications call :c:func:`open()` with the desired device name. The function has no side effects; the device configuration remain unchanged. @@ -61,11 +51,10 @@ When the device is opened in read-only mode, attempts to modify its configuration will result in an error, and ``errno`` will be set to EBADF. - Return Value ============ -:c:func:`open() <cec-open>` returns the new file descriptor on success. On error, +:c:func:`open()` returns the new file descriptor on success. On error, -1 is returned, and ``errno`` is set appropriately. Possible error codes include: diff --git a/Documentation/userspace-api/media/cec/cec-func-poll.rst b/Documentation/userspace-api/media/cec/cec-func-poll.rst index ed3652d9bf17..980bbfc0bcce 100644 --- a/Documentation/userspace-api/media/cec/cec-func-poll.rst +++ b/Documentation/userspace-api/media/cec/cec-func-poll.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: CEC .. _cec-func-poll: @@ -18,7 +12,6 @@ Name cec-poll - Wait for some event on a file descriptor - Synopsis ======== @@ -26,9 +19,7 @@ Synopsis #include <sys/poll.h> - .. c:function:: int poll( struct pollfd *ufds, unsigned int nfds, int timeout ) - :name: cec-poll Arguments ========= @@ -42,14 +33,13 @@ Arguments ``timeout`` Timeout to wait for events - Description =========== -With the :c:func:`poll() <cec-poll>` function applications can wait for CEC +With the :c:func:`poll()` function applications can wait for CEC events. -On success :c:func:`poll() <cec-poll>` returns the number of file descriptors +On success :c:func:`poll()` returns the number of file descriptors that have been selected (that is, file descriptors for which the ``revents`` field of the respective struct :c:type:`pollfd` is non-zero). CEC devices set the ``POLLIN`` and ``POLLRDNORM`` flags in @@ -60,13 +50,12 @@ then the ``POLLPRI`` flag is set. When the function times out it returns a value of zero, on failure it returns -1 and the ``errno`` variable is set appropriately. -For more details see the :c:func:`poll() <cec-poll>` manual page. - +For more details see the :c:func:`poll()` manual page. Return Value ============ -On success, :c:func:`poll() <cec-poll>` returns the number structures which have +On success, :c:func:`poll()` returns the number structures which have non-zero ``revents`` fields, or zero if the call timed out. On error -1 is returned, and the ``errno`` variable is set appropriately: diff --git a/Documentation/userspace-api/media/cec/cec-funcs.rst b/Documentation/userspace-api/media/cec/cec-funcs.rst index 88966b5175d2..aa6b790e8400 100644 --- a/Documentation/userspace-api/media/cec/cec-funcs.rst +++ b/Documentation/userspace-api/media/cec/cec-funcs.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _cec-user-func: diff --git a/Documentation/userspace-api/media/cec/cec-header.rst b/Documentation/userspace-api/media/cec/cec-header.rst index 24a83b0c35af..d70736ac2b1d 100644 --- a/Documentation/userspace-api/media/cec/cec-header.rst +++ b/Documentation/userspace-api/media/cec/cec-header.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _cec_header: diff --git a/Documentation/userspace-api/media/cec/cec-intro.rst b/Documentation/userspace-api/media/cec/cec-intro.rst index a4db82388202..1884ea090f12 100644 --- a/Documentation/userspace-api/media/cec/cec-intro.rst +++ b/Documentation/userspace-api/media/cec/cec-intro.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _cec-intro: diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst index 436a882dfa31..c7309a2fcbce 100644 --- a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst +++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: CEC .. _CEC_ADAP_G_CAPS: @@ -21,18 +15,18 @@ CEC_ADAP_G_CAPS - Query device capabilities Synopsis ======== -.. c:function:: int ioctl( int fd, CEC_ADAP_G_CAPS, struct cec_caps *argp ) - :name: CEC_ADAP_G_CAPS +.. c:macro:: CEC_ADAP_G_CAPS + +``int ioctl(int fd, CEC_ADAP_G_CAPS, struct cec_caps *argp)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <cec-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` - Description =========== @@ -69,7 +63,6 @@ returns the information to the application. The ioctl never fails. - CEC Framework API version, formatted with the ``KERNEL_VERSION()`` macro. - .. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}| .. _cec-capabilities: diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-conn-info.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-conn-info.rst index 6818ddf1495c..13116b0b5c17 100644 --- a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-conn-info.rst +++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-conn-info.rst @@ -2,6 +2,8 @@ .. .. Copyright 2019 Google LLC .. +.. c:namespace:: CEC + .. _CEC_ADAP_G_CONNECTOR_INFO: ******************************* @@ -16,18 +18,18 @@ CEC_ADAP_G_CONNECTOR_INFO - Query HDMI connector information Synopsis ======== -.. c:function:: int ioctl( int fd, CEC_ADAP_G_CONNECTOR_INFO, struct cec_connector_info *argp ) - :name: CEC_ADAP_G_CONNECTOR_INFO +.. c:macro:: CEC_ADAP_G_CONNECTOR_INFO + +``int ioctl(int fd, CEC_ADAP_G_CONNECTOR_INFO, struct cec_connector_info *argp)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <cec-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` - Description =========== @@ -57,7 +59,6 @@ is only available if the ``CEC_CAP_CONNECTOR_INFO`` capability is set. * - } - - .. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}| .. _connector-type: diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst index 8ba3511c88b8..c760c07b6b3f 100644 --- a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst +++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: CEC .. _CEC_ADAP_LOG_ADDRS: .. _CEC_ADAP_G_LOG_ADDRS: @@ -20,21 +14,22 @@ Name CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS - Get or set the logical addresses - Synopsis ======== -.. c:function:: int ioctl( int fd, CEC_ADAP_G_LOG_ADDRS, struct cec_log_addrs *argp ) - :name: CEC_ADAP_G_LOG_ADDRS +.. c:macro:: CEC_ADAP_G_LOG_ADDRS + +``int ioctl(int fd, CEC_ADAP_G_LOG_ADDRS, struct cec_log_addrs *argp)`` + +.. c:macro:: CEC_ADAP_S_LOG_ADDRS -.. c:function:: int ioctl( int fd, CEC_ADAP_S_LOG_ADDRS, struct cec_log_addrs *argp ) - :name: CEC_ADAP_S_LOG_ADDRS +``int ioctl(int fd, CEC_ADAP_S_LOG_ADDRS, struct cec_log_addrs *argp)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <cec-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`cec_log_addrs`. @@ -155,7 +150,6 @@ logical address types are already defined will return with error ``EBUSY``. give the CEC framework more information about the device type, even though the framework won't use it directly in the CEC message. - .. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}| .. _cec-log-addrs-flags: @@ -192,7 +186,6 @@ logical address types are already defined will return with error ``EBUSY``. All other messages are ignored. - .. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}| .. _cec-versions: @@ -218,7 +211,6 @@ logical address types are already defined will return with error ``EBUSY``. - 6 - CEC version according to the HDMI 2.0 standard. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _cec-prim-dev-types: @@ -264,7 +256,6 @@ logical address types are already defined will return with error ``EBUSY``. - 7 - Use for a video processor device. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _cec-log-addr-types: @@ -313,7 +304,6 @@ logical address types are already defined will return with error ``EBUSY``. Control). - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _cec-all-dev-types-flags: @@ -355,7 +345,6 @@ logical address types are already defined will return with error ``EBUSY``. - This supports the CEC Switch or Video Processing type. - Return Value ============ diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-phys-addr.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-phys-addr.rst index ce8f64c3e060..fb22f6894f26 100644 --- a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-phys-addr.rst +++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-phys-addr.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: CEC .. _CEC_ADAP_PHYS_ADDR: .. _CEC_ADAP_G_PHYS_ADDR: @@ -20,21 +14,22 @@ Name CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR - Get or set the physical address - Synopsis ======== -.. c:function:: int ioctl( int fd, CEC_ADAP_G_PHYS_ADDR, __u16 *argp ) - :name: CEC_ADAP_G_PHYS_ADDR +.. c:macro:: CEC_ADAP_G_PHYS_ADDR + +``int ioctl(int fd, CEC_ADAP_G_PHYS_ADDR, __u16 *argp)`` -.. c:function:: int ioctl( int fd, CEC_ADAP_S_PHYS_ADDR, __u16 *argp ) - :name: CEC_ADAP_S_PHYS_ADDR +.. c:macro:: CEC_ADAP_S_PHYS_ADDR + +``int ioctl(int fd, CEC_ADAP_S_PHYS_ADDR, __u16 *argp)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <cec-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to the CEC address. @@ -78,7 +73,6 @@ For example, the EDID for each HDMI input of the TV will have a different physical address of the form a.0.0.0 that the sources will read out and use as their physical address. - Return Value ============ diff --git a/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst b/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst index 4a535fb64b4b..736fda5ad73d 100644 --- a/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst +++ b/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: CEC .. _CEC_DQEVENT: @@ -18,22 +12,21 @@ Name CEC_DQEVENT - Dequeue a CEC event - Synopsis ======== -.. c:function:: int ioctl( int fd, CEC_DQEVENT, struct cec_event *argp ) - :name: CEC_DQEVENT +.. c:macro:: CEC_DQEVENT + +``int ioctl(int fd, CEC_DQEVENT, struct cec_event *argp)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <cec-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` - Description =========== @@ -79,7 +72,6 @@ it is guaranteed that the state did change in between the two events. the HDMI driver is still configuring the device or because the HDMI device was unbound. - .. c:type:: cec_event_lost_msgs .. tabularcolumns:: |p{1.0cm}|p{2.0cm}|p{14.5cm}| @@ -101,7 +93,6 @@ it is guaranteed that the state did change in between the two events. replied to within a second according to the CEC specification, this is more than enough. - .. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}| .. c:type:: cec_event @@ -137,7 +128,6 @@ it is guaranteed that the state did change in between the two events. * - } - - .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}| .. _cec-events: @@ -211,7 +201,6 @@ it is guaranteed that the state did change in between the two events. if the 5V is high, then an initial event will be generated for that filehandle. - .. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}| .. _cec-event-flags: @@ -237,7 +226,6 @@ it is guaranteed that the state did change in between the two events. This is an indication that the application cannot keep up. - Return Value ============ diff --git a/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst b/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst index 2d3227e80b4f..d3387b1fa7c5 100644 --- a/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst +++ b/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: CEC .. _CEC_MODE: .. _CEC_G_MODE: @@ -20,17 +14,19 @@ CEC_G_MODE, CEC_S_MODE - Get or set exclusive use of the CEC adapter Synopsis ======== -.. c:function:: int ioctl( int fd, CEC_G_MODE, __u32 *argp ) - :name: CEC_G_MODE +.. c:macro:: CEC_G_MODE -.. c:function:: int ioctl( int fd, CEC_S_MODE, __u32 *argp ) - :name: CEC_S_MODE +``int ioctl(int fd, CEC_G_MODE, __u32 *argp)`` + +.. c:macro:: CEC_S_MODE + +``int ioctl(int fd, CEC_S_MODE, __u32 *argp)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <cec-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to CEC mode. @@ -108,7 +104,6 @@ Available initiator modes are: then an attempt to become one will return the ``EBUSY`` error code error. - Available follower modes are: .. tabularcolumns:: |p{6.6cm}|p{0.9cm}|p{10.0cm}| @@ -200,7 +195,6 @@ Available follower modes are: the process has the ``CAP_NET_ADMIN`` capability. If that is not set, then the ``EPERM`` error code is returned. - Core message processing details: .. tabularcolumns:: |p{6.6cm}|p{10.9cm}| @@ -279,7 +273,6 @@ Core message processing details: and then just pass the message on to the follower(s). - Return Value ============ diff --git a/Documentation/userspace-api/media/cec/cec-ioc-receive.rst b/Documentation/userspace-api/media/cec/cec-ioc-receive.rst index e456b2bc92a1..b2fc051e99f4 100644 --- a/Documentation/userspace-api/media/cec/cec-ioc-receive.rst +++ b/Documentation/userspace-api/media/cec/cec-ioc-receive.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: CEC .. _CEC_TRANSMIT: .. _CEC_RECEIVE: @@ -19,21 +13,22 @@ Name CEC_RECEIVE, CEC_TRANSMIT - Receive or transmit a CEC message - Synopsis ======== -.. c:function:: int ioctl( int fd, CEC_RECEIVE, struct cec_msg \*argp ) - :name: CEC_RECEIVE +.. c:macro:: CEC_RECEIVE + +``int ioctl(int fd, CEC_RECEIVE, struct cec_msg *argp)`` -.. c:function:: int ioctl( int fd, CEC_TRANSMIT, struct cec_msg \*argp ) - :name: CEC_TRANSMIT +.. c:macro:: CEC_TRANSMIT + +``int ioctl(int fd, CEC_TRANSMIT, struct cec_msg *argp)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <cec-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct cec_msg. @@ -201,7 +196,6 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). supports this, otherwise it is always 0. This counter is only valid if the :ref:`CEC_TX_STATUS_ERROR <CEC-TX-STATUS-ERROR>` status bit is set. - .. tabularcolumns:: |p{6.2cm}|p{1.0cm}|p{10.3cm}| .. _cec-msg-flags: @@ -235,7 +229,6 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). capability. If that is not set, then the ``EPERM`` error code is returned. - .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}| .. _cec-tx-status: @@ -305,7 +298,6 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). - The transmit timed out. This should not normally happen and this indicates a driver problem. - .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}| .. _cec-rx-status: @@ -342,7 +334,6 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). reply was interrupted. - Return Value ============ diff --git a/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst b/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst index 78632199324d..064c8c5a1943 100644 --- a/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst +++ b/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later CEC Pin Framework Error Injection ================================= diff --git a/Documentation/userspace-api/media/dvb/audio-bilingual-channel-select.rst b/Documentation/userspace-api/media/dvb/audio-bilingual-channel-select.rst index 6841233f3fee..33b5363317f1 100644 --- a/Documentation/userspace-api/media/dvb/audio-bilingual-channel-select.rst +++ b/Documentation/userspace-api/media/dvb/audio-bilingual-channel-select.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_BILINGUAL_CHANNEL_SELECT: @@ -23,9 +17,9 @@ AUDIO_BILINGUAL_CHANNEL_SELECT Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_BILINGUAL_CHANNEL_SELECT, struct *audio_channel_select) - :name: AUDIO_BILINGUAL_CHANNEL_SELECT +.. c:macro:: AUDIO_BILINGUAL_CHANNEL_SELECT +``int ioctl(int fd, AUDIO_BILINGUAL_CHANNEL_SELECT, struct audio_channel_select *select)`` Arguments --------- @@ -46,7 +40,6 @@ Arguments - Select the output format of the audio (mono left/right, stereo). - Description ----------- @@ -57,7 +50,6 @@ for MPEG decoders controlled through V4L2. This ioctl call asks the Audio Device to select the requested channel for bilingual streams if possible. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-channel-select.rst b/Documentation/userspace-api/media/dvb/audio-channel-select.rst index 18e880e7eab4..74093df92a68 100644 --- a/Documentation/userspace-api/media/dvb/audio-channel-select.rst +++ b/Documentation/userspace-api/media/dvb/audio-channel-select.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_CHANNEL_SELECT: @@ -23,9 +17,9 @@ AUDIO_CHANNEL_SELECT Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_CHANNEL_SELECT, struct *audio_channel_select) - :name: AUDIO_CHANNEL_SELECT +.. c:macro:: AUDIO_CHANNEL_SELECT +``int ioctl(int fd, AUDIO_CHANNEL_SELECT, struct audio_channel_select *select)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - - int fd @@ -47,7 +40,6 @@ Arguments - Select the output format of the audio (mono left/right, stereo). - Description ----------- @@ -57,7 +49,6 @@ V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` control instead. This ioctl call asks the Audio Device to select the requested channel if possible. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-clear-buffer.rst b/Documentation/userspace-api/media/dvb/audio-clear-buffer.rst index 19f2ed752ce2..a0ebb0278260 100644 --- a/Documentation/userspace-api/media/dvb/audio-clear-buffer.rst +++ b/Documentation/userspace-api/media/dvb/audio-clear-buffer.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_CLEAR_BUFFER: @@ -23,8 +17,9 @@ AUDIO_CLEAR_BUFFER Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_CLEAR_BUFFER) - :name: AUDIO_CLEAR_BUFFER +.. c:macro:: AUDIO_CLEAR_BUFFER + +``int ioctl(int fd, AUDIO_CLEAR_BUFFER)`` Arguments --------- @@ -33,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -46,7 +40,6 @@ Description This ioctl call asks the Audio Device to clear all software and hardware buffers of the audio decoder device. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-continue.rst b/Documentation/userspace-api/media/dvb/audio-continue.rst index b9a2b1e608b6..a2e9850f37f2 100644 --- a/Documentation/userspace-api/media/dvb/audio-continue.rst +++ b/Documentation/userspace-api/media/dvb/audio-continue.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_CONTINUE: @@ -23,9 +17,9 @@ AUDIO_CONTINUE Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_CONTINUE) - :name: AUDIO_CONTINUE +.. c:macro:: AUDIO_CONTINUE +``int ioctl(int fd, AUDIO_CONTINUE)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -47,7 +40,6 @@ Description This ioctl restarts the decoding and playing process previously paused with AUDIO_PAUSE command. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-fclose.rst b/Documentation/userspace-api/media/dvb/audio-fclose.rst index 448471d2f570..77857d578e83 100644 --- a/Documentation/userspace-api/media/dvb/audio-fclose.rst +++ b/Documentation/userspace-api/media/dvb/audio-fclose.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _audio_fclose: @@ -24,8 +18,6 @@ Synopsis -------- .. c:function:: int close(int fd) - :name: dvb-audio-close - Arguments --------- @@ -34,20 +26,17 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd - File descriptor returned by a previous call to open(). - Description ----------- This system call closes a previously opened audio device. - Return Value ------------ @@ -55,7 +44,6 @@ Return Value :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EBADF`` diff --git a/Documentation/userspace-api/media/dvb/audio-fopen.rst b/Documentation/userspace-api/media/dvb/audio-fopen.rst index f7ae94378f92..774daaab3bad 100644 --- a/Documentation/userspace-api/media/dvb/audio-fopen.rst +++ b/Documentation/userspace-api/media/dvb/audio-fopen.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _audio_fopen: @@ -24,8 +18,6 @@ Synopsis -------- .. c:function:: int open(const char *deviceName, int flags) - :name: dvb-audio-open - Arguments --------- @@ -34,7 +26,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - const char \*deviceName @@ -67,7 +58,6 @@ Arguments - - (blocking mode is the default) - Description ----------- @@ -85,7 +75,6 @@ fail, and an error code will be returned. If the Audio Device is opened in O_RDONLY mode, the only ioctl call that can be used is AUDIO_GET_STATUS. All other call will return with an error code. - Return Value ------------ @@ -95,7 +84,6 @@ Return Value :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``ENODEV`` diff --git a/Documentation/userspace-api/media/dvb/audio-fwrite.rst b/Documentation/userspace-api/media/dvb/audio-fwrite.rst index 1482636f9b1a..7b096ac2b6c4 100644 --- a/Documentation/userspace-api/media/dvb/audio-fwrite.rst +++ b/Documentation/userspace-api/media/dvb/audio-fwrite.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _audio_fwrite: @@ -24,8 +18,6 @@ Synopsis -------- .. c:function:: size_t write(int fd, const void *buf, size_t count) - :name: dvb-audio-write - Arguments --------- @@ -34,7 +26,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +44,6 @@ Arguments - Size of buf. - Description ----------- @@ -63,7 +53,6 @@ PES format. If O_NONBLOCK is not specified the function will block until buffer space is available. The amount of data to be transferred is implied by count. - Return Value ------------ @@ -71,7 +60,6 @@ Return Value :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EPERM`` diff --git a/Documentation/userspace-api/media/dvb/audio-get-capabilities.rst b/Documentation/userspace-api/media/dvb/audio-get-capabilities.rst index 4e70d82969ad..6d9eb71dad17 100644 --- a/Documentation/userspace-api/media/dvb/audio-get-capabilities.rst +++ b/Documentation/userspace-api/media/dvb/audio-get-capabilities.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_GET_CAPABILITIES: @@ -23,9 +17,9 @@ AUDIO_GET_CAPABILITIES Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_GET_CAPABILITIES, unsigned int *cap) - :name: AUDIO_GET_CAPABILITIES +.. c:macro:: AUDIO_GET_CAPABILITIES +``int ioctl(int fd, AUDIO_GET_CAPABILITIES, unsigned int *cap)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - - int fd @@ -47,14 +40,12 @@ Arguments - Returns a bit array of supported sound formats. - Description ----------- This ioctl call asks the Audio Device to tell us about the decoding capabilities of the audio hardware. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-get-status.rst b/Documentation/userspace-api/media/dvb/audio-get-status.rst index 5a5180d642d4..7ae8db2e65e9 100644 --- a/Documentation/userspace-api/media/dvb/audio-get-status.rst +++ b/Documentation/userspace-api/media/dvb/audio-get-status.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_GET_STATUS: @@ -23,9 +17,9 @@ AUDIO_GET_STATUS Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_GET_STATUS, struct audio_status *status) - :name: AUDIO_GET_STATUS +.. c:macro:: AUDIO_GET_STATUS +``int ioctl(int fd, AUDIO_GET_STATUS, struct audio_status *status)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - - int fd @@ -47,14 +40,12 @@ Arguments - Returns the current state of Audio Device. - Description ----------- This ioctl call asks the Audio Device to return the current state of the Audio Device. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-pause.rst b/Documentation/userspace-api/media/dvb/audio-pause.rst index 3e9fe06d3a0f..d37d1ddce4df 100644 --- a/Documentation/userspace-api/media/dvb/audio-pause.rst +++ b/Documentation/userspace-api/media/dvb/audio-pause.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_PAUSE: @@ -23,8 +17,9 @@ AUDIO_PAUSE Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_PAUSE) - :name: AUDIO_PAUSE +.. c:macro:: AUDIO_PAUSE + +``int ioctl(int fd, AUDIO_PAUSE)`` Arguments --------- @@ -33,14 +28,12 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd - File descriptor returned by a previous call to open(). - Description ----------- @@ -48,7 +41,6 @@ This ioctl call suspends the audio stream being played. Decoding and playing are paused. It is then possible to restart again decoding and playing process of the audio stream using AUDIO_CONTINUE command. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-play.rst b/Documentation/userspace-api/media/dvb/audio-play.rst index 388a581a19f2..e591930b6ca7 100644 --- a/Documentation/userspace-api/media/dvb/audio-play.rst +++ b/Documentation/userspace-api/media/dvb/audio-play.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_PLAY: @@ -23,9 +17,9 @@ AUDIO_PLAY Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_PLAY) - :name: AUDIO_PLAY +.. c:macro:: AUDIO_PLAY +``int ioctl(int fd, AUDIO_PLAY)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -47,7 +40,6 @@ Description This ioctl call asks the Audio Device to start playing an audio stream from the selected source. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-select-source.rst b/Documentation/userspace-api/media/dvb/audio-select-source.rst index 1ce64507de93..6a0c0f365eb1 100644 --- a/Documentation/userspace-api/media/dvb/audio-select-source.rst +++ b/Documentation/userspace-api/media/dvb/audio-select-source.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_SELECT_SOURCE: @@ -23,9 +17,9 @@ AUDIO_SELECT_SOURCE Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_SELECT_SOURCE, struct audio_stream_source *source) - :name: AUDIO_SELECT_SOURCE +.. c:macro:: AUDIO_SELECT_SOURCE +``int ioctl(int fd, AUDIO_SELECT_SOURCE, struct audio_stream_source *source)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - - int fd @@ -47,7 +40,6 @@ Arguments - Indicates the source that shall be used for the Audio stream. - Description ----------- @@ -56,7 +48,6 @@ the input data. The possible sources are demux or memory. If AUDIO_SOURCE_MEMORY is selected, the data is fed to the Audio Device through the write command. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-set-av-sync.rst b/Documentation/userspace-api/media/dvb/audio-set-av-sync.rst index 3a0400dcfae4..85a8016bf025 100644 --- a/Documentation/userspace-api/media/dvb/audio-set-av-sync.rst +++ b/Documentation/userspace-api/media/dvb/audio-set-av-sync.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_SET_AV_SYNC: @@ -23,9 +17,9 @@ AUDIO_SET_AV_SYNC Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_SET_AV_SYNC, boolean state) - :name: AUDIO_SET_AV_SYNC +.. c:macro:: AUDIO_SET_AV_SYNC +``int ioctl(int fd, AUDIO_SET_AV_SYNC, boolean state)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - - int fd @@ -51,14 +44,12 @@ Arguments FALSE: AV-sync OFF - Description ----------- This ioctl call asks the Audio Device to turn ON or OFF A/V synchronization. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst b/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst index 0d2f23cc2f16..ecac02f1b2fc 100644 --- a/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst +++ b/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_SET_BYPASS_MODE: @@ -23,8 +17,9 @@ AUDIO_SET_BYPASS_MODE Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_SET_BYPASS_MODE, boolean mode) - :name: AUDIO_SET_BYPASS_MODE +.. c:macro:: AUDIO_SET_BYPASS_MODE + +``int ioctl(int fd, AUDIO_SET_BYPASS_MODE, boolean mode)`` Arguments --------- @@ -33,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - - int fd @@ -51,7 +45,6 @@ Arguments FALSE: Bypass is enabled - Description ----------- @@ -61,7 +54,6 @@ that can’t be handled by the Digital TV system shall be decoded. Dolby DigitalTM streams are automatically forwarded by the Digital TV subsystem if the hardware can handle it. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-set-id.rst b/Documentation/userspace-api/media/dvb/audio-set-id.rst index 83fc1217fda0..39ad846d412d 100644 --- a/Documentation/userspace-api/media/dvb/audio-set-id.rst +++ b/Documentation/userspace-api/media/dvb/audio-set-id.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_SET_ID: @@ -23,8 +17,9 @@ AUDIO_SET_ID Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_SET_ID, int id) - :name: AUDIO_SET_ID +.. c:macro:: AUDIO_SET_ID + +``int ioctl(int fd, AUDIO_SET_ID, int id)`` Arguments --------- @@ -33,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - - int fd @@ -46,7 +40,6 @@ Arguments - audio sub-stream id - Description ----------- @@ -58,7 +51,6 @@ other stream types. If the stream type is set the id just specifies the substream id of the audio stream and only the first 5 bits are recognized. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-set-mixer.rst b/Documentation/userspace-api/media/dvb/audio-set-mixer.rst index 52bfc3af79dc..45dbdf4801e0 100644 --- a/Documentation/userspace-api/media/dvb/audio-set-mixer.rst +++ b/Documentation/userspace-api/media/dvb/audio-set-mixer.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_SET_MIXER: @@ -23,8 +17,9 @@ AUDIO_SET_MIXER Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_SET_MIXER, struct audio_mixer *mix) - :name: AUDIO_SET_MIXER +.. c:macro:: AUDIO_SET_MIXER + +``int ioctl(int fd, AUDIO_SET_MIXER, struct audio_mixer *mix)`` Arguments --------- @@ -33,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - - int fd @@ -46,13 +40,11 @@ Arguments - mixer settings. - Description ----------- This ioctl lets you adjust the mixer settings of the audio decoder. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-set-mute.rst b/Documentation/userspace-api/media/dvb/audio-set-mute.rst index 8f3a8332cebc..987751f92967 100644 --- a/Documentation/userspace-api/media/dvb/audio-set-mute.rst +++ b/Documentation/userspace-api/media/dvb/audio-set-mute.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_SET_MUTE: @@ -23,9 +17,9 @@ AUDIO_SET_MUTE Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_SET_MUTE, boolean state) - :name: AUDIO_SET_MUTE +.. c:macro:: AUDIO_SET_MUTE +``int ioctl(int fd, AUDIO_SET_MUTE, boolean state)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - - int fd @@ -51,7 +44,6 @@ Arguments FALSE: Audio Un-mute - Description ----------- @@ -62,7 +54,6 @@ V4L2 :ref:`VIDIOC_DECODER_CMD` with the This ioctl call asks the audio device to mute the stream that is currently being played. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio-set-streamtype.rst b/Documentation/userspace-api/media/dvb/audio-set-streamtype.rst index c22bd247f03d..77d73c74882f 100644 --- a/Documentation/userspace-api/media/dvb/audio-set-streamtype.rst +++ b/Documentation/userspace-api/media/dvb/audio-set-streamtype.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_SET_STREAMTYPE: @@ -23,9 +17,9 @@ AUDIO_SET_STREAMTYPE Synopsis -------- -.. c:function:: int ioctl(fd, AUDIO_SET_STREAMTYPE, int type) - :name: AUDIO_SET_STREAMTYPE +.. c:macro:: AUDIO_SET_STREAMTYPE +``int ioctl(fd, AUDIO_SET_STREAMTYPE, int type)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - - int fd @@ -47,7 +40,6 @@ Arguments - stream type - Description ----------- @@ -55,7 +47,6 @@ This ioctl tells the driver which kind of audio stream to expect. This is useful if the stream offers several audio sub-streams like LPCM and AC3. - Return Value ------------ @@ -64,12 +55,10 @@ appropriately. The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. - .. flat-table:: :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EINVAL`` diff --git a/Documentation/userspace-api/media/dvb/audio-stop.rst b/Documentation/userspace-api/media/dvb/audio-stop.rst index 291b6a42efac..d77f786fd797 100644 --- a/Documentation/userspace-api/media/dvb/audio-stop.rst +++ b/Documentation/userspace-api/media/dvb/audio-stop.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.audio .. _AUDIO_STOP: @@ -23,8 +17,9 @@ AUDIO_STOP Synopsis -------- -.. c:function:: int ioctl(int fd, AUDIO_STOP) - :name: AUDIO_STOP +.. c:macro:: AUDIO_STOP + +``int ioctl(int fd, AUDIO_STOP)`` Arguments --------- @@ -33,21 +28,18 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd - File descriptor returned by a previous call to open(). - Description ----------- This ioctl call asks the Audio Device to stop playing the current stream. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/audio.rst b/Documentation/userspace-api/media/dvb/audio.rst index e137c151335d..071abac9d52d 100644 --- a/Documentation/userspace-api/media/dvb/audio.rst +++ b/Documentation/userspace-api/media/dvb/audio.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dvb_audio: diff --git a/Documentation/userspace-api/media/dvb/audio_data_types.rst b/Documentation/userspace-api/media/dvb/audio_data_types.rst index effe265b12d5..4744529136a8 100644 --- a/Documentation/userspace-api/media/dvb/audio_data_types.rst +++ b/Documentation/userspace-api/media/dvb/audio_data_types.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _audio_data_types: diff --git a/Documentation/userspace-api/media/dvb/audio_function_calls.rst b/Documentation/userspace-api/media/dvb/audio_function_calls.rst index be90a828fe29..fa5ba9539caf 100644 --- a/Documentation/userspace-api/media/dvb/audio_function_calls.rst +++ b/Documentation/userspace-api/media/dvb/audio_function_calls.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _audio_function_calls: diff --git a/Documentation/userspace-api/media/dvb/ca-fclose.rst b/Documentation/userspace-api/media/dvb/ca-fclose.rst index cedfb7ee6a01..27f217a350e7 100644 --- a/Documentation/userspace-api/media/dvb/ca-fclose.rst +++ b/Documentation/userspace-api/media/dvb/ca-fclose.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.ca .. _ca_fclose: @@ -18,26 +12,22 @@ Name Digital TV CA close() - Synopsis -------- .. c:function:: int close(int fd) - :name: dvb-ca-close - Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`. + File descriptor returned by a previous call to :c:func:`open()`. Description ----------- This system call closes a previously opened CA device. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/ca-fopen.rst b/Documentation/userspace-api/media/dvb/ca-fopen.rst index aa0fde1739a8..7f99908fff2c 100644 --- a/Documentation/userspace-api/media/dvb/ca-fopen.rst +++ b/Documentation/userspace-api/media/dvb/ca-fopen.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.ca .. _ca_fopen: @@ -18,13 +12,10 @@ Name Digital TV CA open() - Synopsis -------- .. c:function:: int open(const char *name, int flags) - :name: dvb-ca-open - Arguments --------- @@ -52,7 +43,6 @@ Arguments - open in non-blocking mode (blocking mode is the default) - Description ----------- @@ -70,11 +60,9 @@ Only one user can open the CA Device in ``O_RDWR`` mode. All other attempts to open the device in this mode will fail, and an error code will be returned. - Return Value ------------ - On success 0 is returned. On error -1 is returned, and the ``errno`` variable is set diff --git a/Documentation/userspace-api/media/dvb/ca-get-cap.rst b/Documentation/userspace-api/media/dvb/ca-get-cap.rst index b808d0592371..9b29513eeda8 100644 --- a/Documentation/userspace-api/media/dvb/ca-get-cap.rst +++ b/Documentation/userspace-api/media/dvb/ca-get-cap.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.ca .. _CA_GET_CAP: @@ -18,19 +12,18 @@ Name CA_GET_CAP - Synopsis -------- -.. c:function:: int ioctl(fd, CA_GET_CAP, struct ca_caps *caps) - :name: CA_GET_CAP +.. c:macro:: CA_GET_CAP +``int ioctl(fd, CA_GET_CAP, struct ca_caps *caps)`` Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`. + File descriptor returned by a previous call to :c:func:`open()`. ``caps`` Pointer to struct :c:type:`ca_caps`. diff --git a/Documentation/userspace-api/media/dvb/ca-get-descr-info.rst b/Documentation/userspace-api/media/dvb/ca-get-descr-info.rst index 396cc66a8243..0cfdcdab33a8 100644 --- a/Documentation/userspace-api/media/dvb/ca-get-descr-info.rst +++ b/Documentation/userspace-api/media/dvb/ca-get-descr-info.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.ca .. _CA_GET_DESCR_INFO: @@ -18,18 +12,18 @@ Name CA_GET_DESCR_INFO - Synopsis -------- -.. c:function:: int ioctl(fd, CA_GET_DESCR_INFO, struct ca_descr_info *desc) - :name: CA_GET_DESCR_INFO +.. c:macro:: CA_GET_DESCR_INFO + +``int ioctl(fd, CA_GET_DESCR_INFO, struct ca_descr_info *desc)`` Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`. + File descriptor returned by a previous call to :c:func:`open()`. ``desc`` Pointer to struct :c:type:`ca_descr_info`. diff --git a/Documentation/userspace-api/media/dvb/ca-get-msg.rst b/Documentation/userspace-api/media/dvb/ca-get-msg.rst index 995f461d6879..7c9a8d197343 100644 --- a/Documentation/userspace-api/media/dvb/ca-get-msg.rst +++ b/Documentation/userspace-api/media/dvb/ca-get-msg.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.ca .. _CA_GET_MSG: @@ -18,19 +12,18 @@ Name CA_GET_MSG - Synopsis -------- -.. c:function:: int ioctl(fd, CA_GET_MSG, struct ca_msg *msg) - :name: CA_GET_MSG +.. c:macro:: CA_GET_MSG +``int ioctl(fd, CA_GET_MSG, struct ca_msg *msg)`` Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`. + File descriptor returned by a previous call to :c:func:`open()`. ``msg`` Pointer to struct :c:type:`ca_msg`. @@ -45,11 +38,9 @@ Receives a message via a CI CA module. Please notice that, on most drivers, this is done by reading from the /dev/adapter?/ca? device node. - Return Value ------------ - On success 0 is returned. On error -1 is returned, and the ``errno`` variable is set diff --git a/Documentation/userspace-api/media/dvb/ca-get-slot-info.rst b/Documentation/userspace-api/media/dvb/ca-get-slot-info.rst index c65987ff9cb3..582444af7003 100644 --- a/Documentation/userspace-api/media/dvb/ca-get-slot-info.rst +++ b/Documentation/userspace-api/media/dvb/ca-get-slot-info.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.ca .. _CA_GET_SLOT_INFO: @@ -18,19 +12,18 @@ Name CA_GET_SLOT_INFO - Synopsis -------- -.. c:function:: int ioctl(fd, CA_GET_SLOT_INFO, struct ca_slot_info *info) - :name: CA_GET_SLOT_INFO +.. c:macro:: CA_GET_SLOT_INFO +``int ioctl(fd, CA_GET_SLOT_INFO, struct ca_slot_info *info)`` Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() <cec-open>`. + File descriptor returned by a previous call to :c:func:`open()`. ``info`` Pointer to struct :c:type:`ca_slot_info`. @@ -41,7 +34,6 @@ Description Returns information about a CA slot identified by :c:type:`ca_slot_info`.slot_num. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/ca-reset.rst b/Documentation/userspace-api/media/dvb/ca-reset.rst index 116a5a8eeb5d..b01ca48f0b50 100644 --- a/Documentation/userspace-api/media/dvb/ca-reset.rst +++ b/Documentation/userspace-api/media/dvb/ca-reset.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.ca .. _CA_RESET: @@ -18,19 +12,18 @@ Name CA_RESET - Synopsis -------- -.. c:function:: int ioctl(fd, CA_RESET) - :name: CA_RESET +.. c:macro:: CA_RESET +``int ioctl(fd, CA_RESET)`` Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() <cec-open>`. + File descriptor returned by a previous call to :c:func:`open()`. Description ----------- @@ -38,7 +31,6 @@ Description Puts the Conditional Access hardware on its initial state. It should be called before start using the CA hardware. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/ca-send-msg.rst b/Documentation/userspace-api/media/dvb/ca-send-msg.rst index 716d88e0fdc5..7dd2ab4ef675 100644 --- a/Documentation/userspace-api/media/dvb/ca-send-msg.rst +++ b/Documentation/userspace-api/media/dvb/ca-send-msg.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.ca .. _CA_SEND_MSG: @@ -18,24 +12,22 @@ Name CA_SEND_MSG - Synopsis -------- -.. c:function:: int ioctl(fd, CA_SEND_MSG, struct ca_msg *msg) - :name: CA_SEND_MSG +.. c:macro:: CA_SEND_MSG +``int ioctl(fd, CA_SEND_MSG, struct ca_msg *msg)`` Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() <cec-open>`. + File descriptor returned by a previous call to :c:func:`open()`. ``msg`` Pointer to struct :c:type:`ca_msg`. - Description ----------- diff --git a/Documentation/userspace-api/media/dvb/ca-set-descr.rst b/Documentation/userspace-api/media/dvb/ca-set-descr.rst index 2c57371675e2..a740af34c872 100644 --- a/Documentation/userspace-api/media/dvb/ca-set-descr.rst +++ b/Documentation/userspace-api/media/dvb/ca-set-descr.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.ca .. _CA_SET_DESCR: @@ -18,19 +12,18 @@ Name CA_SET_DESCR - Synopsis -------- -.. c:function:: int ioctl(fd, CA_SET_DESCR, struct ca_descr *desc) - :name: CA_SET_DESCR +.. c:macro:: CA_SET_DESCR +``int ioctl(fd, CA_SET_DESCR, struct ca_descr *desc)`` Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() <cec-open>`. + File descriptor returned by a previous call to :c:func:`open()`. ``msg`` Pointer to struct :c:type:`ca_descr`. diff --git a/Documentation/userspace-api/media/dvb/ca.rst b/Documentation/userspace-api/media/dvb/ca.rst index 643b7c414943..6f6821e322a9 100644 --- a/Documentation/userspace-api/media/dvb/ca.rst +++ b/Documentation/userspace-api/media/dvb/ca.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dvb_ca: diff --git a/Documentation/userspace-api/media/dvb/ca_data_types.rst b/Documentation/userspace-api/media/dvb/ca_data_types.rst index 20e2b552144f..54ea2a987546 100644 --- a/Documentation/userspace-api/media/dvb/ca_data_types.rst +++ b/Documentation/userspace-api/media/dvb/ca_data_types.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _ca_data_types: diff --git a/Documentation/userspace-api/media/dvb/ca_function_calls.rst b/Documentation/userspace-api/media/dvb/ca_function_calls.rst index b8aceb1895b6..3b893fbd502d 100644 --- a/Documentation/userspace-api/media/dvb/ca_function_calls.rst +++ b/Documentation/userspace-api/media/dvb/ca_function_calls.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _ca_function_calls: diff --git a/Documentation/userspace-api/media/dvb/demux.rst b/Documentation/userspace-api/media/dvb/demux.rst index 00397b075e0f..364ef48472ee 100644 --- a/Documentation/userspace-api/media/dvb/demux.rst +++ b/Documentation/userspace-api/media/dvb/demux.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dvb_demux: diff --git a/Documentation/userspace-api/media/dvb/dmx-add-pid.rst b/Documentation/userspace-api/media/dvb/dmx-add-pid.rst index e309cd56fdf0..ea0c7dd91e05 100644 --- a/Documentation/userspace-api/media/dvb/dmx-add-pid.rst +++ b/Documentation/userspace-api/media/dvb/dmx-add-pid.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_ADD_PID: @@ -18,24 +12,22 @@ Name DMX_ADD_PID - Synopsis -------- -.. c:function:: int ioctl(fd, DMX_ADD_PID, __u16 *pid) - :name: DMX_ADD_PID +.. c:macro:: DMX_ADD_PID +``int ioctl(fd, DMX_ADD_PID, __u16 *pid)`` Arguments --------- ``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. + File descriptor returned by :c:func:`open()`. ``pid`` PID number to be filtered. - Description ----------- @@ -43,7 +35,6 @@ This ioctl call allows to add multiple PIDs to a transport stream filter previously set up with :ref:`DMX_SET_PES_FILTER` and output equal to :c:type:`DMX_OUT_TSDEMUX_TAP <dmx_output>`. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/dmx-expbuf.rst b/Documentation/userspace-api/media/dvb/dmx-expbuf.rst index f76db8ce3cfa..5cdc2035e3b7 100644 --- a/Documentation/userspace-api/media/dvb/dmx-expbuf.rst +++ b/Documentation/userspace-api/media/dvb/dmx-expbuf.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_EXPBUF: @@ -20,24 +14,22 @@ DMX_EXPBUF - Export a buffer as a DMABUF file descriptor. .. warning:: this API is still experimental - Synopsis ======== -.. c:function:: int ioctl( int fd, DMX_EXPBUF, struct dmx_exportbuffer *argp ) - :name: DMX_EXPBUF +.. c:macro:: DMX_EXPBUF +``int ioctl(int fd, DMX_EXPBUF, struct dmx_exportbuffer *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <dmx_fopen>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`dmx_exportbuffer`. - Description =========== @@ -61,11 +53,9 @@ driver, on success. This is a DMABUF file descriptor. The application may pass it to other DMABUF-aware devices. It is recommended to close a DMABUF file when it is no longer used to allow the associated memory to be reclaimed. - Examples ======== - .. code-block:: c int buffer_export(int v4lfd, enum dmx_buf_type bt, int index, int *dmafd) diff --git a/Documentation/userspace-api/media/dvb/dmx-fclose.rst b/Documentation/userspace-api/media/dvb/dmx-fclose.rst index e93bc60da508..719ac1d4f686 100644 --- a/Documentation/userspace-api/media/dvb/dmx-fclose.rst +++ b/Documentation/userspace-api/media/dvb/dmx-fclose.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _dmx_fclose: @@ -18,27 +12,23 @@ Name Digital TV demux close() - Synopsis -------- .. c:function:: int close(int fd) - :name: dvb-dmx-close - Arguments --------- ``fd`` File descriptor returned by a previous call to - :c:func:`open() <dvb-dmx-open>`. + :c:func:`open()`. Description ----------- This system call deactivates and deallocates a filter that was -previously allocated via the :c:func:`open() <dvb-dmx-open>` call. - +previously allocated via the :c:func:`open()` call. Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/dmx-fopen.rst b/Documentation/userspace-api/media/dvb/dmx-fopen.rst index ea988714558e..8f0a2b831d4a 100644 --- a/Documentation/userspace-api/media/dvb/dmx-fopen.rst +++ b/Documentation/userspace-api/media/dvb/dmx-fopen.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _dmx_fopen: @@ -18,12 +12,10 @@ Name Digital TV demux open() - Synopsis -------- .. c:function:: int open(const char *deviceName, int flags) - :name: dvb-dmx-open Arguments --------- @@ -54,7 +46,6 @@ Arguments - open in non-blocking mode (blocking mode is the default) - Description ----------- @@ -75,7 +66,6 @@ affect the semantics of the ``open()`` call itself. A device opened in blocking mode can later be put into non-blocking mode (and vice versa) using the ``F_SETFL`` command of the fcntl system call. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/dmx-fread.rst b/Documentation/userspace-api/media/dvb/dmx-fread.rst index 25501be818f8..78e9daef595a 100644 --- a/Documentation/userspace-api/media/dvb/dmx-fread.rst +++ b/Documentation/userspace-api/media/dvb/dmx-fread.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _dmx_fread: @@ -18,18 +12,16 @@ Name Digital TV demux read() - Synopsis -------- .. c:function:: size_t read(int fd, void *buf, size_t count) - :name: dvb-dmx-read Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`. + File descriptor returned by a previous call to :c:func:`open()`. ``buf`` Buffer to be filled @@ -51,7 +43,6 @@ to be transferred is implied by count. :c:type:`DMX_CHECK_CRC <dmx_sct_filter_params>` flag set, data that fails on CRC check will be silently ignored. - Return Value ------------ @@ -82,6 +73,5 @@ appropriately. - The driver failed to write to the callers buffer due to an invalid \*buf pointer. - The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/userspace-api/media/dvb/dmx-fwrite.rst b/Documentation/userspace-api/media/dvb/dmx-fwrite.rst index 4400f4ef8c65..e11ee0ba84a5 100644 --- a/Documentation/userspace-api/media/dvb/dmx-fwrite.rst +++ b/Documentation/userspace-api/media/dvb/dmx-fwrite.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _dmx_fwrite: @@ -18,18 +12,16 @@ Name Digital TV demux write() - Synopsis -------- .. c:function:: ssize_t write(int fd, const void *buf, size_t count) - :name: dvb-dmx-write Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`. + File descriptor returned by a previous call to :c:func:`open()`. ``buf`` Buffer with data to be written @@ -47,7 +39,6 @@ digitally recorded Transport Stream. Matching filters have to be defined in the corresponding physical demux device, ``/dev/dvb/adapter?/demux?``. The amount of data to be transferred is implied by count. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/dmx-get-pes-pids.rst b/Documentation/userspace-api/media/dvb/dmx-get-pes-pids.rst index e1873e3fdc01..4f5f0505c0d5 100644 --- a/Documentation/userspace-api/media/dvb/dmx-get-pes-pids.rst +++ b/Documentation/userspace-api/media/dvb/dmx-get-pes-pids.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_GET_PES_PIDS: @@ -18,23 +12,22 @@ Name DMX_GET_PES_PIDS - Synopsis -------- -.. c:function:: int ioctl(fd, DMX_GET_PES_PIDS, __u16 pids[5]) - :name: DMX_GET_PES_PIDS +.. c:macro:: DMX_GET_PES_PIDS + +``int ioctl(fd, DMX_GET_PES_PIDS, __u16 pids[5])`` Arguments --------- ``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. + File descriptor returned by :c:func:`open()`. ``pids`` Array used to store 5 Program IDs. - Description ----------- @@ -52,13 +45,11 @@ pids[DMX_PES_SUBTITLE] 3 first subtitle PID pids[DMX_PES_PCR] 4 first Program Clock Reference PID ======================= ======== ======================================= - .. note:: A value equal to 0xffff means that the PID was not filled by the Kernel. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/dmx-get-stc.rst b/Documentation/userspace-api/media/dvb/dmx-get-stc.rst index 026a884edb0a..6ada74f6eb18 100644 --- a/Documentation/userspace-api/media/dvb/dmx-get-stc.rst +++ b/Documentation/userspace-api/media/dvb/dmx-get-stc.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_GET_STC: @@ -18,23 +12,22 @@ Name DMX_GET_STC - Synopsis -------- -.. c:function:: int ioctl( int fd, DMX_GET_STC, struct dmx_stc *stc) - :name: DMX_GET_STC +.. c:macro:: DMX_GET_STC + +``int ioctl(int fd, DMX_GET_STC, struct dmx_stc *stc)`` Arguments --------- ``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. + File descriptor returned by :c:func:`open()`. ``stc`` Pointer to :c:type:`dmx_stc` where the stc data is to be stored. - Description ----------- @@ -46,7 +39,6 @@ The result is returned in form of a ratio with a 64 bit numerator and a 32 bit denominator, so the real 90kHz STC value is ``stc->stc / stc->base``. - Return Value ------------ @@ -68,6 +60,5 @@ appropriately. - Invalid stc number. - The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/userspace-api/media/dvb/dmx-mmap.rst b/Documentation/userspace-api/media/dvb/dmx-mmap.rst index 828ba9df73e2..8826c6226fb0 100644 --- a/Documentation/userspace-api/media/dvb/dmx-mmap.rst +++ b/Documentation/userspace-api/media/dvb/dmx-mmap.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _dmx-mmap: @@ -28,9 +22,7 @@ Synopsis #include <unistd.h> #include <sys/mman.h> - .. c:function:: void *mmap( void *start, size_t length, int prot, int flags, int fd, off_t offset ) - :name: dmx-mmap Arguments ========= @@ -61,7 +53,7 @@ Arguments ``MAP_FIXED`` requests that the driver selects no other address than the one specified. If the specified address cannot be used, - :ref:`mmap() <dmx-mmap>` will fail. If ``MAP_FIXED`` is specified, + :c:func:`mmap()` will fail. If ``MAP_FIXED`` is specified, ``start`` must be a multiple of the pagesize. Use of this option is discouraged. @@ -76,17 +68,16 @@ Arguments flags. ``fd`` - File descriptor returned by :ref:`open() <dmx_fopen>`. + File descriptor returned by :c:func:`open()`. ``offset`` Offset of the buffer in device memory, as returned by :ref:`DMX_QUERYBUF` ioctl. - Description =========== -The :ref:`mmap() <dmx-mmap>` function asks to map ``length`` bytes starting at +The :c:func:`mmap()` function asks to map ``length`` bytes starting at ``offset`` in the memory of the device specified by ``fd`` into the application address space, preferably at address ``start``. This latter address is a hint only, and is usually specified as 0. @@ -95,13 +86,12 @@ Suitable length and offset parameters are queried with the :ref:`DMX_QUERYBUF` ioctl. Buffers must be allocated with the :ref:`DMX_REQBUFS` ioctl before they can be queried. -To unmap buffers the :ref:`munmap() <dmx-munmap>` function is used. - +To unmap buffers the :c:func:`munmap()` function is used. Return Value ============ -On success :ref:`mmap() <dmx-mmap>` returns a pointer to the mapped buffer. On +On success :c:func:`mmap()` returns a pointer to the mapped buffer. On error ``MAP_FAILED`` (-1) is returned, and the ``errno`` variable is set appropriately. Possible error codes are: diff --git a/Documentation/userspace-api/media/dvb/dmx-munmap.rst b/Documentation/userspace-api/media/dvb/dmx-munmap.rst index 905fdd585a86..66bbc11e5c40 100644 --- a/Documentation/userspace-api/media/dvb/dmx-munmap.rst +++ b/Documentation/userspace-api/media/dvb/dmx-munmap.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _dmx-munmap: @@ -20,7 +14,6 @@ dmx-munmap - Unmap device memory .. warning:: This API is still experimental. - Synopsis ======== @@ -29,33 +22,29 @@ Synopsis #include <unistd.h> #include <sys/mman.h> - .. c:function:: int munmap( void *start, size_t length ) - :name: dmx-munmap Arguments ========= ``start`` Address of the mapped buffer as returned by the - :ref:`mmap() <dmx-mmap>` function. + :c:func:`mmap()` function. ``length`` Length of the mapped buffer. This must be the same value as given to - :ref:`mmap() <dmx-mmap>`. - + :c:func:`mmap()`. Description =========== -Unmaps a previously with the :ref:`mmap() <dmx-mmap>` function mapped +Unmaps a previously with the :c:func:`mmap()` function mapped buffer and frees it, if possible. - Return Value ============ -On success :ref:`munmap() <dmx-munmap>` returns 0, on failure -1 and the +On success :c:func:`munmap()` returns 0, on failure -1 and the ``errno`` variable is set appropriately: EINVAL diff --git a/Documentation/userspace-api/media/dvb/dmx-qbuf.rst b/Documentation/userspace-api/media/dvb/dmx-qbuf.rst index 2c4657c2c86d..17e70143c1b0 100644 --- a/Documentation/userspace-api/media/dvb/dmx-qbuf.rst +++ b/Documentation/userspace-api/media/dvb/dmx-qbuf.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_QBUF: @@ -20,27 +14,26 @@ DMX_QBUF - DMX_DQBUF - Exchange a buffer with the driver .. warning:: this API is still experimental - Synopsis ======== -.. c:function:: int ioctl( int fd, DMX_QBUF, struct dmx_buffer *argp ) - :name: DMX_QBUF +.. c:macro:: DMX_QBUF + +``int ioctl(int fd, DMX_QBUF, struct dmx_buffer *argp)`` -.. c:function:: int ioctl( int fd, DMX_DQBUF, struct dmx_buffer *argp ) - :name: DMX_DQBUF +.. c:macro:: DMX_DQBUF +``int ioctl(int fd, DMX_DQBUF, struct dmx_buffer *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <dmx_fopen>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`dmx_buffer`. - Description =========== @@ -67,13 +60,12 @@ the driver fills the remaining fields or returns an error code. By default ``DMX_DQBUF`` blocks when no buffer is in the outgoing queue. When the ``O_NONBLOCK`` flag was given to the -:ref:`open() <dmx_fopen>` function, ``DMX_DQBUF`` returns +:c:func:`open()` function, ``DMX_DQBUF`` returns immediately with an ``EAGAIN`` error code when no buffer is available. The struct :c:type:`dmx_buffer` structure is specified in :ref:`buffer`. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/dmx-querybuf.rst b/Documentation/userspace-api/media/dvb/dmx-querybuf.rst index 6e234daf1c44..08ee9853d6b4 100644 --- a/Documentation/userspace-api/media/dvb/dmx-querybuf.rst +++ b/Documentation/userspace-api/media/dvb/dmx-querybuf.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_QUERYBUF: @@ -20,24 +14,22 @@ DMX_QUERYBUF - Query the status of a buffer .. warning:: this API is still experimental - Synopsis ======== -.. c:function:: int ioctl( int fd, DMX_QUERYBUF, struct dvb_buffer *argp ) - :name: DMX_QUERYBUF +.. c:macro:: DMX_QUERYBUF +``int ioctl(int fd, DMX_QUERYBUF, struct dvb_buffer *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <dmx_fopen>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`dvb_buffer`. - Description =========== diff --git a/Documentation/userspace-api/media/dvb/dmx-remove-pid.rst b/Documentation/userspace-api/media/dvb/dmx-remove-pid.rst index dee553a48b63..f75b33e5e49a 100644 --- a/Documentation/userspace-api/media/dvb/dmx-remove-pid.rst +++ b/Documentation/userspace-api/media/dvb/dmx-remove-pid.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_REMOVE_PID: @@ -18,24 +12,22 @@ Name DMX_REMOVE_PID - Synopsis -------- -.. c:function:: int ioctl(fd, DMX_REMOVE_PID, __u16 *pid) - :name: DMX_REMOVE_PID +.. c:macro:: DMX_REMOVE_PID +``int ioctl(fd, DMX_REMOVE_PID, __u16 *pid)`` Arguments --------- ``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. + File descriptor returned by :c:func:`open()`. ``pid`` PID of the PES filter to be removed. - Description ----------- @@ -44,7 +36,6 @@ transport stream filter, e. g. a filter previously set up with output equal to :c:type:`DMX_OUT_TSDEMUX_TAP <dmx_output>`, created via either :ref:`DMX_SET_PES_FILTER` or :ref:`DMX_ADD_PID`. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst b/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst index 9b9be45d2b0b..d2bb1909ec98 100644 --- a/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst +++ b/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_REQBUFS: @@ -20,19 +14,18 @@ DMX_REQBUFS - Initiate Memory Mapping and/or DMA buffer I/O .. warning:: this API is still experimental - Synopsis ======== -.. c:function:: int ioctl( int fd, DMX_REQBUFS, struct dmx_requestbuffers *argp ) - :name: DMX_REQBUFS +.. c:macro:: DMX_REQBUFS +``int ioctl(int fd, DMX_REQBUFS, struct dmx_requestbuffers *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <dmx_fopen>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`dmx_requestbuffers`. @@ -71,7 +64,6 @@ buffers, however this cannot succeed when any buffers are still mapped. A ``count`` value of zero frees all buffers, after aborting or finishing any DMA in progress. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/dmx-set-buffer-size.rst b/Documentation/userspace-api/media/dvb/dmx-set-buffer-size.rst index 7c91da1da4be..13ce4092c2d2 100644 --- a/Documentation/userspace-api/media/dvb/dmx-set-buffer-size.rst +++ b/Documentation/userspace-api/media/dvb/dmx-set-buffer-size.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_SET_BUFFER_SIZE: @@ -18,19 +12,18 @@ Name DMX_SET_BUFFER_SIZE - Synopsis -------- -.. c:function:: int ioctl( int fd, DMX_SET_BUFFER_SIZE, unsigned long size) - :name: DMX_SET_BUFFER_SIZE +.. c:macro:: DMX_SET_BUFFER_SIZE +``int ioctl(int fd, DMX_SET_BUFFER_SIZE, unsigned long size)`` Arguments --------- ``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. + File descriptor returned by :c:func:`open()`. ``size`` Unsigned long size @@ -43,11 +36,9 @@ filtered data. The default size is two maximum sized sections, i.e. if this function is not called a buffer size of ``2 * 4096`` bytes will be used. - Return Value ------------ - On success 0 is returned. On error -1 is returned, and the ``errno`` variable is set diff --git a/Documentation/userspace-api/media/dvb/dmx-set-filter.rst b/Documentation/userspace-api/media/dvb/dmx-set-filter.rst index cb3333349bd0..f43455b7adae 100644 --- a/Documentation/userspace-api/media/dvb/dmx-set-filter.rst +++ b/Documentation/userspace-api/media/dvb/dmx-set-filter.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_SET_FILTER: @@ -18,24 +12,23 @@ Name DMX_SET_FILTER - Synopsis -------- -.. c:function:: int ioctl( int fd, DMX_SET_FILTER, struct dmx_sct_filter_params *params) - :name: DMX_SET_FILTER +.. c:macro:: DMX_SET_FILTER + +``int ioctl(int fd, DMX_SET_FILTER, struct dmx_sct_filter_params *params)`` Arguments --------- ``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. + File descriptor returned by :c:func:`open()`. ``params`` Pointer to structure containing filter parameters. - Description ----------- @@ -50,11 +43,9 @@ operation should be started immediately (without waiting for a :ref:`DMX_START` ioctl call). If a filter was previously set-up, this filter will be canceled, and the receive buffer will be flushed. - Return Value ------------ - On success 0 is returned. On error -1 is returned, and the ``errno`` variable is set diff --git a/Documentation/userspace-api/media/dvb/dmx-set-pes-filter.rst b/Documentation/userspace-api/media/dvb/dmx-set-pes-filter.rst index 26da56947652..5bb682e4a88f 100644 --- a/Documentation/userspace-api/media/dvb/dmx-set-pes-filter.rst +++ b/Documentation/userspace-api/media/dvb/dmx-set-pes-filter.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_SET_PES_FILTER: @@ -18,25 +12,22 @@ Name DMX_SET_PES_FILTER - Synopsis -------- -.. c:function:: int ioctl( int fd, DMX_SET_PES_FILTER, struct dmx_pes_filter_params *params) - :name: DMX_SET_PES_FILTER +.. c:macro:: DMX_SET_PES_FILTER +``int ioctl(int fd, DMX_SET_PES_FILTER, struct dmx_pes_filter_params *params)`` Arguments --------- - ``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. + File descriptor returned by :c:func:`open()`. ``params`` Pointer to structure containing filter parameters. - Description ----------- @@ -45,7 +36,6 @@ provided. By a PES filter is meant a filter that is based just on the packet identifier (PID), i.e. no PES header or payload filtering capability is supported. - Return Value ------------ @@ -61,7 +51,6 @@ appropriately. :stub-columns: 0 :widths: 1 16 - - .. row 1 - ``EBUSY`` @@ -71,6 +60,5 @@ appropriately. Make sure that these filters are stopped before starting this filter. - The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/userspace-api/media/dvb/dmx-start.rst b/Documentation/userspace-api/media/dvb/dmx-start.rst index a1d35f01fc95..aedccf952a14 100644 --- a/Documentation/userspace-api/media/dvb/dmx-start.rst +++ b/Documentation/userspace-api/media/dvb/dmx-start.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_START: @@ -18,19 +12,18 @@ Name DMX_START - Synopsis -------- -.. c:function:: int ioctl( int fd, DMX_START) - :name: DMX_START +.. c:macro:: DMX_START +``int ioctl(int fd, DMX_START)`` Arguments --------- ``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. + File descriptor returned by :c:func:`open()`. Description ----------- @@ -38,7 +31,6 @@ Description This ioctl call is used to start the actual filtering operation defined via the ioctl calls :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER`. - Return Value ------------ @@ -53,7 +45,6 @@ appropriately. :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EINVAL`` @@ -70,6 +61,5 @@ appropriately. Make sure that these filters are stopped before starting this filter. - The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/userspace-api/media/dvb/dmx-stop.rst b/Documentation/userspace-api/media/dvb/dmx-stop.rst index 5e6e805010d0..8661e6772104 100644 --- a/Documentation/userspace-api/media/dvb/dmx-stop.rst +++ b/Documentation/userspace-api/media/dvb/dmx-stop.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _DMX_STOP: @@ -18,19 +12,18 @@ Name DMX_STOP - Synopsis -------- -.. c:function:: int ioctl( int fd, DMX_STOP) - :name: DMX_STOP +.. c:macro:: DMX_STOP +``int ioctl(int fd, DMX_STOP)`` Arguments --------- ``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. + File descriptor returned by :c:func:`open()`. Description ----------- @@ -39,7 +32,6 @@ This ioctl call is used to stop the actual filtering operation defined via the ioctl calls :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER` and started via the :ref:`DMX_START` command. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/dmx_fcalls.rst b/Documentation/userspace-api/media/dvb/dmx_fcalls.rst index 04e150f00f84..a14e7a61f90b 100644 --- a/Documentation/userspace-api/media/dvb/dmx_fcalls.rst +++ b/Documentation/userspace-api/media/dvb/dmx_fcalls.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dmx_fcalls: diff --git a/Documentation/userspace-api/media/dvb/dmx_types.rst b/Documentation/userspace-api/media/dvb/dmx_types.rst index 635b8fd363be..33458fbb84ab 100644 --- a/Documentation/userspace-api/media/dvb/dmx_types.rst +++ b/Documentation/userspace-api/media/dvb/dmx_types.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dmx_types: diff --git a/Documentation/userspace-api/media/dvb/dvb-fe-read-status.rst b/Documentation/userspace-api/media/dvb/dvb-fe-read-status.rst index 5d6a7735a9d1..fbd0548f5fb9 100644 --- a/Documentation/userspace-api/media/dvb/dvb-fe-read-status.rst +++ b/Documentation/userspace-api/media/dvb/dvb-fe-read-status.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dvb-fe-read-status: diff --git a/Documentation/userspace-api/media/dvb/dvb-frontend-event.rst b/Documentation/userspace-api/media/dvb/dvb-frontend-event.rst index 7f5e56cf75cb..0e2fd3a0a7c0 100644 --- a/Documentation/userspace-api/media/dvb/dvb-frontend-event.rst +++ b/Documentation/userspace-api/media/dvb/dvb-frontend-event.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. c:type:: dvb_frontend_event diff --git a/Documentation/userspace-api/media/dvb/dvb-frontend-parameters.rst b/Documentation/userspace-api/media/dvb/dvb-frontend-parameters.rst index 83b1bcc6ef54..9dd2f542441e 100644 --- a/Documentation/userspace-api/media/dvb/dvb-frontend-parameters.rst +++ b/Documentation/userspace-api/media/dvb/dvb-frontend-parameters.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. c:type:: dvb_frontend_parameters diff --git a/Documentation/userspace-api/media/dvb/dvbapi.rst b/Documentation/userspace-api/media/dvb/dvbapi.rst index 74b16ab3fd94..1dda69343f34 100644 --- a/Documentation/userspace-api/media/dvb/dvbapi.rst +++ b/Documentation/userspace-api/media/dvb/dvbapi.rst @@ -1,12 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections - +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. include:: <isonum.txt> .. _dvbapi: diff --git a/Documentation/userspace-api/media/dvb/dvbproperty.rst b/Documentation/userspace-api/media/dvb/dvbproperty.rst index 1716733d24ba..981da20afd49 100644 --- a/Documentation/userspace-api/media/dvb/dvbproperty.rst +++ b/Documentation/userspace-api/media/dvb/dvbproperty.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _frontend-properties: diff --git a/Documentation/userspace-api/media/dvb/dvbstb.svg b/Documentation/userspace-api/media/dvb/dvbstb.svg index b333d0ff944f..87e68baa056b 100644 --- a/Documentation/userspace-api/media/dvb/dvbstb.svg +++ b/Documentation/userspace-api/media/dvb/dvbstb.svg @@ -1,31 +1,5 @@ <?xml version="1.0" encoding="UTF-8"?> -<!-- - This file is dual-licensed: you can use it either under the terms - of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this - dual licensing only applies to this file, and not this project as a - whole. - - a) This file is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation version 2 of - the License. - - This file is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - Or, alternatively, - - b) Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later --> <svg id="svg2" width="15.847cm" height="8.4187cm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 23770.123 12628.122" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><defs id="defs142"><marker id="Arrow1Lend" overflow="visible" orient="auto"><path id="path954" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker><marker id="marker1243" overflow="visible" orient="auto"><path id="path1241" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker></defs><metadata id="metadata519"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><rect id="rect197" class="BoundingBox" x="5355.1" y="13.122" width="18403" height="9603" fill="none"/><path id="path199" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="#fff"/><path id="path201" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="none" stroke="#000"/><rect id="rect206" class="BoundingBox" x="13.122" y="4013.1" width="4544" height="2403" fill="none"/><path id="path208" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path210" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text212" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="1281.1219" y="5435.1221"><tspan id="tspan218" fill="#000000">Antena</tspan></tspan></tspan></text> diff --git a/Documentation/userspace-api/media/dvb/examples.rst b/Documentation/userspace-api/media/dvb/examples.rst index bd0adde86b96..086587c65a57 100644 --- a/Documentation/userspace-api/media/dvb/examples.rst +++ b/Documentation/userspace-api/media/dvb/examples.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dvb_examples: diff --git a/Documentation/userspace-api/media/dvb/fe-bandwidth-t.rst b/Documentation/userspace-api/media/dvb/fe-bandwidth-t.rst index 6293287af67c..904b0c33a3ec 100644 --- a/Documentation/userspace-api/media/dvb/fe-bandwidth-t.rst +++ b/Documentation/userspace-api/media/dvb/fe-bandwidth-t.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ****************** Frontend bandwidth diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-recv-slave-reply.rst index b520974e8c46..d9be817f0390 100644 --- a/Documentation/userspace-api/media/dvb/fe-diseqc-recv-slave-reply.rst +++ b/Documentation/userspace-api/media/dvb/fe-diseqc-recv-slave-reply.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_DISEQC_RECV_SLAVE_REPLY: @@ -18,24 +12,22 @@ Name FE_DISEQC_RECV_SLAVE_REPLY - Receives reply from a DiSEqC 2.0 command - Synopsis ======== -.. c:function:: int ioctl( int fd, FE_DISEQC_RECV_SLAVE_REPLY, struct dvb_diseqc_slave_reply *argp ) - :name: FE_DISEQC_RECV_SLAVE_REPLY +.. c:macro:: FE_DISEQC_RECV_SLAVE_REPLY +``int ioctl(int fd, FE_DISEQC_RECV_SLAVE_REPLY, struct dvb_diseqc_slave_reply *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``argp`` pointer to struct :c:type:`dvb_diseqc_slave_reply`. - Description =========== diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-reset-overload.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-reset-overload.rst index c59af46b8e87..d36f7d1157c6 100644 --- a/Documentation/userspace-api/media/dvb/fe-diseqc-reset-overload.rst +++ b/Documentation/userspace-api/media/dvb/fe-diseqc-reset-overload.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_DISEQC_RESET_OVERLOAD: @@ -18,19 +12,18 @@ Name FE_DISEQC_RESET_OVERLOAD - Restores the power to the antenna subsystem, if it was powered off due - to power overload. - Synopsis ======== -.. c:function:: int ioctl( int fd, FE_DISEQC_RESET_OVERLOAD, NULL ) - :name: FE_DISEQC_RESET_OVERLOAD +.. c:macro:: FE_DISEQC_RESET_OVERLOAD +``int ioctl(int fd, FE_DISEQC_RESET_OVERLOAD, NULL)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. Description =========== @@ -40,7 +33,6 @@ this ioctl call restores the power to the bus. The call requires read/write access to the device. This call has no effect if the device is manually powered off. Not all Digital TV adapters support this ioctl. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-send-burst.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-send-burst.rst index 19b51d0550f7..8fb73ee29951 100644 --- a/Documentation/userspace-api/media/dvb/fe-diseqc-send-burst.rst +++ b/Documentation/userspace-api/media/dvb/fe-diseqc-send-burst.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_DISEQC_SEND_BURST: @@ -18,24 +12,22 @@ Name FE_DISEQC_SEND_BURST - Sends a 22KHz tone burst for 2x1 mini DiSEqC satellite selection. - Synopsis ======== -.. c:function:: int ioctl( int fd, FE_DISEQC_SEND_BURST, enum fe_sec_mini_cmd tone ) - :name: FE_DISEQC_SEND_BURST +.. c:macro:: FE_DISEQC_SEND_BURST +``int ioctl(int fd, FE_DISEQC_SEND_BURST, enum fe_sec_mini_cmd tone)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``tone`` An integer enumered value described at :c:type:`fe_sec_mini_cmd`. - Description =========== @@ -46,7 +38,6 @@ read/write permissions. It provides support for what's specified at `Digital Satellite Equipment Control (DiSEqC) - Simple "ToneBurst" Detection Circuit specification. <http://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/associated%20docs/simple_tone_burst_detec.pdf>`__ - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-send-master-cmd.rst index f75513d018c8..c97029def2ee 100644 --- a/Documentation/userspace-api/media/dvb/fe-diseqc-send-master-cmd.rst +++ b/Documentation/userspace-api/media/dvb/fe-diseqc-send-master-cmd.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_DISEQC_SEND_MASTER_CMD: @@ -18,25 +12,23 @@ Name FE_DISEQC_SEND_MASTER_CMD - Sends a DiSEqC command - Synopsis ======== -.. c:function:: int ioctl( int fd, FE_DISEQC_SEND_MASTER_CMD, struct dvb_diseqc_master_cmd *argp ) - :name: FE_DISEQC_SEND_MASTER_CMD +.. c:macro:: FE_DISEQC_SEND_MASTER_CMD +``int ioctl(int fd, FE_DISEQC_SEND_MASTER_CMD, struct dvb_diseqc_master_cmd *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``argp`` pointer to struct :c:type:`dvb_diseqc_master_cmd` - Description =========== diff --git a/Documentation/userspace-api/media/dvb/fe-dishnetwork-send-legacy-cmd.rst b/Documentation/userspace-api/media/dvb/fe-dishnetwork-send-legacy-cmd.rst index ea66f72fe5f8..d1dba74c55a9 100644 --- a/Documentation/userspace-api/media/dvb/fe-dishnetwork-send-legacy-cmd.rst +++ b/Documentation/userspace-api/media/dvb/fe-dishnetwork-send-legacy-cmd.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_DISHNETWORK_SEND_LEGACY_CMD: @@ -18,24 +12,22 @@ Name FE_DISHNETWORK_SEND_LEGACY_CMD - Synopsis ======== -.. c:function:: int ioctl(int fd, FE_DISHNETWORK_SEND_LEGACY_CMD, unsigned long cmd) - :name: FE_DISHNETWORK_SEND_LEGACY_CMD +.. c:macro:: FE_DISHNETWORK_SEND_LEGACY_CMD +``int ioctl(int fd, FE_DISHNETWORK_SEND_LEGACY_CMD, unsigned long cmd)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <dvb-fe-open>`. + File descriptor returned by :c:func:`open()`. ``cmd`` Sends the specified raw cmd to the dish via DISEqC. - Description =========== @@ -49,7 +41,6 @@ frontend, for Dish Network legacy switches. As support for this ioctl were added in 2004, this means that such dishes were already legacy in 2004. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-enable-high-lnb-voltage.rst b/Documentation/userspace-api/media/dvb/fe-enable-high-lnb-voltage.rst index 9bdf1e898ddc..40d7320f82f7 100644 --- a/Documentation/userspace-api/media/dvb/fe-enable-high-lnb-voltage.rst +++ b/Documentation/userspace-api/media/dvb/fe-enable-high-lnb-voltage.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_ENABLE_HIGH_LNB_VOLTAGE: @@ -18,19 +12,18 @@ Name FE_ENABLE_HIGH_LNB_VOLTAGE - Select output DC level between normal LNBf voltages or higher LNBf - voltages. - Synopsis ======== -.. c:function:: int ioctl( int fd, FE_ENABLE_HIGH_LNB_VOLTAGE, unsigned int high ) - :name: FE_ENABLE_HIGH_LNB_VOLTAGE +.. c:macro:: FE_ENABLE_HIGH_LNB_VOLTAGE +``int ioctl(int fd, FE_ENABLE_HIGH_LNB_VOLTAGE, unsigned int high)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``high`` Valid flags: @@ -40,7 +33,6 @@ Arguments - >0 - enables slightly higher voltages instead of 13/18V, in order to compensate for long antenna cables. - Description =========== @@ -48,7 +40,6 @@ Select output DC level between normal LNBf voltages or higher LNBf voltages between 0 (normal) or a value grater than 0 for higher voltages. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-get-event.rst b/Documentation/userspace-api/media/dvb/fe-get-event.rst index 19df41dca238..f63029eca90e 100644 --- a/Documentation/userspace-api/media/dvb/fe-get-event.rst +++ b/Documentation/userspace-api/media/dvb/fe-get-event.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_GET_EVENT: @@ -20,24 +14,22 @@ FE_GET_EVENT .. attention:: This ioctl is deprecated. - Synopsis ======== -.. c:function:: int ioctl(int fd, FE_GET_EVENT, struct dvb_frontend_event *ev) - :name: FE_GET_EVENT +.. c:macro:: FE_GET_EVENT +``int ioctl(int fd, FE_GET_EVENT, struct dvb_frontend_event *ev)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <dvb-fe-open>`. + File descriptor returned by :c:func:`open()`. ``ev`` Points to the location where the event, if any, is to be stored. - Description =========== @@ -47,7 +39,6 @@ or non-blocking mode. In the latter case, the call fails immediately with errno set to ``EWOULDBLOCK``. In the former case, the call blocks until an event becomes available. - Return Value ============ @@ -56,12 +47,10 @@ On success 0 is returned. On error -1 is returned, and the ``errno`` variable is set appropriately. - .. flat-table:: :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EWOULDBLOCK`` diff --git a/Documentation/userspace-api/media/dvb/fe-get-frontend.rst b/Documentation/userspace-api/media/dvb/fe-get-frontend.rst index 7968adc8e982..40700533e7e7 100644 --- a/Documentation/userspace-api/media/dvb/fe-get-frontend.rst +++ b/Documentation/userspace-api/media/dvb/fe-get-frontend.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_GET_FRONTEND: @@ -20,32 +14,28 @@ FE_GET_FRONTEND .. attention:: This ioctl is deprecated. - Synopsis ======== -.. c:function:: int ioctl(int fd, FE_GET_FRONTEND, struct dvb_frontend_parameters *p) - :name: FE_GET_FRONTEND +.. c:macro:: FE_GET_FRONTEND +``int ioctl(int fd, FE_GET_FRONTEND, struct dvb_frontend_parameters *p)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <dvb-fe-open>`. - + File descriptor returned by :c:func:`open()`. ``p`` Points to parameters for tuning operation. - Description =========== This ioctl call queries the currently effective frontend parameters. For this command, read-only access to the device is sufficient. - Return Value ============ @@ -58,7 +48,6 @@ appropriately. :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EINVAL`` diff --git a/Documentation/userspace-api/media/dvb/fe-get-info.rst b/Documentation/userspace-api/media/dvb/fe-get-info.rst index 6b3ffd301142..2e5f0209846f 100644 --- a/Documentation/userspace-api/media/dvb/fe-get-info.rst +++ b/Documentation/userspace-api/media/dvb/fe-get-info.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_GET_INFO: @@ -19,24 +13,22 @@ Name FE_GET_INFO - Query Digital TV frontend capabilities and returns information about the - front-end. This call only requires read-only access to the device. - Synopsis ======== -.. c:function:: int ioctl( int fd, FE_GET_INFO, struct dvb_frontend_info *argp ) - :name: FE_GET_INFO +.. c:macro:: FE_GET_INFO +``int ioctl(int fd, FE_GET_INFO, struct dvb_frontend_info *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``argp`` pointer to struct :c:type:`dvb_frontend_info` - Description =========== @@ -47,7 +39,6 @@ takes a pointer to dvb_frontend_info which is filled by the driver. When the driver is not compatible with this specification the ioctl returns an error. - frontend capabilities ===================== @@ -56,7 +47,6 @@ supported only on some specific frontend types. The frontend capabilities are described at :c:type:`fe_caps`. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-get-property.rst b/Documentation/userspace-api/media/dvb/fe-get-property.rst index 088d4e319405..29363dc4a0c3 100644 --- a/Documentation/userspace-api/media/dvb/fe-get-property.rst +++ b/Documentation/userspace-api/media/dvb/fe-get-property.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_GET_PROPERTY: @@ -18,27 +12,26 @@ Name FE_SET_PROPERTY - FE_GET_PROPERTY - FE_SET_PROPERTY sets one or more frontend properties. - FE_GET_PROPERTY returns one or more frontend properties. - Synopsis ======== -.. c:function:: int ioctl( int fd, FE_GET_PROPERTY, struct dtv_properties *argp ) - :name: FE_GET_PROPERTY +.. c:macro:: FE_GET_PROPERTY + +``int ioctl(int fd, FE_GET_PROPERTY, struct dtv_properties *argp)`` -.. c:function:: int ioctl( int fd, FE_SET_PROPERTY, struct dtv_properties *argp ) - :name: FE_SET_PROPERTY +.. c:macro:: FE_SET_PROPERTY +``int ioctl(int fd, FE_SET_PROPERTY, struct dtv_properties *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`dtv_properties`. - Description =========== @@ -70,7 +63,6 @@ depends on the delivery system and on the device: - This call only requires read-only access to the device. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-read-ber.rst b/Documentation/userspace-api/media/dvb/fe-read-ber.rst index d0a706ac9011..f33f1dd20501 100644 --- a/Documentation/userspace-api/media/dvb/fe-read-ber.rst +++ b/Documentation/userspace-api/media/dvb/fe-read-ber.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_READ_BER: @@ -23,20 +17,19 @@ FE_READ_BER Synopsis ======== -.. c:function:: int ioctl(int fd, FE_READ_BER, uint32_t *ber) - :name: FE_READ_BER +.. c:macro:: FE_READ_BER +``int ioctl(int fd, FE_READ_BER, uint32_t *ber)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <dvb-fe-open>`. + File descriptor returned by :c:func:`open()`. ``ber`` The bit error rate is stored into \*ber. - Description =========== @@ -44,7 +37,6 @@ This ioctl call returns the bit error rate for the signal currently received/demodulated by the front-end. For this command, read-only access to the device is sufficient. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-read-signal-strength.rst b/Documentation/userspace-api/media/dvb/fe-read-signal-strength.rst index df79837de47d..2b7d06145cb1 100644 --- a/Documentation/userspace-api/media/dvb/fe-read-signal-strength.rst +++ b/Documentation/userspace-api/media/dvb/fe-read-signal-strength.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_READ_SIGNAL_STRENGTH: @@ -23,20 +17,19 @@ FE_READ_SIGNAL_STRENGTH Synopsis ======== -.. c:function:: int ioctl( int fd, FE_READ_SIGNAL_STRENGTH, uint16_t *strength) - :name: FE_READ_SIGNAL_STRENGTH +.. c:macro:: FE_READ_SIGNAL_STRENGTH +``int ioctl(int fd, FE_READ_SIGNAL_STRENGTH, uint16_t *strength)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <dvb-fe-open>`. + File descriptor returned by :c:func:`open()`. ``strength`` The signal strength value is stored into \*strength. - Description =========== @@ -44,7 +37,6 @@ This ioctl call returns the signal strength value for the signal currently received by the front-end. For this command, read-only access to the device is sufficient. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-read-snr.rst b/Documentation/userspace-api/media/dvb/fe-read-snr.rst index e56147a40e23..e44e559ab7e8 100644 --- a/Documentation/userspace-api/media/dvb/fe-read-snr.rst +++ b/Documentation/userspace-api/media/dvb/fe-read-snr.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_READ_SNR: @@ -23,20 +17,19 @@ FE_READ_SNR Synopsis ======== -.. c:function:: int ioctl(int fd, FE_READ_SNR, int16_t *snr) - :name: FE_READ_SNR +.. c:macro:: FE_READ_SNR +``int ioctl(int fd, FE_READ_SNR, int16_t *snr)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <dvb-fe-open>`. + File descriptor returned by :c:func:`open()`. ``snr`` The signal-to-noise ratio is stored into \*snr. - Description =========== @@ -44,7 +37,6 @@ This ioctl call returns the signal-to-noise ratio for the signal currently received by the front-end. For this command, read-only access to the device is sufficient. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-read-status.rst b/Documentation/userspace-api/media/dvb/fe-read-status.rst index cf781d463a20..75c6ee60ac9c 100644 --- a/Documentation/userspace-api/media/dvb/fe-read-status.rst +++ b/Documentation/userspace-api/media/dvb/fe-read-status.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_READ_STATUS: @@ -18,25 +12,23 @@ Name FE_READ_STATUS - Returns status information about the front-end. This call only requires - read-only access to the device - Synopsis ======== -.. c:function:: int ioctl( int fd, FE_READ_STATUS, unsigned int *status ) - :name: FE_READ_STATUS +.. c:macro:: FE_READ_STATUS +``int ioctl(int fd, FE_READ_STATUS, unsigned int *status)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``status`` pointer to a bitmask integer filled with the values defined by enum :c:type:`fe_status`. - Description =========== @@ -51,7 +43,6 @@ written. varies according with the architecture. This needs to be fixed in the future. - int fe_status ============= @@ -59,7 +50,6 @@ The fe_status parameter is used to indicate the current state and/or state changes of the frontend hardware. It is produced using the enum :c:type:`fe_status` values on a bitmask - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-read-uncorrected-blocks.rst b/Documentation/userspace-api/media/dvb/fe-read-uncorrected-blocks.rst index d042e8c86930..653cd99a66f5 100644 --- a/Documentation/userspace-api/media/dvb/fe-read-uncorrected-blocks.rst +++ b/Documentation/userspace-api/media/dvb/fe-read-uncorrected-blocks.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_READ_UNCORRECTED_BLOCKS: @@ -23,20 +17,19 @@ FE_READ_UNCORRECTED_BLOCKS Synopsis ======== -.. c:function:: int ioctl( int fd, FE_READ_UNCORRECTED_BLOCKS, uint32_t *ublocks) - :name: FE_READ_UNCORRECTED_BLOCKS +.. c:macro:: FE_READ_UNCORRECTED_BLOCKS +``int ioctl(int fd, FE_READ_UNCORRECTED_BLOCKS, uint32_t *ublocks)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <dvb-fe-open>`. + File descriptor returned by :c:func:`open()`. ``ublocks`` The total number of uncorrected blocks seen by the driver so far. - Description =========== @@ -46,7 +39,6 @@ increment in block count during a specific time interval should be calculated. For this command, read-only access to the device is sufficient. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-set-frontend-tune-mode.rst b/Documentation/userspace-api/media/dvb/fe-set-frontend-tune-mode.rst index 8e059967f49c..56923c1a66b0 100644 --- a/Documentation/userspace-api/media/dvb/fe-set-frontend-tune-mode.rst +++ b/Documentation/userspace-api/media/dvb/fe-set-frontend-tune-mode.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_SET_FRONTEND_TUNE_MODE: @@ -18,19 +12,18 @@ Name FE_SET_FRONTEND_TUNE_MODE - Allow setting tuner mode flags to the frontend. - Synopsis ======== -.. c:function:: int ioctl( int fd, FE_SET_FRONTEND_TUNE_MODE, unsigned int flags ) - :name: FE_SET_FRONTEND_TUNE_MODE +.. c:macro:: FE_SET_FRONTEND_TUNE_MODE +``int ioctl(int fd, FE_SET_FRONTEND_TUNE_MODE, unsigned int flags)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``flags`` Valid flags: @@ -44,14 +37,12 @@ Arguments is closed, this flag will be automatically turned off when the device is reopened read-write. - Description =========== Allow setting tuner mode flags to the frontend, between 0 (normal) or ``FE_TUNE_MODE_ONESHOT`` mode - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-set-frontend.rst b/Documentation/userspace-api/media/dvb/fe-set-frontend.rst index 960c95cb18a0..d1b857632059 100644 --- a/Documentation/userspace-api/media/dvb/fe-set-frontend.rst +++ b/Documentation/userspace-api/media/dvb/fe-set-frontend.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_SET_FRONTEND: @@ -20,24 +14,22 @@ Name FE_SET_FRONTEND - Synopsis ======== -.. c:function:: int ioctl(int fd, FE_SET_FRONTEND, struct dvb_frontend_parameters *p) - :name: FE_SET_FRONTEND +.. c:macro:: FE_SET_FRONTEND +``int ioctl(int fd, FE_SET_FRONTEND, struct dvb_frontend_parameters *p)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <dvb-fe-open>`. + File descriptor returned by :c:func:`open()`. ``p`` Points to parameters for tuning operation. - Description =========== @@ -51,7 +43,6 @@ operation is initiated before the previous one was completed, the previous operation will be aborted in favor of the new one. This command requires read/write access to the device. - Return Value ============ @@ -73,6 +64,5 @@ appropriately. - Maximum supported symbol rate reached. - Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/userspace-api/media/dvb/fe-set-tone.rst b/Documentation/userspace-api/media/dvb/fe-set-tone.rst index 5726a20c7991..9f44bf946183 100644 --- a/Documentation/userspace-api/media/dvb/fe-set-tone.rst +++ b/Documentation/userspace-api/media/dvb/fe-set-tone.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_SET_TONE: @@ -18,24 +12,22 @@ Name FE_SET_TONE - Sets/resets the generation of the continuous 22kHz tone. - Synopsis ======== -.. c:function:: int ioctl( int fd, FE_SET_TONE, enum fe_sec_tone_mode tone ) - :name: FE_SET_TONE +.. c:macro:: FE_SET_TONE +``int ioctl(int fd, FE_SET_TONE, enum fe_sec_tone_mode tone)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``tone`` an integer enumered value described at :c:type:`fe_sec_tone_mode` - Description =========== @@ -52,7 +44,6 @@ this is done using the DiSEqC ioctls. capability of selecting the band. So, it is recommended that applications would change to SEC_TONE_OFF when the device is not used. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-set-voltage.rst b/Documentation/userspace-api/media/dvb/fe-set-voltage.rst index f3191808f4fd..c66771830be1 100644 --- a/Documentation/userspace-api/media/dvb/fe-set-voltage.rst +++ b/Documentation/userspace-api/media/dvb/fe-set-voltage.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _FE_SET_VOLTAGE: @@ -18,24 +12,22 @@ Name FE_SET_VOLTAGE - Allow setting the DC level sent to the antenna subsystem. - Synopsis ======== -.. c:function:: int ioctl( int fd, FE_SET_VOLTAGE, enum fe_sec_voltage voltage ) - :name: FE_SET_VOLTAGE +.. c:macro:: FE_SET_VOLTAGE +``int ioctl(int fd, FE_SET_VOLTAGE, enum fe_sec_voltage voltage)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``voltage`` an integer enumered value described at :c:type:`fe_sec_voltage` - Description =========== @@ -56,7 +48,6 @@ power up the LNBf. the voltage to SEC_VOLTAGE_OFF while the device is not is used is recommended. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/fe-type-t.rst b/Documentation/userspace-api/media/dvb/fe-type-t.rst index 1617a8cc9045..e8499d482700 100644 --- a/Documentation/userspace-api/media/dvb/fe-type-t.rst +++ b/Documentation/userspace-api/media/dvb/fe-type-t.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ************* Frontend type diff --git a/Documentation/userspace-api/media/dvb/fe_property_parameters.rst b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst index 3f4ced2800e3..ecd84a8790a2 100644 --- a/Documentation/userspace-api/media/dvb/fe_property_parameters.rst +++ b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _fe_property_parameters: diff --git a/Documentation/userspace-api/media/dvb/frontend-header.rst b/Documentation/userspace-api/media/dvb/frontend-header.rst index cf8e515e5e1f..77f403361432 100644 --- a/Documentation/userspace-api/media/dvb/frontend-header.rst +++ b/Documentation/userspace-api/media/dvb/frontend-header.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later Frontend uAPI data types ======================== diff --git a/Documentation/userspace-api/media/dvb/frontend-property-cable-systems.rst b/Documentation/userspace-api/media/dvb/frontend-property-cable-systems.rst index 56657a6ec6ff..92ef98964140 100644 --- a/Documentation/userspace-api/media/dvb/frontend-property-cable-systems.rst +++ b/Documentation/userspace-api/media/dvb/frontend-property-cable-systems.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _frontend-property-cable-systems: diff --git a/Documentation/userspace-api/media/dvb/frontend-property-satellite-systems.rst b/Documentation/userspace-api/media/dvb/frontend-property-satellite-systems.rst index e64fd625c476..13b344b286b3 100644 --- a/Documentation/userspace-api/media/dvb/frontend-property-satellite-systems.rst +++ b/Documentation/userspace-api/media/dvb/frontend-property-satellite-systems.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _frontend-property-satellite-systems: diff --git a/Documentation/userspace-api/media/dvb/frontend-property-terrestrial-systems.rst b/Documentation/userspace-api/media/dvb/frontend-property-terrestrial-systems.rst index 1079522b2425..8cd461ceeea7 100644 --- a/Documentation/userspace-api/media/dvb/frontend-property-terrestrial-systems.rst +++ b/Documentation/userspace-api/media/dvb/frontend-property-terrestrial-systems.