diff options
118 files changed, 3628 insertions, 838 deletions
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt index d90e17e2428b..a9a2f2fc44f2 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.txt +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt @@ -14,6 +14,8 @@ Optional properties: - label: symbolic name for the connector, - type: size of the connector, should be specified in case of USB-A, USB-B non-fullsize connectors: "mini", "micro". +- self-powered: Set this property if the usb device that has its own power + source. Optional properties for usb-c-connector: - power-role: should be one of "source", "sink" or "dual"(DRP) if typec diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index b3acebe08eb0..3264e1978d25 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -22,7 +22,8 @@ Required properties: - cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection device. See also cpsw-phy-sel.txt for it's binding. Note that in legacy cases cpsw-phy-sel may be - a child device instead of a phandle. + a child device instead of a phandle + (DEPRECATED, use phys property instead). Optional properties: - ti,hwmods : Must be "cpgmac0" @@ -44,6 +45,7 @@ Optional properties: Slave Properties: Required properties: - phy-mode : See ethernet.txt file in the same directory +- phys : phandle on phy-gmii-sel PHY (see phy/ti-phy-gmii-sel.txt) Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports @@ -85,12 +87,14 @@ Examples: phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; }; cpsw_emac1: slave@1 { phy_id = <&davinci_mdio>, <1>; phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 0>; }; }; @@ -114,11 +118,13 @@ Examples: phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; }; cpsw_emac1: slave@1 { phy_id = <&davinci_mdio>, <1>; phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 0>; }; }; diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt new file mode 100644 index 000000000000..a22e853d710c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt @@ -0,0 +1,17 @@ +* Freescale i.MX8MQ USB3 PHY binding + +Required properties: +- compatible: Should be "fsl,imx8mq-usb-phy" +- #phys-cells: must be 0 (see phy-bindings.txt in this directory) +- reg: The base address and length of the registers +- clocks: phandles to the clocks for each clock listed in clock-names +- clock-names: must contain "phy" + +Example: + usb3_phy0: phy@381f0040 { + compatible = "fsl,imx8mq-usb-phy"; + reg = <0x381f0040 0x40>; + clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; + clock-names = "phy"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index fbc198d5dd39..41a1074228ba 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -25,10 +25,6 @@ Required properties: - For all others: - The reg-names property shouldn't be defined. - - #clock-cells: must be 1 - - Phy pll outputs a bunch of clocks for Tx, Rx and Pipe - interface (for pipe based PHYs). These clock are then gate-controlled - by gcc. - #address-cells: must be 1 - #size-cells: must be 1 - ranges: must be present @@ -82,27 +78,33 @@ Required nodes: - Each device node of QMP phy is required to have as many child nodes as the number of lanes the PHY has. -Required properties for child node: +Required properties for child nodes of PCIe PHYs (one child per lane): - reg: list of offset and length pairs of register sets for PHY blocks - - - index 0: tx - - index 1: rx - - index 2: pcs - - index 3: pcs_misc (optional) + tx, rx, pcs, and pcs_misc (optional). + - #phy-cells: must be 0 +Required properties for a single "lanes" child node of non-PCIe PHYs: + - reg: list of offset and length pairs of register sets for PHY blocks + For 1-lane devices: + tx, rx, pcs, and (optionally) pcs_misc + For 2-lane devices: + tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc - #phy-cells: must be 0 -Required properties child node of pcie and usb3 qmp phys: +Required properties for child node of PCIe and USB3 qmp phys: - clocks: a list of phandles and clock-specifier pairs, one for each entry in clock-names. - clock-names: Must contain following: "pipe<lane-number>" for pipe clock specific to each lane. - clock-output-names: Name of the PHY clock that will be the parent for the above pipe clock. - For "qcom,ipq8074-qmp-pcie-phy": - "pcie20_phy0_pipe_clk" Pipe Clock parent (or) "pcie20_phy1_pipe_clk" + - #clock-cells: must be 0 + - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then + gate-controlled by the gcc. Required properties for child node of PHYs with lane reset, AKA: "qcom,msm8996-qmp-pcie-phy" @@ -115,7 +117,6 @@ Example: phy@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; reg = <0x34000 0x488>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -137,6 +138,7 @@ Example: reg = <0x35000 0x130>, <0x35200 0x200>, <0x35400 0x1dc>; + #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; @@ -150,3 +152,54 @@ Example: ... ... }; + + phy@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0x88eb000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + lane@88eb200 { + reg = <0x88eb200 0x128>, + <0x88eb400 0x1fc>, + <0x88eb800 0x218>, + <0x88eb600 0x70>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + phy@1d87000 { + compatible = "qcom,sdm845-qmp-ufs-phy"; + reg = <0x1d87000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + lanes@1d87400 { + reg = <0x1d87400 0x108>, + <0x1d87600 0x1e0>, + <0x1d87c00 0x1dc>, + <0x1d87800 0x108>, + <0x1d87a00 0x1e0>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 07ca4ec4a745..f2e120af17f0 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -14,13 +14,14 @@ Required properties: * allwinner,sun8i-r40-usb-phy * allwinner,sun8i-v3s-usb-phy * allwinner,sun50i-a64-usb-phy + * allwinner,sun50i-h6-usb-phy - reg : a list of offset + length pairs - reg-names : * "phy_ctrl" - * "pmu0" for H3, V3s and A64 + * "pmu0" for H3, V3s, A64 or H6 * "pmu1" * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 - * "pmu3" for sun8i-h3 + * "pmu3" for sun8i-h3 or sun50i-h6 - #phy-cells : from the generic phy bindings, must be 1 - clocks : phandle + clock specifier for the phy clocks - clock-names : @@ -29,12 +30,13 @@ Required properties: * "usb0_phy", "usb1_phy" for sun8i * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3 + * "usb0_phy" and "usb3_phy" for sun50i-h6 - resets : a list of phandle + reset specifier pairs - reset-names : * "usb0_reset" * "usb1_reset" * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 - * "usb3_reset" for sun8i-h3 + * "usb3_reset" for sun8i-h3 and sun50i-h6 Optional properties: - usb0_id_det-gpios : gpio phandle for reading the otg id pin value diff --git a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt new file mode 100644 index 000000000000..50ce9ae0f7a5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt @@ -0,0 +1,68 @@ +CPSW Port's Interface Mode Selection PHY Tree Bindings +----------------------------------------------- + +TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports +two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces. +The interface mode is selected by configuring the MII mode selection register(s) +(GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and +bit fields placement in SCM are different between SoCs while fields meaning +is the same. + +--------------+ + +-------------------------------+ |SCM | + | CPSW | | +---------+ | + | +--------------------------------+gmii_sel | | + | | | | +---------+ | + | +----v---+ +--------+ | +--------------+ + | |Port 1..<--+-->GMII/MII<-------> + | | | | | | | + | +--------+ | +--------+ | + | | | + | | +--------+ | + | | | RMII <-------> + | +--> | | + | | +--------+ | + | | | + | | +--------+ | + | | | RGMII <-------> + | +--> | | + | +--------+ | + +-------------------------------+ + +CPSW Port's Interface Mode Selection PHY describes MII interface mode between +CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration. + +CPSW Port's Interface Mode Selection PHY device should defined as child device +of SCM node (scm_conf) and can be attached to each CPSW port node using standard +PHY bindings (See phy/phy-bindings.txt). + +Required properties: +- compatible : Should be "ti,am3352-phy-gmii-sel" for am335x platform + "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform + "ti,am43xx-phy-gmii-sel" for am43xx platform + "ti,dm814-phy-gmii-sel" for dm814x platform +- reg : Address and length of the register set for the device +- #phy-cells : must be 2. + cell 1 - CPSW port number (starting from 1) + cell 2 - RMII refclk mode + +Examples: + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am3352-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; + + mac: ethernet@4a100000 { + compatible = "ti,am335x-cpsw","ti,cpsw"; + ... + + cpsw_emac0: slave@4a100200 { + ... + phys = <&phy_gmii_sel 1 1>; + }; + + cpsw_emac1: slave@4a100300 { + ... + phys = <&phy_gmii_sel 2 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 529e51879fb2..adae82385dd6 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -80,15 +80,19 @@ Optional properties: controller. It's expected that a mux state of 0 indicates device mode and a mux state of 1 indicates host mode. - mux-control-names: Shall be "usb_switch" if mux-controls is specified. -- pinctrl-names: Names for optional pin modes in "default", "host", "device" +- pinctrl-names: Names for optional pin modes in "default", "host", "device". + In case of HSIC-mode, "idle" and "active" pin modes are mandatory. In this + case, the "idle" state needs to pull down the data and strobe pin + and the "active" state needs to pull up the strobe pin. - pinctrl-n: alternate pin modes i.mx specific properties - fsl,usbmisc: phandler of non-core register device, with one argument that indicate usb controller index - disable-over-current: disable over current detect -- over-current-active-high: over current signal polarity is high active, - typically over current signal polarity is low active. +- over-current-active-low: over current signal polarity is active low. +- over-current-active-high: over current signal polarity is active high. + It's recommended to specify the over current polarity. - external-vbus-divider: enables off-chip resistor divider for Vbus Example: @@ -111,3 +115,29 @@ Example: mux-controls = <&usb_switch>; mux-control-names = "usb_switch"; }; + +Example for HSIC: + + usb@2184400 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc 2>; + phy_type = "hsic"; + dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + pinctrl-names = "idle", "active"; + pinctrl-0 = <&pinctrl_usbh2_idle>; + pinctrl-1 = <&pinctrl_usbh2_active>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: smsc@1 { + compatible = "usb424,9730"; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 636630fb92d7..8e5265e9f658 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -37,7 +37,11 @@ Optional properties: - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" or "usb3-phy". - resets: a single pair of phandle and reset specifier + - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable + - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command + failure SW work-around for DWC_usb31 version 1.70a-ea06 + and prior. - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled diff --git a/Documentation/driver-api/usb/index.rst b/Documentation/driver-api/usb/index.rst index 8fe995a1ec94..cfa8797ea614 100644 --- a/Documentation/driver-api/usb/index.rst +++ b/Documentation/driver-api/usb/index.rst @@ -19,6 +19,7 @@ Linux USB API dwc3 writing_musb_glue_layer typec + typec_bus usb3-debug-port .. only:: subproject and html diff --git a/Documentation/driver-api/usb/typec.rst b/Documentation/driver-api/usb/typec.rst index 48ff58095f11..201163d8c13e 100644 --- a/Documentation/driver-api/usb/typec.rst +++ b/Documentation/driver-api/usb/typec.rst @@ -1,3 +1,4 @@ +.. _typec: USB Type-C connector class ========================== diff --git a/Documentation/driver-api/usb/typec_bus.rst b/Documentation/driver-api/usb/typec_bus.rst index d5eec1715b5b..f47a69bff498 100644 --- a/Documentation/driver-api/usb/typec_bus.rst +++ b/Documentation/driver-api/usb/typec_bus.rst @@ -13,10 +13,10 @@ every alternate mode, so every alternate mode will need a custom driver. USB Type-C bus allows binding a driver to the discovered partner alternate modes by using the SVID and the mode number. -USB Type-C Connector Class provides a device for every alternate mode a port -supports, and separate device for every alternate mode the partner supports. -The drivers for the alternate modes are bound to the partner alternate mode -devices, and the port alternate mode devices must be handled by the port +:ref:`USB Type-C Connector Class <typec>` provides a device for every alternate +mode a port supports, and separate device for every alternate mode the partner +supports. The drivers for the alternate modes are bound to the partner alternate +mode devices, and the port alternate mode devices must be handled by the port drivers. When a new partner alternate mode device is registered, it is linked to the @@ -46,7 +46,7 @@ enter any modes on their own. ``->vdm`` is the most important callback in the operation callbacks vector. It will be used to deliver all the SVID specific commands from the partner to the alternate mode driver, and vice versa in case of port drivers. The drivers send -the SVID specific commands to each other using :c:func:`typec_altmode_vmd()`. +the SVID specific commands to each other using :c:func:`typec_altmode_vdm()`. If the communication with the partner using the SVID specific commands results in need to reconfigure the pins on the connector, the alternate mode driver @@ -67,15 +67,15 @@ Type-C Specification, and also put the connector back to ``TYPEC_STATE_USB`` after the mode has been exited. An example of working definitions for SVID specific pin configurations would -look like this: +look like this:: -enum { - ALTMODEX_CONF_A = TYPEC_STATE_MODAL, - ALTMODEX_CONF_B, - ... -}; + enum { + ALTMODEX_CONF_A = TYPEC_STATE_MODAL, + ALTMODEX_CONF_B, + ... + }; -Helper macro ``TYPEC_MODAL_STATE()`` can also be used: +Helper macro ``TYPEC_MODAL_STATE()`` can also be used:: #define ALTMODEX_CONF_A = TYPEC_MODAL_STATE(0); #define ALTMODEX_CONF_B = TYPEC_MODAL_STATE(1); diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt index c7e985f05d8f..f901ec77439c 100644 --- a/Documentation/usb/authorization.txt +++ b/Documentation/usb/authorization.txt @@ -119,5 +119,5 @@ If a deauthorized interface will be authorized so the driver probing must be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe For drivers that need multiple interfaces all needed interfaces should be -authroized first. After that the drivers should be probed. +authorized first. After that the drivers should be probed. This avoids side effects. diff --git a/MAINTAINERS b/MAINTAINERS index 67e448eab276..8ea5ae35d720 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6310,6 +6310,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git S: Supported F: drivers/phy/ F: include/linux/phy/ +F: Documentation/devicetree/bindings/phy/ GENERIC PINCTRL I2C DEMULTIPLEXER DRIVER M: Wolfram Sang <wsa+renesas@sang-engineering.com> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index f1dab0b55769..6a059d6ee03f 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -1165,28 +1165,13 @@ static void mvpp22_gop_setup_irq(struct mvpp2_port *port) */ static int mvpp22_comphy_init(struct mvpp2_port *port) { - enum phy_mode mode; int ret; if (!port->comphy) return 0; - switch (port->phy_interface) { - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_1000BASEX: - mode = PHY_MODE_SGMII; - break; - case PHY_INTERFACE_MODE_2500BASEX: - mode = PHY_MODE_2500SGMII; - break; - case PHY_INTERFACE_MODE_10GKR: - mode = PHY_MODE_10GKR; - break; - default: - return -EINVAL; - } - - ret = phy_set_mode(port->comphy, mode); + ret = phy_set_mode_ext(port->comphy, PHY_MODE_ETHERNET, + port->phy_interface); if (ret) return ret; diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 0dca2fa51dc3..215a45374d7b 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -471,7 +471,6 @@ static int ocelot_port_open(struct net_device *dev) { struct ocelot_port *port = netdev_priv(dev); struct ocelot *ocelot = port->ocelot; - enum phy_mode phy_mode; int err; /* Enable receiving frames on the port, and activate auto-learning of @@ -483,12 +482,8 @@ static int ocelot_port_open(struct net_device *dev) ANA_PORT_PORT_CFG, port->chip_port); if (port->serdes) { - if (port->phy_mode == PHY_INTERFACE_MODE_SGMII) - phy_mode = PHY_MODE_SGMII; - else - phy_mode = PHY_MODE_QSGMII; - - err = phy_set_mode(port->serdes, phy_mode); + err = phy_set_mode_ext(port->serdes, PHY_MODE_ETHERNET, + port->phy_mode); if (err) { netdev_err(dev, "Could not set mode of SerDes\n"); return err; diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 0e8f61a29479..a591583d120e 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -26,6 +26,7 @@ #include <linux/netdevice.h> #include <linux/net_tstamp.h> #include <linux/phy.h> +#include <linux/phy/phy.h> #include <linux/workqueue.h> #include <linux/delay.h> #include <linux/pm_runtime.h> @@ -387,6 +388,7 @@ struct cpsw_slave_data { int phy_if; u8 mac_addr[ETH_ALEN]; u16 dual_emac_res_vlan; /* Reserved VLAN for DualEMAC */ + struct phy *ifphy; }; struct cpsw_platform_data { @@ -1624,7 +1626,12 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) phy_start(slave->phy); /* Configure GMII_SEL register */ - cpsw_phy_sel(cpsw->dev, slave->phy->interface, slave->slave_num); + if (!IS_ERR(slave->data->ifphy)) + phy_set_mode_ext(slave->data->ifphy, PHY_MODE_ETHERNET, + slave->data->phy_if); + else + cpsw_phy_sel(cpsw->dev, slave->phy->interface, + slave->slave_num); } static inline void cpsw_add_default_vlan(struct cpsw_priv *priv) @@ -3274,6 +3281,16 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, if (!of_node_name_eq(slave_node, "slave")) continue; + slave_data->ifphy = devm_of_phy_get(&pdev->dev, slave_node, + NULL); + if (!IS_ENABLED(CONFIG_TI_CPSW_PHY_SEL) && + IS_ERR(slave_data->ifphy)) { + ret = PTR_ERR(slave_data->ifphy); + dev_err(&pdev->dev, + "%d: Error retrieving port phy: %d\n", i, ret); + return ret; + } + slave_data->phy_node = of_parse_phandle(slave_node, "phy-handle", 0); parp = of_get_property(slave_node, "phy_id", &lenp); diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 60f949e2a684..250abe290ca1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -15,6 +15,14 @@ config GENERIC_PHY phy users can obtain reference to the PHY. All the users of this framework should select this config. +config GENERIC_PHY_MIPI_DPHY + bool + help + Generic MIPI D-PHY support. + + Provides a number of helpers a core functions for MIPI D-PHY + drivers to us. + config PHY_LPC18XX_USB_OTG tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" depends on OF && (ARCH_LPC18XX || COMPILE_TEST) @@ -44,6 +52,7 @@ source "drivers/phy/allwinner/Kconfig" source "drivers/phy/amlogic/Kconfig" source "drivers/phy/broadcom/Kconfig" source "drivers/phy/cadence/Kconfig" +source "drivers/phy/freescale/Kconfig" source "drivers/phy/hisilicon/Kconfig" source "drivers/phy/lantiq/Kconfig" source "drivers/phy/marvell/Kconfig" diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 0301e25d07c1..0d9fddc498a6 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -4,6 +4,7 @@ # obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o @@ -16,6 +17,7 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-y += broadcom/ \ cadence/ \ + freescale/ \ hisilicon/ \ marvell/ \ motorola/ \ diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index d4dcd39b8d76..5163097b43df 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -115,6 +115,7 @@ enum sun4i_usb_phy_type { sun8i_r40_phy, sun8i_v3s_phy, sun50i_a64_phy, + sun50i_h6_phy, }; struct sun4i_usb_phy_cfg { @@ -126,6 +127,7 @@ struct sun4i_usb_phy_cfg { bool dedicated_clocks; bool enable_pmu_unk1; bool phy0_dual_route; + int missing_phys; }; struct sun4i_usb_phy_data { @@ -294,7 +296,8 @@ static int sun4i_usb_phy_init(struct phy *_phy) return ret; } - if (data->cfg->type == sun8i_a83t_phy) { + if (data->cfg->type == sun8i_a83t_phy || + data->cfg->type == sun50i_h6_phy) { if (phy->index == 0) { val = readl(data->base + data->cfg->phyctl_offset); val |= PHY_CTL_VBUSVLDEXT; @@ -343,7 +346,8 @@ static int sun4i_usb_phy_exit(struct phy *_phy) struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); if (phy->index == 0) { - if (data->cfg->type == sun8i_a83t_phy) { + if (data->cfg->type == sun8i_a83t_phy || + data->cfg->type == sun50i_h6_phy) { void __iomem *phyctl = data->base + data->cfg->phyctl_offset; @@ -474,7 +478,8 @@ static int sun4i_usb_phy_power_off(struct phy *_phy) return 0; } -static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode) +static int sun4i_usb_phy_set_mode(struct phy *_phy, + enum phy_mode mode, int submode) { struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); @@ -646,6 +651,9 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev, if (args->args[0] >= data->cfg->num_phys) return ERR_PTR(-ENODEV); + if (data->cfg->missing_phys & BIT(args->args[0])) + return ERR_PTR(-ENODEV); + return data->phys[args->args[0]].phy; } @@ -741,6 +749,9 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) struct sun4i_usb_phy *phy = data->phys + i; char name[16]; + if (data->cfg->missing_phys & BIT(i)) + continue; + snprintf(name, sizeof(name), "usb%d_vbus", i); phy->vbus = devm_regulator_get_optional(dev, name); if (IS_ERR(phy->vbus)) { @@ -952,6 +963,17 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { .phy0_dual_route = true, }; +static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { + .num_phys = 4, + .type = sun50i_h6_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .enable_pmu_unk1 = true, + .phy0_dual_route = true, + .missing_phys = BIT(1) | BIT(2), +}; + static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg }, { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg }, @@ -965,6 +987,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg }, { .compatible = "allwinner,sun50i-a64-usb-phy", .data = &sun50i_a64_cfg}, + { .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg }, { }, }; MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c index 9f9b5414b97a..148ef0bdb9c1 100644 --- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c +++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c @@ -152,7 +152,8 @@ static int phy_meson_gxl_usb2_reset(struct phy *phy) return 0; } -static int phy_meson_gxl_usb2_set_mode(struct phy *phy, enum phy_mode mode) +static int phy_meson_gxl_usb2_set_mode(struct phy *phy, + enum phy_mode mode, int submode) { struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); @@ -209,7 +210,7 @@ static int phy_meson_gxl_usb2_power_on(struct phy *phy) /* power on the PHY by taking it out of reset mode */ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, 0); - ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode); + ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode, 0); if (ret) { phy_meson_gxl_usb2_power_off(phy); diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb3.c b/drivers/phy/amlogic/phy-meson-gxl-usb3.c index d37d94ddf9c0..c0e9e4c16149 100644 --- a/drivers/phy/amlogic/phy-meson-gxl-usb3.c +++ b/drivers/phy/amlogic/phy-meson-gxl-usb3.c @@ -119,7 +119,8 @@ static int phy_meson_gxl_usb3_power_off(struct phy *phy) return 0; } -static int phy_meson_gxl_usb3_set_mode(struct phy *phy, enum phy_mode mode) +static int phy_meson_gxl_usb3_set_mode(struct phy *phy, + enum phy_mode mode, int submode) { struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); @@ -164,7 +165,7 @@ static int phy_meson_gxl_usb3_init(struct phy *phy) if (ret) goto err_disable_clk_phy; - ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode); + ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode, 0); if (ret) goto err_disable_clk_peripheral; diff --git a/drivers/phy/cadence/Kconfig b/drivers/phy/cadence/Kconfig index 57fff7de4031..2b8c0851ff33 100644 --- a/drivers/phy/cadence/Kconfig +++ b/drivers/phy/cadence/Kconfig @@ -1,5 +1,5 @@ # -# Phy driver for Cadence MHDP DisplayPort controller +# Phy drivers for Cadence PHYs # config PHY_CADENCE_DP tristate "Cadence MHDP DisplayPort PHY driver" @@ -8,3 +8,10 @@ config PHY_CADENCE_DP select GENERIC_PHY help Support for Cadence MHDP DisplayPort PHY. + +config PHY_CADENCE_SIERRA + tristate "Cadence Sierra PHY Driver" + depends on OF && HAS_IOMEM && RESET_CONTROLLER + select GENERIC_PHY + help + Enable this to support the Cadence Sierra PHY driver
