diff options
| -rw-r--r-- | Documentation/admin-guide/kdump/gdbmacros.txt | 159 | ||||
| -rw-r--r-- | Documentation/admin-guide/kdump/vmcoreinfo.rst | 131 | ||||
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | drivers/base/core.c | 46 | ||||
| -rw-r--r-- | include/linux/crash_core.h | 3 | ||||
| -rw-r--r-- | include/linux/debug_locks.h | 2 | ||||
| -rw-r--r-- | include/linux/dev_printk.h | 8 | ||||
| -rw-r--r-- | include/linux/kernel.h | 1 | ||||
| -rw-r--r-- | include/linux/printk.h | 8 | ||||
| -rw-r--r-- | init/Kconfig | 3 | ||||
| -rw-r--r-- | kernel/printk/Makefile | 1 | ||||
| -rw-r--r-- | kernel/printk/internal.h | 4 | ||||
| -rw-r--r-- | kernel/printk/printk.c | 1153 | ||||
| -rw-r--r-- | kernel/printk/printk_ringbuffer.c | 2083 | ||||
| -rw-r--r-- | kernel/printk/printk_ringbuffer.h | 382 | ||||
| -rw-r--r-- | kernel/printk/printk_safe.c | 2 | ||||
| -rw-r--r-- | scripts/gdb/linux/dmesg.py | 147 | ||||
| -rw-r--r-- | scripts/gdb/linux/utils.py | 7 |
18 files changed, 3410 insertions, 731 deletions
diff --git a/Documentation/admin-guide/kdump/gdbmacros.txt b/Documentation/admin-guide/kdump/gdbmacros.txt index 220d0a80ca2c..82aecdcae8a6 100644 --- a/Documentation/admin-guide/kdump/gdbmacros.txt +++ b/Documentation/admin-guide/kdump/gdbmacros.txt @@ -170,57 +170,103 @@ document trapinfo address the kernel panicked. end -define dump_log_idx - set $idx = $arg0 - if ($argc > 1) - set $prev_flags = $arg1 +define dump_record + set var $desc = $arg0 + set var $info = $arg1 + if ($argc > 2) + set var $prev_flags = $arg2 else - set $prev_flags = 0 + set var $prev_flags = 0 end - set $msg = ((struct printk_log *) (log_buf + $idx)) - set $prefix = 1 - set $newline = 1 - set $log = log_buf + $idx + sizeof(*$msg) - - # prev & LOG_CONT && !(msg->flags & LOG_PREIX) - if (($prev_flags & 8) && !($msg->flags & 4)) - set $prefix = 0 + + set var $prefix = 1 + set var $newline = 1 + + set var $begin = $desc->text_blk_lpos.begin % (1U << prb->text_data_ring.size_bits) + set var $next = $desc->text_blk_lpos.next % (1U << prb->text_data_ring.size_bits) + + # handle data-less record + if ($begin & 1) + set var $text_len = 0 + set var $log = "" + else + # handle wrapping data block + if ($begin > $next) + set var $begin = 0 + end + + # skip over descriptor id + set var $begin = $begin + sizeof(long) + + # handle truncated message + if ($next - $begin < $info->text_len) + set var $text_len = $next - $begin + else + set var $text_len = $info->text_len + end + + set var $log = &prb->text_data_ring.data[$begin] + end + + # prev & LOG_CONT && !(info->flags & LOG_PREIX) + if (($prev_flags & 8) && !($info->flags & 4)) + set var $prefix = 0 end - # msg->flags & LOG_CONT - if ($msg->flags & 8) + # info->flags & LOG_CONT + if ($info->flags & 8) # (prev & LOG_CONT && !(prev & LOG_NEWLINE)) if (($prev_flags & 8) && !($prev_flags & 2)) - set $prefix = 0 + set var $prefix = 0 end - # (!(msg->flags & LOG_NEWLINE)) - if (!($msg->flags & 2)) - set $newline = 0 + # (!(info->flags & LOG_NEWLINE)) + if (!($info->flags & 2)) + set var $newline = 0 end end if ($prefix) - printf "[%5lu.%06lu] ", $msg->ts_nsec / 1000000000, $msg->ts_nsec % 1000000000 + printf "[%5lu.%06lu] ", $info->ts_nsec / 1000000000, $info->ts_nsec % 1000000000 end - if ($msg->text_len != 0) - eval "printf \"%%%d.%ds\", $log", $msg->text_len, $msg->text_len + if ($text_len) + eval "printf \"%%%d.%ds\", $log", $text_len, $text_len end if ($newline) printf "\n" end - if ($msg->dict_len > 0) - set $dict = $log + $msg->text_len - set $idx = 0 - set $line = 1 - while ($idx < $msg->dict_len) - if ($line) - printf " " - set $line = 0 + + # handle dictionary data + + set var $dict = &$info->dev_info.subsystem[0] + set var $dict_len = sizeof($info->dev_info.subsystem) + if ($dict[0] != '\0') + printf " SUBSYSTEM=" + set var $idx = 0 + while ($idx < $dict_len) + set var $c = $dict[$idx] + if ($c == '\0') + loop_break + else + if ($c < ' ' || $c >= 127 || $c == '\\') + printf "\\x%02x", $c + else + printf "%c", $c + end end - set $c = $dict[$idx] + set var $idx = $idx + 1 + end + printf "\n" + end + + set var $dict = &$info->dev_info.device[0] + set var $dict_len = sizeof($info->dev_info.device) + if ($dict[0] != '\0') + printf " DEVICE=" + set var $idx = 0 + while ($idx < $dict_len) + set var $c = $dict[$idx] if ($c == '\0') - printf "\n" - set $line = 1 + loop_break else if ($c < ' ' || $c >= 127 || $c == '\\') printf "\\x%02x", $c @@ -228,33 +274,46 @@ define dump_log_idx printf "%c", $c end end - set $idx = $idx + 1 + set var $idx = $idx + 1 end printf "\n" end end -document dump_log_idx - Dump a single log given its index in the log buffer. The first - parameter is the index into log_buf, the second is optional and - specified the previous log buffer's flags, used for properly - formatting continued lines. +document dump_record + Dump a single record. The first parameter is the descriptor, + the second parameter is the info, the third parameter is + optional and specifies the previous record's flags, used for + properly formatting continued lines. end define dmesg - set $i = log_first_idx - set $end_idx = log_first_idx - set $prev_flags = 0 + # definitions from kernel/printk/printk_ringbuffer.h + set var $desc_committed = 1 + set var $desc_finalized = 2 + set var $desc_sv_bits = sizeof(long) * 8 + set var $desc_flags_shift = $desc_sv_bits - 2 + set var $desc_flags_mask = 3 << $desc_flags_shift + set var $id_mask = ~$desc_flags_mask + + set var $desc_count = 1U << prb->desc_ring.count_bits + set var $prev_flags = 0 + + set var $id = prb->desc_ring.tail_id.counter + set var $end_id = prb->desc_ring.head_id.counter while (1) - set $msg = ((struct printk_log *) (log_buf + $i)) - if ($msg->len == 0) - set $i = 0 - else - dump_log_idx $i $prev_flags - set $i = $i + $msg->len - set $prev_flags = $msg->flags + set var $desc = &prb->desc_ring.descs[$id % $desc_count] + set var $info = &prb->desc_ring.infos[$id % $desc_count] + + # skip non-committed record + set var $state = 3 & ($desc->state_var.counter >> $desc_flags_shift) + if ($state == $desc_committed || $state == $desc_finalized) + dump_record $desc $info $prev_flags + set var $prev_flags = $info->flags end - if ($i == $end_idx) + + set var $id = ($id + 1) & $id_mask + if ($id == $end_id) loop_break end end diff --git a/Documentation/admin-guide/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst index 2baad0bfb09d..e44a6c01f336 100644 --- a/Documentation/admin-guide/kdump/vmcoreinfo.rst +++ b/Documentation/admin-guide/kdump/vmcoreinfo.rst @@ -189,50 +189,123 @@ from this. Free areas descriptor. User-space tools use this value to iterate the free_area ranges. MAX_ORDER is used by the zone buddy allocator. -log_first_idx +prb +--- + +A pointer to the printk ringbuffer (struct printk_ringbuffer). This +may be pointing to the static boot ringbuffer or the dynamically +allocated ringbuffer, depending on when the the core dump occurred. +Used by user-space tools to read the active kernel log buffer. + +printk_rb_static +---------------- + +A pointer to the static boot printk ringbuffer. If @prb has a +different value, this is useful for viewing the initial boot messages, +which may have been overwritten in the dynamically allocated +ringbuffer. + +clear_seq +--------- + +The sequence number of the printk() record after the last clear +command. It indicates the first record after the last +SYSLOG_ACTION_CLEAR, like issued by 'dmesg -c'. Used by user-space +tools to dump a subset of the dmesg log. + +printk_ringbuffer +----------------- + +The size of a printk_ringbuffer structure. This structure contains all +information required for accessing the various components of the +kernel log buffer. + +(printk_ringbuffer, desc_ring|text_data_ring|dict_data_ring|fail) +----------------------------------------------------------------- + +Offsets for the various components of the printk ringbuffer. Used by +user-space tools to view the kernel log buffer without requiring the +declaration of the structure. + +prb_desc_ring ------------- -Index of the first record stored in the buffer log_buf. Used by -user-space tools to read the strings in the log_buf. +The size of the prb_desc_ring structure. This structure contains +information about the set of record descriptors. -log_buf -------- +(prb_desc_ring, count_bits|descs|head_id|tail_id) +------------------------------------------------- + +Offsets for the fields describing the set of record descriptors. Used +by user-space tools to be able to traverse the descriptors without +requiring the declaration of the structure. + +prb_desc +-------- + +The size of the prb_desc structure. This structure contains +information about a single record descriptor. + +(prb_desc, info|state_var|text_blk_lpos|dict_blk_lpos) +------------------------------------------------------ + +Offsets for the fields describing a record descriptors. Used by +user-space tools to be able to read descriptors without requiring +the declaration of the structure. + +prb_data_blk_lpos +----------------- + +The size of the prb_data_blk_lpos structure. This structure contains +information about where the text or dictionary data (data block) is +located within the respective data ring. + +(prb_data_blk_lpos, begin|next) +------------------------------- -Console output is written to the ring buffer log_buf at index -log_first_idx. Used to get the kernel log. +Offsets for the fields describing the location of a data block. Used +by user-space tools to be able to locate data blocks without +requiring the declaration of the structure. -log_buf_len +printk_info ----------- -log_buf's length. +The size of the printk_info structure. This structure contains all +the meta-data for a record. -clear_idx ---------- +(printk_info, seq|ts_nsec|text_len|dict_len|caller_id) +------------------------------------------------------ -The index that the next printk() record to read after the last clear -command. It indicates the first record after the last SYSLOG_ACTION -_CLEAR, like issued by 'dmesg -c'. Used by user-space tools to dump -the dmesg log. +Offsets for the fields providing the meta-data for a record. Used by +user-space tools to be able to read the information without requiring +the declaration of the structure. -log_next_idx ------------- +prb_data_ring +------------- -The index of the next record to store in the buffer log_buf. Used to -compute the index of the current buffer position. +The size of the prb_data_ring structure. This structure contains +information about a set of data blocks. -printk_log ----------- +(prb_data_ring, size_bits|data|head_lpos|tail_lpos) +--------------------------------------------------- -The size of a structure printk_log. Used to compute the size of -messages, and extract dmesg log. It encapsulates header information for -log_buf, such as timestamp, syslog level, etc. +Offsets for the fields describing a set of data blocks. Used by +user-space tools to be able to access the data blocks without +requiring the declaration of the structure. -(printk_log, ts_nsec|len|text_len|dict_len) -------------------------------------------- +atomic_long_t +------------- + +The size of the atomic_long_t structure. Used by user-space tools to +be able to copy the full structure, regardless of its +architecture-specific implementation. + +(atomic_long_t, counter) +------------------------ -It represents field offsets in struct printk_log. User space tools -parse it and check whether the values of printk_log's members have been -changed. +Offset for the long value of an atomic_long_t variable. Used by +user-space tools to access the long value without requiring the +architecture-specific declaration. (free_area.free_list, MIGRATE_TYPES) ------------------------------------ diff --git a/MAINTAINERS b/MAINTAINERS index 71291bb26a07..6da16c3707c6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13970,6 +13970,7 @@ PRINTK M: Petr Mladek <pmladek@suse.com> M: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> R: Steven Rostedt <rostedt@goodmis.org> +R: John Ogness <john.ogness@linutronix.de> S: Maintained F: include/linux/printk.h F: kernel/printk/ diff --git a/drivers/base/core.c b/drivers/base/core.c index bb5806a2bd4c..f90e9f77bf8c 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -4061,22 +4061,21 @@ void device_shutdown(void) */ #ifdef CONFIG_PRINTK -static int -create_syslog_header(const struct device *dev, char *hdr, size_t hdrlen) +static void +set_dev_info(const struct device *dev, struct dev_printk_info *dev_info) { const char *subsys; - size_t pos = 0; + + memset(dev_info, 0, sizeof(*dev_info)); if (dev->class) subsys = dev->class->name; else if (dev->bus) subsys = dev->bus->name; else - return 0; + return; - pos += snprintf(hdr + pos, hdrlen - pos, "SUBSYSTEM=%s", subsys); - if (pos >= hdrlen) - goto overflow; + strscpy(dev_info->subsystem, subsys, sizeof(dev_info->subsystem)); /* * Add device identifier DEVICE=: @@ -4092,41 +4091,28 @@ create_syslog_header(const struct device *dev, char *hdr, size_t hdrlen) c = 'b'; else c = 'c'; - pos++; - pos += snprintf(hdr + pos, hdrlen - pos, - "DEVICE=%c%u:%u", - c, MAJOR(dev->devt), MINOR(dev->devt)); + + snprintf(dev_info->device, sizeof(dev_info->device), + "%c%u:%u", c, MAJOR(dev->devt), MINOR(dev->devt)); } else if (strcmp(subsys, "net") == 0) { struct net_device *net = to_net_dev(dev); - pos++; - pos += snprintf(hdr + pos, hdrlen - pos, - "DEVICE=n%u", net->ifindex); + snprintf(dev_info->device, sizeof(dev_info->device), + "n%u", net->ifindex); } else { - pos++; - pos += snprintf(hdr + pos, hdrlen - pos, - "DEVICE=+%s:%s", subsys, dev_name(dev)); + snprintf(dev_info->device, sizeof(dev_info->device), + "+%s:%s", subsys, dev_name(dev)); } - - if (pos >= hdrlen) - goto overflow; - - return pos; - -overflow: - dev_WARN(dev, "device/subsystem name too long"); - return 0; } int dev_vprintk_emit(int level, const struct device *dev, const char *fmt, va_list args) { - char hdr[128]; - size_t hdrlen; + struct dev_printk_info dev_info; - hdrlen = create_syslog_header(dev, hdr, sizeof(hdr)); + set_dev_info(dev, &dev_info); - return vprintk_emit(0, level, hdrlen ? hdr : NULL, hdrlen, fmt, args); + return vprintk_emit(0, level, &dev_info, fmt, args); } EXPORT_SYMBOL(dev_vprintk_emit); diff --git a/include/linux/crash_core.h b/include/linux/crash_core.h index 6594dbc34a37..206bde8308b2 100644 --- a/include/linux/crash_core.h +++ b/include/linux/crash_core.h @@ -55,6 +55,9 @@ phys_addr_t paddr_vmcoreinfo_note(void); #define VMCOREINFO_OFFSET(name, field) \ vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \ (unsigned long)offsetof(struct name, field)) +#define VMCOREINFO_TYPE_OFFSET(name, field) \ + vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \ + (unsigned long)offsetof(name, field)) #define VMCOREINFO_LENGTH(name, value) \ vmcoreinfo_append_str("LENGTH(%s)=%lu\n", #name, (unsigned long)value) #define VMCOREINFO_NUMBER(name) \ diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index e7e45f0cc7da..2915f56ad421 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -2,9 +2,9 @@ #ifndef __LINUX_DEBUG_LOCKING_H #define __LINUX_DEBUG_LOCKING_H -#include <linux/kernel.h> #include <linux/atomic.h> #include <linux/bug.h> +#include <linux/printk.h> struct task_struct; diff --git a/include/linux/dev_printk.h b/include/linux/dev_printk.h index 3028b644b4fb..6f009559ee54 100644 --- a/include/linux/dev_printk.h +++ b/include/linux/dev_printk.h @@ -21,6 +21,14 @@ struct device; +#define PRINTK_INFO_SUBSYSTEM_LEN 16 +#define PRINTK_INFO_DEVICE_LEN 48 + +struct dev_printk_info { + char subsystem[PRINTK_INFO_SUBSYSTEM_LEN]; + char device[PRINTK_INFO_DEVICE_LEN]; +}; + #ifdef CONFIG_PRINTK __printf(3, 0) __cold diff --git a/include/linux/kernel.h b/include/linux/kernel.h index c25b8e41c0ea..e4aa29b1ad62 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -526,7 +526,6 @@ extern unsigned int sysctl_oops_all_cpu_backtrace; #endif /* CONFIG_SMP */ extern void bust_spinlocks(int yes); -extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */ extern int panic_timeout; extern unsigned long panic_print; extern int panic_on_oops; diff --git a/include/linux/printk.h b/include/linux/printk.h index 34c1a7be3e01..78479633ccfc 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -12,6 +12,8 @@ extern const char linux_banner[]; extern const char linux_proc_banner[]; +extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */ + #define PRINTK_MAX_SINGLE_HEADER_LEN 2 static inline int printk_get_level(const char *buffer) @@ -159,10 +161,12 @@ static inline void printk_nmi_direct_enter(void) { } static inline void printk_nmi_direct_exit(void) { } #endif /* PRINTK_NMI */ +struct dev_printk_info; + #ifdef CONFIG_PRINTK -asmlinkage __printf(5, 0) +asmlinkage __printf(4, 0) int vprintk_emit(int facility, int level, - const char *dict, size_t dictlen, + const struct dev_printk_info *dev_info, const char *fmt, va_list args); asmlinkage __printf(1, 0) diff --git a/init/Kconfig b/init/Kconfig index c0f56e455dce..2a583ef2ff66 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -682,7 +682,8 @@ config IKHEADERS config LOG_BUF_SHIFT int "Kernel log buffer size (16 => 64KB, 17 => 128KB)" - range 12 25 + range 12 25 if !H8300 + range 12 19 if H8300 default 17 depends on PRINTK help diff --git a/kernel/printk/Makefile b/kernel/printk/Makefile index 4d052fc6bcde..eee3dc9b60a9 100644 --- a/kernel/printk/Makefile +++ b/kernel/printk/Makefile @@ -2,3 +2,4 @@ obj-y = printk.o obj-$(CONFIG_PRINTK) += printk_safe.o obj-$(CONFIG_A11Y_BRAILLE_CONSOLE) += braille.o +obj-$(CONFIG_PRINTK) += printk_ringbuffer.o diff --git a/kernel/printk/internal.h b/kernel/printk/internal.h index 660f9a6bf73a..3a8fd491758c 100644 --- a/kernel/printk/internal.h +++ b/kernel/printk/internal.h @@ -14,9 +14,9 @@ extern raw_spinlock_t logbuf_lock; -__printf(5, 0) +__printf(4, 0) int vprintk_store(int facility, int level, - const char *dict, size_t dictlen, + const struct dev_printk_info *dev_info, const char *fmt, va_list args); __printf(1, 0) int vprintk_default(const char *fmt, va_list args); diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 9b75f6bfc333..fe64a49344bf 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -55,6 +55,7 @@ #define CREATE_TRACE_POINTS #include <trace/events/printk.h> +#include "printk_ringbuffer.h" #include "console_cmdline.h" #include "braille.h" #include "internal.h" @@ -294,30 +295,22 @@ enum con_msg_format_flags { static int console_msg_format = MSG_FORMAT_DEFAULT; /* - * The printk log buffer consists of a chain of concatenated variable - * length records. Every record starts with a record header, containing - * the overall length of the record. + * The printk log buffer consists of a sequenced collection of records, each + * containing variable length message text. Every record also contains its + * own meta-data (@info). * - * The heads to the first and last entry in the buffer, as well as the - * sequence numbers of these entries are maintained when messages are - * stored. + * Every record meta-data carries the timestamp in microseconds, as well as + * the standard userspace syslog level and syslog facility. The usual kernel + * messages use LOG_KERN; userspace-injected messages always carry a matching + * syslog facility, by default LOG_USER. The origin of every message can be + * reliably determined that way. * - * If the heads indicate available messages, the length in the header - * tells the start next message. A length == 0 for the next message - * indicates a wrap-around to the beginning of the buffer. + * The human readable log message of a record is available in @text, the + * length of the message text in @text_len. The stored message is not + * terminated. * - * Every record carries the monotonic timestamp in microseconds, as well as - * the standard userspace syslog level and syslog facility. The usual - * kernel messages use LOG_KERN; userspace-injected messages always carry - * a matching syslog facility, by default LOG_USER. The origin of every - * message can be reliably determined that way. - * - * The human readable log message directly follows the message header. The - * length of the message text is stored in the header, the stored message - * is not terminated. - * - * Optionally, a message can carry a dictionary of properties (key/value pairs), - * to provide userspace with a machine-readable message context. + * Optionally, a record can carry a dictionary of properties (key/value + * pairs), to provide userspace with a machine-readable message context. * * Examples for well-defined, commonly used property names are: * DEVICE=b12:8 device identifier @@ -327,25 +320,22 @@ static int console_msg_format = MSG_FORMAT_DEFAULT; * +sound:card0 subsystem:devname * SUBSYSTEM=pci driver-core subsystem name * - * Valid characters in property names are [a-zA-Z0-9.