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _frontend-property-terrestrial-systems: diff --git a/Documentation/userspace-api/media/dvb/frontend-stat-properties.rst b/Documentation/userspace-api/media/dvb/frontend-stat-properties.rst index ae6ed5128deb..223c1c56c9d3 100644 --- a/Documentation/userspace-api/media/dvb/frontend-stat-properties.rst +++ b/Documentation/userspace-api/media/dvb/frontend-stat-properties.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _frontend-stat-properties: diff --git a/Documentation/userspace-api/media/dvb/frontend.rst b/Documentation/userspace-api/media/dvb/frontend.rst index 41ad519ca502..1df68730f181 100644 --- a/Documentation/userspace-api/media/dvb/frontend.rst +++ b/Documentation/userspace-api/media/dvb/frontend.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dvb_frontend: diff --git a/Documentation/userspace-api/media/dvb/frontend_f_close.rst b/Documentation/userspace-api/media/dvb/frontend_f_close.rst index 582e19a83c1a..52c323a85014 100644 --- a/Documentation/userspace-api/media/dvb/frontend_f_close.rst +++ b/Documentation/userspace-api/media/dvb/frontend_f_close.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _frontend_f_close: @@ -18,7 +12,6 @@ Name fe-close - Close a frontend device - Synopsis ======== @@ -26,16 +19,13 @@ Synopsis #include <unistd.h> - .. c:function:: int close( int fd ) - :name: dvb-fe-close Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <dvb-fe-open>`. - + File descriptor returned by :c:func:`open()`. Description =========== @@ -44,7 +34,6 @@ This system call closes a previously opened front-end device. After closing a front-end device, its corresponding hardware might be powered down automatically. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/frontend_f_open.rst b/Documentation/userspace-api/media/dvb/frontend_f_open.rst index 0be3b249d33b..bb37eded0870 100644 --- a/Documentation/userspace-api/media/dvb/frontend_f_open.rst +++ b/Documentation/userspace-api/media/dvb/frontend_f_open.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.fe .. _frontend_f_open: @@ -18,7 +12,6 @@ Name fe-open - Open a frontend device - Synopsis ======== @@ -26,9 +19,7 @@ Synopsis #include <fcntl.h> - .. c:function:: int open( const char *device_name, int flags ) - :name: dvb-fe-open Arguments ========= @@ -51,7 +42,6 @@ Arguments Other flags have no effect. - Description =========== @@ -77,16 +67,14 @@ the specified mode. This implies that the corresponding hardware is powered up, and that other front-ends may have been powered down to make that possible. - Return Value ============ -On success :ref:`open() <frontend_f_open>` returns the new file descriptor. +On success :c:func:`open()` returns the new file descriptor. On error, -1 is returned, and the ``errno`` variable is set appropriately. Possible error codes are: - On success 0 is returned, and :c:type:`ca_slot_info` is filled. On error -1 is returned, and the ``errno`` variable is set @@ -112,6 +100,5 @@ appropriately. - The limit on the total number of files open on the system has been reached. - The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/userspace-api/media/dvb/frontend_fcalls.rst b/Documentation/userspace-api/media/dvb/frontend_fcalls.rst index 2b5e7a4dba9e..1df27b6e84f9 100644 --- a/Documentation/userspace-api/media/dvb/frontend_fcalls.rst +++ b/Documentation/userspace-api/media/dvb/frontend_fcalls.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _frontend_fcalls: diff --git a/Documentation/userspace-api/media/dvb/frontend_legacy_api.rst b/Documentation/userspace-api/media/dvb/frontend_legacy_api.rst index 1bd804f9b364..535828c002d6 100644 --- a/Documentation/userspace-api/media/dvb/frontend_legacy_api.rst +++ b/Documentation/userspace-api/media/dvb/frontend_legacy_api.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _frontend_legacy_types: diff --git a/Documentation/userspace-api/media/dvb/frontend_legacy_dvbv3_api.rst b/Documentation/userspace-api/media/dvb/frontend_legacy_dvbv3_api.rst index 29ad0f9b90a4..09de723c2c27 100644 --- a/Documentation/userspace-api/media/dvb/frontend_legacy_dvbv3_api.rst +++ b/Documentation/userspace-api/media/dvb/frontend_legacy_dvbv3_api.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _frontend_legacy_dvbv3_api: diff --git a/Documentation/userspace-api/media/dvb/headers.rst b/Documentation/userspace-api/media/dvb/headers.rst index ffd8f432484a..9743ffc35096 100644 --- a/Documentation/userspace-api/media/dvb/headers.rst +++ b/Documentation/userspace-api/media/dvb/headers.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later **************************** Digital TV uAPI header files diff --git a/Documentation/userspace-api/media/dvb/intro.rst b/Documentation/userspace-api/media/dvb/intro.rst index f1235ef4599e..a935f3914e56 100644 --- a/Documentation/userspace-api/media/dvb/intro.rst +++ b/Documentation/userspace-api/media/dvb/intro.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dvb_introdution: diff --git a/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst b/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst index 17c3b062afb3..6104879d728a 100644 --- a/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst +++ b/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _legacy_dvb_apis: diff --git a/Documentation/userspace-api/media/dvb/net-add-if.rst b/Documentation/userspace-api/media/dvb/net-add-if.rst index e75ec4d80a08..022b4c626249 100644 --- a/Documentation/userspace-api/media/dvb/net-add-if.rst +++ b/Documentation/userspace-api/media/dvb/net-add-if.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.net .. _NET_ADD_IF: @@ -18,24 +12,22 @@ Name NET_ADD_IF - Creates a new network interface for a given Packet ID. - Synopsis ======== -.. c:function:: int ioctl( int fd, NET_ADD_IF, struct dvb_net_if *net_if ) - :name: NET_ADD_IF +.. c:macro:: NET_ADD_IF +``int ioctl(int fd, NET_ADD_IF, struct dvb_net_if *net_if)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``net_if`` pointer to struct :c:type:`dvb_net_if` - Description =========== diff --git a/Documentation/userspace-api/media/dvb/net-get-if.rst b/Documentation/userspace-api/media/dvb/net-get-if.rst index c5421d9a8c0b..e99696c9db74 100644 --- a/Documentation/userspace-api/media/dvb/net-get-if.rst +++ b/Documentation/userspace-api/media/dvb/net-get-if.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.net .. _NET_GET_IF: @@ -18,24 +12,22 @@ Name NET_GET_IF - Read the configuration data of an interface created via - :ref:`NET_ADD_IF <net>`. - Synopsis ======== -.. c:function:: int ioctl( int fd, NET_GET_IF, struct dvb_net_if *net_if ) - :name: NET_GET_IF +.. c:macro:: NET_GET_IF +``int ioctl(int fd, NET_GET_IF, struct dvb_net_if *net_if)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``net_if`` pointer to struct :c:type:`dvb_net_if` - Description =========== @@ -46,7 +38,6 @@ encapsulation type used on such interface. If the interface was not created yet with :ref:`NET_ADD_IF <net>`, it will return -1 and fill the ``errno`` with ``EINVAL`` error code. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/net-remove-if.rst b/Documentation/userspace-api/media/dvb/net-remove-if.rst index d530559f66f1..ac88691c0423 100644 --- a/Documentation/userspace-api/media/dvb/net-remove-if.rst +++ b/Documentation/userspace-api/media/dvb/net-remove-if.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.net .. _NET_REMOVE_IF: @@ -18,31 +12,28 @@ Name NET_REMOVE_IF - Removes a network interface. - Synopsis ======== -.. c:function:: int ioctl( int fd, NET_REMOVE_IF, int ifnum ) - :name: NET_REMOVE_IF +.. c:macro:: NET_REMOVE_IF +``int ioctl(int fd, NET_REMOVE_IF, int ifnum)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <frontend_f_open>`. + File descriptor returned by :c:func:`open()`. ``net_if`` number of the interface to be removed - Description =========== The NET_REMOVE_IF ioctl deletes an interface previously created via :ref:`NET_ADD_IF <net>`. - Return Value ============ diff --git a/Documentation/userspace-api/media/dvb/net-types.rst b/Documentation/userspace-api/media/dvb/net-types.rst index 94323cffe8af..075264bc0394 100644 --- a/Documentation/userspace-api/media/dvb/net-types.rst +++ b/Documentation/userspace-api/media/dvb/net-types.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _net_types: diff --git a/Documentation/userspace-api/media/dvb/net.rst b/Documentation/userspace-api/media/dvb/net.rst index 084f33d1ba28..33368f5150c5 100644 --- a/Documentation/userspace-api/media/dvb/net.rst +++ b/Documentation/userspace-api/media/dvb/net.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _net: diff --git a/Documentation/userspace-api/media/dvb/query-dvb-frontend-info.rst b/Documentation/userspace-api/media/dvb/query-dvb-frontend-info.rst index d854ccf42ccf..f099b49357ed 100644 --- a/Documentation/userspace-api/media/dvb/query-dvb-frontend-info.rst +++ b/Documentation/userspace-api/media/dvb/query-dvb-frontend-info.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _query-dvb-frontend-info: diff --git a/Documentation/userspace-api/media/dvb/video-clear-buffer.rst b/Documentation/userspace-api/media/dvb/video-clear-buffer.rst index ba7a13302862..a7730559bbb2 100644 --- a/Documentation/userspace-api/media/dvb/video-clear-buffer.rst +++ b/Documentation/userspace-api/media/dvb/video-clear-buffer.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_CLEAR_BUFFER: @@ -23,9 +17,9 @@ VIDEO_CLEAR_BUFFER Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_CLEAR_BUFFER) - :name: VIDEO_CLEAR_BUFFER +.. c:macro:: VIDEO_CLEAR_BUFFER +``int ioctl(fd, VIDEO_CLEAR_BUFFER)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -47,14 +40,12 @@ Arguments - Equals VIDEO_CLEAR_BUFFER for this command. - Description ----------- This ioctl call clears all video buffers in the driver and in the decoder hardware. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-command.rst b/Documentation/userspace-api/media/dvb/video-command.rst index d96d764d0eef..cae9445eb3af 100644 --- a/Documentation/userspace-api/media/dvb/video-command.rst +++ b/Documentation/userspace-api/media/dvb/video-command.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_COMMAND: @@ -23,9 +17,9 @@ VIDEO_COMMAND Synopsis -------- -.. c:function:: int ioctl(int fd, VIDEO_COMMAND, struct video_command *cmd) - :name: VIDEO_COMMAND +.. c:macro:: VIDEO_COMMAND +``int ioctl(int fd, VIDEO_COMMAND, struct video_command *cmd)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - Commands the decoder. - Description ----------- @@ -66,7 +58,7 @@ subset of the ``v4l2_decoder_cmd`` struct, so refer to the :ref:`VIDIOC_DECODER_CMD` documentation for more information. -.. c:type:: struct video_command +.. c:type:: video_command .. code-block:: c @@ -96,7 +88,6 @@ more information. }; }; - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-continue.rst b/Documentation/userspace-api/media/dvb/video-continue.rst index bb18514ac5e9..bc34bf3989e4 100644 --- a/Documentation/userspace-api/media/dvb/video-continue.rst +++ b/Documentation/userspace-api/media/dvb/video-continue.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_CONTINUE: @@ -23,9 +17,9 @@ VIDEO_CONTINUE Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_CONTINUE) - :name: VIDEO_CONTINUE +.. c:macro:: VIDEO_CONTINUE +``int ioctl(fd, VIDEO_CONTINUE)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -47,7 +40,6 @@ Arguments - Equals VIDEO_CONTINUE for this command. - Description ----------- @@ -57,7 +49,6 @@ V4L2 :ref:`VIDIOC_DECODER_CMD` instead. This ioctl call restarts decoding and playing processes of the video stream which was played before a call to VIDEO_FREEZE was made. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-fast-forward.rst b/Documentation/userspace-api/media/dvb/video-fast-forward.rst index 1f6ec89574d1..e71fa8d6965b 100644 --- a/Documentation/userspace-api/media/dvb/video-fast-forward.rst +++ b/Documentation/userspace-api/media/dvb/video-fast-forward.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_FAST_FORWARD: @@ -23,9 +17,9 @@ VIDEO_FAST_FORWARD Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_FAST_FORWARD, int nFrames) - :name: VIDEO_FAST_FORWARD +.. c:macro:: VIDEO_FAST_FORWARD +``int ioctl(fd, VIDEO_FAST_FORWARD, int nFrames)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - The number of frames to skip. - Description ----------- @@ -61,7 +53,6 @@ This ioctl call asks the Video Device to skip decoding of N number of I-frames. This call can only be used if VIDEO_SOURCE_MEMORY is selected. - Return Value ------------ @@ -70,12 +61,10 @@ appropriately. The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. - .. flat-table:: :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EPERM`` diff --git a/Documentation/userspace-api/media/dvb/video-fclose.rst b/Documentation/userspace-api/media/dvb/video-fclose.rst index f9d2a8ebe4a4..01d24d548439 100644 --- a/Documentation/userspace-api/media/dvb/video-fclose.rst +++ b/Documentation/userspace-api/media/dvb/video-fclose.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _video_fclose: @@ -25,7 +19,6 @@ Synopsis .. c:function:: int close(int fd) - Arguments --------- @@ -33,20 +26,17 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd - File descriptor returned by a previous call to open(). - Description ----------- This system call closes a previously opened video device. - Return Value ------------ @@ -54,7 +44,6 @@ Return Value :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EBADF`` diff --git a/Documentation/userspace-api/media/dvb/video-fopen.rst b/Documentation/userspace-api/media/dvb/video-fopen.rst index a418cf6d772e..1371b083e4e8 100644 --- a/Documentation/userspace-api/media/dvb/video-fopen.rst +++ b/Documentation/userspace-api/media/dvb/video-fopen.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _video_fopen: @@ -25,7 +19,6 @@ Synopsis .. c:function:: int open(const char *deviceName, int flags) - Arguments --------- @@ -33,7 +26,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - const char \*deviceName @@ -66,7 +58,6 @@ Arguments - - (blocking mode is the default) - Description ----------- @@ -86,7 +77,6 @@ returned. If the Video Device is opened in O_RDONLY mode, the only ioctl call that can be used is VIDEO_GET_STATUS. All other call will return an error code. - Return Value ------------ @@ -96,7 +86,6 @@ Return Value :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``ENODEV`` diff --git a/Documentation/userspace-api/media/dvb/video-freeze.rst b/Documentation/userspace-api/media/dvb/video-freeze.rst index 46f287faa7fe..4321f257cb70 100644 --- a/Documentation/userspace-api/media/dvb/video-freeze.rst +++ b/Documentation/userspace-api/media/dvb/video-freeze.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_FREEZE: @@ -23,9 +17,9 @@ VIDEO_FREEZE Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_FREEZE) - :name: VIDEO_FREEZE +.. c:macro:: VIDEO_FREEZE +``int ioctl(fd, VIDEO_FREEZE)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -47,7 +40,6 @@ Arguments - Equals VIDEO_FREEZE for this command. - Description ----------- @@ -61,7 +53,6 @@ If VIDEO_SOURCE_MEMORY is selected in the ioctl call VIDEO_SELECT_SOURCE, the Digital TV subsystem will not decode any more data until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-fwrite.rst b/Documentation/userspace-api/media/dvb/video-fwrite.rst index 08dfafa9c6a1..a07fd7d7a40e 100644 --- a/Documentation/userspace-api/media/dvb/video-fwrite.rst +++ b/Documentation/userspace-api/media/dvb/video-fwrite.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _video_fwrite: @@ -25,7 +19,6 @@ Synopsis .. c:function:: size_t write(int fd, const void *buf, size_t count) - Arguments --------- @@ -33,7 +26,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -52,7 +44,6 @@ Arguments - Size of buf. - Description ----------- @@ -62,7 +53,6 @@ PES format, unless the capability allows other formats. If O_NONBLOCK is not specified the function will block until buffer space is available. The amount of data to be transferred is implied by count. - Return Value ------------ @@ -70,7 +60,6 @@ Return Value :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EPERM`` diff --git a/Documentation/userspace-api/media/dvb/video-get-capabilities.rst b/Documentation/userspace-api/media/dvb/video-get-capabilities.rst index f6f19df5a3b4..01e09f56656c 100644 --- a/Documentation/userspace-api/media/dvb/video-get-capabilities.rst +++ b/Documentation/userspace-api/media/dvb/video-get-capabilities.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_GET_CAPABILITIES: @@ -23,9 +17,9 @@ VIDEO_GET_CAPABILITIES Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_GET_CAPABILITIES, unsigned int *cap) - :name: VIDEO_GET_CAPABILITIES +.. c:macro:: VIDEO_GET_CAPABILITIES +``int ioctl(fd, VIDEO_GET_CAPABILITIES, unsigned int *cap)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - Pointer to a location where to store the capability information. - Description ----------- @@ -61,7 +53,6 @@ This ioctl call asks the video device about its decoding capabilities. On success it returns and integer which has bits set according to the defines in section ??. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-get-event.rst b/Documentation/userspace-api/media/dvb/video-get-event.rst index 6db8e6337c4f..90382bc36cfe 100644 --- a/Documentation/userspace-api/media/dvb/video-get-event.rst +++ b/Documentation/userspace-api/media/dvb/video-get-event.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_GET_EVENT: @@ -23,9 +17,9 @@ VIDEO_GET_EVENT Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_GET_EVENT, struct video_event *ev) - :name: VIDEO_GET_EVENT +.. c:macro:: VIDEO_GET_EVENT +``int ioctl(fd, VIDEO_GET_EVENT, struct video_event *ev)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - Points to the location where the event, if any, is to be stored. - Description ----------- @@ -100,7 +92,6 @@ appropriately. The generic error codes are described at the :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EWOULDBLOCK`` diff --git a/Documentation/userspace-api/media/dvb/video-get-frame-count.rst b/Documentation/userspace-api/media/dvb/video-get-frame-count.rst index 4152a42daeb3..b48ac8c58a41 100644 --- a/Documentation/userspace-api/media/dvb/video-get-frame-count.rst +++ b/Documentation/userspace-api/media/dvb/video-get-frame-count.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_GET_FRAME_COUNT: @@ -23,9 +17,9 @@ VIDEO_GET_FRAME_COUNT Synopsis -------- -.. c:function:: int ioctl(int fd, VIDEO_GET_FRAME_COUNT, __u64 *pts) - :name: VIDEO_GET_FRAME_COUNT +.. c:macro:: VIDEO_GET_FRAME_COUNT +``int ioctl(int fd, VIDEO_GET_FRAME_COUNT, __u64 *pts)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -54,7 +47,6 @@ Arguments - Returns the number of frames displayed since the decoder was started. - Description ----------- @@ -65,7 +57,6 @@ control. This ioctl call asks the Video Device to return the number of displayed frames since the decoder was started. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-get-pts.rst b/Documentation/userspace-api/media/dvb/video-get-pts.rst index f957df792ae1..fedaff41be0b 100644 --- a/Documentation/userspace-api/media/dvb/video-get-pts.rst +++ b/Documentation/userspace-api/media/dvb/video-get-pts.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_GET_PTS: @@ -23,9 +17,9 @@ VIDEO_GET_PTS Synopsis -------- -.. c:function:: int ioctl(int fd, VIDEO_GET_PTS, __u64 *pts) - :name: VIDEO_GET_PTS +.. c:macro:: VIDEO_GET_PTS +``int ioctl(int fd, VIDEO_GET_PTS, __u64 *pts)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -58,7 +51,6 @@ Arguments but may also be a value close to it like the PTS of the last decoded frame or the last PTS extracted by the PES parser. - Description ----------- @@ -69,7 +61,6 @@ control. This ioctl call asks the Video Device to return the current PTS timestamp. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-get-size.rst b/Documentation/userspace-api/media/dvb/video-get-size.rst index 376745550eb5..de34331c5bd1 100644 --- a/Documentation/userspace-api/media/dvb/video-get-size.rst +++ b/Documentation/userspace-api/media/dvb/video-get-size.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_GET_SIZE: @@ -23,9 +17,9 @@ VIDEO_GET_SIZE Synopsis -------- -.. c:function:: int ioctl(int fd, VIDEO_GET_SIZE, video_size_t *size) - :name: VIDEO_GET_SIZE +.. c:macro:: VIDEO_GET_SIZE +``int ioctl(int fd, VIDEO_GET_SIZE, video_size_t *size)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - Returns the size and aspect ratio. - Description ----------- @@ -69,7 +61,6 @@ This ioctl returns the size and aspect ratio. video_format_t aspect_ratio; } video_size_t; - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-get-status.rst b/Documentation/userspace-api/media/dvb/video-get-status.rst index d0172593e557..9b86fbf411d4 100644 --- a/Documentation/userspace-api/media/dvb/video-get-status.rst +++ b/Documentation/userspace-api/media/dvb/video-get-status.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_GET_STATUS: @@ -23,9 +17,9 @@ VIDEO_GET_STATUS Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_GET_STATUS, struct video_status *status) - :name: VIDEO_GET_STATUS +.. c:macro:: VIDEO_GET_STATUS +``int ioctl(fd, VIDEO_GET_STATUS, struct video_status *status)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - Returns the current status of the Video Device. - Description ----------- diff --git a/Documentation/userspace-api/media/dvb/video-play.rst b/Documentation/userspace-api/media/dvb/video-play.rst index 2b6b4e93bd93..35ac8b98fdbf 100644 --- a/Documentation/userspace-api/media/dvb/video-play.rst +++ b/Documentation/userspace-api/media/dvb/video-play.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_PLAY: @@ -23,9 +17,9 @@ VIDEO_PLAY Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_PLAY) - :name: VIDEO_PLAY +.. c:macro:: VIDEO_PLAY +``int ioctl(fd, VIDEO_PLAY)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -47,7 +40,6 @@ Arguments - Equals VIDEO_PLAY for this command. - Description ----------- @@ -57,7 +49,6 @@ V4L2 :ref:`VIDIOC_DECODER_CMD` instead. This ioctl call asks the Video Device to start playing a video stream from the selected source. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-select-source.rst b/Documentation/userspace-api/media/dvb/video-select-source.rst index 504f768da00c..929a20985d53 100644 --- a/Documentation/userspace-api/media/dvb/video-select-source.rst +++ b/Documentation/userspace-api/media/dvb/video-select-source.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_SELECT_SOURCE: @@ -23,9 +17,9 @@ VIDEO_SELECT_SOURCE Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_SELECT_SOURCE, video_stream_source_t source) - :name: VIDEO_SELECT_SOURCE +.. c:macro:: VIDEO_SELECT_SOURCE +``int ioctl(fd, VIDEO_SELECT_SOURCE, video_stream_source_t source)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - Indicates which source shall be used for the Video stream. - Description ----------- diff --git a/Documentation/userspace-api/media/dvb/video-set-blank.rst b/Documentation/userspace-api/media/dvb/video-set-blank.rst index a2608df94d3e..70249a6ba125 100644 --- a/Documentation/userspace-api/media/dvb/video-set-blank.rst +++ b/Documentation/userspace-api/media/dvb/video-set-blank.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_SET_BLANK: @@ -23,9 +17,9 @@ VIDEO_SET_BLANK Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_SET_BLANK, boolean mode) - :name: VIDEO_SET_BLANK +.. c:macro:: VIDEO_SET_BLANK +``int ioctl(fd, VIDEO_SET_BLANK, boolean mode)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -58,13 +51,11 @@ Arguments - - FALSE: Show last decoded frame. - Description ----------- This ioctl call asks the Video Device to blank out the picture. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-set-display-format.rst b/Documentation/userspace-api/media/dvb/video-set-display-format.rst index c587b3d15e30..1de4f40ae732 100644 --- a/Documentation/userspace-api/media/dvb/video-set-display-format.rst +++ b/Documentation/userspace-api/media/dvb/video-set-display-format.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_SET_DISPLAY_FORMAT: @@ -23,9 +17,9 @@ VIDEO_SET_DISPLAY_FORMAT Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_SET_DISPLAY_FORMAT) - :name: VIDEO_SET_DISPLAY_FORMAT +.. c:macro:: VIDEO_SET_DISPLAY_FORMAT +``int ioctl(fd, VIDEO_SET_DISPLAY_FORMAT)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,14 +46,12 @@ Arguments - Selects the video format to be used. - Description ----------- This ioctl call asks the Video Device to select the video format to be applied by the MPEG chip on the video. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-set-format.rst b/Documentation/userspace-api/media/dvb/video-set-format.rst index ced74edb74eb..bb64e37ae081 100644 --- a/Documentation/userspace-api/media/dvb/video-set-format.rst +++ b/Documentation/userspace-api/media/dvb/video-set-format.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_SET_FORMAT: @@ -23,9 +17,9 @@ VIDEO_SET_FORMAT Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_SET_FORMAT, video_format_t format) - :name: VIDEO_SET_FORMAT +.. c:macro:: VIDEO_SET_FORMAT +``int ioctl(fd, VIDEO_SET_FORMAT, video_format_t format)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - video format of TV as defined in section ??. - Description ----------- @@ -79,12 +71,10 @@ appropriately. The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. - .. flat-table:: :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EINVAL`` diff --git a/Documentation/userspace-api/media/dvb/video-set-streamtype.rst b/Documentation/userspace-api/media/dvb/video-set-streamtype.rst index 1729bc04e4f7..1f31c048bdbc 100644 --- a/Documentation/userspace-api/media/dvb/video-set-streamtype.rst +++ b/Documentation/userspace-api/media/dvb/video-set-streamtype.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_SET_STREAMTYPE: @@ -23,9 +17,9 @@ VIDEO_SET_STREAMTYPE Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_SET_STREAMTYPE, int type) - :name: VIDEO_SET_STREAMTYPE +.. c:macro:: VIDEO_SET_STREAMTYPE +``int ioctl(fd, VIDEO_SET_STREAMTYPE, int type)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - stream type - Description ----------- @@ -61,7 +53,6 @@ This ioctl tells the driver which kind of stream to expect being written to it. If this call is not used the default of video PES is used. Some drivers might not support this call and always expect PES. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-slowmotion.rst b/Documentation/userspace-api/media/dvb/video-slowmotion.rst index b8cfba7bbfb3..1478fcc30cb8 100644 --- a/Documentation/userspace-api/media/dvb/video-slowmotion.rst +++ b/Documentation/userspace-api/media/dvb/video-slowmotion.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_SLOWMOTION: @@ -23,9 +17,9 @@ VIDEO_SLOWMOTION Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_SLOWMOTION, int nFrames) - :name: VIDEO_SLOWMOTION +.. c:macro:: VIDEO_SLOWMOTION +``int ioctl(fd, VIDEO_SLOWMOTION, int nFrames)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - The number of times to repeat each frame. - Description ----------- @@ -61,7 +53,6 @@ This ioctl call asks the video device to repeat decoding frames N number of times. This call can only be used if VIDEO_SOURCE_MEMORY is selected. - Return Value ------------ @@ -70,12 +61,10 @@ appropriately. The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. - .. flat-table:: :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``EPERM`` diff --git a/Documentation/userspace-api/media/dvb/video-stillpicture.rst b/Documentation/userspace-api/media/dvb/video-stillpicture.rst index 5432619a63a1..d25384222a20 100644 --- a/Documentation/userspace-api/media/dvb/video-stillpicture.rst +++ b/Documentation/userspace-api/media/dvb/video-stillpicture.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_STILLPICTURE: @@ -23,9 +17,9 @@ VIDEO_STILLPICTURE Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_STILLPICTURE, struct video_still_picture *sp) - :name: VIDEO_STILLPICTURE +.. c:macro:: VIDEO_STILLPICTURE +``int ioctl(fd, VIDEO_STILLPICTURE, struct video_still_picture *sp)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - Pointer to a location where an I-frame and size is stored. - Description ----------- @@ -61,7 +53,6 @@ This ioctl call asks the Video Device to display a still picture (I-frame). The input data shall contain an I-frame. If the pointer is NULL, then the current displayed still picture is blanked. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-stop.rst b/Documentation/userspace-api/media/dvb/video-stop.rst index 9a53fe7f2fd0..96f61c5b48a2 100644 --- a/Documentation/userspace-api/media/dvb/video-stop.rst +++ b/Documentation/userspace-api/media/dvb/video-stop.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_STOP: @@ -23,9 +17,9 @@ VIDEO_STOP Synopsis -------- -.. c:function:: int ioctl(fd, VIDEO_STOP, boolean mode) - :name: VIDEO_STOP +.. c:macro:: VIDEO_STOP +``int ioctl(fd, VIDEO_STOP, boolean mode)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -63,7 +56,6 @@ Arguments - - FALSE: Show last decoded frame. - Description ----------- @@ -74,7 +66,6 @@ This ioctl call asks the Video Device to stop playing the current stream. Depending on the input parameter, the screen can be blanked out or displaying the last decoded frame. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video-try-command.rst b/Documentation/userspace-api/media/dvb/video-try-command.rst index 61667952030f..79bf3dfb8a32 100644 --- a/Documentation/userspace-api/media/dvb/video-try-command.rst +++ b/Documentation/userspace-api/media/dvb/video-try-command.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.video .. _VIDEO_TRY_COMMAND: @@ -23,9 +17,9 @@ VIDEO_TRY_COMMAND Synopsis -------- -.. c:function:: int ioctl(int fd, VIDEO_TRY_COMMAND, struct video_command *cmd) - :name: VIDEO_TRY_COMMAND +.. c:macro:: VIDEO_TRY_COMMAND +``int ioctl(int fd, VIDEO_TRY_COMMAND, struct video_command *cmd)`` Arguments --------- @@ -34,7 +28,6 @@ Arguments :header-rows: 0 :stub-columns: 0 - - .. row 1 - int fd @@ -53,7 +46,6 @@ Arguments - Try a decoder command. - Description ----------- @@ -66,7 +58,6 @@ subset of the ``v4l2_decoder_cmd`` struct, so refer to the :ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` documentation for more information. - Return Value ------------ diff --git a/Documentation/userspace-api/media/dvb/video.rst b/Documentation/userspace-api/media/dvb/video.rst index 537eae1b0723..3ed1bbfb93c3 100644 --- a/Documentation/userspace-api/media/dvb/video.rst +++ b/Documentation/userspace-api/media/dvb/video.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dvb_video: diff --git a/Documentation/userspace-api/media/dvb/video_function_calls.rst b/Documentation/userspace-api/media/dvb/video_function_calls.rst index 4902a40d65ba..20a897be5dca 100644 --- a/Documentation/userspace-api/media/dvb/video_function_calls.rst +++ b/Documentation/userspace-api/media/dvb/video_function_calls.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _video_function_calls: diff --git a/Documentation/userspace-api/media/dvb/video_types.rst b/Documentation/userspace-api/media/dvb/video_types.rst index bdba1d48f647..c4557d328b7a 100644 --- a/Documentation/userspace-api/media/dvb/video_types.rst +++ b/Documentation/userspace-api/media/dvb/video_types.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _video_types: diff --git a/Documentation/userspace-api/media/fdl-appendix.rst b/Documentation/userspace-api/media/fdl-appendix.rst index 70c8cda10814..683ebed87017 100644 --- a/Documentation/userspace-api/media/fdl-appendix.rst +++ b/Documentation/userspace-api/media/fdl-appendix.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _fdl: diff --git a/Documentation/userspace-api/media/gen-errors.rst b/Documentation/userspace-api/media/gen-errors.rst index abae4dbed549..e595d0bea109 100644 --- a/Documentation/userspace-api/media/gen-errors.rst +++ b/Documentation/userspace-api/media/gen-errors.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _gen_errors: diff --git a/Documentation/userspace-api/media/glossary.rst b/Documentation/userspace-api/media/glossary.rst new file mode 100644 index 000000000000..cb165d7176b7 --- /dev/null +++ b/Documentation/userspace-api/media/glossary.rst @@ -0,0 +1,205 @@ +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later + +======== +Glossary +======== + +.. note:: + + The goal of this section is to standardize the terms used within the media + userspace API documentation. This is Work In Progress. + +.. Please keep the glossary entries in alphabetical order + +.. glossary:: + + Bridge Driver + A :term:`Device Driver` that implements the main logic to talk with + media hardware. + + CEC API + **Consumer Electronics Control API** + + An API designed to receive and transmit data via an HDMI + CEC interface. + + See :ref:`cec`. + + Device Driver + Part of the Linux Kernel that implements support for a hardware + component. + + Device Node + A character device node in the file system used to control and + transfer data in and out of a Kernel driver. + + Digital TV API + **Previously known as DVB API** + + An API designed to control a subset of the :term:`Media Hardware` + that implements digital TV (e. g. DVB, ATSC, ISDB, etc). + + See :ref:`dvbapi`. + + DSP + **Digital Signal Processor** + + A specialized :term:`Microprocessor`, with its architecture + optimized for the operational needs of digital signal processing. + + FPGA + **Field-programmable Gate Array** + + An :term:`IC` circuit designed to be configured by a customer or + a designer after manufacturing. + + See https://en.wikipedia.org/wiki/Field-programmable_gate_array. + + Hardware Component + A subset of the :term:`Media Hardware`. For example an :term:`I²C` or + :term:`SPI` device, or an :term:`IP Block` inside an + :term:`SoC` or :term:`FPGA`. + + Hardware Peripheral + A group of :term:`hardware components <Hardware Component>` that + together make a larger user-facing functional peripheral. For + instance, the :term:`SoC` :term:`ISP` :term:`IP Block` + and the external camera sensors together make a camera hardware + peripheral. + + Also known as :term:`Peripheral`. + + I²C + **Inter-Integrated Circuit** + + A multi-master, multi-slave, packet switched, single-ended, + serial computer bus used to control some hardware components + like sub-device hardware components. + + See http://www.nxp.com/docs/en/user-guide/UM10204.pdf. + + IC + **Integrated circuit** + + A set of electronic circuits on one small flat piece of + semiconductor material, normally silicon. + + Also known as chip. + + IP Block + **Intellectual property core** + + In electronic design a semiconductor intellectual property core, + is a reusable unit of logic, cell, or integrated circuit layout + design that is the intellectual property of one party. + IP Blocks may be licensed to another party or can be owned + and used by a single party alone. + + See https://en.wikipedia.org/wiki/Semiconductor_intellectual_property_core). + + ISP + **Image Signal Processor** + + A specialized processor that implements a set of algorithms for + processing image data. ISPs may implement algorithms for lens + shading correction, demosaicing, scaling and pixel format conversion + as well as produce statistics for the use of the control + algorithms (e.g. automatic exposure, white balance and focus). + + Media API + A set of userspace APIs used to control the media hardware. It is + composed by: + + - :term:`CEC API`; + - :term:`Digital TV API`; + - :term:`MC API`; + - :term:`RC API`; and + - :term:`V4L2 API`. + + See :doc:`index`. + + MC API + **Media Controller API** + + An API designed to expose and control the relationships between + multimedia devices and sub-devices. + + See :ref:`media_controller`. + + MC-centric + :term:`V4L2 Hardware` device driver that requires :term:`MC API`. + + Such drivers have ``V4L2_CAP_IO_MC`` device_caps field set + (see :ref:`VIDIOC_QUERYCAP`). + + See :ref:`v4l2_hardware_control` for more details. + + Media Hardware + Subset of the hardware that is supported by the Linux Media API. + + This includes audio and video capture and playback hardware, + digital and analog TV, camera sensors, ISPs, remote controllers, + codecs, HDMI Consumer Electronics Control, HDMI capture, etc. + + Microprocessor + Electronic circuitry that carries out the instructions of a + computer program by performing the basic arithmetic, logical, + control and input/output (I/O) operations specified by the + instructions on a single integrated circuit. + + Peripheral + The same as :term:`Hardware Peripheral`. + + RC API + **Remote Controller API** + + An API designed to receive and transmit data from remote + controllers. + + See :ref:`remote_controllers`. + + SMBus + A subset of I²C, which defines a stricter usage of the bus. + + SPI + **Serial Peripheral Interface Bus** + + Synchronous serial communication interface specification used for + short distance communication, primarily in embedded systems. + + SoC + **System on a Chip** + + An integrated circuit that integrates all components of a computer + or other electronic systems. + + V4L2 API + **V4L2 userspace API** + + The userspace API defined in :ref:`v4l2spec`, which is used to + control a V4L2 hardware. + + V4L2 Device Node + A :term:`Device Node` that is associated to a V4L driver. + + The V4L2 device node naming is specified at :ref:`v4l2_device_naming`. + + V4L2 Hardware + Part of the media hardware which is supported by the :term:`V4L2 API`. + + V4L2 Sub-device + V4L2 hardware components that aren't controlled by a + :term:`Bridge Driver`. See :ref:`subdev`. + + Video-node-centric + V4L2 device driver that doesn't require a media controller to be used. + + Such drivers have the ``V4L2_CAP_IO_MC`` device_caps field unset + (see :ref:`VIDIOC_QUERYCAP`). + + V4L2 Sub-device API + Part of the :term:`V4L2 API` which control + :term:`V4L2 sub-devices <V4L2 Sub-device>`, like sensors, + HDMI receivers, scalers, deinterlacers. + + See :ref:`v4l2_hardware_control` for more details. diff --git a/Documentation/userspace-api/media/index.rst b/Documentation/userspace-api/media/index.rst index 70a3f3d73698..7f42f83b9f59 100644 --- a/Documentation/userspace-api/media/index.rst +++ b/Documentation/userspace-api/media/index.rst @@ -35,6 +35,9 @@ Please see: mediactl/media-controller cec/cec-api gen-errors + + glossary + fdl-appendix drivers/index diff --git a/Documentation/userspace-api/media/mediactl/media-controller-intro.rst b/Documentation/userspace-api/media/mediactl/media-controller-intro.rst index 1d06ea4c4d09..fce7eafc37c4 100644 --- a/Documentation/userspace-api/media/mediactl/media-controller-intro.rst +++ b/Documentation/userspace-api/media/mediactl/media-controller-intro.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _media-controller-intro: diff --git a/Documentation/userspace-api/media/mediactl/media-controller-model.rst b/Documentation/userspace-api/media/mediactl/media-controller-model.rst index 865e73d934d6..222cb99debb5 100644 --- a/Documentation/userspace-api/media/mediactl/media-controller-model.rst +++ b/Documentation/userspace-api/media/mediactl/media-controller-model.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _media-controller-model: diff --git a/Documentation/userspace-api/media/mediactl/media-controller.rst b/Documentation/userspace-api/media/mediactl/media-controller.rst index 16bc3ab180d3..508dd693bf6c 100644 --- a/Documentation/userspace-api/media/mediactl/media-controller.rst +++ b/Documentation/userspace-api/media/mediactl/media-controller.rst @@ -1,12 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections - +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. include:: <isonum.txt> .. _media_controller: diff --git a/Documentation/userspace-api/media/mediactl/media-func-close.rst b/Documentation/userspace-api/media/mediactl/media-func-close.rst index ceec61c9e7c5..8ac2443e76c1 100644 --- a/Documentation/userspace-api/media/mediactl/media-func-close.rst +++ b/Documentation/userspace-api/media/mediactl/media-func-close.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media-func-close: @@ -18,7 +12,6 @@ Name media-close - Close a media device - Synopsis ======== @@ -26,16 +19,13 @@ Synopsis #include <unistd.h> - .. c:function:: int close( int fd ) - :name: mc-close Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <mc-open>`. - + File descriptor returned by :c:func:`open()`. Description =========== @@ -43,11 +33,10 @@ Description Closes the media device. Resources associated with the file descriptor are freed. The device configuration remain unchanged. - Return Value ============ -:ref:`close() <media-func-close>` returns 0 on success. On error, -1 is returned, and +:c:func:`close()` returns 0 on success. On error, -1 is returned, and ``errno`` is set appropriately. Possible error codes are: EBADF diff --git a/Documentation/userspace-api/media/mediactl/media-func-ioctl.rst b/Documentation/userspace-api/media/mediactl/media-func-ioctl.rst index 629e7be7c5be..9e9a838f4795 100644 --- a/Documentation/userspace-api/media/mediactl/media-func-ioctl.rst +++ b/Documentation/userspace-api/media/mediactl/media-func-ioctl.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media-func-ioctl: @@ -18,7 +12,6 @@ Name media-ioctl - Control a media device - Synopsis ======== @@ -26,15 +19,13 @@ Synopsis #include <sys/ioctl.h> - -.. c:function:: int ioctl( int fd, int request, void *argp ) - :name: mc-ioctl +``int ioctl(int fd, int request, void *argp)`` Arguments ========= ``fd`` - File descriptor returned by :c:func:`open() <mc-open>`. + File descriptor returned by :c:func:`open()`. ``request`` Media ioctl request code as defined in the media.h header file, for @@ -43,7 +34,6 @@ Arguments ``argp`` Pointer to a request-specific structure. - Description =========== @@ -59,7 +49,6 @@ their parameters are located in the media.h header file. All media ioctl requests, their respective function and parameters are specified in :ref:`media-user-func`. - Return Value ============ diff --git a/Documentation/userspace-api/media/mediactl/media-func-open.rst b/Documentation/userspace-api/media/mediactl/media-func-open.rst index 4ade1cc5048f..24487cb0a308 100644 --- a/Documentation/userspace-api/media/mediactl/media-func-open.rst +++ b/Documentation/userspace-api/media/mediactl/media-func-open.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media-func-open: @@ -18,7 +12,6 @@ Name media-open - Open a media device - Synopsis ======== @@ -26,9 +19,7 @@ Synopsis #include <fcntl.h> - .. c:function:: int open( const char *device_name, int flags ) - :name: mc-open Arguments ========= @@ -40,11 +31,10 @@ Arguments Open flags. Access mode must be either ``O_RDONLY`` or ``O_RDWR``. Other flags have no effect. - Description =========== -To open a media device applications call :ref:`open() <media-func-open>` with the +To open a media device applications call :c:func:`open()` with the desired device name. The function has no side effects; the device configuration remain unchanged. @@ -52,11 +42,10 @@ When the device is opened in read-only mode, attempts to modify its configuration will result in an error, and ``errno`` will be set to EBADF. - Return Value ============ -:ref:`open() <func-open>` returns the new file descriptor on success. On error, +:c:func:`open()` returns the new file descriptor on success. On error, -1 is returned, and ``errno`` is set appropriately. Possible error codes are: diff --git a/Documentation/userspace-api/media/mediactl/media-funcs.rst b/Documentation/userspace-api/media/mediactl/media-funcs.rst index 085e80e7fbd5..e896296812c1 100644 --- a/Documentation/userspace-api/media/mediactl/media-funcs.rst +++ b/Documentation/userspace-api/media/mediactl/media-funcs.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _media-user-func: diff --git a/Documentation/userspace-api/media/mediactl/media-header.rst b/Documentation/userspace-api/media/mediactl/media-header.rst index 7ff9d24ce65f..c674271c93f5 100644 --- a/Documentation/userspace-api/media/mediactl/media-header.rst +++ b/Documentation/userspace-api/media/mediactl/media-header.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _media_header: diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst b/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst index 9c729bdc8e85..0c4c5d2cfcb2 100644 --- a/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst +++ b/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media_ioc_device_info: @@ -18,24 +12,22 @@ Name MEDIA_IOC_DEVICE_INFO - Query device information - Synopsis ======== -.. c:function:: int ioctl( int fd, MEDIA_IOC_DEVICE_INFO, struct media_device_info *argp ) - :name: MEDIA_IOC_DEVICE_INFO +.. c:macro:: MEDIA_IOC_DEVICE_INFO +``int ioctl(int fd, MEDIA_IOC_DEVICE_INFO, struct media_device_info *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <media-func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`media_device_info`. - Description =========== @@ -45,7 +37,6 @@ a struct :c:type:`media_device_info`. The driver fills the structure and returns the information to the application. The ioctl never fails. - .. c:type:: media_device_info .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -55,7 +46,6 @@ ioctl never fails. :stub-columns: 0 :widths: 1 1 2 - * - char - ``driver``\ [16] - Name of the driver implementing the media API as a NUL-terminated @@ -101,7 +91,6 @@ ioctl never fails. - Reserved for future extensions. Drivers and applications must set this array to zero. - The ``serial`` and ``bus_info`` fields can be used to distinguish between multiple instances of otherwise identical hardware. The serial number takes precedence when provided and can be assumed to be unique. @@ -109,7 +98,6 @@ If the serial number is an empty string, the ``bus_info`` field can be used instead. The ``bus_info`` field is guaranteed to be unique, but can vary across reboots or device unplug/replug. - Return Value ============ diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst b/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst index 1d01de8e0f97..92dd8ecd538c 100644 --- a/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst +++ b/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media_ioc_enum_entities: @@ -18,24 +12,22 @@ Name MEDIA_IOC_ENUM_ENTITIES - Enumerate entities and their properties - Synopsis ======== -.. c:function:: int ioctl( int fd, MEDIA_IOC_ENUM_ENTITIES, struct media_entity_desc *argp ) - :name: MEDIA_IOC_ENUM_ENTITIES +.. c:macro:: MEDIA_IOC_ENUM_ENTITIES +``int ioctl(int fd, MEDIA_IOC_ENUM_ENTITIES, struct media_entity_desc *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <media-func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`media_entity_desc`. - Description =========== @@ -56,7 +48,6 @@ Entity IDs can be non-contiguous. Applications must *not* try to enumerate entities by calling MEDIA_IOC_ENUM_ENTITIES with increasing id's until they get an error. - .. c:type:: media_entity_desc .. tabularcolumns:: |p{1.5cm}|p{1.7cm}|p{1.6cm}|p{1.5cm}|p{11.2cm}| @@ -143,7 +134,6 @@ id's until they get an error. * - } - - Return Value ============ diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst b/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst index 9929b639db97..3bc98a6a2ec5 100644 --- a/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst +++ b/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media_ioc_enum_links: @@ -18,24 +12,22 @@ Name MEDIA_IOC_ENUM_LINKS - Enumerate all pads and links for a given entity - Synopsis ======== -.. c:function:: int ioctl( int fd, MEDIA_IOC_ENUM_LINKS, struct media_links_enum *argp ) - :name: MEDIA_IOC_ENUM_LINKS +.. c:macro:: MEDIA_IOC_ENUM_LINKS +``int ioctl(int fd, MEDIA_IOC_ENUM_LINKS, struct media_links_enum *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <media-func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`media_links_enum`. - Description =========== @@ -60,7 +52,6 @@ outbound links can be retrieved with :ref:`MEDIA_IOC_ENUM_ENTITIES`. Only forward links that originate at one of the entity's source pads are returned during the enumeration process. - .. c:type:: media_links_enum .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -89,7 +80,6 @@ returned during the enumeration process. - Reserved for future extensions. Drivers and applications must set the array to zero. - .. c:type:: media_pad_desc .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -117,7 +107,6 @@ returned during the enumeration process. the array to zero. - .. c:type:: media_link_desc .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -144,7 +133,6 @@ returned during the enumeration process. - Reserved for future extensions. Drivers and applications must set the array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst b/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst index 54e3112a3b5a..8f8b3b586edd 100644 --- a/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst +++ b/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media_ioc_g_topology: @@ -18,24 +12,22 @@ Name MEDIA_IOC_G_TOPOLOGY - Enumerate the graph topology and graph element properties - Synopsis ======== -.. c:function:: int ioctl( int fd, MEDIA_IOC_G_TOPOLOGY, struct media_v2_topology *argp ) - :name: MEDIA_IOC_G_TOPOLOGY +.. c:macro:: MEDIA_IOC_G_TOPOLOGY +``int ioctl(int fd, MEDIA_IOC_G_TOPOLOGY, struct media_v2_topology *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <media-func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`media_v2_topology`. - Description =========== @@ -127,7 +119,6 @@ desired arrays with the media graph elements. converted to a 64-bits integer. It can be zero. if zero, the ioctl won't store the links. It will just update ``num_links`` - .. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}| .. c:type:: media_v2_entity @@ -165,7 +156,6 @@ desired arrays with the media graph elements. - Reserved for future extensions. Drivers and applications must set this array to zero. - .. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}| .. c:type:: media_v2_interface @@ -199,7 +189,6 @@ desired arrays with the media graph elements. - Used only for device node interfaces. See :c:type:`media_v2_intf_devnode` for details. - .. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}| .. c:type:: media_v2_intf_devnode @@ -252,7 +241,6 @@ desired arrays with the media graph elements. - Reserved for future extensions. Drivers and applications must set this array to zero. - .. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}| .. c:type:: media_v2_link @@ -289,7 +277,6 @@ desired arrays with the media graph elements. - Reserved for future extensions. Drivers and applications must set this array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-request-alloc.rst b/Documentation/userspace-api/media/mediactl/media-ioc-request-alloc.rst index 82f86466c7f2..9195b4b8bf20 100644 --- a/Documentation/userspace-api/media/mediactl/media-ioc-request-alloc.rst +++ b/Documentation/userspace-api/media/mediactl/media-ioc-request-alloc.rst @@ -1,28 +1,5 @@ -.. This file is dual-licensed: you can use it either under the terms -.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this -.. dual licensing only applies to this file, and not this project as a -.. whole. -.. -.. a) This file is free software; you can redistribute it and/or -.. modify it under the terms of the GNU General Public License as -.. published by the Free Software Foundation version 2 of -.. the License. -.. -.. This file is distributed in the hope that it will be useful, -.. but WITHOUT ANY WARRANTY; without even the implied warranty of -.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.. GNU General Public License for more details. -.. -.. Or, alternatively, -.. -.. b) Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media_ioc_request_alloc: @@ -35,24 +12,22 @@ Name MEDIA_IOC_REQUEST_ALLOC - Allocate a request - Synopsis ======== -.. c:function:: int ioctl( int fd, MEDIA_IOC_REQUEST_ALLOC, int *argp ) - :name: MEDIA_IOC_REQUEST_ALLOC +.. c:macro:: MEDIA_IOC_REQUEST_ALLOC +``int ioctl(int fd, MEDIA_IOC_REQUEST_ALLOC, int *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <media-func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to an integer. - Description =========== @@ -75,7 +50,7 @@ Finally, the file descriptor can be :ref:`polled <request-func-poll>` to wait for the request to complete. The request will remain allocated until all the file descriptors associated -with it are closed by :ref:`close() <request-func-close>` and the driver no +with it are closed by :c:func:`close()` and the driver no longer uses the request internally. See also :ref:`here <media-request-life-time>` for more information. diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-setup-link.rst b/Documentation/userspace-api/media/mediactl/media-ioc-setup-link.rst index 7da3d0028285..23208300cb61 100644 --- a/Documentation/userspace-api/media/mediactl/media-ioc-setup-link.rst +++ b/Documentation/userspace-api/media/mediactl/media-ioc-setup-link.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media_ioc_setup_link: @@ -18,24 +12,22 @@ Name MEDIA_IOC_SETUP_LINK - Modify the properties of a link - Synopsis ======== -.. c:function:: int ioctl( int fd, MEDIA_IOC_SETUP_LINK, struct media_link_desc *argp ) - :name: MEDIA_IOC_SETUP_LINK +.. c:macro:: MEDIA_IOC_SETUP_LINK +``int ioctl(int fd, MEDIA_IOC_SETUP_LINK, struct media_link_desc *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <media-func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`media_link_desc`. - Description =========== @@ -60,7 +52,6 @@ non-dynamic link will return an ``EBUSY`` error code. If the specified link can't be found the driver returns with an ``EINVAL`` error code. - Return Value ============ diff --git a/Documentation/userspace-api/media/mediactl/media-request-ioc-queue.rst b/Documentation/userspace-api/media/mediactl/media-request-ioc-queue.rst index ad55b6b32616..04b33db2bb45 100644 --- a/Documentation/userspace-api/media/mediactl/media-request-ioc-queue.rst +++ b/Documentation/userspace-api/media/mediactl/media-request-ioc-queue.rst @@ -1,28 +1,5 @@ -.. This file is dual-licensed: you can use it either under the terms -.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this -.. dual licensing only applies to this file, and not this project as a -.. whole. -.. -.. a) This file is free software; you can redistribute it and/or -.. modify it under the terms of the GNU General Public License as -.. published by the Free Software Foundation version 2 of -.. the License. -.. -.. This file is distributed in the hope that it will be useful, -.. but WITHOUT ANY WARRANTY; without even the implied warranty of -.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.. GNU General Public License for more details. -.. -.. Or, alternatively, -.. -.. b) Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media_request_ioc_queue: @@ -35,13 +12,12 @@ Name MEDIA_REQUEST_IOC_QUEUE - Queue a request - Synopsis ======== -.. c:function:: int ioctl( int request_fd, MEDIA_REQUEST_IOC_QUEUE ) - :name: MEDIA_REQUEST_IOC_QUEUE +.. c:macro:: MEDIA_REQUEST_IOC_QUEUE +``int ioctl(int request_fd, MEDIA_REQUEST_IOC_QUEUE)`` Arguments ========= @@ -49,7 +25,6 @@ Arguments ``request_fd`` File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`. - Description =========== diff --git a/Documentation/userspace-api/media/mediactl/media-request-ioc-reinit.rst b/Documentation/userspace-api/media/mediactl/media-request-ioc-reinit.rst index 4c43fa05c8f6..57567b87b985 100644 --- a/Documentation/userspace-api/media/mediactl/media-request-ioc-reinit.rst +++ b/Documentation/userspace-api/media/mediactl/media-request-ioc-reinit.rst @@ -1,28 +1,5 @@ -.. This file is dual-licensed: you can use it either under the terms -.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this -.. dual licensing only applies to this file, and not this project as a -.. whole. -.. -.. a) This file is free software; you can redistribute it and/or -.. modify it under the terms of the GNU General Public License as -.. published by the Free Software Foundation version 2 of -.. the License. -.. -.. This file is distributed in the hope that it will be useful, -.. but WITHOUT ANY WARRANTY; without even the implied warranty of -.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.. GNU General Public License for more details. -.. -.. Or, alternatively, -.. -.. b) Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media_request_ioc_reinit: @@ -35,13 +12,12 @@ Name MEDIA_REQUEST_IOC_REINIT - Re-initialize a request - Synopsis ======== -.. c:function:: int ioctl( int request_fd, MEDIA_REQUEST_IOC_REINIT ) - :name: MEDIA_REQUEST_IOC_REINIT +.. c:macro:: MEDIA_REQUEST_IOC_REINIT +``int ioctl(int request_fd, MEDIA_REQUEST_IOC_REINIT)`` Arguments ========= @@ -57,7 +33,7 @@ this request ioctl can be used to re-initialize a previously allocated request. Re-initializing a request will clear any existing data from the request. -This avoids having to :ref:`close() <request-func-close>` a completed +This avoids having to :c:func:`close()` a completed request and allocate a new request. Instead the completed request can just be re-initialized and it is ready to be used again. diff --git a/Documentation/userspace-api/media/mediactl/media-types.rst b/Documentation/userspace-api/media/mediactl/media-types.rst index 77fd4c0c9ebc..7b24a213cae7 100644 --- a/Documentation/userspace-api/media/mediactl/media-types.rst +++ b/Documentation/userspace-api/media/mediactl/media-types.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _media-controller-types: diff --git a/Documentation/userspace-api/media/mediactl/request-api.rst b/Documentation/userspace-api/media/mediactl/request-api.rst index 37d9442a541e..6c4cbd9f08a5 100644 --- a/Documentation/userspace-api/media/mediactl/request-api.rst +++ b/Documentation/userspace-api/media/mediactl/request-api.rst @@ -1,28 +1,5 @@ -.. This file is dual-licensed: you can use it either under the terms -.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this -.. dual licensing only applies to this file, and not this project as a -.. whole. -.. -.. a) This file is free software; you can redistribute it and/or -.. modify it under the terms of the GNU General Public License as -.. published by the Free Software Foundation version 2 of -.. the License. -.. -.. This file is distributed in the hope that it will be useful, -.. but WITHOUT ANY WARRANTY; without even the implied warranty of -.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.. GNU General Public License for more details. -.. -.. Or, alternatively, -.. -.. b) Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _media-request-api: @@ -117,7 +94,7 @@ regardless of whether a request is in use or not. Setting the same control through a request and also directly can lead to undefined behavior! -User-space can :ref:`poll() <request-func-poll>` a request file descriptor in +User-space can :c:func:`poll()` a request file descriptor in order to wait until the request completes. A request is considered complete once all its associated buffers are available for dequeuing and all the associated controls have been updated with the values at the time of completion. @@ -139,7 +116,7 @@ Recycling and Destruction ------------------------- Finally, a completed request can either be discarded or be reused. Calling -:ref:`close() <request-func-close>` on a request file descriptor will make +:c:func:`close()` on a request file descriptor will make that file descriptor unusable and the request will be freed once it is no longer in use by the kernel. That is, if the request is queued and then the file descriptor is closed, then it won't be freed until the driver completed diff --git a/Documentation/userspace-api/media/mediactl/request-func-close.rst b/Documentation/userspace-api/media/mediactl/request-func-close.rst index 9618b5139764..f4b8eb385ad7 100644 --- a/Documentation/userspace-api/media/mediactl/request-func-close.rst +++ b/Documentation/userspace-api/media/mediactl/request-func-close.rst @@ -1,28 +1,5 @@ -.. This file is dual-licensed: you can use it either under the terms -.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this -.. dual licensing only applies to this file, and not this project as a -.. whole. -.. -.. a) This file is free software; you can redistribute it and/or -.. modify it under the terms of the GNU General Public License as -.. published by the Free Software Foundation version 2 of -.. the License. -.. -.. This file is distributed in the hope that it will be useful, -.. but WITHOUT ANY WARRANTY; without even the implied warranty of -.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.. GNU General Public License for more details. -.. -.. Or, alternatively, -.. -.. b) Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC.request .. _request-func-close: @@ -35,7 +12,6 @@ Name request-close - Close a request file descriptor - Synopsis ======== @@ -43,9 +19,7 @@ Synopsis #include <unistd.h> - .. c:function:: int close( int fd ) - :name: req-close Arguments ========= @@ -53,7 +27,6 @@ Arguments ``fd`` File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`. - Description =========== @@ -62,11 +35,10 @@ are freed once all file descriptors associated with the request are closed and the driver has completed the request. See :ref:`here <media-request-life-time>` for more information. - Return Value ============ -:ref:`close() <request-func-close>` returns 0 on success. On error, -1 is +:c:func:`close()` returns 0 on success. On error, -1 is returned, and ``errno`` is set appropriately. Possible error codes are: EBADF diff --git a/Documentation/userspace-api/media/mediactl/request-func-ioctl.rst b/Documentation/userspace-api/media/mediactl/request-func-ioctl.rst index 4bf985205bcc..4fb3d2ef32d1 100644 --- a/Documentation/userspace-api/media/mediactl/request-func-ioctl.rst +++ b/Documentation/userspace-api/media/mediactl/request-func-ioctl.rst @@ -1,28 +1,5 @@ -.. This file is dual-licensed: you can use it either under the terms -.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this -.. dual licensing only applies to this file, and not this project as a -.. whole. -.. -.. a) This file is free software; you can redistribute it and/or -.. modify it under the terms of the GNU General Public License as -.. published by the Free Software Foundation version 2 of -.. the License. -.. -.. This file is distributed in the hope that it will be useful, -.. but WITHOUT ANY WARRANTY; without even the implied warranty of -.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.. GNU General Public License for more details. -.. -.. Or, alternatively, -.. -.. b) Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _request-func-ioctl: @@ -35,7 +12,6 @@ Name request-ioctl - Control a request file descriptor - Synopsis ======== @@ -43,9 +19,7 @@ Synopsis #include <sys/ioctl.h> - -.. c:function:: int ioctl( int fd, int cmd, void *argp ) - :name: req-ioctl +``int ioctl(int fd, int cmd, void *argp)`` Arguments ========= @@ -60,7 +34,6 @@ Arguments ``argp`` Pointer to a request-specific structure. - Description =========== @@ -76,7 +49,6 @@ their parameters are located in the media.h header file. All request ioctl commands, their respective function and parameters are specified in :ref:`media-user-func`. - Return Value ============ diff --git a/Documentation/userspace-api/media/mediactl/request-func-poll.rst b/Documentation/userspace-api/media/mediactl/request-func-poll.rst index 85a3427e5913..ce0043dbe7da 100644 --- a/Documentation/userspace-api/media/mediactl/request-func-poll.rst +++ b/Documentation/userspace-api/media/mediactl/request-func-poll.rst @@ -1,28 +1,5 @@ -.. This file is dual-licensed: you can use it either under the terms -.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this -.. dual licensing only applies to this file, and not this project as a -.. whole. -.. -.. a) This file is free software; you can redistribute it and/or -.. modify it under the terms of the GNU General Public License as -.. published by the Free Software Foundation version 2 of -.. the License. -.. -.. This file is distributed in the hope that it will be useful, -.. but WITHOUT ANY WARRANTY; without even the implied warranty of -.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.. GNU General Public License for more details. -.. -.. Or, alternatively, -.. -.. b) Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later +.. c:namespace:: MC .. _request-func-poll: @@ -35,7 +12,6 @@ Name request-poll - Wait for some event on a file descriptor - Synopsis ======== @@ -43,9 +19,7 @@ Synopsis #include <sys/poll.h> - .. c:function:: int poll( struct pollfd *ufds, unsigned int nfds, int timeout ) - :name: request-poll Arguments ========= @@ -59,14 +33,13 @@ Arguments ``timeout`` Timeout to wait for events - Description =========== -With the :c:func:`poll() <request-func-poll>` function applications can wait +With the :c:func:`poll()` function applications can wait for a request to complete. -On success :c:func:`poll() <request-func-poll>` returns the number of file +On success :c:func:`poll()` returns the number of file descriptors that have been selected (that is, file descriptors for which the ``revents`` field of the respective struct :c:type:`pollfd` is non-zero). Request file descriptor set the ``POLLPRI`` flag in ``revents`` @@ -77,11 +50,10 @@ set appropriately. Attempting to poll for a request that is not yet queued will set the ``POLLERR`` flag in ``revents``. - Return Value ============ -On success, :c:func:`poll() <request-func-poll>` returns the number of +On success, :c:func:`poll()` returns the number of structures which have non-zero ``revents`` fields, or zero if the call timed out. On error -1 is returned, and the ``errno`` variable is set appropriately: diff --git a/Documentation/userspace-api/media/rc/keytable.c.rst b/Documentation/userspace-api/media/rc/keytable.c.rst index 901d33d37843..0b50cfaf2d86 100644 --- a/Documentation/userspace-api/media/rc/keytable.c.rst +++ b/Documentation/userspace-api/media/rc/keytable.c.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later file: uapi/v4l/keytable.c ========================= diff --git a/Documentation/userspace-api/media/rc/lirc-dev-intro.rst b/Documentation/userspace-api/media/rc/lirc-dev-intro.rst index 0c3d70ded55d..167b354bf051 100644 --- a/Documentation/userspace-api/media/rc/lirc-dev-intro.rst +++ b/Documentation/userspace-api/media/rc/lirc-dev-intro.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _lirc_dev_intro: diff --git a/Documentation/userspace-api/media/rc/lirc-dev.rst b/Documentation/userspace-api/media/rc/lirc-dev.rst index 7a395fa52934..5510dc02a822 100644 --- a/Documentation/userspace-api/media/rc/lirc-dev.rst +++ b/Documentation/userspace-api/media/rc/lirc-dev.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _lirc_dev: diff --git a/Documentation/userspace-api/media/rc/lirc-func.rst b/Documentation/userspace-api/media/rc/lirc-func.rst index e37c99583212..420a3dbf0d6b 100644 --- a/Documentation/userspace-api/media/rc/lirc-func.rst +++ b/Documentation/userspace-api/media/rc/lirc-func.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _lirc_func: diff --git a/Documentation/userspace-api/media/rc/lirc-get-features.rst b/Documentation/userspace-api/media/rc/lirc-get-features.rst index f4b9ca09f828..66a243dbd437 100644 --- a/Documentation/userspace-api/media/rc/lirc-get-features.rst +++ b/Documentation/userspace-api/media/rc/lirc-get-features.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_get_features: @@ -21,8 +15,9 @@ LIRC_GET_FEATURES - Get the underlying hardware device's features Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_GET_FEATURES, __u32 *features) - :name: LIRC_GET_FEATURES +.. c:macro:: LIRC_GET_FEATURES + +``int ioctl(int fd, LIRC_GET_FEATURES, __u32 *features)`` Arguments ========= @@ -33,11 +28,9 @@ Arguments ``features`` Bitmask with the LIRC features. - Description =========== - Get the underlying hardware device's features. If a driver does not announce support of certain features, calling of the corresponding ioctls is undefined. @@ -191,7 +184,6 @@ LIRC features Unused. Kept just to avoid breaking uAPI. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst b/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst index 674ce16d5d33..188478ed1233 100644 --- a/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst +++ b/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_get_rec_mode: .. _lirc_set_rec_mode: @@ -22,11 +16,13 @@ LIRC_GET_REC_MODE/LIRC_SET_REC_MODE - Get/set current receive mode. Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_GET_REC_MODE, __u32 *mode) - :name: LIRC_GET_REC_MODE +.. c:macro:: LIRC_GET_REC_MODE -.. c:function:: int ioctl( int fd, LIRC_SET_REC_MODE, __u32 *mode) - :name: LIRC_SET_REC_MODE +``int ioctl(int fd, LIRC_GET_REC_MODE, __u32 *mode)`` + +.. c:macro:: LIRC_SET_REC_MODE + +``int ioctl(int fd, LIRC_SET_REC_MODE, __u32 *mode)`` Arguments ========= @@ -54,7 +50,6 @@ Return Value :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``ENODEV`` diff --git a/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst b/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst index f20b5bf41232..e29445c5ce16 100644 --- a/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst +++ b/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_get_rec_resolution: @@ -21,8 +15,9 @@ LIRC_GET_REC_RESOLUTION - Obtain the value of receive resolution, in microsecond Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_GET_REC_RESOLUTION, __u32 *microseconds) - :name: LIRC_GET_REC_RESOLUTION +.. c:macro:: LIRC_GET_REC_RESOLUTION + +``int ioctl(int fd, LIRC_GET_REC_RESOLUTION, __u32 *microseconds)`` Arguments ========= @@ -33,7 +28,6 @@ Arguments ``microseconds`` Resolution, in microseconds. - Description =========== @@ -45,7 +39,6 @@ This ioctl returns the integer value with such resolution, with can be used by userspace applications like lircd to automatically adjust the tolerance value. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst b/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst index 973a47bf6068..77472fb5608a 100644 --- a/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst +++ b/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_get_send_mode: .. _lirc_set_send_mode: @@ -22,11 +16,13 @@ LIRC_GET_SEND_MODE/LIRC_SET_SEND_MODE - Get/set current transmit mode. Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_GET_SEND_MODE, __u32 *mode ) - :name: LIRC_GET_SEND_MODE +.. c:macro:: LIRC_GET_SEND_MODE -.. c:function:: int ioctl( int fd, LIRC_SET_SEND_MODE, __u32 *mode ) - :name: LIRC_SET_SEND_MODE +``int ioctl(int fd, LIRC_GET_SEND_MODE, __u32 *mode)`` + +.. c:macro:: LIRC_SET_SEND_MODE + +``int ioctl(int fd, LIRC_SET_SEND_MODE, __u32 *mode)`` Arguments ========= @@ -37,7 +33,6 @@ Arguments ``mode`` The mode used for transmitting. - Description =========== @@ -51,14 +46,12 @@ modes the driver supports. Return Value ============ - .. tabularcolumns:: |p{2.5cm}|p{15.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - - .. row 1 - ``ENODEV`` diff --git a/Documentation/userspace-api/media/rc/lirc-get-timeout.rst b/Documentation/userspace-api/media/rc/lirc-get-timeout.rst index 5db84096d7f8..f5f3e06d6206 100644 --- a/Documentation/userspace-api/media/rc/lirc-get-timeout.rst +++ b/Documentation/userspace-api/media/rc/lirc-get-timeout.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_get_min_timeout: .. _lirc_get_max_timeout: @@ -23,11 +17,13 @@ range for IR receive. Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_GET_MIN_TIMEOUT, __u32 *timeout) - :name: LIRC_GET_MIN_TIMEOUT +.. c:macro:: LIRC_GET_MIN_TIMEOUT -.. c:function:: int ioctl( int fd, LIRC_GET_MAX_TIMEOUT, __u32 *timeout) - :name: LIRC_GET_MAX_TIMEOUT +``int ioctl(int fd, LIRC_GET_MIN_TIMEOUT, __u32 *timeout)`` + +.. c:macro:: LIRC_GET_MAX_TIMEOUT + +``int ioctl(int fd, LIRC_GET_MAX_TIMEOUT, __u32 *timeout)`` Arguments ========= @@ -38,7 +34,6 @@ Arguments ``timeout`` Timeout, in microseconds. - Description =========== @@ -54,7 +49,6 @@ that can be set. both ioctls will return the same value even though the timeout cannot be changed via :ref:`LIRC_SET_REC_TIMEOUT`. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-header.rst b/Documentation/userspace-api/media/rc/lirc-header.rst index c7e0716da159..8bd0acc9913a 100644 --- a/Documentation/userspace-api/media/rc/lirc-header.rst +++ b/Documentation/userspace-api/media/rc/lirc-header.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _lirc_header: diff --git a/Documentation/userspace-api/media/rc/lirc-read.rst b/Documentation/userspace-api/media/rc/lirc-read.rst index 13f7f5353851..d589560214f4 100644 --- a/Documentation/userspace-api/media/rc/lirc-read.rst +++ b/Documentation/userspace-api/media/rc/lirc-read.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc-read: @@ -18,7 +12,6 @@ Name lirc-read - Read from a LIRC device - Synopsis ======== @@ -26,10 +19,7 @@ Synopsis #include <unistd.h> - .. c:function:: ssize_t read( int fd, void *buf, size_t count ) - :name: lirc-read - Arguments ========= @@ -46,9 +36,9 @@ Arguments Description =========== -:ref:`read() <lirc-read>` attempts to read up to ``count`` bytes from file +:c:func:`read()` attempts to read up to ``count`` bytes from file descriptor ``fd`` into the buffer starting at ``buf``. If ``count`` is zero, -:ref:`read() <lirc-read>` returns zero and has no other results. If ``count`` +:c:func:`read()` returns zero and has no other results. If ``count`` is greater than ``SSIZE_MAX``, the result is unspecified. The exact format of the data depends on what :ref:`lirc_modes` a driver @@ -66,7 +56,6 @@ by hardware decoders. The :c:type:`rc_proto` member is set to the used for transmission, and ``scancode`` to the decoded scancode, and the ``keycode`` set to the keycode or ``KEY_RESERVED``. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst b/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst index 4cf9472eb904..9bf9811a905a 100644 --- a/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst +++ b/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_set_measure_carrier_mode: @@ -21,8 +15,9 @@ LIRC_SET_MEASURE_CARRIER_MODE - enable or disable measure mode Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_SET_MEASURE_CARRIER_MODE, __u32 *enable ) - :name: LIRC_SET_MEASURE_CARRIER_MODE +.. c:macro:: LIRC_SET_MEASURE_CARRIER_MODE + +``int ioctl(int fd, LIRC_SET_MEASURE_CARRIER_MODE, __u32 *enable)`` Arguments ========= @@ -34,7 +29,6 @@ Arguments enable = 1 means enable measure mode, enable = 0 means disable measure mode. - Description =========== @@ -44,7 +38,6 @@ Enable or disable measure mode. If enabled, from the next key press on, the driver will send ``LIRC_MODE2_FREQUENCY`` packets. By default this should be turned off. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst index 0439e93aa267..530bc223930a 100644 --- a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst +++ b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_set_rec_carrier_range: @@ -22,8 +16,9 @@ IR receive. Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_SET_REC_CARRIER_RANGE, __u32 *frequency ) - :name: LIRC_SET_REC_CARRIER_RANGE +.. c:macro:: LIRC_SET_REC_CARRIER_RANGE + +``int ioctl(int fd, LIRC_SET_REC_CARRIER_RANGE, __u32 *frequency)`` Arguments ========= diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst index f4d18897cb9f..28c928f1cc14 100644 --- a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst +++ b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_set_rec_carrier: @@ -18,12 +12,12 @@ Name LIRC_SET_REC_CARRIER - Set carrier used to modulate IR receive. - Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_SET_REC_CARRIER, __u32 *frequency ) - :name: LIRC_SET_REC_CARRIER +.. c:macro:: LIRC_SET_REC_CARRIER + +``int ioctl(int fd, LIRC_SET_REC_CARRIER, __u32 *frequency)`` Arguments ========= @@ -44,7 +38,6 @@ Set receive carrier used to modulate IR PWM pulses and spaces. If called together with :ref:`LIRC_SET_REC_CARRIER_RANGE`, this ioctl sets the upper bound frequency that will be recognized by the device. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst index ab97f87fa757..83e7155c5796 100644 --- a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst +++ b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_set_rec_timeout_reports: @@ -21,8 +15,9 @@ LIRC_SET_REC_TIMEOUT_REPORTS - enable or disable timeout reports for IR receive Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_SET_REC_TIMEOUT_REPORTS, __u32 *enable ) - :name: LIRC_SET_REC_TIMEOUT_REPORTS +.. c:macro:: LIRC_SET_REC_TIMEOUT_REPORTS + +``int ioctl(int fd, LIRC_SET_REC_TIMEOUT_REPORTS, __u32 *enable)`` Arguments ========= @@ -34,7 +29,6 @@ Arguments enable = 1 means enable timeout report, enable = 0 means disable timeout reports. - Description =========== @@ -47,7 +41,6 @@ should be turned off. This ioctl is only valid for :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst index 227776cf7c62..8f3f9adf54ab 100644 --- a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst +++ b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_set_rec_timeout: .. _lirc_get_rec_timeout: @@ -22,11 +16,13 @@ LIRC_GET_REC_TIMEOUT/LIRC_SET_REC_TIMEOUT - Get/set the integer value for IR ina Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_GET_REC_TIMEOUT, __u32 *timeout ) - :name: LIRC_GET_REC_TIMEOUT +.. c:macro:: LIRC_GET_REC_TIMEOUT -.. c:function:: int ioctl( int fd, LIRC_SET_REC_TIMEOUT, __u32 *timeout ) - :name: LIRC_SET_REC_TIMEOUT +``int ioctl(int fd, LIRC_GET_REC_TIMEOUT, __u32 *timeout)`` + +.. c:macro:: LIRC_SET_REC_TIMEOUT + +``int ioctl(int fd, LIRC_SET_REC_TIMEOUT, __u32 *timeout)`` Arguments ========= @@ -37,7 +33,6 @@ Arguments ``timeout`` Timeout, in microseconds. - Description =========== @@ -52,7 +47,6 @@ given value should be set. The range of supported timeout is given by :ref:`LIRC_GET_MIN_TIMEOUT`. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst b/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst index 7eaf2b993207..e3810ba58746 100644 --- a/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst +++ b/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_set_send_carrier: @@ -18,12 +12,12 @@ Name LIRC_SET_SEND_CARRIER - Set send carrier used to modulate IR TX. - Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_SET_SEND_CARRIER, __u32 *frequency ) - :name: LIRC_SET_SEND_CARRIER +.. c:macro:: LIRC_SET_SEND_CARRIER + +``int ioctl(int fd, LIRC_SET_SEND_CARRIER, __u32 *frequency)`` Arguments ========= @@ -39,7 +33,6 @@ Description Set send carrier used to modulate IR PWM pulses and spaces. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst b/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst index 0dee89364cde..52a072529af9 100644 --- a/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst +++ b/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_set_send_duty_cycle: @@ -22,8 +16,9 @@ IR transmit. Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_SET_SEND_DUTY_CYCLE, __u32 *duty_cycle) - :name: LIRC_SET_SEND_DUTY_CYCLE +.. c:macro:: LIRC_SET_SEND_DUTY_CYCLE + +``int ioctl(int fd, LIRC_SET_SEND_DUTY_CYCLE, __u32 *duty_cycle)`` Arguments ========= @@ -35,7 +30,6 @@ Arguments Duty cicle, describing the pulse width in percent (from 1 to 99) of the total cycle. Values 0 and 100 are reserved. - Description =========== @@ -45,7 +39,6 @@ Currently, no special meaning is defined for 0 or 100, but this could be used to switch off carrier generation in the future, so these values should be reserved. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst b/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst index dcee4b71dcf6..68f4cc2e3ae3 100644 --- a/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst +++ b/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_set_transmitter_mask: @@ -21,8 +15,9 @@ LIRC_SET_TRANSMITTER_MASK - Enables send codes on a given set of transmitters Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_SET_TRANSMITTER_MASK, __u32 *mask ) - :name: LIRC_SET_TRANSMITTER_MASK +.. c:macro:: LIRC_SET_TRANSMITTER_MASK + +``int ioctl(int fd, LIRC_SET_TRANSMITTER_MASK, __u32 *mask)`` Arguments ========= @@ -33,7 +28,6 @@ Arguments ``mask`` Mask with channels to enable tx. Channel 0 is the least significant bit. - Description =========== @@ -49,7 +43,6 @@ When an invalid bit mask is given, i.e. a bit is set, even though the device does not have so many transitters, then this ioctl returns the number of available transitters and does nothing otherwise. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst b/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst index 22f6fe43b7e7..be5321c4a91f 100644 --- a/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst +++ b/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc_set_wideband_receiver: @@ -21,8 +15,9 @@ LIRC_SET_WIDEBAND_RECEIVER - enable wide band receiver. Synopsis ======== -.. c:function:: int ioctl( int fd, LIRC_SET_WIDEBAND_RECEIVER, __u32 *enable ) - :name: LIRC_SET_WIDEBAND_RECEIVER +.. c:macro:: LIRC_SET_WIDEBAND_RECEIVER + +``int ioctl(int fd, LIRC_SET_WIDEBAND_RECEIVER, __u32 *enable)`` Arguments ========= @@ -34,7 +29,6 @@ Arguments enable = 1 means enable wideband receiver, enable = 0 means disable wideband receiver. - Description =========== @@ -54,7 +48,6 @@ reduced range of reception. carrier reports. Trying to disable wide band receiver while carrier reports are active will do nothing. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/lirc-write.rst b/Documentation/userspace-api/media/rc/lirc-write.rst index 96ca4a22062e..c1c3230d4fd6 100644 --- a/Documentation/userspace-api/media/rc/lirc-write.rst +++ b/Documentation/userspace-api/media/rc/lirc-write.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: RC .. _lirc-write: @@ -18,7 +12,6 @@ Name lirc-write - Write to a LIRC device - Synopsis ======== @@ -26,9 +19,7 @@ Synopsis #include <unistd.h> - .. c:function:: ssize_t write( int fd, void *buf, size_t count ) - :name: lirc-write Arguments ========= @@ -45,7 +36,7 @@ Arguments Description =========== -:ref:`write() <lirc-write>` writes up to ``count`` bytes to the device +:c:func:`write()` writes up to ``count`` bytes to the device referenced by the file descriptor ``fd`` from the buffer starting at ``buf``. @@ -71,7 +62,6 @@ for the protocol or the scancode is not valid for the specified protocol, ``EINVAL`` is returned. The write function blocks until the scancode is transmitted by the hardware. - Return Value ============ diff --git a/Documentation/userspace-api/media/rc/rc-intro.rst b/Documentation/userspace-api/media/rc/rc-intro.rst index 14e85157bf23..1338478e2bd4 100644 --- a/Documentation/userspace-api/media/rc/rc-intro.rst +++ b/Documentation/userspace-api/media/rc/rc-intro.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _Remote_controllers_Intro: diff --git a/Documentation/userspace-api/media/rc/rc-protos.rst b/Documentation/userspace-api/media/rc/rc-protos.rst index b250ebe301d5..2e290584a210 100644 --- a/Documentation/userspace-api/media/rc/rc-protos.rst +++ b/Documentation/userspace-api/media/rc/rc-protos.rst @@ -1,6 +1,4 @@ -.. SPDX-License-Identifier: GPL-2.0 -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _Remote_controllers_Protocols: diff --git a/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst b/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst index 73dd75f77d65..43c442696438 100644 --- a/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst +++ b/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _remote_controllers_sysfs_nodes: diff --git a/Documentation/userspace-api/media/rc/rc-table-change.rst b/Documentation/userspace-api/media/rc/rc-table-change.rst index f5d00a20b939..61c77b080ae8 100644 --- a/Documentation/userspace-api/media/rc/rc-table-change.rst +++ b/Documentation/userspace-api/media/rc/rc-table-change.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _Remote_controllers_table_change: diff --git a/Documentation/userspace-api/media/rc/rc-tables.rst b/Documentation/userspace-api/media/rc/rc-tables.rst index 33b724b17ff3..8dc11657fc23 100644 --- a/Documentation/userspace-api/media/rc/rc-tables.rst +++ b/Documentation/userspace-api/media/rc/rc-tables.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _Remote_controllers_tables: diff --git a/Documentation/userspace-api/media/rc/remote_controllers.rst b/Documentation/userspace-api/media/rc/remote_controllers.rst index 3ab2d6db1564..2d9078accb35 100644 --- a/Documentation/userspace-api/media/rc/remote_controllers.rst +++ b/Documentation/userspace-api/media/rc/remote_controllers.rst @@ -1,12 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections - +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. include:: <isonum.txt> .. _remote_controllers: diff --git a/Documentation/userspace-api/media/typical_media_device.svg b/Documentation/userspace-api/media/typical_media_device.svg index 3420341ff7b6..fca7af8e438b 100644 --- a/Documentation/userspace-api/media/typical_media_device.svg +++ b/Documentation/userspace-api/media/typical_media_device.svg @@ -1,14 +1,5 @@ <?xml version="1.0" encoding="UTF-8"?> -<!-- - Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later --> <svg id="svg2" width="235mm" height="179mm" clip-path="url(#a)" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 22648.239 17899.829" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata1533"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4"><clipPath id="a"><rect id="rect7" width="28000" height="21000"/></clipPath></defs><path id="path11" d="m10146 2636c-518.06 0-1035.1 515-1035.1 1031v4124c0 516 517.06 1032 1035.1 1032h8572.2c518.06 0 1036.1-516 1036.1-1032v-4124c0-516-518.06-1031-1036.1-1031h-8572.2z" fill="#fcf" style=""/><path id="path15" d="m1505.5 13443c-293 0-585 292-585 585v2340c0 293 292 586 585 586h3275c293 0 586-293 586-586v-2340c0-293-293-585-586-585h-3275z" fill="#ffc" style=""/><path id="path19" d="m517.15 22.013c-461 0-922 461-922 922v11169c0 461 461 923 922 923h3692c461 0 922-462 922-923v-11169c0-461-461-922-922-922h-3692z" fill="#e6e6e6" style=""/><path id="path23" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="#ff8080" style=""/><path id="path25" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="none" stroke="#3465af" style=""/><text id="text27" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan29" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan31" class="TextPosition" x="489.5459" y="6111.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan33" fill="#000000" font-family="Serif, serif" font-size="493.88px">Audio decoder</tspan></tspan></tspan></text> diff --git a/Documentation/userspace-api/media/v4l/app-pri.rst b/Documentation/userspace-api/media/v4l/app-pri.rst index 5018ede2706f..626a42f2e138 100644 --- a/Documentation/userspace-api/media/v4l/app-pri.rst +++ b/Documentation/userspace-api/media/v4l/app-pri.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _app-pri: diff --git a/Documentation/userspace-api/media/v4l/async.rst b/Documentation/userspace-api/media/v4l/async.rst index 8bc4a726c95e..d6960ff5c382 100644 --- a/Documentation/userspace-api/media/v4l/async.rst +++ b/Documentation/userspace-api/media/v4l/async.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _async: diff --git a/Documentation/userspace-api/media/v4l/audio.rst b/Documentation/userspace-api/media/v4l/audio.rst index d6bb85092e02..17f0b1c89908 100644 --- a/Documentation/userspace-api/media/v4l/audio.rst +++ b/Documentation/userspace-api/media/v4l/audio.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _audio: diff --git a/Documentation/userspace-api/media/v4l/bayer.svg b/Documentation/userspace-api/media/v4l/bayer.svg index 82e805c68c1f..c500a28f0817 100644 --- a/Documentation/userspace-api/media/v4l/bayer.svg +++ b/Documentation/userspace-api/media/v4l/bayer.svg @@ -1,31 +1,5 @@ <?xml version="1.0" encoding="UTF-8"?> -<!-- - This file is dual-licensed: you can use it either under the terms - of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this - dual licensing only applies to this file, and not this project as a - whole. - - a) This file is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation version 2 of - the License. - - This file is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - Or, alternatively, - - b) Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later --> <svg id="svg2" width="164.15mm" height="46.771mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 16415.333 4677.1107" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata652"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><g id="g186" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id6"><rect id="rect189" class="BoundingBox" x="3299" y="3199" width="1303" height="1203" fill="none"/><path id="path191" d="m3950 4400h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path193" d="m3950 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text195" class="TextShape"><tspan id="tspan197" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan199" class="TextPosition" x="3739" y="4021"><tspan id="tspan201" fill="#ffffff">B</tspan></tspan></tspan></text> </g></g><g id="g203" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id7"><rect id="rect206" class="BoundingBox" x="4599" y="3199" width="1303" height="1203" fill="none"/><path id="path208" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path210" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text212" class="TextShape"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="5003" y="4021"><tspan id="tspan218" fill="#ffffff">G</tspan></tspan></tspan></text> diff --git a/Documentation/userspace-api/media/v4l/biblio.rst b/Documentation/userspace-api/media/v4l/biblio.rst index 3c9634173e82..7869b6f6ff72 100644 --- a/Documentation/userspace-api/media/v4l/biblio.rst +++ b/Documentation/userspace-api/media/v4l/biblio.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ********** References diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst index 57e752aaf414..7dbdfbb4a0a9 100644 --- a/Documentation/userspace-api/media/v4l/buffer.rst +++ b/Documentation/userspace-api/media/v4l/buffer.