diff options
27 files changed, 2044 insertions, 3009 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 1baf9be3f8dd..b7adeed338d4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6334,9 +6334,7 @@ L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained -F: arch/arm/mach-spear*/clock.c -F: arch/arm/plat-spear/clock.c -F: arch/arm/plat-spear/include/plat/clock.h +F: drivers/clk/spear/ SPEAR PAD MULTIPLEXING SUPPORT M: Viresh Kumar <viresh.kumar@st.com> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2095a513a7c0..40ba2d1acde2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -981,6 +981,7 @@ config PLAT_SPEAR select ARM_AMBA select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select COMMON_CLK select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile index b24862489704..5b30d0d10892 100644 --- a/arch/arm/mach-spear3xx/Makefile +++ b/arch/arm/mach-spear3xx/Makefile @@ -3,7 +3,7 @@ # # common files -obj-y += spear3xx.o clock.o +obj-y += spear3xx.o # spear300 specific files obj-$(CONFIG_MACH_SPEAR300) += spear300.o diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c deleted file mode 100644 index 6c4841f55223..000000000000 --- a/arch/arm/mach-spear3xx/clock.c +++ /dev/null @@ -1,760 +0,0 @@ -/* - * arch/arm/mach-spear3xx/clock.c - * - * SPEAr3xx machines clock framework source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <asm/mach-types.h> -#include <plat/clock.h> -#include <mach/misc_regs.h> - -/* root clks */ -/* 32 KHz oscillator clock */ -static struct clk osc_32k_clk = { - .flags = ALWAYS_ENABLED, - .rate = 32000, -}; - -/* 24 MHz oscillator clock */ -static struct clk osc_24m_clk = { - .flags = ALWAYS_ENABLED, - .rate = 24000000, -}; - -/* clock derived from 32 KHz osc clk */ -/* rtc clock */ -static struct clk rtc_clk = { - .pclk = &osc_32k_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = RTC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from 24 MHz osc clk */ -/* pll masks structure */ -static struct pll_clk_masks pll1_masks = { - .mode_mask = PLL_MODE_MASK, - .mode_shift = PLL_MODE_SHIFT, - .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK, - .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT, - .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK, - .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT, - .div_p_mask = PLL_DIV_P_MASK, - .div_p_shift = PLL_DIV_P_SHIFT, - .div_n_mask = PLL_DIV_N_MASK, - .div_n_shift = PLL_DIV_N_SHIFT, -}; - -/* pll1 configuration structure */ -static struct pll_clk_config pll1_config = { - .mode_reg = PLL1_CTR, - .cfg_reg = PLL1_FRQ, - .masks = &pll1_masks, -}; - -/* pll rate configuration table, in ascending order of rates */ -struct pll_rate_tbl pll_rtbl[] = { - {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */ - {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */ -}; - -/* PLL1 clock */ -static struct clk pll1_clk = { - .flags = ENABLED_ON_INIT, - .pclk = &osc_24m_clk, - .en_reg = PLL1_CTR, - .en_reg_bit = PLL_ENABLE, - .calc_rate = &pll_calc_rate, - .recalc = &pll_clk_recalc, - .set_rate = &pll_clk_set_rate, - .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1}, - .private_data = &pll1_config, -}; - -/* PLL3 48 MHz clock */ -static struct clk pll3_48m_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_24m_clk, - .rate = 48000000, -}; - -/* watch dog timer clock */ -static struct clk wdt_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_24m_clk, - .recalc = &follow_parent, -}; - -/* clock derived from pll1 clk */ -/* cpu clock */ -static struct clk cpu_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .recalc = &follow_parent, -}; - -/* ahb masks structure */ -static struct bus_clk_masks ahb_masks = { - .mask = PLL_HCLK_RATIO_MASK, - .shift = PLL_HCLK_RATIO_SHIFT, -}; - -/* ahb configuration structure */ -static struct bus_clk_config ahb_config = { - .reg = CORE_CLK_CFG, - .masks = &ahb_masks, -}; - -/* ahb rate configuration table, in ascending order of rates */ -struct bus_rate_tbl bus_rtbl[] = { - {.div = 3}, /* == parent divided by 4 */ - {.div = 2}, /* == parent divided by 3 */ - {.div = 1}, /* == parent divided by 2 */ - {.div = 0}, /* == parent divided by 1 */ -}; - -/* ahb clock */ -static struct clk ahb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &ahb_config, -}; - -/* auxiliary synthesizers masks */ -static struct aux_clk_masks aux_masks = { - .eq_sel_mask = AUX_EQ_SEL_MASK, - .eq_sel_shift = AUX_EQ_SEL_SHIFT, - .eq1_mask = AUX_EQ1_SEL, - .eq2_mask = AUX_EQ2_SEL, - .xscale_sel_mask = AUX_XSCALE_MASK, - .xscale_sel_shift = AUX_XSCALE_SHIFT, - .yscale_sel_mask = AUX_YSCALE_MASK, - .yscale_sel_shift = AUX_YSCALE_SHIFT, -}; - -/* uart synth configurations */ -static struct aux_clk_config uart_synth_config = { - .synth_reg = UART_CLK_SYNT, - .masks = &aux_masks, -}; - -/* aux rate configuration table, in ascending order of rates */ -struct aux_rate_tbl aux_rtbl[] = { - /* For PLL1 = 332 MHz */ - {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */ - {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */ - {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ -}; - -/* uart synth clock */ -static struct clk uart_synth_clk = { - .en_reg = UART_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1}, - .private_data = &uart_synth_config, -}; - -/* uart parents */ -static struct pclk_info uart_pclk_info[] = { - { - .pclk = &uart_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* uart parent select structure */ -static struct pclk_sel uart_pclk_sel = { - .pclk_info = uart_pclk_info, - .pclk_count = ARRAY_SIZE(uart_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = UART_CLK_MASK, -}; - -/* uart clock */ -static struct clk uart_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = UART_CLK_ENB, - .pclk_sel = &uart_pclk_sel, - .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* firda configurations */ -static struct aux_clk_config firda_synth_config = { - .synth_reg = FIRDA_CLK_SYNT, - .masks = &aux_masks, -}; - -/* firda synth clock */ -static struct clk firda_synth_clk = { - .en_reg = FIRDA_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1}, - .private_data = &firda_synth_config, -}; - -/* firda parents */ -static struct pclk_info firda_pclk_info[] = { - { - .pclk = &firda_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* firda parent select structure */ -static struct pclk_sel firda_pclk_sel = { - .pclk_info = firda_pclk_info, - .pclk_count = ARRAY_SIZE(firda_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = FIRDA_CLK_MASK, -}; - -/* firda clock */ -static struct clk firda_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = FIRDA_CLK_ENB, - .pclk_sel = &firda_pclk_sel, - .pclk_sel_shift = FIRDA_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt synthesizer masks */ -static struct gpt_clk_masks gpt_masks = { - .mscale_sel_mask = GPT_MSCALE_MASK, - .mscale_sel_shift = GPT_MSCALE_SHIFT, - .nscale_sel_mask = GPT_NSCALE_MASK, - .nscale_sel_shift = GPT_NSCALE_SHIFT, -}; - -/* gpt rate configuration table, in ascending order of rates */ -struct gpt_rate_tbl gpt_rtbl[] = { - /* For pll1 = 332 MHz */ - {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ - {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ - {.mscale = 1, .nscale = 0}, /* 83 MHz */ -}; - -/* gpt0 synth clk config*/ -static struct gpt_clk_config gpt0_synth_config = { - .synth_reg = PRSC1_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt0_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt0_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt0_pclk_info[] = { - { - .pclk = &gpt0_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt0_pclk_sel = { - .pclk_info = gpt0_pclk_info, - .pclk_count = ARRAY_SIZE(gpt0_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt0 timer clock */ -static struct clk gpt0_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt0_pclk_sel, - .pclk_sel_shift = GPT0_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt1 synth clk configurations */ -static struct gpt_clk_config gpt1_synth_config = { - .synth_reg = PRSC2_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt1 synth clock */ -static struct clk gpt1_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt1_synth_config, -}; - -static struct pclk_info gpt1_pclk_info[] = { - { - .pclk = &gpt1_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt1_pclk_sel = { - .pclk_info = gpt1_pclk_info, - .pclk_count = ARRAY_SIZE(gpt1_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt1 timer clock */ -static struct clk gpt1_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPT1_CLK_ENB, - .pclk_sel = &gpt1_pclk_sel, - .pclk_sel_shift = GPT1_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt2 synth clk configurations */ -static struct gpt_clk_config gpt2_synth_config = { - .synth_reg = PRSC3_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt1 synth clock */ -static struct clk gpt2_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt2_synth_config, -}; - -static struct pclk_info gpt2_pclk_info[] = { - { - .pclk = &gpt2_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt2_pclk_sel = { - .pclk_info = gpt2_pclk_info, - .pclk_count = ARRAY_SIZE(gpt2_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt2 timer clock */ -static struct clk gpt2_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPT2_CLK_ENB, - .pclk_sel = &gpt2_pclk_sel, - .pclk_sel_shift = GPT2_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* clock derived from pll3 clk */ -/* usbh clock */ -static struct clk usbh_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBH_CLK_ENB, - .recalc = &follow_parent, -}; - -/* usbd clock */ -static struct clk usbd_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBD_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from ahb clk */ -/* apb masks structure */ -static struct bus_clk_masks apb_masks = { - .mask = HCLK_PCLK_RATIO_MASK, - .shift = HCLK_PCLK_RATIO_SHIFT, -}; - -/* apb configuration structure */ -static struct bus_clk_config apb_config = { - .reg = CORE_CLK_CFG, - .masks = &apb_masks, -}; - -/* apb clock */ -static struct clk apb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &apb_config, -}; - -/* i2c clock */ -static struct clk i2c_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = I2C_CLK_ENB, - .recalc = &follow_parent, -}; - -/* dma clock */ -static struct clk dma_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = DMA_CLK_ENB, - .recalc = &follow_parent, -}; - -/* jpeg clock */ -static struct clk jpeg_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = JPEG_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gmac clock */ -static struct clk gmac_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GMAC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* smi clock */ -static struct clk smi_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SMI_CLK_ENB, - .recalc = &follow_parent, -}; - -/* c3 clock */ -static struct clk c3_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = C3_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from apb clk */ -/* adc clock */ -static struct clk adc_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = ADC_CLK_ENB, - .recalc = &follow_parent, -}; - -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -/* emi clock */ -static struct clk emi_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; -#endif - -/* ssp clock */ -static struct clk ssp0_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gpio clock */ -static struct clk gpio_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPIO_CLK_ENB, - .recalc = &follow_parent, -}; - -static struct clk dummy_apb_pclk; - -#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \ - defined(CONFIG_MACH_SPEAR320) -/* fsmc clock */ -static struct clk fsmc_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; -#endif - -/* common clocks to spear310 and spear320 */ -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -/* uart1 clock */ -static struct clk uart1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* uart2 clock */ -static struct clk uart2_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; -#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */ - -/* common clocks to spear300 and spear320 */ -#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320) -/* clcd clock */ -static struct clk clcd_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll3_48m_clk, - .recalc = &follow_parent, -}; - -/* sdhci clock */ -static struct clk sdhci_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; -#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */ - -/* spear300 machine specific clock structures */ -#ifdef CONFIG_MACH_SPEAR300 -/* gpio1 clock */ -static struct clk gpio1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* keyboard clock */ -static struct clk kbd_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -#endif - -/* spear310 machine specific clock structures */ -#ifdef CONFIG_MACH_SPEAR310 -/* uart3 clock */ -static struct clk uart3_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* uart4 clock */ -static struct clk uart4_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* uart5 clock */ -static struct clk uart5_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; -#endif - -/* spear320 machine specific clock structures */ -#ifdef CONFIG_MACH_SPEAR320 -/* can0 clock */ -static struct clk can0_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* can1 clock */ -static struct clk can1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* i2c1 clock */ -static struct clk i2c1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; - -/* ssp1 clock */ -static struct clk ssp1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* ssp2 clock */ -static struct clk ssp2_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* pwm clock */ -static struct clk pwm_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; -#endif - -/* array of all spear 3xx clock lookups */ -static struct clk_lookup spear_clk_lookups[] = { - { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, - /* root clks */ - { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, - { .con_id = "osc_24m_clk", .clk = &osc_24m_clk}, - /* clock derived from 32 KHz osc clk */ - { .dev_id = "rtc-spear", .clk = &rtc_clk}, - /* clock derived from 24 MHz osc clk */ - { .con_id = "pll1_clk", .clk = &pll1_clk}, - { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, - { .dev_id = "wdt", .clk = &wdt_clk}, - /* clock derived from pll1 clk */ - { .con_id = "cpu_clk", .clk = &cpu_clk}, - { .con_id = "ahb_clk", .clk = &ahb_clk}, - { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, - { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, - { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, - { .