-_]. The plain text value - * follows directly after a '=' character. Every property is terminated by - * a '\0' character. The last property is not terminated. - * - * Example of a message structure: - * 0000 ff 8f 00 00 00 00 00 00 monotonic time in nsec - * 0008 34 00 record is 52 bytes long - * 000a 0b 00 text is 11 bytes long - * 000c 1f 00 dictionary is 23 bytes long - * 000e 03 00 LOG_KERN (facility) LOG_ERR (level) - * 0010 69 74 27 73 20 61 20 6c "it's a l" - * 69 6e 65 "ine" - * 001b 44 45 56 49 43 "DEVIC" - * 45 3d 62 38 3a 32 00 44 "E=b8:2\0D" - * 52 49 56 45 52 3d 62 75 "RIVER=bu" - * 67 "g" - * 0032 00 00 00 padding to next message header - * - * The 'struct printk_log' buffer header must never be directly exported to + * Valid characters in property names are [a-zA-Z0-9.-_]. Property names + * and values are terminated by a '\0' character. + * + * Example of record values: + * record.text_buf = "it's a line" (unterminated) + * record.info.seq = 56 + * record.info.ts_nsec = 36863 + * record.info.text_len = 11 + * record.info.facility = 0 (LOG_KERN) + * record.info.flags = 0 + * record.info.level = 3 (LOG_ERR) + * record.info.caller_id = 299 (task 299) + * record.info.dev_info.subsystem = "pci" (terminated) + * record.info.dev_info.device = "+pci:0000:00:01.0" (terminated) + * + * The 'struct printk_info' buffer must never be directly exported to * userspace, it is a kernel-private implementation detail that might * need to be changed in the future, when the requirements change. * @@ -365,23 +355,6 @@ enum log_flags { LOG_CONT = 8, /* text is a fragment of a continuation line */ }; -struct printk_log { - u64 ts_nsec; /* timestamp in nanoseconds */ - u16 len; /* length of entire record */ - u16 text_len; /* length of text buffer */ - u16 dict_len; /* length of dictionary buffer */ - u8 facility; /* syslog facility */ - u8 flags:5; /* internal record flags */ - u8 level:3; /* syslog level */ -#ifdef CONFIG_PRINTK_CALLER - u32 caller_id; /* thread id or processor id */ -#endif -} -#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS -__packed __aligned(4) -#endif -; - /* * The logbuf_lock protects kmsg buffer, indices, counters. This can be taken * within the scheduler's rq lock. It must be released before calling @@ -421,26 +394,16 @@ DEFINE_RAW_SPINLOCK(logbuf_lock); DECLARE_WAIT_QUEUE_HEAD(log_wait); /* the next printk record to read by syslog(READ) or /proc/kmsg */ static u64 syslog_seq; -static u32 syslog_idx; static size_t syslog_partial; static bool syslog_time; -/* index and sequence number of the first record stored in the buffer */ -static u64 log_first_seq; -static u32 log_first_idx; - -/* index and sequence number of the next record to store in the buffer */ -static u64 log_next_seq; -static u32 log_next_idx; - /* the next printk record to write to the console */ static u64 console_seq; -static u32 console_idx; static u64 exclusive_console_stop_seq; +static unsigned long console_dropped; /* the next printk record to read after the last 'clear' command */ static u64 clear_seq; -static u32 clear_idx; #ifdef CONFIG_PRINTK_CALLER #define PREFIX_MAX 48 @@ -453,7 +416,7 @@ static u32 clear_idx; #define LOG_FACILITY(v) ((v) >> 3 & 0xff) /* record buffer */ -#define LOG_ALIGN __alignof__(struct printk_log) +#define LOG_ALIGN __alignof__(unsigned long) #define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT) #define LOG_BUF_LEN_MAX (u32)(1 << 31) static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN); @@ -461,6 +424,23 @@ static char *log_buf = __log_buf; static u32 log_buf_len = __LOG_BUF_LEN; /* + * Define the average message size. This only affects the number of + * descriptors that will be available. Underestimating is better than + * overestimating (too many available descriptors is better than not enough). + */ +#define PRB_AVGBITS 5 /* 32 character average length */ + +#if CONFIG_LOG_BUF_SHIFT <= PRB_AVGBITS +#error CONFIG_LOG_BUF_SHIFT value too small. +#endif +_DEFINE_PRINTKRB(printk_rb_static, CONFIG_LOG_BUF_SHIFT - PRB_AVGBITS, + PRB_AVGBITS, &__log_buf[0]); + +static struct printk_ringbuffer printk_rb_dynamic; + +static struct printk_ringbuffer *prb = &printk_rb_static; + +/* * We cannot access per-CPU data (e.g. per-CPU flush irq_work) before * per_cpu_areas are initialised. This variable is set to true when * it's safe to access per-CPU data. @@ -484,108 +464,6 @@ u32 log_buf_len_get(void) return log_buf_len; } -/* human readable text of the record */ -static char *log_text(const struct printk_log *msg) -{ - return (char *)msg + sizeof(struct printk_log); -} - -/* optional key/value pair dictionary attached to the record */ -static char *log_dict(const struct printk_log *msg) -{ - return (char *)msg + sizeof(struct printk_log) + msg->text_len; -} - -/* get record by index; idx must point to valid msg */ -static struct printk_log *log_from_idx(u32 idx) -{ - struct printk_log *msg = (struct printk_log *)(log_buf + idx); - - /* - * A length == 0 record is the end of buffer marker. Wrap around and - * read the message at the start of the buffer. - */ - if (!msg->len) - return (struct printk_log *)log_buf; - return msg; -} - -/* get next record; idx must point to valid msg */ -static u32 log_next(u32 idx) -{ - struct printk_log *msg = (struct printk_log *)(log_buf + idx); - - /* length == 0 indicates the end of the buffer; wrap */ - /* - * A length == 0 record is the end of buffer marker. Wrap around and - * read the message at the start of the buffer as *this* one, and - * return the one after that. - */ - if (!msg->len) { - msg = (struct printk_log *)log_buf; - return msg->len; - } - return idx + msg->len; -} - -/* - * Check whether there is enough free space for the given message. - * - * The same values of first_idx and next_idx mean that the buffer - * is either empty or full. - * - * If the buffer is empty, we must respect the position of the indexes. - * They cannot be reset to the beginning of the buffer. - */ -static int logbuf_has_space(u32 msg_size, bool empty) -{ - u32 free; - - if (log_next_idx > log_first_idx || empty) - free = max(log_buf_len - log_next_idx, log_first_idx); - else - free = log_first_idx - log_next_idx; - - /* - * We need space also for an empty header that signalizes wrapping - * of the buffer. - */ - return free >= msg_size + sizeof(struct printk_log); -} - -static int log_make_free_space(u32 msg_size) -{ - while (log_first_seq < log_next_seq && - !logbuf_has_space(msg_size, false)) { - /* drop old messages until we have enough contiguous space */ - log_first_idx = log_next(log_first_idx); - log_first_seq++; - } - - if (clear_seq < log_first_seq) { - clear_seq = log_first_seq; - clear_idx = log_first_idx; - } - - /* sequence numbers are equal, so the log buffer is empty */ - if (logbuf_has_space(msg_size, log_first_seq == log_next_seq)) - return 0; - - return -ENOMEM; -} - -/* compute the message size including the padding bytes */ -static u32 msg_used_size(u16 text_len, u16 dict_len, u32 *pad_len) -{ - u32 size; - - size = sizeof(struct printk_log) + text_len + dict_len; - *pad_len = (-size) & (LOG_ALIGN - 1); - size += *pad_len; - - return size; -} - /* * Define how much of the log buffer we could take at maximum. The value * must be greater than two. Note that only half of the buffer is available @@ -594,84 +472,69 @@ static u32 msg_used_size(u16 text_len, u16 dict_len, u32 *pad_len) #define MAX_LOG_TAKE_PART 4 static const char trunc_msg[] = "<truncated>"; -static u32 truncate_msg(u16 *text_len, u16 *trunc_msg_len, - u16 *dict_len, u32 *pad_len) +static void truncate_msg(u16 *text_len, u16 *trunc_msg_len) { /* * The message should not take the whole buffer. Otherwise, it might * get removed too soon. */ u32 max_text_len = log_buf_len / MAX_LOG_TAKE_PART; + if (*text_len > max_text_len) *text_len = max_text_len; - /* enable the warning message */ + + /* enable the warning message (if there is room) */ *trunc_msg_len = strlen(trunc_msg); - /* disable the "dict" completely */ - *dict_len = 0; - /* compute the size again, count also the warning message */ - return msg_used_size(*text_len + *trunc_msg_len, 0, pad_len); + if (*text_len >= *trunc_msg_len) + *text_len -= *trunc_msg_len; + else + *trunc_msg_len = 0; } /* insert record into the buffer, discard old ones, update heads */ static int log_store(u32 caller_id, int facility, int level, enum log_flags flags, u64 ts_nsec, - const char *dict, u16 dict_len, + const struct dev_printk_info *dev_info, const char *text, u16 text_len) { - struct printk_log *msg; - u32 size, pad_len; + struct prb_reserved_entry e; + struct printk_record r; u16 trunc_msg_len = 0; - /* number of '\0' padding bytes to next message */ - size = msg_used_size(text_len, dict_len, &pad_len); + prb_rec_init_wr(&r, text_len); - if (log_make_free_space(size)) { + if (!prb_reserve(&e, prb, &r)) { /* truncate the message if it is too long for empty buffer */ - size = truncate_msg(&text_len, &trunc_msg_len, - &dict_len, &pad_len); + truncate_msg(&text_len, &trunc_msg_len); + prb_rec_init_wr(&r, text_len + trunc_msg_len); /* survive when the log buffer is too small for trunc_msg */ - if (log_make_free_space(size)) + if (!prb_reserve(&e, prb, &r)) return 0; } - if (log_next_idx + size + sizeof(struct printk_log) > log_buf_len) { - /* - * This message + an additional empty header does not fit - * at the end of the buffer. Add an empty header with len == 0 - * to signify a wrap around. - */ - memset(log_buf + log_next_idx, 0, sizeof(struct printk_log)); - log_next_idx = 0; - } - /* fill message */ - msg = (struct printk_log *)(log_buf + log_next_idx); - memcpy(log_text(msg), text, text_len); - msg->text_len = text_len; - if (trunc_msg_len) { - memcpy(log_text(msg) + text_len, trunc_msg, trunc_msg_len); - msg->text_len += trunc_msg_len; - } - memcpy(log_dict(msg), dict, dict_len); - msg->dict_len = dict_len; - msg->facility = facility; - msg->level = level & 7; - msg->flags = flags & 0x1f; + memcpy(&r.text_buf[0], text, text_len); + if (trunc_msg_len) + memcpy(&r.text_buf[text_len], trunc_msg, trunc_msg_len); + r.info->text_len = text_len + trunc_msg_len; + r.info->facility = facility; + r.info->level = level & 7; + r.info->flags = flags & 0x1f; if (ts_nsec > 0) - msg->ts_nsec = ts_nsec; + r.info->ts_nsec = ts_nsec; else - msg->ts_nsec = local_clock(); -#ifdef CONFIG_PRINTK_CALLER - msg->caller_id = caller_id; -#endif - memset(log_dict(msg) + dict_len, 0, pad_len); - msg->len = size; + r.info->ts_nsec = local_clock(); + r.info->caller_id = caller_id; + if (dev_info) + memcpy(&r.info->dev_info, dev_info, sizeof(r.info->dev_info)); /* insert message */ - log_next_idx += msg->len; - log_next_seq++; + if ((flags & LOG_CONT) || !(flags & LOG_NEWLINE)) + prb_commit(&e); + else + prb_final_commit(&e); - return msg->text_len; + return (text_len + trunc_msg_len); } int dmesg_restrict = IS_ENABLED(CONFIG_SECURITY_DMESG_RESTRICT); @@ -723,13 +586,13 @@ static void append_char(char **pp, char *e, char c) *(*pp)++ = c; } -static ssize_t msg_print_ext_header(char *buf, size_t size, - struct printk_log *msg, u64 seq) +static ssize_t info_print_ext_header(char *buf, size_t size, + struct printk_info *info) { - u64 ts_usec = msg->ts_nsec; + u64 ts_usec = info->ts_nsec; char caller[20]; #ifdef CONFIG_PRINTK_CALLER - u32 id = msg->caller_id; + u32 id = info->caller_id; snprintf(caller, sizeof(caller), ",caller=%c%u", id & 0x80000000 ? 'C' : 'T', id & ~0x80000000); @@ -740,13 +603,13 @@ static ssize_t msg_print_ext_header(char *buf, size_t size, do_div(ts_usec, 1000); return scnprintf(buf, size, "%u,%llu,%llu,%c%s;", - (msg->facility << 3) | msg->level, seq, ts_usec, - msg->flags & LOG_CONT ? 'c' : '-', caller); + (info->facility << 3) | info->level, info->seq, + ts_usec, info->flags & LOG_CONT ? 'c' : '-', caller); } -static ssize_t msg_print_ext_body(char *buf, size_t size, - char *dict, size_t dict_len, - char *text, size_t text_len) +static ssize_t msg_add_ext_text(char *buf, size_t size, + const char *text, size_t text_len, + unsigned char endc) { char *p = buf, *e = buf + size; size_t i; @@ -760,45 +623,56 @@ static ssize_t msg_print_ext_body(char *buf, size_t size, else append_char(&p, e, c); } - append_char(&p, e, '\n'); + append_char(&p, e, endc); - if (dict_len) { - bool line = true; + return p - buf; +} - for (i = 0; i < dict_len; i++) { - unsigned char c = dict[i]; +static ssize_t msg_add_dict_text(char *buf, size_t size, + const char *key, const char *val) +{ + size_t val_len = strlen(val); + ssize_t len; - if (line) { - append_char(&p, e, ' '); - line = false; - } + if (!val_len) + return 0; - if (c == '\0') { - append_char(&p, e, '\n'); - line = true; - continue; - } + len = msg_add_ext_text(buf, size, "", 0, ' '); /* dict prefix */ + len += msg_add_ext_text(buf + len, size - len, key, strlen(key), '='); + len += msg_add_ext_text(buf + len, size - len, val, val_len, '\n'); - if (c < ' ' || c >= 127 || c == '\\') { - p += scnprintf(p, e - p, "\\x%02x", c); - continue; - } + return len; +} - append_char(&p, e, c); - } - append_char(&p, e, '\n'); - } +static ssize_t msg_print_ext_body(char *buf, size_t size, + char *text, size_t text_len, + struct dev_printk_info *dev_info) +{ + ssize_t len; - return p - buf; + len = msg_add_ext_text(buf, size, text, text_len, '\n'); + + if (!dev_info) + goto out; + + len += msg_add_dict_text(buf + len, size - len, "SUBSYSTEM", + dev_info->subsystem); + len += msg_add_dict_text(buf + len, size - len, "DEVICE", + dev_info->device); +out: + return len; } /* /dev/kmsg - userspace message inject/listen interface */ struct devkmsg_user { u64 seq; - u32 idx; struct ratelimit_state rs; struct mutex lock; char buf[CONSOLE_EXT_LOG_MAX]; + + struct printk_info info; + char text_buf[CONSOLE_EXT_LOG_MAX]; + struct printk_record record; }; static __printf(3, 4) __cold @@ -808,7 +682,7 @@ int devkmsg_emit(int facility, int level, const char *fmt, ...) int r; va_start(args, fmt); - r = vprintk_emit(facility, level, NULL, 0, fmt, args); + r = vprintk_emit(facility, level, NULL, fmt, args); va_end(args); return r; @@ -881,7 +755,7 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct devkmsg_user *user = file->private_data; - struct printk_log *msg; + struct printk_record *r = &user->record; size_t len; ssize_t ret; @@ -893,7 +767,7 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf, return ret; logbuf_lock_irq(); - while (user->seq == log_next_seq) { + if (!prb_read_valid(prb, user->seq, r)) { if (file->f_flags & O_NONBLOCK) { ret = -EAGAIN; logbuf_unlock_irq(); @@ -902,30 +776,26 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf, logbuf_unlock_irq(); ret = wait_event_interruptible(log_wait, - user->seq != log_next_seq); + prb_read_valid(prb, user->seq, r)); if (ret) goto out; logbuf_lock_irq(); } - if (user->seq < log_first_seq) { + if (user->seq < prb_first_valid_seq(prb)) { /* our last seen message is gone, return error and reset */ - user->idx = log_first_idx; - user->seq = log_first_seq; + user->seq = prb_first_valid_seq(prb); ret = -EPIPE; logbuf_unlock_irq(); goto out; } - msg = log_from_idx(user->idx); - len = msg_print_ext_header(user->buf, sizeof(user->buf), - msg, user->seq); + len = info_print_ext_header(user->buf, sizeof(user->buf), r->info); len += msg_print_ext_body(user->buf + len, sizeof(user->buf) - len, - log_dict(msg), msg->dict_len, - log_text(msg), msg->text_len); + &r->text_buf[0], r->info->text_len, + &r->info->dev_info); - user->idx = log_next(user->idx); - user->seq++; + user->seq = r->info->seq + 1; logbuf_unlock_irq(); if (len > count) { @@ -965,8 +835,7 @@ static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence) switch (whence) { case SEEK_SET: /* the first record */ - user->idx = log_first_idx; - user->seq = log_first_seq; + user->seq = prb_first_valid_seq(prb); break; case SEEK_DATA: /* @@ -974,13 +843,11 @@ static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence) * like issued by 'dmesg -c'. Reading /dev/kmsg itself * changes no global state, and does not clear anything. */ - user->idx = clear_idx; user->seq = clear_seq; break; case SEEK_END: /* after the last record */ - user->idx = log_next_idx; - user->seq = log_next_seq; + user->seq = prb_next_seq(prb); break; default: ret = -EINVAL; @@ -1000,9 +867,9 @@ static __poll_t devkmsg_poll(struct file *file, poll_table *wait) poll_wait(file, &log_wait, wait); logbuf_lock_irq(); - if (user->seq < log_next_seq) { + if (prb_read_valid(prb, user->seq, NULL)) { /* return error when data has vanished underneath us */ - if (user->seq < log_first_seq) + if (user->seq < prb_first_valid_seq(prb)) ret = EPOLLIN|EPOLLRDNORM|EPOLLERR|EPOLLPRI; else ret = EPOLLIN|EPOLLRDNORM; @@ -1037,9 +904,11 @@ static int devkmsg_open(struct inode *inode, struct file *file) mutex_init(&user->lock); + prb_rec_init_rd(&user->record, &user->info, + &user->text_buf[0], sizeof(user->text_buf)); + logbuf_lock_irq(); - user->idx = log_first_idx; - user->seq = log_first_seq; + user->seq = prb_first_valid_seq(prb); logbuf_unlock_irq(); file->private_data = user; @@ -1080,23 +949,58 @@ const struct file_operations kmsg_fops = { */ void log_buf_vmcoreinfo_setup(void) { - VMCOREINFO_SYMBOL(log_buf); - VMCOREINFO_SYMBOL(log_buf_len); - VMCOREINFO_SYMBOL(log_first_idx); - VMCOREINFO_SYMBOL(clear_idx); - VMCOREINFO_SYMBOL(log_next_idx); + struct dev_printk_info *dev_info = NULL; + + VMCOREINFO_SYMBOL(prb); + VMCOREINFO_SYMBOL(printk_rb_static); + VMCOREINFO_SYMBOL(clear_seq); + /* - * Export struct printk_log size and field offsets. User space tools can + * Export struct size and field offsets. User space tools can * parse it and detect any changes to structure down the line. */ - VMCOREINFO_STRUCT_SIZE(printk_log); - VMCOREINFO_OFFSET(printk_log, ts_nsec); - VMCOREINFO_OFFSET(printk_log, len); - VMCOREINFO_OFFSET(printk_log, text_len); - VMCOREINFO_OFFSET(printk_log, dict_len); -#ifdef CONFIG_PRINTK_CALLER - VMCOREINFO_OFFSET(printk_log, caller_id); -#endif + + VMCOREINFO_STRUCT_SIZE(printk_ringbuffer); + VMCOREINFO_OFFSET(printk_ringbuffer, desc_ring); + VMCOREINFO_OFFSET(printk_ringbuffer, text_data_ring); + VMCOREINFO_OFFSET(printk_ringbuffer, fail); + + VMCOREINFO_STRUCT_SIZE(prb_desc_ring); + VMCOREINFO_OFFSET(prb_desc_ring, count_bits); + VMCOREINFO_OFFSET(prb_desc_ring, descs); + VMCOREINFO_OFFSET(prb_desc_ring, infos); + VMCOREINFO_OFFSET(prb_desc_ring, head_id); + VMCOREINFO_OFFSET(prb_desc_ring, tail_id); + + VMCOREINFO_STRUCT_SIZE(prb_desc); + VMCOREINFO_OFFSET(prb_desc, state_var); + VMCOREINFO_OFFSET(prb_desc, text_blk_lpos); + + VMCOREINFO_STRUCT_SIZE(prb_data_blk_lpos); + VMCOREINFO_OFFSET(prb_data_blk_lpos, begin); + VMCOREINFO_OFFSET(prb_data_blk_lpos, next); + + VMCOREINFO_STRUCT_SIZE(printk_info); + VMCOREINFO_OFFSET(printk_info, seq); + VMCOREINFO_OFFSET(printk_info, ts_nsec); + VMCOREINFO_OFFSET(printk_info, text_len); + VMCOREINFO_OFFSET(printk_info, caller_id); + VMCOREINFO_OFFSET(printk_info, dev_info); + + VMCOREINFO_STRUCT_SIZE(dev_printk_info); + VMCOREINFO_OFFSET(dev_printk_info, subsystem); + VMCOREINFO_LENGTH(printk_info_subsystem, sizeof(dev_info->subsystem)); + VMCOREINFO_OFFSET(dev_printk_info, device); + VMCOREINFO_LENGTH(printk_info_device, sizeof(dev_info->device)); + + VMCOREINFO_STRUCT_SIZE(prb_data_ring); + VMCOREINFO_OFFSET(prb_data_ring, size_bits); + VMCOREINFO_OFFSET(prb_data_ring, data); + VMCOREINFO_OFFSET(prb_data_ring, head_lpos); + VMCOREINFO_OFFSET(prb_data_ring, tail_lpos); + + VMCOREINFO_SIZE(atomic_long_t); + VMCOREINFO_TYPE_OFFSET(atomic_long_t, counter); } #endif @@ -1174,11 +1078,46 @@ static void __init set_percpu_data_ready(void) __printk_percpu_data_ready = true; } +static unsigned int __init add_to_rb(struct printk_ringbuffer *rb, + struct printk_record *r) +{ + struct prb_reserved_entry e; + struct printk_record dest_r; + + prb_rec_init_wr(&dest_r, r->info->text_len); + + if (!prb_reserve(&e, rb, &dest_r)) + return 0; + + memcpy(&dest_r.text_buf[0], &r->text_buf[0], r->info->text_len); + dest_r.info->text_len = r->info->text_len; + dest_r.info->facility = r->info->facility; + dest_r.info->level = r->info->level; + dest_r.info->flags = r->info->flags; + dest_r.info->ts_nsec = r->info->ts_nsec; + dest_r.info->caller_id = r->info->caller_id; + memcpy(&dest_r.info->dev_info, &r->info->dev_info, sizeof(dest_r.info->dev_info)); + + prb_final_commit(&e); + + return prb_record_text_space(&e); +} + +static char setup_text_buf[LOG_LINE_MAX] __initdata; + void __init setup_log_buf(int early) { + struct printk_info *new_infos; + unsigned int new_descs_count; + struct prb_desc *new_descs; + struct printk_info info; + struct printk_record r; + size_t new_descs_size; + size_t new_infos_size; unsigned long flags; char *new_log_buf; unsigned int free; + u64 seq; /* * Some archs call setup_log_buf() multiple times - first is very @@ -1197,24 +1136,75 @@ void __init setup_log_buf(int early) if (!new_log_buf_len) return; + new_descs_count = new_log_buf_len >> PRB_AVGBITS; + if (new_descs_count == 0) { + pr_err("new_log_buf_len: %lu too small\n", new_log_buf_len); + return; + } + new_log_buf = memblock_alloc(new_log_buf_len, LOG_ALIGN); if (unlikely(!new_log_buf)) { - pr_err("log_buf_len: %lu bytes not available\n", - new_log_buf_len); + pr_err("log_buf_len: %lu text bytes not available\n", + new_log_buf_len); return; } + new_descs_size = new_descs_count * sizeof(struct prb_desc); + new_descs = memblock_alloc(new_descs_size, LOG_ALIGN); + if (unlikely(!new_descs)) { + pr_err("log_buf_len: %zu desc bytes not available\n", + new_descs_size); + goto err_free_log_buf; + } + + new_infos_size = new_descs_count * sizeof(struct printk_info); + new_infos = memblock_alloc(new_infos_size, LOG_ALIGN); + if (unlikely(!new_infos)) { + pr_err("log_buf_len: %zu info bytes not available\n", + new_infos_size); + goto err_free_descs; + } + + prb_rec_init_rd(&r, &info, &setup_text_buf[0], sizeof(setup_text_buf)); + + prb_init(&printk_rb_dynamic, + new_log_buf, ilog2(new_log_buf_len), + new_descs, ilog2(new_descs_count), + new_infos); + logbuf_lock_irqsave(flags); + log_buf_len = new_log_buf_len; log_buf = new_log_buf; new_log_buf_len = 0; - free = __LOG_BUF_LEN - log_next_idx; - memcpy(log_buf, __log_buf, __LOG_BUF_LEN); + + free = __LOG_BUF_LEN; + prb_for_each_record(0, &printk_rb_static, seq, &r) + free -= add_to_rb(&printk_rb_dynamic, &r); + + /* + * This is early enough that everything is still running on the + * boot CPU and interrupts are disabled. So no new messages will + * appear during the transition to the dynamic buffer. + */ + prb = &printk_rb_dynamic; + logbuf_unlock_irqrestore(flags); + if (seq != prb_next_seq(&printk_rb_static)) { + pr_err("dropped %llu messages\n", + prb_next_seq(&printk_rb_static) - seq); + } + pr_info("log_buf_len: %u bytes\n", log_buf_len); pr_info("early log buf free: %u(%u%%)\n", free, (free * 100) / __LOG_BUF_LEN); + return; + +err_free_descs: + memblock_free(__pa(new_descs), new_descs_size); +err_free_log_buf: + memblock_free(__pa(new_log_buf), new_log_buf_len); } static bool __read_mostly ignore_loglevel; @@ -1321,18 +1311,18 @@ static size_t print_caller(u32 id, char *buf) #define print_caller(id, buf) 0 #endif -static size_t print_prefix(const struct printk_log *msg, bool syslog, - bool time, char *buf) +static size_t info_print_prefix(const struct printk_info *info, bool syslog, + bool time, char *buf) { size_t len = 0; if (syslog) - len = print_syslog((msg->facility << 3) | msg->level, buf); + len = print_syslog((info->facility << 3) | info->level, buf); if (time) - len += print_time(msg->ts_nsec, buf + len); + len += print_time(info->ts_nsec, buf + len); - len += print_caller(msg->caller_id, buf + len); + len += print_caller(info->caller_id, buf + len); if (IS_ENABLED(CONFIG_PRINTK_CALLER) || time) { buf[len++] = ' '; @@ -1342,72 +1332,150 @@ static size_t print_prefix(const struct printk_log *msg, bool syslog, return len; } -static size_t msg_print_text(const struct printk_log *msg, bool syslog, - bool time, char *buf, size_t size) +/* + * Prepare the record for printing. The text is shifted within the given + * buffer to avoid a need for another one. The following operations are + * done: + * + * - Add prefix for each line. + * - Add the trailing newline that has been removed in vprintk_store(). + * - Drop truncated lines that do not longer fit into the buffer. + * + * Return: The length of the updated/prepared text, including the added + * prefixes and the newline. The dropped line(s) are not counted. + */ +static size_t record_print_text(struct printk_record *r, bool syslog, + bool time) { - const char *text = log_text(msg); - size_t text_size = msg->text_len; - size_t len = 0; + size_t text_len = r->info->text_len; + size_t buf_size = r->text_buf_size; + char *text = r->text_buf; char prefix[PREFIX_MAX]; - const size_t prefix_len = print_prefix(msg, syslog, time, prefix); + bool truncated = false; + size_t prefix_len; + size_t line_len; + size_t len = 0; + char *next; + + /* + * If the message was truncated because the buffer was not large + * enough, treat the available text as if it were the full text. + */ + if (text_len > buf_size) + text_len = buf_size; - do { - const char *next = memchr(text, '\n', text_size); - size_t text_len; + prefix_len = info_print_prefix(r->info, syslog, time, prefix); + /* + * @text_len: bytes of unprocessed text + * @line_len: bytes of current line _without_ newline + * @text: pointer to beginning of current line + * @len: number of bytes prepared in r->text_buf + */ + for (;;) { + next = memchr(text, '\n', text_len); if (next) { - text_len = next - text; - next++; - text_size -= next - text; + line_len = next - text; } else { - text_len = text_size; + /* Drop truncated line(s). */ + if (truncated) + break; + line_len = text_len; } - if (buf) { - if (prefix_len + text_len + 1 >= size - len) + /* + * Truncate the text if there is not enough space to add the + * prefix and a trailing newline. + */ + if (len + prefix_len + text_len + 1 > buf_size) { + /* Drop even the current line if no space. */ + if (len + prefix_len + line_len + 1 > buf_size) break; - memcpy(buf + len, prefix, prefix_len); - len += prefix_len; - memcpy(buf + len, text, text_len); - len += text_len; - buf[len++] = '\n'; - } else { - /* SYSLOG_ACTION_* buffer size only calculation */ - len += prefix_len + text_len + 1; + text_len = buf_size - len - prefix_len - 1; + truncated = true; } - text = next; - } while (text); + memmove(text + prefix_len, text, text_len); + memcpy(text, prefix, prefix_len); + + len += prefix_len + line_len + 1; + + if (text_len == line_len) { + /* + * Add the trailing newline removed in + * vprintk_store(). + */ + text[prefix_len + line_len] = '\n'; + break; + } + + /* + * Advance beyond the added prefix and the related line with + * its newline. + */ + text += prefix_len + line_len + 1; + + /* + * The remaining text has only decreased by the line with its + * newline. + * + * Note that @text_len can become zero. It happens when @text + * ended with a newline (either due to truncation or the + * original string ending with "\n\n"). The loop is correctly + * repeated and (if not truncated) an empty line with a prefix + * will be prepared. + */ + text_len -= line_len + 1; + } return len; } +static size_t get_record_print_text_size(struct printk_info *info, + unsigned int line_count, + bool syslog, bool time) +{ + char prefix[PREFIX_MAX]; + size_t prefix_len; + + prefix_len = info_print_prefix(info, syslog, time, prefix); + + /* + * Each line will be preceded with a prefix. The intermediate + * newlines are already within the text, but a final trailing + * newline will be added. + */ + return ((prefix_len * line_count) + info->text_len + 1); +} + static int syslog_print(char __user *buf, int size) { + struct printk_info info; + struct printk_record r; char *text; - struct printk_log *msg; int len = 0; text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL); if (!text) return -ENOMEM; + prb_rec_init_rd(&r, &info, text, LOG_LINE_MAX + PREFIX_MAX); + while (size > 0) { size_t n; size_t skip; logbuf_lock_irq(); - if (syslog_seq < log_first_seq) { - /* messages are gone, move to first one */ - syslog_seq = log_first_seq; - syslog_idx = log_first_idx; - syslog_partial = 0; - } - if (syslog_seq == log_next_seq) { + if (!prb_read_valid(prb, syslog_seq, &r)) { logbuf_unlock_irq(); break; } + if (r.info->seq != syslog_seq) { + /* message is gone, move to next valid one */ + syslog_seq = r.info->seq; + syslog_partial = 0; + } /* * To keep reading/counting partial line consistent, @@ -1417,13 +1485,10 @@ static int syslog_print(char __user *buf, int size) syslog_time = printk_time; skip = syslog_partial; - msg = log_from_idx(syslog_idx); - n = msg_print_text(msg, true, syslog_time, text, - LOG_LINE_MAX + PREFIX_MAX); + n = record_print_text(&r, true, syslog_time); if (n - syslog_partial <= size) { /* message fits into buffer, move forward */ - syslog_idx = log_next(syslog_idx); - syslog_seq++; + syslog_seq = r.info->seq + 1; n -= syslog_partial; syslog_partial = 0; } else if (!len){ @@ -1454,11 +1519,12 @@ static int syslog_print(char __user *buf, int size) static int syslog_print_all(char __user *buf, int size, bool clear) { + struct printk_info info; + unsigned int line_count; + struct printk_record r; char *text; int len = 0; - u64 next_seq; u64 seq; - u32 idx; bool time; text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL); @@ -1471,38 +1537,28 @@ static int syslog_print_all(char __user *buf, int size, bool clear) * Find first record that fits, including all following records, * into the user-provided buffer for this dump. */ - seq = clear_seq; - idx = clear_idx; - while (seq < log_next_seq) { - struct printk_log *msg = log_from_idx(idx); - - len += msg_print_text(msg, true, time, NULL, 0); - idx = log_next(idx); - seq++; - } + prb_for_each_info(clear_seq, prb, seq, &info, &line_count) + len += get_record_print_text_size(&info, line_count, true, time); /* move first record forward until length fits into the buffer */ - seq = clear_seq; - idx = clear_idx; - while (len > size && seq < log_next_seq) { - struct printk_log *msg = log_from_idx(idx); - - len -= msg_print_text(msg, true, time, NULL, 0); - idx = log_next(idx); - seq++; + prb_for_each_info(clear_seq, prb, seq, &info, &line_count) { + if (len <= size) + break; + len -= get_record_print_text_size(&info, line_count, true, time); } - /* last message fitting into this dump */ - next_seq = log_next_seq; + prb_rec_init_rd(&r, &info, text, LOG_LINE_MAX + PREFIX_MAX); len = 0; - while (len >= 0 && seq < next_seq) { - struct printk_log *msg = log_from_idx(idx); - int textlen = msg_print_text(msg, true, time, text, - LOG_LINE_MAX + PREFIX_MAX); + prb_for_each_record(seq, prb, seq, &r) { + int textlen; - idx = log_next(idx); - seq++; + textlen = record_print_text(&r, true, time); + + if (len + textlen > size) { + seq--; + break; + } logbuf_unlock_irq(); if (copy_to_user(buf + len, text, textlen)) @@ -1511,17 +1567,12 @@ static int syslog_print_all(char __user *buf, int size, bool clear) len += textlen; logbuf_lock_irq(); - if (seq < log_first_seq) { - /* messages are gone, move to next one */ - seq = log_first_seq; - idx = log_first_idx; - } + if (len < 0) + break; } - if (clear) { - clear_seq = log_next_seq; - clear_idx = log_next_idx; - } + if (clear) + clear_seq = seq; logbuf_unlock_irq(); kfree(text); @@ -1531,8 +1582,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear) static void syslog_clear(void) { logbuf_lock_irq(); - clear_seq = log_next_seq; - clear_idx = log_next_idx; + clear_seq = prb_next_seq(prb); logbuf_unlock_irq(); } @@ -1559,7 +1609,7 @@ int do_syslog(int type, char __user *buf, int len, int source) if (!access_ok(buf, len)) return -EFAULT; error = wait_event_interruptible(log_wait, - syslog_seq != log_next_seq); + prb_read_valid(prb, syslog_seq, NULL)); if (error) return error; error = syslog_print(buf, len); @@ -1567,7 +1617,7 @@ int do_syslog(int type, char __user *buf, int len, int source) /* Read/clear last kernel messages */ case SYSLOG_ACTION_READ_CLEAR: clear = true; - /* FALL THRU */ + fallthrough; /* Read last kernel messages */ case SYSLOG_ACTION_READ_ALL: if (!buf || len < 0) @@ -1608,10 +1658,9 @@ int do_syslog(int type, char __user *buf, int len, int source) /* Number of chars in the log buffer */ case SYSLOG_ACTION_SIZE_UNREAD: logbuf_lock_irq(); - if (syslog_seq < log_first_seq) { + if (syslog_seq < prb_first_valid_seq(prb)) { /* messages are gone, move to first one */ - syslog_seq = log_first_seq; - syslog_idx = log_first_idx; + syslog_seq = prb_first_valid_seq(prb); syslog_partial = 0; } if (source == SYSLOG_FROM_PROC) { @@ -1620,20 +1669,18 @@ int do_syslog(int type, char __user *buf, int len, int source) * for pending data, not the size; return the count of * records, not the length. */ - error = log_next_seq - syslog_seq; + error = prb_next_seq(prb) - syslog_seq; } else { - u64 seq = syslog_seq; - u32 idx = syslog_idx; bool time = syslog_partial ? syslog_time : printk_time; - - while (seq < log_next_seq) { - struct printk_log *msg = log_from_idx(idx); - - error += msg_print_text(msg, true, time, NULL, - 0); + struct printk_info info; + unsigned int line_count; + u64 seq; + + prb_for_each_info(syslog_seq, prb, seq, &info, + &line_count) { + error += get_record_print_text_size(&info, line_count, + true, time); time = printk_time; - idx = log_next(idx); - seq++; } error -= syslog_partial; } @@ -1804,10 +1851,22 @@ static int console_trylock_spinning(void) static void call_console_drivers(const char *ext_text, size_t ext_len, const char *text, size_t len) { + static char dropped_text[64]; + size_t dropped_len = 0; struct console *con; trace_console_rcuidle(text, len); + if (!console_drivers) + return; + + if (console_dropped) { + dropped_len = snprintf(dropped_text, sizeof(dropped_text), + "** %lu printk messages dropped **\n", + console_dropped); + console_dropped = 0; + } + for_each_console(con) { if (exclusive_console && con != exclusive_console) continue; @@ -1820,8 +1879,11 @@ static void call_console_drivers(const char *ext_text, size_t ext_len, continue; if (con->flags & CON_EXTENDED) con->write(con, ext_text, ext_len); - else + else { + if (dropped_len) + con->write(con, dropped_text, dropped_len); con->write(con, text, len); + } } } @@ -1845,97 +1907,38 @@ static inline u32 printk_caller_id(void) 0x80000000 + raw_smp_processor_id(); } -/* - * Continuation lines are buffered, and not committed to the record buffer - * until the line is complete, or a race forces it. The line fragments - * though, are printed immediately to the consoles to ensure everything has - * reached the console in case of a kernel crash. - */ -static struct cont { - char buf[LOG_LINE_MAX]; - size_t len; /* length == 0 means unused buffer */ - u32 caller_id; /* printk_caller_id() of first print */ - u64 ts_nsec; /* time of first print */ - u8 level; /* log level of first message */ - u8 facility; /* log facility of first message */ - enum log_flags flags; /* prefix, newline flags */ -} cont; - -static void cont_flush(void) -{ - if (cont.len == 0) - return; - - log_store(cont.caller_id, cont.facility, cont.level, cont.flags, - cont.ts_nsec, NULL, 0, cont.buf, cont.len); - cont.len = 0; -} - -static bool cont_add(u32 caller_id, int facility, int level, - enum log_flags flags, const char *text, size_t len) -{ - /* If the line gets too long, split it up in separate records. */ - if (cont.len + len > sizeof(cont.buf)) { - cont_flush(); - return false; - } - - if (!cont.len) { - cont.facility = facility; - cont.level = level; - cont.caller_id = caller_id; - cont.ts_nsec = local_clock(); - cont.flags = flags; - } - - memcpy(cont.buf + cont.len, text, len); - cont.len += len; - - // The original flags come from the first line, - // but later continuations can add a newline. - if (flags & LOG_NEWLINE) { - cont.flags |= LOG_NEWLINE; - cont_flush(); - } - - return true; -} - -static size_t log_output(int facility, int level, enum log_flags lflags, const char *dict, size_t dictlen, char *text, size_t text_len) +static size_t log_output(int facility, int level, enum log_flags lflags, + const struct dev_printk_info *dev_info, + char *text, size_t text_len) { const u32 caller_id = printk_caller_id(); - /* - * If an earlier line was buffered, and we're a continuation - * write from the same context, try to add it to the buffer. - */ - if (cont.len) { - if (cont.caller_id == caller_id && (lflags & LOG_CONT)) { - if (cont_add(caller_id, facility, level, lflags, text, text_len)) - return text_len; - } - /* Otherwise, make sure it's flushed */ - cont_flush(); - } - - /* Skip empty continuation lines that couldn't be added - they just flush */ - if (!text_len && (lflags & LOG_CONT)) - return 0; - - /* If it doesn't end in a newline, try to buffer the current line */ - if (!