diff options
30 files changed, 294 insertions, 63 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index cad0882754a6..77c083dc5abe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -440,7 +440,7 @@ S: Maintained ARM/ATMEL AT91RM9200 ARM ARCHITECTURE P: Andrew Victor -M: andrew@sanpeople.com +M: linux@maxim.org.za L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://maxim.org.za/at91_26.html S: Maintained diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 0417c165d50d..9296833f91cc 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -14,6 +14,7 @@ #include <asm/mach/map.h> #include <linux/platform_device.h> +#include <linux/i2c-gpio.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> @@ -435,7 +436,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {} * TWI (i2c) * -------------------------------------------------------------------- */ -#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) +/* + * Prefer the GPIO code since the TWI controller isn't robust + * (gets overruns and underruns under load) and can only issue + * repeated STARTs in one scenario (the driver doesn't yet handle them). + */ +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + +static struct i2c_gpio_platform_data pdata = { + .sda_pin = AT91_PIN_PA25, + .sda_is_open_drain = 1, + .scl_pin = AT91_PIN_PA26, + .scl_is_open_drain = 1, + .udelay = 2, /* ~100 kHz */ +}; + +static struct platform_device at91rm9200_twi_device = { + .name = "i2c-gpio", + .id = -1, + .dev.platform_data = &pdata, +}; + +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) +{ + at91_set_GPIO_periph(AT91_PIN_PA25, 1); /* TWD (SDA) */ + at91_set_multi_drive(AT91_PIN_PA25, 1); + + at91_set_GPIO_periph(AT91_PIN_PA26, 1); /* TWCK (SCL) */ + at91_set_multi_drive(AT91_PIN_PA26, 1); + + i2c_register_board_info(0, devices, nr_devices); + platform_device_register(&at91rm9200_twi_device); +} + +#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) static struct resource twi_resources[] = { [0] = { @@ -457,7 +491,7 @@ static struct platform_device at91rm9200_twi_device = { .num_resources = ARRAY_SIZE(twi_resources), }; -void __init at91_add_device_i2c(void) +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) { /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */ @@ -466,10 +500,11 @@ void __init at91_add_device_i2c(void) at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */ at91_set_multi_drive(AT91_PIN_PA26, 1); + i2c_register_board_info(0, devices, nr_devices); platform_device_register(&at91rm9200_twi_device); } #else -void __init at91_add_device_i2c(void) {} +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} #endif diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index ffd3154c1e54..3091bf47d8c9 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -13,6 +13,7 @@ #include <asm/mach/map.h> #include <linux/platform_device.h> +#include <linux/i2c-gpio.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> @@ -352,7 +353,41 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {} * TWI (i2c) * -------------------------------------------------------------------- */ -#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) +/* + * Prefer the GPIO code since the TWI controller isn't robust + * (gets overruns and underruns under load) and can only issue + * repeated STARTs in one scenario (the driver doesn't yet handle them). + */ + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + +static struct i2c_gpio_platform_data pdata = { + .sda_pin = AT91_PIN_PA23, + .sda_is_open_drain = 1, + .scl_pin = AT91_PIN_PA24, + .scl_is_open_drain = 1, + .udelay = 2, /* ~100 kHz */ +}; + +static struct platform_device at91sam9260_twi_device = { + .name = "i2c-gpio", + .id = -1, + .dev.platform_data = &pdata, +}; + +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) +{ + at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */ + at91_set_multi_drive(AT91_PIN_PA23, 1); + + at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */ + at91_set_multi_drive(AT91_PIN_PA24, 1); + + i2c_register_board_info(0, devices, nr_devices); + platform_device_register(&at91sam9260_twi_device); +} + +#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) static struct resource twi_resources[] = { [0] = { @@ -374,7 +409,7 @@ static struct platform_device at91sam9260_twi_device = { .num_resources = ARRAY_SIZE(twi_resources), }; -void __init