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk}, - { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, - { .dev_id = "uart", .clk = &uart_clk}, - { .dev_id = "firda", .clk = &firda_clk}, - { .dev_id = "gpt0", .clk = &gpt0_clk}, - { .dev_id = "gpt1", .clk = &gpt1_clk}, - { .dev_id = "gpt2", .clk = &gpt2_clk}, - /* clock derived from pll3 clk */ - { .dev_id = "designware_udc", .clk = &usbd_clk}, - { .con_id = "usbh_clk", .clk = &usbh_clk}, - /* clock derived from ahb clk */ - { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "i2c_designware.0", .clk = &i2c_clk}, - { .dev_id = "dma", .clk = &dma_clk}, - { .dev_id = "jpeg", .clk = &jpeg_clk}, - { .dev_id = "gmac", .clk = &gmac_clk}, - { .dev_id = "smi", .clk = &smi_clk}, - { .dev_id = "c3", .clk = &c3_clk}, - /* clock derived from apb clk */ - { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, - { .dev_id = "gpio", .clk = &gpio_clk}, -}; - -/* array of all spear 300 clock lookups */ -#ifdef CONFIG_MACH_SPEAR300 -static struct clk_lookup spear300_clk_lookups[] = { - { .dev_id = "clcd", .clk = &clcd_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .dev_id = "gpio1", .clk = &gpio1_clk}, - { .dev_id = "keyboard", .clk = &kbd_clk}, - { .dev_id = "sdhci", .clk = &sdhci_clk}, -}; -#endif - -/* array of all spear 310 clock lookups */ -#ifdef CONFIG_MACH_SPEAR310 -static struct clk_lookup spear310_clk_lookups[] = { - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .con_id = "emi", .clk = &emi_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, - { .dev_id = "uart2", .clk = &uart2_clk}, - { .dev_id = "uart3", .clk = &uart3_clk}, - { .dev_id = "uart4", .clk = &uart4_clk}, - { .dev_id = "uart5", .clk = &uart5_clk}, -}; -#endif - -/* array of all spear 320 clock lookups */ -#ifdef CONFIG_MACH_SPEAR320 -static struct clk_lookup spear320_clk_lookups[] = { - { .dev_id = "clcd", .clk = &clcd_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .dev_id = "i2c_designware.1", .clk = &i2c1_clk}, - { .con_id = "emi", .clk = &emi_clk}, - { .dev_id = "pwm", .clk = &pwm_clk}, - { .dev_id = "sdhci", .clk = &sdhci_clk}, - { .dev_id = "c_can_platform.0", .clk = &can0_clk}, - { .dev_id = "c_can_platform.1", .clk = &can1_clk}, - { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, - { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, - { .dev_id = "uart2", .clk = &uart2_clk}, -}; -#endif - -void __init spear3xx_clk_init(void) -{ - int i, cnt; - struct clk_lookup *lookups; - - if (machine_is_spear300()) { - cnt = ARRAY_SIZE(spear300_clk_lookups); - lookups = spear300_clk_lookups; - } else if (machine_is_spear310()) { - cnt = ARRAY_SIZE(spear310_clk_lookups); - lookups = spear310_clk_lookups; - } else { - cnt = ARRAY_SIZE(spear320_clk_lookups); - lookups = spear320_clk_lookups; - } - - for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) - clk_register(&spear_clk_lookups[i]); - - for (i = 0; i < cnt; i++) - clk_register(&lookups[i]); - - clk_init(); -} diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 14276e5a98d2..15c107aad202 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -36,8 +36,8 @@ extern struct amba_device spear3xx_uart_device; extern struct sys_timer spear3xx_timer; /* Add spear3xx family function declarations here */ -void __init spear3xx_clk_init(void); void __init spear_setup_timer(void); +void __init spear3xx_clk_init(void); void __init spear3xx_map_io(void); void __init spear3xx_init_irq(void); void __init spear3xx_init(void); @@ -156,7 +156,6 @@ extern struct pmx_dev spear310_pmx_tdm0; /* Add spear310 machine function declarations here */ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, u8 pmx_dev_count); - #endif /* CONFIG_MACH_SPEAR310 */ /* spear320 declarations */ diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index 5bd8cd8d4852..50cfe0d1a7c4 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -15,150 +15,8 @@ #define __MACH_MISC_REGS_H #include <mach/hardware.h> +#include <mach/spear.h> #define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE) -#define SOC_CFG_CTR (MISC_BASE + 0x000) -#define DIAG_CFG_CTR (MISC_BASE + 0x004) -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 11 -#define GPT2_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART_CLK_ENB 3 -#define SSP_CLK_ENB 5 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FIRDA_CLK_ENB 10 -#define GPT1_CLK_ENB 11 -#define GPT2_CLK_ENB 12 -#define ADC_CLK_ENB 15 -#define RTC_CLK_ENB 17 -#define GPIO_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH_CLK_ENB 25 -#define C3_CLK_ENB 31 - -#define SOC_CORE_ID (MISC_BASE + 0x030) -#define RAS_CLK_ENB (MISC_BASE + 0x034) -#define PERIP1_SOF_RST (MISC_BASE + 0x038) -/* PERIP1_SOF_RST register masks */ -#define JPEG_SOF_RST 8 - -#define SOC_USER_ID (MISC_BASE + 0x03C) -#define RAS_SOF_RST (MISC_BASE + 0x040) -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -#define ICM1_ARB_CFG (MISC_BASE + 0x07C) -#define ICM2_ARB_CFG (MISC_BASE + 0x080) -#define ICM3_ARB_CFG (MISC_BASE + 0x084) -#define ICM4_ARB_CFG (MISC_BASE + 0x088) -#define ICM5_ARB_CFG (MISC_BASE + 0x08C) -#define ICM6_ARB_CFG (MISC_BASE + 0x090) -#define ICM7_ARB_CFG (MISC_BASE + 0x094) -#define ICM8_ARB_CFG (MISC_BASE + 0x098) -#define ICM9_ARB_CFG (MISC_BASE + 0x09C) -#define DMA_CHN_CFG (MISC_BASE + 0x0A0) -#define USB2_PHY_CFG (MISC_BASE + 0x0A4) -#define GMAC_CFG_CTR (MISC_BASE + 0x0A8) -#define EXPI_CFG_CTR (MISC_BASE + 0x0AC) -#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0) -#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4) -#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8) -#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC) -#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0) -#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4) -#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8) -#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC) -#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0) -#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4) -#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8) -#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC) -#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0) -#define BIST1_CFG_CTR (MISC_BASE + 0x0F4) -#define BIST2_CFG_CTR (MISC_BASE + 0x0F8) -#define BIST3_CFG_CTR (MISC_BASE + 0x0FC) -#define BIST4_CFG_CTR (MISC_BASE + 0x100) -#define BIST5_CFG_CTR (MISC_BASE + 0x104) -#define BIST1_STS_RES (MISC_BASE + 0x108) -#define BIST2_STS_RES (MISC_BASE + 0x10C) -#define BIST3_STS_RES (MISC_BASE + 0x110) -#define BIST4_STS_RES (MISC_BASE + 0x114) -#define BIST5_STS_RES (MISC_BASE + 0x118) -#define SYSERR_CFG_CTR (MISC_BASE + 0x11C) - #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 63fd98356919..881109522060 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -78,4 +78,17 @@ #define SPEAR_SYS_CTRL_BASE SPEAR3XX_ICM3_SYS_CTRL_BASE #define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR3XX_ICM3_SYS_CTRL_BASE +/* SPEAr320 Macros */ +#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) +#define VA_SPEAR320_SOC_CONFIG_BASE UL(0xFE000000) +#define SPEAR320_CONTROL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE) +#define SPEAR320_EXT_CTRL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018) + #define SPEAR320_UARTX_PCLK_MASK 0x1 + #define SPEAR320_UART2_PCLK_SHIFT 8 + #define SPEAR320_UART3_PCLK_SHIFT 9 + #define SPEAR320_UART4_PCLK_SHIFT 10 + #define SPEAR320_UART5_PCLK_SHIFT 11 + #define SPEAR320_UART6_PCLK_SHIFT 12 + #define SPEAR320_RS485_PCLK_SHIFT 13 + #endif /* __MACH_SPEAR3XX_H */ diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index deaaf199612c..bfdad554319c 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -16,6 +16,7 @@ #include <plat/shirq.h> #include <mach/generic.h> #include <mach/hardware.h> +#include <mach/spear.h> /* pad multiplexing support */ /* muxing registers */ diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index b1733c37f209..2625ab9a6c8b 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -511,6 +511,8 @@ static void __init spear3xx_timer_init(void) char pclk_name[] = "pll3_48m_clk"; struct clk *gpt_clk, *pclk; + spear3xx_clk_init(); + /* get the system timer clock */ gpt_clk = clk_get_sys("gpt0", NULL); if (IS_ERR(gpt_clk)) { diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile index 76e5750552fc..898831d93f37 100644 --- a/arch/arm/mach-spear6xx/Makefile +++ b/arch/arm/mach-spear6xx/Makefile @@ -3,4 +3,4 @@ # # common files -obj-y += clock.o spear6xx.o +obj-y += spear6xx.o diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c deleted file mode 100644 index a86499a8a15f..000000000000 --- a/arch/arm/mach-spear6xx/clock.c +++ /dev/null @@ -1,683 +0,0 @@ -/* - * arch/arm/mach-spear6xx/clock.c - * - * SPEAr6xx machines clock framework source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <plat/clock.h> -#include <mach/misc_regs.h> - -/* root clks */ -/* 32 KHz oscillator clock */ -static struct clk osc_32k_clk = { - .flags = ALWAYS_ENABLED, - .rate = 32000, -}; - -/* 30 MHz oscillator clock */ -static struct clk osc_30m_clk = { - .flags = ALWAYS_ENABLED, - .rate = 30000000, -}; - -/* clock derived from 32 KHz osc clk */ -/* rtc clock */ -static struct clk rtc_clk = { - .pclk = &osc_32k_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = RTC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from 30 MHz osc clk */ -/* pll masks structure */ -static struct pll_clk_masks pll1_masks = { - .mode_mask = PLL_MODE_MASK, - .mode_shift = PLL_MODE_SHIFT, - .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK, - .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT, - .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK, - .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT, - .div_p_mask = PLL_DIV_P_MASK, - .div_p_shift = PLL_DIV_P_SHIFT, - .div_n_mask = PLL_DIV_N_MASK, - .div_n_shift = PLL_DIV_N_SHIFT, -}; - -/* pll1 configuration structure */ -static struct pll_clk_config pll1_config = { - .mode_reg = PLL1_CTR, - .cfg_reg = PLL1_FRQ, - .masks = &pll1_masks, -}; - -/* pll rate configuration table, in ascending order of rates */ -struct pll_rate_tbl pll_rtbl[] = { - {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */ - {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */ -}; - -/* PLL1 clock */ -static struct clk pll1_clk = { - .flags = ENABLED_ON_INIT, - .pclk = &osc_30m_clk, - .en_reg = PLL1_CTR, - .en_reg_bit = PLL_ENABLE, - .calc_rate = &pll_calc_rate, - .recalc = &pll_clk_recalc, - .set_rate = &pll_clk_set_rate, - .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1}, - .private_data = &pll1_config, -}; - -/* PLL3 48 MHz clock */ -static struct clk pll3_48m_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_30m_clk, - .rate = 48000000, -}; - -/* watch dog timer clock */ -static struct clk wdt_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_30m_clk, - .recalc = &follow_parent, -}; - -/* clock derived from pll1 clk */ -/* cpu clock */ -static struct clk cpu_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .recalc = &follow_parent, -}; - -/* ahb masks structure */ -static struct bus_clk_masks ahb_masks = { - .mask = PLL_HCLK_RATIO_MASK, - .shift = PLL_HCLK_RATIO_SHIFT, -}; - -/* ahb configuration structure */ -static struct bus_clk_config ahb_config = { - .reg = CORE_CLK_CFG, - .masks = &ahb_masks, -}; - -/* ahb rate configuration table, in ascending order of rates */ -struct bus_rate_tbl bus_rtbl[] = { - {.div = 3}, /* == parent divided by 4 */ - {.div = 2}, /* == parent divided by 3 */ - {.div = 1}, /* == parent divided by 2 */ - {.div = 0}, /* == parent divided by 1 */ -}; - -/* ahb clock */ -static struct clk ahb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &ahb_config, -}; - -/* auxiliary synthesizers masks */ -static struct aux_clk_masks aux_masks = { - .eq_sel_mask = AUX_EQ_SEL_MASK, - .eq_sel_shift = AUX_EQ_SEL_SHIFT, - .eq1_mask = AUX_EQ1_SEL, - .eq2_mask = AUX_EQ2_SEL, - .xscale_sel_mask = AUX_XSCALE_MASK, - .xscale_sel_shift = AUX_XSCALE_SHIFT, - .yscale_sel_mask = AUX_YSCALE_MASK, - .yscale_sel_shift = AUX_YSCALE_SHIFT, -}; - -/* uart configurations */ -static struct aux_clk_config uart_synth_config = { - .synth_reg = UART_CLK_SYNT, - .masks = &aux_masks, -}; - -/* aux rate configuration table, in ascending order of rates */ -struct aux_rate_tbl aux_rtbl[] = { - /* For PLL1 = 332 MHz */ - {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */ - {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */ - {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ -}; - -/* uart synth clock */ -static struct clk uart_synth_clk = { - .en_reg = UART_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, - .private_data = &uart_synth_config, -}; - -/* uart parents */ -static struct pclk_info uart_pclk_info[] = { - { - .pclk = &uart_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* uart parent select structure */ -static struct pclk_sel uart_pclk_sel = { - .pclk_info = uart_pclk_info, - .pclk_count = ARRAY_SIZE(uart_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = UART_CLK_MASK, -}; - -/* uart0 clock */ -static struct clk uart0_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = UART0_CLK_ENB, - .pclk_sel = &uart_pclk_sel, - .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* uart1 clock */ -static struct clk uart1_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = UART1_CLK_ENB, - .pclk_sel = &uart_pclk_sel, - .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* firda configurations */ -static struct aux_clk_config firda_synth_config = { - .synth_reg = FIRDA_CLK_SYNT, - .masks = &aux_masks, -}; - -/* firda synth clock */ -static struct clk firda_synth_clk = { - .en_reg = FIRDA_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, - .private_data = &firda_synth_config, -}; - -/* firda parents */ -static struct pclk_info firda_pclk_info[] = { - { - .pclk = &firda_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* firda parent select structure */ -static struct pclk_sel firda_pclk_sel = { - .pclk_info = firda_pclk_info, - .pclk_count = ARRAY_SIZE(firda_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = FIRDA_CLK_MASK, -}; - -/* firda clock */ -static struct clk firda_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = FIRDA_CLK_ENB, - .pclk_sel = &firda_pclk_sel, - .pclk_sel_shift = FIRDA_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* clcd configurations */ -static struct aux_clk_config clcd_synth_config = { - .synth_reg = CLCD_CLK_SYNT, - .masks = &aux_masks, -}; - -/* firda synth clock */ -static struct clk clcd_synth_clk = { - .en_reg = CLCD_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, - .private_data = &clcd_synth_config, -}; - -/* clcd parents */ -static struct pclk_info clcd_pclk_info[] = { - { - .pclk = &clcd_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* clcd parent select structure */ -static struct pclk_sel clcd_pclk_sel = { - .pclk_info = clcd_pclk_info, - .pclk_count = ARRAY_SIZE(clcd_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = CLCD_CLK_MASK, -}; - -/* clcd clock */ -static struct clk clcd_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = CLCD_CLK_ENB, - .pclk_sel = &clcd_pclk_sel, - .pclk_sel_shift = CLCD_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt synthesizer masks */ -static struct gpt_clk_masks gpt_masks = { - .mscale_sel_mask = GPT_MSCALE_MASK, - .mscale_sel_shift = GPT_MSCALE_SHIFT, - .nscale_sel_mask = GPT_NSCALE_MASK, - .nscale_sel_shift = GPT_NSCALE_SHIFT, -}; - -/* gpt rate configuration table, in ascending order of rates */ -struct gpt_rate_tbl gpt_rtbl[] = { - /* For pll1 = 332 MHz */ - {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ - {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ - {.mscale = 1, .nscale = 0}, /* 83 MHz */ -}; - -/* gpt0 synth clk config*/ -static struct gpt_clk_config gpt0_synth_config = { - .synth_reg = PRSC1_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt0_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt0_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt0_pclk_info[] = { - { - .pclk = &gpt0_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt0_pclk_sel = { - .pclk_info = gpt0_pclk_info, - .pclk_count = ARRAY_SIZE(gpt0_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt0 ARM1 subsystem timer clock */ -static struct clk gpt0_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt0_pclk_sel, - .pclk_sel_shift = GPT0_CLK_SHIFT, - .recalc = &follow_parent, -}; - - -/* Note: gpt0 and gpt1 share same parent clocks */ -/* gpt parent select structure */ -static struct pclk_sel gpt1_pclk_sel = { - .pclk_info = gpt0_pclk_info, - .pclk_count = ARRAY_SIZE(gpt0_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt1 timer clock */ -static struct clk gpt1_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt1_pclk_sel, - .pclk_sel_shift = GPT1_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt2 synth clk config*/ -static struct gpt_clk_config gpt2_synth_config = { - .synth_reg = PRSC2_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt2_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt2_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt2_pclk_info[] = { - { - .pclk = &gpt2_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt2_pclk_sel = { - .pclk_info = gpt2_pclk_info, - .pclk_count = ARRAY_SIZE(gpt2_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt2 timer clock */ -static struct clk gpt2_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt2_pclk_sel, - .pclk_sel_shift = GPT2_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt3 synth clk config*/ -static struct gpt_clk_config gpt3_synth_config = { - .synth_reg = PRSC3_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt3_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt3_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt3_pclk_info[] = { - { - .pclk = &gpt3_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt3_pclk_sel = { - .pclk_info = gpt3_pclk_info, - .pclk_count = ARRAY_SIZE(gpt3_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt3 timer clock */ -static struct clk gpt3_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt3_pclk_sel, - .pclk_sel_shift = GPT3_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* clock derived from pll3 clk */ -/* usbh0 clock */ -static struct clk usbh0_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBH0_CLK_ENB, - .recalc = &follow_parent, -}; - -/* usbh1 clock */ -static struct clk usbh1_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBH1_CLK_ENB, - .recalc = &follow_parent, -}; - -/* usbd clock */ -static struct clk usbd_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBD_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from ahb clk */ -/* apb masks structure */ -static struct bus_clk_masks apb_masks = { - .mask = HCLK_PCLK_RATIO_MASK, - .shift = HCLK_PCLK_RATIO_SHIFT, -}; - -/* apb configuration structure */ -static struct bus_clk_config apb_config = { - .reg = CORE_CLK_CFG, - .masks = &apb_masks, -}; - -/* apb clock */ -static struct clk apb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &apb_config, -}; - -/* i2c clock */ -static struct clk i2c_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = I2C_CLK_ENB, - .recalc = &follow_parent, -}; - -/* dma clock */ -static struct clk dma_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = DMA_CLK_ENB, - .recalc = &follow_parent, -}; - -/* jpeg clock */ -static struct clk jpeg_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = JPEG_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gmac clock */ -static struct clk gmac_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GMAC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* smi clock */ -static struct clk smi_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SMI_CLK_ENB, - .recalc = &follow_parent, -}; - -/* fsmc clock */ -static struct clk fsmc_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = FSMC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from apb clk */ -/* adc clock */ -static struct clk adc_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = ADC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* ssp0 clock */ -static struct clk ssp0_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP0_CLK_ENB, - .recalc = &follow_parent, -}; - -/* ssp1 clock */ -static struct clk ssp1_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP1_CLK_ENB, - .recalc = &follow_parent, -}; - -/* ssp2 clock */ -static struct clk ssp2_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP2_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gpio0 ARM subsystem clock */ -static struct clk gpio0_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* gpio1 clock */ -static struct clk gpio1_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPIO1_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gpio2 clock */ -static struct clk gpio2_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPIO2_CLK_ENB, - .recalc = &follow_parent, -}; - -static struct clk dummy_apb_pclk; - -/* array of all spear 6xx clock lookups */ -static struct clk_lookup spear_clk_lookups[] = { - { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, - /* root clks */ - { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, - { .con_id = "osc_30m_clk", .clk = &osc_30m_clk}, - /* clock derived from 32 KHz os clk */ - { .dev_id = "rtc-spear", .clk = &rtc_clk}, - /* clock derived from 30 MHz os clk */ - { .con_id = "pll1_clk", .clk = &pll1_clk}, - { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, - { .dev_id = "wdt", .clk = &wdt_clk}, - /* clock derived from pll1 clk */ - { .con_id = "cpu_clk", .clk = &cpu_clk}, - { .con_id = "ahb_clk", .clk = &ahb_clk}, - { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, - { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, - { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk}, - { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, - { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, - { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk}, - { .dev_id = "d0000000.serial", .clk = &uart0_clk}, - { .dev_id = "d0080000.serial", .clk = &uart1_clk}, - { .dev_id = "firda", .clk = &firda_clk}, - { .dev_id = "clcd", .clk = &clcd_clk}, - { .dev_id = "gpt0", .clk = &gpt0_clk}, - { .dev_id = "gpt1", .clk = &gpt1_clk}, - { .dev_id = "gpt2", .clk = &gpt2_clk}, - { .dev_id = "gpt3", .clk = &gpt3_clk}, - /* clock derived from pll3 clk */ - { .dev_id = "designware_udc", .clk = &usbd_clk}, - { .con_id = "usbh.0_clk", .clk = &usbh0_clk}, - { .con_id = "usbh.1_clk", .clk = &usbh1_clk}, - /* clock derived from ahb clk */ - { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "d0200000.i2c", .clk = &i2c_clk}, - { .dev_id = "dma", .clk = &dma_clk}, - { .dev_id = "jpeg", .clk = &jpeg_clk}, - { .dev_id = "gmac", .clk = &gmac_clk}, - { .dev_id = "smi", .clk = &smi_clk}, - { .dev_id = "fsmc-nand", .clk = &fsmc_clk}, - /* clock derived from apb clk */ - { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, - { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, - { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "f0100000.gpio", .clk = &gpio0_clk}, - { .dev_id = "fc980000.gpio", .clk = &gpio1_clk}, - { .dev_id = "d8100000.gpio", .clk = &gpio2_clk}, -}; - -void __init spear6xx_clk_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) - clk_register(&spear_clk_lookups[i]); - - clk_init(); -} diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index 68c20a007b0d..633074fddf9a 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -15,160 +15,8 @@ #define __MACH_MISC_REGS_H #include <mach/hardware.h> +#include <mach/spear.h> #define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE) -#define SOC_CFG_CTR (MISC_BASE + 0x000) -#define DIAG_CFG_CTR (MISC_BASE + 0x004) -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define CLCD_CLK_SHIFT 2 -#define CLCD_CLK_MASK 0x3 -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 10 -#define GPT2_CLK_SHIFT 11 -#define GPT3_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART0_CLK_ENB 3 -#define UART1_CLK_ENB 4 -#define SSP0_CLK_ENB 5 -#define SSP1_CLK_ENB 6 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FSMC_CLK_ENB 9 -#define FIRDA_CLK_ENB 10 -#define GPT2_CLK_ENB 11 -#define GPT3_CLK_ENB 12 -#define GPIO2_CLK_ENB 13 -#define SSP2_CLK_ENB 14 -#define ADC_CLK_ENB 15 -#define GPT1_CLK_ENB 11 -#define RTC_CLK_ENB 17 -#define GPIO1_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define CLCD_CLK_ENB 22 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH0_CLK_ENB 25 -#define USBH1_CLK_ENB 26 - -#define SOC_CORE_ID (MISC_BASE + 0x030) -#define RAS_CLK_ENB (MISC_BASE + 0x034) -#define PERIP1_SOF_RST (MISC_BASE + 0x038) -/* PERIP1_SOF_RST register masks */ -#define JPEG_SOF_RST 8 - -#define SOC_USER_ID (MISC_BASE + 0x03C) -#define RAS_SOF_RST (MISC_BASE + 0x040) -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -#define ICM1_ARB_CFG (MISC_BASE + 0x07C) -#define ICM2_ARB_CFG (MISC_BASE + 0x080) -#define ICM3_ARB_CFG (MISC_BASE + 0x084) -#define ICM4_ARB_CFG (MISC_BASE + 0x088) -#define ICM5_ARB_CFG (MISC_BASE + 0x08C) -#define ICM6_ARB_CFG (MISC_BASE + 0x090) -#define ICM7_ARB_CFG (MISC_BASE + 0x094) -#define ICM8_ARB_CFG (MISC_BASE + 0x098) -#define ICM9_ARB_CFG (MISC_BASE + 0x09C) -#define DMA_CHN_CFG (MISC_BASE + 0x0A0) -#define USB2_PHY_CFG (MISC_BASE + 0x0A4) -#define GMAC_CFG_CTR (MISC_BASE + 0x0A8) -#define EXPI_CFG_CTR (MISC_BASE + 0x0AC) -#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0) -#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4) -#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8) -#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC) -#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0) -#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4) -#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8) -#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC) -#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0) -#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4) -#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8) -#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC) -#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0) -#define BIST1_CFG_CTR (MISC_BASE + 0x0F4) -#define BIST2_CFG_CTR (MISC_BASE + 0x0F8) -#define BIST3_CFG_CTR (MISC_BASE + 0x0FC) -#define BIST4_CFG_CTR (MISC_BASE + 0x100) -#define BIST5_CFG_CTR (MISC_BASE + 0x104) -#define BIST1_STS_RES (MISC_BASE + 0x108) -#define BIST2_STS_RES (MISC_BASE + 0x10C) -#define BIST3_STS_RES (MISC_BASE + 0x110) -#define BIST4_STS_RES (MISC_BASE + 0x114) -#define BIST5_STS_RES (MISC_BASE + 0x118) -#define SYSERR_CFG_CTR (MISC_BASE + 0x11C) - #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 2ed8b14c82c8..771e19e3c43c 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -56,9 +56,6 @@ static struct map_desc spear6xx_io_desc[] __initdata = { void __init spear6xx_map_io(void) { iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc)); - - /* This will initialize clock framework */ - spear6xx_clk_init(); } static void __init spear6xx_timer_init(void) @@ -66,6 +63,8 @@ static void __init spear6xx_timer_init(void) char pclk_name[] = "pll3_48m_clk"; struct clk *gpt_clk, *pclk; + spear6xx_clk_init(); + /* get the system timer clock */ gpt_clk = clk_get_sys("gpt0", NULL); if (IS_ERR(gpt_clk)) { diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index e0f2e5b9530c..8c0cb6a965a3 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -3,6 +3,6 @@ # # Common support -obj-y := clock.o restart.o time.o +obj-y := restart.o time.o obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c deleted file mode 100644 index 67dd00381ea6..000000000000 --- a/arch/arm/plat-spear/clock.c +++ /dev/null @@ -1,1005 +0,0 @@ -/* - * arch/arm/plat-spear/clock.c - * - * Clock framework for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/bug.h> -#include <linux/clk.h> -#include <linux/debugfs.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <plat/clock.h> - -static DEFINE_SPINLOCK(clocks_lock); -static LIST_HEAD(root_clks); -#ifdef CONFIG_DEBUG_FS -static LIST_HEAD(clocks); -#endif - -static void propagate_rate(struct clk *, int on_init); -#ifdef CONFIG_DEBUG_FS -static int clk_debugfs_reparent(struct clk *); -#endif - -static int generic_clk_enable(struct clk *clk) -{ - unsigned int val; - - if (!clk->en_reg) - return -EFAULT; - - val = readl(clk->en_reg); - if (unlikely(clk->flags & RESET_TO_ENABLE)) - val &= ~(1 << clk->en_reg_bit); - else - val |= 1 << clk->en_reg_bit; - - writel(val, clk->en_reg); - - return 0; -} - -static void generic_clk_disable(struct clk *clk) -{ - unsigned int val; - - if (!clk->en_reg) - return; - - val = readl(clk->en_reg); - if (unlikely(clk->flags & RESET_TO_ENABLE)) - val |= 1 << clk->en_reg_bit; - else - val &= ~(1 << clk->en_reg_bit); - - writel(val, clk->en_reg); -} - -/* generic clk ops */ -static struct clkops generic_clkops = { - .enable = generic_clk_enable, - .disable = generic_clk_disable, -}; - -/* returns current programmed clocks clock info structure */ -static struct pclk_info *pclk_info_get(struct clk *clk) -{ - unsigned int val, i; - struct pclk_info *info = NULL; - - val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift) - & clk->pclk_sel->pclk_sel_mask; - - for (i = 0; i < clk->pclk_sel->pclk_count; i++) { - if (clk->pclk_sel->pclk_info[i].pclk_val == val) - info = &clk->pclk_sel->pclk_info[i]; - } - - return info; -} - -/* - * Set Update pclk, and pclk_info of clk and add clock sibling node to current - * parents children list - */ -static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info) -{ - unsigned long flags; - - spin_lock_irqsave(&clocks_lock, flags); - list_del(&clk->sibling); - list_add(&clk->sibling, &pclk_info->pclk->children); - - clk->pclk = pclk_info->pclk; - spin_unlock_irqrestore(&clocks_lock, flags); - -#ifdef CONFIG_DEBUG_FS - clk_debugfs_reparent(clk); -#endif -} - -static void do_clk_disable(struct clk *clk) -{ - if (!clk) - return; - - if (!clk->usage_count) { - WARN_ON(1); - return; - } - - clk->usage_count--; - - if (clk->usage_count == 0) { - /* - * Surely, there are no active childrens or direct users - * of this clock - */ - if (clk->pclk) - do_clk_disable(clk->pclk); - - if (clk->ops && clk->ops->disable) - clk->ops->disable(clk); - } -} - -static int do_clk_enable(struct clk *clk) -{ - int ret = 0; - - if (!clk) - return -EFAULT; - - if (clk->usage_count == 0) { - if (clk->pclk) { - ret = do_clk_enable(clk->pclk); - if (ret) - goto err; - } - if (clk->ops && clk->ops->enable) { - ret = clk->ops->enable(clk); - if (ret) { - if (clk->pclk) - do_clk_disable(clk->pclk); - goto err; - } - } - /* - * Since the clock is going to be used for the first - * time please reclac - */ - if (clk->recalc) { - ret = clk->recalc(clk); - if (ret) - goto err; - } - } - clk->usage_count++; -err: - return ret; -} - -/* - * clk_enable - inform the system when the clock source should be running. - * @clk: clock source - * - * If the clock can not be enabled/disabled, this should return success. - * - * Returns success (0) or negative errno. - */ -int clk_enable(struct clk *clk) -{ - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&clocks_lock, flags); - ret = do_clk_enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - return ret; -} -EXPORT_SYMBOL(clk_enable); - -/* - * clk_disable - inform the system when the clock source is no longer required. - * @clk: clock source - * - * Inform the system that a clock source is no longer required by - * a driver and may be shut down. - * - * Implementation detail: if the clock source is shared between - * multiple drivers, clk_enable() calls must be balanced by the - * same number of clk_disable() calls for the clock source to be - * disabled. - */ -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clocks_lock, flags); - do_clk_disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -/** - * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. - * This is only valid once the clock source has been enabled. - * @clk: clock source - */ -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags, rate; - - spin_lock_irqsave(&clocks_lock, flags); - rate = clk->rate; - spin_unlock_irqrestore(&clocks_lock, flags); - - return rate; -} -EXPORT_SYMBOL(clk_get_rate); - -/** - * clk_set_parent - set the parent clock source for this clock - * @clk: clock source - * @parent: parent clock source - * - * Returns success (0) or negative errno. - */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int i, found = 0, val = 0; - unsigned long flags; - - if (!clk || !parent) - return -EFAULT; - if (clk->pclk == parent) - return 0; - if (!clk->pclk_sel) - return -EPERM; - - /* check if requested parent is in clk parent list */ - for (i = 0; i < clk->pclk_sel->pclk_count; i++) { - if (clk->pclk_sel->pclk_info[i].pclk == parent) { - found = 1; - break; - } - } - - if (!found) - return -EINVAL; - - spin_lock_irqsave(&clocks_lock, flags); - /* reflect parent change in hardware */ - val = readl(clk->pclk_sel->pclk_sel_reg); - val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift); - val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift; - writel(val, clk->pclk_sel->pclk_sel_reg); - spin_unlock_irqrestore(&clocks_lock, flags); - - /* reflect