summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/igb/e1000_82575.c5
-rw-r--r--drivers/net/igb/e1000_hw.h1
-rw-r--r--drivers/net/igb/e1000_regs.h1
-rw-r--r--drivers/net/igb/igb_main.c203
4 files changed, 163 insertions, 47 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 78971815bbce..b8a88a8b393f 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -875,6 +875,11 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw)
for (i = 0; i < mac->mta_reg_count; i++)
array_wr32(E1000_MTA, i, 0);
+ /* Zero out the Unicast HASH table */
+ hw_dbg("Zeroing the UTA\n");
+ for (i = 0; i < mac->uta_reg_count; i++)
+ array_wr32(E1000_UTA, i, 0);
+
/* Setup link and flow control */
ret_val = igb_setup_link(hw);
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index b1e0c0613a94..7b7898bc9348 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -340,6 +340,7 @@ struct e1000_mac_info {
u16 ifs_ratio;
u16 ifs_step_size;
u16 mta_reg_count;
+ u16 uta_reg_count;
/* Maximum size of the MTA register table in all supported adapters */
#define MAX_MTA_REG 128
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index 345d1442d6d6..76c338929f68 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -331,6 +331,7 @@ enum {
#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */
#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */
#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */
+#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */
#define E1000_IOVTCL 0x05BBC /* IOV Control Register */
/* These act per VF so an array friendly macro is used */
#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n)))
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index bb0aacd9961e..fdbe33228d62 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -106,6 +106,7 @@ static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
static struct net_device_stats *igb_get_stats(struct net_device *);
static int igb_change_mtu(struct net_device *, int);
static int igb_set_mac(struct net_device *, void *);
+static void igb_set_uta(struct igb_adapter *adapter);
static irqreturn_t igb_intr(int irq, void *);
static irqreturn_t igb_intr_msi(int irq, void *);
static irqreturn_t igb_msix_other(int irq, void *);
@@ -141,7 +142,6 @@ static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
reg_data = rd32(E1000_VMOLR(vfn));
reg_data |= E1000_VMOLR_BAM | /* Accept broadcast */
- E1000_VMOLR_ROPE | /* Accept packets matched in UTA */
E1000_VMOLR_ROMPE | /* Accept packets matched in MTA */
E1000_VMOLR_AUPE | /* Accept untagged packets */
E1000_VMOLR_STRVLAN; /* Strip vlan tags */
@@ -2286,6 +2286,9 @@ static void igb_configure_rx(struct igb_adapter *adapter)
/* Set the default pool for the PF's first queue */
igb_configure_vt_default_pool(adapter);
+ /* set UTA to appropriate mode */
+ igb_set_uta(adapter);
+
/* set the correct pool for the PF default MAC address in entry 0 */
igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
adapter->vfs_allocated_count);
@@ -2521,44 +2524,72 @@ static int igb_set_mac(struct net_device *netdev, void *p)
}
/**
- * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * igb_write_mc_addr_list - write multicast addresses to MTA
* @netdev: network interface device structure
*
- * The set_rx_mode entry point is called whenever the unicast or multicast
- * address lists or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper unicast, multicast,
- * promiscuous mode, and all-multi behavior.
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ * 0 on no addresses written
+ * X on writing X addresses to MTA
**/
-static void igb_set_rx_mode(struct net_device *netdev)
+static int igb_write_mc_addr_list(struct net_device *netdev)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- unsigned int rar_entries = hw->mac.rar_entry_count -
- (adapter->vfs_allocated_count + 1);
struct dev_mc_list *mc_ptr = netdev->mc_list;
- u8 *mta_list = NULL;
- u32 rctl;
+ u8 *mta_list;
+ u32 vmolr = 0;
int i;
- /* Check for Promiscuous and All Multicast modes */
- rctl = rd32(E1000_RCTL);
+ if (!netdev->mc_count) {
+ /* nothing to program, so clear mc list */
+ igb_update_mc_addr_list(hw, NULL, 0);
+ igb_restore_vf_multicasts(adapter);
+ return 0;
+ }
- if (netdev->flags & IFF_PROMISC) {
- rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
- rctl &= ~E1000_RCTL_VFE;
- } else {
- if (netdev->flags & IFF_ALLMULTI)
- rctl |= E1000_RCTL_MPE;
- else
- rctl &= ~E1000_RCTL_MPE;
+ mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC);
+ if (!mta_list)
+ return -ENOMEM;
- if (netdev->uc.count > rar_entries)
- rctl |= E1000_RCTL_UPE;
- else
- rctl &= ~E1000_RCTL_UPE;
- rctl |= E1000_RCTL_VFE;
+ /* set vmolr receive overflow multicast bit */