\ No newline at end of file diff --git a/drivers/phy/cadence/Makefile b/drivers/phy/cadence/Makefile index e5b0a11cf28a..412349af0492 100644 --- a/drivers/phy/cadence/Makefile +++ b/drivers/phy/cadence/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_PHY_CADENCE_DP) += phy-cadence-dp.o +obj-$(CONFIG_PHY_CADENCE_SIERRA) += phy-cadence-sierra.o diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c new file mode 100644 index 000000000000..de10402f2931 --- /dev/null +++ b/drivers/phy/cadence/phy-cadence-sierra.c @@ -0,0 +1,395 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence Sierra PHY Driver + * + * Copyright (c) 2018 Cadence Design Systems + * Author: Alan Douglas <adouglas@cadence.com> + * + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <dt-bindings/phy/phy.h> + +/* PHY register offsets */ +#define SIERRA_PHY_PLL_CFG (0xc00e << 2) +#define SIERRA_DET_STANDEC_A (0x4000 << 2) +#define SIERRA_DET_STANDEC_B (0x4001 << 2) +#define SIERRA_DET_STANDEC_C (0x4002 << 2) +#define SIERRA_DET_STANDEC_D (0x4003 << 2) +#define SIERRA_DET_STANDEC_E (0x4004 << 2) +#define SIERRA_PSM_LANECAL (0x4008 << 2) +#define SIERRA_PSM_DIAG (0x4015 << 2) +#define SIERRA_PSC_TX_A0 (0x4028 << 2) +#define SIERRA_PSC_TX_A1 (0x4029 << 2) +#define SIERRA_PSC_TX_A2 (0x402A << 2) +#define SIERRA_PSC_TX_A3 (0x402B << 2) +#define SIERRA_PSC_RX_A0 (0x4030 << 2) +#define SIERRA_PSC_RX_A1 (0x4031 << 2) +#define SIERRA_PSC_RX_A2 (0x4032 << 2) +#define SIERRA_PSC_RX_A3 (0x4033 << 2) +#define SIERRA_PLLCTRL_SUBRATE (0x403A << 2) +#define SIERRA_PLLCTRL_GEN_D (0x403E << 2) +#define SIERRA_DRVCTRL_ATTEN (0x406A << 2) +#define SIERRA_CLKPATHCTRL_TMR (0x4081 << 2) +#define SIERRA_RX_CREQ_FLTR_A_MODE1 (0x4087 << 2) +#define SIERRA_RX_CREQ_FLTR_A_MODE0 (0x4088 << 2) +#define SIERRA_CREQ_CCLKDET_MODE01 (0x408E << 2) +#define SIERRA_RX_CTLE_MAINTENANCE (0x4091 << 2) +#define SIERRA_CREQ_FSMCLK_SEL (0x4092 << 2) +#define SIERRA_CTLELUT_CTRL (0x4098 << 2) +#define SIERRA_DFE_ECMP_RATESEL (0x40C0 << 2) +#define SIERRA_DFE_SMP_RATESEL (0x40C1 << 2) +#define SIERRA_DEQ_VGATUNE_CTRL (0x40E1 << 2) +#define SIERRA_TMRVAL_MODE3 (0x416E << 2) +#define SIERRA_TMRVAL_MODE2 (0x416F << 2) +#define SIERRA_TMRVAL_MODE1 (0x4170 << 2) +#define SIERRA_TMRVAL_MODE0 (0x4171 << 2) +#define SIERRA_PICNT_MODE1 (0x4174 << 2) +#define SIERRA_CPI_OUTBUF_RATESEL (0x417C << 2) +#define SIERRA_LFPSFILT_NS (0x418A << 2) +#define SIERRA_LFPSFILT_RD (0x418B << 2) +#define SIERRA_LFPSFILT_MP (0x418C << 2) +#define SIERRA_SDFILT_H2L_A (0x4191 << 2) + +#define SIERRA_MACRO_ID 0x00007364 +#define SIERRA_MAX_LANES 4 + +struct cdns_sierra_inst { + struct phy *phy; + u32 phy_type; + u32 num_lanes; + u32 mlane; + struct reset_control *lnk_rst; +}; + +struct cdns_reg_pairs { + u16 val; + u32 off; +}; + +struct cdns_sierra_data { + u32 id_value; + u32 pcie_regs; + u32 usb_regs; + struct cdns_reg_pairs *pcie_vals; + struct cdns_reg_pairs *usb_vals; +}; + +struct cdns_sierra_phy { + struct device *dev; + void __iomem *base; + struct cdns_sierra_data *init_data; + struct cdns_sierra_inst phys[SIERRA_MAX_LANES]; + struct reset_control *phy_rst; + struct reset_control *apb_rst; + struct clk *clk; + int nsubnodes; + bool autoconf; +}; + +static void cdns_sierra_phy_init(struct phy *gphy) +{ + struct cdns_sierra_inst *ins = phy_get_drvdata(gphy); + struct cdns_sierra_phy *phy = dev_get_drvdata(gphy->dev.parent); + int i, j; + struct cdns_reg_pairs *vals; + u32 num_regs; + + if (ins->phy_type == PHY_TYPE_PCIE) { + num_regs = phy->init_data->pcie_regs; + vals = phy->init_data->pcie_vals; + } else if (ins->phy_type == PHY_TYPE_USB3) { + num_regs = phy->init_data->usb_regs; + vals = phy->init_data->usb_vals; + } else { + return; + } + for (i = 0; i < ins->num_lanes; i++) + for (j = 0; j < num_regs ; j++) + writel(vals[j].val, phy->base + + vals[j].off + (i + ins->mlane) * 0x800); +} + +static int cdns_sierra_phy_on(struct phy *gphy) +{ + struct cdns_sierra_inst *ins = phy_get_drvdata(gphy); + + /* Take the PHY lane group out of reset */ + return reset_control_deassert(ins->lnk_rst); +} + +static int cdns_sierra_phy_off(struct phy *gphy) +{ + struct cdns_sierra_inst *ins = phy_get_drvdata(gphy); + + return reset_control_assert(ins->lnk_rst); +} + +static const struct phy_ops ops = { + .power_on = cdns_sierra_phy_on, + .power_off = cdns_sierra_phy_off, + .owner = THIS_MODULE, +}; + +static int cdns_sierra_get_optional(struct cdns_sierra_inst *inst, + struct device_node *child) +{ + if (of_property_read_u32(child, "reg", &inst->mlane)) + return -EINVAL; + + if (of_property_read_u32(child, "cdns,num-lanes", &inst->num_lanes)) + return -EINVAL; + + if (of_property_read_u32(child, "cdns,phy-type", &inst->phy_type)) + return -EINVAL; + + return 0; +} + +static const struct of_device_id cdns_sierra_id_table[]; + +static int cdns_sierra_phy_probe(struct platform_device *pdev) +{ + struct cdns_sierra_phy *sp; + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + const struct of_device_id *match; + struct resource *res; + int i, ret, node = 0; + struct device_node *dn = dev->of_node, *child; + + if (of_get_child_count(dn) == 0) + return -ENODEV; + + sp = devm_kzalloc(dev, sizeof(*sp), GFP_KERNEL); + if (!sp) + return -ENOMEM; + dev_set_drvdata(dev, sp); + sp->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sp->base = devm_ioremap_resource(dev, res); + if (IS_ERR(sp->base)) { + dev_err(dev, "missing \"reg\"\n"); + return PTR_ERR(sp->base); + } + + /* Get init data for this PHY */ + match = of_match_device(cdns_sierra_id_table, dev); + if (!match) + return -EINVAL; + sp->init_data = (struct cdns_sierra_data *)match->data; + + platform_set_drvdata(pdev, sp); + + sp->clk = devm_clk_get(dev, "phy_clk"); + if (IS_ERR(sp->clk)) { + dev_err(dev, "failed to get clock phy_clk\n"); + return PTR_ERR(sp->clk); + } + + sp->phy_rst = devm_reset_control_get(dev, "sierra_reset"); + if (IS_ERR(sp->phy_rst)) { + dev_err(dev, "failed to get reset\n"); + return PTR_ERR(sp->phy_rst); + } + + sp->apb_rst = devm_reset_control_get(dev, "sierra_apb"); + if (IS_ERR(sp->apb_rst)) { + dev_err(dev, "failed to get apb reset\n"); + return PTR_ERR(sp->apb_rst); + } + + ret = clk_prepare_enable(sp->clk); + if (ret) + return ret; + + /* Enable APB */ + reset_control_deassert(sp->apb_rst); + + /* Check that PHY is present */ + if (sp->init_data->id_value != readl(sp->base)) { + ret = -EINVAL; + goto clk_disable; + } + + sp->autoconf = of_property_read_bool(dn, "cdns,autoconf"); + + for_each_available_child_of_node(dn, child) { + struct phy *gphy; + + sp->phys[node].lnk_rst = + of_reset_control_get_exclusive_by_index(child, 0); + + if (IS_ERR(sp->phys[node].lnk_rst)) { + dev_err(dev, "failed to get reset %s\n", + child->full_name); + ret = PTR_ERR(sp->phys[node].lnk_rst); + goto put_child2; + } + + if (!sp->autoconf) { + ret = cdns_sierra_get_optional(&sp->phys[node], child); + if (ret) { + dev_err(dev, "missing property in node %s\n", + child->name); + goto put_child; + } + } + + gphy = devm_phy_create(dev, child, &ops); + + if (IS_ERR(gphy)) { + ret = PTR_ERR(gphy); + goto put_child; + } + sp->phys[node].phy = gphy; + phy_set_drvdata(gphy, &sp->phys[node]); + + /* Initialise the PHY registers, unless auto configured */ + if (!sp->autoconf) + cdns_sierra_phy_init(gphy); + + node++; + } + sp->nsubnodes = node; + + /* If more than one subnode, configure the PHY as multilink */ + if (!sp->autoconf && sp->nsubnodes > 1) + writel(2, sp->base + SIERRA_PHY_PLL_CFG); + + pm_runtime_enable(dev); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + reset_control_deassert(sp->phy_rst); + return PTR_ERR_OR_ZERO(phy_provider); + +put_child: + node++; +put_child2: + for (i = 0; i < node; i++) + reset_control_put(sp->phys[i].lnk_rst); + of_node_put(child); +clk_disable: + clk_disable_unprepare(sp->clk); + reset_control_assert(sp->apb_rst); + return ret; +} + +static int cdns_sierra_phy_remove(struct platform_device *pdev) +{ + struct cdns_sierra_phy *phy = dev_get_drvdata(pdev->dev.parent); + int i; + + reset_control_assert(phy->phy_rst); + reset_control_assert(phy->apb_rst); + pm_runtime_disable(&pdev->dev); + + /* + * The device level resets will be put automatically. + * Need to put the subnode resets here though. + */ + for (i = 0; i < phy->nsubnodes; i++) { + reset_control_assert(phy->phys[i].lnk_rst); + reset_control_put(phy->phys[i].lnk_rst); + } + return 0; +} + +static struct cdns_reg_pairs cdns_usb_regs[] = { + /* + * Write USB configuration parameters to the PHY. + * These values are specific to this specific hardware + * configuration. + */ + {0xFE0A, SIERRA_DET_STANDEC_A}, + {0x000F, SIERRA_DET_STANDEC_B}, + {0x55A5, SIERRA_DET_STANDEC_C}, + {0x69AD, SIERRA_DET_STANDEC_D}, + {0x0241, SIERRA_DET_STANDEC_E}, + {0x0110, SIERRA_PSM_LANECAL}, + {0xCF00, SIERRA_PSM_DIAG}, + {0x001F, SIERRA_PSC_TX_A0}, + {0x0007, SIERRA_PSC_TX_A1}, + {0x0003, SIERRA_PSC_TX_A2}, + {0x0003, SIERRA_PSC_TX_A3}, + {0x0FFF, SIERRA_PSC_RX_A0}, + {0x0003, SIERRA_PSC_RX_A1}, + {0x0003, SIERRA_PSC_RX_A2}, + {0x0001, SIERRA_PSC_RX_A3}, + {0x0001, SIERRA_PLLCTRL_SUBRATE}, + {0x0406, SIERRA_PLLCTRL_GEN_D}, + {0x0000, SIERRA_DRVCTRL_ATTEN}, + {0x823E, SIERRA_CLKPATHCTRL_TMR}, + {0x078F, SIERRA_RX_CREQ_FLTR_A_MODE1}, + {0x078F, SIERRA_RX_CREQ_FLTR_A_MODE0}, + {0x7B3C, SIERRA_CREQ_CCLKDET_MODE01}, + {0x023C, SIERRA_RX_CTLE_MAINTENANCE}, + {0x3232, SIERRA_CREQ_FSMCLK_SEL}, + {0x8452, SIERRA_CTLELUT_CTRL}, + {0x4121, SIERRA_DFE_ECMP_RATESEL}, + {0x4121, SIERRA_DFE_SMP_RATESEL}, + {0x9999, SIERRA_DEQ_VGATUNE_CTRL}, + {0x0330, SIERRA_TMRVAL_MODE0}, + {0x01FF, SIERRA_PICNT_MODE1}, + {0x0009, SIERRA_CPI_OUTBUF_RATESEL}, + {0x000F, SIERRA_LFPSFILT_NS}, + {0x0009, SIERRA_LFPSFILT_RD}, + {0x0001, SIERRA_LFPSFILT_MP}, + {0x8013, SIERRA_SDFILT_H2L_A}, + {0x0400, SIERRA_TMRVAL_MODE1}, +}; + +static struct cdns_reg_pairs cdns_pcie_regs[] = { + /* + * Write PCIe configuration parameters to the PHY. + * These values are specific to this specific hardware + * configuration. + */ + {0x891f, SIERRA_DET_STANDEC_D}, + {0x0053, SIERRA_DET_STANDEC_E}, + {0x0400, SIERRA_TMRVAL_MODE2}, + {0x0200, SIERRA_TMRVAL_MODE3}, +}; + +static const struct cdns_sierra_data cdns_map_sierra = { + SIERRA_MACRO_ID, + ARRAY_SIZE(cdns_pcie_regs), + ARRAY_SIZE(cdns_usb_regs), + cdns_pcie_regs, + cdns_usb_regs +}; + +static const struct of_device_id cdns_sierra_id_table[] = { + { + .compatible = "cdns,sierra-phy-t0", + .data = &cdns_map_sierra, + }, + {} +}; +MODULE_DEVICE_TABLE(of, cdns_sierra_id_table); + +static struct platform_driver cdns_sierra_driver = { + .probe = cdns_sierra_phy_probe, + .remove = cdns_sierra_phy_remove, + .driver = { + .name = "cdns-sierra-phy", + .of_match_table = cdns_sierra_id_table, + }, +}; +module_platform_driver(cdns_sierra_driver); + +MODULE_ALIAS("platform:cdns_sierra"); +MODULE_AUTHOR("Cadence Design Systems"); +MODULE_DESCRIPTION("CDNS sierra phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig new file mode 100644 index 000000000000..f050bd4e97e0 --- /dev/null +++ b/drivers/phy/freescale/Kconfig @@ -0,0 +1,5 @@ +config PHY_FSL_IMX8MQ_USB + tristate "Freescale i.MX8M USB3 PHY" + depends on OF && HAS_IOMEM + select GENERIC_PHY + default SOC_IMX8MQ diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile new file mode 100644 index 000000000000..dc2b3f1f2f80 --- /dev/null +++ b/drivers/phy/freescale/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c new file mode 100644 index 000000000000..d6ea5ce8afa5 --- /dev/null +++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (c) 2017 NXP. */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define PHY_CTRL0 0x0 +#define PHY_CTRL0_REF_SSP_EN BIT(2) + +#define PHY_CTRL1 0x4 +#define PHY_CTRL1_RESET BIT(0) +#define PHY_CTRL1_COMMONONN BIT(1) +#define PHY_CTRL1_ATERESET BIT(3) +#define PHY_CTRL1_VDATSRCENB0 BIT(19) +#define PHY_CTRL1_VDATDETENB0 BIT(20) + +#define PHY_CTRL2 0x8 +#define PHY_CTRL2_TXENABLEN0 BIT(8) + +struct imx8mq_usb_phy { + struct phy *phy; + struct clk *clk; + void __iomem *base; +}; + +static int imx8mq_usb_phy_init(struct phy *phy) +{ + struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); + u32 value; + + value = readl(imx_phy->base + PHY_CTRL1); + value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0 | + PHY_CTRL1_COMMONONN); + value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET; + writel(value, imx_phy->base + PHY_CTRL1); + + value = readl(imx_phy->base + PHY_CTRL0); + value |= PHY_CTRL0_REF_SSP_EN; + writel(value, imx_phy->base + PHY_CTRL0); + + value = readl(imx_phy->base + PHY_CTRL2); + value |= PHY_CTRL2_TXENABLEN0; + writel(value, imx_phy->base + PHY_CTRL2); + + value = readl(imx_phy->base + PHY_CTRL1); + value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET); + writel(value, imx_phy->base + PHY_CTRL1); + + return 0; +} + +static int imx8mq_phy_power_on(struct phy *phy) +{ + struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); + + return clk_prepare_enable(imx_phy->clk); +} + +static int imx8mq_phy_power_off(struct phy *phy) +{ + struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); + + clk_disable_unprepare(imx_phy->clk); + + return 0; +} + +static struct phy_ops imx8mq_usb_phy_ops = { + .init = imx8mq_usb_phy_init, + .power_on = imx8mq_phy_power_on, + .power_off = imx8mq_phy_power_off, + .owner = THIS_MODULE, +}; + +static int imx8mq_usb_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct imx8mq_usb_phy *imx_phy; + struct resource *res; + + imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL); + if (!imx_phy) + return -ENOMEM; + + imx_phy->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(imx_phy->clk)) { + dev_err(dev, "failed to get imx8mq usb phy clock\n"); + return PTR_ERR(imx_phy->clk); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + imx_phy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(imx_phy->base)) + return PTR_ERR(imx_phy->base); + + imx_phy->phy = devm_phy_create(dev, NULL, &imx8mq_usb_phy_ops); + if (IS_ERR(imx_phy->phy)) + return PTR_ERR(imx_phy->phy); + + phy_set_drvdata(imx_phy->phy, imx_phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id imx8mq_usb_phy_of_match[] = { + {.compatible = "fsl,imx8mq-usb-phy",}, + { }, +}; +MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match); + +static struct platform_driver imx8mq_usb_phy_driver = { + .probe = imx8mq_usb_phy_probe, + .driver = { + .name = "imx8mq-usb-phy", + .of_match_table = imx8mq_usb_phy_of_match, + } +}; +module_platform_driver(imx8mq_usb_phy_driver); + +MODULE_DESCRIPTION("FSL IMX8MQ USB PHY driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c index 86a5f7b9448b..187cccde53b5 100644 --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c @@ -9,6 +9,7 @@ #include <linux/iopoll.h> #include <linux/mfd/syscon.h> #include <linux/module.h> +#include <linux/phy.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/regmap.h> @@ -114,43 +115,45 @@ #define MVEBU_COMPHY_LANES 6 #define MVEBU_COMPHY_PORTS 3 -struct mvebu_comhy_conf { +struct mvebu_comphy_conf { enum phy_mode mode; + int submode; unsigned lane; unsigned port; u32 mux; }; -#define MVEBU_COMPHY_CONF(_lane, _port, _mode, _mux) \ +#define MVEBU_COMPHY_CONF(_lane, _port, _submode, _mux) \ { \ .lane = _lane, \ .port = _port, \ - .mode = _mode, \ + .mode = PHY_MODE_ETHERNET, \ + .submode = _submode, \ .mux = _mux, \ } -static const struct mvebu_comhy_conf mvebu_comphy_cp110_modes[] = { +static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = { /* lane 0 */ - MVEBU_COMPHY_CONF(0, 1, PHY_MODE_SGMII, 0x1), - MVEBU_COMPHY_CONF(0, 1, PHY_MODE_2500SGMII, 0x1), + MVEBU_COMPHY_CONF(0, 1, PHY_INTERFACE_MODE_SGMII, 0x1), + MVEBU_COMPHY_CONF(0, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1), /* lane 1 */ - MVEBU_COMPHY_CONF(1, 2, PHY_MODE_SGMII, 0x1), - MVEBU_COMPHY_CONF(1, 2, PHY_MODE_2500SGMII, 0x1), + MVEBU_COMPHY_CONF(1, 2, PHY_INTERFACE_MODE_SGMII, 0x1), + MVEBU_COMPHY_CONF(1, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1), /* lane 2 */ - MVEBU_COMPHY_CONF(2, 0, PHY_MODE_SGMII, 0x1), - MVEBU_COMPHY_CONF(2, 0, PHY_MODE_2500SGMII, 0x1), - MVEBU_COMPHY_CONF(2, 0, PHY_MODE_10GKR, 0x1), + MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_SGMII, 0x1), + MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1), + MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1), /* lane 3 */ - MVEBU_COMPHY_CONF(3, 1, PHY_MODE_SGMII, 0x2), - MVEBU_COMPHY_CONF(3, 1, PHY_MODE_2500SGMII, 0x2), + MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2), + MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2), /* lane 4 */ - MVEBU_COMPHY_CONF(4, 0, PHY_MODE_SGMII, 0x2), - MVEBU_COMPHY_CONF(4, 0, PHY_MODE_2500SGMII, 0x2), - MVEBU_COMPHY_CONF(4, 0, PHY_MODE_10GKR, 0x2), - MVEBU_COMPHY_CONF(4, 1, PHY_MODE_SGMII, 0x1), + MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2), + MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2), + MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2), + MVEBU_COMPHY_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1), /* lane 5 */ - MVEBU_COMPHY_CONF(5, 2, PHY_MODE_SGMII, 0x1), - MVEBU_COMPHY_CONF(5, 2, PHY_MODE_2500SGMII, 0x1), + MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_SGMII, 0x1), + MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1), }; struct mvebu_comphy_priv { @@ -163,10 +166,12 @@ struct mvebu_comphy_lane { struct mvebu_comphy_priv *priv; unsigned id; enum phy_mode mode; + int submode; int port; }; -static int mvebu_comphy_get_mux(int lane, int port, enum phy_mode mode) +static int mvebu_comphy_get_mux(int lane, int port, + enum phy_mode mode, int submode) { int i, n = ARRAY_SIZE(mvebu_comphy_cp110_modes); @@ -177,7 +182,8 @@ static int mvebu_comphy_get_mux(int lane, int port, enum phy_mode mode) for (i = 0; i < n; i++) { if (mvebu_comphy_cp110_modes[i].lane == lane && mvebu_comphy_cp110_modes[i].port == port && - mvebu_comphy_cp110_modes[i].mode == mode) + mvebu_comphy_cp110_modes[i].mode == mode && + mvebu_comphy_cp110_modes[i].submode == submode) break; } @@ -187,8 +193,7 @@ static int mvebu_comphy_get_mux(int lane, int port, enum phy_mode mode) return mvebu_comphy_cp110_modes[i].mux; } -static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane, - enum phy_mode mode) +static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane) { struct mvebu_comphy_priv *priv = lane->priv; u32 val; @@ -206,14 +211,14 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane, MVEBU_COMPHY_SERDES_CFG0_HALF_BUS | MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xf) | MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xf)); - if (mode == PHY_MODE_10GKR) + if (lane->submode == PHY_INTERFACE_MODE_10GKR) val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xe) | MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xe); - else if (mode == PHY_MODE_2500SGMII) + else if (lane->submode == PHY_INTERFACE_MODE_2500BASEX) val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x8) | MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x8) | MVEBU_COMPHY_SERDES_CFG0_HALF_BUS; - else if (mode == PHY_MODE_SGMII) + else if (lane->submode == PHY_INTERFACE_MODE_SGMII) val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x6) | MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x6) | MVEBU_COMPHY_SERDES_CFG0_HALF_BUS; @@ -243,7 +248,7 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane, /* refclk selection */ val = readl(priv->base + MVEBU_COMPHY_MISC_CTRL0(lane->id)); val &= ~MVEBU_COMPHY_MISC_CTRL0_REFCLK_SEL; - if (mode == PHY_MODE_10GKR) + if (lane->submode == PHY_INTERFACE_MODE_10GKR) val |= MVEBU_COMPHY_MISC_CTRL0_ICP_FORCE; writel(val, priv->base + MVEBU_COMPHY_MISC_CTRL0(lane->id)); @@ -261,8 +266,7 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane, writel(val, priv->base + MVEBU_COMPHY_LOOPBACK(lane->id)); } -static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane, - enum phy_mode mode) +static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane) { struct mvebu_comphy_priv *priv = lane->priv; u32 val; @@ -303,13 +307,13 @@ static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane, return 0; } -static int mvebu_comphy_set_mode_sgmii(struct phy *phy, enum phy_mode mode) +static int mvebu_comphy_set_mode_sgmii(struct phy *phy) { struct mvebu_comphy_lane *lane = phy_get_drvdata(phy); struct mvebu_comphy_priv *priv = lane->priv; u32 val; - mvebu_comphy_ethernet_init_reset(lane, mode); + mvebu_comphy_ethernet_init_reset(lane); val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id)); val &= ~MVEBU_COMPHY_RX_CTRL1_CLK8T_EN; @@ -330,7 +334,7 @@ static int mvebu_comphy_set_mode_sgmii(struct phy *phy, enum phy_mode mode) val |= MVEBU_COMPHY_GEN1_S0_TX_EMPH(0x1); writel(val, priv->base + MVEBU_COMPHY_GEN1_S0(lane->id)); - return mvebu_comphy_init_plls(lane, PHY_MODE_SGMII); + return mvebu_comphy_init_plls(lane); } static int mvebu_comphy_set_mode_10gkr(struct phy *phy) @@ -339,7 +343,7 @@ static int mvebu_comphy_set_mode_10gkr(struct phy *phy) struct mvebu_comphy_priv *priv = lane->priv; u32 val; - mvebu_comphy_ethernet_init_reset(lane, PHY_MODE_10GKR); + mvebu_comphy_ethernet_init_reset(lane); val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id)); val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL | @@ -469,7 +473,7 @@ static int mvebu_comphy_set_mode_10gkr(struct phy *phy) val |= MVEBU_COMPHY_EXT_SELV_RX_SAMPL(0x1a); writel(val, priv->base + MVEBU_COMPHY_EXT_SELV(lane->id)); - return mvebu_comphy_init_plls(lane, PHY_MODE_10GKR); + return mvebu_comphy_init_plls(lane); } static int mvebu_comphy_power_on(struct phy *phy) @@ -479,7 +483,8 @@ static int mvebu_comphy_power_on(struct phy *phy) int ret, mux; u32 val; - mux = mvebu_comphy_get_mux(lane->id, lane->port, lane->mode); + mux = mvebu_comphy_get_mux(lane->id, lane->port, + lane->mode, lane->submode); if (mux < 0) return -ENOTSUPP; @@ -492,12 +497,12 @@ static int mvebu_comphy_power_on(struct phy *phy) val |= mux << MVEBU_COMPHY_SELECTOR_PHY(lane->id); regmap_write(priv->regmap, MVEBU_COMPHY_SELECTOR, val); - switch (lane->mode) { - case PHY_MODE_SGMII: - case PHY_MODE_2500SGMII: - ret = mvebu_comphy_set_mode_sgmii(phy, lane->mode); + switch (lane->submode) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_2500BASEX: + ret = mvebu_comphy_set_mode_sgmii(phy); break; - case PHY_MODE_10GKR: + case PHY_INTERFACE_MODE_10GKR: ret = mvebu_comphy_set_mode_10gkr(phy); break; default: @@ -512,14 +517,22 @@ static int mvebu_comphy_power_on(struct phy *phy) return ret; } -static int mvebu_comphy_set_mode(struct phy *phy, enum phy_mode mode) +static int mvebu_comphy_set_mode(struct phy *phy, + enum phy_mode mode, int submode) { struct mvebu_comphy_lane *lane = phy_get_drvdata(phy); - if (mvebu_comphy_get_mux(lane->id, lane->port, mode) < 0) + if (mode != PHY_MODE_ETHERNET) + return -EINVAL; + + if (submode == PHY_INTERFACE_MODE_1000BASEX) + submode = PHY_INTERFACE_MODE_SGMII; + + if (mvebu_comphy_get_mux(lane->id, lane->port, mode, submode) < 0) return -EINVAL; lane->mode = mode; + lane->submode = submode; return 0; } diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index 3eb8e1bd7b78..5b6a470ca145 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -971,7 +971,7 @@ static int mtk_phy_exit(struct phy *phy) return 0; } -static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode) +static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode) { struct mtk_phy_instance *instance = phy_get_drvdata(phy); struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent); diff --git a/drivers/phy/mediatek/phy-mtk-xsphy.c b/drivers/phy/mediatek/phy-mtk-xsphy.c index 020cd0227397..8c51131945c0 100644 --- a/drivers/phy/mediatek/phy-mtk-xsphy.c +++ b/drivers/phy/mediatek/phy-mtk-xsphy.c @@ -426,7 +426,7 @@ static int mtk_phy_exit(struct phy *phy) return 0; } -static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode) +static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode) { struct xsphy_instance *inst = phy_get_drvdata(phy); struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index 25d456a323c2..ee184d5607bd 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -16,6 +16,7 @@ #include <linux/gpio/consumer.h> #include <linux/of_platform.h> #include <linux/phy/phy.h> +#include <linux/pinctrl/consumer.h> #define PHY_MDM6600_PHY_DELAY_MS 4000 /* PHY enable 2.2s to 3.5s */ #define PHY_MDM6600_ENABLED_DELAY_MS 8000 /* 8s more total for MDM6600 */ @@ -120,12 +121,22 @@ static int phy_mdm6600_power_on(struct phy *x) { struct phy_mdm6600 *ddata = phy_get_drvdata(x); struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE]; + int error; if (!ddata->enabled) return -ENODEV; + error = pinctrl_pm_select_default_state(ddata->dev); + if (error) + dev_warn(ddata->dev, "%s: error with default_state: %i\n", + __func__, error); + gpiod_set_value_cansleep(enable_gpio, 1); + /* Allow aggressive PM for USB, it's only needed for n_gsm port */ + if (pm_runtime_enabled(&x->dev)) + phy_pm_runtime_put(x); + return 0; } @@ -133,12 +144,26 @@ static int phy_mdm6600_power_off(struct phy *x) { struct phy_mdm6600 *ddata = phy_get_drvdata(x); struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE]; + int error; if (!ddata->enabled) return -ENODEV; + /* Paired with phy_pm_runtime_put() in phy_mdm6600_power_on() */ + if (pm_runtime_enabled(&x->dev)) { + error = phy_pm_runtime_get(x); + if (error < 0 && error != -EINPROGRESS) + dev_warn(ddata->dev, "%s: phy_pm_runtime_get: %i\n", + __func__, error); + } + gpiod_set_value_cansleep(enable_gpio, 0); + error = pinctrl_pm_select_sleep_state(ddata->dev); + if (error) + dev_warn(ddata->dev, "%s: error with sleep_state: %i\n", + __func__, error); + return 0; } @@ -529,28 +554,17 @@ static int phy_mdm6600_probe(struct platform_device *pdev) ddata->dev = &pdev->dev; platform_set_drvdata(pdev, ddata); + /* Active state selected in phy_mdm6600_power_on() */ + error = pinctrl_pm_select_sleep_state(ddata->dev); + if (error) + dev_warn(ddata->dev, "%s: error with sleep_state: %i\n", + __func__, error); + error = phy_mdm6600_init_lines(ddata); if (error) return error; phy_mdm6600_init_irq(ddata); - - ddata->generic_phy = devm_phy_create(ddata->dev, NULL, &gpio_usb_ops); - if (IS_ERR(ddata->generic_phy)) { - error = PTR_ERR(ddata->generic_phy); - goto cleanup; - } - - phy_set_drvdata(ddata->generic_phy, ddata); - - ddata->phy_provider = - devm_of_phy_provider_register(ddata->dev, - of_phy_simple_xlate); - if (IS_ERR(ddata->phy_provider)) { - error = PTR_ERR(ddata->phy_provider); - goto cleanup; - } - schedule_delayed_work(&ddata->bootup_work, 0); /* @@ -574,14 +588,31 @@ static int phy_mdm6600_probe(struct platform_device *pdev) if (error < 0) { dev_warn(ddata->dev, "failed to wake modem: %i\n", error); pm_runtime_put_noidle(ddata->dev); + goto cleanup; } + + ddata->generic_phy = devm_phy_create(ddata->dev, NULL, &gpio_usb_ops); + if (IS_ERR(ddata->generic_phy)) { + error = PTR_ERR(ddata->generic_phy); + goto idle; + } + + phy_set_drvdata(ddata->generic_phy, ddata); + + ddata->phy_provider = + devm_of_phy_provider_register(ddata->dev, + of_phy_simple_xlate); + if (IS_ERR(ddata->phy_provider)) + error = PTR_ERR(ddata->phy_provider); + +idle: pm_runtime_mark_last_busy(ddata->dev); pm_runtime_put_autosuspend(ddata->dev); - return 0; - cleanup: - phy_mdm6600_device_power_off(ddata); + if (error < 0) + phy_mdm6600_device_power_off(ddata); + return error; } diff --git a/drivers/phy/mscc/phy-ocelot-serdes.c b/drivers/phy/mscc/phy-ocelot-serdes.c index cbb49d9da6f9..77c46f639fbf 100644 --- a/drivers/phy/mscc/phy-ocelot-serdes.c +++ b/drivers/phy/mscc/phy-ocelot-serdes.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/phy.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/regmap.h> @@ -104,20 +105,24 @@ struct serdes_mux { u8 idx; u8 port; enum phy_mode mode; + int submode; u32 mask; u32 mux; }; -#define SERDES_MUX(_idx, _port, _mode, _mask, _mux) { \ +#define SERDES_MUX(_idx, _port, _mode, _submode, _mask, _mux) { \ .idx = _idx, \ .port = _port, \ .mode = _mode, \ + .submode = _submode, \ .mask = _mask, \ .mux = _mux, \ } -#define SERDES_MUX_SGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_SGMII, m, c) -#define SERDES_MUX_QSGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_QSGMII, m, c) +#define SERDES_MUX_SGMII(i, p, m, c) \ + SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_SGMII, m, c) +#define SERDES_MUX_QSGMII(i, p, m, c) \ + SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_QSGMII, m, c) static const struct serdes_mux ocelot_serdes_muxes[] = { SERDES_MUX_SGMII(SERDES1G(0), 0, 0, 0), @@ -154,22 +159,27 @@ static const struct serdes_mux ocelot_serdes_muxes[] = { SERDES_MUX_SGMII(SERDES6G(1), 8, 0, 0), SERDES_MUX_SGMII(SERDES6G(2), 10, HSIO_HW_CFG_PCIE_ENA | HSIO_HW_CFG_DEV2G5_10_MODE, 0), - SERDES_MUX(SERDES6G(2), 10, PHY_MODE_PCIE, HSIO_HW_CFG_PCIE_ENA, + SERDES_MUX(SERDES6G(2), 10, PHY_MODE_PCIE, 0, HSIO_HW_CFG_PCIE_ENA, HSIO_HW_CFG_PCIE_ENA), }; -static int serdes_set_mode(struct phy *phy, enum phy_mode mode) +static int serdes_set_mode(struct phy *phy, enum phy_mode mode, int submode) { struct serdes_macro *macro = phy_get_drvdata(phy); unsigned int i; int ret; + /* As of now only PHY_MODE_ETHERNET is supported */ + if (mode != PHY_MODE_ETHERNET) + return -EOPNOTSUPP; + for (i = 0; i < ARRAY_SIZE(ocelot_serdes_muxes); i++) { if (macro->idx != ocelot_serdes_muxes[i].idx || - mode != ocelot_serdes_muxes[i].mode) + mode != ocelot_serdes_muxes[i].mode || + submode != ocelot_serdes_muxes[i].submode) continue; - if (mode != PHY_MODE_QSGMII && + if (submode != PHY_INTERFACE_MODE_QSGMII && macro->port != ocelot_serdes_muxes[i].port) continue; diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c new file mode 100644 index 000000000000..465fa1b91a5f --- /dev/null +++ b/drivers/phy/phy-core-mipi-dphy.c @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2013 NVIDIA Corporation + * Copyright (C) 2018 Cadence Design Systems Inc. + */ + +#include <linux/errno.h> +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/time64.h> + +#include <linux/phy/phy.h> +#include <linux/phy/phy-mipi-dphy.h> + +#define PSEC_PER_SEC 1000000000000LL + +/* + * Minimum D-PHY timings based on MIPI D-PHY specification. Derived + * from the valid ranges specified in Section 6.9, Table 14, Page 41 + * of the D-PHY specification (v2.1). + */ +int phy_mipi_dphy_get_default_config(unsigned long pixel_clock, + unsigned int bpp, + unsigned int lanes, + struct phy_configure_opts_mipi_dphy *cfg) +{ + unsigned long long hs_clk_rate; + unsigned long long ui; + + if (!cfg) + return -EINVAL; + + hs_clk_rate = pixel_clock * bpp; + do_div(hs_clk_rate, lanes); + + ui = ALIGN(PSEC_PER_SEC, hs_clk_rate); + do_div(ui, hs_clk_rate); + + cfg->clk_miss = 0; + cfg->clk_post = 60000 + 52 * ui; + cfg->clk_pre = 8000; + cfg->clk_prepare = 38000; + cfg->clk_settle = 95000; + cfg->clk_term_en = 0; + cfg->clk_trail = 60000; + cfg->clk_zero = 262000; + cfg->d_term_en = 0; + cfg->eot = 0; + cfg->hs_exit = 100000; + cfg->hs_prepare = 40000 + 4 * ui; + cfg->hs_zero = 105000 + 6 * ui; + cfg->hs_settle = 85000 + 6 * ui; + cfg->hs_skip = 40000; + + /* + * The MIPI D-PHY specification (Section 6.9, v1.2, Table 14, Page 40) + * contains this formula as: + * + * T_HS-TRAIL = max(n * 8 * ui, 60 + n * 4 * ui) + * + * where n = 1 for forward-direction HS mode and n = 4 for reverse- + * direction HS mode. There's only one setting and this function does + * not parameterize on anything other that ui, so this code will + * assumes that reverse-direction HS mode is supported and uses n = 4. + */ + cfg->hs_trail = max(4 * 8 * ui, 60000 + 4 * 4 * ui); + + cfg->init = 100000000; + cfg->lpx = 60000; + cfg->ta_get = 5 * cfg->lpx; + cfg->ta_go = 4 * cfg->lpx; + cfg->ta_sure = 2 * cfg->lpx; + cfg->wakeup = 1000000000; + + cfg->hs_clk_rate = hs_clk_rate; + cfg->lanes = lanes; + + return 0; +} +EXPORT_SYMBOL(phy_mipi_dphy_get_default_config); + +/* + * Validate D-PHY configuration according to MIPI D-PHY specification + * (v1.2, Section Section 6.9 "Global Operation Timing Parameters"). + */ +int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg) +{ + unsigned long long ui; + + if (!cfg) + return -EINVAL; + + ui = ALIGN(PSEC_PER_SEC, cfg->hs_clk_rate); + do_div(ui, cfg->hs_clk_rate); + + if (cfg->clk_miss > 60000) + return -EINVAL; + + if (cfg->clk_post < (60000 + 52 * ui)) + return -EINVAL; + + if (cfg->clk_pre < 8000) + return -EINVAL; + + if (cfg->clk_prepare < 38000 || cfg->clk_prepare > 95000) + return -EINVAL; + + if (cfg->clk_settle < 95000 || cfg->clk_settle > 300000) + return -EINVAL; + + if (cfg->clk_term_en > 38000) + return -EINVAL; + + if (cfg->clk_trail < 60000) + return -EINVAL; + + if ((cfg->clk_prepare + cfg->clk_zero) < 300000) + return -EINVAL; + + if (cfg->d_term_en > (35000 + 4 * ui)) + return -EINVAL; + + if (cfg->eot > (105000 + 12 * ui)) + return -EINVAL; + + if (cfg->hs_exit < 100000) + return -EINVAL; + + if (cfg->hs_prepare < (40000 + 4 * ui) || + cfg->hs_prepare > (85000 + 6 * ui)) + return -EINVAL; + + if ((cfg->hs_prepare + cfg->hs_zero) < (145000 + 10 * ui)) + return -EINVAL; + + if ((cfg->hs_settle < (85000 + 6 * ui)) || + (cfg->hs_settle > (145000 + 10 * ui))) + return -EINVAL; + + if (cfg->hs_skip < 40000 || cfg->hs_skip > (55000 + 4 * ui)) + return -EINVAL; + + if (cfg->hs_trail < max(8 * ui, 60000 + 4 * ui)) + return -EINVAL; + + if (cfg->init < 100000000) + return -EINVAL; + + if (cfg->lpx < 50000) + return -EINVAL; + + if (cfg->ta_get != (5 * cfg->lpx)) + return -EINVAL; + + if (cfg->ta_go != (4 * cfg->lpx)) + return -EINVAL; + + if (cfg->ta_sure < cfg->lpx || cfg->ta_sure > (2 * cfg->lpx)) + return -EINVAL; + + if (cfg->wakeup < 1000000000) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL(phy_mipi_dphy_config_validate); diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 35fd38c5a4a1..19b05e824ee4 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -360,7 +360,7 @@ int phy_power_off(struct phy *phy) } EXPORT_SYMBOL_GPL(phy_power_off); -int phy_set_mode(struct phy *phy, enum phy_mode mode) +int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) { int ret; @@ -368,14 +368,14 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode) return 0; mutex_lock(&phy->mutex); - ret = phy->ops->set_mode(phy, mode); + ret = phy->ops->set_mode(phy, mode, submode); if (!ret) phy->attrs.mode = mode; mutex_unlock(&phy->mutex); return ret; } -EXPORT_SYMBOL_GPL(phy_set_mode); +EXPORT_SYMBOL_GPL(phy_set_mode_ext); int phy_reset(struct phy *phy) { @@ -408,6 +408,70 @@ int phy_calibrate(struct phy *phy) EXPORT_SYMBOL_GPL(phy_calibrate); /** + * phy_configure() - Changes the phy parameters + * @phy: the phy returned by phy_get() + * @opts: New configuration to apply + * + * Used to change the PHY parameters. phy_init() must have been called + * on the phy. The configuration will be applied on the current phy + * mode, that can be changed using phy_set_mode(). + * + * Returns: 0 if successful, an negative error code otherwise + */ +int phy_configure(struct phy *phy, union phy_configure_opts *opts) +{ + int ret; + + if (!phy) + return -EINVAL; + + if (!phy->ops->configure) + return -EOPNOTSUPP; + + mutex_lock(&phy->mutex); + ret = phy->ops->configure(phy, opts); + mutex_unlock(&phy->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_configure); + +/** + * phy_validate() - Checks the phy parameters + * @phy: the phy returned by phy_get() + * @mode: phy_mode the configuration is applicable to. + * @submode: PHY submode the configuration is applicable to. + * @opts: Configuration to check + * + * Used to check that the current set of parameters can be handled by + * the phy. Implementations are free to tune the parameters passed as + * arguments if needed by some implementation detail or + * constraints. It will not change any actual configuration of the + * PHY, so calling it as many times as deemed fit will have no side + * effect. + * + * Returns: 0 if successful, an negative error code otherwise + */ +int phy_validate(struct phy *phy, enum phy_mode mode, int submode, + union phy_configure_opts *opts) +{ + int ret; + + if (!phy) + return -EINVAL; + + if (!phy->ops->validate) + return -EOPNOTSUPP; + + mutex_lock(&phy->mutex); + ret = phy->ops->validate(phy, mode, submode, opts); + mutex_unlock(&phy->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_validate); + +/** * _of_phy_get() - lookup and obtain a reference to a phy by phandle * @np: device_node for which to get the phy * @index: the index of the phy diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index a83332411026..b4006818e1b6 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -72,6 +72,9 @@ #define MAX_PROP_NAME 32 +/* Define the assumed distance between lanes for underspecified device trees. */ +#define QMP_PHY_LEGACY_LANE_STRIDE 0x400 + struct qmp_phy_init_tbl { unsigned int offset; unsigned int val; @@ -733,9 +736,6 @@ struct qmp_phy_cfg { bool has_phy_dp_com_ctrl; /* true, if PHY has secondary tx/rx lanes to be configured */ bool is_dual_lane_phy; - /* Register offset of secondary tx/rx lanes for USB DP combo PHY */ - unsigned int tx_b_lane_offset; - unsigned int rx_b_lane_offset; /* true, if PCS block has no separate SW_RESET register */ bool no_pcs_sw_reset; @@ -748,6 +748,8 @@ struct qmp_phy_cfg { * @tx: iomapped memory space for lane's tx * @rx: iomapped memory space for lane's rx * @pcs: iomapped memory space for lane's pcs + * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs) + * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs) * @pcs_misc: iomapped memory space for lane's pcs_misc * @pipe_clk: pipe lock * @index: lane index @@ -759,6 +761,8 @@ struct qmp_phy { void __iomem *tx; void __iomem *rx; void __iomem *pcs; + void __iomem *tx2; + void __iomem *rx2; void __iomem *pcs_misc; struct clk *pipe_clk; unsigned int index; @@ -975,8 +979,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { .has_phy_dp_com_ctrl = true, .is_dual_lane_phy = true, - .tx_b_lane_offset = 0x400, - .rx_b_lane_offset = 0x400, }; static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { @@ -1031,9 +1033,6 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { .mask_pcs_ready = PCS_READY, .is_dual_lane_phy = true, - .tx_b_lane_offset = 0x400, - .rx_b_lane_offset = 0x400, - .no_pcs_sw_reset = true, }; @@ -1238,12 +1237,12 @@ static int qcom_qmp_phy_init(struct phy *phy) qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); /* Configuration for other LANE for USB-DP combo PHY */ if (cfg->is_dual_lane_phy) - qcom_qmp_phy_configure(tx + cfg->tx_b_lane_offset, cfg->regs, + qcom_qmp_phy_configure(qphy->tx2, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num); if (cfg->is_dual_lane_phy) - qcom_qmp_phy_configure(rx + cfg->rx_b_lane_offset, cfg->regs, + qcom_qmp_phy_configure(qphy->rx2, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num); qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); @@ -1365,7 +1364,8 @@ static int qcom_qmp_phy_poweron(struct phy *phy) return ret; } -static int qcom_qmp_phy_set_mode(struct phy *phy, enum phy_mode mode) +static int qcom_qmp_phy_set_mode(struct phy *phy, + enum phy_mode mode, int submode) { struct qmp_phy *qphy = phy_get_drvdata(phy); struct qcom_qmp *qmp = qphy->qmp; @@ -1542,6 +1542,11 @@ static int qcom_qmp_phy_clk_init(struct device *dev) return devm_clk_bulk_get(dev, num, qmp->clks); } +static void phy_pipe_clk_release_provider(void *res) +{ + of_clk_del_provider(res); +} + /* * Register a fixed rate pipe clock. * @@ -1588,7 +1593,23 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) fixed->fixed_rate = 125000000; fixed->hw.init = &init; - return devm_clk_hw_register(qmp->dev, &fixed->hw); + ret = devm_clk_hw_register(qmp->dev, &fixed->hw); + if (ret) + return ret; + + ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw); + if (ret) + return ret; + + /* + * Roll a devm action because the clock provider is the child node, but + * the child node is not actually a device. + */ + ret = devm_add_action(qmp->dev, phy_pipe_clk_release_provider, np); + if (ret) + phy_pipe_clk_release_provider(np); + + return ret; } static const struct phy_ops qcom_qmp_phy_gen_ops = { @@ -1614,8 +1635,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) /* * Get memory resources for each phy lane: - * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2; and - * pcs_misc (optional) -> 3. + * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2. + * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5 + * For single lane PHYs: pcs_misc (optional) -> 3. */ qphy->tx = of_iomap(np, 0); if (!qphy->tx) @@ -1629,7 +1651,32 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) if (!qphy->pcs) return -ENOMEM; - qphy->pcs_misc = of_iomap(np, 3); + /* + * If this is a dual-lane PHY, then there should be registers for the + * second lane. Some old device trees did not specify this, so fall + * back to old legacy behavior of assuming they can be reached at an + * offset from the first lane. + */ + if (qmp->cfg->is_dual_lane_phy) { + qphy->tx2 = of_iomap(np, 3); + qphy->rx2 = of_iomap(np, 4); + if (!qphy->tx2 || !qphy->rx2) { + dev_warn(dev, + "Underspecified device tree, falling back to legacy register regions\n"); + + /* In the old version, pcs_misc is at index 3. */ + qphy->pcs_misc = qphy->tx2; + qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE; + qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE; + + } else { + qphy->pcs_misc = of_iomap(np, 5); + } + + } else { + qphy->pcs_misc = of_iomap(np, 3); + } + if (!qphy->pcs_misc) dev_vdbg(dev, "PHY pcs_misc-reg not used\n"); diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index 6d4b44b569bc..9177989f22d1 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -425,7 +425,8 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy) HSTX_TRIM_MASK); } -static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode) +static int qusb2_phy_set_mode(struct phy *phy, + enum phy_mode mode, int submode) { struct qusb2_phy *qphy = phy_get_drvdata(phy); diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c index ba1895b76a5d..1e0d4f2046a4 100644 --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c +++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c @@ -65,7 +65,8 @@ static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy) } static -int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy, enum phy_mode mode) +int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy, + enum phy_mode mode, int submode) { struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c index 49f435c71147..aef40f7a41d4 100644 --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c +++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c @@ -84,7 +84,8 @@ static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy) } static -int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy, enum phy_mode mode) +int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy, + enum phy_mode mode, int submode) { struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c index abbbe75070da..04934f8dac91 100644 --- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c +++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c @@ -42,7 +42,8 @@ struct qcom_usb_hs_phy { struct notifier_block vbus_notify; }; -static int qcom_usb_hs_phy_set_mode(struct phy *phy, enum phy_mode mode) +static int qcom_usb_hs_phy_set_mode(struct phy *phy, + enum phy_mode mode, int submode) { struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy); u8 addr; diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index d0f412c25981..0a34782aaaa2 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -307,16 +307,21 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) void __iomem *usb2_base = ch->base; u32 val; + /* Should not use functions of read-modify-write a register */ + val = readl(usb2_base + USB2_LINECTRL1); + val = (val & ~USB2_LINECTRL1_DP_RPD) | USB2_LINECTRL1_DPRPD_EN | + USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD; + writel(val, usb2_base + USB2_LINECTRL1); + val = readl(usb2_base + USB2_VBCTRL); writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL); - writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA); - rcar_gen3_control_otg_irq(ch, 1); val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); - val = readl(usb2_base + USB2_LINECTRL1); - rcar_gen3_set_linectrl(ch, 0, 0); - writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN, - usb2_base + USB2_LINECTRL1); + + msleep(20); + + writel(0xffffffff, usb2_base + USB2_OBINTSTA); + writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTEN); rcar_gen3_device_recognition(ch); } diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index 24bd2717abdb..91fba60267a0 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -1168,8 +1168,8 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev) struct phy *phy; /* This driver aims to support both otg-port and host-port */ - if (of_node_cmp(child_np->name, "host-port") && - of_node_cmp(child_np->name, "otg-port")) + if (!of_node_name_eq(child_np, "host-port") && + !of_node_name_eq(child_np, "otg-port")) goto next_child; phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops); @@ -1183,7 +1183,7 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev) phy_set_drvdata(rport->phy, rport); /* initialize otg/host port separately */ - if (!of_node_cmp(child_np->name, "host-port")) { + if (of_node_name_eq(child_np, "host-port")) { ret = rockchip_usb2phy_host_port_init(rphy, rport, child_np); if (ret) diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index c57e496f0b0c..e32edeebcd63 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -1176,10 +1176,10 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev) for_each_available_child_of_node(np, child_np) { struct phy *phy; - if (!of_node_cmp(child_np->name, "dp-port")) + if (of_node_name_eq(child_np, "dp-port")) phy = devm_phy_create(dev, child_np, &rockchip_dp_phy_ops); - else if (!of_node_cmp(child_np->name, "usb3-port")) + else if (of_node_name_eq(child_np, "usb3-port")) phy = devm_phy_create(dev, child_np, &rockchip_usb3_phy_ops); else diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig index 20503562666c..f137e0107764 100644 --- a/drivers/phy/ti/Kconfig +++ b/drivers/phy/ti/Kconfig @@ -76,3 +76,13 @@ config TWL4030_USB family chips (including the TWL5030 and TPS659x0 devices). This transceiver supports high and full speed devices plus, in host mode, low speed. + +config PHY_TI_GMII_SEL + tristate + default y if TI_CPSW=y + depends on TI_CPSW || COMPILE_TEST + select GENERIC_PHY + default m + help + This driver supports configuring of the TI CPSW Port mode depending on + the Ethernet PHY connected to the CPSW Port. diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile index 9f361756eaf2..bea8f25a137a 100644 --- a/drivers/phy/ti/Makefile +++ b/drivers/phy/ti/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o +obj-$(CONFIG_PHY_TI_GMII_SEL) += phy-gmii-sel.o diff --git a/drivers/phy/ti/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c index befb886ff121..d5f4fbc32b52 100644 --- a/drivers/phy/ti/phy-da8xx-usb.c +++ b/drivers/phy/ti/phy-da8xx-usb.c @@ -93,7 +93,8 @@ static int da8xx_usb20_phy_power_off(struct phy *phy) return 0; } -static int da8xx_usb20_phy_set_mode(struct phy *phy, enum phy_mode mode) +static int da8xx_usb20_phy_set_mode(struct phy *phy, + enum phy_mode mode, int submode) { struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy); u32 val; diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c new file mode 100644 index 000000000000..77fdaa551977 --- /dev/null +++ b/drivers/phy/ti/phy-gmii-sel.c @@ -0,0 +1,349 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Texas Instruments CPSW Port's PHY Interface Mode selection Driver + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on cpsw-phy-sel.c driver created by Mugunthan V N <mugunthanvnm@ti.com> + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/of_net.h> +#include <linux/phy.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> + +/* AM33xx SoC specific definitions for the CONTROL port */ +#define AM33XX_GMII_SEL_MODE_MII 0 +#define AM33XX_GMII_SEL_MODE_RMII 1 +#define AM33XX_GMII_SEL_MODE_RGMII 2 + +enum { + PHY_GMII_SEL_PORT_MODE, + PHY_GMII_SEL_RGMII_ID_MODE, + PHY_GMII_SEL_RMII_IO_CLK_EN, + PHY_GMII_SEL_LAST, +}; + +struct phy_gmii_sel_phy_priv { + struct phy_gmii_sel_priv *priv; + u32 id; + struct phy *if_phy; + int rmii_clock_external; + int phy_if_mode; + struct regmap_field *fields[PHY_GMII_SEL_LAST]; +}; + +struct phy_gmii_sel_soc_data { + u32 num_ports; + u32 features; + const struct reg_field (*regfields)[PHY_GMII_SEL_LAST]; +}; + +struct phy_gmii_sel_priv { + struct device *dev; + const struct phy_gmii_sel_soc_data *soc_data; + struct regmap *regmap; + struct phy_provider *phy_provider; + struct phy_gmii_sel_phy_priv *if_phys; +}; + +static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode) +{ + struct phy_gmii_sel_phy_priv *if_phy = phy_get_drvdata(phy); + const struct phy_gmii_sel_soc_data *soc_data = if_phy->priv->soc_data; + struct device *dev = if_phy->priv->dev; + struct regmap_field *regfield; + int ret, rgmii_id = 0; + u32 gmii_sel_mode = 0; + + if (mode != PHY_MODE_ETHERNET) + return -EINVAL; + + switch (submode) { + case PHY_INTERFACE_MODE_RMII: + gmii_sel_mode = AM33XX_GMII_SEL_MODE_RMII; + break; + + case PHY_INTERFACE_MODE_RGMII: + gmii_sel_mode = AM33XX_GMII_SEL_MODE_RGMII; + break; + + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + gmii_sel_mode = AM33XX_GMII_SEL_MODE_RGMII; + rgmii_id = 1; + break; + + case PHY_INTERFACE_MODE_MII: + mode = AM33XX_GMII_SEL_MODE_MII; + break; + + default: + dev_warn(dev, + "port%u: unsupported mode: \"%s\". Defaulting to MII.\n", + if_phy->id, phy_modes(rgmii_id)); + return -EINVAL; + } + + if_phy->phy_if_mode = submode; + + dev_dbg(dev, "%s id:%u mode:%u rgmii_id:%d rmii_clk_ext:%d\n", + __func__, if_phy->id, mode, rgmii_id, + if_phy->rmii_clock_external); + + regfield = if_phy->fields[PHY_GMII_SEL_PORT_MODE]; + ret = regmap_field_write(regfield, gmii_sel_mode); + if (ret) { + dev_err(dev, "port%u: set mode fail %d", if_phy->id, ret); + return ret; + } + + if (soc_data->features & BIT(PHY_GMII_SEL_RGMII_ID_MODE) && + if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE]) { + regfield = if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE]; + ret = regmap_field_write(regfield, rgmii_id); + if (ret) + return ret; + } + + if (soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN) && + if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN]) { + regfield = if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN]; + ret = regmap_field_write(regfield, + if_phy->rmii_clock_external); + } + + return 0; +} + +static const +struct reg_field phy_gmii_sel_fields_am33xx[][PHY_GMII_SEL_LAST] = { + { + [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x650, 0, 1), + [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x650, 4, 4), + [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD(0x650, 6, 6), + }, + { + [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x650, 2, 3), + [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x650, 5, 5), + [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD(0x650, 7, 7), + }, +}; + +static const +struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am33xx = { + .num_ports = 2, + .features = BIT(PHY_GMII_SEL_RGMII_ID_MODE) | + BIT(PHY_GMII_SEL_RMII_IO_CLK_EN), + .regfields = phy_gmii_sel_fields_am33xx, +}; + +static const +struct reg_field phy_gmii_sel_fields_dra7[][PHY_GMII_SEL_LAST] = { + { + [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 0, 1), + [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD((~0), 0, 0), + [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD((~0), 0, 0), + }, + { + [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 4, 5), + [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD((~0), 0, 0), + [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD((~0), 0, 0), + }, +}; + +static const +struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dra7 = { + .num_ports = 2, + .regfields = phy_gmii_sel_fields_dra7, +}; + +static const +struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dm814 = { + .num_ports = 2, + .features = BIT(PHY_GMII_SEL_RGMII_ID_MODE), + .regfields = phy_gmii_sel_fields_am33xx, +}; + +static const struct of_device_id phy_gmii_sel_id_table[] = { + { + .compatible = "ti,am3352-phy-gmii-sel", + .data = &phy_gmii_sel_soc_am33xx, + }, + { + .compatible = "ti,dra7xx-phy-gmii-sel", + .data = &phy_gmii_sel_soc_dra7, + }, + { + .compatible = "ti,am43xx-phy-gmii-sel", + .data = &phy_gmii_sel_soc_am33xx, + }, + { + .compatible = "ti,dm814-phy-gmii-sel", + .data = &phy_gmii_sel_soc_dm814, + }, + {} +}; +MODULE_DEVICE_TABLE(of, phy_gmii_sel_id_table); + +static const struct phy_ops phy_gmii_sel_ops = { + .set_mode = phy_gmii_sel_mode, + .owner = THIS_MODULE, +}; + +static struct phy *phy_gmii_sel_of_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct phy_gmii_sel_priv *priv = dev_get_drvdata(dev); + int phy_id = args->args[0]; + + if (args->args_count < 1) + return ERR_PTR(-EINVAL); + if (priv->soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN) && + args->args_count < 2) + return ERR_PTR(-EINVAL); + if (!priv || !priv->if_phys) + return ERR_PTR(-ENODEV); + if (phy_id > priv->soc_data->num_ports) + return ERR_PTR(-EINVAL); + if (phy_id != priv->if_phys[phy_id - 1].id) + return ERR_PTR(-EINVAL); + + phy_id--; + if (priv->soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN)) + priv->if_phys[phy_id].rmii_clock_external = args->args[1]; + dev_dbg(dev, "%s id:%u ext:%d\n", __func__, + priv->if_phys[phy_id].id, args->args[1]); + + return priv->if_phys[phy_id].if_phy; +} + +static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv) +{ + const struct phy_gmii_sel_soc_data *soc_data = priv->soc_data; + struct device *dev = priv->dev; + struct phy_gmii_sel_phy_priv *if_phys; + int i, num_ports, ret; + + num_ports = priv->soc_data->num_ports; + + if_phys = devm_kcalloc(priv->dev, num_ports, + sizeof(*if_phys), GFP_KERNEL); + if (!if_phys) + return -ENOMEM; + dev_dbg(dev, "%s %d\n", __func__, num_ports); + + for (i = 0; i < num_ports; i++) { + const struct reg_field *field; + struct regmap_field *regfield; + + if_phys[i].id = i + 1; + if_phys[i].priv = priv; + + field = &soc_data->regfields[i][PHY_GMII_SEL_PORT_MODE]; + dev_dbg(dev, "%s field %x %d %d\n", __func__, + field->reg, field->msb, field->lsb); + + regfield = devm_regmap_field_alloc(dev, priv->regmap, *field); + if (IS_ERR(regfield)) + return PTR_ERR(regfield); + if_phys[i].fields[PHY_GMII_SEL_PORT_MODE] = regfield; + + field = &soc_data->regfields[i][PHY_GMII_SEL_RGMII_ID_MODE]; + if (field->reg != (~0)) { + regfield = devm_regmap_field_alloc(dev, + priv->regmap, + *field); + if (IS_ERR(regfield)) + return PTR_ERR(regfield); + if_phys[i].fields[PHY_GMII_SEL_RGMII_ID_MODE] = + regfield; + } + + field = &soc_data->regfields[i][PHY_GMII_SEL_RMII_IO_CLK_EN]; + if (field->reg != (~0)) { + regfield = devm_regmap_field_alloc(dev, + priv->regmap, + *field); + if (IS_ERR(regfield)) + return PTR_ERR(regfield); + if_phys[i].fields[PHY_GMII_SEL_RMII_IO_CLK_EN] = + regfield; + } + + if_phys[i].if_phy = devm_phy_create(dev, + priv->dev->of_node, + &phy_gmii_sel_ops); + if (IS_ERR(if_phys[i].if_phy)) { + ret = PTR_ERR(if_phys[i].if_phy); + dev_err(dev, "Failed to create phy%d %d\n", i, ret); + return ret; + } + phy_set_drvdata(if_phys[i].if_phy, &if_phys[i]); + } + + priv->if_phys = if_phys; + return 0; +} + +static int phy_gmii_sel_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + const struct of_device_id *of_id; + struct phy_gmii_sel_priv *priv; + int ret; + + of_id = of_match_node(phy_gmii_sel_id_table, pdev->dev.of_node); + if (!of_id) + return -EINVAL; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + priv->soc_data = of_id->data; + + priv->regmap = syscon_node_to_regmap(node->parent); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + dev_err(dev, "Failed to get syscon %d\n", ret); + return ret; + } + + ret = phy_gmii_sel_init_ports(priv); + if (ret) + return ret; + + dev_set_drvdata(&pdev->dev, priv); + + priv->phy_provider = + devm_of_phy_provider_register(dev, + phy_gmii_sel_of_xlate); + if (IS_ERR(priv->phy_provider)) { + ret = PTR_ERR(priv->phy_provider); + dev_err(dev, "Failed to create phy provider %d\n", ret); + return ret; + } + + return 0; +} + +static struct platform_driver phy_gmii_sel_driver = { + .probe = phy_gmii_sel_probe, + .driver = { + .name = "phy-gmii-sel", + .of_match_table = phy_gmii_sel_id_table, + }, +}; +module_platform_driver(phy_gmii_sel_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Grygorii Strashko <grygorii.strashko@ti.com>"); +MODULE_DESCRIPTION("TI CPSW Port's PHY Interface Mode selection Driver"); diff --git a/drivers/phy/ti/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c index b8ec39ac4dfc..329fb938099a 100644 --- a/drivers/phy/ti/phy-tusb1210.c +++ b/drivers/phy/ti/phy-tusb1210.c @@ -53,7 +53,7 @@ static int tusb1210_power_off(struct phy *phy) return 0; } -static int tusb1210_set_mode(struct phy *phy, enum phy_mode mode) +static int tusb1210_set_mode(struct phy *phy, enum phy_mode mode, int submode) { struct tusb1210 *tusb = phy_get_drvdata(phy); int ret; diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c index 616b8853a91f..02bc74608cf3 100644 --- a/drivers/platform/x86/intel_cht_int33fe.c +++ b/drivers/platform/x86/intel_cht_int33fe.c @@ -79,7 +79,7 @@ static const struct property_entry max17047_props[] = { }; static const struct property_entry fusb302_props[] = { - PROPERTY_ENTRY_STRING("fcs,extcon-name", "cht_wcove_pwrsrc"), + PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"), PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000), PROPERTY_ENTRY_U32("fcs,max-sink-microamp", 3000000), PROPERTY_ENTRY_U32("fcs,max-sink-microwatt", 36000000), diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 987fc5ba6321..70e6c956c23c 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -205,8 +205,4 @@ config USB_ULPI_BUS To compile this driver as a module, choose M here: the module will be called ulpi. -config USB_ROLE_SWITCH - tristate - select USB_COMMON - endif # USB_SUPPORT diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 09b37c0d075d..e81de9ca8729 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -14,6 +14,7 @@ #include <linux/usb/chipidea.h> #include <linux/usb/of.h> #include <linux/clk.h> +#include <linux/pinctrl/consumer.h> #include "ci.h" #include "ci_hdrc_imx.h" @@ -85,6 +86,9 @@ struct ci_hdrc_imx_data { bool supports_runtime_pm; bool override_phy_control; bool in_lpm; + struct pinctrl *pinctrl; + struct pinctrl_state *pinctrl_hsic_active; + struct regulator *hsic_pad_regulator; /* SoC before i.mx6 (except imx23/imx28) needs three clks */ bool need_three_clks; struct clk *clk_ipg; @@ -132,11 +136,21 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev) data->dev = &misc_pdev->dev; - if (of_find_property(np, "disable-over-current", NULL)) + /* + * Check the various over current related properties. If over current + * detection is disabled we're not interested in the polarity. + */ + if (of_find_property(np, "disable-over-current", NULL)) { data->disable_oc = 1; - - if (of_find_property(np, "over-current-active-high", NULL)) - data->oc_polarity = 1; + } else if (of_find_property(np, "over-current-active-high", NULL)) { + data->oc_pol_active_low = 0; + data->oc_pol_configured = 1; + } else if (of_find_property(np, "over-current-active-low", NULL)) { + data->oc_pol_active_low = 1; + data->oc_pol_configured = 1; + } else { + dev_warn(dev, "No over current polarity defined\n"); + } if (of_find_property(np, "external-vbus-divider", NULL)) data->evdo = 1; @@ -245,19 +259,49 @@ static void imx_disable_unprepare_clks(struct device *dev) } } +static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned int event) +{ + struct device *dev = ci->dev->parent; + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret = 0; + + switch (event) { + case CI_HDRC_IMX_HSIC_ACTIVE_EVENT: + ret = pinctrl_select_state(data->pinctrl, + data->pinctrl_hsic_active); + if (ret) + dev_err(dev, "hsic_active select failed, err=%d\n", + ret); + break; + case CI_HDRC_IMX_HSIC_SUSPEND_EVENT: + ret = imx_usbmisc_hsic_set_connect(data->usbmisc_data); + if (ret) + dev_err(dev, + "hsic_set_connect failed, err=%d\n", ret); + break; + default: + break; + } + + return ret; +} + static int ci_hdrc_imx_probe(struct platform_device *pdev) { struct ci_hdrc_imx_data *data; struct ci_hdrc_platform_data pdata = { .name = dev_name(&pdev->dev), .capoffset = DEF_CAPOFFSET, + .notify_event = ci_hdrc_imx_notify_event, }; int ret; const struct of_device_id *of_id; const struct ci_hdrc_imx_platform_flag *imx_platform_flag; struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct pinctrl_state *pinctrl_hsic_idle; - of_id = of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev); + of_id = of_match_device(ci_hdrc_imx_dt_ids, dev); if (!of_id) return -ENODEV; @@ -268,19 +312,73 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) return -ENOMEM; platform_set_drvdata(pdev, data); - data->usbmisc_data = usbmisc_get_init_data(&pdev->dev); + data->usbmisc_data = usbmisc_get_init_data(dev); if (IS_ERR(data->usbmisc_data)) return PTR_ERR(data->usbmisc_data); - ret = imx_get_clks(&pdev->dev); + if (of_usb_get_phy_mode(dev->of_node) == USBPHY_INTERFACE_MODE_HSIC) { + pdata.flags |= CI_HDRC_IMX_IS_HSIC; + data->usbmisc_data->hsic = 1; + data->pinctrl = devm_pinctrl_get(dev); + if (IS_ERR(data->pinctrl)) { + dev_err(dev, "pinctrl get failed, err=%ld\n", + PTR_ERR(data->pinctrl)); + return PTR_ERR(data->pinctrl); + } + + pinctrl_hsic_idle = pinctrl_lookup_state(data->pinctrl, "idle"); + if (IS_ERR(pinctrl_hsic_idle)) { + dev_err(dev, + "pinctrl_hsic_idle lookup failed, err=%ld\n", + PTR_ERR(pinctrl_hsic_idle)); + return PTR_ERR(pinctrl_hsic_idle); + } + + ret = pinctrl_select_state(data->pinctrl, pinctrl_hsic_idle); + if (ret) { + dev_err(dev, "hsic_idle select failed, err=%d\n", ret); + return ret; + } + + data->pinctrl_hsic_active = pinctrl_lookup_state(data->pinctrl, + "active"); + if (IS_ERR(data->pinctrl_hsic_active)) { + dev_err(dev, + "pinctrl_hsic_active lookup failed, err=%ld\n", + PTR_ERR(data->pinctrl_hsic_active)); + return PTR_ERR(data->pinctrl_hsic_active); + } + + data->hsic_pad_regulator = devm_regulator_get(dev, "hsic"); + if (PTR_ERR(data->hsic_pad_regulator) == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else if (PTR_ERR(data->hsic_pad_regulator) == -ENODEV) { + /* no pad regualator is needed */ + data->hsic_pad_regulator = NULL; + } else if (IS_ERR(data->hsic_pad_regulator)) { + dev_err(dev, "Get HSIC pad regulator error: %ld\n", + PTR_ERR(data->hsic_pad_regulator)); + return PTR_ERR(data->hsic_pad_regulator); + } + + if (data->hsic_pad_regulator) { + ret = regulator_enable(data->hsic_pad_regulator); + if (ret) { + dev_err(dev, + "Failed to enable HSIC pad regulator\n"); + return ret; + } + } + } + ret = imx_get_clks(dev); if (ret) - return ret; + goto disable_hsic_regulator; - ret = imx_prepare_enable_clks(&pdev->dev); + ret = imx_prepare_enable_clks(dev); if (ret) - return ret; + goto disable_hsic_regulator; - data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0); + data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0); if (IS_ERR(data->phy)) { ret = PTR_ERR(data->phy); /* Return -EINVAL if no usbphy is available */ @@ -305,40 +403,43 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) ret = imx_usbmisc_init(data->usbmisc_data); if (ret) { - dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n", ret); + dev_err(dev, "usbmisc init failed, ret=%d\n", ret); goto err_clk; } - data->ci_pdev = ci_hdrc_add_device(&pdev->dev, + data->ci_pdev = ci_hdrc_add_device(dev, pdev->resource, pdev->num_resources, &pdata); if (IS_ERR(data->ci_pdev)) { ret = PTR_ERR(data->ci_pdev); if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "ci_hdrc_add_device failed, err=%d\n", ret); + dev_err(dev, "ci_hdrc_add_device failed, err=%d\n", + ret); goto err_clk; } ret = imx_usbmisc_init_post(data->usbmisc_data); if (ret) { - dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n", ret); + dev_err(dev, "usbmisc post failed, ret=%d\n", ret); goto disable_device; } if (data->supports_runtime_pm) { - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); } - device_set_wakeup_capable(&pdev->dev, true); + device_set_wakeup_capable(dev, true); return 0; disable_device: ci_hdrc_remove_device(data->ci_pdev); err_clk: - imx_disable_unprepare_clks(&pdev->dev); + imx_disable_unprepare_clks(dev); +disable_hsic_regulator: + if (data->hsic_pad_regulator) + ret = regulator_disable(data->hsic_pad_regulator); return ret; } @@ -355,6 +456,8 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev) if (data->override_phy_control) usb_phy_shutdown(data->phy); imx_disable_unprepare_clks(&pdev->dev); + if (data->hsic_pad_regulator) + regulator_disable(data->hsic_pad_regulator); return 0; } @@ -367,9 +470,16 @@ static void ci_hdrc_imx_shutdown(struct platform_device *pdev) static int __maybe_unused imx_controller_suspend(struct device *dev) { struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret = 0; dev_dbg(dev, "at %s\n", __func__); + ret = imx_usbmisc_hsic_set_clk(data->usbmisc_data, false); + if (ret) { + dev_err(dev, "usbmisc hsic_set_clk failed, ret=%d\n", ret); + return ret; + } + imx_disable_unprepare_clks(dev); data->in_lpm = true; @@ -400,8 +510,16 @@ static int __maybe_unused imx_controller_resume(struct device *dev) goto clk_disable; } + ret = imx_usbmisc_hsic_set_clk(data->usbmisc_data, true); + if (ret) { + dev_err(dev, "usbmisc hsic_set_clk failed, ret=%d\n", ret); + goto hsic_set_clk_fail; + } + return 0; +hsic_set_clk_fail: + imx_usbmisc_set_wakeup(data->usbmisc_data, true); clk_disable: imx_disable_unprepare_clks(dev); return ret; diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h index 204275f47573..7cc53e2ce564 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.h +++ b/drivers/usb/chipidea/ci_hdrc_imx.h @@ -11,13 +11,22 @@ struct imx_usbmisc_data { int index; unsigned int disable_oc:1; /* over current detect disabled */ - unsigned int oc_polarity:1; /* over current polarity if oc enabled */ + + /* true if over-current polarity is active low */ + unsigned int oc_pol_active_low:1; + + /* true if dt specifies polarity */ + unsigned int oc_pol_configured:1; + unsigned int evdo:1; /* set external vbus divider option */ unsigned int ulpi:1; /* connected to an ULPI phy */ + unsigned int hsic:1; /* HSIC controlller */ }; -int imx_usbmisc_init(struct imx_usbmisc_data *); -int imx_usbmisc_init_post(struct imx_usbmisc_data *); -int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *, bool); +int imx_usbmisc_init(struct imx_usbmisc_data *data); +int imx_usbmisc_init_post(struct imx_usbmisc_data *data); +int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled); +int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data); +int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on); #endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */ diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index d858a82c4f44..b45ceb91c735 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -170,6 +170,11 @@ static int host_start(struct ci_hdrc *ci) otg->host = &hcd->self; hcd->self.otg_port = 1; } + + if (ci->platdata->notify_event && + (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC)) + ci->platdata->notify_event + (ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT); } return ret; @@ -215,9 +220,85 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci) host_stop(ci); } +/* The below code is based on tegra ehci driver */ +static int ci_ehci_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 __iomem *status_reg; + u32 temp; + unsigned long flags; + int retval = 0; + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + + status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; + + spin_lock_irqsave(&ehci->lock, flags); + + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { + retval = -EPIPE; + goto done; + } + + temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E); + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + + /* + * If a transaction is in progress, there may be a delay in + * suspending the port. Poll until the port is suspended. + */ + if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, + PORT_SUSPEND, 5000)) + ehci_err(ehci, "timeout waiting for SUSPEND\n"); + + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, + CI_HDRC_IMX_HSIC_SUSPEND_EVENT); + + temp = ehci_readl(ehci, status_reg); + temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); + ehci_writel(ehci, temp, status_reg); + } + + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); + goto done; + } + + /* + * After resume has finished, it needs do some post resume + * operation for some SoCs. + */ + else if (typeReq == ClearPortFeature && + wValue == USB_PORT_FEAT_C_SUSPEND) { + /* Make sure the resume has finished, it should be finished */ + if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 25000)) + ehci_err(ehci, "timeout waiting for resume\n"); + } + + spin_unlock_irqrestore(&ehci->lock, flags); + + /* Handle the hub control events here */ + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +done: + spin_unlock_irqrestore(&ehci->lock, flags); + return retval; +} static int ci_ehci_bus_suspend(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); int port; u32 tmp; @@ -249,6 +330,16 @@ static int ci_ehci_bus_suspend(struct usb_hcd *hcd) * It needs a short delay between set RS bit and PHCD. */ usleep_range(150, 200); + /* + * Need to clear WKCN and WKOC for imx HSIC, + * otherwise, there will be wakeup event. + */ + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { + tmp = ehci_readl(ehci, reg); + tmp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); + ehci_writel(ehci, tmp, reg); + } + break; } } @@ -281,4 +372,5 @@ void ci_hdrc_host_driver_init(void) ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); orig_bus_suspend = ci_ehci_hc_driver.bus_suspend; ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend; + ci_ehci_hc_driver.hub_control = ci_ehci_hub_control; } diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index def80ff547e4..097ffbca0bd9 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -64,10 +64,22 @@ #define MX6_BM_OVER_CUR_DIS BIT(7) #define MX6_BM_OVER_CUR_POLARITY BIT(8) #define MX6_BM_WAKEUP_ENABLE BIT(10) +#define MX6_BM_UTMI_ON_CLOCK BIT(13) #define MX6_BM_ID_WAKEUP BIT(16) #define MX6_BM_VBUS_WAKEUP BIT(17) #define MX6SX_BM_DPDM_WAKEUP_EN BIT(29) #define MX6_BM_WAKEUP_INTR BIT(31) + +#define MX6_USB_HSIC_CTRL_OFFSET 0x10 +/* Send resume signal without 480Mhz PHY clock */ +#define MX6SX_BM_HSIC_AUTO_RESUME BIT(23) +/* set before portsc.suspendM = 1 */ +#define MX6_BM_HSIC_DEV_CONN BIT(21) +/* HSIC enable */ +#define MX6_BM_HSIC_EN BIT(12) +/* Force HSIC module 480M clock on, even when in Host is in suspend mode */ +#define MX6_BM_HSIC_CLK_ON BIT(11) + #define MX6_USB_OTG1_PHY_CTRL 0x18 /* For imx6dql, it is host-only controller, for later imx6, it is otg's */ #define MX6_USB_OTG2_PHY_CTRL 0x1c @@ -94,6 +106,10 @@ struct usbmisc_ops { int (*post)(struct imx_usbmisc_data *data); /* It's called when we need to enable/disable usb wakeup */ int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled); + /* It's called before setting portsc.suspendM */ + int (*hsic_set_connect)(struct imx_usbmisc_data *data); + /* It's called during suspend/resume */ + int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled); }; struct imx_usbmisc { @@ -120,6 +136,14 @@ static int usbmisc_imx25_init(struct imx_usbmisc_data *data) val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT); val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT); + + /* + * If the polarity is not configured assume active high for + * historical reasons. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + val &= ~MX25_OTG_OCPOL_BIT; + writel(val, usbmisc->base); break; case 1: @@ -129,6 +153,13 @@ static int usbmisc_imx25_init(struct imx_usbmisc_data *data) val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT); + /* + * If the polarity is not configured assume active high for + * historical reasons. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + val &= ~MX25_H1_OCPOL_BIT; + writel(val, usbmisc->base); break; @@ -340,11 +371,17 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) reg = readl(usbmisc->base + data->index * 4); if (data->disable_oc) { reg |= MX6_BM_OVER_CUR_DIS; - } else if (data->oc_polarity == 1) { - /* High active */ - reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY); } else { - reg &= ~(MX6_BM_OVER_CUR_DIS); + reg &= ~MX6_BM_OVER_CUR_DIS; + + /* + * If the polarity is not configured keep it as setup by the + * bootloader. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + reg |= MX6_BM_OVER_CUR_POLARITY; + else if (data->oc_pol_configured) + reg &= ~MX6_BM_OVER_CUR_POLARITY; } writel(reg, usbmisc->base + data->index * 4); @@ -353,6 +390,18 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base + data->index * 4); + /* For HSIC controller */ + if (data->hsic) { + reg = readl(usbmisc->base + data->index * 4); + writel(reg | MX6_BM_UTMI_ON_CLOCK, + usbmisc->base + data->index * 4); + reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + + (data->index - 2) * 4); + reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; + writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + + (data->index - 2) * 4); + } + spin_unlock_irqrestore(&usbmisc->lock, flags); usbmisc_imx6q_set_wakeup(data, false); @@ -360,6 +409,79 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) return 0; } +static int usbmisc_imx6_hsic_get_reg_offset(struct imx_usbmisc_data *data) +{ + int offset, ret = 0; + + if (data->index == 2 || data->index == 3) { + offset = (data->index - 2) * 4; + } else if (data->index == 0) { + /* + * For SoCs like i.MX7D and later, each USB controller has + * its own non-core register region. For SoCs before i.MX7D, + * the first two USB controllers are non-HSIC controllers. + */ + offset = 0; + } else { + dev_err(data->dev, "index is error for usbmisc\n"); + ret = -EINVAL; + } + + return ret ? ret : offset; +} + +static int usbmisc_imx6_hsic_set_connect(struct imx_usbmisc_data *data) +{ + unsigned long flags; + u32 val; + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + int offset; + + spin_lock_irqsave(&usbmisc->lock, flags); + offset = usbmisc_imx6_hsic_get_reg_offset(data); + if (offset < 0) { + spin_unlock_irqrestore(&usbmisc->lock, flags); + return offset; + } + + val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + if (!(val & MX6_BM_HSIC_DEV_CONN)) + writel(val | MX6_BM_HSIC_DEV_CONN, + usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return 0; +} + +static int usbmisc_imx6_hsic_set_clk(struct imx_usbmisc_data *data, bool on) +{ + unsigned long flags; + u32 val; + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + int offset; + + spin_lock_irqsave(&usbmisc->lock, flags); + offset = usbmisc_imx6_hsic_get_reg_offset(data); + if (offset < 0) { + spin_unlock_irqrestore(&usbmisc->lock, flags); + return offset; + } + + val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; + if (on) + val |= MX6_BM_HSIC_CLK_ON; + else + val &= ~MX6_BM_HSIC_CLK_ON; + + writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return 0; +} + + static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data) { void __iomem *reg = NULL; @@ -385,6 +507,13 @@ static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data) spin_unlock_irqrestore(&usbmisc->lock, flags); } + /* For HSIC controller */ + if (data->hsic) { + val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); + val |= MX6SX_BM_HSIC_AUTO_RESUME; + writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); + } + return 0; } @@ -444,9 +573,17 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data) reg = readl(usbmisc->base); if (data->disable_oc) { reg |= MX6_BM_OVER_CUR_DIS; - } else if (data->oc_polarity == 1) { - /* High active */ - reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY); + } else { + reg &= ~MX6_BM_OVER_CUR_DIS; + + /* + * If the polarity is not configured keep it as setup by the + * bootloader. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + reg |= MX6_BM_OVER_CUR_POLARITY; + else if (data->oc_pol_configured) + reg &= ~MX6_BM_OVER_CUR_POLARITY; } writel(reg, usbmisc->base); @@ -454,6 +591,7 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data) reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK; writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID, usbmisc->base + MX7D_USBNC_USB_CTRL2); + spin_unlock_irqrestore(&usbmisc->lock, flags); usbmisc_imx7d_set_wakeup(data, false); @@ -481,6 +619,8 @@ static const struct usbmisc_ops imx53_usbmisc_ops = { static const struct usbmisc_ops imx6q_usbmisc_ops = { .set_wakeup = usbmisc_imx6q_set_wakeup, .init = usbmisc_imx6q_init, + .hsic_set_connect = usbmisc_imx6_hsic_set_connect, + .hsic_set_clk = usbmisc_imx6_hsic_set_clk, }; static const struct usbmisc_ops vf610_usbmisc_ops = { @@ -490,6 +630,8 @@ static const struct usbmisc_ops vf610_usbmisc_ops = { static const struct usbmisc_ops imx6sx_usbmisc_ops = { .set_wakeup = usbmisc_imx6q_set_wakeup, .init = usbmisc_imx6sx_init, + .hsic_set_connect = usbmisc_imx6_hsic_set_connect, + .hsic_set_clk = usbmisc_imx6_hsic_set_clk, }; static const struct usbmisc_ops imx7d_usbmisc_ops = { @@ -546,6 +688,33 @@ int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled) } EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup); +int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); + if (!usbmisc->ops->hsic_set_connect || !data->hsic) + return 0; + return usbmisc->ops->hsic_set_connect(data); +} +EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_connect); + +int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on) +{ + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); + if (!usbmisc->ops->hsic_set_clk || !data->hsic) + return 0; + return usbmisc->ops->hsic_set_clk(data, on); +} +EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_clk); static const struct of_device_id usbmisc_imx_dt_ids[] = { { .compatible = "fsl,imx25-usbmisc", diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 1b68fed464cb..ed8c62b2d9d1 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -581,6 +581,13 @@ static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty) if (retval) goto error_init_termios; + /* + * Suppress initial echoing for some devices which might send data + * immediately after acm driver has been installed. + */ + if (acm->quirks & DISABLE_ECHO) + tty->termios.c_lflag &= ~ECHO; + tty->driver_data = acm; return 0; @@ -1657,6 +1664,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0e8d, 0x2000), /* MediaTek Inc Preloader */ + .driver_info = DISABLE_ECHO, /* DISABLE ECHO in termios flag */ + }, { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index ca06b20d7af9..515aad0847ee 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -140,3 +140,4 @@ struct acm { #define QUIRK_CONTROL_LINE_STATE BIT(6) #define CLEAR_HALT_CONDITIONS BIT(7) #define SEND_ZERO_PACKET BIT(8) +#define DISABLE_ECHO BIT(9) diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile index fb4d5ef4165c..0a7c45e85481 100644 --- a/drivers/usb/common/Makefile +++ b/drivers/usb/common/Makefile @@ -9,4 +9,3 @@ usb-common-$(CONFIG_USB_LED_TRIG) += led.o obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o obj-$(CONFIG_USB_ULPI_BUS) += ulpi.o -obj-$(CONFIG_USB_ROLE_SWITCH) += roles.o diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 487025d31d44..015b126ce455 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1074,8 +1074,6 @@ static int register_root_hub(struct usb_hcd *hcd) usb_dev->devnum = devnum; usb_dev->bus->devnum_next = devnum + 1; - memset (&usb_dev->bus->devmap.devicemap, 0, - sizeof usb_dev->bus->devmap.devicemap); set_bit (devnum, usb_dev->bus->devmap.devicemap); usb_set_device_state(usb_dev, USB_STATE_ADDRESS); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f76b2e0aba9d..1d1e61e980f3 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1112,6 +1112,16 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_PORT_FEAT_ENABLE); } + /* + * Add debounce if USB3 link is in polling/link training state. + * Link will automatically transition to Enabled state after + * link training completes. + */ + if (hub_is_superspeed(hdev) && + ((portstatus & USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_POLLING)) + need_debounce_delay = true; + /* Clear status-change flags; we'll debounce later */ if (portchange & USB_PORT_STAT_C_CONNECTION) { need_debounce_delay = true; diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 2d6d2c8244de..68ad75a7460d 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -262,7 +262,7 @@ static void dwc2_gadget_wkup_alert_handler(struct dwc2_hsotg *hsotg) if (gintsts2 & GINTSTS2_WKUP_ALERT_INT) { dev_dbg(hsotg->dev, "%s: Wkup_Alert_Int\n", __func__); dwc2_clear_bit(hsotg, GINTSTS2, GINTSTS2_WKUP_ALERT_INT); - dwc2_set_bit(hsotg, DCFG, DCTL_RMTWKUPSIG); + dwc2_set_bit(hsotg, DCTL, DCTL_RMTWKUPSIG); } } @@ -3165,8 +3165,6 @@ static void kill_all_requests(struct dwc2_hsotg *hsotg, dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index); } -static int dwc2_hsotg_ep_disable(struct usb_ep *ep); - /** * dwc2_hsotg_disconnect - disconnect service * @hsotg: The device state. @@ -3188,9 +3186,11 @@ void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg) /* all endpoints should be shutdown */ for (ep = 0; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + kill_all_requests(hsotg, hsotg->eps_in[ep], + -ESHUTDOWN); if (hsotg->eps_out[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + kill_all_requests(hsotg, hsotg->eps_out[ep], + -ESHUTDOWN); } call_gadget(hsotg, disconnect); @@ -3234,6 +3234,7 @@ static void dwc2_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic) GINTSTS_PTXFEMP | \ GINTSTS_RXFLVL) +static int dwc2_hsotg_ep_disable(struct usb_ep *ep); /** * dwc2_hsotg_core_init - issue softreset to the core * @hsotg: The device state @@ -4069,10 +4070,8 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) struct dwc2_hsotg *hsotg = hs_ep->parent; int dir_in = hs_ep->dir_in; int index = hs_ep->index; - unsigned long flags; u32 epctrl_reg; u32 ctrl; - int locked; dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep); @@ -4088,10 +4087,6 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); - locked = spin_is_locked(&hsotg->lock); - if (!locked) - spin_lock_irqsave(&hsotg->lock, flags); - ctrl = dwc2_readl(hsotg, epctrl_reg); if (ctrl & DXEPCTL_EPENA) @@ -4114,12 +4109,22 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) hs_ep->fifo_index = 0; hs_ep->fifo_size = 0; - if (!locked) - spin_unlock_irqrestore(&hsotg->lock, flags); - return 0; } +static int dwc2_hsotg_ep_disable_lock(struct usb_ep *ep) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + unsigned long flags; + int ret; + + spin_lock_irqsave(&hsotg->lock, flags); + ret = dwc2_hsotg_ep_disable(ep); + spin_unlock_irqrestore(&hsotg->lock, flags); + return ret; +} + /** * on_list - check request is on the given endpoint * @ep: The endpoint to check. @@ -4267,7 +4272,7 @@ static int dwc2_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value) static const struct usb_ep_ops dwc2_hsotg_ep_ops = { .enable = dwc2_hsotg_ep_enable, - .disable = dwc2_hsotg_ep_disable, + .disable = dwc2_hsotg_ep_disable_lock, .alloc_request = dwc2_hsotg_ep_alloc_request, .free_request = dwc2_hsotg_ep_free_request, .queue = dwc2_hsotg_ep_queue_lock, @@ -4407,9 +4412,9 @@ static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget) /* all endpoints should be shutdown */ for (ep = 1; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep); if (hsotg->eps_out[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep); } spin_lock_irqsave(&hsotg->lock, flags); @@ -4857,9 +4862,9 @@ int dwc2_hsotg_suspend(struct dwc2_hsotg *hsotg) for (ep = 0; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep); if (hsotg->eps_out[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep); } } @@ -5026,6 +5031,7 @@ void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg) val |= hsotg->params.lpm_clock_gating ? GLPMCFG_ENBLSLPM : 0; val |= hsotg->params.hird_threshold << GLPMCFG_HIRD_THRES_SHIFT; val |= hsotg->params.besl ? GLPMCFG_ENBESL : 0; + val |= GLPMCFG_LPM_ACCEPT_CTRL_ISOC; dwc2_writel(hsotg, val, GLPMCFG); dev_dbg(hsotg->dev, "GLPMCFG=0x%08x\n", dwc2_readl(hsotg, GLPMCFG)); diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index 3f9bccc95add..c089ffa1f0a8 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -366,7 +366,7 @@ struct dwc2_qh { u32 desc_list_sz; u32 *n_bytes; struct timer_list unreserve_timer; - struct timer_list wait_timer; + struct hrtimer wait_timer; struct dwc2_tt *dwc_tt; int ttport; unsigned tt_buffer_dirty:1; diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index 40839591d2ec..ea3aa640c15c 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -59,7 +59,7 @@ #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5)) /* If we get a NAK, wait this long before retrying */ -#define DWC2_RETRY_WAIT_DELAY (msecs_to_jiffies(1)) +#define DWC2_RETRY_WAIT_DELAY 1*1E6L /** * dwc2_periodic_channel_available() - Checks that a channel is available for a @@ -1464,10 +1464,12 @@ static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg, * qh back to the "inactive" list, then queues transactions. * * @t: Pointer to wait_timer in a qh. + * + * Return: HRTIMER_NORESTART to not automatically restart this timer. */ -static void dwc2_wait_timer_fn(struct timer_list *t) +static enum hrtimer_restart dwc2_wait_timer_fn(struct hrtimer *t) { - struct dwc2_qh *qh = from_timer(qh, t, wait_timer); + struct dwc2_qh *qh = container_of(t, struct dwc2_qh, wait_timer); struct dwc2_hsotg *hsotg = qh->hsotg; unsigned long flags; @@ -1491,6 +1493,7 @@ static void dwc2_wait_timer_fn(struct timer_list *t) } spin_unlock_irqrestore(&hsotg->lock, flags); + return HRTIMER_NORESTART; } /** @@ -1521,7 +1524,8 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, /* Initialize QH */ qh->hsotg = hsotg; timer_setup(&qh->unreserve_timer, dwc2_unreserve_timer_fn, 0); - timer_setup(&qh->wait_timer, dwc2_wait_timer_fn, 0); + hrtimer_init(&qh->wait_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + qh->wait_timer.function = &dwc2_wait_timer_fn; qh->ep_type = ep_type; qh->ep_is_in = ep_is_in; @@ -1690,7 +1694,7 @@ void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) * won't do anything anyway, but we want it to finish before we free * memory. */ - del_timer_sync(&qh->wait_timer); + hrtimer_cancel(&qh->wait_timer); dwc2_host_put_tt_info(hsotg, qh->dwc_tt); @@ -1716,6 +1720,7 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { int status; u32 intr_mask; + ktime_t delay; if (dbg_qh(qh)) dev_vdbg(hsotg->dev, "%s()\n", __func__); @@ -1734,8 +1739,8 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) list_add_tail(&qh->qh_list_entry, &hsotg->non_periodic_sched_waiting); qh->wait_timer_cancel = false; - mod_timer(&qh->wait_timer, - jiffies + DWC2_RETRY_WAIT_DELAY + 1); + delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY); + hrtimer_start(&qh->wait_timer, delay, HRTIMER_MODE_REL); } else { list_add_tail(&qh->qh_list_entry, &hsotg->non_periodic_sched_inactive); diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index 2b1ea441b7d4..98af924a9a5c 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -333,6 +333,8 @@ #define GLPMCFG_SNDLPM BIT(24) #define GLPMCFG_RETRY_CNT_MASK (0x7 << 21) #define GLPMCFG_RETRY_CNT_SHIFT 21 +#define GLPMCFG_LPM_ACCEPT_CTRL_CONTROL BIT(21) +#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC BIT(22) #define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17) #define GLPMCFG_LPM_CHNL_INDX_SHIFT 17 #define GLPMCFG_L1RESUMEOK BIT(16) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 7c1b6938f212..24ff5f21cb25 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -71,6 +71,13 @@ static void dwc2_set_his_params(struct dwc2_hsotg *hsotg) p->power_down = false; } +static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->power_down = 0; +} + static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) { struct dwc2_core_params *p = &hsotg->params; @@ -111,6 +118,7 @@ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg) p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 << GAHBCFG_HBSTLEN_SHIFT; + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; } static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg) @@ -151,7 +159,8 @@ const struct of_device_id dwc2_of_match_table[] = { { .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params }, { .