diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pwm')
4 files changed, 102 insertions, 79 deletions
diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 4cc3cc7c50be..66e400f2a3a4 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -25,7 +25,9 @@ properties: - const: allwinner,sun8i-a83t-pwm - const: allwinner,sun8i-h3-pwm - items: - - const: allwinner,sun8i-v3s-pwm + - enum: + - allwinner,suniv-f1c100s-pwm + - allwinner,sun8i-v3s-pwm - const: allwinner,sun7i-a20-pwm - items: - const: allwinner,sun50i-a64-pwm diff --git a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml index a7fae1772a81..cd8e9a8907f8 100644 --- a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml +++ b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml @@ -30,7 +30,9 @@ properties: maxItems: 1 "#pwm-cells": - const: 2 + enum: [2, 3] + description: + The only flag supported by the controller is PWM_POLARITY_INVERTED. microchip,sync-update-mask: description: | diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt deleted file mode 100644 index 74c41e34c3b6..000000000000 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ /dev/null @@ -1,77 +0,0 @@ -Tegra SoC PWFM controller - -Required properties: -- compatible: Must be: - - "nvidia,tegra20-pwm": for Tegra20 - - "nvidia,tegra30-pwm", "nvidia,tegra20-pwm": for Tegra30 - - "nvidia,tegra114-pwm", "nvidia,tegra20-pwm": for Tegra114 - - "nvidia,tegra124-pwm", "nvidia,tegra20-pwm": for Tegra124 - - "nvidia,tegra132-pwm", "nvidia,tegra20-pwm": for Tegra132 - - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210 - - "nvidia,tegra186-pwm": for Tegra186 - - "nvidia,tegra194-pwm": for Tegra194 -- reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of - the cells format. -- clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - pwm - -Optional properties: -============================ -In some of the interface like PWM based regulator device, it is required -to configure the pins differently in different states, especially in suspend -state of the system. The configuration of pin is provided via the pinctrl -DT node as detailed in the pinctrl DT binding document - Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -The PWM node will have following optional properties. -pinctrl-names: Pin state names. Must be "default" and "sleep". -pinctrl-0: phandle for the default/active state of pin configurations. -pinctrl-1: phandle for the sleep state of pin configurations. - -Example: - - pwm: pwm@7000a000 { - compatible = "nvidia,tegra20-pwm"; - reg = <0x7000a000 0x100>; - #pwm-cells = <2>; - clocks = <&tegra_car 17>; - resets = <&tegra_car 17>; - reset-names = "pwm"; - }; - - -Example with the pin configuration for suspend and resume: -========================================================= -Suppose pin PE7 (On Tegra210) interfaced with the regulator device and -it requires PWM output to be tristated when system enters suspend. -Following will be DT binding to achieve this: - -#include <dt-bindings/pinctrl/pinctrl-tegra.h> - - pinmux@700008d4 { - pwm_active_state: pwm_active_state { - pe7 { - nvidia,pins = "pe7"; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - }; - - pwm_sleep_state: pwm_sleep_state { - pe7 { - nvidia,pins = "pe7"; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - }; - }; - - pwm@7000a000 { - /* Mandatory PWM properties */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pwm_active_state>; - pinctrl-1 = <&pwm_sleep_state>; - }; diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml new file mode 100644 index 000000000000..739d3155dd32 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/nvidia,tegra20-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra PWFM controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-pwm + - nvidia,tegra186-pwm + + - items: + - enum: + - nvidia,tegra30-pwm + - nvidia,tegra114-pwm + - nvidia,tegra124-pwm + - nvidia,tegra132-pwm + - nvidia,tegra210-pwm + - enum: + - nvidia,tegra20-pwm + + - items: + - const: nvidia,tegra194-pwm + - const: nvidia,tegra186-pwm + + - items: + - const: nvidia,tegra234-pwm + - const: nvidia,tegra194-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + items: + - description: module reset + + reset-names: + items: + - const: pwm + + "#pwm-cells": + const: 2 + + pinctrl-names: + items: + - const: default + - const: sleep + + pinctrl-0: + description: configuration for the default/active state + + pinctrl-1: + description: configuration for the sleep state + + operating-points-v2: + $ref: /schemas/types.yaml#/definitions/phandle + + power-domains: + items: + - description: phandle to the core power domain + +allOf: + - $ref: pwm.yaml + +required: + - compatible + - reg + - clocks + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car TEGRA20_CLK_PWM>; + resets = <&tegra_car 17>; + reset-names = "pwm"; + }; |