diff options
| -rw-r--r-- | drivers/cpufreq/s5pv210-cpufreq.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index 69786e5bbf05..ad7d4f272ddc 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -91,7 +91,7 @@ static DEFINE_MUTEX(set_freq_lock); /* Use 800MHz when entering sleep mode */ #define SLEEP_FREQ (800 * 1000) -/* Tracks if cpu freqency can be updated anymore */ +/* Tracks if CPU frequency can be updated anymore */ static bool no_cpufreq_access; /* @@ -190,7 +190,7 @@ static u32 clkdiv_val[5][11] = { /* * This function set DRAM refresh counter - * accoriding to operating frequency of DRAM + * according to operating frequency of DRAM * ch: DMC port number 0 or 1 * freq: Operating frequency of DRAM(KHz) */ @@ -320,7 +320,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) /* * 3. DMC1 refresh count for 133Mhz if (index == L4) is - * true refresh counter is already programed in upper + * true refresh counter is already programmed in upper * code. 0x287@83Mhz */ if (!bus_speed_changing) @@ -378,7 +378,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) /* * 6. Turn on APLL * 6-1. Set PMS values - * 6-2. Wait untile the PLL is locked + * 6-2. Wait until the PLL is locked */ if (index == L0) writel_relaxed(APLL_VAL_1000, S5P_APLL_CON); @@ -390,7 +390,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) } while (!(reg & (0x1 << 29))); /* - * 7. Change souce clock from SCLKMPLL(667Mhz) + * 7. Change source clock from SCLKMPLL(667Mhz) * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX * (667/4=166)->(200/4=50)Mhz */ @@ -439,8 +439,8 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) } /* - * L4 level need to change memory bus speed, hence onedram clock divier - * and memory refresh parameter should be changed + * L4 level needs to change memory bus speed, hence ONEDRAM clock + * divider and memory refresh parameter should be changed */ if (bus_speed_changing) { reg = readl_relaxed(S5P_CLK_DIV6); |