(lflags & LOG_NEWLINE)) { - if (cont_add(caller_id, facility, level, lflags, text, text_len)) + if (lflags & LOG_CONT) { + struct prb_reserved_entry e; + struct printk_record r; + + prb_rec_init_wr(&r, text_len); + if (prb_reserve_in_last(&e, prb, &r, caller_id, LOG_LINE_MAX)) { + memcpy(&r.text_buf[r.info->text_len], text, text_len); + r.info->text_len += text_len; + if (lflags & LOG_NEWLINE) { + r.info->flags |= LOG_NEWLINE; + prb_final_commit(&e); + } else { + prb_commit(&e); + } return text_len; + } } /* Store it in the record log */ return log_store(caller_id, facility, level, lflags, 0, - dict, dictlen, text, text_len); + dev_info, text, text_len); } /* Must be called under logbuf_lock. */ int vprintk_store(int facility, int level, - const char *dict, size_t dictlen, + const struct dev_printk_info *dev_info, const char *fmt, va_list args) { static char textbuf[LOG_LINE_MAX]; @@ -1977,21 +1980,19 @@ int vprintk_store(int facility, int level, if (level == LOGLEVEL_DEFAULT) level = default_message_loglevel; - if (dict) + if (dev_info) lflags |= LOG_NEWLINE; - return log_output(facility, level, lflags, - dict, dictlen, text, text_len); + return log_output(facility, level, lflags, dev_info, text, text_len); } asmlinkage int vprintk_emit(int facility, int level, - const char *dict, size_t dictlen, + const struct dev_printk_info *dev_info, const char *fmt, va_list args) { int printed_len; - bool in_sched = false, pending_output; + bool in_sched = false; unsigned long flags; - u64 curr_log_seq; /* Suppress unimportant messages after panic happens */ if (unlikely(suppress_printk)) @@ -2007,13 +2008,11 @@ asmlinkage int vprintk_emit(int facility, int level, /* This stops the holder of console_sem just where we want him */ logbuf_lock_irqsave(flags); - curr_log_seq = log_next_seq; - printed_len = vprintk_store(facility, level, dict, dictlen, fmt, args); - pending_output = (curr_log_seq != log_next_seq); + printed_len = vprintk_store(facility, level, dev_info, fmt, args); logbuf_unlock_irqrestore(flags); /* If called from the scheduler, we can not call up(). */ - if (!in_sched && pending_output) { + if (!in_sched) { /* * Disable preemption to avoid being preempted while holding * console_sem which would prevent anyone from printing to @@ -2030,8 +2029,7 @@ asmlinkage int vprintk_emit(int facility, int level, preempt_enable(); } - if (pending_output) - wake_up_klogd(); + wake_up_klogd(); return printed_len; } EXPORT_SYMBOL(vprintk_emit); @@ -2044,7 +2042,7 @@ EXPORT_SYMBOL(vprintk); int vprintk_default(const char *fmt, va_list args) { - return vprintk_emit(0, LOGLEVEL_DEFAULT, NULL, 0, fmt, args); + return vprintk_emit(0, LOGLEVEL_DEFAULT, NULL, fmt, args); } EXPORT_SYMBOL_GPL(vprintk_default); @@ -2088,30 +2086,31 @@ EXPORT_SYMBOL(printk); #define PREFIX_MAX 0 #define printk_time false +#define prb_read_valid(rb, seq, r) false +#define prb_first_valid_seq(rb) 0 + static u64 syslog_seq; -static u32 syslog_idx; static u64 console_seq; -static u32 console_idx; static u64 exclusive_console_stop_seq; -static u64 log_first_seq; -static u32 log_first_idx; -static u64 log_next_seq; -static char *log_text(const struct printk_log *msg) { return NULL; } -static char *log_dict(const struct printk_log *msg) { return NULL; } -static struct printk_log *log_from_idx(u32 idx) { return NULL; } -static u32 log_next(u32 idx) { return 0; } -static ssize_t msg_print_ext_header(char *buf, size_t size, - struct printk_log *msg, - u64 seq) { return 0; } +static unsigned long console_dropped; + +static size_t record_print_text(const struct printk_record *r, + bool syslog, bool time) +{ + return 0; +} +static ssize_t info_print_ext_header(char *buf, size_t size, + struct printk_info *info) +{ + return 0; +} static ssize_t msg_print_ext_body(char *buf, size_t size, - char *dict, size_t dict_len, - char *text, size_t text_len) { return 0; } + char *text, size_t text_len, + struct dev_printk_info *dev_info) { return 0; } static void console_lock_spinning_enable(void) { } static int console_lock_spinning_disable_and_check(void) { return 0; } static void call_console_drivers(const char *ext_text, size_t ext_len, const char *text, size_t len) {} -static size_t msg_print_text(const struct printk_log *msg, bool syslog, - bool time, char *buf, size_t size) { return 0; } static bool suppress_message_printing(int level) { return false; } #endif /* CONFIG_PRINTK */ @@ -2398,12 +2397,16 @@ void console_unlock(void) static char text[LOG_LINE_MAX + PREFIX_MAX]; unsigned long flags; bool do_cond_resched, retry; + struct printk_info info; + struct printk_record r; if (console_suspended) { up_console_sem(); return; } + prb_rec_init_rd(&r, &info, text, sizeof(text)); + /* * Console drivers are called with interrupts disabled, so * @console_may_schedule should be cleared before; however, we may @@ -2416,7 +2419,7 @@ void console_unlock(void) * * console_trylock() is not able to detect the preemptive * context reliably. Therefore the value must be stored before - * and cleared after the the "again" goto label. + * and cleared after the "again" goto label. */ do_cond_resched = console_may_schedule; again: @@ -2434,35 +2437,26 @@ again: } for (;;) { - struct printk_log *msg; size_t ext_len = 0; size_t len; printk_safe_enter_irqsave(flags); raw_spin_lock(&logbuf_lock); - if (console_seq < log_first_seq) { - len = snprintf(text, sizeof(text), - "** %llu printk messages dropped **\n", - log_first_seq - console_seq); - - /* messages are gone, move to first one */ - console_seq = log_first_seq; - console_idx = log_first_idx; - } else { - len = 0; - } skip: - if (console_seq == log_next_seq) + if (!prb_read_valid(prb, console_seq, &r)) break; - msg = log_from_idx(console_idx); - if (suppress_message_printing(msg->level)) { + if (console_seq != r.info->seq) { + console_dropped += r.info->seq - console_seq; + console_seq = r.info->seq; + } + + if (suppress_message_printing(r.info->level)) { /* * Skip record we have buffered and already printed * directly to the console when we received it, and * record that has level above the console loglevel. */ - console_idx = log_next(console_idx); console_seq++; goto skip; } @@ -2473,19 +2467,23 @@ skip: exclusive_console = NULL; } - len += msg_print_text(msg, - console_msg_format & MSG_FORMAT_SYSLOG, - printk_time, text + len, sizeof(text) - len); + /* + * Handle extended console text first because later + * record_print_text() will modify the record buffer in-place. + */ if (nr_ext_console_drivers) { - ext_len = msg_print_ext_header(ext_text, + ext_len = info_print_ext_header(ext_text, sizeof(ext_text), - msg, console_seq); + r.info); ext_len += msg_print_ext_body(ext_text + ext_len, sizeof(ext_text) - ext_len, - log_dict(msg), msg->dict_len, - log_text(msg), msg->text_len); + &r.text_buf[0], + r.info->text_len, + &r.info->dev_info); } - console_idx = log_next(console_idx); + len = record_print_text(&r, + console_msg_format & MSG_FORMAT_SYSLOG, + printk_time); console_seq++; raw_spin_unlock(&logbuf_lock); @@ -2525,7 +2523,7 @@ skip: * flush, no worries. */ raw_spin_lock(&logbuf_lock); - retry = console_seq != log_next_seq; + retry = prb_read_valid(prb, console_seq, NULL); raw_spin_unlock(&logbuf_lock); printk_safe_exit_irqrestore(flags); @@ -2594,8 +2592,7 @@ void console_flush_on_panic(enum con_flush_mode mode) unsigned long flags; logbuf_lock_irqsave(flags); - console_seq = log_first_seq; - console_idx = log_first_idx; + console_seq = prb_first_valid_seq(prb); logbuf_unlock_irqrestore(flags); } console_unlock(); @@ -2838,7 +2835,6 @@ void register_console(struct console *newcon) exclusive_console = newcon; exclusive_console_stop_seq = console_seq; console_seq = syslog_seq; - console_idx = syslog_idx; logbuf_unlock_irqrestore(flags); } console_unlock(); @@ -3062,7 +3058,7 @@ int vprintk_deferred(const char *fmt, va_list args) { int r; - r = vprintk_emit(0, LOGLEVEL_SCHED, NULL, 0, fmt, args); + r = vprintk_emit(0, LOGLEVEL_SCHED, NULL, fmt, args); defer_console_output(); return r; @@ -3227,9 +3223,7 @@ void kmsg_dump(enum kmsg_dump_reason reason) logbuf_lock_irqsave(flags); dumper->cur_seq = clear_seq; - dumper->cur_idx = clear_idx; - dumper->next_seq = log_next_seq; - dumper->next_idx = log_next_idx; + dumper->next_seq = prb_next_seq(prb); logbuf_unlock_irqrestore(flags); /* invoke dumper which will iterate over records */ @@ -3263,28 +3257,33 @@ void kmsg_dump(enum kmsg_dump_reason reason) bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog, char *line, size_t size, size_t *len) { - struct printk_log *msg; + struct printk_info info; + unsigned int line_count; + struct printk_record r; size_t l = 0; bool ret = false; + prb_rec_init_rd(&r, &info, line, size); + if (!dumper->active) goto out; - if (dumper->cur_seq < log_first_seq) { - /* messages are gone, move to first available one */ - dumper->cur_seq = log_first_seq; - dumper->cur_idx = log_first_idx; - } - - /* last entry */ - if (dumper->cur_seq >= log_next_seq) - goto out; + /* Read text or count text lines? */ + if (line) { + if (!prb_read_valid(prb, dumper->cur_seq, &r)) + goto out; + l = record_print_text(&r, syslog, printk_time); + } else { + if (!prb_read_valid_info(prb, dumper->cur_seq, + &info, &line_count)) { + goto out; + } + l = get_record_print_text_size(&info, line_count, syslog, + printk_time); - msg = log_from_idx(dumper->cur_idx); - l = msg_print_text(msg, syslog, printk_time, line, size); + } - dumper->cur_idx = log_next(dumper->cur_idx); - dumper->cur_seq++; + dumper->cur_seq = r.info->seq + 1; ret = true; out: if (len) @@ -3332,7 +3331,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line); * @len: length of line placed into buffer * * Start at the end of the kmsg buffer and fill the provided buffer - * with as many of the the *youngest* kmsg records that fit into it. + * with as many of the *youngest* kmsg records that fit into it. * If the buffer is large enough, all available kmsg records will be * copied with a single call. * @@ -3345,23 +3344,25 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line); bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog, char *buf, size_t size, size_t *len) { + struct printk_info info; + unsigned int line_count; + struct printk_record r; unsigned long flags; u64 seq; - u32 idx; u64 next_seq; - u32 next_idx; size_t l = 0; bool ret = false; bool time = printk_time; - if (!dumper->active) + prb_rec_init_rd(&r, &info, buf, size); + + if (!dumper->active || !buf || !size) goto out; logbuf_lock_irqsave(flags); - if (dumper->cur_seq < log_first_seq) { + if (dumper->cur_seq < prb_first_valid_seq(prb)) { /* messages are gone, move to first available one */ - dumper->cur_seq = log_first_seq; - dumper->cur_idx = log_first_idx; + dumper->cur_seq = prb_first_valid_seq(prb); } /* last entry */ @@ -3372,41 +3373,41 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog, /* calculate length of entire buffer */ seq = dumper->cur_seq; - idx = dumper->cur_idx; - while (seq < dumper->next_seq) { - struct printk_log *msg = log_from_idx(idx); - - l += msg_print_text(msg, true, time, NULL, 0); - idx = log_next(idx); - seq++; + while (prb_read_valid_info(prb, seq, &info, &line_count)) { + if (r.info->seq >= dumper->next_seq) + break; + l += get_record_print_text_size(&info, line_count, true, time); + seq = r.info->seq + 1; } /* move first record forward until length fits into the buffer */ seq = dumper->cur_seq; - idx = dumper->cur_idx; - while (l >= size && seq < dumper->next_seq) { - struct printk_log *msg = log_from_idx(idx); - - l -= msg_print_text(msg, true, time, NULL, 0); - idx = log_next(idx); - seq++; + while (l >= size && prb_read_valid_info(prb, seq, + &info, &line_count)) { + if (r.info->seq >= dumper->next_seq) + break; + l -= get_record_print_text_size(&info, line_count, true, time); + seq = r.info->seq + 1; } /* last message in next interation */ next_seq = seq; - next_idx = idx; + /* actually read text into the buffer now */ l = 0; - while (seq < dumper->next_seq) { - struct printk_log *msg = log_from_idx(idx); + while (prb_read_valid(prb, seq, &r)) { + if (r.info->seq >= dumper->next_seq) + break; + + l += record_print_text(&r, syslog, time); + + /* adjust record to store to remaining buffer space */ + prb_rec_init_rd(&r, &info, buf + l, size - l); - l += msg_print_text(msg, syslog, time, buf + l, size - l); - idx = log_next(idx); - seq++; + seq = r.info->seq + 1; } dumper->next_seq = next_seq; - dumper->next_idx = next_idx; ret = true; logbuf_unlock_irqrestore(flags); out: @@ -3429,9 +3430,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer); void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper) { dumper->cur_seq = clear_seq; - dumper->cur_idx = clear_idx; - dumper->next_seq = log_next_seq; - dumper->next_idx = log_next_idx; + dumper->next_seq = prb_next_seq(prb); } /** diff --git a/kernel/printk/printk_ringbuffer.c b/kernel/printk/printk_ringbuffer.c new file mode 100644 index 000000000000..2493348a1631 --- /dev/null +++ b/kernel/printk/printk_ringbuffer.c @@ -0,0 +1,2083 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/kernel.h> +#include <linux/irqflags.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/bug.h> +#include "printk_ringbuffer.h" + +/** + * DOC: printk_ringbuffer overview + * + * Data Structure + * -------------- + * The printk_ringbuffer is made up of 3 internal ringbuffers: + * + * desc_ring + * A ring of descriptors and their meta data (such as sequence number, + * timestamp, loglevel, etc.) as well as internal state information about + * the record and logical positions specifying where in the other + * ringbuffer the text strings are located. + * + * text_data_ring + * A ring of data blocks. A data block consists of an unsigned long + * integer (ID) that maps to a desc_ring index followed by the text + * string of the record. + * + * The internal state information of a descriptor is the key element to allow + * readers and writers to locklessly synchronize access to the data. + * + * Implementation + * -------------- + * + * Descriptor Ring + * ~~~~~~~~~~~~~~~ + * The descriptor ring is an array of descriptors. A descriptor contains + * essential meta data to track the data of a printk record using + * blk_lpos structs pointing to associated text data blocks (see + * "Data Rings" below). Each descriptor is assigned an ID that maps + * directly to index values of the descriptor array and has a state. The ID + * and the state are bitwise combined into a single descriptor field named + * @state_var, allowing ID and state to be synchronously and atomically + * updated. + * + * Descriptors have four states: + * + * reserved + * A writer is modifying the record. + * + * committed + * The record and all its data are written. A writer can reopen the + * descriptor (transitioning it back to reserved), but in the committed + * state the data is consistent. + * + * finalized + * The record and all its data are complete and available for reading. A + * writer cannot reopen the descriptor. + * + * reusable + * The record exists, but its text and/or meta data may no longer be + * available. + * + * Querying the @state_var of a record requires providing the ID of the + * descriptor to query. This can yield a possible fifth (pseudo) state: + * + * miss + * The descriptor being queried has an unexpected ID. + * + * The descriptor ring has a @tail_id that contains the ID of the oldest + * descriptor and @head_id that contains the ID of the newest descriptor. + * + * When a new descriptor should be created (and the ring is full), the tail + * descriptor is invalidated by first transitioning to the reusable state and + * then invalidating all tail data blocks up to and including the data blocks + * associated with the tail descriptor (for the text ring). Then + * @tail_id is advanced, followed by advancing @head_id. And finally the + * @state_var of the new descriptor is initialized to the new ID and reserved + * state. + * + * The @tail_id can only be advanced if the new @tail_id would be in the + * committed or reusable queried state. This makes it possible that a valid + * sequence number of the tail is always available. + * + * Descriptor Finalization + * ~~~~~~~~~~~~~~~~~~~~~~~ + * When a writer calls the commit function prb_commit(), record data is + * fully stored and is consistent within the ringbuffer. However, a writer can + * reopen that record, claiming exclusive access (as with prb_reserve()), and + * modify that record. When finished, the writer must again commit the record. + * + * In order for a record to be made available to readers (and also become + * recyclable for writers), it must be finalized. A finalized record cannot be + * reopened and can never become "unfinalized". Record finalization can occur + * in three different scenarios: + * + * 1) A writer can simultaneously commit and finalize its record by calling + * prb_final_commit() instead of prb_commit(). + * + * 2) When a new record is reserved and the previous record has been + * committed via prb_commit(), that previous record is automatically + * finalized. + * + * 3) When a record is committed via prb_commit() and a newer record + * already exists, the record being committed is automatically finalized. + * + * Data Ring + * ~~~~~~~~~ + * The text data ring is a byte array composed of data blocks. Data blocks are + * referenced by blk_lpos structs that point to the logical position of the + * beginning of a data block and the beginning of the next adjacent data + * block. Logical positions are mapped directly to index values of the byte + * array ringbuffer. + * + * Each data block consists of an ID followed by the writer data. The ID is + * the identifier of a descriptor that is associated with the data block. A + * given data block is considered valid if all of the following conditions + * are met: + * + * 1) The descriptor associated with the data block is in the committed + * or finalized queried state. + * + * 2) The blk_lpos struct within the descriptor associated with the data + * block references back to the same data block. + * + * 3) The data block is within the head/tail logical position range. + * + * If the writer data of a data block would extend beyond the end of the + * byte array, only the ID of the data block is stored at the logical + * position and the full data block (ID and writer data) is stored at the + * beginning of the byte array. The referencing blk_lpos will point to the + * ID before the wrap and the next data block will be at the logical + * position adjacent the full data block after the wrap. + * + * Data rings have a @tail_lpos that points to the beginning of the oldest + * data block and a @head_lpos that points to the logical position of the + * next (not yet existing) data block. + * + * When a new data block should be created (and the ring is full), tail data + * blocks will first be invalidated by putting their associated descriptors + * into the reusable state and then pushing the @tail_lpos forward beyond + * them. Then the @head_lpos is pushed forward and is associated with a new + * descriptor. If a data block is not valid, the @tail_lpos cannot be + * advanced beyond it. + * + * Info Array + * ~~~~~~~~~~ + * The general meta data of printk records are stored in printk_info structs, + * stored in an array with the same number of elements as the descriptor ring. + * Each info corresponds to the descriptor of the same index in the + * descriptor ring. Info validity is confirmed by evaluating the corresponding + * descriptor before and after loading the info. + * + * Usage + * ----- + * Here are some simple examples demonstrating writers and readers. For the + * examples a global ringbuffer (test_rb) is available (which is not the + * actual ringbuffer used by printk):: + * + * DEFINE_PRINTKRB(test_rb, 15, 5); + * + * This ringbuffer allows up to 32768 records (2 ^ 15) and has a size of + * 1 MiB (2 ^ (15 + 5)) for text data. + * + * Sample writer code:: + * + * const char *textstr = "message text"; + * struct prb_reserved_entry e; + * struct printk_record r; + * + * // specify how much to allocate + * prb_rec_init_wr(&r, strlen(textstr) + 1); + * + * if (prb_reserve(&e, &test_rb, &r)) { + * snprintf(r.text_buf, r.text_buf_size, "%s", textstr); + * + * r.info->text_len = strlen(textstr); + * r.info->ts_nsec = local_clock(); + * r.info->caller_id = printk_caller_id(); + * + * // commit and finalize the record + * prb_final_commit(&e); + * } + * + * Note that additional writer functions are available to extend a record + * after it has been committed but not yet finalized. This can be done as + * long as no new records have been reserved and the caller is the same. + * + * Sample writer code (record extending):: + * + * // alternate rest of previous example + * + * r.info->text_len = strlen(textstr); + * r.info->ts_nsec = local_clock(); + * r.info->caller_id = printk_caller_id(); + * + * // commit the record (but do not finalize yet) + * prb_commit(&e); + * } + * + * ... + * + * // specify additional 5 bytes text space to extend + * prb_rec_init_wr(&r, 5); + * + * // try to extend, but only if it does not exceed 32 bytes + * if (prb_reserve_in_last(&e, &test_rb, &r, printk_caller_id()), 32) { + * snprintf(&r.text_buf[r.info->text_len], + * r.text_buf_size - r.info->text_len, "hello"); + * + * r.info->text_len += 5; + * + * // commit and finalize the record + * prb_final_commit(&e); + * } + * + * Sample reader code:: + * + * struct printk_info info; + * struct printk_record r; + * char text_buf[32]; + * u64 seq; + * + * prb_rec_init_rd(&r, &info, &text_buf[0], sizeof(text_buf)); + * + * prb_for_each_record(0, &test_rb, &seq, &r) { + * if (info.seq != seq) + * pr_warn("lost %llu records\n", info.seq - seq); + * + * if (info.text_len > r.text_buf_size) { + * pr_warn("record %llu text truncated\n", info.seq); + * text_buf[r.text_buf_size - 1] = 0; + * } + * + * pr_info("%llu: %llu: %s\n", info.seq, info.ts_nsec, + * &text_buf[0]); + * } + * + * Note that additional less convenient reader functions are available to + * allow complex record access. + * + * ABA Issues + * ~~~~~~~~~~ + * To help avoid ABA issues, descriptors are referenced by IDs (array index + * values combined with tagged bits counting array wraps) and data blocks are + * referenced by logical positions (array index values combined with tagged + * bits counting array wraps). However, on 32-bit systems the number of + * tagged bits is relatively small such that an ABA incident is (at least + * theoretically) possible. For example, if 4 million maximally sized (1KiB) + * printk messages were to occur in NMI context on a 32-bit system, the + * interrupted context would not be able to recognize that the 32-bit integer + * completely wrapped and thus represents a different data block than the one + * the interrupted context expects. + * + * To help combat this possibility, additional state checking is performed + * (such as using cmpxchg() even though set() would suffice). These extra + * checks are commented as such and will hopefully catch any ABA issue that + * a 32-bit system might experience. + * + * Memory Barriers + * ~~~~~~~~~~~~~~~ + * Multiple memory barriers are used. To simplify proving correctness and + * generating litmus tests, lines of code related to memory barriers + * (loads, stores, and the associated memory barriers) are labeled:: + * + * LMM(function:letter) + * + * Comments reference the labels using only the "function:letter" part. + * + * The memory barrier pairs and their ordering are: + * + * desc_reserve:D / desc_reserve:B + * push descriptor tail (id), then push descriptor head (id) + * + * desc_reserve:D / data_push_tail:B + * push data tail (lpos), then set new descriptor reserved (state) + * + * desc_reserve:D / desc_push_tail:C + * push descriptor tail (id), then set new descriptor reserved (state) + * + * desc_reserve:D / prb_first_seq:C + * push descriptor tail (id), then set new descriptor reserved (state) + * + * desc_reserve:F / desc_read:D + * set new descriptor id and reserved (state), then allow writer changes + * + * data_alloc:A (or data_realloc:A) / desc_read:D + * set old descriptor reusable (state), then modify new data block area + * + * data_alloc:A (or data_realloc:A) / data_push_tail:B + * push data tail (lpos), then modify new data block area + * + * _prb_commit:B / desc_read:B + * store writer changes, then set new descriptor committed (state) + * + * desc_reopen_last:A / _prb_commit:B + * set descriptor reserved (state), then read descriptor data + * + * _prb_commit:B / desc_reserve:D + * set new descriptor committed (state), then check descriptor head (id) + * + * data_push_tail:D / data_push_tail:A + * set descriptor reusable (state), then push data tail (lpos) + * + * desc_push_tail:B / desc_reserve:D + * set descriptor reusable (state), then push descriptor tail (id) + */ + +#define DATA_SIZE(data_ring) _DATA_SIZE((data_ring)->size_bits) +#define DATA_SIZE_MASK(data_ring) (DATA_SIZE(data_ring) - 1) + +#define DESCS_COUNT(desc_ring) _DESCS_COUNT((desc_ring)->count_bits) +#define DESCS_COUNT_MASK(desc_ring) (DESCS_COUNT(desc_ring) - 1) + +/* Determine the data array index from a logical position. */ +#define DATA_INDEX(data_ring, lpos) ((lpos) & DATA_SIZE_MASK(data_ring)) + +/* Determine the desc array index from an ID or sequence number. */ +#define DESC_INDEX(desc_ring, n) ((n) & DESCS_COUNT_MASK(desc_ring)) + +/* Determine how many times the data array has wrapped. */ +#define DATA_WRAPS(data_ring, lpos) ((lpos) >> (data_ring)->size_bits) + +/* Determine if a logical position refers to a data-less block. */ +#define LPOS_DATALESS(lpos) ((lpos) & 1UL) +#define BLK_DATALESS(blk) (LPOS_DATALESS((blk)->begin) && \ + LPOS_DATALESS((blk)->next)) + +/* Get the logical position at index 0 of the current wrap. */ +#define DATA_THIS_WRAP_START_LPOS(data_ring, lpos) \ +((lpos) & ~DATA_SIZE_MASK(data_ring)) + +/* Get the ID for the same index of the previous wrap as the given ID. */ +#define DESC_ID_PREV_WRAP(desc_ring, id) \ +DESC_ID((id) - DESCS_COUNT(desc_ring)) + +/* + * A data block: mapped directly to the beginning of the data block area + * specified as a logical position within the data ring. + * + * @id: the ID of the associated descriptor + * @data: the writer data + * + * Note that the size of a data block is only known by its associated + * descriptor. + */ +struct prb_data_block { + unsigned long id; + char data[0]; +}; + +/* + * Return the descriptor associated with @n. @n can be either a + * descriptor ID or a sequence number. + */ +static struct prb_desc *to_desc(struct prb_desc_ring *desc_ring, u64 n) +{ + return &desc_ring->descs[DESC_INDEX(desc_ring, n)]; +} + +/* + * Return the printk_info associated with @n. @n can be either a + * descriptor ID or a sequence number. + */ +static struct printk_info *to_info(struct prb_desc_ring *desc_ring, u64 n) +{ + return &desc_ring->infos[DESC_INDEX(desc_ring, n)]; +} + +static struct prb_data_block *to_block(struct prb_data_ring *data_ring, + unsigned long begin_lpos) +{ + return (void *)&data_ring->data[DATA_INDEX(data_ring, begin_lpos)]; +} + +/* + * Increase the data size to account for data block meta data plus any + * padding so that the adjacent data block is aligned on the ID size. + */ +static unsigned int to_blk_size(unsigned int size) +{ + struct prb_data_block *db = NULL; + + size += sizeof(*db); + size = ALIGN(size, sizeof(db->id)); + return size; +} + +/* + * Sanity checker for reserve size. The ringbuffer code assumes that a data + * block does not exceed the maximum possible size that could fit within the + * ringbuffer. This function provides that basic size check so that the + * assumption is safe. + */ +static bool data_check_size(struct prb_data_ring *data_ring, unsigned int size) +{ + struct prb_data_block *db = NULL; + + if (size == 0) + return true; + + /* + * Ensure the alignment padded size could possibly fit in the data + * array. The largest possible data block must still leave room for + * at least the ID of the next block. + */ + size = to_blk_size(size); + if (size > DATA_SIZE(data_ring) - sizeof(db->id)) + return false; + + return true; +} + +/* Query the state of a descriptor. */ +static enum desc_state get_desc_state(unsigned long id, + unsigned long state_val) +{ + if (id != DESC_ID(state_val)) + return desc_miss; + + return DESC_STATE(state_val); +} + +/* + * Get a copy of a specified descriptor and return its queried state. If the + * descriptor is in an inconsistent state (miss or reserved), the caller can + * only expect the descriptor's @state_var field to be valid. + * + * The sequence number and caller_id can be optionally retrieved. Like all + * non-state_var data, they are only valid if the descriptor is in a + * consistent state. + */ +static enum desc_state desc_read(struct prb_desc_ring *desc_ring, + unsigned long id, struct prb_desc *desc_out, + u64 *seq_out, u32 *caller_id_out) +{ + struct printk_info *info = to_info(desc_ring, id); + struct prb_desc *desc = to_desc(desc_ring, id); + atomic_long_t *state_var = &desc->state_var; + enum desc_state d_state; + unsigned long state_val; + + /* Check the descriptor state. */ + state_val = atomic_long_read(state_var); /* LMM(desc_read:A) */ + d_state = get_desc_state(id, state_val); + if (d_state == desc_miss || d_state == desc_reserved) { + /* + * The descriptor is in an inconsistent state. Set at least + * @state_var so that the caller can see the details of + * the inconsistent state. + */ + goto out; + } + + /* + * Guarantee the state is loaded before copying the descriptor + * content. This avoids copying obsolete descriptor content that might + * not apply to the descriptor state. This pairs with _prb_commit:B. + * + * Memory barrier involvement: + * + * If desc_read:A reads from _prb_commit:B, then desc_read:C reads + * from _prb_commit:A. + * + * Relies on: + * + * WMB from _prb_commit:A to _prb_commit:B + * matching + * RMB from desc_read:A to desc_read:C + */ + smp_rmb(); /* LMM(desc_read:B) */ + + /* + * Copy the descriptor data. The data is not valid until the + * state has been re-checked. A memcpy() for all of @desc + * cannot be used because of the atomic_t @state_var field. + */ + memcpy(&desc_out->text_blk_lpos, &desc->text_blk_lpos, + sizeof(desc_out->text_blk_lpos)); /* LMM(desc_read:C) */ + if (seq_out) + *seq_out = info->seq; /* also part of desc_read:C */ + if (caller_id_out) + *caller_id_out = info->caller_id; /* also part of desc_read:C */ + + /* + * 1. Guarantee the descriptor content is loaded before re-checking + * the state. This avoids reading an obsolete descriptor state + * that may not apply to the copied content. This pairs with + * desc_reserve:F. + * + * Memory barrier involvement: + * + * If desc_read:C reads from desc_reserve:G, then desc_read:E + * reads from desc_reserve:F. + * + * Relies on: + * + * WMB from desc_reserve:F to desc_reserve:G + * matching + * RMB from desc_read:C to desc_read:E + * + * 2. Guarantee the record data is loaded before re-checking the + * state. This avoids reading an obsolete descriptor state that may + * not apply to the copied data. This pairs with data_alloc:A and + * data_realloc:A. + * + * Memory barrier involvement: + * + * If copy_data:A reads from data_alloc:B, then desc_read:E + * reads from desc_make_reusable:A. + * + * Relies on: + * + * MB from desc_make_reusable:A to data_alloc:B + * matching + * RMB from desc_read:C to desc_read:E + * + * Note: desc_make_reusable:A and data_alloc:B can be different + * CPUs. However, the data_alloc:B CPU (which performs the + * full memory barrier) must have previously seen + * desc_make_reusable:A. + */ + smp_rmb(); /* LMM(desc_read:D) */ + + /* + * The data has been copied. Return the current descriptor state, + * which may have changed since the load above. + */ + state_val = atomic_long_read(state_var); /* LMM(desc_read:E) */ + d_state = get_desc_state(id, state_val); +out: + atomic_long_set(&desc_out->state_var, state_val); + return d_state; +} + +/* + * Take a specified descriptor out of the finalized state by attempting + * the transition from finalized to reusable. Either this context or some + * other context will have been successful. + */ +static void desc_make_reusable(struct prb_desc_ring *desc_ring, + unsigned long id) +{ + unsigned long val_finalized = DESC_SV(id, desc_finalized); + unsigned long val_reusable = DESC_SV(id, desc_reusable); + struct prb_desc *desc = to_desc(desc_ring, id); + atomic_long_t *state_var = &desc->state_var; + + atomic_long_cmpxchg_relaxed(state_var, val_finalized, + val_reusable); /* LMM(desc_make_reusable:A) */ +} + +/* + * Given the text data ring, put the associated descriptor of each + * data block from @lpos_begin until @lpos_end into the reusable state. + * + * If there is any problem making the associated descriptor reusable, either + * the descriptor has not yet been finalized or another writer context has + * already pushed the tail lpos past the problematic data block. Regardless, + * on error the caller can re-load the tail lpos to determine the situation. + */ +static bool data_make_reusable(struct printk_ringbuffer *rb, + struct prb_data_ring *data_ring, + unsigned long lpos_begin, + unsigned long lpos_end, + unsigned long *lpos_out) +{ + struct prb_desc_ring *desc_ring = &rb->desc_ring; + struct prb_data_block *blk; + enum desc_state d_state; + struct prb_desc desc; + struct prb_data_blk_lpos *blk_lpos = &desc.text_blk_lpos; + unsigned long id; + + /* Loop until @lpos_begin has advanced to or beyond @lpos_end. */ + while ((lpos_end - lpos_begin) - 1 < DATA_SIZE(data_ring)) { + blk = to_block(data_ring, lpos_begin); + + /* + * Load the block ID from the data block. This is a data race + * against a writer that may have newly reserved this data + * area. If the loaded value matches a valid descriptor ID, + * the blk_lpos of that descriptor will be checked to make + * sure it points back to this data block. If the check fails, + * the data area has been recycled by another writer. + */ + id = blk->id; /* LMM(data_make_reusable:A) */ + + d_state = desc_read(desc_ring, id, &desc, + NULL, NULL); /* LMM(data_make_reusable:B) */ + + switch (d_state) { + case desc_miss: + case desc_reserved: + case desc_committed: + return false; + case desc_finalized: + /* + * This data block is invalid if the descriptor + * does not point back to it. + */ + if (blk_lpos->begin != lpos_begin) + return false; + desc_make_reusable(desc_ring, id); + break; + case desc_reusable: + /* + * This data block is invalid if the descriptor + * does not point back to it. + */ + if (blk_lpos->begin != lpos_begin) + return false; + break; + } + + /* Advance @lpos_begin to the next data block. */ + lpos_begin = blk_lpos->next; + } + + *lpos_out = lpos_begin; + return true; +} + +/* + * Advance the data ring tail to at least @lpos. This function puts + * descriptors into the reusable state if the tail is pushed beyond + * their associated data block. + */ +static bool data_push_tail(struct printk_ringbuffer *rb, + struct prb_data_ring *data_ring, + unsigned long lpos) +{ + unsigned long tail_lpos_new; + unsigned long tail_lpos; + unsigned long next_lpos; + + /* If @lpos is from a data-less block, there is nothing to do. */ + if (LPOS_DATALESS(lpos)) + return true; + + /* + * Any descriptor states that have transitioned to reusable due to the + * data tail being pushed to this loaded value will be visible to this + * CPU. This pairs with data_push_tail:D. + * + * Memory barrier involvement: + * + * If data_push_tail:A reads from data_push_tail:D, then this CPU can + * see desc_make_reusable:A. + * + * Relies on: + * + * MB from desc_make_reusable:A to data_push_tail:D + * matches + * READFROM from data_push_tail:D to data_push_tail:A + * thus + * READFROM from desc_make_reusable:A to this CPU + */ + tail_lpos = atomic_long_read(&data_ring->tail_lpos); /* LMM(data_push_tail:A) */ + + /* + * Loop until the tail lpos is at or beyond @lpos. This condition + * may already be satisfied, resulting in no full memory barrier + * from data_push_tail:D being performed. However, since this CPU + * sees the new tail lpos, any descriptor states that transitioned to + * the reusable state must already be visible. + */ + while ((lpos - tail_lpos) - 1 < DATA_SIZE(data_ring)) { + /* + * Make all descriptors reusable that are associated with + * data blocks before @lpos. + */ + if (!data_make_reusable(rb, data_ring, tail_lpos, lpos, + &next_lpos)) { + /* + * 1. Guarantee the block ID loaded in + * data_make_reusable() is performed before + * reloading the tail lpos. The failed + * data_make_reusable() may be due to a newly + * recycled data area causing the tail lpos to + * have been previously pushed. This pairs with + * data_alloc:A and data_realloc:A. + * + * Memory barrier involvement: + * + * If data_make_reusable:A reads from data_alloc:B, + * then data_push_tail:C reads from + * data_push_tail:D. + * + * Relies on: + * + * MB from data_push_tail:D to data_alloc:B + * matching + * RMB from data_make_reusable:A to + * data_push_tail:C + * + * Note: data_push_tail:D and data_alloc:B can be + * different CPUs. However, the data_alloc:B + * CPU (which performs the full memory + * barrier) must have previously seen + * data_push_tail:D. + * + * 2. Guarantee the descriptor state loaded in + * data_make_reusable() is performed before + * reloading the tail lpos. The failed + * data_make_reusable() may be due to a newly + * recycled descriptor causing the tail lpos to + * have been previously pushed. This pairs with + * desc_reserve:D. + * + * Memory barrier involvement: + * + * If data_make_reusable:B reads from + * desc_reserve:F, then data_push_tail:C reads + * from data_push_tail:D. + * + * Relies on: + * + * MB from data_push_tail:D to desc_reserve:F + * matching + * RMB from data_make_reusable:B to + * data_push_tail:C + * + * Note: data_push_tail:D and desc_reserve:F can + * be different CPUs. However, the + * desc_reserve:F CPU (which performs the + * full memory barrier) must have previously + * seen data_push_tail:D. + */ + smp_rmb(); /* LMM(data_push_tail:B) */ + + tail_lpos_new = atomic_long_read(&data_ring->tail_lpos + ); /* LMM(data_push_tail:C) */ + if (tail_lpos_new == tail_lpos) + return false; + + /* Another CPU pushed the tail. Try again. */ + tail_lpos = tail_lpos_new; + continue; + } + + /* + * Guarantee any descriptor states that have transitioned to + * reusable are stored before pushing the tail lpos. A full + * memory barrier is needed since other CPUs may have made + * the descriptor states reusable. This pairs with + * data_push_tail:A. + */ + if (atomic_long_try_cmpxchg(&data_ring->tail_lpos, &tail_lpos, + next_lpos)) { /* LMM(data_push_tail:D) */ + break; + } + } + + return true; +} + +/* + * Advance the desc ring tail. This function advances the tail by one + * descriptor, thus invalidating the oldest descriptor. Before advancing + * the tail, the tail descriptor is made reusable and all data blocks up to + * and including the descriptor's data block are invalidated (i.e. the data + * ring tail is pushed past the data block of the descriptor being made + * reusable). + */ +static bool desc_push_tail(struct printk_ringbuffer *rb, + unsigned long tail_id) +{ + struct prb_desc_ring *desc_ring = &rb->desc_ring; + enum desc_state d_state; + struct prb_desc desc; + + d_state = desc_read(desc_ring, tail_id, &desc, NULL, NULL); + + switch (d_state) { + case desc_miss: + /* + * If the ID is exactly 1 wrap behind the expected, it is + * in the process of being reserved by another writer and + * must be considered reserved. + */ + if (DESC_ID(atomic_long_read(&desc.state_var)) == + DESC_ID_PREV_WRAP(desc_ring, tail_id)) { + return false; + } + + /* + * The ID has changed. Another writer must have pushed the + * tail and recycled the descriptor already. Success is + * returned because the caller is only interested in the + * specified tail being pushed, which it was. + */ + return true; + case desc_reserved: + case desc_committed: + return false; + case desc_finalized: + desc_make_reusable(desc_ring, tail_id); + break; + case desc_reusable: + break; + } + + /* + * Data blocks must be invalidated before their associated + * descriptor can be made available for recycling. Invalidating + * them later is not possible because there is no way to trust + * data blocks once their associated descriptor is gone. + */ + + if (!data_push_tail(rb, &rb->text_data_ring, desc.text_blk_lpos.next)) + return false; + + /* + * Check the next descriptor after @tail_id before pushing the tail + * to it because the tail must always be in a finalized or reusable + * state. The implementation of prb_first_seq() relies on this. + * + * A successful read implies that the next descriptor is less than or + * equal to @head_id so there is no risk of pushing the tail past the + * head. + */ + d_state = desc_read(desc_ring, DESC_ID(tail_id + 1), &desc, + NULL, NULL); /* LMM(desc_push_tail:A) */ + + if (d_state == desc_finalized || d_state == desc_reusable) { + /* + * Guarantee any descriptor states that have transitioned to + * reusable are stored before pushing the tail ID. This allows + * verifying the recycled descriptor state. A full memory + * barrier is needed since other CPUs may have made the + * descriptor states reusable. This pairs with desc_reserve:D. + */ + atomic_long_cmpxchg(&desc_ring->tail_id, tail_id, + DESC_ID(tail_id + 1)); /* LMM(desc_push_tail:B) */ + } else { + /* + * Guarantee the last state load from desc_read() is before + * reloading @tail_id in order to see a new tail ID in the + * case that the descriptor has been recycled. This pairs + * with desc_reserve:D. + * + * Memory barrier involvement: + * + * If desc_push_tail:A reads from desc_reserve:F, then + * desc_push_tail:D reads from desc_push_tail:B. + * + * Relies on: + * + * MB from desc_push_tail:B to desc_reserve:F + * matching + * RMB from desc_push_tail:A to desc_push_tail:D + * + * Note: desc_push_tail:B and desc_reserve:F can be different + * CPUs. However, the desc_reserve:F CPU (which performs + * the full memory barrier) must have previously seen + * desc_push_tail:B. + */ + smp_rmb(); /* LMM(desc_push_tail:C) */ + + /* + * Re-check the tail ID. The descriptor following @tail_id is + * not in an allowed tail state. But if the tail has since + * been moved by another CPU, then it does not matter. + */ + if (atomic_long_read(&desc_ring->tail_id) == tail_id) /* LMM(desc_push_tail:D) */ + return false; + } + + return true; +} + +/* Reserve a new descriptor, invalidating the oldest if necessary. */ +static bool desc_reserve(struct printk_ringbuffer *rb, unsigned long *id_out) +{ + struct prb_desc_ring *desc_ring = &rb->desc_ring; + unsigned long prev_state_val; + unsigned long id_prev_wrap; + struct prb_desc *desc; + unsigned long head_id; + unsigned long id; + + head_id = atomic_long_read(&desc_ring->head_id); /* LMM(desc_reserve:A) */ + + do { + desc = to_desc(desc_ring, head_id); + + id = DESC_ID(head_id + 1); + id_prev_wrap = DESC_ID_PREV_WRAP(desc_ring, id); + + /* + * Guarantee the head ID is read before reading the tail ID. + * Since the tail ID is updated before the head ID, this + * guarantees that @id_prev_wrap is never ahead of the tail + * ID. This pairs with desc_reserve:D. + * + * Memory barrier involvement: + * + * If desc_reserve:A reads from desc_reserve:D, then + * desc_reserve:C reads from desc_push_tail:B. + * + * Relies on: + * + * MB from desc_push_tail:B to desc_reserve:D + * matching + * RMB from desc_reserve:A to desc_reserve:C + * + * Note: desc_push_tail:B and desc_reserve:D can be different + * CPUs. However, the desc_reserve:D CPU (which performs + * the full memory barrier) must have previously seen + * desc_push_tail:B. + */ + smp_rmb(); /* LMM(desc_reserve:B) */ + + if (id_prev_wrap == atomic_long_read(&desc_ring->tail_id + )) { /* LMM(desc_reserve:C) */ + /* + * Make space for the new descriptor by + * advancing the tail. + */ + if (!desc_push_tail(rb, id_prev_wrap)) + return false; + } + + /* + * 1. Guarantee the tail ID is read before validating the + * recycled descriptor state. A read memory barrier is + * sufficient for this. This pairs with desc_push_tail:B. + * + * Memory barrier involvement: + * + * If desc_reserve:C reads from desc_push_tail:B, then + * desc_reserve:E reads from desc_make_reusable:A. + * + * Relies on: + * + * MB from desc_make_reusable:A to desc_push_tail:B + * matching + * RMB from desc_reserve:C to desc_reserve:E + * + * Note: desc_make_reusable:A and desc_push_tail:B can be + * different CPUs. However, the desc_push_tail:B CPU + * (which performs the full memory barrier) must have + * previously seen desc_make_reusable:A. + * + * 2. Guarantee the tail ID is stored before storing the head + * ID. This pairs with desc_reserve:B. + * + * 3. Guarantee any data ring tail changes are stored before + * recycling the descriptor. Data ring tail changes can + * happen via desc_push_tail()->data_push_tail(). A full + * memory barrier is needed since another CPU may have + * pushed the data ring tails. This pairs with + * data_push_tail:B. + * + * 4. Guarantee a new tail ID is stored before recycling the + * descriptor. A full memory barrier is needed since + * another CPU may have pushed the tail ID. This pairs + * with desc_push_tail:C and this also pairs with + * prb_first_seq:C. + * + * 5. Guarantee the head ID is stored before trying to + * finalize the previous descriptor. This pairs with + * _prb_commit:B. + */ + } while (!atomic_long_try_cmpxchg(&desc_ring->head_id, &head_id, + id)); /* LMM(desc_reserve:D) */ + + desc = to_desc(desc_ring, id); + + /* + * If the descriptor has been recycled, verify the old state val. + * See "ABA Issues" about why this verification is performed. + */ + prev_state_val = atomic_long_read(&desc->state_var); /* LMM(desc_reserve:E) */ + if (prev_state_val && + get_desc_state(id_prev_wrap, prev_state_val) != desc_reusable) { + WARN_ON_ONCE(1); + return false; + } + + /* + * Assign the descriptor a new ID and set its state to reserved. + * See "ABA Issues" about why cmpxchg() instead of set() is used. + * + * Guarantee the new descriptor ID and state is stored before making + * any other changes. A write memory barrier is sufficient for this. + * This pairs with desc_read:D. + */ + if (!atomic_long_try_cmpxchg(&desc->state_var, &prev_state_val, + DESC_SV(id, desc_reserved))) { /* LMM(desc_reserve:F) */ + WARN_ON_ONCE(1); + return false; + } + + /* Now data in @desc can be modified: LMM(desc_reserve:G) */ + + *id_out = id; + return true; +} + +/* Determine the end of a data block. */ +static unsigned long get_next_lpos(struct prb_data_ring *data_ring, + unsigned long lpos, unsigned int size) +{ + unsigned long begin_lpos; + unsigned long next_lpos; + + begin_lpos = lpos; + next_lpos = lpos + size; + + /* First check if the data block does not wrap. */ + if (DATA_WRAPS(data_ring, begin_lpos) == DATA_WRAPS(data_ring, next_lpos)) + return next_lpos; + + /* Wrapping data blocks store their data at the beginning. */ + return (DATA_THIS_WRAP_START_LPOS(data_ring, next_lpos) + size); +} + +/* + * Allocate a new data block, invalidating the oldest data block(s) + * if necessary. This function also associates the data block with + * a specified descriptor. + */ +static char *data_alloc(struct printk_ringbuffer *rb, + struct prb_data_ring *data_ring, unsigned int size, + struct prb_data_blk_lpos *blk_lpos, unsigned long id) +{ + struct prb_data_block *blk; + unsigned long begin_lpos; + unsigned long next_lpos; + + if (size == 0) { + /* Specify a data-less block. */ + blk_lpos->begin = NO_LPOS; + blk_lpos->next = NO_LPOS; + return NULL; + } + + size = to_blk_size(size); + + begin_lpos = atomic_long_read(&data_ring->head_lpos); + + do { + next_lpos = get_next_lpos(data_ring, begin_lpos, size); + + if (!data_push_tail(rb, data_ring, next_lpos - DATA_SIZE(data_ring))) { + /* Failed to allocate, specify a data-less block. */ + blk_lpos->begin = FAILED_LPOS; + blk_lpos->next = FAILED_LPOS; + return NULL; + } + + /* + * 1. Guarantee any descriptor states that have transitioned + * to reusable are stored before modifying the newly + * allocated data area. A full memory barrier is needed + * since other CPUs may have made the descriptor states + * reusable. See data_push_tail:A about why the reusable + * states are visible. This pairs with desc_read:D. + * + * 2. Guarantee any updated tail lpos is stored before + * modifying the newly allocated data area. Another CPU may + * be in data_make_reusable() and is reading a block ID + * from this area. data_make_reusable() can handle reading + * a garbage block ID value, but then it must be able to + * load a new tail lpos. A full memory barrier is needed + * since other CPUs may have updated the tail lpos. This + * pairs with data_push_tail:B. + */ + } while (!atomic_long_try_cmpxchg(&data_ring->head_lpos, &begin_lpos, + next_lpos)); /* LMM(data_alloc:A) */ + + blk = to_block(data_ring, begin_lpos); + blk->id = id; /* LMM(data_alloc:B) */ + + if (DATA_WRAPS(data_ring, begin_lpos) != DATA_WRAPS(data_ring, next_lpos)) { + /* Wrapping data blocks store their data at the beginning. */ + blk = to_block(data_ring, 0); + + /* + * Store the ID on the wrapped block for consistency. + * The printk_ringbuffer does not actually use it. + */ + blk->id = id; + } + + blk_lpos->begin = begin_lpos; + blk_lpos->next = next_lpos; + + return &blk->data[0]; +} + +/* + * Try to resize an existing data block associated with the descriptor + * specified by @id. If the resized data block should become wrapped, it + * copies the old data to the new data block. If @size yields a data block + * with the same or less size, the data block is left as is. + * + * Fail if this is not the last allocated data block or if there is not + * enough space or it is not possible make enough space. + * + * Return a pointer to the beginning of the entire data buffer or NULL on + * failure. + */ +static char *data_realloc(struct printk_ringbuffer *rb, + struct prb_data_ring *data_ring, unsigned int size, + struct prb_data_blk_lpos *blk_lpos, unsigned long id) +{ + struct prb_data_block *blk; + unsigned long head_lpos; + unsigned long next_lpos; + bool wrapped; + + /* Reallocation only works if @blk_lpos is the newest data block. */ + head_lpos = atomic_long_read(&data_ring->head_lpos); + if (head_lpos != blk_lpos->next) + return NULL; + + /* Keep track if @blk_lpos was a wrapping data block. */ + wrapped = (DATA_WRAPS(data_ring, blk_lpos->begin) != DATA_WRAPS(data_ring, blk_lpos->next)); + + size = to_blk_size(size); + + next_lpos = get_next_lpos(data_ring, blk_lpos->begin, size); + + /* If the data block does not increase, there is nothing to do. */ + if (head_lpos - next_lpos < DATA_SIZE(data_ring)) { + blk = to_block(data_ring, blk_lpos->begin); + return &blk->data[0]; + } + + if (!data_push_tail(rb, data_ring, next_lpos - DATA_SIZE(data_ring))) + return NULL; + + /* The memory barrier involvement is the same as data_alloc:A. */ + if (!atomic_long_try_cmpxchg(&data_ring->head_lpos, &head_lpos, + next_lpos)) { /* LMM(data_realloc:A) */ + return NULL; + } + + blk = to_block(data_ring, blk_lpos->begin); + + if (DATA_WRAPS(data_ring, blk_lpos->begin) != DATA_WRAPS(data_ring, next_lpos)) { + struct prb_data_block *old_blk = blk; + + /* Wrapping data blocks store their data at the beginning. */ + blk = to_block(data_ring, 0); + + /* + * Store the ID on the wrapped block for consistency. + * The printk_ringbuffer does not actually use it. + */ + blk->id = id; + + if (!wrapped) { + /* + * Since the allocated space is now in the newly + * created wrapping data block, copy the content + * from the old data block. + */ + memcpy(&blk->data[0], &old_blk->data[0], + (blk_lpos->next - blk_lpos->begin) - sizeof(blk->id)); + } + } + + blk_lpos->next = next_lpos; + + return &blk->data[0]; +} + +/* Return the number of bytes used by a data block. */ +static unsigned int space_used(struct prb_data_ring *data_ring, + struct prb_data_blk_lpos *blk_lpos) +{ + /* Data-less blocks take no space. */ + if (BLK_DATALESS(blk_lpos)) + return 0; + + if (DATA_WRAPS(data_ring, blk_lpos->begin) == DATA_WRAPS(data_ring, blk_lpos->next)) { + /* Data block does not wrap. */ + return (DATA_INDEX(data_ring, blk_lpos->next) - + DATA_INDEX(data_ring, blk_lpos->begin)); + } + + /* + * For wrapping data blocks, the trailing (wasted) space is + * also counted. + */ + return (DATA_INDEX(data_ring, blk_lpos->next) + + DATA_SIZE(data_ring) - DATA_INDEX(data_ring, blk_lpos->begin)); +} + +/* + * Given @blk_lpos, return a pointer to the writer data from the data block + * and calculate the size of the data part. A NULL pointer is returned if + * @blk_lpos specifies values that could never be legal. + * + * This function (used by readers) performs strict validation on the lpos + * values to possibly detect bugs in the writer code. A WARN_ON_ONCE() is + * triggered if an internal error is detected. + */ +static const char *get_data(struct prb_data_ring *data_ring, + struct prb_data_blk_lpos *blk_lpos, + unsigned int *data_size) +{ + struct prb_data_block *db; + + /* Data-less data block description. */ + if (BLK_DATALESS(blk_lpos)) { + if (blk_lpos->begin == NO_LPOS && blk_lpos->next == NO_LPOS) { + *data_size = 0; + return ""; + } + return NULL; + } + + /* Regular data block: @begin less than @next and in same wrap. */ + if (DATA_WRAPS(data_ring, blk_lpos->begin) == DATA_WRAPS(data_ring, blk_lpos->next) && + blk_lpos->begin < blk_lpos->next) { + db = to_block(data_ring, blk_lpos->begin); + *data_size = blk_lpos->next - blk_lpos->begin; + + /* Wrapping data block: @begin is one wrap behind @next. */ + } else if (DATA_WRAPS(data_ring, blk_lpos->begin + DATA_SIZE(data_ring)) == + DATA_WRAPS(data_ring, blk_lpos->next)) { + db = to_block(data_ring, 0); + *data_size = DATA_INDEX(data_ring, blk_lpos->next); + + /* Illegal block description. */ + } else { + WARN_ON_ONCE(1); + return NULL; + } + + /* A valid data block will always be aligned to the ID size. */ + if (WARN_ON_ONCE(blk_lpos->begin != ALIGN(blk_lpos->begin, sizeof(db->id))) || + WARN_ON_ONCE(blk_lpos->next != ALIGN(blk_lpos->next, sizeof(db->id)))) { + return NULL; + } + + /* A valid data block will always have at least an ID. */ + if (WARN_ON_ONCE(*data_size < sizeof(db->id))) + return NULL; + + /* Subtract block ID space from size to reflect data size. */ + *data_size -= sizeof(db->id); + + return &db->data[0]; +} + +/* + * Attempt to transition the newest descriptor from committed back to reserved + * so that the record can be modified by a writer again. This is only possible + * if the descriptor is not yet finalized and the provided @caller_id matches. + */ +static struct prb_desc *desc_reopen_last(struct prb_desc_ring *desc_ring, + u32 caller_id, unsigned long *id_out) +{ + unsigned long prev_state_val; + enum desc_state d_state; + struct prb_desc desc; + struct prb_desc *d; + unsigned long id; + u32 cid; + + id = atomic_long_read(&desc_ring->head_id); + + /* + * To reduce unnecessarily reopening, first check if the descriptor + * state and caller ID are correct. + */ + d_state = desc_read(desc_ring, id, &desc, NULL, &cid); + if (d_state != desc_committed || cid != caller_id) + return NULL; + + d = to_desc(desc_ring, id); + + prev_state_val = DESC_SV(id, desc_committed); + + /* + * Guarantee the reserved state is stored before reading any + * record data. A full memory barrier is needed because @state_var + * modification is followed by reading. This pairs with _prb_commit:B. + * + * Memory barrier involvement: + * + * If desc_reopen_last:A reads from _prb_commit:B, then + * prb_reserve_in_last:A reads from _prb_commit:A. + * + * Relies on: + * + * WMB from _prb_commit:A to _prb_commit:B + * matching + * MB If desc_reopen_last:A to prb_reserve_in_last:A + */ + if (!atomic_long_try_cmpxchg(&d->state_var, &prev_state_val, + DESC_SV(id, desc_reserved))) { /* LMM(desc_reopen_last:A) */ + return NULL; + } + + *id_out = id; + return d; +} + +/** + * prb_reserve_in_last() - Re-reserve and extend the space in the ringbuffer + * used by the newest record. + * + * @e: The entry structure to setup. + * @rb: The ringbuffer to re-reserve and extend data in. + * @r: The record structure to allocate buffers for. + * @caller_id: The caller ID of the caller (reserving writer). + * @max_size: Fail if the extended size would be greater than this. + * + * This is the public function available to writers to re-reserve and extend + * data. + * + * The writer specifies the text size to extend (not the new total size) by + * setting the @text_buf_size field of @r. To ensure proper initialization + * of @r, prb_rec_init_wr() should be used. + * + * This function will fail if @caller_id does not match the caller ID of the + * newest record. In that case the caller must reserve new data using + * prb_reserve(). + * + * Context: Any context. Disables local interrupts on success. + * Return: true if text data could be extended, otherwise false. + * + * On success: + * + * - @r->text_buf points to the beginning of the entire text buffer. + * + * - @r->text_buf_size is set to the new total size of the buffer. + * + * - @r->info is not touched so that @r->info->text_len could be used + * to append the text. + * + * - prb_record_text_space() can be used on @e to query the new + * actually used space. + * + * Important: All @r->info fields will already be set with the current values + * for the record. I.e. @r->info->text_len will be less than + * @text_buf_size. Writers can use @r->info->text_len to know + * where concatenation begins and writers should update + * @r->info->text_len after concatenating. + */ +bool prb_reserve_in_last(struct prb_reserved_entry *e, struct printk_ringbuffer *rb, + struct printk_record *r, u32 caller_id, unsigned int max_size) +{ + struct prb_desc_ring *desc_ring = &rb->desc_ring; + struct printk_info *info; + unsigned int data_size; + struct prb_desc *d; + unsigned long id; + + local_irq_save(e->irqflags); + + /* Transition the newest descriptor back to the reserved state. */ + d = desc_reopen_last(desc_ring, caller_id, &id); + if (!d) { + local_irq_restore(e->irqflags); + goto fail_reopen; + } + + /* Now the writer has exclusive access: LMM(prb_reserve_in_last:A) */ + + info = to_info(desc_ring, id); + + /* + * Set the @e fields here so that prb_commit() can be used if + * anything fails from now on. + */ + e->rb = rb; + e->id = id; + + /* + * desc_reopen_last() checked the caller_id, but there was no + * exclusive access at that point. The descriptor may have + * changed since then. + */ + if (caller_id != info->caller_id) + goto fail; + + if (BLK_DATALESS(&d->text_blk_lpos)) { + if (WARN_ON_ONCE(info->text_len != 0)) { + pr_warn_once("wrong text_len value (%hu, expecting 0)\n", + info->text_len); + info->text_len = 0; + } + + if (!data_check_size(&rb->text_data_ring, r->text_buf_size)) + goto fail; + + if (r->text_buf_size > max_size) + goto fail; + + r->text_buf = data_alloc(rb, &rb->text_data_ring, r->text_buf_size, + &d->text_blk_lpos, id); + } else { + if (!get_data(&rb->text_data_ring, &d->text_blk_lpos, &data_size)) + goto fail; + + /* + * Increase the buffer size to include the original size. If + * the meta data (@text_len) is not sane, use the full data + * block size. + */ + if (WARN_ON_ONCE(info->text_len > data_size)) { + pr_warn_once("wrong text_len value (%hu, expecting <=%u)\n", + info->text_len, data_size); + info->text_len = data_size; + } + r->text_buf_size += info->text_len; + + if (!data_check_size(&rb->text_data_ring, r->text_buf_size)) + goto fail; + + if (r->text_buf_size > max_size) + goto fail; + + r->text_buf = data_realloc(rb, &rb->text_data_ring, r->text_buf_size, + &d->text_blk_lpos, id); + } + if (r->text_buf_size && !r->text_buf) + goto fail; + + r->info = info; + + e->text_space = space_used(&rb->text_data_ring, &d->text_blk_lpos); + + return true; +fail: + prb_commit(e); + /* prb_commit() re-enabled interrupts. */ +fail_reopen: + /* Make it clear to the caller that the re-reserve failed. */ + memset(r, 0, sizeof(*r)); + return false; +} + +/* + * Attempt to finalize a specified descriptor. If this fails, the descriptor + * is either already final or it will finalize itself when the writer commits. + */ +static void desc_make_final(struct prb_desc_ring *desc_ring, unsigned long id) +{ + unsigned long prev_state_val = DESC_SV(id, desc_committed); + struct prb_desc *d = to_desc(desc_ring, id); + + atomic_long_cmpxchg_relaxed(&d->state_var, prev_state_val, + DESC_SV(id, desc_finalized)); /* LMM(desc_make_final:A) */ +} + +/** + * prb_reserve() - Reserve space in the ringbuffer. + * + * @e: The entry structure to setup. + * @rb: The ringbuffer to reserve data in. + * @r: The record structure to allocate buffers for. + * + * This is the public function available to writers to reserve data. + * + * The writer specifies the text size to reserve by setting the + * @text_buf_size field of @r. To ensure proper initialization of @r, + * prb_rec_init_wr() should be used. + * + * Context: Any context. Disables local interrupts on success. + * Return: true if at least text data could be allocated, otherwise false. + * + * On success, the fields @info and @text_buf of @r will be set by this + * function and should be filled in by the writer before committing. Also + * on success, prb_record_text_space() can be used on @e to query the actual + * space used for the text data block. + * + * Important: @info->text_len needs to be set correctly by the writer in + * order for data to be readable and/or extended. Its value + * is initialized to 0. + */ +bool prb_reserve(struct prb_reserved_entry *e, struct printk_ringbuffer *rb, + struct