diff options
70 files changed, 4531 insertions, 966 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom new file mode 100644 index 000000000000..82d4df136444 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-wacom @@ -0,0 +1,72 @@ +What: /sys/class/hidraw/hidraw*/device/speed +Date: April 2010 +Kernel Version: 2.6.35 +Contact: linux-bluetooth@vger.kernel.org +Description: + The /sys/class/hidraw/hidraw*/device/speed file controls + reporting speed of Wacom bluetooth tablet. Reading from + this file returns 1 if tablet reports in high speed mode + or 0 otherwise. Writing to this file one of these values + switches reporting speed. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/led +Date: August 2011 +Contact: linux-input@vger.kernel.org +Description: + Attribute group for control of the status LEDs and the OLEDs. + This attribute group is only available for Intuos 4 M, L, + and XL (with LEDs and OLEDs) and Cintiq 21UX2 (LEDs only). + Therefore its presence implicitly signifies the presence of + said LEDs and OLEDs on the tablet device. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance +Date: August 2011 +Contact: linux-input@vger.kernel.org +Description: + Writing to this file sets the status LED luminance (1..127) + when the stylus does not touch the tablet surface, and no + button is pressed on the stylus. This luminance level is + normally lower than the level when a button is pressed. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status1_luminance +Date: August 2011 +Contact: linux-input@vger.kernel.org +Description: + Writing to this file sets the status LED luminance (1..127) + when the stylus touches the tablet surface, or any button is + pressed on the stylus. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0_select +Date: August 2011 +Contact: linux-input@vger.kernel.org +Description: + Writing to this file sets which one of the four (for Intuos 4) + or of the right four (for Cintiq 21UX2) status LEDs is active (0..3). + The other three LEDs on the same side are always inactive. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select +Date: September 2011 +Contact: linux-input@vger.kernel.org +Description: + Writing to this file sets which one of the left four (for Cintiq 21UX2) + status LEDs is active (0..3). The other three LEDs on the left are always + inactive. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance +Date: August 2011 +Contact: linux-input@vger.kernel.org +Description: + Writing to this file sets the overall luminance level (0..15) + of all eight button OLED displays. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/button<n>_rawimg +Date: August 2011 +Contact: linux-input@vger.kernel.org +Description: + When writing a 1024 byte raw image in Wacom Intuos 4 + interleaving format to the file, the image shows up on Button N + of the device. The image is a 64x32 pixel 4-bit gray image. The + 1024 byte binary is split up into 16x 64 byte chunks. Each 64 + byte chunk encodes the image data for two consecutive lines on + the display. The low nibble of each byte contains the first + line, and the high nibble contains the second line. diff --git a/Documentation/ABI/testing/sysfs-wacom b/Documentation/ABI/testing/sysfs-wacom deleted file mode 100644 index 1517976e25c4..000000000000 --- a/Documentation/ABI/testing/sysfs-wacom +++ /dev/null @@ -1,10 +0,0 @@ -What: /sys/class/hidraw/hidraw*/device/speed -Date: April 2010 -Kernel Version: 2.6.35 -Contact: linux-bluetooth@vger.kernel.org -Description: - The /sys/class/hidraw/hidraw*/device/speed file controls - reporting speed of wacom bluetooth tablet. Reading from - this file returns 1 if tablet reports in high speed mode - or 0 otherwise. Writing to this file one of these values - switches reporting speed. diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt index db798af5ef98..5602eb71ad5d 100644 --- a/Documentation/input/elantech.txt +++ b/Documentation/input/elantech.txt @@ -16,15 +16,28 @@ Contents 1. Introduction 2. Extra knobs - 3. Hardware version 1 - 3.1 Registers - 3.2 Native relative mode 4 byte packet format - 3.3 Native absolute mode 4 byte packet format - 4. Hardware version 2 + 3. Differentiating hardware versions + 4. Hardware version 1 4.1 Registers - 4.2 Native absolute mode 6 byte packet format - 4.2.1 One finger touch - 4.2.2 Two finger touch + 4.2 Native relative mode 4 byte packet format + 4.3 Native absolute mode 4 byte packet format + 5. Hardware version 2 + 5.1 Registers + 5.2 Native absolute mode 6 byte packet format + 5.2.1 Parity checking and packet re-synchronization + 5.2.2 One/Three finger touch + 5.2.3 Two finger touch + 6. Hardware version 3 + 6.1 Registers + 6.2 Native absolute mode 6 byte packet format + 6.2.1 One/Three finger touch + 6.2.2 Two finger touch + 7. Hardware version 4 + 7.1 Registers + 7.2 Native absolute mode 6 byte packet format + 7.2.1 Status packet + 7.2.2 Head packet + 7.2.3 Motion packet @@ -375,7 +388,7 @@ For all the other ones, there are just a few constant bits: In case an error is detected, all the packets are shifted by one (and packet[0] is discarded). -5.2.1 One/Three finger touch +5.2.2 One/Three finger touch ~~~~~~~~~~~~~~~~ byte 0: @@ -384,19 +397,19 @@ byte 0: n1 n0 w3 w2 . . R L L, R = 1 when Left, Right mouse button pressed - n1..n0 = numbers of fingers on touchpad + n1..n0 = number of fingers on touchpad byte 1: bit 7 6 5 4 3 2 1 0 - p7 p6 p5 p4 . x10 x9 x8 + p7 p6 p5 p4 x11 x10 x9 x8 byte 2: bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x3 x2 x1 x0 - x10..x0 = absolute x value (horizontal) + x11..x0 = absolute x value (horizontal) byte 3: @@ -420,7 +433,7 @@ byte 3: byte 4: bit 7 6 5 4 3 2 1 0 - p3 p1 p2 p0 . . y9 y8 + p3 p1 p2 p0 y11 y10 y9 y8 p7..p0 = pressure (not EF113) @@ -429,10 +442,10 @@ byte 5: bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 - y9..y0 = absolute y value (vertical) + y11..y0 = absolute y value (vertical) -4.2.2 Two finger touch +5.2.3 Two finger touch ~~~~~~~~~~~~~~~~ Note that the two pairs of coordinates are not exactly the coordinates of the @@ -446,7 +459,7 @@ byte 0: n1 n0 ay8 ax8 . . R L L, R = 1 when Left, Right mouse button pressed - n1..n0 = numbers of fingers on touchpad + n1..n0 = number of fingers on touchpad byte 1: @@ -480,3 +493,253 @@ byte 5: by7 by8 by5 by4 by3 by2 by1 by0 by8..by0 = upper-right finger absolute y value + +///////////////////////////////////////////////////////////////////////////// + +6. Hardware version 3 + ================== + +6.1 Registers + ~~~~~~~~~ +* reg_10 + + bit 7 6 5 4 3 2 1 0 + 0 0 0 0 0 0 0 A + + A: 1 = enable absolute tracking + +6.2 Native absolute mode 6 byte packet format + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +1 and 3 finger touch shares the same 6-byte packet format, except that +3 finger touch only reports the position of the center of all three fingers. + +Firmware would send 12 bytes of data for 2 finger touch. + +Note on debounce: +In case the box has unstable power supply or other electricity issues, or +when number of finger changes, F/W would send "debounce packet" to inform +driver that the hardware is in debounce status. +The debouce packet has the following signature: + byte 0: 0xc4 + byte 1: 0xff + byte 2: 0xff + byte 3: 0x02 + byte 4: 0xff + byte 5: 0xff +When we encounter this kind of packet, we just ignore it. + +6.2.1 One/Three finger touch + ~~~~~~~~~~~~~~~~~~~~~~ + +byte 0: + + bit 7 6 5 4 3 2 1 0 + n1 n0 w3 w2 0 1 R L + + L, R = 1 when Left, Right mouse button pressed + n1..n0 = number of fingers on touchpad + +byte 1: + + bit 7 6 5 4 3 2 1 0 + p7 p6 p5 p4 x11 x10 x9 x8 + +byte 2: + + bit 7 6 5 4 3 2 1 0 + x7 x6 x5 x4 x3 x2 x1 x0 + + x11..x0 = absolute x value (horizontal) + +byte 3: + + bit 7 6 5 4 3 2 1 0 + 0 0 w1 w0 0 0 1 0 + + w3..w0 = width of the finger touch + +byte 4: + + bit 7 6 5 4 3 2 1 0 + p3 p1 p2 p0 y11 y10 y9 y8 + + p7..p0 = pressure + +byte 5: + + bit 7 6 5 4 3 2 1 0 + y7 y6 y5 y4 y3 y2 y1 y0 + + y11..y0 = absolute y value (vertical) + +6.2.2 Two finger touch + ~~~~~~~~~~~~~~~~ + +The packet format is exactly the same for two finger touch, except the hardware +sends two 6 byte packets. The first packet contains data for the first finger, +the second packet has data for the second finger. So for two finger touch a +total of 12 bytes are sent. + +///////////////////////////////////////////////////////////////////////////// + +7. Hardware version 4 + ================== + +7.1 Registers + ~~~~~~~~~ +* reg_07 + + bit 7 6 5 4 3 2 1 0 + 0 0 0 0 0 0 0 A + + A: 1 = enable absolute tracking + +7.2 Native absolute mode 6 byte packet format + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +v4 hardware is a true multitouch touchpad, capable of tracking up to 5 fingers. +Unfortunately, due to PS/2's limited bandwidth, its packet format is rather +complex. + +Whenever the numbers or identities of the fingers changes, the hardware sends a +status packet to indicate how many and which fingers is on touchpad, followed by +head packets or motion packets. A head packet contains data of finger id, finger +position (absolute x, y values), width, and pressure. A motion packet contains +two fingers' position delta. + +For example, when status packet tells there are 2 fingers on touchpad, then we +can expect two following head packets. If the finger status doesn't change, +the following packets would be motion packets, only sending delta of finger +position, until we receive a status packet. + +One exception is one finger touch. when a status packet tells us there is only +one finger, the hardware would just send head packets afterwards. + +7.2.1 Status packet + ~~~~~~~~~~~~~ + +byte 0: + + bit 7 6 5 4 3 2 1 0 + . . . . 0 1 R L + + L, R = 1 when Left, Right mouse button pressed + +byte 1: + + bit 7 6 5 4 3 2 1 0 + . . . ft4 ft3 ft2 ft1 ft0 + + ft4 ft3 ft2 ft1 ft0 ftn = 1 when finger n is on touchpad + +byte 2: not used + +byte 3: + + bit 7 6 5 4 3 2 1 0 + . . . 1 0 0 0 0 + + constant bits + +byte 4: + + bit 7 6 5 4 3 2 1 0 + p . . . . . . . + + p = 1 for palm + +byte 5: not used + +7.2.2 Head packet + ~~~~~~~~~~~ + +byte 0: + + bit 7 6 5 4 3 2 1 0 + w3 w2 w1 w0 0 1 R L + + L, R = 1 when Left, Right mouse button pressed + w3..w0 = finger width (spans how many trace lines) + +byte 1: + + bit 7 6 5 4 3 2 1 0 + p7 p6 p5 p4 x11 x10 x9 x8 + +byte 2: + + bit 7 6 5 4 3 2 1 0 + x7 x6 x5 x4 x3 x2 x1 x0 + + x11..x0 = absolute x value (horizontal) + +byte 3: + + bit 7 6 5 4 3 2 1 0 + id2 id1 id0 1 0 0 0 1 + + id2..id0 = finger id + +byte 4: + + bit 7 6 5 4 3 2 1 0 + p3 p1 p2 p0 y11 y10 y9 y8 + + p7..p0 = pressure + +byte 5: + + bit 7 6 5 4 3 2 1 0 + y7 y6 y5 y4 y3 y2 y1 y0 + + y11..y0 = absolute y value (vertical) + +7.2.3 Motion packet + ~~~~~~~~~~~~~ + +byte 0: + + bit 7 6 5 4 3 2 1 0 + id2 id1 id0 w 0 1 R L + + L, R = 1 when Left, Right mouse button pressed + id2..id0 = finger id + w = 1 when delta overflows (> 127 or < -128), in this case + firmware sends us (delta x / 5) and (delta y / 5) + +byte 1: + + bit 7 6 5 4 3 2 1 0 + x7 x6 x5 x4 x3 x2 x1 x0 + + x7..x0 = delta x (two's complement) + +byte 2: + + bit 7 6 5 4 3 2 1 0 + y7 y6 y5 y4 y3 y2 y1 y0 + + y7..y0 = delta y (two's complement) + +byte 3: + + bit 7 6 5 4 3 2 1 0 + id2 id1 id0 1 0 0 1 0 + + id2..id0 = finger id + +byte 4: + + bit 7 6 5 4 3 2 1 0 + x7 x6 x5 x4 x3 x2 x1 x0 + + x7..x0 = delta x (two's complement) + +byte 5: + + bit 7 6 5 4 3 2 1 0 + y7 y6 y5 y4 y3 y2 y1 y0 + + y7..y0 = delta y (two's complement) + + byte 0 ~ 2 for one finger + byte 3 ~ 5 for another diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index 71536e78406f..543101c5bf26 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -65,6 +65,20 @@ the full state of each initiated contact has to reside in the receiving end. Upon receiving an MT event, one simply updates the appropriate attribute of the current slot. +Some devices identify and/or track more contacts than they can report to the +driver. A driver for such a device should associate one type B slot with each +contact that is reported by the hardware. Whenever the identity of the +contact associated with a slot changes, the driver should invalidate that +slot by changing its ABS_MT_TRACKING_ID. If the hardware signals that it is +tracking more contacts than it is currently reporting, the driver should use +a BTN_TOOL_*TAP event to inform userspace of the total number of contacts +being tracked by the hardware at that moment. The driver should do this by +explicitly sending the corresponding BTN_TOOL_*TAP event and setting +use_count to false when calling input_mt_report_pointer_emulation(). +The driver should only advertise as many slots as the hardware can report. +Userspace can detect that a driver can report more total contacts than slots +by noting that the largest supported BTN_TOOL_*TAP event is larger than the +total number of type B slots reported in the absinfo for the ABS_MT_SLOT axis. Protocol Example A ------------------ diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index 3367f760d75a..480eb9d9876a 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -309,9 +309,10 @@ EXPORT_SYMBOL_GPL(input_ff_event); * Once ff device is created you need to setup its upload, erase, * playback and other handlers before registering input device */ -int input_ff_create(struct input_dev *dev, int max_effects) +int input_ff_create(struct input_dev *dev, unsigned int max_effects) { struct ff_device *ff; + size_t ff_dev_size; int i; if (!max_effects) { @@ -319,8 +320,12 @@ int input_ff_create(struct input_dev *dev, int max_effects) return -EINVAL; } - ff = kzalloc(sizeof(struct ff_device) + - max_effects * sizeof(struct file *), GFP_KERNEL); + ff_dev_size = sizeof(struct ff_device) + + max_effects * sizeof(struct file *); + if (ff_dev_size < max_effects) /* overflow */ + return -EINVAL; + + ff = kzalloc(ff_dev_size, GFP_KERNEL); if (!ff) return -ENOMEM; diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index c48c81f0308d..9150ee78e00a 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -117,6 +117,7 @@ void input_mt_report_finger_count(struct input_dev *dev, int count) input_event(dev, EV_KEY, BTN_TOOL_DOUBLETAP, count == 2); input_event(dev, EV_KEY, BTN_TOOL_TRIPLETAP, count == 3); input_event(dev, EV_KEY, BTN_TOOL_QUADTAP, count == 4); + input_event(dev, EV_KEY, BTN_TOOL_QUINTTAP, count == 5); } EXPORT_SYMBOL(input_mt_report_finger_count); diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c index b1aabde87523..b253973881b8 100644 --- a/drivers/input/input-polldev.c +++ b/drivers/input/input-polldev.c @@ -49,8 +49,10 @@ static int input_open_polled_device(struct input_dev *input) dev->open(dev); /* Only start polling if polling is enabled */ - if (dev->poll_interval > 0) - queue_delayed_work(system_freezable_wq, &dev->work, 0); + if (dev->poll_interval > 0) { + dev->poll(dev); + input_polldev_queue_work(dev); + } return 0; } diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b4dee9d5a055..615c21f2a553 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -33,10 +33,10 @@ config KEYBOARD_ADP5588 module will be called adp5588-keys. config KEYBOARD_ADP5589 - tristate "ADP5589 I2C QWERTY Keypad and IO Expander" + tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander" depends on I2C help - Say Y here if you want to use a ADP5589 attached to your + Say Y here if you want to use a ADP5585/ADP5589 attached to your system I2C bus. To compile this driver as a module, choose M here: the diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index e34eeb8ae371..4a7f534cf64b 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -550,7 +550,7 @@ static int __devinit adp5588_probe(struct i2c_client *client, } error = request_irq(client->irq, adp5588_irq, - IRQF_TRIGGER_FALLING | IRQF_DISABLED, + IRQF_TRIGGER_FALLING, client->dev.driver->name, kpad); if (error) { dev_err(&client->dev, "irq %d busy?\n", client->irq); diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c index c7708263051b..02b5d53031bf 100644 --- a/drivers/input/keyboard/adp5589-keys.c +++ b/drivers/input/keyboard/adp5589-keys.c @@ -1,5 +1,5 @@ /* - * Description: keypad driver for ADP5589 + * Description: keypad driver for ADP5589, ADP5585 * I2C QWERTY Keypad and IO Expander * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -22,35 +22,165 @@ #include <linux/input/adp5589.h> +/* ADP5589/ADP5585 Common Registers */ +#define ADP5589_5_ID 0x00 +#define ADP5589_5_INT_STATUS 0x01 +#define ADP5589_5_STATUS 0x02 +#define ADP5589_5_FIFO_1 0x03 +#define ADP5589_5_FIFO_2 0x04 +#define ADP5589_5_FIFO_3 0x05 +#define ADP5589_5_FIFO_4 0x06 +#define ADP5589_5_FIFO_5 0x07 +#define ADP5589_5_FIFO_6 0x08 +#define ADP5589_5_FIFO_7 0x09 +#define ADP5589_5_FIFO_8 0x0A +#define ADP5589_5_FIFO_9 0x0B +#define ADP5589_5_FIFO_10 0x0C +#define ADP5589_5_FIFO_11 0x0D +#define ADP5589_5_FIFO_12 0x0E +#define ADP5589_5_FIFO_13 0x0F +#define ADP5589_5_FIFO_14 0x10 +#define ADP5589_5_FIFO_15 0x11 +#define ADP5589_5_FIFO_16 0x12 +#define ADP5589_5_GPI_INT_STAT_A 0x13 +#define ADP5589_5_GPI_INT_STAT_B 0x14 + +/* ADP5589 Registers */ +#define ADP5589_GPI_INT_STAT_C 0x15 +#define ADP5589_GPI_STATUS_A 0x16 +#define ADP5589_GPI_STATUS_B 0x17 +#define ADP5589_GPI_STATUS_C 0x18 +#define ADP5589_RPULL_CONFIG_A 0x19 +#define ADP5589_RPULL_CONFIG_B 0x1A +#define ADP5589_RPULL_CONFIG_C 0x1B +#define ADP5589_RPULL_CONFIG_D 0x1C +#define ADP5589_RPULL_CONFIG_E 0x1D +#define ADP5589_GPI_INT_LEVEL_A 0x1E +#define ADP5589_GPI_INT_LEVEL_B 0x1F +#define ADP5589_GPI_INT_LEVEL_C 0x20 +#define ADP5589_GPI_EVENT_EN_A 0x21 +#define ADP5589_GPI_EVENT_EN_B 0x22 +#define ADP5589_GPI_EVENT_EN_C 0x23 +#define ADP5589_GPI_INTERRUPT_EN_A 0x24 +#define ADP5589_GPI_INTERRUPT_EN_B 0x25 +#define ADP5589_GPI_INTERRUPT_EN_C 0x26 +#define ADP5589_DEBOUNCE_DIS_A 0x27 +#define ADP5589_DEBOUNCE_DIS_B 0x28 +#define ADP5589_DEBOUNCE_DIS_C 0x29 +#define ADP5589_GPO_DATA_OUT_A 0x2A +#define ADP5589_GPO_DATA_OUT_B 0x2B +#define ADP5589_GPO_DATA_OUT_C 0x2C +#define ADP5589_GPO_OUT_MODE_A 0x2D +#define ADP5589_GPO_OUT_MODE_B 0x2E +#define ADP5589_GPO_OUT_MODE_C 0x2F +#define ADP5589_GPIO_DIRECTION_A 0x30 +#define ADP5589_GPIO_DIRECTION_B 0x31 +#define ADP5589_GPIO_DIRECTION_C 0x32 +#define ADP5589_UNLOCK1 0x33 +#define ADP5589_UNLOCK2 0x34 +#define ADP5589_EXT_LOCK_EVENT 0x35 +#define ADP5589_UNLOCK_TIMERS 0x36 +#define ADP5589_LOCK_CFG 0x37 +#define ADP5589_RESET1_EVENT_A 0x38 +#define ADP5589_RESET1_EVENT_B 0x39 +#define ADP5589_RESET1_EVENT_C 0x3A +#define ADP5589_RESET2_EVENT_A 0x3B +#define ADP5589_RESET2_EVENT_B 0x3C +#define ADP5589_RESET_CFG 0x3D +#define ADP5589_PWM_OFFT_LOW 0x3E +#define ADP5589_PWM_OFFT_HIGH 0x3F +#define ADP5589_PWM_ONT_LOW 0x40 +#define ADP5589_PWM_ONT_HIGH 0x41 +#define ADP5589_PWM_CFG 0x42 +#define ADP5589_CLOCK_DIV_CFG 0x43 +#define ADP5589_LOGIC_1_CFG 0x44 +#define ADP5589_LOGIC_2_CFG 0x45 +#define ADP5589_LOGIC_FF_CFG 0x46 +#define ADP5589_LOGIC_INT_EVENT_EN 0x47 +#define ADP5589_POLL_PTIME_CFG 0x48 +#define ADP5589_PIN_CONFIG_A 0x49 +#define ADP5589_PIN_CONFIG_B 0x4A +#define ADP5589_PIN_CONFIG_C 0x4B +#define ADP5589_PIN_CONFIG_D 0x4C +#define ADP5589_GENERAL_CFG 0x4D +#define ADP5589_INT_EN 0x4E + +/* ADP5585 Registers */ +#define ADP5585_GPI_STATUS_A 0x15 +#define ADP5585_GPI_STATUS_B 0x16 +#define ADP5585_RPULL_CONFIG_A 0x17 +#define ADP5585_RPULL_CONFIG_B 0x18 +#define ADP5585_RPULL_CONFIG_C 0x19 +#define ADP5585_RPULL_CONFIG_D 0x1A +#define ADP5585_GPI_INT_LEVEL_A 0x1B +#define ADP5585_GPI_INT_LEVEL_B 0x1C +#define ADP5585_GPI_EVENT_EN_A 0x1D +#define ADP5585_GPI_EVENT_EN_B 0x1E +#define ADP5585_GPI_INTERRUPT_EN_A 0x1F +#define ADP5585_GPI_INTERRUPT_EN_B 0x20 +#define ADP5585_DEBOUNCE_DIS_A 0x21 +#define ADP5585_DEBOUNCE_DIS_B 0x22 +#define ADP5585_GPO_DATA_OUT_A 0x23 +#define ADP5585_GPO_DATA_OUT_B 0x24 +#define ADP5585_GPO_OUT_MODE_A 0x25 +#define ADP5585_GPO_OUT_MODE_B 0x26 +#define ADP5585_GPIO_DIRECTION_A 0x27 +#define ADP5585_GPIO_DIRECTION_B 0x28 +#define ADP5585_RESET1_EVENT_A 0x29 +#define ADP5585_RESET1_EVENT_B 0x2A +#define ADP5585_RESET1_EVENT_C 0x2B +#define ADP5585_RESET2_EVENT_A 0x2C +#define ADP5585_RESET2_EVENT_B 0x2D +#define ADP5585_RESET_CFG 0x2E +#define ADP5585_PWM_OFFT_LOW 0x2F +#define ADP5585_PWM_OFFT_HIGH 0x30 +#define ADP5585_PWM_ONT_LOW 0x31 +#define ADP5585_PWM_ONT_HIGH 0x32 +#define ADP5585_PWM_CFG 0x33 +#define ADP5585_LOGIC_CFG 0x34 +#define ADP5585_LOGIC_FF_CFG 0x35 +#define ADP5585_LOGIC_INT_EVENT_EN 0x36 +#define ADP5585_POLL_PTIME_CFG 0x37 +#define ADP5585_PIN_CONFIG_A 0x38 +#define ADP5585_PIN_CONFIG_B 0x39 +#define ADP5585_PIN_CONFIG_D 0x3A +#define ADP5585_GENERAL_CFG 0x3B +#define ADP5585_INT_EN 0x3C + +/* ID Register */ +#define ADP5589_5_DEVICE_ID_MASK 0xF +#define ADP5589_5_MAN_ID_MASK 0xF +#define ADP5589_5_MAN_ID_SHIFT 4 +#define ADP5589_5_MAN_ID 0x02 + /* GENERAL_CFG Register */ #define OSC_EN (1 << 7) #define CORE_CLK(x) (((x) & 0x3) << 5) -#define LCK_TRK_LOGIC (1 << 4) -#define LCK_TRK_GPI (1 << 3) +#define LCK_TRK_LOGIC (1 << 4) /* ADP5589 only */ +#define LCK_TRK_GPI (1 << 3) /* ADP5589 only */ #define INT_CFG (1 << 1) #define RST_CFG (1 << 0) /* INT_EN Register */ -#define LOGIC2_IEN (1 << 5) +#define LOGIC2_IEN (1 << 5) /* ADP5589 only */ #define LOGIC1_IEN (1 << 4) -#define LOCK_IEN (1 << 3) +#define LOCK_IEN (1 << 3) /* ADP5589 only */ #define OVRFLOW_IEN (1 << 2) #define GPI_IEN (1 << 1) #define EVENT_IEN (1 << 0) /* Interrupt Status Register */ -#define LOGIC2_INT (1 << 5) +#define LOGIC2_INT (1 << 5) /* ADP5589 only */ #define LOGIC1_INT (1 << 4) -#define LOCK_INT (1 << 3) +#define LOCK_INT (1 << 3) /* ADP5589 only */ #define OVRFLOW_INT (1 << 2) #define GPI_INT (1 << 1) #define EVENT_INT (1 << 0) /* STATUS Register */ - -#define LOGIC2_STAT (1 << 7) +#define LOGIC2_STAT (1 << 7) /* ADP5589 only */ #define LOGIC1_STAT (1 << 6) -#define LOCK_STAT (1 << 5) +#define LOCK_STAT (1 << 5) /* ADP5589 only */ #define KEC 0xF /* PIN_CONFIG_D Register */ @@ -61,27 +191,54 @@ #define LOCK_EN (1 << 0) #define PTIME_MASK 0x3 -#define LTIME_MASK 0x3 +#define LTIME_MASK 0x3 /* ADP5589 only */ /* Key Event Register xy */ #define KEY_EV_PRESSED (1 << 7) #define KEY_EV_MASK (0x7F) #define KEYP_MAX_EVENT 16 +#define ADP5589_MAXGPIO 19 +#define ADP5585_MAXGPIO 11 /* 10 on the ADP5585-01, 11 on ADP5585-02 */ -#define MAXGPIO 19 -#define ADP_BANK(offs) ((offs) >> 3) -#define ADP_BIT(offs) (1u << ((offs) & 0x7)) +enum { + ADP5589, + ADP5585_01, + ADP5585_02 +}; + +struct adp_constants { + u8 maxgpio; + u8 keymapsize; + u8 gpi_pin_row_base; + u8 gpi_pin_row_end; + u8 gpi_pin_col_base; + u8 gpi_pin_base; + u8 gpi_pin_end; + u8 gpimapsize_max; + u8 max_row_num; + u8 max_col_num; + u8 row_mask; + u8 col_mask; + u8 col_shift; + u8 c4_extend_cfg; + u8 (*bank) (u8 offset); + u8 (*bit) (u8 offset); + u8 (*reg) (u8 reg); +}; struct adp5589_kpad { struct i2c_client *client; struct input_dev *input; + const struct adp_constants *var; unsigned short keycode[ADP5589_KEYMAPSIZE]; const struct adp5589_gpi_map *gpimap; unsigned short gpimapsize; unsigned extend_cfg; + bool is_adp5585; + bool adp5585_support_row5; #ifdef CONFIG_GPIOLIB - unsigned char gpiomap[MAXGPIO]; + unsigned char gpiomap[ADP5589_MAXGPIO]; bool export_gpio; struct gpio_chip gc; struct mutex gpio_lock; /* Protect cached dir, dat_out */ @@ -90,6 +247,129 @@ struct adp5589_kpad { #endif }; +/* + * ADP5589 / ADP5585 derivative / variant handling + */ + + +/* ADP5589 */ + +static unsigned char adp5589_bank(unsigned char offset) +{ + return offset >> 3; +} + +static unsigned char adp5589_bit(unsigned char offset) +{ + return 1u << (offset & 0x7); +} + +static unsigned char adp5589_reg(unsigned char reg) +{ + return reg; +} + +static const struct adp_constants const_adp5589 = { + .maxgpio = ADP5589_MAXGPIO, + .keymapsize = ADP5589_KEYMAPSIZE, + .gpi_pin_row_base = ADP5589_GPI_PIN_ROW_BASE, + .gpi_pin_row_end = ADP5589_GPI_PIN_ROW_END, + .gpi_pin_col_base = ADP5589_GPI_PIN_COL_BASE, + .gpi_pin_base = ADP5589_GPI_PIN_BASE, + .gpi_pin_end = ADP5589_GPI_PIN_END, + .gpimapsize_max = ADP5589_GPIMAPSIZE_MAX, + .c4_extend_cfg = 12, + .max_row_num = ADP5589_MAX_ROW_NUM, + .max_col_num = ADP5589_MAX_COL_NUM, + .row_mask = ADP5589_ROW_MASK, + .col_mask = ADP5589_COL_MASK, + .col_shift = ADP5589_COL_SHIFT, + .bank = adp5589_bank, + .bit = adp5589_bit, + .reg = adp5589_reg, +}; + +/* ADP5585 */ + +static unsigned char adp5585_bank(unsigned char offset) +{ + return offset > ADP5585_MAX_ROW_NUM; +} + +static unsigned char adp5585_bit(unsigned char offset) +{ + return (offset > ADP5585_MAX_ROW_NUM) ? + 1u << (offset - ADP5585_COL_SHIFT) : 1u << offset; +} + +static const unsigned char adp5585_reg_lut[] = { + [ADP5589_GPI_STATUS_A] = ADP5585_GPI_STATUS_A, + [ADP5589_GPI_STATUS_B] = ADP5585_GPI_STATUS_B, + [ADP5589_RPULL_CONFIG_A] = ADP5585_RPULL_CONFIG_A, + [ADP5589_RPULL_CONFIG_B] = ADP5585_RPULL_CONFIG_B, + [ADP5589_RPULL_CONFIG_C] = ADP5585_RPULL_CONFIG_C, + [ADP5589_RPULL_CONFIG_D] = ADP5585_RPULL_CONFIG_D, + [ADP5589_GPI_INT_LEVEL_A] = ADP5585_GPI_INT_LEVEL_A, + [ADP5589_GPI_INT_LEVEL_B] = ADP5585_GPI_INT_LEVEL_B, + [ADP5589_GPI_EVENT_EN_A] = ADP5585_GPI_EVENT_EN_A, + [ADP5589_GPI_EVENT_EN_B] = ADP5585_GPI_EVENT_EN_B, + [ADP5589_GPI_INTERRUPT_EN_A] = ADP5585_GPI_INTERRUPT_EN_A, + [ADP5589_GPI_INTERRUPT_EN_B] = ADP5585_GPI_INTERRUPT_EN_B, + [ADP5589_DEBOUNCE_DIS_A] = ADP5585_DEBOUNCE_DIS_A, + [ADP5589_DEBOUNCE_DIS_B] = ADP5585_DEBOUNCE_DIS_B, + [ADP5589_GPO_DATA_OUT_A] = ADP5585_GPO_DATA_OUT_A, + [ADP5589_GPO_DATA_OUT_B] = ADP5585_GPO_DATA_OUT_B, + [ADP5589_GPO_OUT_MODE_A] = ADP5585_GPO_OUT_MODE_A, + [ADP5589_GPO_OUT_MODE_B] = ADP5585_GPO_OUT_MODE_B, + [ADP5589_GPIO_DIRECTION_A] = ADP5585_GPIO_DIRECTION_A, + [ADP5589_GPIO_DIRECTION_B] = ADP5585_GPIO_DIRECTION_B, + [ADP5589_RESET1_EVENT_A] = ADP5585_RESET1_EVENT_A, + [ADP5589_RESET1_EVENT_B] = ADP5585_RESET1_EVENT_B, + [ADP5589_RESET1_EVENT_C] = ADP5585_RESET1_EVENT_C, + [ADP5589_RESET2_EVENT_A] = ADP5585_RESET2_EVENT_A, + [ADP5589_RESET2_EVENT_B] = ADP5585_RESET2_EVENT_B, + [ADP5589_RESET_CFG] = ADP5585_RESET_CFG, + [ADP5589_PWM_OFFT_LOW] = ADP5585_PWM_OFFT_LOW, + [ADP5589_PWM_OFFT_HIGH] = ADP5585_PWM_OFFT_HIGH, + [ADP5589_PWM_ONT_LOW] = ADP5585_PWM_ONT_LOW, + [ADP5589_PWM_ONT_HIGH] = ADP5585_PWM_ONT_HIGH, + [ADP5589_PWM_CFG] = ADP5585_PWM_CFG, + [ADP5589_LOGIC_1_CFG] = ADP5585_LOGIC_CFG, + [ADP5589_LOGIC_FF_CFG] = ADP5585_LOGIC_FF_CFG, + [ADP5589_LOGIC_INT_EVENT_EN] = ADP5585_LOGIC_INT_EVENT_EN, + [ADP5589_POLL_PTIME_CFG] = ADP5585_POLL_PTIME_CFG, + [ADP5589_PIN_CONFIG_A] = ADP5585_PIN_CONFIG_A, + [ADP5589_PIN_CONFIG_B] = ADP5585_PIN_CONFIG_B, + [ADP5589_PIN_CONFIG_D] = ADP5585_PIN_CONFIG_D, + [ADP5589_GENERAL_CFG] = ADP5585_GENERAL_CFG, + [ADP5589_INT_EN] = ADP5585_INT_EN, +}; + +static unsigned char adp5585_reg(unsigned char reg) +{ + return adp5585_reg_lut[reg]; +} + +static const struct adp_constants const_adp5585 = { + .maxgpio = ADP5585_MAXGPIO, + .keymapsize = ADP5585_KEYMAPSIZE, + .gpi_pin_row_base = ADP5585_GPI_PIN_ROW_BASE, + .gpi_pin_row_end = ADP5585_GPI_PIN_ROW_END, + .gpi_pin_col_base = ADP5585_GPI_PIN_COL_BASE, + .gpi_pin_base = ADP5585_GPI_PIN_BASE, + .gpi_pin_end = ADP5585_GPI_PIN_END, + .gpimapsize_max = ADP5585_GPIMAPSIZE_MAX, + .c4_extend_cfg = 10, + .max_row_num = ADP5585_MAX_ROW_NUM, + .max_col_num = ADP5585_MAX_COL_NUM, + .row_mask = ADP5585_ROW_MASK, + .col_mask = ADP5585_COL_MASK, + .col_shift = ADP5585_COL_SHIFT, + .bank = adp5585_bank, + .bit = adp5585_bit, + .reg = adp5585_reg, +}; + static int adp5589_read(struct i2c_client *client, u8 reg) { int ret = i2c_smbus_read_byte_data(client, reg); @@ -109,19 +389,20 @@ static int adp5589_write(struct i2c_client *client, u8 reg, u8 val) static int adp5589_gpio_get_value(struct gpio_chip *chip, unsigned off) { struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); - return !!(adp5589_read(kpad->client, ADP5589_GPI_STATUS_A + bank) & - bit); + return !!