at91_add_device_i2c(void) +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) { /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */ @@ -383,10 +418,11 @@ void __init at91_add_device_i2c(void) at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */ at91_set_multi_drive(AT91_PIN_PA24, 1); + i2c_register_board_info(0, devices, nr_devices); platform_device_register(&at91sam9260_twi_device); } #else -void __init at91_add_device_i2c(void) {} +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} #endif diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 3576595b4941..64979a9023c2 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -14,7 +14,9 @@ #include <asm/mach/map.h> #include <linux/platform_device.h> +#include <linux/i2c-gpio.h> +#include <linux/fb.h> #include <video/atmel_lcdc.h> #include <asm/arch/board.h> @@ -275,7 +277,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {} * TWI (i2c) * -------------------------------------------------------------------- */ -#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) +/* + * Prefer the GPIO code since the TWI controller isn't robust + * (gets overruns and underruns under load) and can only issue + * repeated STARTs in one scenario (the driver doesn't yet handle them). + */ +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + +static struct i2c_gpio_platform_data pdata = { + .sda_pin = AT91_PIN_PA7, + .sda_is_open_drain = 1, + .scl_pin = AT91_PIN_PA8, + .scl_is_open_drain = 1, + .udelay = 2, /* ~100 kHz */ +}; + +static struct platform_device at91sam9261_twi_device = { + .name = "i2c-gpio", + .id = -1, + .dev.platform_data = &pdata, +}; + +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) +{ + at91_set_GPIO_periph(AT91_PIN_PA7, 1); /* TWD (SDA) */ + at91_set_multi_drive(AT91_PIN_PA7, 1); + + at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */ + at91_set_multi_drive(AT91_PIN_PA8, 1); + + i2c_register_board_info(0, devices, nr_devices); + platform_device_register(&at91sam9261_twi_device); +} + +#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) static struct resource twi_resources[] = { [0] = { @@ -297,7 +332,7 @@ static struct platform_device at91sam9261_twi_device = { .num_resources = ARRAY_SIZE(twi_resources), }; -void __init at91_add_device_i2c(void) +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) { /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */ @@ -306,10 +341,11 @@ void __init at91_add_device_i2c(void) at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */ at91_set_multi_drive(AT91_PIN_PA8, 1); + i2c_register_board_info(0, devices, nr_devices); platform_device_register(&at91sam9261_twi_device); } #else -void __init at91_add_device_i2c(void) {} +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} #endif diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index f924bd5017de..ac329a98e959 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -13,7 +13,9 @@ #include <asm/mach/map.h> #include <linux/platform_device.h> +#include <linux/i2c-gpio.h> +#include <linux/fb.h> #include <video/atmel_lcdc.h> #include <asm/arch/board.h> @@ -421,7 +423,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {} * TWI (i2c) * -------------------------------------------------------------------- */ -#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) +/* + * Prefer the GPIO code since the TWI controller isn't robust + * (gets overruns and underruns under load) and can only issue + * repeated STARTs in one scenario (the driver doesn't yet handle them). + */ +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + +static struct i2c_gpio_platform_data pdata = { + .sda_pin = AT91_PIN_PB4, + .sda_is_open_drain = 1, + .scl_pin = AT91_PIN_PB5, + .scl_is_open_drain = 1, + .udelay = 2, /* ~100 kHz */ +}; + +static struct platform_device at91sam9263_twi_device = { + .name = "i2c-gpio", + .id = -1, + .dev.platform_data = &pdata, +}; + +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) +{ + at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */ + at91_set_multi_drive(AT91_PIN_PB4, 1); + + at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */ + at91_set_multi_drive(AT91_PIN_PB5, 1); + + i2c_register_board_info(0, devices, nr_devices); + platform_device_register(&at91sam9263_twi_device); +} + +#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) static struct resource twi_resources[] = { [0] = { @@ -443,7 +478,7 @@ static struct platform_device at91sam9263_twi_device = { .num_resources = ARRAY_SIZE(twi_resources), }; -void __init at91_add_device_i2c(void) +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) { /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */ @@ -452,10 +487,11 @@ void __init at91_add_device_i2c(void) at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */ at91_set_multi_drive(AT91_PIN_PB5, 1); + i2c_register_board_info(0, devices, nr_devices); platform_device_register(&at91sam9263_twi_device); } #else -void __init at91_add_device_i2c(void) {} +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} #endif diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index cd7532bcd4e5..2bd60a3dc623 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -10,8 +10,9 @@ #include <asm/mach/map.h> #include <linux/platform_device.h> -#include <linux/fb.h> +#include <linux/i2c-gpio.h> +#include <linux/fb.h> #include <video/atmel_lcdc.h> #include <asm/arch/board.h> @@ -169,7 +170,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {} * TWI (i2c) * -------------------------------------------------------------------- */ -#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) +/* + * Prefer the GPIO code since the TWI controller isn't robust + * (gets overruns and underruns under load) and can only issue + * repeated STARTs in one scenario (the driver doesn't yet handle them). + */ +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + +static struct i2c_gpio_platform_data pdata = { + .sda_pin = AT91_PIN_PA23, + .sda_is_open_drain = 1, + .scl_pin = AT91_PIN_PA24, + .scl_is_open_drain = 1, + .udelay = 2, /* ~100 kHz */ +}; + +static struct platform_device at91sam9rl_twi_device = { + .name = "i2c-gpio", + .id = -1, + .dev.platform_data = &pdata, +}; + +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) +{ + at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */ + at91_set_multi_drive(AT91_PIN_PA23, 1); + + at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */ + at91_set_multi_drive(AT91_PIN_PA24, 1); + + i2c_register_board_info(0, devices, nr_devices); + platform_device_register(&at91sam9rl_twi_device); +} + +#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) static struct resource twi_resources[] = { [0] = { @@ -191,7 +225,7 @@ static struct platform_device at91sam9rl_twi_device = { .num_resources = ARRAY_SIZE(twi_resources), }; -void __init at91_add_device_i2c(void) +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) { /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */ @@ -200,10 +234,11 @@ void __init at91_add_device_i2c(void) at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */ at91_set_multi_drive(AT91_PIN_PA24, 1); + i2c_register_board_info(0, devices, nr_devices); platform_device_register(&at91sam9rl_twi_device); } #else -void __init at91_add_device_i2c(void) {} +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} #endif diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 76ec856cd4f9..0f0878294a67 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -128,7 +128,7 @@ static void __init carmeva_board_init(void) /* USB Device */ at91_add_device_udc(&carmeva_udc_data); /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(NULL, 0); /* SPI */ at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices)); /* Compact Flash */ diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index dde089922e3b..d0aa20c9383e 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -23,7 +23,6 @@ #include <linux/mm.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/mtd/physmap.h> @@ -85,12 +84,12 @@ static struct at91_udc_data __initdata csb337_udc_data = { }; static struct i2c_board_info __initdata csb337_i2c_devices[] = { - { I2C_BOARD_INFO("rtc-ds1307", 0x68), - .type = "ds1307", + { + I2C_BOARD_INFO("rtc-ds1307", 0x68), + .type = "ds1307", }, }; - static struct at91_cf_data __initdata csb337_cf_data = { /* * connector P4 on the CSB 337 mates to @@ -168,9 +167,7 @@ static void __init csb337_board_init(void) /* USB Device */ at91_add_device_udc(&csb337_udc_data); /* I2C */ - at91_add_device_i2c(); - i2c_register_board_info(0, csb337_i2c_devices, - ARRAY_SIZE(csb337_i2c_devices)); + at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices)); /* Compact Flash */ at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */ at91_add_device_cf(&csb337_cf_data); diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 77f04b935b3a..c5c721d27f42 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -129,7 +129,7 @@ static void __init