diff options
| -rw-r--r-- | Documentation/devicetree/bindings/dma/bcm2835-dma.txt | 57 | ||||
| -rw-r--r-- | drivers/dma/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/dma/Makefile | 1 | ||||
| -rw-r--r-- | drivers/dma/bcm2835-dma.c | 706 |
4 files changed, 770 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/dma/bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/bcm2835-dma.txt new file mode 100644 index 000000000000..1396078d15ac --- /dev/null +++ b/Documentation/devicetree/bindings/dma/bcm2835-dma.txt @@ -0,0 +1,57 @@ +* BCM2835 DMA controller + +The BCM2835 DMA controller has 16 channels in total. +Only the lower 13 channels have an associated IRQ. +Some arbitrary channels are used by the firmware +(1,3,6,7 in the current firmware version). +The channels 0,2 and 3 have special functionality +and should not be used by the driver. + +Required properties: +- compatible: Should be "brcm,bcm2835-dma". +- reg: Should contain DMA registers location and length. +- interrupts: Should contain the DMA interrupts associated + to the DMA channels in ascending order. +- #dma-cells: Must be <1>, the cell in the dmas property of the + client device represents the DREQ number. +- brcm,dma-channel-mask: Bit mask representing the channels + not used by the firmware in ascending order, + i.e. first channel corresponds to LSB. + +Example: + +dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16>, + <1 17>, + <1 18>, + <1 19>, + <1 20>, + <1 21>, + <1 22>, + <1 23>, + <1 24>, + <1 25>, + <1 26>, + <1 27>, + <1 28>; + + #dma-cells = <1>; + brcm,dma-channel-mask = <0x7f35>; +}; + +DMA clients connected to the BCM2835 DMA controller must use the format +described in the dma.txt file, using a two-cell specifier for each channel. + +Example: + +bcm2835_i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; + reg = < 0x7e203000 0x20>, + < 0x7e101098 0x02>; + + dmas = <&dma 2>, + <&dma 3>; + dma-names = "tx", "rx"; +}; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 446687cc2334..cff5f1e39cf7 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -301,6 +301,12 @@ config DMA_OMAP select DMA_ENGINE select DMA_VIRTUAL_CHANNELS +config DMA_BCM2835 + tristate "BCM2835 DMA engine support" + depends on (ARCH_BCM2835 || MACH_BCM2708) + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + config TI_CPPI41 tristate "AM33xx CPPI41 DMA support" depends on ARCH_OMAP diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 0ce2da97e429..0a6f08edf2c8 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o obj-$(CONFIG_DMA_OMAP) += omap-dma.o +obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o obj-$(CONFIG_TI_CPPI41) += cppi41.o diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c new file mode 100644 index 000000000000..6ae070825f3f --- /dev/null +++ b/drivers/dma/bcm2835-dma.c @@ -0,0 +1,706 @@ +/* + * BCM2835 DMA engine support + * + * This driver only supports cyclic DMA transfers + * as needed for the I2S module. + * + * Author: Florian Meier <florian.meier@koalo.de> + * Copyright 2013 + * + * Based on + * OMAP DMAengine support by Russell King + * + * BCM2708 DMA Driver + * Copyright (C) 2010 Broadcom + * + * Raspberry Pi PCM I2S ALSA Driver + * Copyright (c) by Phil Poole 2013 + * + * MARVELL MMP Peripheral DMA Driver + * Copyright 2012 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/of.h> +#include <linux/of_dma.h> + +#include "virt-dma.h" + +struct bcm2835_dmadev { + struct dma_device ddev; + spinlock_t lock; + void __iomem *base; + struct device_dma_parameters dma_parms; +}; + +struct bcm2835_dma_cb { + uint32_t info; + uint32_t src; + uint32_t dst; + uint32_t length; + uint32_t stride; + uint32_t next; + uint32_t pad[2]; +}; + +struct bcm2835_chan { + struct virt_dma_chan vc; + struct list_head node; + + struct dma_slave_config cfg; + bool cyclic; + unsigned int dreq; + + int ch; + struct bcm2835_desc *desc; + + void __iomem *chan_base; + int irq_number; +}; + +struct bcm2835_desc { + struct virt_dma_desc vd; + enum dma_transfer_direction dir; + + unsigned int control_block_size; + struct bcm2835_dma_cb *control_block_base; + dma_addr_t control_block_base_phys; + + unsigned int frames; + size_t size; +}; + +#define BCM2835_DMA_CS 0x00 +#define BCM2835_DMA_ADDR 0x04 +#define BCM2835_DMA_SOURCE_AD 0x0c +#define BCM2835_DMA_DEST_AD 0x10 +#define BCM2835_DMA_NEXTCB 0x1C + +/* DMA CS Control and Status bits */ +#define BCM2835_DMA_ACTIVE BIT(0) +#define BCM2835_DMA_INT BIT(2) +#define BCM2835_DMA_ISPAUSED BIT(4) /* Pause requested or not active */ +#define BCM2835_DMA_ISHELD BIT(5) /* Is held by DREQ flow control */ +#define BCM2835_DMA_ERR BIT(8) +#define BCM2835_DMA_ABORT BIT(30) /* Stop current CB, go to next, WO */ +#define BCM2835_DMA_RESET BIT(31) /* WO, self clearing */ + +#define BCM2835_DMA_INT_EN BIT(0) +#define BCM2835_DMA_D_INC BIT(4) +#define BCM2835_DMA_D_DREQ BIT(6) +#define BCM2835_DMA_S_INC BIT(8) +#define BCM2835_DMA_S_DREQ BIT(10) + +#define BCM2835_DMA_PER_MAP(x) ((x) << 16) + +#define BCM2835_DMA_DATA_TYPE_S8 1 +#define BCM2835_DMA_DATA_TYPE_S16 2 +#define BCM2835_DMA_DATA_TYPE_S32 4 +#define BCM2835_DMA_DATA_TYPE_S128 16 + +#define BCM2835_DMA_BULK_MASK BIT(0) +#define BCM2835_DMA_FIQ_MASK (BIT(2) | BIT(3)) + +/* Valid only for channels 0 - 14, 15 has its own base address */ +#define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */ +#define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n)) + +static inline struct bcm2835_dmadev *to_bcm2835_dma_dev(struct dma_device *d) +{ + return container_of(d, struct bcm2835_dmadev, ddev); +} + +static inline struct bcm2835_chan *to_bcm2835_dma_chan(struct dma_chan *c) +{ + return container_of(c, struct bcm2835_chan, vc.chan); +} + +static inline struct bcm2835_desc *to_bcm2835_dma_desc( + struct dma_async_tx_descriptor *t) +{ + return container_of(t, struct bcm2835_desc, vd.tx); +} + +static void bcm2835_dma_desc_free(struct virt_dma_desc *vd) +{ + struct bcm2835_desc *desc = container_of(vd, struct bcm2835_desc, vd); + dma_free_coherent(desc->vd.tx.chan->device->dev, + desc->control_block_size, + desc->control_block_base, + desc->control_block_base_phys); + kfree(desc); +} + +static int bcm2835_dma_abort(void __iomem *chan_base) +{ + unsigned long cs; + long int timeout = 10000; + + cs = readl(chan_base + BCM2835_DMA_CS); + if (!(cs & BCM2835_DMA_ACTIVE)) + return 0; + + /* Write 0 to the active bit - Pause the DMA */ + writel(0, chan_base + BCM2835_DMA_CS); + + /* Wait for any current AXI transfer to complete */ + while ((cs & BCM2835_DMA_ISPAUSED) && --timeout) { + cpu_relax(); + cs = readl(chan_base + BCM2835_DMA_CS); + } + + /* We'll un-pause when we set of our next DMA */ + if (!timeout) + return -ETIMEDOUT; + + if (!(cs & BCM2835_DMA_ACTIVE)) + return 0; + + /* Terminate the control block chain */ + writel(0, chan_base + BCM2835_DMA_NEXTCB); + + /* Abort the whole DMA */ + writel(BCM2835_DMA_ABORT | BCM2835_DMA_ACTIVE, + chan_base + BCM2835_DMA_CS); + + return 0; +} + +static void bcm2835_dma_start_desc(struct bcm2835_chan *c) +{ + struct virt_dma_desc *vd = vchan_next_desc(&c->vc); + struct bcm2835_desc *d; + + if (!vd) { + c->desc = NULL; + return; + } + + list_del(&vd->node); + + c->desc = d = to_bcm2835_dma_desc(&vd->tx); + + writel(d->control_block_base_phys, c->chan_base + BCM2835_DMA_ADDR); + writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS); +} + +static irqreturn_t bcm2835_dma_callback(int irq, void *data) +{ + struct bcm2835_chan *c = data; + struct bcm2835_desc *d; + unsigned long flags; + + spin_lock_irqsave(&c->vc.lock, flags); + + /* Acknowledge interrupt */ + writel(BCM2835_DMA_INT, c->chan_base + BCM2835_DMA_CS); + + d = c->desc; + + if (d) { + /* TODO Only works for cyclic DMA */ + vchan_cyclic_callback(&d->vd); + } + + /* Keep