(adp5589_read(kpad->client, + kpad->var->reg(ADP5589_GPI_STATUS_A) + bank) & + bit); } static void adp5589_gpio_set_value(struct gpio_chip *chip, unsigned off, int val) { struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); mutex_lock(&kpad->gpio_lock); @@ -130,8 +411,8 @@ static void adp5589_gpio_set_value(struct gpio_chip *chip, else kpad->dat_out[bank] &= ~bit; - adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank, - kpad->dat_out[bank]); + adp5589_write(kpad->client, kpad->var->reg(ADP5589_GPO_DATA_OUT_A) + + bank, kpad->dat_out[bank]); mutex_unlock(&kpad->gpio_lock); } @@ -139,14 +420,15 @@ static void adp5589_gpio_set_value(struct gpio_chip *chip, static int adp5589_gpio_direction_input(struct gpio_chip *chip, unsigned off) { struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); int ret; mutex_lock(&kpad->gpio_lock); kpad->dir[bank] &= ~bit; - ret = adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank, + ret = adp5589_write(kpad->client, + kpad->var->reg(ADP5589_GPIO_DIRECTION_A) + bank, kpad->dir[bank]); mutex_unlock(&kpad->gpio_lock); @@ -158,8 +440,8 @@ static int adp5589_gpio_direction_output(struct gpio_chip *chip, unsigned off, int val) { struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); int ret; mutex_lock(&kpad->gpio_lock); @@ -171,9 +453,10 @@ static int adp5589_gpio_direction_output(struct gpio_chip *chip, else kpad->dat_out[bank] &= ~bit; - ret = adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank, - kpad->dat_out[bank]); - ret |= adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank, + ret = adp5589_write(kpad->client, kpad->var->reg(ADP5589_GPO_DATA_OUT_A) + + bank, kpad->dat_out[bank]); + ret |= adp5589_write(kpad->client, + kpad->var->reg(ADP5589_GPIO_DIRECTION_A) + bank, kpad->dir[bank]); mutex_unlock(&kpad->gpio_lock); @@ -184,26 +467,29 @@ static int adp5589_gpio_direction_output(struct gpio_chip *chip, static int __devinit adp5589_build_gpiomap(struct adp5589_kpad *kpad, const struct adp5589_kpad_platform_data *pdata) { - bool pin_used[MAXGPIO]; + bool pin_used[ADP5589_MAXGPIO]; int n_unused = 0; int i; memset(pin_used, false, sizeof(pin_used)); - for (i = 0; i < MAXGPIO; i++) + for (i = 0; i < kpad->var->maxgpio; i++) if (pdata->keypad_en_mask & (1 << i)) pin_used[i] = true; for (i = 0; i < kpad->gpimapsize; i++) - pin_used[kpad->gpimap[i].pin - ADP5589_GPI_PIN_BASE] = true; + pin_used[kpad->gpimap[i].pin - kpad->var->gpi_pin_base] = true; if (kpad->extend_cfg & R4_EXTEND_CFG) pin_used[4] = true; if (kpad->extend_cfg & C4_EXTEND_CFG) - pin_used[12] = true; + pin_used[kpad->var->c4_extend_cfg] = true; + + if (!kpad->adp5585_support_row5) + pin_used[5] = true; - for (i = 0; i < MAXGPIO; i++) + for (i = 0; i < kpad->var->maxgpio; i++) if (!pin_used[i]) kpad->gpiomap[n_unused++] = i; @@ -246,11 +532,11 @@ static int __devinit adp5589_gpio_add(struct adp5589_kpad *kpad) return error; } - for (i = 0; i <= ADP_BANK(MAXGPIO); i++) { - kpad->dat_out[i] = adp5589_read(kpad->client, - ADP5589_GPO_DATA_OUT_A + i); - kpad->dir[i] = adp5589_read(kpad->client, - ADP5589_GPIO_DIRECTION_A + i); + for (i = 0; i <= kpad->var->bank(kpad->var->maxgpio); i++) { + kpad->dat_out[i] = adp5589_read(kpad->client, kpad->var->reg( + ADP5589_GPO_DATA_OUT_A) + i); + kpad->dir[i] = adp5589_read(kpad->client, kpad->var->reg( + ADP5589_GPIO_DIRECTION_A) + i); } if (gpio_data->setup) { @@ -317,11 +603,11 @@ static void adp5589_report_events(struct adp5589_kpad *kpad, int ev_cnt) int i; for (i = 0; i < ev_cnt; i++) { - int key = adp5589_read(kpad->client, ADP5589_FIFO_1 + i); + int key = adp5589_read(kpad->client, ADP5589_5_FIFO_1 + i); int key_val = key & KEY_EV_MASK; - if (key_val >= ADP5589_GPI_PIN_BASE && - key_val <= ADP5589_GPI_PIN_END) { + if (key_val >= kpad->var->gpi_pin_base && + key_val <= kpad->var->gpi_pin_end) { adp5589_report_switches(kpad, key, key_val); } else { input_report_key(kpad->input, @@ -337,29 +623,30 @@ static irqreturn_t adp5589_irq(int irq, void *handle) struct i2c_client *client = kpad->client; int status, ev_cnt; - status = adp5589_read(client, ADP5589_INT_STATUS); + status = adp5589_read(client, ADP5589_5_INT_STATUS); if (status & OVRFLOW_INT) /* Unlikely and should never happen */ dev_err(&client->dev, "Event Overflow Error\n"); if (status & EVENT_INT) { - ev_cnt = adp5589_read(client, ADP5589_STATUS) & KEC; + ev_cnt = adp5589_read(client, ADP5589_5_STATUS) & KEC; if (ev_cnt) { adp5589_report_events(kpad, ev_cnt); input_sync(kpad->input); } } - adp5589_write(client, ADP5589_INT_STATUS, status); /* Status is W1C */ + adp5589_write(client, ADP5589_5_INT_STATUS, status); /* Status is W1C */ return IRQ_HANDLED; } -static int __devinit adp5589_get_evcode(struct adp5589_kpad *kpad, unsigned short key) +static int __devinit adp5589_get_evcode(struct adp5589_kpad *kpad, + unsigned short key) { int i; - for (i = 0; i < ADP5589_KEYMAPSIZE; i++) + for (i = 0; i < kpad->var->keymapsize; i++) if (key == kpad->keycode[i]) return (i + 1) | KEY_EV_PRESSED; @@ -372,19 +659,23 @@ static int __devinit adp5589_setup(struct adp5589_kpad *kpad) { struct i2c_client *client = kpad->client; const struct adp5589_kpad_platform_data *pdata = - client->dev.platform_data; - int i, ret; + client->dev.platform_data; + u8 (*reg) (u8) = kpad->var->reg; unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0; unsigned char pull_mask = 0; + int i, ret; + + ret = adp5589_write(client, reg(ADP5589_PIN_CONFIG_A), + pdata->keypad_en_mask & kpad->var->row_mask); + ret |= adp5589_write(client, reg(ADP5589_PIN_CONFIG_B), + (pdata->keypad_en_mask >> kpad->var->col_shift) & + kpad->var->col_mask); - ret = adp5589_write(client, ADP5589_PIN_CONFIG_A, - pdata->keypad_en_mask & 0xFF); - ret |= adp5589_write(client, ADP5589_PIN_CONFIG_B, - (pdata->keypad_en_mask >> 8) & 0xFF); - ret |= adp5589_write(client, ADP5589_PIN_CONFIG_C, - (pdata->keypad_en_mask >> 16) & 0xFF); + if (!kpad->is_adp5585) + ret |= adp5589_write(client, ADP5589_PIN_CONFIG_C, + (pdata->keypad_en_mask >> 16) & 0xFF); - if (pdata->en_keylock) { + if (!kpad->is_adp5585 && pdata->en_keylock) { ret |= adp5589_write(client, ADP5589_UNLOCK1, pdata->unlock_key1); ret |= adp5589_write(client, ADP5589_UNLOCK2, @@ -395,96 +686,130 @@ static int __devinit adp5589_setup(struct adp5589_kpad *kpad) } for (i = 0; i < KEYP_MAX_EVENT; i++) - ret |= adp5589_read(client, ADP5589_FIFO_1 + i); + ret |= adp5589_read(client, ADP5589_5_FIFO_1 + i); for (i = 0; i < pdata->gpimapsize; i++) { unsigned short pin = pdata->gpimap[i].pin; - if (pin <= ADP5589_GPI_PIN_ROW_END) { - evt_mode1 |= (1 << (pin - ADP5589_GPI_PIN_ROW_BASE)); + if (pin <= kpad->var->gpi_pin_row_end) { + evt_mode1 |= (1 << (pin - kpad->var->gpi_pin_row_base)); } else { evt_mode2 |= - ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) & 0xFF); - evt_mode3 |= - ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) >> 8); + ((1 << (pin - kpad->var->gpi_pin_col_base)) & 0xFF); + if (!kpad->is_adp5585) + evt_mode3 |= ((1 << (pin - + kpad->var->gpi_pin_col_base)) >> 8); } } if (pdata->gpimapsize) { - ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_A, evt_mode1); - ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_B, evt_mode2); - ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_C, evt_mode3); + ret |= adp5589_write(client, reg(ADP5589_GPI_EVENT_EN_A), + evt_mode1); + ret |= adp5589_write(client, reg(ADP5589_GPI_EVENT_EN_B), + evt_mode2); + if (!kpad->is_adp5585) + ret |= adp5589_write(client, + reg(ADP5589_GPI_EVENT_EN_C), + evt_mode3); } if (pdata->pull_dis_mask & pdata->pullup_en_100k & - pdata->pullup_en_300k & pdata->pulldown_en_300k) + pdata->pullup_en_300k & pdata->pulldown_en_300k) dev_warn(&client->dev, "Conflicting pull resistor config\n"); - for (i = 0; i < MAXGPIO; i++) { - unsigned val = 0; + for (i = 0; i <= kpad->var->max_row_num; i++) { + unsigned val = 0, bit = (1 << i); + if (pdata->pullup_en_300k & bit) + val = 0; + else if (pdata->pulldown_en_300k & bit) + val = 1; + else if (pdata->pullup_en_100k & bit) + val = 2; + else if (pdata->pull_dis_mask & bit) + val = 3; + + pull_mask |= val << (2 * (i & 0x3)); + + if (i == 3 || i == kpad->var->max_row_num) { + ret |= adp5589_write(client, reg(ADP5585_RPULL_CONFIG_A) + + (i >> 2), pull_mask); + pull_mask = 0; + } + } - if (pdata->pullup_en_300k & (1 << i)) + for (i = 0; i <= kpad->var->max_col_num; i++) { + unsigned val = 0, bit = 1 << (i + kpad->var->col_shift); + if (pdata->pullup_en_300k & bit) val = 0; - else if (pdata->pulldown_en_300k & (1 << i)) + else if (pdata->pulldown_en_300k & bit) val = 1; - else if (pdata->pullup_en_100k & (1 << i)) + else if (pdata->pullup_en_100k & bit) val = 2; - else if (pdata->pull_dis_mask & (1 << i)) + else if (pdata->pull_dis_mask & bit) val = 3; pull_mask |= val << (2 * (i & 0x3)); - if ((i & 0x3) == 0x3 || i == MAXGPIO - 1) { + if (i == 3 || i == kpad->var->max_col_num) { ret |= adp5589_write(client, - ADP5589_RPULL_CONFIG_A + (i >> 2), - pull_mask); + reg(ADP5585_RPULL_CONFIG_C) + + (i >> 2), pull_mask); pull_mask = 0; } } if (pdata->reset1_key_1 && pdata->reset1_key_2 && pdata->reset1_key_3) { - ret |= adp5589_write(client, ADP5589_RESET1_EVENT_A, + ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_A), adp5589_get_evcode(kpad, pdata->reset1_key_1)); - ret |= adp5589_write(client, ADP5589_RESET1_EVENT_B, + ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_B), adp5589_get_evcode(kpad, pdata->reset1_key_2)); - ret |= adp5589_write(client, ADP5589_RESET1_EVENT_C, + ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_C), adp5589_get_evcode(kpad, pdata->reset1_key_3)); kpad->extend_cfg |= R4_EXTEND_CFG; } if (pdata->reset2_key_1 && pdata->reset2_key_2) { - ret |= adp5589_write(client, ADP5589_RESET2_EVENT_A, + ret |= adp5589_write(client, reg(ADP5589_RESET2_EVENT_A), adp5589_get_evcode(kpad, pdata->reset2_key_1)); - ret |= adp5589_write(client, ADP5589_RESET2_EVENT_B, + ret |= adp5589_write(client, reg(ADP5589_RESET2_EVENT_B), adp5589_get_evcode(kpad, pdata->reset2_key_2)); kpad->extend_cfg |= C4_EXTEND_CFG; } if (kpad->extend_cfg) { - ret |= adp5589_write(client, ADP5589_RESET_CFG, + ret |= adp5589_write(client, reg(ADP5589_RESET_CFG), pdata->reset_cfg); - ret |= adp5589_write(client, ADP5589_PIN_CONFIG_D, + ret |= adp5589_write(client, reg(ADP5589_PIN_CONFIG_D), kpad->extend_cfg); } - for (i = 0; i <= ADP_BANK(MAXGPIO); i++) - ret |= adp5589_write(client, ADP5589_DEBOUNCE_DIS_A + i, - pdata->debounce_dis_mask >> (i * 8)); + ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_A), + pdata->debounce_dis_mask & kpad->var->row_mask); - ret |= adp5589_write(client, ADP5589_POLL_PTIME_CFG, + ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_B), + (pdata->debounce_dis_mask >> kpad->var->col_shift) + & kpad->var->col_mask); + + if (!kpad->is_adp5585) + ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_C), + (pdata->debounce_dis_mask >> 16) & 0xFF); + + ret |= adp5589_write(client, reg(ADP5589_POLL_PTIME_CFG), pdata->scan_cycle_time & PTIME_MASK); - ret |= adp5589_write(client, ADP5589_INT_STATUS, LOGIC2_INT | - LOGIC1_INT | OVRFLOW_INT | LOCK_INT | + ret |= adp5589_write(client, ADP5589_5_INT_STATUS, + (kpad->is_adp5585 ? 0 : LOGIC2_INT) | + LOGIC1_INT | OVRFLOW_INT | + (kpad->is_adp5585 ? 0 : LOCK_INT) | GPI_INT | EVENT_INT); /* Status is W1C */ - ret |= adp5589_write(client, ADP5589_GENERAL_CFG, + ret |= adp5589_write(client, reg(ADP5589_GENERAL_CFG), INT_CFG | OSC_EN | CORE_CLK(3)); - ret |= adp5589_write(client, ADP5589_INT_EN, + ret |= adp5589_write(client, reg(ADP5589_INT_EN), OVRFLOW_IEN | GPI_IEN | EVENT_IEN); if (ret < 0) { @@ -497,30 +822,33 @@ static int __devinit adp5589_setup(struct adp5589_kpad *kpad) static void __devinit adp5589_report_switch_state(struct adp5589_kpad *kpad) { - int gpi_stat1 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_A); - int gpi_stat2 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_B); - int gpi_stat3 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_C); int gpi_stat_tmp, pin_loc; int i; + int gpi_stat1 = adp5589_read(kpad->client, + kpad->var->reg(ADP5589_GPI_STATUS_A)); + int gpi_stat2 = adp5589_read(kpad->client, + kpad->var->reg(ADP5589_GPI_STATUS_B)); + int gpi_stat3 = !kpad->is_adp5585 ? + adp5589_read(kpad->client, ADP5589_GPI_STATUS_C) : 0; for (i = 0; i < kpad->gpimapsize; i++) { unsigned short pin = kpad->gpimap[i].pin; - if (pin <= ADP5589_GPI_PIN_ROW_END) { + if (pin <= kpad->var->gpi_pin_row_end) { gpi_stat_tmp = gpi_stat1; - pin_loc = pin - ADP5589_GPI_PIN_ROW_BASE; - } else if ((pin - ADP5589_GPI_PIN_COL_BASE) < 8) { + pin_loc = pin - kpad->var->gpi_pin_row_base; + } else if ((pin - kpad->var->gpi_pin_col_base) < 8) { gpi_stat_tmp = gpi_stat2; - pin_loc = pin - ADP5589_GPI_PIN_COL_BASE; + pin_loc = pin - kpad->var->gpi_pin_col_base; } else { gpi_stat_tmp = gpi_stat3; - pin_loc = pin - ADP5589_GPI_PIN_COL_BASE - 8; + pin_loc = pin - kpad->var->gpi_pin_col_base - 8; } if (gpi_stat_tmp < 0) { dev_err(&kpad->client->dev, - "Can't read GPIO_DAT_STAT switch" - " %d default to OFF\n", pin); + "Can't read GPIO_DAT_STAT switch %d, default to OFF\n", + pin); gpi_stat_tmp = 0; } @@ -536,7 +864,8 @@ static int __devinit adp5589_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct adp5589_kpad *kpad; - const struct adp5589_kpad_platform_data *pdata; + const struct adp5589_kpad_platform_data *pdata = + client->dev.platform_data; struct input_dev *input; unsigned int revid; int ret, i; @@ -548,56 +877,79 @@ static int __devinit adp5589_probe(struct i2c_client *client, return -EIO; } - pdata = client->dev.platform_data; if (!pdata) { dev_err(&client->dev, "no platform data?\n"); return -EINVAL; } - if (!((pdata->keypad_en_mask & 0xFF) && - (pdata->keypad_en_mask >> 8)) || !pdata->keymap) { + kpad = kzalloc(sizeof(*kpad), GFP_KERNEL); + if (!kpad) + return -ENOMEM; + + switch (id->driver_data) { + case ADP5585_02: + kpad->adp5585_support_row5 = true; + case ADP5585_01: + kpad->is_adp5585 = true; + kpad->var = &const_adp5585; + break; + case ADP5589: + kpad->var = &const_adp5589; + break; + } + + if (!((pdata->keypad_en_mask & kpad->var->row_mask) && + (pdata->keypad_en_mask >> kpad->var->col_shift)) || + !pdata->keymap) { dev_err(&client->dev, "no rows, cols or keymap from pdata\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } - if (pdata->keymapsize != ADP5589_KEYMAPSIZE) { + if (pdata->keymapsize != kpad->var->keymapsize) { dev_err(&client->dev, "invalid keymapsize\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } if (!pdata->gpimap && pdata->gpimapsize) { dev_err(&client->dev, "invalid gpimap from pdata\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } - if (pdata->gpimapsize > ADP5589_GPIMAPSIZE_MAX) { + if (pdata->gpimapsize > kpad->var->gpimapsize_max) { dev_err(&client->dev, "invalid gpimapsize\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } for (i = 0; i < pdata->gpimapsize; i++) { unsigned short pin = pdata->gpimap[i].pin; - if (pin < ADP5589_GPI_PIN_BASE || pin > ADP5589_GPI_PIN_END) { + if (pin < kpad->var->gpi_pin_base || + pin > kpad->var->gpi_pin_end) { dev_err(&client->dev, "invalid gpi pin data\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } - if ((1 << (pin - ADP5589_GPI_PIN_ROW_BASE)) & + if ((1 << (pin - kpad->var->gpi_pin_row_base)) & pdata->keypad_en_mask) { dev_err(&client->dev, "invalid gpi row/col data\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } } if (!client->irq) { dev_err(&client->dev, "no IRQ?\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } - kpad = kzalloc(sizeof(*kpad), GFP_KERNEL); input = input_allocate_device(); - if (!kpad || !input) { + if (!input) { error = -ENOMEM; goto err_free_mem; } @@ -605,13 +957,13 @@ static int __devinit adp5589_probe(struct i2c_client *client, kpad->client = client; kpad->input = input; - ret = adp5589_read(client, ADP5589_ID); + ret = adp5589_read(client, ADP5589_5_ID); if (ret < 0) { error = ret; - goto err_free_mem; + goto err_free_input; } - revid = (u8) ret & ADP5589_DEVICE_ID_MASK; + revid = (u8) ret & ADP5589_5_DEVICE_ID_MASK; input->name = client->name; input->phys = "adp5589-keys/input0"; @@ -652,7 +1004,7 @@ static int __devinit adp5589_probe(struct i2c_client *client, error = input_register_device(input); if (error) { dev_err(&client->dev, "unable to register input device\n"); - goto err_free_mem; + goto err_free_input; } error = request_threaded_irq(client->irq, NULL, adp5589_irq, @@ -685,8 +1037,9 @@ err_free_irq: err_unreg_dev: input_unregister_device(input); input = NULL; -err_free_mem: +err_free_input: input_free_device(input); +err_free_mem: kfree(kpad); return error; @@ -696,7 +1049,7 @@ static int __devexit adp5589_remove(struct i2c_client *client) { struct adp5589_kpad *kpad = i2c_get_clientdata(client); - adp5589_write(client, ADP5589_GENERAL_CFG, 0); + adp5589_write(client, kpad->var->reg(ADP5589_GENERAL_CFG), 0); free_irq(client->irq, kpad); input_unregister_device(kpad->input); adp5589_gpio_remove(kpad); @@ -736,7 +1089,9 @@ static int adp5589_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(adp5589_dev_pm_ops, adp5589_suspend, adp5589_resume); static const struct i2c_device_id adp5589_id[] = { - {"adp5589-keys", 0}, + {"adp5589-keys", ADP5589}, + {"adp5585-keys", ADP5585_01}, + {"adp5585-02-keys", ADP5585_02}, /* Adds ROW5 to ADP5585 */ {} }; @@ -767,4 +1122,4 @@ module_exit(adp5589_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); -MODULE_DESCRIPTION("ADP5589 Keypad driver"); +MODULE_DESCRIPTION("ADP5589/ADP5585 Keypad driver"); diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c index cd89d17162a3..9d82b3aeff5e 100644 --- a/drivers/input/keyboard/davinci_keyscan.c +++ b/drivers/input/keyboard/davinci_keyscan.c @@ -271,7 +271,7 @@ static int __init davinci_ks_probe(struct platform_device *pdev) } error = request_irq(davinci_ks->irq, davinci_ks_interrupt, - IRQF_DISABLED, pdev->name, davinci_ks); + 0, pdev->name, davinci_ks); if (error < 0) { dev_err(dev, "unable to register davinci key scan interrupt\n"); goto fail5; diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c index aa17e024d803..4662c5da8018 100644 --- a/drivers/input/keyboard/ep93xx_keypad.c +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -323,7 +323,7 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev) platform_set_drvdata(pdev, keypad); err = request_irq(keypad->irq, ep93xx_keypad_irq_handler, - IRQF_DISABLED, pdev->name, keypad); + 0, pdev->name, keypad); if (err) goto failed_free_dev; diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 67df91af8424..ed1ed469d085 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -461,8 +461,7 @@ static int gpio_keys_get_devtree_pdata(struct device *dev, struct device_node *node, *pp; int i; struct gpio_keys_button *buttons; - const u32 *reg; - int len; + u32 reg; node = dev->of_node; if (node == NULL) @@ -470,7 +469,7 @@ static int gpio_keys_get_devtree_pdata(struct device *dev, memset(pdata, 0, sizeof *pdata); - pdata->rep = !!of_get_property(node, "autorepeat", &len); + pdata->rep = !!of_get_property(node, "autorepeat", NULL); /* First count the subnodes */ pdata->nbuttons = 0; @@ -498,22 +497,25 @@ static int gpio_keys_get_devtree_pdata(struct device *dev, buttons[i].gpio = of_get_gpio_flags(pp, 0, &flags); buttons[i].active_low = flags & OF_GPIO_ACTIVE_LOW; - reg = of_get_property(pp, "linux,code", &len); - if (!reg) { + if (of_property_read_u32(pp, "linux,code", ®)) { dev_err(dev, "Button without keycode: 0x%x\n", buttons[i].gpio); goto out_fail; } - buttons[i].code = be32_to_cpup(reg); + buttons[i].code = reg; - buttons[i].desc = of_get_property(pp, "label", &len); + buttons[i].desc = of_get_property(pp, "label", NULL); - reg = of_get_property(pp, "linux,input-type", &len); - buttons[i].type = reg ? be32_to_cpup(reg) : EV_KEY; + if (of_property_read_u32(pp, "linux,input-type", ®) == 0) + buttons[i].type = reg; + else + buttons[i].type = EV_KEY; buttons[i].wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL); - reg = of_get_property(pp, "debounce-interval", &len); - buttons[i].debounce_interval = reg ? be32_to_cpup(reg) : 5; + if (of_property_read_u32(pp, "debounce-interval", ®) == 0) + buttons[i].debounce_interval = reg; + else + buttons[i].debounce_interval = 5; i++; } diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index d92c15c39e68..ccebd2d09151 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -510,7 +510,7 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev) /* Ensure that the keypad will stay dormant until opened */ imx_keypad_inhibit(keypad); - error = request_irq(irq, imx_keypad_irq_handler, IRQF_DISABLED, + error = request_irq(irq, imx_keypad_irq_handler, 0, pdev->name, keypad); if (error) { dev_err(&pdev->dev, "failed to request IRQ\n"); @@ -567,10 +567,54 @@ static int __devexit imx_keypad_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int imx_kbd_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct imx_keypad *kbd = platform_get_drvdata(pdev); + struct input_dev *input_dev = kbd->input_dev; + + /* imx kbd can wake up system even clock is disabled */ + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + clk_disable(kbd->clk); + + mutex_unlock(&input_dev->mutex); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(kbd->irq); + + return 0; +} + +static int imx_kbd_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct imx_keypad *kbd = platform_get_drvdata(pdev); + struct input_dev *input_dev = kbd->input_dev; + + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(kbd->irq); + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + clk_enable(kbd->clk); + + mutex_unlock(&input_dev->mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(imx_kbd_pm_ops, imx_kbd_suspend, imx_kbd_resume); + static struct platform_driver imx_keypad_driver = { .driver = { .name = "imx-keypad", .owner = THIS_MODULE, + .pm = &imx_kbd_pm_ops, }, .probe = imx_keypad_probe, .remove = __devexit_p(imx_keypad_remove), diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c index 2cd3e1d56ea4..0aa6740e60d0 100644 --- a/drivers/input/keyboard/jornada720_kbd.c +++ b/drivers/input/keyboard/jornada720_kbd.c @@ -129,7 +129,7 @@ static int __devinit jornada720_kbd_probe(struct platform_device *pdev) err = request_irq(IRQ_GPIO0, jornada720_kbd_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_FALLING, "jornadakbd", pdev); if (err) { printk(KERN_INFO "jornadakbd720_kbd: Unable to grab IRQ\n"); diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c index 756348a7f93a..82d1dc8badd5 100644 --- a/drivers/input/keyboard/lm8323.c +++ b/drivers/input/keyboard/lm8323.c @@ -788,7 +788,7 @@ static int __devexit lm8323_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP /* * We don't need to explicitly suspend the chip, as it already switches off * when there's no activity. diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index b02e4268e18f..e2ae657717ea 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -343,7 +343,6 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev, for (i = 0; i < pdata->num_row_gpios; i++) { err = request_irq(gpio_to_irq(pdata->row_gpios[i]), matrix_keypad_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "matrix-keypad", keypad); diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 4b0ec35259a1..eca6ae63de14 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -535,7 +535,7 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) input_dev->evbit[0] |= BIT_MASK(EV_REL); } - error = request_irq(irq, pxa27x_keypad_irq_handler, IRQF_DISABLED, + error = request_irq(irq, pxa27x_keypad_irq_handler, 0, pdev->name, keypad); if (error) { dev_err(&pdev->dev, "failed to request IRQ\n"); diff --git a/drivers/input/keyboard/pxa930_rotary.c b/drivers/input/keyboard/pxa930_rotary.c index b7123a44b6ec..35451bf780c7 100644 --- a/drivers/input/keyboard/pxa930_rotary.c +++ b/drivers/input/keyboard/pxa930_rotary.c @@ -148,7 +148,7 @@ static int __devinit pxa930_rotary_probe(struct platform_device *pdev) r->input_dev = input_dev; input_set_drvdata(input_dev, r); - err = request_irq(irq, rotary_irq, IRQF_DISABLED, + err = request_irq(irq, rotary_irq, 0, "enhanced rotary", r); if (err) { dev_err(&pdev->dev, "failed to request IRQ\n"); diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c index 99122f59e988..f60c9e82f204 100644 --- a/drivers/input/keyboard/tc3589x-keypad.c +++ b/drivers/input/keyboard/tc3589x-keypad.c @@ -90,7 +90,7 @@ struct tc_keypad { bool keypad_stopped; }; -static int __devinit tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad) +static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad) { int ret; struct tc3589x *tc3589x = keypad->tc3589x; diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index a5a77915c650..cf3228b0ab90 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -55,6 +55,7 @@ #define KBC_ROW_CFG0_0 0x8 #define KBC_COL_CFG0_0 0x18 +#define KBC_TO_CNT_0 0x24 #define KBC_INIT_DLY_0 0x28 #define KBC_RPT_DLY_0 0x2c #define KBC_KP_ENT0_0 0x30 @@ -70,6 +71,7 @@ struct tegra_kbc { spinlock_t lock; unsigned int repoll_dly; unsigned long cp_dly_jiffies; + unsigned int cp_to_wkup_dly; bool use_fn_map; bool use_ghost_filter; const struct tegra_kbc_platform_data *pdata; @@ -258,12 +260,10 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) u32 val = 0; unsigned int i; unsigned int num_down = 0; - unsigned long flags; bool fn_keypress = false; bool key_in_same_row = false; bool key_in_same_col = false; - spin_lock_irqsave(&kbc->lock, flags); for (i = 0; i < KBC_MAX_KPENT; i++) { if ((i % 4) == 0) val = readl(kbc->mmio + KBC_KP_ENT0_0 + i); @@ -292,7 +292,7 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) * any 2 of the 3 keys share a row, and any 2 of them share a column. * If so ignore the key presses for this iteration. */ - if ((kbc->use_ghost_filter) && (num_down >= 3)) { + if (kbc->use_ghost_filter && num_down >= 3) { for (i = 0; i < num_down; i++) { unsigned int j; u8 curr_col = scancodes[i] & 0x07; @@ -325,8 +325,6 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) } } - spin_unlock_irqrestore(&kbc->lock, flags); - /* Ignore the key presses for this iteration? */ if (key_in_same_col && key_in_same_row) return; @@ -341,6 +339,18 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) kbc->num_pressed_keys = num_down; } +static void tegra_kbc_set_fifo_interrupt(struct tegra_kbc *kbc, bool enable) +{ + u32 val; + + val = readl(kbc->mmio + KBC_CONTROL_0); + if (enable) + val |= KBC_CONTROL_FIFO_CNT_INT_EN; + else + val &= ~KBC_CONTROL_FIFO_CNT_INT_EN; + writel(val, kbc->mmio + KBC_CONTROL_0); +} + static void tegra_kbc_keypress_timer(unsigned long data) { struct tegra_kbc *kbc = (struct tegra_kbc *)data; @@ -348,6 +358,8 @@ static void tegra_kbc_keypress_timer(unsigned long data) u32 val; unsigned int i; + spin_lock_irqsave(&kbc->lock, flags); + val = (readl(kbc->mmio + KBC_INT_0) >> 4) & 0xf; if (val) { unsigned long dly; @@ -369,26 +381,19 @@ static void tegra_kbc_keypress_timer(unsigned long data) kbc->num_pressed_keys = 0; /* All keys are released so enable the keypress interrupt */ - spin_lock_irqsave(&kbc->lock, flags); - val = readl(kbc->mmio + KBC_CONTROL_0); - val |= KBC_CONTROL_FIFO_CNT_INT_EN; - writel(val, kbc->mmio + KBC_CONTROL_0); - spin_unlock_irqrestore(&kbc->lock, flags); + tegra_kbc_set_fifo_interrupt(kbc, true); } + + spin_unlock_irqrestore(&kbc->lock, flags); } static irqreturn_t tegra_kbc_isr(int irq, void *args) { struct tegra_kbc *kbc = args; - u32 val, ctl; + unsigned long flags; + u32 val; - /* - * Until all keys are released, defer further processing to - * the polling loop in tegra_kbc_keypress_timer - */ - ctl = readl(kbc->mmio + KBC_CONTROL_0); - ctl &= ~KBC_CONTROL_FIFO_CNT_INT_EN; - writel(ctl, kbc->mmio + KBC_CONTROL_0); + spin_lock_irqsave(&kbc->lock, flags); /* * Quickly bail out & reenable interrupts if the fifo threshold @@ -399,15 +404,15 @@ static irqreturn_t tegra_kbc_isr(int irq, void *args) if (val & KBC_INT_FIFO_CNT_INT_STATUS) { /* - * Schedule timer to run when hardware is in continuous - * polling mode. + * Until all keys are released, defer further processing to + * the polling loop in tegra_kbc_keypress_timer. */ + tegra_kbc_set_fifo_interrupt(kbc, false); mod_timer(&kbc->timer, jiffies + kbc->cp_dly_jiffies); - } else { - ctl |= KBC_CONTROL_FIFO_CNT_INT_EN; - writel(ctl, kbc->mmio + KBC_CONTROL_0); } + spin_unlock_irqrestore(&kbc->lock, flags); + return IRQ_HANDLED; } @@ -455,7 +460,6 @@ static void tegra_kbc_config_pins(struct tegra_kbc *kbc) static int tegra_kbc_start(struct tegra_kbc *kbc) { const struct tegra_kbc_platform_data *pdata = kbc->pdata; - unsigned long flags; unsigned int debounce_cnt; u32 val = 0; @@ -493,7 +497,6 @@ static int tegra_kbc_start(struct tegra_kbc *kbc) * Atomically clear out any remaining entries in the key FIFO * and enable keyboard interrupts. */ - spin_lock_irqsave(&kbc->lock, flags); while (1) { val = readl(kbc->mmio + KBC_INT_0); val >>= 4; @@ -504,7 +507,6 @@ static int tegra_kbc_start(struct tegra_kbc *kbc) val = readl(kbc->mmio + KBC_KP_ENT1_0); } writel(0x7, kbc->mmio + KBC_INT_0); - spin_unlock_irqrestore(&kbc->lock, flags); enable_irq(kbc->irq); @@ -734,18 +736,30 @@ static int tegra_kbc_suspend(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct tegra_kbc *kbc = platform_get_drvdata(pdev); + mutex_lock(&kbc->idev->mutex); if (device_may_wakeup(&pdev->dev)) { - tegra_kbc_setup_wakekeys(kbc, true); - enable_irq_wake(kbc->irq); + disable_irq(kbc->irq); + del_timer_sync(&kbc->timer); + tegra_kbc_set_fifo_interrupt(kbc, false); + /* Forcefully clear the interrupt status */ writel(0x7, kbc->mmio + KBC_INT_0); + /* + * Store the previous resident time of continuous polling mode. + * Force the keyboard into interrupt mode. + */ + kbc->cp_to_wkup_dly = readl(kbc->mmio + KBC_TO_CNT_0); + writel(0, kbc->mmio + KBC_TO_CNT_0); + + tegra_kbc_setup_wakekeys(kbc, true); msleep(30); + + enable_irq_wake(kbc->irq); } else { - mutex_lock(&kbc->idev->mutex); if (kbc->idev->users) tegra_kbc_stop(kbc); - mutex_unlock(&kbc->idev->mutex); } + mutex_unlock(&kbc->idev->mutex); return 0; } @@ -756,15 +770,22 @@ static int tegra_kbc_resume(struct device *dev) struct tegra_kbc *kbc = platform_get_drvdata(pdev); int err = 0; + mutex_lock(&kbc->idev->mutex); if (device_may_wakeup(&pdev->dev)) { disable_irq_wake(kbc->irq); tegra_kbc_setup_wakekeys(kbc, false); + + /* Restore the resident time of continuous polling mode. */ + writel(kbc->cp_to_wkup_dly, kbc->mmio + KBC_TO_CNT_0); + + tegra_kbc_set_fifo_interrupt(kbc, true); + + enable_irq(kbc->irq); } else { - mutex_lock(&kbc->idev->mutex); if (kbc->idev->users) err = tegra_kbc_start(kbc); - mutex_unlock(&kbc->idev->mutex); } + mutex_unlock(&kbc->idev->mutex); return err; } diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c index ee2bf6bcf291..318586dadacf 100644 --- a/drivers/input/keyboard/w90p910_keypad.c +++ b/drivers/input/keyboard/w90p910_keypad.c @@ -203,7 +203,7 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) input_dev->keycode, input_dev->keybit); error = request_irq(keypad->irq, w90p910_keypad_irq_handler, - IRQF_DISABLED, pdev->name, keypad); + 0, pdev->name, keypad); if (error) { dev_err(&pdev->dev, "failed to request IRQ\n"); goto failed_put_clk; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index c9104bb4db06..a1aa35a053b7 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -62,6 +62,17 @@ config INPUT_AD714X_SPI To compile this driver as a module, choose M here: the module will be called ad714x-spi. +config INPUT_BMA150 + tristate "BMA150/SMB380 acceleration sensor support" + depends on I2C + select INPUT_POLLDEV + help + Say Y here if you have Bosch Sensortec's BMA150 or SMB380 + acceleration sensor hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called bma150. + config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM @@ -74,6 +85,29 @@ config INPUT_PCSPKR To compile this driver as a module, choose M here: the module will be called pcspkr. +config INPUT_PM8XXX_VIBRATOR + tristate "Qualcomm PM8XXX vibrator support" + depends on MFD_PM8XXX + select INPUT_FF_MEMLESS + help + This option enables device driver support for the vibrator + on Qualcomm PM8xxx chip. This driver supports ff-memless interface + from input framework. + + To compile this driver as module, choose M here: the + module will be called pm8xxx-vibrator. + +config INPUT_PMIC8XXX_PWRKEY + tristate "PMIC8XXX power key support" + depends on MFD_PM8XXX + help + Say Y here if you want support for the PMIC8XXX power key. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called pmic8xxx-pwrkey. + config INPUT_SPARCSPKR tristate "SPARC Speaker support" depends on PCI && SPARC64 @@ -379,17 +413,6 @@ config INPUT_PWM_BEEPER To compile this driver as a module, choose M here: the module will be called pwm-beeper. -config INPUT_PMIC8XXX_PWRKEY - tristate "PMIC8XXX power key support" - depends on MFD_PM8XXX - help - Say Y here if you want support for the PMIC8XXX power key. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called pmic8xxx-pwrkey. - config INPUT_GPIO_ROTARY_ENCODER tristate "Rotary encoders connected to GPIO pins" depends on GPIOLIB && GENERIC_GPIO diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 299ad5edba84..53a8d0faad52 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o +obj-$(CONFIG_INPUT_BMA150) += bma150.o obj-$(CONFIG_INPUT_CM109) += cm109.o obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o @@ -34,9 +35,10 @@ obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o +obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o +obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o -obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c index 025417d74ca2..56810fb4eadd 100644 --- a/drivers/input/misc/ad714x-i2c.c +++ b/drivers/input/misc/ad714x-i2c.c @@ -116,13 +116,13 @@ static struct i2c_driver ad714x_i2c_driver = { .id_table = ad714x_id, }; -static __init int ad714x_i2c_init(void) +static int __init ad714x_i2c_init(void) { return i2c_add_driver(&ad714x_i2c_driver); } module_init(ad714x_i2c_init); -static __exit void ad714x_i2c_exit(void) +static void __exit ad714x_i2c_exit(void) { i2c_del_driver(&ad714x_i2c_driver); } diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c new file mode 100644 index 000000000000..8f55b54352b6 --- /dev/null +++ b/drivers/input/misc/bma150.c @@ -0,0 +1,691 @@ +/* + * Copyright (c) 2011 Bosch Sensortec GmbH + * Copyright (c) 2011 Unixphere + * + * This driver adds support for Bosch Sensortec's digital acceleration + * sensors BMA150 and SMB380. + * The SMB380 is fully compatible with BMA150 and only differs in packaging. + * + * The datasheet for the BMA150 chip can be found here: + * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMA150-DS000-07.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/bma150.h> + +#define ABSMAX_ACC_VAL 0x01FF +#define ABSMIN_ACC_VAL -(ABSMAX_ACC_VAL) + +/* Each axis is represented by a 2-byte data word */ +#define BMA150_XYZ_DATA_SIZE 6 + +/* Input poll interval in milliseconds */ +#define BMA150_POLL_INTERVAL 10 +#define BMA150_POLL_MAX 200 +#define BMA150_POLL_MIN 0 + +#define BMA150_BW_25HZ 0 +#define BMA150_BW_50HZ 1 +#define BMA150_BW_100HZ 2 +#define BMA150_BW_190HZ 3 +#define BMA150_BW_375HZ 4 +#define BMA150_BW_750HZ 5 +#define BMA150_BW_1500HZ 6 + +#define BMA150_RANGE_2G 0 +#define BMA150_RANGE_4G 1 +#define BMA150_RANGE_8G 2 + +#define BMA150_MODE_NORMAL 0 +#define BMA150_MODE_SLEEP 2 +#define BMA150_MODE_WAKE_UP 3 + +/* Data register addresses */ +#define BMA150_DATA_0_REG 0x00 +#define BMA150_DATA_1_REG 0x01 +#define BMA150_DATA_2_REG 0x02 + +/* Control register addresses */ +#define BMA150_CTRL_0_REG 0x0A +#define BMA150_CTRL_1_REG 0x0B +#define BMA150_CTRL_2_REG 0x14 +#define BMA150_CTRL_3_REG 0x15 + +/* Configuration/Setting register addresses */ +#define BMA150_CFG_0_REG 0x0C +#define BMA150_CFG_1_REG 0x0D +#define BMA150_CFG_2_REG 0x0E +#define BMA150_CFG_3_REG 0x0F +#define BMA150_CFG_4_REG 0x10 +#define BMA150_CFG_5_REG 0x11 + +#define BMA150_CHIP_ID 2 +#define BMA150_CHIP_ID_REG BMA150_DATA_0_REG + +#define BMA150_ACC_X_LSB_REG BMA150_DATA_2_REG + +#define BMA150_SLEEP_POS 0 +#define BMA150_SLEEP_MSK 0x01 +#define BMA150_SLEEP_REG BMA150_CTRL_0_REG + +#define BMA150_BANDWIDTH_POS 0 +#define BMA150_BANDWIDTH_MSK 0x07 +#define BMA150_BANDWIDTH_REG BMA150_CTRL_2_REG + +#define BMA150_RANGE_POS 3 +#define BMA150_RANGE_MSK 0x18 +#define BMA150_RANGE_REG BMA150_CTRL_2_REG + +#define BMA150_WAKE_UP_POS 0 +#define BMA150_WAKE_UP_MSK 0x01 +#define BMA150_WAKE_UP_REG BMA150_CTRL_3_REG + +#define BMA150_SW_RES_POS 1 +#define BMA150_SW_RES_MSK 0x02 +#define BMA150_SW_RES_REG BMA150_CTRL_0_REG + +/* Any-motion interrupt register fields */ +#define BMA150_ANY_MOTION_EN_POS 6 +#define BMA150_ANY_MOTION_EN_MSK 0x40 +#define BMA150_ANY_MOTION_EN_REG BMA150_CTRL_1_REG + +#define BMA150_ANY_MOTION_DUR_POS 6 +#define BMA150_ANY_MOTION_DUR_MSK 0xC0 +#define BMA150_ANY_MOTION_DUR_REG BMA150_CFG_5_REG + +#define BMA150_ANY_MOTION_THRES_REG BMA150_CFG_4_REG + +/* Advanced interrupt register fields */ +#define BMA150_ADV_INT_EN_POS 6 +#define BMA150_ADV_INT_EN_MSK 0x40 +#define BMA150_ADV_INT_EN_REG BMA150_CTRL_3_REG + +/* High-G interrupt register fields */ +#define BMA150_HIGH_G_EN_POS 1 +#define BMA150_HIGH_G_EN_MSK 0x02 +#define BMA150_HIGH_G_EN_REG BMA150_CTRL_1_REG + +#define BMA150_HIGH_G_HYST_POS 3 +#define BMA150_HIGH_G_HYST_MSK 0x38 +#define BMA150_HIGH_G_HYST_REG BMA150_CFG_5_REG + +#define BMA150_HIGH_G_DUR_REG BMA150_CFG_3_REG +#define BMA150_HIGH_G_THRES_REG BMA150_CFG_2_REG + +/* Low-G interrupt register fields */ +#define BMA150_LOW_G_EN_POS 0 +#define BMA150_LOW_G_EN_MSK 0x01 +#define BMA150_LOW_G_EN_REG BMA150_CTRL_1_REG + +#define BMA150_LOW_G_HYST_POS 0 +#define BMA150_LOW_G_HYST_MSK 0x07 +#define BMA150_LOW_G_HYST_REG BMA150_CFG_5_REG + +#define BMA150_LOW_G_DUR_REG BMA150_CFG_1_REG +#define BMA150_LOW_G_THRES_REG BMA150_CFG_0_REG + +struct bma150_data { + struct i2c_client *client; + struct input_polled_dev *input_polled; + struct input_dev *input; + u8 mode; +}; + +/* + * The settings for the given range, bandwidth and interrupt features + * are stated and verified by Bosch Sensortec where they are configured + * to provide a generic sensitivity performance. + */ +static struct bma150_cfg default_cfg __devinitdata = { + .any_motion_int = 1, + .hg_int = 1, + .lg_int = 1, + .any_motion_dur = 0, + .any_motion_thres = 0, + .hg_hyst = 0, + .hg_dur = 150, + .hg_thres = 160, + .lg_hyst = 0, + .lg_dur = 150, + .lg_thres = 20, + .range = BMA150_RANGE_2G, + .bandwidth = BMA150_BW_50HZ +}; + +static int bma150_write_byte(struct i2c_client *client, u8 reg, u8 val) +{ + s32 ret; + + /* As per specification, disable irq in between register writes */ + if (client->irq) + disable_irq_nosync(client->irq); + + ret = i2c_smbus_write_byte_data(client, reg, val); + + if (client->irq) + enable_irq(client->irq); + + return ret; +} + +static int bma150_set_reg_bits(struct i2c_client *client, + int val, int shift, u8 mask, u8 reg) +{ + int data; + + data = i2c_smbus_read_byte_data(client, reg); + if (data < 0) + return data; + + data = (data & ~mask) | ((val << shift) & mask); + return bma150_write_byte(client, reg, data); +} + +static int bma150_set_mode(struct bma150_data *bma150, u8 mode) +{ + int error; + + error = bma150_set_reg_bits(bma150->client, mode, BMA150_WAKE_UP_POS, + BMA150_WAKE_UP_MSK, BMA150_WAKE_UP_REG); + if (error) + return error; + + error = bma150_set_reg_bits(bma150->client, mode, BMA150_SLEEP_POS, + BMA150_SLEEP_MSK, BMA150_SLEEP_REG); + if (error) + return error; + + if (mode == BMA150_MODE_NORMAL) + msleep(2); + + bma150->mode = mode; + return 0; +} + +static int __devinit bma150_soft_reset(struct bma150_data *bma150) +{ + int error; + + error = bma150_set_reg_bits(bma150->client, 1, BMA150_SW_RES_POS, + BMA150_SW_RES_MSK, BMA150_SW_RES_REG); + if (error) + return error; + + msleep(2); + return 0; +} + +static int __devinit bma150_set_range(struct bma150_data *bma150, u8 range) +{ + return bma150_set_reg_bits(bma150->client, range, BMA150_RANGE_POS, + BMA150_RANGE_MSK, BMA150_RANGE_REG); +} + +static int __devinit bma150_set_bandwidth(struct bma150_data *bma150, u8 bw) +{ + return bma150_set_reg_bits(bma150->client, bw, BMA150_BANDWIDTH_POS, + BMA150_BANDWIDTH_MSK, BMA150_BANDWIDTH_REG); +} + +static int __devinit bma150_set_low_g_interrupt(struct bma150_data *bma150, + u8 enable, u8 hyst, u8 dur, u8 thres) +{ + int error; + + error = bma150_set_reg_bits(bma150->client, hyst, + BMA150_LOW_G_HYST_POS, BMA150_LOW_G_HYST_MSK, + BMA150_LOW_G_HYST_REG); + if (error) + return error; + + error = bma150_write_byte(bma150->client, BMA150_LOW_G_DUR_REG, dur); + if (error) + return error; + + error = bma150_write_byte(bma150->client, BMA150_LOW_G_THRES_REG, thres); + if (error) + return error; + + return bma150_set_reg_bits(bma150->client, !!enable, + BMA150_LOW_G_EN_POS, BMA150_LOW_G_EN_MSK, + BMA150_LOW_G_EN_REG); +} + +static int __devinit bma150_set_high_g_interrupt(struct bma150_data *bma150, + u8 enable, u8 hyst, u8 dur, u8 thres) +{ + int error; + + error = bma150_set_reg_bits(bma150->client, hyst, + BMA150_HIGH_G_HYST_POS, BMA150_HIGH_G_HYST_MSK, + BMA150_HIGH_G_HYST_REG); + if (error) + return error; + + error = bma150_write_byte(bma150->client, + BMA150_HIGH_G_DUR_REG, dur); + if (error) + return error; + + error = bma150_write_byte(bma150->client, + BMA150_HIGH_G_THRES_REG, thres); + if (error) + return error; + + return bma150_set_reg_bits(bma150->client, !!enable, + BMA150_HIGH_G_EN_POS, BMA150_HIGH_G_EN_MSK, + BMA150_HIGH_G_EN_REG); +} + + +static int __devinit bma150_set_any_motion_interrupt(struct bma150_data *bma150, + u8 enable, u8 dur, u8 thres) +{ + int error; + + error = bma150_set_reg_bits(bma150->client, dur, + BMA150_ANY_MOTION_DUR_POS, + BMA150_ANY_MOTION_DUR_MSK, + BMA150_ANY_MOTION_DUR_REG); + if (error) + return error; + + error = bma150_write_byte(bma150->client, + BMA150_ANY_MOTION_THRES_REG, thres); + if (error) + return error; + + error = bma150_set_reg_bits(bma150->client, !!enable, + BMA150_ADV_INT_EN_POS, BMA150_ADV_INT_EN_MSK, + BMA150_ADV_INT_EN_REG); + if (error) + return error; + + return bma150_set_reg_bits(bma150->client, !!enable, + BMA150_ANY_MOTION_EN_POS, + BMA150_ANY_MOTION_EN_MSK, + BMA150_ANY_MOTION_EN_REG); +} + +static void bma150_report_xyz(struct bma150_data *bma150) +{ + u8 data[BMA150_XYZ_DATA_SIZE]; + s16 x, y, z; + s32 ret; + + ret = i2c_smbus_read_i2c_block_data(bma150->client, + BMA150_ACC_X_LSB_REG, BMA150_XYZ_DATA_SIZE, data); + if (ret != BMA150_XYZ_DATA_SIZE) + return; + + x = ((0xc0 & data[0]) >> 6) | (data[1] << 2); + y = ((0xc0 & data[2]) >> 6) | (data[3] << 2); + z = ((0xc0 & data[4]) >> 6) | (data[5] << 2); + + /* sign extension */ + x = (s16) (x << 6) >> 6; + y = (s16) (y << 6) >> 6; + z = (s16) (z << 6) >> 6; + + input_report_abs(bma150->input, ABS_X, x); + input_report_abs(bma150->input, ABS_Y, y); + input_report_abs(bma150->input, ABS_Z, z); + input_sync(bma150->input); +} + +static irqreturn_t bma150_irq_thread(int irq, void *dev) +{ + bma150_report_xyz(dev); + + return IRQ_HANDLED; +} + +static void bma150_poll(struct input_polled_dev *dev) +{ + bma150_report_xyz(dev->private); +} + +static int bma150_open(struct bma150_data *bma150) +{ + int error; + + error = pm_runtime_get_sync(&bma150->client->dev); + if (error && error != -ENOSYS) + return error; + + /* + * See if runtime PM woke up the device. If runtime PM + * is disabled we need to do it ourselves. + */ + if (bma150->mode != BMA150_MODE_NORMAL) { + error = bma150_set_mode(bma150, BMA150_MODE_NORMAL); + if (error) + return error; + } + + return 0; +} + +static void bma150_close(struct bma150_data *bma150) +{ + pm_runtime_put_sync(&bma150->client->dev); + + if (bma150->mode != BMA150_MODE_SLEEP) + bma150_set_mode(bma150, BMA150_MODE_SLEEP); +} + +static int bma150_irq_open(struct input_dev *input) +{ + struct bma150_data *bma150 = input_get_drvdata(input); + + return bma150_open(bma150); +} + +static void bma150_irq_close(struct input_dev *input) +{ + struct bma150_data *bma150 = input_get_drvdata(input); + + bma150_close(bma150); +} + +static void bma150_poll_open(struct input_polled_dev *ipoll_dev) +{ + struct bma150_data *bma150 = ipoll_dev->private; + + bma150_open(bma150); +} + +static void bma150_poll_close(struct input_polled_dev *ipoll_dev) +{ + struct bma150_data *bma150 = ipoll_dev->private; + + bma150_close(bma150); +} + +static int __devinit bma150_initialize(struct bma150_data *bma150, + const struct bma150_cfg *cfg) +{ + int error; + + error = bma150_soft_reset(bma150); + if (error) + return error; + + error = bma150_set_bandwidth(bma150, cfg->bandwidth); + if (error) + return error; + + error = bma150_set_range(bma150, cfg->range); + if (error) + return error; + + if (bma150->client->irq) { + error = bma150_set_any_motion_interrupt(bma150, + cfg->any_motion_int, + cfg->any_motion_dur, + cfg->any_motion_thres); + if (error) + return error; + + error = bma150_set_high_g_interrupt(bma150, + cfg->hg_int, cfg->hg_hyst, + cfg->hg_dur, cfg->hg_thres); + if (error) + return error; + + error = bma150_set_low_g_interrupt(bma150, + cfg->lg_int, cfg->lg_hyst, + cfg->lg_dur, cfg->lg_thres); + if (error) + return error; + } + + return bma150_set_mode(bma150, BMA150_MODE_SLEEP); +} + +static void __devinit bma150_init_input_device(struct bma150_data *bma150, + struct input_dev *idev) +{ + idev->name = BMA150_DRIVER; + idev->phys = BMA150_DRIVER "/input0"; + idev->id.bustype = BUS_I2C; + idev->dev.parent = &bma150->client->dev; + + idev->evbit[0] = BIT_MASK(EV_ABS); + input_set_abs_params(idev, ABS_X, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0); + input_set_abs_params(idev, ABS_Y, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0); + input_set_abs_params(idev, ABS_Z, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0); +} + +static int __devinit bma150_register_input_device(struct bma150_data *bma150) +{ + struct input_dev *idev; + int error; + + idev = input_allocate_device(); + if (!idev) + return -ENOMEM; + + bma150_init_input_device(bma150, idev); + + idev->open = bma150_irq_open; + idev->close = bma150_irq_close; + input_set_drvdata(idev, bma150); + + error = input_register_device(idev); + if (error) { + input_free_device(idev); + return error; + } + + bma150->input = idev; + return 0; +} + +static int __devinit bma150_register_polled_device(struct bma150_data *bma150) +{ + struct input_polled_dev *ipoll_dev; + int error; + + ipoll_dev = input_allocate_polled_device(); + if (!ipoll_dev) + return -ENOMEM; + + ipoll_dev->private = bma150; + ipoll_dev->open = bma150_poll_open; + ipoll_dev->close = bma150_poll_close; + ipoll_dev->poll = bma150_poll; + ipoll_dev->poll_interval = BMA150_POLL_INTERVAL; + ipoll_dev->poll_interval_min = BMA150_POLL_MIN; + ipoll_dev->poll_interval_max = BMA150_POLL_MAX; + + bma150_init_input_device(bma150, ipoll_dev->input); + + error = input_register_polled_device(ipoll_dev); + if (error) { + input_free_polled_device(ipoll_dev); + return error; + } + + bma150->input_polled = ipoll_dev; + bma150->input = ipoll_dev->input; + + return 0; +} + +static int __devinit bma150_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct bma150_platform_data *pdata = client->dev.platform_data; + const struct bma150_cfg *cfg; + struct bma150_data *bma150; + int chip_id; + int error; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "i2c_check_functionality error\n"); + return -EIO; + } + + chip_id = i2c_smbus_read_byte_data(client, BMA150_CHIP_ID_REG); + if (chip_id != BMA150_CHIP_ID) { + dev_err(&client->dev, "BMA150 chip id error: %d\n", chip_id); + return -EINVAL; + } + + bma150 = kzalloc(sizeof(struct bma150_data), GFP_KERNEL); + if (!bma150) + return -ENOMEM; + + bma150->client = client; + + if (pdata) { + if (pdata->irq_gpio_cfg) { + error = pdata->irq_gpio_cfg(); + if (error) { + dev_err(&client->dev, + "IRQ GPIO conf. error %d, error %d\n", + client->irq, error); + goto err_free_mem; + } + } + cfg = &pdata->cfg; + } else { + cfg = &default_cfg; + } + + error = bma150_initialize(bma150, cfg); + if (error) + goto err_free_mem; + + if (client->irq > 0) { + error = bma150_register_input_device(bma150); + if (error) + goto err_free_mem; + + error = request_threaded_irq(client->irq, + NULL, bma150_irq_thread, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + BMA150_DRIVER, bma150); + if (error) { + dev_err(&client->dev, + "irq request failed %d, error %d\n", + client->irq, error); + input_unregister_device(bma150->input); + goto err_free_mem; + } + } else { + error = bma150_register_polled_device(bma150); + if (error) + goto err_free_mem; + } + + i2c_set_clientdata(client, bma150); + + pm_runtime_enable(&client->dev); + + return 0; + +err_free_mem: + kfree(bma150); + return error; +} + +static int __devexit bma150_remove(struct i2c_client *client) +{ + struct bma150_data *bma150 = i2c_get_clientdata(client); + + pm_runtime_disable(&client->dev); + + if (client->irq > 0) { + free_irq(client->irq, bma150); + input_unregister_device(bma150->input); + } else { + input_unregister_polled_device(bma150->input_polled); + input_free_polled_device(bma150->input_polled); + } + + kfree(bma150); + + return 0; +} + +#ifdef CONFIG_PM +static int bma150_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bma150_data *bma150 = i2c_get_clientdata(client); + + return bma150_set_mode(bma150, BMA150_MODE_SLEEP); +} + +static int bma150_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bma150_data *bma150 = i2c_get_clientdata(client); + + return bma150_set_mode(bma150, BMA150_MODE_NORMAL); +} +#endif + +static UNIVERSAL_DEV_PM_OPS(bma150_pm, bma150_suspend, bma150_resume, NULL); + +static const struct i2c_device_id bma150_id[] = { + { "bma150", 0 }, + { "smb380", 0 }, + { "bma023", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, bma150_id); + +static struct i2c_driver bma150_driver = { + .driver = { + .owner = THIS_MODULE, + .name = BMA150_DRIVER, + .pm = &bma150_pm, + }, + .class = I2C_CLASS_HWMON, + .id_table = bma150_id, + .probe = bma150_probe, + .remove = __devexit_p(bma150_remove), +}; + +static int __init BMA150_init(void) +{ + return i2c_add_driver(&bma150_driver); +} + +static void __exit BMA150_exit(void) +{ + i2c_del_driver(&bma150_driver); +} + +MODULE_AUTHOR("Albert Zhang <xu.zhang@bosch-sensortec.com>"); +MODULE_DESCRIPTION("BMA150 driver"); +MODULE_LICENSE("GPL"); + +module_init(BMA150_init); +module_exit(BMA150_exit); diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c index 1f38302a5951..302ab46ce752 100644 --- a/drivers/input/misc/ixp4xx-beeper.c +++ b/drivers/input/misc/ixp4xx-beeper.c @@ -111,7 +111,7 @@ static int __devinit ixp4xx_spkr_probe(struct platform_device *dev) input_dev->event = ixp4xx_spkr_event; err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt, - IRQF_DISABLED | IRQF_NO_SUSPEND, "ixp4xx-beeper", + IRQF_NO_SUSPEND, "ixp4xx-beeper", (void *) dev->id); if (err) goto err_free_device; diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c index 0794778295fc..4d60080bb5d5 100644 --- a/drivers/input/misc/mma8450.c +++ b/drivers/input/misc/mma8450.c @@ -88,13 +88,13 @@ static int mma8450_write(struct mma8450 *m, unsigned off, u8 v) return 0; } -static int mma8450_read_xyz(struct mma8450 *m, int *x, int *y, int *z) +static int mma8450_read_block(struct mma8450 *m, unsigned off, + u8 *buf, size_t size) { struct i2c_client *c = m->client; - u8 buff[6]; int err; - err = i2c_smbus_read_i2c_block_data(c, MMA8450_OUT_X_LSB, 6, buff); + err = i2c_smbus_read_i2c_block_data(c, off, size, buf); if (err < 0) { dev_err(&c->dev, "failed to read block data at 0x%02x, error %d\n", @@ -102,10 +102,6 @@ static int mma8450_read_xyz(struct mma8450 *m, int *x, int *y, int *z) return err; } - *x = ((buff[1] << 4) & 0xff0) | (buff[0] & 0xf); - *y = ((buff[3] << 4) & 0xff0) | (buff[2] & 0xf); - *z = ((buff[5] << 4) & 0xff0) | (buff[4] & 0xf); - return 0; } @@ -114,7 +110,7 @@ static void mma8450_poll(struct input_polled_dev *dev) struct mma8450 *m = dev->private; int x, y, z; int ret; - int err; + u8 buf[6]; ret = mma8450_read(m, MMA8450_STATUS); if (ret < 0) @@ -123,10 +119,14 @@ static void mma8450_poll(struct input_polled_dev *dev) if (!(ret & MMA8450_STATUS_ZXYDR)) return; - err = mma8450_read_xyz(m, &x, &y, &z); - if (err) + ret = mma8450_read_block(m, MMA8450_OUT_X_LSB, buf, sizeof(buf)); + if (ret < 0) return; + x = ((buf[1] << 4) & 0xff0) | (buf[0] & 0xf); + y = ((buf[3] << 4) & 0xff0) | (buf[2] & 0xf); + z = ((buf[5] << 4) & 0xff0) | (buf[4] & 0xf); + input_report_abs(dev->input, ABS_X, x); input_report_abs(dev->input, ABS_Y, y); input_report_abs(dev->input, ABS_Z, z); diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c new file mode 100644 index 000000000000..43192930824b --- /dev/null +++ b/drivers/input/misc/pm8xxx-vibrator.c @@ -0,0 +1,296 @@ +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/mfd/pm8xxx/core.h> + +#define VIB_DRV 0x4A + +#define VIB_DRV_SEL_MASK 0xf8 +#define VIB_DRV_SEL_SHIFT 0x03 +#define VIB_DRV_EN_MANUAL_MASK 0xfc + +#define VIB_MAX_LEVEL_mV (3100) +#define VIB_MIN_LEVEL_mV (1200) +#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV) + +#define MAX_FF_SPEED 0xff + +/** + * struct pm8xxx_vib - structure to hold vibrator data + * @vib_input_dev: input device supporting force feedback + * @work: work structure to set the vibration parameters + * @dev: device supporting force feedback + * @speed: speed of vibration set from userland + * @active: state of vibrator + * @level: level of vibration to set in the chip + * @reg_vib_drv: VIB_DRV register value + */ +struct pm8xxx_vib { + struct input_dev *vib_input_dev; + struct work_struct work; + struct device *dev; + int speed; + int level; + bool active; + u8 reg_vib_drv; +}; + +/** + * pm8xxx_vib_read_u8 - helper to read a byte from pmic chip + * @vib: pointer to vibrator structure + * @data: placeholder for data to be read + * @reg: register address + */ +static int pm8xxx_vib_read_u8(struct pm8xxx_vib *vib, + u8 *data, u16 reg) +{ + int rc; + + rc = pm8xxx_readb(vib->dev->parent, reg, data); + if (rc < 0) + dev_warn(vib->dev, "Error reading pm8xxx reg 0x%x(0x%x)\n", + reg, rc); + return rc; +} + +/** + * pm8xxx_vib_write_u8 - helper to write a byte to pmic chip + * @vib: pointer to vibrator structure + * @data: data to write + * @reg: register address + */ +static int pm8xxx_vib_write_u8(struct pm8xxx_vib *vib, + u8 data, u16 reg) +{ + int rc; + + rc = pm8xxx_writeb(vib->dev->parent, reg, data); + if (rc < 0) + dev_warn(vib->dev, "Error writing pm8xxx reg 0x%x(0x%x)\n", + reg, rc); + return rc; +} + +/** + * pm8xxx_vib_set - handler to start/stop vibration + * @vib: pointer to vibrator structure + * @on: state to set + */ +static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on) +{ + int rc; + u8 val = vib->reg_vib_drv; + + if (on) + val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK); + else + val &= ~VIB_DRV_SEL_MASK; + + rc = pm8xxx_vib_write_u8(vib, val, VIB_DRV); + if (rc < 0) + return rc; + + vib->reg_vib_drv = val; + return 0; +} + +/** + * pm8xxx_work_handler - worker to set vibration level + * @work: pointer to work_struct + */ +static void pm8xxx_work_handler(struct work_struct *work) +{ + struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work); + int rc; + u8 val; + + rc = pm8xxx_vib_read_u8(vib, &val, VIB_DRV); + if (rc < 0) + return; + + /* + * pmic vibrator supports voltage ranges from 1.2 to 3.1V, so + * scale the level to fit into these ranges. + */ + if (vib->speed) { + vib->active = true; + vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) + + VIB_MIN_LEVEL_mV; + vib->level /= 100; + } else { + vib->active = false; + vib->level = VIB_MIN_LEVEL_mV / 100; + } + + pm8xxx_vib_set(vib, vib->active); +} + +/** + * pm8xxx_vib_close - callback of input close callback + * @dev: input device pointer + * + * Turns off the vibrator. + */ +static void pm8xxx_vib_close(struct input_dev *dev) +{ + struct pm8xxx_vib *vib = input_get_drvdata(dev); + + cancel_work_sync(&vib->work); + if (vib->active) + pm8xxx_vib_set(vib, false); +} + +/** + * pm8xxx_vib_play_effect - function to handle vib effects. + * @dev: input device pointer + * @data: data of effect + * @effect: effect to play + * + * Currently this driver supports only rumble effects. + */ +static int pm8xxx_vib_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct pm8xxx_vib *vib = input_get_drvdata(dev); + + vib->speed = effect->u.rumble.strong_magnitude >> 8; + if (!vib->speed) + vib->speed = effect->u.rumble.weak_magnitude >> 9; + + schedule_work(&vib->work); + + return 0; +} + +static int __devinit pm8xxx_vib_probe(struct platform_device *pdev) + +{ + struct pm8xxx_vib *vib; + struct input_dev *input_dev; + int error; + u8 val; + + vib = kzalloc(sizeof(*vib), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!vib || !input_dev) { + dev_err(&pdev->dev, "couldn't allocate memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + INIT_WORK(&vib->work, pm8xxx_work_handler); + vib->dev = &pdev->dev; + vib->vib_input_dev = input_dev; + + /* operate in manual mode */ + error = pm8xxx_vib_read_u8(vib, &val, VIB_DRV); + if (error < 0) + goto err_free_mem; + val &= ~VIB_DRV_EN_MANUAL_MASK; + error = pm8xxx_vib_write_u8(vib, val, VIB_DRV); + if (error < 0) + goto err_free_mem; + + vib->reg_vib_drv = val; + + input_dev->name = "pm8xxx_vib_ffmemless"; + input_dev->id.version = 1; + input_dev->dev.parent = &pdev->dev; + input_dev->close = pm8xxx_vib_close; + input_set_drvdata(input_dev, vib); + input_set_capability(vib->vib_input_dev, EV_FF, FF_RUMBLE); + + error = input_ff_create_memless(input_dev, NULL, + pm8xxx_vib_play_effect); + if (error) { + dev_err(&pdev->dev, + "couldn't register vibrator as FF device\n"); + goto err_free_mem; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "couldn't register input device\n"); + goto err_destroy_memless; + } + + platform_set_drvdata(pdev, vib); + return 0; + +err_destroy_memless: + input_ff_destroy(input_dev); +err_free_mem: + input_free_device(input_dev); + kfree(vib); + + return error; +} + +static int __devexit pm8xxx_vib_remove(struct platform_device *pdev) +{ + struct pm8xxx_vib *vib = platform_get_drvdata(pdev); + + input_unregister_device(vib->vib_input_dev); + kfree(vib); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pm8xxx_vib_suspend(struct device *dev) +{ + struct pm8xxx_vib *vib = dev_get_drvdata(dev); + + /* Turn off the vibrator */ + pm8xxx_vib_set(vib, false); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL); + +static struct platform_driver pm8xxx_vib_driver = { + .probe = pm8xxx_vib_probe, + .remove = __devexit_p(pm8xxx_vib_remove), + .driver = { + .name = "pm8xxx-vib", + .owner = THIS_MODULE, + .pm = &pm8xxx_vib_pm_ops, + }, +}; + +static int __init pm8xxx_vib_init(void) +{ + return platform_driver_register(&pm8xxx_vib_driver); +} +module_init(pm8xxx_vib_init); + +static void __exit pm8xxx_vib_exit(void) +{ + platform_driver_unregister(&pm8xxx_vib_driver); +} +module_exit(pm8xxx_vib_exit); + +MODULE_ALIAS("platform:pm8xxx_vib"); +MODULE_DESCRIPTION("PMIC8xxx vibrator driver based on ff-memless framework"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Amy Maloche <amaloche@codeaurora.org>"); diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index c43002e7ec72..23855e12a30b 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -228,7 +228,7 @@ static void twl6040_vibra_close(struct input_dev *input) mutex_unlock(&info->mutex); } -#if CONFIG_PM_SLEEP +#ifdef CONFIG_PM_SLEEP static int twl6040_vibra_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 99d58764ef03..003587c71f43 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -23,13 +23,6 @@ #include "psmouse.h" #include "alps.h" -#undef DEBUG -#ifdef DEBUG -#define dbg(format, arg...) printk(KERN_INFO "alps.c: " format "\n", ## arg) -#else -#define dbg(format, arg...) do {} while (0) -#endif - #define ALPS_OLDPROTO 0x01 /* old style input */ #define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */ #define ALPS_PASS 0x04 /* device has a pass-through port */ @@ -297,10 +290,10 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) psmouse->packet[4] | psmouse->packet[5]) & 0x80) || (!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) { - dbg("refusing packet %x %x %x %x " - "(suspected interleaved ps/2)\n", - psmouse->packet[3], psmouse->packet[4], - psmouse->packet[5], psmouse->packet[6]); + psmouse_dbg(psmouse, + "refusing packet %x %x %x %x (suspected interleaved ps/2)\n", + psmouse->packet[3], psmouse->packet[4], + psmouse->packet[5], psmouse->packet[6]); return PSMOUSE_BAD_DATA; } @@ -319,13 +312,13 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) * There is also possibility that we got 6-byte ALPS * packet followed by 3-byte packet from trackpoint. We * can not distinguish between these 2 scenarios but - * becase the latter is unlikely to happen in course of + * because the latter is unlikely to happen in course of * normal operation (user would need to press all * buttons on the pad and start moving trackpoint * without touching the pad surface) we assume former. * Even if we are wrong the wost thing that would happen * the cursor would jump but we should not get protocol - * desynchronization. + * de-synchronization. */ alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3], @@ -361,10 +354,10 @@ static void alps_flush_packet(unsigned long data) if ((psmouse->packet[3] | psmouse->packet[4] | psmouse->packet[5]) & 0x80) { - dbg("refusing packet %x %x %x " - "(suspected interleaved ps/2)\n", - psmouse->packet[3], psmouse->packet[4], - psmouse->packet[5]); + psmouse_dbg(psmouse, + "refusing packet %x %x %x (suspected interleaved ps/2)\n", + psmouse->packet[3], psmouse->packet[4], + psmouse->packet[5]); } else { alps_process_packet(psmouse); } @@ -396,16 +389,18 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) } if (!alps_is_valid_first_byte(model, psmouse->packet[0])) { - dbg("refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n", - psmouse->packet[0], model->mask0, model->byte0); + psmouse_dbg(psmouse, + "refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n", + psmouse->packet[0], model->mask0, model->byte0); return PSMOUSE_BAD_DATA; } /* Bytes 2 - 6 should have 0 in the highest bit */ if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 && (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) { - dbg("refusing packet[%i] = %x\n", - psmouse->pktcnt - 1, psmouse->packet[psmouse->pktcnt - 1]); + psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", + psmouse->pktcnt - 1, + psmouse->packet[psmouse->pktcnt - 1]); return PSMOUSE_BAD_DATA; } @@ -439,7 +434,8 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) return NULL; - dbg("E6 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]); + psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x", + param[0], param[1], param[2]); if (param[0] != 0 || param[1] != 0 || (param[2] != 10 && param[2] != 100)) return NULL; @@ -459,7 +455,8 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) return NULL; - dbg("E7 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]); + psmouse_dbg(psmouse, "E7 report: %2.2x %2.2x %2.2x", + param[0], param[1], param[2]); if (version) { for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++) @@ -527,7 +524,8 @@ static int alps_get_status(struct psmouse *psmouse, char *param) ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) return -1; - dbg("Status: %2.2x %2.2x %2.2x", param[0], param[1], param[2]); + psmouse_dbg(psmouse, "Status: %2.2x %2.2x %2.2x", + param[0], param[1], param[2]); return 0; } @@ -605,12 +603,12 @@ static int alps_hw_init(struct psmouse *psmouse) } if (alps_tap_mode(psmouse, true)) { - printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n"); + psmouse_warn(psmouse, "Failed to enable hardware tapping\n"); return -1; } if (alps_absolute_mode(psmouse)) { - printk(KERN_ERR "alps.c: Failed to enable absolute mode\n"); + psmouse_err(psmouse, "Failed to enable absolute mode\n"); return -1; } @@ -621,7 +619,7 @@ static int alps_hw_init(struct psmouse *psmouse) /* ALPS needs stream mode, otherwise it won't report any data */ if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) { - printk(KERN_ERR "alps.c: Failed to enable stream mode\n"); + psmouse_err(psmouse, "Failed to enable stream mode\n"); return -1; } diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 32503565faf9..09b93b11a274 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -10,8 +10,6 @@ * Trademarks are the property of their respective owners. */ -#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt - #include <linux/delay.h> #include <linux/slab.h> #include <linux/module.h> @@ -25,13 +23,10 @@ #define elantech_debug(fmt, ...) \ do { \ if (etd->debug) \ - printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \ + psmouse_printk(KERN_DEBUG, psmouse, \ + fmt, ##__VA_ARGS__); \ } while (0) -static bool force_elantech; -module_param_named(force_elantech, force_elantech, bool, 0644); -MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default)."); - /* * Send a Synaptics style sliced query command */ @@ -40,7 +35,7 @@ static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, { if (psmouse_sliced_command(psmouse, c) || ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { - pr_err("synaptics_send_cmd query 0x%02x failed.\n", c); + psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c); return -1; } @@ -69,7 +64,7 @@ static int elantech_ps2_command(struct psmouse *psmouse, } while (tries > 0); if (rc) - pr_err("ps2 command 0x%02x failed.\n", command); + psmouse_err(psmouse, "ps2 command 0x%02x failed.\n", command); return rc; } @@ -84,7 +79,7 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg, unsigned char param[3]; int rc = 0; - if (reg < 0x10 || reg > 0x26) + if (reg < 0x07 || reg > 0x26) return -1; if (reg > 0x11 && reg < 0x20) @@ -108,12 +103,24 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg, rc = -1; } break; + + case 3 ... 4: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) { + rc = -1; + } + break; } if (rc) - pr_err("failed to read register 0x%02x.\n", reg); - else + psmouse_err(psmouse, "failed to read register 0x%02x.\n", reg); + else if (etd->hw_version != 4) *val = param[0]; + else + *val = param[1]; return rc; } @@ -127,7 +134,7 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, struct elantech_data *etd = psmouse->private; int rc = 0; - if (reg < 0x10 || reg > 0x26) + if (reg < 0x07 || reg > 0x26) return -1; if (reg > 0x11 && reg < 0x20) @@ -154,11 +161,38 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, rc = -1; } break; + + case 3: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, val) || + elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { + rc = -1; + } + break; + + case 4: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, val) || + elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { + rc = -1; + } + break; } if (rc) - pr_err("failed to write register 0x%02x with value 0x%02x.\n", - reg, val); + psmouse_err(psmouse, + "failed to write register 0x%02x with value 0x%02x.\n", + reg, val); return rc; } @@ -166,13 +200,13 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, /* * Dump a complete mouse movement packet to the syslog */ -static void elantech_packet_dump(unsigned char *packet, int size) +static void elantech_packet_dump(struct psmouse *psmouse) { int i; - printk(KERN_DEBUG pr_fmt("PS/2 packet [")); - for (i = 0; i < size; i++) - printk("%s0x%02x ", (i) ? ", " : " ", packet[i]); + psmouse_printk(KERN_DEBUG, psmouse, "PS/2 packet ["); + for (i = 0; i < psmouse->pktsize; i++) + printk("%s0x%02x ", i ? ", " : " ", psmouse->packet[i]); printk("]\n"); } @@ -223,7 +257,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) input_report_abs(dev, ABS_X, ((packet[1] & 0x0c) << 6) | packet[2]); input_report_abs(dev, ABS_Y, - ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3])); + etd->y_max - (((packet[1] & 0x03) << 8) | packet[3])); } input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); @@ -233,7 +267,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); if (etd->fw_version < 0x020000 && - (etd->capabilities & ETP_CAP_HAS_ROCKER)) { + (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) { /* rocker up */ input_report_key(dev, BTN_FORWARD, packet[0] & 0x40); /* rocker down */ @@ -273,11 +307,11 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) struct elantech_data *etd = psmouse->private; struct input_dev *dev = psmouse->dev; unsigned char *packet = psmouse->packet; - unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0, width = 0, pres = 0; + unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0; + unsigned int width = 0, pres = 0; /* byte 0: n1 n0 . . . . R L */ fingers = (packet[0] & 0xc0) >> 6; - input_report_key(dev, BTN_TOUCH, fingers != 0); switch (fingers) { case 3: @@ -290,18 +324,15 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) /* pass through... */ case 1: /* - * byte 1: . . . . . x10 x9 x8 + * byte 1: . . . . x11 x10 x9 x8 * byte 2: x7 x6 x5 x4 x4 x2 x1 x0 */ - x1 = ((packet[1] & 0x07) << 8) | packet[2]; + x1 = ((packet[1] & 0x0f) << 8) | packet[2]; /* - * byte 4: . . . . . . y9 y8 + * byte 4: . . . . y11 y10 y9 y8 * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */ - y1 = ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]); - - input_report_abs(dev, ABS_X, x1); - input_report_abs(dev, ABS_Y, y1); + y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4); width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4); @@ -314,22 +345,18 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) * byte 0: . . ay8 ax8 . . . . * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */ - x1 = ((packet[0] & 0x10) << 4) | packet[1]; + x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2; /* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */ - y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]); + y1 = etd->y_max - + ((((packet[0] & 0x20) << 3) | packet[2]) << 2); /* * byte 3: . . by8 bx8 . . . . * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */ - x2 = ((packet[3] & 0x10) << 4) | packet[4]; + x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2; /* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */ - y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]); - /* - * For compatibility with the X Synaptics driver scale up - * one coordinate and report as ordinary mouse movent - */ - input_report_abs(dev, ABS_X, x1 << 2); - input_report_abs(dev, ABS_Y, y1 << 2); + y2 = etd->y_max - + ((((packet[3] & 0x20) << 3) | packet[5]) << 2); /* Unknown so just report sensible values */ pres = 127; @@ -337,6 +364,11 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) break; } + input_report_key(dev, BTN_TOUCH, fingers != 0); + if (fingers != 0) { + input_report_abs(dev, ABS_X, x1); + input_report_abs(dev, ABS_Y, y1); + } elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); @@ -352,7 +384,208 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) input_sync(dev); } -static int elantech_check_parity_v1(struct psmouse *psmouse) +/* + * Interpret complete data packets and report absolute mode input events for + * hardware version 3. (12 byte packets for two fingers) + */ +static void elantech_report_absolute_v3(struct psmouse *psmouse, + int packet_type) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0; + unsigned int width = 0, pres = 0; + + /* byte 0: n1 n0 . . . . R L */ + fingers = (packet[0] & 0xc0) >> 6; + + switch (fingers) { + case 3: + case 1: + /* + * byte 1: . . . . x11 x10 x9 x8 + * byte 2: x7 x6 x5 x4 x4 x2 x1 x0 + */ + x1 = ((packet[1] & 0x0f) << 8) | packet[2]; + /* + * byte 4: . . . . y11 y10 y9 y8 + * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 + */ + y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); + break; + + case 2: + if (packet_type == PACKET_V3_HEAD) { + /* + * byte 1: . . . . ax11 ax10 ax9 ax8 + * byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 + */ + etd->mt[0].x = ((packet[1] & 0x0f) << 8) | packet[2]; + /* + * byte 4: . . . . ay11 ay10 ay9 ay8 + * byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 + */ + etd->mt[0].y = etd->y_max - + (((packet[4] & 0x0f) << 8) | packet[5]); + /* + * wait for next packet + */ + return; + } + + /* packet_type == PACKET_V3_TAIL */ + x1 = etd->mt[0].x; + y1 = etd->mt[0].y; + x2 = ((packet[1] & 0x0f) << 8) | packet[2]; + y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); + break; + } + + pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4); + width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4); + + input_report_key(dev, BTN_TOUCH, fingers != 0); + if (fingers != 0) { + input_report_abs(dev, ABS_X, x1); + input_report_abs(dev, ABS_Y, y1); + } + elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); + input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + input_report_abs(dev, ABS_PRESSURE, pres); + input_report_abs(dev, ABS_TOOL_WIDTH, width); + + input_sync(dev); +} + +static void elantech_input_sync_v4(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + unsigned char *packet = psmouse->packet; + + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + input_mt_report_pointer_emulation(dev, true); + input_sync(dev); +} + +static void process_packet_status_v4(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + unsigned char *packet = psmouse->packet; + unsigned fingers; + int i; + + /* notify finger state change */ + fingers = packet[1] & 0x1f; + for (i = 0; i < ETP_MAX_FINGERS; i++) { + if ((fingers & (1 << i)) == 0) { + input_mt_slot(dev, i); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, false); + } + } + + elantech_input_sync_v4(psmouse); +} + +static void process_packet_head_v4(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + int id = ((packet[3] & 0xe0) >> 5) - 1; + int pres, traces; + + if (id < 0) + return; + + etd->mt[id].x = ((packet[1] & 0x0f) << 8) | packet[2]; + etd->mt[id].y = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); + pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4); + traces = (packet[0] & 0xf0) >> 4; + + input_mt_slot(dev, id); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, true); + + input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x); + input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y); + input_report_abs(dev, ABS_MT_PRESSURE, pres); + input_report_abs(dev, ABS_MT_TOUCH_MAJOR, traces * etd->width); + /* report this for backwards compatibility */ + input_report_abs(dev, ABS_TOOL_WIDTH, traces); + + elantech_input_sync_v4(psmouse); +} + +static void process_packet_motion_v4(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + int weight, delta_x1 = 0, delta_y1 = 0, delta_x2 = 0, delta_y2 = 0; + int id, sid; + + id = ((packet[0] & 0xe0) >> 5) - 1; + if (id < 0) + return; + + sid = ((packet[3] & 0xe0) >> 5) - 1; + weight = (packet[0] & 0x10) ? ETP_WEIGHT_VALUE : 1; + /* + * Motion packets give us the delta of x, y values of specific fingers, + * but in two's complement. Let the compiler do the conversion for us. + * Also _enlarge_ the numbers to int, in case of overflow. + */ + delta_x1 = (signed char)packet[1]; + delta_y1 = (signed char)packet[2]; + delta_x2 = (signed char)packet[4]; + delta_y2 = (signed char)packet[5]; + + etd->mt[id].x += delta_x1 * weight; + etd->mt[id].y -= delta_y1 * weight; + input_mt_slot(dev, id); + input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x); + input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y); + + if (sid >= 0) { + etd->mt[sid].x += delta_x2 * weight; + etd->mt[sid].y -= delta_y2 * weight; + input_mt_slot(dev, sid); + input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[sid].x); + input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[sid].y); + } + + elantech_input_sync_v4(psmouse); +} + +static void elantech_report_absolute_v4(struct psmouse *psmouse, + int packet_type) +{ + switch (packet_type) { + case PACKET_V4_STATUS: + process_packet_status_v4(psmouse); + break; + + case PACKET_V4_HEAD: + process_packet_head_v4(psmouse); + break; + + case PACKET_V4_MOTION: + process_packet_motion_v4(psmouse); + break; + + case PACKET_UNKNOWN: + default: + /* impossible to get here */ + break; + } +} + +static int elantech_packet_check_v1(struct psmouse *psmouse) { struct elantech_data *etd = psmouse->private; unsigned char *packet = psmouse->packet; @@ -376,31 +609,142 @@ static int elantech_check_parity_v1(struct psmouse *psmouse) etd->parity[packet[3]] == p3; } +static int elantech_debounce_check_v2(struct psmouse *psmouse) +{ + /* + * When we encounter packet that matches this exactly, it means the + * hardware is in debounce status. Just ignore the whole packet. + */ + const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff, 0xff }; + unsigned char *packet = psmouse->packet; + + return !memcmp(packet, debounce_packet, sizeof(debounce_packet)); +} + +static int elantech_packet_check_v2(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + + /* + * V2 hardware has two flavors. Older ones that do not report pressure, + * and newer ones that reports pressure and width. With newer ones, all + * packets (1, 2, 3 finger touch) have the same constant bits. With + * older ones, 1/3 finger touch packets and 2 finger touch packets + * have different constant bits. + * With all three cases, if the constant bits are not exactly what I + * expected, I consider them invalid. + */ + if (etd->reports_pressure) + return (packet[0] & 0x0c) == 0x04 && + (packet[3] & 0x0f) == 0x02; + + if ((packet[0] & 0xc0) == 0x80) + return (packet[0] & 0x0c) == 0x0c && + (packet[3] & 0x0e) == 0x08; + + return (packet[0] & 0x3c) == 0x3c && + (packet[1] & 0xf0) == 0x00 && + (packet[3] & 0x3e) == 0x38 && + (packet[4] & 0xf0) == 0x00; +} + +/* + * We check the constant bits to determine what packet type we get, + * so packet checking is mandatory for v3 and later hardware. + */ +static int elantech_packet_check_v3(struct psmouse *psmouse) +{ + const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff }; + unsigned char *packet = psmouse->packet; + + /* + * check debounce first, it has the same signature in byte 0 + * and byte 3 as PACKET_V3_HEAD. + */ + if (!memcmp(packet, debounce_packet, sizeof(debounce_packet))) + return PACKET_DEBOUNCE; + + if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02) + return PACKET_V3_HEAD; + + if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c) + return PACKET_V3_TAIL; + + return PACKET_UNKNOWN; +} + +static int elantech_packet_check_v4(struct psmouse *psmouse) +{ + unsigned char *packet = psmouse->packet; + + if ((packet[0] & 0x0c) == 0x04 && + (packet[3] & 0x1f) == 0x11) + return PACKET_V4_HEAD; + + if ((packet[0] & 0x0c) == 0x04 && + (packet[3] & 0x1f) == 0x12) + return PACKET_V4_MOTION; + + if ((packet[0] & 0x0c) == 0x04 && + (packet[3] & 0x1f) == 0x10) + return PACKET_V4_STATUS; + + return PACKET_UNKNOWN; +} + /* * Process byte stream from mouse and handle complete packets */ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse) { struct elantech_data *etd = psmouse->private; + int packet_type; if (psmouse->pktcnt < psmouse->pktsize) return PSMOUSE_GOOD_DATA; if (etd->debug > 1) - elantech_packet_dump(psmouse->packet, psmouse->pktsize); + elantech_packet_dump(psmouse); switch (etd->hw_version) { case 1: - if (etd->paritycheck && !elantech_check_parity_v1(psmouse)) + if (etd->paritycheck && !elantech_packet_check_v1(psmouse)) return PSMOUSE_BAD_DATA; elantech_report_absolute_v1(psmouse); break; case 2: - /* We don't know how to check parity in protocol v2 */ + /* ignore debounce */ + if (elantech_debounce_check_v2(psmouse)) + return PSMOUSE_FULL_PACKET; + + if (etd->paritycheck && !elantech_packet_check_v2(psmouse)) + return PSMOUSE_BAD_DATA; + elantech_report_absolute_v2(psmouse); break; + + case 3: + packet_type = elantech_packet_check_v3(psmouse); + /* ignore debounce */ + if (packet_type == PACKET_DEBOUNCE) + return PSMOUSE_FULL_PACKET; + + if (packet_type == PACKET_UNKNOWN) + return PSMOUSE_BAD_DATA; + + elantech_report_absolute_v3(psmouse, packet_type); + break; + + case 4: + packet_type = elantech_packet_check_v4(psmouse); + if (packet_type == PACKET_UNKNOWN) + return PSMOUSE_BAD_DATA; + + elantech_report_absolute_v4(psmouse, packet_type); + break; } return PSMOUSE_FULL_PACKET; @@ -435,15 +779,29 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) elantech_write_reg(psmouse, 0x11, etd->reg_11) || elantech_write_reg(psmouse, 0x21, etd->reg_21)) { rc = -1; - break; } + break; + + case 3: + etd->reg_10 = 0x0b; + if (elantech_write_reg(psmouse, 0x10, etd->reg_10)) + rc = -1; + + break; + + case 4: + etd->reg_07 = 0x01; + if (elantech_write_reg(psmouse, 0x07, etd->reg_07)) + rc = -1; + + goto skip_readback_reg_10; /* v4 has no reg 0x10 to read */ } if (rc == 0) { /* * Read back reg 0x10. For hardware version 1 we must make * sure the absolute mode bit is set. For hardware version 2 - * the touchpad is probably initalising and not ready until + * the touchpad is probably initializing and not ready until * we read back the value we just wrote. */ do { @@ -456,27 +814,115 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) } while (tries > 0); if (rc) { - pr_err("failed to read back register 0x10.\n"); + psmouse_err(psmouse, + "failed to read back register 0x10.\n"); } else if (etd->hw_version == 1 && !(val & ETP_R10_ABSOLUTE_MODE)) { - pr_err("touchpad refuses to switch to absolute mode.\n"); + psmouse_err(psmouse, + "touchpad refuses to switch to absolute mode.\n"); rc = -1; } } + skip_readback_reg_10: if (rc) - pr_err("failed to initialise registers.\n"); + psmouse_err(psmouse, "failed to initialise registers.\n"); return rc; } +static int elantech_set_range(struct psmouse *psmouse, + unsigned int *x_min, unsigned int *y_min, + unsigned int *x_max, unsigned int *y_max, + unsigned int *width) +{ + struct elantech_data *etd = psmouse->private; + unsigned char param[3]; + unsigned char traces; + + switch (etd->hw_version) { + case 1: + *x_min = ETP_XMIN_V1; + *y_min = ETP_YMIN_V1; + *x_max = ETP_XMAX_V1; + *y_max = ETP_YMAX_V1; + break; + + case 2: + if (etd->fw_version == 0x020800 || + etd->fw_version == 0x020b00 || + etd->fw_version == 0x020030) { + *x_min = ETP_XMIN_V2; + *y_min = ETP_YMIN_V2; + *x_max = ETP_XMAX_V2; + *y_max = ETP_YMAX_V2; + } else { + int i; + int fixed_dpi; + + i = (etd->fw_version > 0x020800 && + etd->fw_version < 0x020900) ? 1 : 2; + + if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param)) + return -1; + + fixed_dpi = param[1] & 0x10; + + if (((etd->fw_version >> 16) == 0x14) && fixed_dpi) { + if (synaptics_send_cmd(psmouse, ETP_SAMPLE_QUERY, param)) + return -1; + + *x_max = (etd->capabilities[1] - i) * param[1] / 2; + *y_max = (etd->capabilities[2] - i) * param[2] / 2; + } else if (etd->fw_version == 0x040216) { + *x_max = 819; + *y_max = 405; + } else if (etd->fw_version == 0x040219 || etd->fw_version == 0x040215) { + *x_max = 900; + *y_max = 500; + } else { + *x_max = (etd->capabilities[1] - i) * 64; + *y_max = (etd->capabilities[2] - i) * 64; + } + } + break; + + case 3: + if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param)) + return -1; + + *x_max = (0x0f & param[0]) << 8 | param[1]; + *y_max = (0xf0 & param[0]) << 4 | param[2]; + break; + + case 4: + if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param)) + return -1; + + *x_max = (0x0f & param[0]) << 8 | param[1]; + *y_max = (0xf0 & param[0]) << 4 | param[2]; + traces = etd->capabilities[1]; + if ((traces < 2) || (traces > *x_max)) + return -1; + + *width = *x_max / (traces - 1); + break; + } + + return 0; +} + /* * Set the appropriate event bits for the input subsystem */ -static void elantech_set_input_params(struct psmouse *psmouse) +static int elantech_set_input_params(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; struct elantech_data *etd = psmouse->private; + unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0, width = 0; + + if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width)) + return -1; __set_bit(EV_KEY, dev->evbit); __set_bit(EV_ABS, dev->evbit); @@ -494,30 +940,64 @@ static void elantech_set_input_params(struct psmouse *psmouse) case 1: /* Rocker button */ if (etd->fw_version < 0x020000 && - (etd->capabilities & ETP_CAP_HAS_ROCKER)) { + (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) { __set_bit(BTN_FORWARD, dev->keybit); __set_bit(BTN_BACK, dev->keybit); } - input_set_abs_params(dev, ABS_X, ETP_XMIN_V1, ETP_XMAX_V1, 0, 0); - input_set_abs_params(dev, ABS_Y, ETP_YMIN_V1, ETP_YMAX_V1, 0, 0); + input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); + input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); break; case 2: __set_bit(BTN_TOOL_QUADTAP, dev->keybit); - input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0); - input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0); + __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); + /* fall through */ + case 3: + input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); + input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); if (etd->reports_pressure) { input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2, ETP_PMAX_V2, 0, 0); input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, ETP_WMAX_V2, 0, 0); } - __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); input_mt_init_slots(dev, 2); - input_set_abs_params(dev, ABS_MT_POSITION_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0); - input_set_abs_params(dev, ABS_MT_POSITION_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); + break; + + case 4: + __set_bit(BTN_TOOL_QUADTAP, dev->keybit); + /* For X to recognize me as touchpad. */ + input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); + input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); + /* + * range of pressure and width is the same as v2, + * report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility. + */ + input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2, + ETP_PMAX_V2, 0, 0); + input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, + ETP_WMAX_V2, 0, 0); + /* Multitouch capable pad, up to 5 fingers. */ + input_mt_init_slots(dev, ETP_MAX_FINGERS); + input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); + input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2, + ETP_PMAX_V2, 0, 0); + /* + * The firmware reports how many trace lines the finger spans, + * convert to surface unit as Protocol-B requires. + */ + input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0, + ETP_WMAX_V2 * width, 0, 0); break; } + + etd->y_max = y_max; + etd->width = width; + + return 0; } struct elantech_attr_data { @@ -587,6 +1067,7 @@ static ssize_t elantech_set_int_attr(struct psmouse *psmouse, elantech_show_int_attr, \ elantech_set_int_attr) +ELANTECH_INT_ATTR(reg_07, 0x07); ELANTECH_INT_ATTR(reg_10, 0x10); ELANTECH_INT_ATTR(reg_11, 0x11); ELANTECH_INT_ATTR(reg_20, 0x20); @@ -600,6 +1081,7 @@ ELANTECH_INT_ATTR(debug, 0); ELANTECH_INT_ATTR(paritycheck, 0); static struct attribute *elantech_attrs[] = { + &psmouse_attr_reg_07.dattr.attr, &psmouse_attr_reg_10.dattr.attr, &psmouse_attr_reg_11.dattr.attr, &psmouse_attr_reg_20.dattr.attr, @@ -651,7 +1133,7 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties) ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { - pr_debug("sending Elantech magic knock failed.\n"); + psmouse_dbg(psmouse, "sending Elantech magic knock failed.\n"); return -1; } @@ -659,9 +1141,11 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties) * Report this in case there are Elantech models that use a different * set of magic numbers */ - if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) { - pr_debug("unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n", - param[0], param[1], param[2]); + if (param[0] != 0x3c || param[1] != 0x03 || + (param[2] != 0xc8 && param[2] != 0x00)) { + psmouse_dbg(psmouse, + "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); return -1; } @@ -671,20 +1155,18 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties) * to Elantech magic knock and there might be more. */ if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) { - pr_debug("failed to query firmware version.\n"); + psmouse_dbg(psmouse, "failed to query firmware version.\n"); return -1; } - pr_debug("Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n", - param[0], param[1], param[2]); + psmouse_dbg(psmouse, + "Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); if (!elantech_is_signature_valid(param)) { - if (!force_elantech) { - pr_debug("Probably not a real Elantech touchpad. Aborting.\n"); - return -1; - } - - pr_debug("Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n"); + psmouse_dbg(psmouse, + "Probably not a real Elantech touchpad. Aborting.\n"); + return -1; } if (set_properties) { @@ -715,7 +1197,8 @@ static int elantech_reconnect(struct psmouse *psmouse) return -1; if (elantech_set_absolute_mode(psmouse)) { - pr_err("failed to put touchpad back into absolute mode.\n"); + psmouse_err(psmouse, + "failed to put touchpad back into absolute mode.\n"); return -1; } @@ -723,6 +1206,48 @@ static int elantech_reconnect(struct psmouse *psmouse) } /* + * determine hardware version and set some properties according to it. + */ +static int elantech_set_properties(struct elantech_data *etd) +{ + int ver = (etd->fw_version & 0x0f0000) >> 16; + + if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600) + etd->hw_version = 1; + else if (etd->fw_version < 0x150600) + etd->hw_version = 2; + else if (ver == 5) + etd->hw_version = 3; + else if (ver == 6) + etd->hw_version = 4; + else + return -1; + + /* + * Turn on packet checking by default. + */ + etd->paritycheck = 1; + + /* + * This firmware suffers from misreporting coordinates when + * a touch action starts causing the mouse cursor or scrolled page + * to jump. Enable a workaround. + */ + etd->jumpy_cursor = + (etd->fw_version == 0x020022 || etd->fw_version == 0x020600); + + if (etd->hw_version > 1) { + /* For now show extra debug information */ + etd->debug = 1; + + if (etd->fw_version >= 0x020800) + etd->reports_pressure = true; + } + + return 0; +} + +/* * Initialize the touchpad and create sysfs entries */ int elantech_init(struct psmouse *psmouse) @@ -743,70 +1268,53 @@ int elantech_init(struct psmouse *psmouse) * Do the version query again so we can store the result */ if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) { - pr_err("failed to query firmware version.\n"); + psmouse_err(psmouse, "failed to query firmware version.\n"); goto init_fail; } - etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2]; - /* - * Assume every version greater than this is new EeePC style - * hardware with 6 byte packets - */ - if (etd->fw_version >= 0x020030) { - etd->hw_version = 2; - /* For now show extra debug information */ - etd->debug = 1; - /* Don't know how to do parity checking for version 2 */ - etd->paritycheck = 0; - - if (etd->fw_version >= 0x020800) - etd->reports_pressure = true; - - } else { - etd->hw_version = 1; - etd->paritycheck = 1; - } - - pr_info("assuming hardware version %d, firmware version %d.%d.%d\n", - etd->hw_version, param[0], param[1], param[2]); - - if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) { - pr_err("failed to query capabilities.\n"); + if (elantech_set_properties(etd)) { + psmouse_err(psmouse, "unknown hardware version, aborting...\n"); goto init_fail; } - pr_info("Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n", - param[0], param[1], param[2]); - etd->capabilities = param[0]; + psmouse_info(psmouse, + "assuming hardware version %d (with firmware version 0x%02x%02x%02x)\n", + etd->hw_version, param[0], param[1], param[2]); - /* - * This firmware suffers from misreporting coordinates when - * a touch action starts causing the mouse cursor or scrolled page - * to jump. Enable a workaround. - */ - if (etd->fw_version == 0x020022 || etd->fw_version == 0x020600) { - pr_info("firmware version 2.0.34/2.6.0 detected, enabling jumpy cursor workaround\n"); - etd->jumpy_cursor = true; + if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, + etd->capabilities)) { + psmouse_err(psmouse, "failed to query capabilities.\n"); + goto init_fail; } + psmouse_info(psmouse, + "Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n", + etd->capabilities[0], etd->capabilities[1], + etd->capabilities[2]); if (elantech_set_absolute_mode(psmouse)) { - pr_err("failed to put touchpad into absolute mode.\n"); + psmouse_err(psmouse, + "failed to put touchpad into absolute mode.\n"); goto init_fail; } - elantech_set_input_params(psmouse); + if (elantech_set_input_params(psmouse)) { + psmouse_err(psmouse, "failed to query touchpad range.\n"); + goto init_fail; + } error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj, &elantech_attr_group); if (error) { - pr_err("failed to create sysfs attributes, error: %d.\n", error); + psmouse_err(psmouse, + "failed to create sysfs attributes, error: %d.\n", + error); goto init_fail; } psmouse->protocol_handler = elantech_process_byte; psmouse->disconnect = elantech_disconnect; psmouse->reconnect = elantech_reconnect; - psmouse->pktsize = etd->hw_version == 2 ? 6 : 4; + psmouse->pktsize = etd->hw_version > 1 ? 6 : 4; return 0; diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index fabb2b99615c..9e5f1aabea7e 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -16,14 +16,17 @@ /* * Command values for Synaptics style queries */ +#define ETP_FW_ID_QUERY 0x00 #define ETP_FW_VERSION_QUERY 0x01 #define ETP_CAPABILITIES_QUERY 0x02 +#define ETP_SAMPLE_QUERY 0x03 /* * Command values for register reading or writing */ #define ETP_REGISTER_READ 0x10 #define ETP_REGISTER_WRITE 0x11 +#define ETP_REGISTER_READWRITE 0x00 /* * Hardware version 2 custom PS/2 command value @@ -66,16 +69,13 @@ #define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1) /* - * It seems the resolution for hardware version 2 doubled. - * Hence the X and Y ranges are doubled too. - * The bezel around the pad also appears to be smaller + * The resolution for older v2 hardware doubled. + * (newer v2's firmware provides command so we can query) */ -#define ETP_EDGE_FUZZ_V2 8 - -#define ETP_XMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) -#define ETP_XMAX_V2 (1152 - ETP_EDGE_FUZZ_V2) -#define ETP_YMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) -#define ETP_YMAX_V2 ( 768 - ETP_EDGE_FUZZ_V2) +#define ETP_XMIN_V2 0 +#define ETP_XMAX_V2 1152 +#define ETP_YMIN_V2 0 +#define ETP_YMAX_V2 768 #define ETP_PMIN_V2 0 #define ETP_PMAX_V2 255 @@ -83,17 +83,37 @@ #define ETP_WMAX_V2 15 /* - * For two finger touches the coordinate of each finger gets reported - * separately but with reduced resolution. + * v3 hardware has 2 kinds of packet types, + * v4 hardware has 3. + */ +#define PACKET_UNKNOWN 0x01 +#define PACKET_DEBOUNCE 0x02 +#define PACKET_V3_HEAD 0x03 +#define PACKET_V3_TAIL 0x04 +#define PACKET_V4_HEAD 0x05 +#define PACKET_V4_MOTION 0x06 +#define PACKET_V4_STATUS 0x07 + +/* + * track up to 5 fingers for v4 hardware + */ +#define ETP_MAX_FINGERS 5 + +/* + * weight value for v4 hardware */ -#define ETP_2FT_FUZZ 4 +#define ETP_WEIGHT_VALUE 5 -#define ETP_2FT_XMIN ( 0 + ETP_2FT_FUZZ) -#define ETP_2FT_XMAX (288 - ETP_2FT_FUZZ) -#define ETP_2FT_YMIN ( 0 + ETP_2FT_FUZZ) -#define ETP_2FT_YMAX (192 - ETP_2FT_FUZZ) +/* + * The base position for one finger, v4 hardware + */ +struct finger_pos { + unsigned int x; + unsigned int y; +}; struct elantech_data { + unsigned char reg_07; unsigned char reg_10; unsigned char reg_11; unsigned char reg_20; @@ -104,13 +124,16 @@ struct elantech_data { unsigned char reg_25; unsigned char reg_26; unsigned char debug; - unsigned char capabilities; + unsigned char capabilities[3]; bool paritycheck; bool jumpy_cursor; bool reports_pressure; unsigned char hw_version; unsigned int fw_version; unsigned int single_finger_reports; + unsigned int y_max; + unsigned int width; + struct finger_pos mt[ETP_MAX_FINGERS]; unsigned char parity[256]; }; diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index 4d17d9f3320b..0470dd46b566 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -136,10 +136,10 @@ static int hgpk_discard_decay_hack(struct psmouse *psmouse, int x, int y) /* discard if too big, or half that but > 4 times the prev delta */ if (avx > recalib_delta || (avx > recalib_delta / 2 && ((avx / 4) > priv->xlast))) { - hgpk_err(psmouse, "detected %dpx jump in x\n", x); + psmouse_warn(psmouse, "detected %dpx jump in x\n", x); priv->xbigj = avx; } else if (approx_half(avx, priv->xbigj)) { - hgpk_err(psmouse, "detected secondary %dpx jump in x\n", x); + psmouse_warn(psmouse, "detected secondary %dpx jump in x\n", x); priv->xbigj = avx; priv->xsaw_secondary++; } else { @@ -151,10 +151,10 @@ static int hgpk_discard_decay_hack(struct psmouse *psmouse, int x, int y) if (avy > recalib_delta || (avy > recalib_delta / 2 && ((avy / 4) > priv->ylast))) { - hgpk_err(psmouse, "detected %dpx jump in y\n", y); + psmouse_warn(psmouse, "detected %dpx jump in y\n", y); priv->ybigj = avy; } else if (approx_half(avy, priv->ybigj)) { - hgpk_err(psmouse, "detected secondary %dpx jump in y\n", y); + psmouse_warn(psmouse, "detected secondary %dpx jump in y\n", y); priv->ybigj = avy; priv->ysaw_secondary++; } else { @@ -168,7 +168,7 @@ static int hgpk_discard_decay_hack(struct psmouse *psmouse, int x, int y) priv->ylast = avy; if (do_recal && jumpy_delay) { - hgpk_err(psmouse, "scheduling recalibration\n"); + psmouse_warn(psmouse, "scheduling recalibration\n"); psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(jumpy_delay)); } @@ -260,8 +260,8 @@ static void hgpk_spewing_hack(struct psmouse *psmouse, * movement, it is probably a case of the user moving the * cursor very slowly across the screen. */ if (abs(priv->x_tally) < 3 && abs(priv->y_tally) < 3) { - hgpk_err(psmouse, "packet spew detected (%d,%d)\n", - priv->x_tally, priv->y_tally); + psmouse_warn(psmouse, "packet spew detected (%d,%d)\n", + priv->x_tally, priv->y_tally); priv->spew_flag = RECALIBRATING; psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(spew_delay)); @@ -333,12 +333,12 @@ static bool hgpk_is_byte_valid(struct psmouse *psmouse, unsigned char *packet) } if (!valid) - hgpk_dbg(psmouse, - "bad data, mode %d (%d) %02x %02x %02x %02x %02x %02x\n", - priv->mode, pktcnt, - psmouse->packet[0], psmouse->packet[1], - psmouse->packet[2], psmouse->packet[3], - psmouse->packet[4], psmouse->packet[5]); + psmouse_dbg(psmouse, + "bad data, mode %d (%d) %02x %02x %02x %02x %02x %02x\n", + priv->mode, pktcnt, + psmouse->packet[0], psmouse->packet[1], + psmouse->packet[2], psmouse->packet[3], + psmouse->packet[4], psmouse->packet[5]); return valid; } @@ -361,19 +361,20 @@ static void hgpk_process_advanced_packet(struct psmouse *psmouse) input_report_abs(idev, ABS_PRESSURE, z); if (tpdebug) - hgpk_dbg(psmouse, "pd=%d fd=%d z=%d", - pt_down, finger_down, z); + psmouse_dbg(psmouse, "pd=%d fd=%d z=%d", + pt_down, finger_down, z); } else { /* * PenTablet mode does not report pressure, so we don't * report it here */ if (tpdebug) - hgpk_dbg(psmouse, "pd=%d ", down); + psmouse_dbg(psmouse, "pd=%d ", down); } if (tpdebug) - hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y); + psmouse_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", + left, right, x, y); input_report_key(idev, BTN_TOUCH, down); input_report_key(idev, BTN_LEFT, left); @@ -395,7 +396,7 @@ static void hgpk_process_advanced_packet(struct psmouse *psmouse) if (x == priv->abs_x && y == priv->abs_y) { if (++priv->dupe_count > SPEW_WATCH_COUNT) { if (tpdebug) - hgpk_dbg(psmouse, "hard spew detected\n"); + psmouse_dbg(psmouse, "hard spew detected\n"); priv->spew_flag = RECALIBRATING; psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(spew_delay)); @@ -412,7 +413,7 @@ static void hgpk_process_advanced_packet(struct psmouse *psmouse) int y_diff = priv->abs_y - y; if (hgpk_discard_decay_hack(psmouse, x_diff, y_diff)) { if (tpdebug) - hgpk_dbg(psmouse, "discarding\n"); + psmouse_dbg(psmouse, "discarding\n"); goto done; } hgpk_spewing_hack(psmouse, left, right, x_diff, y_diff); @@ -437,20 +438,21 @@ static void hgpk_process_simple_packet(struct psmouse *psmouse) int y = ((packet[0] << 3) & 0x100) - packet[2]; if (packet[0] & 0xc0) - hgpk_dbg(psmouse, - "overflow -- 0x%02x 0x%02x 0x%02x\n", - packet[0], packet[1], packet[2]); + psmouse_dbg(psmouse, + "overflow -- 0x%02x 0x%02x 0x%02x\n", + packet[0], packet[1], packet[2]); if (hgpk_discard_decay_hack(psmouse, x, y)) { if (tpdebug) - hgpk_dbg(psmouse, "discarding\n"); + psmouse_dbg(psmouse, "discarding\n"); return; } hgpk_spewing_hack(psmouse, left, right, x, y); if (tpdebug) - hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y); + psmouse_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", + left, right, x, y); input_report_key(dev, BTN_LEFT, left); input_report_key(dev, BTN_RIGHT, right); @@ -482,9 +484,8 @@ static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse) * ugh, got a packet inside our recalibration * window, schedule another recalibration. */ - hgpk_dbg(psmouse, - "packet inside calibration window, " - "queueing another recalibration\n"); + psmouse_dbg(psmouse, + "packet inside calibration window, queueing another recalibration\n"); psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(post_interrupt_delay)); } @@ -628,7 +629,7 @@ static int hgpk_reset_device(struct psmouse *psmouse, bool recalibrate) err = hgpk_select_mode(psmouse); if (err) { - hgpk_err(psmouse, "failed to select mode\n"); + psmouse_err(psmouse, "failed to select mode\n"); return err; } @@ -648,11 +649,11 @@ static int hgpk_force_recalibrate(struct psmouse *psmouse) return 0; if (!autorecal) { - hgpk_dbg(psmouse, "recalibrations disabled, ignoring\n"); + psmouse_dbg(psmouse, "recalibration disabled, ignoring\n"); return 0; } - hgpk_dbg(psmouse, "recalibrating touchpad..\n"); + psmouse_dbg(psmouse, "recalibrating touchpad..\n"); /* we don't want to race with the irq handler, nor with resyncs */ psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); @@ -675,7 +676,7 @@ static int hgpk_force_recalibrate(struct psmouse *psmouse) psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); if (tpdebug) - hgpk_dbg(psmouse, "touchpad reactivated\n"); + psmouse_dbg(psmouse, "touchpad reactivated\n"); /* * If we get packets right away after recalibrating, it's likely @@ -727,16 +728,16 @@ static int hgpk_toggle_powersave(struct psmouse *psmouse, int enable) err = hgpk_reset_device(psmouse, false); if (err) { - hgpk_err(psmouse, "Failed to reset device!\n"); + psmouse_err(psmouse, "Failed to reset device!\n"); return err; } /* should be all set, enable the touchpad */ ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE); psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); - hgpk_dbg(psmouse, "Touchpad powered up.\n"); + psmouse_dbg(psmouse, "Touchpad powered up.\n"); } else { - hgpk_dbg(psmouse, "Powering off touchpad.\n"); + psmouse_dbg(psmouse, "Powering off touchpad.\n"); if (ps2_command(ps2dev, NULL, 0xec) || ps2_command(ps2dev, NULL, 0xec) || @@ -923,7 +924,7 @@ static void hgpk_recalib_work(struct work_struct *work) struct psmouse *psmouse = priv->psmouse; if (hgpk_force_recalibrate(psmouse)) - hgpk_err(psmouse, "recalibration failed!\n"); + psmouse_err(psmouse, "recalibration failed!\n"); } static int hgpk_register(struct psmouse *psmouse) @@ -947,14 +948,15 @@ static int hgpk_register(struct psmouse *psmouse) err = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_powered.dattr); if (err) { - hgpk_err(psmouse, "Failed creating 'powered' sysfs node\n"); + psmouse_err(psmouse, "Failed creating 'powered' sysfs node\n"); return err; } err = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_hgpk_mode.dattr); if (err) { - hgpk_err(psmouse, "Failed creating 'hgpk_mode' sysfs node\n"); + psmouse_err(psmouse, + "Failed creating 'hgpk_mode' sysfs node\n"); goto err_remove_powered; } @@ -963,8 +965,8 @@ static int hgpk_register(struct psmouse *psmouse) err = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_recalibrate.dattr); if (err) { - hgpk_err(psmouse, - "Failed creating 'recalibrate' sysfs node\n"); + psmouse_err(psmouse, + "Failed creating 'recalibrate' sysfs node\n"); goto err_remove_mode; } } @@ -1027,13 +1029,13 @@ static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse) return -EIO; } - hgpk_dbg(psmouse, "ID: %02x %02x %02x\n", param[0], param[1], param[2]); + psmouse_dbg(psmouse, "ID: %02x %02x %02x\n", param[0], param[1], param[2]); /* HGPK signature: 0x67, 0x00, 0x<model> */ if (param[0] != 0x67 || param[1] != 0x00) return -ENODEV; - hgpk_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]); + psmouse_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]); return param[2]; } diff --git a/drivers/input/mouse/hgpk.h b/drivers/input/mouse/hgpk.h index 311c0e87fcbf..dd686771cfe0 100644 --- a/drivers/input/mouse/hgpk.h +++ b/drivers/input/mouse/hgpk.h @@ -46,17 +46,6 @@ struct hgpk_data { int xsaw_secondary, ysaw_secondary; /* jumpiness detection */ }; -#define hgpk_dbg(psmouse, format, arg...) \ - dev_dbg(&(psmouse)->ps2dev.serio->dev, format, ## arg) -#define hgpk_err(psmouse, format, arg...) \ - dev_err(&(psmouse)->ps2dev.serio->dev, format, ## arg) -#define hgpk_info(psmouse, format, arg...) \ - dev_info(&(psmouse)->ps2dev.serio->dev, format, ## arg) -#define hgpk_warn(psmouse, format, arg...) \ - dev_warn(&(psmouse)->ps2dev.serio->dev, format, ## arg) -#define hgpk_notice(psmouse, format, arg...) \ - dev_notice(&(psmouse)->ps2dev.serio->dev, format, ## arg) - #ifdef CONFIG_MOUSE_PS2_OLPC void hgpk_module_init(void); int hgpk_detect(struct psmouse *psmouse, bool set_properties); diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 83bcaba96b89..2c4db636de6c 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -169,8 +169,8 @@ static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse) if (relative_packet) { if (!dev2) - printk(KERN_WARNING "lifebook.c: got relative packet " - "but no relative device set up\n"); + psmouse_warn(psmouse, + "got relative packet but no relative device set up\n"); } else { if (lifebook_use_6byte_proto) { input_report_abs(dev1, ABS_X, @@ -212,7 +212,7 @@ static int lifebook_absolute_mode(struct psmouse *psmouse) /* * Enable absolute output -- ps2_command fails always but if - * you leave this call out the touchsreen will never send + * you leave this call out the touchscreen will never send * absolute coordinates */ param = lifebook_use_6byte_proto ? 0x08 : 0x07; diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c index c9983aee9082..faac2c3bef74 100644 --- a/drivers/input/mouse/logips2pp.c +++ b/drivers/input/mouse/logips2pp.c @@ -82,11 +82,11 @@ static psmouse_ret_t ps2pp_process_byte(struct psmouse *psmouse) packet[0] = packet[2] | 0x08; break; -#ifdef DEBUG default: - printk(KERN_WARNING "psmouse.c: Received PS2++ packet #%x, but don't know how to handle.\n", - (packet[1] >> 4) | (packet[0] & 0x30)); -#endif + psmouse_dbg(psmouse, + "Received PS2++ packet #%x, but don't know how to handle.\n", + (packet[1] >> 4) | (packet[0] & 0x30)); + break; } } else { /* Standard PS/2 motion data */ @@ -382,7 +382,7 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties) } } else { - printk(KERN_WARNING "logips2pp: Detected unknown logitech mouse model %d\n", model); + psmouse_warn(psmouse, "Detected unknown Logitech mouse model %d\n", model); } if (set_properties) { @@ -400,9 +400,9 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties) error = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_smartscroll.dattr); if (error) { - printk(KERN_ERR - "logips2pp.c: failed to create smartscroll " - "sysfs attribute, error: %d\n", error); + psmouse_err(psmouse, + "failed to create smartscroll sysfs attribute, error: %d\n", + error); return -1; } } diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 3f74baee102b..9f352fbd7b4f 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -11,6 +11,9 @@ * the Free Software Foundation. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#define psmouse_fmt(fmt) fmt + #include <linux/delay.h> #include <linux/module.h> #include <linux/slab.h> @@ -251,11 +254,14 @@ static int psmouse_handle_byte(struct psmouse *psmouse) switch (rc) { case PSMOUSE_BAD_DATA: if (psmouse->state == PSMOUSE_ACTIVATED) { - printk(KERN_WARNING "psmouse.c: %s at %s lost sync at byte %d\n", - psmouse->name, psmouse->phys, psmouse->pktcnt); + psmouse_warn(psmouse, + "%s at %s lost sync at byte %d\n", + psmouse->name, psmouse->phys, + psmouse->pktcnt); if (++psmouse->out_of_sync_cnt == psmouse->resetafter) { __psmouse_set_state(psmouse, PSMOUSE_IGNORE); - printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n"); + psmouse_notice(psmouse, + "issuing reconnect request\n"); serio_reconnect(psmouse->ps2dev.serio); return -1; } @@ -267,8 +273,9 @@ static int psmouse_handle_byte(struct psmouse *psmouse) psmouse->pktcnt = 0; if (psmouse->out_of_sync_cnt) { psmouse->out_of_sync_cnt = 0; - printk(KERN_NOTICE "psmouse.c: %s at %s - driver resynched.\n", - psmouse->name, psmouse->phys); + psmouse_notice(psmouse, + "%s at %s - driver resynced.\n", + psmouse->name, psmouse->phys); } break; @@ -295,9 +302,10 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, ((flags & SERIO_PARITY) && !psmouse->ignore_parity))) { if (psmouse->state == PSMOUSE_ACTIVATED) - printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n", - flags & SERIO_TIMEOUT ? " timeout" : "", - flags & SERIO_PARITY ? " bad parity" : ""); + psmouse_warn(psmouse, + "bad data from KBC -%s%s\n", + flags & SERIO_TIMEOUT ? " timeout" : "", + flags & SERIO_PARITY ? " bad parity" : ""); ps2_cmd_aborted(&psmouse->ps2dev); goto out; } @@ -315,8 +323,8 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, if (psmouse->state == PSMOUSE_ACTIVATED && psmouse->pktcnt && time_after(jiffies, psmouse->last + HZ/2)) { - printk(KERN_INFO "psmouse.c: %s at %s lost synchronization, throwing %d bytes away.\n", - psmouse->name, psmouse->phys, psmouse->pktcnt); + psmouse_info(psmouse, "%s at %s lost synchronization, throwing %d bytes away.\n", + psmouse->name, psmouse->phys, psmouse->pktcnt); psmouse->badbyte = psmouse->packet[0]; __psmouse_set_state(psmouse, PSMOUSE_RESYNCING); psmouse_queue_work(psmouse, &psmouse->resync_work, 0); @@ -943,7 +951,8 @@ static int psmouse_probe(struct psmouse *psmouse) */ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS)) - printk(KERN_WARNING "psmouse.c: Failed to reset mouse on %s\n", ps2dev->serio->phys); + psmouse_warn(psmouse, "Failed to reset mouse on %s\n", + ps2dev->serio->phys); return 0; } @@ -1005,8 +1014,8 @@ static void psmouse_initialize(struct psmouse *psmouse) static void psmouse_activate(struct psmouse *psmouse) { if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) - printk(KERN_WARNING "psmouse.c: Failed to enable mouse on %s\n", - psmouse->ps2dev.serio->phys); + psmouse_warn(psmouse, "Failed to enable mouse on %s\n", + psmouse->ps2dev.serio->phys); psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); } @@ -1020,14 +1029,14 @@ static void psmouse_activate(struct psmouse *psmouse) static void psmouse_deactivate(struct psmouse *psmouse) { if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) - printk(KERN_WARNING "psmouse.c: Failed to deactivate mouse on %s\n", - psmouse->ps2dev.serio->phys); + psmouse_warn(psmouse, "Failed to deactivate mouse on %s\n", + psmouse->ps2dev.serio->phys); psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); } /* - * psmouse_poll() - default poll hanlder. Everyone except for ALPS uses it. + * psmouse_poll() - default poll handler. Everyone except for ALPS uses it. */ static int psmouse_poll(struct psmouse *psmouse) @@ -1115,14 +1124,15 @@ static void psmouse_resync(struct work_struct *work) } if (!enabled) { - printk(KERN_WARNING "psmouse.c: failed to re-enable mouse on %s\n", - psmouse->ps2dev.serio->phys); + psmouse_warn(psmouse, "failed to re-enable mouse on %s\n", + psmouse->ps2dev.serio->phys); failed = true; } if (failed) { psmouse_set_state(psmouse, PSMOUSE_IGNORE); - printk(KERN_INFO "psmouse.c: resync failed, issuing reconnect request\n"); + psmouse_info(psmouse, + "resync failed, issuing reconnect request\n"); serio_reconnect(serio); } else psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); @@ -1155,8 +1165,8 @@ static void psmouse_cleanup(struct serio *serio) * Disable stream mode so cleanup routine can proceed undisturbed. */ if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) - printk(KERN_WARNING "psmouse.c: Failed to disable mouse on %s\n", - psmouse->ps2dev.serio->phys); + psmouse_warn(psmouse, "Failed to disable mouse on %s\n", + psmouse->ps2dev.serio->phys); if (psmouse->cleanup) psmouse->cleanup(psmouse); @@ -1400,7 +1410,8 @@ static int psmouse_reconnect(struct serio *serio) int rc = -1; if (!drv || !psmouse) { - printk(KERN_DEBUG "psmouse: reconnect request, but serio is disconnected, ignoring...\n"); + psmouse_dbg(psmouse, + "reconnect request, but serio is disconnected, ignoring...\n"); return -1; } @@ -1427,8 +1438,9 @@ static int psmouse_reconnect(struct serio *serio) goto out; } - /* ok, the device type (and capabilities) match the old one, - * we can continue using it, complete intialization + /* + * OK, the device type (and capabilities) match the old one, + * we can continue using it, complete initialization */ psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); @@ -1586,9 +1598,8 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co while (!list_empty(&serio->children)) { if (++retry > 3) { - printk(KERN_WARNING - "psmouse: failed to destroy children ports, " - "protocol change aborted.\n"); + psmouse_warn(psmouse, + "failed to destroy children ports, protocol change aborted.\n"); input_free_device(new_dev); return -EIO; } @@ -1715,7 +1726,7 @@ static int __init psmouse_init(void) kpsmoused_wq = create_singlethread_workqueue("kpsmoused"); if (!kpsmoused_wq) { - printk(KERN_ERR "psmouse: failed to create kpsmoused workqueue\n"); + pr_err("failed to create kpsmoused workqueue\n"); return -ENOMEM; } diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 593e910bfc7a..9b84b0c4e371 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -150,4 +150,29 @@ static struct psmouse_attribute psmouse_attr_##_name = { \ static ssize_t _set(struct psmouse *, void *, const char *, size_t); \ __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, NULL, _set, true) +#ifndef psmouse_fmt +#define psmouse_fmt(fmt) KBUILD_BASENAME ": " fmt +#endif + +#define psmouse_dbg(psmouse, format, ...) \ + dev_dbg(&(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) +#define psmouse_info(psmouse, format, ...) \ + dev_info(&(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) +#define psmouse_warn(psmouse, format, ...) \ + dev_warn(&(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) +#define psmouse_err(psmouse, format, ...) \ + dev_err(&(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) +#define psmouse_notice(psmouse, format, ...) \ + dev_notice(&(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) +#define psmouse_printk(level, psmouse, format, ...) \ + dev_printk(level, \ + &(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) + + #endif /* _PSMOUSE_H */ diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c index 6c5d84fcdea1..ee3b0ca9d592 100644 --- a/drivers/input/mouse/pxa930_trkball.c +++ b/drivers/input/mouse/pxa930_trkball.c @@ -183,7 +183,7 @@ static int __devinit pxa930_trkball_probe(struct platform_device *pdev) /* held the module in reset, will be enabled in open() */ pxa930_trkball_disable(trkball); - error = request_irq(irq, pxa930_trkball_interrupt, IRQF_DISABLED, + error = request_irq(irq, pxa930_trkball_interrupt, 0, pdev->name, trkball); if (error) { dev_err(&pdev->dev, "failed to request irq: %d\n", error); diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 2fc887a51066..c5b12d2e955a 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -607,11 +607,12 @@ static void fsp_packet_debug(unsigned char packet[]) ps2_packet_cnt++; jiffies_msec = jiffies_to_msecs(jiffies); - printk(KERN_DEBUG "%08dms PS/2 packets: %02x, %02x, %02x, %02x\n", - jiffies_msec, packet[0], packet[1], packet[2], packet[3]); + psmouse_dbg(psmouse, + "%08dms PS/2 packets: %02x, %02x, %02x, %02x\n", + jiffies_msec, packet[0], packet[1], packet[2], packet[3]); if (jiffies_msec - ps2_last_second > 1000) { - printk(KERN_DEBUG "PS/2 packets/sec = %d\n", ps2_packet_cnt); + psmouse_dbg(psmouse, "PS/2 packets/sec = %d\n", ps2_packet_cnt); ps2_packet_cnt = 0; ps2_last_second = jiffies_msec; } @@ -820,9 +821,9 @@ int fsp_init(struct psmouse *psmouse) return -ENODEV; } - printk(KERN_INFO - "Finger Sensing Pad, hw: %d.%d.%d, sw: %s, buttons: %d\n", - ver >> 4, ver & 0x0F, rev, fsp_drv_ver, buttons & 7); + psmouse_info(psmouse, + "Finger Sensing Pad, hw: %d.%d.%d, sw: %s, buttons: %d\n", + ver >> 4, ver & 0x0F, rev, fsp_drv_ver, buttons & 7); psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL); if (!priv) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 5538fc657af1..c080b828e5dc 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -44,6 +44,16 @@ #define YMIN_NOMINAL 1408 #define YMAX_NOMINAL 4448 +/* + * Synaptics touchpads report the y coordinate from bottom to top, which is + * opposite from what userspace expects. + * This function is used to invert y before reporting. + */ +static int synaptics_invert_y(int y) +{ + return YMAX_NOMINAL + YMIN_NOMINAL - y; +} + /***************************************************************************** * Stuff we need even when we do not want native Synaptics support @@ -157,8 +167,8 @@ static int synaptics_capability(struct psmouse *psmouse) if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) { if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) { - printk(KERN_ERR "Synaptics claims to have extended capabilities," - " but I'm not able to read them.\n"); + psmouse_warn(psmouse, + "device claims to have extended capabilities, but I'm not able to read them.\n"); } else { priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2]; @@ -173,8 +183,8 @@ static int synaptics_capability(struct psmouse *psmouse) if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) { if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) { - printk(KERN_ERR "Synaptics claims to have extended capability 0x0c," - " but I'm not able to read it.\n"); + psmouse_warn(psmouse, + "device claims to have extended capability 0x0c, but I'm not able to read it.\n"); } else { priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2]; } @@ -222,8 +232,8 @@ static int synaptics_resolution(struct psmouse *psmouse) if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 && SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) { if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MAX_COORDS, resp)) { - printk(KERN_ERR "Synaptics claims to have max coordinates" - " query, but I'm not able to read it.\n"); + psmouse_warn(psmouse, + "device claims to have max coordinates query, but I'm not able to read it.\n"); } else { priv->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); priv->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); @@ -233,8 +243,8 @@ static int synaptics_resolution(struct psmouse *psmouse) if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 && SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c)) { if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) { - printk(KERN_ERR "Synaptics claims to have min coordinates" - " query, but I'm not able to read it.\n"); + psmouse_warn(psmouse, + "device claims to have min coordinates query, but I'm not able to read it.\n"); } else { priv->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); priv->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); @@ -294,7 +304,8 @@ static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse) static unsigned char param = 0xc8; struct synaptics_data *priv = psmouse->private; - if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) + if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) || + SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c))) return 0; if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL)) @@ -377,7 +388,8 @@ static void synaptics_pt_activate(struct psmouse *psmouse) priv->mode &= ~SYN_BIT_FOUR_BYTE_CLIENT; if (synaptics_mode_cmd(psmouse, priv->mode)) - printk(KERN_INFO "synaptics: failed to switch guest protocol\n"); + psmouse_warn(psmouse, + "failed to switch guest protocol\n"); } } @@ -387,7 +399,8 @@ static void synaptics_pt_create(struct psmouse *psmouse) serio = kzalloc(sizeof(struct serio), GFP_KERNEL); if (!serio) { - printk(KERN_ERR "synaptics: not enough memory to allocate pass-through port\n"); + psmouse_err(psmouse, + "not enough memory for pass-through port\n"); return; } @@ -401,7 +414,8 @@ static void synaptics_pt_create(struct psmouse *psmouse) psmouse->pt_activate = synaptics_pt_activate; - printk(KERN_INFO "serio: %s port at %s\n", serio->name, psmouse->phys); + psmouse_info(psmouse, "serio: %s port at %s\n", + serio->name, psmouse->phys); serio_register_port(serio); } @@ -409,6 +423,44 @@ static void synaptics_pt_create(struct psmouse *psmouse) * Functions to interpret the absolute mode packets ****************************************************************************/ +static void synaptics_mt_state_set(struct synaptics_mt_state *state, int count, + int sgm, int agm) +{ + state->count = count; + state->sgm = sgm; + state->agm = agm; +} + +static void synaptics_parse_agm(const unsigned char buf[], + struct synaptics_data *priv, + struct synaptics_hw_state *hw) +{ + struct synaptics_hw_state *agm = &priv->agm; + int agm_packet_type; + + agm_packet_type = (buf[5] & 0x30) >> 4; + switch (agm_packet_type) { + case 1: + /* Gesture packet: (x, y, z) half resolution */ + agm->w = hw->w; + agm->x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1; + agm->y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1; + agm->z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1; + break; + + case 2: + /* AGM-CONTACT packet: (count, sgm, agm) */ + synaptics_mt_state_set(&agm->mt_state, buf[1], buf[2], buf[4]); + break; + + default: + break; + } + + /* Record that at least one AGM has been received since last SGM */ + priv->agm_pending = true; +} + static int synaptics_parse_hw_state(const unsigned char buf[], struct synaptics_data *priv, struct synaptics_hw_state *hw) @@ -442,11 +494,10 @@ static int synaptics_parse_hw_state(const unsigned char buf[], hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0; } - if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) { - /* Gesture packet: (x, y, z) at half resolution */ - priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1; - priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1; - priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1; + if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) || + SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) && + hw->w == 2) { + synaptics_parse_agm(buf, priv, hw); return 1; } @@ -502,8 +553,7 @@ static void synaptics_report_semi_mt_slot(struct input_dev *dev, int slot, input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); if (active) { input_report_abs(dev, ABS_MT_POSITION_X, x); - input_report_abs(dev, ABS_MT_POSITION_Y, - YMAX_NOMINAL + YMIN_NOMINAL - y); + input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(y)); } } @@ -526,6 +576,388 @@ static void synaptics_report_semi_mt_data(struct input_dev *dev, } } +static void synaptics_report_buttons(struct psmouse *psmouse, + const struct synaptics_hw_state *hw) +{ + struct input_dev *dev = psmouse->dev; + struct synaptics_data *priv = psmouse->private; + int i; + + input_report_key(dev, BTN_LEFT, hw->left); + input_report_key(dev, BTN_RIGHT, hw->right); + + if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) + input_report_key(dev, BTN_MIDDLE, hw->middle); + + if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) { + input_report_key(dev, BTN_FORWARD, hw->up); + input_report_key(dev, BTN_BACK, hw->down); + } + + for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++) + input_report_key(dev, BTN_0 + i, hw->ext_buttons & (1 << i)); +} + +static void synaptics_report_slot(struct input_dev *dev, int slot, + const struct synaptics_hw_state *hw) +{ + input_mt_slot(dev, slot); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, (hw != NULL)); + if (!hw) + return; + + input_report_abs(dev, ABS_MT_POSITION_X, hw->x); + input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(hw->y)); + input_report_abs(dev, ABS_MT_PRESSURE, hw->z); +} + +static void synaptics_report_mt_data(struct psmouse *psmouse, + struct synaptics_mt_state *mt_state, + const struct synaptics_hw_state *sgm) +{ + struct input_dev *dev = psmouse->dev; + struct synaptics_data *priv = psmouse->private; + struct synaptics_hw_state *agm = &priv->agm; + struct synaptics_mt_state *old = &priv->mt_state; + + switch (mt_state->count) { + case 0: + synaptics_report_slot(dev, 0, NULL); + synaptics_report_slot(dev, 1, NULL); + break; + case 1: + if (mt_state->sgm == -1) { + synaptics_report_slot(dev, 0, NULL); + synaptics_report_slot(dev, 1, NULL); + } else if (mt_state->sgm == 0) { + synaptics_report_slot(dev, 0, sgm); + synaptics_report_slot(dev, 1, NULL); + } else { + synaptics_report_slot(dev, 0, NULL); + synaptics_report_slot(dev, 1, sgm); + } + break; + default: + /* + * If the finger slot contained in SGM is valid, and either + * hasn't changed, or is new, then report SGM in MTB slot 0. + * Otherwise, empty MTB slot 0. + */ + if (mt_state->sgm != -1 && + (mt_state->sgm == old->sgm || old->sgm == -1)) + synaptics_report_slot(dev, 0, sgm); + else + synaptics_report_slot(dev, 0, NULL); + + /* + * If the finger slot contained in AGM is valid, and either + * hasn't changed, or is new, then report AGM in MTB slot 1. + * Otherwise, empty MTB slot 1. + */ + if (mt_state->agm != -1 && + (mt_state->agm == old->agm || old->agm == -1)) + synaptics_report_slot(dev, 1, agm); + else + synaptics_report_slot(dev, 1, NULL); + break; + } + + /* Don't use active slot count to generate BTN_TOOL events. */ + input_mt_report_pointer_emulation(dev, false); + + /* Send the number of fingers reported by touchpad itself. */ + input_mt_report_finger_count(dev, mt_state->count); + + synaptics_report_buttons(psmouse, sgm); + + input_sync(dev); +} + +/* Handle case where mt_state->count = 0 */ +static void synaptics_image_sensor_0f(struct synaptics_data *priv, + struct synaptics_mt_state *mt_state) +{ + synaptics_mt_state_set(mt_state, 0, -1, -1); + priv->mt_state_lost = false; +} + +/* Handle case where mt_state->count = 1 */ +static void synaptics_image_sensor_1f(struct synaptics_data *priv, + struct synaptics_mt_state *mt_state) +{ + struct synaptics_hw_state *agm = &priv->agm; + struct synaptics_mt_state *old = &priv->mt_state; + + /* + * If the last AGM was (0,0,0), and there is only one finger left, + * then we absolutely know that SGM contains slot 0, and all other + * fingers have been removed. + */ + if (priv->agm_pending && agm->z == 0) { + synaptics_mt_state_set(mt_state, 1, 0, -1); + priv->mt_state_lost = false; + return; + } + + switch (old->count) { + case 0: + synaptics_mt_state_set(mt_state, 1, 0, -1); + break; + case 1: + /* + * If mt_state_lost, then the previous transition was 3->1, + * and SGM now contains either slot 0 or 1, but we don't know + * which. So, we just assume that the SGM now contains slot 1. + * + * If pending AGM and either: + * (a) the previous SGM slot contains slot 0, or + * (b) there was no SGM slot + * then, the SGM now contains slot 1 + * + * Case (a) happens with very rapid "drum roll" gestures, where + * slot 0 finger is lifted and a new slot 1 finger touches + * within one reporting interval. + * + * Case (b) happens if initially two or more fingers tap + * briefly, and all but one lift before the end of the first + * reporting interval. + * + * (In both these cases, slot 0 will becomes empty, so SGM + * contains slot 1 with the new finger) + * + * Else, if there was no previous SGM, it now contains slot 0. + * + * Otherwise, SGM still contains the same slot. + */ + if (priv->mt_state_lost || + (priv->agm_pending && old->sgm <= 0)) + synaptics_mt_state_set(mt_state, 1, 1, -1); + else if (old->sgm == -1) + synaptics_mt_state_set(mt_state, 1, 0, -1); + break; + case 2: + /* + * If mt_state_lost, we don't know which finger SGM contains. + * + * So, report 1 finger, but with both slots empty. + * We will use slot 1 on subsequent 1->1 + */ + if (priv->mt_state_lost) { + synaptics_mt_state_set(mt_state, 1, -1, -1); + break; + } + /* + * Since the last AGM was NOT (0,0,0), it was the finger in + * slot 0 that has been removed. + * So, SGM now contains previous AGM's slot, and AGM is now + * empty. + */ + synaptics_mt_state_set(mt_state, 1, old->agm, -1); + break; + case 3: + /* + * Since last AGM was not (0,0,0), we don't know which finger + * is left. + * + * So, report 1 finger, but with both slots empty. + * We will use slot 1 on subsequent 1->1 + */ + synaptics_mt_state_set(mt_state, 1, -1, -1); + priv->mt_state_lost = true; + break; + case 4: + case 5: + /* mt_state was updated by AGM-CONTACT packet */ + break; + } +} + +/* Handle case where mt_state->count = 2 */ +static void synaptics_image_sensor_2f(struct synaptics_data *priv, + struct synaptics_mt_state *mt_state) +{ + struct synaptics_mt_state *old = &priv->mt_state; + + switch (old->count) { + case 0: + synaptics_mt_state_set(mt_state, 2, 0, 1); + break; + case 1: + /* + * If previous SGM contained slot 1 or higher, SGM now contains + * slot 0 (the newly touching finger) and AGM contains SGM's + * previous slot. + * + * Otherwise, SGM still contains slot 0 and AGM now contains + * slot 1. + */ + if (old->sgm >= 1) + synaptics_mt_state_set(mt_state, 2, 0, old->sgm); + else + synaptics_mt_state_set(mt_state, 2, 0, 1); + break; + case 2: + /* + * If mt_state_lost, SGM now contains either finger 1 or 2, but + * we don't know which. + * So, we just assume that the SGM contains slot 0 and AGM 1. + */ + if (priv->mt_state_lost) + synaptics_mt_state_set(mt_state, 2, 0, 1); + /* + * Otherwise, use the same mt_state, since it either hasn't + * changed, or was updated by a recently received AGM-CONTACT + * packet. + */ + break; + case 3: + /* + * 3->2 transitions have two unsolvable problems: + * 1) no indication is given which finger was removed + * 2) no way to tell if agm packet was for finger 3 + * before 3->2, or finger 2 after 3->2. + * + * So, report 2 fingers, but empty all slots. + * We will guess slots [0,1] on subsequent 2->2. + */ + synaptics_mt_state_set(mt_state, 2, -1, -1); + priv->mt_state_lost = true; + break; + case 4: + case 5: + /* mt_state was updated by AGM-CONTACT packet */ + break; + } +} + +/* Handle case where mt_state->count = 3 */ +static void synaptics_image_sensor_3f(struct synaptics_data *priv, + struct synaptics_mt_state *mt_state) +{ + struct synaptics_mt_state *old = &priv->mt_state; + + switch (old->count) { + case 0: + synaptics_mt_state_set(mt_state, 3, 0, 2); + break; + case 1: + /* + * If previous SGM contained slot 2 or higher, SGM now contains + * slot 0 (one of the newly touching fingers) and AGM contains + * SGM's previous slot. + * + * Otherwise, SGM now contains slot 0 and AGM contains slot 2. + */ + if (old->sgm >= 2) + synaptics_mt_state_set(mt_state, 3, 0, old->sgm); + else + synaptics_mt_state_set(mt_state, 3, 0, 2); + break; + case 2: + /* + * If the AGM previously contained slot 3 or higher, then the + * newly touching finger is in the lowest available slot. + * + * If SGM was previously 1 or higher, then the new SGM is + * now slot 0 (with a new finger), otherwise, the new finger + * is now in a hidden slot between 0 and AGM's slot. + * + * In all such cases, the SGM now contains slot 0, and the AGM + * continues to contain the same slot as before. + */ + if (old->agm >= 3) { + synaptics_mt_state_set(mt_state, 3, 0, old->agm); + break; + } + + /* + * After some 3->1 and all 3->2 transitions, we lose track + * of which slot is reported by SGM and AGM. + * + * For 2->3 in this state, report 3 fingers, but empty all + * slots, and we will guess (0,2) on a subsequent 0->3. + * + * To userspace, the resulting transition will look like: + * 2:[0,1] -> 3:[-1,-1] -> 3:[0,2] + */ + if (priv->mt_state_lost) { + synaptics_mt_state_set(mt_state, 3, -1, -1); + break; + } + + /* + * If the (SGM,AGM) really previously contained slots (0, 1), + * then we cannot know what slot was just reported by the AGM, + * because the 2->3 transition can occur either before or after + * the AGM packet. Thus, this most recent AGM could contain + * either the same old slot 1 or the new slot 2. + * Subsequent AGMs will be reporting slot 2. + * + * To userspace, the resulting transition will look like: + * 2:[0,1] -> 3:[0,-1] -> 3:[0,2] + */ + synaptics_mt_state_set(mt_state, 3, 0, -1); + break; + case 3: + /* + * If, for whatever reason, the previous agm was invalid, + * Assume SGM now contains slot 0, AGM now contains slot 2. + */ + if (old->agm <= 2) + synaptics_mt_state_set(mt_state, 3, 0, 2); + /* + * mt_state either hasn't changed, or was updated by a recently + * received AGM-CONTACT packet. + */ + break; + + case 4: + case 5: + /* mt_state was updated by AGM-CONTACT packet */ + break; + } +} + +/* Handle case where mt_state->count = 4, or = 5 */ +static void synaptics_image_sensor_45f(struct synaptics_data *priv, + struct synaptics_mt_state *mt_state) +{ + /* mt_state was updated correctly by AGM-CONTACT packet */ + priv->mt_state_lost = false; +} + +static void synaptics_image_sensor_process(struct psmouse *psmouse, + struct synaptics_hw_state *sgm) +{ + struct synaptics_data *priv = psmouse->private; + struct synaptics_hw_state *agm = &priv->agm; + struct synaptics_mt_state mt_state; + + /* Initialize using current mt_state (as updated by last agm) */ + mt_state = agm->mt_state; + + /* + * Update mt_state using the new finger count and current mt_state. + */ + if (sgm->z == 0) + synaptics_image_sensor_0f(priv, &mt_state); + else if (sgm->w >= 4) + synaptics_image_sensor_1f(priv, &mt_state); + else if (sgm->w == 0) + synaptics_image_sensor_2f(priv, &mt_state); + else if (sgm->w == 1 && mt_state.count <= 3) + synaptics_image_sensor_3f(priv, &mt_state); + else + synaptics_image_sensor_45f(priv, &mt_state); + + /* Send resulting input events to user space */ + synaptics_report_mt_data(psmouse, &mt_state, sgm); + + /* Store updated mt_state */ + priv->mt_state = agm->mt_state = mt_state; + priv->agm_pending = false; +} + /* * called for each full received packet from the touchpad */ @@ -536,11 +968,15 @@ static void synaptics_process_packet(struct psmouse *psmouse) struct synaptics_hw_state hw; int num_fingers; int finger_width; - int i; if (synaptics_parse_hw_state(psmouse->packet, priv, &hw)) return; + if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) { + synaptics_image_sensor_process(psmouse, &hw); + return; + } + if (hw.scroll) { priv->scroll += hw.scroll; @@ -586,7 +1022,8 @@ static void synaptics_process_packet(struct psmouse *psmouse) } if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) - synaptics_report_semi_mt_data(dev, &hw, &priv->mt, num_fingers); + synaptics_report_semi_mt_data(dev, &hw, &priv->agm, + num_fingers); /* Post events * BTN_TOUCH has to be first as mousedev relies on it when doing @@ -597,7 +1034,7 @@ static void synaptics_process_packet(struct psmouse *psmouse) if (num_fingers > 0) { input_report_abs(dev, ABS_X, hw.x); - input_report_abs(dev, ABS_Y, YMAX_NOMINAL + YMIN_NOMINAL - hw.y); + input_report_abs(dev, ABS_Y, synaptics_invert_y(hw.y)); } input_report_abs(dev, ABS_PRESSURE, hw.z); @@ -605,35 +1042,25 @@ static void synaptics_process_packet(struct psmouse *psmouse) input_report_abs(dev, ABS_TOOL_WIDTH, finger_width); input_report_key(dev, BTN_TOOL_FINGER, num_fingers == 1); - input_report_key(dev, BTN_LEFT, hw.left); - input_report_key(dev, BTN_RIGHT, hw.right); - if (SYN_CAP_MULTIFINGER(priv->capabilities)) { input_report_key(dev, BTN_TOOL_DOUBLETAP, num_fingers == 2); input_report_key(dev, BTN_TOOL_TRIPLETAP, num_fingers == 3); } - if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) - input_report_key(dev, BTN_MIDDLE, hw.middle); - - if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) { - input_report_key(dev, BTN_FORWARD, hw.up); - input_report_key(dev, BTN_BACK, hw.down); - } - - for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++) - input_report_key(dev, BTN_0 + i, hw.ext_buttons & (1 << i)); + synaptics_report_buttons(psmouse, &hw); input_sync(dev); } -static int synaptics_validate_byte(unsigned char packet[], int idx, unsigned char pkt_type) +static int synaptics_validate_byte(struct psmouse *psmouse, + int idx, unsigned char pkt_type) { static const unsigned char newabs_mask[] = { 0xC8, 0x00, 0x00, 0xC8, 0x00 }; static const unsigned char newabs_rel_mask[] = { 0xC0, 0x00, 0x00, 0xC0, 0x00 }; static const unsigned char newabs_rslt[] = { 0x80, 0x00, 0x00, 0xC0, 0x00 }; static const unsigned char oldabs_mask[] = { 0xC0, 0x60, 0x00, 0xC0, 0x60 }; static const unsigned char oldabs_rslt[] = { 0xC0, 0x00, 0x00, 0x80, 0x00 }; + const char *packet = psmouse->packet; if (idx < 0 || idx > 4) return 0; @@ -651,7 +1078,7 @@ static int synaptics_validate_byte(unsigned char packet[], int idx, unsigned cha return (packet[idx] & oldabs_mask[idx]) == oldabs_rslt[idx]; default: - printk(KERN_ERR "synaptics: unknown packet type %d\n", pkt_type); + psmouse_err(psmouse, "unknown packet type %d\n", pkt_type); return 0; } } @@ -661,8 +1088,8 @@ static unsigned char synaptics_detect_pkt_type(struct psmouse *psmouse) int i; for (i = 0; i < 5; i++) - if (!synaptics_validate_byte(psmouse->packet, i, SYN_NEWABS_STRICT)) { - printk(KERN_INFO "synaptics: using relaxed packet validation\n"); + if (!synaptics_validate_byte(psmouse, i, SYN_NEWABS_STRICT)) { + psmouse_info(psmouse, "using relaxed packet validation\n"); return SYN_NEWABS_RELAXED; } @@ -687,46 +1114,56 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse) return PSMOUSE_FULL_PACKET; } - return synaptics_validate_byte(psmouse->packet, psmouse->pktcnt - 1, priv->pkt_type) ? + return synaptics_validate_byte(psmouse, psmouse->pktcnt - 1, priv->pkt_type) ? PSMOUSE_GOOD_DATA : PSMOUSE_BAD_DATA; } /***************************************************************************** * Driver initialization/cleanup functions ****************************************************************************/ -static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) +static void set_abs_position_params(struct input_dev *dev, + struct synaptics_data *priv, int x_code, + int y_code) { - int i; + int x_min = priv->x_min ?: XMIN_NOMINAL; + int x_max = priv->x_max ?: XMAX_NOMINAL; + int y_min = priv->y_min ?: YMIN_NOMINAL; + int y_max = priv->y_max ?: YMAX_NOMINAL; int fuzz = SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c) ? SYN_REDUCED_FILTER_FUZZ : 0; + input_set_abs_params(dev, x_code, x_min, x_max, fuzz, 0); + input_set_abs_params(dev, y_code, y_min, y_max, fuzz, 0); + input_abs_set_res(dev, x_code, priv->x_res); + input_abs_set_res(dev, y_code, priv->y_res); +} + +static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) +{ + int i; + __set_bit(INPUT_PROP_POINTER, dev->propbit); __set_bit(EV_ABS, dev->evbit); - input_set_abs_params(dev, ABS_X, - priv->x_min ?: XMIN_NOMINAL, - priv->x_max ?: XMAX_NOMINAL, - fuzz, 0); - input_set_abs_params(dev, ABS_Y, - priv->y_min ?: YMIN_NOMINAL, - priv->y_max ?: YMAX_NOMINAL, - fuzz, 0); + set_abs_position_params(dev, priv, ABS_X, ABS_Y); input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); - if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) { + if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) { + input_mt_init_slots(dev, 2); + set_abs_position_params(dev, priv, ABS_MT_POSITION_X, + ABS_MT_POSITION_Y); + /* Image sensors can report per-contact pressure */ + input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0); + + /* Image sensors can signal 4 and 5 finger clicks */ + __set_bit(BTN_TOOL_QUADTAP, dev->keybit); + __set_bit(BTN_TOOL_QUINTTAP, dev->keybit); + } else if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) { + /* Non-image sensors with AGM use semi-mt */ __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); input_mt_init_slots(dev, 2); - input_set_abs_params(dev, ABS_MT_POSITION_X, - priv->x_min ?: XMIN_NOMINAL, - priv->x_max ?: XMAX_NOMINAL, - fuzz, 0); - input_set_abs_params(dev, ABS_MT_POSITION_Y, - priv->y_min ?: YMIN_NOMINAL, - priv->y_max ?: YMAX_NOMINAL, - fuzz, 0); - - input_abs_set_res(dev, ABS_MT_POSITION_X, priv->x_res); - input_abs_set_res(dev, ABS_MT_POSITION_Y, priv->y_res); + set_abs_position_params(dev, priv, ABS_MT_POSITION_X, + ABS_MT_POSITION_Y); } if (SYN_CAP_PALMDETECT(priv->capabilities)) @@ -759,9 +1196,6 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) __clear_bit(REL_X, dev->relbit); __clear_bit(REL_Y, dev->relbit); - input_abs_set_res(dev, ABS_X, priv->x_res); - input_abs_set_res(dev, ABS_Y, priv->y_res); - if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) { __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); /* Clickpads report only left button */ @@ -793,21 +1227,21 @@ static int synaptics_reconnect(struct psmouse *psmouse) return -1; if (retry > 1) - printk(KERN_DEBUG "Synaptics reconnected after %d tries\n", - retry); + psmouse_dbg(psmouse, "reconnected after %d tries\n", retry); if (synaptics_query_hardware(psmouse)) { - printk(KERN_ERR "Unable to query Synaptics hardware.\n"); + psmouse_err(psmouse, "Unable to query device.\n"); return -1; } if (synaptics_set_absolute_mode(psmouse)) { - printk(KERN_ERR "Unable to initialize Synaptics hardware.\n"); + psmouse_err(psmouse, "Unable to initialize device.\n"); return -1; } if (synaptics_set_advanced_gesture_mode(psmouse)) { - printk(KERN_ERR "Advanced gesture mode reconnect failed.\n"); + psmouse_err(psmouse, + "Advanced gesture mode reconnect failed.\n"); return -1; } @@ -815,12 +1249,12 @@ static int synaptics_reconnect(struct psmouse *psmouse) old_priv.model_id != priv->model_id || old_priv.capabilities != priv->capabilities || old_priv.ext_cap != priv->ext_cap) { - printk(KERN_ERR "Synaptics hardware appears to be different: " - "id(%ld-%ld), model(%ld-%ld), caps(%lx-%lx), ext(%lx-%lx).\n", - old_priv.identity, priv->identity, - old_priv.model_id, priv->model_id, - old_priv.capabilities, priv->capabilities, - old_priv.ext_cap, priv->ext_cap); + psmouse_err(psmouse, + "hardware appears to be different: id(%ld-%ld), model(%ld-%ld), caps(%lx-%lx), ext(%lx-%lx).\n", + old_priv.identity, priv->identity, + old_priv.model_id, priv->model_id, + old_priv.capabilities, priv->capabilities, + old_priv.ext_cap, priv->ext_cap); return -1; } @@ -901,7 +1335,8 @@ int synaptics_init(struct psmouse *psmouse) * just fine. */ if (broken_olpc_ec) { - printk(KERN_INFO "synaptics: OLPC XO detected, not enabling Synaptics protocol.\n"); + psmouse_info(psmouse, + "OLPC XO detected, not enabling Synaptics protocol.\n"); return -ENODEV; } @@ -912,26 +1347,28 @@ int synaptics_init(struct psmouse *psmouse) psmouse_reset(psmouse); if (synaptics_query_hardware(psmouse)) { - printk(KERN_ERR "Unable to query Synaptics hardware.\n"); + psmouse_err(psmouse, "Unable to query device.\n"); goto init_fail; } if (synaptics_set_absolute_mode(psmouse)) { - printk(KERN_ERR "Unable to initialize Synaptics hardware.\n"); + psmouse_err(psmouse, "Unable to initialize device.\n"); goto init_fail; } if (synaptics_set_advanced_gesture_mode(psmouse)) { - printk(KERN_ERR "Advanced gesture mode init failed.\n"); + psmouse_err(psmouse, "Advanced gesture mode init failed.\n"); goto init_fail; } priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS; - printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n", - SYN_ID_MODEL(priv->identity), - SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity), - priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c); + psmouse_info(psmouse, + "Touchpad model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n", + SYN_ID_MODEL(priv->identity), + SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity), + priv->model_id, + priv->capabilities, priv->ext_cap, priv->ext_cap_0c); set_input_params(psmouse->dev, priv); @@ -963,8 +1400,9 @@ int synaptics_init(struct psmouse *psmouse) * the same rate as a standard PS/2 mouse). */ if (psmouse->rate >= 80 && impaired_toshiba_kbc) { - printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n", - dmi_get_system_info(DMI_PRODUCT_NAME)); + psmouse_info(psmouse, + "Toshiba %s detected, limiting rate to 40pps.\n", + dmi_get_system_info(DMI_PRODUCT_NAME)); psmouse->rate = 40; } diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index ca040aa80fa7..622aea8dd7e0 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -74,6 +74,8 @@ * 2 0x04 reduced filtering firmware does less filtering on * position data, driver should watch * for noise. + * 2 0x08 image sensor image sensor tracks 5 fingers, but only + * reports 2. * 2 0x20 report min query 0x0f gives min coord reported */ #define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */ @@ -82,6 +84,7 @@ #define SYN_CAP_MIN_DIMENSIONS(ex0c) ((ex0c) & 0x002000) #define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000) #define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400) +#define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & 0x000800) /* synaptics modes query bits */ #define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7)) @@ -112,9 +115,18 @@ #define SYN_REDUCED_FILTER_FUZZ 8 /* - * A structure to describe the state of the touchpad hardware (buttons and pad) + * A structure to describe which internal touchpad finger slots are being + * reported in raw packets. */ +struct synaptics_mt_state { + int count; /* num fingers being tracked */ + int sgm; /* which slot is reported by sgm pkt */ + int agm; /* which slot is reported by agm pkt*/ +}; +/* + * A structure to describe the state of the touchpad hardware (buttons and pad) + */ struct synaptics_hw_state { int x; int y; @@ -127,6 +139,9 @@ struct synaptics_hw_state { unsigned int down:1; unsigned char ext_buttons; signed char scroll; + + /* As reported in last AGM-CONTACT packets */ + struct synaptics_mt_state mt_state; }; struct synaptics_data { @@ -146,7 +161,15 @@ struct synaptics_data { struct serio *pt_port; /* Pass-through serio port */ - struct synaptics_hw_state mt; /* current gesture packet */ + struct synaptics_mt_state mt_state; /* Current mt finger state */ + bool mt_state_lost; /* mt_state may be incorrect */ + + /* + * Last received Advanced Gesture Mode (AGM) packet. An AGM packet + * contains position data for a second contact, at half resolution. + */ + struct synaptics_hw_state agm; + bool agm_pending; /* new AGM packet received */ }; void synaptics_module_init(void); diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index cba3c84d2f21..4b755cb5b38c 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -570,7 +570,7 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client, "Requesting IRQ: %d\n", touch->client->irq); ret = request_irq(touch->client->irq, synaptics_i2c_irq, - IRQF_DISABLED|IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_EDGE_FALLING, DRIVER_NAME, touch); if (ret) { dev_warn(&touch->client->dev, @@ -619,7 +619,7 @@ static int __devexit synaptics_i2c_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int synaptics_i2c_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c index b7ba4597f7f0..4d4cd142bbbb 100644 --- a/drivers/input/serio/serio_raw.c +++ b/drivers/input/serio/serio_raw.c @@ -9,6 +9,7 @@ * the Free Software Foundation. */ +#include <linux/kref.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/poll.h> @@ -33,15 +34,16 @@ struct serio_raw { unsigned int tail, head; char name[16]; - unsigned int refcnt; + struct kref kref; struct serio *serio; struct miscdevice dev; wait_queue_head_t wait; - struct list_head list; + struct list_head client_list; struct list_head node; + bool dead; }; -struct serio_raw_list { +struct serio_raw_client { struct fasync_struct *fasync; struct serio_raw *serio_raw; struct list_head node; @@ -49,7 +51,6 @@ struct serio_raw_list { static DEFINE_MUTEX(serio_raw_mutex); static LIST_HEAD(serio_raw_list); -static unsigned int serio_raw_no; /********************************************************************* * Interface with userspace (file operations) * @@ -57,9 +58,9 @@ static unsigned int serio_raw_no; static int serio_raw_fasync(int fd, struct file *file, int on) { - struct serio_raw_list *list = file->private_data; + struct serio_raw_client *client = file->private_data; - return fasync_helper(fd, file, on, &list->fasync); + return fasync_helper(fd, file, on, &client->fasync); } static struct serio_raw *serio_raw_locate(int minor) @@ -77,8 +78,8 @@ static struct serio_raw *serio_raw_locate(int minor) static int serio_raw_open(struct inode *inode, struct file *file) { struct serio_raw *serio_raw; - struct serio_raw_list *list; - int retval = 0; + struct serio_raw_client *client; + int retval; retval = mutex_lock_interruptible(&serio_raw_mutex); if (retval) @@ -90,60 +91,61 @@ static int serio_raw_open(struct inode *inode, struct file *file) goto out; } - if (!serio_raw->serio) { + if (serio_raw->dead) { retval = -ENODEV; goto out; } - list = kzalloc(sizeof(struct serio_raw_list), GFP_KERNEL); - if (!list) { + client = kzalloc(sizeof(struct serio_raw_client), GFP_KERNEL); + if (!client) { retval = -ENOMEM; goto out; } - list->serio_raw = serio_raw; - file->private_data = list; + client->serio_raw = serio_raw; + file->private_data = client; + + kref_get(&serio_raw->kref); - serio_raw->refcnt++; - list_add_tail(&list->node, &serio_raw->list); + serio_pause_rx(serio_raw->serio); + list_add_tail(&client->node, &serio_raw->client_list); + serio_continue_rx(serio_raw->serio); out: mutex_unlock(&serio_raw_mutex); return retval; } -static int serio_raw_cleanup(struct serio_raw *serio_raw) +static void serio_raw_free(struct kref *kref) { - if (--serio_raw->refcnt == 0) { - misc_deregister(&serio_raw->dev); - list_del_init(&serio_raw->node); - kfree(serio_raw); + struct serio_raw *serio_raw = + container_of(kref, struct serio_raw, kref); - return 1; - } - - return 0; + put_device(&serio_raw->serio->dev); + kfree(serio_raw); } static int serio_raw_release(struct inode *inode, struct file *file) { - struct serio_raw_list *list = file->private_data; - struct serio_raw *serio_raw = list->serio_raw; + struct serio_raw_client *client = file->private_data; + struct serio_raw *serio_raw = client->serio_raw; - mutex_lock(&serio_raw_mutex); + serio_pause_rx(serio_raw->serio); + list_del(&client->node); + serio_continue_rx(serio_raw->serio); - serio_raw_cleanup(serio_raw); + kfree(client); + + kref_put(&serio_raw->kref, serio_raw_free); - mutex_unlock(&serio_raw_mutex); return 0; } -static int serio_raw_fetch_byte(struct serio_raw *serio_raw, char *c) +static bool serio_raw_fetch_byte(struct serio_raw *serio_raw, char *c) { - unsigned long flags; - int empty; + bool empty; - spin_lock_irqsave(&serio_raw->serio->lock, flags); + serio_pause_rx(serio_raw->serio); empty = serio_raw->head == serio_raw->tail; if (!empty) { @@ -151,30 +153,31 @@ static int serio_raw_fetch_byte(struct serio_raw *serio_raw, char *c) serio_raw->tail = (serio_raw->tail + 1) % SERIO_RAW_QUEUE_LEN; } - spin_unlock_irqrestore(&serio_raw->serio->lock, flags); + serio_continue_rx(serio_raw->serio); return !empty; } -static ssize_t serio_raw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) +static ssize_t serio_raw_read(struct file *file, char __user *buffer, + size_t count, loff_t *ppos) { - struct serio_raw_list *list = file->private_data; - struct serio_raw *serio_raw = list->serio_raw; + struct serio_raw_client *client = file->private_data; + struct serio_raw *serio_raw = client->serio_raw; char uninitialized_var(c); ssize_t retval = 0; - if (!serio_raw->serio) + if (serio_raw->dead) return -ENODEV; if (serio_raw->head == serio_raw->tail && (file->f_flags & O_NONBLOCK)) return -EAGAIN; - retval = wait_event_interruptible(list->serio_raw->wait, - serio_raw->head != serio_raw->tail || !serio_raw->serio); + retval = wait_event_interruptible(serio_raw->wait, + serio_raw->head != serio_raw->tail || serio_raw->dead); if (retval) return retval; - if (!serio_raw->serio) + if (serio_raw->dead) return -ENODEV; while (retval < count && serio_raw_fetch_byte(serio_raw, &c)) { @@ -186,9 +189,11 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer, size_t cou return retval; } -static ssize_t serio_raw_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) +static ssize_t serio_raw_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) { - struct serio_raw_list *list = file->private_data; + struct serio_raw_client *client = file->private_data; + struct serio_raw *serio_raw = client->serio_raw; ssize_t written = 0; int retval; unsigned char c; @@ -197,7 +202,7 @@ static ssize_t serio_raw_write(struct file *file, const char __user *buffer, siz if (retval) return retval; - if (!list->serio_raw->serio) { + if (serio_raw->dead) { retval = -ENODEV; goto out; } @@ -210,7 +215,7 @@ static ssize_t serio_raw_write(struct file *file, const char __user *buffer, siz retval = -EFAULT; goto out; } - if (serio_write(list->serio_raw->serio, c)) { + if (serio_write(serio_raw->serio, c)) { retval = -EIO; goto out; } @@ -224,46 +229,49 @@ out: static unsigned int serio_raw_poll(struct file *file, poll_table *wait) { - struct serio_raw_list *list = file->private_data; + struct serio_raw_client *client = file->private_data; + struct serio_raw *serio_raw = client->serio_raw; + unsigned int mask; - poll_wait(file, &list->serio_raw->wait, wait); + poll_wait(file, &serio_raw->wait, wait); - if (list->serio_raw->head != list->serio_raw->tail) + mask = serio_raw->dead ? POLLHUP | POLLERR : POLLOUT | POLLWRNORM; + if (serio_raw->head != serio_raw->tail) return POLLIN | POLLRDNORM; return 0; } static const struct file_operations serio_raw_fops = { - .owner = THIS_MODULE, - .open = serio_raw_open, - .release = serio_raw_release, - .read = serio_raw_read, - .write = serio_raw_write, - .poll = serio_raw_poll, - .fasync = serio_raw_fasync, - .llseek = noop_llseek, + .owner = THIS_MODULE, + .open = serio_raw_open, + .release = serio_raw_release, + .read = serio_raw_read, + .write = serio_raw_write, + .poll = serio_raw_poll, + .fasync = serio_raw_fasync, + .llseek = noop_llseek, }; /********************************************************************* - * Interface with serio port * + * Interface with serio port * *********************************************************************/ static irqreturn_t serio_raw_interrupt(struct serio *serio, unsigned char data, unsigned int dfl) { struct serio_raw *serio_raw = serio_get_drvdata(serio); - struct serio_raw_list *list; + struct serio_raw_client *client; unsigned int head = serio_raw->head; - /* we are holding serio->lock here so we are prootected */ + /* we are holding serio->lock here so we are protected */ serio_raw->queue[head] = data; head = (head + 1) % SERIO_RAW_QUEUE_LEN; if (likely(head != serio_raw->tail)) { serio_raw->head = head; - list_for_each_entry(list, &serio_raw->list, node) - kill_fasync(&list->fasync, SIGIO, POLL_IN); + list_for_each_entry(client, &serio_raw->client_list, node) + kill_fasync(&client->fasync, SIGIO, POLL_IN); wake_up_interruptible(&serio_raw->wait); } @@ -272,29 +280,37 @@ static irqreturn_t serio_raw_interrupt(struct serio *serio, unsigned char data, static int serio_raw_connect(struct serio *serio, struct serio_driver *drv) { + static atomic_t serio_raw_no = ATOMIC_INIT(0); struct serio_raw *serio_raw; int err; - if (!(serio_raw = kzalloc(sizeof(struct serio_raw), GFP_KERNEL))) { - printk(KERN_ERR "serio_raw.c: can't allocate memory for a device\n"); + serio_raw = kzalloc(sizeof(struct serio_raw), GFP_KERNEL); + if (!serio_raw) { + dev_dbg(&serio->dev, "can't allocate memory for a device\n"); return -ENOMEM; } - mutex_lock(&serio_raw_mutex); + snprintf(serio_raw->name, sizeof(serio_raw->name), + "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no) - 1); + kref_init(&serio_raw->kref); + INIT_LIST_HEAD(&serio_raw->client_list); + init_waitqueue_head(&serio_raw->wait); - snprintf(serio_raw->name, sizeof(serio_raw->name), "serio_raw%d", serio_raw_no++); - serio_raw->refcnt = 1; serio_raw->serio = serio; - INIT_LIST_HEAD(&serio_raw->list); - init_waitqueue_head(&serio_raw->wait); + get_device(&serio->dev); serio_set_drvdata(serio, serio_raw); err = serio_open(serio, drv); if (err) - goto out_free; + goto err_free; + + err = mutex_lock_killable(&serio_raw_mutex); + if (err) + goto err_close; list_add_tail(&serio_raw->node, &serio_raw_list); + mutex_unlock(&serio_raw_mutex); serio_raw->dev.minor = PSMOUSE_MINOR; serio_raw->dev.name = serio_raw->name; @@ -308,23 +324,23 @@ static int serio_raw_connect(struct serio *serio, struct serio_driver *drv) } if (err) { - printk(KERN_INFO "serio_raw: failed to register raw access device for %s\n", + dev_err(&serio->dev, + "failed to register raw access device for %s\n", serio->phys); - goto out_close; + goto err_unlink; } - printk(KERN_INFO "serio_raw: raw access enabled on %s (%s, minor %d)\n", - serio->phys, serio_raw->name, serio_raw->dev.minor); - goto out; + dev_info(&serio->dev, "raw access enabled on %s (%s, minor %d)\n", + serio->phys, serio_raw->name, serio_raw->dev.minor); + return 0; -out_close: - serio_close(serio); +err_unlink: list_del_init(&serio_raw->node); -out_free: +err_close: + serio_close(serio); +err_free: serio_set_drvdata(serio, NULL); - kfree(serio_raw); -out: - mutex_unlock(&serio_raw_mutex); + kref_put(&serio_raw->kref, serio_raw_free); return err; } @@ -334,7 +350,8 @@ static int serio_raw_reconnect(struct serio *serio) struct serio_driver *drv = serio->drv; if (!drv || !serio_raw) { - printk(KERN_DEBUG "serio_raw: reconnect request, but serio is disconnected, ignoring...\n"); + dev_dbg(&serio->dev, + "reconnect request, but serio is disconnected, ignoring...\n"); return -1; } @@ -345,22 +362,40 @@ static int serio_raw_reconnect(struct serio *serio) return 0; } +/* + * Wake up users waiting for IO so they can disconnect from + * dead device. + */ +static void serio_raw_hangup(struct serio_raw *serio_raw) +{ + struct serio_raw_client *client; + + serio_pause_rx(serio_raw->serio); + list_for_each_entry(client, &serio_raw->client_list, node) + kill_fasync(&client->fasync, SIGIO, POLL_HUP); + serio_continue_rx(serio_raw->serio); + + wake_up_interruptible(&serio_raw->wait); +} + + static void serio_raw_disconnect(struct serio *serio) { - struct serio_raw *serio_raw; + struct serio_raw *serio_raw = serio_get_drvdata(serio); + + misc_deregister(&serio_raw->dev); mutex_lock(&serio_raw_mutex); + serio_raw->dead = true; + list_del_init(&serio_raw->node); + mutex_unlock(&serio_raw_mutex); - serio_raw = serio_get_drvdata(serio); + serio_raw_hangup(serio_raw); serio_close(serio); - serio_set_drvdata(serio, NULL); - - serio_raw->serio = NULL; - if (!serio_raw_cleanup(serio_raw)) - wake_up_interruptible(&serio_raw->wait); + kref_put(&serio_raw->kref, serio_raw_free); - mutex_unlock(&serio_raw_mutex); + serio_set_drvdata(serio, NULL); } static struct serio_device_id serio_raw_serio_ids[] = { @@ -391,7 +426,7 @@ static struct serio_driver serio_raw_drv = { .connect = serio_raw_connect, .reconnect = serio_raw_reconnect, .disconnect = serio_raw_disconnect, - .manual_bind = 1, + .manual_bind = true, }; static int __init serio_raw_init(void) diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index 23317bd09c82..0783864a7dc2 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -11,7 +11,7 @@ * Copyright (c) 2000 Daniel Egger <egger@suse.de> * Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com> * Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be> - * Copyright (c) 2002-2009 Ping Cheng <pingc@wacom.com> + * Copyright (c) 2002-2011 Ping Cheng <pingc@wacom.com> * * ChangeLog: * v0.1 (vp) - Initial release @@ -93,7 +93,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.52" +#define DRIVER_VERSION "v1.53" #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>" #define DRIVER_DESC "USB Wacom tablet driver" #define DRIVER_LICENSE "GPL" @@ -114,6 +114,12 @@ struct wacom { struct mutex lock; bool open; char phys[32]; + struct wacom_led { + u8 select[2]; /* status led selector (0..3) */ + u8 llv; /* status led brightness no button (1..127) */ + u8 hlv; /* status led brightness button pressed (1..127) */ + u8 img_lum; /* OLED matrix display brightness */ + } led; }; extern const struct usb_device_id wacom_ids[]; diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 958b4eb6369d..1c1b7b43cf92 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -48,27 +48,49 @@ struct hid_descriptor { /* defines to get/set USB message */ #define USB_REQ_GET_REPORT 0x01 #define USB_REQ_SET_REPORT 0x09 + #define WAC_HID_FEATURE_REPORT 0x03 #define WAC_MSG_RETRIES 5 -static int usb_get_report(struct usb_interface *intf, unsigned char type, - unsigned char id, void *buf, int size) +#define WAC_CMD_LED_CONTROL 0x20 +#define WAC_CMD_ICON_START 0x21 +#define WAC_CMD_ICON_XFER 0x23 +#define WAC_CMD_RETRIES 10 + +static int wacom_get_report(struct usb_interface *intf, u8 type, u8 id, + void *buf, size_t size, unsigned int retries) { - return usb_control_msg(interface_to_usbdev(intf), - usb_rcvctrlpipe(interface_to_usbdev(intf), 0), - USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, - (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, - buf, size, 100); + struct usb_device *dev = interface_to_usbdev(intf); + int retval; + + do { + retval = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + USB_REQ_GET_REPORT, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + (type << 8) + id, + intf->altsetting[0].desc.bInterfaceNumber, + buf, size, 100); + } while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries); + + return retval; } -static int usb_set_report(struct usb_interface *intf, unsigned char type, - unsigned char id, void *buf, int size) +static int wacom_set_report(struct usb_interface *intf, u8 type, u8 id, + void *buf, size_t size, unsigned int retries) { - return usb_control_msg(interface_to_usbdev(intf), - usb_sndctrlpipe(interface_to_usbdev(intf), 0), - USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, - (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, - buf, size, 1000); + struct usb_device *dev = interface_to_usbdev(intf); + int retval; + + do { + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + USB_REQ_SET_REPORT, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + (type << 8) + id, + intf->altsetting[0].desc.bInterfaceNumber, + buf, size, 1000); + } while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries); + + return retval; } static void wacom_sys_irq(struct urb *urb) @@ -319,23 +341,23 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat rep_data[2] = 0; rep_data[3] = 0; report_id = 3; - error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, - report_id, rep_data, 4); + error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT, + report_id, rep_data, 4, 1); if (error >= 0) - error = usb_get_report(intf, - WAC_HID_FEATURE_REPORT, report_id, - rep_data, 4); + error = wacom_get_report(intf, + WAC_HID_FEATURE_REPORT, + report_id, rep_data, 4, 1); } while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES); } else if (features->type != TABLETPC) { do { rep_data[0] = 2; rep_data[1] = 2; - error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, - report_id, rep_data, 2); + error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT, + report_id, rep_data, 2, 1); if (error >= 0) - error = usb_get_report(intf, - WAC_HID_FEATURE_REPORT, report_id, - rep_data, 2); + error = wacom_get_report(intf, + WAC_HID_FEATURE_REPORT, + report_id, rep_data, 2, 1); } while ((error < 0 || rep_data[1] != 2) && limit++ < WAC_MSG_RETRIES); } @@ -454,6 +476,275 @@ static void wacom_remove_shared_data(struct wacom_wac *wacom) } } +static int wacom_led_control(struct wacom *wacom) +{ + unsigned char *buf; + int retval, led = 0; + + buf = kzalloc(9, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (wacom->wacom_wac.features.type == WACOM_21UX2) + led = (wacom->led.select[1] << 4) | 0x40; + + led |= wacom->led.select[0] | 0x4; + + buf[0] = WAC_CMD_LED_CONTROL; + buf[1] = led; + buf[2] = wacom->led.llv; + buf[3] = wacom->led.hlv; + buf[4] = wacom->led.img_lum; + + retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_LED_CONTROL, + buf, 9, WAC_CMD_RETRIES); + kfree(buf); + + return retval; +} + +static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *img) +{ + unsigned char *buf; + int i, retval; + + buf = kzalloc(259, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* Send 'start' command */ + buf[0] = WAC_CMD_ICON_START; + buf[1] = 1; + retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_START, + buf, 2, WAC_CMD_RETRIES); + if (retval < 0) + goto out; + + buf[0] = WAC_CMD_ICON_XFER; + buf[1] = button_id & 0x07; + for (i = 0; i < 4; i++) { + buf[2] = i; + memcpy(buf + 3, img + i * 256, 256); + + retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_XFER, + buf, 259, WAC_CMD_RETRIES); + if (retval < 0) + break; + } + + /* Send 'stop' */ + buf[0] = WAC_CMD_ICON_START; + buf[1] = 0; + wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_START, + buf, 2, WAC_CMD_RETRIES); + +out: + kfree(buf); + return retval; +} + +static ssize_t wacom_led_select_store(struct device *dev, int set_id, + const char *buf, size_t count) +{ + struct wacom *wacom = dev_get_drvdata(dev); + unsigned int id; + int err; + + err = kstrtouint(buf, 10, &id); + if (err) + return err; + + mutex_lock(&wacom->lock); + + wacom->led.select[set_id] = id & 0x3; + err = wacom_led_control(wacom); + + mutex_unlock(&wacom->lock); + + return err < 0 ? err : count; +} + +#define DEVICE_LED_SELECT_ATTR(SET_ID) \ +static ssize_t wacom_led##SET_ID##_select_store(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + return wacom_led_select_store(dev, SET_ID, buf, count); \ +} \ +static ssize_t wacom_led##SET_ID##_select_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct wacom *wacom = dev_get_drvdata(dev); \ + return snprintf(buf, 2, "%d\n", wacom->led.select[SET_ID]); \ +} \ +static DEVICE_ATTR(status_led##SET_ID##_select, S_IWUSR | S_IRUSR, \ + wacom_led##SET_ID##_select_show, \ + wacom_led##SET_ID##_select_store) + +DEVICE_LED_SELECT_ATTR(0); +DEVICE_LED_SELECT_ATTR(1); + +static ssize_t wacom_luminance_store(struct wacom *wacom, u8 *dest, + const char *buf, size_t count) +{ + unsigned int value; + int err; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + mutex_lock(&wacom->lock); + + *dest = value & 0x7f; + err = wacom_led_control(wacom); + + mutex_unlock(&wacom->lock); + + return err < 0 ? err : count; +} + +#define DEVICE_LUMINANCE_ATTR(name, field) \ +static ssize_t wacom_##name##_luminance_store(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + struct wacom *wacom = dev_get_drvdata(dev); \ + \ + return wacom_luminance_store(wacom, &wacom->led.field, \ + buf, count); \ +} \ +static DEVICE_ATTR(name##_luminance, S_IWUSR, \ + NULL, wacom_##name##_luminance_store) + +DEVICE_LUMINANCE_ATTR(status0, llv); +DEVICE_LUMINANCE_ATTR(status1, hlv); +DEVICE_LUMINANCE_ATTR(buttons, img_lum); + +static ssize_t wacom_button_image_store(struct device *dev, int button_id, + const char *buf, size_t count) +{ + struct wacom *wacom = dev_get_drvdata(dev); + int err; + + if (count != 1024) + return -EINVAL; + + mutex_lock(&wacom->lock); + + err = wacom_led_putimage(wacom, button_id, buf); + + mutex_unlock(&wacom->lock); + + return err < 0 ? err : count; +} + +#define DEVICE_BTNIMG_ATTR(BUTTON_ID) \ +static ssize_t wacom_btnimg##BUTTON_ID##_store(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + return wacom_button_image_store(dev, BUTTON_ID, buf, count); \ +} \ +static DEVICE_ATTR(button##BUTTON_ID##_rawimg, S_IWUSR, \ + NULL, wacom_btnimg##BUTTON_ID##_store) + +DEVICE_BTNIMG_ATTR(0); +DEVICE_BTNIMG_ATTR(1); +DEVICE_BTNIMG_ATTR(2); +DEVICE_BTNIMG_ATTR(3); +DEVICE_BTNIMG_ATTR(4); +DEVICE_BTNIMG_ATTR(5); +DEVICE_BTNIMG_ATTR(6); +DEVICE_BTNIMG_ATTR(7); + +static struct attribute *cintiq_led_attrs[] = { + &dev_attr_status_led0_select.attr, + &dev_attr_status_led1_select.attr, + NULL +}; + +static struct attribute_group cintiq_led_attr_group = { + .name = "wacom_led", + .attrs = cintiq_led_attrs, +}; + +static struct attribute *intuos4_led_attrs[] = { + &dev_attr_status0_luminance.attr, + &dev_attr_status1_luminance.attr, + &dev_attr_status_led0_select.attr, + &dev_attr_buttons_luminance.attr, + &dev_attr_button0_rawimg.attr, + &dev_attr_button1_rawimg.attr, + &dev_attr_button2_rawimg.attr, + &dev_attr_button3_rawimg.attr, + &dev_attr_button4_rawimg.attr, + &dev_attr_button5_rawimg.attr, + &dev_attr_button6_rawimg.attr, + &dev_attr_button7_rawimg.attr, + NULL +}; + +static struct attribute_group intuos4_led_attr_group = { + .name = "wacom_led", + .attrs = intuos4_led_attrs, +}; + +static int wacom_initialize_leds(struct wacom *wacom) +{ + int error; + + /* Initialize default values */ + switch (wacom->wacom_wac.features.type) { + case INTUOS4: + case INTUOS4L: + wacom->led.select[0] = 0; + wacom->led.select[1] = 0; + wacom->led.llv = 10; + wacom->led.hlv = 20; + wacom->led.img_lum = 10; + error = sysfs_create_group(&wacom->intf->dev.kobj, + &intuos4_led_attr_group); + break; + + case WACOM_21UX2: + wacom->led.select[0] = 0; + wacom->led.select[1] = 0; + wacom->led.llv = 0; + wacom->led.hlv = 0; + wacom->led.img_lum = 0; + + error = sysfs_create_group(&wacom->intf->dev.kobj, + &cintiq_led_attr_group); + break; + + default: + return 0; + } + + if (error) { + dev_err(&wacom->intf->dev, + "cannot create sysfs group err: %d\n", error); + return error; + } + wacom_led_control(wacom); + + return 0; +} + +static void wacom_destroy_leds(struct wacom *wacom) +{ + switch (wacom->wacom_wac.features.type) { + case INTUOS4: + case INTUOS4L: + sysfs_remove_group(&wacom->intf->dev.kobj, + &intuos4_led_attr_group); + break; + + case WACOM_21UX2: + sysfs_remove_group(&wacom->intf->dev.kobj, + &cintiq_led_attr_group); + break; + } +} + static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); @@ -542,16 +833,21 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i wacom->irq->transfer_dma = wacom->data_dma; wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - error = input_register_device(input_dev); + error = wacom_initialize_leds(wacom); if (error) goto fail4; + error = input_register_device(input_dev); + if (error) + goto fail5; + /* Note that if query fails it is not a hard failure */ wacom_query_tablet_data(intf, features); usb_set_intfdata(intf, wacom); return 0; + fail5: wacom_destroy_leds(wacom); fail4: wacom_remove_shared_data(wacom_wac); fail3: usb_free_urb(wacom->irq); fail2: usb_free_coherent(dev, WACOM_PKGLEN_MAX, wacom_wac->data, wacom->data_dma); @@ -568,6 +864,7 @@ static void wacom_disconnect(struct usb_interface *intf) usb_kill_urb(wacom->irq); input_unregister_device(wacom->wacom_wac.input); + wacom_destroy_leds(wacom); usb_free_urb(wacom->irq); usb_free_coherent(interface_to_usbdev(intf), WACOM_PKGLEN_MAX, wacom->wacom_wac.data, wacom->data_dma); @@ -590,17 +887,16 @@ static int wacom_resume(struct usb_interface *intf) { struct wacom *wacom = usb_get_intfdata(intf); struct wacom_features *features = &wacom->wacom_wac.features; - int rv; + int rv = 0; mutex_lock(&wacom->lock); /* switch to wacom mode first */ wacom_query_tablet_data(intf, features); + wacom_led_control(wacom); - if (wacom->open) - rv = usb_submit_urb(wacom->irq, GFP_NOIO); - else - rv = 0; + if (wacom->open && usb_submit_urb(wacom->irq, GFP_NOIO) < 0) + rv = -EIO; mutex_unlock(&wacom->lock); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 9dea71849f40..da0d8761e778 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -874,7 +874,15 @@ static int wacom_bpt_pen(struct wacom_wac *wacom) x = le16_to_cpup((__le16 *)&data[2]); y = le16_to_cpup((__le16 *)&data[4]); p = le16_to_cpup((__le16 *)&data[6]); - d = data[8]; + /* + * Convert distance from out prox to distance from tablet. + * distance will be greater than distance_max once + * touching and applying pressure; do not report negative + * distance. + */ + if (data[8] <= wacom->features.distance_max) + d = wacom->features.distance_max - data[8]; + pen = data[1] & 0x01; btn1 = data[1] & 0x02; btn2 = data[1] & 0x04; @@ -1030,8 +1038,6 @@ void wacom_setup_device_quirks(struct wacom_features *features) features->y_max <<= 5; features->x_fuzz <<= 5; features->y_fuzz <<= 5; - features->pressure_max = 256; - features->pressure_fuzz = 16; features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES; } } @@ -1241,14 +1247,14 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, features->y_max, features->y_fuzz, 0); - input_set_abs_params(input_dev, ABS_MT_PRESSURE, - 0, features->pressure_max, - features->pressure_fuzz, 0); } else if (features->device_type == BTN_TOOL_PEN) { __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, + features->distance_max, + 0, 0); } break; } @@ -1469,37 +1475,37 @@ static const struct wacom_features wacom_features_0x47 = 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD0 = { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD1 = { "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD2 = { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD3 = - { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, - 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD4 = { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD5 = - { "Wacom Bamboo Pen 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, - 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo Pen 6x8", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD6 = { "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD7 = { "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD8 = - { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, - 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xDA = { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static struct wacom_features wacom_features_0xDB = - { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, - 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x6004 = { "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index cabd9e54863f..3488ffe1fa0a 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -651,6 +651,18 @@ config TOUCHSCREEN_TOUCHIT213 To compile this driver as a module, choose M here: the module will be called touchit213. +config TOUCHSCREEN_TSC_SERIO + tristate "TSC-10/25/40 serial touchscreen support" + select SERIO + help + Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected + to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called tsc40. + config TOUCHSCREEN_TSC2005 tristate "TSC2005 based touchscreens" depends on SPI_MASTER && GENERIC_HARDIRQS diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 282d6f76ae26..f957676035a4 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o +obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c index 4e4e58cec6c8..c789b974c795 100644 --- a/drivers/input/touchscreen/ad7879-i2c.c +++ b/drivers/input/touchscreen/ad7879-i2c.c @@ -16,7 +16,7 @@ #define AD7879_DEVID 0x79 /* AD7879-1/AD7889-1 */ -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ad7879_i2c_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -36,9 +36,9 @@ static int ad7879_i2c_resume(struct device *dev) return 0; } +#endif static SIMPLE_DEV_PM_OPS(ad7879_i2c_pm, ad7879_i2c_suspend, ad7879_i2c_resume); -#endif /* All registers are word-sized. * AD7879 uses a high-byte first convention. @@ -119,9 +119,7 @@ static struct i2c_driver ad7879_i2c_driver = { .driver = { .name = "ad7879", .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &ad7879_i2c_pm, -#endif }, .probe = ad7879_i2c_probe, .remove = __devexit_p(ad7879_i2c_remove), diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index f5d66859f232..a596c2775d1a 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -910,12 +910,17 @@ static ssize_t mxt_object_show(struct device *dev, for (i = 0; i < data->info.object_num; i++) { object = data->object_table + i; - count += sprintf(buf + count, - "Object Table Element %d(Type %d)\n", + count += snprintf(buf + count, PAGE_SIZE - count, + "Object[%d] (Type %d)\n", i + 1, object->type); + if (count >= PAGE_SIZE) + return PAGE_SIZE - 1; if (!mxt_object_readable(object->type)) { - count += sprintf(buf + count, "\n"); + count += snprintf(buf + count, PAGE_SIZE - count, + "\n"); + if (count >= PAGE_SIZE) + return PAGE_SIZE - 1; continue; } @@ -925,11 +930,15 @@ static ssize_t mxt_object_show(struct device *dev, if (error) return error; - count += sprintf(buf + count, - " Byte %d: 0x%x (%d)\n", j, val, val); + count += snprintf(buf + count, PAGE_SIZE - count, + "\t[%2d]: %02x (%d)\n", j, val, val); + if (count >= PAGE_SIZE) + return PAGE_SIZE - 1; } - count += sprintf(buf + count, "\n"); + count += snprintf(buf + count, PAGE_SIZE - count, "\n"); + if (count >= PAGE_SIZE) + return PAGE_SIZE - 1; } return count; diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c index 432c69be6ac6..122a87883659 100644 --- a/drivers/input/touchscreen/atmel_tsadcc.c +++ b/drivers/input/touchscreen/atmel_tsadcc.c @@ -229,7 +229,7 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev) goto err_release_mem; } - err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, IRQF_DISABLED, + err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, 0, pdev->dev.driver->name, ts_dev); if (err) { dev_err(&pdev->dev, "failed to allocate irq.\n"); diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c index 211811ae5525..6107e563e681 100644 --- a/drivers/input/touchscreen/h3600_ts_input.c +++ b/drivers/input/touchscreen/h3600_ts_input.c @@ -396,14 +396,14 @@ static int h3600ts_connect(struct serio *serio, struct serio_driver *drv) set_GPIO_IRQ_edge(GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE); if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler, - IRQF_SHARED | IRQF_DISABLED, "h3600_action", ts->dev)) { + IRQF_SHARED, "h3600_action", ts->dev)) { printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n"); err = -EBUSY; goto fail1; } if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler, - IRQF_SHARED | IRQF_DISABLED, "h3600_suspend", ts->dev)) { + IRQF_SHARED, "h3600_suspend", ts->dev)) { printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n"); err = -EBUSY; goto fail2; diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c index dd4e8f020b99..639a6044183d 100644 --- a/drivers/input/touchscreen/hp680_ts_input.c +++ b/drivers/input/touchscreen/hp680_ts_input.c @@ -93,7 +93,7 @@ static int __init hp680_ts_init(void) hp680_ts_dev->phys = "hp680_ts/input0"; if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt, - IRQF_DISABLED, MODNAME, 0) < 0) { + 0, MODNAME, 0) < 0) { printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n", HP680_TS_IRQ); err = -EBUSY; diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index 4b0a061811ff..50076c2d59e2 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -127,7 +127,7 @@ static int __devinit jornada720_ts_probe(struct platform_device *pdev) error = request_irq(IRQ_GPIO9, jornada720_ts_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING, + IRQF_TRIGGER_RISING, "HP7XX Touchscreen driver", pdev); if (error) { printk(KERN_INFO "HP7XX TS : Unable to acquire irq!