csb637_board_init(void) /* USB Device */ at91_add_device_udc(&csb637_udc_data); /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(NULL, 0); /* SPI */ at91_add_device_spi(NULL, 0); /* NOR flash */ diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index af497896a96c..40c9e4331706 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -124,6 +124,19 @@ static struct spi_board_info dk_spi_devices[] = { #endif }; +static struct i2c_board_info __initdata dk_i2c_devices[] = { + { + I2C_BOARD_INFO("ics1523", 0x26), + }, + { + I2C_BOARD_INFO("x9429", 0x28), + }, + { + I2C_BOARD_INFO("at24c", 0x50), + .type = "24c1024", + } +}; + static struct mtd_partition __initdata dk_nand_partition[] = { { .name = "NAND Partition 1", @@ -185,7 +198,7 @@ static void __init dk_board_init(void) /* Compact Flash */ at91_add_device_cf(&dk_cf_data); /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices)); /* SPI */ at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices)); #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 20458b5548f0..b7b79bb9d6c4 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -91,6 +91,14 @@ static struct at91_mmc_data __initdata eb9200_mmc_data = { .wire4 = 1, }; +static struct i2c_board_info __initdata eb9200_i2c_devices[] = { + { + I2C_BOARD_INFO("at24c", 0x50), + .type = "24c512", + }, +}; + + static void __init eb9200_board_init(void) { /* Serial */ @@ -102,7 +110,7 @@ static void __init eb9200_board_init(void) /* USB Device */ at91_add_device_udc(&eb9200_udc_data); /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices)); /* Compact Flash */ at91_add_device_cf(&eb9200_cf_data); /* SPI */ diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c index 322fdd75a1e4..d05b1b2be9fb 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-ek.c @@ -145,7 +145,7 @@ static void __init ek_board_init(void) at91_add_device_udc(&ek_udc_data); at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* SPI */ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index c77d84ce9cae..cf1b7b2f76fb 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -92,7 +92,7 @@ static void __init kafa_board_init(void) /* USB Device */ at91_add_device_udc(&kafa_udc_data); /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(NULL, 0); /* SPI */ at91_add_device_spi(NULL, 0); } diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 7d9b1a278fd6..4b39b9cda75b 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -124,7 +124,7 @@ static void __init kb9202_board_init(void) /* MMC */ at91_add_device_mmc(0, &kb9202_mmc_data); /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(NULL, 0); /* SPI */ at91_add_device_spi(NULL, 0); /* NAND */ diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 49cfe7ab4a85..6acb55c09ae5 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -139,7 +139,7 @@ static void __init picotux200_board_init(void) // at91_add_device_udc(&picotux200_udc_data); // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(NULL, 0); /* SPI */ // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices)); #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 65fa532bb4ac..b343a6c28120 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -189,7 +189,7 @@ static void __init ek_board_init(void) /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(NULL, 0); } MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 42e172cb0f49..550ae59a3aca 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -382,14 +382,14 @@ static struct platform_device ek_button_device = { static void __init ek_add_device_buttons(void) { - at91_set_gpio_input(AT91_PIN_PB27, 0); /* btn0 */ - at91_set_deglitch(AT91_PIN_PB27, 1); - at91_set_gpio_input(AT91_PIN_PB26, 0); /* btn1 */ - at91_set_deglitch(AT91_PIN_PB26, 1); - at91_set_gpio_input(AT91_PIN_PB25, 0); /* btn2 */ - at91_set_deglitch(AT91_PIN_PB25, 1); - at91_set_gpio_input(AT91_PIN_PB24, 0); /* btn3 */ - at91_set_deglitch(AT91_PIN_PB24, 1); + at91_set_gpio_input(AT91_PIN_PA27, 0); /* btn0 */ + at91_set_deglitch(AT91_PIN_PA27, 1); + at91_set_gpio_input(AT91_PIN_PA26, 0); /* btn1 */ + at91_set_deglitch(AT91_PIN_PA26, 1); + at91_set_gpio_input(AT91_PIN_PA25, 0); /* btn2 */ + at91_set_deglitch(AT91_PIN_PA25, 1); + at91_set_gpio_input(AT91_PIN_PA24, 0); /* btn3 */ + at91_set_deglitch(AT91_PIN_PA24, 1); platform_device_register(&ek_button_device); } @@ -406,7 +406,7 @@ static void __init ek_board_init(void) /* USB Device */ at91_add_device_udc(&ek_udc_data); /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(NULL, 0); /* NAND */ at91_add_device_nand(&ek_nand_data); /* DM9000 ethernet */ diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 2a1cc73390b7..ab9dcc075454 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -291,7 +291,7 @@ static void __init ek_board_init(void) /* NAND */ at91_add_device_nand(&ek_nand_data); /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(NULL, 0); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); /* AC97 */ diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 9b61320f295a..bc0546d7245f 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -181,7 +181,7 @@ static void __init ek_board_init(void) /* Serial */ at91_add_device_serial(); /* I2C */ - at91_add_device_i2c(); + at91_add_device_i2c(NULL, 0); /* NAND */ at91_add_device_nand(&ek_nand_data); /* SPI */ diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 848efb2a4ebf..57c3b647ce83 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -351,7 +351,7 @@ static void init_programmable_clock(struct clk *clk) pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); parent = at91_css_to_clk(pckr & AT91_PMC_CSS); clk->parent = parent; - clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3)); + clk->rate_hz = parent->rate_hz / (1 << ((pckr & AT91_PMC_PRES) >> 2)); } #endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ @@ -587,8 +587,11 @@ int __init at91_clock_init(unsigned long main_clock) mckr = at91_sys_read(AT91_PMC_MCKR); mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS); freq = mck.parent->rate_hz; - freq /= (1 << ((mckr >> 2) & 3)); /* prescale */ - mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */ + freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */ + if (cpu_is_at91rm9200()) + mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ + else + mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index d0f2b597db12..8e126e6b74c3 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -146,7 +146,7 @@ static struct clk pxa27x_clks[] = { INIT_CKEN("MMCCLK", MMC, 19500000, 0, &pxa_device_mci.dev), INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev), - INIT_CKEN("USBCLK", USB, 48000000, 0, &pxa27x_device_ohci.dev), + INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev), INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 1010f77d977a..74128eb8f8d0 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -23,8 +23,11 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = { MFP_ADDR_X(GPIO0, GPIO4, 0x0124), - MFP_ADDR_X(GPIO5, GPIO26, 0x028C), - MFP_ADDR_X(GPIO27, GPIO62, 0x0400), + MFP_ADDR_X(GPIO5, GPIO9, 0x028C), + MFP_ADDR(GPIO10, 0x0458), + MFP_ADDR_X(GPIO11, GPIO26, 0x02A0), + MFP_ADDR_X(GPIO27, GPIO48, 0x0400), + MFP_ADDR_X(GPIO49, GPIO62, 0x045C), MFP_ADDR_X(GPIO63, GPIO73, 0x04B4), MFP_ADDR_X(GPIO74, GPIO98, 0x04F0), MFP_ADDR_X(GPIO99, GPIO127, 0x0600), diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 71766ac0328b..422afee88169 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -309,6 +309,7 @@ void ssp_exit(struct ssp_dev *dev) if (dev->port > PXA_SSP_PORTS || dev->port == 0) { printk(KERN_WARNING "SSP: tried to close invalid port\n"); + mutex_unlock(&mutex); return; } diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index af3a011b2b24..352fcb8926a6 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -585,11 +585,11 @@ serial_pxa_type(struct uart_port *port) return up->name; } -#ifdef CONFIG_SERIAL_PXA_CONSOLE - static struct uart_pxa_port *serial_pxa_ports[4]; static struct uart_driver serial_pxa_reg; +#ifdef CONFIG_SERIAL_PXA_CONSOLE + #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) /* diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index c0d7075982c1..79054965baa6 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -33,6 +33,7 @@ #include <linux/mtd/partitions.h> #include <linux/device.h> +#include <linux/i2c.h> #include <linux/spi/spi.h> /* USB Device */ @@ -94,7 +95,7 @@ struct at91_nand_data { extern void __init at91_add_device_nand(struct at91_nand_data *data); /* I2C*/ -extern void __init at91_add_device_i2c(void); +extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices); /* SPI */ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index 6238dbf7a236..b76ee6d1f5b4 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -13,7 +13,7 @@ #define PXA_IRQ(x) (x) -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */ #define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */ #define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */ @@ -52,11 +52,27 @@ #define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */ #define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */ -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */ #define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */ #endif +#ifdef CONFIG_PXA3xx +#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */ +#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */ +#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */ +#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */ +#define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */ +#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */ +#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */ +#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */ +#define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */ +#define IRQ_WAKEUP0 PXA_IRQ(49) /* EXT_WAKEUP0 */ +#define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */ +#define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */ +#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */ +#endif + #define PXA_GPIO_IRQ_BASE (64) #define PXA_GPIO_IRQ_NUM (128) diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h index 822a27cd7864..a20996649889 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa300.h +++ b/include/asm-arm/arch-pxa/mfp-pxa300.h @@ -179,7 +179,7 @@ #define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X) #define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X) #define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X) -#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS01X) +#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS02X) #define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X) #define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X) diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h index 488a5bbc49e9..52deedcaf3bd 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa320.h +++ b/include/asm-arm/arch-pxa/mfp-pxa320.h @@ -18,7 +18,7 @@ #include <asm/arch/mfp.h> /* GPIO */ -#define GPIO46_GPIO MFP_CFG(GPIO6, AF0) +#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) #define GPIO49_GPIO MFP_CFG(GPIO49, AF0) #define GPIO50_GPIO MFP_CFG(GPIO50, AF0) #define GPIO51_GPIO MFP_CFG(GPIO51, AF0) diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h index ac4157af5a8e..03c508d94f0e 100644 --- a/include/asm-arm/arch-pxa/mfp.h +++ b/include/asm-arm/arch-pxa/mfp.h @@ -346,23 +346,31 @@ typedef uint32_t mfp_cfg_t; #define MFP_CFG_PIN(mfp_cfg) (((mfp_cfg) >> 16) & 0xffff) #define MFP_CFG_VAL(mfp_cfg) ((mfp_cfg) & 0xffff) -#define MFPR_DEFAULT (0x0000) +/* + * MFP register defaults to + * drive strength fast 3mA (010'b) + * edge detection logic disabled + * alternate function 0 + */ +#define MFPR_DEFAULT (0x0840) #define MFP_CFG(pin, af) \ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af)) #define MFP_CFG_DRV(pin, af, drv) \ - ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\ + ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_DRV_MASK) |\ ((MFP_##drv) << 10) | (MFP_##af)) #define MFP_CFG_LPM(pin, af, lpm) \ - ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af) |\ + ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_LPM_MASK) |\ (((MFP_LPM_##lpm) & 0x3) << 7) |\ (((MFP_LPM_##lpm) & 0x4) << 12) |\ - (((MFP_LPM_##lpm) & 0x8) << 10)) + (((MFP_LPM_##lpm) & 0x8) << 10) |\ + (MFP_##af)) #define MFP_CFG_X(pin, af, drv, lpm) \ - ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\ + ((MFP_PIN_##pin << 16) |\ + (MFPR_DEFAULT & ~(MFPR_DRV_MASK | MFPR_LPM_MASK)) |\ ((MFP_##drv) << 10) | (MFP_##af) |\ (((MFP_LPM_##lpm) & 0x3) << 7) |\ (((MFP_LPM_##lpm) & 0x4) << 12) |\ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index bb68b598c436..6b33df6f1995 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -110,7 +110,10 @@ #define DALGN __REG(0x400000a0) /* DMA Alignment Register */ #define DINT __REG(0x400000f0) /* DMA Interrupt Register */ -#define DRCMR(n) __REG2(0x40000100, (n)<<2) +#define DRCMR(n) (*(((n) < 64) ? \ + &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ + &__REG2(0x40001100, ((n) & 0x3f) << 2))) + #define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ #define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ #define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ |