diff options
Diffstat (limited to 'Documentation/PCI/endpoint/pci-test-howto.txt')
| -rw-r--r-- | Documentation/PCI/endpoint/pci-test-howto.txt | 179 |
1 files changed, 179 insertions, 0 deletions
diff --git a/Documentation/PCI/endpoint/pci-test-howto.txt b/Documentation/PCI/endpoint/pci-test-howto.txt new file mode 100644 index 000000000000..75f48c3bb191 --- /dev/null +++ b/Documentation/PCI/endpoint/pci-test-howto.txt @@ -0,0 +1,179 @@ + PCI TEST USERGUIDE + Kishon Vijay Abraham I <kishon@ti.com> + +This document is a guide to help users use pci-epf-test function driver +and pci_endpoint_test host driver for testing PCI. The list of steps to +be followed in the host side and EP side is given below. + +1. Endpoint Device + +1.1 Endpoint Controller Devices + +To find the list of endpoint controller devices in the system: + + # ls /sys/class/pci_epc/ + 51000000.pcie_ep + +If PCI_ENDPOINT_CONFIGFS is enabled + # ls /sys/kernel/config/pci_ep/controllers + 51000000.pcie_ep + +1.2 Endpoint Function Drivers + +To find the list of endpoint function drivers in the system: + + # ls /sys/bus/pci-epf/drivers + pci_epf_test + +If PCI_ENDPOINT_CONFIGFS is enabled + # ls /sys/kernel/config/pci_ep/functions + pci_epf_test + +1.3 Creating pci-epf-test Device + +PCI endpoint function device can be created using the configfs. To create +pci-epf-test device, the following commands can be used + + # mount -t configfs none /sys/kernel/config + # cd /sys/kernel/config/pci_ep/ + # mkdir functions/pci_epf_test/func1 + +The "mkdir func1" above creates the pci-epf-test function device that will +be probed by pci_epf_test driver. + +The PCI endpoint framework populates the directory with the following +configurable fields. + + # ls functions/pci_epf_test/func1 + baseclass_code interrupt_pin revid subsys_vendor_id + cache_line_size msi_interrupts subclass_code vendorid + deviceid progif_code subsys_id + +The PCI endpoint function driver populates these entries with default values +when the device is bound to the driver. The pci-epf-test driver populates +vendorid with 0xffff and interrupt_pin with 0x0001 + + # cat functions/pci_epf_test/func1/vendorid + 0xffff + # cat functions/pci_epf_test/func1/interrupt_pin + 0x0001 + +1.4 Configuring pci-epf-test Device + +The user can configure the pci-epf-test device using configfs entry. In order +to change the vendorid and the number of MSI interrupts used by the function +device, the following commands can be used. + + # echo 0x104c > functions/pci_epf_test/func1/vendorid + # echo 0xb500 > functions/pci_epf_test/func1/deviceid + # echo 16 > functions/pci_epf_test/func1/msi_interrupts + +1.5 Binding pci-epf-test Device to EP Controller + +In order for the endpoint function device to be useful, it has to be bound to +a PCI endpoint controller driver. Use the configfs to bind the function +device to one of the controller driver present in the system. + + # ln -s functions/pci_epf_test/func1 controllers/51000000.pcie_ep/ + +Once the above step is completed, the PCI endpoint is ready to establish a link +with the host. + +1.6 Start the Link + +In order for the endpoint device to establish a link with the host, the _start_ +field should be populated with '1'. + + # echo 1 > controllers/51000000.pcie_ep/start + +2. RootComplex Device + +2.1 lspci Output + +Note that the devices listed here correspond to the value populated in 1.4 above + + 00:00.0 PCI bridge: Texas Instruments Device 8888 (rev 01) + 01:00.0 Unassigned class [ff00]: Texas Instruments Device b500 + +2.2 Using Endpoint Test function Device + +pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint +tests. Before pcitest.sh can be used pcitest.c should be compiled using the +following commands. + + cd <kernel-dir> + make headers_install ARCH=arm + arm-linux-gnueabihf-gcc -Iusr/include tools/pci/pcitest.c -o pcitest + cp pcitest <rootfs>/usr/sbin/ + cp tools/pci/pcitest.sh <rootfs> + +2.2.1 pcitest.sh Output + # ./pcitest.sh + BAR tests + + BAR0: OKAY + BAR1: OKAY + BAR2: OKAY + BAR3: OKAY + BAR4: NOT OKAY + BAR5: NOT OKAY + + Interrupt tests + + LEGACY IRQ: NOT OKAY + MSI1: OKAY + MSI2: OKAY + MSI3: OKAY + MSI4: OKAY + MSI5: OKAY + MSI6: OKAY + MSI7: OKAY + MSI8: OKAY + MSI9: OKAY + MSI10: OKAY + MSI11: OKAY + MSI12: OKAY + MSI13: OKAY + MSI14: OKAY + MSI15: OKAY + MSI16: OKAY + MSI17: NOT OKAY + MSI18: NOT OKAY + MSI19: NOT OKAY + MSI20: NOT OKAY + MSI21: NOT OKAY + MSI22: NOT OKAY + MSI23: NOT OKAY + MSI24: NOT OKAY + MSI25: NOT OKAY + MSI26: NOT OKAY + MSI27: NOT OKAY + MSI28: NOT OKAY + MSI29: NOT OKAY + MSI30: NOT OKAY + MSI31: NOT OKAY + MSI32: NOT OKAY + + Read Tests + + READ ( 1 bytes): OKAY + READ ( 1024 bytes): OKAY + READ ( 1025 bytes): OKAY + READ (1024000 bytes): OKAY + READ (1024001 bytes): OKAY + + Write Tests + + WRITE ( 1 bytes): OKAY + WRITE ( 1024 bytes): OKAY + WRITE ( 1025 bytes): OKAY + WRITE (1024000 bytes): OKAY + WRITE (1024001 bytes): OKAY + + Copy Tests + + COPY ( 1 bytes): OKAY + COPY ( 1024 bytes): OKAY + COPY ( 1025 bytes): OKAY + COPY (1024000 bytes): OKAY + COPY (1024001 bytes): OKAY |