printk_record *r) +{ + struct prb_desc_ring *desc_ring = &rb->desc_ring; + struct printk_info *info; + struct prb_desc *d; + unsigned long id; + u64 seq; + + if (!data_check_size(&rb->text_data_ring, r->text_buf_size)) + goto fail; + + /* + * Descriptors in the reserved state act as blockers to all further + * reservations once the desc_ring has fully wrapped. Disable + * interrupts during the reserve/commit window in order to minimize + * the likelihood of this happening. + */ + local_irq_save(e->irqflags); + + if (!desc_reserve(rb, &id)) { + /* Descriptor reservation failures are tracked. */ + atomic_long_inc(&rb->fail); + local_irq_restore(e->irqflags); + goto fail; + } + + d = to_desc(desc_ring, id); + info = to_info(desc_ring, id); + + /* + * All @info fields (except @seq) are cleared and must be filled in + * by the writer. Save @seq before clearing because it is used to + * determine the new sequence number. + */ + seq = info->seq; + memset(info, 0, sizeof(*info)); + + /* + * Set the @e fields here so that prb_commit() can be used if + * text data allocation fails. + */ + e->rb = rb; + e->id = id; + + /* + * Initialize the sequence number if it has "never been set". + * Otherwise just increment it by a full wrap. + * + * @seq is considered "never been set" if it has a value of 0, + * _except_ for @infos[0], which was specially setup by the ringbuffer + * initializer and therefore is always considered as set. + * + * See the "Bootstrap" comment block in printk_ringbuffer.h for + * details about how the initializer bootstraps the descriptors. + */ + if (seq == 0 && DESC_INDEX(desc_ring, id) != 0) + info->seq = DESC_INDEX(desc_ring, id); + else + info->seq = seq + DESCS_COUNT(desc_ring); + + /* + * New data is about to be reserved. Once that happens, previous + * descriptors are no longer able to be extended. Finalize the + * previous descriptor now so that it can be made available to + * readers. (For seq==0 there is no previous descriptor.) + */ + if (info->seq > 0) + desc_make_final(desc_ring, DESC_ID(id - 1)); + + r->text_buf = data_alloc(rb, &rb->text_data_ring, r->text_buf_size, + &d->text_blk_lpos, id); + /* If text data allocation fails, a data-less record is committed. */ + if (r->text_buf_size && !r->text_buf) { + prb_commit(e); + /* prb_commit() re-enabled interrupts. */ + goto fail; + } + + r->info = info; + + /* Record full text space used by record. */ + e->text_space = space_used(&rb->text_data_ring, &d->text_blk_lpos); + + return true; +fail: + /* Make it clear to the caller that the reserve failed. */ + memset(r, 0, sizeof(*r)); + return false; +} + +/* Commit the data (possibly finalizing it) and restore interrupts. */ +static void _prb_commit(struct prb_reserved_entry *e, unsigned long state_val) +{ + struct prb_desc_ring *desc_ring = &e->rb->desc_ring; + struct prb_desc *d = to_desc(desc_ring, e->id); + unsigned long prev_state_val = DESC_SV(e->id, desc_reserved); + + /* Now the writer has finished all writing: LMM(_prb_commit:A) */ + + /* + * Set the descriptor as committed. See "ABA Issues" about why + * cmpxchg() instead of set() is used. + * + * 1 Guarantee all record data is stored before the descriptor state + * is stored as committed. A write memory barrier is sufficient + * for this. This pairs with desc_read:B and desc_reopen_last:A. + * + * 2. Guarantee the descriptor state is stored as committed before + * re-checking the head ID in order to possibly finalize this + * descriptor. This pairs with desc_reserve:D. + * + * Memory barrier involvement: + * + * If prb_commit:A reads from desc_reserve:D, then + * desc_make_final:A reads from _prb_commit:B. + * + * Relies on: + * + * MB _prb_commit:B to prb_commit:A + * matching + * MB desc_reserve:D to desc_make_final:A + */ + if (!atomic_long_try_cmpxchg(&d->state_var, &prev_state_val, + DESC_SV(e->id, state_val))) { /* LMM(_prb_commit:B) */ + WARN_ON_ONCE(1); + } + + /* Restore interrupts, the reserve/commit window is finished. */ + local_irq_restore(e->irqflags); +} + +/** + * prb_commit() - Commit (previously reserved) data to the ringbuffer. + * + * @e: The entry containing the reserved data information. + * + * This is the public function available to writers to commit data. + * + * Note that the data is not yet available to readers until it is finalized. + * Finalizing happens automatically when space for the next record is + * reserved. + * + * See prb_final_commit() for a version of this function that finalizes + * immediately. + * + * Context: Any context. Enables local interrupts. + */ +void prb_commit(struct prb_reserved_entry *e) +{ + struct prb_desc_ring *desc_ring = &e->rb->desc_ring; + unsigned long head_id; + + _prb_commit(e, desc_committed); + + /* + * If this descriptor is no longer the head (i.e. a new record has + * been allocated), extending the data for this record is no longer + * allowed and therefore it must be finalized. + */ + head_id = atomic_long_read(&desc_ring->head_id); /* LMM(prb_commit:A) */ + if (head_id != e->id) + desc_make_final(desc_ring, e->id); +} + +/** + * prb_final_commit() - Commit and finalize (previously reserved) data to + * the ringbuffer. + * + * @e: The entry containing the reserved data information. + * + * This is the public function available to writers to commit+finalize data. + * + * By finalizing, the data is made immediately available to readers. + * + * This function should only be used if there are no intentions of extending + * this data using prb_reserve_in_last(). + * + * Context: Any context. Enables local interrupts. + */ +void prb_final_commit(struct prb_reserved_entry *e) +{ + _prb_commit(e, desc_finalized); +} + +/* + * Count the number of lines in provided text. All text has at least 1 line + * (even if @text_size is 0). Each '\n' processed is counted as an additional + * line. + */ +static unsigned int count_lines(const char *text, unsigned int text_size) +{ + unsigned int next_size = text_size; + unsigned int line_count = 1; + const char *next = text; + + while (next_size) { + next = memchr(next, '\n', next_size); + if (!next) + break; + line_count++; + next++; + next_size = text_size - (next - text); + } + + return line_count; +} + +/* + * Given @blk_lpos, copy an expected @len of data into the provided buffer. + * If @line_count is provided, count the number of lines in the data. + * + * This function (used by readers) performs strict validation on the data + * size to possibly detect bugs in the writer code. A WARN_ON_ONCE() is + * triggered if an internal error is detected. + */ +static bool copy_data(struct prb_data_ring *data_ring, + struct prb_data_blk_lpos *blk_lpos, u16 len, char *buf, + unsigned int buf_size, unsigned int *line_count) +{ + unsigned int data_size; + const char *data; + + /* Caller might not want any data. */ + if ((!buf || !buf_size) && !line_count) + return true; + + data = get_data(data_ring, blk_lpos, &data_size); + if (!data) + return false; + + /* + * Actual cannot be less than expected. It can be more than expected + * because of the trailing alignment padding. + * + * Note that invalid @len values can occur because the caller loads + * the value during an allowed data race. + */ + if (data_size < (unsigned int)len) + return false; + + /* Caller interested in the line count? */ + if (line_count) + *line_count = count_lines(data, data_size); + + /* Caller interested in the data content? */ + if (!buf || !buf_size) + return true; + + data_size = min_t(u16, buf_size, len); + + memcpy(&buf[0], data, data_size); /* LMM(copy_data:A) */ + return true; +} + +/* + * This is an extended version of desc_read(). It gets a copy of a specified + * descriptor. However, it also verifies that the record is finalized and has + * the sequence number @seq. On success, 0 is returned. + * + * Error return values: + * -EINVAL: A finalized record with sequence number @seq does not exist. + * -ENOENT: A finalized record with sequence number @seq exists, but its data + * is not available. This is a valid record, so readers should + * continue with the next record. + */ +static int desc_read_finalized_seq(struct prb_desc_ring *desc_ring, + unsigned long id, u64 seq, + struct prb_desc *desc_out) +{ + struct prb_data_blk_lpos *blk_lpos = &desc_out->text_blk_lpos; + enum desc_state d_state; + u64 s; + + d_state = desc_read(desc_ring, id, desc_out, &s, NULL); + + /* + * An unexpected @id (desc_miss) or @seq mismatch means the record + * does not exist. A descriptor in the reserved or committed state + * means the record does not yet exist for the reader. + */ + if (d_state == desc_miss || + d_state == desc_reserved || + d_state == desc_committed || + s != seq) { + return -EINVAL; + } + + /* + * A descriptor in the reusable state may no longer have its data + * available; report it as existing but with lost data. Or the record + * may actually be a record with lost data. + */ + if (d_state == desc_reusable || + (blk_lpos->begin == FAILED_LPOS && blk_lpos->next == FAILED_LPOS)) { + return -ENOENT; + } + + return 0; +} + +/* + * Copy the ringbuffer data from the record with @seq to the provided + * @r buffer. On success, 0 is returned. + * + * See desc_read_finalized_seq() for error return values. + */ +static int prb_read(struct printk_ringbuffer *rb, u64 seq, + struct printk_record *r, unsigned int *line_count) +{ + struct prb_desc_ring *desc_ring = &rb->desc_ring; + struct printk_info *info = to_info(desc_ring, seq); + struct prb_desc *rdesc = to_desc(desc_ring, seq); + atomic_long_t *state_var = &rdesc->state_var; + struct prb_desc desc; + unsigned long id; + int err; + + /* Extract the ID, used to specify the descriptor to read. */ + id = DESC_ID(atomic_long_read(state_var)); + + /* Get a local copy of the correct descriptor (if available). */ + err = desc_read_finalized_seq(desc_ring, id, seq, &desc); + + /* + * If @r is NULL, the caller is only interested in the availability + * of the record. + */ + if (err || !r) + return err; + + /* If requested, copy meta data. */ + if (r->info) + memcpy(r->info, info, sizeof(*(r->info))); + + /* Copy text data. If it fails, this is a data-less record. */ + if (!copy_data(&rb->text_data_ring, &desc.text_blk_lpos, info->text_len, + r->text_buf, r->text_buf_size, line_count)) { + return -ENOENT; + } + + /* Ensure the record is still finalized and has the same @seq. */ + return desc_read_finalized_seq(desc_ring, id, seq, &desc); +} + +/* Get the sequence number of the tail descriptor. */ +static u64 prb_first_seq(struct printk_ringbuffer *rb) +{ + struct prb_desc_ring *desc_ring = &rb->desc_ring; + enum desc_state d_state; + struct prb_desc desc; + unsigned long id; + u64 seq; + + for (;;) { + id = atomic_long_read(&rb->desc_ring.tail_id); /* LMM(prb_first_seq:A) */ + + d_state = desc_read(desc_ring, id, &desc, &seq, NULL); /* LMM(prb_first_seq:B) */ + + /* + * This loop will not be infinite because the tail is + * _always_ in the finalized or reusable state. + */ + if (d_state == desc_finalized || d_state == desc_reusable) + break; + + /* + * Guarantee the last state load from desc_read() is before + * reloading @tail_id in order to see a new tail in the case + * that the descriptor has been recycled. This pairs with + * desc_reserve:D. + * + * Memory barrier involvement: + * + * If prb_first_seq:B reads from desc_reserve:F, then + * prb_first_seq:A reads from desc_push_tail:B. + * + * Relies on: + * + * MB from desc_push_tail:B to desc_reserve:F + * matching + * RMB prb_first_seq:B to prb_first_seq:A + */ + smp_rmb(); /* LMM(prb_first_seq:C) */ + } + + return seq; +} + +/* + * Non-blocking read of a record. Updates @seq to the last finalized record + * (which may have no data available). + * + * See the description of prb_read_valid() and prb_read_valid_info() + * for details. + */ +static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq, + struct printk_record *r, unsigned int *line_count) +{ + u64 tail_seq; + int err; + + while ((err = prb_read(rb, *seq, r, line_count))) { + tail_seq = prb_first_seq(rb); + + if (*seq < tail_seq) { + /* + * Behind the tail. Catch up and try again. This + * can happen for -ENOENT and -EINVAL cases. + */ + *seq = tail_seq; + + } else if (err == -ENOENT) { + /* Record exists, but no data available. Skip. */ + (*seq)++; + + } else { + /* Non-existent/non-finalized record. Must stop. */ + return false; + } + } + + return true; +} + +/** + * prb_read_valid() - Non-blocking read of a requested record or (if gone) + * the next available record. + * + * @rb: The ringbuffer to read from. + * @seq: The sequence number of the record to read. + * @r: A record data buffer to store the read record to. + * + * This is the public function available to readers to read a record. + * + * The reader provides the @info and @text_buf buffers of @r to be + * filled in. Any of the buffer pointers can be set to NULL if the reader + * is not interested in that data. To ensure proper initialization of @r, + * prb_rec_init_rd() should be used. + * + * Context: Any context. + * Return: true if a record was read, otherwise false. + * + * On success, the reader must check r->info.seq to see which record was + * actually read. This allows the reader to detect dropped records. + * + * Failure means @seq refers to a not yet written record. + */ +bool prb_read_valid(struct printk_ringbuffer *rb, u64 seq, + struct printk_record *r) +{ + return _prb_read_valid(rb, &seq, r, NULL); +} + +/** + * prb_read_valid_info() - Non-blocking read of meta data for a requested + * record or (if gone) the next available record. + * + * @rb: The ringbuffer to read from. + * @seq: The sequence number of the record to read. + * @info: A buffer to store the read record meta data to. + * @line_count: A buffer to store the number of lines in the record text. + * + * This is the public function available to readers to read only the + * meta data of a record. + * + * The reader provides the @info, @line_count buffers to be filled in. + * Either of the buffer pointers can be set to NULL if the reader is not + * interested in that data. + * + * Context: Any context. + * Return: true if a record's meta data was read, otherwise false. + * + * On success, the reader must check info->seq to see which record meta data + * was actually read. This allows the reader to detect dropped records. + * + * Failure means @seq refers to a not yet written record. + */ +bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq, + struct printk_info *info, unsigned int *line_count) +{ + struct printk_record r; + + prb_rec_init_rd(&r, info, NULL, 0); + + return _prb_read_valid(rb, &seq, &r, line_count); +} + +/** + * prb_first_valid_seq() - Get the sequence number of the oldest available + * record. + * + * @rb: The ringbuffer to get the sequence number from. + * + * This is the public function available to readers to see what the + * first/oldest valid sequence number is. + * + * This provides readers a starting point to begin iterating the ringbuffer. + * + * Context: Any context. + * Return: The sequence number of the first/oldest record or, if the + * ringbuffer is empty, 0 is returned. + */ +u64 prb_first_valid_seq(struct printk_ringbuffer *rb) +{ + u64 seq = 0; + + if (!_prb_read_valid(rb, &seq, NULL, NULL)) + return 0; + + return seq; +} + +/** + * prb_next_seq() - Get the sequence number after the last available record. + * + * @rb: The ringbuffer to get the sequence number from. + * + * This is the public function available to readers to see what the next + * newest sequence number available to readers will be. + * + * This provides readers a sequence number to jump to if all currently + * available records should be skipped. + * + * Context: Any context. + * Return: The sequence number of the next newest (not yet available) record + * for readers. + */ +u64 prb_next_seq(struct printk_ringbuffer *rb) +{ + u64 seq = 0; + + /* Search forward from the oldest descriptor. */ + while (_prb_read_valid(rb, &seq, NULL, NULL)) + seq++; + + return seq; +} + +/** + * prb_init() - Initialize a ringbuffer to use provided external buffers. + * + * @rb: The ringbuffer to initialize. + * @text_buf: The data buffer for text data. + * @textbits: The size of @text_buf as a power-of-2 value. + * @descs: The descriptor buffer for ringbuffer records. + * @descbits: The count of @descs items as a power-of-2 value. + * @infos: The printk_info buffer for ringbuffer records. + * + * This is the public function available to writers to setup a ringbuffer + * during runtime using provided buffers. + * + * This must match the initialization of DEFINE_PRINTKRB(). + * + * Context: Any context. + */ +void prb_init(struct printk_ringbuffer *rb, + char *text_buf, unsigned int textbits, + struct prb_desc *descs, unsigned int descbits, + struct printk_info *infos) +{ + memset(descs, 0, _DESCS_COUNT(descbits) * sizeof(descs[0])); + memset(infos, 0, _DESCS_COUNT(descbits) * sizeof(infos[0])); + + rb->desc_ring.count_bits = descbits; + rb->desc_ring.descs = descs; + rb->desc_ring.infos = infos; + atomic_long_set(&rb->desc_ring.head_id, DESC0_ID(descbits)); + atomic_long_set(&rb->desc_ring.tail_id, DESC0_ID(descbits)); + + rb->text_data_ring.size_bits = textbits; + rb->text_data_ring.data = text_buf; + atomic_long_set(&rb->text_data_ring.head_lpos, BLK0_LPOS(textbits)); + atomic_long_set(&rb->text_data_ring.tail_lpos, BLK0_LPOS(textbits)); + + atomic_long_set(&rb->fail, 0); + + atomic_long_set(&(descs[_DESCS_COUNT(descbits) - 1].state_var), DESC0_SV(descbits)); + descs[_DESCS_COUNT(descbits) - 1].text_blk_lpos.begin = FAILED_LPOS; + descs[_DESCS_COUNT(descbits) - 1].text_blk_lpos.next = FAILED_LPOS; + + infos[0].seq = -(u64)_DESCS_COUNT(descbits); + infos[_DESCS_COUNT(descbits) - 1].seq = 0; +} + +/** + * prb_record_text_space() - Query the full actual used ringbuffer space for + * the text data of a reserved entry. + * + * @e: The successfully reserved entry to query. + * + * This is the public function available to writers to see how much actual + * space is used in the ringbuffer to store the text data of the specified + * entry. + * + * This function is only valid if @e has been successfully reserved using + * prb_reserve(). + * + * Context: Any context. + * Return: The size in bytes used by the text data of the associated record. + */ +unsigned int prb_record_text_space(struct prb_reserved_entry *e) +{ + return e->text_space; +} diff --git a/kernel/printk/printk_ringbuffer.h b/kernel/printk/printk_ringbuffer.h new file mode 100644 index 000000000000..5dc9d022db07 --- /dev/null +++ b/kernel/printk/printk_ringbuffer.h @@ -0,0 +1,382 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _KERNEL_PRINTK_RINGBUFFER_H +#define _KERNEL_PRINTK_RINGBUFFER_H + +#include <linux/atomic.h> +#include <linux/dev_printk.h> + +/* + * Meta information about each stored message. + * + * All fields are set by the printk code except for @seq, which is + * set by the ringbuffer code. + */ +struct printk_info { + u64 seq; /* sequence number */ + u64 ts_nsec; /* timestamp in nanoseconds */ + u16 text_len; /* length of text message */ + u8 facility; /* syslog facility */ + u8 flags:5; /* internal record flags */ + u8 level:3; /* syslog level */ + u32 caller_id; /* thread id or processor id */ + + struct dev_printk_info dev_info; +}; + +/* + * A structure providing the buffers, used by writers and readers. + * + * Writers: + * Using prb_rec_init_wr(), a writer sets @text_buf_size before calling + * prb_reserve(). On success, prb_reserve() sets @info and @text_buf to + * buffers reserved for that writer. + * + * Readers: + * Using prb_rec_init_rd(), a reader sets all fields before calling + * prb_read_valid(). Note that the reader provides the @info and @text_buf, + * buffers. On success, the struct pointed to by @info will be filled and + * the char array pointed to by @text_buf will be filled with text data. + */ +struct printk_record { + struct printk_info *info; + char *text_buf; + unsigned int text_buf_size; +}; + +/* Specifies the logical position and span of a data block. */ +struct prb_data_blk_lpos { + unsigned long begin; + unsigned long next; +}; + +/* + * A descriptor: the complete meta-data for a record. + * + * @state_var: A bitwise combination of descriptor ID and descriptor state. + */ +struct prb_desc { + atomic_long_t state_var; + struct prb_data_blk_lpos text_blk_lpos; +}; + +/* A ringbuffer of "ID + data" elements. */ +struct prb_data_ring { + unsigned int size_bits; + char *data; + atomic_long_t head_lpos; + atomic_long_t tail_lpos; +}; + +/* A ringbuffer of "struct prb_desc" elements. */ +struct prb_desc_ring { + unsigned int count_bits; + struct prb_desc *descs; + struct printk_info *infos; + atomic_long_t head_id; + atomic_long_t tail_id; +}; + +/* + * The high level structure representing the printk ringbuffer. + * + * @fail: Count of failed prb_reserve() calls where not even a data-less + * record was created. + */ +struct printk_ringbuffer { + struct prb_desc_ring desc_ring; + struct prb_data_ring text_data_ring; + atomic_long_t fail; +}; + +/* + * Used by writers as a reserve/commit handle. + * + * @rb: Ringbuffer where the entry is reserved. + * @irqflags: Saved irq flags to restore on entry commit. + * @id: ID of the reserved descriptor. + * @text_space: Total occupied buffer space in the text data ring, including + * ID, alignment padding, and wrapping data blocks. + * + * This structure is an opaque handle for writers. Its contents are only + * to be used by the ringbuffer implementation. + */ +struct prb_reserved_entry { + struct printk_ringbuffer *rb; + unsigned long irqflags; + unsigned long id; + unsigned int text_space; +}; + +/* The possible responses of a descriptor state-query. */ +enum desc_state { + desc_miss = -1, /* ID mismatch (pseudo state) */ + desc_reserved = 0x0, /* reserved, in use by writer */ + desc_committed = 0x1, /* committed by writer, could get reopened */ + desc_finalized = 0x2, /* committed, no further modification allowed */ + desc_reusable = 0x3, /* free, not yet used by any writer */ +}; + +#define _DATA_SIZE(sz_bits) (1UL << (sz_bits)) +#define _DESCS_COUNT(ct_bits) (1U << (ct_bits)) +#define DESC_SV_BITS (sizeof(unsigned long) * 8) +#define DESC_FLAGS_SHIFT (DESC_SV_BITS - 2) +#define DESC_FLAGS_MASK (3UL << DESC_FLAGS_SHIFT) +#define DESC_STATE(sv) (3UL & (sv >> DESC_FLAGS_SHIFT)) +#define DESC_SV(id, state) (((unsigned long)state << DESC_FLAGS_SHIFT) | id) +#define DESC_ID_MASK (~DESC_FLAGS_MASK) +#define DESC_ID(sv) ((sv) & DESC_ID_MASK) +#define FAILED_LPOS 0x1 +#define NO_LPOS 0x3 + +#define FAILED_BLK_LPOS \ +{ \ + .begin = FAILED_LPOS, \ + .next = FAILED_LPOS, \ +} + +/* + * Descriptor Bootstrap + * + * The descriptor array is minimally initialized to allow immediate usage + * by readers and writers. The requirements that the descriptor array + * initialization must satisfy: + * + * Req1 + * The tail must point to an existing (committed or reusable) descriptor. + * This is required by the implementation of prb_first_seq(). + * + * Req2 + * Readers must see that the ringbuffer is initially empty. + * + * Req3 + * The first record reserved by a writer is assigned sequence number 0. + * + * To satisfy Req1, the tail initially points to a descriptor that is + * minimally initialized (having no data block, i.e. data-less with the + * data block's lpos @begin and @next values set to FAILED_LPOS). + * + * To satisfy Req2, the initial tail descriptor is initialized to the + * reusable state. Readers recognize reusable descriptors as existing + * records, but skip over them. + * + * To satisfy Req3, the last descriptor in the array is used as the initial + * head (and tail) descriptor. This allows the first record reserved by a + * writer (head + 1) to be the first descriptor in the array. (Only the first + * descriptor in the array could have a valid sequence number of 0.) + * + * The first time a descriptor is reserved, it is assigned a sequence number + * with the value of the array index. A "first time reserved" descriptor can + * be recognized because it has a sequence number of 0 but does not have an + * index of 0. (Only the first descriptor in the array could have a valid + * sequence number of 0.) After the first reservation, all future reservations + * (recycling) simply involve incrementing the sequence number by the array + * count. + * + * Hack #1 + * Only the first descriptor in the array is allowed to have the sequence + * number 0. In this case it is not possible to recognize if it is being + * reserved the first time (set to index value) or has been reserved + * previously (increment by the array count). This is handled by _always_ + * incrementing the sequence number by the array count when reserving the + * first descriptor in the array. In order to satisfy Req3, the sequence + * number of the first descriptor in the array is initialized to minus + * the array count. Then, upon the first reservation, it is incremented + * to 0, thus satisfying Req3. + * + * Hack #2 + * prb_first_seq() can be called at any time by readers to retrieve the + * sequence number of the tail descriptor. However, due to Req2 and Req3, + * initially there are no records to report the sequence number of + * (sequence numbers are u64 and there is nothing less than 0). To handle + * this, the sequence number of the initial tail descriptor is initialized + * to 0. Technically this is incorrect, because there is no record with + * sequence number 0 (yet) and the tail descriptor is not the first + * descriptor in the array. But it allows prb_read_valid() to correctly + * report the existence of a record for _any_ given sequence number at all + * times. Bootstrapping is complete when the tail is pushed the first + * time, thus finally pointing to the first descriptor reserved by a + * writer, which has the assigned sequence number 0. + */ + +/* + * Initiating Logical Value Overflows + * + * Both logical position (lpos) and ID values can be mapped to array indexes + * but may experience overflows during the lifetime of the system. To ensure + * that printk_ringbuffer can handle the overflows for these types, initial + * values are chosen that map to the correct initial array indexes, but will + * result in overflows soon. + * + * BLK0_LPOS + * The initial @head_lpos and @tail_lpos for data rings. It is at index + * 0 and the lpos value is such that it will overflow on the first wrap. + * + * DESC0_ID + * The initial @head_id and @tail_id for the desc ring. It is at the last + * index of the descriptor array (see Req3 above) and the ID value is such + * that it will overflow on the second wrap. + */ +#define BLK0_LPOS(sz_bits) (-(_DATA_SIZE(sz_bits))) +#define DESC0_ID(ct_bits) DESC_ID(-(_DESCS_COUNT(ct_bits) + 1)) +#define DESC0_SV(ct_bits) DESC_SV(DESC0_ID(ct_bits), desc_reusable) + +/* + * Define a ringbuffer with an external text data buffer. The same as + * DEFINE_PRINTKRB() but requires specifying an external buffer for the + * text data. + * + * Note: The specified external buffer must be of the size: + * 2 ^ (descbits + avgtextbits) + */ +#define _DEFINE_PRINTKRB(name, descbits, avgtextbits, text_buf) \ +static struct prb_desc _##name##_descs[_DESCS_COUNT(descbits)] = { \ + /* the initial head and tail */ \ + [_DESCS_COUNT(descbits) - 1] = { \ + /* reusable */ \ + .state_var = ATOMIC_INIT(DESC0_SV(descbits)), \ + /* no associated data block */ \ + .text_blk_lpos = FAILED_BLK_LPOS, \ + }, \ +}; \ +static struct printk_info _##name##_infos[_DESCS_COUNT(descbits)] = { \ + /* this will be the first record reserved by a writer */ \ + [0] = { \ + /* will be incremented to 0 on the first reservation */ \ + .seq = -(u64)_DESCS_COUNT(descbits), \ + }, \ + /* the initial head and tail */ \ + [_DESCS_COUNT(descbits) - 1] = { \ + /* reports the first seq value during the bootstrap phase */ \ + .seq = 0, \ + }, \ +}; \ +static struct printk_ringbuffer name = { \ + .desc_ring = { \ + .count_bits = descbits, \ + .descs = &_##name##_descs[0], \ + .infos = &_##name##_infos[0], \ + .head_id = ATOMIC_INIT(DESC0_ID(descbits)), \ + .tail_id = ATOMIC_INIT(DESC0_ID(descbits)), \ + }, \ + .text_data_ring = { \ + .size_bits = (avgtextbits) + (descbits), \ + .data = text_buf, \ + .head_lpos = ATOMIC_LONG_INIT(BLK0_LPOS((avgtextbits) + (descbits))), \ + .tail_lpos = ATOMIC_LONG_INIT(BLK0_LPOS((avgtextbits) + (descbits))), \ + }, \ + .fail = ATOMIC_LONG_INIT(0), \ +} + +/** + * DEFINE_PRINTKRB() - Define a ringbuffer. + * + * @name: The name of the ringbuffer variable. + * @descbits: The number of descriptors as a power-of-2 value. + * @avgtextbits: The average text data size per record as a power-of-2 value. + * + * This is a macro for defining a ringbuffer and all internal structures + * such that it is ready for immediate use. See _DEFINE_PRINTKRB() for a + * variant where the text data buffer can be specified externally. + */ +#define DEFINE_PRINTKRB(name, descbits, avgtextbits) \ +static char _##name##_text[1U << ((avgtextbits) + (descbits))] \ + __aligned(__alignof__(unsigned long)); \ +_DEFINE_PRINTKRB(name, descbits, avgtextbits, &_##name##_text[0]) + +/* Writer Interface */ + +/** + * prb_rec_init_wd() - Initialize a buffer for writing records. + * + * @r: The record to initialize. + * @text_buf_size: The needed text buffer size. + */ +static inline void prb_rec_init_wr(struct printk_record *r, + unsigned int text_buf_size) +{ + r->info = NULL; + r->text_buf = NULL; + r->text_buf_size = text_buf_size; +} + +bool prb_reserve(struct prb_reserved_entry *e, struct printk_ringbuffer *rb, + struct printk_record *r); +bool prb_reserve_in_last(struct prb_reserved_entry *e, struct printk_ringbuffer *rb, + struct printk_record *r, u32 caller_id, unsigned int max_size); +void prb_commit(struct prb_reserved_entry *e); +void prb_final_commit(struct prb_reserved_entry *e); + +void prb_init(struct printk_ringbuffer *rb, + char *text_buf, unsigned int text_buf_size, + struct prb_desc *descs, unsigned int descs_count_bits, + struct printk_info *infos); +unsigned int prb_record_text_space(struct prb_reserved_entry *e); + +/* Reader Interface */ + +/** + * prb_rec_init_rd() - Initialize a buffer for reading records. + * + * @r: The record to initialize. + * @info: A buffer to store record meta-data. + * @text_buf: A buffer to store text data. + * @text_buf_size: The size of @text_buf. + * + * Initialize all the fields that a reader is interested in. All arguments + * (except @r) are optional. Only record data for arguments that are + * non-NULL or non-zero will be read. + */ +static inline void prb_rec_init_rd(struct printk_record *r, + struct printk_info *info, + char *text_buf, unsigned int text_buf_size) +{ + r->info = info; + r->text_buf = text_buf; + r->text_buf_size = text_buf_size; +} + +/** + * prb_for_each_record() - Iterate over the records of a ringbuffer. + * + * @from: The sequence number to begin with. + * @rb: The ringbuffer to iterate over. + * @s: A u64 to store the sequence number on each iteration. + * @r: A printk_record to store the record on each iteration. + * + * This is a macro for conveniently iterating over a ringbuffer. + * Note that @s may not be the sequence number of the record on each + * iteration. For the sequence number, @r->info->seq should be checked. + * + * Context: Any context. + */ +#define prb_for_each_record(from, rb, s, r) \ +for ((s) = from; prb_read_valid(rb, s, r); (s) = (r)->info->seq + 1) + +/** + * prb_for_each_info() - Iterate over the meta data of a ringbuffer. + * + * @from: The sequence number to begin with. + * @rb: The ringbuffer to iterate over. + * @s: A u64 to store the sequence number on each iteration. + * @i: A printk_info to store the record meta data on each iteration. + * @lc: An unsigned int to store the text line count of each record. + * + * This is a macro for conveniently iterating over a ringbuffer. + * Note that @s may not be the sequence number of the record on each + * iteration. For the sequence number, @r->info->seq should be checked. + * + * Context: Any context. + */ +#define prb_for_each_info(from, rb, s, i, lc) \ +for ((s) = from; prb_read_valid_info(rb, s, i, lc); (s) = (i)->seq + 1) + +bool prb_read_valid(struct printk_ringbuffer *rb, u64 seq, + struct printk_record *r); +bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq, + struct printk_info *info, unsigned int *line_count); + +u64 prb_first_valid_seq(struct printk_ringbuffer *rb); +u64 prb_next_seq(struct printk_ringbuffer *rb); + +#endif /* _KERNEL_PRINTK_RINGBUFFER_H */ diff --git a/kernel/printk/printk_safe.c b/kernel/printk/printk_safe.c index 50aeae770434..5dbc40160990 100644 --- a/kernel/printk/printk_safe.c +++ b/kernel/printk/printk_safe.c @@ -375,7 +375,7 @@ __printf(1, 0) int vprintk_func(const char *fmt, va_list args) raw_spin_trylock(&logbuf_lock)) { int len; - len = vprintk_store(0, LOGLEVEL_DEFAULT, NULL, 0, fmt, args); + len = vprintk_store(0, LOGLEVEL_DEFAULT, NULL, fmt, args); raw_spin_unlock(&logbuf_lock); defer_console_output(); return len; diff --git a/scripts/gdb/linux/dmesg.py b/scripts/gdb/linux/dmesg.py index 2fa7bb83885f..a92c55bd8de5 100644 --- a/scripts/gdb/linux/dmesg.py +++ b/scripts/gdb/linux/dmesg.py @@ -16,8 +16,13 @@ import sys from linux import utils -printk_log_type = utils.CachedType("struct printk_log") - +printk_info_type = utils.CachedType("struct printk_info") +prb_data_blk_lpos_type = utils.CachedType("struct prb_data_blk_lpos") +prb_desc_type = utils.CachedType("struct prb_desc") +prb_desc_ring_type = utils.CachedType("struct prb_desc_ring") +prb_data_ring_type = utils.CachedType("struct prb_data_ring") +printk_ringbuffer_type = utils.CachedType("struct printk_ringbuffer") +atomic_long_type = utils.CachedType("atomic_long_t") class LxDmesg(gdb.Command): """Print Linux kernel log buffer.""" @@ -26,44 +31,110 @@ class LxDmesg(gdb.Command): super(LxDmesg, self).__init__("lx-dmesg", gdb.COMMAND_DATA) def invoke(self, arg, from_tty): - log_buf_addr = int(str(gdb.parse_and_eval( - "(void *)'printk.c'::log_buf")).split()[0], 16) - log_first_idx = int(gdb.parse_and_eval("'printk.c'::log_first_idx")) - log_next_idx = int(gdb.parse_and_eval("'printk.c'::log_next_idx")) - log_buf_len = int(gdb.parse_and_eval("'printk.c'::log_buf_len")) - inf = gdb.inferiors()[0] - start = log_buf_addr + log_first_idx - if log_first_idx < log_next_idx: - log_buf_2nd_half = -1 - length = log_next_idx - log_first_idx - log_buf = utils.read_memoryview(inf, start, length).tobytes() - else: - log_buf_2nd_half = log_buf_len - log_first_idx - a = utils.read_memoryview(inf, start, log_buf_2nd_half) - b = utils.read_memoryview(inf, log_buf_addr, log_next_idx) - log_buf = a.tobytes() + b.tobytes() - - length_offset = printk_log_type.get_type()['len'].bitpos // 8 - text_len_offset = printk_log_type.get_type()['text_len'].bitpos // 8 - time_stamp_offset = printk_log_type.get_type()['ts_nsec'].bitpos // 8 - text_offset = printk_log_type.get_type().sizeof - - pos = 0 - while pos < log_buf.__len__(): - length = utils.read_u16(log_buf, pos + length_offset) - if length == 0: - if log_buf_2nd_half == -1: - gdb.write("Corrupted log buffer!\n") + + # read in prb structure + prb_addr = int(str(gdb.parse_and_eval("(void *)'printk.c'::prb")).split()[0], 16) + sz = printk_ringbuffer_type.get_type().sizeof + prb = utils.read_memoryview(inf, prb_addr, sz).tobytes() + + # read in descriptor ring structure + off = printk_ringbuffer_type.get_type()['desc_ring'].bitpos // 8 + addr = prb_addr + off + sz = prb_desc_ring_type.get_type().sizeof + desc_ring = utils.read_memoryview(inf, addr, sz).tobytes() + + # read in descriptor array + off = prb_desc_ring_type.get_type()['count_bits'].bitpos // 8 + desc_ring_count = 1 << utils.read_u32(desc_ring, off) + desc_sz = prb_desc_type.get_type().sizeof + off = prb_desc_ring_type.get_type()['descs'].bitpos // 8 + addr = utils.read_ulong(desc_ring, off) + descs = utils.read_memoryview(inf, addr, desc_sz * desc_ring_count).tobytes() + + # read in info array + info_sz = printk_info_type.get_type().sizeof + off = prb_desc_ring_type.get_type()['infos'].bitpos // 8 + addr = utils.read_ulong(desc_ring, off) + infos = utils.read_memoryview(inf, addr, info_sz * desc_ring_count).tobytes() + + # read in text data ring structure + off = printk_ringbuffer_type.get_type()['text_data_ring'].bitpos // 8 + addr = prb_addr + off + sz = prb_data_ring_type.get_type().sizeof + text_data_ring = utils.read_memoryview(inf, addr, sz).tobytes() + + # read in text data + off = prb_data_ring_type.get_type()['size_bits'].bitpos // 8 + text_data_sz = 1 << utils.read_u32(text_data_ring, off) + off = prb_data_ring_type.get_type()['data'].bitpos // 8 + addr = utils.read_ulong(text_data_ring, off) + text_data = utils.read_memoryview(inf, addr, text_data_sz).tobytes() + + counter_off = atomic_long_type.get_type()['counter'].bitpos // 8 + + sv_off = prb_desc_type.get_type()['state_var'].bitpos // 8 + + off = prb_desc_type.get_type()['text_blk_lpos'].bitpos // 8 + begin_off = off + (prb_data_blk_lpos_type.get_type()['begin'].bitpos // 8) + next_off = off + (prb_data_blk_lpos_type.get_type()['next'].bitpos // 8) + + ts_off = printk_info_type.get_type()['ts_nsec'].bitpos // 8 + len_off = printk_info_type.get_type()['text_len'].bitpos // 8 + + # definitions from kernel/printk/printk_ringbuffer.h + desc_committed = 1 + desc_finalized = 2 + desc_sv_bits = utils.get_long_type().sizeof * 8 + desc_flags_shift = desc_sv_bits - 2 + desc_flags_mask = 3 << desc_flags_shift + desc_id_mask = ~desc_flags_mask + + # read in tail and head descriptor ids + off = prb_desc_ring_type.get_type()['tail_id'].bitpos // 8 + tail_id = utils.read_u64(desc_ring, off + counter_off) + off = prb_desc_ring_type.get_type()['head_id'].bitpos // 8 + head_id = utils.read_u64(desc_ring, off + counter_off) + + did = tail_id + while True: + ind = did % desc_ring_count + desc_off = desc_sz * ind + info_off = info_sz * ind + + # skip non-committed record + state = 3 & (utils.read_u64(descs, desc_off + sv_off + + counter_off) >> desc_flags_shift) + if state != desc_committed and state != desc_finalized: + if did == head_id: break - pos = log_buf_2nd_half + did = (did + 1) & desc_id_mask continue - text_len = utils.read_u16(log_buf, pos + text_len_offset) - text_start = pos + text_offset - text = log_buf[text_start:text_start + text_len].decode( - encoding='utf8', errors='replace') - time_stamp = utils.read_u64(log_buf, pos + time_stamp_offset) + begin = utils.read_ulong(descs, desc_off + begin_off) % text_data_sz + end = utils.read_ulong(descs, desc_off + next_off) % text_data_sz + + # handle data-less record + if begin & 1 == 1: + text = "" + else: + # handle wrapping data block + if begin > end: + begin = 0 + + # skip over descriptor id + text_start = begin + utils.get_long_type().sizeof + + text_len = utils.read_u16(infos, info_off + len_off) + + # handle truncated message + if end - text_start < text_len: + text_len = end - text_start + + text = text_data[text_start:text_start + text_len].decode( + encoding='utf8', errors='replace') + + time_stamp = utils.read_u64(infos, info_off + ts_off) for line in text.splitlines(): msg = u"[{time:12.6f}] {line}\n".format( @@ -75,7 +146,9 @@ class LxDmesg(gdb.Command): msg = msg.encode(encoding='utf8', errors='replace') gdb.write(msg) - pos += length + if did == head_id: + break + did = (did + 1) & desc_id_mask LxDmesg() diff --git a/scripts/gdb/linux/utils.py b/scripts/gdb/linux/utils.py index ea94221dbd39..ff7c1799d588 100644 --- a/scripts/gdb/linux/utils.py +++ b/scripts/gdb/linux/utils.py @@ -123,6 +123,13 @@ def read_u64(buffer, offset): return read_u32(buffer, offset + 4) + (read_u32(buffer, offset) << 32) +def read_ulong(buffer, offset): + if get_long_type().sizeof == 8: + return read_u64(buffer, offset) + else: + return read_u32(buffer, offset) + + target_arch = None |