summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/pinctrl.txt11
-rw-r--r--drivers/pinctrl/pinconf.c174
-rw-r--r--include/linux/pinctrl/consumer.h43
3 files changed, 2 insertions, 226 deletions
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
index 3ee24759be0f..c5948c7d662a 100644
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -203,15 +203,8 @@ using a certain resistor value - pull up and pull down - so that the pin has a
stable value when nothing is driving the rail it is connected to, or when it's
unconnected.
-Pin configuration can be programmed either using the explicit APIs described
-immediately below, or by adding configuration entries into the mapping table;
-see section "Board/machine configuration" below.
-
-For example, a platform may do the following to pull up a pin to VDD:
-
-#include <linux/pinctrl/consumer.h>
-
-ret = pin_config_set("foo-dev", "FOO_GPIO_PIN", PLATFORM_X_PULL_UP);
+Pin configuration can be programmed by adding configuration entries into the
+mapping table; see section "Board/machine configuration" below.
The format and meaning of the configuration parameter, PLATFORM_X_PULL_UP
above, is entirely defined by the pin controller driver.
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
index 694c3ace4520..e875f21a5908 100644
--- a/drivers/pinctrl/pinconf.c
+++ b/drivers/pinctrl/pinconf.c
@@ -75,98 +75,6 @@ int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
return ops->pin_config_get(pctldev, pin, config);
}
-/**
- * pin_config_get() - get the configuration of a single pin parameter
- * @dev_name: name of the pin controller device for this pin
- * @name: name of the pin to get the config for
- * @config: the config pointed to by this argument will be filled in with the
- * current pin state, it can be used directly by drivers as a numeral, or
- * it can be dereferenced to any struct.
- */
-int pin_config_get(const char *dev_name, const char *name,
- unsigned long *config)
-{
- struct pinctrl_dev *pctldev;
- int pin;
-
- pctldev = get_pinctrl_dev_from_devname(dev_name);
- if (!pctldev) {
- pin = -EINVAL;
- return pin;
- }
-
- mutex_lock(&pctldev->mutex);
-
- pin = pin_get_from_name(pctldev, name);
- if (pin < 0)
- goto unlock;
-
- pin = pin_config_get_for_pin(pctldev, pin, config);
-
-unlock:
- mutex_unlock(&pctldev->mutex);
- return pin;
-}
-EXPORT_SYMBOL(pin_config_get);
-
-static int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
- unsigned long config)
-{
- const struct pinconf_ops *ops = pctldev->desc->confops;
- int ret;
-
- if (!ops || !ops->pin_config_set) {
- dev_err(pctldev->dev, "cannot configure pin, missing "
- "config function in driver\n");
- return -EINVAL;
- }
-
- ret = ops->pin_config_set(pctldev, pin, config);
- if (ret) {
- dev_err(pctldev->dev,
- "unable to set pin configuration on pin %d\n", pin);
- return ret;
- }
-
- return 0;
-}
-
-/**
- * pin_config_set() - set the configuration of a single pin parameter
- * @dev_name: name of pin controller device for this pin
- * @name: name of the pin to set the config for
- * @config: the config in this argument will contain the desired pin state, it
- * can be used directly by drivers as a numeral, or it can be dereferenced
- * to any struct.