\n"); diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c index dcf803f5a1f7..0a484ed5295c 100644 --- a/drivers/input/touchscreen/lpc32xx_ts.c +++ b/drivers/input/touchscreen/lpc32xx_ts.c @@ -276,7 +276,7 @@ static int __devinit lpc32xx_ts_probe(struct platform_device *pdev) input_set_drvdata(input, tsc); error = request_irq(tsc->irq, lpc32xx_ts_interrupt, - IRQF_DISABLED, pdev->name, tsc); + 0, pdev->name, tsc); if (error) { dev_err(&pdev->dev, "failed requesting interrupt\n"); goto err_put_clock; diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c index c7f9cebebbb6..4c012fb2b01e 100644 --- a/drivers/input/touchscreen/penmount.c +++ b/drivers/input/touchscreen/penmount.c @@ -2,6 +2,7 @@ * Penmount serial touchscreen driver * * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com> + * Copyright (c) 2011 John Sung <penmount.touch@gmail.com> * * Based on ELO driver (drivers/input/touchscreen/elo.c) * Copyright (c) 2004 Vojtech Pavlik @@ -18,12 +19,14 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/input.h> +#include <linux/input/mt.h> #include <linux/serio.h> #include <linux/init.h> -#define DRIVER_DESC "Penmount serial touchscreen driver" +#define DRIVER_DESC "PenMount serial touchscreen driver" MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>"); +MODULE_AUTHOR("John Sung <penmount.touch@gmail.com>"); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); @@ -31,7 +34,19 @@ MODULE_LICENSE("GPL"); * Definitions & global arrays. */ -#define PM_MAX_LENGTH 5 +#define PM_MAX_LENGTH 6 +#define PM_MAX_MTSLOT 16 +#define PM_3000_MTSLOT 2 +#define PM_6250_MTSLOT 12 + +/* + * Multi-touch slot + */ + +struct mt_slot { + unsigned short x, y; + bool active; /* is the touch valid? */ +}; /* * Per-touchscreen data. @@ -43,25 +58,119 @@ struct pm { int idx; unsigned char data[PM_MAX_LENGTH]; char phys[32]; + unsigned char packetsize; + unsigned char maxcontacts; + struct mt_slot slots[PM_MAX_MTSLOT]; + void (*parse_packet)(struct pm *); }; -static irqreturn_t pm_interrupt(struct serio *serio, - unsigned char data, unsigned int flags) +/* + * pm_mtevent() sends mt events and also emulates pointer movement + */ + +static void pm_mtevent(struct pm *pm, struct input_dev *input) +{ + int i; + + for (i = 0; i < pm->maxcontacts; ++i) { + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, + pm->slots[i].active); + if (pm->slots[i].active) { + input_event(input, EV_ABS, ABS_MT_POSITION_X, pm->slots[i].x); + input_event(input, EV_ABS, ABS_MT_POSITION_Y, pm->slots[i].y); + } + } + + input_mt_report_pointer_emulation(input, true); + input_sync(input); +} + +/* + * pm_checkpacket() checks if data packet is valid + */ + +static bool pm_checkpacket(unsigned char *packet) +{ + int total = 0; + int i; + + for (i = 0; i < 5; i++) + total += packet[i]; + + return packet[5] == (unsigned char)~(total & 0xff); +} + +static void pm_parse_9000(struct pm *pm) { - struct pm *pm = serio_get_drvdata(serio); struct input_dev *dev = pm->dev; - pm->data[pm->idx] = data; + if ((pm->data[0] & 0x80) && pm->packetsize == ++pm->idx) { + input_report_abs(dev, ABS_X, pm->data[1] * 128 + pm->data[2]); + input_report_abs(dev, ABS_Y, pm->data[3] * 128 + pm->data[4]); + input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40)); + input_sync(dev); + pm->idx = 0; + } +} - if (pm->data[0] & 0x80) { - if (PM_MAX_LENGTH == ++pm->idx) { - input_report_abs(dev, ABS_X, pm->data[2] * 128 + pm->data[1]); - input_report_abs(dev, ABS_Y, pm->data[4] * 128 + pm->data[3]); - input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40)); +static void pm_parse_6000(struct pm *pm) +{ + struct input_dev *dev = pm->dev; + + if ((pm->data[0] & 0xbf) == 0x30 && pm->packetsize == ++pm->idx) { + if (pm_checkpacket(pm->data)) { + input_report_abs(dev, ABS_X, + pm->data[2] * 256 + pm->data[1]); + input_report_abs(dev, ABS_Y, + pm->data[4] * 256 + pm->data[3]); + input_report_key(dev, BTN_TOUCH, pm->data[0] & 0x40); input_sync(dev); - pm->idx = 0; } + pm->idx = 0; + } +} + +static void pm_parse_3000(struct pm *pm) +{ + struct input_dev *dev = pm->dev; + + if ((pm->data[0] & 0xce) == 0x40 && pm->packetsize == ++pm->idx) { + if (pm_checkpacket(pm->data)) { + int slotnum = pm->data[0] & 0x0f; + pm->slots[slotnum].active = pm->data[0] & 0x30; + pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1]; + pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3]; + pm_mtevent(pm, dev); + } + pm->idx = 0; + } +} + +static void pm_parse_6250(struct pm *pm) +{ + struct input_dev *dev = pm->dev; + + if ((pm->data[0] & 0xb0) == 0x30 && pm->packetsize == ++pm->idx) { + if (pm_checkpacket(pm->data)) { + int slotnum = pm->data[0] & 0x0f; + pm->slots[slotnum].active = pm->data[0] & 0x40; + pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1]; + pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3]; + pm_mtevent(pm, dev); + } + pm->idx = 0; } +} + +static irqreturn_t pm_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct pm *pm = serio_get_drvdata(serio); + + pm->data[pm->idx] = data; + + pm->parse_packet(pm); return IRQ_HANDLED; } @@ -74,17 +183,17 @@ static void pm_disconnect(struct serio *serio) { struct pm *pm = serio_get_drvdata(serio); - input_get_device(pm->dev); - input_unregister_device(pm->dev); serio_close(serio); - serio_set_drvdata(serio, NULL); - input_put_device(pm->dev); + + input_unregister_device(pm->dev); kfree(pm); + + serio_set_drvdata(serio, NULL); } /* * pm_connect() is the routine that is called when someone adds a - * new serio device that supports Gunze protocol and registers it as + * new serio device that supports PenMount protocol and registers it as * an input device. */ @@ -92,6 +201,7 @@ static int pm_connect(struct serio *serio, struct serio_driver *drv) { struct pm *pm; struct input_dev *input_dev; + int max_x, max_y; int err; pm = kzalloc(sizeof(struct pm), GFP_KERNEL); @@ -104,8 +214,9 @@ static int pm_connect(struct serio *serio, struct serio_driver *drv) pm->serio = serio; pm->dev = input_dev; snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys); + pm->maxcontacts = 1; - input_dev->name = "Penmount Serial TouchScreen"; + input_dev->name = "PenMount Serial TouchScreen"; input_dev->phys = pm->phys; input_dev->id.bustype = BUS_RS232; input_dev->id.vendor = SERIO_PENMOUNT; @@ -113,10 +224,52 @@ static int pm_connect(struct serio *serio, struct serio_driver *drv) input_dev->id.version = 0x0100; input_dev->dev.parent = &serio->dev; - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - input_set_abs_params(pm->dev, ABS_X, 0, 0x3ff, 0, 0); - input_set_abs_params(pm->dev, ABS_Y, 0, 0x3ff, 0, 0); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + switch (serio->id.id) { + default: + case 0: + pm->packetsize = 5; + pm->parse_packet = pm_parse_9000; + input_dev->id.product = 0x9000; + max_x = max_y = 0x3ff; + break; + + case 1: + pm->packetsize = 6; + pm->parse_packet = pm_parse_6000; + input_dev->id.product = 0x6000; + max_x = max_y = 0x3ff; + break; + + case 2: + pm->packetsize = 6; + pm->parse_packet = pm_parse_3000; + input_dev->id.product = 0x3000; + max_x = max_y = 0x7ff; + pm->maxcontacts = PM_3000_MTSLOT; + break; + + case 3: + pm->packetsize = 6; + pm->parse_packet = pm_parse_6250; + input_dev->id.product = 0x6250; + max_x = max_y = 0x3ff; + pm->maxcontacts = PM_6250_MTSLOT; + break; + } + + input_set_abs_params(pm->dev, ABS_X, 0, max_x, 0, 0); + input_set_abs_params(pm->dev, ABS_Y, 0, max_y, 0, 0); + + if (pm->maxcontacts > 1) { + input_mt_init_slots(pm->dev, pm->maxcontacts); + input_set_abs_params(pm->dev, + ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(pm->dev, + ABS_MT_POSITION_Y, 0, max_y, 0, 0); + } serio_set_drvdata(serio, pm); @@ -155,7 +308,7 @@ MODULE_DEVICE_TABLE(serio, pm_serio_ids); static struct serio_driver pm_drv = { .driver = { - .name = "penmountlpc", + .name = "serio-penmount", }, .description = DRIVER_DESC, .id_table = pm_serio_ids, diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 8feb7f3c8be1..64ce697a3456 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -328,7 +328,7 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev) ts.shift = info->oversampling_shift; ts.features = platform_get_device_id(pdev)->driver_data; - ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED, + ret = request_irq(ts.irq_tc, stylus_irq, 0, "s3c2410_ts_pen", ts.input); if (ret) { dev_err(dev, "cannot get TC interrupt\n"); diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index fadc11545b1e..1f674cb6c55b 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -66,7 +66,6 @@ struct ts_event { struct tsc2007 { struct input_dev *input; char phys[32]; - struct delayed_work work; struct i2c_client *client; @@ -76,9 +75,11 @@ struct tsc2007 { unsigned long poll_delay; unsigned long poll_period; - bool pendown; int irq; + wait_queue_head_t wait; + bool stopped; + int (*get_pendown_state)(void); void (*clear_penirq)(void); }; @@ -141,25 +142,8 @@ static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc) return rt; } -static void tsc2007_send_up_event(struct tsc2007 *tsc) +static bool tsc2007_is_pen_down(struct tsc2007 *ts) { - struct input_dev *input = tsc->input; - - dev_dbg(&tsc->client->dev, "UP\n"); - - input_report_key(input, BTN_TOUCH, 0); - input_report_abs(input, ABS_PRESSURE, 0); - input_sync(input); -} - -static void tsc2007_work(struct work_struct *work) -{ - struct tsc2007 *ts = - container_of(to_delayed_work(work), struct tsc2007, work); - bool debounced = false; - struct ts_event tc; - u32 rt; - /* * NOTE: We can't rely on the pressure to determine the pen down * state, even though this controller has a pressure sensor. @@ -170,79 +154,82 @@ static void tsc2007_work(struct work_struct *work) * The only safe way to check for the pen up condition is in the * work function by reading the pen signal state (it's a GPIO * and IRQ). Unfortunately such callback is not always available, - * in that case we have rely on the pressure anyway. + * in that case we assume that the pen is down and expect caller + * to fall back on the pressure reading. */ - if (ts->get_pendown_state) { - if (unlikely(!ts->get_pendown_state())) { - tsc2007_send_up_event(ts); - ts->pendown = false; - goto out; - } - dev_dbg(&ts->client->dev, "pen is still down\n"); - } + if (!ts->get_pendown_state) + return true; + + return ts->get_pendown_state(); +} + +static irqreturn_t tsc2007_soft_irq(int irq, void *handle) +{ + struct tsc2007 *ts = handle; + struct input_dev *input = ts->input; + struct ts_event tc; + u32 rt; - tsc2007_read_values(ts, &tc); + while (!ts->stopped && tsc2007_is_pen_down(ts)) { - rt = tsc2007_calculate_pressure(ts, &tc); - if (rt > ts->max_rt) { - /* - * Sample found inconsistent by debouncing or pressure is - * beyond the maximum. Don't report it to user space, - * repeat at least once more the measurement. - */ - dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); - debounced = true; - goto out; + /* pen is down, continue with the measurement */ + tsc2007_read_values(ts, &tc); - } + rt = tsc2007_calculate_pressure(ts, &tc); - if (rt) { - struct input_dev *input = ts->input; + if (rt == 0 && !ts->get_pendown_state) { + /* + * If pressure reported is 0 and we don't have + * callback to check pendown state, we have to + * assume that pen was lifted up. + */ + break; + } - if (!ts->pendown) { - dev_dbg(&ts->client->dev, "DOWN\n"); + if (rt <= ts->max_rt) { + dev_dbg(&ts->client->dev, + "DOWN point(%4d,%4d), pressure (%4u)\n", + tc.x, tc.y, rt); input_report_key(input, BTN_TOUCH, 1); - ts->pendown = true; + input_report_abs(input, ABS_X, tc.x); + input_report_abs(input, ABS_Y, tc.y); + input_report_abs(input, ABS_PRESSURE, rt); + + input_sync(input); + + } else { + /* + * Sample found inconsistent by debouncing or pressure is + * beyond the maximum. Don't report it to user space, + * repeat at least once more the measurement. + */ + dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); } - input_report_abs(input, ABS_X, tc.x); - input_report_abs(input, ABS_Y, tc.y); - input_report_abs(input, ABS_PRESSURE, rt); + wait_event_timeout(ts->wait, ts->stopped, + msecs_to_jiffies(ts->poll_period)); + } - input_sync(input); + dev_dbg(&ts->client->dev, "UP\n"); - dev_dbg(&ts->client->dev, "point(%4d,%4d), pressure (%4u)\n", - tc.x, tc.y, rt); + input_report_key(input, BTN_TOUCH, 0); + input_report_abs(input, ABS_PRESSURE, 0); + input_sync(input); - } else if (!ts->get_pendown_state && ts->pendown) { - /* - * We don't have callback to check pendown state, so we - * have to assume that since pressure reported is 0 the - * pen was lifted up. - */ - tsc2007_send_up_event(ts); - ts->pendown = false; - } + if (ts->clear_penirq) + ts->clear_penirq(); - out: - if (ts->pendown || debounced) - schedule_delayed_work(&ts->work, - msecs_to_jiffies(ts->poll_period)); - else - enable_irq(ts->irq); + return IRQ_HANDLED; } -static irqreturn_t tsc2007_irq(int irq, void *handle) +static irqreturn_t tsc2007_hard_irq(int irq, void *handle) { struct tsc2007 *ts = handle; - if (!ts->get_pendown_state || likely(ts->get_pendown_state())) { - disable_irq_nosync(ts->irq); - schedule_delayed_work(&ts->work, - msecs_to_jiffies(ts->poll_delay)); - } + if (!ts->get_pendown_state || likely(ts->get_pendown_state())) + return IRQ_WAKE_THREAD; if (ts->clear_penirq) ts->clear_penirq(); @@ -250,17 +237,40 @@ static irqreturn_t tsc2007_irq(int irq, void *handle) return IRQ_HANDLED; } -static void tsc2007_free_irq(struct tsc2007 *ts) +static void tsc2007_stop(struct tsc2007 *ts) { - free_irq(ts->irq, ts); - if (cancel_delayed_work_sync(&ts->work)) { - /* - * Work was pending, therefore we need to enable - * IRQ here to balance the disable_irq() done in the - * interrupt handler. - */ - enable_irq(ts->irq); + ts->stopped = true; + mb(); + wake_up(&ts->wait); + + disable_irq(ts->irq); +} + +static int tsc2007_open(struct input_dev *input_dev) +{ + struct tsc2007 *ts = input_get_drvdata(input_dev); + int err; + + ts->stopped = false; + mb(); + + enable_irq(ts->irq); + + /* Prepare for touch readings - power down ADC and enable PENIRQ */ + err = tsc2007_xfer(ts, PWRDOWN); + if (err < 0) { + tsc2007_stop(ts); + return err; } + + return 0; +} + +static void tsc2007_close(struct input_dev *input_dev) +{ + struct tsc2007 *ts = input_get_drvdata(input_dev); + + tsc2007_stop(ts); } static int __devinit tsc2007_probe(struct i2c_client *client, @@ -290,7 +300,7 @@ static int __devinit tsc2007_probe(struct i2c_client *client, ts->client = client; ts->irq = client->irq; ts->input = input_dev; - INIT_DELAYED_WORK(&ts->work, tsc2007_work); + init_waitqueue_head(&ts->wait); ts->model = pdata->model; ts->x_plate_ohms = pdata->x_plate_ohms; @@ -300,6 +310,12 @@ static int __devinit tsc2007_probe(struct i2c_client *client, ts->get_pendown_state = pdata->get_pendown_state; ts->clear_penirq = pdata->clear_penirq; + if (pdata->x_plate_ohms == 0) { + dev_err(&client->dev, "x_plate_ohms is not set up in platform data"); + err = -EINVAL; + goto err_free_mem; + } + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev)); @@ -307,6 +323,11 @@ static int __devinit tsc2007_probe(struct i2c_client *client, input_dev->phys = ts->phys; input_dev->id.bustype = BUS_I2C; + input_dev->open = tsc2007_open; + input_dev->close = tsc2007_close; + + input_set_drvdata(input_dev, ts); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); @@ -318,17 +339,14 @@ static int __devinit tsc2007_probe(struct i2c_client *client, if (pdata->init_platform_hw) pdata->init_platform_hw(); - err = request_irq(ts->irq, tsc2007_irq, 0, - client->dev.driver->name, ts); + err = request_threaded_irq(ts->irq, tsc2007_hard_irq, tsc2007_soft_irq, + IRQF_ONESHOT, client->dev.driver->name, ts); if (err < 0) { dev_err(&client->dev, "irq %d busy?\n", ts->irq); goto err_free_mem; } - /* Prepare for touch readings - power down ADC and enable PENIRQ */ - err = tsc2007_xfer(ts, PWRDOWN); - if (err < 0) - goto err_free_irq; + tsc2007_stop(ts); err = input_register_device(input_dev); if (err) @@ -339,7 +357,7 @@ static int __devinit tsc2007_probe(struct i2c_client *client, return 0; err_free_irq: - tsc2007_free_irq(ts); + free_irq(ts->irq, ts); if (pdata->exit_platform_hw) pdata->exit_platform_hw(); err_free_mem: @@ -353,7 +371,7 @@ static int __devexit tsc2007_remove(struct i2c_client *client) struct tsc2007 *ts = i2c_get_clientdata(client); struct tsc2007_platform_data *pdata = client->dev.platform_data; - tsc2007_free_irq(ts); + free_irq(ts->irq, ts); if (pdata->exit_platform_hw) pdata->exit_platform_hw(); diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c new file mode 100644 index 000000000000..29d5ed4dd31c --- /dev/null +++ b/drivers/input/touchscreen/tsc40.c @@ -0,0 +1,184 @@ +/* + * TSC-40 serial touchscreen driver. It should be compatible with + * TSC-10 and 25. + * + * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * License: GPLv2 as published by the FSF. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define PACKET_LENGTH 5 +struct tsc_ser { + struct input_dev *dev; + struct serio *serio; + u32 idx; + unsigned char data[PACKET_LENGTH]; + char phys[32]; +}; + +static void tsc_process_data(struct tsc_ser *ptsc) +{ + struct input_dev *dev = ptsc->dev; + u8 *data = ptsc->data; + u32 x; + u32 y; + + x = ((data[1] & 0x03) << 8) | data[2]; + y = ((data[3] & 0x03) << 8) | data[4]; + + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + input_report_key(dev, BTN_TOUCH, 1); + + input_sync(dev); +} + +static irqreturn_t tsc_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct tsc_ser *ptsc = serio_get_drvdata(serio); + struct input_dev *dev = ptsc->dev; + + ptsc->data[ptsc->idx] = data; + switch (ptsc->idx++) { + case 0: + if (unlikely((data & 0x3e) != 0x10)) { + dev_dbg(&serio->dev, + "unsynchronized packet start (0x%02x)\n", data); + ptsc->idx = 0; + } else if (!(data & 0x01)) { + input_report_key(dev, BTN_TOUCH, 0); + input_sync(dev); + ptsc->idx = 0; + } + break; + + case 1: + case 3: + if (unlikely(data & 0xfc)) { + dev_dbg(&serio->dev, + "unsynchronized data 0x%02x at offset %d\n", + data, ptsc->idx - 1); + ptsc->idx = 0; + } + break; + + case 4: + tsc_process_data(ptsc); + ptsc->idx = 0; + break; + } + + return IRQ_HANDLED; +} + +static int tsc_connect(struct serio *serio, struct serio_driver *drv) +{ + struct tsc_ser *ptsc; + struct input_dev *input_dev; + int error; + + ptsc = kzalloc(sizeof(struct tsc_ser), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ptsc || !input_dev) { + error = -ENOMEM; + goto fail1; + } + + ptsc->serio = serio; + ptsc->dev = input_dev; + snprintf(ptsc->phys, sizeof(ptsc->phys), "%s/input0", serio->phys); + + input_dev->name = "TSC-10/25/40 Serial TouchScreen"; + input_dev->phys = ptsc->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_TSC40; + input_dev->id.product = 40; + input_dev->id.version = 0x0001; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + __set_bit(BTN_TOUCH, input_dev->keybit); + input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0); + input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0); + input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0); + + serio_set_drvdata(serio, ptsc); + + error = serio_open(serio, drv); + if (error) + goto fail2; + + error = input_register_device(ptsc->dev); + if (error) + goto fail3; + + return 0; + +fail3: + serio_close(serio); +fail2: + serio_set_drvdata(serio, NULL); +fail1: + input_free_device(input_dev); + kfree(ptsc); + return error; +} + +static void tsc_disconnect(struct serio *serio) +{ + struct tsc_ser *ptsc = serio_get_drvdata(serio); + + serio_close(serio); + + input_unregister_device(ptsc->dev); + kfree(ptsc); + + serio_set_drvdata(serio, NULL); +} + +static struct serio_device_id tsc_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_TSC40, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; +MODULE_DEVICE_TABLE(serio, tsc_serio_ids); + +#define DRIVER_DESC "TSC-10/25/40 serial touchscreen driver" + +static struct serio_driver tsc_drv = { + .driver = { + .name = "tsc40", + }, + .description = DRIVER_DESC, + .id_table = tsc_serio_ids, + .interrupt = tsc_interrupt, + .connect = tsc_connect, + .disconnect = tsc_disconnect, +}; + +static int __init tsc_ser_init(void) +{ + return serio_register_driver(&tsc_drv); +} +module_init(tsc_ser_init); + +static void __exit tsc_exit(void) +{ + serio_unregister_driver(&tsc_drv); +} +module_exit(tsc_exit); + +MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c index 7a45d68c3516..217aa51135c5 100644 --- a/drivers/input/touchscreen/w90p910_ts.c +++ b/drivers/input/touchscreen/w90p910_ts.c @@ -279,7 +279,7 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev) w90p910_ts->irq_num = platform_get_irq(pdev, 0); if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt, - IRQF_DISABLED, "w90p910ts", w90p910_ts)) { + 0, "w90p910ts", w90p910_ts)) { err = -EBUSY; goto fail4; } diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index 9941d39df43d..1569a3934ab2 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -367,6 +367,20 @@ static int w8001_command(struct w8001 *w8001, unsigned char command, return rc; } +static int w8001_open(struct input_dev *dev) +{ + struct w8001 *w8001 = input_get_drvdata(dev); + + return w8001_command(w8001, W8001_CMD_START, false); +} + +static void w8001_close(struct input_dev *dev) +{ + struct w8001 *w8001 = input_get_drvdata(dev); + + w8001_command(w8001, W8001_CMD_STOP, false); +} + static int w8001_setup(struct w8001 *w8001) { struct input_dev *dev = w8001->dev; @@ -476,7 +490,7 @@ static int w8001_setup(struct w8001 *w8001) strlcat(w8001->name, " Touchscreen", sizeof(w8001->name)); - return w8001_command(w8001, W8001_CMD_START, false); + return 0; } /* @@ -487,12 +501,12 @@ static void w8001_disconnect(struct serio *serio) { struct w8001 *w8001 = serio_get_drvdata(serio); - input_get_device(w8001->dev); - input_unregister_device(w8001->dev); serio_close(serio); - serio_set_drvdata(serio, NULL); - input_put_device(w8001->dev); + + input_unregister_device(w8001->dev); kfree(w8001); + + serio_set_drvdata(serio, NULL); } /* @@ -536,6 +550,11 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv) input_dev->id.version = 0x0100; input_dev->dev.parent = &serio->dev; + input_dev->open = w8001_open; + input_dev->close = w8001_close; + + input_set_drvdata(input_dev, w8001); + err = input_register_device(w8001->dev); if (err) goto fail3; diff --git a/include/linux/bma150.h b/include/linux/bma150.h new file mode 100644 index 000000000000..7911fda23bb4 --- /dev/null +++ b/include/linux/bma150.h @@ -0,0 +1,46 @@ +/* + * Copyright (c) 2011 Bosch Sensortec GmbH + * Copyright (c) 2011 Unixphere + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _BMA150_H_ +#define _BMA150_H_ + +#define BMA150_DRIVER "bma150" + +struct bma150_cfg { + bool any_motion_int; /* Set to enable any-motion interrupt */ + bool hg_int; /* Set to enable high-G interrupt */ + bool lg_int; /* Set to enable low-G interrupt */ + unsigned char any_motion_dur; /* Any-motion duration */ + unsigned char any_motion_thres; /* Any-motion threshold */ + unsigned char hg_hyst; /* High-G hysterisis */ + unsigned char hg_dur; /* High-G duration */ + unsigned char hg_thres; /* High-G threshold */ + unsigned char lg_hyst; /* Low-G hysterisis */ + unsigned char lg_dur; /* Low-G duration */ + unsigned char lg_thres; /* Low-G threshold */ + unsigned char range; /* BMA0150_RANGE_xxx (in G) */ + unsigned char bandwidth; /* BMA0150_BW_xxx (in Hz) */ +}; + +struct bma150_platform_data { + struct bma150_cfg cfg; + int (*irq_gpio_cfg)(void); +}; + +#endif /* _BMA150_H_ */ diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h index 591427a63b06..506a9f7af51e 100644 --- a/include/linux/i2c/tsc2007.h +++ b/include/linux/i2c/tsc2007.h @@ -5,7 +5,7 @@ struct tsc2007_platform_data { u16 model; /* 2007. */ - u16 x_plate_ohms; + u16 x_plate_ohms; /* must be non-zero value */ u16 max_rt; /* max. resistance above which samples are ignored */ unsigned long poll_delay; /* delay (in ms) after pen-down event before polling starts */ diff --git a/include/linux/input.h b/include/linux/input.h index a637e7814334..6d5eddb18c82 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -505,6 +505,7 @@ struct input_keymap_entry { #define BTN_TOOL_FINGER 0x145 #define BTN_TOOL_MOUSE 0x146 #define BTN_TOOL_LENS 0x147 +#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ #define BTN_TOUCH 0x14a #define BTN_STYLUS 0x14b #define BTN_STYLUS2 0x14c @@ -1609,7 +1610,7 @@ struct ff_device { struct file *effect_owners[]; }; -int input_ff_create(struct input_dev *dev, int max_effects); +int input_ff_create(struct input_dev *dev, unsigned int max_effects); void input_ff_destroy(struct input_dev *dev); int input_ff_event(struct input_dev *dev, unsigned int type, unsigned int code, int value); diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h index ef792ecfaabf..1a05eee15e67 100644 --- a/include/linux/input/adp5589.h +++ b/include/linux/input/adp5589.h @@ -1,5 +1,5 @@ /* - * Analog Devices ADP5589 I/O Expander and QWERTY Keypad Controller + * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller * * Copyright 2010-2011 Analog Devices Inc. * @@ -9,89 +9,9 @@ #ifndef _ADP5589_H #define _ADP5589_H -#define ADP5589_ID 0x00 -#define ADP5589_INT_STATUS 0x01 -#define ADP5589_STATUS 0x02 -#define ADP5589_FIFO_1 0x03 -#define ADP5589_FIFO_2 0x04 -#define ADP5589_FIFO_3 0x05 -#define ADP5589_FIFO_4 0x06 -#define ADP5589_FIFO_5 0x07 -#define ADP5589_FIFO_6 0x08 -#define ADP5589_FIFO_7 0x09 -#define ADP5589_FIFO_8 0x0A -#define ADP5589_FIFO_9 0x0B -#define ADP5589_FIFO_10 0x0C -#define ADP5589_FIFO_11 0x0D -#define ADP5589_FIFO_12 0x0E -#define ADP5589_FIFO_13 0x0F -#define ADP5589_FIFO_14 0x10 -#define ADP5589_FIFO_15 0x11 -#define ADP5589_FIFO_16 0x12 -#define ADP5589_GPI_INT_STAT_A 0x13 -#define ADP5589_GPI_INT_STAT_B 0x14 -#define ADP5589_GPI_INT_STAT_C 0x15 -#define ADP5589_GPI_STATUS_A 0x16 -#define ADP5589_GPI_STATUS_B 0x17 -#define ADP5589_GPI_STATUS_C 0x18 -#define ADP5589_RPULL_CONFIG_A 0x19 -#define ADP5589_RPULL_CONFIG_B 0x1A -#define ADP5589_RPULL_CONFIG_C 0x1B -#define ADP5589_RPULL_CONFIG_D 0x1C -#define ADP5589_RPULL_CONFIG_E 0x1D -#define ADP5589_GPI_INT_LEVEL_A 0x1E -#define ADP5589_GPI_INT_LEVEL_B 0x1F -#define ADP5589_GPI_INT_LEVEL_C 0x20 -#define ADP5589_GPI_EVENT_EN_A 0x21 -#define ADP5589_GPI_EVENT_EN_B 0x22 -#define ADP5589_GPI_EVENT_EN_C 0x23 -#define ADP5589_GPI_INTERRUPT_EN_A 0x24 -#define ADP5589_GPI_INTERRUPT_EN_B 0x25 -#define ADP5589_GPI_INTERRUPT_EN_C 0x26 -#define ADP5589_DEBOUNCE_DIS_A 0x27 -#define ADP5589_DEBOUNCE_DIS_B 0x28 -#define ADP5589_DEBOUNCE_DIS_C 0x29 -#define ADP5589_GPO_DATA_OUT_A 0x2A -#define ADP5589_GPO_DATA_OUT_B 0x2B -#define ADP5589_GPO_DATA_OUT_C 0x2C -#define ADP5589_GPO_OUT_MODE_A 0x2D -#define ADP5589_GPO_OUT_MODE_B 0x2E -#define ADP5589_GPO_OUT_MODE_C 0x2F -#define ADP5589_GPIO_DIRECTION_A 0x30 -#define ADP5589_GPIO_DIRECTION_B 0x31 -#define ADP5589_GPIO_DIRECTION_C 0x32 -#define ADP5589_UNLOCK1 0x33 -#define ADP5589_UNLOCK2 0x34 -#define ADP5589_EXT_LOCK_EVENT 0x35 -#define ADP5589_UNLOCK_TIMERS 0x36 -#define ADP5589_LOCK_CFG 0x37 -#define ADP5589_RESET1_EVENT_A 0x38 -#define ADP5589_RESET1_EVENT_B 0x39 -#define ADP5589_RESET1_EVENT_C 0x3A -#define ADP5589_RESET2_EVENT_A 0x3B -#define ADP5589_RESET2_EVENT_B 0x3C -#define ADP5589_RESET_CFG 0x3D -#define ADP5589_PWM_OFFT_LOW 0x3E -#define ADP5589_PWM_OFFT_HIGH 0x3F -#define ADP5589_PWM_ONT_LOW 0x40 -#define ADP5589_PWM_ONT_HIGH 0x41 -#define ADP5589_PWM_CFG 0x42 -#define ADP5589_CLOCK_DIV_CFG 0x43 -#define ADP5589_LOGIC_1_CFG 0x44 -#define ADP5589_LOGIC_2_CFG 0x45 -#define ADP5589_LOGIC_FF_CFG 0x46 -#define ADP5589_LOGIC_INT_EVENT_EN 0x47 -#define ADP5589_POLL_PTIME_CFG 0x48 -#define ADP5589_PIN_CONFIG_A 0x49 -#define ADP5589_PIN_CONFIG_B 0x4A -#define ADP5589_PIN_CONFIG_C 0x4B -#define ADP5589_PIN_CONFIG_D 0x4C -#define ADP5589_GENERAL_CFG 0x4D -#define ADP5589_INT_EN 0x4E - -#define ADP5589_DEVICE_ID_MASK 0xF - -/* Put one of these structures in i2c_board_info platform_data */ +/* + * ADP5589 specific GPI and Keymap defines + */ #define ADP5589_KEYMAPSIZE 88 @@ -127,6 +47,35 @@ #define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1) +/* + * ADP5585 specific GPI and Keymap defines + */ + +#define ADP5585_KEYMAPSIZE 30 + +#define ADP5585_GPI_PIN_ROW0 37 +#define ADP5585_GPI_PIN_ROW1 38 +#define ADP5585_GPI_PIN_ROW2 39 +#define ADP5585_GPI_PIN_ROW3 40 +#define ADP5585_GPI_PIN_ROW4 41 +#define ADP5585_GPI_PIN_ROW5 42 +#define ADP5585_GPI_PIN_COL0 43 +#define ADP5585_GPI_PIN_COL1 44 +#define ADP5585_GPI_PIN_COL2 45 +#define ADP5585_GPI_PIN_COL3 46 +#define ADP5585_GPI_PIN_COL4 47 +#define GPI_LOGIC 48 + +#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0 +#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5 +#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0 +#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4 + +#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE +#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END + +#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1) + struct adp5589_gpi_map { unsigned short pin; unsigned short sw_evt; @@ -159,7 +108,7 @@ struct adp5589_gpi_map { #define RESET2_POL_HIGH (1 << 7) #define RESET2_POL_LOW (0 << 7) -/* Mask Bits: +/* ADP5589 Mask Bits: * C C C C C C C C C C C | R R R R R R R R * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0 * 0 @@ -168,18 +117,44 @@ struct adp5589_gpi_map { * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0 */ -#define ADP_ROW(x) (1 << (x)) -#define ADP_COL(x) (1 << (x + 8)) +#define ADP_ROW(x) (1 << (x)) +#define ADP_COL(x) (1 << (x + 8)) +#define ADP5589_ROW_MASK 0xFF +#define ADP5589_COL_MASK 0xFF +#define ADP5589_COL_SHIFT 8 +#define ADP5589_MAX_ROW_NUM 7 +#define ADP5589_MAX_COL_NUM 10 + +/* ADP5585 Mask Bits: + * C C C C C | R R R R R R + * 4 3 2 1 0 | 5 4 3 2 1 0 + * + * ---- BIT -- ----------- + * 1 0 0 0 0 | 0 0 0 0 0 0 + * 0 9 8 7 6 | 5 4 3 2 1 0 + */ + +#define ADP5585_ROW_MASK 0x3F +#define ADP5585_COL_MASK 0x1F +#define ADP5585_ROW_SHIFT 0 +#define ADP5585_COL_SHIFT 6 +#define ADP5585_MAX_ROW_NUM 5 +#define ADP5585_MAX_COL_NUM 4 + +#define ADP5585_ROW(x) (1 << ((x) & ADP5585_ROW_MASK)) +#define ADP5585_COL(x) (1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT)) + +/* Put one of these structures in i2c_board_info platform_data */ struct adp5589_kpad_platform_data { unsigned keypad_en_mask; /* Keypad (Rows/Columns) enable mask */ const unsigned short *keymap; /* Pointer to keymap */ unsigned short keymapsize; /* Keymap size */ bool repeat; /* Enable key repeat */ - bool en_keylock; /* Enable key lock feature */ - unsigned char unlock_key1; /* Unlock Key 1 */ - unsigned char unlock_key2; /* Unlock Key 2 */ - unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable */ + bool en_keylock; /* Enable key lock feature (ADP5589 only)*/ + unsigned char unlock_key1; /* Unlock Key 1 (ADP5589 only) */ + unsigned char unlock_key2; /* Unlock Key 2 (ADP5589 only) */ + unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable (ADP5589 only) */ unsigned char scan_cycle_time; /* Time between consecutive scan cycles */ unsigned char reset_cfg; /* Reset config */ unsigned short reset1_key_1; /* Reset Key 1 */ diff --git a/include/linux/input/adxl34x.h b/include/linux/input/adxl34x.h index df00d998a44a..57e01a7cb006 100644 --- a/include/linux/input/adxl34x.h +++ b/include/linux/input/adxl34x.h @@ -30,8 +30,9 @@ struct adxl34x_platform_data { * Y, or Z participation in Tap detection. A '0' excludes the * selected axis from participation in Tap detection. * Setting the SUPPRESS bit suppresses Double Tap detection if - * acceleration greater than tap_threshold is present between - * taps. + * acceleration greater than tap_threshold is present during the + * tap_latency period, i.e. after the first tap but before the + * opening of the second tap window. */ #define ADXL_SUPPRESS (1 << 3) @@ -226,13 +227,13 @@ struct adxl34x_platform_data { * detection will begin and prevent the detection of activity. This * bit serially links the activity and inactivity functions. When '0' * the inactivity and activity functions are concurrent. Additional - * information can be found in the Application section under Link - * Mode. + * information can be found in the ADXL34x datasheet's Application + * section under Link Mode. * AUTO_SLEEP: A '1' sets the ADXL34x to switch to Sleep Mode * when inactivity (acceleration has been below inactivity_threshold * for at least inactivity_time) is detected and the LINK bit is set. - * A '0' disables automatic switching to Sleep Mode. See SLEEP - * for further description. + * A '0' disables automatic switching to Sleep Mode. See the + * Sleep Bit section of the ADXL34x datasheet for more information. */ #define ADXL_LINK (1 << 5) @@ -266,6 +267,12 @@ struct adxl34x_platform_data { u8 watermark; + /* + * When acceleration measurements are received from the ADXL34x + * events are sent to the event subsystem. The following settings + * select the event type and event code for new x, y and z axis data + * respectively. + */ u32 ev_type; /* EV_ABS or EV_REL */ u32 ev_code_x; /* ABS_X,Y,Z or REL_X,Y,Z */ @@ -289,7 +296,7 @@ struct adxl34x_platform_data { u32 ev_code_act_inactivity; /* EV_KEY */ /* - * Use ADXL34x INT2 instead of INT1 + * Use ADXL34x INT2 pin instead of INT1 pin for interrupt output */ u8 use_int2; diff --git a/include/linux/serio.h b/include/linux/serio.h index e26f4788845f..be7dfb0f12d0 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -199,5 +199,6 @@ static inline void serio_continue_rx(struct serio *serio) #define SERIO_DYNAPRO 0x3a #define SERIO_HAMPSHIRE 0x3b #define SERIO_PS2MULT 0x3c +#define SERIO_TSC40 0x3d #endif diff --git a/include/linux/uinput.h b/include/linux/uinput.h index d28c726ede4f..2aa2881b0df9 100644 --- a/include/linux/uinput.h +++ b/include/linux/uinput.h @@ -68,7 +68,7 @@ struct uinput_device { unsigned char head; unsigned char tail; struct input_event buff[UINPUT_BUFFER_SIZE]; - int ff_effects_max; + unsigned int ff_effects_max; struct uinput_request *requests[UINPUT_NUM_REQUESTS]; wait_queue_head_t requests_waitq; |