the DMA engine running */ + writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS); + + spin_unlock_irqrestore(&c->vc.lock, flags); + + return IRQ_HANDLED; +} + +static int bcm2835_dma_alloc_chan_resources(struct dma_chan *chan) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + + dev_dbg(c->vc.chan.device->dev, + "Allocating DMA channel %d\n", c->ch); + + return request_irq(c->irq_number, + bcm2835_dma_callback, 0, "DMA IRQ", c); +} + +static void bcm2835_dma_free_chan_resources(struct dma_chan *chan) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + + vchan_free_chan_resources(&c->vc); + free_irq(c->irq_number, c); + + dev_dbg(c->vc.chan.device->dev, "Freeing DMA channel %u\n", c->ch); +} + +static size_t bcm2835_dma_desc_size(struct bcm2835_desc *d) +{ + return d->size; +} + +static size_t bcm2835_dma_desc_size_pos(struct bcm2835_desc *d, dma_addr_t addr) +{ + unsigned int i; + size_t size; + + for (size = i = 0; i < d->frames; i++) { + struct bcm2835_dma_cb *control_block = + &d->control_block_base[i]; + size_t this_size = control_block->length; + dma_addr_t dma; + + if (d->dir == DMA_DEV_TO_MEM) + dma = control_block->dst; + else + dma = control_block->src; + + if (size) + size += this_size; + else if (addr >= dma && addr < dma + this_size) + size += dma + this_size - addr; + } + + return size; +} + +static enum dma_status bcm2835_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *txstate) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + struct virt_dma_desc *vd; + enum dma_status ret; + unsigned long flags; + + ret = dma_cookie_status(chan, cookie, txstate); + if (ret == DMA_COMPLETE || !txstate) + return ret; + + spin_lock_irqsave(&c->vc.lock, flags); + vd = vchan_find_desc(&c->vc, cookie); + if (vd) { + txstate->residue = + bcm2835_dma_desc_size(to_bcm2835_dma_desc(&vd->tx)); + } else if (c->desc && c->desc->vd.tx.cookie == cookie) { + struct bcm2835_desc *d = c->desc; + dma_addr_t pos; + + if (d->dir == DMA_MEM_TO_DEV) + pos = readl(c->chan_base + BCM2835_DMA_SOURCE_AD); + else if (d->dir == DMA_DEV_TO_MEM) + pos = readl(c->chan_base + BCM2835_DMA_DEST_AD); + else + pos = 0; + + txstate->residue = bcm2835_dma_desc_size_pos(d, pos); + } else { + txstate->residue = 0; + } + + spin_unlock_irqrestore(&c->vc.lock, flags); + + return ret; +} + +static void bcm2835_dma_issue_pending(struct dma_chan *chan) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + unsigned long flags; + + c->cyclic = true; /* Nothing else is implemented */ + + spin_lock_irqsave(&c->vc.lock, flags); + if (vchan_issue_pending(&c->vc) && !c->desc) + bcm2835_dma_start_desc(c); + + spin_unlock_irqrestore(&c->vc.lock, flags); +} + +static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction direction, + unsigned long flags, void *context) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + enum dma_slave_buswidth dev_width; + struct bcm2835_desc *d; + dma_addr_t dev_addr; + unsigned int es, sync_type; + unsigned int frame; + + /* Grab configuration */ + if (!is_slave_direction(direction)) { + dev_err(chan->device->dev, "%s: bad direction?\n", __func__); + return NULL; + } + + if (direction == DMA_DEV_TO_MEM) { + dev_addr = c->cfg.src_addr; + dev_width = c->cfg.src_addr_width; + sync_type = BCM2835_DMA_S_DREQ; + } else { + dev_addr = c->cfg.dst_addr; + dev_width = c->cfg.dst_addr_width; + sync_type = BCM2835_DMA_D_DREQ; + } + + /* Bus width translates to the element size (ES) */ + switch (dev_width) { + case DMA_SLAVE_BUSWIDTH_4_BYTES: + es = BCM2835_DMA_DATA_TYPE_S32; + break; + default: + return NULL; + } + + /* Now allocate and setup the descriptor. */ + d = kzalloc(sizeof(*d), GFP_NOWAIT); + if (!d) + return NULL; + + d->dir = direction; + d->frames = buf_len / period_len; + + /* Allocate memory for control blocks */ + d->control_block_size = d->frames * sizeof(struct bcm2835_dma_cb); + d->control_block_base = dma_zalloc_coherent(chan->device->dev, + d->control_block_size, &d->control_block_base_phys, + GFP_NOWAIT); + + if (!d->control_block_base) { + kfree(d); + return NULL; + } + + /* + * Iterate over all frames, create a control block + * for each frame and link them together. + */ + for (frame = 0; frame < d->frames; frame++) { + struct bcm2835_dma_cb *control_block = + &d->control_block_base[frame]; + + /* Setup adresses */ + if (d->dir == DMA_DEV_TO_MEM) { + control_block->info = BCM2835_DMA_D_INC; + control_block->src = dev_addr; + control_block->dst = buf_addr + frame * period_len; + } else { + control_block->info = BCM2835_DMA_S_INC; + control_block->src = buf_addr + frame * period_len; + control_block->dst = dev_addr; + } + + /* Enable interrupt */ + control_block->info |= BCM2835_DMA_INT_EN; + + /* Setup synchronization */ + if (sync_type != 0) + control_block->info |= sync_type; + + /* Setup DREQ channel */ + if (c->dreq != 0) + control_block->info |= + BCM2835_DMA_PER_MAP(c->dreq); + + /* Length of a frame */ + control_block->length = period_len; + d->size += control_block->length; + + /* + * Next block is the next frame. + * This DMA engine driver currently only supports cyclic DMA. + * Therefore, wrap around at number of frames. + */ + control_block->next = d->control_block_base_phys + + sizeof(struct bcm2835_dma_cb) + * ((frame + 1) % d->frames); + } + + return vchan_tx_prep(&c->vc, &d->vd, flags); +} + +static int bcm2835_dma_slave_config(struct bcm2835_chan *c, + struct dma_slave_config *cfg) +{ + if ((cfg->direction == DMA_DEV_TO_MEM && + cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) || + (cfg->direction == DMA_MEM_TO_DEV && + cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) || + !is_slave_direction(cfg->direction)) { + return -EINVAL; + } + + c->cfg = *cfg; + + return 0; +} + +static int bcm2835_dma_terminate_all(struct bcm2835_chan *c) +{ + struct bcm2835_dmadev *d = to_bcm2835_dma_dev(c->vc.chan.device); + unsigned long flags; + int timeout = 10000; + LIST_HEAD(head); + + spin_lock_irqsave(&c->vc.lock, flags); + + /* Prevent this channel being scheduled */ + spin_lock(&d->lock); + list_del_init(&c->node); + spin_unlock(&d->lock); + + /* + * Stop DMA activity: we assume the callback will not be called + * after bcm_dma_abort() returns (even if it does, it will see + * c->desc is NULL and exit.) + */ + if (c->desc) { + c->desc = NULL; + bcm2835_dma_abort(c->chan_base); + + /* Wait for stopping */ + while (--timeout) { + if (!(readl(c->chan_base + BCM2835_DMA_CS) & + BCM2835_DMA_ACTIVE)) + break; + + cpu_relax(); + } + + if (!timeout) + dev_err(d->ddev.dev, "DMA transfer could not be terminated\n"); + } + + vchan_get_all_descriptors(&c->vc, &head); + spin_unlock_irqrestore(&c->vc.lock, flags); + vchan_dma_desc_free_list(&c->vc, &head); + + return 0; +} + +static int bcm2835_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + + switch (cmd) { + case DMA_SLAVE_CONFIG: + return bcm2835_dma_slave_config(c, + (struct dma_slave_config *)arg); + + case DMA_TERMINATE_ALL: + return bcm2835_dma_terminate_all(c); + + default: + return -ENXIO; + } +} + +static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id, int irq) +{ + struct bcm2835_chan *c; + + c = devm_kzalloc(d->ddev.dev, sizeof(*c), GFP_KERNEL); + if (!c) + return -ENOMEM; + + c->vc.desc_free = bcm2835_dma_desc_free; + vchan_init(&c->vc, &d->ddev); + INIT_LIST_HEAD(&c->node); + + d->ddev.chancnt++; + + c->chan_base = BCM2835_DMA_CHANIO(d->base, chan_id); + c->ch = chan_id; + c->irq_number = irq; + + return 0; +} + +static void bcm2835_dma_free(struct bcm2835_dmadev *od) +{ + struct bcm2835_chan *c, *next; + + list_for_each_entry_safe(c, next, &od->ddev.channels, + vc.chan.device_node) { + list_del(&c->vc.chan.device_node); + tasklet_kill(&c->vc.task); + } +} + +static const struct of_device_id bcm2835_dma_of_match[] = { + { .compatible = "brcm,bcm2835-dma", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match); + +static struct dma_chan *bcm2835_dma_xlate(struct of_phandle_args *spec, + struct of_dma *ofdma) +{ + struct bcm2835_dmadev *d = ofdma->of_dma_data; + struct dma_chan *chan; + + chan = dma_get_any_slave_channel(&d->ddev); + if (!chan) + return NULL; + + /* Set DREQ from param */ + to_bcm2835_dma_chan(chan)->dreq = spec->args[0]; + + return chan; +} + +static int bcm2835_dma_device_slave_caps(struct dma_chan *dchan, + struct dma_slave_caps *caps) +{ + caps->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); + caps->dstn_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); + caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); + caps->cmd_pause = false; + caps->cmd_terminate = true; + + return 0; +} + +static int bcm2835_dma_probe(struct platform_device *pdev) +{ + struct bcm2835_dmadev *od; + struct resource *res; + void __iomem *base; + int rc; + int i; + int irq; + uint32_t chans_available; + + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + + rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) + return rc; + + od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL); + if (!od) + return -ENOMEM; + + pdev->dev.dma_parms = &od->dma_parms; + dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + od->base = base; + + dma_cap_set(DMA_SLAVE, od->ddev.cap_mask); + dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask); + od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources; + od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources; + od->ddev.device_tx_status = bcm2835_dma_tx_status; + od->ddev.device_issue_pending = bcm2835_dma_issue_pending; + od->ddev.device_slave_caps = bcm2835_dma_device_slave_caps; + od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic; + od->ddev.device_control = bcm2835_dma_control; + od->ddev.dev = &pdev->dev; + INIT_LIST_HEAD(&od->ddev.channels); + spin_lock_init(&od->lock); + + platform_set_drvdata(pdev, od); + + /* Request DMA channel mask from device tree */ + if (of_property_read_u32(pdev->dev.of_node, + "brcm,dma-channel-mask", + &chans_available)) { + dev_err(&pdev->dev, "Failed to get channel mask\n"); + rc = -EINVAL; + goto err_no_dma; + } + + /* + * Do not use the FIQ and BULK channels, + * because they are used by the GPU. + */ + chans_available &= ~(BCM2835_DMA_FIQ_MASK | BCM2835_DMA_BULK_MASK); + + for (i = 0; i < pdev->num_resources; i++) { + irq = platform_get_irq(pdev, i); + if (irq < 0) + break; + + if (chans_available & (1 << i)) { + rc = bcm2835_dma_chan_init(od, i, irq); + if (rc) + goto err_no_dma; + } + } + + dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i); + + /* Device-tree DMA controller registration */ + rc = of_dma_controller_register(pdev->dev.of_node, + bcm2835_dma_xlate, od); + if (rc) { + dev_err(&pdev->dev, "Failed to register DMA controller\n"); + goto err_no_dma; + } + + rc = dma_async_device_register(&od->ddev); + if (rc) { + dev_err(&pdev->dev, + "Failed to register slave DMA engine device: %d\n", rc); + goto err_no_dma; + } + + dev_dbg(&pdev->dev, "Load BCM2835 DMA engine driver\n"); + + return 0; + +err_no_dma: + bcm2835_dma_free(od); + return rc; +} + +static int bcm2835_dma_remove(struct platform_device *pdev) +{ + struct bcm2835_dmadev *od = platform_get_drvdata(pdev); + + dma_async_device_unregister(&od->ddev); + bcm2835_dma_free(od); + + return 0; +} + +static struct platform_driver bcm2835_dma_driver = { + .probe = bcm2835_dma_probe, + .remove = bcm2835_dma_remove, + .driver = { + .name = "bcm2835-dma", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(bcm2835_dma_of_match), + }, +}; + +module_platform_driver(bcm2835_dma_driver); + +MODULE_ALIAS("platform:bcm2835-dma"); +MODULE_DESCRIPTION("BCM2835 DMA engine driver"); +MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>"); +MODULE_LICENSE("GPL v2"); |