- */
-int pin_config_set(const char *dev_name, const char *name,
- unsigned long config)
-{
- struct pinctrl_dev *pctldev;
- int pin, ret;
-
- pctldev = get_pinctrl_dev_from_devname(dev_name);
- if (!pctldev) {
- ret = -EINVAL;
- return ret;
- }
-
- mutex_lock(&pctldev->mutex);
-
- pin = pin_get_from_name(pctldev, name);
- if (pin < 0) {
- ret = pin;
- goto unlock;
- }
-
- ret = pin_config_set_for_pin(pctldev, pin, config);
-
-unlock:
- mutex_unlock(&pctldev->mutex);
- return ret;
-}
-EXPORT_SYMBOL(pin_config_set);
-
int pin_config_group_get(const char *dev_name, const char *pin_group,
unsigned long *config)
{
@@ -204,88 +112,6 @@ unlock:
mutex_unlock(&pctldev->mutex);
return ret;
}
-EXPORT_SYMBOL(pin_config_group_get);
-
-int pin_config_group_set(const char *dev_name, const char *pin_group,
- unsigned long config)
-{
- struct pinctrl_dev *pctldev;
- const struct pinconf_ops *ops;
- const struct pinctrl_ops *pctlops;
- int selector;
- const unsigned *pins;
- unsigned num_pins;
- int ret;
- int i;
-
- pctldev = get_pinctrl_dev_from_devname(dev_name);
- if (!pctldev) {
- ret = -EINVAL;
- return ret;
- }
-
- mutex_lock(&pctldev->mutex);
-
- ops = pctldev->desc->confops;
- pctlops = pctldev->desc->pctlops;
-
- if (!ops || (!ops->pin_config_group_set && !ops->pin_config_set)) {
- dev_err(pctldev->dev, "cannot configure pin group, missing "
- "config function in driver\n");
- ret = -EINVAL;
- goto unlock;
- }
-
- selector = pinctrl_get_group_selector(pctldev, pin_group);
- if (selector < 0) {
- ret = selector;
- goto unlock;
- }
-
- ret = pctlops->get_group_pins(pctldev, selector, &pins, &num_pins);
- if (ret) {
- dev_err(pctldev->dev, "cannot configure pin group, error "
- "getting pins\n");
- goto unlock;
- }
-
- /*
- * If the pin controller supports handling entire groups we use that
- * capability.
- */
- if (ops->pin_config_group_set) {
- ret = ops->pin_config_group_set(pctldev, selector, config);
- /*
- * If the pin controller prefer that a certain group be handled
- * pin-by-pin as well, it returns -EAGAIN.
- */
- if (ret != -EAGAIN)
- goto unlock;
- }
-
- /*
- * If the controller cannot handle entire groups, we configure each pin
- * individually.
- */
- if (!ops->pin_config_set) {
- ret = 0;
- goto unlock;
- }
-
- for (i = 0; i < num_pins; i++) {
- ret = ops->pin_config_set(pctldev, pins[i], config);
- if (ret < 0)
- goto unlock;
- }
-
- ret = 0;
-
-unlock:
- mutex_unlock(&pctldev->mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(pin_config_group_set);
int pinconf_map_to_setting(struct pinctrl_map const *map,
struct pinctrl_setting *setting)
diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h
index d071d850d1de..18eccefea06e 100644
--- a/include/linux/pinctrl/consumer.h
+++ b/include/linux/pinctrl/consumer.h
@@ -192,47 +192,4 @@ static inline struct pinctrl * __must_check devm_pinctrl_get_select_default(
return devm_pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
}
-#ifdef CONFIG_PINCONF
-
-extern int pin_config_get(const char *dev_name, const char *name,
- unsigned long *config);
-extern int pin_config_set(const char *dev_name, const char *name,
- unsigned long config);
-extern int pin_config_group_get(const char *dev_name,
- const char *pin_group,
- unsigned long *config);
-extern int pin_config_group_set(const char *dev_name,
- const char *pin_group,
- unsigned long config);
-
-#else
-
-static inline int pin_config_get(const char *dev_name, const char *name,
- unsigned long *config)
-{
- return 0;
-}
-
-static inline int pin_config_set(const char *dev_name, const char *name,
- unsigned long config)
-{
- return 0;
-}
-
-static inline int pin_config_group_get(const char *dev_name,
- const char *pin_group,
- unsigned long *config)
-{
- return 0;
-}
-
-static inline int pin_config_group_set(const char *dev_name,
- const char *pin_group,
- unsigned long config)
-{
- return 0;
-}
-
-#endif
-
#endif /* __LINUX_PINCTRL_CONSUMER_H */