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _buffer: @@ -40,7 +34,6 @@ mem-to-mem devices is an exception to the rule: the timestamp source flags are copied from the OUTPUT video buffer to the CAPTURE video buffer. - Interactions between formats, controls and buffers ================================================== @@ -159,7 +152,6 @@ based on the queried sizes (for instance by allocating a set of buffers large enough for all the desired formats and controls, or by allocating separate set of appropriately sized buffers for each use case). - .. c:type:: v4l2_buffer struct v4l2_buffer @@ -264,7 +256,7 @@ struct v4l2_buffer ``V4L2_MEMORY_MMAP`` this is the offset of the buffer from the start of the device memory. The value is returned by the driver and apart of serving as parameter to the - :ref:`mmap() <func-mmap>` function not useful for applications. + :c:func:`mmap()` function not useful for applications. See :ref:`mmap` for details * - unsigned long - ``userptr`` @@ -317,7 +309,6 @@ struct v4l2_buffer given, then ``EINVAL`` will be returned. - .. c:type:: v4l2_plane struct v4l2_plane @@ -357,7 +348,7 @@ struct v4l2_plane - ``mem_offset`` - When the memory type in the containing struct :c:type:`v4l2_buffer` is ``V4L2_MEMORY_MMAP``, this - is the value that should be passed to :ref:`mmap() <func-mmap>`, + is the value that should be passed to :c:func:`mmap()`, similar to the ``offset`` field in struct :c:type:`v4l2_buffer`. * - unsigned long @@ -391,7 +382,6 @@ struct v4l2_plane applications. - .. c:type:: v4l2_buf_type enum v4l2_buf_type @@ -455,7 +445,6 @@ enum v4l2_buf_type - Buffer for metadata output, see :ref:`metadata`. - .. _buffer-flags: Buffer Flags @@ -689,37 +678,6 @@ Buffer Flags .. _memory-flags: -Memory Consistency Flags -======================== - -.. tabularcolumns:: |p{7.0cm}|p{2.2cm}|p{8.3cm}| - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 3 1 4 - - * .. _`V4L2-FLAG-MEMORY-NON-CONSISTENT`: - - - ``V4L2_FLAG_MEMORY_NON_CONSISTENT`` - - 0x00000001 - - A buffer is allocated either in consistent (it will be automatically - coherent between the CPU and the bus) or non-consistent memory. The - latter can provide performance gains, for instance the CPU cache - sync/flush operations can be avoided if the buffer is accessed by the - corresponding device only and the CPU does not read/write to/from that - buffer. However, this requires extra care from the driver -- it must - guarantee memory consistency by issuing a cache flush/sync when - consistency is needed. If this flag is set V4L2 will attempt to - allocate the buffer in non-consistent memory. The flag takes effect - only if the buffer is used for :ref:`memory mapping <mmap>` I/O and the - queue reports the :ref:`V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS - <V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS>` capability. - -.. c:type:: v4l2_memory - enum v4l2_memory ================ @@ -744,7 +702,6 @@ enum v4l2_memory - The buffer is used for :ref:`DMA shared buffer <dmabuf>` I/O. - Timecodes ========= @@ -753,7 +710,6 @@ The :c:type:`v4l2_buffer_timecode` structure is designed to hold a (struct :c:type:`timeval` timestamps are stored in the struct :c:type:`v4l2_buffer` ``timestamp`` field.) - .. c:type:: v4l2_timecode struct v4l2_timecode @@ -790,7 +746,6 @@ struct v4l2_timecode - The "user group" bits from the timecode. - .. _timecode-type: Timecode Types @@ -820,7 +775,6 @@ Timecode Types - - .. _timecode-flags: Timecode Flags diff --git a/Documentation/userspace-api/media/v4l/capture-example.rst b/Documentation/userspace-api/media/v4l/capture-example.rst index 6aa67c5aff8f..25891320b7ad 100644 --- a/Documentation/userspace-api/media/v4l/capture-example.rst +++ b/Documentation/userspace-api/media/v4l/capture-example.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _capture-example: diff --git a/Documentation/userspace-api/media/v4l/capture.c.rst b/Documentation/userspace-api/media/v4l/capture.c.rst index 30f7c816e858..ccbd52c3897f 100644 --- a/Documentation/userspace-api/media/v4l/capture.c.rst +++ b/Documentation/userspace-api/media/v4l/capture.c.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later file: media/v4l/capture.c ========================= diff --git a/Documentation/userspace-api/media/v4l/colorspaces-defs.rst b/Documentation/userspace-api/media/v4l/colorspaces-defs.rst index 01404e1f609a..fe9f8aa8ab9d 100644 --- a/Documentation/userspace-api/media/v4l/colorspaces-defs.rst +++ b/Documentation/userspace-api/media/v4l/colorspaces-defs.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later **************************** Defining Colorspaces in V4L2 @@ -36,8 +29,7 @@ whole range, 0-255, dividing the angular value by 1.41. The enum :c:type:`v4l2_hsv_encoding` specifies which encoding is used. .. note:: The default R'G'B' quantization is full range for all - colorspaces except for BT.2020 which uses limited range R'G'B' - quantization. + colorspaces. HSV formats are always full range. .. tabularcolumns:: |p{6.7cm}|p{10.8cm}| @@ -169,8 +161,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum - Details * - ``V4L2_QUANTIZATION_DEFAULT`` - Use the default quantization encoding as defined by the - colorspace. This is always full range for R'G'B' (except for the - BT.2020 colorspace) and HSV. It is usually limited range for Y'CbCr. + colorspace. This is always full range for R'G'B' and HSV. + It is usually limited range for Y'CbCr. * - ``V4L2_QUANTIZATION_FULL_RANGE`` - Use the full range quantization encoding. I.e. the range [0…1] is mapped to [0…255] (with possible clipping to [1…254] to avoid the @@ -180,4 +172,4 @@ whole range, 0-255, dividing the angular value by 1.41. The enum * - ``V4L2_QUANTIZATION_LIM_RANGE`` - Use the limited range quantization encoding. I.e. the range [0…1] is mapped to [16…235]. Cb and Cr are mapped from [-0.5…0.5] to - [16…240]. + [16…240]. Limited Range cannot be used with HSV. diff --git a/Documentation/userspace-api/media/v4l/colorspaces-details.rst b/Documentation/userspace-api/media/v4l/colorspaces-details.rst index 300c5d2e7d0f..014e7c9fc655 100644 --- a/Documentation/userspace-api/media/v4l/colorspaces-details.rst +++ b/Documentation/userspace-api/media/v4l/colorspaces-details.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ******************************** Detailed Colorspace Descriptions @@ -377,9 +370,8 @@ Colorspace BT.2020 (V4L2_COLORSPACE_BT2020) The :ref:`itu2020` standard defines the colorspace used by Ultra-high definition television (UHDTV). The default transfer function is ``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is -``V4L2_YCBCR_ENC_BT2020``. The default R'G'B' quantization is limited -range (!), and so is the default Y'CbCr quantization. The chromaticities -of the primary colors and the white reference are: +``V4L2_YCBCR_ENC_BT2020``. The default Y'CbCr quantization is limited range. +The chromaticities of the primary colors and the white reference are: diff --git a/Documentation/userspace-api/media/v4l/colorspaces.rst b/Documentation/userspace-api/media/v4l/colorspaces.rst index 0846df9066c5..2aa0dda4fd01 100644 --- a/Documentation/userspace-api/media/v4l/colorspaces.rst +++ b/Documentation/userspace-api/media/v4l/colorspaces.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _colorspaces: diff --git a/Documentation/userspace-api/media/v4l/common-defs.rst b/Documentation/userspace-api/media/v4l/common-defs.rst index 370a1e364a51..6ae42ac7ddb7 100644 --- a/Documentation/userspace-api/media/v4l/common-defs.rst +++ b/Documentation/userspace-api/media/v4l/common-defs.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _common-defs: diff --git a/Documentation/userspace-api/media/v4l/common.rst b/Documentation/userspace-api/media/v4l/common.rst index 7d81c58a13cd..d84aeb703165 100644 --- a/Documentation/userspace-api/media/v4l/common.rst +++ b/Documentation/userspace-api/media/v4l/common.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _common: diff --git a/Documentation/userspace-api/media/v4l/compat.rst b/Documentation/userspace-api/media/v4l/compat.rst index 055286b86e9b..b63b8392dec6 100644 --- a/Documentation/userspace-api/media/v4l/compat.rst +++ b/Documentation/userspace-api/media/v4l/compat.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _compat: diff --git a/Documentation/userspace-api/media/v4l/constraints.svg b/Documentation/userspace-api/media/v4l/constraints.svg index 1dfe51a9839d..ac5f82bc6d1a 100644 --- a/Documentation/userspace-api/media/v4l/constraints.svg +++ b/Documentation/userspace-api/media/v4l/constraints.svg @@ -1,31 +1,5 @@ <?xml version="1.0" encoding="UTF-8"?> -<!-- - This file is dual-licensed: you can use it either under the terms - of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this - dual licensing only applies to this file, and not this project as a - whole. - - a) This file is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation version 2 of - the License. - - This file is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - Or, alternatively, - - b) Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later --> <svg id="svg2" width="249.01mm" height="143.01mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 24900.998 14300.999" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata325"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4" class="ClipPathGroup"><marker id="marker6261" overflow="visible" orient="auto"><path id="path6263" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6125" overflow="visible" orient="auto"><path id="path6127" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6001" overflow="visible" orient="auto"><path id="path6003" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5693" overflow="visible" orient="auto"><path id="path5695" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5575" overflow="visible" orient="auto"><path id="path5577" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5469" overflow="visible" orient="auto"><path id="path5471" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5259" overflow="visible" orient="auto"><path id="path5261" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="Arrow2Mend" overflow="visible" orient="auto"><path id="path4241" transform="scale(-.6)" d="m8.7186 4.0337-10.926-4.0177 10.926-4.0177c-1.7455 2.3721-1.7354 5.6175-6e-7 8.0354z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-linejoin="round" stroke-width=".625"/></marker></defs><g id="g204" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id6"><rect id="rect207" class="BoundingBox" x="1350" y="3250" width="24901" height="14301" diff --git a/Documentation/userspace-api/media/v4l/control.rst b/Documentation/userspace-api/media/v4l/control.rst index 3e991c1f7a12..4e5652eb6126 100644 --- a/Documentation/userspace-api/media/v4l/control.rst +++ b/Documentation/userspace-api/media/v4l/control.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _control: diff --git a/Documentation/userspace-api/media/v4l/crop.rst b/Documentation/userspace-api/media/v4l/crop.rst index cb7e2341aedf..3fe185e25ccf 100644 --- a/Documentation/userspace-api/media/v4l/crop.rst +++ b/Documentation/userspace-api/media/v4l/crop.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _crop: diff --git a/Documentation/userspace-api/media/v4l/crop.svg b/Documentation/userspace-api/media/v4l/crop.svg index 4cd47f98e7c8..5483227757e7 100644 --- a/Documentation/userspace-api/media/v4l/crop.svg +++ b/Documentation/userspace-api/media/v4l/crop.svg @@ -1,14 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- - Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later --> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/userspace-api/media/v4l/depth-formats.rst b/Documentation/userspace-api/media/v4l/depth-formats.rst index 6742486a83b5..b4f3fc229c85 100644 --- a/Documentation/userspace-api/media/v4l/depth-formats.rst +++ b/Documentation/userspace-api/media/v4l/depth-formats.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _depth-formats: diff --git a/Documentation/userspace-api/media/v4l/dev-capture.rst b/Documentation/userspace-api/media/v4l/dev-capture.rst index 44d3094093ab..fe58fd450e2f 100644 --- a/Documentation/userspace-api/media/v4l/dev-capture.rst +++ b/Documentation/userspace-api/media/v4l/dev-capture.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _capture: @@ -26,7 +20,6 @@ device. .. note:: The same device file names are used for video output devices. - Querying Capabilities ===================== @@ -41,7 +34,6 @@ functions they may also support the :ref:`video overlay <overlay>` streaming I/O methods must be supported. Tuners and audio inputs are optional. - Supplemental Functions ====================== @@ -52,7 +44,6 @@ Video capture devices shall support :ref:`audio input <audio>`, :ref:`video input <video>` ioctls must be supported by all video capture devices. - Image Format Negotiation ======================== @@ -62,7 +53,7 @@ capture, the latter how images are stored in memory, i. e. in RGB or YUV format, the number of bits per pixel or width and height. Together they also define how images are scaled in the process. -As usual these parameters are *not* reset at :ref:`open() <func-open>` +As usual these parameters are *not* reset at :c:func:`open()` time to permit Unix tool chains, programming a device and then reading from it as if it was a plain file. Well written V4L2 applications ensure they really get what they want, including cropping and scaling. @@ -102,7 +93,6 @@ and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, even if :ref:`VIDIOC_S_FMT <VIDIOC requests and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does. :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is optional. - Reading Images ============== diff --git a/Documentation/userspace-api/media/v4l/dev-encoder.rst b/Documentation/userspace-api/media/v4l/dev-encoder.rst index fb44f20924de..aa338b9624b0 100644 --- a/Documentation/userspace-api/media/v4l/dev-encoder.rst +++ b/Documentation/userspace-api/media/v4l/dev-encoder.rst @@ -1,28 +1,4 @@ -.. This file is dual-licensed: you can use it either under the terms -.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this -.. dual licensing only applies to this file, and not this project as a -.. whole. -.. -.. a) This file is free software; you can redistribute it and/or -.. modify it under the terms of the GNU General Public License as -.. published by the Free Software Foundation version 2 of -.. the License. -.. -.. This file is distributed in the hope that it will be useful, -.. but WITHOUT ANY WARRANTY; without even the implied warranty of -.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.. GNU General Public License for more details. -.. -.. Or, alternatively, -.. -.. b) Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later .. _encoder: diff --git a/Documentation/userspace-api/media/v4l/dev-event.rst b/Documentation/userspace-api/media/v4l/dev-event.rst index d09034fd680a..f34f9cf6ce6c 100644 --- a/Documentation/userspace-api/media/v4l/dev-event.rst +++ b/Documentation/userspace-api/media/v4l/dev-event.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _event: diff --git a/Documentation/userspace-api/media/v4l/dev-mem2mem.rst b/Documentation/userspace-api/media/v4l/dev-mem2mem.rst index 40aff9c95267..d8db46886555 100644 --- a/Documentation/userspace-api/media/v4l/dev-mem2mem.rst +++ b/Documentation/userspace-api/media/v4l/dev-mem2mem.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _mem2mem: diff --git a/Documentation/userspace-api/media/v4l/dev-meta.rst b/Documentation/userspace-api/media/v4l/dev-meta.rst index 6d2c5a79b370..8ec3a73dcae4 100644 --- a/Documentation/userspace-api/media/v4l/dev-meta.rst +++ b/Documentation/userspace-api/media/v4l/dev-meta.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _metadata: diff --git a/Documentation/userspace-api/media/v4l/dev-osd.rst b/Documentation/userspace-api/media/v4l/dev-osd.rst index ad0c156c7898..8e4be9129e75 100644 --- a/Documentation/userspace-api/media/v4l/dev-osd.rst +++ b/Documentation/userspace-api/media/v4l/dev-osd.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _osd: diff --git a/Documentation/userspace-api/media/v4l/dev-output.rst b/Documentation/userspace-api/media/v4l/dev-output.rst index e4f2a1d8b0fc..eadcb4aa813b 100644 --- a/Documentation/userspace-api/media/v4l/dev-output.rst +++ b/Documentation/userspace-api/media/v4l/dev-output.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _output: @@ -25,7 +19,6 @@ device. .. note:: The same device file names are used also for video capture devices. - Querying Capabilities ===================== @@ -39,7 +32,6 @@ functions they may also support the :ref:`raw VBI output <raw-vbi>` streaming I/O methods must be supported. Modulators and audio outputs are optional. - Supplemental Functions ====================== @@ -50,7 +42,6 @@ Video output devices shall support :ref:`audio output <audio>`, :ref:`video output <video>` ioctls must be supported by all video output devices. - Image Format Negotiation ======================== @@ -60,7 +51,7 @@ the latter how images are stored in memory, i. e. in RGB or YUV format, the number of bits per pixel or width and height. Together they also define how images are scaled in the process. -As usual these parameters are *not* reset at :ref:`open() <func-open>` +As usual these parameters are *not* reset at :c:func:`open()` time to permit Unix tool chains, programming a device and then writing to it as if it was a plain file. Well written V4L2 applications ensure they really get what they want, including cropping and scaling. @@ -99,7 +90,6 @@ and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, even if :ref:`VIDIOC_S_FMT <VIDIOC requests and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does. :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is optional. - Writing Images ============== diff --git a/Documentation/userspace-api/media/v4l/dev-overlay.rst b/Documentation/userspace-api/media/v4l/dev-overlay.rst index 7246d560173d..07cc92564c16 100644 --- a/Documentation/userspace-api/media/v4l/dev-overlay.rst +++ b/Documentation/userspace-api/media/v4l/dev-overlay.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _overlay: diff --git a/Documentation/userspace-api/media/v4l/dev-radio.rst b/Documentation/userspace-api/media/v4l/dev-radio.rst index c0edd7b7d201..284ce96a1637 100644 --- a/Documentation/userspace-api/media/v4l/dev-radio.rst +++ b/Documentation/userspace-api/media/v4l/dev-radio.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _radio: diff --git a/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst b/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst index 0307d44e17cb..3f43a01ba938 100644 --- a/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst +++ b/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _raw-vbi: @@ -39,7 +33,6 @@ applications must call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. Accessed as ``/dev/vbi``, raw VBI capturing or output is the default device function. - Querying Capabilities ===================== @@ -51,7 +44,6 @@ in the ``capabilities`` field of struct read/write, streaming or asynchronous I/O methods must be supported. VBI devices may or may not have a tuner or modulator. - Supplemental Functions ====================== @@ -60,7 +52,6 @@ VBI devices shall support :ref:`video input or output <video>`, ioctls as needed. The :ref:`video standard <standard>` ioctls provide information vital to program a VBI device, therefore must be supported. - Raw VBI Format Negotiation ========================== @@ -69,7 +60,7 @@ frequency. To properly interpret the data V4L2 specifies an ioctl to query the sampling parameters. Moreover, to allow for some flexibility applications can also suggest different parameters. -As usual these parameters are *not* reset at :ref:`open() <func-open>` +As usual these parameters are *not* reset at :c:func:`open()` time to permit Unix tool chains, programming a device and then reading from it as if it was a plain file. Well written V4L2 applications should always ensure they really get what they want, requesting reasonable @@ -98,8 +89,8 @@ happen for instance when the video and VBI areas to capture would overlap, or when the driver supports multiple opens and another process already requested VBI capturing or output. Anyway, applications must expect other resource allocation points which may return ``EBUSY``, at the -:ref:`VIDIOC_STREAMON` ioctl and the first :ref:`read() <func-read>` -, :ref:`write() <func-write>` and :ref:`select() <func-select>` calls. +:ref:`VIDIOC_STREAMON` ioctl and the first :c:func:`read()` +, :c:func:`write()` and :c:func:`select()` calls. VBI devices must implement both the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, even if :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ignores all requests @@ -189,7 +180,6 @@ and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does - This array is reserved for future extensions. Drivers and applications must set it to zero. - .. tabularcolumns:: |p{4.4cm}|p{1.5cm}|p{11.6cm}| .. _vbifmt-flags: @@ -225,7 +215,6 @@ and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does non-zero. - .. _vbi-hsync: .. kernel-figure:: vbi_hsync.svg @@ -234,7 +223,6 @@ and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does **Figure 4.1. Line synchronization** - .. _vbi-525: .. kernel-figure:: vbi_525.svg @@ -258,7 +246,6 @@ negotiation, or after switching the video standard which may invalidate the negotiated VBI parameters, should be refused by the driver. A format change during active I/O is not permitted. - Reading and writing VBI images ============================== @@ -268,7 +255,6 @@ consisting of two fields of VBI images immediately following in memory. The total size of a frame computes as follows: - .. code-block:: c (count[0] + count[1]) * samples_per_line * sample size in bytes @@ -283,8 +269,8 @@ The latter bears the possibility of synchronizing video and VBI data by using buffer timestamps. Remember the :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` ioctl and the -first :ref:`read() <func-read>`, :ref:`write() <func-write>` and -:ref:`select() <func-select>` call can be resource allocation +first :c:func:`read()`, :c:func:`write()` and +:c:func:`select()` call can be resource allocation points returning an ``EBUSY`` error code if the required hardware resources are temporarily unavailable, for example the device is already in use by another process. diff --git a/Documentation/userspace-api/media/v4l/dev-rds.rst b/Documentation/userspace-api/media/v4l/dev-rds.rst index 13dba4a4180c..207216d5e6a5 100644 --- a/Documentation/userspace-api/media/v4l/dev-rds.rst +++ b/Documentation/userspace-api/media/v4l/dev-rds.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _rds: @@ -35,7 +29,6 @@ The RDS interface does not support this format. Should support for MMBS the linux-media mailing list: `https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__. - Querying Capabilities ===================== @@ -75,31 +68,27 @@ like program identification codes and radio text, the flag :ref:`Writing RDS data <writing-rds-data>` and :ref:`FM Transmitter Control Reference <fm-tx-controls>`. - .. _reading-rds-data: Reading RDS data ================ RDS data can be read from the radio device with the -:ref:`read() <func-read>` function. The data is packed in groups of +:c:func:`read()` function. The data is packed in groups of three bytes. - .. _writing-rds-data: Writing RDS data ================ RDS data can be written to the radio device with the -:ref:`write() <func-write>` function. The data is packed in groups of +:c:func:`write()` function. The data is packed in groups of three bytes, as follows: - RDS datastructures ================== - .. c:type:: v4l2_rds_data .. tabularcolumns:: |p{2.5cm}|p{2.5cm}|p{12.5cm}| @@ -120,7 +109,6 @@ RDS datastructures - Block description - .. _v4l2-rds-block: .. tabularcolumns:: |p{2.9cm}|p{14.6cm}| @@ -143,7 +131,6 @@ RDS datastructures reception of this block. - .. _v4l2-rds-block-codes: .. tabularcolumns:: |p{6.4cm}|p{2.0cm}|p{1.2cm}|p{7.9cm}| diff --git a/Documentation/userspace-api/media/v4l/dev-sdr.rst b/Documentation/userspace-api/media/v4l/dev-sdr.rst index 4a80319a53c6..80b25a7e8017 100644 --- a/Documentation/userspace-api/media/v4l/dev-sdr.rst +++ b/Documentation/userspace-api/media/v4l/dev-sdr.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _sdr: diff --git a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst index dd0b6646beb5..f0df144c9f63 100644 --- a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst +++ b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _sliced: @@ -34,7 +28,6 @@ however the default function here is video capturing or output. Different file descriptors must be used to pass raw and sliced VBI data simultaneously, if this is supported by the driver. - Querying Capabilities ===================== @@ -46,7 +39,6 @@ respectively, in the ``capabilities`` field of struct read/write, streaming or asynchronous :ref:`I/O methods <io>` must be supported. Sliced VBI devices may have a tuner or modulator. - Supplemental Functions ====================== @@ -56,7 +48,6 @@ capabilities, and they may support :ref:`control` ioctls. The :ref:`video standard <standard>` ioctls provide information vital to program a sliced VBI device, therefore must be supported. - .. _sliced-vbi-format-negotitation: Sliced VBI Format Negotiation @@ -103,9 +94,8 @@ at this point, it may return an ``EBUSY`` error code if the required resources are temporarily unavailable. Other resource allocation points which may return ``EBUSY`` can be the :ref:`VIDIOC_STREAMON` ioctl and the first -:ref:`read() <func-read>`, :ref:`write() <func-write>` and -:ref:`select() <func-select>` call. - +:c:func:`read()`, :c:func:`write()` and +:c:func:`select()` call. .. c:type:: v4l2_sliced_vbi_format @@ -127,7 +117,7 @@ struct v4l2_sliced_vbi_format :stub-columns: 0 :widths: 3 3 2 2 2 - * - __u32 + * - __u16 - ``service_set`` - :cspan:`2` @@ -198,7 +188,7 @@ struct v4l2_sliced_vbi_format * - __u32 - ``io_size`` - :cspan:`2` Maximum number of bytes passed by one - :ref:`read() <func-read>` or :ref:`write() <func-write>` call, + :c:func:`read()` or :c:func:`write()` call, and the buffer size in bytes for the :ref:`VIDIOC_QBUF` and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. Drivers set this field @@ -281,7 +271,6 @@ Sliced VBI services \normalsize - Drivers may return an ``EINVAL`` error code when applications attempt to read or write data without prior format negotiation, after switching the video standard (which may invalidate the negotiated VBI parameters) and @@ -291,13 +280,12 @@ return an ``EBUSY`` error code when applications attempt to change the format while i/o is in progress (between a :ref:`VIDIOC_STREAMON` and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` call, and after the first -:ref:`read() <func-read>` or :ref:`write() <func-write>` call). - +:c:func:`read()` or :c:func:`write()` call). Reading and writing sliced VBI data =================================== -A single :ref:`read() <func-read>` or :ref:`write() <func-write>` +A single :c:func:`read()` or :c:func:`write()` call must pass all data belonging to one video frame. That is an array of struct :c:type:`v4l2_sliced_vbi_data` structures with one or more elements and a total size not exceeding ``io_size`` bytes. Likewise @@ -305,7 +293,6 @@ in streaming I/O mode one buffer of ``io_size`` bytes must contain data of one video frame. The ``id`` of unused struct :c:type:`v4l2_sliced_vbi_data` elements must be zero. - .. c:type:: v4l2_sliced_vbi_data struct v4l2_sliced_vbi_data @@ -351,9 +338,8 @@ struct v4l2_sliced_vbi_data bytes at the end of this array are undefined, drivers and applications shall ignore them. - Packets are always passed in ascending line number order, without -duplicate line numbers. The :ref:`write() <func-write>` function and +duplicate line numbers. The :c:func:`write()` function and the :ref:`VIDIOC_QBUF` ioctl must return an ``EINVAL`` error code when applications violate this rule. They must also return an EINVAL error code when applications pass an incorrect field or line @@ -377,7 +363,6 @@ streaming (:ref:`memory mapping <mmap>` and/or :ref:`user pointer <userp>`) I/O. The latter bears the possibility of synchronizing video and VBI data by using buffer timestamps. - Sliced VBI Data in MPEG Streams =============================== @@ -412,7 +397,6 @@ data insertion is not supported by the device. The following subsections specify the format of the embedded sliced VBI data. - MPEG Stream Embedded, Sliced VBI Data Format: NONE -------------------------------------------------- @@ -424,7 +408,6 @@ nor driver shall insert "empty" embedded sliced VBI data packets in the MPEG stream when this format is set. No MPEG stream data structures are specified for this format. - MPEG Stream Embedded, Sliced VBI Data Format: IVTV -------------------------------------------------- @@ -467,7 +450,6 @@ the end with unspecified fill bytes to align the end of the payload to a with 18 lines/field with 43 bytes of data/line and a 4 byte magic number). - .. c:type:: v4l2_mpeg_vbi_fmt_ivtv struct v4l2_mpeg_vbi_fmt_ivtv @@ -530,7 +512,6 @@ Magic Constants for struct v4l2_mpeg_vbi_fmt_ivtv magic field valid and that 36 lines of sliced VBI data are present. - .. c:type:: v4l2_mpeg_vbi_itv0 .. c:type:: v4l2_mpeg_vbi_ITV0 @@ -555,7 +536,6 @@ structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0 value: - :: linemask[0] b0: line 6 first field @@ -581,7 +561,6 @@ structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0 applications. - .. _v4l2-mpeg-vbi-itv0-1: struct v4l2_mpeg_vbi_ITV0 @@ -603,7 +582,6 @@ struct v4l2_mpeg_vbi_ITV0 lines 6 through 23 of the second field. - .. c:type:: v4l2_mpeg_vbi_itv0_line struct v4l2_mpeg_vbi_itv0_line @@ -626,7 +604,6 @@ struct v4l2_mpeg_vbi_itv0_line - The sliced VBI data for the line. - .. _ITV0-Line-Identifier-Constants: Line Identifiers for struct v4l2_mpeg_vbi_itv0_line id field @@ -660,7 +637,6 @@ Line Identifiers for struct v4l2_mpeg_vbi_itv0_line id field description of the line payload. - .. [#f1] According to :ref:`ETS 300 706 <ets300706>` lines 6-22 of the first field and lines 5-22 of the second field may carry Teletext data. diff --git a/Documentation/userspace-api/media/v4l/dev-subdev.rst b/Documentation/userspace-api/media/v4l/dev-subdev.rst index 134d2fb909fa..2aa8157efae1 100644 --- a/Documentation/userspace-api/media/v4l/dev-subdev.rst +++ b/Documentation/userspace-api/media/v4l/dev-subdev.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _subdev: diff --git a/Documentation/userspace-api/media/v4l/dev-touch.rst b/Documentation/userspace-api/media/v4l/dev-touch.rst index c1ce446274f2..a71b9def5d58 100644 --- a/Documentation/userspace-api/media/v4l/dev-touch.rst +++ b/Documentation/userspace-api/media/v4l/dev-touch.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _touch: diff --git a/Documentation/userspace-api/media/v4l/devices.rst b/Documentation/userspace-api/media/v4l/devices.rst index 47ffe90753dd..8bfbad65a9d4 100644 --- a/Documentation/userspace-api/media/v4l/devices.rst +++ b/Documentation/userspace-api/media/v4l/devices.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _devices: diff --git a/Documentation/userspace-api/media/v4l/diff-v4l.rst b/Documentation/userspace-api/media/v4l/diff-v4l.rst index 37644d26c4ae..caa05fbbd396 100644 --- a/Documentation/userspace-api/media/v4l/diff-v4l.rst +++ b/Documentation/userspace-api/media/v4l/diff-v4l.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _diff-v4l: @@ -20,7 +14,6 @@ the much improved V4L2 API replaces the V4L API. The support for the old V4L calls were removed from Kernel, but the library :ref:`libv4l` supports the conversion of a V4L API system call into a V4L2 one. - Opening and Closing Devices =========================== @@ -39,7 +32,6 @@ recommend that V4L2 drivers by default register devices with the same numbers, but the system administrator can assign arbitrary minor numbers using driver module options. The major device number remains 81. - .. _v4l-dev: .. flat-table:: V4L Device Types, Names and Numbers @@ -60,14 +52,12 @@ using driver module options. The major device number remains 81. - ``/dev/vbi``, ``/dev/vbi0`` to ``/dev/vbi31`` - 224-255 - V4L prohibits (or used to prohibit) multiple opens of a device file. V4L2 drivers *may* support multiple opens, see :ref:`open` for details and consequences. V4L drivers respond to V4L2 ioctls with an ``EINVAL`` error code. - Querying Capabilities ===================== @@ -158,7 +148,6 @@ introduction. - ``-`` - See above. - The ``audios`` field was replaced by ``capabilities`` flag ``V4L2_CAP_AUDIO``, indicating *if* the device has any audio inputs or outputs. To determine their number applications can enumerate audio @@ -171,7 +160,6 @@ were removed. Calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` or dimensions returns the closest size possible, taking into account the current video standard, cropping and scaling limitations. - Video Sources ============= @@ -187,7 +175,6 @@ The ``channel`` field counting inputs was renamed to ``index``, the video input types were renamed as follows: - .. flat-table:: :header-rows: 1 :stub-columns: 0 @@ -199,7 +186,6 @@ video input types were renamed as follows: * - ``VIDEO_TYPE_CAMERA`` - ``V4L2_INPUT_TYPE_CAMERA`` - Unlike the ``tuners`` field expressing the number of tuners of this input, V4L2 assumes each video input is connected to at most one tuner. However a tuner can have more than one input, i. e. RF connectors, and a @@ -223,7 +209,6 @@ addition together with the ``norm`` field and has been removed in the meantime. V4L2 has a similar, albeit more comprehensive approach to video standards, see :ref:`standard` for more information. - Tuning ====== @@ -267,7 +252,6 @@ frequency where renamed to to a struct :c:type:`v4l2_frequency` instead of an unsigned long integer. - .. _v4l-image-properties: Image Properties @@ -281,7 +265,6 @@ replaced by V4L2 controls accessible with the :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls: - .. flat-table:: :header-rows: 1 :stub-columns: 0 @@ -299,7 +282,6 @@ replaced by V4L2 controls accessible with the * - ``whiteness`` - ``V4L2_CID_WHITENESS`` - The V4L picture controls are assumed to range from 0 to 65535 with no particular reset value. The V4L2 API permits arbitrary limits and defaults which can be queried with the @@ -313,7 +295,6 @@ of the image depth and others need not know. The ``palette`` field moved into the struct :c:type:`v4l2_pix_format`: - .. flat-table:: :header-rows: 1 :stub-columns: 0 @@ -353,11 +334,9 @@ into the struct :c:type:`v4l2_pix_format`: * - ``VIDEO_PALETTE_YUV410P`` - :ref:`V4L2_PIX_FMT_YVU410 <V4L2-PIX-FMT-YVU410>` - V4L2 image formats are defined in :ref:`pixfmt`. The image format can be selected with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. - Audio ===== @@ -391,7 +370,6 @@ The following fields where replaced by V4L2 controls accessible with the :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls: - .. flat-table:: :header-rows: 1 :stub-columns: 0 @@ -407,7 +385,6 @@ The following fields where replaced by V4L2 controls accessible with the * - ``balance`` - ``V4L2_CID_AUDIO_BALANCE`` - To determine which of these controls are supported by a driver V4L provides the ``flags`` ``VIDEO_AUDIO_VOLUME``, ``VIDEO_AUDIO_BASS``, ``VIDEO_AUDIO_TREBLE`` and ``VIDEO_AUDIO_BALANCE``. In the V4L2 API the @@ -423,7 +400,6 @@ V4L2 API permits arbitrary limits and defaults which can be queried with the :ref:`VIDIOC_QUERYCTRL` ioctl. For general information about controls see :ref:`control`. - Frame Buffer Overlay ==================== @@ -470,7 +446,6 @@ size is determined by ``w.width`` and ``w.height``. The ``VIDIOCCAPTURE`` ioctl to enable or disable overlay was renamed to :ref:`VIDIOC_OVERLAY`. - Cropping ======== @@ -497,21 +472,19 @@ struct :c:type:`v4l2_window`. These structures are used to select a capture or overlay format with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. - Reading Images, Memory Mapping ============================== - Capturing using the read method ------------------------------- There is no essential difference between reading images from a V4L or -V4L2 device using the :ref:`read() <func-read>` function, however V4L2 +V4L2 device using the :c:func:`read()` function, however V4L2 drivers are not required to support this I/O method. Applications can determine if the function is available with the :ref:`VIDIOC_QUERYCAP` ioctl. All V4L2 devices exchanging data with applications must support the -:ref:`select() <func-select>` and :ref:`poll() <func-poll>` +:c:func:`select()` and :c:func:`poll()` functions. To select an image format and size, V4L provides the ``VIDIOCSPICT`` and @@ -524,7 +497,6 @@ negotiation ioctls :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and For more information about the V4L2 read interface see :ref:`rw`. - Capturing using memory mapping ------------------------------ @@ -535,7 +507,6 @@ read method. V4L2 supports memory mapping as well, with a few differences. - .. flat-table:: :header-rows: 1 :stub-columns: 0 @@ -557,7 +528,7 @@ differences. ``VIDIOCGMBUF`` ioctl is available to query the number of buffers, the offset of each buffer from the start of the virtual file, and the overall amount of memory used, which can be used as arguments - for the :ref:`mmap() <func-mmap>` function. + for the :c:func:`mmap()` function. - Buffers are individually mapped. The offset and size of each buffer can be determined with the :ref:`VIDIOC_QUERYBUF` ioctl. @@ -575,7 +546,7 @@ differences. the incoming queue. Filled buffers are dequeued from the outgoing queue with the :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. To wait until filled buffers become available this function, - :ref:`select() <func-select>` or :ref:`poll() <func-poll>` can + :c:func:`select()` or :c:func:`poll()` can be used. The :ref:`VIDIOC_STREAMON` ioctl must be called once after enqueuing one or more buffers to start capturing. Its counterpart @@ -584,11 +555,9 @@ differences. signal status, if known, with the :ref:`VIDIOC_ENUMINPUT` ioctl. - For a more in-depth discussion of memory mapping and examples, see :ref:`mmap`. - Reading Raw VBI Data ==================== @@ -599,7 +568,6 @@ the V4L VBI interface. Reading from the device yields a raw VBI image with the following parameters: - .. flat-table:: :header-rows: 1 :stub-columns: 0 @@ -623,7 +591,6 @@ with the following parameters: * - flags - 0 - Undocumented in the V4L specification, in Linux 2.3 the ``VIDIOCGVBIFMT`` and ``VIDIOCSVBIFMT`` ioctls using struct ``vbi_format`` were added to determine the VBI image @@ -637,11 +604,10 @@ remaining fields are probably equivalent to struct Apparently only the Zoran (ZR 36120) driver implements these ioctls. The semantics differ from those specified for V4L2 in two ways. The -parameters are reset on :ref:`open() <func-open>` and +parameters are reset on :c:func:`open()` and ``VIDIOCSVBIFMT`` always returns an ``EINVAL`` error code if the parameters are invalid. - Miscellaneous ============= diff --git a/Documentation/userspace-api/media/v4l/dmabuf.rst b/Documentation/userspace-api/media/v4l/dmabuf.rst index 342421ff9497..50fba11c2477 100644 --- a/Documentation/userspace-api/media/v4l/dmabuf.rst +++ b/Documentation/userspace-api/media/v4l/dmabuf.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _dmabuf: @@ -43,7 +37,6 @@ are passed in struct :c:type:`v4l2_buffer` (or in struct driver must be switched into DMABUF I/O mode by calling the :ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>` with the desired buffer type. - Example: Initiating streaming I/O with DMABUF file descriptors ============================================================== @@ -142,10 +135,10 @@ buffers it must wait until an empty buffer can be dequeued and reused. Two methods exist to suspend execution of the application until one or more buffers can be dequeued. By default :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` blocks when no buffer is in the outgoing queue. When the -``O_NONBLOCK`` flag was given to the :ref:`open() <func-open>` function, +``O_NONBLOCK`` flag was given to the :c:func:`open()` function, :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN`` error code when no buffer is available. The -:ref:`select() <func-select>` and :ref:`poll() <func-poll>` +:c:func:`select()` and :c:func:`poll()` functions are always available. To start and stop capturing or displaying applications call the @@ -165,5 +158,5 @@ Drivers implementing DMABUF importing I/O must support the :ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`, :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls, -and the :ref:`select() <func-select>` and :ref:`poll() <func-poll>` +and the :c:func:`select()` and :c:func:`poll()` functions. diff --git a/Documentation/userspace-api/media/v4l/dv-timings.rst b/Documentation/userspace-api/media/v4l/dv-timings.rst index e216aa9edef0..e17f056b129f 100644 --- a/Documentation/userspace-api/media/v4l/dv-timings.rst +++ b/Documentation/userspace-api/media/v4l/dv-timings.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dv-timings: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst index d9a117f75c9c..c05a2d2c675d 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _camera-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index d0d506a444b1..ce728c757eaf 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _mpeg-controls: @@ -581,6 +574,8 @@ enum v4l2_mpeg_video_bitrate_mode - - Variable bitrate * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CBR`` - Constant bitrate + * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CQ`` + - Constant quality @@ -592,6 +587,48 @@ enum v4l2_mpeg_video_bitrate_mode - the average video bitrate. It is ignored if the video bitrate mode is set to constant bitrate. +``V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY (integer)`` + Constant quality level control. This control is applicable when + ``V4L2_CID_MPEG_VIDEO_BITRATE_MODE`` value is + ``V4L2_MPEG_VIDEO_BITRATE_MODE_CQ``. Valid range is 1 to 100 + where 1 indicates lowest quality and 100 indicates highest quality. + Encoder will decide the appropriate quantization parameter and + bitrate to produce requested frame quality. + + +``V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE (enum)`` + +enum v4l2_mpeg_video_frame_skip_mode - + Indicates in what conditions the encoder should skip frames. If + encoding a frame would cause the encoded stream to be larger then a + chosen data limit then the frame will be skipped. Possible values + are: + + +.. tabularcolumns:: |p{9.2cm}|p{8.3cm}| + +.. raw:: latex + + \small + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_FRAME_SKIP_MODE_DISABLED`` + - Frame skip mode is disabled. + * - ``V4L2_MPEG_FRAME_SKIP_MODE_LEVEL_LIMIT`` + - Frame skip mode enabled and buffer limit is set by the chosen + level and is defined by the standard. + * - ``V4L2_MPEG_FRAME_SKIP_MODE_BUF_LIMIT`` + - Frame skip mode enabled and buffer limit is set by the + :ref:`VBV (MPEG1/2/4) <v4l2-mpeg-video-vbv-size>` or + :ref:`CPB (H264) buffer size <v4l2-mpeg-video-h264-cpb-size>` control. + +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (integer)`` For every captured frame, skip this many subsequent frames (default 0). @@ -1163,6 +1200,8 @@ enum v4l2_mpeg_video_h264_entropy_mode - Quantization parameter for an B frame for MPEG4. Valid range: from 1 to 31. +.. _v4l2-mpeg-video-vbv-size: + ``V4L2_CID_MPEG_VIDEO_VBV_SIZE (integer)`` The Video Buffer Verifier size in kilobytes, it is used as a limitation of frame skip. The VBV is defined in the standard as a @@ -1200,6 +1239,8 @@ enum v4l2_mpeg_video_h264_entropy_mode - Force a key frame for the next queued buffer. Applicable to encoders. This is a general, codec-agnostic keyframe control. +.. _v4l2-mpeg-video-h264-cpb-size: + ``V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (integer)`` The Coded Picture Buffer size in kilobytes, it is used as a limitation of frame skip. The CPB is defined in the H264 standard as @@ -1695,9 +1736,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE`` - 0x00000040 - - * - ``V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT`` + * - ``V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT`` - 0x00000080 - - + - Indicates that ``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX`` + must be used for this picture. ``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)`` Specifies the scaling matrix (as extracted from the bitstream) for @@ -1725,12 +1767,14 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - - ``scaling_list_4x4[6][16]`` - Scaling matrix after applying the inverse scanning process. Expected list order is Intra Y, Intra Cb, Intra Cr, Inter Y, - Inter Cb, Inter Cr. + Inter Cb, Inter Cr. The values on each scaling list are + expected in raster scan order. * - __u8 - ``scaling_list_8x8[6][64]`` - Scaling matrix after applying the inverse scanning process. Expected list order is Intra Y, Inter Y, Intra Cb, Inter Cb, - Intra Cr, Inter Cr. + Intra Cr, Inter Cr. The values on each scaling list are + expected in raster scan order. ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)`` Specifies the slice parameters (as extracted from the bitstream) @@ -1746,9 +1790,6 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - This compound control is not yet part of the public kernel API and it is expected to change. - This structure is expected to be passed as an array, with one - entry for each slice included in the bitstream buffer. - .. c:type:: v4l2_ctrl_h264_slice_params .. cssclass:: longtable @@ -1759,61 +1800,20 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - :widths: 1 1 2 * - __u32 - - ``size`` - - - * - __u32 - - ``start_byte_offset`` - Offset (in bytes) from the beginning of the OUTPUT buffer to the start - of the slice. If the slice starts with a start code, then this is the - offset to such start code. When operating in slice-based decoding mode - (see :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field should - be set to 0. When operating in frame-based decoding mode, this field - should be 0 for the first slice. - * - __u32 - ``header_bit_size`` - - - * - __u16 + - Offset in bits to slice_data() from the beginning of this slice. + * - __u32 - ``first_mb_in_slice`` - * - __u8 - ``slice_type`` - * - __u8 - - ``pic_parameter_set_id`` - - - * - __u8 - ``colour_plane_id`` - * - __u8 - ``redundant_pic_cnt`` - - * - __u16 - - ``frame_num`` - - - * - __u16 - - ``idr_pic_id`` - - - * - __u16 - - ``pic_order_cnt_lsb`` - - - * - __s32 - - ``delta_pic_order_cnt_bottom`` - - - * - __s32 - - ``delta_pic_order_cnt0`` - - - * - __s32 - - ``delta_pic_order_cnt1`` - - - * - struct :c:type:`v4l2_h264_pred_weight_table` - - ``pred_weight_table`` - - - * - __u32 - - ``dec_ref_pic_marking_bit_size`` - - Size in bits of the dec_ref_pic_marking() syntax element. - * - __u32 - - ``pic_order_cnt_bit_size`` - - * - __u8 - ``cabac_init_idc`` - @@ -1840,13 +1840,13 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - - ``num_ref_idx_l1_active_minus1`` - If num_ref_idx_active_override_flag is not set, this field must be set to the value of num_ref_idx_l1_default_active_minus1. - * - __u32 - - ``slice_group_change_cycle`` - - * - __u8 + - ``reserved`` + - Applications and drivers must set this to zero. + * - struct :c:type:`v4l2_h264_reference` - ``ref_pic_list0[32]`` - Reference picture list after applying the per-slice modifications - * - __u8 + * - struct :c:type:`v4l2_h264_reference` - ``ref_pic_list1[32]`` - Reference picture list after applying the per-slice modifications * - __u32 @@ -1864,31 +1864,30 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - :stub-columns: 0 :widths: 1 1 2 - * - ``V4L2_H264_SLICE_FLAG_FIELD_PIC`` - - 0x00000001 - - - * - ``V4L2_H264_SLICE_FLAG_BOTTOM_FIELD`` - - 0x00000002 - - * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED`` - - 0x00000004 + - 0x00000001 - * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH`` - - 0x00000008 + - 0x00000002 - -``Prediction Weight Table`` +``V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS (struct)`` + Prediction weight table defined according to :ref:`h264`, + section 7.4.3.2 "Prediction Weight Table Semantics". + The prediction weight table must be passed by applications + under the conditions explained in section 7.3.3 "Slice header + syntax". - The bitstream parameters are defined according to :ref:`h264`, - section 7.4.3.2 "Prediction Weight Table Semantics". For further - documentation, refer to the above specification, unless there is - an explicit comment stating otherwise. + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. -.. c:type:: v4l2_h264_pred_weight_table +.. c:type:: v4l2_ctrl_h264_pred_weights .. cssclass:: longtable -.. flat-table:: struct v4l2_h264_pred_weight_table +.. flat-table:: struct v4l2_ctrl_h264_pred_weights :header-rows: 0 :stub-columns: 0 :widths: 1 1 2 @@ -1926,6 +1925,46 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - - ``chroma_offset[32][2]`` - +``Picture Reference`` + +.. c:type:: v4l2_h264_reference + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_h264_reference + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``fields`` + - Specifies how the picture is referenced. See :ref:`Reference Fields <h264_ref_fields>` + * - __u8 + - ``index`` + - Index into the :c:type:`v4l2_ctrl_h264_decode_params`.dpb array. + +.. _h264_ref_fields: + +``Reference Fields`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_H264_TOP_FIELD_REF`` + - 0x1 + - The top field in field pair is used for short-term reference. + * - ``V4L2_H264_BOTTOM_FIELD_REF`` + - 0x2 + - The bottom field in field pair is used for short-term reference. + * - ``V4L2_H264_FRAME_REF`` + - 0x3 + - The frame (or the top/bottom fields, if it's a field pair) + is used for short-term reference. + ``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)`` Specifies the decode parameters (as extracted from the bitstream) for the associated H264 slice data. This includes the necessary @@ -1953,20 +1992,46 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - - ``dpb[16]`` - * - __u16 - - ``num_slices`` - - Number of slices needed to decode the current frame/field. When - operating in slice-based decoding mode (see - :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field - should always be set to one. - * - __u16 - ``nal_ref_idc`` - NAL reference ID value coming from the NAL Unit header + * - __u16 + - ``frame_num`` + - * - __s32 - ``top_field_order_cnt`` - Picture Order Count for the coded top field * - __s32 - ``bottom_field_order_cnt`` - Picture Order Count for the coded bottom field + * - __u16 + - ``idr_pic_id`` + - + * - __u16 + - ``pic_order_cnt_lsb`` + - + * - __s32 + - ``delta_pic_order_cnt_bottom`` + - + * - __s32 + - ``delta_pic_order_cnt0`` + - + * - __s32 + - ``delta_pic_order_cnt1`` + - + * - __u32 + - ``dec_ref_pic_marking_bit_size`` + - Size in bits of the dec_ref_pic_marking() syntax element. + * - __u32 + - ``pic_order_cnt_bit_size`` + - Combined size in bits of the picture order count related syntax + elements: pic_order_cnt_lsb, delta_pic_order_cnt_bottom, + delta_pic_order_cnt0, and delta_pic_order_cnt1. + * - __u32 + - ``slice_group_change_cycle`` + - + * - __u32 + - ``reserved`` + - Applications and drivers must set this to zero. * - __u32 - ``flags`` - See :ref:`Decode Parameters Flags <h264_decode_params_flags>` @@ -1985,6 +2050,12 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - * - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC`` - 0x00000001 - That picture is an IDR picture + * - ``V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC`` + - 0x00000002 + - + * - ``V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD`` + - 0x00000004 + - .. c:type:: v4l2_h264_dpb_entry @@ -2002,12 +2073,18 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` function to convert the struct :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. - * - __u16 - - ``frame_num`` + * - __u32 + - ``pic_num`` - * - __u16 - - ``pic_num`` + - ``frame_num`` - + * - __u8 + - ``fields`` + - Specifies how the DPB entry is referenced. See :ref:`Reference Fields <h264_ref_fields>` + * - __u8 + - ``reserved[5]`` + - Applications and drivers must set this to zero. * - __s32 - ``top_field_order_cnt`` - @@ -2031,29 +2108,16 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID`` - 0x00000001 - - The DPB entry is valid and should be considered + - The DPB entry is valid (non-empty) and should be considered. * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE`` - 0x00000002 - - The DPB entry is currently being used as a reference frame + - The DPB entry is used for reference. * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM`` - 0x00000004 - - The DPB entry is a long term reference frame + - The DPB entry is used for long-term reference. * - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD`` - 0x00000008 - - The DPB entry is a field reference, which means only one of the field - will be used when decoding the new frame/field. When not set the DPB - entry is a frame reference (both fields will be used). Note that this - flag does not say anything about the number of fields contained in the - reference frame, it just describes the one used to decode the new - field/frame - * - ``V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD`` - - 0x00000010 - - The DPB entry is a bottom field reference (only the bottom field of the - reference frame is needed to decode the new frame/field). Only valid if - V4L2_H264_DPB_ENTRY_FLAG_FIELD is set. When - V4L2_H264_DPB_ENTRY_FLAG_FIELD is set but - V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD is not, that means the - DPB entry is a top field reference + - The DPB entry is a single field or a complementary field pair. ``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)`` Specifies the decoding mode to use. Currently exposes slice-based and @@ -2082,22 +2146,20 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED`` - 0 - Decoding is done at the slice granularity. - In this mode, ``num_slices`` field in struct - :c:type:`v4l2_ctrl_h264_decode_params` should be set to 1, - and ``start_byte_offset`` in struct - :c:type:`v4l2_ctrl_h264_slice_params` should be set to 0. The OUTPUT buffer must contain a single slice. + When this mode is selected, the ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS`` + control shall be set. When multiple slices compose a frame, + use of ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` flag + is required. * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED`` - 1 - - Decoding is done at the frame granularity. - In this mode, ``num_slices`` field in struct - :c:type:`v4l2_ctrl_h264_decode_params` should be set to the number - of slices in the frame, and ``start_byte_offset`` in struct - :c:type:`v4l2_ctrl_h264_slice_params` should be set accordingly - for each slice. For the first slice, ``start_byte_offset`` should - be zero. + - Decoding is done at the frame granularity, The OUTPUT buffer must contain all slices needed to decode the frame. The OUTPUT buffer must also contain both fields. + This mode will be supported by devices that + parse the slice(s) header(s) in hardware. When this mode is + selected, the ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS`` + control shall not be set. ``V4L2_CID_MPEG_VIDEO_H264_START_CODE (enum)`` Specifies the H264 slice start code expected for each slice. @@ -2773,6 +2835,11 @@ MFC 5.1 Control IDs ``V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE`` (enum) + .. note:: + + This control is deprecated. Use the standard + ``V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE`` control instead. + enum v4l2_mpeg_mfc51_video_frame_skip_mode - Indicates in what conditions the encoder should skip frames. If encoding a frame would cause the encoded stream to be larger then a @@ -3316,6 +3383,49 @@ enum v4l2_mpeg_video_vp9_profile - * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3`` - Profile 3 +.. _v4l2-mpeg-video-vp9-level: + +``V4L2_CID_MPEG_VIDEO_VP9_LEVEL (enum)`` + +enum v4l2_mpeg_video_vp9_level - + This control allows selecting the level for VP9 encoder. + This is also used to enumerate supported levels by VP9 encoder or decoder. + More information can be found at + `webmproject <https://www.webmproject.org/vp9/levels/>`__. Possible values are: + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_0`` + - Level 1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_1`` + - Level 1.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_0`` + - Level 2 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_1`` + - Level 2.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_0`` + - Level 3 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_1`` + - Level 3.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_0`` + - Level 4 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_1`` + - Level 4.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_0`` + - Level 5 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_1`` + - Level 5.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_2`` + - Level 5.2 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_0`` + - Level 6 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_1`` + - Level 6.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_2`` + - Level 6.2 + High Efficiency Video Coding (HEVC/H.265) Control Reference =========================================================== diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst index 77a4992f26bd..312c4fa94dc3 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _detect-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst index c572b65dc772..a6f696bf89dd 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _dv-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst index 5053a380f7de..ad4b878cd034 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _flash-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst index 69197bbe23dd..b6cfc0e823d2 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _fm-rx-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst index c13ec0a6af3a..04c997c9a4c3 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _fm-tx-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst index bb9d484c25e4..87698c15c027 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _image-process-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst index 7b75158aca4d..9457dc340c31 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _image-source-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst index 5ea69978f3ea..e07a2dbcd65d 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _jpeg-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-rf-tuner.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-rf-tuner.rst index 5277138fce67..8a6f9f0373ff 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-rf-tuner.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-rf-tuner.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _rf-tuner-controls: diff --git a/Documentation/userspace-api/media/v4l/extended-controls.rst b/Documentation/userspace-api/media/v4l/extended-controls.rst index 9aa352ac5ea4..70301538d222 100644 --- a/Documentation/userspace-api/media/v4l/extended-controls.rst +++ b/Documentation/userspace-api/media/v4l/extended-controls.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _extended-controls: diff --git a/Documentation/userspace-api/media/v4l/field-order.rst b/Documentation/userspace-api/media/v4l/field-order.rst index 04e9a6932dc5..54548ea4308c 100644 --- a/Documentation/userspace-api/media/v4l/field-order.rst +++ b/Documentation/userspace-api/media/v4l/field-order.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _field-order: diff --git a/Documentation/userspace-api/media/v4l/fieldseq_bt.svg b/Documentation/userspace-api/media/v4l/fieldseq_bt.svg index b663f6fcb70b..91ac2813b454 100644 --- a/Documentation/userspace-api/media/v4l/fieldseq_bt.svg +++ b/Documentation/userspace-api/media/v4l/fieldseq_bt.svg @@ -1,14 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- - Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later --> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/userspace-api/media/v4l/fieldseq_tb.svg b/Documentation/userspace-api/media/v4l/fieldseq_tb.svg index f8b440a1cb60..7b4f8fb33757 100644 --- a/Documentation/userspace-api/media/v4l/fieldseq_tb.svg +++ b/Documentation/userspace-api/media/v4l/fieldseq_tb.svg @@ -1,14 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- - Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later --> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/userspace-api/media/v4l/format.rst b/Documentation/userspace-api/media/v4l/format.rst index e47fc0505727..35bbb2fea46e 100644 --- a/Documentation/userspace-api/media/v4l/format.rst +++ b/Documentation/userspace-api/media/v4l/format.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _format: @@ -13,7 +7,6 @@ Data Formats ************ - Data Format Negotiation ======================= @@ -60,8 +53,8 @@ image size. When applications omit the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl its locking side effects are implied by the next step, the selection of an I/O method with the :ref:`VIDIOC_REQBUFS` ioctl or implicit -with the first :ref:`read() <func-read>` or -:ref:`write() <func-write>` call. +with the first :c:func:`read()` or +:c:func:`write()` call. Generally only one logical stream can be assigned to a file descriptor, the exception being drivers permitting simultaneous video capturing and @@ -74,7 +67,6 @@ All drivers exchanging data with applications must support the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. Implementation of the :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is highly recommended but optional. - Image Format Enumeration ======================== diff --git a/Documentation/userspace-api/media/v4l/func-close.rst b/Documentation/userspace-api/media/v4l/func-close.rst index 37a64dae56b0..dba3263fd1b9 100644 --- a/Documentation/userspace-api/media/v4l/func-close.rst +++ b/Documentation/userspace-api/media/v4l/func-close.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _func-close: @@ -18,7 +12,6 @@ Name v4l2-close - Close a V4L2 device - Synopsis ======== @@ -26,16 +19,13 @@ Synopsis #include <unistd.h> - .. c:function:: int close( int fd ) - :name: v4l2-close Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. - + File descriptor returned by :c:func:`open()`. Description =========== @@ -45,7 +35,6 @@ associated with the file descriptor are freed. However data format parameters, current input or output, control values or other properties remain unchanged. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/func-ioctl.rst b/Documentation/userspace-api/media/v4l/func-ioctl.rst index 4e69f303636b..f3b005094334 100644 --- a/Documentation/userspace-api/media/v4l/func-ioctl.rst +++ b/Documentation/userspace-api/media/v4l/func-ioctl.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _func-ioctl: @@ -18,7 +12,6 @@ Name v4l2-ioctl - Program a V4L2 device - Synopsis ======== @@ -26,15 +19,13 @@ Synopsis #include <sys/ioctl.h> - -.. c:function:: int ioctl( int fd, int request, void *argp ) - :name: v4l2-ioctl +``int ioctl(int fd, int request, void *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``request`` V4L2 ioctl request code as defined in the ``videodev2.h`` header @@ -43,7 +34,6 @@ Arguments ``argp`` Pointer to a function parameter, usually a structure. - Description =========== @@ -57,7 +47,6 @@ include the version in the kernel sources on the system they compile on. All V4L2 ioctl requests, their respective function and parameters are specified in :ref:`user-func`. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/func-mmap.rst b/Documentation/userspace-api/media/v4l/func-mmap.rst index f9c77bdce434..e3e5e64ebe7e 100644 --- a/Documentation/userspace-api/media/v4l/func-mmap.rst +++ b/Documentation/userspace-api/media/v4l/func-mmap.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _func-mmap: @@ -18,7 +12,6 @@ Name v4l2-mmap - Map device memory into application address space - Synopsis ======== @@ -27,9 +20,7 @@ Synopsis #include <unistd.h> #include <sys/mman.h> - .. c:function:: void *mmap( void *start, size_t length, int prot, int flags, int fd, off_t offset ) - :name: v4l2-mmap Arguments ========= @@ -61,7 +52,7 @@ Arguments #. The Linux ``videobuf`` kernel module, which is used by some drivers supports only ``PROT_READ`` | ``PROT_WRITE``. When the driver does not support the desired protection, the - :ref:`mmap() <func-mmap>` function fails. + :c:func:`mmap()` function fails. #. Device memory accesses (e. g. the memory on a graphics card with video capturing hardware) may incur a performance penalty @@ -77,7 +68,7 @@ Arguments ``MAP_FIXED`` requests that the driver selects no other address than the one specified. If the specified address cannot be used, - :ref:`mmap() <func-mmap>` will fail. If ``MAP_FIXED`` is specified, + :c:func:`mmap()` will fail. If ``MAP_FIXED`` is specified, ``start`` must be a multiple of the pagesize. Use of this option is discouraged. @@ -94,7 +85,7 @@ Arguments flags. ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``offset`` Offset of the buffer in device memory. This must be the same value @@ -104,11 +95,10 @@ Arguments in the struct :c:type:`v4l2_plane` ``m`` union ``mem_offset`` field for the multi-planar API. - Description =========== -The :ref:`mmap() <func-mmap>` function asks to map ``length`` bytes starting at +The :c:func:`mmap()` function asks to map ``length`` bytes starting at ``offset`` in the memory of the device specified by ``fd`` into the application address space, preferably at address ``start``. This latter address is a hint only, and is usually specified as 0. @@ -118,13 +108,12 @@ Suitable length and offset parameters are queried with the allocated with the :ref:`VIDIOC_REQBUFS` ioctl before they can be queried. -To unmap buffers the :ref:`munmap() <func-munmap>` function is used. - +To unmap buffers the :c:func:`munmap()` function is used. Return Value ============ -On success :ref:`mmap() <func-mmap>` returns a pointer to the mapped buffer. On +On success :c:func:`mmap()` returns a pointer to the mapped buffer. On error ``MAP_FAILED`` (-1) is returned, and the ``errno`` variable is set appropriately. Possible error codes are: diff --git a/Documentation/userspace-api/media/v4l/func-munmap.rst b/Documentation/userspace-api/media/v4l/func-munmap.rst index 18a9941b47ab..077d58333904 100644 --- a/Documentation/userspace-api/media/v4l/func-munmap.rst +++ b/Documentation/userspace-api/media/v4l/func-munmap.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _func-munmap: @@ -18,7 +12,6 @@ Name v4l2-munmap - Unmap device memory - Synopsis ======== @@ -27,37 +20,33 @@ Synopsis #include <unistd.h> #include <sys/mman.h> - .. c:function:: int munmap( void *start, size_t length ) - :name: v4l2-munmap Arguments ========= ``start`` Address of the mapped buffer as returned by the - :ref:`mmap() <func-mmap>` function. + :c:func:`mmap()` function. ``length`` Length of the mapped buffer. This must be the same value as given to - :ref:`mmap() <func-mmap>` and returned by the driver in the struct + :c:func:`mmap()` and returned by the driver in the struct :c:type:`v4l2_buffer` ``length`` field for the single-planar API and in the struct :c:type:`v4l2_plane` ``length`` field for the multi-planar API. - Description =========== -Unmaps a previously with the :ref:`mmap() <func-mmap>` function mapped +Unmaps a previously with the :c:func:`mmap()` function mapped buffer and frees it, if possible. - Return Value ============ -On success :ref:`munmap() <func-munmap>` returns 0, on failure -1 and the +On success :c:func:`munmap()` returns 0, on failure -1 and the ``errno`` variable is set appropriately: EINVAL diff --git a/Documentation/userspace-api/media/v4l/func-open.rst b/Documentation/userspace-api/media/v4l/func-open.rst index 8bcdec8ab387..ba23ff1e45dd 100644 --- a/Documentation/userspace-api/media/v4l/func-open.rst +++ b/Documentation/userspace-api/media/v4l/func-open.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _func-open: @@ -18,7 +12,6 @@ Name v4l2-open - Open a V4L2 device - Synopsis ======== @@ -26,9 +19,7 @@ Synopsis #include <fcntl.h> - .. c:function:: int open( const char *device_name, int flags ) - :name: v4l2-open Arguments ========= @@ -41,7 +32,7 @@ Arguments technicality, input devices still support only reading and output devices only writing. - When the ``O_NONBLOCK`` flag is given, the :ref:`read() <func-read>` + When the ``O_NONBLOCK`` flag is given, the :c:func:`read()` function and the :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl will return the ``EAGAIN`` error code when no data is available or no buffer is in the driver outgoing queue, otherwise these functions @@ -50,22 +41,20 @@ Arguments Other flags have no effect. - Description =========== -To open a V4L2 device applications call :ref:`open() <func-open>` with the +To open a V4L2 device applications call :c:func:`open()` with the desired device name. This function has no side effects; all data format parameters, current input or output, control values or other properties -remain unchanged. At the first :ref:`open() <func-open>` call after loading the +remain unchanged. At the first :c:func:`open()` call after loading the driver they will be reset to default values, drivers are never in an undefined state. - Return Value ============ -On success :ref:`open() <func-open>` returns the new file descriptor. On error +On success :c:func:`open()` returns the new file descriptor. On error -1 is returned, and the ``errno`` variable is set appropriately. Possible error codes are: diff --git a/Documentation/userspace-api/media/v4l/func-poll.rst b/Documentation/userspace-api/media/v4l/func-poll.rst index 2c6704c1fab7..cbf4a0a10ae2 100644 --- a/Documentation/userspace-api/media/v4l/func-poll.rst +++ b/Documentation/userspace-api/media/v4l/func-poll.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _func-poll: @@ -18,7 +12,6 @@ Name v4l2-poll - Wait for some event on a file descriptor - Synopsis ======== @@ -26,19 +19,16 @@ Synopsis #include <sys/poll.h> - .. c:function:: int poll( struct pollfd *ufds, unsigned int nfds, int timeout ) - :name: v4l2-poll Arguments ========= - Description =========== -With the :ref:`poll() <func-poll>` function applications can suspend execution +With the :c:func:`poll()` function applications can suspend execution until the driver has captured data or is ready to accept data for output. @@ -51,57 +41,56 @@ display. When buffers are already in the outgoing queue of the driver (capture) or the incoming queue isn't full (display) the function returns immediately. -On success :ref:`poll() <func-poll>` returns the number of file descriptors +On success :c:func:`poll()` returns the number of file descriptors that have been selected (that is, file descriptors for which the -``revents`` field of the respective :c:func:`struct pollfd` structure +``revents`` field of the respective ``struct pollfd`` structure is non-zero). Capture devices set the ``POLLIN`` and ``POLLRDNORM`` flags in the ``revents`` field, output devices the ``POLLOUT`` and ``POLLWRNORM`` flags. When the function timed out it returns a value of zero, on failure it returns -1 and the ``errno`` variable is set appropriately. When the application did not call -:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` the :ref:`poll() <func-poll>` +:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` the :c:func:`poll()` function succeeds, but sets the ``POLLERR`` flag in the ``revents`` field. When the application has called :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` for a capture device but hasn't yet called :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`, the -:ref:`poll() <func-poll>` function succeeds and sets the ``POLLERR`` flag in +:c:func:`poll()` function succeeds and sets the ``POLLERR`` flag in the ``revents`` field. For output devices this same situation will cause -:ref:`poll() <func-poll>` to succeed as well, but it sets the ``POLLOUT`` and +:c:func:`poll()` to succeed as well, but it sets the ``POLLOUT`` and ``POLLWRNORM`` flags in the ``revents`` field. If an event occurred (see :ref:`VIDIOC_DQEVENT`) then ``POLLPRI`` will be set in the ``revents`` field and -:ref:`poll() <func-poll>` will return. +:c:func:`poll()` will return. -When use of the :ref:`read() <func-read>` function has been negotiated and the -driver does not capture yet, the :ref:`poll() <func-poll>` function starts +When use of the :c:func:`read()` function has been negotiated and the +driver does not capture yet, the :c:func:`poll()` function starts capturing. When that fails it returns a ``POLLERR`` as above. Otherwise it waits until data has been captured and can be read. When the driver captures continuously (as opposed to, for example, still images) the function may return immediately. -When use of the :ref:`write() <func-write>` function has been negotiated and the -driver does not stream yet, the :ref:`poll() <func-poll>` function starts +When use of the :c:func:`write()` function has been negotiated and the +driver does not stream yet, the :c:func:`poll()` function starts streaming. When that fails it returns a ``POLLERR`` as above. Otherwise it waits until the driver is ready for a non-blocking -:ref:`write() <func-write>` call. +:c:func:`write()` call. If the caller is only interested in events (just ``POLLPRI`` is set in -the ``events`` field), then :ref:`poll() <func-poll>` will *not* start +the ``events`` field), then :c:func:`poll()` will *not* start streaming if the driver does not stream yet. This makes it possible to just poll for events and not for buffers. -All drivers implementing the :ref:`read() <func-read>` or :ref:`write() <func-write>` -function or streaming I/O must also support the :ref:`poll() <func-poll>` +All drivers implementing the :c:func:`read()` or :c:func:`write()` +function or streaming I/O must also support the :c:func:`poll()` function. -For more details see the :ref:`poll() <func-poll>` manual page. - +For more details see the :c:func:`poll()` manual page. Return Value ============ -On success, :ref:`poll() <func-poll>` returns the number structures which have +On success, :c:func:`poll()` returns the number structures which have non-zero ``revents`` fields, or zero if the call timed out. On error -1 is returned, and the ``errno`` variable is set appropriately: diff --git a/Documentation/userspace-api/media/v4l/func-read.rst b/Documentation/userspace-api/media/v4l/func-read.rst index 1728aa5d8313..e6f6ac4bed77 100644 --- a/Documentation/userspace-api/media/v4l/func-read.rst +++ b/Documentation/userspace-api/media/v4l/func-read.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _func-read: @@ -18,7 +12,6 @@ Name v4l2-read - Read from a V4L2 device - Synopsis ======== @@ -26,15 +19,13 @@ Synopsis #include <unistd.h> - .. c:function:: ssize_t read( int fd, void *buf, size_t count ) - :name: v4l2-read Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``buf`` Buffer to be filled @@ -45,48 +36,48 @@ Arguments Description =========== -:ref:`read() <func-read>` attempts to read up to ``count`` bytes from file +:c:func:`read()` attempts to read up to ``count`` bytes from file descriptor ``fd`` into the buffer starting at ``buf``. The layout of the data in the buffer is discussed in the respective device interface -section, see ##. If ``count`` is zero, :ref:`read() <func-read>` returns zero +section, see ##. If ``count`` is zero, :c:func:`read()` returns zero and has no other results. If ``count`` is greater than ``SSIZE_MAX``, the result is unspecified. Regardless of the ``count`` value each -:ref:`read() <func-read>` call will provide at most one frame (two fields) +:c:func:`read()` call will provide at most one frame (two fields) worth of data. -By default :ref:`read() <func-read>` blocks until data becomes available. When -the ``O_NONBLOCK`` flag was given to the :ref:`open() <func-open>` +By default :c:func:`read()` blocks until data becomes available. When +the ``O_NONBLOCK`` flag was given to the :c:func:`open()` function it returns immediately with an ``EAGAIN`` error code when no data -is available. The :ref:`select() <func-select>` or -:ref:`poll() <func-poll>` functions can always be used to suspend +is available. The :c:func:`select()` or +:c:func:`poll()` functions can always be used to suspend execution until data becomes available. All drivers supporting the -:ref:`read() <func-read>` function must also support :ref:`select() <func-select>` and -:ref:`poll() <func-poll>`. +:c:func:`read()` function must also support :c:func:`select()` and +:c:func:`poll()`. Drivers can implement read functionality in different ways, using a single or multiple buffers and discarding the oldest or newest frames once the internal buffers are filled. -:ref:`read() <func-read>` never returns a "snapshot" of a buffer being filled. +:c:func:`read()` never returns a "snapshot" of a buffer being filled. Using a single buffer the driver will stop capturing when the application starts reading the buffer until the read is finished. Thus only the period of the vertical blanking interval is available for reading, or the capture rate must fall below the nominal frame rate of the video standard. -The behavior of :ref:`read() <func-read>` when called during the active picture +The behavior of :c:func:`read()` when called during the active picture period or the vertical blanking separating the top and bottom field depends on the discarding policy. A driver discarding the oldest frames keeps capturing into an internal buffer, continuously overwriting the previously, not read frame, and returns the frame being received at the -time of the :ref:`read() <func-read>` call as soon as it is complete. +time of the :c:func:`read()` call as soon as it is complete. A driver discarding the newest frames stops capturing until the next -:ref:`read() <func-read>` call. The frame being received at :ref:`read() <func-read>` +:c:func:`read()` call. The frame being received at :c:func:`read()` time is discarded, returning the following frame instead. Again this implies a reduction of the capture rate to one half or less of the nominal frame rate. An example of this model is the video read mode of -the bttv driver, initiating a DMA to user memory when :ref:`read() <func-read>` +the bttv driver, initiating a DMA to user memory when :c:func:`read()` is called and returning when the DMA finished. In the multiple buffer model drivers maintain a ring of internal @@ -101,14 +92,13 @@ the driver with the :ref:`VIDIOC_G_PARM <VIDIOC_G_PARM>` and however. The discarding policy is not reported and cannot be changed. For minimum requirements see :ref:`devices`. - Return Value ============ On success, the number of bytes read is returned. It is not an error if this number is smaller than the number of bytes requested, or the amount of data required for one frame. This may happen for example because -:ref:`read() <func-read>` was interrupted by a signal. On error, -1 is +:c:func:`read()` was interrupted by a signal. On error, -1 is returned, and the ``errno`` variable is set appropriately. In this case the next read will start at the beginning of a new frame. Possible error codes are: @@ -136,5 +126,5 @@ EIO communicate with a remote device (USB camera etc.). EINVAL - The :ref:`read() <func-read>` function is not supported by this driver, not + The :c:func:`read()` function is not supported by this driver, not on this device, or generally not on this type of device. diff --git a/Documentation/userspace-api/media/v4l/func-select.rst b/Documentation/userspace-api/media/v4l/func-select.rst index 6aca8a290c1f..ba1879c728f0 100644 --- a/Documentation/userspace-api/media/v4l/func-select.rst +++ b/Documentation/userspace-api/media/v4l/func-select.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _func-select: @@ -18,7 +12,6 @@ Name v4l2-select - Synchronous I/O multiplexing - Synopsis ======== @@ -28,9 +21,7 @@ Synopsis #include <sys/types.h> #include <unistd.h> - .. c:function:: int select( int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout ) - :name: v4l2-select Arguments ========= @@ -50,11 +41,10 @@ Arguments ``timeout`` Maximum time to wait. - Description =========== -With the :ref:`select() <func-select>` function applications can suspend +With the :c:func:`select()` function applications can suspend execution until the driver has captured data or is ready to accept data for output. @@ -63,40 +53,39 @@ buffer has been filled or displayed and can be dequeued with the :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. When buffers are already in the outgoing queue of the driver the function returns immediately. -On success :ref:`select() <func-select>` returns the total number of bits set in -:c:func:`struct fd_set`. When the function timed out it returns +On success :c:func:`select()` returns the total number of bits set in +``fd_set``. When the function timed out it returns a value of zero. On failure it returns -1 and the ``errno`` variable is set appropriately. When the application did not call :ref:`VIDIOC_QBUF` or -:ref:`VIDIOC_STREAMON` yet the :ref:`select() <func-select>` +:ref:`VIDIOC_STREAMON` yet the :c:func:`select()` function succeeds, setting the bit of the file descriptor in ``readfds`` or ``writefds``, but subsequent :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` calls will fail. [#f1]_ -When use of the :ref:`read() <func-read>` function has been negotiated and the -driver does not capture yet, the :ref:`select() <func-select>` function starts -capturing. When that fails, :ref:`select() <func-select>` returns successful and -a subsequent :ref:`read() <func-read>` call, which also attempts to start +When use of the :c:func:`read()` function has been negotiated and the +driver does not capture yet, the :c:func:`select()` function starts +capturing. When that fails, :c:func:`select()` returns successful and +a subsequent :c:func:`read()` call, which also attempts to start capturing, will return an appropriate error code. When the driver captures continuously (as opposed to, for example, still images) and -data is already available the :ref:`select() <func-select>` function returns +data is already available the :c:func:`select()` function returns immediately. -When use of the :ref:`write() <func-write>` function has been negotiated the -:ref:`select() <func-select>` function just waits until the driver is ready for a -non-blocking :ref:`write() <func-write>` call. +When use of the :c:func:`write()` function has been negotiated the +:c:func:`select()` function just waits until the driver is ready for a +non-blocking :c:func:`write()` call. -All drivers implementing the :ref:`read() <func-read>` or :ref:`write() <func-write>` -function or streaming I/O must also support the :ref:`select() <func-select>` +All drivers implementing the :c:func:`read()` or :c:func:`write()` +function or streaming I/O must also support the :c:func:`select()` function. -For more details see the :ref:`select() <func-select>` manual page. - +For more details see the :c:func:`select()` manual page. Return Value ============ -On success, :ref:`select() <func-select>` returns the number of descriptors +On success, :c:func:`select()` returns the number of descriptors contained in the three returned descriptor sets, which will be zero if the timeout expired. On error -1 is returned, and the ``errno`` variable is set appropriately; the sets and ``timeout`` are undefined. Possible @@ -122,6 +111,6 @@ EINVAL ``FD_SETSIZE``. .. [#f1] - The Linux kernel implements :ref:`select() <func-select>` like the - :ref:`poll() <func-poll>` function, but :ref:`select() <func-select>` cannot + The Linux kernel implements :c:func:`select()` like the + :c:func:`poll()` function, but :c:func:`select()` cannot return a ``POLLERR``. diff --git a/Documentation/userspace-api/media/v4l/func-write.rst b/Documentation/userspace-api/media/v4l/func-write.rst index fb1955f70f0f..49f5a0f4275f 100644 --- a/Documentation/userspace-api/media/v4l/func-write.rst +++ b/Documentation/userspace-api/media/v4l/func-write.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _func-write: @@ -18,7 +12,6 @@ Name v4l2-write - Write to a V4L2 device - Synopsis ======== @@ -26,15 +19,13 @@ Synopsis #include <unistd.h> - .. c:function:: ssize_t write( int fd, void *buf, size_t count ) - :name: v4l2-write Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``buf`` Buffer with data to be written @@ -45,10 +36,10 @@ Arguments Description =========== -:ref:`write() <func-write>` writes up to ``count`` bytes to the device +:c:func:`write()` writes up to ``count`` bytes to the device referenced by the file descriptor ``fd`` from the buffer starting at ``buf``. When the hardware outputs are not active yet, this function -enables them. When ``count`` is zero, :ref:`write() <func-write>` returns 0 +enables them. When ``count`` is zero, :c:func:`write()` returns 0 without any other effect. When the application does not provide more data in time, the previous @@ -56,7 +47,6 @@ video frame, raw VBI image, sliced VPS or WSS data is displayed again. Sliced Teletext or Closed Caption data is not repeated, the driver inserts a blank line instead. - Return Value ============ @@ -87,5 +77,5 @@ EIO I/O error. This indicates some hardware problem. EINVAL - The :ref:`write() <func-write>` function is not supported by this driver, + The :c:func:`write()` function is not supported by this driver, not on this device, or generally not on this type of device. diff --git a/Documentation/userspace-api/media/v4l/hist-v4l2.rst b/Documentation/userspace-api/media/v4l/hist-v4l2.rst index 6dcfe6046e33..28a2750d5c8c 100644 --- a/Documentation/userspace-api/media/v4l/hist-v4l2.rst +++ b/Documentation/userspace-api/media/v4l/hist-v4l2.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _hist-v4l2: @@ -21,18 +15,17 @@ not just an extension but a replacement for the V4L API. However it took another four years and two stable kernel releases until the new API was finally accepted for inclusion into the kernel in its present form. - Early Versions ============== 1998-08-20: First version. -1998-08-27: The :ref:`select() <func-select>` function was introduced. +1998-08-27: The :c:func:`select()` function was introduced. 1998-09-10: New video standard interface. 1998-09-18: The ``VIDIOC_NONCAP`` ioctl was replaced by the otherwise -meaningless ``O_TRUNC`` :ref:`open() <func-open>` flag, and the +meaningless ``O_TRUNC`` :c:func:`open()` flag, and the aliases ``O_NONCAP`` and ``O_NOIO`` were defined. Applications can set this flag if they intend to access controls only, as opposed to capture applications which need exclusive access. The ``VIDEO_STD_XXX`` @@ -52,7 +45,7 @@ renamed to :ref:`VIDIOC_ENUMSTD`, Codec API was released. 1998-11-08: Many minor changes. Most symbols have been renamed. Some -material changes to struct :c:type:`v4l2_capability`. +material changes to struct v4l2_capability. 1998-11-12: The read/write directon of some ioctls was misdefined. @@ -72,7 +65,6 @@ output devices were added. 1999-01-19: The ``VIDIOC_NEXTBUF`` ioctl was removed. - V4L2 Version 0.16 1999-01-31 ============================ @@ -80,7 +72,6 @@ V4L2 Version 0.16 1999-01-31 are gone. VIDIOC_QBUF takes a v4l2_buffer as a parameter. Added digital zoom (cropping) controls. - V4L2 Version 0.18 1999-03-16 ============================ @@ -88,7 +79,6 @@ Added a v4l to V4L2 ioctl compatibility layer to videodev.c. Driver writers, this changes how you implement your ioctl handler. See the Driver Writer's Guide. Added some more control id codes. - V4L2 Version 0.19 1999-06-05 ============================ @@ -114,7 +104,6 @@ malfunction of this ioctl. 1999-06-05: Changed the value of V4L2_CID_WHITENESS. - V4L2 Version 0.20 (1999-09-10) ============================== @@ -123,9 +112,8 @@ compatible* with 0.19 and earlier versions. Purpose of these changes was to simplify the API, while making it more extensible and following common Linux driver API conventions. -1. Some typos in ``V4L2_FMT_FLAG`` symbols were fixed. struct - :c:type:`v4l2_clip` was changed for compatibility with - v4l. (1999-08-30) +1. Some typos in ``V4L2_FMT_FLAG`` symbols were fixed. struct v4l2_clip + was changed for compatibility with v4l. (1999-08-30) 2. ``V4L2_TUNER_SUB_LANG1`` was added. (1999-09-05) @@ -136,14 +124,12 @@ common Linux driver API conventions. VIDIOC_STREAMON, VIDIOC_STREAMOFF, VIDIOC_S_FREQ, VIDIOC_S_INPUT, VIDIOC_S_OUTPUT, VIDIOC_S_EFFECT. For example - .. code-block:: c err = ioctl (fd, VIDIOC_XXX, V4L2_XXX); becomes - .. code-block:: c int a = V4L2_XXX; err = ioctl(fd, VIDIOC_XXX, &a); @@ -158,16 +144,14 @@ common Linux driver API conventions. This change obsoletes the following ioctls: ``VIDIOC_S_INFMT``, ``VIDIOC_G_INFMT``, ``VIDIOC_S_OUTFMT``, ``VIDIOC_G_OUTFMT``, ``VIDIOC_S_VBIFMT`` and ``VIDIOC_G_VBIFMT``. The image format - structure struct :c:type:`v4l2_format` was renamed to struct - :c:type:`v4l2_pix_format`, while struct - :c:type:`v4l2_format` is now the envelopping structure + struct v4l2_format was renamed to struct v4l2_pix_format, while + struct v4l2_format is now the envelopping structure for all format negotiations. 5. Similar to the changes above, the ``VIDIOC_G_PARM`` and ``VIDIOC_S_PARM`` ioctls were merged with ``VIDIOC_G_OUTPARM`` and - ``VIDIOC_S_OUTPARM``. A ``type`` field in the new struct - :c:type:`v4l2_streamparm` selects the respective - union member. + ``VIDIOC_S_OUTPARM``. A ``type`` field in the new struct v4l2_streamparm + selects the respective union member. This change obsoletes the ``VIDIOC_G_OUTPARM`` and ``VIDIOC_S_OUTPARM`` ioctls. @@ -185,7 +169,7 @@ common Linux driver API conventions. categories might have a greater separation, or may even appear in separate windows. -7. The struct :c:type:`v4l2_buffer` ``timestamp`` was +7. The struct v4l2_buffer ``timestamp`` was changed to a 64 bit integer, containing the sampling or output time of the frame in nanoseconds. Additionally timestamps will be in absolute system time, not starting from zero at the beginning of a @@ -208,16 +192,14 @@ common Linux driver API conventions. v4l2_masterclock_gettime() function (used only by drivers) to return a 64-bit integer. -8. A ``sequence`` field was added to struct - :c:type:`v4l2_buffer`. The ``sequence`` field counts - captured frames, it is ignored by output devices. When a capture - driver drops a frame, the sequence number of that frame is skipped. - +8. A ``sequence`` field was added to struct v4l2_buffer. The ``sequence`` + field counts captured frames, it is ignored by output devices. When a + capture driver drops a frame, the sequence number of that frame is skipped. V4L2 Version 0.20 incremental changes ===================================== -1999-12-23: In struct :c:type:`v4l2_vbi_format` the +1999-12-23: In struct v4l2_vbi_format the ``reserved1`` field became ``offset``. Previously drivers were required to clear the ``reserved1`` field. @@ -262,10 +244,9 @@ multiple tuners into account.) compatibility* as the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctls may fail now if the struct ``v4l2_fmt`` ``type`` field does not contain -``V4L2_BUF_TYPE_VBI``. In the documentation of the struct -:c:type:`v4l2_vbi_format` ``offset`` field the -ambiguous phrase "rising edge" was changed to "leading edge". - +``V4L2_BUF_TYPE_VBI``. In the documentation of the struct v4l2_vbi_format`, +the ``offset`` field the ambiguous phrase "rising edge" was changed to +"leading edge". V4L2 Version 0.20 2000-11-23 ============================ @@ -302,13 +283,11 @@ A number of changes were made to the raw VBI interface. were added. The former is an alias for the old ``V4L2_TYPE_VBI``, the latter was missing in the ``videodev.h`` file. - V4L2 Version 0.20 2002-07-25 ============================ Added sliced VBI interface proposal. - V4L2 in Linux 2.5.46, 2002-10 ============================= @@ -319,7 +298,7 @@ This unnamed version was finally merged into Linux 2.5.46. 1. As specified in :ref:`related`, drivers must make related device functions available under all minor device numbers. -2. The :ref:`open() <func-open>` function requires access mode +2. The :c:func:`open()` function requires access mode ``O_RDWR`` regardless of the device type. All V4L2 drivers exchanging data with applications must support the ``O_NONBLOCK`` flag. The ``O_NOIO`` flag, a V4L2 symbol which aliased the @@ -328,7 +307,7 @@ This unnamed version was finally merged into Linux 2.5.46. until the application attempts to initiate a data exchange, see :ref:`open`. -3. The struct :c:type:`v4l2_capability` changed +3. The struct v4l2_capability changed dramatically. Note that also the size of the structure changed, which is encoded in the ioctl request code, thus older V4L2 devices will respond with an ``EINVAL`` error code to the new @@ -361,7 +340,7 @@ This unnamed version was finally merged into Linux 2.5.46. ``V4L2_FLAG_MONOCHROME`` flag was removed, this information is available as described in :ref:`format`. -4. In struct :c:type:`v4l2_input` the ``assoc_audio`` +4. In struct v4l2_input the ``assoc_audio`` field and the ``capability`` field and its only flag ``V4L2_INPUT_CAP_AUDIO`` was replaced by the new ``audioset`` field. Instead of linking one video input to one audio input this field @@ -370,11 +349,11 @@ This unnamed version was finally merged into Linux 2.5.46. New fields are ``tuner`` (reversing the former link from tuners to video inputs), ``std`` and ``status``. - Accordingly struct :c:type:`v4l2_output` lost its + Accordingly struct v4l2_output lost its ``capability`` and ``assoc_audio`` fields. ``audioset``, ``modulator`` and ``std`` where added instead. -5. The struct :c:type:`v4l2_audio` field ``audio`` was +5. The struct v4l2_audio field ``audio`` was renamed to ``index``, for consistency with other structures. A new capability flag ``V4L2_AUDCAP_STEREO`` was added to indicated if the audio input in question supports stereo sound. @@ -382,21 +361,20 @@ This unnamed version was finally merged into Linux 2.5.46. where removed. This can be easily implemented using controls. (However the same applies to AVL which is still there.) - Again for consistency the struct - :c:type:`v4l2_audioout` field ``audio`` was renamed + Again for consistency the struct v4l2_audioout field ``audio`` was renamed to ``index``. -6. The struct :c:type:`v4l2_tuner` ``input`` field was +6. The struct v4l2_tuner ``input`` field was replaced by an ``index`` field, permitting devices with multiple tuners. The link between video inputs and tuners is now reversed, inputs point to their tuner. The ``std`` substructure became a - simple set (more about this below) and moved into struct - :c:type:`v4l2_input`. A ``type`` field was added. + simple set (more about this below) and moved into struct v4l2_input. + A ``type`` field was added. - Accordingly in struct :c:type:`v4l2_modulator` the + Accordingly in struct v4l2_modulator the ``output`` was replaced by an ``index`` field. - In struct :c:type:`v4l2_frequency` the ``port`` + In struct v4l2_frequency the ``port`` field was replaced by a ``tuner`` field containing the respective tuner or modulator index number. A tuner ``type`` field was added and the ``reserved`` field became larger for future extensions @@ -412,7 +390,7 @@ This unnamed version was finally merged into Linux 2.5.46. :ref:`VIDIOC_S_STD <VIDIOC_G_STD>` now take a pointer to this type as argument. :ref:`VIDIOC_QUERYSTD` was added to autodetect the received standard, if the hardware has this - capability. In struct :c:type:`v4l2_standard` an + capability. In struct v4l2_standard an ``index`` field was added for :ref:`VIDIOC_ENUMSTD`. A :ref:`v4l2_std_id <v4l2-std-id>` field named ``id`` was added as @@ -424,10 +402,10 @@ This unnamed version was finally merged into Linux 2.5.46. Struct ``v4l2_enumstd`` ceased to be. :ref:`VIDIOC_ENUMSTD` now takes a pointer to a - struct :c:type:`v4l2_standard` directly. The + struct v4l2_standard directly. The information which standards are supported by a particular video - input or output moved into struct :c:type:`v4l2_input` - and struct :c:type:`v4l2_output` fields named ``std``, + input or output moved into struct v4l2_input + and struct v4l2_output fields named ``std``, respectively. 8. The struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` fields @@ -439,15 +417,13 @@ This unnamed version was finally merged into Linux 2.5.46. :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`, but without the overhead of programming the hardware and regardless of I/O in progress. - In struct :c:type:`v4l2_format` the ``fmt`` union was - extended to contain struct :c:type:`v4l2_window`. All + In struct v4l2_format the ``fmt`` union was + extended to contain struct v4l2_window. All image format negotiations are now possible with ``VIDIOC_G_FMT``, ``VIDIOC_S_FMT`` and ``VIDIOC_TRY_FMT``; ioctl. The ``VIDIOC_G_WIN`` and ``VIDIOC_S_WIN`` ioctls to prepare for a video overlay were - removed. The ``type`` field changed to type enum - :c:type:`v4l2_buf_type` and the buffer type names - changed as follows. - + removed. The ``type`` field changed to type enum v4l2_buf_type and + the buffer type names changed as follows. .. flat-table:: @@ -455,7 +431,7 @@ This unnamed version was finally merged into Linux 2.5.46. :stub-columns: 0 * - Old defines - - enum :c:type:`v4l2_buf_type` + - enum v4l2_buf_type * - ``V4L2_BUF_TYPE_CAPTURE`` - ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` * - ``V4L2_BUF_TYPE_CODECIN`` @@ -483,16 +459,12 @@ This unnamed version was finally merged into Linux 2.5.46. * - ``V4L2_BUF_TYPE_PRIVATE_BASE`` - ``V4L2_BUF_TYPE_PRIVATE`` (but this is deprecated) +10. In struct v4l2_fmtdesc a enum v4l2_buf_type field named ``type`` was + added as in struct v4l2_format. The ``VIDIOC_ENUM_FBUFFMT`` ioctl is no + longer needed and was removed. These calls can be replaced by + :ref:`VIDIOC_ENUM_FMT` with type ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. -10. In struct :c:type:`v4l2_fmtdesc` a enum - :c:type:`v4l2_buf_type` field named ``type`` was - added as in struct :c:type:`v4l2_format`. The - ``VIDIOC_ENUM_FBUFFMT`` ioctl is no longer needed and was removed. - These calls can be replaced by - :ref:`VIDIOC_ENUM_FMT` with type - ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. - -11. In struct :c:type:`v4l2_pix_format` the ``depth`` +11. In struct v4l2_pix_format the ``depth`` field was removed, assuming applications which recognize the format by its four-character-code already know the color depth, and others do not care about it. The same rationale lead to the removal of the @@ -505,18 +477,15 @@ This unnamed version was finally merged into Linux 2.5.46. Since the remaining flags were replaced as well, the ``flags`` field itself was removed. - The interlace flags were replaced by a enum - :c:type:`v4l2_field` value in a newly added ``field`` - field. - - + The interlace flags were replaced by a enum v4l2_field value in a + newly added ``field`` field. .. flat-table:: :header-rows: 1 :stub-columns: 0 * - Old flag - - enum :c:type:`v4l2_field` + - enum v4l2_field * - ``V4L2_FMT_FLAG_NOT_INTERLACED`` - ? * - ``V4L2_FMT_FLAG_INTERLACED`` = ``V4L2_FMT_FLAG_COMBINED`` @@ -532,33 +501,31 @@ This unnamed version was finally merged into Linux 2.5.46. * - ``-`` - ``V4L2_FIELD_ALTERNATE`` - - The color space flags were replaced by a enum - :c:type:`v4l2_colorspace` value in a newly added - ``colorspace`` field, where one of ``V4L2_COLORSPACE_SMPTE170M``, - ``V4L2_COLORSPACE_BT878``, ``V4L2_COLORSPACE_470_SYSTEM_M`` or + The color space flags were replaced by a enum v4l2_colorspace value in + a newly added ``colorspace`` field, where one of + ``V4L2_COLORSPACE_SMPTE170M``, ``V4L2_COLORSPACE_BT878``, + ``V4L2_COLORSPACE_470_SYSTEM_M`` or ``V4L2_COLORSPACE_470_SYSTEM_BG`` replaces ``V4L2_FMT_CS_601YUV``. -12. In struct :c:type:`v4l2_requestbuffers` the - ``type`` field was properly defined as enum - :c:type:`v4l2_buf_type`. Buffer types changed as - mentioned above. A new ``memory`` field of type enum - :c:type:`v4l2_memory` was added to distinguish between +12. In struct v4l2_requestbuffers the + ``type`` field was properly defined as enum v4l2_buf_type. Buffer types + changed as mentioned above. A new ``memory`` field of type + enum v4l2_memory was added to distinguish between I/O methods using buffers allocated by the driver or the application. See :ref:`io` for details. -13. In struct :c:type:`v4l2_buffer` the ``type`` field was - properly defined as enum :c:type:`v4l2_buf_type`. +13. In struct v4l2_buffer the ``type`` field was + properly defined as enum v4l2_buf_type. Buffer types changed as mentioned above. A ``field`` field of type - enum :c:type:`v4l2_field` was added to indicate if a + enum v4l2_field was added to indicate if a buffer contains a top or bottom field. The old field flags were removed. Since no unadjusted system time clock was added to the kernel as planned, the ``timestamp`` field changed back from type stamp_t, an unsigned 64 bit integer expressing the sample time in - nanoseconds, to struct :c:type:`timeval`. With the addition + nanoseconds, to struct timeval. With the addition of a second memory mapping method the ``offset`` field moved into - union ``m``, and a new ``memory`` field of type enum - :c:type:`v4l2_memory` was added to distinguish between + union ``m``, and a new ``memory`` field of type enum v4l2_memory + was added to distinguish between I/O methods. See :ref:`io` for details. The ``V4L2_BUF_REQ_CONTIG`` flag was used by the V4L compatibility @@ -567,7 +534,7 @@ This unnamed version was finally merged into Linux 2.5.46. indeed allocated in device memory rather than DMA-able system memory. It was barely useful and so was removed. -14. In struct :c:type:`v4l2_framebuffer` the +14. In struct v4l2_framebuffer the ``base[3]`` array anticipating double- and triple-buffering in off-screen video memory, however without defining a synchronization mechanism, was replaced by a single pointer. The @@ -578,40 +545,38 @@ This unnamed version was finally merged into Linux 2.5.46. ``V4L2_FBUF_CAP_LIST_CLIPPING`` and ``V4L2_FBUF_CAP_BITMAP_CLIPPING``. -15. In struct :c:type:`v4l2_clip` the ``x``, ``y``, +15. In struct v4l2_clip the ``x``, ``y``, ``width`` and ``height`` field moved into a ``c`` substructure of - type struct :c:type:`v4l2_rect`. The ``x`` and ``y`` + type struct v4l2_rect. The ``x`` and ``y`` fields were renamed to ``left`` and ``top``, i. e. offsets to a context dependent origin. -16. In struct :c:type:`v4l2_window` the ``x``, ``y``, +16. In struct v4l2_window the ``x``, ``y``, ``width`` and ``height`` field moved into a ``w`` substructure as - above. A ``field`` field of type :c:type:`v4l2_field` was added to + above. A ``field`` field of type enum v4l2_field was added to distinguish between field and frame (interlaced) overlay. -17. The digital zoom interface, including struct - struct ``v4l2_zoomcap``, struct +17. The digital zoom interface, including struct ``v4l2_zoomcap``, struct ``v4l2_zoom``, ``V4L2_ZOOM_NONCAP`` and ``V4L2_ZOOM_WHILESTREAMING`` was replaced by a new cropping and - scaling interface. The previously unused struct - struct :c:type:`v4l2_cropcap` and struct :c:type:`v4l2_crop` + scaling interface. The previously unused + struct v4l2_cropcap and struct v4l2_crop where redefined for this purpose. See :ref:`crop` for details. -18. In struct :c:type:`v4l2_vbi_format` the +18. In struct v4l2_vbi_format the ``SAMPLE_FORMAT`` field now contains a four-character-code as used to identify video image formats and ``V4L2_PIX_FMT_GREY`` replaces the ``V4L2_VBI_SF_UBYTE`` define. The ``reserved`` field was extended. -19. In struct :c:type:`v4l2_captureparm` the type of - the ``timeperframe`` field changed from unsigned long to struct - :c:type:`v4l2_fract`. This allows the accurate +19. In struct v4l2_captureparm the type of + the ``timeperframe`` field changed from unsigned long to + struct v4l2_fract. This allows the accurate expression of multiples of the NTSC-M frame rate 30000 / 1001. A new field ``readbuffers`` was added to control the driver behaviour in read I/O mode. - Similar changes were made to struct - :c:type:`v4l2_outputparm`. + Similar changes were made to struct v4l2_outputparm. 20. The struct ``v4l2_performance`` and ``VIDIOC_G_PERF`` ioctl were dropped. Except when using the @@ -622,7 +587,6 @@ This unnamed version was finally merged into Linux 2.5.46. V4L2 documentation was inaccurate, this has been corrected in :ref:`pixfmt`. - V4L2 2003-06-19 =============== @@ -673,7 +637,6 @@ V4L2 2003-06-19 Kernel 2.6.39. Drivers and applications assuming a constant parameter need an update. - V4L2 2003-11-05 =============== @@ -682,7 +645,6 @@ V4L2 2003-11-05 refer to bytes in memory, in ascending address order. - .. flat-table:: :header-rows: 1 :stub-columns: 0 @@ -703,7 +665,6 @@ V4L2 2003-11-05 - R, G, B, X - B, G, R, X - The ``V4L2_PIX_FMT_BGR24`` example was always correct. In :ref:`v4l-image-properties` the mapping of the V4L @@ -714,7 +675,6 @@ V4L2 2003-11-05 RGB pixel formats differently. These issues have yet to be addressed, for details see :ref:`pixfmt-rgb`. - V4L2 in Linux 2.6.6, 2004-05-09 =============================== @@ -723,18 +683,16 @@ V4L2 in Linux 2.6.6, 2004-05-09 ioctl, while the read-only version was renamed to ``VIDIOC_CROPCAP_OLD``. The old ioctl was removed on Kernel 2.6.39. - V4L2 in Linux 2.6.8 =================== 1. A new field ``input`` (former ``reserved[0]``) was added to the - struct :c:type:`v4l2_buffer` structure. Purpose of this + struct v4l2_buffer. Purpose of this field is to alternate between video inputs (e. g. cameras) in step with the video capturing process. This function must be enabled with the new ``V4L2_BUF_FLAG_INPUT`` flag. The ``flags`` field is no longer read-only. - V4L2 spec erratum 2004-08-01 ============================ @@ -748,11 +706,10 @@ V4L2 spec erratum 2004-08-01 4. The documentation of the :ref:`VIDIOC_QBUF` and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctls did not mention the - struct :c:type:`v4l2_buffer` ``memory`` field. It was + struct v4l2_buffer ``memory`` field. It was also missing from examples. Also on the ``VIDIOC_DQBUF`` page the ``EIO`` error code was not documented. - V4L2 in Linux 2.6.14 ==================== @@ -760,7 +717,6 @@ V4L2 in Linux 2.6.14 :ref:`sliced` and replaces the interface first proposed in V4L2 specification 0.8. - V4L2 in Linux 2.6.15 ==================== @@ -780,7 +736,6 @@ V4L2 in Linux 2.6.15 ``VIDIOC_G_MPEGCOMP`` and ``VIDIOC_S_MPEGCOMP`` ioctls where removed in Linux 2.6.25.) - V4L2 spec erratum 2005-11-27 ============================ @@ -790,37 +745,31 @@ cropping is supported. In the video standard selection example in :ref:`standard` the :ref:`VIDIOC_S_STD <VIDIOC_G_STD>` call used the wrong argument type. - V4L2 spec erratum 2006-01-10 ============================ -1. The ``V4L2_IN_ST_COLOR_KILL`` flag in struct - :c:type:`v4l2_input` not only indicates if the color - killer is enabled, but also if it is active. (The color killer - disables color decoding when it detects no color in the video signal - to improve the image quality.) +1. The ``V4L2_IN_ST_COLOR_KILL`` flag in struct v4l2_input not only + indicates if the color killer is enabled, but also if it is active. + (The color killer disables color decoding when it detects no color + in the video signal to improve the image quality.) 2. :ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` is a write-read ioctl, not write-only as stated on its reference page. The ioctl changed in 2003 as noted above. - V4L2 spec erratum 2006-02-03 ============================ -1. In struct :c:type:`v4l2_captureparm` and struct - :c:type:`v4l2_outputparm` the ``timeperframe`` +1. In struct v4l2_captureparm and struct v4l2_outputparm the ``timeperframe`` field gives the time in seconds, not microseconds. - V4L2 spec erratum 2006-02-04 ============================ -1. The ``clips`` field in struct :c:type:`v4l2_window` - must point to an array of struct :c:type:`v4l2_clip`, not - a linked list, because drivers ignore the struct - struct :c:type:`v4l2_clip`. ``next`` pointer. - +1. The ``clips`` field in struct v4l2_window + must point to an array of struct v4l2_clip, not + a linked list, because drivers ignore the + struct v4l2_clip. ``next`` pointer. V4L2 in Linux 2.6.17 ==================== @@ -836,7 +785,6 @@ V4L2 in Linux 2.6.17 ``V4L2_TUNER_MODE_STEREO`` for this purpose is deprecated now. See the :ref:`VIDIOC_G_TUNER <VIDIOC_G_TUNER>` section for details. - V4L2 spec erratum 2006-09-23 (Draft 0.15) ========================================= @@ -844,19 +792,18 @@ V4L2 spec erratum 2006-09-23 (Draft 0.15) ``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT`` of the sliced VBI interface were not mentioned along with other buffer types. -2. In :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` it was clarified that the struct - :c:type:`v4l2_audio` ``mode`` field is a flags field. +2. In :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` it was clarified that the + struct v4l2_audio ``mode`` field is a flags field. 3. :ref:`VIDIOC_QUERYCAP` did not mention the sliced VBI and radio capability flags. -4. In :ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` it was clarified that applications - must initialize the tuner ``type`` field of struct - :c:type:`v4l2_frequency` before calling +4. In :ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` it was clarified that + applications must initialize the tuner ``type`` field of + struct v4l2_frequency before calling :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>`. -5. The ``reserved`` array in struct - :c:type:`v4l2_requestbuffers` has 2 elements, +5. The ``reserved`` array in struct v4l2_requestbuffers has 2 elements, not 32. 6. In :ref:`output` and :ref:`raw-vbi` the device file names @@ -866,7 +813,6 @@ V4L2 spec erratum 2006-09-23 (Draft 0.15) extended from 224-239 to 224-255. Accordingly device file names ``/dev/vbi0`` to ``/dev/vbi31`` are possible now. - V4L2 in Linux 2.6.18 ==================== @@ -876,16 +822,15 @@ V4L2 in Linux 2.6.18 flag to skip unsupported controls with :ref:`VIDIOC_QUERYCTRL`, new control types ``V4L2_CTRL_TYPE_INTEGER64`` and ``V4L2_CTRL_TYPE_CTRL_CLASS`` - (:c:type:`v4l2_ctrl_type`), and new control flags + (enum v4l2_ctrl_type), and new control flags ``V4L2_CTRL_FLAG_READ_ONLY``, ``V4L2_CTRL_FLAG_UPDATE``, ``V4L2_CTRL_FLAG_INACTIVE`` and ``V4L2_CTRL_FLAG_SLIDER`` (:ref:`control-flags`). See :ref:`extended-controls` for details. - V4L2 in Linux 2.6.19 ==================== -1. In struct :c:type:`v4l2_sliced_vbi_cap` a +1. In struct v4l2_sliced_vbi_cap a buffer type field was added replacing a reserved field. Note on architectures where the size of enum types differs from int types the size of the structure changed. The @@ -903,14 +848,12 @@ V4L2 in Linux 2.6.19 3. A new pixel format ``V4L2_PIX_FMT_RGB444`` (:ref:`pixfmt-rgb`) was added. - V4L2 spec erratum 2006-10-12 (Draft 0.17) ========================================= 1. ``V4L2_PIX_FMT_HM12`` (:ref:`reserved-formats`) is a YUV 4:2:0, not 4:2:2 format. - V4L2 in Linux 2.6.21 ==================== @@ -918,12 +861,11 @@ V4L2 in Linux 2.6.21 General Public License version two or later, and under a 3-clause BSD-style license. - V4L2 in Linux 2.6.22 ==================== 1. Two new field orders ``V4L2_FIELD_INTERLACED_TB`` and - ``V4L2_FIELD_INTERLACED_BT`` were added. See :c:type:`v4l2_field` for + ``V4L2_FIELD_INTERLACED_BT`` were added. See enum v4l2_field for details. 2. Three new clipping/blending methods with a global or straight or @@ -931,20 +873,17 @@ V4L2 in Linux 2.6.22 See the description of the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` and :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctls for details. - A new ``global_alpha`` field was added to - :c:type:`v4l2_window`, extending the structure. This - may *break compatibility* with applications using a struct - struct :c:type:`v4l2_window` directly. However the + A new ``global_alpha`` field was added to struct v4l2_window, + extending the structure. This may **break compatibility** with + applications using a struct v4l2_window directly. However the :ref:`VIDIOC_G/S/TRY_FMT <VIDIOC_G_FMT>` ioctls, which take a - pointer to a :c:type:`v4l2_format` parent structure + pointer to a struct v4l2_format parent structure with padding bytes at the end, are not affected. -3. The format of the ``chromakey`` field in struct - :c:type:`v4l2_window` changed from "host order RGB32" - to a pixel value in the same format as the framebuffer. This may - *break compatibility* with existing applications. Drivers supporting - the "host order RGB32" format are not known. - +3. The format of the ``chromakey`` field in struct v4l2_window changed from + "host order RGB32" to a pixel value in the same format as the framebuffer. + This may **break compatibility** with existing applications. Drivers + supporting the "host order RGB32" format are not known. V4L2 in Linux 2.6.24 ==================== @@ -953,7 +892,6 @@ V4L2 in Linux 2.6.24 ``V4L2_PIX_FMT_YUV555``, ``V4L2_PIX_FMT_YUV565`` and ``V4L2_PIX_FMT_YUV32`` were added. - V4L2 in Linux 2.6.25 ==================== @@ -980,7 +918,6 @@ V4L2 in Linux 2.6.25 interface in Linux 2.6.18, where finally removed from the ``videodev2.h`` header file. - V4L2 in Linux 2.6.26 ==================== @@ -990,7 +927,6 @@ V4L2 in Linux 2.6.26 2. Added user controls ``V4L2_CID_CHROMA_AGC`` and ``V4L2_CID_COLOR_KILLER``. - V4L2 in Linux 2.6.27 ==================== @@ -1002,7 +938,6 @@ V4L2 in Linux 2.6.27 ``V4L2_PIX_FMT_PCA561``, ``V4L2_PIX_FMT_SGBRG8``, ``V4L2_PIX_FMT_PAC207`` and ``V4L2_PIX_FMT_PJPG`` were added. - V4L2 in Linux 2.6.28 ==================== @@ -1014,14 +949,12 @@ V4L2 in Linux 2.6.28 3. The pixel formats ``V4L2_PIX_FMT_SGRBG10`` and ``V4L2_PIX_FMT_SGRBG10DPCM8`` were added. - V4L2 in Linux 2.6.29 ==================== 1. The ``VIDIOC_G_CHIP_IDENT`` ioctl was renamed to ``VIDIOC_G_CHIP_IDENT_OLD`` and ``VIDIOC_DBG_G_CHIP_IDENT`` was - introduced in its place. The old struct - struct ``v4l2_chip_ident`` was renamed to + introduced in its place. The old struct ``v4l2_chip_ident`` was renamed to struct ``v4l2_chip_ident_old``. 2. The pixel formats ``V4L2_PIX_FMT_VYUY``, ``V4L2_PIX_FMT_NV16`` and @@ -1031,7 +964,6 @@ V4L2 in Linux 2.6.29 ``V4L2_CID_ZOOM_RELATIVE``, ``V4L2_CID_ZOOM_CONTINUOUS`` and ``V4L2_CID_PRIVACY``. - V4L2 in Linux 2.6.30 ==================== @@ -1039,7 +971,6 @@ V4L2 in Linux 2.6.30 2. New control ``V4L2_CID_COLORFX`` was added. - V4L2 in Linux 2.6.32 ==================== @@ -1066,21 +997,18 @@ V4L2 in Linux 2.6.32 9. Added Remote Controller chapter, describing the default Remote Controller mapping for media devices. - V4L2 in Linux 2.6.33 ==================== 1. Added support for Digital Video timings in order to support HDTV receivers and transmitters. - V4L2 in Linux 2.6.34 ==================== 1. Added ``V4L2_CID_IRIS_ABSOLUTE`` and ``V4L2_CID_IRIS_RELATIVE`` controls to the :ref:`Camera controls class <camera-controls>`. - V4L2 in Linux 2.6.37 ==================== @@ -1089,7 +1017,6 @@ V4L2 in Linux 2.6.37 applications found that used it. It was originally scheduled for removal in 2.6.35. - V4L2 in Linux 2.6.39 ==================== @@ -1099,7 +1026,6 @@ V4L2 in Linux 2.6.39 drivers and applications. See :ref:`multi-planar API <planar-apis>` for details. - V4L2 in Linux 3.1 ================= @@ -1110,7 +1036,6 @@ V4L2 in Linux 3.1 Added V4L2_CTRL_TYPE_BITMASK. - V4L2 in Linux 3.2 ================= @@ -1121,7 +1046,6 @@ V4L2 in Linux 3.2 Does not affect the compatibility of current drivers and applications. See :ref:`selection API <selection-api>` for details. - V4L2 in Linux 3.3 ================= @@ -1131,7 +1055,6 @@ V4L2 in Linux 3.3 2. Added the device_caps field to struct v4l2_capabilities and added the new V4L2_CAP_DEVICE_CAPS capability. - V4L2 in Linux 3.4 ================= @@ -1142,7 +1065,6 @@ V4L2 in Linux 3.4 :ref:`VIDIOC_QUERY_DV_TIMINGS` and :ref:`VIDIOC_DV_TIMINGS_CAP`. - V4L2 in Linux 3.5 ================= @@ -1169,11 +1091,10 @@ V4L2 in Linux 3.5 ``V4L2_CID_AUTO_FOCUS_START``, ``V4L2_CID_AUTO_FOCUS_STOP``, ``V4L2_CID_AUTO_FOCUS_STATUS`` and ``V4L2_CID_AUTO_FOCUS_RANGE``. - V4L2 in Linux 3.6 ================= -1. Replaced ``input`` in struct :c:type:`v4l2_buffer` by +1. Replaced ``input`` in struct v4l2_buffer by ``reserved2`` and removed ``V4L2_BUF_FLAG_INPUT``. 2. Added V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE @@ -1182,17 +1103,15 @@ V4L2 in Linux 3.6 3. Added support for frequency band enumerations: :ref:`VIDIOC_ENUM_FREQ_BANDS`. - V4L2 in Linux 3.9 ================= 1. Added timestamp types to ``flags`` field in - struct :c:type:`v4l2_buffer`. See :ref:`buffer-flags`. + struct v4l2_buffer. See :ref:`buffer-flags`. 2. Added ``V4L2_EVENT_CTRL_CH_RANGE`` control event changes flag. See :ref:`ctrl-changes-flags`. - V4L2 in Linux 3.10 ================== @@ -1204,59 +1123,48 @@ V4L2 in Linux 3.10 2. Added new debugging ioctl :ref:`VIDIOC_DBG_G_CHIP_INFO`. - V4L2 in Linux 3.11 ================== 1. Remove obsolete ``VIDIOC_DBG_G_CHIP_IDENT`` ioctl. - V4L2 in Linux 3.14 ================== -1. In struct :c:type:`v4l2_rect`, the type of ``width`` and +1. In struct v4l2_rect, the type of ``width`` and ``height`` fields changed from _s32 to _u32. - V4L2 in Linux 3.15 ================== 1. Added Software Defined Radio (SDR) Interface. - V4L2 in Linux 3.16 ================== 1. Added event V4L2_EVENT_SOURCE_CHANGE. - V4L2 in Linux 3.17 ================== -1. Extended struct :c:type:`v4l2_pix_format`. Added +1. Extended struct v4l2_pix_format. Added format flags. 2. Added compound control types and :ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>`. - V4L2 in Linux 3.18 ================== 1. Added ``V4L2_CID_PAN_SPEED`` and ``V4L2_CID_TILT_SPEED`` camera controls. - V4L2 in Linux 3.19 ================== -1. Rewrote Colorspace chapter, added new enum - :c:type:`v4l2_ycbcr_encoding` and enum - :c:type:`v4l2_quantization` fields to struct - :c:type:`v4l2_pix_format`, struct - :c:type:`v4l2_pix_format_mplane` and - struct :c:type:`v4l2_mbus_framefmt`. - +1. Rewrote Colorspace chapter, added new enum v4l2_ycbcr_encoding + and enum v4l2_quantization fields to struct v4l2_pix_format, + struct v4l2_pix_format_mplane and struct v4l2_mbus_framefmt. V4L2 in Linux 4.4 ================= @@ -1268,13 +1176,11 @@ V4L2 in Linux 4.4 3. Added transmitter support for Software Defined Radio (SDR) Interface. - .. _other: Relation of V4L2 to other Linux multimedia APIs =============================================== - .. _xvideo: X Video Extension @@ -1320,7 +1226,6 @@ YUV to RGB conversion and scaling for faster video playback, and added an interface to MPEG-2 decoding hardware. This API is useful to display images captured with V4L2 devices. - Digital Video ------------- @@ -1330,13 +1235,11 @@ homepage at `https://linuxtv.org <https://linuxtv.org>`__. The Linux DVB API has no connection to the V4L2 API except that drivers for hybrid hardware may support both. - Audio Interfaces ---------------- [to do - OSS/ALSA] - .. _experimental: Experimental API Elements @@ -1350,7 +1253,6 @@ change in the future. - :ref:`VIDIOC_DBG_G_CHIP_INFO` ioctl. - .. _obsolete: Obsolete API Elements diff --git a/Documentation/userspace-api/media/v4l/hsv-formats.rst b/Documentation/userspace-api/media/v4l/hsv-formats.rst index 4906f7e0d80d..d810c914b673 100644 --- a/Documentation/userspace-api/media/v4l/hsv-formats.rst +++ b/Documentation/userspace-api/media/v4l/hsv-formats.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _hsv-formats: diff --git a/Documentation/userspace-api/media/v4l/io.rst b/Documentation/userspace-api/media/v4l/io.rst index de0e2f529268..ce0cece6f35f 100644 --- a/Documentation/userspace-api/media/v4l/io.rst +++ b/Documentation/userspace-api/media/v4l/io.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _io: @@ -16,8 +10,8 @@ The V4L2 API defines several different methods to read from or write to a device. All drivers exchanging data with applications must support at least one of them. -The classic I/O method using the :ref:`read() <func-read>` and -:ref:`write() <func-write>` function is automatically selected after opening a +The classic I/O method using the :c:func:`read()` and +:c:func:`write()` function is automatically selected after opening a V4L2 device. When the driver does not support this method attempts to read or write will fail at any time. @@ -45,7 +39,6 @@ closing and reopening the device. The following sections describe the various I/O methods in more detail. - .. toctree:: :maxdepth: 1 diff --git a/Documentation/userspace-api/media/v4l/libv4l-introduction.rst b/Documentation/userspace-api/media/v4l/libv4l-introduction.rst index 95f3127b4749..05690f2358ce 100644 --- a/Documentation/userspace-api/media/v4l/libv4l-introduction.rst +++ b/Documentation/userspace-api/media/v4l/libv4l-introduction.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _libv4l-introduction: @@ -24,7 +18,6 @@ An example of using libv4l is provided by libv4l consists of 3 different libraries: - libv4lconvert ============= @@ -72,7 +65,6 @@ libv4lconvert/processing. These controls are stored application wide libv4lconvert/processing offers the actual video processing functionality. - libv4l1 ======= @@ -85,7 +77,6 @@ just pass calls through. Since those functions are emulations of the old V4L1 API, it shouldn't be used for new applications. - libv4l2 ======= @@ -112,7 +103,6 @@ available in the driver. :ref:`VIDIOC_ENUM_FMT <VIDIOC_ENUM_FMT>` keeps enumerating the hardware supported formats, plus the emulated formats offered by libv4l at the end. - .. _libv4l-ops: Libv4l device control functions @@ -122,17 +112,17 @@ The common file operation methods are provided by libv4l. Those functions operate just like the gcc function ``dup()`` and V4L2 functions -:c:func:`open() <v4l2-open>`, :c:func:`close() <v4l2-close>`, -:c:func:`ioctl() <v4l2-ioctl>`, :c:func:`read() <v4l2-read>`, -:c:func:`mmap() <v4l2-mmap>` and :c:func:`munmap() <v4l2-munmap>`: +:c:func:`open()`, :c:func:`close()`, +:c:func:`ioctl()`, :c:func:`read()`, +:c:func:`mmap()` and :c:func:`munmap()`: .. c:function:: int v4l2_open(const char *file, int oflag, ...) - operates like the :c:func:`open() <v4l2-open>` function. + operates like the :c:func:`open()` function. .. c:function:: int v4l2_close(int fd) - operates like the :c:func:`close() <v4l2-close>` function. + operates like the :c:func:`close()` function. .. c:function:: int v4l2_dup(int fd) @@ -140,19 +130,19 @@ V4L2 functions .. c:function:: int v4l2_ioctl (int fd, unsigned long int request, ...) - operates like the :c:func:`ioctl() <v4l2-ioctl>` function. + operates like the :c:func:`ioctl()` function. .. c:function:: int v4l2_read (int fd, void* buffer, size_t n) - operates like the :c:func:`read() <v4l2-read>` function. + operates like the :c:func:`read()` function. .. c:function:: void v4l2_mmap(void *start, size_t length, int prot, int flags, int fd, int64_t offset); - operates like the :c:func:`munmap() <v4l2-munmap>` function. + operates like the :c:func:`munmap()` function. .. c:function:: int v4l2_munmap(void *_start, size_t length); - operates like the :c:func:`munmap() <v4l2-munmap>` function. + operates like the :c:func:`munmap()` function. Those functions provide additional control: @@ -175,14 +165,13 @@ Those functions provide additional control: of the given v4l control id. when the cid does not exist, could not be accessed for some reason, or some error occurred 0 is returned. - v4l1compat.so wrapper library ============================= This library intercepts calls to -:c:func:`open() <v4l2-open>`, :c:func:`close() <v4l2-close>`, -:c:func:`ioctl() <v4l2-ioctl>`, :c:func:`mmap() <v4l2-mmap>` and -:c:func:`munmap() <v4l2-munmap>` +:c:func:`open()`, :c:func:`close()`, +:c:func:`ioctl()`, :c:func:`mmap()` and +:c:func:`munmap()` operations and redirects them to the libv4l counterparts, by using ``LD_PRELOAD=/usr/lib/v4l1compat.so``. It also emulates V4L1 calls via V4L2 API. diff --git a/Documentation/userspace-api/media/v4l/libv4l.rst b/Documentation/userspace-api/media/v4l/libv4l.rst index 5ea2016cac65..f446dd2d01ac 100644 --- a/Documentation/userspace-api/media/v4l/libv4l.rst +++ b/Documentation/userspace-api/media/v4l/libv4l.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _libv4l: diff --git a/Documentation/userspace-api/media/v4l/meta-formats.rst b/Documentation/userspace-api/media/v4l/meta-formats.rst index 7dcc4bacbb0c..fff25357fe86 100644 --- a/Documentation/userspace-api/media/v4l/meta-formats.rst +++ b/Documentation/userspace-api/media/v4l/meta-formats.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _meta-formats: @@ -21,6 +14,7 @@ These formats are used for the :ref:`metadata` interface only. pixfmt-meta-d4xx pixfmt-meta-intel-ipu3 + pixfmt-meta-rkisp1 pixfmt-meta-uvc pixfmt-meta-vsp1-hgo pixfmt-meta-vsp1-hgt diff --git a/Documentation/userspace-api/media/v4l/mmap.rst b/Documentation/userspace-api/media/v4l/mmap.rst index 9c44d05ebc3f..16b1e13b029f 100644 --- a/Documentation/userspace-api/media/v4l/mmap.rst +++ b/Documentation/userspace-api/media/v4l/mmap.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _mmap: @@ -42,22 +36,22 @@ This ioctl can also be used to change the number of buffers or to free the allocated memory, provided none of the buffers are still mapped. Before applications can access the buffers they must map them into their -address space with the :ref:`mmap() <func-mmap>` function. The +address space with the :c:func:`mmap()` function. The location of the buffers in device memory can be determined with the :ref:`VIDIOC_QUERYBUF` ioctl. In the single-planar API case, the ``m.offset`` and ``length`` returned in a struct :c:type:`v4l2_buffer` are passed as sixth and second -parameter to the :ref:`mmap() <func-mmap>` function. When using the +parameter to the :c:func:`mmap()` function. When using the multi-planar API, struct :c:type:`v4l2_buffer` contains an array of struct :c:type:`v4l2_plane` structures, each containing its own ``m.offset`` and ``length``. When using the multi-planar API, every plane of every buffer has to be mapped -separately, so the number of calls to :ref:`mmap() <func-mmap>` should +separately, so the number of calls to :c:func:`mmap()` should be equal to number of buffers times number of planes in each buffer. The offset and length values must not be modified. Remember, the buffers are allocated in physical memory, as opposed to virtual memory, which can be swapped out to disk. Applications should free the buffers as soon as -possible with the :ref:`munmap() <func-munmap>` function. +possible with the :c:func:`munmap()` function. Example: Mapping buffers in the single-planar API ================================================= @@ -129,7 +123,6 @@ Example: Mapping buffers in the single-planar API for (i = 0; i < reqbuf.count; i++) munmap(buffers[i].start, buffers[i].length); - Example: Mapping buffers in the multi-planar API ================================================ @@ -245,10 +238,10 @@ be determined at any time using the :ref:`VIDIOC_QUERYBUF` ioctl. Two methods exist to suspend execution of the application until one or more buffers can be dequeued. By default :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` blocks when no buffer is in the outgoing queue. When the ``O_NONBLOCK`` -flag was given to the :ref:`open() <func-open>` function, +flag was given to the :c:func:`open()` function, :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN`` -error code when no buffer is available. The :ref:`select() <func-select>` -or :ref:`poll() <func-poll>` functions are always available. +error code when no buffer is available. The :c:func:`select()` +or :c:func:`poll()` functions are always available. To start and stop capturing or output applications call the :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and :ref:`VIDIOC_STREAMOFF @@ -266,15 +259,15 @@ Drivers implementing memory mapping I/O must support the <VIDIOC_QUERYBUF>`, :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls, the :ref:`mmap() -<func-mmap>`, :ref:`munmap() <func-munmap>`, :ref:`select() -<func-select>` and :ref:`poll() <func-poll>` function. [#f3]_ +<func-mmap>`, :c:func:`munmap()`, :ref:`select() +<func-select>` and :c:func:`poll()` function. [#f3]_ [capture example] .. [#f1] One could use one file descriptor and set the buffer type field accordingly when calling :ref:`VIDIOC_QBUF` etc., - but it makes the :ref:`select() <func-select>` function ambiguous. We also + but it makes the :c:func:`select()` function ambiguous. We also like the clean approach of one file descriptor per logical stream. Video overlay for example is also a logical stream, although the CPU is not needed for continuous operation. @@ -287,6 +280,6 @@ and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls, the :ref:`mmap() scatter-gather lists and the like. .. [#f3] - At the driver level :ref:`select() <func-select>` and :ref:`poll() <func-poll>` are - the same, and :ref:`select() <func-select>` is too important to be optional. + At the driver level :c:func:`select()` and :c:func:`poll()` are + the same, and :c:func:`select()` is too important to be optional. The rest should be evident. diff --git a/Documentation/userspace-api/media/v4l/nv12mt.svg b/Documentation/userspace-api/media/v4l/nv12mt.svg index d4bb4eb83f6a..30a15b5470be 100644 --- a/Documentation/userspace-api/media/v4l/nv12mt.svg +++ b/Documentation/userspace-api/media/v4l/nv12mt.svg @@ -1,31 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- - This file is dual-licensed: you can use it either under the terms - of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this - dual licensing only applies to this file, and not this project as a - whole. - - a) This file is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation version 2 of - the License. - - This file is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - Or, alternatively, - - b) Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later --> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/userspace-api/media/v4l/nv12mt_example.svg b/Documentation/userspace-api/media/v4l/nv12mt_example.svg index e5075af9f45a..d1e2023f4973 100644 --- a/Documentation/userspace-api/media/v4l/nv12mt_example.svg +++ b/Documentation/userspace-api/media/v4l/nv12mt_example.svg @@ -1,31 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- - This file is dual-licensed: you can use it either under the terms - of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this - dual licensing only applies to this file, and not this project as a - whole. - - a) This file is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation version 2 of - the License. - - This file is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - Or, alternatively, - - b) Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later --> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/userspace-api/media/v4l/open.rst b/Documentation/userspace-api/media/v4l/open.rst index 38046ef20141..18bfb9b8137d 100644 --- a/Documentation/userspace-api/media/v4l/open.rst +++ b/Documentation/userspace-api/media/v4l/open.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _open: @@ -13,22 +7,105 @@ Opening and Closing Devices *************************** +.. _v4l2_hardware_control: -Device Naming -============= +Controlling a hardware peripheral via V4L2 +========================================== + +Hardware that is supported using the V4L2 uAPI often consists of multiple +devices or peripherals, each of which have their own driver. + +The bridge driver exposes one or more V4L2 device nodes +(see :ref:`v4l2_device_naming`). + +There are other drivers providing support for other components of +the hardware, which may also expose device nodes, called V4L2 sub-devices. + +When such V4L2 sub-devices are exposed, they allow controlling those +other hardware components - usually connected via a serial bus (like +I²C, SMBus or SPI). Depending on the bridge driver, those sub-devices +can be controlled indirectly via the bridge driver or explicitly via +the :ref:`Media Controller <media_controller>` and via the +:ref:`V4L2 sub-devices <subdev>`. + +The devices that require the use of the +:ref:`Media Controller <media_controller>` are called **MC-centric** +devices. The devices that are fully controlled via V4L2 device nodes +are called **video-node-centric**. + +Userspace can check if a V4L2 hardware peripheral is MC-centric by +calling :ref:`VIDIOC_QUERYCAP` and checking the +:ref:`device_caps field <device-capabilities>`. + +If the device returns ``V4L2_CAP_IO_MC`` flag at ``device_caps``, +then it is MC-centric, otherwise, it is video-node-centric. + +It is required for MC-centric drivers to identify the V4L2 +sub-devices and to configure the pipelines via the +:ref:`media controller API <media_controller>` before using the peripheral. +Also, the sub-devices' configuration shall be controlled via the +:ref:`sub-device API <subdev>`. + +.. note:: + + A video-node-centric may still provide media-controller and + sub-device interfaces as well. + + However, in that case the media-controller and the sub-device + interfaces are read-only and just provide information about the + device. The actual configuration is done via the video nodes. + +.. _v4l2_device_naming: + +V4L2 Device Node Naming +======================= V4L2 drivers are implemented as kernel modules, loaded manually by the system administrator or automatically when a device is first discovered. -The driver modules plug into the "videodev" kernel module. It provides +The driver modules plug into the ``videodev`` kernel module. It provides helper functions and a common application interface specified in this document. Each driver thus loaded registers one or more device nodes with major -number 81 and a minor number between 0 and 255. Minor numbers are -allocated dynamically unless the kernel is compiled with the kernel -option CONFIG_VIDEO_FIXED_MINOR_RANGES. In that case minor numbers -are allocated in ranges depending on the device node type (video, radio, -etc.). +number 81. Minor numbers are allocated dynamically unless the kernel +is compiled with the kernel option CONFIG_VIDEO_FIXED_MINOR_RANGES. +In that case minor numbers are allocated in ranges depending on the +device node type. + +The device nodes supported by the Video4Linux subsystem are: + +======================== ==================================================== +Default device node name Usage +======================== ==================================================== +``/dev/videoX`` Video and metadata for capture/output devices +``/dev/vbiX`` Vertical blank data (i.e. closed captions, teletext) +``/dev/radioX`` Radio tuners and modulators +``/dev/swradioX`` Software Defined Radio tuners and modulators +``/dev/v4l-touchX`` Touch sensors +``/dev/v4l-subdevX`` Video sub-devices (used by sensors and other + components of the hardware peripheral)\ [#]_ +======================== ==================================================== + +Where ``X`` is a non-negative integer. + +.. note:: + + 1. The actual device node name is system-dependent, as udev rules may apply. + 2. There is no guarantee that ``X`` will remain the same for the same + device, as the number depends on the device driver's probe order. + If you need an unique name, udev default rules produce + ``/dev/v4l/by-id/`` and ``/dev/v4l/by-path/`` directories containing + links that can be used uniquely to identify a V4L2 device node:: + + $ tree /dev/v4l + /dev/v4l + ├── by-id + │  └── usb-OmniVision._USB_Camera-B4.04.27.1-video-index0 -> ../../video0 + └── by-path + └── pci-0000:00:14.0-usb-0:2:1.0-video-index0 -> ../../video0 + +.. [#] **V4L2 sub-device nodes** (e. g. ``/dev/v4l-subdevX``) use a different + set of system calls, as covered at :ref:`subdev`. Many drivers support "video_nr", "radio_nr" or "vbi_nr" module options to select specific video/radio/vbi node numbers. This allows the @@ -64,7 +141,6 @@ means applications cannot *reliably* scan for loaded or installed drivers. The user must enter a device name, or the application can try the conventional device names. - .. _related: Related Devices @@ -73,7 +149,7 @@ Related Devices Devices can support several functions. For example video capturing, VBI capturing and radio support. -The V4L2 API creates different nodes for each of these functions. +The V4L2 API creates different V4L2 device nodes for each of these functions. The V4L2 API was designed with the idea that one device node could support all functions. However, in practice this never worked: this @@ -81,19 +157,19 @@ support all functions. However, in practice this never worked: this support it and if they did it was certainly never tested. In addition, switching a device node between different functions only works when using the streaming I/O API, not with the -:ref:`read() <func-read>`/\ :ref:`write() <func-write>` API. +:c:func:`read()`/\ :c:func:`write()` API. -Today each device node supports just one function. +Today each V4L2 device node supports just one function. Besides video input or output the hardware may also support audio sampling or playback. If so, these functions are implemented as ALSA PCM devices with optional ALSA audio mixer devices. One problem with all these devices is that the V4L2 API makes no -provisions to find these related devices. Some really complex devices -use the Media Controller (see :ref:`media_controller`) which can be -used for this purpose. But most drivers do not use it, and while some -code exists that uses sysfs to discover related devices (see +provisions to find these related V4L2 device nodes. Some really complex +hardware use the Media Controller (see :ref:`media_controller`) which can +be used for this purpose. But several drivers do not use it, and while some +code exists that uses sysfs to discover related V4L2 device nodes (see libmedia_dev in the `v4l-utils <http://git.linuxtv.org/cgit.cgi/v4l-utils.git/>`__ git repository), there is no library yet that can provide a single API @@ -102,7 +178,6 @@ the Media Controller. If you want to work on this please write to the linux-media mailing list: `https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__. - Multiple Opens ============== @@ -116,8 +191,8 @@ device should not change the state of the device. [#f2]_ Once an application has allocated the memory buffers needed for streaming data (by calling the :ref:`VIDIOC_REQBUFS` or :ref:`VIDIOC_CREATE_BUFS` ioctls, or -implicitly by calling the :ref:`read() <func-read>` or -:ref:`write() <func-write>` functions) that application (filehandle) +implicitly by calling the :c:func:`read()` or +:c:func:`write()` functions) that application (filehandle) becomes the owner of the device. It is no longer allowed to make changes that would affect the buffer sizes (e.g. by calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl) and other applications are @@ -130,7 +205,6 @@ requested type of data, and to change related properties, to this file descriptor. Applications can request additional access privileges using the priority mechanism described in :ref:`app-pri`. - Shared Data Streams =================== @@ -139,12 +213,11 @@ the same data stream on a device by copying buffers, time multiplexing or similar means. This is better handled by a proxy application in user space. - Functions ========= To open and close V4L2 devices applications use the -:ref:`open() <func-open>` and :ref:`close() <func-close>` function, +:c:func:`open()` and :c:func:`close()` function, respectively. Devices are programmed using the :ref:`ioctl() <func-ioctl>` function as explained in the following sections. @@ -152,7 +225,7 @@ sections. .. [#f1] There are still some old and obscure drivers that have not been updated to allow for multiple opens. This implies that for such - drivers :ref:`open() <func-open>` can return an ``EBUSY`` error code + drivers :c:func:`open()` can return an ``EBUSY`` error code when the device is already in use. .. [#f2] diff --git a/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst b/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst index be9a8385ebc1..2500413e5f43 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _pixfmt-bayer: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst index 3828bb79225d..d585909bc4e2 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ****************** Compressed Formats diff --git a/Documentation/userspace-api/media/v4l/pixfmt-grey.rst b/Documentation/userspace-api/media/v4l/pixfmt-grey.rst index 7b03db3393be..121365b03c57 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-grey.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-grey.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-GREY: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-indexed.rst b/Documentation/userspace-api/media/v4l/pixfmt-indexed.rst index d0d46ed27260..5bd4a47c5854 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-indexed.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-indexed.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _pixfmt-indexed: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-intro.rst b/Documentation/userspace-api/media/v4l/pixfmt-intro.rst index af870895f653..14239ee826bf 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-intro.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-intro.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ********************** Standard Image Formats diff --git a/Documentation/userspace-api/media/v4l/pixfmt-inzi.rst b/Documentation/userspace-api/media/v4l/pixfmt-inzi.rst index f85cccb71741..3115c8f6a842 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-inzi.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-inzi.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-INZI: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-m420.rst b/Documentation/userspace-api/media/v4l/pixfmt-m420.rst index 5180bbe16c6e..13cf36a8cd5c 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-m420.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-m420.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-M420: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst index 4eaf2f9086a9..4e437ba97a0e 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2-meta-fmt-d4xx: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst index 97a9a2925671..5f33d35532ef 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst @@ -1,27 +1,4 @@ -.. This file is dual-licensed: you can use it either under the terms -.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this -.. dual licensing only applies to this file, and not this project as a -.. whole. -.. -.. a) This file is free software; you can redistribute it and/or -.. modify it under the terms of the GNU General Public License version -.. 2.0 as published by the Free Software Foundation. -.. -.. This file is distributed in the hope that it will be useful, -.. but WITHOUT ANY WARRANTY; without even the implied warranty of -.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.. GNU General Public License version 2.0 for more details. -.. -.. Or, alternatively, -.. -.. b) Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later .. _v4l2-meta-fmt-params: .. _v4l2-meta-fmt-stat-3a: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst new file mode 100644 index 000000000000..7e43837ed260 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst @@ -0,0 +1,49 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _v4l2-meta-fmt-params-rkisp1: +.. _v4l2-meta-fmt-stat-rkisp1: + +***************************************************************************** +V4L2_META_FMT_RK_ISP1_PARAMS ('rk1p'), V4L2_META_FMT_RK_ISP1_STAT_3A ('rk1s') +***************************************************************************** + +Configuration parameters +======================== + +The configuration parameters are passed to the +:ref:`rkisp1_params <rkisp1_params>` metadata output video node, using +the :c:type:`v4l2_meta_format` interface. The buffer contains +a single instance of the C structure :c:type:`rkisp1_params_cfg` defined in +``rkisp1-config.h``. So the structure can be obtained from the buffer by: + +.. code-block:: c + + struct rkisp1_params_cfg *params = (struct rkisp1_params_cfg*) buffer; + +.. rkisp1_stat_buffer + +3A and histogram statistics +=========================== + +The ISP1 device collects different statistics over an input Bayer frame. +Those statistics are obtained from the :ref:`rkisp1_stats <rkisp1_stats>` +metadata capture video node, +using the :c:type:`v4l2_meta_format` interface. The buffer contains a single +instance of the C structure :c:type:`rkisp1_stat_buffer` defined in +``rkisp1-config.h``. So the structure can be obtained from the buffer by: + +.. code-block:: c + + struct rkisp1_stat_buffer *stats = (struct rkisp1_stat_buffer*) buffer; + +The statistics collected are Exposure, AWB (Auto-white balance), Histogram and +AF (Auto-focus). See :c:type:`rkisp1_stat_buffer` for details of the statistics. + +The 3A statistics and configuration parameters described here are usually +consumed and produced by dedicated user space libraries that comprise the +important tuning tools using software control loop. + +rkisp1 uAPI data types +====================== + +.. kernel-doc:: drivers/staging/media/rkisp1/uapi/rkisp1-config.h diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst index debc50285a25..784346d14bbd 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2-meta-fmt-uvc: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst index 34a2382ef91c..7173e2c3e245 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst @@ -1,28 +1,4 @@ -.. This file is dual-licensed: you can use it either under the terms -.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this -.. dual licensing only applies to this file, and not this project as a -.. whole. -.. -.. a) This file is free software; you can redistribute it and/or -.. modify it under the terms of the GNU General Public License as -.. published by the Free Software Foundation version 2 of -.. the License. -.. -.. This file is distributed in the hope that it will be useful, -.. but WITHOUT ANY WARRANTY; without even the implied warranty of -.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.. GNU General Public License for more details. -.. -.. Or, alternatively, -.. -.. b) Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later .. _v4l2-meta-fmt-vivid: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst index b780e447dd4b..8d886feb180c 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2-meta-fmt-vsp1-hgo: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst index e165320cc1ff..d8830ff605de 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2-meta-fmt-vsp1-hgt: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv12.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv12.rst index 19d47b38e02a..dd2f38129fe6 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-nv12.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-nv12.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-NV12: .. _V4L2-PIX-FMT-NV21: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv12m.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv12m.rst index 115ea603c13f..250f8b977605 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-nv12m.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-nv12m.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-NV12M: .. _v4l2-pix-fmt-nv12mt-16x16: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv12mt.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv12mt.rst index daac1c16d4f2..46f63d793ec5 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-nv12mt.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-nv12mt.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-NV12MT: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv16.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv16.rst index 977636fc98d6..22295fc0c359 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-nv16.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-nv16.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-NV16: .. _V4L2-PIX-FMT-NV61: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv16m.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv16m.rst index cf33942d942d..812bf2ccabf0 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-nv16m.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-nv16m.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-NV16M: .. _v4l2-pix-fmt-nv61m: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv24.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv24.rst index c6fb97bd0472..bf1b94062fc2 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-nv24.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-nv24.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-NV24: .. _V4L2-PIX-FMT-NV42: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-packed-hsv.rst b/Documentation/userspace-api/media/v4l/pixfmt-packed-hsv.rst index b8c9b0225eea..dd89860f50e0 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-packed-hsv.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-packed-hsv.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _packed-hsv: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst index bbd4bd094deb..84262208dd1c 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _packed-yuv: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst index 59b9e7238f90..c9231e18859b 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _pixfmt-reserved: @@ -263,20 +256,3 @@ please make a proposal on the linux-media mailing list. of tiles, resulting in 32-aligned resolutions for the luminance plane and 16-aligned resolutions for the chrominance plane (with 2x2 subsampling). - -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| - -.. _format-flags: - -.. flat-table:: Format Flags - :header-rows: 0 - :stub-columns: 0 - :widths: 3 1 4 - - * - ``V4L2_PIX_FMT_FLAG_PREMUL_ALPHA`` - - 0x00000001 - - The color values are premultiplied by the alpha channel value. For - example, if a light blue pixel with 50% transparency was described - by RGBA values (128, 192, 255, 128), the same pixel described with - premultiplied colors would be described by RGBA values (64, 96, - 128, 128) diff --git a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst index 89cc2a37b285..9d827097c1d9 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _pixfmt-rgb: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs08.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs08.rst index 13f3908d162a..bd6ee6111de4 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs08.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs08.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2-sdr-fmt-cs8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs14le.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs14le.rst index 41e5b990d499..ea21b288d357 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs14le.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs14le.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-SDR-FMT-CS14LE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu08.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu08.rst index 1085b5ad8eb7..45fce09d85ff 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu08.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu08.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2-sdr-fmt-cu8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu16le.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu16le.rst index 9772b30bda95..7f4242f8da6f 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu16le.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu16le.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-SDR-FMT-CU16LE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu16be.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu16be.rst index 53a0a862f33a..a4d4b70ece63 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu16be.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu16be.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-SDR-FMT-PCU16BE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu18be.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu18be.rst index 7f2d2545fb04..3db690bd683a 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu18be.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu18be.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-SDR-FMT-PCU18BE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu20be.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu20be.rst index 9f3d67b4e94c..485343cdf150 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu20be.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu20be.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-SDR-FMT-PCU20BE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-ru12le.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-ru12le.rst index c9cde8d425f7..2ad4706bfc7a 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-ru12le.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-ru12le.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-SDR-FMT-RU12LE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst index 5afa02a66698..15f1900cd914 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2-pix-fmt-ipu3-sbggr10: .. _v4l2-pix-fmt-ipu3-sgbrg10: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10.rst index 37cc1bb8241f..a66414ab4291 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-SRGGB10: .. _v4l2-pix-fmt-sbggr10: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10alaw8.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10alaw8.rst index f1b8627f0141..a5ae1f099e68 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10alaw8.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10alaw8.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-SBGGR10ALAW8: .. _v4l2-pix-fmt-sgbrg10alaw8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10dpcm8.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10dpcm8.rst index 9814c4ffac68..f0544c6f4580 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10dpcm8.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10dpcm8.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-SBGGR10DPCM8: .. _v4l2-pix-fmt-sgbrg10dpcm8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst index 76a4d278e640..dc52e827b5d3 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-SRGGB10P: .. _v4l2-pix-fmt-sbggr10p: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb12.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb12.rst index 98ae80b968ae..15c34e1e4835 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb12.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb12.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-SRGGB12: .. _v4l2-pix-fmt-sbggr12: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst index 7309dd7fa60f..a2f8ebfceb84 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-SRGGB12P: .. _v4l2-pix-fmt-sbggr12p: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst index a4c7a392fe7f..7e5d45f30cab 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-SRGGB14: .. _v4l2-pix-fmt-sbggr14: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst index e2f5a2b36092..e25baedfca77 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-SRGGB14P: .. _v4l2-pix-fmt-sbggr14p: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst index 885f0d1f331d..93a210e22592 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-SRGGB16: .. _v4l2-pix-fmt-sbggr16: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst index c275e6ef09f9..81e72f115994 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-SRGGB8: .. _v4l2-pix-fmt-sbggr8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-td08.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-td08.rst index 165c9be2bfc5..ec89f43c60ec 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-tch-td08.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-td08.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-TCH-FMT-DELTA-TD08: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-td16.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-td16.rst index 6dca01182175..7b59a6424243 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-tch-td16.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-td16.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-TCH-FMT-DELTA-TD16: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-tu08.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu08.rst index f1380b72977f..63c5264b8668 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-tch-tu08.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu08.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-TCH-FMT-TU08: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-tu16.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu16.rst index 2b9e1b15abcf..ade618a037a8 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-tch-tu16.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu16.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-TCH-FMT-TU16: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-uv8.rst b/Documentation/userspace-api/media/v4l/pixfmt-uv8.rst index a36c1a4d64a4..ff1d73ef5dba 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-uv8.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-uv8.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-UV8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-uyvy.rst b/Documentation/userspace-api/media/v4l/pixfmt-uyvy.rst index 776cb37f76f1..bae975fb14f6 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-uyvy.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-uyvy.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-UYVY: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst b/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst index 444b4082684c..977facc3a1f4 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ****************************** Multi-planar format structures @@ -105,29 +98,21 @@ describing all planes of that format. * - __u8 - ``ycbcr_enc`` - Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`. - This information supplements the ``colorspace`` and must be set by - the driver for capture streams and by the application for output - streams, see :ref:`colorspaces`. + See struct :c:type:`v4l2_pix_format`. * - __u8 - ``hsv_enc`` - HSV encoding, from enum :c:type:`v4l2_hsv_encoding`. - This information supplements the ``colorspace`` and must be set by - the driver for capture streams and by the application for output - streams, see :ref:`colorspaces`. + See struct :c:type:`v4l2_pix_format`. * - } - * - __u8 - ``quantization`` - Quantization range, from enum :c:type:`v4l2_quantization`. - This information supplements the ``colorspace`` and must be set by - the driver for capture streams and by the application for output - streams, see :ref:`colorspaces`. + See struct :c:type:`v4l2_pix_format`. * - __u8 - ``xfer_func`` - Transfer function, from enum :c:type:`v4l2_xfer_func`. - This information supplements the ``colorspace`` and must be set by - the driver for capture streams and by the application for output - streams, see :ref:`colorspaces`. + See struct :c:type:`v4l2_pix_format`. * - __u8 - ``reserved[7]`` - Reserved for future extensions. Should be zeroed by drivers and diff --git a/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst b/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst index e0ee2823ab1f..71e828093310 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ****************************** Single-planar format structure @@ -116,7 +109,14 @@ Single-planar format structure - Image colorspace, from enum :c:type:`v4l2_colorspace`. This information supplements the ``pixelformat`` and must be set by the driver for capture streams and by the application for - output streams, see :ref:`colorspaces`. + output streams, see :ref:`colorspaces`. If the application sets the + flag ``V4L2_PIX_FMT_FLAG_SET_CSC`` then the application can set + this field for a capture stream to request a specific colorspace + for the captured image data. If the driver cannot handle requested + conversion, it will return another supported colorspace. + The driver indicates that colorspace conversion is supported by setting + the flag V4L2_FMT_FLAG_CSC_COLORSPACE in the corresponding struct + :c:type:`v4l2_fmtdesc` during enumeration. See :ref:`fmtdesc-flags`. * - __u32 - ``priv`` - This field indicates whether the remaining fields of the @@ -153,13 +153,29 @@ Single-planar format structure - Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`. This information supplements the ``colorspace`` and must be set by the driver for capture streams and by the application for output - streams, see :ref:`colorspaces`. + streams, see :ref:`colorspaces`. If the application sets the + flag ``V4L2_PIX_FMT_FLAG_SET_CSC`` then the application can set + this field for a capture stream to request a specific Y'CbCr encoding + for the captured image data. If the driver cannot handle requested + conversion, it will return another supported encoding. + This field is ignored for HSV pixelformats. The driver indicates that + ycbcr_enc conversion is supported by setting the flag + V4L2_FMT_FLAG_CSC_YCBCR_ENC in the corresponding struct + :c:type:`v4l2_fmtdesc` during enumeration. See :ref:`fmtdesc-flags`. * - __u32 - ``hsv_enc`` - HSV encoding, from enum :c:type:`v4l2_hsv_encoding`. This information supplements the ``colorspace`` and must be set by the driver for capture streams and by the application for output - streams, see :ref:`colorspaces`. + streams, see :ref:`colorspaces`. If the application sets the flag + ``V4L2_PIX_FMT_FLAG_SET_CSC`` then the application can set this + field for a capture stream to request a specific HSV encoding for the + captured image data. If the driver cannot handle requested + conversion, it will return another supported encoding. + This field is ignored for non-HSV pixelformats. The driver indicates + that hsv_enc conversion is supported by setting the flag + V4L2_FMT_FLAG_CSC_HSV_ENC in the corresponding struct + :c:type:`v4l2_fmtdesc` during enumeration. See :ref:`fmtdesc-flags`. * - } - * - __u32 @@ -167,10 +183,58 @@ Single-planar format structure - Quantization range, from enum :c:type:`v4l2_quantization`. This information supplements the ``colorspace`` and must be set by the driver for capture streams and by the application for output - streams, see :ref:`colorspaces`. + streams, see :ref:`colorspaces`. If the application sets the flag + ``V4L2_PIX_FMT_FLAG_SET_CSC`` then the application can set + this field for a capture stream to request a specific quantization + range for the captured image data. If the driver cannot handle requested + conversion, it will return another supported quantization. + The driver indicates that quantization conversion is supported by setting + the flag V4L2_FMT_FLAG_CSC_QUANTIZATION in the corresponding struct + :c:type:`v4l2_fmtdesc` during enumeration. See :ref:`fmtdesc-flags`. * - __u32 - ``xfer_func`` - Transfer function, from enum :c:type:`v4l2_xfer_func`. This information supplements the ``colorspace`` and must be set by the driver for capture streams and by the application for output - streams, see :ref:`colorspaces`. + streams, see :ref:`colorspaces`. If the application sets the flag + ``V4L2_PIX_FMT_FLAG_SET_CSC`` then the application can set + this field for a capture stream to request a specific transfer function + for the captured image data. If the driver cannot handle requested + conversion, it will return another supported transfer function. + The driver indicates that xfer_func conversion is supported by setting + the flag V4L2_FMT_FLAG_CSC_XFER_FUNC in the corresponding struct + :c:type:`v4l2_fmtdesc` during enumeration. See :ref:`fmtdesc-flags`. + +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| + +.. _format-flags: + +.. flat-table:: Format Flags + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 4 + + * - ``V4L2_PIX_FMT_FLAG_PREMUL_ALPHA`` + - 0x00000001 + - The color values are premultiplied by the alpha channel value. For + example, if a light blue pixel with 50% transparency was described + by RGBA values (128, 192, 255, 128), the same pixel described with + premultiplied colors would be described by RGBA values (64, 96, + 128, 128) + * .. _`v4l2-pix-fmt-flag-set-csc`: + + - ``V4L2_PIX_FMT_FLAG_SET_CSC`` + - 0x00000002 + - Set by the application. It is only used for capture and is + ignored for output streams. If set, then request the device to do + colorspace conversion from the received colorspace to the requested + colorspace values. If the colorimetry field (``colorspace``, ``xfer_func``, + ``ycbcr_enc``, ``hsv_enc`` or ``quantization``) is set to ``*_DEFAULT``, + then that colorimetry setting will remain unchanged from what was received. + So in order to change the quantization, only the ``quantization`` field shall + be set to non default value (``V4L2_QUANTIZATION_FULL_RANGE`` or + ``V4L2_QUANTIZATION_LIM_RANGE``) and all other colorimetry fields shall + be set to ``*_DEFAULT``. + + To check which conversions are supported by the hardware for the current + pixel format, see :ref:`fmtdesc-flags`. diff --git a/Documentation/userspace-api/media/v4l/pixfmt-vyuy.rst b/Documentation/userspace-api/media/v4l/pixfmt-vyuy.rst index 6cd574e78e4c..aff8588b67a9 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-vyuy.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-vyuy.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-VYUY: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y10.rst b/Documentation/userspace-api/media/v4l/pixfmt-y10.rst index dfb352ae6784..05f018dd883f 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y10.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y10.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-Y10: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y10b.rst b/Documentation/userspace-api/media/v4l/pixfmt-y10b.rst index b5d89d6d5c52..38d353b37df9 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y10b.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y10b.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-Y10BPACK: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y10p.rst b/Documentation/userspace-api/media/v4l/pixfmt-y10p.rst index ffb6e1631b78..dd20d3438732 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y10p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y10p.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-Y10P: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y12.rst b/Documentation/userspace-api/media/v4l/pixfmt-y12.rst index 4226c49232de..20e12a18da72 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y12.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y12.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-Y12: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y12i.rst b/Documentation/userspace-api/media/v4l/pixfmt-y12i.rst index b4752754337b..d9b539381d74 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y12i.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y12i.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-Y12I: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y14.rst b/Documentation/userspace-api/media/v4l/pixfmt-y14.rst index d702b6549160..2a4826b77105 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y14.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y14.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-Y14: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y16-be.rst b/Documentation/userspace-api/media/v4l/pixfmt-y16-be.rst index f4eda7b95b51..6d70cd78cbf6 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y16-be.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y16-be.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-Y16-BE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y16.rst b/Documentation/userspace-api/media/v4l/pixfmt-y16.rst index a092b0a5ff12..398ad8ba5d64 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y16.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y16.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-Y16: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y41p.rst b/Documentation/userspace-api/media/v4l/pixfmt-y41p.rst index 211afd7593cc..d14cedf8f317 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y41p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y41p.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-Y41P: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y8i.rst b/Documentation/userspace-api/media/v4l/pixfmt-y8i.rst index 4248c6f735b7..770ed4749c14 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y8i.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y8i.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-Y8I: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv410.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv410.rst index 1d20115f2b1d..de2e519adc60 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv410.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv410.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-YVU410: .. _v4l2-pix-fmt-yuv410: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv411p.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv411p.rst index 967ba7ce41a2..998aa9b1328f 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv411p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv411p.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-YUV411P: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv420.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv420.rst index 7cb685cc8289..f1c7baf32685 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv420.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv420.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-YVU420: .. _V4L2-PIX-FMT-YUV420: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv420m.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv420m.rst index 80c14d4f5acb..cd20a57e0621 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv420m.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv420m.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-YUV420M: .. _v4l2-pix-fmt-yvu420m: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv422m.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv422m.rst index 29b78480ccad..32bf15e1426e 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv422m.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv422m.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-YUV422M: .. _v4l2-pix-fmt-yvu422m: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv422p.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv422p.rst index 73fde222d820..b178be558361 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv422p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv422p.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-YUV422P: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv444m.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv444m.rst index 7073ac7f842d..90bdee2e2b0d 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv444m.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv444m.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-YUV444M: .. _v4l2-pix-fmt-yvu444m: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuyv.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuyv.rst index fe70e007787d..ca073a5098a9 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuyv.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuyv.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-YUYV: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yvyu.rst b/Documentation/userspace-api/media/v4l/pixfmt-yvyu.rst index 96c1b537d5a0..81ebec525ae5 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yvyu.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yvyu.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-YVYU: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-z16.rst b/Documentation/userspace-api/media/v4l/pixfmt-z16.rst index fe2fb21edeea..54a8cd723d1a 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-z16.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-z16.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _V4L2-PIX-FMT-Z16: diff --git a/Documentation/userspace-api/media/v4l/pixfmt.rst b/Documentation/userspace-api/media/v4l/pixfmt.rst index 70ca3a5c2cf1..11dab4a90630 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _pixfmt: diff --git a/Documentation/userspace-api/media/v4l/planar-apis.rst b/Documentation/userspace-api/media/v4l/planar-apis.rst index 6247b0c4ab4d..9207ce4283df 100644 --- a/Documentation/userspace-api/media/v4l/planar-apis.rst +++ b/Documentation/userspace-api/media/v4l/planar-apis.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _planar-apis: diff --git a/Documentation/userspace-api/media/v4l/querycap.rst b/Documentation/userspace-api/media/v4l/querycap.rst index 35fba2a9e09b..15a90271af45 100644 --- a/Documentation/userspace-api/media/v4l/querycap.rst +++ b/Documentation/userspace-api/media/v4l/querycap.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _querycap: diff --git a/Documentation/userspace-api/media/v4l/rw.rst b/Documentation/userspace-api/media/v4l/rw.rst index ce2768c994d0..64b85fb2a328 100644 --- a/Documentation/userspace-api/media/v4l/rw.rst +++ b/Documentation/userspace-api/media/v4l/rw.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _rw: @@ -13,8 +7,8 @@ Read/Write ********** -Input and output devices support the :ref:`read() <func-read>` and -:ref:`write() <func-write>` function, respectively, when the +Input and output devices support the :c:func:`read()` and +:c:func:`write()` function, respectively, when the ``V4L2_CAP_READWRITE`` flag in the ``capabilities`` field of struct :c:type:`v4l2_capability` returned by the :ref:`VIDIOC_QUERYCAP` ioctl is set. @@ -29,18 +23,17 @@ However this is also the simplest I/O method, requiring little or no setup to exchange data. It permits command line stunts like this (the vidctrl tool is fictitious): - .. code-block:: none $ vidctrl /dev/video --input=0 --format=YUYV --size=352x288 $ dd if=/dev/video of=myimage.422 bs=202752 count=1 -To read from the device applications use the :ref:`read() <func-read>` -function, to write the :ref:`write() <func-write>` function. Drivers +To read from the device applications use the :c:func:`read()` +function, to write the :c:func:`write()` function. Drivers must implement one I/O method if they exchange data with applications, but it need not be this. [#f1]_ When reading or writing is supported, the -driver must also support the :ref:`select() <func-select>` and -:ref:`poll() <func-poll>` function. [#f2]_ +driver must also support the :c:func:`select()` and +:c:func:`poll()` function. [#f2]_ .. [#f1] It would be desirable if applications could depend on drivers @@ -50,5 +43,5 @@ driver must also support the :ref:`select() <func-select>` and capturing still images. .. [#f2] - At the driver level :ref:`select() <func-select>` and :ref:`poll() <func-poll>` are - the same, and :ref:`select() <func-select>` is too important to be optional. + At the driver level :c:func:`select()` and :c:func:`poll()` are + the same, and :c:func:`select()` is too important to be optional. diff --git a/Documentation/userspace-api/media/v4l/sdr-formats.rst b/Documentation/userspace-api/media/v4l/sdr-formats.rst index b7a1be75251f..d8bdfdb56911 100644 --- a/Documentation/userspace-api/media/v4l/sdr-formats.rst +++ b/Documentation/userspace-api/media/v4l/sdr-formats.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _sdr-formats: diff --git a/Documentation/userspace-api/media/v4l/selection-api-configuration.rst b/Documentation/userspace-api/media/v4l/selection-api-configuration.rst index 67ff67fd734e..37617eda2fa6 100644 --- a/Documentation/userspace-api/media/v4l/selection-api-configuration.rst +++ b/Documentation/userspace-api/media/v4l/selection-api-configuration.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ************* Configuration diff --git a/Documentation/userspace-api/media/v4l/selection-api-examples.rst b/Documentation/userspace-api/media/v4l/selection-api-examples.rst index 2f4027211129..5f8e8a1f59d7 100644 --- a/Documentation/userspace-api/media/v4l/selection-api-examples.rst +++ b/Documentation/userspace-api/media/v4l/selection-api-examples.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ******** Examples diff --git a/Documentation/userspace-api/media/v4l/selection-api-intro.rst b/Documentation/userspace-api/media/v4l/selection-api-intro.rst index 0994ca25be5e..6534854ae9f7 100644 --- a/Documentation/userspace-api/media/v4l/selection-api-intro.rst +++ b/Documentation/userspace-api/media/v4l/selection-api-intro.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ************ Introduction diff --git a/Documentation/userspace-api/media/v4l/selection-api-targets.rst b/Documentation/userspace-api/media/v4l/selection-api-targets.rst index 56eab969c9d8..50fdadd5b307 100644 --- a/Documentation/userspace-api/media/v4l/selection-api-targets.rst +++ b/Documentation/userspace-api/media/v4l/selection-api-targets.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later ***************** Selection targets diff --git a/Documentation/userspace-api/media/v4l/selection-api-vs-crop-api.rst b/Documentation/userspace-api/media/v4l/selection-api-vs-crop-api.rst index a9360a000022..f57b9180012c 100644 --- a/Documentation/userspace-api/media/v4l/selection-api-vs-crop-api.rst +++ b/Documentation/userspace-api/media/v4l/selection-api-vs-crop-api.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _selection-vs-crop: diff --git a/Documentation/userspace-api/media/v4l/selection-api.rst b/Documentation/userspace-api/media/v4l/selection-api.rst index b86e387721df..0360743746dc 100644 --- a/Documentation/userspace-api/media/v4l/selection-api.rst +++ b/Documentation/userspace-api/media/v4l/selection-api.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _selection-api: diff --git a/Documentation/userspace-api/media/v4l/selection.svg b/Documentation/userspace-api/media/v4l/selection.svg index c0e00ab2ae6b..6305b53b8e54 100644 --- a/Documentation/userspace-api/media/v4l/selection.svg +++ b/Documentation/userspace-api/media/v4l/selection.svg @@ -1,31 +1,5 @@ <?xml version="1.0" encoding="UTF-8"?> -<!-- - This file is dual-licensed: you can use it either under the terms - of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this - dual licensing only applies to this file, and not this project as a - whole. - - a) This file is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation version 2 of - the License. - - This file is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - Or, alternatively, - - b) Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later --> <svg enable-background="new" version="1" viewBox="0 0 4226.3 1686.8" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"> <defs> <pattern id="ig" xlink:href="#ka" patternTransform="matrix(5.4432 0 0 10.1 1722.4 161.06)"/> diff --git a/Documentation/userspace-api/media/v4l/selections-common.rst b/Documentation/userspace-api/media/v4l/selections-common.rst index d5ea05869a61..322b39cf0eba 100644 --- a/Documentation/userspace-api/media/v4l/selections-common.rst +++ b/Documentation/userspace-api/media/v4l/selections-common.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2-selections-common: diff --git a/Documentation/userspace-api/media/v4l/standard.rst b/Documentation/userspace-api/media/v4l/standard.rst index 61c341508eb3..1f6678325da9 100644 --- a/Documentation/userspace-api/media/v4l/standard.rst +++ b/Documentation/userspace-api/media/v4l/standard.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _standard: diff --git a/Documentation/userspace-api/media/v4l/streaming-par.rst b/Documentation/userspace-api/media/v4l/streaming-par.rst index 6d1a1b93ac8b..806cbfdad0f1 100644 --- a/Documentation/userspace-api/media/v4l/streaming-par.rst +++ b/Documentation/userspace-api/media/v4l/streaming-par.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _streaming-par: @@ -21,13 +15,13 @@ The current video standard determines a nominal number of frames per second. If less than this number of frames is to be captured or output, applications can request frame skipping or duplicating on the driver side. This is especially useful when using the -:ref:`read() <func-read>` or :ref:`write() <func-write>`, which are +:c:func:`read()` or :c:func:`write()`, which are not augmented by timestamps or sequence counters, and to avoid unnecessary data copying. Finally these ioctls can be used to determine the number of buffers used internally by a driver in read/write mode. For implications see the -section discussing the :ref:`read() <func-read>` function. +section discussing the :c:func:`read()` function. To get and set the streaming parameters applications call the :ref:`VIDIOC_G_PARM <VIDIOC_G_PARM>` and diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst index 9a4d61b0d76f..c9b7bb3ca089 100644 --- a/Documentation/userspace-api/media/v4l/subdev-formats.rst +++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2-mbus-format: @@ -41,32 +34,107 @@ Media Bus Formats :ref:`field-order` for details. * - __u32 - ``colorspace`` - - Image colorspace, from enum - :c:type:`v4l2_colorspace`. See - :ref:`colorspaces` for details. + - Image colorspace, from enum :c:type:`v4l2_colorspace`. + Must be set by the driver for subdevices. If the application sets the + flag ``V4L2_MBUS_FRAMEFMT_SET_CSC`` then the application can set this + field on the source pad to request a specific colorspace for the media + bus data. If the driver cannot handle the requested conversion, it will + return another supported colorspace. The driver indicates that colorspace + conversion is supported by setting the flag + V4L2_SUBDEV_MBUS_CODE_CSC_COLORSPACE in the corresponding struct + :c:type:`v4l2_subdev_mbus_code_enum` during enumeration. + See :ref:`v4l2-subdev-mbus-code-flags`. + * - union { + - (anonymous) * - __u16 - ``ycbcr_enc`` - Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`. This information supplements the ``colorspace`` and must be set by - the driver for capture streams and by the application for output - streams, see :ref:`colorspaces`. + the driver for subdevices, see :ref:`colorspaces`. If the application + sets the flag ``V4L2_MBUS_FRAMEFMT_SET_CSC`` then the application can set + this field on a source pad to request a specific Y'CbCr encoding + for the media bus data. If the driver cannot handle the requested + conversion, it will return another supported encoding. + This field is ignored for HSV media bus formats. The driver indicates + that ycbcr_enc conversion is supported by setting the flag + V4L2_SUBDEV_MBUS_CODE_CSC_YCBCR_ENC in the corresponding struct + :c:type:`v4l2_subdev_mbus_code_enum` during enumeration. + See :ref:`v4l2-subdev-mbus-code-flags`. + * - __u16 + - ``hsv_enc`` + - HSV encoding, from enum :c:type:`v4l2_hsv_encoding`. + This information supplements the ``colorspace`` and must be set by + the driver for subdevices, see :ref:`colorspaces`. If the application + sets the flag ``V4L2_MBUS_FRAMEFMT_SET_CSC`` then the application can set + this field on a source pad to request a specific HSV encoding + for the media bus data. If the driver cannot handle the requested + conversion, it will return another supported encoding. + This field is ignored for Y'CbCr media bus formats. The driver indicates + that hsv_enc conversion is supported by setting the flag + V4L2_SUBDEV_MBUS_CODE_CSC_HSV_ENC in the corresponding struct + :c:type:`v4l2_subdev_mbus_code_enum` during enumeration. + See :ref:`v4l2-subdev-mbus-code-flags` + * - } + - * - __u16 - ``quantization`` - Quantization range, from enum :c:type:`v4l2_quantization`. This information supplements the ``colorspace`` and must be set by - the driver for capture streams and by the application for output - streams, see :ref:`colorspaces`. + the driver for subdevices, see :ref:`colorspaces`. If the application + sets the flag ``V4L2_MBUS_FRAMEFMT_SET_CSC`` then the application can set + this field on a source pad to request a specific quantization + for the media bus data. If the driver cannot handle the requested + conversion, it will return another supported quantization. + The driver indicates that quantization conversion is supported by + setting the flag V4L2_SUBDEV_MBUS_CODE_CSC_QUANTIZATION in the + corresponding struct :c:type:`v4l2_subdev_mbus_code_enum` + during enumeration. See :ref:`v4l2-subdev-mbus-code-flags`. + * - __u16 - ``xfer_func`` - Transfer function, from enum :c:type:`v4l2_xfer_func`. This information supplements the ``colorspace`` and must be set by - the driver for capture streams and by the application for output - streams, see :ref:`colorspaces`. + the driver for subdevices, see :ref:`colorspaces`. If the application + sets the flag ``V4L2_MBUS_FRAMEFMT_SET_CSC`` then the application can set + this field on a source pad to request a specific transfer + function for the media bus data. If the driver cannot handle the requested + conversion, it will return another supported transfer function. + The driver indicates that the transfer function conversion is supported by + setting the flag V4L2_SUBDEV_MBUS_CODE_CSC_XFER_FUNC in the + corresponding struct :c:type:`v4l2_subdev_mbus_code_enum` + during enumeration. See :ref:`v4l2-subdev-mbus-code-flags`. * - __u16 - - ``reserved``\ [11] + - ``flags`` + - flags See: :ref:v4l2-mbus-framefmt-flags + * - __u16 + - ``reserved``\ [10] - Reserved for future extensions. Applications and drivers must set the array to zero. +.. _v4l2-mbus-framefmt-flags: + +.. flat-table:: v4l2_mbus_framefmt Flags + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 4 + + * .. _`mbus-framefmt-set-csc`: + + - ``V4L2_MBUS_FRAMEFMT_SET_CSC`` + - 0x0001 + - Set by the application. It is only used for source pads and is + ignored for sink pads. If set, then request the subdevice to do + colorspace conversion from the received colorspace to the requested + colorspace values. If the colorimetry field (``colorspace``, ``xfer_func``, + ``ycbcr_enc``, ``hsv_enc`` or ``quantization``) is set to ``*_DEFAULT``, + then that colorimetry setting will remain unchanged from what was received. + So in order to change the quantization, only the ``quantization`` field shall + be set to non default value (``V4L2_QUANTIZATION_FULL_RANGE`` or + ``V4L2_QUANTIZATION_LIM_RANGE``) and all other colorimetry fields shall + be set to ``*_DEFAULT``. + + To check which conversions are supported by the hardware for the current + media bus frame format, see :ref:`v4l2-subdev-mbus-code-flags`. .. _v4l2-mbus-pixelcode: diff --git a/Documentation/userspace-api/media/v4l/subdev-image-processing-crop.svg b/Documentation/userspace-api/media/v4l/subdev-image-processing-crop.svg index 109bbcebd3b4..d92311281e01 100644 --- a/Documentation/userspace-api/media/v4l/subdev-image-processing-crop.svg +++ b/Documentation/userspace-api/media/v4l/subdev-image-processing-crop.svg @@ -1,14 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- - Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later --> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/userspace-api/media/v4l/subdev-image-processing-full.svg b/Documentation/userspace-api/media/v4l/subdev-image-processing-full.svg index cfdb7532d5b6..864a594ff8d0 100644 --- a/Documentation/userspace-api/media/v4l/subdev-image-processing-full.svg +++ b/Documentation/userspace-api/media/v4l/subdev-image-processing-full.svg @@ -1,14 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- - Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later --> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/userspace-api/media/v4l/subdev-image-processing-scaling-multi-source.svg b/Documentation/userspace-api/media/v4l/subdev-image-processing-scaling-multi-source.svg index f7f1379d30a6..b75755d31f15 100644 --- a/Documentation/userspace-api/media/v4l/subdev-image-processing-scaling-multi-source.svg +++ b/Documentation/userspace-api/media/v4l/subdev-image-processing-scaling-multi-source.svg @@ -1,14 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- - Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later --> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/userspace-api/media/v4l/tch-formats.rst b/Documentation/userspace-api/media/v4l/tch-formats.rst index f83aec85fd76..8c941ff9e200 100644 --- a/Documentation/userspace-api/media/v4l/tch-formats.rst +++ b/Documentation/userspace-api/media/v4l/tch-formats.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _tch-formats: diff --git a/Documentation/userspace-api/media/v4l/tuner.rst b/Documentation/userspace-api/media/v4l/tuner.rst index 02a396eb6613..e2c53c3abdc6 100644 --- a/Documentation/userspace-api/media/v4l/tuner.rst +++ b/Documentation/userspace-api/media/v4l/tuner.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _tuner: diff --git a/Documentation/userspace-api/media/v4l/user-func.rst b/Documentation/userspace-api/media/v4l/user-func.rst index bf77c842718e..53e604bd7d60 100644 --- a/Documentation/userspace-api/media/v4l/user-func.rst +++ b/Documentation/userspace-api/media/v4l/user-func.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _user-func: diff --git a/Documentation/userspace-api/media/v4l/userp.rst b/Documentation/userspace-api/media/v4l/userp.rst index 2d0fa7353066..db224f9b611e 100644 --- a/Documentation/userspace-api/media/v4l/userp.rst +++ b/Documentation/userspace-api/media/v4l/userp.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _userp: @@ -85,10 +79,10 @@ buffers it must wait until an empty buffer can be dequeued and reused. Two methods exist to suspend execution of the application until one or more buffers can be dequeued. By default :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` blocks when no buffer is in the outgoing queue. When the -``O_NONBLOCK`` flag was given to the :ref:`open() <func-open>` function, +``O_NONBLOCK`` flag was given to the :c:func:`open()` function, :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN`` error code when no buffer is available. The :ref:`select() -<func-select>` or :ref:`poll() <func-poll>` function are always +<func-select>` or :c:func:`poll()` function are always available. To start and stop capturing or output applications call the @@ -108,7 +102,7 @@ Drivers implementing user pointer I/O must support the :ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`, :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls, the -:ref:`select() <func-select>` and :ref:`poll() <func-poll>` function. [#f2]_ +:c:func:`select()` and :c:func:`poll()` function. [#f2]_ .. [#f1] We expect that frequently used buffers are typically not swapped out. @@ -123,6 +117,6 @@ and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls, the because an application may share them with other processes. .. [#f2] - At the driver level :ref:`select() <func-select>` and :ref:`poll() <func-poll>` are - the same, and :ref:`select() <func-select>` is too important to be optional. + At the driver level :c:func:`select()` and :c:func:`poll()` are + the same, and :c:func:`select()` is too important to be optional. The rest should be evident. diff --git a/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst b/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst index 5c6f351b2443..3a834d050110 100644 --- a/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst +++ b/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2-selection-flags: diff --git a/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst b/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst index 69f500093aa2..e877ebbdb32e 100644 --- a/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst +++ b/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2-selection-targets: diff --git a/Documentation/userspace-api/media/v4l/v4l2.rst b/Documentation/userspace-api/media/v4l/v4l2.rst index 35796c4fbe52..ad7a2bf0cf26 100644 --- a/Documentation/userspace-api/media/v4l/v4l2.rst +++ b/Documentation/userspace-api/media/v4l/v4l2.rst @@ -1,13 +1,6 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections - +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. include:: <isonum.txt> + .. _v4l2spec: ############################ diff --git a/Documentation/userspace-api/media/v4l/v4l2grab-example.rst b/Documentation/userspace-api/media/v4l/v4l2grab-example.rst index 270738876f72..b323be42c580 100644 --- a/Documentation/userspace-api/media/v4l/v4l2grab-example.rst +++ b/Documentation/userspace-api/media/v4l/v4l2grab-example.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _v4l2grab-example: diff --git a/Documentation/userspace-api/media/v4l/v4l2grab.c.rst b/Documentation/userspace-api/media/v4l/v4l2grab.c.rst index a21ff357a830..eaa0f95048e7 100644 --- a/Documentation/userspace-api/media/v4l/v4l2grab.c.rst +++ b/Documentation/userspace-api/media/v4l/v4l2grab.c.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later file: media/v4l/v4l2grab.c ========================== diff --git a/Documentation/userspace-api/media/v4l/vbi_525.svg b/Documentation/userspace-api/media/v4l/vbi_525.svg index b7d09057617e..b01086d466a6 100644 --- a/Documentation/userspace-api/media/v4l/vbi_525.svg +++ b/Documentation/userspace-api/media/v4l/vbi_525.svg @@ -1,14 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- - Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later --> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/userspace-api/media/v4l/vbi_625.svg b/Documentation/userspace-api/media/v4l/vbi_625.svg index e1f5e8552c37..41c1ce920d14 100644 --- a/Documentation/userspace-api/media/v4l/vbi_625.svg +++ b/Documentation/userspace-api/media/v4l/vbi_625.svg @@ -1,14 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- - Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later --> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/userspace-api/media/v4l/vbi_hsync.svg b/Documentation/userspace-api/media/v4l/vbi_hsync.svg index 77606a7b00a4..7fcf12a7ece0 100644 --- a/Documentation/userspace-api/media/v4l/vbi_hsync.svg +++ b/Documentation/userspace-api/media/v4l/vbi_hsync.svg @@ -1,14 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- - Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.1 or any later version published by the Free Software - Foundation, with no Invariant Sections, no Front-Cover Texts - and no Back-Cover Texts. A copy of the license is included at - Documentation/userspace-api/media/fdl-appendix.rst. - - TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ---> +<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later --> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/userspace-api/media/v4l/video.rst b/Documentation/userspace-api/media/v4l/video.rst index 9b73dba0eb8d..f8f69a57602c 100644 --- a/Documentation/userspace-api/media/v4l/video.rst +++ b/Documentation/userspace-api/media/v4l/video.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _video: diff --git a/Documentation/userspace-api/media/v4l/videodev.rst b/Documentation/userspace-api/media/v4l/videodev.rst index c8244b895802..c866fec417eb 100644 --- a/Documentation/userspace-api/media/v4l/videodev.rst +++ b/Documentation/userspace-api/media/v4l/videodev.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _videodev: diff --git a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst index f2a702870fad..b06e5b528e11 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_CREATE_BUFS: @@ -18,24 +12,22 @@ Name VIDIOC_CREATE_BUFS - Create buffers for Memory Mapped or User Pointer or DMA Buffer I/O - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_CREATE_BUFS, struct v4l2_create_buffers *argp ) - :name: VIDIOC_CREATE_BUFS +.. c:macro:: VIDIOC_CREATE_BUFS +``int ioctl(int fd, VIDIOC_CREATE_BUFS, struct v4l2_create_buffers *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_create_buffers`. - Description =========== @@ -78,7 +70,6 @@ the actual number allocated and the starting index in the ``count`` and the ``index`` fields respectively. On return ``count`` can be smaller than the number requested. - .. c:type:: v4l2_create_buffers .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -120,17 +111,12 @@ than the number requested. If you want to just query the capabilities without making any other changes, then set ``count`` to 0, ``memory`` to ``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type. - * - __u32 - - ``flags`` - - Specifies additional buffer management attributes. - See :ref:`memory-flags`. * - __u32 - - ``reserved``\ [6] + - ``reserved``\ [7] - A place holder for future extensions. Drivers and applications must set the array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst b/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst index 035ed9d577ae..00c31410d4e4 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_CROPCAP: @@ -18,24 +12,22 @@ Name VIDIOC_CROPCAP - Information about the video cropping and scaling abilities - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_CROPCAP, struct v4l2_cropcap *argp ) - :name: VIDIOC_CROPCAP +.. c:macro:: VIDIOC_CROPCAP +``int ioctl(int fd, VIDIOC_CROPCAP, struct v4l2_cropcap *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_cropcap`. - Description =========== @@ -102,7 +94,6 @@ overlay devices. Starting with kernel 4.13 both variations are allowed. - .. _v4l2-rect-crop: .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -127,7 +118,6 @@ overlay devices. - ``height`` - Height of the rectangle, in pixels. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst index 16078a2d3e3d..bde6e952b267 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_DBG_G_CHIP_INFO: @@ -18,24 +12,22 @@ Name VIDIOC_DBG_G_CHIP_INFO - Identify the chips on a TV card - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_DBG_G_CHIP_INFO, struct v4l2_dbg_chip_info *argp ) - :name: VIDIOC_DBG_G_CHIP_INFO +.. c:macro:: VIDIOC_DBG_G_CHIP_INFO +``int ioctl(int fd, VIDIOC_DBG_G_CHIP_INFO, struct v4l2_dbg_chip_info *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_dbg_chip_info`. - Description =========== @@ -83,7 +75,6 @@ is available from the LinuxTV v4l-dvb repository; see `https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access instructions. - .. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}| .. _name-v4l2-dbg-match: @@ -110,7 +101,6 @@ instructions. - - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_dbg_chip_info @@ -137,7 +127,6 @@ instructions. - Reserved fields, both application and driver must set these to 0. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _name-chip-match-types: @@ -155,7 +144,6 @@ instructions. - 4 - Match the nth sub-device. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst index 6311a63278a5..e1a6abe705bd 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_DBG_G_REGISTER: @@ -18,27 +12,26 @@ Name VIDIOC_DBG_G_REGISTER - VIDIOC_DBG_S_REGISTER - Read or write hardware registers - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_DBG_G_REGISTER, struct v4l2_dbg_register *argp ) - :name: VIDIOC_DBG_G_REGISTER +.. c:macro:: VIDIOC_DBG_G_REGISTER + +``int ioctl(int fd, VIDIOC_DBG_G_REGISTER, struct v4l2_dbg_register *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_DBG_S_REGISTER, const struct v4l2_dbg_register *argp ) - :name: VIDIOC_DBG_S_REGISTER +.. c:macro:: VIDIOC_DBG_S_REGISTER +``int ioctl(int fd, VIDIOC_DBG_S_REGISTER, const struct v4l2_dbg_register *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_dbg_register`. - Description =========== @@ -92,7 +85,6 @@ It is available from the LinuxTV v4l-dvb repository; see `https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access instructions. - .. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}| .. c:type:: v4l2_dbg_match @@ -119,7 +111,6 @@ instructions. - - .. c:type:: v4l2_dbg_register .. flat-table:: struct v4l2_dbg_register @@ -140,7 +131,6 @@ instructions. - The value read from, or to be written into the register. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _chip-match-types: @@ -158,7 +148,6 @@ instructions. - 4 - Match the nth sub-device. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst b/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst index 7986a248bff9..fd71ceece037 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_DECODER_CMD: @@ -18,28 +12,26 @@ Name VIDIOC_DECODER_CMD - VIDIOC_TRY_DECODER_CMD - Execute an decoder command - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_DECODER_CMD, struct v4l2_decoder_cmd *argp ) - :name: VIDIOC_DECODER_CMD +.. c:macro:: VIDIOC_DECODER_CMD +``int ioctl(int fd, VIDIOC_DECODER_CMD, struct v4l2_decoder_cmd *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_TRY_DECODER_CMD, struct v4l2_decoder_cmd *argp ) - :name: VIDIOC_TRY_DECODER_CMD +.. c:macro:: VIDIOC_TRY_DECODER_CMD +``int ioctl(int fd, VIDIOC_TRY_DECODER_CMD, struct v4l2_decoder_cmd *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` pointer to struct :c:type:`v4l2_decoder_cmd`. - Description =========== @@ -54,11 +46,11 @@ this structure. The ``cmd`` field must contain the command code. Some commands use the ``flags`` field for additional information. -A :ref:`write() <func-write>` or :ref:`VIDIOC_STREAMON` +A :c:func:`write()` or :ref:`VIDIOC_STREAMON` call sends an implicit START command to the decoder if it has not been started yet. Applies to both queues of mem2mem decoders. -A :ref:`close() <func-close>` or :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` +A :c:func:`close()` or :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` call of a streaming file descriptor sends an implicit immediate STOP command to the decoder, and all buffered data is discarded. Applies to both queues of mem2mem decoders. @@ -67,7 +59,6 @@ In principle, these ioctls are optional, not all drivers may support them. They introduced in Linux 3.3. They are, however, mandatory for stateful mem2mem decoders (as further documented in :ref:`decoder`). - .. tabularcolumns:: |p{1.1cm}|p{2.4cm}|p{1.2cm}|p{1.6cm}|p{10.6cm}| .. c:type:: v4l2_decoder_cmd @@ -138,7 +129,6 @@ introduced in Linux 3.3. They are, however, mandatory for stateful mem2mem decod - - .. tabularcolumns:: |p{5.6cm}|p{0.6cm}|p{11.3cm}| .. _decoder-cmds: diff --git a/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst b/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst index 9412be0c3747..634af717c8ba 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_DQEVENT: @@ -18,24 +12,22 @@ Name VIDIOC_DQEVENT - Dequeue event - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_DQEVENT, struct v4l2_event *argp ) - :name: VIDIOC_DQEVENT +.. c:macro:: VIDIOC_DQEVENT +``int ioctl(int fd, VIDIOC_DQEVENT, struct v4l2_event *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_event`. - Description =========== @@ -45,7 +37,6 @@ structure are filled by the driver. The file handle will also receive exceptions which the application may get by e.g. using the select system call. - .. tabularcolumns:: |p{3.0cm}|p{4.4cm}|p{2.4cm}|p{7.7cm}| .. c:type:: v4l2_event @@ -107,7 +98,6 @@ call. zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. cssclass:: longtable @@ -198,7 +188,6 @@ call. - Base event number for driver-private events. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_event_vsync @@ -213,7 +202,6 @@ call. - The upcoming field. See enum :c:type:`v4l2_field`. - .. tabularcolumns:: |p{3.5cm}|p{3.0cm}|p{1.8cm}|p{8.5cm}| .. c:type:: v4l2_event_ctrl @@ -264,7 +252,6 @@ call. :ref:`v4l2_queryctrl <v4l2-queryctrl>`. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_event_frame_sync @@ -279,7 +266,6 @@ call. - The sequence number of the frame being received. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_event_src_change @@ -295,7 +281,6 @@ call. :ref:`src-changes-flags`. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_event_motion_det @@ -325,7 +310,6 @@ call. automatically assigned to the default region 0. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _ctrl-changes-flags: @@ -351,7 +335,6 @@ call. step or the default value of the control changed. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _src-changes-flags: @@ -382,7 +365,6 @@ call. loss of signal and so restarting streaming I/O is required in order for the hardware to synchronize to the video signal. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst b/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst index 60730c32bfe4..27bd6a83e42c 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_DV_TIMINGS_CAP: @@ -18,27 +12,26 @@ Name VIDIOC_DV_TIMINGS_CAP - VIDIOC_SUBDEV_DV_TIMINGS_CAP - The capabilities of the Digital Video receiver/transmitter - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_DV_TIMINGS_CAP, struct v4l2_dv_timings_cap *argp ) - :name: VIDIOC_DV_TIMINGS_CAP +.. c:macro:: VIDIOC_DV_TIMINGS_CAP + +``int ioctl(int fd, VIDIOC_DV_TIMINGS_CAP, struct v4l2_dv_timings_cap *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_DV_TIMINGS_CAP, struct v4l2_dv_timings_cap *argp ) - :name: VIDIOC_SUBDEV_DV_TIMINGS_CAP +.. c:macro:: VIDIOC_SUBDEV_DV_TIMINGS_CAP +``int ioctl(int fd, VIDIOC_SUBDEV_DV_TIMINGS_CAP, struct v4l2_dv_timings_cap *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_dv_timings_cap`. - Description =========== @@ -62,7 +55,6 @@ the desired pad number in the struct zero the ``reserved`` array. Attempts to query capabilities on a pad that doesn't support them will return an ``EINVAL`` error code. - .. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}| .. c:type:: v4l2_bt_timings_cap @@ -104,7 +96,6 @@ that doesn't support them will return an ``EINVAL`` error code. Drivers must set the array to zero. - .. tabularcolumns:: |p{1.0cm}|p{4.0cm}|p{3.5cm}|p{9.2cm}| .. c:type:: v4l2_dv_timings_cap @@ -160,7 +151,6 @@ that doesn't support them will return an ``EINVAL`` error code. - Can support non-standard timings, i.e. timings not belonging to the standards set in the ``standards`` field. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst b/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst index d0eacce5485e..5673606711b4 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_ENCODER_CMD: @@ -18,22 +12,22 @@ Name VIDIOC_ENCODER_CMD - VIDIOC_TRY_ENCODER_CMD - Execute an encoder command - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_ENCODER_CMD, struct v4l2_encoder_cmd *argp ) - :name: VIDIOC_ENCODER_CMD +.. c:macro:: VIDIOC_ENCODER_CMD + +``int ioctl(int fd, VIDIOC_ENCODER_CMD, struct v4l2_encoder_cmd *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_TRY_ENCODER_CMD, struct v4l2_encoder_cmd *argp ) - :name: VIDIOC_TRY_ENCODER_CMD +.. c:macro:: VIDIOC_TRY_ENCODER_CMD +``int ioctl(int fd, VIDIOC_TRY_ENCODER_CMD, struct v4l2_encoder_cmd *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_encoder_cmd`. @@ -54,16 +48,16 @@ this structure. The ``cmd`` field must contain the command code. Some commands use the ``flags`` field for additional information. -After a STOP command, :ref:`read() <func-read>` calls will read +After a STOP command, :c:func:`read()` calls will read the remaining data buffered by the driver. When the buffer is empty, -:ref:`read() <func-read>` will return zero and the next :ref:`read() <func-read>` +:c:func:`read()` will return zero and the next :c:func:`read()` call will restart the encoder. -A :ref:`read() <func-read>` or :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` +A :c:func:`read()` or :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` call sends an implicit START command to the encoder if it has not been started yet. Applies to both queues of mem2mem encoders. -A :ref:`close() <func-close>` or :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` +A :c:func:`close()` or :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` call of a streaming file descriptor sends an implicit immediate STOP to the encoder, and all buffered data is discarded. Applies to both queues of mem2mem encoders. @@ -72,7 +66,6 @@ These ioctls are optional, not all drivers may support them. They were introduced in Linux 2.6.21. They are, however, mandatory for stateful mem2mem encoders (as further documented in :ref:`encoder`). - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_encoder_cmd @@ -96,7 +89,6 @@ encoders (as further documented in :ref:`encoder`). the array to zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _encoder-cmds: @@ -141,7 +133,6 @@ encoders (as further documented in :ref:`encoder`). the encoder is already running, this command does nothing. No flags are defined for this command. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _encoder-flags: @@ -158,7 +149,6 @@ encoders (as further documented in :ref:`encoder`). Does not apply to :ref:`encoder`. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst index 89d6b860193a..20730cd4f6ef 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_ENUM_DV_TIMINGS: @@ -18,27 +12,26 @@ Name VIDIOC_ENUM_DV_TIMINGS - VIDIOC_SUBDEV_ENUM_DV_TIMINGS - Enumerate supported Digital Video timings - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_ENUM_DV_TIMINGS, struct v4l2_enum_dv_timings *argp ) - :name: VIDIOC_ENUM_DV_TIMINGS +.. c:macro:: VIDIOC_ENUM_DV_TIMINGS + +``int ioctl(int fd, VIDIOC_ENUM_DV_TIMINGS, struct v4l2_enum_dv_timings *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_DV_TIMINGS, struct v4l2_enum_dv_timings *argp ) - :name: VIDIOC_SUBDEV_ENUM_DV_TIMINGS +.. c:macro:: VIDIOC_SUBDEV_ENUM_DV_TIMINGS +``int ioctl(int fd, VIDIOC_SUBDEV_ENUM_DV_TIMINGS, struct v4l2_enum_dv_timings *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_enum_dv_timings`. - Description =========== @@ -72,7 +65,6 @@ pad number in the struct Attempts to enumerate timings on a pad that doesn't support them will return an ``EINVAL`` error code. - .. c:type:: v4l2_enum_dv_timings .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -98,7 +90,6 @@ return an ``EINVAL`` error code. - ``timings`` - The timings. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst index 05835e04c20b..2b3fa9c23146 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_ENUM_FMT: @@ -18,24 +12,22 @@ Name VIDIOC_ENUM_FMT - Enumerate image formats - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FMT, struct v4l2_fmtdesc *argp ) - :name: VIDIOC_ENUM_FMT +.. c:macro:: VIDIOC_ENUM_FMT +``int ioctl(int fd, VIDIOC_ENUM_FMT, struct v4l2_fmtdesc *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_fmtdesc`. - Description =========== @@ -79,7 +71,6 @@ the ``mbus_code`` field is handled differently: formats shall not depend on the active configuration of the video device or device pipeline. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_fmtdesc @@ -144,7 +135,6 @@ the ``mbus_code`` field is handled differently: zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _fmtdesc-flags: @@ -198,7 +188,41 @@ the ``mbus_code`` field is handled differently: This flag can only be used in combination with the ``V4L2_FMT_FLAG_COMPRESSED`` flag, since this applies to compressed formats only. This flag is valid for stateful encoders only. - + * - ``V4L2_FMT_FLAG_CSC_COLORSPACE`` + - 0x0020 + - The driver allows the application to try to change the default + colorspace. This flag is relevant only for capture devices. + The application can ask to configure the colorspace of the capture device + when calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl with + :ref:`V4L2_PIX_FMT_FLAG_SET_CSC <v4l2-pix-fmt-flag-set-csc>` set. + * - ``V4L2_FMT_FLAG_CSC_XFER_FUNC`` + - 0x0040 + - The driver allows the application to try to change the default + transfer function. This flag is relevant only for capture devices. + The application can ask to configure the transfer function of the capture + device when calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl with + :ref:`V4L2_PIX_FMT_FLAG_SET_CSC <v4l2-pix-fmt-flag-set-csc>` set. + * - ``V4L2_FMT_FLAG_CSC_YCBCR_ENC`` + - 0x0080 + - The driver allows the application to try to change the default + Y'CbCr encoding. This flag is relevant only for capture devices. + The application can ask to configure the Y'CbCr encoding of the capture device + when calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl with + :ref:`V4L2_PIX_FMT_FLAG_SET_CSC <v4l2-pix-fmt-flag-set-csc>` set. + * - ``V4L2_FMT_FLAG_CSC_HSV_ENC`` + - 0x0080 + - The driver allows the application to try to change the default + HSV encoding. This flag is relevant only for capture devices. + The application can ask to configure the HSV encoding of the capture device + when calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl with + :ref:`V4L2_PIX_FMT_FLAG_SET_CSC <v4l2-pix-fmt-flag-set-csc>` set. + * - ``V4L2_FMT_FLAG_CSC_QUANTIZATION`` + - 0x0100 + - The driver allows the application to try to change the default + quantization. This flag is relevant only for capture devices. + The application can ask to configure the quantization of the capture + device when calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl with + :ref:`V4L2_PIX_FMT_FLAG_SET_CSC <v4l2-pix-fmt-flag-set-csc>` set. Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst index 0e3db737371f..1f0949726045 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_ENUM_FRAMEINTERVALS: @@ -18,25 +12,23 @@ Name VIDIOC_ENUM_FRAMEINTERVALS - Enumerate frame intervals - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FRAMEINTERVALS, struct v4l2_frmivalenum *argp ) - :name: VIDIOC_ENUM_FRAMEINTERVALS +.. c:macro:: VIDIOC_ENUM_FRAMEINTERVALS +``int ioctl(int fd, VIDIOC_ENUM_FRAMEINTERVALS, struct v4l2_frmivalenum *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_frmivalenum` that contains a pixel format and size and receives a frame interval. - Description =========== @@ -98,7 +90,6 @@ other ioctl calls while it runs the frame interval enumeration. frame_rate = 1 / frame_interval - Structs ======= @@ -106,7 +97,6 @@ In the structs below, *IN* denotes a value that has to be filled in by the application, *OUT* denotes values that the driver fills in. The application should zero out all members except for the *IN* fields. - .. c:type:: v4l2_frmival_stepwise .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -127,7 +117,6 @@ application should zero out all members except for the *IN* fields. - Frame interval step size [s]. - .. c:type:: v4l2_frmivalenum .. tabularcolumns:: |p{1.8cm}|p{4.4cm}|p{2.4cm}|p{8.9cm}| @@ -170,11 +159,9 @@ application should zero out all members except for the *IN* fields. applications. - Enums ===== - .. c:type:: v4l2_frmivaltypes .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| @@ -194,7 +181,6 @@ Enums - 3 - Step-wise defined frame interval. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst index 1934d7da9743..c9a36bcf699f 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_ENUM_FRAMESIZES: @@ -18,26 +12,24 @@ Name VIDIOC_ENUM_FRAMESIZES - Enumerate frame sizes - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FRAMESIZES, struct v4l2_frmsizeenum *argp ) - :name: VIDIOC_ENUM_FRAMESIZES +.. c:macro:: VIDIOC_ENUM_FRAMESIZES +``int ioctl(int fd, VIDIOC_ENUM_FRAMESIZES, struct v4l2_frmsizeenum *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_frmsizeenum` that contains an index and pixel format and receives a frame width and height. - Description =========== @@ -88,7 +80,6 @@ without any interaction from the application itself. This means that the enumeration data is consistent if the application does not perform any other ioctl calls while it runs the frame size enumeration. - Structs ======= @@ -96,7 +87,6 @@ In the structs below, *IN* denotes a value that has to be filled in by the application, *OUT* denotes values that the driver fills in. The application should zero out all members except for the *IN* fields. - .. c:type:: v4l2_frmsize_discrete .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -114,7 +104,6 @@ application should zero out all members except for the *IN* fields. - Height of the frame [pixel]. - .. c:type:: v4l2_frmsize_stepwise .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -144,7 +133,6 @@ application should zero out all members except for the *IN* fields. - Frame height step size [pixel]. - .. c:type:: v4l2_frmsizeenum .. tabularcolumns:: |p{1.4cm}|p{5.9cm}|p{2.3cm}|p{8.0cm}| @@ -180,11 +168,9 @@ application should zero out all members except for the *IN* fields. applications. - Enums ===== - .. c:type:: v4l2_frmsizetypes .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| @@ -204,7 +190,6 @@ Enums - 3 - Step-wise defined frame size. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst index ee3ba67601fa..a0764fca8d18 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_ENUM_FREQ_BANDS: @@ -18,24 +12,22 @@ Name VIDIOC_ENUM_FREQ_BANDS - Enumerate supported frequency bands - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FREQ_BANDS, struct v4l2_frequency_band *argp ) - :name: VIDIOC_ENUM_FREQ_BANDS +.. c:macro:: VIDIOC_ENUM_FREQ_BANDS +``int ioctl(int fd, VIDIOC_ENUM_FREQ_BANDS, struct v4l2_frequency_band *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_frequency_band`. - Description =========== @@ -48,7 +40,6 @@ fields, and zero out the ``reserved`` array of a struct This ioctl is supported if the ``V4L2_TUNER_CAP_FREQ_BANDS`` capability of the corresponding tuner/modulator is set. - .. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}| .. c:type:: v4l2_frequency_band @@ -117,7 +108,6 @@ of the corresponding tuner/modulator is set. Applications and drivers must set the array to zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _band-modulation: @@ -137,7 +127,6 @@ of the corresponding tuner/modulator is set. - 0x08 - Amplitude Modulation, commonly used for analog radio. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumaudio.rst b/Documentation/userspace-api/media/v4l/vidioc-enumaudio.rst index afe4821e5863..7873e5434d3e 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enumaudio.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enumaudio.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_ENUMAUDIO: @@ -18,24 +12,22 @@ Name VIDIOC_ENUMAUDIO - Enumerate audio inputs - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_ENUMAUDIO, struct v4l2_audio *argp ) - :name: VIDIOC_ENUMAUDIO +.. c:macro:: VIDIOC_ENUMAUDIO +``int ioctl(int fd, VIDIOC_ENUMAUDIO, struct v4l2_audio *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_audio`. - Description =========== @@ -50,7 +42,6 @@ zero, incrementing by one until the driver returns ``EINVAL``. See :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` for a description of struct :c:type:`v4l2_audio`. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumaudioout.rst b/Documentation/userspace-api/media/v4l/vidioc-enumaudioout.rst index 31c2ae460e2d..d4c3ba320834 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enumaudioout.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enumaudioout.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_ENUMAUDOUT: @@ -18,24 +12,22 @@ Name VIDIOC_ENUMAUDOUT - Enumerate audio outputs - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_ENUMAUDOUT, struct v4l2_audioout *argp ) - :name: VIDIOC_ENUMAUDOUT +.. c:macro:: VIDIOC_ENUMAUDOUT +``int ioctl(int fd, VIDIOC_ENUMAUDOUT, struct v4l2_audioout *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_audioout`. - Description =========== @@ -55,7 +47,6 @@ zero, incrementing by one until the driver returns ``EINVAL``. See :ref:`VIDIOC_G_AUDIOout <VIDIOC_G_AUDOUT>` for a description of struct :c:type:`v4l2_audioout`. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst b/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst index 510670bff3de..0f62e681a827 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_ENUMINPUT: @@ -18,24 +12,22 @@ Name VIDIOC_ENUMINPUT - Enumerate video inputs - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_ENUMINPUT, struct v4l2_input *argp ) - :name: VIDIOC_ENUMINPUT +.. c:macro:: VIDIOC_ENUMINPUT +``int ioctl(int fd, VIDIOC_ENUMINPUT, struct v4l2_input *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_input`. - Description =========== @@ -46,7 +38,6 @@ fill the rest of the structure or return an ``EINVAL`` error code when the index is out of bounds. To enumerate all inputs applications shall begin at index zero, incrementing by one until the driver returns ``EINVAL``. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_input @@ -110,7 +101,6 @@ at index zero, incrementing by one until the driver returns ``EINVAL``. zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _input-type: @@ -133,7 +123,6 @@ at index zero, incrementing by one until the driver returns ``EINVAL``. - This input is a touch device for capturing raw touch data. - .. tabularcolumns:: |p{4.8cm}|p{2.6cm}|p{10.1cm}| .. _input-status: @@ -205,7 +194,6 @@ at index zero, incrementing by one until the driver returns ``EINVAL``. - VTR time constant. [?] - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _input-capabilities: @@ -229,7 +217,6 @@ at index zero, incrementing by one until the driver returns ``EINVAL``. ``V4L2_SEL_TGT_NATIVE_SIZE`` selection target, see :ref:`v4l2-selections-common`. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst b/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst index 591a99cf8000..91fcf99094d2 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_ENUMOUTPUT: @@ -18,24 +12,22 @@ Name VIDIOC_ENUMOUTPUT - Enumerate video outputs - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_ENUMOUTPUT, struct v4l2_output *argp ) - :name: VIDIOC_ENUMOUTPUT +.. c:macro:: VIDIOC_ENUMOUTPUT +``int ioctl(int fd, VIDIOC_ENUMOUTPUT, struct v4l2_output *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_output`. - Description =========== @@ -47,7 +39,6 @@ when the index is out of bounds. To enumerate all outputs applications shall begin at index zero, incrementing by one until the driver returns ``EINVAL``. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_output @@ -105,7 +96,6 @@ shall begin at index zero, incrementing by one until the driver returns zero. - .. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}| .. _output-type: @@ -128,7 +118,6 @@ shall begin at index zero, incrementing by one until the driver returns - The video output will be copied to a :ref:`video overlay <overlay>`. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _output-capabilities: @@ -152,7 +141,6 @@ shall begin at index zero, incrementing by one until the driver returns ``V4L2_SEL_TGT_NATIVE_SIZE`` selection target, see :ref:`v4l2-selections-common`. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst b/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst index 8a0508536c13..b5704e8cf909 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_ENUMSTD: @@ -18,27 +12,26 @@ Name VIDIOC_ENUMSTD - VIDIOC_SUBDEV_ENUMSTD - Enumerate supported video standards - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_ENUMSTD, struct v4l2_standard *argp ) - :name: VIDIOC_ENUMSTD +.. c:macro:: VIDIOC_ENUMSTD + +``int ioctl(int fd, VIDIOC_ENUMSTD, struct v4l2_standard *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUMSTD, struct v4l2_standard *argp ) - :name: VIDIOC_SUBDEV_ENUMSTD +.. c:macro:: VIDIOC_SUBDEV_ENUMSTD +``int ioctl(int fd, VIDIOC_SUBDEV_ENUMSTD, struct v4l2_standard *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_standard`. - Description =========== @@ -52,7 +45,6 @@ zero, incrementing by one until the driver returns ``EINVAL``. Drivers may enumerate a different set of standards after switching the video input or output. [#f1]_ - .. c:type:: v4l2_standard .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -92,7 +84,6 @@ or output. [#f1]_ zero. - .. c:type:: v4l2_fract .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -109,7 +100,6 @@ or output. [#f1]_ - ``denominator`` - - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. _v4l2-std-id: @@ -127,7 +117,6 @@ or output. [#f1]_ standards. - .. code-block:: c #define V4L2_STD_PAL_B ((v4l2_std_id)0x00000001) @@ -149,7 +138,6 @@ rate, and PAL color modulation with a 4.43 MHz color subcarrier. Some PAL video recorders can play back NTSC tapes in this mode for display on a 50/60 Hz agnostic PAL TV. - .. code-block:: c #define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) @@ -159,7 +147,6 @@ a 50/60 Hz agnostic PAL TV. ``V4L2_STD_NTSC_443`` is a hybrid standard with 525 lines, 60 Hz refresh rate, and NTSC color modulation with a 4.43 MHz color subcarrier. - .. code-block:: c #define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000) @@ -182,7 +169,6 @@ terrestrial digital TV standards. Presently the V4L2 API does not support digital TV. See also the Linux DVB API at `https://linuxtv.org <https://linuxtv.org>`__. - .. code-block:: c #define V4L2_STD_PAL_BG (V4L2_STD_PAL_B | @@ -235,7 +221,6 @@ support digital TV. See also the Linux DVB API at #define V4L2_STD_ALL (V4L2_STD_525_60 | V4L2_STD_625_50) - .. raw:: latex \begingroup @@ -310,7 +295,6 @@ support digital TV. See also the Linux DVB API at \endgroup - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst b/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst index 384a9be9eba0..212377c90442 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_EXPBUF: @@ -18,24 +12,22 @@ Name VIDIOC_EXPBUF - Export a buffer as a DMABUF file descriptor. - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_EXPBUF, struct v4l2_exportbuffer *argp ) - :name: VIDIOC_EXPBUF +.. c:macro:: VIDIOC_EXPBUF +``int ioctl(int fd, VIDIOC_EXPBUF, struct v4l2_exportbuffer *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_exportbuffer`. - Description =========== @@ -70,11 +62,9 @@ for details about importing DMABUF files into V4L2 nodes. It is recommended to close a DMABUF file when it is no longer used to allow the associated memory to be reclaimed. - Examples ======== - .. code-block:: c int buffer_export(int v4lfd, enum v4l2_buf_type bt, int index, int *dmafd) @@ -94,7 +84,6 @@ Examples return 0; } - .. code-block:: c int buffer_export_mp(int v4lfd, enum v4l2_buf_type bt, int index, @@ -121,7 +110,6 @@ Examples return 0; } - .. c:type:: v4l2_exportbuffer .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -162,7 +150,6 @@ Examples - Reserved field for future use. Drivers and applications must set the array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst b/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst index 68531bcb62ab..4c93bd55bd97 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_AUDIO: @@ -18,27 +12,26 @@ Name VIDIOC_G_AUDIO - VIDIOC_S_AUDIO - Query or select the current audio input and its attributes - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_AUDIO, struct v4l2_audio *argp ) - :name: VIDIOC_G_AUDIO +.. c:macro:: VIDIOC_G_AUDIO + +``int ioctl(int fd, VIDIOC_G_AUDIO, struct v4l2_audio *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_AUDIO, const struct v4l2_audio *argp ) - :name: VIDIOC_S_AUDIO +.. c:macro:: VIDIOC_S_AUDIO +``int ioctl(int fd, VIDIOC_S_AUDIO, const struct v4l2_audio *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_audio`. - Description =========== @@ -56,7 +49,6 @@ ioctl. Drivers may switch to a different audio mode if the request cannot be satisfied. However, this is a write-only ioctl, it does not return the actual new audio mode. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_audio @@ -87,7 +79,6 @@ return the actual new audio mode. the array to zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _audio-capability: @@ -108,7 +99,6 @@ return the actual new audio mode. - Automatic Volume Level mode is supported. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _audio-mode: @@ -122,7 +112,6 @@ return the actual new audio mode. - 0x00001 - AVL mode is on. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst b/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst index e13b74bf5ce3..194f22493517 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_AUDOUT: @@ -18,27 +12,26 @@ Name VIDIOC_G_AUDOUT - VIDIOC_S_AUDOUT - Query or select the current audio output - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_AUDOUT, struct v4l2_audioout *argp ) - :name: VIDIOC_G_AUDOUT +.. c:macro:: VIDIOC_G_AUDOUT + +``int ioctl(int fd, VIDIOC_G_AUDOUT, struct v4l2_audioout *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_AUDOUT, const struct v4l2_audioout *argp ) - :name: VIDIOC_S_AUDOUT +.. c:macro:: VIDIOC_S_AUDOUT +``int ioctl(int fd, VIDIOC_S_AUDOUT, const struct v4l2_audioout *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_audioout`. - Description =========== @@ -63,7 +56,6 @@ as ``VIDIOC_G_AUDOUT`` does. Connectors on a TV card to loop back the received audio signal to a sound card are not audio outputs in this sense. - .. c:type:: v4l2_audioout .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -94,7 +86,6 @@ as ``VIDIOC_G_AUDOUT`` does. - Reserved for future extensions. Drivers and applications must set the array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst index 10e086be55d5..0ac1509e41cc 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_CROP: @@ -18,27 +12,26 @@ Name VIDIOC_G_CROP - VIDIOC_S_CROP - Get or set the current cropping rectangle - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_CROP, struct v4l2_crop *argp ) - :name: VIDIOC_G_CROP +.. c:macro:: VIDIOC_G_CROP + +``int ioctl(int fd, VIDIOC_G_CROP, struct v4l2_crop *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_CROP, const struct v4l2_crop *argp ) - :name: VIDIOC_S_CROP +.. c:macro:: VIDIOC_S_CROP +``int ioctl(int fd, VIDIOC_S_CROP, const struct v4l2_crop *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_crop`. - Description =========== @@ -76,7 +69,6 @@ been negotiated. When cropping is not supported then no parameters are changed and :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` returns the ``EINVAL`` error code. - .. c:type:: v4l2_crop .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -107,7 +99,6 @@ When cropping is not supported then no parameters are changed and Starting with kernel 4.13 both variations are allowed. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst index 9831b7514028..4f1bed53fad5 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_CTRL: @@ -18,27 +12,26 @@ Name VIDIOC_G_CTRL - VIDIOC_S_CTRL - Get or set the value of a control - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_CTRL, struct v4l2_control *argp ) - :name: VIDIOC_G_CTRL +.. c:macro:: VIDIOC_G_CTRL + +``int ioctl(int fd, VIDIOC_G_CTRL, struct v4l2_control *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_CTRL, struct v4l2_control *argp ) - :name: VIDIOC_S_CTRL +.. c:macro:: VIDIOC_S_CTRL +``int ioctl(int fd, VIDIOC_S_CTRL, struct v4l2_control *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_control`. - Description =========== @@ -62,7 +55,6 @@ These ioctls work only with user controls. For other control classes the :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` or :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` must be used. - .. c:type:: v4l2_control .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -79,7 +71,6 @@ These ioctls work only with user controls. For other control classes the - ``value`` - New value or current value. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst b/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst index 9a035a4ea0f0..760a33d43b7d 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_DV_TIMINGS: @@ -18,33 +12,34 @@ Name VIDIOC_G_DV_TIMINGS - VIDIOC_S_DV_TIMINGS - VIDIOC_SUBDEV_G_DV_TIMINGS - VIDIOC_SUBDEV_S_DV_TIMINGS - Get or set DV timings for input or output - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_DV_TIMINGS, struct v4l2_dv_timings *argp ) - :name: VIDIOC_G_DV_TIMINGS +.. c:macro:: VIDIOC_G_DV_TIMINGS + +``int ioctl(int fd, VIDIOC_G_DV_TIMINGS, struct v4l2_dv_timings *argp)`` + +.. c:macro:: VIDIOC_S_DV_TIMINGS + +``int ioctl(int fd, VIDIOC_S_DV_TIMINGS, struct v4l2_dv_timings *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_DV_TIMINGS, struct v4l2_dv_timings *argp ) - :name: VIDIOC_S_DV_TIMINGS +.. c:macro:: VIDIOC_SUBDEV_G_DV_TIMINGS -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_DV_TIMINGS, struct v4l2_dv_timings *argp ) - :name: VIDIOC_SUBDEV_G_DV_TIMINGS +``int ioctl(int fd, VIDIOC_SUBDEV_G_DV_TIMINGS, struct v4l2_dv_timings *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_DV_TIMINGS, struct v4l2_dv_timings *argp ) - :name: VIDIOC_SUBDEV_S_DV_TIMINGS +.. c:macro:: VIDIOC_SUBDEV_S_DV_TIMINGS +``int ioctl(int fd, VIDIOC_SUBDEV_S_DV_TIMINGS, struct v4l2_dv_timings *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_dv_timings`. - Description =========== @@ -67,7 +62,6 @@ the current input or output does not support DV timings (e.g. if :ref:`VIDIOC_ENUMINPUT` does not set the ``V4L2_IN_CAP_DV_TIMINGS`` flag), then ``ENODATA`` error code is returned. - Return Value ============ @@ -177,7 +171,6 @@ EPERM - Reserved for future extensions. Drivers and applications must set the array to zero. - .. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{7.0cm}|p{3.5cm}| .. c:type:: v4l2_dv_timings diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst b/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst index 0620f4cbbcbd..39d523a449a7 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_EDID: @@ -18,34 +12,34 @@ Name VIDIOC_G_EDID - VIDIOC_S_EDID - VIDIOC_SUBDEV_G_EDID - VIDIOC_SUBDEV_S_EDID - Get or set the EDID of a video receiver/transmitter - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_EDID, struct v4l2_edid *argp ) - :name: VIDIOC_G_EDID +.. c:macro:: VIDIOC_G_EDID + +``int ioctl(int fd, VIDIOC_G_EDID, struct v4l2_edid *argp)`` + +.. c:macro:: VIDIOC_S_EDID -.. c:function:: int ioctl( int fd, VIDIOC_S_EDID, struct v4l2_edid *argp ) - :name: VIDIOC_S_EDID +``int ioctl(int fd, VIDIOC_S_EDID, struct v4l2_edid *argp)`` +.. c:macro:: VIDIOC_SUBDEV_G_EDID -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_EDID, struct v4l2_edid *argp ) - :name: VIDIOC_SUBDEV_G_EDID +``int ioctl(int fd, VIDIOC_SUBDEV_G_EDID, struct v4l2_edid *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_EDID, struct v4l2_edid *argp ) - :name: VIDIOC_SUBDEV_S_EDID +.. c:macro:: VIDIOC_SUBDEV_S_EDID +``int ioctl(int fd, VIDIOC_SUBDEV_S_EDID, struct v4l2_edid *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_edid`. - Description =========== @@ -104,7 +98,6 @@ this will drive the hotplug pin low and/or block the source from reading the EDID data in some way. In any case, the end result is the same: the EDID is no longer available. - .. c:type:: v4l2_edid .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -139,7 +132,6 @@ EDID is no longer available. - Pointer to memory that contains the EDID. The minimum size is ``blocks`` * 128. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst b/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst index 8aad30a7c6c3..7698e65ccccf 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_ENC_INDEX: @@ -18,24 +12,22 @@ Name VIDIOC_G_ENC_INDEX - Get meta data about a compressed video stream - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_ENC_INDEX, struct v4l2_enc_idx *argp ) - :name: VIDIOC_G_ENC_INDEX +.. c:macro:: VIDIOC_G_ENC_INDEX +``int ioctl(int fd, VIDIOC_G_ENC_INDEX, struct v4l2_enc_idx *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_enc_idx`. - Description =========== @@ -62,7 +54,6 @@ will be zero. Currently this ioctl is only defined for MPEG-2 program streams and video elementary streams. - .. tabularcolumns:: |p{3.8cm}|p{5.6cm}|p{8.1cm}| .. c:type:: v4l2_enc_idx @@ -90,7 +81,6 @@ video elementary streams. their ``offset``. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_enc_idx_entry @@ -123,7 +113,6 @@ video elementary streams. - Reserved for future extensions. Drivers must set the array to zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _enc-idx-flags: @@ -147,7 +136,6 @@ video elementary streams. - *AND* the flags field with this mask to obtain the picture coding type. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst index add17c9204cb..f2173e310d67 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_EXT_CTRLS: @@ -18,32 +12,30 @@ Name VIDIOC_G_EXT_CTRLS - VIDIOC_S_EXT_CTRLS - VIDIOC_TRY_EXT_CTRLS - Get or set the value of several controls, try control values - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_EXT_CTRLS, struct v4l2_ext_controls *argp ) - :name: VIDIOC_G_EXT_CTRLS +.. c:macro:: VIDIOC_G_EXT_CTRLS +``int ioctl(int fd, VIDIOC_G_EXT_CTRLS, struct v4l2_ext_controls *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_EXT_CTRLS, struct v4l2_ext_controls *argp ) - :name: VIDIOC_S_EXT_CTRLS +.. c:macro:: VIDIOC_S_EXT_CTRLS +``int ioctl(int fd, VIDIOC_S_EXT_CTRLS, struct v4l2_ext_controls *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_TRY_EXT_CTRLS, struct v4l2_ext_controls *argp ) - :name: VIDIOC_TRY_EXT_CTRLS +.. c:macro:: VIDIOC_TRY_EXT_CTRLS +``int ioctl(int fd, VIDIOC_TRY_EXT_CTRLS, struct v4l2_ext_controls *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_ext_controls`. - Description =========== @@ -126,7 +118,6 @@ correct. This prevents the situation where only some of the controls were set/get. Only low-level errors (e. g. a failed i2c command) can still cause this situation. - .. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{1.5cm}|p{11.8cm}| .. c:type:: v4l2_ext_control @@ -202,7 +193,6 @@ still cause this situation. * - } - - .. tabularcolumns:: |p{4.0cm}|p{2.2cm}|p{2.1cm}|p{8.2cm}| .. c:type:: v4l2_ext_controls @@ -316,7 +306,6 @@ still cause this situation. Ignored if ``count`` equals zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _ctrl-class: @@ -370,7 +359,6 @@ still cause this situation. - The class containing RF tuner controls. These controls are described in :ref:`rf-tuner-controls`. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst b/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst index 0124444419ae..dc1f16343b22 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_FBUF: @@ -18,27 +12,26 @@ Name VIDIOC_G_FBUF - VIDIOC_S_FBUF - Get or set frame buffer overlay parameters - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_FBUF, struct v4l2_framebuffer *argp ) - :name: VIDIOC_G_FBUF +.. c:macro:: VIDIOC_G_FBUF + +``int ioctl(int fd, VIDIOC_G_FBUF, struct v4l2_framebuffer *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_FBUF, const struct v4l2_framebuffer *argp ) - :name: VIDIOC_S_FBUF +.. c:macro:: VIDIOC_S_FBUF +``int ioctl(int fd, VIDIOC_S_FBUF, const struct v4l2_framebuffer *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_framebuffer`. - Description =========== @@ -82,7 +75,6 @@ jeopardize the system security, its stability or even damage the hardware, therefore only the superuser can set the parameters for a destructive video overlay. - .. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}| .. c:type:: v4l2_framebuffer @@ -215,7 +207,6 @@ destructive video overlay. - ``priv`` - Reserved. Drivers and applications must set this field to zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _framebuffer-cap: @@ -264,7 +255,6 @@ destructive video overlay. chroma-key colors are replaced by framebuffer pixels, which is exactly opposite of ``V4L2_FBUF_CAP_CHROMAKEY`` - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _framebuffer-flags: @@ -339,7 +329,6 @@ destructive video overlay. other, so same ``chromakey`` field of struct :c:type:`v4l2_window` is being used. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst index 88bb69ec07e2..7e9f8475ea63 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_FMT: @@ -18,29 +12,30 @@ Name VIDIOC_G_FMT - VIDIOC_S_FMT - VIDIOC_TRY_FMT - Get or set the data format, try a format - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_FMT, struct v4l2_format *argp ) - :name: VIDIOC_G_FMT +.. c:macro:: VIDIOC_G_FMT + +``int ioctl(int fd, VIDIOC_G_FMT, struct v4l2_format *argp)`` + +.. c:macro:: VIDIOC_S_FMT + +``int ioctl(int fd, VIDIOC_S_FMT, struct v4l2_format *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_FMT, struct v4l2_format *argp ) - :name: VIDIOC_S_FMT +.. c:macro:: VIDIOC_TRY_FMT -.. c:function:: int ioctl( int fd, VIDIOC_TRY_FMT, struct v4l2_format *argp ) - :name: VIDIOC_TRY_FMT +``int ioctl(int fd, VIDIOC_TRY_FMT, struct v4l2_format *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_format`. - Description =========== @@ -92,7 +87,6 @@ recommended drivers are not required to implement this ioctl. The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical to what :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` returns for the same input or output. - .. c:type:: v4l2_format .. tabularcolumns:: |p{1.2cm}|p{4.6cm}|p{3.0cm}|p{8.6cm}| @@ -142,7 +136,6 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical * - } - - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst b/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst index 26300e0258a3..5445a4a442e4 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_FREQUENCY: @@ -18,27 +12,26 @@ Name VIDIOC_G_FREQUENCY - VIDIOC_S_FREQUENCY - Get or set tuner or modulator radio frequency - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_FREQUENCY, struct v4l2_frequency *argp ) - :name: VIDIOC_G_FREQUENCY +.. c:macro:: VIDIOC_G_FREQUENCY + +``int ioctl(int fd, VIDIOC_G_FREQUENCY, struct v4l2_frequency *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_FREQUENCY, const struct v4l2_frequency *argp ) - :name: VIDIOC_S_FREQUENCY +.. c:macro:: VIDIOC_S_FREQUENCY +``int ioctl(int fd, VIDIOC_S_FREQUENCY, const struct v4l2_frequency *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_frequency`. - Description =========== @@ -58,7 +51,6 @@ structure. When the requested frequency is not possible the driver assumes the closest possible value. However :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` is a write-only ioctl, it does not return the actual new frequency. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_frequency @@ -96,7 +88,6 @@ write-only ioctl, it does not return the actual new frequency. - Reserved for future extensions. Drivers and applications must set the array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-input.rst b/Documentation/userspace-api/media/v4l/vidioc-g-input.rst index 294e346678c1..eee9ce51c797 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-input.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-input.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_INPUT: @@ -18,27 +12,26 @@ Name VIDIOC_G_INPUT - VIDIOC_S_INPUT - Query or select the current video input - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_INPUT, int *argp ) - :name: VIDIOC_G_INPUT +.. c:macro:: VIDIOC_G_INPUT + +``int ioctl(int fd, VIDIOC_G_INPUT, int *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_INPUT, int *argp ) - :name: VIDIOC_S_INPUT +.. c:macro:: VIDIOC_S_INPUT +``int ioctl(int fd, VIDIOC_S_INPUT, int *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer an integer with input index. - Description =========== @@ -59,7 +52,6 @@ other parameters. Information about video inputs is available using the :ref:`VIDIOC_ENUMINPUT` ioctl. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst b/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst index 3b9981dcb8e0..93ed111dfcb9 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_JPEGCOMP: @@ -18,27 +12,26 @@ Name VIDIOC_G_JPEGCOMP - VIDIOC_S_JPEGCOMP - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_JPEGCOMP, v4l2_jpegcompression *argp ) - :name: VIDIOC_G_JPEGCOMP +.. c:macro:: VIDIOC_G_JPEGCOMP + +``int ioctl(int fd, VIDIOC_G_JPEGCOMP, v4l2_jpegcompression *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_JPEGCOMP, const v4l2_jpegcompression *argp ) - :name: VIDIOC_S_JPEGCOMP +.. c:macro:: VIDIOC_S_JPEGCOMP +``int ioctl(int fd, VIDIOC_S_JPEGCOMP, const v4l2_jpegcompression *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_jpegcompression`. - Description =========== @@ -61,7 +54,6 @@ stored in the JPEG-encoded fields. These define how the JPEG field is encoded. If you omit them, applications assume you've used standard encoding. You usually do want to add them. - .. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}| .. c:type:: v4l2_jpegcompression @@ -99,7 +91,6 @@ encoding. You usually do want to add them. control is exposed by a driver applications should use it instead and ignore this field. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _jpeg-markers: @@ -125,7 +116,6 @@ encoding. You usually do want to add them. - (1<<7) - App segment, driver will always use APP0 - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst b/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst index c2072f6e8756..2ac2473e341b 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_MODULATOR: @@ -18,27 +12,26 @@ Name VIDIOC_G_MODULATOR - VIDIOC_S_MODULATOR - Get or set modulator attributes - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_MODULATOR, struct v4l2_modulator *argp ) - :name: VIDIOC_G_MODULATOR +.. c:macro:: VIDIOC_G_MODULATOR + +``int ioctl(int fd, VIDIOC_G_MODULATOR, struct v4l2_modulator *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_MODULATOR, const struct v4l2_modulator *argp ) - :name: VIDIOC_S_MODULATOR +.. c:macro:: VIDIOC_S_MODULATOR +``int ioctl(int fd, VIDIOC_S_MODULATOR, const struct v4l2_modulator *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_modulator`. - Description =========== @@ -67,7 +60,6 @@ context. To change the radio frequency the :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available. - .. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}| .. c:type:: v4l2_modulator @@ -128,7 +120,6 @@ To change the radio frequency the Drivers and applications must set the array to zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _modulator-txsubchans: @@ -189,7 +180,6 @@ To change the radio frequency the - 0x0010 - Enable the RDS encoder for a radio FM transmitter. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-output.rst b/Documentation/userspace-api/media/v4l/vidioc-g-output.rst index cad477420fd7..3138c4cc8fe3 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-output.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-output.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_OUTPUT: @@ -18,27 +12,26 @@ Name VIDIOC_G_OUTPUT - VIDIOC_S_OUTPUT - Query or select the current video output - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_OUTPUT, int *argp ) - :name: VIDIOC_G_OUTPUT +.. c:macro:: VIDIOC_G_OUTPUT + +``int ioctl(int fd, VIDIOC_G_OUTPUT, int *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_OUTPUT, int *argp ) - :name: VIDIOC_S_OUTPUT +.. c:macro:: VIDIOC_S_OUTPUT +``int ioctl(int fd, VIDIOC_S_OUTPUT, int *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to an integer with output index. - Description =========== @@ -60,7 +53,6 @@ negotiating any other parameters. Information about video outputs is available using the :ref:`VIDIOC_ENUMOUTPUT` ioctl. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst b/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst index 59e02aca164c..724f7fa7bae1 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_PARM: @@ -18,27 +12,26 @@ Name VIDIOC_G_PARM - VIDIOC_S_PARM - Get or set streaming parameters - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_PARM, v4l2_streamparm *argp ) - :name: VIDIOC_G_PARM +.. c:macro:: VIDIOC_G_PARM + +``int ioctl(int fd, VIDIOC_G_PARM, v4l2_streamparm *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_PARM, v4l2_streamparm *argp ) - :name: VIDIOC_S_PARM +.. c:macro:: VIDIOC_S_PARM +``int ioctl(int fd, VIDIOC_S_PARM, v4l2_streamparm *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_streamparm`. - Description =========== @@ -55,7 +48,7 @@ format, on the other hand, may change the frame interval. Further these ioctls can be used to determine the number of buffers used internally by a driver in read/write mode. For implications see the -section discussing the :ref:`read() <func-read>` function. +section discussing the :c:func:`read()` function. To get and set the streaming parameters applications call the :ref:`VIDIOC_G_PARM <VIDIOC_G_PARM>` and @@ -63,7 +56,6 @@ To get and set the streaming parameters applications call the pointer to a struct :c:type:`v4l2_streamparm` which contains a union holding separate parameters for input and output devices. - .. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}| .. c:type:: v4l2_streamparm @@ -96,7 +88,6 @@ union holding separate parameters for input and output devices. - - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_captureparm @@ -145,7 +136,7 @@ union holding separate parameters for input and output devices. * - __u32 - ``readbuffers`` - Applications set this field to the desired number of buffers used - internally by the driver in :ref:`read() <func-read>` mode. + internally by the driver in :c:func:`read()` mode. Drivers return the actual number of buffers. When an application requests zero buffers, drivers should just return the current setting rather than the minimum or an error code. For details see @@ -156,7 +147,6 @@ union holding separate parameters for input and output devices. the array to zero. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_outputparm @@ -179,7 +169,7 @@ union holding separate parameters for input and output devices. * - :cspan:`2` The field is intended to repeat frames on the driver side in - :ref:`write() <func-write>` mode (in streaming mode timestamps + :c:func:`write()` mode (in streaming mode timestamps can be used to throttle the output), saving I/O bandwidth. For stateful encoders (see :ref:`encoder`) this represents the @@ -206,7 +196,7 @@ union holding separate parameters for input and output devices. * - __u32 - ``writebuffers`` - Applications set this field to the desired number of buffers used - internally by the driver in :ref:`write() <func-write>` mode. Drivers + internally by the driver in :c:func:`write()` mode. Drivers return the actual number of buffers. When an application requests zero buffers, drivers should just return the current setting rather than the minimum or an error code. For details see @@ -217,7 +207,6 @@ union holding separate parameters for input and output devices. the array to zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _parm-caps: @@ -233,7 +222,6 @@ union holding separate parameters for input and output devices. field. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _parm-flags: @@ -272,8 +260,7 @@ union holding separate parameters for input and output devices. - Moving objects in the image might have excessive motion blur. - - Capture might only work through the :ref:`read() <func-read>` call. - + - Capture might only work through the :c:func:`read()` call. Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst b/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst index c8add130c7a4..d72a0c716fca 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_PRIORITY: @@ -18,27 +12,26 @@ Name VIDIOC_G_PRIORITY - VIDIOC_S_PRIORITY - Query or request the access priority associated with a file descriptor - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_PRIORITY, enum v4l2_priority *argp ) - :name: VIDIOC_G_PRIORITY +.. c:macro:: VIDIOC_G_PRIORITY + +``int ioctl(int fd, VIDIOC_G_PRIORITY, enum v4l2_priority *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_PRIORITY, const enum v4l2_priority *argp ) - :name: VIDIOC_S_PRIORITY +.. c:macro:: VIDIOC_S_PRIORITY +``int ioctl(int fd, VIDIOC_S_PRIORITY, const enum v4l2_priority *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to an enum :c:type:`v4l2_priority` type. - Description =========== @@ -50,7 +43,6 @@ To request an access priority applications store the desired priority in an enum v4l2_priority variable and call :ref:`VIDIOC_S_PRIORITY <VIDIOC_G_PRIORITY>` ioctl with a pointer to this variable. - .. c:type:: v4l2_priority .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| @@ -85,7 +77,6 @@ with a pointer to this variable. it blocks any other fd from changing device properties. Usually applications which must not be interrupted, like video recording. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst b/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst index faab0454b1e4..9a9e589cce77 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_SELECTION: @@ -18,23 +12,22 @@ Name VIDIOC_G_SELECTION - VIDIOC_S_SELECTION - Get or set one of the selection rectangles - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_SELECTION, struct v4l2_selection *argp ) - :name: VIDIOC_G_SELECTION +.. c:macro:: VIDIOC_G_SELECTION +``int ioctl(int fd, VIDIOC_G_SELECTION, struct v4l2_selection *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_SELECTION, struct v4l2_selection *argp ) - :name: VIDIOC_S_SELECTION +.. c:macro:: VIDIOC_S_SELECTION +``int ioctl(int fd, VIDIOC_S_SELECTION, struct v4l2_selection *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_selection`. @@ -122,7 +115,6 @@ constraints. Selection targets and flags are documented in :ref:`v4l2-selections-common`. - .. _sel-const-adjust: .. kernel-figure:: constraints.svg @@ -135,7 +127,6 @@ Selection targets and flags are documented in - .. c:type:: v4l2_selection .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -175,7 +166,6 @@ Selection targets and flags are documented in Starting with kernel 4.13 both variations are allowed. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst b/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst index 7a62c4f4e37f..752f7f5fae73 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_SLICED_VBI_CAP: @@ -18,24 +12,22 @@ Name VIDIOC_G_SLICED_VBI_CAP - Query sliced VBI capabilities - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_SLICED_VBI_CAP, struct v4l2_sliced_vbi_cap *argp ) - :name: VIDIOC_G_SLICED_VBI_CAP +.. c:macro:: VIDIOC_G_SLICED_VBI_CAP +``int ioctl(int fd, VIDIOC_G_SLICED_VBI_CAP, struct v4l2_sliced_vbi_cap *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_sliced_vbi_cap`. - Description =========== @@ -51,7 +43,6 @@ the sliced VBI API is unsupported or ``type`` is invalid. The ``type`` field was added, and the ioctl changed from read-only to write-read, in Linux 2.6.19. - .. c:type:: v4l2_sliced_vbi_cap .. tabularcolumns:: |p{1.2cm}|p{4.2cm}|p{4.1cm}|p{4.0cm}|p{4.0cm}| @@ -127,7 +118,6 @@ the sliced VBI API is unsupported or ``type`` is invalid. See also :ref:`vbi-525` and :ref:`vbi-625`. - .. raw:: latex \scriptsize @@ -190,7 +180,6 @@ the sliced VBI API is unsupported or ``type`` is invalid. \normalsize - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-std.rst b/Documentation/userspace-api/media/v4l/vidioc-g-std.rst index 6d8cb7f29ac6..da91fe07d9e0 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-std.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-std.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_STD: @@ -18,33 +12,34 @@ Name VIDIOC_G_STD - VIDIOC_S_STD - VIDIOC_SUBDEV_G_STD - VIDIOC_SUBDEV_S_STD - Query or select the video standard of the current input - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_STD, v4l2_std_id *argp ) - :name: VIDIOC_G_STD +.. c:macro:: VIDIOC_G_STD + +``int ioctl(int fd, VIDIOC_G_STD, v4l2_std_id *argp)`` + +.. c:macro:: VIDIOC_S_STD -.. c:function:: int ioctl( int fd, VIDIOC_S_STD, const v4l2_std_id *argp ) - :name: VIDIOC_S_STD +``int ioctl(int fd, VIDIOC_S_STD, const v4l2_std_id *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_STD, v4l2_std_id *argp ) - :name: VIDIOC_SUBDEV_G_STD +.. c:macro:: VIDIOC_SUBDEV_G_STD -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_STD, const v4l2_std_id *argp ) - :name: VIDIOC_SUBDEV_S_STD +``int ioctl(int fd, VIDIOC_SUBDEV_G_STD, v4l2_std_id *argp)`` +.. c:macro:: VIDIOC_SUBDEV_S_STD + +``int ioctl(int fd, VIDIOC_SUBDEV_S_STD, const v4l2_std_id *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to :c:type:`v4l2_std_id`. - Description =========== diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst b/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst index 40bff6f0a88d..116e66c01556 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_G_TUNER: @@ -18,27 +12,26 @@ Name VIDIOC_G_TUNER - VIDIOC_S_TUNER - Get or set tuner attributes - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_G_TUNER, struct v4l2_tuner *argp ) - :name: VIDIOC_G_TUNER +.. c:macro:: VIDIOC_G_TUNER + +``int ioctl(int fd, VIDIOC_G_TUNER, struct v4l2_tuner *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_S_TUNER, const struct v4l2_tuner *argp ) - :name: VIDIOC_S_TUNER +.. c:macro:: VIDIOC_S_TUNER +``int ioctl(int fd, VIDIOC_S_TUNER, const struct v4l2_tuner *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_tuner`. - Description =========== @@ -66,7 +59,6 @@ to zero. The term 'tuner' means SDR receiver in this context. To change the radio frequency the :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available. - .. tabularcolumns:: |p{1.3cm}|p{3.0cm}|p{6.6cm}|p{6.6cm}| .. c:type:: v4l2_tuner @@ -190,7 +182,6 @@ To change the radio frequency the Drivers and applications must set the array to zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. c:type:: v4l2_tuner_type @@ -214,7 +205,6 @@ To change the radio frequency the - 5 - Tuner controls the RF part of a Software Digital Radio (SDR) - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _tuner-capability: @@ -306,7 +296,6 @@ To change the radio frequency the instead of 62.5 kHz. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _tuner-rxsubchans: @@ -345,7 +334,6 @@ To change the radio frequency the - The tuner receives an RDS channel. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _tuner-audmode: diff --git a/Documentation/userspace-api/media/v4l/vidioc-log-status.rst b/Documentation/userspace-api/media/v4l/vidioc-log-status.rst index 64c06fa72b9c..c218747be762 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-log-status.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-log-status.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_LOG_STATUS: @@ -18,20 +12,18 @@ Name VIDIOC_LOG_STATUS - Log driver status information - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_LOG_STATUS) - :name: VIDIOC_LOG_STATUS +.. c:macro:: VIDIOC_LOG_STATUS +``int ioctl(int fd, VIDIOC_LOG_STATUS)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. - + File descriptor returned by :c:func:`open()`. Description =========== @@ -47,7 +39,6 @@ Mismatches may give an indication where the problem is. This ioctl is optional and not all drivers support it. It was introduced in Linux 2.6.15. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-overlay.rst b/Documentation/userspace-api/media/v4l/vidioc-overlay.rst index 74310ff486ba..f2efaaba24c0 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-overlay.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-overlay.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_OVERLAY: @@ -18,24 +12,22 @@ Name VIDIOC_OVERLAY - Start or stop video overlay - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_OVERLAY, const int *argp ) - :name: VIDIOC_OVERLAY +.. c:macro:: VIDIOC_OVERLAY +``int ioctl(int fd, VIDIOC_OVERLAY, const int *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to an integer. - Description =========== @@ -48,7 +40,6 @@ Drivers do not support :ref:`VIDIOC_STREAMON` or :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` with ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-prepare-buf.rst b/Documentation/userspace-api/media/v4l/vidioc-prepare-buf.rst index b6c09d5b128f..45bb1eab2c2d 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-prepare-buf.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-prepare-buf.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_PREPARE_BUF: @@ -18,24 +12,22 @@ Name VIDIOC_PREPARE_BUF - Prepare a buffer for I/O - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_PREPARE_BUF, struct v4l2_buffer *argp ) - :name: VIDIOC_PREPARE_BUF +.. c:macro:: VIDIOC_PREPARE_BUF +``int ioctl(int fd, VIDIOC_PREPARE_BUF, struct v4l2_buffer *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_buffer`. - Description =========== @@ -48,7 +40,6 @@ in advance saves time during the actual I/O. The struct :c:type:`v4l2_buffer` structure is specified in :ref:`buffer`. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-qbuf.rst b/Documentation/userspace-api/media/v4l/vidioc-qbuf.rst index ec0a54fbeb43..fbf8c5962d8a 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-qbuf.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-qbuf.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_QBUF: @@ -18,27 +12,26 @@ Name VIDIOC_QBUF - VIDIOC_DQBUF - Exchange a buffer with the driver - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_QBUF, struct v4l2_buffer *argp ) - :name: VIDIOC_QBUF +.. c:macro:: VIDIOC_QBUF + +``int ioctl(int fd, VIDIOC_QBUF, struct v4l2_buffer *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_DQBUF, struct v4l2_buffer *argp ) - :name: VIDIOC_DQBUF +.. c:macro:: VIDIOC_DQBUF +``int ioctl(int fd, VIDIOC_DQBUF, struct v4l2_buffer *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_buffer`. - Description =========== @@ -149,13 +142,12 @@ API is used the ``m.fd`` fields of the passed array of struct By default ``VIDIOC_DQBUF`` blocks when no buffer is in the outgoing queue. When the ``O_NONBLOCK`` flag was given to the -:ref:`open() <func-open>` function, ``VIDIOC_DQBUF`` returns +:c:func:`open()` function, ``VIDIOC_DQBUF`` returns immediately with an ``EAGAIN`` error code when no buffer is available. The struct :c:type:`v4l2_buffer` structure is specified in :ref:`buffer`. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-query-dv-timings.rst b/Documentation/userspace-api/media/v4l/vidioc-query-dv-timings.rst index ab86408446f3..5afdc4b4dc2d 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-query-dv-timings.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-query-dv-timings.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_QUERY_DV_TIMINGS: @@ -18,27 +12,26 @@ Name VIDIOC_QUERY_DV_TIMINGS - VIDIOC_SUBDEV_QUERY_DV_TIMINGS - Sense the DV preset received by the current input - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_QUERY_DV_TIMINGS, struct v4l2_dv_timings *argp ) - :name: VIDIOC_QUERY_DV_TIMINGS +.. c:macro:: VIDIOC_QUERY_DV_TIMINGS + +``int ioctl(int fd, VIDIOC_QUERY_DV_TIMINGS, struct v4l2_dv_timings *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_QUERY_DV_TIMINGS, struct v4l2_dv_timings *argp ) - :name: VIDIOC_SUBDEV_QUERY_DV_TIMINGS +.. c:macro:: VIDIOC_SUBDEV_QUERY_DV_TIMINGS +``int ioctl(int fd, VIDIOC_SUBDEV_QUERY_DV_TIMINGS, struct v4l2_dv_timings *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_dv_timings`. - Description =========== @@ -72,7 +65,6 @@ and returns ``ERANGE``. In that case the application can call found timings with the hardware's capabilities in order to give more precise feedback to the user. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-querybuf.rst b/Documentation/userspace-api/media/v4l/vidioc-querybuf.rst index 646f91140ccf..6c615e893866 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-querybuf.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-querybuf.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_QUERYBUF: @@ -18,24 +12,22 @@ Name VIDIOC_QUERYBUF - Query the status of a buffer - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_QUERYBUF, struct v4l2_buffer *argp ) - :name: VIDIOC_QUERYBUF +.. c:macro:: VIDIOC_QUERYBUF +``int ioctl(int fd, VIDIOC_QUERYBUF, struct v4l2_buffer *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_buffer`. - Description =========== @@ -74,7 +66,6 @@ flags, they are meaningless in this context. The struct :c:type:`v4l2_buffer` structure is specified in :ref:`buffer`. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst index 90347367ef06..b512b1fbf9a3 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_QUERYCAP: @@ -18,24 +12,22 @@ Name VIDIOC_QUERYCAP - Query device capabilities - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_QUERYCAP, struct v4l2_capability *argp ) - :name: VIDIOC_QUERYCAP +.. c:macro:: VIDIOC_QUERYCAP +``int ioctl(int fd, VIDIOC_QUERYCAP, struct v4l2_capability *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_capability`. - Description =========== @@ -46,7 +38,6 @@ pointer to a struct :c:type:`v4l2_capability` which is filled by the driver. When the driver is not compatible with this specification the ioctl returns an ``EINVAL`` error code. - .. tabularcolumns:: |p{1.5cm}|p{2.5cm}|p{13cm}| .. c:type:: v4l2_capability @@ -139,7 +130,6 @@ specification the ioctl returns an ``EINVAL`` error code. zero. - .. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}| .. _device-capabilities: @@ -250,8 +240,8 @@ specification the ioctl returns an ``EINVAL`` error code. - The device supports the :ref:`metadata` capture interface. * - ``V4L2_CAP_READWRITE`` - 0x01000000 - - The device supports the :ref:`read() <rw>` and/or - :ref:`write() <rw>` I/O methods. + - The device supports the :c:func:`read()` and/or + :c:func:`write()` I/O methods. * - ``V4L2_CAP_ASYNCIO`` - 0x02000000 - The device supports the :ref:`asynchronous <async>` I/O methods. @@ -276,7 +266,6 @@ specification the ioctl returns an ``EINVAL`` error code. only appear in the ``capabilities`` field and never in the ``device_caps`` field. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst index fbb0038d86bf..9b8716f90f12 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_QUERYCTRL: @@ -18,31 +12,29 @@ Name VIDIOC_QUERYCTRL - VIDIOC_QUERY_EXT_CTRL - VIDIOC_QUERYMENU - Enumerate controls and menu control items - Synopsis ======== -.. c:function:: int ioctl( int fd, int VIDIOC_QUERYCTRL, struct v4l2_queryctrl *argp ) - :name: VIDIOC_QUERYCTRL +``int ioctl(int fd, int VIDIOC_QUERYCTRL, struct v4l2_queryctrl *argp)`` + +.. c:macro:: VIDIOC_QUERY_EXT_CTRL -.. c:function:: int ioctl( int fd, VIDIOC_QUERY_EXT_CTRL, struct v4l2_query_ext_ctrl *argp ) - :name: VIDIOC_QUERY_EXT_CTRL +``int ioctl(int fd, VIDIOC_QUERY_EXT_CTRL, struct v4l2_query_ext_ctrl *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_QUERYMENU, struct v4l2_querymenu *argp ) - :name: VIDIOC_QUERYMENU +.. c:macro:: VIDIOC_QUERYMENU +``int ioctl(int fd, VIDIOC_QUERYMENU, struct v4l2_querymenu *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_queryctrl`, :c:type:`v4l2_query_ext_ctrl` or :c:type:`v4l2_querymenu` (depending on the ioctl). - Description =========== @@ -102,7 +94,6 @@ inclusive. See also the examples in :ref:`control`. - .. tabularcolumns:: |p{1.2cm}|p{3.6cm}|p{12.7cm}| .. _v4l2-queryctrl: @@ -181,7 +172,6 @@ See also the examples in :ref:`control`. zero. - .. tabularcolumns:: |p{1.2cm}|p{5.0cm}|p{11.3cm}| .. _v4l2-query-ext-ctrl: @@ -282,7 +272,6 @@ See also the examples in :ref:`control`. the array to zero. - .. tabularcolumns:: |p{1.2cm}|p{1.0cm}|p{1.7cm}|p{13.0cm}| .. _v4l2-querymenu: @@ -318,7 +307,6 @@ See also the examples in :ref:`control`. zero. - .. tabularcolumns:: |p{5.8cm}|p{1.4cm}|p{1.0cm}|p{1.4cm}|p{6.9cm}| .. c:type:: v4l2_ctrl_type @@ -589,7 +577,6 @@ See also the examples in :ref:`control`. streaming is in progress since most drivers do not support changing the format in that case. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-querystd.rst b/Documentation/userspace-api/media/v4l/vidioc-querystd.rst index 899f0ef6eefe..4a88287d8f61 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-querystd.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-querystd.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_QUERYSTD: @@ -18,27 +12,26 @@ Name VIDIOC_QUERYSTD - VIDIOC_SUBDEV_QUERYSTD - Sense the video standard received by the current input - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_QUERYSTD, v4l2_std_id *argp ) - :name: VIDIOC_QUERYSTD +.. c:macro:: VIDIOC_QUERYSTD + +``int ioctl(int fd, VIDIOC_QUERYSTD, v4l2_std_id *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_QUERYSTD, v4l2_std_id *argp ) - :name: VIDIOC_SUBDEV_QUERYSTD +.. c:macro:: VIDIOC_SUBDEV_QUERYSTD +``int ioctl(int fd, VIDIOC_SUBDEV_QUERYSTD, v4l2_std_id *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to :c:type:`v4l2_std_id`. - Description =========== @@ -65,7 +58,6 @@ or output. standard is valid they will have to stop streaming, set the new standard, allocate new buffers and start streaming again. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst index 75d894d9c36c..c1c88e00b106 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_REQBUFS: @@ -18,19 +12,18 @@ Name VIDIOC_REQBUFS - Initiate Memory Mapping, User Pointer I/O or DMA buffer I/O - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_REQBUFS, struct v4l2_requestbuffers *argp ) - :name: VIDIOC_REQBUFS +.. c:macro:: VIDIOC_REQBUFS +``int ioctl(int fd, VIDIOC_REQBUFS, struct v4l2_requestbuffers *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_requestbuffers`. @@ -76,7 +69,6 @@ fds are closed. A ``count`` value of zero frees or orphans all buffers, after aborting or finishing any DMA in progress, an implicit :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`. - .. c:type:: v4l2_requestbuffers .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -112,17 +104,10 @@ aborting or finishing any DMA in progress, an implicit ``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will free any previously allocated buffers, so this is typically something that will be done at the start of the application. - * - union { - - (anonymous) - * - __u32 - - ``flags`` - - Specifies additional buffer management attributes. - See :ref:`memory-flags`. * - __u32 - ``reserved``\ [1] - - Kept for backwards compatibility. Use ``flags`` instead. - * - } - - + - A place holder for future extensions. Drivers and applications + must set the array to zero. .. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}| @@ -169,11 +154,9 @@ aborting or finishing any DMA in progress, an implicit - This capability is set by the driver to indicate that the queue supports cache and memory management hints. However, it's only valid when the queue is used for :ref:`memory mapping <mmap>` streaming I/O. See - :ref:`V4L2_FLAG_MEMORY_NON_CONSISTENT <V4L2-FLAG-MEMORY-NON-CONSISTENT>`, :ref:`V4L2_BUF_FLAG_NO_CACHE_INVALIDATE <V4L2-BUF-FLAG-NO-CACHE-INVALIDATE>` and :ref:`V4L2_BUF_FLAG_NO_CACHE_CLEAN <V4L2-BUF-FLAG-NO-CACHE-CLEAN>`. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst b/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst index 4c16e7e89cfa..1948f31c2dbc 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_S_HW_FREQ_SEEK: @@ -18,24 +12,22 @@ Name VIDIOC_S_HW_FREQ_SEEK - Perform a hardware frequency seek - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_S_HW_FREQ_SEEK, struct v4l2_hw_freq_seek *argp ) - :name: VIDIOC_S_HW_FREQ_SEEK +.. c:macro:: VIDIOC_S_HW_FREQ_SEEK +``int ioctl(int fd, VIDIOC_S_HW_FREQ_SEEK, struct v4l2_hw_freq_seek *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_hw_freq_seek`. - Description =========== @@ -66,7 +58,6 @@ set. If this ioctl is called from a non-blocking filehandle, then ``EAGAIN`` error code is returned and no seek takes place. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_hw_freq_seek @@ -123,7 +114,6 @@ error code is returned and no seek takes place. - Reserved for future extensions. Applications must set the array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-streamon.rst b/Documentation/userspace-api/media/v4l/vidioc-streamon.rst index 13e0136d5c25..0bc86f06947b 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-streamon.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-streamon.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_STREAMON: @@ -18,22 +12,22 @@ Name VIDIOC_STREAMON - VIDIOC_STREAMOFF - Start or stop streaming I/O - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_STREAMON, const int *argp ) - :name: VIDIOC_STREAMON +.. c:macro:: VIDIOC_STREAMON + +``int ioctl(int fd, VIDIOC_STREAMON, const int *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_STREAMOFF, const int *argp ) - :name: VIDIOC_STREAMOFF +.. c:macro:: VIDIOC_STREAMOFF +``int ioctl(int fd, VIDIOC_STREAMOFF, const int *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to an integer. @@ -91,7 +85,6 @@ state as mentioned above. no notion of starting or stopping "now". Buffer timestamps can be used to synchronize with other events. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst index 3527745935c7..17acf3fd8396 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL: @@ -18,24 +12,22 @@ Name VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL - Enumerate frame intervals - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL, struct v4l2_subdev_frame_interval_enum * argp ) - :name: VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL +.. c:macro:: VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL +``int ioctl(int fd, VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL, struct v4l2_subdev_frame_interval_enum * argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_subdev_frame_interval_enum`. - Description =========== @@ -104,7 +96,6 @@ multiple pads of the same sub-device is not defined. - Reserved for future extensions. Applications and drivers must set the array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst index eb7401991d02..8016fba7023f 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_SUBDEV_ENUM_FRAME_SIZE: @@ -18,24 +12,22 @@ Name VIDIOC_SUBDEV_ENUM_FRAME_SIZE - Enumerate media bus frame sizes - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_FRAME_SIZE, struct v4l2_subdev_frame_size_enum * argp ) - :name: VIDIOC_SUBDEV_ENUM_FRAME_SIZE +.. c:macro:: VIDIOC_SUBDEV_ENUM_FRAME_SIZE +``int ioctl(int fd, VIDIOC_SUBDEV_ENUM_FRAME_SIZE, struct v4l2_subdev_frame_size_enum * argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_subdev_frame_size_enum`. - Description =========== @@ -69,7 +61,6 @@ current values of V4L2 controls. See :ref:`VIDIOC_SUBDEV_G_FMT` for more information about try formats. - .. c:type:: v4l2_subdev_frame_size_enum .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -110,7 +101,6 @@ information about try formats. - Reserved for future extensions. Applications and drivers must set the array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst index 35b8607203a4..1fd950e34a0b 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_SUBDEV_ENUM_MBUS_CODE: @@ -18,24 +12,22 @@ Name VIDIOC_SUBDEV_ENUM_MBUS_CODE - Enumerate media bus formats - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_MBUS_CODE, struct v4l2_subdev_mbus_code_enum * argp ) - :name: VIDIOC_SUBDEV_ENUM_MBUS_CODE +.. c:macro:: VIDIOC_SUBDEV_ENUM_MBUS_CODE +``int ioctl(int fd, VIDIOC_SUBDEV_ENUM_MBUS_CODE, struct v4l2_subdev_mbus_code_enum * argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_subdev_mbus_code_enum`. - Description =========== @@ -54,7 +46,6 @@ other pads of the sub-device, as well as on the current active links. See :ref:`VIDIOC_SUBDEV_G_FMT` for more information about the try formats. - .. c:type:: v4l2_subdev_mbus_code_enum .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -79,11 +70,60 @@ information about the try formats. - Media bus format codes to be enumerated, from enum :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`. * - __u32 - - ``reserved``\ [8] + - ``flags`` + - See :ref:`v4l2-subdev-mbus-code-flags` + * - __u32 + - ``reserved``\ [7] - Reserved for future extensions. Applications and drivers must set the array to zero. + +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{7.7cm}| + +.. _v4l2-subdev-mbus-code-flags: + +.. flat-table:: Subdev Media Bus Code Enumerate Flags + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - V4L2_SUBDEV_MBUS_CODE_CSC_COLORSPACE + - 0x00000001 + - The driver allows the application to try to change the default colorspace + encoding. The application can ask to configure the colorspace of the + subdevice when calling the :ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` + ioctl with :ref:`V4L2_MBUS_FRAMEFMT_SET_CSC <mbus-framefmt-set-csc>` set. + See :ref:`v4l2-mbus-format` on how to do this. + * - V4L2_SUBDEV_MBUS_CODE_CSC_XFER_FUNC + - 0x00000002 + - The driver allows the application to try to change the default transform function. + The application can ask to configure the transform function of + the subdevice when calling the :ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` + ioctl with :ref:`V4L2_MBUS_FRAMEFMT_SET_CSC <mbus-framefmt-set-csc>` set. + See :ref:`v4l2-mbus-format` on how to do this. + * - V4L2_SUBDEV_MBUS_CODE_CSC_YCBCR_ENC + - 0x00000004 + - The driver allows the application to try to change the default Y'CbCr + encoding. The application can ask to configure the Y'CbCr encoding of the + subdevice when calling the :ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` + ioctl with :ref:`V4L2_MBUS_FRAMEFMT_SET_CSC <mbus-framefmt-set-csc>` set. + See :ref:`v4l2-mbus-format` on how to do this. + * - V4L2_SUBDEV_MBUS_CODE_CSC_HSV_ENC + - 0x00000004 + - The driver allows the application to try to change the default HSV + encoding. The application can ask to configure the HSV encoding of the + subdevice when calling the :ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` + ioctl with :ref:`V4L2_MBUS_FRAMEFMT_SET_CSC <mbus-framefmt-set-csc>` set. + See :ref:`v4l2-mbus-format` on how to do this. + * - V4L2_SUBDEV_MBUS_CODE_CSC_QUANTIZATION + - 0x00000008 + - The driver allows the application to try to change the default + quantization. The application can ask to configure the quantization of + the subdevice when calling the :ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` + ioctl with :ref:`V4L2_MBUS_FRAMEFMT_SET_CSC <mbus-framefmt-set-csc>` set. + See :ref:`v4l2-mbus-format` on how to do this. + Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst index 615e3efdf935..2d78b4f5928d 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_SUBDEV_G_CROP: @@ -18,27 +12,26 @@ Name VIDIOC_SUBDEV_G_CROP - VIDIOC_SUBDEV_S_CROP - Get or set the crop rectangle on a subdev pad - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_CROP, struct v4l2_subdev_crop *argp ) - :name: VIDIOC_SUBDEV_G_CROP +.. c:macro:: VIDIOC_SUBDEV_G_CROP + +``int ioctl(int fd, VIDIOC_SUBDEV_G_CROP, struct v4l2_subdev_crop *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_CROP, const struct v4l2_subdev_crop *argp ) - :name: VIDIOC_SUBDEV_S_CROP +.. c:macro:: VIDIOC_SUBDEV_S_CROP +``int ioctl(int fd, VIDIOC_SUBDEV_S_CROP, const struct v4l2_subdev_crop *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_subdev_crop`. - Description =========== @@ -83,7 +76,6 @@ rectangle doesn't match the device capabilities. They must instead modify the rectangle to match what the hardware can provide. The modified format should be as close as possible to the original request. - .. c:type:: v4l2_subdev_crop .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -108,7 +100,6 @@ modified format should be as close as possible to the original request. - Reserved for future extensions. Applications and drivers must set the array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst index 909ee9f90867..90b9bbfb61dd 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_SUBDEV_G_FMT: @@ -18,27 +12,26 @@ Name VIDIOC_SUBDEV_G_FMT - VIDIOC_SUBDEV_S_FMT - Get or set the data format on a subdev pad - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_FMT, struct v4l2_subdev_format *argp ) - :name: VIDIOC_SUBDEV_G_FMT +.. c:macro:: VIDIOC_SUBDEV_G_FMT + +``int ioctl(int fd, VIDIOC_SUBDEV_G_FMT, struct v4l2_subdev_format *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_FMT, struct v4l2_subdev_format *argp ) - :name: VIDIOC_SUBDEV_S_FMT +.. c:macro:: VIDIOC_SUBDEV_S_FMT +``int ioctl(int fd, VIDIOC_SUBDEV_S_FMT, struct v4l2_subdev_format *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_subdev_format`. - Description =========== @@ -88,7 +81,6 @@ doesn't match the device capabilities. They must instead modify the format to match what the hardware can provide. The modified format should be as close as possible to the original request. - .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_subdev_format @@ -115,7 +107,6 @@ should be as close as possible to the original request. the array to zero. - .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| .. _v4l2-subdev-format-whence: @@ -132,7 +123,6 @@ should be as close as possible to the original request. - 1 - Active formats, applied to the hardware. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst index 51e1bff797f0..3a50f8b2843d 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_SUBDEV_G_FRAME_INTERVAL: @@ -18,27 +12,26 @@ Name VIDIOC_SUBDEV_G_FRAME_INTERVAL - VIDIOC_SUBDEV_S_FRAME_INTERVAL - Get or set the frame interval on a subdev pad - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_FRAME_INTERVAL, struct v4l2_subdev_frame_interval *argp ) - :name: VIDIOC_SUBDEV_G_FRAME_INTERVAL +.. c:macro:: VIDIOC_SUBDEV_G_FRAME_INTERVAL + +``int ioctl(int fd, VIDIOC_SUBDEV_G_FRAME_INTERVAL, struct v4l2_subdev_frame_interval *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_FRAME_INTERVAL, struct v4l2_subdev_frame_interval *argp ) - :name: VIDIOC_SUBDEV_S_FRAME_INTERVAL +.. c:macro:: VIDIOC_SUBDEV_S_FRAME_INTERVAL +``int ioctl(int fd, VIDIOC_SUBDEV_S_FRAME_INTERVAL, struct v4l2_subdev_frame_interval *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_subdev_frame_interval`. - Description =========== @@ -81,7 +74,6 @@ Sub-devices that support the frame interval ioctls should implement them on a single pad only. Their behaviour when supported on multiple pads of the same sub-device is not defined. - .. c:type:: v4l2_subdev_frame_interval .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -102,7 +94,6 @@ the same sub-device is not defined. - Reserved for future extensions. Applications and drivers must set the array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst index 06c9553ac48f..f35b9562df21 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_SUBDEV_G_SELECTION: @@ -18,27 +12,26 @@ Name VIDIOC_SUBDEV_G_SELECTION - VIDIOC_SUBDEV_S_SELECTION - Get or set selection rectangles on a subdev pad - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_SELECTION, struct v4l2_subdev_selection *argp ) - :name: VIDIOC_SUBDEV_G_SELECTION +.. c:macro:: VIDIOC_SUBDEV_G_SELECTION + +``int ioctl(int fd, VIDIOC_SUBDEV_G_SELECTION, struct v4l2_subdev_selection *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_SELECTION, struct v4l2_subdev_selection *argp ) - :name: VIDIOC_SUBDEV_S_SELECTION +.. c:macro:: VIDIOC_SUBDEV_S_SELECTION +``int ioctl(int fd, VIDIOC_SUBDEV_S_SELECTION, struct v4l2_subdev_selection *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_subdev_selection`. - Description =========== @@ -65,7 +58,6 @@ There are two types of selection targets: actual and bounds. The actual targets are the targets which configure the hardware. The BOUNDS target will return a rectangle that contain all possible actual rectangles. - Discovering supported features ------------------------------ @@ -76,7 +68,6 @@ return ``EINVAL``. Selection targets and flags are documented in :ref:`v4l2-selections-common`. - .. c:type:: v4l2_subdev_selection .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -107,7 +98,6 @@ Selection targets and flags are documented in - Reserved for future extensions. Applications and drivers must set the array to zero. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst index 0371a76321af..949d9775b03d 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_SUBDEV_QUERYCAP: @@ -18,24 +12,22 @@ Name VIDIOC_SUBDEV_QUERYCAP - Query sub-device capabilities - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_QUERYCAP, struct v4l2_subdev_capability *argp ) - :name: VIDIOC_SUBDEV_QUERYCAP +.. c:macro:: VIDIOC_SUBDEV_QUERYCAP +``int ioctl(int fd, VIDIOC_SUBDEV_QUERYCAP, struct v4l2_subdev_capability *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_subdev_capability`. - Description =========== diff --git a/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst b/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst index ae3ed73c0a9e..d1ad35164033 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst @@ -1,11 +1,5 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _VIDIOC_SUBSCRIBE_EVENT: .. _VIDIOC_UNSUBSCRIBE_EVENT: @@ -19,34 +13,32 @@ Name VIDIOC_SUBSCRIBE_EVENT - VIDIOC_UNSUBSCRIBE_EVENT - Subscribe or unsubscribe event - Synopsis ======== -.. c:function:: int ioctl( int fd, VIDIOC_SUBSCRIBE_EVENT, struct v4l2_event_subscription *argp ) - :name: VIDIOC_SUBSCRIBE_EVENT +.. c:macro:: VIDIOC_SUBSCRIBE_EVENT + +``int ioctl(int fd, VIDIOC_SUBSCRIBE_EVENT, struct v4l2_event_subscription *argp)`` -.. c:function:: int ioctl( int fd, VIDIOC_UNSUBSCRIBE_EVENT, struct v4l2_event_subscription *argp ) - :name: VIDIOC_UNSUBSCRIBE_EVENT +.. c:macro:: VIDIOC_UNSUBSCRIBE_EVENT +``int ioctl(int fd, VIDIOC_UNSUBSCRIBE_EVENT, struct v4l2_event_subscription *argp)`` Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <func-open>`. + File descriptor returned by :c:func:`open()`. ``argp`` Pointer to struct :c:type:`v4l2_event_subscription`. - Description =========== Subscribe or unsubscribe V4L2 event. Subscribed events are dequeued by using the :ref:`VIDIOC_DQEVENT` ioctl. - .. tabularcolumns:: |p{4.6cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_event_subscription @@ -79,7 +71,6 @@ using the :ref:`VIDIOC_DQEVENT` ioctl. the array to zero. - .. tabularcolumns:: |p{6.8cm}|p{2.2cm}|p{8.5cm}| .. _event-flags: @@ -114,7 +105,6 @@ using the :ref:`VIDIOC_DQEVENT` ioctl. Think carefully when you set this flag so you won't get into situations like that. - Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/yuv-formats.rst b/Documentation/userspace-api/media/v4l/yuv-formats.rst index 8ee92d0cd769..4a05a105a9e6 100644 --- a/Documentation/userspace-api/media/v4l/yuv-formats.rst +++ b/Documentation/userspace-api/media/v4l/yuv-formats.rst @@ -1,11 +1,4 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later .. _yuv-formats: diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions index ca05e4e126b2..121e396a2779 100644 --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions @@ -180,7 +180,7 @@ replace define V4L2_CAP_IO_MC device-capabilities # V4L2 pix flags replace define V4L2_PIX_FMT_PRIV_MAGIC :c:type:`v4l2_pix_format` -replace define V4L2_PIX_FMT_FLAG_PREMUL_ALPHA reserved-formats +replace define V4L2_PIX_FMT_FLAG_PREMUL_ALPHA format-flags # V4L2 format flags replace define V4L2_FMT_FLAG_COMPRESSED fmtdesc-flags @@ -188,6 +188,11 @@ replace define V4L2_FMT_FLAG_EMULATED fmtdesc-flags replace define V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM fmtdesc-flags replace define V4L2_FMT_FLAG_DYN_RESOLUTION fmtdesc-flags replace define V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL fmtdesc-flags +replace define V4L2_FMT_FLAG_CSC_COLORSPACE fmtdesc-flags +replace define V4L2_FMT_FLAG_CSC_XFER_FUNC fmtdesc-flags +replace define V4L2_FMT_FLAG_CSC_YCBCR_ENC fmtdesc-flags +replace define V4L2_FMT_FLAG_CSC_HSV_ENC fmtdesc-flags +replace define V4L2_FMT_FLAG_CSC_QUANTIZATION fmtdesc-flags # V4L2 timecode types replace define V4L2_TC_TYPE_24FPS timecode-type diff --git a/Documentation/virt/index.rst b/Documentation/virt/index.rst index de1ab81df958..350f5c869b56 100644 --- a/Documentation/virt/index.rst +++ b/Documentation/virt/index.rst @@ -8,9 +8,10 @@ Linux Virtualization Support :maxdepth: 2 kvm/index - uml/user_mode_linux + uml/user_mode_linux_howto_v2 paravirt_ops guest-halt-polling + ne_overview .. only:: html and subproject diff --git a/Documentation/virt/kvm/amd-memory-encryption.rst b/Documentation/virt/kvm/amd-memory-encryption.rst index 2d44388438cc..09a8f2a34e39 100644 --- a/Documentation/virt/kvm/amd-memory-encryption.rst +++ b/Documentation/virt/kvm/amd-memory-encryption.rst @@ -53,11 +53,11 @@ key management interface to perform common hypervisor activities such as encrypting bootstrap code, snapshot, migrating and debugging the guest. For more information, see the SEV Key Management spec [api-spec]_ -The main ioctl to access SEV is KVM_MEM_ENCRYPT_OP. If the argument -to KVM_MEM_ENCRYPT_OP is NULL, the ioctl returns 0 if SEV is enabled +The main ioctl to access SEV is KVM_MEMORY_ENCRYPT_OP. If the argument +to KVM_MEMORY_ENCRYPT_OP is NULL, the ioctl returns 0 if SEV is enabled and ``ENOTTY` if it is disabled (on some older versions of Linux, the ioctl runs normally even with a NULL argument, and therefore will -likely return ``EFAULT``). If non-NULL, the argument to KVM_MEM_ENCRYPT_OP +likely return ``EFAULT``). If non-NULL, the argument to KVM_MEMORY_ENCRYPT_OP must be a struct kvm_sev_cmd:: struct kvm_sev_cmd { diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index eb3a1316f03e..36d5f1f3c6dd 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -4211,7 +4211,7 @@ H_GET_CPU_CHARACTERISTICS hypercall. :Capability: basic :Architectures: x86 -:Type: system +:Type: vm :Parameters: an opaque platform specific structure (in/out) :Returns: 0 on success; -1 on error @@ -4343,7 +4343,7 @@ Errors: #define KVM_STATE_NESTED_VMX_SMM_GUEST_MODE 0x00000001 #define KVM_STATE_NESTED_VMX_SMM_VMXON 0x00000002 -#define KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE 0x00000001 + #define KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE 0x00000001 struct kvm_vmx_nested_state_hdr { __u64 vmxon_pa; @@ -4498,11 +4498,14 @@ Currently, the following list of CPUID leaves are returned: - HYPERV_CPUID_ENLIGHTMENT_INFO - HYPERV_CPUID_IMPLEMENT_LIMITS - HYPERV_CPUID_NESTED_FEATURES + - HYPERV_CPUID_SYNDBG_VENDOR_AND_MAX_FUNCTIONS + - HYPERV_CPUID_SYNDBG_INTERFACE + - HYPERV_CPUID_SYNDBG_PLATFORM_CAPABILITIES HYPERV_CPUID_NESTED_FEATURES leaf is only exposed when Enlightened VMCS was enabled on the corresponding vCPU (KVM_CAP_HYPERV_ENLIGHTENED_VMCS). -Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure +Userspace invokes KVM_GET_SUPPORTED_HV_CPUID by passing a kvm_cpuid2 structure with the 'nent' field indicating the number of entries in the variable-size array 'entries'. If the number of entries is too low to describe all Hyper-V feature leaves, an error (E2BIG) is returned. If the number is more or equal @@ -4704,6 +4707,106 @@ KVM_PV_VM_VERIFY Verify the integrity of the unpacked image. Only if this succeeds, KVM is allowed to start protected VCPUs. +4.126 KVM_X86_SET_MSR_FILTER +---------------------------- + +:Capability: KVM_X86_SET_MSR_FILTER +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_msr_filter +:Returns: 0 on success, < 0 on error + +:: + + struct kvm_msr_filter_range { + #define KVM_MSR_FILTER_READ (1 << 0) + #define KVM_MSR_FILTER_WRITE (1 << 1) + __u32 flags; + __u32 nmsrs; /* number of msrs in bitmap */ + __u32 base; /* MSR index the bitmap starts at */ + __u8 *bitmap; /* a 1 bit allows the operations in flags, 0 denies */ + }; + + #define KVM_MSR_FILTER_MAX_RANGES 16 + struct kvm_msr_filter { + #define KVM_MSR_FILTER_DEFAULT_ALLOW (0 << 0) + #define KVM_MSR_FILTER_DEFAULT_DENY (1 << 0) + __u32 flags; + struct kvm_msr_filter_range ranges[KVM_MSR_FILTER_MAX_RANGES]; + }; + +flags values for ``struct kvm_msr_filter_range``: + +``KVM_MSR_FILTER_READ`` + + Filter read accesses to MSRs using the given bitmap. A 0 in the bitmap + indicates that a read should immediately fail, while a 1 indicates that + a read for a particular MSR should be handled regardless of the default + filter action. + +``KVM_MSR_FILTER_WRITE`` + + Filter write accesses to MSRs using the given bitmap. A 0 in the bitmap + indicates that a write should immediately fail, while a 1 indicates that + a write for a particular MSR should be handled regardless of the default + filter action. + +``KVM_MSR_FILTER_READ | KVM_MSR_FILTER_WRITE`` + + Filter both read and write accesses to MSRs using the given bitmap. A 0 + in the bitmap indicates that both reads and writes should immediately fail, + while a 1 indicates that reads and writes for a particular MSR are not + filtered by this range. + +flags values for ``struct kvm_msr_filter``: + +``KVM_MSR_FILTER_DEFAULT_ALLOW`` + + If no filter range matches an MSR index that is getting accessed, KVM will + fall back to allowing access to the MSR. + +``KVM_MSR_FILTER_DEFAULT_DENY`` + + If no filter range matches an MSR index that is getting accessed, KVM will + fall back to rejecting access to the MSR. In this mode, all MSRs that should + be processed by KVM need to explicitly be marked as allowed in the bitmaps. + +This ioctl allows user space to define up to 16 bitmaps of MSR ranges to +specify whether a certain MSR access should be explicitly filtered for or not. + +If this ioctl has never been invoked, MSR accesses are not guarded and the +default KVM in-kernel emulation behavior is fully preserved. + +Calling this ioctl with an empty set of ranges (all nmsrs == 0) disables MSR +filtering. In that mode, ``KVM_MSR_FILTER_DEFAULT_DENY`` is invalid and causes +an error. + +As soon as the filtering is in place, every MSR access is processed through +the filtering except for accesses to the x2APIC MSRs (from 0x800 to 0x8ff); +x2APIC MSRs are always allowed, independent of the ``default_allow`` setting, +and their behavior depends on the ``X2APIC_ENABLE`` bit of the APIC base +register. + +If a bit is within one of the defined ranges, read and write accesses are +guarded by the bitmap's value for the MSR index if the kind of access +is included in the ``struct kvm_msr_filter_range`` flags. If no range +cover this particular access, the behavior is determined by the flags +field in the kvm_msr_filter struct: ``KVM_MSR_FILTER_DEFAULT_ALLOW`` +and ``KVM_MSR_FILTER_DEFAULT_DENY``. + +Each bitmap range specifies a range of MSRs to potentially allow access on. +The range goes from MSR index [base .. base+nmsrs]. The flags field +indicates whether reads, writes or both reads and writes are filtered +by setting a 1 bit in the bitmap for the corresponding MSR index. + +If an MSR access is not permitted through the filtering, it generates a +#GP inside the guest. When combined with KVM_CAP_X86_USER_SPACE_MSR, that +allows user space to deflect and potentially handle various MSR accesses +into user space. + +If a vCPU is in running state while this ioctl is invoked, the vCPU may +experience inconsistent filtering behavior on MSR accesses. + 5. The kvm_run structure ======================== @@ -4869,14 +4972,13 @@ to the byte array. .. note:: - For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR and - KVM_EXIT_EPR the corresponding - -operations are complete (and guest state is consistent) only after userspace -has re-entered the kernel with KVM_RUN. The kernel side will first finish -incomplete operations and then check for pending signals. Userspace -can re-enter the guest with an unmasked signal pending to complete -pending operations. + For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR, + KVM_EXIT_EPR, KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR the corresponding + operations are complete (and guest state is consistent) only after userspace + has re-entered the kernel with KVM_RUN. The kernel side will first finish + incomplete operations and then check for pending signals. Userspace + can re-enter the guest with an unmasked signal pending to complete + pending operations. :: @@ -5165,6 +5267,44 @@ if it decides to decode and emulate the instruction. :: + /* KVM_EXIT_X86_RDMSR / KVM_EXIT_X86_WRMSR */ + struct { + __u8 error; /* user -> kernel */ + __u8 pad[7]; + __u32 reason; /* kernel -> user */ + __u32 index; /* kernel -> user */ + __u64 data; /* kernel <-> user */ + } msr; + +Used on x86 systems. When the VM capability KVM_CAP_X86_USER_SPACE_MSR is +enabled, MSR accesses to registers that would invoke a #GP by KVM kernel code +will instead trigger a KVM_EXIT_X86_RDMSR exit for reads and KVM_EXIT_X86_WRMSR +exit for writes. + +The "reason" field specifies why the MSR trap occurred. User space will only +receive MSR exit traps when a particular reason was requested during through +ENABLE_CAP. Currently valid exit reasons are: + + KVM_MSR_EXIT_REASON_UNKNOWN - access to MSR that is unknown to KVM + KVM_MSR_EXIT_REASON_INVAL - access to invalid MSRs or reserved bits + KVM_MSR_EXIT_REASON_FILTER - access blocked by KVM_X86_SET_MSR_FILTER + +For KVM_EXIT_X86_RDMSR, the "index" field tells user space which MSR the guest +wants to read. To respond to this request with a successful read, user space +writes the respective data into the "data" field and must continue guest +execution to ensure the read data is transferred into guest register state. + +If the RDMSR request was unsuccessful, user space indicates that with a "1" in +the "error" field. This will inject a #GP into the guest when the VCPU is +executed again. + +For KVM_EXIT_X86_WRMSR, the "index" field tells user space which MSR the guest +wants to write. Once finished processing the event, user space must continue +vCPU execution. If the MSR write was unsuccessful, user space also sets the +"error" field to "1". + +:: + /* Fix the size of the union. */ char padding[256]; }; @@ -5852,6 +5992,28 @@ controlled by the kvm module parameter halt_poll_ns. This capability allows the maximum halt time to specified on a per-VM basis, effectively overriding the module parameter for the target VM. +7.21 KVM_CAP_X86_USER_SPACE_MSR +------------------------------- + +:Architectures: x86 +:Target: VM +:Parameters: args[0] contains the mask of KVM_MSR_EXIT_REASON_* events to report +:Returns: 0 on success; -1 on error + +This capability enables trapping of #GP invoking RDMSR and WRMSR instructions +into user space. + +When a guest requests to read or write an MSR, KVM may not implement all MSRs +that are relevant to a respective system. It also does not differentiate by +CPU type. + +To allow more fine grained control over MSR handling, user space may enable +this capability. With it enabled, MSR accesses that match the mask specified in +args[0] and trigger a #GP event inside the guest by KVM will instead trigger +KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR exit notifications which user space +can then handle to implement model specific MSR handling and/or user notifications +to inform a user that an MSR was not handled. + 8. Other capabilities. ====================== @@ -6130,7 +6292,7 @@ HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx. 8.21 KVM_CAP_HYPERV_DIRECT_TLBFLUSH ----------------------------------- -:Architecture: x86 +:Architectures: x86 This capability indicates that KVM running on top of Hyper-V hypervisor enables Direct TLB flush for its guests meaning that TLB flush @@ -6143,19 +6305,89 @@ in CPUID and only exposes Hyper-V identification. In this case, guest thinks it's running on Hyper-V and only use Hyper-V hypercalls. 8.22 KVM_CAP_S390_VCPU_RESETS +----------------------------- -Architectures: s390 +:Architectures: s390 This capability indicates that the KVM_S390_NORMAL_RESET and KVM_S390_CLEAR_RESET ioctls are available. 8.23 KVM_CAP_S390_PROTECTED +--------------------------- -Architecture: s390 - +:Architectures: s390 This capability indicates that the Ultravisor has been initialized and KVM can therefore start protected VMs. This capability governs the KVM_S390_PV_COMMAND ioctl and the KVM_MP_STATE_LOAD MP_STATE. KVM_SET_MP_STATE can fail for protected guests when the state change is invalid. + +8.24 KVM_CAP_STEAL_TIME +----------------------- + +:Architectures: arm64, x86 + +This capability indicates that KVM supports steal time accounting. +When steal time accounting is supported it may be enabled with +architecture-specific interfaces. This capability and the architecture- +specific interfaces must be consistent, i.e. if one says the feature +is supported, than the other should as well and vice versa. For arm64 +see Documentation/virt/kvm/devices/vcpu.rst "KVM_ARM_VCPU_PVTIME_CTRL". +For x86 see Documentation/virt/kvm/msr.rst "MSR_KVM_STEAL_TIME". + +8.25 KVM_CAP_S390_DIAG318 +------------------------- + +:Architectures: s390 + +This capability enables a guest to set information about its control program +(i.e. guest kernel type and version). The information is helpful during +system/firmware service events, providing additional data about the guest +environments running on the machine. + +The information is associated with the DIAGNOSE 0x318 instruction, which sets +an 8-byte value consisting of a one-byte Control Program Name Code (CPNC) and +a 7-byte Control Program Version Code (CPVC). The CPNC determines what +environment the control program is running in (e.g. Linux, z/VM...), and the +CPVC is used for information specific to OS (e.g. Linux version, Linux +distribution...) + +If this capability is available, then the CPNC and CPVC can be synchronized +between KVM and userspace via the sync regs mechanism (KVM_SYNC_DIAG318). + +8.26 KVM_CAP_X86_USER_SPACE_MSR +------------------------------- + +:Architectures: x86 + +This capability indicates that KVM supports deflection of MSR reads and +writes to user space. It can be enabled on a VM level. If enabled, MSR +accesses that would usually trigger a #GP by KVM into the guest will +instead get bounced to user space through the KVM_EXIT_X86_RDMSR and +KVM_EXIT_X86_WRMSR exit notifications. + +8.25 KVM_X86_SET_MSR_FILTER +--------------------------- + +:Architectures: x86 + +This capability indicates that KVM supports that accesses to user defined MSRs +may be rejected. With this capability exposed, KVM exports new VM ioctl +KVM_X86_SET_MSR_FILTER which user space can call to specify bitmaps of MSR +ranges that KVM should reject access to. + +In combination with KVM_CAP_X86_USER_SPACE_MSR, this allows user space to +trap and emulate MSRs that are outside of the scope of KVM as well as +limit the attack surface on KVM's MSR emulation code. + + +8.26 KVM_CAP_ENFORCE_PV_CPUID +----------------------------- + +Architectures: x86 + +When enabled, KVM will disable paravirtual features provided to the +guest according to the bits in the KVM_CPUID_FEATURES CPUID leaf +(0x40000001). Otherwise, a guest may use the paravirtual features +regardless of what has actually been exposed through the CPUID leaf. diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst index d9eba93aa364..83cadd8186fa 100644 --- a/Documentation/virt/kvm/arm/hyp-abi.rst +++ b/Documentation/virt/kvm/arm/hyp-abi.rst @@ -54,9 +54,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h): x3 = x1's value when entering the next payload (arm64) x4 = x2's value when entering the next payload (arm64) - Mask all exceptions, disable the MMU, move the arguments into place - (arm64 only), and jump to the restart address while at HYP/EL2. This - hypercall is not expected to return to its caller. + Mask all exceptions, disable the MMU, clear I+D bits, move the arguments + into place (arm64 only), and jump to the restart address while at HYP/EL2. + This hypercall is not expected to return to its caller. Any other value of r0/x0 triggers a hypervisor-specific handling, which is not documented here. diff --git a/Documentation/virt/kvm/cpuid.rst b/Documentation/virt/kvm/cpuid.rst index a7dff9186bed..7d81c0aa4a59 100644 --- a/Documentation/virt/kvm/cpuid.rst +++ b/Documentation/virt/kvm/cpuid.rst @@ -38,64 +38,64 @@ returns:: where ``flag`` is defined as below: -================================= =========== ================================ -flag value meaning -================================= =========== ================================ -KVM_FEATURE_CLOCKSOURCE 0 kvmclock available at msrs - 0x11 and 0x12 +================================== =========== ================================ +flag value meaning +================================== =========== ================================ +KVM_FEATURE_CLOCKSOURCE 0 kvmclock available at msrs + 0x11 and 0x12 -KVM_FEATURE_NOP_IO_DELAY 1 not necessary to perform delays - on PIO operations +KVM_FEATURE_NOP_IO_DELAY 1 not necessary to perform delays + on PIO operations -KVM_FEATURE_MMU_OP 2 deprecated +KVM_FEATURE_MMU_OP 2 deprecated -KVM_FEATURE_CLOCKSOURCE2 3 kvmclock available at msrs - 0x4b564d00 and 0x4b564d01 +KVM_FEATURE_CLOCKSOURCE2 3 kvmclock available at msrs + 0x4b564d00 and 0x4b564d01 -KVM_FEATURE_ASYNC_PF 4 async pf can be enabled by - writing to msr 0x4b564d02 +KVM_FEATURE_ASYNC_PF 4 async pf can be enabled by + writing to msr 0x4b564d02 -KVM_FEATURE_STEAL_TIME 5 steal time can be enabled by - writing to msr 0x4b564d03 +KVM_FEATURE_STEAL_TIME 5 steal time can be enabled by + writing to msr 0x4b564d03 -KVM_FEATURE_PV_EOI 6 paravirtualized end of interrupt - handler can be enabled by - writing to msr 0x4b564d04 +KVM_FEATURE_PV_EOI 6 paravirtualized end of interrupt + handler can be enabled by + writing to msr 0x4b564d04 -KVM_FEATURE_PV_UNHAULT 7 guest checks this feature bit - before enabling paravirtualized - spinlock support +KVM_FEATURE_PV_UNHALT 7 guest checks this feature bit + before enabling paravirtualized + spinlock support -KVM_FEATURE_PV_TLB_FLUSH 9 guest checks this feature bit - before enabling paravirtualized - tlb flush +KVM_FEATURE_PV_TLB_FLUSH 9 guest checks this feature bit + before enabling paravirtualized + tlb flush -KVM_FEATURE_ASYNC_PF_VMEXIT 10 paravirtualized async PF VM EXIT - can be enabled by setting bit 2 - when writing to msr 0x4b564d02 +KVM_FEATURE_ASYNC_PF_VMEXIT 10 paravirtualized async PF VM EXIT + can be enabled by setting bit 2 + when writing to msr 0x4b564d02 -KVM_FEATURE_PV_SEND_IPI 11 guest checks this feature bit - before enabling paravirtualized - sebd IPIs +KVM_FEATURE_PV_SEND_IPI 11 guest checks this feature bit + before enabling paravirtualized + send IPIs -KVM_FEATURE_PV_POLL_CONTROL 12 host-side polling on HLT can - be disabled by writing - to msr 0x4b564d05. +KVM_FEATURE_POLL_CONTROL 12 host-side polling on HLT can + be disabled by writing + to msr 0x4b564d05. -KVM_FEATURE_PV_SCHED_YIELD 13 guest checks this feature bit - before using paravirtualized - sched yield. +KVM_FEATURE_PV_SCHED_YIELD 13 guest checks this feature bit + before using paravirtualized + sched yield. -KVM_FEATURE_ASYNC_PF_INT 14 guest checks this feature bit - before using the second async - pf control msr 0x4b564d06 and - async pf acknowledgment msr - 0x4b564d07. +KVM_FEATURE_ASYNC_PF_INT 14 guest checks this feature bit + before using the second async + pf control msr 0x4b564d06 and + async pf acknowledgment msr + 0x4b564d07. -KVM_FEATURE_CLOCSOURCE_STABLE_BIT 24 host will warn if no guest-side - per-cpu warps are expeced in - kvmclock -================================= =========== ================================ +KVM_FEATURE_CLOCKSOURCE_STABLE_BIT 24 host will warn if no guest-side + per-cpu warps are expected in + kvmclock +================================== =========== ================================ :: diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst index ca374d3fe085..2acec3b9ef65 100644 --- a/Documentation/virt/kvm/devices/vcpu.rst +++ b/Documentation/virt/kvm/devices/vcpu.rst @@ -25,8 +25,10 @@ Returns: ======= ======================================================== -EBUSY The PMU overflow interrupt is already set - -ENXIO The overflow interrupt not set when attempting to get it - -ENODEV PMUv3 not supported + -EFAULT Error reading interrupt number + -ENXIO PMUv3 not supported or the overflow interrupt not set + when attempting to get it + -ENODEV KVM_ARM_VCPU_PMU_V3 feature missing from VCPU -EINVAL Invalid PMU overflow interrupt number supplied or trying to set the IRQ number without using an in-kernel irqchip. @@ -45,9 +47,10 @@ all vcpus, while as an SPI it must be a separate number per vcpu. Returns: ======= ====================================================== + -EEXIST Interrupt number already used -ENODEV PMUv3 not supported or GIC not initialized - -ENXIO PMUv3 not properly configured or in-kernel irqchip not - configured as required prior to calling this attribute + -ENXIO PMUv3 not supported, missing VCPU feature or interrupt + number not set -EBUSY PMUv3 already initialized ======= ====================================================== @@ -55,6 +58,52 @@ Request the initialization of the PMUv3. If using the PMUv3 with an in-kernel virtual GIC implementation, this must be done after initializing the in-kernel irqchip. +1.3 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_FILTER +----------------------------------------- + +:Parameters: in kvm_device_attr.addr the address for a PMU event filter is a + pointer to a struct kvm_pmu_event_filter + +:Returns: + + ======= ====================================================== + -ENODEV PMUv3 not supported or GIC not initialized + -ENXIO PMUv3 not properly configured or in-kernel irqchip not + configured as required prior to calling this attribute + -EBUSY PMUv3 already initialized + -EINVAL Invalid filter range + ======= ====================================================== + +Request the installation of a PMU event filter described as follows:: + + struct kvm_pmu_event_filter { + __u16 base_event; + __u16 nevents; + + #define KVM_PMU_EVENT_ALLOW 0 + #define KVM_PMU_EVENT_DENY 1 + + __u8 action; + __u8 pad[3]; + }; + +A filter range is defined as the range [@base_event, @base_event + @nevents), +together with an @action (KVM_PMU_EVENT_ALLOW or KVM_PMU_EVENT_DENY). The +first registered range defines the global policy (global ALLOW if the first +@action is DENY, global DENY if the first @action is ALLOW). Multiple ranges +can be programmed, and must fit within the event space defined by the PMU +architecture (10 bits on ARMv8.0, 16 bits from ARMv8.1 onwards). + +Note: "Cancelling" a filter by registering the opposite action for the same +range doesn't change the default action. For example, installing an ALLOW +filter for event range [0:10) as the first filter and then applying a DENY +action for the same range will leave the whole range as disabled. + +Restrictions: Event 0 (SW_INCR) is never filtered, as it doesn't count a +hardware event. Filtering event 0x1E (CHAIN) has no effect either, as it +isn't strictly speaking an event. Filtering the cycle counter is possible +using event 0x11 (CPU_CYCLES). + 2. GROUP: KVM_ARM_VCPU_TIMER_CTRL ================================= diff --git a/Documentation/virt/ne_overview.rst b/Documentation/virt/ne_overview.rst new file mode 100644 index 000000000000..39b0c8fe2654 --- /dev/null +++ b/Documentation/virt/ne_overview.rst @@ -0,0 +1,95 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +Nitro Enclaves +============== + +Overview +======== + +Nitro Enclaves (NE) is a new Amazon Elastic Compute Cloud (EC2) capability +that allows customers to carve out isolated compute environments within EC2 +instances [1]. + +For example, an application that processes sensitive data and runs in a VM, +can be separated from other applications running in the same VM. This +application then runs in a separate VM than the primary VM, namely an enclave. + +An enclave runs alongside the VM that spawned it. This setup matches low latency +applications needs. The resources that are allocated for the enclave, such as +memory and CPUs, are carved out of the primary VM. Each enclave is mapped to a +process running in the primary VM, that communicates with the NE driver via an +ioctl interface. + +In this sense, there are two components: + +1. An enclave abstraction process - a user space process running in the primary +VM guest that uses the provided ioctl interface of the NE driver to spawn an +enclave VM (that's 2 below). + +There is a NE emulated PCI device exposed to the primary VM. The driver for this +new PCI device is included in the NE driver. + +The ioctl logic is mapped to PCI device commands e.g. the NE_START_ENCLAVE ioctl +maps to an enclave start PCI command. The PCI device commands are then +translated into actions taken on the hypervisor side; that's the Nitro +hypervisor running on the host where the primary VM is running. The Nitro +hypervisor is based on core KVM technology. + +2. The enclave itself - a VM running on the same host as the primary VM that +spawned it. Memory and CPUs are carved out of the primary VM and are dedicated +for the enclave VM. An enclave does not have persistent storage attached. + +The memory regions carved out of the primary VM and given to an enclave need to +be aligned 2 MiB / 1 GiB physically contiguous memory regions (or multiple of +this size e.g. 8 MiB). The memory can be allocated e.g. by using hugetlbfs from +user space [2][3]. The memory size for an enclave needs to be at least 64 MiB. +The enclave memory and CPUs need to be from the same NUMA node. + +An enclave runs on dedicated cores. CPU 0 and its CPU siblings need to remain +available for the primary VM. A CPU pool has to be set for NE purposes by an +user with admin capability. See the cpu list section from the kernel +documentation [4] for how a CPU pool format looks. + +An enclave communicates with the primary VM via a local communication channel, +using virtio-vsock [5]. The primary VM has virtio-pci vsock emulated device, +while the enclave VM has a virtio-mmio vsock emulated device. The vsock device +uses eventfd for signaling. The enclave VM sees the usual interfaces - local +APIC and IOAPIC - to get interrupts from virtio-vsock device. The virtio-mmio +device is placed in memory below the typical 4 GiB. + +The application that runs in the enclave needs to be packaged in an enclave +image together with the OS ( e.g. kernel, ramdisk, init ) that will run in the +enclave VM. The enclave VM has its own kernel and follows the standard Linux +boot protocol [6]. + +The kernel bzImage, the kernel command line, the ramdisk(s) are part of the +Enclave Image Format (EIF); plus an EIF header including metadata such as magic +number, eif version, image size and CRC. + +Hash values are computed for the entire enclave image (EIF), the kernel and +ramdisk(s). That's used, for example, to check that the enclave image that is +loaded in the enclave VM is the one that was intended to be run. + +These crypto measurements are included in a signed attestation document +generated by the Nitro Hypervisor and further used to prove the identity of the +enclave; KMS is an example of service that NE is integrated with and that checks +the attestation doc. + +The enclave image (EIF) is loaded in the enclave memory at offset 8 MiB. The +init process in the enclave connects to the vsock CID of the primary VM and a +predefined port - 9000 - to send a heartbeat value - 0xb7. This mechanism is +used to check in the primary VM that the enclave has booted. The CID of the +primary VM is 3. + +If the enclave VM crashes or gracefully exits, an interrupt event is received by +the NE driver. This event is sent further to the user space enclave process +running in the primary VM via a poll notification mechanism. Then the user space +enclave process can exit. + +[1] https://aws.amazon.com/ec2/nitro/nitro-enclaves/ +[2] https://www.kernel.org/doc/html/latest/admin-guide/mm/hugetlbpage.html +[3] https://lwn.net/Articles/807108/ +[4] https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html +[5] https://man7.org/linux/man-pages/man7/vsock.7.html +[6] https://www.kernel.org/doc/html/latest/x86/boot.html diff --git a/Documentation/virt/uml/user_mode_linux.rst b/Documentation/virt/uml/user_mode_linux.rst deleted file mode 100644 index de0f0b2c9d5b..000000000000 --- a/Documentation/virt/uml/user_mode_linux.rst +++ /dev/null @@ -1,4403 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -===================== -User Mode Linux HOWTO -===================== - -:Author: User Mode Linux Core Team -:Last-updated: Sat Jan 25 16:07:55 CET 2020 - -This document describes the use and abuse of Jeff Dike's User Mode -Linux: a port of the Linux kernel as a normal Intel Linux process. - - -.. Table of Contents - - 1. Introduction - - 1.1 How is User Mode Linux Different? - 1.2 Why Would I Want User Mode Linux? - - 2. Compiling the kernel and modules - - 2.1 Compiling the kernel - 2.2 Compiling and installing kernel modules - 2.3 Compiling and installing uml_utilities - - 3. Running UML and logging in - - 3.1 Running UML - 3.2 Logging in - 3.3 Examples - - 4. UML on 2G/2G hosts - - 4.1 Introduction - 4.2 The problem - 4.3 The solution - - 5. Setting up serial lines and consoles - - 5.1 Specifying the device - 5.2 Specifying the channel - 5.3 Examples - - 6. Setting up the network - - 6.1 General setup - 6.2 Userspace daemons - 6.3 Specifying ethernet addresses - 6.4 UML interface setup - 6.5 Multicast - 6.6 TUN/TAP with the uml_net helper - 6.7 TUN/TAP with a preconfigured tap device - 6.8 Ethertap - 6.9 The switch daemon - 6.10 Slip - 6.11 Slirp - 6.12 pcap - 6.13 Setting up the host yourself - - 7. Sharing Filesystems between Virtual Machines - - 7.1 A warning - 7.2 Using layered block devices - 7.3 Note! - 7.4 Another warning - 7.5 uml_moo : Merging a COW file with its backing file - - 8. Creating filesystems - - 8.1 Create the filesystem file - 8.2 Assign the file to a UML device - 8.3 Creating and mounting the filesystem - - 9. Host file access - - 9.1 Using hostfs - 9.2 hostfs as the root filesystem - 9.3 Building hostfs - - 10. The Management Console - 10.1 version - 10.2 halt and reboot - 10.3 config - 10.4 remove - 10.5 sysrq - 10.6 help - 10.7 cad - 10.8 stop - 10.9 go - - 11. Kernel debugging - - 11.1 Starting the kernel under gdb - 11.2 Examining sleeping processes - 11.3 Running ddd on UML - 11.4 Debugging modules - 11.5 Attaching gdb to the kernel - 11.6 Using alternate debuggers - - 12. Kernel debugging examples - - 12.1 The case of the hung fsck - 12.2 Episode 2: The case of the hung fsck - - 13. What to do when UML doesn't work - - 13.1 Strange compilation errors when you build from source - 13.2 (obsolete) - 13.3 A variety of panics and hangs with /tmp on a reiserfs filesystem - 13.4 The compile fails with errors about conflicting types for 'open', 'dup', and 'waitpid' - 13.5 UML doesn't work when /tmp is an NFS filesystem - 13.6 UML hangs on boot when compiled with gprof support - 13.7 syslogd dies with a SIGTERM on startup - 13.8 TUN/TAP networking doesn't work on a 2.4 host - 13.9 You can network to the host but not to other machines on the net - 13.10 I have no root and I want to scream - 13.11 UML build conflict between ptrace.h and ucontext.h - 13.12 The UML BogoMips is exactly half the host's BogoMips - 13.13 When you run UML, it immediately segfaults - 13.14 xterms appear, then immediately disappear - 13.15 Any other panic, hang, or strange behavior - - 14. Diagnosing Problems - - 14.1 Case 1 : Normal kernel panics - 14.2 Case 2 : Tracing thread panics - 14.3 Case 3 : Tracing thread panics caused by other threads - 14.4 Case 4 : Hangs - - 15. Thanks - - 15.1 Code and Documentation - 15.2 Flushing out bugs - 15.3 Buglets and clean-ups - 15.4 Case Studies - 15.5 Other contributions - - -1. Introduction -================ - - Welcome to User Mode Linux. It's going to be fun. - - - -1.1. How is User Mode Linux Different? ---------------------------------------- - - Normally, the Linux Kernel talks straight to your hardware (video - card, keyboard, hard drives, etc), and any programs which run ask the - kernel to operate the hardware, like so:: - - - - +-----------+-----------+----+ - | Process 1 | Process 2 | ...| - +-----------+-----------+----+ - | Linux Kernel | - +----------------------------+ - | Hardware | - +----------------------------+ - - - - - The User Mode Linux Kernel is different; instead of talking to the - hardware, it talks to a `real` Linux kernel (called the `host kernel` - from now on), like any other program. Programs can then run inside - User-Mode Linux as if they were running under a normal kernel, like - so:: - - - - +----------------+ - | Process 2 | ...| - +-----------+----------------+ - | Process 1 | User-Mode Linux| - +----------------------------+ - | Linux Kernel | - +----------------------------+ - | Hardware | - +----------------------------+ - - - - - -1.2. Why Would I Want User Mode Linux? ---------------------------------------- - - - 1. If User Mode Linux crashes, your host kernel is still fine. - - 2. You can run a usermode kernel as a non-root user. - - 3. You can debug the User Mode Linux like any normal process. - - 4. You can run gprof (profiling) and gcov (coverage testing). - - 5. You can play with your kernel without breaking things. - - 6. You can use it as a sandbox for testing new apps. - - 7. You can try new development kernels safely. - - 8. You can run different distributions simultaneously. - - 9. It's extremely fun. - - - -.. _Compiling_the_kernel_and_modules: - -2. Compiling the kernel and modules -==================================== - - - - -2.1. Compiling the kernel --------------------------- - - - Compiling the user mode kernel is just like compiling any other - kernel. - - - 1. Download the latest kernel from your favourite kernel mirror, - such as: - - https://mirrors.edge.kernel.org/pub/linux/kernel/v5.x/linux-5.4.14.tar.xz - - 2. Make a directory and unpack the kernel into it:: - - host% - mkdir ~/uml - - host% - cd ~/uml - - host% - tar xvf linux-5.4.14.tar.xz - - - 3. Run your favorite config; ``make xconfig ARCH=um`` is the most - convenient. ``make config ARCH=um`` and ``make menuconfig ARCH=um`` - will work as well. The defaults will give you a useful kernel. If - you want to change something, go ahead, it probably won't hurt - anything. - - - Note: If the host is configured with a 2G/2G address space split - rather than the usual 3G/1G split, then the packaged UML binaries - will not run. They will immediately segfault. See - :ref:`UML_on_2G/2G_hosts` for the scoop on running UML on your system. - - - - 4. Finish with ``make linux ARCH=um``: the result is a file called - ``linux`` in the top directory of your source tree. - - -2.2. Compiling and installing kernel modules ---------------------------------------------- - - UML modules are built in the same way as the native kernel (with the - exception of the 'ARCH=um' that you always need for UML):: - - - host% make modules ARCH=um - - - - - Any modules that you want to load into this kernel need to be built in - the user-mode pool. Modules from the native kernel won't work. - - You can install them by using ftp or something to copy them into the - virtual machine and dropping them into ``/lib/modules/$(uname -r)``. - - You can also get the kernel build process to install them as follows: - - 1. with the kernel not booted, mount the root filesystem in the top - level of the kernel pool:: - - - host% mount root_fs mnt -o loop - - - - - - - 2. run:: - - - host% - make modules_install INSTALL_MOD_PATH=`pwd`/mnt ARCH=um - - - - - - - 3. unmount the filesystem:: - - - host% umount mnt - - - - - - - 4. boot the kernel on it - - - When the system is booted, you can use insmod as usual to get the - modules into the kernel. A number of things have been loaded into UML - as modules, especially filesystems and network protocols and filters, - so most symbols which need to be exported probably already are. - However, if you do find symbols that need exporting, let us - know at http://user-mode-linux.sourceforge.net/, and - they'll be "taken care of". - - - -2.3. Compiling and installing uml_utilities --------------------------------------------- - - Many features of the UML kernel require a user-space helper program, - so a uml_utilities package is distributed separately from the kernel - patch which provides these helpers. Included within this is: - - - port-helper - Used by consoles which connect to xterms or ports - - - tunctl - Configuration tool to create and delete tap devices - - - uml_net - Setuid binary for automatic tap device configuration - - - uml_switch - User-space virtual switch required for daemon - transport - - The uml_utilities tree is compiled with:: - - - host# - make && make install - - - - - Note that UML kernel patches may require a specific version of the - uml_utilities distribution. If you don't keep up with the mailing - lists, ensure that you have the latest release of uml_utilities if you - are experiencing problems with your UML kernel, particularly when - dealing with consoles or command-line switches to the helper programs - - - - - - - - -3. Running UML and logging in -============================== - - - -3.1. Running UML ------------------ - - It runs on 2.2.15 or later, and all kernel versions since 2.4. - - - Booting UML is straightforward. Simply run 'linux': it will try to - mount the file ``root_fs`` in the current directory. You do not need to - run it as root. If your root filesystem is not named ``root_fs``, then - you need to put a ``ubd0=root_fs_whatever`` switch on the linux command - line. - - - You will need a filesystem to boot UML from. There are a number - available for download from http://user-mode-linux.sourceforge.net. - There are also several tools at - http://user-mode-linux.sourceforge.net/ which can be - used to generate UML-compatible filesystem images from media. - The kernel will boot up and present you with a login prompt. - - -Note: - If the host is configured with a 2G/2G address space split - rather than the usual 3G/1G split, then the packaged UML binaries will - not run. They will immediately segfault. See :ref:`UML_on_2G/2G_hosts` - for the scoop on running UML on your system. - - - -3.2. Logging in ----------------- - - - - The prepackaged filesystems have a root account with password 'root' - and a user account with password 'user'. The login banner will - generally tell you how to log in. So, you log in and you will find - yourself inside a little virtual machine. Our filesystems have a - variety of commands and utilities installed (and it is fairly easy to - add more), so you will have a lot of tools with which to poke around - the system. - - There are a couple of other ways to log in: - - - On a virtual console - - - - Each virtual console that is configured (i.e. the device exists in - /dev and /etc/inittab runs a getty on it) will come up in its own - xterm. If you get tired of the xterms, read - :ref:`setting_up_serial_lines_and_consoles` to see how to attach - the consoles to something else, like host ptys. - - - - - Over the serial line - - - In the boot output, find a line that looks like:: - - - - serial line 0 assigned pty /dev/ptyp1 - - - - - Attach your favorite terminal program to the corresponding tty. I.e. - for minicom, the command would be:: - - - host% minicom -o -p /dev/ttyp1 - - - - - - - - Over the net - - - If the network is running, then you can telnet to the virtual - machine and log in to it. See :ref:`Setting_up_the_network` to learn - about setting up a virtual network. - - When you're done using it, run halt, and the kernel will bring itself - down and the process will exit. - - -3.3. Examples --------------- - - Here are some examples of UML in action: - - - A login session http://user-mode-linux.sourceforge.net/old/login.html - - - A virtual network http://user-mode-linux.sourceforge.net/old/net.html - - - - - -.. _UML_on_2G/2G_hosts: - -4. UML on 2G/2G hosts -====================== - - - - -4.1. Introduction ------------------- - - - Most Linux machines are configured so that the kernel occupies the - upper 1G (0xc0000000 - 0xffffffff) of the 4G address space and - processes use the lower 3G (0x00000000 - 0xbfffffff). However, some - machine are configured with a 2G/2G split, with the kernel occupying - the upper 2G (0x80000000 - 0xffffffff) and processes using the lower - 2G (0x00000000 - 0x7fffffff). - - - - -4.2. The problem ------------------ - - - The prebuilt UML binaries on this site will not run on 2G/2G hosts - because UML occupies the upper .5G of the 3G process address space - (0xa0000000 - 0xbfffffff). Obviously, on 2G/2G hosts, this is right - in the middle of the kernel address space, so UML won't even load - it - will immediately segfault. - - - - -4.3. The solution ------------------- - - - The fix for this is to rebuild UML from source after enabling - CONFIG_HOST_2G_2G (under 'General Setup'). This will cause UML to - load itself in the top .5G of that smaller process address space, - where it will run fine. See :ref:`Compiling_the_kernel_and_modules` if - you need help building UML from source. - - - - - - - -.. _setting_up_serial_lines_and_consoles: - - -5. Setting up serial lines and consoles -======================================== - - - It is possible to attach UML serial lines and consoles to many types - of host I/O channels by specifying them on the command line. - - - You can attach them to host ptys, ttys, file descriptors, and ports. - This allows you to do things like: - - - have a UML console appear on an unused host console, - - - hook two virtual machines together by having one attach to a pty - and having the other attach to the corresponding tty - - - make a virtual machine accessible from the net by attaching a - console to a port on the host. - - - The general format of the command line option is ``device=channel``. - - - -5.1. Specifying the device ---------------------------- - - Devices are specified with "con" or "ssl" (console or serial line, - respectively), optionally with a device number if you are talking - about a specific device. - - - Using just "con" or "ssl" describes all of the consoles or serial - lines. If you want to talk about console #3 or serial line #10, they - would be "con3" and "ssl10", respectively. - - - A specific device name will override a less general "con=" or "ssl=". - So, for example, you can assign a pty to each of the serial lines - except for the first two like this:: - - - ssl=pty ssl0=tty:/dev/tty0 ssl1=tty:/dev/tty1 - - - - - The specificity of the device name is all that matters; order on the - command line is irrelevant. - - - -5.2. Specifying the channel ----------------------------- - - There are a number of different types of channels to attach a UML - device to, each with a different way of specifying exactly what to - attach to. - - - pseudo-terminals - device=pty pts terminals - device=pts - - - This will cause UML to allocate a free host pseudo-terminal for the - device. The terminal that it got will be announced in the boot - log. You access it by attaching a terminal program to the - corresponding tty: - - - screen /dev/pts/n - - - screen /dev/ttyxx - - - minicom -o -p /dev/ttyxx - minicom seems not able to handle pts - devices - - - kermit - start it up, 'open' the device, then 'connect' - - - - - - - terminals - device=tty:tty device file - - - This will make UML attach the device to the specified tty (i.e:: - - - con1=tty:/dev/tty3 - - - - - will attach UML's console 1 to the host's /dev/tty3). If the tty that - you specify is the slave end of a tty/pty pair, something else must - have already opened the corresponding pty in order for this to work. - - - - - - - xterms - device=xterm - - - UML will run an xterm and the device will be attached to it. - - - - - - - Port - device=port:port number - - - This will attach the UML devices to the specified host port. - Attaching console 1 to the host's port 9000 would be done like - this:: - - - con1=port:9000 - - - - - Attaching all the serial lines to that port would be done similarly:: - - - ssl=port:9000 - - - - - You access these devices by telnetting to that port. Each active - telnet session gets a different device. If there are more telnets to a - port than UML devices attached to it, then the extra telnet sessions - will block until an existing telnet detaches, or until another device - becomes active (i.e. by being activated in /etc/inittab). - - This channel has the advantage that you can both attach multiple UML - devices to it and know how to access them without reading the UML boot - log. It is also unique in allowing access to a UML from remote - machines without requiring that the UML be networked. This could be - useful in allowing public access to UMLs because they would be - accessible from the net, but wouldn't need any kind of network - filtering or access control because they would have no network access. - - - If you attach the main console to a portal, then the UML boot will - appear to hang. In reality, it's waiting for a telnet to connect, at - which point the boot will proceed. - - - - - - - already-existing file descriptors - device=file descriptor - - - If you set up a file descriptor on the UML command line, you can - attach a UML device to it. This is most commonly used to put the - main console back on stdin and stdout after assigning all the other - consoles to something else:: - - - con0=fd:0,fd:1 con=pts - - - - - - - - - - Nothing - device=null - - - This allows the device to be opened, in contrast to 'none', but - reads will block, and writes will succeed and the data will be - thrown out. - - - - - - - None - device=none - - - This causes the device to disappear. - - - - You can also specify different input and output channels for a device - by putting a comma between them:: - - - ssl3=tty:/dev/tty2,xterm - - - - - will cause serial line 3 to accept input on the host's /dev/tty2 and - display output on an xterm. That's a silly example - the most common - use of this syntax is to reattach the main console to stdin and stdout - as shown above. - - - If you decide to move the main console away from stdin/stdout, the - initial boot output will appear in the terminal that you're running - UML in. However, once the console driver has been officially - initialized, then the boot output will start appearing wherever you - specified that console 0 should be. That device will receive all - subsequent output. - - - -5.3. Examples --------------- - - There are a number of interesting things you can do with this - capability. - - - First, this is how you get rid of those bleeding console xterms by - attaching them to host ptys:: - - - con=pty con0=fd:0,fd:1 - - - - - This will make a UML console take over an unused host virtual console, - so that when you switch to it, you will see the UML login prompt - rather than the host login prompt:: - - - con1=tty:/dev/tty6 - - - - - You can attach two virtual machines together with what amounts to a - serial line as follows: - - Run one UML with a serial line attached to a pty:: - - - ssl1=pty - - - - - Look at the boot log to see what pty it got (this example will assume - that it got /dev/ptyp1). - - Boot the other UML with a serial line attached to the corresponding - tty:: - - - ssl1=tty:/dev/ttyp1 - - - - - Log in, make sure that it has no getty on that serial line, attach a - terminal program like minicom to it, and you should see the login - prompt of the other virtual machine. - - -.. _setting_up_the_network: - -6. Setting up the network -========================== - - - - This page describes how to set up the various transports and to - provide a UML instance with network access to the host, other machines - on the local net, and the rest of the net. - - - As of 2.4.5, UML networking has been completely redone to make it much - easier to set up, fix bugs, and add new features. - - - There is a new helper, uml_net, which does the host setup that - requires root privileges. - - - There are currently five transport types available for a UML virtual - machine to exchange packets with other hosts: - - - ethertap - - - TUN/TAP - - - Multicast - - - a switch daemon - - - slip - - - slirp - - - pcap - - The TUN/TAP, ethertap, slip, and slirp transports allow a UML - instance to exchange packets with the host. They may be directed - to the host or the host may just act as a router to provide access - to other physical or virtual machines. - - - The pcap transport is a synthetic read-only interface, using the - libpcap binary to collect packets from interfaces on the host and - filter them. This is useful for building preconfigured traffic - monitors or sniffers. - - - The daemon and multicast transports provide a completely virtual - network to other virtual machines. This network is completely - disconnected from the physical network unless one of the virtual - machines on it is acting as a gateway. - - - With so many host transports, which one should you use? Here's when - you should use each one: - - - ethertap - if you want access to the host networking and it is - running 2.2 - - - TUN/TAP - if you want access to the host networking and it is - running 2.4. Also, the TUN/TAP transport is able to use a - preconfigured device, allowing it to avoid using the setuid uml_net - helper, which is a security advantage. - - - Multicast - if you want a purely virtual network and you don't want - to set up anything but the UML - - - a switch daemon - if you want a purely virtual network and you - don't mind running the daemon in order to get somewhat better - performance - - - slip - there is no particular reason to run the slip backend unless - ethertap and TUN/TAP are just not available for some reason - - - slirp - if you don't have root access on the host to setup - networking, or if you don't want to allocate an IP to your UML - - - pcap - not much use for actual network connectivity, but great for - monitoring traffic on the host - - Ethertap is available on 2.4 and works fine. TUN/TAP is preferred - to it because it has better performance and ethertap is officially - considered obsolete in 2.4. Also, the root helper only needs to - run occasionally for TUN/TAP, rather than handling every packet, as - it does with ethertap. This is a slight security advantage since - it provides fewer opportunities for a nasty UML user to somehow - exploit the helper's root privileges. - - -6.1. General setup -------------------- - - First, you must have the virtual network enabled in your UML. If are - running a prebuilt kernel from this site, everything is already - enabled. If you build the kernel yourself, under the "Network device - support" menu, enable "Network device support", and then the three - transports. - - - The next step is to provide a network device to the virtual machine. - This is done by describing it on the kernel command line. - - The general format is:: - - - eth <n> = <transport> , <transport args> - - - - - For example, a virtual ethernet device may be attached to a host - ethertap device as follows:: - - - eth0=ethertap,tap0,fe:fd:0:0:0:1,192.168.0.254 - - - - - This sets up eth0 inside the virtual machine to attach itself to the - host /dev/tap0, assigns it an ethernet address, and assigns the host - tap0 interface an IP address. - - - - Note that the IP address you assign to the host end of the tap device - must be different than the IP you assign to the eth device inside UML. - If you are short on IPs and don't want to consume two per UML, then - you can reuse the host's eth IP address for the host ends of the tap - devices. Internally, the UMLs must still get unique IPs for their eth - devices. You can also give the UMLs non-routable IPs (192.168.x.x or - 10.x.x.x) and have the host masquerade them. This will let outgoing - connections work, but incoming connections won't without more work, - such as port forwarding from the host. - Also note that when you configure the host side of an interface, it is - only acting as a gateway. It will respond to pings sent to it - locally, but is not useful to do that since it's a host interface. - You are not talking to the UML when you ping that interface and get a - response. - - - You can also add devices to a UML and remove them at runtime. See the - :ref:`The_Management_Console` page for details. - - - The sections below describe this in more detail. - - - Once you've decided how you're going to set up the devices, you boot - UML, log in, configure the UML side of the devices, and set up routes - to the outside world. At that point, you will be able to talk to any - other machines, physical or virtual, on the net. - - - If ifconfig inside UML fails and the network refuses to come up, run - tell you what went wrong. - - - -6.2. Userspace daemons ------------------------ - - You will likely need the setuid helper, or the switch daemon, or both. - They are both installed with the RPM and deb, so if you've installed - either, you can skip the rest of this section. - - - If not, then you need to check them out of CVS, build them, and - install them. The helper is uml_net, in CVS /tools/uml_net, and the - daemon is uml_switch, in CVS /tools/uml_router. They are both built - with a plain 'make'. Both need to be installed in a directory that's - in your path - /usr/bin is recommend. On top of that, uml_net needs - to be setuid root. - - - -6.3. Specifying ethernet addresses ------------------------------------ - - Below, you will see that the TUN/TAP, ethertap, and daemon interfaces - allow you to specify hardware addresses for the virtual ethernet - devices. This is generally not necessary. If you don't have a - specific reason to do it, you probably shouldn't. If one is not - specified on the command line, the driver will assign one based on the - device IP address. It will provide the address fe:fd:nn:nn:nn:nn - where nn.nn.nn.nn is the device IP address. This is nearly always - sufficient to guarantee a unique hardware address for the device. A - couple of exceptions are: - - - Another set of virtual ethernet devices are on the same network and - they are assigned hardware addresses using a different scheme which - may conflict with the UML IP address-based scheme - - - You aren't going to use the device for IP networking, so you don't - assign the device an IP address - - If you let the driver provide the hardware address, you should make - sure that the device IP address is known before the interface is - brought up. So, inside UML, this will guarantee that:: - - - - UML# - ifconfig eth0 192.168.0.250 up - - - - - If you decide to assign the hardware address yourself, make sure that - the first byte of the address is even. Addresses with an odd first - byte are broadcast addresses, which you don't want assigned to a - device. - - - -6.4. UML interface setup -------------------------- - - Once the network devices have been described on the command line, you - should boot UML and log in. - - - The first thing to do is bring the interface up:: - - - UML# ifconfig ethn ip-address up - - - - - You should be able to ping the host at this point. - - - To reach the rest of the world, you should set a default route to the - host:: - - - UML# route add default gw host ip - - - - - Again, with host ip of 192.168.0.4:: - - - UML# route add default gw 192.168.0.4 - - - - - This page used to recommend setting a network route to your local net. - This is wrong, because it will cause UML to try to figure out hardware - addresses of the local machines by arping on the interface to the - host. Since that interface is basically a single strand of ethernet - with two nodes on it (UML and the host) and arp requests don't cross - networks, they will fail to elicit any responses. So, what you want - is for UML to just blindly throw all packets at the host and let it - figure out what to do with them, which is what leaving out the network - route and adding the default route does. - - - Note: If you can't communicate with other hosts on your physical - ethernet, it's probably because of a network route that's - automatically set up. If you run 'route -n' and see a route that - looks like this:: - - - - - Destination Gateway Genmask Flags Metric Ref Use Iface - 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 - - - - - with a mask that's not 255.255.255.255, then replace it with a route - to your host:: - - - UML# - route del -net 192.168.0.0 dev eth0 netmask 255.255.255.0 - - - UML# - route add -host 192.168.0.4 dev eth0 - - - - - This, plus the default route to the host, will allow UML to exchange - packets with any machine on your ethernet. - - - -6.5. Multicast ---------------- - - The simplest way to set up a virtual network between multiple UMLs is - to use the mcast transport. This was written by Harald Welte and is - present in UML version 2.4.5-5um and later. Your system must have - multicast enabled in the kernel and there must be a multicast-capable - network device on the host. Normally, this is eth0, but if there is - no ethernet card on the host, then you will likely get strange error - messages when you bring the device up inside UML. - - - To use it, run two UMLs with:: - - - eth0=mcast - - - - - on their command lines. Log in, configure the ethernet device in each - machine with different IP addresses:: - - - UML1# ifconfig eth0 192.168.0.254 - - - UML2# ifconfig eth0 192.168.0.253 - - - - - and they should be able to talk to each other. - - The full set of command line options for this transport are:: - - - - ethn=mcast,ethernet address,multicast - address,multicast port,ttl - - - - There is also a related point-to-point only "ucast" transport. - This is useful when your network does not support multicast, and - all network connections are simple point to point links. - - The full set of command line options for this transport are:: - - - ethn=ucast,ethernet address,remote address,listen port,remote port - - - - -6.6. TUN/TAP with the uml_net helper -------------------------------------- - - TUN/TAP is the preferred mechanism on 2.4 to exchange packets with the - host. The TUN/TAP backend has been in UML since 2.4.9-3um. - - - The easiest way to get up and running is to let the setuid uml_net - helper do the host setup for you. This involves insmod-ing the tun.o - module if necessary, configuring the device, and setting up IP - forwarding, routing, and proxy arp. If you are new to UML networking, - do this first. If you're concerned about the security implications of - the setuid helper, use it to get up and running, then read the next - section to see how to have UML use a preconfigured tap device, which - avoids the use of uml_net. - - - If you specify an IP address for the host side of the device, the - uml_net helper will do all necessary setup on the host - the only - requirement is that TUN/TAP be available, either built in to the host - kernel or as the tun.o module. - - The format of the command line switch to attach a device to a TUN/TAP - device is:: - - - eth <n> =tuntap,,, <IP address> - - - - - For example, this argument will attach the UML's eth0 to the next - available tap device and assign an ethernet address to it based on its - IP address:: - - - eth0=tuntap,,,192.168.0.254 - - - - - - - Note that the IP address that must be used for the eth device inside - UML is fixed by the routing and proxy arp that is set up on the - TUN/TAP device on the host. You can use a different one, but it won't - work because reply packets won't reach the UML. This is a feature. - It prevents a nasty UML user from doing things like setting the UML IP - to the same as the network's nameserver or mail server. - - - There are a couple potential problems with running the TUN/TAP - transport on a 2.4 host kernel - - - TUN/TAP seems not to work on 2.4.3 and earlier. Upgrade the host - kernel or use the ethertap transport. - - - With an upgraded kernel, TUN/TAP may fail with:: - - - File descriptor in bad state - - - - - This is due to a header mismatch between the upgraded kernel and the - kernel that was originally installed on the machine. The fix is to - make sure that /usr/src/linux points to the headers for the running - kernel. - - These were pointed out by Tim Robinson <timro at trkr dot net> in the past. - - - -6.7. TUN/TAP with a preconfigured tap device ---------------------------------------------- - - If you prefer not to have UML use uml_net (which is somewhat - insecure), with UML 2.4.17-11, you can set up a TUN/TAP device - beforehand. The setup needs to be done as root, but once that's done, - there is no need for root assistance. Setting up the device is done - as follows: - - - Create the device with tunctl (available from the UML utilities - tarball):: - - - - - host# tunctl -u uid - - - - - where uid is the user id or username that UML will be run as. This - will tell you what device was created. - - - Configure the device IP (change IP addresses and device name to - suit):: - - - - - host# ifconfig tap0 192.168.0.254 up - - - - - - - Set up routing and arping if desired - this is my recipe, there are - other ways of doing the same thing:: - - - host# - bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward' - - host# - route add -host 192.168.0.253 dev tap0 - - host# - bash -c 'echo 1 > /proc/sys/net/ipv4/conf/tap0/proxy_arp' - - host# - arp -Ds 192.168.0.253 eth0 pub - - - - - Note that this must be done every time the host boots - this configu- - ration is not stored across host reboots. So, it's probably a good - idea to stick it in an rc file. An even better idea would be a little - utility which reads the information from a config file and sets up - devices at boot time. - - - Rather than using up two IPs and ARPing for one of them, you can - also provide direct access to your LAN by the UML by using a - bridge:: - - - host# - brctl addbr br0 - - - host# - ifconfig eth0 0.0.0.0 promisc up - - - host# - ifconfig tap0 0.0.0.0 promisc up - - - host# - ifconfig br0 192.168.0.1 netmask 255.255.255.0 up - - - host# - brctl stp br0 off - - - host# - brctl setfd br0 1 - - - host# - brctl sethello br0 1 - - - host# - brctl addif br0 eth0 - - - host# - brctl addif br0 tap0 - - - - - Note that 'br0' should be setup using ifconfig with the existing IP - address of eth0, as eth0 no longer has its own IP. - - - - - - Also, the /dev/net/tun device must be writable by the user running - UML in order for the UML to use the device that's been configured - for it. The simplest thing to do is:: - - - host# chmod 666 /dev/net/tun - - - - - Making it world-writable looks bad, but it seems not to be - exploitable as a security hole. However, it does allow anyone to cre- - ate useless tap devices (useless because they can't configure them), - which is a DOS attack. A somewhat more secure alternative would to be - to create a group containing all the users who have preconfigured tap - devices and chgrp /dev/net/tun to that group with mode 664 or 660. - - - - Once the device is set up, run UML with 'eth0=tuntap,device name' - (i.e. 'eth0=tuntap,tap0') on the command line (or do it with the - mconsole config command). - - - Bring the eth device up in UML and you're in business. - - If you don't want that tap device any more, you can make it non- - persistent with:: - - - host# tunctl -d tap device - - - - - Finally, tunctl has a -b (for brief mode) switch which causes it to - output only the name of the tap device it created. This makes it - suitable for capture by a script:: - - - host# TAP=`tunctl -u 1000 -b` - - - - - - -6.8. Ethertap --------------- - - Ethertap is the general mechanism on 2.2 for userspace processes to - exchange packets with the kernel. - - - - To use this transport, you need to describe the virtual network device - on the UML command line. The general format for this is:: - - - eth <n> =ethertap, <device> , <ethernet address> , <tap IP address> - - - - - So, the previous example:: - - - eth0=ethertap,tap0,fe:fd:0:0:0:1,192.168.0.254 - - - - - attaches the UML eth0 device to the host /dev/tap0, assigns it the - ethernet address fe:fd:0:0:0:1, and assigns the IP address - 192.168.0.254 to the tap device. - - - - The tap device is mandatory, but the others are optional. If the - ethernet address is omitted, one will be assigned to it. - - - The presence of the tap IP address will cause the helper to run and do - whatever host setup is needed to allow the virtual machine to - communicate with the outside world. If you're not sure you know what - you're doing, this is the way to go. - - - If it is absent, then you must configure the tap device and whatever - arping and routing you will need on the host. However, even in this - case, the uml_net helper still needs to be in your path and it must be - setuid root if you're not running UML as root. This is because the - tap device doesn't support SIGIO, which UML needs in order to use - something as a source of input. So, the helper is used as a - convenient asynchronous IO thread. - - If you're using the uml_net helper, you can ignore the following host - setup - uml_net will do it for you. You just need to make sure you - have ethertap available, either built in to the host kernel or - available as a module. - - - If you want to set things up yourself, you need to make sure that the - appropriate /dev entry exists. If it doesn't, become root and create - it as follows:: - - - mknod /dev/tap <minor> c 36 <minor> + 16 - - - - - For example, this is how to create /dev/tap0:: - - - mknod /dev/tap0 c 36 0 + 16 - - - - - You also need to make sure that the host kernel has ethertap support. - If ethertap is enabled as a module, you apparently need to insmod - ethertap once for each ethertap device you want to enable. So,:: - - - host# - insmod ethertap - - - - - will give you the tap0 interface. To get the tap1 interface, you need - to run:: - - - host# - insmod ethertap unit=1 -o ethertap1 - - - - - - - -6.9. The switch daemon ------------------------ - - Note: This is the daemon formerly known as uml_router, but which was - renamed so the network weenies of the world would stop growling at me. - - - The switch daemon, uml_switch, provides a mechanism for creating a - totally virtual network. By default, it provides no connection to the - host network (but see -tap, below). - - - The first thing you need to do is run the daemon. Running it with no - arguments will make it listen on a default pair of unix domain - sockets. - - - If you want it to listen on a different pair of sockets, use:: - - - -unix control socket data socket - - - - - - If you want it to act as a hub rather than a switch, use:: - - - -hub - - - - - - If you want the switch to be connected to host networking (allowing - the umls to get access to the outside world through the host), use:: - - - -tap tap0 - - - - - - Note that the tap device must be preconfigured (see "TUN/TAP with a - preconfigured tap device", above). If you're using a different tap - device than tap0, specify that instead of tap0. - - - uml_switch can be backgrounded as follows:: - - - host% - uml_switch [ options ] < /dev/null > /dev/null - - - - - The reason it doesn't background by default is that it listens to - stdin for EOF. When it sees that, it exits. - - - The general format of the kernel command line switch is:: - - - - ethn=daemon,ethernet address,socket - type,control socket,data socket - - - - - You can leave off everything except the 'daemon'. You only need to - specify the ethernet address if the one that will be assigned to it - isn't acceptable for some reason. The rest of the arguments describe - how to communicate with the daemon. You should only specify them if - you told the daemon to use different sockets than the default. So, if - you ran the daemon with no arguments, running the UML on the same - machine with:: - - eth0=daemon - - - - - will cause the eth0 driver to attach itself to the daemon correctly. - - - -6.10. Slip ------------ - - Slip is another, less general, mechanism for a process to communicate - with the host networking. In contrast to the ethertap interface, - which exchanges ethernet frames with the host and can be used to - transport any higher-level protocol, it can only be used to transport - IP. - - - The general format of the command line switch is:: - - - - ethn=slip,slip IP - - - - - The slip IP argument is the IP address that will be assigned to the - host end of the slip device. If it is specified, the helper will run - and will set up the host so that the virtual machine can reach it and - the rest of the network. - - - There are some oddities with this interface that you should be aware - of. You should only specify one slip device on a given virtual - machine, and its name inside UML will be 'umn', not 'eth0' or whatever - you specified on the command line. These problems will be fixed at - some point. - - - -6.11. Slirp ------------- - - slirp uses an external program, usually /usr/bin/slirp, to provide IP - only networking connectivity through the host. This is similar to IP - masquerading with a firewall, although the translation is performed in - user-space, rather than by the kernel. As slirp does not set up any - interfaces on the host, or changes routing, slirp does not require - root access or setuid binaries on the host. - - - The general format of the command line switch for slirp is:: - - - - ethn=slirp,ethernet address,slirp path - - - - - The ethernet address is optional, as UML will set up the interface - with an ethernet address based upon the initial IP address of the - interface. The slirp path is generally /usr/bin/slirp, although it - will depend on distribution. - - - The slirp program can have a number of options passed to the command - line and we can't add them to the UML command line, as they will be - parsed incorrectly. Instead, a wrapper shell script can be written or - the options inserted into the /.slirprc file. More information on - all of the slirp options can be found in its man pages. - - - The eth0 interface on UML should be set up with the IP 10.2.0.15, - although you can use anything as long as it is not used by a network - you will be connecting to. The default route on UML should be set to - use:: - - - UML# - route add default dev eth0 - - - - - slirp provides a number of useful IP addresses which can be used by - UML, such as 10.0.2.3 which is an alias for the DNS server specified - in /etc/resolv.conf on the host or the IP given in the 'dns' option - for slirp. - - - Even with a baudrate setting higher than 115200, the slirp connection - is limited to 115200. If you need it to go faster, the slirp binary - needs to be compiled with FULL_BOLT defined in config.h. - - - -6.12. pcap ------------ - - The pcap transport is attached to a UML ethernet device on the command - line or with uml_mconsole with the following syntax:: - - - - ethn=pcap,host interface,filter - expression,option1,option2 - - - - - The expression and options are optional. - - - The interface is whatever network device on the host you want to - sniff. The expression is a pcap filter expression, which is also what - tcpdump uses, so if you know how to specify tcpdump filters, you will - use the same expressions here. The options are up to two of - 'promisc', control whether pcap puts the host interface into - promiscuous mode. 