parent change in software */ - clk_reparent(clk, &clk->pclk_sel->pclk_info[i]); - - propagate_rate(clk, 0); - return 0; -} -EXPORT_SYMBOL(clk_set_parent); - -/** - * clk_set_rate - set the clock rate for a clock source - * @clk: clock source - * @rate: desired clock rate in Hz - * - * Returns success (0) or negative errno. - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (!clk || !rate) - return -EFAULT; - - if (clk->set_rate) { - spin_lock_irqsave(&clocks_lock, flags); - ret = clk->set_rate(clk, rate); - if (!ret) - /* if successful -> propagate */ - propagate_rate(clk, 0); - spin_unlock_irqrestore(&clocks_lock, flags); - } else if (clk->pclk) { - u32 mult = clk->div_factor ? clk->div_factor : 1; - ret = clk_set_rate(clk->pclk, mult * rate); - } - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -/* registers clock in platform clock framework */ -void clk_register(struct clk_lookup *cl) -{ - struct clk *clk; - unsigned long flags; - - if (!cl || !cl->clk) - return; - clk = cl->clk; - - spin_lock_irqsave(&clocks_lock, flags); - - INIT_LIST_HEAD(&clk->children); - if (clk->flags & ALWAYS_ENABLED) - clk->ops = NULL; - else if (!clk->ops) - clk->ops = &generic_clkops; - - /* root clock don't have any parents */ - if (!clk->pclk && !clk->pclk_sel) { - list_add(&clk->sibling, &root_clks); - } else if (clk->pclk && !clk->pclk_sel) { - /* add clocks with only one parent to parent's children list */ - list_add(&clk->sibling, &clk->pclk->children); - } else { - /* clocks with more than one parent */ - struct pclk_info *pclk_info; - - pclk_info = pclk_info_get(clk); - if (!pclk_info) { - pr_err("CLKDEV: invalid pclk info of clk with" - " %s dev_id and %s con_id\n", - cl->dev_id, cl->con_id); - } else { - clk->pclk = pclk_info->pclk; - list_add(&clk->sibling, &pclk_info->pclk->children); - } - } - - spin_unlock_irqrestore(&clocks_lock, flags); - - /* debugfs specific */ -#ifdef CONFIG_DEBUG_FS - list_add(&clk->node, &clocks); - clk->cl = cl; -#endif - - /* add clock to arm clockdev framework */ - clkdev_add(cl); -} - -/** - * propagate_rate - recalculate and propagate all clocks to children - * @pclk: parent clock required to be propogated - * @on_init: flag for enabling clocks which are ENABLED_ON_INIT. - * - * Recalculates all children clocks - */ -void propagate_rate(struct clk *pclk, int on_init) -{ - struct clk *clk, *_temp; - int ret = 0; - - list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) { - if (clk->recalc) { - ret = clk->recalc(clk); - /* - * recalc will return error if clk out is not programmed - * In this case configure default rate. - */ - if (ret && clk->set_rate) - clk->set_rate(clk, 0); - } - propagate_rate(clk, on_init); - - if (!on_init) - continue; - - /* Enable clks enabled on init, in software view */ - if (clk->flags & ENABLED_ON_INIT) - do_clk_enable(clk); - } -} - -/** - * round_rate_index - return closest programmable rate index in rate_config tbl - * @clk: ptr to clock structure - * @drate: desired rate - * @rate: final rate will be returned in this variable only. - * - * Finds index in rate_config for highest clk rate which is less than - * requested rate. If there is no clk rate lesser than requested rate then - * -EINVAL is returned. This routine assumes that rate_config is written - * in incrementing order of clk rates. - * If drate passed is zero then default rate is programmed. - */ -static int -round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate) -{ - unsigned long tmp = 0, prev_rate = 0; - int index; - - if (!clk->calc_rate) - return -EFAULT; - - if (!drate) - return -EINVAL; - - /* - * This loops ends on two conditions: - * - as soon as clk is found with rate greater than requested rate. - * - if all clks in rate_config are smaller than requested rate. - */ - for (index = 0; index < clk->rate_config.count; index++) { - prev_rate = tmp; - tmp = clk->calc_rate(clk, index); - if (drate < tmp) { - index--; - break; - } - } - /* return if can't find suitable clock */ - if (index < 0) { - index = -EINVAL; - *rate = 0; - } else if (index == clk->rate_config.count) { - /* program with highest clk rate possible */ - index = clk->rate_config.count - 1; - *rate = tmp; - } else - *rate = prev_rate; - - return index; -} - -/** - * clk_round_rate - adjust a rate to the exact rate a clock can provide - * @clk: clock source - * @rate: desired clock rate in Hz - * - * Returns rounded clock rate in Hz, or negative errno. - */ -long clk_round_rate(struct clk *clk, unsigned long drate) -{ - long rate = 0; - int index; - - /* - * propagate call to parent who supports calc_rate. Similar approach is - * used in clk_set_rate. - */ - if (!clk->calc_rate) { - u32 mult; - if (!clk->pclk) - return clk->rate; - - mult = clk->div_factor ? clk->div_factor : 1; - return clk_round_rate(clk->pclk, mult * drate) / mult; - } - - index = round_rate_index(clk, drate, &rate); - if (index >= 0) - return rate; - else - return index; -} -EXPORT_SYMBOL(clk_round_rate); - -/*All below functions are called with lock held */ - -/* - * Calculates pll clk rate for specific value of mode, m, n and p - * - * In normal mode - * rate = (2 * M[15:8] * Fin)/(N * 2^P) - * - * In Dithered mode - * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P) - */ -unsigned long pll_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct pll_rate_tbl *tbls = clk->rate_config.tbls; - unsigned int mode; - - mode = tbls[index].mode ? 256 : 1; - return (((2 * rate / 10000) * tbls[index].m) / - (mode * tbls[index].n * (1 << tbls[index].p))) * 10000; -} - -/* - * calculates current programmed rate of pll1 - * - * In normal mode - * rate = (2 * M[15:8] * Fin)/(N * 2^P) - * - * In Dithered mode - * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P) - */ -int pll_clk_recalc(struct clk *clk) -{ - struct pll_clk_config *config = clk->private_data; - unsigned int num = 2, den = 0, val, mode = 0; - - mode = (readl(config->mode_reg) >> config->masks->mode_shift) & - config->masks->mode_mask; - - val = readl(config->cfg_reg); - /* calculate denominator */ - den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask; - den = 1 << den; - den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask; - - /* calculate numerator & denominator */ - if (!mode) { - /* Normal mode */ - num *= (val >> config->masks->norm_fdbk_m_shift) & - config->masks->norm_fdbk_m_mask; - } else { - /* Dithered mode */ - num *= (val >> config->masks->dith_fdbk_m_shift) & - config->masks->dith_fdbk_m_mask; - den *= 256; - } - - if (!den) - return -EINVAL; - - clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000; - return 0; -} - -/* - * Configures new clock rate of pll - */ -int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct pll_rate_tbl *tbls = clk->rate_config.tbls; - struct pll_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->mode_reg) & - ~(config->masks->mode_mask << config->masks->mode_shift); - val |= (tbls[i].mode & config->masks->mode_mask) << - config->masks->mode_shift; - writel(val, config->mode_reg); - - val = readl(config->cfg_reg) & - ~(config->masks->div_p_mask << config->masks->div_p_shift); - val |= (tbls[i].p & config->masks->div_p_mask) << - config->masks->div_p_shift; - val &= ~(config->masks->div_n_mask << config->masks->div_n_shift); - val |= (tbls[i].n & config->masks->div_n_mask) << - config->masks->div_n_shift; - val &= ~(config->masks->dith_fdbk_m_mask << - config->masks->dith_fdbk_m_shift); - if (tbls[i].mode) - val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) << - config->masks->dith_fdbk_m_shift; - else - val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) << - config->masks->norm_fdbk_m_shift; - - writel(val, config->cfg_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Calculates ahb, apb clk rate for specific value of div - */ -unsigned long bus_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct bus_rate_tbl *tbls = clk->rate_config.tbls; - - return rate / (tbls[index].div + 1); -} - -/* calculates current programmed rate of ahb or apb bus */ -int bus_clk_recalc(struct clk *clk) -{ - struct bus_clk_config *config = clk->private_data; - unsigned int div; - - div = ((readl(config->reg) >> config->masks->shift) & - config->masks->mask) + 1; - - if (!div) - return -EINVAL; - - clk->rate = (unsigned long)clk->pclk->rate / div; - return 0; -} - -/* Configures new clock rate of AHB OR APB bus */ -int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct bus_rate_tbl *tbls = clk->rate_config.tbls; - struct bus_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->reg) & - ~(config->masks->mask << config->masks->shift); - val |= (tbls[i].div & config->masks->mask) << config->masks->shift; - writel(val, config->reg); - - clk->rate = rate; - - return 0; -} - -/* - * gives rate for different values of eq, x and y - * - * Fout from synthesizer can be given from two equations: - * Fout1 = (Fin * X/Y)/2 EQ1 - * Fout2 = Fin * X/Y EQ2 - */ -unsigned long aux_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct aux_rate_tbl *tbls = clk->rate_config.tbls; - u8 eq = tbls[index].eq ? 1 : 2; - - return (((rate/10000) * tbls[index].xscale) / - (tbls[index].yscale * eq)) * 10000; -} - -/* - * calculates current programmed rate of auxiliary synthesizers - * used by: UART, FIRDA - * - * Fout from synthesizer can be given from two equations: - * Fout1 = (Fin * X/Y)/2 - * Fout2 = Fin * X/Y - * - * Selection of eqn 1 or 2 is programmed in register - */ -int aux_clk_recalc(struct clk *clk) -{ - struct aux_clk_config *config = clk->private_data; - unsigned int num = 1, den = 1, val, eqn; - - val = readl(config->synth_reg); - - eqn = (val >> config->masks->eq_sel_shift) & - config->masks->eq_sel_mask; - if (eqn == config->masks->eq1_mask) - den *= 2; - - /* calculate numerator */ - num = (val >> config->masks->xscale_sel_shift) & - config->masks->xscale_sel_mask; - - /* calculate denominator */ - den *= (val >> config->masks->yscale_sel_shift) & - config->masks->yscale_sel_mask; - - if (!den) - return -EINVAL; - - clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000; - return 0; -} - -/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/ -int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct aux_rate_tbl *tbls = clk->rate_config.tbls; - struct aux_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->synth_reg) & - ~(config->masks->eq_sel_mask << config->masks->eq_sel_shift); - val |= (tbls[i].eq & config->masks->eq_sel_mask) << - config->masks->eq_sel_shift; - val &= ~(config->masks->xscale_sel_mask << - config->masks->xscale_sel_shift); - val |= (tbls[i].xscale & config->masks->xscale_sel_mask) << - config->masks->xscale_sel_shift; - val &= ~(config->masks->yscale_sel_mask << - config->masks->yscale_sel_shift); - val |= (tbls[i].yscale & config->masks->yscale_sel_mask) << - config->masks->yscale_sel_shift; - writel(val, config->synth_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Calculates gpt clk rate for different values of mscale and nscale - * - * Fout= Fin/((2 ^ (N+1)) * (M+1)) - */ -unsigned long gpt_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct gpt_rate_tbl *tbls = clk->rate_config.tbls; - - return rate / ((1 << (tbls[index].nscale + 1)) * - (tbls[index].mscale + 1)); -} - -/* - * calculates current programmed rate of gpt synthesizers - * Fout from synthesizer can be given from below equations: - * Fout= Fin/((2 ^ (N+1)) * (M+1)) - */ -int gpt_clk_recalc(struct clk *clk) -{ - struct gpt_clk_config *config = clk->private_data; - unsigned int div = 1, val; - - val = readl(config->synth_reg); - div += (val >> config->masks->mscale_sel_shift) & - config->masks->mscale_sel_mask; - div *= 1 << (((val >> config->masks->nscale_sel_shift) & - config->masks->nscale_sel_mask) + 1); - - if (!div) - return -EINVAL; - - clk->rate = (unsigned long)clk->pclk->rate / div; - return 0; -} - -/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/ -int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct gpt_rate_tbl *tbls = clk->rate_config.tbls; - struct gpt_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask << - config->masks->mscale_sel_shift); - val |= (tbls[i].mscale & config->masks->mscale_sel_mask) << - config->masks->mscale_sel_shift; - val &= ~(config->masks->nscale_sel_mask << - config->masks->nscale_sel_shift); - val |= (tbls[i].nscale & config->masks->nscale_sel_mask) << - config->masks->nscale_sel_shift; - writel(val, config->synth_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Calculates clcd clk rate for different values of div - * - * Fout from synthesizer can be given from below equation: - * Fout= Fin/2*div (division factor) - * div is 17 bits:- - * 0-13 (fractional part) - * 14-16 (integer part) - * To calculate Fout we left shift val by 14 bits and divide Fin by - * complete div (including fractional part) and then right shift the - * result by 14 places. - */ -unsigned long clcd_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct clcd_rate_tbl *tbls = clk->rate_config.tbls; - - rate /= 1000; - rate <<= 12; - rate /= (2 * tbls[index].div); - rate >>= 12; - rate *= 1000; - - return rate; -} - -/* - * calculates current programmed rate of clcd synthesizer - * Fout from synthesizer can be given from below equation: - * Fout= Fin/2*div (division factor) - * div is 17 bits:- - * 0-13 (fractional part) - * 14-16 (integer part) - * To calculate Fout we left shift val by 14 bits and divide Fin by - * complete div (including fractional part) and then right shift the - * result by 14 places. - */ -int clcd_clk_recalc(struct clk *clk) -{ - struct clcd_clk_config *config = clk->private_data; - unsigned int div = 1; - unsigned long prate; - unsigned int val; - - val = readl(config->synth_reg); - div = (val >> config->masks->div_factor_shift) & - config->masks->div_factor_mask; - - if (!div) - return -EINVAL; - - prate = clk->pclk->rate / 1000; /* first level division, make it KHz */ - - clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12; - clk->rate *= 1000; - return 0; -} - -/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/ -int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct clcd_rate_tbl *tbls = clk->rate_config.tbls; - struct clcd_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->synth_reg) & ~(config->masks->div_factor_mask << - config->masks->div_factor_shift); - val |= (tbls[i].div & config->masks->div_factor_mask) << - config->masks->div_factor_shift; - writel(val, config->synth_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Used for clocks that always have value as the parent clock divided by a - * fixed divisor - */ -int follow_parent(struct clk *clk) -{ - unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor; - - clk->rate = clk->pclk->rate/div_factor; - return 0; -} - -/** - * recalc_root_clocks - recalculate and propagate all root clocks - * - * Recalculates all root clocks (clocks with no parent), which if the - * clock's .recalc is set correctly, should also propagate their rates. - */ -void recalc_root_clocks(void) -{ - struct clk *pclk; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&clocks_lock, flags); - list_for_each_entry(pclk, &root_clks, sibling) { - if (pclk->recalc) { - ret = pclk->recalc(pclk); - /* - * recalc will return error if clk out is not programmed - * In this case configure default clock. - */ - if (ret && pclk->set_rate) - pclk->set_rate(pclk, 0); - } - propagate_rate(pclk, 1); - /* Enable clks enabled on init, in software view */ - if (pclk->flags & ENABLED_ON_INIT) - do_clk_enable(pclk); - } - spin_unlock_irqrestore(&clocks_lock, flags); -} - -void __init clk_init(void) -{ - recalc_root_clocks(); -} - -#ifdef CONFIG_DEBUG_FS -/* - * debugfs support to trace clock tree hierarchy and attributes - */ -static struct dentry *clk_debugfs_root; -static int clk_debugfs_register_one(struct clk *c) -{ - int err; - struct dentry *d; - struct clk *pa = c->pclk; - char s[255]; - char *p = s; - - if (c) { - if (c->cl->con_id) - p += sprintf(p, "%s", c->cl->con_id); - if (c->cl->dev_id) - p += sprintf(p, "%s", c->cl->dev_id); - } - d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root); - if (!d) - return -ENOMEM; - c->dent = d; - - d = debugfs_create_u32("usage_count", S_IRUGO, c->dent, - (u32 *)&c->usage_count); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); - if (!d) { - err = -ENOMEM; - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(c->dent); - return err; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->pclk; - - if (pa && !pa->dent) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (!c->dent) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clocks, node) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} -late_initcall(clk_debugfs_init); - -static int clk_debugfs_reparent(struct clk *c) -{ - debugfs_remove(c->dent); - return clk_debugfs_register_one(c); -} -#endif /* CONFIG_DEBUG_FS */ diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h deleted file mode 100644 index 0062bafef12d..000000000000 --- a/arch/arm/plat-spear/include/plat/clock.h +++ /dev/null @@ -1,249 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/clock.h - * - * Clock framework definitions for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_CLOCK_H -#define __PLAT_CLOCK_H - -#include <linux/list.h> -#include <linux/clkdev.h> -#include <linux/types.h> - -/* clk structure flags */ -#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */ -#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */ -#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */ - -/** - * struct clkops - clock operations - * @enable: pointer to clock enable function - * @disable: pointer to clock disable function - */ -struct clkops { - int (*enable) (struct clk *); - void (*disable) (struct clk *); -}; - -/** - * struct pclk_info - parents info - * @pclk: pointer to parent clk - * @pclk_val: value to be written for selecting this parent - */ -struct pclk_info { - struct clk *pclk; - u8 pclk_val; -}; - -/** - * struct pclk_sel - parents selection configuration - * @pclk_info: pointer to array of parent clock info - * @pclk_count: number of parents - * @pclk_sel_reg: register for selecting a parent - * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also) - */ -struct pclk_sel { - struct pclk_info *pclk_info; - u8 pclk_count; - void __iomem *pclk_sel_reg; - unsigned int pclk_sel_mask; -}; - -/** - * struct rate_config - clk rate configurations - * @tbls: array of device specific clk rate tables, in ascending order of rates - * @count: size of tbls array - * @default_index: default setting when originally disabled - */ -struct rate_config { - void *tbls; - u8 count; - u8 default_index; -}; - -/** - * struct clk - clock structure - * @usage_count: num of users who enabled this clock - * @flags: flags for clock properties - * @rate: programmed clock rate in Hz - * @en_reg: clk enable/disable reg - * @en_reg_bit: clk enable/disable bit - * @ops: clk enable/disable ops - generic_clkops selected if NULL - * @recalc: pointer to clock rate recalculate function - * @set_rate: pointer to clock set rate function - * @calc_rate: pointer to clock get rate function for index - * @rate_config: rate configuration information, used by set_rate - * @div_factor: division factor to parent clock. - * @pclk: current parent clk - * @pclk_sel: pointer to parent selection structure - * @pclk_sel_shift: register shift for selecting parent of this clock - * @children: list for childrens or this clock - * @sibling: node for list of clocks having same parents - * @private_data: clock specific private data - * @node: list to maintain clocks linearly - * @cl: clocklook up associated with this clock - * @dent: object for debugfs - */ -struct clk { - unsigned int usage_count; - unsigned int flags; - unsigned long rate; - void __iomem *en_reg; - u8 en_reg_bit; - const struct clkops *ops; - int (*recalc) (struct clk *); - int (*set_rate) (struct clk *, unsigned long rate); - unsigned long (*calc_rate)(struct clk *, int index); - struct rate_config rate_config; - unsigned int div_factor; - - struct clk *pclk; - struct pclk_sel *pclk_sel; - unsigned int pclk_sel_shift; - - struct list_head children; - struct list_head sibling; - void *private_data; -#ifdef CONFIG_DEBUG_FS - struct list_head node; - struct clk_lookup *cl; - struct dentry *dent; -#endif -}; - -/* pll configuration structure */ -struct pll_clk_masks { - u32 mode_mask; - u32 mode_shift; - - u32 norm_fdbk_m_mask; - u32 norm_fdbk_m_shift; - u32 dith_fdbk_m_mask; - u32 dith_fdbk_m_shift; - u32 div_p_mask; - u32 div_p_shift; - u32 div_n_mask; - u32 div_n_shift; -}; - -struct pll_clk_config { - void __iomem *mode_reg; - void __iomem *cfg_reg; - struct pll_clk_masks *masks; -}; - -/* pll clk rate config structure */ -struct pll_rate_tbl { - u8 mode; - u16 m; - u8 n; - u8 p; -}; - -/* ahb and apb bus configuration structure */ -struct bus_clk_masks { - u32 mask; - u32 shift; -}; - -struct bus_clk_config { - void __iomem *reg; - struct bus_clk_masks *masks; -}; - -/* ahb and apb clk bus rate config structure */ -struct bus_rate_tbl { - u8 div; -}; - -/* Aux clk configuration structure: applicable to UART and FIRDA */ -struct aux_clk_masks { - u32 eq_sel_mask; - u32 eq_sel_shift; - u32 eq1_mask; - u32 eq2_mask; - u32 xscale_sel_mask; - u32 xscale_sel_shift; - u32 yscale_sel_mask; - u32 yscale_sel_shift; -}; - -struct aux_clk_config { - void __iomem *synth_reg; - struct aux_clk_masks *masks; -}; - -/* aux clk rate config structure */ -struct aux_rate_tbl { - u16 xscale; - u16 yscale; - u8 eq; -}; - -/* GPT clk configuration structure */ -struct gpt_clk_masks { - u32 mscale_sel_mask; - u32 mscale_sel_shift; - u32 nscale_sel_mask; - u32 nscale_sel_shift; -}; - -struct gpt_clk_config { - void __iomem *synth_reg; - struct gpt_clk_masks *masks; -}; - -/* gpt clk rate config structure */ -struct gpt_rate_tbl { - u16 mscale; - u16 nscale; -}; - -/* clcd clk configuration structure */ -struct clcd_synth_masks { - u32 div_factor_mask; - u32 div_factor_shift; -}; - -struct clcd_clk_config { - void __iomem *synth_reg; - struct clcd_synth_masks *masks; -}; - -/* clcd clk rate config structure */ -struct clcd_rate_tbl { - u16 div; -}; - -/* platform specific clock functions */ -void __init clk_init(void); -void clk_register(struct clk_lookup *cl); -void recalc_root_clocks(void); - -/* clock recalc & set rate functions */ -int follow_parent(struct clk *clk); -unsigned long pll_calc_rate(struct clk *clk, int index); -int pll_clk_recalc(struct clk *clk); -int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long bus_calc_rate(struct clk *clk, int index); -int bus_clk_recalc(struct clk *clk); -int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long gpt_calc_rate(struct clk *clk, int index); -int gpt_clk_recalc(struct clk *clk); -int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long aux_calc_rate(struct clk *clk, int index); -int aux_clk_recalc(struct clk *clk); -int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long clcd_calc_rate(struct clk *clk, int index); -int clcd_clk_recalc(struct clk *clk); -int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate); - -#endif /* __PLAT_CLOCK_H */ diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index abb5bdecd509..1c94989d725f 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -219,10 +219,10 @@ void __init spear_setup_timer(void) goto err_iomap; } - ret = clk_enable(gpt_clk); + ret = clk_prepare_enable(gpt_clk); if (ret < 0) { - pr_err("%s:couldn't enable gpt clock\n", __func__); - goto err_clk; + pr_err("%s:couldn't prepare-enable gpt clock\n", __func__); + goto err_prepare_enable_clk; } spear_clockevent_init(); @@ -230,7 +230,7 @@ void __init spear_setup_timer(void) return; -err_clk: +err_prepare_enable_clk: clk_put(gpt_clk); err_iomap: iounmap(gpt_base); diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 4a5bdbc30389..b9a5158a30b1 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -2,5 +2,6 @@ obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o - +# SoCs specific obj-$(CONFIG_ARCH_MXS) += mxs/ +obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile new file mode 100644 index 000000000000..335886049c83 --- /dev/null +++ b/drivers/clk/spear/Makefile @@ -0,0 +1,8 @@ +# +# SPEAr Clock specific Makefile +# + +obj-y += clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o + +obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx_clock.o +obj-$(CONFIG_ARCH_SPEAR6XX) += spear6xx_clock.o diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c new file mode 100644 index 000000000000..af34074e702b --- /dev/null +++ b/drivers/clk/spear/clk-aux-synth.c @@ -0,0 +1,198 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Auxiliary Synthesizer clock implementation + */ + +#define pr_fmt(fmt) "clk-aux-synth: " fmt + +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include "clk.h" + +/* + * DOC: Auxiliary Synthesizer clock + * + * Aux synth gives rate for different values of eq, x and y + * + * Fout from synthesizer can be given from two equations: + * Fout1 = (Fin * X/Y)/2 EQ1 + * Fout2 = Fin * X/Y EQ2 + */ + +#define to_clk_aux(_hw) container_of(_hw, struct clk_aux, hw) + +static struct aux_clk_masks default_aux_masks = { + .eq_sel_mask = AUX_EQ_SEL_MASK, + .eq_sel_shift = AUX_EQ_SEL_SHIFT, + .eq1_mask = AUX_EQ1_SEL, + .eq2_mask = AUX_EQ2_SEL, + .xscale_sel_mask = AUX_XSCALE_MASK, + .xscale_sel_shift = AUX_XSCALE_SHIFT, + .yscale_sel_mask = AUX_YSCALE_MASK, + .yscale_sel_shift = AUX_YSCALE_SHIFT, + .enable_bit = AUX_SYNT_ENB, +}; + +static unsigned long aux_calc_rate(struct clk_hw *hw, unsigned long prate, + int index) +{ + struct clk_aux *aux = to_clk_aux(hw); + struct aux_rate_tbl *rtbl = aux->rtbl; + u8 eq = rtbl[index].eq ? 1 : 2; + + return (((prate / 10000) * rtbl[index].xscale) / + (rtbl[index].yscale * eq)) * 10000; +} + +static long clk_aux_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + struct clk_aux *aux = to_clk_aux(hw); + int unused; + + return clk_round_rate_index(hw, drate, *prate, aux_calc_rate, + aux->rtbl_cnt, &unused); +} + +static unsigned long clk_aux_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_aux *aux = to_clk_aux(hw); + unsigned int num = 1, den = 1, val, eqn; + unsigned long flags = 0; + + if (aux->lock) + spin_lock_irqsave(aux->lock, flags); + + val = readl_relaxed(aux->reg); + + if (aux->lock) + spin_unlock_irqrestore(aux->lock, flags); + + eqn = (val >> aux->masks->eq_sel_shift) & aux->masks->eq_sel_mask; + if (eqn == aux->masks->eq1_mask) + den = 2; + + /* calculate numerator */ + num = (val >> aux->masks->xscale_sel_shift) & + aux->masks->xscale_sel_mask; + + /* calculate denominator */ + den *= (val >> aux->masks->yscale_sel_shift) & + aux->masks->yscale_sel_mask; + + if (!den) + return 0; + + return (((parent_rate / 10000) * num) / den) * 10000; +} + +/* Configures new clock rate of aux */ +static int clk_aux_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_aux *aux = to_clk_aux(hw); + struct aux_rate_tbl *rtbl = aux->rtbl; + unsigned long val, flags = 0; + int i; + + clk_round_rate_index(hw, drate, prate, aux_calc_rate, aux->rtbl_cnt, + &i); + + if (aux->lock) + spin_lock_irqsave(aux->lock, flags); + + val = readl_relaxed(aux->reg) & + ~(aux->masks->eq_sel_mask << aux->masks->eq_sel_shift); + val |= (rtbl[i].eq & aux->masks->eq_sel_mask) << + aux->masks->eq_sel_shift; + val &= ~(aux->masks->xscale_sel_mask << aux->masks->xscale_sel_shift); + val |= (rtbl[i].xscale & aux->masks->xscale_sel_mask) << + aux->masks->xscale_sel_shift; + val &= ~(aux->masks->yscale_sel_mask << aux->masks->yscale_sel_shift); + val |= (rtbl[i].yscale & aux->masks->yscale_sel_mask) << + aux->masks->yscale_sel_shift; + writel_relaxed(val, aux->reg); + + if (aux->lock) + spin_unlock_irqrestore(aux->lock, flags); + + return 0; +} + +static struct clk_ops clk_aux_ops = { + .recalc_rate = clk_aux_recalc_rate, + .round_rate = clk_aux_round_rate, + .set_rate = clk_aux_set_rate, +}; + +struct clk *clk_register_aux(const char *aux_name, const char *gate_name, + const char *parent_name, unsigned long flags, void __iomem *reg, + struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl, + u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk) +{ + struct clk_aux *aux; + struct clk_init_data init; + struct clk *clk; + + if (!aux_name || !parent_name || !reg || !rtbl || !rtbl_cnt) { + pr_err("Invalid arguments passed"); + return ERR_PTR(-EINVAL); + } + + aux = kzalloc(sizeof(*aux), GFP_KERNEL); + if (!aux) { + pr_err("could not allocate aux clk\n"); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_aux assignments */ + if (!masks) + aux->masks = &default_aux_masks; + else + aux->masks = masks; + + aux->reg = reg; + aux->rtbl = rtbl; + aux->rtbl_cnt = rtbl_cnt; + aux->lock = lock; + aux->hw.init = &init; + + init.name = aux_name; + init.ops = &clk_aux_ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = clk_register(NULL, &aux->hw); + if (IS_ERR_OR_NULL(clk)) + goto free_aux; + + if (gate_name) { + struct clk *tgate_clk; + + tgate_clk = clk_register_gate(NULL, gate_name, aux_name, 0, reg, + aux->masks->enable_bit, 0, lock); + if (IS_ERR_OR_NULL(tgate_clk)) + goto free_aux; + + if (gate_clk) + *gate_clk = tgate_clk; + } + + return clk; + +free_aux: + kfree(aux); + pr_err("clk register failed\n"); + + return NULL; +} diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c new file mode 100644 index 000000000000..4dbdb3fe18e0 --- /dev/null +++ b/drivers/clk/spear/clk-frac-synth.c @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Fractional Synthesizer clock implementation + */ + +#define pr_fmt(fmt) "clk-frac-synth: " fmt + +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include "clk.h" + +#define DIV_FACTOR_MASK 0x1FFFF + +/* + * DOC: Fractional Synthesizer clock + * + * Fout from synthesizer can be given from below equation: + * + * Fout= Fin/2*div (division factor) + * div is 17 bits:- + * 0-13 (fractional part) + * 14-16 (integer part) + * div is (16-14 bits).(13-0 bits) (in binary) + * + * Fout = Fin/(2 * div) + * Fout = ((Fin / 10000)/(2 * div)) * 10000 + * Fout = (2^14 * (Fin / 10000)/(2^14 * (2 * div))) * 10000 + * Fout = (((Fin / 10000) << 14)/(2 * (div << 14))) * 10000 + * + * div << 14 simply 17 bit value written at register. + * Max error due to scaling down by 10000 is 10 KHz + */ + +#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, hw) + +static unsigned long frac_calc_rate(struct clk_hw *hw, unsigned long prate, + int index) +{ + struct clk_frac *frac = to_clk_frac(hw); + struct frac_rate_tbl *rtbl = frac->rtbl; + + prate /= 10000; + prate <<= 14; + prate /= (2 * rtbl[index].div); + prate *= 10000; + + return prate; +} + +static long clk_frac_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + struct clk_frac *frac = to_clk_frac(hw); + int unused; + + return clk_round_rate_index(hw, drate, *prate, frac_calc_rate, + frac->rtbl_cnt, &unused); +} + +static unsigned long clk_frac_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_frac *frac = to_clk_frac(hw); + unsigned long flags = 0; + unsigned int div = 1, val; + + if (frac->lock) + spin_lock_irqsave(frac->lock, flags); + + val = readl_relaxed(frac->reg); + + if (frac->lock) + spin_unlock_irqrestore(frac->lock, flags); + + div = val & DIV_FACTOR_MASK; + + if (!div) + return 0; + + parent_rate = parent_rate / 10000; + + parent_rate = (parent_rate << 14) / (2 * div); + return parent_rate * 10000; +} + +/* Configures new clock rate of frac */ +static int clk_frac_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_frac *frac = to_clk_frac(hw); + struct frac_rate_tbl *rtbl = frac->rtbl; + unsigned long flags = 0, val; + int i; + + clk_round_rate_index(hw, drate, prate, frac_calc_rate, frac->rtbl_cnt, + &i); + + if (frac->lock) + spin_lock_irqsave(frac->lock, flags); + + val = readl_relaxed(frac->reg) & ~DIV_FACTOR_MASK; + val |= rtbl[i].div & DIV_FACTOR_MASK; + writel_relaxed(val, frac->reg); + + if (frac->lock) + spin_unlock_irqrestore(frac->lock, flags); + + return 0; +} + +struct clk_ops clk_frac_ops = { + .recalc_rate = clk_frac_recalc_rate, + .round_rate = clk_frac_round_rate, + .set_rate = clk_frac_set_rate, +}; + +struct clk *clk_register_frac(const char *name, const char *parent_name, + unsigned long flags, void __iomem *reg, + struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock) +{ + struct clk_init_data init; + struct clk_frac *frac; + struct clk *clk; + + if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) { + pr_err("Invalid arguments passed"); + return ERR_PTR(-EINVAL); + } + + frac = kzalloc(sizeof(*frac), GFP_KERNEL); + if (!frac) { + pr_err("could not allocate frac clk\n"); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_frac assignments */ + frac->reg = reg; + frac->rtbl = rtbl; + frac->rtbl_cnt = rtbl_cnt; + frac->lock = lock; + frac->hw.init = &init; + + init.name = name; + init.ops = &clk_frac_ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = clk_register(NULL, &frac->hw); + if (!IS_ERR_OR_NULL(clk)) + return clk; + + pr_err("clk register failed\n"); + kfree(frac); + + return NULL; +} diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c new file mode 100644 index 000000000000..b471c9762a97 --- /dev/null +++ b/drivers/clk/spear/clk-gpt-synth.c @@ -0,0 +1,154 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * General Purpose Timer Synthesizer clock implementation + */ + +#define pr_fmt(fmt) "clk-gpt-synth: " fmt + +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include "clk.h" + +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +/* + * DOC: General Purpose Timer Synthesizer clock + * + * Calculates gpt synth clk rate for different values of mscale and nscale + * + * Fout= Fin/((2 ^ (N+1)) * (M+1)) + */ + +#define to_clk_gpt(_hw) container_of(_hw, struct clk_gpt, hw) + +static unsigned long gpt_calc_rate(struct clk_hw *hw, unsigned long prate, + int index) +{ + struct clk_gpt *gpt = to_clk_gpt(hw); + struct gpt_rate_tbl *rtbl = gpt->rtbl; + + prate /= ((1 << (rtbl[index].nscale + 1)) * (rtbl[index].mscale + 1)); + + return prate; +} + +static long clk_gpt_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + struct clk_gpt *gpt = to_clk_gpt(hw); + int unused; + + return clk_round_rate_index(hw, drate, *prate, gpt_calc_rate, + gpt->rtbl_cnt, &unused); +} + +static unsigned long clk_gpt_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_gpt *gpt = to_clk_gpt(hw); + unsigned long flags = 0; + unsigned int div = 1, val; + + if (gpt->lock) + spin_lock_irqsave(gpt->lock, flags); + + val = readl_relaxed(gpt->reg); + + if (gpt->lock) + spin_unlock_irqrestore(gpt->lock, flags); + + div += val & GPT_MSCALE_MASK; + div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1); + + if (!div) + return 0; + + return parent_rate / div; +} + +/* Configures new clock rate of gpt */ +static int clk_gpt_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_gpt *gpt = to_clk_gpt(hw); + struct gpt_rate_tbl *rtbl = gpt->rtbl; + unsigned long flags = 0, val; + int i; + + clk_round_rate_index(hw, drate, prate, gpt_calc_rate, gpt->rtbl_cnt, + &i); + + if (gpt->lock) + spin_lock_irqsave(gpt->lock, flags); + + val = readl(gpt->reg) & ~GPT_MSCALE_MASK; + val &= ~(GPT_NSCALE_MASK << GPT_NSCALE_SHIFT); + + val |= rtbl[i].mscale & GPT_MSCALE_MASK; + val |= (rtbl[i].nscale & GPT_NSCALE_MASK) << GPT_NSCALE_SHIFT; + + writel_relaxed(val, gpt->reg); + + if (gpt->lock) + spin_unlock_irqrestore(gpt->lock, flags); + + return 0; +} + +static struct clk_ops clk_gpt_ops = { + .recalc_rate = clk_gpt_recalc_rate, + .round_rate = clk_gpt_round_rate, + .set_rate = clk_gpt_set_rate, +}; + +struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned + long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8 + rtbl_cnt, spinlock_t *lock) +{ + struct clk_init_data init; + struct clk_gpt *gpt; + struct clk *clk; + + if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) { + pr_err("Invalid arguments passed"); + return ERR_PTR(-EINVAL); + } + + gpt = kzalloc(sizeof(*gpt), GFP_KERNEL); + if (!gpt) { + pr_err("could not allocate gpt clk\n"); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_gpt assignments */ + gpt->reg = reg; + gpt->rtbl = rtbl; + gpt->rtbl_cnt = rtbl_cnt; + gpt->lock = lock; + gpt->hw.init = &init; + + init.name = name; + init.ops = &clk_gpt_ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = clk_register(NULL, &gpt->hw); + if (!IS_ERR_OR_NULL(clk)) + return clk; + + pr_err("clk register failed\n"); + kfree(gpt); + + return NULL; +} diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c new file mode 100644 index 000000000000..dcd4bdf4b0d9 --- /dev/null +++ b/drivers/clk/spear/clk-vco-pll.c @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * VCO-PLL clock implementation + */ + +#define pr_fmt(fmt) "clk-vco-pll: " fmt + +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include "clk.h" + +/* + * DOC: VCO-PLL clock + * + * VCO and PLL rate are derived from following equations: + * + * In normal mode + * vco = (2 * M[15:8] * Fin)/N + * + * In Dithered mode + * vco = (2 * M[15:0] * Fin)/(256 * N) + * + * pll_rate = pll/2^p + * + * vco and pll are very closely bound to each other, "vco needs to program: + * mode, m & n" and "pll needs to program p", both share common enable/disable + * logic. + * + * clk_register_vco_pll() registers instances of both vco & pll. + * CLK_SET_RATE_PARENT flag is forced for pll, as it will always pass its + * set_rate to vco. A single rate table exists for both the clocks, which + * configures m, n and p. + */ + +/* PLL_CTR register masks */ +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSM 2 +#define PLL_MODE_DITH_SSM 3 +#define PLL_MODE_MASK 3 +#define PLL_MODE_SHIFT 3 +#define PLL_ENABLE 2 + +#define PLL_LOCK_SHIFT 0 +#define PLL_LOCK_MASK 1 + +/* PLL FRQ register masks */ +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_DITH_FDBK_M_MASK 0xFFFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DIV_P_MASK 0x7 +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_N_SHIFT 0 + +#define to_clk_vco(_hw) container_of(_hw, struct clk_vco, hw) +#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw) + +/* Calculates pll clk rate for specific value of mode, m, n and p */ +static unsigned long pll_calc_rate(struct pll_rate_tbl *rtbl, + unsigned long prate, int index, unsigned long *pll_rate) +{ + unsigned long rate = prate; + unsigned int mode; + + mode = rtbl[index].mode ? 256 : 1; + rate = (((2 * rate / 10000) * rtbl[index].m) / (mode * rtbl[index].n)); + + if (pll_rate) + *pll_rate = (rate / (1 << rtbl[index].p)) * 10000; + + return rate * 10000; +} + +static long clk_pll_round_rate_index(struct clk_hw *hw, unsigned long drate, + unsigned long *prate, int *index) +{ + struct clk_pll *pll = to_clk_pll(hw); + unsigned long prev_rate, vco_prev_rate, rate = 0; + unsigned long vco_parent_rate = + __clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk))); + + if (!prate) { + pr_err("%s: prate is must for pll clk\n", __func__); + return -EINVAL; + } + + for (*index = 0; *index < pll->vco->rtbl_cnt; (*index)++) { + prev_rate = rate; + vco_prev_rate = *prate; + *prate = pll_calc_rate(pll->vco->rtbl, vco_parent_rate, *index, + &rate); + if (drate < rate) { + /* previous clock was best */ + if (*index) { + rate = prev_rate; + *prate = vco_prev_rate; + (*index)--; + } + break; + } + } + + return rate; +} + +static long clk_pll_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + int unused; + + return clk_pll_round_rate_index(hw, drate, prate, &unused); +} + +static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long + parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + unsigned int p; + + if (pll->vco->lock) + spin_lock_irqsave(pll->vco->lock, flags); + + p = readl_relaxed(pll->vco->cfg_reg); + + if (pll->vco->lock) + spin_unlock_irqrestore(pll->vco->lock, flags); + + p = (p >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK; + + return parent_rate / (1 << p); +} + +static int clk_pll_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_pll *pll = to_clk_pll(hw); + struct pll_rate_tbl *rtbl = pll->vco->rtbl; + unsigned long flags = 0, val; + int i; + + clk_pll_round_rate_index(hw, drate, NULL, &i); + + if (pll->vco->lock) + spin_lock_irqsave(pll->vco->lock, flags); + + val = readl_relaxed(pll->vco->cfg_reg); + val &= ~(PLL_DIV_P_MASK << PLL_DIV_P_SHIFT); + val |= (rtbl[i].p & PLL_DIV_P_MASK) << PLL_DIV_P_SHIFT; + writel_relaxed(val, pll->vco->cfg_reg); + + if (pll->vco->lock) + spin_unlock_irqrestore(pll->vco->lock, flags); + + return 0; +} + +static struct clk_ops clk_pll_ops = { + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_round_rate, + .set_rate = clk_pll_set_rate, +}; + +static inline unsigned long vco_calc_rate(struct clk_hw *hw, + unsigned long prate, int index) +{ + struct clk_vco *vco = to_clk_vco(hw); + + return pll_calc_rate(vco->rtbl, prate, index, NULL); +} + +static long clk_vco_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + struct clk_vco *vco = to_clk_vco(hw); + int unused; + + return clk_round_rate_index(hw, drate, *prate, vco_calc_rate, + vco->rtbl_cnt, &unused); +} + +static unsigned long clk_vco_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_vco *vco = to_clk_vco(hw); + unsigned long flags = 0; + unsigned int num = 2, den = 0, val, mode = 0; + + if (vco->lock) + spin_lock_irqsave(vco->lock, flags); + + mode = (readl_relaxed(vco->mode_reg) >> PLL_MODE_SHIFT) & PLL_MODE_MASK; + + val = readl_relaxed(vco->cfg_reg); + + if (vco->lock) + spin_unlock_irqrestore(vco->lock, flags); + + den = (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK; + + /* calculate numerator & denominator */ + if (!mode) { + /* Normal mode */ + num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK; + } else { + /* Dithered mode */ + num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK; + den *= 256; + } + + if (!den) { + WARN(1, "%s: denominator can't be zero\n", __func__); + return 0; + } + + return (((parent_rate / 10000) * num) / den) * 10000; +} + +/* Configures new clock rate of vco */ +static int clk_vco_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_vco *vco = to_clk_vco(hw); + struct pll_rate_tbl *rtbl = vco->rtbl; + unsigned long flags = 0, val; + int i; + + clk_round_rate_index(hw, drate, prate, vco_calc_rate, vco->rtbl_cnt, + &i); + + if (vco->lock) + spin_lock_irqsave(vco->lock, flags); + + val = readl_relaxed(vco->mode_reg); + val &= ~(PLL_MODE_MASK << PLL_MODE_SHIFT); + val |= (rtbl[i].mode & PLL_MODE_MASK) << PLL_MODE_SHIFT; + writel_relaxed(val, vco->mode_reg); + + val = readl_relaxed(vco->cfg_reg); + val &= ~(PLL_DIV_N_MASK << PLL_DIV_N_SHIFT); + val |= (rtbl[i].n & PLL_DIV_N_MASK) << PLL_DIV_N_SHIFT; + + val &= ~(PLL_DITH_FDBK_M_MASK << PLL_DITH_FDBK_M_SHIFT); + if (rtbl[i].mode) + val |= (rtbl[i].m & PLL_DITH_FDBK_M_MASK) << + PLL_DITH_FDBK_M_SHIFT; + else + val |= (rtbl[i].m & PLL_NORM_FDBK_M_MASK) << + PLL_NORM_FDBK_M_SHIFT; + + writel_relaxed(val, vco->cfg_reg); + + if (vco->lock) + spin_unlock_irqrestore(vco->lock, flags); + + return 0; +} + +static struct clk_ops clk_vco_ops = { + .recalc_rate = clk_vco_recalc_rate, + .round_rate = clk_vco_round_rate, + .set_rate = clk_vco_set_rate, +}; + +struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name, + const char *vco_gate_name, const char *parent_name, + unsigned long flags, void __iomem *mode_reg, void __iomem + *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt, + spinlock_t *lock, struct clk **pll_clk, + struct clk **vco_gate_clk) +{ + struct clk_vco *vco; + struct clk_pll *pll; + struct clk *vco_clk, *tpll_clk, *tvco_gate_clk; + struct clk_init_data vco_init, pll_init; + const char **vco_parent_name; + + if (!vco_name || !pll_name || !parent_name || !mode_reg || !cfg_reg || + !rtbl || !rtbl_cnt) { + pr_err("Invalid arguments passed"); + return ERR_PTR(-EINVAL); + } + + vco = kzalloc(sizeof(*vco), GFP_KERNEL); + if (!vco) { + pr_err("could not allocate vco clk\n"); + return ERR_PTR(-ENOMEM); + } + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("could not allocate pll clk\n"); + goto free_vco; + } + + /* struct clk_vco assignments */ + vco->mode_reg = mode_reg; + vco->cfg_reg = cfg_reg; + vco->rtbl = rtbl; + vco->rtbl_cnt = rtbl_cnt; + vco->lock = lock; + vco->hw.init = &vco_init; + + pll->vco = vco; + pll->hw.init = &pll_init; + + if (vco_gate_name) { + tvco_gate_clk = clk_register_gate(NULL, vco_gate_name, + parent_name, 0, mode_reg, PLL_ENABLE, 0, lock); + if (IS_ERR_OR_NULL(tvco_gate_clk)) + goto free_pll; + + if (vco_gate_clk) + *vco_gate_clk = tvco_gate_clk; + vco_parent_name = &vco_gate_name; + } else { + vco_parent_name = &parent_name; + } + + vco_init.name = vco_name; + vco_init.ops = &clk_vco_ops; + vco_init.flags = flags; + vco_init.parent_names = vco_parent_name; + vco_init.num_parents = 1; + + pll_init.name = pll_name; + pll_init.ops = &clk_pll_ops; + pll_init.flags = CLK_SET_RATE_PARENT; + pll_init.parent_names = &vco_name; + pll_init.num_parents = 1; + + vco_clk = clk_register(NULL, &vco->hw); + if (IS_ERR_OR_NULL(vco_clk)) + goto free_pll; + + tpll_clk = clk_register(NULL, &pll->hw); + if (IS_ERR_OR_NULL(tpll_clk)) + goto free_pll; + + if (pll_clk) + *pll_clk = tpll_clk; + + return vco_clk; + +free_pll: + kfree(pll); +free_vco: + kfree(vco); + + pr_err("Failed to register vco pll clock\n"); + + return ERR_PTR(-ENOMEM); +} diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c new file mode 100644 index 000000000000..376d4e5ff326 --- /dev/null +++ b/drivers/clk/spear/clk.c @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * SPEAr clk - Common routines + */ + +#include <linux/clk-provider.h> +#include <linux/types.h> +#include "clk.h" + +long clk_round_rate_index(struct clk_hw *hw, unsigned long drate, + unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt, + int *index) +{ + unsigned long prev_rate, rate = 0; + + for (*index = 0; *index < rtbl_cnt; (*index)++) { + prev_rate = rate; + rate = calc_rate(hw, parent_rate, *index); + if (drate < rate) { + /* previous clock was best */ + if (*index) { + rate = prev_rate; + (*index)--; + } + break; + } + } + + return rate; +} diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h new file mode 100644 index 000000000000..3321c46a071c --- /dev/null +++ b/drivers/clk/spear/clk.h @@ -0,0 +1,134 @@ +/* + * Clock framework definitions for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __SPEAR_CLK_H +#define __SPEAR_CLK_H + +#include <linux/clk-provider.h> +#include <linux/spinlock_types.h> +#include <linux/types.h> + +/* Auxiliary Synth clk */ +/* Default masks */ +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF +#define AUX_SYNT_ENB 31 + +struct aux_clk_masks { + u32 eq_sel_mask; + u32 eq_sel_shift; + u32 eq1_mask; + u32 eq2_mask; + u32 xscale_sel_mask; + u32 xscale_sel_shift; + u32 yscale_sel_mask; + u32 yscale_sel_shift; + u32 enable_bit; +}; + +struct aux_rate_tbl { + u16 xscale; + u16 yscale; + u8 eq; +}; + +struct clk_aux { + struct clk_hw hw; + void __iomem *reg; + struct aux_clk_masks *masks; + struct aux_rate_tbl *rtbl; + u8 rtbl_cnt; + spinlock_t *lock; +}; + +/* Fractional Synth clk */ +struct frac_rate_tbl { + u32 div; +}; + +struct clk_frac { + struct clk_hw hw; + void __iomem *reg; + struct frac_rate_tbl *rtbl; + u8 rtbl_cnt; + spinlock_t *lock; +}; + +/* GPT clk */ +struct gpt_rate_tbl { + u16 mscale; + u16 nscale; +}; + +struct clk_gpt { + struct clk_hw hw; + void __iomem *reg; + struct gpt_rate_tbl *rtbl; + u8 rtbl_cnt; + spinlock_t *lock; +}; + +/* VCO-PLL clk */ +struct pll_rate_tbl { + u8 mode; + u16 m; + u8 n; + u8 p; +}; + +struct clk_vco { + struct clk_hw hw; + void __iomem *mode_reg; + void __iomem *cfg_reg; + struct pll_rate_tbl *rtbl; + u8 rtbl_cnt; + spinlock_t *lock; +}; + +struct clk_pll { + struct clk_hw hw; + struct clk_vco *vco; + const char *parent[1]; + spinlock_t *lock; +}; + +typedef unsigned long (*clk_calc_rate)(struct clk_hw *hw, unsigned long prate, + int index); + +/* clk register routines */ +struct clk *clk_register_aux(const char *aux_name, const char *gate_name, + const char *parent_name, unsigned long flags, void __iomem *reg, + struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl, + u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk); +struct clk *clk_register_frac(const char *name, const char *parent_name, + unsigned long flags, void __iomem *reg, + struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock); +struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned + long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8 + rtbl_cnt, spinlock_t *lock); +struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name, + const char *vco_gate_name, const char *parent_name, + unsigned long flags, void __iomem *mode_reg, void __iomem + *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt, + spinlock_t *lock, struct clk **pll_clk, + struct clk **vco_gate_clk); + +long clk_round_rate_index(struct clk_hw *hw, unsigned long drate, + unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt, + int *index); + +#endif /* __SPEAR_CLK_H */ diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c new file mode 100644 index 000000000000..440bb3e4c971 --- /dev/null +++ b/drivers/clk/spear/spear3xx_clock.c @@ -0,0 +1,612 @@ +/* + * SPEAr3xx machines clock framework source file + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/spinlock_types.h> +#include <mach/misc_regs.h> +#include "clk.h" + +static DEFINE_SPINLOCK(_lock); + +#define PLL1_CTR (MISC_BASE + 0x008) +#define PLL1_FRQ (MISC_BASE + 0x00C) +#define PLL2_CTR (MISC_BASE + 0x014) +#define PLL2_FRQ (MISC_BASE + 0x018) +#define PLL_CLK_CFG (MISC_BASE + 0x020) + /* PLL_CLK_CFG register masks */ + #define MCTR_CLK_SHIFT 28 + #define MCTR_CLK_MASK 3 + +#define CORE_CLK_CFG (MISC_BASE + 0x024) + /* CORE CLK CFG register masks */ + #define GEN_SYNTH2_3_CLK_SHIFT 18 + #define GEN_SYNTH2_3_CLK_MASK 1 + + #define HCLK_RATIO_SHIFT 10 + #define HCLK_RATIO_MASK 2 + #define PCLK_RATIO_SHIFT 8 + #define PCLK_RATIO_MASK 2 + +#define PERIP_CLK_CFG (MISC_BASE + 0x028) + /* PERIP_CLK_CFG register masks */ + #define UART_CLK_SHIFT 4 + #define UART_CLK_MASK 1 + #define FIRDA_CLK_SHIFT 5 + #define FIRDA_CLK_MASK 2 + #define GPT0_CLK_SHIFT 8 + #define GPT1_CLK_SHIFT 11 + #define GPT2_CLK_SHIFT 12 + #define GPT_CLK_MASK 1 + +#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) + /* PERIP1_CLK_ENB register masks */ + #define UART_CLK_ENB 3 + #define SSP_CLK_ENB 5 + #define I2C_CLK_ENB 7 + #define JPEG_CLK_ENB 8 + #define FIRDA_CLK_ENB 10 + #define GPT1_CLK_ENB 11 + #define GPT2_CLK_ENB 12 + #define ADC_CLK_ENB 15 + #define RTC_CLK_ENB 17 + #define GPIO_CLK_ENB 18 + #define DMA_CLK_ENB 19 + #define SMI_CLK_ENB 21 + #define GMAC_CLK_ENB 23 + #define USBD_CLK_ENB 24 + #define USBH_CLK_ENB 25 + #define C3_CLK_ENB 31 + +#define RAS_CLK_ENB (MISC_BASE + 0x034) + #define RAS_AHB_CLK_ENB 0 + #define RAS_PLL1_CLK_ENB 1 + #define RAS_APB_CLK_ENB 2 + #define RAS_32K_CLK_ENB 3 + #define RAS_24M_CLK_ENB 4 + #define RAS_48M_CLK_ENB 5 + #define RAS_PLL2_CLK_ENB 7 + #define RAS_SYNT0_CLK_ENB 8 + #define RAS_SYNT1_CLK_ENB 9 + #define RAS_SYNT2_CLK_ENB 10 + #define RAS_SYNT3_CLK_ENB 11 + +#define PRSC0_CLK_CFG (MISC_BASE + 0x044) +#define PRSC1_CLK_CFG (MISC_BASE + 0x048) +#define PRSC2_CLK_CFG (MISC_BASE + 0x04C) +#define AMEM_CLK_CFG (MISC_BASE + 0x050) + #define AMEM_CLK_ENB 0 + +#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) +#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) +#define UART_CLK_SYNT (MISC_BASE + 0x064) +#define GMAC_CLK_SYNT (MISC_BASE + 0x068) +#define GEN0_CLK_SYNT (MISC_BASE + 0x06C) +#define GEN1_CLK_SYNT (MISC_BASE + 0x070) +#define GEN2_CLK_SYNT (MISC_BASE + 0x074) +#define GEN3_CLK_SYNT (MISC_BASE + 0x078) + +/* pll rate configuration table, in ascending order of rates */ +static struct pll_rate_tbl pll_rtbl[] = { + {.mode = 0, .m = 0x53, .n = 0x0C, .p = 0x1}, /* vco 332 & pll 166 MHz */ + {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* vco 532 & pll 266 MHz */ + {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* vco 664 & pll 332 MHz */ +}; + +/* aux rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl aux_rtbl[] = { + /* For PLL1 = 332 MHz */ + {.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */ + {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */ + {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */ + {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ +}; + +/* gpt rate configuration table, in ascending order of rates */ +static struct gpt_rate_tbl gpt_rtbl[] = { + /* For pll1 = 332 MHz */ + {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ + {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ + {.mscale = 1, .nscale = 0}, /* 83 MHz */ +}; + +/* clock parents */ +static const char *uart0_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", }; +static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk", +}; +static const char *gpt0_parents[] = { "pll3_48m_clk", "gpt0_synth_clk", }; +static const char *gpt1_parents[] = { "pll3_48m_clk", "gpt1_synth_clk", }; +static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", }; +static const char *gen2_3_parents[] = { "pll1_clk", "pll2_clk", }; +static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none", + "pll2_clk", }; + +#ifdef CONFIG_MACH_SPEAR300 +static void __init spear300_clk_init(void) +{ + struct clk *clk; + + clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0, + 1, 1); + clk_register_clkdev(clk, NULL, "60000000.clcd"); + + clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "94000000.flash"); + + clk = clk_register_fixed_factor(NULL, "sdhci_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "70000000.sdhci"); + + clk = clk_register_fixed_factor(NULL, "gpio1_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "a9000000.gpio"); + + clk = clk_register_fixed_factor(NULL, "kbd_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "a0000000.kbd"); +} +#endif + +/* array of all spear 310 clock lookups */ +#ifdef CONFIG_MACH_SPEAR310 +static void __init spear310_clk_init(void) +{ + struct clk *clk; + + clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, "emi", NULL); + + clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "44000000.flash"); + + clk = clk_register_fixed_factor(NULL, "tdm_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "tdm"); + + clk = clk_register_fixed_factor(NULL, "uart1_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "b2000000.serial"); + + clk = clk_register_fixed_factor(NULL, "uart2_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "b2080000.serial"); + + clk = clk_register_fixed_factor(NULL, "uart3_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "b2100000.serial"); + + clk = clk_register_fixed_factor(NULL, "uart4_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "b2180000.serial"); + + clk = clk_register_fixed_factor(NULL, "uart5_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "b2200000.serial"); +} +#endif + +/* array of all spear 320 clock lookups */ +#ifdef CONFIG_MACH_SPEAR320 + #define SMII_PCLK_SHIFT 18 + #define SMII_PCLK_MASK 2 + #define SMII_PCLK_VAL_PAD 0x0 + #define SMII_PCLK_VAL_PLL2 0x1 + #define SMII_PCLK_VAL_SYNTH0 0x2 + #define SDHCI_PCLK_SHIFT 15 + #define SDHCI_PCLK_MASK 1 + #define SDHCI_PCLK_VAL_48M 0x0 + #define SDHCI_PCLK_VAL_SYNTH3 0x1 + #define I2S_REF_PCLK_SHIFT 8 + #define I2S_REF_PCLK_MASK 1 + #define I2S_REF_PCLK_SYNTH_VAL 0x1 + #define I2S_REF_PCLK_PLL2_VAL 0x0 + #define UART1_PCLK_SHIFT 6 + #define UART1_PCLK_MASK 1 + #define SPEAR320_UARTX_PCLK_VAL_SYNTH1 0x0 + #define SPEAR320_UARTX_PCLK_VAL_APB 0x1 + +static const char *i2s_ref_parents[] = { "ras_pll2_clk", + "ras_gen2_synth_gate_clk", }; +static const char *sdhci_parents[] = { "ras_pll3_48m_clk", + "ras_gen3_synth_gate_clk", +}; +static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk", + "ras_gen0_synth_gate_clk", }; +static const char *uartx_parents[] = { "ras_gen1_synth_gate_clk", "ras_apb_clk", +}; + +static void __init spear320_clk_init(void) +{ + struct clk *clk; + + clk = clk_register_fixed_rate(NULL, "smii_125m_pad_clk", NULL, + CLK_IS_ROOT, 125000000); + clk_register_clkdev(clk, "smii_125m_pad", NULL); + + clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0, + 1, 1); + clk_register_clkdev(clk, NULL, "90000000.clcd"); + + clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, "emi", NULL); + + clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "4c000000.flash"); + + clk = clk_register_fixed_factor(NULL, "i2c1_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "a7000000.i2c"); + + clk = clk_register_fixed_factor(NULL, "pwm_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, "pwm", NULL); + + clk = clk_register_fixed_factor(NULL, "ssp1_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "a5000000.spi"); + + clk = clk_register_fixed_factor(NULL, "ssp2_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "a6000000.spi"); + + clk = clk_register_fixed_factor(NULL, "can0_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "c_can_platform.0"); + + clk = clk_register_fixed_factor(NULL, "can1_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "c_can_platform.1"); + + clk = clk_register_fixed_factor(NULL, "i2s_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "i2s"); + + clk = clk_register_mux(NULL, "i2s_ref_clk", i2s_ref_parents, + ARRAY_SIZE(i2s_ref_parents), 0, SPEAR320_CONTROL_REG, + I2S_REF_PCLK_SHIFT, I2S_REF_PCLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "i2s_ref_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", 0, 1, + 4); + clk_register_clkdev(clk, "i2s_sclk", NULL); + + clk = clk_register_mux(NULL, "rs485_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_RS485_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "a9300000.serial"); + + clk = clk_register_mux(NULL, "sdhci_clk", sdhci_parents, + ARRAY_SIZE(sdhci_parents), 0, SPEAR320_CONTROL_REG, + SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "70000000.sdhci"); + + clk = clk_register_mux(NULL, "smii_pclk", smii0_parents, + ARRAY_SIZE(smii0_parents), 0, SPEAR320_CONTROL_REG, + SMII_PCLK_SHIFT, SMII_PCLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "smii_pclk"); + + clk = clk_register_fixed_factor(NULL, "smii_clk", "smii_pclk", 0, 1, 1); + clk_register_clkdev(clk, NULL, "smii"); + + clk = clk_register_mux(NULL, "uart1_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_CONTROL_REG, + UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "a3000000.serial"); + + clk = clk_register_mux(NULL, "uart2_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "a4000000.serial"); + + clk = clk_register_mux(NULL, "uart3_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_UART3_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "a9100000.serial"); + + clk = clk_register_mux(NULL, "uart4_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_UART4_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "a9200000.serial"); + + clk = clk_register_mux(NULL, "uart5_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_UART5_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "60000000.serial"); + + clk = clk_register_mux(NULL, "uart6_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_UART6_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "60100000.serial"); +} +#endif + +void __init spear3xx_clk_init(void) +{ + struct clk *clk, *clk1; + + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, + 32000); + clk_register_clkdev(clk, "osc_32k_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT, + 24000000); + clk_register_clkdev(clk, "osc_24m_clk", NULL); + + /* clock derived from 32 KHz osc clk */ + clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0, + PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc900000.rtc"); + + /* clock derived from 24 MHz osc clk */ + clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0, + 48000000); + clk_register_clkdev(clk, "pll3_48m_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_24m_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "fc880000.wdt"); + + clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, + "osc_24m_clk", 0, PLL1_CTR, PLL1_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco1_clk", NULL); + clk_register_clkdev(clk1, "pll1_clk", NULL); + + clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, + "osc_24m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco2_clk", NULL); + clk_register_clkdev(clk1, "pll2_clk", NULL); + + /* clock derived from pll1 clk */ + clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1); + clk_register_clkdev(clk, "cpu_clk", NULL); + + clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk", + CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT, + HCLK_RATIO_MASK, 0, &_lock); + clk_register_clkdev(clk, "ahb_clk", NULL); + + clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk", + "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "uart_synth_clk", NULL); + clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents, + ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG, + UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "uart0_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart0", "uart0_mux_clk", 0, + PERIP1_CLK_ENB, UART_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0000000.serial"); + + clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk", + "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "firda_synth_clk", NULL); + clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents, + ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG, + FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "firda_mux_clk", NULL); + + clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0, + PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "firda"); + + /* gpt clocks */ + clk_register_gpt("gpt0_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents, + ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG, + GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt0"); + + clk_register_gpt("gpt1_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt1_parents, + ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG, + GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gpt1_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0, + PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt1"); + + clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents, + ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG, + GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gpt2_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0, + PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt2"); + + /* general synths clocks */ + clk = clk_register_aux("gen0_synth_clk", "gen0_synth_gate_clk", + "pll1_clk", 0, GEN0_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "gen0_synth_clk", NULL); + clk_register_clkdev(clk1, "gen0_synth_gate_clk", NULL); + + clk = clk_register_aux("gen1_synth_clk", "gen1_synth_gate_clk", + "pll1_clk", 0, GEN1_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "gen1_synth_clk", NULL); + clk_register_clkdev(clk1, "gen1_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "gen2_3_parent_clk", gen2_3_parents, + ARRAY_SIZE(gen2_3_parents), 0, CORE_CLK_CFG, + GEN_SYNTH2_3_CLK_SHIFT, GEN_SYNTH2_3_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "gen2_3_parent_clk", NULL); + + clk = clk_register_aux("gen2_synth_clk", "gen2_synth_gate_clk", + "gen2_3_parent_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "gen2_synth_clk", NULL); + clk_register_clkdev(clk1, "gen2_synth_gate_clk", NULL); + + clk = clk_register_aux("gen3_synth_clk", "gen3_synth_gate_clk", + "gen2_3_parent_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "gen3_synth_clk", NULL); + clk_register_clkdev(clk1, "gen3_synth_gate_clk", NULL); + + /* clock