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params }, { .compatible = "snps,dwc2" }, - { .compatible = "samsung,s3c6400-hsotg" }, + { .compatible = "samsung,s3c6400-hsotg", + .data = dwc2_set_s3c6400_params }, { .compatible = "amlogic,meson8-usb", .data = dwc2_set_amlogic_params }, { .compatible = "amlogic,meson8b-usb", diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 2f2048aa5fde..a1b126f90261 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -80,11 +80,12 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) mode = USB_DR_MODE_PERIPHERAL; /* - * dwc_usb31 does not support OTG mode. If the controller - * supports DRD but the dr_mode is not specified or set to OTG, - * then set the mode to peripheral. + * DWC_usb31 and DWC_usb3 v3.30a and higher do not support OTG + * mode. If the controller supports DRD but the dr_mode is not + * specified or set to OTG, then set the mode to peripheral. */ - if (mode == USB_DR_MODE_OTG && dwc3_is_usb31(dwc)) + if (mode == USB_DR_MODE_OTG && + dwc->revision >= DWC3_REVISION_330A) mode = USB_DR_MODE_PERIPHERAL; } @@ -661,6 +662,8 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_enblslpm_quirk) reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + else + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM; if (dwc->dis_u2_freeclk_exists_quirk) reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; @@ -702,6 +705,7 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc) /* Detected DWC_usb31 IP */ dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER); dwc->revision |= DWC3_REVISION_IS_DWC31; + dwc->version_type = dwc3_readl(dwc->regs, DWC3_VER_TYPE); } else { return false; } @@ -1244,8 +1248,12 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,is-utmi-l1-suspend"); device_property_read_u8(dev, "snps,hird-threshold", &hird_threshold); + dwc->dis_start_transfer_quirk = device_property_read_bool(dev, + "snps,dis-start-transfer-quirk"); dwc->usb3_lpm_capable = device_property_read_bool(dev, "snps,usb3_lpm_capable"); + dwc->usb2_lpm_disable = device_property_read_bool(dev, + "snps,usb2-lpm-disable"); device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd", &rx_thr_num_pkt_prd); device_property_read_u8(dev, "snps,rx-max-burst-prd", @@ -1482,7 +1490,8 @@ static int dwc3_probe(struct platform_device *pdev) ret = dwc3_core_init(dwc); if (ret) { - dev_err(dev, "failed to initialize core\n"); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to initialize core: %d\n", ret); goto err4; } diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 5bfb62533e0f..df876418cb78 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -37,6 +37,7 @@ #define DWC3_EP0_SETUP_SIZE 512 #define DWC3_ENDPOINTS_NUM 32 #define DWC3_XHCI_RESOURCES_NUM 2 +#define DWC3_ISOC_MAX_RETRIES 5 #define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */ #define DWC3_EVENT_BUFFERS_SIZE 4096 @@ -174,13 +175,19 @@ #define DWC3_GSBUSCFG0_INCRBRSTENA (1 << 0) /* undefined length enable */ #define DWC3_GSBUSCFG0_INCRBRST_MASK 0xff +/* Global Debug LSP MUX Select */ +#define DWC3_GDBGLSPMUX_ENDBC BIT(15) /* Host only */ +#define DWC3_GDBGLSPMUX_HOSTSELECT(n) ((n) & 0x3fff) +#define DWC3_GDBGLSPMUX_DEVSELECT(n) (((n) & 0xf) << 4) +#define DWC3_GDBGLSPMUX_EPSELECT(n) ((n) & 0xf) + /* Global Debug Queue/FIFO Space Available Register */ #define DWC3_GDBGFIFOSPACE_NUM(n) ((n) & 0x1f) #define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0) #define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff) -#define DWC3_TXFIFOQ 0 -#define DWC3_RXFIFOQ 1 +#define DWC3_TXFIFO 0 +#define DWC3_RXFIFO 1 #define DWC3_TXREQQ 2 #define DWC3_RXREQQ 3 #define DWC3_RXINFOQ 4 @@ -253,6 +260,9 @@ #define DWC3_GSTS_DEVICE_IP BIT(6) #define DWC3_GSTS_CSR_TIMEOUT BIT(5) #define DWC3_GSTS_BUS_ERR_ADDR_VLD BIT(4) +#define DWC3_GSTS_CURMOD(n) ((n) & 0x3) +#define DWC3_GSTS_CURMOD_DEVICE 0 +#define DWC3_GSTS_CURMOD_HOST 1 /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST BIT(31) @@ -321,6 +331,7 @@ #define DWC3_GHWPARAMS1_EN_PWROPT_HIB 2 #define DWC3_GHWPARAMS1_PWROPT(n) ((n) << 24) #define DWC3_GHWPARAMS1_PWROPT_MASK DWC3_GHWPARAMS1_PWROPT(3) +#define DWC3_GHWPARAMS1_ENDBC BIT(31) /* Global HWPARAMS3 Register */ #define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3) @@ -636,9 +647,9 @@ struct dwc3_event_buffer { /** * struct dwc3_ep - device side endpoint representation * @endpoint: usb endpoint + * @cancelled_list: list of cancelled requests for this endpoint * @pending_list: list of pending requests for this endpoint * @started_list: list of started requests on this endpoint - * @wait_end_transfer: wait_queue_head_t for waiting on End Transfer complete * @lock: spinlock for endpoint request queue traversal * @regs: pointer to first endpoint register * @trb_pool: array of transaction buffers @@ -656,14 +667,17 @@ struct dwc3_event_buffer { * @name: a human readable name e.g. ep1out-bulk * @direction: true for TX, false for RX * @stream_capable: true when streams are enabled + * @combo_num: the test combination BIT[15:14] of the frame number to test + * isochronous START TRANSFER command failure workaround + * @start_cmd_status: the status of testing START TRANSFER command with + * combo_num = 'b00 */ struct dwc3_ep { struct usb_ep endpoint; + struct list_head cancelled_list; struct list_head pending_list; struct list_head started_list; - wait_queue_head_t wait_end_transfer; - spinlock_t lock; void __iomem *regs; @@ -705,6 +719,10 @@ struct dwc3_ep { unsigned direction:1; unsigned stream_capable:1; + + /* For isochronous START TRANSFER workaround only */ + u8 combo_num; + int start_cmd_status; }; enum dwc3_phy { @@ -766,6 +784,7 @@ enum dwc3_link_state { #define DWC3_TRB_CTRL_ISP_IMI BIT(10) #define DWC3_TRB_CTRL_IOC BIT(11) #define DWC3_TRB_CTRL_SID_SOFN(n) (((n) & 0xffff) << 14) +#define DWC3_TRB_CTRL_GET_SID_SOFN(n) (((n) & (0xffff << 14)) >> 14) #define DWC3_TRBCTL_TYPE(n) ((n) & (0x3f << 4)) #define DWC3_TRBCTL_NORMAL DWC3_TRB_CTRL_TRBCTL(1) @@ -847,11 +866,12 @@ struct dwc3_hwparams { * @epnum: endpoint number to which this request refers * @trb: pointer to struct dwc3_trb * @trb_dma: DMA address of @trb - * @unaligned: true for OUT endpoints with length not divisible by maxp + * @num_trbs: number of TRBs used by this request + * @needs_extra_trb: true when request needs one extra TRB (either due to ZLP + * or unaligned OUT) * @direction: IN or OUT direction flag * @mapped: true when request has been dma-mapped * @started: request is started - * @zero: wants a ZLP */ struct dwc3_request { struct usb_request request; @@ -867,11 +887,12 @@ struct dwc3_request { struct dwc3_trb *trb; dma_addr_t trb_dma; - unsigned unaligned:1; + unsigned num_trbs; + + unsigned needs_extra_trb:1; unsigned direction:1; unsigned mapped:1; unsigned started:1; - unsigned zero:1; }; /* @@ -918,6 +939,7 @@ struct dwc3_scratchpad_array { * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) * @revision: revision register contents + * @version_type: VERSIONTYPE register contents, a sub release of a revision * @dr_mode: requested mode of operation * @current_dr_role: current role of operation when in dual-role mode * @desired_dr_role: desired role of operation when in dual-role mode @@ -945,6 +967,7 @@ struct dwc3_scratchpad_array { * @hwparams: copy of hwparams registers * @root: debugfs root folder pointer * @regset: debugfs pointer to regdump file + * @dbg_lsp_select: current debug lsp mux register selection * @test_mode: true when we're entering a USB test mode * @test_mode_nr: test feature selector * @lpm_nyet_threshold: LPM NYET response threshold @@ -970,7 +993,10 @@ struct dwc3_scratchpad_array { * @pullups_connected: true when Run/Stop bit is set * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @three_stage_setup: set if we perform a three phase setup + * @dis_start_transfer_quirk: set if start_transfer failure SW workaround is + * not needed for DWC_usb31 version 1.70a-ea06 and below * @usb3_lpm_capable: set if hadrware supports Link Power Management + * @usb2_lpm_disable: set to disable usb2 lpm * @disable_scramble_quirk: set if we enable the disable scramble quirk * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk @@ -1095,6 +1121,7 @@ struct dwc3 { #define DWC3_REVISION_290A 0x5533290a #define DWC3_REVISION_300A 0x5533300a #define DWC3_REVISION_310A 0x5533310a +#define DWC3_REVISION_330A 0x5533330a /* * NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really @@ -1103,6 +1130,17 @@ struct dwc3 { #define DWC3_REVISION_IS_DWC31 0x80000000 #define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_DWC31) #define DWC3_USB31_REVISION_120A (0x3132302a | DWC3_REVISION_IS_DWC31) +#define DWC3_USB31_REVISION_160A (0x3136302a | DWC3_REVISION_IS_DWC31) +#define DWC3_USB31_REVISION_170A (0x3137302a | DWC3_REVISION_IS_DWC31) + + u32 version_type; + +#define DWC31_VERSIONTYPE_EA01 0x65613031 +#define DWC31_VERSIONTYPE_EA02 0x65613032 +#define DWC31_VERSIONTYPE_EA03 0x65613033 +#define DWC31_VERSIONTYPE_EA04 0x65613034 +#define DWC31_VERSIONTYPE_EA05 0x65613035 +#define DWC31_VERSIONTYPE_EA06 0x65613036 enum dwc3_ep0_next ep0_next_event; enum dwc3_ep0_state ep0state; @@ -1121,6 +1159,8 @@ struct dwc3 { struct dentry *root; struct debugfs_regset32 *regset; + u32 dbg_lsp_select; + u8 test_mode; u8 test_mode_nr; u8 lpm_nyet_threshold; @@ -1145,7 +1185,9 @@ struct dwc3 { unsigned pullups_connected:1; unsigned setup_packet_pending:1; unsigned three_stage_setup:1; + unsigned dis_start_transfer_quirk:1; unsigned usb3_lpm_capable:1; + unsigned usb2_lpm_disable:1; unsigned disable_scramble_quirk:1; unsigned u2exit_lfps_quirk:1; diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index c66d216dcc30..4f75ab3505b7 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -117,6 +117,35 @@ dwc3_gadget_link_string(enum dwc3_link_state link_state) } /** + * dwc3_gadget_hs_link_string - returns highspeed and below link name + * @link_state: link state code + */ +static inline const char * +dwc3_gadget_hs_link_string(enum dwc3_link_state link_state) +{ + switch (link_state) { + case DWC3_LINK_STATE_U0: + return "On"; + case DWC3_LINK_STATE_U2: + return "Sleep"; + case DWC3_LINK_STATE_U3: + return "Suspend"; + case DWC3_LINK_STATE_SS_DIS: + return "Disconnected"; + case DWC3_LINK_STATE_RX_DET: + return "Early Suspend"; + case DWC3_LINK_STATE_RECOV: + return "Recovery"; + case DWC3_LINK_STATE_RESET: + return "Reset"; + case DWC3_LINK_STATE_RESUME: + return "Resume"; + default: + return "UNKNOWN link state\n"; + } +} + +/** * dwc3_trb_type_string - returns TRB type as a string * @type: the type of the TRB */ diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index df8e73ec3342..1c792710348f 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -25,6 +25,8 @@ #include "io.h" #include "debug.h" +#define DWC3_LSP_MUX_UNSELECTED 0xfffff + #define dump_register(nm) \ { \ .name = __stringify(nm), \ @@ -82,10 +84,6 @@ static const struct debugfs_reg32 dwc3_regs[] = { dump_register(GDBGFIFOSPACE), dump_register(GDBGLTSSM), dump_register(GDBGBMU), - dump_register(GDBGLSPMUX), - dump_register(GDBGLSP), - dump_register(GDBGEPINFO0), - dump_register(GDBGEPINFO1), dump_register(GPRTBIMAP_HS0), dump_register(GPRTBIMAP_HS1), dump_register(GPRTBIMAP_FS0), @@ -279,6 +277,114 @@ static const struct debugfs_reg32 dwc3_regs[] = { dump_register(OSTS), }; +static void dwc3_host_lsp(struct seq_file *s) +{ + struct dwc3 *dwc = s->private; + bool dbc_enabled; + u32 sel; + u32 reg; + u32 val; + + dbc_enabled = !!(dwc->hwparams.hwparams1 & DWC3_GHWPARAMS1_ENDBC); + + sel = dwc->dbg_lsp_select; + if (sel == DWC3_LSP_MUX_UNSELECTED) { + seq_puts(s, "Write LSP selection to print for host\n"); + return; + } + + reg = DWC3_GDBGLSPMUX_HOSTSELECT(sel); + + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + val = dwc3_readl(dwc->regs, DWC3_GDBGLSP); + seq_printf(s, "GDBGLSP[%d] = 0x%08x\n", sel, val); + + if (dbc_enabled && sel < 256) { + reg |= DWC3_GDBGLSPMUX_ENDBC; + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + val = dwc3_readl(dwc->regs, DWC3_GDBGLSP); + seq_printf(s, "GDBGLSP_DBC[%d] = 0x%08x\n", sel, val); + } +} + +static void dwc3_gadget_lsp(struct seq_file *s) +{ + struct dwc3 *dwc = s->private; + int i; + u32 reg; + + for (i = 0; i < 16; i++) { + reg = DWC3_GDBGLSPMUX_DEVSELECT(i); + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + reg = dwc3_readl(dwc->regs, DWC3_GDBGLSP); + seq_printf(s, "GDBGLSP[%d] = 0x%08x\n", i, reg); + } +} + +static int dwc3_lsp_show(struct seq_file *s, void *unused) +{ + struct dwc3 *dwc = s->private; + unsigned int current_mode; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&dwc->lock, flags); + reg = dwc3_readl(dwc->regs, DWC3_GSTS); + current_mode = DWC3_GSTS_CURMOD(reg); + + switch (current_mode) { + case DWC3_GSTS_CURMOD_HOST: + dwc3_host_lsp(s); + break; + case DWC3_GSTS_CURMOD_DEVICE: + dwc3_gadget_lsp(s); + break; + default: + seq_puts(s, "Mode is unknown, no LSP register printed\n"); + break; + } + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +static int dwc3_lsp_open(struct inode *inode, struct file *file) +{ + return single_open(file, dwc3_lsp_show, inode->i_private); +} + +static ssize_t dwc3_lsp_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct dwc3 *dwc = s->private; + unsigned long flags; + char buf[32] = { 0 }; + u32 sel; + int ret; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + ret = kstrtouint(buf, 0, &sel); + if (ret) + return ret; + + spin_lock_irqsave(&dwc->lock, flags); + dwc->dbg_lsp_select = sel; + spin_unlock_irqrestore(&dwc->lock, flags); + + return count; +} + +static const struct file_operations dwc3_lsp_fops = { + .open = dwc3_lsp_open, + .write = dwc3_lsp_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int dwc3_mode_show(struct seq_file *s, void *unused) { struct dwc3 *dwc = s->private; @@ -433,13 +539,24 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused) unsigned long flags; enum dwc3_link_state state; u32 reg; + u8 speed; spin_lock_irqsave(&dwc->lock, flags); + reg = dwc3_readl(dwc->regs, DWC3_GSTS); + if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) { + seq_puts(s, "Not available\n"); + spin_unlock_irqrestore(&dwc->lock, flags); + return 0; + } + reg = dwc3_readl(dwc->regs, DWC3_DSTS); state = DWC3_DSTS_USBLNKST(reg); - spin_unlock_irqrestore(&dwc->lock, flags); + speed = reg & DWC3_DSTS_CONNECTSPD; - seq_printf(s, "%s\n", dwc3_gadget_link_string(state)); + seq_printf(s, "%s\n", (speed >= DWC3_DSTS_SUPERSPEED) ? + dwc3_gadget_link_string(state) : + dwc3_gadget_hs_link_string(state)); + spin_unlock_irqrestore(&dwc->lock, flags); return 0; } @@ -457,6 +574,8 @@ static ssize_t dwc3_link_state_write(struct file *file, unsigned long flags; enum dwc3_link_state state = 0; char buf[32]; + u32 reg; + u8 speed; if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; @@ -477,6 +596,21 @@ static ssize_t dwc3_link_state_write(struct file *file, return -EINVAL; spin_lock_irqsave(&dwc->lock, flags); + reg = dwc3_readl(dwc->regs, DWC3_GSTS); + if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) { + spin_unlock_irqrestore(&dwc->lock, flags); + return -EINVAL; + } + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + speed = reg & DWC3_DSTS_CONNECTSPD; + + if (speed < DWC3_DSTS_SUPERSPEED && + state != DWC3_LINK_STATE_RECOV) { + spin_unlock_irqrestore(&dwc->lock, flags); + return -EINVAL; + } + dwc3_gadget_set_link_state(dwc, state); spin_unlock_irqrestore(&dwc->lock, flags); @@ -496,7 +630,7 @@ struct dwc3_ep_file_map { const struct file_operations *const fops; }; -static int dwc3_tx_fifo_queue_show(struct seq_file *s, void *unused) +static int dwc3_tx_fifo_size_show(struct seq_file *s, void *unused) { struct dwc3_ep *dep = s->private; struct dwc3 *dwc = dep->dwc; @@ -504,14 +638,18 @@ static int dwc3_tx_fifo_queue_show(struct seq_file *s, void *unused) u32 val; spin_lock_irqsave(&dwc->lock, flags); - val = dwc3_core_fifo_space(dep, DWC3_TXFIFOQ); + val = dwc3_core_fifo_space(dep, DWC3_TXFIFO); + + /* Convert to bytes */ + val *= DWC3_MDWIDTH(dwc->hwparams.hwparams0); + val >>= 3; seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); return 0; } -static int dwc3_rx_fifo_queue_show(struct seq_file *s, void *unused) +static int dwc3_rx_fifo_size_show(struct seq_file *s, void *unused) { struct dwc3_ep *dep = s->private; struct dwc3 *dwc = dep->dwc; @@ -519,7 +657,11 @@ static int dwc3_rx_fifo_queue_show(struct seq_file *s, void *unused) u32 val; spin_lock_irqsave(&dwc->lock, flags); - val = dwc3_core_fifo_space(dep, DWC3_RXFIFOQ); + val = dwc3_core_fifo_space(dep, DWC3_RXFIFO); + + /* Convert to bytes */ + val *= DWC3_MDWIDTH(dwc->hwparams.hwparams0); + val >>= 3; seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); @@ -675,8 +817,32 @@ out: return 0; } -DEFINE_SHOW_ATTRIBUTE(dwc3_tx_fifo_queue); -DEFINE_SHOW_ATTRIBUTE(dwc3_rx_fifo_queue); +static int dwc3_ep_info_register_show(struct seq_file *s, void *unused) +{ + struct dwc3_ep *dep = s->private; + struct dwc3 *dwc = dep->dwc; + unsigned long flags; + u64 ep_info; + u32 lower_32_bits; + u32 upper_32_bits; + u32 reg; + + spin_lock_irqsave(&dwc->lock, flags); + reg = DWC3_GDBGLSPMUX_EPSELECT(dep->number); + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + + lower_32_bits = dwc3_readl(dwc->regs, DWC3_GDBGEPINFO0); + upper_32_bits = dwc3_readl(dwc->regs, DWC3_GDBGEPINFO1); + + ep_info = ((u64)upper_32_bits << 32) | lower_32_bits; + seq_printf(s, "0x%016llx\n", ep_info); + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(dwc3_tx_fifo_size); +DEFINE_SHOW_ATTRIBUTE(dwc3_rx_fifo_size); DEFINE_SHOW_ATTRIBUTE(dwc3_tx_request_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_rx_request_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_rx_info_queue); @@ -684,10 +850,11 @@ DEFINE_SHOW_ATTRIBUTE(dwc3_descriptor_fetch_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_event_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_transfer_type); DEFINE_SHOW_ATTRIBUTE(dwc3_trb_ring); +DEFINE_SHOW_ATTRIBUTE(dwc3_ep_info_register); static const struct dwc3_ep_file_map dwc3_ep_file_map[] = { - { "tx_fifo_queue", &dwc3_tx_fifo_queue_fops, }, - { "rx_fifo_queue", &dwc3_rx_fifo_queue_fops, }, + { "tx_fifo_size", &dwc3_tx_fifo_size_fops, }, + { "rx_fifo_size", &dwc3_rx_fifo_size_fops, }, { "tx_request_queue", &dwc3_tx_request_queue_fops, }, { "rx_request_queue", &dwc3_rx_request_queue_fops, }, { "rx_info_queue", &dwc3_rx_info_queue_fops, }, @@ -695,6 +862,7 @@ static const struct dwc3_ep_file_map dwc3_ep_file_map[] = { { "event_queue", &dwc3_event_queue_fops, }, { "transfer_type", &dwc3_transfer_type_fops, }, { "trb_ring", &dwc3_trb_ring_fops, }, + { "GDBGEPINFO", &dwc3_ep_info_register_fops, }, }; static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep, @@ -742,6 +910,8 @@ void dwc3_debugfs_init(struct dwc3 *dwc) if (!dwc->regset) return; + dwc->dbg_lsp_select = DWC3_LSP_MUX_UNSELECTED; + dwc->regset->regs = dwc3_regs; dwc->regset->nregs = ARRAY_SIZE(dwc3_regs); dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START; @@ -751,6 +921,9 @@ void dwc3_debugfs_init(struct dwc3 *dwc) debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset); + debugfs_create_file("lsp_dump", S_IRUGO | S_IWUSR, root, dwc, + &dwc3_lsp_fops); + if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) { debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, dwc, &dwc3_mode_fops); diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 218371f985ca..869725d15c74 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -10,6 +10,7 @@ #include <linux/extcon.h> #include <linux/of_graph.h> #include <linux/platform_device.h> +#include <linux/property.h> #include "debug.h" #include "core.h" @@ -445,9 +446,19 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) struct device *dev = dwc->dev; struct device_node *np_phy, *np_conn; struct extcon_dev *edev; + const char *name; - if (of_property_read_bool(dev->of_node, "extcon")) - return extcon_get_edev_by_phandle(dwc->dev, 0); + if (device_property_read_bool(dev, "extcon")) + return extcon_get_edev_by_phandle(dev, 0); + + /* + * Device tree platforms should get extcon via phandle. + * On ACPI platforms, we get the name from a device property. + * This device property is for kernel internal use only and + * is expected to be set by the glue code. + */ + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) + return extcon_get_extcon_dev(name); np_phy = of_parse_phandle(dev->of_node, "phys", 0); np_conn = of_graph_get_remote_node(np_phy, -1, -1); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 842795856bf4..fdc6e4e403e8 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -170,20 +170,20 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) * put the gpio descriptors again here because the phy driver * might want to grab them, too. */ - gpio = devm_gpiod_get_optional(&pdev->dev, "cs", - GPIOD_OUT_LOW); + gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW); if (IS_ERR(gpio)) return PTR_ERR(gpio); gpiod_set_value_cansleep(gpio, 1); + gpiod_put(gpio); - gpio = devm_gpiod_get_optional(&pdev->dev, "reset", - GPIOD_OUT_LOW); + gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(gpio)) return PTR_ERR(gpio); if (gpio) { gpiod_set_value_cansleep(gpio, 1); + gpiod_put(gpio); usleep_range(10000, 11000); } } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 9f92ee03dde7..07bd31bb2f8a 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -27,7 +27,7 @@ #include "gadget.h" #include "io.h" -#define DWC3_ALIGN_FRAME(d) (((d)->frame_number + (d)->interval) \ +#define DWC3_ALIGN_FRAME(d, n) (((d)->frame_number + ((d)->interval * (n))) \ & ~((d)->interval - 1)) /** @@ -647,8 +647,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) reg |= DWC3_DALEPENA_EP(dep->number); dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); - init_waitqueue_head(&dep->wait_end_transfer); - if (usb_endpoint_xfer_control(desc)) goto out; @@ -672,7 +670,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) * Issue StartTransfer here with no-op TRB so we can always rely on No * Response Update Transfer command. */ - if (usb_endpoint_xfer_bulk(desc) || + if ((usb_endpoint_xfer_bulk(desc) && !dep->stream_capable) || usb_endpoint_xfer_int(desc)) { struct dwc3_gadget_ep_cmd_params params; struct dwc3_trb *trb; @@ -919,8 +917,6 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, struct usb_gadget *gadget = &dwc->gadget; enum usb_device_speed speed = gadget->speed; - dwc3_ep_inc_enq(dep); - trb->size = DWC3_TRB_SIZE_LENGTH(length); trb->bpl = lower_32_bits(dma); trb->bph = upper_32_bits(dma); @@ -990,16 +986,20 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, usb_endpoint_type(dep->endpoint.desc)); } - /* always enable Continue on Short Packet */ + /* + * Enable Continue on Short Packet + * when endpoint is not a stream capable + */ if (usb_endpoint_dir_out(dep->endpoint.desc)) { - trb->ctrl |= DWC3_TRB_CTRL_CSP; + if (!dep->stream_capable) + trb->ctrl |= DWC3_TRB_CTRL_CSP; if (short_not_ok) trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; } if ((!no_interrupt && !chain) || - (dwc3_calc_trbs_left(dep) == 0)) + (dwc3_calc_trbs_left(dep) == 1)) trb->ctrl |= DWC3_TRB_CTRL_IOC; if (chain) @@ -1010,6 +1010,8 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, trb->ctrl |= DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_enq(dep); + trace_dwc3_prepare_trb(dep, trb); } @@ -1046,6 +1048,8 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, req->trb_dma = dwc3_trb_dma_offset(dep, trb); } + req->num_trbs++; + __dwc3_prepare_one_trb(dep, trb, dma, length, chain, node, stream_id, short_not_ok, no_interrupt); } @@ -1073,13 +1077,14 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; - req->unaligned = true; + req->needs_extra_trb = true; /* prepare normal TRB */ dwc3_prepare_one_trb(dep, req, true, i); /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem, false, 1, req->request.stream_id, @@ -1117,13 +1122,14 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; - req->unaligned = true; + req->needs_extra_trb = true; /* prepare normal TRB */ dwc3_prepare_one_trb(dep, req, true, 0); /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem, false, 1, req->request.stream_id, req->request.short_not_ok, @@ -1133,13 +1139,14 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; - req->zero = true; + req->needs_extra_trb = true; /* prepare normal TRB */ dwc3_prepare_one_trb(dep, req, true, 0); /* Now prepare one extra TRB to handle ZLP */ trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0, false, 1, req->request.stream_id, req->request.short_not_ok, @@ -1232,6 +1239,9 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) params.param1 = lower_32_bits(req->trb_dma); cmd = DWC3_DEPCMD_STARTTRANSFER; + if (dep->stream_capable) + cmd |= DWC3_DEPCMD_PARAM(req->request.stream_id); + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) cmd |= DWC3_DEPCMD_PARAM(dep->frame_number); } else { @@ -1263,17 +1273,151 @@ static int __dwc3_gadget_get_frame(struct dwc3 *dwc) return DWC3_DSTS_SOFFN(reg); } -static void __dwc3_gadget_start_isoc(struct dwc3_ep *dep) +/** + * dwc3_gadget_start_isoc_quirk - workaround invalid frame number + * @dep: isoc endpoint + * + * This function tests for the correct combination of BIT[15:14] from the 16-bit + * microframe number reported by the XferNotReady event for the future frame + * number to start the isoc transfer. + * + * In DWC_usb31 version 1.70a-ea06 and prior, for highspeed and fullspeed + * isochronous IN, BIT[15:14] of the 16-bit microframe number reported by the + * XferNotReady event are invalid. The driver uses this number to schedule the + * isochronous transfer and passes it to the START TRANSFER command. Because + * this number is invalid, the command may fail. If BIT[15:14] matches the + * internal 16-bit microframe, the START TRANSFER command will pass and the + * transfer will start at the scheduled time, if it is off by 1, the command + * will still pass, but the transfer will start 2 seconds in the future. For all + * other conditions, the START TRANSFER command will fail with bus-expiry. + * + * In order to workaround this issue, we can test for the correct combination of + * BIT[15:14] by sending START TRANSFER commands with different values of + * BIT[15:14]: 'b00, 'b01, 'b10, and 'b11. Each combination is 2^14 uframe apart + * (or 2 seconds). 4 seconds into the future will result in a bus-expiry status. + * As the result, within the 4 possible combinations for BIT[15:14], there will + * be 2 successful and 2 failure START COMMAND status. One of the 2 successful + * command status will result in a 2-second delay start. The smaller BIT[15:14] + * value is the correct combination. + * + * Since there are only 4 outcomes and the results are ordered, we can simply + * test 2 START TRANSFER commands with BIT[15:14] combinations 'b00 and 'b01 to + * deduce the smaller successful combination. + * + * Let test0 = test status for combination 'b00 and test1 = test status for 'b01 + * of BIT[15:14]. The correct combination is as follow: + * + * if test0 fails and test1 passes, BIT[15:14] is 'b01 + * if test0 fails and test1 fails, BIT[15:14] is 'b10 + * if test0 passes and test1 fails, BIT[15:14] is 'b11 + * if test0 passes and test1 passes, BIT[15:14] is 'b00 + * + * Synopsys STAR 9001202023: Wrong microframe number for isochronous IN + * endpoints. + */ +static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep) +{ + int cmd_status = 0; + bool test0; + bool test1; + + while (dep->combo_num < 2) { + struct dwc3_gadget_ep_cmd_params params; + u32 test_frame_number; + u32 cmd; + + /* + * Check if we can start isoc transfer on the next interval or + * 4 uframes in the future with BIT[15:14] as dep->combo_num + */ + test_frame_number = dep->frame_number & 0x3fff; + test_frame_number |= dep->combo_num << 14; + test_frame_number += max_t(u32, 4, dep->interval); + + params.param0 = upper_32_bits(dep->dwc->bounce_addr); + params.param1 = lower_32_bits(dep->dwc->bounce_addr); + + cmd = DWC3_DEPCMD_STARTTRANSFER; + cmd |= DWC3_DEPCMD_PARAM(test_frame_number); + cmd_status = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + + /* Redo if some other failure beside bus-expiry is received */ + if (cmd_status && cmd_status != -EAGAIN) { + dep->start_cmd_status = 0; + dep->combo_num = 0; + return 0; + } + + /* Store the first test status */ + if (dep->combo_num == 0) + dep->start_cmd_status = cmd_status; + + dep->combo_num++; + + /* + * End the transfer if the START_TRANSFER command is successful + * to wait for the next XferNotReady to test the command again + */ + if (cmd_status == 0) { + dwc3_stop_active_transfer(dep, true); + return 0; + } + } + + /* test0 and test1 are both completed at this point */ + test0 = (dep->start_cmd_status == 0); + test1 = (cmd_status == 0); + + if (!test0 && test1) + dep->combo_num = 1; + else if (!test0 && !test1) + dep->combo_num = 2; + else if (test0 && !test1) + dep->combo_num = 3; + else if (test0 && test1) + dep->combo_num = 0; + + dep->frame_number &= 0x3fff; + dep->frame_number |= dep->combo_num << 14; + dep->frame_number += max_t(u32, 4, dep->interval); + + /* Reinitialize test variables */ + dep->start_cmd_status = 0; + dep->combo_num = 0; + + return __dwc3_gadget_kick_transfer(dep); +} + +static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep) { + struct dwc3 *dwc = dep->dwc; + int ret; + int i; + if (list_empty(&dep->pending_list)) { - dev_info(dep->dwc->dev, "%s: ran out of requests\n", - dep->name); dep->flags |= DWC3_EP_PENDING_REQUEST; - return; + return -EAGAIN; + } + + if (!dwc->dis_start_transfer_quirk && dwc3_is_usb31(dwc) && + (dwc->revision <= DWC3_USB31_REVISION_160A || + (dwc->revision == DWC3_USB31_REVISION_170A && + dwc->version_type >= DWC31_VERSIONTYPE_EA01 && + dwc->version_type <= DWC31_VERSIONTYPE_EA06))) { + + if (dwc->gadget.speed <= USB_SPEED_HIGH && dep->direction) + return dwc3_gadget_start_isoc_quirk(dep); } - dep->frame_number = DWC3_ALIGN_FRAME(dep); - __dwc3_gadget_kick_transfer(dep); + for (i = 0; i < DWC3_ISOC_MAX_RETRIES; i++) { + dep->frame_number = DWC3_ALIGN_FRAME(dep, i + 1); + + ret = __dwc3_gadget_kick_transfer(dep); + if (ret != -EAGAIN) + break; + } + + return ret; } static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) @@ -1314,8 +1458,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) if ((dep->flags & DWC3_EP_PENDING_REQUEST)) { if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) { - __dwc3_gadget_start_isoc(dep); - return 0; + return __dwc3_gadget_start_isoc(dep); } } } @@ -1341,6 +1484,40 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, return ret; } +static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *req) +{ + int i; + + /* + * If request was already started, this means we had to + * stop the transfer. With that we also need to ignore + * all TRBs used by the request, however TRBs can only + * be modified after completion of END_TRANSFER + * command. So what we do here is that we wait for + * END_TRANSFER completion and only after that, we jump + * over TRBs by clearing HWO and incrementing dequeue + * pointer. + */ + for (i = 0; i < req->num_trbs; i++) { + struct dwc3_trb *trb; + + trb = req->trb + i; + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + } +} + +static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep) +{ + struct dwc3_request *req; + struct dwc3_request *tmp; + + list_for_each_entry_safe(req, tmp, &dep->cancelled_list, list) { + dwc3_gadget_ep_skip_trbs(dep, req); + dwc3_gadget_giveback(dep, req, -ECONNRESET); + } +} + static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request) { @@ -1371,68 +1548,11 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, /* wait until it is processed */ dwc3_stop_active_transfer(dep, true); - /* - * If request was already started, this means we had to - * stop the transfer. With that we also need to ignore - * all TRBs used by the request, however TRBs can only - * be modified after completion of END_TRANSFER - * command. So what we do here is that we wait for - * END_TRANSFER completion and only after that, we jump - * over TRBs by clearing HWO and incrementing dequeue - * pointer. - * - * Note that we have 2 possible types of transfers here: - * - * i) Linear buffer request - * ii) SG-list based request - * - * SG-list based requests will have r->num_pending_sgs - * set to a valid number (> 0). Linear requests, - * normally use a single TRB. - * - * For each of these two cases, if r->unaligned flag is - * set, one extra TRB has been used to align transfer - * size to wMaxPacketSize. - * - * All of these cases need to be taken into - * consideration so we don't mess up our TRB ring - * pointers. - */ - wait_event_lock_irq(dep->wait_end_transfer, - !(dep->flags & DWC3_EP_END_TRANSFER_PENDING), - dwc->lock); - if (!r->trb) goto out0; - if (r->num_pending_sgs) { - struct dwc3_trb *trb; - int i = 0; - - for (i = 0; i < r->num_pending_sgs; i++) { - trb = r->trb + i; - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - } - - if (r->unaligned || r->zero) { - trb = r->trb + r->num_pending_sgs + 1; - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - } - } else { - struct dwc3_trb *trb = r->trb; - - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - - if (r->unaligned || r->zero) { - trb = r->trb + 1; - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - } - } - goto out1; + dwc3_gadget_move_cancelled_request(req); + goto out0; } dev_err(dwc->dev, "request %pK was not queued to %s\n", request, ep->name); @@ -1440,9 +1560,6 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, goto out0; } -out1: - /* giveback the request */ - dwc3_gadget_giveback(dep, req, -ECONNRESET); out0: @@ -1934,8 +2051,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g) { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; - int epnum; - u32 tmo_eps = 0; spin_lock_irqsave(&dwc->lock, flags); @@ -1944,36 +2059,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g) __dwc3_gadget_stop(dwc); - for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) { - struct dwc3_ep *dep = dwc->eps[epnum]; - int ret; - - if (!dep) - continue; - - if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) - continue; - - ret = wait_event_interruptible_lock_irq_timeout(dep->wait_end_transfer, - !(dep->flags & DWC3_EP_END_TRANSFER_PENDING), - dwc->lock, msecs_to_jiffies(5)); - - if (ret <= 0) { - /* Timed out or interrupted! There's nothing much - * we can do so we just log here and print which - * endpoints timed out at the end. - */ - tmo_eps |= 1 << epnum; - dep->flags &= DWC3_EP_END_TRANSFER_PENDING; - } - } - - if (tmo_eps) { - dev_err(dwc->dev, - "end transfer timed out on endpoints 0x%x [bitmap]\n", - tmo_eps); - } - out: dwc->gadget_driver = NULL; spin_unlock_irqrestore(&dwc->lock, flags); @@ -2148,6 +2233,8 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) dep->direction = direction; dep->regs = dwc->regs + DWC3_DEP_BASE(epnum); dwc->eps[epnum] = dep; + dep->combo_num = 0; + dep->start_cmd_status = 0; snprintf(dep->name, sizeof(dep->name), "ep%u%s", num, direction ? "in" : "out"); @@ -2176,6 +2263,7 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) INIT_LIST_HEAD(&dep->pending_list); INIT_LIST_HEAD(&dep->started_list); + INIT_LIST_HEAD(&dep->cancelled_list); return 0; } @@ -2235,6 +2323,7 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, dwc3_ep_inc_deq(dep); trace_dwc3_complete_trb(dep, trb); + req->num_trbs--; /* * If we're in the middle of series of chained TRBs and we @@ -2250,11 +2339,25 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, trb->ctrl &= ~DWC3_TRB_CTRL_HWO; /* + * For isochronous transfers, the first TRB in a service interval must + * have the Isoc-First type. Track and report its interval frame number. + */ + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + (trb->ctrl & DWC3_TRBCTL_ISOCHRONOUS_FIRST)) { + unsigned int frame_number; + + frame_number = DWC3_TRB_CTRL_GET_SID_SOFN(trb->ctrl); + frame_number &= ~(dep->interval - 1); + req->request.frame_number = frame_number; + } + + /* * If we're dealing with unaligned size OUT transfer, we will be left * with one TRB pending in the ring. We need to manually clear HWO bit * from that TRB. */ - if ((req->zero || req->unaligned) && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) { + + if (req->needs_extra_trb && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) { trb->ctrl &= ~DWC3_TRB_CTRL_HWO; return 1; } @@ -2331,11 +2434,10 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status); - if (req->unaligned || req->zero) { + if (req->needs_extra_trb) { ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status); - req->unaligned = false; - req->zero = false; + req->needs_extra_trb = false; } req->request.actual = req->request.length - req->remaining; @@ -2430,7 +2532,7 @@ static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep, const struct dwc3_event_depevt *event) { dwc3_gadget_endpoint_frame_from_event(dep, event); - __dwc3_gadget_start_isoc(dep); + (void) __dwc3_gadget_start_isoc(dep); } static void dwc3_endpoint_interrupt(struct dwc3 *dwc, @@ -2468,7 +2570,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, if (cmd == DWC3_DEPCMD_ENDTRANSFER) { dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; - wake_up(&dep->wait_end_transfer); + dwc3_gadget_ep_cleanup_cancelled_requests(dep); } break; case DWC3_DEPEVT_STREAMEVT: diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 2aacd1afd9ff..023a473648eb 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -79,6 +79,21 @@ static inline void dwc3_gadget_move_started_request(struct dwc3_request *req) list_move_tail(&req->list, &dep->started_list); } +/** + * dwc3_gadget_move_cancelled_request - move @req to the cancelled_list + * @req: the request to be moved + * + * Caller should take care of locking. This function will move @req from its + * current list to the endpoint's cancelled_list. + */ +static inline void dwc3_gadget_move_cancelled_request(struct dwc3_request *req) +{ + struct dwc3_ep *dep = req->dep; + + req->started = false; + list_move_tail(&req->list, &dep->cancelled_list); +} + void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, int status); diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 1a3878a3be78..f55947294f7c 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -46,7 +46,7 @@ out: int dwc3_host_init(struct dwc3 *dwc) { - struct property_entry props[3]; + struct property_entry props[4]; struct platform_device *xhci; int ret, irq; struct resource *res; @@ -93,6 +93,9 @@ int dwc3_host_init(struct dwc3 *dwc) if (dwc->usb3_lpm_capable) props[prop_idx++].name = "usb3-lpm-capable"; + if (dwc->usb2_lpm_disable) + props[prop_idx++].name = "usb2-lpm-disable"; + /** * WORKAROUND: dwc3 revisions <=3.00a have a limitation * where Port Disable command doesn't work. diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index f22714cce070..e97a00593dda 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -199,7 +199,7 @@ DECLARE_EVENT_CLASS(dwc3_log_gadget_ep_cmd, __entry->param2 = params->param2; __entry->cmd_status = cmd_status; ), - TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x --> status: %s", + TP_printk("%s: cmd '%s' [%x] params %08x %08x %08x --> status: %s", __get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd), __entry->cmd, __entry->param0, __entry->param1, __entry->param2, @@ -251,9 +251,11 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, s = "2x "; break; case 3: + default: s = "3x "; break; } + break; default: s = ""; } s; }), diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index d633c2abe5a4..ea0d531c63e2 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -631,28 +631,28 @@ static int ehci_reset_port(int port) if (!(portsc & PORT_RESET)) break; } - if (portsc & PORT_RESET) { - /* force reset to complete */ - loop = 100 * 1000; - writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), - &ehci_regs->port_status[port - 1]); - do { - udelay(1); - portsc = readl(&ehci_regs->port_status[port-1]); - } while ((portsc & PORT_RESET) && (--loop > 0)); - } + if (portsc & PORT_RESET) { + /* force reset to complete */ + loop = 100 * 1000; + writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), + &ehci_regs->port_status[port - 1]); + do { + udelay(1); + portsc = readl(&ehci_regs->port_status[port-1]); + } while ((portsc & PORT_RESET) && (--loop > 0)); + } - /* Device went away? */ - if (!(portsc & PORT_CONNECT)) - return -ENOTCONN; + /* Device went away? */ + if (!(portsc & PORT_CONNECT)) + return -ENOTCONN; - /* bomb out completely if something weird happened */ - if ((portsc & PORT_CSC)) - return -EINVAL; + /* bomb out completely if something weird happened */ + if ((portsc & PORT_CSC)) + return -EINVAL; - /* If we've finished resetting, then break out of the loop */ - if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) - return 0; + /* If we've finished resetting, then break out of the loop */ + if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) + return 0; return -EBUSY; } diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 31e8bf3578c8..1e5430438703 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -18,11 +18,15 @@ #include <linux/pagemap.h> #include <linux/export.h> #include <linux/hid.h> +#include <linux/mm.h> #include <linux/module.h> +#include <linux/scatterlist.h> #include <linux/sched/signal.h> #include <linux/uio.h> +#include <linux/vmalloc.h> #include <asm/unaligned.h> +#include <linux/usb/ccid.h> #include <linux/usb/composite.h> #include <linux/usb/functionfs.h> @@ -218,6 +222,8 @@ struct ffs_io_data { struct usb_ep *ep; struct usb_request *req; + struct sg_table sgt; + bool use_sg; struct ffs_data *ffs; }; @@ -749,6 +755,65 @@ static ssize_t ffs_copy_to_iter(void *data, int data_len, struct iov_iter *iter) return ret; } +/* + * allocate a virtually contiguous buffer and create a scatterlist describing it + * @sg_table - pointer to a place to be filled with sg_table contents + * @size - required buffer size + */ +static void *ffs_build_sg_list(struct sg_table *sgt, size_t sz) +{ + struct page **pages; + void *vaddr, *ptr; + unsigned int n_pages; + int i; + + vaddr = vmalloc(sz); + if (!vaddr) + return NULL; + + n_pages = PAGE_ALIGN(sz) >> PAGE_SHIFT; + pages = kvmalloc_array(n_pages, sizeof(struct page *), GFP_KERNEL); + if (!pages) { + vfree(vaddr); + + return NULL; + } + for (i = 0, ptr = vaddr; i < n_pages; ++i, ptr += PAGE_SIZE) + pages[i] = vmalloc_to_page(ptr); + + if (sg_alloc_table_from_pages(sgt, pages, n_pages, 0, sz, GFP_KERNEL)) { + kvfree(pages); + vfree(vaddr); + + return NULL; + } + kvfree(pages); + + return vaddr; +} + +static inline void *ffs_alloc_buffer(struct ffs_io_data *io_data, + size_t data_len) +{ + if (io_data->use_sg) + return ffs_build_sg_list(&io_data->sgt, data_len); + + return kmalloc(data_len, GFP_KERNEL); +} + +static inline void ffs_free_buffer(struct ffs_io_data *io_data) +{ + if (!io_data->buf) + return; + + if (io_data->use_sg) { + sg_free_table(&io_data->sgt); + vfree(io_data->buf); + } else { + kfree(io_data->buf); + } +} + static void ffs_user_copy_worker(struct work_struct *work) { struct ffs_io_data *io_data = container_of(work, struct ffs_io_data, @@ -776,7 +841,7 @@ static void ffs_user_copy_worker(struct work_struct *work) if (io_data->read) kfree(io_data->to_free); - kfree(io_data->buf); + ffs_free_buffer(io_data); kfree(io_data); } @@ -932,6 +997,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) * earlier */ gadget = epfile->ffs->gadget; + io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE; spin_lock_irq(&epfile->ffs->eps_lock); /* In the meantime, endpoint got disabled or changed. */ @@ -948,7 +1014,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) data_len = usb_ep_align_maybe(gadget, ep->ep, data_len); spin_unlock_irq(&epfile->ffs->eps_lock); - data = kmalloc(data_len, GFP_KERNEL); + data = ffs_alloc_buffer(io_data, data_len); if (unlikely(!data)) { ret = -ENOMEM; goto error_mutex; @@ -988,8 +1054,16 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) bool interrupted = false; req = ep->req; - req->buf = data; - req->length = data_len; + if (io_data->use_sg) { + req->buf = NULL; + req->sg = io_data->sgt.sgl; + req->num_sgs = io_data->sgt.nents; + } else { + req->buf = data; + } + req->length = data_len; + + io_data->buf = data; req->context = &done; req->complete = ffs_epfile_io_complete; @@ -1022,8 +1096,14 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) } else if (!(req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC))) { ret = -ENOMEM; } else { - req->buf = data; - req->length = data_len; + if (io_data->use_sg) { + req->buf = NULL; + req->sg = io_data->sgt.sgl; + req->num_sgs = io_data->sgt.nents; + } else { + req->buf = data; + } + req->length = data_len; io_data->buf = data; io_data->ep = ep->ep; @@ -1052,7 +1132,7 @@ error_lock: error_mutex: mutex_unlock(&epfile->mutex); error: - kfree(data); + ffs_free_buffer(io_data); return ret; } @@ -1926,7 +2006,7 @@ typedef int (*ffs_os_desc_callback)(enum ffs_os_desc_type entity, static int __must_check ffs_do_single_desc(char *data, unsigned len, ffs_entity_callback entity, - void *priv) + void *priv, int *current_class) { struct usb_descriptor_header *_ds = (void *)data; u8 length; @@ -1984,6 +2064,7 @@ static int __must_check ffs_do_single_desc(char *data, unsigned len, __entity(INTERFACE, ds->bInterfaceNumber); if (ds->iInterface) __entity(STRING, ds->iInterface); + *current_class = ds->bInterfaceClass; } break; @@ -1997,11 +2078,22 @@ static int __must_check ffs_do_single_desc(char *data, unsigned len, } break; - case HID_DT_HID: - pr_vdebug("hid descriptor\n"); - if (length != sizeof(struct hid_descriptor)) - goto inv_length; - break; + case USB_TYPE_CLASS | 0x01: + if (*current_class == USB_INTERFACE_CLASS_HID) { + pr_vdebug("hid descriptor\n"); + if (length != sizeof(struct hid_descriptor)) + goto inv_length; + break; + } else if (*current_class == USB_INTERFACE_CLASS_CCID) { + pr_vdebug("ccid descriptor\n"); + if (length != sizeof(struct ccid_descriptor)) + goto inv_length; + break; + } else { + pr_vdebug("unknown descriptor: %d for class %d\n", + _ds->bDescriptorType, *current_class); + return -EINVAL; + } case USB_DT_OTG: if (length != sizeof(struct usb_otg_descriptor)) @@ -2058,6 +2150,7 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len, { const unsigned _len = len; unsigned long num = 0; + int current_class = -1; ENTER(); @@ -2078,7 +2171,8 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len, if (!data) return _len - len; - ret = ffs_do_single_desc(data, len, entity, priv); + ret = ffs_do_single_desc(data, len, entity, priv, + ¤t_class); if (unlikely(ret < 0)) { pr_debug("%s returns %d\n", __func__, ret); return ret; diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c index f2497cb96abb..61e2c94cc0b0 100644 --- a/drivers/usb/gadget/function/uvc_queue.c +++ b/drivers/usb/gadget/function/uvc_queue.c @@ -102,7 +102,7 @@ static void uvc_buffer_queue(struct vb2_buffer *vb) spin_unlock_irqrestore(&queue->irqlock, flags); } -static struct vb2_ops uvc_queue_qops = { +static const struct vb2_ops uvc_queue_qops = { .queue_setup = uvc_queue_setup, .buf_prepare = uvc_buffer_prepare, .buf_queue = uvc_buffer_queue, diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c index f0233912bace..6b1b16b17d7d 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/dev.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c @@ -438,7 +438,7 @@ static int ast_vhub_udc_stop(struct usb_gadget *gadget) return 0; } -static struct usb_gadget_ops ast_vhub_udc_ops = { +static const struct usb_gadget_ops ast_vhub_udc_ops = { .get_frame = ast_vhub_udc_get_frame, .wakeup = ast_vhub_udc_wakeup, .pullup = ast_vhub_udc_pullup, diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c index afaea11ec771..55c8c8abeacd 100644 --- a/drivers/usb/gadget/udc/pch_udc.c +++ b/drivers/usb/gadget/udc/pch_udc.c @@ -1330,7 +1330,7 @@ static void pch_vbus_gpio_work_rise(struct work_struct *irq_work) } /** - * pch_vbus_gpio_irq() - IRQ handler for GPIO intrerrupt for changing VBUS + * pch_vbus_gpio_irq() - IRQ handler for GPIO interrupt for changing VBUS * @irq: Interrupt request number * @dev: Reference to the device structure * diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index cdffbd1e0316..6e34f9594159 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -358,6 +358,7 @@ struct renesas_usb3 { bool extcon_host; /* check id and set EXTCON_USB_HOST */ bool extcon_usb; /* check vbus and set EXTCON_USB */ bool forced_b_device; + bool start_to_connect; }; #define gadget_to_renesas_usb3(_gadget) \ @@ -476,7 +477,8 @@ static void usb3_init_axi_bridge(struct renesas_usb3 *usb3) static void usb3_init_epc_registers(struct renesas_usb3 *usb3) { usb3_write(usb3, ~0, USB3_USB_INT_STA_1); - usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); + if (!usb3->workaround_for_vbus) + usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); } static bool usb3_wakeup_usb2_phy(struct renesas_usb3 *usb3) @@ -700,8 +702,7 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev) usb3_set_mode_by_role_sw(usb3, host); usb3_vbus_out(usb3, a_dev); /* for A-Peripheral or forced B-device mode */ - if ((!host && a_dev) || - (usb3->workaround_for_vbus && usb3->forced_b_device)) + if ((!host && a_dev) || usb3->start_to_connect) usb3_connect(usb3); spin_unlock_irqrestore(&usb3->lock, flags); } @@ -2432,7 +2433,11 @@ static ssize_t renesas_usb3_b_device_write(struct file *file, if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; - if (!strncmp(buf, "1", 1)) + usb3->start_to_connect = false; + if (usb3->workaround_for_vbus && usb3->forced_b_device && + !strncmp(buf, "2", 1)) + usb3->start_to_connect = true; + else if (!strncmp(buf, "1", 1)) usb3->forced_b_device = true; else usb3->forced_b_device = false; @@ -2440,7 +2445,7 @@ static ssize_t renesas_usb3_b_device_write(struct file *file, if (usb3->workaround_for_vbus) usb3_disconnect(usb3); - /* Let this driver call usb3_connect() anyway */ + /* Let this driver call usb3_connect() if needed */ usb3_check_id(usb3); return count; diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index 8bf5ad7a59ad..af3e63316ace 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -119,7 +119,7 @@ static void dprintk(int level, const char *fmt, ...) } #endif -static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) +static int s3c2410_udc_debugfs_show(struct seq_file *m, void *p) { u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg; u32 ep_int_en_reg, usb_int_en_reg, ep0_csr; @@ -168,20 +168,7 @@ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) return 0; } - -static int s3c2410_udc_debugfs_fops_open(struct inode *inode, - struct file *file) -{ - return single_open(file, s3c2410_udc_debugfs_seq_show, NULL); -} - -static const struct file_operations s3c2410_udc_debugfs_fops = { - .open = s3c2410_udc_debugfs_fops_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; +DEFINE_SHOW_ATTRIBUTE(s3c2410_udc_debugfs); /* io macros */ diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 7e4c13346a1e..7d20296cbe9f 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -159,11 +159,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* get the PHY device */ phy = devm_usb_get_phy_by_phandle(dev, "phys", i); if (IS_ERR(phy)) { - /* Don't bail out if PHY is not absolutely necessary */ - if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) + ret = PTR_ERR(phy); + if (ret == -ENODEV) { /* no PHY */ + phy = NULL; continue; + } - ret = PTR_ERR(phy); if (ret != -EPROBE_DEFER) dev_err(dev, "Can't get PHY for port %d: %d\n", i, ret); diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index b21c386e6a46..28bf8bfb091e 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2159,25 +2159,15 @@ static int isp1362_show(struct seq_file *s, void *unused) return 0; } - -static int isp1362_open(struct inode *inode, struct file *file) -{ - return single_open(file, isp1362_show, inode); -} - -static const struct file_operations debug_ops = { - .open = isp1362_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(isp1362); /* expect just one isp1362_hcd per system */ static void create_debug_file(struct isp1362_hcd *isp1362_hcd) { isp1362_hcd->debug_file = debugfs_create_file("isp1362", S_IRUGO, usb_debug_root, - isp1362_hcd, &debug_ops); + isp1362_hcd, + &isp1362_fops); } static void remove_debug_file(struct isp1362_hcd *isp1362_hcd) diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c index b3da3f12e5b1..3965ac0341eb 100644 --- a/drivers/usb/host/ohci-mem.c +++ b/drivers/usb/host/ohci-mem.c @@ -57,14 +57,10 @@ static int ohci_mem_init (struct ohci_hcd *ohci) static void ohci_mem_cleanup (struct ohci_hcd *ohci) { - if (ohci->td_cache) { - dma_pool_destroy (ohci->td_cache); - ohci->td_cache = NULL; - } - if (ohci->ed_cache) { - dma_pool_destroy (ohci->ed_cache); - ohci->ed_cache = NULL; - } + dma_pool_destroy(ohci->td_cache); + ohci->td_cache = NULL; + dma_pool_destroy(ohci->ed_cache); + ohci->ed_cache = NULL; } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 984892dd72f5..42668aeca57c 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1979,6 +1979,8 @@ static int r8a66597_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, static void r8a66597_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) +__acquires(r8a66597->lock) +__releases(r8a66597->lock) { struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd); struct r8a66597_pipe *pipe = (struct r8a66597_pipe *)hep->hcpriv; @@ -1991,13 +1993,14 @@ static void r8a66597_endpoint_disable(struct usb_hcd *hcd, return; pipenum = pipe->info.pipenum; + spin_lock_irqsave(&r8a66597->lock, flags); if (pipenum == 0) { kfree(hep->hcpriv); hep->hcpriv = NULL; + spin_unlock_irqrestore(&r8a66597->lock, flags); return; } - spin_lock_irqsave(&r8a66597->lock, flags); pipe_stop(r8a66597, pipe); pipe_irq_disable(r8a66597, pipenum); disable_irq_empty(r8a66597, pipenum); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 01b5818a4be5..e2eece693655 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -714,13 +714,6 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port, } } -/* Updates Link Status for USB 2.1 port */ -static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg) -{ - if ((status_reg & PORT_PLS_MASK) == XDEV_U2) - *status |= USB_PORT_STAT_L1; -} - /* Updates Link Status for super Speed port */ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, u32 *status, u32 status_reg) @@ -802,6 +795,100 @@ static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, } } +static int xhci_handle_usb2_port_link_resume(struct xhci_port *port, + u32 *status, u32 portsc, + unsigned long flags) +{ + struct xhci_bus_state *bus_state; + struct xhci_hcd *xhci; + struct usb_hcd *hcd; + int slot_id; + u32 wIndex; + + hcd = port->rhub->hcd; + bus_state = &port->rhub->bus_state; + xhci = hcd_to_xhci(hcd); + wIndex = port->hcd_portnum; + + if ((portsc & PORT_RESET) || !(portsc & PORT_PE)) { + *status = 0xffffffff; + return -EINVAL; + } + /* did port event handler already start resume timing? */ + if (!bus_state->resume_done[wIndex]) { + /* If not, maybe we are in a host initated resume? */ + if (test_bit(wIndex, &bus_state->resuming_ports)) { + /* Host initated resume doesn't time the resume + * signalling using resume_done[]. + * It manually sets RESUME state, sleeps 20ms + * and sets U0 state. This should probably be + * changed, but not right now. + */ + } else { + /* port resume was discovered now and here, + * start resume timing + */ + unsigned long timeout = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); + + set_bit(wIndex, &bus_state->resuming_ports); + bus_state->resume_done[wIndex] = timeout; + mod_timer(&hcd->rh_timer, timeout); + usb_hcd_start_port_resume(&hcd->self, wIndex); + } + /* Has resume been signalled for USB_RESUME_TIME yet? */ + } else if (time_after_eq(jiffies, bus_state->resume_done[wIndex])) { + int time_left; + + xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); + + set_bit(wIndex, &bus_state->rexit_ports); + + xhci_test_and_clear_bit(xhci, port, PORT_PLC); + xhci_set_link_state(xhci, port, XDEV_U0); + + spin_unlock_irqrestore(&xhci->lock, flags); + time_left = wait_for_completion_timeout( + &bus_state->rexit_done[wIndex], + msecs_to_jiffies(XHCI_MAX_REXIT_TIMEOUT_MS)); + spin_lock_irqsave(&xhci->lock, flags); + + if (time_left) { + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); + if (!slot_id) { + xhci_dbg(xhci, "slot_id is zero\n"); + *status = 0xffffffff; + return -ENODEV; + } + xhci_ring_device(xhci, slot_id); + } else { + int port_status = readl(port->addr); + + xhci_warn(xhci, "Port resume %i msec timed out, portsc = 0x%x\n", + XHCI_MAX_REXIT_TIMEOUT_MS, + port_status); + *status |= USB_PORT_STAT_SUSPEND; + clear_bit(wIndex, &bus_state->rexit_ports); + } + + usb_hcd_end_port_resume(&hcd->self, wIndex); + bus_state->port_c_suspend |= 1 << wIndex; + bus_state->suspended_ports &= ~(1 << wIndex); + } else { + /* + * The resume has been signaling for less than + * USB_RESUME_TIME. Report the port status as SUSPEND, + * let the usbcore check port status again and clear + * resume signaling later. + */ + *status |= USB_PORT_STAT_SUSPEND; + } + return 0; +} + static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) { u32 ext_stat = 0; @@ -818,6 +905,85 @@ static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) return ext_stat; } +static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, + u32 portsc) +{ + struct xhci_bus_state *bus_state; + struct xhci_hcd *xhci; + u32 link_state; + u32 portnum; + + bus_state = &port->rhub->bus_state; + xhci = hcd_to_xhci(port->rhub->hcd); + link_state = portsc & PORT_PLS_MASK; + portnum = port->hcd_portnum; + + /* USB3 specific wPortChange bits + * + * Port link change with port in resume state should not be + * reported to usbcore, as this is an internal state to be + * handled by xhci driver. Reporting PLC to usbcore may + * cause usbcore clearing PLC first and port change event + * irq won't be generated. + */ + + if (portsc & PORT_PLC && (link_state != XDEV_RESUME)) + *status |= USB_PORT_STAT_C_LINK_STATE << 16; + if (portsc & PORT_WRC) + *status |= USB_PORT_STAT_C_BH_RESET << 16; + if (portsc & PORT_CEC) + *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; + + /* USB3 specific wPortStatus bits */ + if (portsc & PORT_POWER) { + *status |= USB_SS_PORT_STAT_POWER; + /* link state handling */ + if (link_state == XDEV_U0) + bus_state->suspended_ports &= ~(1 << portnum); + } + + xhci_hub_report_usb3_link_state(xhci, status, portsc); + xhci_del_comp_mod_timer(xhci, portsc, portnum); +} + +static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, + u32 portsc, unsigned long flags) +{ + struct xhci_bus_state *bus_state; + u32 link_state; + u32 portnum; + int ret; + + bus_state = &port->rhub->bus_state; + link_state = portsc & PORT_PLS_MASK; + portnum = port->hcd_portnum; + + /* USB2 wPortStatus bits */ + if (portsc & PORT_POWER) { + *status |= USB_PORT_STAT_POWER; + + /* link state is only valid if port is powered */ + if (link_state == XDEV_U3) + *status |= USB_PORT_STAT_SUSPEND; + if (link_state == XDEV_U2) + *status |= USB_PORT_STAT_L1; + if (link_state == XDEV_U0) { + bus_state->resume_done[portnum] = 0; + clear_bit(portnum, &bus_state->resuming_ports); + if (bus_state->suspended_ports & (1 << portnum)) { + bus_state->suspended_ports &= ~(1 << portnum); + bus_state->port_c_suspend |= 1 << portnum; + } + } + if (link_state == XDEV_RESUME) { + ret = xhci_handle_usb2_port_link_resume(port, status, + portsc, flags); + if (ret) + return; + } + } +} + /* * Converts a raw xHCI port status into the format that external USB 2.0 or USB * 3.0 hubs use. @@ -835,16 +1001,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, __releases(&xhci->lock) __acquires(&xhci->lock) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 status = 0; - int slot_id; struct xhci_hub *rhub; struct xhci_port *port; rhub = xhci_get_rhub(hcd); port = rhub->ports[wIndex]; - /* wPortChange bits */ + /* common wPortChange bits */ if (raw_port_status & PORT_CSC) status |= USB_PORT_STAT_C_CONNECTION << 16; if (raw_port_status & PORT_PEC) @@ -853,107 +1017,25 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_C_OVERCURRENT << 16; if ((raw_port_status & PORT_RC)) status |= USB_PORT_STAT_C_RESET << 16; - /* USB3.0 only */ - if (hcd->speed >= HCD_USB3) { - /* Port link change with port in resume state should not be - * reported to usbcore, as this is an internal state to be - * handled by xhci driver. Reporting PLC to usbcore may - * cause usbcore clearing PLC first and port change event - * irq won't be generated. - */ - if ((raw_port_status & PORT_PLC) && - (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) - status |= USB_PORT_STAT_C_LINK_STATE << 16; - if ((raw_port_status & PORT_WRC)) - status |= USB_PORT_STAT_C_BH_RESET << 16; - if ((raw_port_status & PORT_CEC)) - status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; - } - if (hcd->speed < HCD_USB3) { - if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3 - && (raw_port_status & PORT_POWER)) - status |= USB_PORT_STAT_SUSPEND; + /* common wPortStatus bits */ + if (raw_port_status & PORT_CONNECT) { + status |= USB_PORT_STAT_CONNECTION; + status |= xhci_port_speed(raw_port_status); } - if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME && - !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) { - if ((raw_port_status & PORT_RESET) || - !(raw_port_status & PORT_PE)) - return 0xffffffff; - /* did port event handler already start resume timing? */ - if (!bus_state->resume_done[wIndex]) { - /* If not, maybe we are in a host initated resume? */ - if (test_bit(wIndex, &bus_state->resuming_ports)) { - /* Host initated resume doesn't time the resume - * signalling using resume_done[]. - * It manually sets RESUME state, sleeps 20ms - * and sets U0 state. This should probably be - * changed, but not right now. - */ - } else { - /* port resume was discovered now and here, - * start resume timing - */ - unsigned long timeout = jiffies + - msecs_to_jiffies(USB_RESUME_TIMEOUT); - - set_bit(wIndex, &bus_state->resuming_ports); - bus_state->resume_done[wIndex] = timeout; - mod_timer(&hcd->rh_timer, timeout); - usb_hcd_start_port_resume(&hcd->self, wIndex); - } - /* Has resume been signalled for USB_RESUME_TIME yet? */ - } else if (time_after_eq(jiffies, - bus_state->resume_done[wIndex])) { - int time_left; - - xhci_dbg(xhci, "Resume USB2 port %d\n", - wIndex + 1); - bus_state->resume_done[wIndex] = 0; - clear_bit(wIndex, &bus_state->resuming_ports); - - set_bit(wIndex, &bus_state->rexit_ports); - - xhci_test_and_clear_bit(xhci, port, PORT_PLC); - xhci_set_link_state(xhci, port, XDEV_U0); - - spin_unlock_irqrestore(&xhci->lock, flags); - time_left = wait_for_completion_timeout( - &bus_state->rexit_done[wIndex], - msecs_to_jiffies( - XHCI_MAX_REXIT_TIMEOUT_MS)); - spin_lock_irqsave(&xhci->lock, flags); - - if (time_left) { - slot_id = xhci_find_slot_id_by_port(hcd, - xhci, wIndex + 1); - if (!slot_id) { - xhci_dbg(xhci, "slot_id is zero\n"); - return 0xffffffff; - } - xhci_ring_device(xhci, slot_id); - } else { - int port_status = readl(port->addr); - xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", - XHCI_MAX_REXIT_TIMEOUT_MS, - port_status); - status |= USB_PORT_STAT_SUSPEND; - clear_bit(wIndex, &bus_state->rexit_ports); - } + if (raw_port_status & PORT_PE) + status |= USB_PORT_STAT_ENABLE; + if (raw_port_status & PORT_OC) + status |= USB_PORT_STAT_OVERCURRENT; + if (raw_port_status & PORT_RESET) + status |= USB_PORT_STAT_RESET; - usb_hcd_end_port_resume(&hcd->self, wIndex); - bus_state->port_c_suspend |= 1 << wIndex; - bus_state->suspended_ports &= ~(1 << wIndex); - } else { - /* - * The resume has been signaling for less than - * USB_RESUME_TIME. Report the port status as SUSPEND, - * let the usbcore check port status again and clear - * resume signaling later. - */ - status |= USB_PORT_STAT_SUSPEND; - } - } + /* USB2 and USB3 specific bits, including Port Link State */ + if (hcd->speed >= HCD_USB3) + xhci_get_usb3_port_status(port, &status, raw_port_status); + else + xhci_get_usb2_port_status(port, &status, raw_port_status, + flags); /* * Clear stale usb2 resume signalling variables in case port changed * state during resume signalling. For example on error @@ -967,44 +1049,6 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, usb_hcd_end_port_resume(&hcd->self, wIndex); } - - if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 && - (raw_port_status & PORT_POWER)) { - if (bus_state->suspended_ports & (1 << wIndex)) { - bus_state->suspended_ports &= ~(1 << wIndex); - if (hcd->speed < HCD_USB3) - bus_state->port_c_suspend |= 1 << wIndex; - } - bus_state->resume_done[wIndex] = 0; - clear_bit(wIndex, &bus_state->resuming_ports); - } - if (raw_port_status & PORT_CONNECT) { - status |= USB_PORT_STAT_CONNECTION; - status |= xhci_port_speed(raw_port_status); - } - if (raw_port_status & PORT_PE) - status |= USB_PORT_STAT_ENABLE; - if (raw_port_status & PORT_OC) - status |= USB_PORT_STAT_OVERCURRENT; - if (raw_port_status & PORT_RESET) - status |= USB_PORT_STAT_RESET; - if (raw_port_status & PORT_POWER) { - if (hcd->speed >= HCD_USB3) - status |= USB_SS_PORT_STAT_POWER; - else - status |= USB_PORT_STAT_POWER; - } - /* Update Port Link State */ - if (hcd->speed >= HCD_USB3) { - xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status); - /* - * Verify if all USB3 Ports Have entered U0 already. - * Delete Compliance Mode Timer if so. - */ - xhci_del_comp_mod_timer(xhci, raw_port_status, wIndex); - } else { - xhci_hub_report_usb2_link_state(&status, raw_port_status); - } if (bus_state->port_c_suspend & (1 << wIndex)) status |= USB_PORT_STAT_C_SUSPEND << 16; @@ -1031,7 +1075,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; spin_lock_irqsave(&xhci->lock, flags); switch (typeReq) { @@ -1421,7 +1465,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; /* Initial status is no changes */ retval = (max_ports + 8) / 8; @@ -1480,7 +1524,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; wake_enabled = hcd->self.root_hub->do_remote_wakeup; spin_lock_irqsave(&xhci->lock, flags); @@ -1623,7 +1667,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; if (time_before(jiffies, bus_state->next_statechange)) msleep(5); @@ -1724,13 +1768,10 @@ int xhci_bus_resume(struct usb_hcd *hcd) unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct xhci_bus_state *bus_state; - - bus_state = &xhci->bus_state[hcd_index(hcd)]; + struct xhci_hub *rhub = xhci_get_rhub(hcd); /* USB3 port wakeups are reported via usb_wakeup_notification() */ - return bus_state->resuming_ports; /* USB2 ports only */ + return rhub->bus_state.resuming_ports; /* USB2 ports only */ } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index b1f27aa38b10..36a3eb8849f1 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1922,8 +1922,8 @@ no_bw: xhci->page_size = 0; xhci->page_shift = 0; - xhci->bus_state[0].bus_suspended = 0; - xhci->bus_state[1].bus_suspended = 0; + xhci->usb2_rhub.bus_state.bus_suspended = 0; + xhci->usb3_rhub.bus_state.bus_suspended = 0; } static int xhci_test_trb_in_td(struct xhci_hcd *xhci, @@ -2181,23 +2181,11 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, if (major_revision < 0x03 && xhci->num_ext_caps < max_caps) xhci->ext_caps[xhci->num_ext_caps++] = temp; - /* Check the host's USB2 LPM capability */ - if ((xhci->hci_version == 0x96) && (major_revision != 0x03) && - (temp & XHCI_L1C)) { + if ((xhci->hci_version >= 0x100) && (major_revision != 0x03) && + (temp & XHCI_HLC)) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 0.96: support USB2 software lpm"); - xhci->sw_lpm_support = 1; - } - - if ((xhci->hci_version >= 0x100) && (major_revision != 0x03)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 1.0: support USB2 software lpm"); - xhci->sw_lpm_support = 1; - if (temp & XHCI_HLC) { - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 1.0: support USB2 hardware lpm"); - xhci->hw_lpm_support = 1; - } + "xHCI 1.0: support USB2 hardware lpm"); + xhci->hw_lpm_support = 1; } port_offset--; @@ -2536,10 +2524,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) for (i = 0; i < MAX_HC_SLOTS; i++) xhci->devs[i] = NULL; for (i = 0; i < USB_MAXCHILDREN; i++) { - xhci->bus_state[0].resume_done[i] = 0; - xhci->bus_state[1].resume_done[i] = 0; + xhci->usb2_rhub.bus_state.resume_done[i] = 0; + xhci->usb3_rhub.bus_state.resume_done[i] = 0; /* Only the USB 2.0 completions will ever be used. */ - init_completion(&xhci->bus_state[1].rexit_done[i]); + init_completion(&xhci->usb2_rhub.bus_state.rexit_done[i]); } if (scratchpad_alloc(xhci, flags)) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 65750582133f..40fa25c4d041 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1593,7 +1593,7 @@ static void handle_port_status(struct xhci_hcd *xhci, } hcd = port->rhub->hcd; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &port->rhub->bus_state; hcd_portnum = port->hcd_portnum; portsc = readl(port->addr); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index dae3be1b9c8f..46ab9c041091 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -169,7 +169,7 @@ int xhci_reset(struct xhci_hcd *xhci) { u32 command; u32 state; - int ret, i; + int ret; state = readl(&xhci->op_regs->status); @@ -215,11 +215,12 @@ int xhci_reset(struct xhci_hcd *xhci) ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, 10 * 1000 * 1000); - for (i = 0; i < 2; i++) { - xhci->bus_state[i].port_c_suspend = 0; - xhci->bus_state[i].suspended_ports = 0; - xhci->bus_state[i].resuming_ports = 0; - } + xhci->usb2_rhub.bus_state.port_c_suspend = 0; + xhci->usb2_rhub.bus_state.suspended_ports = 0; + xhci->usb2_rhub.bus_state.resuming_ports = 0; + xhci->usb3_rhub.bus_state.port_c_suspend = 0; + xhci->usb3_rhub.bus_state.suspended_ports = 0; + xhci->usb3_rhub.bus_state.resuming_ports = 0; return ret; } @@ -1087,9 +1088,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. */ - if (time_before(jiffies, xhci->bus_state[0].next_statechange) || - time_before(jiffies, - xhci->bus_state[1].next_statechange)) + + if (time_before(jiffies, xhci->usb2_rhub.bus_state.next_statechange) || + time_before(jiffies, xhci->usb3_rhub.bus_state.next_statechange)) msleep(100); set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -4388,8 +4389,7 @@ static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); int portnum = udev->portnum - 1; - if (hcd->speed >= HCD_USB3 || !xhci->sw_lpm_support || - !udev->lpm_capable) + if (hcd->speed >= HCD_USB3 || !udev->lpm_capable) return 0; /* we only support lpm for non-hub device connected to root hub yet */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 011dd45f8718..652dc36e3012 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1682,13 +1682,6 @@ struct xhci_bus_state { */ #define XHCI_MAX_REXIT_TIMEOUT_MS 20 -static inline unsigned int hcd_index(struct usb_hcd *hcd) -{ - if (hcd->speed >= HCD_USB3) - return 0; - else - return 1; -} struct xhci_port { __le32 __iomem *addr; int hw_portnum; @@ -1700,6 +1693,8 @@ struct xhci_hub { struct xhci_port **ports; unsigned int num_ports; struct usb_hcd *hcd; + /* keep track of bus suspend info */ + struct xhci_bus_state bus_state; /* supported prococol extended capabiliy values */ u8 maj_rev; u8 min_rev; @@ -1854,13 +1849,9 @@ struct xhci_hcd { unsigned int num_active_eps; unsigned int limit_active_eps; - /* There are two roothubs to keep track of bus suspend info for */ - struct xhci_bus_state bus_state[2]; struct xhci_port *hw_ports; struct xhci_hub usb2_rhub; struct xhci_hub usb3_rhub; - /* support xHCI 0.96 spec USB2 software LPM */ - unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ unsigned hw_lpm_support:1; /* Broken Suspend flag for SNPS Suspend resume issue */ diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 39ca31b4de46..ac92725458b5 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -69,7 +69,6 @@ struct appledisplay { struct delayed_work work; int button_pressed; - spinlock_t lock; struct mutex sysfslock; /* concurrent read and write */ }; @@ -79,7 +78,6 @@ static void appledisplay_complete(struct urb *urb) { struct appledisplay *pdata = urb->context; struct device *dev = &pdata->udev->dev; - unsigned long flags; int status = urb->status; int retval; @@ -105,8 +103,6 @@ static void appledisplay_complete(struct urb *urb) goto exit; } - spin_lock_irqsave(&pdata->lock, flags); - switch(pdata->urbdata[1]) { case ACD_BTN_BRIGHT_UP: case ACD_BTN_BRIGHT_DOWN: @@ -119,8 +115,6 @@ static void appledisplay_complete(struct urb *urb) break; } - spin_unlock_irqrestore(&pdata->lock, flags); - exit: retval = usb_submit_urb(pdata->urb, GFP_ATOMIC); if (retval) { @@ -229,7 +223,6 @@ static int appledisplay_probe(struct usb_interface *iface, pdata->udev = udev; - spin_lock_init(&pdata->lock); INIT_DELAYED_WORK(&pdata->work, appledisplay_work); mutex_init(&pdata->sysfslock); @@ -261,6 +254,7 @@ static int appledisplay_probe(struct usb_interface *iface, usb_rcvintpipe(udev, int_in_endpointAddr), pdata->urbdata, ACD_URB_BUFFER_LEN, appledisplay_complete, pdata, 1); + pdata->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; if (usb_submit_urb(pdata->urb, GFP_KERNEL)) { retval = -EIO; dev_err(&iface->dev, "Submitting URB failed\n"); diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index ae70b9bfd797..4fee200795a5 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -180,7 +180,7 @@ static void mtu3_intr_enable(struct mtu3 *mtu) mtu3_writel(mbase, U3D_LV1IESR, value); /* Enable U2 common USB interrupts */ - value = SUSPEND_INTR | RESUME_INTR | RESET_INTR | LPM_RESUME_INTR; + value = SUSPEND_INTR | RESUME_INTR | RESET_INTR; mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value); if (mtu->is_u3_ip) { @@ -484,7 +484,7 @@ void mtu3_ep0_setup(struct mtu3 *mtu) mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr); /* Enable EP0 interrupt */ - mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR); + mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR | SETUPENDISR); } static int mtu3_mem_alloc(struct mtu3 *mtu) @@ -578,12 +578,16 @@ static void mtu3_regs_init(struct mtu3 *mtu) if (mtu->is_u3_ip) { /* disable LGO_U1/U2 by default */ mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL, - SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE | SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE); + /* enable accept LGO_U1/U2 link command from host */ + mtu3_setbits(mbase, U3D_LINK_POWER_CONTROL, + SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE); /* device responses to u3_exit from host automatically */ mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN); /* automatically build U2 link when U3 detect fail */ mtu3_setbits(mbase, U3D_USB2_TEST_MODE, U2U3_AUTO_SWITCH); + /* auto clear SOFT_CONN when clear USB3_EN if work as HS */ + mtu3_setbits(mbase, U3D_U3U2_SWITCH_CTRL, SOFTCON_CLR_AUTO_EN); } mtu3_set_speed(mtu); @@ -592,10 +596,10 @@ static void mtu3_regs_init(struct mtu3 *mtu) mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK); /* U2/U3 detected by HW */ mtu3_writel(mbase, U3D_DEVICE_CONF, 0); - /* enable QMU 16B checksum */ - mtu3_setbits(mbase, U3D_QCR0, QMU_CS16B_EN); /* vbus detected by HW */ mtu3_clrbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON); + /* enable automatical HWRW from L1 */ + mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, LPM_HRWE); } static irqreturn_t mtu3_link_isr(struct mtu3 *mtu) @@ -708,12 +712,6 @@ static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu) if (u2comm & RESET_INTR) mtu3_gadget_reset(mtu); - if (u2comm & LPM_RESUME_INTR) { - if (!(mtu3_readl(mbase, U3D_POWER_MANAGEMENT) & LPM_HRWE)) - mtu3_setbits(mbase, U3D_USB20_MISC_CONTROL, - LPM_U3_ACK_EN); - } - return IRQ_HANDLED; } diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c index 25216e79cd6e..7cb7ac980446 100644 --- a/drivers/usb/mtu3/mtu3_gadget_ep0.c +++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c @@ -336,9 +336,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu, lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); if (set) - lpc |= SW_U1_ACCEPT_ENABLE; + lpc |= SW_U1_REQUEST_ENABLE; else - lpc &= ~SW_U1_ACCEPT_ENABLE; + lpc &= ~SW_U1_REQUEST_ENABLE; mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); mtu->u1_enable = !!set; @@ -351,9 +351,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu, lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); if (set) - lpc |= SW_U2_ACCEPT_ENABLE; + lpc |= SW_U2_REQUEST_ENABLE; else - lpc &= ~SW_U2_ACCEPT_ENABLE; + lpc &= ~SW_U2_REQUEST_ENABLE; mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); mtu->u2_enable = !!set; @@ -692,9 +692,13 @@ irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu) mtu3_writel(mbase, U3D_EPISR, int_status); /* W1C */ /* only handle ep0's */ - if (!(int_status & EP0ISR)) + if (!(int_status & (EP0ISR | SETUPENDISR))) return IRQ_NONE; + /* abort current SETUP, and process new one */ + if (int_status & SETUPENDISR) + mtu->ep0_state = MU3D_EP0_STATE_SETUP; + csr = mtu3_readl(mbase, U3D_EP0CSR); dev_dbg(mtu->dev, "%s csr=0x%x\n", __func__, csr); diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h index a45bb253939f..1d65b7476f23 100644 --- a/drivers/usb/mtu3/mtu3_hw_regs.h +++ b/drivers/usb/mtu3/mtu3_hw_regs.h @@ -104,6 +104,7 @@ /* U3D_EPISR */ #define EPRISR(x) (BIT(16) << (x)) +#define SETUPENDISR BIT(16) #define EPTISR(x) (BIT(0) << (x)) #define EP0ISR BIT(0) @@ -267,6 +268,8 @@ #define U3D_LTSSM_INTR_ENABLE (SSUSB_USB3_MAC_CSR_BASE + 0x013C) #define U3D_LTSSM_INTR (SSUSB_USB3_MAC_CSR_BASE + 0x0140) +#define U3D_U3U2_SWITCH_CTRL (SSUSB_USB3_MAC_CSR_BASE + 0x0170) + /*---------------- SSUSB_USB3_MAC_CSR FIELD DEFINITION ----------------*/ /* U3D_LTSSM_CTRL */ @@ -301,6 +304,9 @@ #define SS_DISABLE_INTR BIT(1) #define SS_INACTIVE_INTR BIT(0) +/* U3D_U3U2_SWITCH_CTRL */ +#define SOFTCON_CLR_AUTO_EN BIT(0) + /*---------------- SSUSB_USB3_SYS_CSR REGISTER DEFINITION ----------------*/ #define U3D_LINK_UX_INACT_TIMER (SSUSB_USB3_SYS_CSR_BASE + 0x020C) diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index 46551f6d16fd..e086630e41a9 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -200,6 +200,14 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb) mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); udelay(1); mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); + + /* + * device ip may be powered on in firmware/BROM stage before entering + * kernel stage; + * power down device ip, otherwise ip-sleep will fail when working as + * host only mode + */ + mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); } /* ignore the error if the clock does not exist */ diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c index ff62ba232177..09f19f70fe8f 100644 --- a/drivers/usb/mtu3/mtu3_qmu.c +++ b/drivers/usb/mtu3/mtu3_qmu.c @@ -154,27 +154,6 @@ void mtu3_gpd_ring_free(struct mtu3_ep *mep) memset(ring, 0, sizeof(*ring)); } -/* - * calculate check sum of a gpd or bd - * add "noinline" and "mb" to prevent wrong calculation - */ -static noinline u8 qmu_calc_checksum(u8 *data) -{ - u8 chksum = 0; - int i; - - data[1] = 0x0; /* set checksum to 0 */ - - mb(); /* ensure the gpd/bd is really up-to-date */ - for (i = 0; i < QMU_CHECKSUM_LEN; i++) - chksum += data[i]; - - /* Default: HWO=1, @flag[bit0] */ - chksum += 1; - - return 0xFF - chksum; -} - void mtu3_qmu_resume(struct mtu3_ep *mep) { struct mtu3 *mtu = mep->mtu; @@ -260,7 +239,6 @@ static int mtu3_prepare_tx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq) if (req->zero) gpd->ext_flag |= GPD_EXT_FLAG_ZLP; - gpd->chksum = qmu_calc_checksum((u8 *)gpd); gpd->flag |= GPD_FLAGS_HWO; mreq->gpd = gpd; @@ -295,7 +273,6 @@ static int mtu3_prepare_rx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq) gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma)); ext_addr |= GPD_EXT_NGP(upper_32_bits(enq_dma)); gpd->rx_ext_addr = cpu_to_le16(ext_addr); - gpd->chksum = qmu_calc_checksum((u8 *)gpd); gpd->flag |= GPD_FLAGS_HWO; mreq->gpd = gpd; @@ -323,7 +300,6 @@ int mtu3_qmu_start(struct mtu3_ep *mep) /* set QMU start address */ write_txq_start_addr(mbase, epnum, ring->dma); mtu3_setbits(mbase, MU3D_EP_TXCR0(epnum), TX_DMAREQEN); - mtu3_setbits(mbase, U3D_QCR0, QMU_TX_CS_EN(epnum)); /* send zero length packet according to ZLP flag in GPD */ mtu3_setbits(mbase, U3D_QCR1, QMU_TX_ZLP(epnum)); mtu3_writel(mbase, U3D_TQERRIESR0, @@ -338,7 +314,6 @@ int mtu3_qmu_start(struct mtu3_ep *mep) } else { write_rxq_start_addr(mbase, epnum, ring->dma); mtu3_setbits(mbase, MU3D_EP_RXCR0(epnum), RX_DMAREQEN); - mtu3_setbits(mbase, U3D_QCR0, QMU_RX_CS_EN(epnum)); /* don't expect ZLP */ mtu3_clrbits(mbase, U3D_QCR3, QMU_RX_ZLP(epnum)); /* move to next GPD when receive ZLP */ @@ -427,7 +402,7 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum) return; } - dev_dbg(mtu->dev, "%s send ZLP for req=%p\n", __func__, mreq); + dev_dbg(mtu->dev, "%s send ZLP for req=%p\n", __func__, req); mtu3_clrbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_DMAREQEN); @@ -441,7 +416,6 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum) /* by pass the current GDP */ gpd_current->flag |= GPD_FLAGS_BPS; - gpd_current->chksum = qmu_calc_checksum((u8 *)gpd_current); gpd_current->flag |= GPD_FLAGS_HWO; /*enable DMAREQEN, switch back to QMU mode */ diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 23a0df79ef21..403eb97915f8 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -181,9 +181,11 @@ static void dsps_musb_enable(struct musb *musb) musb_writel(reg_base, wrp->epintr_set, epmask); musb_writel(reg_base, wrp->coreintr_set, coremask); - /* start polling for ID change in dual-role idle mode */ - if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && - musb->port_mode == MUSB_OTG) + /* + * start polling for runtime PM active and idle, + * and for ID change in dual-role idle mode. + */ + if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) dsps_mod_timer(glue, -1); } @@ -227,8 +229,13 @@ static int dsps_check_status(struct musb *musb, void *unused) switch (musb->xceiv->otg->state) { case OTG_STATE_A_WAIT_VRISE: - dsps_mod_timer_optional(glue); - break; + if (musb->port_mode == MUSB_HOST) { + musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; + dsps_mod_timer_optional(glue); + break; + } + /* fall through */ + case OTG_STATE_A_WAIT_BCON: /* keep VBUS on for host-only mode */ if (musb->port_mode == MUSB_HOST) { @@ -249,6 +256,10 @@ static int dsps_check_status(struct musb *musb, void *unused) musb->xceiv->otg->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); } + + if (musb->port_mode == MUSB_PERIPHERAL) + skip_session = 1; + if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session) musb_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index a3e1290d682d..249fbee97f3f 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -540,6 +540,10 @@ static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) */ static const struct of_device_id usbhs_of_match[] = { { + .compatible = "renesas,usbhs-r8a774c0", + .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL, + }, + { .compatible = "renesas,usbhs-r8a7790", .data = (void *)USBHS_TYPE_RCAR_GEN2, }, @@ -841,7 +845,7 @@ static int usbhs_remove(struct platform_device *pdev) return 0; } -static int usbhsc_suspend(struct device *dev) +static __maybe_unused int usbhsc_suspend(struct device *dev) { struct usbhs_priv *priv = dev_get_drvdata(dev); struct usbhs_mod *mod = usbhs_mod_get_current(priv); @@ -857,7 +861,7 @@ static int usbhsc_suspend(struct device *dev) return 0; } -static int usbhsc_resume(struct device *dev) +static __maybe_unused int usbhsc_resume(struct device *dev) { struct usbhs_priv *priv = dev_get_drvdata(dev); struct platform_device *pdev = usbhs_priv_to_pdev(priv); @@ -874,24 +878,7 @@ static int usbhsc_resume(struct device *dev) return 0; } -static int usbhsc_runtime_nop(struct device *dev) -{ - /* Runtime PM callback shared between ->runtime_suspend() - * and ->runtime_resume(). Simply returns success. - * - * This driver re-initializes all registers after - * pm_runtime_get_sync() anyway so there is no need - * to save and restore registers here. - */ - return 0; -} - -static const struct dev_pm_ops usbhsc_pm_ops = { - .suspend = usbhsc_suspend, - .resume = usbhsc_resume, - .runtime_suspend = usbhsc_runtime_nop, - .runtime_resume = usbhsc_runtime_nop, -}; +static SIMPLE_DEV_PM_OPS(usbhsc_pm_ops, usbhsc_suspend, usbhsc_resume); static struct platform_driver renesas_usbhs_driver = { .driver = { diff --git a/drivers/usb/roles/Kconfig b/drivers/usb/roles/Kconfig index f5a5e6f79f1b..e4194ac94510 100644 --- a/drivers/usb/roles/Kconfig +++ b/drivers/usb/roles/Kconfig @@ -1,3 +1,16 @@ +config USB_ROLE_SWITCH + tristate "USB Role Switch Support" + help + USB Role Switch is a device that can select the USB role - host or + device - for a USB port (connector). In most cases dual-role capable + USB controller will also represent the switch, but on some platforms + multiplexer/demultiplexer switch is used to route the data lines on + the USB connector between separate USB host and device controllers. + + Say Y here if your USB connectors support both device and host roles. + To compile the driver as module, choose M here: the module will be + called roles.ko. + if USB_ROLE_SWITCH config USB_ROLES_INTEL_XHCI diff --git a/drivers/usb/roles/Makefile b/drivers/usb/roles/Makefile index e44b179ba275..c02873206fc1 100644 --- a/drivers/usb/roles/Makefile +++ b/drivers/usb/roles/Makefile @@ -1 +1,3 @@ -obj-$(CONFIG_USB_ROLES_INTEL_XHCI) += intel-xhci-usb-role-switch.o +obj-$(CONFIG_USB_ROLE_SWITCH) += roles.o +roles-y := class.o +obj-$(CONFIG_USB_ROLES_INTEL_XHCI) += intel-xhci-usb-role-switch.o diff --git a/drivers/usb/common/roles.c b/drivers/usb/roles/class.c index 99116af07f1d..99116af07f1d 100644 --- a/drivers/usb/common/roles.c +++ b/drivers/usb/roles/class.c diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c index 380933db34dd..2b39bda035c7 100644 --- a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534.c @@ -45,14 +45,17 @@ #define F81534_CONFIG1_REG (0x09 + F81534_UART_BASE_ADDRESS) #define F81534_DEF_CONF_ADDRESS_START 0x3000 -#define F81534_DEF_CONF_SIZE 8 +#define F81534_DEF_CONF_SIZE 12 #define F81534_CUSTOM_ADDRESS_START 0x2f00 #define F81534_CUSTOM_DATA_SIZE 0x10 #define F81534_CUSTOM_NO_CUSTOM_DATA 0xff #define F81534_CUSTOM_VALID_TOKEN 0xf0 #define F81534_CONF_OFFSET 1 -#define F81534_CONF_GPIO_OFFSET 4 +#define F81534_CONF_INIT_GPIO_OFFSET 4 +#define F81534_CONF_WORK_GPIO_OFFSET 8 +#define F81534_CONF_GPIO_SHUTDOWN 7 +#define F81534_CONF_GPIO_RS232 1 #define F81534_MAX_DATA_BLOCK 64 #define F81534_MAX_BUS_RETRY 20 @@ -1337,8 +1340,19 @@ static int f81534_set_port_output_pin(struct usb_serial_port *port) serial_priv = usb_get_serial_data(serial); port_priv = usb_get_serial_port_data(port); - idx = F81534_CONF_GPIO_OFFSET + port_priv->phy_num; + idx = F81534_CONF_INIT_GPIO_OFFSET + port_priv->phy_num; value = serial_priv->conf_data[idx]; + if (value >= F81534_CONF_GPIO_SHUTDOWN) { + /* + * Newer IC configure will make transceiver in shutdown mode on + * initial power on. We need enable it before using UARTs. + */ + idx = F81534_CONF_WORK_GPIO_OFFSET + port_priv->phy_num; + value = serial_priv->conf_data[idx]; + if (value >= F81534_CONF_GPIO_SHUTDOWN) + value = F81534_CONF_GPIO_RS232; + } + pins = &f81534_port_out_pins[port_priv->phy_num]; for (i = 0; i < ARRAY_SIZE(pins->pin); ++i) { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 609198d9594c..1ab2a6191013 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1130,7 +1130,7 @@ static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base) { unsigned short int divisor; /* divisor shifted 3 bits to the left */ - int divisor3 = base / 2 / baud; + int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud); if ((divisor3 & 0x7) == 7) divisor3++; /* round x.7/8 up to x+1 */ divisor = divisor3 >> 3; @@ -1156,7 +1156,7 @@ static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; u32 divisor; /* divisor shifted 3 bits to the left */ - int divisor3 = base / 2 / baud; + int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud); divisor = divisor3 >> 3; divisor |= (u32)divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ @@ -1179,7 +1179,7 @@ static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) int divisor3; /* hi-speed baud rate is 10-bit sampling instead of 16-bit */ - divisor3 = base * 8 / (baud * 10); + divisor3 = DIV_ROUND_CLOSEST(8 * base, 10 * baud); divisor = divisor3 >> 3; divisor |= (u32)divfrac[divisor3 & 0x7] << 14; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 88828b4b8c44..a698d46ba773 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -94,6 +94,7 @@ /* The native mos7840/7820 component */ #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7840 0x7840 +#define MOSCHIP_DEVICE_ID_7843 0x7843 #define MOSCHIP_DEVICE_ID_7820 0x7820 #define MOSCHIP_DEVICE_ID_7810 0x7810 /* The native component can have its vendor/device id's overridden @@ -176,6 +177,7 @@ enum mos7840_flag { static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, + {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7843)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)}, @@ -298,15 +300,10 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, val = val & 0x00ff; /* For the UART control registers, the application number need to be Or'ed */ - if (port->serial->num_ports == 4) { + if (port->serial->num_ports == 2 && port->port_number != 0) + val |= ((__u16)port->port_number + 2) << 8; + else val |= ((__u16)port->port_number + 1) << 8; - } else { - if (port->port_number == 0) { - val |= ((__u16)port->port_number + 1) << 8; - } else { - val |= ((__u16)port->port_number + 2) << 8; - } - } dev_dbg(&port->dev, "%s application number is %x\n", __func__, val); return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE, val, reg, NULL, 0, @@ -332,15 +329,10 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, return -ENOMEM; /* Wval is same as application number */ - if (port->serial->num_ports == 4) { + if (port->serial->num_ports == 2 && port->port_number != 0) + Wval = ((__u16)port->port_number + 2) << 8; + else Wval = ((__u16)port->port_number + 1) << 8; - } else { - if (port->port_number == 0) { - Wval = ((__u16)port->port_number + 1) << 8; - } else { - Wval = ((__u16)port->port_number + 2) << 8; - } - } dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval); ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH, @@ -601,7 +593,7 @@ static void mos7840_interrupt_callback(struct urb *urb) struct usb_serial *serial; __u16 Data; unsigned char *data; - __u8 sp[5], st; + __u8 sp[5]; int i, rv = 0; __u16 wval, wreg = 0; int status = urb->status; @@ -644,7 +636,6 @@ static void mos7840_interrupt_callback(struct urb *urb) sp[1] = (__u8) data[1]; sp[2] = (__u8) data[2]; sp[3] = (__u8) data[3]; - st = (__u8) data[4]; for (i = 0; i < serial->num_ports; i++) { mos7840_port = mos7840_get_port_private(serial->port[i]); @@ -1300,7 +1291,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, struct urb *urb; /* __u16 Data; */ const unsigned char *current_position = data; - unsigned char *data1; if (mos7840_port_paranoia_check(port, __func__)) return -1; @@ -1361,7 +1351,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, mos7840_bulk_out_data_callback, mos7840_port); } - data1 = urb->transfer_buffer; dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress); if (mos7840_port->has_led) @@ -1592,7 +1581,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, int divisor = 0; int status; __u16 Data; - unsigned char number; __u16 clk_sel_val; struct usb_serial_port *port; @@ -1606,8 +1594,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, if (mos7840_serial_paranoia_check(port->serial, __func__)) return -1; - number = mos7840_port->port->port_number; - dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate); /* reset clk_uart_sel in spregOffset */ if (baudRate > 115200) { @@ -1697,14 +1683,12 @@ static void mos7840_change_port_settings(struct tty_struct *tty, { int baud; unsigned cflag; - unsigned iflag; __u8 lData; __u8 lParity; __u8 lStop; int status; __u16 Data; struct usb_serial_port *port; - struct usb_serial *serial; if (mos7840_port == NULL) return; @@ -1717,8 +1701,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty, if (mos7840_serial_paranoia_check(port->serial, __func__)) return; - serial = port->serial; - if (!mos7840_port->open) { dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; @@ -1729,7 +1711,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty, lParity = LCR_PAR_NONE; cflag = tty->termios.c_cflag; - iflag = tty->termios.c_iflag; /* Change the number of bits */ switch (cflag & CSIZE) { @@ -2043,7 +2024,8 @@ static int mos7840_probe(struct usb_serial *serial, int device_type; if (product == MOSCHIP_DEVICE_ID_7810 || - product == MOSCHIP_DEVICE_ID_7820) { + product == MOSCHIP_DEVICE_ID_7820 || + product == MOSCHIP_DEVICE_ID_7843) { device_type = product; goto out; } @@ -2077,7 +2059,10 @@ static int mos7840_calc_num_ports(struct usb_serial *serial, int device_type = (unsigned long)usb_get_serial_data(serial); int num_ports; - num_ports = (device_type >> 4) & 0x000F; + if (device_type == MOSCHIP_DEVICE_ID_7843) + num_ports = 3; + else + num_ports = (device_type >> 4) & 0x000F; /* * num_ports is currently never zero as device_type is one of @@ -2132,22 +2117,16 @@ static int mos7840_port_probe(struct usb_serial_port *port) mos7840_port->SpRegOffset = 0x0; mos7840_port->ControlRegOffset = 0x1; mos7840_port->DcrRegOffset = 0x4; - } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0x8; - mos7840_port->ControlRegOffset = 0x9; - mos7840_port->DcrRegOffset = 0x16; - } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) { - mos7840_port->SpRegOffset = 0xa; - mos7840_port->ControlRegOffset = 0xb; - mos7840_port->DcrRegOffset = 0x19; - } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0xa; - mos7840_port->ControlRegOffset = 0xb; - mos7840_port->DcrRegOffset = 0x19; - } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0xc; - mos7840_port->ControlRegOffset = 0xd; - mos7840_port->DcrRegOffset = 0x1c; + } else { + u8 phy_num = mos7840_port->port_num; + + /* Port 2 in the 2-port case uses registers of port 3 */ + if (serial->num_ports == 2) + phy_num = 3; + + mos7840_port->SpRegOffset = 0x8 + 2 * (phy_num - 2); + mos7840_port->ControlRegOffset = 0x9 + 2 * (phy_num - 2); + mos7840_port->DcrRegOffset = 0x16 + 3 * (phy_num - 2); } mos7840_dump_serial_port(port, mos7840_port); mos7840_set_port_private(port, mos7840_port); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 1ce27f3ff7a7..aef15497ff31 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1955,6 +1955,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) }, { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, + { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */ + .driver_info = RSVD(4) | RSVD(5) }, + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ + .driver_info = RSVD(6) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index a4e0d13fc121..98e7a5df0f6d 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -91,9 +91,14 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) }, { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) }, { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 26965cc23c17..4e2554d55362 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -119,10 +119,15 @@ /* Hewlett-Packard POS Pole Displays */ #define HP_VENDOR_ID 0x03f0 +#define HP_LM920_PRODUCT_ID 0x026b +#define HP_TD620_PRODUCT_ID 0x0956 #define HP_LD960_PRODUCT_ID 0x0b39 #define HP_LCM220_PRODUCT_ID 0x3139 #define HP_LCM960_PRODUCT_ID 0x3239 #define HP_LD220_PRODUCT_ID 0x3524 +#define HP_LD220TA_PRODUCT_ID 0x4349 +#define HP_LD960TA_PRODUCT_ID 0x4439 +#define HP_LM940_PRODUCT_ID 0x5039 /* Cressi Edy (diving computer) PC interface */ #define CRESSI_VENDOR_ID 0x04b8 diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index f2fbe1ec9701..a62981ca7a73 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -500,7 +500,6 @@ static void qt2_process_read_urb(struct urb *urb) struct usb_serial *serial; struct qt2_serial_private *serial_priv; struct usb_serial_port *port; - struct qt2_port_private *port_priv; bool escapeflag; unsigned char *ch; int i; @@ -514,7 +513,6 @@ static void qt2_process_read_urb(struct urb *urb) serial = urb->context; serial_priv = usb_get_serial_data(serial); port = serial->port[serial_priv->current_port]; - port_priv = usb_get_serial_port_data(port); for (i = 0; i < urb->actual_length; i++) { ch = (unsigned char *)urb->transfer_buffer + i; @@ -566,7 +564,6 @@ static void qt2_process_read_urb(struct urb *urb) serial_priv->current_port = newport; port = serial->port[serial_priv->current_port]; - port_priv = usb_get_serial_port_data(port); i += 3; escapeflag = true; break; diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 4d261e4de9ad..c26129d5b943 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -1131,7 +1131,7 @@ static int ms_lib_alloc_writebuf(struct us_data *us) ms_lib_clear_writebuf(us); -return 0; + return 0; } static int ms_lib_force_setlogical_pair(struct us_data *us, u16 logblk, u16 phyblk) diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index 43b64d9309d0..e9344997329c 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -1765,7 +1765,7 @@ static int fusb302_probe(struct i2c_client *client, * to be set by the platform code which also registers the i2c client * for the fusb302. */ - if (device_property_read_string(dev, "fcs,extcon-name", &name) == 0) { + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { chip->extcon = extcon_get_extcon_dev(name); if (!chip->extcon) return -EPROBE_DEFER; diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index dbbd71f754d0..4bc29b586698 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -317,6 +317,9 @@ struct tcpm_port { /* Deadline in jiffies to exit src_try_wait state */ unsigned long max_wait; + /* port belongs to a self powered device */ + bool self_powered; + #ifdef CONFIG_DEBUG_FS struct dentry *dentry; struct mutex logbuffer_lock; /* log buffer access lock */ @@ -2210,7 +2213,8 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) unsigned int i, j, max_mw = 0, max_mv = 0; unsigned int min_src_mv, max_src_mv, src_ma, src_mw; unsigned int min_snk_mv, max_snk_mv; - u32 pdo; + unsigned int max_op_mv; + u32 pdo, src, snk; unsigned int src_pdo = 0, snk_pdo = 0; /* @@ -2260,16 +2264,18 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) continue; } - if (max_src_mv <= max_snk_mv && - min_src_mv >= min_snk_mv) { + if (min_src_mv <= max_snk_mv && + max_src_mv >= min_snk_mv) { + max_op_mv = min(max_src_mv, max_snk_mv); + src_mw = (max_op_mv * src_ma) / 1000; /* Prefer higher voltages if available */ if ((src_mw == max_mw && - min_src_mv > max_mv) || + max_op_mv > max_mv) || src_mw > max_mw) { src_pdo = i; snk_pdo = j; max_mw = src_mw; - max_mv = max_src_mv; + max_mv = max_op_mv; } } } @@ -2282,16 +2288,18 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) } if (src_pdo) { - pdo = port->source_caps[src_pdo]; - - port->pps_data.min_volt = pdo_pps_apdo_min_voltage(pdo); - port->pps_data.max_volt = pdo_pps_apdo_max_voltage(pdo); - port->pps_data.max_curr = - min_pps_apdo_current(pdo, port->snk_pdo[snk_pdo]); - port->pps_data.out_volt = - min(pdo_pps_apdo_max_voltage(pdo), port->pps_data.out_volt); - port->pps_data.op_curr = - min(port->pps_data.max_curr, port->pps_data.op_curr); + src = port->source_caps[src_pdo]; + snk = port->snk_pdo[snk_pdo]; + + port->pps_data.min_volt = max(pdo_pps_apdo_min_voltage(src), + pdo_pps_apdo_min_voltage(snk)); + port->pps_data.max_volt = min(pdo_pps_apdo_max_voltage(src), + pdo_pps_apdo_max_voltage(snk)); + port->pps_data.max_curr = min_pps_apdo_current(src, snk); + port->pps_data.out_volt = min(port->pps_data.max_volt, + port->pps_data.out_volt); + port->pps_data.op_curr = min(port->pps_data.max_curr, + port->pps_data.op_curr); } return src_pdo; @@ -3254,7 +3262,8 @@ static void run_state_machine(struct tcpm_port *port) case SRC_HARD_RESET_VBUS_OFF: tcpm_set_vconn(port, true); tcpm_set_vbus(port, false); - tcpm_set_roles(port, false, TYPEC_SOURCE, TYPEC_HOST); + tcpm_set_roles(port, port->self_powered, TYPEC_SOURCE, + TYPEC_HOST); tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SRC_RECOVER); break; case SRC_HARD_RESET_VBUS_ON: @@ -3266,8 +3275,10 @@ static void run_state_machine(struct tcpm_port *port) case SNK_HARD_RESET_SINK_OFF: memset(&port->pps_data, 0, sizeof(port->pps_data)); tcpm_set_vconn(port, false); - tcpm_set_charge(port, false); - tcpm_set_roles(port, false, TYPEC_SINK, TYPEC_DEVICE); + if (port->pd_capable) + tcpm_set_charge(port, false); + tcpm_set_roles(port, port->self_powered, TYPEC_SINK, + TYPEC_DEVICE); /* * VBUS may or may not toggle, depending on the adapter. * If it doesn't toggle, transition to SNK_HARD_RESET_SINK_ON @@ -3297,6 +3308,12 @@ static void run_state_machine(struct tcpm_port *port) * Similar, dual-mode ports in source mode should transition * to PE_SNK_Transition_to_default. */ + if (port->pd_capable) { + tcpm_set_current_limit(port, + tcpm_get_current_limit(port), + 5000); + tcpm_set_charge(port, true); + } tcpm_set_attached_state(port, true); tcpm_set_state(port, SNK_STARTUP, 0); break; @@ -4412,6 +4429,8 @@ sink: return -EINVAL; port->operating_snk_mw = mw / 1000; + port->self_powered = fwnode_property_read_bool(fwnode, "self-powered"); + return 0; } @@ -4720,6 +4739,7 @@ static int tcpm_copy_caps(struct tcpm_port *port, port->typec_caps.prefer_role = tcfg->default_role; port->typec_caps.type = tcfg->type; port->typec_caps.data = tcfg->data; + port->self_powered = port->tcpc->config->self_powered; return 0; } diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c index c0430a41e24b..b1b466cbc33e 100644 --- a/drivers/uwb/i1480/dfu/usb.c +++ b/drivers/uwb/i1480/dfu/usb.c @@ -309,7 +309,7 @@ int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size) if (result < 0) { dev_err(dev, "%s: cannot submit NEEP read: %d\n", cmd_name, result); - goto error_submit_ep1; + goto error_submit_ep1; } /* Now post the command on EP0 */ result = usb_control_msg( diff --git a/include/linux/phy/phy-mipi-dphy.h b/include/linux/phy/phy-mipi-dphy.h new file mode 100644 index 000000000000..c08aacc0ac35 --- /dev/null +++ b/include/linux/phy/phy-mipi-dphy.h @@ -0,0 +1,285 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + */ + +#ifndef __PHY_MIPI_DPHY_H_ +#define __PHY_MIPI_DPHY_H_ + +#include <video/videomode.h> + +/** + * struct phy_configure_opts_mipi_dphy - MIPI D-PHY configuration set + * + * This structure is used to represent the configuration state of a + * MIPI D-PHY phy. + */ +struct phy_configure_opts_mipi_dphy { + /** + * @clk_miss: + * + * Timeout, in picoseconds, for receiver to detect absence of + * Clock transitions and disable the Clock Lane HS-RX. + * + * Maximum value: 60000 ps + */ + unsigned int clk_miss; + + /** + * @clk_post: + * + * Time, in picoseconds, that the transmitter continues to + * send HS clock after the last associated Data Lane has + * transitioned to LP Mode. Interval is defined as the period + * from the end of @hs_trail to the beginning of @clk_trail. + * + * Minimum value: 60000 ps + 52 * @hs_clk_rate period in ps + */ + unsigned int clk_post; + + /** + * @clk_pre: + * + * Time, in UI, that the HS clock shall be driven by + * the transmitter prior to any associated Data Lane beginning + * the transition from LP to HS mode. + * + * Minimum value: 8 UI + */ + unsigned int clk_pre; + + /** + * @clk_prepare: + * + * Time, in picoseconds, that the transmitter drives the Clock + * Lane LP-00 Line state immediately before the HS-0 Line + * state starting the HS transmission. + * + * Minimum value: 38000 ps + * Maximum value: 95000 ps + */ + unsigned int clk_prepare; + + /** + * @clk_settle: + * + * Time interval, in picoseconds, during which the HS receiver + * should ignore any Clock Lane HS transitions, starting from + * the beginning of @clk_prepare. + * + * Minimum value: 95000 ps + * Maximum value: 300000 ps + */ + unsigned int clk_settle; + + /** + * @clk_term_en: + * + * Time, in picoseconds, for the Clock Lane receiver to enable + * the HS line termination. + * + * Maximum value: 38000 ps + */ + unsigned int clk_term_en; + + /** + * @clk_trail: + * + * Time, in picoseconds, that the transmitter drives the HS-0 + * state after the last payload clock bit of a HS transmission + * burst. + * + * Minimum value: 60000 ps + */ + unsigned int clk_trail; + + /** + * @clk_zero: + * + * Time, in picoseconds, that the transmitter drives the HS-0 + * state prior to starting the Clock. + */ + unsigned int clk_zero; + + /** + * @d_term_en: + * + * Time, in picoseconds, for the Data Lane receiver to enable + * the HS line termination. + * + * Maximum value: 35000 ps + 4 * @hs_clk_rate period in ps + */ + unsigned int d_term_en; + + /** + * @eot: + * + * Transmitted time interval, in picoseconds, from the start + * of @hs_trail or @clk_trail, to the start of the LP- 11 + * state following a HS burst. + * + * Maximum value: 105000 ps + 12 * @hs_clk_rate period in ps + */ + unsigned int eot; + + /** + * @hs_exit: + * + * Time, in picoseconds, that the transmitter drives LP-11 + * following a HS burst. + * + * Minimum value: 100000 ps + */ + unsigned int hs_exit; + + /** + * @hs_prepare: + * + * Time, in picoseconds, that the transmitter drives the Data + * Lane LP-00 Line state immediately before the HS-0 Line + * state starting the HS transmission. + * + * Minimum value: 40000 ps + 4 * @hs_clk_rate period in ps + * Maximum value: 85000 ps + 6 * @hs_clk_rate period in ps + */ + unsigned int hs_prepare; + + /** + * @hs_settle: + * + * Time interval, in picoseconds, during which the HS receiver + * shall ignore any Data Lane HS transitions, starting from + * the beginning of @hs_prepare. + * + * Minimum value: 85000 ps + 6 * @hs_clk_rate period in ps + * Maximum value: 145000 ps + 10 * @hs_clk_rate period in ps + */ + unsigned int hs_settle; + + /** + * @hs_skip: + * + * Time interval, in picoseconds, during which the HS-RX + * should ignore any transitions on the Data Lane, following a + * HS burst. The end point of the interval is defined as the + * beginning of the LP-11 state following the HS burst. + * + * Minimum value: 40000 ps + * Maximum value: 55000 ps + 4 * @hs_clk_rate period in ps + */ + unsigned int hs_skip; + + /** + * @hs_trail: + * + * Time, in picoseconds, that the transmitter drives the + * flipped differential state after last payload data bit of a + * HS transmission burst + * + * Minimum value: max(8 * @hs_clk_rate period in ps, + * 60000 ps + 4 * @hs_clk_rate period in ps) + */ + unsigned int hs_trail; + + /** + * @hs_zero: + * + * Time, in picoseconds, that the transmitter drives the HS-0 + * state prior to transmitting the Sync sequence. + */ + unsigned int hs_zero; + + /** + * @init: + * + * Time, in picoseconds for the initialization period to + * complete. + * + * Minimum value: 100000000 ps + */ + unsigned int init; + + /** + * @lpx: + * + * Transmitted length, in picoseconds, of any Low-Power state + * period. + * + * Minimum value: 50000 ps + */ + unsigned int lpx; + + /** + * @ta_get: + * + * Time, in picoseconds, that the new transmitter drives the + * Bridge state (LP-00) after accepting control during a Link + * Turnaround. + * + * Value: 5 * @lpx + */ + unsigned int ta_get; + + /** + * @ta_go: + * + * Time, in picoseconds, that the transmitter drives the + * Bridge state (LP-00) before releasing control during a Link + * Turnaround. + * + * Value: 4 * @lpx + */ + unsigned int ta_go; + + /** + * @ta_sure: + * + * Time, in picoseconds, that the new transmitter waits after + * the LP-10 state before transmitting the Bridge state + * (LP-00) during a Link Turnaround. + * + * Minimum value: @lpx + * Maximum value: 2 * @lpx + */ + unsigned int ta_sure; + + /** + * @wakeup: + * + * Time, in picoseconds, that a transmitter drives a Mark-1 + * state prior to a Stop state in order to initiate an exit + * from ULPS. + * + * Minimum value: 1000000000 ps + */ + unsigned int wakeup; + + /** + * @hs_clk_rate: + * + * Clock rate, in Hertz, of the high-speed clock. + */ + unsigned long hs_clk_rate; + + /** + * @lp_clk_rate: + * + * Clock rate, in Hertz, of the low-power clock. + */ + unsigned long lp_clk_rate; + + /** + * @lanes: + * + * Number of active data lanes used for the transmissions. + */ + unsigned char lanes; +}; + +int phy_mipi_dphy_get_default_config(unsigned long pixel_clock, + unsigned int bpp, + unsigned int lanes, + struct phy_configure_opts_mipi_dphy *cfg); +int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg); + +#endif /* __PHY_MIPI_DPHY_H_ */ diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index 03b319f89a34..1fdefadf150a 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -20,6 +20,8 @@ #include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> +#include <linux/phy/phy-mipi-dphy.h> + struct phy; enum phy_mode { @@ -35,13 +37,21 @@ enum phy_mode { PHY_MODE_USB_DEVICE_HS, PHY_MODE_USB_DEVICE_SS, PHY_MODE_USB_OTG, - PHY_MODE_SGMII, - PHY_MODE_2500SGMII, - PHY_MODE_QSGMII, - PHY_MODE_10GKR, PHY_MODE_UFS_HS_A, PHY_MODE_UFS_HS_B, PHY_MODE_PCIE, + PHY_MODE_ETHERNET, + PHY_MODE_MIPI_DPHY, +}; + +/** + * union phy_configure_opts - Opaque generic phy configuration + * + * @mipi_dphy: Configuration set applicable for phys supporting + * the MIPI_DPHY phy mode. + */ +union phy_configure_opts { + struct phy_configure_opts_mipi_dphy mipi_dphy; }; /** @@ -60,7 +70,38 @@ struct phy_ops { int (*exit)(struct phy *phy); int (*power_on)(struct phy *phy); int (*power_off)(struct phy *phy); - int (*set_mode)(struct phy *phy, enum phy_mode mode); + int (*set_mode)(struct phy *phy, enum phy_mode mode, int submode); + + /** + * @configure: + * + * Optional. + * + * Used to change the PHY parameters. phy_init() must have + * been called on the phy. + * + * Returns: 0 if successful, an negative error code otherwise + */ + int (*configure)(struct phy *phy, union phy_configure_opts *opts); + + /** + * @validate: + * + * Optional. + * + * Used to check that the current set of parameters can be + * handled by the phy. Implementations are free to tune the + * parameters passed as arguments if needed by some + * implementation detail or constraints. It must not change + * any actual configuration of the PHY, so calling it as many + * times as deemed fit by the consumer must have no side + * effect. + * + * Returns: 0 if the configuration can be applied, an negative + * error code otherwise + */ + int (*validate)(struct phy *phy, enum phy_mode mode, int submode, + union phy_configure_opts *opts); int (*reset)(struct phy *phy); int (*calibrate)(struct phy *phy); struct module *owner; @@ -164,7 +205,13 @@ int phy_init(struct phy *phy); int phy_exit(struct phy *phy); int phy_power_on(struct phy *phy); int phy_power_off(struct phy *phy); -int phy_set_mode(struct phy *phy, enum phy_mode mode); +int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode); +#define phy_set_mode(phy, mode) \ + phy_set_mode_ext(phy, mode, 0) +int phy_configure(struct phy *phy, union phy_configure_opts *opts); +int phy_validate(struct phy *phy, enum phy_mode mode, int submode, + union phy_configure_opts *opts); + static inline enum phy_mode phy_get_mode(struct phy *phy) { return phy->attrs.mode; @@ -278,13 +325,17 @@ static inline int phy_power_off(struct phy *phy) return -ENOSYS; } -static inline int phy_set_mode(struct phy *phy, enum phy_mode mode) +static inline int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, + int submode) { if (!phy) return 0; return -ENOSYS; } +#define phy_set_mode(phy, mode) \ + phy_set_mode_ext(phy, mode, 0) + static inline enum phy_mode phy_get_mode(struct phy *phy) { return PHY_MODE_INVALID; @@ -304,6 +355,24 @@ static inline int phy_calibrate(struct phy *phy) return -ENOSYS; } +static inline int phy_configure(struct phy *phy, + union phy_configure_opts *opts) +{ + if (!phy) + return 0; + + return -ENOSYS; +} + +static inline int phy_validate(struct phy *phy, enum phy_mode mode, int submode, + union phy_configure_opts *opts) +{ + if (!phy) + return 0; + + return -ENOSYS; +} + static inline int phy_get_bus_width(struct phy *phy) { return -ENOSYS; diff --git a/include/linux/usb/ccid.h b/include/linux/usb/ccid.h new file mode 100644 index 000000000000..3431446d6864 --- /dev/null +++ b/include/linux/usb/ccid.h @@ -0,0 +1,51 @@ +/* + * Copyright (c) 2018 Vincent Pelletier + */ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __CCID_H +#define __CCID_H + +#include <linux/types.h> + +#define USB_INTERFACE_CLASS_CCID 0x0b + +struct ccid_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __le16 bcdCCID; + __u8 bMaxSlotIndex; + __u8 bVoltageSupport; + __le32 dwProtocols; + __le32 dwDefaultClock; + __le32 dwMaximumClock; + __u8 bNumClockSupported; + __le32 dwDataRate; + __le32 dwMaxDataRate; + __u8 bNumDataRatesSupported; + __le32 dwMaxIFSD; + __le32 dwSynchProtocols; + __le32 dwMechanical; + __le32 dwFeatures; + __le32 dwMaxCCIDMessageLength; + __u8 bClassGetResponse; + __u8 bClassEnvelope; + __le16 wLcdLayout; + __u8 bPINSupport; + __u8 bMaxCCIDBusySlots; +} __attribute__ ((packed)); + +#endif /* __CCID_H */ diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 63758c399e4e..911e05af671e 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -60,9 +60,12 @@ struct ci_hdrc_platform_data { #define CI_HDRC_OVERRIDE_RX_BURST BIT(11) #define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12) /* Glue layer manages phy */ #define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13) +#define CI_HDRC_IMX_IS_HSIC BIT(14) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 +#define CI_HDRC_IMX_HSIC_ACTIVE_EVENT 2 +#define CI_HDRC_IMX_HSIC_SUSPEND_EVENT 3 int (*notify_event) (struct ci_hdrc *ci, unsigned event); struct regulator *reg_vbus; struct usb_otg_caps ci_otg_caps; diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index e5cd84a0f84a..7595056b96c1 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -61,6 +61,8 @@ struct usb_ep; * invalidated by the error may first be dequeued. * @context: For use by the completion callback * @list: For use by the gadget driver. + * @frame_number: Reports the interval number in (micro)frame in which the + * isochronous transfer was transmitted or received. * @status: Reports completion code, zero or a negative errno. * Normally, faults block the transfer queue from advancing until * the completion callback returns. @@ -112,6 +114,8 @@ struct usb_request { void *context; struct list_head list; + unsigned frame_number; /* ISO ONLY */ + int status; unsigned actual; }; diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 97e2ddec18b1..7dc3a411bece 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -235,11 +235,6 @@ static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus) return container_of(bus, struct usb_hcd, self); } -struct hcd_timeout { /* timeouts we allocate */ - struct list_head timeout_list; - struct timer_list timer; -}; - /*-------------------------------------------------------------------------*/ diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h index 7e7fbfb84e8e..50c74a77db55 100644 --- a/include/linux/usb/tcpm.h +++ b/include/linux/usb/tcpm.h @@ -89,6 +89,7 @@ struct tcpc_config { enum typec_port_data data; enum typec_role default_role; bool try_role_hw; /* try.{src,snk} implemented in hardware */ + bool self_powered; /* port belongs to a self powered device */ const struct typec_altmode_desc *alt_modes; }; |