'optimize' and 'nooptimize' control whether the pcap - expression optimizer is used. - - - Example:: - - - - eth0=pcap,eth0,tcp - - eth1=pcap,eth0,!tcp - - - - will cause the UML eth0 to emit all tcp packets on the host eth0 and - the UML eth1 to emit all non-tcp packets on the host eth0. - - - -6.13. Setting up the host yourself ------------------------------------ - - If you don't specify an address for the host side of the ethertap or - slip device, UML won't do any setup on the host. So this is what is - needed to get things working (the examples use a host-side IP of - 192.168.0.251 and a UML-side IP of 192.168.0.250 - adjust to suit your - own network): - - - The device needs to be configured with its IP address. Tap devices - are also configured with an mtu of 1484. Slip devices are - configured with a point-to-point address pointing at the UML ip - address:: - - - host# ifconfig tap0 arp mtu 1484 192.168.0.251 up - - - host# - ifconfig sl0 192.168.0.251 pointopoint 192.168.0.250 up - - - - - - - If a tap device is being set up, a route is set to the UML IP:: - - - UML# route add -host 192.168.0.250 gw 192.168.0.251 - - - - - - - To allow other hosts on your network to see the virtual machine, - proxy arp is set up for it:: - - - host# arp -Ds 192.168.0.250 eth0 pub - - - - - - - Finally, the host is set up to route packets:: - - - host# echo 1 > /proc/sys/net/ipv4/ip_forward - - - - - - - - - - -7. Sharing Filesystems between Virtual Machines -================================================ - - - - -7.1. A warning ---------------- - - Don't attempt to share filesystems simply by booting two UMLs from the - same file. That's the same thing as booting two physical machines - from a shared disk. It will result in filesystem corruption. - - - -7.2. Using layered block devices ---------------------------------- - - The way to share a filesystem between two virtual machines is to use - the copy-on-write (COW) layering capability of the ubd block driver. - As of 2.4.6-2um, the driver supports layering a read-write private - device over a read-only shared device. A machine's writes are stored - in the private device, while reads come from either device - the - private one if the requested block is valid in it, the shared one if - not. Using this scheme, the majority of data which is unchanged is - shared between an arbitrary number of virtual machines, each of which - has a much smaller file containing the changes that it has made. With - a large number of UMLs booting from a large root filesystem, this - leads to a huge disk space saving. It will also help performance, - since the host will be able to cache the shared data using a much - smaller amount of memory, so UML disk requests will be served from the - host's memory rather than its disks. - - - - - To add a copy-on-write layer to an existing block device file, simply - add the name of the COW file to the appropriate ubd switch:: - - - ubd0=root_fs_cow,root_fs_debian_22 - - - - - where 'root_fs_cow' is the private COW file and 'root_fs_debian_22' is - the existing shared filesystem. The COW file need not exist. If it - doesn't, the driver will create and initialize it. Once the COW file - has been initialized, it can be used on its own on the command line:: - - - ubd0=root_fs_cow - - - - - The name of the backing file is stored in the COW file header, so it - would be redundant to continue specifying it on the command line. - - - -7.3. Note! ------------ - - When checking the size of the COW file in order to see the gobs of - space that you're saving, make sure you use 'ls -ls' to see the actual - disk consumption rather than the length of the file. The COW file is - sparse, so the length will be very different from the disk usage. - Here is a 'ls -l' of a COW file and backing file from one boot and - shutdown:: - - host% ls -l cow.debian debian2.2 - -rw-r--r-- 1 jdike jdike 492504064 Aug 6 21:16 cow.debian - -rwxrw-rw- 1 jdike jdike 537919488 Aug 6 20:42 debian2.2 - - - - - Doesn't look like much saved space, does it? Well, here's 'ls -ls':: - - - host% ls -ls cow.debian debian2.2 - 880 -rw-r--r-- 1 jdike jdike 492504064 Aug 6 21:16 cow.debian - 525832 -rwxrw-rw- 1 jdike jdike 537919488 Aug 6 20:42 debian2.2 - - - - - Now, you can see that the COW file has less than a meg of disk, rather - than 492 meg. - - - -7.4. Another warning ---------------------- - - Once a filesystem is being used as a readonly backing file for a COW - file, do not boot directly from it or modify it in any way. Doing so - will invalidate any COW files that are using it. The mtime and size - of the backing file are stored in the COW file header at its creation, - and they must continue to match. If they don't, the driver will - refuse to use the COW file. - - - - - If you attempt to evade this restriction by changing either the - backing file or the COW header by hand, you will get a corrupted - filesystem. - - - - - Among other things, this means that upgrading the distribution in a - backing file and expecting that all of the COW files using it will see - the upgrade will not work. - - - - -7.5. uml_moo : Merging a COW file with its backing file --------------------------------------------------------- - - Depending on how you use UML and COW devices, it may be advisable to - merge the changes in the COW file into the backing file every once in - a while. - - - - - The utility that does this is uml_moo. Its usage is:: - - - host% uml_moo COW file new backing file - - - - - There's no need to specify the backing file since that information is - already in the COW file header. If you're paranoid, boot the new - merged file, and if you're happy with it, move it over the old backing - file. - - - - - uml_moo creates a new backing file by default as a safety measure. It - also has a destructive merge option which will merge the COW file - directly into its current backing file. This is really only usable - when the backing file only has one COW file associated with it. If - there are multiple COWs associated with a backing file, a -d merge of - one of them will invalidate all of the others. However, it is - convenient if you're short of disk space, and it should also be - noticeably faster than a non-destructive merge. - - - - - uml_moo is installed with the UML deb and RPM. If you didn't install - UML from one of those packages, you can also get it from the UML - utilities http://user-mode-linux.sourceforge.net/utilities tar file - in tools/moo. - - - - - - - - -8. Creating filesystems -======================== - - - You may want to create and mount new UML filesystems, either because - your root filesystem isn't large enough or because you want to use a - filesystem other than ext2. - - - This was written on the occasion of reiserfs being included in the - 2.4.1 kernel pool, and therefore the 2.4.1 UML, so the examples will - talk about reiserfs. This information is generic, and the examples - should be easy to translate to the filesystem of your choice. - - -8.1. Create the filesystem file -================================ - - dd is your friend. All you need to do is tell dd to create an empty - file of the appropriate size. I usually make it sparse to save time - and to avoid allocating disk space until it's actually used. For - example, the following command will create a sparse 100 meg file full - of zeroes:: - - - host% - dd if=/dev/zero of=new_filesystem seek=100 count=1 bs=1M - - - - - - - 8.2. Assign the file to a UML device - - Add an argument like the following to the UML command line:: - - ubd4=new_filesystem - - - - - making sure that you use an unassigned ubd device number. - - - - 8.3. Creating and mounting the filesystem - - Make sure that the filesystem is available, either by being built into - the kernel, or available as a module, then boot up UML and log in. If - the root filesystem doesn't have the filesystem utilities (mkfs, fsck, - etc), then get them into UML by way of the net or hostfs. - - - Make the new filesystem on the device assigned to the new file:: - - - host# mkreiserfs /dev/ubd/4 - - - <----------- MKREISERFSv2 -----------> - - ReiserFS version 3.6.25 - Block size 4096 bytes - Block count 25856 - Used blocks 8212 - Journal - 8192 blocks (18-8209), journal header is in block 8210 - Bitmaps: 17 - Root block 8211 - Hash function "r5" - ATTENTION: ALL DATA WILL BE LOST ON '/dev/ubd/4'! (y/n)y - journal size 8192 (from 18) - Initializing journal - 0%....20%....40%....60%....80%....100% - Syncing..done. - - - - - Now, mount it:: - - - UML# - mount /dev/ubd/4 /mnt - - - - - and you're in business. - - - - - - - - - -9. Host file access -==================== - - - If you want to access files on the host machine from inside UML, you - can treat it as a separate machine and either nfs mount directories - from the host or copy files into the virtual machine with scp or rcp. - However, since UML is running on the host, it can access those - files just like any other process and make them available inside the - virtual machine without needing to use the network. - - - This is now possible with the hostfs virtual filesystem. With it, you - can mount a host directory into the UML filesystem and access the - files contained in it just as you would on the host. - - -9.1. Using hostfs ------------------- - - To begin with, make sure that hostfs is available inside the virtual - machine with:: - - - UML# cat /proc/filesystems - - - - . hostfs should be listed. If it's not, either rebuild the kernel - with hostfs configured into it or make sure that hostfs is built as a - module and available inside the virtual machine, and insmod it. - - - Now all you need to do is run mount:: - - - UML# mount none /mnt/host -t hostfs - - - - - will mount the host's / on the virtual machine's /mnt/host. - - - If you don't want to mount the host root directory, then you can - specify a subdirectory to mount with the -o switch to mount:: - - - UML# mount none /mnt/home -t hostfs -o /home - - - - - will mount the hosts's /home on the virtual machine's /mnt/home. - - - -9.2. hostfs as the root filesystem ------------------------------------ - - It's possible to boot from a directory hierarchy on the host using - hostfs rather than using the standard filesystem in a file. - - To start, you need that hierarchy. The easiest way is to loop mount - an existing root_fs file:: - - - host# mount root_fs uml_root_dir -o loop - - - - - You need to change the filesystem type of / in etc/fstab to be - 'hostfs', so that line looks like this:: - - /dev/ubd/0 / hostfs defaults 1 1 - - - - - Then you need to chown to yourself all the files in that directory - that are owned by root. This worked for me:: - - - host# find . -uid 0 -exec chown jdike {} \; - - - - - Next, make sure that your UML kernel has hostfs compiled in, not as a - module. Then run UML with the boot device pointing at that directory:: - - - ubd0=/path/to/uml/root/directory - - - - - UML should then boot as it does normally. - - -9.3. Building hostfs ---------------------- - - If you need to build hostfs because it's not in your kernel, you have - two choices: - - - - - Compiling hostfs into the kernel: - - - Reconfigure the kernel and set the 'Host filesystem' option under - - - - Compiling hostfs as a module: - - - Reconfigure the kernel and set the 'Host filesystem' option under - be in arch/um/fs/hostfs/hostfs.o. Install that in - ``/lib/modules/$(uname -r)/fs`` in the virtual machine, boot it up, and:: - - - UML# insmod hostfs - - -.. _The_Management_Console: - -10. The Management Console -=========================== - - - - The UML management console is a low-level interface to the kernel, - somewhat like the i386 SysRq interface. Since there is a full-blown - operating system under UML, there is much greater flexibility possible - than with the SysRq mechanism. - - - There are a number of things you can do with the mconsole interface: - - - get the kernel version - - - add and remove devices - - - halt or reboot the machine - - - Send SysRq commands - - - Pause and resume the UML - - - You need the mconsole client (uml_mconsole) which is present in CVS - (/tools/mconsole) in 2.4.5-9um and later, and will be in the RPM in - 2.4.6. - - - You also need CONFIG_MCONSOLE (under 'General Setup') enabled in UML. - When you boot UML, you'll see a line like:: - - - mconsole initialized on /home/jdike/.uml/umlNJ32yL/mconsole - - - - - If you specify a unique machine id one the UML command line, i.e.:: - - - umid=debian - - - - - you'll see this:: - - - mconsole initialized on /home/jdike/.uml/debian/mconsole - - - - - That file is the socket that uml_mconsole will use to communicate with - UML. Run it with either the umid or the full path as its argument:: - - - host% uml_mconsole debian - - - - - or:: - - - host% uml_mconsole /home/jdike/.uml/debian/mconsole - - - - - You'll get a prompt, at which you can run one of these commands: - - - version - - - halt - - - reboot - - - config - - - remove - - - sysrq - - - help - - - cad - - - stop - - - go - - -10.1. version --------------- - - This takes no arguments. It prints the UML version:: - - - (mconsole) version - OK Linux usermode 2.4.5-9um #1 Wed Jun 20 22:47:08 EDT 2001 i686 - - - - - There are a couple actual uses for this. It's a simple no-op which - can be used to check that a UML is running. It's also a way of - sending an interrupt to the UML. This is sometimes useful on SMP - hosts, where there's a bug which causes signals to UML to be lost, - often causing it to appear to hang. Sending such a UML the mconsole - version command is a good way to 'wake it up' before networking has - been enabled, as it does not do anything to the function of the UML. - - - -10.2. halt and reboot ----------------------- - - These take no arguments. They shut the machine down immediately, with - no syncing of disks and no clean shutdown of userspace. So, they are - pretty close to crashing the machine:: - - - (mconsole) halt - OK - - - - - - -10.3. config -------------- - - "config" adds a new device to the virtual machine. Currently the ubd - and network drivers support this. It takes one argument, which is the - device to add, with the same syntax as the kernel command line:: - - - - - (mconsole) - config ubd3=/home/jdike/incoming/roots/root_fs_debian22 - - OK - (mconsole) config eth1=mcast - OK - - - - - - -10.4. remove -------------- - - "remove" deletes a device from the system. Its argument is just the - name of the device to be removed. The device must be idle in whatever - sense the driver considers necessary. In the case of the ubd driver, - the removed block device must not be mounted, swapped on, or otherwise - open, and in the case of the network driver, the device must be down:: - - - (mconsole) remove ubd3 - OK - (mconsole) remove eth1 - OK - - - - - - -10.5. sysrq ------------- - - This takes one argument, which is a single letter. It calls the - generic kernel's SysRq driver, which does whatever is called for by - that argument. See the SysRq documentation in - Documentation/admin-guide/sysrq.rst in your favorite kernel tree to - see what letters are valid and what they do. - - - -10.6. help ------------ - - "help" returns a string listing the valid commands and what each one - does. - - - -10.7. cad ----------- - - This invokes the Ctl-Alt-Del action on init. What exactly this ends - up doing is up to /etc/inittab. Normally, it reboots the machine. - With UML, this is usually not desired, so if a halt would be better, - then find the section of inittab that looks like this:: - - - # What to do when CTRL-ALT-DEL is pressed. - ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now - - - - - and change the command to halt. - - - -10.8. stop ------------ - - This puts the UML in a loop reading mconsole requests until a 'go' - mconsole command is received. This is very useful for making backups - of UML filesystems, as the UML can be stopped, then synced via 'sysrq - s', so that everything is written to the filesystem. You can then copy - the filesystem and then send the UML 'go' via mconsole. - - - Note that a UML running with more than one CPU will have problems - after you send the 'stop' command, as only one CPU will be held in a - mconsole loop and all others will continue as normal. This is a bug, - and will be fixed. - - - -10.9. go ---------- - - This resumes a UML after being paused by a 'stop' command. Note that - when the UML has resumed, TCP connections may have timed out and if - the UML is paused for a long period of time, crond might go a little - crazy, running all the jobs it didn't do earlier. - - - - - - -.. _Kernel_debugging: - -11. Kernel debugging -===================== - - - Note: The interface that makes debugging, as described here, possible - is present in 2.4.0-test6 kernels and later. - - - Since the user-mode kernel runs as a normal Linux process, it is - possible to debug it with gdb almost like any other process. It is - slightly different because the kernel's threads are already being - ptraced for system call interception, so gdb can't ptrace them. - However, a mechanism has been added to work around that problem. - - - In order to debug the kernel, you need build it from source. See - :ref:`Compiling_the_kernel_and_modules` for information on doing that. - Make sure that you enable CONFIG_DEBUGSYM and CONFIG_PT_PROXY during - the config. These will compile the kernel with ``-g``, and enable the - ptrace proxy so that gdb works with UML, respectively. - - - - -11.1. Starting the kernel under gdb ------------------------------------- - - You can have the kernel running under the control of gdb from the - beginning by putting 'debug' on the command line. You will get an - xterm with gdb running inside it. The kernel will send some commands - to gdb which will leave it stopped at the beginning of start_kernel. - At this point, you can get things going with 'next', 'step', or - 'cont'. - - - There is a transcript of a debugging session here <debug- - session.html> , with breakpoints being set in the scheduler and in an - interrupt handler. - - -11.2. Examining sleeping processes ------------------------------------ - - - Not every bug is evident in the currently running process. Sometimes, - processes hang in the kernel when they shouldn't because they've - deadlocked on a semaphore or something similar. In this case, when - you ^C gdb and get a backtrace, you will see the idle thread, which - isn't very relevant. - - - What you want is the stack of whatever process is sleeping when it - shouldn't be. You need to figure out which process that is, which is - generally fairly easy. Then you need to get its host process id, - which you can do either by looking at ps on the host or at - task.thread.extern_pid in gdb. - - - Now what you do is this: - - - detach from the current thread:: - - - (UML gdb) det - - - - - - - attach to the thread you are interested in:: - - - (UML gdb) att <host pid> - - - - - - - look at its stack and anything else of interest:: - - - (UML gdb) bt - - - - - Note that you can't do anything at this point that requires that a - process execute, e.g. calling a function - - - when you're done looking at that process, reattach to the current - thread and continue it:: - - - (UML gdb) - att 1 - - - (UML gdb) - c - - - - - Here, specifying any pid which is not the process id of a UML thread - will cause gdb to reattach to the current thread. I commonly use 1, - but any other invalid pid would work. - - - -11.3. Running ddd on UML -------------------------- - - ddd works on UML, but requires a special kludge. The process goes - like this: - - - Start ddd:: - - - host% ddd linux - - - - - - - With ps, get the pid of the gdb that ddd started. You can ask the - gdb to tell you, but for some reason that confuses things and - causes a hang. - - - run UML with 'debug=parent gdb-pid=<pid>' added to the command line - - it will just sit there after you hit return - - - type 'att 1' to the ddd gdb and you will see something like:: - - - 0xa013dc51 in __kill () - - - (gdb) - - - - - - - At this point, type 'c', UML will boot up, and you can use ddd just - as you do on any other process. - - - -11.4. Debugging modules ------------------------- - - - gdb has support for debugging code which is dynamically loaded into - the process. This support is what is needed to debug kernel modules - under UML. - - - Using that support is somewhat complicated. You have to tell gdb what - object file you just loaded into UML and where in memory it is. Then, - it can read the symbol table, and figure out where all the symbols are - from the load address that you provided. It gets more interesting - when you load the module again (i.e. after an rmmod). You have to - tell gdb to forget about all its symbols, including the main UML ones - for some reason, then load then all back in again. - - - There's an easy way and a hard way to do this. The easy way is to use - the umlgdb expect script written by Chandan Kudige. It basically - automates the process for you. - - - First, you must tell it where your modules are. There is a list in - the script that looks like this:: - - set MODULE_PATHS { - "fat" "/usr/src/uml/linux-2.4.18/fs/fat/fat.o" - "isofs" "/usr/src/uml/linux-2.4.18/fs/isofs/isofs.o" - "minix" "/usr/src/uml/linux-2.4.18/fs/minix/minix.o" - } - - - - - You change that to list the names and paths of the modules that you - are going to debug. Then you run it from the toplevel directory of - your UML pool and it basically tells you what to do:: - - - ******** GDB pid is 21903 ******** - Start UML as: ./linux <kernel switches> debug gdb-pid=21903 - - - - GNU gdb 5.0rh-5 Red Hat Linux 7.1 - Copyright 2001 Free Software Foundation, Inc. - GDB is free software, covered by the GNU General Public License, and you are - welcome to change it and/or distribute copies of it under certain conditions. - Type "show copying" to see the conditions. - There is absolutely no warranty for GDB. Type "show warranty" for details. - This GDB was configured as "i386-redhat-linux"... - (gdb) b sys_init_module - Breakpoint 1 at 0xa0011923: file module.c, line 349. - (gdb) att 1 - - - - - After you run UML and it sits there doing nothing, you hit return at - the 'att 1' and continue it:: - - - Attaching to program: /home/jdike/linux/2.4/um/./linux, process 1 - 0xa00f4221 in __kill () - (UML gdb) c - Continuing. - - - - - At this point, you debug normally. When you insmod something, the - expect magic will kick in and you'll see something like:: - - - *** Module hostfs loaded *** - Breakpoint 1, sys_init_module (name_user=0x805abb0 "hostfs", - mod_user=0x8070e00) at module.c:349 - 349 char *name, *n_name, *name_tmp = NULL; - (UML gdb) finish - Run till exit from #0 sys_init_module (name_user=0x805abb0 "hostfs", - mod_user=0x8070e00) at module.c:349 - 0xa00e2e23 in execute_syscall (r=0xa8140284) at syscall_kern.c:411 - 411 else res = EXECUTE_SYSCALL(syscall, regs); - Value returned is $1 = 0 - (UML gdb) - p/x (int)module_list + module_list->size_of_struct - - $2 = 0xa9021054 - (UML gdb) symbol-file ./linux - Load new symbol table from "./linux"? (y or n) y - Reading symbols from ./linux... - done. - (UML gdb) - add-symbol-file /home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o 0xa9021054 - - add symbol table from file "/home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o" at - .text_addr = 0xa9021054 - (y or n) y - - Reading symbols from /home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o... - done. - (UML gdb) p *module_list - $1 = {size_of_struct = 84, next = 0xa0178720, name = 0xa9022de0 "hostfs", - size = 9016, uc = {usecount = {counter = 0}, pad = 0}, flags = 1, - nsyms = 57, ndeps = 0, syms = 0xa9023170, deps = 0x0, refs = 0x0, - init = 0xa90221f0 <init_hostfs>, cleanup = 0xa902222c <exit_hostfs>, - ex_table_start = 0x0, ex_table_end = 0x0, persist_start = 0x0, - persist_end = 0x0, can_unload = 0, runsize = 0, kallsyms_start = 0x0, - kallsyms_end = 0x0, - archdata_start = 0x1b855 <Address 0x1b855 out of bounds>, - archdata_end = 0xe5890000 <Address 0xe5890000 out of bounds>, - kernel_data = 0xf689c35d <Address 0xf689c35d out of bounds>} - >> Finished loading symbols for hostfs ... - - - - - That's the easy way. It's highly recommended. The hard way is - described below in case you're interested in what's going on. - - - Boot the kernel under the debugger and load the module with insmod or - modprobe. With gdb, do:: - - - (UML gdb) p module_list - - - - - This is a list of modules that have been loaded into the kernel, with - the most recently loaded module first. Normally, the module you want - is at module_list. If it's not, walk down the next links, looking at - the name fields until find the module you want to debug. Take the - address of that structure, and add module.size_of_struct (which in - 2.4.10 kernels is 96 (0x60)) to it. Gdb can make this hard addition - for you :-):: - - - - (UML gdb) - printf "%#x\n", (int)module_list module_list->size_of_struct - - - - - The offset from the module start occasionally changes (before 2.4.0, - it was module.size_of_struct + 4), so it's a good idea to check the - init and cleanup addresses once in a while, as describe below. Now - do:: - - - (UML gdb) - add-symbol-file /path/to/module/on/host that_address - - - - - Tell gdb you really want to do it, and you're in business. - - - If there's any doubt that you got the offset right, like breakpoints - appear not to work, or they're appearing in the wrong place, you can - check it by looking at the module structure. The init and cleanup - fields should look like:: - - - init = 0x588066b0 <init_hostfs>, cleanup = 0x588066c0 <exit_hostfs> - - - - - with no offsets on the symbol names. If the names are right, but they - are offset, then the offset tells you how much you need to add to the - address you gave to add-symbol-file. - - - When you want to load in a new version of the module, you need to get - gdb to forget about the old one. The only way I've found to do that - is to tell gdb to forget about all symbols that it knows about:: - - - (UML gdb) symbol-file - - - - - Then reload the symbols from the kernel binary:: - - - (UML gdb) symbol-file /path/to/kernel - - - - - and repeat the process above. You'll also need to re-enable break- - points. They were disabled when you dumped all the symbols because - gdb couldn't figure out where they should go. - - - -11.5. Attaching gdb to the kernel ----------------------------------- - - If you don't have the kernel running under gdb, you can attach gdb to - it later by sending the tracing thread a SIGUSR1. The first line of - the console output identifies its pid:: - - tracing thread pid = 20093 - - - - - When you send it the signal:: - - - host% kill -USR1 20093 - - - - - you will get an xterm with gdb running in it. - - - If you have the mconsole compiled into UML, then the mconsole client - can be used to start gdb:: - - - (mconsole) (mconsole) config gdb=xterm - - - - - will fire up an xterm with gdb running in it. - - - -11.6. Using alternate debuggers --------------------------------- - - UML has support for attaching to an already running debugger rather - than starting gdb itself. This is present in CVS as of 17 Apr 2001. - I sent it to Alan for inclusion in the ac tree, and it will be in my - 2.4.4 release. - - - This is useful when gdb is a subprocess of some UI, such as emacs or - ddd. It can also be used to run debuggers other than gdb on UML. - Below is an example of using strace as an alternate debugger. - - - To do this, you need to get the pid of the debugger and pass it in - with the - - - If you are using gdb under some UI, then tell it to 'att 1', and - you'll find yourself attached to UML. - - - If you are using something other than gdb as your debugger, then - you'll need to get it to do the equivalent of 'att 1' if it doesn't do - it automatically. - - - An example of an alternate debugger is strace. You can strace the - actual kernel as follows: - - - Run the following in a shell:: - - - host% - sh -c 'echo pid=$$; echo -n hit return; read x; exec strace -p 1 -o strace.out' - - - - - Run UML with 'debug' and 'gdb-pid=<pid>' with the pid printed out - by the previous command - - - Hit return in the shell, and UML will start running, and strace - output will start accumulating in the output file. - - Note that this is different from running:: - - - host% strace ./linux - - - - - That will strace only the main UML thread, the tracing thread, which - doesn't do any of the actual kernel work. It just oversees the vir- - tual machine. In contrast, using strace as described above will show - you the low-level activity of the virtual machine. - - - - - -12. Kernel debugging examples -============================== - -12.1. The case of the hung fsck --------------------------------- - - When booting up the kernel, fsck failed, and dropped me into a shell - to fix things up. I ran fsck -y, which hung:: - - - Setting hostname uml [ OK ] - Checking root filesystem - /dev/fhd0 was not cleanly unmounted, check forced. - Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. - - /dev/fhd0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. - (i.e., without -a or -p options) - [ FAILED ] - - *** An error occurred during the file system check. - *** Dropping you to a shell; the system will reboot - *** when you leave the shell. - Give root password for maintenance - (or type Control-D for normal startup): - - [root@uml /root]# fsck -y /dev/fhd0 - fsck -y /dev/fhd0 - Parallelizing fsck version 1.14 (9-Jan-1999) - e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09 - /dev/fhd0 contains a file system with errors, check forced. - Pass 1: Checking inodes, blocks, and sizes - Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. Ignore error? yes - - Inode 19780, i_blocks is 1548, should be 540. Fix? yes - - Pass 2: Checking directory structure - Error reading block 49405 (Attempt to read block from filesystem resulted in short read). Ignore error? yes - - Directory inode 11858, block 0, offset 0: directory corrupted - Salvage? yes - - Missing '.' in directory inode 11858. - Fix? yes - - Missing '..' in directory inode 11858. - Fix? yes - - - The standard drill in this sort of situation is to fire up gdb on the - signal thread, which, in this case, was pid 1935. In another window, - I run gdb and attach pid 1935:: - - - ~/linux/2.3.26/um 1016: gdb linux - GNU gdb 4.17.0.11 with Linux support - Copyright 1998 Free Software Foundation, Inc. - GDB is free software, covered by the GNU General Public License, and you are - welcome to change it and/or distribute copies of it under certain conditions. - Type "show copying" to see the conditions. - There is absolutely no warranty for GDB. Type "show warranty" for details. - This GDB was configured as "i386-redhat-linux"... - - (gdb) att 1935 - Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 1935 - 0x100756d9 in __wait4 () - - - Let's see what's currently running:: - - - - (gdb) p current_task.pid - $1 = 0 - - - - - - It's the idle thread, which means that fsck went to sleep for some - reason and never woke up. - - - Let's guess that the last process in the process list is fsck:: - - - - (gdb) p current_task.prev_task.comm - $13 = "fsck.ext2\000\000\000\000\000\000" - - - - - - It is, so let's see what it thinks it's up to:: - - - - (gdb) p current_task.prev_task.thread - $14 = {extern_pid = 1980, tracing = 0, want_tracing = 0, forking = 0, - kernel_stack_page = 0, signal_stack = 1342627840, syscall = {id = 4, args = { - 3, 134973440, 1024, 0, 1024}, have_result = 0, result = 50590720}, - request = {op = 2, u = {exec = {ip = 1350467584, sp = 2952789424}, fork = { - regs = {1350467584, 2952789424, 0 <repeats 15 times>}, sigstack = 0, - pid = 0}, switch_to = 0x507e8000, thread = {proc = 0x507e8000, - arg = 0xaffffdb0, flags = 0, new_pid = 0}, input_request = { - op = 1350467584, fd = -1342177872, proc = 0, pid = 0}}}} - - - - The interesting things here are the fact that its .thread.syscall.id - is __NR_write (see the big switch in arch/um/kernel/syscall_kern.c or - the defines in include/asm-um/arch/unistd.h), and that it never - returned. Also, its .request.op is OP_SWITCH (see - arch/um/include/user_util.h). These mean that it went into a write, - and, for some reason, called schedule(). - - - The fact that it never returned from write means that its stack should - be fairly interesting. Its pid is 1980 (.thread.extern_pid). That - process is being ptraced by the signal thread, so it must be detached - before gdb can attach it:: - - - - (gdb) call detach(1980) - - Program received signal SIGSEGV, Segmentation fault. - <function called from gdb> - The program being debugged stopped while in a function called from GDB. - When the function (detach) is done executing, GDB will silently - stop (instead of continuing to evaluate the expression containing - the function call). - (gdb) call detach(1980) - $15 = 0 - - - The first detach segfaults for some reason, and the second one - succeeds. - - - Now I detach from the signal thread, attach to the fsck thread, and - look at its stack:: - - - (gdb) det - Detaching from program: /home/dike/linux/2.3.26/um/linux Pid 1935 - (gdb) att 1980 - Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 1980 - 0x10070451 in __kill () - (gdb) bt - #0 0x10070451 in __kill () - #1 0x10068ccd in usr1_pid (pid=1980) at process.c:30 - #2 0x1006a03f in _switch_to (prev=0x50072000, next=0x507e8000) - at process_kern.c:156 - #3 0x1006a052 in switch_to (prev=0x50072000, next=0x507e8000, last=0x50072000) - at process_kern.c:161 - #4 0x10001d12 in schedule () at core.c:777 - #5 0x1006a744 in __down (sem=0x507d241c) at semaphore.c:71 - #6 0x1006aa10 in __down_failed () at semaphore.c:157 - #7 0x1006c5d8 in segv_handler (sc=0x5006e940) at trap_user.c:174 - #8 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182 - #9 <signal handler called> - #10 0x10155404 in errno () - #11 0x1006c0aa in segv (address=1342179328, is_write=2) at trap_kern.c:50 - #12 0x1006c5d8 in segv_handler (sc=0x5006eaf8) at trap_user.c:174 - #13 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182 - #14 <signal handler called> - #15 0xc0fd in ?? () - #16 0x10016647 in sys_write (fd=3, - buf=0x80b8800 <Address 0x80b8800 out of bounds>, count=1024) - at read_write.c:159 - #17 0x1006d5b3 in execute_syscall (syscall=4, args=0x5006ef08) - at syscall_kern.c:254 - #18 0x1006af87 in really_do_syscall (sig=12) at syscall_user.c:35 - #19 <signal handler called> - #20 0x400dc8b0 in ?? () - - - - - - The interesting things here are: - - - There are two segfaults on this stack (frames 9 and 14) - - - The first faulting address (frame 11) is 0x50000800:: - - (gdb) p (void *)1342179328 - $16 = (void *) 0x50000800 - - - - - - The initial faulting address is interesting because it is on the idle - thread's stack. I had been seeing the idle thread segfault for no - apparent reason, and the cause looked like stack corruption. In hopes - of catching the culprit in the act, I had turned off all protections - to that stack while the idle thread wasn't running. This apparently - tripped that trap. - - - However, the more immediate problem is that second segfault and I'm - going to concentrate on that. First, I want to see where the fault - happened, so I have to go look at the sigcontent struct in frame 8:: - - - - (gdb) up - #1 0x10068ccd in usr1_pid (pid=1980) at process.c:30 - 30 kill(pid, SIGUSR1); - (gdb) - #2 0x1006a03f in _switch_to (prev=0x50072000, next=0x507e8000) - at process_kern.c:156 - 156 usr1_pid(getpid()); - (gdb) - #3 0x1006a052 in switch_to (prev=0x50072000, next=0x507e8000, last=0x50072000) - at process_kern.c:161 - 161 _switch_to(prev, next); - (gdb) - #4 0x10001d12 in schedule () at core.c:777 - 777 switch_to(prev, next, prev); - (gdb) - #5 0x1006a744 in __down (sem=0x507d241c) at semaphore.c:71 - 71 schedule(); - (gdb) - #6 0x1006aa10 in __down_failed () at semaphore.c:157 - 157 } - (gdb) - #7 0x1006c5d8 in segv_handler (sc=0x5006e940) at trap_user.c:174 - 174 segv(sc->cr2, sc->err & 2); - (gdb) - #8 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182 - 182 segv_handler(sc); - (gdb) p *sc - Cannot access memory at address 0x0. - - - - - That's not very useful, so I'll try a more manual method:: - - - (gdb) p *((struct sigcontext *) (&sig + 1)) - $19 = {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds = 43, - __dsh = 0, edi = 1342179328, esi = 1350378548, ebp = 1342630440, - esp = 1342630420, ebx = 1348150624, edx = 1280, ecx = 0, eax = 0, - trapno = 14, err = 4, eip = 268480945, cs = 35, __csh = 0, eflags = 66118, - esp_at_signal = 1342630420, ss = 43, __ssh = 0, fpstate = 0x0, oldmask = 0, - cr2 = 1280} - - - - The ip is in handle_mm_fault:: - - - (gdb) p (void *)268480945 - $20 = (void *) 0x1000b1b1 - (gdb) i sym $20 - handle_mm_fault + 57 in section .text - - - - - - Specifically, it's in pte_alloc:: - - - (gdb) i line *$20 - Line 124 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" - starts at address 0x1000b1b1 <handle_mm_fault+57> - and ends at 0x1000b1b7 <handle_mm_fault+63>. - - - - - - To find where in handle_mm_fault this is, I'll jump forward in the - code until I see an address in that procedure:: - - - - (gdb) i line *0x1000b1c0 - Line 126 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" - starts at address 0x1000b1b7 <handle_mm_fault+63> - and ends at 0x1000b1c3 <handle_mm_fault+75>. - (gdb) i line *0x1000b1d0 - Line 131 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" - starts at address 0x1000b1d0 <handle_mm_fault+88> - and ends at 0x1000b1da <handle_mm_fault+98>. - (gdb) i line *0x1000b1e0 - Line 61 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" - starts at address 0x1000b1da <handle_mm_fault+98> - and ends at 0x1000b1e1 <handle_mm_fault+105>. - (gdb) i line *0x1000b1f0 - Line 134 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" - starts at address 0x1000b1f0 <handle_mm_fault+120> - and ends at 0x1000b200 <handle_mm_fault+136>. - (gdb) i line *0x1000b200 - Line 135 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" - starts at address 0x1000b200 <handle_mm_fault+136> - and ends at 0x1000b208 <handle_mm_fault+144>. - (gdb) i line *0x1000b210 - Line 139 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" - starts at address 0x1000b210 <handle_mm_fault+152> - and ends at 0x1000b219 <handle_mm_fault+161>. - (gdb) i line *0x1000b220 - Line 1168 of "memory.c" starts at address 0x1000b21e <handle_mm_fault+166> - and ends at 0x1000b222 <handle_mm_fault+170>. - - - - - - Something is apparently wrong with the page tables or vma_structs, so - lets go back to frame 11 and have a look at them:: - - - - #11 0x1006c0aa in segv (address=1342179328, is_write=2) at trap_kern.c:50 - 50 handle_mm_fault(current, vma, address, is_write); - (gdb) call pgd_offset_proc(vma->vm_mm, address) - $22 = (pgd_t *) 0x80a548c - - - - - - That's pretty bogus. Page tables aren't supposed to be in process - text or data areas. Let's see what's in the vma:: - - - (gdb) p *vma - $23 = {vm_mm = 0x507d2434, vm_start = 0, vm_end = 134512640, - vm_next = 0x80a4f8c, vm_page_prot = {pgprot = 0}, vm_flags = 31200, - vm_avl_height = 2058, vm_avl_left = 0x80a8c94, vm_avl_right = 0x80d1000, - vm_next_share = 0xaffffdb0, vm_pprev_share = 0xaffffe63, - vm_ops = 0xaffffe7a, vm_pgoff = 2952789626, vm_file = 0xafffffec, - vm_private_data = 0x62} - (gdb) p *vma.vm_mm - $24 = {mmap = 0x507d2434, mmap_avl = 0x0, mmap_cache = 0x8048000, - pgd = 0x80a4f8c, mm_users = {counter = 0}, mm_count = {counter = 134904288}, - map_count = 134909076, mmap_sem = {count = {counter = 135073792}, - sleepers = -1342177872, wait = {lock = <optimized out or zero length>, - task_list = {next = 0xaffffe63, prev = 0xaffffe7a}, - __magic = -1342177670, __creator = -1342177300}, __magic = 98}, - page_table_lock = {}, context = 138, start_code = 0, end_code = 0, - start_data = 0, end_data = 0, start_brk = 0, brk = 0, start_stack = 0, - arg_start = 0, arg_end = 0, env_start = 0, env_end = 0, rss = 1350381536, - total_vm = 0, locked_vm = 0, def_flags = 0, cpu_vm_mask = 0, swap_cnt = 0, - swap_address = 0, segments = 0x0} - - - - This also pretty bogus. With all of the 0x80xxxxx and 0xaffffxxx - addresses, this is looking like a stack was plonked down on top of - these structures. Maybe it's a stack overflow from the next page:: - - - (gdb) p vma - $25 = (struct vm_area_struct *) 0x507d2434 - - - - That's towards the lower quarter of the page, so that would have to - have been pretty heavy stack overflow:: - - - (gdb) x/100x $25 - 0x507d2434: 0x507d2434 0x00000000 0x08048000 0x080a4f8c - 0x507d2444: 0x00000000 0x080a79e0 0x080a8c94 0x080d1000 - 0x507d2454: 0xaffffdb0 0xaffffe63 0xaffffe7a 0xaffffe7a - 0x507d2464: 0xafffffec 0x00000062 0x0000008a 0x00000000 - 0x507d2474: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d2484: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d2494: 0x00000000 0x00000000 0x507d2fe0 0x00000000 - 0x507d24a4: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d24b4: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d24c4: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d24d4: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d24e4: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d24f4: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d2504: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d2514: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d2524: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d2534: 0x00000000 0x00000000 0x507d25dc 0x00000000 - 0x507d2544: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d2554: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d2564: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d2574: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d2584: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d2594: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d25a4: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x507d25b4: 0x00000000 0x00000000 0x00000000 0x00000000 - - - - It's not stack overflow. The only "stack-like" piece of this data is - the vma_struct itself. - - - At this point, I don't see any avenues to pursue, so I just have to - admit that I have no idea what's going on. What I will do, though, is - stick a trap on the segfault handler which will stop if it sees any - writes to the idle thread's stack. That was the thing that happened - first, and it may be that if I can catch it immediately, what's going - on will be somewhat clearer. - - -12.2. Episode 2: The case of the hung fsck -------------------------------------------- - - After setting a trap in the SEGV handler for accesses to the signal - thread's stack, I reran the kernel. - - - fsck hung again, this time by hitting the trap:: - - - - Setting hostname uml [ OK ] - Checking root filesystem - /dev/fhd0 contains a file system with errors, check forced. - Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. - - /dev/fhd0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. - (i.e., without -a or -p options) - [ FAILED ] - - *** An error occurred during the file system check. - *** Dropping you to a shell; the system will reboot - *** when you leave the shell. - Give root password for maintenance - (or type Control-D for normal startup): - - [root@uml /root]# fsck -y /dev/fhd0 - fsck -y /dev/fhd0 - Parallelizing fsck version 1.14 (9-Jan-1999) - e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09 - /dev/fhd0 contains a file system with errors, check forced. - Pass 1: Checking inodes, blocks, and sizes - Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. Ignore error? yes - - Pass 2: Checking directory structure - Error reading block 49405 (Attempt to read block from filesystem resulted in short read). Ignore error? yes - - Directory inode 11858, block 0, offset 0: directory corrupted - Salvage? yes - - Missing '.' in directory inode 11858. - Fix? yes - - Missing '..' in directory inode 11858. - Fix? yes - - Untested (4127) [100fe44c]: trap_kern.c line 31 - - - - - - I need to get the signal thread to detach from pid 4127 so that I can - attach to it with gdb. This is done by sending it a SIGUSR1, which is - caught by the signal thread, which detaches the process:: - - - kill -USR1 4127 - - - - - - Now I can run gdb on it:: - - - ~/linux/2.3.26/um 1034: gdb linux - GNU gdb 4.17.0.11 with Linux support - Copyright 1998 Free Software Foundation, Inc. - GDB is free software, covered by the GNU General Public License, and you are - welcome to change it and/or distribute copies of it under certain conditions. - Type "show copying" to see the conditions. - There is absolutely no warranty for GDB. Type "show warranty" for details. - This GDB was configured as "i386-redhat-linux"... - (gdb) att 4127 - Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 4127 - 0x10075891 in __libc_nanosleep () - - - - - - The backtrace shows that it was in a write and that the fault address - (address in frame 3) is 0x50000800, which is right in the middle of - the signal thread's stack page:: - - - (gdb) bt - #0 0x10075891 in __libc_nanosleep () - #1 0x1007584d in __sleep (seconds=1000000) - at ../sysdeps/unix/sysv/linux/sleep.c:78 - #2 0x1006ce9a in stop () at user_util.c:191 - #3 0x1006bf88 in segv (address=1342179328, is_write=2) at trap_kern.c:31 - #4 0x1006c628 in segv_handler (sc=0x5006eaf8) at trap_user.c:174 - #5 0x1006c63c in kern_segv_handler (sig=11) at trap_user.c:182 - #6 <signal handler called> - #7 0xc0fd in ?? () - #8 0x10016647 in sys_write (fd=3, buf=0x80b8800 "R.", count=1024) - at read_write.c:159 - #9 0x1006d603 in execute_syscall (syscall=4, args=0x5006ef08) - at syscall_kern.c:254 - #10 0x1006af87 in really_do_syscall (sig=12) at syscall_user.c:35 - #11 <signal handler called> - #12 0x400dc8b0 in ?? () - #13 <signal handler called> - #14 0x400dc8b0 in ?? () - #15 0x80545fd in ?? () - #16 0x804daae in ?? () - #17 0x8054334 in ?? () - #18 0x804d23e in ?? () - #19 0x8049632 in ?? () - #20 0x80491d2 in ?? () - #21 0x80596b5 in ?? () - (gdb) p (void *)1342179328 - $3 = (void *) 0x50000800 - - - - Going up the stack to the segv_handler frame and looking at where in - the code the access happened shows that it happened near line 110 of - block_dev.c:: - - - - (gdb) up - #1 0x1007584d in __sleep (seconds=1000000) - at ../sysdeps/unix/sysv/linux/sleep.c:78 - ../sysdeps/unix/sysv/linux/sleep.c:78: No such file or directory. - (gdb) - #2 0x1006ce9a in stop () at user_util.c:191 - 191 while(1) sleep(1000000); - (gdb) - #3 0x1006bf88 in segv (address=1342179328, is_write=2) at trap_kern.c:31 - 31 KERN_UNTESTED(); - (gdb) - #4 0x1006c628 in segv_handler (sc=0x5006eaf8) at trap_user.c:174 - 174 segv(sc->cr2, sc->err & 2); - (gdb) p *sc - $1 = {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds = 43, - __dsh = 0, edi = 1342179328, esi = 134973440, ebp = 1342631484, - esp = 1342630864, ebx = 256, edx = 0, ecx = 256, eax = 1024, trapno = 14, - err = 6, eip = 268550834, cs = 35, __csh = 0, eflags = 66070, - esp_at_signal = 1342630864, ss = 43, __ssh = 0, fpstate = 0x0, oldmask = 0, - cr2 = 1342179328} - (gdb) p (void *)268550834 - $2 = (void *) 0x1001c2b2 - (gdb) i sym $2 - block_write + 1090 in section .text - (gdb) i line *$2 - Line 209 of "/home/dike/linux/2.3.26/um/include/asm/arch/string.h" - starts at address 0x1001c2a1 <block_write+1073> - and ends at 0x1001c2bf <block_write+1103>. - (gdb) i line *0x1001c2c0 - Line 110 of "block_dev.c" starts at address 0x1001c2bf <block_write+1103> - and ends at 0x1001c2e3 <block_write+1139>. - - - - Looking at the source shows that the fault happened during a call to - copy_from_user to copy the data into the kernel:: - - - 107 count -= chars; - 108 copy_from_user(p,buf,chars); - 109 p += chars; - 110 buf += chars; - - - - p is the pointer which must contain 0x50000800, since buf contains - 0x80b8800 (frame 8 above). It is defined as:: - - - p = offset + bh->b_data; - - - - - - I need to figure out what bh is, and it just so happens that bh is - passed as an argument to mark_buffer_uptodate and mark_buffer_dirty a - few lines later, so I do a little disassembly:: - - - (gdb) disas 0x1001c2bf 0x1001c2e0 - Dump of assembler code from 0x1001c2bf to 0x1001c2d0: - 0x1001c2bf <block_write+1103>: addl %eax,0xc(%ebp) - 0x1001c2c2 <block_write+1106>: movl 0xfffffdd4(%ebp),%edx - 0x1001c2c8 <block_write+1112>: btsl $0x0,0x18(%edx) - 0x1001c2cd <block_write+1117>: btsl $0x1,0x18(%edx) - 0x1001c2d2 <block_write+1122>: sbbl %ecx,%ecx - 0x1001c2d4 <block_write+1124>: testl %ecx,%ecx - 0x1001c2d6 <block_write+1126>: jne 0x1001c2e3 <block_write+1139> - 0x1001c2d8 <block_write+1128>: pushl $0x0 - 0x1001c2da <block_write+1130>: pushl %edx - 0x1001c2db <block_write+1131>: call 0x1001819c <__mark_buffer_dirty> - End of assembler dump. - - - - - - At that point, bh is in %edx (address 0x1001c2da), which is calculated - at 0x1001c2c2 as %ebp + 0xfffffdd4, so I figure exactly what that is, - taking %ebp from the sigcontext_struct above:: - - - (gdb) p (void *)1342631484 - $5 = (void *) 0x5006ee3c - (gdb) p 0x5006ee3c+0xfffffdd4 - $6 = 1342630928 - (gdb) p (void *)$6 - $7 = (void *) 0x5006ec10 - (gdb) p *((void **)$7) - $8 = (void *) 0x50100200 - - - - - - Now, I look at the structure to see what's in it, and particularly, - what its b_data field contains:: - - - (gdb) p *((struct buffer_head *)0x50100200) - $13 = {b_next = 0x50289380, b_blocknr = 49405, b_size = 1024, b_list = 0, - b_dev = 15872, b_count = {counter = 1}, b_rdev = 15872, b_state = 24, - b_flushtime = 0, b_next_free = 0x501001a0, b_prev_free = 0x50100260, - b_this_page = 0x501001a0, b_reqnext = 0x0, b_pprev = 0x507fcf58, - b_data = 0x50000800 "", b_page = 0x50004000, - b_end_io = 0x10017f60 <end_buffer_io_sync>, b_dev_id = 0x0, - b_rsector = 98810, b_wait = {lock = <optimized out or zero length>, - task_list = {next = 0x50100248, prev = 0x50100248}, __magic = 1343226448, - __creator = 0}, b_kiobuf = 0x0} - - - - - - The b_data field is indeed 0x50000800, so the question becomes how - that happened. The rest of the structure looks fine, so this probably - is not a case of data corruption. It happened on purpose somehow. - - - The b_page field is a pointer to the page_struct representing the - 0x50000000 page. Looking at it shows the kernel's idea of the state - of that page:: - - - - (gdb) p *$13.b_page - $17 = {list = {next = 0x50004a5c, prev = 0x100c5174}, mapping = 0x0, - index = 0, next_hash = 0x0, count = {counter = 1}, flags = 132, lru = { - next = 0x50008460, prev = 0x50019350}, wait = { - lock = <optimized out or zero length>, task_list = {next = 0x50004024, - prev = 0x50004024}, __magic = 1342193708, __creator = 0}, - pprev_hash = 0x0, buffers = 0x501002c0, virtual = 1342177280, - zone = 0x100c5160} - - - - - - Some sanity-checking: the virtual field shows the "virtual" address of - this page, which in this kernel is the same as its "physical" address, - and the page_struct itself should be mem_map[0], since it represents - the first page of memory:: - - - - (gdb) p (void *)1342177280 - $18 = (void *) 0x50000000 - (gdb) p mem_map - $19 = (mem_map_t *) 0x50004000 - - - - - - These check out fine. - - - Now to check out the page_struct itself. In particular, the flags - field shows whether the page is considered free or not:: - - - (gdb) p (void *)132 - $21 = (void *) 0x84 - - - - - - The "reserved" bit is the high bit, which is definitely not set, so - the kernel considers the signal stack page to be free and available to - be used. - - - At this point, I jump to conclusions and start looking at my early - boot code, because that's where that page is supposed to be reserved. - - - In my setup_arch procedure, I have the following code which looks just - fine:: - - - - bootmap_size = init_bootmem(start_pfn, end_pfn - start_pfn); - free_bootmem(__pa(low_physmem) + bootmap_size, high_physmem - low_physmem); - - - - - - Two stack pages have already been allocated, and low_physmem points to - the third page, which is the beginning of free memory. - The init_bootmem call declares the entire memory to the boot memory - manager, which marks it all reserved. The free_bootmem call frees up - all of it, except for the first two pages. This looks correct to me. - - - So, I decide to see init_bootmem run and make sure that it is marking - those first two pages as reserved. I never get that far. - - - Stepping into init_bootmem, and looking at bootmem_map before looking - at what it contains shows the following:: - - - - (gdb) p bootmem_map - $3 = (void *) 0x50000000 - - - - - - Aha! The light dawns. That first page is doing double duty as a - stack and as the boot memory map. The last thing that the boot memory - manager does is to free the pages used by its memory map, so this page - is getting freed even its marked as reserved. - - - The fix was to initialize the boot memory manager before allocating - those two stack pages, and then allocate them through the boot memory - manager. After doing this, and fixing a couple of subsequent buglets, - the stack corruption problem disappeared. - - - - - -13. What to do when UML doesn't work -===================================== - - - - -13.1. Strange compilation errors when you build from source ------------------------------------------------------------- - - As of test11, it is necessary to have "ARCH=um" in the environment or - on the make command line for all steps in building UML, including - clean, distclean, or mrproper, config, menuconfig, or xconfig, dep, - and linux. If you forget for any of them, the i386 build seems to - contaminate the UML build. If this happens, start from scratch with:: - - - host% - make mrproper ARCH=um - - - - - and repeat the build process with ARCH=um on all the steps. - - - See :ref:`Compiling_the_kernel_and_modules` for more details. - - - Another cause of strange compilation errors is building UML in - /usr/src/linux. If you do this, the first thing you need to do is - clean up the mess you made. The /usr/src/linux/asm link will now - point to /usr/src/linux/asm-um. Make it point back to - /usr/src/linux/asm-i386. Then, move your UML pool someplace else and - build it there. Also see below, where a more specific set of symptoms - is described. - - - -13.3. A variety of panics and hangs with /tmp on a reiserfs filesystem ------------------------------------------------------------------------ - - I saw this on reiserfs 3.5.21 and it seems to be fixed in 3.5.27. - Panics preceded by:: - - - Detaching pid nnnn - - - - are diagnostic of this problem. This is a reiserfs bug which causes a - thread to occasionally read stale data from a mmapped page shared with - another thread. The fix is to upgrade the filesystem or to have /tmp - be an ext2 filesystem. - - - - 13.4. The compile fails with errors about conflicting types for - 'open', 'dup', and 'waitpid' - - This happens when you build in /usr/src/linux. The UML build makes - the include/asm link point to include/asm-um. /usr/include/asm points - to /usr/src/linux/include/asm, so when that link gets moved, files - which need to include the asm-i386 versions of headers get the - incompatible asm-um versions. The fix is to move the include/asm link - back to include/asm-i386 and to do UML builds someplace else. - - - -13.5. UML doesn't work when /tmp is an NFS filesystem ------------------------------------------------------- - - This seems to be a similar situation with the ReiserFS problem above. - Some versions of NFS seems not to handle mmap correctly, which UML - depends on. The workaround is have /tmp be a non-NFS directory. - - -13.6. UML hangs on boot when compiled with gprof support ---------------------------------------------------------- - - If you build UML with gprof support and, early in the boot, it does - this:: - - - kernel BUG at page_alloc.c:100! - - - - - you have a buggy gcc. You can work around the problem by removing - UM_FASTCALL from CFLAGS in arch/um/Makefile-i386. This will open up - another bug, but that one is fairly hard to reproduce. - - - -13.7. syslogd dies with a SIGTERM on startup ---------------------------------------------- - - The exact boot error depends on the distribution that you're booting, - but Debian produces this:: - - - /etc/rc2.d/S10sysklogd: line 49: 93 Terminated - start-stop-daemon --start --quiet --exec /sbin/syslogd -- $SYSLOGD - - - - - This is a syslogd bug. There's a race between a parent process - installing a signal handler and its child sending the signal. - - - -13.8. TUN/TAP networking doesn't work on a 2.4 host ----------------------------------------------------- - - There are a couple of problems which were reported by - Tim Robinson <timro at trkr dot net> - - - It doesn't work on hosts running 2.4.7 (or thereabouts) or earlier. - The fix is to upgrade to something more recent and then read the - next item. - - - If you see:: - - - File descriptor in bad state - - - - when you bring up the device inside UML, you have a header mismatch - between the original kernel and the upgraded one. Make /usr/src/linux - point at the new headers. This will only be a problem if you build - uml_net yourself. - - - -13.9. You can network to the host but not to other machines on the net -======================================================================= - - If you can connect to the host, and the host can connect to UML, but - you cannot connect to any other machines, then you may need to enable - IP Masquerading on the host. Usually this is only experienced when - using private IP addresses (192.168.x.x or 10.x.x.x) for host/UML - networking, rather than the public address space that your host is - connected to. UML does not enable IP Masquerading, so you will need - to create a static rule to enable it:: - - - host% - iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE - - - - - Replace eth0 with the interface that you use to talk to the rest of - the world. - - - Documentation on IP Masquerading, and SNAT, can be found at - http://www.netfilter.org. - - - If you can reach the local net, but not the outside Internet, then - that is usually a routing problem. The UML needs a default route:: - - - UML# - route add default gw gateway IP - - - - - The gateway IP can be any machine on the local net that knows how to - reach the outside world. Usually, this is the host or the local net- - work's gateway. - - - Occasionally, we hear from someone who can reach some machines, but - not others on the same net, or who can reach some ports on other - machines, but not others. These are usually caused by strange - firewalling somewhere between the UML and the other box. You track - this down by running tcpdump on every interface the packets travel - over and see where they disappear. When you find a machine that takes - the packets in, but does not send them onward, that's the culprit. - - - -13.10. I have no root and I want to scream -=========================================== - - Thanks to Birgit Wahlich for telling me about this strange one. It - turns out that there's a limit of six environment variables on the - kernel command line. When that limit is reached or exceeded, argument - processing stops, which means that the 'root=' argument that UML - usually adds is not seen. So, the filesystem has no idea what the - root device is, so it panics. - - - The fix is to put less stuff on the command line. Glomming all your - setup variables into one is probably the best way to go. - - - -13.11. UML build conflict between ptrace.h and ucontext.h -========================================================== - - On some older systems, /usr/include/asm/ptrace.h and - /usr/include/sys/ucontext.h define the same names. So, when they're - included together, the defines from one completely mess up the parsing - of the other, producing errors like:: - - /usr/include/sys/ucontext.h:47: parse error before - `10` - - - - - plus a pile of warnings. - - - This is a libc botch, which has since been fixed, and I don't see any - way around it besides upgrading. - - - -13.12. The UML BogoMips is exactly half the host's BogoMips ------------------------------------------------------------- - - On i386 kernels, there are two ways of running the loop that is used - to calculate the BogoMips rating, using the TSC if it's there or using - a one-instruction loop. The TSC produces twice the BogoMips as the - loop. UML uses the loop, since it has nothing resembling a TSC, and - will get almost exactly the same BogoMips as a host using the loop. - However, on a host with a TSC, its BogoMips will be double the loop - BogoMips, and therefore double the UML BogoMips. - - - -13.13. When you run UML, it immediately segfaults --------------------------------------------------- - - If the host is configured with the 2G/2G address space split, that's - why. See ref:`UML_on_2G/2G_hosts` for the details on getting UML to - run on your host. - - - -13.14. xterms appear, then immediately disappear -------------------------------------------------- - - If you're running an up to date kernel with an old release of - uml_utilities, the port-helper program will not work properly, so - xterms will exit straight after they appear. The solution is to - upgrade to the latest release of uml_utilities. Usually this problem - occurs when you have installed a packaged release of UML then compiled - your own development kernel without upgrading the uml_utilities from - the source distribution. - - - -13.15. Any other panic, hang, or strange behavior --------------------------------------------------- - - If you're seeing truly strange behavior, such as hangs or panics that - happen in random places, or you try running the debugger to see what's - happening and it acts strangely, then it could be a problem in the - host kernel. If you're not running a stock Linus or -ac kernel, then - try that. An early version of the preemption patch and a 2.4.10 SuSE - kernel have caused very strange problems in UML. - - - Otherwise, let me know about it. Send a message to one of the UML - mailing lists - either the developer list - user-mode-linux-devel at - lists dot sourceforge dot net (subscription info) or the user list - - user-mode-linux-user at lists dot sourceforge do net (subscription - info), whichever you prefer. Don't assume that everyone knows about - it and that a fix is imminent. - - - If you want to be super-helpful, read :ref:`Diagnosing_Problems` and - follow the instructions contained therein. - -.. _Diagnosing_Problems: - -14. Diagnosing Problems -======================== - - - If you get UML to crash, hang, or otherwise misbehave, you should - report this on one of the project mailing lists, either the developer - list - user-mode-linux-devel at lists dot sourceforge dot net - (subscription info) or the user list - user-mode-linux-user at lists - dot sourceforge dot net (subscription info). When you do, it is - likely that I will want more information. So, it would be helpful to - read the stuff below, do whatever is applicable in your case, and - report the results to the list. - - - For any diagnosis, you're going to need to build a debugging kernel. - The binaries from this site aren't debuggable. If you haven't done - this before, read about :ref:`Compiling_the_kernel_and_modules` and - :ref:`Kernel_debugging` UML first. - - -14.1. Case 1 : Normal kernel panics ------------------------------------- - - The most common case is for a normal thread to panic. To debug this, - you will need to run it under the debugger (add 'debug' to the command - line). An xterm will start up with gdb running inside it. Continue - it when it stops in start_kernel and make it crash. Now ``^C gdb`` and - - - If the panic was a "Kernel mode fault", then there will be a segv - frame on the stack and I'm going to want some more information. The - stack might look something like this:: - - - (UML gdb) backtrace - #0 0x1009bf76 in __sigprocmask (how=1, set=0x5f347940, oset=0x0) - at ../sysdeps/unix/sysv/linux/sigprocmask.c:49 - #1 0x10091411 in change_sig (signal=10, on=1) at process.c:218 - #2 0x10094785 in timer_handler (sig=26) at time_kern.c:32 - #3 0x1009bf38 in __restore () - at ../sysdeps/unix/sysv/linux/i386/sigaction.c:125 - #4 0x1009534c in segv (address=8, ip=268849158, is_write=2, is_user=0) - at trap_kern.c:66 - #5 0x10095c04 in segv_handler (sig=11) at trap_user.c:285 - #6 0x1009bf38 in __restore () - - - - - I'm going to want to see the symbol and line information for the value - of ip in the segv frame. In this case, you would do the following:: - - - (UML gdb) i sym 268849158 - - - - - and:: - - - (UML gdb) i line *268849158 - - - - - The reason for this is the __restore frame right above the segv_han- - dler frame is hiding the frame that actually segfaulted. So, I have - to get that information from the faulting ip. - - -14.2. Case 2 : Tracing thread panics -------------------------------------- - - The less common and more painful case is when the tracing thread - panics. In this case, the kernel debugger will be useless because it - needs a healthy tracing thread in order to work. The first thing to - do is get a backtrace from the tracing thread. This is done by - figuring out what its pid is, firing up gdb, and attaching it to that - pid. You can figure out the tracing thread pid by looking at the - first line of the console output, which will look like this:: - - - tracing thread pid = 15851 - - - - - or by running ps on the host and finding the line that looks like - this:: - - - jdike 15851 4.5 0.4 132568 1104 pts/0 S 21:34 0:05 ./linux [(tracing thread)] - - - - - If the panic was 'segfault in signals', then follow the instructions - above for collecting information about the location of the seg fault. - - - If the tracing thread flaked out all by itself, then send that - backtrace in and wait for our crack debugging team to fix the problem. - - - 14.3. Case 3 : Tracing thread panics caused by other threads - - However, there are cases where the misbehavior of another thread - caused the problem. The most common panic of this type is:: - - - wait_for_stop failed to wait for <pid> to stop with <signal number> - - - - - In this case, you'll need to get a backtrace from the process men- - tioned in the panic, which is complicated by the fact that the kernel - debugger is defunct and without some fancy footwork, another gdb can't - attach to it. So, this is how the fancy footwork goes: - - In a shell:: - - - host% kill -STOP pid - - - - - Run gdb on the tracing thread as described in case 2 and do:: - - - (host gdb) call detach(pid) - - - If you get a segfault, do it again. It always works the second time. - - Detach from the tracing thread and attach to that other thread:: - - - (host gdb) detach - - - - - - - (host gdb) attach pid - - - - - If gdb hangs when attaching to that process, go back to a shell and - do:: - - - host% - kill -CONT pid - - - - - And then get the backtrace:: - - - (host gdb) backtrace - - - - - -14.4. Case 4 : Hangs ---------------------- - - Hangs seem to be fairly rare, but they sometimes happen. When a hang - happens, we need a backtrace from the offending process. Run the - kernel debugger as described in case 1 and get a backtrace. If the - current process is not the idle thread, then send in the backtrace. - You can tell that it's the idle thread if the stack looks like this:: - - - #0 0x100b1401 in __libc_nanosleep () - #1 0x100a2885 in idle_sleep (secs=10) at time.c:122 - #2 0x100a546f in do_idle () at process_kern.c:445 - #3 0x100a5508 in cpu_idle () at process_kern.c:471 - #4 0x100ec18f in start_kernel () at init/main.c:592 - #5 0x100a3e10 in start_kernel_proc (unused=0x0) at um_arch.c:71 - #6 0x100a383f in signal_tramp (arg=0x100a3dd8) at trap_user.c:50 - - - - - If this is the case, then some other process is at fault, and went to - sleep when it shouldn't have. Run ps on the host and figure out which - process should not have gone to sleep and stayed asleep. Then attach - to it with gdb and get a backtrace as described in case 3. - - - - - - -15. Thanks -=========== - - - A number of people have helped this project in various ways, and this - page gives recognition where recognition is due. - - - If you're listed here and you would prefer a real link on your name, - or no link at all, instead of the despammed email address pseudo-link, - let me know. - - - If you're not listed here and you think maybe you should be, please - let me know that as well. I try to get everyone, but sometimes my - bookkeeping lapses and I forget about contributions. - - -15.1. Code and Documentation ------------------------------ - - Rusty Russell <rusty at linuxcare.com.au> - - - - wrote the HOWTO - http://user-mode-linux.sourceforge.net/old/UserModeLinux-HOWTO.html - - - prodded me into making this project official and putting it on - SourceForge - - - came up with the way cool UML logo - http://user-mode-linux.sourceforge.net/uml-small.png - - - redid the config process - - - Peter Moulder <reiter at netspace.net.au> - Fixed my config and build - processes, and added some useful code to the block driver - - - Bill Stearns <wstearns at pobox.com> - - - - HOWTO updates - - - lots of bug reports - - - lots of testing - - - dedicated a box (uml.ists.dartmouth.edu) to support UML development - - - wrote the mkrootfs script, which allows bootable filesystems of - RPM-based distributions to be cranked out - - - cranked out a large number of filesystems with said script - - - Jim Leu <jleu at mindspring.com> - Wrote the virtual ethernet driver - and associated usermode tools - - Lars Brinkhoff http://lars.nocrew.org/ - Contributed the ptrace - proxy from his own project to allow easier kernel debugging - - - Andrea Arcangeli <andrea at suse.de> - Redid some of the early boot - code so that it would work on machines with Large File Support - - - Chris Emerson - Did the first UML port to Linux/ppc - - - Harald Welte <laforge at gnumonks.org> - Wrote the multicast - transport for the network driver - - - Jorgen Cederlof - Added special file support to hostfs - - - Greg Lonnon <glonnon at ridgerun dot com> - Changed the ubd driver - to allow it to layer a COW file on a shared read-only filesystem and - wrote the iomem emulation support - - - Henrik Nordstrom http://hem.passagen.se/hno/ - Provided a variety - of patches, fixes, and clues - - - Lennert Buytenhek - Contributed various patches, a rewrite of the - network driver, the first implementation of the mconsole driver, and - did the bulk of the work needed to get SMP working again. - - - Yon Uriarte - Fixed the TUN/TAP network backend while I slept. - - - Adam Heath - Made a bunch of nice cleanups to the initialization code, - plus various other small patches. - - - Matt Zimmerman - Matt volunteered to be the UML Debian maintainer and - is doing a real nice job of it. He also noticed and fixed a number of - actually and potentially exploitable security holes in uml_net. Plus - the occasional patch. I like patches. - - - James McMechan - James seems to have taken over maintenance of the ubd - driver and is doing a nice job of it. - - - Chandan Kudige - wrote the umlgdb script which automates the reloading - of module symbols. - - - Steve Schmidtke - wrote the UML slirp transport and hostaudio drivers, - enabling UML processes to access audio devices on the host. He also - submitted patches for the slip transport and lots of other things. - - - David Coulson http://davidcoulson.net - - - - Set up the http://usermodelinux.org site, - which is a great way of keeping the UML user community on top of - UML goings-on. - - - Site documentation and updates - - - Nifty little UML management daemon UMLd - - - Lots of testing and bug reports - - - - -15.2. Flushing out bugs ------------------------- - - - - - Yuri Pudgorodsky - - - Gerald Britton - - - Ian Wehrman - - - Gord Lamb - - - Eugene Koontz - - - John H. Hartman - - - Anders Karlsson - - - Daniel Phillips - - - John Fremlin - - - Rainer Burgstaller - - - James Stevenson - - - Matt Clay - - - Cliff Jefferies - - - Geoff Hoff - - - Lennert Buytenhek - - - Al Viro - - - Frank Klingenhoefer - - - Livio Baldini Soares - - - Jon Burgess - - - Petru Paler - - - Paul - - - Chris Reahard - - - Sverker Nilsson - - - Gong Su - - - johan verrept - - - Bjorn Eriksson - - - Lorenzo Allegrucci - - - Muli Ben-Yehuda - - - David Mansfield - - - Howard Goff - - - Mike Anderson - - - John Byrne - - - Sapan J. Batia - - - Iris Huang - - - Jan Hudec - - - Voluspa - - - - -15.3. Buglets and clean-ups ----------------------------- - - - - - Dave Zarzycki - - - Adam Lazur - - - Boria Feigin - - - Brian J. Murrell - - - JS - - - Roman Zippel - - - Wil Cooley - - - Ayelet Shemesh - - - Will Dyson - - - Sverker Nilsson - - - dvorak - - - v.naga srinivas - - - Shlomi Fish - - - Roger Binns - - - johan verrept - - - MrChuoi - - - Peter Cleve - - - Vincent Guffens - - - Nathan Scott - - - Patrick Caulfield - - - jbearce - - - Catalin Marinas - - - Shane Spencer - - - Zou Min - - - - Ryan Boder - - - Lorenzo Colitti - - - Gwendal Grignou - - - Andre' Breiler - - - Tsutomu Yasuda - - - -15.4. Case Studies -------------------- - - - - Jon Wright - - - William McEwan - - - Michael Richardson - - - -15.5. Other contributions --------------------------- - - - Bill Carr <Bill.Carr at compaq.com> made the Red Hat mkrootfs script - work with RH 6.2. - - Michael Jennings <mikejen at hevanet.com> sent in some material which - is now gracing the top of the index page - http://user-mode-linux.sourceforge.net/ of this site. - - SGI (and more specifically Ralf Baechle <ralf at - uni-koblenz.de> ) gave me an account on oss.sgi.com. - The bandwidth there made it possible to - produce most of the filesystems available on the project download - page. - - Laurent Bonnaud <Laurent.Bonnaud at inpg.fr> took the old grotty - Debian filesystem that I've been distributing and updated it to 2.2. - It is now available by itself here. - - Rik van Riel gave me some ftp space on ftp.nl.linux.org so I can make - releases even when Sourceforge is broken. - - Rodrigo de Castro looked at my broken pte code and told me what was - wrong with it, letting me fix a long-standing (several weeks) and - serious set of bugs. - - Chris Reahard built a specialized root filesystem for running a DNS - server jailed inside UML. It's available from the download - http://user-mode-linux.sourceforge.net/old/dl-sf.html page in the Jail - Filesystems section. diff --git a/Documentation/virt/uml/user_mode_linux_howto_v2.rst b/Documentation/virt/uml/user_mode_linux_howto_v2.rst new file mode 100644 index 000000000000..312e431695d9 --- /dev/null +++ b/Documentation/virt/uml/user_mode_linux_howto_v2.rst @@ -0,0 +1,1209 @@ +.. SPDX-License-Identifier: GPL-2.0 + +######### +UML HowTo +######### + +.. contents:: :local: + +************ +Introduction +************ + +Welcome to User Mode Linux + +User Mode Linux is the first Open Source virtualization platform (first +release date 1991) and second virtualization platform for an x86 PC. + +How is UML Different from a VM using Virtualization package X? +============================================================== + +We have come to assume that virtualization also means some level of +hardware emulation. In fact, it does not. As long as a virtualization +package provides the OS with devices which the OS can recognize and +has a driver for, the devices do not need to emulate real hardware. +Most OSes today have built-in support for a number of "fake" +devices used only under virtualization. +User Mode Linux takes this concept to the ultimate extreme - there +is not a single real device in sight. It is 100% artificial or if +we use the correct term 100% paravirtual. All UML devices are abstract +concepts which map onto something provided by the host - files, sockets, +pipes, etc. + +The other major difference between UML and various virtualization +packages is that there is a distinct difference between the way the UML +kernel and the UML programs operate. +The UML kernel is just a process running on Linux - same as any other +program. It can be run by an unprivileged user and it does not require +anything in terms of special CPU features. +The UML userspace, however, is a bit different. The Linux kernel on the +host machine assists UML in intercepting everything the program running +on a UML instance is trying to do and making the UML kernel handle all +of its requests. +This is different from other virtualization packages which do not make any +difference between the guest kernel and guest programs. This difference +results in a number of advantages and disadvantages of UML over let's say +QEMU which we will cover later in this document. + + +Why Would I Want User Mode Linux? +================================= + + +* If User Mode Linux kernel crashes, your host kernel is still fine. It + is not accelerated in any way (vhost, kvm, etc) and it is not trying to + access any devices directly. It is, in fact, a process like any other. + +* You can run a usermode kernel as a non-root user (you may need to + arrange appropriate permissions for some devices). + +* You can run a very small VM with a minimal footprint for a specific + task (for example 32M or less). + +* You can get extremely high performance for anything which is a "kernel + specific task" such as forwarding, firewalling, etc while still being + isolated from the host kernel. + +* You can play with kernel concepts without breaking things. + +* You are not bound by "emulating" hardware, so you can try weird and + wonderful concepts which are very difficult to support when emulating + real hardware such as time travel and making your system clock + dependent on what UML does (very useful for things like tests). + +* It's fun. + +Why not to run UML +================== + +* The syscall interception technique used by UML makes it inherently + slower for any userspace applications. While it can do kernel tasks + on par with most other virtualization packages, its userspace is + **slow**. The root cause is that UML has a very high cost of creating + new processes and threads (something most Unix/Linux applications + take for granted). + +* UML is strictly uniprocessor at present. If you want to run an + application which needs many CPUs to function, it is clearly the + wrong choice. + +*********************** +Building a UML instance +*********************** + +There is no UML installer in any distribution. While you can use off +the shelf install media to install into a blank VM using a virtualization +package, there is no UML equivalent. You have to use appropriate tools on +your host to build a viable filesystem image. + +This is extremely easy on Debian - you can do it using debootstrap. It is +also easy on OpenWRT - the build process can build UML images. All other +distros - YMMV. + +Creating an image +================= + +Create a sparse raw disk image:: + + # dd if=/dev/zero of=disk_image_name bs=1 count=1 seek=16G + +This will create a 16G disk image. The OS will initially allocate only one +block and will allocate more as they are written by UML. As of kernel +version 4.19 UML fully supports TRIM (as usually used by flash drives). +Using TRIM inside the UML image by specifying discard as a mount option +or by running ``tune2fs -o discard /dev/ubdXX`` will request UML to +return any unused blocks to the OS. + +Create a filesystem on the disk image and mount it:: + + # mkfs.ext4 ./disk_image_name && mount ./disk_image_name /mnt + +This example uses ext4, any other filesystem such as ext3, btrfs, xfs, +jfs, etc will work too. + +Create a minimal OS installation on the mounted filesystem:: + + # debootstrap buster /mnt http://deb.debian.org/debian + +debootstrap does not set up the root password, fstab, hostname or +anything related to networking. It is up to the user to do that. + +Set the root password -t he easiest way to do that is to chroot into the +mounted image:: + + # chroot /mnt + # passwd + # exit + +Edit key system files +===================== + +UML block devices are called ubds. The fstab created by debootstrap +will be empty and it needs an entry for the root file system:: + + /dev/ubd0 ext4 discard,errors=remount-ro 0 1 + +The image hostname will be set to the same as the host on which you +are creating it image. It is a good idea to change that to avoid +"Oh, bummer, I rebooted the wrong machine". + +UML supports two classes of network devices - the older uml_net ones +which are scheduled for obsoletion. These are called ethX. It also +supports the newer vector IO devices which are significantly faster +and have support for some standard virtual network encapsulations like +Ethernet over GRE and Ethernet over L2TPv3. These are called vec0. + +Depending on which one is in use, ``/etc/network/interfaces`` will +need entries like:: + + # legacy UML network devices + auto eth0 + iface eth0 inet dhcp + + # vector UML network devices + auto vec0 + iface eth0 inet dhcp + +We now have a UML image which is nearly ready to run, all we need is a +UML kernel and modules for it. + +Most distributions have a UML package. Even if you intend to use your own +kernel, testing the image with a stock one is always a good start. These +packages come with a set of modules which should be copied to the target +filesystem. The location is distribution dependent. For Debian these +reside under /usr/lib/uml/modules. Copy recursively the content of this +directory to the mounted UML filesystem:: + + # cp -rax /usr/lib/uml/modules /mnt/lib/modules + +If you have compiled your own kernel, you need to use the usual "install +modules to a location" procedure by running:: + + # make install MODULES_DIR=/mnt/lib/modules + +At this point the image is ready to be brought up. + +************************* +Setting Up UML Networking +************************* + +UML networking is designed to emulate an Ethernet connection. This +connection may be either a point-to-point (similar to a connection +between machines using a back-to-back cable) or a connection to a +switch. UML supports a wide variety of means to build these +connections to all of: local machine, remote machine(s), local and +remote UML and other VM instances. + + ++-----------+--------+------------------------------------+------------+ +| Transport | Type | Capabilities | Throughput | ++===========+========+====================================+============+ +| tap | vector | checksum, tso | > 8Gbit | ++-----------+--------+------------------------------------+------------+ +| hybrid | vector | checksum, tso, multipacket rx | > 6GBit | ++-----------+--------+------------------------------------+------------+ +| raw | vector | checksum, tso, multipacket rx, tx" | > 6GBit | ++-----------+--------+------------------------------------+------------+ +| EoGRE | vector | multipacket rx, tx | > 3Gbit | ++-----------+--------+------------------------------------+------------+ +| Eol2tpv3 | vector | multipacket rx, tx | > 3Gbit | ++-----------+--------+------------------------------------+------------+ +| bess | vector | multipacket rx, tx | > 3Gbit | ++-----------+--------+------------------------------------+------------+ +| fd | vector | dependent on fd type | varies | ++-----------+--------+------------------------------------+------------+ +| tuntap | legacy | none | ~ 500Mbit | ++-----------+--------+------------------------------------+------------+ +| daemon | legacy | none | ~ 450Mbit | ++-----------+--------+------------------------------------+------------+ +| socket | legacy | none | ~ 450Mbit | ++-----------+--------+------------------------------------+------------+ +| pcap | legacy | rx only | ~ 450Mbit | ++-----------+--------+------------------------------------+------------+ +| ethertap | legacy | obsolete | ~ 500Mbit | ++-----------+--------+------------------------------------+------------+ +| vde | legacy | obsolete | ~ 500Mbit | ++-----------+--------+------------------------------------+------------+ + +* All transports which have tso and checksum offloads can deliver speeds + approaching 10G on TCP streams. + +* All transports which have multi-packet rx and/or tx can deliver pps + rates of up to 1Mps or more. + +* All legacy transports are generally limited to ~600-700MBit and 0.05Mps + +* GRE and L2TPv3 allow connections to all of: local machine, remote + machines, remote network devices and remote UML instances. + +* Socket allows connections only between UML instances. + +* Daemon and bess require running a local switch. This switch may be + connected to the host as well. + + +Network configuration privileges +================================ + +The majority of the supported networking modes need ``root`` privileges. +For example, in the legacy tuntap networking mode, users were required +to be part of the group associated with the tunnel device. + +For newer network drivers like the vector transports, ``root`` privilege +is required to fire an ioctl to setup the tun interface and/or use +raw sockets where needed. + +This can be achieved by granting the user a particular capability instead +of running UML as root. In case of vector transport, a user can add the +capability ``CAP_NET_ADMIN`` or ``CAP_NET_RAW``, to the uml binary. +Thenceforth, UML can be run with normal user privilges, along with +full networking. + +For example:: + + # sudo setcap cap_net_raw,cap_net_admin+ep linux + +Configuring vector transports +=============================== + +All vector transports support a similar syntax: + +If X is the interface number as in vec0, vec1, vec2, etc, the general +syntax for options is:: + + vecX:transport="Transport Name",option=value,option=value,...,option=value + +Common options +-------------- + +These options are common for all transports: + +* ``depth=int`` - sets the queue depth for vector IO. This is the + amount of packets UML will attempt to read or write in a single + system call. The default number is 64 and is generally sufficient + for most applications that need throughput in the 2-4 Gbit range. + Higher speeds may require larger values. + +* ``mac=XX:XX:XX:XX:XX`` - sets the interface MAC address value. + +* ``gro=[0,1]`` - sets GRO on or off. Enables receive/transmit offloads. + The effect of this option depends on the host side support in the transport + which is being configured. In most cases it will enable TCP segmentation and + RX/TX checksumming offloads. The setting must be identical on the host side + and the UML side. The UML kernel will produce warnings if it is not. + For example, GRO is enabled by default on local machine interfaces + (e.g. veth pairs, bridge, etc), so it should be enabled in UML in the + corresponding UML transports (raw, tap, hybrid) in order for networking to + operate correctly. + +* ``mtu=int`` - sets the interface MTU + +* ``headroom=int`` - adjusts the default headroom (32 bytes) reserved + if a packet will need to be re-encapsulated into for instance VXLAN. + +* ``vec=0`` - disable multipacket io and fall back to packet at a + time mode + +Shared Options +-------------- + +* ``ifname=str`` Transports which bind to a local network interface + have a shared option - the name of the interface to bind to. + +* ``src, dst, src_port, dst_port`` - all transports which use sockets + which have the notion of source and destination and/or source port + and destination port use these to specify them. + +* ``v6=[0,1]`` to specify if a v6 connection is desired for all + transports which operate over IP. Additionally, for transports that + have some differences in the way they operate over v4 and v6 (for example + EoL2TPv3), sets the correct mode of operation. In the absense of this + option, the socket type is determined based on what do the src and dst + arguments resolve/parse to. + +tap transport +------------- + +Example:: + + vecX:transport=tap,ifname=tap0,depth=128,gro=1 + +This will connect vec0 to tap0 on the host. Tap0 must already exist (for example +created using tunctl) and UP. + +tap0 can be configured as a point-to-point interface and given an ip +address so that UML can talk to the host. Alternatively, it is possible +to connect UML to a tap interface which is connected to a bridge. + +While tap relies on the vector infrastructure, it is not a true vector +transport at this point, because Linux does not support multi-packet +IO on tap file descriptors for normal userspace apps like UML. This +is a privilege which is offered only to something which can hook up +to it at kernel level via specialized interfaces like vhost-net. A +vhost-net like helper for UML is planned at some point in the future. + +Privileges required: tap transport requires either: + +* tap interface to exist and be created persistent and owned by the + UML user using tunctl. Example ``tunctl -u uml-user -t tap0`` + +* binary to have ``CAP_NET_ADMIN`` privilege + +hybrid transport +---------------- + +Example:: + + vecX:transport=hybrid,ifname=tap0,depth=128,gro=1 + +This is an experimental/demo transport which couples tap for transmit +and a raw socket for receive. The raw socket allows multi-packet +receive resulting in significantly higher packet rates than normal tap + +Privileges required: hybrid requires ``CAP_NET_RAW`` capability by +the UML user as well as the requirements for the tap transport. + +raw socket transport +-------------------- + +Example:: + + vecX:transport=raw,ifname=p-veth0,depth=128,gro=1 + + +This transport uses vector IO on raw sockets. While you can bind to any +interface including a physical one, the most common use it to bind to +the "peer" side of a veth pair with the other side configured on the +host. + +Example host configuration for Debian: + +**/etc/network/interfaces**:: + + auto veth0 + iface veth0 inet static + address 192.168.4.1 + netmask 255.255.255.252 + broadcast 192.168.4.3 + pre-up ip link add veth0 type veth peer name p-veth0 && \ + ifconfig p-veth0 up + +UML can now bind to p-veth0 like this:: + + vec0:transport=raw,ifname=p-veth0,depth=128,gro=1 + + +If the UML guest is configured with 192.168.4.2 and netmask 255.255.255.0 +it can talk to the host on 192.168.4.1 + +The raw transport also provides some support for offloading some of the +filtering to the host. The two options to control it are: + +* ``bpffile=str`` filename of raw bpf code to be loaded as a socket filter + +* ``bpfflash=int`` 0/1 allow loading of bpf from inside User Mode Linux. + This option allows the use of the ethtool load firmware command to + load bpf code. + +In either case the bpf code is loaded into the host kernel. While this is +presently limited to legacy bpf syntax (not ebpf), it is still a security +risk. It is not recommended to allow this unless the User Mode Linux +instance is considered trusted. + +Privileges required: raw socket transport requires `CAP_NET_RAW` +capability. + +GRE socket transport +-------------------- + +Example:: + + vecX:transport=gre,src=$src_host,dst=$dst_host + + +This will configure an Ethernet over ``GRE`` (aka ``GRETAP`` or +``GREIRB``) tunnel which will connect the UML instance to a ``GRE`` +endpoint at host dst_host. ``GRE`` supports the following additional +options: + +* ``rx_key=int`` - GRE 32 bit integer key for rx packets, if set, + ``txkey`` must be set too + +* ``tx_key=int`` - GRE 32 bit integer key for tx packets, if set + ``rx_key`` must be set too + +* ``sequence=[0,1]`` - enable GRE sequence + +* ``pin_sequence=[0,1]`` - pretend that the sequence is always reset + on each packet (needed to interoperate with some really broken + implementations) + +* ``v6=[0,1]`` - force IPv4 or IPv6 sockets respectively + +* GRE checksum is not presently supported + +GRE has a number of caveats: + +* You can use only one GRE connection per ip address. There is no way to + multiplex connections as each GRE tunnel is terminated directly on + the UML instance. + +* The key is not really a security feature. While it was intended as such + it's "security" is laughable. It is, however, a useful feature to + ensure that the tunnel is not misconfigured. + +An example configuration for a Linux host with a local address of +192.168.128.1 to connect to a UML instance at 192.168.129.1 + +**/etc/network/interfaces**:: + + auto gt0 + iface gt0 inet static + address 10.0.0.1 + netmask 255.255.255.0 + broadcast 10.0.0.255 + mtu 1500 + pre-up ip link add gt0 type gretap local 192.168.128.1 \ + remote 192.168.129.1 || true + down ip link del gt0 || true + +Additionally, GRE has been tested versus a variety of network equipment. + +Privileges required: GRE requires ``CAP_NET_RAW`` + +l2tpv3 socket transport +----------------------- + +_Warning_. L2TPv3 has a "bug". It is the "bug" known as "has more +options than GNU ls". While it has some advantages, there are usually +easier (and less verbose) ways to connect a UML instance to something. +For example, most devices which support L2TPv3 also support GRE. + +Example:: + + vec0:transport=l2tpv3,udp=1,src=$src_host,dst=$dst_host,srcport=$src_port,dstport=$dst_port,depth=128,rx_session=0xffffffff,tx_session=0xffff + +This will configure an Ethernet over L2TPv3 fixed tunnel which will +connect the UML instance to a L2TPv3 endpoint at host $dst_host using +the L2TPv3 UDP flavour and UDP destination port $dst_port. + +L2TPv3 always requires the following additional options: + +* ``rx_session=int`` - l2tpv3 32 bit integer session for rx packets + +* ``tx_session=int`` - l2tpv3 32 bit integer session for tx packets + +As the tunnel is fixed these are not negotiated and they are +preconfigured on both ends. + +Additionally, L2TPv3 supports the following optional parameters + +* ``rx_cookie=int`` - l2tpv3 32 bit integer cookie for rx packets - same + functionality as GRE key, more to prevent misconfiguration than provide + actual security + +* ``tx_cookie=int`` - l2tpv3 32 bit integer cookie for tx packets + +* ``cookie64=[0,1]`` - use 64 bit cookies instead of 32 bit. + +* ``counter=[0,1]`` - enable l2tpv3 counter + +* ``pin_counter=[0,1]`` - pretend that the counter is always reset on + each packet (needed to interoperate with some really broken + implementations) + +* ``v6=[0,1]`` - force v6 sockets + +* ``udp=[0,1]`` - use raw sockets (0) or UDP (1) version of the protocol + +L2TPv3 has a number of caveats: + +* you can use only one connection per ip address in raw mode. There is + no way to multiplex connections as each L2TPv3 tunnel is terminated + directly on the UML instance. UDP mode can use different ports for + this purpose. + +Here is an example of how to configure a linux host to connect to UML +via L2TPv3: + +**/etc/network/interfaces**:: + + auto l2tp1 + iface l2tp1 inet static + address 192.168.126.1 + netmask 255.255.255.0 + broadcast 192.168.126.255 + mtu 1500 + pre-up ip l2tp add tunnel remote 127.0.0.1 \ + local 127.0.0.1 encap udp tunnel_id 2 \ + peer_tunnel_id 2 udp_sport 1706 udp_dport 1707 && \ + ip l2tp add session name l2tp1 tunnel_id 2 \ + session_id 0xffffffff peer_session_id 0xffffffff + down ip l2tp del session tunnel_id 2 session_id 0xffffffff && \ + ip l2tp del tunnel tunnel_id 2 + + +Privileges required: L2TPv3 requires ``CAP_NET_RAW`` for raw IP mode and +no special privileges for the UDP mode. + +BESS socket transport +--------------------- + +BESS is a high performance modular network switch. + +https://github.com/NetSys/bess + +It has support for a simple sequential packet socket mode which in the +more recent versions is using vector IO for high performance. + +Example:: + + vecX:transport=bess,src=$unix_src,dst=$unix_dst + +This will configure a BESS transport using the unix_src Unix domain +socket address as source and unix_dst socket address as destination. + +For BESS configuration and how to allocate a BESS Unix domain socket port +please see the BESS documentation. + +https://github.com/NetSys/bess/wiki/Built-In-Modules-and-Ports + +BESS transport does not require any special privileges. + +Configuring Legacy transports +============================= + +Legacy transports are now considered obsolete. Please use the vector +versions. + +*********** +Running UML +*********** + +This section assumes that either the user-mode-linux package from the +distribution or a custom built kernel has been installed on the host. + +These add an executable called linux to the system. This is the UML +kernel. It can be run just like any other executable. +It will take most normal linux kernel arguments as command line +arguments. Additionally, it will need some UML specific arguments +in order to do something useful. + +Arguments +========= + +Mandatory Arguments: +-------------------- + +* ``mem=int[K,M,G]`` - amount of memory. By default bytes. It will + also accept K, M or G qualifiers. + +* ``ubdX[s,d,c,t]=`` virtual disk specification. This is not really + mandatory, but it is likely to be needed in nearly all cases so we can + specify a root file system. + The simplest possible image specification is the name of the image + file for the filesystem (created using one of the methods described + in `Creating an image`_) + + * UBD devices support copy on write (COW). The changes are kept in + a separate file which can be discarded allowing a rollback to the + original pristine image. If COW is desired, the UBD image is + specified as: ``cow_file,master_image``. + Example:``ubd0=Filesystem.cow,Filesystem.img`` + + * UBD devices can be set to use synchronous IO. Any writes are + immediately flushed to disk. This is done by adding ``s`` after + the ``ubdX`` specification + + * UBD performs some euristics on devices specified as a single + filename to make sure that a COW file has not been specified as + the image. To turn them off, use the ``d`` flag after ``ubdX`` + + * UBD supports TRIM - asking the Host OS to reclaim any unused + blocks in the image. To turn it off, specify the ``t`` flag after + ``ubdX`` + +* ``root=`` root device - most likely ``/dev/ubd0`` (this is a Linux + filesystem image) + +Important Optional Arguments +---------------------------- + +If UML is run as "linux" with no extra arguments, it will try to start an +xterm for every console configured inside the image (up to 6 in most +linux distributions). Each console is started inside an +xterm. This makes it nice and easy to use UML on a host with a GUI. It is, +however, the wrong approach if UML is to be used as a testing harness or run +in a text-only environment. + +In order to change this behaviour we need to specify an alternative console +and wire it to one of the supported "line" channels. For this we need to map a +console to use something different from the default xterm. + +Example which will divert console number 1 to stdin/stdout:: + + con1=fd:0,fd:1 + +UML supports a wide variety of serial line channels which are specified using +the following syntax + + conX=channel_type:options[,channel_type:options] + + +If the channel specification contains two parts separated by comma, the first +one is input, the second one output. + +* The null channel - Discard all input or output. Example ``con=null`` will set + all consoles to null by default. + +* The fd channel - use file descriptor numbers for input/out. Example: + ``con1=fd:0,fd:1.