derived from pll3 clk */ + clk = clk_register_gate(NULL, "usbh_clk", "pll3_48m_clk", 0, + PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "usbh_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1, + 1); + clk_register_clkdev(clk, "usbh.0_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "usbh.1_clk", "usbh_clk", 0, 1, + 1); + clk_register_clkdev(clk, "usbh.1_clk", NULL); + + clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0, + PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "designware_udc"); + + /* clock derived from ahb clk */ + clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2, + 1); + clk_register_clkdev(clk, "ahbmult2_clk", NULL); + + clk = clk_register_mux(NULL, "ddr_clk", ddr_parents, + ARRAY_SIZE(ddr_parents), 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, + MCTR_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "ddr_clk", NULL); + + clk = clk_register_divider(NULL, "apb_clk", "ahb_clk", + CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT, + PCLK_RATIO_MASK, 0, &_lock); + clk_register_clkdev(clk, "apb_clk", NULL); + + clk = clk_register_gate(NULL, "amem_clk", "ahb_clk", 0, AMEM_CLK_CFG, + AMEM_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "amem_clk", NULL); + + clk = clk_register_gate(NULL, "c3_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + C3_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "c3_clk"); + + clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + DMA_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc400000.dma"); + + clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + GMAC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "e0800000.eth"); + + clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + I2C_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0180000.i2c"); + + clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + JPEG_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "jpeg"); + + clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + SMI_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc000000.flash"); + + /* clock derived from apb clk */ + clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB, + ADC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "adc"); + + clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, PERIP1_CLK_ENB, + GPIO_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc980000.gpio"); + + clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB, + SSP_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0100000.spi"); + + /* RAS clk enable */ + clk = clk_register_gate(NULL, "ras_ahb_clk", "ahb_clk", 0, RAS_CLK_ENB, + RAS_AHB_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_ahb_clk", NULL); + + clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, RAS_CLK_ENB, + RAS_APB_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_apb_clk", NULL); + + clk = clk_register_gate(NULL, "ras_32k_clk", "osc_32k_clk", 0, + RAS_CLK_ENB, RAS_32K_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_32k_clk", NULL); + + clk = clk_register_gate(NULL, "ras_24m_clk", "osc_24m_clk", 0, + RAS_CLK_ENB, RAS_24M_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_24m_clk", NULL); + + clk = clk_register_gate(NULL, "ras_pll1_clk", "pll1_clk", 0, + RAS_CLK_ENB, RAS_PLL1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_pll1_clk", NULL); + + clk = clk_register_gate(NULL, "ras_pll2_clk", "pll2_clk", 0, + RAS_CLK_ENB, RAS_PLL2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_pll2_clk", NULL); + + clk = clk_register_gate(NULL, "ras_pll3_48m_clk", "pll3_48m_clk", 0, + RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_pll3_48m_clk", NULL); + + clk = clk_register_gate(NULL, "ras_gen0_synth_gate_clk", + "gen0_synth_gate_clk", 0, RAS_CLK_ENB, + RAS_SYNT0_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_gen0_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "ras_gen1_synth_gate_clk", + "gen1_synth_gate_clk", 0, RAS_CLK_ENB, + RAS_SYNT1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_gen1_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "ras_gen2_synth_gate_clk", + "gen2_synth_gate_clk", 0, RAS_CLK_ENB, + RAS_SYNT2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_gen2_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "ras_gen3_synth_gate_clk", + "gen3_synth_gate_clk", 0, RAS_CLK_ENB, + RAS_SYNT3_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_gen3_synth_gate_clk", NULL); + + if (of_machine_is_compatible("st,spear300")) + spear300_clk_init(); + else if (of_machine_is_compatible("st,spear310")) + spear310_clk_init(); + else if (of_machine_is_compatible("st,spear320")) + spear320_clk_init(); +} diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c new file mode 100644 index 000000000000..f9a20b382304 --- /dev/null +++ b/drivers/clk/spear/spear6xx_clock.c @@ -0,0 +1,342 @@ +/* + * SPEAr6xx machines clock framework source file + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/io.h> +#include <linux/spinlock_types.h> +#include <mach/misc_regs.h> +#include "clk.h" + +static DEFINE_SPINLOCK(_lock); + +#define PLL1_CTR (MISC_BASE + 0x008) +#define PLL1_FRQ (MISC_BASE + 0x00C) +#define PLL2_CTR (MISC_BASE + 0x014) +#define PLL2_FRQ (MISC_BASE + 0x018) +#define PLL_CLK_CFG (MISC_BASE + 0x020) + /* PLL_CLK_CFG register masks */ + #define MCTR_CLK_SHIFT 28 + #define MCTR_CLK_MASK 3 + +#define CORE_CLK_CFG (MISC_BASE + 0x024) + /* CORE CLK CFG register masks */ + #define HCLK_RATIO_SHIFT 10 + #define HCLK_RATIO_MASK 2 + #define PCLK_RATIO_SHIFT 8 + #define PCLK_RATIO_MASK 2 + +#define PERIP_CLK_CFG (MISC_BASE + 0x028) + /* PERIP_CLK_CFG register masks */ + #define CLCD_CLK_SHIFT 2 + #define CLCD_CLK_MASK 2 + #define UART_CLK_SHIFT 4 + #define UART_CLK_MASK 1 + #define FIRDA_CLK_SHIFT 5 + #define FIRDA_CLK_MASK 2 + #define GPT0_CLK_SHIFT 8 + #define GPT1_CLK_SHIFT 10 + #define GPT2_CLK_SHIFT 11 + #define GPT3_CLK_SHIFT 12 + #define GPT_CLK_MASK 1 + +#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) + /* PERIP1_CLK_ENB register masks */ + #define UART0_CLK_ENB 3 + #define UART1_CLK_ENB 4 + #define SSP0_CLK_ENB 5 + #define SSP1_CLK_ENB 6 + #define I2C_CLK_ENB 7 + #define JPEG_CLK_ENB 8 + #define FSMC_CLK_ENB 9 + #define FIRDA_CLK_ENB 10 + #define GPT2_CLK_ENB 11 + #define GPT3_CLK_ENB 12 + #define GPIO2_CLK_ENB 13 + #define SSP2_CLK_ENB 14 + #define ADC_CLK_ENB 15 + #define GPT1_CLK_ENB 11 + #define RTC_CLK_ENB 17 + #define GPIO1_CLK_ENB 18 + #define DMA_CLK_ENB 19 + #define SMI_CLK_ENB 21 + #define CLCD_CLK_ENB 22 + #define GMAC_CLK_ENB 23 + #define USBD_CLK_ENB 24 + #define USBH0_CLK_ENB 25 + #define USBH1_CLK_ENB 26 + +#define PRSC0_CLK_CFG (MISC_BASE + 0x044) +#define PRSC1_CLK_CFG (MISC_BASE + 0x048) +#define PRSC2_CLK_CFG (MISC_BASE + 0x04C) + +#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) +#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) +#define UART_CLK_SYNT (MISC_BASE + 0x064) + +/* vco rate configuration table, in ascending order of rates */ +static struct pll_rate_tbl pll_rtbl[] = { + {.mode = 0, .m = 0x53, .n = 0x0F, .p = 0x1}, /* vco 332 & pll 166 MHz */ + {.mode = 0, .m = 0x85, .n = 0x0F, .p = 0x1}, /* vco 532 & pll 266 MHz */ + {.mode = 0, .m = 0xA6, .n = 0x0F, .p = 0x1}, /* vco 664 & pll 332 MHz */ +}; + +/* aux rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl aux_rtbl[] = { + /* For PLL1 = 332 MHz */ + {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */ + {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */ + {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ +}; + +static const char *clcd_parents[] = { "pll3_48m_clk", "clcd_synth_gate_clk", }; +static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk", +}; +static const char *uart_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", }; +static const char *gpt0_1_parents[] = { "pll3_48m_clk", "gpt0_1_synth_clk", }; +static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", }; +static const char *gpt3_parents[] = { "pll3_48m_clk", "gpt3_synth_clk", }; +static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none", + "pll2_clk", }; + +/* gpt rate configuration table, in ascending order of rates */ +static struct gpt_rate_tbl gpt_rtbl[] = { + /* For pll1 = 332 MHz */ + {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ + {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ + {.mscale = 1, .nscale = 0}, /* 83 MHz */ +}; + +void __init spear6xx_clk_init(void) +{ + struct clk *clk, *clk1; + + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, + 32000); + clk_register_clkdev(clk, "osc_32k_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_30m_clk", NULL, CLK_IS_ROOT, + 30000000); + clk_register_clkdev(clk, "osc_30m_clk", NULL); + + /* clock derived from 32 KHz osc clk */ + clk = clk_register_gate(NULL, "rtc_spear", "osc_32k_clk", 0, + PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "rtc-spear"); + + /* clock derived from 30 MHz osc clk */ + clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0, + 48000000); + clk_register_clkdev(clk, "pll3_48m_clk", NULL); + + clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk", + 0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), + &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco1_clk", NULL); + clk_register_clkdev(clk1, "pll1_clk", NULL); + + clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, + "osc_30m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco2_clk", NULL); + clk_register_clkdev(clk1, "pll2_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_30m_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "wdt"); + + /* clock derived from pll1 clk */ + clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1); + clk_register_clkdev(clk, "cpu_clk", NULL); + + clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk", + CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT, + HCLK_RATIO_MASK, 0, &_lock); + clk_register_clkdev(clk, "ahb_clk", NULL); + + clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk", + "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "uart_synth_clk", NULL); + clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "uart_mux_clk", uart_parents, + ARRAY_SIZE(uart_parents), 0, PERIP_CLK_CFG, + UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "uart_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart0", "uart_mux_clk", 0, + PERIP1_CLK_ENB, UART0_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0000000.serial"); + + clk = clk_register_gate(NULL, "uart1", "uart_mux_clk", 0, + PERIP1_CLK_ENB, UART1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0080000.serial"); + + clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk", + "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "firda_synth_clk", NULL); + clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents, + ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG, + FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "firda_mux_clk", NULL); + + clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0, + PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "firda"); + + clk = clk_register_aux("clcd_synth_clk", "clcd_synth_gate_clk", + "pll1_clk", 0, CLCD_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "clcd_synth_clk", NULL); + clk_register_clkdev(clk1, "clcd_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "clcd_mux_clk", clcd_parents, + ARRAY_SIZE(clcd_parents), 0, PERIP_CLK_CFG, + CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "clcd_mux_clk", NULL); + + clk = clk_register_gate(NULL, "clcd_clk", "clcd_mux_clk", 0, + PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "clcd"); + + /* gpt clocks */ + clk = clk_register_gpt("gpt0_1_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk_register_clkdev(clk, "gpt0_1_synth_clk", NULL); + + clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt0_1_parents, + ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG, + GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt0"); + + clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt0_1_parents, + ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG, + GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gpt1_mux_clk", NULL); + + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0, + PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt1"); + + clk = clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk_register_clkdev(clk, "gpt2_synth_clk", NULL); + + clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents, + ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG, + GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gpt2_mux_clk", NULL); + + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0, + PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt2"); + + clk = clk_register_gpt("gpt3_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk_register_clkdev(clk, "gpt3_synth_clk", NULL); + + clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt3_parents, + ARRAY_SIZE(gpt3_parents), 0, PERIP_CLK_CFG, + GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gpt3_mux_clk", NULL); + + clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0, + PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt3"); + + /* clock derived from pll3 clk */ + clk = clk_register_gate(NULL, "usbh0_clk", "pll3_48m_clk", 0, + PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "usbh.0_clk"); + + clk = clk_register_gate(NULL, "usbh1_clk", "pll3_48m_clk", 0, + PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "usbh.1_clk"); + + clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0, + PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "designware_udc"); + + /* clock derived from ahb clk */ + clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2, + 1); + clk_register_clkdev(clk, "ahbmult2_clk", NULL); + + clk = clk_register_mux(NULL, "ddr_clk", ddr_parents, + ARRAY_SIZE(ddr_parents), + 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "ddr_clk", NULL); + + clk = clk_register_divider(NULL, "apb_clk", "ahb_clk", + CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT, + PCLK_RATIO_MASK, 0, &_lock); + clk_register_clkdev(clk, "apb_clk", NULL); + + clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + DMA_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc400000.dma"); + + clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + FSMC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d1800000.flash"); + + clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + GMAC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gmac"); + + clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + I2C_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0200000.i2c"); + + clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + JPEG_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "jpeg"); + + clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + SMI_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc000000.flash"); + + /* clock derived from apb clk */ + clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB, + ADC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "adc"); + + clk = clk_register_fixed_factor(NULL, "gpio0_clk", "apb_clk", 0, 1, 1); + clk_register_clkdev(clk, NULL, "f0100000.gpio"); + + clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0, PERIP1_CLK_ENB, + GPIO1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc980000.gpio"); + + clk = clk_register_gate(NULL, "gpio2_clk", "apb_clk", 0, PERIP1_CLK_ENB, + GPIO2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d8100000.gpio"); + + clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB, + SSP0_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "ssp-pl022.0"); + + clk = clk_register_gate(NULL, "ssp1_clk", "apb_clk", 0, PERIP1_CLK_ENB, + SSP1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "ssp-pl022.1"); + + clk = clk_register_gate(NULL, "ssp2_clk", "apb_clk", 0, PERIP1_CLK_ENB, + SSP2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "ssp-pl022.2"); +} |