+ vmolr |= E1000_VMOLR_ROMPE;
+
+ /* The shared function expects a packed array of only addresses. */
+ mc_ptr = netdev->mc_list;
+
+ for (i = 0; i < netdev->mc_count; i++) {
+ if (!mc_ptr)
+ break;
+ memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
+ mc_ptr = mc_ptr->next;
}
- wr32(E1000_RCTL, rctl);
+ igb_update_mc_addr_list(hw, mta_list, i);
+ kfree(mta_list);
+
+ return netdev->mc_count;
+}
+
+/**
+ * igb_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ * 0 on no addresses written
+ * X on writing X addresses to the RAR table
+ **/
+static int igb_write_uc_addr_list(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->vfs_allocated_count;
+ unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
+ int count = 0;
+
+ /* return ENOMEM indicating insufficient memory for addresses */
+ if (netdev->uc.count > rar_entries)
+ return -ENOMEM;
if (netdev->uc.count && rar_entries) {
struct netdev_hw_addr *ha;
@@ -2567,7 +2598,8 @@ static void igb_set_rx_mode(struct net_device *netdev)
break;
igb_rar_set_qsel(adapter, ha->addr,
rar_entries--,
- adapter->vfs_allocated_count);
+ vfn);
+ count++;
}
}
/* write the addresses in reverse order to avoid write combining */
@@ -2577,29 +2609,79 @@ static void igb_set_rx_mode(struct net_device *netdev)
}
wrfl();
- if (!netdev->mc_count) {
- /* nothing to program, so clear mc list */
- igb_update_mc_addr_list(hw, NULL, 0);
- igb_restore_vf_multicasts(adapter);
- return;
+ return count;
+}
+
+/**
+ * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+static void igb_set_rx_mode(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->vfs_allocated_count;
+ u32 rctl, vmolr = 0;
+ int count;
+
+ /* Check for Promiscuous and All Multicast modes */
+ rctl = rd32(E1000_RCTL);
+
+ /* clear the effected bits */
+ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
+ } else {
+ if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= E1000_RCTL_MPE;
+ vmolr |= E1000_VMOLR_MPME;
+ } else {
+ /*
+ * Write addresses to the MTA, if the attempt fails
+ * then we should just turn on promiscous mode so
+ * that we can at least receive multicast traffic
+ */
+ count = igb_write_mc_addr_list(netdev);
+ if (count < 0) {
+ rctl |= E1000_RCTL_MPE;
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (count) {
+ vmolr |= E1000_VMOLR_ROMPE;
+ }
+ }
+ /*
+ * Write addresses to available RAR registers, if there is not
+ * sufficient space to store all the addresses then enable
+ * unicast promiscous mode
+ */
+ count = igb_write_uc_addr_list(netdev);
+ if (count < 0) {
+ rctl |= E1000_RCTL_UPE;
+ vmolr |= E1000_VMOLR_ROPE;
+ }
+ rctl |= E1000_RCTL_VFE;
}
+ wr32(E1000_RCTL, rctl);
- mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC);
- if (!mta_list) {
- dev_err(&adapter->pdev->dev,
- "failed to allocate multicast filter list\n");
+ /*
+ * In order to support SR-IOV and eventually VMDq it is necessary to set
+ * the VMOLR to enable the appropriate modes. Without this workaround
+ * we will have issues with VLAN tag stripping not being done for frames
+ * that are only arriving because we are the default pool
+ */
+ if (hw->mac.type < e1000_82576)
return;
- }
- /* The shared function expects a packed array of only addresses. */
- for (i = 0; i < netdev->mc_count; i++) {
- if (!mc_ptr)
- break;
- memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
- mc_ptr = mc_ptr->next;
- }
- igb_update_mc_addr_list(hw, mta_list, i);
- kfree(mta_list);
+ vmolr |= rd32(E1000_VMOLR(vfn)) &
+ ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
+ wr32(E1000_VMOLR(vfn), vmolr);
igb_restore_vf_multicasts(adapter);
}
@@ -4264,6 +4346,33 @@ static int igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
}
/**
+ * igb_set_uta - Set unicast filter table address
+ * @adapter: board private structure
+ *
+ * The unicast table address is a register array of 32-bit registers.
+ * The table is meant to be used in a way similar to how the MTA is used
+ * however due to certain limitations in the hardware it is necessary to
+ * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscous
+ * enable bit to allow vlan tag stripping when promiscous mode is enabled
+ **/
+static void igb_set_uta(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ /* The UTA table only exists on 82576 hardware and newer */
+ if (hw->mac.type < e1000_82576)
+ return;
+
+ /* we only need to do this if VMDq is enabled */
+ if (!adapter->vfs_allocated_count)
+ return;
+
+ for (i = 0; i < hw->mac.uta_reg_count; i++)
+ array_wr32(E1000_UTA, i, ~0);
+}
+
+/**
* igb_intr_msi - Interrupt Handler
* @irq: interrupt number
* @data: pointer to a network interface device structure
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 18:37:53 +0000