`` + +* The port channel - listen on tcp port number. Example: ``con1=port:4321`` + +* The pty and pts channels - use system pty/pts. + +* The tty channel - bind to an existing system tty. Example: ``con1=/dev/tty8`` + will make UML use the host 8th console (usually unused). + +* The xterm channel - this is the default - bring up an xterm on this channel + and direct IO to it. Note, that in order for xterm to work, the host must + have the UML distribution package installed. This usually contains the + port-helper and other utilities needed for UML to communicate with the xterm. + Alternatively, these need to be complied and installed from source. All + options applicable to consoles also apply to UML serial lines which are + presented as ttyS inside UML. + +Starting UML +============ + +We can now run UML. +:: + + # linux mem=2048M umid=TEST \ + ubd0=Filesystem.img \ + vec0:transport=tap,ifname=tap0,depth=128,gro=1 \ + root=/dev/ubda con=null con0=null,fd:2 con1=fd:0,fd:1 + +This will run an instance with ``2048M RAM``, try to use the image file +called ``Filesystem.img`` as root. It will connect to the host using tap0. +All consoles except ``con1`` will be disabled and console 1 will +use standard input/output making it appear in the same terminal it was started. + +Logging in +============ + +If you have not set up a password when generating the image, you will have to +shut down the UML instance, mount the image, chroot into it and set it - as +described in the Generating an Image section. If the password is already set, +you can just log in. + +The UML Management Console +============================ + +In addition to managing the image from "the inside" using normal sysadmin tools, +it is possible to perform a number of low level operations using the UML +management console. The UML management console is a low-level interface to the +kernel on a running UML instance, somewhat like the i386 SysRq interface. Since +there is a full-blown operating system under UML, there is much greater +flexibility possible than with the SysRq mechanism. + +There are a number of things you can do with the mconsole interface: + +* get the kernel version +* add and remove devices +* halt or reboot the machine +* Send SysRq commands +* Pause and resume the UML +* Inspect processes running inside UML +* Inspect UML internal /proc state + +You need the mconsole client (uml\_mconsole) which is a part of the UML +tools package available in most Linux distritions. + +You also need ``CONFIG_MCONSOLE`` (under 'General Setup') enabled in the UML +kernel. When you boot UML, you'll see a line like:: + + mconsole initialized on /home/jdike/.uml/umlNJ32yL/mconsole + +If you specify a unique machine id one the UML command line, i.e. +``umid=debian``, you'll see this:: + + mconsole initialized on /home/jdike/.uml/debian/mconsole + + +That file is the socket that uml_mconsole will use to communicate with +UML. Run it with either the umid or the full path as its argument:: + + # uml_mconsole debian + +or + + # uml_mconsole /home/jdike/.uml/debian/mconsole + + +You'll get a prompt, at which you can run one of these commands: + +* version +* help +* halt +* reboot +* config +* remove +* sysrq +* help +* cad +* stop +* go +* proc +* stack + +version +------- + +This command takes no arguments. It prints the UML version:: + + (mconsole) version + OK Linux OpenWrt 4.14.106 #0 Tue Mar 19 08:19:41 2019 x86_64 + + +There are a couple actual uses for this. It's a simple no-op which +can be used to check that a UML is running. It's also a way of +sending a device interrupt to the UML. UML mconsole is treated internally as +a UML device. + +help +---- + +This command takes no arguments. It prints a short help screen with the +supported mconsole commands. + + +halt and reboot +--------------- + +These commands take no arguments. They shut the machine down immediately, with +no syncing of disks and no clean shutdown of userspace. So, they are +pretty close to crashing the machine:: + + (mconsole) halt + OK + +config +------ + +"config" adds a new device to the virtual machine. This is supported +by most UML device drivers. It takes one argument, which is the +device to add, with the same syntax as the kernel command line:: + + (mconsole) config ubd3=/home/jdike/incoming/roots/root_fs_debian22 + +remove +------ + +"remove" deletes a device from the system. Its argument is just the +name of the device to be removed. The device must be idle in whatever +sense the driver considers necessary. In the case of the ubd driver, +the removed block device must not be mounted, swapped on, or otherwise +open, and in the case of the network driver, the device must be down:: + + (mconsole) remove ubd3 + +sysrq +----- + +This command takes one argument, which is a single letter. It calls the +generic kernel's SysRq driver, which does whatever is called for by +that argument. See the SysRq documentation in +Documentation/admin-guide/sysrq.rst in your favorite kernel tree to +see what letters are valid and what they do. + +cad +--- + +This invokes the ``Ctl-Alt-Del`` action in the running image. What exactly +this ends up doing is up to init, systemd, etc. Normally, it reboots the +machine. + +stop +---- + +This puts the UML in a loop reading mconsole requests until a 'go' +mconsole command is received. This is very useful as a +debugging/snapshotting tool. + +go +-- + +This resumes a UML after being paused by a 'stop' command. Note that +when the UML has resumed, TCP connections may have timed out and if +the UML is paused for a long period of time, crond might go a little +crazy, running all the jobs it didn't do earlier. + +proc +---- + +This takes one argument - the name of a file in /proc which is printed +to the mconsole standard output + +stack +----- + +This takes one argument - the pid number of a process. Its stack is +printed to a standard output. + +******************* +Advanced UML Topics +******************* + +Sharing Filesystems between Virtual Machines +============================================ + +Don't attempt to share filesystems simply by booting two UMLs from the +same file. That's the same thing as booting two physical machines +from a shared disk. It will result in filesystem corruption. + +Using layered block devices +--------------------------- + +The way to share a filesystem between two virtual machines is to use +the copy-on-write (COW) layering capability of the ubd block driver. +Any changed blocks are stored in the private COW file, while reads come +from either device - the private one if the requested block is valid in +it, the shared one if not. Using this scheme, the majority of data +which is unchanged is shared between an arbitrary number of virtual +machines, each of which has a much smaller file containing the changes +that it has made. With a large number of UMLs booting from a large root +filesystem, this leads to a huge disk space saving. + +Sharing file system data will also help performance, since the host will +be able to cache the shared data using a much smaller amount of memory, +so UML disk requests will be served from the host's memory rather than +its disks. There is a major caveat in doing this on multisocket NUMA +machines. On such hardware, running many UML instances with a shared +master image and COW changes may caise issues like NMIs from excess of +inter-socket traffic. + +If you are running UML on high end hardware like this, make sure to +bind UML to a set of logical cpus residing on the same socket using the +``taskset`` command or have a look at the "tuning" section. + +To add a copy-on-write layer to an existing block device file, simply +add the name of the COW file to the appropriate ubd switch:: + + ubd0=root_fs_cow,root_fs_debian_22 + +where ``root_fs_cow`` is the private COW file and ``root_fs_debian_22`` is +the existing shared filesystem. The COW file need not exist. If it +doesn't, the driver will create and initialize it. + +Disk Usage +---------- + +UML has TRIM support which will release any unused space in its disk +image files to the underlying OS. It is important to use either ls -ls +or du to verify the actual file size. + +COW validity. +------------- + +Any changes to the master image will invalidate all COW files. If this +happens, UML will *NOT* automatically delete any of the COW files and +will refuse to boot. In this case the only solution is to either +restore the old image (including its last modified timestamp) or remove +all COW files which will result in their recreation. Any changes in +the COW files will be lost. + +Cows can moo - uml_moo : Merging a COW file with its backing file +----------------------------------------------------------------- + +Depending on how you use UML and COW devices, it may be advisable to +merge the changes in the COW file into the backing file every once in +a while. + +The utility that does this is uml_moo. Its usage is:: + + uml_moo COW_file new_backing_file + + +There's no need to specify the backing file since that information is +already in the COW file header. If you're paranoid, boot the new +merged file, and if you're happy with it, move it over the old backing +file. + +``uml_moo`` creates a new backing file by default as a safety measure. +It also has a destructive merge option which will merge the COW file +directly into its current backing file. This is really only usable +when the backing file only has one COW file associated with it. If +there are multiple COWs associated with a backing file, a -d merge of +one of them will invalidate all of the others. However, it is +convenient if you're short of disk space, and it should also be +noticeably faster than a non-destructive merge. + +``uml_moo`` is installed with the UML distribution packages and is +available as a part of UML utilities. + +Host file access +================== + +If you want to access files on the host machine from inside UML, you +can treat it as a separate machine and either nfs mount directories +from the host or copy files into the virtual machine with scp. +However, since UML is running on the host, it can access those +files just like any other process and make them available inside the +virtual machine without the need to use the network. +This is possible with the hostfs virtual filesystem. With it, you +can mount a host directory into the UML filesystem and access the +files contained in it just as you would on the host. + +*SECURITY WARNING* + +Hostfs without any parameters to the UML Image will allow the image +to mount any part of the host filesystem and write to it. Always +confine hostfs to a specific "harmless" directory (for example ``/var/tmp``) +if running UML. This is especially important if UML is being run as root. + +Using hostfs +------------ + +To begin with, make sure that hostfs is available inside the virtual +machine with:: + + # cat /proc/filesystems + +``hostfs`` should be listed. If it's not, either rebuild the kernel +with hostfs configured into it or make sure that hostfs is built as a +module and available inside the virtual machine, and insmod it. + + +Now all you need to do is run mount:: + + # mount none /mnt/host -t hostfs + +will mount the host's ``/`` on the virtual machine's ``/mnt/host``. +If you don't want to mount the host root directory, then you can +specify a subdirectory to mount with the -o switch to mount:: + + # mount none /mnt/home -t hostfs -o /home + +will mount the hosts's /home on the virtual machine's /mnt/home. + +hostfs as the root filesystem +----------------------------- + +It's possible to boot from a directory hierarchy on the host using +hostfs rather than using the standard filesystem in a file. +To start, you need that hierarchy. The easiest way is to loop mount +an existing root_fs file:: + + # mount root_fs uml_root_dir -o loop + + +You need to change the filesystem type of ``/`` in ``etc/fstab`` to be +'hostfs', so that line looks like this:: + + /dev/ubd/0 / hostfs defaults 1 1 + +Then you need to chown to yourself all the files in that directory +that are owned by root. This worked for me:: + + # find . -uid 0 -exec chown jdike {} \; + +Next, make sure that your UML kernel has hostfs compiled in, not as a +module. Then run UML with the boot device pointing at that directory:: + + ubd0=/path/to/uml/root/directory + +UML should then boot as it does normally. + +Hostfs Caveats +-------------- + +Hostfs does not support keeping track of host filesystem changes on the +host (outside UML). As a result, if a file is changed without UML's +knowledge, UML will not know about it and its own in-memory cache of +the file may be corrupt. While it is possible to fix this, it is not +something which is being worked on at present. + +Tuning UML +============ + +UML at present is strictly uniprocessor. It will, however spin up a +number of threads to handle various functions. + +The UBD driver, SIGIO and the MMU emulation do that. If the system is +idle, these threads will be migrated to other processors on a SMP host. +This, unfortunately, will usually result in LOWER performance because of +all of the cache/memory synchronization traffic between cores. As a +result, UML will usually benefit from being pinned on a single CPU +especially on a large system. This can result in performance differences +of 5 times or higher on some benchmarks. + +Similarly, on large multi-node NUMA systems UML will benefit if all of +its memory is allocated from the same NUMA node it will run on. The +OS will *NOT* do that by default. In order to do that, the sysadmin +needs to create a suitable tmpfs ramdisk bound to a particular node +and use that as the source for UML RAM allocation by specifying it +in the TMP or TEMP environment variables. UML will look at the values +of ``TMPDIR``, ``TMP`` or ``TEMP`` for that. If that fails, it will +look for shmfs mounted under ``/dev/shm``. If everything else fails use +``/tmp/`` regardless of the filesystem type used for it:: + + mount -t tmpfs -ompol=bind:X none /mnt/tmpfs-nodeX + TEMP=/mnt/tmpfs-nodeX taskset -cX linux options options options.. + +******************************************* +Contributing to UML and Developing with UML +******************************************* + +UML is an excellent platform to develop new Linux kernel concepts - +filesystems, devices, virtualization, etc. It provides unrivalled +opportunities to create and test them without being constrained to +emulating specific hardware. + +Example - want to try how linux will work with 4096 "proper" network +devices? + +Not an issue with UML. At the same time, this is something which +is difficult with other virtualization packages - they are +constrained by the number of devices allowed on the hardware bus +they are trying to emulate (for example 16 on a PCI bus in qemu). + +If you have something to contribute such as a patch, a bugfix, a +new feature, please send it to ``linux-um@lists.infradead.org`` + +Please follow all standard Linux patch guidelines such as cc-ing +relevant maintainers and run ``./sripts/checkpatch.pl`` on your patch. +For more details see ``Documentation/process/submitting-patches.rst`` + +Note - the list does not accept HTML or attachments, all emails must +be formatted as plain text. + +Developing always goes hand in hand with debugging. First of all, +you can always run UML under gdb and there will be a whole section +later on on how to do that. That, however, is not the only way to +debug a linux kernel. Quite often adding tracing statements and/or +using UML specific approaches such as ptracing the UML kernel process +are significantly more informative. + +Tracing UML +============= + +When running UML consists of a main kernel thread and a number of +helper threads. The ones of interest for tracing are NOT the ones +that are already ptraced by UML as a part of its MMU emulation. + +These are usually the first three threads visible in a ps display. +The one with the lowest PID number and using most CPU is usually the +kernel thread. The other threads are the disk +(ubd) device helper thread and the sigio helper thread. +Running ptrace on this thread usually results in the following picture:: + + host$ strace -p 16566 + --- SIGIO {si_signo=SIGIO, si_code=POLL_IN, si_band=65} --- + epoll_wait(4, [{EPOLLIN, {u32=3721159424, u64=3721159424}}], 64, 0) = 1 + epoll_wait(4, [], 64, 0) = 0 + rt_sigreturn({mask=[PIPE]}) = 16967 + ptrace(PTRACE_GETREGS, 16967, NULL, 0xd5f34f38) = 0 + ptrace(PTRACE_GETREGSET, 16967, NT_X86_XSTATE, [{iov_base=0xd5f35010, iov_len=832}]) = 0 + ptrace(PTRACE_GETSIGINFO, 16967, NULL, {si_signo=SIGTRAP, si_code=0x85, si_pid=16967, si_uid=0}) = 0 + ptrace(PTRACE_SETREGS, 16967, NULL, 0xd5f34f38) = 0 + ptrace(PTRACE_SETREGSET, 16967, NT_X86_XSTATE, [{iov_base=0xd5f35010, iov_len=2696}]) = 0 + ptrace(PTRACE_SYSEMU, 16967, NULL, 0) = 0 + --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_TRAPPED, si_pid=16967, si_uid=0, si_status=SIGTRAP, si_utime=65, si_stime=89} --- + wait4(16967, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGTRAP | 0x80}], WSTOPPED|__WALL, NULL) = 16967 + ptrace(PTRACE_GETREGS, 16967, NULL, 0xd5f34f38) = 0 + ptrace(PTRACE_GETREGSET, 16967, NT_X86_XSTATE, [{iov_base=0xd5f35010, iov_len=832}]) = 0 + ptrace(PTRACE_GETSIGINFO, 16967, NULL, {si_signo=SIGTRAP, si_code=0x85, si_pid=16967, si_uid=0}) = 0 + timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=0, tv_nsec=2830912}}, NULL) = 0 + getpid() = 16566 + clock_nanosleep(CLOCK_MONOTONIC, 0, {tv_sec=1, tv_nsec=0}, NULL) = ? ERESTART_RESTARTBLOCK (Interrupted by signal) + --- SIGALRM {si_signo=SIGALRM, si_code=SI_TIMER, si_timerid=0, si_overrun=0, si_value={int=1631716592, ptr=0x614204f0}} --- + rt_sigreturn({mask=[PIPE]}) = -1 EINTR (Interrupted system call) + +This is a typical picture from a mostly idle UML instance + +* UML interrupt controller uses epoll - this is UML waiting for IO + interrupts: + + epoll_wait(4, [{EPOLLIN, {u32=3721159424, u64=3721159424}}], 64, 0) = 1 + +* The sequence of ptrace calls is part of MMU emulation and runnin the + UML userspace +* ``timer_settime`` is part of the UML high res timer subsystem mapping + timer requests from inside UML onto the host high resultion timers. +* ``clock_nanosleep`` is UML going into idle (similar to the way a PC + will execute an ACPI idle). + +As you can see UML will generate quite a bit of output even in idle.The output +can be very informative when observing IO. It shows the actual IO calls, their +arguments and returns values. + +Kernel debugging +================ + +You can run UML under gdb now, though it will not necessarily agree to +be started under it. If you are trying to track a runtime bug, it is +much better to attach gdb to a running UML instance and let UML run. + +Assuming the same PID number as in the previous example, this would be:: + + # gdb -p 16566 + +This will STOP the UML instance, so you must enter `cont` at the GDB +command line to request it to continue. It may be a good idea to make +this into a gdb script and pass it to gdb as an argument. + +Developing Device Drivers +========================= + +Nearly all UML drivers are monolithic. While it is possible to build a +UML driver as a kernel module, that limits the possible functionality +to in-kernel only and non-UML specific. The reason for this is that +in order to really leverage UML, one needs to write a piece of +userspace code which maps driver concepts onto actual userspace host +calls. + +This forms the so called "user" portion of the driver. While it can +reuse a lot of kernel concepts, it is generally just another piece of +userspace code. This portion needs some matching "kernel" code which +resides inside the UML image and which implements the Linux kernel part. + +*Note: There are very few limitations in the way "kernel" and "user" interact*. + +UML does not have a strictly defined kernel to host API. It does not +try to emulate a specific architecture or bus. UML's "kernel" and +"user" can share memory, code and interact as needed to implement +whatever design the software developer has in mind. The only +limitations are purely technical. Due to a lot of functions and +variables having the same names, the developer should be careful +which includes and libraries they are trying to refer to. + +As a result a lot of userspace code consists of simple wrappers. +F.e. ``os_close_file()`` is just a wrapper around ``close()`` +which ensures that the userspace function close does not clash +with similarly named function(s) in the kernel part. + +Security Considerations +----------------------- + +Drivers or any new functionality should default to not +accepting arbitrary filename, bpf code or other parameters +which can affect the host from inside the UML instance. +For example, specifying the socket used for IPC communication +between a driver and the host at the UML command line is OK +security-wise. Allowing it as a loadable module parameter +isn't. + +If such functionality is desireable for a particular application +(e.g. loading BPF "firmware" for raw socket network transports), +it should be off by default and should be explicitly turned on +as a command line parameter at startup. + +Even with this in mind, the level of isolation between UML +and the host is relatively weak. If the UML userspace is +allowed to load arbitrary kernel drivers, an attacker can +use this to break out of UML. Thus, if UML is used in +a production application, it is recommended that all modules +are loaded at boot and kernel module loading is disabled +afterwards. diff --git a/Documentation/vm/active_mm.rst b/Documentation/vm/active_mm.rst index c84471b180f8..6f8269c284ed 100644 --- a/Documentation/vm/active_mm.rst +++ b/Documentation/vm/active_mm.rst @@ -64,7 +64,7 @@ Active MM actually get cases where you have a address space that is _only_ used by lazy users. That is often a short-lived state, because once that thread gets scheduled away in favour of a real thread, the "zombie" mm gets - released because "mm_users" becomes zero. + released because "mm_count" becomes zero. Also, a new rule is that _nobody_ ever has "init_mm" as a real MM any more. "init_mm" should be considered just a "lazy context when no other diff --git a/Documentation/vm/hmm.rst b/Documentation/vm/hmm.rst index 6f9e000757fa..09e28507f5b2 100644 --- a/Documentation/vm/hmm.rst +++ b/Documentation/vm/hmm.rst @@ -1,4 +1,4 @@ -.. hmm: +.. _hmm: ===================================== Heterogeneous Memory Management (HMM) @@ -271,10 +271,139 @@ map those pages from the CPU side. Migration to and from device memory =================================== -Because the CPU cannot access device memory, migration must use the device DMA -engine to perform copy from and to device memory. For this we need to use -migrate_vma_setup(), migrate_vma_pages(), and migrate_vma_finalize() helpers. - +Because the CPU cannot access device memory directly, the device driver must +use hardware DMA or device specific load/store instructions to migrate data. +The migrate_vma_setup(), migrate_vma_pages(), and migrate_vma_finalize() +functions are designed to make drivers easier to write and to centralize common +code across drivers. + +Before migrating pages to device private memory, special device private +``struct page`` need to be created. These will be used as special "swap" +page table entries so that a CPU process will fault if it tries to access +a page that has been migrated to device private memory. + +These can be allocated and freed with:: + + struct resource *res; + struct dev_pagemap pagemap; + + res = request_free_mem_region(&iomem_resource, /* number of bytes */, + "name of driver resource"); + pagemap.type = MEMORY_DEVICE_PRIVATE; + pagemap.range.start = res->start; + pagemap.range.end = res->end; + pagemap.nr_range = 1; + pagemap.ops = &device_devmem_ops; + memremap_pages(&pagemap, numa_node_id()); + + memunmap_pages(&pagemap); + release_mem_region(pagemap.range.start, range_len(&pagemap.range)); + +There are also devm_request_free_mem_region(), devm_memremap_pages(), +devm_memunmap_pages(), and devm_release_mem_region() when the resources can +be tied to a ``struct device``. + +The overall migration steps are similar to migrating NUMA pages within system +memory (see :ref:`Page migration <page_migration>`) but the steps are split +between device driver specific code and shared common code: + +1. ``mmap_read_lock()`` + + The device driver has to pass a ``struct vm_area_struct`` to + migrate_vma_setup() so the mmap_read_lock() or mmap_write_lock() needs to + be held for the duration of the migration. + +2. ``migrate_vma_setup(struct migrate_vma *args)`` + + The device driver initializes the ``struct migrate_vma`` fields and passes + the pointer to migrate_vma_setup(). The ``args->flags`` field is used to + filter which source pages should be migrated. For example, setting + ``MIGRATE_VMA_SELECT_SYSTEM`` will only migrate system memory and + ``MIGRATE_VMA_SELECT_DEVICE_PRIVATE`` will only migrate pages residing in + device private memory. If the latter flag is set, the ``args->pgmap_owner`` + field is used to identify device private pages owned by the driver. This + avoids trying to migrate device private pages residing in other devices. + Currently only anonymous private VMA ranges can be migrated to or from + system memory and device private memory. + + One of the first steps migrate_vma_setup() does is to invalidate other + device's MMUs with the ``mmu_notifier_invalidate_range_start(()`` and + ``mmu_notifier_invalidate_range_end()`` calls around the page table + walks to fill in the ``args->src`` array with PFNs to be migrated. + The ``invalidate_range_start()`` callback is passed a + ``struct mmu_notifier_range`` with the ``event`` field set to + ``MMU_NOTIFY_MIGRATE`` and the ``migrate_pgmap_owner`` field set to + the ``args->pgmap_owner`` field passed to migrate_vma_setup(). This is + allows the device driver to skip the invalidation callback and only + invalidate device private MMU mappings that are actually migrating. + This is explained more in the next section. + + While walking the page tables, a ``pte_none()`` or ``is_zero_pfn()`` + entry results in a valid "zero" PFN stored in the ``args->src`` array. + This lets the driver allocate device private memory and clear it instead + of copying a page of zeros. Valid PTE entries to system memory or + device private struct pages will be locked with ``lock_page()``, isolated + from the LRU (if system memory since device private pages are not on + the LRU), unmapped from the process, and a special migration PTE is + inserted in place of the original PTE. + migrate_vma_setup() also clears the ``args->dst`` array. + +3. The device driver allocates destination pages and copies source pages to + destination pages. + + The driver checks each ``src`` entry to see if the ``MIGRATE_PFN_MIGRATE`` + bit is set and skips entries that are not migrating. The device driver + can also choose to skip migrating a page by not filling in the ``dst`` + array for that page. + + The driver then allocates either a device private struct page or a + system memory page, locks the page with ``lock_page()``, and fills in the + ``dst`` array entry with:: + + dst[i] = migrate_pfn(page_to_pfn(dpage)) | MIGRATE_PFN_LOCKED; + + Now that the driver knows that this page is being migrated, it can + invalidate device private MMU mappings and copy device private memory + to system memory or another device private page. The core Linux kernel + handles CPU page table invalidations so the device driver only has to + invalidate its own MMU mappings. + + The driver can use ``migrate_pfn_to_page(src[i])`` to get the + ``struct page`` of the source and either copy the source page to the + destination or clear the destination device private memory if the pointer + is ``NULL`` meaning the source page was not populated in system memory. + +4. ``migrate_vma_pages()`` + + This step is where the migration is actually "committed". + + If the source page was a ``pte_none()`` or ``is_zero_pfn()`` page, this + is where the newly allocated page is inserted into the CPU's page table. + This can fail if a CPU thread faults on the same page. However, the page + table is locked and only one of the new pages will be inserted. + The device driver will see that the ``MIGRATE_PFN_MIGRATE`` bit is cleared + if it loses the race. + + If the source page was locked, isolated, etc. the source ``struct page`` + information is now copied to destination ``struct page`` finalizing the + migration on the CPU side. + +5. Device driver updates device MMU page tables for pages still migrating, + rolling back pages not migrating. + + If the ``src`` entry still has ``MIGRATE_PFN_MIGRATE`` bit set, the device + driver can update the device MMU and set the write enable bit if the + ``MIGRATE_PFN_WRITE`` bit is set. + +6. ``migrate_vma_finalize()`` + + This step replaces the special migration page table entry with the new + page's page table entry and releases the reference to the source and + destination ``struct page``. + +7. ``mmap_read_unlock()`` + + The lock can now be released. Memory cgroup (memcg) and rss accounting ======================================== diff --git a/Documentation/vm/index.rst b/Documentation/vm/index.rst index 611140ffef7e..eff5fbd492d0 100644 --- a/Documentation/vm/index.rst +++ b/Documentation/vm/index.rst @@ -29,6 +29,7 @@ descriptions of data structures and algorithms. :maxdepth: 1 active_mm + arch_pgtable_helpers balance cleancache free_page_reporting diff --git a/Documentation/vm/ksm.rst b/Documentation/vm/ksm.rst index d1b7270ad55c..9e37add068e6 100644 --- a/Documentation/vm/ksm.rst +++ b/Documentation/vm/ksm.rst @@ -26,7 +26,7 @@ tree. If a KSM page is shared between less than ``max_page_sharing`` VMAs, the node of the stable tree that represents such KSM page points to a -list of :c:type:`struct rmap_item` and the ``page->mapping`` of the +list of struct rmap_item and the ``page->mapping`` of the KSM page points to the stable tree node. When the sharing passes this threshold, KSM adds a second dimension to diff --git a/Documentation/vm/memory-model.rst b/Documentation/vm/memory-model.rst index 769449734573..9daadf9faba1 100644 --- a/Documentation/vm/memory-model.rst +++ b/Documentation/vm/memory-model.rst @@ -24,7 +24,7 @@ whether it is possible to manually override that default. although it is still in use by several architectures. All the memory models track the status of physical page frames using -:c:type:`struct page` arranged in one or more arrays. +struct page arranged in one or more arrays. Regardless of the selected memory model, there exists one-to-one mapping between the physical page frame number (PFN) and the @@ -111,7 +111,7 @@ maps for non-volatile memory devices and deferred initialization of the memory map for larger systems. The SPARSEMEM model presents the physical memory as a collection of -sections. A section is represented with :c:type:`struct mem_section` +sections. A section is represented with struct mem_section that contains `section_mem_map` that is, logically, a pointer to an array of struct pages. However, it is stored with some other magic that aids the sections management. The section size and maximal number @@ -172,7 +172,7 @@ management. The virtually mapped memory map allows storing `struct page` objects for persistent memory devices in pre-allocated storage on those -devices. This storage is represented with :c:type:`struct vmem_altmap` +devices. This storage is represented with struct vmem_altmap that is eventually passed to vmemmap_populate() through a long chain of function calls. The vmemmap_populate() implementation may use the `vmem_altmap` along with :c:func:`vmemmap_alloc_block_buf` helper to diff --git a/Documentation/vm/mmu_notifier.rst b/Documentation/vm/mmu_notifier.rst index 47baa1cf28c5..df5d7777fc6b 100644 --- a/Documentation/vm/mmu_notifier.rst +++ b/Documentation/vm/mmu_notifier.rst @@ -89,7 +89,7 @@ they are write protected for COW (other case of B apply too). So here because at time N+2 the clear page table entry was not pair with a notification to invalidate the secondary TLB, the device see the new value for -addrB before seing the new value for addrA. This break total memory ordering +addrB before seeing the new value for addrA. This break total memory ordering for the device. When changing a pte to write protect or to point to a new write protected page diff --git a/Documentation/vm/page_migration.rst b/Documentation/vm/page_migration.rst index 68883ac485fa..db9d7e5539cb 100644 --- a/Documentation/vm/page_migration.rst +++ b/Documentation/vm/page_migration.rst @@ -4,25 +4,28 @@ Page migration ============== -Page migration allows the moving of the physical location of pages between -nodes in a numa system while the process is running. This means that the +Page migration allows moving the physical location of pages between +nodes in a NUMA system while the process is running. This means that the virtual addresses that the process sees do not change. However, the system rearranges the physical location of those pages. -The main intend of page migration is to reduce the latency of memory access +Also see :ref:`Heterogeneous Memory Management (HMM) <hmm>` +for migrating pages to or from device private memory. + +The main intent of page migration is to reduce the latency of memory accesses by moving pages near to the processor where the process accessing that memory is running. Page migration allows a process to manually relocate the node on which its pages are located through the MF_MOVE and MF_MOVE_ALL options while setting -a new memory policy via mbind(). The pages of process can also be relocated +a new memory policy via mbind(). The pages of a process can also be relocated from another process using the sys_migrate_pages() function call. The -migrate_pages function call takes two sets of nodes and moves pages of a +migrate_pages() function call takes two sets of nodes and moves pages of a process that are located on the from nodes to the destination nodes. Page migration functions are provided by the numactl package by Andi Kleen (a version later than 0.9.3 is required. Get it from -ftp://oss.sgi.com/www/projects/libnuma/download/). numactl provides libnuma -which provides an interface similar to other numa functionality for page +https://github.com/numactl/numactl.git). numactl provides libnuma +which provides an interface similar to other NUMA functionality for page migration. cat ``/proc/<pid>/numa_maps`` allows an easy review of where the pages of a process are located. See also the numa_maps documentation in the proc(5) man page. @@ -30,19 +33,19 @@ proc(5) man page. Manual migration is useful if for example the scheduler has relocated a process to a processor on a distant node. A batch scheduler or an administrator may detect the situation and move the pages of the process -nearer to the new processor. The kernel itself does only provide +nearer to the new processor. The kernel itself only provides manual page migration support. Automatic page migration may be implemented through user space processes that move pages. A special function call "move_pages" allows the moving of individual pages within a process. -A NUMA profiler may f.e. obtain a log showing frequent off node +For example, A NUMA profiler may obtain a log showing frequent off-node accesses and may use the result to move pages to more advantageous locations. Larger installations usually partition the system using cpusets into sections of nodes. Paul Jackson has equipped cpusets with the ability to move pages when a task is moved to another cpuset (See -Documentation/admin-guide/cgroup-v1/cpusets.rst). -Cpusets allows the automation of process locality. If a task is moved to +:ref:`CPUSETS <cpusets>`). +Cpusets allow the automation of process locality. If a task is moved to a new cpuset then also all its pages are moved with it so that the performance of the process does not sink dramatically. Also the pages of processes in a cpuset are moved if the allowed memory nodes of a @@ -67,9 +70,9 @@ In kernel use of migrate_pages() Lists of pages to be migrated are generated by scanning over pages and moving them into lists. This is done by calling isolate_lru_page(). - Calling isolate_lru_page increases the references to the page + Calling isolate_lru_page() increases the references to the page so that it cannot vanish while the page migration occurs. - It also prevents the swapper or other scans to encounter + It also prevents the swapper or other scans from encountering the page. 2. We need to have a function of type new_page_t that can be @@ -91,23 +94,24 @@ is increased so that the page cannot be freed while page migration occurs. Steps: -1. Lock the page to be migrated +1. Lock the page to be migrated. 2. Ensure that writeback is complete. 3. Lock the new page that we want to move to. It is locked so that accesses to - this (not yet uptodate) page immediately lock while the move is in progress. + this (not yet up-to-date) page immediately block while the move is in progress. 4. All the page table references to the page are converted to migration entries. This decreases the mapcount of a page. If the resulting mapcount is not zero then we do not migrate the page. All user space - processes that attempt to access the page will now wait on the page lock. + processes that attempt to access the page will now wait on the page lock + or wait for the migration page table entry to be removed. 5. The i_pages lock is taken. This will cause all processes trying to access the page via the mapping to block on the spinlock. -6. The refcount of the page is examined and we back out if references remain - otherwise we know that we are the only one referencing this page. +6. The refcount of the page is examined and we back out if references remain. + Otherwise, we know that we are the only one referencing this page. 7. The radix tree is checked and if it does not contain the pointer to this page then we back out because someone else modified the radix tree. @@ -134,124 +138,124 @@ Steps: 15. Queued up writeback on the new page is triggered. -16. If migration entries were page then replace them with real ptes. Doing - so will enable access for user space processes not already waiting for - the page lock. +16. If migration entries were inserted into the page table, then replace them + with real ptes. Doing so will enable access for user space processes not + already waiting for the page lock. -19. The page locks are dropped from the old and new page. +17. The page locks are dropped from the old and new page. Processes waiting on the page lock will redo their page faults and will reach the new page. -20. The new page is moved to the LRU and can be scanned by the swapper - etc again. +18. The new page is moved to the LRU and can be scanned by the swapper, + etc. again. Non-LRU page migration ====================== -Although original migration aimed for reducing the latency of memory access -for NUMA, compaction who want to create high-order page is also main customer. +Although migration originally aimed for reducing the latency of memory accesses +for NUMA, compaction also uses migration to create high-order pages. Current problem of the implementation is that it is designed to migrate only -*LRU* pages. However, there are potential non-lru pages which can be migrated +*LRU* pages. However, there are potential non-LRU pages which can be migrated in drivers, for example, zsmalloc, virtio-balloon pages. For virtio-balloon pages, some parts of migration code path have been hooked up and added virtio-balloon specific functions to intercept migration logics. It's too specific to a driver so other drivers who want to make their pages -movable would have to add own specific hooks in migration path. +movable would have to add their own specific hooks in the migration path. -To overclome the problem, VM supports non-LRU page migration which provides +To overcome the problem, VM supports non-LRU page migration which provides generic functions for non-LRU movable pages without driver specific hooks -migration path. +in the migration path. -If a driver want to make own pages movable, it should define three functions +If a driver wants to make its pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. ``bool (*isolate_page) (struct page *page, isolate_mode_t mode);`` - What VM expects on isolate_page function of driver is to return *true* - if driver isolates page successfully. On returing true, VM marks the page + What VM expects from isolate_page() function of driver is to return *true* + if driver isolates the page successfully. On returning true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver - shouldn't expect to preserve values in that fields. + shouldn't expect to preserve values in those fields. 2. ``int (*migratepage) (struct address_space *mapping,`` | ``struct page *newpage, struct page *oldpage, enum migrate_mode);`` - After isolation, VM calls migratepage of driver with isolated page. - The function of migratepage is to move content of the old page to new page + After isolation, VM calls migratepage() of driver with the isolated page. + The function of migratepage() is to move the contents of the old page to the + new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() - under page_lock if you migrated the oldpage successfully and returns + under page_lock if you migrated the oldpage successfully and returned MIGRATEPAGE_SUCCESS. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time - because VM interprets -EAGAIN as "temporal migration failure". On returning - any error except -EAGAIN, VM will give up the page migration without retrying - in this time. + because VM interprets -EAGAIN as "temporary migration failure". On returning + any error except -EAGAIN, VM will give up the page migration without + retrying. - Driver shouldn't touch page.lru field VM using in the functions. + Driver shouldn't touch the page.lru field while in the migratepage() function. 3. ``void (*putback_page)(struct page *);`` - If migration fails on isolated page, VM should return the isolated page - to the driver so VM calls driver's putback_page with migration failed page. - In this function, driver should put the isolated page back to the own data + If migration fails on the isolated page, VM should return the isolated page + to the driver so VM calls the driver's putback_page() with the isolated page. + In this function, the driver should put the isolated page back into its own data structure. -4. non-lru movable page flags +4. non-LRU movable page flags - There are two page flags for supporting non-lru movable page. + There are two page flags for supporting non-LRU movable page. * PG_movable - Driver should use the below function to make page movable under page_lock:: + Driver should use the function below to make page movable under page_lock:: void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, - PG_movable is not a real flag of struct page. Rather than, VM - reuses page->mapping's lower bits to represent it. + PG_movable is not a real flag of struct page. Rather, VM + reuses the page->mapping's lower bits to represent it:: -:: #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should - use page_mapping which mask off the low two bits of page->mapping under - page lock so it can get right struct address_space. - - For testing of non-lru movable page, VM supports __PageMovable function. - However, it doesn't guarantee to identify non-lru movable page because - page->mapping field is unified with other variables in struct page. - As well, if driver releases the page after isolation by VM, page->mapping - doesn't have stable value although it has PAGE_MAPPING_MOVABLE - (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether - page is LRU or non-lru movable once the page has been isolated. Because - LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also - good for just peeking to test non-lru movable pages before more expensive - checking with lock_page in pfn scanning to select victim. - - For guaranteeing non-lru movable page, VM provides PageMovable function. - Unlike __PageMovable, PageMovable functions validates page->mapping and - mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden - destroying of page->mapping. - - Driver using __SetPageMovable should clear the flag via __ClearMovablePage - under page_lock before the releasing the page. + use page_mapping() which masks off the low two bits of page->mapping under + page lock so it can get the right struct address_space. + + For testing of non-LRU movable pages, VM supports __PageMovable() function. + However, it doesn't guarantee to identify non-LRU movable pages because + the page->mapping field is unified with other variables in struct page. + If the driver releases the page after isolation by VM, page->mapping + doesn't have a stable value although it has PAGE_MAPPING_MOVABLE set + (look at __ClearPageMovable). But __PageMovable() is cheap to call whether + page is LRU or non-LRU movable once the page has been isolated because LRU + pages can never have PAGE_MAPPING_MOVABLE set in page->mapping. It is also + good for just peeking to test non-LRU movable pages before more expensive + checking with lock_page() in pfn scanning to select a victim. + + For guaranteeing non-LRU movable page, VM provides PageMovable() function. + Unlike __PageMovable(), PageMovable() validates page->mapping and + mapping->a_ops->isolate_page under lock_page(). The lock_page() prevents + sudden destroying of page->mapping. + + Drivers using __SetPageMovable() should clear the flag via + __ClearMovablePage() under page_lock() before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page - as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru - movable page, it can skip it. Driver doesn't need to manipulate the flag - because VM will set/clear it automatically. Keep in mind that if driver - sees PG_isolated page, it means the page have been isolated by VM so it - shouldn't touch page.lru field. - PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag - for own purpose. + as PG_isolated under lock_page(). So if a CPU encounters PG_isolated + non-LRU movable page, it can skip it. Driver doesn't need to manipulate the + flag because VM will set/clear it automatically. Keep in mind that if the + driver sees a PG_isolated page, it means the page has been isolated by the + VM so it shouldn't touch the page.lru field. + The PG_isolated flag is aliased with the PG_reclaim flag so drivers + shouldn't use PG_isolated for its own purposes. Monitoring Migration ===================== @@ -266,8 +270,8 @@ The following events (counters) can be used to monitor page migration. 512. 2. PGMIGRATE_FAIL: Normal page migration failure. Same counting rules as for - _SUCCESS, above: this will be increased by the number of subpages, if it was - a THP. + PGMIGRATE_SUCCESS, above: this will be increased by the number of subpages, + if it was a THP. 3. THP_MIGRATION_SUCCESS: A THP was migrated without being split. diff --git a/Documentation/vm/page_owner.rst b/Documentation/vm/page_owner.rst index 079f3f8c4784..02deac76673f 100644 --- a/Documentation/vm/page_owner.rst +++ b/Documentation/vm/page_owner.rst @@ -18,7 +18,7 @@ Although we already have tracepoint for tracing page allocation/free, using it for analyzing who allocate each page is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace -buffer for later analysis and it would change system behviour with more +buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debugging. page owner can also be used for various purposes. For example, accurate diff --git a/Documentation/vm/slub.rst b/Documentation/vm/slub.rst index 289d231cee97..03f294a638bd 100644 --- a/Documentation/vm/slub.rst +++ b/Documentation/vm/slub.rst @@ -378,7 +378,7 @@ c) Execute ``slabinfo-gnuplot.sh`` in '-t' mode, passing all of the can go unnoticed. To deal with that, ``slabinfo-gnuplot.sh`` has two options to 'zoom-in'/'zoom-out': - a) ``-s %d,%d`` -- overwrites the default image width and heigh + a) ``-s %d,%d`` -- overwrites the default image width and height b) ``-r %d,%d`` -- specifies a range of samples to use (for example, in ``slabinfo -X >> FOO_STATS; sleep 1;`` case, using a ``-r 40,60`` range will plot only samples collected between 40th and diff --git a/Documentation/w1/slaves/w1_therm.rst b/Documentation/w1/slaves/w1_therm.rst index cc4edae17751..e39202e2b000 100644 --- a/Documentation/w1/slaves/w1_therm.rst +++ b/Documentation/w1/slaves/w1_therm.rst @@ -6,6 +6,7 @@ Supported chips: * Maxim ds18*20 based temperature sensors. * Maxim ds1825 based temperature sensors. + * GXCAS GC20MH01 temperature sensor. Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru> @@ -13,8 +14,8 @@ Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Description ----------- -w1_therm provides basic temperature conversion for ds18*20 devices, and the -ds28ea00 device. +w1_therm provides basic temperature conversion for ds18*20, ds28ea00, GX20MH01 +devices. Supported family codes: @@ -26,59 +27,72 @@ W1_THERM_DS1825 0x3B W1_THERM_DS28EA00 0x42 ==================== ==== -Support is provided through the sysfs w1_slave file. Each open and -read sequence will initiate a temperature conversion then provide two +Support is provided through the sysfs entry ``w1_slave``. Each open and +read sequence will initiate a temperature conversion, then provide two lines of ASCII output. The first line contains the nine hex bytes read along with a calculated crc value and YES or NO if it matched. If the crc matched the returned values are retained. The second line displays the retained values along with a temperature in millidegrees Centigrade after t=. -Alternatively, temperature can be read using temperature sysfs, it -return only temperature in millidegrees Centigrade. +Alternatively, temperature can be read using ``temperature`` sysfs, it +returns only the temperature in millidegrees Centigrade. -A bulk read of all devices on the bus could be done writing 'trigger' -in the therm_bulk_read sysfs entry at w1_bus_master level. This will -sent the convert command on all devices on the bus, and if parasite -powered devices are detected on the bus (and strong pullup is enable +A bulk read of all devices on the bus could be done writing ``trigger`` +to ``therm_bulk_read`` entry at w1_bus_master level. This will +send the convert command to all devices on the bus, and if parasite +powered devices are detected on the bus (and strong pullup is enabled in the module), it will drive the line high during the longer conversion time required by parasited powered device on the line. Reading -therm_bulk_read will return 0 if no bulk conversion pending, +``therm_bulk_read`` will return 0 if no bulk conversion pending, -1 if at least one sensor still in conversion, 1 if conversion is complete but at least one sensor value has not been read yet. Result temperature is -then accessed by reading the temperature sysfs entry of each device, which +then accessed by reading the ``temperature`` entry of each device, which may return empty if conversion is still in progress. Note that if a bulk read is sent but one sensor is not read immediately, the next access to -temperature on this device will return the temperature measured at the +``temperature`` on this device will return the temperature measured at the time of issue of the bulk read command (not the current temperature). -Writing a value between 9 and 12 to the sysfs w1_slave file will change the -precision of the sensor for the next readings. This value is in (volatile) -SRAM, so it is reset when the sensor gets power-cycled. +A strong pullup will be applied during the conversion if required. -To store the current precision configuration into EEPROM, the value 0 -has to be written to the sysfs w1_slave file. Since the EEPROM has a limited -amount of writes (>50k), this command should be used wisely. +``conv_time`` is used to get current conversion time (read), and +adjust it (write). A temperature conversion time depends on the device type and +it's current resolution. Default conversion time is set by the driver according +to the device datasheet. A conversion time for many original device clones +deviate from datasheet specs. There are three options: 1) manually set the +correct conversion time by writing a value in milliseconds to ``conv_time``; 2) +auto measure and set a conversion time by writing ``1`` to +``conv_time``; 3) use ``features`` to enable poll for conversion +completion. Options 2, 3 can't be used in parasite power mode. To get back to +the default conversion time write ``0`` to ``conv_time``. -Alternatively, resolution can be set or read (value from 9 to 12) using the -dedicated resolution sysfs entry on each device. This sysfs entry is not -present for devices not supporting this feature. Driver will adjust the -correct conversion time for each device regarding to its resolution setting. -In particular, strong pullup will be applied if required during the conversion -duration. +Writing a resolution value (in bits) to ``w1_slave`` will change the +precision of the sensor for the next readings. Allowed resolutions are defined by +the sensor. Resolution is reset when the sensor gets power-cycled. -The write-only sysfs entry eeprom is an alternative for EEPROM operations: - * 'save': will save device RAM to EEPROM - * 'restore': will restore EEPROM data in device RAM. +To store the current resolution in EEPROM, write ``0`` to ``w1_slave``. +Since the EEPROM has a limited amount of writes (>50k), this command should be +used wisely. -ext_power syfs entry allow tho check the power status of each device. - * '0': device parasite powered - * '1': device externally powered +Alternatively, resolution can be read or written using the dedicated +``resolution`` entry on each device, if supported by the sensor. -sysfs alarms allow read or write TH and TL (Temperature High an Low) alarms. +Some non-genuine DS18B20 chips are fixed in 12-bit mode only, so the actual +resolution is read back from the chip and verified. + +Note: Changing the resolution reverts the conversion time to default. + +The write-only sysfs entry ``eeprom`` is an alternative for EEPROM operations. +Write ``save`` to save device RAM to EEPROM. Write ``restore`` to restore EEPROM +data in device RAM. + +``ext_power`` entry allows checking the power state of each device. Reads +``0`` if the device is parasite powered, ``1`` if the device is externally powered. + +Sysfs ``alarms`` allow read or write TH and TL (Temperature High an Low) alarms. Values shall be space separated and in the device range (typical -55 degC to 125 degC). Values are integer as they are store in a 8bit register in -the device. Lowest value is automatically put to TL.Once set, alarms could +the device. Lowest value is automatically put to TL. Once set, alarms could be search at master level. The module parameter strong_pullup can be set to 0 to disable the @@ -102,5 +116,24 @@ The DS28EA00 provides an additional two pins for implementing a sequence detection algorithm. This feature allows you to determine the physical location of the chip in the 1-wire bus without needing pre-existing knowledge of the bus ordering. Support is provided through the sysfs -w1_seq file. The file will contain a single line with an integer value +``w1_seq``. The file will contain a single line with an integer value representing the device index in the bus starting at 0. + +``features`` sysfs entry controls optional driver settings per device. +Insufficient power in parasite mode, line noise and insufficient conversion +time may lead to conversion failure. Original DS18B20 and some clones allow for +detection of invalid conversion. Write bit mask ``1`` to ``features`` to enable +checking the conversion success. If byte 6 of scratchpad memory is 0xC after +conversion and temperature reads 85.00 (powerup value) or 127.94 (insufficient +power), the driver returns a conversion error. Bit mask ``2`` enables poll for +conversion completion (normal power only) by generating read cycles on the bus +after conversion starts. In parasite power mode this feature is not available. +Feature bit masks may be combined (OR). More details in +Documentation/ABI/testing/sysfs-driver-w1_therm + +GX20MH01 device shares family number 0x28 with DS18*20. The device is generally +compatible with DS18B20. Added are lowest 2\ :sup:`-5`, 2\ :sup:`-6` temperature +bits in Config register; R2 bit in Config register enabling 13 and 14 bit +resolutions. The device is powered up in 14-bit resolution mode. The conversion +times specified in the datasheet are too low and have to be increased. The +device supports driver features ``1`` and ``2``. diff --git a/Documentation/watch_queue.rst b/Documentation/watch_queue.rst index 849fad6893ef..54f13ad5fc17 100644 --- a/Documentation/watch_queue.rst +++ b/Documentation/watch_queue.rst @@ -103,8 +103,10 @@ watch that specific key). To manage a watch list, the following functions are provided: - * ``void init_watch_list(struct watch_list *wlist, - void (*release_watch)(struct watch *wlist));`` + * :: + + void init_watch_list(struct watch_list *wlist, + void (*release_watch)(struct watch *wlist)); Initialise a watch list. If ``release_watch`` is not NULL, then this indicates a function that should be called when the watch_list object is @@ -179,9 +181,11 @@ The following functions are provided to manage watches: driver-settable fields in the watch struct must have been set before this is called. - * ``int remove_watch_from_object(struct watch_list *wlist, - struct watch_queue *wqueue, - u64 id, false);`` + * :: + + int remove_watch_from_object(struct watch_list *wlist, + struct watch_queue *wqueue, + u64 id, false); Remove a watch from a watch list, where the watch must match the specified watch queue (``wqueue``) and object identifier (``id``). A notification diff --git a/Documentation/x86/boot.rst b/Documentation/x86/boot.rst index 7fafc7ac00d7..abb9fc164657 100644 --- a/Documentation/x86/boot.rst +++ b/Documentation/x86/boot.rst @@ -1342,8 +1342,8 @@ follow:: In addition to read/modify/write the setup header of the struct boot_params as that of 16-bit boot protocol, the boot loader should -also fill the additional fields of the struct boot_params as that -described in zero-page.txt. +also fill the additional fields of the struct boot_params as +described in chapter :doc:`zero-page`. After setting up the struct boot_params, the boot loader can load the 32/64-bit kernel in the same way as that of 16-bit boot protocol. @@ -1379,7 +1379,7 @@ can be calculated as follows:: In addition to read/modify/write the setup header of the struct boot_params as that of 16-bit boot protocol, the boot loader should also fill the additional fields of the struct boot_params as described -in zero-page.txt. +in chapter :doc:`zero-page`. After setting up the struct boot_params, the boot loader can load 64-bit kernel in the same way as that of 16-bit boot protocol, but diff --git a/Documentation/x86/booting-dt.rst b/Documentation/x86/booting-dt.rst new file mode 100644 index 000000000000..965a374071ab --- /dev/null +++ b/Documentation/x86/booting-dt.rst @@ -0,0 +1,21 @@ +.. SPDX-License-Identifier: GPL-2.0 + +DeviceTree Booting +------------------ + + There is one single 32bit entry point to the kernel at code32_start, + the decompressor (the real mode entry point goes to the same 32bit + entry point once it switched into protected mode). That entry point + supports one calling convention which is documented in + Documentation/x86/boot.rst + The physical pointer to the device-tree block is passed via setup_data + which requires at least boot protocol 2.09. + The type filed is defined as + + #define SETUP_DTB 2 + + This device-tree is used as an extension to the "boot page". As such it + does not parse / consider data which is already covered by the boot + page. This includes memory size, reserved ranges, command line arguments + or initrd address. It simply holds information which can not be retrieved + otherwise like interrupt routing or a list of devices behind an I2C bus. diff --git a/Documentation/x86/cpuinfo.rst b/Documentation/x86/cpuinfo.rst new file mode 100644 index 000000000000..5d54c39a063f --- /dev/null +++ b/Documentation/x86/cpuinfo.rst @@ -0,0 +1,155 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +x86 Feature Flags +================= + +Introduction +============ + +On x86, flags appearing in /proc/cpuinfo have an X86_FEATURE definition +in arch/x86/include/asm/cpufeatures.h. If the kernel cares about a feature +or KVM want to expose the feature to a KVM guest, it can and should have +an X86_FEATURE_* defined. These flags represent hardware features as +well as software features. + +If users want to know if a feature is available on a given system, they +try to find the flag in /proc/cpuinfo. If a given flag is present, it +means that the kernel supports it and is currently making it available. +If such flag represents a hardware feature, it also means that the +hardware supports it. + +If the expected flag does not appear in /proc/cpuinfo, things are murkier. +Users need to find out the reason why the flag is missing and find the way +how to enable it, which is not always easy. There are several factors that +can explain missing flags: the expected feature failed to enable, the feature +is missing in hardware, platform firmware did not enable it, the feature is +disabled at build or run time, an old kernel is in use, or the kernel does +not support the feature and thus has not enabled it. In general, /proc/cpuinfo +shows features which the kernel supports. For a full list of CPUID flags +which the CPU supports, use tools/arch/x86/kcpuid. + +How are feature flags created? +============================== + +a: Feature flags can be derived from the contents of CPUID leaves. +------------------------------------------------------------------ +These feature definitions are organized mirroring the layout of CPUID +leaves and grouped in words with offsets as mapped in enum cpuid_leafs +in cpufeatures.h (see arch/x86/include/asm/cpufeatures.h for details). +If a feature is defined with a X86_FEATURE_<name> definition in +cpufeatures.h, and if it is detected at run time, the flags will be +displayed accordingly in /proc/cpuinfo. For example, the flag "avx2" +comes from X86_FEATURE_AVX2 in cpufeatures.h. + +b: Flags can be from scattered CPUID-based features. +---------------------------------------------------- +Hardware features enumerated in sparsely populated CPUID leaves get +software-defined values. Still, CPUID needs to be queried to determine +if a given feature is present. This is done in init_scattered_cpuid_features(). +For instance, X86_FEATURE_CQM_LLC is defined as 11*32 + 0 and its presence is +checked at runtime in the respective CPUID leaf [EAX=f, ECX=0] bit EDX[1]. + +The intent of scattering CPUID leaves is to not bloat struct +cpuinfo_x86.x86_capability[] unnecessarily. For instance, the CPUID leaf +[EAX=7, ECX=0] has 30 features and is dense, but the CPUID leaf [EAX=7, EAX=1] +has only one feature and would waste 31 bits of space in the x86_capability[] +array. Since there is a struct cpuinfo_x86 for each possible CPU, the wasted +memory is not trivial. + +c: Flags can be created synthetically under certain conditions for hardware features. +------------------------------------------------------------------------------------- +Examples of conditions include whether certain features are present in +MSR_IA32_CORE_CAPS or specific CPU models are identified. If the needed +conditions are met, the features are enabled by the set_cpu_cap or +setup_force_cpu_cap macros. For example, if bit 5 is set in MSR_IA32_CORE_CAPS, +the feature X86_FEATURE_SPLIT_LOCK_DETECT will be enabled and +"split_lock_detect" will be displayed. The flag "ring3mwait" will be +displayed only when running on INTEL_FAM6_XEON_PHI_[KNL|KNM] processors. + +d: Flags can represent purely software features. +------------------------------------------------ +These flags do not represent hardware features. Instead, they represent a +software feature implemented in the kernel. For example, Kernel Page Table +Isolation is purely software feature and its feature flag X86_FEATURE_PTI is +also defined in cpufeatures.h. + +Naming of Flags +=============== + +The script arch/x86/kernel/cpu/mkcapflags.sh processes the +#define X86_FEATURE_<name> from cpufeatures.h and generates the +x86_cap/bug_flags[] arrays in kernel/cpu/capflags.c. The names in the +resulting x86_cap/bug_flags[] are used to populate /proc/cpuinfo. The naming +of flags in the x86_cap/bug_flags[] are as follows: + +a: The name of the flag is from the string in X86_FEATURE_<name> by default. +---------------------------------------------------------------------------- +By default, the flag <name> in /proc/cpuinfo is extracted from the respective +X86_FEATURE_<name> in cpufeatures.h. For example, the flag "avx2" is from +X86_FEATURE_AVX2. + +b: The naming can be overridden. +-------------------------------- +If the comment on the line for the #define X86_FEATURE_* starts with a +double-quote character (""), the string inside the double-quote characters +will be the name of the flags. For example, the flag "sse4_1" comes from +the comment "sse4_1" following the X86_FEATURE_XMM4_1 definition. + +There are situations in which overriding the displayed name of the flag is +needed. For instance, /proc/cpuinfo is a userspace interface and must remain +constant. If, for some reason, the naming of X86_FEATURE_<name> changes, one +shall override the new naming with the name already used in /proc/cpuinfo. + +c: The naming override can be "", which means it will not appear in /proc/cpuinfo. +---------------------------------------------------------------------------------- +The feature shall be omitted from /proc/cpuinfo if it does not make sense for +the feature to be exposed to userspace. For example, X86_FEATURE_ALWAYS is +defined in cpufeatures.h but that flag is an internal kernel feature used +in the alternative runtime patching functionality. So, its name is overridden +with "". Its flag will not appear in /proc/cpuinfo. + +Flags are missing when one or more of these happen +================================================== + +a: The hardware does not enumerate support for it. +-------------------------------------------------- +For example, when a new kernel is running on old hardware or the feature is +not enabled by boot firmware. Even if the hardware is new, there might be a +problem enabling the feature at run time, the flag will not be displayed. + +b: The kernel does not know about the flag. +------------------------------------------- +For example, when an old kernel is running on new hardware. + +c: The kernel disabled support for it at compile-time. +------------------------------------------------------ +For example, if 5-level-paging is not enabled when building (i.e., +CONFIG_X86_5LEVEL is not selected) the flag "la57" will not show up [#f1]_. +Even though the feature will still be detected via CPUID, the kernel disables +it by clearing via setup_clear_cpu_cap(X86_FEATURE_LA57). + +d: The feature is disabled at boot-time. +---------------------------------------- +A feature can be disabled either using a command-line parameter or because +it failed to be enabled. The command-line parameter clearcpuid= can be used +to disable features using the feature number as defined in +/arch/x86/include/asm/cpufeatures.h. For instance, User Mode Instruction +Protection can be disabled using clearcpuid=514. The number 514 is calculated +from #define X86_FEATURE_UMIP (16*32 + 2). + +In addition, there exists a variety of custom command-line parameters that +disable specific features. The list of parameters includes, but is not limited +to, nofsgsbase, nosmap, and nosmep. 5-level paging can also be disabled using +"no5lvl". SMAP and SMEP are disabled with the aforementioned parameters, +respectively. + +e: The feature was known to be non-functional. +---------------------------------------------- +The feature was known to be non-functional because a dependency was +missing at runtime. For example, AVX flags will not show up if XSAVE feature +is disabled since they depend on XSAVE feature. Another example would be broken +CPUs and them missing microcode patches. Due to that, the kernel decides not to +enable a feature. + +.. [#f1] 5-level paging uses linear address of 57 bits. diff --git a/Documentation/x86/index.rst b/Documentation/x86/index.rst index 265d9e9a093b..b224d12c880b 100644 --- a/Documentation/x86/index.rst +++ b/Documentation/x86/index.rst @@ -9,6 +9,8 @@ x86-specific Documentation :numbered: boot + booting-dt + cpuinfo topology exception-tables kernel-stacks @@ -30,3 +32,4 @@ x86-specific Documentation usb-legacy-support i386/index x86_64/index + sva diff --git a/Documentation/x86/resctrl_ui.rst b/Documentation/x86/resctrl_ui.rst index 5368cedfb530..e59b7b93a9b4 100644 --- a/Documentation/x86/resctrl_ui.rst +++ b/Documentation/x86/resctrl_ui.rst @@ -138,6 +138,18 @@ with respect to allocation: non-linear. This field is purely informational only. +"thread_throttle_mode": + Indicator on Intel systems of how tasks running on threads + of a physical core are throttled in cases where they + request different memory bandwidth percentages: + + "max": + the smallest percentage is applied + to all threads + "per-thread": + bandwidth percentages are directly applied to + the threads running on the core + If RDT monitoring is available there will be an "L3_MON" directory with the following files: @@ -364,8 +376,10 @@ to the next control step available on the hardware. The bandwidth throttling is a core specific mechanism on some of Intel SKUs. Using a high bandwidth and a low bandwidth setting on two threads -sharing a core will result in both threads being throttled to use the -low bandwidth. The fact that Memory bandwidth allocation(MBA) is a core +sharing a core may result in both threads being throttled to use the +low bandwidth (see "thread_throttle_mode"). + +The fact that Memory bandwidth allocation(MBA) may be a core specific mechanism where as memory bandwidth monitoring(MBM) is done at the package level may lead to confusion when users try to apply control via the MBA and then monitor the bandwidth to see if the controls are diff --git a/Documentation/x86/sva.rst b/Documentation/x86/sva.rst new file mode 100644 index 000000000000..076efd51ef1f --- /dev/null +++ b/Documentation/x86/sva.rst @@ -0,0 +1,257 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================== +Shared Virtual Addressing (SVA) with ENQCMD +=========================================== + +Background +========== + +Shared Virtual Addressing (SVA) allows the processor and device to use the +same virtual addresses avoiding the need for software to translate virtual +addresses to physical addresses. SVA is what PCIe calls Shared Virtual +Memory (SVM). + +In addition to the convenience of using application virtual addresses +by the device, it also doesn't require pinning pages for DMA. +PCIe Address Translation Services (ATS) along with Page Request Interface +(PRI) allow devices to function much the same way as the CPU handling +application page-faults. For more information please refer to the PCIe +specification Chapter 10: ATS Specification. + +Use of SVA requires IOMMU support in the platform. IOMMU is also +required to support the PCIe features ATS and PRI. ATS allows devices +to cache translations for virtual addresses. The IOMMU driver uses the +mmu_notifier() support to keep the device TLB cache and the CPU cache in +sync. When an ATS lookup fails for a virtual address, the device should +use the PRI in order to request the virtual address to be paged into the +CPU page tables. The device must use ATS again in order the fetch the +translation before use. + +Shared Hardware Workqueues +========================== + +Unlike Single Root I/O Virtualization (SR-IOV), Scalable IOV (SIOV) permits +the use of Shared Work Queues (SWQ) by both applications and Virtual +Machines (VM's). This allows better hardware utilization vs. hard +partitioning resources that could result in under utilization. In order to +allow the hardware to distinguish the context for which work is being +executed in the hardware by SWQ interface, SIOV uses Process Address Space +ID (PASID), which is a 20-bit number defined by the PCIe SIG. + +PASID value is encoded in all transactions from the device. This allows the +IOMMU to track I/O on a per-PASID granularity in addition to using the PCIe +Resource Identifier (RID) which is the Bus/Device/Function. + + +ENQCMD +====== + +ENQCMD is a new instruction on Intel platforms that atomically submits a +work descriptor to a device. The descriptor includes the operation to be +performed, virtual addresses of all parameters, virtual address of a completion +record, and the PASID (process address space ID) of the current process. + +ENQCMD works with non-posted semantics and carries a status back if the +command was accepted by hardware. This allows the submitter to know if the +submission needs to be retried or other device specific mechanisms to +implement fairness or ensure forward progress should be provided. + +ENQCMD is the glue that ensures applications can directly submit commands +to the hardware and also permits hardware to be aware of application context +to perform I/O operations via use of PASID. + +Process Address Space Tagging +============================= + +A new thread-scoped MSR (IA32_PASID) provides the connection between +user processes and the rest of the hardware. When an application first +accesses an SVA-capable device, this MSR is initialized with a newly +allocated PASID. The driver for the device calls an IOMMU-specific API +that sets up the routing for DMA and page-requests. + +For example, the Intel Data Streaming Accelerator (DSA) uses +iommu_sva_bind_device(), which will do the following: + +- Allocate the PASID, and program the process page-table (%cr3 register) in the + PASID context entries. +- Register for mmu_notifier() to track any page-table invalidations to keep + the device TLB in sync. For example, when a page-table entry is invalidated, + the IOMMU propagates the invalidation to the device TLB. This will force any + future access by the device to this virtual address to participate in + ATS. If the IOMMU responds with proper response that a page is not + present, the device would request the page to be paged in via the PCIe PRI + protocol before performing I/O. + +This MSR is managed with the XSAVE feature set as "supervisor state" to +ensure the MSR is updated during context switch. + +PASID Management +================ + +The kernel must allocate a PASID on behalf of each process which will use +ENQCMD and program it into the new MSR to communicate the process identity to +platform hardware. ENQCMD uses the PASID stored in this MSR to tag requests +from this process. When a user submits a work descriptor to a device using the +ENQCMD instruction, the PASID field in the descriptor is auto-filled with the +value from MSR_IA32_PASID. Requests for DMA from the device are also tagged +with the same PASID. The platform IOMMU uses the PASID in the transaction to +perform address translation. The IOMMU APIs setup the corresponding PASID +entry in IOMMU with the process address used by the CPU (e.g. %cr3 register in +x86). + +The MSR must be configured on each logical CPU before any application +thread can interact with a device. Threads that belong to the same +process share the same page tables, thus the same MSR value. + +PASID is cleared when a process is created. The PASID allocation and MSR +programming may occur long after a process and its threads have been created. +One thread must call iommu_sva_bind_device() to allocate the PASID for the +process. If a thread uses ENQCMD without the MSR first being populated, a #GP +will be raised. The kernel will update the PASID MSR with the PASID for all +threads in the process. A single process PASID can be used simultaneously +with multiple devices since they all share the same address space. + +One thread can call iommu_sva_unbind_device() to free the allocated PASID. +The kernel will clear the PASID MSR for all threads belonging to the process. + +New threads inherit the MSR value from the parent. + +Relationships +============= + + * Each process has many threads, but only one PASID. + * Devices have a limited number (~10's to 1000's) of hardware workqueues. + The device driver manages allocating hardware workqueues. + * A single mmap() maps a single hardware workqueue as a "portal" and + each portal maps down to a single workqueue. + * For each device with which a process interacts, there must be + one or more mmap()'d portals. + * Many threads within a process can share a single portal to access + a single device. + * Multiple processes can separately mmap() the same portal, in + which case they still share one device hardware workqueue. + * The single process-wide PASID is used by all threads to interact + with all devices. There is not, for instance, a PASID for each + thread or each thread<->device pair. + +FAQ +=== + +* What is SVA/SVM? + +Shared Virtual Addressing (SVA) permits I/O hardware and the processor to +work in the same address space, i.e., to share it. Some call it Shared +Virtual Memory (SVM), but Linux community wanted to avoid confusing it with +POSIX Shared Memory and Secure Virtual Machines which were terms already in +circulation. + +* What is a PASID? + +A Process Address Space ID (PASID) is a PCIe-defined Transaction Layer Packet +(TLP) prefix. A PASID is a 20-bit number allocated and managed by the OS. +PASID is included in all transactions between the platform and the device. + +* How are shared workqueues different? + +Traditionally, in order for userspace applications to interact with hardware, +there is a separate hardware instance required per process. For example, +consider doorbells as a mechanism of informing hardware about work to process. +Each doorbell is required to be spaced 4k (or page-size) apart for process +isolation. This requires hardware to provision that space and reserve it in +MMIO. This doesn't scale as the number of threads becomes quite large. The +hardware also manages the queue depth for Shared Work Queues (SWQ), and +consumers don't need to track queue depth. If there is no space to accept +a command, the device will return an error indicating retry. + +A user should check Deferrable Memory Write (DMWr) capability on the device +and only submits ENQCMD when the device supports it. In the new DMWr PCIe +terminology, devices need to support DMWr completer capability. In addition, +it requires all switch ports to support DMWr routing and must be enabled by +the PCIe subsystem, much like how PCIe atomic operations are managed for +instance. + +SWQ allows hardware to provision just a single address in the device. When +used with ENQCMD to submit work, the device can distinguish the process +submitting the work since it will include the PASID assigned to that +process. This helps the device scale to a large number of processes. + +* Is this the same as a user space device driver? + +Communicating with the device via the shared workqueue is much simpler +than a full blown user space driver. The kernel driver does all the +initialization of the hardware. User space only needs to worry about +submitting work and processing completions. + +* Is this the same as SR-IOV? + +Single Root I/O Virtualization (SR-IOV) focuses on providing independent +hardware interfaces for virtualizing hardware. Hence, it's required to be +almost fully functional interface to software supporting the traditional +BARs, space for interrupts via MSI-X, its own register layout. +Virtual Functions (VFs) are assisted by the Physical Function (PF) +driver. + +Scalable I/O Virtualization builds on the PASID concept to create device +instances for virtualization. SIOV requires host software to assist in +creating virtual devices; each virtual device is represented by a PASID +along with the bus/device/function of the device. This allows device +hardware to optimize device resource creation and can grow dynamically on +demand. SR-IOV creation and management is very static in nature. Consult +references below for more details. + +* Why not just create a virtual function for each app? + +Creating PCIe SR-IOV type Virtual Functions (VF) is expensive. VFs require +duplicated hardware for PCI config space and interrupts such as MSI-X. +Resources such as interrupts have to be hard partitioned between VFs at +creation time, and cannot scale dynamically on demand. The VFs are not +completely independent from the Physical Function (PF). Most VFs require +some communication and assistance from the PF driver. SIOV, in contrast, +creates a software-defined device where all the configuration and control +aspects are mediated via the slow path. The work submission and completion +happen without any mediation. + +* Does this support virtualization? + +ENQCMD can be used from within a guest VM. In these cases, the VMM helps +with setting up a translation table to translate from Guest PASID to Host +PASID. Please consult the ENQCMD instruction set reference for more +details. + +* Does memory need to be pinned? + +When devices support SVA along with platform hardware such as IOMMU +supporting such devices, there is no need to pin memory for DMA purposes. +Devices that support SVA also support other PCIe features that remove the +pinning requirement for memory. + +Device TLB support - Device requests the IOMMU to lookup an address before +use via Address Translation Service (ATS) requests. If the mapping exists +but there is no page allocated by the OS, IOMMU hardware returns that no +mapping exists. + +Device requests the virtual address to be mapped via Page Request +Interface (PRI). Once the OS has successfully completed the mapping, it +returns the response back to the device. The device requests again for +a translation and continues. + +IOMMU works with the OS in managing consistency of page-tables with the +device. When removing pages, it interacts with the device to remove any +device TLB entry that might have been cached before removing the mappings from +the OS. + +References +========== + +VT-D: +https://01.org/blogs/ashokraj/2018/recent-enhancements-intel-virtualization-technology-directed-i/o-intel-vt-d + +SIOV: +https://01.org/blogs/2019/assignable-interfaces-intel-scalable-i/o-virtualization-linux + +ENQCMD in ISE: +https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf + +DSA spec: +https://software.intel.com/sites/default/files/341204-intel-data-streaming-accelerator-spec.pdf diff --git a/Documentation/x86/x86_64/boot-options.rst b/Documentation/x86/x86_64/boot-options.rst index 2b98efb5ba7f..324cefff92e7 100644 --- a/Documentation/x86/x86_64/boot-options.rst +++ b/Documentation/x86/x86_64/boot-options.rst @@ -173,6 +173,10 @@ NUMA numa=noacpi Don't parse the SRAT table for NUMA setup + numa=nohmat + Don't parse the HMAT table for NUMA setup, or soft-reserved memory + partitioning. + numa=fake=<size>[MG] If given as a memory unit, fills all system RAM with nodes of size interleaved over physical nodes. diff --git a/Documentation/x86/x86_64/mm.rst b/Documentation/x86/x86_64/mm.rst index e5053404a1ae..ede1875719fb 100644 --- a/Documentation/x86/x86_64/mm.rst +++ b/Documentation/x86/x86_64/mm.rst @@ -19,7 +19,7 @@ Complete virtual memory map with 4-level page tables Note that as we get closer to the top of the address space, the notation changes from TB to GB and then MB/KB. - - "16M TB" might look weird at first sight, but it's an easier to visualize size + - "16M TB" might look weird at first sight, but it's an easier way to visualize size notation than "16 EB", which few will recognize at first sight as 16 exabytes. It also shows it nicely how incredibly large 64-bit address space is. |
