2 files changed, 26 insertions, 27 deletions
diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
index 6805e157b6e8..ff98919faed7 100644
--- a/Documentation/scsi/index.rst
+++ b/Documentation/scsi/index.rst
@@ -39,5 +39,6 @@ Linux SCSI Subsystem
    scsi-parameters
    scsi
    sd-parameters
+   smartpqi
 
    scsi_transport_srp/figures
diff --git a/Documentation/scsi/smartpqi.txt b/Documentation/scsi/smartpqi.rst
index df129f55ace5..a7de27352c6f 100644
--- a/Documentation/scsi/smartpqi.txt
+++ b/Documentation/scsi/smartpqi.rst
@@ -1,6 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
 
+=====================================
 SMARTPQI - Microsemi Smart PQI Driver
------------------------------------------
+=====================================
 
 This file describes the smartpqi SCSI driver for Microsemi
 (http://www.microsemi.com) PQI controllers. The smartpqi driver
@@ -16,20 +18,21 @@ For Microsemi smartpqi controller support, enable the smartpqi driver
 when configuring the kernel.
 
 For more information on the PQI Queuing Interface, please see:
-http://www.t10.org/drafts.htm
-http://www.t10.org/members/w_pqi2.htm
 
-Supported devices:
-------------------
+- http://www.t10.org/drafts.htm
+- http://www.t10.org/members/w_pqi2.htm
+
+Supported devices
+=================
 <Controller names to be added as they become publicly available.>
 
 smartpqi specific entries in /sys
------------------------------
+=================================
 
-  smartpqi host attributes:
-  -------------------------
-  /sys/class/scsi_host/host*/rescan
-  /sys/class/scsi_host/host*/driver_version
+smartpqi host attributes
+------------------------
+  - /sys/class/scsi_host/host*/rescan
+  - /sys/class/scsi_host/host*/driver_version
 
   The host rescan attribute is a write only attribute. Writing to this
   attribute will trigger the driver to scan for new, changed, or removed
@@ -37,12 +40,13 @@ smartpqi specific entries in /sys
 
   The version attribute is read-only and will return the driver version
   and the controller firmware version.
-  For example:
+  For example::
+
               driver: 0.9.13-370
               firmware: 0.01-522
 
-  smartpqi sas device attributes
-  ------------------------------
+smartpqi sas device attributes
+------------------------------
   HBA devices are added to the SAS transport layer. These attributes are
   automatically added by the SAS transport layer.
 
@@ -50,31 +54,25 @@ smartpqi specific entries in /sys
   /sys/class/sas_device/end_device-X:X/enclosure_identifier
   /sys/class/sas_device/end_device-X:X/scsi_target_id
 
-smartpqi specific ioctls:
--------------------------
+smartpqi specific ioctls
+========================
 
   For compatibility with applications written for the cciss protocol.
 
-  CCISS_DEREGDISK
-  CCISS_REGNEWDISK
-  CCISS_REGNEWD
-
-  The above three ioctls all do exactly the same thing, which is to cause the driver
-  to rescan for new devices.  This does exactly the same thing as writing to the
-  smartpqi specific host "rescan" attribute.
+  CCISS_DEREGDISK, CCISS_REGNEWDISK, CCISS_REGNEWD
+	The above three ioctls all do exactly the same thing, which is to cause the driver
+	to rescan for new devices.  This does exactly the same thing as writing to the
+	smartpqi specific host "rescan" attribute.
 
   CCISS_GETPCIINFO
-
 	Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID).
 
   CCISS_GETDRIVVER
+	Returns driver version in three bytes encoded as::
 
-	Returns driver version in three bytes encoded as:
-	(DRIVER_MAJOR << 28) | (DRIVER_MINOR << 24) | (DRIVER_RELEASE << 16) | DRIVER_REVISION;
+	  (DRIVER_MAJOR << 28) | (DRIVER_MINOR << 24) | (DRIVER_RELEASE << 16) | DRIVER_REVISION;
 
   CCISS_PASSTHRU
-
 	Allows "BMIC" and "CISS" commands to be passed through to the Smart Storage Array.
 	These are used extensively by the SSA Array Configuration Utility, SNMP storage
 	agents, etc.
-